diff options
Diffstat (limited to 'ctdb/config/functions')
-rwxr-xr-x | ctdb/config/functions | 1037 |
1 files changed, 1037 insertions, 0 deletions
diff --git a/ctdb/config/functions b/ctdb/config/functions new file mode 100755 index 0000000..725993c --- /dev/null +++ b/ctdb/config/functions @@ -0,0 +1,1037 @@ +# Hey Emacs, this is a -*- shell-script -*- !!! + +# utility functions for ctdb event scripts + +if [ -z "$CTDB_BASE" ] ; then + echo 'CTDB_BASE unset in CTDB functions file' + exit 1 +fi +export CTDB_BASE + +# CTDB_VARDIR is used elsewhere +# shellcheck disable=SC2034 +CTDB_VARDIR="/usr/local/var/lib/ctdb" + +CTDB="${CTDB:-/usr/local/bin/ctdb}" + +# Only (and always) override these variables in test code + +if [ -z "$CTDB_SCRIPT_VARDIR" ] ; then + CTDB_SCRIPT_VARDIR="/usr/local/var/lib/ctdb/scripts" +fi + +if [ -z "$CTDB_SYS_ETCDIR" ] ; then + CTDB_SYS_ETCDIR="/etc" +fi + +if [ -z "$CTDB_HELPER_BINDIR" ] ; then + CTDB_HELPER_BINDIR="/usr/local/libexec/ctdb" +fi + +####################################### +# pull in a system config file, if any + +load_system_config () +{ + for _i ; do + + if [ -f "${CTDB_SYS_ETCDIR}/sysconfig/${_i}" ]; then + . "${CTDB_SYS_ETCDIR}/sysconfig/${_i}" + return + elif [ -f "${CTDB_SYS_ETCDIR}/default/${_i}" ]; then + . "${CTDB_SYS_ETCDIR}/default/${_i}" + return + fi + done +} + +# load_script_options [ component script ] +# script is an event script name relative to a component +# component is currently ignored +load_script_options () +{ + if [ $# -eq 2 ] ; then + _script="$2" + elif [ $# -eq 0 ] ; then + _script="" + else + die "usage: load_script_options [ component script ]" + fi + + _options="${CTDB_BASE}/script.options" + + if [ -r "$_options" ] ; then + . "$_options" + fi + + if [ -n "$_script" ] ; then + _s="${CTDB_BASE}/events/legacy/${_script}" + else + _s="${0%.script}" + fi + _options="${_s}.options" + + if [ -r "$_options" ] ; then + . "$_options" + fi +} + +############################################################## + +die () +{ + _msg="$1" + _rc="${2:-1}" + + echo "$_msg" >&2 + exit "$_rc" +} + +# Log given message or stdin to either syslog or a CTDB log file +# $1 is the tag passed to logger if syslog is in use. +script_log () +{ + _tag="$1" ; shift + + case "$CTDB_LOGGING" in + file:*|"") + if [ -n "$CTDB_LOGGING" ] ; then + _file="${CTDB_LOGGING#file:}" + else + _file="/usr/local/var/log/log.ctdb" + fi + { + if [ -n "$*" ] ; then + echo "$*" + else + cat + fi + } >>"$_file" + ;; + *) + # Handle all syslog:* variants here too. There's no tool to do + # the lossy things, so just use logger. + logger -t "ctdbd: ${_tag}" "$@" + ;; + esac +} + +# When things are run in the background in an eventscript then logging +# output might get lost. This is the "solution". :-) +background_with_logging () +{ + ( + "$@" 2>&1 </dev/null | + script_log "${script_name}&" + )& + + return 0 +} + +############################################################## +# check number of args for different events +ctdb_check_args () +{ + case "$1" in + takeip|releaseip) + if [ $# != 4 ]; then + echo "ERROR: must supply interface, IP and maskbits" + exit 1 + fi + ;; + updateip) + if [ $# != 5 ]; then + echo "ERROR: must supply old interface, new interface, IP and maskbits" + exit 1 + fi + ;; + esac +} + +############################################################## +# determine on what type of system (init style) we are running +detect_init_style() +{ + # only do detection if not already set: + if [ -n "$CTDB_INIT_STYLE" ] ; then + return + fi + + if [ -x /sbin/startproc ]; then + CTDB_INIT_STYLE="suse" + elif [ -x /sbin/start-stop-daemon ]; then + CTDB_INIT_STYLE="debian" + else + CTDB_INIT_STYLE="redhat" + fi +} + +###################################################### +# simulate /sbin/service on platforms that don't have it +# _service() makes it easier to hook the service() function for +# testing. +_service () +{ + _service_name="$1" + _op="$2" + + # do nothing, when no service was specified + [ -z "$_service_name" ] && return + + if [ -x /sbin/service ]; then + $_nice /sbin/service "$_service_name" "$_op" + elif [ -x /usr/sbin/service ]; then + $_nice /usr/sbin/service "$_service_name" "$_op" + elif [ -x /bin/systemctl ]; then + $_nice /bin/systemctl "$_op" "$_service_name" + elif [ -x "${CTDB_SYS_ETCDIR}/init.d/${_service_name}" ]; then + $_nice "${CTDB_SYS_ETCDIR}/init.d/${_service_name}" "$_op" + elif [ -x "${CTDB_SYS_ETCDIR}/rc.d/init.d/${_service_name}" ]; then + $_nice "${CTDB_SYS_ETCDIR}/rc.d/init.d/${_service_name}" "$_op" + fi +} + +service() +{ + _nice="" + _service "$@" +} + +###################################################### +# simulate /sbin/service (niced) on platforms that don't have it +nice_service() +{ + _nice="nice" + _service "$@" +} + +###################################################### +# Cached retrieval of PNN from local node. This never changes so why +# open a client connection to the server each time this is needed? +ctdb_get_pnn () +{ + _pnn_file="${CTDB_SCRIPT_VARDIR}/my-pnn" + if [ ! -f "$_pnn_file" ] ; then + $CTDB pnn >"$_pnn_file" + fi + + cat "$_pnn_file" +} + +# Cached retrieval of private IP address from local node. This never +# changes. +ctdb_get_ip_address () +{ + _ip_addr_file="${CTDB_SCRIPT_VARDIR}/my-ip-address" + if [ ! -f "$_ip_addr_file" ] ; then + $CTDB -X nodestatus | + awk -F '|' 'NR == 2 { print $3 }' >"$_ip_addr_file" + fi + + cat "$_ip_addr_file" +} + +# Cached retrieval of database options for use by event scripts. +# +# If the variables are already set then they should not be overwritten +# - this should only happen during event script testing. +ctdb_get_db_options () +{ + _db_opts_file="${CTDB_SCRIPT_VARDIR}/db_options.cache" + + if [ ! -f "$_db_opts_file" ] ; then + { + ctdb_translate_option "database" \ + "volatile database directory" \ + "CTDB_DBDIR" + ctdb_translate_option "database" \ + "persistent database directory" \ + "CTDB_DBDIR_PERSISTENT" + ctdb_translate_option "database" \ + "state database directory" \ + "CTDB_DBDIR_STATE" + } >"$_db_opts_file" + fi + + . "$_db_opts_file" +} + +ctdb_translate_option () +{ + _section="$1" + _opt="$2" + _variable="$3" + + # ctdb-config already prints an error if something goes wrong + _t=$("${CTDB_HELPER_BINDIR}/ctdb-config" get "$_section" "$_opt") || \ + exit $? + echo "${_variable}=\"${_t}\"" +} + +###################################################### +# wrapper around /proc/ settings to allow them to be hooked +# for testing +# 1st arg is relative path under /proc/, 2nd arg is value to set +set_proc () +{ + echo "$2" >"/proc/$1" +} + +set_proc_maybe () +{ + if [ -w "/proc/$1" ] ; then + set_proc "$1" "$2" + fi +} + +###################################################### +# wrapper around getting file contents from /proc/ to allow +# this to be hooked for testing +# 1st arg is relative path under /proc/ +get_proc () +{ + cat "/proc/$1" +} + +###################################################### +# Print up to $_max kernel stack traces for processes named $_program +program_stack_traces () +{ + _prog="$1" + _max="${2:-1}" + + _count=1 + for _pid in $(pidof "$_prog") ; do + [ "$_count" -le "$_max" ] || break + + # Do this first to avoid racing with process exit + _stack=$(get_proc "${_pid}/stack" 2>/dev/null) + if [ -n "$_stack" ] ; then + echo "Stack trace for ${_prog}[${_pid}]:" + echo "$_stack" + _count=$((_count + 1)) + fi + done +} + +###################################################### +# Ensure $service_name is set +assert_service_name () +{ + # service_name is set by the event script + # shellcheck disable=SC2154 + [ -n "$service_name" ] || die "INTERNAL ERROR: \$service_name not set" +} + +###################################################### +# check a set of directories is available +# return 1 on a missing directory +# directories are read from stdin +###################################################### +ctdb_check_directories_probe() +{ + while IFS="" read d ; do + case "$d" in + *%*) + continue + ;; + *) + [ -d "${d}/." ] || return 1 + esac + done +} + +###################################################### +# check a set of directories is available +# directories are read from stdin +###################################################### +ctdb_check_directories() +{ + ctdb_check_directories_probe || { + echo "ERROR: $service_name directory \"$d\" not available" + exit 1 + } +} + +###################################################### +# check a set of tcp ports +# usage: ctdb_check_tcp_ports <ports...> +###################################################### + +# Check whether something is listening on all of the given TCP ports +# using the "ctdb checktcpport" command. +ctdb_check_tcp_ports() +{ + if [ -z "$1" ] ; then + echo "INTERNAL ERROR: ctdb_check_tcp_ports - no ports specified" + exit 1 + fi + + for _p ; do # process each function argument (port) + _cmd="$CTDB checktcpport $_p" + _out=$($_cmd 2>&1) + _ret=$? + case "$_ret" in + 0) + echo "$service_name not listening on TCP port $_p" + return 1 + ;; + 98) + # Couldn't bind, something already listening, next port + continue + ;; + *) + echo "unexpected error (${_ret}) running \"${_cmd}\"" + if [ -n "$_out" ] ; then + echo "$_out" + fi + return $_ret + ;; + esac + done + + # All ports listening + return 0 +} + +###################################################### +# check a unix socket +# usage: ctdb_check_unix_socket SOCKPATH +###################################################### +ctdb_check_unix_socket() +{ + _sockpath="$1" + + if [ -z "$_sockpath" ] ; then + echo "ERROR: ctdb_check_unix_socket() requires socket path" + return 1 + fi + + _out=$(ss -l -x "src ${_sockpath}" | tail -n +2) + if [ -z "$_out" ] ; then + echo "ERROR: ${service_name} not listening on ${_sockpath}" + return 1 + fi +} + +################################################ +# kill off any TCP connections with the given IP +################################################ +kill_tcp_connections () +{ + _iface="$1" + _ip="$2" + + _oneway=false + if [ "$3" = "oneway" ] ; then + _oneway=true + fi + + get_tcp_connections_for_ip "$_ip" | { + _killcount=0 + _connections="" + _nl=" +" + while read _dst _src; do + _destport="${_dst##*:}" + __oneway=$_oneway + case $_destport in + # we only do one-way killtcp for CIFS + 139|445) __oneway=true ;; + esac + + _connections="${_connections}${_nl}${_src} ${_dst}" + if ! $__oneway ; then + _connections="${_connections}${_nl}${_dst} ${_src}" + fi + + _killcount=$((_killcount + 1)) + done + + if [ $_killcount -eq 0 ] ; then + return + fi + + if [ -n "$CTDB_KILLTCP_DEBUGLEVEL" ]; then + _debuglevel="$CTDB_KILLTCP_DEBUGLEVEL" + else + _debuglevel="$CTDB_DEBUGLEVEL" + fi + echo "$_connections" | \ + CTDB_DEBUGLEVEL="$_debuglevel" \ + "${CTDB_HELPER_BINDIR}/ctdb_killtcp" "$_iface" || { + echo "Failed to kill TCP connections" + return + } + + _connections=$(get_tcp_connections_for_ip "$_ip") + if [ -z "$_connections" ] ; then + _remaining=0 + else + _remaining=$(echo "$_connections" | wc -l) + fi + + _actually_killed=$((_killcount - _remaining)) + + _t="${_actually_killed}/${_killcount}" + echo "Killed ${_t} TCP connections to released IP $_ip" + + if [ -n "$_connections" ] ; then + echo "Remaining connections:" + echo "$_connections" | sed -e 's|^| |' + fi + } +} + +################################################################## +# kill off the local end for any TCP connections with the given IP +################################################################## +kill_tcp_connections_local_only () +{ + kill_tcp_connections "$@" "oneway" +} + +################################################################## +# tickle any TCP connections with the given IP +################################################################## +tickle_tcp_connections () +{ + _ip="$1" + + # Get connections, both directions + _conns=$(get_tcp_connections_for_ip "$_ip" | \ + awk '{ print $1, $2 ; print $2, $1 }') + + echo "$_conns" | awk '{ print "Tickle TCP connection", $1, $2 }' + echo "$_conns" | ctdb tickle +} + +get_tcp_connections_for_ip () +{ + _ip="$1" + + ss -tn state established "src [$_ip]" | awk 'NR > 1 {print $3, $4}' +} + +######################################################## + +add_ip_to_iface () +{ + _iface=$1 + _ip=$2 + _maskbits=$3 + + # Ensure interface is up + ip link set "$_iface" up || \ + die "Failed to bringup interface $_iface" + + # Only need to define broadcast for IPv4 + case "$_ip" in + *:*) _bcast="" ;; + *) _bcast="brd +" ;; + esac + + # Intentionally unquoted multi-word value here + # shellcheck disable=SC2086 + ip addr add "$_ip/$_maskbits" $_bcast dev "$_iface" || { + echo "Failed to add $_ip/$_maskbits on dev $_iface" + return 1 + } + + # Wait 5 seconds for IPv6 addresses to stop being tentative... + if [ -z "$_bcast" ] ; then + for _x in $(seq 1 10) ; do + ip addr show to "${_ip}/128" | grep -q "tentative" || break + sleep 0.5 + done + + # If the address was a duplicate then it won't be on the + # interface so flag an error. + _t=$(ip addr show to "${_ip}/128") + case "$_t" in + "") + echo "Failed to add $_ip/$_maskbits on dev $_iface" + return 1 + ;; + *tentative*|*dadfailed*) + echo "Failed to add $_ip/$_maskbits on dev $_iface" + ip addr del "$_ip/$_maskbits" dev "$_iface" + return 1 + ;; + esac + fi +} + +delete_ip_from_iface() +{ + _iface=$1 + _ip=$2 + _maskbits=$3 + + # This could be set globally for all interfaces but it is probably + # better to avoid surprises, so limit it the interfaces where CTDB + # has public IP addresses. There isn't anywhere else convenient + # to do this so just set it each time. This is much cheaper than + # remembering and re-adding secondaries. + set_proc "sys/net/ipv4/conf/${_iface}/promote_secondaries" 1 + + ip addr del "$_ip/$_maskbits" dev "$_iface" || { + echo "Failed to del $_ip on dev $_iface" + return 1 + } +} + +# If the given IP is hosted then print 2 items: maskbits and iface +ip_maskbits_iface () +{ + _addr="$1" + + case "$_addr" in + *:*) _bits=128 ;; + *) _bits=32 ;; + esac + ip addr show to "${_addr}/${_bits}" 2>/dev/null | \ + awk 'NR == 1 { iface = $2; sub(":$", "", iface) ; + sub("@.*", "", iface) } + $1 ~ /inet/ { mask = $2; sub(".*/", "", mask); + print mask, iface }' +} + +drop_ip () +{ + _addr="${1%/*}" # Remove optional maskbits + + # Intentional word splitting here + # shellcheck disable=SC2046 + set -- $(ip_maskbits_iface "$_addr") + if [ -n "$1" ] ; then + _maskbits="$1" + _iface="$2" + echo "Removing public address $_addr/$_maskbits from device $_iface" + delete_ip_from_iface "$_iface" "$_addr" "$_maskbits" >/dev/null 2>&1 + fi +} + +drop_all_public_ips () +{ + # _x is intentionally ignored + # shellcheck disable=SC2034 + while read _ip _x ; do + case "$_ip" in + \#*) continue ;; + esac + drop_ip "$_ip" + done <"${CTDB_BASE}/public_addresses" +} + +flush_route_cache () +{ + set_proc_maybe sys/net/ipv4/route/flush 1 + set_proc_maybe sys/net/ipv6/route/flush 1 +} + +######################################################## +# Interface monitoring + +# If the interface is a virtual one (e.g. VLAN) then get the +# underlying interface +interface_get_real () +{ + # Output of "ip link show <iface>" + _iface_info="$1" + + # Extract the full interface description to see if it is a VLAN + _t=$(echo "$_iface_info" | + awk 'NR == 1 { iface = $2; sub(":$", "", iface) ; + print iface }') + case "$_t" in + *@*) + # VLAN: use the underlying interface, after the '@' + echo "${_t##*@}" + ;; + *) + # Not a regular VLAN. For backward compatibility, assume + # there is some other sort of VLAN that doesn't have the + # '@' in the output and only use what is before a '.'. If + # there is no '.' then this will be the whole interface + # name. + echo "${_t%%.*}" + esac +} + +# Check whether an interface is operational +interface_monitor () +{ + _iface="$1" + + _iface_info=$(ip link show "$_iface" 2>&1) || { + echo "ERROR: Monitored interface ${_iface} does not exist" + return 1 + } + + + # If the interface is a virtual one (e.g. VLAN) then get the + # underlying interface. + _realiface=$(interface_get_real "$_iface_info") + + if _bi=$(get_proc "net/bonding/${_realiface}" 2>/dev/null) ; then + # This is a bond: various monitoring strategies + echo "$_bi" | grep -q 'Currently Active Slave: None' && { + echo "ERROR: No active slaves for bond device ${_realiface}" + return 1 + } + echo "$_bi" | grep -q '^MII Status: up' || { + echo "ERROR: public network interface ${_realiface} is down" + return 1 + } + echo "$_bi" | grep -q '^Bonding Mode: IEEE 802.3ad Dynamic link aggregation' && { + # This works around a bug in the driver where the + # overall bond status can be up but none of the actual + # physical interfaces have a link. + echo "$_bi" | grep 'MII Status:' | tail -n +2 | grep -q '^MII Status: up' || { + echo "ERROR: No active slaves for 802.ad bond device ${_realiface}" + return 1 + } + } + + return 0 + else + # Not a bond + case "$_iface" in + lo*) + # loopback is always working + return 0 + ;; + ib*) + # we don't know how to test ib links + return 0 + ;; + *) + ethtool "$_iface" | grep -q 'Link detected: yes' || { + # On some systems, this is not successful when a + # cable is plugged but the interface has not been + # brought up previously. Bring the interface up + # and try again... + ip link set "$_iface" up + ethtool "$_iface" | grep -q 'Link detected: yes' || { + echo "ERROR: No link on the public network interface ${_iface}" + return 1 + } + } + return 0 + ;; + esac + fi +} + +######################################################## +# Simple counters +_ctdb_counter_common () +{ + [ $# -le 1 ] || die "usage: _ctdb_counter_common [name]" + + if [ $# -eq 1 ] ; then + _counter_name="${1}.failcount" + else + _counter_name="failcount" + fi + + if [ -z "$script_state_dir" ] ; then + die "ctdb_counter_* functions need ctdb_setup_state_dir()" + fi + + _counter_file="${script_state_dir}/${_counter_name}" +} +# Some code passes an argument +# shellcheck disable=SC2120 +ctdb_counter_init () { + _ctdb_counter_common "$1" + + : >"$_counter_file" +} +ctdb_counter_incr () { + _ctdb_counter_common "$1" + + # unary counting using newlines! + echo >>"$_counter_file" +} +ctdb_counter_get () { + _ctdb_counter_common "$1" + # unary counting! + _val=$(wc -c < "$_counter_file" 2>/dev/null || echo 0) + # Strip leading spaces from ouput of wc (on freebsd) + # shellcheck disable=SC2086 + echo $_val +} + +######################################################## + +# ctdb_setup_state_dir <type> <name> +# Sets/creates script_state_dir) +ctdb_setup_state_dir () +{ + [ $# -eq 2 ] || die "usage: ctdb_setup_state_dir <type> <name>" + + _type="$1" + _name="$2" + + script_state_dir="${CTDB_SCRIPT_VARDIR}/${_type}/${_name}" + + mkdir -p "$script_state_dir" || \ + die "Error creating script state dir \"${script_state_dir}\"" +} + +################################################################## +# Reconfigure a service on demand + +_ctdb_service_reconfigure_common () +{ + if [ -z "$script_state_dir" ] ; then + die "ctdb_service_*_reconfigure() needs ctdb_setup_state_dir()" + fi + + _ctdb_service_reconfigure_flag="${script_state_dir}/need_reconfigure" +} + +ctdb_service_needs_reconfigure () +{ + _ctdb_service_reconfigure_common + [ -e "$_ctdb_service_reconfigure_flag" ] +} + +ctdb_service_set_reconfigure () +{ + _ctdb_service_reconfigure_common + : >"$_ctdb_service_reconfigure_flag" +} + +ctdb_service_unset_reconfigure () +{ + _ctdb_service_reconfigure_common + rm -f "$_ctdb_service_reconfigure_flag" +} + +ctdb_service_reconfigure () +{ + echo "Reconfiguring service \"${service_name}\"..." + ctdb_service_unset_reconfigure + service_reconfigure || return $? + # Intentionally have this use $service_name as default + # shellcheck disable=SC2119 + ctdb_counter_init +} + +# Default service_reconfigure() function does nothing. +service_reconfigure () +{ + : +} + +# Default service_start() and service_stop() functions. + +# These may be overridden in an eventscript. +service_start () +{ + service "$service_name" start +} + +service_stop () +{ + service "$service_name" stop +} + +################################################################## + +# This exists only for backward compatibility with 3rd party scripts +# that call it +ctdb_standard_event_handler () +{ + : +} + +iptables_wrapper () +{ + _family="$1" ; shift + if [ "$_family" = "inet6" ] ; then + _iptables_cmd="ip6tables" + else + _iptables_cmd="iptables" + fi + + # iptables doesn't like being re-entered, so flock-wrap it. + flock -w 30 "${CTDB_SCRIPT_VARDIR}/iptables.flock" "$_iptables_cmd" "$@" +} + +# AIX (and perhaps others?) doesn't have mktemp +# type is commonly supported and more portable than which(1) +# shellcheck disable=SC2039 +if ! type mktemp >/dev/null 2>&1 ; then + mktemp () + { + _dir=false + if [ "$1" = "-d" ] ; then + _dir=true + shift + fi + _d="${TMPDIR:-/tmp}" + _hex10=$(dd if=/dev/urandom count=20 2>/dev/null | \ + cksum | \ + awk '{print $1}') + _t="${_d}/tmp.${_hex10}" + ( + umask 077 + if $_dir ; then + mkdir "$_t" + else + : >"$_t" + fi + ) + echo "$_t" + } +fi + +###################################################################### +# NFS callout handling + +nfs_callout_init () +{ + _state_dir="$1" + + if [ -z "$CTDB_NFS_CALLOUT" ] ; then + CTDB_NFS_CALLOUT="${CTDB_BASE}/nfs-linux-kernel-callout" + fi + # Always export, for statd callout + export CTDB_NFS_CALLOUT + + # If the callout wants to use this then it must create it + export CTDB_NFS_CALLOUT_STATE_DIR="${_state_dir}/callout-state" + + # Export, if set, for use by clustered NFS callouts + if [ -n "$CTDB_NFS_STATE_FS_TYPE" ] ; then + export CTDB_NFS_STATE_FS_TYPE + fi + if [ -n "$CTDB_NFS_STATE_MNT" ] ; then + export CTDB_NFS_STATE_MNT + fi + + nfs_callout_cache="${_state_dir}/nfs_callout_cache" + nfs_callout_cache_callout="${nfs_callout_cache}/CTDB_NFS_CALLOUT" + nfs_callout_cache_ops="${nfs_callout_cache}/ops" +} + +nfs_callout_register () +{ + mkdir -p "$nfs_callout_cache_ops" + rm -f "$nfs_callout_cache_ops"/* + + echo "$CTDB_NFS_CALLOUT" >"$nfs_callout_cache_callout" + + _t=$("$CTDB_NFS_CALLOUT" "register") + if [ -n "$_t" ] ; then + echo "$_t" | + while IFS="" read _op ; do + touch "${nfs_callout_cache_ops}/${_op}" + done + else + touch "${nfs_callout_cache_ops}/ALL" + fi +} + +nfs_callout () +{ + # Re-run registration if $CTDB_NFS_CALLOUT has changed + _prev="" + if [ -r "$nfs_callout_cache_callout" ] ; then + read _prev <"$nfs_callout_cache_callout" + fi + if [ "$CTDB_NFS_CALLOUT" != "$_prev" ] ; then + nfs_callout_register + fi + + # Run the operation if it is registered... + if [ -e "${nfs_callout_cache_ops}/${1}" ] || \ + [ -e "${nfs_callout_cache_ops}/ALL" ]; then + "$CTDB_NFS_CALLOUT" "$@" + fi +} + +######################################################## +# tickle handling +######################################################## + +update_tickles () +{ + _port="$1" + + tickledir="${CTDB_SCRIPT_VARDIR}/tickles" + mkdir -p "$tickledir" + + # What public IPs do I hold? + _pnn=$(ctdb_get_pnn) + _ips=$($CTDB -X ip | awk -F'|' -v pnn="$_pnn" '$3 == pnn {print $2}') + + # IPs and port as ss filters + _ip_filter="" + for _ip in $_ips ; do + _ip_filter="${_ip_filter}${_ip_filter:+ || }src [${_ip}]" + done + _port_filter="sport == :${_port}" + + # Record connections to our public IPs in a temporary file. + # This temporary file is in CTDB's private state directory and + # $$ is used to avoid a very rare race involving CTDB's script + # debugging. No security issue, nothing to see here... + _my_connections="${tickledir}/${_port}.connections.$$" + # Parentheses are needed around the filters for precedence but + # the parentheses can't be empty! + # + # Recent versions of ss print square brackets around IPv6 + # addresses. While it is desirable to update CTDB's address + # parsing and printing code, something needs to be done here + # for backward compatibility, so just delete the brackets. + ss -tn state established \ + "${_ip_filter:+( ${_ip_filter} )}" \ + "${_port_filter:+( ${_port_filter} )}" | + awk 'NR > 1 {print $4, $3}' | + tr -d '][' | + sort >"$_my_connections" + + # Record our current tickles in a temporary file + _my_tickles="${tickledir}/${_port}.tickles.$$" + for _i in $_ips ; do + $CTDB -X gettickles "$_i" "$_port" | + awk -F'|' 'NR > 1 { printf "%s:%s %s:%s\n", $2, $3, $4, $5 }' + done | + sort >"$_my_tickles" + + # Add tickles for connections that we haven't already got tickles for + comm -23 "$_my_connections" "$_my_tickles" | \ + $CTDB addtickle + + # Remove tickles for connections that are no longer there + comm -13 "$_my_connections" "$_my_tickles" | \ + $CTDB deltickle + + rm -f "$_my_connections" "$_my_tickles" + + # Remove stale files from killed scripts + # Files can't have spaces in name, more portable than -print0/-0 + # shellcheck disable=SC2038 + (cd "$tickledir" && find . -type f -mmin +10 | xargs -r rm) +} + +######################################################## +# load a site local config file +######################################################## + +[ -x "${CTDB_BASE}/rc.local" ] && { + . "${CTDB_BASE}/rc.local" +} + +[ -d "${CTDB_BASE}/rc.local.d" ] && { + for i in "${CTDB_BASE}/rc.local.d"/* ; do + [ -x "$i" ] && . "$i" + done +} + +script_name="${0##*/}" # basename |