summaryrefslogtreecommitdiffstats
path: root/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'README.md')
-rw-r--r--README.md225
1 files changed, 225 insertions, 0 deletions
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..a1f2ee6
--- /dev/null
+++ b/README.md
@@ -0,0 +1,225 @@
+# TCPDUMP 4.x.y by [The Tcpdump Group](https://www.tcpdump.org/)
+
+**To report a security issue please send an e-mail to security@tcpdump.org.**
+
+To report bugs and other problems, contribute patches, request a
+feature, provide generic feedback etc please see the
+[guidelines for contributing](CONTRIBUTING.md) in the tcpdump source tree root.
+
+Anonymous Git is available via
+
+ https://github.com/the-tcpdump-group/tcpdump.git
+
+This directory contains source code for tcpdump, a tool for network
+monitoring and data acquisition.
+
+Over the past few years, tcpdump has been steadily improved by the
+excellent contributions from the Internet community (just browse
+through the [change log](CHANGES)). We are grateful for all the input.
+
+### Supported platforms
+In many operating systems tcpdump is available as a native package or port,
+which simplifies installation of updates and long-term maintenance. However,
+the native packages are sometimes a few versions behind and to try a more
+recent snapshot it will take to compile tcpdump from the source code.
+
+tcpdump compiles and works on at least the following platforms:
+
+* AIX
+* DragonFly BSD
+* FreeBSD
+* Haiku
+* HP-UX 11i
+* illumos (OmniOS, OpenIndiana)
+* GNU/Linux
+* {Mac} OS X / macOS
+* NetBSD
+* OpenBSD
+* OpenWrt
+* Solaris
+* Windows (requires WinPcap or Npcap, and Visual Studio with CMake)
+
+### Dependency on libpcap
+Tcpdump uses libpcap, a system-independent interface for user-level
+packet capture. Before building tcpdump, you must first retrieve and
+build libpcap.
+
+Once libpcap is built (either install it or make sure it's in
+`../libpcap`), you can build tcpdump using the procedure in the
+[installation notes](INSTALL.md).
+
+### Origins of tcpdump
+The program is loosely based on SMI's "etherfind" although none of the
+etherfind code remains. It was originally written by Van Jacobson as
+part of an ongoing research project to investigate and improve TCP and
+Internet gateway performance. The parts of the program originally
+taken from Sun's etherfind were later re-written by Steven McCanne of
+LBL. To insure that there would be no vestige of proprietary code in
+tcpdump, Steve wrote these pieces from the specification given by the
+manual entry, with no access to the source of tcpdump or etherfind.
+```text
+formerly from Lawrence Berkeley National Laboratory
+ Network Research Group <tcpdump@ee.lbl.gov>
+ ftp://ftp.ee.lbl.gov/old/tcpdump.tar.Z (3.4)
+```
+
+### See also
+Richard Stevens gives an excellent treatment of the Internet protocols
+in his book *"TCP/IP Illustrated, Volume 1"*. If you want to learn more
+about tcpdump and how to interpret its output, pick up this book.
+
+Another tool that tcpdump users might find useful is
+[tcpslice](https://github.com/the-tcpdump-group/tcpslice).
+It is a program that can be used to extract portions of tcpdump binary
+trace files.
+
+### The original LBL README by Steve McCanne, Craig Leres and Van Jacobson
+```
+This directory also contains some short awk programs intended as
+examples of ways to reduce tcpdump data when you're tracking
+particular network problems:
+
+send-ack.awk
+ Simplifies the tcpdump trace for an ftp (or other unidirectional
+ tcp transfer). Since we assume that one host only sends and
+ the other only acks, all address information is left off and
+ we just note if the packet is a "send" or an "ack".
+
+ There is one output line per line of the original trace.
+ Field 1 is the packet time in decimal seconds, relative
+ to the start of the conversation. Field 2 is delta-time
+ from last packet. Field 3 is packet type/direction.
+ "Send" means data going from sender to receiver, "ack"
+ means an ack going from the receiver to the sender. A
+ preceding "*" indicates that the data is a retransmission.
+ A preceding "-" indicates a hole in the sequence space
+ (i.e., missing packet(s)), a "#" means an odd-size (not max
+ seg size) packet. Field 4 has the packet flags
+ (same format as raw trace). Field 5 is the sequence
+ number (start seq. num for sender, next expected seq number
+ for acks). The number in parens following an ack is
+ the delta-time from the first send of the packet to the
+ ack. A number in parens following a send is the
+ delta-time from the first send of the packet to the
+ current send (on duplicate packets only). Duplicate
+ sends or acks have a number in square brackets showing
+ the number of duplicates so far.
+
+ Here is a short sample from near the start of an ftp:
+ 3.00 0.20 send . 512
+ 3.20 0.20 ack . 1024 (0.20)
+ 3.20 0.00 send P 1024
+ 3.40 0.20 ack . 1536 (0.20)
+ 3.80 0.40 * send . 0 (3.80) [2]
+ 3.82 0.02 * ack . 1536 (0.62) [2]
+ Three seconds into the conversation, bytes 512 through 1023
+ were sent. 200ms later they were acked. Shortly thereafter
+ bytes 1024-1535 were sent and again acked after 200ms.
+ Then, for no apparent reason, 0-511 is retransmitted, 3.8
+ seconds after its initial send (the round trip time for this
+ ftp was 1sec, +-500ms). Since the receiver is expecting
+ 1536, 1536 is re-acked when 0 arrives.
+
+packetdat.awk
+ Computes chunk summary data for an ftp (or similar
+ unidirectional tcp transfer). [A "chunk" refers to
+ a chunk of the sequence space -- essentially the packet
+ sequence number divided by the max segment size.]
+
+ A summary line is printed showing the number of chunks,
+ the number of packets it took to send that many chunks
+ (if there are no lost or duplicated packets, the number
+ of packets should equal the number of chunks) and the
+ number of acks.
+
+ Following the summary line is one line of information
+ per chunk. The line contains eight fields:
+ 1 - the chunk number
+ 2 - the start sequence number for this chunk
+ 3 - time of first send
+ 4 - time of last send
+ 5 - time of first ack
+ 6 - time of last ack
+ 7 - number of times chunk was sent
+ 8 - number of times chunk was acked
+ (all times are in decimal seconds, relative to the start
+ of the conversation.)
+
+ As an example, here is the first part of the output for
+ an ftp trace:
+
+ # 134 chunks. 536 packets sent. 508 acks.
+ 1 1 0.00 5.80 0.20 0.20 4 1
+ 2 513 0.28 6.20 0.40 0.40 4 1
+ 3 1025 1.16 6.32 1.20 1.20 4 1
+ 4 1561 1.86 15.00 2.00 2.00 6 1
+ 5 2049 2.16 15.44 2.20 2.20 5 1
+ 6 2585 2.64 16.44 2.80 2.80 5 1
+ 7 3073 3.00 16.66 3.20 3.20 4 1
+ 8 3609 3.20 17.24 3.40 5.82 4 11
+ 9 4097 6.02 6.58 6.20 6.80 2 5
+
+ This says that 134 chunks were transferred (about 70K
+ since the average packet size was 512 bytes). It took
+ 536 packets to transfer the data (i.e., on the average
+ each chunk was transmitted four times). Looking at,
+ say, chunk 4, we see it represents the 512 bytes of
+ sequence space from 1561 to 2048. It was first sent
+ 1.86 seconds into the conversation. It was last
+ sent 15 seconds into the conversation and was sent
+ a total of 6 times (i.e., it was retransmitted every
+ 2 seconds on the average). It was acked once, 140ms
+ after it first arrived.
+
+stime.awk
+atime.awk
+ Output one line per send or ack, respectively, in the form
+ <time> <seq. number>
+ where <time> is the time in seconds since the start of the
+ transfer and <seq. number> is the sequence number being sent
+ or acked. I typically plot this data looking for suspicious
+ patterns.
+
+
+The problem I was looking at was the bulk-data-transfer
+throughput of medium delay network paths (1-6 sec. round trip
+time) under typical DARPA Internet conditions. The trace of the
+ftp transfer of a large file was used as the raw data source.
+The method was:
+
+ - On a local host (but not the Sun running tcpdump), connect to
+ the remote ftp.
+
+ - On the monitor Sun, start the trace going. E.g.,
+ tcpdump host local-host and remote-host and port ftp-data >tracefile
+
+ - On local, do either a get or put of a large file (~500KB),
+ preferably to the null device (to minimize effects like
+ closing the receive window while waiting for a disk write).
+
+ - When transfer is finished, stop tcpdump. Use awk to make up
+ two files of summary data (maxsize is the maximum packet size,
+ tracedata is the file of tcpdump tracedata):
+ awk -f send-ack.awk packetsize=avgsize tracedata >sa
+ awk -f packetdat.awk packetsize=avgsize tracedata >pd
+
+ - While the summary data files are printing, take a look at
+ how the transfer behaved:
+ awk -f stime.awk tracedata | xgraph
+ (90% of what you learn seems to happen in this step).
+
+ - Do all of the above steps several times, both directions,
+ at different times of day, with different protocol
+ implementations on the other end.
+
+ - Using one of the Unix data analysis packages (in my case,
+ S and Gary Perlman's Unix|Stat), spend a few months staring
+ at the data.
+
+ - Change something in the local protocol implementation and
+ redo the steps above.
+
+ - Once a week, tell your funding agent that you're discovering
+ wonderful things and you'll write up that research report
+ "real soon now".
+```