1 files changed, 296 insertions, 0 deletions
diff --git a/tests/integration/replication-buffer.tcl b/tests/integration/replication-buffer.tcl
new file mode 100644
index 0000000..2e40248
--- /dev/null
+++ b/tests/integration/replication-buffer.tcl
@@ -0,0 +1,296 @@
+# This test group aims to test that all replicas share one global replication buffer,
+# two replicas don't make replication buffer size double, and when there is no replica,
+# replica buffer will shrink.
+start_server {tags {"repl external:skip"}} {
+start_server {} {
+start_server {} {
+start_server {} {
+    set replica1 [srv -3 client]
+    set replica2 [srv -2 client]
+    set replica3 [srv -1 client]
+
+    set master [srv 0 client]
+    set master_host [srv 0 host]
+    set master_port [srv 0 port]
+
+    $master config set save ""
+    $master config set repl-backlog-size 16384
+    $master config set repl-diskless-sync-delay 5
+    $master config set repl-diskless-sync-max-replicas 1
+    $master config set client-output-buffer-limit "replica 0 0 0"
+
+    # Make sure replica3 is synchronized with master
+    $replica3 replicaof $master_host $master_port
+    wait_for_sync $replica3
+
+    # Generating RDB will take some 100 seconds
+    $master config set rdb-key-save-delay 1000000
+    populate 100 "" 16
+
+    # Make sure replica1 and replica2 are waiting bgsave
+    $master config set repl-diskless-sync-max-replicas 2
+    $replica1 replicaof $master_host $master_port
+    $replica2 replicaof $master_host $master_port
+    wait_for_condition 50 100 {
+        ([s rdb_bgsave_in_progress] == 1) &&
+        [lindex [$replica1 role] 3] eq {sync} &&
+        [lindex [$replica2 role] 3] eq {sync}
+    } else {
+        fail "fail to sync with replicas"
+    }
+
+    test {All replicas share one global replication buffer} {
+        set before_used [s used_memory]
+        populate 1024 "" 1024 ; # Write extra 1M data
+        # New data uses 1M memory, but all replicas use only one
+        # replication buffer, so all replicas output memory is not
+        # more than double of replication buffer.
+        set repl_buf_mem [s mem_total_replication_buffers]
+        set extra_mem [expr {[s used_memory]-$before_used-1024*1024}]
+        assert {$extra_mem < 2*$repl_buf_mem}
+
+        # Kill replica1, replication_buffer will not become smaller
+        catch {$replica1 shutdown nosave}
+        wait_for_condition 50 100 {
+            [s connected_slaves] eq {2}
+        } else {
+            fail "replica doesn't disconnect with master"
+        }
+        assert_equal $repl_buf_mem [s mem_total_replication_buffers]
+    }
+
+    test {Replication buffer will become smaller when no replica uses} {
+        # Make sure replica3 catch up with the master
+        wait_for_ofs_sync $master $replica3
+
+        set repl_buf_mem [s mem_total_replication_buffers]
+        # Kill replica2, replication_buffer will become smaller
+        catch {$replica2 shutdown nosave}
+        wait_for_condition 50 100 {
+            [s connected_slaves] eq {1}
+        } else {
+            fail "replica2 doesn't disconnect with master"
+        }
+        assert {[expr $repl_buf_mem - 1024*1024] > [s mem_total_replication_buffers]}
+    }
+}
+}
+}
+}
+
+# This test group aims to test replication backlog size can outgrow the backlog
+# limit config if there is a slow replica which keep massive replication buffers,
+# and replicas could use this replication buffer (beyond backlog config) for
+# partial re-synchronization. Of course, replication backlog memory also can
+# become smaller when master disconnects with slow replicas since output buffer
+# limit is reached.
+start_server {tags {"repl external:skip"}} {
+start_server {} {
+start_server {} {
+    set replica1 [srv -2 client]
+    set replica1_pid [s -2 process_id]
+    set replica2 [srv -1 client]
+    set replica2_pid [s -1 process_id]
+
+    set master [srv 0 client]
+    set master_host [srv 0 host]
+    set master_port [srv 0 port]
+
+    $master config set save ""
+    $master config set repl-backlog-size 16384
+    $master config set client-output-buffer-limit "replica 0 0 0"
+
+    # Executing 'debug digest' on master which has many keys costs much time
+    # (especially in valgrind), this causes that replica1 and replica2 disconnect
+    # with master.
+    $master config set repl-timeout 1000
+    $replica1 config set repl-timeout 1000
+    $replica2 config set repl-timeout 1000
+
+    $replica1 replicaof $master_host $master_port
+    wait_for_sync $replica1
+
+    test {Replication backlog size can outgrow the backlog limit config} {
+        # Generating RDB will take 1000 seconds
+        $master config set rdb-key-save-delay 1000000
+        populate 1000 master 10000
+        $replica2 replicaof $master_host $master_port
+        # Make sure replica2 is waiting bgsave
+        wait_for_condition 5000 100 {
+            ([s rdb_bgsave_in_progress] == 1) &&
+            [lindex [$replica2 role] 3] eq {sync}
+        } else {
+            fail "fail to sync with replicas"
+        }
+        # Replication actual backlog grow more than backlog setting since
+        # the slow replica2 kept replication buffer.
+        populate 10000 master 10000
+        assert {[s repl_backlog_histlen] > [expr 10000*10000]}
+    }
+
+    # Wait replica1 catch up with the master
+    wait_for_condition 1000 100 {
+        [s -2 master_repl_offset] eq [s master_repl_offset]
+    } else {
+        fail "Replica offset didn't catch up with the master after too long time"
+    }
+
+    test {Replica could use replication buffer (beyond backlog config) for partial resynchronization} {
+        # replica1 disconnects with master
+        $replica1 replicaof [srv -1 host] [srv -1 port]
+        # Write a mass of data that exceeds repl-backlog-size
+        populate 10000 master 10000
+        # replica1 reconnects with master
+        $replica1 replicaof $master_host $master_port
+        wait_for_condition 1000 100 {
+            [s -2 master_repl_offset] eq [s master_repl_offset]
+        } else {
+            fail "Replica offset didn't catch up with the master after too long time"
+        }
+
+        # replica2 still waits for bgsave ending
+        assert {[s rdb_bgsave_in_progress] eq {1} && [lindex [$replica2 role] 3] eq {sync}}
+        # master accepted replica1 partial resync
+        assert_equal [s sync_partial_ok] {1}
+        assert_equal [$master debug digest] [$replica1 debug digest]
+    }
+
+    test {Replication backlog memory will become smaller if disconnecting with replica} {
+        assert {[s repl_backlog_histlen] > [expr 2*10000*10000]}
+        assert_equal [s connected_slaves] {2}
+
+        exec kill -SIGSTOP $replica2_pid
+        r config set client-output-buffer-limit "replica 128k 0 0"
+        # trigger output buffer limit check
+        r set key [string repeat A [expr 64*1024]]
+        # master will close replica2's connection since replica2's output
+        # buffer limit is reached, so there only is replica1.
+        wait_for_condition 100 100 {
+            [s connected_slaves] eq {1}
+        } else {
+            fail "master didn't disconnect with replica2"
+        }
+
+        # Since we trim replication backlog inrementally, replication backlog
+        # memory may take time to be reclaimed.
+        wait_for_condition 1000 100 {
+            [s repl_backlog_histlen] < [expr 10000*10000]
+        } else {
+            fail "Replication backlog memory is not smaller"
+        }
+        exec kill -SIGCONT $replica2_pid
+    }
+    # speed up termination
+    $master config set shutdown-timeout 0
+}
+}
+}
+
+test {Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size} {
+    start_server {tags {"repl external:skip"}} {
+        start_server {} {
+            r config set save ""
+            r config set repl-backlog-size 100mb
+            r config set client-output-buffer-limit "replica 512k 0 0"
+
+            set replica [srv -1 client]
+            $replica replicaof [srv 0 host] [srv 0 port]
+            wait_for_sync $replica
+
+            set big_str [string repeat A [expr 10*1024*1024]] ;# 10mb big string
+            r multi
+            r client kill type replica
+            r set key $big_str
+            r set key $big_str
+            r debug sleep 2 ;# wait for replica reconnecting
+            r exec
+            # When replica reconnects with master, master accepts partial resync,
+            # and don't close replica client even client output buffer limit is
+            # reached.
+            r set key $big_str ;# trigger output buffer limit check
+            wait_for_ofs_sync r $replica
+            # master accepted replica partial resync
+            assert_equal [s sync_full] {1}
+            assert_equal [s sync_partial_ok] {1}
+
+            r multi
+            r set key $big_str
+            r set key $big_str
+            r exec
+            # replica's reply buffer size is more than client-output-buffer-limit but
+            # doesn't exceed repl-backlog-size, we don't close replica client.
+            wait_for_condition 1000 100 {
+                [s -1 master_repl_offset] eq [s master_repl_offset]
+            } else {
+                fail "Replica offset didn't catch up with the master after too long time"
+            }
+            assert_equal [s sync_full] {1}
+            assert_equal [s sync_partial_ok] {1}
+        }
+    }
+}
+
+# This test was added to make sure big keys added to the backlog do not trigger psync loop.
+test {Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending} {
+    proc client_field {r type f} {
+        set client [$r client list type $type]
+        if {![regexp $f=(\[a-zA-Z0-9-\]+) $client - res]} {
+            error "field $f not found for in $client"
+        }
+        return $res
+    }
+
+    start_server {tags {"repl external:skip"}} {
+        start_server {} {
+            set replica [srv -1 client]
+            set replica_host [srv -1 host]
+            set replica_port [srv -1 port]
+            set master [srv 0 client]
+            set master_host [srv 0 host]
+            set master_port [srv 0 port]
+
+            $master config set repl-backlog-size 16384
+            $master config set client-output-buffer-limit "replica 32768 32768 60"
+            # Key has has to be larger than replica client-output-buffer limit.
+            set keysize [expr 256*1024]
+
+            $replica replicaof $master_host $master_port
+            wait_for_condition 50 100 {
+                [lindex [$replica role] 0] eq {slave} &&
+                [string match {*master_link_status:up*} [$replica info replication]]
+            } else {
+                fail "Can't turn the instance into a replica"
+            }
+
+            set _v [prepare_value $keysize]
+            $master set key $_v
+            wait_for_ofs_sync $master $replica
+
+            # Write another key to force the test to wait for another event loop iteration
+            # to give the serverCron a chance to disconnect replicas with COB size exceeding the limits
+            $master set key1 "1"
+            wait_for_ofs_sync $master $replica
+
+            assert {[status $master connected_slaves] == 1}
+
+            wait_for_condition 50 100 {
+                [client_field $master replica tot-mem] < $keysize
+            } else {
+                fail "replica client-output-buffer usage is higher than expected."
+            }
+
+            assert {[status $master sync_partial_ok] == 0}
+
+            # Before this fix (#11905), the test would trigger an assertion in 'o->used >= c->ref_block_pos'
+            test {The update of replBufBlock's repl_offset is ok - Regression test for #11666} {
+                set rd [redis_deferring_client]
+                set replid [status $master master_replid]
+                set offset [status $master repl_backlog_first_byte_offset]
+                $rd psync $replid $offset
+                assert_equal {PONG} [$master ping] ;# Make sure the master doesn't crash.
+                $rd close
+            }
+        }
+    }
+}
+