/* * Copyright (c) 2001 * Fortress Technologies, Inc. All rights reserved. * Charlie Lenahan (clenahan@fortresstech.com) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that: (1) source code distributions * retain the above copyright notice and this paragraph in its entirety, (2) * distributions including binary code include the above copyright notice and * this paragraph in its entirety in the documentation or other materials * provided with the distribution, and (3) all advertising materials mentioning * features or use of this software display the following acknowledgement: * ``This product includes software developed by the University of California, * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of * the University nor the names of its contributors may be used to endorse * or promote products derived from this software without specific prior * written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ /* \summary: IEEE 802.11 printer */ #ifdef HAVE_CONFIG_H #include #endif #include "netdissect-stdinc.h" #include #include "netdissect.h" #include "addrtoname.h" #include "extract.h" #include "cpack.h" /* Lengths of 802.11 header components. */ #define IEEE802_11_FC_LEN 2 #define IEEE802_11_DUR_LEN 2 #define IEEE802_11_DA_LEN 6 #define IEEE802_11_SA_LEN 6 #define IEEE802_11_BSSID_LEN 6 #define IEEE802_11_RA_LEN 6 #define IEEE802_11_TA_LEN 6 #define IEEE802_11_ADDR1_LEN 6 #define IEEE802_11_SEQ_LEN 2 #define IEEE802_11_CTL_LEN 2 #define IEEE802_11_CARRIED_FC_LEN 2 #define IEEE802_11_HT_CONTROL_LEN 4 #define IEEE802_11_IV_LEN 3 #define IEEE802_11_KID_LEN 1 /* Frame check sequence length. */ #define IEEE802_11_FCS_LEN 4 /* Lengths of beacon components. */ #define IEEE802_11_TSTAMP_LEN 8 #define IEEE802_11_BCNINT_LEN 2 #define IEEE802_11_CAPINFO_LEN 2 #define IEEE802_11_LISTENINT_LEN 2 #define IEEE802_11_AID_LEN 2 #define IEEE802_11_STATUS_LEN 2 #define IEEE802_11_REASON_LEN 2 /* Length of previous AP in reassocation frame */ #define IEEE802_11_AP_LEN 6 #define T_MGMT 0x0 /* management */ #define T_CTRL 0x1 /* control */ #define T_DATA 0x2 /* data */ #define T_RESV 0x3 /* reserved */ #define ST_ASSOC_REQUEST 0x0 #define ST_ASSOC_RESPONSE 0x1 #define ST_REASSOC_REQUEST 0x2 #define ST_REASSOC_RESPONSE 0x3 #define ST_PROBE_REQUEST 0x4 #define ST_PROBE_RESPONSE 0x5 /* RESERVED 0x6 */ /* RESERVED 0x7 */ #define ST_BEACON 0x8 #define ST_ATIM 0x9 #define ST_DISASSOC 0xA #define ST_AUTH 0xB #define ST_DEAUTH 0xC #define ST_ACTION 0xD /* RESERVED 0xE */ /* RESERVED 0xF */ static const struct tok st_str[] = { { ST_ASSOC_REQUEST, "Assoc Request" }, { ST_ASSOC_RESPONSE, "Assoc Response" }, { ST_REASSOC_REQUEST, "ReAssoc Request" }, { ST_REASSOC_RESPONSE, "ReAssoc Response" }, { ST_PROBE_REQUEST, "Probe Request" }, { ST_PROBE_RESPONSE, "Probe Response" }, { ST_BEACON, "Beacon" }, { ST_ATIM, "ATIM" }, { ST_DISASSOC, "Disassociation" }, { ST_AUTH, "Authentication" }, { ST_DEAUTH, "DeAuthentication" }, { ST_ACTION, "Action" }, { 0, NULL } }; #define CTRL_CONTROL_WRAPPER 0x7 #define CTRL_BAR 0x8 #define CTRL_BA 0x9 #define CTRL_PS_POLL 0xA #define CTRL_RTS 0xB #define CTRL_CTS 0xC #define CTRL_ACK 0xD #define CTRL_CF_END 0xE #define CTRL_END_ACK 0xF static const struct tok ctrl_str[] = { { CTRL_CONTROL_WRAPPER, "Control Wrapper" }, { CTRL_BAR, "BAR" }, { CTRL_BA, "BA" }, { CTRL_PS_POLL, "Power Save-Poll" }, { CTRL_RTS, "Request-To-Send" }, { CTRL_CTS, "Clear-To-Send" }, { CTRL_ACK, "Acknowledgment" }, { CTRL_CF_END, "CF-End" }, { CTRL_END_ACK, "CF-End+CF-Ack" }, { 0, NULL } }; #define DATA_DATA 0x0 #define DATA_DATA_CF_ACK 0x1 #define DATA_DATA_CF_POLL 0x2 #define DATA_DATA_CF_ACK_POLL 0x3 #define DATA_NODATA 0x4 #define DATA_NODATA_CF_ACK 0x5 #define DATA_NODATA_CF_POLL 0x6 #define DATA_NODATA_CF_ACK_POLL 0x7 #define DATA_QOS_DATA 0x8 #define DATA_QOS_DATA_CF_ACK 0x9 #define DATA_QOS_DATA_CF_POLL 0xA #define DATA_QOS_DATA_CF_ACK_POLL 0xB #define DATA_QOS_NODATA 0xC #define DATA_QOS_CF_POLL_NODATA 0xE #define DATA_QOS_CF_ACK_POLL_NODATA 0xF /* * The subtype field of a data frame is, in effect, composed of 4 flag * bits - CF-Ack, CF-Poll, Null (means the frame doesn't actually have * any data), and QoS. */ #define DATA_FRAME_IS_CF_ACK(x) ((x) & 0x01) #define DATA_FRAME_IS_CF_POLL(x) ((x) & 0x02) #define DATA_FRAME_IS_NULL(x) ((x) & 0x04) #define DATA_FRAME_IS_QOS(x) ((x) & 0x08) /* * Bits in the frame control field. */ #define FC_VERSION(fc) ((fc) & 0x3) #define FC_TYPE(fc) (((fc) >> 2) & 0x3) #define FC_SUBTYPE(fc) (((fc) >> 4) & 0xF) #define FC_TO_DS(fc) ((fc) & 0x0100) #define FC_FROM_DS(fc) ((fc) & 0x0200) #define FC_MORE_FLAG(fc) ((fc) & 0x0400) #define FC_RETRY(fc) ((fc) & 0x0800) #define FC_POWER_MGMT(fc) ((fc) & 0x1000) #define FC_MORE_DATA(fc) ((fc) & 0x2000) #define FC_PROTECTED(fc) ((fc) & 0x4000) #define FC_ORDER(fc) ((fc) & 0x8000) struct mgmt_header_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr da; nd_mac_addr sa; nd_mac_addr bssid; nd_uint16_t seq_ctrl; }; #define MGMT_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+\ IEEE802_11_DA_LEN+IEEE802_11_SA_LEN+\ IEEE802_11_BSSID_LEN+IEEE802_11_SEQ_LEN) #define CAPABILITY_ESS(cap) ((cap) & 0x0001) #define CAPABILITY_IBSS(cap) ((cap) & 0x0002) #define CAPABILITY_CFP(cap) ((cap) & 0x0004) #define CAPABILITY_CFP_REQ(cap) ((cap) & 0x0008) #define CAPABILITY_PRIVACY(cap) ((cap) & 0x0010) struct ssid_t { uint8_t element_id; uint8_t length; u_char ssid[33]; /* 32 + 1 for null */ }; struct rates_t { uint8_t element_id; uint8_t length; uint8_t rate[16]; }; struct challenge_t { uint8_t element_id; uint8_t length; uint8_t text[254]; /* 1-253 + 1 for null */ }; struct fh_t { uint8_t element_id; uint8_t length; uint16_t dwell_time; uint8_t hop_set; uint8_t hop_pattern; uint8_t hop_index; }; struct ds_t { uint8_t element_id; uint8_t length; uint8_t channel; }; struct cf_t { uint8_t element_id; uint8_t length; uint8_t count; uint8_t period; uint16_t max_duration; uint16_t dur_remaining; }; struct tim_t { uint8_t element_id; uint8_t length; uint8_t count; uint8_t period; uint8_t bitmap_control; uint8_t bitmap[251]; }; #define E_SSID 0 #define E_RATES 1 #define E_FH 2 #define E_DS 3 #define E_CF 4 #define E_TIM 5 #define E_IBSS 6 /* reserved 7 */ /* reserved 8 */ /* reserved 9 */ /* reserved 10 */ /* reserved 11 */ /* reserved 12 */ /* reserved 13 */ /* reserved 14 */ /* reserved 15 */ /* reserved 16 */ #define E_CHALLENGE 16 /* reserved 17 */ /* reserved 18 */ /* reserved 19 */ /* reserved 16 */ /* reserved 16 */ struct mgmt_body_t { uint8_t timestamp[IEEE802_11_TSTAMP_LEN]; uint16_t beacon_interval; uint16_t listen_interval; uint16_t status_code; uint16_t aid; u_char ap[IEEE802_11_AP_LEN]; uint16_t reason_code; uint16_t auth_alg; uint16_t auth_trans_seq_num; int challenge_present; struct challenge_t challenge; uint16_t capability_info; int ssid_present; struct ssid_t ssid; int rates_present; struct rates_t rates; int ds_present; struct ds_t ds; int cf_present; struct cf_t cf; int fh_present; struct fh_t fh; int tim_present; struct tim_t tim; }; struct ctrl_control_wrapper_hdr_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr addr1; nd_uint16_t carried_fc[IEEE802_11_CARRIED_FC_LEN]; nd_uint16_t ht_control[IEEE802_11_HT_CONTROL_LEN]; }; #define CTRL_CONTROL_WRAPPER_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+\ IEEE802_11_ADDR1_LEN+\ IEEE802_11_CARRIED_FC_LEN+\ IEEE802_11_HT_CONTROL_LEN) struct ctrl_rts_hdr_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr ra; nd_mac_addr ta; }; #define CTRL_RTS_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+\ IEEE802_11_RA_LEN+IEEE802_11_TA_LEN) struct ctrl_cts_hdr_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr ra; }; #define CTRL_CTS_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+IEEE802_11_RA_LEN) struct ctrl_ack_hdr_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr ra; }; #define CTRL_ACK_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+IEEE802_11_RA_LEN) struct ctrl_ps_poll_hdr_t { nd_uint16_t fc; nd_uint16_t aid; nd_mac_addr bssid; nd_mac_addr ta; }; #define CTRL_PS_POLL_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_AID_LEN+\ IEEE802_11_BSSID_LEN+IEEE802_11_TA_LEN) struct ctrl_end_hdr_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr ra; nd_mac_addr bssid; }; #define CTRL_END_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+\ IEEE802_11_RA_LEN+IEEE802_11_BSSID_LEN) struct ctrl_end_ack_hdr_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr ra; nd_mac_addr bssid; }; #define CTRL_END_ACK_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+\ IEEE802_11_RA_LEN+IEEE802_11_BSSID_LEN) struct ctrl_ba_hdr_t { nd_uint16_t fc; nd_uint16_t duration; nd_mac_addr ra; }; #define CTRL_BA_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+IEEE802_11_RA_LEN) struct ctrl_bar_hdr_t { nd_uint16_t fc; nd_uint16_t dur; nd_mac_addr ra; nd_mac_addr ta; nd_uint16_t ctl; nd_uint16_t seq; }; #define CTRL_BAR_HDRLEN (IEEE802_11_FC_LEN+IEEE802_11_DUR_LEN+\ IEEE802_11_RA_LEN+IEEE802_11_TA_LEN+\ IEEE802_11_CTL_LEN+IEEE802_11_SEQ_LEN) struct meshcntl_t { nd_uint8_t flags; nd_uint8_t ttl; nd_uint32_t seq; nd_mac_addr addr4; nd_mac_addr addr5; nd_mac_addr addr6; }; #define IV_IV(iv) ((iv) & 0xFFFFFF) #define IV_PAD(iv) (((iv) >> 24) & 0x3F) #define IV_KEYID(iv) (((iv) >> 30) & 0x03) #define PRINT_SSID(p) \ if (p.ssid_present) { \ ND_PRINT(" ("); \ fn_print_str(ndo, p.ssid.ssid); \ ND_PRINT(")"); \ } #define PRINT_RATE(_sep, _r, _suf) \ ND_PRINT("%s%2.1f%s", _sep, (.5 * ((_r) & 0x7f)), _suf) #define PRINT_RATES(p) \ if (p.rates_present) { \ int z; \ const char *sep = " ["; \ for (z = 0; z < p.rates.length ; z++) { \ PRINT_RATE(sep, p.rates.rate[z], \ (p.rates.rate[z] & 0x80 ? "*" : "")); \ sep = " "; \ } \ if (p.rates.length != 0) \ ND_PRINT(" Mbit]"); \ } #define PRINT_DS_CHANNEL(p) \ if (p.ds_present) \ ND_PRINT(" CH: %u", p.ds.channel); \ ND_PRINT("%s", \ CAPABILITY_PRIVACY(p.capability_info) ? ", PRIVACY" : ""); #define MAX_MCS_INDEX 76 /* * Indices are: * * the MCS index (0-76); * * 0 for 20 MHz, 1 for 40 MHz; * * 0 for a long guard interval, 1 for a short guard interval. */ static const float ieee80211_float_htrates[MAX_MCS_INDEX+1][2][2] = { /* MCS 0 */ { /* 20 Mhz */ { 6.5f, /* SGI */ 7.2f, }, /* 40 Mhz */ { 13.5f, /* SGI */ 15.0f, }, }, /* MCS 1 */ { /* 20 Mhz */ { 13.0f, /* SGI */ 14.4f, }, /* 40 Mhz */ { 27.0f, /* SGI */ 30.0f, }, }, /* MCS 2 */ { /* 20 Mhz */ { 19.5f, /* SGI */ 21.7f, }, /* 40 Mhz */ { 40.5f, /* SGI */ 45.0f, }, }, /* MCS 3 */ { /* 20 Mhz */ { 26.0f, /* SGI */ 28.9f, }, /* 40 Mhz */ { 54.0f, /* SGI */ 60.0f, }, }, /* MCS 4 */ { /* 20 Mhz */ { 39.0f, /* SGI */ 43.3f, }, /* 40 Mhz */ { 81.0f, /* SGI */ 90.0f, }, }, /* MCS 5 */ { /* 20 Mhz */ { 52.0f, /* SGI */ 57.8f, }, /* 40 Mhz */ { 108.0f, /* SGI */ 120.0f, }, }, /* MCS 6 */ { /* 20 Mhz */ { 58.5f, /* SGI */ 65.0f, }, /* 40 Mhz */ { 121.5f, /* SGI */ 135.0f, }, }, /* MCS 7 */ { /* 20 Mhz */ { 65.0f, /* SGI */ 72.2f, }, /* 40 Mhz */ { 135.0f, /* SGI */ 150.0f, }, }, /* MCS 8 */ { /* 20 Mhz */ { 13.0f, /* SGI */ 14.4f, }, /* 40 Mhz */ { 27.0f, /* SGI */ 30.0f, }, }, /* MCS 9 */ { /* 20 Mhz */ { 26.0f, /* SGI */ 28.9f, }, /* 40 Mhz */ { 54.0f, /* SGI */ 60.0f, }, }, /* MCS 10 */ { /* 20 Mhz */ { 39.0f, /* SGI */ 43.3f, }, /* 40 Mhz */ { 81.0f, /* SGI */ 90.0f, }, }, /* MCS 11 */ { /* 20 Mhz */ { 52.0f, /* SGI */ 57.8f, }, /* 40 Mhz */ { 108.0f, /* SGI */ 120.0f, }, }, /* MCS 12 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 13 */ { /* 20 Mhz */ { 104.0f, /* SGI */ 115.6f, }, /* 40 Mhz */ { 216.0f, /* SGI */ 240.0f, }, }, /* MCS 14 */ { /* 20 Mhz */ { 117.0f, /* SGI */ 130.0f, }, /* 40 Mhz */ { 243.0f, /* SGI */ 270.0f, }, }, /* MCS 15 */ { /* 20 Mhz */ { 130.0f, /* SGI */ 144.4f, }, /* 40 Mhz */ { 270.0f, /* SGI */ 300.0f, }, }, /* MCS 16 */ { /* 20 Mhz */ { 19.5f, /* SGI */ 21.7f, }, /* 40 Mhz */ { 40.5f, /* SGI */ 45.0f, }, }, /* MCS 17 */ { /* 20 Mhz */ { 39.0f, /* SGI */ 43.3f, }, /* 40 Mhz */ { 81.0f, /* SGI */ 90.0f, }, }, /* MCS 18 */ { /* 20 Mhz */ { 58.5f, /* SGI */ 65.0f, }, /* 40 Mhz */ { 121.5f, /* SGI */ 135.0f, }, }, /* MCS 19 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 20 */ { /* 20 Mhz */ { 117.0f, /* SGI */ 130.0f, }, /* 40 Mhz */ { 243.0f, /* SGI */ 270.0f, }, }, /* MCS 21 */ { /* 20 Mhz */ { 156.0f, /* SGI */ 173.3f, }, /* 40 Mhz */ { 324.0f, /* SGI */ 360.0f, }, }, /* MCS 22 */ { /* 20 Mhz */ { 175.5f, /* SGI */ 195.0f, }, /* 40 Mhz */ { 364.5f, /* SGI */ 405.0f, }, }, /* MCS 23 */ { /* 20 Mhz */ { 195.0f, /* SGI */ 216.7f, }, /* 40 Mhz */ { 405.0f, /* SGI */ 450.0f, }, }, /* MCS 24 */ { /* 20 Mhz */ { 26.0f, /* SGI */ 28.9f, }, /* 40 Mhz */ { 54.0f, /* SGI */ 60.0f, }, }, /* MCS 25 */ { /* 20 Mhz */ { 52.0f, /* SGI */ 57.8f, }, /* 40 Mhz */ { 108.0f, /* SGI */ 120.0f, }, }, /* MCS 26 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 27 */ { /* 20 Mhz */ { 104.0f, /* SGI */ 115.6f, }, /* 40 Mhz */ { 216.0f, /* SGI */ 240.0f, }, }, /* MCS 28 */ { /* 20 Mhz */ { 156.0f, /* SGI */ 173.3f, }, /* 40 Mhz */ { 324.0f, /* SGI */ 360.0f, }, }, /* MCS 29 */ { /* 20 Mhz */ { 208.0f, /* SGI */ 231.1f, }, /* 40 Mhz */ { 432.0f, /* SGI */ 480.0f, }, }, /* MCS 30 */ { /* 20 Mhz */ { 234.0f, /* SGI */ 260.0f, }, /* 40 Mhz */ { 486.0f, /* SGI */ 540.0f, }, }, /* MCS 31 */ { /* 20 Mhz */ { 260.0f, /* SGI */ 288.9f, }, /* 40 Mhz */ { 540.0f, /* SGI */ 600.0f, }, }, /* MCS 32 */ { /* 20 Mhz */ { 0.0f, /* SGI */ 0.0f, }, /* not valid */ /* 40 Mhz */ { 6.0f, /* SGI */ 6.7f, }, }, /* MCS 33 */ { /* 20 Mhz */ { 39.0f, /* SGI */ 43.3f, }, /* 40 Mhz */ { 81.0f, /* SGI */ 90.0f, }, }, /* MCS 34 */ { /* 20 Mhz */ { 52.0f, /* SGI */ 57.8f, }, /* 40 Mhz */ { 108.0f, /* SGI */ 120.0f, }, }, /* MCS 35 */ { /* 20 Mhz */ { 65.0f, /* SGI */ 72.2f, }, /* 40 Mhz */ { 135.0f, /* SGI */ 150.0f, }, }, /* MCS 36 */ { /* 20 Mhz */ { 58.5f, /* SGI */ 65.0f, }, /* 40 Mhz */ { 121.5f, /* SGI */ 135.0f, }, }, /* MCS 37 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 38 */ { /* 20 Mhz */ { 97.5f, /* SGI */ 108.3f, }, /* 40 Mhz */ { 202.5f, /* SGI */ 225.0f, }, }, /* MCS 39 */ { /* 20 Mhz */ { 52.0f, /* SGI */ 57.8f, }, /* 40 Mhz */ { 108.0f, /* SGI */ 120.0f, }, }, /* MCS 40 */ { /* 20 Mhz */ { 65.0f, /* SGI */ 72.2f, }, /* 40 Mhz */ { 135.0f, /* SGI */ 150.0f, }, }, /* MCS 41 */ { /* 20 Mhz */ { 65.0f, /* SGI */ 72.2f, }, /* 40 Mhz */ { 135.0f, /* SGI */ 150.0f, }, }, /* MCS 42 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 43 */ { /* 20 Mhz */ { 91.0f, /* SGI */ 101.1f, }, /* 40 Mhz */ { 189.0f, /* SGI */ 210.0f, }, }, /* MCS 44 */ { /* 20 Mhz */ { 91.0f, /* SGI */ 101.1f, }, /* 40 Mhz */ { 189.0f, /* SGI */ 210.0f, }, }, /* MCS 45 */ { /* 20 Mhz */ { 104.0f, /* SGI */ 115.6f, }, /* 40 Mhz */ { 216.0f, /* SGI */ 240.0f, }, }, /* MCS 46 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 47 */ { /* 20 Mhz */ { 97.5f, /* SGI */ 108.3f, }, /* 40 Mhz */ { 202.5f, /* SGI */ 225.0f, }, }, /* MCS 48 */ { /* 20 Mhz */ { 97.5f, /* SGI */ 108.3f, }, /* 40 Mhz */ { 202.5f, /* SGI */ 225.0f, }, }, /* MCS 49 */ { /* 20 Mhz */ { 117.0f, /* SGI */ 130.0f, }, /* 40 Mhz */ { 243.0f, /* SGI */ 270.0f, }, }, /* MCS 50 */ { /* 20 Mhz */ { 136.5f, /* SGI */ 151.7f, }, /* 40 Mhz */ { 283.5f, /* SGI */ 315.0f, }, }, /* MCS 51 */ { /* 20 Mhz */ { 136.5f, /* SGI */ 151.7f, }, /* 40 Mhz */ { 283.5f, /* SGI */ 315.0f, }, }, /* MCS 52 */ { /* 20 Mhz */ { 156.0f, /* SGI */ 173.3f, }, /* 40 Mhz */ { 324.0f, /* SGI */ 360.0f, }, }, /* MCS 53 */ { /* 20 Mhz */ { 65.0f, /* SGI */ 72.2f, }, /* 40 Mhz */ { 135.0f, /* SGI */ 150.0f, }, }, /* MCS 54 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 55 */ { /* 20 Mhz */ { 91.0f, /* SGI */ 101.1f, }, /* 40 Mhz */ { 189.0f, /* SGI */ 210.0f, }, }, /* MCS 56 */ { /* 20 Mhz */ { 78.0f, /* SGI */ 86.7f, }, /* 40 Mhz */ { 162.0f, /* SGI */ 180.0f, }, }, /* MCS 57 */ { /* 20 Mhz */ { 91.0f, /* SGI */ 101.1f, }, /* 40 Mhz */ { 189.0f, /* SGI */ 210.0f, }, }, /* MCS 58 */ { /* 20 Mhz */ { 104.0f, /* SGI */ 115.6f, }, /* 40 Mhz */ { 216.0f, /* SGI */ 240.0f, }, }, /* MCS 59 */ { /* 20 Mhz */ { 117.0f, /* SGI */ 130.0f, }, /* 40 Mhz */ { 243.0f, /* SGI */ 270.0f, }, }, /* MCS 60 */ { /* 20 Mhz */ { 104.0f, /* SGI */ 115.6f, }, /* 40 Mhz */ { 216.0f, /* SGI */ 240.0f, }, }, /* MCS 61 */ { /* 20 Mhz */ { 117.0f, /* SGI */ 130.0f, }, /* 40 Mhz */ { 243.0f, /* SGI */ 270.0f, }, }, /* MCS 62 */ { /* 20 Mhz */ { 130.0f, /* SGI */ 144.4f, }, /* 40 Mhz */ { 270.0f, /* SGI */ 300.0f, }, }, /* MCS 63 */ { /* 20 Mhz */ { 130.0f, /* SGI */ 144.4f, }, /* 40 Mhz */ { 270.0f, /* SGI */ 300.0f, }, }, /* MCS 64 */ { /* 20 Mhz */ { 143.0f, /* SGI */ 158.9f, }, /* 40 Mhz */ { 297.0f, /* SGI */ 330.0f, }, }, /* MCS 65 */ { /* 20 Mhz */ { 97.5f, /* SGI */ 108.3f, }, /* 40 Mhz */ { 202.5f, /* SGI */ 225.0f, }, }, /* MCS 66 */ { /* 20 Mhz */ { 117.0f, /* SGI */ 130.0f, }, /* 40 Mhz */ { 243.0f, /* SGI */ 270.0f, }, }, /* MCS 67 */ { /* 20 Mhz */ { 136.5f, /* SGI */ 151.7f, }, /* 40 Mhz */ { 283.5f, /* SGI */ 315.0f, }, }, /* MCS 68 */ { /* 20 Mhz */ { 117.0f, /* SGI */ 130.0f, }, /* 40 Mhz */ { 243.0f, /* SGI */ 270.0f, }, }, /* MCS 69 */ { /* 20 Mhz */ { 136.5f, /* SGI */ 151.7f, }, /* 40 Mhz */ { 283.5f, /* SGI */ 315.0f, }, }, /* MCS 70 */ { /* 20 Mhz */ { 156.0f, /* SGI */ 173.3f, }, /* 40 Mhz */ { 324.0f, /* SGI */ 360.0f, }, }, /* MCS 71 */ { /* 20 Mhz */ { 175.5f, /* SGI */ 195.0f, }, /* 40 Mhz */ { 364.5f, /* SGI */ 405.0f, }, }, /* MCS 72 */ { /* 20 Mhz */ { 156.0f, /* SGI */ 173.3f, }, /* 40 Mhz */ { 324.0f, /* SGI */ 360.0f, }, }, /* MCS 73 */ { /* 20 Mhz */ { 175.5f, /* SGI */ 195.0f, }, /* 40 Mhz */ { 364.5f, /* SGI */ 405.0f, }, }, /* MCS 74 */ { /* 20 Mhz */ { 195.0f, /* SGI */ 216.7f, }, /* 40 Mhz */ { 405.0f, /* SGI */ 450.0f, }, }, /* MCS 75 */ { /* 20 Mhz */ { 195.0f, /* SGI */ 216.7f, }, /* 40 Mhz */ { 405.0f, /* SGI */ 450.0f, }, }, /* MCS 76 */ { /* 20 Mhz */ { 214.5f, /* SGI */ 238.3f, }, /* 40 Mhz */ { 445.5f, /* SGI */ 495.0f, }, }, }; static const char *auth_alg_text[]={"Open System","Shared Key","EAP"}; #define NUM_AUTH_ALGS (sizeof(auth_alg_text) / sizeof(auth_alg_text[0])) static const char *status_text[] = { "Successful", /* 0 */ "Unspecified failure", /* 1 */ "TDLS wakeup schedule rejected but alternative schedule " "provided", /* 2 */ "TDLS wakeup schedule rejected",/* 3 */ "Reserved", /* 4 */ "Security disabled", /* 5 */ "Unacceptable lifetime", /* 6 */ "Not in same BSS", /* 7 */ "Reserved", /* 8 */ "Reserved", /* 9 */ "Cannot Support all requested capabilities in the Capability " "Information field", /* 10 */ "Reassociation denied due to inability to confirm that association " "exists", /* 11 */ "Association denied due to reason outside the scope of this " "standard", /* 12 */ "Responding STA does not support the specified authentication " "algorithm", /* 13 */ "Received an Authentication frame with authentication transaction " "sequence number out of expected sequence", /* 14 */ "Authentication rejected because of challenge failure", /* 15 */ "Authentication rejected due to timeout waiting for next frame in " "sequence", /* 16 */ "Association denied because AP is unable to handle " "additional associated STAs", /* 17 */ "Association denied due to requesting STA not supporting " "all of the data rates in the BSSBasicRateSet parameter, " "the Basic HT-MCS Set field of the HT Operation " "parameter, or the Basic VHT-MCS and NSS Set field in " "the VHT Operation parameter", /* 18 */ "Association denied due to requesting STA not supporting " "the short preamble option", /* 19 */ "Reserved", /* 20 */ "Reserved", /* 21 */ "Association request rejected because Spectrum Management " "capability is required", /* 22 */ "Association request rejected because the information in the " "Power Capability element is unacceptable", /* 23 */ "Association request rejected because the information in the " "Supported Channels element is unacceptable", /* 24 */ "Association denied due to requesting STA not supporting " "the Short Slot Time option", /* 25 */ "Reserved", /* 26 */ "Association denied because the requested STA does not support HT " "features", /* 27 */ "R0KH unreachable", /* 28 */ "Association denied because the requesting STA does not " "support the phased coexistence operation (PCO) " "transition time required by the AP", /* 29 */ "Association request rejected temporarily; try again " "later", /* 30 */ "Robust management frame policy violation", /* 31 */ "Unspecified, QoS-related failure", /* 32 */ "Association denied because QoS AP or PCP has " "insufficient bandwidth to handle another QoS " "STA", /* 33 */ "Association denied due to excessive frame loss rates and/or " "poor conditions on current operating channel", /* 34 */ "Association (with QoS BSS) denied because the requesting STA " "does not support the QoS facility", /* 35 */ "Reserved", /* 36 */ "The request has been declined", /* 37 */ "The request has not been successful as one or more parameters " "have invalid values", /* 38 */ "The allocation or TS has not been created because the request " "cannot be honored; however, a suggested TSPEC/DMG TSPEC is " "provided so that the initiating STA can attempt to set " "another allocation or TS with the suggested changes to the " "TSPEC/DMG TSPEC", /* 39 */ "Invalid element, i.e., an element defined in this standard " "for which the content does not meet the specifications in " "Clause 9", /* 40 */ "Invalid group cipher", /* 41 */ "Invalid pairwise cipher", /* 42 */ "Invalid AKMP", /* 43 */ "Unsupported RSNE version", /* 44 */ "Invalid RSNE capabilities", /* 45 */ "Cipher suite rejected because of security policy", /* 46 */ "The TS or allocation has not been created; however, the " "HC or PCP might be capable of creating a TS or " "allocation, in response to a request, after the time " "indicated in the TS Delay element", /* 47 */ "Direct Link is not allowed in the BSS by policy", /* 48 */ "The Destination STA is not present within this BSS", /* 49 */ "The Destination STA is not a QoS STA", /* 50 */ "Association denied because the listen interval is " "too large", /* 51 */ "Invalid FT Action frame count", /* 52 */ "Invalid pairwise master key identifier (PMKID)", /* 53 */ "Invalid MDE", /* 54 */ "Invalid FTE", /* 55 */ "Requested TCLAS processing is not supported by the AP " "or PCP", /* 56 */ "The AP or PCP has insufficient TCLAS processing " "resources to satisfy the request", /* 57 */ "The TS has not been created because the request " "cannot be honored; however, the HC or PCP suggests " "that the STA transition to a different BSS to set up " "the TS", /* 58 */ "GAS Advertisement Protocol not supported", /* 59 */ "No outstanding GAS request", /* 60 */ "GAS Response not received from the Advertisement " "Server", /* 61 */ "STA timed out waiting for GAS Query Response", /* 62 */ "LARGE GAS Response is larger than query response " "length limit", /* 63 */ "Request refused because home network does not support " "request", /* 64 */ "Advertisement Server in the network is not currently " "reachable", /* 65 */ "Reserved", /* 66 */ "Request refused due to permissions received via SSPN " "interface", /* 67 */ "Request refused because the AP or PCP does not " "support unauthenticated access", /* 68 */ "Reserved", /* 69 */ "Reserved", /* 70 */ "Reserved", /* 71 */ "Invalid contents of RSNE", /* 72 */ "U-APSD coexistence is not supported", /* 73 */ "Requested U-APSD coexistence mode is not supported", /* 74 */ "Requested Interval/Duration value cannot be " "supported with U-APSD coexistence", /* 75 */ "Authentication is rejected because an Anti-Clogging " "Token is required", /* 76 */ "Authentication is rejected because the offered " "finite cyclic group is not supported", /* 77 */ "The TBTT adjustment request has not been successful " "because the STA could not find an alternative TBTT", /* 78 */ "Transmission failure", /* 79 */ "Requested TCLAS Not Supported", /* 80 */ "TCLAS Resources Exhausted", /* 81 */ "Rejected with Suggested BSS transition", /* 82 */ "Reject with recommended schedule", /* 83 */ "Reject because no wakeup schedule specified", /* 84 */ "Success, the destination STA is in power save mode", /* 85 */ "FST pending, in process of admitting FST session", /* 86 */ "Performing FST now", /* 87 */ "FST pending, gap(s) in block ack window", /* 88 */ "Reject because of U-PID setting", /* 89 */ "Reserved", /* 90 */ "Reserved", /* 91 */ "(Re)Association refused for some external reason", /* 92 */ "(Re)Association refused because of memory limits " "at the AP", /* 93 */ "(Re)Association refused because emergency services " "are not supported at the AP", /* 94 */ "GAS query response not yet received", /* 95 */ "Reject since the request is for transition to a " "frequency band subject to DSE procedures and " "FST Initiator is a dependent STA", /* 96 */ "Requested TCLAS processing has been terminated by " "the AP", /* 97 */ "The TS schedule conflicts with an existing " "schedule; an alternative schedule is provided", /* 98 */ "The association has been denied; however, one or " "more Multi-band elements are included that can " "be used by the receiving STA to join the BSS", /* 99 */ "The request failed due to a reservation conflict", /* 100 */ "The request failed due to exceeded MAF limit", /* 101 */ "The request failed due to exceeded MCCA track " "limit", /* 102 */ "Association denied because the information in the" "Spectrum Management field is unacceptable", /* 103 */ "Association denied because the requesting STA " "does not support VHT features", /* 104 */ "Enablement denied", /* 105 */ "Enablement denied due to restriction from an " "authorized GDB", /* 106 */ "Authorization deenabled", /* 107 */ }; #define NUM_STATUSES (sizeof(status_text) / sizeof(status_text[0])) static const char *reason_text[] = { "Reserved", /* 0 */ "Unspecified reason", /* 1 */ "Previous authentication no longer valid", /* 2 */ "Deauthenticated because sending STA is leaving (or has left) " "IBSS or ESS", /* 3 */ "Disassociated due to inactivity", /* 4 */ "Disassociated because AP is unable to handle all currently " " associated STAs", /* 5 */ "Class 2 frame received from nonauthenticated STA", /* 6 */ "Class 3 frame received from nonassociated STA", /* 7 */ "Disassociated because sending STA is leaving " "(or has left) BSS", /* 8 */ "STA requesting (re)association is not authenticated with " "responding STA", /* 9 */ "Disassociated because the information in the Power Capability " "element is unacceptable", /* 10 */ "Disassociated because the information in the Supported Channels " "element is unacceptable", /* 11 */ "Disassociated due to BSS transition management", /* 12 */ "Invalid element, i.e., an element defined in this standard for " "which the content does not meet the specifications " "in Clause 9", /* 13 */ "Message integrity code (MIC) failure", /* 14 */ "4-Way Handshake timeout", /* 15 */ "Group key handshake timeout", /* 16 */ "Information element in 4-Way Handshake different from (Re)Association" "Request/Probe Response/Beacon frame", /* 17 */ "Invalid group cipher", /* 18 */ "Invalid pairwise cipher", /* 19 */ "Invalid AKMP", /* 20 */ "Unsupported RSNE version", /* 21 */ "Invalid RSNE capabilities", /* 22 */ "IEEE 802.1X authentication failed", /* 23 */ "Cipher suite rejected because of the security policy", /* 24 */ "TDLS direct-link teardown due to TDLS peer STA " "unreachable via the TDLS direct link", /* 25 */ "TDLS direct-link teardown for unspecified reason", /* 26 */ "Disassociated because session terminated by SSP request",/* 27 */ "Disassociated because of lack of SSP roaming agreement",/* 28 */ "Requested service rejected because of SSP cipher suite or " "AKM requirement", /* 29 */ "Requested service not authorized in this location", /* 30 */ "TS deleted because QoS AP lacks sufficient bandwidth for this " "QoS STA due to a change in BSS service characteristics or " "operational mode (e.g. an HT BSS change from 40 MHz channel " "to 20 MHz channel)", /* 31 */ "Disassociated for unspecified, QoS-related reason", /* 32 */ "Disassociated because QoS AP lacks sufficient bandwidth for this " "QoS STA", /* 33 */ "Disassociated because of excessive number of frames that need to be " "acknowledged, but are not acknowledged due to AP transmissions " "and/or poor channel conditions", /* 34 */ "Disassociated because STA is transmitting outside the limits " "of its TXOPs", /* 35 */ "Requested from peer STA as the STA is leaving the BSS " "(or resetting)", /* 36 */ "Requested from peer STA as it does not want to use the " "mechanism", /* 37 */ "Requested from peer STA as the STA received frames using the " "mechanism for which a set up is required", /* 38 */ "Requested from peer STA due to time out", /* 39 */ "Reserved", /* 40 */ "Reserved", /* 41 */ "Reserved", /* 42 */ "Reserved", /* 43 */ "Reserved", /* 44 */ "Peer STA does not support the requested cipher suite", /* 45 */ "In a DLS Teardown frame: The teardown was initiated by the " "DLS peer. In a Disassociation frame: Disassociated because " "authorized access limit reached", /* 46 */ "In a DLS Teardown frame: The teardown was initiated by the " "AP. In a Disassociation frame: Disassociated due to external " "service requirements", /* 47 */ "Invalid FT Action frame count", /* 48 */ "Invalid pairwise master key identifier (PMKID)", /* 49 */ "Invalid MDE", /* 50 */ "Invalid FTE", /* 51 */ "Mesh peering canceled for unknown reasons", /* 52 */ "The mesh STA has reached the supported maximum number of " "peer mesh STAs", /* 53 */ "The received information violates the Mesh Configuration " "policy configured in the mesh STA profile", /* 54 */ "The mesh STA has received a Mesh Peering Close frame " "requesting to close the mesh peering", /* 55 */ "The mesh STA has resent dot11MeshMaxRetries Mesh " "Peering Open frames, without receiving a Mesh Peering " "Confirm frame", /* 56 */ "The confirmTimer for the mesh peering instance times out", /* 57 */ "The mesh STA fails to unwrap the GTK or the values in the " "wrapped contents do not match", /* 58 */ "The mesh STA receives inconsistent information about the " "mesh parameters between mesh peering Management frames", /* 59 */ "The mesh STA fails the authenticated mesh peering exchange " "because due to failure in selecting either the pairwise " "ciphersuite or group ciphersuite", /* 60 */ "The mesh STA does not have proxy information for this " "external destination", /* 61 */ "The mesh STA does not have forwarding information for this " "destination", /* 62 */ "The mesh STA determines that the link to the next hop of an " "active path in its forwarding information is no longer " "usable", /* 63 */ "The Deauthentication frame was sent because the MAC " "address of the STA already exists in the mesh BSS", /* 64 */ "The mesh STA performs channel switch to meet regulatory " "requirements", /* 65 */ "The mesh STA performs channel switching with unspecified " "reason", /* 66 */ }; #define NUM_REASONS (sizeof(reason_text) / sizeof(reason_text[0])) static int wep_print(netdissect_options *ndo, const u_char *p) { uint32_t iv; ND_TCHECK_LEN(p, IEEE802_11_IV_LEN + IEEE802_11_KID_LEN); iv = GET_LE_U_4(p); ND_PRINT(" IV:%3x Pad %x KeyID %x", IV_IV(iv), IV_PAD(iv), IV_KEYID(iv)); return 1; trunc: return 0; } static int parse_elements(netdissect_options *ndo, struct mgmt_body_t *pbody, const u_char *p, int offset, u_int length) { u_int elementlen; struct ssid_t ssid; struct challenge_t challenge; struct rates_t rates; struct ds_t ds; struct cf_t cf; struct tim_t tim; /* * We haven't seen any elements yet. */ pbody->challenge_present = 0; pbody->ssid_present = 0; pbody->rates_present = 0; pbody->ds_present = 0; pbody->cf_present = 0; pbody->tim_present = 0; while (length != 0) { /* Make sure we at least have the element ID and length. */ ND_TCHECK_2(p + offset); if (length < 2) goto trunc; elementlen = GET_U_1(p + offset + 1); /* Make sure we have the entire element. */ ND_TCHECK_LEN(p + offset + 2, elementlen); if (length < elementlen + 2) goto trunc; switch (GET_U_1(p + offset)) { case E_SSID: memcpy(&ssid, p + offset, 2); offset += 2; length -= 2; if (ssid.length != 0) { if (ssid.length > sizeof(ssid.ssid) - 1) return 0; memcpy(&ssid.ssid, p + offset, ssid.length); offset += ssid.length; length -= ssid.length; } ssid.ssid[ssid.length] = '\0'; /* * Present and not truncated. * * If we haven't already seen an SSID IE, * copy this one, otherwise ignore this one, * so we later report the first one we saw. */ if (!pbody->ssid_present) { pbody->ssid = ssid; pbody->ssid_present = 1; } break; case E_CHALLENGE: memcpy(&challenge, p + offset, 2); offset += 2; length -= 2; if (challenge.length != 0) { if (challenge.length > sizeof(challenge.text) - 1) return 0; memcpy(&challenge.text, p + offset, challenge.length); offset += challenge.length; length -= challenge.length; } challenge.text[challenge.length] = '\0'; /* * Present and not truncated. * * If we haven't already seen a challenge IE, * copy this one, otherwise ignore this one, * so we later report the first one we saw. */ if (!pbody->challenge_present) { pbody->challenge = challenge; pbody->challenge_present = 1; } break; case E_RATES: memcpy(&rates, p + offset, 2); offset += 2; length -= 2; if (rates.length != 0) { if (rates.length > sizeof(rates.rate)) return 0; memcpy(&rates.rate, p + offset, rates.length); offset += rates.length; length -= rates.length; } /* * Present and not truncated. * * If we haven't already seen a rates IE, * copy this one if it's not zero-length, * otherwise ignore this one, so we later * report the first one we saw. * * We ignore zero-length rates IEs as some * devices seem to put a zero-length rates * IE, followed by an SSID IE, followed by * a non-zero-length rates IE into frames, * even though IEEE Std 802.11-2007 doesn't * seem to indicate that a zero-length rates * IE is valid. */ if (!pbody->rates_present && rates.length != 0) { pbody->rates = rates; pbody->rates_present = 1; } break; case E_DS: memcpy(&ds, p + offset, 2); offset += 2; length -= 2; if (ds.length != 1) { offset += ds.length; length -= ds.length; break; } ds.channel = GET_U_1(p + offset); offset += 1; length -= 1; /* * Present and not truncated. * * If we haven't already seen a DS IE, * copy this one, otherwise ignore this one, * so we later report the first one we saw. */ if (!pbody->ds_present) { pbody->ds = ds; pbody->ds_present = 1; } break; case E_CF: memcpy(&cf, p + offset, 2); offset += 2; length -= 2; if (cf.length != 6) { offset += cf.length; length -= cf.length; break; } cf.count = GET_U_1(p + offset); offset += 1; length -= 1; cf.period = GET_U_1(p + offset); offset += 1; length -= 1; cf.max_duration = GET_LE_U_2(p + offset); offset += 2; length -= 2; cf.dur_remaining = GET_LE_U_2(p + offset); offset += 2; length -= 2; /* * Present and not truncated. * * If we haven't already seen a CF IE, * copy this one, otherwise ignore this one, * so we later report the first one we saw. */ if (!pbody->cf_present) { pbody->cf = cf; pbody->cf_present = 1; } break; case E_TIM: memcpy(&tim, p + offset, 2); offset += 2; length -= 2; if (tim.length <= 3U) { offset += tim.length; length -= tim.length; break; } if (tim.length - 3U > sizeof(tim.bitmap)) return 0; tim.count = GET_U_1(p + offset); offset += 1; length -= 1; tim.period = GET_U_1(p + offset); offset += 1; length -= 1; tim.bitmap_control = GET_U_1(p + offset); offset += 1; length -= 1; memcpy(tim.bitmap, p + offset, tim.length - 3); offset += tim.length - 3; length -= tim.length - 3; /* * Present and not truncated. * * If we haven't already seen a TIM IE, * copy this one, otherwise ignore this one, * so we later report the first one we saw. */ if (!pbody->tim_present) { pbody->tim = tim; pbody->tim_present = 1; } break; default: #if 0 ND_PRINT("(1) unhandled element_id (%u) ", GET_U_1(p + offset)); #endif offset += 2 + elementlen; length -= 2 + elementlen; break; } } /* No problems found. */ return 1; trunc: return 0; } /********************************************************************************* * Print Handle functions for the management frame types *********************************************************************************/ static int handle_beacon(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; int offset = 0; int ret; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_LEN(p, IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + IEEE802_11_CAPINFO_LEN); if (length < IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + IEEE802_11_CAPINFO_LEN) goto trunc; memcpy(&pbody.timestamp, p, IEEE802_11_TSTAMP_LEN); offset += IEEE802_11_TSTAMP_LEN; length -= IEEE802_11_TSTAMP_LEN; pbody.beacon_interval = GET_LE_U_2(p + offset); offset += IEEE802_11_BCNINT_LEN; length -= IEEE802_11_BCNINT_LEN; pbody.capability_info = GET_LE_U_2(p + offset); offset += IEEE802_11_CAPINFO_LEN; length -= IEEE802_11_CAPINFO_LEN; ret = parse_elements(ndo, &pbody, p, offset, length); PRINT_SSID(pbody); PRINT_RATES(pbody); ND_PRINT(" %s", CAPABILITY_ESS(pbody.capability_info) ? "ESS" : "IBSS"); PRINT_DS_CHANNEL(pbody); return ret; trunc: return 0; } static int handle_assoc_request(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; int offset = 0; int ret; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_LEN(p, IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN); if (length < IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN) goto trunc; pbody.capability_info = GET_LE_U_2(p); offset += IEEE802_11_CAPINFO_LEN; length -= IEEE802_11_CAPINFO_LEN; pbody.listen_interval = GET_LE_U_2(p + offset); offset += IEEE802_11_LISTENINT_LEN; length -= IEEE802_11_LISTENINT_LEN; ret = parse_elements(ndo, &pbody, p, offset, length); PRINT_SSID(pbody); PRINT_RATES(pbody); return ret; trunc: return 0; } static int handle_assoc_response(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; int offset = 0; int ret; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_LEN(p, IEEE802_11_CAPINFO_LEN + IEEE802_11_STATUS_LEN + IEEE802_11_AID_LEN); if (length < IEEE802_11_CAPINFO_LEN + IEEE802_11_STATUS_LEN + IEEE802_11_AID_LEN) goto trunc; pbody.capability_info = GET_LE_U_2(p); offset += IEEE802_11_CAPINFO_LEN; length -= IEEE802_11_CAPINFO_LEN; pbody.status_code = GET_LE_U_2(p + offset); offset += IEEE802_11_STATUS_LEN; length -= IEEE802_11_STATUS_LEN; pbody.aid = GET_LE_U_2(p + offset); offset += IEEE802_11_AID_LEN; length -= IEEE802_11_AID_LEN; ret = parse_elements(ndo, &pbody, p, offset, length); ND_PRINT(" AID(%x) :%s: %s", ((uint16_t)(pbody.aid << 2 )) >> 2 , CAPABILITY_PRIVACY(pbody.capability_info) ? " PRIVACY " : "", (pbody.status_code < NUM_STATUSES ? status_text[pbody.status_code] : "n/a")); return ret; trunc: return 0; } static int handle_reassoc_request(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; int offset = 0; int ret; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_LEN(p, IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN + IEEE802_11_AP_LEN); if (length < IEEE802_11_CAPINFO_LEN + IEEE802_11_LISTENINT_LEN + IEEE802_11_AP_LEN) goto trunc; pbody.capability_info = GET_LE_U_2(p); offset += IEEE802_11_CAPINFO_LEN; length -= IEEE802_11_CAPINFO_LEN; pbody.listen_interval = GET_LE_U_2(p + offset); offset += IEEE802_11_LISTENINT_LEN; length -= IEEE802_11_LISTENINT_LEN; memcpy(&pbody.ap, p+offset, IEEE802_11_AP_LEN); offset += IEEE802_11_AP_LEN; length -= IEEE802_11_AP_LEN; ret = parse_elements(ndo, &pbody, p, offset, length); PRINT_SSID(pbody); ND_PRINT(" AP : %s", etheraddr_string(ndo, pbody.ap )); return ret; trunc: return 0; } static int handle_reassoc_response(netdissect_options *ndo, const u_char *p, u_int length) { /* Same as a Association Response */ return handle_assoc_response(ndo, p, length); } static int handle_probe_request(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; int offset = 0; int ret; memset(&pbody, 0, sizeof(pbody)); ret = parse_elements(ndo, &pbody, p, offset, length); PRINT_SSID(pbody); PRINT_RATES(pbody); return ret; } static int handle_probe_response(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; int offset = 0; int ret; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_LEN(p, IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + IEEE802_11_CAPINFO_LEN); if (length < IEEE802_11_TSTAMP_LEN + IEEE802_11_BCNINT_LEN + IEEE802_11_CAPINFO_LEN) goto trunc; memcpy(&pbody.timestamp, p, IEEE802_11_TSTAMP_LEN); offset += IEEE802_11_TSTAMP_LEN; length -= IEEE802_11_TSTAMP_LEN; pbody.beacon_interval = GET_LE_U_2(p + offset); offset += IEEE802_11_BCNINT_LEN; length -= IEEE802_11_BCNINT_LEN; pbody.capability_info = GET_LE_U_2(p + offset); offset += IEEE802_11_CAPINFO_LEN; length -= IEEE802_11_CAPINFO_LEN; ret = parse_elements(ndo, &pbody, p, offset, length); PRINT_SSID(pbody); PRINT_RATES(pbody); PRINT_DS_CHANNEL(pbody); return ret; trunc: return 0; } static int handle_atim(void) { /* the frame body for ATIM is null. */ return 1; } static int handle_disassoc(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_LEN(p, IEEE802_11_REASON_LEN); if (length < IEEE802_11_REASON_LEN) goto trunc; pbody.reason_code = GET_LE_U_2(p); ND_PRINT(": %s", (pbody.reason_code < NUM_REASONS) ? reason_text[pbody.reason_code] : "Reserved"); return 1; trunc: return 0; } static int handle_auth(netdissect_options *ndo, const u_char *p, u_int length) { struct mgmt_body_t pbody; int offset = 0; int ret; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_6(p); if (length < 6) goto trunc; pbody.auth_alg = GET_LE_U_2(p); offset += 2; length -= 2; pbody.auth_trans_seq_num = GET_LE_U_2(p + offset); offset += 2; length -= 2; pbody.status_code = GET_LE_U_2(p + offset); offset += 2; length -= 2; ret = parse_elements(ndo, &pbody, p, offset, length); if ((pbody.auth_alg == 1) && ((pbody.auth_trans_seq_num == 2) || (pbody.auth_trans_seq_num == 3))) { ND_PRINT(" (%s)-%x [Challenge Text] %s", (pbody.auth_alg < NUM_AUTH_ALGS) ? auth_alg_text[pbody.auth_alg] : "Reserved", pbody.auth_trans_seq_num, ((pbody.auth_trans_seq_num % 2) ? ((pbody.status_code < NUM_STATUSES) ? status_text[pbody.status_code] : "n/a") : "")); return ret; } ND_PRINT(" (%s)-%x: %s", (pbody.auth_alg < NUM_AUTH_ALGS) ? auth_alg_text[pbody.auth_alg] : "Reserved", pbody.auth_trans_seq_num, (pbody.auth_trans_seq_num % 2) ? ((pbody.status_code < NUM_STATUSES) ? status_text[pbody.status_code] : "n/a") : ""); return ret; trunc: return 0; } static int handle_deauth(netdissect_options *ndo, const uint8_t *src, const u_char *p, u_int length) { struct mgmt_body_t pbody; const char *reason = NULL; memset(&pbody, 0, sizeof(pbody)); ND_TCHECK_LEN(p, IEEE802_11_REASON_LEN); if (length < IEEE802_11_REASON_LEN) goto trunc; pbody.reason_code = GET_LE_U_2(p); reason = (pbody.reason_code < NUM_REASONS) ? reason_text[pbody.reason_code] : "Reserved"; if (ndo->ndo_eflag) { ND_PRINT(": %s", reason); } else { ND_PRINT(" (%s): %s", GET_ETHERADDR_STRING(src), reason); } return 1; trunc: return 0; } #define PRINT_HT_ACTION(v) (\ (v) == 0 ? ND_PRINT("TxChWidth"): \ (v) == 1 ? ND_PRINT("MIMOPwrSave"): \ ND_PRINT("Act#%u", (v))) #define PRINT_BA_ACTION(v) (\ (v) == 0 ? ND_PRINT("ADDBA Request"): \ (v) == 1 ? ND_PRINT("ADDBA Response"): \ (v) == 2 ? ND_PRINT("DELBA"): \ ND_PRINT("Act#%u", (v))) #define PRINT_MESHLINK_ACTION(v) (\ (v) == 0 ? ND_PRINT("Request"): \ (v) == 1 ? ND_PRINT("Report"): \ ND_PRINT("Act#%u", (v))) #define PRINT_MESHPEERING_ACTION(v) (\ (v) == 0 ? ND_PRINT("Open"): \ (v) == 1 ? ND_PRINT("Confirm"): \ (v) == 2 ? ND_PRINT("Close"): \ ND_PRINT("Act#%u", (v))) #define PRINT_MESHPATH_ACTION(v) (\ (v) == 0 ? ND_PRINT("Request"): \ (v) == 1 ? ND_PRINT("Report"): \ (v) == 2 ? ND_PRINT("Error"): \ (v) == 3 ? ND_PRINT("RootAnnouncement"): \ ND_PRINT("Act#%u", (v))) #define PRINT_MESH_ACTION(v) (\ (v) == 0 ? ND_PRINT("MeshLink"): \ (v) == 1 ? ND_PRINT("HWMP"): \ (v) == 2 ? ND_PRINT("Gate Announcement"): \ (v) == 3 ? ND_PRINT("Congestion Control"): \ (v) == 4 ? ND_PRINT("MCCA Setup Request"): \ (v) == 5 ? ND_PRINT("MCCA Setup Reply"): \ (v) == 6 ? ND_PRINT("MCCA Advertisement Request"): \ (v) == 7 ? ND_PRINT("MCCA Advertisement"): \ (v) == 8 ? ND_PRINT("MCCA Teardown"): \ (v) == 9 ? ND_PRINT("TBTT Adjustment Request"): \ (v) == 10 ? ND_PRINT("TBTT Adjustment Response"): \ ND_PRINT("Act#%u", (v))) #define PRINT_MULTIHOP_ACTION(v) (\ (v) == 0 ? ND_PRINT("Proxy Update"): \ (v) == 1 ? ND_PRINT("Proxy Update Confirmation"): \ ND_PRINT("Act#%u", (v))) #define PRINT_SELFPROT_ACTION(v) (\ (v) == 1 ? ND_PRINT("Peering Open"): \ (v) == 2 ? ND_PRINT("Peering Confirm"): \ (v) == 3 ? ND_PRINT("Peering Close"): \ (v) == 4 ? ND_PRINT("Group Key Inform"): \ (v) == 5 ? ND_PRINT("Group Key Acknowledge"): \ ND_PRINT("Act#%u", (v))) static int handle_action(netdissect_options *ndo, const uint8_t *src, const u_char *p, u_int length) { ND_TCHECK_2(p); if (length < 2) goto trunc; if (ndo->ndo_eflag) { ND_PRINT(": "); } else { ND_PRINT(" (%s): ", GET_ETHERADDR_STRING(src)); } switch (GET_U_1(p)) { case 0: ND_PRINT("Spectrum Management Act#%u", GET_U_1(p + 1)); break; case 1: ND_PRINT("QoS Act#%u", GET_U_1(p + 1)); break; case 2: ND_PRINT("DLS Act#%u", GET_U_1(p + 1)); break; case 3: ND_PRINT("BA "); PRINT_BA_ACTION(GET_U_1(p + 1)); break; case 7: ND_PRINT("HT "); PRINT_HT_ACTION(GET_U_1(p + 1)); break; case 13: ND_PRINT("MeshAction "); PRINT_MESH_ACTION(GET_U_1(p + 1)); break; case 14: ND_PRINT("MultiohopAction "); PRINT_MULTIHOP_ACTION(GET_U_1(p + 1)); break; case 15: ND_PRINT("SelfprotectAction "); PRINT_SELFPROT_ACTION(GET_U_1(p + 1)); break; case 127: ND_PRINT("Vendor Act#%u", GET_U_1(p + 1)); break; default: ND_PRINT("Reserved(%u) Act#%u", GET_U_1(p), GET_U_1(p + 1)); break; } return 1; trunc: return 0; } /********************************************************************************* * Print Body funcs *********************************************************************************/ static int mgmt_body_print(netdissect_options *ndo, uint16_t fc, const uint8_t *src, const u_char *p, u_int length) { ND_PRINT("%s", tok2str(st_str, "Unhandled Management subtype(%x)", FC_SUBTYPE(fc))); /* There may be a problem w/ AP not having this bit set */ if (FC_PROTECTED(fc)) return wep_print(ndo, p); switch (FC_SUBTYPE(fc)) { case ST_ASSOC_REQUEST: return handle_assoc_request(ndo, p, length); case ST_ASSOC_RESPONSE: return handle_assoc_response(ndo, p, length); case ST_REASSOC_REQUEST: return handle_reassoc_request(ndo, p, length); case ST_REASSOC_RESPONSE: return handle_reassoc_response(ndo, p, length); case ST_PROBE_REQUEST: return handle_probe_request(ndo, p, length); case ST_PROBE_RESPONSE: return handle_probe_response(ndo, p, length); case ST_BEACON: return handle_beacon(ndo, p, length); case ST_ATIM: return handle_atim(); case ST_DISASSOC: return handle_disassoc(ndo, p, length); case ST_AUTH: return handle_auth(ndo, p, length); case ST_DEAUTH: return handle_deauth(ndo, src, p, length); case ST_ACTION: return handle_action(ndo, src, p, length); default: return 1; } } /********************************************************************************* * Handles printing all the control frame types *********************************************************************************/ static int ctrl_body_print(netdissect_options *ndo, uint16_t fc, const u_char *p) { ND_PRINT("%s", tok2str(ctrl_str, "Unknown Ctrl Subtype", FC_SUBTYPE(fc))); switch (FC_SUBTYPE(fc)) { case CTRL_CONTROL_WRAPPER: /* XXX - requires special handling */ break; case CTRL_BAR: ND_TCHECK_LEN(p, CTRL_BAR_HDRLEN); if (!ndo->ndo_eflag) ND_PRINT(" RA:%s TA:%s CTL(%x) SEQ(%u) ", GET_ETHERADDR_STRING(((const struct ctrl_bar_hdr_t *)p)->ra), GET_ETHERADDR_STRING(((const struct ctrl_bar_hdr_t *)p)->ta), GET_LE_U_2(((const struct ctrl_bar_hdr_t *)p)->ctl), GET_LE_U_2(((const struct ctrl_bar_hdr_t *)p)->seq)); break; case CTRL_BA: ND_TCHECK_LEN(p, CTRL_BA_HDRLEN); if (!ndo->ndo_eflag) ND_PRINT(" RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_ba_hdr_t *)p)->ra)); break; case CTRL_PS_POLL: ND_TCHECK_LEN(p, CTRL_PS_POLL_HDRLEN); ND_PRINT(" AID(%x)", GET_LE_U_2(((const struct ctrl_ps_poll_hdr_t *)p)->aid)); break; case CTRL_RTS: ND_TCHECK_LEN(p, CTRL_RTS_HDRLEN); if (!ndo->ndo_eflag) ND_PRINT(" TA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_rts_hdr_t *)p)->ta)); break; case CTRL_CTS: ND_TCHECK_LEN(p, CTRL_CTS_HDRLEN); if (!ndo->ndo_eflag) ND_PRINT(" RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_cts_hdr_t *)p)->ra)); break; case CTRL_ACK: ND_TCHECK_LEN(p, CTRL_ACK_HDRLEN); if (!ndo->ndo_eflag) ND_PRINT(" RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_ack_hdr_t *)p)->ra)); break; case CTRL_CF_END: ND_TCHECK_LEN(p, CTRL_END_HDRLEN); if (!ndo->ndo_eflag) ND_PRINT(" RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_end_hdr_t *)p)->ra)); break; case CTRL_END_ACK: ND_TCHECK_LEN(p, CTRL_END_ACK_HDRLEN); if (!ndo->ndo_eflag) ND_PRINT(" RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_end_ack_hdr_t *)p)->ra)); break; } return 1; trunc: return 0; } /* * Data Frame - Address field contents * * To Ds | From DS | Addr 1 | Addr 2 | Addr 3 | Addr 4 * 0 | 0 | DA | SA | BSSID | n/a * 0 | 1 | DA | BSSID | SA | n/a * 1 | 0 | BSSID | SA | DA | n/a * 1 | 1 | RA | TA | DA | SA */ /* * Function to get source and destination MAC addresses for a data frame. */ static void get_data_src_dst_mac(uint16_t fc, const u_char *p, const uint8_t **srcp, const uint8_t **dstp) { #define ADDR1 (p + 4) #define ADDR2 (p + 10) #define ADDR3 (p + 16) #define ADDR4 (p + 24) if (!FC_TO_DS(fc)) { if (!FC_FROM_DS(fc)) { /* not To DS and not From DS */ *srcp = ADDR2; *dstp = ADDR1; } else { /* not To DS and From DS */ *srcp = ADDR3; *dstp = ADDR1; } } else { if (!FC_FROM_DS(fc)) { /* To DS and not From DS */ *srcp = ADDR2; *dstp = ADDR3; } else { /* To DS and From DS */ *srcp = ADDR4; *dstp = ADDR3; } } #undef ADDR1 #undef ADDR2 #undef ADDR3 #undef ADDR4 } static void get_mgmt_src_dst_mac(const u_char *p, const uint8_t **srcp, const uint8_t **dstp) { const struct mgmt_header_t *hp = (const struct mgmt_header_t *) p; if (srcp != NULL) *srcp = hp->sa; if (dstp != NULL) *dstp = hp->da; } /* * Print Header funcs */ static void data_header_print(netdissect_options *ndo, uint16_t fc, const u_char *p) { u_int subtype = FC_SUBTYPE(fc); if (DATA_FRAME_IS_CF_ACK(subtype) || DATA_FRAME_IS_CF_POLL(subtype) || DATA_FRAME_IS_QOS(subtype)) { ND_PRINT("CF "); if (DATA_FRAME_IS_CF_ACK(subtype)) { if (DATA_FRAME_IS_CF_POLL(subtype)) ND_PRINT("Ack/Poll"); else ND_PRINT("Ack"); } else { if (DATA_FRAME_IS_CF_POLL(subtype)) ND_PRINT("Poll"); } if (DATA_FRAME_IS_QOS(subtype)) ND_PRINT("+QoS"); ND_PRINT(" "); } #define ADDR1 (p + 4) #define ADDR2 (p + 10) #define ADDR3 (p + 16) #define ADDR4 (p + 24) if (!FC_TO_DS(fc) && !FC_FROM_DS(fc)) { ND_PRINT("DA:%s SA:%s BSSID:%s ", GET_ETHERADDR_STRING(ADDR1), GET_ETHERADDR_STRING(ADDR2), GET_ETHERADDR_STRING(ADDR3)); } else if (!FC_TO_DS(fc) && FC_FROM_DS(fc)) { ND_PRINT("DA:%s BSSID:%s SA:%s ", GET_ETHERADDR_STRING(ADDR1), GET_ETHERADDR_STRING(ADDR2), GET_ETHERADDR_STRING(ADDR3)); } else if (FC_TO_DS(fc) && !FC_FROM_DS(fc)) { ND_PRINT("BSSID:%s SA:%s DA:%s ", GET_ETHERADDR_STRING(ADDR1), GET_ETHERADDR_STRING(ADDR2), GET_ETHERADDR_STRING(ADDR3)); } else if (FC_TO_DS(fc) && FC_FROM_DS(fc)) { ND_PRINT("RA:%s TA:%s DA:%s SA:%s ", GET_ETHERADDR_STRING(ADDR1), GET_ETHERADDR_STRING(ADDR2), GET_ETHERADDR_STRING(ADDR3), GET_ETHERADDR_STRING(ADDR4)); } #undef ADDR1 #undef ADDR2 #undef ADDR3 #undef ADDR4 } static void mgmt_header_print(netdissect_options *ndo, const u_char *p) { const struct mgmt_header_t *hp = (const struct mgmt_header_t *) p; ND_PRINT("BSSID:%s DA:%s SA:%s ", GET_ETHERADDR_STRING((hp)->bssid), GET_ETHERADDR_STRING((hp)->da), GET_ETHERADDR_STRING((hp)->sa)); } static void ctrl_header_print(netdissect_options *ndo, uint16_t fc, const u_char *p) { switch (FC_SUBTYPE(fc)) { case CTRL_BAR: ND_PRINT(" RA:%s TA:%s CTL(%x) SEQ(%u) ", GET_ETHERADDR_STRING(((const struct ctrl_bar_hdr_t *)p)->ra), GET_ETHERADDR_STRING(((const struct ctrl_bar_hdr_t *)p)->ta), GET_LE_U_2(((const struct ctrl_bar_hdr_t *)p)->ctl), GET_LE_U_2(((const struct ctrl_bar_hdr_t *)p)->seq)); break; case CTRL_BA: ND_PRINT("RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_ba_hdr_t *)p)->ra)); break; case CTRL_PS_POLL: ND_PRINT("BSSID:%s TA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_ps_poll_hdr_t *)p)->bssid), GET_ETHERADDR_STRING(((const struct ctrl_ps_poll_hdr_t *)p)->ta)); break; case CTRL_RTS: ND_PRINT("RA:%s TA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_rts_hdr_t *)p)->ra), GET_ETHERADDR_STRING(((const struct ctrl_rts_hdr_t *)p)->ta)); break; case CTRL_CTS: ND_PRINT("RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_cts_hdr_t *)p)->ra)); break; case CTRL_ACK: ND_PRINT("RA:%s ", GET_ETHERADDR_STRING(((const struct ctrl_ack_hdr_t *)p)->ra)); break; case CTRL_CF_END: ND_PRINT("RA:%s BSSID:%s ", GET_ETHERADDR_STRING(((const struct ctrl_end_hdr_t *)p)->ra), GET_ETHERADDR_STRING(((const struct ctrl_end_hdr_t *)p)->bssid)); break; case CTRL_END_ACK: ND_PRINT("RA:%s BSSID:%s ", GET_ETHERADDR_STRING(((const struct ctrl_end_ack_hdr_t *)p)->ra), GET_ETHERADDR_STRING(((const struct ctrl_end_ack_hdr_t *)p)->bssid)); break; default: /* We shouldn't get here - we should already have quit */ break; } } static int extract_header_length(netdissect_options *ndo, uint16_t fc) { int len; switch (FC_TYPE(fc)) { case T_MGMT: return MGMT_HDRLEN; case T_CTRL: switch (FC_SUBTYPE(fc)) { case CTRL_CONTROL_WRAPPER: return CTRL_CONTROL_WRAPPER_HDRLEN; case CTRL_BAR: return CTRL_BAR_HDRLEN; case CTRL_BA: return CTRL_BA_HDRLEN; case CTRL_PS_POLL: return CTRL_PS_POLL_HDRLEN; case CTRL_RTS: return CTRL_RTS_HDRLEN; case CTRL_CTS: return CTRL_CTS_HDRLEN; case CTRL_ACK: return CTRL_ACK_HDRLEN; case CTRL_CF_END: return CTRL_END_HDRLEN; case CTRL_END_ACK: return CTRL_END_ACK_HDRLEN; default: ND_PRINT("unknown 802.11 ctrl frame subtype (%u)", FC_SUBTYPE(fc)); return 0; } case T_DATA: len = (FC_TO_DS(fc) && FC_FROM_DS(fc)) ? 30 : 24; if (DATA_FRAME_IS_QOS(FC_SUBTYPE(fc))) len += 2; return len; default: ND_PRINT("unknown 802.11 frame type (%u)", FC_TYPE(fc)); return 0; } } static int extract_mesh_header_length(netdissect_options *ndo, const u_char *p) { return (GET_U_1(p) &~ 3) ? 0 : 6*(1 + (GET_U_1(p) & 3)); } /* * Print the 802.11 MAC header. */ static void ieee_802_11_hdr_print(netdissect_options *ndo, uint16_t fc, const u_char *p, u_int hdrlen, u_int meshdrlen) { if (ndo->ndo_vflag) { if (FC_MORE_DATA(fc)) ND_PRINT("More Data "); if (FC_MORE_FLAG(fc)) ND_PRINT("More Fragments "); if (FC_POWER_MGMT(fc)) ND_PRINT("Pwr Mgmt "); if (FC_RETRY(fc)) ND_PRINT("Retry "); if (FC_ORDER(fc)) ND_PRINT("Strictly Ordered "); if (FC_PROTECTED(fc)) ND_PRINT("Protected "); if (FC_TYPE(fc) != T_CTRL || FC_SUBTYPE(fc) != CTRL_PS_POLL) ND_PRINT("%uus ", GET_LE_U_2(((const struct mgmt_header_t *)p)->duration)); } if (meshdrlen != 0) { const struct meshcntl_t *mc = (const struct meshcntl_t *)(p + hdrlen - meshdrlen); u_int ae = GET_U_1(mc->flags) & 3; ND_PRINT("MeshData (AE %u TTL %u seq %u", ae, GET_U_1(mc->ttl), GET_LE_U_4(mc->seq)); if (ae > 0) ND_PRINT(" A4:%s", GET_ETHERADDR_STRING(mc->addr4)); if (ae > 1) ND_PRINT(" A5:%s", GET_ETHERADDR_STRING(mc->addr5)); if (ae > 2) ND_PRINT(" A6:%s", GET_ETHERADDR_STRING(mc->addr6)); ND_PRINT(") "); } switch (FC_TYPE(fc)) { case T_MGMT: mgmt_header_print(ndo, p); break; case T_CTRL: ctrl_header_print(ndo, fc, p); break; case T_DATA: data_header_print(ndo, fc, p); break; default: break; } } static u_int ieee802_11_print(netdissect_options *ndo, const u_char *p, u_int length, u_int orig_caplen, int pad, u_int fcslen) { uint16_t fc; u_int caplen, hdrlen, meshdrlen; struct lladdr_info src, dst; int llc_hdrlen; ndo->ndo_protocol = "802.11"; caplen = orig_caplen; /* Remove FCS, if present */ if (length < fcslen) { nd_print_trunc(ndo); return caplen; } length -= fcslen; if (caplen > length) { /* Amount of FCS in actual packet data, if any */ fcslen = caplen - length; caplen -= fcslen; ndo->ndo_snapend -= fcslen; } if (caplen < IEEE802_11_FC_LEN) { nd_print_trunc(ndo); return orig_caplen; } fc = GET_LE_U_2(p); hdrlen = extract_header_length(ndo, fc); if (hdrlen == 0) { /* Unknown frame type or control frame subtype; quit. */ return (0); } if (pad) hdrlen = roundup2(hdrlen, 4); if (ndo->ndo_Hflag && FC_TYPE(fc) == T_DATA && DATA_FRAME_IS_QOS(FC_SUBTYPE(fc))) { if(!ND_TTEST_1(p + hdrlen)) { nd_print_trunc(ndo); return hdrlen; } meshdrlen = extract_mesh_header_length(ndo, p + hdrlen); hdrlen += meshdrlen; } else meshdrlen = 0; if (caplen < hdrlen) { nd_print_trunc(ndo); return hdrlen; } if (ndo->ndo_eflag) ieee_802_11_hdr_print(ndo, fc, p, hdrlen, meshdrlen); /* * Go past the 802.11 header. */ length -= hdrlen; caplen -= hdrlen; p += hdrlen; src.addr_string = etheraddr_string; dst.addr_string = etheraddr_string; switch (FC_TYPE(fc)) { case T_MGMT: get_mgmt_src_dst_mac(p - hdrlen, &src.addr, &dst.addr); if (!mgmt_body_print(ndo, fc, src.addr, p, length)) { nd_print_trunc(ndo); return hdrlen; } break; case T_CTRL: if (!ctrl_body_print(ndo, fc, p - hdrlen)) { nd_print_trunc(ndo); return hdrlen; } break; case T_DATA: if (DATA_FRAME_IS_NULL(FC_SUBTYPE(fc))) return hdrlen; /* no-data frame */ /* There may be a problem w/ AP not having this bit set */ if (FC_PROTECTED(fc)) { ND_PRINT("Data"); if (!wep_print(ndo, p)) { nd_print_trunc(ndo); return hdrlen; } } else { get_data_src_dst_mac(fc, p - hdrlen, &src.addr, &dst.addr); llc_hdrlen = llc_print(ndo, p, length, caplen, &src, &dst); if (llc_hdrlen < 0) { /* * Some kinds of LLC packet we cannot * handle intelligently */ if (!ndo->ndo_suppress_default_print) ND_DEFAULTPRINT(p, caplen); llc_hdrlen = -llc_hdrlen; } hdrlen += llc_hdrlen; } break; default: /* We shouldn't get here - we should already have quit */ break; } return hdrlen; } /* * This is the top level routine of the printer. 'p' points * to the 802.11 header of the packet, 'h->ts' is the timestamp, * 'h->len' is the length of the packet off the wire, and 'h->caplen' * is the number of bytes actually captured. */ void ieee802_11_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h, const u_char *p) { ndo->ndo_protocol = "802.11"; ndo->ndo_ll_hdr_len += ieee802_11_print(ndo, p, h->len, h->caplen, 0, 0); } /* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */ /* NetBSD: ieee802_11_radio.h,v 1.2 2006/02/26 03:04:03 dyoung Exp */ /*- * Copyright (c) 2003, 2004 David Young. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of David Young may not be used to endorse or promote * products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. */ /* A generic radio capture format is desirable. It must be * rigidly defined (e.g., units for fields should be given), * and easily extensible. * * The following is an extensible radio capture format. It is * based on a bitmap indicating which fields are present. * * I am trying to describe precisely what the application programmer * should expect in the following, and for that reason I tell the * units and origin of each measurement (where it applies), or else I * use sufficiently weaselly language ("is a monotonically nondecreasing * function of...") that I cannot set false expectations for lawyerly * readers. */ /* * The radio capture header precedes the 802.11 header. * * Note well: all radiotap fields are little-endian. */ struct ieee80211_radiotap_header { nd_uint8_t it_version; /* Version 0. Only increases * for drastic changes, * introduction of compatible * new fields does not count. */ nd_uint8_t it_pad; nd_uint16_t it_len; /* length of the whole * header in bytes, including * it_version, it_pad, * it_len, and data fields. */ nd_uint32_t it_present; /* A bitmap telling which * fields are present. Set bit 31 * (0x80000000) to extend the * bitmap by another 32 bits. * Additional extensions are made * by setting bit 31. */ }; /* Name Data type Units * ---- --------- ----- * * IEEE80211_RADIOTAP_TSFT uint64_t microseconds * * Value in microseconds of the MAC's 64-bit 802.11 Time * Synchronization Function timer when the first bit of the * MPDU arrived at the MAC. For received frames, only. * * IEEE80211_RADIOTAP_CHANNEL 2 x uint16_t MHz, bitmap * * Tx/Rx frequency in MHz, followed by flags (see below). * Note that IEEE80211_RADIOTAP_XCHANNEL must be used to * represent an HT channel as there is not enough room in * the flags word. * * IEEE80211_RADIOTAP_FHSS uint16_t see below * * For frequency-hopping radios, the hop set (first byte) * and pattern (second byte). * * IEEE80211_RADIOTAP_RATE uint8_t 500kb/s or index * * Tx/Rx data rate. If bit 0x80 is set then it represents an * an MCS index and not an IEEE rate. * * IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from * one milliwatt (dBm) * * RF signal power at the antenna, decibel difference from * one milliwatt. * * IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from * one milliwatt (dBm) * * RF noise power at the antenna, decibel difference from one * milliwatt. * * IEEE80211_RADIOTAP_DB_ANTSIGNAL uint8_t decibel (dB) * * RF signal power at the antenna, decibel difference from an * arbitrary, fixed reference. * * IEEE80211_RADIOTAP_DB_ANTNOISE uint8_t decibel (dB) * * RF noise power at the antenna, decibel difference from an * arbitrary, fixed reference point. * * IEEE80211_RADIOTAP_LOCK_QUALITY uint16_t unitless * * Quality of Barker code lock. Unitless. Monotonically * nondecreasing with "better" lock strength. Called "Signal * Quality" in datasheets. (Is there a standard way to measure * this?) * * IEEE80211_RADIOTAP_TX_ATTENUATION uint16_t unitless * * Transmit power expressed as unitless distance from max * power set at factory calibration. 0 is max power. * Monotonically nondecreasing with lower power levels. * * IEEE80211_RADIOTAP_DB_TX_ATTENUATION uint16_t decibels (dB) * * Transmit power expressed as decibel distance from max power * set at factory calibration. 0 is max power. Monotonically * nondecreasing with lower power levels. * * IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from * one milliwatt (dBm) * * Transmit power expressed as dBm (decibels from a 1 milliwatt * reference). This is the absolute power level measured at * the antenna port. * * IEEE80211_RADIOTAP_FLAGS uint8_t bitmap * * Properties of transmitted and received frames. See flags * defined below. * * IEEE80211_RADIOTAP_ANTENNA uint8_t antenna index * * Unitless indication of the Rx/Tx antenna for this packet. * The first antenna is antenna 0. * * IEEE80211_RADIOTAP_RX_FLAGS uint16_t bitmap * * Properties of received frames. See flags defined below. * * IEEE80211_RADIOTAP_XCHANNEL uint32_t bitmap * uint16_t MHz * uint8_t channel number * uint8_t .5 dBm * * Extended channel specification: flags (see below) followed by * frequency in MHz, the corresponding IEEE channel number, and * finally the maximum regulatory transmit power cap in .5 dBm * units. This property supersedes IEEE80211_RADIOTAP_CHANNEL * and only one of the two should be present. * * IEEE80211_RADIOTAP_MCS uint8_t known * uint8_t flags * uint8_t mcs * * Bitset indicating which fields have known values, followed * by bitset of flag values, followed by the MCS rate index as * in IEEE 802.11n. * * * IEEE80211_RADIOTAP_AMPDU_STATUS u32, u16, u8, u8 unitless * * Contains the AMPDU information for the subframe. * * IEEE80211_RADIOTAP_VHT u16, u8, u8, u8[4], u8, u8, u16 * * Contains VHT information about this frame. * * IEEE80211_RADIOTAP_VENDOR_NAMESPACE * uint8_t OUI[3] * uint8_t subspace * uint16_t length * * The Vendor Namespace Field contains three sub-fields. The first * sub-field is 3 bytes long. It contains the vendor's IEEE 802 * Organizationally Unique Identifier (OUI). The fourth byte is a * vendor-specific "namespace selector." * */ enum ieee80211_radiotap_type { IEEE80211_RADIOTAP_TSFT = 0, IEEE80211_RADIOTAP_FLAGS = 1, IEEE80211_RADIOTAP_RATE = 2, IEEE80211_RADIOTAP_CHANNEL = 3, IEEE80211_RADIOTAP_FHSS = 4, IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5, IEEE80211_RADIOTAP_DBM_ANTNOISE = 6, IEEE80211_RADIOTAP_LOCK_QUALITY = 7, IEEE80211_RADIOTAP_TX_ATTENUATION = 8, IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9, IEEE80211_RADIOTAP_DBM_TX_POWER = 10, IEEE80211_RADIOTAP_ANTENNA = 11, IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12, IEEE80211_RADIOTAP_DB_ANTNOISE = 13, IEEE80211_RADIOTAP_RX_FLAGS = 14, /* NB: gap for netbsd definitions */ IEEE80211_RADIOTAP_XCHANNEL = 18, IEEE80211_RADIOTAP_MCS = 19, IEEE80211_RADIOTAP_AMPDU_STATUS = 20, IEEE80211_RADIOTAP_VHT = 21, IEEE80211_RADIOTAP_NAMESPACE = 29, IEEE80211_RADIOTAP_VENDOR_NAMESPACE = 30, IEEE80211_RADIOTAP_EXT = 31 }; /* channel attributes */ #define IEEE80211_CHAN_TURBO 0x00010 /* Turbo channel */ #define IEEE80211_CHAN_CCK 0x00020 /* CCK channel */ #define IEEE80211_CHAN_OFDM 0x00040 /* OFDM channel */ #define IEEE80211_CHAN_2GHZ 0x00080 /* 2 GHz spectrum channel. */ #define IEEE80211_CHAN_5GHZ 0x00100 /* 5 GHz spectrum channel */ #define IEEE80211_CHAN_PASSIVE 0x00200 /* Only passive scan allowed */ #define IEEE80211_CHAN_DYN 0x00400 /* Dynamic CCK-OFDM channel */ #define IEEE80211_CHAN_GFSK 0x00800 /* GFSK channel (FHSS PHY) */ #define IEEE80211_CHAN_GSM 0x01000 /* 900 MHz spectrum channel */ #define IEEE80211_CHAN_STURBO 0x02000 /* 11a static turbo channel only */ #define IEEE80211_CHAN_HALF 0x04000 /* Half rate channel */ #define IEEE80211_CHAN_QUARTER 0x08000 /* Quarter rate channel */ #define IEEE80211_CHAN_HT20 0x10000 /* HT 20 channel */ #define IEEE80211_CHAN_HT40U 0x20000 /* HT 40 channel w/ ext above */ #define IEEE80211_CHAN_HT40D 0x40000 /* HT 40 channel w/ ext below */ /* Useful combinations of channel characteristics, borrowed from Ethereal */ #define IEEE80211_CHAN_A \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_B \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) #define IEEE80211_CHAN_G \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) #define IEEE80211_CHAN_TA \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_TG \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN | IEEE80211_CHAN_TURBO) /* For IEEE80211_RADIOTAP_FLAGS */ #define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received * during CFP */ #define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received * with short * preamble */ #define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received * with WEP encryption */ #define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received * with fragmentation */ #define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */ #define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between * 802.11 header and payload * (to 32-bit boundary) */ #define IEEE80211_RADIOTAP_F_BADFCS 0x40 /* does not pass FCS check */ /* For IEEE80211_RADIOTAP_RX_FLAGS */ #define IEEE80211_RADIOTAP_F_RX_BADFCS 0x0001 /* frame failed crc check */ #define IEEE80211_RADIOTAP_F_RX_PLCP_CRC 0x0002 /* frame failed PLCP CRC check */ /* For IEEE80211_RADIOTAP_MCS known */ #define IEEE80211_RADIOTAP_MCS_BANDWIDTH_KNOWN 0x01 #define IEEE80211_RADIOTAP_MCS_MCS_INDEX_KNOWN 0x02 /* MCS index field */ #define IEEE80211_RADIOTAP_MCS_GUARD_INTERVAL_KNOWN 0x04 #define IEEE80211_RADIOTAP_MCS_HT_FORMAT_KNOWN 0x08 #define IEEE80211_RADIOTAP_MCS_FEC_TYPE_KNOWN 0x10 #define IEEE80211_RADIOTAP_MCS_STBC_KNOWN 0x20 #define IEEE80211_RADIOTAP_MCS_NESS_KNOWN 0x40 #define IEEE80211_RADIOTAP_MCS_NESS_BIT_1 0x80 /* For IEEE80211_RADIOTAP_MCS flags */ #define IEEE80211_RADIOTAP_MCS_BANDWIDTH_MASK 0x03 #define IEEE80211_RADIOTAP_MCS_BANDWIDTH_20 0 #define IEEE80211_RADIOTAP_MCS_BANDWIDTH_40 1 #define IEEE80211_RADIOTAP_MCS_BANDWIDTH_20L 2 #define IEEE80211_RADIOTAP_MCS_BANDWIDTH_20U 3 #define IEEE80211_RADIOTAP_MCS_SHORT_GI 0x04 /* short guard interval */ #define IEEE80211_RADIOTAP_MCS_HT_GREENFIELD 0x08 #define IEEE80211_RADIOTAP_MCS_FEC_LDPC 0x10 #define IEEE80211_RADIOTAP_MCS_STBC_MASK 0x60 #define IEEE80211_RADIOTAP_MCS_STBC_1 1 #define IEEE80211_RADIOTAP_MCS_STBC_2 2 #define IEEE80211_RADIOTAP_MCS_STBC_3 3 #define IEEE80211_RADIOTAP_MCS_STBC_SHIFT 5 #define IEEE80211_RADIOTAP_MCS_NESS_BIT_0 0x80 /* For IEEE80211_RADIOTAP_AMPDU_STATUS */ #define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN 0x0001 #define IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN 0x0002 #define IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN 0x0004 #define IEEE80211_RADIOTAP_AMPDU_IS_LAST 0x0008 #define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR 0x0010 #define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN 0x0020 /* For IEEE80211_RADIOTAP_VHT known */ #define IEEE80211_RADIOTAP_VHT_STBC_KNOWN 0x0001 #define IEEE80211_RADIOTAP_VHT_TXOP_PS_NA_KNOWN 0x0002 #define IEEE80211_RADIOTAP_VHT_GUARD_INTERVAL_KNOWN 0x0004 #define IEEE80211_RADIOTAP_VHT_SGI_NSYM_DIS_KNOWN 0x0008 #define IEEE80211_RADIOTAP_VHT_LDPC_EXTRA_OFDM_SYM_KNOWN 0x0010 #define IEEE80211_RADIOTAP_VHT_BEAMFORMED_KNOWN 0x0020 #define IEEE80211_RADIOTAP_VHT_BANDWIDTH_KNOWN 0x0040 #define IEEE80211_RADIOTAP_VHT_GROUP_ID_KNOWN 0x0080 #define IEEE80211_RADIOTAP_VHT_PARTIAL_AID_KNOWN 0x0100 /* For IEEE80211_RADIOTAP_VHT flags */ #define IEEE80211_RADIOTAP_VHT_STBC 0x01 #define IEEE80211_RADIOTAP_VHT_TXOP_PS_NA 0x02 #define IEEE80211_RADIOTAP_VHT_SHORT_GI 0x04 #define IEEE80211_RADIOTAP_VHT_SGI_NSYM_M10_9 0x08 #define IEEE80211_RADIOTAP_VHT_LDPC_EXTRA_OFDM_SYM 0x10 #define IEEE80211_RADIOTAP_VHT_BEAMFORMED 0x20 #define IEEE80211_RADIOTAP_VHT_BANDWIDTH_MASK 0x1f #define IEEE80211_RADIOTAP_VHT_NSS_MASK 0x0f #define IEEE80211_RADIOTAP_VHT_MCS_MASK 0xf0 #define IEEE80211_RADIOTAP_VHT_MCS_SHIFT 4 #define IEEE80211_RADIOTAP_CODING_LDPC_USERn 0x01 #define IEEE80211_CHAN_FHSS \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) #define IEEE80211_CHAN_A \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_B \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) #define IEEE80211_CHAN_PUREG \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_G \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) #define IS_CHAN_FHSS(flags) \ ((flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) #define IS_CHAN_A(flags) \ ((flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) #define IS_CHAN_B(flags) \ ((flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) #define IS_CHAN_PUREG(flags) \ ((flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) #define IS_CHAN_G(flags) \ ((flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) #define IS_CHAN_ANYG(flags) \ (IS_CHAN_PUREG(flags) || IS_CHAN_G(flags)) static void print_chaninfo(netdissect_options *ndo, uint16_t freq, uint32_t flags, uint32_t presentflags) { ND_PRINT("%u MHz", freq); if (presentflags & (1 << IEEE80211_RADIOTAP_MCS)) { /* * We have the MCS field, so this is 11n, regardless * of what the channel flags say. */ ND_PRINT(" 11n"); } else { if (IS_CHAN_FHSS(flags)) ND_PRINT(" FHSS"); if (IS_CHAN_A(flags)) { if (flags & IEEE80211_CHAN_HALF) ND_PRINT(" 11a/10Mhz"); else if (flags & IEEE80211_CHAN_QUARTER) ND_PRINT(" 11a/5Mhz"); else ND_PRINT(" 11a"); } if (IS_CHAN_ANYG(flags)) { if (flags & IEEE80211_CHAN_HALF) ND_PRINT(" 11g/10Mhz"); else if (flags & IEEE80211_CHAN_QUARTER) ND_PRINT(" 11g/5Mhz"); else ND_PRINT(" 11g"); } else if (IS_CHAN_B(flags)) ND_PRINT(" 11b"); if (flags & IEEE80211_CHAN_TURBO) ND_PRINT(" Turbo"); } /* * These apply to 11n. */ if (flags & IEEE80211_CHAN_HT20) ND_PRINT(" ht/20"); else if (flags & IEEE80211_CHAN_HT40D) ND_PRINT(" ht/40-"); else if (flags & IEEE80211_CHAN_HT40U) ND_PRINT(" ht/40+"); ND_PRINT(" "); } static int print_radiotap_field(netdissect_options *ndo, struct cpack_state *s, uint32_t bit, uint8_t *flagsp, uint32_t presentflags) { u_int i; int rc; switch (bit) { case IEEE80211_RADIOTAP_TSFT: { uint64_t tsft; rc = nd_cpack_uint64(ndo, s, &tsft); if (rc != 0) goto trunc; ND_PRINT("%" PRIu64 "us tsft ", tsft); break; } case IEEE80211_RADIOTAP_FLAGS: { uint8_t flagsval; rc = nd_cpack_uint8(ndo, s, &flagsval); if (rc != 0) goto trunc; *flagsp = flagsval; if (flagsval & IEEE80211_RADIOTAP_F_CFP) ND_PRINT("cfp "); if (flagsval & IEEE80211_RADIOTAP_F_SHORTPRE) ND_PRINT("short preamble "); if (flagsval & IEEE80211_RADIOTAP_F_WEP) ND_PRINT("wep "); if (flagsval & IEEE80211_RADIOTAP_F_FRAG) ND_PRINT("fragmented "); if (flagsval & IEEE80211_RADIOTAP_F_BADFCS) ND_PRINT("bad-fcs "); break; } case IEEE80211_RADIOTAP_RATE: { uint8_t rate; rc = nd_cpack_uint8(ndo, s, &rate); if (rc != 0) goto trunc; /* * XXX On FreeBSD rate & 0x80 means we have an MCS. On * Linux and AirPcap it does not. (What about * macOS, NetBSD, OpenBSD, and DragonFly BSD?) * * This is an issue either for proprietary extensions * to 11a or 11g, which do exist, or for 11n * implementations that stuff a rate value into * this field, which also appear to exist. * * We currently handle that by assuming that * if the 0x80 bit is set *and* the remaining * bits have a value between 0 and 15 it's * an MCS value, otherwise it's a rate. If * there are cases where systems that use * "0x80 + MCS index" for MCS indices > 15, * or stuff a rate value here between 64 and * 71.5 Mb/s in here, we'll need a preference * setting. Such rates do exist, e.g. 11n * MCS 7 at 20 MHz with a long guard interval. */ if (rate >= 0x80 && rate <= 0x8f) { /* * XXX - we don't know the channel width * or guard interval length, so we can't * convert this to a data rate. * * If you want us to show a data rate, * use the MCS field, not the Rate field; * the MCS field includes not only the * MCS index, it also includes bandwidth * and guard interval information. * * XXX - can we get the channel width * from XChannel and the guard interval * information from Flags, at least on * FreeBSD? */ ND_PRINT("MCS %u ", rate & 0x7f); } else ND_PRINT("%2.1f Mb/s ", .5 * rate); break; } case IEEE80211_RADIOTAP_CHANNEL: { uint16_t frequency; uint16_t flags; rc = nd_cpack_uint16(ndo, s, &frequency); if (rc != 0) goto trunc; rc = nd_cpack_uint16(ndo, s, &flags); if (rc != 0) goto trunc; /* * If CHANNEL and XCHANNEL are both present, skip * CHANNEL. */ if (presentflags & (1 << IEEE80211_RADIOTAP_XCHANNEL)) break; print_chaninfo(ndo, frequency, flags, presentflags); break; } case IEEE80211_RADIOTAP_FHSS: { uint8_t hopset; uint8_t hoppat; rc = nd_cpack_uint8(ndo, s, &hopset); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &hoppat); if (rc != 0) goto trunc; ND_PRINT("fhset %u fhpat %u ", hopset, hoppat); break; } case IEEE80211_RADIOTAP_DBM_ANTSIGNAL: { int8_t dbm_antsignal; rc = nd_cpack_int8(ndo, s, &dbm_antsignal); if (rc != 0) goto trunc; ND_PRINT("%ddBm signal ", dbm_antsignal); break; } case IEEE80211_RADIOTAP_DBM_ANTNOISE: { int8_t dbm_antnoise; rc = nd_cpack_int8(ndo, s, &dbm_antnoise); if (rc != 0) goto trunc; ND_PRINT("%ddBm noise ", dbm_antnoise); break; } case IEEE80211_RADIOTAP_LOCK_QUALITY: { uint16_t lock_quality; rc = nd_cpack_uint16(ndo, s, &lock_quality); if (rc != 0) goto trunc; ND_PRINT("%u sq ", lock_quality); break; } case IEEE80211_RADIOTAP_TX_ATTENUATION: { int16_t tx_attenuation; rc = nd_cpack_int16(ndo, s, &tx_attenuation); if (rc != 0) goto trunc; ND_PRINT("%d tx power ", -tx_attenuation); break; } case IEEE80211_RADIOTAP_DB_TX_ATTENUATION: { int8_t db_tx_attenuation; rc = nd_cpack_int8(ndo, s, &db_tx_attenuation); if (rc != 0) goto trunc; ND_PRINT("%ddB tx attenuation ", -db_tx_attenuation); break; } case IEEE80211_RADIOTAP_DBM_TX_POWER: { int8_t dbm_tx_power; rc = nd_cpack_int8(ndo, s, &dbm_tx_power); if (rc != 0) goto trunc; ND_PRINT("%ddBm tx power ", dbm_tx_power); break; } case IEEE80211_RADIOTAP_ANTENNA: { uint8_t antenna; rc = nd_cpack_uint8(ndo, s, &antenna); if (rc != 0) goto trunc; ND_PRINT("antenna %u ", antenna); break; } case IEEE80211_RADIOTAP_DB_ANTSIGNAL: { uint8_t db_antsignal; rc = nd_cpack_uint8(ndo, s, &db_antsignal); if (rc != 0) goto trunc; ND_PRINT("%udB signal ", db_antsignal); break; } case IEEE80211_RADIOTAP_DB_ANTNOISE: { uint8_t db_antnoise; rc = nd_cpack_uint8(ndo, s, &db_antnoise); if (rc != 0) goto trunc; ND_PRINT("%udB noise ", db_antnoise); break; } case IEEE80211_RADIOTAP_RX_FLAGS: { uint16_t rx_flags; rc = nd_cpack_uint16(ndo, s, &rx_flags); if (rc != 0) goto trunc; /* Do nothing for now */ break; } case IEEE80211_RADIOTAP_XCHANNEL: { uint32_t flags; uint16_t frequency; uint8_t channel; uint8_t maxpower; rc = nd_cpack_uint32(ndo, s, &flags); if (rc != 0) goto trunc; rc = nd_cpack_uint16(ndo, s, &frequency); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &channel); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &maxpower); if (rc != 0) goto trunc; print_chaninfo(ndo, frequency, flags, presentflags); break; } case IEEE80211_RADIOTAP_MCS: { uint8_t known; uint8_t flags; uint8_t mcs_index; static const char *ht_bandwidth[4] = { "20 MHz", "40 MHz", "20 MHz (L)", "20 MHz (U)" }; float htrate; rc = nd_cpack_uint8(ndo, s, &known); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &flags); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &mcs_index); if (rc != 0) goto trunc; if (known & IEEE80211_RADIOTAP_MCS_MCS_INDEX_KNOWN) { /* * We know the MCS index. */ if (mcs_index <= MAX_MCS_INDEX) { /* * And it's in-range. */ if (known & (IEEE80211_RADIOTAP_MCS_BANDWIDTH_KNOWN|IEEE80211_RADIOTAP_MCS_GUARD_INTERVAL_KNOWN)) { /* * And we know both the bandwidth and * the guard interval, so we can look * up the rate. */ htrate = ieee80211_float_htrates [mcs_index] [((flags & IEEE80211_RADIOTAP_MCS_BANDWIDTH_MASK) == IEEE80211_RADIOTAP_MCS_BANDWIDTH_40 ? 1 : 0)] [((flags & IEEE80211_RADIOTAP_MCS_SHORT_GI) ? 1 : 0)]; } else { /* * We don't know both the bandwidth * and the guard interval, so we can * only report the MCS index. */ htrate = 0.0; } } else { /* * The MCS value is out of range. */ htrate = 0.0; } if (htrate != 0.0) { /* * We have the rate. * Print it. */ ND_PRINT("%.1f Mb/s MCS %u ", htrate, mcs_index); } else { /* * We at least have the MCS index. * Print it. */ ND_PRINT("MCS %u ", mcs_index); } } if (known & IEEE80211_RADIOTAP_MCS_BANDWIDTH_KNOWN) { ND_PRINT("%s ", ht_bandwidth[flags & IEEE80211_RADIOTAP_MCS_BANDWIDTH_MASK]); } if (known & IEEE80211_RADIOTAP_MCS_GUARD_INTERVAL_KNOWN) { ND_PRINT("%s GI ", (flags & IEEE80211_RADIOTAP_MCS_SHORT_GI) ? "short" : "long"); } if (known & IEEE80211_RADIOTAP_MCS_HT_FORMAT_KNOWN) { ND_PRINT("%s ", (flags & IEEE80211_RADIOTAP_MCS_HT_GREENFIELD) ? "greenfield" : "mixed"); } if (known & IEEE80211_RADIOTAP_MCS_FEC_TYPE_KNOWN) { ND_PRINT("%s FEC ", (flags & IEEE80211_RADIOTAP_MCS_FEC_LDPC) ? "LDPC" : "BCC"); } if (known & IEEE80211_RADIOTAP_MCS_STBC_KNOWN) { ND_PRINT("RX-STBC%u ", (flags & IEEE80211_RADIOTAP_MCS_STBC_MASK) >> IEEE80211_RADIOTAP_MCS_STBC_SHIFT); } break; } case IEEE80211_RADIOTAP_AMPDU_STATUS: { uint32_t reference_num; uint16_t flags; uint8_t delim_crc; uint8_t reserved; rc = nd_cpack_uint32(ndo, s, &reference_num); if (rc != 0) goto trunc; rc = nd_cpack_uint16(ndo, s, &flags); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &delim_crc); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &reserved); if (rc != 0) goto trunc; /* Do nothing for now */ break; } case IEEE80211_RADIOTAP_VHT: { uint16_t known; uint8_t flags; uint8_t bandwidth; uint8_t mcs_nss[4]; uint8_t coding; uint8_t group_id; uint16_t partial_aid; static const char *vht_bandwidth[32] = { "20 MHz", "40 MHz", "20 MHz (L)", "20 MHz (U)", "80 MHz", "80 MHz (L)", "80 MHz (U)", "80 MHz (LL)", "80 MHz (LU)", "80 MHz (UL)", "80 MHz (UU)", "160 MHz", "160 MHz (L)", "160 MHz (U)", "160 MHz (LL)", "160 MHz (LU)", "160 MHz (UL)", "160 MHz (UU)", "160 MHz (LLL)", "160 MHz (LLU)", "160 MHz (LUL)", "160 MHz (UUU)", "160 MHz (ULL)", "160 MHz (ULU)", "160 MHz (UUL)", "160 MHz (UUU)", "unknown (26)", "unknown (27)", "unknown (28)", "unknown (29)", "unknown (30)", "unknown (31)" }; rc = nd_cpack_uint16(ndo, s, &known); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &flags); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &bandwidth); if (rc != 0) goto trunc; for (i = 0; i < 4; i++) { rc = nd_cpack_uint8(ndo, s, &mcs_nss[i]); if (rc != 0) goto trunc; } rc = nd_cpack_uint8(ndo, s, &coding); if (rc != 0) goto trunc; rc = nd_cpack_uint8(ndo, s, &group_id); if (rc != 0) goto trunc; rc = nd_cpack_uint16(ndo, s, &partial_aid); if (rc != 0) goto trunc; for (i = 0; i < 4; i++) { u_int nss, mcs; nss = mcs_nss[i] & IEEE80211_RADIOTAP_VHT_NSS_MASK; mcs = (mcs_nss[i] & IEEE80211_RADIOTAP_VHT_MCS_MASK) >> IEEE80211_RADIOTAP_VHT_MCS_SHIFT; if (nss == 0) continue; ND_PRINT("User %u MCS %u ", i, mcs); ND_PRINT("%s FEC ", (coding & (IEEE80211_RADIOTAP_CODING_LDPC_USERn << i)) ? "LDPC" : "BCC"); } if (known & IEEE80211_RADIOTAP_VHT_BANDWIDTH_KNOWN) { ND_PRINT("%s ", vht_bandwidth[bandwidth & IEEE80211_RADIOTAP_VHT_BANDWIDTH_MASK]); } if (known & IEEE80211_RADIOTAP_VHT_GUARD_INTERVAL_KNOWN) { ND_PRINT("%s GI ", (flags & IEEE80211_RADIOTAP_VHT_SHORT_GI) ? "short" : "long"); } break; } default: /* this bit indicates a field whose * size we do not know, so we cannot * proceed. Just print the bit number. */ ND_PRINT("[bit %u] ", bit); return -1; } return 0; trunc: nd_print_trunc(ndo); return rc; } static int print_in_radiotap_namespace(netdissect_options *ndo, struct cpack_state *s, uint8_t *flags, uint32_t presentflags, int bit0) { #define BITNO_32(x) (((x) >> 16) ? 16 + BITNO_16((x) >> 16) : BITNO_16((x))) #define BITNO_16(x) (((x) >> 8) ? 8 + BITNO_8((x) >> 8) : BITNO_8((x))) #define BITNO_8(x) (((x) >> 4) ? 4 + BITNO_4((x) >> 4) : BITNO_4((x))) #define BITNO_4(x) (((x) >> 2) ? 2 + BITNO_2((x) >> 2) : BITNO_2((x))) #define BITNO_2(x) (((x) & 2) ? 1 : 0) uint32_t present, next_present; int bitno; enum ieee80211_radiotap_type bit; int rc; for (present = presentflags; present; present = next_present) { /* * Clear the least significant bit that is set. */ next_present = present & (present - 1); /* * Get the bit number, within this presence word, * of the remaining least significant bit that * is set. */ bitno = BITNO_32(present ^ next_present); /* * Stop if this is one of the "same meaning * in all presence flags" bits. */ if (bitno >= IEEE80211_RADIOTAP_NAMESPACE) break; /* * Get the radiotap bit number of that bit. */ bit = (enum ieee80211_radiotap_type)(bit0 + bitno); rc = print_radiotap_field(ndo, s, bit, flags, presentflags); if (rc != 0) return rc; } return 0; } u_int ieee802_11_radio_print(netdissect_options *ndo, const u_char *p, u_int length, u_int caplen) { #define BIT(n) (1U << n) #define IS_EXTENDED(__p) \ (GET_LE_U_4(__p) & BIT(IEEE80211_RADIOTAP_EXT)) != 0 struct cpack_state cpacker; const struct ieee80211_radiotap_header *hdr; uint32_t presentflags; const nd_uint32_t *presentp, *last_presentp; int vendor_namespace; uint8_t vendor_oui[3]; uint8_t vendor_subnamespace; uint16_t skip_length; int bit0; u_int len; uint8_t flags; int pad; u_int fcslen; ndo->ndo_protocol = "802.11_radio"; if (caplen < sizeof(*hdr)) { nd_print_trunc(ndo); return caplen; } hdr = (const struct ieee80211_radiotap_header *)p; len = GET_LE_U_2(hdr->it_len); if (len < sizeof(*hdr)) { /* * The length is the length of the entire header, so * it must be as large as the fixed-length part of * the header. */ nd_print_trunc(ndo); return caplen; } /* * If we don't have the entire radiotap header, just give up. */ if (caplen < len) { nd_print_trunc(ndo); return caplen; } nd_cpack_init(&cpacker, (const uint8_t *)hdr, len); /* align against header start */ nd_cpack_advance(&cpacker, sizeof(*hdr)); /* includes the 1st bitmap */ for (last_presentp = &hdr->it_present; (const u_char*)(last_presentp + 1) <= p + len && IS_EXTENDED(last_presentp); last_presentp++) nd_cpack_advance(&cpacker, sizeof(hdr->it_present)); /* more bitmaps */ /* are there more bitmap extensions than bytes in header? */ if ((const u_char*)(last_presentp + 1) > p + len) { nd_print_trunc(ndo); return caplen; } /* * Start out at the beginning of the default radiotap namespace. */ bit0 = 0; vendor_namespace = 0; memset(vendor_oui, 0, 3); vendor_subnamespace = 0; skip_length = 0; /* Assume no flags */ flags = 0; /* Assume no Atheros padding between 802.11 header and body */ pad = 0; /* Assume no FCS at end of frame */ fcslen = 0; for (presentp = &hdr->it_present; presentp <= last_presentp; presentp++) { presentflags = GET_LE_U_4(presentp); /* * If this is a vendor namespace, we don't handle it. */ if (vendor_namespace) { /* * Skip past the stuff we don't understand. * If we add support for any vendor namespaces, * it'd be added here; use vendor_oui and * vendor_subnamespace to interpret the fields. */ if (nd_cpack_advance(&cpacker, skip_length) != 0) { /* * Ran out of space in the packet. */ break; } /* * We've skipped it all; nothing more to * skip. */ skip_length = 0; } else { if (print_in_radiotap_namespace(ndo, &cpacker, &flags, presentflags, bit0) != 0) { /* * Fatal error - can't process anything * more in the radiotap header. */ break; } } /* * Handle the namespace switch bits; we've already handled * the extension bit in all but the last word above. */ switch (presentflags & (BIT(IEEE80211_RADIOTAP_NAMESPACE)|BIT(IEEE80211_RADIOTAP_VENDOR_NAMESPACE))) { case 0: /* * We're not changing namespaces. * advance to the next 32 bits in the current * namespace. */ bit0 += 32; break; case BIT(IEEE80211_RADIOTAP_NAMESPACE): /* * We're switching to the radiotap namespace. * Reset the presence-bitmap index to 0, and * reset the namespace to the default radiotap * namespace. */ bit0 = 0; vendor_namespace = 0; memset(vendor_oui, 0, 3); vendor_subnamespace = 0; skip_length = 0; break; case BIT(IEEE80211_RADIOTAP_VENDOR_NAMESPACE): /* * We're switching to a vendor namespace. * Reset the presence-bitmap index to 0, * note that we're in a vendor namespace, * and fetch the fields of the Vendor Namespace * item. */ bit0 = 0; vendor_namespace = 1; if ((nd_cpack_align_and_reserve(&cpacker, 2)) == NULL) { nd_print_trunc(ndo); break; } if (nd_cpack_uint8(ndo, &cpacker, &vendor_oui[0]) != 0) { nd_print_trunc(ndo); break; } if (nd_cpack_uint8(ndo, &cpacker, &vendor_oui[1]) != 0) { nd_print_trunc(ndo); break; } if (nd_cpack_uint8(ndo, &cpacker, &vendor_oui[2]) != 0) { nd_print_trunc(ndo); break; } if (nd_cpack_uint8(ndo, &cpacker, &vendor_subnamespace) != 0) { nd_print_trunc(ndo); break; } if (nd_cpack_uint16(ndo, &cpacker, &skip_length) != 0) { nd_print_trunc(ndo); break; } break; default: /* * Illegal combination. The behavior in this * case is undefined by the radiotap spec; we * just ignore both bits. */ break; } } if (flags & IEEE80211_RADIOTAP_F_DATAPAD) pad = 1; /* Atheros padding */ if (flags & IEEE80211_RADIOTAP_F_FCS) fcslen = 4; /* FCS at end of packet */ return len + ieee802_11_print(ndo, p + len, length - len, caplen - len, pad, fcslen); #undef BITNO_32 #undef BITNO_16 #undef BITNO_8 #undef BITNO_4 #undef BITNO_2 #undef BIT } static u_int ieee802_11_radio_avs_print(netdissect_options *ndo, const u_char *p, u_int length, u_int caplen) { uint32_t caphdr_len; ndo->ndo_protocol = "802.11_radio_avs"; if (caplen < 8) { nd_print_trunc(ndo); return caplen; } caphdr_len = GET_BE_U_4(p + 4); if (caphdr_len < 8) { /* * Yow! The capture header length is claimed not * to be large enough to include even the version * cookie or capture header length! */ nd_print_trunc(ndo); return caplen; } if (caplen < caphdr_len) { nd_print_trunc(ndo); return caplen; } return caphdr_len + ieee802_11_print(ndo, p + caphdr_len, length - caphdr_len, caplen - caphdr_len, 0, 0); } #define PRISM_HDR_LEN 144 #define WLANCAP_MAGIC_COOKIE_BASE 0x80211000 #define WLANCAP_MAGIC_COOKIE_V1 0x80211001 #define WLANCAP_MAGIC_COOKIE_V2 0x80211002 /* * For DLT_PRISM_HEADER; like DLT_IEEE802_11, but with an extra header, * containing information such as radio information, which we * currently ignore. * * If, however, the packet begins with WLANCAP_MAGIC_COOKIE_V1 or * WLANCAP_MAGIC_COOKIE_V2, it's really DLT_IEEE802_11_RADIO_AVS * (currently, on Linux, there's no ARPHRD_ type for * DLT_IEEE802_11_RADIO_AVS, as there is a ARPHRD_IEEE80211_PRISM * for DLT_PRISM_HEADER, so ARPHRD_IEEE80211_PRISM is used for * the AVS header, and the first 4 bytes of the header are used to * indicate whether it's a Prism header or an AVS header). */ void prism_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h, const u_char *p) { u_int caplen = h->caplen; u_int length = h->len; uint32_t msgcode; ndo->ndo_protocol = "prism"; if (caplen < 4) { nd_print_trunc(ndo); ndo->ndo_ll_hdr_len += caplen; return; } msgcode = GET_BE_U_4(p); if (msgcode == WLANCAP_MAGIC_COOKIE_V1 || msgcode == WLANCAP_MAGIC_COOKIE_V2) { ndo->ndo_ll_hdr_len += ieee802_11_radio_avs_print(ndo, p, length, caplen); return; } if (caplen < PRISM_HDR_LEN) { nd_print_trunc(ndo); ndo->ndo_ll_hdr_len += caplen; return; } p += PRISM_HDR_LEN; length -= PRISM_HDR_LEN; caplen -= PRISM_HDR_LEN; ndo->ndo_ll_hdr_len += PRISM_HDR_LEN; ndo->ndo_ll_hdr_len += ieee802_11_print(ndo, p, length, caplen, 0, 0); } /* * For DLT_IEEE802_11_RADIO; like DLT_IEEE802_11, but with an extra * header, containing information such as radio information. */ void ieee802_11_radio_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h, const u_char *p) { ndo->ndo_protocol = "802.11_radio"; ndo->ndo_ll_hdr_len += ieee802_11_radio_print(ndo, p, h->len, h->caplen); } /* * For DLT_IEEE802_11_RADIO_AVS; like DLT_IEEE802_11, but with an * extra header, containing information such as radio information, * which we currently ignore. */ void ieee802_11_radio_avs_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h, const u_char *p) { ndo->ndo_protocol = "802.11_radio_avs"; ndo->ndo_ll_hdr_len += ieee802_11_radio_avs_print(ndo, p, h->len, h->caplen); }