diff options
Diffstat (limited to '')
| -rw-r--r-- | third_party/heimdal/kdc/kdc.8 | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/third_party/heimdal/kdc/kdc.8 b/third_party/heimdal/kdc/kdc.8 new file mode 100644 index 0000000..150a3f1 --- /dev/null +++ b/third_party/heimdal/kdc/kdc.8 @@ -0,0 +1,217 @@ +.\" Copyright (c) 2003 - 2004 Kungliga Tekniska Högskolan +.\" (Royal Institute of Technology, Stockholm, Sweden). +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" 3. Neither the name of the Institute nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $Id$ +.\" +.Dd August 24, 2006 +.Dt KDC 8 +.Os HEIMDAL +.Sh NAME +.Nm kdc +.Nd Kerberos 5 server +.Sh SYNOPSIS +.Nm +.Bk -words +.Oo Fl c Ar file \*(Ba Xo +.Fl Fl config-file= Ns Ar file +.Xc +.Oc +.Op Fl p | Fl Fl no-require-preauth +.Op Fl Fl max-request= Ns Ar size +.Op Fl H | Fl Fl enable-http +.Oo Fl P Ar portspec \*(Ba Xo +.Fl Fl ports= Ns Ar portspec +.Xc +.Oc +.Op Fl Fl detach +.Op Fl Fl disable-des +.Op Fl Fl addresses= Ns Ar list of addresses +.Ek +.Sh DESCRIPTION +.Nm +serves requests for tickets. +When it starts, it first checks the flags passed, any options that are +not specified with a command line flag are taken from a config file, +or from a default compiled-in value. +.Pp +Options supported: +.Bl -tag -width Ds +.It Fl c Ar file , Fl Fl config-file= Ns Ar file +Specifies the location of the config file, the default is +.Pa /var/heimdal/kdc.conf . +This is the only value that can't be specified in the config file. +.It Fl p , Fl Fl no-require-preauth +Turn off the requirement for pre-autentication in the initial AS-REQ +for all principals. +The use of pre-authentication makes it more difficult to do offline +password attacks. +You might want to turn it off if you have clients +that don't support pre-authentication. +Since the version 4 protocol doesn't support any pre-authentication, +serving version 4 clients is just about the same as not requiring +pre-athentication. +The default is to require pre-authentication. +Adding the require-preauth per principal is a more flexible way of +handling this. +.It Fl Fl max-request= Ns Ar size +Gives an upper limit on the size of the requests that the kdc is +willing to handle. +.It Fl H , Fl Fl enable-http +Makes the kdc listen on port 80 and handle requests encapsulated in HTTP. +.It Fl P Ar portspec , Fl Fl ports= Ns Ar portspec +Specifies the set of ports the KDC should listen on. +It is given as a +white-space separated list of services or port numbers. +.It Fl Fl addresses= Ns Ar list of addresses +The list of addresses to listen for requests on. +By default, the kdc will listen on all the locally configured +addresses. +If only a subset is desired, or the automatic detection fails, this +option might be used. +.It Fl Fl detach +detach from pty and run as a daemon. +.It Fl Fl disable-des +disable all des encryption types, makes the kdc not use them. +.El +.Pp +All activities are logged to one or more destinations, see +.Xr krb5.conf 5 , +and +.Xr krb5_openlog 3 . +The entity used for logging is +.Nm kdc . +.Sh CONFIGURATION FILE +The configuration file has the same syntax as +.Xr krb5.conf 5 , +but will be read before +.Pa /etc/krb5.conf , +so it may override settings found there. +Options specific to the KDC only are found in the +.Dq [kdc] +section. +All the command-line options can preferably be added in the +configuration file. +The only difference is the pre-authentication flag, which has to be +specified as: +.Pp +.Dl require-preauth = no +.Pp +(in fact you can specify the option as +.Fl Fl require-preauth=no ) . +.Pp +And there are some configuration options which do not have +command-line equivalents: +.Bl -tag -width "xxx" -offset indent +.It Li enable-digest = Va boolean +turn on support for digest processing in the KDC. +The default is FALSE. +.It Li check-ticket-addresses = Va boolean +Check the addresses in the ticket when processing TGS requests. +The default is TRUE. +.It Li allow-null-ticket-addresses = Va boolean +Permit tickets with no addresses. +This option is only relevant when check-ticket-addresses is TRUE. +.It Li allow-anonymous = Va boolean +Permit anonymous tickets with no addresses. +.It Li historical_anon_realm = Va boolean +Enables pre-7.0 non-RFC-comformant KDC behavior. +With this option set to +.Li true +the client realm in anonymous pkinit AS replies will be the requested realm, +rather than the RFC-conformant +.Li WELLKNOWN:ANONYMOUS +realm. +This can have a security impact on servers that expect to grant access to +anonymous-but-authenticated to the KDC users of the realm in question: +they would also grant access to unauthenticated anonymous users. +As such, it is not recommend to set this option to +.Li true. +.It Li max-kdc-datagram-reply-length = Va number +Maximum packet size the UDP rely that the KDC will transmit, instead +the KDC sends back a reply telling the client to use TCP instead. +.It Li transited-policy = Li always-check \*(Ba \ +Li allow-per-principal | Li always-honour-request +This controls how KDC requests with the +.Li disable-transited-check +flag are handled. It can be one of: +.Bl -tag -width "xxx" -offset indent +.It Li always-check +Always check transited encoding, this is the default. +.It Li allow-per-principal +Currently this is identical to +.Li always-check . +In a future release, it will be possible to mark a principal as able +to handle unchecked requests. +.It Li always-honour-request +Always do what the client asked. +In a future release, it will be possible to force a check per +principal. +.El +.It encode_as_rep_as_tgs_rep = Va boolean +Encode AS-Rep as TGS-Rep to be bug-compatible with old DCE code. +The Heimdal clients allow both. +.It kdc_warn_pwexpire = Va time +How long before password/principal expiration the KDC should start +sending out warning messages. +.El +.Pp +The configuration file is only read when the +.Nm +is started. +If changes made to the configuration file are to take effect, the +.Nm +needs to be restarted. +.Pp +An example of a config file: +.Bd -literal -offset indent +[kdc] + require-preauth = no +.Ed +.Sh BUGS +If the machine running the KDC has new addresses added to it, the KDC +will have to be restarted to listen to them. +The reason it doesn't just listen to wildcarded (like INADDR_ANY) +addresses, is that the replies has to come from the same address they +were sent to, and most OS:es doesn't pass this information to the +application. +If your normal mode of operation require that you add and remove +addresses, the best option is probably to listen to a wildcarded TCP +socket, and make sure your clients use TCP to connect. +For instance, this will listen to IPv4 TCP port 88 only: +.Bd -literal -offset indent +kdc --addresses=0.0.0.0 --ports="88/tcp" +.Ed +.Pp +There should be a way to specify protocol, port, and address triplets, +not just addresses and protocol, port tuples. +.Sh SEE ALSO +.Xr kinit 1 , +.Xr krb5.conf 5 |