path: root/src/test/regress/expected/opr_sanity.out

--
-- OPR_SANITY
-- Sanity checks for common errors in making operator/procedure system tables:
-- pg_operator, pg_proc, pg_cast, pg_conversion, pg_aggregate, pg_am,
-- pg_amop, pg_amproc, pg_opclass, pg_opfamily, pg_index.
--
-- Every test failure in this file should be closely inspected.
-- The description of the failing test should be read carefully before
-- adjusting the expected output.  In most cases, the queries should
-- not find *any* matching entries.
--
-- NB: we assume the oidjoins test will have caught any dangling links,
-- that is OID or REGPROC fields that are not zero and do not match some
-- row in the linked-to table.  However, if we want to enforce that a link
-- field can't be 0, we have to check it here.
--
-- NB: run this test earlier than the create_operator test, because
-- that test creates some bogus operators...
-- **************** pg_proc ****************
-- Look for illegal values in pg_proc fields.
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE p1.prolang = 0 OR p1.prorettype = 0 OR
       p1.pronargs < 0 OR
       p1.pronargdefaults < 0 OR
       p1.pronargdefaults > p1.pronargs OR
       array_lower(p1.proargtypes, 1) != 0 OR
       array_upper(p1.proargtypes, 1) != p1.pronargs-1 OR
       0::oid = ANY (p1.proargtypes) OR
       procost <= 0 OR
       CASE WHEN proretset THEN prorows <= 0 ELSE prorows != 0 END OR
       prokind NOT IN ('f', 'a', 'w', 'p') OR
       provolatile NOT IN ('i', 's', 'v') OR
       proparallel NOT IN ('s', 'r', 'u');
 oid | proname 
-----+---------
(0 rows)

-- prosrc should never be null; it can be empty only if prosqlbody isn't null
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE prosrc IS NULL;
 oid | proname 
-----+---------
(0 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE (prosrc = '' OR prosrc = '-') AND prosqlbody IS NULL;
 oid | proname 
-----+---------
(0 rows)

-- proretset should only be set for normal functions
SELECT p1.oid, p1.proname
FROM pg_proc AS p1
WHERE proretset AND prokind != 'f';
 oid | proname 
-----+---------
(0 rows)

-- currently, no built-in functions should be SECURITY DEFINER;
-- this might change in future, but there will probably never be many.
SELECT p1.oid, p1.proname
FROM pg_proc AS p1
WHERE prosecdef
ORDER BY 1;
 oid | proname 
-----+---------
(0 rows)

-- pronargdefaults should be 0 iff proargdefaults is null
SELECT p1.oid, p1.proname
FROM pg_proc AS p1
WHERE (pronargdefaults <> 0) != (proargdefaults IS NOT NULL);
 oid | proname 
-----+---------
(0 rows)

-- probin should be non-empty for C functions, null everywhere else
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE prolang = 13 AND (probin IS NULL OR probin = '' OR probin = '-');
 oid | proname 
-----+---------
(0 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE prolang != 13 AND probin IS NOT NULL;
 oid | proname 
-----+---------
(0 rows)

-- Look for conflicting proc definitions (same names and input datatypes).
-- (This test should be dead code now that we have the unique index
-- pg_proc_proname_args_nsp_index, but I'll leave it in anyway.)
SELECT p1.oid, p1.proname, p2.oid, p2.proname
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.proname = p2.proname AND
    p1.pronargs = p2.pronargs AND
    p1.proargtypes = p2.proargtypes;
 oid | proname | oid | proname 
-----+---------+-----+---------
(0 rows)

-- Considering only built-in procs (prolang = 12), look for multiple uses
-- of the same internal function (ie, matching prosrc fields).  It's OK to
-- have several entries with different pronames for the same internal function,
-- but conflicts in the number of arguments and other critical items should
-- be complained of.  (We don't check data types here; see next query.)
-- Note: ignore aggregate functions here, since they all point to the same
-- dummy built-in function.
SELECT p1.oid, p1.proname, p2.oid, p2.proname
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid < p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    (p1.prokind != 'a' OR p2.prokind != 'a') AND
    (p1.prolang != p2.prolang OR
     p1.prokind != p2.prokind OR
     p1.prosecdef != p2.prosecdef OR
     p1.proleakproof != p2.proleakproof OR
     p1.proisstrict != p2.proisstrict OR
     p1.proretset != p2.proretset OR
     p1.provolatile != p2.provolatile OR
     p1.pronargs != p2.pronargs);
 oid | proname | oid | proname 
-----+---------+-----+---------
(0 rows)

-- Look for uses of different type OIDs in the argument/result type fields
-- for different aliases of the same built-in function.
-- This indicates that the types are being presumed to be binary-equivalent,
-- or that the built-in function is prepared to deal with different types.
-- That's not wrong, necessarily, but we make lists of all the types being
-- so treated.  Note that the expected output of this part of the test will
-- need to be modified whenever new pairs of types are made binary-equivalent,
-- or when new polymorphic built-in functions are added!
-- Note: ignore aggregate functions here, since they all point to the same
-- dummy built-in function.  Likewise, ignore range and multirange constructor
-- functions.
SELECT DISTINCT p1.prorettype::regtype, p2.prorettype::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    p1.prosrc NOT LIKE E'range\\_constructor_' AND
    p2.prosrc NOT LIKE E'range\\_constructor_' AND
    p1.prosrc NOT LIKE E'multirange\\_constructor_' AND
    p2.prosrc NOT LIKE E'multirange\\_constructor_' AND
    (p1.prorettype < p2.prorettype)
ORDER BY 1, 2;
         prorettype          |        prorettype        
-----------------------------+--------------------------
 bigint                      | xid8
 text                        | character varying
 timestamp without time zone | timestamp with time zone
 txid_snapshot               | pg_snapshot
(4 rows)

SELECT DISTINCT p1.proargtypes[0]::regtype, p2.proargtypes[0]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    p1.prosrc NOT LIKE E'range\\_constructor_' AND
    p2.prosrc NOT LIKE E'range\\_constructor_' AND
    p1.prosrc NOT LIKE E'multirange\\_constructor_' AND
    p2.prosrc NOT LIKE E'multirange\\_constructor_' AND
    (p1.proargtypes[0] < p2.proargtypes[0])
ORDER BY 1, 2;
         proargtypes         |       proargtypes        
-----------------------------+--------------------------
 bigint                      | xid8
 text                        | character
 text                        | character varying
 timestamp without time zone | timestamp with time zone
 bit                         | bit varying
 txid_snapshot               | pg_snapshot
(6 rows)

SELECT DISTINCT p1.proargtypes[1]::regtype, p2.proargtypes[1]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    p1.prosrc NOT LIKE E'range\\_constructor_' AND
    p2.prosrc NOT LIKE E'range\\_constructor_' AND
    p1.prosrc NOT LIKE E'multirange\\_constructor_' AND
    p2.prosrc NOT LIKE E'multirange\\_constructor_' AND
    (p1.proargtypes[1] < p2.proargtypes[1])
ORDER BY 1, 2;
         proargtypes         |       proargtypes        
-----------------------------+--------------------------
 integer                     | xid
 timestamp without time zone | timestamp with time zone
 bit                         | bit varying
 txid_snapshot               | pg_snapshot
 anyrange                    | anymultirange
(5 rows)

SELECT DISTINCT p1.proargtypes[2]::regtype, p2.proargtypes[2]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    (p1.proargtypes[2] < p2.proargtypes[2])
ORDER BY 1, 2;
         proargtypes         |       proargtypes        
-----------------------------+--------------------------
 timestamp without time zone | timestamp with time zone
(1 row)

SELECT DISTINCT p1.proargtypes[3]::regtype, p2.proargtypes[3]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    (p1.proargtypes[3] < p2.proargtypes[3])
ORDER BY 1, 2;
         proargtypes         |       proargtypes        
-----------------------------+--------------------------
 timestamp without time zone | timestamp with time zone
(1 row)

SELECT DISTINCT p1.proargtypes[4]::regtype, p2.proargtypes[4]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    (p1.proargtypes[4] < p2.proargtypes[4])
ORDER BY 1, 2;
 proargtypes | proargtypes 
-------------+-------------
(0 rows)

SELECT DISTINCT p1.proargtypes[5]::regtype, p2.proargtypes[5]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    (p1.proargtypes[5] < p2.proargtypes[5])
ORDER BY 1, 2;
 proargtypes | proargtypes 
-------------+-------------
(0 rows)

SELECT DISTINCT p1.proargtypes[6]::regtype, p2.proargtypes[6]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    (p1.proargtypes[6] < p2.proargtypes[6])
ORDER BY 1, 2;
 proargtypes | proargtypes 
-------------+-------------
(0 rows)

SELECT DISTINCT p1.proargtypes[7]::regtype, p2.proargtypes[7]::regtype
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid != p2.oid AND
    p1.prosrc = p2.prosrc AND
    p1.prolang = 12 AND p2.prolang = 12 AND
    p1.prokind != 'a' AND p2.prokind != 'a' AND
    (p1.proargtypes[7] < p2.proargtypes[7])
ORDER BY 1, 2;
 proargtypes | proargtypes 
-------------+-------------
(0 rows)

-- Look for functions that return type "internal" and do not have any
-- "internal" argument.  Such a function would be a security hole since
-- it might be used to call an internal function from an SQL command.
-- As of 7.3 this query should find only internal_in, which is safe because
-- it always throws an error when called.
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE p1.prorettype = 'internal'::regtype AND NOT
    'internal'::regtype = ANY (p1.proargtypes);
 oid  |   proname   
------+-------------
 2304 | internal_in
(1 row)

-- Look for functions that return a polymorphic type and do not have any
-- polymorphic argument.  Calls of such functions would be unresolvable
-- at parse time.  As of 9.6 this query should find only some input functions
-- and GiST support functions associated with these pseudotypes.
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE p1.prorettype IN
    ('anyelement'::regtype, 'anyarray'::regtype, 'anynonarray'::regtype,
     'anyenum'::regtype)
  AND NOT
    ('anyelement'::regtype = ANY (p1.proargtypes) OR
     'anyarray'::regtype = ANY (p1.proargtypes) OR
     'anynonarray'::regtype = ANY (p1.proargtypes) OR
     'anyenum'::regtype = ANY (p1.proargtypes) OR
     'anyrange'::regtype = ANY (p1.proargtypes) OR
     'anymultirange'::regtype = ANY (p1.proargtypes))
ORDER BY 2;
 oid  |    proname     
------+----------------
 2296 | anyarray_in
 2502 | anyarray_recv
 2312 | anyelement_in
 3504 | anyenum_in
 2777 | anynonarray_in
  750 | array_in
 2400 | array_recv
 3506 | enum_in
 3532 | enum_recv
(9 rows)

-- anyrange and anymultirange are tighter than the rest, can only resolve
-- from each other
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE p1.prorettype IN ('anyrange'::regtype, 'anymultirange'::regtype)
  AND NOT
    ('anyrange'::regtype = ANY (p1.proargtypes) OR
      'anymultirange'::regtype = ANY (p1.proargtypes))
ORDER BY 2;
 oid  |     proname      
------+------------------
 4229 | anymultirange_in
 3832 | anyrange_in
 4231 | multirange_in
 4233 | multirange_recv
 3876 | range_gist_union
 3834 | range_in
 3836 | range_recv
(7 rows)

-- similarly for the anycompatible family
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE p1.prorettype IN
    ('anycompatible'::regtype, 'anycompatiblearray'::regtype,
     'anycompatiblenonarray'::regtype)
  AND NOT
    ('anycompatible'::regtype = ANY (p1.proargtypes) OR
     'anycompatiblearray'::regtype = ANY (p1.proargtypes) OR
     'anycompatiblenonarray'::regtype = ANY (p1.proargtypes) OR
     'anycompatiblerange'::regtype = ANY (p1.proargtypes))
ORDER BY 2;
 oid  |         proname          
------+--------------------------
 5086 | anycompatible_in
 5088 | anycompatiblearray_in
 5090 | anycompatiblearray_recv
 5092 | anycompatiblenonarray_in
(4 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE p1.prorettype = 'anycompatiblerange'::regtype
  AND NOT
     'anycompatiblerange'::regtype = ANY (p1.proargtypes)
ORDER BY 2;
 oid  |        proname        
------+-----------------------
 5094 | anycompatiblerange_in
(1 row)

-- Look for functions that accept cstring and are neither datatype input
-- functions nor encoding conversion functions.  It's almost never a good
-- idea to use cstring input for a function meant to be called from SQL;
-- text should be used instead, because cstring lacks suitable casts.
-- As of 9.6 this query should find only cstring_out and cstring_send.
-- However, we must manually exclude shell_in, which might or might not be
-- rejected by the EXISTS clause depending on whether there are currently
-- any shell types.
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE 'cstring'::regtype = ANY (p1.proargtypes)
    AND NOT EXISTS(SELECT 1 FROM pg_type WHERE typinput = p1.oid)
    AND NOT EXISTS(SELECT 1 FROM pg_conversion WHERE conproc = p1.oid)
    AND p1.oid != 'shell_in(cstring)'::regprocedure
ORDER BY 1;
 oid  |   proname    
------+--------------
 2293 | cstring_out
 2501 | cstring_send
(2 rows)

-- Likewise, look for functions that return cstring and aren't datatype output
-- functions nor typmod output functions.
-- As of 9.6 this query should find only cstring_in and cstring_recv.
-- However, we must manually exclude shell_out.
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE  p1.prorettype = 'cstring'::regtype
    AND NOT EXISTS(SELECT 1 FROM pg_type WHERE typoutput = p1.oid)
    AND NOT EXISTS(SELECT 1 FROM pg_type WHERE typmodout = p1.oid)
    AND p1.oid != 'shell_out(void)'::regprocedure
ORDER BY 1;
 oid  |   proname    
------+--------------
 2292 | cstring_in
 2500 | cstring_recv
(2 rows)

-- Check for length inconsistencies between the various argument-info arrays.
SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE proallargtypes IS NOT NULL AND
    array_length(proallargtypes,1) < array_length(proargtypes,1);
 oid | proname 
-----+---------
(0 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE proargmodes IS NOT NULL AND
    array_length(proargmodes,1) < array_length(proargtypes,1);
 oid | proname 
-----+---------
(0 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE proargnames IS NOT NULL AND
    array_length(proargnames,1) < array_length(proargtypes,1);
 oid | proname 
-----+---------
(0 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE proallargtypes IS NOT NULL AND proargmodes IS NOT NULL AND
    array_length(proallargtypes,1) <> array_length(proargmodes,1);
 oid | proname 
-----+---------
(0 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE proallargtypes IS NOT NULL AND proargnames IS NOT NULL AND
    array_length(proallargtypes,1) <> array_length(proargnames,1);
 oid | proname 
-----+---------
(0 rows)

SELECT p1.oid, p1.proname
FROM pg_proc as p1
WHERE proargmodes IS NOT NULL AND proargnames IS NOT NULL AND
    array_length(proargmodes,1) <> array_length(proargnames,1);
 oid | proname 
-----+---------
(0 rows)

-- Check that proallargtypes matches proargtypes
SELECT p1.oid, p1.proname, p1.proargtypes, p1.proallargtypes, p1.proargmodes
FROM pg_proc as p1
WHERE proallargtypes IS NOT NULL AND
  ARRAY(SELECT unnest(proargtypes)) <>
  ARRAY(SELECT proallargtypes[i]
        FROM generate_series(1, array_length(proallargtypes, 1)) g(i)
        WHERE proargmodes IS NULL OR proargmodes[i] IN ('i', 'b', 'v'));
 oid | proname | proargtypes | proallargtypes | proargmodes 
-----+---------+-------------+----------------+-------------
(0 rows)

-- Check for prosupport functions with the wrong signature
SELECT p1.oid, p1.proname, p2.oid, p2.proname
FROM pg_proc AS p1, pg_proc AS p2
WHERE p2.oid = p1.prosupport AND
    (p2.prorettype != 'internal'::regtype OR p2.proretset OR p2.pronargs != 1
     OR p2.proargtypes[0] != 'internal'::regtype);
 oid | proname | oid | proname 
-----+---------+-----+---------
(0 rows)

-- Insist that all built-in pg_proc entries have descriptions
SELECT p1.oid, p1.proname
FROM pg_proc as p1 LEFT JOIN pg_description as d
     ON p1.tableoid = d.classoid and p1.oid = d.objoid and d.objsubid = 0
WHERE d.classoid IS NULL AND p1.oid <= 9999;
 oid | proname 
-----+---------
(0 rows)

-- List of built-in leakproof functions
--
-- Leakproof functions should only be added after carefully
-- scrutinizing all possibly executed codepaths for possible
-- information leaks. Don't add functions here unless you know what a
-- leakproof function is. If unsure, don't mark it as such.
-- temporarily disable fancy output, so catalog changes create less diff noise
\a\t
SELECT p1.oid::regprocedure
FROM pg_proc p1 JOIN pg_namespace pn
     ON pronamespace = pn.oid
WHERE nspname = 'pg_catalog' AND proleakproof
ORDER BY 1;
boollt(boolean,boolean)
boolgt(boolean,boolean)
booleq(boolean,boolean)
chareq("char","char")
nameeq(name,name)
int2eq(smallint,smallint)
int2lt(smallint,smallint)
int4eq(integer,integer)
int4lt(integer,integer)
texteq(text,text)
xideq(xid,xid)
cideq(cid,cid)
charne("char","char")
charle("char","char")
chargt("char","char")
charge("char","char")
boolne(boolean,boolean)
int4ne(integer,integer)
int2ne(smallint,smallint)
int2gt(smallint,smallint)
int4gt(integer,integer)
int2le(smallint,smallint)
int4le(integer,integer)
int4ge(integer,integer)
int2ge(smallint,smallint)
textne(text,text)
int24eq(smallint,integer)
int42eq(integer,smallint)
int24lt(smallint,integer)
int42lt(integer,smallint)
int24gt(smallint,integer)
int42gt(integer,smallint)
int24ne(smallint,integer)
int42ne(integer,smallint)
int24le(smallint,integer)
int42le(integer,smallint)
int24ge(smallint,integer)
int42ge(integer,smallint)
oideq(oid,oid)
oidne(oid,oid)
float8(smallint)
float4(smallint)
nameeqtext(name,text)
namelttext(name,text)
nameletext(name,text)
namegetext(name,text)
namegttext(name,text)
namenetext(name,text)
btnametextcmp(name,text)
texteqname(text,name)
textltname(text,name)
textlename(text,name)
textgename(text,name)
textgtname(text,name)
textnename(text,name)
bttextnamecmp(text,name)
float4eq(real,real)
float4ne(real,real)
float4lt(real,real)
float4le(real,real)
float4gt(real,real)
float4ge(real,real)
float8eq(double precision,double precision)
float8ne(double precision,double precision)
float8lt(double precision,double precision)
float8le(double precision,double precision)
float8gt(double precision,double precision)
float8ge(double precision,double precision)
float48eq(real,double precision)
float48ne(real,double precision)
float48lt(real,double precision)
float48le(real,double precision)
float48gt(real,double precision)
float48ge(real,double precision)
float84eq(double precision,real)
float84ne(double precision,real)
float84lt(double precision,real)
float84le(double precision,real)
float84gt(double precision,real)
float84ge(double precision,real)
float8(real)
int4(smallint)
float8(integer)
float4(integer)
btint2cmp(smallint,smallint)
btint4cmp(integer,integer)
btfloat4cmp(real,real)
btfloat8cmp(double precision,double precision)
btoidcmp(oid,oid)
btcharcmp("char","char")
btnamecmp(name,name)
bttextcmp(text,text)
cash_cmp(money,money)
btoidvectorcmp(oidvector,oidvector)
text(name)
name(text)
name(character)
text_larger(text,text)
text_smaller(text,text)
int8eq(bigint,bigint)
int8ne(bigint,bigint)
int8lt(bigint,bigint)
int8gt(bigint,bigint)
int8le(bigint,bigint)
int8ge(bigint,bigint)
int84eq(bigint,integer)
int84ne(bigint,integer)
int84lt(bigint,integer)
int84gt(bigint,integer)
int84le(bigint,integer)
int84ge(bigint,integer)
int8(integer)
float8(bigint)
oidvectorne(oidvector,oidvector)
float4(bigint)
namelt(name,name)
namele(name,name)
namegt(name,name)
namege(name,name)
namene(name,name)
oidvectorlt(oidvector,oidvector)
oidvectorle(oidvector,oidvector)
oidvectoreq(oidvector,oidvector)
oidvectorge(oidvector,oidvector)
oidvectorgt(oidvector,oidvector)
oidlt(oid,oid)
oidle(oid,oid)
text_lt(text,text)
text_le(text,text)
text_gt(text,text)
text_ge(text,text)
int8(smallint)
macaddr_eq(macaddr,macaddr)
macaddr_lt(macaddr,macaddr)
macaddr_le(macaddr,macaddr)
macaddr_gt(macaddr,macaddr)
macaddr_ge(macaddr,macaddr)
macaddr_ne(macaddr,macaddr)
macaddr_cmp(macaddr,macaddr)
btint8cmp(bigint,bigint)
int48eq(integer,bigint)
int48ne(integer,bigint)
int48lt(integer,bigint)
int48gt(integer,bigint)
int48le(integer,bigint)
int48ge(integer,bigint)
cash_eq(money,money)
cash_ne(money,money)
cash_lt(money,money)
cash_le(money,money)
cash_gt(money,money)
cash_ge(money,money)
network_eq(inet,inet)
network_lt(inet,inet)
network_le(inet,inet)
network_gt(inet,inet)
network_ge(inet,inet)
network_ne(inet,inet)
network_cmp(inet,inet)
lseg_eq(lseg,lseg)
bpchareq(character,character)
bpcharlt(character,character)
bpcharle(character,character)
bpchargt(character,character)
bpcharge(character,character)
bpcharne(character,character)
bpchar_larger(character,character)
bpchar_smaller(character,character)
bpcharcmp(character,character)
date_eq(date,date)
date_lt(date,date)
date_le(date,date)
date_gt(date,date)
date_ge(date,date)
date_ne(date,date)
date_cmp(date,date)
time_lt(time without time zone,time without time zone)
time_le(time without time zone,time without time zone)
time_gt(time without time zone,time without time zone)
time_ge(time without time zone,time without time zone)
time_ne(time without time zone,time without time zone)
time_cmp(time without time zone,time without time zone)
time_eq(time without time zone,time without time zone)
timestamptz_eq(timestamp with time zone,timestamp with time zone)
timestamptz_ne(timestamp with time zone,timestamp with time zone)
timestamptz_lt(timestamp with time zone,timestamp with time zone)
timestamptz_le(timestamp with time zone,timestamp with time zone)
timestamptz_ge(timestamp with time zone,timestamp with time zone)
timestamptz_gt(timestamp with time zone,timestamp with time zone)
interval_eq(interval,interval)
interval_ne(interval,interval)
interval_lt(interval,interval)
interval_le(interval,interval)
interval_ge(interval,interval)
interval_gt(interval,interval)
charlt("char","char")
tidne(tid,tid)
int8(oid)
tideq(tid,tid)
timestamptz_cmp(timestamp with time zone,timestamp with time zone)
interval_cmp(interval,interval)
xideqint4(xid,integer)
timetz_eq(time with time zone,time with time zone)
timetz_ne(time with time zone,time with time zone)
timetz_lt(time with time zone,time with time zone)
timetz_le(time with time zone,time with time zone)
timetz_ge(time with time zone,time with time zone)
timetz_gt(time with time zone,time with time zone)
timetz_cmp(time with time zone,time with time zone)
"interval"(time without time zone)
name(character varying)
"varchar"(name)
circle_eq(circle,circle)
circle_ne(circle,circle)
circle_lt(circle,circle)
circle_gt(circle,circle)
circle_le(circle,circle)
circle_ge(circle,circle)
lseg_ne(lseg,lseg)
lseg_lt(lseg,lseg)
lseg_le(lseg,lseg)
lseg_gt(lseg,lseg)
lseg_ge(lseg,lseg)
biteq(bit,bit)
bitne(bit,bit)
bitge(bit,bit)
bitgt(bit,bit)
bitle(bit,bit)
bitlt(bit,bit)
bitcmp(bit,bit)
oidgt(oid,oid)
oidge(oid,oid)
varbiteq(bit varying,bit varying)
varbitne(bit varying,bit varying)
varbitge(bit varying,bit varying)
varbitgt(bit varying,bit varying)
varbitle(bit varying,bit varying)
varbitlt(bit varying,bit varying)
varbitcmp(bit varying,bit varying)
boolle(boolean,boolean)
boolge(boolean,boolean)
btboolcmp(boolean,boolean)
"numeric"(integer)
"numeric"(real)
"numeric"(double precision)
"numeric"(bigint)
"numeric"(smallint)
int28eq(smallint,bigint)
int28ne(smallint,bigint)
int28lt(smallint,bigint)
int28gt(smallint,bigint)
int28le(smallint,bigint)
int28ge(smallint,bigint)
int82eq(bigint,smallint)
int82ne(bigint,smallint)
int82lt(bigint,smallint)
int82gt(bigint,smallint)
int82le(bigint,smallint)
int82ge(bigint,smallint)
byteaeq(bytea,bytea)
bytealt(bytea,bytea)
byteale(bytea,bytea)
byteagt(bytea,bytea)
byteage(bytea,bytea)
byteane(bytea,bytea)
byteacmp(bytea,bytea)
timestamp_cmp(timestamp without time zone,timestamp without time zone)
timestamp_eq(timestamp without time zone,timestamp without time zone)
timestamp_ne(timestamp without time zone,timestamp without time zone)
timestamp_lt(timestamp without time zone,timestamp without time zone)
timestamp_le(timestamp without time zone,timestamp without time zone)
timestamp_ge(timestamp without time zone,timestamp without time zone)
timestamp_gt(timestamp without time zone,timestamp without time zone)
text_pattern_lt(text,text)
text_pattern_le(text,text)
text_pattern_ge(text,text)
text_pattern_gt(text,text)
bttext_pattern_cmp(text,text)
bpchar_pattern_lt(character,character)
bpchar_pattern_le(character,character)
bpchar_pattern_ge(character,character)
bpchar_pattern_gt(character,character)
btbpchar_pattern_cmp(character,character)
btint48cmp(integer,bigint)
btint84cmp(bigint,integer)
btint24cmp(smallint,integer)
btint42cmp(integer,smallint)
btint28cmp(smallint,bigint)
btint82cmp(bigint,smallint)
btfloat48cmp(real,double precision)
btfloat84cmp(double precision,real)
md5(text)
md5(bytea)
bool(integer)
int4(boolean)
tidgt(tid,tid)
tidlt(tid,tid)
tidge(tid,tid)
tidle(tid,tid)
bttidcmp(tid,tid)
uuid_lt(uuid,uuid)
uuid_le(uuid,uuid)
uuid_eq(uuid,uuid)
uuid_ge(uuid,uuid)
uuid_gt(uuid,uuid)
uuid_ne(uuid,uuid)
uuid_cmp(uuid,uuid)
pg_lsn_lt(pg_lsn,pg_lsn)
pg_lsn_le(pg_lsn,pg_lsn)
pg_lsn_eq(pg_lsn,pg_lsn)
pg_lsn_ge(pg_lsn,pg_lsn)
pg_lsn_gt(pg_lsn,pg_lsn)
pg_lsn_ne(pg_lsn,pg_lsn)
pg_lsn_cmp(pg_lsn,pg_lsn)
xidneq(xid,xid)
xidneqint4(xid,integer)
sha224(bytea)
sha256(bytea)
sha384(bytea)
sha512(bytea)
gen_random_uuid()
starts_with(text,text)
macaddr8_eq(macaddr8,macaddr8)
macaddr8_lt(macaddr8,macaddr8)
macaddr8_le(macaddr8,macaddr8)
macaddr8_gt(macaddr8,macaddr8)
macaddr8_ge(macaddr8,macaddr8)
macaddr8_ne(macaddr8,macaddr8)
macaddr8_cmp(macaddr8,macaddr8)
macaddr8(macaddr)
xid8lt(xid8,xid8)
xid8gt(xid8,xid8)
xid8le(xid8,xid8)
xid8ge(xid8,xid8)
xid8eq(xid8,xid8)
xid8ne(xid8,xid8)
xid8cmp(xid8,xid8)
-- restore normal output mode
\a\t
-- List of functions used by libpq's fe-lobj.c
--
-- If the output of this query changes, you probably broke libpq.
-- lo_initialize() assumes that there will be at most one match for
-- each listed name.
select proname, oid from pg_catalog.pg_proc
where proname in (
  'lo_open',
  'lo_close',
  'lo_creat',
  'lo_create',
  'lo_unlink',
  'lo_lseek',
  'lo_lseek64',
  'lo_tell',
  'lo_tell64',
  'lo_truncate',
  'lo_truncate64',
  'loread',
  'lowrite')
and pronamespace = (select oid from pg_catalog.pg_namespace
                    where nspname = 'pg_catalog')
order by 1;
    proname    | oid  
---------------+------
 lo_close      |  953
 lo_creat      |  957
 lo_create     |  715
 lo_lseek      |  956
 lo_lseek64    | 3170
 lo_open       |  952
 lo_tell       |  958
 lo_tell64     | 3171
 lo_truncate   | 1004
 lo_truncate64 | 3172
 lo_unlink     |  964
 loread        |  954
 lowrite       |  955
(13 rows)

-- Check that all immutable functions are marked parallel safe
SELECT p1.oid, p1.proname
FROM pg_proc AS p1
WHERE provolatile = 'i' AND proparallel = 'u';
 oid | proname 
-----+---------
(0 rows)

-- **************** pg_cast ****************
-- Catch bogus values in pg_cast columns (other than cases detected by
-- oidjoins test).
SELECT *
FROM pg_cast c
WHERE castsource = 0 OR casttarget = 0 OR castcontext NOT IN ('e', 'a', 'i')
    OR castmethod NOT IN ('f', 'b' ,'i');
 oid | castsource | casttarget | castfunc | castcontext | castmethod 
-----+------------+------------+----------+-------------+------------
(0 rows)

-- Check that castfunc is nonzero only for cast methods that need a function,
-- and zero otherwise
SELECT *
FROM pg_cast c
WHERE (castmethod = 'f' AND castfunc = 0)
   OR (castmethod IN ('b', 'i') AND castfunc <> 0);
 oid | castsource | casttarget | castfunc | castcontext | castmethod 
-----+------------+------------+----------+-------------+------------
(0 rows)

-- Look for casts to/from the same type that aren't length coercion functions.
-- (We assume they are length coercions if they take multiple arguments.)
-- Such entries are not necessarily harmful, but they are useless.
SELECT *
FROM pg_cast c
WHERE castsource = casttarget AND castfunc = 0;
 oid | castsource | casttarget | castfunc | castcontext | castmethod 
-----+------------+------------+----------+-------------+------------
(0 rows)

SELECT c.*
FROM pg_cast c, pg_proc p
WHERE c.castfunc = p.oid AND p.pronargs < 2 AND castsource = casttarget;
 oid | castsource | casttarget | castfunc | castcontext | castmethod 
-----+------------+------------+----------+-------------+------------
(0 rows)

-- Look for cast functions that don't have the right signature.  The
-- argument and result types in pg_proc must be the same as, or binary
-- compatible with, what it says in pg_cast.
-- As a special case, we allow casts from CHAR(n) that use functions
-- declared to take TEXT.  This does not pass the binary-coercibility test
-- because CHAR(n)-to-TEXT normally invokes rtrim().  However, the results
-- are the same, so long as the function is one that ignores trailing blanks.
SELECT c.*
FROM pg_cast c, pg_proc p
WHERE c.castfunc = p.oid AND
    (p.pronargs < 1 OR p.pronargs > 3
     OR NOT (binary_coercible(c.castsource, p.proargtypes[0])
             OR (c.castsource = 'character'::regtype AND
                 p.proargtypes[0] = 'text'::regtype))
     OR NOT binary_coercible(p.prorettype, c.casttarget));
 oid | castsource | casttarget | castfunc | castcontext | castmethod 
-----+------------+------------+----------+-------------+------------
(0 rows)

SELECT c.*
FROM pg_cast c, pg_proc p
WHERE c.castfunc = p.oid AND
    ((p.pronargs > 1 AND p.proargtypes[1] != 'int4'::regtype) OR
     (p.pronargs > 2 AND p.proargtypes[2] != 'bool'::regtype));
 oid | castsource | casttarget | castfunc | castcontext | castmethod 
-----+------------+------------+----------+-------------+------------
(0 rows)

-- Look for binary compatible casts that do not have the reverse
-- direction registered as well, or where the reverse direction is not
-- also binary compatible.  This is legal, but usually not intended.
-- As of 7.4, this finds the casts from text and varchar to bpchar, because
-- those are binary-compatible while the reverse way goes through rtrim().
-- As of 8.2, this finds the cast from cidr to inet, because that is a
-- trivial binary coercion while the other way goes through inet_to_cidr().
-- As of 8.3, this finds the casts from xml to text, varchar, and bpchar,
-- because those are binary-compatible while the reverse goes through
-- texttoxml(), which does an XML syntax check.
-- As of 9.1, this finds the cast from pg_node_tree to text, which we
-- intentionally do not provide a reverse pathway for.
SELECT castsource::regtype, casttarget::regtype, castfunc, castcontext
FROM pg_cast c
WHERE c.castmethod = 'b' AND
    NOT EXISTS (SELECT 1 FROM pg_cast k
                WHERE k.castmethod = 'b' AND
                    k.castsource = c.casttarget AND
                    k.casttarget = c.castsource);
    castsource     |    casttarget     | castfunc | castcontext 
-------------------+-------------------+----------+-------------
 text              | character         |        0 | i
 character varying | character         |        0 | i
 pg_node_tree      | text              |        0 | i
 pg_ndistinct      | bytea             |        0 | i
 pg_dependencies   | bytea             |        0 | i
 pg_mcv_list       | bytea             |        0 | i
 cidr              | inet              |        0 | i
 xml               | text              |        0 | a
 xml               | character varying |        0 | a
 xml               | character         |        0 | a
(10 rows)

-- **************** pg_conversion ****************
-- Look for illegal values in pg_conversion fields.
SELECT c.oid, c.conname
FROM pg_conversion as c
WHERE c.conproc = 0 OR
    pg_encoding_to_char(conforencoding) = '' OR
    pg_encoding_to_char(contoencoding) = '';
 oid | conname 
-----+---------
(0 rows)

-- Look for conprocs that don't have the expected signature.
SELECT p.oid, p.proname, c.oid, c.conname
FROM pg_proc p, pg_conversion c
WHERE p.oid = c.conproc AND
    (p.prorettype != 'int4'::regtype OR p.proretset OR
     p.pronargs != 6 OR
     p.proargtypes[0] != 'int4'::regtype OR
     p.proargtypes[1] != 'int4'::regtype OR
     p.proargtypes[2] != 'cstring'::regtype OR
     p.proargtypes[3] != 'internal'::regtype OR
     p.proargtypes[4] != 'int4'::regtype OR
     p.proargtypes[5] != 'bool'::regtype);
 oid | proname | oid | conname 
-----+---------+-----+---------
(0 rows)

-- Check for conprocs that don't perform the specific conversion that
-- pg_conversion alleges they do, by trying to invoke each conversion
-- on some simple ASCII data.  (The conproc should throw an error if
-- it doesn't accept the encodings that are passed to it.)
-- Unfortunately, we can't test non-default conprocs this way, because
-- there is no way to ask convert() to invoke them, and we cannot call
-- them directly from SQL.  But there are no non-default built-in
-- conversions anyway.
-- (Similarly, this doesn't cope with any search path issues.)
SELECT c.oid, c.conname
FROM pg_conversion as c
WHERE condefault AND
    convert('ABC'::bytea, pg_encoding_to_char(conforencoding),
            pg_encoding_to_char(contoencoding)) != 'ABC';
 oid | conname 
-----+---------
(0 rows)

-- **************** pg_operator ****************
-- Look for illegal values in pg_operator fields.
SELECT o1.oid, o1.oprname
FROM pg_operator as o1
WHERE (o1.oprkind != 'b' AND o1.oprkind != 'l') OR
    o1.oprresult = 0 OR o1.oprcode = 0;
 oid | oprname 
-----+---------
(0 rows)

-- Look for missing or unwanted operand types
SELECT o1.oid, o1.oprname
FROM pg_operator as o1
WHERE (o1.oprleft = 0 and o1.oprkind != 'l') OR
    (o1.oprleft != 0 and o1.oprkind = 'l') OR
    o1.oprright = 0;
 oid | oprname 
-----+---------
(0 rows)

-- Look for conflicting operator definitions (same names and input datatypes).
SELECT o1.oid, o1.oprcode, o2.oid, o2.oprcode
FROM pg_operator AS o1, pg_operator AS o2
WHERE o1.oid != o2.oid AND
    o1.oprname = o2.oprname AND
    o1.oprkind = o2.oprkind AND
    o1.oprleft = o2.oprleft AND
    o1.oprright = o2.oprright;
 oid | oprcode | oid | oprcode 
-----+---------+-----+---------
(0 rows)

-- Look for commutative operators that don't commute.
-- DEFINITIONAL NOTE: If A.oprcom = B, then x A y has the same result as y B x.
-- We expect that B will always say that B.oprcom = A as well; that's not
-- inherently essential, but it would be inefficient not to mark it so.
SELECT o1.oid, o1.oprcode, o2.oid, o2.oprcode
FROM pg_operator AS o1, pg_operator AS o2
WHERE o1.oprcom = o2.oid AND
    (o1.oprkind != 'b' OR
     o1.oprleft != o2.oprright OR
     o1.oprright != o2.oprleft OR
     o1.oprresult != o2.oprresult OR
     o1.oid != o2.oprcom);
 oid | oprcode | oid | oprcode 
-----+---------+-----+---------
(0 rows)

-- Look for negatory operators that don't agree.
-- DEFINITIONAL NOTE: If A.oprnegate = B, then both A and B must yield
-- boolean results, and (x A y) == ! (x B y), or the equivalent for
-- single-operand operators.
-- We expect that B will always say that B.oprnegate = A as well; that's not
-- inherently essential, but it would be inefficient not to mark it so.
-- Also, A and B had better not be the same operator.
SELECT o1.oid, o1.oprcode, o2.oid, o2.oprcode
FROM pg_operator AS o1, pg_operator AS o2
WHERE o1.oprnegate = o2.oid AND
    (o1.oprkind != o2.oprkind OR
     o1.oprleft != o2.oprleft OR
     o1.oprright != o2.oprright OR
     o1.oprresult != 'bool'::regtype OR
     o2.oprresult != 'bool'::regtype OR
     o1.oid != o2.oprnegate OR
     o1.oid = o2.oid);
 oid | oprcode | oid | oprcode 
-----+---------+-----+---------
(0 rows)

-- Make a list of the names of operators that are claimed to be commutator
-- pairs.  This list will grow over time, but before accepting a new entry
-- make sure you didn't link the wrong operators.
SELECT DISTINCT o1.oprname AS op1, o2.oprname AS op2
FROM pg_operator o1, pg_operator o2
WHERE o1.oprcom = o2.oid AND o1.oprname <= o2.oprname
ORDER BY 1, 2;
 op1  | op2  
------+------
 #    | #
 &    | &
 &&   | &&
 *    | *
 *<   | *>
 *<=  | *>=
 *<>  | *<>
 *=   | *=
 +    | +
 -|-  | -|-
 <    | >
 <->  | <->
 <<   | >>
 <<=  | >>=
 <=   | >=
 <>   | <>
 <@   | @>
 =    | =
 ?#   | ?#
 ?-   | ?-
 ?-|  | ?-|
 ?|   | ?|
 ?||  | ?||
 @@   | @@
 @@@  | @@@
 |    | |
 ~<=~ | ~>=~
 ~<~  | ~>~
 ~=   | ~=
(29 rows)

-- Likewise for negator pairs.
SELECT DISTINCT o1.oprname AS op1, o2.oprname AS op2
FROM pg_operator o1, pg_operator o2
WHERE o1.oprnegate = o2.oid AND o1.oprname <= o2.oprname
ORDER BY 1, 2;
 op1  | op2  
------+------
 !~   | ~
 !~*  | ~*
 !~~  | ~~
 !~~* | ~~*
 *<   | *>=
 *<=  | *>
 *<>  | *=
 <    | >=
 <=   | >
 <>   | =
 <>   | ~=
 ~<=~ | ~>~
 ~<~  | ~>=~
(13 rows)

-- A mergejoinable or hashjoinable operator must be binary, must return
-- boolean, and must have a commutator (itself, unless it's a cross-type
-- operator).
SELECT o1.oid, o1.oprname FROM pg_operator AS o1
WHERE (o1.oprcanmerge OR o1.oprcanhash) AND NOT
    (o1.oprkind = 'b' AND o1.oprresult = 'bool'::regtype AND o1.oprcom != 0);
 oid | oprname 
-----+---------
(0 rows)

-- What's more, the commutator had better be mergejoinable/hashjoinable too.
SELECT o1.oid, o1.oprname, o2.oid, o2.oprname
FROM pg_operator AS o1, pg_operator AS o2
WHERE o1.oprcom = o2.oid AND
    (o1.oprcanmerge != o2.oprcanmerge OR
     o1.oprcanhash != o2.oprcanhash);
 oid | oprname | oid | oprname 
-----+---------+-----+---------
(0 rows)

-- Mergejoinable operators should appear as equality members of btree index
-- opfamilies.
SELECT o1.oid, o1.oprname
FROM pg_operator AS o1
WHERE o1.oprcanmerge AND NOT EXISTS
  (SELECT 1 FROM pg_amop
   WHERE amopmethod = (SELECT oid FROM pg_am WHERE amname = 'btree') AND
         amopopr = o1.oid AND amopstrategy = 3);
 oid | oprname 
-----+---------
(0 rows)

-- And the converse.
SELECT o1.oid, o1.oprname, p.amopfamily
FROM pg_operator AS o1, pg_amop p
WHERE amopopr = o1.oid
  AND amopmethod = (SELECT oid FROM pg_am WHERE amname = 'btree')
  AND amopstrategy = 3
  AND NOT o1.oprcanmerge;
 oid | oprname | amopfamily 
-----+---------+------------
(0 rows)

-- Hashable operators should appear as members of hash index opfamilies.
SELECT o1.oid, o1.oprname
FROM pg_operator AS o1
WHERE o1.oprcanhash AND NOT EXISTS
  (SELECT 1 FROM pg_amop
   WHERE amopmethod = (SELECT oid FROM pg_am WHERE amname = 'hash') AND
         amopopr = o1.oid AND amopstrategy = 1);
 oid | oprname 
-----+---------
(0 rows)

-- And the converse.
SELECT o1.oid, o1.oprname, p.amopfamily
FROM pg_operator AS o1, pg_amop p
WHERE amopopr = o1.oid
  AND amopmethod = (SELECT oid FROM pg_am WHERE amname = 'hash')
  AND NOT o1.oprcanhash;
 oid | oprname | amopfamily 
-----+---------+------------
(0 rows)

-- Check that each operator defined in pg_operator matches its oprcode entry
-- in pg_proc.  Easiest to do this separately for each oprkind.
SELECT o1.oid, o1.oprname, p1.oid, p1.proname
FROM pg_operator AS o1, pg_proc AS p1
WHERE o1.oprcode = p1.oid AND
    o1.oprkind = 'b' AND
    (p1.pronargs != 2
     OR NOT binary_coercible(p1.prorettype, o1.oprresult)
     OR NOT binary_coercible(o1.oprleft, p1.proargtypes[0])
     OR NOT binary_coercible(o1.oprright, p1.proargtypes[1]));
 oid | oprname | oid | proname 
-----+---------+-----+---------
(0 rows)

SELECT o1.oid, o1.oprname, p1.oid, p1.proname
FROM pg_operator AS o1, pg_proc AS p1
WHERE o1.oprcode = p1.oid AND
    o1.oprkind = 'l' AND
    (p1.pronargs != 1
     OR NOT binary_coercible(p1.prorettype, o1.oprresult)
     OR NOT binary_coercible(o1.oprright, p1.proargtypes[0])
     OR o1.oprleft != 0);
 oid | oprname | oid | proname 
-----+---------+-----+---------
(0 rows)

-- If the operator is mergejoinable or hashjoinable, its underlying function
-- should not be volatile.
SELECT o1.oid, o1.oprname, p1.oid, p1.proname
FROM pg_operator AS o1, pg_proc AS p1
WHERE o1.oprcode = p1.oid AND
    (o1.oprcanmerge OR o1.oprcanhash) AND
    p1.provolatile = 'v';
 oid | oprname | oid | proname 
-----+---------+-----+---------
(0 rows)

-- If oprrest is set, the operator must return boolean,
-- and it must link to a proc with the right signature
-- to be a restriction selectivity estimator.
-- The proc signature we want is: float8 proc(internal, oid, internal, int4)
SELECT o1.oid, o1.oprname, p2.oid, p2.proname
FROM pg_operator AS o1, pg_proc AS p2
WHERE o1.oprrest = p2.oid AND
    (o1.oprresult != 'bool'::regtype OR
     p2.prorettype != 'float8'::regtype OR p2.proretset OR
     p2.pronargs != 4 OR
     p2.proargtypes[0] != 'internal'::regtype OR
     p2.proargtypes[1] != 'oid'::regtype OR
     p2.proargtypes[2] != 'internal'::regtype OR
     p2.proargtypes[3] != 'int4'::regtype);
 oid | oprname | oid | proname 
-----+---------+-----+---------
(0 rows)

-- If oprjoin is set, the operator must be a binary boolean op,
-- and it must link to a proc with the right signature
-- to be a join selectivity estimator.
-- The proc signature we want is: float8 proc(internal, oid, internal, int2, internal)
-- (Note: the old signature with only 4 args is still allowed, but no core
-- estimator should be using it.)
SELECT o1.oid, o1.oprname, p2.oid, p2.proname
FROM pg_operator AS o1, pg_proc AS p2
WHERE o1.oprjoin = p2.oid AND
    (o1.oprkind != 'b' OR o1.oprresult != 'bool'::regtype OR
     p2.prorettype != 'float8'::regtype OR p2.proretset OR
     p2.pronargs != 5 OR
     p2.proargtypes[0] != 'internal'::regtype OR
     p2.proargtypes[1] != 'oid'::regtype OR
     p2.proargtypes[2] != 'internal'::regtype OR
     p2.proargtypes[3] != 'int2'::regtype OR
     p2.proargtypes[4] != 'internal'::regtype);
 oid | oprname | oid | proname 
-----+---------+-----+---------
(0 rows)

-- Insist that all built-in pg_operator entries have descriptions
SELECT o1.oid, o1.oprname
FROM pg_operator as o1 LEFT JOIN pg_description as d
     ON o1.tableoid = d.classoid and o1.oid = d.objoid and d.objsubid = 0
WHERE d.classoid IS NULL AND o1.oid <= 9999;
 oid | oprname 
-----+---------
(0 rows)

-- Check that operators' underlying functions have suitable comments,
-- namely 'implementation of XXX operator'.  (Note: it's not necessary to
-- put such comments into pg_proc.dat; initdb will generate them as needed.)
-- In some cases involving legacy names for operators, there are multiple
-- operators referencing the same pg_proc entry, so ignore operators whose
-- comments say they are deprecated.
-- We also have a few functions that are both operator support and meant to
-- be called directly; those should have comments matching their operator.
WITH funcdescs AS (
  SELECT p.oid as p_oid, proname, o.oid as o_oid,
    pd.description as prodesc,
    'implementation of ' || oprname || ' operator' as expecteddesc,
    od.description as oprdesc
  FROM pg_proc p JOIN pg_operator o ON oprcode = p.oid
       LEFT JOIN pg_description pd ON
         (pd.objoid = p.oid and pd.classoid = p.tableoid and pd.objsubid = 0)
       LEFT JOIN pg_description od ON
         (od.objoid = o.oid and od.classoid = o.tableoid and od.objsubid = 0)
  WHERE o.oid <= 9999
)
SELECT * FROM funcdescs
  WHERE prodesc IS DISTINCT FROM expecteddesc
    AND oprdesc NOT LIKE 'deprecated%'
    AND prodesc IS DISTINCT FROM oprdesc;
 p_oid | proname | o_oid | prodesc | expecteddesc | oprdesc 
-------+---------+-------+---------+--------------+---------
(0 rows)

-- Show all the operator-implementation functions that have their own
-- comments.  This should happen only in cases where the function and
-- operator syntaxes are both documented at the user level.
-- This should be a pretty short list; it's mostly legacy cases.
WITH funcdescs AS (
  SELECT p.oid as p_oid, proname, o.oid as o_oid,
    pd.description as prodesc,
    'implementation of ' || oprname || ' operator' as expecteddesc,
    od.description as oprdesc
  FROM pg_proc p JOIN pg_operator o ON oprcode = p.oid
       LEFT JOIN pg_description pd ON
         (pd.objoid = p.oid and pd.classoid = p.tableoid and pd.objsubid = 0)
       LEFT JOIN pg_description od ON
         (od.objoid = o.oid and od.classoid = o.tableoid and od.objsubid = 0)
  WHERE o.oid <= 9999
)
SELECT p_oid, proname, prodesc FROM funcdescs
  WHERE prodesc IS DISTINCT FROM expecteddesc
    AND oprdesc NOT LIKE 'deprecated%'
ORDER BY 1;
 p_oid |         proname         |                     prodesc                     
-------+-------------------------+-------------------------------------------------
   378 | array_append            | append element onto end of array
   379 | array_prepend           | prepend element onto front of array
  1035 | aclinsert               | add/update ACL item
  1036 | aclremove               | remove ACL item
  1037 | aclcontains             | contains
  3217 | jsonb_extract_path      | get value from jsonb with path elements
  3940 | jsonb_extract_path_text | get value from jsonb as text with path elements
  3951 | json_extract_path       | get value from json with path elements
  3953 | json_extract_path_text  | get value from json as text with path elements
(9 rows)

-- Operators that are commutator pairs should have identical volatility
-- and leakproofness markings on their implementation functions.
SELECT o1.oid, o1.oprcode, o2.oid, o2.oprcode
FROM pg_operator AS o1, pg_operator AS o2, pg_proc AS p1, pg_proc AS p2
WHERE o1.oprcom = o2.oid AND p1.oid = o1.oprcode AND p2.oid = o2.oprcode AND
    (p1.provolatile != p2.provolatile OR
     p1.proleakproof != p2.proleakproof);
 oid | oprcode | oid | oprcode 
-----+---------+-----+---------
(0 rows)

-- Likewise for negator pairs.
SELECT o1.oid, o1.oprcode, o2.oid, o2.oprcode
FROM pg_operator AS o1, pg_operator AS o2, pg_proc AS p1, pg_proc AS p2
WHERE o1.oprnegate = o2.oid AND p1.oid = o1.oprcode AND p2.oid = o2.oprcode AND
    (p1.provolatile != p2.provolatile OR
     p1.proleakproof != p2.proleakproof);
 oid | oprcode | oid | oprcode 
-----+---------+-----+---------
(0 rows)

-- Btree comparison operators' functions should have the same volatility
-- and leakproofness markings as the associated comparison support function.
SELECT pp.oid::regprocedure as proc, pp.provolatile as vp, pp.proleakproof as lp,
       po.oid::regprocedure as opr, po.provolatile as vo, po.proleakproof as lo
FROM pg_proc pp, pg_proc po, pg_operator o, pg_amproc ap, pg_amop ao
WHERE pp.oid = ap.amproc AND po.oid = o.oprcode AND o.oid = ao.amopopr AND
    ao.amopmethod = (SELECT oid FROM pg_am WHERE amname = 'btree') AND
    ao.amopfamily = ap.amprocfamily AND
    ao.amoplefttype = ap.amproclefttype AND
    ao.amoprighttype = ap.amprocrighttype AND
    ap.amprocnum = 1 AND
    (pp.provolatile != po.provolatile OR
     pp.proleakproof != po.proleakproof)
ORDER BY 1;
 proc | vp | lp | opr | vo | lo 
------+----+----+-----+----+----
(0 rows)

-- **************** pg_aggregate ****************
-- Look for illegal values in pg_aggregate fields.
SELECT ctid, aggfnoid::oid
FROM pg_aggregate as a
WHERE aggfnoid = 0 OR aggtransfn = 0 OR
    aggkind NOT IN ('n', 'o', 'h') OR
    aggnumdirectargs < 0 OR
    (aggkind = 'n' AND aggnumdirectargs > 0) OR
    aggfinalmodify NOT IN ('r', 's', 'w') OR
    aggmfinalmodify NOT IN ('r', 's', 'w') OR
    aggtranstype = 0 OR aggtransspace < 0 OR aggmtransspace < 0;
 ctid | aggfnoid 
------+----------
(0 rows)

-- Make sure the matching pg_proc entry is sensible, too.
SELECT a.aggfnoid::oid, p.proname
FROM pg_aggregate as a, pg_proc as p
WHERE a.aggfnoid = p.oid AND
    (p.prokind != 'a' OR p.proretset OR p.pronargs < a.aggnumdirectargs);
 aggfnoid | proname 
----------+---------
(0 rows)

-- Make sure there are no prokind = PROKIND_AGGREGATE pg_proc entries without matches.
SELECT oid, proname
FROM pg_proc as p
WHERE p.prokind = 'a' AND
    NOT EXISTS (SELECT 1 FROM pg_aggregate a WHERE a.aggfnoid = p.oid);
 oid | proname 
-----+---------
(0 rows)

-- If there is no finalfn then the output type must be the transtype.
SELECT a.aggfnoid::oid, p.proname
FROM pg_aggregate as a, pg_proc as p
WHERE a.aggfnoid = p.oid AND
    a.aggfinalfn = 0 AND p.prorettype != a.aggtranstype;
 aggfnoid | proname 
----------+---------
(0 rows)

-- Cross-check transfn against its entry in pg_proc.
SELECT a.aggfnoid::oid, p.proname, ptr.oid, ptr.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS ptr
WHERE a.aggfnoid = p.oid AND
    a.aggtransfn = ptr.oid AND
    (ptr.proretset
     OR NOT (ptr.pronargs =
             CASE WHEN a.aggkind = 'n' THEN p.pronargs + 1
             ELSE greatest(p.pronargs - a.aggnumdirectargs, 1) + 1 END)
     OR NOT binary_coercible(ptr.prorettype, a.aggtranstype)
     OR NOT binary_coercible(a.aggtranstype, ptr.proargtypes[0])
     OR (p.pronargs > 0 AND
         NOT binary_coercible(p.proargtypes[0], ptr.proargtypes[1]))
     OR (p.pronargs > 1 AND
         NOT binary_coercible(p.proargtypes[1], ptr.proargtypes[2]))
     OR (p.pronargs > 2 AND
         NOT binary_coercible(p.proargtypes[2], ptr.proargtypes[3]))
     -- we could carry the check further, but 3 args is enough for now
     OR (p.pronargs > 3)
    );
 aggfnoid | proname | oid | proname 
----------+---------+-----+---------
(0 rows)

-- Cross-check finalfn (if present) against its entry in pg_proc.
SELECT a.aggfnoid::oid, p.proname, pfn.oid, pfn.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS pfn
WHERE a.aggfnoid = p.oid AND
    a.aggfinalfn = pfn.oid AND
    (pfn.proretset OR
     NOT binary_coercible(pfn.prorettype, p.prorettype) OR
     NOT binary_coercible(a.aggtranstype, pfn.proargtypes[0]) OR
     CASE WHEN a.aggfinalextra THEN pfn.pronargs != p.pronargs + 1
          ELSE pfn.pronargs != a.aggnumdirectargs + 1 END
     OR (pfn.pronargs > 1 AND
         NOT binary_coercible(p.proargtypes[0], pfn.proargtypes[1]))
     OR (pfn.pronargs > 2 AND
         NOT binary_coercible(p.proargtypes[1], pfn.proargtypes[2]))
     OR (pfn.pronargs > 3 AND
         NOT binary_coercible(p.proargtypes[2], pfn.proargtypes[3]))
     -- we could carry the check further, but 4 args is enough for now
     OR (pfn.pronargs > 4)
    );
 aggfnoid | proname | oid | proname 
----------+---------+-----+---------
(0 rows)

-- If transfn is strict then either initval should be non-NULL, or
-- input type should match transtype so that the first non-null input
-- can be assigned as the state value.
SELECT a.aggfnoid::oid, p.proname, ptr.oid, ptr.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS ptr
WHERE a.aggfnoid = p.oid AND
    a.aggtransfn = ptr.oid AND ptr.proisstrict AND
    a.agginitval IS NULL AND
    NOT binary_coercible(p.proargtypes[0], a.aggtranstype);
 aggfnoid | proname | oid | proname 
----------+---------+-----+---------
(0 rows)

-- Check for inconsistent specifications of moving-aggregate columns.
SELECT ctid, aggfnoid::oid
FROM pg_aggregate as a
WHERE aggmtranstype != 0 AND
    (aggmtransfn = 0 OR aggminvtransfn = 0);
 ctid | aggfnoid 
------+----------
(0 rows)

SELECT ctid, aggfnoid::oid
FROM pg_aggregate as a
WHERE aggmtranstype = 0 AND
    (aggmtransfn != 0 OR aggminvtransfn != 0 OR aggmfinalfn != 0 OR
     aggmtransspace != 0 OR aggminitval IS NOT NULL);
 ctid | aggfnoid 
------+----------
(0 rows)

-- If there is no mfinalfn then the output type must be the mtranstype.
SELECT a.aggfnoid::oid, p.proname
FROM pg_aggregate as a, pg_proc as p
WHERE a.aggfnoid = p.oid AND
    a.aggmtransfn != 0 AND
    a.aggmfinalfn = 0 AND p.prorettype != a.aggmtranstype;
 aggfnoid | proname 
----------+---------
(0 rows)

-- Cross-check mtransfn (if present) against its entry in pg_proc.
SELECT a.aggfnoid::oid, p.proname, ptr.oid, ptr.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS ptr
WHERE a.aggfnoid = p.oid AND
    a.aggmtransfn = ptr.oid AND
    (ptr.proretset
     OR NOT (ptr.pronargs =
             CASE WHEN a.aggkind = 'n' THEN p.pronargs + 1
             ELSE greatest(p.pronargs - a.aggnumdirectargs, 1) + 1 END)
     OR NOT binary_coercible(ptr.prorettype, a.aggmtranstype)
     OR NOT binary_coercible(a.aggmtranstype, ptr.proargtypes[0])
     OR (p.pronargs > 0 AND
         NOT binary_coercible(p.proargtypes[0], ptr.proargtypes[1]))
     OR (p.pronargs > 1 AND
         NOT binary_coercible(p.proargtypes[1], ptr.proargtypes[2]))
     OR (p.pronargs > 2 AND
         NOT binary_coercible(p.proargtypes[2], ptr.proargtypes[3]))
     -- we could carry the check further, but 3 args is enough for now
     OR (p.pronargs > 3)
    );
 aggfnoid | proname | oid | proname 
----------+---------+-----+---------
(0 rows)

-- Cross-check minvtransfn (if present) against its entry in pg_proc.
SELECT a.aggfnoid::oid, p.proname, ptr.oid, ptr.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS ptr
WHERE a.aggfnoid = p.oid AND
    a.aggminvtransfn = ptr.oid AND
    (ptr.proretset
     OR NOT (ptr.pronargs =
             CASE WHEN a.aggkind = 'n' THEN p.pronargs + 1
             ELSE greatest(p.pronargs - a.aggnumdirectargs, 1) + 1 END)
     OR NOT binary_coercible(ptr.prorettype, a.aggmtranstype)
     OR NOT binary_coercible(a.aggmtranstype, ptr.proargtypes[0])
     OR (p.pronargs > 0 AND
         NOT binary_coercible(p.proargtypes[0], ptr.proargtypes[1]))
     OR (p.pronargs > 1 AND
         NOT binary_coercible(p.proargtypes[1], ptr.proargtypes[2]))
     OR (p.pronargs > 2 AND
         NOT binary_coercible(p.proargtypes[2], ptr.proargtypes[3]))
     -- we could carry the check further, but 3 args is enough for now
     OR (p.pronargs > 3)
    );
 aggfnoid | proname | oid | proname 
----------+---------+-----+---------
(0 rows)

-- Cross-check mfinalfn (if present) against its entry in pg_proc.
SELECT a.aggfnoid::oid, p.proname, pfn.oid, pfn.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS pfn
WHERE a.aggfnoid = p.oid AND
    a.aggmfinalfn = pfn.oid AND
    (pfn.proretset OR
     NOT binary_coercible(pfn.prorettype, p.prorettype) OR
     NOT binary_coercible(a.aggmtranstype, pfn.proargtypes[0]) OR
     CASE WHEN a.aggmfinalextra THEN pfn.pronargs != p.pronargs + 1
          ELSE pfn.pronargs != a.aggnumdirectargs + 1 END
     OR (pfn.pronargs > 1 AND
         NOT binary_coercible(p.proargtypes[0], pfn.proargtypes[1]))
     OR (pfn.pronargs > 2 AND
         NOT binary_coercible(p.proargtypes[1], pfn.proargtypes[2]))
     OR (pfn.pronargs > 3 AND
         NOT binary_coercible(p.proargtypes[2], pfn.proargtypes[3]))
     -- we could carry the check further, but 4 args is enough for now
     OR (pfn.pronargs > 4)
    );
 aggfnoid | proname | oid | proname 
----------+---------+-----+---------
(0 rows)

-- If mtransfn is strict then either minitval should be non-NULL, or
-- input type should match mtranstype so that the first non-null input
-- can be assigned as the state value.
SELECT a.aggfnoid::oid, p.proname, ptr.oid, ptr.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS ptr
WHERE a.aggfnoid = p.oid AND
    a.aggmtransfn = ptr.oid AND ptr.proisstrict AND
    a.aggminitval IS NULL AND
    NOT binary_coercible(p.proargtypes[0], a.aggmtranstype);
 aggfnoid | proname | oid | proname 
----------+---------+-----+---------
(0 rows)

-- mtransfn and minvtransfn should have same strictness setting.
SELECT a.aggfnoid::oid, p.proname, ptr.oid, ptr.proname, iptr.oid, iptr.proname
FROM pg_aggregate AS a, pg_proc AS p, pg_proc AS ptr, pg_proc AS iptr
WHERE a.aggfnoid = p.oid AND
    a.aggmtransfn = ptr.oid AND
    a.aggminvtransfn = iptr.oid AND
    ptr.proisstrict != iptr.proisstrict;
 aggfnoid | proname | oid | proname | oid | proname 
----------+---------+-----+---------+-----+---------
(0 rows)

-- Check that all combine functions have signature
-- combine(transtype, transtype) returns transtype
SELECT a.aggfnoid, p.proname
FROM pg_aggregate as a, pg_proc as p
WHERE a.aggcombinefn = p.oid AND
    (p.pronargs != 2 OR
     p.prorettype != p.proargtypes[0] OR
     p.prorettype != p.proargtypes[1] OR
     NOT binary_coercible(a.aggtranstype, p.proargtypes[0]));
 aggfnoid | proname 
----------+---------
(0 rows)

-- Check that no combine function for an INTERNAL transtype is strict.
SELECT a.aggfnoid, p.proname
FROM pg_aggregate as a, pg_proc as p
WHERE a.aggcombinefn = p.oid AND
    a.aggtranstype = 'internal'::regtype AND p.proisstrict;
 aggfnoid | proname 
----------+---------
(0 rows)

-- serialize/deserialize functions should be specified only for aggregates
-- with transtype internal and a combine function, and we should have both
-- or neither of them.
SELECT aggfnoid, aggtranstype, aggserialfn, aggdeserialfn
FROM pg_aggregate
WHERE (aggserialfn != 0 OR aggdeserialfn != 0)
  AND (aggtranstype != 'internal'::regtype OR aggcombinefn = 0 OR
       aggserialfn = 0 OR aggdeserialfn = 0);
 aggfnoid | aggtranstype | aggserialfn | aggdeserialfn 
----------+--------------+-------------+---------------
(0 rows)

-- Check that all serialization functions have signature
-- serialize(internal) returns bytea
-- Also insist that they be strict; it's wasteful to run them on NULLs.
SELECT a.aggfnoid, p.proname
FROM pg_aggregate as a, pg_proc as p
WHERE a.aggserialfn = p.oid AND
    (p.prorettype != 'bytea'::regtype OR p.pronargs != 1 OR
     p.proargtypes[0] != 'internal'::regtype OR
     NOT p.proisstrict);
 aggfnoid | proname 
----------+---------
(0 rows)

-- Check that all deserialization functions have signature
-- deserialize(bytea, internal) returns internal
-- Also insist that they be strict; it's wasteful to run them on NULLs.
SELECT a.aggfnoid, p.proname
FROM pg_aggregate as a, pg_proc as p
WHERE a.aggdeserialfn = p.oid AND
    (p.prorettype != 'internal'::regtype OR p.pronargs != 2 OR
     p.proargtypes[0] != 'bytea'::regtype OR
     p.proargtypes[1] != 'internal'::regtype OR
     NOT p.proisstrict);
 aggfnoid | proname 
----------+---------
(0 rows)

-- Check that aggregates which have the same transition function also have
-- the same combine, serialization, and deserialization functions.
-- While that isn't strictly necessary, it's fishy if they don't.
SELECT a.aggfnoid, a.aggcombinefn, a.aggserialfn, a.aggdeserialfn,
       b.aggfnoid, b.aggcombinefn, b.aggserialfn, b.aggdeserialfn
FROM
    pg_aggregate a, pg_aggregate b
WHERE
    a.aggfnoid < b.aggfnoid AND a.aggtransfn = b.aggtransfn AND
    (a.aggcombinefn != b.aggcombinefn OR a.aggserialfn != b.aggserialfn
     OR a.aggdeserialfn != b.aggdeserialfn);
 aggfnoid | aggcombinefn | aggserialfn | aggdeserialfn | aggfnoid | aggcombinefn | aggserialfn | aggdeserialfn 
----------+--------------+-------------+---------------+----------+--------------+-------------+---------------
(0 rows)

-- Cross-check aggsortop (if present) against pg_operator.
-- We expect to find entries for bool_and, bool_or, every, max, and min.
SELECT DISTINCT proname, oprname
FROM pg_operator AS o, pg_aggregate AS a, pg_proc AS p
WHERE a.aggfnoid = p.oid AND a.aggsortop = o.oid
ORDER BY 1, 2;
 proname  | oprname 
----------+---------
 bool_and | <
 bool_or  | >
 every    | <
 max      | >
 min      | <
(5 rows)

-- Check datatypes match
SELECT a.aggfnoid::oid, o.oid
FROM pg_operator AS o, pg_aggregate AS a, pg_proc AS p
WHERE a.aggfnoid = p.oid AND a.aggsortop = o.oid AND
    (oprkind != 'b' OR oprresult != 'boolean'::regtype
     OR oprleft != p.proargtypes[0] OR oprright != p.proargtypes[0]);
 aggfnoid | oid 
----------+-----
(0 rows)

-- Check operator is a suitable btree opfamily member
SELECT a.aggfnoid::oid, o.oid
FROM pg_operator AS o, pg_aggregate AS a, pg_proc AS p
WHERE a.aggfnoid = p.oid AND a.aggsortop = o.oid AND
    NOT EXISTS(SELECT 1 FROM pg_amop
               WHERE amopmethod = (SELECT oid FROM pg_am WHERE amname = 'btree')
                     AND amopopr = o.oid
                     AND amoplefttype = o.oprleft
                     AND amoprighttype = o.oprright);
 aggfnoid | oid 
----------+-----
(0 rows)

-- Check correspondence of btree strategies and names
SELECT DISTINCT proname, oprname, amopstrategy
FROM pg_operator AS o, pg_aggregate AS a, pg_proc AS p,
     pg_amop as ao
WHERE a.aggfnoid = p.oid AND a.aggsortop = o.oid AND
    amopopr = o.oid AND
    amopmethod = (SELECT oid FROM pg_am WHERE amname = 'btree')
ORDER BY 1, 2;
 proname  | oprname | amopstrategy 
----------+---------+--------------
 bool_and | <       |            1
 bool_or  | >       |            5
 every    | <       |            1
 max      | >       |            5
 min      | <       |            1
(5 rows)

-- Check that there are not aggregates with the same name and different
-- numbers of arguments.  While not technically wrong, we have a project policy
-- to avoid this because it opens the door for confusion in connection with
-- ORDER BY: novices frequently put the ORDER BY in the wrong place.
-- See the fate of the single-argument form of string_agg() for history.
-- (Note: we don't forbid users from creating such aggregates; the policy is
-- just to think twice before creating built-in aggregates like this.)
-- The only aggregates that should show up here are count(x) and count(*).
SELECT p1.oid::regprocedure, p2.oid::regprocedure
FROM pg_proc AS p1, pg_proc AS p2
WHERE p1.oid < p2.oid AND p1.proname = p2.proname AND
    p1.prokind = 'a' AND p2.prokind = 'a' AND
    array_dims(p1.proargtypes) != array_dims(p2.proargtypes)
ORDER BY 1;
     oid      |   oid   
--------------+---------
 count("any") | count()
(1 row)

-- For the same reason, built-in aggregates with default arguments are no good.
SELECT oid, proname
FROM pg_proc AS p
WHERE prokind = 'a' AND proargdefaults IS NOT NULL;
 oid | proname 
-----+---------
(0 rows)

-- For the same reason, we avoid creating built-in variadic aggregates, except
-- that variadic ordered-set aggregates are OK (since they have special syntax
-- that is not subject to the misplaced ORDER BY issue).
SELECT p.oid, proname
FROM pg_proc AS p JOIN pg_aggregate AS a ON a.aggfnoid = p.oid
WHERE prokind = 'a' AND provariadic != 0 AND a.aggkind = 'n';
 oid | proname 
-----+---------
(0 rows)

-- **************** pg_opfamily ****************
-- Look for illegal values in pg_opfamily fields
SELECT f.oid
FROM pg_opfamily as f
WHERE f.opfmethod = 0 OR f.opfnamespace = 0;
 oid 
-----
(0 rows)

-- Look for opfamilies having no opclasses.  While most validation of
-- opfamilies is now handled by AM-specific amvalidate functions, that's
-- driven from pg_opclass entries below, so an empty opfamily would not
-- get noticed.
SELECT oid, opfname FROM pg_opfamily f
WHERE NOT EXISTS (SELECT 1 FROM pg_opclass WHERE opcfamily = f.oid);
 oid | opfname 
-----+---------
(0 rows)

-- **************** pg_opclass ****************
-- Look for illegal values in pg_opclass fields
SELECT c1.oid
FROM pg_opclass AS c1
WHERE c1.opcmethod = 0 OR c1.opcnamespace = 0 OR c1.opcfamily = 0
    OR c1.opcintype = 0;
 oid 
-----
(0 rows)

-- opcmethod must match owning opfamily's opfmethod
SELECT c1.oid, f1.oid
FROM pg_opclass AS c1, pg_opfamily AS f1
WHERE c1.opcfamily = f1.oid AND c1.opcmethod != f1.opfmethod;
 oid | oid 
-----+-----
(0 rows)

-- There should not be multiple entries in pg_opclass with opcdefault true
-- and the same opcmethod/opcintype combination.
SELECT c1.oid, c2.oid
FROM pg_opclass AS c1, pg_opclass AS c2
WHERE c1.oid != c2.oid AND
    c1.opcmethod = c2.opcmethod AND c1.opcintype = c2.opcintype AND
    c1.opcdefault AND c2.opcdefault;
 oid | oid 
-----+-----
(0 rows)

-- Ask access methods to validate opclasses
-- (this replaces a lot of SQL-level checks that used to be done in this file)
SELECT oid, opcname FROM pg_opclass WHERE NOT amvalidate(oid);
 oid | opcname 
-----+---------
(0 rows)

-- **************** pg_am ****************
-- Look for illegal values in pg_am fields
SELECT a1.oid, a1.amname
FROM pg_am AS a1
WHERE a1.amhandler = 0;
 oid | amname 
-----+--------
(0 rows)

-- Check for index amhandler functions with the wrong signature
SELECT a1.oid, a1.amname, p1.oid, p1.proname
FROM pg_am AS a1, pg_proc AS p1
WHERE p1.oid = a1.amhandler AND a1.amtype = 'i' AND
    (p1.prorettype != 'index_am_handler'::regtype
     OR p1.proretset
     OR p1.pronargs != 1
     OR p1.proargtypes[0] != 'internal'::regtype);
 oid | amname | oid | proname 
-----+--------+-----+---------
(0 rows)

-- Check for table amhandler functions with the wrong signature
SELECT a1.oid, a1.amname, p1.oid, p1.proname
FROM pg_am AS a1, pg_proc AS p1
WHERE p1.oid = a1.amhandler AND a1.amtype = 't' AND
    (p1.prorettype != 'table_am_handler'::regtype
     OR p1.proretset
     OR p1.pronargs != 1
     OR p1.proargtypes[0] != 'internal'::regtype);
 oid | amname | oid | proname 
-----+--------+-----+---------
(0 rows)

-- **************** pg_amop ****************
-- Look for illegal values in pg_amop fields
SELECT a1.amopfamily, a1.amopstrategy
FROM pg_amop as a1
WHERE a1.amopfamily = 0 OR a1.amoplefttype = 0 OR a1.amoprighttype = 0
    OR a1.amopopr = 0 OR a1.amopmethod = 0 OR a1.amopstrategy < 1;
 amopfamily | amopstrategy 
------------+--------------
(0 rows)

SELECT a1.amopfamily, a1.amopstrategy
FROM pg_amop as a1
WHERE NOT ((a1.amoppurpose = 's' AND a1.amopsortfamily = 0) OR
           (a1.amoppurpose = 'o' AND a1.amopsortfamily <> 0));
 amopfamily | amopstrategy 
------------+--------------
(0 rows)

-- amopmethod must match owning opfamily's opfmethod
SELECT a1.oid, f1.oid
FROM pg_amop AS a1, pg_opfamily AS f1
WHERE a1.amopfamily = f1.oid AND a1.amopmethod != f1.opfmethod;
 oid | oid 
-----+-----
(0 rows)

-- Make a list of all the distinct operator names being used in particular
-- strategy slots.  This is a bit hokey, since the list might need to change
-- in future releases, but it's an effective way of spotting mistakes such as
-- swapping two operators within a family.
SELECT DISTINCT amopmethod, amopstrategy, oprname
FROM pg_amop a1 LEFT JOIN pg_operator o1 ON amopopr = o1.oid
ORDER BY 1, 2, 3;
 amopmethod | amopstrategy | oprname 
------------+--------------+---------
        403 |            1 | *<
        403 |            1 | <
        403 |            1 | ~<~
        403 |            2 | *<=
        403 |            2 | <=
        403 |            2 | ~<=~
        403 |            3 | *=
        403 |            3 | =
        403 |            4 | *>=
        403 |            4 | >=
        403 |            4 | ~>=~
        403 |            5 | *>
        403 |            5 | >
        403 |            5 | ~>~
        405 |            1 | =
        783 |            1 | <<
        783 |            1 | @@
        783 |            2 | &<
        783 |            3 | &&
        783 |            4 | &>
        783 |            5 | >>
        783 |            6 | -|-
        783 |            6 | ~=
        783 |            7 | @>
        783 |            8 | <@
        783 |            9 | &<|
        783 |           10 | <<|
        783 |           11 | |>>
        783 |           12 | |&>
        783 |           15 | <->
        783 |           16 | @>
        783 |           18 | =
        783 |           19 | <>
        783 |           20 | <
        783 |           21 | <=
        783 |           22 | >
        783 |           23 | >=
        783 |           24 | <<
        783 |           25 | <<=
        783 |           26 | >>
        783 |           27 | >>=
        783 |           28 | <@
        783 |           29 | <^
        783 |           30 | >^
        783 |           48 | <@
        783 |           68 | <@
       2742 |            1 | &&
       2742 |            1 | @@
       2742 |            2 | @>
       2742 |            2 | @@@
       2742 |            3 | <@
       2742 |            4 | =
       2742 |            7 | @>
       2742 |            9 | ?
       2742 |           10 | ?|
       2742 |           11 | ?&
       2742 |           15 | @?
       2742 |           16 | @@
       3580 |            1 | <
       3580 |            1 | <<
       3580 |            1 | =
       3580 |            2 | &<
       3580 |            2 | <=
       3580 |            3 | &&
       3580 |            3 | =
       3580 |            4 | &>
       3580 |            4 | >=
       3580 |            5 | >
       3580 |            5 | >>
       3580 |            6 | ~=
       3580 |            7 | >>=
       3580 |            7 | @>
       3580 |            8 | <<=
       3580 |            8 | <@
       3580 |            9 | &<|
       3580 |           10 | <<|
       3580 |           11 | |>>
       3580 |           12 | |&>
       3580 |           16 | @>
       3580 |           17 | -|-
       3580 |           18 | =
       3580 |           20 | <
       3580 |           21 | <=
       3580 |           22 | >
       3580 |           23 | >=
       3580 |           24 | >>
       3580 |           26 | <<
       4000 |            1 | <<
       4000 |            1 | ~<~
       4000 |            2 | &<
       4000 |            2 | ~<=~
       4000 |            3 | &&
       4000 |            3 | =
       4000 |            4 | &>
       4000 |            4 | ~>=~
       4000 |            5 | >>
       4000 |            5 | ~>~
       4000 |            6 | -|-
       4000 |            6 | ~=
       4000 |            7 | @>
       4000 |            8 | <@
       4000 |            9 | &<|
       4000 |           10 | <<|
       4000 |           11 | <
       4000 |           11 | |>>
       4000 |           12 | <=
       4000 |           12 | |&>
       4000 |           14 | >=
       4000 |           15 | <->
       4000 |           15 | >
       4000 |           16 | @>
       4000 |           18 | =
       4000 |           19 | <>
       4000 |           20 | <
       4000 |           21 | <=
       4000 |           22 | >
       4000 |           23 | >=
       4000 |           24 | <<
       4000 |           25 | <<=
       4000 |           26 | >>
       4000 |           27 | >>=
       4000 |           28 | ^@
       4000 |           29 | <^
       4000 |           30 | >^
(124 rows)

-- Check that all opclass search operators have selectivity estimators.
-- This is not absolutely required, but it seems a reasonable thing
-- to insist on for all standard datatypes.
SELECT a1.amopfamily, a1.amopopr, o1.oid, o1.oprname
FROM pg_amop AS a1, pg_operator AS o1
WHERE a1.amopopr = o1.oid AND a1.amoppurpose = 's' AND
    (o1.oprrest = 0 OR o1.oprjoin = 0);
 amopfamily | amopopr | oid | oprname 
------------+---------+-----+---------
(0 rows)

-- Check that each opclass in an opfamily has associated operators, that is
-- ones whose oprleft matches opcintype (possibly by coercion).
SELECT c1.opcname, c1.opcfamily
FROM pg_opclass AS c1
WHERE NOT EXISTS(SELECT 1 FROM pg_amop AS a1
                 WHERE a1.amopfamily = c1.opcfamily
                   AND binary_coercible(c1.opcintype, a1.amoplefttype));
 opcname | opcfamily 
---------+-----------
(0 rows)

-- Check that each operator listed in pg_amop has an associated opclass,
-- that is one whose opcintype matches oprleft (possibly by coercion).
-- Otherwise the operator is useless because it cannot be matched to an index.
-- (In principle it could be useful to list such operators in multiple-datatype
-- btree opfamilies, but in practice you'd expect there to be an opclass for
-- every datatype the family knows about.)
SELECT a1.amopfamily, a1.amopstrategy, a1.amopopr
FROM pg_amop AS a1
WHERE NOT EXISTS(SELECT 1 FROM pg_opclass AS c1
                 WHERE c1.opcfamily = a1.amopfamily
                   AND binary_coercible(c1.opcintype, a1.amoplefttype));
 amopfamily | amopstrategy | amopopr 
------------+--------------+---------
(0 rows)

-- Operators that are primary members of opclasses must be immutable (else
-- it suggests that the index ordering isn't fixed).  Operators that are
-- cross-type members need only be stable, since they are just shorthands
-- for index probe queries.
SELECT a1.amopfamily, a1.amopopr, o1.oprname, p1.prosrc
FROM pg_amop AS a1, pg_operator AS o1, pg_proc AS p1
WHERE a1.amopopr = o1.oid AND o1.oprcode = p1.oid AND
    a1.amoplefttype = a1.amoprighttype AND
    p1.provolatile != 'i';
 amopfamily | amopopr | oprname | prosrc 
------------+---------+---------+--------
(0 rows)

SELECT a1.amopfamily, a1.amopopr, o1.oprname, p1.prosrc
FROM pg_amop AS a1, pg_operator AS o1, pg_proc AS p1
WHERE a1.amopopr = o1.oid AND o1.oprcode = p1.oid AND
    a1.amoplefttype != a1.amoprighttype AND
    p1.provolatile = 'v';
 amopfamily | amopopr | oprname | prosrc 
------------+---------+---------+--------
(0 rows)

-- **************** pg_amproc ****************
-- Look for illegal values in pg_amproc fields
SELECT a1.amprocfamily, a1.amprocnum
FROM pg_amproc as a1
WHERE a1.amprocfamily = 0 OR a1.amproclefttype = 0 OR a1.amprocrighttype = 0
    OR a1.amprocnum < 0 OR a1.amproc = 0;
 amprocfamily | amprocnum 
--------------+-----------
(0 rows)

-- Support routines that are primary members of opfamilies must be immutable
-- (else it suggests that the index ordering isn't fixed).  But cross-type
-- members need only be stable, since they are just shorthands
-- for index probe queries.
SELECT a1.amprocfamily, a1.amproc, p1.prosrc
FROM pg_amproc AS a1, pg_proc AS p1
WHERE a1.amproc = p1.oid AND
    a1.amproclefttype = a1.amprocrighttype AND
    p1.provolatile != 'i';
 amprocfamily | amproc | prosrc 
--------------+--------+--------
(0 rows)

SELECT a1.amprocfamily, a1.amproc, p1.prosrc
FROM pg_amproc AS a1, pg_proc AS p1
WHERE a1.amproc = p1.oid AND
    a1.amproclefttype != a1.amprocrighttype AND
    p1.provolatile = 'v';
 amprocfamily | amproc | prosrc 
--------------+--------+--------
(0 rows)

-- Almost all of the core distribution's Btree opclasses can use one of the
-- two generic "equalimage" functions as their support function 4.  Look for
-- opclasses that don't allow deduplication unconditionally here.
--
-- Newly added Btree opclasses don't have to support deduplication.  It will
-- usually be trivial to add support, though.  Note that the expected output
-- of this part of the test will need to be updated when a new opclass cannot
-- support deduplication (by using btequalimage).
SELECT amp.amproc::regproc AS proc, opf.opfname AS opfamily_name,
       opc.opcname AS opclass_name, opc.opcintype::regtype AS opcintype
FROM pg_am AS am
JOIN pg_opclass AS opc ON opc.opcmethod = am.oid
JOIN pg_opfamily AS opf ON opc.opcfamily = opf.oid
LEFT JOIN pg_amproc AS amp ON amp.amprocfamily = opf.oid AND
    amp.amproclefttype = opc.opcintype AND amp.amprocnum = 4
WHERE am.amname = 'btree' AND
    amp.amproc IS DISTINCT FROM 'btequalimage'::regproc
ORDER BY 1, 2, 3;
        proc        |  opfamily_name   |   opclass_name   |    opcintype     
--------------------+------------------+------------------+------------------
 btvarstrequalimage | bpchar_ops       | bpchar_ops       | character
 btvarstrequalimage | text_ops         | name_ops         | name
 btvarstrequalimage | text_ops         | text_ops         | text
 btvarstrequalimage | text_ops         | varchar_ops      | text
                    | array_ops        | array_ops        | anyarray
                    | float_ops        | float4_ops       | real
                    | float_ops        | float8_ops       | double precision
                    | interval_ops     | interval_ops     | interval
                    | jsonb_ops        | jsonb_ops        | jsonb
                    | multirange_ops   | multirange_ops   | anymultirange
                    | numeric_ops      | numeric_ops      | numeric
                    | range_ops        | range_ops        | anyrange
                    | record_image_ops | record_image_ops | record
                    | record_ops       | record_ops       | record
                    | tsquery_ops      | tsquery_ops      | tsquery
                    | tsvector_ops     | tsvector_ops     | tsvector
(16 rows)

-- **************** pg_index ****************
-- Look for illegal values in pg_index fields.
SELECT indexrelid, indrelid
FROM pg_index
WHERE indexrelid = 0 OR indrelid = 0 OR
      indnatts <= 0 OR indnatts > 32;
 indexrelid | indrelid 
------------+----------
(0 rows)

-- oidvector and int2vector fields should be of length indnatts.
SELECT indexrelid, indrelid
FROM pg_index
WHERE array_lower(indkey, 1) != 0 OR array_upper(indkey, 1) != indnatts-1 OR
    array_lower(indclass, 1) != 0 OR array_upper(indclass, 1) != indnatts-1 OR
    array_lower(indcollation, 1) != 0 OR array_upper(indcollation, 1) != indnatts-1 OR
    array_lower(indoption, 1) != 0 OR array_upper(indoption, 1) != indnatts-1;
 indexrelid | indrelid 
------------+----------
(0 rows)

-- Check that opclasses and collations match the underlying columns.
-- (As written, this test ignores expression indexes.)
SELECT indexrelid::regclass, indrelid::regclass, attname, atttypid::regtype, opcname
FROM (SELECT indexrelid, indrelid, unnest(indkey) as ikey,
             unnest(indclass) as iclass, unnest(indcollation) as icoll
      FROM pg_index) ss,
      pg_attribute a,
      pg_opclass opc
WHERE a.attrelid = indrelid AND a.attnum = ikey AND opc.oid = iclass AND
      (NOT binary_coercible(atttypid, opcintype) OR icoll != attcollation);
 indexrelid | indrelid | attname | atttypid | opcname 
------------+----------+---------+----------+---------
(0 rows)

-- For system catalogs, be even tighter: nearly all indexes should be
-- exact type matches not binary-coercible matches.  At this writing
-- the only exception is an OID index on a regproc column.
SELECT indexrelid::regclass, indrelid::regclass, attname, atttypid::regtype, opcname
FROM (SELECT indexrelid, indrelid, unnest(indkey) as ikey,
             unnest(indclass) as iclass, unnest(indcollation) as icoll
      FROM pg_index
      WHERE indrelid < 16384) ss,
      pg_attribute a,
      pg_opclass opc
WHERE a.attrelid = indrelid AND a.attnum = ikey AND opc.oid = iclass AND
      (opcintype != atttypid OR icoll != attcollation)
ORDER BY 1;
        indexrelid        |   indrelid   | attname  | atttypid | opcname 
--------------------------+--------------+----------+----------+---------
 pg_aggregate_fnoid_index | pg_aggregate | aggfnoid | regproc  | oid_ops
(1 row)

-- Check for system catalogs with collation-sensitive ordering.  This is not
-- a representational error in pg_index, but simply wrong catalog design.
-- It's bad because we expect to be able to clone template0 and assign the
-- copy a different database collation.  It would especially not work for
-- shared catalogs.
SELECT relname, attname, attcollation
FROM pg_class c, pg_attribute a
WHERE c.oid = attrelid AND c.oid < 16384 AND
    c.relkind != 'v' AND  -- we don't care about columns in views
    attcollation != 0 AND
    attcollation != (SELECT oid FROM pg_collation WHERE collname = 'C');
 relname | attname | attcollation 
---------+---------+--------------
(0 rows)

-- Double-check that collation-sensitive indexes have "C" collation, too.
SELECT indexrelid::regclass, indrelid::regclass, iclass, icoll
FROM (SELECT indexrelid, indrelid,
             unnest(indclass) as iclass, unnest(indcollation) as icoll
      FROM pg_index
      WHERE indrelid < 16384) ss
WHERE icoll != 0 AND
    icoll != (SELECT oid FROM pg_collation WHERE collname = 'C');
 indexrelid | indrelid | iclass | icoll 
------------+----------+--------+-------
(0 rows)