diff options
Diffstat (limited to 'man/systemd-repart.xml')
| -rw-r--r-- | man/systemd-repart.xml | 390 |
1 files changed, 390 insertions, 0 deletions
diff --git a/man/systemd-repart.xml b/man/systemd-repart.xml new file mode 100644 index 0000000..3585cbf --- /dev/null +++ b/man/systemd-repart.xml @@ -0,0 +1,390 @@ +<?xml version='1.0'?> <!--*-nxml-*--> +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" + "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> +<!-- SPDX-License-Identifier: LGPL-2.1-or-later --> + +<refentry id="systemd-repart" conditional='ENABLE_REPART' + xmlns:xi="http://www.w3.org/2001/XInclude"> + + <refentryinfo> + <title>systemd-repart</title> + <productname>systemd</productname> + </refentryinfo> + + <refmeta> + <refentrytitle>systemd-repart</refentrytitle> + <manvolnum>8</manvolnum> + </refmeta> + + <refnamediv> + <refname>systemd-repart</refname> + <refname>systemd-repart.service</refname> + <refpurpose>Automatically grow and add partitions</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <cmdsynopsis> + <command>systemd-repart</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="opt" rep="repeat"><replaceable><optional>BLOCKDEVICE</optional></replaceable></arg> + </cmdsynopsis> + + <para><filename>systemd-repart.service</filename></para> + </refsynopsisdiv> + + <refsect1> + <title>Description</title> + + <para><command>systemd-repart</command> grows and adds partitions to a partition table, based on the + configuration files described in + <citerefentry><refentrytitle>repart.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>. + </para> + + <para>If invoked with no arguments, it operates on the block device backing the root file system + partition of the running OS, thus growing and adding partitions of the booted OS image itself. If + <varname>--image=</varname> is used it will operate on the specified image file. When called in the + initrd it operates on the block device backing <filename>/sysroot/</filename> instead, i.e. on the block + device the system will soon transition into. The <filename>systemd-repart.service</filename> service is + generally run at boot in the initrd, in order to augment the partition table of the OS before its + partitions are mounted. <command>systemd-repart</command> (mostly) operates in a purely incremental mode: + it only grows existing and adds new partitions; it does not shrink, delete or move existing partitions. + The service is intended to be run on every boot, but when it detects that the partition table already + matches the installed <filename>repart.d/*.conf</filename> configuration files, it executes no + operation.</para> + + <para><command>systemd-repart</command> is intended to be used when deploying OS images, to automatically + adjust them to the system they are running on, during first boot. This way the deployed image can be + minimal in size and may be augmented automatically at boot when needed, taking possession of disk space + available but not yet used. Specifically the following use cases are among those covered:</para> + + <itemizedlist> + <listitem><para>The root partition may be grown to cover the whole available disk space.</para></listitem> + <listitem><para>A <filename>/home/</filename>, swap or <filename>/srv/</filename> partition can be + added.</para></listitem> + <listitem><para>A second (or third, …) root partition may be added, to cover A/B style setups + where a second version of the root file system is alternatingly used for implementing update + schemes. The deployed image would carry only a single partition ("A") but on first boot a second + partition ("B") for this purpose is automatically created.</para></listitem> + </itemizedlist> + + <para>The algorithm executed by <command>systemd-repart</command> is roughly as follows:</para> + + <orderedlist> + <listitem><para>The <filename>repart.d/*.conf</filename> configuration files are loaded and parsed, + and ordered by filename (without the directory prefix). For each configuration file, + drop-in files are looked for in directories with same name as the configuration file + with a suffix ".d" added.</para></listitem> + + <listitem><para>The partition table already existing on the block device is loaded and + parsed.</para></listitem> + + <listitem><para>The existing partitions in the partition table are matched up with the + <filename>repart.d/*.conf</filename> files by GPT partition type UUID. The first existing partition + of a specific type is assigned the first configuration file declaring the same type. The second + existing partition of a specific type is then assigned the second configuration file declaring the same + type, and so on. After this iterative assigning is complete any left-over existing partitions that have + no matching configuration file are considered "foreign" and left as they are. And any configuration + files for which no partition currently exists are understood as a request to create such a + partition.</para></listitem> + + <listitem><para>Taking the size constraints and weights declared in the configuration files into + account, all partitions that shall be created are now allocated to the disk, taking up all free space, + always respecting the size and padding requests. Similarly, existing partitions that should be grown + are grown. New partitions are always appended to the end of the partition table, taking the first + partition table slot whose index is greater than the indexes of all existing partitions. Partition + table slots are never reordered and thus partition numbers are ensured to remain stable. Note that this + allocation happens in memory only, the partition table on disk is not updated yet.</para></listitem> + + <listitem><para>All existing partitions for which configuration files exist and which currently have no + GPT partition label set will be assigned a label, either explicitly configured in the configuration or + — if that's missing — derived automatically from the partition type. The same is done for all + partitions that are newly created. These assignments are done in memory only, too, the disk is not + updated yet.</para></listitem> + + <listitem><para>Similarly, all existing partitions for which configuration files exist and which + currently have an all-zero identifying UUID will be assigned a new UUID. This UUID is cryptographically + hashed from a common seed value together with the partition type UUID (and a counter in case multiple + partitions of the same type are defined), see below. The same is done for all partitions that are + created anew. These assignments are done in memory only, too, the disk is not updated yet. + </para></listitem> + + <listitem><para>Similarly, if the disk's volume UUID is all zeroes it is also initialized, also + cryptographically hashed from the same common seed value. This is done in memory only too. + </para></listitem> + + <listitem><para>The disk space assigned to new partitions (i.e. what was previously free space) is now + erased. Specifically, all file system signatures are removed, and if the device supports it, the + <constant>BLKDISCARD</constant> I/O control command is issued to inform the hardware that the space is + now empty. In addition any "padding" between partitions and at the end of the device is similarly + erased.</para></listitem> + + <listitem><para>The new partition table is finally written to disk. The kernel is asked to reread the + partition table.</para></listitem> + </orderedlist> + + <para>As exception to the normally strictly incremental operation, when called in a special "factory + reset" mode, <command>systemd-repart</command> may also be used to erase existing partitions to + reset an installation back to vendor defaults. This mode of operation is used when either the + <option>--factory-reset=yes</option> switch is passed on the tool's command line, or the + <option>systemd.factory_reset=yes</option> option specified on the kernel command line, or the + <varname>FactoryReset</varname> EFI variable (vendor UUID + <constant>8cf2644b-4b0b-428f-9387-6d876050dc67</constant>) is set to "yes". It alters the algorithm above + slightly: between the 3rd and the 4th step above any partition marked explicitly via the + <varname>FactoryReset=</varname> boolean is deleted, and the algorithm restarted, thus immediately + re-creating these partitions anew empty.</para> + + <para>Note that <command>systemd-repart</command> only changes partition tables, it does not create or + resize any file systems within these partitions. A separate mechanism should be used for that, for + example + <citerefentry><refentrytitle>systemd-growfs</refentrytitle><manvolnum>8</manvolnum></citerefentry> and + <command>systemd-makefs</command>.</para> + + <para>The UUIDs identifying the new partitions created (or assigned to existing partitions that have no + UUID yet), as well as the disk as a whole are hashed cryptographically from a common seed value. This + seed value is usually the + <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> of the + system, so that the machine ID reproducibly determines the UUIDs assigned to all partitions. If the + machine ID cannot be read (or the user passes <option>--seed=random</option>, see below) the seed is + generated randomly instead, so that the partition UUIDs are also effectively random. The seed value may + also be set explicitly, formatted as UUID via the <option>--seed=</option> option. By hashing these UUIDs + from a common seed images prepared with this tool become reproducible and the result of the algorithm + above deterministic.</para> + + <para>The positional argument should specify the block device to operate on. Instead of a block device + node path a regular file may be specified too, in which case the command operates on it like it would if + a loopback block device node was specified with the file attached. If <option>--empty=create</option> is + specified the specified path is created as regular file, which is useful for generating disk images from + scratch.</para> + </refsect1> + + <refsect1> + <title>Options</title> + + <para>The following options are understood:</para> + + <variablelist> + <varlistentry> + <term><option>--dry-run=</option></term> + <listitem><para>Takes a boolean. If this switch is not specified <option>--dry-run=yes</option> is + the implied default. Controls whether <filename>systemd-repart</filename> executes the requested + re-partition operations or whether it should only show what it would do. Unless + <option>--dry-run=no</option> is specified <filename>systemd-repart</filename> will not actually + touch the device's partition table.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--empty=</option></term> + <listitem><para>Takes one of <literal>refuse</literal>, <literal>allow</literal>, + <literal>require</literal>, <literal>force</literal> or <literal>create</literal>. Controls how to + operate on block devices that are entirely empty, i.e. carry no partition table/disk label yet. If + this switch is not specified the implied default is <literal>refuse</literal>.</para> + + <para>If <literal>refuse</literal> <command>systemd-repart</command> requires that the block device + it shall operate on already carries a partition table and refuses operation if none is found. If + <literal>allow</literal> the command will extend an existing partition table or create a new one if + none exists. If <literal>require</literal> the command will create a new partition table if none + exists so far, and refuse operation if one already exists. If <literal>force</literal> it will create + a fresh partition table unconditionally, erasing the disk fully in effect. If + <literal>force</literal> no existing partitions will be taken into account or survive the + operation. Hence: use with care, this is a great way to lose all your data. If + <literal>create</literal> a new loopback file is create under the path passed via the device node + parameter, of the size indicated with <option>--size=</option>, see below.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--discard=</option></term> + + <listitem><para>Takes a boolean. If this switch is not specified <option>--discard=yes</option> is + the implied default. Controls whether to issue the <constant>BLKDISCARD</constant> I/O control + command on the space taken up by any added partitions or on the space in between them. Usually, it's + a good idea to issue this request since it tells the underlying hardware that the covered blocks + shall be considered empty, improving performance. If operating on a regular file instead of a block + device node, a sparse file is generated.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--size=</option></term> + + <listitem><para>Takes a size in bytes, using the usual K, M, G, T suffixes, or the special value + <literal>auto</literal>. If used the specified device node path must refer to a regular file, which + is then grown to the specified size if smaller, before any change is made to the partition table. If + specified as <literal>auto</literal> the minimal size for the disk image is automatically determined + (i.e. the minimal sizes of all partitions are summed up, taking space for additional metadata into + account). This switch is not supported if the specified node is a block device. This switch has no + effect if the file is already as large as the specified size or larger. The specified size is + implicitly rounded up to multiples of 4096. When used with <option>--empty=create</option> this + specifies the initial size of the loopback file to create.</para> + + <para>The <option>--size=auto</option> option takes the sizes of pre-existing partitions into + account. However, it does not accommodate for partition tables that are not tightly packed: the + configured partitions might still not fit into the backing device if empty space exists between + pre-existing partitions (or before the first partition) that cannot be fully filled by partitions to + grow or create.</para> + + <para>Also note that the automatic size determination does not take files or directories specified + with <option>CopyFiles=</option> into account: operation might fail if the specified files or + directories require more disk space then the configured per-partition minimal size + limit.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--factory-reset=</option></term> + + <listitem><para>Takes boolean. If this switch is not specified <option>--factory=reset=no</option> is + the implied default. Controls whether to operate in "factory reset" mode, see above. If set to true + this will remove all existing partitions marked with <varname>FactoryReset=</varname> set to yes + early while executing the re-partitioning algorithm. Use with care, this is a great way to lose all + your data. Note that partition files need to explicitly turn <varname>FactoryReset=</varname> on, as + the option defaults to off. If no partitions are marked for factory reset this switch has no + effect. Note that there are two other methods to request factory reset operation: via the kernel + command line and via an EFI variable, see above.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--can-factory-reset</option></term> + + <listitem><para>If this switch is specified the disk is not re-partitioned. Instead it is determined + if any existing partitions are marked with <varname>FactoryReset=</varname>. If there are the tool + will exit with exit status zero, otherwise non-zero. This switch may be used to quickly determine + whether the running system supports a factory reset mechanism built on + <command>systemd-repart</command>.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--root=</option></term> + + <listitem><para>Takes a path to a directory to use as root file system when searching for + <filename>repart.d/*.conf</filename> files, for the machine ID file to use as seed and for the + <varname>CopyFiles=</varname> and <varname>CopyBlocks=</varname> source files and directories. By + default when invoked on the regular system this defaults to the host's root file system + <filename>/</filename>. If invoked from the initrd this defaults to <filename>/sysroot/</filename>, + so that the tool operates on the configuration and machine ID stored in the root file system later + transitioned into itself.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--image=</option></term> + + <listitem><para>Takes a path to a disk image file or device to mount and use in a similar fashion to + <option>--root=</option>, see above.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--seed=</option></term> + + <listitem><para>Takes a UUID as argument or the special value <constant>random</constant>. If a UUID + is specified the UUIDs to assign to partitions and the partition table itself are derived via + cryptographic hashing from it. If not specified it is attempted to read the machine ID from the host + (or more precisely, the root directory configured via <option>--root=</option>) and use it as seed + instead, falling back to a randomized seed otherwise. Use <option>--seed=random</option> to force a + randomized seed. Explicitly specifying the seed may be used to generated strictly reproducible + partition tables.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--pretty=</option></term> + + <listitem><para>Takes a boolean argument. If this switch is not specified, it defaults to on when + called from an interactive terminal and off otherwise. Controls whether to show a user friendly table + and graphic illustrating the changes applied.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--definitions=</option></term> + + <listitem><para>Takes a file system path. If specified the <filename>*.conf</filename> files are read + from the specified directory instead of searching in <filename>/usr/lib/repart.d/*.conf</filename>, + <filename>/etc/repart.d/*.conf</filename>, + <filename>/run/repart.d/*.conf</filename>.</para> + + <para>This parameter can be specified multiple times.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--key-file=</option></term> + + <listitem><para>Takes a file system path. Configures the encryption key to use when setting up LUKS2 + volumes configured with the <varname>Encrypt=key-file</varname> setting in partition files. Should + refer to a regular file containing the key, or an <constant>AF_UNIX</constant> stream socket in the + file system. In the latter case a connection is made to it and the key read from it. If this switch + is not specified the empty key (i.e. zero length key) is used. This behaviour is useful for setting + up encrypted partitions during early first boot that receive their user-supplied password only in a + later setup step.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--private-key=</option></term> + + <listitem><para>Takes a file system path. Configures the signing key to use when creating verity + signature partitions with the <varname>Verity=signature</varname> setting in partition files. + </para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--certificate=</option></term> + + <listitem><para>Takes a file system path. Configures the PEM encoded X.509 certificate to use when + creating verity signature partitions with the <varname>Verity=signature</varname> setting in + partition files.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--tpm2-device=</option></term> + <term><option>--tpm2-pcrs=</option></term> + + <listitem><para>Configures the TPM2 device and list of PCRs to use for LUKS2 volumes configured with + the <varname>Encrypt=tpm2</varname> option. These options take the same parameters as the identically + named options to + <citerefentry><refentrytitle>systemd-cryptenroll</refentrytitle><manvolnum>1</manvolnum></citerefentry> + and have the same effect on partitions where TPM2 enrollment is requested.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--tpm2-public-key=</option><arg>PATH</arg></term> + <term><option>--tpm2-public-key-pcrs=</option><arg rep="repeat">PCR</arg></term> + + <listitem><para>Configures a TPM2 signed PCR policy to bind encryption to. See + <citerefentry><refentrytitle>systemd-cryptenroll</refentrytitle><manvolnum>1</manvolnum></citerefentry> + for details on these two options.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--split=</option><arg>BOOL</arg></term> + + <listitem><para>Enables generation of split artifacts from partitions configured with + <varname>SplitName=</varname>. If enabled, for each partition with <varname>SplitName=</varname> set, + a separate output file containing just the contents of that partition is generated. The output + filename consists of the loopback filename suffixed with the name configured with + <varname>SplitName=</varname>. If the loopback filename ends with <literal>.raw</literal>, the suffix + is inserted before the <literal>.raw</literal> extension instead.</para> + + <para>Note that <option>--split</option> is independent from <option>--dry-run</option>. Even if + <option>--dry-run</option> is enabled, split artifacts will still be generated from an existing image + if <option>--split</option> is enabled.</para></listitem> + </varlistentry> + + <xi:include href="standard-options.xml" xpointer="help" /> + <xi:include href="standard-options.xml" xpointer="version" /> + <xi:include href="standard-options.xml" xpointer="no-pager" /> + <xi:include href="standard-options.xml" xpointer="no-legend" /> + <xi:include href="standard-options.xml" xpointer="json" /> + </variablelist> + </refsect1> + + <refsect1> + <title>Exit status</title> + + <para>On success, 0 is returned, a non-zero failure code otherwise.</para> + </refsect1> + + <refsect1> + <title>See Also</title> + <para> + <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry><refentrytitle>repart.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd-cryptenroll</refentrytitle><manvolnum>1</manvolnum></citerefentry> + </para> + </refsect1> + +</refentry> |