diff options
Diffstat (limited to '')
| -rwxr-xr-x | ctdb/tools/onnode | 342 |
1 files changed, 342 insertions, 0 deletions
diff --git a/ctdb/tools/onnode b/ctdb/tools/onnode new file mode 100755 index 0000000..425db80 --- /dev/null +++ b/ctdb/tools/onnode @@ -0,0 +1,342 @@ +#!/usr/bin/env bash + +# Run commands on CTDB nodes. + +# See http://ctdb.samba.org/ for more information about CTDB. + +# Copyright (C) Martin Schwenke 2008 + +# Based on an earlier script by Andrew Tridgell and Ronnie Sahlberg. + +# Copyright (C) Andrew Tridgell 2007 + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, see <http://www.gnu.org/licenses/>. + +prog=$(basename "$0") + +usage () +{ + cat >&2 <<EOF +Usage: onnode [OPTION] ... <NODES> <COMMAND> ... + options: + -c Run in current working directory on specified nodes. + -f Specify nodes file, overriding default. + -i Keep standard input open - the default is to close it. + -n Allow nodes to be specified by name. + -p Run command in parallel on specified nodes. + -P Push given files to nodes instead of running commands. + -q Do not print node addresses (overrides -v). + -v Print node address even for a single node. + <NODES> "all", "any", "ok" (or "healthy"), "con" (or "connected") ; or + a node number (0 base); or + a hostname (if -n is specified); or + list (comma separated) of <NODES>; or + range (hyphen separated) of node numbers. +EOF + exit 1 + +} + +invalid_nodespec () +{ + echo "Invalid <nodespec>" >&2 ; echo >&2 + usage +} + +# Defaults. +current=false +ctdb_nodes_file="" +parallel=false +verbose=false +quiet=false +names_ok=false +push=false +stdin=false + +if [ -z "$CTDB_BASE" ] ; then + CTDB_BASE="/usr/local/etc/ctdb" +fi + +parse_options () +{ + local opt + + while getopts "cf:hnpqvPi?" opt ; do + case "$opt" in + c) current=true ;; + f) ctdb_nodes_file="$OPTARG" ;; + n) names_ok=true ;; + p) parallel=true ;; + q) quiet=true ;; + v) verbose=true ;; + P) push=true ;; + i) stdin=true ;; + \?|h) usage ;; + esac + done + shift $((OPTIND - 1)) + + if [ $# -lt 2 ] ; then + usage + fi + + nodespec="$1" ; shift + command="$*" +} + +echo_nth () +{ + local n="$1" ; shift + + # Note that this is 0-based + local node="" + if [ "$n" -le $# ] ; then + shift "$n" + node="$1" + fi + + if [ -n "$node" ] && [ "$node" != "#DEAD" ] ; then + echo "$node" + else + echo "${prog}: \"node ${n}\" does not exist" >&2 + exit 1 + fi +} + +parse_nodespec () +{ + # Subshell avoids hacks to restore $IFS. + ( + IFS="," + for i in $1 ; do + case "$i" in + *-*) seq "${i%-*}" "${i#*-}" 2>/dev/null || invalid_nodespec ;; + all|any|ok|healthy|con|connected) echo "$i" ;; + *) + [ "$i" -gt -1 ] 2>/dev/null || $names_ok || invalid_nodespec + echo "$i" + esac + done + ) +} + +ctdb_status_output="" # cache +get_nodes_with_status () +{ + local all_nodes="$1" + local status="$2" + + if [ -z "$ctdb_status_output" ] ; then + ctdb_status_output=$(ctdb -X status 2>&1) + # No! Checking the exit code afterwards is actually clearer... + # shellcheck disable=SC2181 + if [ $? -ne 0 ] ; then + echo "${prog}: unable to get status of CTDB nodes" >&2 + echo "$ctdb_status_output" >&2 + exit 1 + fi + local nl=" +" + ctdb_status_output="${ctdb_status_output#*"${nl}"}" + fi + + ( + local i + IFS="${IFS}|" + while IFS="" read -r i ; do + + # Intentional word splitting + # shellcheck disable=SC2086 + set -- $i # split line on colons + shift # line starts with : so 1st field is empty + local pnn="$1" ; shift + shift # ignore IP address but need status bits below + + case "$status" in + healthy) + # If any bit is 1, don't match this address. + local s + for s ; do + [ "$s" != "1" ] || continue 2 + done + ;; + connected) + # If disconnected bit is not 0, don't match this address. + [ "$1" = "0" ] || continue + ;; + *) + invalid_nodespec + esac + + # Intentional multi-word expansion + # shellcheck disable=SC2086 + echo_nth "$pnn" $all_nodes + done <<<"$ctdb_status_output" + ) +} + +get_any_available_node () +{ + local all_nodes="$1" + + # We do a recursive onnode to find which nodes are up and running. + local out line + out=$("$0" -pq all ctdb pnn 2>&1) + while read -r line ; do + if [[ "$line" =~ ^[0-9]+$ ]] ; then + local pnn="$line" + # Intentional multi-word expansion + # shellcheck disable=SC2086 + echo_nth "$pnn" $all_nodes + return 0 + fi + # Else must be an error message from a down node. + done <<<"$out" + return 1 +} + +get_nodes () +{ + local all_nodes + + local f="${CTDB_BASE}/nodes" + if [ -n "$ctdb_nodes_file" ] ; then + f="$ctdb_nodes_file" + if [ ! -e "$f" ] && [ "${f#/}" = "$f" ] ; then + # $f is relative, try in $CTDB_BASE + f="${CTDB_BASE}/${f}" + fi + fi + + if [ ! -r "$f" ] ; then + echo "${prog}: unable to open nodes file \"${f}\"" >&2 + exit 1 + fi + + all_nodes=$(sed -e 's@#.*@@g' -e 's@ *@@g' -e 's@^$@#DEAD@' "$f") + + local n nodes + nodes=$(parse_nodespec "$1") || exit $? + for n in $nodes ; do + case "$n" in + all) + echo "${all_nodes//#DEAD/}" + ;; + any) + get_any_available_node "$all_nodes" || exit 1 + ;; + ok|healthy) + get_nodes_with_status "$all_nodes" "healthy" || exit 1 + ;; + con|connected) + get_nodes_with_status "$all_nodes" "connected" || exit 1 + ;; + [0-9]|[0-9][0-9]|[0-9][0-9][0-9]) + # Intentional multi-word expansion + # shellcheck disable=SC2086 + echo_nth "$n" $all_nodes + ;; + *) + $names_ok || invalid_nodespec + echo "$n" + esac + done +} + +push () +{ + local host="$1" + local files="$2" + + local f + for f in $files ; do + $verbose && echo "Pushing $f" + case "$f" in + /*) rsync "$f" "[${host}]:${f}" ;; + *) rsync "${PWD}/${f}" "[${host}]:${PWD}/${f}" ;; + esac + done +} + +###################################################################### + +parse_options "$@" + +ssh_opts= +if $push ; then + if [ -n "$ONNODE_SSH" ] ; then + export RSYNC_RSH="$ONNODE_SSH" + fi + ONNODE_SSH=push +else + $current && command="cd $PWD && $command" + + # Could "2>/dev/null || true" but want to see errors from typos in file. + [ -r "${CTDB_BASE}/onnode.conf" ] && . "${CTDB_BASE}/onnode.conf" + [ -n "$ONNODE_SSH" ] || ONNODE_SSH=ssh + # $ONNODE_SSH must accept the -n option - it can be ignored! + if $parallel || ! $stdin ; then + ssh_opts="-n" + fi +fi + +###################################################################### + +nodes=$(get_nodes "$nodespec") || exit $? + +if $quiet ; then + verbose=false +else + # If $nodes contains a space or a newline then assume multiple nodes. + nl=" +" + [ "$nodes" != "${nodes%[ "${nl}"]*}" ] && verbose=true +fi + +pids="" +# Intentional multi-word expansion +# shellcheck disable=SC2086 +trap 'kill -TERM $pids 2>/dev/null' INT TERM +# There's a small race here where the kill can fail if no processes +# have been added to $pids and the script is interrupted. However, +# the part of the window where it matter is very small. +retcode=0 +for n in $nodes ; do + set -o pipefail 2>/dev/null + + ssh_cmd="$ONNODE_SSH $ssh_opts" + if $parallel ; then + if $verbose ; then + $ssh_cmd "$n" "$command" 2>&1 | sed -e "s@^@[$n] @" + else + $ssh_cmd "$n" "$command" + fi & + pids="${pids} $!" + else + if $verbose ; then + echo >&2 ; echo ">> NODE: $n <<" >&2 + fi + { + $ssh_cmd "$n" "$command" + } || retcode=$? + fi +done + +if $parallel ; then + for p in $pids; do + wait "$p" || retcode=$? + done +fi + +exit $retcode |