summaryrefslogtreecommitdiffstats
path: root/doc/tarlz.texi
diff options
context:
space:
mode:
Diffstat (limited to 'doc/tarlz.texi')
-rw-r--r--doc/tarlz.texi1338
1 files changed, 1338 insertions, 0 deletions
diff --git a/doc/tarlz.texi b/doc/tarlz.texi
new file mode 100644
index 0000000..5bdd2af
--- /dev/null
+++ b/doc/tarlz.texi
@@ -0,0 +1,1338 @@
+\input texinfo @c -*-texinfo-*-
+@c %**start of header
+@setfilename tarlz.info
+@documentencoding ISO-8859-15
+@settitle Tarlz Manual
+@finalout
+@c %**end of header
+
+@set UPDATED 23 September 2022
+@set VERSION 0.23
+
+@dircategory Archiving
+@direntry
+* Tarlz: (tarlz). Archiver with multimember lzip compression
+@end direntry
+
+
+@ifnothtml
+@titlepage
+@title Tarlz
+@subtitle Archiver with multimember lzip compression
+@subtitle for Tarlz version @value{VERSION}, @value{UPDATED}
+@author by Antonio Diaz Diaz
+
+@page
+@vskip 0pt plus 1filll
+@end titlepage
+
+@contents
+@end ifnothtml
+
+@ifnottex
+@node Top
+@top
+
+This manual is for Tarlz (version @value{VERSION}, @value{UPDATED}).
+
+@menu
+* Introduction:: Purpose and features of tarlz
+* Invoking tarlz:: Command line interface
+* Portable character set:: POSIX portable filename character set
+* File format:: Detailed format of the compressed archive
+* Amendments to pax format:: The reasons for the differences with pax
+* Program design:: Internal structure of tarlz
+* Multi-threaded decoding:: Limitations of parallel tar decoding
+* Minimum archive sizes:: Sizes required for full multi-threaded speed
+* Examples:: A small tutorial with examples
+* Problems:: Reporting bugs
+* Concept index:: Index of concepts
+@end menu
+
+@sp 1
+Copyright @copyright{} 2013-2022 Antonio Diaz Diaz.
+
+This manual is free documentation: you have unlimited permission to copy,
+distribute, and modify it.
+@end ifnottex
+
+
+@node Introduction
+@chapter Introduction
+@cindex introduction
+
+@uref{http://www.nongnu.org/lzip/tarlz.html,,Tarlz} is a massively parallel
+(multi-threaded) combined implementation of the tar archiver and the
+@uref{http://www.nongnu.org/lzip/lzip.html,,lzip} compressor. Tarlz uses the
+compression library @uref{http://www.nongnu.org/lzip/lzlib.html,,lzlib}.
+
+Tarlz creates tar archives using a simplified and safer variant of the POSIX
+pax format compressed in lzip format, keeping the alignment between tar
+members and lzip members. The resulting multimember tar.lz archive is fully
+backward compatible with standard tar tools like GNU tar, which treat it
+like any other tar.lz archive. Tarlz can append files to the end of such
+compressed archives.
+
+Keeping the alignment between tar members and lzip members has two
+advantages. It adds an indexed lzip layer on top of the tar archive, making
+it possible to decode the archive safely in parallel. It also minimizes the
+amount of data lost in case of corruption. Compressing a tar archive with
+plzip may even double the amount of files lost for each lzip member damaged
+because it does not keep the members aligned.
+
+Tarlz can create tar archives with five levels of compression granularity:
+per file (---no-solid), per block (---bsolid, default), per directory
+(---dsolid), appendable solid (---asolid), and solid (---solid). It can also
+create uncompressed tar archives.
+
+@noindent
+Of course, compressing each file (or each directory) individually can't
+achieve a compression ratio as high as compressing solidly the whole tar
+archive, but it has the following advantages:
+
+@itemize @bullet
+@item
+The resulting multimember tar.lz archive can be decompressed in
+parallel, multiplying the decompression speed.
+
+@item
+New members can be appended to the archive (by removing the
+end-of-archive member), and unwanted members can be deleted from the
+archive. Just like an uncompressed tar archive.
+
+@item
+It is a safe POSIX-style backup format. In case of corruption, tarlz
+can extract all the undamaged members from the tar.lz archive,
+skipping over the damaged members, just like the standard
+(uncompressed) tar. Moreover, the option @samp{--keep-damaged} can be used
+to recover as much data as possible from each damaged member, and
+lziprecover can be used to recover some of the damaged members.
+
+@item
+A multimember tar.lz archive is usually smaller than the corresponding
+solidly compressed tar.gz archive, except when individually
+compressing files smaller than about @w{32 KiB}.
+@end itemize
+
+Tarlz protects the extended records with a Cyclic Redundancy Check (CRC) in
+a way compatible with standard tar tools. @xref{crc32}.
+
+Tarlz does not understand other tar formats like @samp{gnu}, @samp{oldgnu},
+@samp{star} or @samp{v7}. The command
+@w{@samp{tarlz -tf archive.tar.lz > /dev/null}} can be used to verify that
+the format of the archive is compatible with tarlz.
+
+
+@node Invoking tarlz
+@chapter Invoking tarlz
+@cindex invoking
+@cindex options
+@cindex usage
+@cindex version
+
+The format for running tarlz is:
+
+@example
+tarlz @var{operation} [@var{options}] [@var{files}]
+@end example
+
+@noindent
+All operations except @samp{--concatenate} and @samp{--compress} operate on
+whole trees if any @var{file} is a directory. All operations except
+@samp{--compress} overwrite output files without warning. If no archive is
+specified, tarlz tries to read it from standard input or write it to
+standard output. Tarlz refuses to read archive data from a terminal or write
+archive data to a terminal. Tarlz detects when the archive being created or
+enlarged is among the files to be archived, appended, or concatenated, and
+skips it.
+
+Tarlz does not use absolute file names nor file names above the current
+working directory (perhaps changed by option @samp{-C}). On archive creation
+or appending tarlz archives the files specified, but removes from member
+names any leading and trailing slashes and any file name prefixes containing
+a @samp{..} component. On extraction, leading and trailing slashes are also
+removed from member names, and archive members containing a @samp{..}
+component in the file name are skipped. Tarlz does not follow symbolic links
+during extraction; not even symbolic links replacing intermediate
+directories.
+
+On extraction and listing, tarlz removes leading @samp{./} strings from
+member names in the archive or given in the command line, so that
+@w{@samp{tarlz -xf foo ./bar baz}} extracts members @samp{bar} and
+@samp{./baz} from archive @samp{foo}.
+
+If several compression levels or @samp{--*solid} options are given, the last
+setting is used. For example @w{@samp{-9 --solid --uncompressed -1}} is
+equivalent to @w{@samp{-1 --solid}}.
+
+tarlz supports the following operations:
+
+@table @code
+@item --help
+Print an informative help message describing the options and exit.
+
+@item -V
+@itemx --version
+Print the version number of tarlz on the standard output and exit.
+This version number should be included in all bug reports.
+
+@item -A
+@itemx --concatenate
+Append one or more archives to the end of an archive. If no archive is
+specified with the option @samp{-f}, the input archives are concatenated to
+standard output. All the archives involved must be regular (seekable) files,
+and must be either all compressed or all uncompressed. Compressed and
+uncompressed archives can't be mixed. Compressed archives must be
+multimember lzip files with the two end-of-archive blocks plus any zero
+padding contained in the last lzip member of each archive. The intermediate
+end-of-archive blocks are removed as each new archive is concatenated. If
+the archive is uncompressed, tarlz parses tar headers until it finds the
+end-of-archive blocks. Exit with status 0 without modifying the archive if
+no @var{files} have been specified.
+
+Concatenating archives containing files in common results in two or more tar
+members with the same name in the resulting archive, which may produce
+nondeterministic behavior during multi-threaded extraction.
+@xref{mt-extraction}.
+
+@item -c
+@itemx --create
+Create a new archive from @var{files}.
+
+@item -d
+@itemx --diff
+Compare and report differences between archive and file system. For each tar
+member in the archive, verify that the corresponding file in the file system
+exists and is of the same type (regular file, directory, etc). Report on
+standard output the differences found in type, mode (permissions), owner and
+group IDs, modification time, file size, file contents (of regular files),
+target (of symlinks) and device number (of block/character special files).
+
+As tarlz removes leading slashes from member names, the option @samp{-C} may
+be used in combination with @samp{--diff} when absolute file names were used
+on archive creation: @w{@samp{tarlz -C / -d}}. Alternatively, tarlz may be
+run from the root directory to perform the comparison.
+
+@item --delete
+Delete files and directories from an archive in place. It currently can
+delete only from uncompressed archives and from archives with files
+compressed individually (@samp{--no-solid} archives). Note that files of
+about @samp{--data-size} or larger are compressed individually even if
+@samp{--bsolid} is used, and can therefore be deleted. Tarlz takes care to
+not delete a tar member unless it is possible to do so. For example it won't
+try to delete a tar member that is not compressed individually. Even in the
+case of finding a corrupt member after having deleted some member(s), tarlz
+stops and copies the rest of the file as soon as corruption is found,
+leaving it just as corrupt as it was, but not worse.
+
+To delete a directory without deleting the files under it, use
+@w{@samp{tarlz --delete -f foo --exclude='dir/*' dir}}. Deleting in place
+may be dangerous. A corrupt archive, a power cut, or an I/O error may cause
+data loss.
+
+@item -r
+@itemx --append
+Append files to the end of an archive. The archive must be a regular
+(seekable) file either compressed or uncompressed. Compressed members can't
+be appended to an uncompressed archive, nor vice versa. If the archive is
+compressed, it must be a multimember lzip file with the two end-of-archive
+blocks plus any zero padding contained in the last lzip member of the
+archive. It is possible to append files to an archive with a different
+compression granularity. Appending works as follows; first the
+end-of-archive blocks are removed, then the new members are appended, and
+finally two new end-of-archive blocks are appended to the archive. If the
+archive is uncompressed, tarlz parses and skips tar headers until it finds
+the end-of-archive blocks. Exit with status 0 without modifying the archive
+if no @var{files} have been specified.
+
+Appending files already present in the archive results in two or more tar
+members with the same name, which may produce nondeterministic behavior
+during multi-threaded extraction. @xref{mt-extraction}.
+
+@item -t
+@itemx --list
+List the contents of an archive. If @var{files} are given, list only the
+@var{files} given.
+
+@item -x
+@itemx --extract
+Extract files from an archive. If @var{files} are given, extract only the
+@var{files} given. Else extract all the files in the archive. To extract a
+directory without extracting the files under it, use
+@w{@samp{tarlz -xf foo --exclude='dir/*' dir}}. Tarlz removes files and
+empty directories unconditionally before extracting over them. Other than
+that, it will not make any special effort to extract a file over an
+incompatible type of file. For example, extracting a file over a non-empty
+directory will usually fail.
+
+@item -z
+@itemx --compress
+Compress existing POSIX tar archives aligning the lzip members to the tar
+members with choice of granularity (---bsolid by default, ---dsolid works
+like ---asolid). The input archives are kept unchanged. Existing compressed
+archives are not overwritten. A hyphen @samp{-} used as the name of an input
+archive reads from standard input and writes to standard output (unless the
+option @samp{--output} is used). Tarlz can be used as compressor for GNU tar
+using a command like @w{@samp{tar -c -Hustar foo | tarlz -z -o foo.tar.lz}}.
+Note that tarlz only works reliably on archives without global headers, or
+with global headers whose content can be ignored.
+
+The compression is reversible, including any garbage present after the
+end-of-archive blocks. Tarlz stops parsing after the first end-of-archive
+block is found, and then compresses the rest of the archive. Unless solid
+compression is requested, the end-of-archive blocks are compressed in a lzip
+member separated from the preceding members and from any non-zero garbage
+following the end-of-archive blocks. @samp{--compress} implies plzip
+argument style, not tar style. Each input archive is compressed to a file
+with the extension @samp{.lz} added unless the option @samp{--output} is
+used. When @samp{--output} is used, only one input archive can be specified.
+@samp{-f} can't be used with @samp{--compress}.
+
+@item --check-lib
+Compare the
+@uref{http://www.nongnu.org/lzip/manual/lzlib_manual.html#Library-version,,version of lzlib}
+used to compile tarlz with the version actually being used at run time and
+exit. Report any differences found. Exit with error status 1 if differences
+are found. A mismatch may indicate that lzlib is not correctly installed or
+that a different version of lzlib has been installed after compiling tarlz.
+Exit with error status 2 if LZ_API_VERSION and LZ_version_string don't
+match. @w{@samp{tarlz -v --check-lib}} shows the version of lzlib being used
+and the value of LZ_API_VERSION (if defined).
+@ifnothtml
+@xref{Library version,,,lzlib}.
+@end ifnothtml
+
+@end table
+
+tarlz supports the following
+@uref{http://www.nongnu.org/arg-parser/manual/arg_parser_manual.html#Argument-syntax,,options}:
+@ifnothtml
+@xref{Argument syntax,,,arg_parser}.
+@end ifnothtml
+
+@table @code
+@anchor{--data-size}
+@item -B @var{bytes}
+@itemx --data-size=@var{bytes}
+Set target size of input data blocks for the option @samp{--bsolid}.
+@xref{--bsolid}. Valid values range from @w{8 KiB} to @w{1 GiB}. Default
+value is two times the dictionary size, except for option @samp{-0} where it
+defaults to @w{1 MiB}. @xref{Minimum archive sizes}.
+
+@item -C @var{dir}
+@itemx --directory=@var{dir}
+Change to directory @var{dir}. When creating or appending, the position of
+each @samp{-C} option in the command line is significant; it will change the
+current working directory for the following @var{files} until a new
+@samp{-C} option appears in the command line. When extracting or comparing,
+all the @samp{-C} options are executed in sequence before reading the
+archive. Listing ignores any @samp{-C} options specified. @var{dir} is
+relative to the then current working directory, perhaps changed by a
+previous @samp{-C} option.
+
+Note that a process can only have one current working directory (CWD).
+Therefore multi-threading can't be used to create an archive if a @samp{-C}
+option appears after a relative file name in the command line.
+
+@item -f @var{archive}
+@itemx --file=@var{archive}
+Use archive file @var{archive}. A hyphen @samp{-} used as an @var{archive}
+argument reads from standard input or writes to standard output.
+
+@item -h
+@itemx --dereference
+Follow symbolic links during archive creation, appending or comparison.
+Archive or compare the files they point to instead of the links themselves.
+
+@item -n @var{n}
+@itemx --threads=@var{n}
+Set the number of (de)compression threads, overriding the system's default.
+Valid values range from 0 to "as many as your system can support". A value
+of 0 disables threads entirely. If this option is not used, tarlz tries to
+detect the number of processors in the system and use it as default value.
+@w{@samp{tarlz --help}} shows the system's default value. See the note about
+multi-threaded archive creation in the option @samp{-C} above.
+
+Note that the number of usable threads is limited during compression to
+@w{ceil( uncompressed_size / data_size )} (@pxref{Minimum archive sizes}),
+and during decompression to the number of lzip members in the tar.lz
+archive, which you can find by running @w{@samp{lzip -lv archive.tar.lz}}.
+
+@item -o @var{file}
+@itemx --output=@var{file}
+Write the compressed output to @var{file}. @w{@samp{-o -}} writes the
+compressed output to standard output. Currently @samp{--output} only works
+with @samp{--compress}.
+
+@item -p
+@itemx --preserve-permissions
+On extraction, set file permissions as they appear in the archive. This is
+the default behavior when tarlz is run by the superuser. The default for
+other users is to subtract the umask of the user running tarlz from the
+permissions specified in the archive.
+
+@item -q
+@itemx --quiet
+Quiet operation. Suppress all messages.
+
+@item -v
+@itemx --verbose
+Verbosely list files processed. Further -v's (up to 4) increase the
+verbosity level.
+
+@item -0 .. -9
+Set the compression level for @samp{--create}, @samp{--append}, and
+@samp{--compress}. The default compression level is @samp{-6}. Like lzip,
+tarlz also minimizes the dictionary size of the lzip members it creates,
+reducing the amount of memory required for decompression.
+
+@multitable {Level} {Dictionary size} {Match length limit}
+@item Level @tab Dictionary size @tab Match length limit
+@item -0 @tab 64 KiB @tab 16 bytes
+@item -1 @tab 1 MiB @tab 5 bytes
+@item -2 @tab 1.5 MiB @tab 6 bytes
+@item -3 @tab 2 MiB @tab 8 bytes
+@item -4 @tab 3 MiB @tab 12 bytes
+@item -5 @tab 4 MiB @tab 20 bytes
+@item -6 @tab 8 MiB @tab 36 bytes
+@item -7 @tab 16 MiB @tab 68 bytes
+@item -8 @tab 24 MiB @tab 132 bytes
+@item -9 @tab 32 MiB @tab 273 bytes
+@end multitable
+
+@item --uncompressed
+With @samp{--create}, don't compress the tar archive created. Create an
+uncompressed tar archive instead. With @samp{--append}, don't compress the
+new members appended to the tar archive. Compressed members can't be
+appended to an uncompressed archive, nor vice versa.
+
+@item --asolid
+When creating or appending to a compressed archive, use appendable solid
+compression. All the files being added to the archive are compressed into a
+single lzip member, but the end-of-archive blocks are compressed into a
+separate lzip member. This creates a solidly compressed appendable archive.
+Solid archives can't be created nor decoded in parallel.
+
+@anchor{--bsolid}
+@item --bsolid
+When creating or appending to a compressed archive, use block compression.
+Tar members are compressed together in a lzip member until they approximate
+a target uncompressed size. The size can't be exact because each solidly
+compressed data block must contain an integer number of tar members. Block
+compression is the default because it improves compression ratio for
+archives with many files smaller than the block size. This option allows
+tarlz revert to default behavior if, for example, it is invoked through an
+alias like @w{@samp{tar='tarlz --solid'}}. @xref{--data-size}, to set the
+target block size.
+
+@item --dsolid
+When creating or appending to a compressed archive, compress each file
+specified in the command line separately in its own lzip member, and use
+solid compression for each directory specified in the command line. The
+end-of-archive blocks are compressed into a separate lzip member. This
+creates a compressed appendable archive with a separate lzip member for each
+file or top-level directory specified.
+
+@item --no-solid
+When creating or appending to a compressed archive, compress each file
+separately in its own lzip member. The end-of-archive blocks are compressed
+into a separate lzip member. This creates a compressed appendable archive
+with a lzip member for each file.
+
+@item --solid
+When creating or appending to a compressed archive, use solid compression.
+The files being added to the archive, along with the end-of-archive blocks,
+are compressed into a single lzip member. The resulting archive is not
+appendable. No more files can be later appended to the archive. Solid
+archives can't be created nor decoded in parallel.
+
+@item --anonymous
+Equivalent to @w{@samp{--owner=root --group=root}}.
+
+@item --owner=@var{owner}
+When creating or appending, use @var{owner} for files added to the archive.
+If @var{owner} is not a valid user name, it is decoded as a decimal numeric
+user ID.
+
+@item --group=@var{group}
+When creating or appending, use @var{group} for files added to the archive.
+If @var{group} is not a valid group name, it is decoded as a decimal numeric
+group ID.
+
+@item --exclude=@var{pattern}
+Exclude files matching a shell pattern like @samp{*.o}. A file is considered
+to match if any component of the file name matches. For example, @samp{*.o}
+matches @samp{foo.o}, @samp{foo.o/bar} and @samp{foo/bar.o}. If
+@var{pattern} contains a @samp{/}, it matches a corresponding @samp{/} in
+the file name. For example, @samp{foo/*.o} matches @samp{foo/bar.o}.
+Multiple @samp{--exclude} options can be specified.
+
+@item --ignore-ids
+Make @samp{--diff} ignore differences in owner and group IDs. This option is
+useful when comparing an @samp{--anonymous} archive.
+
+@item --ignore-overflow
+Make @samp{--diff} ignore differences in mtime caused by overflow on 32-bit
+systems with a 32-bit time_t.
+
+@item --keep-damaged
+Don't delete partially extracted files. If a decompression error happens
+while extracting a file, keep the partial data extracted. Use this option to
+recover as much data as possible from each damaged member. It is recommended
+to run tarlz in single-threaded mode (---threads=0) when using this option.
+
+@item --missing-crc
+Exit with error status 2 if the CRC of the extended records is missing. When
+this option is used, tarlz detects any corruption in the extended records
+(only limited by CRC collisions). But note that a corrupt @samp{GNU.crc32}
+keyword, for example @samp{GNU.crc33}, is reported as a missing CRC instead
+of as a corrupt record. This misleading @w{@samp{Missing CRC}} message is
+the consequence of a flaw in the POSIX pax format; i.e., the lack of a
+mandatory check sequence of the extended records. @xref{crc32}.
+
+@item --mtime=@var{date}
+When creating or appending, use @var{date} as the modification time for
+files added to the archive instead of their actual modification times. The
+value of @var{date} may be either @samp{@@} followed by the number of
+seconds since (or before) the epoch, or a date in format
+@w{@samp{[-]YYYY-MM-DD HH:MM:SS}} or @samp{[-]YYYY-MM-DDTHH:MM:SS}, or the
+name of an existing reference file starting with @samp{.} or @samp{/} whose
+modification time is used. The time of day @samp{HH:MM:SS} in the date
+format is optional and defaults to @samp{00:00:00}. The epoch is
+@w{@samp{1970-01-01 00:00:00 UTC}}. Negative seconds or years define a
+modification time before the epoch.
+
+@item --out-slots=@var{n}
+Number of @w{1 MiB} output packets buffered per worker thread during
+multi-threaded creation or appending to compressed archives. Increasing the
+number of packets may increase compression speed if the files being archived
+are larger than @w{64 MiB} compressed, but requires more memory. Valid
+values range from 1 to 1024. The default value is 64.
+
+@item --warn-newer
+During archive creation, warn if any file being archived has a modification
+time newer than the archive creation time. This option may slow archive
+creation somewhat because it makes an extra call to @samp{stat} after
+archiving each file, but it guarantees that file contents were not modified
+during the creation of the archive. Note that the file must be at least one
+second newer than the archive for it to be detected as newer.
+
+@ignore
+@item --permissive
+Allow some violations of the archive format, like consecutive extended
+headers preceding a ustar header, or several records with the same
+keyword appearing in the same block of extended records.
+@end ignore
+
+@end table
+
+Exit status: 0 for a normal exit, 1 for environmental problems
+(file not found, files differ, invalid command line options, I/O errors,
+etc), 2 to indicate a corrupt or invalid input file, 3 for an internal
+consistency error (e.g., bug) which caused tarlz to panic.
+
+
+@node Portable character set
+@chapter POSIX portable filename character set
+@cindex portable character set
+
+The set of characters from which portable file names are constructed.
+
+@example
+A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
+a b c d e f g h i j k l m n o p q r s t u v w x y z
+0 1 2 3 4 5 6 7 8 9 . _ -
+@end example
+
+The last three characters are the period, underscore, and hyphen-minus
+characters, respectively.
+
+File names are identifiers. Therefore, archiving works better when file
+names use only the portable character set without spaces added.
+
+
+@node File format
+@chapter File format
+@cindex file format
+
+In the diagram below, a box like this:
+
+@verbatim
++---+
+| | <-- the vertical bars might be missing
++---+
+@end verbatim
+
+represents one byte; a box like this:
+
+@verbatim
++==============+
+| |
++==============+
+@end verbatim
+
+represents a variable number of bytes or a fixed but large number of
+bytes (for example 512).
+
+@sp 1
+A tar.lz file consists of a series of lzip members (compressed data sets).
+The members simply appear one after another in the file, with no additional
+information before, between, or after them.
+
+Each lzip member contains one or more tar members in a simplified POSIX pax
+interchange format. The only pax typeflag value supported by tarlz (in
+addition to the typeflag values defined by the ustar format) is @samp{x}.
+The pax format is an extension on top of the ustar format that removes the
+size limitations of the ustar format.
+
+Each tar member contains one file archived, and is represented by the
+following sequence:
+
+@itemize @bullet
+@item
+An optional extended header block followed by one or more blocks that
+contain the extended header records as if they were the contents of a file;
+i.e., the extended header records are included as the data for this header
+block. This header block is of the form described in pax header block, with
+a typeflag value of @samp{x}.
+
+@item
+A header block in ustar format that describes the file. Any fields defined
+in the preceding optional extended header records override the associated
+fields in this header block for this file.
+
+@item
+Zero or more blocks that contain the contents of the file.
+@end itemize
+
+Each tar member must be contiguously stored in a lzip member for the
+parallel decoding operations like @samp{--list} to work. If any tar member
+is split over two or more lzip members, the archive must be decoded
+sequentially. @xref{Multi-threaded decoding}.
+
+At the end of the archive file there are two 512-byte blocks filled with
+binary zeros, interpreted as an end-of-archive indicator. These EOA blocks
+are either compressed in a separate lzip member or compressed along with the
+tar members contained in the last lzip member. For a compressed archive to
+be recognized by tarlz as appendable, the last lzip member must contain
+between 512 and 32256 zeros alone.
+
+The diagram below shows the correspondence between each tar member (formed
+by one or two headers plus optional data) in the tar archive and each
+@uref{http://www.nongnu.org/lzip/manual/lzip_manual.html#File-format,,lzip member}
+in the resulting multimember tar.lz archive, when per file compression is
+used:
+@ifnothtml
+@xref{File format,,,lzip}.
+@end ifnothtml
+
+@verbatim
+tar
++========+======+=================+===============+========+======+========+
+| header | data | extended header | extended data | header | data | EOA |
++========+======+=================+===============+========+======+========+
+
+tar.lz
++===============+=================================================+========+
+| member | member | member |
++===============+=================================================+========+
+@end verbatim
+
+@ignore
+When @samp{--permissive} is used, the following violations of the
+archive format are allowed:@*
+If several extended headers precede an ustar header, only the last
+extended header takes effect. The other extended headers are ignored.
+Similarly, if several records with the same keyword appear in the same
+block of extended records, only the last record for the repeated keyword
+takes effect. The other records for the repeated keyword are ignored.@*
+A global header inserted between an extended header and an ustar header.@*
+An extended header just before the end-of-archive blocks.
+@end ignore
+
+@sp 1
+@section Pax header block
+
+The pax header block is identical to the ustar header block described below
+except that the typeflag has the value @samp{x} (extended). The field
+@samp{size} is the size of the extended header data in bytes. Most other
+fields in the pax header block are zeroed on archive creation to prevent
+trouble if the archive is read by an ustar tool, and are ignored by tarlz on
+archive extraction. @xref{flawed-compat}.
+
+The pax extended header data consists of one or more records, each of
+them constructed as follows:@*
+@w{@samp{"%d %s=%s\n", <length>, <keyword>, <value>}}
+
+The fields <length> and <keyword> in the record must be limited to the
+portable character set (@pxref{Portable character set}). The field <length>
+contains the decimal length of the record in bytes, including the trailing
+newline. The field <value> is stored as-is, without conversion to UTF-8 nor
+any other transformation. The fields are separated by the ASCII characters
+space, equal-sign, and newline.
+
+These are the <keyword> values currently supported by tarlz:
+
+@table @code
+@item atime
+The signed decimal representation of the access time of the following file
+in seconds since (or before) the epoch, obtained from the function
+@samp{stat}. The atime record is created only for files with a modification
+time outside of the ustar range. @xref{ustar-mtime}.
+
+@item gid
+The unsigned decimal representation of the group ID of the group that owns
+the following file. The gid record is created only for files with a group ID
+greater than 2_097_151 (octal 7777777). @xref{ustar-uid-gid}.
+
+@item linkpath
+The file name of a link being created to another file, of any type,
+previously archived. This record overrides the field @samp{linkname} in the
+following ustar header block. The following ustar header block determines
+the type of link created. If typeflag of the following header block is 1, it
+will be a hard link. If typeflag is 2, it will be a symbolic link and the
+linkpath value will be used as the contents of the symbolic link. The
+linkpath record is created only for links with a link name that does not fit
+in the space provided by the ustar header.
+
+@item mtime
+The signed decimal representation of the modification time of the following
+file in seconds since (or before) the epoch, obtained from the function
+@samp{stat}. This record overrides the field @samp{mtime} in the following
+ustar header block. The mtime record is created only for files with a
+modification time outside of the ustar range. @xref{ustar-mtime}.
+
+@item path
+The file name of the following file. This record overrides the fields
+@samp{name} and @samp{prefix} in the following ustar header block. The path
+record is created for files with a name that does not fit in the space
+provided by the ustar header, but is also created for files that require any
+other extended record so that the fields @samp{name} and @samp{prefix} in
+the following ustar header block can be zeroed.
+
+@item size
+The size of the file in bytes, expressed as a decimal number using digits
+from the ISO/IEC 646:1991 (ASCII) standard. This record overrides the field
+@samp{size} in the following ustar header block. The size record is created
+only for files with a size value greater than 8_589_934_591
+@w{(octal 77777777777)}; that is, @w{8 GiB} (2^33 bytes) or larger.
+
+@item uid
+The unsigned decimal representation of the user ID of the file owner of the
+following file. The uid record is created only for files with a user ID
+greater than 2_097_151 (octal 7777777). @xref{ustar-uid-gid}.
+
+@anchor{key_crc32}
+@item GNU.crc32
+CRC32-C (Castagnoli) of the extended header data excluding the 8 bytes
+representing the CRC <value> itself. The <value> is represented as 8
+hexadecimal digits in big endian order,
+@w{@samp{22 GNU.crc32=00000000\n}}. The keyword of the CRC record is
+protected by the CRC to guarante that corruption is always detected when
+using @samp{--missing-crc} (except in case of CRC collision). A CRC was
+chosen because a checksum is too weak for a potentially large list of
+variable sized records. A checksum can't detect simple errors like the
+swapping of two bytes.
+
+@end table
+
+At verbosity level 1 or higher tarlz prints a diagnostic for each unknown
+extended header keyword found in an archive, once per keyword.
+
+@sp 1
+@section Ustar header block
+
+The ustar header block has a length of 512 bytes and is structured as
+shown in the following table. All lengths and offsets are in decimal.
+
+@multitable {Field Name} {Offset} {Length (in bytes)}
+@item Field Name @tab Offset @tab Length (in bytes)
+@item name @tab 0 @tab 100
+@item mode @tab 100 @tab 8
+@item uid @tab 108 @tab 8
+@item gid @tab 116 @tab 8
+@item size @tab 124 @tab 12
+@item mtime @tab 136 @tab 12
+@item chksum @tab 148 @tab 8
+@item typeflag @tab 156 @tab 1
+@item linkname @tab 157 @tab 100
+@item magic @tab 257 @tab 6
+@item version @tab 263 @tab 2
+@item uname @tab 265 @tab 32
+@item gname @tab 297 @tab 32
+@item devmajor @tab 329 @tab 8
+@item devminor @tab 337 @tab 8
+@item prefix @tab 345 @tab 155
+@end multitable
+
+All characters in the header block are coded using the ISO/IEC 646:1991
+(ASCII) standard, except in fields storing names for files, users, and
+groups. For maximum portability between implementations, names should only
+contain characters from the portable character set (@pxref{Portable
+character set}), but if an implementation supports the use of characters
+outside of @samp{/} and the portable character set in names for files,
+users, and groups, tarlz will use the byte values in these names unmodified.
+
+The fields @samp{name}, @samp{linkname}, and @samp{prefix} are
+null-terminated character strings except when all characters in the array
+contain non-null characters including the last character.
+
+The fields @samp{name} and @samp{prefix} produce the file name. A new file
+name is formed, if prefix is not an empty string (its first character is not
+null), by concatenating prefix (up to the first null character), a slash
+character, and name; otherwise, name is used alone. In either case, name is
+terminated at the first null character. If prefix begins with a null
+character, it is ignored. In this manner, file names of at most 256
+characters can be supported. If a file name does not fit in the space
+provided, an extended record is used to store the file name.
+
+The field @samp{linkname} does not use the prefix to produce a file name. If
+the link name does not fit in the 100 characters provided, an extended
+record is used to store the link name.
+
+The field @samp{mode} provides 12 access permission bits. The following
+table shows the symbolic name of each bit and its octal value:
+
+@multitable {Bit Name} {Value} {Bit Name} {Value} {Bit Name} {Value}
+@headitem Bit Name @tab Value @tab Bit Name @tab Value @tab Bit Name @tab Value
+@item S_ISUID @tab 04000 @tab S_ISGID @tab 02000 @tab S_ISVTX @tab 01000
+@item S_IRUSR @tab 00400 @tab S_IWUSR @tab 00200 @tab S_IXUSR @tab 00100
+@item S_IRGRP @tab 00040 @tab S_IWGRP @tab 00020 @tab S_IXGRP @tab 00010
+@item S_IROTH @tab 00004 @tab S_IWOTH @tab 00002 @tab S_IXOTH @tab 00001
+@end multitable
+
+@anchor{ustar-uid-gid}
+The fields @samp{uid} and @samp{gid} are the user and group IDs of the owner
+and group of the file, respectively. If the file uid or gid are greater than
+2_097_151 (octal 7777777), an extended record is used to store the uid or gid.
+
+The field @samp{size} contains the octal representation of the size of the
+file in bytes. If the field @samp{typeflag} specifies a file of type '0'
+(regular file) or '7' (high performance regular file), the number of logical
+records following the header is @w{(size / 512)} rounded to the next
+integer. For all other values of typeflag, tarlz either sets the size field
+to 0 or ignores it, and does not store or expect any logical records
+following the header. If the file size is larger than 8_589_934_591 bytes
+@w{(octal 77777777777)}, an extended record is used to store the file size.
+
+@anchor{ustar-mtime}
+The field @samp{mtime} contains the octal representation of the modification
+time of the file at the time it was archived, obtained from the function
+@samp{stat}. If the modification time is negative or larger than
+8_589_934_591 @w{(octal 77777777777)} seconds since the epoch, an extended
+record is used to store the modification time. The ustar range of mtime goes
+from @w{@samp{1970-01-01 00:00:00 UTC}} to @w{@samp{2242-03-16 12:56:31 UTC}}.
+
+The field @samp{chksum} contains the octal representation of the value of
+the simple sum of all bytes in the header logical record. Each byte in the
+header is treated as an unsigned value. When calculating the checksum, the
+chksum field is treated as if it were all space characters.
+
+The field @samp{typeflag} contains a single character specifying the type of
+file archived:
+
+@table @code
+@item '0'
+Regular file.
+
+@item '1'
+Hard link to another file, of any type, previously archived. Hard links must
+not contain file data.
+
+@item '2'
+Symbolic link.
+
+@item '3', '4'
+Character special file and block special file respectively. In this case the
+fields @samp{devmajor} and @samp{devminor} contain information defining the
+device in unspecified format.
+
+@item '5'
+Directory.
+
+@item '6'
+FIFO special file.
+
+@item '7'
+Reserved to represent a file to which an implementation has associated some
+high-performance attribute (contiguous file). Tarlz treats this type of file
+as a regular file (type 0).
+
+@end table
+
+The field @samp{magic} contains the ASCII null-terminated string "ustar".
+The field @samp{version} contains the characters "00" (0x30,0x30). The
+fields @samp{uname} and @samp{gname} are null-terminated character strings
+except when all characters in the array contain non-null characters
+including the last character. Each numeric field contains a leading space-
+or zero-filled, optionally null-terminated octal number using digits from
+the ISO/IEC 646:1991 (ASCII) standard. Tarlz is able to decode numeric
+fields 1 byte longer than standard ustar by not requiring a terminating null
+character.
+
+
+@node Amendments to pax format
+@chapter The reasons for the differences with pax
+@cindex Amendments to pax format
+
+Tarlz creates safe archives that allow the reliable detection of invalid or
+corrupt metadata during decoding even when the integrity checking of lzip
+can't be used because the lzip members are only decompressed partially, as
+it happens in parallel @samp{--diff}, @samp{--list}, and @samp{--extract}.
+In order to achieve this goal and avoid some other flaws in the pax format,
+tarlz makes some changes to the variant of the pax format that it uses. This
+chapter describes these changes and the concrete reasons to implement them.
+
+@sp 1
+@anchor{crc32}
+@section Add a CRC of the extended records
+
+The POSIX pax format has a serious flaw. The metadata stored in pax extended
+records are not protected by any kind of check sequence. Corruption in a
+long file name may cause the extraction of the file in the wrong place
+without warning. Corruption in a large file size may cause the truncation of
+the file or the appending of garbage to the file, both followed by a
+spurious warning about a corrupt header far from the place of the undetected
+corruption.
+
+Metadata like file name and file size must be always protected in an archive
+format because of the adverse effects of undetected corruption in them,
+potentially much worse that undetected corruption in the data. Even more so
+in the case of pax because the amount of metadata it stores is potentially
+large, making undetected corruption and archiver misbehavior more probable.
+
+Headers and metadata must be protected separately from data because the
+integrity checking of lzip may not be able to detect the corruption before
+the metadata has been used, for example, to create a new file in the wrong
+place.
+
+Because of the above, tarlz protects the extended records with a Cyclic
+Redundancy Check (CRC) in a way compatible with standard tar tools.
+@xref{key_crc32}.
+
+@sp 1
+@anchor{flawed-compat}
+@section Remove flawed backward compatibility
+
+In order to allow the extraction of pax archives by a tar utility conforming
+to the POSIX-2:1993 standard, POSIX.1-2008 recommends selecting extended
+header field values that allow such tar to create a regular file containing
+the extended header records as data. This approach is broken because if the
+extended header is needed because of a long file name, the fields
+@samp{name} and @samp{prefix} will be unable to contain the full file name.
+(Some tar implementations store the truncated name in the field @samp{name}
+alone, truncating the name to only 100 bytes instead of 256). Therefore the
+files corresponding to both the extended header and the overridden ustar
+header will be extracted using truncated file names, perhaps overwriting
+existing files or directories. It may be a security risk to extract a file
+with a truncated file name.
+
+To avoid this problem, tarlz writes extended headers with all fields zeroed
+except @samp{size} (which contains the size of the extended records),
+@samp{chksum}, @samp{typeflag}, @samp{magic}, and @samp{version}. In
+particular, tarlz sets the fields @samp{name} and @samp{prefix} to zero.
+This prevents old tar programs from extracting the extended records as a
+file in the wrong place. Tarlz also sets to zero those fields of the ustar
+header overridden by extended records. Finally, tarlz skips members with
+zeroed @samp{name} and @samp{prefix} when decoding, except when listing.
+This is needed to detect certain format violations during parallel
+extraction.
+
+If an extended header is required for any reason (for example a file size of
+@w{8 GiB} or larger, or a link name longer than 100 bytes), tarlz also moves
+the file name to the extended records to prevent an ustar tool from trying
+to extract the file or link. This also makes easier during parallel decoding
+the detection of a tar member split between two lzip members at the boundary
+between the extended header and the ustar header.
+
+@sp 1
+@section As simple as possible (but not simpler)
+
+The tarlz format is mainly ustar. Extended pax headers are used only when
+needed because the length of a file name or link name, or the size or other
+attribute of a file exceed the limits of the ustar format. Adding @w{1 KiB}
+of extended header and records to each member just to save subsecond
+timestamps seems wasteful for a backup format. Moreover, minimizing the
+overhead may help recovering the archive with lziprecover in case of
+corruption.
+
+Global pax headers are tolerated, but not supported; they are parsed and
+ignored. Some operations may not behave as expected if the archive contains
+global headers.
+
+@sp 1
+@section Improve reproducibility
+
+Pax includes by default the process ID of the pax process in the ustar name
+of the extended headers, making the archive not reproducible. Tarlz stores
+the true name of the file just once, either in the ustar header or in the
+extended records, making it easier to produce reproducible archives.
+
+Pax allows an extended record to have length x-1 or x if x is a power of
+ten; @samp{99<97_bytes>} or @samp{100<97_bytes>}. Tarlz minimizes the length
+of the record and always produces a length of x-1 in these cases.
+
+@sp 1
+@section No data in hard links
+
+Tarlz does not allow data in hard link members. The data (if any) must be in
+the member determining the type of the file (which can't be a link). If all
+the names of a file are stored as hard links, the type of the file is lost.
+Not allowing data in hard links also prevents invalid actions like
+extracting file data for a hard link to a symbolic link or to a directory.
+
+@sp 1
+@section Avoid misconversions to/from UTF-8
+
+There is no portable way to tell what charset a text string is coded into.
+Therefore, tarlz stores all fields representing text strings unmodified,
+without conversion to UTF-8 nor any other transformation. This prevents
+accidental double UTF-8 conversions. If the need arises this behavior will
+be adjusted with a command line option in the future.
+
+
+@node Program design
+@chapter Internal structure of tarlz
+@cindex program design
+
+The parts of tarlz related to sequential processing of the archive are more
+or less similar to any other tar and won't be described here. The interesting
+parts described here are those related to Multi-threaded processing.
+
+The structure of the part of tarlz performing Multi-threaded archive
+creation is somewhat similar to that of
+@uref{http://www.nongnu.org/lzip/plzip.html#Program-design,,plzip} with the
+added complication of the solidity levels.
+@ifnothtml
+@xref{Program design,,,plzip}.
+@end ifnothtml
+A grouper thread and several worker threads are created, acting the main
+thread as muxer (multiplexer) thread. A "packet courier" takes care of data
+transfers among threads and limits the maximum number of data blocks
+(packets) being processed simultaneously.
+
+The grouper traverses the directory tree, groups together the metadata of
+the files to be archived in each lzip member, and distributes them to the
+workers. The workers compress the metadata received from the grouper along
+with the file data read from the file system. The muxer collects processed
+packets from the workers, and writes them to the archive.
+
+@verbatim
+.--------.
+| data|---> to each worker below
+| | .------------.
+| file | ,-->| worker 0 |--,
+| system | | `------------' |
+| | .---------. | .------------. | .-------. .---------.
+|metadata|--->| grouper |-+-->| worker 1 |--+-->| muxer |-->| archive |
+`--------' `---------' | `------------' | `-------' `---------'
+ | ... |
+ | .------------. |
+ `-->| worker N-1 |--'
+ `------------'
+@end verbatim
+
+Decoding an archive is somewhat similar to how plzip decompresses a regular
+file to standard output, with the differences that it is not the data but
+only messages what is written to stdout/stderr, and that each worker may
+access files in the file system either to read them (diff) or write them
+(extract). As in plzip, each worker reads members directly from the archive.
+
+@verbatim
+.--------.
+| file |<---> data to/from each worker below
+| system |
+`--------' .------------.
+ ,-->| worker 0 |--,
+ | `------------' |
+.---------. | .------------. | .-------. .--------.
+| archive |-+-->| worker 1 |--+-->| muxer |-->| stdout |
+`---------' | `------------' | `-------' | stderr |
+ | ... | `--------'
+ | .------------. |
+ `-->| worker N-1 |--'
+ `------------'
+@end verbatim
+
+As misaligned tar.lz archives can't be decoded in parallel, and the
+misalignment can't be detected until after decoding has started, a
+"mastership request" mechanism has been designed that allows the decoding to
+continue instead of signalling an error.
+
+During parallel decoding, if a worker finds a misalignment, it requests
+mastership to decode the rest of the archive. When mastership is requested,
+an error_member_id is set, and all subsequently received packets with
+member_id > error_member_id are rejected. All workers requesting mastership
+are blocked at the request_mastership call until mastership is granted.
+Mastership is granted to the delivering worker when its queue is empty to
+make sure that all preceding packets have been processed. When mastership is
+granted, all packets are deleted and all subsequently received packets not
+coming from the master are rejected.
+
+If a worker can't continue decoding for any cause (for example lack of
+memory or finding a split tar member at the beginning of a lzip member), it
+requests mastership to print an error and terminate the program. Only if
+some other worker requests mastership in a previous lzip member can this
+error be avoided.
+
+
+@node Multi-threaded decoding
+@chapter Limitations of parallel tar decoding
+@cindex parallel tar decoding
+
+Safely decoding an arbitrary tar archive in parallel is only possible if one
+decodes the headers sequentially first. For example, if a tar archive
+containing another tar archive is decoded starting from some position other
+than the beginning, there is no way to know if the first header found there
+belongs to the outer tar archive or to the inner tar archive. Tar is a
+format inherently serial; it was designed for tapes.
+
+The pax format is even more serial than the ustar format. Two headers need
+to be decoded sequentially for each file. The extended header may even need
+parsing to reveal something as basic as file size. If a thread decodes the
+ustar header skipping the preceding extended header, it may extract a file
+of incorrect size at the wrong place. Moreover, a pax archive with global
+headers can't be decoded in parallel because each thread can't know about
+the global headers decoded by other threads.
+
+In the case of compressed tar archives, the start of each compressed block
+determines one point through which the tar archive can be decoded in
+parallel. Therefore, in tar.lz archives the decoding operations can't be
+parallelized if the tar members are not aligned with the lzip members. Tar
+archives compressed with plzip can't be decoded in parallel because tar and
+plzip do not have a way to align both sets of members. Certainly one can
+decompress one such archive with a multi-threaded tool like plzip, but the
+increase in speed is not as large as it could be because plzip must
+serialize the decompressed data and pass them to tar, which decodes them
+sequentially, one tar member at a time.
+
+On the other hand, if the tar.lz archive is created with a tool like tarlz,
+which can guarantee the alignment between tar members and lzip members
+because it controls both archiving and compression, then the lzip format
+becomes an indexed layer on top of the tar archive which makes possible
+decoding it safely in parallel.
+
+Tarlz is able to automatically decode aligned and unaligned multimember
+tar.lz archives, keeping backwards compatibility. If tarlz finds a member
+misalignment during multi-threaded decoding, it switches to single-threaded
+mode and continues decoding the archive.
+
+If the files in the archive are large, multi-threaded @samp{--list} on a
+regular (seekable) tar.lz archive can be hundreds of times faster than
+sequential @samp{--list} because, in addition to using several processors,
+it only needs to decompress part of each lzip member. See the following
+example listing the Silesia corpus on a dual core machine:
+
+@example
+tarlz -9 --no-solid -cf silesia.tar.lz silesia
+time lzip -cd silesia.tar.lz | tar -tf - (5.032s)
+time plzip -cd silesia.tar.lz | tar -tf - (3.256s)
+time tarlz -tf silesia.tar.lz (0.020s)
+@end example
+
+On the other hand, multi-threaded @samp{--list} won't detect corruption in
+the tar member data because it only decodes the part of each lzip member
+corresponding to the tar member header. This is another reason why the tar
+headers must provide their own integrity checking.
+
+@sp 1
+@anchor{mt-extraction}
+@section Limitations of multi-threaded extraction
+
+Multi-threaded extraction may produce different output than single-threaded
+extraction in some cases:
+
+During multi-threaded extraction, several independent threads are
+simultaneously reading the archive and creating files in the file system.
+The archive is not read sequentially. As a consequence, any error or
+weirdness in the archive (like a corrupt member or an end-of-archive block
+in the middle of the archive) won't be usually detected until part of the
+archive beyond that point has been processed.
+
+If the archive contains two or more tar members with the same name,
+single-threaded extraction extracts the members in the order they appear in
+the archive and leaves in the file system the last version of the file. But
+multi-threaded extraction may extract the members in any order and leave in
+the file system any version of the file nondeterministically. It is
+unspecified which of the tar members is extracted.
+
+If the same file is extracted through several paths (different member names
+resolve to the same file in the file system), the result is undefined.
+(Probably the resulting file will be mangled).
+
+Extraction of a hard link may fail if it is extracted before the file it
+links to.
+
+
+@node Minimum archive sizes
+@chapter Minimum archive sizes required for multi-threaded block compression
+@cindex minimum archive sizes
+
+When creating or appending to a compressed archive using multi-threaded
+block compression, tarlz puts tar members together in blocks and compresses
+as many blocks simultaneously as worker threads are chosen, creating a
+multimember compressed archive.
+
+For this to work as expected (and roughly multiply the compression speed by
+the number of available processors), the uncompressed archive must be at
+least as large as the number of worker threads times the block size
+(@pxref{--data-size}). Else some processors will not get any data to
+compress, and compression will be proportionally slower. The maximum speed
+increase achievable on a given archive is limited by the ratio
+@w{(uncompressed_size / data_size)}. For example, a tarball the size of gcc
+or linux will scale up to 10 or 14 processors at level -9.
+
+The following table shows the minimum uncompressed archive size needed for
+full use of N processors at a given compression level, using the default
+data size for each level:
+
+@multitable {Processors} {512 MiB} {512 MiB} {512 MiB} {512 MiB} {512 MiB} {512 MiB}
+@headitem Processors @tab 2 @tab 4 @tab 8 @tab 16 @tab 64 @tab 256
+@item Level
+@item -0 @tab 2 MiB @tab 4 MiB @tab 8 MiB @tab 16 MiB @tab 64 MiB @tab 256 MiB
+@item -1 @tab 4 MiB @tab 8 MiB @tab 16 MiB @tab 32 MiB @tab 128 MiB @tab 512 MiB
+@item -2 @tab 6 MiB @tab 12 MiB @tab 24 MiB @tab 48 MiB @tab 192 MiB @tab 768 MiB
+@item -3 @tab 8 MiB @tab 16 MiB @tab 32 MiB @tab 64 MiB @tab 256 MiB @tab 1 GiB
+@item -4 @tab 12 MiB @tab 24 MiB @tab 48 MiB @tab 96 MiB @tab 384 MiB @tab 1.5 GiB
+@item -5 @tab 16 MiB @tab 32 MiB @tab 64 MiB @tab 128 MiB @tab 512 MiB @tab 2 GiB
+@item -6 @tab 32 MiB @tab 64 MiB @tab 128 MiB @tab 256 MiB @tab 1 GiB @tab 4 GiB
+@item -7 @tab 64 MiB @tab 128 MiB @tab 256 MiB @tab 512 MiB @tab 2 GiB @tab 8 GiB
+@item -8 @tab 96 MiB @tab 192 MiB @tab 384 MiB @tab 768 MiB @tab 3 GiB @tab 12 GiB
+@item -9 @tab 128 MiB @tab 256 MiB @tab 512 MiB @tab 1 GiB @tab 4 GiB @tab 16 GiB
+@end multitable
+
+
+@node Examples
+@chapter A small tutorial with examples
+@cindex examples
+
+@noindent
+Example 1: Create a multimember compressed archive @samp{archive.tar.lz}
+containing files @samp{a}, @samp{b} and @samp{c}.
+
+@example
+tarlz -cf archive.tar.lz a b c
+@end example
+
+@sp 1
+@noindent
+Example 2: Append files @samp{d} and @samp{e} to the multimember compressed
+archive @samp{archive.tar.lz}.
+
+@example
+tarlz -rf archive.tar.lz d e
+@end example
+
+@sp 1
+@noindent
+Example 3: Create a solidly compressed appendable archive
+@samp{archive.tar.lz} containing files @samp{a}, @samp{b} and @samp{c}.
+Then append files @samp{d} and @samp{e} to the archive.
+
+@example
+tarlz --asolid -cf archive.tar.lz a b c
+tarlz --asolid -rf archive.tar.lz d e
+@end example
+
+@sp 1
+@noindent
+Example 4: Create a compressed appendable archive containing directories
+@samp{dir1}, @samp{dir2} and @samp{dir3} with a separate lzip member per
+directory. Then append files @samp{a}, @samp{b}, @samp{c}, @samp{d} and
+@samp{e} to the archive, all of them contained in a single lzip member.
+The resulting archive @samp{archive.tar.lz} contains 5 lzip members
+(including the end-of-archive member).
+
+@example
+tarlz --dsolid -cf archive.tar.lz dir1 dir2 dir3
+tarlz --asolid -rf archive.tar.lz a b c d e
+@end example
+
+@sp 1
+@noindent
+Example 5: Create a solidly compressed archive @samp{archive.tar.lz}
+containing files @samp{a}, @samp{b} and @samp{c}. Note that no more
+files can be later appended to the archive.
+
+@example
+tarlz --solid -cf archive.tar.lz a b c
+@end example
+
+@sp 1
+@noindent
+Example 6: Extract all files from archive @samp{archive.tar.lz}.
+
+@example
+tarlz -xf archive.tar.lz
+@end example
+
+@sp 1
+@noindent
+Example 7: Extract files @samp{a} and @samp{c}, and the whole tree under
+directory @samp{dir1} from archive @samp{archive.tar.lz}.
+
+@example
+tarlz -xf archive.tar.lz a c dir1
+@end example
+
+@sp 1
+@noindent
+Example 8: Copy the contents of directory @samp{sourcedir} to the directory
+@samp{destdir}.
+
+@example
+tarlz -C sourcedir --uncompressed -cf - . | tarlz -C destdir -xf -
+@end example
+
+@sp 1
+@noindent
+Example 9: Compress the existing POSIX archive @samp{archive.tar} and write
+the output to @samp{archive.tar.lz}. Compress each member individually for
+maximum availability. (If one member in the compressed archive gets damaged,
+the other members can still be extracted).
+
+@example
+tarlz -z --no-solid archive.tar
+@end example
+
+@sp 1
+@noindent
+Example 10: Compress the archive @samp{archive.tar} and write the output to
+@samp{foo.tar.lz}.
+
+@example
+tarlz -z -o foo.tar.lz archive.tar
+@end example
+
+@sp 1
+@noindent
+Example 11: Concatenate and compress two archives @samp{archive1.tar} and
+@samp{archive2.tar}, and write the output to @samp{foo.tar.lz}.
+
+@example
+tarlz -A archive1.tar archive2.tar | tarlz -z -o foo.tar.lz
+@end example
+
+
+@node Problems
+@chapter Reporting bugs
+@cindex bugs
+@cindex getting help
+
+There are probably bugs in tarlz. There are certainly errors and
+omissions in this manual. If you report them, they will get fixed. If
+you don't, no one will ever know about them and they will remain unfixed
+for all eternity, if not longer.
+
+If you find a bug in tarlz, please send electronic mail to
+@email{lzip-bug@@nongnu.org}. Include the version number, which you can
+find by running @w{@samp{tarlz --version}} and
+@w{@samp{tarlz -v --check-lib}}.
+
+
+@node Concept index
+@unnumbered Concept index
+
+@printindex cp
+
+@bye