From bb12c1fd00eb51118749bbbc69c5596835fcbd3b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 4 May 2024 19:31:02 +0200 Subject: Adding upstream version 5:7.0.15. Signed-off-by: Daniel Baumann --- tests/integration/psync2.tcl | 382 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 382 insertions(+) create mode 100644 tests/integration/psync2.tcl (limited to 'tests/integration/psync2.tcl') diff --git a/tests/integration/psync2.tcl b/tests/integration/psync2.tcl new file mode 100644 index 0000000..a258f1b --- /dev/null +++ b/tests/integration/psync2.tcl @@ -0,0 +1,382 @@ + +proc show_cluster_status {} { + uplevel 1 { + # The following is the regexp we use to match the log line + # time info. Logs are in the following form: + # + # 11296:M 25 May 2020 17:37:14.652 # Server initialized + set log_regexp {^[0-9]+:[A-Z] [0-9]+ [A-z]+ [0-9]+ ([0-9:.]+) .*} + set repl_regexp {(master|repl|sync|backlog|meaningful|offset)} + + puts "Master ID is $master_id" + for {set j 0} {$j < 5} {incr j} { + puts "$j: sync_full: [status $R($j) sync_full]" + puts "$j: id1 : [status $R($j) master_replid]:[status $R($j) master_repl_offset]" + puts "$j: id2 : [status $R($j) master_replid2]:[status $R($j) second_repl_offset]" + puts "$j: backlog : firstbyte=[status $R($j) repl_backlog_first_byte_offset] len=[status $R($j) repl_backlog_histlen]" + puts "$j: x var is : [$R($j) GET x]" + puts "---" + } + + # Show the replication logs of every instance, interleaving + # them by the log date. + # + # First: load the lines as lists for each instance. + array set log {} + for {set j 0} {$j < 5} {incr j} { + set fd [open $R_log($j)] + while {[gets $fd l] >= 0} { + if {[regexp $log_regexp $l] && + [regexp -nocase $repl_regexp $l]} { + lappend log($j) $l + } + } + close $fd + } + + # To interleave the lines, at every step consume the element of + # the list with the lowest time and remove it. Do it until + # all the lists are empty. + # + # regexp {^[0-9]+:[A-Z] [0-9]+ [A-z]+ [0-9]+ ([0-9:.]+) .*} $l - logdate + while 1 { + # Find the log with smallest time. + set empty 0 + set best 0 + set bestdate {} + for {set j 0} {$j < 5} {incr j} { + if {[llength $log($j)] == 0} { + incr empty + continue + } + regexp $log_regexp [lindex $log($j) 0] - date + if {$bestdate eq {}} { + set best $j + set bestdate $date + } else { + if {[string compare $bestdate $date] > 0} { + set best $j + set bestdate $date + } + } + } + if {$empty == 5} break ; # Our exit condition: no more logs + + # Emit the one with the smallest time (that is the first + # event in the time line). + puts "\[$best port $R_port($best)\] [lindex $log($best) 0]" + set log($best) [lrange $log($best) 1 end] + } + } +} + +start_server {tags {"psync2 external:skip"}} { +start_server {} { +start_server {} { +start_server {} { +start_server {} { + set master_id 0 ; # Current master + set start_time [clock seconds] ; # Test start time + set counter_value 0 ; # Current value of the Redis counter "x" + + # Config + set debug_msg 0 ; # Enable additional debug messages + + set no_exit 0 ; # Do not exit at end of the test + + set duration 40 ; # Total test seconds + + set genload 1 ; # Load master with writes at every cycle + + set genload_time 5000 ; # Writes duration time in ms + + set disconnect 1 ; # Break replication link between random + # master and slave instances while the + # master is loaded with writes. + + set disconnect_period 1000 ; # Disconnect repl link every N ms. + + for {set j 0} {$j < 5} {incr j} { + set R($j) [srv [expr 0-$j] client] + set R_host($j) [srv [expr 0-$j] host] + set R_port($j) [srv [expr 0-$j] port] + set R_id_from_port($R_port($j)) $j ;# To get a replica index by port + set R_log($j) [srv [expr 0-$j] stdout] + if {$debug_msg} {puts "Log file: [srv [expr 0-$j] stdout]"} + } + + set cycle 0 + while {([clock seconds]-$start_time) < $duration} { + incr cycle + test "PSYNC2: --- CYCLE $cycle ---" {} + + # Create a random replication layout. + # Start with switching master (this simulates a failover). + + # 1) Select the new master. + set master_id [randomInt 5] + set used [list $master_id] + test "PSYNC2: \[NEW LAYOUT\] Set #$master_id as master" { + $R($master_id) slaveof no one + $R($master_id) config set repl-ping-replica-period 1 ;# increase the chance that random ping will cause issues + if {$counter_value == 0} { + $R($master_id) set x $counter_value + } + } + + # Build a lookup with the root master of each replica (head of the chain). + array set root_master {} + for {set j 0} {$j < 5} {incr j} { + set r $j + while {1} { + set r_master_port [status $R($r) master_port] + if {$r_master_port == ""} { + set root_master($j) $r + break + } + set r_master_id $R_id_from_port($r_master_port) + set r $r_master_id + } + } + + # Wait for the newly detached master-replica chain (new master and existing replicas that were + # already connected to it, to get updated on the new replication id. + # This is needed to avoid a race that can result in a full sync when a replica that already + # got an updated repl id, tries to psync from one that's not yet aware of it. + wait_for_condition 50 1000 { + ([status $R(0) master_replid] == [status $R($root_master(0)) master_replid]) && + ([status $R(1) master_replid] == [status $R($root_master(1)) master_replid]) && + ([status $R(2) master_replid] == [status $R($root_master(2)) master_replid]) && + ([status $R(3) master_replid] == [status $R($root_master(3)) master_replid]) && + ([status $R(4) master_replid] == [status $R($root_master(4)) master_replid]) + } else { + show_cluster_status + fail "Replica did not inherit the new replid." + } + + # Build a lookup with the direct connection master of each replica. + # First loop that uses random to decide who replicates from who. + array set slave_to_master {} + while {[llength $used] != 5} { + while 1 { + set slave_id [randomInt 5] + if {[lsearch -exact $used $slave_id] == -1} break + } + set rand [randomInt [llength $used]] + set mid [lindex $used $rand] + set slave_to_master($slave_id) $mid + lappend used $slave_id + } + + # 2) Attach all the slaves to a random instance + # Second loop that does the actual SLAVEOF command and make sure execute it in the right order. + while {[array size slave_to_master] > 0} { + foreach slave_id [array names slave_to_master] { + set mid $slave_to_master($slave_id) + + # We only attach the replica to a random instance that already in the old/new chain. + if {$root_master($mid) == $root_master($master_id)} { + # Find a replica that can be attached to the new chain already attached to the new master. + # My new master is in the new chain. + } elseif {$root_master($mid) == $root_master($slave_id)} { + # My new master and I are in the old chain. + } else { + # In cycle 1, we do not care about the order. + if {$cycle != 1} { + # skipping this replica for now to avoid attaching in a bad order + # this is done to avoid an unexpected full sync, when we take a + # replica that already reconnected to the new chain and got a new replid + # and is then set to connect to a master that's still not aware of that new replid + continue + } + } + + set master_host $R_host($master_id) + set master_port $R_port($master_id) + + test "PSYNC2: Set #$slave_id to replicate from #$mid" { + $R($slave_id) slaveof $master_host $master_port + } + + # Wait for replica to be connected before we proceed. + wait_for_condition 50 1000 { + [status $R($slave_id) master_link_status] == "up" + } else { + show_cluster_status + fail "Replica not reconnecting." + } + + set root_master($slave_id) $root_master($mid) + unset slave_to_master($slave_id) + break + } + } + + # Wait for replicas to sync. so next loop won't get -LOADING error + wait_for_condition 50 1000 { + [status $R([expr {($master_id+1)%5}]) master_link_status] == "up" && + [status $R([expr {($master_id+2)%5}]) master_link_status] == "up" && + [status $R([expr {($master_id+3)%5}]) master_link_status] == "up" && + [status $R([expr {($master_id+4)%5}]) master_link_status] == "up" + } else { + show_cluster_status + fail "Replica not reconnecting" + } + + # 3) Increment the counter and wait for all the instances + # to converge. + test "PSYNC2: cluster is consistent after failover" { + $R($master_id) incr x; incr counter_value + for {set j 0} {$j < 5} {incr j} { + wait_for_condition 50 1000 { + [$R($j) get x] == $counter_value + } else { + show_cluster_status + fail "Instance #$j x variable is inconsistent" + } + } + } + + # 4) Generate load while breaking the connection of random + # slave-master pairs. + test "PSYNC2: generate load while killing replication links" { + set t [clock milliseconds] + set next_break [expr {$t+$disconnect_period}] + while {[clock milliseconds]-$t < $genload_time} { + if {$genload} { + $R($master_id) incr x; incr counter_value + } + if {[clock milliseconds] == $next_break} { + set next_break \ + [expr {[clock milliseconds]+$disconnect_period}] + set slave_id [randomInt 5] + if {$disconnect} { + $R($slave_id) client kill type master + if {$debug_msg} { + puts "+++ Breaking link for replica #$slave_id" + } + } + } + } + } + + # 5) Increment the counter and wait for all the instances + set x [$R($master_id) get x] + test "PSYNC2: cluster is consistent after load (x = $x)" { + for {set j 0} {$j < 5} {incr j} { + wait_for_condition 50 1000 { + [$R($j) get x] == $counter_value + } else { + show_cluster_status + fail "Instance #$j x variable is inconsistent" + } + } + } + + # wait for all the slaves to be in sync. + set masteroff [status $R($master_id) master_repl_offset] + wait_for_condition 500 100 { + [status $R(0) master_repl_offset] >= $masteroff && + [status $R(1) master_repl_offset] >= $masteroff && + [status $R(2) master_repl_offset] >= $masteroff && + [status $R(3) master_repl_offset] >= $masteroff && + [status $R(4) master_repl_offset] >= $masteroff + } else { + show_cluster_status + fail "Replicas offsets didn't catch up with the master after too long time." + } + + if {$debug_msg} { + show_cluster_status + } + + test "PSYNC2: total sum of full synchronizations is exactly 4" { + set sum 0 + for {set j 0} {$j < 5} {incr j} { + incr sum [status $R($j) sync_full] + } + if {$sum != 4} { + show_cluster_status + assert {$sum == 4} + } + } + + # In absence of pings, are the instances really able to have + # the exact same offset? + $R($master_id) config set repl-ping-replica-period 3600 + for {set j 0} {$j < 5} {incr j} { + if {$j == $master_id} continue + $R($j) config set repl-timeout 10000 + } + wait_for_condition 500 100 { + [status $R($master_id) master_repl_offset] == [status $R(0) master_repl_offset] && + [status $R($master_id) master_repl_offset] == [status $R(1) master_repl_offset] && + [status $R($master_id) master_repl_offset] == [status $R(2) master_repl_offset] && + [status $R($master_id) master_repl_offset] == [status $R(3) master_repl_offset] && + [status $R($master_id) master_repl_offset] == [status $R(4) master_repl_offset] + } else { + show_cluster_status + fail "Replicas and master offsets were unable to match *exactly*." + } + + # Limit anyway the maximum number of cycles. This is useful when the + # test is skipped via --only option of the test suite. In that case + # we don't want to see many seconds of this test being just skipped. + if {$cycle > 50} break + } + + test "PSYNC2: Bring the master back again for next test" { + $R($master_id) slaveof no one + set master_host $R_host($master_id) + set master_port $R_port($master_id) + for {set j 0} {$j < 5} {incr j} { + if {$j == $master_id} continue + $R($j) slaveof $master_host $master_port + } + + # Wait for replicas to sync. it is not enough to just wait for connected_slaves==4 + # since we might do the check before the master realized that they're disconnected + wait_for_condition 50 1000 { + [status $R($master_id) connected_slaves] == 4 && + [status $R([expr {($master_id+1)%5}]) master_link_status] == "up" && + [status $R([expr {($master_id+2)%5}]) master_link_status] == "up" && + [status $R([expr {($master_id+3)%5}]) master_link_status] == "up" && + [status $R([expr {($master_id+4)%5}]) master_link_status] == "up" + } else { + show_cluster_status + fail "Replica not reconnecting" + } + } + + test "PSYNC2: Partial resync after restart using RDB aux fields" { + # Pick a random slave + set slave_id [expr {($master_id+1)%5}] + set sync_count [status $R($master_id) sync_full] + set sync_partial [status $R($master_id) sync_partial_ok] + set sync_partial_err [status $R($master_id) sync_partial_err] + catch { + $R($slave_id) config rewrite + restart_server [expr {0-$slave_id}] true false + set R($slave_id) [srv [expr {0-$slave_id}] client] + } + # note: just waiting for connected_slaves==4 has a race condition since + # we might do the check before the master realized that the slave disconnected + wait_for_condition 50 1000 { + [status $R($master_id) sync_partial_ok] == $sync_partial + 1 + } else { + puts "prev sync_full: $sync_count" + puts "prev sync_partial_ok: $sync_partial" + puts "prev sync_partial_err: $sync_partial_err" + puts [$R($master_id) info stats] + show_cluster_status + fail "Replica didn't partial sync" + } + set new_sync_count [status $R($master_id) sync_full] + assert {$sync_count == $new_sync_count} + } + + if {$no_exit} { + while 1 { puts -nonewline .; flush stdout; after 1000} + } + +}}}}} -- cgit v1.2.3