PostgreSQL Coding Conventions Formatting Source code formatting uses 4 column tab spacing, with tabs preserved (i.e., tabs are not expanded to spaces). Each logical indentation level is one additional tab stop. Layout rules (brace positioning, etc.) follow BSD conventions. In particular, curly braces for the controlled blocks of if, while, switch, etc. go on their own lines. Limit line lengths so that the code is readable in an 80-column window. (This doesn't mean that you must never go past 80 columns. For instance, breaking a long error message string in arbitrary places just to keep the code within 80 columns is probably not a net gain in readability.) To maintain a consistent coding style, do not use C++ style comments (// comments). pgindent will replace them with /* ... */. The preferred style for multi-line comment blocks is /* * comment text begins here * and continues here */ Note that comment blocks that begin in column 1 will be preserved as-is by pgindent, but it will re-flow indented comment blocks as though they were plain text. If you want to preserve the line breaks in an indented block, add dashes like this: /*---------- * comment text begins here * and continues here *---------- */ While submitted patches do not absolutely have to follow these formatting rules, it's a good idea to do so. Your code will get run through pgindent before the next release, so there's no point in making it look nice under some other set of formatting conventions. A good rule of thumb for patches is make the new code look like the existing code around it. The src/tools/editors directory contains sample settings files that can be used with the Emacs, xemacs or vim editors to help ensure that they format code according to these conventions. If you'd like to run pgindent locally to help make your code match project style, see the src/tools/pgindent directory. The text browsing tools more and less can be invoked as: more -x4 less -x4 to make them show tabs appropriately. Reporting Errors Within the Server ereport elog Error, warning, and log messages generated within the server code should be created using ereport, or its older cousin elog. The use of this function is complex enough to require some explanation. There are two required elements for every message: a severity level (ranging from DEBUG to PANIC) and a primary message text. In addition there are optional elements, the most common of which is an error identifier code that follows the SQL spec's SQLSTATE conventions. ereport itself is just a shell macro that exists mainly for the syntactic convenience of making message generation look like a single function call in the C source code. The only parameter accepted directly by ereport is the severity level. The primary message text and any optional message elements are generated by calling auxiliary functions, such as errmsg, within the ereport call. A typical call to ereport might look like this: ereport(ERROR, errcode(ERRCODE_DIVISION_BY_ZERO), errmsg("division by zero")); This specifies error severity level ERROR (a run-of-the-mill error). The errcode call specifies the SQLSTATE error code using a macro defined in src/include/utils/errcodes.h. The errmsg call provides the primary message text. You will also frequently see this older style, with an extra set of parentheses surrounding the auxiliary function calls: ereport(ERROR, (errcode(ERRCODE_DIVISION_BY_ZERO), errmsg("division by zero"))); The extra parentheses were required before PostgreSQL version 12, but are now optional. Here is a more complex example: ereport(ERROR, errcode(ERRCODE_AMBIGUOUS_FUNCTION), errmsg("function %s is not unique", func_signature_string(funcname, nargs, NIL, actual_arg_types)), errhint("Unable to choose a best candidate function. " "You might need to add explicit typecasts.")); This illustrates the use of format codes to embed run-time values into a message text. Also, an optional hint message is provided. The auxiliary function calls can be written in any order, but conventionally errcode and errmsg appear first. If the severity level is ERROR or higher, ereport aborts execution of the current query and does not return to the caller. If the severity level is lower than ERROR, ereport returns normally. The available auxiliary routines for ereport are: errcode(sqlerrcode) specifies the SQLSTATE error identifier code for the condition. If this routine is not called, the error identifier defaults to ERRCODE_INTERNAL_ERROR when the error severity level is ERROR or higher, ERRCODE_WARNING when the error level is WARNING, otherwise (for NOTICE and below) ERRCODE_SUCCESSFUL_COMPLETION. While these defaults are often convenient, always think whether they are appropriate before omitting the errcode() call. errmsg(const char *msg, ...) specifies the primary error message text, and possibly run-time values to insert into it. Insertions are specified by sprintf-style format codes. In addition to the standard format codes accepted by sprintf, the format code %m can be used to insert the error message returned by strerror for the current value of errno. That is, the value that was current when the ereport call was reached; changes of errno within the auxiliary reporting routines will not affect it. That would not be true if you were to write strerror(errno) explicitly in errmsg's parameter list; accordingly, do not do so. %m does not require any corresponding entry in the parameter list for errmsg. Note that the message string will be run through gettext for possible localization before format codes are processed. errmsg_internal(const char *msg, ...) is the same as errmsg, except that the message string will not be translated nor included in the internationalization message dictionary. This should be used for cannot happen cases that are probably not worth expending translation effort on. errmsg_plural(const char *fmt_singular, const char *fmt_plural, unsigned long n, ...) is like errmsg, but with support for various plural forms of the message. fmt_singular is the English singular format, fmt_plural is the English plural format, n is the integer value that determines which plural form is needed, and the remaining arguments are formatted according to the selected format string. For more information see . errdetail(const char *msg, ...) supplies an optional detail message; this is to be used when there is additional information that seems inappropriate to put in the primary message. The message string is processed in just the same way as for errmsg. errdetail_internal(const char *msg, ...) is the same as errdetail, except that the message string will not be translated nor included in the internationalization message dictionary. This should be used for detail messages that are not worth expending translation effort on, for instance because they are too technical to be useful to most users. errdetail_plural(const char *fmt_singular, const char *fmt_plural, unsigned long n, ...) is like errdetail, but with support for various plural forms of the message. For more information see . errdetail_log(const char *msg, ...) is the same as errdetail except that this string goes only to the server log, never to the client. If both errdetail (or one of its equivalents above) and errdetail_log are used then one string goes to the client and the other to the log. This is useful for error details that are too security-sensitive or too bulky to include in the report sent to the client. errdetail_log_plural(const char *fmt_singular, const char *fmt_plural, unsigned long n, ...) is like errdetail_log, but with support for various plural forms of the message. For more information see . errhint(const char *msg, ...) supplies an optional hint message; this is to be used when offering suggestions about how to fix the problem, as opposed to factual details about what went wrong. The message string is processed in just the same way as for errmsg. errhint_plural(const char *fmt_singular, const char *fmt_plural, unsigned long n, ...) is like errhint, but with support for various plural forms of the message. For more information see . errcontext(const char *msg, ...) is not normally called directly from an ereport message site; rather it is used in error_context_stack callback functions to provide information about the context in which an error occurred, such as the current location in a PL function. The message string is processed in just the same way as for errmsg. Unlike the other auxiliary functions, this can be called more than once per ereport call; the successive strings thus supplied are concatenated with separating newlines. errposition(int cursorpos) specifies the textual location of an error within a query string. Currently it is only useful for errors detected in the lexical and syntactic analysis phases of query processing. errtable(Relation rel) specifies a relation whose name and schema name should be included as auxiliary fields in the error report. errtablecol(Relation rel, int attnum) specifies a column whose name, table name, and schema name should be included as auxiliary fields in the error report. errtableconstraint(Relation rel, const char *conname) specifies a table constraint whose name, table name, and schema name should be included as auxiliary fields in the error report. Indexes should be considered to be constraints for this purpose, whether or not they have an associated pg_constraint entry. Be careful to pass the underlying heap relation, not the index itself, as rel. errdatatype(Oid datatypeOid) specifies a data type whose name and schema name should be included as auxiliary fields in the error report. errdomainconstraint(Oid datatypeOid, const char *conname) specifies a domain constraint whose name, domain name, and schema name should be included as auxiliary fields in the error report. errcode_for_file_access() is a convenience function that selects an appropriate SQLSTATE error identifier for a failure in a file-access-related system call. It uses the saved errno to determine which error code to generate. Usually this should be used in combination with %m in the primary error message text. errcode_for_socket_access() is a convenience function that selects an appropriate SQLSTATE error identifier for a failure in a socket-related system call. errhidestmt(bool hide_stmt) can be called to specify suppression of the STATEMENT: portion of a message in the postmaster log. Generally this is appropriate if the message text includes the current statement already. errhidecontext(bool hide_ctx) can be called to specify suppression of the CONTEXT: portion of a message in the postmaster log. This should only be used for verbose debugging messages where the repeated inclusion of context would bloat the log too much. At most one of the functions errtable, errtablecol, errtableconstraint, errdatatype, or errdomainconstraint should be used in an ereport call. These functions exist to allow applications to extract the name of a database object associated with the error condition without having to examine the potentially-localized error message text. These functions should be used in error reports for which it's likely that applications would wish to have automatic error handling. As of PostgreSQL 9.3, complete coverage exists only for errors in SQLSTATE class 23 (integrity constraint violation), but this is likely to be expanded in future. There is an older function elog that is still heavily used. An elog call: elog(level, "format string", ...); is exactly equivalent to: ereport(level, errmsg_internal("format string", ...)); Notice that the SQLSTATE error code is always defaulted, and the message string is not subject to translation. Therefore, elog should be used only for internal errors and low-level debug logging. Any message that is likely to be of interest to ordinary users should go through ereport. Nonetheless, there are enough internal cannot happen error checks in the system that elog is still widely used; it is preferred for those messages for its notational simplicity. Advice about writing good error messages can be found in . Error Message Style Guide This style guide is offered in the hope of maintaining a consistent, user-friendly style throughout all the messages generated by PostgreSQL. What Goes Where The primary message should be short, factual, and avoid reference to implementation details such as specific function names. Short means should fit on one line under normal conditions. Use a detail message if needed to keep the primary message short, or if you feel a need to mention implementation details such as the particular system call that failed. Both primary and detail messages should be factual. Use a hint message for suggestions about what to do to fix the problem, especially if the suggestion might not always be applicable. For example, instead of: IpcMemoryCreate: shmget(key=%d, size=%u, 0%o) failed: %m (plus a long addendum that is basically a hint) write: Primary: could not create shared memory segment: %m Detail: Failed syscall was shmget(key=%d, size=%u, 0%o). Hint: the addendum Rationale: keeping the primary message short helps keep it to the point, and lets clients lay out screen space on the assumption that one line is enough for error messages. Detail and hint messages can be relegated to a verbose mode, or perhaps a pop-up error-details window. Also, details and hints would normally be suppressed from the server log to save space. Reference to implementation details is best avoided since users aren't expected to know the details. Formatting Don't put any specific assumptions about formatting into the message texts. Expect clients and the server log to wrap lines to fit their own needs. In long messages, newline characters (\n) can be used to indicate suggested paragraph breaks. Don't end a message with a newline. Don't use tabs or other formatting characters. (In error context displays, newlines are automatically added to separate levels of context such as function calls.) Rationale: Messages are not necessarily displayed on terminal-type displays. In GUI displays or browsers these formatting instructions are at best ignored. Quotation Marks English text should use double quotes when quoting is appropriate. Text in other languages should consistently use one kind of quotes that is consistent with publishing customs and computer output of other programs. Rationale: The choice of double quotes over single quotes is somewhat arbitrary, but tends to be the preferred use. Some have suggested choosing the kind of quotes depending on the type of object according to SQL conventions (namely, strings single quoted, identifiers double quoted). But this is a language-internal technical issue that many users aren't even familiar with, it won't scale to other kinds of quoted terms, it doesn't translate to other languages, and it's pretty pointless, too. Use of Quotes Always use quotes to delimit file names, user-supplied identifiers, and other variables that might contain words. Do not use them to mark up variables that will not contain words (for example, operator names). There are functions in the backend that will double-quote their own output as needed (for example, format_type_be()). Do not put additional quotes around the output of such functions. Rationale: Objects can have names that create ambiguity when embedded in a message. Be consistent about denoting where a plugged-in name starts and ends. But don't clutter messages with unnecessary or duplicate quote marks. Grammar and Punctuation The rules are different for primary error messages and for detail/hint messages: Primary error messages: Do not capitalize the first letter. Do not end a message with a period. Do not even think about ending a message with an exclamation point. Detail and hint messages: Use complete sentences, and end each with a period. Capitalize the first word of sentences. Put two spaces after the period if another sentence follows (for English text; might be inappropriate in other languages). Error context strings: Do not capitalize the first letter and do not end the string with a period. Context strings should normally not be complete sentences. Rationale: Avoiding punctuation makes it easier for client applications to embed the message into a variety of grammatical contexts. Often, primary messages are not grammatically complete sentences anyway. (And if they're long enough to be more than one sentence, they should be split into primary and detail parts.) However, detail and hint messages are longer and might need to include multiple sentences. For consistency, they should follow complete-sentence style even when there's only one sentence. Upper Case vs. Lower Case Use lower case for message wording, including the first letter of a primary error message. Use upper case for SQL commands and key words if they appear in the message. Rationale: It's easier to make everything look more consistent this way, since some messages are complete sentences and some not. Avoid Passive Voice Use the active voice. Use complete sentences when there is an acting subject (A could not do B). Use telegram style without subject if the subject would be the program itself; do not use I for the program. Rationale: The program is not human. Don't pretend otherwise. Present vs. Past Tense Use past tense if an attempt to do something failed, but could perhaps succeed next time (perhaps after fixing some problem). Use present tense if the failure is certainly permanent. There is a nontrivial semantic difference between sentences of the form: could not open file "%s": %m and: cannot open file "%s" The first one means that the attempt to open the file failed. The message should give a reason, such as disk full or file doesn't exist. The past tense is appropriate because next time the disk might not be full anymore or the file in question might exist. The second form indicates that the functionality of opening the named file does not exist at all in the program, or that it's conceptually impossible. The present tense is appropriate because the condition will persist indefinitely. Rationale: Granted, the average user will not be able to draw great conclusions merely from the tense of the message, but since the language provides us with a grammar we should use it correctly. Type of the Object When citing the name of an object, state what kind of object it is. Rationale: Otherwise no one will know what foo.bar.baz refers to. Brackets Square brackets are only to be used (1) in command synopses to denote optional arguments, or (2) to denote an array subscript. Rationale: Anything else does not correspond to widely-known customary usage and will confuse people. Assembling Error Messages When a message includes text that is generated elsewhere, embed it in this style: could not open file %s: %m Rationale: It would be difficult to account for all possible error codes to paste this into a single smooth sentence, so some sort of punctuation is needed. Putting the embedded text in parentheses has also been suggested, but it's unnatural if the embedded text is likely to be the most important part of the message, as is often the case. Reasons for Errors Messages should always state the reason why an error occurred. For example: BAD: could not open file %s BETTER: could not open file %s (I/O failure) If no reason is known you better fix the code. Function Names Don't include the name of the reporting routine in the error text. We have other mechanisms for finding that out when needed, and for most users it's not helpful information. If the error text doesn't make as much sense without the function name, reword it. BAD: pg_strtoint32: error in "z": cannot parse "z" BETTER: invalid input syntax for type integer: "z" Avoid mentioning called function names, either; instead say what the code was trying to do: BAD: open() failed: %m BETTER: could not open file %s: %m If it really seems necessary, mention the system call in the detail message. (In some cases, providing the actual values passed to the system call might be appropriate information for the detail message.) Rationale: Users don't know what all those functions do. Tricky Words to Avoid Unable Unable is nearly the passive voice. Better use cannot or could not, as appropriate. Bad Error messages like bad result are really hard to interpret intelligently. It's better to write why the result is bad, e.g., invalid format. Illegal Illegal stands for a violation of the law, the rest is invalid. Better yet, say why it's invalid. Unknown Try to avoid unknown. Consider error: unknown response. If you don't know what the response is, how do you know it's erroneous? Unrecognized is often a better choice. Also, be sure to include the value being complained of. BAD: unknown node type BETTER: unrecognized node type: 42 Find vs. Exists If the program uses a nontrivial algorithm to locate a resource (e.g., a path search) and that algorithm fails, it is fair to say that the program couldn't find the resource. If, on the other hand, the expected location of the resource is known but the program cannot access it there then say that the resource doesn't exist. Using find in this case sounds weak and confuses the issue. May vs. Can vs. Might May suggests permission (e.g., "You may borrow my rake."), and has little use in documentation or error messages. Can suggests ability (e.g., "I can lift that log."), and might suggests possibility (e.g., "It might rain today."). Using the proper word clarifies meaning and assists translation. Contractions Avoid contractions, like can't; use cannot instead. Non-negative Avoid non-negative as it is ambiguous about whether it accepts zero. It's better to use greater than zero or greater than or equal to zero. Proper Spelling Spell out words in full. For instance, avoid: spec stats parens auth xact Rationale: This will improve consistency. Localization Keep in mind that error message texts need to be translated into other languages. Follow the guidelines in to avoid making life difficult for translators. Miscellaneous Coding Conventions C Standard Code in PostgreSQL should only rely on language features available in the C99 standard. That means a conforming C99 compiler has to be able to compile postgres, at least aside from a few platform dependent pieces. A few features included in the C99 standard are, at this time, not permitted to be used in core PostgreSQL code. This currently includes variable length arrays, intermingled declarations and code, // comments, universal character names. Reasons for that include portability and historical practices. Features from later revisions of the C standard or compiler specific features can be used, if a fallback is provided. For example _Static_assert() and __builtin_constant_p are currently used, even though they are from newer revisions of the C standard and a GCC extension respectively. If not available we respectively fall back to using a C99 compatible replacement that performs the same checks, but emits rather cryptic messages and do not use __builtin_constant_p. Function-Like Macros and Inline Functions Both macros with arguments and static inline functions may be used. The latter are preferable if there are multiple-evaluation hazards when written as a macro, as e.g., the case with #define Max(x, y) ((x) > (y) ? (x) : (y)) or when the macro would be very long. In other cases it's only possible to use macros, or at least easier. For example because expressions of various types need to be passed to the macro. When the definition of an inline function references symbols (i.e., variables, functions) that are only available as part of the backend, the function may not be visible when included from frontend code. #ifndef FRONTEND static inline MemoryContext MemoryContextSwitchTo(MemoryContext context) { MemoryContext old = CurrentMemoryContext; CurrentMemoryContext = context; return old; } #endif /* FRONTEND */ In this example CurrentMemoryContext, which is only available in the backend, is referenced and the function thus hidden with a #ifndef FRONTEND. This rule exists because some compilers emit references to symbols contained in inline functions even if the function is not used. Writing Signal Handlers To be suitable to run inside a signal handler code has to be written very carefully. The fundamental problem is that, unless blocked, a signal handler can interrupt code at any time. If code inside the signal handler uses the same state as code outside chaos may ensue. As an example consider what happens if a signal handler tries to acquire a lock that's already held in the interrupted code. Barring special arrangements code in signal handlers may only call async-signal safe functions (as defined in POSIX) and access variables of type volatile sig_atomic_t. A few functions in postgres are also deemed signal safe, importantly SetLatch(). In most cases signal handlers should do nothing more than note that a signal has arrived, and wake up code running outside of the handler using a latch. An example of such a handler is the following: static void handle_sighup(SIGNAL_ARGS) { int save_errno = errno; got_SIGHUP = true; SetLatch(MyLatch); errno = save_errno; } errno is saved and restored because SetLatch() might change it. If that were not done interrupted code that's currently inspecting errno might see the wrong value. Calling Function Pointers For clarity, it is preferred to explicitly dereference a function pointer when calling the pointed-to function if the pointer is a simple variable, for example: (*emit_log_hook) (edata); (even though emit_log_hook(edata) would also work). When the function pointer is part of a structure, then the extra punctuation can and usually should be omitted, for example: paramInfo->paramFetch(paramInfo, paramId);