From 5e45211a64149b3c659b90ff2de6fa982a5a93ed Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 4 May 2024 14:17:33 +0200 Subject: Adding upstream version 15.5. Signed-off-by: Daniel Baumann --- src/backend/optimizer/util/relnode.c | 2047 ++++++++++++++++++++++++++++++++++ 1 file changed, 2047 insertions(+) create mode 100644 src/backend/optimizer/util/relnode.c (limited to 'src/backend/optimizer/util/relnode.c') diff --git a/src/backend/optimizer/util/relnode.c b/src/backend/optimizer/util/relnode.c new file mode 100644 index 0000000..3c75fd5 --- /dev/null +++ b/src/backend/optimizer/util/relnode.c @@ -0,0 +1,2047 @@ +/*------------------------------------------------------------------------- + * + * relnode.c + * Relation-node lookup/construction routines + * + * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group + * Portions Copyright (c) 1994, Regents of the University of California + * + * + * IDENTIFICATION + * src/backend/optimizer/util/relnode.c + * + *------------------------------------------------------------------------- + */ +#include "postgres.h" + +#include + +#include "miscadmin.h" +#include "nodes/nodeFuncs.h" +#include "optimizer/appendinfo.h" +#include "optimizer/clauses.h" +#include "optimizer/cost.h" +#include "optimizer/inherit.h" +#include "optimizer/pathnode.h" +#include "optimizer/paths.h" +#include "optimizer/placeholder.h" +#include "optimizer/plancat.h" +#include "optimizer/restrictinfo.h" +#include "optimizer/tlist.h" +#include "utils/hsearch.h" +#include "utils/lsyscache.h" + + +typedef struct JoinHashEntry +{ + Relids join_relids; /* hash key --- MUST BE FIRST */ + RelOptInfo *join_rel; +} JoinHashEntry; + +static void build_joinrel_tlist(PlannerInfo *root, RelOptInfo *joinrel, + RelOptInfo *input_rel); +static List *build_joinrel_restrictlist(PlannerInfo *root, + RelOptInfo *joinrel, + RelOptInfo *outer_rel, + RelOptInfo *inner_rel); +static void build_joinrel_joinlist(RelOptInfo *joinrel, + RelOptInfo *outer_rel, + RelOptInfo *inner_rel); +static List *subbuild_joinrel_restrictlist(RelOptInfo *joinrel, + List *joininfo_list, + List *new_restrictlist); +static List *subbuild_joinrel_joinlist(RelOptInfo *joinrel, + List *joininfo_list, + List *new_joininfo); +static void set_foreign_rel_properties(RelOptInfo *joinrel, + RelOptInfo *outer_rel, RelOptInfo *inner_rel); +static void add_join_rel(PlannerInfo *root, RelOptInfo *joinrel); +static void build_joinrel_partition_info(RelOptInfo *joinrel, + RelOptInfo *outer_rel, RelOptInfo *inner_rel, + List *restrictlist, JoinType jointype); +static bool have_partkey_equi_join(RelOptInfo *joinrel, + RelOptInfo *rel1, RelOptInfo *rel2, + JoinType jointype, List *restrictlist); +static int match_expr_to_partition_keys(Expr *expr, RelOptInfo *rel, + bool strict_op); +static void set_joinrel_partition_key_exprs(RelOptInfo *joinrel, + RelOptInfo *outer_rel, RelOptInfo *inner_rel, + JoinType jointype); +static void build_child_join_reltarget(PlannerInfo *root, + RelOptInfo *parentrel, + RelOptInfo *childrel, + int nappinfos, + AppendRelInfo **appinfos); + + +/* + * setup_simple_rel_arrays + * Prepare the arrays we use for quickly accessing base relations + * and AppendRelInfos. + */ +void +setup_simple_rel_arrays(PlannerInfo *root) +{ + int size; + Index rti; + ListCell *lc; + + /* Arrays are accessed using RT indexes (1..N) */ + size = list_length(root->parse->rtable) + 1; + root->simple_rel_array_size = size; + + /* + * simple_rel_array is initialized to all NULLs, since no RelOptInfos + * exist yet. It'll be filled by later calls to build_simple_rel(). + */ + root->simple_rel_array = (RelOptInfo **) + palloc0(size * sizeof(RelOptInfo *)); + + /* simple_rte_array is an array equivalent of the rtable list */ + root->simple_rte_array = (RangeTblEntry **) + palloc0(size * sizeof(RangeTblEntry *)); + rti = 1; + foreach(lc, root->parse->rtable) + { + RangeTblEntry *rte = (RangeTblEntry *) lfirst(lc); + + root->simple_rte_array[rti++] = rte; + } + + /* append_rel_array is not needed if there are no AppendRelInfos */ + if (root->append_rel_list == NIL) + { + root->append_rel_array = NULL; + return; + } + + root->append_rel_array = (AppendRelInfo **) + palloc0(size * sizeof(AppendRelInfo *)); + + /* + * append_rel_array is filled with any already-existing AppendRelInfos, + * which currently could only come from UNION ALL flattening. We might + * add more later during inheritance expansion, but it's the + * responsibility of the expansion code to update the array properly. + */ + foreach(lc, root->append_rel_list) + { + AppendRelInfo *appinfo = lfirst_node(AppendRelInfo, lc); + int child_relid = appinfo->child_relid; + + /* Sanity check */ + Assert(child_relid < size); + + if (root->append_rel_array[child_relid]) + elog(ERROR, "child relation already exists"); + + root->append_rel_array[child_relid] = appinfo; + } +} + +/* + * expand_planner_arrays + * Expand the PlannerInfo's per-RTE arrays by add_size members + * and initialize the newly added entries to NULLs + * + * Note: this causes the append_rel_array to become allocated even if + * it was not before. This is okay for current uses, because we only call + * this when adding child relations, which always have AppendRelInfos. + */ +void +expand_planner_arrays(PlannerInfo *root, int add_size) +{ + int new_size; + + Assert(add_size > 0); + + new_size = root->simple_rel_array_size + add_size; + + root->simple_rel_array = (RelOptInfo **) + repalloc(root->simple_rel_array, + sizeof(RelOptInfo *) * new_size); + MemSet(root->simple_rel_array + root->simple_rel_array_size, + 0, sizeof(RelOptInfo *) * add_size); + + root->simple_rte_array = (RangeTblEntry **) + repalloc(root->simple_rte_array, + sizeof(RangeTblEntry *) * new_size); + MemSet(root->simple_rte_array + root->simple_rel_array_size, + 0, sizeof(RangeTblEntry *) * add_size); + + if (root->append_rel_array) + { + root->append_rel_array = (AppendRelInfo **) + repalloc(root->append_rel_array, + sizeof(AppendRelInfo *) * new_size); + MemSet(root->append_rel_array + root->simple_rel_array_size, + 0, sizeof(AppendRelInfo *) * add_size); + } + else + { + root->append_rel_array = (AppendRelInfo **) + palloc0(sizeof(AppendRelInfo *) * new_size); + } + + root->simple_rel_array_size = new_size; +} + +/* + * build_simple_rel + * Construct a new RelOptInfo for a base relation or 'other' relation. + */ +RelOptInfo * +build_simple_rel(PlannerInfo *root, int relid, RelOptInfo *parent) +{ + RelOptInfo *rel; + RangeTblEntry *rte; + + /* Rel should not exist already */ + Assert(relid > 0 && relid < root->simple_rel_array_size); + if (root->simple_rel_array[relid] != NULL) + elog(ERROR, "rel %d already exists", relid); + + /* Fetch RTE for relation */ + rte = root->simple_rte_array[relid]; + Assert(rte != NULL); + + rel = makeNode(RelOptInfo); + rel->reloptkind = parent ? RELOPT_OTHER_MEMBER_REL : RELOPT_BASEREL; + rel->relids = bms_make_singleton(relid); + rel->rows = 0; + /* cheap startup cost is interesting iff not all tuples to be retrieved */ + rel->consider_startup = (root->tuple_fraction > 0); + rel->consider_param_startup = false; /* might get changed later */ + rel->consider_parallel = false; /* might get changed later */ + rel->reltarget = create_empty_pathtarget(); + rel->pathlist = NIL; + rel->ppilist = NIL; + rel->partial_pathlist = NIL; + rel->cheapest_startup_path = NULL; + rel->cheapest_total_path = NULL; + rel->cheapest_unique_path = NULL; + rel->cheapest_parameterized_paths = NIL; + rel->relid = relid; + rel->rtekind = rte->rtekind; + /* min_attr, max_attr, attr_needed, attr_widths are set below */ + rel->lateral_vars = NIL; + rel->indexlist = NIL; + rel->statlist = NIL; + rel->pages = 0; + rel->tuples = 0; + rel->allvisfrac = 0; + rel->eclass_indexes = NULL; + rel->subroot = NULL; + rel->subplan_params = NIL; + rel->rel_parallel_workers = -1; /* set up in get_relation_info */ + rel->amflags = 0; + rel->serverid = InvalidOid; + rel->userid = rte->checkAsUser; + rel->useridiscurrent = false; + rel->fdwroutine = NULL; + rel->fdw_private = NULL; + rel->unique_for_rels = NIL; + rel->non_unique_for_rels = NIL; + rel->baserestrictinfo = NIL; + rel->baserestrictcost.startup = 0; + rel->baserestrictcost.per_tuple = 0; + rel->baserestrict_min_security = UINT_MAX; + rel->joininfo = NIL; + rel->has_eclass_joins = false; + rel->consider_partitionwise_join = false; /* might get changed later */ + rel->part_scheme = NULL; + rel->nparts = -1; + rel->boundinfo = NULL; + rel->partbounds_merged = false; + rel->partition_qual = NIL; + rel->part_rels = NULL; + rel->live_parts = NULL; + rel->all_partrels = NULL; + rel->partexprs = NULL; + rel->nullable_partexprs = NULL; + + /* + * Pass assorted information down the inheritance hierarchy. + */ + if (parent) + { + /* + * Each direct or indirect child wants to know the relids of its + * topmost parent. + */ + if (parent->top_parent_relids) + rel->top_parent_relids = parent->top_parent_relids; + else + rel->top_parent_relids = bms_copy(parent->relids); + + /* + * Also propagate lateral-reference information from appendrel parent + * rels to their child rels. We intentionally give each child rel the + * same minimum parameterization, even though it's quite possible that + * some don't reference all the lateral rels. This is because any + * append path for the parent will have to have the same + * parameterization for every child anyway, and there's no value in + * forcing extra reparameterize_path() calls. Similarly, a lateral + * reference to the parent prevents use of otherwise-movable join rels + * for each child. + * + * It's possible for child rels to have their own children, in which + * case the topmost parent's lateral info propagates all the way down. + */ + rel->direct_lateral_relids = parent->direct_lateral_relids; + rel->lateral_relids = parent->lateral_relids; + rel->lateral_referencers = parent->lateral_referencers; + } + else + { + rel->top_parent_relids = NULL; + rel->direct_lateral_relids = NULL; + rel->lateral_relids = NULL; + rel->lateral_referencers = NULL; + } + + /* Check type of rtable entry */ + switch (rte->rtekind) + { + case RTE_RELATION: + /* Table --- retrieve statistics from the system catalogs */ + get_relation_info(root, rte->relid, rte->inh, rel); + break; + case RTE_SUBQUERY: + case RTE_FUNCTION: + case RTE_TABLEFUNC: + case RTE_VALUES: + case RTE_CTE: + case RTE_NAMEDTUPLESTORE: + + /* + * Subquery, function, tablefunc, values list, CTE, or ENR --- set + * up attr range and arrays + * + * Note: 0 is included in range to support whole-row Vars + */ + rel->min_attr = 0; + rel->max_attr = list_length(rte->eref->colnames); + rel->attr_needed = (Relids *) + palloc0((rel->max_attr - rel->min_attr + 1) * sizeof(Relids)); + rel->attr_widths = (int32 *) + palloc0((rel->max_attr - rel->min_attr + 1) * sizeof(int32)); + break; + case RTE_RESULT: + /* RTE_RESULT has no columns, nor could it have whole-row Var */ + rel->min_attr = 0; + rel->max_attr = -1; + rel->attr_needed = NULL; + rel->attr_widths = NULL; + break; + default: + elog(ERROR, "unrecognized RTE kind: %d", + (int) rte->rtekind); + break; + } + + /* + * Copy the parent's quals to the child, with appropriate substitution of + * variables. If any constant false or NULL clauses turn up, we can mark + * the child as dummy right away. (We must do this immediately so that + * pruning works correctly when recursing in expand_partitioned_rtentry.) + */ + if (parent) + { + AppendRelInfo *appinfo = root->append_rel_array[relid]; + + Assert(appinfo != NULL); + if (!apply_child_basequals(root, parent, rel, rte, appinfo)) + { + /* + * Some restriction clause reduced to constant FALSE or NULL after + * substitution, so this child need not be scanned. + */ + mark_dummy_rel(rel); + } + } + + /* Save the finished struct in the query's simple_rel_array */ + root->simple_rel_array[relid] = rel; + + return rel; +} + +/* + * find_base_rel + * Find a base or other relation entry, which must already exist. + */ +RelOptInfo * +find_base_rel(PlannerInfo *root, int relid) +{ + RelOptInfo *rel; + + Assert(relid > 0); + + if (relid < root->simple_rel_array_size) + { + rel = root->simple_rel_array[relid]; + if (rel) + return rel; + } + + elog(ERROR, "no relation entry for relid %d", relid); + + return NULL; /* keep compiler quiet */ +} + +/* + * build_join_rel_hash + * Construct the auxiliary hash table for join relations. + */ +static void +build_join_rel_hash(PlannerInfo *root) +{ + HTAB *hashtab; + HASHCTL hash_ctl; + ListCell *l; + + /* Create the hash table */ + hash_ctl.keysize = sizeof(Relids); + hash_ctl.entrysize = sizeof(JoinHashEntry); + hash_ctl.hash = bitmap_hash; + hash_ctl.match = bitmap_match; + hash_ctl.hcxt = CurrentMemoryContext; + hashtab = hash_create("JoinRelHashTable", + 256L, + &hash_ctl, + HASH_ELEM | HASH_FUNCTION | HASH_COMPARE | HASH_CONTEXT); + + /* Insert all the already-existing joinrels */ + foreach(l, root->join_rel_list) + { + RelOptInfo *rel = (RelOptInfo *) lfirst(l); + JoinHashEntry *hentry; + bool found; + + hentry = (JoinHashEntry *) hash_search(hashtab, + &(rel->relids), + HASH_ENTER, + &found); + Assert(!found); + hentry->join_rel = rel; + } + + root->join_rel_hash = hashtab; +} + +/* + * find_join_rel + * Returns relation entry corresponding to 'relids' (a set of RT indexes), + * or NULL if none exists. This is for join relations. + */ +RelOptInfo * +find_join_rel(PlannerInfo *root, Relids relids) +{ + /* + * Switch to using hash lookup when list grows "too long". The threshold + * is arbitrary and is known only here. + */ + if (!root->join_rel_hash && list_length(root->join_rel_list) > 32) + build_join_rel_hash(root); + + /* + * Use either hashtable lookup or linear search, as appropriate. + * + * Note: the seemingly redundant hashkey variable is used to avoid taking + * the address of relids; unless the compiler is exceedingly smart, doing + * so would force relids out of a register and thus probably slow down the + * list-search case. + */ + if (root->join_rel_hash) + { + Relids hashkey = relids; + JoinHashEntry *hentry; + + hentry = (JoinHashEntry *) hash_search(root->join_rel_hash, + &hashkey, + HASH_FIND, + NULL); + if (hentry) + return hentry->join_rel; + } + else + { + ListCell *l; + + foreach(l, root->join_rel_list) + { + RelOptInfo *rel = (RelOptInfo *) lfirst(l); + + if (bms_equal(rel->relids, relids)) + return rel; + } + } + + return NULL; +} + +/* + * set_foreign_rel_properties + * Set up foreign-join fields if outer and inner relation are foreign + * tables (or joins) belonging to the same server and assigned to the same + * user to check access permissions as. + * + * In addition to an exact match of userid, we allow the case where one side + * has zero userid (implying current user) and the other side has explicit + * userid that happens to equal the current user; but in that case, pushdown of + * the join is only valid for the current user. The useridiscurrent field + * records whether we had to make such an assumption for this join or any + * sub-join. + * + * Otherwise these fields are left invalid, so GetForeignJoinPaths will not be + * called for the join relation. + * + */ +static void +set_foreign_rel_properties(RelOptInfo *joinrel, RelOptInfo *outer_rel, + RelOptInfo *inner_rel) +{ + if (OidIsValid(outer_rel->serverid) && + inner_rel->serverid == outer_rel->serverid) + { + if (inner_rel->userid == outer_rel->userid) + { + joinrel->serverid = outer_rel->serverid; + joinrel->userid = outer_rel->userid; + joinrel->useridiscurrent = outer_rel->useridiscurrent || inner_rel->useridiscurrent; + joinrel->fdwroutine = outer_rel->fdwroutine; + } + else if (!OidIsValid(inner_rel->userid) && + outer_rel->userid == GetUserId()) + { + joinrel->serverid = outer_rel->serverid; + joinrel->userid = outer_rel->userid; + joinrel->useridiscurrent = true; + joinrel->fdwroutine = outer_rel->fdwroutine; + } + else if (!OidIsValid(outer_rel->userid) && + inner_rel->userid == GetUserId()) + { + joinrel->serverid = outer_rel->serverid; + joinrel->userid = inner_rel->userid; + joinrel->useridiscurrent = true; + joinrel->fdwroutine = outer_rel->fdwroutine; + } + } +} + +/* + * add_join_rel + * Add given join relation to the list of join relations in the given + * PlannerInfo. Also add it to the auxiliary hashtable if there is one. + */ +static void +add_join_rel(PlannerInfo *root, RelOptInfo *joinrel) +{ + /* GEQO requires us to append the new joinrel to the end of the list! */ + root->join_rel_list = lappend(root->join_rel_list, joinrel); + + /* store it into the auxiliary hashtable if there is one. */ + if (root->join_rel_hash) + { + JoinHashEntry *hentry; + bool found; + + hentry = (JoinHashEntry *) hash_search(root->join_rel_hash, + &(joinrel->relids), + HASH_ENTER, + &found); + Assert(!found); + hentry->join_rel = joinrel; + } +} + +/* + * build_join_rel + * Returns relation entry corresponding to the union of two given rels, + * creating a new relation entry if none already exists. + * + * 'joinrelids' is the Relids set that uniquely identifies the join + * 'outer_rel' and 'inner_rel' are relation nodes for the relations to be + * joined + * 'sjinfo': join context info + * 'restrictlist_ptr': result variable. If not NULL, *restrictlist_ptr + * receives the list of RestrictInfo nodes that apply to this + * particular pair of joinable relations. + * + * restrictlist_ptr makes the routine's API a little grotty, but it saves + * duplicated calculation of the restrictlist... + */ +RelOptInfo * +build_join_rel(PlannerInfo *root, + Relids joinrelids, + RelOptInfo *outer_rel, + RelOptInfo *inner_rel, + SpecialJoinInfo *sjinfo, + List **restrictlist_ptr) +{ + RelOptInfo *joinrel; + List *restrictlist; + + /* This function should be used only for join between parents. */ + Assert(!IS_OTHER_REL(outer_rel) && !IS_OTHER_REL(inner_rel)); + + /* + * See if we already have a joinrel for this set of base rels. + */ + joinrel = find_join_rel(root, joinrelids); + + if (joinrel) + { + /* + * Yes, so we only need to figure the restrictlist for this particular + * pair of component relations. + */ + if (restrictlist_ptr) + *restrictlist_ptr = build_joinrel_restrictlist(root, + joinrel, + outer_rel, + inner_rel); + return joinrel; + } + + /* + * Nope, so make one. + */ + joinrel = makeNode(RelOptInfo); + joinrel->reloptkind = RELOPT_JOINREL; + joinrel->relids = bms_copy(joinrelids); + joinrel->rows = 0; + /* cheap startup cost is interesting iff not all tuples to be retrieved */ + joinrel->consider_startup = (root->tuple_fraction > 0); + joinrel->consider_param_startup = false; + joinrel->consider_parallel = false; + joinrel->reltarget = create_empty_pathtarget(); + joinrel->pathlist = NIL; + joinrel->ppilist = NIL; + joinrel->partial_pathlist = NIL; + joinrel->cheapest_startup_path = NULL; + joinrel->cheapest_total_path = NULL; + joinrel->cheapest_unique_path = NULL; + joinrel->cheapest_parameterized_paths = NIL; + /* init direct_lateral_relids from children; we'll finish it up below */ + joinrel->direct_lateral_relids = + bms_union(outer_rel->direct_lateral_relids, + inner_rel->direct_lateral_relids); + joinrel->lateral_relids = min_join_parameterization(root, joinrel->relids, + outer_rel, inner_rel); + joinrel->relid = 0; /* indicates not a baserel */ + joinrel->rtekind = RTE_JOIN; + joinrel->min_attr = 0; + joinrel->max_attr = 0; + joinrel->attr_needed = NULL; + joinrel->attr_widths = NULL; + joinrel->lateral_vars = NIL; + joinrel->lateral_referencers = NULL; + joinrel->indexlist = NIL; + joinrel->statlist = NIL; + joinrel->pages = 0; + joinrel->tuples = 0; + joinrel->allvisfrac = 0; + joinrel->eclass_indexes = NULL; + joinrel->subroot = NULL; + joinrel->subplan_params = NIL; + joinrel->rel_parallel_workers = -1; + joinrel->amflags = 0; + joinrel->serverid = InvalidOid; + joinrel->userid = InvalidOid; + joinrel->useridiscurrent = false; + joinrel->fdwroutine = NULL; + joinrel->fdw_private = NULL; + joinrel->unique_for_rels = NIL; + joinrel->non_unique_for_rels = NIL; + joinrel->baserestrictinfo = NIL; + joinrel->baserestrictcost.startup = 0; + joinrel->baserestrictcost.per_tuple = 0; + joinrel->baserestrict_min_security = UINT_MAX; + joinrel->joininfo = NIL; + joinrel->has_eclass_joins = false; + joinrel->consider_partitionwise_join = false; /* might get changed later */ + joinrel->top_parent_relids = NULL; + joinrel->part_scheme = NULL; + joinrel->nparts = -1; + joinrel->boundinfo = NULL; + joinrel->partbounds_merged = false; + joinrel->partition_qual = NIL; + joinrel->part_rels = NULL; + joinrel->live_parts = NULL; + joinrel->all_partrels = NULL; + joinrel->partexprs = NULL; + joinrel->nullable_partexprs = NULL; + + /* Compute information relevant to the foreign relations. */ + set_foreign_rel_properties(joinrel, outer_rel, inner_rel); + + /* + * Create a new tlist containing just the vars that need to be output from + * this join (ie, are needed for higher joinclauses or final output). + * + * NOTE: the tlist order for a join rel will depend on which pair of outer + * and inner rels we first try to build it from. But the contents should + * be the same regardless. + */ + build_joinrel_tlist(root, joinrel, outer_rel); + build_joinrel_tlist(root, joinrel, inner_rel); + add_placeholders_to_joinrel(root, joinrel, outer_rel, inner_rel); + + /* + * add_placeholders_to_joinrel also took care of adding the ph_lateral + * sets of any PlaceHolderVars computed here to direct_lateral_relids, so + * now we can finish computing that. This is much like the computation of + * the transitively-closed lateral_relids in min_join_parameterization, + * except that here we *do* have to consider the added PHVs. + */ + joinrel->direct_lateral_relids = + bms_del_members(joinrel->direct_lateral_relids, joinrel->relids); + if (bms_is_empty(joinrel->direct_lateral_relids)) + joinrel->direct_lateral_relids = NULL; + + /* + * Construct restrict and join clause lists for the new joinrel. (The + * caller might or might not need the restrictlist, but I need it anyway + * for set_joinrel_size_estimates().) + */ + restrictlist = build_joinrel_restrictlist(root, joinrel, + outer_rel, inner_rel); + if (restrictlist_ptr) + *restrictlist_ptr = restrictlist; + build_joinrel_joinlist(joinrel, outer_rel, inner_rel); + + /* + * This is also the right place to check whether the joinrel has any + * pending EquivalenceClass joins. + */ + joinrel->has_eclass_joins = has_relevant_eclass_joinclause(root, joinrel); + + /* Store the partition information. */ + build_joinrel_partition_info(joinrel, outer_rel, inner_rel, restrictlist, + sjinfo->jointype); + + /* + * Set estimates of the joinrel's size. + */ + set_joinrel_size_estimates(root, joinrel, outer_rel, inner_rel, + sjinfo, restrictlist); + + /* + * Set the consider_parallel flag if this joinrel could potentially be + * scanned within a parallel worker. If this flag is false for either + * inner_rel or outer_rel, then it must be false for the joinrel also. + * Even if both are true, there might be parallel-restricted expressions + * in the targetlist or quals. + * + * Note that if there are more than two rels in this relation, they could + * be divided between inner_rel and outer_rel in any arbitrary way. We + * assume this doesn't matter, because we should hit all the same baserels + * and joinclauses while building up to this joinrel no matter which we + * take; therefore, we should make the same decision here however we get + * here. + */ + if (inner_rel->consider_parallel && outer_rel->consider_parallel && + is_parallel_safe(root, (Node *) restrictlist) && + is_parallel_safe(root, (Node *) joinrel->reltarget->exprs)) + joinrel->consider_parallel = true; + + /* Add the joinrel to the PlannerInfo. */ + add_join_rel(root, joinrel); + + /* + * Also, if dynamic-programming join search is active, add the new joinrel + * to the appropriate sublist. Note: you might think the Assert on number + * of members should be for equality, but some of the level 1 rels might + * have been joinrels already, so we can only assert <=. + */ + if (root->join_rel_level) + { + Assert(root->join_cur_level > 0); + Assert(root->join_cur_level <= bms_num_members(joinrel->relids)); + root->join_rel_level[root->join_cur_level] = + lappend(root->join_rel_level[root->join_cur_level], joinrel); + } + + return joinrel; +} + +/* + * build_child_join_rel + * Builds RelOptInfo representing join between given two child relations. + * + * 'outer_rel' and 'inner_rel' are the RelOptInfos of child relations being + * joined + * 'parent_joinrel' is the RelOptInfo representing the join between parent + * relations. Some of the members of new RelOptInfo are produced by + * translating corresponding members of this RelOptInfo + * 'sjinfo': child-join context info + * 'restrictlist': list of RestrictInfo nodes that apply to this particular + * pair of joinable relations + * 'jointype' is the join type (inner, left, full, etc) + */ +RelOptInfo * +build_child_join_rel(PlannerInfo *root, RelOptInfo *outer_rel, + RelOptInfo *inner_rel, RelOptInfo *parent_joinrel, + List *restrictlist, SpecialJoinInfo *sjinfo, + JoinType jointype) +{ + RelOptInfo *joinrel = makeNode(RelOptInfo); + AppendRelInfo **appinfos; + int nappinfos; + + /* Only joins between "other" relations land here. */ + Assert(IS_OTHER_REL(outer_rel) && IS_OTHER_REL(inner_rel)); + + /* The parent joinrel should have consider_partitionwise_join set. */ + Assert(parent_joinrel->consider_partitionwise_join); + + joinrel->reloptkind = RELOPT_OTHER_JOINREL; + joinrel->relids = bms_union(outer_rel->relids, inner_rel->relids); + joinrel->rows = 0; + /* cheap startup cost is interesting iff not all tuples to be retrieved */ + joinrel->consider_startup = (root->tuple_fraction > 0); + joinrel->consider_param_startup = false; + joinrel->consider_parallel = false; + joinrel->reltarget = create_empty_pathtarget(); + joinrel->pathlist = NIL; + joinrel->ppilist = NIL; + joinrel->partial_pathlist = NIL; + joinrel->cheapest_startup_path = NULL; + joinrel->cheapest_total_path = NULL; + joinrel->cheapest_unique_path = NULL; + joinrel->cheapest_parameterized_paths = NIL; + joinrel->direct_lateral_relids = NULL; + joinrel->lateral_relids = NULL; + joinrel->relid = 0; /* indicates not a baserel */ + joinrel->rtekind = RTE_JOIN; + joinrel->min_attr = 0; + joinrel->max_attr = 0; + joinrel->attr_needed = NULL; + joinrel->attr_widths = NULL; + joinrel->lateral_vars = NIL; + joinrel->lateral_referencers = NULL; + joinrel->indexlist = NIL; + joinrel->pages = 0; + joinrel->tuples = 0; + joinrel->allvisfrac = 0; + joinrel->eclass_indexes = NULL; + joinrel->subroot = NULL; + joinrel->subplan_params = NIL; + joinrel->amflags = 0; + joinrel->serverid = InvalidOid; + joinrel->userid = InvalidOid; + joinrel->useridiscurrent = false; + joinrel->fdwroutine = NULL; + joinrel->fdw_private = NULL; + joinrel->baserestrictinfo = NIL; + joinrel->baserestrictcost.startup = 0; + joinrel->baserestrictcost.per_tuple = 0; + joinrel->joininfo = NIL; + joinrel->has_eclass_joins = false; + joinrel->consider_partitionwise_join = false; /* might get changed later */ + joinrel->top_parent_relids = NULL; + joinrel->part_scheme = NULL; + joinrel->nparts = -1; + joinrel->boundinfo = NULL; + joinrel->partbounds_merged = false; + joinrel->partition_qual = NIL; + joinrel->part_rels = NULL; + joinrel->live_parts = NULL; + joinrel->all_partrels = NULL; + joinrel->partexprs = NULL; + joinrel->nullable_partexprs = NULL; + + joinrel->top_parent_relids = bms_union(outer_rel->top_parent_relids, + inner_rel->top_parent_relids); + + /* Compute information relevant to foreign relations. */ + set_foreign_rel_properties(joinrel, outer_rel, inner_rel); + + /* Compute information needed for mapping Vars to the child rel */ + appinfos = find_appinfos_by_relids(root, joinrel->relids, &nappinfos); + + /* Set up reltarget struct */ + build_child_join_reltarget(root, parent_joinrel, joinrel, + nappinfos, appinfos); + + /* Construct joininfo list. */ + joinrel->joininfo = (List *) adjust_appendrel_attrs(root, + (Node *) parent_joinrel->joininfo, + nappinfos, + appinfos); + + /* + * Lateral relids referred in child join will be same as that referred in + * the parent relation. + */ + joinrel->direct_lateral_relids = (Relids) bms_copy(parent_joinrel->direct_lateral_relids); + joinrel->lateral_relids = (Relids) bms_copy(parent_joinrel->lateral_relids); + + /* + * If the parent joinrel has pending equivalence classes, so does the + * child. + */ + joinrel->has_eclass_joins = parent_joinrel->has_eclass_joins; + + /* Is the join between partitions itself partitioned? */ + build_joinrel_partition_info(joinrel, outer_rel, inner_rel, restrictlist, + jointype); + + /* Child joinrel is parallel safe if parent is parallel safe. */ + joinrel->consider_parallel = parent_joinrel->consider_parallel; + + /* Set estimates of the child-joinrel's size. */ + set_joinrel_size_estimates(root, joinrel, outer_rel, inner_rel, + sjinfo, restrictlist); + + /* We build the join only once. */ + Assert(!find_join_rel(root, joinrel->relids)); + + /* Add the relation to the PlannerInfo. */ + add_join_rel(root, joinrel); + + /* + * We might need EquivalenceClass members corresponding to the child join, + * so that we can represent sort pathkeys for it. As with children of + * baserels, we shouldn't need this unless there are relevant eclass joins + * (implying that a merge join might be possible) or pathkeys to sort by. + */ + if (joinrel->has_eclass_joins || has_useful_pathkeys(root, parent_joinrel)) + add_child_join_rel_equivalences(root, + nappinfos, appinfos, + parent_joinrel, joinrel); + + pfree(appinfos); + + return joinrel; +} + +/* + * min_join_parameterization + * + * Determine the minimum possible parameterization of a joinrel, that is, the + * set of other rels it contains LATERAL references to. We save this value in + * the join's RelOptInfo. This function is split out of build_join_rel() + * because join_is_legal() needs the value to check a prospective join. + */ +Relids +min_join_parameterization(PlannerInfo *root, + Relids joinrelids, + RelOptInfo *outer_rel, + RelOptInfo *inner_rel) +{ + Relids result; + + /* + * Basically we just need the union of the inputs' lateral_relids, less + * whatever is already in the join. + * + * It's not immediately obvious that this is a valid way to compute the + * result, because it might seem that we're ignoring possible lateral refs + * of PlaceHolderVars that are due to be computed at the join but not in + * either input. However, because create_lateral_join_info() already + * charged all such PHV refs to each member baserel of the join, they'll + * be accounted for already in the inputs' lateral_relids. Likewise, we + * do not need to worry about doing transitive closure here, because that + * was already accounted for in the original baserel lateral_relids. + */ + result = bms_union(outer_rel->lateral_relids, inner_rel->lateral_relids); + result = bms_del_members(result, joinrelids); + + /* Maintain invariant that result is exactly NULL if empty */ + if (bms_is_empty(result)) + result = NULL; + + return result; +} + +/* + * build_joinrel_tlist + * Builds a join relation's target list from an input relation. + * (This is invoked twice to handle the two input relations.) + * + * The join's targetlist includes all Vars of its member relations that + * will still be needed above the join. This subroutine adds all such + * Vars from the specified input rel's tlist to the join rel's tlist. + * + * We also compute the expected width of the join's output, making use + * of data that was cached at the baserel level by set_rel_width(). + */ +static void +build_joinrel_tlist(PlannerInfo *root, RelOptInfo *joinrel, + RelOptInfo *input_rel) +{ + Relids relids = joinrel->relids; + ListCell *vars; + + foreach(vars, input_rel->reltarget->exprs) + { + Var *var = (Var *) lfirst(vars); + + /* + * Ignore PlaceHolderVars in the input tlists; we'll make our own + * decisions about whether to copy them. + */ + if (IsA(var, PlaceHolderVar)) + continue; + + /* + * Otherwise, anything in a baserel or joinrel targetlist ought to be + * a Var. (More general cases can only appear in appendrel child + * rels, which will never be seen here.) + */ + if (!IsA(var, Var)) + elog(ERROR, "unexpected node type in rel targetlist: %d", + (int) nodeTag(var)); + + if (var->varno == ROWID_VAR) + { + /* UPDATE/DELETE/MERGE row identity vars are always needed */ + RowIdentityVarInfo *ridinfo = (RowIdentityVarInfo *) + list_nth(root->row_identity_vars, var->varattno - 1); + + joinrel->reltarget->exprs = lappend(joinrel->reltarget->exprs, + var); + /* Vars have cost zero, so no need to adjust reltarget->cost */ + joinrel->reltarget->width += ridinfo->rowidwidth; + } + else + { + RelOptInfo *baserel; + int ndx; + + /* Get the Var's original base rel */ + baserel = find_base_rel(root, var->varno); + + /* Is it still needed above this joinrel? */ + ndx = var->varattno - baserel->min_attr; + if (bms_nonempty_difference(baserel->attr_needed[ndx], relids)) + { + /* Yup, add it to the output */ + joinrel->reltarget->exprs = lappend(joinrel->reltarget->exprs, + var); + /* Vars have cost zero, so no need to adjust reltarget->cost */ + joinrel->reltarget->width += baserel->attr_widths[ndx]; + } + } + } +} + +/* + * build_joinrel_restrictlist + * build_joinrel_joinlist + * These routines build lists of restriction and join clauses for a + * join relation from the joininfo lists of the relations it joins. + * + * These routines are separate because the restriction list must be + * built afresh for each pair of input sub-relations we consider, whereas + * the join list need only be computed once for any join RelOptInfo. + * The join list is fully determined by the set of rels making up the + * joinrel, so we should get the same results (up to ordering) from any + * candidate pair of sub-relations. But the restriction list is whatever + * is not handled in the sub-relations, so it depends on which + * sub-relations are considered. + * + * If a join clause from an input relation refers to base rels still not + * present in the joinrel, then it is still a join clause for the joinrel; + * we put it into the joininfo list for the joinrel. Otherwise, + * the clause is now a restrict clause for the joined relation, and we + * return it to the caller of build_joinrel_restrictlist() to be stored in + * join paths made from this pair of sub-relations. (It will not need to + * be considered further up the join tree.) + * + * In many cases we will find the same RestrictInfos in both input + * relations' joinlists, so be careful to eliminate duplicates. + * Pointer equality should be a sufficient test for dups, since all + * the various joinlist entries ultimately refer to RestrictInfos + * pushed into them by distribute_restrictinfo_to_rels(). + * + * 'joinrel' is a join relation node + * 'outer_rel' and 'inner_rel' are a pair of relations that can be joined + * to form joinrel. + * + * build_joinrel_restrictlist() returns a list of relevant restrictinfos, + * whereas build_joinrel_joinlist() stores its results in the joinrel's + * joininfo list. One or the other must accept each given clause! + * + * NB: Formerly, we made deep(!) copies of each input RestrictInfo to pass + * up to the join relation. I believe this is no longer necessary, because + * RestrictInfo nodes are no longer context-dependent. Instead, just include + * the original nodes in the lists made for the join relation. + */ +static List * +build_joinrel_restrictlist(PlannerInfo *root, + RelOptInfo *joinrel, + RelOptInfo *outer_rel, + RelOptInfo *inner_rel) +{ + List *result; + + /* + * Collect all the clauses that syntactically belong at this level, + * eliminating any duplicates (important since we will see many of the + * same clauses arriving from both input relations). + */ + result = subbuild_joinrel_restrictlist(joinrel, outer_rel->joininfo, NIL); + result = subbuild_joinrel_restrictlist(joinrel, inner_rel->joininfo, result); + + /* + * Add on any clauses derived from EquivalenceClasses. These cannot be + * redundant with the clauses in the joininfo lists, so don't bother + * checking. + */ + result = list_concat(result, + generate_join_implied_equalities(root, + joinrel->relids, + outer_rel->relids, + inner_rel)); + + return result; +} + +static void +build_joinrel_joinlist(RelOptInfo *joinrel, + RelOptInfo *outer_rel, + RelOptInfo *inner_rel) +{ + List *result; + + /* + * Collect all the clauses that syntactically belong above this level, + * eliminating any duplicates (important since we will see many of the + * same clauses arriving from both input relations). + */ + result = subbuild_joinrel_joinlist(joinrel, outer_rel->joininfo, NIL); + result = subbuild_joinrel_joinlist(joinrel, inner_rel->joininfo, result); + + joinrel->joininfo = result; +} + +static List * +subbuild_joinrel_restrictlist(RelOptInfo *joinrel, + List *joininfo_list, + List *new_restrictlist) +{ + ListCell *l; + + foreach(l, joininfo_list) + { + RestrictInfo *rinfo = (RestrictInfo *) lfirst(l); + + if (bms_is_subset(rinfo->required_relids, joinrel->relids)) + { + /* + * This clause becomes a restriction clause for the joinrel, since + * it refers to no outside rels. Add it to the list, being + * careful to eliminate duplicates. (Since RestrictInfo nodes in + * different joinlists will have been multiply-linked rather than + * copied, pointer equality should be a sufficient test.) + */ + new_restrictlist = list_append_unique_ptr(new_restrictlist, rinfo); + } + else + { + /* + * This clause is still a join clause at this level, so we ignore + * it in this routine. + */ + } + } + + return new_restrictlist; +} + +static List * +subbuild_joinrel_joinlist(RelOptInfo *joinrel, + List *joininfo_list, + List *new_joininfo) +{ + ListCell *l; + + /* Expected to be called only for join between parent relations. */ + Assert(joinrel->reloptkind == RELOPT_JOINREL); + + foreach(l, joininfo_list) + { + RestrictInfo *rinfo = (RestrictInfo *) lfirst(l); + + if (bms_is_subset(rinfo->required_relids, joinrel->relids)) + { + /* + * This clause becomes a restriction clause for the joinrel, since + * it refers to no outside rels. So we can ignore it in this + * routine. + */ + } + else + { + /* + * This clause is still a join clause at this level, so add it to + * the new joininfo list, being careful to eliminate duplicates. + * (Since RestrictInfo nodes in different joinlists will have been + * multiply-linked rather than copied, pointer equality should be + * a sufficient test.) + */ + new_joininfo = list_append_unique_ptr(new_joininfo, rinfo); + } + } + + return new_joininfo; +} + + +/* + * fetch_upper_rel + * Build a RelOptInfo describing some post-scan/join query processing, + * or return a pre-existing one if somebody already built it. + * + * An "upper" relation is identified by an UpperRelationKind and a Relids set. + * The meaning of the Relids set is not specified here, and very likely will + * vary for different relation kinds. + * + * Most of the fields in an upper-level RelOptInfo are not used and are not + * set here (though makeNode should ensure they're zeroes). We basically only + * care about fields that are of interest to add_path() and set_cheapest(). + */ +RelOptInfo * +fetch_upper_rel(PlannerInfo *root, UpperRelationKind kind, Relids relids) +{ + RelOptInfo *upperrel; + ListCell *lc; + + /* + * For the moment, our indexing data structure is just a List for each + * relation kind. If we ever get so many of one kind that this stops + * working well, we can improve it. No code outside this function should + * assume anything about how to find a particular upperrel. + */ + + /* If we already made this upperrel for the query, return it */ + foreach(lc, root->upper_rels[kind]) + { + upperrel = (RelOptInfo *) lfirst(lc); + + if (bms_equal(upperrel->relids, relids)) + return upperrel; + } + + upperrel = makeNode(RelOptInfo); + upperrel->reloptkind = RELOPT_UPPER_REL; + upperrel->relids = bms_copy(relids); + + /* cheap startup cost is interesting iff not all tuples to be retrieved */ + upperrel->consider_startup = (root->tuple_fraction > 0); + upperrel->consider_param_startup = false; + upperrel->consider_parallel = false; /* might get changed later */ + upperrel->reltarget = create_empty_pathtarget(); + upperrel->pathlist = NIL; + upperrel->cheapest_startup_path = NULL; + upperrel->cheapest_total_path = NULL; + upperrel->cheapest_unique_path = NULL; + upperrel->cheapest_parameterized_paths = NIL; + + root->upper_rels[kind] = lappend(root->upper_rels[kind], upperrel); + + return upperrel; +} + + +/* + * find_childrel_parents + * Compute the set of parent relids of an appendrel child rel. + * + * Since appendrels can be nested, a child could have multiple levels of + * appendrel ancestors. This function computes a Relids set of all the + * parent relation IDs. + */ +Relids +find_childrel_parents(PlannerInfo *root, RelOptInfo *rel) +{ + Relids result = NULL; + + Assert(rel->reloptkind == RELOPT_OTHER_MEMBER_REL); + Assert(rel->relid > 0 && rel->relid < root->simple_rel_array_size); + + do + { + AppendRelInfo *appinfo = root->append_rel_array[rel->relid]; + Index prelid = appinfo->parent_relid; + + result = bms_add_member(result, prelid); + + /* traverse up to the parent rel, loop if it's also a child rel */ + rel = find_base_rel(root, prelid); + } while (rel->reloptkind == RELOPT_OTHER_MEMBER_REL); + + Assert(rel->reloptkind == RELOPT_BASEREL); + + return result; +} + + +/* + * get_baserel_parampathinfo + * Get the ParamPathInfo for a parameterized path for a base relation, + * constructing one if we don't have one already. + * + * This centralizes estimating the rowcounts for parameterized paths. + * We need to cache those to be sure we use the same rowcount for all paths + * of the same parameterization for a given rel. This is also a convenient + * place to determine which movable join clauses the parameterized path will + * be responsible for evaluating. + */ +ParamPathInfo * +get_baserel_parampathinfo(PlannerInfo *root, RelOptInfo *baserel, + Relids required_outer) +{ + ParamPathInfo *ppi; + Relids joinrelids; + List *pclauses; + double rows; + ListCell *lc; + + /* If rel has LATERAL refs, every path for it should account for them */ + Assert(bms_is_subset(baserel->lateral_relids, required_outer)); + + /* Unparameterized paths have no ParamPathInfo */ + if (bms_is_empty(required_outer)) + return NULL; + + Assert(!bms_overlap(baserel->relids, required_outer)); + + /* If we already have a PPI for this parameterization, just return it */ + if ((ppi = find_param_path_info(baserel, required_outer))) + return ppi; + + /* + * Identify all joinclauses that are movable to this base rel given this + * parameterization. + */ + joinrelids = bms_union(baserel->relids, required_outer); + pclauses = NIL; + foreach(lc, baserel->joininfo) + { + RestrictInfo *rinfo = (RestrictInfo *) lfirst(lc); + + if (join_clause_is_movable_into(rinfo, + baserel->relids, + joinrelids)) + pclauses = lappend(pclauses, rinfo); + } + + /* + * Add in joinclauses generated by EquivalenceClasses, too. (These + * necessarily satisfy join_clause_is_movable_into.) + */ + pclauses = list_concat(pclauses, + generate_join_implied_equalities(root, + joinrelids, + required_outer, + baserel)); + + /* Estimate the number of rows returned by the parameterized scan */ + rows = get_parameterized_baserel_size(root, baserel, pclauses); + + /* And now we can build the ParamPathInfo */ + ppi = makeNode(ParamPathInfo); + ppi->ppi_req_outer = required_outer; + ppi->ppi_rows = rows; + ppi->ppi_clauses = pclauses; + baserel->ppilist = lappend(baserel->ppilist, ppi); + + return ppi; +} + +/* + * get_joinrel_parampathinfo + * Get the ParamPathInfo for a parameterized path for a join relation, + * constructing one if we don't have one already. + * + * This centralizes estimating the rowcounts for parameterized paths. + * We need to cache those to be sure we use the same rowcount for all paths + * of the same parameterization for a given rel. This is also a convenient + * place to determine which movable join clauses the parameterized path will + * be responsible for evaluating. + * + * outer_path and inner_path are a pair of input paths that can be used to + * construct the join, and restrict_clauses is the list of regular join + * clauses (including clauses derived from EquivalenceClasses) that must be + * applied at the join node when using these inputs. + * + * Unlike the situation for base rels, the set of movable join clauses to be + * enforced at a join varies with the selected pair of input paths, so we + * must calculate that and pass it back, even if we already have a matching + * ParamPathInfo. We handle this by adding any clauses moved down to this + * join to *restrict_clauses, which is an in/out parameter. (The addition + * is done in such a way as to not modify the passed-in List structure.) + * + * Note: when considering a nestloop join, the caller must have removed from + * restrict_clauses any movable clauses that are themselves scheduled to be + * pushed into the right-hand path. We do not do that here since it's + * unnecessary for other join types. + */ +ParamPathInfo * +get_joinrel_parampathinfo(PlannerInfo *root, RelOptInfo *joinrel, + Path *outer_path, + Path *inner_path, + SpecialJoinInfo *sjinfo, + Relids required_outer, + List **restrict_clauses) +{ + ParamPathInfo *ppi; + Relids join_and_req; + Relids outer_and_req; + Relids inner_and_req; + List *pclauses; + List *eclauses; + List *dropped_ecs; + double rows; + ListCell *lc; + + /* If rel has LATERAL refs, every path for it should account for them */ + Assert(bms_is_subset(joinrel->lateral_relids, required_outer)); + + /* Unparameterized paths have no ParamPathInfo or extra join clauses */ + if (bms_is_empty(required_outer)) + return NULL; + + Assert(!bms_overlap(joinrel->relids, required_outer)); + + /* + * Identify all joinclauses that are movable to this join rel given this + * parameterization. These are the clauses that are movable into this + * join, but not movable into either input path. Treat an unparameterized + * input path as not accepting parameterized clauses (because it won't, + * per the shortcut exit above), even though the joinclause movement rules + * might allow the same clauses to be moved into a parameterized path for + * that rel. + */ + join_and_req = bms_union(joinrel->relids, required_outer); + if (outer_path->param_info) + outer_and_req = bms_union(outer_path->parent->relids, + PATH_REQ_OUTER(outer_path)); + else + outer_and_req = NULL; /* outer path does not accept parameters */ + if (inner_path->param_info) + inner_and_req = bms_union(inner_path->parent->relids, + PATH_REQ_OUTER(inner_path)); + else + inner_and_req = NULL; /* inner path does not accept parameters */ + + pclauses = NIL; + foreach(lc, joinrel->joininfo) + { + RestrictInfo *rinfo = (RestrictInfo *) lfirst(lc); + + if (join_clause_is_movable_into(rinfo, + joinrel->relids, + join_and_req) && + !join_clause_is_movable_into(rinfo, + outer_path->parent->relids, + outer_and_req) && + !join_clause_is_movable_into(rinfo, + inner_path->parent->relids, + inner_and_req)) + pclauses = lappend(pclauses, rinfo); + } + + /* Consider joinclauses generated by EquivalenceClasses, too */ + eclauses = generate_join_implied_equalities(root, + join_and_req, + required_outer, + joinrel); + /* We only want ones that aren't movable to lower levels */ + dropped_ecs = NIL; + foreach(lc, eclauses) + { + RestrictInfo *rinfo = (RestrictInfo *) lfirst(lc); + + /* + * In principle, join_clause_is_movable_into() should accept anything + * returned by generate_join_implied_equalities(); but because its + * analysis is only approximate, sometimes it doesn't. So we + * currently cannot use this Assert; instead just assume it's okay to + * apply the joinclause at this level. + */ +#ifdef NOT_USED + Assert(join_clause_is_movable_into(rinfo, + joinrel->relids, + join_and_req)); +#endif + if (join_clause_is_movable_into(rinfo, + outer_path->parent->relids, + outer_and_req)) + continue; /* drop if movable into LHS */ + if (join_clause_is_movable_into(rinfo, + inner_path->parent->relids, + inner_and_req)) + { + /* drop if movable into RHS, but remember EC for use below */ + Assert(rinfo->left_ec == rinfo->right_ec); + dropped_ecs = lappend(dropped_ecs, rinfo->left_ec); + continue; + } + pclauses = lappend(pclauses, rinfo); + } + + /* + * EquivalenceClasses are harder to deal with than we could wish, because + * of the fact that a given EC can generate different clauses depending on + * context. Suppose we have an EC {X.X, Y.Y, Z.Z} where X and Y are the + * LHS and RHS of the current join and Z is in required_outer, and further + * suppose that the inner_path is parameterized by both X and Z. The code + * above will have produced either Z.Z = X.X or Z.Z = Y.Y from that EC, + * and in the latter case will have discarded it as being movable into the + * RHS. However, the EC machinery might have produced either Y.Y = X.X or + * Y.Y = Z.Z as the EC enforcement clause within the inner_path; it will + * not have produced both, and we can't readily tell from here which one + * it did pick. If we add no clause to this join, we'll end up with + * insufficient enforcement of the EC; either Z.Z or X.X will fail to be + * constrained to be equal to the other members of the EC. (When we come + * to join Z to this X/Y path, we will certainly drop whichever EC clause + * is generated at that join, so this omission won't get fixed later.) + * + * To handle this, for each EC we discarded such a clause from, try to + * generate a clause connecting the required_outer rels to the join's LHS + * ("Z.Z = X.X" in the terms of the above example). If successful, and if + * the clause can't be moved to the LHS, add it to the current join's + * restriction clauses. (If an EC cannot generate such a clause then it + * has nothing that needs to be enforced here, while if the clause can be + * moved into the LHS then it should have been enforced within that path.) + * + * Note that we don't need similar processing for ECs whose clause was + * considered to be movable into the LHS, because the LHS can't refer to + * the RHS so there is no comparable ambiguity about what it might + * actually be enforcing internally. + */ + if (dropped_ecs) + { + Relids real_outer_and_req; + + real_outer_and_req = bms_union(outer_path->parent->relids, + required_outer); + eclauses = + generate_join_implied_equalities_for_ecs(root, + dropped_ecs, + real_outer_and_req, + required_outer, + outer_path->parent); + foreach(lc, eclauses) + { + RestrictInfo *rinfo = (RestrictInfo *) lfirst(lc); + + /* As above, can't quite assert this here */ +#ifdef NOT_USED + Assert(join_clause_is_movable_into(rinfo, + outer_path->parent->relids, + real_outer_and_req)); +#endif + if (!join_clause_is_movable_into(rinfo, + outer_path->parent->relids, + outer_and_req)) + pclauses = lappend(pclauses, rinfo); + } + } + + /* + * Now, attach the identified moved-down clauses to the caller's + * restrict_clauses list. By using list_concat in this order, we leave + * the original list structure of restrict_clauses undamaged. + */ + *restrict_clauses = list_concat(pclauses, *restrict_clauses); + + /* If we already have a PPI for this parameterization, just return it */ + if ((ppi = find_param_path_info(joinrel, required_outer))) + return ppi; + + /* Estimate the number of rows returned by the parameterized join */ + rows = get_parameterized_joinrel_size(root, joinrel, + outer_path, + inner_path, + sjinfo, + *restrict_clauses); + + /* + * And now we can build the ParamPathInfo. No point in saving the + * input-pair-dependent clause list, though. + * + * Note: in GEQO mode, we'll be called in a temporary memory context, but + * the joinrel structure is there too, so no problem. + */ + ppi = makeNode(ParamPathInfo); + ppi->ppi_req_outer = required_outer; + ppi->ppi_rows = rows; + ppi->ppi_clauses = NIL; + joinrel->ppilist = lappend(joinrel->ppilist, ppi); + + return ppi; +} + +/* + * get_appendrel_parampathinfo + * Get the ParamPathInfo for a parameterized path for an append relation. + * + * For an append relation, the rowcount estimate will just be the sum of + * the estimates for its children. However, we still need a ParamPathInfo + * to flag the fact that the path requires parameters. So this just creates + * a suitable struct with zero ppi_rows (and no ppi_clauses either, since + * the Append node isn't responsible for checking quals). + */ +ParamPathInfo * +get_appendrel_parampathinfo(RelOptInfo *appendrel, Relids required_outer) +{ + ParamPathInfo *ppi; + + /* If rel has LATERAL refs, every path for it should account for them */ + Assert(bms_is_subset(appendrel->lateral_relids, required_outer)); + + /* Unparameterized paths have no ParamPathInfo */ + if (bms_is_empty(required_outer)) + return NULL; + + Assert(!bms_overlap(appendrel->relids, required_outer)); + + /* If we already have a PPI for this parameterization, just return it */ + if ((ppi = find_param_path_info(appendrel, required_outer))) + return ppi; + + /* Else build the ParamPathInfo */ + ppi = makeNode(ParamPathInfo); + ppi->ppi_req_outer = required_outer; + ppi->ppi_rows = 0; + ppi->ppi_clauses = NIL; + appendrel->ppilist = lappend(appendrel->ppilist, ppi); + + return ppi; +} + +/* + * Returns a ParamPathInfo for the parameterization given by required_outer, if + * already available in the given rel. Returns NULL otherwise. + */ +ParamPathInfo * +find_param_path_info(RelOptInfo *rel, Relids required_outer) +{ + ListCell *lc; + + foreach(lc, rel->ppilist) + { + ParamPathInfo *ppi = (ParamPathInfo *) lfirst(lc); + + if (bms_equal(ppi->ppi_req_outer, required_outer)) + return ppi; + } + + return NULL; +} + +/* + * build_joinrel_partition_info + * Checks if the two relations being joined can use partitionwise join + * and if yes, initialize partitioning information of the resulting + * partitioned join relation. + */ +static void +build_joinrel_partition_info(RelOptInfo *joinrel, RelOptInfo *outer_rel, + RelOptInfo *inner_rel, List *restrictlist, + JoinType jointype) +{ + PartitionScheme part_scheme; + + /* Nothing to do if partitionwise join technique is disabled. */ + if (!enable_partitionwise_join) + { + Assert(!IS_PARTITIONED_REL(joinrel)); + return; + } + + /* + * We can only consider this join as an input to further partitionwise + * joins if (a) the input relations are partitioned and have + * consider_partitionwise_join=true, (b) the partition schemes match, and + * (c) we can identify an equi-join between the partition keys. Note that + * if it were possible for have_partkey_equi_join to return different + * answers for the same joinrel depending on which join ordering we try + * first, this logic would break. That shouldn't happen, though, because + * of the way the query planner deduces implied equalities and reorders + * the joins. Please see optimizer/README for details. + */ + if (outer_rel->part_scheme == NULL || inner_rel->part_scheme == NULL || + !outer_rel->consider_partitionwise_join || + !inner_rel->consider_partitionwise_join || + outer_rel->part_scheme != inner_rel->part_scheme || + !have_partkey_equi_join(joinrel, outer_rel, inner_rel, + jointype, restrictlist)) + { + Assert(!IS_PARTITIONED_REL(joinrel)); + return; + } + + part_scheme = outer_rel->part_scheme; + + /* + * This function will be called only once for each joinrel, hence it + * should not have partitioning fields filled yet. + */ + Assert(!joinrel->part_scheme && !joinrel->partexprs && + !joinrel->nullable_partexprs && !joinrel->part_rels && + !joinrel->boundinfo); + + /* + * If the join relation is partitioned, it uses the same partitioning + * scheme as the joining relations. + * + * Note: we calculate the partition bounds, number of partitions, and + * child-join relations of the join relation in try_partitionwise_join(). + */ + joinrel->part_scheme = part_scheme; + set_joinrel_partition_key_exprs(joinrel, outer_rel, inner_rel, jointype); + + /* + * Set the consider_partitionwise_join flag. + */ + Assert(outer_rel->consider_partitionwise_join); + Assert(inner_rel->consider_partitionwise_join); + joinrel->consider_partitionwise_join = true; +} + +/* + * have_partkey_equi_join + * + * Returns true if there exist equi-join conditions involving pairs + * of matching partition keys of the relations being joined for all + * partition keys. + */ +static bool +have_partkey_equi_join(RelOptInfo *joinrel, + RelOptInfo *rel1, RelOptInfo *rel2, + JoinType jointype, List *restrictlist) +{ + PartitionScheme part_scheme = rel1->part_scheme; + ListCell *lc; + int cnt_pks; + bool pk_has_clause[PARTITION_MAX_KEYS]; + bool strict_op; + + /* + * This function must only be called when the joined relations have same + * partitioning scheme. + */ + Assert(rel1->part_scheme == rel2->part_scheme); + Assert(part_scheme); + + memset(pk_has_clause, 0, sizeof(pk_has_clause)); + foreach(lc, restrictlist) + { + RestrictInfo *rinfo = lfirst_node(RestrictInfo, lc); + OpExpr *opexpr; + Expr *expr1; + Expr *expr2; + int ipk1; + int ipk2; + + /* If processing an outer join, only use its own join clauses. */ + if (IS_OUTER_JOIN(jointype) && + RINFO_IS_PUSHED_DOWN(rinfo, joinrel->relids)) + continue; + + /* Skip clauses which can not be used for a join. */ + if (!rinfo->can_join) + continue; + + /* Skip clauses which are not equality conditions. */ + if (!rinfo->mergeopfamilies && !OidIsValid(rinfo->hashjoinoperator)) + continue; + + /* Should be OK to assume it's an OpExpr. */ + opexpr = castNode(OpExpr, rinfo->clause); + + /* Match the operands to the relation. */ + if (bms_is_subset(rinfo->left_relids, rel1->relids) && + bms_is_subset(rinfo->right_relids, rel2->relids)) + { + expr1 = linitial(opexpr->args); + expr2 = lsecond(opexpr->args); + } + else if (bms_is_subset(rinfo->left_relids, rel2->relids) && + bms_is_subset(rinfo->right_relids, rel1->relids)) + { + expr1 = lsecond(opexpr->args); + expr2 = linitial(opexpr->args); + } + else + continue; + + /* + * Now we need to know whether the join operator is strict; see + * comments in pathnodes.h. + */ + strict_op = op_strict(opexpr->opno); + + /* + * Only clauses referencing the partition keys are useful for + * partitionwise join. + */ + ipk1 = match_expr_to_partition_keys(expr1, rel1, strict_op); + if (ipk1 < 0) + continue; + ipk2 = match_expr_to_partition_keys(expr2, rel2, strict_op); + if (ipk2 < 0) + continue; + + /* + * If the clause refers to keys at different ordinal positions, it can + * not be used for partitionwise join. + */ + if (ipk1 != ipk2) + continue; + + /* + * The clause allows partitionwise join only if it uses the same + * operator family as that specified by the partition key. + */ + if (rel1->part_scheme->strategy == PARTITION_STRATEGY_HASH) + { + if (!OidIsValid(rinfo->hashjoinoperator) || + !op_in_opfamily(rinfo->hashjoinoperator, + part_scheme->partopfamily[ipk1])) + continue; + } + else if (!list_member_oid(rinfo->mergeopfamilies, + part_scheme->partopfamily[ipk1])) + continue; + + /* Mark the partition key as having an equi-join clause. */ + pk_has_clause[ipk1] = true; + } + + /* Check whether every partition key has an equi-join condition. */ + for (cnt_pks = 0; cnt_pks < part_scheme->partnatts; cnt_pks++) + { + if (!pk_has_clause[cnt_pks]) + return false; + } + + return true; +} + +/* + * match_expr_to_partition_keys + * + * Tries to match an expression to one of the nullable or non-nullable + * partition keys of "rel". Returns the matched key's ordinal position, + * or -1 if the expression could not be matched to any of the keys. + * + * strict_op must be true if the expression will be compared with the + * partition key using a strict operator. This allows us to consider + * nullable as well as nonnullable partition keys. + */ +static int +match_expr_to_partition_keys(Expr *expr, RelOptInfo *rel, bool strict_op) +{ + int cnt; + + /* This function should be called only for partitioned relations. */ + Assert(rel->part_scheme); + Assert(rel->partexprs); + Assert(rel->nullable_partexprs); + + /* Remove any relabel decorations. */ + while (IsA(expr, RelabelType)) + expr = (Expr *) (castNode(RelabelType, expr))->arg; + + for (cnt = 0; cnt < rel->part_scheme->partnatts; cnt++) + { + ListCell *lc; + + /* We can always match to the non-nullable partition keys. */ + foreach(lc, rel->partexprs[cnt]) + { + if (equal(lfirst(lc), expr)) + return cnt; + } + + if (!strict_op) + continue; + + /* + * If it's a strict join operator then a NULL partition key on one + * side will not join to any partition key on the other side, and in + * particular such a row can't join to a row from a different + * partition on the other side. So, it's okay to search the nullable + * partition keys as well. + */ + foreach(lc, rel->nullable_partexprs[cnt]) + { + if (equal(lfirst(lc), expr)) + return cnt; + } + } + + return -1; +} + +/* + * set_joinrel_partition_key_exprs + * Initialize partition key expressions for a partitioned joinrel. + */ +static void +set_joinrel_partition_key_exprs(RelOptInfo *joinrel, + RelOptInfo *outer_rel, RelOptInfo *inner_rel, + JoinType jointype) +{ + PartitionScheme part_scheme = joinrel->part_scheme; + int partnatts = part_scheme->partnatts; + + joinrel->partexprs = (List **) palloc0(sizeof(List *) * partnatts); + joinrel->nullable_partexprs = + (List **) palloc0(sizeof(List *) * partnatts); + + /* + * The joinrel's partition expressions are the same as those of the input + * rels, but we must properly classify them as nullable or not in the + * joinrel's output. (Also, we add some more partition expressions if + * it's a FULL JOIN.) + */ + for (int cnt = 0; cnt < partnatts; cnt++) + { + /* mark these const to enforce that we copy them properly */ + const List *outer_expr = outer_rel->partexprs[cnt]; + const List *outer_null_expr = outer_rel->nullable_partexprs[cnt]; + const List *inner_expr = inner_rel->partexprs[cnt]; + const List *inner_null_expr = inner_rel->nullable_partexprs[cnt]; + List *partexpr = NIL; + List *nullable_partexpr = NIL; + ListCell *lc; + + switch (jointype) + { + /* + * A join relation resulting from an INNER join may be + * regarded as partitioned by either of the inner and outer + * relation keys. For example, A INNER JOIN B ON A.a = B.b + * can be regarded as partitioned on either A.a or B.b. So we + * add both keys to the joinrel's partexpr lists. However, + * anything that was already nullable still has to be treated + * as nullable. + */ + case JOIN_INNER: + partexpr = list_concat_copy(outer_expr, inner_expr); + nullable_partexpr = list_concat_copy(outer_null_expr, + inner_null_expr); + break; + + /* + * A join relation resulting from a SEMI or ANTI join may be + * regarded as partitioned by the outer relation keys. The + * inner relation's keys are no longer interesting; since they + * aren't visible in the join output, nothing could join to + * them. + */ + case JOIN_SEMI: + case JOIN_ANTI: + partexpr = list_copy(outer_expr); + nullable_partexpr = list_copy(outer_null_expr); + break; + + /* + * A join relation resulting from a LEFT OUTER JOIN likewise + * may be regarded as partitioned on the (non-nullable) outer + * relation keys. The inner (nullable) relation keys are okay + * as partition keys for further joins as long as they involve + * strict join operators. + */ + case JOIN_LEFT: + partexpr = list_copy(outer_expr); + nullable_partexpr = list_concat_copy(inner_expr, + outer_null_expr); + nullable_partexpr = list_concat(nullable_partexpr, + inner_null_expr); + break; + + /* + * For FULL OUTER JOINs, both relations are nullable, so the + * resulting join relation may be regarded as partitioned on + * either of inner and outer relation keys, but only for joins + * that involve strict join operators. + */ + case JOIN_FULL: + nullable_partexpr = list_concat_copy(outer_expr, + inner_expr); + nullable_partexpr = list_concat(nullable_partexpr, + outer_null_expr); + nullable_partexpr = list_concat(nullable_partexpr, + inner_null_expr); + + /* + * Also add CoalesceExprs corresponding to each possible + * full-join output variable (that is, left side coalesced to + * right side), so that we can match equijoin expressions + * using those variables. We really only need these for + * columns merged by JOIN USING, and only with the pairs of + * input items that correspond to the data structures that + * parse analysis would build for such variables. But it's + * hard to tell which those are, so just make all the pairs. + * Extra items in the nullable_partexprs list won't cause big + * problems. (It's possible that such items will get matched + * to user-written COALESCEs, but it should still be valid to + * partition on those, since they're going to be either the + * partition column or NULL; it's the same argument as for + * partitionwise nesting of any outer join.) We assume no + * type coercions are needed to make the coalesce expressions, + * since columns of different types won't have gotten + * classified as the same PartitionScheme. + */ + foreach(lc, list_concat_copy(outer_expr, outer_null_expr)) + { + Node *larg = (Node *) lfirst(lc); + ListCell *lc2; + + foreach(lc2, list_concat_copy(inner_expr, inner_null_expr)) + { + Node *rarg = (Node *) lfirst(lc2); + CoalesceExpr *c = makeNode(CoalesceExpr); + + c->coalescetype = exprType(larg); + c->coalescecollid = exprCollation(larg); + c->args = list_make2(larg, rarg); + c->location = -1; + nullable_partexpr = lappend(nullable_partexpr, c); + } + } + break; + + default: + elog(ERROR, "unrecognized join type: %d", (int) jointype); + } + + joinrel->partexprs[cnt] = partexpr; + joinrel->nullable_partexprs[cnt] = nullable_partexpr; + } +} + +/* + * build_child_join_reltarget + * Set up a child-join relation's reltarget from a parent-join relation. + */ +static void +build_child_join_reltarget(PlannerInfo *root, + RelOptInfo *parentrel, + RelOptInfo *childrel, + int nappinfos, + AppendRelInfo **appinfos) +{ + /* Build the targetlist */ + childrel->reltarget->exprs = (List *) + adjust_appendrel_attrs(root, + (Node *) parentrel->reltarget->exprs, + nappinfos, appinfos); + + /* Set the cost and width fields */ + childrel->reltarget->cost.startup = parentrel->reltarget->cost.startup; + childrel->reltarget->cost.per_tuple = parentrel->reltarget->cost.per_tuple; + childrel->reltarget->width = parentrel->reltarget->width; +} -- cgit v1.2.3