Adding upstream version 3.40.1.upstream/3.40.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 7738 insertions, 0 deletions

diff --git a/src/pager.c b/src/pager.c
new file mode 100644
index 0000000..883e653
--- /dev/null
+++ b/src/pager.c
@@ -0,0 +1,7738 @@
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+*************************************************************************
+** This is the implementation of the page cache subsystem or "pager".
+** 
+** The pager is used to access a database disk file.  It implements
+** atomic commit and rollback through the use of a journal file that
+** is separate from the database file.  The pager also implements file
+** locking to prevent two processes from writing the same database
+** file simultaneously, or one process from reading the database while
+** another is writing.
+*/
+#ifndef SQLITE_OMIT_DISKIO
+#include "sqliteInt.h"
+#include "wal.h"
+
+
+/******************* NOTES ON THE DESIGN OF THE PAGER ************************
+**
+** This comment block describes invariants that hold when using a rollback
+** journal.  These invariants do not apply for journal_mode=WAL,
+** journal_mode=MEMORY, or journal_mode=OFF.
+**
+** Within this comment block, a page is deemed to have been synced
+** automatically as soon as it is written when PRAGMA synchronous=OFF.
+** Otherwise, the page is not synced until the xSync method of the VFS
+** is called successfully on the file containing the page.
+**
+** Definition:  A page of the database file is said to be "overwriteable" if
+** one or more of the following are true about the page:
+** 
+**     (a)  The original content of the page as it was at the beginning of
+**          the transaction has been written into the rollback journal and
+**          synced.
+** 
+**     (b)  The page was a freelist leaf page at the start of the transaction.
+** 
+**     (c)  The page number is greater than the largest page that existed in
+**          the database file at the start of the transaction.
+** 
+** (1) A page of the database file is never overwritten unless one of the
+**     following are true:
+** 
+**     (a) The page and all other pages on the same sector are overwriteable.
+** 
+**     (b) The atomic page write optimization is enabled, and the entire
+**         transaction other than the update of the transaction sequence
+**         number consists of a single page change.
+** 
+** (2) The content of a page written into the rollback journal exactly matches
+**     both the content in the database when the rollback journal was written
+**     and the content in the database at the beginning of the current
+**     transaction.
+** 
+** (3) Writes to the database file are an integer multiple of the page size
+**     in length and are aligned on a page boundary.
+** 
+** (4) Reads from the database file are either aligned on a page boundary and
+**     an integer multiple of the page size in length or are taken from the
+**     first 100 bytes of the database file.
+** 
+** (5) All writes to the database file are synced prior to the rollback journal
+**     being deleted, truncated, or zeroed.
+** 
+** (6) If a super-journal file is used, then all writes to the database file
+**     are synced prior to the super-journal being deleted.
+** 
+** Definition: Two databases (or the same database at two points it time)
+** are said to be "logically equivalent" if they give the same answer to
+** all queries.  Note in particular the content of freelist leaf
+** pages can be changed arbitrarily without affecting the logical equivalence
+** of the database.
+** 
+** (7) At any time, if any subset, including the empty set and the total set,
+**     of the unsynced changes to a rollback journal are removed and the 
+**     journal is rolled back, the resulting database file will be logically
+**     equivalent to the database file at the beginning of the transaction.
+** 
+** (8) When a transaction is rolled back, the xTruncate method of the VFS
+**     is called to restore the database file to the same size it was at
+**     the beginning of the transaction.  (In some VFSes, the xTruncate
+**     method is a no-op, but that does not change the fact the SQLite will
+**     invoke it.)
+** 
+** (9) Whenever the database file is modified, at least one bit in the range
+**     of bytes from 24 through 39 inclusive will be changed prior to releasing
+**     the EXCLUSIVE lock, thus signaling other connections on the same
+**     database to flush their caches.
+**
+** (10) The pattern of bits in bytes 24 through 39 shall not repeat in less
+**      than one billion transactions.
+**
+** (11) A database file is well-formed at the beginning and at the conclusion
+**      of every transaction.
+**
+** (12) An EXCLUSIVE lock is held on the database file when writing to
+**      the database file.
+**
+** (13) A SHARED lock is held on the database file while reading any
+**      content out of the database file.
+**
+******************************************************************************/
+
+/*
+** Macros for troubleshooting.  Normally turned off
+*/
+#if 0
+int sqlite3PagerTrace=1;  /* True to enable tracing */
+#define sqlite3DebugPrintf printf
+#define PAGERTRACE(X)     if( sqlite3PagerTrace ){ sqlite3DebugPrintf X; }
+#else
+#define PAGERTRACE(X)
+#endif
+
+/*
+** The following two macros are used within the PAGERTRACE() macros above
+** to print out file-descriptors. 
+**
+** PAGERID() takes a pointer to a Pager struct as its argument. The
+** associated file-descriptor is returned. FILEHANDLEID() takes an sqlite3_file
+** struct as its argument.
+*/
+#define PAGERID(p) (SQLITE_PTR_TO_INT(p->fd))
+#define FILEHANDLEID(fd) (SQLITE_PTR_TO_INT(fd))
+
+/*
+** The Pager.eState variable stores the current 'state' of a pager. A
+** pager may be in any one of the seven states shown in the following
+** state diagram.
+**
+**                            OPEN <------+------+
+**                              |         |      |
+**                              V         |      |
+**               +---------> READER-------+      |
+**               |              |                |
+**               |              V                |
+**               |<-------WRITER_LOCKED------> ERROR
+**               |              |                ^  
+**               |              V                |
+**               |<------WRITER_CACHEMOD-------->|
+**               |              |                |
+**               |              V                |
+**               |<-------WRITER_DBMOD---------->|
+**               |              |                |
+**               |              V                |
+**               +<------WRITER_FINISHED-------->+
+**
+**
+** List of state transitions and the C [function] that performs each:
+** 
+**   OPEN              -> READER              [sqlite3PagerSharedLock]
+**   READER            -> OPEN                [pager_unlock]
+**
+**   READER            -> WRITER_LOCKED       [sqlite3PagerBegin]
+**   WRITER_LOCKED     -> WRITER_CACHEMOD     [pager_open_journal]
+**   WRITER_CACHEMOD   -> WRITER_DBMOD        [syncJournal]
+**   WRITER_DBMOD      -> WRITER_FINISHED     [sqlite3PagerCommitPhaseOne]
+**   WRITER_***        -> READER              [pager_end_transaction]
+**
+**   WRITER_***        -> ERROR               [pager_error]
+**   ERROR             -> OPEN                [pager_unlock]
+** 
+**
+**  OPEN:
+**
+**    The pager starts up in this state. Nothing is guaranteed in this
+**    state - the file may or may not be locked and the database size is
+**    unknown. The database may not be read or written.
+**
+**    * No read or write transaction is active.
+**    * Any lock, or no lock at all, may be held on the database file.
+**    * The dbSize, dbOrigSize and dbFileSize variables may not be trusted.
+**
+**  READER:
+**
+**    In this state all the requirements for reading the database in 
+**    rollback (non-WAL) mode are met. Unless the pager is (or recently
+**    was) in exclusive-locking mode, a user-level read transaction is 
+**    open. The database size is known in this state.
+**
+**    A connection running with locking_mode=normal enters this state when
+**    it opens a read-transaction on the database and returns to state
+**    OPEN after the read-transaction is completed. However a connection
+**    running in locking_mode=exclusive (including temp databases) remains in
+**    this state even after the read-transaction is closed. The only way
+**    a locking_mode=exclusive connection can transition from READER to OPEN
+**    is via the ERROR state (see below).
+** 
+**    * A read transaction may be active (but a write-transaction cannot).
+**    * A SHARED or greater lock is held on the database file.
+**    * The dbSize variable may be trusted (even if a user-level read 
+**      transaction is not active). The dbOrigSize and dbFileSize variables
+**      may not be trusted at this point.
+**    * If the database is a WAL database, then the WAL connection is open.
+**    * Even if a read-transaction is not open, it is guaranteed that 
+**      there is no hot-journal in the file-system.
+**
+**  WRITER_LOCKED:
+**
+**    The pager moves to this state from READER when a write-transaction
+**    is first opened on the database. In WRITER_LOCKED state, all locks 
+**    required to start a write-transaction are held, but no actual 
+**    modifications to the cache or database have taken place.
+**
+**    In rollback mode, a RESERVED or (if the transaction was opened with 
+**    BEGIN EXCLUSIVE) EXCLUSIVE lock is obtained on the database file when
+**    moving to this state, but the journal file is not written to or opened 
+**    to in this state. If the transaction is committed or rolled back while 
+**    in WRITER_LOCKED state, all that is required is to unlock the database 
+**    file.
+**
+**    IN WAL mode, WalBeginWriteTransaction() is called to lock the log file.
+**    If the connection is running with locking_mode=exclusive, an attempt
+**    is made to obtain an EXCLUSIVE lock on the database file.
+**
+**    * A write transaction is active.
+**    * If the connection is open in rollback-mode, a RESERVED or greater 
+**      lock is held on the database file.
+**    * If the connection is open in WAL-mode, a WAL write transaction
+**      is open (i.e. sqlite3WalBeginWriteTransaction() has been successfully
+**      called).
+**    * The dbSize, dbOrigSize and dbFileSize variables are all valid.
+**    * The contents of the pager cache have not been modified.
+**    * The journal file may or may not be open.
+**    * Nothing (not even the first header) has been written to the journal.
+**
+**  WRITER_CACHEMOD:
+**
+**    A pager moves from WRITER_LOCKED state to this state when a page is
+**    first modified by the upper layer. In rollback mode the journal file
+**    is opened (if it is not already open) and a header written to the
+**    start of it. The database file on disk has not been modified.
+**
+**    * A write transaction is active.
+**    * A RESERVED or greater lock is held on the database file.
+**    * The journal file is open and the first header has been written 
+**      to it, but the header has not been synced to disk.
+**    * The contents of the page cache have been modified.
+**
+**  WRITER_DBMOD:
+**
+**    The pager transitions from WRITER_CACHEMOD into WRITER_DBMOD state
+**    when it modifies the contents of the database file. WAL connections
+**    never enter this state (since they do not modify the database file,
+**    just the log file).
+**
+**    * A write transaction is active.
+**    * An EXCLUSIVE or greater lock is held on the database file.
+**    * The journal file is open and the first header has been written 
+**      and synced to disk.
+**    * The contents of the page cache have been modified (and possibly
+**      written to disk).
+**
+**  WRITER_FINISHED:
+**
+**    It is not possible for a WAL connection to enter this state.
+**
+**    A rollback-mode pager changes to WRITER_FINISHED state from WRITER_DBMOD
+**    state after the entire transaction has been successfully written into the
+**    database file. In this state the transaction may be committed simply
+**    by finalizing the journal file. Once in WRITER_FINISHED state, it is 
+**    not possible to modify the database further. At this point, the upper 
+**    layer must either commit or rollback the transaction.
+**
+**    * A write transaction is active.
+**    * An EXCLUSIVE or greater lock is held on the database file.
+**    * All writing and syncing of journal and database data has finished.
+**      If no error occurred, all that remains is to finalize the journal to
+**      commit the transaction. If an error did occur, the caller will need
+**      to rollback the transaction. 
+**
+**  ERROR:
+**
+**    The ERROR state is entered when an IO or disk-full error (including
+**    SQLITE_IOERR_NOMEM) occurs at a point in the code that makes it 
+**    difficult to be sure that the in-memory pager state (cache contents, 
+**    db size etc.) are consistent with the contents of the file-system.
+**
+**    Temporary pager files may enter the ERROR state, but in-memory pagers
+**    cannot.
+**
+**    For example, if an IO error occurs while performing a rollback, 
+**    the contents of the page-cache may be left in an inconsistent state.
+**    At this point it would be dangerous to change back to READER state
+**    (as usually happens after a rollback). Any subsequent readers might
+**    report database corruption (due to the inconsistent cache), and if
+**    they upgrade to writers, they may inadvertently corrupt the database
+**    file. To avoid this hazard, the pager switches into the ERROR state
+**    instead of READER following such an error.
+**
+**    Once it has entered the ERROR state, any attempt to use the pager
+**    to read or write data returns an error. Eventually, once all 
+**    outstanding transactions have been abandoned, the pager is able to
+**    transition back to OPEN state, discarding the contents of the 
+**    page-cache and any other in-memory state at the same time. Everything
+**    is reloaded from disk (and, if necessary, hot-journal rollback peformed)
+**    when a read-transaction is next opened on the pager (transitioning
+**    the pager into READER state). At that point the system has recovered 
+**    from the error.
+**
+**    Specifically, the pager jumps into the ERROR state if:
+**
+**      1. An error occurs while attempting a rollback. This happens in
+**         function sqlite3PagerRollback().
+**
+**      2. An error occurs while attempting to finalize a journal file
+**         following a commit in function sqlite3PagerCommitPhaseTwo().
+**
+**      3. An error occurs while attempting to write to the journal or
+**         database file in function pagerStress() in order to free up
+**         memory.
+**
+**    In other cases, the error is returned to the b-tree layer. The b-tree
+**    layer then attempts a rollback operation. If the error condition 
+**    persists, the pager enters the ERROR state via condition (1) above.
+**
+**    Condition (3) is necessary because it can be triggered by a read-only
+**    statement executed within a transaction. In this case, if the error
+**    code were simply returned to the user, the b-tree layer would not
+**    automatically attempt a rollback, as it assumes that an error in a
+**    read-only statement cannot leave the pager in an internally inconsistent 
+**    state.
+**
+**    * The Pager.errCode variable is set to something other than SQLITE_OK.
+**    * There are one or more outstanding references to pages (after the
+**      last reference is dropped the pager should move back to OPEN state).
+**    * The pager is not an in-memory pager.
+**    
+**
+** Notes:
+**
+**   * A pager is never in WRITER_DBMOD or WRITER_FINISHED state if the
+**     connection is open in WAL mode. A WAL connection is always in one
+**     of the first four states.
+**
+**   * Normally, a connection open in exclusive mode is never in PAGER_OPEN
+**     state. There are two exceptions: immediately after exclusive-mode has
+**     been turned on (and before any read or write transactions are 
+**     executed), and when the pager is leaving the "error state".
+**
+**   * See also: assert_pager_state().
+*/
+#define PAGER_OPEN                  0
+#define PAGER_READER                1
+#define PAGER_WRITER_LOCKED         2
+#define PAGER_WRITER_CACHEMOD       3
+#define PAGER_WRITER_DBMOD          4
+#define PAGER_WRITER_FINISHED       5
+#define PAGER_ERROR                 6
+
+/*
+** The Pager.eLock variable is almost always set to one of the 
+** following locking-states, according to the lock currently held on
+** the database file: NO_LOCK, SHARED_LOCK, RESERVED_LOCK or EXCLUSIVE_LOCK.
+** This variable is kept up to date as locks are taken and released by
+** the pagerLockDb() and pagerUnlockDb() wrappers.
+**
+** If the VFS xLock() or xUnlock() returns an error other than SQLITE_BUSY
+** (i.e. one of the SQLITE_IOERR subtypes), it is not clear whether or not
+** the operation was successful. In these circumstances pagerLockDb() and
+** pagerUnlockDb() take a conservative approach - eLock is always updated
+** when unlocking the file, and only updated when locking the file if the
+** VFS call is successful. This way, the Pager.eLock variable may be set
+** to a less exclusive (lower) value than the lock that is actually held
+** at the system level, but it is never set to a more exclusive value.
+**
+** This is usually safe. If an xUnlock fails or appears to fail, there may 
+** be a few redundant xLock() calls or a lock may be held for longer than
+** required, but nothing really goes wrong.
+**
+** The exception is when the database file is unlocked as the pager moves
+** from ERROR to OPEN state. At this point there may be a hot-journal file 
+** in the file-system that needs to be rolled back (as part of an OPEN->SHARED
+** transition, by the same pager or any other). If the call to xUnlock()
+** fails at this point and the pager is left holding an EXCLUSIVE lock, this
+** can confuse the call to xCheckReservedLock() call made later as part
+** of hot-journal detection.
+**
+** xCheckReservedLock() is defined as returning true "if there is a RESERVED 
+** lock held by this process or any others". So xCheckReservedLock may 
+** return true because the caller itself is holding an EXCLUSIVE lock (but
+** doesn't know it because of a previous error in xUnlock). If this happens
+** a hot-journal may be mistaken for a journal being created by an active
+** transaction in another process, causing SQLite to read from the database
+** without rolling it back.
+**
+** To work around this, if a call to xUnlock() fails when unlocking the
+** database in the ERROR state, Pager.eLock is set to UNKNOWN_LOCK. It
+** is only changed back to a real locking state after a successful call
+** to xLock(EXCLUSIVE). Also, the code to do the OPEN->SHARED state transition
+** omits the check for a hot-journal if Pager.eLock is set to UNKNOWN_LOCK 
+** lock. Instead, it assumes a hot-journal exists and obtains an EXCLUSIVE
+** lock on the database file before attempting to roll it back. See function
+** PagerSharedLock() for more detail.
+**
+** Pager.eLock may only be set to UNKNOWN_LOCK when the pager is in 
+** PAGER_OPEN state.
+*/
+#define UNKNOWN_LOCK                (EXCLUSIVE_LOCK+1)
+
+/*
+** The maximum allowed sector size. 64KiB. If the xSectorsize() method 
+** returns a value larger than this, then MAX_SECTOR_SIZE is used instead.
+** This could conceivably cause corruption following a power failure on
+** such a system. This is currently an undocumented limit.
+*/
+#define MAX_SECTOR_SIZE 0x10000
+
+
+/*
+** An instance of the following structure is allocated for each active
+** savepoint and statement transaction in the system. All such structures
+** are stored in the Pager.aSavepoint[] array, which is allocated and
+** resized using sqlite3Realloc().
+**
+** When a savepoint is created, the PagerSavepoint.iHdrOffset field is
+** set to 0. If a journal-header is written into the main journal while
+** the savepoint is active, then iHdrOffset is set to the byte offset 
+** immediately following the last journal record written into the main
+** journal before the journal-header. This is required during savepoint
+** rollback (see pagerPlaybackSavepoint()).
+*/
+typedef struct PagerSavepoint PagerSavepoint;
+struct PagerSavepoint {
+  i64 iOffset;                 /* Starting offset in main journal */
+  i64 iHdrOffset;              /* See above */
+  Bitvec *pInSavepoint;        /* Set of pages in this savepoint */
+  Pgno nOrig;                  /* Original number of pages in file */
+  Pgno iSubRec;                /* Index of first record in sub-journal */
+  int bTruncateOnRelease;      /* If stmt journal may be truncated on RELEASE */
+#ifndef SQLITE_OMIT_WAL
+  u32 aWalData[WAL_SAVEPOINT_NDATA];        /* WAL savepoint context */
+#endif
+};
+
+/*
+** Bits of the Pager.doNotSpill flag.  See further description below.
+*/
+#define SPILLFLAG_OFF         0x01 /* Never spill cache.  Set via pragma */
+#define SPILLFLAG_ROLLBACK    0x02 /* Current rolling back, so do not spill */
+#define SPILLFLAG_NOSYNC      0x04 /* Spill is ok, but do not sync */
+
+/*
+** An open page cache is an instance of struct Pager. A description of
+** some of the more important member variables follows:
+**
+** eState
+**
+**   The current 'state' of the pager object. See the comment and state
+**   diagram above for a description of the pager state.
+**
+** eLock
+**
+**   For a real on-disk database, the current lock held on the database file -
+**   NO_LOCK, SHARED_LOCK, RESERVED_LOCK or EXCLUSIVE_LOCK.
+**
+**   For a temporary or in-memory database (neither of which require any
+**   locks), this variable is always set to EXCLUSIVE_LOCK. Since such
+**   databases always have Pager.exclusiveMode==1, this tricks the pager
+**   logic into thinking that it already has all the locks it will ever
+**   need (and no reason to release them).
+**
+**   In some (obscure) circumstances, this variable may also be set to
+**   UNKNOWN_LOCK. See the comment above the #define of UNKNOWN_LOCK for
+**   details.
+**
+** changeCountDone
+**
+**   This boolean variable is used to make sure that the change-counter 
+**   (the 4-byte header field at byte offset 24 of the database file) is 
+**   not updated more often than necessary. 
+**
+**   It is set to true when the change-counter field is updated, which 
+**   can only happen if an exclusive lock is held on the database file.
+**   It is cleared (set to false) whenever an exclusive lock is 
+**   relinquished on the database file. Each time a transaction is committed,
+**   The changeCountDone flag is inspected. If it is true, the work of
+**   updating the change-counter is omitted for the current transaction.
+**
+**   This mechanism means that when running in exclusive mode, a connection 
+**   need only update the change-counter once, for the first transaction
+**   committed.
+**
+** setSuper
+**
+**   When PagerCommitPhaseOne() is called to commit a transaction, it may
+**   (or may not) specify a super-journal name to be written into the 
+**   journal file before it is synced to disk.
+**
+**   Whether or not a journal file contains a super-journal pointer affects 
+**   the way in which the journal file is finalized after the transaction is 
+**   committed or rolled back when running in "journal_mode=PERSIST" mode.
+**   If a journal file does not contain a super-journal pointer, it is
+**   finalized by overwriting the first journal header with zeroes. If
+**   it does contain a super-journal pointer the journal file is finalized 
+**   by truncating it to zero bytes, just as if the connection were 
+**   running in "journal_mode=truncate" mode.
+**
+**   Journal files that contain super-journal pointers cannot be finalized
+**   simply by overwriting the first journal-header with zeroes, as the
+**   super-journal pointer could interfere with hot-journal rollback of any
+**   subsequently interrupted transaction that reuses the journal file.
+**
+**   The flag is cleared as soon as the journal file is finalized (either
+**   by PagerCommitPhaseTwo or PagerRollback). If an IO error prevents the
+**   journal file from being successfully finalized, the setSuper flag
+**   is cleared anyway (and the pager will move to ERROR state).
+**
+** doNotSpill
+**
+**   This variables control the behavior of cache-spills  (calls made by
+**   the pcache module to the pagerStress() routine to write cached data
+**   to the file-system in order to free up memory).
+**
+**   When bits SPILLFLAG_OFF or SPILLFLAG_ROLLBACK of doNotSpill are set,
+**   writing to the database from pagerStress() is disabled altogether.
+**   The SPILLFLAG_ROLLBACK case is done in a very obscure case that
+**   comes up during savepoint rollback that requires the pcache module
+**   to allocate a new page to prevent the journal file from being written
+**   while it is being traversed by code in pager_playback().  The SPILLFLAG_OFF
+**   case is a user preference.
+** 
+**   If the SPILLFLAG_NOSYNC bit is set, writing to the database from
+**   pagerStress() is permitted, but syncing the journal file is not.
+**   This flag is set by sqlite3PagerWrite() when the file-system sector-size
+**   is larger than the database page-size in order to prevent a journal sync
+**   from happening in between the journalling of two pages on the same sector. 
+**
+** subjInMemory
+**
+**   This is a boolean variable. If true, then any required sub-journal
+**   is opened as an in-memory journal file. If false, then in-memory
+**   sub-journals are only used for in-memory pager files.
+**
+**   This variable is updated by the upper layer each time a new 
+**   write-transaction is opened.
+**
+** dbSize, dbOrigSize, dbFileSize
+**
+**   Variable dbSize is set to the number of pages in the database file.
+**   It is valid in PAGER_READER and higher states (all states except for
+**   OPEN and ERROR). 
+**
+**   dbSize is set based on the size of the database file, which may be 
+**   larger than the size of the database (the value stored at offset
+**   28 of the database header by the btree). If the size of the file
+**   is not an integer multiple of the page-size, the value stored in
+**   dbSize is rounded down (i.e. a 5KB file with 2K page-size has dbSize==2).
+**   Except, any file that is greater than 0 bytes in size is considered
+**   to have at least one page. (i.e. a 1KB file with 2K page-size leads
+**   to dbSize==1).
+**
+**   During a write-transaction, if pages with page-numbers greater than
+**   dbSize are modified in the cache, dbSize is updated accordingly.
+**   Similarly, if the database is truncated using PagerTruncateImage(), 
+**   dbSize is updated.
+**
+**   Variables dbOrigSize and dbFileSize are valid in states 
+**   PAGER_WRITER_LOCKED and higher. dbOrigSize is a copy of the dbSize
+**   variable at the start of the transaction. It is used during rollback,
+**   and to determine whether or not pages need to be journalled before
+**   being modified.
+**
+**   Throughout a write-transaction, dbFileSize contains the size of
+**   the file on disk in pages. It is set to a copy of dbSize when the
+**   write-transaction is first opened, and updated when VFS calls are made
+**   to write or truncate the database file on disk. 
+**
+**   The only reason the dbFileSize variable is required is to suppress 
+**   unnecessary calls to xTruncate() after committing a transaction. If, 
+**   when a transaction is committed, the dbFileSize variable indicates 
+**   that the database file is larger than the database image (Pager.dbSize), 
+**   pager_truncate() is called. The pager_truncate() call uses xFilesize()
+**   to measure the database file on disk, and then truncates it if required.
+**   dbFileSize is not used when rolling back a transaction. In this case
+**   pager_truncate() is called unconditionally (which means there may be
+**   a call to xFilesize() that is not strictly required). In either case,
+**   pager_truncate() may cause the file to become smaller or larger.
+**
+** dbHintSize
+**
+**   The dbHintSize variable is used to limit the number of calls made to
+**   the VFS xFileControl(FCNTL_SIZE_HINT) method. 
+**
+**   dbHintSize is set to a copy of the dbSize variable when a
+**   write-transaction is opened (at the same time as dbFileSize and
+**   dbOrigSize). If the xFileControl(FCNTL_SIZE_HINT) method is called,
+**   dbHintSize is increased to the number of pages that correspond to the
+**   size-hint passed to the method call. See pager_write_pagelist() for 
+**   details.
+**
+** errCode
+**
+**   The Pager.errCode variable is only ever used in PAGER_ERROR state. It
+**   is set to zero in all other states. In PAGER_ERROR state, Pager.errCode 
+**   is always set to SQLITE_FULL, SQLITE_IOERR or one of the SQLITE_IOERR_XXX 
+**   sub-codes.
+**
+** syncFlags, walSyncFlags
+**
+**   syncFlags is either SQLITE_SYNC_NORMAL (0x02) or SQLITE_SYNC_FULL (0x03).
+**   syncFlags is used for rollback mode.  walSyncFlags is used for WAL mode
+**   and contains the flags used to sync the checkpoint operations in the
+**   lower two bits, and sync flags used for transaction commits in the WAL
+**   file in bits 0x04 and 0x08.  In other words, to get the correct sync flags
+**   for checkpoint operations, use (walSyncFlags&0x03) and to get the correct
+**   sync flags for transaction commit, use ((walSyncFlags>>2)&0x03).  Note
+**   that with synchronous=NORMAL in WAL mode, transaction commit is not synced
+**   meaning that the 0x04 and 0x08 bits are both zero.
+*/
+struct Pager {
+  sqlite3_vfs *pVfs;          /* OS functions to use for IO */
+  u8 exclusiveMode;           /* Boolean. True if locking_mode==EXCLUSIVE */
+  u8 journalMode;             /* One of the PAGER_JOURNALMODE_* values */
+  u8 useJournal;              /* Use a rollback journal on this file */
+  u8 noSync;                  /* Do not sync the journal if true */
+  u8 fullSync;                /* Do extra syncs of the journal for robustness */
+  u8 extraSync;               /* sync directory after journal delete */
+  u8 syncFlags;               /* SYNC_NORMAL or SYNC_FULL otherwise */
+  u8 walSyncFlags;            /* See description above */
+  u8 tempFile;                /* zFilename is a temporary or immutable file */
+  u8 noLock;                  /* Do not lock (except in WAL mode) */
+  u8 readOnly;                /* True for a read-only database */
+  u8 memDb;                   /* True to inhibit all file I/O */
+  u8 memVfs;                  /* VFS-implemented memory database */
+
+  /**************************************************************************
+  ** The following block contains those class members that change during
+  ** routine operation.  Class members not in this block are either fixed
+  ** when the pager is first created or else only change when there is a
+  ** significant mode change (such as changing the page_size, locking_mode,
+  ** or the journal_mode).  From another view, these class members describe
+  ** the "state" of the pager, while other class members describe the
+  ** "configuration" of the pager.
+  */
+  u8 eState;                  /* Pager state (OPEN, READER, WRITER_LOCKED..) */
+  u8 eLock;                   /* Current lock held on database file */
+  u8 changeCountDone;         /* Set after incrementing the change-counter */
+  u8 setSuper;                /* Super-jrnl name is written into jrnl */
+  u8 doNotSpill;              /* Do not spill the cache when non-zero */
+  u8 subjInMemory;            /* True to use in-memory sub-journals */
+  u8 bUseFetch;               /* True to use xFetch() */
+  u8 hasHeldSharedLock;       /* True if a shared lock has ever been held */
+  Pgno dbSize;                /* Number of pages in the database */
+  Pgno dbOrigSize;            /* dbSize before the current transaction */
+  Pgno dbFileSize;            /* Number of pages in the database file */
+  Pgno dbHintSize;            /* Value passed to FCNTL_SIZE_HINT call */
+  int errCode;                /* One of several kinds of errors */
+  int nRec;                   /* Pages journalled since last j-header written */
+  u32 cksumInit;              /* Quasi-random value added to every checksum */
+  u32 nSubRec;                /* Number of records written to sub-journal */
+  Bitvec *pInJournal;         /* One bit for each page in the database file */
+  sqlite3_file *fd;           /* File descriptor for database */
+  sqlite3_file *jfd;          /* File descriptor for main journal */
+  sqlite3_file *sjfd;         /* File descriptor for sub-journal */
+  i64 journalOff;             /* Current write offset in the journal file */
+  i64 journalHdr;             /* Byte offset to previous journal header */
+  sqlite3_backup *pBackup;    /* Pointer to list of ongoing backup processes */
+  PagerSavepoint *aSavepoint; /* Array of active savepoints */
+  int nSavepoint;             /* Number of elements in aSavepoint[] */
+  u32 iDataVersion;           /* Changes whenever database content changes */
+  char dbFileVers[16];        /* Changes whenever database file changes */
+
+  int nMmapOut;               /* Number of mmap pages currently outstanding */
+  sqlite3_int64 szMmap;       /* Desired maximum mmap size */
+  PgHdr *pMmapFreelist;       /* List of free mmap page headers (pDirty) */
+  /*
+  ** End of the routinely-changing class members
+  ***************************************************************************/
+
+  u16 nExtra;                 /* Add this many bytes to each in-memory page */
+  i16 nReserve;               /* Number of unused bytes at end of each page */
+  u32 vfsFlags;               /* Flags for sqlite3_vfs.xOpen() */
+  u32 sectorSize;             /* Assumed sector size during rollback */
+  Pgno mxPgno;                /* Maximum allowed size of the database */
+  Pgno lckPgno;               /* Page number for the locking page */
+  i64 pageSize;               /* Number of bytes in a page */
+  i64 journalSizeLimit;       /* Size limit for persistent journal files */
+  char *zFilename;            /* Name of the database file */
+  char *zJournal;             /* Name of the journal file */
+  int (*xBusyHandler)(void*); /* Function to call when busy */
+  void *pBusyHandlerArg;      /* Context argument for xBusyHandler */
+  int aStat[4];               /* Total cache hits, misses, writes, spills */
+#ifdef SQLITE_TEST
+  int nRead;                  /* Database pages read */
+#endif
+  void (*xReiniter)(DbPage*); /* Call this routine when reloading pages */
+  int (*xGet)(Pager*,Pgno,DbPage**,int); /* Routine to fetch a patch */
+  char *pTmpSpace;            /* Pager.pageSize bytes of space for tmp use */
+  PCache *pPCache;            /* Pointer to page cache object */
+#ifndef SQLITE_OMIT_WAL
+  Wal *pWal;                  /* Write-ahead log used by "journal_mode=wal" */
+  char *zWal;                 /* File name for write-ahead log */
+#endif
+};
+
+/*
+** Indexes for use with Pager.aStat[]. The Pager.aStat[] array contains
+** the values accessed by passing SQLITE_DBSTATUS_CACHE_HIT, CACHE_MISS 
+** or CACHE_WRITE to sqlite3_db_status().
+*/
+#define PAGER_STAT_HIT   0
+#define PAGER_STAT_MISS  1
+#define PAGER_STAT_WRITE 2
+#define PAGER_STAT_SPILL 3
+
+/*
+** The following global variables hold counters used for
+** testing purposes only.  These variables do not exist in
+** a non-testing build.  These variables are not thread-safe.
+*/
+#ifdef SQLITE_TEST
+int sqlite3_pager_readdb_count = 0;    /* Number of full pages read from DB */
+int sqlite3_pager_writedb_count = 0;   /* Number of full pages written to DB */
+int sqlite3_pager_writej_count = 0;    /* Number of pages written to journal */
+# define PAGER_INCR(v)  v++
+#else
+# define PAGER_INCR(v)
+#endif
+
+
+
+/*
+** Journal files begin with the following magic string.  The data
+** was obtained from /dev/random.  It is used only as a sanity check.
+**
+** Since version 2.8.0, the journal format contains additional sanity
+** checking information.  If the power fails while the journal is being
+** written, semi-random garbage data might appear in the journal
+** file after power is restored.  If an attempt is then made
+** to roll the journal back, the database could be corrupted.  The additional
+** sanity checking data is an attempt to discover the garbage in the
+** journal and ignore it.
+**
+** The sanity checking information for the new journal format consists
+** of a 32-bit checksum on each page of data.  The checksum covers both
+** the page number and the pPager->pageSize bytes of data for the page.
+** This cksum is initialized to a 32-bit random value that appears in the
+** journal file right after the header.  The random initializer is important,
+** because garbage data that appears at the end of a journal is likely
+** data that was once in other files that have now been deleted.  If the
+** garbage data came from an obsolete journal file, the checksums might
+** be correct.  But by initializing the checksum to random value which
+** is different for every journal, we minimize that risk.
+*/
+static const unsigned char aJournalMagic[] = {
+  0xd9, 0xd5, 0x05, 0xf9, 0x20, 0xa1, 0x63, 0xd7,
+};
+
+/*
+** The size of the of each page record in the journal is given by
+** the following macro.
+*/
+#define JOURNAL_PG_SZ(pPager)  ((pPager->pageSize) + 8)
+
+/*
+** The journal header size for this pager. This is usually the same 
+** size as a single disk sector. See also setSectorSize().
+*/
+#define JOURNAL_HDR_SZ(pPager) (pPager->sectorSize)
+
+/*
+** The macro MEMDB is true if we are dealing with an in-memory database.
+** We do this as a macro so that if the SQLITE_OMIT_MEMORYDB macro is set,
+** the value of MEMDB will be a constant and the compiler will optimize
+** out code that would never execute.
+*/
+#ifdef SQLITE_OMIT_MEMORYDB
+# define MEMDB 0
+#else
+# define MEMDB pPager->memDb
+#endif
+
+/*
+** The macro USEFETCH is true if we are allowed to use the xFetch and xUnfetch
+** interfaces to access the database using memory-mapped I/O.
+*/
+#if SQLITE_MAX_MMAP_SIZE>0
+# define USEFETCH(x) ((x)->bUseFetch)
+#else
+# define USEFETCH(x) 0
+#endif
+
+/*
+** The argument to this macro is a file descriptor (type sqlite3_file*).
+** Return 0 if it is not open, or non-zero (but not 1) if it is.
+**
+** This is so that expressions can be written as:
+**
+**   if( isOpen(pPager->jfd) ){ ...
+**
+** instead of
+**
+**   if( pPager->jfd->pMethods ){ ...
+*/
+#define isOpen(pFd) ((pFd)->pMethods!=0)
+
+#ifdef SQLITE_DIRECT_OVERFLOW_READ
+/*
+** Return true if page pgno can be read directly from the database file
+** by the b-tree layer. This is the case if:
+**
+**   * the database file is open,
+**   * there are no dirty pages in the cache, and
+**   * the desired page is not currently in the wal file.
+*/
+int sqlite3PagerDirectReadOk(Pager *pPager, Pgno pgno){
+  if( pPager->fd->pMethods==0 ) return 0;
+  if( sqlite3PCacheIsDirty(pPager->pPCache) ) return 0;
+#ifndef SQLITE_OMIT_WAL
+  if( pPager->pWal ){
+    u32 iRead = 0;
+    int rc;
+    rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iRead);
+    return (rc==SQLITE_OK && iRead==0);
+  }
+#endif
+  return 1;
+}
+#endif
+
+#ifndef SQLITE_OMIT_WAL
+# define pagerUseWal(x) ((x)->pWal!=0)
+#else
+# define pagerUseWal(x) 0
+# define pagerRollbackWal(x) 0
+# define pagerWalFrames(v,w,x,y) 0
+# define pagerOpenWalIfPresent(z) SQLITE_OK
+# define pagerBeginReadTransaction(z) SQLITE_OK
+#endif
+
+#ifndef NDEBUG 
+/*
+** Usage:
+**
+**   assert( assert_pager_state(pPager) );
+**
+** This function runs many asserts to try to find inconsistencies in
+** the internal state of the Pager object.
+*/
+static int assert_pager_state(Pager *p){
+  Pager *pPager = p;
+
+  /* State must be valid. */
+  assert( p->eState==PAGER_OPEN
+       || p->eState==PAGER_READER
+       || p->eState==PAGER_WRITER_LOCKED
+       || p->eState==PAGER_WRITER_CACHEMOD
+       || p->eState==PAGER_WRITER_DBMOD
+       || p->eState==PAGER_WRITER_FINISHED
+       || p->eState==PAGER_ERROR
+  );
+
+  /* Regardless of the current state, a temp-file connection always behaves
+  ** as if it has an exclusive lock on the database file. It never updates
+  ** the change-counter field, so the changeCountDone flag is always set.
+  */
+  assert( p->tempFile==0 || p->eLock==EXCLUSIVE_LOCK );
+  assert( p->tempFile==0 || pPager->changeCountDone );
+
+  /* If the useJournal flag is clear, the journal-mode must be "OFF". 
+  ** And if the journal-mode is "OFF", the journal file must not be open.
+  */
+  assert( p->journalMode==PAGER_JOURNALMODE_OFF || p->useJournal );
+  assert( p->journalMode!=PAGER_JOURNALMODE_OFF || !isOpen(p->jfd) );
+
+  /* Check that MEMDB implies noSync. And an in-memory journal. Since 
+  ** this means an in-memory pager performs no IO at all, it cannot encounter 
+  ** either SQLITE_IOERR or SQLITE_FULL during rollback or while finalizing 
+  ** a journal file. (although the in-memory journal implementation may 
+  ** return SQLITE_IOERR_NOMEM while the journal file is being written). It 
+  ** is therefore not possible for an in-memory pager to enter the ERROR 
+  ** state.
+  */
+  if( MEMDB ){
+    assert( !isOpen(p->fd) );
+    assert( p->noSync );
+    assert( p->journalMode==PAGER_JOURNALMODE_OFF 
+         || p->journalMode==PAGER_JOURNALMODE_MEMORY 
+    );
+    assert( p->eState!=PAGER_ERROR && p->eState!=PAGER_OPEN );
+    assert( pagerUseWal(p)==0 );
+  }
+
+  /* If changeCountDone is set, a RESERVED lock or greater must be held
+  ** on the file.
+  */
+  assert( pPager->changeCountDone==0 || pPager->eLock>=RESERVED_LOCK );
+  assert( p->eLock!=PENDING_LOCK );
+
+  switch( p->eState ){
+    case PAGER_OPEN:
+      assert( !MEMDB );
+      assert( pPager->errCode==SQLITE_OK );
+      assert( sqlite3PcacheRefCount(pPager->pPCache)==0 || pPager->tempFile );
+      break;
+
+    case PAGER_READER:
+      assert( pPager->errCode==SQLITE_OK );
+      assert( p->eLock!=UNKNOWN_LOCK );
+      assert( p->eLock>=SHARED_LOCK );
+      break;
+
+    case PAGER_WRITER_LOCKED:
+      assert( p->eLock!=UNKNOWN_LOCK );
+      assert( pPager->errCode==SQLITE_OK );
+      if( !pagerUseWal(pPager) ){
+        assert( p->eLock>=RESERVED_LOCK );
+      }
+      assert( pPager->dbSize==pPager->dbOrigSize );
+      assert( pPager->dbOrigSize==pPager->dbFileSize );
+      assert( pPager->dbOrigSize==pPager->dbHintSize );
+      assert( pPager->setSuper==0 );
+      break;
+
+    case PAGER_WRITER_CACHEMOD:
+      assert( p->eLock!=UNKNOWN_LOCK );
+      assert( pPager->errCode==SQLITE_OK );
+      if( !pagerUseWal(pPager) ){
+        /* It is possible that if journal_mode=wal here that neither the
+        ** journal file nor the WAL file are open. This happens during
+        ** a rollback transaction that switches from journal_mode=off
+        ** to journal_mode=wal.
+        */
+        assert( p->eLock>=RESERVED_LOCK );
+        assert( isOpen(p->jfd) 
+             || p->journalMode==PAGER_JOURNALMODE_OFF 
+             || p->journalMode==PAGER_JOURNALMODE_WAL 
+        );
+      }
+      assert( pPager->dbOrigSize==pPager->dbFileSize );
+      assert( pPager->dbOrigSize==pPager->dbHintSize );
+      break;
+
+    case PAGER_WRITER_DBMOD:
+      assert( p->eLock==EXCLUSIVE_LOCK );
+      assert( pPager->errCode==SQLITE_OK );
+      assert( !pagerUseWal(pPager) );
+      assert( p->eLock>=EXCLUSIVE_LOCK );
+      assert( isOpen(p->jfd) 
+           || p->journalMode==PAGER_JOURNALMODE_OFF 
+           || p->journalMode==PAGER_JOURNALMODE_WAL 
+           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
+      );
+      assert( pPager->dbOrigSize<=pPager->dbHintSize );
+      break;
+
+    case PAGER_WRITER_FINISHED:
+      assert( p->eLock==EXCLUSIVE_LOCK );
+      assert( pPager->errCode==SQLITE_OK );
+      assert( !pagerUseWal(pPager) );
+      assert( isOpen(p->jfd) 
+           || p->journalMode==PAGER_JOURNALMODE_OFF 
+           || p->journalMode==PAGER_JOURNALMODE_WAL 
+           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
+      );
+      break;
+
+    case PAGER_ERROR:
+      /* There must be at least one outstanding reference to the pager if
+      ** in ERROR state. Otherwise the pager should have already dropped
+      ** back to OPEN state.
+      */
+      assert( pPager->errCode!=SQLITE_OK );
+      assert( sqlite3PcacheRefCount(pPager->pPCache)>0 || pPager->tempFile );
+      break;
+  }
+
+  return 1;
+}
+#endif /* ifndef NDEBUG */
+
+#ifdef SQLITE_DEBUG 
+/*
+** Return a pointer to a human readable string in a static buffer
+** containing the state of the Pager object passed as an argument. This
+** is intended to be used within debuggers. For example, as an alternative
+** to "print *pPager" in gdb:
+**
+** (gdb) printf "%s", print_pager_state(pPager)
+**
+** This routine has external linkage in order to suppress compiler warnings
+** about an unused function.  It is enclosed within SQLITE_DEBUG and so does
+** not appear in normal builds.
+*/
+char *print_pager_state(Pager *p){
+  static char zRet[1024];
+
+  sqlite3_snprintf(1024, zRet,
+      "Filename:      %s\n"
+      "State:         %s errCode=%d\n"
+      "Lock:          %s\n"
+      "Locking mode:  locking_mode=%s\n"
+      "Journal mode:  journal_mode=%s\n"
+      "Backing store: tempFile=%d memDb=%d useJournal=%d\n"
+      "Journal:       journalOff=%lld journalHdr=%lld\n"
+      "Size:          dbsize=%d dbOrigSize=%d dbFileSize=%d\n"
+      , p->zFilename
+      , p->eState==PAGER_OPEN            ? "OPEN" :
+        p->eState==PAGER_READER          ? "READER" :
+        p->eState==PAGER_WRITER_LOCKED   ? "WRITER_LOCKED" :
+        p->eState==PAGER_WRITER_CACHEMOD ? "WRITER_CACHEMOD" :
+        p->eState==PAGER_WRITER_DBMOD    ? "WRITER_DBMOD" :
+        p->eState==PAGER_WRITER_FINISHED ? "WRITER_FINISHED" :
+        p->eState==PAGER_ERROR           ? "ERROR" : "?error?"
+      , (int)p->errCode
+      , p->eLock==NO_LOCK         ? "NO_LOCK" :
+        p->eLock==RESERVED_LOCK   ? "RESERVED" :
+        p->eLock==EXCLUSIVE_LOCK  ? "EXCLUSIVE" :
+        p->eLock==SHARED_LOCK     ? "SHARED" :
+        p->eLock==UNKNOWN_LOCK    ? "UNKNOWN" : "?error?"
+      , p->exclusiveMode ? "exclusive" : "normal"
+      , p->journalMode==PAGER_JOURNALMODE_MEMORY   ? "memory" :
+        p->journalMode==PAGER_JOURNALMODE_OFF      ? "off" :
+        p->journalMode==PAGER_JOURNALMODE_DELETE   ? "delete" :
+        p->journalMode==PAGER_JOURNALMODE_PERSIST  ? "persist" :
+        p->journalMode==PAGER_JOURNALMODE_TRUNCATE ? "truncate" :
+        p->journalMode==PAGER_JOURNALMODE_WAL      ? "wal" : "?error?"
+      , (int)p->tempFile, (int)p->memDb, (int)p->useJournal
+      , p->journalOff, p->journalHdr
+      , (int)p->dbSize, (int)p->dbOrigSize, (int)p->dbFileSize
+  );
+
+  return zRet;
+}
+#endif
+
+/* Forward references to the various page getters */
+static int getPageNormal(Pager*,Pgno,DbPage**,int);
+static int getPageError(Pager*,Pgno,DbPage**,int);
+#if SQLITE_MAX_MMAP_SIZE>0
+static int getPageMMap(Pager*,Pgno,DbPage**,int);
+#endif
+
+/*
+** Set the Pager.xGet method for the appropriate routine used to fetch
+** content from the pager.
+*/
+static void setGetterMethod(Pager *pPager){
+  if( pPager->errCode ){
+    pPager->xGet = getPageError;
+#if SQLITE_MAX_MMAP_SIZE>0
+  }else if( USEFETCH(pPager) ){
+    pPager->xGet = getPageMMap;
+#endif /* SQLITE_MAX_MMAP_SIZE>0 */
+  }else{
+    pPager->xGet = getPageNormal;
+  }
+}
+
+/*
+** Return true if it is necessary to write page *pPg into the sub-journal.
+** A page needs to be written into the sub-journal if there exists one
+** or more open savepoints for which:
+**
+**   * The page-number is less than or equal to PagerSavepoint.nOrig, and
+**   * The bit corresponding to the page-number is not set in
+**     PagerSavepoint.pInSavepoint.
+*/
+static int subjRequiresPage(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  PagerSavepoint *p;
+  Pgno pgno = pPg->pgno;
+  int i;
+  for(i=0; i<pPager->nSavepoint; i++){
+    p = &pPager->aSavepoint[i];
+    if( p->nOrig>=pgno && 0==sqlite3BitvecTestNotNull(p->pInSavepoint, pgno) ){
+      for(i=i+1; i<pPager->nSavepoint; i++){
+        pPager->aSavepoint[i].bTruncateOnRelease = 0;
+      }
+      return 1;
+    }
+  }
+  return 0;
+}
+
+#ifdef SQLITE_DEBUG
+/*
+** Return true if the page is already in the journal file.
+*/
+static int pageInJournal(Pager *pPager, PgHdr *pPg){
+  return sqlite3BitvecTest(pPager->pInJournal, pPg->pgno);
+}
+#endif
+
+/*
+** Read a 32-bit integer from the given file descriptor.  Store the integer
+** that is read in *pRes.  Return SQLITE_OK if everything worked, or an
+** error code is something goes wrong.
+**
+** All values are stored on disk as big-endian.
+*/
+static int read32bits(sqlite3_file *fd, i64 offset, u32 *pRes){
+  unsigned char ac[4];
+  int rc = sqlite3OsRead(fd, ac, sizeof(ac), offset);
+  if( rc==SQLITE_OK ){
+    *pRes = sqlite3Get4byte(ac);
+  }
+  return rc;
+}
+
+/*
+** Write a 32-bit integer into a string buffer in big-endian byte order.
+*/
+#define put32bits(A,B)  sqlite3Put4byte((u8*)A,B)
+
+
+/*
+** Write a 32-bit integer into the given file descriptor.  Return SQLITE_OK
+** on success or an error code is something goes wrong.
+*/
+static int write32bits(sqlite3_file *fd, i64 offset, u32 val){
+  char ac[4];
+  put32bits(ac, val);
+  return sqlite3OsWrite(fd, ac, 4, offset);
+}
+
+/*
+** Unlock the database file to level eLock, which must be either NO_LOCK
+** or SHARED_LOCK. Regardless of whether or not the call to xUnlock()
+** succeeds, set the Pager.eLock variable to match the (attempted) new lock.
+**
+** Except, if Pager.eLock is set to UNKNOWN_LOCK when this function is
+** called, do not modify it. See the comment above the #define of 
+** UNKNOWN_LOCK for an explanation of this.
+*/
+static int pagerUnlockDb(Pager *pPager, int eLock){
+  int rc = SQLITE_OK;
+
+  assert( !pPager->exclusiveMode || pPager->eLock==eLock );
+  assert( eLock==NO_LOCK || eLock==SHARED_LOCK );
+  assert( eLock!=NO_LOCK || pagerUseWal(pPager)==0 );
+  if( isOpen(pPager->fd) ){
+    assert( pPager->eLock>=eLock );
+    rc = pPager->noLock ? SQLITE_OK : sqlite3OsUnlock(pPager->fd, eLock);
+    if( pPager->eLock!=UNKNOWN_LOCK ){
+      pPager->eLock = (u8)eLock;
+    }
+    IOTRACE(("UNLOCK %p %d\n", pPager, eLock))
+  }
+  pPager->changeCountDone = pPager->tempFile; /* ticket fb3b3024ea238d5c */
+  return rc;
+}
+
+/*
+** Lock the database file to level eLock, which must be either SHARED_LOCK,
+** RESERVED_LOCK or EXCLUSIVE_LOCK. If the caller is successful, set the
+** Pager.eLock variable to the new locking state. 
+**
+** Except, if Pager.eLock is set to UNKNOWN_LOCK when this function is 
+** called, do not modify it unless the new locking state is EXCLUSIVE_LOCK. 
+** See the comment above the #define of UNKNOWN_LOCK for an explanation 
+** of this.
+*/
+static int pagerLockDb(Pager *pPager, int eLock){
+  int rc = SQLITE_OK;
+
+  assert( eLock==SHARED_LOCK || eLock==RESERVED_LOCK || eLock==EXCLUSIVE_LOCK );
+  if( pPager->eLock<eLock || pPager->eLock==UNKNOWN_LOCK ){
+    rc = pPager->noLock ? SQLITE_OK : sqlite3OsLock(pPager->fd, eLock);
+    if( rc==SQLITE_OK && (pPager->eLock!=UNKNOWN_LOCK||eLock==EXCLUSIVE_LOCK) ){
+      pPager->eLock = (u8)eLock;
+      IOTRACE(("LOCK %p %d\n", pPager, eLock))
+    }
+  }
+  return rc;
+}
+
+/*
+** This function determines whether or not the atomic-write or
+** atomic-batch-write optimizations can be used with this pager. The
+** atomic-write optimization can be used if:
+**
+**  (a) the value returned by OsDeviceCharacteristics() indicates that
+**      a database page may be written atomically, and
+**  (b) the value returned by OsSectorSize() is less than or equal
+**      to the page size.
+**
+** If it can be used, then the value returned is the size of the journal 
+** file when it contains rollback data for exactly one page.
+**
+** The atomic-batch-write optimization can be used if OsDeviceCharacteristics()
+** returns a value with the SQLITE_IOCAP_BATCH_ATOMIC bit set. -1 is
+** returned in this case.
+**
+** If neither optimization can be used, 0 is returned.
+*/
+static int jrnlBufferSize(Pager *pPager){
+  assert( !MEMDB );
+
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+  int dc;                           /* Device characteristics */
+
+  assert( isOpen(pPager->fd) );
+  dc = sqlite3OsDeviceCharacteristics(pPager->fd);
+#else
+  UNUSED_PARAMETER(pPager);
+#endif
+
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+  if( pPager->dbSize>0 && (dc&SQLITE_IOCAP_BATCH_ATOMIC) ){
+    return -1;
+  }
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+  {
+    int nSector = pPager->sectorSize;
+    int szPage = pPager->pageSize;
+
+    assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
+    assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
+    if( 0==(dc&(SQLITE_IOCAP_ATOMIC|(szPage>>8)) || nSector>szPage) ){
+      return 0;
+    }
+  }
+
+  return JOURNAL_HDR_SZ(pPager) + JOURNAL_PG_SZ(pPager);
+#endif
+
+  return 0;
+}
+
+/*
+** If SQLITE_CHECK_PAGES is defined then we do some sanity checking
+** on the cache using a hash function.  This is used for testing
+** and debugging only.
+*/
+#ifdef SQLITE_CHECK_PAGES
+/*
+** Return a 32-bit hash of the page data for pPage.
+*/
+static u32 pager_datahash(int nByte, unsigned char *pData){
+  u32 hash = 0;
+  int i;
+  for(i=0; i<nByte; i++){
+    hash = (hash*1039) + pData[i];
+  }
+  return hash;
+}
+static u32 pager_pagehash(PgHdr *pPage){
+  return pager_datahash(pPage->pPager->pageSize, (unsigned char *)pPage->pData);
+}
+static void pager_set_pagehash(PgHdr *pPage){
+  pPage->pageHash = pager_pagehash(pPage);
+}
+
+/*
+** The CHECK_PAGE macro takes a PgHdr* as an argument. If SQLITE_CHECK_PAGES
+** is defined, and NDEBUG is not defined, an assert() statement checks
+** that the page is either dirty or still matches the calculated page-hash.
+*/
+#define CHECK_PAGE(x) checkPage(x)
+static void checkPage(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  assert( pPager->eState!=PAGER_ERROR );
+  assert( (pPg->flags&PGHDR_DIRTY) || pPg->pageHash==pager_pagehash(pPg) );
+}
+
+#else
+#define pager_datahash(X,Y)  0
+#define pager_pagehash(X)  0
+#define pager_set_pagehash(X)
+#define CHECK_PAGE(x)
+#endif  /* SQLITE_CHECK_PAGES */
+
+/*
+** When this is called the journal file for pager pPager must be open.
+** This function attempts to read a super-journal file name from the 
+** end of the file and, if successful, copies it into memory supplied 
+** by the caller. See comments above writeSuperJournal() for the format
+** used to store a super-journal file name at the end of a journal file.
+**
+** zSuper must point to a buffer of at least nSuper bytes allocated by
+** the caller. This should be sqlite3_vfs.mxPathname+1 (to ensure there is
+** enough space to write the super-journal name). If the super-journal
+** name in the journal is longer than nSuper bytes (including a
+** nul-terminator), then this is handled as if no super-journal name
+** were present in the journal.
+**
+** If a super-journal file name is present at the end of the journal
+** file, then it is copied into the buffer pointed to by zSuper. A
+** nul-terminator byte is appended to the buffer following the
+** super-journal file name.
+**
+** If it is determined that no super-journal file name is present 
+** zSuper[0] is set to 0 and SQLITE_OK returned.
+**
+** If an error occurs while reading from the journal file, an SQLite
+** error code is returned.
+*/
+static int readSuperJournal(sqlite3_file *pJrnl, char *zSuper, u32 nSuper){
+  int rc;                    /* Return code */
+  u32 len;                   /* Length in bytes of super-journal name */
+  i64 szJ;                   /* Total size in bytes of journal file pJrnl */
+  u32 cksum;                 /* MJ checksum value read from journal */
+  u32 u;                     /* Unsigned loop counter */
+  unsigned char aMagic[8];   /* A buffer to hold the magic header */
+  zSuper[0] = '\0';
+
+  if( SQLITE_OK!=(rc = sqlite3OsFileSize(pJrnl, &szJ))
+   || szJ<16
+   || SQLITE_OK!=(rc = read32bits(pJrnl, szJ-16, &len))
+   || len>=nSuper 
+   || len>szJ-16
+   || len==0 
+   || SQLITE_OK!=(rc = read32bits(pJrnl, szJ-12, &cksum))
+   || SQLITE_OK!=(rc = sqlite3OsRead(pJrnl, aMagic, 8, szJ-8))
+   || memcmp(aMagic, aJournalMagic, 8)
+   || SQLITE_OK!=(rc = sqlite3OsRead(pJrnl, zSuper, len, szJ-16-len))
+  ){
+    return rc;
+  }
+
+  /* See if the checksum matches the super-journal name */
+  for(u=0; u<len; u++){
+    cksum -= zSuper[u];
+  }
+  if( cksum ){
+    /* If the checksum doesn't add up, then one or more of the disk sectors
+    ** containing the super-journal filename is corrupted. This means
+    ** definitely roll back, so just return SQLITE_OK and report a (nul)
+    ** super-journal filename.
+    */
+    len = 0;
+  }
+  zSuper[len] = '\0';
+  zSuper[len+1] = '\0';
+   
+  return SQLITE_OK;
+}
+
+/*
+** Return the offset of the sector boundary at or immediately 
+** following the value in pPager->journalOff, assuming a sector 
+** size of pPager->sectorSize bytes.
+**
+** i.e for a sector size of 512:
+**
+**   Pager.journalOff          Return value
+**   ---------------------------------------
+**   0                         0
+**   512                       512
+**   100                       512
+**   2000                      2048
+** 
+*/
+static i64 journalHdrOffset(Pager *pPager){
+  i64 offset = 0;
+  i64 c = pPager->journalOff;
+  if( c ){
+    offset = ((c-1)/JOURNAL_HDR_SZ(pPager) + 1) * JOURNAL_HDR_SZ(pPager);
+  }
+  assert( offset%JOURNAL_HDR_SZ(pPager)==0 );
+  assert( offset>=c );
+  assert( (offset-c)<JOURNAL_HDR_SZ(pPager) );
+  return offset;
+}
+
+/*
+** The journal file must be open when this function is called.
+**
+** This function is a no-op if the journal file has not been written to
+** within the current transaction (i.e. if Pager.journalOff==0).
+**
+** If doTruncate is non-zero or the Pager.journalSizeLimit variable is
+** set to 0, then truncate the journal file to zero bytes in size. Otherwise,
+** zero the 28-byte header at the start of the journal file. In either case, 
+** if the pager is not in no-sync mode, sync the journal file immediately 
+** after writing or truncating it.
+**
+** If Pager.journalSizeLimit is set to a positive, non-zero value, and
+** following the truncation or zeroing described above the size of the 
+** journal file in bytes is larger than this value, then truncate the
+** journal file to Pager.journalSizeLimit bytes. The journal file does
+** not need to be synced following this operation.
+**
+** If an IO error occurs, abandon processing and return the IO error code.
+** Otherwise, return SQLITE_OK.
+*/
+static int zeroJournalHdr(Pager *pPager, int doTruncate){
+  int rc = SQLITE_OK;                               /* Return code */
+  assert( isOpen(pPager->jfd) );
+  assert( !sqlite3JournalIsInMemory(pPager->jfd) );
+  if( pPager->journalOff ){
+    const i64 iLimit = pPager->journalSizeLimit;    /* Local cache of jsl */
+
+    IOTRACE(("JZEROHDR %p\n", pPager))
+    if( doTruncate || iLimit==0 ){
+      rc = sqlite3OsTruncate(pPager->jfd, 0);
+    }else{
+      static const char zeroHdr[28] = {0};
+      rc = sqlite3OsWrite(pPager->jfd, zeroHdr, sizeof(zeroHdr), 0);
+    }
+    if( rc==SQLITE_OK && !pPager->noSync ){
+      rc = sqlite3OsSync(pPager->jfd, SQLITE_SYNC_DATAONLY|pPager->syncFlags);
+    }
+
+    /* At this point the transaction is committed but the write lock 
+    ** is still held on the file. If there is a size limit configured for 
+    ** the persistent journal and the journal file currently consumes more
+    ** space than that limit allows for, truncate it now. There is no need
+    ** to sync the file following this operation.
+    */
+    if( rc==SQLITE_OK && iLimit>0 ){
+      i64 sz;
+      rc = sqlite3OsFileSize(pPager->jfd, &sz);
+      if( rc==SQLITE_OK && sz>iLimit ){
+        rc = sqlite3OsTruncate(pPager->jfd, iLimit);
+      }
+    }
+  }
+  return rc;
+}
+
+/*
+** The journal file must be open when this routine is called. A journal
+** header (JOURNAL_HDR_SZ bytes) is written into the journal file at the
+** current location.
+**
+** The format for the journal header is as follows:
+** - 8 bytes: Magic identifying journal format.
+** - 4 bytes: Number of records in journal, or -1 no-sync mode is on.
+** - 4 bytes: Random number used for page hash.
+** - 4 bytes: Initial database page count.
+** - 4 bytes: Sector size used by the process that wrote this journal.
+** - 4 bytes: Database page size.
+** 
+** Followed by (JOURNAL_HDR_SZ - 28) bytes of unused space.
+*/
+static int writeJournalHdr(Pager *pPager){
+  int rc = SQLITE_OK;                 /* Return code */
+  char *zHeader = pPager->pTmpSpace;  /* Temporary space used to build header */
+  u32 nHeader = (u32)pPager->pageSize;/* Size of buffer pointed to by zHeader */
+  u32 nWrite;                         /* Bytes of header sector written */
+  int ii;                             /* Loop counter */
+
+  assert( isOpen(pPager->jfd) );      /* Journal file must be open. */
+
+  if( nHeader>JOURNAL_HDR_SZ(pPager) ){
+    nHeader = JOURNAL_HDR_SZ(pPager);
+  }
+
+  /* If there are active savepoints and any of them were created 
+  ** since the most recent journal header was written, update the 
+  ** PagerSavepoint.iHdrOffset fields now.
+  */
+  for(ii=0; ii<pPager->nSavepoint; ii++){
+    if( pPager->aSavepoint[ii].iHdrOffset==0 ){
+      pPager->aSavepoint[ii].iHdrOffset = pPager->journalOff;
+    }
+  }
+
+  pPager->journalHdr = pPager->journalOff = journalHdrOffset(pPager);
+
+  /* 
+  ** Write the nRec Field - the number of page records that follow this
+  ** journal header. Normally, zero is written to this value at this time.
+  ** After the records are added to the journal (and the journal synced, 
+  ** if in full-sync mode), the zero is overwritten with the true number
+  ** of records (see syncJournal()).
+  **
+  ** A faster alternative is to write 0xFFFFFFFF to the nRec field. When
+  ** reading the journal this value tells SQLite to assume that the
+  ** rest of the journal file contains valid page records. This assumption
+  ** is dangerous, as if a failure occurred whilst writing to the journal
+  ** file it may contain some garbage data. There are two scenarios
+  ** where this risk can be ignored:
+  **
+  **   * When the pager is in no-sync mode. Corruption can follow a
+  **     power failure in this case anyway.
+  **
+  **   * When the SQLITE_IOCAP_SAFE_APPEND flag is set. This guarantees
+  **     that garbage data is never appended to the journal file.
+  */
+  assert( isOpen(pPager->fd) || pPager->noSync );
+  if( pPager->noSync || (pPager->journalMode==PAGER_JOURNALMODE_MEMORY)
+   || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_SAFE_APPEND) 
+  ){
+    memcpy(zHeader, aJournalMagic, sizeof(aJournalMagic));
+    put32bits(&zHeader[sizeof(aJournalMagic)], 0xffffffff);
+  }else{
+    memset(zHeader, 0, sizeof(aJournalMagic)+4);
+  }
+
+  /* The random check-hash initializer */ 
+  sqlite3_randomness(sizeof(pPager->cksumInit), &pPager->cksumInit);
+  put32bits(&zHeader[sizeof(aJournalMagic)+4], pPager->cksumInit);
+  /* The initial database size */
+  put32bits(&zHeader[sizeof(aJournalMagic)+8], pPager->dbOrigSize);
+  /* The assumed sector size for this process */
+  put32bits(&zHeader[sizeof(aJournalMagic)+12], pPager->sectorSize);
+
+  /* The page size */
+  put32bits(&zHeader[sizeof(aJournalMagic)+16], pPager->pageSize);
+
+  /* Initializing the tail of the buffer is not necessary.  Everything
+  ** works find if the following memset() is omitted.  But initializing
+  ** the memory prevents valgrind from complaining, so we are willing to
+  ** take the performance hit.
+  */
+  memset(&zHeader[sizeof(aJournalMagic)+20], 0,
+         nHeader-(sizeof(aJournalMagic)+20));
+
+  /* In theory, it is only necessary to write the 28 bytes that the 
+  ** journal header consumes to the journal file here. Then increment the 
+  ** Pager.journalOff variable by JOURNAL_HDR_SZ so that the next 
+  ** record is written to the following sector (leaving a gap in the file
+  ** that will be implicitly filled in by the OS).
+  **
+  ** However it has been discovered that on some systems this pattern can 
+  ** be significantly slower than contiguously writing data to the file,
+  ** even if that means explicitly writing data to the block of 
+  ** (JOURNAL_HDR_SZ - 28) bytes that will not be used. So that is what
+  ** is done. 
+  **
+  ** The loop is required here in case the sector-size is larger than the 
+  ** database page size. Since the zHeader buffer is only Pager.pageSize
+  ** bytes in size, more than one call to sqlite3OsWrite() may be required
+  ** to populate the entire journal header sector.
+  */ 
+  for(nWrite=0; rc==SQLITE_OK&&nWrite<JOURNAL_HDR_SZ(pPager); nWrite+=nHeader){
+    IOTRACE(("JHDR %p %lld %d\n", pPager, pPager->journalHdr, nHeader))
+    rc = sqlite3OsWrite(pPager->jfd, zHeader, nHeader, pPager->journalOff);
+    assert( pPager->journalHdr <= pPager->journalOff );
+    pPager->journalOff += nHeader;
+  }
+
+  return rc;
+}
+
+/*
+** The journal file must be open when this is called. A journal header file
+** (JOURNAL_HDR_SZ bytes) is read from the current location in the journal
+** file. The current location in the journal file is given by
+** pPager->journalOff. See comments above function writeJournalHdr() for
+** a description of the journal header format.
+**
+** If the header is read successfully, *pNRec is set to the number of
+** page records following this header and *pDbSize is set to the size of the
+** database before the transaction began, in pages. Also, pPager->cksumInit
+** is set to the value read from the journal header. SQLITE_OK is returned
+** in this case.
+**
+** If the journal header file appears to be corrupted, SQLITE_DONE is
+** returned and *pNRec and *PDbSize are undefined.  If JOURNAL_HDR_SZ bytes
+** cannot be read from the journal file an error code is returned.
+*/
+static int readJournalHdr(
+  Pager *pPager,               /* Pager object */
+  int isHot,
+  i64 journalSize,             /* Size of the open journal file in bytes */
+  u32 *pNRec,                  /* OUT: Value read from the nRec field */
+  u32 *pDbSize                 /* OUT: Value of original database size field */
+){
+  int rc;                      /* Return code */
+  unsigned char aMagic[8];     /* A buffer to hold the magic header */
+  i64 iHdrOff;                 /* Offset of journal header being read */
+
+  assert( isOpen(pPager->jfd) );      /* Journal file must be open. */
+
+  /* Advance Pager.journalOff to the start of the next sector. If the
+  ** journal file is too small for there to be a header stored at this
+  ** point, return SQLITE_DONE.
+  */
+  pPager->journalOff = journalHdrOffset(pPager);
+  if( pPager->journalOff+JOURNAL_HDR_SZ(pPager) > journalSize ){
+    return SQLITE_DONE;
+  }
+  iHdrOff = pPager->journalOff;
+
+  /* Read in the first 8 bytes of the journal header. If they do not match
+  ** the  magic string found at the start of each journal header, return
+  ** SQLITE_DONE. If an IO error occurs, return an error code. Otherwise,
+  ** proceed.
+  */
+  if( isHot || iHdrOff!=pPager->journalHdr ){
+    rc = sqlite3OsRead(pPager->jfd, aMagic, sizeof(aMagic), iHdrOff);
+    if( rc ){
+      return rc;
+    }
+    if( memcmp(aMagic, aJournalMagic, sizeof(aMagic))!=0 ){
+      return SQLITE_DONE;
+    }
+  }
+
+  /* Read the first three 32-bit fields of the journal header: The nRec
+  ** field, the checksum-initializer and the database size at the start
+  ** of the transaction. Return an error code if anything goes wrong.
+  */
+  if( SQLITE_OK!=(rc = read32bits(pPager->jfd, iHdrOff+8, pNRec))
+   || SQLITE_OK!=(rc = read32bits(pPager->jfd, iHdrOff+12, &pPager->cksumInit))
+   || SQLITE_OK!=(rc = read32bits(pPager->jfd, iHdrOff+16, pDbSize))
+  ){
+    return rc;
+  }
+
+  if( pPager->journalOff==0 ){
+    u32 iPageSize;               /* Page-size field of journal header */
+    u32 iSectorSize;             /* Sector-size field of journal header */
+
+    /* Read the page-size and sector-size journal header fields. */
+    if( SQLITE_OK!=(rc = read32bits(pPager->jfd, iHdrOff+20, &iSectorSize))
+     || SQLITE_OK!=(rc = read32bits(pPager->jfd, iHdrOff+24, &iPageSize))
+    ){
+      return rc;
+    }
+
+    /* Versions of SQLite prior to 3.5.8 set the page-size field of the
+    ** journal header to zero. In this case, assume that the Pager.pageSize
+    ** variable is already set to the correct page size.
+    */
+    if( iPageSize==0 ){
+      iPageSize = pPager->pageSize;
+    }
+
+    /* Check that the values read from the page-size and sector-size fields
+    ** are within range. To be 'in range', both values need to be a power
+    ** of two greater than or equal to 512 or 32, and not greater than their 
+    ** respective compile time maximum limits.
+    */
+    if( iPageSize<512                  || iSectorSize<32
+     || iPageSize>SQLITE_MAX_PAGE_SIZE || iSectorSize>MAX_SECTOR_SIZE
+     || ((iPageSize-1)&iPageSize)!=0   || ((iSectorSize-1)&iSectorSize)!=0 
+    ){
+      /* If the either the page-size or sector-size in the journal-header is 
+      ** invalid, then the process that wrote the journal-header must have 
+      ** crashed before the header was synced. In this case stop reading 
+      ** the journal file here.
+      */
+      return SQLITE_DONE;
+    }
+
+    /* Update the page-size to match the value read from the journal. 
+    ** Use a testcase() macro to make sure that malloc failure within 
+    ** PagerSetPagesize() is tested.
+    */
+    rc = sqlite3PagerSetPagesize(pPager, &iPageSize, -1);
+    testcase( rc!=SQLITE_OK );
+
+    /* Update the assumed sector-size to match the value used by 
+    ** the process that created this journal. If this journal was
+    ** created by a process other than this one, then this routine
+    ** is being called from within pager_playback(). The local value
+    ** of Pager.sectorSize is restored at the end of that routine.
+    */
+    pPager->sectorSize = iSectorSize;
+  }
+
+  pPager->journalOff += JOURNAL_HDR_SZ(pPager);
+  return rc;
+}
+
+
+/*
+** Write the supplied super-journal name into the journal file for pager
+** pPager at the current location. The super-journal name must be the last
+** thing written to a journal file. If the pager is in full-sync mode, the
+** journal file descriptor is advanced to the next sector boundary before
+** anything is written. The format is:
+**
+**   + 4 bytes: PAGER_SJ_PGNO.
+**   + N bytes: super-journal filename in utf-8.
+**   + 4 bytes: N (length of super-journal name in bytes, no nul-terminator).
+**   + 4 bytes: super-journal name checksum.
+**   + 8 bytes: aJournalMagic[].
+**
+** The super-journal page checksum is the sum of the bytes in thesuper-journal
+** name, where each byte is interpreted as a signed 8-bit integer.
+**
+** If zSuper is a NULL pointer (occurs for a single database transaction), 
+** this call is a no-op.
+*/
+static int writeSuperJournal(Pager *pPager, const char *zSuper){
+  int rc;                          /* Return code */
+  int nSuper;                      /* Length of string zSuper */
+  i64 iHdrOff;                     /* Offset of header in journal file */
+  i64 jrnlSize;                    /* Size of journal file on disk */
+  u32 cksum = 0;                   /* Checksum of string zSuper */
+
+  assert( pPager->setSuper==0 );
+  assert( !pagerUseWal(pPager) );
+
+  if( !zSuper 
+   || pPager->journalMode==PAGER_JOURNALMODE_MEMORY 
+   || !isOpen(pPager->jfd)
+  ){
+    return SQLITE_OK;
+  }
+  pPager->setSuper = 1;
+  assert( pPager->journalHdr <= pPager->journalOff );
+
+  /* Calculate the length in bytes and the checksum of zSuper */
+  for(nSuper=0; zSuper[nSuper]; nSuper++){
+    cksum += zSuper[nSuper];
+  }
+
+  /* If in full-sync mode, advance to the next disk sector before writing
+  ** the super-journal name. This is in case the previous page written to
+  ** the journal has already been synced.
+  */
+  if( pPager->fullSync ){
+    pPager->journalOff = journalHdrOffset(pPager);
+  }
+  iHdrOff = pPager->journalOff;
+
+  /* Write the super-journal data to the end of the journal file. If
+  ** an error occurs, return the error code to the caller.
+  */
+  if( (0 != (rc = write32bits(pPager->jfd, iHdrOff, PAGER_SJ_PGNO(pPager))))
+   || (0 != (rc = sqlite3OsWrite(pPager->jfd, zSuper, nSuper, iHdrOff+4)))
+   || (0 != (rc = write32bits(pPager->jfd, iHdrOff+4+nSuper, nSuper)))
+   || (0 != (rc = write32bits(pPager->jfd, iHdrOff+4+nSuper+4, cksum)))
+   || (0 != (rc = sqlite3OsWrite(pPager->jfd, aJournalMagic, 8,
+                                 iHdrOff+4+nSuper+8)))
+  ){
+    return rc;
+  }
+  pPager->journalOff += (nSuper+20);
+
+  /* If the pager is in peristent-journal mode, then the physical 
+  ** journal-file may extend past the end of the super-journal name
+  ** and 8 bytes of magic data just written to the file. This is 
+  ** dangerous because the code to rollback a hot-journal file
+  ** will not be able to find the super-journal name to determine 
+  ** whether or not the journal is hot. 
+  **
+  ** Easiest thing to do in this scenario is to truncate the journal 
+  ** file to the required size.
+  */ 
+  if( SQLITE_OK==(rc = sqlite3OsFileSize(pPager->jfd, &jrnlSize))
+   && jrnlSize>pPager->journalOff
+  ){
+    rc = sqlite3OsTruncate(pPager->jfd, pPager->journalOff);
+  }
+  return rc;
+}
+
+/*
+** Discard the entire contents of the in-memory page-cache.
+*/
+static void pager_reset(Pager *pPager){
+  pPager->iDataVersion++;
+  sqlite3BackupRestart(pPager->pBackup);
+  sqlite3PcacheClear(pPager->pPCache);
+}
+
+/*
+** Return the pPager->iDataVersion value
+*/
+u32 sqlite3PagerDataVersion(Pager *pPager){
+  return pPager->iDataVersion;
+}
+
+/*
+** Free all structures in the Pager.aSavepoint[] array and set both
+** Pager.aSavepoint and Pager.nSavepoint to zero. Close the sub-journal
+** if it is open and the pager is not in exclusive mode.
+*/
+static void releaseAllSavepoints(Pager *pPager){
+  int ii;               /* Iterator for looping through Pager.aSavepoint */
+  for(ii=0; ii<pPager->nSavepoint; ii++){
+    sqlite3BitvecDestroy(pPager->aSavepoint[ii].pInSavepoint);
+  }
+  if( !pPager->exclusiveMode || sqlite3JournalIsInMemory(pPager->sjfd) ){
+    sqlite3OsClose(pPager->sjfd);
+  }
+  sqlite3_free(pPager->aSavepoint);
+  pPager->aSavepoint = 0;
+  pPager->nSavepoint = 0;
+  pPager->nSubRec = 0;
+}
+
+/*
+** Set the bit number pgno in the PagerSavepoint.pInSavepoint 
+** bitvecs of all open savepoints. Return SQLITE_OK if successful
+** or SQLITE_NOMEM if a malloc failure occurs.
+*/
+static int addToSavepointBitvecs(Pager *pPager, Pgno pgno){
+  int ii;                   /* Loop counter */
+  int rc = SQLITE_OK;       /* Result code */
+
+  for(ii=0; ii<pPager->nSavepoint; ii++){
+    PagerSavepoint *p = &pPager->aSavepoint[ii];
+    if( pgno<=p->nOrig ){
+      rc |= sqlite3BitvecSet(p->pInSavepoint, pgno);
+      testcase( rc==SQLITE_NOMEM );
+      assert( rc==SQLITE_OK || rc==SQLITE_NOMEM );
+    }
+  }
+  return rc;
+}
+
+/*
+** This function is a no-op if the pager is in exclusive mode and not
+** in the ERROR state. Otherwise, it switches the pager to PAGER_OPEN
+** state.
+**
+** If the pager is not in exclusive-access mode, the database file is
+** completely unlocked. If the file is unlocked and the file-system does
+** not exhibit the UNDELETABLE_WHEN_OPEN property, the journal file is
+** closed (if it is open).
+**
+** If the pager is in ERROR state when this function is called, the 
+** contents of the pager cache are discarded before switching back to 
+** the OPEN state. Regardless of whether the pager is in exclusive-mode
+** or not, any journal file left in the file-system will be treated
+** as a hot-journal and rolled back the next time a read-transaction
+** is opened (by this or by any other connection).
+*/
+static void pager_unlock(Pager *pPager){
+
+  assert( pPager->eState==PAGER_READER 
+       || pPager->eState==PAGER_OPEN 
+       || pPager->eState==PAGER_ERROR 
+  );
+
+  sqlite3BitvecDestroy(pPager->pInJournal);
+  pPager->pInJournal = 0;
+  releaseAllSavepoints(pPager);
+
+  if( pagerUseWal(pPager) ){
+    assert( !isOpen(pPager->jfd) );
+    sqlite3WalEndReadTransaction(pPager->pWal);
+    pPager->eState = PAGER_OPEN;
+  }else if( !pPager->exclusiveMode ){
+    int rc;                       /* Error code returned by pagerUnlockDb() */
+    int iDc = isOpen(pPager->fd)?sqlite3OsDeviceCharacteristics(pPager->fd):0;
+
+    /* If the operating system support deletion of open files, then
+    ** close the journal file when dropping the database lock.  Otherwise
+    ** another connection with journal_mode=delete might delete the file
+    ** out from under us.
+    */
+    assert( (PAGER_JOURNALMODE_MEMORY   & 5)!=1 );
+    assert( (PAGER_JOURNALMODE_OFF      & 5)!=1 );
+    assert( (PAGER_JOURNALMODE_WAL      & 5)!=1 );
+    assert( (PAGER_JOURNALMODE_DELETE   & 5)!=1 );
+    assert( (PAGER_JOURNALMODE_TRUNCATE & 5)==1 );
+    assert( (PAGER_JOURNALMODE_PERSIST  & 5)==1 );
+    if( 0==(iDc & SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN)
+     || 1!=(pPager->journalMode & 5)
+    ){
+      sqlite3OsClose(pPager->jfd);
+    }
+
+    /* If the pager is in the ERROR state and the call to unlock the database
+    ** file fails, set the current lock to UNKNOWN_LOCK. See the comment
+    ** above the #define for UNKNOWN_LOCK for an explanation of why this
+    ** is necessary.
+    */
+    rc = pagerUnlockDb(pPager, NO_LOCK);
+    if( rc!=SQLITE_OK && pPager->eState==PAGER_ERROR ){
+      pPager->eLock = UNKNOWN_LOCK;
+    }
+
+    /* The pager state may be changed from PAGER_ERROR to PAGER_OPEN here
+    ** without clearing the error code. This is intentional - the error
+    ** code is cleared and the cache reset in the block below.
+    */
+    assert( pPager->errCode || pPager->eState!=PAGER_ERROR );
+    pPager->eState = PAGER_OPEN;
+  }
+
+  /* If Pager.errCode is set, the contents of the pager cache cannot be
+  ** trusted. Now that there are no outstanding references to the pager,
+  ** it can safely move back to PAGER_OPEN state. This happens in both
+  ** normal and exclusive-locking mode.
+  */
+  assert( pPager->errCode==SQLITE_OK || !MEMDB );
+  if( pPager->errCode ){
+    if( pPager->tempFile==0 ){
+      pager_reset(pPager);
+      pPager->changeCountDone = 0;
+      pPager->eState = PAGER_OPEN;
+    }else{
+      pPager->eState = (isOpen(pPager->jfd) ? PAGER_OPEN : PAGER_READER);
+    }
+    if( USEFETCH(pPager) ) sqlite3OsUnfetch(pPager->fd, 0, 0);
+    pPager->errCode = SQLITE_OK;
+    setGetterMethod(pPager);
+  }
+
+  pPager->journalOff = 0;
+  pPager->journalHdr = 0;
+  pPager->setSuper = 0;
+}
+
+/*
+** This function is called whenever an IOERR or FULL error that requires
+** the pager to transition into the ERROR state may ahve occurred.
+** The first argument is a pointer to the pager structure, the second 
+** the error-code about to be returned by a pager API function. The 
+** value returned is a copy of the second argument to this function. 
+**
+** If the second argument is SQLITE_FULL, SQLITE_IOERR or one of the
+** IOERR sub-codes, the pager enters the ERROR state and the error code
+** is stored in Pager.errCode. While the pager remains in the ERROR state,
+** all major API calls on the Pager will immediately return Pager.errCode.
+**
+** The ERROR state indicates that the contents of the pager-cache 
+** cannot be trusted. This state can be cleared by completely discarding 
+** the contents of the pager-cache. If a transaction was active when
+** the persistent error occurred, then the rollback journal may need
+** to be replayed to restore the contents of the database file (as if
+** it were a hot-journal).
+*/
+static int pager_error(Pager *pPager, int rc){
+  int rc2 = rc & 0xff;
+  assert( rc==SQLITE_OK || !MEMDB );
+  assert(
+       pPager->errCode==SQLITE_FULL ||
+       pPager->errCode==SQLITE_OK ||
+       (pPager->errCode & 0xff)==SQLITE_IOERR
+  );
+  if( rc2==SQLITE_FULL || rc2==SQLITE_IOERR ){
+    pPager->errCode = rc;
+    pPager->eState = PAGER_ERROR;
+    setGetterMethod(pPager);
+  }
+  return rc;
+}
+
+static int pager_truncate(Pager *pPager, Pgno nPage);
+
+/*
+** The write transaction open on pPager is being committed (bCommit==1)
+** or rolled back (bCommit==0).
+**
+** Return TRUE if and only if all dirty pages should be flushed to disk.
+**
+** Rules:
+**
+**   *  For non-TEMP databases, always sync to disk.  This is necessary
+**      for transactions to be durable.
+**
+**   *  Sync TEMP database only on a COMMIT (not a ROLLBACK) when the backing
+**      file has been created already (via a spill on pagerStress()) and
+**      when the number of dirty pages in memory exceeds 25% of the total
+**      cache size.
+*/
+static int pagerFlushOnCommit(Pager *pPager, int bCommit){
+  if( pPager->tempFile==0 ) return 1;
+  if( !bCommit ) return 0;
+  if( !isOpen(pPager->fd) ) return 0;
+  return (sqlite3PCachePercentDirty(pPager->pPCache)>=25);
+}
+
+/*
+** This routine ends a transaction. A transaction is usually ended by 
+** either a COMMIT or a ROLLBACK operation. This routine may be called 
+** after rollback of a hot-journal, or if an error occurs while opening
+** the journal file or writing the very first journal-header of a
+** database transaction.
+** 
+** This routine is never called in PAGER_ERROR state. If it is called
+** in PAGER_NONE or PAGER_SHARED state and the lock held is less
+** exclusive than a RESERVED lock, it is a no-op.
+**
+** Otherwise, any active savepoints are released.
+**
+** If the journal file is open, then it is "finalized". Once a journal 
+** file has been finalized it is not possible to use it to roll back a 
+** transaction. Nor will it be considered to be a hot-journal by this
+** or any other database connection. Exactly how a journal is finalized
+** depends on whether or not the pager is running in exclusive mode and
+** the current journal-mode (Pager.journalMode value), as follows:
+**
+**   journalMode==MEMORY
+**     Journal file descriptor is simply closed. This destroys an 
+**     in-memory journal.
+**
+**   journalMode==TRUNCATE
+**     Journal file is truncated to zero bytes in size.
+**
+**   journalMode==PERSIST
+**     The first 28 bytes of the journal file are zeroed. This invalidates
+**     the first journal header in the file, and hence the entire journal
+**     file. An invalid journal file cannot be rolled back.
+**
+**   journalMode==DELETE
+**     The journal file is closed and deleted using sqlite3OsDelete().
+**
+**     If the pager is running in exclusive mode, this method of finalizing
+**     the journal file is never used. Instead, if the journalMode is
+**     DELETE and the pager is in exclusive mode, the method described under
+**     journalMode==PERSIST is used instead.
+**
+** After the journal is finalized, the pager moves to PAGER_READER state.
+** If running in non-exclusive rollback mode, the lock on the file is 
+** downgraded to a SHARED_LOCK.
+**
+** SQLITE_OK is returned if no error occurs. If an error occurs during
+** any of the IO operations to finalize the journal file or unlock the
+** database then the IO error code is returned to the user. If the 
+** operation to finalize the journal file fails, then the code still
+** tries to unlock the database file if not in exclusive mode. If the
+** unlock operation fails as well, then the first error code related
+** to the first error encountered (the journal finalization one) is
+** returned.
+*/
+static int pager_end_transaction(Pager *pPager, int hasSuper, int bCommit){
+  int rc = SQLITE_OK;      /* Error code from journal finalization operation */
+  int rc2 = SQLITE_OK;     /* Error code from db file unlock operation */
+
+  /* Do nothing if the pager does not have an open write transaction
+  ** or at least a RESERVED lock. This function may be called when there
+  ** is no write-transaction active but a RESERVED or greater lock is
+  ** held under two circumstances:
+  **
+  **   1. After a successful hot-journal rollback, it is called with
+  **      eState==PAGER_NONE and eLock==EXCLUSIVE_LOCK.
+  **
+  **   2. If a connection with locking_mode=exclusive holding an EXCLUSIVE 
+  **      lock switches back to locking_mode=normal and then executes a
+  **      read-transaction, this function is called with eState==PAGER_READER 
+  **      and eLock==EXCLUSIVE_LOCK when the read-transaction is closed.
+  */
+  assert( assert_pager_state(pPager) );
+  assert( pPager->eState!=PAGER_ERROR );
+  if( pPager->eState<PAGER_WRITER_LOCKED && pPager->eLock<RESERVED_LOCK ){
+    return SQLITE_OK;
+  }
+
+  releaseAllSavepoints(pPager);
+  assert( isOpen(pPager->jfd) || pPager->pInJournal==0 
+      || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
+  );
+  if( isOpen(pPager->jfd) ){
+    assert( !pagerUseWal(pPager) );
+
+    /* Finalize the journal file. */
+    if( sqlite3JournalIsInMemory(pPager->jfd) ){
+      /* assert( pPager->journalMode==PAGER_JOURNALMODE_MEMORY ); */
+      sqlite3OsClose(pPager->jfd);
+    }else if( pPager->journalMode==PAGER_JOURNALMODE_TRUNCATE ){
+      if( pPager->journalOff==0 ){
+        rc = SQLITE_OK;
+      }else{
+        rc = sqlite3OsTruncate(pPager->jfd, 0);
+        if( rc==SQLITE_OK && pPager->fullSync ){
+          /* Make sure the new file size is written into the inode right away.
+          ** Otherwise the journal might resurrect following a power loss and
+          ** cause the last transaction to roll back.  See
+          ** https://bugzilla.mozilla.org/show_bug.cgi?id=1072773
+          */
+          rc = sqlite3OsSync(pPager->jfd, pPager->syncFlags);
+        }
+      }
+      pPager->journalOff = 0;
+    }else if( pPager->journalMode==PAGER_JOURNALMODE_PERSIST
+      || (pPager->exclusiveMode && pPager->journalMode!=PAGER_JOURNALMODE_WAL)
+    ){
+      rc = zeroJournalHdr(pPager, hasSuper||pPager->tempFile);
+      pPager->journalOff = 0;
+    }else{
+      /* This branch may be executed with Pager.journalMode==MEMORY if
+      ** a hot-journal was just rolled back. In this case the journal
+      ** file should be closed and deleted. If this connection writes to
+      ** the database file, it will do so using an in-memory journal.
+      */
+      int bDelete = !pPager->tempFile;
+      assert( sqlite3JournalIsInMemory(pPager->jfd)==0 );
+      assert( pPager->journalMode==PAGER_JOURNALMODE_DELETE 
+           || pPager->journalMode==PAGER_JOURNALMODE_MEMORY 
+           || pPager->journalMode==PAGER_JOURNALMODE_WAL 
+      );
+      sqlite3OsClose(pPager->jfd);
+      if( bDelete ){
+        rc = sqlite3OsDelete(pPager->pVfs, pPager->zJournal, pPager->extraSync);
+      }
+    }
+  }
+
+#ifdef SQLITE_CHECK_PAGES
+  sqlite3PcacheIterateDirty(pPager->pPCache, pager_set_pagehash);
+  if( pPager->dbSize==0 && sqlite3PcacheRefCount(pPager->pPCache)>0 ){
+    PgHdr *p = sqlite3PagerLookup(pPager, 1);
+    if( p ){
+      p->pageHash = 0;
+      sqlite3PagerUnrefNotNull(p);
+    }
+  }
+#endif
+
+  sqlite3BitvecDestroy(pPager->pInJournal);
+  pPager->pInJournal = 0;
+  pPager->nRec = 0;
+  if( rc==SQLITE_OK ){
+    if( MEMDB || pagerFlushOnCommit(pPager, bCommit) ){
+      sqlite3PcacheCleanAll(pPager->pPCache);
+    }else{
+      sqlite3PcacheClearWritable(pPager->pPCache);
+    }
+    sqlite3PcacheTruncate(pPager->pPCache, pPager->dbSize);
+  }
+
+  if( pagerUseWal(pPager) ){
+    /* Drop the WAL write-lock, if any. Also, if the connection was in 
+    ** locking_mode=exclusive mode but is no longer, drop the EXCLUSIVE 
+    ** lock held on the database file.
+    */
+    rc2 = sqlite3WalEndWriteTransaction(pPager->pWal);
+    assert( rc2==SQLITE_OK );
+  }else if( rc==SQLITE_OK && bCommit && pPager->dbFileSize>pPager->dbSize ){
+    /* This branch is taken when committing a transaction in rollback-journal
+    ** mode if the database file on disk is larger than the database image.
+    ** At this point the journal has been finalized and the transaction 
+    ** successfully committed, but the EXCLUSIVE lock is still held on the
+    ** file. So it is safe to truncate the database file to its minimum
+    ** required size.  */
+    assert( pPager->eLock==EXCLUSIVE_LOCK );
+    rc = pager_truncate(pPager, pPager->dbSize);
+  }
+
+  if( rc==SQLITE_OK && bCommit ){
+    rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_COMMIT_PHASETWO, 0);
+    if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK;
+  }
+
+  if( !pPager->exclusiveMode 
+   && (!pagerUseWal(pPager) || sqlite3WalExclusiveMode(pPager->pWal, 0))
+  ){
+    rc2 = pagerUnlockDb(pPager, SHARED_LOCK);
+  }
+  pPager->eState = PAGER_READER;
+  pPager->setSuper = 0;
+
+  return (rc==SQLITE_OK?rc2:rc);
+}
+
+/*
+** Execute a rollback if a transaction is active and unlock the 
+** database file. 
+**
+** If the pager has already entered the ERROR state, do not attempt 
+** the rollback at this time. Instead, pager_unlock() is called. The
+** call to pager_unlock() will discard all in-memory pages, unlock
+** the database file and move the pager back to OPEN state. If this 
+** means that there is a hot-journal left in the file-system, the next 
+** connection to obtain a shared lock on the pager (which may be this one) 
+** will roll it back.
+**
+** If the pager has not already entered the ERROR state, but an IO or
+** malloc error occurs during a rollback, then this will itself cause 
+** the pager to enter the ERROR state. Which will be cleared by the
+** call to pager_unlock(), as described above.
+*/
+static void pagerUnlockAndRollback(Pager *pPager){
+  if( pPager->eState!=PAGER_ERROR && pPager->eState!=PAGER_OPEN ){
+    assert( assert_pager_state(pPager) );
+    if( pPager->eState>=PAGER_WRITER_LOCKED ){
+      sqlite3BeginBenignMalloc();
+      sqlite3PagerRollback(pPager);
+      sqlite3EndBenignMalloc();
+    }else if( !pPager->exclusiveMode ){
+      assert( pPager->eState==PAGER_READER );
+      pager_end_transaction(pPager, 0, 0);
+    }
+  }
+  pager_unlock(pPager);
+}
+
+/*
+** Parameter aData must point to a buffer of pPager->pageSize bytes
+** of data. Compute and return a checksum based ont the contents of the 
+** page of data and the current value of pPager->cksumInit.
+**
+** This is not a real checksum. It is really just the sum of the 
+** random initial value (pPager->cksumInit) and every 200th byte
+** of the page data, starting with byte offset (pPager->pageSize%200).
+** Each byte is interpreted as an 8-bit unsigned integer.
+**
+** Changing the formula used to compute this checksum results in an
+** incompatible journal file format.
+**
+** If journal corruption occurs due to a power failure, the most likely 
+** scenario is that one end or the other of the record will be changed. 
+** It is much less likely that the two ends of the journal record will be
+** correct and the middle be corrupt.  Thus, this "checksum" scheme,
+** though fast and simple, catches the mostly likely kind of corruption.
+*/
+static u32 pager_cksum(Pager *pPager, const u8 *aData){
+  u32 cksum = pPager->cksumInit;         /* Checksum value to return */
+  int i = pPager->pageSize-200;          /* Loop counter */
+  while( i>0 ){
+    cksum += aData[i];
+    i -= 200;
+  }
+  return cksum;
+}
+
+/*
+** Read a single page from either the journal file (if isMainJrnl==1) or
+** from the sub-journal (if isMainJrnl==0) and playback that page.
+** The page begins at offset *pOffset into the file. The *pOffset
+** value is increased to the start of the next page in the journal.
+**
+** The main rollback journal uses checksums - the statement journal does 
+** not.
+**
+** If the page number of the page record read from the (sub-)journal file
+** is greater than the current value of Pager.dbSize, then playback is
+** skipped and SQLITE_OK is returned.
+**
+** If pDone is not NULL, then it is a record of pages that have already
+** been played back.  If the page at *pOffset has already been played back
+** (if the corresponding pDone bit is set) then skip the playback.
+** Make sure the pDone bit corresponding to the *pOffset page is set
+** prior to returning.
+**
+** If the page record is successfully read from the (sub-)journal file
+** and played back, then SQLITE_OK is returned. If an IO error occurs
+** while reading the record from the (sub-)journal file or while writing
+** to the database file, then the IO error code is returned. If data
+** is successfully read from the (sub-)journal file but appears to be
+** corrupted, SQLITE_DONE is returned. Data is considered corrupted in
+** two circumstances:
+** 
+**   * If the record page-number is illegal (0 or PAGER_SJ_PGNO), or
+**   * If the record is being rolled back from the main journal file
+**     and the checksum field does not match the record content.
+**
+** Neither of these two scenarios are possible during a savepoint rollback.
+**
+** If this is a savepoint rollback, then memory may have to be dynamically
+** allocated by this function. If this is the case and an allocation fails,
+** SQLITE_NOMEM is returned.
+*/
+static int pager_playback_one_page(
+  Pager *pPager,                /* The pager being played back */
+  i64 *pOffset,                 /* Offset of record to playback */
+  Bitvec *pDone,                /* Bitvec of pages already played back */
+  int isMainJrnl,               /* 1 -> main journal. 0 -> sub-journal. */
+  int isSavepnt                 /* True for a savepoint rollback */
+){
+  int rc;
+  PgHdr *pPg;                   /* An existing page in the cache */
+  Pgno pgno;                    /* The page number of a page in journal */
+  u32 cksum;                    /* Checksum used for sanity checking */
+  char *aData;                  /* Temporary storage for the page */
+  sqlite3_file *jfd;            /* The file descriptor for the journal file */
+  int isSynced;                 /* True if journal page is synced */
+
+  assert( (isMainJrnl&~1)==0 );      /* isMainJrnl is 0 or 1 */
+  assert( (isSavepnt&~1)==0 );       /* isSavepnt is 0 or 1 */
+  assert( isMainJrnl || pDone );     /* pDone always used on sub-journals */
+  assert( isSavepnt || pDone==0 );   /* pDone never used on non-savepoint */
+
+  aData = pPager->pTmpSpace;
+  assert( aData );         /* Temp storage must have already been allocated */
+  assert( pagerUseWal(pPager)==0 || (!isMainJrnl && isSavepnt) );
+
+  /* Either the state is greater than PAGER_WRITER_CACHEMOD (a transaction 
+  ** or savepoint rollback done at the request of the caller) or this is
+  ** a hot-journal rollback. If it is a hot-journal rollback, the pager
+  ** is in state OPEN and holds an EXCLUSIVE lock. Hot-journal rollback
+  ** only reads from the main journal, not the sub-journal.
+  */
+  assert( pPager->eState>=PAGER_WRITER_CACHEMOD
+       || (pPager->eState==PAGER_OPEN && pPager->eLock==EXCLUSIVE_LOCK)
+  );
+  assert( pPager->eState>=PAGER_WRITER_CACHEMOD || isMainJrnl );
+
+  /* Read the page number and page data from the journal or sub-journal
+  ** file. Return an error code to the caller if an IO error occurs.
+  */
+  jfd = isMainJrnl ? pPager->jfd : pPager->sjfd;
+  rc = read32bits(jfd, *pOffset, &pgno);
+  if( rc!=SQLITE_OK ) return rc;
+  rc = sqlite3OsRead(jfd, (u8*)aData, pPager->pageSize, (*pOffset)+4);
+  if( rc!=SQLITE_OK ) return rc;
+  *pOffset += pPager->pageSize + 4 + isMainJrnl*4;
+
+  /* Sanity checking on the page.  This is more important that I originally
+  ** thought.  If a power failure occurs while the journal is being written,
+  ** it could cause invalid data to be written into the journal.  We need to
+  ** detect this invalid data (with high probability) and ignore it.
+  */
+  if( pgno==0 || pgno==PAGER_SJ_PGNO(pPager) ){
+    assert( !isSavepnt );
+    return SQLITE_DONE;
+  }
+  if( pgno>(Pgno)pPager->dbSize || sqlite3BitvecTest(pDone, pgno) ){
+    return SQLITE_OK;
+  }
+  if( isMainJrnl ){
+    rc = read32bits(jfd, (*pOffset)-4, &cksum);
+    if( rc ) return rc;
+    if( !isSavepnt && pager_cksum(pPager, (u8*)aData)!=cksum ){
+      return SQLITE_DONE;
+    }
+  }
+
+  /* If this page has already been played back before during the current
+  ** rollback, then don't bother to play it back again.
+  */
+  if( pDone && (rc = sqlite3BitvecSet(pDone, pgno))!=SQLITE_OK ){
+    return rc;
+  }
+
+  /* When playing back page 1, restore the nReserve setting
+  */
+  if( pgno==1 && pPager->nReserve!=((u8*)aData)[20] ){
+    pPager->nReserve = ((u8*)aData)[20];
+  }
+
+  /* If the pager is in CACHEMOD state, then there must be a copy of this
+  ** page in the pager cache. In this case just update the pager cache,
+  ** not the database file. The page is left marked dirty in this case.
+  **
+  ** An exception to the above rule: If the database is in no-sync mode
+  ** and a page is moved during an incremental vacuum then the page may
+  ** not be in the pager cache. Later: if a malloc() or IO error occurs
+  ** during a Movepage() call, then the page may not be in the cache
+  ** either. So the condition described in the above paragraph is not
+  ** assert()able.
+  **
+  ** If in WRITER_DBMOD, WRITER_FINISHED or OPEN state, then we update the
+  ** pager cache if it exists and the main file. The page is then marked 
+  ** not dirty. Since this code is only executed in PAGER_OPEN state for
+  ** a hot-journal rollback, it is guaranteed that the page-cache is empty
+  ** if the pager is in OPEN state.
+  **
+  ** Ticket #1171:  The statement journal might contain page content that is
+  ** different from the page content at the start of the transaction.
+  ** This occurs when a page is changed prior to the start of a statement
+  ** then changed again within the statement.  When rolling back such a
+  ** statement we must not write to the original database unless we know
+  ** for certain that original page contents are synced into the main rollback
+  ** journal.  Otherwise, a power loss might leave modified data in the
+  ** database file without an entry in the rollback journal that can
+  ** restore the database to its original form.  Two conditions must be
+  ** met before writing to the database files. (1) the database must be
+  ** locked.  (2) we know that the original page content is fully synced
+  ** in the main journal either because the page is not in cache or else
+  ** the page is marked as needSync==0.
+  **
+  ** 2008-04-14:  When attempting to vacuum a corrupt database file, it
+  ** is possible to fail a statement on a database that does not yet exist.
+  ** Do not attempt to write if database file has never been opened.
+  */
+  if( pagerUseWal(pPager) ){
+    pPg = 0;
+  }else{
+    pPg = sqlite3PagerLookup(pPager, pgno);
+  }
+  assert( pPg || !MEMDB );
+  assert( pPager->eState!=PAGER_OPEN || pPg==0 || pPager->tempFile );
+  PAGERTRACE(("PLAYBACK %d page %d hash(%08x) %s\n",
+           PAGERID(pPager), pgno, pager_datahash(pPager->pageSize, (u8*)aData),
+           (isMainJrnl?"main-journal":"sub-journal")
+  ));
+  if( isMainJrnl ){
+    isSynced = pPager->noSync || (*pOffset <= pPager->journalHdr);
+  }else{
+    isSynced = (pPg==0 || 0==(pPg->flags & PGHDR_NEED_SYNC));
+  }
+  if( isOpen(pPager->fd)
+   && (pPager->eState>=PAGER_WRITER_DBMOD || pPager->eState==PAGER_OPEN)
+   && isSynced
+  ){
+    i64 ofst = (pgno-1)*(i64)pPager->pageSize;
+    testcase( !isSavepnt && pPg!=0 && (pPg->flags&PGHDR_NEED_SYNC)!=0 );
+    assert( !pagerUseWal(pPager) );
+
+    /* Write the data read from the journal back into the database file.
+    ** This is usually safe even for an encrypted database - as the data
+    ** was encrypted before it was written to the journal file. The exception
+    ** is if the data was just read from an in-memory sub-journal. In that
+    ** case it must be encrypted here before it is copied into the database
+    ** file.  */
+    rc = sqlite3OsWrite(pPager->fd, (u8 *)aData, pPager->pageSize, ofst);
+
+    if( pgno>pPager->dbFileSize ){
+      pPager->dbFileSize = pgno;
+    }
+    if( pPager->pBackup ){
+      sqlite3BackupUpdate(pPager->pBackup, pgno, (u8*)aData);
+    }
+  }else if( !isMainJrnl && pPg==0 ){
+    /* If this is a rollback of a savepoint and data was not written to
+    ** the database and the page is not in-memory, there is a potential
+    ** problem. When the page is next fetched by the b-tree layer, it 
+    ** will be read from the database file, which may or may not be 
+    ** current. 
+    **
+    ** There are a couple of different ways this can happen. All are quite
+    ** obscure. When running in synchronous mode, this can only happen 
+    ** if the page is on the free-list at the start of the transaction, then
+    ** populated, then moved using sqlite3PagerMovepage().
+    **
+    ** The solution is to add an in-memory page to the cache containing
+    ** the data just read from the sub-journal. Mark the page as dirty 
+    ** and if the pager requires a journal-sync, then mark the page as 
+    ** requiring a journal-sync before it is written.
+    */
+    assert( isSavepnt );
+    assert( (pPager->doNotSpill & SPILLFLAG_ROLLBACK)==0 );
+    pPager->doNotSpill |= SPILLFLAG_ROLLBACK;
+    rc = sqlite3PagerGet(pPager, pgno, &pPg, 1);
+    assert( (pPager->doNotSpill & SPILLFLAG_ROLLBACK)!=0 );
+    pPager->doNotSpill &= ~SPILLFLAG_ROLLBACK;
+    if( rc!=SQLITE_OK ) return rc;
+    sqlite3PcacheMakeDirty(pPg);
+  }
+  if( pPg ){
+    /* No page should ever be explicitly rolled back that is in use, except
+    ** for page 1 which is held in use in order to keep the lock on the
+    ** database active. However such a page may be rolled back as a result
+    ** of an internal error resulting in an automatic call to
+    ** sqlite3PagerRollback().
+    */
+    void *pData;
+    pData = pPg->pData;
+    memcpy(pData, (u8*)aData, pPager->pageSize);
+    pPager->xReiniter(pPg);
+    /* It used to be that sqlite3PcacheMakeClean(pPg) was called here.  But
+    ** that call was dangerous and had no detectable benefit since the cache
+    ** is normally cleaned by sqlite3PcacheCleanAll() after rollback and so
+    ** has been removed. */
+    pager_set_pagehash(pPg);
+
+    /* If this was page 1, then restore the value of Pager.dbFileVers.
+    ** Do this before any decoding. */
+    if( pgno==1 ){
+      memcpy(&pPager->dbFileVers, &((u8*)pData)[24],sizeof(pPager->dbFileVers));
+    }
+    sqlite3PcacheRelease(pPg);
+  }
+  return rc;
+}
+
+/*
+** Parameter zSuper is the name of a super-journal file. A single journal
+** file that referred to the super-journal file has just been rolled back.
+** This routine checks if it is possible to delete the super-journal file,
+** and does so if it is.
+**
+** Argument zSuper may point to Pager.pTmpSpace. So that buffer is not 
+** available for use within this function.
+**
+** When a super-journal file is created, it is populated with the names 
+** of all of its child journals, one after another, formatted as utf-8 
+** encoded text. The end of each child journal file is marked with a 
+** nul-terminator byte (0x00). i.e. the entire contents of a super-journal
+** file for a transaction involving two databases might be:
+**
+**   "/home/bill/a.db-journal\x00/home/bill/b.db-journal\x00"
+**
+** A super-journal file may only be deleted once all of its child 
+** journals have been rolled back.
+**
+** This function reads the contents of the super-journal file into 
+** memory and loops through each of the child journal names. For
+** each child journal, it checks if:
+**
+**   * if the child journal exists, and if so
+**   * if the child journal contains a reference to super-journal 
+**     file zSuper
+**
+** If a child journal can be found that matches both of the criteria
+** above, this function returns without doing anything. Otherwise, if
+** no such child journal can be found, file zSuper is deleted from
+** the file-system using sqlite3OsDelete().
+**
+** If an IO error within this function, an error code is returned. This
+** function allocates memory by calling sqlite3Malloc(). If an allocation
+** fails, SQLITE_NOMEM is returned. Otherwise, if no IO or malloc errors 
+** occur, SQLITE_OK is returned.
+**
+** TODO: This function allocates a single block of memory to load
+** the entire contents of the super-journal file. This could be
+** a couple of kilobytes or so - potentially larger than the page 
+** size.
+*/
+static int pager_delsuper(Pager *pPager, const char *zSuper){
+  sqlite3_vfs *pVfs = pPager->pVfs;
+  int rc;                   /* Return code */
+  sqlite3_file *pSuper;     /* Malloc'd super-journal file descriptor */
+  sqlite3_file *pJournal;   /* Malloc'd child-journal file descriptor */
+  char *zSuperJournal = 0;  /* Contents of super-journal file */
+  i64 nSuperJournal;        /* Size of super-journal file */
+  char *zJournal;           /* Pointer to one journal within MJ file */
+  char *zSuperPtr;          /* Space to hold super-journal filename */
+  char *zFree = 0;          /* Free this buffer */
+  int nSuperPtr;            /* Amount of space allocated to zSuperPtr[] */
+
+  /* Allocate space for both the pJournal and pSuper file descriptors.
+  ** If successful, open the super-journal file for reading.
+  */
+  pSuper = (sqlite3_file *)sqlite3MallocZero(pVfs->szOsFile * 2);
+  if( !pSuper ){
+    rc = SQLITE_NOMEM_BKPT;
+    pJournal = 0;
+  }else{
+    const int flags = (SQLITE_OPEN_READONLY|SQLITE_OPEN_SUPER_JOURNAL);
+    rc = sqlite3OsOpen(pVfs, zSuper, pSuper, flags, 0);
+    pJournal = (sqlite3_file *)(((u8 *)pSuper) + pVfs->szOsFile);
+  }
+  if( rc!=SQLITE_OK ) goto delsuper_out;
+
+  /* Load the entire super-journal file into space obtained from
+  ** sqlite3_malloc() and pointed to by zSuperJournal.   Also obtain
+  ** sufficient space (in zSuperPtr) to hold the names of super-journal
+  ** files extracted from regular rollback-journals.
+  */
+  rc = sqlite3OsFileSize(pSuper, &nSuperJournal);
+  if( rc!=SQLITE_OK ) goto delsuper_out;
+  nSuperPtr = pVfs->mxPathname+1;
+  zFree = sqlite3Malloc(4 + nSuperJournal + nSuperPtr + 2);
+  if( !zFree ){
+    rc = SQLITE_NOMEM_BKPT;
+    goto delsuper_out;
+  }
+  zFree[0] = zFree[1] = zFree[2] = zFree[3] = 0;
+  zSuperJournal = &zFree[4];
+  zSuperPtr = &zSuperJournal[nSuperJournal+2];
+  rc = sqlite3OsRead(pSuper, zSuperJournal, (int)nSuperJournal, 0);
+  if( rc!=SQLITE_OK ) goto delsuper_out;
+  zSuperJournal[nSuperJournal] = 0;
+  zSuperJournal[nSuperJournal+1] = 0;
+
+  zJournal = zSuperJournal;
+  while( (zJournal-zSuperJournal)<nSuperJournal ){
+    int exists;
+    rc = sqlite3OsAccess(pVfs, zJournal, SQLITE_ACCESS_EXISTS, &exists);
+    if( rc!=SQLITE_OK ){
+      goto delsuper_out;
+    }
+    if( exists ){
+      /* One of the journals pointed to by the super-journal exists.
+      ** Open it and check if it points at the super-journal. If
+      ** so, return without deleting the super-journal file.
+      ** NB:  zJournal is really a MAIN_JOURNAL.  But call it a 
+      ** SUPER_JOURNAL here so that the VFS will not send the zJournal
+      ** name into sqlite3_database_file_object().
+      */
+      int c;
+      int flags = (SQLITE_OPEN_READONLY|SQLITE_OPEN_SUPER_JOURNAL);
+      rc = sqlite3OsOpen(pVfs, zJournal, pJournal, flags, 0);
+      if( rc!=SQLITE_OK ){
+        goto delsuper_out;
+      }
+
+      rc = readSuperJournal(pJournal, zSuperPtr, nSuperPtr);
+      sqlite3OsClose(pJournal);
+      if( rc!=SQLITE_OK ){
+        goto delsuper_out;
+      }
+
+      c = zSuperPtr[0]!=0 && strcmp(zSuperPtr, zSuper)==0;
+      if( c ){
+        /* We have a match. Do not delete the super-journal file. */
+        goto delsuper_out;
+      }
+    }
+    zJournal += (sqlite3Strlen30(zJournal)+1);
+  }
+ 
+  sqlite3OsClose(pSuper);
+  rc = sqlite3OsDelete(pVfs, zSuper, 0);
+
+delsuper_out:
+  sqlite3_free(zFree);
+  if( pSuper ){
+    sqlite3OsClose(pSuper);
+    assert( !isOpen(pJournal) );
+    sqlite3_free(pSuper);
+  }
+  return rc;
+}
+
+
+/*
+** This function is used to change the actual size of the database 
+** file in the file-system. This only happens when committing a transaction,
+** or rolling back a transaction (including rolling back a hot-journal).
+**
+** If the main database file is not open, or the pager is not in either
+** DBMOD or OPEN state, this function is a no-op. Otherwise, the size 
+** of the file is changed to nPage pages (nPage*pPager->pageSize bytes). 
+** If the file on disk is currently larger than nPage pages, then use the VFS
+** xTruncate() method to truncate it.
+**
+** Or, it might be the case that the file on disk is smaller than 
+** nPage pages. Some operating system implementations can get confused if 
+** you try to truncate a file to some size that is larger than it 
+** currently is, so detect this case and write a single zero byte to 
+** the end of the new file instead.
+**
+** If successful, return SQLITE_OK. If an IO error occurs while modifying
+** the database file, return the error code to the caller.
+*/
+static int pager_truncate(Pager *pPager, Pgno nPage){
+  int rc = SQLITE_OK;
+  assert( pPager->eState!=PAGER_ERROR );
+  assert( pPager->eState!=PAGER_READER );
+  
+  if( isOpen(pPager->fd) 
+   && (pPager->eState>=PAGER_WRITER_DBMOD || pPager->eState==PAGER_OPEN) 
+  ){
+    i64 currentSize, newSize;
+    int szPage = pPager->pageSize;
+    assert( pPager->eLock==EXCLUSIVE_LOCK );
+    /* TODO: Is it safe to use Pager.dbFileSize here? */
+    rc = sqlite3OsFileSize(pPager->fd, &currentSize);
+    newSize = szPage*(i64)nPage;
+    if( rc==SQLITE_OK && currentSize!=newSize ){
+      if( currentSize>newSize ){
+        rc = sqlite3OsTruncate(pPager->fd, newSize);
+      }else if( (currentSize+szPage)<=newSize ){
+        char *pTmp = pPager->pTmpSpace;
+        memset(pTmp, 0, szPage);
+        testcase( (newSize-szPage) == currentSize );
+        testcase( (newSize-szPage) >  currentSize );
+        sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_SIZE_HINT, &newSize);
+        rc = sqlite3OsWrite(pPager->fd, pTmp, szPage, newSize-szPage);
+      }
+      if( rc==SQLITE_OK ){
+        pPager->dbFileSize = nPage;
+      }
+    }
+  }
+  return rc;
+}
+
+/*
+** Return a sanitized version of the sector-size of OS file pFile. The
+** return value is guaranteed to lie between 32 and MAX_SECTOR_SIZE.
+*/
+int sqlite3SectorSize(sqlite3_file *pFile){
+  int iRet = sqlite3OsSectorSize(pFile);
+  if( iRet<32 ){
+    iRet = 512;
+  }else if( iRet>MAX_SECTOR_SIZE ){
+    assert( MAX_SECTOR_SIZE>=512 );
+    iRet = MAX_SECTOR_SIZE;
+  }
+  return iRet;
+}
+
+/*
+** Set the value of the Pager.sectorSize variable for the given
+** pager based on the value returned by the xSectorSize method
+** of the open database file. The sector size will be used 
+** to determine the size and alignment of journal header and 
+** super-journal pointers within created journal files.
+**
+** For temporary files the effective sector size is always 512 bytes.
+**
+** Otherwise, for non-temporary files, the effective sector size is
+** the value returned by the xSectorSize() method rounded up to 32 if
+** it is less than 32, or rounded down to MAX_SECTOR_SIZE if it
+** is greater than MAX_SECTOR_SIZE.
+**
+** If the file has the SQLITE_IOCAP_POWERSAFE_OVERWRITE property, then set
+** the effective sector size to its minimum value (512).  The purpose of
+** pPager->sectorSize is to define the "blast radius" of bytes that
+** might change if a crash occurs while writing to a single byte in
+** that range.  But with POWERSAFE_OVERWRITE, the blast radius is zero
+** (that is what POWERSAFE_OVERWRITE means), so we minimize the sector
+** size.  For backwards compatibility of the rollback journal file format,
+** we cannot reduce the effective sector size below 512.
+*/
+static void setSectorSize(Pager *pPager){
+  assert( isOpen(pPager->fd) || pPager->tempFile );
+
+  if( pPager->tempFile
+   || (sqlite3OsDeviceCharacteristics(pPager->fd) & 
+              SQLITE_IOCAP_POWERSAFE_OVERWRITE)!=0
+  ){
+    /* Sector size doesn't matter for temporary files. Also, the file
+    ** may not have been opened yet, in which case the OsSectorSize()
+    ** call will segfault. */
+    pPager->sectorSize = 512;
+  }else{
+    pPager->sectorSize = sqlite3SectorSize(pPager->fd);
+  }
+}
+
+/*
+** Playback the journal and thus restore the database file to
+** the state it was in before we started making changes.  
+**
+** The journal file format is as follows: 
+**
+**  (1)  8 byte prefix.  A copy of aJournalMagic[].
+**  (2)  4 byte big-endian integer which is the number of valid page records
+**       in the journal.  If this value is 0xffffffff, then compute the
+**       number of page records from the journal size.
+**  (3)  4 byte big-endian integer which is the initial value for the 
+**       sanity checksum.
+**  (4)  4 byte integer which is the number of pages to truncate the
+**       database to during a rollback.
+**  (5)  4 byte big-endian integer which is the sector size.  The header
+**       is this many bytes in size.
+**  (6)  4 byte big-endian integer which is the page size.
+**  (7)  zero padding out to the next sector size.
+**  (8)  Zero or more pages instances, each as follows:
+**        +  4 byte page number.
+**        +  pPager->pageSize bytes of data.
+**        +  4 byte checksum
+**
+** When we speak of the journal header, we mean the first 7 items above.
+** Each entry in the journal is an instance of the 8th item.
+**
+** Call the value from the second bullet "nRec".  nRec is the number of
+** valid page entries in the journal.  In most cases, you can compute the
+** value of nRec from the size of the journal file.  But if a power
+** failure occurred while the journal was being written, it could be the
+** case that the size of the journal file had already been increased but
+** the extra entries had not yet made it safely to disk.  In such a case,
+** the value of nRec computed from the file size would be too large.  For
+** that reason, we always use the nRec value in the header.
+**
+** If the nRec value is 0xffffffff it means that nRec should be computed
+** from the file size.  This value is used when the user selects the
+** no-sync option for the journal.  A power failure could lead to corruption
+** in this case.  But for things like temporary table (which will be
+** deleted when the power is restored) we don't care.  
+**
+** If the file opened as the journal file is not a well-formed
+** journal file then all pages up to the first corrupted page are rolled
+** back (or no pages if the journal header is corrupted). The journal file
+** is then deleted and SQLITE_OK returned, just as if no corruption had
+** been encountered.
+**
+** If an I/O or malloc() error occurs, the journal-file is not deleted
+** and an error code is returned.
+**
+** The isHot parameter indicates that we are trying to rollback a journal
+** that might be a hot journal.  Or, it could be that the journal is 
+** preserved because of JOURNALMODE_PERSIST or JOURNALMODE_TRUNCATE.
+** If the journal really is hot, reset the pager cache prior rolling
+** back any content.  If the journal is merely persistent, no reset is
+** needed.
+*/
+static int pager_playback(Pager *pPager, int isHot){
+  sqlite3_vfs *pVfs = pPager->pVfs;
+  i64 szJ;                 /* Size of the journal file in bytes */
+  u32 nRec;                /* Number of Records in the journal */
+  u32 u;                   /* Unsigned loop counter */
+  Pgno mxPg = 0;           /* Size of the original file in pages */
+  int rc;                  /* Result code of a subroutine */
+  int res = 1;             /* Value returned by sqlite3OsAccess() */
+  char *zSuper = 0;        /* Name of super-journal file if any */
+  int needPagerReset;      /* True to reset page prior to first page rollback */
+  int nPlayback = 0;       /* Total number of pages restored from journal */
+  u32 savedPageSize = pPager->pageSize;
+
+  /* Figure out how many records are in the journal.  Abort early if
+  ** the journal is empty.
+  */
+  assert( isOpen(pPager->jfd) );
+  rc = sqlite3OsFileSize(pPager->jfd, &szJ);
+  if( rc!=SQLITE_OK ){
+    goto end_playback;
+  }
+
+  /* Read the super-journal name from the journal, if it is present.
+  ** If a super-journal file name is specified, but the file is not
+  ** present on disk, then the journal is not hot and does not need to be
+  ** played back.
+  **
+  ** TODO: Technically the following is an error because it assumes that
+  ** buffer Pager.pTmpSpace is (mxPathname+1) bytes or larger. i.e. that
+  ** (pPager->pageSize >= pPager->pVfs->mxPathname+1). Using os_unix.c,
+  ** mxPathname is 512, which is the same as the minimum allowable value
+  ** for pageSize.
+  */
+  zSuper = pPager->pTmpSpace;
+  rc = readSuperJournal(pPager->jfd, zSuper, pPager->pVfs->mxPathname+1);
+  if( rc==SQLITE_OK && zSuper[0] ){
+    rc = sqlite3OsAccess(pVfs, zSuper, SQLITE_ACCESS_EXISTS, &res);
+  }
+  zSuper = 0;
+  if( rc!=SQLITE_OK || !res ){
+    goto end_playback;
+  }
+  pPager->journalOff = 0;
+  needPagerReset = isHot;
+
+  /* This loop terminates either when a readJournalHdr() or 
+  ** pager_playback_one_page() call returns SQLITE_DONE or an IO error 
+  ** occurs. 
+  */
+  while( 1 ){
+    /* Read the next journal header from the journal file.  If there are
+    ** not enough bytes left in the journal file for a complete header, or
+    ** it is corrupted, then a process must have failed while writing it.
+    ** This indicates nothing more needs to be rolled back.
+    */
+    rc = readJournalHdr(pPager, isHot, szJ, &nRec, &mxPg);
+    if( rc!=SQLITE_OK ){ 
+      if( rc==SQLITE_DONE ){
+        rc = SQLITE_OK;
+      }
+      goto end_playback;
+    }
+
+    /* If nRec is 0xffffffff, then this journal was created by a process
+    ** working in no-sync mode. This means that the rest of the journal
+    ** file consists of pages, there are no more journal headers. Compute
+    ** the value of nRec based on this assumption.
+    */
+    if( nRec==0xffffffff ){
+      assert( pPager->journalOff==JOURNAL_HDR_SZ(pPager) );
+      nRec = (int)((szJ - JOURNAL_HDR_SZ(pPager))/JOURNAL_PG_SZ(pPager));
+    }
+
+    /* If nRec is 0 and this rollback is of a transaction created by this
+    ** process and if this is the final header in the journal, then it means
+    ** that this part of the journal was being filled but has not yet been
+    ** synced to disk.  Compute the number of pages based on the remaining
+    ** size of the file.
+    **
+    ** The third term of the test was added to fix ticket #2565.
+    ** When rolling back a hot journal, nRec==0 always means that the next
+    ** chunk of the journal contains zero pages to be rolled back.  But
+    ** when doing a ROLLBACK and the nRec==0 chunk is the last chunk in
+    ** the journal, it means that the journal might contain additional
+    ** pages that need to be rolled back and that the number of pages 
+    ** should be computed based on the journal file size.
+    */
+    if( nRec==0 && !isHot &&
+        pPager->journalHdr+JOURNAL_HDR_SZ(pPager)==pPager->journalOff ){
+      nRec = (int)((szJ - pPager->journalOff) / JOURNAL_PG_SZ(pPager));
+    }
+
+    /* If this is the first header read from the journal, truncate the
+    ** database file back to its original size.
+    */
+    if( pPager->journalOff==JOURNAL_HDR_SZ(pPager) ){
+      rc = pager_truncate(pPager, mxPg);
+      if( rc!=SQLITE_OK ){
+        goto end_playback;
+      }
+      pPager->dbSize = mxPg;
+      if( pPager->mxPgno<mxPg ){
+        pPager->mxPgno = mxPg;
+      }
+    }
+
+    /* Copy original pages out of the journal and back into the 
+    ** database file and/or page cache.
+    */
+    for(u=0; u<nRec; u++){
+      if( needPagerReset ){
+        pager_reset(pPager);
+        needPagerReset = 0;
+      }
+      rc = pager_playback_one_page(pPager,&pPager->journalOff,0,1,0);
+      if( rc==SQLITE_OK ){
+        nPlayback++;
+      }else{
+        if( rc==SQLITE_DONE ){
+          pPager->journalOff = szJ;
+          break;
+        }else if( rc==SQLITE_IOERR_SHORT_READ ){
+          /* If the journal has been truncated, simply stop reading and
+          ** processing the journal. This might happen if the journal was
+          ** not completely written and synced prior to a crash.  In that
+          ** case, the database should have never been written in the
+          ** first place so it is OK to simply abandon the rollback. */
+          rc = SQLITE_OK;
+          goto end_playback;
+        }else{
+          /* If we are unable to rollback, quit and return the error
+          ** code.  This will cause the pager to enter the error state
+          ** so that no further harm will be done.  Perhaps the next
+          ** process to come along will be able to rollback the database.
+          */
+          goto end_playback;
+        }
+      }
+    }
+  }
+  /*NOTREACHED*/
+  assert( 0 );
+
+end_playback:
+  if( rc==SQLITE_OK ){
+    rc = sqlite3PagerSetPagesize(pPager, &savedPageSize, -1);
+  }
+  /* Following a rollback, the database file should be back in its original
+  ** state prior to the start of the transaction, so invoke the
+  ** SQLITE_FCNTL_DB_UNCHANGED file-control method to disable the
+  ** assertion that the transaction counter was modified.
+  */
+#ifdef SQLITE_DEBUG
+  sqlite3OsFileControlHint(pPager->fd,SQLITE_FCNTL_DB_UNCHANGED,0);
+#endif
+
+  /* If this playback is happening automatically as a result of an IO or 
+  ** malloc error that occurred after the change-counter was updated but 
+  ** before the transaction was committed, then the change-counter 
+  ** modification may just have been reverted. If this happens in exclusive 
+  ** mode, then subsequent transactions performed by the connection will not
+  ** update the change-counter at all. This may lead to cache inconsistency
+  ** problems for other processes at some point in the future. So, just
+  ** in case this has happened, clear the changeCountDone flag now.
+  */
+  pPager->changeCountDone = pPager->tempFile;
+
+  if( rc==SQLITE_OK ){
+    /* Leave 4 bytes of space before the super-journal filename in memory.
+    ** This is because it may end up being passed to sqlite3OsOpen(), in
+    ** which case it requires 4 0x00 bytes in memory immediately before
+    ** the filename. */
+    zSuper = &pPager->pTmpSpace[4];
+    rc = readSuperJournal(pPager->jfd, zSuper, pPager->pVfs->mxPathname+1);
+    testcase( rc!=SQLITE_OK );
+  }
+  if( rc==SQLITE_OK
+   && (pPager->eState>=PAGER_WRITER_DBMOD || pPager->eState==PAGER_OPEN)
+  ){
+    rc = sqlite3PagerSync(pPager, 0);
+  }
+  if( rc==SQLITE_OK ){
+    rc = pager_end_transaction(pPager, zSuper[0]!='\0', 0);
+    testcase( rc!=SQLITE_OK );
+  }
+  if( rc==SQLITE_OK && zSuper[0] && res ){
+    /* If there was a super-journal and this routine will return success,
+    ** see if it is possible to delete the super-journal.
+    */
+    assert( zSuper==&pPager->pTmpSpace[4] );
+    memset(&zSuper[-4], 0, 4);
+    rc = pager_delsuper(pPager, zSuper);
+    testcase( rc!=SQLITE_OK );
+  }
+  if( isHot && nPlayback ){
+    sqlite3_log(SQLITE_NOTICE_RECOVER_ROLLBACK, "recovered %d pages from %s",
+                nPlayback, pPager->zJournal);
+  }
+
+  /* The Pager.sectorSize variable may have been updated while rolling
+  ** back a journal created by a process with a different sector size
+  ** value. Reset it to the correct value for this process.
+  */
+  setSectorSize(pPager);
+  return rc;
+}
+
+
+/*
+** Read the content for page pPg out of the database file (or out of
+** the WAL if that is where the most recent copy if found) into 
+** pPg->pData. A shared lock or greater must be held on the database
+** file before this function is called.
+**
+** If page 1 is read, then the value of Pager.dbFileVers[] is set to
+** the value read from the database file.
+**
+** If an IO error occurs, then the IO error is returned to the caller.
+** Otherwise, SQLITE_OK is returned.
+*/
+static int readDbPage(PgHdr *pPg){
+  Pager *pPager = pPg->pPager; /* Pager object associated with page pPg */
+  int rc = SQLITE_OK;          /* Return code */
+
+#ifndef SQLITE_OMIT_WAL
+  u32 iFrame = 0;              /* Frame of WAL containing pgno */
+
+  assert( pPager->eState>=PAGER_READER && !MEMDB );
+  assert( isOpen(pPager->fd) );
+
+  if( pagerUseWal(pPager) ){
+    rc = sqlite3WalFindFrame(pPager->pWal, pPg->pgno, &iFrame);
+    if( rc ) return rc;
+  }
+  if( iFrame ){
+    rc = sqlite3WalReadFrame(pPager->pWal, iFrame,pPager->pageSize,pPg->pData);
+  }else
+#endif
+  {
+    i64 iOffset = (pPg->pgno-1)*(i64)pPager->pageSize;
+    rc = sqlite3OsRead(pPager->fd, pPg->pData, pPager->pageSize, iOffset);
+    if( rc==SQLITE_IOERR_SHORT_READ ){
+      rc = SQLITE_OK;
+    }
+  }
+
+  if( pPg->pgno==1 ){
+    if( rc ){
+      /* If the read is unsuccessful, set the dbFileVers[] to something
+      ** that will never be a valid file version.  dbFileVers[] is a copy
+      ** of bytes 24..39 of the database.  Bytes 28..31 should always be
+      ** zero or the size of the database in page. Bytes 32..35 and 35..39
+      ** should be page numbers which are never 0xffffffff.  So filling
+      ** pPager->dbFileVers[] with all 0xff bytes should suffice.
+      **
+      ** For an encrypted database, the situation is more complex:  bytes
+      ** 24..39 of the database are white noise.  But the probability of
+      ** white noise equaling 16 bytes of 0xff is vanishingly small so
+      ** we should still be ok.
+      */
+      memset(pPager->dbFileVers, 0xff, sizeof(pPager->dbFileVers));
+    }else{
+      u8 *dbFileVers = &((u8*)pPg->pData)[24];
+      memcpy(&pPager->dbFileVers, dbFileVers, sizeof(pPager->dbFileVers));
+    }
+  }
+  PAGER_INCR(sqlite3_pager_readdb_count);
+  PAGER_INCR(pPager->nRead);
+  IOTRACE(("PGIN %p %d\n", pPager, pPg->pgno));
+  PAGERTRACE(("FETCH %d page %d hash(%08x)\n",
+               PAGERID(pPager), pPg->pgno, pager_pagehash(pPg)));
+
+  return rc;
+}
+
+/*
+** Update the value of the change-counter at offsets 24 and 92 in
+** the header and the sqlite version number at offset 96.
+**
+** This is an unconditional update.  See also the pager_incr_changecounter()
+** routine which only updates the change-counter if the update is actually
+** needed, as determined by the pPager->changeCountDone state variable.
+*/
+static void pager_write_changecounter(PgHdr *pPg){
+  u32 change_counter;
+  if( NEVER(pPg==0) ) return;
+
+  /* Increment the value just read and write it back to byte 24. */
+  change_counter = sqlite3Get4byte((u8*)pPg->pPager->dbFileVers)+1;
+  put32bits(((char*)pPg->pData)+24, change_counter);
+
+  /* Also store the SQLite version number in bytes 96..99 and in
+  ** bytes 92..95 store the change counter for which the version number
+  ** is valid. */
+  put32bits(((char*)pPg->pData)+92, change_counter);
+  put32bits(((char*)pPg->pData)+96, SQLITE_VERSION_NUMBER);
+}
+
+#ifndef SQLITE_OMIT_WAL
+/*
+** This function is invoked once for each page that has already been 
+** written into the log file when a WAL transaction is rolled back.
+** Parameter iPg is the page number of said page. The pCtx argument 
+** is actually a pointer to the Pager structure.
+**
+** If page iPg is present in the cache, and has no outstanding references,
+** it is discarded. Otherwise, if there are one or more outstanding
+** references, the page content is reloaded from the database. If the
+** attempt to reload content from the database is required and fails, 
+** return an SQLite error code. Otherwise, SQLITE_OK.
+*/
+static int pagerUndoCallback(void *pCtx, Pgno iPg){
+  int rc = SQLITE_OK;
+  Pager *pPager = (Pager *)pCtx;
+  PgHdr *pPg;
+
+  assert( pagerUseWal(pPager) );
+  pPg = sqlite3PagerLookup(pPager, iPg);
+  if( pPg ){
+    if( sqlite3PcachePageRefcount(pPg)==1 ){
+      sqlite3PcacheDrop(pPg);
+    }else{
+      rc = readDbPage(pPg);
+      if( rc==SQLITE_OK ){
+        pPager->xReiniter(pPg);
+      }
+      sqlite3PagerUnrefNotNull(pPg);
+    }
+  }
+
+  /* Normally, if a transaction is rolled back, any backup processes are
+  ** updated as data is copied out of the rollback journal and into the
+  ** database. This is not generally possible with a WAL database, as
+  ** rollback involves simply truncating the log file. Therefore, if one
+  ** or more frames have already been written to the log (and therefore 
+  ** also copied into the backup databases) as part of this transaction,
+  ** the backups must be restarted.
+  */
+  sqlite3BackupRestart(pPager->pBackup);
+
+  return rc;
+}
+
+/*
+** This function is called to rollback a transaction on a WAL database.
+*/
+static int pagerRollbackWal(Pager *pPager){
+  int rc;                         /* Return Code */
+  PgHdr *pList;                   /* List of dirty pages to revert */
+
+  /* For all pages in the cache that are currently dirty or have already
+  ** been written (but not committed) to the log file, do one of the 
+  ** following:
+  **
+  **   + Discard the cached page (if refcount==0), or
+  **   + Reload page content from the database (if refcount>0).
+  */
+  pPager->dbSize = pPager->dbOrigSize;
+  rc = sqlite3WalUndo(pPager->pWal, pagerUndoCallback, (void *)pPager);
+  pList = sqlite3PcacheDirtyList(pPager->pPCache);
+  while( pList && rc==SQLITE_OK ){
+    PgHdr *pNext = pList->pDirty;
+    rc = pagerUndoCallback((void *)pPager, pList->pgno);
+    pList = pNext;
+  }
+
+  return rc;
+}
+
+/*
+** This function is a wrapper around sqlite3WalFrames(). As well as logging
+** the contents of the list of pages headed by pList (connected by pDirty),
+** this function notifies any active backup processes that the pages have
+** changed. 
+**
+** The list of pages passed into this routine is always sorted by page number.
+** Hence, if page 1 appears anywhere on the list, it will be the first page.
+*/ 
+static int pagerWalFrames(
+  Pager *pPager,                  /* Pager object */
+  PgHdr *pList,                   /* List of frames to log */
+  Pgno nTruncate,                 /* Database size after this commit */
+  int isCommit                    /* True if this is a commit */
+){
+  int rc;                         /* Return code */
+  int nList;                      /* Number of pages in pList */
+  PgHdr *p;                       /* For looping over pages */
+
+  assert( pPager->pWal );
+  assert( pList );
+#ifdef SQLITE_DEBUG
+  /* Verify that the page list is in accending order */
+  for(p=pList; p && p->pDirty; p=p->pDirty){
+    assert( p->pgno < p->pDirty->pgno );
+  }
+#endif
+
+  assert( pList->pDirty==0 || isCommit );
+  if( isCommit ){
+    /* If a WAL transaction is being committed, there is no point in writing
+    ** any pages with page numbers greater than nTruncate into the WAL file.
+    ** They will never be read by any client. So remove them from the pDirty
+    ** list here. */
+    PgHdr **ppNext = &pList;
+    nList = 0;
+    for(p=pList; (*ppNext = p)!=0; p=p->pDirty){
+      if( p->pgno<=nTruncate ){
+        ppNext = &p->pDirty;
+        nList++;
+      }
+    }
+    assert( pList );
+  }else{
+    nList = 1;
+  }
+  pPager->aStat[PAGER_STAT_WRITE] += nList;
+
+  if( pList->pgno==1 ) pager_write_changecounter(pList);
+  rc = sqlite3WalFrames(pPager->pWal, 
+      pPager->pageSize, pList, nTruncate, isCommit, pPager->walSyncFlags
+  );
+  if( rc==SQLITE_OK && pPager->pBackup ){
+    for(p=pList; p; p=p->pDirty){
+      sqlite3BackupUpdate(pPager->pBackup, p->pgno, (u8 *)p->pData);
+    }
+  }
+
+#ifdef SQLITE_CHECK_PAGES
+  pList = sqlite3PcacheDirtyList(pPager->pPCache);
+  for(p=pList; p; p=p->pDirty){
+    pager_set_pagehash(p);
+  }
+#endif
+
+  return rc;
+}
+
+/*
+** Begin a read transaction on the WAL.
+**
+** This routine used to be called "pagerOpenSnapshot()" because it essentially
+** makes a snapshot of the database at the current point in time and preserves
+** that snapshot for use by the reader in spite of concurrently changes by
+** other writers or checkpointers.
+*/
+static int pagerBeginReadTransaction(Pager *pPager){
+  int rc;                         /* Return code */
+  int changed = 0;                /* True if cache must be reset */
+
+  assert( pagerUseWal(pPager) );
+  assert( pPager->eState==PAGER_OPEN || pPager->eState==PAGER_READER );
+
+  /* sqlite3WalEndReadTransaction() was not called for the previous
+  ** transaction in locking_mode=EXCLUSIVE.  So call it now.  If we
+  ** are in locking_mode=NORMAL and EndRead() was previously called,
+  ** the duplicate call is harmless.
+  */
+  sqlite3WalEndReadTransaction(pPager->pWal);
+
+  rc = sqlite3WalBeginReadTransaction(pPager->pWal, &changed);
+  if( rc!=SQLITE_OK || changed ){
+    pager_reset(pPager);
+    if( USEFETCH(pPager) ) sqlite3OsUnfetch(pPager->fd, 0, 0);
+  }
+
+  return rc;
+}
+#endif
+
+/*
+** This function is called as part of the transition from PAGER_OPEN
+** to PAGER_READER state to determine the size of the database file
+** in pages (assuming the page size currently stored in Pager.pageSize).
+**
+** If no error occurs, SQLITE_OK is returned and the size of the database
+** in pages is stored in *pnPage. Otherwise, an error code (perhaps
+** SQLITE_IOERR_FSTAT) is returned and *pnPage is left unmodified.
+*/
+static int pagerPagecount(Pager *pPager, Pgno *pnPage){
+  Pgno nPage;                     /* Value to return via *pnPage */
+
+  /* Query the WAL sub-system for the database size. The WalDbsize()
+  ** function returns zero if the WAL is not open (i.e. Pager.pWal==0), or
+  ** if the database size is not available. The database size is not
+  ** available from the WAL sub-system if the log file is empty or
+  ** contains no valid committed transactions.
+  */
+  assert( pPager->eState==PAGER_OPEN );
+  assert( pPager->eLock>=SHARED_LOCK );
+  assert( isOpen(pPager->fd) );
+  assert( pPager->tempFile==0 );
+  nPage = sqlite3WalDbsize(pPager->pWal);
+
+  /* If the number of pages in the database is not available from the
+  ** WAL sub-system, determine the page count based on the size of
+  ** the database file.  If the size of the database file is not an
+  ** integer multiple of the page-size, round up the result.
+  */
+  if( nPage==0 && ALWAYS(isOpen(pPager->fd)) ){
+    i64 n = 0;                    /* Size of db file in bytes */
+    int rc = sqlite3OsFileSize(pPager->fd, &n);
+    if( rc!=SQLITE_OK ){
+      return rc;
+    }
+    nPage = (Pgno)((n+pPager->pageSize-1) / pPager->pageSize);
+  }
+
+  /* If the current number of pages in the file is greater than the
+  ** configured maximum pager number, increase the allowed limit so
+  ** that the file can be read.
+  */
+  if( nPage>pPager->mxPgno ){
+    pPager->mxPgno = (Pgno)nPage;
+  }
+
+  *pnPage = nPage;
+  return SQLITE_OK;
+}
+
+#ifndef SQLITE_OMIT_WAL
+/*
+** Check if the *-wal file that corresponds to the database opened by pPager
+** exists if the database is not empy, or verify that the *-wal file does
+** not exist (by deleting it) if the database file is empty.
+**
+** If the database is not empty and the *-wal file exists, open the pager
+** in WAL mode.  If the database is empty or if no *-wal file exists and
+** if no error occurs, make sure Pager.journalMode is not set to
+** PAGER_JOURNALMODE_WAL.
+**
+** Return SQLITE_OK or an error code.
+**
+** The caller must hold a SHARED lock on the database file to call this
+** function. Because an EXCLUSIVE lock on the db file is required to delete 
+** a WAL on a none-empty database, this ensures there is no race condition 
+** between the xAccess() below and an xDelete() being executed by some 
+** other connection.
+*/
+static int pagerOpenWalIfPresent(Pager *pPager){
+  int rc = SQLITE_OK;
+  assert( pPager->eState==PAGER_OPEN );
+  assert( pPager->eLock>=SHARED_LOCK );
+
+  if( !pPager->tempFile ){
+    int isWal;                    /* True if WAL file exists */
+    rc = sqlite3OsAccess(
+        pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &isWal
+    );
+    if( rc==SQLITE_OK ){
+      if( isWal ){
+        Pgno nPage;                   /* Size of the database file */
+
+        rc = pagerPagecount(pPager, &nPage);
+        if( rc ) return rc;
+        if( nPage==0 ){
+          rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0);
+        }else{
+          testcase( sqlite3PcachePagecount(pPager->pPCache)==0 );
+          rc = sqlite3PagerOpenWal(pPager, 0);
+        }
+      }else if( pPager->journalMode==PAGER_JOURNALMODE_WAL ){
+        pPager->journalMode = PAGER_JOURNALMODE_DELETE;
+      }
+    }
+  }
+  return rc;
+}
+#endif
+
+/*
+** Playback savepoint pSavepoint. Or, if pSavepoint==NULL, then playback
+** the entire super-journal file. The case pSavepoint==NULL occurs when 
+** a ROLLBACK TO command is invoked on a SAVEPOINT that is a transaction 
+** savepoint.
+**
+** When pSavepoint is not NULL (meaning a non-transaction savepoint is 
+** being rolled back), then the rollback consists of up to three stages,
+** performed in the order specified:
+**
+**   * Pages are played back from the main journal starting at byte
+**     offset PagerSavepoint.iOffset and continuing to 
+**     PagerSavepoint.iHdrOffset, or to the end of the main journal
+**     file if PagerSavepoint.iHdrOffset is zero.
+**
+**   * If PagerSavepoint.iHdrOffset is not zero, then pages are played
+**     back starting from the journal header immediately following 
+**     PagerSavepoint.iHdrOffset to the end of the main journal file.
+**
+**   * Pages are then played back from the sub-journal file, starting
+**     with the PagerSavepoint.iSubRec and continuing to the end of
+**     the journal file.
+**
+** Throughout the rollback process, each time a page is rolled back, the
+** corresponding bit is set in a bitvec structure (variable pDone in the
+** implementation below). This is used to ensure that a page is only
+** rolled back the first time it is encountered in either journal.
+**
+** If pSavepoint is NULL, then pages are only played back from the main
+** journal file. There is no need for a bitvec in this case.
+**
+** In either case, before playback commences the Pager.dbSize variable
+** is reset to the value that it held at the start of the savepoint 
+** (or transaction). No page with a page-number greater than this value
+** is played back. If one is encountered it is simply skipped.
+*/
+static int pagerPlaybackSavepoint(Pager *pPager, PagerSavepoint *pSavepoint){
+  i64 szJ;                 /* Effective size of the main journal */
+  i64 iHdrOff;             /* End of first segment of main-journal records */
+  int rc = SQLITE_OK;      /* Return code */
+  Bitvec *pDone = 0;       /* Bitvec to ensure pages played back only once */
+
+  assert( pPager->eState!=PAGER_ERROR );
+  assert( pPager->eState>=PAGER_WRITER_LOCKED );
+
+  /* Allocate a bitvec to use to store the set of pages rolled back */
+  if( pSavepoint ){
+    pDone = sqlite3BitvecCreate(pSavepoint->nOrig);
+    if( !pDone ){
+      return SQLITE_NOMEM_BKPT;
+    }
+  }
+
+  /* Set the database size back to the value it was before the savepoint 
+  ** being reverted was opened.
+  */
+  pPager->dbSize = pSavepoint ? pSavepoint->nOrig : pPager->dbOrigSize;
+  pPager->changeCountDone = pPager->tempFile;
+
+  if( !pSavepoint && pagerUseWal(pPager) ){
+    return pagerRollbackWal(pPager);
+  }
+
+  /* Use pPager->journalOff as the effective size of the main rollback
+  ** journal.  The actual file might be larger than this in
+  ** PAGER_JOURNALMODE_TRUNCATE or PAGER_JOURNALMODE_PERSIST.  But anything
+  ** past pPager->journalOff is off-limits to us.
+  */
+  szJ = pPager->journalOff;
+  assert( pagerUseWal(pPager)==0 || szJ==0 );
+
+  /* Begin by rolling back records from the main journal starting at
+  ** PagerSavepoint.iOffset and continuing to the next journal header.
+  ** There might be records in the main journal that have a page number
+  ** greater than the current database size (pPager->dbSize) but those
+  ** will be skipped automatically.  Pages are added to pDone as they
+  ** are played back.
+  */
+  if( pSavepoint && !pagerUseWal(pPager) ){
+    iHdrOff = pSavepoint->iHdrOffset ? pSavepoint->iHdrOffset : szJ;
+    pPager->journalOff = pSavepoint->iOffset;
+    while( rc==SQLITE_OK && pPager->journalOff<iHdrOff ){
+      rc = pager_playback_one_page(pPager, &pPager->journalOff, pDone, 1, 1);
+    }
+    assert( rc!=SQLITE_DONE );
+  }else{
+    pPager->journalOff = 0;
+  }
+
+  /* Continue rolling back records out of the main journal starting at
+  ** the first journal header seen and continuing until the effective end
+  ** of the main journal file.  Continue to skip out-of-range pages and
+  ** continue adding pages rolled back to pDone.
+  */
+  while( rc==SQLITE_OK && pPager->journalOff<szJ ){
+    u32 ii;            /* Loop counter */
+    u32 nJRec = 0;     /* Number of Journal Records */
+    u32 dummy;
+    rc = readJournalHdr(pPager, 0, szJ, &nJRec, &dummy);
+    assert( rc!=SQLITE_DONE );
+
+    /*
+    ** The "pPager->journalHdr+JOURNAL_HDR_SZ(pPager)==pPager->journalOff"
+    ** test is related to ticket #2565.  See the discussion in the
+    ** pager_playback() function for additional information.
+    */
+    if( nJRec==0 
+     && pPager->journalHdr+JOURNAL_HDR_SZ(pPager)==pPager->journalOff
+    ){
+      nJRec = (u32)((szJ - pPager->journalOff)/JOURNAL_PG_SZ(pPager));
+    }
+    for(ii=0; rc==SQLITE_OK && ii<nJRec && pPager->journalOff<szJ; ii++){
+      rc = pager_playback_one_page(pPager, &pPager->journalOff, pDone, 1, 1);
+    }
+    assert( rc!=SQLITE_DONE );
+  }
+  assert( rc!=SQLITE_OK || pPager->journalOff>=szJ );
+
+  /* Finally,  rollback pages from the sub-journal.  Page that were
+  ** previously rolled back out of the main journal (and are hence in pDone)
+  ** will be skipped.  Out-of-range pages are also skipped.
+  */
+  if( pSavepoint ){
+    u32 ii;            /* Loop counter */
+    i64 offset = (i64)pSavepoint->iSubRec*(4+pPager->pageSize);
+
+    if( pagerUseWal(pPager) ){
+      rc = sqlite3WalSavepointUndo(pPager->pWal, pSavepoint->aWalData);
+    }
+    for(ii=pSavepoint->iSubRec; rc==SQLITE_OK && ii<pPager->nSubRec; ii++){
+      assert( offset==(i64)ii*(4+pPager->pageSize) );
+      rc = pager_playback_one_page(pPager, &offset, pDone, 0, 1);
+    }
+    assert( rc!=SQLITE_DONE );
+  }
+
+  sqlite3BitvecDestroy(pDone);
+  if( rc==SQLITE_OK ){
+    pPager->journalOff = szJ;
+  }
+
+  return rc;
+}
+
+/*
+** Change the maximum number of in-memory pages that are allowed
+** before attempting to recycle clean and unused pages.
+*/
+void sqlite3PagerSetCachesize(Pager *pPager, int mxPage){
+  sqlite3PcacheSetCachesize(pPager->pPCache, mxPage);
+}
+
+/*
+** Change the maximum number of in-memory pages that are allowed
+** before attempting to spill pages to journal.
+*/
+int sqlite3PagerSetSpillsize(Pager *pPager, int mxPage){
+  return sqlite3PcacheSetSpillsize(pPager->pPCache, mxPage);
+}
+
+/*
+** Invoke SQLITE_FCNTL_MMAP_SIZE based on the current value of szMmap.
+*/
+static void pagerFixMaplimit(Pager *pPager){
+#if SQLITE_MAX_MMAP_SIZE>0
+  sqlite3_file *fd = pPager->fd;
+  if( isOpen(fd) && fd->pMethods->iVersion>=3 ){
+    sqlite3_int64 sz;
+    sz = pPager->szMmap;
+    pPager->bUseFetch = (sz>0);
+    setGetterMethod(pPager);
+    sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_MMAP_SIZE, &sz);
+  }
+#endif
+}
+
+/*
+** Change the maximum size of any memory mapping made of the database file.
+*/
+void sqlite3PagerSetMmapLimit(Pager *pPager, sqlite3_int64 szMmap){
+  pPager->szMmap = szMmap;
+  pagerFixMaplimit(pPager);
+}
+
+/*
+** Free as much memory as possible from the pager.
+*/
+void sqlite3PagerShrink(Pager *pPager){
+  sqlite3PcacheShrink(pPager->pPCache);
+}
+
+/*
+** Adjust settings of the pager to those specified in the pgFlags parameter.
+**
+** The "level" in pgFlags & PAGER_SYNCHRONOUS_MASK sets the robustness
+** of the database to damage due to OS crashes or power failures by
+** changing the number of syncs()s when writing the journals.
+** There are four levels:
+**
+**    OFF       sqlite3OsSync() is never called.  This is the default
+**              for temporary and transient files.
+**
+**    NORMAL    The journal is synced once before writes begin on the
+**              database.  This is normally adequate protection, but
+**              it is theoretically possible, though very unlikely,
+**              that an inopertune power failure could leave the journal
+**              in a state which would cause damage to the database
+**              when it is rolled back.
+**
+**    FULL      The journal is synced twice before writes begin on the
+**              database (with some additional information - the nRec field
+**              of the journal header - being written in between the two
+**              syncs).  If we assume that writing a
+**              single disk sector is atomic, then this mode provides
+**              assurance that the journal will not be corrupted to the
+**              point of causing damage to the database during rollback.
+**
+**    EXTRA     This is like FULL except that is also syncs the directory
+**              that contains the rollback journal after the rollback
+**              journal is unlinked.
+**
+** The above is for a rollback-journal mode.  For WAL mode, OFF continues
+** to mean that no syncs ever occur.  NORMAL means that the WAL is synced
+** prior to the start of checkpoint and that the database file is synced
+** at the conclusion of the checkpoint if the entire content of the WAL
+** was written back into the database.  But no sync operations occur for
+** an ordinary commit in NORMAL mode with WAL.  FULL means that the WAL
+** file is synced following each commit operation, in addition to the
+** syncs associated with NORMAL.  There is no difference between FULL
+** and EXTRA for WAL mode.
+**
+** Do not confuse synchronous=FULL with SQLITE_SYNC_FULL.  The
+** SQLITE_SYNC_FULL macro means to use the MacOSX-style full-fsync
+** using fcntl(F_FULLFSYNC).  SQLITE_SYNC_NORMAL means to do an
+** ordinary fsync() call.  There is no difference between SQLITE_SYNC_FULL
+** and SQLITE_SYNC_NORMAL on platforms other than MacOSX.  But the
+** synchronous=FULL versus synchronous=NORMAL setting determines when
+** the xSync primitive is called and is relevant to all platforms.
+**
+** Numeric values associated with these states are OFF==1, NORMAL=2,
+** and FULL=3.
+*/
+#ifndef SQLITE_OMIT_PAGER_PRAGMAS
+void sqlite3PagerSetFlags(
+  Pager *pPager,        /* The pager to set safety level for */
+  unsigned pgFlags      /* Various flags */
+){
+  unsigned level = pgFlags & PAGER_SYNCHRONOUS_MASK;
+  if( pPager->tempFile ){
+    pPager->noSync = 1;
+    pPager->fullSync = 0;
+    pPager->extraSync = 0;
+  }else{
+    pPager->noSync =  level==PAGER_SYNCHRONOUS_OFF ?1:0;
+    pPager->fullSync = level>=PAGER_SYNCHRONOUS_FULL ?1:0;
+    pPager->extraSync = level==PAGER_SYNCHRONOUS_EXTRA ?1:0;
+  }
+  if( pPager->noSync ){
+    pPager->syncFlags = 0;
+  }else if( pgFlags & PAGER_FULLFSYNC ){
+    pPager->syncFlags = SQLITE_SYNC_FULL;
+  }else{
+    pPager->syncFlags = SQLITE_SYNC_NORMAL;
+  }
+  pPager->walSyncFlags = (pPager->syncFlags<<2);
+  if( pPager->fullSync ){
+    pPager->walSyncFlags |= pPager->syncFlags;
+  }
+  if( (pgFlags & PAGER_CKPT_FULLFSYNC) && !pPager->noSync ){
+    pPager->walSyncFlags |= (SQLITE_SYNC_FULL<<2);
+  }
+  if( pgFlags & PAGER_CACHESPILL ){
+    pPager->doNotSpill &= ~SPILLFLAG_OFF;
+  }else{
+    pPager->doNotSpill |= SPILLFLAG_OFF;
+  }
+}
+#endif
+
+/*
+** The following global variable is incremented whenever the library
+** attempts to open a temporary file.  This information is used for
+** testing and analysis only.  
+*/
+#ifdef SQLITE_TEST
+int sqlite3_opentemp_count = 0;
+#endif
+
+/*
+** Open a temporary file.
+**
+** Write the file descriptor into *pFile. Return SQLITE_OK on success 
+** or some other error code if we fail. The OS will automatically 
+** delete the temporary file when it is closed.
+**
+** The flags passed to the VFS layer xOpen() call are those specified
+** by parameter vfsFlags ORed with the following:
+**
+**     SQLITE_OPEN_READWRITE
+**     SQLITE_OPEN_CREATE
+**     SQLITE_OPEN_EXCLUSIVE
+**     SQLITE_OPEN_DELETEONCLOSE
+*/
+static int pagerOpentemp(
+  Pager *pPager,        /* The pager object */
+  sqlite3_file *pFile,  /* Write the file descriptor here */
+  int vfsFlags          /* Flags passed through to the VFS */
+){
+  int rc;               /* Return code */
+
+#ifdef SQLITE_TEST
+  sqlite3_opentemp_count++;  /* Used for testing and analysis only */
+#endif
+
+  vfsFlags |=  SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE |
+            SQLITE_OPEN_EXCLUSIVE | SQLITE_OPEN_DELETEONCLOSE;
+  rc = sqlite3OsOpen(pPager->pVfs, 0, pFile, vfsFlags, 0);
+  assert( rc!=SQLITE_OK || isOpen(pFile) );
+  return rc;
+}
+
+/*
+** Set the busy handler function.
+**
+** The pager invokes the busy-handler if sqlite3OsLock() returns 
+** SQLITE_BUSY when trying to upgrade from no-lock to a SHARED lock,
+** or when trying to upgrade from a RESERVED lock to an EXCLUSIVE 
+** lock. It does *not* invoke the busy handler when upgrading from
+** SHARED to RESERVED, or when upgrading from SHARED to EXCLUSIVE
+** (which occurs during hot-journal rollback). Summary:
+**
+**   Transition                        | Invokes xBusyHandler
+**   --------------------------------------------------------
+**   NO_LOCK       -> SHARED_LOCK      | Yes
+**   SHARED_LOCK   -> RESERVED_LOCK    | No
+**   SHARED_LOCK   -> EXCLUSIVE_LOCK   | No
+**   RESERVED_LOCK -> EXCLUSIVE_LOCK   | Yes
+**
+** If the busy-handler callback returns non-zero, the lock is 
+** retried. If it returns zero, then the SQLITE_BUSY error is
+** returned to the caller of the pager API function.
+*/
+void sqlite3PagerSetBusyHandler(
+  Pager *pPager,                       /* Pager object */
+  int (*xBusyHandler)(void *),         /* Pointer to busy-handler function */
+  void *pBusyHandlerArg                /* Argument to pass to xBusyHandler */
+){
+  void **ap;
+  pPager->xBusyHandler = xBusyHandler;
+  pPager->pBusyHandlerArg = pBusyHandlerArg;
+  ap = (void **)&pPager->xBusyHandler;
+  assert( ((int(*)(void *))(ap[0]))==xBusyHandler );
+  assert( ap[1]==pBusyHandlerArg );
+  sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap);
+}
+
+/*
+** Change the page size used by the Pager object. The new page size 
+** is passed in *pPageSize.
+**
+** If the pager is in the error state when this function is called, it
+** is a no-op. The value returned is the error state error code (i.e. 
+** one of SQLITE_IOERR, an SQLITE_IOERR_xxx sub-code or SQLITE_FULL).
+**
+** Otherwise, if all of the following are true:
+**
+**   * the new page size (value of *pPageSize) is valid (a power 
+**     of two between 512 and SQLITE_MAX_PAGE_SIZE, inclusive), and
+**
+**   * there are no outstanding page references, and
+**
+**   * the database is either not an in-memory database or it is
+**     an in-memory database that currently consists of zero pages.
+**
+** then the pager object page size is set to *pPageSize.
+**
+** If the page size is changed, then this function uses sqlite3PagerMalloc() 
+** to obtain a new Pager.pTmpSpace buffer. If this allocation attempt 
+** fails, SQLITE_NOMEM is returned and the page size remains unchanged. 
+** In all other cases, SQLITE_OK is returned.
+**
+** If the page size is not changed, either because one of the enumerated
+** conditions above is not true, the pager was in error state when this
+** function was called, or because the memory allocation attempt failed, 
+** then *pPageSize is set to the old, retained page size before returning.
+*/
+int sqlite3PagerSetPagesize(Pager *pPager, u32 *pPageSize, int nReserve){
+  int rc = SQLITE_OK;
+
+  /* It is not possible to do a full assert_pager_state() here, as this
+  ** function may be called from within PagerOpen(), before the state
+  ** of the Pager object is internally consistent.
+  **
+  ** At one point this function returned an error if the pager was in 
+  ** PAGER_ERROR state. But since PAGER_ERROR state guarantees that
+  ** there is at least one outstanding page reference, this function
+  ** is a no-op for that case anyhow.
+  */
+
+  u32 pageSize = *pPageSize;
+  assert( pageSize==0 || (pageSize>=512 && pageSize<=SQLITE_MAX_PAGE_SIZE) );
+  if( (pPager->memDb==0 || pPager->dbSize==0)
+   && sqlite3PcacheRefCount(pPager->pPCache)==0 
+   && pageSize && pageSize!=(u32)pPager->pageSize 
+  ){
+    char *pNew = NULL;             /* New temp space */
+    i64 nByte = 0;
+
+    if( pPager->eState>PAGER_OPEN && isOpen(pPager->fd) ){
+      rc = sqlite3OsFileSize(pPager->fd, &nByte);
+    }
+    if( rc==SQLITE_OK ){
+      /* 8 bytes of zeroed overrun space is sufficient so that the b-tree
+      * cell header parser will never run off the end of the allocation */
+      pNew = (char *)sqlite3PageMalloc(pageSize+8);
+      if( !pNew ){
+        rc = SQLITE_NOMEM_BKPT;
+      }else{
+        memset(pNew+pageSize, 0, 8);
+      }
+    }
+
+    if( rc==SQLITE_OK ){
+      pager_reset(pPager);
+      rc = sqlite3PcacheSetPageSize(pPager->pPCache, pageSize);
+    }
+    if( rc==SQLITE_OK ){
+      sqlite3PageFree(pPager->pTmpSpace);
+      pPager->pTmpSpace = pNew;
+      pPager->dbSize = (Pgno)((nByte+pageSize-1)/pageSize);
+      pPager->pageSize = pageSize;
+      pPager->lckPgno = (Pgno)(PENDING_BYTE/pageSize) + 1;
+    }else{
+      sqlite3PageFree(pNew);
+    }
+  }
+
+  *pPageSize = pPager->pageSize;
+  if( rc==SQLITE_OK ){
+    if( nReserve<0 ) nReserve = pPager->nReserve;
+    assert( nReserve>=0 && nReserve<1000 );
+    pPager->nReserve = (i16)nReserve;
+    pagerFixMaplimit(pPager);
+  }
+  return rc;
+}
+
+/*
+** Return a pointer to the "temporary page" buffer held internally
+** by the pager.  This is a buffer that is big enough to hold the
+** entire content of a database page.  This buffer is used internally
+** during rollback and will be overwritten whenever a rollback
+** occurs.  But other modules are free to use it too, as long as
+** no rollbacks are happening.
+*/
+void *sqlite3PagerTempSpace(Pager *pPager){
+  return pPager->pTmpSpace;
+}
+
+/*
+** Attempt to set the maximum database page count if mxPage is positive. 
+** Make no changes if mxPage is zero or negative.  And never reduce the
+** maximum page count below the current size of the database.
+**
+** Regardless of mxPage, return the current maximum page count.
+*/
+Pgno sqlite3PagerMaxPageCount(Pager *pPager, Pgno mxPage){
+  if( mxPage>0 ){
+    pPager->mxPgno = mxPage;
+  }
+  assert( pPager->eState!=PAGER_OPEN );      /* Called only by OP_MaxPgcnt */
+  /* assert( pPager->mxPgno>=pPager->dbSize ); */
+  /* OP_MaxPgcnt ensures that the parameter passed to this function is not
+  ** less than the total number of valid pages in the database. But this
+  ** may be less than Pager.dbSize, and so the assert() above is not valid */
+  return pPager->mxPgno;
+}
+
+/*
+** The following set of routines are used to disable the simulated
+** I/O error mechanism.  These routines are used to avoid simulated
+** errors in places where we do not care about errors.
+**
+** Unless -DSQLITE_TEST=1 is used, these routines are all no-ops
+** and generate no code.
+*/
+#ifdef SQLITE_TEST
+extern int sqlite3_io_error_pending;
+extern int sqlite3_io_error_hit;
+static int saved_cnt;
+void disable_simulated_io_errors(void){
+  saved_cnt = sqlite3_io_error_pending;
+  sqlite3_io_error_pending = -1;
+}
+void enable_simulated_io_errors(void){
+  sqlite3_io_error_pending = saved_cnt;
+}
+#else
+# define disable_simulated_io_errors()
+# define enable_simulated_io_errors()
+#endif
+
+/*
+** Read the first N bytes from the beginning of the file into memory
+** that pDest points to. 
+**
+** If the pager was opened on a transient file (zFilename==""), or
+** opened on a file less than N bytes in size, the output buffer is
+** zeroed and SQLITE_OK returned. The rationale for this is that this 
+** function is used to read database headers, and a new transient or
+** zero sized database has a header than consists entirely of zeroes.
+**
+** If any IO error apart from SQLITE_IOERR_SHORT_READ is encountered,
+** the error code is returned to the caller and the contents of the
+** output buffer undefined.
+*/
+int sqlite3PagerReadFileheader(Pager *pPager, int N, unsigned char *pDest){
+  int rc = SQLITE_OK;
+  memset(pDest, 0, N);
+  assert( isOpen(pPager->fd) || pPager->tempFile );
+
+  /* This routine is only called by btree immediately after creating
+  ** the Pager object.  There has not been an opportunity to transition
+  ** to WAL mode yet.
+  */
+  assert( !pagerUseWal(pPager) );
+
+  if( isOpen(pPager->fd) ){
+    IOTRACE(("DBHDR %p 0 %d\n", pPager, N))
+    rc = sqlite3OsRead(pPager->fd, pDest, N, 0);
+    if( rc==SQLITE_IOERR_SHORT_READ ){
+      rc = SQLITE_OK;
+    }
+  }
+  return rc;
+}
+
+/*
+** This function may only be called when a read-transaction is open on
+** the pager. It returns the total number of pages in the database.
+**
+** However, if the file is between 1 and <page-size> bytes in size, then 
+** this is considered a 1 page file.
+*/
+void sqlite3PagerPagecount(Pager *pPager, int *pnPage){
+  assert( pPager->eState>=PAGER_READER );
+  assert( pPager->eState!=PAGER_WRITER_FINISHED );
+  *pnPage = (int)pPager->dbSize;
+}
+
+
+/*
+** Try to obtain a lock of type locktype on the database file. If
+** a similar or greater lock is already held, this function is a no-op
+** (returning SQLITE_OK immediately).
+**
+** Otherwise, attempt to obtain the lock using sqlite3OsLock(). Invoke 
+** the busy callback if the lock is currently not available. Repeat 
+** until the busy callback returns false or until the attempt to 
+** obtain the lock succeeds.
+**
+** Return SQLITE_OK on success and an error code if we cannot obtain
+** the lock. If the lock is obtained successfully, set the Pager.state 
+** variable to locktype before returning.
+*/
+static int pager_wait_on_lock(Pager *pPager, int locktype){
+  int rc;                              /* Return code */
+
+  /* Check that this is either a no-op (because the requested lock is 
+  ** already held), or one of the transitions that the busy-handler
+  ** may be invoked during, according to the comment above
+  ** sqlite3PagerSetBusyhandler().
+  */
+  assert( (pPager->eLock>=locktype)
+       || (pPager->eLock==NO_LOCK && locktype==SHARED_LOCK)
+       || (pPager->eLock==RESERVED_LOCK && locktype==EXCLUSIVE_LOCK)
+  );
+
+  do {
+    rc = pagerLockDb(pPager, locktype);
+  }while( rc==SQLITE_BUSY && pPager->xBusyHandler(pPager->pBusyHandlerArg) );
+  return rc;
+}
+
+/*
+** Function assertTruncateConstraint(pPager) checks that one of the 
+** following is true for all dirty pages currently in the page-cache:
+**
+**   a) The page number is less than or equal to the size of the 
+**      current database image, in pages, OR
+**
+**   b) if the page content were written at this time, it would not
+**      be necessary to write the current content out to the sub-journal.
+**
+** If the condition asserted by this function were not true, and the
+** dirty page were to be discarded from the cache via the pagerStress()
+** routine, pagerStress() would not write the current page content to
+** the database file. If a savepoint transaction were rolled back after
+** this happened, the correct behavior would be to restore the current
+** content of the page. However, since this content is not present in either
+** the database file or the portion of the rollback journal and 
+** sub-journal rolled back the content could not be restored and the
+** database image would become corrupt. It is therefore fortunate that 
+** this circumstance cannot arise.
+*/
+#if defined(SQLITE_DEBUG)
+static void assertTruncateConstraintCb(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  assert( pPg->flags&PGHDR_DIRTY );
+  if( pPg->pgno>pPager->dbSize ){      /* if (a) is false */
+    Pgno pgno = pPg->pgno;
+    int i;
+    for(i=0; i<pPg->pPager->nSavepoint; i++){
+      PagerSavepoint *p = &pPager->aSavepoint[i];
+      assert( p->nOrig<pgno || sqlite3BitvecTestNotNull(p->pInSavepoint,pgno) );
+    }
+  }
+}
+static void assertTruncateConstraint(Pager *pPager){
+  sqlite3PcacheIterateDirty(pPager->pPCache, assertTruncateConstraintCb);
+}
+#else
+# define assertTruncateConstraint(pPager)
+#endif
+
+/*
+** Truncate the in-memory database file image to nPage pages. This 
+** function does not actually modify the database file on disk. It 
+** just sets the internal state of the pager object so that the 
+** truncation will be done when the current transaction is committed.
+**
+** This function is only called right before committing a transaction.
+** Once this function has been called, the transaction must either be
+** rolled back or committed. It is not safe to call this function and
+** then continue writing to the database.
+*/
+void sqlite3PagerTruncateImage(Pager *pPager, Pgno nPage){
+  assert( pPager->dbSize>=nPage || CORRUPT_DB );
+  assert( pPager->eState>=PAGER_WRITER_CACHEMOD );
+  pPager->dbSize = nPage;
+
+  /* At one point the code here called assertTruncateConstraint() to
+  ** ensure that all pages being truncated away by this operation are,
+  ** if one or more savepoints are open, present in the savepoint 
+  ** journal so that they can be restored if the savepoint is rolled
+  ** back. This is no longer necessary as this function is now only
+  ** called right before committing a transaction. So although the 
+  ** Pager object may still have open savepoints (Pager.nSavepoint!=0), 
+  ** they cannot be rolled back. So the assertTruncateConstraint() call
+  ** is no longer correct. */
+}
+
+
+/*
+** This function is called before attempting a hot-journal rollback. It
+** syncs the journal file to disk, then sets pPager->journalHdr to the
+** size of the journal file so that the pager_playback() routine knows
+** that the entire journal file has been synced.
+**
+** Syncing a hot-journal to disk before attempting to roll it back ensures 
+** that if a power-failure occurs during the rollback, the process that
+** attempts rollback following system recovery sees the same journal
+** content as this process.
+**
+** If everything goes as planned, SQLITE_OK is returned. Otherwise, 
+** an SQLite error code.
+*/
+static int pagerSyncHotJournal(Pager *pPager){
+  int rc = SQLITE_OK;
+  if( !pPager->noSync ){
+    rc = sqlite3OsSync(pPager->jfd, SQLITE_SYNC_NORMAL);
+  }
+  if( rc==SQLITE_OK ){
+    rc = sqlite3OsFileSize(pPager->jfd, &pPager->journalHdr);
+  }
+  return rc;
+}
+
+#if SQLITE_MAX_MMAP_SIZE>0
+/*
+** Obtain a reference to a memory mapped page object for page number pgno. 
+** The new object will use the pointer pData, obtained from xFetch().
+** If successful, set *ppPage to point to the new page reference
+** and return SQLITE_OK. Otherwise, return an SQLite error code and set
+** *ppPage to zero.
+**
+** Page references obtained by calling this function should be released
+** by calling pagerReleaseMapPage().
+*/
+static int pagerAcquireMapPage(
+  Pager *pPager,                  /* Pager object */
+  Pgno pgno,                      /* Page number */
+  void *pData,                    /* xFetch()'d data for this page */
+  PgHdr **ppPage                  /* OUT: Acquired page object */
+){
+  PgHdr *p;                       /* Memory mapped page to return */
+  
+  if( pPager->pMmapFreelist ){
+    *ppPage = p = pPager->pMmapFreelist;
+    pPager->pMmapFreelist = p->pDirty;
+    p->pDirty = 0;
+    assert( pPager->nExtra>=8 );
+    memset(p->pExtra, 0, 8);
+  }else{
+    *ppPage = p = (PgHdr *)sqlite3MallocZero(sizeof(PgHdr) + pPager->nExtra);
+    if( p==0 ){
+      sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1) * pPager->pageSize, pData);
+      return SQLITE_NOMEM_BKPT;
+    }
+    p->pExtra = (void *)&p[1];
+    p->flags = PGHDR_MMAP;
+    p->nRef = 1;
+    p->pPager = pPager;
+  }
+
+  assert( p->pExtra==(void *)&p[1] );
+  assert( p->pPage==0 );
+  assert( p->flags==PGHDR_MMAP );
+  assert( p->pPager==pPager );
+  assert( p->nRef==1 );
+
+  p->pgno = pgno;
+  p->pData = pData;
+  pPager->nMmapOut++;
+
+  return SQLITE_OK;
+}
+#endif
+
+/*
+** Release a reference to page pPg. pPg must have been returned by an 
+** earlier call to pagerAcquireMapPage().
+*/
+static void pagerReleaseMapPage(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  pPager->nMmapOut--;
+  pPg->pDirty = pPager->pMmapFreelist;
+  pPager->pMmapFreelist = pPg;
+
+  assert( pPager->fd->pMethods->iVersion>=3 );
+  sqlite3OsUnfetch(pPager->fd, (i64)(pPg->pgno-1)*pPager->pageSize, pPg->pData);
+}
+
+/*
+** Free all PgHdr objects stored in the Pager.pMmapFreelist list.
+*/
+static void pagerFreeMapHdrs(Pager *pPager){
+  PgHdr *p;
+  PgHdr *pNext;
+  for(p=pPager->pMmapFreelist; p; p=pNext){
+    pNext = p->pDirty;
+    sqlite3_free(p);
+  }
+}
+
+/* Verify that the database file has not be deleted or renamed out from
+** under the pager.  Return SQLITE_OK if the database is still where it ought
+** to be on disk.  Return non-zero (SQLITE_READONLY_DBMOVED or some other error
+** code from sqlite3OsAccess()) if the database has gone missing.
+*/
+static int databaseIsUnmoved(Pager *pPager){
+  int bHasMoved = 0;
+  int rc;
+
+  if( pPager->tempFile ) return SQLITE_OK;
+  if( pPager->dbSize==0 ) return SQLITE_OK;
+  assert( pPager->zFilename && pPager->zFilename[0] );
+  rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_HAS_MOVED, &bHasMoved);
+  if( rc==SQLITE_NOTFOUND ){
+    /* If the HAS_MOVED file-control is unimplemented, assume that the file
+    ** has not been moved.  That is the historical behavior of SQLite: prior to
+    ** version 3.8.3, it never checked */
+    rc = SQLITE_OK;
+  }else if( rc==SQLITE_OK && bHasMoved ){
+    rc = SQLITE_READONLY_DBMOVED;
+  }
+  return rc;
+}
+
+
+/*
+** Shutdown the page cache.  Free all memory and close all files.
+**
+** If a transaction was in progress when this routine is called, that
+** transaction is rolled back.  All outstanding pages are invalidated
+** and their memory is freed.  Any attempt to use a page associated
+** with this page cache after this function returns will likely
+** result in a coredump.
+**
+** This function always succeeds. If a transaction is active an attempt
+** is made to roll it back. If an error occurs during the rollback 
+** a hot journal may be left in the filesystem but no error is returned
+** to the caller.
+*/
+int sqlite3PagerClose(Pager *pPager, sqlite3 *db){
+  u8 *pTmp = (u8*)pPager->pTmpSpace;
+  assert( db || pagerUseWal(pPager)==0 );
+  assert( assert_pager_state(pPager) );
+  disable_simulated_io_errors();
+  sqlite3BeginBenignMalloc();
+  pagerFreeMapHdrs(pPager);
+  /* pPager->errCode = 0; */
+  pPager->exclusiveMode = 0;
+#ifndef SQLITE_OMIT_WAL
+  {
+    u8 *a = 0;
+    assert( db || pPager->pWal==0 );
+    if( db && 0==(db->flags & SQLITE_NoCkptOnClose) 
+     && SQLITE_OK==databaseIsUnmoved(pPager)
+    ){
+      a = pTmp;
+    }
+    sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags, pPager->pageSize,a);
+    pPager->pWal = 0;
+  }
+#endif
+  pager_reset(pPager);
+  if( MEMDB ){
+    pager_unlock(pPager);
+  }else{
+    /* If it is open, sync the journal file before calling UnlockAndRollback.
+    ** If this is not done, then an unsynced portion of the open journal 
+    ** file may be played back into the database. If a power failure occurs 
+    ** while this is happening, the database could become corrupt.
+    **
+    ** If an error occurs while trying to sync the journal, shift the pager
+    ** into the ERROR state. This causes UnlockAndRollback to unlock the
+    ** database and close the journal file without attempting to roll it
+    ** back or finalize it. The next database user will have to do hot-journal
+    ** rollback before accessing the database file.
+    */
+    if( isOpen(pPager->jfd) ){
+      pager_error(pPager, pagerSyncHotJournal(pPager));
+    }
+    pagerUnlockAndRollback(pPager);
+  }
+  sqlite3EndBenignMalloc();
+  enable_simulated_io_errors();
+  PAGERTRACE(("CLOSE %d\n", PAGERID(pPager)));
+  IOTRACE(("CLOSE %p\n", pPager))
+  sqlite3OsClose(pPager->jfd);
+  sqlite3OsClose(pPager->fd);
+  sqlite3PageFree(pTmp);
+  sqlite3PcacheClose(pPager->pPCache);
+  assert( !pPager->aSavepoint && !pPager->pInJournal );
+  assert( !isOpen(pPager->jfd) && !isOpen(pPager->sjfd) );
+
+  sqlite3_free(pPager);
+  return SQLITE_OK;
+}
+
+#if !defined(NDEBUG) || defined(SQLITE_TEST)
+/*
+** Return the page number for page pPg.
+*/
+Pgno sqlite3PagerPagenumber(DbPage *pPg){
+  return pPg->pgno;
+}
+#endif
+
+/*
+** Increment the reference count for page pPg.
+*/
+void sqlite3PagerRef(DbPage *pPg){
+  sqlite3PcacheRef(pPg);
+}
+
+/*
+** Sync the journal. In other words, make sure all the pages that have
+** been written to the journal have actually reached the surface of the
+** disk and can be restored in the event of a hot-journal rollback.
+**
+** If the Pager.noSync flag is set, then this function is a no-op.
+** Otherwise, the actions required depend on the journal-mode and the 
+** device characteristics of the file-system, as follows:
+**
+**   * If the journal file is an in-memory journal file, no action need
+**     be taken.
+**
+**   * Otherwise, if the device does not support the SAFE_APPEND property,
+**     then the nRec field of the most recently written journal header
+**     is updated to contain the number of journal records that have
+**     been written following it. If the pager is operating in full-sync
+**     mode, then the journal file is synced before this field is updated.
+**
+**   * If the device does not support the SEQUENTIAL property, then 
+**     journal file is synced.
+**
+** Or, in pseudo-code:
+**
+**   if( NOT <in-memory journal> ){
+**     if( NOT SAFE_APPEND ){
+**       if( <full-sync mode> ) xSync(<journal file>);
+**       <update nRec field>
+**     } 
+**     if( NOT SEQUENTIAL ) xSync(<journal file>);
+**   }
+**
+** If successful, this routine clears the PGHDR_NEED_SYNC flag of every 
+** page currently held in memory before returning SQLITE_OK. If an IO
+** error is encountered, then the IO error code is returned to the caller.
+*/
+static int syncJournal(Pager *pPager, int newHdr){
+  int rc;                         /* Return code */
+
+  assert( pPager->eState==PAGER_WRITER_CACHEMOD
+       || pPager->eState==PAGER_WRITER_DBMOD
+  );
+  assert( assert_pager_state(pPager) );
+  assert( !pagerUseWal(pPager) );
+
+  rc = sqlite3PagerExclusiveLock(pPager);
+  if( rc!=SQLITE_OK ) return rc;
+
+  if( !pPager->noSync ){
+    assert( !pPager->tempFile );
+    if( isOpen(pPager->jfd) && pPager->journalMode!=PAGER_JOURNALMODE_MEMORY ){
+      const int iDc = sqlite3OsDeviceCharacteristics(pPager->fd);
+      assert( isOpen(pPager->jfd) );
+
+      if( 0==(iDc&SQLITE_IOCAP_SAFE_APPEND) ){
+        /* This block deals with an obscure problem. If the last connection
+        ** that wrote to this database was operating in persistent-journal
+        ** mode, then the journal file may at this point actually be larger
+        ** than Pager.journalOff bytes. If the next thing in the journal
+        ** file happens to be a journal-header (written as part of the
+        ** previous connection's transaction), and a crash or power-failure 
+        ** occurs after nRec is updated but before this connection writes 
+        ** anything else to the journal file (or commits/rolls back its 
+        ** transaction), then SQLite may become confused when doing the 
+        ** hot-journal rollback following recovery. It may roll back all
+        ** of this connections data, then proceed to rolling back the old,
+        ** out-of-date data that follows it. Database corruption.
+        **
+        ** To work around this, if the journal file does appear to contain
+        ** a valid header following Pager.journalOff, then write a 0x00
+        ** byte to the start of it to prevent it from being recognized.
+        **
+        ** Variable iNextHdrOffset is set to the offset at which this
+        ** problematic header will occur, if it exists. aMagic is used 
+        ** as a temporary buffer to inspect the first couple of bytes of
+        ** the potential journal header.
+        */
+        i64 iNextHdrOffset;
+        u8 aMagic[8];
+        u8 zHeader[sizeof(aJournalMagic)+4];
+
+        memcpy(zHeader, aJournalMagic, sizeof(aJournalMagic));
+        put32bits(&zHeader[sizeof(aJournalMagic)], pPager->nRec);
+
+        iNextHdrOffset = journalHdrOffset(pPager);
+        rc = sqlite3OsRead(pPager->jfd, aMagic, 8, iNextHdrOffset);
+        if( rc==SQLITE_OK && 0==memcmp(aMagic, aJournalMagic, 8) ){
+          static const u8 zerobyte = 0;
+          rc = sqlite3OsWrite(pPager->jfd, &zerobyte, 1, iNextHdrOffset);
+        }
+        if( rc!=SQLITE_OK && rc!=SQLITE_IOERR_SHORT_READ ){
+          return rc;
+        }
+
+        /* Write the nRec value into the journal file header. If in
+        ** full-synchronous mode, sync the journal first. This ensures that
+        ** all data has really hit the disk before nRec is updated to mark
+        ** it as a candidate for rollback.
+        **
+        ** This is not required if the persistent media supports the
+        ** SAFE_APPEND property. Because in this case it is not possible 
+        ** for garbage data to be appended to the file, the nRec field
+        ** is populated with 0xFFFFFFFF when the journal header is written
+        ** and never needs to be updated.
+        */
+        if( pPager->fullSync && 0==(iDc&SQLITE_IOCAP_SEQUENTIAL) ){
+          PAGERTRACE(("SYNC journal of %d\n", PAGERID(pPager)));
+          IOTRACE(("JSYNC %p\n", pPager))
+          rc = sqlite3OsSync(pPager->jfd, pPager->syncFlags);
+          if( rc!=SQLITE_OK ) return rc;
+        }
+        IOTRACE(("JHDR %p %lld\n", pPager, pPager->journalHdr));
+        rc = sqlite3OsWrite(
+            pPager->jfd, zHeader, sizeof(zHeader), pPager->journalHdr
+        );
+        if( rc!=SQLITE_OK ) return rc;
+      }
+      if( 0==(iDc&SQLITE_IOCAP_SEQUENTIAL) ){
+        PAGERTRACE(("SYNC journal of %d\n", PAGERID(pPager)));
+        IOTRACE(("JSYNC %p\n", pPager))
+        rc = sqlite3OsSync(pPager->jfd, pPager->syncFlags| 
+          (pPager->syncFlags==SQLITE_SYNC_FULL?SQLITE_SYNC_DATAONLY:0)
+        );
+        if( rc!=SQLITE_OK ) return rc;
+      }
+
+      pPager->journalHdr = pPager->journalOff;
+      if( newHdr && 0==(iDc&SQLITE_IOCAP_SAFE_APPEND) ){
+        pPager->nRec = 0;
+        rc = writeJournalHdr(pPager);
+        if( rc!=SQLITE_OK ) return rc;
+      }
+    }else{
+      pPager->journalHdr = pPager->journalOff;
+    }
+  }
+
+  /* Unless the pager is in noSync mode, the journal file was just 
+  ** successfully synced. Either way, clear the PGHDR_NEED_SYNC flag on 
+  ** all pages.
+  */
+  sqlite3PcacheClearSyncFlags(pPager->pPCache);
+  pPager->eState = PAGER_WRITER_DBMOD;
+  assert( assert_pager_state(pPager) );
+  return SQLITE_OK;
+}
+
+/*
+** The argument is the first in a linked list of dirty pages connected
+** by the PgHdr.pDirty pointer. This function writes each one of the
+** in-memory pages in the list to the database file. The argument may
+** be NULL, representing an empty list. In this case this function is
+** a no-op.
+**
+** The pager must hold at least a RESERVED lock when this function
+** is called. Before writing anything to the database file, this lock
+** is upgraded to an EXCLUSIVE lock. If the lock cannot be obtained,
+** SQLITE_BUSY is returned and no data is written to the database file.
+** 
+** If the pager is a temp-file pager and the actual file-system file
+** is not yet open, it is created and opened before any data is 
+** written out.
+**
+** Once the lock has been upgraded and, if necessary, the file opened,
+** the pages are written out to the database file in list order. Writing
+** a page is skipped if it meets either of the following criteria:
+**
+**   * The page number is greater than Pager.dbSize, or
+**   * The PGHDR_DONT_WRITE flag is set on the page.
+**
+** If writing out a page causes the database file to grow, Pager.dbFileSize
+** is updated accordingly. If page 1 is written out, then the value cached
+** in Pager.dbFileVers[] is updated to match the new value stored in
+** the database file.
+**
+** If everything is successful, SQLITE_OK is returned. If an IO error 
+** occurs, an IO error code is returned. Or, if the EXCLUSIVE lock cannot
+** be obtained, SQLITE_BUSY is returned.
+*/
+static int pager_write_pagelist(Pager *pPager, PgHdr *pList){
+  int rc = SQLITE_OK;                  /* Return code */
+
+  /* This function is only called for rollback pagers in WRITER_DBMOD state. */
+  assert( !pagerUseWal(pPager) );
+  assert( pPager->tempFile || pPager->eState==PAGER_WRITER_DBMOD );
+  assert( pPager->eLock==EXCLUSIVE_LOCK );
+  assert( isOpen(pPager->fd) || pList->pDirty==0 );
+
+  /* If the file is a temp-file has not yet been opened, open it now. It
+  ** is not possible for rc to be other than SQLITE_OK if this branch
+  ** is taken, as pager_wait_on_lock() is a no-op for temp-files.
+  */
+  if( !isOpen(pPager->fd) ){
+    assert( pPager->tempFile && rc==SQLITE_OK );
+    rc = pagerOpentemp(pPager, pPager->fd, pPager->vfsFlags);
+  }
+
+  /* Before the first write, give the VFS a hint of what the final
+  ** file size will be.
+  */
+  assert( rc!=SQLITE_OK || isOpen(pPager->fd) );
+  if( rc==SQLITE_OK 
+   && pPager->dbHintSize<pPager->dbSize
+   && (pList->pDirty || pList->pgno>pPager->dbHintSize)
+  ){
+    sqlite3_int64 szFile = pPager->pageSize * (sqlite3_int64)pPager->dbSize;
+    sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_SIZE_HINT, &szFile);
+    pPager->dbHintSize = pPager->dbSize;
+  }
+
+  while( rc==SQLITE_OK && pList ){
+    Pgno pgno = pList->pgno;
+
+    /* If there are dirty pages in the page cache with page numbers greater
+    ** than Pager.dbSize, this means sqlite3PagerTruncateImage() was called to
+    ** make the file smaller (presumably by auto-vacuum code). Do not write
+    ** any such pages to the file.
+    **
+    ** Also, do not write out any page that has the PGHDR_DONT_WRITE flag
+    ** set (set by sqlite3PagerDontWrite()).
+    */
+    if( pgno<=pPager->dbSize && 0==(pList->flags&PGHDR_DONT_WRITE) ){
+      i64 offset = (pgno-1)*(i64)pPager->pageSize;   /* Offset to write */
+      char *pData;                                   /* Data to write */    
+
+      assert( (pList->flags&PGHDR_NEED_SYNC)==0 );
+      if( pList->pgno==1 ) pager_write_changecounter(pList);
+
+      pData = pList->pData;
+
+      /* Write out the page data. */
+      rc = sqlite3OsWrite(pPager->fd, pData, pPager->pageSize, offset);
+
+      /* If page 1 was just written, update Pager.dbFileVers to match
+      ** the value now stored in the database file. If writing this 
+      ** page caused the database file to grow, update dbFileSize. 
+      */
+      if( pgno==1 ){
+        memcpy(&pPager->dbFileVers, &pData[24], sizeof(pPager->dbFileVers));
+      }
+      if( pgno>pPager->dbFileSize ){
+        pPager->dbFileSize = pgno;
+      }
+      pPager->aStat[PAGER_STAT_WRITE]++;
+
+      /* Update any backup objects copying the contents of this pager. */
+      sqlite3BackupUpdate(pPager->pBackup, pgno, (u8*)pList->pData);
+
+      PAGERTRACE(("STORE %d page %d hash(%08x)\n",
+                   PAGERID(pPager), pgno, pager_pagehash(pList)));
+      IOTRACE(("PGOUT %p %d\n", pPager, pgno));
+      PAGER_INCR(sqlite3_pager_writedb_count);
+    }else{
+      PAGERTRACE(("NOSTORE %d page %d\n", PAGERID(pPager), pgno));
+    }
+    pager_set_pagehash(pList);
+    pList = pList->pDirty;
+  }
+
+  return rc;
+}
+
+/*
+** Ensure that the sub-journal file is open. If it is already open, this 
+** function is a no-op.
+**
+** SQLITE_OK is returned if everything goes according to plan. An 
+** SQLITE_IOERR_XXX error code is returned if a call to sqlite3OsOpen() 
+** fails.
+*/
+static int openSubJournal(Pager *pPager){
+  int rc = SQLITE_OK;
+  if( !isOpen(pPager->sjfd) ){
+    const int flags =  SQLITE_OPEN_SUBJOURNAL | SQLITE_OPEN_READWRITE 
+      | SQLITE_OPEN_CREATE | SQLITE_OPEN_EXCLUSIVE 
+      | SQLITE_OPEN_DELETEONCLOSE;
+    int nStmtSpill = sqlite3Config.nStmtSpill;
+    if( pPager->journalMode==PAGER_JOURNALMODE_MEMORY || pPager->subjInMemory ){
+      nStmtSpill = -1;
+    }
+    rc = sqlite3JournalOpen(pPager->pVfs, 0, pPager->sjfd, flags, nStmtSpill);
+  }
+  return rc;
+}
+
+/*
+** Append a record of the current state of page pPg to the sub-journal. 
+**
+** If successful, set the bit corresponding to pPg->pgno in the bitvecs
+** for all open savepoints before returning.
+**
+** This function returns SQLITE_OK if everything is successful, an IO
+** error code if the attempt to write to the sub-journal fails, or 
+** SQLITE_NOMEM if a malloc fails while setting a bit in a savepoint
+** bitvec.
+*/
+static int subjournalPage(PgHdr *pPg){
+  int rc = SQLITE_OK;
+  Pager *pPager = pPg->pPager;
+  if( pPager->journalMode!=PAGER_JOURNALMODE_OFF ){
+
+    /* Open the sub-journal, if it has not already been opened */
+    assert( pPager->useJournal );
+    assert( isOpen(pPager->jfd) || pagerUseWal(pPager) );
+    assert( isOpen(pPager->sjfd) || pPager->nSubRec==0 );
+    assert( pagerUseWal(pPager) 
+         || pageInJournal(pPager, pPg) 
+         || pPg->pgno>pPager->dbOrigSize 
+    );
+    rc = openSubJournal(pPager);
+
+    /* If the sub-journal was opened successfully (or was already open),
+    ** write the journal record into the file.  */
+    if( rc==SQLITE_OK ){
+      void *pData = pPg->pData;
+      i64 offset = (i64)pPager->nSubRec*(4+pPager->pageSize);
+      char *pData2;
+      pData2 = pData;
+      PAGERTRACE(("STMT-JOURNAL %d page %d\n", PAGERID(pPager), pPg->pgno));
+      rc = write32bits(pPager->sjfd, offset, pPg->pgno);
+      if( rc==SQLITE_OK ){
+        rc = sqlite3OsWrite(pPager->sjfd, pData2, pPager->pageSize, offset+4);
+      }
+    }
+  }
+  if( rc==SQLITE_OK ){
+    pPager->nSubRec++;
+    assert( pPager->nSavepoint>0 );
+    rc = addToSavepointBitvecs(pPager, pPg->pgno);
+  }
+  return rc;
+}
+static int subjournalPageIfRequired(PgHdr *pPg){
+  if( subjRequiresPage(pPg) ){
+    return subjournalPage(pPg);
+  }else{
+    return SQLITE_OK;
+  }
+}
+
+/*
+** This function is called by the pcache layer when it has reached some
+** soft memory limit. The first argument is a pointer to a Pager object
+** (cast as a void*). The pager is always 'purgeable' (not an in-memory
+** database). The second argument is a reference to a page that is 
+** currently dirty but has no outstanding references. The page
+** is always associated with the Pager object passed as the first 
+** argument.
+**
+** The job of this function is to make pPg clean by writing its contents
+** out to the database file, if possible. This may involve syncing the
+** journal file. 
+**
+** If successful, sqlite3PcacheMakeClean() is called on the page and
+** SQLITE_OK returned. If an IO error occurs while trying to make the
+** page clean, the IO error code is returned. If the page cannot be
+** made clean for some other reason, but no error occurs, then SQLITE_OK
+** is returned by sqlite3PcacheMakeClean() is not called.
+*/
+static int pagerStress(void *p, PgHdr *pPg){
+  Pager *pPager = (Pager *)p;
+  int rc = SQLITE_OK;
+
+  assert( pPg->pPager==pPager );
+  assert( pPg->flags&PGHDR_DIRTY );
+
+  /* The doNotSpill NOSYNC bit is set during times when doing a sync of
+  ** journal (and adding a new header) is not allowed.  This occurs
+  ** during calls to sqlite3PagerWrite() while trying to journal multiple
+  ** pages belonging to the same sector.
+  **
+  ** The doNotSpill ROLLBACK and OFF bits inhibits all cache spilling
+  ** regardless of whether or not a sync is required.  This is set during
+  ** a rollback or by user request, respectively.
+  **
+  ** Spilling is also prohibited when in an error state since that could
+  ** lead to database corruption.   In the current implementation it 
+  ** is impossible for sqlite3PcacheFetch() to be called with createFlag==3
+  ** while in the error state, hence it is impossible for this routine to
+  ** be called in the error state.  Nevertheless, we include a NEVER()
+  ** test for the error state as a safeguard against future changes.
+  */
+  if( NEVER(pPager->errCode) ) return SQLITE_OK;
+  testcase( pPager->doNotSpill & SPILLFLAG_ROLLBACK );
+  testcase( pPager->doNotSpill & SPILLFLAG_OFF );
+  testcase( pPager->doNotSpill & SPILLFLAG_NOSYNC );
+  if( pPager->doNotSpill
+   && ((pPager->doNotSpill & (SPILLFLAG_ROLLBACK|SPILLFLAG_OFF))!=0
+      || (pPg->flags & PGHDR_NEED_SYNC)!=0)
+  ){
+    return SQLITE_OK;
+  }
+
+  pPager->aStat[PAGER_STAT_SPILL]++;
+  pPg->pDirty = 0;
+  if( pagerUseWal(pPager) ){
+    /* Write a single frame for this page to the log. */
+    rc = subjournalPageIfRequired(pPg); 
+    if( rc==SQLITE_OK ){
+      rc = pagerWalFrames(pPager, pPg, 0, 0);
+    }
+  }else{
+    
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+    if( pPager->tempFile==0 ){
+      rc = sqlite3JournalCreate(pPager->jfd);
+      if( rc!=SQLITE_OK ) return pager_error(pPager, rc);
+    }
+#endif
+  
+    /* Sync the journal file if required. */
+    if( pPg->flags&PGHDR_NEED_SYNC 
+     || pPager->eState==PAGER_WRITER_CACHEMOD
+    ){
+      rc = syncJournal(pPager, 1);
+    }
+  
+    /* Write the contents of the page out to the database file. */
+    if( rc==SQLITE_OK ){
+      assert( (pPg->flags&PGHDR_NEED_SYNC)==0 );
+      rc = pager_write_pagelist(pPager, pPg);
+    }
+  }
+
+  /* Mark the page as clean. */
+  if( rc==SQLITE_OK ){
+    PAGERTRACE(("STRESS %d page %d\n", PAGERID(pPager), pPg->pgno));
+    sqlite3PcacheMakeClean(pPg);
+  }
+
+  return pager_error(pPager, rc); 
+}
+
+/*
+** Flush all unreferenced dirty pages to disk.
+*/
+int sqlite3PagerFlush(Pager *pPager){
+  int rc = pPager->errCode;
+  if( !MEMDB ){
+    PgHdr *pList = sqlite3PcacheDirtyList(pPager->pPCache);
+    assert( assert_pager_state(pPager) );
+    while( rc==SQLITE_OK && pList ){
+      PgHdr *pNext = pList->pDirty;
+      if( pList->nRef==0 ){
+        rc = pagerStress((void*)pPager, pList);
+      }
+      pList = pNext;
+    }
+  }
+
+  return rc;
+}
+
+/*
+** Allocate and initialize a new Pager object and put a pointer to it
+** in *ppPager. The pager should eventually be freed by passing it
+** to sqlite3PagerClose().
+**
+** The zFilename argument is the path to the database file to open.
+** If zFilename is NULL then a randomly-named temporary file is created
+** and used as the file to be cached. Temporary files are be deleted
+** automatically when they are closed. If zFilename is ":memory:" then 
+** all information is held in cache. It is never written to disk. 
+** This can be used to implement an in-memory database.
+**
+** The nExtra parameter specifies the number of bytes of space allocated
+** along with each page reference. This space is available to the user
+** via the sqlite3PagerGetExtra() API.  When a new page is allocated, the
+** first 8 bytes of this space are zeroed but the remainder is uninitialized.
+** (The extra space is used by btree as the MemPage object.)
+**
+** The flags argument is used to specify properties that affect the
+** operation of the pager. It should be passed some bitwise combination
+** of the PAGER_* flags.
+**
+** The vfsFlags parameter is a bitmask to pass to the flags parameter
+** of the xOpen() method of the supplied VFS when opening files. 
+**
+** If the pager object is allocated and the specified file opened 
+** successfully, SQLITE_OK is returned and *ppPager set to point to
+** the new pager object. If an error occurs, *ppPager is set to NULL
+** and error code returned. This function may return SQLITE_NOMEM
+** (sqlite3Malloc() is used to allocate memory), SQLITE_CANTOPEN or 
+** various SQLITE_IO_XXX errors.
+*/
+int sqlite3PagerOpen(
+  sqlite3_vfs *pVfs,       /* The virtual file system to use */
+  Pager **ppPager,         /* OUT: Return the Pager structure here */
+  const char *zFilename,   /* Name of the database file to open */
+  int nExtra,              /* Extra bytes append to each in-memory page */
+  int flags,               /* flags controlling this file */
+  int vfsFlags,            /* flags passed through to sqlite3_vfs.xOpen() */
+  void (*xReinit)(DbPage*) /* Function to reinitialize pages */
+){
+  u8 *pPtr;
+  Pager *pPager = 0;       /* Pager object to allocate and return */
+  int rc = SQLITE_OK;      /* Return code */
+  int tempFile = 0;        /* True for temp files (incl. in-memory files) */
+  int memDb = 0;           /* True if this is an in-memory file */
+#ifndef SQLITE_OMIT_DESERIALIZE
+  int memJM = 0;           /* Memory journal mode */
+#else
+# define memJM 0
+#endif
+  int readOnly = 0;        /* True if this is a read-only file */
+  int journalFileSize;     /* Bytes to allocate for each journal fd */
+  char *zPathname = 0;     /* Full path to database file */
+  int nPathname = 0;       /* Number of bytes in zPathname */
+  int useJournal = (flags & PAGER_OMIT_JOURNAL)==0; /* False to omit journal */
+  int pcacheSize = sqlite3PcacheSize();       /* Bytes to allocate for PCache */
+  u32 szPageDflt = SQLITE_DEFAULT_PAGE_SIZE;  /* Default page size */
+  const char *zUri = 0;    /* URI args to copy */
+  int nUriByte = 1;        /* Number of bytes of URI args at *zUri */
+  int nUri = 0;            /* Number of URI parameters */
+
+  /* Figure out how much space is required for each journal file-handle
+  ** (there are two of them, the main journal and the sub-journal).  */
+  journalFileSize = ROUND8(sqlite3JournalSize(pVfs));
+
+  /* Set the output variable to NULL in case an error occurs. */
+  *ppPager = 0;
+
+#ifndef SQLITE_OMIT_MEMORYDB
+  if( flags & PAGER_MEMORY ){
+    memDb = 1;
+    if( zFilename && zFilename[0] ){
+      zPathname = sqlite3DbStrDup(0, zFilename);
+      if( zPathname==0  ) return SQLITE_NOMEM_BKPT;
+      nPathname = sqlite3Strlen30(zPathname);
+      zFilename = 0;
+    }
+  }
+#endif
+
+  /* Compute and store the full pathname in an allocated buffer pointed
+  ** to by zPathname, length nPathname. Or, if this is a temporary file,
+  ** leave both nPathname and zPathname set to 0.
+  */
+  if( zFilename && zFilename[0] ){
+    const char *z;
+    nPathname = pVfs->mxPathname+1;
+    zPathname = sqlite3DbMallocRaw(0, nPathname*2);
+    if( zPathname==0 ){
+      return SQLITE_NOMEM_BKPT;
+    }
+    zPathname[0] = 0; /* Make sure initialized even if FullPathname() fails */
+    rc = sqlite3OsFullPathname(pVfs, zFilename, nPathname, zPathname);
+    if( rc!=SQLITE_OK ){
+      if( rc==SQLITE_OK_SYMLINK ){
+        if( vfsFlags & SQLITE_OPEN_NOFOLLOW ){
+          rc = SQLITE_CANTOPEN_SYMLINK;
+        }else{
+          rc = SQLITE_OK;
+        }
+      }
+    }
+    nPathname = sqlite3Strlen30(zPathname);
+    z = zUri = &zFilename[sqlite3Strlen30(zFilename)+1];
+    while( *z ){
+      z += strlen(z)+1;
+      z += strlen(z)+1;
+      nUri++;
+    }
+    nUriByte = (int)(&z[1] - zUri);
+    assert( nUriByte>=1 );
+    if( rc==SQLITE_OK && nPathname+8>pVfs->mxPathname ){
+      /* This branch is taken when the journal path required by
+      ** the database being opened will be more than pVfs->mxPathname
+      ** bytes in length. This means the database cannot be opened,
+      ** as it will not be possible to open the journal file or even
+      ** check for a hot-journal before reading.
+      */
+      rc = SQLITE_CANTOPEN_BKPT;
+    }
+    if( rc!=SQLITE_OK ){
+      sqlite3DbFree(0, zPathname);
+      return rc;
+    }
+  }
+
+  /* Allocate memory for the Pager structure, PCache object, the
+  ** three file descriptors, the database file name and the journal 
+  ** file name. The layout in memory is as follows:
+  **
+  **     Pager object                    (sizeof(Pager) bytes)
+  **     PCache object                   (sqlite3PcacheSize() bytes)
+  **     Database file handle            (pVfs->szOsFile bytes)
+  **     Sub-journal file handle         (journalFileSize bytes)
+  **     Main journal file handle        (journalFileSize bytes)
+  **     Ptr back to the Pager           (sizeof(Pager*) bytes)
+  **     \0\0\0\0 database prefix        (4 bytes)
+  **     Database file name              (nPathname+1 bytes)
+  **     URI query parameters            (nUriByte bytes)
+  **     Journal filename                (nPathname+8+1 bytes)
+  **     WAL filename                    (nPathname+4+1 bytes)
+  **     \0\0\0 terminator               (3 bytes)
+  **
+  ** Some 3rd-party software, over which we have no control, depends on
+  ** the specific order of the filenames and the \0 separators between them
+  ** so that it can (for example) find the database filename given the WAL
+  ** filename without using the sqlite3_filename_database() API.  This is a
+  ** misuse of SQLite and a bug in the 3rd-party software, but the 3rd-party
+  ** software is in widespread use, so we try to avoid changing the filename
+  ** order and formatting if possible.  In particular, the details of the
+  ** filename format expected by 3rd-party software should be as follows:
+  **
+  **   - Main Database Path
+  **   - \0
+  **   - Multiple URI components consisting of:
+  **     - Key
+  **     - \0
+  **     - Value
+  **     - \0
+  **   - \0
+  **   - Journal Path
+  **   - \0
+  **   - WAL Path (zWALName)
+  **   - \0
+  **
+  ** The sqlite3_create_filename() interface and the databaseFilename() utility
+  ** that is used by sqlite3_filename_database() and kin also depend on the
+  ** specific formatting and order of the various filenames, so if the format
+  ** changes here, be sure to change it there as well.
+  */
+  pPtr = (u8 *)sqlite3MallocZero(
+    ROUND8(sizeof(*pPager)) +            /* Pager structure */
+    ROUND8(pcacheSize) +                 /* PCache object */
+    ROUND8(pVfs->szOsFile) +             /* The main db file */
+    journalFileSize * 2 +                /* The two journal files */
+    sizeof(pPager) +                     /* Space to hold a pointer */
+    4 +                                  /* Database prefix */
+    nPathname + 1 +                      /* database filename */
+    nUriByte +                           /* query parameters */
+    nPathname + 8 + 1 +                  /* Journal filename */
+#ifndef SQLITE_OMIT_WAL
+    nPathname + 4 + 1 +                  /* WAL filename */
+#endif
+    3                                    /* Terminator */
+  );
+  assert( EIGHT_BYTE_ALIGNMENT(SQLITE_INT_TO_PTR(journalFileSize)) );
+  if( !pPtr ){
+    sqlite3DbFree(0, zPathname);
+    return SQLITE_NOMEM_BKPT;
+  }
+  pPager = (Pager*)pPtr;                  pPtr += ROUND8(sizeof(*pPager));
+  pPager->pPCache = (PCache*)pPtr;        pPtr += ROUND8(pcacheSize);
+  pPager->fd = (sqlite3_file*)pPtr;       pPtr += ROUND8(pVfs->szOsFile);
+  pPager->sjfd = (sqlite3_file*)pPtr;     pPtr += journalFileSize;
+  pPager->jfd =  (sqlite3_file*)pPtr;     pPtr += journalFileSize;
+  assert( EIGHT_BYTE_ALIGNMENT(pPager->jfd) );
+  memcpy(pPtr, &pPager, sizeof(pPager));  pPtr += sizeof(pPager);
+
+  /* Fill in the Pager.zFilename and pPager.zQueryParam fields */
+                                          pPtr += 4;  /* Skip zero prefix */
+  pPager->zFilename = (char*)pPtr;
+  if( nPathname>0 ){
+    memcpy(pPtr, zPathname, nPathname);   pPtr += nPathname + 1;
+    if( zUri ){
+      memcpy(pPtr, zUri, nUriByte);       pPtr += nUriByte;
+    }else{
+                                          pPtr++;
+    }
+  }
+
+
+  /* Fill in Pager.zJournal */
+  if( nPathname>0 ){
+    pPager->zJournal = (char*)pPtr;
+    memcpy(pPtr, zPathname, nPathname);   pPtr += nPathname;
+    memcpy(pPtr, "-journal",8);           pPtr += 8 + 1;
+#ifdef SQLITE_ENABLE_8_3_NAMES
+    sqlite3FileSuffix3(zFilename,pPager->zJournal);
+    pPtr = (u8*)(pPager->zJournal + sqlite3Strlen30(pPager->zJournal)+1);
+#endif
+  }else{
+    pPager->zJournal = 0;
+  }
+
+#ifndef SQLITE_OMIT_WAL
+  /* Fill in Pager.zWal */
+  if( nPathname>0 ){
+    pPager->zWal = (char*)pPtr;
+    memcpy(pPtr, zPathname, nPathname);   pPtr += nPathname;
+    memcpy(pPtr, "-wal", 4);              pPtr += 4 + 1;
+#ifdef SQLITE_ENABLE_8_3_NAMES
+    sqlite3FileSuffix3(zFilename, pPager->zWal);
+    pPtr = (u8*)(pPager->zWal + sqlite3Strlen30(pPager->zWal)+1);
+#endif
+  }else{
+    pPager->zWal = 0;
+  }
+#endif
+  (void)pPtr;  /* Suppress warning about unused pPtr value */
+
+  if( nPathname ) sqlite3DbFree(0, zPathname);
+  pPager->pVfs = pVfs;
+  pPager->vfsFlags = vfsFlags;
+
+  /* Open the pager file.
+  */
+  if( zFilename && zFilename[0] ){
+    int fout = 0;                    /* VFS flags returned by xOpen() */
+    rc = sqlite3OsOpen(pVfs, pPager->zFilename, pPager->fd, vfsFlags, &fout);
+    assert( !memDb );
+#ifndef SQLITE_OMIT_DESERIALIZE
+    pPager->memVfs = memJM = (fout&SQLITE_OPEN_MEMORY)!=0;
+#endif
+    readOnly = (fout&SQLITE_OPEN_READONLY)!=0;
+
+    /* If the file was successfully opened for read/write access,
+    ** choose a default page size in case we have to create the
+    ** database file. The default page size is the maximum of:
+    **
+    **    + SQLITE_DEFAULT_PAGE_SIZE,
+    **    + The value returned by sqlite3OsSectorSize()
+    **    + The largest page size that can be written atomically.
+    */
+    if( rc==SQLITE_OK ){
+      int iDc = sqlite3OsDeviceCharacteristics(pPager->fd);
+      if( !readOnly ){
+        setSectorSize(pPager);
+        assert(SQLITE_DEFAULT_PAGE_SIZE<=SQLITE_MAX_DEFAULT_PAGE_SIZE);
+        if( szPageDflt<pPager->sectorSize ){
+          if( pPager->sectorSize>SQLITE_MAX_DEFAULT_PAGE_SIZE ){
+            szPageDflt = SQLITE_MAX_DEFAULT_PAGE_SIZE;
+          }else{
+            szPageDflt = (u32)pPager->sectorSize;
+          }
+        }
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+        {
+          int ii;
+          assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
+          assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
+          assert(SQLITE_MAX_DEFAULT_PAGE_SIZE<=65536);
+          for(ii=szPageDflt; ii<=SQLITE_MAX_DEFAULT_PAGE_SIZE; ii=ii*2){
+            if( iDc&(SQLITE_IOCAP_ATOMIC|(ii>>8)) ){
+              szPageDflt = ii;
+            }
+          }
+        }
+#endif
+      }
+      pPager->noLock = sqlite3_uri_boolean(pPager->zFilename, "nolock", 0);
+      if( (iDc & SQLITE_IOCAP_IMMUTABLE)!=0
+       || sqlite3_uri_boolean(pPager->zFilename, "immutable", 0) ){
+          vfsFlags |= SQLITE_OPEN_READONLY;
+          goto act_like_temp_file;
+      }
+    }
+  }else{
+    /* If a temporary file is requested, it is not opened immediately.
+    ** In this case we accept the default page size and delay actually
+    ** opening the file until the first call to OsWrite().
+    **
+    ** This branch is also run for an in-memory database. An in-memory
+    ** database is the same as a temp-file that is never written out to
+    ** disk and uses an in-memory rollback journal.
+    **
+    ** This branch also runs for files marked as immutable.
+    */ 
+act_like_temp_file:
+    tempFile = 1;
+    pPager->eState = PAGER_READER;     /* Pretend we already have a lock */
+    pPager->eLock = EXCLUSIVE_LOCK;    /* Pretend we are in EXCLUSIVE mode */
+    pPager->noLock = 1;                /* Do no locking */
+    readOnly = (vfsFlags&SQLITE_OPEN_READONLY);
+  }
+
+  /* The following call to PagerSetPagesize() serves to set the value of 
+  ** Pager.pageSize and to allocate the Pager.pTmpSpace buffer.
+  */
+  if( rc==SQLITE_OK ){
+    assert( pPager->memDb==0 );
+    rc = sqlite3PagerSetPagesize(pPager, &szPageDflt, -1);
+    testcase( rc!=SQLITE_OK );
+  }
+
+  /* Initialize the PCache object. */
+  if( rc==SQLITE_OK ){
+    nExtra = ROUND8(nExtra);
+    assert( nExtra>=8 && nExtra<1000 );
+    rc = sqlite3PcacheOpen(szPageDflt, nExtra, !memDb,
+                       !memDb?pagerStress:0, (void *)pPager, pPager->pPCache);
+  }
+
+  /* If an error occurred above, free the  Pager structure and close the file.
+  */
+  if( rc!=SQLITE_OK ){
+    sqlite3OsClose(pPager->fd);
+    sqlite3PageFree(pPager->pTmpSpace);
+    sqlite3_free(pPager);
+    return rc;
+  }
+
+  PAGERTRACE(("OPEN %d %s\n", FILEHANDLEID(pPager->fd), pPager->zFilename));
+  IOTRACE(("OPEN %p %s\n", pPager, pPager->zFilename))
+
+  pPager->useJournal = (u8)useJournal;
+  /* pPager->stmtOpen = 0; */
+  /* pPager->stmtInUse = 0; */
+  /* pPager->nRef = 0; */
+  /* pPager->stmtSize = 0; */
+  /* pPager->stmtJSize = 0; */
+  /* pPager->nPage = 0; */
+  pPager->mxPgno = SQLITE_MAX_PAGE_COUNT;
+  /* pPager->state = PAGER_UNLOCK; */
+  /* pPager->errMask = 0; */
+  pPager->tempFile = (u8)tempFile;
+  assert( tempFile==PAGER_LOCKINGMODE_NORMAL 
+          || tempFile==PAGER_LOCKINGMODE_EXCLUSIVE );
+  assert( PAGER_LOCKINGMODE_EXCLUSIVE==1 );
+  pPager->exclusiveMode = (u8)tempFile; 
+  pPager->changeCountDone = pPager->tempFile;
+  pPager->memDb = (u8)memDb;
+  pPager->readOnly = (u8)readOnly;
+  assert( useJournal || pPager->tempFile );
+  pPager->noSync = pPager->tempFile;
+  if( pPager->noSync ){
+    assert( pPager->fullSync==0 );
+    assert( pPager->extraSync==0 );
+    assert( pPager->syncFlags==0 );
+    assert( pPager->walSyncFlags==0 );
+  }else{
+    pPager->fullSync = 1;
+    pPager->extraSync = 0;
+    pPager->syncFlags = SQLITE_SYNC_NORMAL;
+    pPager->walSyncFlags = SQLITE_SYNC_NORMAL | (SQLITE_SYNC_NORMAL<<2);
+  }
+  /* pPager->pFirst = 0; */
+  /* pPager->pFirstSynced = 0; */
+  /* pPager->pLast = 0; */
+  pPager->nExtra = (u16)nExtra;
+  pPager->journalSizeLimit = SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT;
+  assert( isOpen(pPager->fd) || tempFile );
+  setSectorSize(pPager);
+  if( !useJournal ){
+    pPager->journalMode = PAGER_JOURNALMODE_OFF;
+  }else if( memDb || memJM ){
+    pPager->journalMode = PAGER_JOURNALMODE_MEMORY;
+  }
+  /* pPager->xBusyHandler = 0; */
+  /* pPager->pBusyHandlerArg = 0; */
+  pPager->xReiniter = xReinit;
+  setGetterMethod(pPager);
+  /* memset(pPager->aHash, 0, sizeof(pPager->aHash)); */
+  /* pPager->szMmap = SQLITE_DEFAULT_MMAP_SIZE // will be set by btree.c */
+
+  *ppPager = pPager;
+  return SQLITE_OK;
+}
+
+/*
+** Return the sqlite3_file for the main database given the name
+** of the corresonding WAL or Journal name as passed into
+** xOpen.
+*/
+sqlite3_file *sqlite3_database_file_object(const char *zName){
+  Pager *pPager;
+  while( zName[-1]!=0 || zName[-2]!=0 || zName[-3]!=0 || zName[-4]!=0 ){
+    zName--;
+  }
+  pPager = *(Pager**)(zName - 4 - sizeof(Pager*));
+  return pPager->fd;
+}
+
+
+/*
+** This function is called after transitioning from PAGER_UNLOCK to
+** PAGER_SHARED state. It tests if there is a hot journal present in
+** the file-system for the given pager. A hot journal is one that 
+** needs to be played back. According to this function, a hot-journal
+** file exists if the following criteria are met:
+**
+**   * The journal file exists in the file system, and
+**   * No process holds a RESERVED or greater lock on the database file, and
+**   * The database file itself is greater than 0 bytes in size, and
+**   * The first byte of the journal file exists and is not 0x00.
+**
+** If the current size of the database file is 0 but a journal file
+** exists, that is probably an old journal left over from a prior
+** database with the same name. In this case the journal file is
+** just deleted using OsDelete, *pExists is set to 0 and SQLITE_OK
+** is returned.
+**
+** This routine does not check if there is a super-journal filename
+** at the end of the file. If there is, and that super-journal file
+** does not exist, then the journal file is not really hot. In this
+** case this routine will return a false-positive. The pager_playback()
+** routine will discover that the journal file is not really hot and 
+** will not roll it back. 
+**
+** If a hot-journal file is found to exist, *pExists is set to 1 and 
+** SQLITE_OK returned. If no hot-journal file is present, *pExists is
+** set to 0 and SQLITE_OK returned. If an IO error occurs while trying
+** to determine whether or not a hot-journal file exists, the IO error
+** code is returned and the value of *pExists is undefined.
+*/
+static int hasHotJournal(Pager *pPager, int *pExists){
+  sqlite3_vfs * const pVfs = pPager->pVfs;
+  int rc = SQLITE_OK;           /* Return code */
+  int exists = 1;               /* True if a journal file is present */
+  int jrnlOpen = !!isOpen(pPager->jfd);
+
+  assert( pPager->useJournal );
+  assert( isOpen(pPager->fd) );
+  assert( pPager->eState==PAGER_OPEN );
+
+  assert( jrnlOpen==0 || ( sqlite3OsDeviceCharacteristics(pPager->jfd) &
+    SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
+  ));
+
+  *pExists = 0;
+  if( !jrnlOpen ){
+    rc = sqlite3OsAccess(pVfs, pPager->zJournal, SQLITE_ACCESS_EXISTS, &exists);
+  }
+  if( rc==SQLITE_OK && exists ){
+    int locked = 0;             /* True if some process holds a RESERVED lock */
+
+    /* Race condition here:  Another process might have been holding the
+    ** the RESERVED lock and have a journal open at the sqlite3OsAccess() 
+    ** call above, but then delete the journal and drop the lock before
+    ** we get to the following sqlite3OsCheckReservedLock() call.  If that
+    ** is the case, this routine might think there is a hot journal when
+    ** in fact there is none.  This results in a false-positive which will
+    ** be dealt with by the playback routine.  Ticket #3883.
+    */
+    rc = sqlite3OsCheckReservedLock(pPager->fd, &locked);
+    if( rc==SQLITE_OK && !locked ){
+      Pgno nPage;                 /* Number of pages in database file */
+
+      assert( pPager->tempFile==0 );
+      rc = pagerPagecount(pPager, &nPage);
+      if( rc==SQLITE_OK ){
+        /* If the database is zero pages in size, that means that either (1) the
+        ** journal is a remnant from a prior database with the same name where
+        ** the database file but not the journal was deleted, or (2) the initial
+        ** transaction that populates a new database is being rolled back.
+        ** In either case, the journal file can be deleted.  However, take care
+        ** not to delete the journal file if it is already open due to
+        ** journal_mode=PERSIST.
+        */
+        if( nPage==0 && !jrnlOpen ){
+          sqlite3BeginBenignMalloc();
+          if( pagerLockDb(pPager, RESERVED_LOCK)==SQLITE_OK ){
+            sqlite3OsDelete(pVfs, pPager->zJournal, 0);
+            if( !pPager->exclusiveMode ) pagerUnlockDb(pPager, SHARED_LOCK);
+          }
+          sqlite3EndBenignMalloc();
+        }else{
+          /* The journal file exists and no other connection has a reserved
+          ** or greater lock on the database file. Now check that there is
+          ** at least one non-zero bytes at the start of the journal file.
+          ** If there is, then we consider this journal to be hot. If not, 
+          ** it can be ignored.
+          */
+          if( !jrnlOpen ){
+            int f = SQLITE_OPEN_READONLY|SQLITE_OPEN_MAIN_JOURNAL;
+            rc = sqlite3OsOpen(pVfs, pPager->zJournal, pPager->jfd, f, &f);
+          }
+          if( rc==SQLITE_OK ){
+            u8 first = 0;
+            rc = sqlite3OsRead(pPager->jfd, (void *)&first, 1, 0);
+            if( rc==SQLITE_IOERR_SHORT_READ ){
+              rc = SQLITE_OK;
+            }
+            if( !jrnlOpen ){
+              sqlite3OsClose(pPager->jfd);
+            }
+            *pExists = (first!=0);
+          }else if( rc==SQLITE_CANTOPEN ){
+            /* If we cannot open the rollback journal file in order to see if
+            ** it has a zero header, that might be due to an I/O error, or
+            ** it might be due to the race condition described above and in
+            ** ticket #3883.  Either way, assume that the journal is hot.
+            ** This might be a false positive.  But if it is, then the
+            ** automatic journal playback and recovery mechanism will deal
+            ** with it under an EXCLUSIVE lock where we do not need to
+            ** worry so much with race conditions.
+            */
+            *pExists = 1;
+            rc = SQLITE_OK;
+          }
+        }
+      }
+    }
+  }
+
+  return rc;
+}
+
+/*
+** This function is called to obtain a shared lock on the database file.
+** It is illegal to call sqlite3PagerGet() until after this function
+** has been successfully called. If a shared-lock is already held when
+** this function is called, it is a no-op.
+**
+** The following operations are also performed by this function.
+**
+**   1) If the pager is currently in PAGER_OPEN state (no lock held
+**      on the database file), then an attempt is made to obtain a
+**      SHARED lock on the database file. Immediately after obtaining
+**      the SHARED lock, the file-system is checked for a hot-journal,
+**      which is played back if present. Following any hot-journal 
+**      rollback, the contents of the cache are validated by checking
+**      the 'change-counter' field of the database file header and
+**      discarded if they are found to be invalid.
+**
+**   2) If the pager is running in exclusive-mode, and there are currently
+**      no outstanding references to any pages, and is in the error state,
+**      then an attempt is made to clear the error state by discarding
+**      the contents of the page cache and rolling back any open journal
+**      file.
+**
+** If everything is successful, SQLITE_OK is returned. If an IO error 
+** occurs while locking the database, checking for a hot-journal file or 
+** rolling back a journal file, the IO error code is returned.
+*/
+int sqlite3PagerSharedLock(Pager *pPager){
+  int rc = SQLITE_OK;                /* Return code */
+
+  /* This routine is only called from b-tree and only when there are no
+  ** outstanding pages. This implies that the pager state should either
+  ** be OPEN or READER. READER is only possible if the pager is or was in 
+  ** exclusive access mode.  */
+  assert( sqlite3PcacheRefCount(pPager->pPCache)==0 );
+  assert( assert_pager_state(pPager) );
+  assert( pPager->eState==PAGER_OPEN || pPager->eState==PAGER_READER );
+  assert( pPager->errCode==SQLITE_OK );
+
+  if( !pagerUseWal(pPager) && pPager->eState==PAGER_OPEN ){
+    int bHotJournal = 1;          /* True if there exists a hot journal-file */
+
+    assert( !MEMDB );
+    assert( pPager->tempFile==0 || pPager->eLock==EXCLUSIVE_LOCK );
+
+    rc = pager_wait_on_lock(pPager, SHARED_LOCK);
+    if( rc!=SQLITE_OK ){
+      assert( pPager->eLock==NO_LOCK || pPager->eLock==UNKNOWN_LOCK );
+      goto failed;
+    }
+
+    /* If a journal file exists, and there is no RESERVED lock on the
+    ** database file, then it either needs to be played back or deleted.
+    */
+    if( pPager->eLock<=SHARED_LOCK ){
+      rc = hasHotJournal(pPager, &bHotJournal);
+    }
+    if( rc!=SQLITE_OK ){
+      goto failed;
+    }
+    if( bHotJournal ){
+      if( pPager->readOnly ){
+        rc = SQLITE_READONLY_ROLLBACK;
+        goto failed;
+      }
+
+      /* Get an EXCLUSIVE lock on the database file. At this point it is
+      ** important that a RESERVED lock is not obtained on the way to the
+      ** EXCLUSIVE lock. If it were, another process might open the
+      ** database file, detect the RESERVED lock, and conclude that the
+      ** database is safe to read while this process is still rolling the 
+      ** hot-journal back.
+      ** 
+      ** Because the intermediate RESERVED lock is not requested, any
+      ** other process attempting to access the database file will get to 
+      ** this point in the code and fail to obtain its own EXCLUSIVE lock 
+      ** on the database file.
+      **
+      ** Unless the pager is in locking_mode=exclusive mode, the lock is
+      ** downgraded to SHARED_LOCK before this function returns.
+      */
+      rc = pagerLockDb(pPager, EXCLUSIVE_LOCK);
+      if( rc!=SQLITE_OK ){
+        goto failed;
+      }
+ 
+      /* If it is not already open and the file exists on disk, open the 
+      ** journal for read/write access. Write access is required because 
+      ** in exclusive-access mode the file descriptor will be kept open 
+      ** and possibly used for a transaction later on. Also, write-access 
+      ** is usually required to finalize the journal in journal_mode=persist 
+      ** mode (and also for journal_mode=truncate on some systems).
+      **
+      ** If the journal does not exist, it usually means that some 
+      ** other connection managed to get in and roll it back before 
+      ** this connection obtained the exclusive lock above. Or, it 
+      ** may mean that the pager was in the error-state when this
+      ** function was called and the journal file does not exist.
+      */
+      if( !isOpen(pPager->jfd) && pPager->journalMode!=PAGER_JOURNALMODE_OFF ){
+        sqlite3_vfs * const pVfs = pPager->pVfs;
+        int bExists;              /* True if journal file exists */
+        rc = sqlite3OsAccess(
+            pVfs, pPager->zJournal, SQLITE_ACCESS_EXISTS, &bExists);
+        if( rc==SQLITE_OK && bExists ){
+          int fout = 0;
+          int f = SQLITE_OPEN_READWRITE|SQLITE_OPEN_MAIN_JOURNAL;
+          assert( !pPager->tempFile );
+          rc = sqlite3OsOpen(pVfs, pPager->zJournal, pPager->jfd, f, &fout);
+          assert( rc!=SQLITE_OK || isOpen(pPager->jfd) );
+          if( rc==SQLITE_OK && fout&SQLITE_OPEN_READONLY ){
+            rc = SQLITE_CANTOPEN_BKPT;
+            sqlite3OsClose(pPager->jfd);
+          }
+        }
+      }
+ 
+      /* Playback and delete the journal.  Drop the database write
+      ** lock and reacquire the read lock. Purge the cache before
+      ** playing back the hot-journal so that we don't end up with
+      ** an inconsistent cache.  Sync the hot journal before playing
+      ** it back since the process that crashed and left the hot journal
+      ** probably did not sync it and we are required to always sync
+      ** the journal before playing it back.
+      */
+      if( isOpen(pPager->jfd) ){
+        assert( rc==SQLITE_OK );
+        rc = pagerSyncHotJournal(pPager);
+        if( rc==SQLITE_OK ){
+          rc = pager_playback(pPager, !pPager->tempFile);
+          pPager->eState = PAGER_OPEN;
+        }
+      }else if( !pPager->exclusiveMode ){
+        pagerUnlockDb(pPager, SHARED_LOCK);
+      }
+
+      if( rc!=SQLITE_OK ){
+        /* This branch is taken if an error occurs while trying to open
+        ** or roll back a hot-journal while holding an EXCLUSIVE lock. The
+        ** pager_unlock() routine will be called before returning to unlock
+        ** the file. If the unlock attempt fails, then Pager.eLock must be
+        ** set to UNKNOWN_LOCK (see the comment above the #define for 
+        ** UNKNOWN_LOCK above for an explanation). 
+        **
+        ** In order to get pager_unlock() to do this, set Pager.eState to
+        ** PAGER_ERROR now. This is not actually counted as a transition
+        ** to ERROR state in the state diagram at the top of this file,
+        ** since we know that the same call to pager_unlock() will very
+        ** shortly transition the pager object to the OPEN state. Calling
+        ** assert_pager_state() would fail now, as it should not be possible
+        ** to be in ERROR state when there are zero outstanding page 
+        ** references.
+        */
+        pager_error(pPager, rc);
+        goto failed;
+      }
+
+      assert( pPager->eState==PAGER_OPEN );
+      assert( (pPager->eLock==SHARED_LOCK)
+           || (pPager->exclusiveMode && pPager->eLock>SHARED_LOCK)
+      );
+    }
+
+    if( !pPager->tempFile && pPager->hasHeldSharedLock ){
+      /* The shared-lock has just been acquired then check to
+      ** see if the database has been modified.  If the database has changed,
+      ** flush the cache.  The hasHeldSharedLock flag prevents this from
+      ** occurring on the very first access to a file, in order to save a
+      ** single unnecessary sqlite3OsRead() call at the start-up.
+      **
+      ** Database changes are detected by looking at 15 bytes beginning
+      ** at offset 24 into the file.  The first 4 of these 16 bytes are
+      ** a 32-bit counter that is incremented with each change.  The
+      ** other bytes change randomly with each file change when
+      ** a codec is in use.
+      ** 
+      ** There is a vanishingly small chance that a change will not be 
+      ** detected.  The chance of an undetected change is so small that
+      ** it can be neglected.
+      */
+      char dbFileVers[sizeof(pPager->dbFileVers)];
+
+      IOTRACE(("CKVERS %p %d\n", pPager, sizeof(dbFileVers)));
+      rc = sqlite3OsRead(pPager->fd, &dbFileVers, sizeof(dbFileVers), 24);
+      if( rc!=SQLITE_OK ){
+        if( rc!=SQLITE_IOERR_SHORT_READ ){
+          goto failed;
+        }
+        memset(dbFileVers, 0, sizeof(dbFileVers));
+      }
+
+      if( memcmp(pPager->dbFileVers, dbFileVers, sizeof(dbFileVers))!=0 ){
+        pager_reset(pPager);
+
+        /* Unmap the database file. It is possible that external processes
+        ** may have truncated the database file and then extended it back
+        ** to its original size while this process was not holding a lock.
+        ** In this case there may exist a Pager.pMap mapping that appears
+        ** to be the right size but is not actually valid. Avoid this
+        ** possibility by unmapping the db here. */
+        if( USEFETCH(pPager) ){
+          sqlite3OsUnfetch(pPager->fd, 0, 0);
+        }
+      }
+    }
+
+    /* If there is a WAL file in the file-system, open this database in WAL
+    ** mode. Otherwise, the following function call is a no-op.
+    */
+    rc = pagerOpenWalIfPresent(pPager);
+#ifndef SQLITE_OMIT_WAL
+    assert( pPager->pWal==0 || rc==SQLITE_OK );
+#endif
+  }
+
+  if( pagerUseWal(pPager) ){
+    assert( rc==SQLITE_OK );
+    rc = pagerBeginReadTransaction(pPager);
+  }
+
+  if( pPager->tempFile==0 && pPager->eState==PAGER_OPEN && rc==SQLITE_OK ){
+    rc = pagerPagecount(pPager, &pPager->dbSize);
+  }
+
+ failed:
+  if( rc!=SQLITE_OK ){
+    assert( !MEMDB );
+    pager_unlock(pPager);
+    assert( pPager->eState==PAGER_OPEN );
+  }else{
+    pPager->eState = PAGER_READER;
+    pPager->hasHeldSharedLock = 1;
+  }
+  return rc;
+}
+
+/*
+** If the reference count has reached zero, rollback any active
+** transaction and unlock the pager.
+**
+** Except, in locking_mode=EXCLUSIVE when there is nothing to in
+** the rollback journal, the unlock is not performed and there is
+** nothing to rollback, so this routine is a no-op.
+*/ 
+static void pagerUnlockIfUnused(Pager *pPager){
+  if( sqlite3PcacheRefCount(pPager->pPCache)==0 ){
+    assert( pPager->nMmapOut==0 ); /* because page1 is never memory mapped */
+    pagerUnlockAndRollback(pPager);
+  }
+}
+
+/*
+** The page getter methods each try to acquire a reference to a
+** page with page number pgno. If the requested reference is 
+** successfully obtained, it is copied to *ppPage and SQLITE_OK returned.
+**
+** There are different implementations of the getter method depending
+** on the current state of the pager.
+**
+**     getPageNormal()         --  The normal getter
+**     getPageError()          --  Used if the pager is in an error state
+**     getPageMmap()           --  Used if memory-mapped I/O is enabled
+**
+** If the requested page is already in the cache, it is returned. 
+** Otherwise, a new page object is allocated and populated with data
+** read from the database file. In some cases, the pcache module may
+** choose not to allocate a new page object and may reuse an existing
+** object with no outstanding references.
+**
+** The extra data appended to a page is always initialized to zeros the 
+** first time a page is loaded into memory. If the page requested is 
+** already in the cache when this function is called, then the extra
+** data is left as it was when the page object was last used.
+**
+** If the database image is smaller than the requested page or if 
+** the flags parameter contains the PAGER_GET_NOCONTENT bit and the 
+** requested page is not already stored in the cache, then no 
+** actual disk read occurs. In this case the memory image of the 
+** page is initialized to all zeros. 
+**
+** If PAGER_GET_NOCONTENT is true, it means that we do not care about
+** the contents of the page. This occurs in two scenarios:
+**
+**   a) When reading a free-list leaf page from the database, and
+**
+**   b) When a savepoint is being rolled back and we need to load
+**      a new page into the cache to be filled with the data read
+**      from the savepoint journal.
+**
+** If PAGER_GET_NOCONTENT is true, then the data returned is zeroed instead
+** of being read from the database. Additionally, the bits corresponding
+** to pgno in Pager.pInJournal (bitvec of pages already written to the
+** journal file) and the PagerSavepoint.pInSavepoint bitvecs of any open
+** savepoints are set. This means if the page is made writable at any
+** point in the future, using a call to sqlite3PagerWrite(), its contents
+** will not be journaled. This saves IO.
+**
+** The acquisition might fail for several reasons.  In all cases,
+** an appropriate error code is returned and *ppPage is set to NULL.
+**
+** See also sqlite3PagerLookup().  Both this routine and Lookup() attempt
+** to find a page in the in-memory cache first.  If the page is not already
+** in memory, this routine goes to disk to read it in whereas Lookup()
+** just returns 0.  This routine acquires a read-lock the first time it
+** has to go to disk, and could also playback an old journal if necessary.
+** Since Lookup() never goes to disk, it never has to deal with locks
+** or journal files.
+*/
+static int getPageNormal(
+  Pager *pPager,      /* The pager open on the database file */
+  Pgno pgno,          /* Page number to fetch */
+  DbPage **ppPage,    /* Write a pointer to the page here */
+  int flags           /* PAGER_GET_XXX flags */
+){
+  int rc = SQLITE_OK;
+  PgHdr *pPg;
+  u8 noContent;                   /* True if PAGER_GET_NOCONTENT is set */
+  sqlite3_pcache_page *pBase;
+
+  assert( pPager->errCode==SQLITE_OK );
+  assert( pPager->eState>=PAGER_READER );
+  assert( assert_pager_state(pPager) );
+  assert( pPager->hasHeldSharedLock==1 );
+
+  if( pgno==0 ) return SQLITE_CORRUPT_BKPT;
+  pBase = sqlite3PcacheFetch(pPager->pPCache, pgno, 3);
+  if( pBase==0 ){
+    pPg = 0;
+    rc = sqlite3PcacheFetchStress(pPager->pPCache, pgno, &pBase);
+    if( rc!=SQLITE_OK ) goto pager_acquire_err;
+    if( pBase==0 ){
+      rc = SQLITE_NOMEM_BKPT;
+      goto pager_acquire_err;
+    }
+  }
+  pPg = *ppPage = sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pBase);
+  assert( pPg==(*ppPage) );
+  assert( pPg->pgno==pgno );
+  assert( pPg->pPager==pPager || pPg->pPager==0 );
+
+  noContent = (flags & PAGER_GET_NOCONTENT)!=0;
+  if( pPg->pPager && !noContent ){
+    /* In this case the pcache already contains an initialized copy of
+    ** the page. Return without further ado.  */
+    assert( pgno!=PAGER_SJ_PGNO(pPager) );
+    pPager->aStat[PAGER_STAT_HIT]++;
+    return SQLITE_OK;
+
+  }else{
+    /* The pager cache has created a new page. Its content needs to 
+    ** be initialized. But first some error checks:
+    **
+    ** (*) obsolete.  Was: maximum page number is 2^31
+    ** (2) Never try to fetch the locking page
+    */
+    if( pgno==PAGER_SJ_PGNO(pPager) ){
+      rc = SQLITE_CORRUPT_BKPT;
+      goto pager_acquire_err;
+    }
+
+    pPg->pPager = pPager;
+
+    assert( !isOpen(pPager->fd) || !MEMDB );
+    if( !isOpen(pPager->fd) || pPager->dbSize<pgno || noContent ){
+      if( pgno>pPager->mxPgno ){
+        rc = SQLITE_FULL;
+        goto pager_acquire_err;
+      }
+      if( noContent ){
+        /* Failure to set the bits in the InJournal bit-vectors is benign.
+        ** It merely means that we might do some extra work to journal a 
+        ** page that does not need to be journaled.  Nevertheless, be sure 
+        ** to test the case where a malloc error occurs while trying to set 
+        ** a bit in a bit vector.
+        */
+        sqlite3BeginBenignMalloc();
+        if( pgno<=pPager->dbOrigSize ){
+          TESTONLY( rc = ) sqlite3BitvecSet(pPager->pInJournal, pgno);
+          testcase( rc==SQLITE_NOMEM );
+        }
+        TESTONLY( rc = ) addToSavepointBitvecs(pPager, pgno);
+        testcase( rc==SQLITE_NOMEM );
+        sqlite3EndBenignMalloc();
+      }
+      memset(pPg->pData, 0, pPager->pageSize);
+      IOTRACE(("ZERO %p %d\n", pPager, pgno));
+    }else{
+      assert( pPg->pPager==pPager );
+      pPager->aStat[PAGER_STAT_MISS]++;
+      rc = readDbPage(pPg);
+      if( rc!=SQLITE_OK ){
+        goto pager_acquire_err;
+      }
+    }
+    pager_set_pagehash(pPg);
+  }
+  return SQLITE_OK;
+
+pager_acquire_err:
+  assert( rc!=SQLITE_OK );
+  if( pPg ){
+    sqlite3PcacheDrop(pPg);
+  }
+  pagerUnlockIfUnused(pPager);
+  *ppPage = 0;
+  return rc;
+}
+
+#if SQLITE_MAX_MMAP_SIZE>0
+/* The page getter for when memory-mapped I/O is enabled */
+static int getPageMMap(
+  Pager *pPager,      /* The pager open on the database file */
+  Pgno pgno,          /* Page number to fetch */
+  DbPage **ppPage,    /* Write a pointer to the page here */
+  int flags           /* PAGER_GET_XXX flags */
+){
+  int rc = SQLITE_OK;
+  PgHdr *pPg = 0;
+  u32 iFrame = 0;                 /* Frame to read from WAL file */
+
+  /* It is acceptable to use a read-only (mmap) page for any page except
+  ** page 1 if there is no write-transaction open or the ACQUIRE_READONLY
+  ** flag was specified by the caller. And so long as the db is not a 
+  ** temporary or in-memory database.  */
+  const int bMmapOk = (pgno>1
+   && (pPager->eState==PAGER_READER || (flags & PAGER_GET_READONLY))
+  );
+
+  assert( USEFETCH(pPager) );
+
+  /* Optimization note:  Adding the "pgno<=1" term before "pgno==0" here
+  ** allows the compiler optimizer to reuse the results of the "pgno>1"
+  ** test in the previous statement, and avoid testing pgno==0 in the
+  ** common case where pgno is large. */
+  if( pgno<=1 && pgno==0 ){
+    return SQLITE_CORRUPT_BKPT;
+  }
+  assert( pPager->eState>=PAGER_READER );
+  assert( assert_pager_state(pPager) );
+  assert( pPager->hasHeldSharedLock==1 );
+  assert( pPager->errCode==SQLITE_OK );
+
+  if( bMmapOk && pagerUseWal(pPager) ){
+    rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame);
+    if( rc!=SQLITE_OK ){
+      *ppPage = 0;
+      return rc;
+    }
+  }
+  if( bMmapOk && iFrame==0 ){
+    void *pData = 0;
+    rc = sqlite3OsFetch(pPager->fd, 
+        (i64)(pgno-1) * pPager->pageSize, pPager->pageSize, &pData
+    );
+    if( rc==SQLITE_OK && pData ){
+      if( pPager->eState>PAGER_READER || pPager->tempFile ){
+        pPg = sqlite3PagerLookup(pPager, pgno);
+      }
+      if( pPg==0 ){
+        rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg);
+      }else{
+        sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1)*pPager->pageSize, pData);
+      }
+      if( pPg ){
+        assert( rc==SQLITE_OK );
+        *ppPage = pPg;
+        return SQLITE_OK;
+      }
+    }
+    if( rc!=SQLITE_OK ){
+      *ppPage = 0;
+      return rc;
+    }
+  }
+  return getPageNormal(pPager, pgno, ppPage, flags);
+}
+#endif /* SQLITE_MAX_MMAP_SIZE>0 */
+
+/* The page getter method for when the pager is an error state */
+static int getPageError(
+  Pager *pPager,      /* The pager open on the database file */
+  Pgno pgno,          /* Page number to fetch */
+  DbPage **ppPage,    /* Write a pointer to the page here */
+  int flags           /* PAGER_GET_XXX flags */
+){
+  UNUSED_PARAMETER(pgno);
+  UNUSED_PARAMETER(flags);
+  assert( pPager->errCode!=SQLITE_OK );
+  *ppPage = 0;
+  return pPager->errCode;
+}
+
+
+/* Dispatch all page fetch requests to the appropriate getter method.
+*/
+int sqlite3PagerGet(
+  Pager *pPager,      /* The pager open on the database file */
+  Pgno pgno,          /* Page number to fetch */
+  DbPage **ppPage,    /* Write a pointer to the page here */
+  int flags           /* PAGER_GET_XXX flags */
+){
+  /* printf("PAGE %u\n", pgno); fflush(stdout); */
+  return pPager->xGet(pPager, pgno, ppPage, flags);
+}
+
+/*
+** Acquire a page if it is already in the in-memory cache.  Do
+** not read the page from disk.  Return a pointer to the page,
+** or 0 if the page is not in cache. 
+**
+** See also sqlite3PagerGet().  The difference between this routine
+** and sqlite3PagerGet() is that _get() will go to the disk and read
+** in the page if the page is not already in cache.  This routine
+** returns NULL if the page is not in cache or if a disk I/O error 
+** has ever happened.
+*/
+DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno){
+  sqlite3_pcache_page *pPage;
+  assert( pPager!=0 );
+  assert( pgno!=0 );
+  assert( pPager->pPCache!=0 );
+  pPage = sqlite3PcacheFetch(pPager->pPCache, pgno, 0);
+  assert( pPage==0 || pPager->hasHeldSharedLock );
+  if( pPage==0 ) return 0;
+  return sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pPage);
+}
+
+/*
+** Release a page reference.
+**
+** The sqlite3PagerUnref() and sqlite3PagerUnrefNotNull() may only be
+** used if we know that the page being released is not the last page.
+** The btree layer always holds page1 open until the end, so these first
+** to routines can be used to release any page other than BtShared.pPage1.
+**
+** Use sqlite3PagerUnrefPageOne() to release page1.  This latter routine
+** checks the total number of outstanding pages and if the number of
+** pages reaches zero it drops the database lock.
+*/
+void sqlite3PagerUnrefNotNull(DbPage *pPg){
+  TESTONLY( Pager *pPager = pPg->pPager; )
+  assert( pPg!=0 );
+  if( pPg->flags & PGHDR_MMAP ){
+    assert( pPg->pgno!=1 );  /* Page1 is never memory mapped */
+    pagerReleaseMapPage(pPg);
+  }else{
+    sqlite3PcacheRelease(pPg);
+  }
+  /* Do not use this routine to release the last reference to page1 */
+  assert( sqlite3PcacheRefCount(pPager->pPCache)>0 );
+}
+void sqlite3PagerUnref(DbPage *pPg){
+  if( pPg ) sqlite3PagerUnrefNotNull(pPg);
+}
+void sqlite3PagerUnrefPageOne(DbPage *pPg){
+  Pager *pPager;
+  assert( pPg!=0 );
+  assert( pPg->pgno==1 );
+  assert( (pPg->flags & PGHDR_MMAP)==0 ); /* Page1 is never memory mapped */
+  pPager = pPg->pPager;
+  sqlite3PcacheRelease(pPg);
+  pagerUnlockIfUnused(pPager);
+}
+
+/*
+** This function is called at the start of every write transaction.
+** There must already be a RESERVED or EXCLUSIVE lock on the database 
+** file when this routine is called.
+**
+** Open the journal file for pager pPager and write a journal header
+** to the start of it. If there are active savepoints, open the sub-journal
+** as well. This function is only used when the journal file is being 
+** opened to write a rollback log for a transaction. It is not used 
+** when opening a hot journal file to roll it back.
+**
+** If the journal file is already open (as it may be in exclusive mode),
+** then this function just writes a journal header to the start of the
+** already open file. 
+**
+** Whether or not the journal file is opened by this function, the
+** Pager.pInJournal bitvec structure is allocated.
+**
+** Return SQLITE_OK if everything is successful. Otherwise, return 
+** SQLITE_NOMEM if the attempt to allocate Pager.pInJournal fails, or 
+** an IO error code if opening or writing the journal file fails.
+*/
+static int pager_open_journal(Pager *pPager){
+  int rc = SQLITE_OK;                        /* Return code */
+  sqlite3_vfs * const pVfs = pPager->pVfs;   /* Local cache of vfs pointer */
+
+  assert( pPager->eState==PAGER_WRITER_LOCKED );
+  assert( assert_pager_state(pPager) );
+  assert( pPager->pInJournal==0 );
+  
+  /* If already in the error state, this function is a no-op.  But on
+  ** the other hand, this routine is never called if we are already in
+  ** an error state. */
+  if( NEVER(pPager->errCode) ) return pPager->errCode;
+
+  if( !pagerUseWal(pPager) && pPager->journalMode!=PAGER_JOURNALMODE_OFF ){
+    pPager->pInJournal = sqlite3BitvecCreate(pPager->dbSize);
+    if( pPager->pInJournal==0 ){
+      return SQLITE_NOMEM_BKPT;
+    }
+  
+    /* Open the journal file if it is not already open. */
+    if( !isOpen(pPager->jfd) ){
+      if( pPager->journalMode==PAGER_JOURNALMODE_MEMORY ){
+        sqlite3MemJournalOpen(pPager->jfd);
+      }else{
+        int flags = SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE;
+        int nSpill;
+
+        if( pPager->tempFile ){
+          flags |= (SQLITE_OPEN_DELETEONCLOSE|SQLITE_OPEN_TEMP_JOURNAL);
+          flags |= SQLITE_OPEN_EXCLUSIVE;
+          nSpill = sqlite3Config.nStmtSpill;
+        }else{
+          flags |= SQLITE_OPEN_MAIN_JOURNAL;
+          nSpill = jrnlBufferSize(pPager);
+        }
+          
+        /* Verify that the database still has the same name as it did when
+        ** it was originally opened. */
+        rc = databaseIsUnmoved(pPager);
+        if( rc==SQLITE_OK ){
+          rc = sqlite3JournalOpen (
+              pVfs, pPager->zJournal, pPager->jfd, flags, nSpill
+          );
+        }
+      }
+      assert( rc!=SQLITE_OK || isOpen(pPager->jfd) );
+    }
+  
+  
+    /* Write the first journal header to the journal file and open 
+    ** the sub-journal if necessary.
+    */
+    if( rc==SQLITE_OK ){
+      /* TODO: Check if all of these are really required. */
+      pPager->nRec = 0;
+      pPager->journalOff = 0;
+      pPager->setSuper = 0;
+      pPager->journalHdr = 0;
+      rc = writeJournalHdr(pPager);
+    }
+  }
+
+  if( rc!=SQLITE_OK ){
+    sqlite3BitvecDestroy(pPager->pInJournal);
+    pPager->pInJournal = 0;
+    pPager->journalOff = 0;
+  }else{
+    assert( pPager->eState==PAGER_WRITER_LOCKED );
+    pPager->eState = PAGER_WRITER_CACHEMOD;
+  }
+
+  return rc;
+}
+
+/*
+** Begin a write-transaction on the specified pager object. If a 
+** write-transaction has already been opened, this function is a no-op.
+**
+** If the exFlag argument is false, then acquire at least a RESERVED
+** lock on the database file. If exFlag is true, then acquire at least
+** an EXCLUSIVE lock. If such a lock is already held, no locking 
+** functions need be called.
+**
+** If the subjInMemory argument is non-zero, then any sub-journal opened
+** within this transaction will be opened as an in-memory file. This
+** has no effect if the sub-journal is already opened (as it may be when
+** running in exclusive mode) or if the transaction does not require a
+** sub-journal. If the subjInMemory argument is zero, then any required
+** sub-journal is implemented in-memory if pPager is an in-memory database, 
+** or using a temporary file otherwise.
+*/
+int sqlite3PagerBegin(Pager *pPager, int exFlag, int subjInMemory){
+  int rc = SQLITE_OK;
+
+  if( pPager->errCode ) return pPager->errCode;
+  assert( pPager->eState>=PAGER_READER && pPager->eState<PAGER_ERROR );
+  pPager->subjInMemory = (u8)subjInMemory;
+
+  if( pPager->eState==PAGER_READER ){
+    assert( pPager->pInJournal==0 );
+
+    if( pagerUseWal(pPager) ){
+      /* If the pager is configured to use locking_mode=exclusive, and an
+      ** exclusive lock on the database is not already held, obtain it now.
+      */
+      if( pPager->exclusiveMode && sqlite3WalExclusiveMode(pPager->pWal, -1) ){
+        rc = pagerLockDb(pPager, EXCLUSIVE_LOCK);
+        if( rc!=SQLITE_OK ){
+          return rc;
+        }
+        (void)sqlite3WalExclusiveMode(pPager->pWal, 1);
+      }
+
+      /* Grab the write lock on the log file. If successful, upgrade to
+      ** PAGER_RESERVED state. Otherwise, return an error code to the caller.
+      ** The busy-handler is not invoked if another connection already
+      ** holds the write-lock. If possible, the upper layer will call it.
+      */
+      rc = sqlite3WalBeginWriteTransaction(pPager->pWal);
+    }else{
+      /* Obtain a RESERVED lock on the database file. If the exFlag parameter
+      ** is true, then immediately upgrade this to an EXCLUSIVE lock. The
+      ** busy-handler callback can be used when upgrading to the EXCLUSIVE
+      ** lock, but not when obtaining the RESERVED lock.
+      */
+      rc = pagerLockDb(pPager, RESERVED_LOCK);
+      if( rc==SQLITE_OK && exFlag ){
+        rc = pager_wait_on_lock(pPager, EXCLUSIVE_LOCK);
+      }
+    }
+
+    if( rc==SQLITE_OK ){
+      /* Change to WRITER_LOCKED state.
+      **
+      ** WAL mode sets Pager.eState to PAGER_WRITER_LOCKED or CACHEMOD
+      ** when it has an open transaction, but never to DBMOD or FINISHED.
+      ** This is because in those states the code to roll back savepoint 
+      ** transactions may copy data from the sub-journal into the database 
+      ** file as well as into the page cache. Which would be incorrect in 
+      ** WAL mode.
+      */
+      pPager->eState = PAGER_WRITER_LOCKED;
+      pPager->dbHintSize = pPager->dbSize;
+      pPager->dbFileSize = pPager->dbSize;
+      pPager->dbOrigSize = pPager->dbSize;
+      pPager->journalOff = 0;
+    }
+
+    assert( rc==SQLITE_OK || pPager->eState==PAGER_READER );
+    assert( rc!=SQLITE_OK || pPager->eState==PAGER_WRITER_LOCKED );
+    assert( assert_pager_state(pPager) );
+  }
+
+  PAGERTRACE(("TRANSACTION %d\n", PAGERID(pPager)));
+  return rc;
+}
+
+/*
+** Write page pPg onto the end of the rollback journal.
+*/
+static SQLITE_NOINLINE int pagerAddPageToRollbackJournal(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  int rc;
+  u32 cksum;
+  char *pData2;
+  i64 iOff = pPager->journalOff;
+
+  /* We should never write to the journal file the page that
+  ** contains the database locks.  The following assert verifies
+  ** that we do not. */
+  assert( pPg->pgno!=PAGER_SJ_PGNO(pPager) );
+
+  assert( pPager->journalHdr<=pPager->journalOff );
+  pData2 = pPg->pData;
+  cksum = pager_cksum(pPager, (u8*)pData2);
+
+  /* Even if an IO or diskfull error occurs while journalling the
+  ** page in the block above, set the need-sync flag for the page.
+  ** Otherwise, when the transaction is rolled back, the logic in
+  ** playback_one_page() will think that the page needs to be restored
+  ** in the database file. And if an IO error occurs while doing so,
+  ** then corruption may follow.
+  */
+  pPg->flags |= PGHDR_NEED_SYNC;
+
+  rc = write32bits(pPager->jfd, iOff, pPg->pgno);
+  if( rc!=SQLITE_OK ) return rc;
+  rc = sqlite3OsWrite(pPager->jfd, pData2, pPager->pageSize, iOff+4);
+  if( rc!=SQLITE_OK ) return rc;
+  rc = write32bits(pPager->jfd, iOff+pPager->pageSize+4, cksum);
+  if( rc!=SQLITE_OK ) return rc;
+
+  IOTRACE(("JOUT %p %d %lld %d\n", pPager, pPg->pgno, 
+           pPager->journalOff, pPager->pageSize));
+  PAGER_INCR(sqlite3_pager_writej_count);
+  PAGERTRACE(("JOURNAL %d page %d needSync=%d hash(%08x)\n",
+       PAGERID(pPager), pPg->pgno, 
+       ((pPg->flags&PGHDR_NEED_SYNC)?1:0), pager_pagehash(pPg)));
+
+  pPager->journalOff += 8 + pPager->pageSize;
+  pPager->nRec++;
+  assert( pPager->pInJournal!=0 );
+  rc = sqlite3BitvecSet(pPager->pInJournal, pPg->pgno);
+  testcase( rc==SQLITE_NOMEM );
+  assert( rc==SQLITE_OK || rc==SQLITE_NOMEM );
+  rc |= addToSavepointBitvecs(pPager, pPg->pgno);
+  assert( rc==SQLITE_OK || rc==SQLITE_NOMEM );
+  return rc;
+}
+
+/*
+** Mark a single data page as writeable. The page is written into the 
+** main journal or sub-journal as required. If the page is written into
+** one of the journals, the corresponding bit is set in the 
+** Pager.pInJournal bitvec and the PagerSavepoint.pInSavepoint bitvecs
+** of any open savepoints as appropriate.
+*/
+static int pager_write(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  int rc = SQLITE_OK;
+
+  /* This routine is not called unless a write-transaction has already 
+  ** been started. The journal file may or may not be open at this point.
+  ** It is never called in the ERROR state.
+  */
+  assert( pPager->eState==PAGER_WRITER_LOCKED
+       || pPager->eState==PAGER_WRITER_CACHEMOD
+       || pPager->eState==PAGER_WRITER_DBMOD
+  );
+  assert( assert_pager_state(pPager) );
+  assert( pPager->errCode==0 );
+  assert( pPager->readOnly==0 );
+  CHECK_PAGE(pPg);
+
+  /* The journal file needs to be opened. Higher level routines have already
+  ** obtained the necessary locks to begin the write-transaction, but the
+  ** rollback journal might not yet be open. Open it now if this is the case.
+  **
+  ** This is done before calling sqlite3PcacheMakeDirty() on the page. 
+  ** Otherwise, if it were done after calling sqlite3PcacheMakeDirty(), then
+  ** an error might occur and the pager would end up in WRITER_LOCKED state
+  ** with pages marked as dirty in the cache.
+  */
+  if( pPager->eState==PAGER_WRITER_LOCKED ){
+    rc = pager_open_journal(pPager);
+    if( rc!=SQLITE_OK ) return rc;
+  }
+  assert( pPager->eState>=PAGER_WRITER_CACHEMOD );
+  assert( assert_pager_state(pPager) );
+
+  /* Mark the page that is about to be modified as dirty. */
+  sqlite3PcacheMakeDirty(pPg);
+
+  /* If a rollback journal is in use, them make sure the page that is about
+  ** to change is in the rollback journal, or if the page is a new page off
+  ** then end of the file, make sure it is marked as PGHDR_NEED_SYNC.
+  */
+  assert( (pPager->pInJournal!=0) == isOpen(pPager->jfd) );
+  if( pPager->pInJournal!=0
+   && sqlite3BitvecTestNotNull(pPager->pInJournal, pPg->pgno)==0
+  ){
+    assert( pagerUseWal(pPager)==0 );
+    if( pPg->pgno<=pPager->dbOrigSize ){
+      rc = pagerAddPageToRollbackJournal(pPg);
+      if( rc!=SQLITE_OK ){
+        return rc;
+      }
+    }else{
+      if( pPager->eState!=PAGER_WRITER_DBMOD ){
+        pPg->flags |= PGHDR_NEED_SYNC;
+      }
+      PAGERTRACE(("APPEND %d page %d needSync=%d\n",
+              PAGERID(pPager), pPg->pgno,
+             ((pPg->flags&PGHDR_NEED_SYNC)?1:0)));
+    }
+  }
+
+  /* The PGHDR_DIRTY bit is set above when the page was added to the dirty-list
+  ** and before writing the page into the rollback journal.  Wait until now,
+  ** after the page has been successfully journalled, before setting the
+  ** PGHDR_WRITEABLE bit that indicates that the page can be safely modified.
+  */
+  pPg->flags |= PGHDR_WRITEABLE;
+  
+  /* If the statement journal is open and the page is not in it,
+  ** then write the page into the statement journal.
+  */
+  if( pPager->nSavepoint>0 ){
+    rc = subjournalPageIfRequired(pPg);
+  }
+
+  /* Update the database size and return. */
+  if( pPager->dbSize<pPg->pgno ){
+    pPager->dbSize = pPg->pgno;
+  }
+  return rc;
+}
+
+/*
+** This is a variant of sqlite3PagerWrite() that runs when the sector size
+** is larger than the page size.  SQLite makes the (reasonable) assumption that
+** all bytes of a sector are written together by hardware.  Hence, all bytes of
+** a sector need to be journalled in case of a power loss in the middle of
+** a write.
+**
+** Usually, the sector size is less than or equal to the page size, in which
+** case pages can be individually written.  This routine only runs in the
+** exceptional case where the page size is smaller than the sector size.
+*/
+static SQLITE_NOINLINE int pagerWriteLargeSector(PgHdr *pPg){
+  int rc = SQLITE_OK;          /* Return code */
+  Pgno nPageCount;             /* Total number of pages in database file */
+  Pgno pg1;                    /* First page of the sector pPg is located on. */
+  int nPage = 0;               /* Number of pages starting at pg1 to journal */
+  int ii;                      /* Loop counter */
+  int needSync = 0;            /* True if any page has PGHDR_NEED_SYNC */
+  Pager *pPager = pPg->pPager; /* The pager that owns pPg */
+  Pgno nPagePerSector = (pPager->sectorSize/pPager->pageSize);
+
+  /* Set the doNotSpill NOSYNC bit to 1. This is because we cannot allow
+  ** a journal header to be written between the pages journaled by
+  ** this function.
+  */
+  assert( !MEMDB );
+  assert( (pPager->doNotSpill & SPILLFLAG_NOSYNC)==0 );
+  pPager->doNotSpill |= SPILLFLAG_NOSYNC;
+
+  /* This trick assumes that both the page-size and sector-size are
+  ** an integer power of 2. It sets variable pg1 to the identifier
+  ** of the first page of the sector pPg is located on.
+  */
+  pg1 = ((pPg->pgno-1) & ~(nPagePerSector-1)) + 1;
+
+  nPageCount = pPager->dbSize;
+  if( pPg->pgno>nPageCount ){
+    nPage = (pPg->pgno - pg1)+1;
+  }else if( (pg1+nPagePerSector-1)>nPageCount ){
+    nPage = nPageCount+1-pg1;
+  }else{
+    nPage = nPagePerSector;
+  }
+  assert(nPage>0);
+  assert(pg1<=pPg->pgno);
+  assert((pg1+nPage)>pPg->pgno);
+
+  for(ii=0; ii<nPage && rc==SQLITE_OK; ii++){
+    Pgno pg = pg1+ii;
+    PgHdr *pPage;
+    if( pg==pPg->pgno || !sqlite3BitvecTest(pPager->pInJournal, pg) ){
+      if( pg!=PAGER_SJ_PGNO(pPager) ){
+        rc = sqlite3PagerGet(pPager, pg, &pPage, 0);
+        if( rc==SQLITE_OK ){
+          rc = pager_write(pPage);
+          if( pPage->flags&PGHDR_NEED_SYNC ){
+            needSync = 1;
+          }
+          sqlite3PagerUnrefNotNull(pPage);
+        }
+      }
+    }else if( (pPage = sqlite3PagerLookup(pPager, pg))!=0 ){
+      if( pPage->flags&PGHDR_NEED_SYNC ){
+        needSync = 1;
+      }
+      sqlite3PagerUnrefNotNull(pPage);
+    }
+  }
+
+  /* If the PGHDR_NEED_SYNC flag is set for any of the nPage pages 
+  ** starting at pg1, then it needs to be set for all of them. Because
+  ** writing to any of these nPage pages may damage the others, the
+  ** journal file must contain sync()ed copies of all of them
+  ** before any of them can be written out to the database file.
+  */
+  if( rc==SQLITE_OK && needSync ){
+    assert( !MEMDB );
+    for(ii=0; ii<nPage; ii++){
+      PgHdr *pPage = sqlite3PagerLookup(pPager, pg1+ii);
+      if( pPage ){
+        pPage->flags |= PGHDR_NEED_SYNC;
+        sqlite3PagerUnrefNotNull(pPage);
+      }
+    }
+  }
+
+  assert( (pPager->doNotSpill & SPILLFLAG_NOSYNC)!=0 );
+  pPager->doNotSpill &= ~SPILLFLAG_NOSYNC;
+  return rc;
+}
+
+/*
+** Mark a data page as writeable. This routine must be called before 
+** making changes to a page. The caller must check the return value 
+** of this function and be careful not to change any page data unless 
+** this routine returns SQLITE_OK.
+**
+** The difference between this function and pager_write() is that this
+** function also deals with the special case where 2 or more pages
+** fit on a single disk sector. In this case all co-resident pages
+** must have been written to the journal file before returning.
+**
+** If an error occurs, SQLITE_NOMEM or an IO error code is returned
+** as appropriate. Otherwise, SQLITE_OK.
+*/
+int sqlite3PagerWrite(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  assert( (pPg->flags & PGHDR_MMAP)==0 );
+  assert( pPager->eState>=PAGER_WRITER_LOCKED );
+  assert( assert_pager_state(pPager) );
+  if( (pPg->flags & PGHDR_WRITEABLE)!=0 && pPager->dbSize>=pPg->pgno ){
+    if( pPager->nSavepoint ) return subjournalPageIfRequired(pPg);
+    return SQLITE_OK;
+  }else if( pPager->errCode ){
+    return pPager->errCode;
+  }else if( pPager->sectorSize > (u32)pPager->pageSize ){
+    assert( pPager->tempFile==0 );
+    return pagerWriteLargeSector(pPg);
+  }else{
+    return pager_write(pPg);
+  }
+}
+
+/*
+** Return TRUE if the page given in the argument was previously passed
+** to sqlite3PagerWrite().  In other words, return TRUE if it is ok
+** to change the content of the page.
+*/
+#ifndef NDEBUG
+int sqlite3PagerIswriteable(DbPage *pPg){
+  return pPg->flags & PGHDR_WRITEABLE;
+}
+#endif
+
+/*
+** A call to this routine tells the pager that it is not necessary to
+** write the information on page pPg back to the disk, even though
+** that page might be marked as dirty.  This happens, for example, when
+** the page has been added as a leaf of the freelist and so its
+** content no longer matters.
+**
+** The overlying software layer calls this routine when all of the data
+** on the given page is unused. The pager marks the page as clean so
+** that it does not get written to disk.
+**
+** Tests show that this optimization can quadruple the speed of large 
+** DELETE operations.
+**
+** This optimization cannot be used with a temp-file, as the page may
+** have been dirty at the start of the transaction. In that case, if
+** memory pressure forces page pPg out of the cache, the data does need 
+** to be written out to disk so that it may be read back in if the 
+** current transaction is rolled back.
+*/
+void sqlite3PagerDontWrite(PgHdr *pPg){
+  Pager *pPager = pPg->pPager;
+  if( !pPager->tempFile && (pPg->flags&PGHDR_DIRTY) && pPager->nSavepoint==0 ){
+    PAGERTRACE(("DONT_WRITE page %d of %d\n", pPg->pgno, PAGERID(pPager)));
+    IOTRACE(("CLEAN %p %d\n", pPager, pPg->pgno))
+    pPg->flags |= PGHDR_DONT_WRITE;
+    pPg->flags &= ~PGHDR_WRITEABLE;
+    testcase( pPg->flags & PGHDR_NEED_SYNC );
+    pager_set_pagehash(pPg);
+  }
+}
+
+/*
+** This routine is called to increment the value of the database file 
+** change-counter, stored as a 4-byte big-endian integer starting at 
+** byte offset 24 of the pager file.  The secondary change counter at
+** 92 is also updated, as is the SQLite version number at offset 96.
+**
+** But this only happens if the pPager->changeCountDone flag is false.
+** To avoid excess churning of page 1, the update only happens once.
+** See also the pager_write_changecounter() routine that does an 
+** unconditional update of the change counters.
+**
+** If the isDirectMode flag is zero, then this is done by calling 
+** sqlite3PagerWrite() on page 1, then modifying the contents of the
+** page data. In this case the file will be updated when the current
+** transaction is committed.
+**
+** The isDirectMode flag may only be non-zero if the library was compiled
+** with the SQLITE_ENABLE_ATOMIC_WRITE macro defined. In this case,
+** if isDirect is non-zero, then the database file is updated directly
+** by writing an updated version of page 1 using a call to the 
+** sqlite3OsWrite() function.
+*/
+static int pager_incr_changecounter(Pager *pPager, int isDirectMode){
+  int rc = SQLITE_OK;
+
+  assert( pPager->eState==PAGER_WRITER_CACHEMOD
+       || pPager->eState==PAGER_WRITER_DBMOD
+  );
+  assert( assert_pager_state(pPager) );
+
+  /* Declare and initialize constant integer 'isDirect'. If the
+  ** atomic-write optimization is enabled in this build, then isDirect
+  ** is initialized to the value passed as the isDirectMode parameter
+  ** to this function. Otherwise, it is always set to zero.
+  **
+  ** The idea is that if the atomic-write optimization is not
+  ** enabled at compile time, the compiler can omit the tests of
+  ** 'isDirect' below, as well as the block enclosed in the
+  ** "if( isDirect )" condition.
+  */
+#ifndef SQLITE_ENABLE_ATOMIC_WRITE
+# define DIRECT_MODE 0
+  assert( isDirectMode==0 );
+  UNUSED_PARAMETER(isDirectMode);
+#else
+# define DIRECT_MODE isDirectMode
+#endif
+
+  if( !pPager->changeCountDone && ALWAYS(pPager->dbSize>0) ){
+    PgHdr *pPgHdr;                /* Reference to page 1 */
+
+    assert( !pPager->tempFile && isOpen(pPager->fd) );
+
+    /* Open page 1 of the file for writing. */
+    rc = sqlite3PagerGet(pPager, 1, &pPgHdr, 0);
+    assert( pPgHdr==0 || rc==SQLITE_OK );
+
+    /* If page one was fetched successfully, and this function is not
+    ** operating in direct-mode, make page 1 writable.  When not in 
+    ** direct mode, page 1 is always held in cache and hence the PagerGet()
+    ** above is always successful - hence the ALWAYS on rc==SQLITE_OK.
+    */
+    if( !DIRECT_MODE && ALWAYS(rc==SQLITE_OK) ){
+      rc = sqlite3PagerWrite(pPgHdr);
+    }
+
+    if( rc==SQLITE_OK ){
+      /* Actually do the update of the change counter */
+      pager_write_changecounter(pPgHdr);
+
+      /* If running in direct mode, write the contents of page 1 to the file. */
+      if( DIRECT_MODE ){
+        const void *zBuf;
+        assert( pPager->dbFileSize>0 );
+        zBuf = pPgHdr->pData;
+        if( rc==SQLITE_OK ){
+          rc = sqlite3OsWrite(pPager->fd, zBuf, pPager->pageSize, 0);
+          pPager->aStat[PAGER_STAT_WRITE]++;
+        }
+        if( rc==SQLITE_OK ){
+          /* Update the pager's copy of the change-counter. Otherwise, the
+          ** next time a read transaction is opened the cache will be
+          ** flushed (as the change-counter values will not match).  */
+          const void *pCopy = (const void *)&((const char *)zBuf)[24];
+          memcpy(&pPager->dbFileVers, pCopy, sizeof(pPager->dbFileVers));
+          pPager->changeCountDone = 1;
+        }
+      }else{
+        pPager->changeCountDone = 1;
+      }
+    }
+
+    /* Release the page reference. */
+    sqlite3PagerUnref(pPgHdr);
+  }
+  return rc;
+}
+
+/*
+** Sync the database file to disk. This is a no-op for in-memory databases
+** or pages with the Pager.noSync flag set.
+**
+** If successful, or if called on a pager for which it is a no-op, this
+** function returns SQLITE_OK. Otherwise, an IO error code is returned.
+*/
+int sqlite3PagerSync(Pager *pPager, const char *zSuper){
+  int rc = SQLITE_OK;
+  void *pArg = (void*)zSuper;
+  rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_SYNC, pArg);
+  if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK;
+  if( rc==SQLITE_OK && !pPager->noSync ){
+    assert( !MEMDB );
+    rc = sqlite3OsSync(pPager->fd, pPager->syncFlags);
+  }
+  return rc;
+}
+
+/*
+** This function may only be called while a write-transaction is active in
+** rollback. If the connection is in WAL mode, this call is a no-op. 
+** Otherwise, if the connection does not already have an EXCLUSIVE lock on 
+** the database file, an attempt is made to obtain one.
+**
+** If the EXCLUSIVE lock is already held or the attempt to obtain it is
+** successful, or the connection is in WAL mode, SQLITE_OK is returned.
+** Otherwise, either SQLITE_BUSY or an SQLITE_IOERR_XXX error code is 
+** returned.
+*/
+int sqlite3PagerExclusiveLock(Pager *pPager){
+  int rc = pPager->errCode;
+  assert( assert_pager_state(pPager) );
+  if( rc==SQLITE_OK ){
+    assert( pPager->eState==PAGER_WRITER_CACHEMOD 
+         || pPager->eState==PAGER_WRITER_DBMOD 
+         || pPager->eState==PAGER_WRITER_LOCKED 
+    );
+    assert( assert_pager_state(pPager) );
+    if( 0==pagerUseWal(pPager) ){
+      rc = pager_wait_on_lock(pPager, EXCLUSIVE_LOCK);
+    }
+  }
+  return rc;
+}
+
+/*
+** Sync the database file for the pager pPager. zSuper points to the name
+** of a super-journal file that should be written into the individual
+** journal file. zSuper may be NULL, which is interpreted as no 
+** super-journal (a single database transaction).
+**
+** This routine ensures that:
+**
+**   * The database file change-counter is updated,
+**   * the journal is synced (unless the atomic-write optimization is used),
+**   * all dirty pages are written to the database file, 
+**   * the database file is truncated (if required), and
+**   * the database file synced. 
+**
+** The only thing that remains to commit the transaction is to finalize 
+** (delete, truncate or zero the first part of) the journal file (or 
+** delete the super-journal file if specified).
+**
+** Note that if zSuper==NULL, this does not overwrite a previous value
+** passed to an sqlite3PagerCommitPhaseOne() call.
+**
+** If the final parameter - noSync - is true, then the database file itself
+** is not synced. The caller must call sqlite3PagerSync() directly to
+** sync the database file before calling CommitPhaseTwo() to delete the
+** journal file in this case.
+*/
+int sqlite3PagerCommitPhaseOne(
+  Pager *pPager,                  /* Pager object */
+  const char *zSuper,            /* If not NULL, the super-journal name */
+  int noSync                      /* True to omit the xSync on the db file */
+){
+  int rc = SQLITE_OK;             /* Return code */
+
+  assert( pPager->eState==PAGER_WRITER_LOCKED
+       || pPager->eState==PAGER_WRITER_CACHEMOD
+       || pPager->eState==PAGER_WRITER_DBMOD
+       || pPager->eState==PAGER_ERROR
+  );
+  assert( assert_pager_state(pPager) );
+
+  /* If a prior error occurred, report that error again. */
+  if( NEVER(pPager->errCode) ) return pPager->errCode;
+
+  /* Provide the ability to easily simulate an I/O error during testing */
+  if( sqlite3FaultSim(400) ) return SQLITE_IOERR;
+
+  PAGERTRACE(("DATABASE SYNC: File=%s zSuper=%s nSize=%d\n", 
+      pPager->zFilename, zSuper, pPager->dbSize));
+
+  /* If no database changes have been made, return early. */
+  if( pPager->eState<PAGER_WRITER_CACHEMOD ) return SQLITE_OK;
+
+  assert( MEMDB==0 || pPager->tempFile );
+  assert( isOpen(pPager->fd) || pPager->tempFile );
+  if( 0==pagerFlushOnCommit(pPager, 1) ){
+    /* If this is an in-memory db, or no pages have been written to, or this
+    ** function has already been called, it is mostly a no-op.  However, any
+    ** backup in progress needs to be restarted.  */
+    sqlite3BackupRestart(pPager->pBackup);
+  }else{
+    PgHdr *pList;
+    if( pagerUseWal(pPager) ){
+      PgHdr *pPageOne = 0;
+      pList = sqlite3PcacheDirtyList(pPager->pPCache);
+      if( pList==0 ){
+        /* Must have at least one page for the WAL commit flag.
+        ** Ticket [2d1a5c67dfc2363e44f29d9bbd57f] 2011-05-18 */
+        rc = sqlite3PagerGet(pPager, 1, &pPageOne, 0);
+        pList = pPageOne;
+        pList->pDirty = 0;
+      }
+      assert( rc==SQLITE_OK );
+      if( ALWAYS(pList) ){
+        rc = pagerWalFrames(pPager, pList, pPager->dbSize, 1);
+      }
+      sqlite3PagerUnref(pPageOne);
+      if( rc==SQLITE_OK ){
+        sqlite3PcacheCleanAll(pPager->pPCache);
+      }
+    }else{
+      /* The bBatch boolean is true if the batch-atomic-write commit method
+      ** should be used.  No rollback journal is created if batch-atomic-write
+      ** is enabled.
+      */
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+      sqlite3_file *fd = pPager->fd;
+      int bBatch = zSuper==0    /* An SQLITE_IOCAP_BATCH_ATOMIC commit */
+        && (sqlite3OsDeviceCharacteristics(fd) & SQLITE_IOCAP_BATCH_ATOMIC)
+        && !pPager->noSync
+        && sqlite3JournalIsInMemory(pPager->jfd);
+#else
+#     define bBatch 0
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+      /* The following block updates the change-counter. Exactly how it
+      ** does this depends on whether or not the atomic-update optimization
+      ** was enabled at compile time, and if this transaction meets the 
+      ** runtime criteria to use the operation: 
+      **
+      **    * The file-system supports the atomic-write property for
+      **      blocks of size page-size, and 
+      **    * This commit is not part of a multi-file transaction, and
+      **    * Exactly one page has been modified and store in the journal file.
+      **
+      ** If the optimization was not enabled at compile time, then the
+      ** pager_incr_changecounter() function is called to update the change
+      ** counter in 'indirect-mode'. If the optimization is compiled in but
+      ** is not applicable to this transaction, call sqlite3JournalCreate()
+      ** to make sure the journal file has actually been created, then call
+      ** pager_incr_changecounter() to update the change-counter in indirect
+      ** mode. 
+      **
+      ** Otherwise, if the optimization is both enabled and applicable,
+      ** then call pager_incr_changecounter() to update the change-counter
+      ** in 'direct' mode. In this case the journal file will never be
+      ** created for this transaction.
+      */
+      if( bBatch==0 ){
+        PgHdr *pPg;
+        assert( isOpen(pPager->jfd) 
+            || pPager->journalMode==PAGER_JOURNALMODE_OFF 
+            || pPager->journalMode==PAGER_JOURNALMODE_WAL 
+            );
+        if( !zSuper && isOpen(pPager->jfd) 
+         && pPager->journalOff==jrnlBufferSize(pPager) 
+         && pPager->dbSize>=pPager->dbOrigSize
+         && (!(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
+        ){
+          /* Update the db file change counter via the direct-write method. The 
+          ** following call will modify the in-memory representation of page 1 
+          ** to include the updated change counter and then write page 1 
+          ** directly to the database file. Because of the atomic-write 
+          ** property of the host file-system, this is safe.
+          */
+          rc = pager_incr_changecounter(pPager, 1);
+        }else{
+          rc = sqlite3JournalCreate(pPager->jfd);
+          if( rc==SQLITE_OK ){
+            rc = pager_incr_changecounter(pPager, 0);
+          }
+        }
+      }
+#else  /* SQLITE_ENABLE_ATOMIC_WRITE */
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+      if( zSuper ){
+        rc = sqlite3JournalCreate(pPager->jfd);
+        if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+        assert( bBatch==0 );
+      }
+#endif
+      rc = pager_incr_changecounter(pPager, 0);
+#endif /* !SQLITE_ENABLE_ATOMIC_WRITE */
+      if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+  
+      /* Write the super-journal name into the journal file. If a
+      ** super-journal file name has already been written to the journal file, 
+      ** or if zSuper is NULL (no super-journal), then this call is a no-op.
+      */
+      rc = writeSuperJournal(pPager, zSuper);
+      if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+  
+      /* Sync the journal file and write all dirty pages to the database.
+      ** If the atomic-update optimization is being used, this sync will not 
+      ** create the journal file or perform any real IO.
+      **
+      ** Because the change-counter page was just modified, unless the
+      ** atomic-update optimization is used it is almost certain that the
+      ** journal requires a sync here. However, in locking_mode=exclusive
+      ** on a system under memory pressure it is just possible that this is 
+      ** not the case. In this case it is likely enough that the redundant
+      ** xSync() call will be changed to a no-op by the OS anyhow. 
+      */
+      rc = syncJournal(pPager, 0);
+      if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+
+      pList = sqlite3PcacheDirtyList(pPager->pPCache);
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+      if( bBatch ){
+        rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_BEGIN_ATOMIC_WRITE, 0);
+        if( rc==SQLITE_OK ){
+          rc = pager_write_pagelist(pPager, pList);
+          if( rc==SQLITE_OK ){
+            rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_COMMIT_ATOMIC_WRITE, 0);
+          }
+          if( rc!=SQLITE_OK ){
+            sqlite3OsFileControlHint(fd, SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE, 0);
+          }
+        }
+
+        if( (rc&0xFF)==SQLITE_IOERR && rc!=SQLITE_IOERR_NOMEM ){
+          rc = sqlite3JournalCreate(pPager->jfd);
+          if( rc!=SQLITE_OK ){
+            sqlite3OsClose(pPager->jfd);
+            goto commit_phase_one_exit;
+          }
+          bBatch = 0;
+        }else{
+          sqlite3OsClose(pPager->jfd);
+        }
+      }
+#endif /* SQLITE_ENABLE_BATCH_ATOMIC_WRITE */
+
+      if( bBatch==0 ){
+        rc = pager_write_pagelist(pPager, pList);
+      }
+      if( rc!=SQLITE_OK ){
+        assert( rc!=SQLITE_IOERR_BLOCKED );
+        goto commit_phase_one_exit;
+      }
+      sqlite3PcacheCleanAll(pPager->pPCache);
+
+      /* If the file on disk is smaller than the database image, use 
+      ** pager_truncate to grow the file here. This can happen if the database
+      ** image was extended as part of the current transaction and then the
+      ** last page in the db image moved to the free-list. In this case the
+      ** last page is never written out to disk, leaving the database file
+      ** undersized. Fix this now if it is the case.  */
+      if( pPager->dbSize>pPager->dbFileSize ){
+        Pgno nNew = pPager->dbSize - (pPager->dbSize==PAGER_SJ_PGNO(pPager));
+        assert( pPager->eState==PAGER_WRITER_DBMOD );
+        rc = pager_truncate(pPager, nNew);
+        if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+      }
+  
+      /* Finally, sync the database file. */
+      if( !noSync ){
+        rc = sqlite3PagerSync(pPager, zSuper);
+      }
+      IOTRACE(("DBSYNC %p\n", pPager))
+    }
+  }
+
+commit_phase_one_exit:
+  if( rc==SQLITE_OK && !pagerUseWal(pPager) ){
+    pPager->eState = PAGER_WRITER_FINISHED;
+  }
+  return rc;
+}
+
+
+/*
+** When this function is called, the database file has been completely
+** updated to reflect the changes made by the current transaction and
+** synced to disk. The journal file still exists in the file-system 
+** though, and if a failure occurs at this point it will eventually
+** be used as a hot-journal and the current transaction rolled back.
+**
+** This function finalizes the journal file, either by deleting, 
+** truncating or partially zeroing it, so that it cannot be used 
+** for hot-journal rollback. Once this is done the transaction is
+** irrevocably committed.
+**
+** If an error occurs, an IO error code is returned and the pager
+** moves into the error state. Otherwise, SQLITE_OK is returned.
+*/
+int sqlite3PagerCommitPhaseTwo(Pager *pPager){
+  int rc = SQLITE_OK;                  /* Return code */
+
+  /* This routine should not be called if a prior error has occurred.
+  ** But if (due to a coding error elsewhere in the system) it does get
+  ** called, just return the same error code without doing anything. */
+  if( NEVER(pPager->errCode) ) return pPager->errCode;
+  pPager->iDataVersion++;
+
+  assert( pPager->eState==PAGER_WRITER_LOCKED
+       || pPager->eState==PAGER_WRITER_FINISHED
+       || (pagerUseWal(pPager) && pPager->eState==PAGER_WRITER_CACHEMOD)
+  );
+  assert( assert_pager_state(pPager) );
+
+  /* An optimization. If the database was not actually modified during
+  ** this transaction, the pager is running in exclusive-mode and is
+  ** using persistent journals, then this function is a no-op.
+  **
+  ** The start of the journal file currently contains a single journal 
+  ** header with the nRec field set to 0. If such a journal is used as
+  ** a hot-journal during hot-journal rollback, 0 changes will be made
+  ** to the database file. So there is no need to zero the journal 
+  ** header. Since the pager is in exclusive mode, there is no need
+  ** to drop any locks either.
+  */
+  if( pPager->eState==PAGER_WRITER_LOCKED 
+   && pPager->exclusiveMode 
+   && pPager->journalMode==PAGER_JOURNALMODE_PERSIST
+  ){
+    assert( pPager->journalOff==JOURNAL_HDR_SZ(pPager) || !pPager->journalOff );
+    pPager->eState = PAGER_READER;
+    return SQLITE_OK;
+  }
+
+  PAGERTRACE(("COMMIT %d\n", PAGERID(pPager)));
+  rc = pager_end_transaction(pPager, pPager->setSuper, 1);
+  return pager_error(pPager, rc);
+}
+
+/*
+** If a write transaction is open, then all changes made within the 
+** transaction are reverted and the current write-transaction is closed.
+** The pager falls back to PAGER_READER state if successful, or PAGER_ERROR
+** state if an error occurs.
+**
+** If the pager is already in PAGER_ERROR state when this function is called,
+** it returns Pager.errCode immediately. No work is performed in this case.
+**
+** Otherwise, in rollback mode, this function performs two functions:
+**
+**   1) It rolls back the journal file, restoring all database file and 
+**      in-memory cache pages to the state they were in when the transaction
+**      was opened, and
+**
+**   2) It finalizes the journal file, so that it is not used for hot
+**      rollback at any point in the future.
+**
+** Finalization of the journal file (task 2) is only performed if the 
+** rollback is successful.
+**
+** In WAL mode, all cache-entries containing data modified within the
+** current transaction are either expelled from the cache or reverted to
+** their pre-transaction state by re-reading data from the database or
+** WAL files. The WAL transaction is then closed.
+*/
+int sqlite3PagerRollback(Pager *pPager){
+  int rc = SQLITE_OK;                  /* Return code */
+  PAGERTRACE(("ROLLBACK %d\n", PAGERID(pPager)));
+
+  /* PagerRollback() is a no-op if called in READER or OPEN state. If
+  ** the pager is already in the ERROR state, the rollback is not 
+  ** attempted here. Instead, the error code is returned to the caller.
+  */
+  assert( assert_pager_state(pPager) );
+  if( pPager->eState==PAGER_ERROR ) return pPager->errCode;
+  if( pPager->eState<=PAGER_READER ) return SQLITE_OK;
+
+  if( pagerUseWal(pPager) ){
+    int rc2;
+    rc = sqlite3PagerSavepoint(pPager, SAVEPOINT_ROLLBACK, -1);
+    rc2 = pager_end_transaction(pPager, pPager->setSuper, 0);
+    if( rc==SQLITE_OK ) rc = rc2;
+  }else if( !isOpen(pPager->jfd) || pPager->eState==PAGER_WRITER_LOCKED ){
+    int eState = pPager->eState;
+    rc = pager_end_transaction(pPager, 0, 0);
+    if( !MEMDB && eState>PAGER_WRITER_LOCKED ){
+      /* This can happen using journal_mode=off. Move the pager to the error 
+      ** state to indicate that the contents of the cache may not be trusted.
+      ** Any active readers will get SQLITE_ABORT.
+      */
+      pPager->errCode = SQLITE_ABORT;
+      pPager->eState = PAGER_ERROR;
+      setGetterMethod(pPager);
+      return rc;
+    }
+  }else{
+    rc = pager_playback(pPager, 0);
+  }
+
+  assert( pPager->eState==PAGER_READER || rc!=SQLITE_OK );
+  assert( rc==SQLITE_OK || rc==SQLITE_FULL || rc==SQLITE_CORRUPT
+          || rc==SQLITE_NOMEM || (rc&0xFF)==SQLITE_IOERR 
+          || rc==SQLITE_CANTOPEN
+  );
+
+  /* If an error occurs during a ROLLBACK, we can no longer trust the pager
+  ** cache. So call pager_error() on the way out to make any error persistent.
+  */
+  return pager_error(pPager, rc);
+}
+
+/*
+** Return TRUE if the database file is opened read-only.  Return FALSE
+** if the database is (in theory) writable.
+*/
+u8 sqlite3PagerIsreadonly(Pager *pPager){
+  return pPager->readOnly;
+}
+
+#ifdef SQLITE_DEBUG
+/*
+** Return the sum of the reference counts for all pages held by pPager.
+*/
+int sqlite3PagerRefcount(Pager *pPager){
+  return sqlite3PcacheRefCount(pPager->pPCache);
+}
+#endif
+
+/*
+** Return the approximate number of bytes of memory currently
+** used by the pager and its associated cache.
+*/
+int sqlite3PagerMemUsed(Pager *pPager){
+  int perPageSize = pPager->pageSize + pPager->nExtra
+    + (int)(sizeof(PgHdr) + 5*sizeof(void*));
+  return perPageSize*sqlite3PcachePagecount(pPager->pPCache)
+           + sqlite3MallocSize(pPager)
+           + pPager->pageSize;
+}
+
+/*
+** Return the number of references to the specified page.
+*/
+int sqlite3PagerPageRefcount(DbPage *pPage){
+  return sqlite3PcachePageRefcount(pPage);
+}
+
+#ifdef SQLITE_TEST
+/*
+** This routine is used for testing and analysis only.
+*/
+int *sqlite3PagerStats(Pager *pPager){
+  static int a[11];
+  a[0] = sqlite3PcacheRefCount(pPager->pPCache);
+  a[1] = sqlite3PcachePagecount(pPager->pPCache);
+  a[2] = sqlite3PcacheGetCachesize(pPager->pPCache);
+  a[3] = pPager->eState==PAGER_OPEN ? -1 : (int) pPager->dbSize;
+  a[4] = pPager->eState;
+  a[5] = pPager->errCode;
+  a[6] = pPager->aStat[PAGER_STAT_HIT];
+  a[7] = pPager->aStat[PAGER_STAT_MISS];
+  a[8] = 0;  /* Used to be pPager->nOvfl */
+  a[9] = pPager->nRead;
+  a[10] = pPager->aStat[PAGER_STAT_WRITE];
+  return a;
+}
+#endif
+
+/*
+** Parameter eStat must be one of SQLITE_DBSTATUS_CACHE_HIT, _MISS, _WRITE,
+** or _WRITE+1.  The SQLITE_DBSTATUS_CACHE_WRITE+1 case is a translation
+** of SQLITE_DBSTATUS_CACHE_SPILL.  The _SPILL case is not contiguous because
+** it was added later.
+**
+** Before returning, *pnVal is incremented by the
+** current cache hit or miss count, according to the value of eStat. If the 
+** reset parameter is non-zero, the cache hit or miss count is zeroed before 
+** returning.
+*/
+void sqlite3PagerCacheStat(Pager *pPager, int eStat, int reset, int *pnVal){
+
+  assert( eStat==SQLITE_DBSTATUS_CACHE_HIT
+       || eStat==SQLITE_DBSTATUS_CACHE_MISS
+       || eStat==SQLITE_DBSTATUS_CACHE_WRITE
+       || eStat==SQLITE_DBSTATUS_CACHE_WRITE+1
+  );
+
+  assert( SQLITE_DBSTATUS_CACHE_HIT+1==SQLITE_DBSTATUS_CACHE_MISS );
+  assert( SQLITE_DBSTATUS_CACHE_HIT+2==SQLITE_DBSTATUS_CACHE_WRITE );
+  assert( PAGER_STAT_HIT==0 && PAGER_STAT_MISS==1
+           && PAGER_STAT_WRITE==2 && PAGER_STAT_SPILL==3 );
+
+  eStat -= SQLITE_DBSTATUS_CACHE_HIT;
+  *pnVal += pPager->aStat[eStat];
+  if( reset ){
+    pPager->aStat[eStat] = 0;
+  }
+}
+
+/*
+** Return true if this is an in-memory or temp-file backed pager.
+*/
+int sqlite3PagerIsMemdb(Pager *pPager){
+  return pPager->tempFile || pPager->memVfs;
+}
+
+/*
+** Check that there are at least nSavepoint savepoints open. If there are
+** currently less than nSavepoints open, then open one or more savepoints
+** to make up the difference. If the number of savepoints is already
+** equal to nSavepoint, then this function is a no-op.
+**
+** If a memory allocation fails, SQLITE_NOMEM is returned. If an error 
+** occurs while opening the sub-journal file, then an IO error code is
+** returned. Otherwise, SQLITE_OK.
+*/
+static SQLITE_NOINLINE int pagerOpenSavepoint(Pager *pPager, int nSavepoint){
+  int rc = SQLITE_OK;                       /* Return code */
+  int nCurrent = pPager->nSavepoint;        /* Current number of savepoints */
+  int ii;                                   /* Iterator variable */
+  PagerSavepoint *aNew;                     /* New Pager.aSavepoint array */
+
+  assert( pPager->eState>=PAGER_WRITER_LOCKED );
+  assert( assert_pager_state(pPager) );
+  assert( nSavepoint>nCurrent && pPager->useJournal );
+
+  /* Grow the Pager.aSavepoint array using realloc(). Return SQLITE_NOMEM
+  ** if the allocation fails. Otherwise, zero the new portion in case a 
+  ** malloc failure occurs while populating it in the for(...) loop below.
+  */
+  aNew = (PagerSavepoint *)sqlite3Realloc(
+      pPager->aSavepoint, sizeof(PagerSavepoint)*nSavepoint
+  );
+  if( !aNew ){
+    return SQLITE_NOMEM_BKPT;
+  }
+  memset(&aNew[nCurrent], 0, (nSavepoint-nCurrent) * sizeof(PagerSavepoint));
+  pPager->aSavepoint = aNew;
+
+  /* Populate the PagerSavepoint structures just allocated. */
+  for(ii=nCurrent; ii<nSavepoint; ii++){
+    aNew[ii].nOrig = pPager->dbSize;
+    if( isOpen(pPager->jfd) && pPager->journalOff>0 ){
+      aNew[ii].iOffset = pPager->journalOff;
+    }else{
+      aNew[ii].iOffset = JOURNAL_HDR_SZ(pPager);
+    }
+    aNew[ii].iSubRec = pPager->nSubRec;
+    aNew[ii].pInSavepoint = sqlite3BitvecCreate(pPager->dbSize);
+    aNew[ii].bTruncateOnRelease = 1;
+    if( !aNew[ii].pInSavepoint ){
+      return SQLITE_NOMEM_BKPT;
+    }
+    if( pagerUseWal(pPager) ){
+      sqlite3WalSavepoint(pPager->pWal, aNew[ii].aWalData);
+    }
+    pPager->nSavepoint = ii+1;
+  }
+  assert( pPager->nSavepoint==nSavepoint );
+  assertTruncateConstraint(pPager);
+  return rc;
+}
+int sqlite3PagerOpenSavepoint(Pager *pPager, int nSavepoint){
+  assert( pPager->eState>=PAGER_WRITER_LOCKED );
+  assert( assert_pager_state(pPager) );
+
+  if( nSavepoint>pPager->nSavepoint && pPager->useJournal ){
+    return pagerOpenSavepoint(pPager, nSavepoint);
+  }else{
+    return SQLITE_OK;
+  }
+}
+
+
+/*
+** This function is called to rollback or release (commit) a savepoint.
+** The savepoint to release or rollback need not be the most recently 
+** created savepoint.
+**
+** Parameter op is always either SAVEPOINT_ROLLBACK or SAVEPOINT_RELEASE.
+** If it is SAVEPOINT_RELEASE, then release and destroy the savepoint with
+** index iSavepoint. If it is SAVEPOINT_ROLLBACK, then rollback all changes
+** that have occurred since the specified savepoint was created.
+**
+** The savepoint to rollback or release is identified by parameter 
+** iSavepoint. A value of 0 means to operate on the outermost savepoint
+** (the first created). A value of (Pager.nSavepoint-1) means operate
+** on the most recently created savepoint. If iSavepoint is greater than
+** (Pager.nSavepoint-1), then this function is a no-op.
+**
+** If a negative value is passed to this function, then the current
+** transaction is rolled back. This is different to calling 
+** sqlite3PagerRollback() because this function does not terminate
+** the transaction or unlock the database, it just restores the 
+** contents of the database to its original state. 
+**
+** In any case, all savepoints with an index greater than iSavepoint 
+** are destroyed. If this is a release operation (op==SAVEPOINT_RELEASE),
+** then savepoint iSavepoint is also destroyed.
+**
+** This function may return SQLITE_NOMEM if a memory allocation fails,
+** or an IO error code if an IO error occurs while rolling back a 
+** savepoint. If no errors occur, SQLITE_OK is returned.
+*/ 
+int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint){
+  int rc = pPager->errCode;
+  
+#ifdef SQLITE_ENABLE_ZIPVFS
+  if( op==SAVEPOINT_RELEASE ) rc = SQLITE_OK;
+#endif
+
+  assert( op==SAVEPOINT_RELEASE || op==SAVEPOINT_ROLLBACK );
+  assert( iSavepoint>=0 || op==SAVEPOINT_ROLLBACK );
+
+  if( rc==SQLITE_OK && iSavepoint<pPager->nSavepoint ){
+    int ii;            /* Iterator variable */
+    int nNew;          /* Number of remaining savepoints after this op. */
+
+    /* Figure out how many savepoints will still be active after this
+    ** operation. Store this value in nNew. Then free resources associated 
+    ** with any savepoints that are destroyed by this operation.
+    */
+    nNew = iSavepoint + (( op==SAVEPOINT_RELEASE ) ? 0 : 1);
+    for(ii=nNew; ii<pPager->nSavepoint; ii++){
+      sqlite3BitvecDestroy(pPager->aSavepoint[ii].pInSavepoint);
+    }
+    pPager->nSavepoint = nNew;
+
+    /* Truncate the sub-journal so that it only includes the parts
+    ** that are still in use. */
+    if( op==SAVEPOINT_RELEASE ){
+      PagerSavepoint *pRel = &pPager->aSavepoint[nNew];
+      if( pRel->bTruncateOnRelease && isOpen(pPager->sjfd) ){
+        /* Only truncate if it is an in-memory sub-journal. */
+        if( sqlite3JournalIsInMemory(pPager->sjfd) ){
+          i64 sz = (pPager->pageSize+4)*(i64)pRel->iSubRec;
+          rc = sqlite3OsTruncate(pPager->sjfd, sz);
+          assert( rc==SQLITE_OK );
+        }
+        pPager->nSubRec = pRel->iSubRec;
+      }
+    }
+    /* Else this is a rollback operation, playback the specified savepoint.
+    ** If this is a temp-file, it is possible that the journal file has
+    ** not yet been opened. In this case there have been no changes to
+    ** the database file, so the playback operation can be skipped.
+    */
+    else if( pagerUseWal(pPager) || isOpen(pPager->jfd) ){
+      PagerSavepoint *pSavepoint = (nNew==0)?0:&pPager->aSavepoint[nNew-1];
+      rc = pagerPlaybackSavepoint(pPager, pSavepoint);
+      assert(rc!=SQLITE_DONE);
+    }
+    
+#ifdef SQLITE_ENABLE_ZIPVFS
+    /* If the cache has been modified but the savepoint cannot be rolled 
+    ** back journal_mode=off, put the pager in the error state. This way,
+    ** if the VFS used by this pager includes ZipVFS, the entire transaction
+    ** can be rolled back at the ZipVFS level.  */
+    else if( 
+        pPager->journalMode==PAGER_JOURNALMODE_OFF 
+     && pPager->eState>=PAGER_WRITER_CACHEMOD
+    ){
+      pPager->errCode = SQLITE_ABORT;
+      pPager->eState = PAGER_ERROR;
+      setGetterMethod(pPager);
+    }
+#endif
+  }
+
+  return rc;
+}
+
+/*
+** Return the full pathname of the database file.
+**
+** Except, if the pager is in-memory only, then return an empty string if
+** nullIfMemDb is true.  This routine is called with nullIfMemDb==1 when
+** used to report the filename to the user, for compatibility with legacy
+** behavior.  But when the Btree needs to know the filename for matching to
+** shared cache, it uses nullIfMemDb==0 so that in-memory databases can
+** participate in shared-cache.
+**
+** The return value to this routine is always safe to use with
+** sqlite3_uri_parameter() and sqlite3_filename_database() and friends.
+*/
+const char *sqlite3PagerFilename(const Pager *pPager, int nullIfMemDb){
+  static const char zFake[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+  return (nullIfMemDb && pPager->memDb) ? &zFake[4] : pPager->zFilename;
+}
+
+/*
+** Return the VFS structure for the pager.
+*/
+sqlite3_vfs *sqlite3PagerVfs(Pager *pPager){
+  return pPager->pVfs;
+}
+
+/*
+** Return the file handle for the database file associated
+** with the pager.  This might return NULL if the file has
+** not yet been opened.
+*/
+sqlite3_file *sqlite3PagerFile(Pager *pPager){
+  return pPager->fd;
+}
+
+/*
+** Return the file handle for the journal file (if it exists).
+** This will be either the rollback journal or the WAL file.
+*/
+sqlite3_file *sqlite3PagerJrnlFile(Pager *pPager){
+#if SQLITE_OMIT_WAL
+  return pPager->jfd;
+#else
+  return pPager->pWal ? sqlite3WalFile(pPager->pWal) : pPager->jfd;
+#endif
+}
+
+/*
+** Return the full pathname of the journal file.
+*/
+const char *sqlite3PagerJournalname(Pager *pPager){
+  return pPager->zJournal;
+}
+
+#ifndef SQLITE_OMIT_AUTOVACUUM
+/*
+** Move the page pPg to location pgno in the file.
+**
+** There must be no references to the page previously located at
+** pgno (which we call pPgOld) though that page is allowed to be
+** in cache.  If the page previously located at pgno is not already
+** in the rollback journal, it is not put there by by this routine.
+**
+** References to the page pPg remain valid. Updating any
+** meta-data associated with pPg (i.e. data stored in the nExtra bytes
+** allocated along with the page) is the responsibility of the caller.
+**
+** A transaction must be active when this routine is called. It used to be
+** required that a statement transaction was not active, but this restriction
+** has been removed (CREATE INDEX needs to move a page when a statement
+** transaction is active).
+**
+** If the fourth argument, isCommit, is non-zero, then this page is being
+** moved as part of a database reorganization just before the transaction 
+** is being committed. In this case, it is guaranteed that the database page 
+** pPg refers to will not be written to again within this transaction.
+**
+** This function may return SQLITE_NOMEM or an IO error code if an error
+** occurs. Otherwise, it returns SQLITE_OK.
+*/
+int sqlite3PagerMovepage(Pager *pPager, DbPage *pPg, Pgno pgno, int isCommit){
+  PgHdr *pPgOld;               /* The page being overwritten. */
+  Pgno needSyncPgno = 0;       /* Old value of pPg->pgno, if sync is required */
+  int rc;                      /* Return code */
+  Pgno origPgno;               /* The original page number */
+
+  assert( pPg->nRef>0 );
+  assert( pPager->eState==PAGER_WRITER_CACHEMOD
+       || pPager->eState==PAGER_WRITER_DBMOD
+  );
+  assert( assert_pager_state(pPager) );
+
+  /* In order to be able to rollback, an in-memory database must journal
+  ** the page we are moving from.
+  */
+  assert( pPager->tempFile || !MEMDB );
+  if( pPager->tempFile ){
+    rc = sqlite3PagerWrite(pPg);
+    if( rc ) return rc;
+  }
+
+  /* If the page being moved is dirty and has not been saved by the latest
+  ** savepoint, then save the current contents of the page into the 
+  ** sub-journal now. This is required to handle the following scenario:
+  **
+  **   BEGIN;
+  **     <journal page X, then modify it in memory>
+  **     SAVEPOINT one;
+  **       <Move page X to location Y>
+  **     ROLLBACK TO one;
+  **
+  ** If page X were not written to the sub-journal here, it would not
+  ** be possible to restore its contents when the "ROLLBACK TO one"
+  ** statement were is processed.
+  **
+  ** subjournalPage() may need to allocate space to store pPg->pgno into
+  ** one or more savepoint bitvecs. This is the reason this function
+  ** may return SQLITE_NOMEM.
+  */
+  if( (pPg->flags & PGHDR_DIRTY)!=0
+   && SQLITE_OK!=(rc = subjournalPageIfRequired(pPg))
+  ){
+    return rc;
+  }
+
+  PAGERTRACE(("MOVE %d page %d (needSync=%d) moves to %d\n", 
+      PAGERID(pPager), pPg->pgno, (pPg->flags&PGHDR_NEED_SYNC)?1:0, pgno));
+  IOTRACE(("MOVE %p %d %d\n", pPager, pPg->pgno, pgno))
+
+  /* If the journal needs to be sync()ed before page pPg->pgno can
+  ** be written to, store pPg->pgno in local variable needSyncPgno.
+  **
+  ** If the isCommit flag is set, there is no need to remember that
+  ** the journal needs to be sync()ed before database page pPg->pgno 
+  ** can be written to. The caller has already promised not to write to it.
+  */
+  if( (pPg->flags&PGHDR_NEED_SYNC) && !isCommit ){
+    needSyncPgno = pPg->pgno;
+    assert( pPager->journalMode==PAGER_JOURNALMODE_OFF ||
+            pageInJournal(pPager, pPg) || pPg->pgno>pPager->dbOrigSize );
+    assert( pPg->flags&PGHDR_DIRTY );
+  }
+
+  /* If the cache contains a page with page-number pgno, remove it
+  ** from its hash chain. Also, if the PGHDR_NEED_SYNC flag was set for 
+  ** page pgno before the 'move' operation, it needs to be retained 
+  ** for the page moved there.
+  */
+  pPg->flags &= ~PGHDR_NEED_SYNC;
+  pPgOld = sqlite3PagerLookup(pPager, pgno);
+  assert( !pPgOld || pPgOld->nRef==1 || CORRUPT_DB );
+  if( pPgOld ){
+    if( NEVER(pPgOld->nRef>1) ){
+      sqlite3PagerUnrefNotNull(pPgOld);
+      return SQLITE_CORRUPT_BKPT;
+    }
+    pPg->flags |= (pPgOld->flags&PGHDR_NEED_SYNC);
+    if( pPager->tempFile ){
+      /* Do not discard pages from an in-memory database since we might
+      ** need to rollback later.  Just move the page out of the way. */
+      sqlite3PcacheMove(pPgOld, pPager->dbSize+1);
+    }else{
+      sqlite3PcacheDrop(pPgOld);
+    }
+  }
+
+  origPgno = pPg->pgno;
+  sqlite3PcacheMove(pPg, pgno);
+  sqlite3PcacheMakeDirty(pPg);
+
+  /* For an in-memory database, make sure the original page continues
+  ** to exist, in case the transaction needs to roll back.  Use pPgOld
+  ** as the original page since it has already been allocated.
+  */
+  if( pPager->tempFile && pPgOld ){
+    sqlite3PcacheMove(pPgOld, origPgno);
+    sqlite3PagerUnrefNotNull(pPgOld);
+  }
+
+  if( needSyncPgno ){
+    /* If needSyncPgno is non-zero, then the journal file needs to be 
+    ** sync()ed before any data is written to database file page needSyncPgno.
+    ** Currently, no such page exists in the page-cache and the 
+    ** "is journaled" bitvec flag has been set. This needs to be remedied by
+    ** loading the page into the pager-cache and setting the PGHDR_NEED_SYNC
+    ** flag.
+    **
+    ** If the attempt to load the page into the page-cache fails, (due
+    ** to a malloc() or IO failure), clear the bit in the pInJournal[]
+    ** array. Otherwise, if the page is loaded and written again in
+    ** this transaction, it may be written to the database file before
+    ** it is synced into the journal file. This way, it may end up in
+    ** the journal file twice, but that is not a problem.
+    */
+    PgHdr *pPgHdr;
+    rc = sqlite3PagerGet(pPager, needSyncPgno, &pPgHdr, 0);
+    if( rc!=SQLITE_OK ){
+      if( needSyncPgno<=pPager->dbOrigSize ){
+        assert( pPager->pTmpSpace!=0 );
+        sqlite3BitvecClear(pPager->pInJournal, needSyncPgno, pPager->pTmpSpace);
+      }
+      return rc;
+    }
+    pPgHdr->flags |= PGHDR_NEED_SYNC;
+    sqlite3PcacheMakeDirty(pPgHdr);
+    sqlite3PagerUnrefNotNull(pPgHdr);
+  }
+
+  return SQLITE_OK;
+}
+#endif
+
+/*
+** The page handle passed as the first argument refers to a dirty page 
+** with a page number other than iNew. This function changes the page's 
+** page number to iNew and sets the value of the PgHdr.flags field to 
+** the value passed as the third parameter.
+*/
+void sqlite3PagerRekey(DbPage *pPg, Pgno iNew, u16 flags){
+  assert( pPg->pgno!=iNew );
+  pPg->flags = flags;
+  sqlite3PcacheMove(pPg, iNew);
+}
+
+/*
+** Return a pointer to the data for the specified page.
+*/
+void *sqlite3PagerGetData(DbPage *pPg){
+  assert( pPg->nRef>0 || pPg->pPager->memDb );
+  return pPg->pData;
+}
+
+/*
+** Return a pointer to the Pager.nExtra bytes of "extra" space 
+** allocated along with the specified page.
+*/
+void *sqlite3PagerGetExtra(DbPage *pPg){
+  return pPg->pExtra;
+}
+
+/*
+** Get/set the locking-mode for this pager. Parameter eMode must be one
+** of PAGER_LOCKINGMODE_QUERY, PAGER_LOCKINGMODE_NORMAL or 
+** PAGER_LOCKINGMODE_EXCLUSIVE. If the parameter is not _QUERY, then
+** the locking-mode is set to the value specified.
+**
+** The returned value is either PAGER_LOCKINGMODE_NORMAL or
+** PAGER_LOCKINGMODE_EXCLUSIVE, indicating the current (possibly updated)
+** locking-mode.
+*/
+int sqlite3PagerLockingMode(Pager *pPager, int eMode){
+  assert( eMode==PAGER_LOCKINGMODE_QUERY
+            || eMode==PAGER_LOCKINGMODE_NORMAL
+            || eMode==PAGER_LOCKINGMODE_EXCLUSIVE );
+  assert( PAGER_LOCKINGMODE_QUERY<0 );
+  assert( PAGER_LOCKINGMODE_NORMAL>=0 && PAGER_LOCKINGMODE_EXCLUSIVE>=0 );
+  assert( pPager->exclusiveMode || 0==sqlite3WalHeapMemory(pPager->pWal) );
+  if( eMode>=0 && !pPager->tempFile && !sqlite3WalHeapMemory(pPager->pWal) ){
+    pPager->exclusiveMode = (u8)eMode;
+  }
+  return (int)pPager->exclusiveMode;
+}
+
+/*
+** Set the journal-mode for this pager. Parameter eMode must be one of:
+**
+**    PAGER_JOURNALMODE_DELETE
+**    PAGER_JOURNALMODE_TRUNCATE
+**    PAGER_JOURNALMODE_PERSIST
+**    PAGER_JOURNALMODE_OFF
+**    PAGER_JOURNALMODE_MEMORY
+**    PAGER_JOURNALMODE_WAL
+**
+** The journalmode is set to the value specified if the change is allowed.
+** The change may be disallowed for the following reasons:
+**
+**   *  An in-memory database can only have its journal_mode set to _OFF
+**      or _MEMORY.
+**
+**   *  Temporary databases cannot have _WAL journalmode.
+**
+** The returned indicate the current (possibly updated) journal-mode.
+*/
+int sqlite3PagerSetJournalMode(Pager *pPager, int eMode){
+  u8 eOld = pPager->journalMode;    /* Prior journalmode */
+
+  /* The eMode parameter is always valid */
+  assert(      eMode==PAGER_JOURNALMODE_DELETE    /* 0 */
+            || eMode==PAGER_JOURNALMODE_PERSIST   /* 1 */
+            || eMode==PAGER_JOURNALMODE_OFF       /* 2 */
+            || eMode==PAGER_JOURNALMODE_TRUNCATE  /* 3 */
+            || eMode==PAGER_JOURNALMODE_MEMORY    /* 4 */
+            || eMode==PAGER_JOURNALMODE_WAL       /* 5 */ );
+
+  /* This routine is only called from the OP_JournalMode opcode, and
+  ** the logic there will never allow a temporary file to be changed
+  ** to WAL mode.
+  */
+  assert( pPager->tempFile==0 || eMode!=PAGER_JOURNALMODE_WAL );
+
+  /* Do allow the journalmode of an in-memory database to be set to
+  ** anything other than MEMORY or OFF
+  */
+  if( MEMDB ){
+    assert( eOld==PAGER_JOURNALMODE_MEMORY || eOld==PAGER_JOURNALMODE_OFF );
+    if( eMode!=PAGER_JOURNALMODE_MEMORY && eMode!=PAGER_JOURNALMODE_OFF ){
+      eMode = eOld;
+    }
+  }
+
+  if( eMode!=eOld ){
+
+    /* Change the journal mode. */
+    assert( pPager->eState!=PAGER_ERROR );
+    pPager->journalMode = (u8)eMode;
+
+    /* When transistioning from TRUNCATE or PERSIST to any other journal
+    ** mode except WAL, unless the pager is in locking_mode=exclusive mode,
+    ** delete the journal file.
+    */
+    assert( (PAGER_JOURNALMODE_TRUNCATE & 5)==1 );
+    assert( (PAGER_JOURNALMODE_PERSIST & 5)==1 );
+    assert( (PAGER_JOURNALMODE_DELETE & 5)==0 );
+    assert( (PAGER_JOURNALMODE_MEMORY & 5)==4 );
+    assert( (PAGER_JOURNALMODE_OFF & 5)==0 );
+    assert( (PAGER_JOURNALMODE_WAL & 5)==5 );
+
+    assert( isOpen(pPager->fd) || pPager->exclusiveMode );
+    if( !pPager->exclusiveMode && (eOld & 5)==1 && (eMode & 1)==0 ){
+      /* In this case we would like to delete the journal file. If it is
+      ** not possible, then that is not a problem. Deleting the journal file
+      ** here is an optimization only.
+      **
+      ** Before deleting the journal file, obtain a RESERVED lock on the
+      ** database file. This ensures that the journal file is not deleted
+      ** while it is in use by some other client.
+      */
+      sqlite3OsClose(pPager->jfd);
+      if( pPager->eLock>=RESERVED_LOCK ){
+        sqlite3OsDelete(pPager->pVfs, pPager->zJournal, 0);
+      }else{
+        int rc = SQLITE_OK;
+        int state = pPager->eState;
+        assert( state==PAGER_OPEN || state==PAGER_READER );
+        if( state==PAGER_OPEN ){
+          rc = sqlite3PagerSharedLock(pPager);
+        }
+        if( pPager->eState==PAGER_READER ){
+          assert( rc==SQLITE_OK );
+          rc = pagerLockDb(pPager, RESERVED_LOCK);
+        }
+        if( rc==SQLITE_OK ){
+          sqlite3OsDelete(pPager->pVfs, pPager->zJournal, 0);
+        }
+        if( rc==SQLITE_OK && state==PAGER_READER ){
+          pagerUnlockDb(pPager, SHARED_LOCK);
+        }else if( state==PAGER_OPEN ){
+          pager_unlock(pPager);
+        }
+        assert( state==pPager->eState );
+      }
+    }else if( eMode==PAGER_JOURNALMODE_OFF ){
+      sqlite3OsClose(pPager->jfd);
+    }
+  }
+
+  /* Return the new journal mode */
+  return (int)pPager->journalMode;
+}
+
+/*
+** Return the current journal mode.
+*/
+int sqlite3PagerGetJournalMode(Pager *pPager){
+  return (int)pPager->journalMode;
+}
+
+/*
+** Return TRUE if the pager is in a state where it is OK to change the
+** journalmode.  Journalmode changes can only happen when the database
+** is unmodified.
+*/
+int sqlite3PagerOkToChangeJournalMode(Pager *pPager){
+  assert( assert_pager_state(pPager) );
+  if( pPager->eState>=PAGER_WRITER_CACHEMOD ) return 0;
+  if( NEVER(isOpen(pPager->jfd) && pPager->journalOff>0) ) return 0;
+  return 1;
+}
+
+/*
+** Get/set the size-limit used for persistent journal files.
+**
+** Setting the size limit to -1 means no limit is enforced.
+** An attempt to set a limit smaller than -1 is a no-op.
+*/
+i64 sqlite3PagerJournalSizeLimit(Pager *pPager, i64 iLimit){
+  if( iLimit>=-1 ){
+    pPager->journalSizeLimit = iLimit;
+    sqlite3WalLimit(pPager->pWal, iLimit);
+  }
+  return pPager->journalSizeLimit;
+}
+
+/*
+** Return a pointer to the pPager->pBackup variable. The backup module
+** in backup.c maintains the content of this variable. This module
+** uses it opaquely as an argument to sqlite3BackupRestart() and
+** sqlite3BackupUpdate() only.
+*/
+sqlite3_backup **sqlite3PagerBackupPtr(Pager *pPager){
+  return &pPager->pBackup;
+}
+
+#ifndef SQLITE_OMIT_VACUUM
+/*
+** Unless this is an in-memory or temporary database, clear the pager cache.
+*/
+void sqlite3PagerClearCache(Pager *pPager){
+  assert( MEMDB==0 || pPager->tempFile );
+  if( pPager->tempFile==0 ) pager_reset(pPager);
+}
+#endif
+
+
+#ifndef SQLITE_OMIT_WAL
+/*
+** This function is called when the user invokes "PRAGMA wal_checkpoint",
+** "PRAGMA wal_blocking_checkpoint" or calls the sqlite3_wal_checkpoint()
+** or wal_blocking_checkpoint() API functions.
+**
+** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART.
+*/
+int sqlite3PagerCheckpoint(
+  Pager *pPager,                  /* Checkpoint on this pager */
+  sqlite3 *db,                    /* Db handle used to check for interrupts */
+  int eMode,                      /* Type of checkpoint */
+  int *pnLog,                     /* OUT: Final number of frames in log */
+  int *pnCkpt                     /* OUT: Final number of checkpointed frames */
+){
+  int rc = SQLITE_OK;
+  if( pPager->pWal==0 && pPager->journalMode==PAGER_JOURNALMODE_WAL ){
+    /* This only happens when a database file is zero bytes in size opened and
+    ** then "PRAGMA journal_mode=WAL" is run and then sqlite3_wal_checkpoint()
+    ** is invoked without any intervening transactions.  We need to start
+    ** a transaction to initialize pWal.  The PRAGMA table_list statement is
+    ** used for this since it starts transactions on every database file,
+    ** including all ATTACHed databases.  This seems expensive for a single
+    ** sqlite3_wal_checkpoint() call, but it happens very rarely.
+    ** https://sqlite.org/forum/forumpost/fd0f19d229156939
+    */
+    sqlite3_exec(db, "PRAGMA table_list",0,0,0);
+  }
+  if( pPager->pWal ){
+    rc = sqlite3WalCheckpoint(pPager->pWal, db, eMode,
+        (eMode==SQLITE_CHECKPOINT_PASSIVE ? 0 : pPager->xBusyHandler),
+        pPager->pBusyHandlerArg,
+        pPager->walSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace,
+        pnLog, pnCkpt
+    );
+  }
+  return rc;
+}
+
+int sqlite3PagerWalCallback(Pager *pPager){
+  return sqlite3WalCallback(pPager->pWal);
+}
+
+/*
+** Return true if the underlying VFS for the given pager supports the
+** primitives necessary for write-ahead logging.
+*/
+int sqlite3PagerWalSupported(Pager *pPager){
+  const sqlite3_io_methods *pMethods = pPager->fd->pMethods;
+  if( pPager->noLock ) return 0;
+  return pPager->exclusiveMode || (pMethods->iVersion>=2 && pMethods->xShmMap);
+}
+
+/*
+** Attempt to take an exclusive lock on the database file. If a PENDING lock
+** is obtained instead, immediately release it.
+*/
+static int pagerExclusiveLock(Pager *pPager){
+  int rc;                         /* Return code */
+
+  assert( pPager->eLock==SHARED_LOCK || pPager->eLock==EXCLUSIVE_LOCK );
+  rc = pagerLockDb(pPager, EXCLUSIVE_LOCK);
+  if( rc!=SQLITE_OK ){
+    /* If the attempt to grab the exclusive lock failed, release the 
+    ** pending lock that may have been obtained instead.  */
+    pagerUnlockDb(pPager, SHARED_LOCK);
+  }
+
+  return rc;
+}
+
+/*
+** Call sqlite3WalOpen() to open the WAL handle. If the pager is in 
+** exclusive-locking mode when this function is called, take an EXCLUSIVE
+** lock on the database file and use heap-memory to store the wal-index
+** in. Otherwise, use the normal shared-memory.
+*/
+static int pagerOpenWal(Pager *pPager){
+  int rc = SQLITE_OK;
+
+  assert( pPager->pWal==0 && pPager->tempFile==0 );
+  assert( pPager->eLock==SHARED_LOCK || pPager->eLock==EXCLUSIVE_LOCK );
+
+  /* If the pager is already in exclusive-mode, the WAL module will use 
+  ** heap-memory for the wal-index instead of the VFS shared-memory 
+  ** implementation. Take the exclusive lock now, before opening the WAL
+  ** file, to make sure this is safe.
+  */
+  if( pPager->exclusiveMode ){
+    rc = pagerExclusiveLock(pPager);
+  }
+
+  /* Open the connection to the log file. If this operation fails, 
+  ** (e.g. due to malloc() failure), return an error code.
+  */
+  if( rc==SQLITE_OK ){
+    rc = sqlite3WalOpen(pPager->pVfs,
+        pPager->fd, pPager->zWal, pPager->exclusiveMode,
+        pPager->journalSizeLimit, &pPager->pWal
+    );
+  }
+  pagerFixMaplimit(pPager);
+
+  return rc;
+}
+
+
+/*
+** The caller must be holding a SHARED lock on the database file to call
+** this function.
+**
+** If the pager passed as the first argument is open on a real database
+** file (not a temp file or an in-memory database), and the WAL file
+** is not already open, make an attempt to open it now. If successful,
+** return SQLITE_OK. If an error occurs or the VFS used by the pager does 
+** not support the xShmXXX() methods, return an error code. *pbOpen is
+** not modified in either case.
+**
+** If the pager is open on a temp-file (or in-memory database), or if
+** the WAL file is already open, set *pbOpen to 1 and return SQLITE_OK
+** without doing anything.
+*/
+int sqlite3PagerOpenWal(
+  Pager *pPager,                  /* Pager object */
+  int *pbOpen                     /* OUT: Set to true if call is a no-op */
+){
+  int rc = SQLITE_OK;             /* Return code */
+
+  assert( assert_pager_state(pPager) );
+  assert( pPager->eState==PAGER_OPEN   || pbOpen );
+  assert( pPager->eState==PAGER_READER || !pbOpen );
+  assert( pbOpen==0 || *pbOpen==0 );
+  assert( pbOpen!=0 || (!pPager->tempFile && !pPager->pWal) );
+
+  if( !pPager->tempFile && !pPager->pWal ){
+    if( !sqlite3PagerWalSupported(pPager) ) return SQLITE_CANTOPEN;
+
+    /* Close any rollback journal previously open */
+    sqlite3OsClose(pPager->jfd);
+
+    rc = pagerOpenWal(pPager);
+    if( rc==SQLITE_OK ){
+      pPager->journalMode = PAGER_JOURNALMODE_WAL;
+      pPager->eState = PAGER_OPEN;
+    }
+  }else{
+    *pbOpen = 1;
+  }
+
+  return rc;
+}
+
+/*
+** This function is called to close the connection to the log file prior
+** to switching from WAL to rollback mode.
+**
+** Before closing the log file, this function attempts to take an 
+** EXCLUSIVE lock on the database file. If this cannot be obtained, an
+** error (SQLITE_BUSY) is returned and the log connection is not closed.
+** If successful, the EXCLUSIVE lock is not released before returning.
+*/
+int sqlite3PagerCloseWal(Pager *pPager, sqlite3 *db){
+  int rc = SQLITE_OK;
+
+  assert( pPager->journalMode==PAGER_JOURNALMODE_WAL );
+
+  /* If the log file is not already open, but does exist in the file-system,
+  ** it may need to be checkpointed before the connection can switch to
+  ** rollback mode. Open it now so this can happen.
+  */
+  if( !pPager->pWal ){
+    int logexists = 0;
+    rc = pagerLockDb(pPager, SHARED_LOCK);
+    if( rc==SQLITE_OK ){
+      rc = sqlite3OsAccess(
+          pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &logexists
+      );
+    }
+    if( rc==SQLITE_OK && logexists ){
+      rc = pagerOpenWal(pPager);
+    }
+  }
+    
+  /* Checkpoint and close the log. Because an EXCLUSIVE lock is held on
+  ** the database file, the log and log-summary files will be deleted.
+  */
+  if( rc==SQLITE_OK && pPager->pWal ){
+    rc = pagerExclusiveLock(pPager);
+    if( rc==SQLITE_OK ){
+      rc = sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags,
+                           pPager->pageSize, (u8*)pPager->pTmpSpace);
+      pPager->pWal = 0;
+      pagerFixMaplimit(pPager);
+      if( rc && !pPager->exclusiveMode ) pagerUnlockDb(pPager, SHARED_LOCK);
+    }
+  }
+  return rc;
+}
+
+#ifdef SQLITE_ENABLE_SETLK_TIMEOUT
+/*
+** If pager pPager is a wal-mode database not in exclusive locking mode,
+** invoke the sqlite3WalWriteLock() function on the associated Wal object 
+** with the same db and bLock parameters as were passed to this function.
+** Return an SQLite error code if an error occurs, or SQLITE_OK otherwise.
+*/
+int sqlite3PagerWalWriteLock(Pager *pPager, int bLock){
+  int rc = SQLITE_OK;
+  if( pagerUseWal(pPager) && pPager->exclusiveMode==0 ){
+    rc = sqlite3WalWriteLock(pPager->pWal, bLock);
+  }
+  return rc;
+}
+
+/*
+** Set the database handle used by the wal layer to determine if 
+** blocking locks are required.
+*/
+void sqlite3PagerWalDb(Pager *pPager, sqlite3 *db){
+  if( pagerUseWal(pPager) ){
+    sqlite3WalDb(pPager->pWal, db);
+  }
+}
+#endif
+
+#ifdef SQLITE_ENABLE_SNAPSHOT
+/*
+** If this is a WAL database, obtain a snapshot handle for the snapshot
+** currently open. Otherwise, return an error.
+*/
+int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot){
+  int rc = SQLITE_ERROR;
+  if( pPager->pWal ){
+    rc = sqlite3WalSnapshotGet(pPager->pWal, ppSnapshot);
+  }
+  return rc;
+}
+
+/*
+** If this is a WAL database, store a pointer to pSnapshot. Next time a
+** read transaction is opened, attempt to read from the snapshot it 
+** identifies. If this is not a WAL database, return an error.
+*/
+int sqlite3PagerSnapshotOpen(
+  Pager *pPager, 
+  sqlite3_snapshot *pSnapshot
+){
+  int rc = SQLITE_OK;
+  if( pPager->pWal ){
+    sqlite3WalSnapshotOpen(pPager->pWal, pSnapshot);
+  }else{
+    rc = SQLITE_ERROR;
+  }
+  return rc;
+}
+
+/*
+** If this is a WAL database, call sqlite3WalSnapshotRecover(). If this 
+** is not a WAL database, return an error.
+*/
+int sqlite3PagerSnapshotRecover(Pager *pPager){
+  int rc;
+  if( pPager->pWal ){
+    rc = sqlite3WalSnapshotRecover(pPager->pWal);
+  }else{
+    rc = SQLITE_ERROR;
+  }
+  return rc;
+}
+
+/*
+** The caller currently has a read transaction open on the database.
+** If this is not a WAL database, SQLITE_ERROR is returned. Otherwise,
+** this function takes a SHARED lock on the CHECKPOINTER slot and then
+** checks if the snapshot passed as the second argument is still 
+** available. If so, SQLITE_OK is returned.
+**
+** If the snapshot is not available, SQLITE_ERROR is returned. Or, if
+** the CHECKPOINTER lock cannot be obtained, SQLITE_BUSY. If any error
+** occurs (any value other than SQLITE_OK is returned), the CHECKPOINTER
+** lock is released before returning.
+*/
+int sqlite3PagerSnapshotCheck(Pager *pPager, sqlite3_snapshot *pSnapshot){
+  int rc;
+  if( pPager->pWal ){
+    rc = sqlite3WalSnapshotCheck(pPager->pWal, pSnapshot);
+  }else{
+    rc = SQLITE_ERROR;
+  }
+  return rc;
+}
+
+/*
+** Release a lock obtained by an earlier successful call to
+** sqlite3PagerSnapshotCheck().
+*/
+void sqlite3PagerSnapshotUnlock(Pager *pPager){
+  assert( pPager->pWal );
+  sqlite3WalSnapshotUnlock(pPager->pWal);
+}
+
+#endif /* SQLITE_ENABLE_SNAPSHOT */
+#endif /* !SQLITE_OMIT_WAL */
+
+#ifdef SQLITE_ENABLE_ZIPVFS
+/*
+** A read-lock must be held on the pager when this function is called. If
+** the pager is in WAL mode and the WAL file currently contains one or more
+** frames, return the size in bytes of the page images stored within the
+** WAL frames. Otherwise, if this is not a WAL database or the WAL file
+** is empty, return 0.
+*/
+int sqlite3PagerWalFramesize(Pager *pPager){
+  assert( pPager->eState>=PAGER_READER );
+  return sqlite3WalFramesize(pPager->pWal);
+}
+#endif
+
+#endif /* SQLITE_OMIT_DISKIO */