From eac54b7c4aec25060d7bd856f7cdc290943d6aae Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 23:12:04 +0200 Subject: Adding upstream version 5.4.1. Signed-off-by: Daniel Baumann --- src/xz/xz.1 | 3020 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3020 insertions(+) create mode 100644 src/xz/xz.1 (limited to 'src/xz/xz.1') diff --git a/src/xz/xz.1 b/src/xz/xz.1 new file mode 100644 index 0000000..caa5a06 --- /dev/null +++ b/src/xz/xz.1 @@ -0,0 +1,3020 @@ +'\" t +.\" +.\" Author: Lasse Collin +.\" +.\" This file has been put into the public domain. +.\" You can do whatever you want with this file. +.\" +.TH XZ 1 "2022-12-01" "Tukaani" "XZ Utils" +. +.SH NAME +xz, unxz, xzcat, lzma, unlzma, lzcat \- Compress or decompress .xz and .lzma files +. +.SH SYNOPSIS +.B xz +.RI [ option... ] +.RI [ file... ] +. +.SH COMMAND ALIASES +.B unxz +is equivalent to +.BR "xz \-\-decompress" . +.br +.B xzcat +is equivalent to +.BR "xz \-\-decompress \-\-stdout" . +.br +.B lzma +is equivalent to +.BR "xz \-\-format=lzma" . +.br +.B unlzma +is equivalent to +.BR "xz \-\-format=lzma \-\-decompress" . +.br +.B lzcat +is equivalent to +.BR "xz \-\-format=lzma \-\-decompress \-\-stdout" . +.PP +When writing scripts that need to decompress files, +it is recommended to always use the name +.B xz +with appropriate arguments +.RB ( "xz \-d" +or +.BR "xz \-dc" ) +instead of the names +.B unxz +and +.BR xzcat . +. +.SH DESCRIPTION +.B xz +is a general-purpose data compression tool with +command line syntax similar to +.BR gzip (1) +and +.BR bzip2 (1). +The native file format is the +.B .xz +format, but the legacy +.B .lzma +format used by LZMA Utils and +raw compressed streams with no container format headers +are also supported. +In addition, decompression of the +.B .lz +format used by +.B lzip +is supported. +.PP +.B xz +compresses or decompresses each +.I file +according to the selected operation mode. +If no +.I files +are given or +.I file +is +.BR \- , +.B xz +reads from standard input and writes the processed data +to standard output. +.B xz +will refuse (display an error and skip the +.IR file ) +to write compressed data to standard output if it is a terminal. +Similarly, +.B xz +will refuse to read compressed data +from standard input if it is a terminal. +.PP +Unless +.B \-\-stdout +is specified, +.I files +other than +.B \- +are written to a new file whose name is derived from the source +.I file +name: +.IP \(bu 3 +When compressing, the suffix of the target file format +.RB ( .xz +or +.BR .lzma ) +is appended to the source filename to get the target filename. +.IP \(bu 3 +When decompressing, the +.BR .xz , +.BR .lzma , +or +.B .lz +suffix is removed from the filename to get the target filename. +.B xz +also recognizes the suffixes +.B .txz +and +.BR .tlz , +and replaces them with the +.B .tar +suffix. +.PP +If the target file already exists, an error is displayed and the +.I file +is skipped. +.PP +Unless writing to standard output, +.B xz +will display a warning and skip the +.I file +if any of the following applies: +.IP \(bu 3 +.I File +is not a regular file. +Symbolic links are not followed, +and thus they are not considered to be regular files. +.IP \(bu 3 +.I File +has more than one hard link. +.IP \(bu 3 +.I File +has setuid, setgid, or sticky bit set. +.IP \(bu 3 +The operation mode is set to compress and the +.I file +already has a suffix of the target file format +.RB ( .xz +or +.B .txz +when compressing to the +.B .xz +format, and +.B .lzma +or +.B .tlz +when compressing to the +.B .lzma +format). +.IP \(bu 3 +The operation mode is set to decompress and the +.I file +doesn't have a suffix of any of the supported file formats +.RB ( .xz , +.BR .txz , +.BR .lzma , +.BR .tlz , +or +.BR .lz ). +.PP +After successfully compressing or decompressing the +.IR file , +.B xz +copies the owner, group, permissions, access time, +and modification time from the source +.I file +to the target file. +If copying the group fails, the permissions are modified +so that the target file doesn't become accessible to users +who didn't have permission to access the source +.IR file . +.B xz +doesn't support copying other metadata like access control lists +or extended attributes yet. +.PP +Once the target file has been successfully closed, the source +.I file +is removed unless +.B \-\-keep +was specified. +The source +.I file +is never removed if the output is written to standard output +or if an error occurs. +.PP +Sending +.B SIGINFO +or +.B SIGUSR1 +to the +.B xz +process makes it print progress information to standard error. +This has only limited use since when standard error +is a terminal, using +.B \-\-verbose +will display an automatically updating progress indicator. +. +.SS "Memory usage" +The memory usage of +.B xz +varies from a few hundred kilobytes to several gigabytes +depending on the compression settings. +The settings used when compressing a file determine +the memory requirements of the decompressor. +Typically the decompressor needs 5\ % to 20\ % of +the amount of memory that the compressor needed when +creating the file. +For example, decompressing a file created with +.B xz \-9 +currently requires 65\ MiB of memory. +Still, it is possible to have +.B .xz +files that require several gigabytes of memory to decompress. +.PP +Especially users of older systems may find +the possibility of very large memory usage annoying. +To prevent uncomfortable surprises, +.B xz +has a built-in memory usage limiter, which is disabled by default. +While some operating systems provide ways to limit +the memory usage of processes, relying on it +wasn't deemed to be flexible enough (for example, using +.BR ulimit (1) +to limit virtual memory tends to cripple +.BR mmap (2)). +.PP +The memory usage limiter can be enabled with +the command line option \fB\-\-memlimit=\fIlimit\fR. +Often it is more convenient to enable the limiter +by default by setting the environment variable +.BR XZ_DEFAULTS , +for example, +.BR XZ_DEFAULTS=\-\-memlimit=150MiB . +It is possible to set the limits separately +for compression and decompression by using +.BI \-\-memlimit\-compress= limit +and \fB\-\-memlimit\-decompress=\fIlimit\fR. +Using these two options outside +.B XZ_DEFAULTS +is rarely useful because a single run of +.B xz +cannot do both compression and decompression and +.BI \-\-memlimit= limit +(or +.B \-M +.IR limit ) +is shorter to type on the command line. +.PP +If the specified memory usage limit is exceeded when decompressing, +.B xz +will display an error and decompressing the file will fail. +If the limit is exceeded when compressing, +.B xz +will try to scale the settings down so that the limit +is no longer exceeded (except when using +.B \-\-format=raw +or +.BR \-\-no\-adjust ). +This way the operation won't fail unless the limit is very small. +The scaling of the settings is done in steps that don't +match the compression level presets, for example, if the limit is +only slightly less than the amount required for +.BR "xz \-9" , +the settings will be scaled down only a little, +not all the way down to +.BR "xz \-8" . +. +.SS "Concatenation and padding with .xz files" +It is possible to concatenate +.B .xz +files as is. +.B xz +will decompress such files as if they were a single +.B .xz +file. +.PP +It is possible to insert padding between the concatenated parts +or after the last part. +The padding must consist of null bytes and the size +of the padding must be a multiple of four bytes. +This can be useful, for example, if the +.B .xz +file is stored on a medium that measures file sizes +in 512-byte blocks. +.PP +Concatenation and padding are not allowed with +.B .lzma +files or raw streams. +. +.SH OPTIONS +. +.SS "Integer suffixes and special values" +In most places where an integer argument is expected, +an optional suffix is supported to easily indicate large integers. +There must be no space between the integer and the suffix. +.TP +.B KiB +Multiply the integer by 1,024 (2^10). +.BR Ki , +.BR k , +.BR kB , +.BR K , +and +.B KB +are accepted as synonyms for +.BR KiB . +.TP +.B MiB +Multiply the integer by 1,048,576 (2^20). +.BR Mi , +.BR m , +.BR M , +and +.B MB +are accepted as synonyms for +.BR MiB . +.TP +.B GiB +Multiply the integer by 1,073,741,824 (2^30). +.BR Gi , +.BR g , +.BR G , +and +.B GB +are accepted as synonyms for +.BR GiB . +.PP +The special value +.B max +can be used to indicate the maximum integer value +supported by the option. +. +.SS "Operation mode" +If multiple operation mode options are given, +the last one takes effect. +.TP +.BR \-z ", " \-\-compress +Compress. +This is the default operation mode when no operation mode option +is specified and no other operation mode is implied from +the command name (for example, +.B unxz +implies +.BR \-\-decompress ). +.TP +.BR \-d ", " \-\-decompress ", " \-\-uncompress +Decompress. +.TP +.BR \-t ", " \-\-test +Test the integrity of compressed +.IR files . +This option is equivalent to +.B "\-\-decompress \-\-stdout" +except that the decompressed data is discarded instead of being +written to standard output. +No files are created or removed. +.TP +.BR \-l ", " \-\-list +Print information about compressed +.IR files . +No uncompressed output is produced, +and no files are created or removed. +In list mode, the program cannot read +the compressed data from standard +input or from other unseekable sources. +.IP "" +The default listing shows basic information about +.IR files , +one file per line. +To get more detailed information, use also the +.B \-\-verbose +option. +For even more information, use +.B \-\-verbose +twice, but note that this may be slow, because getting all the extra +information requires many seeks. +The width of verbose output exceeds +80 characters, so piping the output to, for example, +.B "less\ \-S" +may be convenient if the terminal isn't wide enough. +.IP "" +The exact output may vary between +.B xz +versions and different locales. +For machine-readable output, +.B \-\-robot \-\-list +should be used. +. +.SS "Operation modifiers" +.TP +.BR \-k ", " \-\-keep +Don't delete the input files. +.IP "" +Since +.B xz +5.2.6, +this option also makes +.B xz +compress or decompress even if the input is +a symbolic link to a regular file, +has more than one hard link, +or has the setuid, setgid, or sticky bit set. +The setuid, setgid, and sticky bits are not copied +to the target file. +In earlier versions this was only done with +.BR \-\-force . +.TP +.BR \-f ", " \-\-force +This option has several effects: +.RS +.IP \(bu 3 +If the target file already exists, +delete it before compressing or decompressing. +.IP \(bu 3 +Compress or decompress even if the input is +a symbolic link to a regular file, +has more than one hard link, +or has the setuid, setgid, or sticky bit set. +The setuid, setgid, and sticky bits are not copied +to the target file. +.IP \(bu 3 +When used with +.B \-\-decompress +.B \-\-stdout +and +.B xz +cannot recognize the type of the source file, +copy the source file as is to standard output. +This allows +.B xzcat +.B \-\-force +to be used like +.BR cat (1) +for files that have not been compressed with +.BR xz . +Note that in future, +.B xz +might support new compressed file formats, which may make +.B xz +decompress more types of files instead of copying them as is to +standard output. +.BI \-\-format= format +can be used to restrict +.B xz +to decompress only a single file format. +.RE +.TP +.BR \-c ", " \-\-stdout ", " \-\-to\-stdout +Write the compressed or decompressed data to +standard output instead of a file. +This implies +.BR \-\-keep . +.TP +.B \-\-single\-stream +Decompress only the first +.B .xz +stream, and +silently ignore possible remaining input data following the stream. +Normally such trailing garbage makes +.B xz +display an error. +.IP "" +.B xz +never decompresses more than one stream from +.B .lzma +files or raw streams, but this option still makes +.B xz +ignore the possible trailing data after the +.B .lzma +file or raw stream. +.IP "" +This option has no effect if the operation mode is not +.B \-\-decompress +or +.BR \-\-test . +.TP +.B \-\-no\-sparse +Disable creation of sparse files. +By default, if decompressing into a regular file, +.B xz +tries to make the file sparse if the decompressed data contains +long sequences of binary zeros. +It also works when writing to standard output +as long as standard output is connected to a regular file +and certain additional conditions are met to make it safe. +Creating sparse files may save disk space and speed up +the decompression by reducing the amount of disk I/O. +.TP +\fB\-S\fR \fI.suf\fR, \fB\-\-suffix=\fI.suf +When compressing, use +.I .suf +as the suffix for the target file instead of +.B .xz +or +.BR .lzma . +If not writing to standard output and +the source file already has the suffix +.IR .suf , +a warning is displayed and the file is skipped. +.IP "" +When decompressing, recognize files with the suffix +.I .suf +in addition to files with the +.BR .xz , +.BR .txz , +.BR .lzma , +.BR .tlz , +or +.B .lz +suffix. +If the source file has the suffix +.IR .suf , +the suffix is removed to get the target filename. +.IP "" +When compressing or decompressing raw streams +.RB ( \-\-format=raw ), +the suffix must always be specified unless +writing to standard output, +because there is no default suffix for raw streams. +.TP +\fB\-\-files\fR[\fB=\fIfile\fR] +Read the filenames to process from +.IR file ; +if +.I file +is omitted, filenames are read from standard input. +Filenames must be terminated with the newline character. +A dash +.RB ( \- ) +is taken as a regular filename; it doesn't mean standard input. +If filenames are given also as command line arguments, they are +processed before the filenames read from +.IR file . +.TP +\fB\-\-files0\fR[\fB=\fIfile\fR] +This is identical to \fB\-\-files\fR[\fB=\fIfile\fR] except +that each filename must be terminated with the null character. +. +.SS "Basic file format and compression options" +.TP +\fB\-F\fR \fIformat\fR, \fB\-\-format=\fIformat +Specify the file +.I format +to compress or decompress: +.RS +.TP +.B auto +This is the default. +When compressing, +.B auto +is equivalent to +.BR xz . +When decompressing, +the format of the input file is automatically detected. +Note that raw streams (created with +.BR \-\-format=raw ) +cannot be auto-detected. +.TP +.B xz +Compress to the +.B .xz +file format, or accept only +.B .xz +files when decompressing. +.TP +.BR lzma ", " alone +Compress to the legacy +.B .lzma +file format, or accept only +.B .lzma +files when decompressing. +The alternative name +.B alone +is provided for backwards compatibility with LZMA Utils. +.TP +.B lzip +Accept only +.B .lz +files when decompressing. +Compression is not supported. +.IP "" +The +.B .lz +format version 0 and the unextended version 1 are supported. +Version 0 files were produced by +.B lzip +1.3 and older. +Such files aren't common but may be found from file archives +as a few source packages were released in this format. +People might have old personal files in this format too. +Decompression support for the format version 0 was removed in +.B lzip +1.18. +.IP "" +.B lzip +1.4 and later create files in the format version 1. +The sync flush marker extension to the format version 1 was added in +.B lzip +1.6. +This extension is rarely used and isn't supported by +.B xz +(diagnosed as corrupt input). +.TP +.B raw +Compress or uncompress a raw stream (no headers). +This is meant for advanced users only. +To decode raw streams, you need use +.B \-\-format=raw +and explicitly specify the filter chain, +which normally would have been stored in the container headers. +.RE +.TP +\fB\-C\fR \fIcheck\fR, \fB\-\-check=\fIcheck +Specify the type of the integrity check. +The check is calculated from the uncompressed data and +stored in the +.B .xz +file. +This option has an effect only when compressing into the +.B .xz +format; the +.B .lzma +format doesn't support integrity checks. +The integrity check (if any) is verified when the +.B .xz +file is decompressed. +.IP "" +Supported +.I check +types: +.RS +.TP +.B none +Don't calculate an integrity check at all. +This is usually a bad idea. +This can be useful when integrity of the data is verified +by other means anyway. +.TP +.B crc32 +Calculate CRC32 using the polynomial from IEEE-802.3 (Ethernet). +.TP +.B crc64 +Calculate CRC64 using the polynomial from ECMA-182. +This is the default, since it is slightly better than CRC32 +at detecting damaged files and the speed difference is negligible. +.TP +.B sha256 +Calculate SHA-256. +This is somewhat slower than CRC32 and CRC64. +.RE +.IP "" +Integrity of the +.B .xz +headers is always verified with CRC32. +It is not possible to change or disable it. +.TP +.B \-\-ignore\-check +Don't verify the integrity check of the compressed data when decompressing. +The CRC32 values in the +.B .xz +headers will still be verified normally. +.IP "" +.B "Do not use this option unless you know what you are doing." +Possible reasons to use this option: +.RS +.IP \(bu 3 +Trying to recover data from a corrupt .xz file. +.IP \(bu 3 +Speeding up decompression. +This matters mostly with SHA-256 or +with files that have compressed extremely well. +It's recommended to not use this option for this purpose +unless the file integrity is verified externally in some other way. +.RE +.TP +.BR \-0 " ... " \-9 +Select a compression preset level. +The default is +.BR \-6 . +If multiple preset levels are specified, +the last one takes effect. +If a custom filter chain was already specified, setting +a compression preset level clears the custom filter chain. +.IP "" +The differences between the presets are more significant than with +.BR gzip (1) +and +.BR bzip2 (1). +The selected compression settings determine +the memory requirements of the decompressor, +thus using a too high preset level might make it painful +to decompress the file on an old system with little RAM. +Specifically, +.B "it's not a good idea to blindly use \-9 for everything" +like it often is with +.BR gzip (1) +and +.BR bzip2 (1). +.RS +.TP +.BR "\-0" " ... " "\-3" +These are somewhat fast presets. +.B \-0 +is sometimes faster than +.B "gzip \-9" +while compressing much better. +The higher ones often have speed comparable to +.BR bzip2 (1) +with comparable or better compression ratio, +although the results +depend a lot on the type of data being compressed. +.TP +.BR "\-4" " ... " "\-6" +Good to very good compression while keeping +decompressor memory usage reasonable even for old systems. +.B \-6 +is the default, which is usually a good choice +for distributing files that need to be decompressible +even on systems with only 16\ MiB RAM. +.RB ( \-5e +or +.B \-6e +may be worth considering too. +See +.BR \-\-extreme .) +.TP +.B "\-7 ... \-9" +These are like +.B \-6 +but with higher compressor and decompressor memory requirements. +These are useful only when compressing files bigger than +8\ MiB, 16\ MiB, and 32\ MiB, respectively. +.RE +.IP "" +On the same hardware, the decompression speed is approximately +a constant number of bytes of compressed data per second. +In other words, the better the compression, +the faster the decompression will usually be. +This also means that the amount of uncompressed output +produced per second can vary a lot. +.IP "" +The following table summarises the features of the presets: +.RS +.RS +.PP +.TS +tab(;); +c c c c c +n n n n n. +Preset;DictSize;CompCPU;CompMem;DecMem +\-0;256 KiB;0;3 MiB;1 MiB +\-1;1 MiB;1;9 MiB;2 MiB +\-2;2 MiB;2;17 MiB;3 MiB +\-3;4 MiB;3;32 MiB;5 MiB +\-4;4 MiB;4;48 MiB;5 MiB +\-5;8 MiB;5;94 MiB;9 MiB +\-6;8 MiB;6;94 MiB;9 MiB +\-7;16 MiB;6;186 MiB;17 MiB +\-8;32 MiB;6;370 MiB;33 MiB +\-9;64 MiB;6;674 MiB;65 MiB +.TE +.RE +.RE +.IP "" +Column descriptions: +.RS +.IP \(bu 3 +DictSize is the LZMA2 dictionary size. +It is waste of memory to use a dictionary bigger than +the size of the uncompressed file. +This is why it is good to avoid using the presets +.BR \-7 " ... " \-9 +when there's no real need for them. +At +.B \-6 +and lower, the amount of memory wasted is +usually low enough to not matter. +.IP \(bu 3 +CompCPU is a simplified representation of the LZMA2 settings +that affect compression speed. +The dictionary size affects speed too, +so while CompCPU is the same for levels +.BR \-6 " ... " \-9 , +higher levels still tend to be a little slower. +To get even slower and thus possibly better compression, see +.BR \-\-extreme . +.IP \(bu 3 +CompMem contains the compressor memory requirements +in the single-threaded mode. +It may vary slightly between +.B xz +versions. +Memory requirements of some of the future multithreaded modes may +be dramatically higher than that of the single-threaded mode. +.IP \(bu 3 +DecMem contains the decompressor memory requirements. +That is, the compression settings determine +the memory requirements of the decompressor. +The exact decompressor memory usage is slightly more than +the LZMA2 dictionary size, but the values in the table +have been rounded up to the next full MiB. +.RE +.TP +.BR \-e ", " \-\-extreme +Use a slower variant of the selected compression preset level +.RB ( \-0 " ... " \-9 ) +to hopefully get a little bit better compression ratio, +but with bad luck this can also make it worse. +Decompressor memory usage is not affected, +but compressor memory usage increases a little at preset levels +.BR \-0 " ... " \-3 . +.IP "" +Since there are two presets with dictionary sizes +4\ MiB and 8\ MiB, the presets +.B \-3e +and +.B \-5e +use slightly faster settings (lower CompCPU) than +.B \-4e +and +.BR \-6e , +respectively. +That way no two presets are identical. +.RS +.RS +.PP +.TS +tab(;); +c c c c c +n n n n n. +Preset;DictSize;CompCPU;CompMem;DecMem +\-0e;256 KiB;8;4 MiB;1 MiB +\-1e;1 MiB;8;13 MiB;2 MiB +\-2e;2 MiB;8;25 MiB;3 MiB +\-3e;4 MiB;7;48 MiB;5 MiB +\-4e;4 MiB;8;48 MiB;5 MiB +\-5e;8 MiB;7;94 MiB;9 MiB +\-6e;8 MiB;8;94 MiB;9 MiB +\-7e;16 MiB;8;186 MiB;17 MiB +\-8e;32 MiB;8;370 MiB;33 MiB +\-9e;64 MiB;8;674 MiB;65 MiB +.TE +.RE +.RE +.IP "" +For example, there are a total of four presets that use +8\ MiB dictionary, whose order from the fastest to the slowest is +.BR \-5 , +.BR \-6 , +.BR \-5e , +and +.BR \-6e . +.TP +.B \-\-fast +.PD 0 +.TP +.B \-\-best +.PD +These are somewhat misleading aliases for +.B \-0 +and +.BR \-9 , +respectively. +These are provided only for backwards compatibility +with LZMA Utils. +Avoid using these options. +.TP +.BI \-\-block\-size= size +When compressing to the +.B .xz +format, split the input data into blocks of +.I size +bytes. +The blocks are compressed independently from each other, +which helps with multi-threading and +makes limited random-access decompression possible. +This option is typically used to override the default +block size in multi-threaded mode, +but this option can be used in single-threaded mode too. +.IP "" +In multi-threaded mode about three times +.I size +bytes will be allocated in each thread for buffering input and output. +The default +.I size +is three times the LZMA2 dictionary size or 1 MiB, +whichever is more. +Typically a good value is 2\(en4 times +the size of the LZMA2 dictionary or at least 1 MiB. +Using +.I size +less than the LZMA2 dictionary size is waste of RAM +because then the LZMA2 dictionary buffer will never get fully used. +The sizes of the blocks are stored in the block headers, +which a future version of +.B xz +will use for multi-threaded decompression. +.IP "" +In single-threaded mode no block splitting is done by default. +Setting this option doesn't affect memory usage. +No size information is stored in block headers, +thus files created in single-threaded mode +won't be identical to files created in multi-threaded mode. +The lack of size information also means that a future version of +.B xz +won't be able decompress the files in multi-threaded mode. +.TP +.BI \-\-block\-list= sizes +When compressing to the +.B .xz +format, start a new block after +the given intervals of uncompressed data. +.IP "" +The uncompressed +.I sizes +of the blocks are specified as a comma-separated list. +Omitting a size (two or more consecutive commas) is a shorthand +to use the size of the previous block. +.IP "" +If the input file is bigger than the sum of +.IR sizes , +the last value in +.I sizes +is repeated until the end of the file. +A special value of +.B 0 +may be used as the last value to indicate that +the rest of the file should be encoded as a single block. +.IP "" +If one specifies +.I sizes +that exceed the encoder's block size +(either the default value in threaded mode or +the value specified with \fB\-\-block\-size=\fIsize\fR), +the encoder will create additional blocks while +keeping the boundaries specified in +.IR sizes . +For example, if one specifies +.B \-\-block\-size=10MiB +.B \-\-block\-list=5MiB,10MiB,8MiB,12MiB,24MiB +and the input file is 80 MiB, +one will get 11 blocks: +5, 10, 8, 10, 2, 10, 10, 4, 10, 10, and 1 MiB. +.IP "" +In multi-threaded mode the sizes of the blocks +are stored in the block headers. +This isn't done in single-threaded mode, +so the encoded output won't be +identical to that of the multi-threaded mode. +.TP +.BI \-\-flush\-timeout= timeout +When compressing, if more than +.I timeout +milliseconds (a positive integer) has passed since the previous flush and +reading more input would block, +all the pending input data is flushed from the encoder and +made available in the output stream. +This can be useful if +.B xz +is used to compress data that is streamed over a network. +Small +.I timeout +values make the data available at the receiving end +with a small delay, but large +.I timeout +values give better compression ratio. +.IP "" +This feature is disabled by default. +If this option is specified more than once, the last one takes effect. +The special +.I timeout +value of +.B 0 +can be used to explicitly disable this feature. +.IP "" +This feature is not available on non-POSIX systems. +.IP "" +.\" FIXME +.B "This feature is still experimental." +Currently +.B xz +is unsuitable for decompressing the stream in real time due to how +.B xz +does buffering. +.TP +.BI \-\-memlimit\-compress= limit +Set a memory usage limit for compression. +If this option is specified multiple times, +the last one takes effect. +.IP "" +If the compression settings exceed the +.IR limit , +.B xz +will attempt to adjust the settings downwards so that +the limit is no longer exceeded and display a notice that +automatic adjustment was done. +The adjustments are done in this order: +reducing the number of threads, +switching to single-threaded mode +if even one thread in multi-threaded mode exceeds the +.IR limit , +and finally reducing the LZMA2 dictionary size. +.IP "" +When compressing with +.B \-\-format=raw +or if +.B \-\-no\-adjust +has been specified, +only the number of threads may be reduced +since it can be done without affecting the compressed output. +.IP "" +If the +.I limit +cannot be met even with the adjustments described above, +an error is displayed and +.B xz +will exit with exit status 1. +.IP "" +The +.I limit +can be specified in multiple ways: +.RS +.IP \(bu 3 +The +.I limit +can be an absolute value in bytes. +Using an integer suffix like +.B MiB +can be useful. +Example: +.B "\-\-memlimit\-compress=80MiB" +.IP \(bu 3 +The +.I limit +can be specified as a percentage of total physical memory (RAM). +This can be useful especially when setting the +.B XZ_DEFAULTS +environment variable in a shell initialization script +that is shared between different computers. +That way the limit is automatically bigger +on systems with more memory. +Example: +.B "\-\-memlimit\-compress=70%" +.IP \(bu 3 +The +.I limit +can be reset back to its default value by setting it to +.BR 0 . +This is currently equivalent to setting the +.I limit +to +.B max +(no memory usage limit). +.RE +.IP "" +For 32-bit +.B xz +there is a special case: if the +.I limit +would be over +.BR "4020\ MiB" , +the +.I limit +is set to +.BR "4020\ MiB" . +On MIPS32 +.B "2000\ MiB" +is used instead. +(The values +.B 0 +and +.B max +aren't affected by this. +A similar feature doesn't exist for decompression.) +This can be helpful when a 32-bit executable has access +to 4\ GiB address space (2 GiB on MIPS32) +while hopefully doing no harm in other situations. +.IP "" +See also the section +.BR "Memory usage" . +.TP +.BI \-\-memlimit\-decompress= limit +Set a memory usage limit for decompression. +This also affects the +.B \-\-list +mode. +If the operation is not possible without exceeding the +.IR limit , +.B xz +will display an error and decompressing the file will fail. +See +.BI \-\-memlimit\-compress= limit +for possible ways to specify the +.IR limit . +.TP +.BI \-\-memlimit\-mt\-decompress= limit +Set a memory usage limit for multi-threaded decompression. +This can only affect the number of threads; +this will never make +.B xz +refuse to decompress a file. +If +.I limit +is too low to allow any multi-threading, the +.I limit +is ignored and +.B xz +will continue in single-threaded mode. +Note that if also +.B \-\-memlimit\-decompress +is used, +it will always apply to both single-threaded and multi-threaded modes, +and so the effective +.I limit +for multi-threading will never be higher than the limit set with +.BR \-\-memlimit\-decompress . +.IP "" +In contrast to the other memory usage limit options, +.BI \-\-memlimit\-mt\-decompress= limit +has a system-specific default +.IR limit . +.B "xz \-\-info\-memory" +can be used to see the current value. +.IP "" +This option and its default value exist +because without any limit the threaded decompressor +could end up allocating an insane amount of memory with some input files. +If the default +.I limit +is too low on your system, +feel free to increase the +.I limit +but never set it to a value larger than the amount of usable RAM +as with appropriate input files +.B xz +will attempt to use that amount of memory +even with a low number of threads. +Running out of memory or swapping +will not improve decompression performance. +.IP "" +See +.BI \-\-memlimit\-compress= limit +for possible ways to specify the +.IR limit . +Setting +.I limit +to +.B 0 +resets the +.I limit +to the default system-specific value. +.IP "" +.TP +\fB\-M\fR \fIlimit\fR, \fB\-\-memlimit=\fIlimit\fR, \fB\-\-memory=\fIlimit +This is equivalent to specifying +.BI \-\-memlimit\-compress= limit +.BI \-\-memlimit-decompress= limit +\fB\-\-memlimit\-mt\-decompress=\fIlimit\fR. +.TP +.B \-\-no\-adjust +Display an error and exit if the memory usage limit cannot be +met without adjusting settings that affect the compressed output. +That is, this prevents +.B xz +from switching the encoder from multi-threaded mode to single-threaded mode +and from reducing the LZMA2 dictionary size. +Even when this option is used the number of threads may be reduced +to meet the memory usage limit as that won't affect the compressed output. +.IP "" +Automatic adjusting is always disabled when creating raw streams +.RB ( \-\-format=raw ). +.TP +\fB\-T\fR \fIthreads\fR, \fB\-\-threads=\fIthreads +Specify the number of worker threads to use. +Setting +.I threads +to a special value +.B 0 +makes +.B xz +use up to as many threads as the processor(s) on the system support. +The actual number of threads can be fewer than +.I threads +if the input file is not big enough +for threading with the given settings or +if using more threads would exceed the memory usage limit. +.IP "" +The single-threaded and multi-threaded compressors produce different output. +Single-threaded compressor will give the smallest file size but +only the output from the multi-threaded compressor can be decompressed +using multiple threads. +Setting +.I threads +to +.B 1 +will use the single-threaded mode. +Setting +.I threads +to any other value, including +.BR 0 , +will use the multi-threaded compressor +even if the system supports only one hardware thread. +.RB ( xz +5.2.x +used single-threaded mode in this situation.) +.IP "" +To use multi-threaded mode with only one thread, set +.I threads +to +.BR +1 . +The +.B + +prefix has no effect with values other than +.BR 1 . +A memory usage limit can still make +.B xz +switch to single-threaded mode unless +.B \-\-no\-adjust +is used. +Support for the +.B + +prefix was added in +.B xz +5.4.0. +.IP "" +If an automatic number of threads has been requested and +no memory usage limit has been specified, +then a system-specific default soft limit will be used to possibly +limit the number of threads. +It is a soft limit in sense that it is ignored +if the number of threads becomes one, +thus a soft limit will never stop +.B xz +from compressing or decompressing. +This default soft limit will not make +.B xz +switch from multi-threaded mode to single-threaded mode. +The active limits can be seen with +.BR "xz \-\-info\-memory" . +.IP "" +Currently the only threading method is to split the input into +blocks and compress them independently from each other. +The default block size depends on the compression level and +can be overridden with the +.BI \-\-block\-size= size +option. +.IP "" +Threaded decompression only works on files that contain +multiple blocks with size information in block headers. +All large enough files compressed in multi-threaded mode +meet this condition, +but files compressed in single-threaded mode don't even if +.BI \-\-block\-size= size +has been used. +. +.SS "Custom compressor filter chains" +A custom filter chain allows specifying +the compression settings in detail instead of relying on +the settings associated to the presets. +When a custom filter chain is specified, +preset options +.RB ( \-0 +\&...\& +.B \-9 +and +.BR \-\-extreme ) +earlier on the command line are forgotten. +If a preset option is specified +after one or more custom filter chain options, +the new preset takes effect and +the custom filter chain options specified earlier are forgotten. +.PP +A filter chain is comparable to piping on the command line. +When compressing, the uncompressed input goes to the first filter, +whose output goes to the next filter (if any). +The output of the last filter gets written to the compressed file. +The maximum number of filters in the chain is four, +but typically a filter chain has only one or two filters. +.PP +Many filters have limitations on where they can be +in the filter chain: +some filters can work only as the last filter in the chain, +some only as a non-last filter, and some work in any position +in the chain. +Depending on the filter, this limitation is either inherent to +the filter design or exists to prevent security issues. +.PP +A custom filter chain is specified by using one or more +filter options in the order they are wanted in the filter chain. +That is, the order of filter options is significant! +When decoding raw streams +.RB ( \-\-format=raw ), +the filter chain is specified in the same order as +it was specified when compressing. +.PP +Filters take filter-specific +.I options +as a comma-separated list. +Extra commas in +.I options +are ignored. +Every option has a default value, so you need to +specify only those you want to change. +.PP +To see the whole filter chain and +.IR options , +use +.B "xz \-vv" +(that is, use +.B \-\-verbose +twice). +This works also for viewing the filter chain options used by presets. +.TP +\fB\-\-lzma1\fR[\fB=\fIoptions\fR] +.PD 0 +.TP +\fB\-\-lzma2\fR[\fB=\fIoptions\fR] +.PD +Add LZMA1 or LZMA2 filter to the filter chain. +These filters can be used only as the last filter in the chain. +.IP "" +LZMA1 is a legacy filter, +which is supported almost solely due to the legacy +.B .lzma +file format, which supports only LZMA1. +LZMA2 is an updated +version of LZMA1 to fix some practical issues of LZMA1. +The +.B .xz +format uses LZMA2 and doesn't support LZMA1 at all. +Compression speed and ratios of LZMA1 and LZMA2 +are practically the same. +.IP "" +LZMA1 and LZMA2 share the same set of +.IR options : +.RS +.TP +.BI preset= preset +Reset all LZMA1 or LZMA2 +.I options +to +.IR preset . +.I Preset +consist of an integer, which may be followed by single-letter +preset modifiers. +The integer can be from +.B 0 +to +.BR 9 , +matching the command line options +.B \-0 +\&...\& +.BR \-9 . +The only supported modifier is currently +.BR e , +which matches +.BR \-\-extreme . +If no +.B preset +is specified, the default values of LZMA1 or LZMA2 +.I options +are taken from the preset +.BR 6 . +.TP +.BI dict= size +Dictionary (history buffer) +.I size +indicates how many bytes of the recently processed +uncompressed data is kept in memory. +The algorithm tries to find repeating byte sequences (matches) in +the uncompressed data, and replace them with references +to the data currently in the dictionary. +The bigger the dictionary, the higher is the chance +to find a match. +Thus, increasing dictionary +.I size +usually improves compression ratio, but +a dictionary bigger than the uncompressed file is waste of memory. +.IP "" +Typical dictionary +.I size +is from 64\ KiB to 64\ MiB. +The minimum is 4\ KiB. +The maximum for compression is currently 1.5\ GiB (1536\ MiB). +The decompressor already supports dictionaries up to +one byte less than 4\ GiB, which is the maximum for +the LZMA1 and LZMA2 stream formats. +.IP "" +Dictionary +.I size +and match finder +.RI ( mf ) +together determine the memory usage of the LZMA1 or LZMA2 encoder. +The same (or bigger) dictionary +.I size +is required for decompressing that was used when compressing, +thus the memory usage of the decoder is determined +by the dictionary size used when compressing. +The +.B .xz +headers store the dictionary +.I size +either as +.RI "2^" n +or +.RI "2^" n " + 2^(" n "\-1)," +so these +.I sizes +are somewhat preferred for compression. +Other +.I sizes +will get rounded up when stored in the +.B .xz +headers. +.TP +.BI lc= lc +Specify the number of literal context bits. +The minimum is 0 and the maximum is 4; the default is 3. +In addition, the sum of +.I lc +and +.I lp +must not exceed 4. +.IP "" +All bytes that cannot be encoded as matches +are encoded as literals. +That is, literals are simply 8-bit bytes +that are encoded one at a time. +.IP "" +The literal coding makes an assumption that the highest +.I lc +bits of the previous uncompressed byte correlate +with the next byte. +For example, in typical English text, an upper-case letter is +often followed by a lower-case letter, and a lower-case +letter is usually followed by another lower-case letter. +In the US-ASCII character set, the highest three bits are 010 +for upper-case letters and 011 for lower-case letters. +When +.I lc +is at least 3, the literal coding can take advantage of +this property in the uncompressed data. +.IP "" +The default value (3) is usually good. +If you want maximum compression, test +.BR lc=4 . +Sometimes it helps a little, and +sometimes it makes compression worse. +If it makes it worse, test +.B lc=2 +too. +.TP +.BI lp= lp +Specify the number of literal position bits. +The minimum is 0 and the maximum is 4; the default is 0. +.IP "" +.I Lp +affects what kind of alignment in the uncompressed data is +assumed when encoding literals. +See +.I pb +below for more information about alignment. +.TP +.BI pb= pb +Specify the number of position bits. +The minimum is 0 and the maximum is 4; the default is 2. +.IP "" +.I Pb +affects what kind of alignment in the uncompressed data is +assumed in general. +The default means four-byte alignment +.RI (2^ pb =2^2=4), +which is often a good choice when there's no better guess. +.IP "" +When the alignment is known, setting +.I pb +accordingly may reduce the file size a little. +For example, with text files having one-byte +alignment (US-ASCII, ISO-8859-*, UTF-8), setting +.B pb=0 +can improve compression slightly. +For UTF-16 text, +.B pb=1 +is a good choice. +If the alignment is an odd number like 3 bytes, +.B pb=0 +might be the best choice. +.IP "" +Even though the assumed alignment can be adjusted with +.I pb +and +.IR lp , +LZMA1 and LZMA2 still slightly favor 16-byte alignment. +It might be worth taking into account when designing file formats +that are likely to be often compressed with LZMA1 or LZMA2. +.TP +.BI mf= mf +Match finder has a major effect on encoder speed, +memory usage, and compression ratio. +Usually Hash Chain match finders are faster than Binary Tree +match finders. +The default depends on the +.IR preset : +0 uses +.BR hc3 , +1\(en3 +use +.BR hc4 , +and the rest use +.BR bt4 . +.IP "" +The following match finders are supported. +The memory usage formulas below are rough approximations, +which are closest to the reality when +.I dict +is a power of two. +.RS +.TP +.B hc3 +Hash Chain with 2- and 3-byte hashing +.br +Minimum value for +.IR nice : +3 +.br +Memory usage: +.br +.I dict +* 7.5 (if +.I dict +<= 16 MiB); +.br +.I dict +* 5.5 + 64 MiB (if +.I dict +> 16 MiB) +.TP +.B hc4 +Hash Chain with 2-, 3-, and 4-byte hashing +.br +Minimum value for +.IR nice : +4 +.br +Memory usage: +.br +.I dict +* 7.5 (if +.I dict +<= 32 MiB); +.br +.I dict +* 6.5 (if +.I dict +> 32 MiB) +.TP +.B bt2 +Binary Tree with 2-byte hashing +.br +Minimum value for +.IR nice : +2 +.br +Memory usage: +.I dict +* 9.5 +.TP +.B bt3 +Binary Tree with 2- and 3-byte hashing +.br +Minimum value for +.IR nice : +3 +.br +Memory usage: +.br +.I dict +* 11.5 (if +.I dict +<= 16 MiB); +.br +.I dict +* 9.5 + 64 MiB (if +.I dict +> 16 MiB) +.TP +.B bt4 +Binary Tree with 2-, 3-, and 4-byte hashing +.br +Minimum value for +.IR nice : +4 +.br +Memory usage: +.br +.I dict +* 11.5 (if +.I dict +<= 32 MiB); +.br +.I dict +* 10.5 (if +.I dict +> 32 MiB) +.RE +.TP +.BI mode= mode +Compression +.I mode +specifies the method to analyze +the data produced by the match finder. +Supported +.I modes +are +.B fast +and +.BR normal . +The default is +.B fast +for +.I presets +0\(en3 and +.B normal +for +.I presets +4\(en9. +.IP "" +Usually +.B fast +is used with Hash Chain match finders and +.B normal +with Binary Tree match finders. +This is also what the +.I presets +do. +.TP +.BI nice= nice +Specify what is considered to be a nice length for a match. +Once a match of at least +.I nice +bytes is found, the algorithm stops +looking for possibly better matches. +.IP "" +.I Nice +can be 2\(en273 bytes. +Higher values tend to give better compression ratio +at the expense of speed. +The default depends on the +.IR preset . +.TP +.BI depth= depth +Specify the maximum search depth in the match finder. +The default is the special value of 0, +which makes the compressor determine a reasonable +.I depth +from +.I mf +and +.IR nice . +.IP "" +Reasonable +.I depth +for Hash Chains is 4\(en100 and 16\(en1000 for Binary Trees. +Using very high values for +.I depth +can make the encoder extremely slow with some files. +Avoid setting the +.I depth +over 1000 unless you are prepared to interrupt +the compression in case it is taking far too long. +.RE +.IP "" +When decoding raw streams +.RB ( \-\-format=raw ), +LZMA2 needs only the dictionary +.IR size . +LZMA1 needs also +.IR lc , +.IR lp , +and +.IR pb . +.TP +\fB\-\-x86\fR[\fB=\fIoptions\fR] +.PD 0 +.TP +\fB\-\-arm\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-armthumb\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-arm64\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-powerpc\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-ia64\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-sparc\fR[\fB=\fIoptions\fR] +.PD +Add a branch/call/jump (BCJ) filter to the filter chain. +These filters can be used only as a non-last filter +in the filter chain. +.IP "" +A BCJ filter converts relative addresses in +the machine code to their absolute counterparts. +This doesn't change the size of the data +but it increases redundancy, +which can help LZMA2 to produce 0\(en15\ % smaller +.B .xz +file. +The BCJ filters are always reversible, +so using a BCJ filter for wrong type of data +doesn't cause any data loss, although it may make +the compression ratio slightly worse. +The BCJ filters are very fast and +use an insignificant amount of memory. +.IP "" +These BCJ filters have known problems related to +the compression ratio: +.RS +.IP \(bu 3 +Some types of files containing executable code +(for example, object files, static libraries, and Linux kernel modules) +have the addresses in the instructions filled with filler values. +These BCJ filters will still do the address conversion, +which will make the compression worse with these files. +.IP \(bu 3 +If a BCJ filter is applied on an archive, +it is possible that it makes the compression ratio +worse than not using a BCJ filter. +For example, if there are similar or even identical executables +then filtering will likely make the files less similar +and thus compression is worse. +The contents of non-executable files in the same archive can matter too. +In practice one has to try with and without a BCJ filter to see +which is better in each situation. +.RE +.IP "" +Different instruction sets have different alignment: +the executable file must be aligned to a multiple of +this value in the input data to make the filter work. +.RS +.RS +.PP +.TS +tab(;); +l n l +l n l. +Filter;Alignment;Notes +x86;1;32-bit or 64-bit x86 +ARM;4; +ARM-Thumb;2; +ARM64;4;4096-byte alignment is best +PowerPC;4;Big endian only +IA-64;16;Itanium +SPARC;4; +.TE +.RE +.RE +.IP "" +Since the BCJ-filtered data is usually compressed with LZMA2, +the compression ratio may be improved slightly if +the LZMA2 options are set to match the +alignment of the selected BCJ filter. +For example, with the IA-64 filter, it's good to set +.B pb=4 +or even +.B pb=4,lp=4,lc=0 +with LZMA2 (2^4=16). +The x86 filter is an exception; +it's usually good to stick to LZMA2's default +four-byte alignment when compressing x86 executables. +.IP "" +All BCJ filters support the same +.IR options : +.RS +.TP +.BI start= offset +Specify the start +.I offset +that is used when converting between relative +and absolute addresses. +The +.I offset +must be a multiple of the alignment of the filter +(see the table above). +The default is zero. +In practice, the default is good; specifying a custom +.I offset +is almost never useful. +.RE +.TP +\fB\-\-delta\fR[\fB=\fIoptions\fR] +Add the Delta filter to the filter chain. +The Delta filter can be only used as a non-last filter +in the filter chain. +.IP "" +Currently only simple byte-wise delta calculation is supported. +It can be useful when compressing, for example, uncompressed bitmap images +or uncompressed PCM audio. +However, special purpose algorithms may give significantly better +results than Delta + LZMA2. +This is true especially with audio, +which compresses faster and better, for example, with +.BR flac (1). +.IP "" +Supported +.IR options : +.RS +.TP +.BI dist= distance +Specify the +.I distance +of the delta calculation in bytes. +.I distance +must be 1\(en256. +The default is 1. +.IP "" +For example, with +.B dist=2 +and eight-byte input A1 B1 A2 B3 A3 B5 A4 B7, the output will be +A1 B1 01 02 01 02 01 02. +.RE +. +.SS "Other options" +.TP +.BR \-q ", " \-\-quiet +Suppress warnings and notices. +Specify this twice to suppress errors too. +This option has no effect on the exit status. +That is, even if a warning was suppressed, +the exit status to indicate a warning is still used. +.TP +.BR \-v ", " \-\-verbose +Be verbose. +If standard error is connected to a terminal, +.B xz +will display a progress indicator. +Specifying +.B \-\-verbose +twice will give even more verbose output. +.IP "" +The progress indicator shows the following information: +.RS +.IP \(bu 3 +Completion percentage is shown +if the size of the input file is known. +That is, the percentage cannot be shown in pipes. +.IP \(bu 3 +Amount of compressed data produced (compressing) +or consumed (decompressing). +.IP \(bu 3 +Amount of uncompressed data consumed (compressing) +or produced (decompressing). +.IP \(bu 3 +Compression ratio, which is calculated by dividing +the amount of compressed data processed so far by +the amount of uncompressed data processed so far. +.IP \(bu 3 +Compression or decompression speed. +This is measured as the amount of uncompressed data consumed +(compression) or produced (decompression) per second. +It is shown after a few seconds have passed since +.B xz +started processing the file. +.IP \(bu 3 +Elapsed time in the format M:SS or H:MM:SS. +.IP \(bu 3 +Estimated remaining time is shown +only when the size of the input file is +known and a couple of seconds have already passed since +.B xz +started processing the file. +The time is shown in a less precise format which +never has any colons, for example, 2 min 30 s. +.RE +.IP "" +When standard error is not a terminal, +.B \-\-verbose +will make +.B xz +print the filename, compressed size, uncompressed size, +compression ratio, and possibly also the speed and elapsed time +on a single line to standard error after compressing or +decompressing the file. +The speed and elapsed time are included only when +the operation took at least a few seconds. +If the operation didn't finish, for example, due to user interruption, +also the completion percentage is printed +if the size of the input file is known. +.TP +.BR \-Q ", " \-\-no\-warn +Don't set the exit status to 2 +even if a condition worth a warning was detected. +This option doesn't affect the verbosity level, thus both +.B \-\-quiet +and +.B \-\-no\-warn +have to be used to not display warnings and +to not alter the exit status. +.TP +.B \-\-robot +Print messages in a machine-parsable format. +This is intended to ease writing frontends that want to use +.B xz +instead of liblzma, which may be the case with various scripts. +The output with this option enabled is meant to be stable across +.B xz +releases. +See the section +.B "ROBOT MODE" +for details. +.TP +.B \-\-info\-memory +Display, in human-readable format, how much physical memory (RAM) +and how many processor threads +.B xz +thinks the system has and the memory usage limits for compression +and decompression, and exit successfully. +.TP +.BR \-h ", " \-\-help +Display a help message describing the most commonly used options, +and exit successfully. +.TP +.BR \-H ", " \-\-long\-help +Display a help message describing all features of +.BR xz , +and exit successfully +.TP +.BR \-V ", " \-\-version +Display the version number of +.B xz +and liblzma in human readable format. +To get machine-parsable output, specify +.B \-\-robot +before +.BR \-\-version . +. +.SH "ROBOT MODE" +The robot mode is activated with the +.B \-\-robot +option. +It makes the output of +.B xz +easier to parse by other programs. +Currently +.B \-\-robot +is supported only together with +.BR \-\-version , +.BR \-\-info\-memory , +and +.BR \-\-list . +It will be supported for compression and +decompression in the future. +. +.SS Version +.B "xz \-\-robot \-\-version" +will print the version number of +.B xz +and liblzma in the following format: +.PP +.BI XZ_VERSION= XYYYZZZS +.br +.BI LIBLZMA_VERSION= XYYYZZZS +.TP +.I X +Major version. +.TP +.I YYY +Minor version. +Even numbers are stable. +Odd numbers are alpha or beta versions. +.TP +.I ZZZ +Patch level for stable releases or +just a counter for development releases. +.TP +.I S +Stability. +0 is alpha, 1 is beta, and 2 is stable. +.I S +should be always 2 when +.I YYY +is even. +.PP +.I XYYYZZZS +are the same on both lines if +.B xz +and liblzma are from the same XZ Utils release. +.PP +Examples: 4.999.9beta is +.B 49990091 +and +5.0.0 is +.BR 50000002 . +. +.SS "Memory limit information" +.B "xz \-\-robot \-\-info\-memory" +prints a single line with three tab-separated columns: +.IP 1. 4 +Total amount of physical memory (RAM) in bytes. +.IP 2. 4 +Memory usage limit for compression in bytes +.RB ( \-\-memlimit\-compress ). +A special value of +.B 0 +indicates the default setting +which for single-threaded mode is the same as no limit. +.IP 3. 4 +Memory usage limit for decompression in bytes +.RB ( \-\-memlimit\-decompress ). +A special value of +.B 0 +indicates the default setting +which for single-threaded mode is the same as no limit. +.IP 4. 4 +Since +.B xz +5.3.4alpha: +Memory usage for multi-threaded decompression in bytes +.RB ( \-\-memlimit\-mt\-decompress ). +This is never zero because a system-specific default value +shown in the column 5 +is used if no limit has been specified explicitly. +This is also never greater than the value in the column 3 +even if a larger value has been specified with +.BR \-\-memlimit\-mt\-decompress . +.IP 5. 4 +Since +.B xz +5.3.4alpha: +A system-specific default memory usage limit +that is used to limit the number of threads +when compressing with an automatic number of threads +.RB ( \-\-threads=0 ) +and no memory usage limit has been specified +.RB ( \-\-memlimit\-compress ). +This is also used as the default value for +.BR \-\-memlimit\-mt\-decompress . +.IP 6. 4 +Since +.B xz +5.3.4alpha: +Number of available processor threads. +.PP +In the future, the output of +.B "xz \-\-robot \-\-info\-memory" +may have more columns, but never more than a single line. +. +.SS "List mode" +.B "xz \-\-robot \-\-list" +uses tab-separated output. +The first column of every line has a string +that indicates the type of the information found on that line: +.TP +.B name +This is always the first line when starting to list a file. +The second column on the line is the filename. +.TP +.B file +This line contains overall information about the +.B .xz +file. +This line is always printed after the +.B name +line. +.TP +.B stream +This line type is used only when +.B \-\-verbose +was specified. +There are as many +.B stream +lines as there are streams in the +.B .xz +file. +.TP +.B block +This line type is used only when +.B \-\-verbose +was specified. +There are as many +.B block +lines as there are blocks in the +.B .xz +file. +The +.B block +lines are shown after all the +.B stream +lines; different line types are not interleaved. +.TP +.B summary +This line type is used only when +.B \-\-verbose +was specified twice. +This line is printed after all +.B block +lines. +Like the +.B file +line, the +.B summary +line contains overall information about the +.B .xz +file. +.TP +.B totals +This line is always the very last line of the list output. +It shows the total counts and sizes. +.PP +The columns of the +.B file +lines: +.PD 0 +.RS +.IP 2. 4 +Number of streams in the file +.IP 3. 4 +Total number of blocks in the stream(s) +.IP 4. 4 +Compressed size of the file +.IP 5. 4 +Uncompressed size of the file +.IP 6. 4 +Compression ratio, for example, +.BR 0.123 . +If ratio is over 9.999, three dashes +.RB ( \-\-\- ) +are displayed instead of the ratio. +.IP 7. 4 +Comma-separated list of integrity check names. +The following strings are used for the known check types: +.BR None , +.BR CRC32 , +.BR CRC64 , +and +.BR SHA\-256 . +For unknown check types, +.BI Unknown\- N +is used, where +.I N +is the Check ID as a decimal number (one or two digits). +.IP 8. 4 +Total size of stream padding in the file +.RE +.PD +.PP +The columns of the +.B stream +lines: +.PD 0 +.RS +.IP 2. 4 +Stream number (the first stream is 1) +.IP 3. 4 +Number of blocks in the stream +.IP 4. 4 +Compressed start offset +.IP 5. 4 +Uncompressed start offset +.IP 6. 4 +Compressed size (does not include stream padding) +.IP 7. 4 +Uncompressed size +.IP 8. 4 +Compression ratio +.IP 9. 4 +Name of the integrity check +.IP 10. 4 +Size of stream padding +.RE +.PD +.PP +The columns of the +.B block +lines: +.PD 0 +.RS +.IP 2. 4 +Number of the stream containing this block +.IP 3. 4 +Block number relative to the beginning of the stream +(the first block is 1) +.IP 4. 4 +Block number relative to the beginning of the file +.IP 5. 4 +Compressed start offset relative to the beginning of the file +.IP 6. 4 +Uncompressed start offset relative to the beginning of the file +.IP 7. 4 +Total compressed size of the block (includes headers) +.IP 8. 4 +Uncompressed size +.IP 9. 4 +Compression ratio +.IP 10. 4 +Name of the integrity check +.RE +.PD +.PP +If +.B \-\-verbose +was specified twice, additional columns are included on the +.B block +lines. +These are not displayed with a single +.BR \-\-verbose , +because getting this information requires many seeks +and can thus be slow: +.PD 0 +.RS +.IP 11. 4 +Value of the integrity check in hexadecimal +.IP 12. 4 +Block header size +.IP 13. 4 +Block flags: +.B c +indicates that compressed size is present, and +.B u +indicates that uncompressed size is present. +If the flag is not set, a dash +.RB ( \- ) +is shown instead to keep the string length fixed. +New flags may be added to the end of the string in the future. +.IP 14. 4 +Size of the actual compressed data in the block (this excludes +the block header, block padding, and check fields) +.IP 15. 4 +Amount of memory (in bytes) required to decompress +this block with this +.B xz +version +.IP 16. 4 +Filter chain. +Note that most of the options used at compression time +cannot be known, because only the options +that are needed for decompression are stored in the +.B .xz +headers. +.RE +.PD +.PP +The columns of the +.B summary +lines: +.PD 0 +.RS +.IP 2. 4 +Amount of memory (in bytes) required to decompress +this file with this +.B xz +version +.IP 3. 4 +.B yes +or +.B no +indicating if all block headers have both compressed size and +uncompressed size stored in them +.PP +.I Since +.B xz +.I 5.1.2alpha: +.IP 4. 4 +Minimum +.B xz +version required to decompress the file +.RE +.PD +.PP +The columns of the +.B totals +line: +.PD 0 +.RS +.IP 2. 4 +Number of streams +.IP 3. 4 +Number of blocks +.IP 4. 4 +Compressed size +.IP 5. 4 +Uncompressed size +.IP 6. 4 +Average compression ratio +.IP 7. 4 +Comma-separated list of integrity check names +that were present in the files +.IP 8. 4 +Stream padding size +.IP 9. 4 +Number of files. +This is here to +keep the order of the earlier columns the same as on +.B file +lines. +.PD +.RE +.PP +If +.B \-\-verbose +was specified twice, additional columns are included on the +.B totals +line: +.PD 0 +.RS +.IP 10. 4 +Maximum amount of memory (in bytes) required to decompress +the files with this +.B xz +version +.IP 11. 4 +.B yes +or +.B no +indicating if all block headers have both compressed size and +uncompressed size stored in them +.PP +.I Since +.B xz +.I 5.1.2alpha: +.IP 12. 4 +Minimum +.B xz +version required to decompress the file +.RE +.PD +.PP +Future versions may add new line types and +new columns can be added to the existing line types, +but the existing columns won't be changed. +. +.SH "EXIT STATUS" +.TP +.B 0 +All is good. +.TP +.B 1 +An error occurred. +.TP +.B 2 +Something worth a warning occurred, +but no actual errors occurred. +.PP +Notices (not warnings or errors) printed on standard error +don't affect the exit status. +. +.SH ENVIRONMENT +.B xz +parses space-separated lists of options +from the environment variables +.B XZ_DEFAULTS +and +.BR XZ_OPT , +in this order, before parsing the options from the command line. +Note that only options are parsed from the environment variables; +all non-options are silently ignored. +Parsing is done with +.BR getopt_long (3) +which is used also for the command line arguments. +.TP +.B XZ_DEFAULTS +User-specific or system-wide default options. +Typically this is set in a shell initialization script to enable +.BR xz 's +memory usage limiter by default. +Excluding shell initialization scripts +and similar special cases, scripts must never set or unset +.BR XZ_DEFAULTS . +.TP +.B XZ_OPT +This is for passing options to +.B xz +when it is not possible to set the options directly on the +.B xz +command line. +This is the case when +.B xz +is run by a script or tool, for example, GNU +.BR tar (1): +.RS +.RS +.PP +.nf +.ft CW +XZ_OPT=\-2v tar caf foo.tar.xz foo +.ft R +.fi +.RE +.RE +.IP "" +Scripts may use +.BR XZ_OPT , +for example, to set script-specific default compression options. +It is still recommended to allow users to override +.B XZ_OPT +if that is reasonable. +For example, in +.BR sh (1) +scripts one may use something like this: +.RS +.RS +.PP +.nf +.ft CW +XZ_OPT=${XZ_OPT\-"\-7e"} +export XZ_OPT +.ft R +.fi +.RE +.RE +. +.SH "LZMA UTILS COMPATIBILITY" +The command line syntax of +.B xz +is practically a superset of +.BR lzma , +.BR unlzma , +and +.B lzcat +as found from LZMA Utils 4.32.x. +In most cases, it is possible to replace +LZMA Utils with XZ Utils without breaking existing scripts. +There are some incompatibilities though, +which may sometimes cause problems. +. +.SS "Compression preset levels" +The numbering of the compression level presets is not identical in +.B xz +and LZMA Utils. +The most important difference is how dictionary sizes +are mapped to different presets. +Dictionary size is roughly equal to the decompressor memory usage. +.RS +.PP +.TS +tab(;); +c c c +c n n. +Level;xz;LZMA Utils +\-0;256 KiB;N/A +\-1;1 MiB;64 KiB +\-2;2 MiB;1 MiB +\-3;4 MiB;512 KiB +\-4;4 MiB;1 MiB +\-5;8 MiB;2 MiB +\-6;8 MiB;4 MiB +\-7;16 MiB;8 MiB +\-8;32 MiB;16 MiB +\-9;64 MiB;32 MiB +.TE +.RE +.PP +The dictionary size differences affect +the compressor memory usage too, +but there are some other differences between +LZMA Utils and XZ Utils, which +make the difference even bigger: +.RS +.PP +.TS +tab(;); +c c c +c n n. +Level;xz;LZMA Utils 4.32.x +\-0;3 MiB;N/A +\-1;9 MiB;2 MiB +\-2;17 MiB;12 MiB +\-3;32 MiB;12 MiB +\-4;48 MiB;16 MiB +\-5;94 MiB;26 MiB +\-6;94 MiB;45 MiB +\-7;186 MiB;83 MiB +\-8;370 MiB;159 MiB +\-9;674 MiB;311 MiB +.TE +.RE +.PP +The default preset level in LZMA Utils is +.B \-7 +while in XZ Utils it is +.BR \-6 , +so both use an 8 MiB dictionary by default. +. +.SS "Streamed vs. non-streamed .lzma files" +The uncompressed size of the file can be stored in the +.B .lzma +header. +LZMA Utils does that when compressing regular files. +The alternative is to mark that uncompressed size is unknown +and use end-of-payload marker to indicate +where the decompressor should stop. +LZMA Utils uses this method when uncompressed size isn't known, +which is the case, for example, in pipes. +.PP +.B xz +supports decompressing +.B .lzma +files with or without end-of-payload marker, but all +.B .lzma +files created by +.B xz +will use end-of-payload marker and have uncompressed size +marked as unknown in the +.B .lzma +header. +This may be a problem in some uncommon situations. +For example, a +.B .lzma +decompressor in an embedded device might work +only with files that have known uncompressed size. +If you hit this problem, you need to use LZMA Utils +or LZMA SDK to create +.B .lzma +files with known uncompressed size. +. +.SS "Unsupported .lzma files" +The +.B .lzma +format allows +.I lc +values up to 8, and +.I lp +values up to 4. +LZMA Utils can decompress files with any +.I lc +and +.IR lp , +but always creates files with +.B lc=3 +and +.BR lp=0 . +Creating files with other +.I lc +and +.I lp +is possible with +.B xz +and with LZMA SDK. +.PP +The implementation of the LZMA1 filter in liblzma +requires that the sum of +.I lc +and +.I lp +must not exceed 4. +Thus, +.B .lzma +files, which exceed this limitation, cannot be decompressed with +.BR xz . +.PP +LZMA Utils creates only +.B .lzma +files which have a dictionary size of +.RI "2^" n +(a power of 2) but accepts files with any dictionary size. +liblzma accepts only +.B .lzma +files which have a dictionary size of +.RI "2^" n +or +.RI "2^" n " + 2^(" n "\-1)." +This is to decrease false positives when detecting +.B .lzma +files. +.PP +These limitations shouldn't be a problem in practice, +since practically all +.B .lzma +files have been compressed with settings that liblzma will accept. +. +.SS "Trailing garbage" +When decompressing, +LZMA Utils silently ignore everything after the first +.B .lzma +stream. +In most situations, this is a bug. +This also means that LZMA Utils +don't support decompressing concatenated +.B .lzma +files. +.PP +If there is data left after the first +.B .lzma +stream, +.B xz +considers the file to be corrupt unless +.B \-\-single\-stream +was used. +This may break obscure scripts which have +assumed that trailing garbage is ignored. +. +.SH NOTES +. +.SS "Compressed output may vary" +The exact compressed output produced from +the same uncompressed input file +may vary between XZ Utils versions even if +compression options are identical. +This is because the encoder can be improved +(faster or better compression) +without affecting the file format. +The output can vary even between different +builds of the same XZ Utils version, +if different build options are used. +.PP +The above means that once +.B \-\-rsyncable +has been implemented, +the resulting files won't necessarily be rsyncable +unless both old and new files have been compressed +with the same xz version. +This problem can be fixed if a part of the encoder +implementation is frozen to keep rsyncable output +stable across xz versions. +. +.SS "Embedded .xz decompressors" +Embedded +.B .xz +decompressor implementations like XZ Embedded don't necessarily +support files created with integrity +.I check +types other than +.B none +and +.BR crc32 . +Since the default is +.BR \-\-check=crc64 , +you must use +.B \-\-check=none +or +.B \-\-check=crc32 +when creating files for embedded systems. +.PP +Outside embedded systems, all +.B .xz +format decompressors support all the +.I check +types, or at least are able to decompress +the file without verifying the +integrity check if the particular +.I check +is not supported. +.PP +XZ Embedded supports BCJ filters, +but only with the default start offset. +. +.SH EXAMPLES +. +.SS Basics +Compress the file +.I foo +into +.I foo.xz +using the default compression level +.RB ( \-6 ), +and remove +.I foo +if compression is successful: +.RS +.PP +.nf +.ft CW +xz foo +.ft R +.fi +.RE +.PP +Decompress +.I bar.xz +into +.I bar +and don't remove +.I bar.xz +even if decompression is successful: +.RS +.PP +.nf +.ft CW +xz \-dk bar.xz +.ft R +.fi +.RE +.PP +Create +.I baz.tar.xz +with the preset +.B \-4e +.RB ( "\-4 \-\-extreme" ), +which is slower than the default +.BR \-6 , +but needs less memory for compression and decompression (48\ MiB +and 5\ MiB, respectively): +.RS +.PP +.nf +.ft CW +tar cf \- baz | xz \-4e > baz.tar.xz +.ft R +.fi +.RE +.PP +A mix of compressed and uncompressed files can be decompressed +to standard output with a single command: +.RS +.PP +.nf +.ft CW +xz \-dcf a.txt b.txt.xz c.txt d.txt.lzma > abcd.txt +.ft R +.fi +.RE +. +.SS "Parallel compression of many files" +On GNU and *BSD, +.BR find (1) +and +.BR xargs (1) +can be used to parallelize compression of many files: +.RS +.PP +.nf +.ft CW +find . \-type f \e! \-name '*.xz' \-print0 \e + | xargs \-0r \-P4 \-n16 xz \-T1 +.ft R +.fi +.RE +.PP +The +.B \-P +option to +.BR xargs (1) +sets the number of parallel +.B xz +processes. +The best value for the +.B \-n +option depends on how many files there are to be compressed. +If there are only a couple of files, +the value should probably be 1; +with tens of thousands of files, +100 or even more may be appropriate to reduce the number of +.B xz +processes that +.BR xargs (1) +will eventually create. +.PP +The option +.B \-T1 +for +.B xz +is there to force it to single-threaded mode, because +.BR xargs (1) +is used to control the amount of parallelization. +. +.SS "Robot mode" +Calculate how many bytes have been saved in total +after compressing multiple files: +.RS +.PP +.nf +.ft CW +xz \-\-robot \-\-list *.xz | awk '/^totals/{print $5\-$4}' +.ft R +.fi +.RE +.PP +A script may want to know that it is using new enough +.BR xz . +The following +.BR sh (1) +script checks that the version number of the +.B xz +tool is at least 5.0.0. +This method is compatible with old beta versions, +which didn't support the +.B \-\-robot +option: +.RS +.PP +.nf +.ft CW +if ! eval "$(xz \-\-robot \-\-version 2> /dev/null)" || + [ "$XZ_VERSION" \-lt 50000002 ]; then + echo "Your xz is too old." +fi +unset XZ_VERSION LIBLZMA_VERSION +.ft R +.fi +.RE +.PP +Set a memory usage limit for decompression using +.BR XZ_OPT , +but if a limit has already been set, don't increase it: +.RS +.PP +.nf +.ft CW +NEWLIM=$((123 << 20))\ \ # 123 MiB +OLDLIM=$(xz \-\-robot \-\-info\-memory | cut \-f3) +if [ $OLDLIM \-eq 0 \-o $OLDLIM \-gt $NEWLIM ]; then + XZ_OPT="$XZ_OPT \-\-memlimit\-decompress=$NEWLIM" + export XZ_OPT +fi +.ft R +.fi +.RE +. +.SS "Custom compressor filter chains" +The simplest use for custom filter chains is +customizing a LZMA2 preset. +This can be useful, +because the presets cover only a subset of the +potentially useful combinations of compression settings. +.PP +The CompCPU columns of the tables +from the descriptions of the options +.BR "\-0" " ... " "\-9" +and +.B \-\-extreme +are useful when customizing LZMA2 presets. +Here are the relevant parts collected from those two tables: +.RS +.PP +.TS +tab(;); +c c +n n. +Preset;CompCPU +\-0;0 +\-1;1 +\-2;2 +\-3;3 +\-4;4 +\-5;5 +\-6;6 +\-5e;7 +\-6e;8 +.TE +.RE +.PP +If you know that a file requires +somewhat big dictionary (for example, 32\ MiB) to compress well, +but you want to compress it quicker than +.B "xz \-8" +would do, a preset with a low CompCPU value (for example, 1) +can be modified to use a bigger dictionary: +.RS +.PP +.nf +.ft CW +xz \-\-lzma2=preset=1,dict=32MiB foo.tar +.ft R +.fi +.RE +.PP +With certain files, the above command may be faster than +.B "xz \-6" +while compressing significantly better. +However, it must be emphasized that only some files benefit from +a big dictionary while keeping the CompCPU value low. +The most obvious situation, +where a big dictionary can help a lot, +is an archive containing very similar files +of at least a few megabytes each. +The dictionary size has to be significantly bigger +than any individual file to allow LZMA2 to take +full advantage of the similarities between consecutive files. +.PP +If very high compressor and decompressor memory usage is fine, +and the file being compressed is +at least several hundred megabytes, it may be useful +to use an even bigger dictionary than the 64 MiB that +.B "xz \-9" +would use: +.RS +.PP +.nf +.ft CW +xz \-vv \-\-lzma2=dict=192MiB big_foo.tar +.ft R +.fi +.RE +.PP +Using +.B \-vv +.RB ( "\-\-verbose \-\-verbose" ) +like in the above example can be useful +to see the memory requirements +of the compressor and decompressor. +Remember that using a dictionary bigger than +the size of the uncompressed file is waste of memory, +so the above command isn't useful for small files. +.PP +Sometimes the compression time doesn't matter, +but the decompressor memory usage has to be kept low, for example, +to make it possible to decompress the file on an embedded system. +The following command uses +.B \-6e +.RB ( "\-6 \-\-extreme" ) +as a base and sets the dictionary to only 64\ KiB. +The resulting file can be decompressed with XZ Embedded +(that's why there is +.BR \-\-check=crc32 ) +using about 100\ KiB of memory. +.RS +.PP +.nf +.ft CW +xz \-\-check=crc32 \-\-lzma2=preset=6e,dict=64KiB foo +.ft R +.fi +.RE +.PP +If you want to squeeze out as many bytes as possible, +adjusting the number of literal context bits +.RI ( lc ) +and number of position bits +.RI ( pb ) +can sometimes help. +Adjusting the number of literal position bits +.RI ( lp ) +might help too, but usually +.I lc +and +.I pb +are more important. +For example, a source code archive contains mostly US-ASCII text, +so something like the following might give +slightly (like 0.1\ %) smaller file than +.B "xz \-6e" +(try also without +.BR lc=4 ): +.RS +.PP +.nf +.ft CW +xz \-\-lzma2=preset=6e,pb=0,lc=4 source_code.tar +.ft R +.fi +.RE +.PP +Using another filter together with LZMA2 can improve +compression with certain file types. +For example, to compress a x86-32 or x86-64 shared library +using the x86 BCJ filter: +.RS +.PP +.nf +.ft CW +xz \-\-x86 \-\-lzma2 libfoo.so +.ft R +.fi +.RE +.PP +Note that the order of the filter options is significant. +If +.B \-\-x86 +is specified after +.BR \-\-lzma2 , +.B xz +will give an error, +because there cannot be any filter after LZMA2, +and also because the x86 BCJ filter cannot be used +as the last filter in the chain. +.PP +The Delta filter together with LZMA2 +can give good results with bitmap images. +It should usually beat PNG, +which has a few more advanced filters than simple +delta but uses Deflate for the actual compression. +.PP +The image has to be saved in uncompressed format, +for example, as uncompressed TIFF. +The distance parameter of the Delta filter is set +to match the number of bytes per pixel in the image. +For example, 24-bit RGB bitmap needs +.BR dist=3 , +and it is also good to pass +.B pb=0 +to LZMA2 to accommodate the three-byte alignment: +.RS +.PP +.nf +.ft CW +xz \-\-delta=dist=3 \-\-lzma2=pb=0 foo.tiff +.ft R +.fi +.RE +.PP +If multiple images have been put into a single archive (for example, +.BR .tar ), +the Delta filter will work on that too as long as all images +have the same number of bytes per pixel. +. +.SH "SEE ALSO" +.BR xzdec (1), +.BR xzdiff (1), +.BR xzgrep (1), +.BR xzless (1), +.BR xzmore (1), +.BR gzip (1), +.BR bzip2 (1), +.BR 7z (1) +.PP +XZ Utils: +.br +XZ Embedded: +.br +LZMA SDK: -- cgit v1.2.3