diff options
Diffstat (limited to '')
| -rw-r--r-- | src/libvterm/doc/URLs | 14 | ||||
| -rw-r--r-- | src/libvterm/doc/seqs.txt | 283 |
2 files changed, 297 insertions, 0 deletions
diff --git a/src/libvterm/doc/URLs b/src/libvterm/doc/URLs new file mode 100644 index 0000000..8380f5c --- /dev/null +++ b/src/libvterm/doc/URLs @@ -0,0 +1,14 @@ +ECMA-48: + http://www.ecma-international.org/publications/standards/Ecma-048.htm + +Xterm Control Sequences: + http://invisible-island.net/xterm/ctlseqs/ctlseqs.html + +Digital VT100 User Guide: + http://vt100.net/docs/vt100-ug/ + +Digital VT220 Programmer Reference Manual + http://vt100.net/docs/vt220-rm/ + +Summary of ANSI standards for ASCII terminals + http://www.inwap.com/pdp10/ansicode.txt diff --git a/src/libvterm/doc/seqs.txt b/src/libvterm/doc/seqs.txt new file mode 100644 index 0000000..27f28b9 --- /dev/null +++ b/src/libvterm/doc/seqs.txt @@ -0,0 +1,283 @@ +Sequences documented in parens are implicit ones from parser.c, which move +between states. + +1 = VT100 +2 = VT220 +3 = VT320 +x = xterm + + C0 controls + +123 0x00 = NUL +123x 0x07 = BEL +123x 0x08 = BS +123x 0x09 = HT +123x 0x0A = LF +123x 0x0B = VT +123x 0x0C = FF +123x 0x0D = CR +123x 0x0E = LS1 +123x 0x0F = LS0 + (0x18 = CAN) + (0x1A = SUB) + (0x1B = ESC) + +123 0x7f = DEL (ignored) + + C1 controls + +123x 0x84 = IND +123x 0x85 = NEL +123x 0x88 = HTS +123x 0x8D = RI + 23x 0x8E = SS2 + 23x 0x8F = SS3 + (0x90 = DCS) + (0x98 = SOS) + (0x9B = CSI) + (0x9C = ST) + (0x9D = OSC) + (0x9E = PM) + (0x9F = APC) + + Escape sequences + - excluding sequences that are C1 aliases + +123x ESC ( = SCS, select character set G0 +123x ESC ) = SCS, select character set G1 + 23x ESC * = SCS, select character set G2 + 23x ESC + = SCS, select character set G3 +123x ESC 7 = DECSC - save cursor +123x ESC 8 = DECRC - restore cursor +123x ESC # 3 = DECDHL, double-height line (top half) +123x ESC # 4 = DECDHL, double-height line (bottom half) +123x ESC # 5 = DECSWL, single-width single-height line +123x ESC # 6 = DECDWL, double-width single-height line +123x ESC # 8 = DECALN +123 ESC < = Ignored (used by VT100 to exit VT52 mode) +123x ESC = = DECKPAM, keypad application mode +123x ESC > = DECKPNM, keypad numeric mode + 23x ESC Sp F = S7C1T + 23x ESC Sp G = S8C1T + (ESC P = DCS) + (ESC X = SOS) + (ESC [ = CSI) + (ESC \ = ST) + (ESC ] = OSC) + (ESC ^ = PM) + (ESC _ = APC) +123x ESC c = RIS, reset initial state + 3x ESC n = LS2 + 3x ESC o = LS3 + 3x ESC | = LS3R + 3x ESC } = LS2R + 3x ESC ~ = LS1R + + DCSes + + 3x DCS $ q ST = DECRQSS + 3x m = Request SGR + x Sp q = Request DECSCUSR + 3x " q = Request DECSCA + 3x r = Request DECSTBM + x s = Request DECSLRM + + CSIs + 23x CSI @ = ICH +123x CSI A = CUU +123x CSI B = CUD +123x CSI C = CUF +123x CSI D = CUB + x CSI E = CNL + x CSI F = CPL + x CSI G = CHA +123x CSI H = CUP + x CSI I = CHT +123x CSI J = ED + 23x CSI ? J = DECSED, selective erase in display +123x CSI K = EL + 23x CSI ? K = DECSEL, selective erase in line + 23x CSI L = IL + 23x CSI M = DL + 23x CSI P = DCH + x CSI S = SU + x CSI T = SD + 23x CSI X = ECH + x CSI Z = CBT + x CSI ` = HPA + x CSI a = HPR + x CSI b = REP +123x CSI c = DA, device attributes +123 0 = DA + 23x CSI > c = DECSDA + 23 0 = SDA + x CSI d = VPA + x CSI e = VPR +123x CSI f = HVP +123x CSI g = TBC +123x CSI h = SM, Set mode +123x CSI ? h = DECSM, DEC set mode + CSI j = HPB + CSI k = VPB +123x CSI l = RM, Reset mode +123x CSI ? l = DECRM, DEC reset mode +123x CSI m = SGR, Set Graphic Rendition + CSI ? m = DECSGR, private Set Graphic Rendition +123x CSI n = DSR, Device Status Report + 23x 5 = operating status + 23x 6 = CPR = cursor position + 23x CSI ? n = DECDSR; behaves as DSR but uses CSI ? instead of CSI to respond + 23x CSI ! p = DECSTR, soft terminal reset + 3x CSI ? $ p = DECRQM, request private mode + x CSI Sp q = DECSCUSR (odd numbers blink, even numbers solid) + 1 or 2 = block + 3 or 4 = underline + 5 or 6 = I-beam to left + x CSI > q = XTVERSION, request version string + 23x CSI " q = DECSCA, select character attributes +123x CSI r = DECSTBM + x CSI s = DECSLRM + x CSI ' } = DECIC + x CSI ' ~ = DECDC + + OSCs + + x OSC 0; = Set icon name and title + x OSC 1; = Set icon name + x OSC 2; = Set title + x OSC 52; = Selection management + + Standard modes + + 23x SM 4 = IRM +123x SM 20 = NLM, linefeed/newline + + DEC modes + +123x DECSM 1 = DECCKM, cursor keys +123x DECSM 5 = DECSCNM, screen +123x DECSM 6 = DECOM, origin +123x DECSM 7 = DECAWM, autowrap + x DECSM 12 = Cursor blink + 23x DECSM 25 = DECTCEM, text cursor enable + x DECSM 69 = DECVSSM, vertical screen split + x DECSM 1000 = Mouse click/release tracking + x DECSM 1002 = Mouse click/release/drag tracking + x DECSM 1003 = Mouse all movements tracking + x DECSM 1004 = Focus in/out reporting + x DECSM 1005 = Mouse protocol extended (UTF-8) - not recommended + x DECSM 1006 = Mouse protocol SGR + x DECSM 1015 = Mouse protocol rxvt + x DECSM 1047 = Altscreen + x DECSM 1048 = Save cursor + x DECSM 1049 = 1047 + 1048 + x DECSM 2004 = Bracketed paste + + Graphic Renditions + +123x SGR 0 = Reset +123x SGR 1 = Bold on + x SGR 3 = Italic on +123x SGR 4 = Underline single + SGR 4:x = Underline style +123x SGR 5 = Blink on +123x SGR 7 = Reverse on + x SGR 8 = Conceal on + x SGR 9 = Strikethrough on + SGR 10-19 = Select font + x SGR 21 = Underline double + 23x SGR 22 = Bold off + x SGR 23 = Italic off + 23x SGR 24 = Underline off + 23x SGR 25 = Blink off + 23x SGR 27 = Reverse off + x SGR 28 = Conceal off + x SGR 29 = Strikethrough off + x SGR 30-37 = Foreground ANSI + x SGR 38 = Foreground alternative palette + x SGR 39 = Foreground default + x SGR 40-47 = Background ANSI + x SGR 48 = Background alternative palette + x SGR 49 = Background default + SGR 73 = Superscript on + SGR 74 = Subscript on + SGR 75 = Superscript/subscript off + x SGR 90-97 = Foreground ANSI high-intensity + x SGR 100-107 = Background ANSI high-intensity + +The state storage used by ESC 7 and DECSM 1048/1049 is shared. + + Unimplemented sequences: + +The following sequences are not recognised by libvterm. + +123x 0x05 = ENQ + 3 0x11 = DC1 (XON) + 3 0x13 = DC3 (XOFF) + x ESC % @ = Select default character set + x ESC % G = Select UTF-8 character set + x ESC 6 = DECBI, Back Index +12 ESC Z = DECID, identify terminal + x DCS + Q = XTGETXRES, Request resource values + DCS $ q = [DECRQSS] + 3x " p = Request DECSCL + x t = Request DECSLPP + x $ | = Request DECSCPP + x * | = Request DECSLNS + 3 $ } = Request DECSASD + 3 $ ~ = Request DECSSDT + x DCS + p = XTSETTCAP, set termcap/terminfo data + x DCS + q = XTGETTCAP, request termcap/terminfo + 23 DCS { = DECDLD, down-line-loadable character set + 23x DCS | = DECUDK, user-defined key + x CSI Sp @ = Shift left columns + x CSI Sp A = Shift right columns + x CSI # P = XTPUSHCOLORS, push current dynamic colours to stack + x CSI # Q = XTPOPCOLORS, pop dynamic colours from stack + x CSI # R = XTREPORTCOLORS, report current entry on palette stack + x CSI ? S = XTSMGRAPHICS, set/request graphics attribute + x CSI > T = XTRMTITLE, reset title mode features + 23x CSI i = DEC printer control + x CSI > m = XTMODKEYS, set key modifier options + x CSI > n = (XTMODKEYS), reset key modifier options + x CSI $ p = DECRQM, request ANSI mode + 23x CSI " p = DECSCL, set compatibility level + x CSI > p = XTSMPOINTER, set resource value pointer mode +1 x CSI q = DECLL, load LEDs + x CSI ? r = XTRESTORE, restore DEC private mode values + x CSI $ r = DECCARA, change attributes in rectangular area + x CSI > s = XTSHIFTESCAPE, set/reset shift-escape options + x CSI ? s = XTSAVE, save DEC private mode values + x CSI t = XTWINOPS, window operations + x CSI > t = XTSMTITLE, set title mode features + x CSI $ t = DECRARA, reset attributes in rectangular area + 3 CSI $ u = DECRQTSR, request terminal state report + 3 1 = terminal state report + 3 CSI & u = DECRQUPSS, request user-preferred supplemental set + x CSI $ v = DECCRA, copy rectangular area + 3x CSI $ w = DECRQPSR, request presentation state report + 3x 1 = cursor information report + 3x 2 = tab stop report + x CSI ' w = DECEFR, enable filter rectangle +1 x CSI x = DECREQTPARM, request terminal parameters + x CSI * x = DECSACE, select attribute change extent + x CSI $ x = DECFRA, fill rectangular area +123 CSI y = DECTST, invoke confidence test + x CSI $ z = DECERA, erase rectangular area + x CSI # { = XTPUSHSGR, push video attributes onto stack + x CSI $ { = DECSERA, selective erase in rectangular area + x CSI # | = XTREPORTSGR, report selected graphic rendition + x CSI $ | = DECSCPP, select columns per page + x CSI # } = XTPOPSGR, pop video attributes from stack + 3 CSI $ } = DECSASD, select active status display + 3 CSI $ ~ = DECSSDT, select status line type + 23 SM 2 = KAM, keyboard action +123 SM 12 = SRM, send/receive +123 DECSM 2 = DECANM, ANSI/VT52 +123 DECSM 3 = DECCOLM, 132 column +123 DECSM 4 = DECSCLM, scrolling +123 DECSM 8 = DECARM, auto-repeat +12 DECSM 9 = DECINLM, interlace + 23 DECSM 18 = DECPFF, print form feed + 23 DECSM 19 = DECPEX, print extent + 23 DECSM 42 = DECNRCM, national/multinational character |