diff options
Diffstat (limited to 'autoconf/tea/win/makefile.vc')
| -rw-r--r-- | autoconf/tea/win/makefile.vc | 430 |
1 files changed, 430 insertions, 0 deletions
diff --git a/autoconf/tea/win/makefile.vc b/autoconf/tea/win/makefile.vc new file mode 100644 index 0000000..da56e81 --- /dev/null +++ b/autoconf/tea/win/makefile.vc @@ -0,0 +1,430 @@ +# makefile.vc -- -*- Makefile -*- +# +# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) +# +# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to +# make it suitable as a general package makefile. Look for the word EDIT +# which marks sections that may need modification. As a minumum you will +# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values +# relevant to your package. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# Copyright (c) 1998-2000 Ajuba Solutions. +# Copyright (c) 2001 ActiveState Corporation. +# Copyright (c) 2001-2002 David Gravereaux. +# Copyright (c) 2003 Pat Thoyts +# +#------------------------------------------------------------------------- +# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $ +#------------------------------------------------------------------------- + +!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) +MSG = ^ +You will need to run vcvars32.bat from Developer Studio, first, to setup^ +the environment. Jump to this line to read the new instructions. +!error $(MSG) +!endif + +#------------------------------------------------------------------------------ +# HOW TO USE this makefile: +# +# 1) It is now necessary to have %MSVCDir% set in the environment. This is +# used as a check to see if vcvars32.bat had been run prior to running +# nmake or during the installation of Microsoft Visual C++, MSVCDir had +# been set globally and the PATH adjusted. Either way is valid. +# +# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin +# directory to setup the proper environment, if needed, for your current +# setup. This is a needed bootstrap requirement and allows the swapping of +# different environments to be easier. +# +# 2) To use the Platform SDK (not expressly needed), run setenv.bat after +# vcvars32.bat according to the instructions for it. This can also turn on +# the 64-bit compiler, if your SDK has it. +# +# 3) Targets are: +# all -- Builds everything. +# <project> -- Builds the project (eg: nmake sample) +# test -- Builds and runs the test suite. +# install -- Installs the built binaries and libraries to $(INSTALLDIR) +# in an appropriate subdirectory. +# clean/realclean/distclean -- varying levels of cleaning. +# +# 4) Macros usable on the commandline: +# INSTALLDIR=<path> +# Sets where to install Tcl from the built binaries. +# C:\Progra~1\Tcl is assumed when not specified. +# +# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none +# Sets special options for the core. The default is for none. +# Any combination of the above may be used (comma separated). +# 'none' will over-ride everything to nothing. +# +# static = Builds a static library of the core instead of a +# dll. The shell will be static (and large), as well. +# msvcrt = Effects the static option only to switch it from +# using libcmt(d) as the C runtime [by default] to +# msvcrt(d). This is useful for static embedding +# support. +# staticpkg = Effects the static option only to switch +# tclshXX.exe to have the dde and reg extension linked +# inside it. +# threads = Turns on full multithreading support. +# thrdalloc = Use the thread allocator (shared global free pool). +# symbols = Adds symbols for step debugging. +# profile = Adds profiling hooks. Map file is assumed. +# loimpact = Adds a flag for how NT treats the heap to keep memory +# in use, low. This is said to impact alloc performance. +# +# STATS=memdbg,compdbg,none +# Sets optional memory and bytecode compiler debugging code added +# to the core. The default is for none. Any combination of the +# above may be used (comma separated). 'none' will over-ride +# everything to nothing. +# +# memdbg = Enables the debugging memory allocator. +# compdbg = Enables byte compilation logging. +# +# MACHINE=(IX86|IA64|ALPHA) +# Set the machine type used for the compiler, linker, and +# resource compiler. This hook is needed to tell the tools +# when alternate platforms are requested. IX86 is the default +# when not specified. +# +# TMP_DIR=<path> +# OUT_DIR=<path> +# Hooks to allow the intermediate and output directories to be +# changed. $(OUT_DIR) is assumed to be +# $(BINROOT)\(Release|Debug) based on if symbols are requested. +# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default. +# +# TESTPAT=<file> +# Reads the tests requested to be run from this file. +# +# CFG_ENCODING=encoding +# name of encoding for configuration information. Defaults +# to cp1252 +# +# 5) Examples: +# +# Basic syntax of calling nmake looks like this: +# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] +# +# Standard (no frills) +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>nmake -f makefile.vc all +# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl +# +# Building for Win64 +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL +# Targeting Windows pre64 RETAIL +# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 +# +#------------------------------------------------------------------------------ +#============================================================================== +############################################################################### +#------------------------------------------------------------------------------ + +!if !exist("makefile.vc") +MSG = ^ +You must run this makefile only from the directory it is in.^ +Please `cd` to its location first. +!error $(MSG) +!endif + +#------------------------------------------------------------------------- +# Project specific information (EDIT) +# +# You should edit this with the name and version of your project. This +# information is used to generate the name of the package library and +# it's install location. +# +# For example, the sample extension is going to build sample04.dll and +# would install it into $(INSTALLDIR)\lib\sample04 +# +# You need to specify the object files that need to be linked into your +# binary here. +# +#------------------------------------------------------------------------- + +PROJECT = sqlite3 +!include "rules.vc" + +# nmakehelp -V <file> <tag> will search the file for tag, skips until a +# number and returns all character until a character not in [0-9.ab] +# is read. + +!if [echo REM = This file is generated from Makefile.vc > versions.vc] +!endif +# get project version from row "AC_INIT([sqlite], [3.x.y])" +!if [echo DOTVERSION = \>> versions.vc] \ + && [nmakehlp -V ..\configure.ac AC_INIT >> versions.vc] +!endif +!include "versions.vc" + +VERSION = $(DOTVERSION:.=) +STUBPREFIX = $(PROJECT)stub + +#------------------------------------------------------------------------- +# Target names and paths ( shouldn't need changing ) +#------------------------------------------------------------------------- + +BINROOT = . +ROOT = .. + +PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +PRJLIBNAME = $(PROJECT).$(EXT) +PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) + +PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) + +### Make sure we use backslash only. +PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) +LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) +BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) +DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) +SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) +INCLUDE_INSTALL_DIR = $(_TCLDIR)\include + +### The following paths CANNOT have spaces in them. +GENERICDIR = $(ROOT)\generic +WINDIR = $(ROOT)\win +LIBDIR = $(ROOT)\library +DOCDIR = $(ROOT)\doc +TOOLSDIR = $(ROOT)\tools +COMPATDIR = $(ROOT)\compat + +### Figure out where the primary source code file(s) is/are. +!if exist("$(ROOT)\..\..\sqlite3.c") && exist("$(ROOT)\..\..\src\tclsqlite.c") +SQL_INCLUDES = -I"$(ROOT)\..\.." +SQLITE_SRCDIR = $(ROOT)\..\.. +TCLSQLITE_SRCDIR = $(ROOT)\..\..\src +DLLOBJS = $(TMP_DIR)\sqlite3.obj $(TMP_DIR)\tclsqlite.obj +!else +TCLSQLITE_SRCDIR = $(ROOT)\generic +DLLOBJS = $(TMP_DIR)\tclsqlite3.obj +!endif + +#--------------------------------------------------------------------- +# Compile flags +#--------------------------------------------------------------------- + +!if !$(DEBUG) +!if $(OPTIMIZING) +### This cranks the optimization level to maximize speed +cdebug = -O2 -Op -Gs +!else +cdebug = +!endif +!else if "$(MACHINE)" == "IA64" +### Warnings are too many, can't support warnings into errors. +cdebug = -Z7 -Od -GZ +!else +cdebug = -Z7 -WX -Od -GZ +!endif + +### Declarations common to all compiler options +cflags = -nologo -c -W3 -D_CRT_SECURE_NO_WARNINGS -YX -Fp$(TMP_DIR)^\ + +!if $(MSVCRT) +!if $(DEBUG) +crt = -MDd +!else +crt = -MD +!endif +!else +!if $(DEBUG) +crt = -MTd +!else +crt = -MT +!endif +!endif + +INCLUDES = $(SQL_INCLUDES) $(TCL_INCLUDES) -I"$(WINDIR)" \ + -I"$(GENERICDIR)" -I"$(ROOT)\.." +BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \ + -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \ + -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1 \ + -DSQLITE_ENABLE_FTS4=1 \ + -DSQLITE_ENABLE_FTS5=1 \ + -DSQLITE_3_SUFFIX_ONLY=1 \ + -DSQLITE_ENABLE_RTREE=1 \ + -DSQLITE_ENABLE_GEOPOLY=1 \ + -DSQLITE_ENABLE_MATH_FUNCTIONS=1 \ + -DSQLITE_ENABLE_DESERIALIZE=1 \ + -DSQLITE_ENABLE_DBPAGE_VTAB=1 \ + -DSQLITE_ENABLE_BYTECODE_VTAB=1 \ + -DSQLITE_ENABLE_DBSTAT_VTAB=1 + +CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1 +TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \ + -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \ + $(OPTDEFINES) + +#--------------------------------------------------------------------- +# Link flags +#--------------------------------------------------------------------- + +!if $(DEBUG) +ldebug = -debug:full -debugtype:cv +!else +ldebug = -release -opt:ref -opt:icf,3 +!endif + +### Declarations common to all linker options +lflags = -nologo -machine:$(MACHINE) $(ldebug) + +!if $(PROFILE) +lflags = $(lflags) -profile +!endif + +!if $(ALIGN98_HACK) && !$(STATIC_BUILD) +### Align sections for PE size savings. +lflags = $(lflags) -opt:nowin98 +!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) +### Align sections for speed in loading by choosing the virtual page size. +lflags = $(lflags) -align:4096 +!endif + +!if $(LOIMPACT) +lflags = $(lflags) -ws:aggressive +!endif + +dlllflags = $(lflags) -dll +conlflags = $(lflags) -subsystem:console +guilflags = $(lflags) -subsystem:windows +baselibs = $(TCLSTUBLIB) + +#--------------------------------------------------------------------- +# TclTest flags +#--------------------------------------------------------------------- + +!IF "$(TESTPAT)" != "" +TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) +!ENDIF + +#--------------------------------------------------------------------- +# Project specific targets (EDIT) +#--------------------------------------------------------------------- + +all: setup $(PROJECT) +$(PROJECT): setup $(PRJLIB) +install: install-binaries install-libraries install-docs + +# Tests need to ensure we load the right dll file we +# have to handle the output differently on Win9x. +# +!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" +test: setup $(PROJECT) + set TCL_LIBRARY=$(ROOT)/library + $(TCLSH) << +load $(PRJLIB:\=/) +cd "$(ROOT)/tests" +set argv "$(TESTFLAGS)" +source all.tcl +<< +!else +test: setup $(PROJECT) + echo Please wait while the test results are collected + set TCL_LIBRARY=$(ROOT)/library + $(TCLSH) << >tests.log +load $(PRJLIB:\=/) +cd "$(ROOT)/tests" +set argv "$(TESTFLAGS)" +source all.tcl +<< + type tests.log | more +!endif + +setup: + @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) + @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) + +$(PRJLIB): $(DLLOBJS) + $(link32) $(dlllflags) -out:$@ $(baselibs) @<< +$** +<< + -@del $*.exp + +$(PRJSTUBLIB): $(PRJSTUBOBJS) + $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) + +#--------------------------------------------------------------------- +# Implicit rules +#--------------------------------------------------------------------- + +$(TMP_DIR)\sqlite3.obj: $(SQLITE_SRCDIR)\sqlite3.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \ + -c $(SQLITE_SRCDIR)\sqlite3.c + +$(TMP_DIR)\tclsqlite.obj: $(TCLSQLITE_SRCDIR)\tclsqlite.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \ + -c $(TCLSQLITE_SRCDIR)\tclsqlite.c + +$(TMP_DIR)\tclsqlite3.obj: $(TCLSQLITE_SRCDIR)\tclsqlite3.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \ + -c $(TCLSQLITE_SRCDIR)\tclsqlite3.c + +{$(WINDIR)}.rc{$(TMP_DIR)}.res: + $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ +!if $(DEBUG) + -d DEBUG \ +!endif +!if $(TCL_THREADS) + -d TCL_THREADS \ +!endif +!if $(STATIC_BUILD) + -d STATIC_BUILD \ +!endif + $< + +.SUFFIXES: +.SUFFIXES:.c .rc + +#--------------------------------------------------------------------- +# Installation. (EDIT) +# +# You may need to modify this section to reflect the final distribution +# of your files and possibly to generate documentation. +# +#--------------------------------------------------------------------- + +install-binaries: + @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' + @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" + @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL + +install-libraries: + @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' + @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" + @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' + @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl" +package ifneeded $(PROJECT) $(DOTVERSION) \ + [list load [file join $$dir $(PRJLIBNAME)] sqlite3] +<< + +install-docs: + @echo Installing documentation files to '$(DOC_INSTALL_DIR)' + @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)" + +#--------------------------------------------------------------------- +# Clean up +#--------------------------------------------------------------------- + +clean: + @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) + @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc + +realclean: clean + @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) + +distclean: realclean + @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe + @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj |