From 4f5791ebd03eaec1c7da0865a383175b05102712 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 5 May 2024 19:47:29 +0200 Subject: Adding upstream version 2:4.17.12+dfsg. Signed-off-by: Daniel Baumann --- lib/tsocket/tsocket.h | 1297 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1297 insertions(+) create mode 100644 lib/tsocket/tsocket.h (limited to 'lib/tsocket/tsocket.h') diff --git a/lib/tsocket/tsocket.h b/lib/tsocket/tsocket.h new file mode 100644 index 0000000..d3cde99 --- /dev/null +++ b/lib/tsocket/tsocket.h @@ -0,0 +1,1297 @@ +/* + Unix SMB/CIFS implementation. + + Copyright (C) Stefan Metzmacher 2009 + + ** NOTE! The following LGPL license applies to the tsocket + ** library. This does NOT imply that all of Samba is released + ** under the LGPL + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 3 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, see . +*/ + +#ifndef _TSOCKET_H +#define _TSOCKET_H + +#include + +struct samba_sockaddr; +struct tsocket_address; +struct tdgram_context; +struct tstream_context; +struct iovec; + +/** + * @mainpage + * + * The tsocket abstraction is an API ... + */ + +/** + * @defgroup tsocket The tsocket API + * + * The tsocket abstraction is split into two different kinds of + * communication interfaces. + * + * There's the "tstream_context" interface with abstracts the communication + * through a bidirectional byte stream between two endpoints. + * + * And there's the "tdgram_context" interface with abstracts datagram based + * communication between any number of endpoints. + * + * Both interfaces share the "tsocket_address" abstraction for endpoint + * addresses. + * + * The whole library is based on the talloc(3) and 'tevent' libraries and + * provides "tevent_req" based "foo_send()"/"foo_recv()" functions pairs for + * all abstracted methods that need to be async. + * + * @section vsock Virtual Sockets + * + * The abstracted layout of tdgram_context and tstream_context allow + * implementations around virtual sockets for encrypted tunnels (like TLS, + * SASL or GSSAPI) or named pipes over smb. + * + * @section npa Named Pipe Auth (NPA) Sockets + * + * Samba has an implementation to abstract named pipes over smb (within the + * server side). See libcli/named_pipe_auth/npa_tstream.[ch] for the core code. + * The current callers are located in source4/ntvfs/ipc/vfs_ipc.c and + * source4/rpc_server/service_rpc.c for the users. + */ + +/** + * @defgroup tsocket_address The tsocket_address abstraction + * @ingroup tsocket + * + * The tsocket_address represents an socket endpoint genericly. + * As it's like an abstract class it has no specific constructor. + * The specific constructors are descripted in later sections. + * + * @{ + */ + +/** + * @brief Get a string representation of the endpoint. + * + * This function creates a string representation of the endpoint for debugging. + * The output will look as followed: + * prefix:address:port + * + * e.g. + * ipv4:192.168.1.1:143 + * + * Callers should not try to parse the string! The should use additional methods + * of the specific tsocket_address implemention to get more details. + * + * @param[in] addr The address to convert. + * + * @param[in] mem_ctx The talloc memory context to allocate the memory. + * + * @return The address as a string representation, NULL on error. + * + * @see tsocket_address_is_inet() + * @see tsocket_address_inet_addr_string() + * @see tsocket_address_inet_port() + */ +char *tsocket_address_string(const struct tsocket_address *addr, + TALLOC_CTX *mem_ctx); + +#ifdef DOXYGEN +/** + * @brief This creates a copy of a tsocket_address. + * + * This is useful when before doing modifications to a socket via additional + * methods of the specific tsocket_address implementation. + * + * @param[in] addr The address to create the copy from. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @return A newly allocated copy of addr (tsocket_address *), NULL + * on error. + */ +struct tsocket_address *tsocket_address_copy(const struct tsocket_address *addr, + TALLOC_CTX *mem_ctx); +#else +struct tsocket_address *_tsocket_address_copy(const struct tsocket_address *addr, + TALLOC_CTX *mem_ctx, + const char *location); + +#define tsocket_address_copy(addr, mem_ctx) \ + _tsocket_address_copy(addr, mem_ctx, __location__) +#endif + +/** + * @} + */ + +/** + * @defgroup tdgram_context The tdgram_context abstraction + * @ingroup tsocket + * + * The tdgram_context is like an abstract class for datagram based sockets. The + * interface provides async 'tevent_req' based functions on top functionality + * is similar to the recvfrom(2)/sendto(2)/close(2) syscalls. + * + * @note You can always use talloc_free(tdgram) to cleanup the resources + * of the tdgram_context on a fatal error. + * @{ + */ + +/** + * @brief Ask for next available datagram on the abstracted tdgram_context. + * + * It returns a 'tevent_req' handle, where the caller can register + * a callback with tevent_req_set_callback(). The callback is triggered + * when a datagram is available or an error happened. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] dgram The dgram context to work on. + * + * @return Returns a 'tevent_req' handle, where the caller can + * register a callback with tevent_req_set_callback(). + * NULL on fatal error. + * + * @see tdgram_inet_udp_socket() + * @see tdgram_unix_socket() + */ +struct tevent_req *tdgram_recvfrom_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tdgram_context *dgram); + +/** + * @brief Receive the next available datagram on the abstracted tdgram_context. + * + * This function should be called by the callback when a datagram is available + * or an error happened. + * + * The caller can only have one outstanding tdgram_recvfrom_send() at a time + * otherwise the caller will get '*perrno = EBUSY'. + * + * @param[in] req The tevent request from tdgram_recvfrom_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @param[in] mem_ctx The memory context to use. + * + * @param[out] buf This will hold the buffer of the datagram. + * + * @param[out] src The abstracted tsocket_address of the sender of the + * received datagram. + * + * @return The length of the datagram (0 is never returned!), + * -1 on error with perrno set to the actual errno. + * + * @see tdgram_recvfrom_send() + */ +ssize_t tdgram_recvfrom_recv(struct tevent_req *req, + int *perrno, + TALLOC_CTX *mem_ctx, + uint8_t **buf, + struct tsocket_address **src); + +/** + * @brief Send a datagram to a destination endpoint. + * + * The function can be called to send a datagram (specified by a buf/len) to a + * destination endpoint (specified by dst). It's not allowed for len to be 0. + * + * It returns a 'tevent_req' handle, where the caller can register a callback + * with tevent_req_set_callback(). The callback is triggered when the specific + * implementation (assumes it) has delivered the datagram to the "wire". + * + * The callback is then supposed to get the result by calling + * tdgram_sendto_recv() on the 'tevent_req'. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] dgram The dgram context to work on. + * + * @param[in] buf The buffer to send. + * + * @param[in] len The length of the buffer to send. It has to be bigger + * than 0. + * + * @param[in] dst The destination to send the datagram to in form of a + * tsocket_address. + * + * @return Returns a 'tevent_req' handle, where the caller can + * register a callback with tevent_req_set_callback(). + * NULL on fatal error. + * + * @see tdgram_inet_udp_socket() + * @see tdgram_unix_socket() + * @see tdgram_sendto_recv() + */ +struct tevent_req *tdgram_sendto_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tdgram_context *dgram, + const uint8_t *buf, size_t len, + const struct tsocket_address *dst); + +/** + * @brief Receive the result of the sent datagram. + * + * The caller can only have one outstanding tdgram_sendto_send() at a time + * otherwise the caller will get '*perrno = EBUSY'. + * + * @param[in] req The tevent request from tdgram_sendto_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @return The length of the datagram (0 is never returned!), -1 on + * error with perrno set to the actual errno. + * + * @see tdgram_sendto_send() + */ +ssize_t tdgram_sendto_recv(struct tevent_req *req, + int *perrno); + +/** + * @brief Shutdown/close an abstracted socket. + * + * It returns a 'tevent_req' handle, where the caller can register a callback + * with tevent_req_set_callback(). The callback is triggered when the specific + * implementation (assumes it) has delivered the datagram to the "wire". + * + * The callback is then supposed to get the result by calling + * tdgram_sendto_recv() on the 'tevent_req'. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] dgram The dgram context diconnect from. + * + * @return Returns a 'tevent_req' handle, where the caller can + * register a callback with tevent_req_set_callback(). + * NULL on fatal error. + * + * @see tdgram_disconnect_recv() + */ +struct tevent_req *tdgram_disconnect_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tdgram_context *dgram); + +/** + * @brief Receive the result from a tdgram_disconnect_send() request. + * + * The caller should make sure there're no outstanding tdgram_recvfrom_send() + * and tdgram_sendto_send() calls otherwise the caller will get + * '*perrno = EBUSY'. + * + * @param[in] req The tevent request from tdgram_disconnect_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @return The length of the datagram (0 is never returned!), -1 on + * error with perrno set to the actual errno. + * + * @see tdgram_disconnect_send() + */ +int tdgram_disconnect_recv(struct tevent_req *req, + int *perrno); + +/** + * @} + */ + +/** + * @defgroup tstream_context The tstream_context abstraction + * @ingroup tsocket + * + * The tstream_context is like an abstract class for stream based sockets. The + * interface provides async 'tevent_req' based functions on top functionality + * is similar to the readv(2)/writev(2)/close(2) syscalls. + * + * @note You can always use talloc_free(tstream) to cleanup the resources + * of the tstream_context on a fatal error. + * + * @{ + */ + +/** + * @brief Report the number of bytes received but not consumed yet. + * + * The tstream_pending_bytes() function reports how much bytes of the incoming + * stream have been received but not consumed yet. + * + * @param[in] stream The tstream_context to check for pending bytes. + * + * @return The number of bytes received, -1 on error with errno + * set. + */ +ssize_t tstream_pending_bytes(struct tstream_context *stream); + +/** + * @brief Read a specific amount of bytes from a stream socket. + * + * The function can be called to read for a specific amount of bytes from the + * stream into given buffers. The caller has to preallocate the buffers. + * + * The caller might need to use tstream_pending_bytes() if the protocol doesn't + * have a fixed pdu header containing the pdu size. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] stream The tstream context to work on. + * + * @param[out] vector A preallocated iovec to store the data to read. + * + * @param[in] count The number of buffers in the vector allocated. + * + * @return A 'tevent_req' handle, where the caller can register + * a callback with tevent_req_set_callback(). NULL on + * fatal error. + * + * @see tstream_unix_connect_send() + * @see tstream_inet_tcp_connect_send() + */ +struct tevent_req *tstream_readv_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tstream_context *stream, + struct iovec *vector, + size_t count); + +/** + * @brief Get the result of a tstream_readv_send(). + * + * The caller can only have one outstanding tstream_readv_send() + * at a time otherwise the caller will get *perrno = EBUSY. + * + * @param[in] req The tevent request from tstream_readv_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @return The length of the stream (0 is never returned!), -1 on + * error with perrno set to the actual errno. + */ +int tstream_readv_recv(struct tevent_req *req, + int *perrno); + +/** + * @brief Write buffers from a vector into a stream socket. + * + * The function can be called to write buffers from a given vector + * to a stream socket. + * + * You have to ensure that the vector is not empty. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] stream The tstream context to work on. + * + * @param[in] vector The iovec vector with data to write on a stream socket. + * + * @param[in] count The number of buffers in the vector to write. + * + * @return A 'tevent_req' handle, where the caller can register + * a callback with tevent_req_set_callback(). NULL on + * fatal error. + */ +struct tevent_req *tstream_writev_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tstream_context *stream, + const struct iovec *vector, + size_t count); + +/** + * @brief Get the result of a tstream_writev_send(). + * + * The caller can only have one outstanding tstream_writev_send() + * at a time otherwise the caller will get *perrno = EBUSY. + * + * @param[in] req The tevent request from tstream_writev_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @return The length of the stream (0 is never returned!), -1 on + * error with perrno set to the actual errno. + */ +int tstream_writev_recv(struct tevent_req *req, + int *perrno); + +/** + * @brief Shutdown/close an abstracted socket. + * + * It returns a 'tevent_req' handle, where the caller can register a callback + * with tevent_req_set_callback(). The callback is triggered when the specific + * implementation (assumes it) has delivered the stream to the "wire". + * + * The callback is then supposed to get the result by calling + * tdgram_sendto_recv() on the 'tevent_req'. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] stream The tstream context to work on. + * + * @return A 'tevent_req' handle, where the caller can register + * a callback with tevent_req_set_callback(). NULL on + * fatal error. + */ +struct tevent_req *tstream_disconnect_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tstream_context *stream); + +/** + * @brief Get the result of a tstream_disconnect_send(). + * + * The caller can only have one outstanding tstream_writev_send() + * at a time otherwise the caller will get *perrno = EBUSY. + * + * @param[in] req The tevent request from tstream_disconnect_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @return The length of the stream (0 is never returned!), -1 on + * error with perrno set to the actual errno. + */ +int tstream_disconnect_recv(struct tevent_req *req, + int *perrno); + +/** + * @} + */ + + +/** + * @defgroup tsocket_bsd tsocket_bsd - inet, inet6 and unix + * @ingroup tsocket + * + * The main tsocket library comes with implementations for BSD style ipv4, ipv6 + * and unix sockets. + * + * @{ + */ + +/** + * @brief Find out if the tsocket_address represents an ipv4 or ipv6 endpoint. + * + * @param[in] addr The tsocket_address pointer + * + * @param[in] fam The family can be can be "ipv4", "ipv6" or "ip". With + * "ip" is autodetects "ipv4" or "ipv6" based on the + * addr. + * + * @return true if addr represents an address of the given family, + * otherwise false. + */ +bool tsocket_address_is_inet(const struct tsocket_address *addr, const char *fam); + +#ifdef DOXYGEN +/** + * @brief Create a tsocket_address for ipv4 and ipv6 endpoint addresses. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] fam The family can be can be "ipv4", "ipv6" or "ip". With + * "ip" is autodetects "ipv4" or "ipv6" based on the + * addr. + * + * @param[in] addr A valid ip address string based on the selected family + * (dns names are not allowed!). It's valid to pass NULL, + * which gets mapped to "0.0.0.0" or "::". + * + * @param[in] port A valid port number. + * + * @param[out] _addr A tsocket_address pointer to store the information. + * + * @return 0 on success, -1 on error with errno set. + */ +int tsocket_address_inet_from_strings(TALLOC_CTX *mem_ctx, + const char *fam, + const char *addr, + uint16_t port, + struct tsocket_address **_addr); +#else +int _tsocket_address_inet_from_strings(TALLOC_CTX *mem_ctx, + const char *fam, + const char *addr, + uint16_t port, + struct tsocket_address **_addr, + const char *location); + +#define tsocket_address_inet_from_strings(mem_ctx, fam, addr, port, _addr) \ + _tsocket_address_inet_from_strings(mem_ctx, fam, addr, port, _addr, \ + __location__) +#endif + +#ifdef DOXYGEN +/** + * @brief Create a tsocket_address for ipv4 and ipv6 endpoint addresses. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] fam The family can be can be "ipv4", "ipv6" or "ip". With + * "ip" it autodetects "ipv4" or "ipv6" based on the + * addr. + * + * @param[in] host_port_addr A valid ip address string based on the + * selected family (dns names are not allowed!). A port + * number may follow sepatated by a colon. IPv6 may be + * surrounded in square brackets, and these are required + * if appending a port number. It's valid to pass NULL, + * which gets mapped to "0.0.0.0" or "::". + * + * @param[in] default_port A valid port number for the default port if none + * given. + * + * @param[out] _addr A tsocket_address pointer to store the information. + * + * @return 0 on success, -1 on error with errno set. + */ +int tsocket_address_inet_from_hostport_strings(TALLOC_CTX *mem_ctx, + const char *fam, + const char *host_port_addr, + uint16_t default_port, + struct tsocket_address **_addr); +#else +int _tsocket_address_inet_from_hostport_strings(TALLOC_CTX *mem_ctx, + const char *fam, + const char *host_port_addr, + uint16_t default_port, + struct tsocket_address **_addr, + const char *location); + +#define tsocket_address_inet_from_hostport_strings( \ + mem_ctx, fam, host_port_addr, default_port, _addr) \ + _tsocket_address_inet_from_hostport_strings( \ + mem_ctx, fam, host_port_addr, default_port, _addr, __location__) +#endif + +/** + * @brief Get the address of an 'inet' tsocket_address as a string. + * + * @param[in] addr The address to convert to a string. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @return A newly allocated string of the address, NULL on error + * with errno set. + * + * @see tsocket_address_is_inet() + */ +char *tsocket_address_inet_addr_string(const struct tsocket_address *addr, + TALLOC_CTX *mem_ctx); + +/** + * @brief Get the port number as an integer from an 'inet' tsocket_address. + * + * @param[in] addr The tsocket address to use. + * + * @return The port number, 0 on error with errno set. + */ +uint16_t tsocket_address_inet_port(const struct tsocket_address *addr); + +/** + * @brief Set the port number of an existing 'inet' tsocket_address. + * + * @param[in] addr The existing tsocket_address to use. + * + * @param[in] port The valid port number to set. + * + * @return 0 on success, -1 on error with errno set. + */ +int tsocket_address_inet_set_port(struct tsocket_address *addr, + uint16_t port); + +/** + * @brief Find out if the tsocket_address represents an unix domain endpoint. + * + * @param[in] addr The tsocket_address pointer + * + * @return true if addr represents an unix domain endpoint, + * otherwise false. + */ +bool tsocket_address_is_unix(const struct tsocket_address *addr); + +#ifdef DOXYGEN +/** + * @brief Create a tsocket_address for a unix domain endpoint addresses. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] path The filesystem path, NULL will map "". + * + * @param[in] _addr The tsocket_address pointer to store the information. + * + * @return 0 on success, -1 on error with errno set. + * + * @see tsocket_address_is_unix() + */ +int tsocket_address_unix_from_path(TALLOC_CTX *mem_ctx, + const char *path, + struct tsocket_address **_addr); +#else +int _tsocket_address_unix_from_path(TALLOC_CTX *mem_ctx, + const char *path, + struct tsocket_address **_addr, + const char *location); + +#define tsocket_address_unix_from_path(mem_ctx, path, _addr) \ + _tsocket_address_unix_from_path(mem_ctx, path, _addr, \ + __location__) +#endif + +/** + * @brief Get the address of an 'unix' tsocket_address. + * + * @param[in] addr A valid 'unix' tsocket_address. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @return The path of the unix domain socket, NULL on error or if + * the tsocket_address doesn't represent an unix domain + * endpoint path. + */ +char *tsocket_address_unix_path(const struct tsocket_address *addr, + TALLOC_CTX *mem_ctx); + +#ifdef DOXYGEN +/** + * @brief Wrap an existing file descriptors into the tdgram abstraction. + * + * You can use this function to wrap an existing file descriptors into the + * tdgram abstraction. After that you're not able to use this file descriptor + * for anything else. The file descriptor will be closed when the stream gets + * freed. If you still want to use the fd you have have to create a duplicate. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] fd The non blocking fd to use! + * + * @param[out] dgram A pointer to store an allocated tdgram_context. + * + * @return 0 on success, -1 on error. + * + * Example: + * @code + * fd2 = dup(fd); + * rc = tdgram_bsd_existing_socket(mem_ctx, fd2, &tdgram); + * if (rc < 0) { + * return; + * } + * @endcode + * + * @warning This is an internal function. You should read the code to fully + * understand it if you plan to use it. + */ +int tdgram_bsd_existing_socket(TALLOC_CTX *mem_ctx, + int fd, + struct tdgram_context **dgram); +#else +int _tdgram_bsd_existing_socket(TALLOC_CTX *mem_ctx, + int fd, + struct tdgram_context **_dgram, + const char *location); +#define tdgram_bsd_existing_socket(mem_ctx, fd, dgram) \ + _tdgram_bsd_existing_socket(mem_ctx, fd, dgram, \ + __location__) +#endif + +/** + * @brief Request a syscall optimization for tdgram_recvfrom_send() + * + * This function is only used to reduce the amount of syscalls and + * optimize performance. You should only use this if you know + * what you're doing. + * + * The optimization is off by default. + * + * @param[in] dgram The tdgram_context of a bsd socket, if this + * not a bsd socket the function does nothing. + * + * @param[in] on The boolean value to turn the optimization on and off. + * + * @return The old boolean value. + * + * @see tdgram_recvfrom_send() + */ +bool tdgram_bsd_optimize_recvfrom(struct tdgram_context *dgram, + bool on); + +#ifdef DOXYGEN +/** + * @brief Create a tdgram_context for a ipv4 or ipv6 UDP communication. + * + * @param[in] local An 'inet' tsocket_address for the local endpoint. + * + * @param[in] remote An 'inet' tsocket_address for the remote endpoint or + * NULL (??? to create a listener?). + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] dgram The tdgram_context pointer to setup the udp + * communication. The function will allocate the memory. + * + * @return 0 on success, -1 on error with errno set. + * + * @see tdgram_inet_udp_broadcast_socket() + */ +int tdgram_inet_udp_socket(const struct tsocket_address *local, + const struct tsocket_address *remote, + TALLOC_CTX *mem_ctx, + struct tdgram_context **dgram); +#else +int _tdgram_inet_udp_socket(const struct tsocket_address *local, + const struct tsocket_address *remote, + TALLOC_CTX *mem_ctx, + struct tdgram_context **dgram, + const char *location); +#define tdgram_inet_udp_socket(local, remote, mem_ctx, dgram) \ + _tdgram_inet_udp_socket(local, remote, mem_ctx, dgram, __location__) +#endif + +#ifdef DOXYGEN +/** + * @brief Create a tdgram_context for a ipv4 UDP broadcast (and unicast) communication. + * + * @param[in] local An 'inet' (ipv4 only) tsocket_address for the local endpoint. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] dgram The tdgram_context pointer to setup the udp + * communication. The function will allocate the memory. + * + * @return 0 on success, -1 on error with errno set. + * + * @see tdgram_inet_udp_socket() + */ +int tdgram_inet_udp_broadcast_socket(const struct tsocket_address *local, + TALLOC_CTX *mem_ctx, + struct tdgram_context **dgram); +#else +int _tdgram_inet_udp_broadcast_socket(const struct tsocket_address *local, + TALLOC_CTX *mem_ctx, + struct tdgram_context **dgram, + const char *location); +#define tdgram_inet_udp_broadcast_socket(local, mem_ctx, dgram) \ + _tdgram_inet_udp_broadcast_socket(local, mem_ctx, dgram, __location__) +#endif + +#ifdef DOXYGEN +/** + * @brief Create a tdgram_context for unix domain datagram communication. + * + * @param[in] local An 'unix' tsocket_address for the local endpoint. + * + * @param[in] remote An 'unix' tsocket_address for the remote endpoint or + * NULL (??? to create a listener?). + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] dgram The tdgram_context pointer to setup the udp + * communication. The function will allocate the memory. + * + * @return 0 on success, -1 on error with errno set. + */ +int tdgram_unix_socket(const struct tsocket_address *local, + const struct tsocket_address *remote, + TALLOC_CTX *mem_ctx, + struct tdgram_context **dgram); +#else +int _tdgram_unix_socket(const struct tsocket_address *local, + const struct tsocket_address *remote, + TALLOC_CTX *mem_ctx, + struct tdgram_context **dgram, + const char *location); + +#define tdgram_unix_socket(local, remote, mem_ctx, dgram) \ + _tdgram_unix_socket(local, remote, mem_ctx, dgram, __location__) +#endif + +/** + * @brief Request a syscall optimization for tstream_readv_send() + * + * This function is only used to reduce the amount of syscalls and + * optimize performance. You should only use this if you know + * what you're doing. + * + * The optimization is off by default. + * + * @param[in] stream The tstream_context of a bsd socket, if this + * not a bsd socket the function does nothing. + * + * @param[in] on The boolean value to turn the optimization on and off. + * + * @return The old boolean value. + * + * @see tstream_readv_send() + */ +bool tstream_bsd_optimize_readv(struct tstream_context *stream, + bool on); + +/** + * @brief Connect async to a TCP endpoint and create a tstream_context for the + * stream based communication. + * + * Use this function to connect asynchronously to a remote ipv4 or ipv6 TCP + * endpoint and create a tstream_context for the stream based communication. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] local An 'inet' tsocket_address for the local endpoint. + * + * @param[in] remote An 'inet' tsocket_address for the remote endpoint. + * + * @return A 'tevent_req' handle, where the caller can register a + * callback with tevent_req_set_callback(). NULL on a fatal + * error. + * + * @see tstream_inet_tcp_connect_recv() + */ +struct tevent_req *tstream_inet_tcp_connect_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + const struct tsocket_address *local, + const struct tsocket_address *remote); + +#ifdef DOXYGEN +/** + * @brief Receive the result from a tstream_inet_tcp_connect_send(). + * + * @param[in] req The tevent request from tstream_inet_tcp_connect_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[out] stream A tstream_context pointer to setup the tcp communication + * on. This function will allocate the memory. + * + * @param[out] local The real 'inet' tsocket_address of the local endpoint. + * This parameter is optional and can be NULL. + * + * @return 0 on success, -1 on error with perrno set. + */ +int tstream_inet_tcp_connect_recv(struct tevent_req *req, + int *perrno, + TALLOC_CTX *mem_ctx, + struct tstream_context **stream, + struct tsocket_address **local) +#else +int _tstream_inet_tcp_connect_recv(struct tevent_req *req, + int *perrno, + TALLOC_CTX *mem_ctx, + struct tstream_context **stream, + struct tsocket_address **local, + const char *location); +#define tstream_inet_tcp_connect_recv(req, perrno, mem_ctx, stream, local) \ + _tstream_inet_tcp_connect_recv(req, perrno, mem_ctx, stream, local, \ + __location__) +#endif + +/** + * @brief Connect async to a unix domain endpoint and create a tstream_context + * for the stream based communication. + * + * Use this function to connenct asynchronously to a unix domainendpoint and + * create a tstream_context for the stream based communication. + * + * The callback is triggered when a socket is connected and ready for IO or an + * error happened. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] local An 'unix' tsocket_address for the local endpoint. + * + * @param[in] remote An 'unix' tsocket_address for the remote endpoint. + * + * @return A 'tevent_req' handle, where the caller can register a + * callback with tevent_req_set_callback(). NULL on a falal + * error. + * + * @see tstream_unix_connect_recv() + */ +struct tevent_req * tstream_unix_connect_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + const struct tsocket_address *local, + const struct tsocket_address *remote); + +#ifdef DOXYGEN +/** + * @brief Receive the result from a tstream_unix_connect_send(). + * + * @param[in] req The tevent request from tstream_inet_tcp_connect_send(). + * + * @param[out] perrno The error number, set if an error occurred. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] stream The tstream context to work on. + * + * @return 0 on success, -1 on error with perrno set. + */ +int tstream_unix_connect_recv(struct tevent_req *req, + int *perrno, + TALLOC_CTX *mem_ctx, + struct tstream_context **stream); +#else +int _tstream_unix_connect_recv(struct tevent_req *req, + int *perrno, + TALLOC_CTX *mem_ctx, + struct tstream_context **stream, + const char *location); +#define tstream_unix_connect_recv(req, perrno, mem_ctx, stream) \ + _tstream_unix_connect_recv(req, perrno, mem_ctx, stream, \ + __location__) +#endif + +#ifdef DOXYGEN +/** + * @brief Create two connected 'unix' tsocket_contexts for stream based + * communication. + * + * @param[in] mem_ctx1 The talloc memory context to use for stream1. + * + * @param[in] stream1 The first stream to connect. + * + * @param[in] mem_ctx2 The talloc memory context to use for stream2. + * + * @param[in] stream2 The second stream to connect. + * + * @return 0 on success, -1 on error with errno set. + */ +int tstream_unix_socketpair(TALLOC_CTX *mem_ctx1, + struct tstream_context **stream1, + TALLOC_CTX *mem_ctx2, + struct tstream_context **stream2); +#else +int _tstream_unix_socketpair(TALLOC_CTX *mem_ctx1, + struct tstream_context **_stream1, + TALLOC_CTX *mem_ctx2, + struct tstream_context **_stream2, + const char *location); + +#define tstream_unix_socketpair(mem_ctx1, stream1, mem_ctx2, stream2) \ + _tstream_unix_socketpair(mem_ctx1, stream1, mem_ctx2, stream2, \ + __location__) +#endif + +struct sockaddr; + +#ifdef DOXYGEN +/** + * @brief Convert a tsocket address to a bsd socket address. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] sa The sockaddr structure to convert. + * + * @param[in] sa_socklen The length of the sockaddr structure. + * + * @param[out] addr The tsocket pointer to allocate and fill. + * + * @return 0 on success, -1 on error with errno set. + */ +int tsocket_address_bsd_from_sockaddr(TALLOC_CTX *mem_ctx, + const struct sockaddr *sa, + size_t sa_socklen, + struct tsocket_address **addr); +#else +int _tsocket_address_bsd_from_sockaddr(TALLOC_CTX *mem_ctx, + const struct sockaddr *sa, + size_t sa_socklen, + struct tsocket_address **_addr, + const char *location); + +#define tsocket_address_bsd_from_sockaddr(mem_ctx, sa, sa_socklen, _addr) \ + _tsocket_address_bsd_from_sockaddr(mem_ctx, sa, sa_socklen, _addr, \ + __location__) +#endif + +#ifdef DOXYGEN +/** + * @brief Convert a samba address to a tsocket address. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] s_addr The samba address structure to convert. + * + * @param[out] t_addr The tsocket pointer to allocate and fill. + * + * @return 0 on success, -1 on error with errno set. + */ +int tsocket_address_bsd_from_samba_sockaddr(TALLOC_CTX *mem_ctx, + const struct samba_sockaddr *xs_addr, + struct tsocket_address **t_addr); +#else +int _tsocket_address_bsd_from_samba_sockaddr(TALLOC_CTX *mem_ctx, + const struct samba_sockaddr *xs_addr, + struct tsocket_address **t_addr, + const char *location); + +#define tsocket_address_bsd_from_samba_sockaddr(mem_ctx, xs_addr, t_addr) \ + _tsocket_address_bsd_from_samba_sockaddr(mem_ctx, xs_addr, t_addr, \ + __location__) +#endif + +/** + * @brief Fill a bsd sockaddr structure. + * + * @param[in] addr The tsocket address structure to use. + * + * @param[in] sa The bsd sockaddr structure to fill out. + * + * @param[in] sa_socklen The length of the bsd sockaddr structure to fill out. + * + * @return The actual size of the sockaddr structure, -1 on error + * with errno set. The size could differ from sa_socklen. + * + * @code + * ssize_t socklen; + * struct sockaddr_storage ss; + * + * socklen = tsocket_address_bsd_sockaddr(taddr, + * (struct sockaddr *) &ss, + * sizeof(struct sockaddr_storage)); + * if (socklen < 0) { + * return -1; + * } + * @endcode + */ +ssize_t tsocket_address_bsd_sockaddr(const struct tsocket_address *addr, + struct sockaddr *sa, + size_t sa_socklen); + +#ifdef DOXYGEN +/** + * @brief Wrap an existing file descriptors into the tstream abstraction. + * + * You can use this function to wrap an existing file descriptors into the + * tstream abstraction. After that you're not able to use this file descriptor + * for anything else. The file descriptor will be closed when the stream gets + * freed. If you still want to use the fd you have have to create a duplicate. + * + * @param[in] mem_ctx The talloc memory context to use. + * + * @param[in] fd The non blocking fd to use! + * + * @param[out] stream A pointer to store an allocated tstream_context. + * + * @return 0 on success, -1 on error. + * + * Example: + * @code + * fd2 = dup(fd); + * rc = tstream_bsd_existing_socket(mem_ctx, fd2, &tstream); + * if (rc < 0) { + * stream_terminate_connection(conn, "named_pipe_accept: out of memory"); + * return; + * } + * @endcode + * + * @warning This is an internal function. You should read the code to fully + * understand it if you plan to use it. + */ +int tstream_bsd_existing_socket(TALLOC_CTX *mem_ctx, + int fd, + struct tstream_context **stream); +#else +int _tstream_bsd_existing_socket(TALLOC_CTX *mem_ctx, + int fd, + struct tstream_context **_stream, + const char *location); +#define tstream_bsd_existing_socket(mem_ctx, fd, stream) \ + _tstream_bsd_existing_socket(mem_ctx, fd, stream, \ + __location__) +#endif + +/** + * @} + */ + +/** + * @defgroup tsocket_helper Queue and PDU helpers + * @ingroup tsocket + * + * In order to make the live easier for callers which want to implement a + * function to receive a full PDU with a single async function pair, there're + * some helper functions. + * + * There're some cases where the caller wants doesn't care about the order of + * doing IO on the abstracted sockets. + * + * @{ + */ + +/** + * @brief Queue a dgram blob for sending through the socket. + * + * This function queues a blob for sending to destination through an existing + * dgram socket. The async callback is triggered when the whole blob is + * delivered to the underlying system socket. + * + * The caller needs to make sure that all non-scalar input parameters hang + * around for the whole lifetime of the request. + * + * @param[in] mem_ctx The memory context for the result. + * + * @param[in] ev The event context the operation should work on. + * + * @param[in] dgram The tdgram_context to send the message buffer. + * + * @param[in] queue The existing dgram queue. + * + * @param[in] buf The message buffer to send. + * + * @param[in] len The message length. + * + * @param[in] dst The destination socket address. + * + * @return The async request handle. NULL on fatal error. + * + * @see tdgram_sendto_queue_recv() + */ +struct tevent_req *tdgram_sendto_queue_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tdgram_context *dgram, + struct tevent_queue *queue, + const uint8_t *buf, + size_t len, + struct tsocket_address *dst); + +/** + * @brief Receive the result of the sent dgram blob. + * + * @param[in] req The tevent request from tdgram_sendto_queue_send(). + * + * @param[out] perrno The error set to the actual errno. + * + * @return The length of the datagram (0 is never returned!), -1 on + * error with perrno set to the actual errno. + */ +ssize_t tdgram_sendto_queue_recv(struct tevent_req *req, int *perrno); + +typedef int (*tstream_readv_pdu_next_vector_t)(struct tstream_context *stream, + void *private_data, + TALLOC_CTX *mem_ctx, + struct iovec **vector, + size_t *count); + +struct tevent_req *tstream_readv_pdu_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tstream_context *stream, + tstream_readv_pdu_next_vector_t next_vector_fn, + void *next_vector_private); +int tstream_readv_pdu_recv(struct tevent_req *req, int *perrno); + +/** + * @brief Queue a read request for a PDU on the socket. + * + * This function queues a read request for a PDU on a stream socket. The async + * callback is triggered when a full PDU has been read from the socket. + * + * The caller needs to make sure that all non-scalar input parameters hang + * around for the whole lifetime of the request. + * + * @param[in] mem_ctx The memory context for the result + * + * @param[in] ev The tevent_context to run on + * + * @param[in] stream The stream to send data through + * + * @param[in] queue The existing send queue + * + * @param[in] next_vector_fn The next vector function + * + * @param[in] next_vector_private The private_data of the next vector function + * + * @return The async request handle. NULL on fatal error. + * + * @see tstream_readv_pdu_queue_recv() + */ +struct tevent_req *tstream_readv_pdu_queue_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tstream_context *stream, + struct tevent_queue *queue, + tstream_readv_pdu_next_vector_t next_vector_fn, + void *next_vector_private); + +/** + * @brief Receive the PDU blob read from the stream. + * + * @param[in] req The tevent request from tstream_readv_pdu_queue_send(). + * + * @param[out] perrno The error set to the actual errno. + * + * @return The number of bytes read on success, -1 on error with + * perrno set to the actual errno. + */ +int tstream_readv_pdu_queue_recv(struct tevent_req *req, int *perrno); + +/** + * @brief Queue an iovector for sending through the socket + * + * This function queues an iovector for sending to destination through an + * existing stream socket. The async callback is triggered when the whole + * vectror has been delivered to the underlying system socket. + * + * The caller needs to make sure that all non-scalar input parameters hang + * around for the whole lifetime of the request. + * + * @param[in] mem_ctx The memory context for the result. + * + * @param[in] ev The tevent_context to run on. + * + * @param[in] stream The stream to send data through. + * + * @param[in] queue The existing send queue. + * + * @param[in] vector The iovec vector so write. + * + * @param[in] count The size of the vector. + * + * @return The async request handle. NULL on fatal error. + */ +struct tevent_req *tstream_writev_queue_send(TALLOC_CTX *mem_ctx, + struct tevent_context *ev, + struct tstream_context *stream, + struct tevent_queue *queue, + const struct iovec *vector, + size_t count); + +/** + * @brief Receive the result of the sent iovector. + * + * @param[in] req The tevent request from tstream_writev_queue_send(). + * + * @param[out] perrno The error set to the actual errno. + * + * @return The length of the iovector (0 is never returned!), -1 on + * error with perrno set to the actual errno. + */ +int tstream_writev_queue_recv(struct tevent_req *req, int *perrno); + +/** + * @} + */ + +#endif /* _TSOCKET_H */ + -- cgit v1.2.3