diff options
Diffstat (limited to 'src/VBox/ValidationKit/vms/t-nt310.txt')
-rw-r--r-- | src/VBox/ValidationKit/vms/t-nt310.txt | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/src/VBox/ValidationKit/vms/t-nt310.txt b/src/VBox/ValidationKit/vms/t-nt310.txt new file mode 100644 index 00000000..32db4621 --- /dev/null +++ b/src/VBox/ValidationKit/vms/t-nt310.txt @@ -0,0 +1,27 @@ + +Test VM - t-nt310 - Windows NT 3.1 no service pack +================================================== + +Setup: + - Configure a VM t-nt310 with using the Windows NT 3.x settings, but with only + 64 MiB RAM (can't detect more) and 512 MiB disk (2GiB fails NTFS conversion). + - Enable COM1. + - Make sure networking is NAT and PCNET. + - Make sure you're using BusLogic for both HD and DVD-ROM. + - Enable DNS proxying: + VBoxManage modifyvm t-nt310 --natdnsproxy1 on. + - Optionally set 486 as the CPU profile (may avoid install problems): + VBoxManage modifyvm t-nt310 --cpu-profile "Intel 80486" + - Install the OS. + - PCNet are not included on install media, so get them of the + net and install via floppy when it fails to detect NICs. + - Use 'password' as Administrator password. + - Open the system settings and add an environment variable "SystemDrive" with the + value "C:" (NT 3.50 and later sets this automagically). + - While in the system settings, reduce the boot wait to 1 second. + - Open the network settings and add the TCPIP protocol. Configure it with IP + 10.0.2.15/24, gateway 10.0.2.2, and DNS 10.0.2.3 (via "Connections..." button). + - Reboot and check that you can ping stuff. + - Insert the ValidationKit ISO and install the test execution service, see + vboxtxs-readme.txt for details. Needs the NT 3.x bits. + - Proceed as shown in readme_first.txt |