From eac54b7c4aec25060d7bd856f7cdc290943d6aae Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 23:12:04 +0200 Subject: Adding upstream version 5.4.1. Signed-off-by: Daniel Baumann --- src/Makefile.am | 42 + src/Makefile.in | 696 ++++++ src/common/common_w32res.rc | 52 + src/common/mythread.h | 528 +++++ src/common/sysdefs.h | 189 ++ src/common/tuklib_common.h | 71 + src/common/tuklib_config.h | 10 + src/common/tuklib_cpucores.c | 109 + src/common/tuklib_cpucores.h | 23 + src/common/tuklib_exit.c | 58 + src/common/tuklib_exit.h | 25 + src/common/tuklib_gettext.h | 44 + src/common/tuklib_integer.h | 784 ++++++ src/common/tuklib_mbstr.h | 66 + src/common/tuklib_mbstr_fw.c | 31 + src/common/tuklib_mbstr_width.c | 65 + src/common/tuklib_open_stdxxx.c | 57 + src/common/tuklib_open_stdxxx.h | 23 + src/common/tuklib_physmem.c | 216 ++ src/common/tuklib_physmem.h | 28 + src/common/tuklib_progname.c | 50 + src/common/tuklib_progname.h | 32 + src/liblzma/Makefile.am | 126 + src/liblzma/Makefile.in | 2230 +++++++++++++++++ src/liblzma/api/Makefile.am | 23 + src/liblzma/api/Makefile.in | 630 +++++ src/liblzma/api/lzma.h | 327 +++ src/liblzma/api/lzma/base.h | 712 ++++++ src/liblzma/api/lzma/bcj.h | 94 + src/liblzma/api/lzma/block.h | 578 +++++ src/liblzma/api/lzma/check.h | 150 ++ src/liblzma/api/lzma/container.h | 904 +++++++ src/liblzma/api/lzma/delta.h | 77 + src/liblzma/api/lzma/filter.h | 714 ++++++ src/liblzma/api/lzma/hardware.h | 64 + src/liblzma/api/lzma/index.h | 752 ++++++ src/liblzma/api/lzma/index_hash.h | 107 + src/liblzma/api/lzma/lzma12.h | 529 +++++ src/liblzma/api/lzma/stream_flags.h | 223 ++ src/liblzma/api/lzma/version.h | 121 + src/liblzma/api/lzma/vli.h | 168 ++ src/liblzma/check/Makefile.inc | 53 + src/liblzma/check/check.c | 174 ++ src/liblzma/check/check.h | 172 ++ src/liblzma/check/crc32_fast.c | 82 + src/liblzma/check/crc32_small.c | 68 + src/liblzma/check/crc32_table.c | 22 + src/liblzma/check/crc32_table_be.h | 525 ++++ src/liblzma/check/crc32_table_le.h | 525 ++++ src/liblzma/check/crc32_tablegen.c | 117 + src/liblzma/check/crc32_x86.S | 313 +++ src/liblzma/check/crc64_fast.c | 530 +++++ src/liblzma/check/crc64_small.c | 58 + src/liblzma/check/crc64_table.c | 35 + src/liblzma/check/crc64_table_be.h | 521 ++++ src/liblzma/check/crc64_table_le.h | 521 ++++ src/liblzma/check/crc64_tablegen.c | 88 + src/liblzma/check/crc64_x86.S | 296 +++ src/liblzma/check/crc_macros.h | 30 + src/liblzma/check/sha256.c | 196 ++ src/liblzma/common/Makefile.inc | 104 + src/liblzma/common/alone_decoder.c | 249 ++ src/liblzma/common/alone_decoder.h | 23 + src/liblzma/common/alone_encoder.c | 163 ++ src/liblzma/common/auto_decoder.c | 206 ++ src/liblzma/common/block_buffer_decoder.c | 80 + src/liblzma/common/block_buffer_encoder.c | 355 +++ src/liblzma/common/block_buffer_encoder.h | 24 + src/liblzma/common/block_decoder.c | 286 +++ src/liblzma/common/block_decoder.h | 22 + src/liblzma/common/block_encoder.c | 224 ++ src/liblzma/common/block_encoder.h | 47 + src/liblzma/common/block_header_decoder.c | 115 + src/liblzma/common/block_header_encoder.c | 132 ++ src/liblzma/common/block_util.c | 90 + src/liblzma/common/common.c | 471 ++++ src/liblzma/common/common.h | 385 +++ src/liblzma/common/easy_buffer_encoder.c | 27 + src/liblzma/common/easy_decoder_memusage.c | 24 + src/liblzma/common/easy_encoder.c | 24 + src/liblzma/common/easy_encoder_memusage.c | 24 + src/liblzma/common/easy_preset.c | 27 + src/liblzma/common/easy_preset.h | 32 + src/liblzma/common/file_info.c | 855 +++++++ src/liblzma/common/filter_buffer_decoder.c | 88 + src/liblzma/common/filter_buffer_encoder.c | 55 + src/liblzma/common/filter_common.c | 385 +++ src/liblzma/common/filter_common.h | 51 + src/liblzma/common/filter_decoder.c | 198 ++ src/liblzma/common/filter_decoder.h | 23 + src/liblzma/common/filter_encoder.c | 308 +++ src/liblzma/common/filter_encoder.h | 27 + src/liblzma/common/filter_flags_decoder.c | 46 + src/liblzma/common/filter_flags_encoder.c | 56 + src/liblzma/common/hardware_cputhreads.c | 34 + src/liblzma/common/hardware_physmem.c | 25 + src/liblzma/common/index.c | 1263 ++++++++++ src/liblzma/common/index.h | 81 + src/liblzma/common/index_decoder.c | 355 +++ src/liblzma/common/index_decoder.h | 25 + src/liblzma/common/index_encoder.c | 256 ++ src/liblzma/common/index_encoder.h | 23 + src/liblzma/common/index_hash.c | 336 +++ src/liblzma/common/lzip_decoder.c | 414 ++++ src/liblzma/common/lzip_decoder.h | 22 + src/liblzma/common/memcmplen.h | 160 ++ src/liblzma/common/microlzma_decoder.c | 221 ++ src/liblzma/common/microlzma_encoder.c | 141 ++ src/liblzma/common/outqueue.c | 287 +++ src/liblzma/common/outqueue.h | 254 ++ src/liblzma/common/stream_buffer_decoder.c | 91 + src/liblzma/common/stream_buffer_encoder.c | 142 ++ src/liblzma/common/stream_decoder.c | 474 ++++ src/liblzma/common/stream_decoder.h | 22 + src/liblzma/common/stream_decoder_mt.c | 2016 ++++++++++++++++ src/liblzma/common/stream_encoder.c | 355 +++ src/liblzma/common/stream_encoder_mt.c | 1283 ++++++++++ src/liblzma/common/stream_flags_common.c | 47 + src/liblzma/common/stream_flags_common.h | 33 + src/liblzma/common/stream_flags_decoder.c | 88 + src/liblzma/common/stream_flags_encoder.c | 86 + src/liblzma/common/string_conversion.c | 1317 +++++++++++ src/liblzma/common/vli_decoder.c | 86 + src/liblzma/common/vli_encoder.c | 69 + src/liblzma/common/vli_size.c | 30 + src/liblzma/delta/Makefile.inc | 23 + src/liblzma/delta/delta_common.c | 73 + src/liblzma/delta/delta_common.h | 20 + src/liblzma/delta/delta_decoder.c | 78 + src/liblzma/delta/delta_decoder.h | 26 + src/liblzma/delta/delta_encoder.c | 125 + src/liblzma/delta/delta_encoder.h | 24 + src/liblzma/delta/delta_private.h | 37 + src/liblzma/liblzma.pc.in | 19 + src/liblzma/liblzma_generic.map | 121 + src/liblzma/liblzma_linux.map | 136 ++ src/liblzma/liblzma_w32res.rc | 12 + src/liblzma/lz/Makefile.inc | 22 + src/liblzma/lz/lz_decoder.c | 304 +++ src/liblzma/lz/lz_decoder.h | 234 ++ src/liblzma/lz/lz_encoder.c | 633 +++++ src/liblzma/lz/lz_encoder.h | 341 +++ src/liblzma/lz/lz_encoder_hash.h | 108 + src/liblzma/lz/lz_encoder_hash_table.h | 68 + src/liblzma/lz/lz_encoder_mf.c | 744 ++++++ src/liblzma/lzma/Makefile.inc | 47 + src/liblzma/lzma/fastpos.h | 141 ++ src/liblzma/lzma/fastpos_table.c | 519 ++++ src/liblzma/lzma/fastpos_tablegen.c | 55 + src/liblzma/lzma/lzma2_decoder.c | 311 +++ src/liblzma/lzma/lzma2_decoder.h | 29 + src/liblzma/lzma/lzma2_encoder.c | 414 ++++ src/liblzma/lzma/lzma2_encoder.h | 43 + src/liblzma/lzma/lzma_common.h | 225 ++ src/liblzma/lzma/lzma_decoder.c | 1133 +++++++++ src/liblzma/lzma/lzma_decoder.h | 53 + src/liblzma/lzma/lzma_encoder.c | 784 ++++++ src/liblzma/lzma/lzma_encoder.h | 59 + src/liblzma/lzma/lzma_encoder_optimum_fast.c | 170 ++ src/liblzma/lzma/lzma_encoder_optimum_normal.c | 859 +++++++ src/liblzma/lzma/lzma_encoder_presets.c | 64 + src/liblzma/lzma/lzma_encoder_private.h | 162 ++ src/liblzma/rangecoder/Makefile.inc | 21 + src/liblzma/rangecoder/price.h | 92 + src/liblzma/rangecoder/price_table.c | 22 + src/liblzma/rangecoder/price_tablegen.c | 87 + src/liblzma/rangecoder/range_common.h | 71 + src/liblzma/rangecoder/range_decoder.h | 185 ++ src/liblzma/rangecoder/range_encoder.h | 350 +++ src/liblzma/simple/Makefile.inc | 51 + src/liblzma/simple/arm.c | 75 + src/liblzma/simple/arm64.c | 137 ++ src/liblzma/simple/armthumb.c | 80 + src/liblzma/simple/ia64.c | 116 + src/liblzma/simple/powerpc.c | 80 + src/liblzma/simple/simple_coder.c | 290 +++ src/liblzma/simple/simple_coder.h | 81 + src/liblzma/simple/simple_decoder.c | 40 + src/liblzma/simple/simple_decoder.h | 22 + src/liblzma/simple/simple_encoder.c | 38 + src/liblzma/simple/simple_encoder.h | 23 + src/liblzma/simple/simple_private.h | 74 + src/liblzma/simple/sparc.c | 87 + src/liblzma/simple/x86.c | 163 ++ src/liblzma/validate_map.sh | 165 ++ src/lzmainfo/Makefile.am | 39 + src/lzmainfo/Makefile.in | 837 +++++++ src/lzmainfo/lzmainfo.1 | 60 + src/lzmainfo/lzmainfo.c | 219 ++ src/lzmainfo/lzmainfo_w32res.rc | 12 + src/scripts/Makefile.am | 89 + src/scripts/Makefile.in | 700 ++++++ src/scripts/xzdiff.1 | 79 + src/scripts/xzdiff.in | 215 ++ src/scripts/xzgrep.1 | 113 + src/scripts/xzgrep.in | 298 +++ src/scripts/xzless.1 | 69 + src/scripts/xzless.in | 59 + src/scripts/xzmore.1 | 55 + src/scripts/xzmore.in | 79 + src/xz/Makefile.am | 133 ++ src/xz/Makefile.in | 1162 +++++++++ src/xz/args.c | 751 ++++++ src/xz/args.h | 44 + src/xz/coder.c | 1108 +++++++++ src/xz/coder.h | 78 + src/xz/file_io.c | 1366 +++++++++++ src/xz/file_io.h | 179 ++ src/xz/hardware.c | 338 +++ src/xz/hardware.h | 74 + src/xz/list.c | 1317 +++++++++++ src/xz/list.h | 18 + src/xz/main.c | 344 +++ src/xz/main.h | 30 + src/xz/message.c | 1146 +++++++++ src/xz/message.h | 152 ++ src/xz/mytime.c | 86 + src/xz/mytime.h | 43 + src/xz/options.c | 358 +++ src/xz/options.h | 31 + src/xz/private.h | 66 + src/xz/signals.c | 209 ++ src/xz/signals.h | 43 + src/xz/suffix.c | 411 ++++ src/xz/suffix.h | 28 + src/xz/util.c | 286 +++ src/xz/util.h | 119 + src/xz/xz.1 | 3020 ++++++++++++++++++++++++ src/xz/xz_w32res.rc | 12 + src/xzdec/Makefile.am | 111 + src/xzdec/Makefile.in | 969 ++++++++ src/xzdec/lzmadec_w32res.rc | 12 + src/xzdec/xzdec.1 | 146 ++ src/xzdec/xzdec.c | 323 +++ src/xzdec/xzdec_w32res.rc | 12 + 235 files changed, 59330 insertions(+) create mode 100644 src/Makefile.am create mode 100644 src/Makefile.in create mode 100644 src/common/common_w32res.rc create mode 100644 src/common/mythread.h create mode 100644 src/common/sysdefs.h create mode 100644 src/common/tuklib_common.h create mode 100644 src/common/tuklib_config.h create mode 100644 src/common/tuklib_cpucores.c create mode 100644 src/common/tuklib_cpucores.h create mode 100644 src/common/tuklib_exit.c create mode 100644 src/common/tuklib_exit.h create mode 100644 src/common/tuklib_gettext.h create mode 100644 src/common/tuklib_integer.h create mode 100644 src/common/tuklib_mbstr.h create mode 100644 src/common/tuklib_mbstr_fw.c create mode 100644 src/common/tuklib_mbstr_width.c create mode 100644 src/common/tuklib_open_stdxxx.c create mode 100644 src/common/tuklib_open_stdxxx.h create mode 100644 src/common/tuklib_physmem.c create mode 100644 src/common/tuklib_physmem.h create mode 100644 src/common/tuklib_progname.c create mode 100644 src/common/tuklib_progname.h create mode 100644 src/liblzma/Makefile.am create mode 100644 src/liblzma/Makefile.in create mode 100644 src/liblzma/api/Makefile.am create mode 100644 src/liblzma/api/Makefile.in create mode 100644 src/liblzma/api/lzma.h create mode 100644 src/liblzma/api/lzma/base.h create mode 100644 src/liblzma/api/lzma/bcj.h create mode 100644 src/liblzma/api/lzma/block.h create mode 100644 src/liblzma/api/lzma/check.h create mode 100644 src/liblzma/api/lzma/container.h create mode 100644 src/liblzma/api/lzma/delta.h create mode 100644 src/liblzma/api/lzma/filter.h create mode 100644 src/liblzma/api/lzma/hardware.h create mode 100644 src/liblzma/api/lzma/index.h create mode 100644 src/liblzma/api/lzma/index_hash.h create mode 100644 src/liblzma/api/lzma/lzma12.h create mode 100644 src/liblzma/api/lzma/stream_flags.h create mode 100644 src/liblzma/api/lzma/version.h create mode 100644 src/liblzma/api/lzma/vli.h create mode 100644 src/liblzma/check/Makefile.inc create mode 100644 src/liblzma/check/check.c create mode 100644 src/liblzma/check/check.h create mode 100644 src/liblzma/check/crc32_fast.c create mode 100644 src/liblzma/check/crc32_small.c create mode 100644 src/liblzma/check/crc32_table.c create mode 100644 src/liblzma/check/crc32_table_be.h create mode 100644 src/liblzma/check/crc32_table_le.h create mode 100644 src/liblzma/check/crc32_tablegen.c create mode 100644 src/liblzma/check/crc32_x86.S create mode 100644 src/liblzma/check/crc64_fast.c create mode 100644 src/liblzma/check/crc64_small.c create mode 100644 src/liblzma/check/crc64_table.c create mode 100644 src/liblzma/check/crc64_table_be.h create mode 100644 src/liblzma/check/crc64_table_le.h create mode 100644 src/liblzma/check/crc64_tablegen.c create mode 100644 src/liblzma/check/crc64_x86.S create mode 100644 src/liblzma/check/crc_macros.h create mode 100644 src/liblzma/check/sha256.c create mode 100644 src/liblzma/common/Makefile.inc create mode 100644 src/liblzma/common/alone_decoder.c create mode 100644 src/liblzma/common/alone_decoder.h create mode 100644 src/liblzma/common/alone_encoder.c create mode 100644 src/liblzma/common/auto_decoder.c create mode 100644 src/liblzma/common/block_buffer_decoder.c create mode 100644 src/liblzma/common/block_buffer_encoder.c create mode 100644 src/liblzma/common/block_buffer_encoder.h create mode 100644 src/liblzma/common/block_decoder.c create mode 100644 src/liblzma/common/block_decoder.h create mode 100644 src/liblzma/common/block_encoder.c create mode 100644 src/liblzma/common/block_encoder.h create mode 100644 src/liblzma/common/block_header_decoder.c create mode 100644 src/liblzma/common/block_header_encoder.c create mode 100644 src/liblzma/common/block_util.c create mode 100644 src/liblzma/common/common.c create mode 100644 src/liblzma/common/common.h create mode 100644 src/liblzma/common/easy_buffer_encoder.c create mode 100644 src/liblzma/common/easy_decoder_memusage.c create mode 100644 src/liblzma/common/easy_encoder.c create mode 100644 src/liblzma/common/easy_encoder_memusage.c create mode 100644 src/liblzma/common/easy_preset.c create mode 100644 src/liblzma/common/easy_preset.h create mode 100644 src/liblzma/common/file_info.c create mode 100644 src/liblzma/common/filter_buffer_decoder.c create mode 100644 src/liblzma/common/filter_buffer_encoder.c create mode 100644 src/liblzma/common/filter_common.c create mode 100644 src/liblzma/common/filter_common.h create mode 100644 src/liblzma/common/filter_decoder.c create mode 100644 src/liblzma/common/filter_decoder.h create mode 100644 src/liblzma/common/filter_encoder.c create mode 100644 src/liblzma/common/filter_encoder.h create mode 100644 src/liblzma/common/filter_flags_decoder.c create mode 100644 src/liblzma/common/filter_flags_encoder.c create mode 100644 src/liblzma/common/hardware_cputhreads.c create mode 100644 src/liblzma/common/hardware_physmem.c create mode 100644 src/liblzma/common/index.c create mode 100644 src/liblzma/common/index.h create mode 100644 src/liblzma/common/index_decoder.c create mode 100644 src/liblzma/common/index_decoder.h create mode 100644 src/liblzma/common/index_encoder.c create mode 100644 src/liblzma/common/index_encoder.h create mode 100644 src/liblzma/common/index_hash.c create mode 100644 src/liblzma/common/lzip_decoder.c create mode 100644 src/liblzma/common/lzip_decoder.h create mode 100644 src/liblzma/common/memcmplen.h create mode 100644 src/liblzma/common/microlzma_decoder.c create mode 100644 src/liblzma/common/microlzma_encoder.c create mode 100644 src/liblzma/common/outqueue.c create mode 100644 src/liblzma/common/outqueue.h create mode 100644 src/liblzma/common/stream_buffer_decoder.c create mode 100644 src/liblzma/common/stream_buffer_encoder.c create mode 100644 src/liblzma/common/stream_decoder.c create mode 100644 src/liblzma/common/stream_decoder.h create mode 100644 src/liblzma/common/stream_decoder_mt.c create mode 100644 src/liblzma/common/stream_encoder.c create mode 100644 src/liblzma/common/stream_encoder_mt.c create mode 100644 src/liblzma/common/stream_flags_common.c create mode 100644 src/liblzma/common/stream_flags_common.h create mode 100644 src/liblzma/common/stream_flags_decoder.c create mode 100644 src/liblzma/common/stream_flags_encoder.c create mode 100644 src/liblzma/common/string_conversion.c create mode 100644 src/liblzma/common/vli_decoder.c create mode 100644 src/liblzma/common/vli_encoder.c create mode 100644 src/liblzma/common/vli_size.c create mode 100644 src/liblzma/delta/Makefile.inc create mode 100644 src/liblzma/delta/delta_common.c create mode 100644 src/liblzma/delta/delta_common.h create mode 100644 src/liblzma/delta/delta_decoder.c create mode 100644 src/liblzma/delta/delta_decoder.h create mode 100644 src/liblzma/delta/delta_encoder.c create mode 100644 src/liblzma/delta/delta_encoder.h create mode 100644 src/liblzma/delta/delta_private.h create mode 100644 src/liblzma/liblzma.pc.in create mode 100644 src/liblzma/liblzma_generic.map create mode 100644 src/liblzma/liblzma_linux.map create mode 100644 src/liblzma/liblzma_w32res.rc create mode 100644 src/liblzma/lz/Makefile.inc create mode 100644 src/liblzma/lz/lz_decoder.c create mode 100644 src/liblzma/lz/lz_decoder.h create mode 100644 src/liblzma/lz/lz_encoder.c create mode 100644 src/liblzma/lz/lz_encoder.h create mode 100644 src/liblzma/lz/lz_encoder_hash.h create mode 100644 src/liblzma/lz/lz_encoder_hash_table.h create mode 100644 src/liblzma/lz/lz_encoder_mf.c create mode 100644 src/liblzma/lzma/Makefile.inc create mode 100644 src/liblzma/lzma/fastpos.h create mode 100644 src/liblzma/lzma/fastpos_table.c create mode 100644 src/liblzma/lzma/fastpos_tablegen.c create mode 100644 src/liblzma/lzma/lzma2_decoder.c create mode 100644 src/liblzma/lzma/lzma2_decoder.h create mode 100644 src/liblzma/lzma/lzma2_encoder.c create mode 100644 src/liblzma/lzma/lzma2_encoder.h create mode 100644 src/liblzma/lzma/lzma_common.h create mode 100644 src/liblzma/lzma/lzma_decoder.c create mode 100644 src/liblzma/lzma/lzma_decoder.h create mode 100644 src/liblzma/lzma/lzma_encoder.c create mode 100644 src/liblzma/lzma/lzma_encoder.h create mode 100644 src/liblzma/lzma/lzma_encoder_optimum_fast.c create mode 100644 src/liblzma/lzma/lzma_encoder_optimum_normal.c create mode 100644 src/liblzma/lzma/lzma_encoder_presets.c create mode 100644 src/liblzma/lzma/lzma_encoder_private.h create mode 100644 src/liblzma/rangecoder/Makefile.inc create mode 100644 src/liblzma/rangecoder/price.h create mode 100644 src/liblzma/rangecoder/price_table.c create mode 100644 src/liblzma/rangecoder/price_tablegen.c create mode 100644 src/liblzma/rangecoder/range_common.h create mode 100644 src/liblzma/rangecoder/range_decoder.h create mode 100644 src/liblzma/rangecoder/range_encoder.h create mode 100644 src/liblzma/simple/Makefile.inc create mode 100644 src/liblzma/simple/arm.c create mode 100644 src/liblzma/simple/arm64.c create mode 100644 src/liblzma/simple/armthumb.c create mode 100644 src/liblzma/simple/ia64.c create mode 100644 src/liblzma/simple/powerpc.c create mode 100644 src/liblzma/simple/simple_coder.c create mode 100644 src/liblzma/simple/simple_coder.h create mode 100644 src/liblzma/simple/simple_decoder.c create mode 100644 src/liblzma/simple/simple_decoder.h create mode 100644 src/liblzma/simple/simple_encoder.c create mode 100644 src/liblzma/simple/simple_encoder.h create mode 100644 src/liblzma/simple/simple_private.h create mode 100644 src/liblzma/simple/sparc.c create mode 100644 src/liblzma/simple/x86.c create mode 100644 src/liblzma/validate_map.sh create mode 100644 src/lzmainfo/Makefile.am create mode 100644 src/lzmainfo/Makefile.in create mode 100644 src/lzmainfo/lzmainfo.1 create mode 100644 src/lzmainfo/lzmainfo.c create mode 100644 src/lzmainfo/lzmainfo_w32res.rc create mode 100644 src/scripts/Makefile.am create mode 100644 src/scripts/Makefile.in create mode 100644 src/scripts/xzdiff.1 create mode 100644 src/scripts/xzdiff.in create mode 100644 src/scripts/xzgrep.1 create mode 100644 src/scripts/xzgrep.in create mode 100644 src/scripts/xzless.1 create mode 100644 src/scripts/xzless.in create mode 100644 src/scripts/xzmore.1 create mode 100644 src/scripts/xzmore.in create mode 100644 src/xz/Makefile.am create mode 100644 src/xz/Makefile.in create mode 100644 src/xz/args.c create mode 100644 src/xz/args.h create mode 100644 src/xz/coder.c create mode 100644 src/xz/coder.h create mode 100644 src/xz/file_io.c create mode 100644 src/xz/file_io.h create mode 100644 src/xz/hardware.c create mode 100644 src/xz/hardware.h create mode 100644 src/xz/list.c create mode 100644 src/xz/list.h create mode 100644 src/xz/main.c create mode 100644 src/xz/main.h create mode 100644 src/xz/message.c create mode 100644 src/xz/message.h create mode 100644 src/xz/mytime.c create mode 100644 src/xz/mytime.h create mode 100644 src/xz/options.c create mode 100644 src/xz/options.h create mode 100644 src/xz/private.h create mode 100644 src/xz/signals.c create mode 100644 src/xz/signals.h create mode 100644 src/xz/suffix.c create mode 100644 src/xz/suffix.h create mode 100644 src/xz/util.c create mode 100644 src/xz/util.h create mode 100644 src/xz/xz.1 create mode 100644 src/xz/xz_w32res.rc create mode 100644 src/xzdec/Makefile.am create mode 100644 src/xzdec/Makefile.in create mode 100644 src/xzdec/lzmadec_w32res.rc create mode 100644 src/xzdec/xzdec.1 create mode 100644 src/xzdec/xzdec.c create mode 100644 src/xzdec/xzdec_w32res.rc (limited to 'src') diff --git a/src/Makefile.am b/src/Makefile.am new file mode 100644 index 0000000..d199e85 --- /dev/null +++ b/src/Makefile.am @@ -0,0 +1,42 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +SUBDIRS = liblzma xzdec + +if COND_XZ +SUBDIRS += xz +endif + +if COND_LZMAINFO +SUBDIRS += lzmainfo +endif + +if COND_SCRIPTS +SUBDIRS += scripts +endif + +EXTRA_DIST = \ + common/common_w32res.rc \ + common/mythread.h \ + common/sysdefs.h \ + common/tuklib_common.h \ + common/tuklib_config.h \ + common/tuklib_cpucores.c \ + common/tuklib_cpucores.h \ + common/tuklib_exit.c \ + common/tuklib_exit.h \ + common/tuklib_gettext.h \ + common/tuklib_integer.h \ + common/tuklib_mbstr_fw.c \ + common/tuklib_mbstr.h \ + common/tuklib_mbstr_width.c \ + common/tuklib_open_stdxxx.c \ + common/tuklib_open_stdxxx.h \ + common/tuklib_physmem.c \ + common/tuklib_physmem.h \ + common/tuklib_progname.c \ + common/tuklib_progname.h diff --git a/src/Makefile.in b/src/Makefile.in new file mode 100644 index 0000000..d9827e9 --- /dev/null +++ b/src/Makefile.in @@ -0,0 +1,696 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@COND_XZ_TRUE@am__append_1 = xz +@COND_LZMAINFO_TRUE@am__append_2 = lzmainfo +@COND_SCRIPTS_TRUE@am__append_3 = scripts +subdir = src +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_capsicum.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/getopt.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/posix-shell.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/tuklib_common.m4 \ + $(top_srcdir)/m4/tuklib_cpucores.m4 \ + $(top_srcdir)/m4/tuklib_integer.m4 \ + $(top_srcdir)/m4/tuklib_mbstr.m4 \ + $(top_srcdir)/m4/tuklib_physmem.m4 \ + $(top_srcdir)/m4/tuklib_progname.m4 \ + $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir distdir-am +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +DIST_SUBDIRS = liblzma xzdec xz lzmainfo scripts +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAPSICUM_LIB = @CAPSICUM_LIB@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +GETOPT_H = @GETOPT_H@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +HAVE_VISIBILITY = @HAVE_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_EXEEXT = @LN_EXEEXT@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ +POSUB = @POSUB@ +PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +enable_path_for_scripts = @enable_path_for_scripts@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xz = @xz@ +SUBDIRS = liblzma xzdec $(am__append_1) $(am__append_2) \ + $(am__append_3) +EXTRA_DIST = \ + common/common_w32res.rc \ + common/mythread.h \ + common/sysdefs.h \ + common/tuklib_common.h \ + common/tuklib_config.h \ + common/tuklib_cpucores.c \ + common/tuklib_cpucores.h \ + common/tuklib_exit.c \ + common/tuklib_exit.h \ + common/tuklib_gettext.h \ + common/tuklib_integer.h \ + common/tuklib_mbstr_fw.c \ + common/tuklib_mbstr.h \ + common/tuklib_mbstr_width.c \ + common/tuklib_open_stdxxx.c \ + common/tuklib_open_stdxxx.h \ + common/tuklib_physmem.c \ + common/tuklib_physmem.h \ + common/tuklib_progname.c \ + common/tuklib_progname.h + +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign src/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic clean-libtool cscopelist-am ctags \ + ctags-am distclean distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/common/common_w32res.rc b/src/common/common_w32res.rc new file mode 100644 index 0000000..d05d22e --- /dev/null +++ b/src/common/common_w32res.rc @@ -0,0 +1,52 @@ +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#include +#ifdef HAVE_CONFIG_H +# include "config.h" +#endif +#define LZMA_H_INTERNAL +#define LZMA_H_INTERNAL_RC +#include "lzma/version.h" + +#ifndef MY_BUILD +# define MY_BUILD 0 +#endif +#define MY_VERSION LZMA_VERSION_MAJOR,LZMA_VERSION_MINOR,LZMA_VERSION_PATCH,MY_BUILD + +#define MY_FILENAME MY_NAME MY_SUFFIX +#define MY_COMPANY "The Tukaani Project " +#define MY_PRODUCT PACKAGE_NAME " <" PACKAGE_URL ">" + +LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US +VS_VERSION_INFO VERSIONINFO + FILEVERSION MY_VERSION + PRODUCTVERSION MY_VERSION + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_NT_WINDOWS32 + FILETYPE MY_TYPE + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "CompanyName", MY_COMPANY + VALUE "FileDescription", MY_DESC + VALUE "FileVersion", LZMA_VERSION_STRING + VALUE "InternalName", MY_NAME + VALUE "OriginalFilename", MY_FILENAME + VALUE "ProductName", MY_PRODUCT + VALUE "ProductVersion", LZMA_VERSION_STRING + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END diff --git a/src/common/mythread.h b/src/common/mythread.h new file mode 100644 index 0000000..37b5216 --- /dev/null +++ b/src/common/mythread.h @@ -0,0 +1,528 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file mythread.h +/// \brief Some threading related helper macros and functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef MYTHREAD_H +#define MYTHREAD_H + +#include "sysdefs.h" + +// If any type of threading is enabled, #define MYTHREAD_ENABLED. +#if defined(MYTHREAD_POSIX) || defined(MYTHREAD_WIN95) \ + || defined(MYTHREAD_VISTA) +# define MYTHREAD_ENABLED 1 +#endif + + +#ifdef MYTHREAD_ENABLED + +//////////////////////////////////////// +// Shared between all threading types // +//////////////////////////////////////// + +// Locks a mutex for a duration of a block. +// +// Perform mythread_mutex_lock(&mutex) in the beginning of a block +// and mythread_mutex_unlock(&mutex) at the end of the block. "break" +// may be used to unlock the mutex and jump out of the block. +// mythread_sync blocks may be nested. +// +// Example: +// +// mythread_sync(mutex) { +// foo(); +// if (some_error) +// break; // Skips bar() +// bar(); +// } +// +// At least GCC optimizes the loops completely away so it doesn't slow +// things down at all compared to plain mythread_mutex_lock(&mutex) +// and mythread_mutex_unlock(&mutex) calls. +// +#define mythread_sync(mutex) mythread_sync_helper1(mutex, __LINE__) +#define mythread_sync_helper1(mutex, line) mythread_sync_helper2(mutex, line) +#define mythread_sync_helper2(mutex, line) \ + for (unsigned int mythread_i_ ## line = 0; \ + mythread_i_ ## line \ + ? (mythread_mutex_unlock(&(mutex)), 0) \ + : (mythread_mutex_lock(&(mutex)), 1); \ + mythread_i_ ## line = 1) \ + for (unsigned int mythread_j_ ## line = 0; \ + !mythread_j_ ## line; \ + mythread_j_ ## line = 1) +#endif + + +#if !defined(MYTHREAD_ENABLED) + +////////////////// +// No threading // +////////////////// + +// Calls the given function once. This isn't thread safe. +#define mythread_once(func) \ +do { \ + static bool once_ = false; \ + if (!once_) { \ + func(); \ + once_ = true; \ + } \ +} while (0) + + +#if !(defined(_WIN32) && !defined(__CYGWIN__)) +// Use sigprocmask() to set the signal mask in single-threaded programs. +#include + +static inline void +mythread_sigmask(int how, const sigset_t *restrict set, + sigset_t *restrict oset) +{ + int ret = sigprocmask(how, set, oset); + assert(ret == 0); + (void)ret; +} +#endif + + +#elif defined(MYTHREAD_POSIX) + +//////////////////// +// Using pthreads // +//////////////////// + +#include +#include +#include +#include + +// If clock_gettime() isn't available, use gettimeofday() from +// as a fallback. gettimeofday() is in SUSv2 and thus is supported on all +// relevant POSIX systems. +#ifndef HAVE_CLOCK_GETTIME +# include +#endif + +#define MYTHREAD_RET_TYPE void * +#define MYTHREAD_RET_VALUE NULL + +typedef pthread_t mythread; +typedef pthread_mutex_t mythread_mutex; + +typedef struct { + pthread_cond_t cond; +#ifdef HAVE_CLOCK_GETTIME + // Clock ID (CLOCK_REALTIME or CLOCK_MONOTONIC) associated with + // the condition variable. + clockid_t clk_id; +#endif +} mythread_cond; + +typedef struct timespec mythread_condtime; + + +// Calls the given function once in a thread-safe way. +#define mythread_once(func) \ + do { \ + static pthread_once_t once_ = PTHREAD_ONCE_INIT; \ + pthread_once(&once_, &func); \ + } while (0) + + +// Use pthread_sigmask() to set the signal mask in multi-threaded programs. +// Do nothing on OpenVMS since it lacks pthread_sigmask(). +static inline void +mythread_sigmask(int how, const sigset_t *restrict set, + sigset_t *restrict oset) +{ +#ifdef __VMS + (void)how; + (void)set; + (void)oset; +#else + int ret = pthread_sigmask(how, set, oset); + assert(ret == 0); + (void)ret; +#endif +} + + +// Creates a new thread with all signals blocked. Returns zero on success +// and non-zero on error. +static inline int +mythread_create(mythread *thread, void *(*func)(void *arg), void *arg) +{ + sigset_t old; + sigset_t all; + sigfillset(&all); + + mythread_sigmask(SIG_SETMASK, &all, &old); + const int ret = pthread_create(thread, NULL, func, arg); + mythread_sigmask(SIG_SETMASK, &old, NULL); + + return ret; +} + +// Joins a thread. Returns zero on success and non-zero on error. +static inline int +mythread_join(mythread thread) +{ + return pthread_join(thread, NULL); +} + + +// Initiatlizes a mutex. Returns zero on success and non-zero on error. +static inline int +mythread_mutex_init(mythread_mutex *mutex) +{ + return pthread_mutex_init(mutex, NULL); +} + +static inline void +mythread_mutex_destroy(mythread_mutex *mutex) +{ + int ret = pthread_mutex_destroy(mutex); + assert(ret == 0); + (void)ret; +} + +static inline void +mythread_mutex_lock(mythread_mutex *mutex) +{ + int ret = pthread_mutex_lock(mutex); + assert(ret == 0); + (void)ret; +} + +static inline void +mythread_mutex_unlock(mythread_mutex *mutex) +{ + int ret = pthread_mutex_unlock(mutex); + assert(ret == 0); + (void)ret; +} + + +// Initializes a condition variable. +// +// Using CLOCK_MONOTONIC instead of the default CLOCK_REALTIME makes the +// timeout in pthread_cond_timedwait() work correctly also if system time +// is suddenly changed. Unfortunately CLOCK_MONOTONIC isn't available +// everywhere while the default CLOCK_REALTIME is, so the default is +// used if CLOCK_MONOTONIC isn't available. +// +// If clock_gettime() isn't available at all, gettimeofday() will be used. +static inline int +mythread_cond_init(mythread_cond *mycond) +{ +#ifdef HAVE_CLOCK_GETTIME +# if defined(HAVE_PTHREAD_CONDATTR_SETCLOCK) && \ + defined(HAVE_CLOCK_MONOTONIC) + struct timespec ts; + pthread_condattr_t condattr; + + // POSIX doesn't seem to *require* that pthread_condattr_setclock() + // will fail if given an unsupported clock ID. Test that + // CLOCK_MONOTONIC really is supported using clock_gettime(). + if (clock_gettime(CLOCK_MONOTONIC, &ts) == 0 + && pthread_condattr_init(&condattr) == 0) { + int ret = pthread_condattr_setclock( + &condattr, CLOCK_MONOTONIC); + if (ret == 0) + ret = pthread_cond_init(&mycond->cond, &condattr); + + pthread_condattr_destroy(&condattr); + + if (ret == 0) { + mycond->clk_id = CLOCK_MONOTONIC; + return 0; + } + } + + // If anything above fails, fall back to the default CLOCK_REALTIME. + // POSIX requires that all implementations of clock_gettime() must + // support at least CLOCK_REALTIME. +# endif + + mycond->clk_id = CLOCK_REALTIME; +#endif + + return pthread_cond_init(&mycond->cond, NULL); +} + +static inline void +mythread_cond_destroy(mythread_cond *cond) +{ + int ret = pthread_cond_destroy(&cond->cond); + assert(ret == 0); + (void)ret; +} + +static inline void +mythread_cond_signal(mythread_cond *cond) +{ + int ret = pthread_cond_signal(&cond->cond); + assert(ret == 0); + (void)ret; +} + +static inline void +mythread_cond_wait(mythread_cond *cond, mythread_mutex *mutex) +{ + int ret = pthread_cond_wait(&cond->cond, mutex); + assert(ret == 0); + (void)ret; +} + +// Waits on a condition or until a timeout expires. If the timeout expires, +// non-zero is returned, otherwise zero is returned. +static inline int +mythread_cond_timedwait(mythread_cond *cond, mythread_mutex *mutex, + const mythread_condtime *condtime) +{ + int ret = pthread_cond_timedwait(&cond->cond, mutex, condtime); + assert(ret == 0 || ret == ETIMEDOUT); + return ret; +} + +// Sets condtime to the absolute time that is timeout_ms milliseconds +// in the future. The type of the clock to use is taken from cond. +static inline void +mythread_condtime_set(mythread_condtime *condtime, const mythread_cond *cond, + uint32_t timeout_ms) +{ + condtime->tv_sec = timeout_ms / 1000; + condtime->tv_nsec = (timeout_ms % 1000) * 1000000; + +#ifdef HAVE_CLOCK_GETTIME + struct timespec now; + int ret = clock_gettime(cond->clk_id, &now); + assert(ret == 0); + (void)ret; + + condtime->tv_sec += now.tv_sec; + condtime->tv_nsec += now.tv_nsec; +#else + (void)cond; + + struct timeval now; + gettimeofday(&now, NULL); + + condtime->tv_sec += now.tv_sec; + condtime->tv_nsec += now.tv_usec * 1000L; +#endif + + // tv_nsec must stay in the range [0, 999_999_999]. + if (condtime->tv_nsec >= 1000000000L) { + condtime->tv_nsec -= 1000000000L; + ++condtime->tv_sec; + } +} + + +#elif defined(MYTHREAD_WIN95) || defined(MYTHREAD_VISTA) + +///////////////////// +// Windows threads // +///////////////////// + +#define WIN32_LEAN_AND_MEAN +#ifdef MYTHREAD_VISTA +# undef _WIN32_WINNT +# define _WIN32_WINNT 0x0600 +#endif +#include +#include + +#define MYTHREAD_RET_TYPE unsigned int __stdcall +#define MYTHREAD_RET_VALUE 0 + +typedef HANDLE mythread; +typedef CRITICAL_SECTION mythread_mutex; + +#ifdef MYTHREAD_WIN95 +typedef HANDLE mythread_cond; +#else +typedef CONDITION_VARIABLE mythread_cond; +#endif + +typedef struct { + // Tick count (milliseconds) in the beginning of the timeout. + // NOTE: This is 32 bits so it wraps around after 49.7 days. + // Multi-day timeouts may not work as expected. + DWORD start; + + // Length of the timeout in milliseconds. The timeout expires + // when the current tick count minus "start" is equal or greater + // than "timeout". + DWORD timeout; +} mythread_condtime; + + +// mythread_once() is only available with Vista threads. +#ifdef MYTHREAD_VISTA +#define mythread_once(func) \ + do { \ + static INIT_ONCE once_ = INIT_ONCE_STATIC_INIT; \ + BOOL pending_; \ + if (!InitOnceBeginInitialize(&once_, 0, &pending_, NULL)) \ + abort(); \ + if (pending_) { \ + func(); \ + if (!InitOnceComplete(&once, 0, NULL)) \ + abort(); \ + } \ + } while (0) +#endif + + +// mythread_sigmask() isn't available on Windows. Even a dummy version would +// make no sense because the other POSIX signal functions are missing anyway. + + +static inline int +mythread_create(mythread *thread, + unsigned int (__stdcall *func)(void *arg), void *arg) +{ + uintptr_t ret = _beginthreadex(NULL, 0, func, arg, 0, NULL); + if (ret == 0) + return -1; + + *thread = (HANDLE)ret; + return 0; +} + +static inline int +mythread_join(mythread thread) +{ + int ret = 0; + + if (WaitForSingleObject(thread, INFINITE) != WAIT_OBJECT_0) + ret = -1; + + if (!CloseHandle(thread)) + ret = -1; + + return ret; +} + + +static inline int +mythread_mutex_init(mythread_mutex *mutex) +{ + InitializeCriticalSection(mutex); + return 0; +} + +static inline void +mythread_mutex_destroy(mythread_mutex *mutex) +{ + DeleteCriticalSection(mutex); +} + +static inline void +mythread_mutex_lock(mythread_mutex *mutex) +{ + EnterCriticalSection(mutex); +} + +static inline void +mythread_mutex_unlock(mythread_mutex *mutex) +{ + LeaveCriticalSection(mutex); +} + + +static inline int +mythread_cond_init(mythread_cond *cond) +{ +#ifdef MYTHREAD_WIN95 + *cond = CreateEvent(NULL, FALSE, FALSE, NULL); + return *cond == NULL ? -1 : 0; +#else + InitializeConditionVariable(cond); + return 0; +#endif +} + +static inline void +mythread_cond_destroy(mythread_cond *cond) +{ +#ifdef MYTHREAD_WIN95 + CloseHandle(*cond); +#else + (void)cond; +#endif +} + +static inline void +mythread_cond_signal(mythread_cond *cond) +{ +#ifdef MYTHREAD_WIN95 + SetEvent(*cond); +#else + WakeConditionVariable(cond); +#endif +} + +static inline void +mythread_cond_wait(mythread_cond *cond, mythread_mutex *mutex) +{ +#ifdef MYTHREAD_WIN95 + LeaveCriticalSection(mutex); + WaitForSingleObject(*cond, INFINITE); + EnterCriticalSection(mutex); +#else + BOOL ret = SleepConditionVariableCS(cond, mutex, INFINITE); + assert(ret); + (void)ret; +#endif +} + +static inline int +mythread_cond_timedwait(mythread_cond *cond, mythread_mutex *mutex, + const mythread_condtime *condtime) +{ +#ifdef MYTHREAD_WIN95 + LeaveCriticalSection(mutex); +#endif + + DWORD elapsed = GetTickCount() - condtime->start; + DWORD timeout = elapsed >= condtime->timeout + ? 0 : condtime->timeout - elapsed; + +#ifdef MYTHREAD_WIN95 + DWORD ret = WaitForSingleObject(*cond, timeout); + assert(ret == WAIT_OBJECT_0 || ret == WAIT_TIMEOUT); + + EnterCriticalSection(mutex); + + return ret == WAIT_TIMEOUT; +#else + BOOL ret = SleepConditionVariableCS(cond, mutex, timeout); + assert(ret || GetLastError() == ERROR_TIMEOUT); + return !ret; +#endif +} + +static inline void +mythread_condtime_set(mythread_condtime *condtime, const mythread_cond *cond, + uint32_t timeout) +{ + (void)cond; + condtime->start = GetTickCount(); + condtime->timeout = timeout; +} + +#endif + +#endif diff --git a/src/common/sysdefs.h b/src/common/sysdefs.h new file mode 100644 index 0000000..97be4ee --- /dev/null +++ b/src/common/sysdefs.h @@ -0,0 +1,189 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file sysdefs.h +/// \brief Common includes, definitions, system-specific things etc. +/// +/// This file is used also by the lzma command line tool, that's why this +/// file is separate from common.h. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_SYSDEFS_H +#define LZMA_SYSDEFS_H + +////////////// +// Includes // +////////////// + +#ifdef HAVE_CONFIG_H +# include +#endif + +// Get standard-compliant stdio functions under MinGW and MinGW-w64. +#ifdef __MINGW32__ +# define __USE_MINGW_ANSI_STDIO 1 +#endif + +// size_t and NULL +#include + +#ifdef HAVE_INTTYPES_H +# include +#endif + +// C99 says that inttypes.h always includes stdint.h, but some systems +// don't do that, and require including stdint.h separately. +#ifdef HAVE_STDINT_H +# include +#endif + +// Some pre-C99 systems have SIZE_MAX in limits.h instead of stdint.h. The +// limits are also used to figure out some macros missing from pre-C99 systems. +#include + +// Be more compatible with systems that have non-conforming inttypes.h. +// We assume that int is 32-bit and that long is either 32-bit or 64-bit. +// Full Autoconf test could be more correct, but this should work well enough. +// Note that this duplicates some code from lzma.h, but this is better since +// we can work without inttypes.h thanks to Autoconf tests. +#ifndef UINT32_C +# if UINT_MAX != 4294967295U +# error UINT32_C is not defined and unsigned int is not 32-bit. +# endif +# define UINT32_C(n) n ## U +#endif +#ifndef UINT32_MAX +# define UINT32_MAX UINT32_C(4294967295) +#endif +#ifndef PRIu32 +# define PRIu32 "u" +#endif +#ifndef PRIx32 +# define PRIx32 "x" +#endif +#ifndef PRIX32 +# define PRIX32 "X" +#endif + +#if ULONG_MAX == 4294967295UL +# ifndef UINT64_C +# define UINT64_C(n) n ## ULL +# endif +# ifndef PRIu64 +# define PRIu64 "llu" +# endif +# ifndef PRIx64 +# define PRIx64 "llx" +# endif +# ifndef PRIX64 +# define PRIX64 "llX" +# endif +#else +# ifndef UINT64_C +# define UINT64_C(n) n ## UL +# endif +# ifndef PRIu64 +# define PRIu64 "lu" +# endif +# ifndef PRIx64 +# define PRIx64 "lx" +# endif +# ifndef PRIX64 +# define PRIX64 "lX" +# endif +#endif +#ifndef UINT64_MAX +# define UINT64_MAX UINT64_C(18446744073709551615) +#endif + +// Incorrect(?) SIZE_MAX: +// - Interix headers typedef size_t to unsigned long, +// but a few lines later define SIZE_MAX to INT32_MAX. +// - SCO OpenServer (x86) headers typedef size_t to unsigned int +// but define SIZE_MAX to INT32_MAX. +#if defined(__INTERIX) || defined(_SCO_DS) +# undef SIZE_MAX +#endif + +// The code currently assumes that size_t is either 32-bit or 64-bit. +#ifndef SIZE_MAX +# if SIZEOF_SIZE_T == 4 +# define SIZE_MAX UINT32_MAX +# elif SIZEOF_SIZE_T == 8 +# define SIZE_MAX UINT64_MAX +# else +# error size_t is not 32-bit or 64-bit +# endif +#endif +#if SIZE_MAX != UINT32_MAX && SIZE_MAX != UINT64_MAX +# error size_t is not 32-bit or 64-bit +#endif + +#include +#include + +// Pre-C99 systems lack stdbool.h. All the code in XZ Utils must be written +// so that it works with fake bool type, for example: +// +// bool foo = (flags & 0x100) != 0; +// bool bar = !!(flags & 0x100); +// +// This works with the real C99 bool but breaks with fake bool: +// +// bool baz = (flags & 0x100); +// +#ifdef HAVE_STDBOOL_H +# include +#else +# if ! HAVE__BOOL +typedef unsigned char _Bool; +# endif +# define bool _Bool +# define false 0 +# define true 1 +# define __bool_true_false_are_defined 1 +#endif + +#include + +// As of MSVC 2013, inline and restrict are supported with +// non-standard keywords. +#if defined(_WIN32) && defined(_MSC_VER) +# ifndef inline +# define inline __inline +# endif +# ifndef restrict +# define restrict __restrict +# endif +#endif + +//////////// +// Macros // +//////////// + +#undef memzero +#define memzero(s, n) memset(s, 0, n) + +// NOTE: Avoid using MIN() and MAX(), because even conditionally defining +// those macros can cause some portability trouble, since on some systems +// the system headers insist defining their own versions. +#define my_min(x, y) ((x) < (y) ? (x) : (y)) +#define my_max(x, y) ((x) > (y) ? (x) : (y)) + +#ifndef ARRAY_SIZE +# define ARRAY_SIZE(array) (sizeof(array) / sizeof((array)[0])) +#endif + +#if defined(__GNUC__) \ + && ((__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4) +# define lzma_attr_alloc_size(x) __attribute__((__alloc_size__(x))) +#else +# define lzma_attr_alloc_size(x) +#endif + +#endif diff --git a/src/common/tuklib_common.h b/src/common/tuklib_common.h new file mode 100644 index 0000000..b1f531e --- /dev/null +++ b/src/common/tuklib_common.h @@ -0,0 +1,71 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_common.h +/// \brief Common definitions for tuklib modules +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_COMMON_H +#define TUKLIB_COMMON_H + +// The config file may be replaced by a package-specific file. +// It should include at least stddef.h, stdbool.h, inttypes.h, and limits.h. +#include "tuklib_config.h" + +// TUKLIB_SYMBOL_PREFIX is prefixed to all symbols exported by +// the tuklib modules. If you use a tuklib module in a library, +// you should use TUKLIB_SYMBOL_PREFIX to make sure that there +// are no symbol conflicts in case someone links your library +// into application that also uses the same tuklib module. +#ifndef TUKLIB_SYMBOL_PREFIX +# define TUKLIB_SYMBOL_PREFIX +#endif + +#define TUKLIB_CAT_X(a, b) a ## b +#define TUKLIB_CAT(a, b) TUKLIB_CAT_X(a, b) + +#ifndef TUKLIB_SYMBOL +# define TUKLIB_SYMBOL(sym) TUKLIB_CAT(TUKLIB_SYMBOL_PREFIX, sym) +#endif + +#ifndef TUKLIB_DECLS_BEGIN +# ifdef __cplusplus +# define TUKLIB_DECLS_BEGIN extern "C" { +# else +# define TUKLIB_DECLS_BEGIN +# endif +#endif + +#ifndef TUKLIB_DECLS_END +# ifdef __cplusplus +# define TUKLIB_DECLS_END } +# else +# define TUKLIB_DECLS_END +# endif +#endif + +#if defined(__GNUC__) && defined(__GNUC_MINOR__) +# define TUKLIB_GNUC_REQ(major, minor) \ + ((__GNUC__ == (major) && __GNUC_MINOR__ >= (minor)) \ + || __GNUC__ > (major)) +#else +# define TUKLIB_GNUC_REQ(major, minor) 0 +#endif + +#if TUKLIB_GNUC_REQ(2, 5) +# define tuklib_attr_noreturn __attribute__((__noreturn__)) +#else +# define tuklib_attr_noreturn +#endif + +#if (defined(_WIN32) && !defined(__CYGWIN__)) \ + || defined(__OS2__) || defined(__MSDOS__) +# define TUKLIB_DOSLIKE 1 +#endif + +#endif diff --git a/src/common/tuklib_config.h b/src/common/tuklib_config.h new file mode 100644 index 0000000..9d470ba --- /dev/null +++ b/src/common/tuklib_config.h @@ -0,0 +1,10 @@ +// If config.h isn't available, assume that the headers required by +// tuklib_common.h are available. This is required by crc32_tablegen.c. +#ifdef HAVE_CONFIG_H +# include "sysdefs.h" +#else +# include +# include +# include +# include +#endif diff --git a/src/common/tuklib_cpucores.c b/src/common/tuklib_cpucores.c new file mode 100644 index 0000000..bb3f2f7 --- /dev/null +++ b/src/common/tuklib_cpucores.c @@ -0,0 +1,109 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_cpucores.c +/// \brief Get the number of CPU cores online +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "tuklib_cpucores.h" + +#if defined(_WIN32) || defined(__CYGWIN__) +# ifndef _WIN32_WINNT +# define _WIN32_WINNT 0x0500 +# endif +# include + +// glibc >= 2.9 +#elif defined(TUKLIB_CPUCORES_SCHED_GETAFFINITY) +# include + +// FreeBSD +#elif defined(TUKLIB_CPUCORES_CPUSET) +# include +# include + +#elif defined(TUKLIB_CPUCORES_SYSCTL) +# ifdef HAVE_SYS_PARAM_H +# include +# endif +# include + +#elif defined(TUKLIB_CPUCORES_SYSCONF) +# include + +// HP-UX +#elif defined(TUKLIB_CPUCORES_PSTAT_GETDYNAMIC) +# include +# include +#endif + + +extern uint32_t +tuklib_cpucores(void) +{ + uint32_t ret = 0; + +#if defined(_WIN32) || defined(__CYGWIN__) + SYSTEM_INFO sysinfo; + GetSystemInfo(&sysinfo); + ret = sysinfo.dwNumberOfProcessors; + +#elif defined(TUKLIB_CPUCORES_SCHED_GETAFFINITY) + cpu_set_t cpu_mask; + if (sched_getaffinity(0, sizeof(cpu_mask), &cpu_mask) == 0) + ret = (uint32_t)CPU_COUNT(&cpu_mask); + +#elif defined(TUKLIB_CPUCORES_CPUSET) + cpuset_t set; + if (cpuset_getaffinity(CPU_LEVEL_WHICH, CPU_WHICH_PID, -1, + sizeof(set), &set) == 0) { +# ifdef CPU_COUNT + ret = (uint32_t)CPU_COUNT(&set); +# else + for (unsigned i = 0; i < CPU_SETSIZE; ++i) + if (CPU_ISSET(i, &set)) + ++ret; +# endif + } + +#elif defined(TUKLIB_CPUCORES_SYSCTL) + // On OpenBSD HW_NCPUONLINE tells the number of processor cores that + // are online so it is preferred over HW_NCPU which also counts cores + // that aren't currently available. The number of cores online is + // often less than HW_NCPU because OpenBSD disables simultaneous + // multi-threading (SMT) by default. +# ifdef HW_NCPUONLINE + int name[2] = { CTL_HW, HW_NCPUONLINE }; +# else + int name[2] = { CTL_HW, HW_NCPU }; +# endif + int cpus; + size_t cpus_size = sizeof(cpus); + if (sysctl(name, 2, &cpus, &cpus_size, NULL, 0) != -1 + && cpus_size == sizeof(cpus) && cpus > 0) + ret = (uint32_t)cpus; + +#elif defined(TUKLIB_CPUCORES_SYSCONF) +# ifdef _SC_NPROCESSORS_ONLN + // Most systems + const long cpus = sysconf(_SC_NPROCESSORS_ONLN); +# else + // IRIX + const long cpus = sysconf(_SC_NPROC_ONLN); +# endif + if (cpus > 0) + ret = (uint32_t)cpus; + +#elif defined(TUKLIB_CPUCORES_PSTAT_GETDYNAMIC) + struct pst_dynamic pst; + if (pstat_getdynamic(&pst, sizeof(pst), 1, 0) != -1) + ret = (uint32_t)pst.psd_proc_cnt; +#endif + + return ret; +} diff --git a/src/common/tuklib_cpucores.h b/src/common/tuklib_cpucores.h new file mode 100644 index 0000000..be1ce1c --- /dev/null +++ b/src/common/tuklib_cpucores.h @@ -0,0 +1,23 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_cpucores.h +/// \brief Get the number of CPU cores online +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_CPUCORES_H +#define TUKLIB_CPUCORES_H + +#include "tuklib_common.h" +TUKLIB_DECLS_BEGIN + +#define tuklib_cpucores TUKLIB_SYMBOL(tuklib_cpucores) +extern uint32_t tuklib_cpucores(void); + +TUKLIB_DECLS_END +#endif diff --git a/src/common/tuklib_exit.c b/src/common/tuklib_exit.c new file mode 100644 index 0000000..aa55620 --- /dev/null +++ b/src/common/tuklib_exit.c @@ -0,0 +1,58 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_exit.c +/// \brief Close stdout and stderr, and exit +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "tuklib_common.h" + +#include +#include +#include + +#include "tuklib_gettext.h" +#include "tuklib_progname.h" +#include "tuklib_exit.h" + + +extern void +tuklib_exit(int status, int err_status, int show_error) +{ + if (status != err_status) { + // Close stdout. If something goes wrong, + // print an error message to stderr. + const int ferror_err = ferror(stdout); + const int fclose_err = fclose(stdout); + if (ferror_err || fclose_err) { + status = err_status; + + // If it was fclose() that failed, we have the reason + // in errno. If only ferror() indicated an error, + // we have no idea what the reason was. + if (show_error) + fprintf(stderr, "%s: %s: %s\n", progname, + _("Writing to standard " + "output failed"), + fclose_err ? strerror(errno) + : _("Unknown error")); + } + } + + if (status != err_status) { + // Close stderr. If something goes wrong, there's + // nothing where we could print an error message. + // Just set the exit status. + const int ferror_err = ferror(stderr); + const int fclose_err = fclose(stderr); + if (fclose_err || ferror_err) + status = err_status; + } + + exit(status); +} diff --git a/src/common/tuklib_exit.h b/src/common/tuklib_exit.h new file mode 100644 index 0000000..b11776f --- /dev/null +++ b/src/common/tuklib_exit.h @@ -0,0 +1,25 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_exit.h +/// \brief Close stdout and stderr, and exit +/// \note Requires tuklib_progname and tuklib_gettext modules +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_EXIT_H +#define TUKLIB_EXIT_H + +#include "tuklib_common.h" +TUKLIB_DECLS_BEGIN + +#define tuklib_exit TUKLIB_SYMBOL(tuklib_exit) +extern void tuklib_exit(int status, int err_status, int show_error) + tuklib_attr_noreturn; + +TUKLIB_DECLS_END +#endif diff --git a/src/common/tuklib_gettext.h b/src/common/tuklib_gettext.h new file mode 100644 index 0000000..ff18904 --- /dev/null +++ b/src/common/tuklib_gettext.h @@ -0,0 +1,44 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_gettext.h +/// \brief Wrapper for gettext and friends +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_GETTEXT_H +#define TUKLIB_GETTEXT_H + +#include "tuklib_common.h" +#include + +#ifndef TUKLIB_GETTEXT +# ifdef ENABLE_NLS +# define TUKLIB_GETTEXT 1 +# else +# define TUKLIB_GETTEXT 0 +# endif +#endif + +#if TUKLIB_GETTEXT +# include +# define tuklib_gettext_init(package, localedir) \ + do { \ + setlocale(LC_ALL, ""); \ + bindtextdomain(package, localedir); \ + textdomain(package); \ + } while (0) +# define _(msgid) gettext(msgid) +#else +# define tuklib_gettext_init(package, localedir) \ + setlocale(LC_ALL, "") +# define _(msgid) (msgid) +# define ngettext(msgid1, msgid2, n) ((n) == 1 ? (msgid1) : (msgid2)) +#endif +#define N_(msgid) msgid + +#endif diff --git a/src/common/tuklib_integer.h b/src/common/tuklib_integer.h new file mode 100644 index 0000000..b58ef68 --- /dev/null +++ b/src/common/tuklib_integer.h @@ -0,0 +1,784 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_integer.h +/// \brief Various integer and bit operations +/// +/// This file provides macros or functions to do some basic integer and bit +/// operations. +/// +/// Native endian inline functions (XX = 16, 32, or 64): +/// - Unaligned native endian reads: readXXne(ptr) +/// - Unaligned native endian writes: writeXXne(ptr, num) +/// - Aligned native endian reads: aligned_readXXne(ptr) +/// - Aligned native endian writes: aligned_writeXXne(ptr, num) +/// +/// Endianness-converting integer operations (these can be macros!) +/// (XX = 16, 32, or 64; Y = b or l): +/// - Byte swapping: bswapXX(num) +/// - Byte order conversions to/from native (byteswaps if Y isn't +/// the native endianness): convXXYe(num) +/// - Unaligned reads: readXXYe(ptr) +/// - Unaligned writes: writeXXYe(ptr, num) +/// - Aligned reads: aligned_readXXYe(ptr) +/// - Aligned writes: aligned_writeXXYe(ptr, num) +/// +/// Since the above can macros, the arguments should have no side effects +/// because they may be evaluated more than once. +/// +/// Bit scan operations for non-zero 32-bit integers (inline functions): +/// - Bit scan reverse (find highest non-zero bit): bsr32(num) +/// - Count leading zeros: clz32(num) +/// - Count trailing zeros: ctz32(num) +/// - Bit scan forward (simply an alias for ctz32()): bsf32(num) +/// +/// The above bit scan operations return 0-31. If num is zero, +/// the result is undefined. +// +// Authors: Lasse Collin +// Joachim Henke +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_INTEGER_H +#define TUKLIB_INTEGER_H + +#include "tuklib_common.h" +#include + +// Newer Intel C compilers require immintrin.h for _bit_scan_reverse() +// and such functions. +#if defined(__INTEL_COMPILER) && (__INTEL_COMPILER >= 1500) +# include +#endif + + +/////////////////// +// Byte swapping // +/////////////////// + +#if defined(HAVE___BUILTIN_BSWAPXX) + // GCC >= 4.8 and Clang +# define bswap16(n) __builtin_bswap16(n) +# define bswap32(n) __builtin_bswap32(n) +# define bswap64(n) __builtin_bswap64(n) + +#elif defined(HAVE_BYTESWAP_H) + // glibc, uClibc, dietlibc +# include +# ifdef HAVE_BSWAP_16 +# define bswap16(num) bswap_16(num) +# endif +# ifdef HAVE_BSWAP_32 +# define bswap32(num) bswap_32(num) +# endif +# ifdef HAVE_BSWAP_64 +# define bswap64(num) bswap_64(num) +# endif + +#elif defined(HAVE_SYS_ENDIAN_H) + // *BSDs and Darwin +# include + +#elif defined(HAVE_SYS_BYTEORDER_H) + // Solaris +# include +# ifdef BSWAP_16 +# define bswap16(num) BSWAP_16(num) +# endif +# ifdef BSWAP_32 +# define bswap32(num) BSWAP_32(num) +# endif +# ifdef BSWAP_64 +# define bswap64(num) BSWAP_64(num) +# endif +# ifdef BE_16 +# define conv16be(num) BE_16(num) +# endif +# ifdef BE_32 +# define conv32be(num) BE_32(num) +# endif +# ifdef BE_64 +# define conv64be(num) BE_64(num) +# endif +# ifdef LE_16 +# define conv16le(num) LE_16(num) +# endif +# ifdef LE_32 +# define conv32le(num) LE_32(num) +# endif +# ifdef LE_64 +# define conv64le(num) LE_64(num) +# endif +#endif + +#ifndef bswap16 +# define bswap16(n) (uint16_t)( \ + (((n) & 0x00FFU) << 8) \ + | (((n) & 0xFF00U) >> 8) \ + ) +#endif + +#ifndef bswap32 +# define bswap32(n) (uint32_t)( \ + (((n) & UINT32_C(0x000000FF)) << 24) \ + | (((n) & UINT32_C(0x0000FF00)) << 8) \ + | (((n) & UINT32_C(0x00FF0000)) >> 8) \ + | (((n) & UINT32_C(0xFF000000)) >> 24) \ + ) +#endif + +#ifndef bswap64 +# define bswap64(n) (uint64_t)( \ + (((n) & UINT64_C(0x00000000000000FF)) << 56) \ + | (((n) & UINT64_C(0x000000000000FF00)) << 40) \ + | (((n) & UINT64_C(0x0000000000FF0000)) << 24) \ + | (((n) & UINT64_C(0x00000000FF000000)) << 8) \ + | (((n) & UINT64_C(0x000000FF00000000)) >> 8) \ + | (((n) & UINT64_C(0x0000FF0000000000)) >> 24) \ + | (((n) & UINT64_C(0x00FF000000000000)) >> 40) \ + | (((n) & UINT64_C(0xFF00000000000000)) >> 56) \ + ) +#endif + +// Define conversion macros using the basic byte swapping macros. +#ifdef WORDS_BIGENDIAN +# ifndef conv16be +# define conv16be(num) ((uint16_t)(num)) +# endif +# ifndef conv32be +# define conv32be(num) ((uint32_t)(num)) +# endif +# ifndef conv64be +# define conv64be(num) ((uint64_t)(num)) +# endif +# ifndef conv16le +# define conv16le(num) bswap16(num) +# endif +# ifndef conv32le +# define conv32le(num) bswap32(num) +# endif +# ifndef conv64le +# define conv64le(num) bswap64(num) +# endif +#else +# ifndef conv16be +# define conv16be(num) bswap16(num) +# endif +# ifndef conv32be +# define conv32be(num) bswap32(num) +# endif +# ifndef conv64be +# define conv64be(num) bswap64(num) +# endif +# ifndef conv16le +# define conv16le(num) ((uint16_t)(num)) +# endif +# ifndef conv32le +# define conv32le(num) ((uint32_t)(num)) +# endif +# ifndef conv64le +# define conv64le(num) ((uint64_t)(num)) +# endif +#endif + + +//////////////////////////////// +// Unaligned reads and writes // +//////////////////////////////// + +// The traditional way of casting e.g. *(const uint16_t *)uint8_pointer +// is bad even if the uint8_pointer is properly aligned because this kind +// of casts break strict aliasing rules and result in undefined behavior. +// With unaligned pointers it's even worse: compilers may emit vector +// instructions that require aligned pointers even if non-vector +// instructions work with unaligned pointers. +// +// Using memcpy() is the standard compliant way to do unaligned access. +// Many modern compilers inline it so there is no function call overhead. +// For those compilers that don't handle the memcpy() method well, the +// old casting method (that violates strict aliasing) can be requested at +// build time. A third method, casting to a packed struct, would also be +// an option but isn't provided to keep things simpler (it's already a mess). +// Hopefully this is flexible enough in practice. + +static inline uint16_t +read16ne(const uint8_t *buf) +{ +#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) + return *(const uint16_t *)buf; +#else + uint16_t num; + memcpy(&num, buf, sizeof(num)); + return num; +#endif +} + + +static inline uint32_t +read32ne(const uint8_t *buf) +{ +#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) + return *(const uint32_t *)buf; +#else + uint32_t num; + memcpy(&num, buf, sizeof(num)); + return num; +#endif +} + + +static inline uint64_t +read64ne(const uint8_t *buf) +{ +#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) + return *(const uint64_t *)buf; +#else + uint64_t num; + memcpy(&num, buf, sizeof(num)); + return num; +#endif +} + + +static inline void +write16ne(uint8_t *buf, uint16_t num) +{ +#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) + *(uint16_t *)buf = num; +#else + memcpy(buf, &num, sizeof(num)); +#endif + return; +} + + +static inline void +write32ne(uint8_t *buf, uint32_t num) +{ +#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) + *(uint32_t *)buf = num; +#else + memcpy(buf, &num, sizeof(num)); +#endif + return; +} + + +static inline void +write64ne(uint8_t *buf, uint64_t num) +{ +#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) + *(uint64_t *)buf = num; +#else + memcpy(buf, &num, sizeof(num)); +#endif + return; +} + + +static inline uint16_t +read16be(const uint8_t *buf) +{ +#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) + uint16_t num = read16ne(buf); + return conv16be(num); +#else + uint16_t num = ((uint16_t)buf[0] << 8) | (uint16_t)buf[1]; + return num; +#endif +} + + +static inline uint16_t +read16le(const uint8_t *buf) +{ +#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) + uint16_t num = read16ne(buf); + return conv16le(num); +#else + uint16_t num = ((uint16_t)buf[0]) | ((uint16_t)buf[1] << 8); + return num; +#endif +} + + +static inline uint32_t +read32be(const uint8_t *buf) +{ +#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) + uint32_t num = read32ne(buf); + return conv32be(num); +#else + uint32_t num = (uint32_t)buf[0] << 24; + num |= (uint32_t)buf[1] << 16; + num |= (uint32_t)buf[2] << 8; + num |= (uint32_t)buf[3]; + return num; +#endif +} + + +static inline uint32_t +read32le(const uint8_t *buf) +{ +#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) + uint32_t num = read32ne(buf); + return conv32le(num); +#else + uint32_t num = (uint32_t)buf[0]; + num |= (uint32_t)buf[1] << 8; + num |= (uint32_t)buf[2] << 16; + num |= (uint32_t)buf[3] << 24; + return num; +#endif +} + + +static inline uint64_t +read64be(const uint8_t *buf) +{ +#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) + uint64_t num = read64ne(buf); + return conv64be(num); +#else + uint64_t num = (uint64_t)buf[0] << 56; + num |= (uint64_t)buf[1] << 48; + num |= (uint64_t)buf[2] << 40; + num |= (uint64_t)buf[3] << 32; + num |= (uint64_t)buf[4] << 24; + num |= (uint64_t)buf[5] << 16; + num |= (uint64_t)buf[6] << 8; + num |= (uint64_t)buf[7]; + return num; +#endif +} + + +static inline uint64_t +read64le(const uint8_t *buf) +{ +#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) + uint64_t num = read64ne(buf); + return conv64le(num); +#else + uint64_t num = (uint64_t)buf[0]; + num |= (uint64_t)buf[1] << 8; + num |= (uint64_t)buf[2] << 16; + num |= (uint64_t)buf[3] << 24; + num |= (uint64_t)buf[4] << 32; + num |= (uint64_t)buf[5] << 40; + num |= (uint64_t)buf[6] << 48; + num |= (uint64_t)buf[7] << 56; + return num; +#endif +} + + +// NOTE: Possible byte swapping must be done in a macro to allow the compiler +// to optimize byte swapping of constants when using glibc's or *BSD's +// byte swapping macros. The actual write is done in an inline function +// to make type checking of the buf pointer possible. +#if defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) +# define write16be(buf, num) write16ne(buf, conv16be(num)) +# define write32be(buf, num) write32ne(buf, conv32be(num)) +# define write64be(buf, num) write64ne(buf, conv64be(num)) +#endif + +#if !defined(WORDS_BIGENDIAN) || defined(TUKLIB_FAST_UNALIGNED_ACCESS) +# define write16le(buf, num) write16ne(buf, conv16le(num)) +# define write32le(buf, num) write32ne(buf, conv32le(num)) +# define write64le(buf, num) write64ne(buf, conv64le(num)) +#endif + + +#ifndef write16be +static inline void +write16be(uint8_t *buf, uint16_t num) +{ + buf[0] = (uint8_t)(num >> 8); + buf[1] = (uint8_t)num; + return; +} +#endif + + +#ifndef write16le +static inline void +write16le(uint8_t *buf, uint16_t num) +{ + buf[0] = (uint8_t)num; + buf[1] = (uint8_t)(num >> 8); + return; +} +#endif + + +#ifndef write32be +static inline void +write32be(uint8_t *buf, uint32_t num) +{ + buf[0] = (uint8_t)(num >> 24); + buf[1] = (uint8_t)(num >> 16); + buf[2] = (uint8_t)(num >> 8); + buf[3] = (uint8_t)num; + return; +} +#endif + + +#ifndef write32le +static inline void +write32le(uint8_t *buf, uint32_t num) +{ + buf[0] = (uint8_t)num; + buf[1] = (uint8_t)(num >> 8); + buf[2] = (uint8_t)(num >> 16); + buf[3] = (uint8_t)(num >> 24); + return; +} +#endif + + +////////////////////////////// +// Aligned reads and writes // +////////////////////////////// + +// Separate functions for aligned reads and writes are provided since on +// strict-align archs aligned access is much faster than unaligned access. +// +// Just like in the unaligned case, memcpy() is needed to avoid +// strict aliasing violations. However, on archs that don't support +// unaligned access the compiler cannot know that the pointers given +// to memcpy() are aligned which results in slow code. As of C11 there is +// no standard way to tell the compiler that we know that the address is +// aligned but some compilers have language extensions to do that. With +// such language extensions the memcpy() method gives excellent results. +// +// What to do on a strict-align system when no known language extentensions +// are available? Falling back to byte-by-byte access would be safe but ruin +// optimizations that have been made specifically with aligned access in mind. +// As a compromise, aligned reads will fall back to non-compliant type punning +// but aligned writes will be byte-by-byte, that is, fast reads are preferred +// over fast writes. This obviously isn't great but hopefully it's a working +// compromise for now. +// +// __builtin_assume_aligned is support by GCC >= 4.7 and clang >= 3.6. +#ifdef HAVE___BUILTIN_ASSUME_ALIGNED +# define tuklib_memcpy_aligned(dest, src, size) \ + memcpy(dest, __builtin_assume_aligned(src, size), size) +#else +# define tuklib_memcpy_aligned(dest, src, size) \ + memcpy(dest, src, size) +# ifndef TUKLIB_FAST_UNALIGNED_ACCESS +# define TUKLIB_USE_UNSAFE_ALIGNED_READS 1 +# endif +#endif + + +static inline uint16_t +aligned_read16ne(const uint8_t *buf) +{ +#if defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) \ + || defined(TUKLIB_USE_UNSAFE_ALIGNED_READS) + return *(const uint16_t *)buf; +#else + uint16_t num; + tuklib_memcpy_aligned(&num, buf, sizeof(num)); + return num; +#endif +} + + +static inline uint32_t +aligned_read32ne(const uint8_t *buf) +{ +#if defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) \ + || defined(TUKLIB_USE_UNSAFE_ALIGNED_READS) + return *(const uint32_t *)buf; +#else + uint32_t num; + tuklib_memcpy_aligned(&num, buf, sizeof(num)); + return num; +#endif +} + + +static inline uint64_t +aligned_read64ne(const uint8_t *buf) +{ +#if defined(TUKLIB_USE_UNSAFE_TYPE_PUNNING) \ + || defined(TUKLIB_USE_UNSAFE_ALIGNED_READS) + return *(const uint64_t *)buf; +#else + uint64_t num; + tuklib_memcpy_aligned(&num, buf, sizeof(num)); + return num; +#endif +} + + +static inline void +aligned_write16ne(uint8_t *buf, uint16_t num) +{ +#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING + *(uint16_t *)buf = num; +#else + tuklib_memcpy_aligned(buf, &num, sizeof(num)); +#endif + return; +} + + +static inline void +aligned_write32ne(uint8_t *buf, uint32_t num) +{ +#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING + *(uint32_t *)buf = num; +#else + tuklib_memcpy_aligned(buf, &num, sizeof(num)); +#endif + return; +} + + +static inline void +aligned_write64ne(uint8_t *buf, uint64_t num) +{ +#ifdef TUKLIB_USE_UNSAFE_TYPE_PUNNING + *(uint64_t *)buf = num; +#else + tuklib_memcpy_aligned(buf, &num, sizeof(num)); +#endif + return; +} + + +static inline uint16_t +aligned_read16be(const uint8_t *buf) +{ + uint16_t num = aligned_read16ne(buf); + return conv16be(num); +} + + +static inline uint16_t +aligned_read16le(const uint8_t *buf) +{ + uint16_t num = aligned_read16ne(buf); + return conv16le(num); +} + + +static inline uint32_t +aligned_read32be(const uint8_t *buf) +{ + uint32_t num = aligned_read32ne(buf); + return conv32be(num); +} + + +static inline uint32_t +aligned_read32le(const uint8_t *buf) +{ + uint32_t num = aligned_read32ne(buf); + return conv32le(num); +} + + +static inline uint64_t +aligned_read64be(const uint8_t *buf) +{ + uint64_t num = aligned_read64ne(buf); + return conv64be(num); +} + + +static inline uint64_t +aligned_read64le(const uint8_t *buf) +{ + uint64_t num = aligned_read64ne(buf); + return conv64le(num); +} + + +// These need to be macros like in the unaligned case. +#define aligned_write16be(buf, num) aligned_write16ne((buf), conv16be(num)) +#define aligned_write16le(buf, num) aligned_write16ne((buf), conv16le(num)) +#define aligned_write32be(buf, num) aligned_write32ne((buf), conv32be(num)) +#define aligned_write32le(buf, num) aligned_write32ne((buf), conv32le(num)) +#define aligned_write64be(buf, num) aligned_write64ne((buf), conv64be(num)) +#define aligned_write64le(buf, num) aligned_write64ne((buf), conv64le(num)) + + +//////////////////// +// Bit operations // +//////////////////// + +static inline uint32_t +bsr32(uint32_t n) +{ + // Check for ICC first, since it tends to define __GNUC__ too. +#if defined(__INTEL_COMPILER) + return _bit_scan_reverse(n); + +#elif TUKLIB_GNUC_REQ(3, 4) && UINT_MAX == UINT32_MAX + // GCC >= 3.4 has __builtin_clz(), which gives good results on + // multiple architectures. On x86, __builtin_clz() ^ 31U becomes + // either plain BSR (so the XOR gets optimized away) or LZCNT and + // XOR (if -march indicates that SSE4a instructions are supported). + return (uint32_t)__builtin_clz(n) ^ 31U; + +#elif defined(__GNUC__) && (defined(__i386__) || defined(__x86_64__)) + uint32_t i; + __asm__("bsrl %1, %0" : "=r" (i) : "rm" (n)); + return i; + +#elif defined(_MSC_VER) + unsigned long i; + _BitScanReverse(&i, n); + return i; + +#else + uint32_t i = 31; + + if ((n & 0xFFFF0000) == 0) { + n <<= 16; + i = 15; + } + + if ((n & 0xFF000000) == 0) { + n <<= 8; + i -= 8; + } + + if ((n & 0xF0000000) == 0) { + n <<= 4; + i -= 4; + } + + if ((n & 0xC0000000) == 0) { + n <<= 2; + i -= 2; + } + + if ((n & 0x80000000) == 0) + --i; + + return i; +#endif +} + + +static inline uint32_t +clz32(uint32_t n) +{ +#if defined(__INTEL_COMPILER) + return _bit_scan_reverse(n) ^ 31U; + +#elif TUKLIB_GNUC_REQ(3, 4) && UINT_MAX == UINT32_MAX + return (uint32_t)__builtin_clz(n); + +#elif defined(__GNUC__) && (defined(__i386__) || defined(__x86_64__)) + uint32_t i; + __asm__("bsrl %1, %0\n\t" + "xorl $31, %0" + : "=r" (i) : "rm" (n)); + return i; + +#elif defined(_MSC_VER) + unsigned long i; + _BitScanReverse(&i, n); + return i ^ 31U; + +#else + uint32_t i = 0; + + if ((n & 0xFFFF0000) == 0) { + n <<= 16; + i = 16; + } + + if ((n & 0xFF000000) == 0) { + n <<= 8; + i += 8; + } + + if ((n & 0xF0000000) == 0) { + n <<= 4; + i += 4; + } + + if ((n & 0xC0000000) == 0) { + n <<= 2; + i += 2; + } + + if ((n & 0x80000000) == 0) + ++i; + + return i; +#endif +} + + +static inline uint32_t +ctz32(uint32_t n) +{ +#if defined(__INTEL_COMPILER) + return _bit_scan_forward(n); + +#elif TUKLIB_GNUC_REQ(3, 4) && UINT_MAX >= UINT32_MAX + return (uint32_t)__builtin_ctz(n); + +#elif defined(__GNUC__) && (defined(__i386__) || defined(__x86_64__)) + uint32_t i; + __asm__("bsfl %1, %0" : "=r" (i) : "rm" (n)); + return i; + +#elif defined(_MSC_VER) + unsigned long i; + _BitScanForward(&i, n); + return i; + +#else + uint32_t i = 0; + + if ((n & 0x0000FFFF) == 0) { + n >>= 16; + i = 16; + } + + if ((n & 0x000000FF) == 0) { + n >>= 8; + i += 8; + } + + if ((n & 0x0000000F) == 0) { + n >>= 4; + i += 4; + } + + if ((n & 0x00000003) == 0) { + n >>= 2; + i += 2; + } + + if ((n & 0x00000001) == 0) + ++i; + + return i; +#endif +} + +#define bsf32 ctz32 + +#endif diff --git a/src/common/tuklib_mbstr.h b/src/common/tuklib_mbstr.h new file mode 100644 index 0000000..dde9305 --- /dev/null +++ b/src/common/tuklib_mbstr.h @@ -0,0 +1,66 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_mbstr.h +/// \brief Utility functions for handling multibyte strings +/// +/// If not enough multibyte string support is available in the C library, +/// these functions keep working with the assumption that all strings +/// are in a single-byte character set without combining characters, e.g. +/// US-ASCII or ISO-8859-*. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_MBSTR_H +#define TUKLIB_MBSTR_H + +#include "tuklib_common.h" +TUKLIB_DECLS_BEGIN + +#define tuklib_mbstr_width TUKLIB_SYMBOL(tuklib_mbstr_width) +extern size_t tuklib_mbstr_width(const char *str, size_t *bytes); +///< +/// \brief Get the number of columns needed for the multibyte string +/// +/// This is somewhat similar to wcswidth() but works on multibyte strings. +/// +/// \param str String whose width is to be calculated. If the +/// current locale uses a multibyte character set +/// that has shift states, the string must begin +/// and end in the initial shift state. +/// \param bytes If this is not NULL, *bytes is set to the +/// value returned by strlen(str) (even if an +/// error occurs when calculating the width). +/// +/// \return On success, the number of columns needed to display the +/// string e.g. in a terminal emulator is returned. On error, +/// (size_t)-1 is returned. Possible errors include invalid, +/// partial, or non-printable multibyte character in str, or +/// that str doesn't end in the initial shift state. + +#define tuklib_mbstr_fw TUKLIB_SYMBOL(tuklib_mbstr_fw) +extern int tuklib_mbstr_fw(const char *str, int columns_min); +///< +/// \brief Get the field width for printf() e.g. to align table columns +/// +/// Printing simple tables to a terminal can be done using the field field +/// feature in the printf() format string, but it works only with single-byte +/// character sets. To do the same with multibyte strings, tuklib_mbstr_fw() +/// can be used to calculate appropriate field width. +/// +/// The behavior of this function is undefined, if +/// - str is NULL or not terminated with '\0'; +/// - columns_min <= 0; or +/// - the calculated field width exceeds INT_MAX. +/// +/// \return If tuklib_mbstr_width(str, NULL) fails, -1 is returned. +/// If str needs more columns than columns_min, zero is returned. +/// Otherwise a positive integer is returned, which can be +/// used as the field width, e.g. printf("%*s", fw, str). + +TUKLIB_DECLS_END +#endif diff --git a/src/common/tuklib_mbstr_fw.c b/src/common/tuklib_mbstr_fw.c new file mode 100644 index 0000000..af80dc1 --- /dev/null +++ b/src/common/tuklib_mbstr_fw.c @@ -0,0 +1,31 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_mbstr_fw.c +/// \brief Get the field width for printf() e.g. to align table columns +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "tuklib_mbstr.h" + + +extern int +tuklib_mbstr_fw(const char *str, int columns_min) +{ + size_t len; + const size_t width = tuklib_mbstr_width(str, &len); + if (width == (size_t)-1) + return -1; + + if (width > (size_t)columns_min) + return 0; + + if (width < (size_t)columns_min) + len += (size_t)columns_min - width; + + return len; +} diff --git a/src/common/tuklib_mbstr_width.c b/src/common/tuklib_mbstr_width.c new file mode 100644 index 0000000..69d159e --- /dev/null +++ b/src/common/tuklib_mbstr_width.c @@ -0,0 +1,65 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_mbstr_width.c +/// \brief Calculate width of a multibyte string +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "tuklib_mbstr.h" +#include + +#if defined(HAVE_MBRTOWC) && defined(HAVE_WCWIDTH) +# include +#endif + + +extern size_t +tuklib_mbstr_width(const char *str, size_t *bytes) +{ + const size_t len = strlen(str); + if (bytes != NULL) + *bytes = len; + +#if !(defined(HAVE_MBRTOWC) && defined(HAVE_WCWIDTH)) + // In single-byte mode, the width of the string is the same + // as its length. + return len; + +#else + mbstate_t state; + memset(&state, 0, sizeof(state)); + + size_t width = 0; + size_t i = 0; + + // Convert one multibyte character at a time to wchar_t + // and get its width using wcwidth(). + while (i < len) { + wchar_t wc; + const size_t ret = mbrtowc(&wc, str + i, len - i, &state); + if (ret < 1 || ret > len) + return (size_t)-1; + + i += ret; + + const int wc_width = wcwidth(wc); + if (wc_width < 0) + return (size_t)-1; + + width += (size_t)wc_width; + } + + // Require that the string ends in the initial shift state. + // This way the caller can be combine the string with other + // strings without needing to worry about the shift states. + if (!mbsinit(&state)) + return (size_t)-1; + + return width; +#endif +} diff --git a/src/common/tuklib_open_stdxxx.c b/src/common/tuklib_open_stdxxx.c new file mode 100644 index 0000000..26702a6 --- /dev/null +++ b/src/common/tuklib_open_stdxxx.c @@ -0,0 +1,57 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_open_stdxxx.c +/// \brief Make sure that file descriptors 0, 1, and 2 are open +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "tuklib_open_stdxxx.h" + +#ifndef TUKLIB_DOSLIKE +# include +# include +# include +# include +#endif + + +extern void +tuklib_open_stdxxx(int err_status) +{ +#ifdef TUKLIB_DOSLIKE + // Do nothing, just silence warnings. + (void)err_status; + +#else + for (int i = 0; i <= 2; ++i) { + // We use fcntl() to check if the file descriptor is open. + if (fcntl(i, F_GETFD) == -1 && errno == EBADF) { + // With stdin, we could use /dev/full so that + // writing to stdin would fail. However, /dev/full + // is Linux specific, and if the program tries to + // write to stdin, there's already a problem anyway. + const int fd = open("/dev/null", O_NOCTTY + | (i == 0 ? O_WRONLY : O_RDONLY)); + + if (fd != i) { + if (fd != -1) + (void)close(fd); + + // Something went wrong. Exit with the + // exit status we were given. Don't try + // to print an error message, since stderr + // may very well be non-existent. This + // error should be extremely rare. + exit(err_status); + } + } + } +#endif + + return; +} diff --git a/src/common/tuklib_open_stdxxx.h b/src/common/tuklib_open_stdxxx.h new file mode 100644 index 0000000..b911616 --- /dev/null +++ b/src/common/tuklib_open_stdxxx.h @@ -0,0 +1,23 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_open_stdxxx.h +/// \brief Make sure that file descriptors 0, 1, and 2 are open +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_OPEN_STDXXX_H +#define TUKLIB_OPEN_STDXXX_H + +#include "tuklib_common.h" +TUKLIB_DECLS_BEGIN + +#define tuklib_open_stdxx TUKLIB_SYMBOL(tuklib_open_stdxxx) +extern void tuklib_open_stdxxx(int err_status); + +TUKLIB_DECLS_END +#endif diff --git a/src/common/tuklib_physmem.c b/src/common/tuklib_physmem.c new file mode 100644 index 0000000..a1bccb2 --- /dev/null +++ b/src/common/tuklib_physmem.c @@ -0,0 +1,216 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_physmem.c +/// \brief Get the amount of physical memory +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "tuklib_physmem.h" + +// We want to use Windows-specific code on Cygwin, which also has memory +// information available via sysconf(), but on Cygwin 1.5 and older it +// gives wrong results (from our point of view). +#if defined(_WIN32) || defined(__CYGWIN__) +# ifndef _WIN32_WINNT +# define _WIN32_WINNT 0x0500 +# endif +# include + +#elif defined(__OS2__) +# define INCL_DOSMISC +# include + +#elif defined(__DJGPP__) +# include + +#elif defined(__VMS) +# include +# include +# include + +#elif defined(AMIGA) || defined(__AROS__) +# define __USE_INLINE__ +# include + +#elif defined(__QNX__) +# include +# include + +#elif defined(TUKLIB_PHYSMEM_AIX) +# include + +#elif defined(TUKLIB_PHYSMEM_SYSCONF) +# include + +#elif defined(TUKLIB_PHYSMEM_SYSCTL) +# ifdef HAVE_SYS_PARAM_H +# include +# endif +# include + +// Tru64 +#elif defined(TUKLIB_PHYSMEM_GETSYSINFO) +# include +# include + +// HP-UX +#elif defined(TUKLIB_PHYSMEM_PSTAT_GETSTATIC) +# include +# include + +// IRIX +#elif defined(TUKLIB_PHYSMEM_GETINVENT_R) +# include + +// This sysinfo() is Linux-specific. +#elif defined(TUKLIB_PHYSMEM_SYSINFO) +# include +#endif + + +extern uint64_t +tuklib_physmem(void) +{ + uint64_t ret = 0; + +#if defined(_WIN32) || defined(__CYGWIN__) + if ((GetVersion() & 0xFF) >= 5) { + // Windows 2000 and later have GlobalMemoryStatusEx() which + // supports reporting values greater than 4 GiB. To keep the + // code working also on older Windows versions, use + // GlobalMemoryStatusEx() conditionally. + HMODULE kernel32 = GetModuleHandle(TEXT("kernel32.dll")); + if (kernel32 != NULL) { + typedef BOOL (WINAPI *gmse_type)(LPMEMORYSTATUSEX); + gmse_type gmse = (gmse_type)GetProcAddress( + kernel32, "GlobalMemoryStatusEx"); + if (gmse != NULL) { + MEMORYSTATUSEX meminfo; + meminfo.dwLength = sizeof(meminfo); + if (gmse(&meminfo)) + ret = meminfo.ullTotalPhys; + } + } + } + + if (ret == 0) { + // GlobalMemoryStatus() is supported by Windows 95 and later, + // so it is fine to link against it unconditionally. Note that + // GlobalMemoryStatus() has no return value. + MEMORYSTATUS meminfo; + meminfo.dwLength = sizeof(meminfo); + GlobalMemoryStatus(&meminfo); + ret = meminfo.dwTotalPhys; + } + +#elif defined(__OS2__) + unsigned long mem; + if (DosQuerySysInfo(QSV_TOTPHYSMEM, QSV_TOTPHYSMEM, + &mem, sizeof(mem)) == 0) + ret = mem; + +#elif defined(__DJGPP__) + __dpmi_free_mem_info meminfo; + if (__dpmi_get_free_memory_information(&meminfo) == 0 + && meminfo.total_number_of_physical_pages + != (unsigned long)-1) + ret = (uint64_t)meminfo.total_number_of_physical_pages * 4096; + +#elif defined(__VMS) + int vms_mem; + int val = SYI$_MEMSIZE; + if (LIB$GETSYI(&val, &vms_mem, 0, 0, 0, 0) == SS$_NORMAL) + ret = (uint64_t)vms_mem * 8192; + +#elif defined(AMIGA) || defined(__AROS__) + ret = AvailMem(MEMF_TOTAL); + +#elif defined(__QNX__) + const struct asinfo_entry *entries = SYSPAGE_ENTRY(asinfo); + size_t count = SYSPAGE_ENTRY_SIZE(asinfo) / sizeof(struct asinfo_entry); + const char *strings = SYSPAGE_ENTRY(strings)->data; + + for (size_t i = 0; i < count; ++i) + if (strcmp(strings + entries[i].name, "ram") == 0) + ret += entries[i].end - entries[i].start + 1; + +#elif defined(TUKLIB_PHYSMEM_AIX) + ret = _system_configuration.physmem; + +#elif defined(TUKLIB_PHYSMEM_SYSCONF) + const long pagesize = sysconf(_SC_PAGESIZE); + const long pages = sysconf(_SC_PHYS_PAGES); + if (pagesize != -1 && pages != -1) + // According to docs, pagesize * pages can overflow. + // Simple case is 32-bit box with 4 GiB or more RAM, + // which may report exactly 4 GiB of RAM, and "long" + // being 32-bit will overflow. Casting to uint64_t + // hopefully avoids overflows in the near future. + ret = (uint64_t)pagesize * (uint64_t)pages; + +#elif defined(TUKLIB_PHYSMEM_SYSCTL) + int name[2] = { + CTL_HW, +#ifdef HW_PHYSMEM64 + HW_PHYSMEM64 +#else + HW_PHYSMEM +#endif + }; + union { + uint32_t u32; + uint64_t u64; + } mem; + size_t mem_ptr_size = sizeof(mem.u64); + if (sysctl(name, 2, &mem.u64, &mem_ptr_size, NULL, 0) != -1) { + // IIRC, 64-bit "return value" is possible on some 64-bit + // BSD systems even with HW_PHYSMEM (instead of HW_PHYSMEM64), + // so support both. + if (mem_ptr_size == sizeof(mem.u64)) + ret = mem.u64; + else if (mem_ptr_size == sizeof(mem.u32)) + ret = mem.u32; + } + +#elif defined(TUKLIB_PHYSMEM_GETSYSINFO) + // Docs are unclear if "start" is needed, but it doesn't hurt + // much to have it. + int memkb; + int start = 0; + if (getsysinfo(GSI_PHYSMEM, (caddr_t)&memkb, sizeof(memkb), &start) + != -1) + ret = (uint64_t)memkb * 1024; + +#elif defined(TUKLIB_PHYSMEM_PSTAT_GETSTATIC) + struct pst_static pst; + if (pstat_getstatic(&pst, sizeof(pst), 1, 0) != -1) + ret = (uint64_t)pst.physical_memory * (uint64_t)pst.page_size; + +#elif defined(TUKLIB_PHYSMEM_GETINVENT_R) + inv_state_t *st = NULL; + if (setinvent_r(&st) != -1) { + inventory_t *i; + while ((i = getinvent_r(st)) != NULL) { + if (i->inv_class == INV_MEMORY + && i->inv_type == INV_MAIN_MB) { + ret = (uint64_t)i->inv_state << 20; + break; + } + } + + endinvent_r(st); + } + +#elif defined(TUKLIB_PHYSMEM_SYSINFO) + struct sysinfo si; + if (sysinfo(&si) == 0) + ret = (uint64_t)si.totalram * si.mem_unit; +#endif + + return ret; +} diff --git a/src/common/tuklib_physmem.h b/src/common/tuklib_physmem.h new file mode 100644 index 0000000..09e2a51 --- /dev/null +++ b/src/common/tuklib_physmem.h @@ -0,0 +1,28 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_physmem.h +/// \brief Get the amount of physical memory +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_PHYSMEM_H +#define TUKLIB_PHYSMEM_H + +#include "tuklib_common.h" +TUKLIB_DECLS_BEGIN + +#define tuklib_physmem TUKLIB_SYMBOL(tuklib_physmem) +extern uint64_t tuklib_physmem(void); +///< +/// \brief Get the amount of physical memory in bytes +/// +/// \return Amount of physical memory in bytes. On error, zero is +/// returned. + +TUKLIB_DECLS_END +#endif diff --git a/src/common/tuklib_progname.c b/src/common/tuklib_progname.c new file mode 100644 index 0000000..e2ef4e5 --- /dev/null +++ b/src/common/tuklib_progname.c @@ -0,0 +1,50 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_progname.c +/// \brief Program name to be displayed in messages +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "tuklib_progname.h" +#include + + +#ifndef HAVE_PROGRAM_INVOCATION_NAME +char *progname = NULL; +#endif + + +extern void +tuklib_progname_init(char **argv) +{ +#ifdef TUKLIB_DOSLIKE + // On these systems, argv[0] always has the full path and .exe + // suffix even if the user just types the plain program name. + // We modify argv[0] to make it nicer to read. + + // Strip the leading path. + char *p = argv[0] + strlen(argv[0]); + while (argv[0] < p && p[-1] != '/' && p[-1] != '\\') + --p; + + argv[0] = p; + + // Strip the .exe suffix. + p = strrchr(p, '.'); + if (p != NULL) + *p = '\0'; + + // Make it lowercase. + for (p = argv[0]; *p != '\0'; ++p) + if (*p >= 'A' && *p <= 'Z') + *p = *p - 'A' + 'a'; +#endif + + progname = argv[0]; + return; +} diff --git a/src/common/tuklib_progname.h b/src/common/tuklib_progname.h new file mode 100644 index 0000000..bb80f25 --- /dev/null +++ b/src/common/tuklib_progname.h @@ -0,0 +1,32 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file tuklib_progname.h +/// \brief Program name to be displayed in messages +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef TUKLIB_PROGNAME_H +#define TUKLIB_PROGNAME_H + +#include "tuklib_common.h" +#include + +TUKLIB_DECLS_BEGIN + +#ifdef HAVE_PROGRAM_INVOCATION_NAME +# define progname program_invocation_name +#else +# define progname TUKLIB_SYMBOL(tuklib_progname) + extern char *progname; +#endif + +#define tuklib_progname_init TUKLIB_SYMBOL(tuklib_progname_init) +extern void tuklib_progname_init(char **argv); + +TUKLIB_DECLS_END +#endif diff --git a/src/liblzma/Makefile.am b/src/liblzma/Makefile.am new file mode 100644 index 0000000..fc78e8e --- /dev/null +++ b/src/liblzma/Makefile.am @@ -0,0 +1,126 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +SUBDIRS = api + +EXTRA_DIST = +CLEANFILES = +doc_DATA = + +lib_LTLIBRARIES = liblzma.la +liblzma_la_SOURCES = +liblzma_la_CPPFLAGS = \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_srcdir)/src/liblzma/common \ + -I$(top_srcdir)/src/liblzma/check \ + -I$(top_srcdir)/src/liblzma/lz \ + -I$(top_srcdir)/src/liblzma/rangecoder \ + -I$(top_srcdir)/src/liblzma/lzma \ + -I$(top_srcdir)/src/liblzma/delta \ + -I$(top_srcdir)/src/liblzma/simple \ + -I$(top_srcdir)/src/common \ + -DTUKLIB_SYMBOL_PREFIX=lzma_ +liblzma_la_LDFLAGS = -no-undefined -version-info 9:1:4 + +EXTRA_DIST += liblzma_generic.map liblzma_linux.map validate_map.sh +if COND_SYMVERS_GENERIC +liblzma_la_LDFLAGS += \ + -Wl,--version-script=$(top_srcdir)/src/liblzma/liblzma_generic.map +endif +if COND_SYMVERS_LINUX +liblzma_la_LDFLAGS += \ + -Wl,--version-script=$(top_srcdir)/src/liblzma/liblzma_linux.map +endif + +liblzma_la_SOURCES += ../common/tuklib_physmem.c + +if COND_THREADS +liblzma_la_SOURCES += ../common/tuklib_cpucores.c +endif + +include $(srcdir)/common/Makefile.inc +include $(srcdir)/check/Makefile.inc + +if COND_FILTER_LZ +include $(srcdir)/lz/Makefile.inc +endif + +if COND_FILTER_LZMA1 +include $(srcdir)/lzma/Makefile.inc +include $(srcdir)/rangecoder/Makefile.inc +endif + +if COND_FILTER_DELTA +include $(srcdir)/delta/Makefile.inc +endif + +if COND_FILTER_SIMPLE +include $(srcdir)/simple/Makefile.inc +endif + + +## Windows-specific stuff + +# Windows resource compiler support. libtool knows what to do with .rc +# files, but Automake (<= 1.11 at least) doesn't know. +# +# We want the resource file only in shared liblzma. To avoid linking it into +# static liblzma, we overwrite the static object file with an object file +# compiled from empty input. Note that GNU-specific features are OK here, +# because on Windows we are compiled with the GNU toolchain. +.rc.lo: + $(LIBTOOL) --mode=compile $(RC) $(DEFS) $(DEFAULT_INCLUDES) \ + $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) \ + -i $< -o $@ + echo > empty.c + $(COMPILE) -c empty.c -o $(*D)/$(*F).o + +# Remove ordinals from the generated .def file. People must link by name, +# not by ordinal, because no one is going to track the ordinal numbers. +liblzma.def: liblzma.la liblzma.def.in + sed 's/ \+@ *[0-9]\+//' liblzma.def.in > liblzma.def + +# Creating liblzma.def.in is a side effect of linking the library. +liblzma.def.in: liblzma.la + +if COND_W32 +CLEANFILES += liblzma.def liblzma.def.in empty.c +liblzma_la_SOURCES += liblzma_w32res.rc +liblzma_la_LDFLAGS += -Xlinker --output-def -Xlinker liblzma.def.in + +## liblzma.def.in is created only when building shared liblzma, so don't +## try to create liblzma.def when not building shared liblzma. +if COND_SHARED +doc_DATA += liblzma.def +endif +endif + + +## pkg-config +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = liblzma.pc +EXTRA_DIST += liblzma.pc.in + +pc_verbose = $(pc_verbose_@AM_V@) +pc_verbose_ = $(pc_verbose_@AM_DEFAULT_V@) +pc_verbose_0 = @echo " PC " $@; + +liblzma.pc: $(srcdir)/liblzma.pc.in + $(AM_V_at)rm -f $@ + $(pc_verbose)sed \ + -e 's,@prefix[@],$(prefix),g' \ + -e 's,@exec_prefix[@],$(exec_prefix),g' \ + -e 's,@libdir[@],$(libdir),g' \ + -e 's,@includedir[@],$(includedir),g' \ + -e 's,@PACKAGE_URL[@],$(PACKAGE_URL),g' \ + -e 's,@PACKAGE_VERSION[@],$(PACKAGE_VERSION),g' \ + -e 's,@PTHREAD_CFLAGS[@],$(PTHREAD_CFLAGS),g' \ + -e 's,@LIBS[@],$(LIBS),g' \ + < $(srcdir)/liblzma.pc.in > $@ || { rm -f $@; exit 1; } + +clean-local: + rm -f liblzma.pc diff --git a/src/liblzma/Makefile.in b/src/liblzma/Makefile.in new file mode 100644 index 0000000..8bdd1d8 --- /dev/null +++ b/src/liblzma/Makefile.in @@ -0,0 +1,2230 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@COND_SYMVERS_GENERIC_TRUE@am__append_1 = \ +@COND_SYMVERS_GENERIC_TRUE@ -Wl,--version-script=$(top_srcdir)/src/liblzma/liblzma_generic.map + +@COND_SYMVERS_LINUX_TRUE@am__append_2 = \ +@COND_SYMVERS_LINUX_TRUE@ -Wl,--version-script=$(top_srcdir)/src/liblzma/liblzma_linux.map + +@COND_THREADS_TRUE@am__append_3 = ../common/tuklib_cpucores.c +@COND_THREADS_TRUE@am__append_4 = \ +@COND_THREADS_TRUE@ common/hardware_cputhreads.c \ +@COND_THREADS_TRUE@ common/outqueue.c \ +@COND_THREADS_TRUE@ common/outqueue.h + +@COND_MAIN_ENCODER_TRUE@am__append_5 = \ +@COND_MAIN_ENCODER_TRUE@ common/alone_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/block_buffer_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/block_buffer_encoder.h \ +@COND_MAIN_ENCODER_TRUE@ common/block_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/block_encoder.h \ +@COND_MAIN_ENCODER_TRUE@ common/block_header_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/easy_buffer_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/easy_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/easy_encoder_memusage.c \ +@COND_MAIN_ENCODER_TRUE@ common/filter_buffer_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/filter_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/filter_encoder.h \ +@COND_MAIN_ENCODER_TRUE@ common/filter_flags_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/index_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/index_encoder.h \ +@COND_MAIN_ENCODER_TRUE@ common/stream_buffer_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/stream_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/stream_flags_encoder.c \ +@COND_MAIN_ENCODER_TRUE@ common/vli_encoder.c + +@COND_MAIN_ENCODER_TRUE@@COND_THREADS_TRUE@am__append_6 = \ +@COND_MAIN_ENCODER_TRUE@@COND_THREADS_TRUE@ common/stream_encoder_mt.c + +@COND_MAIN_ENCODER_TRUE@@COND_MICROLZMA_TRUE@am__append_7 = \ +@COND_MAIN_ENCODER_TRUE@@COND_MICROLZMA_TRUE@ common/microlzma_encoder.c + +@COND_MAIN_DECODER_TRUE@am__append_8 = \ +@COND_MAIN_DECODER_TRUE@ common/alone_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/alone_decoder.h \ +@COND_MAIN_DECODER_TRUE@ common/auto_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/block_buffer_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/block_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/block_decoder.h \ +@COND_MAIN_DECODER_TRUE@ common/block_header_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/easy_decoder_memusage.c \ +@COND_MAIN_DECODER_TRUE@ common/file_info.c \ +@COND_MAIN_DECODER_TRUE@ common/filter_buffer_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/filter_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/filter_decoder.h \ +@COND_MAIN_DECODER_TRUE@ common/filter_flags_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/index_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/index_decoder.h \ +@COND_MAIN_DECODER_TRUE@ common/index_hash.c \ +@COND_MAIN_DECODER_TRUE@ common/stream_buffer_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/stream_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/stream_decoder.h \ +@COND_MAIN_DECODER_TRUE@ common/stream_flags_decoder.c \ +@COND_MAIN_DECODER_TRUE@ common/vli_decoder.c + +@COND_MAIN_DECODER_TRUE@@COND_THREADS_TRUE@am__append_9 = \ +@COND_MAIN_DECODER_TRUE@@COND_THREADS_TRUE@ common/stream_decoder_mt.c + +@COND_MAIN_DECODER_TRUE@@COND_MICROLZMA_TRUE@am__append_10 = \ +@COND_MAIN_DECODER_TRUE@@COND_MICROLZMA_TRUE@ common/microlzma_decoder.c + +@COND_LZIP_DECODER_TRUE@@COND_MAIN_DECODER_TRUE@am__append_11 = \ +@COND_LZIP_DECODER_TRUE@@COND_MAIN_DECODER_TRUE@ common/lzip_decoder.c \ +@COND_LZIP_DECODER_TRUE@@COND_MAIN_DECODER_TRUE@ common/lzip_decoder.h + +@COND_CHECK_CRC32_TRUE@@COND_SMALL_TRUE@am__append_12 = check/crc32_small.c +@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_13 = \ +@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@ check/crc32_table.c \ +@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@ check/crc32_table_le.h \ +@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@ check/crc32_table_be.h + +@COND_ASM_X86_TRUE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_14 = check/crc32_x86.S +@COND_ASM_X86_FALSE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__append_15 = check/crc32_fast.c +@COND_CHECK_CRC64_TRUE@@COND_SMALL_TRUE@am__append_16 = check/crc64_small.c +@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_17 = \ +@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@ check/crc64_table.c \ +@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@ check/crc64_table_le.h \ +@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@ check/crc64_table_be.h + +@COND_ASM_X86_TRUE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_18 = check/crc64_x86.S +@COND_ASM_X86_FALSE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__append_19 = check/crc64_fast.c +@COND_CHECK_SHA256_TRUE@@COND_INTERNAL_SHA256_TRUE@am__append_20 = check/sha256.c +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__append_21 = \ +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder.c \ +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder.h \ +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder_hash.h \ +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder_hash_table.h \ +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_encoder_mf.c + +@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__append_22 = \ +@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_decoder.c \ +@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ lz/lz_decoder.h + +@COND_FILTER_LZMA1_TRUE@am__append_23 = lzma/fastpos_tablegen.c \ +@COND_FILTER_LZMA1_TRUE@ rangecoder/price_tablegen.c +@COND_FILTER_LZMA1_TRUE@am__append_24 = lzma/lzma_common.h \ +@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_presets.c +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_25 = \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/fastpos.h \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder.h \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder.c \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_private.h \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_optimum_fast.c \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_encoder_optimum_normal.c + +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@@COND_SMALL_FALSE@am__append_26 = lzma/fastpos_table.c +@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_27 = \ +@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_decoder.c \ +@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma_decoder.h + +@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_28 = \ +@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_encoder.c \ +@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_encoder.h + +@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_29 = \ +@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_decoder.c \ +@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@ lzma/lzma2_decoder.h + +@COND_FILTER_LZMA1_TRUE@am__append_30 = rangecoder/range_common.h +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_31 = \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ rangecoder/range_encoder.h \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ rangecoder/price.h \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ rangecoder/price_table.c + +@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__append_32 = rangecoder/range_decoder.h +@COND_FILTER_DELTA_TRUE@am__append_33 = \ +@COND_FILTER_DELTA_TRUE@ delta/delta_common.c \ +@COND_FILTER_DELTA_TRUE@ delta/delta_common.h \ +@COND_FILTER_DELTA_TRUE@ delta/delta_private.h + +@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__append_34 = \ +@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_encoder.c \ +@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_encoder.h + +@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__append_35 = \ +@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_decoder.c \ +@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@ delta/delta_decoder.h + +@COND_FILTER_SIMPLE_TRUE@am__append_36 = \ +@COND_FILTER_SIMPLE_TRUE@ simple/simple_coder.c \ +@COND_FILTER_SIMPLE_TRUE@ simple/simple_coder.h \ +@COND_FILTER_SIMPLE_TRUE@ simple/simple_private.h + +@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_37 = \ +@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_encoder.c \ +@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_encoder.h + +@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_38 = \ +@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_decoder.c \ +@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@ simple/simple_decoder.h + +@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_X86_TRUE@am__append_39 = simple/x86.c +@COND_FILTER_POWERPC_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_40 = simple/powerpc.c +@COND_FILTER_IA64_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_41 = simple/ia64.c +@COND_FILTER_ARM_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_42 = simple/arm.c +@COND_FILTER_ARMTHUMB_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_43 = simple/armthumb.c +@COND_FILTER_ARM64_TRUE@@COND_FILTER_SIMPLE_TRUE@am__append_44 = simple/arm64.c +@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_SPARC_TRUE@am__append_45 = simple/sparc.c +@COND_W32_TRUE@am__append_46 = liblzma.def liblzma.def.in empty.c +@COND_W32_TRUE@am__append_47 = liblzma_w32res.rc +@COND_W32_TRUE@am__append_48 = -Xlinker --output-def -Xlinker liblzma.def.in +@COND_SHARED_TRUE@@COND_W32_TRUE@am__append_49 = liblzma.def +subdir = src/liblzma +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_capsicum.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/getopt.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/posix-shell.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/tuklib_common.m4 \ + $(top_srcdir)/m4/tuklib_cpucores.m4 \ + $(top_srcdir)/m4/tuklib_integer.m4 \ + $(top_srcdir)/m4/tuklib_mbstr.m4 \ + $(top_srcdir)/m4/tuklib_physmem.m4 \ + $(top_srcdir)/m4/tuklib_progname.m4 \ + $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" \ + "$(DESTDIR)$(pkgconfigdir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +liblzma_la_LIBADD = +am__liblzma_la_SOURCES_DIST = ../common/tuklib_physmem.c \ + ../common/tuklib_cpucores.c common/common.c common/common.h \ + common/memcmplen.h common/block_util.c common/easy_preset.c \ + common/easy_preset.h common/filter_common.c \ + common/filter_common.h common/hardware_physmem.c \ + common/index.c common/index.h common/stream_flags_common.c \ + common/stream_flags_common.h common/string_conversion.c \ + common/vli_size.c common/hardware_cputhreads.c \ + common/outqueue.c common/outqueue.h common/alone_encoder.c \ + common/block_buffer_encoder.c common/block_buffer_encoder.h \ + common/block_encoder.c common/block_encoder.h \ + common/block_header_encoder.c common/easy_buffer_encoder.c \ + common/easy_encoder.c common/easy_encoder_memusage.c \ + common/filter_buffer_encoder.c common/filter_encoder.c \ + common/filter_encoder.h common/filter_flags_encoder.c \ + common/index_encoder.c common/index_encoder.h \ + common/stream_buffer_encoder.c common/stream_encoder.c \ + common/stream_flags_encoder.c common/vli_encoder.c \ + common/stream_encoder_mt.c common/microlzma_encoder.c \ + common/alone_decoder.c common/alone_decoder.h \ + common/auto_decoder.c common/block_buffer_decoder.c \ + common/block_decoder.c common/block_decoder.h \ + common/block_header_decoder.c common/easy_decoder_memusage.c \ + common/file_info.c common/filter_buffer_decoder.c \ + common/filter_decoder.c common/filter_decoder.h \ + common/filter_flags_decoder.c common/index_decoder.c \ + common/index_decoder.h common/index_hash.c \ + common/stream_buffer_decoder.c common/stream_decoder.c \ + common/stream_decoder.h common/stream_flags_decoder.c \ + common/vli_decoder.c common/stream_decoder_mt.c \ + common/microlzma_decoder.c common/lzip_decoder.c \ + common/lzip_decoder.h check/check.c check/check.h \ + check/crc_macros.h check/crc32_small.c check/crc32_table.c \ + check/crc32_table_le.h check/crc32_table_be.h \ + check/crc32_x86.S check/crc32_fast.c check/crc64_small.c \ + check/crc64_table.c check/crc64_table_le.h \ + check/crc64_table_be.h check/crc64_x86.S check/crc64_fast.c \ + check/sha256.c lz/lz_encoder.c lz/lz_encoder.h \ + lz/lz_encoder_hash.h lz/lz_encoder_hash_table.h \ + lz/lz_encoder_mf.c lz/lz_decoder.c lz/lz_decoder.h \ + lzma/lzma_common.h lzma/lzma_encoder_presets.c lzma/fastpos.h \ + lzma/lzma_encoder.h lzma/lzma_encoder.c \ + lzma/lzma_encoder_private.h lzma/lzma_encoder_optimum_fast.c \ + lzma/lzma_encoder_optimum_normal.c lzma/fastpos_table.c \ + lzma/lzma_decoder.c lzma/lzma_decoder.h lzma/lzma2_encoder.c \ + lzma/lzma2_encoder.h lzma/lzma2_decoder.c lzma/lzma2_decoder.h \ + rangecoder/range_common.h rangecoder/range_encoder.h \ + rangecoder/price.h rangecoder/price_table.c \ + rangecoder/range_decoder.h delta/delta_common.c \ + delta/delta_common.h delta/delta_private.h \ + delta/delta_encoder.c delta/delta_encoder.h \ + delta/delta_decoder.c delta/delta_decoder.h \ + simple/simple_coder.c simple/simple_coder.h \ + simple/simple_private.h simple/simple_encoder.c \ + simple/simple_encoder.h simple/simple_decoder.c \ + simple/simple_decoder.h simple/x86.c simple/powerpc.c \ + simple/ia64.c simple/arm.c simple/armthumb.c simple/arm64.c \ + simple/sparc.c liblzma_w32res.rc +@COND_THREADS_TRUE@am__objects_1 = liblzma_la-tuklib_cpucores.lo +@COND_THREADS_TRUE@am__objects_2 = liblzma_la-hardware_cputhreads.lo \ +@COND_THREADS_TRUE@ liblzma_la-outqueue.lo +@COND_MAIN_ENCODER_TRUE@am__objects_3 = liblzma_la-alone_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-block_buffer_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-block_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-block_header_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-easy_buffer_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-easy_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-easy_encoder_memusage.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-filter_buffer_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-filter_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-filter_flags_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-index_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-stream_buffer_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-stream_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-stream_flags_encoder.lo \ +@COND_MAIN_ENCODER_TRUE@ liblzma_la-vli_encoder.lo +@COND_MAIN_ENCODER_TRUE@@COND_THREADS_TRUE@am__objects_4 = liblzma_la-stream_encoder_mt.lo +@COND_MAIN_ENCODER_TRUE@@COND_MICROLZMA_TRUE@am__objects_5 = liblzma_la-microlzma_encoder.lo +@COND_MAIN_DECODER_TRUE@am__objects_6 = liblzma_la-alone_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-auto_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-block_buffer_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-block_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-block_header_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-easy_decoder_memusage.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-file_info.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-filter_buffer_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-filter_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-filter_flags_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-index_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-index_hash.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-stream_buffer_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-stream_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-stream_flags_decoder.lo \ +@COND_MAIN_DECODER_TRUE@ liblzma_la-vli_decoder.lo +@COND_MAIN_DECODER_TRUE@@COND_THREADS_TRUE@am__objects_7 = liblzma_la-stream_decoder_mt.lo +@COND_MAIN_DECODER_TRUE@@COND_MICROLZMA_TRUE@am__objects_8 = liblzma_la-microlzma_decoder.lo +@COND_LZIP_DECODER_TRUE@@COND_MAIN_DECODER_TRUE@am__objects_9 = liblzma_la-lzip_decoder.lo +@COND_CHECK_CRC32_TRUE@@COND_SMALL_TRUE@am__objects_10 = liblzma_la-crc32_small.lo +@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_11 = liblzma_la-crc32_table.lo +@COND_ASM_X86_TRUE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_12 = liblzma_la-crc32_x86.lo +@COND_ASM_X86_FALSE@@COND_CHECK_CRC32_TRUE@@COND_SMALL_FALSE@am__objects_13 = liblzma_la-crc32_fast.lo +@COND_CHECK_CRC64_TRUE@@COND_SMALL_TRUE@am__objects_14 = liblzma_la-crc64_small.lo +@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_15 = liblzma_la-crc64_table.lo +@COND_ASM_X86_TRUE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_16 = liblzma_la-crc64_x86.lo +@COND_ASM_X86_FALSE@@COND_CHECK_CRC64_TRUE@@COND_SMALL_FALSE@am__objects_17 = liblzma_la-crc64_fast.lo +@COND_CHECK_SHA256_TRUE@@COND_INTERNAL_SHA256_TRUE@am__objects_18 = liblzma_la-sha256.lo +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__objects_19 = liblzma_la-lz_encoder.lo \ +@COND_ENCODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@ liblzma_la-lz_encoder_mf.lo +@COND_DECODER_LZ_TRUE@@COND_FILTER_LZ_TRUE@am__objects_20 = liblzma_la-lz_decoder.lo +@COND_FILTER_LZMA1_TRUE@am__objects_21 = \ +@COND_FILTER_LZMA1_TRUE@ liblzma_la-lzma_encoder_presets.lo +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_22 = liblzma_la-lzma_encoder.lo \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ liblzma_la-lzma_encoder_optimum_fast.lo \ +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@ liblzma_la-lzma_encoder_optimum_normal.lo +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@@COND_SMALL_FALSE@am__objects_23 = liblzma_la-fastpos_table.lo +@COND_DECODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_24 = liblzma_la-lzma_decoder.lo +@COND_ENCODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_25 = liblzma_la-lzma2_encoder.lo +@COND_DECODER_LZMA2_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_26 = liblzma_la-lzma2_decoder.lo +am__objects_27 = +@COND_ENCODER_LZMA1_TRUE@@COND_FILTER_LZMA1_TRUE@am__objects_28 = liblzma_la-price_table.lo +@COND_FILTER_DELTA_TRUE@am__objects_29 = liblzma_la-delta_common.lo +@COND_ENCODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__objects_30 = liblzma_la-delta_encoder.lo +@COND_DECODER_DELTA_TRUE@@COND_FILTER_DELTA_TRUE@am__objects_31 = liblzma_la-delta_decoder.lo +@COND_FILTER_SIMPLE_TRUE@am__objects_32 = liblzma_la-simple_coder.lo +@COND_ENCODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_33 = liblzma_la-simple_encoder.lo +@COND_DECODER_SIMPLE_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_34 = liblzma_la-simple_decoder.lo +@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_X86_TRUE@am__objects_35 = liblzma_la-x86.lo +@COND_FILTER_POWERPC_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_36 = liblzma_la-powerpc.lo +@COND_FILTER_IA64_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_37 = liblzma_la-ia64.lo +@COND_FILTER_ARM_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_38 = liblzma_la-arm.lo +@COND_FILTER_ARMTHUMB_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_39 = liblzma_la-armthumb.lo +@COND_FILTER_ARM64_TRUE@@COND_FILTER_SIMPLE_TRUE@am__objects_40 = liblzma_la-arm64.lo +@COND_FILTER_SIMPLE_TRUE@@COND_FILTER_SPARC_TRUE@am__objects_41 = liblzma_la-sparc.lo +@COND_W32_TRUE@am__objects_42 = liblzma_w32res.lo +am_liblzma_la_OBJECTS = liblzma_la-tuklib_physmem.lo $(am__objects_1) \ + liblzma_la-common.lo liblzma_la-block_util.lo \ + liblzma_la-easy_preset.lo liblzma_la-filter_common.lo \ + liblzma_la-hardware_physmem.lo liblzma_la-index.lo \ + liblzma_la-stream_flags_common.lo \ + liblzma_la-string_conversion.lo liblzma_la-vli_size.lo \ + $(am__objects_2) $(am__objects_3) $(am__objects_4) \ + $(am__objects_5) $(am__objects_6) $(am__objects_7) \ + $(am__objects_8) $(am__objects_9) liblzma_la-check.lo \ + $(am__objects_10) $(am__objects_11) $(am__objects_12) \ + $(am__objects_13) $(am__objects_14) $(am__objects_15) \ + $(am__objects_16) $(am__objects_17) $(am__objects_18) \ + $(am__objects_19) $(am__objects_20) $(am__objects_21) \ + $(am__objects_22) $(am__objects_23) $(am__objects_24) \ + $(am__objects_25) $(am__objects_26) $(am__objects_27) \ + $(am__objects_28) $(am__objects_27) $(am__objects_29) \ + $(am__objects_30) $(am__objects_31) $(am__objects_32) \ + $(am__objects_33) $(am__objects_34) $(am__objects_35) \ + $(am__objects_36) $(am__objects_37) $(am__objects_38) \ + $(am__objects_39) $(am__objects_40) $(am__objects_41) \ + $(am__objects_42) +liblzma_la_OBJECTS = $(am_liblzma_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +liblzma_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(liblzma_la_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/liblzma_la-alone_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-alone_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-arm.Plo \ + ./$(DEPDIR)/liblzma_la-arm64.Plo \ + ./$(DEPDIR)/liblzma_la-armthumb.Plo \ + ./$(DEPDIR)/liblzma_la-auto_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-block_buffer_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-block_buffer_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-block_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-block_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-block_header_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-block_header_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-block_util.Plo \ + ./$(DEPDIR)/liblzma_la-check.Plo \ + ./$(DEPDIR)/liblzma_la-common.Plo \ + ./$(DEPDIR)/liblzma_la-crc32_fast.Plo \ + ./$(DEPDIR)/liblzma_la-crc32_small.Plo \ + ./$(DEPDIR)/liblzma_la-crc32_table.Plo \ + ./$(DEPDIR)/liblzma_la-crc32_x86.Plo \ + ./$(DEPDIR)/liblzma_la-crc64_fast.Plo \ + ./$(DEPDIR)/liblzma_la-crc64_small.Plo \ + ./$(DEPDIR)/liblzma_la-crc64_table.Plo \ + ./$(DEPDIR)/liblzma_la-crc64_x86.Plo \ + ./$(DEPDIR)/liblzma_la-delta_common.Plo \ + ./$(DEPDIR)/liblzma_la-delta_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-delta_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-easy_buffer_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-easy_decoder_memusage.Plo \ + ./$(DEPDIR)/liblzma_la-easy_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-easy_encoder_memusage.Plo \ + ./$(DEPDIR)/liblzma_la-easy_preset.Plo \ + ./$(DEPDIR)/liblzma_la-fastpos_table.Plo \ + ./$(DEPDIR)/liblzma_la-file_info.Plo \ + ./$(DEPDIR)/liblzma_la-filter_buffer_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-filter_buffer_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-filter_common.Plo \ + ./$(DEPDIR)/liblzma_la-filter_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-filter_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-filter_flags_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-filter_flags_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-hardware_cputhreads.Plo \ + ./$(DEPDIR)/liblzma_la-hardware_physmem.Plo \ + ./$(DEPDIR)/liblzma_la-ia64.Plo \ + ./$(DEPDIR)/liblzma_la-index.Plo \ + ./$(DEPDIR)/liblzma_la-index_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-index_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-index_hash.Plo \ + ./$(DEPDIR)/liblzma_la-lz_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-lz_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-lz_encoder_mf.Plo \ + ./$(DEPDIR)/liblzma_la-lzip_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-lzma2_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-lzma2_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-lzma_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-lzma_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Plo \ + ./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Plo \ + ./$(DEPDIR)/liblzma_la-lzma_encoder_presets.Plo \ + ./$(DEPDIR)/liblzma_la-microlzma_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-microlzma_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-outqueue.Plo \ + ./$(DEPDIR)/liblzma_la-powerpc.Plo \ + ./$(DEPDIR)/liblzma_la-price_table.Plo \ + ./$(DEPDIR)/liblzma_la-sha256.Plo \ + ./$(DEPDIR)/liblzma_la-simple_coder.Plo \ + ./$(DEPDIR)/liblzma_la-simple_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-simple_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-sparc.Plo \ + ./$(DEPDIR)/liblzma_la-stream_buffer_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-stream_buffer_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-stream_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-stream_decoder_mt.Plo \ + ./$(DEPDIR)/liblzma_la-stream_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-stream_encoder_mt.Plo \ + ./$(DEPDIR)/liblzma_la-stream_flags_common.Plo \ + ./$(DEPDIR)/liblzma_la-stream_flags_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-stream_flags_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-string_conversion.Plo \ + ./$(DEPDIR)/liblzma_la-tuklib_cpucores.Plo \ + ./$(DEPDIR)/liblzma_la-tuklib_physmem.Plo \ + ./$(DEPDIR)/liblzma_la-vli_decoder.Plo \ + ./$(DEPDIR)/liblzma_la-vli_encoder.Plo \ + ./$(DEPDIR)/liblzma_la-vli_size.Plo \ + ./$(DEPDIR)/liblzma_la-x86.Plo +am__mv = mv -f +CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) +LTCPPASCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CCASFLAGS) $(CCASFLAGS) +AM_V_CPPAS = $(am__v_CPPAS_@AM_V@) +am__v_CPPAS_ = $(am__v_CPPAS_@AM_DEFAULT_V@) +am__v_CPPAS_0 = @echo " CPPAS " $@; +am__v_CPPAS_1 = +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(liblzma_la_SOURCES) +DIST_SOURCES = $(am__liblzma_la_SOURCES_DIST) +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +DATA = $(doc_DATA) $(pkgconfig_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir distdir-am +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/check/Makefile.inc \ + $(srcdir)/common/Makefile.inc $(srcdir)/delta/Makefile.inc \ + $(srcdir)/lz/Makefile.inc $(srcdir)/lzma/Makefile.inc \ + $(srcdir)/rangecoder/Makefile.inc \ + $(srcdir)/simple/Makefile.inc $(top_srcdir)/build-aux/depcomp +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAPSICUM_LIB = @CAPSICUM_LIB@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +GETOPT_H = @GETOPT_H@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +HAVE_VISIBILITY = @HAVE_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_EXEEXT = @LN_EXEEXT@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ +POSUB = @POSUB@ +PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +enable_path_for_scripts = @enable_path_for_scripts@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xz = @xz@ +SUBDIRS = api +EXTRA_DIST = liblzma_generic.map liblzma_linux.map validate_map.sh \ + check/crc32_tablegen.c check/crc64_tablegen.c $(am__append_23) \ + liblzma.pc.in +CLEANFILES = $(am__append_46) +doc_DATA = $(am__append_49) +lib_LTLIBRARIES = liblzma.la +liblzma_la_SOURCES = ../common/tuklib_physmem.c $(am__append_3) \ + common/common.c common/common.h common/memcmplen.h \ + common/block_util.c common/easy_preset.c common/easy_preset.h \ + common/filter_common.c common/filter_common.h \ + common/hardware_physmem.c common/index.c common/index.h \ + common/stream_flags_common.c common/stream_flags_common.h \ + common/string_conversion.c common/vli_size.c $(am__append_4) \ + $(am__append_5) $(am__append_6) $(am__append_7) \ + $(am__append_8) $(am__append_9) $(am__append_10) \ + $(am__append_11) check/check.c check/check.h \ + check/crc_macros.h $(am__append_12) $(am__append_13) \ + $(am__append_14) $(am__append_15) $(am__append_16) \ + $(am__append_17) $(am__append_18) $(am__append_19) \ + $(am__append_20) $(am__append_21) $(am__append_22) \ + $(am__append_24) $(am__append_25) $(am__append_26) \ + $(am__append_27) $(am__append_28) $(am__append_29) \ + $(am__append_30) $(am__append_31) $(am__append_32) \ + $(am__append_33) $(am__append_34) $(am__append_35) \ + $(am__append_36) $(am__append_37) $(am__append_38) \ + $(am__append_39) $(am__append_40) $(am__append_41) \ + $(am__append_42) $(am__append_43) $(am__append_44) \ + $(am__append_45) $(am__append_47) +liblzma_la_CPPFLAGS = \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_srcdir)/src/liblzma/common \ + -I$(top_srcdir)/src/liblzma/check \ + -I$(top_srcdir)/src/liblzma/lz \ + -I$(top_srcdir)/src/liblzma/rangecoder \ + -I$(top_srcdir)/src/liblzma/lzma \ + -I$(top_srcdir)/src/liblzma/delta \ + -I$(top_srcdir)/src/liblzma/simple \ + -I$(top_srcdir)/src/common \ + -DTUKLIB_SYMBOL_PREFIX=lzma_ + +liblzma_la_LDFLAGS = -no-undefined -version-info 9:1:4 $(am__append_1) \ + $(am__append_2) $(am__append_48) +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = liblzma.pc +pc_verbose = $(pc_verbose_@AM_V@) +pc_verbose_ = $(pc_verbose_@AM_DEFAULT_V@) +pc_verbose_0 = @echo " PC " $@; +all: all-recursive + +.SUFFIXES: +.SUFFIXES: .S .c .lo .o .obj .rc +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/common/Makefile.inc $(srcdir)/check/Makefile.inc $(srcdir)/lz/Makefile.inc $(srcdir)/lzma/Makefile.inc $(srcdir)/rangecoder/Makefile.inc $(srcdir)/delta/Makefile.inc $(srcdir)/simple/Makefile.inc $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign src/liblzma/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; +$(srcdir)/common/Makefile.inc $(srcdir)/check/Makefile.inc $(srcdir)/lz/Makefile.inc $(srcdir)/lzma/Makefile.inc $(srcdir)/rangecoder/Makefile.inc $(srcdir)/delta/Makefile.inc $(srcdir)/simple/Makefile.inc $(am__empty): + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } + +liblzma.la: $(liblzma_la_OBJECTS) $(liblzma_la_DEPENDENCIES) $(EXTRA_liblzma_la_DEPENDENCIES) + $(AM_V_CCLD)$(liblzma_la_LINK) -rpath $(libdir) $(liblzma_la_OBJECTS) $(liblzma_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-alone_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-alone_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-arm.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-arm64.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-armthumb.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-auto_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_buffer_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_buffer_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_header_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_header_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-block_util.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-check.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-common.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_fast.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_small.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_table.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc32_x86.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_fast.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_small.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_table.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-crc64_x86.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-delta_common.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-delta_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-delta_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_buffer_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_decoder_memusage.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_encoder_memusage.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-easy_preset.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-fastpos_table.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-file_info.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_buffer_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_buffer_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_common.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_flags_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-filter_flags_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-hardware_cputhreads.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-hardware_physmem.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-ia64.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-index_hash.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lz_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lz_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lz_encoder_mf.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzip_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma2_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma2_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-lzma_encoder_presets.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-microlzma_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-microlzma_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-outqueue.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-powerpc.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-price_table.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-sha256.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-simple_coder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-simple_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-simple_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-sparc.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_buffer_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_buffer_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_decoder_mt.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_encoder_mt.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_flags_common.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_flags_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-stream_flags_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-string_conversion.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-tuklib_cpucores.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-tuklib_physmem.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-vli_decoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-vli_encoder.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-vli_size.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblzma_la-x86.Plo@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) + +.S.o: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ $< + +.S.obj: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.S.lo: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LTCPPASCOMPILE) -c -o $@ $< + +liblzma_la-crc32_x86.lo: check/crc32_x86.S +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -MT liblzma_la-crc32_x86.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_x86.Tpo -c -o liblzma_la-crc32_x86.lo `test -f 'check/crc32_x86.S' || echo '$(srcdir)/'`check/crc32_x86.S +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc32_x86.Tpo $(DEPDIR)/liblzma_la-crc32_x86.Plo +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='check/crc32_x86.S' object='liblzma_la-crc32_x86.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -c -o liblzma_la-crc32_x86.lo `test -f 'check/crc32_x86.S' || echo '$(srcdir)/'`check/crc32_x86.S + +liblzma_la-crc64_x86.lo: check/crc64_x86.S +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -MT liblzma_la-crc64_x86.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_x86.Tpo -c -o liblzma_la-crc64_x86.lo `test -f 'check/crc64_x86.S' || echo '$(srcdir)/'`check/crc64_x86.S +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc64_x86.Tpo $(DEPDIR)/liblzma_la-crc64_x86.Plo +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='check/crc64_x86.S' object='liblzma_la-crc64_x86.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -c -o liblzma_la-crc64_x86.lo `test -f 'check/crc64_x86.S' || echo '$(srcdir)/'`check/crc64_x86.S + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +liblzma_la-tuklib_physmem.lo: ../common/tuklib_physmem.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-tuklib_physmem.lo -MD -MP -MF $(DEPDIR)/liblzma_la-tuklib_physmem.Tpo -c -o liblzma_la-tuklib_physmem.lo `test -f '../common/tuklib_physmem.c' || echo '$(srcdir)/'`../common/tuklib_physmem.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-tuklib_physmem.Tpo $(DEPDIR)/liblzma_la-tuklib_physmem.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_physmem.c' object='liblzma_la-tuklib_physmem.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-tuklib_physmem.lo `test -f '../common/tuklib_physmem.c' || echo '$(srcdir)/'`../common/tuklib_physmem.c + +liblzma_la-tuklib_cpucores.lo: ../common/tuklib_cpucores.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-tuklib_cpucores.lo -MD -MP -MF $(DEPDIR)/liblzma_la-tuklib_cpucores.Tpo -c -o liblzma_la-tuklib_cpucores.lo `test -f '../common/tuklib_cpucores.c' || echo '$(srcdir)/'`../common/tuklib_cpucores.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-tuklib_cpucores.Tpo $(DEPDIR)/liblzma_la-tuklib_cpucores.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_cpucores.c' object='liblzma_la-tuklib_cpucores.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-tuklib_cpucores.lo `test -f '../common/tuklib_cpucores.c' || echo '$(srcdir)/'`../common/tuklib_cpucores.c + +liblzma_la-common.lo: common/common.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-common.Tpo -c -o liblzma_la-common.lo `test -f 'common/common.c' || echo '$(srcdir)/'`common/common.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-common.Tpo $(DEPDIR)/liblzma_la-common.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/common.c' object='liblzma_la-common.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-common.lo `test -f 'common/common.c' || echo '$(srcdir)/'`common/common.c + +liblzma_la-block_util.lo: common/block_util.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_util.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_util.Tpo -c -o liblzma_la-block_util.lo `test -f 'common/block_util.c' || echo '$(srcdir)/'`common/block_util.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-block_util.Tpo $(DEPDIR)/liblzma_la-block_util.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/block_util.c' object='liblzma_la-block_util.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_util.lo `test -f 'common/block_util.c' || echo '$(srcdir)/'`common/block_util.c + +liblzma_la-easy_preset.lo: common/easy_preset.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_preset.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_preset.Tpo -c -o liblzma_la-easy_preset.lo `test -f 'common/easy_preset.c' || echo '$(srcdir)/'`common/easy_preset.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-easy_preset.Tpo $(DEPDIR)/liblzma_la-easy_preset.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/easy_preset.c' object='liblzma_la-easy_preset.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_preset.lo `test -f 'common/easy_preset.c' || echo '$(srcdir)/'`common/easy_preset.c + +liblzma_la-filter_common.lo: common/filter_common.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_common.Tpo -c -o liblzma_la-filter_common.lo `test -f 'common/filter_common.c' || echo '$(srcdir)/'`common/filter_common.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-filter_common.Tpo $(DEPDIR)/liblzma_la-filter_common.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/filter_common.c' object='liblzma_la-filter_common.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_common.lo `test -f 'common/filter_common.c' || echo '$(srcdir)/'`common/filter_common.c + +liblzma_la-hardware_physmem.lo: common/hardware_physmem.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-hardware_physmem.lo -MD -MP -MF $(DEPDIR)/liblzma_la-hardware_physmem.Tpo -c -o liblzma_la-hardware_physmem.lo `test -f 'common/hardware_physmem.c' || echo '$(srcdir)/'`common/hardware_physmem.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-hardware_physmem.Tpo $(DEPDIR)/liblzma_la-hardware_physmem.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/hardware_physmem.c' object='liblzma_la-hardware_physmem.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-hardware_physmem.lo `test -f 'common/hardware_physmem.c' || echo '$(srcdir)/'`common/hardware_physmem.c + +liblzma_la-index.lo: common/index.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index.Tpo -c -o liblzma_la-index.lo `test -f 'common/index.c' || echo '$(srcdir)/'`common/index.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-index.Tpo $(DEPDIR)/liblzma_la-index.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/index.c' object='liblzma_la-index.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index.lo `test -f 'common/index.c' || echo '$(srcdir)/'`common/index.c + +liblzma_la-stream_flags_common.lo: common/stream_flags_common.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_flags_common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_flags_common.Tpo -c -o liblzma_la-stream_flags_common.lo `test -f 'common/stream_flags_common.c' || echo '$(srcdir)/'`common/stream_flags_common.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_flags_common.Tpo $(DEPDIR)/liblzma_la-stream_flags_common.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_flags_common.c' object='liblzma_la-stream_flags_common.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_flags_common.lo `test -f 'common/stream_flags_common.c' || echo '$(srcdir)/'`common/stream_flags_common.c + +liblzma_la-string_conversion.lo: common/string_conversion.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-string_conversion.lo -MD -MP -MF $(DEPDIR)/liblzma_la-string_conversion.Tpo -c -o liblzma_la-string_conversion.lo `test -f 'common/string_conversion.c' || echo '$(srcdir)/'`common/string_conversion.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-string_conversion.Tpo $(DEPDIR)/liblzma_la-string_conversion.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/string_conversion.c' object='liblzma_la-string_conversion.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-string_conversion.lo `test -f 'common/string_conversion.c' || echo '$(srcdir)/'`common/string_conversion.c + +liblzma_la-vli_size.lo: common/vli_size.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-vli_size.lo -MD -MP -MF $(DEPDIR)/liblzma_la-vli_size.Tpo -c -o liblzma_la-vli_size.lo `test -f 'common/vli_size.c' || echo '$(srcdir)/'`common/vli_size.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-vli_size.Tpo $(DEPDIR)/liblzma_la-vli_size.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/vli_size.c' object='liblzma_la-vli_size.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-vli_size.lo `test -f 'common/vli_size.c' || echo '$(srcdir)/'`common/vli_size.c + +liblzma_la-hardware_cputhreads.lo: common/hardware_cputhreads.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-hardware_cputhreads.lo -MD -MP -MF $(DEPDIR)/liblzma_la-hardware_cputhreads.Tpo -c -o liblzma_la-hardware_cputhreads.lo `test -f 'common/hardware_cputhreads.c' || echo '$(srcdir)/'`common/hardware_cputhreads.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-hardware_cputhreads.Tpo $(DEPDIR)/liblzma_la-hardware_cputhreads.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/hardware_cputhreads.c' object='liblzma_la-hardware_cputhreads.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-hardware_cputhreads.lo `test -f 'common/hardware_cputhreads.c' || echo '$(srcdir)/'`common/hardware_cputhreads.c + +liblzma_la-outqueue.lo: common/outqueue.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-outqueue.lo -MD -MP -MF $(DEPDIR)/liblzma_la-outqueue.Tpo -c -o liblzma_la-outqueue.lo `test -f 'common/outqueue.c' || echo '$(srcdir)/'`common/outqueue.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-outqueue.Tpo $(DEPDIR)/liblzma_la-outqueue.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/outqueue.c' object='liblzma_la-outqueue.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-outqueue.lo `test -f 'common/outqueue.c' || echo '$(srcdir)/'`common/outqueue.c + +liblzma_la-alone_encoder.lo: common/alone_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-alone_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-alone_encoder.Tpo -c -o liblzma_la-alone_encoder.lo `test -f 'common/alone_encoder.c' || echo '$(srcdir)/'`common/alone_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-alone_encoder.Tpo $(DEPDIR)/liblzma_la-alone_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/alone_encoder.c' object='liblzma_la-alone_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-alone_encoder.lo `test -f 'common/alone_encoder.c' || echo '$(srcdir)/'`common/alone_encoder.c + +liblzma_la-block_buffer_encoder.lo: common/block_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_buffer_encoder.Tpo -c -o liblzma_la-block_buffer_encoder.lo `test -f 'common/block_buffer_encoder.c' || echo '$(srcdir)/'`common/block_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-block_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-block_buffer_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/block_buffer_encoder.c' object='liblzma_la-block_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_buffer_encoder.lo `test -f 'common/block_buffer_encoder.c' || echo '$(srcdir)/'`common/block_buffer_encoder.c + +liblzma_la-block_encoder.lo: common/block_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_encoder.Tpo -c -o liblzma_la-block_encoder.lo `test -f 'common/block_encoder.c' || echo '$(srcdir)/'`common/block_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-block_encoder.Tpo $(DEPDIR)/liblzma_la-block_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/block_encoder.c' object='liblzma_la-block_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_encoder.lo `test -f 'common/block_encoder.c' || echo '$(srcdir)/'`common/block_encoder.c + +liblzma_la-block_header_encoder.lo: common/block_header_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_header_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_header_encoder.Tpo -c -o liblzma_la-block_header_encoder.lo `test -f 'common/block_header_encoder.c' || echo '$(srcdir)/'`common/block_header_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-block_header_encoder.Tpo $(DEPDIR)/liblzma_la-block_header_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/block_header_encoder.c' object='liblzma_la-block_header_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_header_encoder.lo `test -f 'common/block_header_encoder.c' || echo '$(srcdir)/'`common/block_header_encoder.c + +liblzma_la-easy_buffer_encoder.lo: common/easy_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_buffer_encoder.Tpo -c -o liblzma_la-easy_buffer_encoder.lo `test -f 'common/easy_buffer_encoder.c' || echo '$(srcdir)/'`common/easy_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-easy_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-easy_buffer_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/easy_buffer_encoder.c' object='liblzma_la-easy_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_buffer_encoder.lo `test -f 'common/easy_buffer_encoder.c' || echo '$(srcdir)/'`common/easy_buffer_encoder.c + +liblzma_la-easy_encoder.lo: common/easy_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_encoder.Tpo -c -o liblzma_la-easy_encoder.lo `test -f 'common/easy_encoder.c' || echo '$(srcdir)/'`common/easy_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-easy_encoder.Tpo $(DEPDIR)/liblzma_la-easy_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/easy_encoder.c' object='liblzma_la-easy_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_encoder.lo `test -f 'common/easy_encoder.c' || echo '$(srcdir)/'`common/easy_encoder.c + +liblzma_la-easy_encoder_memusage.lo: common/easy_encoder_memusage.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_encoder_memusage.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_encoder_memusage.Tpo -c -o liblzma_la-easy_encoder_memusage.lo `test -f 'common/easy_encoder_memusage.c' || echo '$(srcdir)/'`common/easy_encoder_memusage.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-easy_encoder_memusage.Tpo $(DEPDIR)/liblzma_la-easy_encoder_memusage.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/easy_encoder_memusage.c' object='liblzma_la-easy_encoder_memusage.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_encoder_memusage.lo `test -f 'common/easy_encoder_memusage.c' || echo '$(srcdir)/'`common/easy_encoder_memusage.c + +liblzma_la-filter_buffer_encoder.lo: common/filter_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_buffer_encoder.Tpo -c -o liblzma_la-filter_buffer_encoder.lo `test -f 'common/filter_buffer_encoder.c' || echo '$(srcdir)/'`common/filter_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-filter_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-filter_buffer_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/filter_buffer_encoder.c' object='liblzma_la-filter_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_buffer_encoder.lo `test -f 'common/filter_buffer_encoder.c' || echo '$(srcdir)/'`common/filter_buffer_encoder.c + +liblzma_la-filter_encoder.lo: common/filter_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_encoder.Tpo -c -o liblzma_la-filter_encoder.lo `test -f 'common/filter_encoder.c' || echo '$(srcdir)/'`common/filter_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-filter_encoder.Tpo $(DEPDIR)/liblzma_la-filter_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/filter_encoder.c' object='liblzma_la-filter_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_encoder.lo `test -f 'common/filter_encoder.c' || echo '$(srcdir)/'`common/filter_encoder.c + +liblzma_la-filter_flags_encoder.lo: common/filter_flags_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_flags_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_flags_encoder.Tpo -c -o liblzma_la-filter_flags_encoder.lo `test -f 'common/filter_flags_encoder.c' || echo '$(srcdir)/'`common/filter_flags_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-filter_flags_encoder.Tpo $(DEPDIR)/liblzma_la-filter_flags_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/filter_flags_encoder.c' object='liblzma_la-filter_flags_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_flags_encoder.lo `test -f 'common/filter_flags_encoder.c' || echo '$(srcdir)/'`common/filter_flags_encoder.c + +liblzma_la-index_encoder.lo: common/index_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index_encoder.Tpo -c -o liblzma_la-index_encoder.lo `test -f 'common/index_encoder.c' || echo '$(srcdir)/'`common/index_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-index_encoder.Tpo $(DEPDIR)/liblzma_la-index_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/index_encoder.c' object='liblzma_la-index_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index_encoder.lo `test -f 'common/index_encoder.c' || echo '$(srcdir)/'`common/index_encoder.c + +liblzma_la-stream_buffer_encoder.lo: common/stream_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_buffer_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_buffer_encoder.Tpo -c -o liblzma_la-stream_buffer_encoder.lo `test -f 'common/stream_buffer_encoder.c' || echo '$(srcdir)/'`common/stream_buffer_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_buffer_encoder.Tpo $(DEPDIR)/liblzma_la-stream_buffer_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_buffer_encoder.c' object='liblzma_la-stream_buffer_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_buffer_encoder.lo `test -f 'common/stream_buffer_encoder.c' || echo '$(srcdir)/'`common/stream_buffer_encoder.c + +liblzma_la-stream_encoder.lo: common/stream_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_encoder.Tpo -c -o liblzma_la-stream_encoder.lo `test -f 'common/stream_encoder.c' || echo '$(srcdir)/'`common/stream_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_encoder.Tpo $(DEPDIR)/liblzma_la-stream_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_encoder.c' object='liblzma_la-stream_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_encoder.lo `test -f 'common/stream_encoder.c' || echo '$(srcdir)/'`common/stream_encoder.c + +liblzma_la-stream_flags_encoder.lo: common/stream_flags_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_flags_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_flags_encoder.Tpo -c -o liblzma_la-stream_flags_encoder.lo `test -f 'common/stream_flags_encoder.c' || echo '$(srcdir)/'`common/stream_flags_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_flags_encoder.Tpo $(DEPDIR)/liblzma_la-stream_flags_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_flags_encoder.c' object='liblzma_la-stream_flags_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_flags_encoder.lo `test -f 'common/stream_flags_encoder.c' || echo '$(srcdir)/'`common/stream_flags_encoder.c + +liblzma_la-vli_encoder.lo: common/vli_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-vli_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-vli_encoder.Tpo -c -o liblzma_la-vli_encoder.lo `test -f 'common/vli_encoder.c' || echo '$(srcdir)/'`common/vli_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-vli_encoder.Tpo $(DEPDIR)/liblzma_la-vli_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/vli_encoder.c' object='liblzma_la-vli_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-vli_encoder.lo `test -f 'common/vli_encoder.c' || echo '$(srcdir)/'`common/vli_encoder.c + +liblzma_la-stream_encoder_mt.lo: common/stream_encoder_mt.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_encoder_mt.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_encoder_mt.Tpo -c -o liblzma_la-stream_encoder_mt.lo `test -f 'common/stream_encoder_mt.c' || echo '$(srcdir)/'`common/stream_encoder_mt.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_encoder_mt.Tpo $(DEPDIR)/liblzma_la-stream_encoder_mt.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_encoder_mt.c' object='liblzma_la-stream_encoder_mt.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_encoder_mt.lo `test -f 'common/stream_encoder_mt.c' || echo '$(srcdir)/'`common/stream_encoder_mt.c + +liblzma_la-microlzma_encoder.lo: common/microlzma_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-microlzma_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-microlzma_encoder.Tpo -c -o liblzma_la-microlzma_encoder.lo `test -f 'common/microlzma_encoder.c' || echo '$(srcdir)/'`common/microlzma_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-microlzma_encoder.Tpo $(DEPDIR)/liblzma_la-microlzma_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/microlzma_encoder.c' object='liblzma_la-microlzma_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-microlzma_encoder.lo `test -f 'common/microlzma_encoder.c' || echo '$(srcdir)/'`common/microlzma_encoder.c + +liblzma_la-alone_decoder.lo: common/alone_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-alone_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-alone_decoder.Tpo -c -o liblzma_la-alone_decoder.lo `test -f 'common/alone_decoder.c' || echo '$(srcdir)/'`common/alone_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-alone_decoder.Tpo $(DEPDIR)/liblzma_la-alone_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/alone_decoder.c' object='liblzma_la-alone_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-alone_decoder.lo `test -f 'common/alone_decoder.c' || echo '$(srcdir)/'`common/alone_decoder.c + +liblzma_la-auto_decoder.lo: common/auto_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-auto_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-auto_decoder.Tpo -c -o liblzma_la-auto_decoder.lo `test -f 'common/auto_decoder.c' || echo '$(srcdir)/'`common/auto_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-auto_decoder.Tpo $(DEPDIR)/liblzma_la-auto_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/auto_decoder.c' object='liblzma_la-auto_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-auto_decoder.lo `test -f 'common/auto_decoder.c' || echo '$(srcdir)/'`common/auto_decoder.c + +liblzma_la-block_buffer_decoder.lo: common/block_buffer_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_buffer_decoder.Tpo -c -o liblzma_la-block_buffer_decoder.lo `test -f 'common/block_buffer_decoder.c' || echo '$(srcdir)/'`common/block_buffer_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-block_buffer_decoder.Tpo $(DEPDIR)/liblzma_la-block_buffer_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/block_buffer_decoder.c' object='liblzma_la-block_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_buffer_decoder.lo `test -f 'common/block_buffer_decoder.c' || echo '$(srcdir)/'`common/block_buffer_decoder.c + +liblzma_la-block_decoder.lo: common/block_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_decoder.Tpo -c -o liblzma_la-block_decoder.lo `test -f 'common/block_decoder.c' || echo '$(srcdir)/'`common/block_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-block_decoder.Tpo $(DEPDIR)/liblzma_la-block_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/block_decoder.c' object='liblzma_la-block_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_decoder.lo `test -f 'common/block_decoder.c' || echo '$(srcdir)/'`common/block_decoder.c + +liblzma_la-block_header_decoder.lo: common/block_header_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-block_header_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-block_header_decoder.Tpo -c -o liblzma_la-block_header_decoder.lo `test -f 'common/block_header_decoder.c' || echo '$(srcdir)/'`common/block_header_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-block_header_decoder.Tpo $(DEPDIR)/liblzma_la-block_header_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/block_header_decoder.c' object='liblzma_la-block_header_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-block_header_decoder.lo `test -f 'common/block_header_decoder.c' || echo '$(srcdir)/'`common/block_header_decoder.c + +liblzma_la-easy_decoder_memusage.lo: common/easy_decoder_memusage.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-easy_decoder_memusage.lo -MD -MP -MF $(DEPDIR)/liblzma_la-easy_decoder_memusage.Tpo -c -o liblzma_la-easy_decoder_memusage.lo `test -f 'common/easy_decoder_memusage.c' || echo '$(srcdir)/'`common/easy_decoder_memusage.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-easy_decoder_memusage.Tpo $(DEPDIR)/liblzma_la-easy_decoder_memusage.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/easy_decoder_memusage.c' object='liblzma_la-easy_decoder_memusage.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-easy_decoder_memusage.lo `test -f 'common/easy_decoder_memusage.c' || echo '$(srcdir)/'`common/easy_decoder_memusage.c + +liblzma_la-file_info.lo: common/file_info.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-file_info.lo -MD -MP -MF $(DEPDIR)/liblzma_la-file_info.Tpo -c -o liblzma_la-file_info.lo `test -f 'common/file_info.c' || echo '$(srcdir)/'`common/file_info.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-file_info.Tpo $(DEPDIR)/liblzma_la-file_info.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/file_info.c' object='liblzma_la-file_info.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-file_info.lo `test -f 'common/file_info.c' || echo '$(srcdir)/'`common/file_info.c + +liblzma_la-filter_buffer_decoder.lo: common/filter_buffer_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_buffer_decoder.Tpo -c -o liblzma_la-filter_buffer_decoder.lo `test -f 'common/filter_buffer_decoder.c' || echo '$(srcdir)/'`common/filter_buffer_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-filter_buffer_decoder.Tpo $(DEPDIR)/liblzma_la-filter_buffer_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/filter_buffer_decoder.c' object='liblzma_la-filter_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_buffer_decoder.lo `test -f 'common/filter_buffer_decoder.c' || echo '$(srcdir)/'`common/filter_buffer_decoder.c + +liblzma_la-filter_decoder.lo: common/filter_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_decoder.Tpo -c -o liblzma_la-filter_decoder.lo `test -f 'common/filter_decoder.c' || echo '$(srcdir)/'`common/filter_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-filter_decoder.Tpo $(DEPDIR)/liblzma_la-filter_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/filter_decoder.c' object='liblzma_la-filter_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_decoder.lo `test -f 'common/filter_decoder.c' || echo '$(srcdir)/'`common/filter_decoder.c + +liblzma_la-filter_flags_decoder.lo: common/filter_flags_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-filter_flags_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-filter_flags_decoder.Tpo -c -o liblzma_la-filter_flags_decoder.lo `test -f 'common/filter_flags_decoder.c' || echo '$(srcdir)/'`common/filter_flags_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-filter_flags_decoder.Tpo $(DEPDIR)/liblzma_la-filter_flags_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/filter_flags_decoder.c' object='liblzma_la-filter_flags_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-filter_flags_decoder.lo `test -f 'common/filter_flags_decoder.c' || echo '$(srcdir)/'`common/filter_flags_decoder.c + +liblzma_la-index_decoder.lo: common/index_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index_decoder.Tpo -c -o liblzma_la-index_decoder.lo `test -f 'common/index_decoder.c' || echo '$(srcdir)/'`common/index_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-index_decoder.Tpo $(DEPDIR)/liblzma_la-index_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/index_decoder.c' object='liblzma_la-index_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index_decoder.lo `test -f 'common/index_decoder.c' || echo '$(srcdir)/'`common/index_decoder.c + +liblzma_la-index_hash.lo: common/index_hash.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-index_hash.lo -MD -MP -MF $(DEPDIR)/liblzma_la-index_hash.Tpo -c -o liblzma_la-index_hash.lo `test -f 'common/index_hash.c' || echo '$(srcdir)/'`common/index_hash.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-index_hash.Tpo $(DEPDIR)/liblzma_la-index_hash.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/index_hash.c' object='liblzma_la-index_hash.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-index_hash.lo `test -f 'common/index_hash.c' || echo '$(srcdir)/'`common/index_hash.c + +liblzma_la-stream_buffer_decoder.lo: common/stream_buffer_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_buffer_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_buffer_decoder.Tpo -c -o liblzma_la-stream_buffer_decoder.lo `test -f 'common/stream_buffer_decoder.c' || echo '$(srcdir)/'`common/stream_buffer_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_buffer_decoder.Tpo $(DEPDIR)/liblzma_la-stream_buffer_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_buffer_decoder.c' object='liblzma_la-stream_buffer_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_buffer_decoder.lo `test -f 'common/stream_buffer_decoder.c' || echo '$(srcdir)/'`common/stream_buffer_decoder.c + +liblzma_la-stream_decoder.lo: common/stream_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_decoder.Tpo -c -o liblzma_la-stream_decoder.lo `test -f 'common/stream_decoder.c' || echo '$(srcdir)/'`common/stream_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_decoder.Tpo $(DEPDIR)/liblzma_la-stream_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_decoder.c' object='liblzma_la-stream_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_decoder.lo `test -f 'common/stream_decoder.c' || echo '$(srcdir)/'`common/stream_decoder.c + +liblzma_la-stream_flags_decoder.lo: common/stream_flags_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_flags_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_flags_decoder.Tpo -c -o liblzma_la-stream_flags_decoder.lo `test -f 'common/stream_flags_decoder.c' || echo '$(srcdir)/'`common/stream_flags_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_flags_decoder.Tpo $(DEPDIR)/liblzma_la-stream_flags_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_flags_decoder.c' object='liblzma_la-stream_flags_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_flags_decoder.lo `test -f 'common/stream_flags_decoder.c' || echo '$(srcdir)/'`common/stream_flags_decoder.c + +liblzma_la-vli_decoder.lo: common/vli_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-vli_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-vli_decoder.Tpo -c -o liblzma_la-vli_decoder.lo `test -f 'common/vli_decoder.c' || echo '$(srcdir)/'`common/vli_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-vli_decoder.Tpo $(DEPDIR)/liblzma_la-vli_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/vli_decoder.c' object='liblzma_la-vli_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-vli_decoder.lo `test -f 'common/vli_decoder.c' || echo '$(srcdir)/'`common/vli_decoder.c + +liblzma_la-stream_decoder_mt.lo: common/stream_decoder_mt.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-stream_decoder_mt.lo -MD -MP -MF $(DEPDIR)/liblzma_la-stream_decoder_mt.Tpo -c -o liblzma_la-stream_decoder_mt.lo `test -f 'common/stream_decoder_mt.c' || echo '$(srcdir)/'`common/stream_decoder_mt.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-stream_decoder_mt.Tpo $(DEPDIR)/liblzma_la-stream_decoder_mt.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/stream_decoder_mt.c' object='liblzma_la-stream_decoder_mt.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-stream_decoder_mt.lo `test -f 'common/stream_decoder_mt.c' || echo '$(srcdir)/'`common/stream_decoder_mt.c + +liblzma_la-microlzma_decoder.lo: common/microlzma_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-microlzma_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-microlzma_decoder.Tpo -c -o liblzma_la-microlzma_decoder.lo `test -f 'common/microlzma_decoder.c' || echo '$(srcdir)/'`common/microlzma_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-microlzma_decoder.Tpo $(DEPDIR)/liblzma_la-microlzma_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/microlzma_decoder.c' object='liblzma_la-microlzma_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-microlzma_decoder.lo `test -f 'common/microlzma_decoder.c' || echo '$(srcdir)/'`common/microlzma_decoder.c + +liblzma_la-lzip_decoder.lo: common/lzip_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzip_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzip_decoder.Tpo -c -o liblzma_la-lzip_decoder.lo `test -f 'common/lzip_decoder.c' || echo '$(srcdir)/'`common/lzip_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzip_decoder.Tpo $(DEPDIR)/liblzma_la-lzip_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/lzip_decoder.c' object='liblzma_la-lzip_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzip_decoder.lo `test -f 'common/lzip_decoder.c' || echo '$(srcdir)/'`common/lzip_decoder.c + +liblzma_la-check.lo: check/check.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-check.lo -MD -MP -MF $(DEPDIR)/liblzma_la-check.Tpo -c -o liblzma_la-check.lo `test -f 'check/check.c' || echo '$(srcdir)/'`check/check.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-check.Tpo $(DEPDIR)/liblzma_la-check.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/check.c' object='liblzma_la-check.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-check.lo `test -f 'check/check.c' || echo '$(srcdir)/'`check/check.c + +liblzma_la-crc32_small.lo: check/crc32_small.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc32_small.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_small.Tpo -c -o liblzma_la-crc32_small.lo `test -f 'check/crc32_small.c' || echo '$(srcdir)/'`check/crc32_small.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc32_small.Tpo $(DEPDIR)/liblzma_la-crc32_small.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/crc32_small.c' object='liblzma_la-crc32_small.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc32_small.lo `test -f 'check/crc32_small.c' || echo '$(srcdir)/'`check/crc32_small.c + +liblzma_la-crc32_table.lo: check/crc32_table.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc32_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_table.Tpo -c -o liblzma_la-crc32_table.lo `test -f 'check/crc32_table.c' || echo '$(srcdir)/'`check/crc32_table.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc32_table.Tpo $(DEPDIR)/liblzma_la-crc32_table.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/crc32_table.c' object='liblzma_la-crc32_table.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc32_table.lo `test -f 'check/crc32_table.c' || echo '$(srcdir)/'`check/crc32_table.c + +liblzma_la-crc32_fast.lo: check/crc32_fast.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc32_fast.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc32_fast.Tpo -c -o liblzma_la-crc32_fast.lo `test -f 'check/crc32_fast.c' || echo '$(srcdir)/'`check/crc32_fast.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc32_fast.Tpo $(DEPDIR)/liblzma_la-crc32_fast.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/crc32_fast.c' object='liblzma_la-crc32_fast.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc32_fast.lo `test -f 'check/crc32_fast.c' || echo '$(srcdir)/'`check/crc32_fast.c + +liblzma_la-crc64_small.lo: check/crc64_small.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc64_small.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_small.Tpo -c -o liblzma_la-crc64_small.lo `test -f 'check/crc64_small.c' || echo '$(srcdir)/'`check/crc64_small.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc64_small.Tpo $(DEPDIR)/liblzma_la-crc64_small.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/crc64_small.c' object='liblzma_la-crc64_small.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc64_small.lo `test -f 'check/crc64_small.c' || echo '$(srcdir)/'`check/crc64_small.c + +liblzma_la-crc64_table.lo: check/crc64_table.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc64_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_table.Tpo -c -o liblzma_la-crc64_table.lo `test -f 'check/crc64_table.c' || echo '$(srcdir)/'`check/crc64_table.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc64_table.Tpo $(DEPDIR)/liblzma_la-crc64_table.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/crc64_table.c' object='liblzma_la-crc64_table.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc64_table.lo `test -f 'check/crc64_table.c' || echo '$(srcdir)/'`check/crc64_table.c + +liblzma_la-crc64_fast.lo: check/crc64_fast.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-crc64_fast.lo -MD -MP -MF $(DEPDIR)/liblzma_la-crc64_fast.Tpo -c -o liblzma_la-crc64_fast.lo `test -f 'check/crc64_fast.c' || echo '$(srcdir)/'`check/crc64_fast.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-crc64_fast.Tpo $(DEPDIR)/liblzma_la-crc64_fast.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/crc64_fast.c' object='liblzma_la-crc64_fast.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-crc64_fast.lo `test -f 'check/crc64_fast.c' || echo '$(srcdir)/'`check/crc64_fast.c + +liblzma_la-sha256.lo: check/sha256.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-sha256.lo -MD -MP -MF $(DEPDIR)/liblzma_la-sha256.Tpo -c -o liblzma_la-sha256.lo `test -f 'check/sha256.c' || echo '$(srcdir)/'`check/sha256.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-sha256.Tpo $(DEPDIR)/liblzma_la-sha256.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='check/sha256.c' object='liblzma_la-sha256.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-sha256.lo `test -f 'check/sha256.c' || echo '$(srcdir)/'`check/sha256.c + +liblzma_la-lz_encoder.lo: lz/lz_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lz_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lz_encoder.Tpo -c -o liblzma_la-lz_encoder.lo `test -f 'lz/lz_encoder.c' || echo '$(srcdir)/'`lz/lz_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lz_encoder.Tpo $(DEPDIR)/liblzma_la-lz_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lz/lz_encoder.c' object='liblzma_la-lz_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lz_encoder.lo `test -f 'lz/lz_encoder.c' || echo '$(srcdir)/'`lz/lz_encoder.c + +liblzma_la-lz_encoder_mf.lo: lz/lz_encoder_mf.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lz_encoder_mf.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lz_encoder_mf.Tpo -c -o liblzma_la-lz_encoder_mf.lo `test -f 'lz/lz_encoder_mf.c' || echo '$(srcdir)/'`lz/lz_encoder_mf.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lz_encoder_mf.Tpo $(DEPDIR)/liblzma_la-lz_encoder_mf.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lz/lz_encoder_mf.c' object='liblzma_la-lz_encoder_mf.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lz_encoder_mf.lo `test -f 'lz/lz_encoder_mf.c' || echo '$(srcdir)/'`lz/lz_encoder_mf.c + +liblzma_la-lz_decoder.lo: lz/lz_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lz_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lz_decoder.Tpo -c -o liblzma_la-lz_decoder.lo `test -f 'lz/lz_decoder.c' || echo '$(srcdir)/'`lz/lz_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lz_decoder.Tpo $(DEPDIR)/liblzma_la-lz_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lz/lz_decoder.c' object='liblzma_la-lz_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lz_decoder.lo `test -f 'lz/lz_decoder.c' || echo '$(srcdir)/'`lz/lz_decoder.c + +liblzma_la-lzma_encoder_presets.lo: lzma/lzma_encoder_presets.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder_presets.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder_presets.Tpo -c -o liblzma_la-lzma_encoder_presets.lo `test -f 'lzma/lzma_encoder_presets.c' || echo '$(srcdir)/'`lzma/lzma_encoder_presets.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder_presets.Tpo $(DEPDIR)/liblzma_la-lzma_encoder_presets.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/lzma_encoder_presets.c' object='liblzma_la-lzma_encoder_presets.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder_presets.lo `test -f 'lzma/lzma_encoder_presets.c' || echo '$(srcdir)/'`lzma/lzma_encoder_presets.c + +liblzma_la-lzma_encoder.lo: lzma/lzma_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder.Tpo -c -o liblzma_la-lzma_encoder.lo `test -f 'lzma/lzma_encoder.c' || echo '$(srcdir)/'`lzma/lzma_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder.Tpo $(DEPDIR)/liblzma_la-lzma_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/lzma_encoder.c' object='liblzma_la-lzma_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder.lo `test -f 'lzma/lzma_encoder.c' || echo '$(srcdir)/'`lzma/lzma_encoder.c + +liblzma_la-lzma_encoder_optimum_fast.lo: lzma/lzma_encoder_optimum_fast.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder_optimum_fast.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Tpo -c -o liblzma_la-lzma_encoder_optimum_fast.lo `test -f 'lzma/lzma_encoder_optimum_fast.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_fast.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Tpo $(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/lzma_encoder_optimum_fast.c' object='liblzma_la-lzma_encoder_optimum_fast.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder_optimum_fast.lo `test -f 'lzma/lzma_encoder_optimum_fast.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_fast.c + +liblzma_la-lzma_encoder_optimum_normal.lo: lzma/lzma_encoder_optimum_normal.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_encoder_optimum_normal.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Tpo -c -o liblzma_la-lzma_encoder_optimum_normal.lo `test -f 'lzma/lzma_encoder_optimum_normal.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_normal.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Tpo $(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/lzma_encoder_optimum_normal.c' object='liblzma_la-lzma_encoder_optimum_normal.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_encoder_optimum_normal.lo `test -f 'lzma/lzma_encoder_optimum_normal.c' || echo '$(srcdir)/'`lzma/lzma_encoder_optimum_normal.c + +liblzma_la-fastpos_table.lo: lzma/fastpos_table.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-fastpos_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-fastpos_table.Tpo -c -o liblzma_la-fastpos_table.lo `test -f 'lzma/fastpos_table.c' || echo '$(srcdir)/'`lzma/fastpos_table.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-fastpos_table.Tpo $(DEPDIR)/liblzma_la-fastpos_table.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/fastpos_table.c' object='liblzma_la-fastpos_table.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-fastpos_table.lo `test -f 'lzma/fastpos_table.c' || echo '$(srcdir)/'`lzma/fastpos_table.c + +liblzma_la-lzma_decoder.lo: lzma/lzma_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma_decoder.Tpo -c -o liblzma_la-lzma_decoder.lo `test -f 'lzma/lzma_decoder.c' || echo '$(srcdir)/'`lzma/lzma_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzma_decoder.Tpo $(DEPDIR)/liblzma_la-lzma_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/lzma_decoder.c' object='liblzma_la-lzma_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma_decoder.lo `test -f 'lzma/lzma_decoder.c' || echo '$(srcdir)/'`lzma/lzma_decoder.c + +liblzma_la-lzma2_encoder.lo: lzma/lzma2_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma2_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma2_encoder.Tpo -c -o liblzma_la-lzma2_encoder.lo `test -f 'lzma/lzma2_encoder.c' || echo '$(srcdir)/'`lzma/lzma2_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzma2_encoder.Tpo $(DEPDIR)/liblzma_la-lzma2_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/lzma2_encoder.c' object='liblzma_la-lzma2_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma2_encoder.lo `test -f 'lzma/lzma2_encoder.c' || echo '$(srcdir)/'`lzma/lzma2_encoder.c + +liblzma_la-lzma2_decoder.lo: lzma/lzma2_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-lzma2_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-lzma2_decoder.Tpo -c -o liblzma_la-lzma2_decoder.lo `test -f 'lzma/lzma2_decoder.c' || echo '$(srcdir)/'`lzma/lzma2_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-lzma2_decoder.Tpo $(DEPDIR)/liblzma_la-lzma2_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzma/lzma2_decoder.c' object='liblzma_la-lzma2_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-lzma2_decoder.lo `test -f 'lzma/lzma2_decoder.c' || echo '$(srcdir)/'`lzma/lzma2_decoder.c + +liblzma_la-price_table.lo: rangecoder/price_table.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-price_table.lo -MD -MP -MF $(DEPDIR)/liblzma_la-price_table.Tpo -c -o liblzma_la-price_table.lo `test -f 'rangecoder/price_table.c' || echo '$(srcdir)/'`rangecoder/price_table.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-price_table.Tpo $(DEPDIR)/liblzma_la-price_table.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='rangecoder/price_table.c' object='liblzma_la-price_table.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-price_table.lo `test -f 'rangecoder/price_table.c' || echo '$(srcdir)/'`rangecoder/price_table.c + +liblzma_la-delta_common.lo: delta/delta_common.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-delta_common.lo -MD -MP -MF $(DEPDIR)/liblzma_la-delta_common.Tpo -c -o liblzma_la-delta_common.lo `test -f 'delta/delta_common.c' || echo '$(srcdir)/'`delta/delta_common.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-delta_common.Tpo $(DEPDIR)/liblzma_la-delta_common.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='delta/delta_common.c' object='liblzma_la-delta_common.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-delta_common.lo `test -f 'delta/delta_common.c' || echo '$(srcdir)/'`delta/delta_common.c + +liblzma_la-delta_encoder.lo: delta/delta_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-delta_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-delta_encoder.Tpo -c -o liblzma_la-delta_encoder.lo `test -f 'delta/delta_encoder.c' || echo '$(srcdir)/'`delta/delta_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-delta_encoder.Tpo $(DEPDIR)/liblzma_la-delta_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='delta/delta_encoder.c' object='liblzma_la-delta_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-delta_encoder.lo `test -f 'delta/delta_encoder.c' || echo '$(srcdir)/'`delta/delta_encoder.c + +liblzma_la-delta_decoder.lo: delta/delta_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-delta_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-delta_decoder.Tpo -c -o liblzma_la-delta_decoder.lo `test -f 'delta/delta_decoder.c' || echo '$(srcdir)/'`delta/delta_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-delta_decoder.Tpo $(DEPDIR)/liblzma_la-delta_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='delta/delta_decoder.c' object='liblzma_la-delta_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-delta_decoder.lo `test -f 'delta/delta_decoder.c' || echo '$(srcdir)/'`delta/delta_decoder.c + +liblzma_la-simple_coder.lo: simple/simple_coder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-simple_coder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-simple_coder.Tpo -c -o liblzma_la-simple_coder.lo `test -f 'simple/simple_coder.c' || echo '$(srcdir)/'`simple/simple_coder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-simple_coder.Tpo $(DEPDIR)/liblzma_la-simple_coder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/simple_coder.c' object='liblzma_la-simple_coder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-simple_coder.lo `test -f 'simple/simple_coder.c' || echo '$(srcdir)/'`simple/simple_coder.c + +liblzma_la-simple_encoder.lo: simple/simple_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-simple_encoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-simple_encoder.Tpo -c -o liblzma_la-simple_encoder.lo `test -f 'simple/simple_encoder.c' || echo '$(srcdir)/'`simple/simple_encoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-simple_encoder.Tpo $(DEPDIR)/liblzma_la-simple_encoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/simple_encoder.c' object='liblzma_la-simple_encoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-simple_encoder.lo `test -f 'simple/simple_encoder.c' || echo '$(srcdir)/'`simple/simple_encoder.c + +liblzma_la-simple_decoder.lo: simple/simple_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-simple_decoder.lo -MD -MP -MF $(DEPDIR)/liblzma_la-simple_decoder.Tpo -c -o liblzma_la-simple_decoder.lo `test -f 'simple/simple_decoder.c' || echo '$(srcdir)/'`simple/simple_decoder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-simple_decoder.Tpo $(DEPDIR)/liblzma_la-simple_decoder.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/simple_decoder.c' object='liblzma_la-simple_decoder.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-simple_decoder.lo `test -f 'simple/simple_decoder.c' || echo '$(srcdir)/'`simple/simple_decoder.c + +liblzma_la-x86.lo: simple/x86.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-x86.lo -MD -MP -MF $(DEPDIR)/liblzma_la-x86.Tpo -c -o liblzma_la-x86.lo `test -f 'simple/x86.c' || echo '$(srcdir)/'`simple/x86.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-x86.Tpo $(DEPDIR)/liblzma_la-x86.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/x86.c' object='liblzma_la-x86.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-x86.lo `test -f 'simple/x86.c' || echo '$(srcdir)/'`simple/x86.c + +liblzma_la-powerpc.lo: simple/powerpc.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-powerpc.lo -MD -MP -MF $(DEPDIR)/liblzma_la-powerpc.Tpo -c -o liblzma_la-powerpc.lo `test -f 'simple/powerpc.c' || echo '$(srcdir)/'`simple/powerpc.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-powerpc.Tpo $(DEPDIR)/liblzma_la-powerpc.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/powerpc.c' object='liblzma_la-powerpc.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-powerpc.lo `test -f 'simple/powerpc.c' || echo '$(srcdir)/'`simple/powerpc.c + +liblzma_la-ia64.lo: simple/ia64.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-ia64.lo -MD -MP -MF $(DEPDIR)/liblzma_la-ia64.Tpo -c -o liblzma_la-ia64.lo `test -f 'simple/ia64.c' || echo '$(srcdir)/'`simple/ia64.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-ia64.Tpo $(DEPDIR)/liblzma_la-ia64.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/ia64.c' object='liblzma_la-ia64.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-ia64.lo `test -f 'simple/ia64.c' || echo '$(srcdir)/'`simple/ia64.c + +liblzma_la-arm.lo: simple/arm.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-arm.lo -MD -MP -MF $(DEPDIR)/liblzma_la-arm.Tpo -c -o liblzma_la-arm.lo `test -f 'simple/arm.c' || echo '$(srcdir)/'`simple/arm.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-arm.Tpo $(DEPDIR)/liblzma_la-arm.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/arm.c' object='liblzma_la-arm.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-arm.lo `test -f 'simple/arm.c' || echo '$(srcdir)/'`simple/arm.c + +liblzma_la-armthumb.lo: simple/armthumb.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-armthumb.lo -MD -MP -MF $(DEPDIR)/liblzma_la-armthumb.Tpo -c -o liblzma_la-armthumb.lo `test -f 'simple/armthumb.c' || echo '$(srcdir)/'`simple/armthumb.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-armthumb.Tpo $(DEPDIR)/liblzma_la-armthumb.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/armthumb.c' object='liblzma_la-armthumb.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-armthumb.lo `test -f 'simple/armthumb.c' || echo '$(srcdir)/'`simple/armthumb.c + +liblzma_la-arm64.lo: simple/arm64.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-arm64.lo -MD -MP -MF $(DEPDIR)/liblzma_la-arm64.Tpo -c -o liblzma_la-arm64.lo `test -f 'simple/arm64.c' || echo '$(srcdir)/'`simple/arm64.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-arm64.Tpo $(DEPDIR)/liblzma_la-arm64.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/arm64.c' object='liblzma_la-arm64.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-arm64.lo `test -f 'simple/arm64.c' || echo '$(srcdir)/'`simple/arm64.c + +liblzma_la-sparc.lo: simple/sparc.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liblzma_la-sparc.lo -MD -MP -MF $(DEPDIR)/liblzma_la-sparc.Tpo -c -o liblzma_la-sparc.lo `test -f 'simple/sparc.c' || echo '$(srcdir)/'`simple/sparc.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblzma_la-sparc.Tpo $(DEPDIR)/liblzma_la-sparc.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='simple/sparc.c' object='liblzma_la-sparc.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liblzma_la-sparc.lo `test -f 'simple/sparc.c' || echo '$(srcdir)/'`simple/sparc.c + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-docDATA: $(doc_DATA) + @$(NORMAL_INSTALL) + @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ + done + +uninstall-docDATA: + @$(NORMAL_UNINSTALL) + @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile $(LTLIBRARIES) $(DATA) +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \ + mostlyclean-am + +distclean: distclean-recursive + -rm -f ./$(DEPDIR)/liblzma_la-alone_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-alone_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-arm.Plo + -rm -f ./$(DEPDIR)/liblzma_la-arm64.Plo + -rm -f ./$(DEPDIR)/liblzma_la-armthumb.Plo + -rm -f ./$(DEPDIR)/liblzma_la-auto_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_buffer_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_header_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_header_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_util.Plo + -rm -f ./$(DEPDIR)/liblzma_la-check.Plo + -rm -f ./$(DEPDIR)/liblzma_la-common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_fast.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_small.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_x86.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_fast.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_small.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_x86.Plo + -rm -f ./$(DEPDIR)/liblzma_la-delta_common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-delta_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-delta_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_decoder_memusage.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_encoder_memusage.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_preset.Plo + -rm -f ./$(DEPDIR)/liblzma_la-fastpos_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-file_info.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_buffer_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_flags_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_flags_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-hardware_cputhreads.Plo + -rm -f ./$(DEPDIR)/liblzma_la-hardware_physmem.Plo + -rm -f ./$(DEPDIR)/liblzma_la-ia64.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index_hash.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lz_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lz_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lz_encoder_mf.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzip_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma2_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma2_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder_presets.Plo + -rm -f ./$(DEPDIR)/liblzma_la-microlzma_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-microlzma_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-outqueue.Plo + -rm -f ./$(DEPDIR)/liblzma_la-powerpc.Plo + -rm -f ./$(DEPDIR)/liblzma_la-price_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-sha256.Plo + -rm -f ./$(DEPDIR)/liblzma_la-simple_coder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-simple_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-simple_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-sparc.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_buffer_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_decoder_mt.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_encoder_mt.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_flags_common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_flags_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_flags_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-string_conversion.Plo + -rm -f ./$(DEPDIR)/liblzma_la-tuklib_cpucores.Plo + -rm -f ./$(DEPDIR)/liblzma_la-tuklib_physmem.Plo + -rm -f ./$(DEPDIR)/liblzma_la-vli_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-vli_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-vli_size.Plo + -rm -f ./$(DEPDIR)/liblzma_la-x86.Plo + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-docDATA install-pkgconfigDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: install-libLTLIBRARIES + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f ./$(DEPDIR)/liblzma_la-alone_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-alone_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-arm.Plo + -rm -f ./$(DEPDIR)/liblzma_la-arm64.Plo + -rm -f ./$(DEPDIR)/liblzma_la-armthumb.Plo + -rm -f ./$(DEPDIR)/liblzma_la-auto_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_buffer_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_header_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_header_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-block_util.Plo + -rm -f ./$(DEPDIR)/liblzma_la-check.Plo + -rm -f ./$(DEPDIR)/liblzma_la-common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_fast.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_small.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc32_x86.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_fast.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_small.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-crc64_x86.Plo + -rm -f ./$(DEPDIR)/liblzma_la-delta_common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-delta_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-delta_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_decoder_memusage.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_encoder_memusage.Plo + -rm -f ./$(DEPDIR)/liblzma_la-easy_preset.Plo + -rm -f ./$(DEPDIR)/liblzma_la-fastpos_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-file_info.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_buffer_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_flags_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-filter_flags_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-hardware_cputhreads.Plo + -rm -f ./$(DEPDIR)/liblzma_la-hardware_physmem.Plo + -rm -f ./$(DEPDIR)/liblzma_la-ia64.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-index_hash.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lz_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lz_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lz_encoder_mf.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzip_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma2_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma2_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_fast.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder_optimum_normal.Plo + -rm -f ./$(DEPDIR)/liblzma_la-lzma_encoder_presets.Plo + -rm -f ./$(DEPDIR)/liblzma_la-microlzma_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-microlzma_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-outqueue.Plo + -rm -f ./$(DEPDIR)/liblzma_la-powerpc.Plo + -rm -f ./$(DEPDIR)/liblzma_la-price_table.Plo + -rm -f ./$(DEPDIR)/liblzma_la-sha256.Plo + -rm -f ./$(DEPDIR)/liblzma_la-simple_coder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-simple_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-simple_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-sparc.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_buffer_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_buffer_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_decoder_mt.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_encoder_mt.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_flags_common.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_flags_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-stream_flags_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-string_conversion.Plo + -rm -f ./$(DEPDIR)/liblzma_la-tuklib_cpucores.Plo + -rm -f ./$(DEPDIR)/liblzma_la-tuklib_physmem.Plo + -rm -f ./$(DEPDIR)/liblzma_la-vli_decoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-vli_encoder.Plo + -rm -f ./$(DEPDIR)/liblzma_la-vli_size.Plo + -rm -f ./$(DEPDIR)/liblzma_la-x86.Plo + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-docDATA uninstall-libLTLIBRARIES \ + uninstall-pkgconfigDATA + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--depfiles check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool clean-local cscopelist-am \ + ctags ctags-am distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-docDATA install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-libLTLIBRARIES \ + install-man install-pdf install-pdf-am install-pkgconfigDATA \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-am uninstall uninstall-am uninstall-docDATA \ + uninstall-libLTLIBRARIES uninstall-pkgconfigDATA + +.PRECIOUS: Makefile + + +# Windows resource compiler support. libtool knows what to do with .rc +# files, but Automake (<= 1.11 at least) doesn't know. +# +# We want the resource file only in shared liblzma. To avoid linking it into +# static liblzma, we overwrite the static object file with an object file +# compiled from empty input. Note that GNU-specific features are OK here, +# because on Windows we are compiled with the GNU toolchain. +.rc.lo: + $(LIBTOOL) --mode=compile $(RC) $(DEFS) $(DEFAULT_INCLUDES) \ + $(INCLUDES) $(liblzma_la_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) \ + -i $< -o $@ + echo > empty.c + $(COMPILE) -c empty.c -o $(*D)/$(*F).o + +# Remove ordinals from the generated .def file. People must link by name, +# not by ordinal, because no one is going to track the ordinal numbers. +liblzma.def: liblzma.la liblzma.def.in + sed 's/ \+@ *[0-9]\+//' liblzma.def.in > liblzma.def + +# Creating liblzma.def.in is a side effect of linking the library. +liblzma.def.in: liblzma.la + +liblzma.pc: $(srcdir)/liblzma.pc.in + $(AM_V_at)rm -f $@ + $(pc_verbose)sed \ + -e 's,@prefix[@],$(prefix),g' \ + -e 's,@exec_prefix[@],$(exec_prefix),g' \ + -e 's,@libdir[@],$(libdir),g' \ + -e 's,@includedir[@],$(includedir),g' \ + -e 's,@PACKAGE_URL[@],$(PACKAGE_URL),g' \ + -e 's,@PACKAGE_VERSION[@],$(PACKAGE_VERSION),g' \ + -e 's,@PTHREAD_CFLAGS[@],$(PTHREAD_CFLAGS),g' \ + -e 's,@LIBS[@],$(LIBS),g' \ + < $(srcdir)/liblzma.pc.in > $@ || { rm -f $@; exit 1; } + +clean-local: + rm -f liblzma.pc + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/liblzma/api/Makefile.am b/src/liblzma/api/Makefile.am new file mode 100644 index 0000000..db24600 --- /dev/null +++ b/src/liblzma/api/Makefile.am @@ -0,0 +1,23 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +nobase_include_HEADERS = \ + lzma.h \ + lzma/base.h \ + lzma/bcj.h \ + lzma/block.h \ + lzma/check.h \ + lzma/container.h \ + lzma/delta.h \ + lzma/filter.h \ + lzma/hardware.h \ + lzma/index.h \ + lzma/index_hash.h \ + lzma/lzma12.h \ + lzma/stream_flags.h \ + lzma/version.h \ + lzma/vli.h diff --git a/src/liblzma/api/Makefile.in b/src/liblzma/api/Makefile.in new file mode 100644 index 0000000..ea5cfd6 --- /dev/null +++ b/src/liblzma/api/Makefile.in @@ -0,0 +1,630 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = src/liblzma/api +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_capsicum.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/getopt.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/posix-shell.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/tuklib_common.m4 \ + $(top_srcdir)/m4/tuklib_cpucores.m4 \ + $(top_srcdir)/m4/tuklib_integer.m4 \ + $(top_srcdir)/m4/tuklib_mbstr.m4 \ + $(top_srcdir)/m4/tuklib_physmem.m4 \ + $(top_srcdir)/m4/tuklib_progname.m4 \ + $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(nobase_include_HEADERS) \ + $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(includedir)" +HEADERS = $(nobase_include_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAPSICUM_LIB = @CAPSICUM_LIB@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +GETOPT_H = @GETOPT_H@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +HAVE_VISIBILITY = @HAVE_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_EXEEXT = @LN_EXEEXT@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ +POSUB = @POSUB@ +PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +enable_path_for_scripts = @enable_path_for_scripts@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xz = @xz@ +nobase_include_HEADERS = \ + lzma.h \ + lzma/base.h \ + lzma/bcj.h \ + lzma/block.h \ + lzma/check.h \ + lzma/container.h \ + lzma/delta.h \ + lzma/filter.h \ + lzma/hardware.h \ + lzma/index.h \ + lzma/index_hash.h \ + lzma/lzma12.h \ + lzma/stream_flags.h \ + lzma/version.h \ + lzma/vli.h + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/liblzma/api/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign src/liblzma/api/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-nobase_includeHEADERS: $(nobase_include_HEADERS) + @$(NORMAL_INSTALL) + @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ + fi; \ + $(am__nobase_list) | while read dir files; do \ + xfiles=; for file in $$files; do \ + if test -f "$$file"; then xfiles="$$xfiles $$file"; \ + else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ + test -z "$$xfiles" || { \ + test "x$$dir" = x. || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \ + $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \ + echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \ + $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \ + done + +uninstall-nobase_includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \ + $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ + dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(HEADERS) +installdirs: + for dir in "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-nobase_includeHEADERS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-nobase_includeHEADERS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ + clean-libtool cscopelist-am ctags ctags-am distclean \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man \ + install-nobase_includeHEADERS install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-nobase_includeHEADERS + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/liblzma/api/lzma.h b/src/liblzma/api/lzma.h new file mode 100644 index 0000000..8fbd9a8 --- /dev/null +++ b/src/liblzma/api/lzma.h @@ -0,0 +1,327 @@ +/** + * \file api/lzma.h + * \brief The public API of liblzma data compression library + * + * liblzma is a public domain general-purpose data compression library with + * a zlib-like API. The native file format is .xz, but also the old .lzma + * format and raw (no headers) streams are supported. Multiple compression + * algorithms (filters) are supported. Currently LZMA2 is the primary filter. + * + * liblzma is part of XZ Utils . XZ Utils includes + * a gzip-like command line tool named xz and some other tools. XZ Utils + * is developed and maintained by Lasse Collin. + * + * Major parts of liblzma are based on Igor Pavlov's public domain LZMA SDK + * . + * + * The SHA-256 implementation is based on the public domain code found from + * 7-Zip , which has a modified version of the public + * domain SHA-256 code found from Crypto++ . + * The SHA-256 code in Crypto++ was written by Kevin Springle and Wei Dai. + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#ifndef LZMA_H +#define LZMA_H + +/***************************** + * Required standard headers * + *****************************/ + +/* + * liblzma API headers need some standard types and macros. To allow + * including lzma.h without requiring the application to include other + * headers first, lzma.h includes the required standard headers unless + * they already seem to be included already or if LZMA_MANUAL_HEADERS + * has been defined. + * + * Here's what types and macros are needed and from which headers: + * - stddef.h: size_t, NULL + * - stdint.h: uint8_t, uint32_t, uint64_t, UINT32_C(n), uint64_C(n), + * UINT32_MAX, UINT64_MAX + * + * However, inttypes.h is a little more portable than stdint.h, although + * inttypes.h declares some unneeded things compared to plain stdint.h. + * + * The hacks below aren't perfect, specifically they assume that inttypes.h + * exists and that it typedefs at least uint8_t, uint32_t, and uint64_t, + * and that, in case of incomplete inttypes.h, unsigned int is 32-bit. + * If the application already takes care of setting up all the types and + * macros properly (for example by using gnulib's stdint.h or inttypes.h), + * we try to detect that the macros are already defined and don't include + * inttypes.h here again. However, you may define LZMA_MANUAL_HEADERS to + * force this file to never include any system headers. + * + * Some could argue that liblzma API should provide all the required types, + * for example lzma_uint64, LZMA_UINT64_C(n), and LZMA_UINT64_MAX. This was + * seen as an unnecessary mess, since most systems already provide all the + * necessary types and macros in the standard headers. + * + * Note that liblzma API still has lzma_bool, because using stdbool.h would + * break C89 and C++ programs on many systems. sizeof(bool) in C99 isn't + * necessarily the same as sizeof(bool) in C++. + */ + +#ifndef LZMA_MANUAL_HEADERS + /* + * I suppose this works portably also in C++. Note that in C++, + * we need to get size_t into the global namespace. + */ +# include + + /* + * Skip inttypes.h if we already have all the required macros. If we + * have the macros, we assume that we have the matching typedefs too. + */ +# if !defined(UINT32_C) || !defined(UINT64_C) \ + || !defined(UINT32_MAX) || !defined(UINT64_MAX) + /* + * MSVC versions older than 2013 have no C99 support, and + * thus they cannot be used to compile liblzma. Using an + * existing liblzma.dll with old MSVC can work though(*), + * but we need to define the required standard integer + * types here in a MSVC-specific way. + * + * (*) If you do this, the existing liblzma.dll probably uses + * a different runtime library than your MSVC-built + * application. Mixing runtimes is generally bad, but + * in this case it should work as long as you avoid + * the few rarely-needed liblzma functions that allocate + * memory and expect the caller to free it using free(). + */ +# if defined(_WIN32) && defined(_MSC_VER) && _MSC_VER < 1800 + typedef unsigned __int8 uint8_t; + typedef unsigned __int32 uint32_t; + typedef unsigned __int64 uint64_t; +# else + /* Use the standard inttypes.h. */ +# ifdef __cplusplus + /* + * C99 sections 7.18.2 and 7.18.4 specify + * that C++ implementations define the limit + * and constant macros only if specifically + * requested. Note that if you want the + * format macros (PRIu64 etc.) too, you need + * to define __STDC_FORMAT_MACROS before + * including lzma.h, since re-including + * inttypes.h with __STDC_FORMAT_MACROS + * defined doesn't necessarily work. + */ +# ifndef __STDC_LIMIT_MACROS +# define __STDC_LIMIT_MACROS 1 +# endif +# ifndef __STDC_CONSTANT_MACROS +# define __STDC_CONSTANT_MACROS 1 +# endif +# endif + +# include +# endif + + /* + * Some old systems have only the typedefs in inttypes.h, and + * lack all the macros. For those systems, we need a few more + * hacks. We assume that unsigned int is 32-bit and unsigned + * long is either 32-bit or 64-bit. If these hacks aren't + * enough, the application has to setup the types manually + * before including lzma.h. + */ +# ifndef UINT32_C +# if defined(_WIN32) && defined(_MSC_VER) +# define UINT32_C(n) n ## UI32 +# else +# define UINT32_C(n) n ## U +# endif +# endif + +# ifndef UINT64_C +# if defined(_WIN32) && defined(_MSC_VER) +# define UINT64_C(n) n ## UI64 +# else + /* Get ULONG_MAX. */ +# include +# if ULONG_MAX == 4294967295UL +# define UINT64_C(n) n ## ULL +# else +# define UINT64_C(n) n ## UL +# endif +# endif +# endif + +# ifndef UINT32_MAX +# define UINT32_MAX (UINT32_C(4294967295)) +# endif + +# ifndef UINT64_MAX +# define UINT64_MAX (UINT64_C(18446744073709551615)) +# endif +# endif +#endif /* ifdef LZMA_MANUAL_HEADERS */ + + +/****************** + * LZMA_API macro * + ******************/ + +/* + * Some systems require that the functions and function pointers are + * declared specially in the headers. LZMA_API_IMPORT is for importing + * symbols and LZMA_API_CALL is to specify the calling convention. + * + * By default it is assumed that the application will link dynamically + * against liblzma. #define LZMA_API_STATIC in your application if you + * want to link against static liblzma. If you don't care about portability + * to operating systems like Windows, or at least don't care about linking + * against static liblzma on them, don't worry about LZMA_API_STATIC. That + * is, most developers will never need to use LZMA_API_STATIC. + * + * The GCC variants are a special case on Windows (Cygwin and MinGW). + * We rely on GCC doing the right thing with its auto-import feature, + * and thus don't use __declspec(dllimport). This way developers don't + * need to worry about LZMA_API_STATIC. Also the calling convention is + * omitted on Cygwin but not on MinGW. + */ +#ifndef LZMA_API_IMPORT +# if !defined(LZMA_API_STATIC) && defined(_WIN32) && !defined(__GNUC__) +# define LZMA_API_IMPORT __declspec(dllimport) +# else +# define LZMA_API_IMPORT +# endif +#endif + +#ifndef LZMA_API_CALL +# if defined(_WIN32) && !defined(__CYGWIN__) +# define LZMA_API_CALL __cdecl +# else +# define LZMA_API_CALL +# endif +#endif + +#ifndef LZMA_API +# define LZMA_API(type) LZMA_API_IMPORT type LZMA_API_CALL +#endif + + +/*********** + * nothrow * + ***********/ + +/* + * None of the functions in liblzma may throw an exception. Even + * the functions that use callback functions won't throw exceptions, + * because liblzma would break if a callback function threw an exception. + */ +#ifndef lzma_nothrow +# if defined(__cplusplus) +# if __cplusplus >= 201103L || (defined(_MSVC_LANG) \ + && _MSVC_LANG >= 201103L) +# define lzma_nothrow noexcept +# else +# define lzma_nothrow throw() +# endif +# elif defined(__GNUC__) && (__GNUC__ > 3 \ + || (__GNUC__ == 3 && __GNUC_MINOR__ >= 3)) +# define lzma_nothrow __attribute__((__nothrow__)) +# else +# define lzma_nothrow +# endif +#endif + + +/******************** + * GNU C extensions * + ********************/ + +/* + * GNU C extensions are used conditionally in the public API. It doesn't + * break anything if these are sometimes enabled and sometimes not, only + * affects warnings and optimizations. + */ +#if defined(__GNUC__) && __GNUC__ >= 3 +# ifndef lzma_attribute +# define lzma_attribute(attr) __attribute__(attr) +# endif + + /* warn_unused_result was added in GCC 3.4. */ +# ifndef lzma_attr_warn_unused_result +# if __GNUC__ == 3 && __GNUC_MINOR__ < 4 +# define lzma_attr_warn_unused_result +# endif +# endif + +#else +# ifndef lzma_attribute +# define lzma_attribute(attr) +# endif +#endif + + +#ifndef lzma_attr_pure +# define lzma_attr_pure lzma_attribute((__pure__)) +#endif + +#ifndef lzma_attr_const +# define lzma_attr_const lzma_attribute((__const__)) +#endif + +#ifndef lzma_attr_warn_unused_result +# define lzma_attr_warn_unused_result \ + lzma_attribute((__warn_unused_result__)) +#endif + + +/************** + * Subheaders * + **************/ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Subheaders check that this is defined. It is to prevent including + * them directly from applications. + */ +#define LZMA_H_INTERNAL 1 + +/* Basic features */ +#include "lzma/version.h" +#include "lzma/base.h" +#include "lzma/vli.h" +#include "lzma/check.h" + +/* Filters */ +#include "lzma/filter.h" +#include "lzma/bcj.h" +#include "lzma/delta.h" +#include "lzma/lzma12.h" + +/* Container formats */ +#include "lzma/container.h" + +/* Advanced features */ +#include "lzma/stream_flags.h" +#include "lzma/block.h" +#include "lzma/index.h" +#include "lzma/index_hash.h" + +/* Hardware information */ +#include "lzma/hardware.h" + +/* + * All subheaders included. Undefine LZMA_H_INTERNAL to prevent applications + * re-including the subheaders. + */ +#undef LZMA_H_INTERNAL + +#ifdef __cplusplus +} +#endif + +#endif /* ifndef LZMA_H */ diff --git a/src/liblzma/api/lzma/base.h b/src/liblzma/api/lzma/base.h new file mode 100644 index 0000000..ff2d869 --- /dev/null +++ b/src/liblzma/api/lzma/base.h @@ -0,0 +1,712 @@ +/** + * \file lzma/base.h + * \brief Data types and functions used in many places in liblzma API + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Boolean + * + * This is here because C89 doesn't have stdbool.h. To set a value for + * variables having type lzma_bool, you can use + * - C99's `true' and `false' from stdbool.h; + * - C++'s internal `true' and `false'; or + * - integers one (true) and zero (false). + */ +typedef unsigned char lzma_bool; + + +/** + * \brief Type of reserved enumeration variable in structures + * + * To avoid breaking library ABI when new features are added, several + * structures contain extra variables that may be used in future. Since + * sizeof(enum) can be different than sizeof(int), and sizeof(enum) may + * even vary depending on the range of enumeration constants, we specify + * a separate type to be used for reserved enumeration variables. All + * enumeration constants in liblzma API will be non-negative and less + * than 128, which should guarantee that the ABI won't break even when + * new constants are added to existing enumerations. + */ +typedef enum { + LZMA_RESERVED_ENUM = 0 +} lzma_reserved_enum; + + +/** + * \brief Return values used by several functions in liblzma + * + * Check the descriptions of specific functions to find out which return + * values they can return. With some functions the return values may have + * more specific meanings than described here; those differences are + * described per-function basis. + */ +typedef enum { + LZMA_OK = 0, + /**< + * \brief Operation completed successfully + */ + + LZMA_STREAM_END = 1, + /**< + * \brief End of stream was reached + * + * In encoder, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, or + * LZMA_FINISH was finished. In decoder, this indicates + * that all the data was successfully decoded. + * + * In all cases, when LZMA_STREAM_END is returned, the last + * output bytes should be picked from strm->next_out. + */ + + LZMA_NO_CHECK = 2, + /**< + * \brief Input stream has no integrity check + * + * This return value can be returned only if the + * LZMA_TELL_NO_CHECK flag was used when initializing + * the decoder. LZMA_NO_CHECK is just a warning, and + * the decoding can be continued normally. + * + * It is possible to call lzma_get_check() immediately after + * lzma_code has returned LZMA_NO_CHECK. The result will + * naturally be LZMA_CHECK_NONE, but the possibility to call + * lzma_get_check() may be convenient in some applications. + */ + + LZMA_UNSUPPORTED_CHECK = 3, + /**< + * \brief Cannot calculate the integrity check + * + * The usage of this return value is different in encoders + * and decoders. + * + * Encoders can return this value only from the initialization + * function. If initialization fails with this value, the + * encoding cannot be done, because there's no way to produce + * output with the correct integrity check. + * + * Decoders can return this value only from lzma_code() and + * only if the LZMA_TELL_UNSUPPORTED_CHECK flag was used when + * initializing the decoder. The decoding can still be + * continued normally even if the check type is unsupported, + * but naturally the check will not be validated, and possible + * errors may go undetected. + * + * With decoder, it is possible to call lzma_get_check() + * immediately after lzma_code() has returned + * LZMA_UNSUPPORTED_CHECK. This way it is possible to find + * out what the unsupported Check ID was. + */ + + LZMA_GET_CHECK = 4, + /**< + * \brief Integrity check type is now available + * + * This value can be returned only by the lzma_code() function + * and only if the decoder was initialized with the + * LZMA_TELL_ANY_CHECK flag. LZMA_GET_CHECK tells the + * application that it may now call lzma_get_check() to find + * out the Check ID. This can be used, for example, to + * implement a decoder that accepts only files that have + * strong enough integrity check. + */ + + LZMA_MEM_ERROR = 5, + /**< + * \brief Cannot allocate memory + * + * Memory allocation failed, or the size of the allocation + * would be greater than SIZE_MAX. + * + * Due to internal implementation reasons, the coding cannot + * be continued even if more memory were made available after + * LZMA_MEM_ERROR. + */ + + LZMA_MEMLIMIT_ERROR = 6, + /** + * \brief Memory usage limit was reached + * + * Decoder would need more memory than allowed by the + * specified memory usage limit. To continue decoding, + * the memory usage limit has to be increased with + * lzma_memlimit_set(). + * + * liblzma 5.2.6 and earlier had a bug in single-threaded .xz + * decoder (lzma_stream_decoder()) which made it impossible + * to continue decoding after LZMA_MEMLIMIT_ERROR even if + * the limit was increased using lzma_memlimit_set(). + * Other decoders worked correctly. + */ + + LZMA_FORMAT_ERROR = 7, + /**< + * \brief File format not recognized + * + * The decoder did not recognize the input as supported file + * format. This error can occur, for example, when trying to + * decode .lzma format file with lzma_stream_decoder, + * because lzma_stream_decoder accepts only the .xz format. + */ + + LZMA_OPTIONS_ERROR = 8, + /**< + * \brief Invalid or unsupported options + * + * Invalid or unsupported options, for example + * - unsupported filter(s) or filter options; or + * - reserved bits set in headers (decoder only). + * + * Rebuilding liblzma with more features enabled, or + * upgrading to a newer version of liblzma may help. + */ + + LZMA_DATA_ERROR = 9, + /**< + * \brief Data is corrupt + * + * The usage of this return value is different in encoders + * and decoders. In both encoder and decoder, the coding + * cannot continue after this error. + * + * Encoders return this if size limits of the target file + * format would be exceeded. These limits are huge, thus + * getting this error from an encoder is mostly theoretical. + * For example, the maximum compressed and uncompressed + * size of a .xz Stream is roughly 8 EiB (2^63 bytes). + * + * Decoders return this error if the input data is corrupt. + * This can mean, for example, invalid CRC32 in headers + * or invalid check of uncompressed data. + */ + + LZMA_BUF_ERROR = 10, + /**< + * \brief No progress is possible + * + * This error code is returned when the coder cannot consume + * any new input and produce any new output. The most common + * reason for this error is that the input stream being + * decoded is truncated or corrupt. + * + * This error is not fatal. Coding can be continued normally + * by providing more input and/or more output space, if + * possible. + * + * Typically the first call to lzma_code() that can do no + * progress returns LZMA_OK instead of LZMA_BUF_ERROR. Only + * the second consecutive call doing no progress will return + * LZMA_BUF_ERROR. This is intentional. + * + * With zlib, Z_BUF_ERROR may be returned even if the + * application is doing nothing wrong, so apps will need + * to handle Z_BUF_ERROR specially. The above hack + * guarantees that liblzma never returns LZMA_BUF_ERROR + * to properly written applications unless the input file + * is truncated or corrupt. This should simplify the + * applications a little. + */ + + LZMA_PROG_ERROR = 11, + /**< + * \brief Programming error + * + * This indicates that the arguments given to the function are + * invalid or the internal state of the decoder is corrupt. + * - Function arguments are invalid or the structures + * pointed by the argument pointers are invalid + * e.g. if strm->next_out has been set to NULL and + * strm->avail_out > 0 when calling lzma_code(). + * - lzma_* functions have been called in wrong order + * e.g. lzma_code() was called right after lzma_end(). + * - If errors occur randomly, the reason might be flaky + * hardware. + * + * If you think that your code is correct, this error code + * can be a sign of a bug in liblzma. See the documentation + * how to report bugs. + */ + + LZMA_SEEK_NEEDED = 12, + /**< + * \brief Request to change the input file position + * + * Some coders can do random access in the input file. The + * initialization functions of these coders take the file size + * as an argument. No other coders can return LZMA_SEEK_NEEDED. + * + * When this value is returned, the application must seek to + * the file position given in lzma_stream.seek_pos. This value + * is guaranteed to never exceed the file size that was + * specified at the coder initialization. + * + * After seeking the application should read new input and + * pass it normally via lzma_stream.next_in and .avail_in. + */ + + /* + * These eumerations may be used internally by liblzma + * but they will never be returned to applications. + */ + LZMA_RET_INTERNAL1 = 101, + LZMA_RET_INTERNAL2 = 102, + LZMA_RET_INTERNAL3 = 103, + LZMA_RET_INTERNAL4 = 104, + LZMA_RET_INTERNAL5 = 105, + LZMA_RET_INTERNAL6 = 106, + LZMA_RET_INTERNAL7 = 107, + LZMA_RET_INTERNAL8 = 108 +} lzma_ret; + + +/** + * \brief The `action' argument for lzma_code() + * + * After the first use of LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, LZMA_FULL_BARRIER, + * or LZMA_FINISH, the same `action' must is used until lzma_code() returns + * LZMA_STREAM_END. Also, the amount of input (that is, strm->avail_in) must + * not be modified by the application until lzma_code() returns + * LZMA_STREAM_END. Changing the `action' or modifying the amount of input + * will make lzma_code() return LZMA_PROG_ERROR. + */ +typedef enum { + LZMA_RUN = 0, + /**< + * \brief Continue coding + * + * Encoder: Encode as much input as possible. Some internal + * buffering will probably be done (depends on the filter + * chain in use), which causes latency: the input used won't + * usually be decodeable from the output of the same + * lzma_code() call. + * + * Decoder: Decode as much input as possible and produce as + * much output as possible. + */ + + LZMA_SYNC_FLUSH = 1, + /**< + * \brief Make all the input available at output + * + * Normally the encoder introduces some latency. + * LZMA_SYNC_FLUSH forces all the buffered data to be + * available at output without resetting the internal + * state of the encoder. This way it is possible to use + * compressed stream for example for communication over + * network. + * + * Only some filters support LZMA_SYNC_FLUSH. Trying to use + * LZMA_SYNC_FLUSH with filters that don't support it will + * make lzma_code() return LZMA_OPTIONS_ERROR. For example, + * LZMA1 doesn't support LZMA_SYNC_FLUSH but LZMA2 does. + * + * Using LZMA_SYNC_FLUSH very often can dramatically reduce + * the compression ratio. With some filters (for example, + * LZMA2), fine-tuning the compression options may help + * mitigate this problem significantly (for example, + * match finder with LZMA2). + * + * Decoders don't support LZMA_SYNC_FLUSH. + */ + + LZMA_FULL_FLUSH = 2, + /**< + * \brief Finish encoding of the current Block + * + * All the input data going to the current Block must have + * been given to the encoder (the last bytes can still be + * pending in *next_in). Call lzma_code() with LZMA_FULL_FLUSH + * until it returns LZMA_STREAM_END. Then continue normally + * with LZMA_RUN or finish the Stream with LZMA_FINISH. + * + * This action is currently supported only by Stream encoder + * and easy encoder (which uses Stream encoder). If there is + * no unfinished Block, no empty Block is created. + */ + + LZMA_FULL_BARRIER = 4, + /**< + * \brief Finish encoding of the current Block + * + * This is like LZMA_FULL_FLUSH except that this doesn't + * necessarily wait until all the input has been made + * available via the output buffer. That is, lzma_code() + * might return LZMA_STREAM_END as soon as all the input + * has been consumed (avail_in == 0). + * + * LZMA_FULL_BARRIER is useful with a threaded encoder if + * one wants to split the .xz Stream into Blocks at specific + * offsets but doesn't care if the output isn't flushed + * immediately. Using LZMA_FULL_BARRIER allows keeping + * the threads busy while LZMA_FULL_FLUSH would make + * lzma_code() wait until all the threads have finished + * until more data could be passed to the encoder. + * + * With a lzma_stream initialized with the single-threaded + * lzma_stream_encoder() or lzma_easy_encoder(), + * LZMA_FULL_BARRIER is an alias for LZMA_FULL_FLUSH. + */ + + LZMA_FINISH = 3 + /**< + * \brief Finish the coding operation + * + * All the input data must have been given to the encoder + * (the last bytes can still be pending in next_in). + * Call lzma_code() with LZMA_FINISH until it returns + * LZMA_STREAM_END. Once LZMA_FINISH has been used, + * the amount of input must no longer be changed by + * the application. + * + * When decoding, using LZMA_FINISH is optional unless the + * LZMA_CONCATENATED flag was used when the decoder was + * initialized. When LZMA_CONCATENATED was not used, the only + * effect of LZMA_FINISH is that the amount of input must not + * be changed just like in the encoder. + */ +} lzma_action; + + +/** + * \brief Custom functions for memory handling + * + * A pointer to lzma_allocator may be passed via lzma_stream structure + * to liblzma, and some advanced functions take a pointer to lzma_allocator + * as a separate function argument. The library will use the functions + * specified in lzma_allocator for memory handling instead of the default + * malloc() and free(). C++ users should note that the custom memory + * handling functions must not throw exceptions. + * + * Single-threaded mode only: liblzma doesn't make an internal copy of + * lzma_allocator. Thus, it is OK to change these function pointers in + * the middle of the coding process, but obviously it must be done + * carefully to make sure that the replacement `free' can deallocate + * memory allocated by the earlier `alloc' function(s). + * + * Multithreaded mode: liblzma might internally store pointers to the + * lzma_allocator given via the lzma_stream structure. The application + * must not change the allocator pointer in lzma_stream or the contents + * of the pointed lzma_allocator structure until lzma_end() has been used + * to free the memory associated with that lzma_stream. The allocation + * functions might be called simultaneously from multiple threads, and + * thus they must be thread safe. + */ +typedef struct { + /** + * \brief Pointer to a custom memory allocation function + * + * If you don't want a custom allocator, but still want + * custom free(), set this to NULL and liblzma will use + * the standard malloc(). + * + * \param opaque lzma_allocator.opaque (see below) + * \param nmemb Number of elements like in calloc(). liblzma + * will always set nmemb to 1, so it is safe to + * ignore nmemb in a custom allocator if you like. + * The nmemb argument exists only for + * compatibility with zlib and libbzip2. + * \param size Size of an element in bytes. + * liblzma never sets this to zero. + * + * \return Pointer to the beginning of a memory block of + * `size' bytes, or NULL if allocation fails + * for some reason. When allocation fails, functions + * of liblzma return LZMA_MEM_ERROR. + * + * The allocator should not waste time zeroing the allocated buffers. + * This is not only about speed, but also memory usage, since the + * operating system kernel doesn't necessarily allocate the requested + * memory in physical memory until it is actually used. With small + * input files, liblzma may actually need only a fraction of the + * memory that it requested for allocation. + * + * \note LZMA_MEM_ERROR is also used when the size of the + * allocation would be greater than SIZE_MAX. Thus, + * don't assume that the custom allocator must have + * returned NULL if some function from liblzma + * returns LZMA_MEM_ERROR. + */ + void *(LZMA_API_CALL *alloc)(void *opaque, size_t nmemb, size_t size); + + /** + * \brief Pointer to a custom memory freeing function + * + * If you don't want a custom freeing function, but still + * want a custom allocator, set this to NULL and liblzma + * will use the standard free(). + * + * \param opaque lzma_allocator.opaque (see below) + * \param ptr Pointer returned by lzma_allocator.alloc(), + * or when it is set to NULL, a pointer returned + * by the standard malloc(). + */ + void (LZMA_API_CALL *free)(void *opaque, void *ptr); + + /** + * \brief Pointer passed to .alloc() and .free() + * + * opaque is passed as the first argument to lzma_allocator.alloc() + * and lzma_allocator.free(). This intended to ease implementing + * custom memory allocation functions for use with liblzma. + * + * If you don't need this, you should set this to NULL. + */ + void *opaque; + +} lzma_allocator; + + +/** + * \brief Internal data structure + * + * The contents of this structure is not visible outside the library. + */ +typedef struct lzma_internal_s lzma_internal; + + +/** + * \brief Passing data to and from liblzma + * + * The lzma_stream structure is used for + * - passing pointers to input and output buffers to liblzma; + * - defining custom memory handler functions; and + * - holding a pointer to coder-specific internal data structures. + * + * Typical usage: + * + * - After allocating lzma_stream (on stack or with malloc()), it must be + * initialized to LZMA_STREAM_INIT (see LZMA_STREAM_INIT for details). + * + * - Initialize a coder to the lzma_stream, for example by using + * lzma_easy_encoder() or lzma_auto_decoder(). Some notes: + * - In contrast to zlib, strm->next_in and strm->next_out are + * ignored by all initialization functions, thus it is safe + * to not initialize them yet. + * - The initialization functions always set strm->total_in and + * strm->total_out to zero. + * - If the initialization function fails, no memory is left allocated + * that would require freeing with lzma_end() even if some memory was + * associated with the lzma_stream structure when the initialization + * function was called. + * + * - Use lzma_code() to do the actual work. + * + * - Once the coding has been finished, the existing lzma_stream can be + * reused. It is OK to reuse lzma_stream with different initialization + * function without calling lzma_end() first. Old allocations are + * automatically freed. + * + * - Finally, use lzma_end() to free the allocated memory. lzma_end() never + * frees the lzma_stream structure itself. + * + * Application may modify the values of total_in and total_out as it wants. + * They are updated by liblzma to match the amount of data read and + * written but aren't used for anything else except as a possible return + * values from lzma_get_progress(). + */ +typedef struct { + const uint8_t *next_in; /**< Pointer to the next input byte. */ + size_t avail_in; /**< Number of available input bytes in next_in. */ + uint64_t total_in; /**< Total number of bytes read by liblzma. */ + + uint8_t *next_out; /**< Pointer to the next output position. */ + size_t avail_out; /**< Amount of free space in next_out. */ + uint64_t total_out; /**< Total number of bytes written by liblzma. */ + + /** + * \brief Custom memory allocation functions + * + * In most cases this is NULL which makes liblzma use + * the standard malloc() and free(). + * + * \note In 5.0.x this is not a const pointer. + */ + const lzma_allocator *allocator; + + /** Internal state is not visible to applications. */ + lzma_internal *internal; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. Excluding the initialization of this structure, + * you should not touch these, because the names of these variables + * may change. + */ + void *reserved_ptr1; + void *reserved_ptr2; + void *reserved_ptr3; + void *reserved_ptr4; + + /** + * \brief New seek input position for LZMA_SEEK_NEEDED + * + * When lzma_code() returns LZMA_SEEK_NEEDED, the new input position + * needed by liblzma will be available seek_pos. The value is + * guaranteed to not exceed the file size that was specified when + * this lzma_stream was initialized. + * + * In all other situations the value of this variable is undefined. + */ + uint64_t seek_pos; + + uint64_t reserved_int2; + size_t reserved_int3; + size_t reserved_int4; + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + +} lzma_stream; + + +/** + * \brief Initialization for lzma_stream + * + * When you declare an instance of lzma_stream, you can immediately + * initialize it so that initialization functions know that no memory + * has been allocated yet: + * + * lzma_stream strm = LZMA_STREAM_INIT; + * + * If you need to initialize a dynamically allocated lzma_stream, you can use + * memset(strm_pointer, 0, sizeof(lzma_stream)). Strictly speaking, this + * violates the C standard since NULL may have different internal + * representation than zero, but it should be portable enough in practice. + * Anyway, for maximum portability, you can use something like this: + * + * lzma_stream tmp = LZMA_STREAM_INIT; + * *strm = tmp; + */ +#define LZMA_STREAM_INIT \ + { NULL, 0, 0, NULL, 0, 0, NULL, NULL, \ + NULL, NULL, NULL, NULL, 0, 0, 0, 0, \ + LZMA_RESERVED_ENUM, LZMA_RESERVED_ENUM } + + +/** + * \brief Encode or decode data + * + * Once the lzma_stream has been successfully initialized (e.g. with + * lzma_stream_encoder()), the actual encoding or decoding is done + * using this function. The application has to update strm->next_in, + * strm->avail_in, strm->next_out, and strm->avail_out to pass input + * to and get output from liblzma. + * + * See the description of the coder-specific initialization function to find + * out what `action' values are supported by the coder. + */ +extern LZMA_API(lzma_ret) lzma_code(lzma_stream *strm, lzma_action action) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Free memory allocated for the coder data structures + * + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * + * After lzma_end(strm), strm->internal is guaranteed to be NULL. No other + * members of the lzma_stream structure are touched. + * + * \note zlib indicates an error if application end()s unfinished + * stream structure. liblzma doesn't do this, and assumes that + * application knows what it is doing. + */ +extern LZMA_API(void) lzma_end(lzma_stream *strm) lzma_nothrow; + + +/** + * \brief Get progress information + * + * In single-threaded mode, applications can get progress information from + * strm->total_in and strm->total_out. In multi-threaded mode this is less + * useful because a significant amount of both input and output data gets + * buffered internally by liblzma. This makes total_in and total_out give + * misleading information and also makes the progress indicator updates + * non-smooth. + * + * This function gives realistic progress information also in multi-threaded + * mode by taking into account the progress made by each thread. In + * single-threaded mode *progress_in and *progress_out are set to + * strm->total_in and strm->total_out, respectively. + */ +extern LZMA_API(void) lzma_get_progress(lzma_stream *strm, + uint64_t *progress_in, uint64_t *progress_out) lzma_nothrow; + + +/** + * \brief Get the memory usage of decoder filter chain + * + * This function is currently supported only when *strm has been initialized + * with a function that takes a memlimit argument. With other functions, you + * should use e.g. lzma_raw_encoder_memusage() or lzma_raw_decoder_memusage() + * to estimate the memory requirements. + * + * This function is useful e.g. after LZMA_MEMLIMIT_ERROR to find out how big + * the memory usage limit should have been to decode the input. Note that + * this may give misleading information if decoding .xz Streams that have + * multiple Blocks, because each Block can have different memory requirements. + * + * \return How much memory is currently allocated for the filter + * decoders. If no filter chain is currently allocated, + * some non-zero value is still returned, which is less than + * or equal to what any filter chain would indicate as its + * memory requirement. + * + * If this function isn't supported by *strm or some other error + * occurs, zero is returned. + */ +extern LZMA_API(uint64_t) lzma_memusage(const lzma_stream *strm) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the current memory usage limit + * + * This function is supported only when *strm has been initialized with + * a function that takes a memlimit argument. + * + * \return On success, the current memory usage limit is returned + * (always non-zero). On error, zero is returned. + */ +extern LZMA_API(uint64_t) lzma_memlimit_get(const lzma_stream *strm) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Set the memory usage limit + * + * This function is supported only when *strm has been initialized with + * a function that takes a memlimit argument. + * + * liblzma 5.2.3 and earlier has a bug where memlimit value of 0 causes + * this function to do nothing (leaving the limit unchanged) and still + * return LZMA_OK. Later versions treat 0 as if 1 had been specified (so + * lzma_memlimit_get() will return 1 even if you specify 0 here). + * + * liblzma 5.2.6 and earlier had a bug in single-threaded .xz decoder + * (lzma_stream_decoder()) which made it impossible to continue decoding + * after LZMA_MEMLIMIT_ERROR even if the limit was increased using + * lzma_memlimit_set(). Other decoders worked correctly. + * + * \return - LZMA_OK: New memory usage limit successfully set. + * - LZMA_MEMLIMIT_ERROR: The new limit is too small. + * The limit was not changed. + * - LZMA_PROG_ERROR: Invalid arguments, e.g. *strm doesn't + * support memory usage limit. + */ +extern LZMA_API(lzma_ret) lzma_memlimit_set( + lzma_stream *strm, uint64_t memlimit) lzma_nothrow; diff --git a/src/liblzma/api/lzma/bcj.h b/src/liblzma/api/lzma/bcj.h new file mode 100644 index 0000000..a1738d9 --- /dev/null +++ b/src/liblzma/api/lzma/bcj.h @@ -0,0 +1,94 @@ +/** + * \file lzma/bcj.h + * \brief Branch/Call/Jump conversion filters + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/* Filter IDs for lzma_filter.id */ + +#define LZMA_FILTER_X86 LZMA_VLI_C(0x04) + /**< + * Filter for x86 binaries + */ + +#define LZMA_FILTER_POWERPC LZMA_VLI_C(0x05) + /**< + * Filter for Big endian PowerPC binaries + */ + +#define LZMA_FILTER_IA64 LZMA_VLI_C(0x06) + /**< + * Filter for IA-64 (Itanium) binaries. + */ + +#define LZMA_FILTER_ARM LZMA_VLI_C(0x07) + /**< + * Filter for ARM binaries. + */ + +#define LZMA_FILTER_ARMTHUMB LZMA_VLI_C(0x08) + /**< + * Filter for ARM-Thumb binaries. + */ + +#define LZMA_FILTER_SPARC LZMA_VLI_C(0x09) + /**< + * Filter for SPARC binaries. + */ + +#define LZMA_FILTER_ARM64 LZMA_VLI_C(0x0A) + /**< + * Filter for ARM64 binaries. + */ + +/** + * \brief Options for BCJ filters (except ARM64) + * + * The BCJ filters never change the size of the data. Specifying options + * for them is optional: if pointer to options is NULL, default value is + * used. You probably never need to specify options to BCJ filters, so just + * set the options pointer to NULL and be happy. + * + * If options with non-default values have been specified when encoding, + * the same options must also be specified when decoding. + * + * \note At the moment, none of the BCJ filters support + * LZMA_SYNC_FLUSH. If LZMA_SYNC_FLUSH is specified, + * LZMA_OPTIONS_ERROR will be returned. If there is need, + * partial support for LZMA_SYNC_FLUSH can be added in future. + * Partial means that flushing would be possible only at + * offsets that are multiple of 2, 4, or 16 depending on + * the filter, except x86 which cannot be made to support + * LZMA_SYNC_FLUSH predictably. + */ +typedef struct { + /** + * \brief Start offset for conversions + * + * This setting is useful only when the same filter is used + * _separately_ for multiple sections of the same executable file, + * and the sections contain cross-section branch/call/jump + * instructions. In that case it is beneficial to set the start + * offset of the non-first sections so that the relative addresses + * of the cross-section branch/call/jump instructions will use the + * same absolute addresses as in the first section. + * + * When the pointer to options is NULL, the default value (zero) + * is used. + */ + uint32_t start_offset; + +} lzma_options_bcj; diff --git a/src/liblzma/api/lzma/block.h b/src/liblzma/api/lzma/block.h new file mode 100644 index 0000000..082e558 --- /dev/null +++ b/src/liblzma/api/lzma/block.h @@ -0,0 +1,578 @@ +/** + * \file lzma/block.h + * \brief .xz Block handling + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Options for the Block and Block Header encoders and decoders + * + * Different Block handling functions use different parts of this structure. + * Some read some members, other functions write, and some do both. Only the + * members listed for reading need to be initialized when the specified + * functions are called. The members marked for writing will be assigned + * new values at some point either by calling the given function or by + * later calls to lzma_code(). + */ +typedef struct { + /** + * \brief Block format version + * + * To prevent API and ABI breakages when new features are needed, + * a version number is used to indicate which fields in this + * structure are in use: + * - liblzma >= 5.0.0: version = 0 is supported. + * - liblzma >= 5.1.4beta: Support for version = 1 was added, + * which adds the ignore_check field. + * + * If version is greater than one, most Block related functions + * will return LZMA_OPTIONS_ERROR (lzma_block_header_decode() works + * with any version value). + * + * Read by: + * - All functions that take pointer to lzma_block as argument, + * including lzma_block_header_decode(). + * + * Written by: + * - lzma_block_header_decode() + */ + uint32_t version; + + /** + * \brief Size of the Block Header field + * + * This is always a multiple of four. + * + * Read by: + * - lzma_block_header_encode() + * - lzma_block_header_decode() + * - lzma_block_compressed_size() + * - lzma_block_unpadded_size() + * - lzma_block_total_size() + * - lzma_block_decoder() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_size() + * - lzma_block_buffer_encode() + */ + uint32_t header_size; +# define LZMA_BLOCK_HEADER_SIZE_MIN 8 +# define LZMA_BLOCK_HEADER_SIZE_MAX 1024 + + /** + * \brief Type of integrity Check + * + * The Check ID is not stored into the Block Header, thus its value + * must be provided also when decoding. + * + * Read by: + * - lzma_block_header_encode() + * - lzma_block_header_decode() + * - lzma_block_compressed_size() + * - lzma_block_unpadded_size() + * - lzma_block_total_size() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + lzma_check check; + + /** + * \brief Size of the Compressed Data in bytes + * + * Encoding: If this is not LZMA_VLI_UNKNOWN, Block Header encoder + * will store this value to the Block Header. Block encoder doesn't + * care about this value, but will set it once the encoding has been + * finished. + * + * Decoding: If this is not LZMA_VLI_UNKNOWN, Block decoder will + * verify that the size of the Compressed Data field matches + * compressed_size. + * + * Usually you don't know this value when encoding in streamed mode, + * and thus cannot write this field into the Block Header. + * + * In non-streamed mode you can reserve space for this field before + * encoding the actual Block. After encoding the data, finish the + * Block by encoding the Block Header. Steps in detail: + * + * - Set compressed_size to some big enough value. If you don't know + * better, use LZMA_VLI_MAX, but remember that bigger values take + * more space in Block Header. + * + * - Call lzma_block_header_size() to see how much space you need to + * reserve for the Block Header. + * + * - Encode the Block using lzma_block_encoder() and lzma_code(). + * It sets compressed_size to the correct value. + * + * - Use lzma_block_header_encode() to encode the Block Header. + * Because space was reserved in the first step, you don't need + * to call lzma_block_header_size() anymore, because due to + * reserving, header_size has to be big enough. If it is "too big", + * lzma_block_header_encode() will add enough Header Padding to + * make Block Header to match the size specified by header_size. + * + * Read by: + * - lzma_block_header_size() + * - lzma_block_header_encode() + * - lzma_block_compressed_size() + * - lzma_block_unpadded_size() + * - lzma_block_total_size() + * - lzma_block_decoder() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_decode() + * - lzma_block_compressed_size() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + lzma_vli compressed_size; + + /** + * \brief Uncompressed Size in bytes + * + * This is handled very similarly to compressed_size above. + * + * uncompressed_size is needed by fewer functions than + * compressed_size. This is because uncompressed_size isn't + * needed to validate that Block stays within proper limits. + * + * Read by: + * - lzma_block_header_size() + * - lzma_block_header_encode() + * - lzma_block_decoder() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_decode() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + lzma_vli uncompressed_size; + + /** + * \brief Array of filters + * + * There can be 1-4 filters. The end of the array is marked with + * .id = LZMA_VLI_UNKNOWN. + * + * Read by: + * - lzma_block_header_size() + * - lzma_block_header_encode() + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + * + * Written by: + * - lzma_block_header_decode(): Note that this does NOT free() + * the old filter options structures. All unused filters[] will + * have .id == LZMA_VLI_UNKNOWN and .options == NULL. If + * decoding fails, all filters[] are guaranteed to be + * LZMA_VLI_UNKNOWN and NULL. + * + * \note Because of the array is terminated with + * .id = LZMA_VLI_UNKNOWN, the actual array must + * have LZMA_FILTERS_MAX + 1 members or the Block + * Header decoder will overflow the buffer. + */ + lzma_filter *filters; + + /** + * \brief Raw value stored in the Check field + * + * After successful coding, the first lzma_check_size(check) bytes + * of this array contain the raw value stored in the Check field. + * + * Note that CRC32 and CRC64 are stored in little endian byte order. + * Take it into account if you display the Check values to the user. + * + * Written by: + * - lzma_block_encoder() + * - lzma_block_decoder() + * - lzma_block_buffer_encode() + * - lzma_block_buffer_decode() + */ + uint8_t raw_check[LZMA_CHECK_SIZE_MAX]; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the names + * of these variables may change. These are and will never be used + * with the currently supported options, so it is safe to leave these + * uninitialized. + */ + void *reserved_ptr1; + void *reserved_ptr2; + void *reserved_ptr3; + uint32_t reserved_int1; + uint32_t reserved_int2; + lzma_vli reserved_int3; + lzma_vli reserved_int4; + lzma_vli reserved_int5; + lzma_vli reserved_int6; + lzma_vli reserved_int7; + lzma_vli reserved_int8; + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + lzma_reserved_enum reserved_enum3; + lzma_reserved_enum reserved_enum4; + + /** + * \brief A flag to Block decoder to not verify the Check field + * + * This field is supported by liblzma >= 5.1.4beta if .version >= 1. + * + * If this is set to true, the integrity check won't be calculated + * and verified. Unless you know what you are doing, you should + * leave this to false. (A reason to set this to true is when the + * file integrity is verified externally anyway and you want to + * speed up the decompression, which matters mostly when using + * SHA-256 as the integrity check.) + * + * If .version >= 1, read by: + * - lzma_block_decoder() + * - lzma_block_buffer_decode() + * + * Written by (.version is ignored): + * - lzma_block_header_decode() always sets this to false + */ + lzma_bool ignore_check; + + lzma_bool reserved_bool2; + lzma_bool reserved_bool3; + lzma_bool reserved_bool4; + lzma_bool reserved_bool5; + lzma_bool reserved_bool6; + lzma_bool reserved_bool7; + lzma_bool reserved_bool8; + +} lzma_block; + + +/** + * \brief Decode the Block Header Size field + * + * To decode Block Header using lzma_block_header_decode(), the size of the + * Block Header has to be known and stored into lzma_block.header_size. + * The size can be calculated from the first byte of a Block using this macro. + * Note that if the first byte is 0x00, it indicates beginning of Index; use + * this macro only when the byte is not 0x00. + * + * There is no encoding macro, because Block Header encoder is enough for that. + */ +#define lzma_block_header_size_decode(b) (((uint32_t)(b) + 1) * 4) + + +/** + * \brief Calculate Block Header Size + * + * Calculate the minimum size needed for the Block Header field using the + * settings specified in the lzma_block structure. Note that it is OK to + * increase the calculated header_size value as long as it is a multiple of + * four and doesn't exceed LZMA_BLOCK_HEADER_SIZE_MAX. Increasing header_size + * just means that lzma_block_header_encode() will add Header Padding. + * + * \return - LZMA_OK: Size calculated successfully and stored to + * block->header_size. + * - LZMA_OPTIONS_ERROR: Unsupported version, filters or + * filter options. + * - LZMA_PROG_ERROR: Invalid values like compressed_size == 0. + * + * \note This doesn't check that all the options are valid i.e. this + * may return LZMA_OK even if lzma_block_header_encode() or + * lzma_block_encoder() would fail. If you want to validate the + * filter chain, consider using lzma_memlimit_encoder() which as + * a side-effect validates the filter chain. + */ +extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Encode Block Header + * + * The caller must have calculated the size of the Block Header already with + * lzma_block_header_size(). If a value larger than the one calculated by + * lzma_block_header_size() is used, the Block Header will be padded to the + * specified size. + * + * \param out Beginning of the output buffer. This must be + * at least block->header_size bytes. + * \param block Block options to be encoded. + * + * \return - LZMA_OK: Encoding was successful. block->header_size + * bytes were written to output buffer. + * - LZMA_OPTIONS_ERROR: Invalid or unsupported options. + * - LZMA_PROG_ERROR: Invalid arguments, for example + * block->header_size is invalid or block->filters is NULL. + */ +extern LZMA_API(lzma_ret) lzma_block_header_encode( + const lzma_block *block, uint8_t *out) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Block Header + * + * block->version should (usually) be set to the highest value supported + * by the application. If the application sets block->version to a value + * higher than supported by the current liblzma version, this function will + * downgrade block->version to the highest value supported by it. Thus one + * should check the value of block->version after calling this function if + * block->version was set to a non-zero value and the application doesn't + * otherwise know that the liblzma version being used is new enough to + * support the specified block->version. + * + * The size of the Block Header must have already been decoded with + * lzma_block_header_size_decode() macro and stored to block->header_size. + * + * The integrity check type from Stream Header must have been stored + * to block->check. + * + * block->filters must have been allocated, but they don't need to be + * initialized (possible existing filter options are not freed). + * + * \param block Destination for Block options. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() (and also free() + * if an error occurs). + * \param in Beginning of the input buffer. This must be + * at least block->header_size bytes. + * + * \return - LZMA_OK: Decoding was successful. block->header_size + * bytes were read from the input buffer. + * - LZMA_OPTIONS_ERROR: The Block Header specifies some + * unsupported options such as unsupported filters. This can + * happen also if block->version was set to a too low value + * compared to what would be required to properly represent + * the information stored in the Block Header. + * - LZMA_DATA_ERROR: Block Header is corrupt, for example, + * the CRC32 doesn't match. + * - LZMA_PROG_ERROR: Invalid arguments, for example + * block->header_size is invalid or block->filters is NULL. + */ +extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block, + const lzma_allocator *allocator, const uint8_t *in) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Validate and set Compressed Size according to Unpadded Size + * + * Block Header stores Compressed Size, but Index has Unpadded Size. If the + * application has already parsed the Index and is now decoding Blocks, + * it can calculate Compressed Size from Unpadded Size. This function does + * exactly that with error checking: + * + * - Compressed Size calculated from Unpadded Size must be positive integer, + * that is, Unpadded Size must be big enough that after Block Header and + * Check fields there's still at least one byte for Compressed Size. + * + * - If Compressed Size was present in Block Header, the new value + * calculated from Unpadded Size is compared against the value + * from Block Header. + * + * \note This function must be called _after_ decoding the Block Header + * field so that it can properly validate Compressed Size if it + * was present in Block Header. + * + * \return - LZMA_OK: block->compressed_size was set successfully. + * - LZMA_DATA_ERROR: unpadded_size is too small compared to + * block->header_size and lzma_check_size(block->check). + * - LZMA_PROG_ERROR: Some values are invalid. For example, + * block->header_size must be a multiple of four and + * between 8 and 1024 inclusive. + */ +extern LZMA_API(lzma_ret) lzma_block_compressed_size( + lzma_block *block, lzma_vli unpadded_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Calculate Unpadded Size + * + * The Index field stores Unpadded Size and Uncompressed Size. The latter + * can be taken directly from the lzma_block structure after coding a Block, + * but Unpadded Size needs to be calculated from Block Header Size, + * Compressed Size, and size of the Check field. This is where this function + * is needed. + * + * \return Unpadded Size on success, or zero on error. + */ +extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate the total encoded size of a Block + * + * This is equivalent to lzma_block_unpadded_size() except that the returned + * value includes the size of the Block Padding field. + * + * \return On success, total encoded size of the Block. On error, + * zero is returned. + */ +extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize .xz Block encoder + * + * Valid actions for lzma_code() are LZMA_RUN, LZMA_SYNC_FLUSH (only if the + * filter chain supports it), and LZMA_FINISH. + * + * \return - LZMA_OK: All good, continue with lzma_code(). + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_UNSUPPORTED_CHECK: block->check specifies a Check ID + * that is not supported by this build of liblzma. Initializing + * the encoder failed. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_encoder( + lzma_stream *strm, lzma_block *block) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .xz Block decoder + * + * Valid actions for lzma_code() are LZMA_RUN and LZMA_FINISH. Using + * LZMA_FINISH is not required. It is supported only for convenience. + * + * \return - LZMA_OK: All good, continue with lzma_code(). + * - LZMA_PROG_ERROR + * - LZMA_MEM_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_decoder( + lzma_stream *strm, lzma_block *block) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Calculate maximum output size for single-call Block encoding + * + * This is equivalent to lzma_stream_buffer_bound() but for .xz Blocks. + * See the documentation of lzma_stream_buffer_bound(). + */ +extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size) + lzma_nothrow; + + +/** + * \brief Single-call .xz Block encoder + * + * In contrast to the multi-call encoder initialized with + * lzma_block_encoder(), this function encodes also the Block Header. This + * is required to make it possible to write appropriate Block Header also + * in case the data isn't compressible, and different filter chain has to be + * used to encode the data in uncompressed form using uncompressed chunks + * of the LZMA2 filter. + * + * When the data isn't compressible, header_size, compressed_size, and + * uncompressed_size are set just like when the data was compressible, but + * it is possible that header_size is too small to hold the filter chain + * specified in block->filters, because that isn't necessarily the filter + * chain that was actually used to encode the data. lzma_block_unpadded_size() + * still works normally, because it doesn't read the filters array. + * + * \param block Block options: block->version, block->check, + * and block->filters must have been initialized. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_UNSUPPORTED_CHECK + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_buffer_encode( + lzma_block *block, const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call uncompressed .xz Block encoder + * + * This is like lzma_block_buffer_encode() except this doesn't try to + * compress the data and instead encodes the data using LZMA2 uncompressed + * chunks. The required output buffer size can be determined with + * lzma_block_buffer_bound(). + * + * Since the data won't be compressed, this function ignores block->filters. + * This function doesn't take lzma_allocator because this function doesn't + * allocate any memory from the heap. + */ +extern LZMA_API(lzma_ret) lzma_block_uncomp_encode(lzma_block *block, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Block decoder + * + * This is single-call equivalent of lzma_block_decoder(), and requires that + * the caller has already decoded Block Header and checked its memory usage. + * + * \param block Block options just like with lzma_block_decoder(). + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_OPTIONS_ERROR + * - LZMA_DATA_ERROR + * - LZMA_MEM_ERROR + * - LZMA_BUF_ERROR: Output buffer was too small. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_block_buffer_decode( + lzma_block *block, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow; diff --git a/src/liblzma/api/lzma/check.h b/src/liblzma/api/lzma/check.h new file mode 100644 index 0000000..6a243db --- /dev/null +++ b/src/liblzma/api/lzma/check.h @@ -0,0 +1,150 @@ +/** + * \file lzma/check.h + * \brief Integrity checks + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Type of the integrity check (Check ID) + * + * The .xz format supports multiple types of checks that are calculated + * from the uncompressed data. They vary in both speed and ability to + * detect errors. + */ +typedef enum { + LZMA_CHECK_NONE = 0, + /**< + * No Check is calculated. + * + * Size of the Check field: 0 bytes + */ + + LZMA_CHECK_CRC32 = 1, + /**< + * CRC32 using the polynomial from the IEEE 802.3 standard + * + * Size of the Check field: 4 bytes + */ + + LZMA_CHECK_CRC64 = 4, + /**< + * CRC64 using the polynomial from the ECMA-182 standard + * + * Size of the Check field: 8 bytes + */ + + LZMA_CHECK_SHA256 = 10 + /**< + * SHA-256 + * + * Size of the Check field: 32 bytes + */ +} lzma_check; + + +/** + * \brief Maximum valid Check ID + * + * The .xz file format specification specifies 16 Check IDs (0-15). Some + * of them are only reserved, that is, no actual Check algorithm has been + * assigned. When decoding, liblzma still accepts unknown Check IDs for + * future compatibility. If a valid but unsupported Check ID is detected, + * liblzma can indicate a warning; see the flags LZMA_TELL_NO_CHECK, + * LZMA_TELL_UNSUPPORTED_CHECK, and LZMA_TELL_ANY_CHECK in container.h. + */ +#define LZMA_CHECK_ID_MAX 15 + + +/** + * \brief Test if the given Check ID is supported + * + * Return true if the given Check ID is supported by this liblzma build. + * Otherwise false is returned. It is safe to call this with a value that + * is not in the range [0, 15]; in that case the return value is always false. + * + * You can assume that LZMA_CHECK_NONE and LZMA_CHECK_CRC32 are always + * supported (even if liblzma is built with limited features). + */ +extern LZMA_API(lzma_bool) lzma_check_is_supported(lzma_check check) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Get the size of the Check field with the given Check ID + * + * Although not all Check IDs have a check algorithm associated, the size of + * every Check is already frozen. This function returns the size (in bytes) of + * the Check field with the specified Check ID. The values are: + * { 0, 4, 4, 4, 8, 8, 8, 16, 16, 16, 32, 32, 32, 64, 64, 64 } + * + * If the argument is not in the range [0, 15], UINT32_MAX is returned. + */ +extern LZMA_API(uint32_t) lzma_check_size(lzma_check check) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Maximum size of a Check field + */ +#define LZMA_CHECK_SIZE_MAX 64 + + +/** + * \brief Calculate CRC32 + * + * Calculate CRC32 using the polynomial from the IEEE 802.3 standard. + * + * \param buf Pointer to the input buffer + * \param size Size of the input buffer + * \param crc Previously returned CRC value. This is used to + * calculate the CRC of a big buffer in smaller chunks. + * Set to zero when starting a new calculation. + * + * \return Updated CRC value, which can be passed to this function + * again to continue CRC calculation. + */ +extern LZMA_API(uint32_t) lzma_crc32( + const uint8_t *buf, size_t size, uint32_t crc) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate CRC64 + * + * Calculate CRC64 using the polynomial from the ECMA-182 standard. + * + * This function is used similarly to lzma_crc32(). See its documentation. + */ +extern LZMA_API(uint64_t) lzma_crc64( + const uint8_t *buf, size_t size, uint64_t crc) + lzma_nothrow lzma_attr_pure; + + +/* + * SHA-256 functions are currently not exported to public API. + * Contact Lasse Collin if you think it should be. + */ + + +/** + * \brief Get the type of the integrity check + * + * This function can be called only immediately after lzma_code() has + * returned LZMA_NO_CHECK, LZMA_UNSUPPORTED_CHECK, or LZMA_GET_CHECK. + * Calling this function in any other situation has undefined behavior. + */ +extern LZMA_API(lzma_check) lzma_get_check(const lzma_stream *strm) + lzma_nothrow; diff --git a/src/liblzma/api/lzma/container.h b/src/liblzma/api/lzma/container.h new file mode 100644 index 0000000..6e432a1 --- /dev/null +++ b/src/liblzma/api/lzma/container.h @@ -0,0 +1,904 @@ +/** + * \file lzma/container.h + * \brief File formats + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/************ + * Encoding * + ************/ + +/** + * \brief Default compression preset + * + * It's not straightforward to recommend a default preset, because in some + * cases keeping the resource usage relatively low is more important that + * getting the maximum compression ratio. + */ +#define LZMA_PRESET_DEFAULT UINT32_C(6) + + +/** + * \brief Mask for preset level + * + * This is useful only if you need to extract the level from the preset + * variable. That should be rare. + */ +#define LZMA_PRESET_LEVEL_MASK UINT32_C(0x1F) + + +/* + * Preset flags + * + * Currently only one flag is defined. + */ + +/** + * \brief Extreme compression preset + * + * This flag modifies the preset to make the encoding significantly slower + * while improving the compression ratio only marginally. This is useful + * when you don't mind wasting time to get as small result as possible. + * + * This flag doesn't affect the memory usage requirements of the decoder (at + * least not significantly). The memory usage of the encoder may be increased + * a little but only at the lowest preset levels (0-3). + */ +#define LZMA_PRESET_EXTREME (UINT32_C(1) << 31) + + +/** + * \brief Multithreading options + */ +typedef struct { + /** + * \brief Flags + * + * Set this to zero if no flags are wanted. + * + * Encoder: No flags are currently supported. + * + * Decoder: Bitwise-or of zero or more of the decoder flags: + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * LZMA_TELL_ANY_CHECK, LZMA_IGNORE_CHECK, + * LZMA_CONCATENATED, LZMA_FAIL_FAST + */ + uint32_t flags; + + /** + * \brief Number of worker threads to use + */ + uint32_t threads; + + /** + * \brief Encoder only: Maximum uncompressed size of a Block + * + * The encoder will start a new .xz Block every block_size bytes. + * Using LZMA_FULL_FLUSH or LZMA_FULL_BARRIER with lzma_code() + * the caller may tell liblzma to start a new Block earlier. + * + * With LZMA2, a recommended block size is 2-4 times the LZMA2 + * dictionary size. With very small dictionaries, it is recommended + * to use at least 1 MiB block size for good compression ratio, even + * if this is more than four times the dictionary size. Note that + * these are only recommendations for typical use cases; feel free + * to use other values. Just keep in mind that using a block size + * less than the LZMA2 dictionary size is waste of RAM. + * + * Set this to 0 to let liblzma choose the block size depending + * on the compression options. For LZMA2 it will be 3*dict_size + * or 1 MiB, whichever is more. + * + * For each thread, about 3 * block_size bytes of memory will be + * allocated. This may change in later liblzma versions. If so, + * the memory usage will probably be reduced, not increased. + */ + uint64_t block_size; + + /** + * \brief Timeout to allow lzma_code() to return early + * + * Multithreading can make liblzma to consume input and produce + * output in a very bursty way: it may first read a lot of input + * to fill internal buffers, then no input or output occurs for + * a while. + * + * In single-threaded mode, lzma_code() won't return until it has + * either consumed all the input or filled the output buffer. If + * this is done in multithreaded mode, it may cause a call + * lzma_code() to take even tens of seconds, which isn't acceptable + * in all applications. + * + * To avoid very long blocking times in lzma_code(), a timeout + * (in milliseconds) may be set here. If lzma_code() would block + * longer than this number of milliseconds, it will return with + * LZMA_OK. Reasonable values are 100 ms or more. The xz command + * line tool uses 300 ms. + * + * If long blocking times are fine for you, set timeout to a special + * value of 0, which will disable the timeout mechanism and will make + * lzma_code() block until all the input is consumed or the output + * buffer has been filled. + * + * \note Even with a timeout, lzma_code() might sometimes take + * somewhat long time to return. No timing guarantees + * are made. + */ + uint32_t timeout; + + /** + * \brief Encoder only: Compression preset + * + * The preset is set just like with lzma_easy_encoder(). + * The preset is ignored if filters below is non-NULL. + */ + uint32_t preset; + + /** + * \brief Encoder only: Filter chain (alternative to a preset) + * + * If this is NULL, the preset above is used. Otherwise the preset + * is ignored and the filter chain specified here is used. + */ + const lzma_filter *filters; + + /** + * \brief Encoder only: Integrity check type + * + * See check.h for available checks. The xz command line tool + * defaults to LZMA_CHECK_CRC64, which is a good choice if you + * are unsure. + */ + lzma_check check; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the names + * of these variables may change. These are and will never be used + * with the currently supported options, so it is safe to leave these + * uninitialized. + */ + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + lzma_reserved_enum reserved_enum3; + uint32_t reserved_int1; + uint32_t reserved_int2; + uint32_t reserved_int3; + uint32_t reserved_int4; + + /** + * \brief Memory usage limit to reduce the number of threads + * + * Encoder: Ignored. + * + * Decoder: + * + * If the number of threads has been set so high that more than + * memlimit_threading bytes of memory would be needed, the number + * of threads will be reduced so that the memory usage will not exceed + * memlimit_threading bytes. However, if memlimit_threading cannot + * be met even in single-threaded mode, then decoding will continue + * in single-threaded mode and memlimit_threading may be exceeded + * even by a large amount. That is, memlimit_threading will never make + * lzma_code() return LZMA_MEMLIMIT_ERROR. To truly cap the memory + * usage, see memlimit_stop below. + * + * Setting memlimit_threading to UINT64_MAX or a similar huge value + * means that liblzma is allowed to keep the whole compressed file + * and the whole uncompressed file in memory in addition to the memory + * needed by the decompressor data structures used by each thread! + * In other words, a reasonable value limit must be set here or it + * will cause problems sooner or later. If you have no idea what + * a reasonable value could be, try lzma_physmem() / 4 as a starting + * point. Setting this limit will never prevent decompression of + * a file; this will only reduce the number of threads. + * + * If memlimit_threading is greater than memlimit_stop, then the value + * of memlimit_stop will be used for both. + */ + uint64_t memlimit_threading; + + /** + * \brief Memory usage limit that should never be exceeded + * + * Encoder: Ignored. + * + * Decoder: If decompressing will need more than this amount of + * memory even in the single-threaded mode, then lzma_code() will + * return LZMA_MEMLIMIT_ERROR. + */ + uint64_t memlimit_stop; + + uint64_t reserved_int7; + uint64_t reserved_int8; + void *reserved_ptr1; + void *reserved_ptr2; + void *reserved_ptr3; + void *reserved_ptr4; + +} lzma_mt; + + +/** + * \brief Calculate approximate memory usage of easy encoder + * + * This function is a wrapper for lzma_raw_encoder_memusage(). + * + * \param preset Compression preset (level and possible flags) + * + * \return Number of bytes of memory required for the given + * preset when encoding. If an error occurs, for example + * due to unsupported preset, UINT64_MAX is returned. + */ +extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate approximate decoder memory usage of a preset + * + * This function is a wrapper for lzma_raw_decoder_memusage(). + * + * \param preset Compression preset (level and possible flags) + * + * \return Number of bytes of memory required to decompress a file + * that was compressed using the given preset. If an error + * occurs, for example due to unsupported preset, UINT64_MAX + * is returned. + */ +extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize .xz Stream encoder using a preset number + * + * This function is intended for those who just want to use the basic features + * if liblzma (that is, most developers out there). + * + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * \param preset Compression preset to use. A preset consist of level + * number and zero or more flags. Usually flags aren't + * used, so preset is simply a number [0, 9] which match + * the options -0 ... -9 of the xz command line tool. + * Additional flags can be be set using bitwise-or with + * the preset level number, e.g. 6 | LZMA_PRESET_EXTREME. + * \param check Integrity check type to use. See check.h for available + * checks. The xz command line tool defaults to + * LZMA_CHECK_CRC64, which is a good choice if you are + * unsure. LZMA_CHECK_CRC32 is good too as long as the + * uncompressed file is not many gigabytes. + * + * \return - LZMA_OK: Initialization succeeded. Use lzma_code() to + * encode your data. + * - LZMA_MEM_ERROR: Memory allocation failed. + * - LZMA_OPTIONS_ERROR: The given compression preset is not + * supported by this build of liblzma. + * - LZMA_UNSUPPORTED_CHECK: The given check type is not + * supported by this liblzma build. + * - LZMA_PROG_ERROR: One or more of the parameters have values + * that will never be valid. For example, strm == NULL. + * + * If initialization fails (return value is not LZMA_OK), all the memory + * allocated for *strm by liblzma is always freed. Thus, there is no need + * to call lzma_end() after failed initialization. + * + * If initialization succeeds, use lzma_code() to do the actual encoding. + * Valid values for `action' (the second argument of lzma_code()) are + * LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future, + * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH. + */ +extern LZMA_API(lzma_ret) lzma_easy_encoder( + lzma_stream *strm, uint32_t preset, lzma_check check) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Stream encoding using a preset number + * + * The maximum required output buffer size can be calculated with + * lzma_stream_buffer_bound(). + * + * \param preset Compression preset to use. See the description + * in lzma_easy_encoder(). + * \param check Type of the integrity check to calculate from + * uncompressed data. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_UNSUPPORTED_CHECK + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_easy_buffer_encode( + uint32_t preset, lzma_check check, + const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Initialize .xz Stream encoder using a custom filter chain + * + * \param strm Pointer to properly prepared lzma_stream + * \param filters Array of filters. This must be terminated with + * filters[n].id = LZMA_VLI_UNKNOWN. See filter.h for + * more information. + * \param check Type of the integrity check to calculate from + * uncompressed data. + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR + * - LZMA_UNSUPPORTED_CHECK + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm, + const lzma_filter *filters, lzma_check check) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Calculate approximate memory usage of multithreaded .xz encoder + * + * Since doing the encoding in threaded mode doesn't affect the memory + * requirements of single-threaded decompressor, you can use + * lzma_easy_decoder_memusage(options->preset) or + * lzma_raw_decoder_memusage(options->filters) to calculate + * the decompressor memory requirements. + * + * \param options Compression options + * + * \return Number of bytes of memory required for encoding with the + * given options. If an error occurs, for example due to + * unsupported preset or filter chain, UINT64_MAX is returned. + */ +extern LZMA_API(uint64_t) lzma_stream_encoder_mt_memusage( + const lzma_mt *options) lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize multithreaded .xz Stream encoder + * + * This provides the functionality of lzma_easy_encoder() and + * lzma_stream_encoder() as a single function for multithreaded use. + * + * The supported actions for lzma_code() are LZMA_RUN, LZMA_FULL_FLUSH, + * LZMA_FULL_BARRIER, and LZMA_FINISH. Support for LZMA_SYNC_FLUSH might be + * added in the future. + * + * \param strm Pointer to properly prepared lzma_stream + * \param options Pointer to multithreaded compression options + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_UNSUPPORTED_CHECK + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_encoder_mt( + lzma_stream *strm, const lzma_mt *options) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .lzma encoder (legacy file format) + * + * The .lzma format is sometimes called the LZMA_Alone format, which is the + * reason for the name of this function. The .lzma format supports only the + * LZMA1 filter. There is no support for integrity checks like CRC32. + * + * Use this function if and only if you need to create files readable by + * legacy LZMA tools such as LZMA Utils 4.32.x. Moving to the .xz format + * is strongly recommended. + * + * The valid action values for lzma_code() are LZMA_RUN and LZMA_FINISH. + * No kind of flushing is supported, because the file format doesn't make + * it possible. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_alone_encoder( + lzma_stream *strm, const lzma_options_lzma *options) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Calculate output buffer size for single-call Stream encoder + * + * When trying to compress uncompressible data, the encoded size will be + * slightly bigger than the input data. This function calculates how much + * output buffer space is required to be sure that lzma_stream_buffer_encode() + * doesn't return LZMA_BUF_ERROR. + * + * The calculated value is not exact, but it is guaranteed to be big enough. + * The actual maximum output space required may be slightly smaller (up to + * about 100 bytes). This should not be a problem in practice. + * + * If the calculated maximum size doesn't fit into size_t or would make the + * Stream grow past LZMA_VLI_MAX (which should never happen in practice), + * zero is returned to indicate the error. + * + * \note The limit calculated by this function applies only to + * single-call encoding. Multi-call encoding may (and probably + * will) have larger maximum expansion when encoding + * uncompressible data. Currently there is no function to + * calculate the maximum expansion of multi-call encoding. + */ +extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size) + lzma_nothrow; + + +/** + * \brief Single-call .xz Stream encoder + * + * \param filters Array of filters. This must be terminated with + * filters[n].id = LZMA_VLI_UNKNOWN. See filter.h + * for more information. + * \param check Type of the integrity check to calculate from + * uncompressed data. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_UNSUPPORTED_CHECK + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_buffer_encode( + lzma_filter *filters, lzma_check check, + const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief MicroLZMA encoder + * + * The MicroLZMA format is a raw LZMA stream whose first byte (always 0x00) + * has been replaced with bitwise-negation of the LZMA properties (lc/lp/pb). + * This encoding ensures that the first byte of MicroLZMA stream is never + * 0x00. There is no end of payload marker and thus the uncompressed size + * must be stored separately. For the best error detection the dictionary + * size should be stored separately as well but alternatively one may use + * the uncompressed size as the dictionary size when decoding. + * + * With the MicroLZMA encoder, lzma_code() behaves slightly unusually. + * The action argument must be LZMA_FINISH and the return value will never be + * LZMA_OK. Thus the encoding is always done with a single lzma_code() after + * the initialization. The benefit of the combination of initialization + * function and lzma_code() is that memory allocations can be re-used for + * better performance. + * + * lzma_code() will try to encode as much input as is possible to fit into + * the given output buffer. If not all input can be encoded, the stream will + * be finished without encoding all the input. The caller must check both + * input and output buffer usage after lzma_code() (total_in and total_out + * in lzma_stream can be convenient). Often lzma_code() can fill the output + * buffer completely if there is a lot of input, but sometimes a few bytes + * may remain unused because the next LZMA symbol would require more space. + * + * lzma_stream.avail_out must be at least 6. Otherwise LZMA_PROG_ERROR + * will be returned. + * + * The LZMA dictionary should be reasonably low to speed up the encoder + * re-initialization. A good value is bigger than the resulting + * uncompressed size of most of the output chunks. For example, if output + * size is 4 KiB, dictionary size of 32 KiB or 64 KiB is good. If the + * data compresses extremely well, even 128 KiB may be useful. + * + * The MicroLZMA format and this encoder variant were made with the EROFS + * file system in mind. This format may be convenient in other embedded + * uses too where many small streams are needed. XZ Embedded includes a + * decoder for this format. + * + * \return - LZMA_STREAM_END: All good. Check the amounts of input used + * and output produced. Store the amount of input used + * (uncompressed size) as it needs to be known to decompress + * the data. + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR: In addition to the generic reasons for this + * error code, this may also be returned if there isn't enough + * output space (6 bytes) to create a valid MicroLZMA stream. + */ +extern LZMA_API(lzma_ret) lzma_microlzma_encoder( + lzma_stream *strm, const lzma_options_lzma *options); + + +/************ + * Decoding * + ************/ + +/** + * This flag makes lzma_code() return LZMA_NO_CHECK if the input stream + * being decoded has no integrity check. Note that when used with + * lzma_auto_decoder(), all .lzma files will trigger LZMA_NO_CHECK + * if LZMA_TELL_NO_CHECK is used. + */ +#define LZMA_TELL_NO_CHECK UINT32_C(0x01) + + +/** + * This flag makes lzma_code() return LZMA_UNSUPPORTED_CHECK if the input + * stream has an integrity check, but the type of the integrity check is not + * supported by this liblzma version or build. Such files can still be + * decoded, but the integrity check cannot be verified. + */ +#define LZMA_TELL_UNSUPPORTED_CHECK UINT32_C(0x02) + + +/** + * This flag makes lzma_code() return LZMA_GET_CHECK as soon as the type + * of the integrity check is known. The type can then be got with + * lzma_get_check(). + */ +#define LZMA_TELL_ANY_CHECK UINT32_C(0x04) + + +/** + * This flag makes lzma_code() not calculate and verify the integrity check + * of the compressed data in .xz files. This means that invalid integrity + * check values won't be detected and LZMA_DATA_ERROR won't be returned in + * such cases. + * + * This flag only affects the checks of the compressed data itself; the CRC32 + * values in the .xz headers will still be verified normally. + * + * Don't use this flag unless you know what you are doing. Possible reasons + * to use this flag: + * + * - Trying to recover data from a corrupt .xz file. + * + * - Speeding up decompression, which matters mostly with SHA-256 + * or with files that have compressed extremely well. It's recommended + * to not use this flag for this purpose unless the file integrity is + * verified externally in some other way. + * + * Support for this flag was added in liblzma 5.1.4beta. + */ +#define LZMA_IGNORE_CHECK UINT32_C(0x10) + + +/** + * This flag enables decoding of concatenated files with file formats that + * allow concatenating compressed files as is. From the formats currently + * supported by liblzma, only the .xz and .lz formats allow concatenated + * files. Concatenated files are not allowed with the legacy .lzma format. + * + * This flag also affects the usage of the `action' argument for lzma_code(). + * When LZMA_CONCATENATED is used, lzma_code() won't return LZMA_STREAM_END + * unless LZMA_FINISH is used as `action'. Thus, the application has to set + * LZMA_FINISH in the same way as it does when encoding. + * + * If LZMA_CONCATENATED is not used, the decoders still accept LZMA_FINISH + * as `action' for lzma_code(), but the usage of LZMA_FINISH isn't required. + */ +#define LZMA_CONCATENATED UINT32_C(0x08) + + +/** + * This flag makes the threaded decoder report errors (like LZMA_DATA_ERROR) + * as soon as they are detected. This saves time when the application has no + * interest in a partially decompressed truncated or corrupt file. Note that + * due to timing randomness, if the same truncated or corrupt input is + * decompressed multiple times with this flag, a different amount of output + * may be produced by different runs, and even the error code might vary. + * + * When using LZMA_FAIL_FAST, it is recommended to use LZMA_FINISH to tell + * the decoder when no more input will be coming because it can help fast + * detection and reporting of truncated files. Note that in this situation + * truncated files might be diagnosed with LZMA_DATA_ERROR instead of + * LZMA_OK or LZMA_BUF_ERROR! + * + * Without this flag the threaded decoder will provide as much output as + * possible at first and then report the pending error. This default behavior + * matches the single-threaded decoder and provides repeatable behavior + * with truncated or corrupt input. There are a few special cases where the + * behavior can still differ like memory allocation failures (LZMA_MEM_ERROR). + * + * Single-threaded decoders currently ignore this flag. + * + * Support for this flag was added in liblzma 5.3.3alpha. Note that in older + * versions this flag isn't supported (LZMA_OPTIONS_ERROR) even by functions + * that ignore this flag in newer liblzma versions. + */ +#define LZMA_FAIL_FAST UINT32_C(0x20) + + +/** + * \brief Initialize .xz Stream decoder + * + * \param strm Pointer to properly prepared lzma_stream + * \param memlimit Memory usage limit as bytes. Use UINT64_MAX + * to effectively disable the limiter. liblzma + * 5.2.3 and earlier don't allow 0 here and return + * LZMA_PROG_ERROR; later versions treat 0 as if 1 + * had been specified. + * \param flags Bitwise-or of zero or more of the decoder flags: + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * LZMA_TELL_ANY_CHECK, LZMA_IGNORE_CHECK, + * LZMA_CONCATENATED, LZMA_FAIL_FAST + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR: Cannot allocate memory. + * - LZMA_OPTIONS_ERROR: Unsupported flags + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_decoder( + lzma_stream *strm, uint64_t memlimit, uint32_t flags) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize multithreaded .xz Stream decoder + * + * \param strm Pointer to properly prepared lzma_stream + * \param options Pointer to multithreaded compression options + * + * The decoder can decode multiple Blocks in parallel. This requires that each + * Block Header contains the Compressed Size and Uncompressed size fields + * which are added by the multi-threaded encoder, see lzma_stream_encoder_mt(). + * + * A Stream with one Block will only utilize one thread. A Stream with multiple + * Blocks but without size information in Block Headers will be processed in + * single-threaded mode in the same way as done by lzma_stream_decoder(). + * Concatenated Streams are processed one Stream at a time; no inter-Stream + * parallelization is done. + * + * This function behaves like lzma_stream_decoder() when options->threads == 1 + * and options->memlimit_threading <= 1. + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR: Cannot allocate memory. + * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. + * - LZMA_OPTIONS_ERROR: Unsupported flags. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_decoder_mt( + lzma_stream *strm, const lzma_mt *options) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode .xz, .lzma, and .lz (lzip) files with autodetection + * + * This decoder autodetects between the .xz, .lzma, and .lz file formats, + * and calls lzma_stream_decoder(), lzma_alone_decoder(), or + * lzma_lzip_decoder() once the type of the input file has been detected. + * + * Support for .lz was added in 5.4.0. + * + * If the flag LZMA_CONCATENATED is used and the input is a .lzma file: + * For historical reasons concatenated .lzma files aren't supported. + * If there is trailing data after one .lzma stream, lzma_code() will + * return LZMA_DATA_ERROR. (lzma_alone_decoder() doesn't have such a check + * as it doesn't support any decoder flags. It will return LZMA_STREAM_END + * after one .lzma stream.) + * + * \param strm Pointer to properly prepared lzma_stream + * \param memlimit Memory usage limit as bytes. Use UINT64_MAX + * to effectively disable the limiter. liblzma + * 5.2.3 and earlier don't allow 0 here and return + * LZMA_PROG_ERROR; later versions treat 0 as if 1 + * had been specified. + * \param flags Bitwise-or of zero or more of the decoder flags: + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * LZMA_TELL_ANY_CHECK, LZMA_IGNORE_CHECK, + * LZMA_CONCATENATED, LZMA_FAIL_FAST + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR: Cannot allocate memory. + * - LZMA_OPTIONS_ERROR: Unsupported flags + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_auto_decoder( + lzma_stream *strm, uint64_t memlimit, uint32_t flags) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .lzma decoder (legacy file format) + * + * \param strm Pointer to properly prepared lzma_stream + * \param memlimit Memory usage limit as bytes. Use UINT64_MAX + * to effectively disable the limiter. liblzma + * 5.2.3 and earlier don't allow 0 here and return + * LZMA_PROG_ERROR; later versions treat 0 as if 1 + * had been specified. + * + * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH. + * There is no need to use LZMA_FINISH, but it's allowed because it may + * simplify certain types of applications. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_alone_decoder( + lzma_stream *strm, uint64_t memlimit) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .lz (lzip) decoder (a foreign file format) + * + * \param strm Pointer to properly prepared lzma_stream + * \param memlimit Memory usage limit as bytes. Use UINT64_MAX + * to effectively disable the limiter. + * \param flags Bitwise-or of flags, or zero for no flags. + * All decoder flags listed above are supported + * although only LZMA_CONCATENATED and (in very rare + * cases) LZMA_IGNORE_CHECK are actually useful. + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * and LZMA_FAIL_FAST do nothing. LZMA_TELL_ANY_CHECK + * is supported for consistency only as CRC32 is + * always used in the .lz format. + * + * This decoder supports the .lz format version 0 and the unextended .lz + * format version 1: + * + * - Files in the format version 0 were produced by lzip 1.3 and older. + * Such files aren't common but may be found from file archives + * as a few source packages were released in this format. People + * might have old personal files in this format too. Decompression + * support for the format version 0 was removed in lzip 1.18. + * + * - lzip 1.3 added decompression support for .lz format version 1 files. + * Compression support was added in lzip 1.4. In lzip 1.6 the .lz format + * version 1 was extended to support the Sync Flush marker. This extension + * is not supported by liblzma. lzma_code() will return LZMA_DATA_ERROR + * at the location of the Sync Flush marker. In practice files with + * the Sync Flush marker are very rare and thus liblzma can decompress + * almost all .lz files. + * + * Just like with lzma_stream_decoder() for .xz files, LZMA_CONCATENATED + * should be used when decompressing normal standalone .lz files. + * + * The .lz format allows putting non-.lz data at the end of a file after at + * least one valid .lz member. That is, one can append custom data at the end + * of a .lz file and the decoder is required to ignore it. In liblzma this + * is relevant only when LZMA_CONCATENATED is used. In that case lzma_code() + * will return LZMA_STREAM_END and leave lzma_stream.next_in pointing to + * the first byte of the non-.lz data. An exception to this is if the first + * 1-3 bytes of the non-.lz data are identical to the .lz magic bytes + * (0x4C, 0x5A, 0x49, 0x50; "LZIP" in US-ASCII). In such a case the 1-3 bytes + * will have been ignored by lzma_code(). If one wishes to locate the non-.lz + * data reliably, one must ensure that the first byte isn't 0x4C. Actually + * one should ensure that none of the first four bytes of trailing data are + * equal to the magic bytes because lzip >= 1.20 requires it by default. + * + * \return - LZMA_OK: Initialization was successful. + * - LZMA_MEM_ERROR: Cannot allocate memory. + * - LZMA_OPTIONS_ERROR: Unsupported flags + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_lzip_decoder( + lzma_stream *strm, uint64_t memlimit, uint32_t flags) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Stream decoder + * + * \param memlimit Pointer to how much memory the decoder is allowed + * to allocate. The value pointed by this pointer is + * modified if and only if LZMA_MEMLIMIT_ERROR is + * returned. + * \param flags Bitwise-or of zero or more of the decoder flags: + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * LZMA_IGNORE_CHECK, LZMA_CONCATENATED, + * LZMA_FAIL_FAST. Note that LZMA_TELL_ANY_CHECK + * is not allowed and will return LZMA_PROG_ERROR. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if decoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_FORMAT_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_DATA_ERROR + * - LZMA_NO_CHECK: This can be returned only if using + * the LZMA_TELL_NO_CHECK flag. + * - LZMA_UNSUPPORTED_CHECK: This can be returned only if using + * the LZMA_TELL_UNSUPPORTED_CHECK flag. + * - LZMA_MEM_ERROR + * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. + * The minimum required memlimit value was stored to *memlimit. + * - LZMA_BUF_ERROR: Output buffer was too small. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_stream_buffer_decode( + uint64_t *memlimit, uint32_t flags, + const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief MicroLZMA decoder + * + * See lzma_microlzma_decoder() for more information. + * + * The lzma_code() usage with this decoder is completely normal. The + * special behavior of lzma_code() applies to lzma_microlzma_encoder() only. + * + * \param strm Pointer to properly prepared lzma_stream + * \param comp_size Compressed size of the MicroLZMA stream. + * The caller must somehow know this exactly. + * \param uncomp_size Uncompressed size of the MicroLZMA stream. + * If the exact uncompressed size isn't known, this + * can be set to a value that is at most as big as + * the exact uncompressed size would be, but then the + * next argument uncomp_size_is_exact must be false. + * \param uncomp_size_is_exact + * If true, uncomp_size must be exactly correct. + * This will improve error detection at the end of + * the stream. If the exact uncompressed size isn't + * known, this must be false. uncomp_size must still + * be at most as big as the exact uncompressed size + * is. Setting this to false when the exact size is + * known will work but error detection at the end of + * the stream will be weaker. + * \param dict_size LZMA dictionary size that was used when + * compressing the data. It is OK to use a bigger + * value too but liblzma will then allocate more + * memory than would actually be required and error + * detection will be slightly worse. (Note that with + * the implementation in XZ Embedded it doesn't + * affect the memory usage if one specifies bigger + * dictionary than actually required.) + */ +extern LZMA_API(lzma_ret) lzma_microlzma_decoder( + lzma_stream *strm, uint64_t comp_size, + uint64_t uncomp_size, lzma_bool uncomp_size_is_exact, + uint32_t dict_size); diff --git a/src/liblzma/api/lzma/delta.h b/src/liblzma/api/lzma/delta.h new file mode 100644 index 0000000..592fc4f --- /dev/null +++ b/src/liblzma/api/lzma/delta.h @@ -0,0 +1,77 @@ +/** + * \file lzma/delta.h + * \brief Delta filter + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Filter ID + * + * Filter ID of the Delta filter. This is used as lzma_filter.id. + */ +#define LZMA_FILTER_DELTA LZMA_VLI_C(0x03) + + +/** + * \brief Type of the delta calculation + * + * Currently only byte-wise delta is supported. Other possible types could + * be, for example, delta of 16/32/64-bit little/big endian integers, but + * these are not currently planned since byte-wise delta is almost as good. + */ +typedef enum { + LZMA_DELTA_TYPE_BYTE +} lzma_delta_type; + + +/** + * \brief Options for the Delta filter + * + * These options are needed by both encoder and decoder. + */ +typedef struct { + /** For now, this must always be LZMA_DELTA_TYPE_BYTE. */ + lzma_delta_type type; + + /** + * \brief Delta distance + * + * With the only currently supported type, LZMA_DELTA_TYPE_BYTE, + * the distance is as bytes. + * + * Examples: + * - 16-bit stereo audio: distance = 4 bytes + * - 24-bit RGB image data: distance = 3 bytes + */ + uint32_t dist; +# define LZMA_DELTA_DIST_MIN 1 +# define LZMA_DELTA_DIST_MAX 256 + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the names + * of these variables may change. These are and will never be used + * when type is LZMA_DELTA_TYPE_BYTE, so it is safe to leave these + * uninitialized. + */ + uint32_t reserved_int1; + uint32_t reserved_int2; + uint32_t reserved_int3; + uint32_t reserved_int4; + void *reserved_ptr1; + void *reserved_ptr2; + +} lzma_options_delta; diff --git a/src/liblzma/api/lzma/filter.h b/src/liblzma/api/lzma/filter.h new file mode 100644 index 0000000..58c83bf --- /dev/null +++ b/src/liblzma/api/lzma/filter.h @@ -0,0 +1,714 @@ +/** + * \file lzma/filter.h + * \brief Common filter related types and functions + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Maximum number of filters in a chain + * + * A filter chain can have 1-4 filters, of which three are allowed to change + * the size of the data. Usually only one or two filters are needed. + */ +#define LZMA_FILTERS_MAX 4 + + +/** + * \brief Filter options + * + * This structure is used to pass Filter ID and a pointer filter's + * options to liblzma. A few functions work with a single lzma_filter + * structure, while most functions expect a filter chain. + * + * A filter chain is indicated with an array of lzma_filter structures. + * The array is terminated with .id = LZMA_VLI_UNKNOWN. Thus, the filter + * array must have LZMA_FILTERS_MAX + 1 elements (that is, five) to + * be able to hold any arbitrary filter chain. This is important when + * using lzma_block_header_decode() from block.h, because too small + * array would make liblzma write past the end of the filters array. + */ +typedef struct { + /** + * \brief Filter ID + * + * Use constants whose name begin with `LZMA_FILTER_' to specify + * different filters. In an array of lzma_filter structures, use + * LZMA_VLI_UNKNOWN to indicate end of filters. + * + * \note This is not an enum, because on some systems enums + * cannot be 64-bit. + */ + lzma_vli id; + + /** + * \brief Pointer to filter-specific options structure + * + * If the filter doesn't need options, set this to NULL. If id is + * set to LZMA_VLI_UNKNOWN, options is ignored, and thus + * doesn't need be initialized. + */ + void *options; + +} lzma_filter; + + +/** + * \brief Test if the given Filter ID is supported for encoding + * + * Return true if the give Filter ID is supported for encoding by this + * liblzma build. Otherwise false is returned. + * + * There is no way to list which filters are available in this particular + * liblzma version and build. It would be useless, because the application + * couldn't know what kind of options the filter would need. + */ +extern LZMA_API(lzma_bool) lzma_filter_encoder_is_supported(lzma_vli id) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Test if the given Filter ID is supported for decoding + * + * Return true if the give Filter ID is supported for decoding by this + * liblzma build. Otherwise false is returned. + */ +extern LZMA_API(lzma_bool) lzma_filter_decoder_is_supported(lzma_vli id) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Copy the filters array + * + * Copy the Filter IDs and filter-specific options from src to dest. + * Up to LZMA_FILTERS_MAX filters are copied, plus the terminating + * .id == LZMA_VLI_UNKNOWN. Thus, dest should have at least + * LZMA_FILTERS_MAX + 1 elements space unless the caller knows that + * src is smaller than that. + * + * Unless the filter-specific options is NULL, the Filter ID has to be + * supported by liblzma, because liblzma needs to know the size of every + * filter-specific options structure. The filter-specific options are not + * validated. If options is NULL, any unsupported Filter IDs are copied + * without returning an error. + * + * Old filter-specific options in dest are not freed, so dest doesn't + * need to be initialized by the caller in any way. + * + * If an error occurs, memory possibly already allocated by this function + * is always freed. liblzma versions older than 5.2.7 may modify the dest + * array and leave its contents in an undefined state if an error occurs. + * liblzma 5.2.7 and newer only modify the dest array when returning LZMA_OK. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR: Unsupported Filter ID and its options + * is not NULL. + * - LZMA_PROG_ERROR: src or dest is NULL. + */ +extern LZMA_API(lzma_ret) lzma_filters_copy( + const lzma_filter *src, lzma_filter *dest, + const lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Free the options in the array of lzma_filter structures + * + * This frees the filter chain options. The filters array itself is not freed. + * + * The filters array must have at most LZMA_FILTERS_MAX + 1 elements + * including the terminating element which must have .id = LZMA_VLI_UNKNOWN. + * For all elements before the terminating element: + * - options will be freed using the given lzma_allocator or, + * if allocator is NULL, using free(). + * - options will be set to NULL. + * - id will be set to LZMA_VLI_UNKNOWN. + * + * If filters is NULL, this does nothing but remember that this never frees + * the filters array itself. + */ +extern LZMA_API(void) lzma_filters_free( + lzma_filter *filters, const lzma_allocator *allocator) + lzma_nothrow; + + +/** + * \brief Calculate approximate memory requirements for raw encoder + * + * This function can be used to calculate the memory requirements for + * Block and Stream encoders too because Block and Stream encoders don't + * need significantly more memory than raw encoder. + * + * \param filters Array of filters terminated with + * .id == LZMA_VLI_UNKNOWN. + * + * \return Number of bytes of memory required for the given + * filter chain when encoding. If an error occurs, + * for example due to unsupported filter chain, + * UINT64_MAX is returned. + */ +extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Calculate approximate memory requirements for raw decoder + * + * This function can be used to calculate the memory requirements for + * Block and Stream decoders too because Block and Stream decoders don't + * need significantly more memory than raw decoder. + * + * \param filters Array of filters terminated with + * .id == LZMA_VLI_UNKNOWN. + * + * \return Number of bytes of memory required for the given + * filter chain when decoding. If an error occurs, + * for example due to unsupported filter chain, + * UINT64_MAX is returned. + */ +extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize raw encoder + * + * This function may be useful when implementing custom file formats. + * + * \param strm Pointer to properly prepared lzma_stream + * \param filters Array of lzma_filter structures. The end of the + * array must be marked with .id = LZMA_VLI_UNKNOWN. + * + * The `action' with lzma_code() can be LZMA_RUN, LZMA_SYNC_FLUSH (if the + * filter chain supports it), or LZMA_FINISH. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_raw_encoder( + lzma_stream *strm, const lzma_filter *filters) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize raw decoder + * + * The initialization of raw decoder goes similarly to raw encoder. + * + * The `action' with lzma_code() can be LZMA_RUN or LZMA_FINISH. Using + * LZMA_FINISH is not required, it is supported just for convenience. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_raw_decoder( + lzma_stream *strm, const lzma_filter *filters) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Update the filter chain in the encoder + * + * This function may be called after lzma_code() has returned LZMA_STREAM_END + * when LZMA_FULL_BARRIER, LZMA_FULL_FLUSH, or LZMA_SYNC_FLUSH was used: + * + * - After LZMA_FULL_BARRIER or LZMA_FULL_FLUSH: Single-threaded .xz Stream + * encoder (lzma_stream_encoder()) and (since liblzma 5.4.0) multi-threaded + * Stream encoder (lzma_stream_encoder_mt()) allow setting a new filter + * chain to be used for the next Block(s). + * + * - After LZMA_SYNC_FLUSH: Raw encoder (lzma_raw_encoder()), + * Block encocder (lzma_block_encoder()), and single-threaded .xz Stream + * encoder (lzma_stream_encoder()) allow changing certain filter-specific + * options in the middle of encoding. The actual filters in the chain + * (Filter IDs) must not be changed! Currently only the lc, lp, and pb + * options of LZMA2 (not LZMA1) can be changed this way. + * + * - In the future some filters might allow changing some of their options + * without any barrier or flushing but currently such filters don't exist. + * + * This function may also be called when no data has been compressed yet + * although this is rarely useful. In that case, this function will behave + * as if LZMA_FULL_FLUSH (Stream encoders) or LZMA_SYNC_FLUSH (Raw or Block + * encoder) had been used right before calling this function. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_MEMLIMIT_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_filters_update( + lzma_stream *strm, const lzma_filter *filters) lzma_nothrow; + + +/** + * \brief Single-call raw encoder + * + * \param filters Array of lzma_filter structures. The end of the + * array must be marked with .id = LZMA_VLI_UNKNOWN. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_size Size of the input buffer + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Not enough output buffer space. + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + * + * \note There is no function to calculate how big output buffer + * would surely be big enough. (lzma_stream_buffer_bound() + * works only for lzma_stream_buffer_encode(); raw encoder + * won't necessarily meet that bound.) + */ +extern LZMA_API(lzma_ret) lzma_raw_buffer_encode( + const lzma_filter *filters, const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, uint8_t *out, + size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Single-call raw decoder + * + * \param filters Array of lzma_filter structures. The end of the + * array must be marked with .id = LZMA_VLI_UNKNOWN. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + */ +extern LZMA_API(lzma_ret) lzma_raw_buffer_decode( + const lzma_filter *filters, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Get the size of the Filter Properties field + * + * This function may be useful when implementing custom file formats + * using the raw encoder and decoder. + * + * \param size Pointer to uint32_t to hold the size of the properties + * \param filter Filter ID and options (the size of the properties may + * vary depending on the options) + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + * + * \note This function validates the Filter ID, but does not + * necessarily validate the options. Thus, it is possible + * that this returns LZMA_OK while the following call to + * lzma_properties_encode() returns LZMA_OPTIONS_ERROR. + */ +extern LZMA_API(lzma_ret) lzma_properties_size( + uint32_t *size, const lzma_filter *filter) lzma_nothrow; + + +/** + * \brief Encode the Filter Properties field + * + * \param filter Filter ID and options + * \param props Buffer to hold the encoded options. The size of + * buffer must have been already determined with + * lzma_properties_size(). + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR + * + * \note Even this function won't validate more options than actually + * necessary. Thus, it is possible that encoding the properties + * succeeds but using the same options to initialize the encoder + * will fail. + * + * \note If lzma_properties_size() indicated that the size + * of the Filter Properties field is zero, calling + * lzma_properties_encode() is not required, but it + * won't do any harm either. + */ +extern LZMA_API(lzma_ret) lzma_properties_encode( + const lzma_filter *filter, uint8_t *props) lzma_nothrow; + + +/** + * \brief Decode the Filter Properties field + * + * \param filter filter->id must have been set to the correct + * Filter ID. filter->options doesn't need to be + * initialized (it's not freed by this function). The + * decoded options will be stored in filter->options; + * it's application's responsibility to free it when + * appropriate. filter->options is set to NULL if + * there are no properties or if an error occurs. + * \param allocator Custom memory allocator used to allocate the + * options. Set to NULL to use the default malloc(), + * and in case of an error, also free(). + * \param props Input buffer containing the properties. + * \param props_size Size of the properties. This must be the exact + * size; giving too much or too little input will + * return LZMA_OPTIONS_ERROR. + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + */ +extern LZMA_API(lzma_ret) lzma_properties_decode( + lzma_filter *filter, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size) lzma_nothrow; + + +/** + * \brief Calculate encoded size of a Filter Flags field + * + * Knowing the size of Filter Flags is useful to know when allocating + * memory to hold the encoded Filter Flags. + * + * \param size Pointer to integer to hold the calculated size + * \param filter Filter ID and associated options whose encoded + * size is to be calculated + * + * \return - LZMA_OK: *size set successfully. Note that this doesn't + * guarantee that filter->options is valid, thus + * lzma_filter_flags_encode() may still fail. + * - LZMA_OPTIONS_ERROR: Unknown Filter ID or unsupported options. + * - LZMA_PROG_ERROR: Invalid options + * + * \note If you need to calculate size of List of Filter Flags, + * you need to loop over every lzma_filter entry. + */ +extern LZMA_API(lzma_ret) lzma_filter_flags_size( + uint32_t *size, const lzma_filter *filter) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Encode Filter Flags into given buffer + * + * In contrast to some functions, this doesn't allocate the needed buffer. + * This is due to how this function is used internally by liblzma. + * + * \param filter Filter ID and options to be encoded + * \param out Beginning of the output buffer + * \param out_pos out[*out_pos] is the next write position. This + * is updated by the encoder. + * \param out_size out[out_size] is the first byte to not write. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_OPTIONS_ERROR: Invalid or unsupported options. + * - LZMA_PROG_ERROR: Invalid options or not enough output + * buffer space (you should have checked it with + * lzma_filter_flags_size()). + */ +extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filter, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Filter Flags from given buffer + * + * The decoded result is stored into *filter. The old value of + * filter->options is not free()d. + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_filter_flags_decode( + lzma_filter *filter, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/*********** + * Strings * + ***********/ + +/** + * \brief Allow or show all filters + * + * By default only the filters supported in the .xz format are accept by + * lzma_str_to_filters() or shown by lzma_str_list_filters(). + */ +#define LZMA_STR_ALL_FILTERS UINT32_C(0x01) + + +/** + * \brief Do not validate the filter chain in lzma_str_to_filters() + * + * By default lzma_str_to_filters() can return an error if the filter chain + * as a whole isn't usable in the .xz format or in the raw encoder or decoder. + * With this flag the validation is skipped (this doesn't affect the handling + * of the individual filter options). + */ +#define LZMA_STR_NO_VALIDATION UINT32_C(0x02) + + +/** + * \brief Stringify encoder options + * + * Show the filter-specific options that the encoder will use. + * This may be useful for verbose diagnostic messages. + * + * Note that if options were decoded from .xz headers then the encoder options + * may be undefined. This flag shouldn't be used in such a situation. + */ +#define LZMA_STR_ENCODER UINT32_C(0x10) + + +/** + * \brief Stringify decoder options + * + * Show the filter-specific options that the decoder will use. + * This may be useful for showing what filter options were decoded + * from file headers. + */ +#define LZMA_STR_DECODER UINT32_C(0x20) + + +/** + * \brief Produce xz-compatible getopt_long() syntax + * + * That is, "delta:dist=2 lzma2:dict=4MiB,pb=1,lp=1" becomes + * "--delta=dist=2 --lzma2=dict=4MiB,pb=1,lp=1". + * + * This syntax is compatible with xz 5.0.0 as long as the filters and + * their options are supported too. + */ +#define LZMA_STR_GETOPT_LONG UINT32_C(0x40) + + +/** + * \brief Use two dashes "--" instead of a space to separate filters + * + * That is, "delta:dist=2 lzma2:pb=1,lp=1" becomes + * "delta:dist=2--lzma2:pb=1,lp=1". This looks slightly odd but this + * kind of strings should be usable on the command line without quoting. + * However, it is possible that future versions with new filter options + * might produce strings that require shell quoting anyway as the exact + * set of possible characters isn't frozen for now. + * + * It is guaranteed that the single quote (') will never be used in + * filter chain strings (even if LZMA_STR_NO_SPACES isn't used). + */ +#define LZMA_STR_NO_SPACES UINT32_C(0x80) + + +/** + * \brief Convert a string to a filter chain + * + * This tries to make it easier to write applications that allow users + * to set custom compression options. This only handles the filter + * configuration (including presets) but not the number of threads, + * block size, check type, or memory limits. + * + * The input string can be either a preset or a filter chain. Presets + * begin with a digit 0-9 and may be followed by zero or more flags + * which are lower-case letters. Currently only "e" is supported, matching + * LZMA_PRESET_EXTREME. For partial xz command line syntax compatibility, + * a preset string may start with a single dash "-". + * + * A filter chain consists of one or more "filtername:opt1=value1,opt2=value2" + * strings separated by one or more spaces. Leading and trailing spaces are + * ignored. All names and values must be lower-case. Extra commas in the + * option list are ignored. The order of filters is significant: when + * encoding, the uncompressed input data goes to the leftmost filter first. + * Normally "lzma2" is the last filter in the chain. + * + * If one wishes to avoid spaces, for example, to avoid shell quoting, + * it is possible to use two dashes "--" instead of spaces to separate + * the filters. + * + * For xz command line compatibility, each filter may be prefixed with + * two dashes "--" and the colon ":" separating the filter name from + * the options may be replaced with an equals sign "=". + * + * By default, only filters that can be used in the .xz format are accepted. + * To allow all filters (LZMA1) use the flag LZMA_STR_ALL_FILTERS. + * + * By default, very basic validation is done for the filter chain as a whole, + * for example, that LZMA2 is only used as the last filter in the chain. + * The validation isn't perfect though and it's possible that this function + * succeeds but using the filter chain for encoding or decoding will still + * result in LZMA_OPTIONS_ERROR. To disable this validation, use the flag + * LZMA_STR_NO_VALIDATION. + * + * The available filter names and their options are available via + * lzma_str_list_filters(). See the xz man page for the description + * of filter names and options. + * + * \param str User-supplied string describing a preset or + * a filter chain. If a default value is needed and + * you don't know what would be good, use "6" since + * that is the default preset in xz too. + * \param error_pos If this isn't NULL, this value will be set on + * both success and on all errors. This tells the + * location of the error in the string. This is + * an int to make it straightforward to use this + * as printf() field width. The value is guaranteed + * to be in the range [0, INT_MAX] even if strlen(str) + * somehow was greater than INT_MAX. + * \param filters An array of lzma_filter structures. There must + * be LZMA_FILTERS_MAX + 1 (that is, five) elements + * in the array. The old contents are ignored so it + * doesn't need to be initialized. This array is + * modified only if this function returns LZMA_OK. + * Once the allocated filter options are no longer + * needed, lzma_filters_free() can be used to free the + * options (it doesn't free the filters array itself). + * \param flags Bitwise-or of zero or more of the flags + * LZMA_STR_ALL_FILTERS and LZMA_STR_NO_VALIDATION. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * + * \return On success, NULL is returned. On error, a statically-allocated + * error message is returned which together with the error_pos + * should give some idea what is wrong. + * + * For command line applications, below is an example how an error message + * can be displayed. Note the use of an empty string for the field width. + * If "^" was used there it would create an off-by-one error except at + * the very beginning of the line. + * + * \code{.c} + * const char *str = ...; // From user + * lzma_filter filters[LZMA_FILTERS_MAX + 1]; + * int pos; + * const char *msg = lzma_str_to_filters(str, &pos, filters, 0, NULL); + * if (msg != NULL) { + * printf("%s: Error in XZ compression options:\n", argv[0]); + * printf("%s: %s\n", argv[0], str); + * printf("%s: %*s^\n", argv[0], errpos, ""); + * printf("%s: %s\n", argv[0], msg); + * } + * \endcode + */ +extern LZMA_API(const char *) lzma_str_to_filters( + const char *str, int *error_pos, lzma_filter *filters, + uint32_t flags, const lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Convert a filter chain to a string + * + * Use cases: + * + * - Verbose output showing the full encoder options to the user + * (use LZMA_STR_ENCODER in flags) + * + * - Showing the filters and options that are required to decode a file + * (use LZMA_STR_DECODER in flags) + * + * - Showing the filter names without any options in informational messages + * where the technical details aren't important (no flags). In this case + * the .options in the filters array are ignored and may be NULL even if + * a filter has a mandatory options structure. + * + * Note that even if the filter chain was specified using a preset, + * the resulting filter chain isn't reversed to a preset. So if you + * specify "6" to lzma_str_to_filters() then lzma_str_from_filters() + * will produce a string containing "lzma2". + * + * \param str On success *str will be set to point to an + * allocated string describing the given filter + * chain. Old value is ignored. On error *str is + * always set to NULL. + * \param filters Array of 1-4 filters and a terminating element + * with .id = LZMA_VLI_UNKNOWN. + * \param flags Bitwise-or of zero or more of the flags + * LZMA_STR_ENCODER, LZMA_STR_DECODER, + * LZMA_STR_GETOPT_LONG, and LZMA_STR_NO_SPACES. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR: Empty filter chain + * (filters[0].id == LZMA_VLI_UNKNOWN) or the filter chain + * includes a Filter ID that is not supported by this function. + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_str_from_filters( + char **str, const lzma_filter *filters, uint32_t flags, + const lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief List available filters and/or their options (for help message) + * + * If a filter_id is given then only one line is created which contains the + * filter name. If LZMA_STR_ENCODER or LZMA_STR_DECODER is used then the + * options required for encoding or decoding are listed on the same line too. + * + * If filter_id is LZMA_VLI_UNKNOWN then all supported .xz-compatible filters + * are listed: + * + * - If neither LZMA_STR_ENCODER nor LZMA_STR_DECODER is used then + * the supported filter names are listed on a single line separated + * by spaces. + * + * - If LZMA_STR_ENCODER or LZMA_STR_DECODER is used then filters and + * the supported options are listed one filter per line. There won't + * be a '\n' after the last filter. + * + * - If LZMA_STR_ALL_FILTERS is used then the list will include also + * those filters that cannot be used in the .xz format (LZMA1). + * + * \param str On success *str will be set to point to an + * allocated string listing the filters and options. + * Old value is ignored. On error *str is always set + * to NULL. + * \param filter_id Filter ID or LZMA_VLI_UNKNOWN. + * \param flags Bitwise-or of zero or more of the flags + * LZMA_STR_ALL_FILTERS, LZMA_STR_ENCODER, + * LZMA_STR_DECODER, and LZMA_STR_GETOPT_LONG. + * \param allocator lzma_allocator for custom allocator functions. + * Set to NULL to use malloc() and free(). + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR: Unsupported filter_id or flags + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_str_list_filters( + char **str, lzma_vli filter_id, uint32_t flags, + const lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; diff --git a/src/liblzma/api/lzma/hardware.h b/src/liblzma/api/lzma/hardware.h new file mode 100644 index 0000000..7040aae --- /dev/null +++ b/src/liblzma/api/lzma/hardware.h @@ -0,0 +1,64 @@ +/** + * \file lzma/hardware.h + * \brief Hardware information + * + * Since liblzma can consume a lot of system resources, it also provides + * ways to limit the resource usage. Applications linking against liblzma + * need to do the actual decisions how much resources to let liblzma to use. + * To ease making these decisions, liblzma provides functions to find out + * the relevant capabilities of the underlying hardware. Currently there + * is only a function to find out the amount of RAM, but in the future there + * will be also a function to detect how many concurrent threads the system + * can run. + * + * \note On some operating systems, these function may temporarily + * load a shared library or open file descriptor(s) to find out + * the requested hardware information. Unless the application + * assumes that specific file descriptors are not touched by + * other threads, this should have no effect on thread safety. + * Possible operations involving file descriptors will restart + * the syscalls if they return EINTR. + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Get the total amount of physical memory (RAM) in bytes + * + * This function may be useful when determining a reasonable memory + * usage limit for decompressing or how much memory it is OK to use + * for compressing. + * + * \return On success, the total amount of physical memory in bytes + * is returned. If the amount of RAM cannot be determined, + * zero is returned. This can happen if an error occurs + * or if there is no code in liblzma to detect the amount + * of RAM on the specific operating system. + */ +extern LZMA_API(uint64_t) lzma_physmem(void) lzma_nothrow; + + +/** + * \brief Get the number of processor cores or threads + * + * This function may be useful when determining how many threads to use. + * If the hardware supports more than one thread per CPU core, the number + * of hardware threads is returned if that information is available. + * + * \return On success, the number of available CPU threads or cores is + * returned. If this information isn't available or an error + * occurs, zero is returned. + */ +extern LZMA_API(uint32_t) lzma_cputhreads(void) lzma_nothrow; diff --git a/src/liblzma/api/lzma/index.h b/src/liblzma/api/lzma/index.h new file mode 100644 index 0000000..144d416 --- /dev/null +++ b/src/liblzma/api/lzma/index.h @@ -0,0 +1,752 @@ +/** + * \file lzma/index.h + * \brief Handling of .xz Index and related information + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Opaque data type to hold the Index(es) and other information + * + * lzma_index often holds just one .xz Index and possibly the Stream Flags + * of the same Stream and size of the Stream Padding field. However, + * multiple lzma_indexes can be concatenated with lzma_index_cat() and then + * there may be information about multiple Streams in the same lzma_index. + * + * Notes about thread safety: Only one thread may modify lzma_index at + * a time. All functions that take non-const pointer to lzma_index + * modify it. As long as no thread is modifying the lzma_index, getting + * information from the same lzma_index can be done from multiple threads + * at the same time with functions that take a const pointer to + * lzma_index or use lzma_index_iter. The same iterator must be used + * only by one thread at a time, of course, but there can be as many + * iterators for the same lzma_index as needed. + */ +typedef struct lzma_index_s lzma_index; + + +/** + * \brief Iterator to get information about Blocks and Streams + */ +typedef struct { + struct { + /** + * \brief Pointer to Stream Flags + * + * This is NULL if Stream Flags have not been set for + * this Stream with lzma_index_stream_flags(). + */ + const lzma_stream_flags *flags; + + const void *reserved_ptr1; + const void *reserved_ptr2; + const void *reserved_ptr3; + + /** + * \brief Stream number in the lzma_index + * + * The first Stream is 1. + */ + lzma_vli number; + + /** + * \brief Number of Blocks in the Stream + * + * If this is zero, the block structure below has + * undefined values. + */ + lzma_vli block_count; + + /** + * \brief Compressed start offset of this Stream + * + * The offset is relative to the beginning of the lzma_index + * (i.e. usually the beginning of the .xz file). + */ + lzma_vli compressed_offset; + + /** + * \brief Uncompressed start offset of this Stream + * + * The offset is relative to the beginning of the lzma_index + * (i.e. usually the beginning of the .xz file). + */ + lzma_vli uncompressed_offset; + + /** + * \brief Compressed size of this Stream + * + * This includes all headers except the possible + * Stream Padding after this Stream. + */ + lzma_vli compressed_size; + + /** + * \brief Uncompressed size of this Stream + */ + lzma_vli uncompressed_size; + + /** + * \brief Size of Stream Padding after this Stream + * + * If it hasn't been set with lzma_index_stream_padding(), + * this defaults to zero. Stream Padding is always + * a multiple of four bytes. + */ + lzma_vli padding; + + lzma_vli reserved_vli1; + lzma_vli reserved_vli2; + lzma_vli reserved_vli3; + lzma_vli reserved_vli4; + } stream; + + struct { + /** + * \brief Block number in the file + * + * The first Block is 1. + */ + lzma_vli number_in_file; + + /** + * \brief Compressed start offset of this Block + * + * This offset is relative to the beginning of the + * lzma_index (i.e. usually the beginning of the .xz file). + * Normally this is where you should seek in the .xz file + * to start decompressing this Block. + */ + lzma_vli compressed_file_offset; + + /** + * \brief Uncompressed start offset of this Block + * + * This offset is relative to the beginning of the lzma_index + * (i.e. usually the beginning of the .xz file). + * + * When doing random-access reading, it is possible that + * the target offset is not exactly at Block boundary. One + * will need to compare the target offset against + * uncompressed_file_offset or uncompressed_stream_offset, + * and possibly decode and throw away some amount of data + * before reaching the target offset. + */ + lzma_vli uncompressed_file_offset; + + /** + * \brief Block number in this Stream + * + * The first Block is 1. + */ + lzma_vli number_in_stream; + + /** + * \brief Compressed start offset of this Block + * + * This offset is relative to the beginning of the Stream + * containing this Block. + */ + lzma_vli compressed_stream_offset; + + /** + * \brief Uncompressed start offset of this Block + * + * This offset is relative to the beginning of the Stream + * containing this Block. + */ + lzma_vli uncompressed_stream_offset; + + /** + * \brief Uncompressed size of this Block + * + * You should pass this to the Block decoder if you will + * decode this Block. It will allow the Block decoder to + * validate the uncompressed size. + */ + lzma_vli uncompressed_size; + + /** + * \brief Unpadded size of this Block + * + * You should pass this to the Block decoder if you will + * decode this Block. It will allow the Block decoder to + * validate the unpadded size. + */ + lzma_vli unpadded_size; + + /** + * \brief Total compressed size + * + * This includes all headers and padding in this Block. + * This is useful if you need to know how many bytes + * the Block decoder will actually read. + */ + lzma_vli total_size; + + lzma_vli reserved_vli1; + lzma_vli reserved_vli2; + lzma_vli reserved_vli3; + lzma_vli reserved_vli4; + + const void *reserved_ptr1; + const void *reserved_ptr2; + const void *reserved_ptr3; + const void *reserved_ptr4; + } block; + + /* + * Internal data which is used to store the state of the iterator. + * The exact format may vary between liblzma versions, so don't + * touch these in any way. + */ + union { + const void *p; + size_t s; + lzma_vli v; + } internal[6]; +} lzma_index_iter; + + +/** + * \brief Operation mode for lzma_index_iter_next() + */ +typedef enum { + LZMA_INDEX_ITER_ANY = 0, + /**< + * \brief Get the next Block or Stream + * + * Go to the next Block if the current Stream has at least + * one Block left. Otherwise go to the next Stream even if + * it has no Blocks. If the Stream has no Blocks + * (lzma_index_iter.stream.block_count == 0), + * lzma_index_iter.block will have undefined values. + */ + + LZMA_INDEX_ITER_STREAM = 1, + /**< + * \brief Get the next Stream + * + * Go to the next Stream even if the current Stream has + * unread Blocks left. If the next Stream has at least one + * Block, the iterator will point to the first Block. + * If there are no Blocks, lzma_index_iter.block will have + * undefined values. + */ + + LZMA_INDEX_ITER_BLOCK = 2, + /**< + * \brief Get the next Block + * + * Go to the next Block if the current Stream has at least + * one Block left. If the current Stream has no Blocks left, + * the next Stream with at least one Block is located and + * the iterator will be made to point to the first Block of + * that Stream. + */ + + LZMA_INDEX_ITER_NONEMPTY_BLOCK = 3 + /**< + * \brief Get the next non-empty Block + * + * This is like LZMA_INDEX_ITER_BLOCK except that it will + * skip Blocks whose Uncompressed Size is zero. + */ + +} lzma_index_iter_mode; + + +/** + * \brief Calculate memory usage of lzma_index + * + * On disk, the size of the Index field depends on both the number of Records + * stored and how big values the Records store (due to variable-length integer + * encoding). When the Index is kept in lzma_index structure, the memory usage + * depends only on the number of Records/Blocks stored in the Index(es), and + * in case of concatenated lzma_indexes, the number of Streams. The size in + * RAM is almost always significantly bigger than in the encoded form on disk. + * + * This function calculates an approximate amount of memory needed hold + * the given number of Streams and Blocks in lzma_index structure. This + * value may vary between CPU architectures and also between liblzma versions + * if the internal implementation is modified. + */ +extern LZMA_API(uint64_t) lzma_index_memusage( + lzma_vli streams, lzma_vli blocks) lzma_nothrow; + + +/** + * \brief Calculate the memory usage of an existing lzma_index + * + * This is a shorthand for lzma_index_memusage(lzma_index_stream_count(i), + * lzma_index_block_count(i)). + */ +extern LZMA_API(uint64_t) lzma_index_memused(const lzma_index *i) + lzma_nothrow; + + +/** + * \brief Allocate and initialize a new lzma_index structure + * + * \return On success, a pointer to an empty initialized lzma_index is + * returned. If allocation fails, NULL is returned. + */ +extern LZMA_API(lzma_index *) lzma_index_init(const lzma_allocator *allocator) + lzma_nothrow; + + +/** + * \brief Deallocate lzma_index + * + * If i is NULL, this does nothing. + */ +extern LZMA_API(void) lzma_index_end( + lzma_index *i, const lzma_allocator *allocator) lzma_nothrow; + + +/** + * \brief Add a new Block to lzma_index + * + * \param i Pointer to a lzma_index structure + * \param allocator Pointer to lzma_allocator, or NULL to + * use malloc() + * \param unpadded_size Unpadded Size of a Block. This can be + * calculated with lzma_block_unpadded_size() + * after encoding or decoding the Block. + * \param uncompressed_size Uncompressed Size of a Block. This can be + * taken directly from lzma_block structure + * after encoding or decoding the Block. + * + * Appending a new Block does not invalidate iterators. For example, + * if an iterator was pointing to the end of the lzma_index, after + * lzma_index_append() it is possible to read the next Block with + * an existing iterator. + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_DATA_ERROR: Compressed or uncompressed size of the + * Stream or size of the Index field would grow too big. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_append( + lzma_index *i, const lzma_allocator *allocator, + lzma_vli unpadded_size, lzma_vli uncompressed_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Set the Stream Flags + * + * Set the Stream Flags of the last (and typically the only) Stream + * in lzma_index. This can be useful when reading information from the + * lzma_index, because to decode Blocks, knowing the integrity check type + * is needed. + * + * The given Stream Flags are copied into internal preallocated structure + * in the lzma_index, thus the caller doesn't need to keep the *stream_flags + * available after calling this function. + * + * \return - LZMA_OK + * - LZMA_OPTIONS_ERROR: Unsupported stream_flags->version. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_stream_flags( + lzma_index *i, const lzma_stream_flags *stream_flags) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Get the types of integrity Checks + * + * If lzma_index_stream_flags() is used to set the Stream Flags for + * every Stream, lzma_index_checks() can be used to get a bitmask to + * indicate which Check types have been used. It can be useful e.g. if + * showing the Check types to the user. + * + * The bitmask is 1 << check_id, e.g. CRC32 is 1 << 1 and SHA-256 is 1 << 10. + */ +extern LZMA_API(uint32_t) lzma_index_checks(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Set the amount of Stream Padding + * + * Set the amount of Stream Padding of the last (and typically the only) + * Stream in the lzma_index. This is needed when planning to do random-access + * reading within multiple concatenated Streams. + * + * By default, the amount of Stream Padding is assumed to be zero bytes. + * + * \return - LZMA_OK + * - LZMA_DATA_ERROR: The file size would grow too big. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_stream_padding( + lzma_index *i, lzma_vli stream_padding) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Get the number of Streams + */ +extern LZMA_API(lzma_vli) lzma_index_stream_count(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the number of Blocks + * + * This returns the total number of Blocks in lzma_index. To get number + * of Blocks in individual Streams, use lzma_index_iter. + */ +extern LZMA_API(lzma_vli) lzma_index_block_count(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the size of the Index field as bytes + * + * This is needed to verify the Backward Size field in the Stream Footer. + */ +extern LZMA_API(lzma_vli) lzma_index_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the total size of the Stream + * + * If multiple lzma_indexes have been combined, this works as if the Blocks + * were in a single Stream. This is useful if you are going to combine + * Blocks from multiple Streams into a single new Stream. + */ +extern LZMA_API(lzma_vli) lzma_index_stream_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the total size of the Blocks + * + * This doesn't include the Stream Header, Stream Footer, Stream Padding, + * or Index fields. + */ +extern LZMA_API(lzma_vli) lzma_index_total_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the total size of the file + * + * When no lzma_indexes have been combined with lzma_index_cat() and there is + * no Stream Padding, this function is identical to lzma_index_stream_size(). + * If multiple lzma_indexes have been combined, this includes also the headers + * of each separate Stream and the possible Stream Padding fields. + */ +extern LZMA_API(lzma_vli) lzma_index_file_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Get the uncompressed size of the file + */ +extern LZMA_API(lzma_vli) lzma_index_uncompressed_size(const lzma_index *i) + lzma_nothrow lzma_attr_pure; + + +/** + * \brief Initialize an iterator + * + * \param iter Pointer to a lzma_index_iter structure + * \param i lzma_index to which the iterator will be associated + * + * This function associates the iterator with the given lzma_index, and calls + * lzma_index_iter_rewind() on the iterator. + * + * This function doesn't allocate any memory, thus there is no + * lzma_index_iter_end(). The iterator is valid as long as the + * associated lzma_index is valid, that is, until lzma_index_end() or + * using it as source in lzma_index_cat(). Specifically, lzma_index doesn't + * become invalid if new Blocks are added to it with lzma_index_append() or + * if it is used as the destination in lzma_index_cat(). + * + * It is safe to make copies of an initialized lzma_index_iter, for example, + * to easily restart reading at some particular position. + */ +extern LZMA_API(void) lzma_index_iter_init( + lzma_index_iter *iter, const lzma_index *i) lzma_nothrow; + + +/** + * \brief Rewind the iterator + * + * Rewind the iterator so that next call to lzma_index_iter_next() will + * return the first Block or Stream. + */ +extern LZMA_API(void) lzma_index_iter_rewind(lzma_index_iter *iter) + lzma_nothrow; + + +/** + * \brief Get the next Block or Stream + * + * \param iter Iterator initialized with lzma_index_iter_init() + * \param mode Specify what kind of information the caller wants + * to get. See lzma_index_iter_mode for details. + * + * \return If next Block or Stream matching the mode was found, *iter + * is updated and this function returns false. If no Block or + * Stream matching the mode is found, *iter is not modified + * and this function returns true. If mode is set to an unknown + * value, *iter is not modified and this function returns true. + */ +extern LZMA_API(lzma_bool) lzma_index_iter_next( + lzma_index_iter *iter, lzma_index_iter_mode mode) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Locate a Block + * + * If it is possible to seek in the .xz file, it is possible to parse + * the Index field(s) and use lzma_index_iter_locate() to do random-access + * reading with granularity of Block size. + * + * \param iter Iterator that was earlier initialized with + * lzma_index_iter_init(). + * \param target Uncompressed target offset which the caller would + * like to locate from the Stream + * + * If the target is smaller than the uncompressed size of the Stream (can be + * checked with lzma_index_uncompressed_size()): + * - Information about the Stream and Block containing the requested + * uncompressed offset is stored into *iter. + * - Internal state of the iterator is adjusted so that + * lzma_index_iter_next() can be used to read subsequent Blocks or Streams. + * - This function returns false. + * + * If target is greater than the uncompressed size of the Stream, *iter + * is not modified, and this function returns true. + */ +extern LZMA_API(lzma_bool) lzma_index_iter_locate( + lzma_index_iter *iter, lzma_vli target) lzma_nothrow; + + +/** + * \brief Concatenate lzma_indexes + * + * Concatenating lzma_indexes is useful when doing random-access reading in + * multi-Stream .xz file, or when combining multiple Streams into single + * Stream. + * + * \param dest lzma_index after which src is appended + * \param src lzma_index to be appended after dest. If this + * function succeeds, the memory allocated for src + * is freed or moved to be part of dest, and all + * iterators pointing to src will become invalid. + * \param allocator Custom memory allocator; can be NULL to use + * malloc() and free(). + * + * \return - LZMA_OK: lzma_indexes were concatenated successfully. + * src is now a dangling pointer. + * - LZMA_DATA_ERROR: *dest would grow too big. + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_cat(lzma_index *dest, lzma_index *src, + const lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Duplicate lzma_index + * + * \return A copy of the lzma_index, or NULL if memory allocation failed. + */ +extern LZMA_API(lzma_index *) lzma_index_dup( + const lzma_index *i, const lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .xz Index encoder + * + * \param strm Pointer to properly prepared lzma_stream + * \param i Pointer to lzma_index which should be encoded. + * + * The valid `action' values for lzma_code() are LZMA_RUN and LZMA_FINISH. + * It is enough to use only one of them (you can choose freely). + * + * \return - LZMA_OK: Initialization succeeded, continue with lzma_code(). + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_encoder( + lzma_stream *strm, const lzma_index *i) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Initialize .xz Index decoder + * + * \param strm Pointer to properly prepared lzma_stream + * \param i The decoded Index will be made available via + * this pointer. Initially this function will + * set *i to NULL (the old value is ignored). If + * decoding succeeds (lzma_code() returns + * LZMA_STREAM_END), *i will be set to point + * to a new lzma_index, which the application + * has to later free with lzma_index_end(). + * \param memlimit How much memory the resulting lzma_index is + * allowed to require. liblzma 5.2.3 and earlier + * don't allow 0 here and return LZMA_PROG_ERROR; + * later versions treat 0 as if 1 had been specified. + * + * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH. + * There is no need to use LZMA_FINISH, but it's allowed because it may + * simplify certain types of applications. + * + * \return - LZMA_OK: Initialization succeeded, continue with lzma_code(). + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + * + * liblzma 5.2.3 and older list also LZMA_MEMLIMIT_ERROR here + * but that error code has never been possible from this + * initialization function. + */ +extern LZMA_API(lzma_ret) lzma_index_decoder( + lzma_stream *strm, lzma_index **i, uint64_t memlimit) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Single-call .xz Index encoder + * + * \param i lzma_index to be encoded + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * *out_pos is updated only if encoding succeeds. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_BUF_ERROR: Output buffer is too small. Use + * lzma_index_size() to find out how much output + * space is needed. + * - LZMA_PROG_ERROR + * + * \note This function doesn't take allocator argument since all + * the internal data is allocated on stack. + */ +extern LZMA_API(lzma_ret) lzma_index_buffer_encode(const lzma_index *i, + uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Single-call .xz Index decoder + * + * \param i If decoding succeeds, *i will point to a new + * lzma_index, which the application has to + * later free with lzma_index_end(). If an error + * occurs, *i will be NULL. The old value of *i + * is always ignored and thus doesn't need to be + * initialized by the caller. + * \param memlimit Pointer to how much memory the resulting + * lzma_index is allowed to require. The value + * pointed by this pointer is modified if and only + * if LZMA_MEMLIMIT_ERROR is returned. + * \param allocator Pointer to lzma_allocator, or NULL to use malloc() + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * *in_pos is updated only if decoding succeeds. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_MEM_ERROR + * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. + * The minimum required memlimit value was stored to *memlimit. + * - LZMA_DATA_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_buffer_decode(lzma_index **i, + uint64_t *memlimit, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size) + lzma_nothrow; + + +/** + * \brief Initialize a .xz file information decoder + * + * \param strm Pointer to a properly prepared lzma_stream + * \param dest_index Pointer to a pointer where the decoder will put + * the decoded lzma_index. The old value + * of *dest_index is ignored (not freed). + * \param memlimit How much memory the resulting lzma_index is + * allowed to require. Use UINT64_MAX to + * effectively disable the limiter. + * \param file_size Size of the input .xz file + * + * This decoder decodes the Stream Header, Stream Footer, Index, and + * Stream Padding field(s) from the input .xz file and stores the resulting + * combined index in *dest_index. This information can be used to get the + * uncompressed file size with lzma_index_uncompressed_size(*dest_index) or, + * for example, to implement random access reading by locating the Blocks + * in the Streams. + * + * To get the required information from the .xz file, lzma_code() may ask + * the application to seek in the input file by returning LZMA_SEEK_NEEDED + * and having the target file position specified in lzma_stream.seek_pos. + * The number of seeks required depends on the input file and how big buffers + * the application provides. When possible, the decoder will seek backward + * and forward in the given buffer to avoid useless seek requests. Thus, if + * the application provides the whole file at once, no external seeking will + * be required (that is, lzma_code() won't return LZMA_SEEK_NEEDED). + * + * The value in lzma_stream.total_in can be used to estimate how much data + * liblzma had to read to get the file information. However, due to seeking + * and the way total_in is updated, the value of total_in will be somewhat + * inaccurate (a little too big). Thus, total_in is a good estimate but don't + * expect to see the same exact value for the same file if you change the + * input buffer size or switch to a different liblzma version. + * + * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH. + * You only need to use LZMA_RUN; LZMA_FINISH is only supported because it + * might be convenient for some applications. If you use LZMA_FINISH and if + * lzma_code() asks the application to seek, remember to reset `action' back + * to LZMA_RUN unless you hit the end of the file again. + * + * Possible return values from lzma_code(): + * - LZMA_OK: All OK so far, more input needed + * - LZMA_SEEK_NEEDED: Provide more input starting from the absolute + * file position strm->seek_pos + * - LZMA_STREAM_END: Decoding was successful, *dest_index has been set + * - LZMA_FORMAT_ERROR: The input file is not in the .xz format (the + * expected magic bytes were not found from the beginning of the file) + * - LZMA_OPTIONS_ERROR: File looks valid but contains headers that aren't + * supported by this version of liblzma + * - LZMA_DATA_ERROR: File is corrupt + * - LZMA_BUF_ERROR + * - LZMA_MEM_ERROR + * - LZMA_MEMLIMIT_ERROR + * - LZMA_PROG_ERROR + * + * \return - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_file_info_decoder( + lzma_stream *strm, lzma_index **dest_index, + uint64_t memlimit, uint64_t file_size) + lzma_nothrow; diff --git a/src/liblzma/api/lzma/index_hash.h b/src/liblzma/api/lzma/index_hash.h new file mode 100644 index 0000000..8ff4163 --- /dev/null +++ b/src/liblzma/api/lzma/index_hash.h @@ -0,0 +1,107 @@ +/** + * \file lzma/index_hash.h + * \brief Validate Index by using a hash function + * + * Hashing makes it possible to use constant amount of memory to validate + * Index of arbitrary size. + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + +/** + * \brief Opaque data type to hold the Index hash + */ +typedef struct lzma_index_hash_s lzma_index_hash; + + +/** + * \brief Allocate and initialize a new lzma_index_hash structure + * + * If index_hash is NULL, a new lzma_index_hash structure is allocated, + * initialized, and a pointer to it returned. If allocation fails, NULL + * is returned. + * + * If index_hash is non-NULL, it is reinitialized and the same pointer + * returned. In this case, return value cannot be NULL or a different + * pointer than the index_hash that was given as an argument. + */ +extern LZMA_API(lzma_index_hash *) lzma_index_hash_init( + lzma_index_hash *index_hash, const lzma_allocator *allocator) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Deallocate lzma_index_hash structure + */ +extern LZMA_API(void) lzma_index_hash_end( + lzma_index_hash *index_hash, const lzma_allocator *allocator) + lzma_nothrow; + + +/** + * \brief Add a new Record to an Index hash + * + * \param index_hash Pointer to a lzma_index_hash structure + * \param unpadded_size Unpadded Size of a Block + * \param uncompressed_size Uncompressed Size of a Block + * + * \return - LZMA_OK + * - LZMA_DATA_ERROR: Compressed or uncompressed size of the + * Stream or size of the Index field would grow too big. + * - LZMA_PROG_ERROR: Invalid arguments or this function is being + * used when lzma_index_hash_decode() has already been used. + */ +extern LZMA_API(lzma_ret) lzma_index_hash_append(lzma_index_hash *index_hash, + lzma_vli unpadded_size, lzma_vli uncompressed_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode and validate the Index field + * + * After telling the sizes of all Blocks with lzma_index_hash_append(), + * the actual Index field is decoded with this function. Specifically, + * once decoding of the Index field has been started, no more Records + * can be added using lzma_index_hash_append(). + * + * This function doesn't use lzma_stream structure to pass the input data. + * Instead, the input buffer is specified using three arguments. This is + * because it matches better the internal APIs of liblzma. + * + * \param index_hash Pointer to a lzma_index_hash structure + * \param in Pointer to the beginning of the input buffer + * \param in_pos in[*in_pos] is the next byte to process + * \param in_size in[in_size] is the first byte not to process + * + * \return - LZMA_OK: So far good, but more input is needed. + * - LZMA_STREAM_END: Index decoded successfully and it matches + * the Records given with lzma_index_hash_append(). + * - LZMA_DATA_ERROR: Index is corrupt or doesn't match the + * information given with lzma_index_hash_append(). + * - LZMA_BUF_ERROR: Cannot progress because *in_pos >= in_size. + * - LZMA_PROG_ERROR + */ +extern LZMA_API(lzma_ret) lzma_index_hash_decode(lzma_index_hash *index_hash, + const uint8_t *in, size_t *in_pos, size_t in_size) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Get the size of the Index field as bytes + * + * This is needed to verify the Backward Size field in the Stream Footer. + */ +extern LZMA_API(lzma_vli) lzma_index_hash_size( + const lzma_index_hash *index_hash) + lzma_nothrow lzma_attr_pure; diff --git a/src/liblzma/api/lzma/lzma12.h b/src/liblzma/api/lzma/lzma12.h new file mode 100644 index 0000000..d34e783 --- /dev/null +++ b/src/liblzma/api/lzma/lzma12.h @@ -0,0 +1,529 @@ +/** + * \file lzma/lzma12.h + * \brief LZMA1 and LZMA2 filters + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief LZMA1 Filter ID (for raw encoder/decoder only, not in .xz) + * + * LZMA1 is the very same thing as what was called just LZMA in LZMA Utils, + * 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent developers from + * accidentally using LZMA when they actually want LZMA2. + */ +#define LZMA_FILTER_LZMA1 LZMA_VLI_C(0x4000000000000001) + +/** + * \brief LZMA1 Filter ID with extended options (for raw encoder/decoder) + * + * This is like LZMA_FILTER_LZMA1 but with this ID a few extra options + * are supported in the lzma_options_lzma structure: + * + * - A flag to tell the encoder if the end of payload marker (EOPM) alias + * end of stream (EOS) marker must be written at the end of the stream. + * In contrast, LZMA_FILTER_LZMA1 always writes the end marker. + * + * - Decoder needs to be told the uncompressed size of the stream + * or that it is unknown (using the special value UINT64_MAX). + * If the size is known, a flag can be set to allow the presence of + * the end marker anyway. In contrast, LZMA_FILTER_LZMA1 always + * behaves as if the uncompressed size was unknown. + * + * This allows handling file formats where LZMA1 streams are used but where + * the end marker isn't allowed or where it might not (always) be present. + * This extended LZMA1 functionality is provided as a Filter ID for raw + * encoder and decoder instead of adding new encoder and decoder initialization + * functions because this way it is possible to also use extra filters, + * for example, LZMA_FILTER_X86 in a filter chain with LZMA_FILTER_LZMA1EXT, + * which might be needed to handle some file formats. + */ +#define LZMA_FILTER_LZMA1EXT LZMA_VLI_C(0x4000000000000002) + +/** + * \brief LZMA2 Filter ID + * + * Usually you want this instead of LZMA1. Compared to LZMA1, LZMA2 adds + * support for LZMA_SYNC_FLUSH, uncompressed chunks (smaller expansion + * when trying to compress uncompressible data), possibility to change + * lc/lp/pb in the middle of encoding, and some other internal improvements. + */ +#define LZMA_FILTER_LZMA2 LZMA_VLI_C(0x21) + + +/** + * \brief Match finders + * + * Match finder has major effect on both speed and compression ratio. + * Usually hash chains are faster than binary trees. + * + * If you will use LZMA_SYNC_FLUSH often, the hash chains may be a better + * choice, because binary trees get much higher compression ratio penalty + * with LZMA_SYNC_FLUSH. + * + * The memory usage formulas are only rough estimates, which are closest to + * reality when dict_size is a power of two. The formulas are more complex + * in reality, and can also change a little between liblzma versions. Use + * lzma_raw_encoder_memusage() to get more accurate estimate of memory usage. + */ +typedef enum { + LZMA_MF_HC3 = 0x03, + /**< + * \brief Hash Chain with 2- and 3-byte hashing + * + * Minimum nice_len: 3 + * + * Memory usage: + * - dict_size <= 16 MiB: dict_size * 7.5 + * - dict_size > 16 MiB: dict_size * 5.5 + 64 MiB + */ + + LZMA_MF_HC4 = 0x04, + /**< + * \brief Hash Chain with 2-, 3-, and 4-byte hashing + * + * Minimum nice_len: 4 + * + * Memory usage: + * - dict_size <= 32 MiB: dict_size * 7.5 + * - dict_size > 32 MiB: dict_size * 6.5 + */ + + LZMA_MF_BT2 = 0x12, + /**< + * \brief Binary Tree with 2-byte hashing + * + * Minimum nice_len: 2 + * + * Memory usage: dict_size * 9.5 + */ + + LZMA_MF_BT3 = 0x13, + /**< + * \brief Binary Tree with 2- and 3-byte hashing + * + * Minimum nice_len: 3 + * + * Memory usage: + * - dict_size <= 16 MiB: dict_size * 11.5 + * - dict_size > 16 MiB: dict_size * 9.5 + 64 MiB + */ + + LZMA_MF_BT4 = 0x14 + /**< + * \brief Binary Tree with 2-, 3-, and 4-byte hashing + * + * Minimum nice_len: 4 + * + * Memory usage: + * - dict_size <= 32 MiB: dict_size * 11.5 + * - dict_size > 32 MiB: dict_size * 10.5 + */ +} lzma_match_finder; + + +/** + * \brief Test if given match finder is supported + * + * Return true if the given match finder is supported by this liblzma build. + * Otherwise false is returned. It is safe to call this with a value that + * isn't listed in lzma_match_finder enumeration; the return value will be + * false. + * + * There is no way to list which match finders are available in this + * particular liblzma version and build. It would be useless, because + * a new match finder, which the application developer wasn't aware, + * could require giving additional options to the encoder that the older + * match finders don't need. + */ +extern LZMA_API(lzma_bool) lzma_mf_is_supported(lzma_match_finder match_finder) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Compression modes + * + * This selects the function used to analyze the data produced by the match + * finder. + */ +typedef enum { + LZMA_MODE_FAST = 1, + /**< + * \brief Fast compression + * + * Fast mode is usually at its best when combined with + * a hash chain match finder. + */ + + LZMA_MODE_NORMAL = 2 + /**< + * \brief Normal compression + * + * This is usually notably slower than fast mode. Use this + * together with binary tree match finders to expose the + * full potential of the LZMA1 or LZMA2 encoder. + */ +} lzma_mode; + + +/** + * \brief Test if given compression mode is supported + * + * Return true if the given compression mode is supported by this liblzma + * build. Otherwise false is returned. It is safe to call this with a value + * that isn't listed in lzma_mode enumeration; the return value will be false. + * + * There is no way to list which modes are available in this particular + * liblzma version and build. It would be useless, because a new compression + * mode, which the application developer wasn't aware, could require giving + * additional options to the encoder that the older modes don't need. + */ +extern LZMA_API(lzma_bool) lzma_mode_is_supported(lzma_mode mode) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Options specific to the LZMA1 and LZMA2 filters + * + * Since LZMA1 and LZMA2 share most of the code, it's simplest to share + * the options structure too. For encoding, all but the reserved variables + * need to be initialized unless specifically mentioned otherwise. + * lzma_lzma_preset() can be used to get a good starting point. + * + * For raw decoding, both LZMA1 and LZMA2 need dict_size, preset_dict, and + * preset_dict_size (if preset_dict != NULL). LZMA1 needs also lc, lp, and pb. + */ +typedef struct { + /** + * \brief Dictionary size in bytes + * + * Dictionary size indicates how many bytes of the recently processed + * uncompressed data is kept in memory. One method to reduce size of + * the uncompressed data is to store distance-length pairs, which + * indicate what data to repeat from the dictionary buffer. Thus, + * the bigger the dictionary, the better the compression ratio + * usually is. + * + * Maximum size of the dictionary depends on multiple things: + * - Memory usage limit + * - Available address space (not a problem on 64-bit systems) + * - Selected match finder (encoder only) + * + * Currently the maximum dictionary size for encoding is 1.5 GiB + * (i.e. (UINT32_C(1) << 30) + (UINT32_C(1) << 29)) even on 64-bit + * systems for certain match finder implementation reasons. In the + * future, there may be match finders that support bigger + * dictionaries. + * + * Decoder already supports dictionaries up to 4 GiB - 1 B (i.e. + * UINT32_MAX), so increasing the maximum dictionary size of the + * encoder won't cause problems for old decoders. + * + * Because extremely small dictionaries sizes would have unneeded + * overhead in the decoder, the minimum dictionary size is 4096 bytes. + * + * \note When decoding, too big dictionary does no other harm + * than wasting memory. + */ + uint32_t dict_size; +# define LZMA_DICT_SIZE_MIN UINT32_C(4096) +# define LZMA_DICT_SIZE_DEFAULT (UINT32_C(1) << 23) + + /** + * \brief Pointer to an initial dictionary + * + * It is possible to initialize the LZ77 history window using + * a preset dictionary. It is useful when compressing many + * similar, relatively small chunks of data independently from + * each other. The preset dictionary should contain typical + * strings that occur in the files being compressed. The most + * probable strings should be near the end of the preset dictionary. + * + * This feature should be used only in special situations. For + * now, it works correctly only with raw encoding and decoding. + * Currently none of the container formats supported by + * liblzma allow preset dictionary when decoding, thus if + * you create a .xz or .lzma file with preset dictionary, it + * cannot be decoded with the regular decoder functions. In the + * future, the .xz format will likely get support for preset + * dictionary though. + */ + const uint8_t *preset_dict; + + /** + * \brief Size of the preset dictionary + * + * Specifies the size of the preset dictionary. If the size is + * bigger than dict_size, only the last dict_size bytes are + * processed. + * + * This variable is read only when preset_dict is not NULL. + * If preset_dict is not NULL but preset_dict_size is zero, + * no preset dictionary is used (identical to only setting + * preset_dict to NULL). + */ + uint32_t preset_dict_size; + + /** + * \brief Number of literal context bits + * + * How many of the highest bits of the previous uncompressed + * eight-bit byte (also known as `literal') are taken into + * account when predicting the bits of the next literal. + * + * E.g. in typical English text, an upper-case letter is + * often followed by a lower-case letter, and a lower-case + * letter is usually followed by another lower-case letter. + * In the US-ASCII character set, the highest three bits are 010 + * for upper-case letters and 011 for lower-case letters. + * When lc is at least 3, the literal coding can take advantage of + * this property in the uncompressed data. + * + * There is a limit that applies to literal context bits and literal + * position bits together: lc + lp <= 4. Without this limit the + * decoding could become very slow, which could have security related + * results in some cases like email servers doing virus scanning. + * This limit also simplifies the internal implementation in liblzma. + * + * There may be LZMA1 streams that have lc + lp > 4 (maximum possible + * lc would be 8). It is not possible to decode such streams with + * liblzma. + */ + uint32_t lc; +# define LZMA_LCLP_MIN 0 +# define LZMA_LCLP_MAX 4 +# define LZMA_LC_DEFAULT 3 + + /** + * \brief Number of literal position bits + * + * lp affects what kind of alignment in the uncompressed data is + * assumed when encoding literals. A literal is a single 8-bit byte. + * See pb below for more information about alignment. + */ + uint32_t lp; +# define LZMA_LP_DEFAULT 0 + + /** + * \brief Number of position bits + * + * pb affects what kind of alignment in the uncompressed data is + * assumed in general. The default means four-byte alignment + * (2^ pb =2^2=4), which is often a good choice when there's + * no better guess. + * + * When the alignment is known, setting pb accordingly may reduce + * the file size a little. E.g. with text files having one-byte + * alignment (US-ASCII, ISO-8859-*, UTF-8), setting pb=0 can + * improve compression slightly. For UTF-16 text, pb=1 is a good + * choice. If the alignment is an odd number like 3 bytes, pb=0 + * might be the best choice. + * + * Even though the assumed alignment can be adjusted with pb and + * lp, LZMA1 and LZMA2 still slightly favor 16-byte alignment. + * It might be worth taking into account when designing file formats + * that are likely to be often compressed with LZMA1 or LZMA2. + */ + uint32_t pb; +# define LZMA_PB_MIN 0 +# define LZMA_PB_MAX 4 +# define LZMA_PB_DEFAULT 2 + + /** Compression mode */ + lzma_mode mode; + + /** + * \brief Nice length of a match + * + * This determines how many bytes the encoder compares from the match + * candidates when looking for the best match. Once a match of at + * least nice_len bytes long is found, the encoder stops looking for + * better candidates and encodes the match. (Naturally, if the found + * match is actually longer than nice_len, the actual length is + * encoded; it's not truncated to nice_len.) + * + * Bigger values usually increase the compression ratio and + * compression time. For most files, 32 to 128 is a good value, + * which gives very good compression ratio at good speed. + * + * The exact minimum value depends on the match finder. The maximum + * is 273, which is the maximum length of a match that LZMA1 and + * LZMA2 can encode. + */ + uint32_t nice_len; + + /** Match finder ID */ + lzma_match_finder mf; + + /** + * \brief Maximum search depth in the match finder + * + * For every input byte, match finder searches through the hash chain + * or binary tree in a loop, each iteration going one step deeper in + * the chain or tree. The searching stops if + * - a match of at least nice_len bytes long is found; + * - all match candidates from the hash chain or binary tree have + * been checked; or + * - maximum search depth is reached. + * + * Maximum search depth is needed to prevent the match finder from + * wasting too much time in case there are lots of short match + * candidates. On the other hand, stopping the search before all + * candidates have been checked can reduce compression ratio. + * + * Setting depth to zero tells liblzma to use an automatic default + * value, that depends on the selected match finder and nice_len. + * The default is in the range [4, 200] or so (it may vary between + * liblzma versions). + * + * Using a bigger depth value than the default can increase + * compression ratio in some cases. There is no strict maximum value, + * but high values (thousands or millions) should be used with care: + * the encoder could remain fast enough with typical input, but + * malicious input could cause the match finder to slow down + * dramatically, possibly creating a denial of service attack. + */ + uint32_t depth; + + /** + * \brief For LZMA_FILTER_LZMA1EXT: Extended flags + * + * This is used only with LZMA_FILTER_LZMA1EXT. + * + * Currently only one flag is supported, LZMA_LZMA1EXT_ALLOW_EOPM: + * + * - Encoder: If the flag is set, then end marker is written just + * like it is with LZMA_FILTER_LZMA1. Without this flag the + * end marker isn't written and the application has to store + * the uncompressed size somewhere outside the compressed stream. + * To decompress streams without the end marker, the appliation + * has to set the correct uncompressed size in ext_size_low and + * ext_size_high. + * + * - Decoder: If the uncompressed size in ext_size_low and + * ext_size_high is set to the special value UINT64_MAX + * (indicating unknown uncompressed size) then this flag is + * ignored and the end marker must always be present, that is, + * the behavior is identical to LZMA_FILTER_LZMA1. + * + * Otherwise, if this flag isn't set, then the input stream + * must not have the end marker; if the end marker is detected + * then it will result in LZMA_DATA_ERROR. This is useful when + * it is known that the stream must not have the end marker and + * strict validation is wanted. + * + * If this flag is set, then it is autodetected if the end marker + * is present after the specified number of uncompressed bytes + * has been decompressed (ext_size_low and ext_size_high). The + * end marker isn't allowed in any other position. This behavior + * is useful when uncompressed size is known but the end marker + * may or may not be present. This is the case, for example, + * in .7z files (valid .7z files that have the end marker in + * LZMA1 streams are rare but they do exist). + */ + uint32_t ext_flags; +# define LZMA_LZMA1EXT_ALLOW_EOPM UINT32_C(0x01) + + /** + * \brief For LZMA_FILTER_LZMA1EXT: Uncompressed size (low bits) + * + * The 64-bit uncompressed size is needed for decompression with + * LZMA_FILTER_LZMA1EXT. The size is ignored by the encoder. + * + * The special value UINT64_MAX indicates that the uncompressed size + * is unknown and that the end of payload marker (also known as + * end of stream marker) must be present to indicate the end of + * the LZMA1 stream. Any other value indicates the expected + * uncompressed size of the LZMA1 stream. (If LZMA1 was used together + * with filters that change the size of the data then the uncompressed + * size of the LZMA1 stream could be different than the final + * uncompressed size of the filtered stream.) + * + * ext_size_low holds the least significant 32 bits of the + * uncompressed size. The most significant 32 bits must be set + * in ext_size_high. The macro lzma_ext_size_set(opt_lzma, u64size) + * can be used to set these members. + * + * The 64-bit uncompressed size is split into two uint32_t variables + * because there were no reserved uint64_t members and using the + * same options structure for LZMA_FILTER_LZMA1, LZMA_FILTER_LZMA1EXT, + * and LZMA_FILTER_LZMA2 was otherwise more convenient than having + * a new options structure for LZMA_FILTER_LZMA1EXT. (Replacing two + * uint32_t members with one uint64_t changes the ABI on some systems + * as the alignment of this struct can increase from 4 bytes to 8.) + */ + uint32_t ext_size_low; + + /** + * \brief For LZMA_FILTER_LZMA1EXT: Uncompressed size (high bits) + * + * This holds the most significant 32 bits of the uncompressed size. + */ + uint32_t ext_size_high; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the names + * of these variables may change. These are and will never be used + * with the currently supported options, so it is safe to leave these + * uninitialized. + */ + uint32_t reserved_int4; + uint32_t reserved_int5; + uint32_t reserved_int6; + uint32_t reserved_int7; + uint32_t reserved_int8; + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + lzma_reserved_enum reserved_enum3; + lzma_reserved_enum reserved_enum4; + void *reserved_ptr1; + void *reserved_ptr2; + +} lzma_options_lzma; + + +/** + * \brief Macro to set the 64-bit uncompressed size in ext_size_* + * + * This might be convenient when decoding using LZMA_FILTER_LZMA1EXT. + * This isn't used with LZMA_FILTER_LZMA1 or LZMA_FILTER_LZMA2. + */ +#define lzma_set_ext_size(opt_lzma2, u64size) \ +do { \ + (opt_lzma2).ext_size_low = (uint32_t)(u64size); \ + (opt_lzma2).ext_size_high = (uint32_t)((uint64_t)(u64size) >> 32); \ +} while (0) + + +/** + * \brief Set a compression preset to lzma_options_lzma structure + * + * 0 is the fastest and 9 is the slowest. These match the switches -0 .. -9 + * of the xz command line tool. In addition, it is possible to bitwise-or + * flags to the preset. Currently only LZMA_PRESET_EXTREME is supported. + * The flags are defined in container.h, because the flags are used also + * with lzma_easy_encoder(). + * + * The preset values are subject to changes between liblzma versions. + * + * This function is available only if LZMA1 or LZMA2 encoder has been enabled + * when building liblzma. + * + * \return On success, false is returned. If the preset is not + * supported, true is returned. + */ +extern LZMA_API(lzma_bool) lzma_lzma_preset( + lzma_options_lzma *options, uint32_t preset) lzma_nothrow; diff --git a/src/liblzma/api/lzma/stream_flags.h b/src/liblzma/api/lzma/stream_flags.h new file mode 100644 index 0000000..bbdd408 --- /dev/null +++ b/src/liblzma/api/lzma/stream_flags.h @@ -0,0 +1,223 @@ +/** + * \file lzma/stream_flags.h + * \brief .xz Stream Header and Stream Footer encoder and decoder + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Size of Stream Header and Stream Footer + * + * Stream Header and Stream Footer have the same size and they are not + * going to change even if a newer version of the .xz file format is + * developed in future. + */ +#define LZMA_STREAM_HEADER_SIZE 12 + + +/** + * \brief Options for encoding/decoding Stream Header and Stream Footer + */ +typedef struct { + /** + * \brief Stream Flags format version + * + * To prevent API and ABI breakages if new features are needed in + * Stream Header or Stream Footer, a version number is used to + * indicate which fields in this structure are in use. For now, + * version must always be zero. With non-zero version, the + * lzma_stream_header_encode() and lzma_stream_footer_encode() + * will return LZMA_OPTIONS_ERROR. + * + * lzma_stream_header_decode() and lzma_stream_footer_decode() + * will always set this to the lowest value that supports all the + * features indicated by the Stream Flags field. The application + * must check that the version number set by the decoding functions + * is supported by the application. Otherwise it is possible that + * the application will decode the Stream incorrectly. + */ + uint32_t version; + + /** + * \brief Backward Size + * + * Backward Size must be a multiple of four bytes. In this Stream + * format version, Backward Size is the size of the Index field. + * + * Backward Size isn't actually part of the Stream Flags field, but + * it is convenient to include in this structure anyway. Backward + * Size is present only in the Stream Footer. There is no need to + * initialize backward_size when encoding Stream Header. + * + * lzma_stream_header_decode() always sets backward_size to + * LZMA_VLI_UNKNOWN so that it is convenient to use + * lzma_stream_flags_compare() when both Stream Header and Stream + * Footer have been decoded. + */ + lzma_vli backward_size; +# define LZMA_BACKWARD_SIZE_MIN 4 +# define LZMA_BACKWARD_SIZE_MAX (LZMA_VLI_C(1) << 34) + + /** + * \brief Check ID + * + * This indicates the type of the integrity check calculated from + * uncompressed data. + */ + lzma_check check; + + /* + * Reserved space to allow possible future extensions without + * breaking the ABI. You should not touch these, because the + * names of these variables may change. + * + * (We will never be able to use all of these since Stream Flags + * is just two bytes plus Backward Size of four bytes. But it's + * nice to have the proper types when they are needed.) + */ + lzma_reserved_enum reserved_enum1; + lzma_reserved_enum reserved_enum2; + lzma_reserved_enum reserved_enum3; + lzma_reserved_enum reserved_enum4; + lzma_bool reserved_bool1; + lzma_bool reserved_bool2; + lzma_bool reserved_bool3; + lzma_bool reserved_bool4; + lzma_bool reserved_bool5; + lzma_bool reserved_bool6; + lzma_bool reserved_bool7; + lzma_bool reserved_bool8; + uint32_t reserved_int1; + uint32_t reserved_int2; + +} lzma_stream_flags; + + +/** + * \brief Encode Stream Header + * + * \param options Stream Header options to be encoded. + * options->backward_size is ignored and doesn't + * need to be initialized. + * \param out Beginning of the output buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_OPTIONS_ERROR: options->version is not supported by + * this liblzma version. + * - LZMA_PROG_ERROR: Invalid options. + */ +extern LZMA_API(lzma_ret) lzma_stream_header_encode( + const lzma_stream_flags *options, uint8_t *out) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Encode Stream Footer + * + * \param options Stream Footer options to be encoded. + * \param out Beginning of the output buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * \return - LZMA_OK: Encoding was successful. + * - LZMA_OPTIONS_ERROR: options->version is not supported by + * this liblzma version. + * - LZMA_PROG_ERROR: Invalid options. + */ +extern LZMA_API(lzma_ret) lzma_stream_footer_encode( + const lzma_stream_flags *options, uint8_t *out) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Stream Header + * + * \param options Target for the decoded Stream Header options. + * \param in Beginning of the input buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * options->backward_size is always set to LZMA_VLI_UNKNOWN. This is to + * help comparing Stream Flags from Stream Header and Stream Footer with + * lzma_stream_flags_compare(). + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given + * buffer cannot be Stream Header. + * - LZMA_DATA_ERROR: CRC32 doesn't match, thus the header + * is corrupt. + * - LZMA_OPTIONS_ERROR: Unsupported options are present + * in the header. + * + * \note When decoding .xz files that contain multiple Streams, it may + * make sense to print "file format not recognized" only if + * decoding of the Stream Header of the _first_ Stream gives + * LZMA_FORMAT_ERROR. If non-first Stream Header gives + * LZMA_FORMAT_ERROR, the message used for LZMA_DATA_ERROR is + * probably more appropriate. + * + * For example, Stream decoder in liblzma uses LZMA_DATA_ERROR if + * LZMA_FORMAT_ERROR is returned by lzma_stream_header_decode() + * when decoding non-first Stream. + */ +extern LZMA_API(lzma_ret) lzma_stream_header_decode( + lzma_stream_flags *options, const uint8_t *in) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Decode Stream Footer + * + * \param options Target for the decoded Stream Header options. + * \param in Beginning of the input buffer of + * LZMA_STREAM_HEADER_SIZE bytes. + * + * \return - LZMA_OK: Decoding was successful. + * - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given + * buffer cannot be Stream Footer. + * - LZMA_DATA_ERROR: CRC32 doesn't match, thus the Stream Footer + * is corrupt. + * - LZMA_OPTIONS_ERROR: Unsupported options are present + * in Stream Footer. + * + * \note If Stream Header was already decoded successfully, but + * decoding Stream Footer returns LZMA_FORMAT_ERROR, the + * application should probably report some other error message + * than "file format not recognized", since the file more likely + * is corrupt (possibly truncated). Stream decoder in liblzma + * uses LZMA_DATA_ERROR in this situation. + */ +extern LZMA_API(lzma_ret) lzma_stream_footer_decode( + lzma_stream_flags *options, const uint8_t *in) + lzma_nothrow lzma_attr_warn_unused_result; + + +/** + * \brief Compare two lzma_stream_flags structures + * + * backward_size values are compared only if both are not + * LZMA_VLI_UNKNOWN. + * + * \return - LZMA_OK: Both are equal. If either had backward_size set + * to LZMA_VLI_UNKNOWN, backward_size values were not + * compared or validated. + * - LZMA_DATA_ERROR: The structures differ. + * - LZMA_OPTIONS_ERROR: version in either structure is greater + * than the maximum supported version (currently zero). + * - LZMA_PROG_ERROR: Invalid value, e.g. invalid check or + * backward_size. + */ +extern LZMA_API(lzma_ret) lzma_stream_flags_compare( + const lzma_stream_flags *a, const lzma_stream_flags *b) + lzma_nothrow lzma_attr_pure; diff --git a/src/liblzma/api/lzma/version.h b/src/liblzma/api/lzma/version.h new file mode 100644 index 0000000..0dd90fc --- /dev/null +++ b/src/liblzma/api/lzma/version.h @@ -0,0 +1,121 @@ +/** + * \file lzma/version.h + * \brief Version number + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/* + * Version number split into components + */ +#define LZMA_VERSION_MAJOR 5 +#define LZMA_VERSION_MINOR 4 +#define LZMA_VERSION_PATCH 1 +#define LZMA_VERSION_STABILITY LZMA_VERSION_STABILITY_STABLE + +#ifndef LZMA_VERSION_COMMIT +# define LZMA_VERSION_COMMIT "" +#endif + + +/* + * Map symbolic stability levels to integers. + */ +#define LZMA_VERSION_STABILITY_ALPHA 0 +#define LZMA_VERSION_STABILITY_BETA 1 +#define LZMA_VERSION_STABILITY_STABLE 2 + + +/** + * \brief Compile-time version number + * + * The version number is of format xyyyzzzs where + * - x = major + * - yyy = minor + * - zzz = revision + * - s indicates stability: 0 = alpha, 1 = beta, 2 = stable + * + * The same xyyyzzz triplet is never reused with different stability levels. + * For example, if 5.1.0alpha has been released, there will never be 5.1.0beta + * or 5.1.0 stable. + * + * \note The version number of liblzma has nothing to with + * the version number of Igor Pavlov's LZMA SDK. + */ +#define LZMA_VERSION (LZMA_VERSION_MAJOR * UINT32_C(10000000) \ + + LZMA_VERSION_MINOR * UINT32_C(10000) \ + + LZMA_VERSION_PATCH * UINT32_C(10) \ + + LZMA_VERSION_STABILITY) + + +/* + * Macros to construct the compile-time version string + */ +#if LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_ALPHA +# define LZMA_VERSION_STABILITY_STRING "alpha" +#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_BETA +# define LZMA_VERSION_STABILITY_STRING "beta" +#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_STABLE +# define LZMA_VERSION_STABILITY_STRING "" +#else +# error Incorrect LZMA_VERSION_STABILITY +#endif + +#define LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit) \ + #major "." #minor "." #patch stability commit + +#define LZMA_VERSION_STRING_C(major, minor, patch, stability, commit) \ + LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit) + + +/** + * \brief Compile-time version as a string + * + * This can be for example "4.999.5alpha", "4.999.8beta", or "5.0.0" (stable + * versions don't have any "stable" suffix). In future, a snapshot built + * from source code repository may include an additional suffix, for example + * "4.999.8beta-21-g1d92". The commit ID won't be available in numeric form + * in LZMA_VERSION macro. + */ +#define LZMA_VERSION_STRING LZMA_VERSION_STRING_C( \ + LZMA_VERSION_MAJOR, LZMA_VERSION_MINOR, \ + LZMA_VERSION_PATCH, LZMA_VERSION_STABILITY_STRING, \ + LZMA_VERSION_COMMIT) + + +/* #ifndef is needed for use with windres (MinGW or Cygwin). */ +#ifndef LZMA_H_INTERNAL_RC + +/** + * \brief Run-time version number as an integer + * + * Return the value of LZMA_VERSION macro at the compile time of liblzma. + * This allows the application to compare if it was built against the same, + * older, or newer version of liblzma that is currently running. + */ +extern LZMA_API(uint32_t) lzma_version_number(void) + lzma_nothrow lzma_attr_const; + + +/** + * \brief Run-time version as a string + * + * This function may be useful if you want to display which version of + * liblzma your application is currently using. + */ +extern LZMA_API(const char *) lzma_version_string(void) + lzma_nothrow lzma_attr_const; + +#endif diff --git a/src/liblzma/api/lzma/vli.h b/src/liblzma/api/lzma/vli.h new file mode 100644 index 0000000..7a0a803 --- /dev/null +++ b/src/liblzma/api/lzma/vli.h @@ -0,0 +1,168 @@ +/** + * \file lzma/vli.h + * \brief Variable-length integer handling + * + * In the .xz format, most integers are encoded in a variable-length + * representation, which is sometimes called little endian base-128 encoding. + * This saves space when smaller values are more likely than bigger values. + * + * The encoding scheme encodes seven bits to every byte, using minimum + * number of bytes required to represent the given value. Encodings that use + * non-minimum number of bytes are invalid, thus every integer has exactly + * one encoded representation. The maximum number of bits in a VLI is 63, + * thus the vli argument must be less than or equal to UINT64_MAX / 2. You + * should use LZMA_VLI_MAX for clarity. + */ + +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * See ../lzma.h for information about liblzma as a whole. + */ + +#ifndef LZMA_H_INTERNAL +# error Never include this file directly. Use instead. +#endif + + +/** + * \brief Maximum supported value of a variable-length integer + */ +#define LZMA_VLI_MAX (UINT64_MAX / 2) + +/** + * \brief VLI value to denote that the value is unknown + */ +#define LZMA_VLI_UNKNOWN UINT64_MAX + +/** + * \brief Maximum supported encoded length of variable length integers + */ +#define LZMA_VLI_BYTES_MAX 9 + +/** + * \brief VLI constant suffix + */ +#define LZMA_VLI_C(n) UINT64_C(n) + + +/** + * \brief Variable-length integer type + * + * Valid VLI values are in the range [0, LZMA_VLI_MAX]. Unknown value is + * indicated with LZMA_VLI_UNKNOWN, which is the maximum value of the + * underlying integer type. + * + * lzma_vli will be uint64_t for the foreseeable future. If a bigger size + * is needed in the future, it is guaranteed that 2 * LZMA_VLI_MAX will + * not overflow lzma_vli. This simplifies integer overflow detection. + */ +typedef uint64_t lzma_vli; + + +/** + * \brief Validate a variable-length integer + * + * This is useful to test that application has given acceptable values + * for example in the uncompressed_size and compressed_size variables. + * + * \return True if the integer is representable as VLI or if it + * indicates unknown value. + */ +#define lzma_vli_is_valid(vli) \ + ((vli) <= LZMA_VLI_MAX || (vli) == LZMA_VLI_UNKNOWN) + + +/** + * \brief Encode a variable-length integer + * + * This function has two modes: single-call and multi-call. Single-call mode + * encodes the whole integer at once; it is an error if the output buffer is + * too small. Multi-call mode saves the position in *vli_pos, and thus it is + * possible to continue encoding if the buffer becomes full before the whole + * integer has been encoded. + * + * \param vli Integer to be encoded + * \param vli_pos How many VLI-encoded bytes have already been written + * out. When starting to encode a new integer in + * multi-call mode, *vli_pos must be set to zero. + * To use single-call encoding, set vli_pos to NULL. + * \param out Beginning of the output buffer + * \param out_pos The next byte will be written to out[*out_pos]. + * \param out_size Size of the out buffer; the first byte into + * which no data is written to is out[out_size]. + * + * \return Slightly different return values are used in multi-call and + * single-call modes. + * + * Single-call (vli_pos == NULL): + * - LZMA_OK: Integer successfully encoded. + * - LZMA_PROG_ERROR: Arguments are not sane. This can be due + * to too little output space; single-call mode doesn't use + * LZMA_BUF_ERROR, since the application should have checked + * the encoded size with lzma_vli_size(). + * + * Multi-call (vli_pos != NULL): + * - LZMA_OK: So far all OK, but the integer is not + * completely written out yet. + * - LZMA_STREAM_END: Integer successfully encoded. + * - LZMA_BUF_ERROR: No output space was provided. + * - LZMA_PROG_ERROR: Arguments are not sane. + */ +extern LZMA_API(lzma_ret) lzma_vli_encode(lzma_vli vli, size_t *vli_pos, + uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; + + +/** + * \brief Decode a variable-length integer + * + * Like lzma_vli_encode(), this function has single-call and multi-call modes. + * + * \param vli Pointer to decoded integer. The decoder will + * initialize it to zero when *vli_pos == 0, so + * application isn't required to initialize *vli. + * \param vli_pos How many bytes have already been decoded. When + * starting to decode a new integer in multi-call + * mode, *vli_pos must be initialized to zero. To + * use single-call decoding, set vli_pos to NULL. + * \param in Beginning of the input buffer + * \param in_pos The next byte will be read from in[*in_pos]. + * \param in_size Size of the input buffer; the first byte that + * won't be read is in[in_size]. + * + * \return Slightly different return values are used in multi-call and + * single-call modes. + * + * Single-call (vli_pos == NULL): + * - LZMA_OK: Integer successfully decoded. + * - LZMA_DATA_ERROR: Integer is corrupt. This includes hitting + * the end of the input buffer before the whole integer was + * decoded; providing no input at all will use LZMA_DATA_ERROR. + * - LZMA_PROG_ERROR: Arguments are not sane. + * + * Multi-call (vli_pos != NULL): + * - LZMA_OK: So far all OK, but the integer is not + * completely decoded yet. + * - LZMA_STREAM_END: Integer successfully decoded. + * - LZMA_DATA_ERROR: Integer is corrupt. + * - LZMA_BUF_ERROR: No input was provided. + * - LZMA_PROG_ERROR: Arguments are not sane. + */ +extern LZMA_API(lzma_ret) lzma_vli_decode(lzma_vli *vli, size_t *vli_pos, + const uint8_t *in, size_t *in_pos, size_t in_size) + lzma_nothrow; + + +/** + * \brief Get the number of bytes required to encode a VLI + * + * \param vli Integer whose encoded size is to be determined + * + * \return Number of bytes on success (1-9). If vli isn't valid, + * zero is returned. + */ +extern LZMA_API(uint32_t) lzma_vli_size(lzma_vli vli) + lzma_nothrow lzma_attr_pure; diff --git a/src/liblzma/check/Makefile.inc b/src/liblzma/check/Makefile.inc new file mode 100644 index 0000000..dc011a3 --- /dev/null +++ b/src/liblzma/check/Makefile.inc @@ -0,0 +1,53 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +EXTRA_DIST += \ + check/crc32_tablegen.c \ + check/crc64_tablegen.c + +liblzma_la_SOURCES += \ + check/check.c \ + check/check.h \ + check/crc_macros.h + +if COND_CHECK_CRC32 +if COND_SMALL +liblzma_la_SOURCES += check/crc32_small.c +else +liblzma_la_SOURCES += \ + check/crc32_table.c \ + check/crc32_table_le.h \ + check/crc32_table_be.h +if COND_ASM_X86 +liblzma_la_SOURCES += check/crc32_x86.S +else +liblzma_la_SOURCES += check/crc32_fast.c +endif +endif +endif + +if COND_CHECK_CRC64 +if COND_SMALL +liblzma_la_SOURCES += check/crc64_small.c +else +liblzma_la_SOURCES += \ + check/crc64_table.c \ + check/crc64_table_le.h \ + check/crc64_table_be.h +if COND_ASM_X86 +liblzma_la_SOURCES += check/crc64_x86.S +else +liblzma_la_SOURCES += check/crc64_fast.c +endif +endif +endif + +if COND_CHECK_SHA256 +if COND_INTERNAL_SHA256 +liblzma_la_SOURCES += check/sha256.c +endif +endif diff --git a/src/liblzma/check/check.c b/src/liblzma/check/check.c new file mode 100644 index 0000000..428ddae --- /dev/null +++ b/src/liblzma/check/check.c @@ -0,0 +1,174 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file check.c +/// \brief Single API to access different integrity checks +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "check.h" + + +extern LZMA_API(lzma_bool) +lzma_check_is_supported(lzma_check type) +{ + if ((unsigned int)(type) > LZMA_CHECK_ID_MAX) + return false; + + static const lzma_bool available_checks[LZMA_CHECK_ID_MAX + 1] = { + true, // LZMA_CHECK_NONE + +#ifdef HAVE_CHECK_CRC32 + true, +#else + false, +#endif + + false, // Reserved + false, // Reserved + +#ifdef HAVE_CHECK_CRC64 + true, +#else + false, +#endif + + false, // Reserved + false, // Reserved + false, // Reserved + false, // Reserved + false, // Reserved + +#ifdef HAVE_CHECK_SHA256 + true, +#else + false, +#endif + + false, // Reserved + false, // Reserved + false, // Reserved + false, // Reserved + false, // Reserved + }; + + return available_checks[(unsigned int)(type)]; +} + + +extern LZMA_API(uint32_t) +lzma_check_size(lzma_check type) +{ + if ((unsigned int)(type) > LZMA_CHECK_ID_MAX) + return UINT32_MAX; + + // See file-format.txt section 2.1.1.2. + static const uint8_t check_sizes[LZMA_CHECK_ID_MAX + 1] = { + 0, + 4, 4, 4, + 8, 8, 8, + 16, 16, 16, + 32, 32, 32, + 64, 64, 64 + }; + + return check_sizes[(unsigned int)(type)]; +} + + +extern void +lzma_check_init(lzma_check_state *check, lzma_check type) +{ + switch (type) { + case LZMA_CHECK_NONE: + break; + +#ifdef HAVE_CHECK_CRC32 + case LZMA_CHECK_CRC32: + check->state.crc32 = 0; + break; +#endif + +#ifdef HAVE_CHECK_CRC64 + case LZMA_CHECK_CRC64: + check->state.crc64 = 0; + break; +#endif + +#ifdef HAVE_CHECK_SHA256 + case LZMA_CHECK_SHA256: + lzma_sha256_init(check); + break; +#endif + + default: + break; + } + + return; +} + + +extern void +lzma_check_update(lzma_check_state *check, lzma_check type, + const uint8_t *buf, size_t size) +{ + switch (type) { +#ifdef HAVE_CHECK_CRC32 + case LZMA_CHECK_CRC32: + check->state.crc32 = lzma_crc32(buf, size, check->state.crc32); + break; +#endif + +#ifdef HAVE_CHECK_CRC64 + case LZMA_CHECK_CRC64: + check->state.crc64 = lzma_crc64(buf, size, check->state.crc64); + break; +#endif + +#ifdef HAVE_CHECK_SHA256 + case LZMA_CHECK_SHA256: + lzma_sha256_update(buf, size, check); + break; +#endif + + default: + break; + } + + return; +} + + +extern void +lzma_check_finish(lzma_check_state *check, lzma_check type) +{ + switch (type) { +#ifdef HAVE_CHECK_CRC32 + case LZMA_CHECK_CRC32: + check->buffer.u32[0] = conv32le(check->state.crc32); + break; +#endif + +#ifdef HAVE_CHECK_CRC64 + case LZMA_CHECK_CRC64: + check->buffer.u64[0] = conv64le(check->state.crc64); + break; +#endif + +#ifdef HAVE_CHECK_SHA256 + case LZMA_CHECK_SHA256: + lzma_sha256_finish(check); + break; +#endif + + default: + break; + } + + return; +} diff --git a/src/liblzma/check/check.h b/src/liblzma/check/check.h new file mode 100644 index 0000000..3007d88 --- /dev/null +++ b/src/liblzma/check/check.h @@ -0,0 +1,172 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file check.h +/// \brief Internal API to different integrity check functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_CHECK_H +#define LZMA_CHECK_H + +#include "common.h" + +// If the function for external SHA-256 is missing, use the internal SHA-256 +// code. Due to how configure works, these defines can only get defined when +// both a usable header and a type have already been found. +#if !(defined(HAVE_CC_SHA256_INIT) \ + || defined(HAVE_SHA256_INIT) \ + || defined(HAVE_SHA256INIT)) +# define HAVE_INTERNAL_SHA256 1 +#endif + +#if defined(HAVE_INTERNAL_SHA256) +// Nothing +#elif defined(HAVE_COMMONCRYPTO_COMMONDIGEST_H) +# include +#elif defined(HAVE_SHA256_H) +# include +# include +#elif defined(HAVE_SHA2_H) +# include +# include +#endif + +#if defined(HAVE_INTERNAL_SHA256) +/// State for the internal SHA-256 implementation +typedef struct { + /// Internal state + uint32_t state[8]; + + /// Size of the message excluding padding + uint64_t size; +} lzma_sha256_state; +#elif defined(HAVE_CC_SHA256_CTX) +typedef CC_SHA256_CTX lzma_sha256_state; +#elif defined(HAVE_SHA256_CTX) +typedef SHA256_CTX lzma_sha256_state; +#elif defined(HAVE_SHA2_CTX) +typedef SHA2_CTX lzma_sha256_state; +#endif + +#if defined(HAVE_INTERNAL_SHA256) +// Nothing +#elif defined(HAVE_CC_SHA256_INIT) +# define LZMA_SHA256FUNC(x) CC_SHA256_ ## x +#elif defined(HAVE_SHA256_INIT) +# define LZMA_SHA256FUNC(x) SHA256_ ## x +#elif defined(HAVE_SHA256INIT) +# define LZMA_SHA256FUNC(x) SHA256 ## x +#endif + +// Index hashing needs the best possible hash function (preferably +// a cryptographic hash) for maximum reliability. +#if defined(HAVE_CHECK_SHA256) +# define LZMA_CHECK_BEST LZMA_CHECK_SHA256 +#elif defined(HAVE_CHECK_CRC64) +# define LZMA_CHECK_BEST LZMA_CHECK_CRC64 +#else +# define LZMA_CHECK_BEST LZMA_CHECK_CRC32 +#endif + + +/// \brief Structure to hold internal state of the check being calculated +/// +/// \note This is not in the public API because this structure may +/// change in future if new integrity check algorithms are added. +typedef struct { + /// Buffer to hold the final result and a temporary buffer for SHA256. + union { + uint8_t u8[64]; + uint32_t u32[16]; + uint64_t u64[8]; + } buffer; + + /// Check-specific data + union { + uint32_t crc32; + uint64_t crc64; + lzma_sha256_state sha256; + } state; + +} lzma_check_state; + + +/// lzma_crc32_table[0] is needed by LZ encoder so we need to keep +/// the array two-dimensional. +#ifdef HAVE_SMALL +extern uint32_t lzma_crc32_table[1][256]; +extern void lzma_crc32_init(void); +#else +extern const uint32_t lzma_crc32_table[8][256]; +extern const uint64_t lzma_crc64_table[4][256]; +#endif + + +/// \brief Initialize *check depending on type +/// +/// \return LZMA_OK on success. LZMA_UNSUPPORTED_CHECK if the type is not +/// supported by the current version or build of liblzma. +/// LZMA_PROG_ERROR if type > LZMA_CHECK_ID_MAX. +extern void lzma_check_init(lzma_check_state *check, lzma_check type); + +/// Update the check state +extern void lzma_check_update(lzma_check_state *check, lzma_check type, + const uint8_t *buf, size_t size); + +/// Finish the check calculation and store the result to check->buffer.u8. +extern void lzma_check_finish(lzma_check_state *check, lzma_check type); + + +#ifndef LZMA_SHA256FUNC + +/// Prepare SHA-256 state for new input. +extern void lzma_sha256_init(lzma_check_state *check); + +/// Update the SHA-256 hash state +extern void lzma_sha256_update( + const uint8_t *buf, size_t size, lzma_check_state *check); + +/// Finish the SHA-256 calculation and store the result to check->buffer.u8. +extern void lzma_sha256_finish(lzma_check_state *check); + + +#else + +static inline void +lzma_sha256_init(lzma_check_state *check) +{ + LZMA_SHA256FUNC(Init)(&check->state.sha256); +} + + +static inline void +lzma_sha256_update(const uint8_t *buf, size_t size, lzma_check_state *check) +{ +#if defined(HAVE_CC_SHA256_INIT) && SIZE_MAX > UINT32_MAX + // Darwin's CC_SHA256_Update takes uint32_t as the buffer size, + // so use a loop to support size_t. + while (size > UINT32_MAX) { + LZMA_SHA256FUNC(Update)(&check->state.sha256, buf, UINT32_MAX); + buf += UINT32_MAX; + size -= UINT32_MAX; + } +#endif + + LZMA_SHA256FUNC(Update)(&check->state.sha256, buf, size); +} + + +static inline void +lzma_sha256_finish(lzma_check_state *check) +{ + LZMA_SHA256FUNC(Final)(check->buffer.u8, &check->state.sha256); +} + +#endif + +#endif diff --git a/src/liblzma/check/crc32_fast.c b/src/liblzma/check/crc32_fast.c new file mode 100644 index 0000000..eed7350 --- /dev/null +++ b/src/liblzma/check/crc32_fast.c @@ -0,0 +1,82 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc32.c +/// \brief CRC32 calculation +/// +/// Calculate the CRC32 using the slice-by-eight algorithm. +/// It is explained in this document: +/// http://www.intel.com/technology/comms/perfnet/download/CRC_generators.pdf +/// The code in this file is not the same as in Intel's paper, but +/// the basic principle is identical. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "check.h" +#include "crc_macros.h" + + +// If you make any changes, do some benchmarking! Seemingly unrelated +// changes can very easily ruin the performance (and very probably is +// very compiler dependent). +extern LZMA_API(uint32_t) +lzma_crc32(const uint8_t *buf, size_t size, uint32_t crc) +{ + crc = ~crc; + +#ifdef WORDS_BIGENDIAN + crc = bswap32(crc); +#endif + + if (size > 8) { + // Fix the alignment, if needed. The if statement above + // ensures that this won't read past the end of buf[]. + while ((uintptr_t)(buf) & 7) { + crc = lzma_crc32_table[0][*buf++ ^ A(crc)] ^ S8(crc); + --size; + } + + // Calculate the position where to stop. + const uint8_t *const limit = buf + (size & ~(size_t)(7)); + + // Calculate how many bytes must be calculated separately + // before returning the result. + size &= (size_t)(7); + + // Calculate the CRC32 using the slice-by-eight algorithm. + while (buf < limit) { + crc ^= aligned_read32ne(buf); + buf += 4; + + crc = lzma_crc32_table[7][A(crc)] + ^ lzma_crc32_table[6][B(crc)] + ^ lzma_crc32_table[5][C(crc)] + ^ lzma_crc32_table[4][D(crc)]; + + const uint32_t tmp = aligned_read32ne(buf); + buf += 4; + + // At least with some compilers, it is critical for + // performance, that the crc variable is XORed + // between the two table-lookup pairs. + crc = lzma_crc32_table[3][A(tmp)] + ^ lzma_crc32_table[2][B(tmp)] + ^ crc + ^ lzma_crc32_table[1][C(tmp)] + ^ lzma_crc32_table[0][D(tmp)]; + } + } + + while (size-- != 0) + crc = lzma_crc32_table[0][*buf++ ^ A(crc)] ^ S8(crc); + +#ifdef WORDS_BIGENDIAN + crc = bswap32(crc); +#endif + + return ~crc; +} diff --git a/src/liblzma/check/crc32_small.c b/src/liblzma/check/crc32_small.c new file mode 100644 index 0000000..186966e --- /dev/null +++ b/src/liblzma/check/crc32_small.c @@ -0,0 +1,68 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc32_small.c +/// \brief CRC32 calculation (size-optimized) +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "check.h" + + +uint32_t lzma_crc32_table[1][256]; + + +#ifdef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR +__attribute__((__constructor__)) +#endif +static void +crc32_init(void) +{ + static const uint32_t poly32 = UINT32_C(0xEDB88320); + + for (size_t b = 0; b < 256; ++b) { + uint32_t r = b; + for (size_t i = 0; i < 8; ++i) { + if (r & 1) + r = (r >> 1) ^ poly32; + else + r >>= 1; + } + + lzma_crc32_table[0][b] = r; + } + + return; +} + + +#ifndef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR +extern void +lzma_crc32_init(void) +{ + mythread_once(crc32_init); + return; +} +#endif + + +extern LZMA_API(uint32_t) +lzma_crc32(const uint8_t *buf, size_t size, uint32_t crc) +{ +#ifndef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR + lzma_crc32_init(); +#endif + + crc = ~crc; + + while (size != 0) { + crc = lzma_crc32_table[0][*buf++ ^ (crc & 0xFF)] ^ (crc >> 8); + --size; + } + + return ~crc; +} diff --git a/src/liblzma/check/crc32_table.c b/src/liblzma/check/crc32_table.c new file mode 100644 index 0000000..b11762a --- /dev/null +++ b/src/liblzma/check/crc32_table.c @@ -0,0 +1,22 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc32_table.c +/// \brief Precalculated CRC32 table with correct endianness +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + +// Having the declaration here silences clang -Wmissing-variable-declarations. +extern const uint32_t lzma_crc32_table[8][256]; + +#ifdef WORDS_BIGENDIAN +# include "crc32_table_be.h" +#else +# include "crc32_table_le.h" +#endif diff --git a/src/liblzma/check/crc32_table_be.h b/src/liblzma/check/crc32_table_be.h new file mode 100644 index 0000000..c483cb6 --- /dev/null +++ b/src/liblzma/check/crc32_table_be.h @@ -0,0 +1,525 @@ +/* This file has been automatically generated by crc32_tablegen.c. */ + +const uint32_t lzma_crc32_table[8][256] = { + { + 0x00000000, 0x96300777, 0x2C610EEE, 0xBA510999, + 0x19C46D07, 0x8FF46A70, 0x35A563E9, 0xA395649E, + 0x3288DB0E, 0xA4B8DC79, 0x1EE9D5E0, 0x88D9D297, + 0x2B4CB609, 0xBD7CB17E, 0x072DB8E7, 0x911DBF90, + 0x6410B71D, 0xF220B06A, 0x4871B9F3, 0xDE41BE84, + 0x7DD4DA1A, 0xEBE4DD6D, 0x51B5D4F4, 0xC785D383, + 0x56986C13, 0xC0A86B64, 0x7AF962FD, 0xECC9658A, + 0x4F5C0114, 0xD96C0663, 0x633D0FFA, 0xF50D088D, + 0xC8206E3B, 0x5E10694C, 0xE44160D5, 0x727167A2, + 0xD1E4033C, 0x47D4044B, 0xFD850DD2, 0x6BB50AA5, + 0xFAA8B535, 0x6C98B242, 0xD6C9BBDB, 0x40F9BCAC, + 0xE36CD832, 0x755CDF45, 0xCF0DD6DC, 0x593DD1AB, + 0xAC30D926, 0x3A00DE51, 0x8051D7C8, 0x1661D0BF, + 0xB5F4B421, 0x23C4B356, 0x9995BACF, 0x0FA5BDB8, + 0x9EB80228, 0x0888055F, 0xB2D90CC6, 0x24E90BB1, + 0x877C6F2F, 0x114C6858, 0xAB1D61C1, 0x3D2D66B6, + 0x9041DC76, 0x0671DB01, 0xBC20D298, 0x2A10D5EF, + 0x8985B171, 0x1FB5B606, 0xA5E4BF9F, 0x33D4B8E8, + 0xA2C90778, 0x34F9000F, 0x8EA80996, 0x18980EE1, + 0xBB0D6A7F, 0x2D3D6D08, 0x976C6491, 0x015C63E6, + 0xF4516B6B, 0x62616C1C, 0xD8306585, 0x4E0062F2, + 0xED95066C, 0x7BA5011B, 0xC1F40882, 0x57C40FF5, + 0xC6D9B065, 0x50E9B712, 0xEAB8BE8B, 0x7C88B9FC, + 0xDF1DDD62, 0x492DDA15, 0xF37CD38C, 0x654CD4FB, + 0x5861B24D, 0xCE51B53A, 0x7400BCA3, 0xE230BBD4, + 0x41A5DF4A, 0xD795D83D, 0x6DC4D1A4, 0xFBF4D6D3, + 0x6AE96943, 0xFCD96E34, 0x468867AD, 0xD0B860DA, + 0x732D0444, 0xE51D0333, 0x5F4C0AAA, 0xC97C0DDD, + 0x3C710550, 0xAA410227, 0x10100BBE, 0x86200CC9, + 0x25B56857, 0xB3856F20, 0x09D466B9, 0x9FE461CE, + 0x0EF9DE5E, 0x98C9D929, 0x2298D0B0, 0xB4A8D7C7, + 0x173DB359, 0x810DB42E, 0x3B5CBDB7, 0xAD6CBAC0, + 0x2083B8ED, 0xB6B3BF9A, 0x0CE2B603, 0x9AD2B174, + 0x3947D5EA, 0xAF77D29D, 0x1526DB04, 0x8316DC73, + 0x120B63E3, 0x843B6494, 0x3E6A6D0D, 0xA85A6A7A, + 0x0BCF0EE4, 0x9DFF0993, 0x27AE000A, 0xB19E077D, + 0x44930FF0, 0xD2A30887, 0x68F2011E, 0xFEC20669, + 0x5D5762F7, 0xCB676580, 0x71366C19, 0xE7066B6E, + 0x761BD4FE, 0xE02BD389, 0x5A7ADA10, 0xCC4ADD67, + 0x6FDFB9F9, 0xF9EFBE8E, 0x43BEB717, 0xD58EB060, + 0xE8A3D6D6, 0x7E93D1A1, 0xC4C2D838, 0x52F2DF4F, + 0xF167BBD1, 0x6757BCA6, 0xDD06B53F, 0x4B36B248, + 0xDA2B0DD8, 0x4C1B0AAF, 0xF64A0336, 0x607A0441, + 0xC3EF60DF, 0x55DF67A8, 0xEF8E6E31, 0x79BE6946, + 0x8CB361CB, 0x1A8366BC, 0xA0D26F25, 0x36E26852, + 0x95770CCC, 0x03470BBB, 0xB9160222, 0x2F260555, + 0xBE3BBAC5, 0x280BBDB2, 0x925AB42B, 0x046AB35C, + 0xA7FFD7C2, 0x31CFD0B5, 0x8B9ED92C, 0x1DAEDE5B, + 0xB0C2649B, 0x26F263EC, 0x9CA36A75, 0x0A936D02, + 0xA906099C, 0x3F360EEB, 0x85670772, 0x13570005, + 0x824ABF95, 0x147AB8E2, 0xAE2BB17B, 0x381BB60C, + 0x9B8ED292, 0x0DBED5E5, 0xB7EFDC7C, 0x21DFDB0B, + 0xD4D2D386, 0x42E2D4F1, 0xF8B3DD68, 0x6E83DA1F, + 0xCD16BE81, 0x5B26B9F6, 0xE177B06F, 0x7747B718, + 0xE65A0888, 0x706A0FFF, 0xCA3B0666, 0x5C0B0111, + 0xFF9E658F, 0x69AE62F8, 0xD3FF6B61, 0x45CF6C16, + 0x78E20AA0, 0xEED20DD7, 0x5483044E, 0xC2B30339, + 0x612667A7, 0xF71660D0, 0x4D476949, 0xDB776E3E, + 0x4A6AD1AE, 0xDC5AD6D9, 0x660BDF40, 0xF03BD837, + 0x53AEBCA9, 0xC59EBBDE, 0x7FCFB247, 0xE9FFB530, + 0x1CF2BDBD, 0x8AC2BACA, 0x3093B353, 0xA6A3B424, + 0x0536D0BA, 0x9306D7CD, 0x2957DE54, 0xBF67D923, + 0x2E7A66B3, 0xB84A61C4, 0x021B685D, 0x942B6F2A, + 0x37BE0BB4, 0xA18E0CC3, 0x1BDF055A, 0x8DEF022D + }, { + 0x00000000, 0x41311B19, 0x82623632, 0xC3532D2B, + 0x04C56C64, 0x45F4777D, 0x86A75A56, 0xC796414F, + 0x088AD9C8, 0x49BBC2D1, 0x8AE8EFFA, 0xCBD9F4E3, + 0x0C4FB5AC, 0x4D7EAEB5, 0x8E2D839E, 0xCF1C9887, + 0x5112C24A, 0x1023D953, 0xD370F478, 0x9241EF61, + 0x55D7AE2E, 0x14E6B537, 0xD7B5981C, 0x96848305, + 0x59981B82, 0x18A9009B, 0xDBFA2DB0, 0x9ACB36A9, + 0x5D5D77E6, 0x1C6C6CFF, 0xDF3F41D4, 0x9E0E5ACD, + 0xA2248495, 0xE3159F8C, 0x2046B2A7, 0x6177A9BE, + 0xA6E1E8F1, 0xE7D0F3E8, 0x2483DEC3, 0x65B2C5DA, + 0xAAAE5D5D, 0xEB9F4644, 0x28CC6B6F, 0x69FD7076, + 0xAE6B3139, 0xEF5A2A20, 0x2C09070B, 0x6D381C12, + 0xF33646DF, 0xB2075DC6, 0x715470ED, 0x30656BF4, + 0xF7F32ABB, 0xB6C231A2, 0x75911C89, 0x34A00790, + 0xFBBC9F17, 0xBA8D840E, 0x79DEA925, 0x38EFB23C, + 0xFF79F373, 0xBE48E86A, 0x7D1BC541, 0x3C2ADE58, + 0x054F79F0, 0x447E62E9, 0x872D4FC2, 0xC61C54DB, + 0x018A1594, 0x40BB0E8D, 0x83E823A6, 0xC2D938BF, + 0x0DC5A038, 0x4CF4BB21, 0x8FA7960A, 0xCE968D13, + 0x0900CC5C, 0x4831D745, 0x8B62FA6E, 0xCA53E177, + 0x545DBBBA, 0x156CA0A3, 0xD63F8D88, 0x970E9691, + 0x5098D7DE, 0x11A9CCC7, 0xD2FAE1EC, 0x93CBFAF5, + 0x5CD76272, 0x1DE6796B, 0xDEB55440, 0x9F844F59, + 0x58120E16, 0x1923150F, 0xDA703824, 0x9B41233D, + 0xA76BFD65, 0xE65AE67C, 0x2509CB57, 0x6438D04E, + 0xA3AE9101, 0xE29F8A18, 0x21CCA733, 0x60FDBC2A, + 0xAFE124AD, 0xEED03FB4, 0x2D83129F, 0x6CB20986, + 0xAB2448C9, 0xEA1553D0, 0x29467EFB, 0x687765E2, + 0xF6793F2F, 0xB7482436, 0x741B091D, 0x352A1204, + 0xF2BC534B, 0xB38D4852, 0x70DE6579, 0x31EF7E60, + 0xFEF3E6E7, 0xBFC2FDFE, 0x7C91D0D5, 0x3DA0CBCC, + 0xFA368A83, 0xBB07919A, 0x7854BCB1, 0x3965A7A8, + 0x4B98833B, 0x0AA99822, 0xC9FAB509, 0x88CBAE10, + 0x4F5DEF5F, 0x0E6CF446, 0xCD3FD96D, 0x8C0EC274, + 0x43125AF3, 0x022341EA, 0xC1706CC1, 0x804177D8, + 0x47D73697, 0x06E62D8E, 0xC5B500A5, 0x84841BBC, + 0x1A8A4171, 0x5BBB5A68, 0x98E87743, 0xD9D96C5A, + 0x1E4F2D15, 0x5F7E360C, 0x9C2D1B27, 0xDD1C003E, + 0x120098B9, 0x533183A0, 0x9062AE8B, 0xD153B592, + 0x16C5F4DD, 0x57F4EFC4, 0x94A7C2EF, 0xD596D9F6, + 0xE9BC07AE, 0xA88D1CB7, 0x6BDE319C, 0x2AEF2A85, + 0xED796BCA, 0xAC4870D3, 0x6F1B5DF8, 0x2E2A46E1, + 0xE136DE66, 0xA007C57F, 0x6354E854, 0x2265F34D, + 0xE5F3B202, 0xA4C2A91B, 0x67918430, 0x26A09F29, + 0xB8AEC5E4, 0xF99FDEFD, 0x3ACCF3D6, 0x7BFDE8CF, + 0xBC6BA980, 0xFD5AB299, 0x3E099FB2, 0x7F3884AB, + 0xB0241C2C, 0xF1150735, 0x32462A1E, 0x73773107, + 0xB4E17048, 0xF5D06B51, 0x3683467A, 0x77B25D63, + 0x4ED7FACB, 0x0FE6E1D2, 0xCCB5CCF9, 0x8D84D7E0, + 0x4A1296AF, 0x0B238DB6, 0xC870A09D, 0x8941BB84, + 0x465D2303, 0x076C381A, 0xC43F1531, 0x850E0E28, + 0x42984F67, 0x03A9547E, 0xC0FA7955, 0x81CB624C, + 0x1FC53881, 0x5EF42398, 0x9DA70EB3, 0xDC9615AA, + 0x1B0054E5, 0x5A314FFC, 0x996262D7, 0xD85379CE, + 0x174FE149, 0x567EFA50, 0x952DD77B, 0xD41CCC62, + 0x138A8D2D, 0x52BB9634, 0x91E8BB1F, 0xD0D9A006, + 0xECF37E5E, 0xADC26547, 0x6E91486C, 0x2FA05375, + 0xE836123A, 0xA9070923, 0x6A542408, 0x2B653F11, + 0xE479A796, 0xA548BC8F, 0x661B91A4, 0x272A8ABD, + 0xE0BCCBF2, 0xA18DD0EB, 0x62DEFDC0, 0x23EFE6D9, + 0xBDE1BC14, 0xFCD0A70D, 0x3F838A26, 0x7EB2913F, + 0xB924D070, 0xF815CB69, 0x3B46E642, 0x7A77FD5B, + 0xB56B65DC, 0xF45A7EC5, 0x370953EE, 0x763848F7, + 0xB1AE09B8, 0xF09F12A1, 0x33CC3F8A, 0x72FD2493 + }, { + 0x00000000, 0x376AC201, 0x6ED48403, 0x59BE4602, + 0xDCA80907, 0xEBC2CB06, 0xB27C8D04, 0x85164F05, + 0xB851130E, 0x8F3BD10F, 0xD685970D, 0xE1EF550C, + 0x64F91A09, 0x5393D808, 0x0A2D9E0A, 0x3D475C0B, + 0x70A3261C, 0x47C9E41D, 0x1E77A21F, 0x291D601E, + 0xAC0B2F1B, 0x9B61ED1A, 0xC2DFAB18, 0xF5B56919, + 0xC8F23512, 0xFF98F713, 0xA626B111, 0x914C7310, + 0x145A3C15, 0x2330FE14, 0x7A8EB816, 0x4DE47A17, + 0xE0464D38, 0xD72C8F39, 0x8E92C93B, 0xB9F80B3A, + 0x3CEE443F, 0x0B84863E, 0x523AC03C, 0x6550023D, + 0x58175E36, 0x6F7D9C37, 0x36C3DA35, 0x01A91834, + 0x84BF5731, 0xB3D59530, 0xEA6BD332, 0xDD011133, + 0x90E56B24, 0xA78FA925, 0xFE31EF27, 0xC95B2D26, + 0x4C4D6223, 0x7B27A022, 0x2299E620, 0x15F32421, + 0x28B4782A, 0x1FDEBA2B, 0x4660FC29, 0x710A3E28, + 0xF41C712D, 0xC376B32C, 0x9AC8F52E, 0xADA2372F, + 0xC08D9A70, 0xF7E75871, 0xAE591E73, 0x9933DC72, + 0x1C259377, 0x2B4F5176, 0x72F11774, 0x459BD575, + 0x78DC897E, 0x4FB64B7F, 0x16080D7D, 0x2162CF7C, + 0xA4748079, 0x931E4278, 0xCAA0047A, 0xFDCAC67B, + 0xB02EBC6C, 0x87447E6D, 0xDEFA386F, 0xE990FA6E, + 0x6C86B56B, 0x5BEC776A, 0x02523168, 0x3538F369, + 0x087FAF62, 0x3F156D63, 0x66AB2B61, 0x51C1E960, + 0xD4D7A665, 0xE3BD6464, 0xBA032266, 0x8D69E067, + 0x20CBD748, 0x17A11549, 0x4E1F534B, 0x7975914A, + 0xFC63DE4F, 0xCB091C4E, 0x92B75A4C, 0xA5DD984D, + 0x989AC446, 0xAFF00647, 0xF64E4045, 0xC1248244, + 0x4432CD41, 0x73580F40, 0x2AE64942, 0x1D8C8B43, + 0x5068F154, 0x67023355, 0x3EBC7557, 0x09D6B756, + 0x8CC0F853, 0xBBAA3A52, 0xE2147C50, 0xD57EBE51, + 0xE839E25A, 0xDF53205B, 0x86ED6659, 0xB187A458, + 0x3491EB5D, 0x03FB295C, 0x5A456F5E, 0x6D2FAD5F, + 0x801B35E1, 0xB771F7E0, 0xEECFB1E2, 0xD9A573E3, + 0x5CB33CE6, 0x6BD9FEE7, 0x3267B8E5, 0x050D7AE4, + 0x384A26EF, 0x0F20E4EE, 0x569EA2EC, 0x61F460ED, + 0xE4E22FE8, 0xD388EDE9, 0x8A36ABEB, 0xBD5C69EA, + 0xF0B813FD, 0xC7D2D1FC, 0x9E6C97FE, 0xA90655FF, + 0x2C101AFA, 0x1B7AD8FB, 0x42C49EF9, 0x75AE5CF8, + 0x48E900F3, 0x7F83C2F2, 0x263D84F0, 0x115746F1, + 0x944109F4, 0xA32BCBF5, 0xFA958DF7, 0xCDFF4FF6, + 0x605D78D9, 0x5737BAD8, 0x0E89FCDA, 0x39E33EDB, + 0xBCF571DE, 0x8B9FB3DF, 0xD221F5DD, 0xE54B37DC, + 0xD80C6BD7, 0xEF66A9D6, 0xB6D8EFD4, 0x81B22DD5, + 0x04A462D0, 0x33CEA0D1, 0x6A70E6D3, 0x5D1A24D2, + 0x10FE5EC5, 0x27949CC4, 0x7E2ADAC6, 0x494018C7, + 0xCC5657C2, 0xFB3C95C3, 0xA282D3C1, 0x95E811C0, + 0xA8AF4DCB, 0x9FC58FCA, 0xC67BC9C8, 0xF1110BC9, + 0x740744CC, 0x436D86CD, 0x1AD3C0CF, 0x2DB902CE, + 0x4096AF91, 0x77FC6D90, 0x2E422B92, 0x1928E993, + 0x9C3EA696, 0xAB546497, 0xF2EA2295, 0xC580E094, + 0xF8C7BC9F, 0xCFAD7E9E, 0x9613389C, 0xA179FA9D, + 0x246FB598, 0x13057799, 0x4ABB319B, 0x7DD1F39A, + 0x3035898D, 0x075F4B8C, 0x5EE10D8E, 0x698BCF8F, + 0xEC9D808A, 0xDBF7428B, 0x82490489, 0xB523C688, + 0x88649A83, 0xBF0E5882, 0xE6B01E80, 0xD1DADC81, + 0x54CC9384, 0x63A65185, 0x3A181787, 0x0D72D586, + 0xA0D0E2A9, 0x97BA20A8, 0xCE0466AA, 0xF96EA4AB, + 0x7C78EBAE, 0x4B1229AF, 0x12AC6FAD, 0x25C6ADAC, + 0x1881F1A7, 0x2FEB33A6, 0x765575A4, 0x413FB7A5, + 0xC429F8A0, 0xF3433AA1, 0xAAFD7CA3, 0x9D97BEA2, + 0xD073C4B5, 0xE71906B4, 0xBEA740B6, 0x89CD82B7, + 0x0CDBCDB2, 0x3BB10FB3, 0x620F49B1, 0x55658BB0, + 0x6822D7BB, 0x5F4815BA, 0x06F653B8, 0x319C91B9, + 0xB48ADEBC, 0x83E01CBD, 0xDA5E5ABF, 0xED3498BE + }, { + 0x00000000, 0x6567BCB8, 0x8BC809AA, 0xEEAFB512, + 0x5797628F, 0x32F0DE37, 0xDC5F6B25, 0xB938D79D, + 0xEF28B4C5, 0x8A4F087D, 0x64E0BD6F, 0x018701D7, + 0xB8BFD64A, 0xDDD86AF2, 0x3377DFE0, 0x56106358, + 0x9F571950, 0xFA30A5E8, 0x149F10FA, 0x71F8AC42, + 0xC8C07BDF, 0xADA7C767, 0x43087275, 0x266FCECD, + 0x707FAD95, 0x1518112D, 0xFBB7A43F, 0x9ED01887, + 0x27E8CF1A, 0x428F73A2, 0xAC20C6B0, 0xC9477A08, + 0x3EAF32A0, 0x5BC88E18, 0xB5673B0A, 0xD00087B2, + 0x6938502F, 0x0C5FEC97, 0xE2F05985, 0x8797E53D, + 0xD1878665, 0xB4E03ADD, 0x5A4F8FCF, 0x3F283377, + 0x8610E4EA, 0xE3775852, 0x0DD8ED40, 0x68BF51F8, + 0xA1F82BF0, 0xC49F9748, 0x2A30225A, 0x4F579EE2, + 0xF66F497F, 0x9308F5C7, 0x7DA740D5, 0x18C0FC6D, + 0x4ED09F35, 0x2BB7238D, 0xC518969F, 0xA07F2A27, + 0x1947FDBA, 0x7C204102, 0x928FF410, 0xF7E848A8, + 0x3D58149B, 0x583FA823, 0xB6901D31, 0xD3F7A189, + 0x6ACF7614, 0x0FA8CAAC, 0xE1077FBE, 0x8460C306, + 0xD270A05E, 0xB7171CE6, 0x59B8A9F4, 0x3CDF154C, + 0x85E7C2D1, 0xE0807E69, 0x0E2FCB7B, 0x6B4877C3, + 0xA20F0DCB, 0xC768B173, 0x29C70461, 0x4CA0B8D9, + 0xF5986F44, 0x90FFD3FC, 0x7E5066EE, 0x1B37DA56, + 0x4D27B90E, 0x284005B6, 0xC6EFB0A4, 0xA3880C1C, + 0x1AB0DB81, 0x7FD76739, 0x9178D22B, 0xF41F6E93, + 0x03F7263B, 0x66909A83, 0x883F2F91, 0xED589329, + 0x546044B4, 0x3107F80C, 0xDFA84D1E, 0xBACFF1A6, + 0xECDF92FE, 0x89B82E46, 0x67179B54, 0x027027EC, + 0xBB48F071, 0xDE2F4CC9, 0x3080F9DB, 0x55E74563, + 0x9CA03F6B, 0xF9C783D3, 0x176836C1, 0x720F8A79, + 0xCB375DE4, 0xAE50E15C, 0x40FF544E, 0x2598E8F6, + 0x73888BAE, 0x16EF3716, 0xF8408204, 0x9D273EBC, + 0x241FE921, 0x41785599, 0xAFD7E08B, 0xCAB05C33, + 0x3BB659ED, 0x5ED1E555, 0xB07E5047, 0xD519ECFF, + 0x6C213B62, 0x094687DA, 0xE7E932C8, 0x828E8E70, + 0xD49EED28, 0xB1F95190, 0x5F56E482, 0x3A31583A, + 0x83098FA7, 0xE66E331F, 0x08C1860D, 0x6DA63AB5, + 0xA4E140BD, 0xC186FC05, 0x2F294917, 0x4A4EF5AF, + 0xF3762232, 0x96119E8A, 0x78BE2B98, 0x1DD99720, + 0x4BC9F478, 0x2EAE48C0, 0xC001FDD2, 0xA566416A, + 0x1C5E96F7, 0x79392A4F, 0x97969F5D, 0xF2F123E5, + 0x05196B4D, 0x607ED7F5, 0x8ED162E7, 0xEBB6DE5F, + 0x528E09C2, 0x37E9B57A, 0xD9460068, 0xBC21BCD0, + 0xEA31DF88, 0x8F566330, 0x61F9D622, 0x049E6A9A, + 0xBDA6BD07, 0xD8C101BF, 0x366EB4AD, 0x53090815, + 0x9A4E721D, 0xFF29CEA5, 0x11867BB7, 0x74E1C70F, + 0xCDD91092, 0xA8BEAC2A, 0x46111938, 0x2376A580, + 0x7566C6D8, 0x10017A60, 0xFEAECF72, 0x9BC973CA, + 0x22F1A457, 0x479618EF, 0xA939ADFD, 0xCC5E1145, + 0x06EE4D76, 0x6389F1CE, 0x8D2644DC, 0xE841F864, + 0x51792FF9, 0x341E9341, 0xDAB12653, 0xBFD69AEB, + 0xE9C6F9B3, 0x8CA1450B, 0x620EF019, 0x07694CA1, + 0xBE519B3C, 0xDB362784, 0x35999296, 0x50FE2E2E, + 0x99B95426, 0xFCDEE89E, 0x12715D8C, 0x7716E134, + 0xCE2E36A9, 0xAB498A11, 0x45E63F03, 0x208183BB, + 0x7691E0E3, 0x13F65C5B, 0xFD59E949, 0x983E55F1, + 0x2106826C, 0x44613ED4, 0xAACE8BC6, 0xCFA9377E, + 0x38417FD6, 0x5D26C36E, 0xB389767C, 0xD6EECAC4, + 0x6FD61D59, 0x0AB1A1E1, 0xE41E14F3, 0x8179A84B, + 0xD769CB13, 0xB20E77AB, 0x5CA1C2B9, 0x39C67E01, + 0x80FEA99C, 0xE5991524, 0x0B36A036, 0x6E511C8E, + 0xA7166686, 0xC271DA3E, 0x2CDE6F2C, 0x49B9D394, + 0xF0810409, 0x95E6B8B1, 0x7B490DA3, 0x1E2EB11B, + 0x483ED243, 0x2D596EFB, 0xC3F6DBE9, 0xA6916751, + 0x1FA9B0CC, 0x7ACE0C74, 0x9461B966, 0xF10605DE + }, { + 0x00000000, 0xB029603D, 0x6053C07A, 0xD07AA047, + 0xC0A680F5, 0x708FE0C8, 0xA0F5408F, 0x10DC20B2, + 0xC14B7030, 0x7162100D, 0xA118B04A, 0x1131D077, + 0x01EDF0C5, 0xB1C490F8, 0x61BE30BF, 0xD1975082, + 0x8297E060, 0x32BE805D, 0xE2C4201A, 0x52ED4027, + 0x42316095, 0xF21800A8, 0x2262A0EF, 0x924BC0D2, + 0x43DC9050, 0xF3F5F06D, 0x238F502A, 0x93A63017, + 0x837A10A5, 0x33537098, 0xE329D0DF, 0x5300B0E2, + 0x042FC1C1, 0xB406A1FC, 0x647C01BB, 0xD4556186, + 0xC4894134, 0x74A02109, 0xA4DA814E, 0x14F3E173, + 0xC564B1F1, 0x754DD1CC, 0xA537718B, 0x151E11B6, + 0x05C23104, 0xB5EB5139, 0x6591F17E, 0xD5B89143, + 0x86B821A1, 0x3691419C, 0xE6EBE1DB, 0x56C281E6, + 0x461EA154, 0xF637C169, 0x264D612E, 0x96640113, + 0x47F35191, 0xF7DA31AC, 0x27A091EB, 0x9789F1D6, + 0x8755D164, 0x377CB159, 0xE706111E, 0x572F7123, + 0x4958F358, 0xF9719365, 0x290B3322, 0x9922531F, + 0x89FE73AD, 0x39D71390, 0xE9ADB3D7, 0x5984D3EA, + 0x88138368, 0x383AE355, 0xE8404312, 0x5869232F, + 0x48B5039D, 0xF89C63A0, 0x28E6C3E7, 0x98CFA3DA, + 0xCBCF1338, 0x7BE67305, 0xAB9CD342, 0x1BB5B37F, + 0x0B6993CD, 0xBB40F3F0, 0x6B3A53B7, 0xDB13338A, + 0x0A846308, 0xBAAD0335, 0x6AD7A372, 0xDAFEC34F, + 0xCA22E3FD, 0x7A0B83C0, 0xAA712387, 0x1A5843BA, + 0x4D773299, 0xFD5E52A4, 0x2D24F2E3, 0x9D0D92DE, + 0x8DD1B26C, 0x3DF8D251, 0xED827216, 0x5DAB122B, + 0x8C3C42A9, 0x3C152294, 0xEC6F82D3, 0x5C46E2EE, + 0x4C9AC25C, 0xFCB3A261, 0x2CC90226, 0x9CE0621B, + 0xCFE0D2F9, 0x7FC9B2C4, 0xAFB31283, 0x1F9A72BE, + 0x0F46520C, 0xBF6F3231, 0x6F159276, 0xDF3CF24B, + 0x0EABA2C9, 0xBE82C2F4, 0x6EF862B3, 0xDED1028E, + 0xCE0D223C, 0x7E244201, 0xAE5EE246, 0x1E77827B, + 0x92B0E6B1, 0x2299868C, 0xF2E326CB, 0x42CA46F6, + 0x52166644, 0xE23F0679, 0x3245A63E, 0x826CC603, + 0x53FB9681, 0xE3D2F6BC, 0x33A856FB, 0x838136C6, + 0x935D1674, 0x23747649, 0xF30ED60E, 0x4327B633, + 0x102706D1, 0xA00E66EC, 0x7074C6AB, 0xC05DA696, + 0xD0818624, 0x60A8E619, 0xB0D2465E, 0x00FB2663, + 0xD16C76E1, 0x614516DC, 0xB13FB69B, 0x0116D6A6, + 0x11CAF614, 0xA1E39629, 0x7199366E, 0xC1B05653, + 0x969F2770, 0x26B6474D, 0xF6CCE70A, 0x46E58737, + 0x5639A785, 0xE610C7B8, 0x366A67FF, 0x864307C2, + 0x57D45740, 0xE7FD377D, 0x3787973A, 0x87AEF707, + 0x9772D7B5, 0x275BB788, 0xF72117CF, 0x470877F2, + 0x1408C710, 0xA421A72D, 0x745B076A, 0xC4726757, + 0xD4AE47E5, 0x648727D8, 0xB4FD879F, 0x04D4E7A2, + 0xD543B720, 0x656AD71D, 0xB510775A, 0x05391767, + 0x15E537D5, 0xA5CC57E8, 0x75B6F7AF, 0xC59F9792, + 0xDBE815E9, 0x6BC175D4, 0xBBBBD593, 0x0B92B5AE, + 0x1B4E951C, 0xAB67F521, 0x7B1D5566, 0xCB34355B, + 0x1AA365D9, 0xAA8A05E4, 0x7AF0A5A3, 0xCAD9C59E, + 0xDA05E52C, 0x6A2C8511, 0xBA562556, 0x0A7F456B, + 0x597FF589, 0xE95695B4, 0x392C35F3, 0x890555CE, + 0x99D9757C, 0x29F01541, 0xF98AB506, 0x49A3D53B, + 0x983485B9, 0x281DE584, 0xF86745C3, 0x484E25FE, + 0x5892054C, 0xE8BB6571, 0x38C1C536, 0x88E8A50B, + 0xDFC7D428, 0x6FEEB415, 0xBF941452, 0x0FBD746F, + 0x1F6154DD, 0xAF4834E0, 0x7F3294A7, 0xCF1BF49A, + 0x1E8CA418, 0xAEA5C425, 0x7EDF6462, 0xCEF6045F, + 0xDE2A24ED, 0x6E0344D0, 0xBE79E497, 0x0E5084AA, + 0x5D503448, 0xED795475, 0x3D03F432, 0x8D2A940F, + 0x9DF6B4BD, 0x2DDFD480, 0xFDA574C7, 0x4D8C14FA, + 0x9C1B4478, 0x2C322445, 0xFC488402, 0x4C61E43F, + 0x5CBDC48D, 0xEC94A4B0, 0x3CEE04F7, 0x8CC764CA + }, { + 0x00000000, 0xA5D35CCB, 0x0BA1C84D, 0xAE729486, + 0x1642919B, 0xB391CD50, 0x1DE359D6, 0xB830051D, + 0x6D8253EC, 0xC8510F27, 0x66239BA1, 0xC3F0C76A, + 0x7BC0C277, 0xDE139EBC, 0x70610A3A, 0xD5B256F1, + 0x9B02D603, 0x3ED18AC8, 0x90A31E4E, 0x35704285, + 0x8D404798, 0x28931B53, 0x86E18FD5, 0x2332D31E, + 0xF68085EF, 0x5353D924, 0xFD214DA2, 0x58F21169, + 0xE0C21474, 0x451148BF, 0xEB63DC39, 0x4EB080F2, + 0x3605AC07, 0x93D6F0CC, 0x3DA4644A, 0x98773881, + 0x20473D9C, 0x85946157, 0x2BE6F5D1, 0x8E35A91A, + 0x5B87FFEB, 0xFE54A320, 0x502637A6, 0xF5F56B6D, + 0x4DC56E70, 0xE81632BB, 0x4664A63D, 0xE3B7FAF6, + 0xAD077A04, 0x08D426CF, 0xA6A6B249, 0x0375EE82, + 0xBB45EB9F, 0x1E96B754, 0xB0E423D2, 0x15377F19, + 0xC08529E8, 0x65567523, 0xCB24E1A5, 0x6EF7BD6E, + 0xD6C7B873, 0x7314E4B8, 0xDD66703E, 0x78B52CF5, + 0x6C0A580F, 0xC9D904C4, 0x67AB9042, 0xC278CC89, + 0x7A48C994, 0xDF9B955F, 0x71E901D9, 0xD43A5D12, + 0x01880BE3, 0xA45B5728, 0x0A29C3AE, 0xAFFA9F65, + 0x17CA9A78, 0xB219C6B3, 0x1C6B5235, 0xB9B80EFE, + 0xF7088E0C, 0x52DBD2C7, 0xFCA94641, 0x597A1A8A, + 0xE14A1F97, 0x4499435C, 0xEAEBD7DA, 0x4F388B11, + 0x9A8ADDE0, 0x3F59812B, 0x912B15AD, 0x34F84966, + 0x8CC84C7B, 0x291B10B0, 0x87698436, 0x22BAD8FD, + 0x5A0FF408, 0xFFDCA8C3, 0x51AE3C45, 0xF47D608E, + 0x4C4D6593, 0xE99E3958, 0x47ECADDE, 0xE23FF115, + 0x378DA7E4, 0x925EFB2F, 0x3C2C6FA9, 0x99FF3362, + 0x21CF367F, 0x841C6AB4, 0x2A6EFE32, 0x8FBDA2F9, + 0xC10D220B, 0x64DE7EC0, 0xCAACEA46, 0x6F7FB68D, + 0xD74FB390, 0x729CEF5B, 0xDCEE7BDD, 0x793D2716, + 0xAC8F71E7, 0x095C2D2C, 0xA72EB9AA, 0x02FDE561, + 0xBACDE07C, 0x1F1EBCB7, 0xB16C2831, 0x14BF74FA, + 0xD814B01E, 0x7DC7ECD5, 0xD3B57853, 0x76662498, + 0xCE562185, 0x6B857D4E, 0xC5F7E9C8, 0x6024B503, + 0xB596E3F2, 0x1045BF39, 0xBE372BBF, 0x1BE47774, + 0xA3D47269, 0x06072EA2, 0xA875BA24, 0x0DA6E6EF, + 0x4316661D, 0xE6C53AD6, 0x48B7AE50, 0xED64F29B, + 0x5554F786, 0xF087AB4D, 0x5EF53FCB, 0xFB266300, + 0x2E9435F1, 0x8B47693A, 0x2535FDBC, 0x80E6A177, + 0x38D6A46A, 0x9D05F8A1, 0x33776C27, 0x96A430EC, + 0xEE111C19, 0x4BC240D2, 0xE5B0D454, 0x4063889F, + 0xF8538D82, 0x5D80D149, 0xF3F245CF, 0x56211904, + 0x83934FF5, 0x2640133E, 0x883287B8, 0x2DE1DB73, + 0x95D1DE6E, 0x300282A5, 0x9E701623, 0x3BA34AE8, + 0x7513CA1A, 0xD0C096D1, 0x7EB20257, 0xDB615E9C, + 0x63515B81, 0xC682074A, 0x68F093CC, 0xCD23CF07, + 0x189199F6, 0xBD42C53D, 0x133051BB, 0xB6E30D70, + 0x0ED3086D, 0xAB0054A6, 0x0572C020, 0xA0A19CEB, + 0xB41EE811, 0x11CDB4DA, 0xBFBF205C, 0x1A6C7C97, + 0xA25C798A, 0x078F2541, 0xA9FDB1C7, 0x0C2EED0C, + 0xD99CBBFD, 0x7C4FE736, 0xD23D73B0, 0x77EE2F7B, + 0xCFDE2A66, 0x6A0D76AD, 0xC47FE22B, 0x61ACBEE0, + 0x2F1C3E12, 0x8ACF62D9, 0x24BDF65F, 0x816EAA94, + 0x395EAF89, 0x9C8DF342, 0x32FF67C4, 0x972C3B0F, + 0x429E6DFE, 0xE74D3135, 0x493FA5B3, 0xECECF978, + 0x54DCFC65, 0xF10FA0AE, 0x5F7D3428, 0xFAAE68E3, + 0x821B4416, 0x27C818DD, 0x89BA8C5B, 0x2C69D090, + 0x9459D58D, 0x318A8946, 0x9FF81DC0, 0x3A2B410B, + 0xEF9917FA, 0x4A4A4B31, 0xE438DFB7, 0x41EB837C, + 0xF9DB8661, 0x5C08DAAA, 0xF27A4E2C, 0x57A912E7, + 0x19199215, 0xBCCACEDE, 0x12B85A58, 0xB76B0693, + 0x0F5B038E, 0xAA885F45, 0x04FACBC3, 0xA1299708, + 0x749BC1F9, 0xD1489D32, 0x7F3A09B4, 0xDAE9557F, + 0x62D95062, 0xC70A0CA9, 0x6978982F, 0xCCABC4E4 + }, { + 0x00000000, 0xB40B77A6, 0x29119F97, 0x9D1AE831, + 0x13244FF4, 0xA72F3852, 0x3A35D063, 0x8E3EA7C5, + 0x674EEF33, 0xD3459895, 0x4E5F70A4, 0xFA540702, + 0x746AA0C7, 0xC061D761, 0x5D7B3F50, 0xE97048F6, + 0xCE9CDE67, 0x7A97A9C1, 0xE78D41F0, 0x53863656, + 0xDDB89193, 0x69B3E635, 0xF4A90E04, 0x40A279A2, + 0xA9D23154, 0x1DD946F2, 0x80C3AEC3, 0x34C8D965, + 0xBAF67EA0, 0x0EFD0906, 0x93E7E137, 0x27EC9691, + 0x9C39BDCF, 0x2832CA69, 0xB5282258, 0x012355FE, + 0x8F1DF23B, 0x3B16859D, 0xA60C6DAC, 0x12071A0A, + 0xFB7752FC, 0x4F7C255A, 0xD266CD6B, 0x666DBACD, + 0xE8531D08, 0x5C586AAE, 0xC142829F, 0x7549F539, + 0x52A563A8, 0xE6AE140E, 0x7BB4FC3F, 0xCFBF8B99, + 0x41812C5C, 0xF58A5BFA, 0x6890B3CB, 0xDC9BC46D, + 0x35EB8C9B, 0x81E0FB3D, 0x1CFA130C, 0xA8F164AA, + 0x26CFC36F, 0x92C4B4C9, 0x0FDE5CF8, 0xBBD52B5E, + 0x79750B44, 0xCD7E7CE2, 0x506494D3, 0xE46FE375, + 0x6A5144B0, 0xDE5A3316, 0x4340DB27, 0xF74BAC81, + 0x1E3BE477, 0xAA3093D1, 0x372A7BE0, 0x83210C46, + 0x0D1FAB83, 0xB914DC25, 0x240E3414, 0x900543B2, + 0xB7E9D523, 0x03E2A285, 0x9EF84AB4, 0x2AF33D12, + 0xA4CD9AD7, 0x10C6ED71, 0x8DDC0540, 0x39D772E6, + 0xD0A73A10, 0x64AC4DB6, 0xF9B6A587, 0x4DBDD221, + 0xC38375E4, 0x77880242, 0xEA92EA73, 0x5E999DD5, + 0xE54CB68B, 0x5147C12D, 0xCC5D291C, 0x78565EBA, + 0xF668F97F, 0x42638ED9, 0xDF7966E8, 0x6B72114E, + 0x820259B8, 0x36092E1E, 0xAB13C62F, 0x1F18B189, + 0x9126164C, 0x252D61EA, 0xB83789DB, 0x0C3CFE7D, + 0x2BD068EC, 0x9FDB1F4A, 0x02C1F77B, 0xB6CA80DD, + 0x38F42718, 0x8CFF50BE, 0x11E5B88F, 0xA5EECF29, + 0x4C9E87DF, 0xF895F079, 0x658F1848, 0xD1846FEE, + 0x5FBAC82B, 0xEBB1BF8D, 0x76AB57BC, 0xC2A0201A, + 0xF2EA1688, 0x46E1612E, 0xDBFB891F, 0x6FF0FEB9, + 0xE1CE597C, 0x55C52EDA, 0xC8DFC6EB, 0x7CD4B14D, + 0x95A4F9BB, 0x21AF8E1D, 0xBCB5662C, 0x08BE118A, + 0x8680B64F, 0x328BC1E9, 0xAF9129D8, 0x1B9A5E7E, + 0x3C76C8EF, 0x887DBF49, 0x15675778, 0xA16C20DE, + 0x2F52871B, 0x9B59F0BD, 0x0643188C, 0xB2486F2A, + 0x5B3827DC, 0xEF33507A, 0x7229B84B, 0xC622CFED, + 0x481C6828, 0xFC171F8E, 0x610DF7BF, 0xD5068019, + 0x6ED3AB47, 0xDAD8DCE1, 0x47C234D0, 0xF3C94376, + 0x7DF7E4B3, 0xC9FC9315, 0x54E67B24, 0xE0ED0C82, + 0x099D4474, 0xBD9633D2, 0x208CDBE3, 0x9487AC45, + 0x1AB90B80, 0xAEB27C26, 0x33A89417, 0x87A3E3B1, + 0xA04F7520, 0x14440286, 0x895EEAB7, 0x3D559D11, + 0xB36B3AD4, 0x07604D72, 0x9A7AA543, 0x2E71D2E5, + 0xC7019A13, 0x730AEDB5, 0xEE100584, 0x5A1B7222, + 0xD425D5E7, 0x602EA241, 0xFD344A70, 0x493F3DD6, + 0x8B9F1DCC, 0x3F946A6A, 0xA28E825B, 0x1685F5FD, + 0x98BB5238, 0x2CB0259E, 0xB1AACDAF, 0x05A1BA09, + 0xECD1F2FF, 0x58DA8559, 0xC5C06D68, 0x71CB1ACE, + 0xFFF5BD0B, 0x4BFECAAD, 0xD6E4229C, 0x62EF553A, + 0x4503C3AB, 0xF108B40D, 0x6C125C3C, 0xD8192B9A, + 0x56278C5F, 0xE22CFBF9, 0x7F3613C8, 0xCB3D646E, + 0x224D2C98, 0x96465B3E, 0x0B5CB30F, 0xBF57C4A9, + 0x3169636C, 0x856214CA, 0x1878FCFB, 0xAC738B5D, + 0x17A6A003, 0xA3ADD7A5, 0x3EB73F94, 0x8ABC4832, + 0x0482EFF7, 0xB0899851, 0x2D937060, 0x999807C6, + 0x70E84F30, 0xC4E33896, 0x59F9D0A7, 0xEDF2A701, + 0x63CC00C4, 0xD7C77762, 0x4ADD9F53, 0xFED6E8F5, + 0xD93A7E64, 0x6D3109C2, 0xF02BE1F3, 0x44209655, + 0xCA1E3190, 0x7E154636, 0xE30FAE07, 0x5704D9A1, + 0xBE749157, 0x0A7FE6F1, 0x97650EC0, 0x236E7966, + 0xAD50DEA3, 0x195BA905, 0x84414134, 0x304A3692 + }, { + 0x00000000, 0x9E00AACC, 0x7D072542, 0xE3078F8E, + 0xFA0E4A84, 0x640EE048, 0x87096FC6, 0x1909C50A, + 0xB51BE5D3, 0x2B1B4F1F, 0xC81CC091, 0x561C6A5D, + 0x4F15AF57, 0xD115059B, 0x32128A15, 0xAC1220D9, + 0x2B31BB7C, 0xB53111B0, 0x56369E3E, 0xC83634F2, + 0xD13FF1F8, 0x4F3F5B34, 0xAC38D4BA, 0x32387E76, + 0x9E2A5EAF, 0x002AF463, 0xE32D7BED, 0x7D2DD121, + 0x6424142B, 0xFA24BEE7, 0x19233169, 0x87239BA5, + 0x566276F9, 0xC862DC35, 0x2B6553BB, 0xB565F977, + 0xAC6C3C7D, 0x326C96B1, 0xD16B193F, 0x4F6BB3F3, + 0xE379932A, 0x7D7939E6, 0x9E7EB668, 0x007E1CA4, + 0x1977D9AE, 0x87777362, 0x6470FCEC, 0xFA705620, + 0x7D53CD85, 0xE3536749, 0x0054E8C7, 0x9E54420B, + 0x875D8701, 0x195D2DCD, 0xFA5AA243, 0x645A088F, + 0xC8482856, 0x5648829A, 0xB54F0D14, 0x2B4FA7D8, + 0x324662D2, 0xAC46C81E, 0x4F414790, 0xD141ED5C, + 0xEDC29D29, 0x73C237E5, 0x90C5B86B, 0x0EC512A7, + 0x17CCD7AD, 0x89CC7D61, 0x6ACBF2EF, 0xF4CB5823, + 0x58D978FA, 0xC6D9D236, 0x25DE5DB8, 0xBBDEF774, + 0xA2D7327E, 0x3CD798B2, 0xDFD0173C, 0x41D0BDF0, + 0xC6F32655, 0x58F38C99, 0xBBF40317, 0x25F4A9DB, + 0x3CFD6CD1, 0xA2FDC61D, 0x41FA4993, 0xDFFAE35F, + 0x73E8C386, 0xEDE8694A, 0x0EEFE6C4, 0x90EF4C08, + 0x89E68902, 0x17E623CE, 0xF4E1AC40, 0x6AE1068C, + 0xBBA0EBD0, 0x25A0411C, 0xC6A7CE92, 0x58A7645E, + 0x41AEA154, 0xDFAE0B98, 0x3CA98416, 0xA2A92EDA, + 0x0EBB0E03, 0x90BBA4CF, 0x73BC2B41, 0xEDBC818D, + 0xF4B54487, 0x6AB5EE4B, 0x89B261C5, 0x17B2CB09, + 0x909150AC, 0x0E91FA60, 0xED9675EE, 0x7396DF22, + 0x6A9F1A28, 0xF49FB0E4, 0x17983F6A, 0x899895A6, + 0x258AB57F, 0xBB8A1FB3, 0x588D903D, 0xC68D3AF1, + 0xDF84FFFB, 0x41845537, 0xA283DAB9, 0x3C837075, + 0xDA853B53, 0x4485919F, 0xA7821E11, 0x3982B4DD, + 0x208B71D7, 0xBE8BDB1B, 0x5D8C5495, 0xC38CFE59, + 0x6F9EDE80, 0xF19E744C, 0x1299FBC2, 0x8C99510E, + 0x95909404, 0x0B903EC8, 0xE897B146, 0x76971B8A, + 0xF1B4802F, 0x6FB42AE3, 0x8CB3A56D, 0x12B30FA1, + 0x0BBACAAB, 0x95BA6067, 0x76BDEFE9, 0xE8BD4525, + 0x44AF65FC, 0xDAAFCF30, 0x39A840BE, 0xA7A8EA72, + 0xBEA12F78, 0x20A185B4, 0xC3A60A3A, 0x5DA6A0F6, + 0x8CE74DAA, 0x12E7E766, 0xF1E068E8, 0x6FE0C224, + 0x76E9072E, 0xE8E9ADE2, 0x0BEE226C, 0x95EE88A0, + 0x39FCA879, 0xA7FC02B5, 0x44FB8D3B, 0xDAFB27F7, + 0xC3F2E2FD, 0x5DF24831, 0xBEF5C7BF, 0x20F56D73, + 0xA7D6F6D6, 0x39D65C1A, 0xDAD1D394, 0x44D17958, + 0x5DD8BC52, 0xC3D8169E, 0x20DF9910, 0xBEDF33DC, + 0x12CD1305, 0x8CCDB9C9, 0x6FCA3647, 0xF1CA9C8B, + 0xE8C35981, 0x76C3F34D, 0x95C47CC3, 0x0BC4D60F, + 0x3747A67A, 0xA9470CB6, 0x4A408338, 0xD44029F4, + 0xCD49ECFE, 0x53494632, 0xB04EC9BC, 0x2E4E6370, + 0x825C43A9, 0x1C5CE965, 0xFF5B66EB, 0x615BCC27, + 0x7852092D, 0xE652A3E1, 0x05552C6F, 0x9B5586A3, + 0x1C761D06, 0x8276B7CA, 0x61713844, 0xFF719288, + 0xE6785782, 0x7878FD4E, 0x9B7F72C0, 0x057FD80C, + 0xA96DF8D5, 0x376D5219, 0xD46ADD97, 0x4A6A775B, + 0x5363B251, 0xCD63189D, 0x2E649713, 0xB0643DDF, + 0x6125D083, 0xFF257A4F, 0x1C22F5C1, 0x82225F0D, + 0x9B2B9A07, 0x052B30CB, 0xE62CBF45, 0x782C1589, + 0xD43E3550, 0x4A3E9F9C, 0xA9391012, 0x3739BADE, + 0x2E307FD4, 0xB030D518, 0x53375A96, 0xCD37F05A, + 0x4A146BFF, 0xD414C133, 0x37134EBD, 0xA913E471, + 0xB01A217B, 0x2E1A8BB7, 0xCD1D0439, 0x531DAEF5, + 0xFF0F8E2C, 0x610F24E0, 0x8208AB6E, 0x1C0801A2, + 0x0501C4A8, 0x9B016E64, 0x7806E1EA, 0xE6064B26 + } +}; diff --git a/src/liblzma/check/crc32_table_le.h b/src/liblzma/check/crc32_table_le.h new file mode 100644 index 0000000..25f4fc4 --- /dev/null +++ b/src/liblzma/check/crc32_table_le.h @@ -0,0 +1,525 @@ +/* This file has been automatically generated by crc32_tablegen.c. */ + +const uint32_t lzma_crc32_table[8][256] = { + { + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D + }, { + 0x00000000, 0x191B3141, 0x32366282, 0x2B2D53C3, + 0x646CC504, 0x7D77F445, 0x565AA786, 0x4F4196C7, + 0xC8D98A08, 0xD1C2BB49, 0xFAEFE88A, 0xE3F4D9CB, + 0xACB54F0C, 0xB5AE7E4D, 0x9E832D8E, 0x87981CCF, + 0x4AC21251, 0x53D92310, 0x78F470D3, 0x61EF4192, + 0x2EAED755, 0x37B5E614, 0x1C98B5D7, 0x05838496, + 0x821B9859, 0x9B00A918, 0xB02DFADB, 0xA936CB9A, + 0xE6775D5D, 0xFF6C6C1C, 0xD4413FDF, 0xCD5A0E9E, + 0x958424A2, 0x8C9F15E3, 0xA7B24620, 0xBEA97761, + 0xF1E8E1A6, 0xE8F3D0E7, 0xC3DE8324, 0xDAC5B265, + 0x5D5DAEAA, 0x44469FEB, 0x6F6BCC28, 0x7670FD69, + 0x39316BAE, 0x202A5AEF, 0x0B07092C, 0x121C386D, + 0xDF4636F3, 0xC65D07B2, 0xED705471, 0xF46B6530, + 0xBB2AF3F7, 0xA231C2B6, 0x891C9175, 0x9007A034, + 0x179FBCFB, 0x0E848DBA, 0x25A9DE79, 0x3CB2EF38, + 0x73F379FF, 0x6AE848BE, 0x41C51B7D, 0x58DE2A3C, + 0xF0794F05, 0xE9627E44, 0xC24F2D87, 0xDB541CC6, + 0x94158A01, 0x8D0EBB40, 0xA623E883, 0xBF38D9C2, + 0x38A0C50D, 0x21BBF44C, 0x0A96A78F, 0x138D96CE, + 0x5CCC0009, 0x45D73148, 0x6EFA628B, 0x77E153CA, + 0xBABB5D54, 0xA3A06C15, 0x888D3FD6, 0x91960E97, + 0xDED79850, 0xC7CCA911, 0xECE1FAD2, 0xF5FACB93, + 0x7262D75C, 0x6B79E61D, 0x4054B5DE, 0x594F849F, + 0x160E1258, 0x0F152319, 0x243870DA, 0x3D23419B, + 0x65FD6BA7, 0x7CE65AE6, 0x57CB0925, 0x4ED03864, + 0x0191AEA3, 0x188A9FE2, 0x33A7CC21, 0x2ABCFD60, + 0xAD24E1AF, 0xB43FD0EE, 0x9F12832D, 0x8609B26C, + 0xC94824AB, 0xD05315EA, 0xFB7E4629, 0xE2657768, + 0x2F3F79F6, 0x362448B7, 0x1D091B74, 0x04122A35, + 0x4B53BCF2, 0x52488DB3, 0x7965DE70, 0x607EEF31, + 0xE7E6F3FE, 0xFEFDC2BF, 0xD5D0917C, 0xCCCBA03D, + 0x838A36FA, 0x9A9107BB, 0xB1BC5478, 0xA8A76539, + 0x3B83984B, 0x2298A90A, 0x09B5FAC9, 0x10AECB88, + 0x5FEF5D4F, 0x46F46C0E, 0x6DD93FCD, 0x74C20E8C, + 0xF35A1243, 0xEA412302, 0xC16C70C1, 0xD8774180, + 0x9736D747, 0x8E2DE606, 0xA500B5C5, 0xBC1B8484, + 0x71418A1A, 0x685ABB5B, 0x4377E898, 0x5A6CD9D9, + 0x152D4F1E, 0x0C367E5F, 0x271B2D9C, 0x3E001CDD, + 0xB9980012, 0xA0833153, 0x8BAE6290, 0x92B553D1, + 0xDDF4C516, 0xC4EFF457, 0xEFC2A794, 0xF6D996D5, + 0xAE07BCE9, 0xB71C8DA8, 0x9C31DE6B, 0x852AEF2A, + 0xCA6B79ED, 0xD37048AC, 0xF85D1B6F, 0xE1462A2E, + 0x66DE36E1, 0x7FC507A0, 0x54E85463, 0x4DF36522, + 0x02B2F3E5, 0x1BA9C2A4, 0x30849167, 0x299FA026, + 0xE4C5AEB8, 0xFDDE9FF9, 0xD6F3CC3A, 0xCFE8FD7B, + 0x80A96BBC, 0x99B25AFD, 0xB29F093E, 0xAB84387F, + 0x2C1C24B0, 0x350715F1, 0x1E2A4632, 0x07317773, + 0x4870E1B4, 0x516BD0F5, 0x7A468336, 0x635DB277, + 0xCBFAD74E, 0xD2E1E60F, 0xF9CCB5CC, 0xE0D7848D, + 0xAF96124A, 0xB68D230B, 0x9DA070C8, 0x84BB4189, + 0x03235D46, 0x1A386C07, 0x31153FC4, 0x280E0E85, + 0x674F9842, 0x7E54A903, 0x5579FAC0, 0x4C62CB81, + 0x8138C51F, 0x9823F45E, 0xB30EA79D, 0xAA1596DC, + 0xE554001B, 0xFC4F315A, 0xD7626299, 0xCE7953D8, + 0x49E14F17, 0x50FA7E56, 0x7BD72D95, 0x62CC1CD4, + 0x2D8D8A13, 0x3496BB52, 0x1FBBE891, 0x06A0D9D0, + 0x5E7EF3EC, 0x4765C2AD, 0x6C48916E, 0x7553A02F, + 0x3A1236E8, 0x230907A9, 0x0824546A, 0x113F652B, + 0x96A779E4, 0x8FBC48A5, 0xA4911B66, 0xBD8A2A27, + 0xF2CBBCE0, 0xEBD08DA1, 0xC0FDDE62, 0xD9E6EF23, + 0x14BCE1BD, 0x0DA7D0FC, 0x268A833F, 0x3F91B27E, + 0x70D024B9, 0x69CB15F8, 0x42E6463B, 0x5BFD777A, + 0xDC656BB5, 0xC57E5AF4, 0xEE530937, 0xF7483876, + 0xB809AEB1, 0xA1129FF0, 0x8A3FCC33, 0x9324FD72 + }, { + 0x00000000, 0x01C26A37, 0x0384D46E, 0x0246BE59, + 0x0709A8DC, 0x06CBC2EB, 0x048D7CB2, 0x054F1685, + 0x0E1351B8, 0x0FD13B8F, 0x0D9785D6, 0x0C55EFE1, + 0x091AF964, 0x08D89353, 0x0A9E2D0A, 0x0B5C473D, + 0x1C26A370, 0x1DE4C947, 0x1FA2771E, 0x1E601D29, + 0x1B2F0BAC, 0x1AED619B, 0x18ABDFC2, 0x1969B5F5, + 0x1235F2C8, 0x13F798FF, 0x11B126A6, 0x10734C91, + 0x153C5A14, 0x14FE3023, 0x16B88E7A, 0x177AE44D, + 0x384D46E0, 0x398F2CD7, 0x3BC9928E, 0x3A0BF8B9, + 0x3F44EE3C, 0x3E86840B, 0x3CC03A52, 0x3D025065, + 0x365E1758, 0x379C7D6F, 0x35DAC336, 0x3418A901, + 0x3157BF84, 0x3095D5B3, 0x32D36BEA, 0x331101DD, + 0x246BE590, 0x25A98FA7, 0x27EF31FE, 0x262D5BC9, + 0x23624D4C, 0x22A0277B, 0x20E69922, 0x2124F315, + 0x2A78B428, 0x2BBADE1F, 0x29FC6046, 0x283E0A71, + 0x2D711CF4, 0x2CB376C3, 0x2EF5C89A, 0x2F37A2AD, + 0x709A8DC0, 0x7158E7F7, 0x731E59AE, 0x72DC3399, + 0x7793251C, 0x76514F2B, 0x7417F172, 0x75D59B45, + 0x7E89DC78, 0x7F4BB64F, 0x7D0D0816, 0x7CCF6221, + 0x798074A4, 0x78421E93, 0x7A04A0CA, 0x7BC6CAFD, + 0x6CBC2EB0, 0x6D7E4487, 0x6F38FADE, 0x6EFA90E9, + 0x6BB5866C, 0x6A77EC5B, 0x68315202, 0x69F33835, + 0x62AF7F08, 0x636D153F, 0x612BAB66, 0x60E9C151, + 0x65A6D7D4, 0x6464BDE3, 0x662203BA, 0x67E0698D, + 0x48D7CB20, 0x4915A117, 0x4B531F4E, 0x4A917579, + 0x4FDE63FC, 0x4E1C09CB, 0x4C5AB792, 0x4D98DDA5, + 0x46C49A98, 0x4706F0AF, 0x45404EF6, 0x448224C1, + 0x41CD3244, 0x400F5873, 0x4249E62A, 0x438B8C1D, + 0x54F16850, 0x55330267, 0x5775BC3E, 0x56B7D609, + 0x53F8C08C, 0x523AAABB, 0x507C14E2, 0x51BE7ED5, + 0x5AE239E8, 0x5B2053DF, 0x5966ED86, 0x58A487B1, + 0x5DEB9134, 0x5C29FB03, 0x5E6F455A, 0x5FAD2F6D, + 0xE1351B80, 0xE0F771B7, 0xE2B1CFEE, 0xE373A5D9, + 0xE63CB35C, 0xE7FED96B, 0xE5B86732, 0xE47A0D05, + 0xEF264A38, 0xEEE4200F, 0xECA29E56, 0xED60F461, + 0xE82FE2E4, 0xE9ED88D3, 0xEBAB368A, 0xEA695CBD, + 0xFD13B8F0, 0xFCD1D2C7, 0xFE976C9E, 0xFF5506A9, + 0xFA1A102C, 0xFBD87A1B, 0xF99EC442, 0xF85CAE75, + 0xF300E948, 0xF2C2837F, 0xF0843D26, 0xF1465711, + 0xF4094194, 0xF5CB2BA3, 0xF78D95FA, 0xF64FFFCD, + 0xD9785D60, 0xD8BA3757, 0xDAFC890E, 0xDB3EE339, + 0xDE71F5BC, 0xDFB39F8B, 0xDDF521D2, 0xDC374BE5, + 0xD76B0CD8, 0xD6A966EF, 0xD4EFD8B6, 0xD52DB281, + 0xD062A404, 0xD1A0CE33, 0xD3E6706A, 0xD2241A5D, + 0xC55EFE10, 0xC49C9427, 0xC6DA2A7E, 0xC7184049, + 0xC25756CC, 0xC3953CFB, 0xC1D382A2, 0xC011E895, + 0xCB4DAFA8, 0xCA8FC59F, 0xC8C97BC6, 0xC90B11F1, + 0xCC440774, 0xCD866D43, 0xCFC0D31A, 0xCE02B92D, + 0x91AF9640, 0x906DFC77, 0x922B422E, 0x93E92819, + 0x96A63E9C, 0x976454AB, 0x9522EAF2, 0x94E080C5, + 0x9FBCC7F8, 0x9E7EADCF, 0x9C381396, 0x9DFA79A1, + 0x98B56F24, 0x99770513, 0x9B31BB4A, 0x9AF3D17D, + 0x8D893530, 0x8C4B5F07, 0x8E0DE15E, 0x8FCF8B69, + 0x8A809DEC, 0x8B42F7DB, 0x89044982, 0x88C623B5, + 0x839A6488, 0x82580EBF, 0x801EB0E6, 0x81DCDAD1, + 0x8493CC54, 0x8551A663, 0x8717183A, 0x86D5720D, + 0xA9E2D0A0, 0xA820BA97, 0xAA6604CE, 0xABA46EF9, + 0xAEEB787C, 0xAF29124B, 0xAD6FAC12, 0xACADC625, + 0xA7F18118, 0xA633EB2F, 0xA4755576, 0xA5B73F41, + 0xA0F829C4, 0xA13A43F3, 0xA37CFDAA, 0xA2BE979D, + 0xB5C473D0, 0xB40619E7, 0xB640A7BE, 0xB782CD89, + 0xB2CDDB0C, 0xB30FB13B, 0xB1490F62, 0xB08B6555, + 0xBBD72268, 0xBA15485F, 0xB853F606, 0xB9919C31, + 0xBCDE8AB4, 0xBD1CE083, 0xBF5A5EDA, 0xBE9834ED + }, { + 0x00000000, 0xB8BC6765, 0xAA09C88B, 0x12B5AFEE, + 0x8F629757, 0x37DEF032, 0x256B5FDC, 0x9DD738B9, + 0xC5B428EF, 0x7D084F8A, 0x6FBDE064, 0xD7018701, + 0x4AD6BFB8, 0xF26AD8DD, 0xE0DF7733, 0x58631056, + 0x5019579F, 0xE8A530FA, 0xFA109F14, 0x42ACF871, + 0xDF7BC0C8, 0x67C7A7AD, 0x75720843, 0xCDCE6F26, + 0x95AD7F70, 0x2D111815, 0x3FA4B7FB, 0x8718D09E, + 0x1ACFE827, 0xA2738F42, 0xB0C620AC, 0x087A47C9, + 0xA032AF3E, 0x188EC85B, 0x0A3B67B5, 0xB28700D0, + 0x2F503869, 0x97EC5F0C, 0x8559F0E2, 0x3DE59787, + 0x658687D1, 0xDD3AE0B4, 0xCF8F4F5A, 0x7733283F, + 0xEAE41086, 0x525877E3, 0x40EDD80D, 0xF851BF68, + 0xF02BF8A1, 0x48979FC4, 0x5A22302A, 0xE29E574F, + 0x7F496FF6, 0xC7F50893, 0xD540A77D, 0x6DFCC018, + 0x359FD04E, 0x8D23B72B, 0x9F9618C5, 0x272A7FA0, + 0xBAFD4719, 0x0241207C, 0x10F48F92, 0xA848E8F7, + 0x9B14583D, 0x23A83F58, 0x311D90B6, 0x89A1F7D3, + 0x1476CF6A, 0xACCAA80F, 0xBE7F07E1, 0x06C36084, + 0x5EA070D2, 0xE61C17B7, 0xF4A9B859, 0x4C15DF3C, + 0xD1C2E785, 0x697E80E0, 0x7BCB2F0E, 0xC377486B, + 0xCB0D0FA2, 0x73B168C7, 0x6104C729, 0xD9B8A04C, + 0x446F98F5, 0xFCD3FF90, 0xEE66507E, 0x56DA371B, + 0x0EB9274D, 0xB6054028, 0xA4B0EFC6, 0x1C0C88A3, + 0x81DBB01A, 0x3967D77F, 0x2BD27891, 0x936E1FF4, + 0x3B26F703, 0x839A9066, 0x912F3F88, 0x299358ED, + 0xB4446054, 0x0CF80731, 0x1E4DA8DF, 0xA6F1CFBA, + 0xFE92DFEC, 0x462EB889, 0x549B1767, 0xEC277002, + 0x71F048BB, 0xC94C2FDE, 0xDBF98030, 0x6345E755, + 0x6B3FA09C, 0xD383C7F9, 0xC1366817, 0x798A0F72, + 0xE45D37CB, 0x5CE150AE, 0x4E54FF40, 0xF6E89825, + 0xAE8B8873, 0x1637EF16, 0x048240F8, 0xBC3E279D, + 0x21E91F24, 0x99557841, 0x8BE0D7AF, 0x335CB0CA, + 0xED59B63B, 0x55E5D15E, 0x47507EB0, 0xFFEC19D5, + 0x623B216C, 0xDA874609, 0xC832E9E7, 0x708E8E82, + 0x28ED9ED4, 0x9051F9B1, 0x82E4565F, 0x3A58313A, + 0xA78F0983, 0x1F336EE6, 0x0D86C108, 0xB53AA66D, + 0xBD40E1A4, 0x05FC86C1, 0x1749292F, 0xAFF54E4A, + 0x322276F3, 0x8A9E1196, 0x982BBE78, 0x2097D91D, + 0x78F4C94B, 0xC048AE2E, 0xD2FD01C0, 0x6A4166A5, + 0xF7965E1C, 0x4F2A3979, 0x5D9F9697, 0xE523F1F2, + 0x4D6B1905, 0xF5D77E60, 0xE762D18E, 0x5FDEB6EB, + 0xC2098E52, 0x7AB5E937, 0x680046D9, 0xD0BC21BC, + 0x88DF31EA, 0x3063568F, 0x22D6F961, 0x9A6A9E04, + 0x07BDA6BD, 0xBF01C1D8, 0xADB46E36, 0x15080953, + 0x1D724E9A, 0xA5CE29FF, 0xB77B8611, 0x0FC7E174, + 0x9210D9CD, 0x2AACBEA8, 0x38191146, 0x80A57623, + 0xD8C66675, 0x607A0110, 0x72CFAEFE, 0xCA73C99B, + 0x57A4F122, 0xEF189647, 0xFDAD39A9, 0x45115ECC, + 0x764DEE06, 0xCEF18963, 0xDC44268D, 0x64F841E8, + 0xF92F7951, 0x41931E34, 0x5326B1DA, 0xEB9AD6BF, + 0xB3F9C6E9, 0x0B45A18C, 0x19F00E62, 0xA14C6907, + 0x3C9B51BE, 0x842736DB, 0x96929935, 0x2E2EFE50, + 0x2654B999, 0x9EE8DEFC, 0x8C5D7112, 0x34E11677, + 0xA9362ECE, 0x118A49AB, 0x033FE645, 0xBB838120, + 0xE3E09176, 0x5B5CF613, 0x49E959FD, 0xF1553E98, + 0x6C820621, 0xD43E6144, 0xC68BCEAA, 0x7E37A9CF, + 0xD67F4138, 0x6EC3265D, 0x7C7689B3, 0xC4CAEED6, + 0x591DD66F, 0xE1A1B10A, 0xF3141EE4, 0x4BA87981, + 0x13CB69D7, 0xAB770EB2, 0xB9C2A15C, 0x017EC639, + 0x9CA9FE80, 0x241599E5, 0x36A0360B, 0x8E1C516E, + 0x866616A7, 0x3EDA71C2, 0x2C6FDE2C, 0x94D3B949, + 0x090481F0, 0xB1B8E695, 0xA30D497B, 0x1BB12E1E, + 0x43D23E48, 0xFB6E592D, 0xE9DBF6C3, 0x516791A6, + 0xCCB0A91F, 0x740CCE7A, 0x66B96194, 0xDE0506F1 + }, { + 0x00000000, 0x3D6029B0, 0x7AC05360, 0x47A07AD0, + 0xF580A6C0, 0xC8E08F70, 0x8F40F5A0, 0xB220DC10, + 0x30704BC1, 0x0D106271, 0x4AB018A1, 0x77D03111, + 0xC5F0ED01, 0xF890C4B1, 0xBF30BE61, 0x825097D1, + 0x60E09782, 0x5D80BE32, 0x1A20C4E2, 0x2740ED52, + 0x95603142, 0xA80018F2, 0xEFA06222, 0xD2C04B92, + 0x5090DC43, 0x6DF0F5F3, 0x2A508F23, 0x1730A693, + 0xA5107A83, 0x98705333, 0xDFD029E3, 0xE2B00053, + 0xC1C12F04, 0xFCA106B4, 0xBB017C64, 0x866155D4, + 0x344189C4, 0x0921A074, 0x4E81DAA4, 0x73E1F314, + 0xF1B164C5, 0xCCD14D75, 0x8B7137A5, 0xB6111E15, + 0x0431C205, 0x3951EBB5, 0x7EF19165, 0x4391B8D5, + 0xA121B886, 0x9C419136, 0xDBE1EBE6, 0xE681C256, + 0x54A11E46, 0x69C137F6, 0x2E614D26, 0x13016496, + 0x9151F347, 0xAC31DAF7, 0xEB91A027, 0xD6F18997, + 0x64D15587, 0x59B17C37, 0x1E1106E7, 0x23712F57, + 0x58F35849, 0x659371F9, 0x22330B29, 0x1F532299, + 0xAD73FE89, 0x9013D739, 0xD7B3ADE9, 0xEAD38459, + 0x68831388, 0x55E33A38, 0x124340E8, 0x2F236958, + 0x9D03B548, 0xA0639CF8, 0xE7C3E628, 0xDAA3CF98, + 0x3813CFCB, 0x0573E67B, 0x42D39CAB, 0x7FB3B51B, + 0xCD93690B, 0xF0F340BB, 0xB7533A6B, 0x8A3313DB, + 0x0863840A, 0x3503ADBA, 0x72A3D76A, 0x4FC3FEDA, + 0xFDE322CA, 0xC0830B7A, 0x872371AA, 0xBA43581A, + 0x9932774D, 0xA4525EFD, 0xE3F2242D, 0xDE920D9D, + 0x6CB2D18D, 0x51D2F83D, 0x167282ED, 0x2B12AB5D, + 0xA9423C8C, 0x9422153C, 0xD3826FEC, 0xEEE2465C, + 0x5CC29A4C, 0x61A2B3FC, 0x2602C92C, 0x1B62E09C, + 0xF9D2E0CF, 0xC4B2C97F, 0x8312B3AF, 0xBE729A1F, + 0x0C52460F, 0x31326FBF, 0x7692156F, 0x4BF23CDF, + 0xC9A2AB0E, 0xF4C282BE, 0xB362F86E, 0x8E02D1DE, + 0x3C220DCE, 0x0142247E, 0x46E25EAE, 0x7B82771E, + 0xB1E6B092, 0x8C869922, 0xCB26E3F2, 0xF646CA42, + 0x44661652, 0x79063FE2, 0x3EA64532, 0x03C66C82, + 0x8196FB53, 0xBCF6D2E3, 0xFB56A833, 0xC6368183, + 0x74165D93, 0x49767423, 0x0ED60EF3, 0x33B62743, + 0xD1062710, 0xEC660EA0, 0xABC67470, 0x96A65DC0, + 0x248681D0, 0x19E6A860, 0x5E46D2B0, 0x6326FB00, + 0xE1766CD1, 0xDC164561, 0x9BB63FB1, 0xA6D61601, + 0x14F6CA11, 0x2996E3A1, 0x6E369971, 0x5356B0C1, + 0x70279F96, 0x4D47B626, 0x0AE7CCF6, 0x3787E546, + 0x85A73956, 0xB8C710E6, 0xFF676A36, 0xC2074386, + 0x4057D457, 0x7D37FDE7, 0x3A978737, 0x07F7AE87, + 0xB5D77297, 0x88B75B27, 0xCF1721F7, 0xF2770847, + 0x10C70814, 0x2DA721A4, 0x6A075B74, 0x576772C4, + 0xE547AED4, 0xD8278764, 0x9F87FDB4, 0xA2E7D404, + 0x20B743D5, 0x1DD76A65, 0x5A7710B5, 0x67173905, + 0xD537E515, 0xE857CCA5, 0xAFF7B675, 0x92979FC5, + 0xE915E8DB, 0xD475C16B, 0x93D5BBBB, 0xAEB5920B, + 0x1C954E1B, 0x21F567AB, 0x66551D7B, 0x5B3534CB, + 0xD965A31A, 0xE4058AAA, 0xA3A5F07A, 0x9EC5D9CA, + 0x2CE505DA, 0x11852C6A, 0x562556BA, 0x6B457F0A, + 0x89F57F59, 0xB49556E9, 0xF3352C39, 0xCE550589, + 0x7C75D999, 0x4115F029, 0x06B58AF9, 0x3BD5A349, + 0xB9853498, 0x84E51D28, 0xC34567F8, 0xFE254E48, + 0x4C059258, 0x7165BBE8, 0x36C5C138, 0x0BA5E888, + 0x28D4C7DF, 0x15B4EE6F, 0x521494BF, 0x6F74BD0F, + 0xDD54611F, 0xE03448AF, 0xA794327F, 0x9AF41BCF, + 0x18A48C1E, 0x25C4A5AE, 0x6264DF7E, 0x5F04F6CE, + 0xED242ADE, 0xD044036E, 0x97E479BE, 0xAA84500E, + 0x4834505D, 0x755479ED, 0x32F4033D, 0x0F942A8D, + 0xBDB4F69D, 0x80D4DF2D, 0xC774A5FD, 0xFA148C4D, + 0x78441B9C, 0x4524322C, 0x028448FC, 0x3FE4614C, + 0x8DC4BD5C, 0xB0A494EC, 0xF704EE3C, 0xCA64C78C + }, { + 0x00000000, 0xCB5CD3A5, 0x4DC8A10B, 0x869472AE, + 0x9B914216, 0x50CD91B3, 0xD659E31D, 0x1D0530B8, + 0xEC53826D, 0x270F51C8, 0xA19B2366, 0x6AC7F0C3, + 0x77C2C07B, 0xBC9E13DE, 0x3A0A6170, 0xF156B2D5, + 0x03D6029B, 0xC88AD13E, 0x4E1EA390, 0x85427035, + 0x9847408D, 0x531B9328, 0xD58FE186, 0x1ED33223, + 0xEF8580F6, 0x24D95353, 0xA24D21FD, 0x6911F258, + 0x7414C2E0, 0xBF481145, 0x39DC63EB, 0xF280B04E, + 0x07AC0536, 0xCCF0D693, 0x4A64A43D, 0x81387798, + 0x9C3D4720, 0x57619485, 0xD1F5E62B, 0x1AA9358E, + 0xEBFF875B, 0x20A354FE, 0xA6372650, 0x6D6BF5F5, + 0x706EC54D, 0xBB3216E8, 0x3DA66446, 0xF6FAB7E3, + 0x047A07AD, 0xCF26D408, 0x49B2A6A6, 0x82EE7503, + 0x9FEB45BB, 0x54B7961E, 0xD223E4B0, 0x197F3715, + 0xE82985C0, 0x23755665, 0xA5E124CB, 0x6EBDF76E, + 0x73B8C7D6, 0xB8E41473, 0x3E7066DD, 0xF52CB578, + 0x0F580A6C, 0xC404D9C9, 0x4290AB67, 0x89CC78C2, + 0x94C9487A, 0x5F959BDF, 0xD901E971, 0x125D3AD4, + 0xE30B8801, 0x28575BA4, 0xAEC3290A, 0x659FFAAF, + 0x789ACA17, 0xB3C619B2, 0x35526B1C, 0xFE0EB8B9, + 0x0C8E08F7, 0xC7D2DB52, 0x4146A9FC, 0x8A1A7A59, + 0x971F4AE1, 0x5C439944, 0xDAD7EBEA, 0x118B384F, + 0xE0DD8A9A, 0x2B81593F, 0xAD152B91, 0x6649F834, + 0x7B4CC88C, 0xB0101B29, 0x36846987, 0xFDD8BA22, + 0x08F40F5A, 0xC3A8DCFF, 0x453CAE51, 0x8E607DF4, + 0x93654D4C, 0x58399EE9, 0xDEADEC47, 0x15F13FE2, + 0xE4A78D37, 0x2FFB5E92, 0xA96F2C3C, 0x6233FF99, + 0x7F36CF21, 0xB46A1C84, 0x32FE6E2A, 0xF9A2BD8F, + 0x0B220DC1, 0xC07EDE64, 0x46EAACCA, 0x8DB67F6F, + 0x90B34FD7, 0x5BEF9C72, 0xDD7BEEDC, 0x16273D79, + 0xE7718FAC, 0x2C2D5C09, 0xAAB92EA7, 0x61E5FD02, + 0x7CE0CDBA, 0xB7BC1E1F, 0x31286CB1, 0xFA74BF14, + 0x1EB014D8, 0xD5ECC77D, 0x5378B5D3, 0x98246676, + 0x852156CE, 0x4E7D856B, 0xC8E9F7C5, 0x03B52460, + 0xF2E396B5, 0x39BF4510, 0xBF2B37BE, 0x7477E41B, + 0x6972D4A3, 0xA22E0706, 0x24BA75A8, 0xEFE6A60D, + 0x1D661643, 0xD63AC5E6, 0x50AEB748, 0x9BF264ED, + 0x86F75455, 0x4DAB87F0, 0xCB3FF55E, 0x006326FB, + 0xF135942E, 0x3A69478B, 0xBCFD3525, 0x77A1E680, + 0x6AA4D638, 0xA1F8059D, 0x276C7733, 0xEC30A496, + 0x191C11EE, 0xD240C24B, 0x54D4B0E5, 0x9F886340, + 0x828D53F8, 0x49D1805D, 0xCF45F2F3, 0x04192156, + 0xF54F9383, 0x3E134026, 0xB8873288, 0x73DBE12D, + 0x6EDED195, 0xA5820230, 0x2316709E, 0xE84AA33B, + 0x1ACA1375, 0xD196C0D0, 0x5702B27E, 0x9C5E61DB, + 0x815B5163, 0x4A0782C6, 0xCC93F068, 0x07CF23CD, + 0xF6999118, 0x3DC542BD, 0xBB513013, 0x700DE3B6, + 0x6D08D30E, 0xA65400AB, 0x20C07205, 0xEB9CA1A0, + 0x11E81EB4, 0xDAB4CD11, 0x5C20BFBF, 0x977C6C1A, + 0x8A795CA2, 0x41258F07, 0xC7B1FDA9, 0x0CED2E0C, + 0xFDBB9CD9, 0x36E74F7C, 0xB0733DD2, 0x7B2FEE77, + 0x662ADECF, 0xAD760D6A, 0x2BE27FC4, 0xE0BEAC61, + 0x123E1C2F, 0xD962CF8A, 0x5FF6BD24, 0x94AA6E81, + 0x89AF5E39, 0x42F38D9C, 0xC467FF32, 0x0F3B2C97, + 0xFE6D9E42, 0x35314DE7, 0xB3A53F49, 0x78F9ECEC, + 0x65FCDC54, 0xAEA00FF1, 0x28347D5F, 0xE368AEFA, + 0x16441B82, 0xDD18C827, 0x5B8CBA89, 0x90D0692C, + 0x8DD55994, 0x46898A31, 0xC01DF89F, 0x0B412B3A, + 0xFA1799EF, 0x314B4A4A, 0xB7DF38E4, 0x7C83EB41, + 0x6186DBF9, 0xAADA085C, 0x2C4E7AF2, 0xE712A957, + 0x15921919, 0xDECECABC, 0x585AB812, 0x93066BB7, + 0x8E035B0F, 0x455F88AA, 0xC3CBFA04, 0x089729A1, + 0xF9C19B74, 0x329D48D1, 0xB4093A7F, 0x7F55E9DA, + 0x6250D962, 0xA90C0AC7, 0x2F987869, 0xE4C4ABCC + }, { + 0x00000000, 0xA6770BB4, 0x979F1129, 0x31E81A9D, + 0xF44F2413, 0x52382FA7, 0x63D0353A, 0xC5A73E8E, + 0x33EF4E67, 0x959845D3, 0xA4705F4E, 0x020754FA, + 0xC7A06A74, 0x61D761C0, 0x503F7B5D, 0xF64870E9, + 0x67DE9CCE, 0xC1A9977A, 0xF0418DE7, 0x56368653, + 0x9391B8DD, 0x35E6B369, 0x040EA9F4, 0xA279A240, + 0x5431D2A9, 0xF246D91D, 0xC3AEC380, 0x65D9C834, + 0xA07EF6BA, 0x0609FD0E, 0x37E1E793, 0x9196EC27, + 0xCFBD399C, 0x69CA3228, 0x582228B5, 0xFE552301, + 0x3BF21D8F, 0x9D85163B, 0xAC6D0CA6, 0x0A1A0712, + 0xFC5277FB, 0x5A257C4F, 0x6BCD66D2, 0xCDBA6D66, + 0x081D53E8, 0xAE6A585C, 0x9F8242C1, 0x39F54975, + 0xA863A552, 0x0E14AEE6, 0x3FFCB47B, 0x998BBFCF, + 0x5C2C8141, 0xFA5B8AF5, 0xCBB39068, 0x6DC49BDC, + 0x9B8CEB35, 0x3DFBE081, 0x0C13FA1C, 0xAA64F1A8, + 0x6FC3CF26, 0xC9B4C492, 0xF85CDE0F, 0x5E2BD5BB, + 0x440B7579, 0xE27C7ECD, 0xD3946450, 0x75E36FE4, + 0xB044516A, 0x16335ADE, 0x27DB4043, 0x81AC4BF7, + 0x77E43B1E, 0xD19330AA, 0xE07B2A37, 0x460C2183, + 0x83AB1F0D, 0x25DC14B9, 0x14340E24, 0xB2430590, + 0x23D5E9B7, 0x85A2E203, 0xB44AF89E, 0x123DF32A, + 0xD79ACDA4, 0x71EDC610, 0x4005DC8D, 0xE672D739, + 0x103AA7D0, 0xB64DAC64, 0x87A5B6F9, 0x21D2BD4D, + 0xE47583C3, 0x42028877, 0x73EA92EA, 0xD59D995E, + 0x8BB64CE5, 0x2DC14751, 0x1C295DCC, 0xBA5E5678, + 0x7FF968F6, 0xD98E6342, 0xE86679DF, 0x4E11726B, + 0xB8590282, 0x1E2E0936, 0x2FC613AB, 0x89B1181F, + 0x4C162691, 0xEA612D25, 0xDB8937B8, 0x7DFE3C0C, + 0xEC68D02B, 0x4A1FDB9F, 0x7BF7C102, 0xDD80CAB6, + 0x1827F438, 0xBE50FF8C, 0x8FB8E511, 0x29CFEEA5, + 0xDF879E4C, 0x79F095F8, 0x48188F65, 0xEE6F84D1, + 0x2BC8BA5F, 0x8DBFB1EB, 0xBC57AB76, 0x1A20A0C2, + 0x8816EAF2, 0x2E61E146, 0x1F89FBDB, 0xB9FEF06F, + 0x7C59CEE1, 0xDA2EC555, 0xEBC6DFC8, 0x4DB1D47C, + 0xBBF9A495, 0x1D8EAF21, 0x2C66B5BC, 0x8A11BE08, + 0x4FB68086, 0xE9C18B32, 0xD82991AF, 0x7E5E9A1B, + 0xEFC8763C, 0x49BF7D88, 0x78576715, 0xDE206CA1, + 0x1B87522F, 0xBDF0599B, 0x8C184306, 0x2A6F48B2, + 0xDC27385B, 0x7A5033EF, 0x4BB82972, 0xEDCF22C6, + 0x28681C48, 0x8E1F17FC, 0xBFF70D61, 0x198006D5, + 0x47ABD36E, 0xE1DCD8DA, 0xD034C247, 0x7643C9F3, + 0xB3E4F77D, 0x1593FCC9, 0x247BE654, 0x820CEDE0, + 0x74449D09, 0xD23396BD, 0xE3DB8C20, 0x45AC8794, + 0x800BB91A, 0x267CB2AE, 0x1794A833, 0xB1E3A387, + 0x20754FA0, 0x86024414, 0xB7EA5E89, 0x119D553D, + 0xD43A6BB3, 0x724D6007, 0x43A57A9A, 0xE5D2712E, + 0x139A01C7, 0xB5ED0A73, 0x840510EE, 0x22721B5A, + 0xE7D525D4, 0x41A22E60, 0x704A34FD, 0xD63D3F49, + 0xCC1D9F8B, 0x6A6A943F, 0x5B828EA2, 0xFDF58516, + 0x3852BB98, 0x9E25B02C, 0xAFCDAAB1, 0x09BAA105, + 0xFFF2D1EC, 0x5985DA58, 0x686DC0C5, 0xCE1ACB71, + 0x0BBDF5FF, 0xADCAFE4B, 0x9C22E4D6, 0x3A55EF62, + 0xABC30345, 0x0DB408F1, 0x3C5C126C, 0x9A2B19D8, + 0x5F8C2756, 0xF9FB2CE2, 0xC813367F, 0x6E643DCB, + 0x982C4D22, 0x3E5B4696, 0x0FB35C0B, 0xA9C457BF, + 0x6C636931, 0xCA146285, 0xFBFC7818, 0x5D8B73AC, + 0x03A0A617, 0xA5D7ADA3, 0x943FB73E, 0x3248BC8A, + 0xF7EF8204, 0x519889B0, 0x6070932D, 0xC6079899, + 0x304FE870, 0x9638E3C4, 0xA7D0F959, 0x01A7F2ED, + 0xC400CC63, 0x6277C7D7, 0x539FDD4A, 0xF5E8D6FE, + 0x647E3AD9, 0xC209316D, 0xF3E12BF0, 0x55962044, + 0x90311ECA, 0x3646157E, 0x07AE0FE3, 0xA1D90457, + 0x579174BE, 0xF1E67F0A, 0xC00E6597, 0x66796E23, + 0xA3DE50AD, 0x05A95B19, 0x34414184, 0x92364A30 + }, { + 0x00000000, 0xCCAA009E, 0x4225077D, 0x8E8F07E3, + 0x844A0EFA, 0x48E00E64, 0xC66F0987, 0x0AC50919, + 0xD3E51BB5, 0x1F4F1B2B, 0x91C01CC8, 0x5D6A1C56, + 0x57AF154F, 0x9B0515D1, 0x158A1232, 0xD92012AC, + 0x7CBB312B, 0xB01131B5, 0x3E9E3656, 0xF23436C8, + 0xF8F13FD1, 0x345B3F4F, 0xBAD438AC, 0x767E3832, + 0xAF5E2A9E, 0x63F42A00, 0xED7B2DE3, 0x21D12D7D, + 0x2B142464, 0xE7BE24FA, 0x69312319, 0xA59B2387, + 0xF9766256, 0x35DC62C8, 0xBB53652B, 0x77F965B5, + 0x7D3C6CAC, 0xB1966C32, 0x3F196BD1, 0xF3B36B4F, + 0x2A9379E3, 0xE639797D, 0x68B67E9E, 0xA41C7E00, + 0xAED97719, 0x62737787, 0xECFC7064, 0x205670FA, + 0x85CD537D, 0x496753E3, 0xC7E85400, 0x0B42549E, + 0x01875D87, 0xCD2D5D19, 0x43A25AFA, 0x8F085A64, + 0x562848C8, 0x9A824856, 0x140D4FB5, 0xD8A74F2B, + 0xD2624632, 0x1EC846AC, 0x9047414F, 0x5CED41D1, + 0x299DC2ED, 0xE537C273, 0x6BB8C590, 0xA712C50E, + 0xADD7CC17, 0x617DCC89, 0xEFF2CB6A, 0x2358CBF4, + 0xFA78D958, 0x36D2D9C6, 0xB85DDE25, 0x74F7DEBB, + 0x7E32D7A2, 0xB298D73C, 0x3C17D0DF, 0xF0BDD041, + 0x5526F3C6, 0x998CF358, 0x1703F4BB, 0xDBA9F425, + 0xD16CFD3C, 0x1DC6FDA2, 0x9349FA41, 0x5FE3FADF, + 0x86C3E873, 0x4A69E8ED, 0xC4E6EF0E, 0x084CEF90, + 0x0289E689, 0xCE23E617, 0x40ACE1F4, 0x8C06E16A, + 0xD0EBA0BB, 0x1C41A025, 0x92CEA7C6, 0x5E64A758, + 0x54A1AE41, 0x980BAEDF, 0x1684A93C, 0xDA2EA9A2, + 0x030EBB0E, 0xCFA4BB90, 0x412BBC73, 0x8D81BCED, + 0x8744B5F4, 0x4BEEB56A, 0xC561B289, 0x09CBB217, + 0xAC509190, 0x60FA910E, 0xEE7596ED, 0x22DF9673, + 0x281A9F6A, 0xE4B09FF4, 0x6A3F9817, 0xA6959889, + 0x7FB58A25, 0xB31F8ABB, 0x3D908D58, 0xF13A8DC6, + 0xFBFF84DF, 0x37558441, 0xB9DA83A2, 0x7570833C, + 0x533B85DA, 0x9F918544, 0x111E82A7, 0xDDB48239, + 0xD7718B20, 0x1BDB8BBE, 0x95548C5D, 0x59FE8CC3, + 0x80DE9E6F, 0x4C749EF1, 0xC2FB9912, 0x0E51998C, + 0x04949095, 0xC83E900B, 0x46B197E8, 0x8A1B9776, + 0x2F80B4F1, 0xE32AB46F, 0x6DA5B38C, 0xA10FB312, + 0xABCABA0B, 0x6760BA95, 0xE9EFBD76, 0x2545BDE8, + 0xFC65AF44, 0x30CFAFDA, 0xBE40A839, 0x72EAA8A7, + 0x782FA1BE, 0xB485A120, 0x3A0AA6C3, 0xF6A0A65D, + 0xAA4DE78C, 0x66E7E712, 0xE868E0F1, 0x24C2E06F, + 0x2E07E976, 0xE2ADE9E8, 0x6C22EE0B, 0xA088EE95, + 0x79A8FC39, 0xB502FCA7, 0x3B8DFB44, 0xF727FBDA, + 0xFDE2F2C3, 0x3148F25D, 0xBFC7F5BE, 0x736DF520, + 0xD6F6D6A7, 0x1A5CD639, 0x94D3D1DA, 0x5879D144, + 0x52BCD85D, 0x9E16D8C3, 0x1099DF20, 0xDC33DFBE, + 0x0513CD12, 0xC9B9CD8C, 0x4736CA6F, 0x8B9CCAF1, + 0x8159C3E8, 0x4DF3C376, 0xC37CC495, 0x0FD6C40B, + 0x7AA64737, 0xB60C47A9, 0x3883404A, 0xF42940D4, + 0xFEEC49CD, 0x32464953, 0xBCC94EB0, 0x70634E2E, + 0xA9435C82, 0x65E95C1C, 0xEB665BFF, 0x27CC5B61, + 0x2D095278, 0xE1A352E6, 0x6F2C5505, 0xA386559B, + 0x061D761C, 0xCAB77682, 0x44387161, 0x889271FF, + 0x825778E6, 0x4EFD7878, 0xC0727F9B, 0x0CD87F05, + 0xD5F86DA9, 0x19526D37, 0x97DD6AD4, 0x5B776A4A, + 0x51B26353, 0x9D1863CD, 0x1397642E, 0xDF3D64B0, + 0x83D02561, 0x4F7A25FF, 0xC1F5221C, 0x0D5F2282, + 0x079A2B9B, 0xCB302B05, 0x45BF2CE6, 0x89152C78, + 0x50353ED4, 0x9C9F3E4A, 0x121039A9, 0xDEBA3937, + 0xD47F302E, 0x18D530B0, 0x965A3753, 0x5AF037CD, + 0xFF6B144A, 0x33C114D4, 0xBD4E1337, 0x71E413A9, + 0x7B211AB0, 0xB78B1A2E, 0x39041DCD, 0xF5AE1D53, + 0x2C8E0FFF, 0xE0240F61, 0x6EAB0882, 0xA201081C, + 0xA8C40105, 0x646E019B, 0xEAE10678, 0x264B06E6 + } +}; diff --git a/src/liblzma/check/crc32_tablegen.c b/src/liblzma/check/crc32_tablegen.c new file mode 100644 index 0000000..31a4d27 --- /dev/null +++ b/src/liblzma/check/crc32_tablegen.c @@ -0,0 +1,117 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc32_tablegen.c +/// \brief Generate crc32_table_le.h and crc32_table_be.h +/// +/// Compiling: gcc -std=c99 -o crc32_tablegen crc32_tablegen.c +/// Add -DWORDS_BIGENDIAN to generate big endian table. +/// Add -DLZ_HASH_TABLE to generate lz_encoder_hash_table.h (little endian). +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include +#include "../../common/tuklib_integer.h" + + +static uint32_t crc32_table[8][256]; + + +static void +init_crc32_table(void) +{ + static const uint32_t poly32 = UINT32_C(0xEDB88320); + + for (size_t s = 0; s < 8; ++s) { + for (size_t b = 0; b < 256; ++b) { + uint32_t r = s == 0 ? b : crc32_table[s - 1][b]; + + for (size_t i = 0; i < 8; ++i) { + if (r & 1) + r = (r >> 1) ^ poly32; + else + r >>= 1; + } + + crc32_table[s][b] = r; + } + } + +#ifdef WORDS_BIGENDIAN + for (size_t s = 0; s < 8; ++s) + for (size_t b = 0; b < 256; ++b) + crc32_table[s][b] = bswap32(crc32_table[s][b]); +#endif + + return; +} + + +static void +print_crc32_table(void) +{ + printf("/* This file has been automatically generated by " + "crc32_tablegen.c. */\n\n" + "const uint32_t lzma_crc32_table[8][256] = {\n\t{"); + + for (size_t s = 0; s < 8; ++s) { + for (size_t b = 0; b < 256; ++b) { + if ((b % 4) == 0) + printf("\n\t\t"); + + printf("0x%08" PRIX32, crc32_table[s][b]); + + if (b != 255) + printf(",%s", (b+1) % 4 == 0 ? "" : " "); + } + + if (s == 7) + printf("\n\t}\n};\n"); + else + printf("\n\t}, {"); + } + + return; +} + + +static void +print_lz_table(void) +{ + printf("/* This file has been automatically generated by " + "crc32_tablegen.c. */\n\n" + "const uint32_t lzma_lz_hash_table[256] = {"); + + for (size_t b = 0; b < 256; ++b) { + if ((b % 4) == 0) + printf("\n\t"); + + printf("0x%08" PRIX32, crc32_table[0][b]); + + if (b != 255) + printf(",%s", (b+1) % 4 == 0 ? "" : " "); + } + + printf("\n};\n"); + + return; +} + + +int +main(void) +{ + init_crc32_table(); + +#ifdef LZ_HASH_TABLE + print_lz_table(); +#else + print_crc32_table(); +#endif + + return 0; +} diff --git a/src/liblzma/check/crc32_x86.S b/src/liblzma/check/crc32_x86.S new file mode 100644 index 0000000..4f395df --- /dev/null +++ b/src/liblzma/check/crc32_x86.S @@ -0,0 +1,313 @@ +/* + * Speed-optimized CRC32 using slicing-by-eight algorithm + * + * This uses only i386 instructions, but it is optimized for i686 and later + * (including e.g. Pentium II/III/IV, Athlon XP, and Core 2). For i586 + * (e.g. Pentium), slicing-by-four would be better, and even the C version + * of slicing-by-eight built with gcc -march=i586 tends to be a little bit + * better than this. Very few probably run this code on i586 or older x86 + * so this shouldn't be a problem in practice. + * + * Authors: Igor Pavlov (original version) + * Lasse Collin (AT&T syntax, PIC support, better portability) + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * This code needs lzma_crc32_table, which can be created using the + * following C code: + +uint32_t lzma_crc32_table[8][256]; + +void +init_table(void) +{ + // IEEE-802.3 + static const uint32_t poly32 = UINT32_C(0xEDB88320); + + // Castagnoli + // static const uint32_t poly32 = UINT32_C(0x82F63B78); + + // Koopman + // static const uint32_t poly32 = UINT32_C(0xEB31D82E); + + for (size_t s = 0; s < 8; ++s) { + for (size_t b = 0; b < 256; ++b) { + uint32_t r = s == 0 ? b : lzma_crc32_table[s - 1][b]; + + for (size_t i = 0; i < 8; ++i) { + if (r & 1) + r = (r >> 1) ^ poly32; + else + r >>= 1; + } + + lzma_crc32_table[s][b] = r; + } + } +} + + * The prototype of the CRC32 function: + * extern uint32_t lzma_crc32(const uint8_t *buf, size_t size, uint32_t crc); + */ + +/* When Intel CET is enabled, include in assembly code to mark + Intel CET support. */ +#ifdef __CET__ +# include +#else +# define _CET_ENDBR +#endif + +/* + * On some systems, the functions need to be prefixed. The prefix is + * usually an underscore. + */ +#ifndef __USER_LABEL_PREFIX__ +# define __USER_LABEL_PREFIX__ +#endif +#define MAKE_SYM_CAT(prefix, sym) prefix ## sym +#define MAKE_SYM(prefix, sym) MAKE_SYM_CAT(prefix, sym) +#define LZMA_CRC32 MAKE_SYM(__USER_LABEL_PREFIX__, lzma_crc32) +#define LZMA_CRC32_TABLE MAKE_SYM(__USER_LABEL_PREFIX__, lzma_crc32_table) + +/* + * Solaris assembler doesn't have .p2align, and Darwin uses .align + * differently than GNU/Linux and Solaris. + */ +#if defined(__APPLE__) || defined(__MSDOS__) +# define ALIGN(pow2, abs) .align pow2 +#else +# define ALIGN(pow2, abs) .align abs +#endif + + .text + .globl LZMA_CRC32 + +#if !defined(__APPLE__) && !defined(_WIN32) && !defined(__CYGWIN__) \ + && !defined(__MSDOS__) + .type LZMA_CRC32, @function +#endif + + ALIGN(4, 16) +LZMA_CRC32: + _CET_ENDBR + /* + * Register usage: + * %eax crc + * %esi buf + * %edi size or buf + size + * %ebx lzma_crc32_table + * %ebp Table index + * %ecx Temporary + * %edx Temporary + */ + pushl %ebx + pushl %esi + pushl %edi + pushl %ebp + movl 0x14(%esp), %esi /* buf */ + movl 0x18(%esp), %edi /* size */ + movl 0x1C(%esp), %eax /* crc */ + + /* + * Store the address of lzma_crc32_table to %ebx. This is needed to + * get position-independent code (PIC). + * + * The PIC macro is defined by libtool, while __PIC__ is defined + * by GCC but only on some systems. Testing for both makes it simpler + * to test this code without libtool, and keeps the code working also + * when built with libtool but using something else than GCC. + * + * I understood that libtool may define PIC on Windows even though + * the code in Windows DLLs is not PIC in sense that it is in ELF + * binaries, so we need a separate check to always use the non-PIC + * code on Windows. + */ +#if (!defined(PIC) && !defined(__PIC__)) \ + || (defined(_WIN32) || defined(__CYGWIN__)) + /* Not PIC */ + movl $ LZMA_CRC32_TABLE, %ebx +#elif defined(__APPLE__) + /* Mach-O */ + call .L_get_pc +.L_pic: + leal .L_lzma_crc32_table$non_lazy_ptr-.L_pic(%ebx), %ebx + movl (%ebx), %ebx +#else + /* ELF */ + call .L_get_pc + addl $_GLOBAL_OFFSET_TABLE_, %ebx + movl LZMA_CRC32_TABLE@GOT(%ebx), %ebx +#endif + + /* Complement the initial value. */ + notl %eax + + ALIGN(4, 16) +.L_align: + /* + * Check if there is enough input to use slicing-by-eight. + * We need 16 bytes, because the loop pre-reads eight bytes. + */ + cmpl $16, %edi + jb .L_rest + + /* Check if we have reached alignment of eight bytes. */ + testl $7, %esi + jz .L_slice + + /* Calculate CRC of the next input byte. */ + movzbl (%esi), %ebp + incl %esi + movzbl %al, %ecx + xorl %ecx, %ebp + shrl $8, %eax + xorl (%ebx, %ebp, 4), %eax + decl %edi + jmp .L_align + + ALIGN(2, 4) +.L_slice: + /* + * If we get here, there's at least 16 bytes of aligned input + * available. Make %edi multiple of eight bytes. Store the possible + * remainder over the "size" variable in the argument stack. + */ + movl %edi, 0x18(%esp) + andl $-8, %edi + subl %edi, 0x18(%esp) + + /* + * Let %edi be buf + size - 8 while running the main loop. This way + * we can compare for equality to determine when exit the loop. + */ + addl %esi, %edi + subl $8, %edi + + /* Read in the first eight aligned bytes. */ + xorl (%esi), %eax + movl 4(%esi), %ecx + movzbl %cl, %ebp + +.L_loop: + movl 0x0C00(%ebx, %ebp, 4), %edx + movzbl %ch, %ebp + xorl 0x0800(%ebx, %ebp, 4), %edx + shrl $16, %ecx + xorl 8(%esi), %edx + movzbl %cl, %ebp + xorl 0x0400(%ebx, %ebp, 4), %edx + movzbl %ch, %ebp + xorl (%ebx, %ebp, 4), %edx + movzbl %al, %ebp + + /* + * Read the next four bytes, for which the CRC is calculated + * on the next iteration of the loop. + */ + movl 12(%esi), %ecx + + xorl 0x1C00(%ebx, %ebp, 4), %edx + movzbl %ah, %ebp + shrl $16, %eax + xorl 0x1800(%ebx, %ebp, 4), %edx + movzbl %ah, %ebp + movzbl %al, %eax + movl 0x1400(%ebx, %eax, 4), %eax + addl $8, %esi + xorl %edx, %eax + xorl 0x1000(%ebx, %ebp, 4), %eax + + /* Check for end of aligned input. */ + cmpl %edi, %esi + movzbl %cl, %ebp + jne .L_loop + + /* + * Process the remaining eight bytes, which we have already + * copied to %ecx and %edx. + */ + movl 0x0C00(%ebx, %ebp, 4), %edx + movzbl %ch, %ebp + xorl 0x0800(%ebx, %ebp, 4), %edx + shrl $16, %ecx + movzbl %cl, %ebp + xorl 0x0400(%ebx, %ebp, 4), %edx + movzbl %ch, %ebp + xorl (%ebx, %ebp, 4), %edx + movzbl %al, %ebp + + xorl 0x1C00(%ebx, %ebp, 4), %edx + movzbl %ah, %ebp + shrl $16, %eax + xorl 0x1800(%ebx, %ebp, 4), %edx + movzbl %ah, %ebp + movzbl %al, %eax + movl 0x1400(%ebx, %eax, 4), %eax + addl $8, %esi + xorl %edx, %eax + xorl 0x1000(%ebx, %ebp, 4), %eax + + /* Copy the number of remaining bytes to %edi. */ + movl 0x18(%esp), %edi + +.L_rest: + /* Check for end of input. */ + testl %edi, %edi + jz .L_return + + /* Calculate CRC of the next input byte. */ + movzbl (%esi), %ebp + incl %esi + movzbl %al, %ecx + xorl %ecx, %ebp + shrl $8, %eax + xorl (%ebx, %ebp, 4), %eax + decl %edi + jmp .L_rest + +.L_return: + /* Complement the final value. */ + notl %eax + + popl %ebp + popl %edi + popl %esi + popl %ebx + ret + +#if defined(PIC) || defined(__PIC__) + ALIGN(4, 16) +.L_get_pc: + movl (%esp), %ebx + ret +#endif + +#if defined(__APPLE__) && (defined(PIC) || defined(__PIC__)) + /* Mach-O PIC */ + .section __IMPORT,__pointers,non_lazy_symbol_pointers +.L_lzma_crc32_table$non_lazy_ptr: + .indirect_symbol LZMA_CRC32_TABLE + .long 0 + +#elif defined(_WIN32) || defined(__CYGWIN__) +# ifdef DLL_EXPORT + /* This is equivalent of __declspec(dllexport). */ + .section .drectve + .ascii " -export:lzma_crc32" +# endif + +#elif !defined(__MSDOS__) + /* ELF */ + .size LZMA_CRC32, .-LZMA_CRC32 +#endif + +/* + * This is needed to support non-executable stack. It's ugly to + * use __FreeBSD__ and __linux__ here, but I don't know a way to detect when + * we are using GNU assembler. + */ +#if defined(__ELF__) && (defined(__FreeBSD__) || defined(__linux__)) + .section .note.GNU-stack,"",@progbits +#endif diff --git a/src/liblzma/check/crc64_fast.c b/src/liblzma/check/crc64_fast.c new file mode 100644 index 0000000..db44633 --- /dev/null +++ b/src/liblzma/check/crc64_fast.c @@ -0,0 +1,530 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc64.c +/// \brief CRC64 calculation +/// +/// There are two methods in this file. crc64_generic uses the +/// the slice-by-four algorithm. This is the same idea that is +/// used in crc32_fast.c, but for CRC64 we use only four tables +/// instead of eight to avoid increasing CPU cache usage. +/// +/// crc64_clmul uses 32/64-bit x86 SSSE3, SSE4.1, and CLMUL instructions. +/// It was derived from +/// https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf +/// and the public domain code from https://github.com/rawrunprotected/crc +/// (URLs were checked on 2022-11-07). +/// +/// FIXME: Builds for 32-bit x86 use crc64_x86.S by default instead +/// of this file and thus CLMUL version isn't available on 32-bit x86 +/// unless configured with --disable-assembler. Even then the lookup table +/// isn't omitted in crc64_table.c since it doesn't know that assembly +/// code has been disabled. +// +// Authors: Lasse Collin +// Ilya Kurdyukov +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "check.h" + +#undef CRC_GENERIC +#undef CRC_CLMUL +#undef CRC_USE_GENERIC_FOR_SMALL_INPUTS + +// If CLMUL cannot be used then only the generic slice-by-four is built. +#if !defined(HAVE_USABLE_CLMUL) +# define CRC_GENERIC 1 + +// If CLMUL is allowed unconditionally in the compiler options then the +// generic version can be omitted. Note that this doesn't work with MSVC +// as I don't know how to detect the features here. +// +// NOTE: Keep this this in sync with crc64_table.c. +#elif (defined(__SSSE3__) && defined(__SSE4_1__) && defined(__PCLMUL__)) \ + || (defined(__e2k__) && __iset__ >= 6) +# define CRC_CLMUL 1 + +// Otherwise build both and detect at runtime which version to use. +#else +# define CRC_GENERIC 1 +# define CRC_CLMUL 1 + +/* + // The generic code is much faster with 1-8-byte inputs and has + // similar performance up to 16 bytes at least in microbenchmarks + // (it depends on input buffer alignment too). If both versions are + // built, this #define will use the generic version for inputs up to + // 16 bytes and CLMUL for bigger inputs. It saves a little in code + // size since the special cases for 0-16-byte inputs will be omitted + // from the CLMUL code. +# define CRC_USE_GENERIC_FOR_SMALL_INPUTS 1 +*/ + +# if defined(_MSC_VER) +# include +# elif defined(HAVE_CPUID_H) +# include +# endif +#endif + + +///////////////////////////////// +// Generic slice-by-four CRC64 // +///////////////////////////////// + +#ifdef CRC_GENERIC + +#include "crc_macros.h" + + +#ifdef WORDS_BIGENDIAN +# define A1(x) ((x) >> 56) +#else +# define A1 A +#endif + + +// See the comments in crc32_fast.c. They aren't duplicated here. +static uint64_t +crc64_generic(const uint8_t *buf, size_t size, uint64_t crc) +{ + crc = ~crc; + +#ifdef WORDS_BIGENDIAN + crc = bswap64(crc); +#endif + + if (size > 4) { + while ((uintptr_t)(buf) & 3) { + crc = lzma_crc64_table[0][*buf++ ^ A1(crc)] ^ S8(crc); + --size; + } + + const uint8_t *const limit = buf + (size & ~(size_t)(3)); + size &= (size_t)(3); + + while (buf < limit) { +#ifdef WORDS_BIGENDIAN + const uint32_t tmp = (uint32_t)(crc >> 32) + ^ aligned_read32ne(buf); +#else + const uint32_t tmp = (uint32_t)crc + ^ aligned_read32ne(buf); +#endif + buf += 4; + + crc = lzma_crc64_table[3][A(tmp)] + ^ lzma_crc64_table[2][B(tmp)] + ^ S32(crc) + ^ lzma_crc64_table[1][C(tmp)] + ^ lzma_crc64_table[0][D(tmp)]; + } + } + + while (size-- != 0) + crc = lzma_crc64_table[0][*buf++ ^ A1(crc)] ^ S8(crc); + +#ifdef WORDS_BIGENDIAN + crc = bswap64(crc); +#endif + + return ~crc; +} +#endif + + +///////////////////// +// x86 CLMUL CRC64 // +///////////////////// + +#ifdef CRC_CLMUL + +#include + + +/* +// These functions were used to generate the constants +// at the top of crc64_clmul(). +static uint64_t +calc_lo(uint64_t poly) +{ + uint64_t a = poly; + uint64_t b = 0; + + for (unsigned i = 0; i < 64; ++i) { + b = (b >> 1) | (a << 63); + a = (a >> 1) ^ (a & 1 ? poly : 0); + } + + return b; +} + +static uint64_t +calc_hi(uint64_t poly, uint64_t a) +{ + for (unsigned i = 0; i < 64; ++i) + a = (a >> 1) ^ (a & 1 ? poly : 0); + + return a; +} +*/ + + +#define MASK_L(in, mask, r) \ + r = _mm_shuffle_epi8(in, mask) + +#define MASK_H(in, mask, r) \ + r = _mm_shuffle_epi8(in, _mm_xor_si128(mask, vsign)) + +#define MASK_LH(in, mask, low, high) \ + MASK_L(in, mask, low); \ + MASK_H(in, mask, high) + + +// MSVC (VS2015 - VS2022) produces bad 32-bit x86 code from the CLMUL CRC +// code when optimizations are enabled (release build). According to the bug +// report, the ebx register is corrupted and the calculated result is wrong. +// Trying to workaround the problem with "__asm mov ebx, ebx" didn't help. +// The following pragma works and performance is still good. x86-64 builds +// aren't affected by this problem. +// +// NOTE: Another pragma after the function restores the optimizations. +// If the #if condition here is updated, the other one must be updated too. +#if defined(_MSC_VER) && !defined(__INTEL_COMPILER) && !defined(__clang__) \ + && defined(_M_IX86) +# pragma optimize("g", off) +#endif + +// EDG-based compilers (Intel's classic compiler and compiler for E2K) can +// define __GNUC__ but the attribute must not be used with them. +// The new Clang-based ICX needs the attribute. +// +// NOTE: Build systems check for this too, keep them in sync with this. +#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__) +__attribute__((__target__("ssse3,sse4.1,pclmul"))) +#endif +static uint64_t +crc64_clmul(const uint8_t *buf, size_t size, uint64_t crc) +{ + // The prototypes of the intrinsics use signed types while most of + // the values are treated as unsigned here. These warnings in this + // function have been checked and found to be harmless so silence them. +#if TUKLIB_GNUC_REQ(4, 6) || defined(__clang__) +# pragma GCC diagnostic push +# pragma GCC diagnostic ignored "-Wsign-conversion" +# pragma GCC diagnostic ignored "-Wconversion" +#endif + +#ifndef CRC_USE_GENERIC_FOR_SMALL_INPUTS + // The code assumes that there is at least one byte of input. + if (size == 0) + return crc; +#endif + + // const uint64_t poly = 0xc96c5795d7870f42; // CRC polynomial + const uint64_t p = 0x92d8af2baf0e1e85; // (poly << 1) | 1 + const uint64_t mu = 0x9c3e466c172963d5; // (calc_lo(poly) << 1) | 1 + const uint64_t k2 = 0xdabe95afc7875f40; // calc_hi(poly, 1) + const uint64_t k1 = 0xe05dd497ca393ae4; // calc_hi(poly, k2) + const __m128i vfold0 = _mm_set_epi64x(p, mu); + const __m128i vfold1 = _mm_set_epi64x(k2, k1); + + // Create a vector with 8-bit values 0 to 15. This is used to + // construct control masks for _mm_blendv_epi8 and _mm_shuffle_epi8. + const __m128i vramp = _mm_setr_epi32( + 0x03020100, 0x07060504, 0x0b0a0908, 0x0f0e0d0c); + + // This is used to inverse the control mask of _mm_shuffle_epi8 + // so that bytes that wouldn't be picked with the original mask + // will be picked and vice versa. + const __m128i vsign = _mm_set1_epi8(0x80); + + // Memory addresses A to D and the distances between them: + // + // A B C D + // [skip_start][size][skip_end] + // [ size2 ] + // + // A and D are 16-byte aligned. B and C are 1-byte aligned. + // skip_start and skip_end are 0-15 bytes. size is at least 1 byte. + // + // A = aligned_buf will initially point to this address. + // B = The address pointed by the caller-supplied buf. + // C = buf + size == aligned_buf + size2 + // D = buf + size + skip_end == aligned_buf + size2 + skip_end + const size_t skip_start = (size_t)((uintptr_t)buf & 15); + const size_t skip_end = (size_t)(-(uintptr_t)(buf + size) & 15); + const __m128i *aligned_buf = (const __m128i *)( + (uintptr_t)buf & ~(uintptr_t)15); + + // If size2 <= 16 then the whole input fits into a single 16-byte + // vector. If size2 > 16 then at least two 16-byte vectors must + // be processed. If size2 > 16 && size <= 16 then there is only + // one 16-byte vector's worth of input but it is unaligned in memory. + // + // NOTE: There is no integer overflow here if the arguments are valid. + // If this overflowed, buf + size would too. + size_t size2 = skip_start + size; + + // Masks to be used with _mm_blendv_epi8 and _mm_shuffle_epi8: + // The first skip_start or skip_end bytes in the vectors will have + // the high bit (0x80) set. _mm_blendv_epi8 and _mm_shuffle_epi8 + // will produce zeros for these positions. (Bitwise-xor of these + // masks with vsign will produce the opposite behavior.) + const __m128i mask_start + = _mm_sub_epi8(vramp, _mm_set1_epi8(skip_start)); + const __m128i mask_end = _mm_sub_epi8(vramp, _mm_set1_epi8(skip_end)); + + // Get the first 1-16 bytes into data0. If loading less than 16 bytes, + // the bytes are loaded to the high bits of the vector and the least + // significant positions are filled with zeros. + const __m128i data0 = _mm_blendv_epi8(_mm_load_si128(aligned_buf), + _mm_setzero_si128(), mask_start); + ++aligned_buf; + +#if defined(__i386__) || defined(_M_IX86) + const __m128i initial_crc = _mm_set_epi64x(0, ~crc); +#else + // GCC and Clang would produce good code with _mm_set_epi64x + // but MSVC needs _mm_cvtsi64_si128 on x86-64. + const __m128i initial_crc = _mm_cvtsi64_si128(~crc); +#endif + + __m128i v0, v1, v2, v3; + +#ifndef CRC_USE_GENERIC_FOR_SMALL_INPUTS + if (size <= 16) { + // Right-shift initial_crc by 1-16 bytes based on "size" + // and store the result in v1 (high bytes) and v0 (low bytes). + // + // NOTE: The highest 8 bytes of initial_crc are zeros so + // v1 will be filled with zeros if size >= 8. The highest 8 + // bytes of v1 will always become zeros. + // + // [ v1 ][ v0 ] + // [ initial_crc ] size == 1 + // [ initial_crc ] size == 2 + // [ initial_crc ] size == 15 + // [ initial_crc ] size == 16 (all in v0) + const __m128i mask_low = _mm_add_epi8( + vramp, _mm_set1_epi8(size - 16)); + MASK_LH(initial_crc, mask_low, v0, v1); + + if (size2 <= 16) { + // There are 1-16 bytes of input and it is all + // in data0. Copy the input bytes to v3. If there + // are fewer than 16 bytes, the low bytes in v3 + // will be filled with zeros. That is, the input + // bytes are stored to the same position as + // (part of) initial_crc is in v0. + MASK_L(data0, mask_end, v3); + } else { + // There are 2-16 bytes of input but not all bytes + // are in data0. + const __m128i data1 = _mm_load_si128(aligned_buf); + + // Collect the 2-16 input bytes from data0 and data1 + // to v2 and v3, and bitwise-xor them with the + // low bits of initial_crc in v0. Note that the + // the second xor is below this else-block as it + // is shared with the other branch. + MASK_H(data0, mask_end, v2); + MASK_L(data1, mask_end, v3); + v0 = _mm_xor_si128(v0, v2); + } + + v0 = _mm_xor_si128(v0, v3); + v1 = _mm_alignr_epi8(v1, v0, 8); + } else +#endif + { + const __m128i data1 = _mm_load_si128(aligned_buf); + MASK_LH(initial_crc, mask_start, v0, v1); + v0 = _mm_xor_si128(v0, data0); + v1 = _mm_xor_si128(v1, data1); + +#define FOLD \ + v1 = _mm_xor_si128(v1, _mm_clmulepi64_si128(v0, vfold1, 0x00)); \ + v0 = _mm_xor_si128(v1, _mm_clmulepi64_si128(v0, vfold1, 0x11)); + + while (size2 > 32) { + ++aligned_buf; + size2 -= 16; + FOLD + v1 = _mm_load_si128(aligned_buf); + } + + if (size2 < 32) { + MASK_H(v0, mask_end, v2); + MASK_L(v0, mask_end, v0); + MASK_L(v1, mask_end, v3); + v1 = _mm_or_si128(v2, v3); + } + + FOLD + v1 = _mm_srli_si128(v0, 8); +#undef FOLD + } + + v1 = _mm_xor_si128(_mm_clmulepi64_si128(v0, vfold1, 0x10), v1); + v0 = _mm_clmulepi64_si128(v1, vfold0, 0x00); + v2 = _mm_clmulepi64_si128(v0, vfold0, 0x10); + v0 = _mm_xor_si128(_mm_xor_si128(v2, _mm_slli_si128(v0, 8)), v1); + +#if defined(__i386__) || defined(_M_IX86) + return ~(((uint64_t)(uint32_t)_mm_extract_epi32(v0, 3) << 32) | + (uint64_t)(uint32_t)_mm_extract_epi32(v0, 2)); +#else + return ~(uint64_t)_mm_extract_epi64(v0, 1); +#endif + +#if TUKLIB_GNUC_REQ(4, 6) || defined(__clang__) +# pragma GCC diagnostic pop +#endif +} +#if defined(_MSC_VER) && !defined(__INTEL_COMPILER) && !defined(__clang__) \ + && defined(_M_IX86) +# pragma optimize("", on) +#endif +#endif + + +//////////////////////// +// Detect CPU support // +//////////////////////// + +#if defined(CRC_GENERIC) && defined(CRC_CLMUL) +static inline bool +is_clmul_supported(void) +{ + int success = 1; + uint32_t r[4]; // eax, ebx, ecx, edx + +#if defined(_MSC_VER) + // This needs with MSVC. ICC has it as a built-in + // on all platforms. + __cpuid(r, 1); +#elif defined(HAVE_CPUID_H) + // Compared to just using __asm__ to run CPUID, this also checks + // that CPUID is supported and saves and restores ebx as that is + // needed with GCC < 5 with position-independent code (PIC). + success = __get_cpuid(1, &r[0], &r[1], &r[2], &r[3]); +#else + // Just a fallback that shouldn't be needed. + __asm__("cpuid\n\t" + : "=a"(r[0]), "=b"(r[1]), "=c"(r[2]), "=d"(r[3]) + : "a"(1), "c"(0)); +#endif + + // Returns true if these are supported: + // CLMUL (bit 1 in ecx) + // SSSE3 (bit 9 in ecx) + // SSE4.1 (bit 19 in ecx) + const uint32_t ecx_mask = (1 << 1) | (1 << 9) | (1 << 19); + return success && (r[2] & ecx_mask) == ecx_mask; + + // Alternative methods that weren't used: + // - ICC's _may_i_use_cpu_feature: the other methods should work too. + // - GCC >= 6 / Clang / ICX __builtin_cpu_supports("pclmul") + // + // CPUID decding is needed with MSVC anyway and older GCC. This keeps + // the feature checks in the build system simpler too. The nice thing + // about __builtin_cpu_supports would be that it generates very short + // code as is it only reads a variable set at startup but a few bytes + // doesn't matter here. +} + + +#ifdef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR +# define CRC64_FUNC_INIT +# define CRC64_SET_FUNC_ATTR __attribute__((__constructor__)) +#else +# define CRC64_FUNC_INIT = &crc64_dispatch +# define CRC64_SET_FUNC_ATTR +static uint64_t crc64_dispatch(const uint8_t *buf, size_t size, uint64_t crc); +#endif + + +// Pointer to the the selected CRC64 method. +static uint64_t (*crc64_func)(const uint8_t *buf, size_t size, uint64_t crc) + CRC64_FUNC_INIT; + + +CRC64_SET_FUNC_ATTR +static void +crc64_set_func(void) +{ + crc64_func = is_clmul_supported() ? &crc64_clmul : &crc64_generic; + return; +} + + +#ifndef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR +static uint64_t +crc64_dispatch(const uint8_t *buf, size_t size, uint64_t crc) +{ + // When __attribute__((__constructor__)) isn't supported, set the + // function pointer without any locking. If multiple threads run + // the detection code in parallel, they will all end up setting + // the pointer to the same value. This avoids the use of + // mythread_once() on every call to lzma_crc64() but this likely + // isn't strictly standards compliant. Let's change it if it breaks. + crc64_set_func(); + return crc64_func(buf, size, crc); +} +#endif +#endif + + +extern LZMA_API(uint64_t) +lzma_crc64(const uint8_t *buf, size_t size, uint64_t crc) +{ +#if defined(CRC_GENERIC) && defined(CRC_CLMUL) + // If CLMUL is available, it is the best for non-tiny inputs, + // being over twice as fast as the generic slice-by-four version. + // However, for size <= 16 it's different. In the extreme case + // of size == 1 the generic version can be five times faster. + // At size >= 8 the CLMUL starts to become reasonable. It + // varies depending on the alignment of buf too. + // + // The above doesn't include the overhead of mythread_once(). + // At least on x86-64 GNU/Linux, pthread_once() is very fast but + // it still makes lzma_crc64(buf, 1, crc) 50-100 % slower. When + // size reaches 12-16 bytes the overhead becomes negligible. + // + // So using the generic version for size <= 16 may give better + // performance with tiny inputs but if such inputs happen rarely + // it's not so obvious because then the lookup table of the + // generic version may not be in the processor cache. +#ifdef CRC_USE_GENERIC_FOR_SMALL_INPUTS + if (size <= 16) + return crc64_generic(buf, size, crc); +#endif + +/* +#ifndef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR + // See crc64_dispatch(). This would be the alternative which uses + // locking and doesn't use crc64_dispatch(). Note that on Windows + // this method needs Vista threads. + mythread_once(crc64_set_func); +#endif +*/ + + return crc64_func(buf, size, crc); + +#elif defined(CRC_CLMUL) + // If CLMUL is used unconditionally without runtime CPU detection + // then omitting the generic version and its 8 KiB lookup table + // makes the library smaller. + // + // FIXME: Lookup table isn't currently omitted on 32-bit x86, + // see crc64_table.c. + return crc64_clmul(buf, size, crc); + +#else + return crc64_generic(buf, size, crc); +#endif +} diff --git a/src/liblzma/check/crc64_small.c b/src/liblzma/check/crc64_small.c new file mode 100644 index 0000000..420f7cf --- /dev/null +++ b/src/liblzma/check/crc64_small.c @@ -0,0 +1,58 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc64_small.c +/// \brief CRC64 calculation (size-optimized) +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "check.h" + + +static uint64_t crc64_table[256]; + + +#ifdef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR +__attribute__((__constructor__)) +#endif +static void +crc64_init(void) +{ + static const uint64_t poly64 = UINT64_C(0xC96C5795D7870F42); + + for (size_t b = 0; b < 256; ++b) { + uint64_t r = b; + for (size_t i = 0; i < 8; ++i) { + if (r & 1) + r = (r >> 1) ^ poly64; + else + r >>= 1; + } + + crc64_table[b] = r; + } + + return; +} + + +extern LZMA_API(uint64_t) +lzma_crc64(const uint8_t *buf, size_t size, uint64_t crc) +{ +#ifndef HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR + mythread_once(crc64_init); +#endif + + crc = ~crc; + + while (size != 0) { + crc = crc64_table[*buf++ ^ (crc & 0xFF)] ^ (crc >> 8); + --size; + } + + return ~crc; +} diff --git a/src/liblzma/check/crc64_table.c b/src/liblzma/check/crc64_table.c new file mode 100644 index 0000000..241adcd --- /dev/null +++ b/src/liblzma/check/crc64_table.c @@ -0,0 +1,35 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc64_table.c +/// \brief Precalculated CRC64 table with correct endianness +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +// FIXME: Compared to crc64_fast.c this has to check for __x86_64__ too +// so that in 32-bit builds crc64_x86.S won't break due to a missing table. +#if (defined(__x86_64__) && defined(__SSSE3__) \ + && defined(__SSE4_1__) && defined(__PCLMUL__)) \ + || (defined(__e2k__) && __iset__ >= 6) +// No table needed but something has to be exported to keep some toolchains +// happy. Also use a declaration to silence compiler warnings. +extern const char lzma_crc64_dummy; +const char lzma_crc64_dummy; + +#else +// Having the declaration here silences clang -Wmissing-variable-declarations. +extern const uint64_t lzma_crc64_table[4][256]; + +# if defined(WORDS_BIGENDIAN) +# include "crc64_table_be.h" +# else +# include "crc64_table_le.h" +# endif +#endif diff --git a/src/liblzma/check/crc64_table_be.h b/src/liblzma/check/crc64_table_be.h new file mode 100644 index 0000000..ea074f3 --- /dev/null +++ b/src/liblzma/check/crc64_table_be.h @@ -0,0 +1,521 @@ +/* This file has been automatically generated by crc64_tablegen.c. */ + +const uint64_t lzma_crc64_table[4][256] = { + { + UINT64_C(0x0000000000000000), UINT64_C(0x6F5FA703BE4C2EB3), + UINT64_C(0x5BA040A8573684F4), UINT64_C(0x34FFE7ABE97AAA47), + UINT64_C(0x335E8FFF84C3D07B), UINT64_C(0x5C0128FC3A8FFEC8), + UINT64_C(0x68FECF57D3F5548F), UINT64_C(0x07A168546DB97A3C), + UINT64_C(0x66BC1EFF0987A1F7), UINT64_C(0x09E3B9FCB7CB8F44), + UINT64_C(0x3D1C5E575EB12503), UINT64_C(0x5243F954E0FD0BB0), + UINT64_C(0x55E291008D44718C), UINT64_C(0x3ABD360333085F3F), + UINT64_C(0x0E42D1A8DA72F578), UINT64_C(0x611D76AB643EDBCB), + UINT64_C(0x4966335138A19B7D), UINT64_C(0x2639945286EDB5CE), + UINT64_C(0x12C673F96F971F89), UINT64_C(0x7D99D4FAD1DB313A), + UINT64_C(0x7A38BCAEBC624B06), UINT64_C(0x15671BAD022E65B5), + UINT64_C(0x2198FC06EB54CFF2), UINT64_C(0x4EC75B055518E141), + UINT64_C(0x2FDA2DAE31263A8A), UINT64_C(0x40858AAD8F6A1439), + UINT64_C(0x747A6D066610BE7E), UINT64_C(0x1B25CA05D85C90CD), + UINT64_C(0x1C84A251B5E5EAF1), UINT64_C(0x73DB05520BA9C442), + UINT64_C(0x4724E2F9E2D36E05), UINT64_C(0x287B45FA5C9F40B6), + UINT64_C(0x92CC66A2704237FB), UINT64_C(0xFD93C1A1CE0E1948), + UINT64_C(0xC96C260A2774B30F), UINT64_C(0xA633810999389DBC), + UINT64_C(0xA192E95DF481E780), UINT64_C(0xCECD4E5E4ACDC933), + UINT64_C(0xFA32A9F5A3B76374), UINT64_C(0x956D0EF61DFB4DC7), + UINT64_C(0xF470785D79C5960C), UINT64_C(0x9B2FDF5EC789B8BF), + UINT64_C(0xAFD038F52EF312F8), UINT64_C(0xC08F9FF690BF3C4B), + UINT64_C(0xC72EF7A2FD064677), UINT64_C(0xA87150A1434A68C4), + UINT64_C(0x9C8EB70AAA30C283), UINT64_C(0xF3D11009147CEC30), + UINT64_C(0xDBAA55F348E3AC86), UINT64_C(0xB4F5F2F0F6AF8235), + UINT64_C(0x800A155B1FD52872), UINT64_C(0xEF55B258A19906C1), + UINT64_C(0xE8F4DA0CCC207CFD), UINT64_C(0x87AB7D0F726C524E), + UINT64_C(0xB3549AA49B16F809), UINT64_C(0xDC0B3DA7255AD6BA), + UINT64_C(0xBD164B0C41640D71), UINT64_C(0xD249EC0FFF2823C2), + UINT64_C(0xE6B60BA416528985), UINT64_C(0x89E9ACA7A81EA736), + UINT64_C(0x8E48C4F3C5A7DD0A), UINT64_C(0xE11763F07BEBF3B9), + UINT64_C(0xD5E8845B929159FE), UINT64_C(0xBAB723582CDD774D), + UINT64_C(0xA187C3EBCA2BB664), UINT64_C(0xCED864E8746798D7), + UINT64_C(0xFA2783439D1D3290), UINT64_C(0x9578244023511C23), + UINT64_C(0x92D94C144EE8661F), UINT64_C(0xFD86EB17F0A448AC), + UINT64_C(0xC9790CBC19DEE2EB), UINT64_C(0xA626ABBFA792CC58), + UINT64_C(0xC73BDD14C3AC1793), UINT64_C(0xA8647A177DE03920), + UINT64_C(0x9C9B9DBC949A9367), UINT64_C(0xF3C43ABF2AD6BDD4), + UINT64_C(0xF46552EB476FC7E8), UINT64_C(0x9B3AF5E8F923E95B), + UINT64_C(0xAFC512431059431C), UINT64_C(0xC09AB540AE156DAF), + UINT64_C(0xE8E1F0BAF28A2D19), UINT64_C(0x87BE57B94CC603AA), + UINT64_C(0xB341B012A5BCA9ED), UINT64_C(0xDC1E17111BF0875E), + UINT64_C(0xDBBF7F457649FD62), UINT64_C(0xB4E0D846C805D3D1), + UINT64_C(0x801F3FED217F7996), UINT64_C(0xEF4098EE9F335725), + UINT64_C(0x8E5DEE45FB0D8CEE), UINT64_C(0xE10249464541A25D), + UINT64_C(0xD5FDAEEDAC3B081A), UINT64_C(0xBAA209EE127726A9), + UINT64_C(0xBD0361BA7FCE5C95), UINT64_C(0xD25CC6B9C1827226), + UINT64_C(0xE6A3211228F8D861), UINT64_C(0x89FC861196B4F6D2), + UINT64_C(0x334BA549BA69819F), UINT64_C(0x5C14024A0425AF2C), + UINT64_C(0x68EBE5E1ED5F056B), UINT64_C(0x07B442E253132BD8), + UINT64_C(0x00152AB63EAA51E4), UINT64_C(0x6F4A8DB580E67F57), + UINT64_C(0x5BB56A1E699CD510), UINT64_C(0x34EACD1DD7D0FBA3), + UINT64_C(0x55F7BBB6B3EE2068), UINT64_C(0x3AA81CB50DA20EDB), + UINT64_C(0x0E57FB1EE4D8A49C), UINT64_C(0x61085C1D5A948A2F), + UINT64_C(0x66A93449372DF013), UINT64_C(0x09F6934A8961DEA0), + UINT64_C(0x3D0974E1601B74E7), UINT64_C(0x5256D3E2DE575A54), + UINT64_C(0x7A2D961882C81AE2), UINT64_C(0x1572311B3C843451), + UINT64_C(0x218DD6B0D5FE9E16), UINT64_C(0x4ED271B36BB2B0A5), + UINT64_C(0x497319E7060BCA99), UINT64_C(0x262CBEE4B847E42A), + UINT64_C(0x12D3594F513D4E6D), UINT64_C(0x7D8CFE4CEF7160DE), + UINT64_C(0x1C9188E78B4FBB15), UINT64_C(0x73CE2FE4350395A6), + UINT64_C(0x4731C84FDC793FE1), UINT64_C(0x286E6F4C62351152), + UINT64_C(0x2FCF07180F8C6B6E), UINT64_C(0x4090A01BB1C045DD), + UINT64_C(0x746F47B058BAEF9A), UINT64_C(0x1B30E0B3E6F6C129), + UINT64_C(0x420F87D795576CC9), UINT64_C(0x2D5020D42B1B427A), + UINT64_C(0x19AFC77FC261E83D), UINT64_C(0x76F0607C7C2DC68E), + UINT64_C(0x715108281194BCB2), UINT64_C(0x1E0EAF2BAFD89201), + UINT64_C(0x2AF1488046A23846), UINT64_C(0x45AEEF83F8EE16F5), + UINT64_C(0x24B399289CD0CD3E), UINT64_C(0x4BEC3E2B229CE38D), + UINT64_C(0x7F13D980CBE649CA), UINT64_C(0x104C7E8375AA6779), + UINT64_C(0x17ED16D718131D45), UINT64_C(0x78B2B1D4A65F33F6), + UINT64_C(0x4C4D567F4F2599B1), UINT64_C(0x2312F17CF169B702), + UINT64_C(0x0B69B486ADF6F7B4), UINT64_C(0x6436138513BAD907), + UINT64_C(0x50C9F42EFAC07340), UINT64_C(0x3F96532D448C5DF3), + UINT64_C(0x38373B79293527CF), UINT64_C(0x57689C7A9779097C), + UINT64_C(0x63977BD17E03A33B), UINT64_C(0x0CC8DCD2C04F8D88), + UINT64_C(0x6DD5AA79A4715643), UINT64_C(0x028A0D7A1A3D78F0), + UINT64_C(0x3675EAD1F347D2B7), UINT64_C(0x592A4DD24D0BFC04), + UINT64_C(0x5E8B258620B28638), UINT64_C(0x31D482859EFEA88B), + UINT64_C(0x052B652E778402CC), UINT64_C(0x6A74C22DC9C82C7F), + UINT64_C(0xD0C3E175E5155B32), UINT64_C(0xBF9C46765B597581), + UINT64_C(0x8B63A1DDB223DFC6), UINT64_C(0xE43C06DE0C6FF175), + UINT64_C(0xE39D6E8A61D68B49), UINT64_C(0x8CC2C989DF9AA5FA), + UINT64_C(0xB83D2E2236E00FBD), UINT64_C(0xD762892188AC210E), + UINT64_C(0xB67FFF8AEC92FAC5), UINT64_C(0xD920588952DED476), + UINT64_C(0xEDDFBF22BBA47E31), UINT64_C(0x8280182105E85082), + UINT64_C(0x8521707568512ABE), UINT64_C(0xEA7ED776D61D040D), + UINT64_C(0xDE8130DD3F67AE4A), UINT64_C(0xB1DE97DE812B80F9), + UINT64_C(0x99A5D224DDB4C04F), UINT64_C(0xF6FA752763F8EEFC), + UINT64_C(0xC205928C8A8244BB), UINT64_C(0xAD5A358F34CE6A08), + UINT64_C(0xAAFB5DDB59771034), UINT64_C(0xC5A4FAD8E73B3E87), + UINT64_C(0xF15B1D730E4194C0), UINT64_C(0x9E04BA70B00DBA73), + UINT64_C(0xFF19CCDBD43361B8), UINT64_C(0x90466BD86A7F4F0B), + UINT64_C(0xA4B98C738305E54C), UINT64_C(0xCBE62B703D49CBFF), + UINT64_C(0xCC47432450F0B1C3), UINT64_C(0xA318E427EEBC9F70), + UINT64_C(0x97E7038C07C63537), UINT64_C(0xF8B8A48FB98A1B84), + UINT64_C(0xE388443C5F7CDAAD), UINT64_C(0x8CD7E33FE130F41E), + UINT64_C(0xB8280494084A5E59), UINT64_C(0xD777A397B60670EA), + UINT64_C(0xD0D6CBC3DBBF0AD6), UINT64_C(0xBF896CC065F32465), + UINT64_C(0x8B768B6B8C898E22), UINT64_C(0xE4292C6832C5A091), + UINT64_C(0x85345AC356FB7B5A), UINT64_C(0xEA6BFDC0E8B755E9), + UINT64_C(0xDE941A6B01CDFFAE), UINT64_C(0xB1CBBD68BF81D11D), + UINT64_C(0xB66AD53CD238AB21), UINT64_C(0xD935723F6C748592), + UINT64_C(0xEDCA9594850E2FD5), UINT64_C(0x829532973B420166), + UINT64_C(0xAAEE776D67DD41D0), UINT64_C(0xC5B1D06ED9916F63), + UINT64_C(0xF14E37C530EBC524), UINT64_C(0x9E1190C68EA7EB97), + UINT64_C(0x99B0F892E31E91AB), UINT64_C(0xF6EF5F915D52BF18), + UINT64_C(0xC210B83AB428155F), UINT64_C(0xAD4F1F390A643BEC), + UINT64_C(0xCC5269926E5AE027), UINT64_C(0xA30DCE91D016CE94), + UINT64_C(0x97F2293A396C64D3), UINT64_C(0xF8AD8E3987204A60), + UINT64_C(0xFF0CE66DEA99305C), UINT64_C(0x9053416E54D51EEF), + UINT64_C(0xA4ACA6C5BDAFB4A8), UINT64_C(0xCBF301C603E39A1B), + UINT64_C(0x7144229E2F3EED56), UINT64_C(0x1E1B859D9172C3E5), + UINT64_C(0x2AE46236780869A2), UINT64_C(0x45BBC535C6444711), + UINT64_C(0x421AAD61ABFD3D2D), UINT64_C(0x2D450A6215B1139E), + UINT64_C(0x19BAEDC9FCCBB9D9), UINT64_C(0x76E54ACA4287976A), + UINT64_C(0x17F83C6126B94CA1), UINT64_C(0x78A79B6298F56212), + UINT64_C(0x4C587CC9718FC855), UINT64_C(0x2307DBCACFC3E6E6), + UINT64_C(0x24A6B39EA27A9CDA), UINT64_C(0x4BF9149D1C36B269), + UINT64_C(0x7F06F336F54C182E), UINT64_C(0x105954354B00369D), + UINT64_C(0x382211CF179F762B), UINT64_C(0x577DB6CCA9D35898), + UINT64_C(0x6382516740A9F2DF), UINT64_C(0x0CDDF664FEE5DC6C), + UINT64_C(0x0B7C9E30935CA650), UINT64_C(0x642339332D1088E3), + UINT64_C(0x50DCDE98C46A22A4), UINT64_C(0x3F83799B7A260C17), + UINT64_C(0x5E9E0F301E18D7DC), UINT64_C(0x31C1A833A054F96F), + UINT64_C(0x053E4F98492E5328), UINT64_C(0x6A61E89BF7627D9B), + UINT64_C(0x6DC080CF9ADB07A7), UINT64_C(0x029F27CC24972914), + UINT64_C(0x3660C067CDED8353), UINT64_C(0x593F676473A1ADE0) + }, { + UINT64_C(0x0000000000000000), UINT64_C(0x0DF1D05C9279E954), + UINT64_C(0x1AE2A1B924F3D2A9), UINT64_C(0x171371E5B68A3BFD), + UINT64_C(0xB1DA4DDC62497DC1), UINT64_C(0xBC2B9D80F0309495), + UINT64_C(0xAB38EC6546BAAF68), UINT64_C(0xA6C93C39D4C3463C), + UINT64_C(0xE7AB9517EE3D2210), UINT64_C(0xEA5A454B7C44CB44), + UINT64_C(0xFD4934AECACEF0B9), UINT64_C(0xF0B8E4F258B719ED), + UINT64_C(0x5671D8CB8C745FD1), UINT64_C(0x5B8008971E0DB685), + UINT64_C(0x4C937972A8878D78), UINT64_C(0x4162A92E3AFE642C), + UINT64_C(0xCE572B2FDC7B4420), UINT64_C(0xC3A6FB734E02AD74), + UINT64_C(0xD4B58A96F8889689), UINT64_C(0xD9445ACA6AF17FDD), + UINT64_C(0x7F8D66F3BE3239E1), UINT64_C(0x727CB6AF2C4BD0B5), + UINT64_C(0x656FC74A9AC1EB48), UINT64_C(0x689E171608B8021C), + UINT64_C(0x29FCBE3832466630), UINT64_C(0x240D6E64A03F8F64), + UINT64_C(0x331E1F8116B5B499), UINT64_C(0x3EEFCFDD84CC5DCD), + UINT64_C(0x9826F3E4500F1BF1), UINT64_C(0x95D723B8C276F2A5), + UINT64_C(0x82C4525D74FCC958), UINT64_C(0x8F358201E685200C), + UINT64_C(0x9CAF565EB8F78840), UINT64_C(0x915E86022A8E6114), + UINT64_C(0x864DF7E79C045AE9), UINT64_C(0x8BBC27BB0E7DB3BD), + UINT64_C(0x2D751B82DABEF581), UINT64_C(0x2084CBDE48C71CD5), + UINT64_C(0x3797BA3BFE4D2728), UINT64_C(0x3A666A676C34CE7C), + UINT64_C(0x7B04C34956CAAA50), UINT64_C(0x76F51315C4B34304), + UINT64_C(0x61E662F0723978F9), UINT64_C(0x6C17B2ACE04091AD), + UINT64_C(0xCADE8E953483D791), UINT64_C(0xC72F5EC9A6FA3EC5), + UINT64_C(0xD03C2F2C10700538), UINT64_C(0xDDCDFF708209EC6C), + UINT64_C(0x52F87D71648CCC60), UINT64_C(0x5F09AD2DF6F52534), + UINT64_C(0x481ADCC8407F1EC9), UINT64_C(0x45EB0C94D206F79D), + UINT64_C(0xE32230AD06C5B1A1), UINT64_C(0xEED3E0F194BC58F5), + UINT64_C(0xF9C0911422366308), UINT64_C(0xF4314148B04F8A5C), + UINT64_C(0xB553E8668AB1EE70), UINT64_C(0xB8A2383A18C80724), + UINT64_C(0xAFB149DFAE423CD9), UINT64_C(0xA24099833C3BD58D), + UINT64_C(0x0489A5BAE8F893B1), UINT64_C(0x097875E67A817AE5), + UINT64_C(0x1E6B0403CC0B4118), UINT64_C(0x139AD45F5E72A84C), + UINT64_C(0x385FADBC70EF1181), UINT64_C(0x35AE7DE0E296F8D5), + UINT64_C(0x22BD0C05541CC328), UINT64_C(0x2F4CDC59C6652A7C), + UINT64_C(0x8985E06012A66C40), UINT64_C(0x8474303C80DF8514), + UINT64_C(0x936741D93655BEE9), UINT64_C(0x9E969185A42C57BD), + UINT64_C(0xDFF438AB9ED23391), UINT64_C(0xD205E8F70CABDAC5), + UINT64_C(0xC5169912BA21E138), UINT64_C(0xC8E7494E2858086C), + UINT64_C(0x6E2E7577FC9B4E50), UINT64_C(0x63DFA52B6EE2A704), + UINT64_C(0x74CCD4CED8689CF9), UINT64_C(0x793D04924A1175AD), + UINT64_C(0xF6088693AC9455A1), UINT64_C(0xFBF956CF3EEDBCF5), + UINT64_C(0xECEA272A88678708), UINT64_C(0xE11BF7761A1E6E5C), + UINT64_C(0x47D2CB4FCEDD2860), UINT64_C(0x4A231B135CA4C134), + UINT64_C(0x5D306AF6EA2EFAC9), UINT64_C(0x50C1BAAA7857139D), + UINT64_C(0x11A3138442A977B1), UINT64_C(0x1C52C3D8D0D09EE5), + UINT64_C(0x0B41B23D665AA518), UINT64_C(0x06B06261F4234C4C), + UINT64_C(0xA0795E5820E00A70), UINT64_C(0xAD888E04B299E324), + UINT64_C(0xBA9BFFE10413D8D9), UINT64_C(0xB76A2FBD966A318D), + UINT64_C(0xA4F0FBE2C81899C1), UINT64_C(0xA9012BBE5A617095), + UINT64_C(0xBE125A5BECEB4B68), UINT64_C(0xB3E38A077E92A23C), + UINT64_C(0x152AB63EAA51E400), UINT64_C(0x18DB666238280D54), + UINT64_C(0x0FC817878EA236A9), UINT64_C(0x0239C7DB1CDBDFFD), + UINT64_C(0x435B6EF52625BBD1), UINT64_C(0x4EAABEA9B45C5285), + UINT64_C(0x59B9CF4C02D66978), UINT64_C(0x54481F1090AF802C), + UINT64_C(0xF2812329446CC610), UINT64_C(0xFF70F375D6152F44), + UINT64_C(0xE8638290609F14B9), UINT64_C(0xE59252CCF2E6FDED), + UINT64_C(0x6AA7D0CD1463DDE1), UINT64_C(0x67560091861A34B5), + UINT64_C(0x7045717430900F48), UINT64_C(0x7DB4A128A2E9E61C), + UINT64_C(0xDB7D9D11762AA020), UINT64_C(0xD68C4D4DE4534974), + UINT64_C(0xC19F3CA852D97289), UINT64_C(0xCC6EECF4C0A09BDD), + UINT64_C(0x8D0C45DAFA5EFFF1), UINT64_C(0x80FD9586682716A5), + UINT64_C(0x97EEE463DEAD2D58), UINT64_C(0x9A1F343F4CD4C40C), + UINT64_C(0x3CD6080698178230), UINT64_C(0x3127D85A0A6E6B64), + UINT64_C(0x2634A9BFBCE45099), UINT64_C(0x2BC579E32E9DB9CD), + UINT64_C(0xF5A054D6CA71FB90), UINT64_C(0xF851848A580812C4), + UINT64_C(0xEF42F56FEE822939), UINT64_C(0xE2B325337CFBC06D), + UINT64_C(0x447A190AA8388651), UINT64_C(0x498BC9563A416F05), + UINT64_C(0x5E98B8B38CCB54F8), UINT64_C(0x536968EF1EB2BDAC), + UINT64_C(0x120BC1C1244CD980), UINT64_C(0x1FFA119DB63530D4), + UINT64_C(0x08E9607800BF0B29), UINT64_C(0x0518B02492C6E27D), + UINT64_C(0xA3D18C1D4605A441), UINT64_C(0xAE205C41D47C4D15), + UINT64_C(0xB9332DA462F676E8), UINT64_C(0xB4C2FDF8F08F9FBC), + UINT64_C(0x3BF77FF9160ABFB0), UINT64_C(0x3606AFA5847356E4), + UINT64_C(0x2115DE4032F96D19), UINT64_C(0x2CE40E1CA080844D), + UINT64_C(0x8A2D32257443C271), UINT64_C(0x87DCE279E63A2B25), + UINT64_C(0x90CF939C50B010D8), UINT64_C(0x9D3E43C0C2C9F98C), + UINT64_C(0xDC5CEAEEF8379DA0), UINT64_C(0xD1AD3AB26A4E74F4), + UINT64_C(0xC6BE4B57DCC44F09), UINT64_C(0xCB4F9B0B4EBDA65D), + UINT64_C(0x6D86A7329A7EE061), UINT64_C(0x6077776E08070935), + UINT64_C(0x7764068BBE8D32C8), UINT64_C(0x7A95D6D72CF4DB9C), + UINT64_C(0x690F0288728673D0), UINT64_C(0x64FED2D4E0FF9A84), + UINT64_C(0x73EDA3315675A179), UINT64_C(0x7E1C736DC40C482D), + UINT64_C(0xD8D54F5410CF0E11), UINT64_C(0xD5249F0882B6E745), + UINT64_C(0xC237EEED343CDCB8), UINT64_C(0xCFC63EB1A64535EC), + UINT64_C(0x8EA4979F9CBB51C0), UINT64_C(0x835547C30EC2B894), + UINT64_C(0x94463626B8488369), UINT64_C(0x99B7E67A2A316A3D), + UINT64_C(0x3F7EDA43FEF22C01), UINT64_C(0x328F0A1F6C8BC555), + UINT64_C(0x259C7BFADA01FEA8), UINT64_C(0x286DABA6487817FC), + UINT64_C(0xA75829A7AEFD37F0), UINT64_C(0xAAA9F9FB3C84DEA4), + UINT64_C(0xBDBA881E8A0EE559), UINT64_C(0xB04B584218770C0D), + UINT64_C(0x1682647BCCB44A31), UINT64_C(0x1B73B4275ECDA365), + UINT64_C(0x0C60C5C2E8479898), UINT64_C(0x0191159E7A3E71CC), + UINT64_C(0x40F3BCB040C015E0), UINT64_C(0x4D026CECD2B9FCB4), + UINT64_C(0x5A111D096433C749), UINT64_C(0x57E0CD55F64A2E1D), + UINT64_C(0xF129F16C22896821), UINT64_C(0xFCD82130B0F08175), + UINT64_C(0xEBCB50D5067ABA88), UINT64_C(0xE63A8089940353DC), + UINT64_C(0xCDFFF96ABA9EEA11), UINT64_C(0xC00E293628E70345), + UINT64_C(0xD71D58D39E6D38B8), UINT64_C(0xDAEC888F0C14D1EC), + UINT64_C(0x7C25B4B6D8D797D0), UINT64_C(0x71D464EA4AAE7E84), + UINT64_C(0x66C7150FFC244579), UINT64_C(0x6B36C5536E5DAC2D), + UINT64_C(0x2A546C7D54A3C801), UINT64_C(0x27A5BC21C6DA2155), + UINT64_C(0x30B6CDC470501AA8), UINT64_C(0x3D471D98E229F3FC), + UINT64_C(0x9B8E21A136EAB5C0), UINT64_C(0x967FF1FDA4935C94), + UINT64_C(0x816C801812196769), UINT64_C(0x8C9D504480608E3D), + UINT64_C(0x03A8D24566E5AE31), UINT64_C(0x0E590219F49C4765), + UINT64_C(0x194A73FC42167C98), UINT64_C(0x14BBA3A0D06F95CC), + UINT64_C(0xB2729F9904ACD3F0), UINT64_C(0xBF834FC596D53AA4), + UINT64_C(0xA8903E20205F0159), UINT64_C(0xA561EE7CB226E80D), + UINT64_C(0xE403475288D88C21), UINT64_C(0xE9F2970E1AA16575), + UINT64_C(0xFEE1E6EBAC2B5E88), UINT64_C(0xF31036B73E52B7DC), + UINT64_C(0x55D90A8EEA91F1E0), UINT64_C(0x5828DAD278E818B4), + UINT64_C(0x4F3BAB37CE622349), UINT64_C(0x42CA7B6B5C1BCA1D), + UINT64_C(0x5150AF3402696251), UINT64_C(0x5CA17F6890108B05), + UINT64_C(0x4BB20E8D269AB0F8), UINT64_C(0x4643DED1B4E359AC), + UINT64_C(0xE08AE2E860201F90), UINT64_C(0xED7B32B4F259F6C4), + UINT64_C(0xFA68435144D3CD39), UINT64_C(0xF799930DD6AA246D), + UINT64_C(0xB6FB3A23EC544041), UINT64_C(0xBB0AEA7F7E2DA915), + UINT64_C(0xAC199B9AC8A792E8), UINT64_C(0xA1E84BC65ADE7BBC), + UINT64_C(0x072177FF8E1D3D80), UINT64_C(0x0AD0A7A31C64D4D4), + UINT64_C(0x1DC3D646AAEEEF29), UINT64_C(0x1032061A3897067D), + UINT64_C(0x9F07841BDE122671), UINT64_C(0x92F654474C6BCF25), + UINT64_C(0x85E525A2FAE1F4D8), UINT64_C(0x8814F5FE68981D8C), + UINT64_C(0x2EDDC9C7BC5B5BB0), UINT64_C(0x232C199B2E22B2E4), + UINT64_C(0x343F687E98A88919), UINT64_C(0x39CEB8220AD1604D), + UINT64_C(0x78AC110C302F0461), UINT64_C(0x755DC150A256ED35), + UINT64_C(0x624EB0B514DCD6C8), UINT64_C(0x6FBF60E986A53F9C), + UINT64_C(0xC9765CD0526679A0), UINT64_C(0xC4878C8CC01F90F4), + UINT64_C(0xD394FD697695AB09), UINT64_C(0xDE652D35E4EC425D) + }, { + UINT64_C(0x0000000000000000), UINT64_C(0xCB6D6A914AE10B3F), + UINT64_C(0x96DBD42295C2177E), UINT64_C(0x5DB6BEB3DF231C41), + UINT64_C(0x2CB7A9452A852FFC), UINT64_C(0xE7DAC3D4606424C3), + UINT64_C(0xBA6C7D67BF473882), UINT64_C(0x710117F6F5A633BD), + UINT64_C(0xDD705D247FA5876A), UINT64_C(0x161D37B535448C55), + UINT64_C(0x4BAB8906EA679014), UINT64_C(0x80C6E397A0869B2B), + UINT64_C(0xF1C7F4615520A896), UINT64_C(0x3AAA9EF01FC1A3A9), + UINT64_C(0x671C2043C0E2BFE8), UINT64_C(0xAC714AD28A03B4D7), + UINT64_C(0xBAE1BA48FE4A0FD5), UINT64_C(0x718CD0D9B4AB04EA), + UINT64_C(0x2C3A6E6A6B8818AB), UINT64_C(0xE75704FB21691394), + UINT64_C(0x9656130DD4CF2029), UINT64_C(0x5D3B799C9E2E2B16), + UINT64_C(0x008DC72F410D3757), UINT64_C(0xCBE0ADBE0BEC3C68), + UINT64_C(0x6791E76C81EF88BF), UINT64_C(0xACFC8DFDCB0E8380), + UINT64_C(0xF14A334E142D9FC1), UINT64_C(0x3A2759DF5ECC94FE), + UINT64_C(0x4B264E29AB6AA743), UINT64_C(0x804B24B8E18BAC7C), + UINT64_C(0xDDFD9A0B3EA8B03D), UINT64_C(0x1690F09A7449BB02), + UINT64_C(0xF1DD7B3ED73AC638), UINT64_C(0x3AB011AF9DDBCD07), + UINT64_C(0x6706AF1C42F8D146), UINT64_C(0xAC6BC58D0819DA79), + UINT64_C(0xDD6AD27BFDBFE9C4), UINT64_C(0x1607B8EAB75EE2FB), + UINT64_C(0x4BB10659687DFEBA), UINT64_C(0x80DC6CC8229CF585), + UINT64_C(0x2CAD261AA89F4152), UINT64_C(0xE7C04C8BE27E4A6D), + UINT64_C(0xBA76F2383D5D562C), UINT64_C(0x711B98A977BC5D13), + UINT64_C(0x001A8F5F821A6EAE), UINT64_C(0xCB77E5CEC8FB6591), + UINT64_C(0x96C15B7D17D879D0), UINT64_C(0x5DAC31EC5D3972EF), + UINT64_C(0x4B3CC1762970C9ED), UINT64_C(0x8051ABE76391C2D2), + UINT64_C(0xDDE71554BCB2DE93), UINT64_C(0x168A7FC5F653D5AC), + UINT64_C(0x678B683303F5E611), UINT64_C(0xACE602A24914ED2E), + UINT64_C(0xF150BC119637F16F), UINT64_C(0x3A3DD680DCD6FA50), + UINT64_C(0x964C9C5256D54E87), UINT64_C(0x5D21F6C31C3445B8), + UINT64_C(0x00974870C31759F9), UINT64_C(0xCBFA22E189F652C6), + UINT64_C(0xBAFB35177C50617B), UINT64_C(0x71965F8636B16A44), + UINT64_C(0x2C20E135E9927605), UINT64_C(0xE74D8BA4A3737D3A), + UINT64_C(0xE2BBF77CAE758C71), UINT64_C(0x29D69DEDE494874E), + UINT64_C(0x7460235E3BB79B0F), UINT64_C(0xBF0D49CF71569030), + UINT64_C(0xCE0C5E3984F0A38D), UINT64_C(0x056134A8CE11A8B2), + UINT64_C(0x58D78A1B1132B4F3), UINT64_C(0x93BAE08A5BD3BFCC), + UINT64_C(0x3FCBAA58D1D00B1B), UINT64_C(0xF4A6C0C99B310024), + UINT64_C(0xA9107E7A44121C65), UINT64_C(0x627D14EB0EF3175A), + UINT64_C(0x137C031DFB5524E7), UINT64_C(0xD811698CB1B42FD8), + UINT64_C(0x85A7D73F6E973399), UINT64_C(0x4ECABDAE247638A6), + UINT64_C(0x585A4D34503F83A4), UINT64_C(0x933727A51ADE889B), + UINT64_C(0xCE819916C5FD94DA), UINT64_C(0x05ECF3878F1C9FE5), + UINT64_C(0x74EDE4717ABAAC58), UINT64_C(0xBF808EE0305BA767), + UINT64_C(0xE2363053EF78BB26), UINT64_C(0x295B5AC2A599B019), + UINT64_C(0x852A10102F9A04CE), UINT64_C(0x4E477A81657B0FF1), + UINT64_C(0x13F1C432BA5813B0), UINT64_C(0xD89CAEA3F0B9188F), + UINT64_C(0xA99DB955051F2B32), UINT64_C(0x62F0D3C44FFE200D), + UINT64_C(0x3F466D7790DD3C4C), UINT64_C(0xF42B07E6DA3C3773), + UINT64_C(0x13668C42794F4A49), UINT64_C(0xD80BE6D333AE4176), + UINT64_C(0x85BD5860EC8D5D37), UINT64_C(0x4ED032F1A66C5608), + UINT64_C(0x3FD1250753CA65B5), UINT64_C(0xF4BC4F96192B6E8A), + UINT64_C(0xA90AF125C60872CB), UINT64_C(0x62679BB48CE979F4), + UINT64_C(0xCE16D16606EACD23), UINT64_C(0x057BBBF74C0BC61C), + UINT64_C(0x58CD05449328DA5D), UINT64_C(0x93A06FD5D9C9D162), + UINT64_C(0xE2A178232C6FE2DF), UINT64_C(0x29CC12B2668EE9E0), + UINT64_C(0x747AAC01B9ADF5A1), UINT64_C(0xBF17C690F34CFE9E), + UINT64_C(0xA987360A8705459C), UINT64_C(0x62EA5C9BCDE44EA3), + UINT64_C(0x3F5CE22812C752E2), UINT64_C(0xF43188B9582659DD), + UINT64_C(0x85309F4FAD806A60), UINT64_C(0x4E5DF5DEE761615F), + UINT64_C(0x13EB4B6D38427D1E), UINT64_C(0xD88621FC72A37621), + UINT64_C(0x74F76B2EF8A0C2F6), UINT64_C(0xBF9A01BFB241C9C9), + UINT64_C(0xE22CBF0C6D62D588), UINT64_C(0x2941D59D2783DEB7), + UINT64_C(0x5840C26BD225ED0A), UINT64_C(0x932DA8FA98C4E635), + UINT64_C(0xCE9B164947E7FA74), UINT64_C(0x05F67CD80D06F14B), + UINT64_C(0xC477EFF95CEB18E3), UINT64_C(0x0F1A8568160A13DC), + UINT64_C(0x52AC3BDBC9290F9D), UINT64_C(0x99C1514A83C804A2), + UINT64_C(0xE8C046BC766E371F), UINT64_C(0x23AD2C2D3C8F3C20), + UINT64_C(0x7E1B929EE3AC2061), UINT64_C(0xB576F80FA94D2B5E), + UINT64_C(0x1907B2DD234E9F89), UINT64_C(0xD26AD84C69AF94B6), + UINT64_C(0x8FDC66FFB68C88F7), UINT64_C(0x44B10C6EFC6D83C8), + UINT64_C(0x35B01B9809CBB075), UINT64_C(0xFEDD7109432ABB4A), + UINT64_C(0xA36BCFBA9C09A70B), UINT64_C(0x6806A52BD6E8AC34), + UINT64_C(0x7E9655B1A2A11736), UINT64_C(0xB5FB3F20E8401C09), + UINT64_C(0xE84D819337630048), UINT64_C(0x2320EB027D820B77), + UINT64_C(0x5221FCF4882438CA), UINT64_C(0x994C9665C2C533F5), + UINT64_C(0xC4FA28D61DE62FB4), UINT64_C(0x0F9742475707248B), + UINT64_C(0xA3E60895DD04905C), UINT64_C(0x688B620497E59B63), + UINT64_C(0x353DDCB748C68722), UINT64_C(0xFE50B62602278C1D), + UINT64_C(0x8F51A1D0F781BFA0), UINT64_C(0x443CCB41BD60B49F), + UINT64_C(0x198A75F26243A8DE), UINT64_C(0xD2E71F6328A2A3E1), + UINT64_C(0x35AA94C78BD1DEDB), UINT64_C(0xFEC7FE56C130D5E4), + UINT64_C(0xA37140E51E13C9A5), UINT64_C(0x681C2A7454F2C29A), + UINT64_C(0x191D3D82A154F127), UINT64_C(0xD2705713EBB5FA18), + UINT64_C(0x8FC6E9A03496E659), UINT64_C(0x44AB83317E77ED66), + UINT64_C(0xE8DAC9E3F47459B1), UINT64_C(0x23B7A372BE95528E), + UINT64_C(0x7E011DC161B64ECF), UINT64_C(0xB56C77502B5745F0), + UINT64_C(0xC46D60A6DEF1764D), UINT64_C(0x0F000A3794107D72), + UINT64_C(0x52B6B4844B336133), UINT64_C(0x99DBDE1501D26A0C), + UINT64_C(0x8F4B2E8F759BD10E), UINT64_C(0x4426441E3F7ADA31), + UINT64_C(0x1990FAADE059C670), UINT64_C(0xD2FD903CAAB8CD4F), + UINT64_C(0xA3FC87CA5F1EFEF2), UINT64_C(0x6891ED5B15FFF5CD), + UINT64_C(0x352753E8CADCE98C), UINT64_C(0xFE4A3979803DE2B3), + UINT64_C(0x523B73AB0A3E5664), UINT64_C(0x9956193A40DF5D5B), + UINT64_C(0xC4E0A7899FFC411A), UINT64_C(0x0F8DCD18D51D4A25), + UINT64_C(0x7E8CDAEE20BB7998), UINT64_C(0xB5E1B07F6A5A72A7), + UINT64_C(0xE8570ECCB5796EE6), UINT64_C(0x233A645DFF9865D9), + UINT64_C(0x26CC1885F29E9492), UINT64_C(0xEDA17214B87F9FAD), + UINT64_C(0xB017CCA7675C83EC), UINT64_C(0x7B7AA6362DBD88D3), + UINT64_C(0x0A7BB1C0D81BBB6E), UINT64_C(0xC116DB5192FAB051), + UINT64_C(0x9CA065E24DD9AC10), UINT64_C(0x57CD0F730738A72F), + UINT64_C(0xFBBC45A18D3B13F8), UINT64_C(0x30D12F30C7DA18C7), + UINT64_C(0x6D67918318F90486), UINT64_C(0xA60AFB1252180FB9), + UINT64_C(0xD70BECE4A7BE3C04), UINT64_C(0x1C668675ED5F373B), + UINT64_C(0x41D038C6327C2B7A), UINT64_C(0x8ABD5257789D2045), + UINT64_C(0x9C2DA2CD0CD49B47), UINT64_C(0x5740C85C46359078), + UINT64_C(0x0AF676EF99168C39), UINT64_C(0xC19B1C7ED3F78706), + UINT64_C(0xB09A0B882651B4BB), UINT64_C(0x7BF761196CB0BF84), + UINT64_C(0x2641DFAAB393A3C5), UINT64_C(0xED2CB53BF972A8FA), + UINT64_C(0x415DFFE973711C2D), UINT64_C(0x8A30957839901712), + UINT64_C(0xD7862BCBE6B30B53), UINT64_C(0x1CEB415AAC52006C), + UINT64_C(0x6DEA56AC59F433D1), UINT64_C(0xA6873C3D131538EE), + UINT64_C(0xFB31828ECC3624AF), UINT64_C(0x305CE81F86D72F90), + UINT64_C(0xD71163BB25A452AA), UINT64_C(0x1C7C092A6F455995), + UINT64_C(0x41CAB799B06645D4), UINT64_C(0x8AA7DD08FA874EEB), + UINT64_C(0xFBA6CAFE0F217D56), UINT64_C(0x30CBA06F45C07669), + UINT64_C(0x6D7D1EDC9AE36A28), UINT64_C(0xA610744DD0026117), + UINT64_C(0x0A613E9F5A01D5C0), UINT64_C(0xC10C540E10E0DEFF), + UINT64_C(0x9CBAEABDCFC3C2BE), UINT64_C(0x57D7802C8522C981), + UINT64_C(0x26D697DA7084FA3C), UINT64_C(0xEDBBFD4B3A65F103), + UINT64_C(0xB00D43F8E546ED42), UINT64_C(0x7B602969AFA7E67D), + UINT64_C(0x6DF0D9F3DBEE5D7F), UINT64_C(0xA69DB362910F5640), + UINT64_C(0xFB2B0DD14E2C4A01), UINT64_C(0x3046674004CD413E), + UINT64_C(0x414770B6F16B7283), UINT64_C(0x8A2A1A27BB8A79BC), + UINT64_C(0xD79CA49464A965FD), UINT64_C(0x1CF1CE052E486EC2), + UINT64_C(0xB08084D7A44BDA15), UINT64_C(0x7BEDEE46EEAAD12A), + UINT64_C(0x265B50F53189CD6B), UINT64_C(0xED363A647B68C654), + UINT64_C(0x9C372D928ECEF5E9), UINT64_C(0x575A4703C42FFED6), + UINT64_C(0x0AECF9B01B0CE297), UINT64_C(0xC181932151EDE9A8) + }, { + UINT64_C(0x0000000000000000), UINT64_C(0xDCA12C225E8AEE1D), + UINT64_C(0xB8435944BC14DD3B), UINT64_C(0x64E27566E29E3326), + UINT64_C(0x7087B2887829BA77), UINT64_C(0xAC269EAA26A3546A), + UINT64_C(0xC8C4EBCCC43D674C), UINT64_C(0x1465C7EE9AB78951), + UINT64_C(0xE00E6511F15274EF), UINT64_C(0x3CAF4933AFD89AF2), + UINT64_C(0x584D3C554D46A9D4), UINT64_C(0x84EC107713CC47C9), + UINT64_C(0x9089D799897BCE98), UINT64_C(0x4C28FBBBD7F12085), + UINT64_C(0x28CA8EDD356F13A3), UINT64_C(0xF46BA2FF6BE5FDBE), + UINT64_C(0x4503C48DC90A304C), UINT64_C(0x99A2E8AF9780DE51), + UINT64_C(0xFD409DC9751EED77), UINT64_C(0x21E1B1EB2B94036A), + UINT64_C(0x35847605B1238A3B), UINT64_C(0xE9255A27EFA96426), + UINT64_C(0x8DC72F410D375700), UINT64_C(0x5166036353BDB91D), + UINT64_C(0xA50DA19C385844A3), UINT64_C(0x79AC8DBE66D2AABE), + UINT64_C(0x1D4EF8D8844C9998), UINT64_C(0xC1EFD4FADAC67785), + UINT64_C(0xD58A13144071FED4), UINT64_C(0x092B3F361EFB10C9), + UINT64_C(0x6DC94A50FC6523EF), UINT64_C(0xB1686672A2EFCDF2), + UINT64_C(0x8A06881B93156098), UINT64_C(0x56A7A439CD9F8E85), + UINT64_C(0x3245D15F2F01BDA3), UINT64_C(0xEEE4FD7D718B53BE), + UINT64_C(0xFA813A93EB3CDAEF), UINT64_C(0x262016B1B5B634F2), + UINT64_C(0x42C263D7572807D4), UINT64_C(0x9E634FF509A2E9C9), + UINT64_C(0x6A08ED0A62471477), UINT64_C(0xB6A9C1283CCDFA6A), + UINT64_C(0xD24BB44EDE53C94C), UINT64_C(0x0EEA986C80D92751), + UINT64_C(0x1A8F5F821A6EAE00), UINT64_C(0xC62E73A044E4401D), + UINT64_C(0xA2CC06C6A67A733B), UINT64_C(0x7E6D2AE4F8F09D26), + UINT64_C(0xCF054C965A1F50D4), UINT64_C(0x13A460B40495BEC9), + UINT64_C(0x774615D2E60B8DEF), UINT64_C(0xABE739F0B88163F2), + UINT64_C(0xBF82FE1E2236EAA3), UINT64_C(0x6323D23C7CBC04BE), + UINT64_C(0x07C1A75A9E223798), UINT64_C(0xDB608B78C0A8D985), + UINT64_C(0x2F0B2987AB4D243B), UINT64_C(0xF3AA05A5F5C7CA26), + UINT64_C(0x974870C31759F900), UINT64_C(0x4BE95CE149D3171D), + UINT64_C(0x5F8C9B0FD3649E4C), UINT64_C(0x832DB72D8DEE7051), + UINT64_C(0xE7CFC24B6F704377), UINT64_C(0x3B6EEE6931FAAD6A), + UINT64_C(0x91131E980D8418A2), UINT64_C(0x4DB232BA530EF6BF), + UINT64_C(0x295047DCB190C599), UINT64_C(0xF5F16BFEEF1A2B84), + UINT64_C(0xE194AC1075ADA2D5), UINT64_C(0x3D3580322B274CC8), + UINT64_C(0x59D7F554C9B97FEE), UINT64_C(0x8576D976973391F3), + UINT64_C(0x711D7B89FCD66C4D), UINT64_C(0xADBC57ABA25C8250), + UINT64_C(0xC95E22CD40C2B176), UINT64_C(0x15FF0EEF1E485F6B), + UINT64_C(0x019AC90184FFD63A), UINT64_C(0xDD3BE523DA753827), + UINT64_C(0xB9D9904538EB0B01), UINT64_C(0x6578BC676661E51C), + UINT64_C(0xD410DA15C48E28EE), UINT64_C(0x08B1F6379A04C6F3), + UINT64_C(0x6C538351789AF5D5), UINT64_C(0xB0F2AF7326101BC8), + UINT64_C(0xA497689DBCA79299), UINT64_C(0x783644BFE22D7C84), + UINT64_C(0x1CD431D900B34FA2), UINT64_C(0xC0751DFB5E39A1BF), + UINT64_C(0x341EBF0435DC5C01), UINT64_C(0xE8BF93266B56B21C), + UINT64_C(0x8C5DE64089C8813A), UINT64_C(0x50FCCA62D7426F27), + UINT64_C(0x44990D8C4DF5E676), UINT64_C(0x983821AE137F086B), + UINT64_C(0xFCDA54C8F1E13B4D), UINT64_C(0x207B78EAAF6BD550), + UINT64_C(0x1B1596839E91783A), UINT64_C(0xC7B4BAA1C01B9627), + UINT64_C(0xA356CFC72285A501), UINT64_C(0x7FF7E3E57C0F4B1C), + UINT64_C(0x6B92240BE6B8C24D), UINT64_C(0xB7330829B8322C50), + UINT64_C(0xD3D17D4F5AAC1F76), UINT64_C(0x0F70516D0426F16B), + UINT64_C(0xFB1BF3926FC30CD5), UINT64_C(0x27BADFB03149E2C8), + UINT64_C(0x4358AAD6D3D7D1EE), UINT64_C(0x9FF986F48D5D3FF3), + UINT64_C(0x8B9C411A17EAB6A2), UINT64_C(0x573D6D38496058BF), + UINT64_C(0x33DF185EABFE6B99), UINT64_C(0xEF7E347CF5748584), + UINT64_C(0x5E16520E579B4876), UINT64_C(0x82B77E2C0911A66B), + UINT64_C(0xE6550B4AEB8F954D), UINT64_C(0x3AF42768B5057B50), + UINT64_C(0x2E91E0862FB2F201), UINT64_C(0xF230CCA471381C1C), + UINT64_C(0x96D2B9C293A62F3A), UINT64_C(0x4A7395E0CD2CC127), + UINT64_C(0xBE18371FA6C93C99), UINT64_C(0x62B91B3DF843D284), + UINT64_C(0x065B6E5B1ADDE1A2), UINT64_C(0xDAFA427944570FBF), + UINT64_C(0xCE9F8597DEE086EE), UINT64_C(0x123EA9B5806A68F3), + UINT64_C(0x76DCDCD362F45BD5), UINT64_C(0xAA7DF0F13C7EB5C8), + UINT64_C(0xA739329F30A7E9D6), UINT64_C(0x7B981EBD6E2D07CB), + UINT64_C(0x1F7A6BDB8CB334ED), UINT64_C(0xC3DB47F9D239DAF0), + UINT64_C(0xD7BE8017488E53A1), UINT64_C(0x0B1FAC351604BDBC), + UINT64_C(0x6FFDD953F49A8E9A), UINT64_C(0xB35CF571AA106087), + UINT64_C(0x4737578EC1F59D39), UINT64_C(0x9B967BAC9F7F7324), + UINT64_C(0xFF740ECA7DE14002), UINT64_C(0x23D522E8236BAE1F), + UINT64_C(0x37B0E506B9DC274E), UINT64_C(0xEB11C924E756C953), + UINT64_C(0x8FF3BC4205C8FA75), UINT64_C(0x535290605B421468), + UINT64_C(0xE23AF612F9ADD99A), UINT64_C(0x3E9BDA30A7273787), + UINT64_C(0x5A79AF5645B904A1), UINT64_C(0x86D883741B33EABC), + UINT64_C(0x92BD449A818463ED), UINT64_C(0x4E1C68B8DF0E8DF0), + UINT64_C(0x2AFE1DDE3D90BED6), UINT64_C(0xF65F31FC631A50CB), + UINT64_C(0x0234930308FFAD75), UINT64_C(0xDE95BF2156754368), + UINT64_C(0xBA77CA47B4EB704E), UINT64_C(0x66D6E665EA619E53), + UINT64_C(0x72B3218B70D61702), UINT64_C(0xAE120DA92E5CF91F), + UINT64_C(0xCAF078CFCCC2CA39), UINT64_C(0x165154ED92482424), + UINT64_C(0x2D3FBA84A3B2894E), UINT64_C(0xF19E96A6FD386753), + UINT64_C(0x957CE3C01FA65475), UINT64_C(0x49DDCFE2412CBA68), + UINT64_C(0x5DB8080CDB9B3339), UINT64_C(0x8119242E8511DD24), + UINT64_C(0xE5FB5148678FEE02), UINT64_C(0x395A7D6A3905001F), + UINT64_C(0xCD31DF9552E0FDA1), UINT64_C(0x1190F3B70C6A13BC), + UINT64_C(0x757286D1EEF4209A), UINT64_C(0xA9D3AAF3B07ECE87), + UINT64_C(0xBDB66D1D2AC947D6), UINT64_C(0x6117413F7443A9CB), + UINT64_C(0x05F5345996DD9AED), UINT64_C(0xD954187BC85774F0), + UINT64_C(0x683C7E096AB8B902), UINT64_C(0xB49D522B3432571F), + UINT64_C(0xD07F274DD6AC6439), UINT64_C(0x0CDE0B6F88268A24), + UINT64_C(0x18BBCC8112910375), UINT64_C(0xC41AE0A34C1BED68), + UINT64_C(0xA0F895C5AE85DE4E), UINT64_C(0x7C59B9E7F00F3053), + UINT64_C(0x88321B189BEACDED), UINT64_C(0x5493373AC56023F0), + UINT64_C(0x3071425C27FE10D6), UINT64_C(0xECD06E7E7974FECB), + UINT64_C(0xF8B5A990E3C3779A), UINT64_C(0x241485B2BD499987), + UINT64_C(0x40F6F0D45FD7AAA1), UINT64_C(0x9C57DCF6015D44BC), + UINT64_C(0x362A2C073D23F174), UINT64_C(0xEA8B002563A91F69), + UINT64_C(0x8E69754381372C4F), UINT64_C(0x52C85961DFBDC252), + UINT64_C(0x46AD9E8F450A4B03), UINT64_C(0x9A0CB2AD1B80A51E), + UINT64_C(0xFEEEC7CBF91E9638), UINT64_C(0x224FEBE9A7947825), + UINT64_C(0xD6244916CC71859B), UINT64_C(0x0A85653492FB6B86), + UINT64_C(0x6E671052706558A0), UINT64_C(0xB2C63C702EEFB6BD), + UINT64_C(0xA6A3FB9EB4583FEC), UINT64_C(0x7A02D7BCEAD2D1F1), + UINT64_C(0x1EE0A2DA084CE2D7), UINT64_C(0xC2418EF856C60CCA), + UINT64_C(0x7329E88AF429C138), UINT64_C(0xAF88C4A8AAA32F25), + UINT64_C(0xCB6AB1CE483D1C03), UINT64_C(0x17CB9DEC16B7F21E), + UINT64_C(0x03AE5A028C007B4F), UINT64_C(0xDF0F7620D28A9552), + UINT64_C(0xBBED03463014A674), UINT64_C(0x674C2F646E9E4869), + UINT64_C(0x93278D9B057BB5D7), UINT64_C(0x4F86A1B95BF15BCA), + UINT64_C(0x2B64D4DFB96F68EC), UINT64_C(0xF7C5F8FDE7E586F1), + UINT64_C(0xE3A03F137D520FA0), UINT64_C(0x3F01133123D8E1BD), + UINT64_C(0x5BE36657C146D29B), UINT64_C(0x87424A759FCC3C86), + UINT64_C(0xBC2CA41CAE3691EC), UINT64_C(0x608D883EF0BC7FF1), + UINT64_C(0x046FFD5812224CD7), UINT64_C(0xD8CED17A4CA8A2CA), + UINT64_C(0xCCAB1694D61F2B9B), UINT64_C(0x100A3AB68895C586), + UINT64_C(0x74E84FD06A0BF6A0), UINT64_C(0xA84963F2348118BD), + UINT64_C(0x5C22C10D5F64E503), UINT64_C(0x8083ED2F01EE0B1E), + UINT64_C(0xE4619849E3703838), UINT64_C(0x38C0B46BBDFAD625), + UINT64_C(0x2CA57385274D5F74), UINT64_C(0xF0045FA779C7B169), + UINT64_C(0x94E62AC19B59824F), UINT64_C(0x484706E3C5D36C52), + UINT64_C(0xF92F6091673CA1A0), UINT64_C(0x258E4CB339B64FBD), + UINT64_C(0x416C39D5DB287C9B), UINT64_C(0x9DCD15F785A29286), + UINT64_C(0x89A8D2191F151BD7), UINT64_C(0x5509FE3B419FF5CA), + UINT64_C(0x31EB8B5DA301C6EC), UINT64_C(0xED4AA77FFD8B28F1), + UINT64_C(0x19210580966ED54F), UINT64_C(0xC58029A2C8E43B52), + UINT64_C(0xA1625CC42A7A0874), UINT64_C(0x7DC370E674F0E669), + UINT64_C(0x69A6B708EE476F38), UINT64_C(0xB5079B2AB0CD8125), + UINT64_C(0xD1E5EE4C5253B203), UINT64_C(0x0D44C26E0CD95C1E) + } +}; diff --git a/src/liblzma/check/crc64_table_le.h b/src/liblzma/check/crc64_table_le.h new file mode 100644 index 0000000..1196b31 --- /dev/null +++ b/src/liblzma/check/crc64_table_le.h @@ -0,0 +1,521 @@ +/* This file has been automatically generated by crc64_tablegen.c. */ + +const uint64_t lzma_crc64_table[4][256] = { + { + UINT64_C(0x0000000000000000), UINT64_C(0xB32E4CBE03A75F6F), + UINT64_C(0xF4843657A840A05B), UINT64_C(0x47AA7AE9ABE7FF34), + UINT64_C(0x7BD0C384FF8F5E33), UINT64_C(0xC8FE8F3AFC28015C), + UINT64_C(0x8F54F5D357CFFE68), UINT64_C(0x3C7AB96D5468A107), + UINT64_C(0xF7A18709FF1EBC66), UINT64_C(0x448FCBB7FCB9E309), + UINT64_C(0x0325B15E575E1C3D), UINT64_C(0xB00BFDE054F94352), + UINT64_C(0x8C71448D0091E255), UINT64_C(0x3F5F08330336BD3A), + UINT64_C(0x78F572DAA8D1420E), UINT64_C(0xCBDB3E64AB761D61), + UINT64_C(0x7D9BA13851336649), UINT64_C(0xCEB5ED8652943926), + UINT64_C(0x891F976FF973C612), UINT64_C(0x3A31DBD1FAD4997D), + UINT64_C(0x064B62BCAEBC387A), UINT64_C(0xB5652E02AD1B6715), + UINT64_C(0xF2CF54EB06FC9821), UINT64_C(0x41E11855055BC74E), + UINT64_C(0x8A3A2631AE2DDA2F), UINT64_C(0x39146A8FAD8A8540), + UINT64_C(0x7EBE1066066D7A74), UINT64_C(0xCD905CD805CA251B), + UINT64_C(0xF1EAE5B551A2841C), UINT64_C(0x42C4A90B5205DB73), + UINT64_C(0x056ED3E2F9E22447), UINT64_C(0xB6409F5CFA457B28), + UINT64_C(0xFB374270A266CC92), UINT64_C(0x48190ECEA1C193FD), + UINT64_C(0x0FB374270A266CC9), UINT64_C(0xBC9D3899098133A6), + UINT64_C(0x80E781F45DE992A1), UINT64_C(0x33C9CD4A5E4ECDCE), + UINT64_C(0x7463B7A3F5A932FA), UINT64_C(0xC74DFB1DF60E6D95), + UINT64_C(0x0C96C5795D7870F4), UINT64_C(0xBFB889C75EDF2F9B), + UINT64_C(0xF812F32EF538D0AF), UINT64_C(0x4B3CBF90F69F8FC0), + UINT64_C(0x774606FDA2F72EC7), UINT64_C(0xC4684A43A15071A8), + UINT64_C(0x83C230AA0AB78E9C), UINT64_C(0x30EC7C140910D1F3), + UINT64_C(0x86ACE348F355AADB), UINT64_C(0x3582AFF6F0F2F5B4), + UINT64_C(0x7228D51F5B150A80), UINT64_C(0xC10699A158B255EF), + UINT64_C(0xFD7C20CC0CDAF4E8), UINT64_C(0x4E526C720F7DAB87), + UINT64_C(0x09F8169BA49A54B3), UINT64_C(0xBAD65A25A73D0BDC), + UINT64_C(0x710D64410C4B16BD), UINT64_C(0xC22328FF0FEC49D2), + UINT64_C(0x85895216A40BB6E6), UINT64_C(0x36A71EA8A7ACE989), + UINT64_C(0x0ADDA7C5F3C4488E), UINT64_C(0xB9F3EB7BF06317E1), + UINT64_C(0xFE5991925B84E8D5), UINT64_C(0x4D77DD2C5823B7BA), + UINT64_C(0x64B62BCAEBC387A1), UINT64_C(0xD7986774E864D8CE), + UINT64_C(0x90321D9D438327FA), UINT64_C(0x231C512340247895), + UINT64_C(0x1F66E84E144CD992), UINT64_C(0xAC48A4F017EB86FD), + UINT64_C(0xEBE2DE19BC0C79C9), UINT64_C(0x58CC92A7BFAB26A6), + UINT64_C(0x9317ACC314DD3BC7), UINT64_C(0x2039E07D177A64A8), + UINT64_C(0x67939A94BC9D9B9C), UINT64_C(0xD4BDD62ABF3AC4F3), + UINT64_C(0xE8C76F47EB5265F4), UINT64_C(0x5BE923F9E8F53A9B), + UINT64_C(0x1C4359104312C5AF), UINT64_C(0xAF6D15AE40B59AC0), + UINT64_C(0x192D8AF2BAF0E1E8), UINT64_C(0xAA03C64CB957BE87), + UINT64_C(0xEDA9BCA512B041B3), UINT64_C(0x5E87F01B11171EDC), + UINT64_C(0x62FD4976457FBFDB), UINT64_C(0xD1D305C846D8E0B4), + UINT64_C(0x96797F21ED3F1F80), UINT64_C(0x2557339FEE9840EF), + UINT64_C(0xEE8C0DFB45EE5D8E), UINT64_C(0x5DA24145464902E1), + UINT64_C(0x1A083BACEDAEFDD5), UINT64_C(0xA9267712EE09A2BA), + UINT64_C(0x955CCE7FBA6103BD), UINT64_C(0x267282C1B9C65CD2), + UINT64_C(0x61D8F8281221A3E6), UINT64_C(0xD2F6B4961186FC89), + UINT64_C(0x9F8169BA49A54B33), UINT64_C(0x2CAF25044A02145C), + UINT64_C(0x6B055FEDE1E5EB68), UINT64_C(0xD82B1353E242B407), + UINT64_C(0xE451AA3EB62A1500), UINT64_C(0x577FE680B58D4A6F), + UINT64_C(0x10D59C691E6AB55B), UINT64_C(0xA3FBD0D71DCDEA34), + UINT64_C(0x6820EEB3B6BBF755), UINT64_C(0xDB0EA20DB51CA83A), + UINT64_C(0x9CA4D8E41EFB570E), UINT64_C(0x2F8A945A1D5C0861), + UINT64_C(0x13F02D374934A966), UINT64_C(0xA0DE61894A93F609), + UINT64_C(0xE7741B60E174093D), UINT64_C(0x545A57DEE2D35652), + UINT64_C(0xE21AC88218962D7A), UINT64_C(0x5134843C1B317215), + UINT64_C(0x169EFED5B0D68D21), UINT64_C(0xA5B0B26BB371D24E), + UINT64_C(0x99CA0B06E7197349), UINT64_C(0x2AE447B8E4BE2C26), + UINT64_C(0x6D4E3D514F59D312), UINT64_C(0xDE6071EF4CFE8C7D), + UINT64_C(0x15BB4F8BE788911C), UINT64_C(0xA6950335E42FCE73), + UINT64_C(0xE13F79DC4FC83147), UINT64_C(0x521135624C6F6E28), + UINT64_C(0x6E6B8C0F1807CF2F), UINT64_C(0xDD45C0B11BA09040), + UINT64_C(0x9AEFBA58B0476F74), UINT64_C(0x29C1F6E6B3E0301B), + UINT64_C(0xC96C5795D7870F42), UINT64_C(0x7A421B2BD420502D), + UINT64_C(0x3DE861C27FC7AF19), UINT64_C(0x8EC62D7C7C60F076), + UINT64_C(0xB2BC941128085171), UINT64_C(0x0192D8AF2BAF0E1E), + UINT64_C(0x4638A2468048F12A), UINT64_C(0xF516EEF883EFAE45), + UINT64_C(0x3ECDD09C2899B324), UINT64_C(0x8DE39C222B3EEC4B), + UINT64_C(0xCA49E6CB80D9137F), UINT64_C(0x7967AA75837E4C10), + UINT64_C(0x451D1318D716ED17), UINT64_C(0xF6335FA6D4B1B278), + UINT64_C(0xB199254F7F564D4C), UINT64_C(0x02B769F17CF11223), + UINT64_C(0xB4F7F6AD86B4690B), UINT64_C(0x07D9BA1385133664), + UINT64_C(0x4073C0FA2EF4C950), UINT64_C(0xF35D8C442D53963F), + UINT64_C(0xCF273529793B3738), UINT64_C(0x7C0979977A9C6857), + UINT64_C(0x3BA3037ED17B9763), UINT64_C(0x888D4FC0D2DCC80C), + UINT64_C(0x435671A479AAD56D), UINT64_C(0xF0783D1A7A0D8A02), + UINT64_C(0xB7D247F3D1EA7536), UINT64_C(0x04FC0B4DD24D2A59), + UINT64_C(0x3886B22086258B5E), UINT64_C(0x8BA8FE9E8582D431), + UINT64_C(0xCC0284772E652B05), UINT64_C(0x7F2CC8C92DC2746A), + UINT64_C(0x325B15E575E1C3D0), UINT64_C(0x8175595B76469CBF), + UINT64_C(0xC6DF23B2DDA1638B), UINT64_C(0x75F16F0CDE063CE4), + UINT64_C(0x498BD6618A6E9DE3), UINT64_C(0xFAA59ADF89C9C28C), + UINT64_C(0xBD0FE036222E3DB8), UINT64_C(0x0E21AC88218962D7), + UINT64_C(0xC5FA92EC8AFF7FB6), UINT64_C(0x76D4DE52895820D9), + UINT64_C(0x317EA4BB22BFDFED), UINT64_C(0x8250E80521188082), + UINT64_C(0xBE2A516875702185), UINT64_C(0x0D041DD676D77EEA), + UINT64_C(0x4AAE673FDD3081DE), UINT64_C(0xF9802B81DE97DEB1), + UINT64_C(0x4FC0B4DD24D2A599), UINT64_C(0xFCEEF8632775FAF6), + UINT64_C(0xBB44828A8C9205C2), UINT64_C(0x086ACE348F355AAD), + UINT64_C(0x34107759DB5DFBAA), UINT64_C(0x873E3BE7D8FAA4C5), + UINT64_C(0xC094410E731D5BF1), UINT64_C(0x73BA0DB070BA049E), + UINT64_C(0xB86133D4DBCC19FF), UINT64_C(0x0B4F7F6AD86B4690), + UINT64_C(0x4CE50583738CB9A4), UINT64_C(0xFFCB493D702BE6CB), + UINT64_C(0xC3B1F050244347CC), UINT64_C(0x709FBCEE27E418A3), + UINT64_C(0x3735C6078C03E797), UINT64_C(0x841B8AB98FA4B8F8), + UINT64_C(0xADDA7C5F3C4488E3), UINT64_C(0x1EF430E13FE3D78C), + UINT64_C(0x595E4A08940428B8), UINT64_C(0xEA7006B697A377D7), + UINT64_C(0xD60ABFDBC3CBD6D0), UINT64_C(0x6524F365C06C89BF), + UINT64_C(0x228E898C6B8B768B), UINT64_C(0x91A0C532682C29E4), + UINT64_C(0x5A7BFB56C35A3485), UINT64_C(0xE955B7E8C0FD6BEA), + UINT64_C(0xAEFFCD016B1A94DE), UINT64_C(0x1DD181BF68BDCBB1), + UINT64_C(0x21AB38D23CD56AB6), UINT64_C(0x9285746C3F7235D9), + UINT64_C(0xD52F0E859495CAED), UINT64_C(0x6601423B97329582), + UINT64_C(0xD041DD676D77EEAA), UINT64_C(0x636F91D96ED0B1C5), + UINT64_C(0x24C5EB30C5374EF1), UINT64_C(0x97EBA78EC690119E), + UINT64_C(0xAB911EE392F8B099), UINT64_C(0x18BF525D915FEFF6), + UINT64_C(0x5F1528B43AB810C2), UINT64_C(0xEC3B640A391F4FAD), + UINT64_C(0x27E05A6E926952CC), UINT64_C(0x94CE16D091CE0DA3), + UINT64_C(0xD3646C393A29F297), UINT64_C(0x604A2087398EADF8), + UINT64_C(0x5C3099EA6DE60CFF), UINT64_C(0xEF1ED5546E415390), + UINT64_C(0xA8B4AFBDC5A6ACA4), UINT64_C(0x1B9AE303C601F3CB), + UINT64_C(0x56ED3E2F9E224471), UINT64_C(0xE5C372919D851B1E), + UINT64_C(0xA26908783662E42A), UINT64_C(0x114744C635C5BB45), + UINT64_C(0x2D3DFDAB61AD1A42), UINT64_C(0x9E13B115620A452D), + UINT64_C(0xD9B9CBFCC9EDBA19), UINT64_C(0x6A978742CA4AE576), + UINT64_C(0xA14CB926613CF817), UINT64_C(0x1262F598629BA778), + UINT64_C(0x55C88F71C97C584C), UINT64_C(0xE6E6C3CFCADB0723), + UINT64_C(0xDA9C7AA29EB3A624), UINT64_C(0x69B2361C9D14F94B), + UINT64_C(0x2E184CF536F3067F), UINT64_C(0x9D36004B35545910), + UINT64_C(0x2B769F17CF112238), UINT64_C(0x9858D3A9CCB67D57), + UINT64_C(0xDFF2A94067518263), UINT64_C(0x6CDCE5FE64F6DD0C), + UINT64_C(0x50A65C93309E7C0B), UINT64_C(0xE388102D33392364), + UINT64_C(0xA4226AC498DEDC50), UINT64_C(0x170C267A9B79833F), + UINT64_C(0xDCD7181E300F9E5E), UINT64_C(0x6FF954A033A8C131), + UINT64_C(0x28532E49984F3E05), UINT64_C(0x9B7D62F79BE8616A), + UINT64_C(0xA707DB9ACF80C06D), UINT64_C(0x14299724CC279F02), + UINT64_C(0x5383EDCD67C06036), UINT64_C(0xE0ADA17364673F59) + }, { + UINT64_C(0x0000000000000000), UINT64_C(0x54E979925CD0F10D), + UINT64_C(0xA9D2F324B9A1E21A), UINT64_C(0xFD3B8AB6E5711317), + UINT64_C(0xC17D4962DC4DDAB1), UINT64_C(0x959430F0809D2BBC), + UINT64_C(0x68AFBA4665EC38AB), UINT64_C(0x3C46C3D4393CC9A6), + UINT64_C(0x10223DEE1795ABE7), UINT64_C(0x44CB447C4B455AEA), + UINT64_C(0xB9F0CECAAE3449FD), UINT64_C(0xED19B758F2E4B8F0), + UINT64_C(0xD15F748CCBD87156), UINT64_C(0x85B60D1E9708805B), + UINT64_C(0x788D87A87279934C), UINT64_C(0x2C64FE3A2EA96241), + UINT64_C(0x20447BDC2F2B57CE), UINT64_C(0x74AD024E73FBA6C3), + UINT64_C(0x899688F8968AB5D4), UINT64_C(0xDD7FF16ACA5A44D9), + UINT64_C(0xE13932BEF3668D7F), UINT64_C(0xB5D04B2CAFB67C72), + UINT64_C(0x48EBC19A4AC76F65), UINT64_C(0x1C02B80816179E68), + UINT64_C(0x3066463238BEFC29), UINT64_C(0x648F3FA0646E0D24), + UINT64_C(0x99B4B516811F1E33), UINT64_C(0xCD5DCC84DDCFEF3E), + UINT64_C(0xF11B0F50E4F32698), UINT64_C(0xA5F276C2B823D795), + UINT64_C(0x58C9FC745D52C482), UINT64_C(0x0C2085E60182358F), + UINT64_C(0x4088F7B85E56AF9C), UINT64_C(0x14618E2A02865E91), + UINT64_C(0xE95A049CE7F74D86), UINT64_C(0xBDB37D0EBB27BC8B), + UINT64_C(0x81F5BEDA821B752D), UINT64_C(0xD51CC748DECB8420), + UINT64_C(0x28274DFE3BBA9737), UINT64_C(0x7CCE346C676A663A), + UINT64_C(0x50AACA5649C3047B), UINT64_C(0x0443B3C41513F576), + UINT64_C(0xF9783972F062E661), UINT64_C(0xAD9140E0ACB2176C), + UINT64_C(0x91D78334958EDECA), UINT64_C(0xC53EFAA6C95E2FC7), + UINT64_C(0x380570102C2F3CD0), UINT64_C(0x6CEC098270FFCDDD), + UINT64_C(0x60CC8C64717DF852), UINT64_C(0x3425F5F62DAD095F), + UINT64_C(0xC91E7F40C8DC1A48), UINT64_C(0x9DF706D2940CEB45), + UINT64_C(0xA1B1C506AD3022E3), UINT64_C(0xF558BC94F1E0D3EE), + UINT64_C(0x086336221491C0F9), UINT64_C(0x5C8A4FB0484131F4), + UINT64_C(0x70EEB18A66E853B5), UINT64_C(0x2407C8183A38A2B8), + UINT64_C(0xD93C42AEDF49B1AF), UINT64_C(0x8DD53B3C839940A2), + UINT64_C(0xB193F8E8BAA58904), UINT64_C(0xE57A817AE6757809), + UINT64_C(0x18410BCC03046B1E), UINT64_C(0x4CA8725E5FD49A13), + UINT64_C(0x8111EF70BCAD5F38), UINT64_C(0xD5F896E2E07DAE35), + UINT64_C(0x28C31C54050CBD22), UINT64_C(0x7C2A65C659DC4C2F), + UINT64_C(0x406CA61260E08589), UINT64_C(0x1485DF803C307484), + UINT64_C(0xE9BE5536D9416793), UINT64_C(0xBD572CA48591969E), + UINT64_C(0x9133D29EAB38F4DF), UINT64_C(0xC5DAAB0CF7E805D2), + UINT64_C(0x38E121BA129916C5), UINT64_C(0x6C0858284E49E7C8), + UINT64_C(0x504E9BFC77752E6E), UINT64_C(0x04A7E26E2BA5DF63), + UINT64_C(0xF99C68D8CED4CC74), UINT64_C(0xAD75114A92043D79), + UINT64_C(0xA15594AC938608F6), UINT64_C(0xF5BCED3ECF56F9FB), + UINT64_C(0x088767882A27EAEC), UINT64_C(0x5C6E1E1A76F71BE1), + UINT64_C(0x6028DDCE4FCBD247), UINT64_C(0x34C1A45C131B234A), + UINT64_C(0xC9FA2EEAF66A305D), UINT64_C(0x9D135778AABAC150), + UINT64_C(0xB177A9428413A311), UINT64_C(0xE59ED0D0D8C3521C), + UINT64_C(0x18A55A663DB2410B), UINT64_C(0x4C4C23F46162B006), + UINT64_C(0x700AE020585E79A0), UINT64_C(0x24E399B2048E88AD), + UINT64_C(0xD9D81304E1FF9BBA), UINT64_C(0x8D316A96BD2F6AB7), + UINT64_C(0xC19918C8E2FBF0A4), UINT64_C(0x9570615ABE2B01A9), + UINT64_C(0x684BEBEC5B5A12BE), UINT64_C(0x3CA2927E078AE3B3), + UINT64_C(0x00E451AA3EB62A15), UINT64_C(0x540D28386266DB18), + UINT64_C(0xA936A28E8717C80F), UINT64_C(0xFDDFDB1CDBC73902), + UINT64_C(0xD1BB2526F56E5B43), UINT64_C(0x85525CB4A9BEAA4E), + UINT64_C(0x7869D6024CCFB959), UINT64_C(0x2C80AF90101F4854), + UINT64_C(0x10C66C44292381F2), UINT64_C(0x442F15D675F370FF), + UINT64_C(0xB9149F60908263E8), UINT64_C(0xEDFDE6F2CC5292E5), + UINT64_C(0xE1DD6314CDD0A76A), UINT64_C(0xB5341A8691005667), + UINT64_C(0x480F903074714570), UINT64_C(0x1CE6E9A228A1B47D), + UINT64_C(0x20A02A76119D7DDB), UINT64_C(0x744953E44D4D8CD6), + UINT64_C(0x8972D952A83C9FC1), UINT64_C(0xDD9BA0C0F4EC6ECC), + UINT64_C(0xF1FF5EFADA450C8D), UINT64_C(0xA51627688695FD80), + UINT64_C(0x582DADDE63E4EE97), UINT64_C(0x0CC4D44C3F341F9A), + UINT64_C(0x308217980608D63C), UINT64_C(0x646B6E0A5AD82731), + UINT64_C(0x9950E4BCBFA93426), UINT64_C(0xCDB99D2EE379C52B), + UINT64_C(0x90FB71CAD654A0F5), UINT64_C(0xC41208588A8451F8), + UINT64_C(0x392982EE6FF542EF), UINT64_C(0x6DC0FB7C3325B3E2), + UINT64_C(0x518638A80A197A44), UINT64_C(0x056F413A56C98B49), + UINT64_C(0xF854CB8CB3B8985E), UINT64_C(0xACBDB21EEF686953), + UINT64_C(0x80D94C24C1C10B12), UINT64_C(0xD43035B69D11FA1F), + UINT64_C(0x290BBF007860E908), UINT64_C(0x7DE2C69224B01805), + UINT64_C(0x41A405461D8CD1A3), UINT64_C(0x154D7CD4415C20AE), + UINT64_C(0xE876F662A42D33B9), UINT64_C(0xBC9F8FF0F8FDC2B4), + UINT64_C(0xB0BF0A16F97FF73B), UINT64_C(0xE4567384A5AF0636), + UINT64_C(0x196DF93240DE1521), UINT64_C(0x4D8480A01C0EE42C), + UINT64_C(0x71C2437425322D8A), UINT64_C(0x252B3AE679E2DC87), + UINT64_C(0xD810B0509C93CF90), UINT64_C(0x8CF9C9C2C0433E9D), + UINT64_C(0xA09D37F8EEEA5CDC), UINT64_C(0xF4744E6AB23AADD1), + UINT64_C(0x094FC4DC574BBEC6), UINT64_C(0x5DA6BD4E0B9B4FCB), + UINT64_C(0x61E07E9A32A7866D), UINT64_C(0x350907086E777760), + UINT64_C(0xC8328DBE8B066477), UINT64_C(0x9CDBF42CD7D6957A), + UINT64_C(0xD073867288020F69), UINT64_C(0x849AFFE0D4D2FE64), + UINT64_C(0x79A1755631A3ED73), UINT64_C(0x2D480CC46D731C7E), + UINT64_C(0x110ECF10544FD5D8), UINT64_C(0x45E7B682089F24D5), + UINT64_C(0xB8DC3C34EDEE37C2), UINT64_C(0xEC3545A6B13EC6CF), + UINT64_C(0xC051BB9C9F97A48E), UINT64_C(0x94B8C20EC3475583), + UINT64_C(0x698348B826364694), UINT64_C(0x3D6A312A7AE6B799), + UINT64_C(0x012CF2FE43DA7E3F), UINT64_C(0x55C58B6C1F0A8F32), + UINT64_C(0xA8FE01DAFA7B9C25), UINT64_C(0xFC177848A6AB6D28), + UINT64_C(0xF037FDAEA72958A7), UINT64_C(0xA4DE843CFBF9A9AA), + UINT64_C(0x59E50E8A1E88BABD), UINT64_C(0x0D0C771842584BB0), + UINT64_C(0x314AB4CC7B648216), UINT64_C(0x65A3CD5E27B4731B), + UINT64_C(0x989847E8C2C5600C), UINT64_C(0xCC713E7A9E159101), + UINT64_C(0xE015C040B0BCF340), UINT64_C(0xB4FCB9D2EC6C024D), + UINT64_C(0x49C73364091D115A), UINT64_C(0x1D2E4AF655CDE057), + UINT64_C(0x216889226CF129F1), UINT64_C(0x7581F0B03021D8FC), + UINT64_C(0x88BA7A06D550CBEB), UINT64_C(0xDC53039489803AE6), + UINT64_C(0x11EA9EBA6AF9FFCD), UINT64_C(0x4503E72836290EC0), + UINT64_C(0xB8386D9ED3581DD7), UINT64_C(0xECD1140C8F88ECDA), + UINT64_C(0xD097D7D8B6B4257C), UINT64_C(0x847EAE4AEA64D471), + UINT64_C(0x794524FC0F15C766), UINT64_C(0x2DAC5D6E53C5366B), + UINT64_C(0x01C8A3547D6C542A), UINT64_C(0x5521DAC621BCA527), + UINT64_C(0xA81A5070C4CDB630), UINT64_C(0xFCF329E2981D473D), + UINT64_C(0xC0B5EA36A1218E9B), UINT64_C(0x945C93A4FDF17F96), + UINT64_C(0x6967191218806C81), UINT64_C(0x3D8E608044509D8C), + UINT64_C(0x31AEE56645D2A803), UINT64_C(0x65479CF41902590E), + UINT64_C(0x987C1642FC734A19), UINT64_C(0xCC956FD0A0A3BB14), + UINT64_C(0xF0D3AC04999F72B2), UINT64_C(0xA43AD596C54F83BF), + UINT64_C(0x59015F20203E90A8), UINT64_C(0x0DE826B27CEE61A5), + UINT64_C(0x218CD888524703E4), UINT64_C(0x7565A11A0E97F2E9), + UINT64_C(0x885E2BACEBE6E1FE), UINT64_C(0xDCB7523EB73610F3), + UINT64_C(0xE0F191EA8E0AD955), UINT64_C(0xB418E878D2DA2858), + UINT64_C(0x492362CE37AB3B4F), UINT64_C(0x1DCA1B5C6B7BCA42), + UINT64_C(0x5162690234AF5051), UINT64_C(0x058B1090687FA15C), + UINT64_C(0xF8B09A268D0EB24B), UINT64_C(0xAC59E3B4D1DE4346), + UINT64_C(0x901F2060E8E28AE0), UINT64_C(0xC4F659F2B4327BED), + UINT64_C(0x39CDD344514368FA), UINT64_C(0x6D24AAD60D9399F7), + UINT64_C(0x414054EC233AFBB6), UINT64_C(0x15A92D7E7FEA0ABB), + UINT64_C(0xE892A7C89A9B19AC), UINT64_C(0xBC7BDE5AC64BE8A1), + UINT64_C(0x803D1D8EFF772107), UINT64_C(0xD4D4641CA3A7D00A), + UINT64_C(0x29EFEEAA46D6C31D), UINT64_C(0x7D0697381A063210), + UINT64_C(0x712612DE1B84079F), UINT64_C(0x25CF6B4C4754F692), + UINT64_C(0xD8F4E1FAA225E585), UINT64_C(0x8C1D9868FEF51488), + UINT64_C(0xB05B5BBCC7C9DD2E), UINT64_C(0xE4B2222E9B192C23), + UINT64_C(0x1989A8987E683F34), UINT64_C(0x4D60D10A22B8CE39), + UINT64_C(0x61042F300C11AC78), UINT64_C(0x35ED56A250C15D75), + UINT64_C(0xC8D6DC14B5B04E62), UINT64_C(0x9C3FA586E960BF6F), + UINT64_C(0xA0796652D05C76C9), UINT64_C(0xF4901FC08C8C87C4), + UINT64_C(0x09AB957669FD94D3), UINT64_C(0x5D42ECE4352D65DE) + }, { + UINT64_C(0x0000000000000000), UINT64_C(0x3F0BE14A916A6DCB), + UINT64_C(0x7E17C29522D4DB96), UINT64_C(0x411C23DFB3BEB65D), + UINT64_C(0xFC2F852A45A9B72C), UINT64_C(0xC3246460D4C3DAE7), + UINT64_C(0x823847BF677D6CBA), UINT64_C(0xBD33A6F5F6170171), + UINT64_C(0x6A87A57F245D70DD), UINT64_C(0x558C4435B5371D16), + UINT64_C(0x149067EA0689AB4B), UINT64_C(0x2B9B86A097E3C680), + UINT64_C(0x96A8205561F4C7F1), UINT64_C(0xA9A3C11FF09EAA3A), + UINT64_C(0xE8BFE2C043201C67), UINT64_C(0xD7B4038AD24A71AC), + UINT64_C(0xD50F4AFE48BAE1BA), UINT64_C(0xEA04ABB4D9D08C71), + UINT64_C(0xAB18886B6A6E3A2C), UINT64_C(0x94136921FB0457E7), + UINT64_C(0x2920CFD40D135696), UINT64_C(0x162B2E9E9C793B5D), + UINT64_C(0x57370D412FC78D00), UINT64_C(0x683CEC0BBEADE0CB), + UINT64_C(0xBF88EF816CE79167), UINT64_C(0x80830ECBFD8DFCAC), + UINT64_C(0xC19F2D144E334AF1), UINT64_C(0xFE94CC5EDF59273A), + UINT64_C(0x43A76AAB294E264B), UINT64_C(0x7CAC8BE1B8244B80), + UINT64_C(0x3DB0A83E0B9AFDDD), UINT64_C(0x02BB49749AF09016), + UINT64_C(0x38C63AD73E7BDDF1), UINT64_C(0x07CDDB9DAF11B03A), + UINT64_C(0x46D1F8421CAF0667), UINT64_C(0x79DA19088DC56BAC), + UINT64_C(0xC4E9BFFD7BD26ADD), UINT64_C(0xFBE25EB7EAB80716), + UINT64_C(0xBAFE7D685906B14B), UINT64_C(0x85F59C22C86CDC80), + UINT64_C(0x52419FA81A26AD2C), UINT64_C(0x6D4A7EE28B4CC0E7), + UINT64_C(0x2C565D3D38F276BA), UINT64_C(0x135DBC77A9981B71), + UINT64_C(0xAE6E1A825F8F1A00), UINT64_C(0x9165FBC8CEE577CB), + UINT64_C(0xD079D8177D5BC196), UINT64_C(0xEF72395DEC31AC5D), + UINT64_C(0xEDC9702976C13C4B), UINT64_C(0xD2C29163E7AB5180), + UINT64_C(0x93DEB2BC5415E7DD), UINT64_C(0xACD553F6C57F8A16), + UINT64_C(0x11E6F50333688B67), UINT64_C(0x2EED1449A202E6AC), + UINT64_C(0x6FF1379611BC50F1), UINT64_C(0x50FAD6DC80D63D3A), + UINT64_C(0x874ED556529C4C96), UINT64_C(0xB845341CC3F6215D), + UINT64_C(0xF95917C370489700), UINT64_C(0xC652F689E122FACB), + UINT64_C(0x7B61507C1735FBBA), UINT64_C(0x446AB136865F9671), + UINT64_C(0x057692E935E1202C), UINT64_C(0x3A7D73A3A48B4DE7), + UINT64_C(0x718C75AE7CF7BBE2), UINT64_C(0x4E8794E4ED9DD629), + UINT64_C(0x0F9BB73B5E236074), UINT64_C(0x30905671CF490DBF), + UINT64_C(0x8DA3F084395E0CCE), UINT64_C(0xB2A811CEA8346105), + UINT64_C(0xF3B432111B8AD758), UINT64_C(0xCCBFD35B8AE0BA93), + UINT64_C(0x1B0BD0D158AACB3F), UINT64_C(0x2400319BC9C0A6F4), + UINT64_C(0x651C12447A7E10A9), UINT64_C(0x5A17F30EEB147D62), + UINT64_C(0xE72455FB1D037C13), UINT64_C(0xD82FB4B18C6911D8), + UINT64_C(0x9933976E3FD7A785), UINT64_C(0xA6387624AEBDCA4E), + UINT64_C(0xA4833F50344D5A58), UINT64_C(0x9B88DE1AA5273793), + UINT64_C(0xDA94FDC5169981CE), UINT64_C(0xE59F1C8F87F3EC05), + UINT64_C(0x58ACBA7A71E4ED74), UINT64_C(0x67A75B30E08E80BF), + UINT64_C(0x26BB78EF533036E2), UINT64_C(0x19B099A5C25A5B29), + UINT64_C(0xCE049A2F10102A85), UINT64_C(0xF10F7B65817A474E), + UINT64_C(0xB01358BA32C4F113), UINT64_C(0x8F18B9F0A3AE9CD8), + UINT64_C(0x322B1F0555B99DA9), UINT64_C(0x0D20FE4FC4D3F062), + UINT64_C(0x4C3CDD90776D463F), UINT64_C(0x73373CDAE6072BF4), + UINT64_C(0x494A4F79428C6613), UINT64_C(0x7641AE33D3E60BD8), + UINT64_C(0x375D8DEC6058BD85), UINT64_C(0x08566CA6F132D04E), + UINT64_C(0xB565CA530725D13F), UINT64_C(0x8A6E2B19964FBCF4), + UINT64_C(0xCB7208C625F10AA9), UINT64_C(0xF479E98CB49B6762), + UINT64_C(0x23CDEA0666D116CE), UINT64_C(0x1CC60B4CF7BB7B05), + UINT64_C(0x5DDA28934405CD58), UINT64_C(0x62D1C9D9D56FA093), + UINT64_C(0xDFE26F2C2378A1E2), UINT64_C(0xE0E98E66B212CC29), + UINT64_C(0xA1F5ADB901AC7A74), UINT64_C(0x9EFE4CF390C617BF), + UINT64_C(0x9C4505870A3687A9), UINT64_C(0xA34EE4CD9B5CEA62), + UINT64_C(0xE252C71228E25C3F), UINT64_C(0xDD592658B98831F4), + UINT64_C(0x606A80AD4F9F3085), UINT64_C(0x5F6161E7DEF55D4E), + UINT64_C(0x1E7D42386D4BEB13), UINT64_C(0x2176A372FC2186D8), + UINT64_C(0xF6C2A0F82E6BF774), UINT64_C(0xC9C941B2BF019ABF), + UINT64_C(0x88D5626D0CBF2CE2), UINT64_C(0xB7DE83279DD54129), + UINT64_C(0x0AED25D26BC24058), UINT64_C(0x35E6C498FAA82D93), + UINT64_C(0x74FAE74749169BCE), UINT64_C(0x4BF1060DD87CF605), + UINT64_C(0xE318EB5CF9EF77C4), UINT64_C(0xDC130A1668851A0F), + UINT64_C(0x9D0F29C9DB3BAC52), UINT64_C(0xA204C8834A51C199), + UINT64_C(0x1F376E76BC46C0E8), UINT64_C(0x203C8F3C2D2CAD23), + UINT64_C(0x6120ACE39E921B7E), UINT64_C(0x5E2B4DA90FF876B5), + UINT64_C(0x899F4E23DDB20719), UINT64_C(0xB694AF694CD86AD2), + UINT64_C(0xF7888CB6FF66DC8F), UINT64_C(0xC8836DFC6E0CB144), + UINT64_C(0x75B0CB09981BB035), UINT64_C(0x4ABB2A430971DDFE), + UINT64_C(0x0BA7099CBACF6BA3), UINT64_C(0x34ACE8D62BA50668), + UINT64_C(0x3617A1A2B155967E), UINT64_C(0x091C40E8203FFBB5), + UINT64_C(0x4800633793814DE8), UINT64_C(0x770B827D02EB2023), + UINT64_C(0xCA382488F4FC2152), UINT64_C(0xF533C5C265964C99), + UINT64_C(0xB42FE61DD628FAC4), UINT64_C(0x8B2407574742970F), + UINT64_C(0x5C9004DD9508E6A3), UINT64_C(0x639BE59704628B68), + UINT64_C(0x2287C648B7DC3D35), UINT64_C(0x1D8C270226B650FE), + UINT64_C(0xA0BF81F7D0A1518F), UINT64_C(0x9FB460BD41CB3C44), + UINT64_C(0xDEA84362F2758A19), UINT64_C(0xE1A3A228631FE7D2), + UINT64_C(0xDBDED18BC794AA35), UINT64_C(0xE4D530C156FEC7FE), + UINT64_C(0xA5C9131EE54071A3), UINT64_C(0x9AC2F254742A1C68), + UINT64_C(0x27F154A1823D1D19), UINT64_C(0x18FAB5EB135770D2), + UINT64_C(0x59E69634A0E9C68F), UINT64_C(0x66ED777E3183AB44), + UINT64_C(0xB15974F4E3C9DAE8), UINT64_C(0x8E5295BE72A3B723), + UINT64_C(0xCF4EB661C11D017E), UINT64_C(0xF045572B50776CB5), + UINT64_C(0x4D76F1DEA6606DC4), UINT64_C(0x727D1094370A000F), + UINT64_C(0x3361334B84B4B652), UINT64_C(0x0C6AD20115DEDB99), + UINT64_C(0x0ED19B758F2E4B8F), UINT64_C(0x31DA7A3F1E442644), + UINT64_C(0x70C659E0ADFA9019), UINT64_C(0x4FCDB8AA3C90FDD2), + UINT64_C(0xF2FE1E5FCA87FCA3), UINT64_C(0xCDF5FF155BED9168), + UINT64_C(0x8CE9DCCAE8532735), UINT64_C(0xB3E23D8079394AFE), + UINT64_C(0x64563E0AAB733B52), UINT64_C(0x5B5DDF403A195699), + UINT64_C(0x1A41FC9F89A7E0C4), UINT64_C(0x254A1DD518CD8D0F), + UINT64_C(0x9879BB20EEDA8C7E), UINT64_C(0xA7725A6A7FB0E1B5), + UINT64_C(0xE66E79B5CC0E57E8), UINT64_C(0xD96598FF5D643A23), + UINT64_C(0x92949EF28518CC26), UINT64_C(0xAD9F7FB81472A1ED), + UINT64_C(0xEC835C67A7CC17B0), UINT64_C(0xD388BD2D36A67A7B), + UINT64_C(0x6EBB1BD8C0B17B0A), UINT64_C(0x51B0FA9251DB16C1), + UINT64_C(0x10ACD94DE265A09C), UINT64_C(0x2FA73807730FCD57), + UINT64_C(0xF8133B8DA145BCFB), UINT64_C(0xC718DAC7302FD130), + UINT64_C(0x8604F9188391676D), UINT64_C(0xB90F185212FB0AA6), + UINT64_C(0x043CBEA7E4EC0BD7), UINT64_C(0x3B375FED7586661C), + UINT64_C(0x7A2B7C32C638D041), UINT64_C(0x45209D785752BD8A), + UINT64_C(0x479BD40CCDA22D9C), UINT64_C(0x789035465CC84057), + UINT64_C(0x398C1699EF76F60A), UINT64_C(0x0687F7D37E1C9BC1), + UINT64_C(0xBBB45126880B9AB0), UINT64_C(0x84BFB06C1961F77B), + UINT64_C(0xC5A393B3AADF4126), UINT64_C(0xFAA872F93BB52CED), + UINT64_C(0x2D1C7173E9FF5D41), UINT64_C(0x121790397895308A), + UINT64_C(0x530BB3E6CB2B86D7), UINT64_C(0x6C0052AC5A41EB1C), + UINT64_C(0xD133F459AC56EA6D), UINT64_C(0xEE3815133D3C87A6), + UINT64_C(0xAF2436CC8E8231FB), UINT64_C(0x902FD7861FE85C30), + UINT64_C(0xAA52A425BB6311D7), UINT64_C(0x9559456F2A097C1C), + UINT64_C(0xD44566B099B7CA41), UINT64_C(0xEB4E87FA08DDA78A), + UINT64_C(0x567D210FFECAA6FB), UINT64_C(0x6976C0456FA0CB30), + UINT64_C(0x286AE39ADC1E7D6D), UINT64_C(0x176102D04D7410A6), + UINT64_C(0xC0D5015A9F3E610A), UINT64_C(0xFFDEE0100E540CC1), + UINT64_C(0xBEC2C3CFBDEABA9C), UINT64_C(0x81C922852C80D757), + UINT64_C(0x3CFA8470DA97D626), UINT64_C(0x03F1653A4BFDBBED), + UINT64_C(0x42ED46E5F8430DB0), UINT64_C(0x7DE6A7AF6929607B), + UINT64_C(0x7F5DEEDBF3D9F06D), UINT64_C(0x40560F9162B39DA6), + UINT64_C(0x014A2C4ED10D2BFB), UINT64_C(0x3E41CD0440674630), + UINT64_C(0x83726BF1B6704741), UINT64_C(0xBC798ABB271A2A8A), + UINT64_C(0xFD65A96494A49CD7), UINT64_C(0xC26E482E05CEF11C), + UINT64_C(0x15DA4BA4D78480B0), UINT64_C(0x2AD1AAEE46EEED7B), + UINT64_C(0x6BCD8931F5505B26), UINT64_C(0x54C6687B643A36ED), + UINT64_C(0xE9F5CE8E922D379C), UINT64_C(0xD6FE2FC403475A57), + UINT64_C(0x97E20C1BB0F9EC0A), UINT64_C(0xA8E9ED51219381C1) + }, { + UINT64_C(0x0000000000000000), UINT64_C(0x1DEE8A5E222CA1DC), + UINT64_C(0x3BDD14BC445943B8), UINT64_C(0x26339EE26675E264), + UINT64_C(0x77BA297888B28770), UINT64_C(0x6A54A326AA9E26AC), + UINT64_C(0x4C673DC4CCEBC4C8), UINT64_C(0x5189B79AEEC76514), + UINT64_C(0xEF7452F111650EE0), UINT64_C(0xF29AD8AF3349AF3C), + UINT64_C(0xD4A9464D553C4D58), UINT64_C(0xC947CC137710EC84), + UINT64_C(0x98CE7B8999D78990), UINT64_C(0x8520F1D7BBFB284C), + UINT64_C(0xA3136F35DD8ECA28), UINT64_C(0xBEFDE56BFFA26BF4), + UINT64_C(0x4C300AC98DC40345), UINT64_C(0x51DE8097AFE8A299), + UINT64_C(0x77ED1E75C99D40FD), UINT64_C(0x6A03942BEBB1E121), + UINT64_C(0x3B8A23B105768435), UINT64_C(0x2664A9EF275A25E9), + UINT64_C(0x0057370D412FC78D), UINT64_C(0x1DB9BD5363036651), + UINT64_C(0xA34458389CA10DA5), UINT64_C(0xBEAAD266BE8DAC79), + UINT64_C(0x98994C84D8F84E1D), UINT64_C(0x8577C6DAFAD4EFC1), + UINT64_C(0xD4FE714014138AD5), UINT64_C(0xC910FB1E363F2B09), + UINT64_C(0xEF2365FC504AC96D), UINT64_C(0xF2CDEFA2726668B1), + UINT64_C(0x986015931B88068A), UINT64_C(0x858E9FCD39A4A756), + UINT64_C(0xA3BD012F5FD14532), UINT64_C(0xBE538B717DFDE4EE), + UINT64_C(0xEFDA3CEB933A81FA), UINT64_C(0xF234B6B5B1162026), + UINT64_C(0xD4072857D763C242), UINT64_C(0xC9E9A209F54F639E), + UINT64_C(0x771447620AED086A), UINT64_C(0x6AFACD3C28C1A9B6), + UINT64_C(0x4CC953DE4EB44BD2), UINT64_C(0x5127D9806C98EA0E), + UINT64_C(0x00AE6E1A825F8F1A), UINT64_C(0x1D40E444A0732EC6), + UINT64_C(0x3B737AA6C606CCA2), UINT64_C(0x269DF0F8E42A6D7E), + UINT64_C(0xD4501F5A964C05CF), UINT64_C(0xC9BE9504B460A413), + UINT64_C(0xEF8D0BE6D2154677), UINT64_C(0xF26381B8F039E7AB), + UINT64_C(0xA3EA36221EFE82BF), UINT64_C(0xBE04BC7C3CD22363), + UINT64_C(0x9837229E5AA7C107), UINT64_C(0x85D9A8C0788B60DB), + UINT64_C(0x3B244DAB87290B2F), UINT64_C(0x26CAC7F5A505AAF3), + UINT64_C(0x00F95917C3704897), UINT64_C(0x1D17D349E15CE94B), + UINT64_C(0x4C9E64D30F9B8C5F), UINT64_C(0x5170EE8D2DB72D83), + UINT64_C(0x7743706F4BC2CFE7), UINT64_C(0x6AADFA3169EE6E3B), + UINT64_C(0xA218840D981E1391), UINT64_C(0xBFF60E53BA32B24D), + UINT64_C(0x99C590B1DC475029), UINT64_C(0x842B1AEFFE6BF1F5), + UINT64_C(0xD5A2AD7510AC94E1), UINT64_C(0xC84C272B3280353D), + UINT64_C(0xEE7FB9C954F5D759), UINT64_C(0xF391339776D97685), + UINT64_C(0x4D6CD6FC897B1D71), UINT64_C(0x50825CA2AB57BCAD), + UINT64_C(0x76B1C240CD225EC9), UINT64_C(0x6B5F481EEF0EFF15), + UINT64_C(0x3AD6FF8401C99A01), UINT64_C(0x273875DA23E53BDD), + UINT64_C(0x010BEB384590D9B9), UINT64_C(0x1CE5616667BC7865), + UINT64_C(0xEE288EC415DA10D4), UINT64_C(0xF3C6049A37F6B108), + UINT64_C(0xD5F59A785183536C), UINT64_C(0xC81B102673AFF2B0), + UINT64_C(0x9992A7BC9D6897A4), UINT64_C(0x847C2DE2BF443678), + UINT64_C(0xA24FB300D931D41C), UINT64_C(0xBFA1395EFB1D75C0), + UINT64_C(0x015CDC3504BF1E34), UINT64_C(0x1CB2566B2693BFE8), + UINT64_C(0x3A81C88940E65D8C), UINT64_C(0x276F42D762CAFC50), + UINT64_C(0x76E6F54D8C0D9944), UINT64_C(0x6B087F13AE213898), + UINT64_C(0x4D3BE1F1C854DAFC), UINT64_C(0x50D56BAFEA787B20), + UINT64_C(0x3A78919E8396151B), UINT64_C(0x27961BC0A1BAB4C7), + UINT64_C(0x01A58522C7CF56A3), UINT64_C(0x1C4B0F7CE5E3F77F), + UINT64_C(0x4DC2B8E60B24926B), UINT64_C(0x502C32B8290833B7), + UINT64_C(0x761FAC5A4F7DD1D3), UINT64_C(0x6BF126046D51700F), + UINT64_C(0xD50CC36F92F31BFB), UINT64_C(0xC8E24931B0DFBA27), + UINT64_C(0xEED1D7D3D6AA5843), UINT64_C(0xF33F5D8DF486F99F), + UINT64_C(0xA2B6EA171A419C8B), UINT64_C(0xBF586049386D3D57), + UINT64_C(0x996BFEAB5E18DF33), UINT64_C(0x848574F57C347EEF), + UINT64_C(0x76489B570E52165E), UINT64_C(0x6BA611092C7EB782), + UINT64_C(0x4D958FEB4A0B55E6), UINT64_C(0x507B05B56827F43A), + UINT64_C(0x01F2B22F86E0912E), UINT64_C(0x1C1C3871A4CC30F2), + UINT64_C(0x3A2FA693C2B9D296), UINT64_C(0x27C12CCDE095734A), + UINT64_C(0x993CC9A61F3718BE), UINT64_C(0x84D243F83D1BB962), + UINT64_C(0xA2E1DD1A5B6E5B06), UINT64_C(0xBF0F57447942FADA), + UINT64_C(0xEE86E0DE97859FCE), UINT64_C(0xF3686A80B5A93E12), + UINT64_C(0xD55BF462D3DCDC76), UINT64_C(0xC8B57E3CF1F07DAA), + UINT64_C(0xD6E9A7309F3239A7), UINT64_C(0xCB072D6EBD1E987B), + UINT64_C(0xED34B38CDB6B7A1F), UINT64_C(0xF0DA39D2F947DBC3), + UINT64_C(0xA1538E481780BED7), UINT64_C(0xBCBD041635AC1F0B), + UINT64_C(0x9A8E9AF453D9FD6F), UINT64_C(0x876010AA71F55CB3), + UINT64_C(0x399DF5C18E573747), UINT64_C(0x24737F9FAC7B969B), + UINT64_C(0x0240E17DCA0E74FF), UINT64_C(0x1FAE6B23E822D523), + UINT64_C(0x4E27DCB906E5B037), UINT64_C(0x53C956E724C911EB), + UINT64_C(0x75FAC80542BCF38F), UINT64_C(0x6814425B60905253), + UINT64_C(0x9AD9ADF912F63AE2), UINT64_C(0x873727A730DA9B3E), + UINT64_C(0xA104B94556AF795A), UINT64_C(0xBCEA331B7483D886), + UINT64_C(0xED6384819A44BD92), UINT64_C(0xF08D0EDFB8681C4E), + UINT64_C(0xD6BE903DDE1DFE2A), UINT64_C(0xCB501A63FC315FF6), + UINT64_C(0x75ADFF0803933402), UINT64_C(0x6843755621BF95DE), + UINT64_C(0x4E70EBB447CA77BA), UINT64_C(0x539E61EA65E6D666), + UINT64_C(0x0217D6708B21B372), UINT64_C(0x1FF95C2EA90D12AE), + UINT64_C(0x39CAC2CCCF78F0CA), UINT64_C(0x24244892ED545116), + UINT64_C(0x4E89B2A384BA3F2D), UINT64_C(0x536738FDA6969EF1), + UINT64_C(0x7554A61FC0E37C95), UINT64_C(0x68BA2C41E2CFDD49), + UINT64_C(0x39339BDB0C08B85D), UINT64_C(0x24DD11852E241981), + UINT64_C(0x02EE8F674851FBE5), UINT64_C(0x1F0005396A7D5A39), + UINT64_C(0xA1FDE05295DF31CD), UINT64_C(0xBC136A0CB7F39011), + UINT64_C(0x9A20F4EED1867275), UINT64_C(0x87CE7EB0F3AAD3A9), + UINT64_C(0xD647C92A1D6DB6BD), UINT64_C(0xCBA943743F411761), + UINT64_C(0xED9ADD965934F505), UINT64_C(0xF07457C87B1854D9), + UINT64_C(0x02B9B86A097E3C68), UINT64_C(0x1F5732342B529DB4), + UINT64_C(0x3964ACD64D277FD0), UINT64_C(0x248A26886F0BDE0C), + UINT64_C(0x7503911281CCBB18), UINT64_C(0x68ED1B4CA3E01AC4), + UINT64_C(0x4EDE85AEC595F8A0), UINT64_C(0x53300FF0E7B9597C), + UINT64_C(0xEDCDEA9B181B3288), UINT64_C(0xF02360C53A379354), + UINT64_C(0xD610FE275C427130), UINT64_C(0xCBFE74797E6ED0EC), + UINT64_C(0x9A77C3E390A9B5F8), UINT64_C(0x879949BDB2851424), + UINT64_C(0xA1AAD75FD4F0F640), UINT64_C(0xBC445D01F6DC579C), + UINT64_C(0x74F1233D072C2A36), UINT64_C(0x691FA96325008BEA), + UINT64_C(0x4F2C37814375698E), UINT64_C(0x52C2BDDF6159C852), + UINT64_C(0x034B0A458F9EAD46), UINT64_C(0x1EA5801BADB20C9A), + UINT64_C(0x38961EF9CBC7EEFE), UINT64_C(0x257894A7E9EB4F22), + UINT64_C(0x9B8571CC164924D6), UINT64_C(0x866BFB923465850A), + UINT64_C(0xA05865705210676E), UINT64_C(0xBDB6EF2E703CC6B2), + UINT64_C(0xEC3F58B49EFBA3A6), UINT64_C(0xF1D1D2EABCD7027A), + UINT64_C(0xD7E24C08DAA2E01E), UINT64_C(0xCA0CC656F88E41C2), + UINT64_C(0x38C129F48AE82973), UINT64_C(0x252FA3AAA8C488AF), + UINT64_C(0x031C3D48CEB16ACB), UINT64_C(0x1EF2B716EC9DCB17), + UINT64_C(0x4F7B008C025AAE03), UINT64_C(0x52958AD220760FDF), + UINT64_C(0x74A614304603EDBB), UINT64_C(0x69489E6E642F4C67), + UINT64_C(0xD7B57B059B8D2793), UINT64_C(0xCA5BF15BB9A1864F), + UINT64_C(0xEC686FB9DFD4642B), UINT64_C(0xF186E5E7FDF8C5F7), + UINT64_C(0xA00F527D133FA0E3), UINT64_C(0xBDE1D8233113013F), + UINT64_C(0x9BD246C15766E35B), UINT64_C(0x863CCC9F754A4287), + UINT64_C(0xEC9136AE1CA42CBC), UINT64_C(0xF17FBCF03E888D60), + UINT64_C(0xD74C221258FD6F04), UINT64_C(0xCAA2A84C7AD1CED8), + UINT64_C(0x9B2B1FD69416ABCC), UINT64_C(0x86C59588B63A0A10), + UINT64_C(0xA0F60B6AD04FE874), UINT64_C(0xBD188134F26349A8), + UINT64_C(0x03E5645F0DC1225C), UINT64_C(0x1E0BEE012FED8380), + UINT64_C(0x383870E3499861E4), UINT64_C(0x25D6FABD6BB4C038), + UINT64_C(0x745F4D278573A52C), UINT64_C(0x69B1C779A75F04F0), + UINT64_C(0x4F82599BC12AE694), UINT64_C(0x526CD3C5E3064748), + UINT64_C(0xA0A13C6791602FF9), UINT64_C(0xBD4FB639B34C8E25), + UINT64_C(0x9B7C28DBD5396C41), UINT64_C(0x8692A285F715CD9D), + UINT64_C(0xD71B151F19D2A889), UINT64_C(0xCAF59F413BFE0955), + UINT64_C(0xECC601A35D8BEB31), UINT64_C(0xF1288BFD7FA74AED), + UINT64_C(0x4FD56E9680052119), UINT64_C(0x523BE4C8A22980C5), + UINT64_C(0x74087A2AC45C62A1), UINT64_C(0x69E6F074E670C37D), + UINT64_C(0x386F47EE08B7A669), UINT64_C(0x2581CDB02A9B07B5), + UINT64_C(0x03B253524CEEE5D1), UINT64_C(0x1E5CD90C6EC2440D) + } +}; diff --git a/src/liblzma/check/crc64_tablegen.c b/src/liblzma/check/crc64_tablegen.c new file mode 100644 index 0000000..fddaa7e --- /dev/null +++ b/src/liblzma/check/crc64_tablegen.c @@ -0,0 +1,88 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc64_tablegen.c +/// \brief Generate crc64_table_le.h and crc64_table_be.h +/// +/// Compiling: gcc -std=c99 -o crc64_tablegen crc64_tablegen.c +/// Add -DWORDS_BIGENDIAN to generate big endian table. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include +#include "../../common/tuklib_integer.h" + + +static uint64_t crc64_table[4][256]; + + +extern void +init_crc64_table(void) +{ + static const uint64_t poly64 = UINT64_C(0xC96C5795D7870F42); + + for (size_t s = 0; s < 4; ++s) { + for (size_t b = 0; b < 256; ++b) { + uint64_t r = s == 0 ? b : crc64_table[s - 1][b]; + + for (size_t i = 0; i < 8; ++i) { + if (r & 1) + r = (r >> 1) ^ poly64; + else + r >>= 1; + } + + crc64_table[s][b] = r; + } + } + +#ifdef WORDS_BIGENDIAN + for (size_t s = 0; s < 4; ++s) + for (size_t b = 0; b < 256; ++b) + crc64_table[s][b] = bswap64(crc64_table[s][b]); +#endif + + return; +} + + +static void +print_crc64_table(void) +{ + printf("/* This file has been automatically generated by " + "crc64_tablegen.c. */\n\n" + "const uint64_t lzma_crc64_table[4][256] = {\n\t{"); + + for (size_t s = 0; s < 4; ++s) { + for (size_t b = 0; b < 256; ++b) { + if ((b % 2) == 0) + printf("\n\t\t"); + + printf("UINT64_C(0x%016" PRIX64 ")", + crc64_table[s][b]); + + if (b != 255) + printf(",%s", (b+1) % 2 == 0 ? "" : " "); + } + + if (s == 3) + printf("\n\t}\n};\n"); + else + printf("\n\t}, {"); + } + + return; +} + + +int +main(void) +{ + init_crc64_table(); + print_crc64_table(); + return 0; +} diff --git a/src/liblzma/check/crc64_x86.S b/src/liblzma/check/crc64_x86.S new file mode 100644 index 0000000..9aecf58 --- /dev/null +++ b/src/liblzma/check/crc64_x86.S @@ -0,0 +1,296 @@ +/* + * Speed-optimized CRC64 using slicing-by-four algorithm + * + * This uses only i386 instructions, but it is optimized for i686 and later + * (including e.g. Pentium II/III/IV, Athlon XP, and Core 2). + * + * Authors: Igor Pavlov (original CRC32 assembly code) + * Lasse Collin (CRC64 adaptation of the modified CRC32 code) + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + * + * This code needs lzma_crc64_table, which can be created using the + * following C code: + +uint64_t lzma_crc64_table[4][256]; + +void +init_table(void) +{ + // ECMA-182 + static const uint64_t poly64 = UINT64_C(0xC96C5795D7870F42); + + for (size_t s = 0; s < 4; ++s) { + for (size_t b = 0; b < 256; ++b) { + uint64_t r = s == 0 ? b : lzma_crc64_table[s - 1][b]; + + for (size_t i = 0; i < 8; ++i) { + if (r & 1) + r = (r >> 1) ^ poly64; + else + r >>= 1; + } + + lzma_crc64_table[s][b] = r; + } + } +} + + * The prototype of the CRC64 function: + * extern uint64_t lzma_crc64(const uint8_t *buf, size_t size, uint64_t crc); + */ + +/* When Intel CET is enabled, include in assembly code to mark + Intel CET support. */ +#ifdef __CET__ +# include +#else +# define _CET_ENDBR +#endif + +/* + * On some systems, the functions need to be prefixed. The prefix is + * usually an underscore. + */ +#ifndef __USER_LABEL_PREFIX__ +# define __USER_LABEL_PREFIX__ +#endif +#define MAKE_SYM_CAT(prefix, sym) prefix ## sym +#define MAKE_SYM(prefix, sym) MAKE_SYM_CAT(prefix, sym) +#define LZMA_CRC64 MAKE_SYM(__USER_LABEL_PREFIX__, lzma_crc64) +#define LZMA_CRC64_TABLE MAKE_SYM(__USER_LABEL_PREFIX__, lzma_crc64_table) + +/* + * Solaris assembler doesn't have .p2align, and Darwin uses .align + * differently than GNU/Linux and Solaris. + */ +#if defined(__APPLE__) || defined(__MSDOS__) +# define ALIGN(pow2, abs) .align pow2 +#else +# define ALIGN(pow2, abs) .align abs +#endif + + .text + .globl LZMA_CRC64 + +#if !defined(__APPLE__) && !defined(_WIN32) && !defined(__CYGWIN__) \ + && !defined(__MSDOS__) + .type LZMA_CRC64, @function +#endif + + ALIGN(4, 16) +LZMA_CRC64: + _CET_ENDBR + /* + * Register usage: + * %eax crc LSB + * %edx crc MSB + * %esi buf + * %edi size or buf + size + * %ebx lzma_crc64_table + * %ebp Table index + * %ecx Temporary + */ + pushl %ebx + pushl %esi + pushl %edi + pushl %ebp + movl 0x14(%esp), %esi /* buf */ + movl 0x18(%esp), %edi /* size */ + movl 0x1C(%esp), %eax /* crc LSB */ + movl 0x20(%esp), %edx /* crc MSB */ + + /* + * Store the address of lzma_crc64_table to %ebx. This is needed to + * get position-independent code (PIC). + * + * The PIC macro is defined by libtool, while __PIC__ is defined + * by GCC but only on some systems. Testing for both makes it simpler + * to test this code without libtool, and keeps the code working also + * when built with libtool but using something else than GCC. + * + * I understood that libtool may define PIC on Windows even though + * the code in Windows DLLs is not PIC in sense that it is in ELF + * binaries, so we need a separate check to always use the non-PIC + * code on Windows. + */ +#if (!defined(PIC) && !defined(__PIC__)) \ + || (defined(_WIN32) || defined(__CYGWIN__)) + /* Not PIC */ + movl $ LZMA_CRC64_TABLE, %ebx +#elif defined(__APPLE__) + /* Mach-O */ + call .L_get_pc +.L_pic: + leal .L_lzma_crc64_table$non_lazy_ptr-.L_pic(%ebx), %ebx + movl (%ebx), %ebx +#else + /* ELF */ + call .L_get_pc + addl $_GLOBAL_OFFSET_TABLE_, %ebx + movl LZMA_CRC64_TABLE@GOT(%ebx), %ebx +#endif + + /* Complement the initial value. */ + notl %eax + notl %edx + +.L_align: + /* + * Check if there is enough input to use slicing-by-four. + * We need eight bytes, because the loop pre-reads four bytes. + */ + cmpl $8, %edi + jb .L_rest + + /* Check if we have reached alignment of four bytes. */ + testl $3, %esi + jz .L_slice + + /* Calculate CRC of the next input byte. */ + movzbl (%esi), %ebp + incl %esi + movzbl %al, %ecx + xorl %ecx, %ebp + shrdl $8, %edx, %eax + xorl (%ebx, %ebp, 8), %eax + shrl $8, %edx + xorl 4(%ebx, %ebp, 8), %edx + decl %edi + jmp .L_align + +.L_slice: + /* + * If we get here, there's at least eight bytes of aligned input + * available. Make %edi multiple of four bytes. Store the possible + * remainder over the "size" variable in the argument stack. + */ + movl %edi, 0x18(%esp) + andl $-4, %edi + subl %edi, 0x18(%esp) + + /* + * Let %edi be buf + size - 4 while running the main loop. This way + * we can compare for equality to determine when exit the loop. + */ + addl %esi, %edi + subl $4, %edi + + /* Read in the first four aligned bytes. */ + movl (%esi), %ecx + +.L_loop: + xorl %eax, %ecx + movzbl %cl, %ebp + movl 0x1800(%ebx, %ebp, 8), %eax + xorl %edx, %eax + movl 0x1804(%ebx, %ebp, 8), %edx + movzbl %ch, %ebp + xorl 0x1000(%ebx, %ebp, 8), %eax + xorl 0x1004(%ebx, %ebp, 8), %edx + shrl $16, %ecx + movzbl %cl, %ebp + xorl 0x0800(%ebx, %ebp, 8), %eax + xorl 0x0804(%ebx, %ebp, 8), %edx + movzbl %ch, %ebp + addl $4, %esi + xorl (%ebx, %ebp, 8), %eax + xorl 4(%ebx, %ebp, 8), %edx + + /* Check for end of aligned input. */ + cmpl %edi, %esi + + /* + * Copy the next input byte to %ecx. It is slightly faster to + * read it here than at the top of the loop. + */ + movl (%esi), %ecx + jb .L_loop + + /* + * Process the remaining four bytes, which we have already + * copied to %ecx. + */ + xorl %eax, %ecx + movzbl %cl, %ebp + movl 0x1800(%ebx, %ebp, 8), %eax + xorl %edx, %eax + movl 0x1804(%ebx, %ebp, 8), %edx + movzbl %ch, %ebp + xorl 0x1000(%ebx, %ebp, 8), %eax + xorl 0x1004(%ebx, %ebp, 8), %edx + shrl $16, %ecx + movzbl %cl, %ebp + xorl 0x0800(%ebx, %ebp, 8), %eax + xorl 0x0804(%ebx, %ebp, 8), %edx + movzbl %ch, %ebp + addl $4, %esi + xorl (%ebx, %ebp, 8), %eax + xorl 4(%ebx, %ebp, 8), %edx + + /* Copy the number of remaining bytes to %edi. */ + movl 0x18(%esp), %edi + +.L_rest: + /* Check for end of input. */ + testl %edi, %edi + jz .L_return + + /* Calculate CRC of the next input byte. */ + movzbl (%esi), %ebp + incl %esi + movzbl %al, %ecx + xorl %ecx, %ebp + shrdl $8, %edx, %eax + xorl (%ebx, %ebp, 8), %eax + shrl $8, %edx + xorl 4(%ebx, %ebp, 8), %edx + decl %edi + jmp .L_rest + +.L_return: + /* Complement the final value. */ + notl %eax + notl %edx + + popl %ebp + popl %edi + popl %esi + popl %ebx + ret + +#if defined(PIC) || defined(__PIC__) + ALIGN(4, 16) +.L_get_pc: + movl (%esp), %ebx + ret +#endif + +#if defined(__APPLE__) && (defined(PIC) || defined(__PIC__)) + /* Mach-O PIC */ + .section __IMPORT,__pointers,non_lazy_symbol_pointers +.L_lzma_crc64_table$non_lazy_ptr: + .indirect_symbol LZMA_CRC64_TABLE + .long 0 + +#elif defined(_WIN32) || defined(__CYGWIN__) +# ifdef DLL_EXPORT + /* This is equivalent of __declspec(dllexport). */ + .section .drectve + .ascii " -export:lzma_crc64" +# endif + +#elif !defined(__MSDOS__) + /* ELF */ + .size LZMA_CRC64, .-LZMA_CRC64 +#endif + +/* + * This is needed to support non-executable stack. It's ugly to + * use __FreeBSD__ and __linux__ here, but I don't know a way to detect when + * we are using GNU assembler. + */ +#if defined(__ELF__) && (defined(__FreeBSD__) || defined(__linux__)) + .section .note.GNU-stack,"",@progbits +#endif diff --git a/src/liblzma/check/crc_macros.h b/src/liblzma/check/crc_macros.h new file mode 100644 index 0000000..a7c21b7 --- /dev/null +++ b/src/liblzma/check/crc_macros.h @@ -0,0 +1,30 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file crc_macros.h +/// \brief Some endian-dependent macros for CRC32 and CRC64 +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifdef WORDS_BIGENDIAN +# define A(x) ((x) >> 24) +# define B(x) (((x) >> 16) & 0xFF) +# define C(x) (((x) >> 8) & 0xFF) +# define D(x) ((x) & 0xFF) + +# define S8(x) ((x) << 8) +# define S32(x) ((x) << 32) + +#else +# define A(x) ((x) & 0xFF) +# define B(x) (((x) >> 8) & 0xFF) +# define C(x) (((x) >> 16) & 0xFF) +# define D(x) ((x) >> 24) + +# define S8(x) ((x) >> 8) +# define S32(x) ((x) >> 32) +#endif diff --git a/src/liblzma/check/sha256.c b/src/liblzma/check/sha256.c new file mode 100644 index 0000000..5eede5c --- /dev/null +++ b/src/liblzma/check/sha256.c @@ -0,0 +1,196 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file sha256.c +/// \brief SHA-256 +/// +/// \todo Crypto++ has x86 ASM optimizations. They use SSE so if they +/// are imported to liblzma, SSE instructions need to be used +/// conditionally to keep the code working on older boxes. +// +// This code is based on the code found from 7-Zip, which has a modified +// version of the SHA-256 found from Crypto++ . +// The code was modified a little to fit into liblzma. +// +// Authors: Kevin Springle +// Wei Dai +// Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "check.h" + +// Rotate a uint32_t. GCC can optimize this to a rotate instruction +// at least on x86. +static inline uint32_t +rotr_32(uint32_t num, unsigned amount) +{ + return (num >> amount) | (num << (32 - amount)); +} + +#define blk0(i) (W[i] = conv32be(data[i])) +#define blk2(i) (W[i & 15] += s1(W[(i - 2) & 15]) + W[(i - 7) & 15] \ + + s0(W[(i - 15) & 15])) + +#define Ch(x, y, z) (z ^ (x & (y ^ z))) +#define Maj(x, y, z) ((x & (y ^ z)) + (y & z)) + +#define a(i) T[(0 - i) & 7] +#define b(i) T[(1 - i) & 7] +#define c(i) T[(2 - i) & 7] +#define d(i) T[(3 - i) & 7] +#define e(i) T[(4 - i) & 7] +#define f(i) T[(5 - i) & 7] +#define g(i) T[(6 - i) & 7] +#define h(i) T[(7 - i) & 7] + +#define R(i, j, blk) \ + h(i) += S1(e(i)) + Ch(e(i), f(i), g(i)) + SHA256_K[i + j] + blk; \ + d(i) += h(i); \ + h(i) += S0(a(i)) + Maj(a(i), b(i), c(i)) +#define R0(i) R(i, 0, blk0(i)) +#define R2(i) R(i, j, blk2(i)) + +#define S0(x) rotr_32(x ^ rotr_32(x ^ rotr_32(x, 9), 11), 2) +#define S1(x) rotr_32(x ^ rotr_32(x ^ rotr_32(x, 14), 5), 6) +#define s0(x) (rotr_32(x ^ rotr_32(x, 11), 7) ^ (x >> 3)) +#define s1(x) (rotr_32(x ^ rotr_32(x, 2), 17) ^ (x >> 10)) + + +static const uint32_t SHA256_K[64] = { + 0x428A2F98, 0x71374491, 0xB5C0FBCF, 0xE9B5DBA5, + 0x3956C25B, 0x59F111F1, 0x923F82A4, 0xAB1C5ED5, + 0xD807AA98, 0x12835B01, 0x243185BE, 0x550C7DC3, + 0x72BE5D74, 0x80DEB1FE, 0x9BDC06A7, 0xC19BF174, + 0xE49B69C1, 0xEFBE4786, 0x0FC19DC6, 0x240CA1CC, + 0x2DE92C6F, 0x4A7484AA, 0x5CB0A9DC, 0x76F988DA, + 0x983E5152, 0xA831C66D, 0xB00327C8, 0xBF597FC7, + 0xC6E00BF3, 0xD5A79147, 0x06CA6351, 0x14292967, + 0x27B70A85, 0x2E1B2138, 0x4D2C6DFC, 0x53380D13, + 0x650A7354, 0x766A0ABB, 0x81C2C92E, 0x92722C85, + 0xA2BFE8A1, 0xA81A664B, 0xC24B8B70, 0xC76C51A3, + 0xD192E819, 0xD6990624, 0xF40E3585, 0x106AA070, + 0x19A4C116, 0x1E376C08, 0x2748774C, 0x34B0BCB5, + 0x391C0CB3, 0x4ED8AA4A, 0x5B9CCA4F, 0x682E6FF3, + 0x748F82EE, 0x78A5636F, 0x84C87814, 0x8CC70208, + 0x90BEFFFA, 0xA4506CEB, 0xBEF9A3F7, 0xC67178F2, +}; + + +static void +transform(uint32_t state[8], const uint32_t data[16]) +{ + uint32_t W[16]; + uint32_t T[8]; + + // Copy state[] to working vars. + memcpy(T, state, sizeof(T)); + + // The first 16 operations unrolled + R0( 0); R0( 1); R0( 2); R0( 3); + R0( 4); R0( 5); R0( 6); R0( 7); + R0( 8); R0( 9); R0(10); R0(11); + R0(12); R0(13); R0(14); R0(15); + + // The remaining 48 operations partially unrolled + for (unsigned int j = 16; j < 64; j += 16) { + R2( 0); R2( 1); R2( 2); R2( 3); + R2( 4); R2( 5); R2( 6); R2( 7); + R2( 8); R2( 9); R2(10); R2(11); + R2(12); R2(13); R2(14); R2(15); + } + + // Add the working vars back into state[]. + state[0] += a(0); + state[1] += b(0); + state[2] += c(0); + state[3] += d(0); + state[4] += e(0); + state[5] += f(0); + state[6] += g(0); + state[7] += h(0); +} + + +static void +process(lzma_check_state *check) +{ + transform(check->state.sha256.state, check->buffer.u32); + return; +} + + +extern void +lzma_sha256_init(lzma_check_state *check) +{ + static const uint32_t s[8] = { + 0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A, + 0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19, + }; + + memcpy(check->state.sha256.state, s, sizeof(s)); + check->state.sha256.size = 0; + + return; +} + + +extern void +lzma_sha256_update(const uint8_t *buf, size_t size, lzma_check_state *check) +{ + // Copy the input data into a properly aligned temporary buffer. + // This way we can be called with arbitrarily sized buffers + // (no need to be multiple of 64 bytes), and the code works also + // on architectures that don't allow unaligned memory access. + while (size > 0) { + const size_t copy_start = check->state.sha256.size & 0x3F; + size_t copy_size = 64 - copy_start; + if (copy_size > size) + copy_size = size; + + memcpy(check->buffer.u8 + copy_start, buf, copy_size); + + buf += copy_size; + size -= copy_size; + check->state.sha256.size += copy_size; + + if ((check->state.sha256.size & 0x3F) == 0) + process(check); + } + + return; +} + + +extern void +lzma_sha256_finish(lzma_check_state *check) +{ + // Add padding as described in RFC 3174 (it describes SHA-1 but + // the same padding style is used for SHA-256 too). + size_t pos = check->state.sha256.size & 0x3F; + check->buffer.u8[pos++] = 0x80; + + while (pos != 64 - 8) { + if (pos == 64) { + process(check); + pos = 0; + } + + check->buffer.u8[pos++] = 0x00; + } + + // Convert the message size from bytes to bits. + check->state.sha256.size *= 8; + + check->buffer.u64[(64 - 8) / 8] = conv64be(check->state.sha256.size); + + process(check); + + for (size_t i = 0; i < 8; ++i) + check->buffer.u32[i] = conv32be(check->state.sha256.state[i]); + + return; +} diff --git a/src/liblzma/common/Makefile.inc b/src/liblzma/common/Makefile.inc new file mode 100644 index 0000000..f0276a2 --- /dev/null +++ b/src/liblzma/common/Makefile.inc @@ -0,0 +1,104 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +liblzma_la_SOURCES += \ + common/common.c \ + common/common.h \ + common/memcmplen.h \ + common/block_util.c \ + common/easy_preset.c \ + common/easy_preset.h \ + common/filter_common.c \ + common/filter_common.h \ + common/hardware_physmem.c \ + common/index.c \ + common/index.h \ + common/stream_flags_common.c \ + common/stream_flags_common.h \ + common/string_conversion.c \ + common/vli_size.c + +if COND_THREADS +liblzma_la_SOURCES += \ + common/hardware_cputhreads.c \ + common/outqueue.c \ + common/outqueue.h +endif + +if COND_MAIN_ENCODER +liblzma_la_SOURCES += \ + common/alone_encoder.c \ + common/block_buffer_encoder.c \ + common/block_buffer_encoder.h \ + common/block_encoder.c \ + common/block_encoder.h \ + common/block_header_encoder.c \ + common/easy_buffer_encoder.c \ + common/easy_encoder.c \ + common/easy_encoder_memusage.c \ + common/filter_buffer_encoder.c \ + common/filter_encoder.c \ + common/filter_encoder.h \ + common/filter_flags_encoder.c \ + common/index_encoder.c \ + common/index_encoder.h \ + common/stream_buffer_encoder.c \ + common/stream_encoder.c \ + common/stream_flags_encoder.c \ + common/vli_encoder.c + +if COND_THREADS +liblzma_la_SOURCES += \ + common/stream_encoder_mt.c +endif + +if COND_MICROLZMA +liblzma_la_SOURCES += \ + common/microlzma_encoder.c +endif +endif + +if COND_MAIN_DECODER +liblzma_la_SOURCES += \ + common/alone_decoder.c \ + common/alone_decoder.h \ + common/auto_decoder.c \ + common/block_buffer_decoder.c \ + common/block_decoder.c \ + common/block_decoder.h \ + common/block_header_decoder.c \ + common/easy_decoder_memusage.c \ + common/file_info.c \ + common/filter_buffer_decoder.c \ + common/filter_decoder.c \ + common/filter_decoder.h \ + common/filter_flags_decoder.c \ + common/index_decoder.c \ + common/index_decoder.h \ + common/index_hash.c \ + common/stream_buffer_decoder.c \ + common/stream_decoder.c \ + common/stream_decoder.h \ + common/stream_flags_decoder.c \ + common/vli_decoder.c + +if COND_THREADS +liblzma_la_SOURCES += \ + common/stream_decoder_mt.c +endif + +if COND_MICROLZMA +liblzma_la_SOURCES += \ + common/microlzma_decoder.c +endif + +if COND_LZIP_DECODER +liblzma_la_SOURCES += \ + common/lzip_decoder.c \ + common/lzip_decoder.h +endif +endif diff --git a/src/liblzma/common/alone_decoder.c b/src/liblzma/common/alone_decoder.c new file mode 100644 index 0000000..1dc85ba --- /dev/null +++ b/src/liblzma/common/alone_decoder.c @@ -0,0 +1,249 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file alone_decoder.c +/// \brief Decoder for LZMA_Alone files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "alone_decoder.h" +#include "lzma_decoder.h" +#include "lz_decoder.h" + + +typedef struct { + lzma_next_coder next; + + enum { + SEQ_PROPERTIES, + SEQ_DICTIONARY_SIZE, + SEQ_UNCOMPRESSED_SIZE, + SEQ_CODER_INIT, + SEQ_CODE, + } sequence; + + /// If true, reject files that are unlikely to be .lzma files. + /// If false, more non-.lzma files get accepted and will give + /// LZMA_DATA_ERROR either immediately or after a few output bytes. + bool picky; + + /// Position in the header fields + size_t pos; + + /// Uncompressed size decoded from the header + lzma_vli uncompressed_size; + + /// Memory usage limit + uint64_t memlimit; + + /// Amount of memory actually needed (only an estimate) + uint64_t memusage; + + /// Options decoded from the header needed to initialize + /// the LZMA decoder + lzma_options_lzma options; +} lzma_alone_coder; + + +static lzma_ret +alone_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, + lzma_action action) +{ + lzma_alone_coder *coder = coder_ptr; + + while (*out_pos < out_size + && (coder->sequence == SEQ_CODE || *in_pos < in_size)) + switch (coder->sequence) { + case SEQ_PROPERTIES: + if (lzma_lzma_lclppb_decode(&coder->options, in[*in_pos])) + return LZMA_FORMAT_ERROR; + + coder->sequence = SEQ_DICTIONARY_SIZE; + ++*in_pos; + break; + + case SEQ_DICTIONARY_SIZE: + coder->options.dict_size + |= (size_t)(in[*in_pos]) << (coder->pos * 8); + + if (++coder->pos == 4) { + if (coder->picky && coder->options.dict_size + != UINT32_MAX) { + // A hack to ditch tons of false positives: + // We allow only dictionary sizes that are + // 2^n or 2^n + 2^(n-1). LZMA_Alone created + // only files with 2^n, but accepts any + // dictionary size. + uint32_t d = coder->options.dict_size - 1; + d |= d >> 2; + d |= d >> 3; + d |= d >> 4; + d |= d >> 8; + d |= d >> 16; + ++d; + + if (d != coder->options.dict_size) + return LZMA_FORMAT_ERROR; + } + + coder->pos = 0; + coder->sequence = SEQ_UNCOMPRESSED_SIZE; + } + + ++*in_pos; + break; + + case SEQ_UNCOMPRESSED_SIZE: + coder->uncompressed_size + |= (lzma_vli)(in[*in_pos]) << (coder->pos * 8); + ++*in_pos; + if (++coder->pos < 8) + break; + + // Another hack to ditch false positives: Assume that + // if the uncompressed size is known, it must be less + // than 256 GiB. + // + // FIXME? Without picky we allow > LZMA_VLI_MAX which doesn't + // really matter in this specific situation (> LZMA_VLI_MAX is + // safe in the LZMA decoder) but it's somewhat weird still. + if (coder->picky + && coder->uncompressed_size != LZMA_VLI_UNKNOWN + && coder->uncompressed_size + >= (LZMA_VLI_C(1) << 38)) + return LZMA_FORMAT_ERROR; + + // Use LZMA_FILTER_LZMA1EXT features to specify the + // uncompressed size and that the end marker is allowed + // even when the uncompressed size is known. Both .lzma + // header and LZMA1EXT use UINT64_MAX indicate that size + // is unknown. + coder->options.ext_flags = LZMA_LZMA1EXT_ALLOW_EOPM; + lzma_set_ext_size(coder->options, coder->uncompressed_size); + + // Calculate the memory usage so that it is ready + // for SEQ_CODER_INIT. + coder->memusage = lzma_lzma_decoder_memusage(&coder->options) + + LZMA_MEMUSAGE_BASE; + + coder->pos = 0; + coder->sequence = SEQ_CODER_INIT; + + // Fall through + + case SEQ_CODER_INIT: { + if (coder->memusage > coder->memlimit) + return LZMA_MEMLIMIT_ERROR; + + lzma_filter_info filters[2] = { + { + .id = LZMA_FILTER_LZMA1EXT, + .init = &lzma_lzma_decoder_init, + .options = &coder->options, + }, { + .init = NULL, + } + }; + + return_if_error(lzma_next_filter_init(&coder->next, + allocator, filters)); + + coder->sequence = SEQ_CODE; + break; + } + + case SEQ_CODE: { + return coder->next.code(coder->next.coder, + allocator, in, in_pos, in_size, + out, out_pos, out_size, action); + } + + default: + return LZMA_PROG_ERROR; + } + + return LZMA_OK; +} + + +static void +alone_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_alone_coder *coder = coder_ptr; + lzma_next_end(&coder->next, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +alone_decoder_memconfig(void *coder_ptr, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit) +{ + lzma_alone_coder *coder = coder_ptr; + + *memusage = coder->memusage; + *old_memlimit = coder->memlimit; + + if (new_memlimit != 0) { + if (new_memlimit < coder->memusage) + return LZMA_MEMLIMIT_ERROR; + + coder->memlimit = new_memlimit; + } + + return LZMA_OK; +} + + +extern lzma_ret +lzma_alone_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t memlimit, bool picky) +{ + lzma_next_coder_init(&lzma_alone_decoder_init, next, allocator); + + lzma_alone_coder *coder = next->coder; + + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_alone_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &alone_decode; + next->end = &alone_decoder_end; + next->memconfig = &alone_decoder_memconfig; + coder->next = LZMA_NEXT_CODER_INIT; + } + + coder->sequence = SEQ_PROPERTIES; + coder->picky = picky; + coder->pos = 0; + coder->options.dict_size = 0; + coder->options.preset_dict = NULL; + coder->options.preset_dict_size = 0; + coder->uncompressed_size = 0; + coder->memlimit = my_max(1, memlimit); + coder->memusage = LZMA_MEMUSAGE_BASE; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_alone_decoder(lzma_stream *strm, uint64_t memlimit) +{ + lzma_next_strm_init(lzma_alone_decoder_init, strm, memlimit, false); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/alone_decoder.h b/src/liblzma/common/alone_decoder.h new file mode 100644 index 0000000..dfa031a --- /dev/null +++ b/src/liblzma/common/alone_decoder.h @@ -0,0 +1,23 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file alone_decoder.h +/// \brief Decoder for LZMA_Alone files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_ALONE_DECODER_H +#define LZMA_ALONE_DECODER_H + +#include "common.h" + + +extern lzma_ret lzma_alone_decoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t memlimit, bool picky); + +#endif diff --git a/src/liblzma/common/alone_encoder.c b/src/liblzma/common/alone_encoder.c new file mode 100644 index 0000000..c9392f3 --- /dev/null +++ b/src/liblzma/common/alone_encoder.c @@ -0,0 +1,163 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file alone_encoder.c +/// \brief Encoder for LZMA_Alone files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "lzma_encoder.h" + + +#define ALONE_HEADER_SIZE (1 + 4 + 8) + + +typedef struct { + lzma_next_coder next; + + enum { + SEQ_HEADER, + SEQ_CODE, + } sequence; + + size_t header_pos; + uint8_t header[ALONE_HEADER_SIZE]; +} lzma_alone_coder; + + +static lzma_ret +alone_encode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, + lzma_action action) +{ + lzma_alone_coder *coder = coder_ptr; + + while (*out_pos < out_size) + switch (coder->sequence) { + case SEQ_HEADER: + lzma_bufcpy(coder->header, &coder->header_pos, + ALONE_HEADER_SIZE, + out, out_pos, out_size); + if (coder->header_pos < ALONE_HEADER_SIZE) + return LZMA_OK; + + coder->sequence = SEQ_CODE; + break; + + case SEQ_CODE: + return coder->next.code(coder->next.coder, + allocator, in, in_pos, in_size, + out, out_pos, out_size, action); + + default: + assert(0); + return LZMA_PROG_ERROR; + } + + return LZMA_OK; +} + + +static void +alone_encoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_alone_coder *coder = coder_ptr; + lzma_next_end(&coder->next, allocator); + lzma_free(coder, allocator); + return; +} + + +// At least for now, this is not used by any internal function. +static lzma_ret +alone_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_options_lzma *options) +{ + lzma_next_coder_init(&alone_encoder_init, next, allocator); + + lzma_alone_coder *coder = next->coder; + + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_alone_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &alone_encode; + next->end = &alone_encoder_end; + coder->next = LZMA_NEXT_CODER_INIT; + } + + // Basic initializations + coder->sequence = SEQ_HEADER; + coder->header_pos = 0; + + // Encode the header: + // - Properties (1 byte) + if (lzma_lzma_lclppb_encode(options, coder->header)) + return LZMA_OPTIONS_ERROR; + + // - Dictionary size (4 bytes) + if (options->dict_size < LZMA_DICT_SIZE_MIN) + return LZMA_OPTIONS_ERROR; + + // Round up to the next 2^n or 2^n + 2^(n - 1) depending on which + // one is the next unless it is UINT32_MAX. While the header would + // allow any 32-bit integer, we do this to keep the decoder of liblzma + // accepting the resulting files. + uint32_t d = options->dict_size - 1; + d |= d >> 2; + d |= d >> 3; + d |= d >> 4; + d |= d >> 8; + d |= d >> 16; + if (d != UINT32_MAX) + ++d; + + write32le(coder->header + 1, d); + + // - Uncompressed size (always unknown and using EOPM) + memset(coder->header + 1 + 4, 0xFF, 8); + + // Initialize the LZMA encoder. + const lzma_filter_info filters[2] = { + { + .id = LZMA_FILTER_LZMA1, + .init = &lzma_lzma_encoder_init, + .options = (void *)(options), + }, { + .init = NULL, + } + }; + + return lzma_next_filter_init(&coder->next, allocator, filters); +} + + +/* +extern lzma_ret +lzma_alone_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_options_alone *options) +{ + lzma_next_coder_init(&alone_encoder_init, next, allocator, options); +} +*/ + + +extern LZMA_API(lzma_ret) +lzma_alone_encoder(lzma_stream *strm, const lzma_options_lzma *options) +{ + lzma_next_strm_init(alone_encoder_init, strm, options); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/auto_decoder.c b/src/liblzma/common/auto_decoder.c new file mode 100644 index 0000000..2a5c089 --- /dev/null +++ b/src/liblzma/common/auto_decoder.c @@ -0,0 +1,206 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file auto_decoder.c +/// \brief Autodetect between .xz, .lzma (LZMA_Alone), and .lz (lzip) +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "stream_decoder.h" +#include "alone_decoder.h" +#ifdef HAVE_LZIP_DECODER +# include "lzip_decoder.h" +#endif + + +typedef struct { + /// .xz Stream decoder, LZMA_Alone decoder, or lzip decoder + lzma_next_coder next; + + uint64_t memlimit; + uint32_t flags; + + enum { + SEQ_INIT, + SEQ_CODE, + SEQ_FINISH, + } sequence; +} lzma_auto_coder; + + +static lzma_ret +auto_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_auto_coder *coder = coder_ptr; + + switch (coder->sequence) { + case SEQ_INIT: + if (*in_pos >= in_size) + return LZMA_OK; + + // Update the sequence now, because we want to continue from + // SEQ_CODE even if we return some LZMA_*_CHECK. + coder->sequence = SEQ_CODE; + + // Detect the file format. .xz files start with 0xFD which + // cannot be the first byte of .lzma (LZMA_Alone) format. + // The .lz format starts with 0x4C which could be the + // first byte of a .lzma file but luckily it would mean + // lc/lp/pb being 4/3/1 which liblzma doesn't support because + // lc + lp > 4. So using just 0x4C to detect .lz is OK here. + if (in[*in_pos] == 0xFD) { + return_if_error(lzma_stream_decoder_init( + &coder->next, allocator, + coder->memlimit, coder->flags)); +#ifdef HAVE_LZIP_DECODER + } else if (in[*in_pos] == 0x4C) { + return_if_error(lzma_lzip_decoder_init( + &coder->next, allocator, + coder->memlimit, coder->flags)); +#endif + } else { + return_if_error(lzma_alone_decoder_init(&coder->next, + allocator, coder->memlimit, true)); + + // If the application wants to know about missing + // integrity check or about the check in general, we + // need to handle it here, because LZMA_Alone decoder + // doesn't accept any flags. + if (coder->flags & LZMA_TELL_NO_CHECK) + return LZMA_NO_CHECK; + + if (coder->flags & LZMA_TELL_ANY_CHECK) + return LZMA_GET_CHECK; + } + + // Fall through + + case SEQ_CODE: { + const lzma_ret ret = coder->next.code( + coder->next.coder, allocator, + in, in_pos, in_size, + out, out_pos, out_size, action); + if (ret != LZMA_STREAM_END + || (coder->flags & LZMA_CONCATENATED) == 0) + return ret; + + coder->sequence = SEQ_FINISH; + } + + // Fall through + + case SEQ_FINISH: + // When LZMA_CONCATENATED was used and we were decoding + // a LZMA_Alone file, we need to check that there is no + // trailing garbage and wait for LZMA_FINISH. + if (*in_pos < in_size) + return LZMA_DATA_ERROR; + + return action == LZMA_FINISH ? LZMA_STREAM_END : LZMA_OK; + + default: + assert(0); + return LZMA_PROG_ERROR; + } +} + + +static void +auto_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_auto_coder *coder = coder_ptr; + lzma_next_end(&coder->next, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_check +auto_decoder_get_check(const void *coder_ptr) +{ + const lzma_auto_coder *coder = coder_ptr; + + // It is LZMA_Alone if get_check is NULL. + return coder->next.get_check == NULL ? LZMA_CHECK_NONE + : coder->next.get_check(coder->next.coder); +} + + +static lzma_ret +auto_decoder_memconfig(void *coder_ptr, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit) +{ + lzma_auto_coder *coder = coder_ptr; + + lzma_ret ret; + + if (coder->next.memconfig != NULL) { + ret = coder->next.memconfig(coder->next.coder, + memusage, old_memlimit, new_memlimit); + assert(*old_memlimit == coder->memlimit); + } else { + // No coder is configured yet. Use the base value as + // the current memory usage. + *memusage = LZMA_MEMUSAGE_BASE; + *old_memlimit = coder->memlimit; + + ret = LZMA_OK; + if (new_memlimit != 0 && new_memlimit < *memusage) + ret = LZMA_MEMLIMIT_ERROR; + } + + if (ret == LZMA_OK && new_memlimit != 0) + coder->memlimit = new_memlimit; + + return ret; +} + + +static lzma_ret +auto_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t memlimit, uint32_t flags) +{ + lzma_next_coder_init(&auto_decoder_init, next, allocator); + + if (flags & ~LZMA_SUPPORTED_FLAGS) + return LZMA_OPTIONS_ERROR; + + lzma_auto_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_auto_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &auto_decode; + next->end = &auto_decoder_end; + next->get_check = &auto_decoder_get_check; + next->memconfig = &auto_decoder_memconfig; + coder->next = LZMA_NEXT_CODER_INIT; + } + + coder->memlimit = my_max(1, memlimit); + coder->flags = flags; + coder->sequence = SEQ_INIT; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_auto_decoder(lzma_stream *strm, uint64_t memlimit, uint32_t flags) +{ + lzma_next_strm_init(auto_decoder_init, strm, memlimit, flags); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/block_buffer_decoder.c b/src/liblzma/common/block_buffer_decoder.c new file mode 100644 index 0000000..b0ded90 --- /dev/null +++ b/src/liblzma/common/block_buffer_decoder.c @@ -0,0 +1,80 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_buffer_decoder.c +/// \brief Single-call .xz Block decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "block_decoder.h" + + +extern LZMA_API(lzma_ret) +lzma_block_buffer_decode(lzma_block *block, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + if (in_pos == NULL || (in == NULL && *in_pos != in_size) + || *in_pos > in_size || out_pos == NULL + || (out == NULL && *out_pos != out_size) + || *out_pos > out_size) + return LZMA_PROG_ERROR; + + // Initialize the Block decoder. + lzma_next_coder block_decoder = LZMA_NEXT_CODER_INIT; + lzma_ret ret = lzma_block_decoder_init( + &block_decoder, allocator, block); + + if (ret == LZMA_OK) { + // Save the positions so that we can restore them in case + // an error occurs. + const size_t in_start = *in_pos; + const size_t out_start = *out_pos; + + // Do the actual decoding. + ret = block_decoder.code(block_decoder.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, + LZMA_FINISH); + + if (ret == LZMA_STREAM_END) { + ret = LZMA_OK; + } else { + if (ret == LZMA_OK) { + // Either the input was truncated or the + // output buffer was too small. + assert(*in_pos == in_size + || *out_pos == out_size); + + // If all the input was consumed, then the + // input is truncated, even if the output + // buffer is also full. This is because + // processing the last byte of the Block + // never produces output. + // + // NOTE: This assumption may break when new + // filters are added, if the end marker of + // the filter doesn't consume at least one + // complete byte. + if (*in_pos == in_size) + ret = LZMA_DATA_ERROR; + else + ret = LZMA_BUF_ERROR; + } + + // Restore the positions. + *in_pos = in_start; + *out_pos = out_start; + } + } + + // Free the decoder memory. This needs to be done even if + // initialization fails, because the internal API doesn't + // require the initialization function to free its memory on error. + lzma_next_end(&block_decoder, allocator); + + return ret; +} diff --git a/src/liblzma/common/block_buffer_encoder.c b/src/liblzma/common/block_buffer_encoder.c new file mode 100644 index 0000000..a47342e --- /dev/null +++ b/src/liblzma/common/block_buffer_encoder.c @@ -0,0 +1,355 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_buffer_encoder.c +/// \brief Single-call .xz Block encoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "block_buffer_encoder.h" +#include "block_encoder.h" +#include "filter_encoder.h" +#include "lzma2_encoder.h" +#include "check.h" + + +/// Estimate the maximum size of the Block Header and Check fields for +/// a Block that uses LZMA2 uncompressed chunks. We could use +/// lzma_block_header_size() but this is simpler. +/// +/// Block Header Size + Block Flags + Compressed Size +/// + Uncompressed Size + Filter Flags for LZMA2 + CRC32 + Check +/// and round up to the next multiple of four to take Header Padding +/// into account. +#define HEADERS_BOUND ((1 + 1 + 2 * LZMA_VLI_BYTES_MAX + 3 + 4 \ + + LZMA_CHECK_SIZE_MAX + 3) & ~3) + + +static uint64_t +lzma2_bound(uint64_t uncompressed_size) +{ + // Prevent integer overflow in overhead calculation. + if (uncompressed_size > COMPRESSED_SIZE_MAX) + return 0; + + // Calculate the exact overhead of the LZMA2 headers: Round + // uncompressed_size up to the next multiple of LZMA2_CHUNK_MAX, + // multiply by the size of per-chunk header, and add one byte for + // the end marker. + const uint64_t overhead = ((uncompressed_size + LZMA2_CHUNK_MAX - 1) + / LZMA2_CHUNK_MAX) + * LZMA2_HEADER_UNCOMPRESSED + 1; + + // Catch the possible integer overflow. + if (COMPRESSED_SIZE_MAX - overhead < uncompressed_size) + return 0; + + return uncompressed_size + overhead; +} + + +extern uint64_t +lzma_block_buffer_bound64(uint64_t uncompressed_size) +{ + // If the data doesn't compress, we always use uncompressed + // LZMA2 chunks. + uint64_t lzma2_size = lzma2_bound(uncompressed_size); + if (lzma2_size == 0) + return 0; + + // Take Block Padding into account. + lzma2_size = (lzma2_size + 3) & ~UINT64_C(3); + + // No risk of integer overflow because lzma2_bound() already takes + // into account the size of the headers in the Block. + return HEADERS_BOUND + lzma2_size; +} + + +extern LZMA_API(size_t) +lzma_block_buffer_bound(size_t uncompressed_size) +{ + uint64_t ret = lzma_block_buffer_bound64(uncompressed_size); + +#if SIZE_MAX < UINT64_MAX + // Catch the possible integer overflow on 32-bit systems. + if (ret > SIZE_MAX) + return 0; +#endif + + return ret; +} + + +static lzma_ret +block_encode_uncompressed(lzma_block *block, const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // Use LZMA2 uncompressed chunks. We wouldn't need a dictionary at + // all, but LZMA2 always requires a dictionary, so use the minimum + // value to minimize memory usage of the decoder. + lzma_options_lzma lzma2 = { + .dict_size = LZMA_DICT_SIZE_MIN, + }; + + lzma_filter filters[2]; + filters[0].id = LZMA_FILTER_LZMA2; + filters[0].options = &lzma2; + filters[1].id = LZMA_VLI_UNKNOWN; + + // Set the above filter options to *block temporarily so that we can + // encode the Block Header. + lzma_filter *filters_orig = block->filters; + block->filters = filters; + + if (lzma_block_header_size(block) != LZMA_OK) { + block->filters = filters_orig; + return LZMA_PROG_ERROR; + } + + // Check that there's enough output space. The caller has already + // set block->compressed_size to what lzma2_bound() has returned, + // so we can reuse that value. We know that compressed_size is a + // known valid VLI and header_size is a small value so their sum + // will never overflow. + assert(block->compressed_size == lzma2_bound(in_size)); + if (out_size - *out_pos + < block->header_size + block->compressed_size) { + block->filters = filters_orig; + return LZMA_BUF_ERROR; + } + + if (lzma_block_header_encode(block, out + *out_pos) != LZMA_OK) { + block->filters = filters_orig; + return LZMA_PROG_ERROR; + } + + block->filters = filters_orig; + *out_pos += block->header_size; + + // Encode the data using LZMA2 uncompressed chunks. + size_t in_pos = 0; + uint8_t control = 0x01; // Dictionary reset + + while (in_pos < in_size) { + // Control byte: Indicate uncompressed chunk, of which + // the first resets the dictionary. + out[(*out_pos)++] = control; + control = 0x02; // No dictionary reset + + // Size of the uncompressed chunk + const size_t copy_size + = my_min(in_size - in_pos, LZMA2_CHUNK_MAX); + out[(*out_pos)++] = (copy_size - 1) >> 8; + out[(*out_pos)++] = (copy_size - 1) & 0xFF; + + // The actual data + assert(*out_pos + copy_size <= out_size); + memcpy(out + *out_pos, in + in_pos, copy_size); + + in_pos += copy_size; + *out_pos += copy_size; + } + + // End marker + out[(*out_pos)++] = 0x00; + assert(*out_pos <= out_size); + + return LZMA_OK; +} + + +static lzma_ret +block_encode_normal(lzma_block *block, const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // Find out the size of the Block Header. + return_if_error(lzma_block_header_size(block)); + + // Reserve space for the Block Header and skip it for now. + if (out_size - *out_pos <= block->header_size) + return LZMA_BUF_ERROR; + + const size_t out_start = *out_pos; + *out_pos += block->header_size; + + // Limit out_size so that we stop encoding if the output would grow + // bigger than what uncompressed Block would be. + if (out_size - *out_pos > block->compressed_size) + out_size = *out_pos + block->compressed_size; + + // TODO: In many common cases this could be optimized to use + // significantly less memory. + lzma_next_coder raw_encoder = LZMA_NEXT_CODER_INIT; + lzma_ret ret = lzma_raw_encoder_init( + &raw_encoder, allocator, block->filters); + + if (ret == LZMA_OK) { + size_t in_pos = 0; + ret = raw_encoder.code(raw_encoder.coder, allocator, + in, &in_pos, in_size, out, out_pos, out_size, + LZMA_FINISH); + } + + // NOTE: This needs to be run even if lzma_raw_encoder_init() failed. + lzma_next_end(&raw_encoder, allocator); + + if (ret == LZMA_STREAM_END) { + // Compression was successful. Write the Block Header. + block->compressed_size + = *out_pos - (out_start + block->header_size); + ret = lzma_block_header_encode(block, out + out_start); + if (ret != LZMA_OK) + ret = LZMA_PROG_ERROR; + + } else if (ret == LZMA_OK) { + // Output buffer became full. + ret = LZMA_BUF_ERROR; + } + + // Reset *out_pos if something went wrong. + if (ret != LZMA_OK) + *out_pos = out_start; + + return ret; +} + + +static lzma_ret +block_buffer_encode(lzma_block *block, const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size, + bool try_to_compress) +{ + // Validate the arguments. + if (block == NULL || (in == NULL && in_size != 0) || out == NULL + || out_pos == NULL || *out_pos > out_size) + return LZMA_PROG_ERROR; + + // The contents of the structure may depend on the version so + // check the version before validating the contents of *block. + if (block->version > 1) + return LZMA_OPTIONS_ERROR; + + if ((unsigned int)(block->check) > LZMA_CHECK_ID_MAX + || (try_to_compress && block->filters == NULL)) + return LZMA_PROG_ERROR; + + if (!lzma_check_is_supported(block->check)) + return LZMA_UNSUPPORTED_CHECK; + + // Size of a Block has to be a multiple of four, so limit the size + // here already. This way we don't need to check it again when adding + // Block Padding. + out_size -= (out_size - *out_pos) & 3; + + // Get the size of the Check field. + const size_t check_size = lzma_check_size(block->check); + assert(check_size != UINT32_MAX); + + // Reserve space for the Check field. + if (out_size - *out_pos <= check_size) + return LZMA_BUF_ERROR; + + out_size -= check_size; + + // Initialize block->uncompressed_size and calculate the worst-case + // value for block->compressed_size. + block->uncompressed_size = in_size; + block->compressed_size = lzma2_bound(in_size); + if (block->compressed_size == 0) + return LZMA_DATA_ERROR; + + // Do the actual compression. + lzma_ret ret = LZMA_BUF_ERROR; + if (try_to_compress) + ret = block_encode_normal(block, allocator, + in, in_size, out, out_pos, out_size); + + if (ret != LZMA_OK) { + // If the error was something else than output buffer + // becoming full, return the error now. + if (ret != LZMA_BUF_ERROR) + return ret; + + // The data was uncompressible (at least with the options + // given to us) or the output buffer was too small. Use the + // uncompressed chunks of LZMA2 to wrap the data into a valid + // Block. If we haven't been given enough output space, even + // this may fail. + return_if_error(block_encode_uncompressed(block, in, in_size, + out, out_pos, out_size)); + } + + assert(*out_pos <= out_size); + + // Block Padding. No buffer overflow here, because we already adjusted + // out_size so that (out_size - out_start) is a multiple of four. + // Thus, if the buffer is full, the loop body can never run. + for (size_t i = (size_t)(block->compressed_size); i & 3; ++i) { + assert(*out_pos < out_size); + out[(*out_pos)++] = 0x00; + } + + // If there's no Check field, we are done now. + if (check_size > 0) { + // Calculate the integrity check. We reserved space for + // the Check field earlier so we don't need to check for + // available output space here. + lzma_check_state check; + lzma_check_init(&check, block->check); + lzma_check_update(&check, block->check, in, in_size); + lzma_check_finish(&check, block->check); + + memcpy(block->raw_check, check.buffer.u8, check_size); + memcpy(out + *out_pos, check.buffer.u8, check_size); + *out_pos += check_size; + } + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_block_buffer_encode(lzma_block *block, const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + return block_buffer_encode(block, allocator, + in, in_size, out, out_pos, out_size, true); +} + + +#ifdef HAVE_SYMBOL_VERSIONS_LINUX +// This is for compatibility with binaries linked against liblzma that +// has been patched with xz-5.2.2-compat-libs.patch from RHEL/CentOS 7. +LZMA_SYMVER_API("lzma_block_uncomp_encode@XZ_5.2.2", + lzma_ret, lzma_block_uncomp_encode_522)(lzma_block *block, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result + __attribute__((__alias__("lzma_block_uncomp_encode_52"))); + +LZMA_SYMVER_API("lzma_block_uncomp_encode@@XZ_5.2", + lzma_ret, lzma_block_uncomp_encode_52)(lzma_block *block, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) + lzma_nothrow lzma_attr_warn_unused_result; + +#define lzma_block_uncomp_encode lzma_block_uncomp_encode_52 +#endif +extern LZMA_API(lzma_ret) +lzma_block_uncomp_encode(lzma_block *block, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // It won't allocate any memory from heap so no need + // for lzma_allocator. + return block_buffer_encode(block, NULL, + in, in_size, out, out_pos, out_size, false); +} diff --git a/src/liblzma/common/block_buffer_encoder.h b/src/liblzma/common/block_buffer_encoder.h new file mode 100644 index 0000000..653207f --- /dev/null +++ b/src/liblzma/common/block_buffer_encoder.h @@ -0,0 +1,24 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_buffer_encoder.h +/// \brief Single-call .xz Block encoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_BLOCK_BUFFER_ENCODER_H +#define LZMA_BLOCK_BUFFER_ENCODER_H + +#include "common.h" + + +/// uint64_t version of lzma_block_buffer_bound(). It is used by +/// stream_encoder_mt.c. Probably the original lzma_block_buffer_bound() +/// should have been 64-bit, but fixing it would break the ABI. +extern uint64_t lzma_block_buffer_bound64(uint64_t uncompressed_size); + +#endif diff --git a/src/liblzma/common/block_decoder.c b/src/liblzma/common/block_decoder.c new file mode 100644 index 0000000..4827e0f --- /dev/null +++ b/src/liblzma/common/block_decoder.c @@ -0,0 +1,286 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_decoder.c +/// \brief Decodes .xz Blocks +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "block_decoder.h" +#include "filter_decoder.h" +#include "check.h" + + +typedef struct { + enum { + SEQ_CODE, + SEQ_PADDING, + SEQ_CHECK, + } sequence; + + /// The filters in the chain; initialized with lzma_raw_decoder_init(). + lzma_next_coder next; + + /// Decoding options; we also write Compressed Size and Uncompressed + /// Size back to this structure when the decoding has been finished. + lzma_block *block; + + /// Compressed Size calculated while decoding + lzma_vli compressed_size; + + /// Uncompressed Size calculated while decoding + lzma_vli uncompressed_size; + + /// Maximum allowed Compressed Size; this takes into account the + /// size of the Block Header and Check fields when Compressed Size + /// is unknown. + lzma_vli compressed_limit; + + /// Maximum allowed Uncompressed Size. + lzma_vli uncompressed_limit; + + /// Position when reading the Check field + size_t check_pos; + + /// Check of the uncompressed data + lzma_check_state check; + + /// True if the integrity check won't be calculated and verified. + bool ignore_check; +} lzma_block_coder; + + +static inline bool +is_size_valid(lzma_vli size, lzma_vli reference) +{ + return reference == LZMA_VLI_UNKNOWN || reference == size; +} + + +static lzma_ret +block_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_block_coder *coder = coder_ptr; + + switch (coder->sequence) { + case SEQ_CODE: { + const size_t in_start = *in_pos; + const size_t out_start = *out_pos; + + // Limit the amount of input and output space that we give + // to the raw decoder based on the information we have + // (or don't have) from Block Header. + const size_t in_stop = *in_pos + (size_t)my_min( + in_size - *in_pos, + coder->compressed_limit - coder->compressed_size); + const size_t out_stop = *out_pos + (size_t)my_min( + out_size - *out_pos, + coder->uncompressed_limit - coder->uncompressed_size); + + const lzma_ret ret = coder->next.code(coder->next.coder, + allocator, in, in_pos, in_stop, + out, out_pos, out_stop, action); + + const size_t in_used = *in_pos - in_start; + const size_t out_used = *out_pos - out_start; + + // Because we have limited the input and output sizes, + // we know that these cannot grow too big or overflow. + coder->compressed_size += in_used; + coder->uncompressed_size += out_used; + + if (ret == LZMA_OK) { + const bool comp_done = coder->compressed_size + == coder->block->compressed_size; + const bool uncomp_done = coder->uncompressed_size + == coder->block->uncompressed_size; + + // If both input and output amounts match the sizes + // in Block Header but we still got LZMA_OK instead + // of LZMA_STREAM_END, the file is broken. + if (comp_done && uncomp_done) + return LZMA_DATA_ERROR; + + // If the decoder has consumed all the input that it + // needs but it still couldn't fill the output buffer + // or return LZMA_STREAM_END, the file is broken. + if (comp_done && *out_pos < out_size) + return LZMA_DATA_ERROR; + + // If the decoder has produced all the output but + // it still didn't return LZMA_STREAM_END or consume + // more input (for example, detecting an end of + // payload marker may need more input but produce + // no output) the file is broken. + if (uncomp_done && *in_pos < in_size) + return LZMA_DATA_ERROR; + } + + if (!coder->ignore_check) + lzma_check_update(&coder->check, coder->block->check, + out + out_start, out_used); + + if (ret != LZMA_STREAM_END) + return ret; + + // Compressed and Uncompressed Sizes are now at their final + // values. Verify that they match the values given to us. + if (!is_size_valid(coder->compressed_size, + coder->block->compressed_size) + || !is_size_valid(coder->uncompressed_size, + coder->block->uncompressed_size)) + return LZMA_DATA_ERROR; + + // Copy the values into coder->block. The caller + // may use this information to construct Index. + coder->block->compressed_size = coder->compressed_size; + coder->block->uncompressed_size = coder->uncompressed_size; + + coder->sequence = SEQ_PADDING; + } + + // Fall through + + case SEQ_PADDING: + // Compressed Data is padded to a multiple of four bytes. + while (coder->compressed_size & 3) { + if (*in_pos >= in_size) + return LZMA_OK; + + // We use compressed_size here just get the Padding + // right. The actual Compressed Size was stored to + // coder->block already, and won't be modified by + // us anymore. + ++coder->compressed_size; + + if (in[(*in_pos)++] != 0x00) + return LZMA_DATA_ERROR; + } + + if (coder->block->check == LZMA_CHECK_NONE) + return LZMA_STREAM_END; + + if (!coder->ignore_check) + lzma_check_finish(&coder->check, coder->block->check); + + coder->sequence = SEQ_CHECK; + + // Fall through + + case SEQ_CHECK: { + const size_t check_size = lzma_check_size(coder->block->check); + lzma_bufcpy(in, in_pos, in_size, coder->block->raw_check, + &coder->check_pos, check_size); + if (coder->check_pos < check_size) + return LZMA_OK; + + // Validate the Check only if we support it. + // coder->check.buffer may be uninitialized + // when the Check ID is not supported. + if (!coder->ignore_check + && lzma_check_is_supported(coder->block->check) + && memcmp(coder->block->raw_check, + coder->check.buffer.u8, + check_size) != 0) + return LZMA_DATA_ERROR; + + return LZMA_STREAM_END; + } + } + + return LZMA_PROG_ERROR; +} + + +static void +block_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_block_coder *coder = coder_ptr; + lzma_next_end(&coder->next, allocator); + lzma_free(coder, allocator); + return; +} + + +extern lzma_ret +lzma_block_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + lzma_block *block) +{ + lzma_next_coder_init(&lzma_block_decoder_init, next, allocator); + + // Validate the options. lzma_block_unpadded_size() does that for us + // except for Uncompressed Size and filters. Filters are validated + // by the raw decoder. + if (lzma_block_unpadded_size(block) == 0 + || !lzma_vli_is_valid(block->uncompressed_size)) + return LZMA_PROG_ERROR; + + // Allocate *next->coder if needed. + lzma_block_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_block_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &block_decode; + next->end = &block_decoder_end; + coder->next = LZMA_NEXT_CODER_INIT; + } + + // Basic initializations + coder->sequence = SEQ_CODE; + coder->block = block; + coder->compressed_size = 0; + coder->uncompressed_size = 0; + + // If Compressed Size is not known, we calculate the maximum allowed + // value so that encoded size of the Block (including Block Padding) + // is still a valid VLI and a multiple of four. + coder->compressed_limit + = block->compressed_size == LZMA_VLI_UNKNOWN + ? (LZMA_VLI_MAX & ~LZMA_VLI_C(3)) + - block->header_size + - lzma_check_size(block->check) + : block->compressed_size; + + // With Uncompressed Size this is simpler. If Block Header lacks + // the size info, then LZMA_VLI_MAX is the maximum possible + // Uncompressed Size. + coder->uncompressed_limit + = block->uncompressed_size == LZMA_VLI_UNKNOWN + ? LZMA_VLI_MAX + : block->uncompressed_size; + + // Initialize the check. It's caller's problem if the Check ID is not + // supported, and the Block decoder cannot verify the Check field. + // Caller can test lzma_check_is_supported(block->check). + coder->check_pos = 0; + lzma_check_init(&coder->check, block->check); + + coder->ignore_check = block->version >= 1 + ? block->ignore_check : false; + + // Initialize the filter chain. + return lzma_raw_decoder_init(&coder->next, allocator, + block->filters); +} + + +extern LZMA_API(lzma_ret) +lzma_block_decoder(lzma_stream *strm, lzma_block *block) +{ + lzma_next_strm_init(lzma_block_decoder_init, strm, block); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/block_decoder.h b/src/liblzma/common/block_decoder.h new file mode 100644 index 0000000..718c5ce --- /dev/null +++ b/src/liblzma/common/block_decoder.h @@ -0,0 +1,22 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_decoder.h +/// \brief Decodes .xz Blocks +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_BLOCK_DECODER_H +#define LZMA_BLOCK_DECODER_H + +#include "common.h" + + +extern lzma_ret lzma_block_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, lzma_block *block); + +#endif diff --git a/src/liblzma/common/block_encoder.c b/src/liblzma/common/block_encoder.c new file mode 100644 index 0000000..520ecc5 --- /dev/null +++ b/src/liblzma/common/block_encoder.c @@ -0,0 +1,224 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_encoder.c +/// \brief Encodes .xz Blocks +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "block_encoder.h" +#include "filter_encoder.h" +#include "check.h" + + +typedef struct { + /// The filters in the chain; initialized with lzma_raw_decoder_init(). + lzma_next_coder next; + + /// Encoding options; we also write Unpadded Size, Compressed Size, + /// and Uncompressed Size back to this structure when the encoding + /// has been finished. + lzma_block *block; + + enum { + SEQ_CODE, + SEQ_PADDING, + SEQ_CHECK, + } sequence; + + /// Compressed Size calculated while encoding + lzma_vli compressed_size; + + /// Uncompressed Size calculated while encoding + lzma_vli uncompressed_size; + + /// Position in the Check field + size_t pos; + + /// Check of the uncompressed data + lzma_check_state check; +} lzma_block_coder; + + +static lzma_ret +block_encode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_block_coder *coder = coder_ptr; + + // Check that our amount of input stays in proper limits. + if (LZMA_VLI_MAX - coder->uncompressed_size < in_size - *in_pos) + return LZMA_DATA_ERROR; + + switch (coder->sequence) { + case SEQ_CODE: { + const size_t in_start = *in_pos; + const size_t out_start = *out_pos; + + const lzma_ret ret = coder->next.code(coder->next.coder, + allocator, in, in_pos, in_size, + out, out_pos, out_size, action); + + const size_t in_used = *in_pos - in_start; + const size_t out_used = *out_pos - out_start; + + if (COMPRESSED_SIZE_MAX - coder->compressed_size < out_used) + return LZMA_DATA_ERROR; + + coder->compressed_size += out_used; + + // No need to check for overflow because we have already + // checked it at the beginning of this function. + coder->uncompressed_size += in_used; + + lzma_check_update(&coder->check, coder->block->check, + in + in_start, in_used); + + if (ret != LZMA_STREAM_END || action == LZMA_SYNC_FLUSH) + return ret; + + assert(*in_pos == in_size); + assert(action == LZMA_FINISH); + + // Copy the values into coder->block. The caller + // may use this information to construct Index. + coder->block->compressed_size = coder->compressed_size; + coder->block->uncompressed_size = coder->uncompressed_size; + + coder->sequence = SEQ_PADDING; + } + + // Fall through + + case SEQ_PADDING: + // Pad Compressed Data to a multiple of four bytes. We can + // use coder->compressed_size for this since we don't need + // it for anything else anymore. + while (coder->compressed_size & 3) { + if (*out_pos >= out_size) + return LZMA_OK; + + out[*out_pos] = 0x00; + ++*out_pos; + ++coder->compressed_size; + } + + if (coder->block->check == LZMA_CHECK_NONE) + return LZMA_STREAM_END; + + lzma_check_finish(&coder->check, coder->block->check); + + coder->sequence = SEQ_CHECK; + + // Fall through + + case SEQ_CHECK: { + const size_t check_size = lzma_check_size(coder->block->check); + lzma_bufcpy(coder->check.buffer.u8, &coder->pos, check_size, + out, out_pos, out_size); + if (coder->pos < check_size) + return LZMA_OK; + + memcpy(coder->block->raw_check, coder->check.buffer.u8, + check_size); + return LZMA_STREAM_END; + } + } + + return LZMA_PROG_ERROR; +} + + +static void +block_encoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_block_coder *coder = coder_ptr; + lzma_next_end(&coder->next, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +block_encoder_update(void *coder_ptr, const lzma_allocator *allocator, + const lzma_filter *filters lzma_attribute((__unused__)), + const lzma_filter *reversed_filters) +{ + lzma_block_coder *coder = coder_ptr; + + if (coder->sequence != SEQ_CODE) + return LZMA_PROG_ERROR; + + return lzma_next_filter_update( + &coder->next, allocator, reversed_filters); +} + + +extern lzma_ret +lzma_block_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + lzma_block *block) +{ + lzma_next_coder_init(&lzma_block_encoder_init, next, allocator); + + if (block == NULL) + return LZMA_PROG_ERROR; + + // The contents of the structure may depend on the version so + // check the version first. + if (block->version > 1) + return LZMA_OPTIONS_ERROR; + + // If the Check ID is not supported, we cannot calculate the check and + // thus not create a proper Block. + if ((unsigned int)(block->check) > LZMA_CHECK_ID_MAX) + return LZMA_PROG_ERROR; + + if (!lzma_check_is_supported(block->check)) + return LZMA_UNSUPPORTED_CHECK; + + // Allocate and initialize *next->coder if needed. + lzma_block_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_block_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &block_encode; + next->end = &block_encoder_end; + next->update = &block_encoder_update; + coder->next = LZMA_NEXT_CODER_INIT; + } + + // Basic initializations + coder->sequence = SEQ_CODE; + coder->block = block; + coder->compressed_size = 0; + coder->uncompressed_size = 0; + coder->pos = 0; + + // Initialize the check + lzma_check_init(&coder->check, block->check); + + // Initialize the requested filters. + return lzma_raw_encoder_init(&coder->next, allocator, block->filters); +} + + +extern LZMA_API(lzma_ret) +lzma_block_encoder(lzma_stream *strm, lzma_block *block) +{ + lzma_next_strm_init(lzma_block_encoder_init, strm, block); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_SYNC_FLUSH] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/block_encoder.h b/src/liblzma/common/block_encoder.h new file mode 100644 index 0000000..bd97c18 --- /dev/null +++ b/src/liblzma/common/block_encoder.h @@ -0,0 +1,47 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_encoder.h +/// \brief Encodes .xz Blocks +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_BLOCK_ENCODER_H +#define LZMA_BLOCK_ENCODER_H + +#include "common.h" + + +/// \brief Biggest Compressed Size value that the Block encoder supports +/// +/// The maximum size of a single Block is limited by the maximum size of +/// a Stream, which in theory is 2^63 - 3 bytes (i.e. LZMA_VLI_MAX - 3). +/// While the size is really big and no one should hit it in practice, we +/// take it into account in some places anyway to catch some errors e.g. if +/// application passes insanely big value to some function. +/// +/// We could take into account the headers etc. to determine the exact +/// maximum size of the Compressed Data field, but the complexity would give +/// us nothing useful. Instead, limit the size of Compressed Data so that +/// even with biggest possible Block Header and Check fields the total +/// encoded size of the Block stays as a valid VLI. This doesn't guarantee +/// that the size of the Stream doesn't grow too big, but that problem is +/// taken care outside the Block handling code. +/// +/// ~LZMA_VLI_C(3) is to guarantee that if we need padding at the end of +/// the Compressed Data field, it will still stay in the proper limit. +/// +/// This constant is in this file because it is needed in both +/// block_encoder.c and block_buffer_encoder.c. +#define COMPRESSED_SIZE_MAX ((LZMA_VLI_MAX - LZMA_BLOCK_HEADER_SIZE_MAX \ + - LZMA_CHECK_SIZE_MAX) & ~LZMA_VLI_C(3)) + + +extern lzma_ret lzma_block_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, lzma_block *block); + +#endif diff --git a/src/liblzma/common/block_header_decoder.c b/src/liblzma/common/block_header_decoder.c new file mode 100644 index 0000000..c4935dc --- /dev/null +++ b/src/liblzma/common/block_header_decoder.c @@ -0,0 +1,115 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_header_decoder.c +/// \brief Decodes Block Header from .xz files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "check.h" + + +extern LZMA_API(lzma_ret) +lzma_block_header_decode(lzma_block *block, + const lzma_allocator *allocator, const uint8_t *in) +{ + // NOTE: We consider the header to be corrupt not only when the + // CRC32 doesn't match, but also when variable-length integers + // are invalid or over 63 bits, or if the header is too small + // to contain the claimed information. + + // Catch unexpected NULL pointers. + if (block == NULL || block->filters == NULL || in == NULL) + return LZMA_PROG_ERROR; + + // Initialize the filter options array. This way the caller can + // safely free() the options even if an error occurs in this function. + for (size_t i = 0; i <= LZMA_FILTERS_MAX; ++i) { + block->filters[i].id = LZMA_VLI_UNKNOWN; + block->filters[i].options = NULL; + } + + // Versions 0 and 1 are supported. If a newer version was specified, + // we need to downgrade it. + if (block->version > 1) + block->version = 1; + + // This isn't a Block Header option, but since the decompressor will + // read it if version >= 1, it's better to initialize it here than + // to expect the caller to do it since in almost all cases this + // should be false. + block->ignore_check = false; + + // Validate Block Header Size and Check type. The caller must have + // already set these, so it is a programming error if this test fails. + if (lzma_block_header_size_decode(in[0]) != block->header_size + || (unsigned int)(block->check) > LZMA_CHECK_ID_MAX) + return LZMA_PROG_ERROR; + + // Exclude the CRC32 field. + const size_t in_size = block->header_size - 4; + + // Verify CRC32 + if (lzma_crc32(in, in_size, 0) != read32le(in + in_size)) { +#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION + return LZMA_DATA_ERROR; +#endif + } + + // Check for unsupported flags. + if (in[1] & 0x3C) + return LZMA_OPTIONS_ERROR; + + // Start after the Block Header Size and Block Flags fields. + size_t in_pos = 2; + + // Compressed Size + if (in[1] & 0x40) { + return_if_error(lzma_vli_decode(&block->compressed_size, + NULL, in, &in_pos, in_size)); + + // Validate Compressed Size. This checks that it isn't zero + // and that the total size of the Block is a valid VLI. + if (lzma_block_unpadded_size(block) == 0) + return LZMA_DATA_ERROR; + } else { + block->compressed_size = LZMA_VLI_UNKNOWN; + } + + // Uncompressed Size + if (in[1] & 0x80) + return_if_error(lzma_vli_decode(&block->uncompressed_size, + NULL, in, &in_pos, in_size)); + else + block->uncompressed_size = LZMA_VLI_UNKNOWN; + + // Filter Flags + const size_t filter_count = (in[1] & 3U) + 1; + for (size_t i = 0; i < filter_count; ++i) { + const lzma_ret ret = lzma_filter_flags_decode( + &block->filters[i], allocator, + in, &in_pos, in_size); + if (ret != LZMA_OK) { + lzma_filters_free(block->filters, allocator); + return ret; + } + } + + // Padding + while (in_pos < in_size) { + if (in[in_pos++] != 0x00) { + lzma_filters_free(block->filters, allocator); + + // Possibly some new field present so use + // LZMA_OPTIONS_ERROR instead of LZMA_DATA_ERROR. + return LZMA_OPTIONS_ERROR; + } + } + + return LZMA_OK; +} diff --git a/src/liblzma/common/block_header_encoder.c b/src/liblzma/common/block_header_encoder.c new file mode 100644 index 0000000..160425d --- /dev/null +++ b/src/liblzma/common/block_header_encoder.c @@ -0,0 +1,132 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_header_encoder.c +/// \brief Encodes Block Header for .xz files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "check.h" + + +extern LZMA_API(lzma_ret) +lzma_block_header_size(lzma_block *block) +{ + if (block->version > 1) + return LZMA_OPTIONS_ERROR; + + // Block Header Size + Block Flags + CRC32. + uint32_t size = 1 + 1 + 4; + + // Compressed Size + if (block->compressed_size != LZMA_VLI_UNKNOWN) { + const uint32_t add = lzma_vli_size(block->compressed_size); + if (add == 0 || block->compressed_size == 0) + return LZMA_PROG_ERROR; + + size += add; + } + + // Uncompressed Size + if (block->uncompressed_size != LZMA_VLI_UNKNOWN) { + const uint32_t add = lzma_vli_size(block->uncompressed_size); + if (add == 0) + return LZMA_PROG_ERROR; + + size += add; + } + + // List of Filter Flags + if (block->filters == NULL || block->filters[0].id == LZMA_VLI_UNKNOWN) + return LZMA_PROG_ERROR; + + for (size_t i = 0; block->filters[i].id != LZMA_VLI_UNKNOWN; ++i) { + // Don't allow too many filters. + if (i == LZMA_FILTERS_MAX) + return LZMA_PROG_ERROR; + + uint32_t add; + return_if_error(lzma_filter_flags_size(&add, + block->filters + i)); + + size += add; + } + + // Pad to a multiple of four bytes. + block->header_size = (size + 3) & ~UINT32_C(3); + + // NOTE: We don't verify that the encoded size of the Block stays + // within limits. This is because it is possible that we are called + // with exaggerated Compressed Size (e.g. LZMA_VLI_MAX) to reserve + // space for Block Header, and later called again with lower, + // real values. + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_block_header_encode(const lzma_block *block, uint8_t *out) +{ + // Validate everything but filters. + if (lzma_block_unpadded_size(block) == 0 + || !lzma_vli_is_valid(block->uncompressed_size)) + return LZMA_PROG_ERROR; + + // Indicate the size of the buffer _excluding_ the CRC32 field. + const size_t out_size = block->header_size - 4; + + // Store the Block Header Size. + out[0] = out_size / 4; + + // We write Block Flags in pieces. + out[1] = 0x00; + size_t out_pos = 2; + + // Compressed Size + if (block->compressed_size != LZMA_VLI_UNKNOWN) { + return_if_error(lzma_vli_encode(block->compressed_size, NULL, + out, &out_pos, out_size)); + + out[1] |= 0x40; + } + + // Uncompressed Size + if (block->uncompressed_size != LZMA_VLI_UNKNOWN) { + return_if_error(lzma_vli_encode(block->uncompressed_size, NULL, + out, &out_pos, out_size)); + + out[1] |= 0x80; + } + + // Filter Flags + if (block->filters == NULL || block->filters[0].id == LZMA_VLI_UNKNOWN) + return LZMA_PROG_ERROR; + + size_t filter_count = 0; + do { + // There can be a maximum of four filters. + if (filter_count == LZMA_FILTERS_MAX) + return LZMA_PROG_ERROR; + + return_if_error(lzma_filter_flags_encode( + block->filters + filter_count, + out, &out_pos, out_size)); + + } while (block->filters[++filter_count].id != LZMA_VLI_UNKNOWN); + + out[1] |= filter_count - 1; + + // Padding + memzero(out + out_pos, out_size - out_pos); + + // CRC32 + write32le(out + out_size, lzma_crc32(out, out_size, 0)); + + return LZMA_OK; +} diff --git a/src/liblzma/common/block_util.c b/src/liblzma/common/block_util.c new file mode 100644 index 0000000..acb3111 --- /dev/null +++ b/src/liblzma/common/block_util.c @@ -0,0 +1,90 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file block_util.c +/// \brief Utility functions to handle lzma_block +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "index.h" + + +extern LZMA_API(lzma_ret) +lzma_block_compressed_size(lzma_block *block, lzma_vli unpadded_size) +{ + // Validate everything but Uncompressed Size and filters. + if (lzma_block_unpadded_size(block) == 0) + return LZMA_PROG_ERROR; + + const uint32_t container_size = block->header_size + + lzma_check_size(block->check); + + // Validate that Compressed Size will be greater than zero. + if (unpadded_size <= container_size) + return LZMA_DATA_ERROR; + + // Calculate what Compressed Size is supposed to be. + // If Compressed Size was present in Block Header, + // compare that the new value matches it. + const lzma_vli compressed_size = unpadded_size - container_size; + if (block->compressed_size != LZMA_VLI_UNKNOWN + && block->compressed_size != compressed_size) + return LZMA_DATA_ERROR; + + block->compressed_size = compressed_size; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_vli) +lzma_block_unpadded_size(const lzma_block *block) +{ + // Validate the values that we are interested in i.e. all but + // Uncompressed Size and the filters. + // + // NOTE: This function is used for validation too, so it is + // essential that these checks are always done even if + // Compressed Size is unknown. + if (block == NULL || block->version > 1 + || block->header_size < LZMA_BLOCK_HEADER_SIZE_MIN + || block->header_size > LZMA_BLOCK_HEADER_SIZE_MAX + || (block->header_size & 3) + || !lzma_vli_is_valid(block->compressed_size) + || block->compressed_size == 0 + || (unsigned int)(block->check) > LZMA_CHECK_ID_MAX) + return 0; + + // If Compressed Size is unknown, return that we cannot know + // size of the Block either. + if (block->compressed_size == LZMA_VLI_UNKNOWN) + return LZMA_VLI_UNKNOWN; + + // Calculate Unpadded Size and validate it. + const lzma_vli unpadded_size = block->compressed_size + + block->header_size + + lzma_check_size(block->check); + + assert(unpadded_size >= UNPADDED_SIZE_MIN); + if (unpadded_size > UNPADDED_SIZE_MAX) + return 0; + + return unpadded_size; +} + + +extern LZMA_API(lzma_vli) +lzma_block_total_size(const lzma_block *block) +{ + lzma_vli unpadded_size = lzma_block_unpadded_size(block); + + if (unpadded_size != LZMA_VLI_UNKNOWN) + unpadded_size = vli_ceil4(unpadded_size); + + return unpadded_size; +} diff --git a/src/liblzma/common/common.c b/src/liblzma/common/common.c new file mode 100644 index 0000000..a708fdf --- /dev/null +++ b/src/liblzma/common/common.c @@ -0,0 +1,471 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file common.c +/// \brief Common functions needed in many places in liblzma +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +///////////// +// Version // +///////////// + +extern LZMA_API(uint32_t) +lzma_version_number(void) +{ + return LZMA_VERSION; +} + + +extern LZMA_API(const char *) +lzma_version_string(void) +{ + return LZMA_VERSION_STRING; +} + + +/////////////////////// +// Memory allocation // +/////////////////////// + +extern void * lzma_attribute((__malloc__)) lzma_attr_alloc_size(1) +lzma_alloc(size_t size, const lzma_allocator *allocator) +{ + // Some malloc() variants return NULL if called with size == 0. + if (size == 0) + size = 1; + + void *ptr; + + if (allocator != NULL && allocator->alloc != NULL) + ptr = allocator->alloc(allocator->opaque, 1, size); + else + ptr = malloc(size); + + return ptr; +} + + +extern void * lzma_attribute((__malloc__)) lzma_attr_alloc_size(1) +lzma_alloc_zero(size_t size, const lzma_allocator *allocator) +{ + // Some calloc() variants return NULL if called with size == 0. + if (size == 0) + size = 1; + + void *ptr; + + if (allocator != NULL && allocator->alloc != NULL) { + ptr = allocator->alloc(allocator->opaque, 1, size); + if (ptr != NULL) + memzero(ptr, size); + } else { + ptr = calloc(1, size); + } + + return ptr; +} + + +extern void +lzma_free(void *ptr, const lzma_allocator *allocator) +{ + if (allocator != NULL && allocator->free != NULL) + allocator->free(allocator->opaque, ptr); + else + free(ptr); + + return; +} + + +////////// +// Misc // +////////// + +extern size_t +lzma_bufcpy(const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size) +{ + const size_t in_avail = in_size - *in_pos; + const size_t out_avail = out_size - *out_pos; + const size_t copy_size = my_min(in_avail, out_avail); + + // Call memcpy() only if there is something to copy. If there is + // nothing to copy, in or out might be NULL and then the memcpy() + // call would trigger undefined behavior. + if (copy_size > 0) + memcpy(out + *out_pos, in + *in_pos, copy_size); + + *in_pos += copy_size; + *out_pos += copy_size; + + return copy_size; +} + + +extern lzma_ret +lzma_next_filter_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + lzma_next_coder_init(filters[0].init, next, allocator); + next->id = filters[0].id; + return filters[0].init == NULL + ? LZMA_OK : filters[0].init(next, allocator, filters); +} + + +extern lzma_ret +lzma_next_filter_update(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *reversed_filters) +{ + // Check that the application isn't trying to change the Filter ID. + // End of filters is indicated with LZMA_VLI_UNKNOWN in both + // reversed_filters[0].id and next->id. + if (reversed_filters[0].id != next->id) + return LZMA_PROG_ERROR; + + if (reversed_filters[0].id == LZMA_VLI_UNKNOWN) + return LZMA_OK; + + assert(next->update != NULL); + return next->update(next->coder, allocator, NULL, reversed_filters); +} + + +extern void +lzma_next_end(lzma_next_coder *next, const lzma_allocator *allocator) +{ + if (next->init != (uintptr_t)(NULL)) { + // To avoid tiny end functions that simply call + // lzma_free(coder, allocator), we allow leaving next->end + // NULL and call lzma_free() here. + if (next->end != NULL) + next->end(next->coder, allocator); + else + lzma_free(next->coder, allocator); + + // Reset the variables so the we don't accidentally think + // that it is an already initialized coder. + *next = LZMA_NEXT_CODER_INIT; + } + + return; +} + + +////////////////////////////////////// +// External to internal API wrapper // +////////////////////////////////////// + +extern lzma_ret +lzma_strm_init(lzma_stream *strm) +{ + if (strm == NULL) + return LZMA_PROG_ERROR; + + if (strm->internal == NULL) { + strm->internal = lzma_alloc(sizeof(lzma_internal), + strm->allocator); + if (strm->internal == NULL) + return LZMA_MEM_ERROR; + + strm->internal->next = LZMA_NEXT_CODER_INIT; + } + + memzero(strm->internal->supported_actions, + sizeof(strm->internal->supported_actions)); + strm->internal->sequence = ISEQ_RUN; + strm->internal->allow_buf_error = false; + + strm->total_in = 0; + strm->total_out = 0; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_code(lzma_stream *strm, lzma_action action) +{ + // Sanity checks + if ((strm->next_in == NULL && strm->avail_in != 0) + || (strm->next_out == NULL && strm->avail_out != 0) + || strm->internal == NULL + || strm->internal->next.code == NULL + || (unsigned int)(action) > LZMA_ACTION_MAX + || !strm->internal->supported_actions[action]) + return LZMA_PROG_ERROR; + + // Check if unsupported members have been set to non-zero or non-NULL, + // which would indicate that some new feature is wanted. + if (strm->reserved_ptr1 != NULL + || strm->reserved_ptr2 != NULL + || strm->reserved_ptr3 != NULL + || strm->reserved_ptr4 != NULL + || strm->reserved_int2 != 0 + || strm->reserved_int3 != 0 + || strm->reserved_int4 != 0 + || strm->reserved_enum1 != LZMA_RESERVED_ENUM + || strm->reserved_enum2 != LZMA_RESERVED_ENUM) + return LZMA_OPTIONS_ERROR; + + switch (strm->internal->sequence) { + case ISEQ_RUN: + switch (action) { + case LZMA_RUN: + break; + + case LZMA_SYNC_FLUSH: + strm->internal->sequence = ISEQ_SYNC_FLUSH; + break; + + case LZMA_FULL_FLUSH: + strm->internal->sequence = ISEQ_FULL_FLUSH; + break; + + case LZMA_FINISH: + strm->internal->sequence = ISEQ_FINISH; + break; + + case LZMA_FULL_BARRIER: + strm->internal->sequence = ISEQ_FULL_BARRIER; + break; + } + + break; + + case ISEQ_SYNC_FLUSH: + // The same action must be used until we return + // LZMA_STREAM_END, and the amount of input must not change. + if (action != LZMA_SYNC_FLUSH + || strm->internal->avail_in != strm->avail_in) + return LZMA_PROG_ERROR; + + break; + + case ISEQ_FULL_FLUSH: + if (action != LZMA_FULL_FLUSH + || strm->internal->avail_in != strm->avail_in) + return LZMA_PROG_ERROR; + + break; + + case ISEQ_FINISH: + if (action != LZMA_FINISH + || strm->internal->avail_in != strm->avail_in) + return LZMA_PROG_ERROR; + + break; + + case ISEQ_FULL_BARRIER: + if (action != LZMA_FULL_BARRIER + || strm->internal->avail_in != strm->avail_in) + return LZMA_PROG_ERROR; + + break; + + case ISEQ_END: + return LZMA_STREAM_END; + + case ISEQ_ERROR: + default: + return LZMA_PROG_ERROR; + } + + size_t in_pos = 0; + size_t out_pos = 0; + lzma_ret ret = strm->internal->next.code( + strm->internal->next.coder, strm->allocator, + strm->next_in, &in_pos, strm->avail_in, + strm->next_out, &out_pos, strm->avail_out, action); + + strm->next_in += in_pos; + strm->avail_in -= in_pos; + strm->total_in += in_pos; + + strm->next_out += out_pos; + strm->avail_out -= out_pos; + strm->total_out += out_pos; + + strm->internal->avail_in = strm->avail_in; + + switch (ret) { + case LZMA_OK: + // Don't return LZMA_BUF_ERROR when it happens the first time. + // This is to avoid returning LZMA_BUF_ERROR when avail_out + // was zero but still there was no more data left to written + // to next_out. + if (out_pos == 0 && in_pos == 0) { + if (strm->internal->allow_buf_error) + ret = LZMA_BUF_ERROR; + else + strm->internal->allow_buf_error = true; + } else { + strm->internal->allow_buf_error = false; + } + break; + + case LZMA_TIMED_OUT: + strm->internal->allow_buf_error = false; + ret = LZMA_OK; + break; + + case LZMA_SEEK_NEEDED: + strm->internal->allow_buf_error = false; + + // If LZMA_FINISH was used, reset it back to the + // LZMA_RUN-based state so that new input can be supplied + // by the application. + if (strm->internal->sequence == ISEQ_FINISH) + strm->internal->sequence = ISEQ_RUN; + + break; + + case LZMA_STREAM_END: + if (strm->internal->sequence == ISEQ_SYNC_FLUSH + || strm->internal->sequence == ISEQ_FULL_FLUSH + || strm->internal->sequence + == ISEQ_FULL_BARRIER) + strm->internal->sequence = ISEQ_RUN; + else + strm->internal->sequence = ISEQ_END; + + // Fall through + + case LZMA_NO_CHECK: + case LZMA_UNSUPPORTED_CHECK: + case LZMA_GET_CHECK: + case LZMA_MEMLIMIT_ERROR: + // Something else than LZMA_OK, but not a fatal error, + // that is, coding may be continued (except if ISEQ_END). + strm->internal->allow_buf_error = false; + break; + + default: + // All the other errors are fatal; coding cannot be continued. + assert(ret != LZMA_BUF_ERROR); + strm->internal->sequence = ISEQ_ERROR; + break; + } + + return ret; +} + + +extern LZMA_API(void) +lzma_end(lzma_stream *strm) +{ + if (strm != NULL && strm->internal != NULL) { + lzma_next_end(&strm->internal->next, strm->allocator); + lzma_free(strm->internal, strm->allocator); + strm->internal = NULL; + } + + return; +} + + +#ifdef HAVE_SYMBOL_VERSIONS_LINUX +// This is for compatibility with binaries linked against liblzma that +// has been patched with xz-5.2.2-compat-libs.patch from RHEL/CentOS 7. +LZMA_SYMVER_API("lzma_get_progress@XZ_5.2.2", + void, lzma_get_progress_522)(lzma_stream *strm, + uint64_t *progress_in, uint64_t *progress_out) lzma_nothrow + __attribute__((__alias__("lzma_get_progress_52"))); + +LZMA_SYMVER_API("lzma_get_progress@@XZ_5.2", + void, lzma_get_progress_52)(lzma_stream *strm, + uint64_t *progress_in, uint64_t *progress_out) lzma_nothrow; + +#define lzma_get_progress lzma_get_progress_52 +#endif +extern LZMA_API(void) +lzma_get_progress(lzma_stream *strm, + uint64_t *progress_in, uint64_t *progress_out) +{ + if (strm->internal->next.get_progress != NULL) { + strm->internal->next.get_progress(strm->internal->next.coder, + progress_in, progress_out); + } else { + *progress_in = strm->total_in; + *progress_out = strm->total_out; + } + + return; +} + + +extern LZMA_API(lzma_check) +lzma_get_check(const lzma_stream *strm) +{ + // Return LZMA_CHECK_NONE if we cannot know the check type. + // It's a bug in the application if this happens. + if (strm->internal->next.get_check == NULL) + return LZMA_CHECK_NONE; + + return strm->internal->next.get_check(strm->internal->next.coder); +} + + +extern LZMA_API(uint64_t) +lzma_memusage(const lzma_stream *strm) +{ + uint64_t memusage; + uint64_t old_memlimit; + + if (strm == NULL || strm->internal == NULL + || strm->internal->next.memconfig == NULL + || strm->internal->next.memconfig( + strm->internal->next.coder, + &memusage, &old_memlimit, 0) != LZMA_OK) + return 0; + + return memusage; +} + + +extern LZMA_API(uint64_t) +lzma_memlimit_get(const lzma_stream *strm) +{ + uint64_t old_memlimit; + uint64_t memusage; + + if (strm == NULL || strm->internal == NULL + || strm->internal->next.memconfig == NULL + || strm->internal->next.memconfig( + strm->internal->next.coder, + &memusage, &old_memlimit, 0) != LZMA_OK) + return 0; + + return old_memlimit; +} + + +extern LZMA_API(lzma_ret) +lzma_memlimit_set(lzma_stream *strm, uint64_t new_memlimit) +{ + // Dummy variables to simplify memconfig functions + uint64_t old_memlimit; + uint64_t memusage; + + if (strm == NULL || strm->internal == NULL + || strm->internal->next.memconfig == NULL) + return LZMA_PROG_ERROR; + + // Zero is a special value that cannot be used as an actual limit. + // If 0 was specified, use 1 instead. + if (new_memlimit == 0) + new_memlimit = 1; + + return strm->internal->next.memconfig(strm->internal->next.coder, + &memusage, &old_memlimit, new_memlimit); +} diff --git a/src/liblzma/common/common.h b/src/liblzma/common/common.h new file mode 100644 index 0000000..11fec52 --- /dev/null +++ b/src/liblzma/common/common.h @@ -0,0 +1,385 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file common.h +/// \brief Definitions common to the whole liblzma library +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_COMMON_H +#define LZMA_COMMON_H + +#include "sysdefs.h" +#include "mythread.h" +#include "tuklib_integer.h" + +#if defined(_WIN32) || defined(__CYGWIN__) +# ifdef DLL_EXPORT +# define LZMA_API_EXPORT __declspec(dllexport) +# else +# define LZMA_API_EXPORT +# endif +// Don't use ifdef or defined() below. +#elif HAVE_VISIBILITY +# define LZMA_API_EXPORT __attribute__((__visibility__("default"))) +#else +# define LZMA_API_EXPORT +#endif + +#define LZMA_API(type) LZMA_API_EXPORT type LZMA_API_CALL + +#include "lzma.h" + +// This is for detecting modern GCC and Clang attributes +// like __symver__ in GCC >= 10. +#ifdef __has_attribute +# define lzma_has_attribute(attr) __has_attribute(attr) +#else +# define lzma_has_attribute(attr) 0 +#endif + +// The extra symbol versioning in the C files may only be used when +// building a shared library. If HAVE_SYMBOL_VERSIONS_LINUX is defined +// to 2 then symbol versioning is done only if also PIC is defined. +// By default Libtool defines PIC when building a shared library and +// doesn't define it when building a static library but it can be +// overriden with --with-pic and --without-pic. configure let's rely +// on PIC if neither --with-pic or --without-pic was used. +#if defined(HAVE_SYMBOL_VERSIONS_LINUX) \ + && (HAVE_SYMBOL_VERSIONS_LINUX == 2 && !defined(PIC)) +# undef HAVE_SYMBOL_VERSIONS_LINUX +#endif + +#ifdef HAVE_SYMBOL_VERSIONS_LINUX +// To keep link-time optimization (LTO, -flto) working with GCC, +// the __symver__ attribute must be used instead of __asm__(".symver ..."). +// Otherwise the symbol versions may be lost, resulting in broken liblzma +// that has wrong default versions in the exported symbol list! +// The attribute was added in GCC 10; LTO with older GCC is not supported. +// +// To keep -Wmissing-prototypes happy, use LZMA_SYMVER_API only with function +// declarations (including those with __alias__ attribute) and LZMA_API with +// the function definitions. This means a little bit of silly copy-and-paste +// between declarations and definitions though. +// +// As of GCC 12.2, the __symver__ attribute supports only @ and @@ but the +// very convenient @@@ isn't supported (it's supported by GNU assembler +// since 2000). When using @@ instead of @@@, the internal name must not be +// the same as the external name to avoid problems in some situations. This +// is why "#define foo_52 foo" is needed for the default symbol versions. +// +// __has_attribute is supported before GCC 10 and it is supported in Clang 14 +// too (which doesn't support __symver__) so use it to detect if __symver__ +// is available. This should be far more reliable than looking at compiler +// version macros as nowadays especially __GNUC__ is defined by many compilers. +# if lzma_has_attribute(__symver__) +# define LZMA_SYMVER_API(extnamever, type, intname) \ + extern __attribute__((__symver__(extnamever))) \ + LZMA_API(type) intname +# else +# define LZMA_SYMVER_API(extnamever, type, intname) \ + __asm__(".symver " #intname "," extnamever); \ + extern LZMA_API(type) intname +# endif +#endif + +// These allow helping the compiler in some often-executed branches, whose +// result is almost always the same. +#ifdef __GNUC__ +# define likely(expr) __builtin_expect(expr, true) +# define unlikely(expr) __builtin_expect(expr, false) +#else +# define likely(expr) (expr) +# define unlikely(expr) (expr) +#endif + + +/// Size of temporary buffers needed in some filters +#define LZMA_BUFFER_SIZE 4096 + + +/// Maximum number of worker threads within one multithreaded component. +/// The limit exists solely to make it simpler to prevent integer overflows +/// when allocating structures etc. This should be big enough for now... +/// the code won't scale anywhere close to this number anyway. +#define LZMA_THREADS_MAX 16384 + + +/// Starting value for memory usage estimates. Instead of calculating size +/// of _every_ structure and taking into account malloc() overhead etc., we +/// add a base size to all memory usage estimates. It's not very accurate +/// but should be easily good enough. +#define LZMA_MEMUSAGE_BASE (UINT64_C(1) << 15) + +/// Start of internal Filter ID space. These IDs must never be used +/// in Streams. +#define LZMA_FILTER_RESERVED_START (LZMA_VLI_C(1) << 62) + + +/// Supported flags that can be passed to lzma_stream_decoder(), +/// lzma_auto_decoder(), or lzma_stream_decoder_mt(). +#define LZMA_SUPPORTED_FLAGS \ + ( LZMA_TELL_NO_CHECK \ + | LZMA_TELL_UNSUPPORTED_CHECK \ + | LZMA_TELL_ANY_CHECK \ + | LZMA_IGNORE_CHECK \ + | LZMA_CONCATENATED \ + | LZMA_FAIL_FAST ) + + +/// Largest valid lzma_action value as unsigned integer. +#define LZMA_ACTION_MAX ((unsigned int)(LZMA_FULL_BARRIER)) + + +/// Special return value (lzma_ret) to indicate that a timeout was reached +/// and lzma_code() must not return LZMA_BUF_ERROR. This is converted to +/// LZMA_OK in lzma_code(). +#define LZMA_TIMED_OUT LZMA_RET_INTERNAL1 + +/// Special return value (lzma_ret) for use in stream_decoder_mt.c to +/// indicate Index was detected instead of a Block Header. +#define LZMA_INDEX_DETECTED LZMA_RET_INTERNAL2 + + +typedef struct lzma_next_coder_s lzma_next_coder; + +typedef struct lzma_filter_info_s lzma_filter_info; + + +/// Type of a function used to initialize a filter encoder or decoder +typedef lzma_ret (*lzma_init_function)( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters); + +/// Type of a function to do some kind of coding work (filters, Stream, +/// Block encoders/decoders etc.). Some special coders use don't use both +/// input and output buffers, but for simplicity they still use this same +/// function prototype. +typedef lzma_ret (*lzma_code_function)( + void *coder, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, + lzma_action action); + +/// Type of a function to free the memory allocated for the coder +typedef void (*lzma_end_function)( + void *coder, const lzma_allocator *allocator); + + +/// Raw coder validates and converts an array of lzma_filter structures to +/// an array of lzma_filter_info structures. This array is used with +/// lzma_next_filter_init to initialize the filter chain. +struct lzma_filter_info_s { + /// Filter ID. This can be used to share the same initiazation + /// function *and* data structures with different Filter IDs + /// (LZMA_FILTER_LZMA1EXT does it), and also by the encoder + /// with lzma_filters_update() if filter chain is updated + /// in the middle of a raw stream or Block (LZMA_SYNC_FLUSH). + lzma_vli id; + + /// Pointer to function used to initialize the filter. + /// This is NULL to indicate end of array. + lzma_init_function init; + + /// Pointer to filter's options structure + void *options; +}; + + +/// Hold data and function pointers of the next filter in the chain. +struct lzma_next_coder_s { + /// Pointer to coder-specific data + void *coder; + + /// Filter ID. This is LZMA_VLI_UNKNOWN when this structure doesn't + /// point to a filter coder. + lzma_vli id; + + /// "Pointer" to init function. This is never called here. + /// We need only to detect if we are initializing a coder + /// that was allocated earlier. See lzma_next_coder_init and + /// lzma_next_strm_init macros in this file. + uintptr_t init; + + /// Pointer to function to do the actual coding + lzma_code_function code; + + /// Pointer to function to free lzma_next_coder.coder. This can + /// be NULL; in that case, lzma_free is called to free + /// lzma_next_coder.coder. + lzma_end_function end; + + /// Pointer to a function to get progress information. If this is NULL, + /// lzma_stream.total_in and .total_out are used instead. + void (*get_progress)(void *coder, + uint64_t *progress_in, uint64_t *progress_out); + + /// Pointer to function to return the type of the integrity check. + /// Most coders won't support this. + lzma_check (*get_check)(const void *coder); + + /// Pointer to function to get and/or change the memory usage limit. + /// If new_memlimit == 0, the limit is not changed. + lzma_ret (*memconfig)(void *coder, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit); + + /// Update the filter-specific options or the whole filter chain + /// in the encoder. + lzma_ret (*update)(void *coder, const lzma_allocator *allocator, + const lzma_filter *filters, + const lzma_filter *reversed_filters); + + /// Set how many bytes of output this coder may produce at maximum. + /// On success LZMA_OK must be returned. + /// If the filter chain as a whole cannot support this feature, + /// this must return LZMA_OPTIONS_ERROR. + /// If no input has been given to the coder and the requested limit + /// is too small, this must return LZMA_BUF_ERROR. If input has been + /// seen, LZMA_OK is allowed too. + lzma_ret (*set_out_limit)(void *coder, uint64_t *uncomp_size, + uint64_t out_limit); +}; + + +/// Macro to initialize lzma_next_coder structure +#define LZMA_NEXT_CODER_INIT \ + (lzma_next_coder){ \ + .coder = NULL, \ + .init = (uintptr_t)(NULL), \ + .id = LZMA_VLI_UNKNOWN, \ + .code = NULL, \ + .end = NULL, \ + .get_progress = NULL, \ + .get_check = NULL, \ + .memconfig = NULL, \ + .update = NULL, \ + .set_out_limit = NULL, \ + } + + +/// Internal data for lzma_strm_init, lzma_code, and lzma_end. A pointer to +/// this is stored in lzma_stream. +struct lzma_internal_s { + /// The actual coder that should do something useful + lzma_next_coder next; + + /// Track the state of the coder. This is used to validate arguments + /// so that the actual coders can rely on e.g. that LZMA_SYNC_FLUSH + /// is used on every call to lzma_code until next.code has returned + /// LZMA_STREAM_END. + enum { + ISEQ_RUN, + ISEQ_SYNC_FLUSH, + ISEQ_FULL_FLUSH, + ISEQ_FINISH, + ISEQ_FULL_BARRIER, + ISEQ_END, + ISEQ_ERROR, + } sequence; + + /// A copy of lzma_stream avail_in. This is used to verify that the + /// amount of input doesn't change once e.g. LZMA_FINISH has been + /// used. + size_t avail_in; + + /// Indicates which lzma_action values are allowed by next.code. + bool supported_actions[LZMA_ACTION_MAX + 1]; + + /// If true, lzma_code will return LZMA_BUF_ERROR if no progress was + /// made (no input consumed and no output produced by next.code). + bool allow_buf_error; +}; + + +/// Allocates memory +extern void *lzma_alloc(size_t size, const lzma_allocator *allocator) + lzma_attribute((__malloc__)) lzma_attr_alloc_size(1); + +/// Allocates memory and zeroes it (like calloc()). This can be faster +/// than lzma_alloc() + memzero() while being backward compatible with +/// custom allocators. +extern void * lzma_attribute((__malloc__)) lzma_attr_alloc_size(1) + lzma_alloc_zero(size_t size, const lzma_allocator *allocator); + +/// Frees memory +extern void lzma_free(void *ptr, const lzma_allocator *allocator); + + +/// Allocates strm->internal if it is NULL, and initializes *strm and +/// strm->internal. This function is only called via lzma_next_strm_init macro. +extern lzma_ret lzma_strm_init(lzma_stream *strm); + +/// Initializes the next filter in the chain, if any. This takes care of +/// freeing the memory of previously initialized filter if it is different +/// than the filter being initialized now. This way the actual filter +/// initialization functions don't need to use lzma_next_coder_init macro. +extern lzma_ret lzma_next_filter_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +/// Update the next filter in the chain, if any. This checks that +/// the application is not trying to change the Filter IDs. +extern lzma_ret lzma_next_filter_update( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *reversed_filters); + +/// Frees the memory allocated for next->coder either using next->end or, +/// if next->end is NULL, using lzma_free. +extern void lzma_next_end(lzma_next_coder *next, + const lzma_allocator *allocator); + + +/// Copy as much data as possible from in[] to out[] and update *in_pos +/// and *out_pos accordingly. Returns the number of bytes copied. +extern size_t lzma_bufcpy(const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size); + + +/// \brief Return if expression doesn't evaluate to LZMA_OK +/// +/// There are several situations where we want to return immediately +/// with the value of expr if it isn't LZMA_OK. This macro shortens +/// the code a little. +#define return_if_error(expr) \ +do { \ + const lzma_ret ret_ = (expr); \ + if (ret_ != LZMA_OK) \ + return ret_; \ +} while (0) + + +/// If next isn't already initialized, free the previous coder. Then mark +/// that next is _possibly_ initialized for the coder using this macro. +/// "Possibly" means that if e.g. allocation of next->coder fails, the +/// structure isn't actually initialized for this coder, but leaving +/// next->init to func is still OK. +#define lzma_next_coder_init(func, next, allocator) \ +do { \ + if ((uintptr_t)(func) != (next)->init) \ + lzma_next_end(next, allocator); \ + (next)->init = (uintptr_t)(func); \ +} while (0) + + +/// Initializes lzma_strm and calls func() to initialize strm->internal->next. +/// (The function being called will use lzma_next_coder_init()). If +/// initialization fails, memory that wasn't freed by func() is freed +/// along strm->internal. +#define lzma_next_strm_init(func, strm, ...) \ +do { \ + return_if_error(lzma_strm_init(strm)); \ + const lzma_ret ret_ = func(&(strm)->internal->next, \ + (strm)->allocator, __VA_ARGS__); \ + if (ret_ != LZMA_OK) { \ + lzma_end(strm); \ + return ret_; \ + } \ +} while (0) + +#endif diff --git a/src/liblzma/common/easy_buffer_encoder.c b/src/liblzma/common/easy_buffer_encoder.c new file mode 100644 index 0000000..48eb56f --- /dev/null +++ b/src/liblzma/common/easy_buffer_encoder.c @@ -0,0 +1,27 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file easy_buffer_encoder.c +/// \brief Easy single-call .xz Stream encoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "easy_preset.h" + + +extern LZMA_API(lzma_ret) +lzma_easy_buffer_encode(uint32_t preset, lzma_check check, + const lzma_allocator *allocator, const uint8_t *in, + size_t in_size, uint8_t *out, size_t *out_pos, size_t out_size) +{ + lzma_options_easy opt_easy; + if (lzma_easy_preset(&opt_easy, preset)) + return LZMA_OPTIONS_ERROR; + + return lzma_stream_buffer_encode(opt_easy.filters, check, + allocator, in, in_size, out, out_pos, out_size); +} diff --git a/src/liblzma/common/easy_decoder_memusage.c b/src/liblzma/common/easy_decoder_memusage.c new file mode 100644 index 0000000..20bcd5b --- /dev/null +++ b/src/liblzma/common/easy_decoder_memusage.c @@ -0,0 +1,24 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file easy_decoder_memusage.c +/// \brief Decoder memory usage calculation to match easy encoder presets +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "easy_preset.h" + + +extern LZMA_API(uint64_t) +lzma_easy_decoder_memusage(uint32_t preset) +{ + lzma_options_easy opt_easy; + if (lzma_easy_preset(&opt_easy, preset)) + return UINT32_MAX; + + return lzma_raw_decoder_memusage(opt_easy.filters); +} diff --git a/src/liblzma/common/easy_encoder.c b/src/liblzma/common/easy_encoder.c new file mode 100644 index 0000000..5cb492d --- /dev/null +++ b/src/liblzma/common/easy_encoder.c @@ -0,0 +1,24 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file easy_encoder.c +/// \brief Easy .xz Stream encoder initialization +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "easy_preset.h" + + +extern LZMA_API(lzma_ret) +lzma_easy_encoder(lzma_stream *strm, uint32_t preset, lzma_check check) +{ + lzma_options_easy opt_easy; + if (lzma_easy_preset(&opt_easy, preset)) + return LZMA_OPTIONS_ERROR; + + return lzma_stream_encoder(strm, opt_easy.filters, check); +} diff --git a/src/liblzma/common/easy_encoder_memusage.c b/src/liblzma/common/easy_encoder_memusage.c new file mode 100644 index 0000000..e910575 --- /dev/null +++ b/src/liblzma/common/easy_encoder_memusage.c @@ -0,0 +1,24 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file easy_encoder_memusage.c +/// \brief Easy .xz Stream encoder memory usage calculation +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "easy_preset.h" + + +extern LZMA_API(uint64_t) +lzma_easy_encoder_memusage(uint32_t preset) +{ + lzma_options_easy opt_easy; + if (lzma_easy_preset(&opt_easy, preset)) + return UINT32_MAX; + + return lzma_raw_encoder_memusage(opt_easy.filters); +} diff --git a/src/liblzma/common/easy_preset.c b/src/liblzma/common/easy_preset.c new file mode 100644 index 0000000..2f98598 --- /dev/null +++ b/src/liblzma/common/easy_preset.c @@ -0,0 +1,27 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file easy_preset.c +/// \brief Preset handling for easy encoder and decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "easy_preset.h" + + +extern bool +lzma_easy_preset(lzma_options_easy *opt_easy, uint32_t preset) +{ + if (lzma_lzma_preset(&opt_easy->opt_lzma, preset)) + return true; + + opt_easy->filters[0].id = LZMA_FILTER_LZMA2; + opt_easy->filters[0].options = &opt_easy->opt_lzma; + opt_easy->filters[1].id = LZMA_VLI_UNKNOWN; + + return false; +} diff --git a/src/liblzma/common/easy_preset.h b/src/liblzma/common/easy_preset.h new file mode 100644 index 0000000..382ade8 --- /dev/null +++ b/src/liblzma/common/easy_preset.h @@ -0,0 +1,32 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file easy_preset.h +/// \brief Preset handling for easy encoder and decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +typedef struct { + /// We need to keep the filters array available in case + /// LZMA_FULL_FLUSH is used. + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + + /// Options for LZMA2 + lzma_options_lzma opt_lzma; + + // Options for more filters can be added later, so this struct + // is not ready to be put into the public API. + +} lzma_options_easy; + + +/// Set *easy to the settings given by the preset. Returns true on error, +/// false on success. +extern bool lzma_easy_preset(lzma_options_easy *easy, uint32_t preset); diff --git a/src/liblzma/common/file_info.c b/src/liblzma/common/file_info.c new file mode 100644 index 0000000..a6b7e14 --- /dev/null +++ b/src/liblzma/common/file_info.c @@ -0,0 +1,855 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file file_info.c +/// \brief Decode .xz file information into a lzma_index structure +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "index_decoder.h" + + +typedef struct { + enum { + SEQ_MAGIC_BYTES, + SEQ_PADDING_SEEK, + SEQ_PADDING_DECODE, + SEQ_FOOTER, + SEQ_INDEX_INIT, + SEQ_INDEX_DECODE, + SEQ_HEADER_DECODE, + SEQ_HEADER_COMPARE, + } sequence; + + /// Absolute position of in[*in_pos] in the file. All code that + /// modifies *in_pos also updates this. seek_to_pos() needs this + /// to determine if we need to request the application to seek for + /// us or if we can do the seeking internally by adjusting *in_pos. + uint64_t file_cur_pos; + + /// This refers to absolute positions of interesting parts of the + /// input file. Sometimes it points to the *beginning* of a specific + /// field and sometimes to the *end* of a field. The current target + /// position at each moment is explained in the comments. + uint64_t file_target_pos; + + /// Size of the .xz file (from the application). + uint64_t file_size; + + /// Index decoder + lzma_next_coder index_decoder; + + /// Number of bytes remaining in the Index field that is currently + /// being decoded. + lzma_vli index_remaining; + + /// The Index decoder will store the decoded Index in this pointer. + lzma_index *this_index; + + /// Amount of Stream Padding in the current Stream. + lzma_vli stream_padding; + + /// The final combined index is collected here. + lzma_index *combined_index; + + /// Pointer from the application where to store the index information + /// after successful decoding. + lzma_index **dest_index; + + /// Pointer to lzma_stream.seek_pos to be used when returning + /// LZMA_SEEK_NEEDED. This is set by seek_to_pos() when needed. + uint64_t *external_seek_pos; + + /// Memory usage limit + uint64_t memlimit; + + /// Stream Flags from the very beginning of the file. + lzma_stream_flags first_header_flags; + + /// Stream Flags from Stream Header of the current Stream. + lzma_stream_flags header_flags; + + /// Stream Flags from Stream Footer of the current Stream. + lzma_stream_flags footer_flags; + + size_t temp_pos; + size_t temp_size; + uint8_t temp[8192]; + +} lzma_file_info_coder; + + +/// Copies data from in[*in_pos] into coder->temp until +/// coder->temp_pos == coder->temp_size. This also keeps coder->file_cur_pos +/// in sync with *in_pos. Returns true if more input is needed. +static bool +fill_temp(lzma_file_info_coder *coder, const uint8_t *restrict in, + size_t *restrict in_pos, size_t in_size) +{ + coder->file_cur_pos += lzma_bufcpy(in, in_pos, in_size, + coder->temp, &coder->temp_pos, coder->temp_size); + return coder->temp_pos < coder->temp_size; +} + + +/// Seeks to the absolute file position specified by target_pos. +/// This tries to do the seeking by only modifying *in_pos, if possible. +/// The main benefit of this is that if one passes the whole file at once +/// to lzma_code(), the decoder will never need to return LZMA_SEEK_NEEDED +/// as all the seeking can be done by adjusting *in_pos in this function. +/// +/// Returns true if an external seek is needed and the caller must return +/// LZMA_SEEK_NEEDED. +static bool +seek_to_pos(lzma_file_info_coder *coder, uint64_t target_pos, + size_t in_start, size_t *in_pos, size_t in_size) +{ + // The input buffer doesn't extend beyond the end of the file. + // This has been checked by file_info_decode() already. + assert(coder->file_size - coder->file_cur_pos >= in_size - *in_pos); + + const uint64_t pos_min = coder->file_cur_pos - (*in_pos - in_start); + const uint64_t pos_max = coder->file_cur_pos + (in_size - *in_pos); + + bool external_seek_needed; + + if (target_pos >= pos_min && target_pos <= pos_max) { + // The requested position is available in the current input + // buffer or right after it. That is, in a corner case we + // end up setting *in_pos == in_size and thus will immediately + // need new input bytes from the application. + *in_pos += (size_t)(target_pos - coder->file_cur_pos); + external_seek_needed = false; + } else { + // Ask the application to seek the input file. + *coder->external_seek_pos = target_pos; + external_seek_needed = true; + + // Mark the whole input buffer as used. This way + // lzma_stream.total_in will have a better estimate + // of the amount of data read. It still won't be perfect + // as the value will depend on the input buffer size that + // the application uses, but it should be good enough for + // those few who want an estimate. + *in_pos = in_size; + } + + // After seeking (internal or external) the current position + // will match the requested target position. + coder->file_cur_pos = target_pos; + + return external_seek_needed; +} + + +/// The caller sets coder->file_target_pos so that it points to the *end* +/// of the desired file position. This function then determines how far +/// backwards from that position we can seek. After seeking fill_temp() +/// can be used to read data into coder->temp. When fill_temp() has finished, +/// coder->temp[coder->temp_size] will match coder->file_target_pos. +/// +/// This also validates that coder->target_file_pos is sane in sense that +/// we aren't trying to seek too far backwards (too close or beyond the +/// beginning of the file). +static lzma_ret +reverse_seek(lzma_file_info_coder *coder, + size_t in_start, size_t *in_pos, size_t in_size) +{ + // Check that there is enough data before the target position + // to contain at least Stream Header and Stream Footer. If there + // isn't, the file cannot be valid. + if (coder->file_target_pos < 2 * LZMA_STREAM_HEADER_SIZE) + return LZMA_DATA_ERROR; + + coder->temp_pos = 0; + + // The Stream Header at the very beginning of the file gets handled + // specially in SEQ_MAGIC_BYTES and thus we will never need to seek + // there. By not seeking to the first LZMA_STREAM_HEADER_SIZE bytes + // we avoid a useless external seek after SEQ_MAGIC_BYTES if the + // application uses an extremely small input buffer and the input + // file is very small. + if (coder->file_target_pos - LZMA_STREAM_HEADER_SIZE + < sizeof(coder->temp)) + coder->temp_size = (size_t)(coder->file_target_pos + - LZMA_STREAM_HEADER_SIZE); + else + coder->temp_size = sizeof(coder->temp); + + // The above if-statements guarantee this. This is important because + // the Stream Header/Footer decoders assume that there's at least + // LZMA_STREAM_HEADER_SIZE bytes in coder->temp. + assert(coder->temp_size >= LZMA_STREAM_HEADER_SIZE); + + if (seek_to_pos(coder, coder->file_target_pos - coder->temp_size, + in_start, in_pos, in_size)) + return LZMA_SEEK_NEEDED; + + return LZMA_OK; +} + + +/// Gets the number of zero-bytes at the end of the buffer. +static size_t +get_padding_size(const uint8_t *buf, size_t buf_size) +{ + size_t padding = 0; + while (buf_size > 0 && buf[--buf_size] == 0x00) + ++padding; + + return padding; +} + + +/// With the Stream Header at the very beginning of the file, LZMA_FORMAT_ERROR +/// is used to tell the application that Magic Bytes didn't match. In other +/// Stream Header/Footer fields (in the middle/end of the file) it could be +/// a bit confusing to return LZMA_FORMAT_ERROR as we already know that there +/// is a valid Stream Header at the beginning of the file. For those cases +/// this function is used to convert LZMA_FORMAT_ERROR to LZMA_DATA_ERROR. +static lzma_ret +hide_format_error(lzma_ret ret) +{ + if (ret == LZMA_FORMAT_ERROR) + ret = LZMA_DATA_ERROR; + + return ret; +} + + +/// Calls the Index decoder and updates coder->index_remaining. +/// This is a separate function because the input can be either directly +/// from the application or from coder->temp. +static lzma_ret +decode_index(lzma_file_info_coder *coder, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, bool update_file_cur_pos) +{ + const size_t in_start = *in_pos; + + const lzma_ret ret = coder->index_decoder.code( + coder->index_decoder.coder, + allocator, in, in_pos, in_size, + NULL, NULL, 0, LZMA_RUN); + + coder->index_remaining -= *in_pos - in_start; + + if (update_file_cur_pos) + coder->file_cur_pos += *in_pos - in_start; + + return ret; +} + + +static lzma_ret +file_info_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, + uint8_t *restrict out lzma_attribute((__unused__)), + size_t *restrict out_pos lzma_attribute((__unused__)), + size_t out_size lzma_attribute((__unused__)), + lzma_action action lzma_attribute((__unused__))) +{ + lzma_file_info_coder *coder = coder_ptr; + const size_t in_start = *in_pos; + + // If the caller provides input past the end of the file, trim + // the extra bytes from the buffer so that we won't read too far. + assert(coder->file_size >= coder->file_cur_pos); + if (coder->file_size - coder->file_cur_pos < in_size - in_start) + in_size = in_start + + (size_t)(coder->file_size - coder->file_cur_pos); + + while (true) + switch (coder->sequence) { + case SEQ_MAGIC_BYTES: + // Decode the Stream Header at the beginning of the file + // first to check if the Magic Bytes match. The flags + // are stored in coder->first_header_flags so that we + // don't need to seek to it again. + // + // Check that the file is big enough to contain at least + // Stream Header. + if (coder->file_size < LZMA_STREAM_HEADER_SIZE) + return LZMA_FORMAT_ERROR; + + // Read the Stream Header field into coder->temp. + if (fill_temp(coder, in, in_pos, in_size)) + return LZMA_OK; + + // This is the only Stream Header/Footer decoding where we + // want to return LZMA_FORMAT_ERROR if the Magic Bytes don't + // match. Elsewhere it will be converted to LZMA_DATA_ERROR. + return_if_error(lzma_stream_header_decode( + &coder->first_header_flags, coder->temp)); + + // Now that we know that the Magic Bytes match, check the + // file size. It's better to do this here after checking the + // Magic Bytes since this way we can give LZMA_FORMAT_ERROR + // instead of LZMA_DATA_ERROR when the Magic Bytes don't + // match in a file that is too big or isn't a multiple of + // four bytes. + if (coder->file_size > LZMA_VLI_MAX || (coder->file_size & 3)) + return LZMA_DATA_ERROR; + + // Start looking for Stream Padding and Stream Footer + // at the end of the file. + coder->file_target_pos = coder->file_size; + + // Fall through + + case SEQ_PADDING_SEEK: + coder->sequence = SEQ_PADDING_DECODE; + return_if_error(reverse_seek( + coder, in_start, in_pos, in_size)); + + // Fall through + + case SEQ_PADDING_DECODE: { + // Copy to coder->temp first. This keeps the code simpler if + // the application only provides input a few bytes at a time. + if (fill_temp(coder, in, in_pos, in_size)) + return LZMA_OK; + + // Scan the buffer backwards to get the size of the + // Stream Padding field (if any). + const size_t new_padding = get_padding_size( + coder->temp, coder->temp_size); + coder->stream_padding += new_padding; + + // Set the target position to the beginning of Stream Padding + // that has been observed so far. If all Stream Padding has + // been seen, then the target position will be at the end + // of the Stream Footer field. + coder->file_target_pos -= new_padding; + + if (new_padding == coder->temp_size) { + // The whole buffer was padding. Seek backwards in + // the file to get more input. + coder->sequence = SEQ_PADDING_SEEK; + break; + } + + // Size of Stream Padding must be a multiple of 4 bytes. + if (coder->stream_padding & 3) + return LZMA_DATA_ERROR; + + coder->sequence = SEQ_FOOTER; + + // Calculate the amount of non-padding data in coder->temp. + coder->temp_size -= new_padding; + coder->temp_pos = coder->temp_size; + + // We can avoid an external seek if the whole Stream Footer + // is already in coder->temp. In that case SEQ_FOOTER won't + // read more input and will find the Stream Footer from + // coder->temp[coder->temp_size - LZMA_STREAM_HEADER_SIZE]. + // + // Otherwise we will need to seek. The seeking is done so + // that Stream Footer wil be at the end of coder->temp. + // This way it's likely that we also get a complete Index + // field into coder->temp without needing a separate seek + // for that (unless the Index field is big). + if (coder->temp_size < LZMA_STREAM_HEADER_SIZE) + return_if_error(reverse_seek( + coder, in_start, in_pos, in_size)); + } + + // Fall through + + case SEQ_FOOTER: + // Copy the Stream Footer field into coder->temp. + // If Stream Footer was already available in coder->temp + // in SEQ_PADDING_DECODE, then this does nothing. + if (fill_temp(coder, in, in_pos, in_size)) + return LZMA_OK; + + // Make coder->file_target_pos and coder->temp_size point + // to the beginning of Stream Footer and thus to the end + // of the Index field. coder->temp_pos will be updated + // a bit later. + coder->file_target_pos -= LZMA_STREAM_HEADER_SIZE; + coder->temp_size -= LZMA_STREAM_HEADER_SIZE; + + // Decode Stream Footer. + return_if_error(hide_format_error(lzma_stream_footer_decode( + &coder->footer_flags, + coder->temp + coder->temp_size))); + + // Check that we won't seek past the beginning of the file. + // + // LZMA_STREAM_HEADER_SIZE is added because there must be + // space for Stream Header too even though we won't seek + // there before decoding the Index field. + // + // There's no risk of integer overflow here because + // Backward Size cannot be greater than 2^34. + if (coder->file_target_pos < coder->footer_flags.backward_size + + LZMA_STREAM_HEADER_SIZE) + return LZMA_DATA_ERROR; + + // Set the target position to the beginning of the Index field. + coder->file_target_pos -= coder->footer_flags.backward_size; + coder->sequence = SEQ_INDEX_INIT; + + // We can avoid an external seek if the whole Index field is + // already available in coder->temp. + if (coder->temp_size >= coder->footer_flags.backward_size) { + // Set coder->temp_pos to point to the beginning + // of the Index. + coder->temp_pos = coder->temp_size + - coder->footer_flags.backward_size; + } else { + // These are set to zero to indicate that there's no + // useful data (Index or anything else) in coder->temp. + coder->temp_pos = 0; + coder->temp_size = 0; + + // Seek to the beginning of the Index field. + if (seek_to_pos(coder, coder->file_target_pos, + in_start, in_pos, in_size)) + return LZMA_SEEK_NEEDED; + } + + // Fall through + + case SEQ_INDEX_INIT: { + // Calculate the amount of memory already used by the earlier + // Indexes so that we know how big memory limit to pass to + // the Index decoder. + // + // NOTE: When there are multiple Streams, the separate + // lzma_index structures can use more RAM (as measured by + // lzma_index_memused()) than the final combined lzma_index. + // Thus memlimit may need to be slightly higher than the final + // calculated memory usage will be. This is perhaps a bit + // confusing to the application, but I think it shouldn't + // cause problems in practice. + uint64_t memused = 0; + if (coder->combined_index != NULL) { + memused = lzma_index_memused(coder->combined_index); + assert(memused <= coder->memlimit); + if (memused > coder->memlimit) // Extra sanity check + return LZMA_PROG_ERROR; + } + + // Initialize the Index decoder. + return_if_error(lzma_index_decoder_init( + &coder->index_decoder, allocator, + &coder->this_index, + coder->memlimit - memused)); + + coder->index_remaining = coder->footer_flags.backward_size; + coder->sequence = SEQ_INDEX_DECODE; + } + + // Fall through + + case SEQ_INDEX_DECODE: { + // Decode (a part of) the Index. If the whole Index is already + // in coder->temp, read it from there. Otherwise read from + // in[*in_pos] onwards. Note that index_decode() updates + // coder->index_remaining and optionally coder->file_cur_pos. + lzma_ret ret; + if (coder->temp_size != 0) { + assert(coder->temp_size - coder->temp_pos + == coder->index_remaining); + ret = decode_index(coder, allocator, coder->temp, + &coder->temp_pos, coder->temp_size, + false); + } else { + // Don't give the decoder more input than the known + // remaining size of the Index field. + size_t in_stop = in_size; + if (in_size - *in_pos > coder->index_remaining) + in_stop = *in_pos + + (size_t)(coder->index_remaining); + + ret = decode_index(coder, allocator, + in, in_pos, in_stop, true); + } + + switch (ret) { + case LZMA_OK: + // If the Index docoder asks for more input when we + // have already given it as much input as Backward Size + // indicated, the file is invalid. + if (coder->index_remaining == 0) + return LZMA_DATA_ERROR; + + // We cannot get here if we were reading Index from + // coder->temp because when reading from coder->temp + // we give the Index decoder exactly + // coder->index_remaining bytes of input. + assert(coder->temp_size == 0); + + return LZMA_OK; + + case LZMA_STREAM_END: + // If the decoding seems to be successful, check also + // that the Index decoder consumed as much input as + // indicated by the Backward Size field. + if (coder->index_remaining != 0) + return LZMA_DATA_ERROR; + + break; + + default: + return ret; + } + + // Calculate how much the Index tells us to seek backwards + // (relative to the beginning of the Index): Total size of + // all Blocks plus the size of the Stream Header field. + // No integer overflow here because lzma_index_total_size() + // cannot return a value greater than LZMA_VLI_MAX. + const uint64_t seek_amount + = lzma_index_total_size(coder->this_index) + + LZMA_STREAM_HEADER_SIZE; + + // Check that Index is sane in sense that seek_amount won't + // make us seek past the beginning of the file when locating + // the Stream Header. + // + // coder->file_target_pos still points to the beginning of + // the Index field. + if (coder->file_target_pos < seek_amount) + return LZMA_DATA_ERROR; + + // Set the target to the beginning of Stream Header. + coder->file_target_pos -= seek_amount; + + if (coder->file_target_pos == 0) { + // We would seek to the beginning of the file, but + // since we already decoded that Stream Header in + // SEQ_MAGIC_BYTES, we can use the cached value from + // coder->first_header_flags to avoid the seek. + coder->header_flags = coder->first_header_flags; + coder->sequence = SEQ_HEADER_COMPARE; + break; + } + + coder->sequence = SEQ_HEADER_DECODE; + + // Make coder->file_target_pos point to the end of + // the Stream Header field. + coder->file_target_pos += LZMA_STREAM_HEADER_SIZE; + + // If coder->temp_size is non-zero, it points to the end + // of the Index field. Then the beginning of the Index + // field is at coder->temp[coder->temp_size + // - coder->footer_flags.backward_size]. + assert(coder->temp_size == 0 || coder->temp_size + >= coder->footer_flags.backward_size); + + // If coder->temp contained the whole Index, see if it has + // enough data to contain also the Stream Header. If so, + // we avoid an external seek. + // + // NOTE: This can happen only with small .xz files and only + // for the non-first Stream as the Stream Flags of the first + // Stream are cached and already handled a few lines above. + // So this isn't as useful as the other seek-avoidance cases. + if (coder->temp_size != 0 && coder->temp_size + - coder->footer_flags.backward_size + >= seek_amount) { + // Make temp_pos and temp_size point to the *end* of + // Stream Header so that SEQ_HEADER_DECODE will find + // the start of Stream Header from coder->temp[ + // coder->temp_size - LZMA_STREAM_HEADER_SIZE]. + coder->temp_pos = coder->temp_size + - coder->footer_flags.backward_size + - seek_amount + + LZMA_STREAM_HEADER_SIZE; + coder->temp_size = coder->temp_pos; + } else { + // Seek so that Stream Header will be at the end of + // coder->temp. With typical multi-Stream files we + // will usually also get the Stream Footer and Index + // of the *previous* Stream in coder->temp and thus + // won't need a separate seek for them. + return_if_error(reverse_seek(coder, + in_start, in_pos, in_size)); + } + } + + // Fall through + + case SEQ_HEADER_DECODE: + // Copy the Stream Header field into coder->temp. + // If Stream Header was already available in coder->temp + // in SEQ_INDEX_DECODE, then this does nothing. + if (fill_temp(coder, in, in_pos, in_size)) + return LZMA_OK; + + // Make all these point to the beginning of Stream Header. + coder->file_target_pos -= LZMA_STREAM_HEADER_SIZE; + coder->temp_size -= LZMA_STREAM_HEADER_SIZE; + coder->temp_pos = coder->temp_size; + + // Decode the Stream Header. + return_if_error(hide_format_error(lzma_stream_header_decode( + &coder->header_flags, + coder->temp + coder->temp_size))); + + coder->sequence = SEQ_HEADER_COMPARE; + + // Fall through + + case SEQ_HEADER_COMPARE: + // Compare Stream Header against Stream Footer. They must + // match. + return_if_error(lzma_stream_flags_compare( + &coder->header_flags, &coder->footer_flags)); + + // Store the decoded Stream Flags into the Index. Use the + // Footer Flags because it contains Backward Size, although + // it shouldn't matter in practice. + if (lzma_index_stream_flags(coder->this_index, + &coder->footer_flags) != LZMA_OK) + return LZMA_PROG_ERROR; + + // Store also the size of the Stream Padding field. It is + // needed to calculate the offsets of the Streams correctly. + if (lzma_index_stream_padding(coder->this_index, + coder->stream_padding) != LZMA_OK) + return LZMA_PROG_ERROR; + + // Reset it so that it's ready for the next Stream. + coder->stream_padding = 0; + + // Append the earlier decoded Indexes after this_index. + if (coder->combined_index != NULL) + return_if_error(lzma_index_cat(coder->this_index, + coder->combined_index, allocator)); + + coder->combined_index = coder->this_index; + coder->this_index = NULL; + + // If the whole file was decoded, tell the caller that we + // are finished. + if (coder->file_target_pos == 0) { + // The combined index must indicate the same file + // size as was told to us at initialization. + assert(lzma_index_file_size(coder->combined_index) + == coder->file_size); + + // Make the combined index available to + // the application. + *coder->dest_index = coder->combined_index; + coder->combined_index = NULL; + + // Mark the input buffer as used since we may have + // done internal seeking and thus don't know how + // many input bytes were actually used. This way + // lzma_stream.total_in gets a slightly better + // estimate of the amount of input used. + *in_pos = in_size; + return LZMA_STREAM_END; + } + + // We didn't hit the beginning of the file yet, so continue + // reading backwards in the file. If we have unprocessed + // data in coder->temp, use it before requesting more data + // from the application. + // + // coder->file_target_pos, coder->temp_size, and + // coder->temp_pos all point to the beginning of Stream Header + // and thus the end of the previous Stream in the file. + coder->sequence = coder->temp_size > 0 + ? SEQ_PADDING_DECODE : SEQ_PADDING_SEEK; + break; + + default: + assert(0); + return LZMA_PROG_ERROR; + } +} + + +static lzma_ret +file_info_decoder_memconfig(void *coder_ptr, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit) +{ + lzma_file_info_coder *coder = coder_ptr; + + // The memory usage calculation comes from three things: + // + // (1) The Indexes that have already been decoded and processed into + // coder->combined_index. + // + // (2) The latest Index in coder->this_index that has been decoded but + // not yet put into coder->combined_index. + // + // (3) The latest Index that we have started decoding but haven't + // finished and thus isn't available in coder->this_index yet. + // Memory usage and limit information needs to be communicated + // from/to coder->index_decoder. + // + // Care has to be taken to not do both (2) and (3) when calculating + // the memory usage. + uint64_t combined_index_memusage = 0; + uint64_t this_index_memusage = 0; + + // (1) If we have already successfully decoded one or more Indexes, + // get their memory usage. + if (coder->combined_index != NULL) + combined_index_memusage = lzma_index_memused( + coder->combined_index); + + // Choose between (2), (3), or neither. + if (coder->this_index != NULL) { + // (2) The latest Index is available. Use its memory usage. + this_index_memusage = lzma_index_memused(coder->this_index); + + } else if (coder->sequence == SEQ_INDEX_DECODE) { + // (3) The Index decoder is activate and hasn't yet stored + // the new index in coder->this_index. Get the memory usage + // information from the Index decoder. + // + // NOTE: If the Index decoder doesn't yet know how much memory + // it will eventually need, it will return a tiny value here. + uint64_t dummy; + if (coder->index_decoder.memconfig(coder->index_decoder.coder, + &this_index_memusage, &dummy, 0) + != LZMA_OK) { + assert(0); + return LZMA_PROG_ERROR; + } + } + + // Now we know the total memory usage/requirement. If we had neither + // old Indexes nor a new Index, this will be zero which isn't + // acceptable as lzma_memusage() has to return non-zero on success + // and even with an empty .xz file we will end up with a lzma_index + // that takes some memory. + *memusage = combined_index_memusage + this_index_memusage; + if (*memusage == 0) + *memusage = lzma_index_memusage(1, 0); + + *old_memlimit = coder->memlimit; + + // If requested, set a new memory usage limit. + if (new_memlimit != 0) { + if (new_memlimit < *memusage) + return LZMA_MEMLIMIT_ERROR; + + // In the condition (3) we need to tell the Index decoder + // its new memory usage limit. + if (coder->this_index == NULL + && coder->sequence == SEQ_INDEX_DECODE) { + const uint64_t idec_new_memlimit = new_memlimit + - combined_index_memusage; + + assert(this_index_memusage > 0); + assert(idec_new_memlimit > 0); + + uint64_t dummy1; + uint64_t dummy2; + + if (coder->index_decoder.memconfig( + coder->index_decoder.coder, + &dummy1, &dummy2, idec_new_memlimit) + != LZMA_OK) { + assert(0); + return LZMA_PROG_ERROR; + } + } + + coder->memlimit = new_memlimit; + } + + return LZMA_OK; +} + + +static void +file_info_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_file_info_coder *coder = coder_ptr; + + lzma_next_end(&coder->index_decoder, allocator); + lzma_index_end(coder->this_index, allocator); + lzma_index_end(coder->combined_index, allocator); + + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +lzma_file_info_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, uint64_t *seek_pos, + lzma_index **dest_index, + uint64_t memlimit, uint64_t file_size) +{ + lzma_next_coder_init(&lzma_file_info_decoder_init, next, allocator); + + if (dest_index == NULL) + return LZMA_PROG_ERROR; + + lzma_file_info_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_file_info_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &file_info_decode; + next->end = &file_info_decoder_end; + next->memconfig = &file_info_decoder_memconfig; + + coder->index_decoder = LZMA_NEXT_CODER_INIT; + coder->this_index = NULL; + coder->combined_index = NULL; + } + + coder->sequence = SEQ_MAGIC_BYTES; + coder->file_cur_pos = 0; + coder->file_target_pos = 0; + coder->file_size = file_size; + + lzma_index_end(coder->this_index, allocator); + coder->this_index = NULL; + + lzma_index_end(coder->combined_index, allocator); + coder->combined_index = NULL; + + coder->stream_padding = 0; + + coder->dest_index = dest_index; + coder->external_seek_pos = seek_pos; + + // If memlimit is 0, make it 1 to ensure that lzma_memlimit_get() + // won't return 0 (which would indicate an error). + coder->memlimit = my_max(1, memlimit); + + // Prepare these for reading the first Stream Header into coder->temp. + coder->temp_pos = 0; + coder->temp_size = LZMA_STREAM_HEADER_SIZE; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_file_info_decoder(lzma_stream *strm, lzma_index **dest_index, + uint64_t memlimit, uint64_t file_size) +{ + lzma_next_strm_init(lzma_file_info_decoder_init, strm, &strm->seek_pos, + dest_index, memlimit, file_size); + + // We allow LZMA_FINISH in addition to LZMA_RUN for convenience. + // lzma_code() is able to handle the LZMA_FINISH + LZMA_SEEK_NEEDED + // combination in a sane way. Applications still need to be careful + // if they use LZMA_FINISH so that they remember to reset it back + // to LZMA_RUN after seeking if needed. + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/filter_buffer_decoder.c b/src/liblzma/common/filter_buffer_decoder.c new file mode 100644 index 0000000..6620986 --- /dev/null +++ b/src/liblzma/common/filter_buffer_decoder.c @@ -0,0 +1,88 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_buffer_decoder.c +/// \brief Single-call raw decoding +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_decoder.h" + + +extern LZMA_API(lzma_ret) +lzma_raw_buffer_decode( + const lzma_filter *filters, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // Validate what isn't validated later in filter_common.c. + if (in == NULL || in_pos == NULL || *in_pos > in_size || out == NULL + || out_pos == NULL || *out_pos > out_size) + return LZMA_PROG_ERROR; + + // Initialize the decoer. + lzma_next_coder next = LZMA_NEXT_CODER_INIT; + return_if_error(lzma_raw_decoder_init(&next, allocator, filters)); + + // Store the positions so that we can restore them if something + // goes wrong. + const size_t in_start = *in_pos; + const size_t out_start = *out_pos; + + // Do the actual decoding and free decoder's memory. + lzma_ret ret = next.code(next.coder, allocator, in, in_pos, in_size, + out, out_pos, out_size, LZMA_FINISH); + + if (ret == LZMA_STREAM_END) { + ret = LZMA_OK; + } else { + if (ret == LZMA_OK) { + // Either the input was truncated or the + // output buffer was too small. + assert(*in_pos == in_size || *out_pos == out_size); + + if (*in_pos != in_size) { + // Since input wasn't consumed completely, + // the output buffer became full and is + // too small. + ret = LZMA_BUF_ERROR; + + } else if (*out_pos != out_size) { + // Since output didn't became full, the input + // has to be truncated. + ret = LZMA_DATA_ERROR; + + } else { + // All the input was consumed and output + // buffer is full. Now we don't immediately + // know the reason for the error. Try + // decoding one more byte. If it succeeds, + // then the output buffer was too small. If + // we cannot get a new output byte, the input + // is truncated. + uint8_t tmp[1]; + size_t tmp_pos = 0; + (void)next.code(next.coder, allocator, + in, in_pos, in_size, + tmp, &tmp_pos, 1, LZMA_FINISH); + + if (tmp_pos == 1) + ret = LZMA_BUF_ERROR; + else + ret = LZMA_DATA_ERROR; + } + } + + // Restore the positions. + *in_pos = in_start; + *out_pos = out_start; + } + + lzma_next_end(&next, allocator); + + return ret; +} diff --git a/src/liblzma/common/filter_buffer_encoder.c b/src/liblzma/common/filter_buffer_encoder.c new file mode 100644 index 0000000..dda18e3 --- /dev/null +++ b/src/liblzma/common/filter_buffer_encoder.c @@ -0,0 +1,55 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_buffer_encoder.c +/// \brief Single-call raw encoding +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_encoder.h" + + +extern LZMA_API(lzma_ret) +lzma_raw_buffer_encode( + const lzma_filter *filters, const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // Validate what isn't validated later in filter_common.c. + if ((in == NULL && in_size != 0) || out == NULL + || out_pos == NULL || *out_pos > out_size) + return LZMA_PROG_ERROR; + + // Initialize the encoder + lzma_next_coder next = LZMA_NEXT_CODER_INIT; + return_if_error(lzma_raw_encoder_init(&next, allocator, filters)); + + // Store the output position so that we can restore it if + // something goes wrong. + const size_t out_start = *out_pos; + + // Do the actual encoding and free coder's memory. + size_t in_pos = 0; + lzma_ret ret = next.code(next.coder, allocator, in, &in_pos, in_size, + out, out_pos, out_size, LZMA_FINISH); + lzma_next_end(&next, allocator); + + if (ret == LZMA_STREAM_END) { + ret = LZMA_OK; + } else { + if (ret == LZMA_OK) { + // Output buffer was too small. + assert(*out_pos == out_size); + ret = LZMA_BUF_ERROR; + } + + // Restore the output position. + *out_pos = out_start; + } + + return ret; +} diff --git a/src/liblzma/common/filter_common.c b/src/liblzma/common/filter_common.c new file mode 100644 index 0000000..fa0927c --- /dev/null +++ b/src/liblzma/common/filter_common.c @@ -0,0 +1,385 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_common.c +/// \brief Filter-specific stuff common for both encoder and decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_common.h" + + +static const struct { + /// Filter ID + lzma_vli id; + + /// Size of the filter-specific options structure + size_t options_size; + + /// True if it is OK to use this filter as non-last filter in + /// the chain. + bool non_last_ok; + + /// True if it is OK to use this filter as the last filter in + /// the chain. + bool last_ok; + + /// True if the filter may change the size of the data (that is, the + /// amount of encoded output can be different than the amount of + /// uncompressed input). + bool changes_size; + +} features[] = { +#if defined (HAVE_ENCODER_LZMA1) || defined(HAVE_DECODER_LZMA1) + { + .id = LZMA_FILTER_LZMA1, + .options_size = sizeof(lzma_options_lzma), + .non_last_ok = false, + .last_ok = true, + .changes_size = true, + }, + { + .id = LZMA_FILTER_LZMA1EXT, + .options_size = sizeof(lzma_options_lzma), + .non_last_ok = false, + .last_ok = true, + .changes_size = true, + }, +#endif +#if defined(HAVE_ENCODER_LZMA2) || defined(HAVE_DECODER_LZMA2) + { + .id = LZMA_FILTER_LZMA2, + .options_size = sizeof(lzma_options_lzma), + .non_last_ok = false, + .last_ok = true, + .changes_size = true, + }, +#endif +#if defined(HAVE_ENCODER_X86) || defined(HAVE_DECODER_X86) + { + .id = LZMA_FILTER_X86, + .options_size = sizeof(lzma_options_bcj), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif +#if defined(HAVE_ENCODER_POWERPC) || defined(HAVE_DECODER_POWERPC) + { + .id = LZMA_FILTER_POWERPC, + .options_size = sizeof(lzma_options_bcj), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif +#if defined(HAVE_ENCODER_IA64) || defined(HAVE_DECODER_IA64) + { + .id = LZMA_FILTER_IA64, + .options_size = sizeof(lzma_options_bcj), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif +#if defined(HAVE_ENCODER_ARM) || defined(HAVE_DECODER_ARM) + { + .id = LZMA_FILTER_ARM, + .options_size = sizeof(lzma_options_bcj), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif +#if defined(HAVE_ENCODER_ARMTHUMB) || defined(HAVE_DECODER_ARMTHUMB) + { + .id = LZMA_FILTER_ARMTHUMB, + .options_size = sizeof(lzma_options_bcj), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif +#if defined(HAVE_ENCODER_ARM64) || defined(HAVE_DECODER_ARM64) + { + .id = LZMA_FILTER_ARM64, + .options_size = sizeof(lzma_options_bcj), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif +#if defined(HAVE_ENCODER_SPARC) || defined(HAVE_DECODER_SPARC) + { + .id = LZMA_FILTER_SPARC, + .options_size = sizeof(lzma_options_bcj), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif +#if defined(HAVE_ENCODER_DELTA) || defined(HAVE_DECODER_DELTA) + { + .id = LZMA_FILTER_DELTA, + .options_size = sizeof(lzma_options_delta), + .non_last_ok = true, + .last_ok = false, + .changes_size = false, + }, +#endif + { + .id = LZMA_VLI_UNKNOWN + } +}; + + +extern LZMA_API(lzma_ret) +lzma_filters_copy(const lzma_filter *src, lzma_filter *real_dest, + const lzma_allocator *allocator) +{ + if (src == NULL || real_dest == NULL) + return LZMA_PROG_ERROR; + + // Use a temporary destination so that the real destination + // will never be modied if an error occurs. + lzma_filter dest[LZMA_FILTERS_MAX + 1]; + + lzma_ret ret; + size_t i; + for (i = 0; src[i].id != LZMA_VLI_UNKNOWN; ++i) { + // There must be a maximum of four filters plus + // the array terminator. + if (i == LZMA_FILTERS_MAX) { + ret = LZMA_OPTIONS_ERROR; + goto error; + } + + dest[i].id = src[i].id; + + if (src[i].options == NULL) { + dest[i].options = NULL; + } else { + // See if the filter is supported only when the + // options is not NULL. This might be convenient + // sometimes if the app is actually copying only + // a partial filter chain with a place holder ID. + // + // When options is not NULL, the Filter ID must be + // supported by us, because otherwise we don't know + // how big the options are. + size_t j; + for (j = 0; src[i].id != features[j].id; ++j) { + if (features[j].id == LZMA_VLI_UNKNOWN) { + ret = LZMA_OPTIONS_ERROR; + goto error; + } + } + + // Allocate and copy the options. + dest[i].options = lzma_alloc(features[j].options_size, + allocator); + if (dest[i].options == NULL) { + ret = LZMA_MEM_ERROR; + goto error; + } + + memcpy(dest[i].options, src[i].options, + features[j].options_size); + } + } + + // Terminate the filter array. + assert(i < LZMA_FILTERS_MAX + 1); + dest[i].id = LZMA_VLI_UNKNOWN; + dest[i].options = NULL; + + // Copy it to the caller-supplied array now that we know that + // no errors occurred. + memcpy(real_dest, dest, (i + 1) * sizeof(lzma_filter)); + + return LZMA_OK; + +error: + // Free the options which we have already allocated. + while (i-- > 0) + lzma_free(dest[i].options, allocator); + + return ret; +} + + +extern LZMA_API(void) +lzma_filters_free(lzma_filter *filters, const lzma_allocator *allocator) +{ + if (filters == NULL) + return; + + for (size_t i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i) { + if (i == LZMA_FILTERS_MAX) { + // The API says that LZMA_FILTERS_MAX + 1 is the + // maximum allowed size including the terminating + // element. Thus, we should never get here but in + // case there is a bug and we do anyway, don't go + // past the (probable) end of the array. + assert(0); + break; + } + + lzma_free(filters[i].options, allocator); + filters[i].options = NULL; + filters[i].id = LZMA_VLI_UNKNOWN; + } + + return; +} + + +extern lzma_ret +lzma_validate_chain(const lzma_filter *filters, size_t *count) +{ + // There must be at least one filter. + if (filters == NULL || filters[0].id == LZMA_VLI_UNKNOWN) + return LZMA_PROG_ERROR; + + // Number of non-last filters that may change the size of the data + // significantly (that is, more than 1-2 % or so). + size_t changes_size_count = 0; + + // True if it is OK to add a new filter after the current filter. + bool non_last_ok = true; + + // True if the last filter in the given chain is actually usable as + // the last filter. Only filters that support embedding End of Payload + // Marker can be used as the last filter in the chain. + bool last_ok = false; + + size_t i = 0; + do { + size_t j; + for (j = 0; filters[i].id != features[j].id; ++j) + if (features[j].id == LZMA_VLI_UNKNOWN) + return LZMA_OPTIONS_ERROR; + + // If the previous filter in the chain cannot be a non-last + // filter, the chain is invalid. + if (!non_last_ok) + return LZMA_OPTIONS_ERROR; + + non_last_ok = features[j].non_last_ok; + last_ok = features[j].last_ok; + changes_size_count += features[j].changes_size; + + } while (filters[++i].id != LZMA_VLI_UNKNOWN); + + // There must be 1-4 filters. The last filter must be usable as + // the last filter in the chain. A maximum of three filters are + // allowed to change the size of the data. + if (i > LZMA_FILTERS_MAX || !last_ok || changes_size_count > 3) + return LZMA_OPTIONS_ERROR; + + *count = i; + return LZMA_OK; +} + + +extern lzma_ret +lzma_raw_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *options, + lzma_filter_find coder_find, bool is_encoder) +{ + // Do some basic validation and get the number of filters. + size_t count; + return_if_error(lzma_validate_chain(options, &count)); + + // Set the filter functions and copy the options pointer. + lzma_filter_info filters[LZMA_FILTERS_MAX + 1]; + if (is_encoder) { + for (size_t i = 0; i < count; ++i) { + // The order of the filters is reversed in the + // encoder. It allows more efficient handling + // of the uncompressed data. + const size_t j = count - i - 1; + + const lzma_filter_coder *const fc + = coder_find(options[i].id); + if (fc == NULL || fc->init == NULL) + return LZMA_OPTIONS_ERROR; + + filters[j].id = options[i].id; + filters[j].init = fc->init; + filters[j].options = options[i].options; + } + } else { + for (size_t i = 0; i < count; ++i) { + const lzma_filter_coder *const fc + = coder_find(options[i].id); + if (fc == NULL || fc->init == NULL) + return LZMA_OPTIONS_ERROR; + + filters[i].id = options[i].id; + filters[i].init = fc->init; + filters[i].options = options[i].options; + } + } + + // Terminate the array. + filters[count].id = LZMA_VLI_UNKNOWN; + filters[count].init = NULL; + + // Initialize the filters. + const lzma_ret ret = lzma_next_filter_init(next, allocator, filters); + if (ret != LZMA_OK) + lzma_next_end(next, allocator); + + return ret; +} + + +extern uint64_t +lzma_raw_coder_memusage(lzma_filter_find coder_find, + const lzma_filter *filters) +{ + // The chain has to have at least one filter. + { + size_t tmp; + if (lzma_validate_chain(filters, &tmp) != LZMA_OK) + return UINT64_MAX; + } + + uint64_t total = 0; + size_t i = 0; + + do { + const lzma_filter_coder *const fc + = coder_find(filters[i].id); + if (fc == NULL) + return UINT64_MAX; // Unsupported Filter ID + + if (fc->memusage == NULL) { + // This filter doesn't have a function to calculate + // the memory usage and validate the options. Such + // filters need only little memory, so we use 1 KiB + // as a good estimate. They also accept all possible + // options, so there's no need to worry about lack + // of validation. + total += 1024; + } else { + // Call the filter-specific memory usage calculation + // function. + const uint64_t usage + = fc->memusage(filters[i].options); + if (usage == UINT64_MAX) + return UINT64_MAX; // Invalid options + + total += usage; + } + } while (filters[++i].id != LZMA_VLI_UNKNOWN); + + // Add some fixed amount of extra. It's to compensate memory usage + // of Stream, Block etc. coders, malloc() overhead, stack etc. + return total + LZMA_MEMUSAGE_BASE; +} diff --git a/src/liblzma/common/filter_common.h b/src/liblzma/common/filter_common.h new file mode 100644 index 0000000..2e47bb6 --- /dev/null +++ b/src/liblzma/common/filter_common.h @@ -0,0 +1,51 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_common.h +/// \brief Filter-specific stuff common for both encoder and decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_FILTER_COMMON_H +#define LZMA_FILTER_COMMON_H + +#include "common.h" + + +/// Both lzma_filter_encoder and lzma_filter_decoder begin with these members. +typedef struct { + /// Filter ID + lzma_vli id; + + /// Initializes the filter encoder and calls lzma_next_filter_init() + /// for filters + 1. + lzma_init_function init; + + /// Calculates memory usage of the encoder. If the options are + /// invalid, UINT64_MAX is returned. + uint64_t (*memusage)(const void *options); + +} lzma_filter_coder; + + +typedef const lzma_filter_coder *(*lzma_filter_find)(lzma_vli id); + + +extern lzma_ret lzma_validate_chain(const lzma_filter *filters, size_t *count); + + +extern lzma_ret lzma_raw_coder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *filters, + lzma_filter_find coder_find, bool is_encoder); + + +extern uint64_t lzma_raw_coder_memusage(lzma_filter_find coder_find, + const lzma_filter *filters); + + +#endif diff --git a/src/liblzma/common/filter_decoder.c b/src/liblzma/common/filter_decoder.c new file mode 100644 index 0000000..fa53f5b --- /dev/null +++ b/src/liblzma/common/filter_decoder.c @@ -0,0 +1,198 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_decoder.c +/// \brief Filter ID mapping to filter-specific functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_decoder.h" +#include "filter_common.h" +#include "lzma_decoder.h" +#include "lzma2_decoder.h" +#include "simple_decoder.h" +#include "delta_decoder.h" + + +typedef struct { + /// Filter ID + lzma_vli id; + + /// Initializes the filter encoder and calls lzma_next_filter_init() + /// for filters + 1. + lzma_init_function init; + + /// Calculates memory usage of the encoder. If the options are + /// invalid, UINT64_MAX is returned. + uint64_t (*memusage)(const void *options); + + /// Decodes Filter Properties. + /// + /// \return - LZMA_OK: Properties decoded successfully. + /// - LZMA_OPTIONS_ERROR: Unsupported properties + /// - LZMA_MEM_ERROR: Memory allocation failed. + lzma_ret (*props_decode)( + void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size); + +} lzma_filter_decoder; + + +static const lzma_filter_decoder decoders[] = { +#ifdef HAVE_DECODER_LZMA1 + { + .id = LZMA_FILTER_LZMA1, + .init = &lzma_lzma_decoder_init, + .memusage = &lzma_lzma_decoder_memusage, + .props_decode = &lzma_lzma_props_decode, + }, + { + .id = LZMA_FILTER_LZMA1EXT, + .init = &lzma_lzma_decoder_init, + .memusage = &lzma_lzma_decoder_memusage, + .props_decode = &lzma_lzma_props_decode, + }, +#endif +#ifdef HAVE_DECODER_LZMA2 + { + .id = LZMA_FILTER_LZMA2, + .init = &lzma_lzma2_decoder_init, + .memusage = &lzma_lzma2_decoder_memusage, + .props_decode = &lzma_lzma2_props_decode, + }, +#endif +#ifdef HAVE_DECODER_X86 + { + .id = LZMA_FILTER_X86, + .init = &lzma_simple_x86_decoder_init, + .memusage = NULL, + .props_decode = &lzma_simple_props_decode, + }, +#endif +#ifdef HAVE_DECODER_POWERPC + { + .id = LZMA_FILTER_POWERPC, + .init = &lzma_simple_powerpc_decoder_init, + .memusage = NULL, + .props_decode = &lzma_simple_props_decode, + }, +#endif +#ifdef HAVE_DECODER_IA64 + { + .id = LZMA_FILTER_IA64, + .init = &lzma_simple_ia64_decoder_init, + .memusage = NULL, + .props_decode = &lzma_simple_props_decode, + }, +#endif +#ifdef HAVE_DECODER_ARM + { + .id = LZMA_FILTER_ARM, + .init = &lzma_simple_arm_decoder_init, + .memusage = NULL, + .props_decode = &lzma_simple_props_decode, + }, +#endif +#ifdef HAVE_DECODER_ARMTHUMB + { + .id = LZMA_FILTER_ARMTHUMB, + .init = &lzma_simple_armthumb_decoder_init, + .memusage = NULL, + .props_decode = &lzma_simple_props_decode, + }, +#endif +#ifdef HAVE_DECODER_ARM64 + { + .id = LZMA_FILTER_ARM64, + .init = &lzma_simple_arm64_decoder_init, + .memusage = NULL, + .props_decode = &lzma_simple_props_decode, + }, +#endif +#ifdef HAVE_DECODER_SPARC + { + .id = LZMA_FILTER_SPARC, + .init = &lzma_simple_sparc_decoder_init, + .memusage = NULL, + .props_decode = &lzma_simple_props_decode, + }, +#endif +#ifdef HAVE_DECODER_DELTA + { + .id = LZMA_FILTER_DELTA, + .init = &lzma_delta_decoder_init, + .memusage = &lzma_delta_coder_memusage, + .props_decode = &lzma_delta_props_decode, + }, +#endif +}; + + +static const lzma_filter_decoder * +decoder_find(lzma_vli id) +{ + for (size_t i = 0; i < ARRAY_SIZE(decoders); ++i) + if (decoders[i].id == id) + return decoders + i; + + return NULL; +} + + +extern LZMA_API(lzma_bool) +lzma_filter_decoder_is_supported(lzma_vli id) +{ + return decoder_find(id) != NULL; +} + + +extern lzma_ret +lzma_raw_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *options) +{ + return lzma_raw_coder_init(next, allocator, + options, (lzma_filter_find)(&decoder_find), false); +} + + +extern LZMA_API(lzma_ret) +lzma_raw_decoder(lzma_stream *strm, const lzma_filter *options) +{ + lzma_next_strm_init(lzma_raw_decoder_init, strm, options); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} + + +extern LZMA_API(uint64_t) +lzma_raw_decoder_memusage(const lzma_filter *filters) +{ + return lzma_raw_coder_memusage( + (lzma_filter_find)(&decoder_find), filters); +} + + +extern LZMA_API(lzma_ret) +lzma_properties_decode(lzma_filter *filter, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size) +{ + // Make it always NULL so that the caller can always safely free() it. + filter->options = NULL; + + const lzma_filter_decoder *const fd = decoder_find(filter->id); + if (fd == NULL) + return LZMA_OPTIONS_ERROR; + + if (fd->props_decode == NULL) + return props_size == 0 ? LZMA_OK : LZMA_OPTIONS_ERROR; + + return fd->props_decode( + &filter->options, allocator, props, props_size); +} diff --git a/src/liblzma/common/filter_decoder.h b/src/liblzma/common/filter_decoder.h new file mode 100644 index 0000000..2dac602 --- /dev/null +++ b/src/liblzma/common/filter_decoder.h @@ -0,0 +1,23 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_decoder.h +/// \brief Filter ID mapping to filter-specific functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_FILTER_DECODER_H +#define LZMA_FILTER_DECODER_H + +#include "common.h" + + +extern lzma_ret lzma_raw_decoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *options); + +#endif diff --git a/src/liblzma/common/filter_encoder.c b/src/liblzma/common/filter_encoder.c new file mode 100644 index 0000000..46fe8af --- /dev/null +++ b/src/liblzma/common/filter_encoder.c @@ -0,0 +1,308 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_decoder.c +/// \brief Filter ID mapping to filter-specific functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_encoder.h" +#include "filter_common.h" +#include "lzma_encoder.h" +#include "lzma2_encoder.h" +#include "simple_encoder.h" +#include "delta_encoder.h" + + +typedef struct { + /// Filter ID + lzma_vli id; + + /// Initializes the filter encoder and calls lzma_next_filter_init() + /// for filters + 1. + lzma_init_function init; + + /// Calculates memory usage of the encoder. If the options are + /// invalid, UINT64_MAX is returned. + uint64_t (*memusage)(const void *options); + + /// Calculates the recommended Uncompressed Size for .xz Blocks to + /// which the input data can be split to make multithreaded + /// encoding possible. If this is NULL, it is assumed that + /// the encoder is fast enough with single thread. + uint64_t (*block_size)(const void *options); + + /// Tells the size of the Filter Properties field. If options are + /// invalid, LZMA_OPTIONS_ERROR is returned and size is set to + /// UINT32_MAX. + lzma_ret (*props_size_get)(uint32_t *size, const void *options); + + /// Some filters will always have the same size Filter Properties + /// field. If props_size_get is NULL, this value is used. + uint32_t props_size_fixed; + + /// Encodes Filter Properties. + /// + /// \return - LZMA_OK: Properties encoded successfully. + /// - LZMA_OPTIONS_ERROR: Unsupported options + /// - LZMA_PROG_ERROR: Invalid options or not enough + /// output space + lzma_ret (*props_encode)(const void *options, uint8_t *out); + +} lzma_filter_encoder; + + +static const lzma_filter_encoder encoders[] = { +#ifdef HAVE_ENCODER_LZMA1 + { + .id = LZMA_FILTER_LZMA1, + .init = &lzma_lzma_encoder_init, + .memusage = &lzma_lzma_encoder_memusage, + .block_size = NULL, // Not needed for LZMA1 + .props_size_get = NULL, + .props_size_fixed = 5, + .props_encode = &lzma_lzma_props_encode, + }, + { + .id = LZMA_FILTER_LZMA1EXT, + .init = &lzma_lzma_encoder_init, + .memusage = &lzma_lzma_encoder_memusage, + .block_size = NULL, // Not needed for LZMA1 + .props_size_get = NULL, + .props_size_fixed = 5, + .props_encode = &lzma_lzma_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_LZMA2 + { + .id = LZMA_FILTER_LZMA2, + .init = &lzma_lzma2_encoder_init, + .memusage = &lzma_lzma2_encoder_memusage, + .block_size = &lzma_lzma2_block_size, + .props_size_get = NULL, + .props_size_fixed = 1, + .props_encode = &lzma_lzma2_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_X86 + { + .id = LZMA_FILTER_X86, + .init = &lzma_simple_x86_encoder_init, + .memusage = NULL, + .block_size = NULL, + .props_size_get = &lzma_simple_props_size, + .props_encode = &lzma_simple_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_POWERPC + { + .id = LZMA_FILTER_POWERPC, + .init = &lzma_simple_powerpc_encoder_init, + .memusage = NULL, + .block_size = NULL, + .props_size_get = &lzma_simple_props_size, + .props_encode = &lzma_simple_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_IA64 + { + .id = LZMA_FILTER_IA64, + .init = &lzma_simple_ia64_encoder_init, + .memusage = NULL, + .block_size = NULL, + .props_size_get = &lzma_simple_props_size, + .props_encode = &lzma_simple_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_ARM + { + .id = LZMA_FILTER_ARM, + .init = &lzma_simple_arm_encoder_init, + .memusage = NULL, + .block_size = NULL, + .props_size_get = &lzma_simple_props_size, + .props_encode = &lzma_simple_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_ARMTHUMB + { + .id = LZMA_FILTER_ARMTHUMB, + .init = &lzma_simple_armthumb_encoder_init, + .memusage = NULL, + .block_size = NULL, + .props_size_get = &lzma_simple_props_size, + .props_encode = &lzma_simple_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_ARM64 + { + .id = LZMA_FILTER_ARM64, + .init = &lzma_simple_arm64_encoder_init, + .memusage = NULL, + .block_size = NULL, + .props_size_get = &lzma_simple_props_size, + .props_encode = &lzma_simple_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_SPARC + { + .id = LZMA_FILTER_SPARC, + .init = &lzma_simple_sparc_encoder_init, + .memusage = NULL, + .block_size = NULL, + .props_size_get = &lzma_simple_props_size, + .props_encode = &lzma_simple_props_encode, + }, +#endif +#ifdef HAVE_ENCODER_DELTA + { + .id = LZMA_FILTER_DELTA, + .init = &lzma_delta_encoder_init, + .memusage = &lzma_delta_coder_memusage, + .block_size = NULL, + .props_size_get = NULL, + .props_size_fixed = 1, + .props_encode = &lzma_delta_props_encode, + }, +#endif +}; + + +static const lzma_filter_encoder * +encoder_find(lzma_vli id) +{ + for (size_t i = 0; i < ARRAY_SIZE(encoders); ++i) + if (encoders[i].id == id) + return encoders + i; + + return NULL; +} + + +extern LZMA_API(lzma_bool) +lzma_filter_encoder_is_supported(lzma_vli id) +{ + return encoder_find(id) != NULL; +} + + +extern LZMA_API(lzma_ret) +lzma_filters_update(lzma_stream *strm, const lzma_filter *filters) +{ + if (strm->internal->next.update == NULL) + return LZMA_PROG_ERROR; + + // Validate the filter chain. + if (lzma_raw_encoder_memusage(filters) == UINT64_MAX) + return LZMA_OPTIONS_ERROR; + + // The actual filter chain in the encoder is reversed. Some things + // still want the normal order chain, so we provide both. + size_t count = 1; + while (filters[count].id != LZMA_VLI_UNKNOWN) + ++count; + + lzma_filter reversed_filters[LZMA_FILTERS_MAX + 1]; + for (size_t i = 0; i < count; ++i) + reversed_filters[count - i - 1] = filters[i]; + + reversed_filters[count].id = LZMA_VLI_UNKNOWN; + + return strm->internal->next.update(strm->internal->next.coder, + strm->allocator, filters, reversed_filters); +} + + +extern lzma_ret +lzma_raw_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *options) +{ + return lzma_raw_coder_init(next, allocator, + options, (lzma_filter_find)(&encoder_find), true); +} + + +extern LZMA_API(lzma_ret) +lzma_raw_encoder(lzma_stream *strm, const lzma_filter *options) +{ + lzma_next_strm_init(lzma_raw_coder_init, strm, options, + (lzma_filter_find)(&encoder_find), true); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_SYNC_FLUSH] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} + + +extern LZMA_API(uint64_t) +lzma_raw_encoder_memusage(const lzma_filter *filters) +{ + return lzma_raw_coder_memusage( + (lzma_filter_find)(&encoder_find), filters); +} + + +extern uint64_t +lzma_mt_block_size(const lzma_filter *filters) +{ + uint64_t max = 0; + + for (size_t i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i) { + const lzma_filter_encoder *const fe + = encoder_find(filters[i].id); + if (fe->block_size != NULL) { + const uint64_t size + = fe->block_size(filters[i].options); + if (size == 0) + return 0; + + if (size > max) + max = size; + } + } + + return max; +} + + +extern LZMA_API(lzma_ret) +lzma_properties_size(uint32_t *size, const lzma_filter *filter) +{ + const lzma_filter_encoder *const fe = encoder_find(filter->id); + if (fe == NULL) { + // Unknown filter - if the Filter ID is a proper VLI, + // return LZMA_OPTIONS_ERROR instead of LZMA_PROG_ERROR, + // because it's possible that we just don't have support + // compiled in for the requested filter. + return filter->id <= LZMA_VLI_MAX + ? LZMA_OPTIONS_ERROR : LZMA_PROG_ERROR; + } + + if (fe->props_size_get == NULL) { + // No props_size_get() function, use props_size_fixed. + *size = fe->props_size_fixed; + return LZMA_OK; + } + + return fe->props_size_get(size, filter->options); +} + + +extern LZMA_API(lzma_ret) +lzma_properties_encode(const lzma_filter *filter, uint8_t *props) +{ + const lzma_filter_encoder *const fe = encoder_find(filter->id); + if (fe == NULL) + return LZMA_PROG_ERROR; + + if (fe->props_encode == NULL) + return LZMA_OK; + + return fe->props_encode(filter->options, props); +} diff --git a/src/liblzma/common/filter_encoder.h b/src/liblzma/common/filter_encoder.h new file mode 100644 index 0000000..f1d5683 --- /dev/null +++ b/src/liblzma/common/filter_encoder.h @@ -0,0 +1,27 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_encoder.c +/// \brief Filter ID mapping to filter-specific functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_FILTER_ENCODER_H +#define LZMA_FILTER_ENCODER_H + +#include "common.h" + + +// FIXME: Might become a part of the public API. +extern uint64_t lzma_mt_block_size(const lzma_filter *filters); + + +extern lzma_ret lzma_raw_encoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *filters); + +#endif diff --git a/src/liblzma/common/filter_flags_decoder.c b/src/liblzma/common/filter_flags_decoder.c new file mode 100644 index 0000000..ddfb085 --- /dev/null +++ b/src/liblzma/common/filter_flags_decoder.c @@ -0,0 +1,46 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_flags_decoder.c +/// \brief Decodes a Filter Flags field +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_decoder.h" + + +extern LZMA_API(lzma_ret) +lzma_filter_flags_decode( + lzma_filter *filter, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size) +{ + // Set the pointer to NULL so the caller can always safely free it. + filter->options = NULL; + + // Filter ID + return_if_error(lzma_vli_decode(&filter->id, NULL, + in, in_pos, in_size)); + + if (filter->id >= LZMA_FILTER_RESERVED_START) + return LZMA_DATA_ERROR; + + // Size of Properties + lzma_vli props_size; + return_if_error(lzma_vli_decode(&props_size, NULL, + in, in_pos, in_size)); + + // Filter Properties + if (in_size - *in_pos < props_size) + return LZMA_DATA_ERROR; + + const lzma_ret ret = lzma_properties_decode( + filter, allocator, in + *in_pos, props_size); + + *in_pos += props_size; + + return ret; +} diff --git a/src/liblzma/common/filter_flags_encoder.c b/src/liblzma/common/filter_flags_encoder.c new file mode 100644 index 0000000..b57b9fd --- /dev/null +++ b/src/liblzma/common/filter_flags_encoder.c @@ -0,0 +1,56 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file filter_flags_encoder.c +/// \brief Encodes a Filter Flags field +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_encoder.h" + + +extern LZMA_API(lzma_ret) +lzma_filter_flags_size(uint32_t *size, const lzma_filter *filter) +{ + if (filter->id >= LZMA_FILTER_RESERVED_START) + return LZMA_PROG_ERROR; + + return_if_error(lzma_properties_size(size, filter)); + + *size += lzma_vli_size(filter->id) + lzma_vli_size(*size); + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_filter_flags_encode(const lzma_filter *filter, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // Filter ID + if (filter->id >= LZMA_FILTER_RESERVED_START) + return LZMA_PROG_ERROR; + + return_if_error(lzma_vli_encode(filter->id, NULL, + out, out_pos, out_size)); + + // Size of Properties + uint32_t props_size; + return_if_error(lzma_properties_size(&props_size, filter)); + return_if_error(lzma_vli_encode(props_size, NULL, + out, out_pos, out_size)); + + // Filter Properties + if (out_size - *out_pos < props_size) + return LZMA_PROG_ERROR; + + return_if_error(lzma_properties_encode(filter, out + *out_pos)); + + *out_pos += props_size; + + return LZMA_OK; +} diff --git a/src/liblzma/common/hardware_cputhreads.c b/src/liblzma/common/hardware_cputhreads.c new file mode 100644 index 0000000..5d246d2 --- /dev/null +++ b/src/liblzma/common/hardware_cputhreads.c @@ -0,0 +1,34 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file hardware_cputhreads.c +/// \brief Get the number of CPU threads or cores +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + +#include "tuklib_cpucores.h" + + +#ifdef HAVE_SYMBOL_VERSIONS_LINUX +// This is for compatibility with binaries linked against liblzma that +// has been patched with xz-5.2.2-compat-libs.patch from RHEL/CentOS 7. +LZMA_SYMVER_API("lzma_cputhreads@XZ_5.2.2", + uint32_t, lzma_cputhreads_522)(void) lzma_nothrow + __attribute__((__alias__("lzma_cputhreads_52"))); + +LZMA_SYMVER_API("lzma_cputhreads@@XZ_5.2", + uint32_t, lzma_cputhreads_52)(void) lzma_nothrow; + +#define lzma_cputhreads lzma_cputhreads_52 +#endif +extern LZMA_API(uint32_t) +lzma_cputhreads(void) +{ + return tuklib_cpucores(); +} diff --git a/src/liblzma/common/hardware_physmem.c b/src/liblzma/common/hardware_physmem.c new file mode 100644 index 0000000..a2bbbe2 --- /dev/null +++ b/src/liblzma/common/hardware_physmem.c @@ -0,0 +1,25 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file hardware_physmem.c +/// \brief Get the total amount of physical memory (RAM) +// +// Author: Jonathan Nieder +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + +#include "tuklib_physmem.h" + + +extern LZMA_API(uint64_t) +lzma_physmem(void) +{ + // It is simpler to make lzma_physmem() a wrapper for + // tuklib_physmem() than to hack appropriate symbol visibility + // support for the tuklib modules. + return tuklib_physmem(); +} diff --git a/src/liblzma/common/index.c b/src/liblzma/common/index.c new file mode 100644 index 0000000..97cc9f9 --- /dev/null +++ b/src/liblzma/common/index.c @@ -0,0 +1,1263 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file index.c +/// \brief Handling of .xz Indexes and some other Stream information +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "index.h" +#include "stream_flags_common.h" + + +/// \brief How many Records to allocate at once +/// +/// This should be big enough to avoid making lots of tiny allocations +/// but small enough to avoid too much unused memory at once. +#define INDEX_GROUP_SIZE 512 + + +/// \brief How many Records can be allocated at once at maximum +#define PREALLOC_MAX ((SIZE_MAX - sizeof(index_group)) / sizeof(index_record)) + + +/// \brief Base structure for index_stream and index_group structures +typedef struct index_tree_node_s index_tree_node; +struct index_tree_node_s { + /// Uncompressed start offset of this Stream (relative to the + /// beginning of the file) or Block (relative to the beginning + /// of the Stream) + lzma_vli uncompressed_base; + + /// Compressed start offset of this Stream or Block + lzma_vli compressed_base; + + index_tree_node *parent; + index_tree_node *left; + index_tree_node *right; +}; + + +/// \brief AVL tree to hold index_stream or index_group structures +typedef struct { + /// Root node + index_tree_node *root; + + /// Leftmost node. Since the tree will be filled sequentially, + /// this won't change after the first node has been added to + /// the tree. + index_tree_node *leftmost; + + /// The rightmost node in the tree. Since the tree is filled + /// sequentially, this is always the node where to add the new data. + index_tree_node *rightmost; + + /// Number of nodes in the tree + uint32_t count; + +} index_tree; + + +typedef struct { + lzma_vli uncompressed_sum; + lzma_vli unpadded_sum; +} index_record; + + +typedef struct { + /// Every Record group is part of index_stream.groups tree. + index_tree_node node; + + /// Number of Blocks in this Stream before this group. + lzma_vli number_base; + + /// Number of Records that can be put in records[]. + size_t allocated; + + /// Index of the last Record in use. + size_t last; + + /// The sizes in this array are stored as cumulative sums relative + /// to the beginning of the Stream. This makes it possible to + /// use binary search in lzma_index_locate(). + /// + /// Note that the cumulative summing is done specially for + /// unpadded_sum: The previous value is rounded up to the next + /// multiple of four before adding the Unpadded Size of the new + /// Block. The total encoded size of the Blocks in the Stream + /// is records[last].unpadded_sum in the last Record group of + /// the Stream. + /// + /// For example, if the Unpadded Sizes are 39, 57, and 81, the + /// stored values are 39, 97 (40 + 57), and 181 (100 + 181). + /// The total encoded size of these Blocks is 184. + /// + /// This is a flexible array, because it makes easy to optimize + /// memory usage in case someone concatenates many Streams that + /// have only one or few Blocks. + index_record records[]; + +} index_group; + + +typedef struct { + /// Every index_stream is a node in the tree of Streams. + index_tree_node node; + + /// Number of this Stream (first one is 1) + uint32_t number; + + /// Total number of Blocks before this Stream + lzma_vli block_number_base; + + /// Record groups of this Stream are stored in a tree. + /// It's a T-tree with AVL-tree balancing. There are + /// INDEX_GROUP_SIZE Records per node by default. + /// This keeps the number of memory allocations reasonable + /// and finding a Record is fast. + index_tree groups; + + /// Number of Records in this Stream + lzma_vli record_count; + + /// Size of the List of Records field in this Stream. This is used + /// together with record_count to calculate the size of the Index + /// field and thus the total size of the Stream. + lzma_vli index_list_size; + + /// Stream Flags of this Stream. This is meaningful only if + /// the Stream Flags have been told us with lzma_index_stream_flags(). + /// Initially stream_flags.version is set to UINT32_MAX to indicate + /// that the Stream Flags are unknown. + lzma_stream_flags stream_flags; + + /// Amount of Stream Padding after this Stream. This defaults to + /// zero and can be set with lzma_index_stream_padding(). + lzma_vli stream_padding; + +} index_stream; + + +struct lzma_index_s { + /// AVL-tree containing the Stream(s). Often there is just one + /// Stream, but using a tree keeps lookups fast even when there + /// are many concatenated Streams. + index_tree streams; + + /// Uncompressed size of all the Blocks in the Stream(s) + lzma_vli uncompressed_size; + + /// Total size of all the Blocks in the Stream(s) + lzma_vli total_size; + + /// Total number of Records in all Streams in this lzma_index + lzma_vli record_count; + + /// Size of the List of Records field if all the Streams in this + /// lzma_index were packed into a single Stream (makes it simpler to + /// take many .xz files and combine them into a single Stream). + /// + /// This value together with record_count is needed to calculate + /// Backward Size that is stored into Stream Footer. + lzma_vli index_list_size; + + /// How many Records to allocate at once in lzma_index_append(). + /// This defaults to INDEX_GROUP_SIZE but can be overridden with + /// lzma_index_prealloc(). + size_t prealloc; + + /// Bitmask indicating what integrity check types have been used + /// as set by lzma_index_stream_flags(). The bit of the last Stream + /// is not included here, since it is possible to change it by + /// calling lzma_index_stream_flags() again. + uint32_t checks; +}; + + +static void +index_tree_init(index_tree *tree) +{ + tree->root = NULL; + tree->leftmost = NULL; + tree->rightmost = NULL; + tree->count = 0; + return; +} + + +/// Helper for index_tree_end() +static void +index_tree_node_end(index_tree_node *node, const lzma_allocator *allocator, + void (*free_func)(void *node, const lzma_allocator *allocator)) +{ + // The tree won't ever be very huge, so recursion should be fine. + // 20 levels in the tree is likely quite a lot already in practice. + if (node->left != NULL) + index_tree_node_end(node->left, allocator, free_func); + + if (node->right != NULL) + index_tree_node_end(node->right, allocator, free_func); + + free_func(node, allocator); + return; +} + + +/// Free the memory allocated for a tree. Each node is freed using the +/// given free_func which is either &lzma_free or &index_stream_end. +/// The latter is used to free the Record groups from each index_stream +/// before freeing the index_stream itself. +static void +index_tree_end(index_tree *tree, const lzma_allocator *allocator, + void (*free_func)(void *node, const lzma_allocator *allocator)) +{ + assert(free_func != NULL); + + if (tree->root != NULL) + index_tree_node_end(tree->root, allocator, free_func); + + return; +} + + +/// Add a new node to the tree. node->uncompressed_base and +/// node->compressed_base must have been set by the caller already. +static void +index_tree_append(index_tree *tree, index_tree_node *node) +{ + node->parent = tree->rightmost; + node->left = NULL; + node->right = NULL; + + ++tree->count; + + // Handle the special case of adding the first node. + if (tree->root == NULL) { + tree->root = node; + tree->leftmost = node; + tree->rightmost = node; + return; + } + + // The tree is always filled sequentially. + assert(tree->rightmost->uncompressed_base <= node->uncompressed_base); + assert(tree->rightmost->compressed_base < node->compressed_base); + + // Add the new node after the rightmost node. It's the correct + // place due to the reason above. + tree->rightmost->right = node; + tree->rightmost = node; + + // Balance the AVL-tree if needed. We don't need to keep the balance + // factors in nodes, because we always fill the tree sequentially, + // and thus know the state of the tree just by looking at the node + // count. From the node count we can calculate how many steps to go + // up in the tree to find the rotation root. + uint32_t up = tree->count ^ (UINT32_C(1) << bsr32(tree->count)); + if (up != 0) { + // Locate the root node for the rotation. + up = ctz32(tree->count) + 2; + do { + node = node->parent; + } while (--up > 0); + + // Rotate left using node as the rotation root. + index_tree_node *pivot = node->right; + + if (node->parent == NULL) { + tree->root = pivot; + } else { + assert(node->parent->right == node); + node->parent->right = pivot; + } + + pivot->parent = node->parent; + + node->right = pivot->left; + if (node->right != NULL) + node->right->parent = node; + + pivot->left = node; + node->parent = pivot; + } + + return; +} + + +/// Get the next node in the tree. Return NULL if there are no more nodes. +static void * +index_tree_next(const index_tree_node *node) +{ + if (node->right != NULL) { + node = node->right; + while (node->left != NULL) + node = node->left; + + return (void *)(node); + } + + while (node->parent != NULL && node->parent->right == node) + node = node->parent; + + return (void *)(node->parent); +} + + +/// Locate a node that contains the given uncompressed offset. It is +/// caller's job to check that target is not bigger than the uncompressed +/// size of the tree (the last node would be returned in that case still). +static void * +index_tree_locate(const index_tree *tree, lzma_vli target) +{ + const index_tree_node *result = NULL; + const index_tree_node *node = tree->root; + + assert(tree->leftmost == NULL + || tree->leftmost->uncompressed_base == 0); + + // Consecutive nodes may have the same uncompressed_base. + // We must pick the rightmost one. + while (node != NULL) { + if (node->uncompressed_base > target) { + node = node->left; + } else { + result = node; + node = node->right; + } + } + + return (void *)(result); +} + + +/// Allocate and initialize a new Stream using the given base offsets. +static index_stream * +index_stream_init(lzma_vli compressed_base, lzma_vli uncompressed_base, + uint32_t stream_number, lzma_vli block_number_base, + const lzma_allocator *allocator) +{ + index_stream *s = lzma_alloc(sizeof(index_stream), allocator); + if (s == NULL) + return NULL; + + s->node.uncompressed_base = uncompressed_base; + s->node.compressed_base = compressed_base; + s->node.parent = NULL; + s->node.left = NULL; + s->node.right = NULL; + + s->number = stream_number; + s->block_number_base = block_number_base; + + index_tree_init(&s->groups); + + s->record_count = 0; + s->index_list_size = 0; + s->stream_flags.version = UINT32_MAX; + s->stream_padding = 0; + + return s; +} + + +/// Free the memory allocated for a Stream and its Record groups. +static void +index_stream_end(void *node, const lzma_allocator *allocator) +{ + index_stream *s = node; + index_tree_end(&s->groups, allocator, &lzma_free); + lzma_free(s, allocator); + return; +} + + +static lzma_index * +index_init_plain(const lzma_allocator *allocator) +{ + lzma_index *i = lzma_alloc(sizeof(lzma_index), allocator); + if (i != NULL) { + index_tree_init(&i->streams); + i->uncompressed_size = 0; + i->total_size = 0; + i->record_count = 0; + i->index_list_size = 0; + i->prealloc = INDEX_GROUP_SIZE; + i->checks = 0; + } + + return i; +} + + +extern LZMA_API(lzma_index *) +lzma_index_init(const lzma_allocator *allocator) +{ + lzma_index *i = index_init_plain(allocator); + if (i == NULL) + return NULL; + + index_stream *s = index_stream_init(0, 0, 1, 0, allocator); + if (s == NULL) { + lzma_free(i, allocator); + return NULL; + } + + index_tree_append(&i->streams, &s->node); + + return i; +} + + +extern LZMA_API(void) +lzma_index_end(lzma_index *i, const lzma_allocator *allocator) +{ + // NOTE: If you modify this function, check also the bottom + // of lzma_index_cat(). + if (i != NULL) { + index_tree_end(&i->streams, allocator, &index_stream_end); + lzma_free(i, allocator); + } + + return; +} + + +extern void +lzma_index_prealloc(lzma_index *i, lzma_vli records) +{ + if (records > PREALLOC_MAX) + records = PREALLOC_MAX; + + i->prealloc = (size_t)(records); + return; +} + + +extern LZMA_API(uint64_t) +lzma_index_memusage(lzma_vli streams, lzma_vli blocks) +{ + // This calculates an upper bound that is only a little bit + // bigger than the exact maximum memory usage with the given + // parameters. + + // Typical malloc() overhead is 2 * sizeof(void *) but we take + // a little bit extra just in case. Using LZMA_MEMUSAGE_BASE + // instead would give too inaccurate estimate. + const size_t alloc_overhead = 4 * sizeof(void *); + + // Amount of memory needed for each Stream base structures. + // We assume that every Stream has at least one Block and + // thus at least one group. + const size_t stream_base = sizeof(index_stream) + + sizeof(index_group) + 2 * alloc_overhead; + + // Amount of memory needed per group. + const size_t group_base = sizeof(index_group) + + INDEX_GROUP_SIZE * sizeof(index_record) + + alloc_overhead; + + // Number of groups. There may actually be more, but that overhead + // has been taken into account in stream_base already. + const lzma_vli groups + = (blocks + INDEX_GROUP_SIZE - 1) / INDEX_GROUP_SIZE; + + // Memory used by index_stream and index_group structures. + const uint64_t streams_mem = streams * stream_base; + const uint64_t groups_mem = groups * group_base; + + // Memory used by the base structure. + const uint64_t index_base = sizeof(lzma_index) + alloc_overhead; + + // Validate the arguments and catch integer overflows. + // Maximum number of Streams is "only" UINT32_MAX, because + // that limit is used by the tree containing the Streams. + const uint64_t limit = UINT64_MAX - index_base; + if (streams == 0 || streams > UINT32_MAX || blocks > LZMA_VLI_MAX + || streams > limit / stream_base + || groups > limit / group_base + || limit - streams_mem < groups_mem) + return UINT64_MAX; + + return index_base + streams_mem + groups_mem; +} + + +extern LZMA_API(uint64_t) +lzma_index_memused(const lzma_index *i) +{ + return lzma_index_memusage(i->streams.count, i->record_count); +} + + +extern LZMA_API(lzma_vli) +lzma_index_block_count(const lzma_index *i) +{ + return i->record_count; +} + + +extern LZMA_API(lzma_vli) +lzma_index_stream_count(const lzma_index *i) +{ + return i->streams.count; +} + + +extern LZMA_API(lzma_vli) +lzma_index_size(const lzma_index *i) +{ + return index_size(i->record_count, i->index_list_size); +} + + +extern LZMA_API(lzma_vli) +lzma_index_total_size(const lzma_index *i) +{ + return i->total_size; +} + + +extern LZMA_API(lzma_vli) +lzma_index_stream_size(const lzma_index *i) +{ + // Stream Header + Blocks + Index + Stream Footer + return LZMA_STREAM_HEADER_SIZE + i->total_size + + index_size(i->record_count, i->index_list_size) + + LZMA_STREAM_HEADER_SIZE; +} + + +static lzma_vli +index_file_size(lzma_vli compressed_base, lzma_vli unpadded_sum, + lzma_vli record_count, lzma_vli index_list_size, + lzma_vli stream_padding) +{ + // Earlier Streams and Stream Paddings + Stream Header + // + Blocks + Index + Stream Footer + Stream Padding + // + // This might go over LZMA_VLI_MAX due to too big unpadded_sum + // when this function is used in lzma_index_append(). + lzma_vli file_size = compressed_base + 2 * LZMA_STREAM_HEADER_SIZE + + stream_padding + vli_ceil4(unpadded_sum); + if (file_size > LZMA_VLI_MAX) + return LZMA_VLI_UNKNOWN; + + // The same applies here. + file_size += index_size(record_count, index_list_size); + if (file_size > LZMA_VLI_MAX) + return LZMA_VLI_UNKNOWN; + + return file_size; +} + + +extern LZMA_API(lzma_vli) +lzma_index_file_size(const lzma_index *i) +{ + const index_stream *s = (const index_stream *)(i->streams.rightmost); + const index_group *g = (const index_group *)(s->groups.rightmost); + return index_file_size(s->node.compressed_base, + g == NULL ? 0 : g->records[g->last].unpadded_sum, + s->record_count, s->index_list_size, + s->stream_padding); +} + + +extern LZMA_API(lzma_vli) +lzma_index_uncompressed_size(const lzma_index *i) +{ + return i->uncompressed_size; +} + + +extern LZMA_API(uint32_t) +lzma_index_checks(const lzma_index *i) +{ + uint32_t checks = i->checks; + + // Get the type of the Check of the last Stream too. + const index_stream *s = (const index_stream *)(i->streams.rightmost); + if (s->stream_flags.version != UINT32_MAX) + checks |= UINT32_C(1) << s->stream_flags.check; + + return checks; +} + + +extern uint32_t +lzma_index_padding_size(const lzma_index *i) +{ + return (LZMA_VLI_C(4) - index_size_unpadded( + i->record_count, i->index_list_size)) & 3; +} + + +extern LZMA_API(lzma_ret) +lzma_index_stream_flags(lzma_index *i, const lzma_stream_flags *stream_flags) +{ + if (i == NULL || stream_flags == NULL) + return LZMA_PROG_ERROR; + + // Validate the Stream Flags. + return_if_error(lzma_stream_flags_compare( + stream_flags, stream_flags)); + + index_stream *s = (index_stream *)(i->streams.rightmost); + s->stream_flags = *stream_flags; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_index_stream_padding(lzma_index *i, lzma_vli stream_padding) +{ + if (i == NULL || stream_padding > LZMA_VLI_MAX + || (stream_padding & 3) != 0) + return LZMA_PROG_ERROR; + + index_stream *s = (index_stream *)(i->streams.rightmost); + + // Check that the new value won't make the file grow too big. + const lzma_vli old_stream_padding = s->stream_padding; + s->stream_padding = 0; + if (lzma_index_file_size(i) + stream_padding > LZMA_VLI_MAX) { + s->stream_padding = old_stream_padding; + return LZMA_DATA_ERROR; + } + + s->stream_padding = stream_padding; + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_index_append(lzma_index *i, const lzma_allocator *allocator, + lzma_vli unpadded_size, lzma_vli uncompressed_size) +{ + // Validate. + if (i == NULL || unpadded_size < UNPADDED_SIZE_MIN + || unpadded_size > UNPADDED_SIZE_MAX + || uncompressed_size > LZMA_VLI_MAX) + return LZMA_PROG_ERROR; + + index_stream *s = (index_stream *)(i->streams.rightmost); + index_group *g = (index_group *)(s->groups.rightmost); + + const lzma_vli compressed_base = g == NULL ? 0 + : vli_ceil4(g->records[g->last].unpadded_sum); + const lzma_vli uncompressed_base = g == NULL ? 0 + : g->records[g->last].uncompressed_sum; + const uint32_t index_list_size_add = lzma_vli_size(unpadded_size) + + lzma_vli_size(uncompressed_size); + + // Check that uncompressed size will not overflow. + if (uncompressed_base + uncompressed_size > LZMA_VLI_MAX) + return LZMA_DATA_ERROR; + + // Check that the file size will stay within limits. + if (index_file_size(s->node.compressed_base, + compressed_base + unpadded_size, s->record_count + 1, + s->index_list_size + index_list_size_add, + s->stream_padding) == LZMA_VLI_UNKNOWN) + return LZMA_DATA_ERROR; + + // The size of the Index field must not exceed the maximum value + // that can be stored in the Backward Size field. + if (index_size(i->record_count + 1, + i->index_list_size + index_list_size_add) + > LZMA_BACKWARD_SIZE_MAX) + return LZMA_DATA_ERROR; + + if (g != NULL && g->last + 1 < g->allocated) { + // There is space in the last group at least for one Record. + ++g->last; + } else { + // We need to allocate a new group. + g = lzma_alloc(sizeof(index_group) + + i->prealloc * sizeof(index_record), + allocator); + if (g == NULL) + return LZMA_MEM_ERROR; + + g->last = 0; + g->allocated = i->prealloc; + + // Reset prealloc so that if the application happens to + // add new Records, the allocation size will be sane. + i->prealloc = INDEX_GROUP_SIZE; + + // Set the start offsets of this group. + g->node.uncompressed_base = uncompressed_base; + g->node.compressed_base = compressed_base; + g->number_base = s->record_count + 1; + + // Add the new group to the Stream. + index_tree_append(&s->groups, &g->node); + } + + // Add the new Record to the group. + g->records[g->last].uncompressed_sum + = uncompressed_base + uncompressed_size; + g->records[g->last].unpadded_sum + = compressed_base + unpadded_size; + + // Update the totals. + ++s->record_count; + s->index_list_size += index_list_size_add; + + i->total_size += vli_ceil4(unpadded_size); + i->uncompressed_size += uncompressed_size; + ++i->record_count; + i->index_list_size += index_list_size_add; + + return LZMA_OK; +} + + +/// Structure to pass info to index_cat_helper() +typedef struct { + /// Uncompressed size of the destination + lzma_vli uncompressed_size; + + /// Compressed file size of the destination + lzma_vli file_size; + + /// Same as above but for Block numbers + lzma_vli block_number_add; + + /// Number of Streams that were in the destination index before we + /// started appending new Streams from the source index. This is + /// used to fix the Stream numbering. + uint32_t stream_number_add; + + /// Destination index' Stream tree + index_tree *streams; + +} index_cat_info; + + +/// Add the Stream nodes from the source index to dest using recursion. +/// Simplest iterative traversal of the source tree wouldn't work, because +/// we update the pointers in nodes when moving them to the destination tree. +static void +index_cat_helper(const index_cat_info *info, index_stream *this) +{ + index_stream *left = (index_stream *)(this->node.left); + index_stream *right = (index_stream *)(this->node.right); + + if (left != NULL) + index_cat_helper(info, left); + + this->node.uncompressed_base += info->uncompressed_size; + this->node.compressed_base += info->file_size; + this->number += info->stream_number_add; + this->block_number_base += info->block_number_add; + index_tree_append(info->streams, &this->node); + + if (right != NULL) + index_cat_helper(info, right); + + return; +} + + +extern LZMA_API(lzma_ret) +lzma_index_cat(lzma_index *restrict dest, lzma_index *restrict src, + const lzma_allocator *allocator) +{ + if (dest == NULL || src == NULL) + return LZMA_PROG_ERROR; + + const lzma_vli dest_file_size = lzma_index_file_size(dest); + + // Check that we don't exceed the file size limits. + if (dest_file_size + lzma_index_file_size(src) > LZMA_VLI_MAX + || dest->uncompressed_size + src->uncompressed_size + > LZMA_VLI_MAX) + return LZMA_DATA_ERROR; + + // Check that the encoded size of the combined lzma_indexes stays + // within limits. In theory, this should be done only if we know + // that the user plans to actually combine the Streams and thus + // construct a single Index (probably rare). However, exceeding + // this limit is quite theoretical, so we do this check always + // to simplify things elsewhere. + { + const lzma_vli dest_size = index_size_unpadded( + dest->record_count, dest->index_list_size); + const lzma_vli src_size = index_size_unpadded( + src->record_count, src->index_list_size); + if (vli_ceil4(dest_size + src_size) > LZMA_BACKWARD_SIZE_MAX) + return LZMA_DATA_ERROR; + } + + // Optimize the last group to minimize memory usage. Allocation has + // to be done before modifying dest or src. + { + index_stream *s = (index_stream *)(dest->streams.rightmost); + index_group *g = (index_group *)(s->groups.rightmost); + if (g != NULL && g->last + 1 < g->allocated) { + assert(g->node.left == NULL); + assert(g->node.right == NULL); + + index_group *newg = lzma_alloc(sizeof(index_group) + + (g->last + 1) + * sizeof(index_record), + allocator); + if (newg == NULL) + return LZMA_MEM_ERROR; + + newg->node = g->node; + newg->allocated = g->last + 1; + newg->last = g->last; + newg->number_base = g->number_base; + + memcpy(newg->records, g->records, newg->allocated + * sizeof(index_record)); + + if (g->node.parent != NULL) { + assert(g->node.parent->right == &g->node); + g->node.parent->right = &newg->node; + } + + if (s->groups.leftmost == &g->node) { + assert(s->groups.root == &g->node); + s->groups.leftmost = &newg->node; + s->groups.root = &newg->node; + } + + assert(s->groups.rightmost == &g->node); + s->groups.rightmost = &newg->node; + + lzma_free(g, allocator); + + // NOTE: newg isn't leaked here because + // newg == (void *)&newg->node. + } + } + + // dest->checks includes the check types of all except the last Stream + // in dest. Set the bit for the check type of the last Stream now so + // that it won't get lost when Stream(s) from src are appended to dest. + dest->checks = lzma_index_checks(dest); + + // Add all the Streams from src to dest. Update the base offsets + // of each Stream from src. + const index_cat_info info = { + .uncompressed_size = dest->uncompressed_size, + .file_size = dest_file_size, + .stream_number_add = dest->streams.count, + .block_number_add = dest->record_count, + .streams = &dest->streams, + }; + index_cat_helper(&info, (index_stream *)(src->streams.root)); + + // Update info about all the combined Streams. + dest->uncompressed_size += src->uncompressed_size; + dest->total_size += src->total_size; + dest->record_count += src->record_count; + dest->index_list_size += src->index_list_size; + dest->checks |= src->checks; + + // There's nothing else left in src than the base structure. + lzma_free(src, allocator); + + return LZMA_OK; +} + + +/// Duplicate an index_stream. +static index_stream * +index_dup_stream(const index_stream *src, const lzma_allocator *allocator) +{ + // Catch a somewhat theoretical integer overflow. + if (src->record_count > PREALLOC_MAX) + return NULL; + + // Allocate and initialize a new Stream. + index_stream *dest = index_stream_init(src->node.compressed_base, + src->node.uncompressed_base, src->number, + src->block_number_base, allocator); + if (dest == NULL) + return NULL; + + // Copy the overall information. + dest->record_count = src->record_count; + dest->index_list_size = src->index_list_size; + dest->stream_flags = src->stream_flags; + dest->stream_padding = src->stream_padding; + + // Return if there are no groups to duplicate. + if (src->groups.leftmost == NULL) + return dest; + + // Allocate memory for the Records. We put all the Records into + // a single group. It's simplest and also tends to make + // lzma_index_locate() a little bit faster with very big Indexes. + index_group *destg = lzma_alloc(sizeof(index_group) + + src->record_count * sizeof(index_record), + allocator); + if (destg == NULL) { + index_stream_end(dest, allocator); + return NULL; + } + + // Initialize destg. + destg->node.uncompressed_base = 0; + destg->node.compressed_base = 0; + destg->number_base = 1; + destg->allocated = src->record_count; + destg->last = src->record_count - 1; + + // Go through all the groups in src and copy the Records into destg. + const index_group *srcg = (const index_group *)(src->groups.leftmost); + size_t i = 0; + do { + memcpy(destg->records + i, srcg->records, + (srcg->last + 1) * sizeof(index_record)); + i += srcg->last + 1; + srcg = index_tree_next(&srcg->node); + } while (srcg != NULL); + + assert(i == destg->allocated); + + // Add the group to the new Stream. + index_tree_append(&dest->groups, &destg->node); + + return dest; +} + + +extern LZMA_API(lzma_index *) +lzma_index_dup(const lzma_index *src, const lzma_allocator *allocator) +{ + // Allocate the base structure (no initial Stream). + lzma_index *dest = index_init_plain(allocator); + if (dest == NULL) + return NULL; + + // Copy the totals. + dest->uncompressed_size = src->uncompressed_size; + dest->total_size = src->total_size; + dest->record_count = src->record_count; + dest->index_list_size = src->index_list_size; + + // Copy the Streams and the groups in them. + const index_stream *srcstream + = (const index_stream *)(src->streams.leftmost); + do { + index_stream *deststream = index_dup_stream( + srcstream, allocator); + if (deststream == NULL) { + lzma_index_end(dest, allocator); + return NULL; + } + + index_tree_append(&dest->streams, &deststream->node); + + srcstream = index_tree_next(&srcstream->node); + } while (srcstream != NULL); + + return dest; +} + + +/// Indexing for lzma_index_iter.internal[] +enum { + ITER_INDEX, + ITER_STREAM, + ITER_GROUP, + ITER_RECORD, + ITER_METHOD, +}; + + +/// Values for lzma_index_iter.internal[ITER_METHOD].s +enum { + ITER_METHOD_NORMAL, + ITER_METHOD_NEXT, + ITER_METHOD_LEFTMOST, +}; + + +static void +iter_set_info(lzma_index_iter *iter) +{ + const lzma_index *i = iter->internal[ITER_INDEX].p; + const index_stream *stream = iter->internal[ITER_STREAM].p; + const index_group *group = iter->internal[ITER_GROUP].p; + const size_t record = iter->internal[ITER_RECORD].s; + + // lzma_index_iter.internal must not contain a pointer to the last + // group in the index, because that may be reallocated by + // lzma_index_cat(). + if (group == NULL) { + // There are no groups. + assert(stream->groups.root == NULL); + iter->internal[ITER_METHOD].s = ITER_METHOD_LEFTMOST; + + } else if (i->streams.rightmost != &stream->node + || stream->groups.rightmost != &group->node) { + // The group is not not the last group in the index. + iter->internal[ITER_METHOD].s = ITER_METHOD_NORMAL; + + } else if (stream->groups.leftmost != &group->node) { + // The group isn't the only group in the Stream, thus we + // know that it must have a parent group i.e. it's not + // the root node. + assert(stream->groups.root != &group->node); + assert(group->node.parent->right == &group->node); + iter->internal[ITER_METHOD].s = ITER_METHOD_NEXT; + iter->internal[ITER_GROUP].p = group->node.parent; + + } else { + // The Stream has only one group. + assert(stream->groups.root == &group->node); + assert(group->node.parent == NULL); + iter->internal[ITER_METHOD].s = ITER_METHOD_LEFTMOST; + iter->internal[ITER_GROUP].p = NULL; + } + + // NOTE: lzma_index_iter.stream.number is lzma_vli but we use uint32_t + // internally. + iter->stream.number = stream->number; + iter->stream.block_count = stream->record_count; + iter->stream.compressed_offset = stream->node.compressed_base; + iter->stream.uncompressed_offset = stream->node.uncompressed_base; + + // iter->stream.flags will be NULL if the Stream Flags haven't been + // set with lzma_index_stream_flags(). + iter->stream.flags = stream->stream_flags.version == UINT32_MAX + ? NULL : &stream->stream_flags; + iter->stream.padding = stream->stream_padding; + + if (stream->groups.rightmost == NULL) { + // Stream has no Blocks. + iter->stream.compressed_size = index_size(0, 0) + + 2 * LZMA_STREAM_HEADER_SIZE; + iter->stream.uncompressed_size = 0; + } else { + const index_group *g = (const index_group *)( + stream->groups.rightmost); + + // Stream Header + Stream Footer + Index + Blocks + iter->stream.compressed_size = 2 * LZMA_STREAM_HEADER_SIZE + + index_size(stream->record_count, + stream->index_list_size) + + vli_ceil4(g->records[g->last].unpadded_sum); + iter->stream.uncompressed_size + = g->records[g->last].uncompressed_sum; + } + + if (group != NULL) { + iter->block.number_in_stream = group->number_base + record; + iter->block.number_in_file = iter->block.number_in_stream + + stream->block_number_base; + + iter->block.compressed_stream_offset + = record == 0 ? group->node.compressed_base + : vli_ceil4(group->records[ + record - 1].unpadded_sum); + iter->block.uncompressed_stream_offset + = record == 0 ? group->node.uncompressed_base + : group->records[record - 1].uncompressed_sum; + + iter->block.uncompressed_size + = group->records[record].uncompressed_sum + - iter->block.uncompressed_stream_offset; + iter->block.unpadded_size + = group->records[record].unpadded_sum + - iter->block.compressed_stream_offset; + iter->block.total_size = vli_ceil4(iter->block.unpadded_size); + + iter->block.compressed_stream_offset + += LZMA_STREAM_HEADER_SIZE; + + iter->block.compressed_file_offset + = iter->block.compressed_stream_offset + + iter->stream.compressed_offset; + iter->block.uncompressed_file_offset + = iter->block.uncompressed_stream_offset + + iter->stream.uncompressed_offset; + } + + return; +} + + +extern LZMA_API(void) +lzma_index_iter_init(lzma_index_iter *iter, const lzma_index *i) +{ + iter->internal[ITER_INDEX].p = i; + lzma_index_iter_rewind(iter); + return; +} + + +extern LZMA_API(void) +lzma_index_iter_rewind(lzma_index_iter *iter) +{ + iter->internal[ITER_STREAM].p = NULL; + iter->internal[ITER_GROUP].p = NULL; + iter->internal[ITER_RECORD].s = 0; + iter->internal[ITER_METHOD].s = ITER_METHOD_NORMAL; + return; +} + + +extern LZMA_API(lzma_bool) +lzma_index_iter_next(lzma_index_iter *iter, lzma_index_iter_mode mode) +{ + // Catch unsupported mode values. + if ((unsigned int)(mode) > LZMA_INDEX_ITER_NONEMPTY_BLOCK) + return true; + + const lzma_index *i = iter->internal[ITER_INDEX].p; + const index_stream *stream = iter->internal[ITER_STREAM].p; + const index_group *group = NULL; + size_t record = iter->internal[ITER_RECORD].s; + + // If we are being asked for the next Stream, leave group to NULL + // so that the rest of the this function thinks that this Stream + // has no groups and will thus go to the next Stream. + if (mode != LZMA_INDEX_ITER_STREAM) { + // Get the pointer to the current group. See iter_set_inf() + // for explanation. + switch (iter->internal[ITER_METHOD].s) { + case ITER_METHOD_NORMAL: + group = iter->internal[ITER_GROUP].p; + break; + + case ITER_METHOD_NEXT: + group = index_tree_next(iter->internal[ITER_GROUP].p); + break; + + case ITER_METHOD_LEFTMOST: + group = (const index_group *)( + stream->groups.leftmost); + break; + } + } + +again: + if (stream == NULL) { + // We at the beginning of the lzma_index. + // Locate the first Stream. + stream = (const index_stream *)(i->streams.leftmost); + if (mode >= LZMA_INDEX_ITER_BLOCK) { + // Since we are being asked to return information + // about the first a Block, skip Streams that have + // no Blocks. + while (stream->groups.leftmost == NULL) { + stream = index_tree_next(&stream->node); + if (stream == NULL) + return true; + } + } + + // Start from the first Record in the Stream. + group = (const index_group *)(stream->groups.leftmost); + record = 0; + + } else if (group != NULL && record < group->last) { + // The next Record is in the same group. + ++record; + + } else { + // This group has no more Records or this Stream has + // no Blocks at all. + record = 0; + + // If group is not NULL, this Stream has at least one Block + // and thus at least one group. Find the next group. + if (group != NULL) + group = index_tree_next(&group->node); + + if (group == NULL) { + // This Stream has no more Records. Find the next + // Stream. If we are being asked to return information + // about a Block, we skip empty Streams. + do { + stream = index_tree_next(&stream->node); + if (stream == NULL) + return true; + } while (mode >= LZMA_INDEX_ITER_BLOCK + && stream->groups.leftmost == NULL); + + group = (const index_group *)( + stream->groups.leftmost); + } + } + + if (mode == LZMA_INDEX_ITER_NONEMPTY_BLOCK) { + // We need to look for the next Block again if this Block + // is empty. + if (record == 0) { + if (group->node.uncompressed_base + == group->records[0].uncompressed_sum) + goto again; + } else if (group->records[record - 1].uncompressed_sum + == group->records[record].uncompressed_sum) { + goto again; + } + } + + iter->internal[ITER_STREAM].p = stream; + iter->internal[ITER_GROUP].p = group; + iter->internal[ITER_RECORD].s = record; + + iter_set_info(iter); + + return false; +} + + +extern LZMA_API(lzma_bool) +lzma_index_iter_locate(lzma_index_iter *iter, lzma_vli target) +{ + const lzma_index *i = iter->internal[ITER_INDEX].p; + + // If the target is past the end of the file, return immediately. + if (i->uncompressed_size <= target) + return true; + + // Locate the Stream containing the target offset. + const index_stream *stream = index_tree_locate(&i->streams, target); + assert(stream != NULL); + target -= stream->node.uncompressed_base; + + // Locate the group containing the target offset. + const index_group *group = index_tree_locate(&stream->groups, target); + assert(group != NULL); + + // Use binary search to locate the exact Record. It is the first + // Record whose uncompressed_sum is greater than target. + // This is because we want the rightmost Record that fulfills the + // search criterion. It is possible that there are empty Blocks; + // we don't want to return them. + size_t left = 0; + size_t right = group->last; + + while (left < right) { + const size_t pos = left + (right - left) / 2; + if (group->records[pos].uncompressed_sum <= target) + left = pos + 1; + else + right = pos; + } + + iter->internal[ITER_STREAM].p = stream; + iter->internal[ITER_GROUP].p = group; + iter->internal[ITER_RECORD].s = left; + + iter_set_info(iter); + + return false; +} diff --git a/src/liblzma/common/index.h b/src/liblzma/common/index.h new file mode 100644 index 0000000..031efcc --- /dev/null +++ b/src/liblzma/common/index.h @@ -0,0 +1,81 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file index.h +/// \brief Handling of Index +/// \note This header file does not include common.h or lzma.h because +/// this file is needed by both liblzma internally and by the +/// tests. Including common.h will include and define many things +/// the tests do not need and prevents issues with header file +/// include order. This way, if lzma.h or common.h are not +/// included before this file it will break on every OS instead +/// of causing more subtle errors. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_INDEX_H +#define LZMA_INDEX_H + + +/// Minimum Unpadded Size +#define UNPADDED_SIZE_MIN LZMA_VLI_C(5) + +/// Maximum Unpadded Size +#define UNPADDED_SIZE_MAX (LZMA_VLI_MAX & ~LZMA_VLI_C(3)) + +/// Index Indicator based on xz specification +#define INDEX_INDICATOR 0 + + +/// Get the size of the Index Padding field. This is needed by Index encoder +/// and decoder, but applications should have no use for this. +extern uint32_t lzma_index_padding_size(const lzma_index *i); + + +/// Set for how many Records to allocate memory the next time +/// lzma_index_append() needs to allocate space for a new Record. +/// This is used only by the Index decoder. +extern void lzma_index_prealloc(lzma_index *i, lzma_vli records); + + +/// Round the variable-length integer to the next multiple of four. +static inline lzma_vli +vli_ceil4(lzma_vli vli) +{ + assert(vli <= LZMA_VLI_MAX); + return (vli + 3) & ~LZMA_VLI_C(3); +} + + +/// Calculate the size of the Index field excluding Index Padding +static inline lzma_vli +index_size_unpadded(lzma_vli count, lzma_vli index_list_size) +{ + // Index Indicator + Number of Records + List of Records + CRC32 + return 1 + lzma_vli_size(count) + index_list_size + 4; +} + + +/// Calculate the size of the Index field including Index Padding +static inline lzma_vli +index_size(lzma_vli count, lzma_vli index_list_size) +{ + return vli_ceil4(index_size_unpadded(count, index_list_size)); +} + + +/// Calculate the total size of the Stream +static inline lzma_vli +index_stream_size(lzma_vli blocks_size, + lzma_vli count, lzma_vli index_list_size) +{ + return LZMA_STREAM_HEADER_SIZE + blocks_size + + index_size(count, index_list_size) + + LZMA_STREAM_HEADER_SIZE; +} + +#endif diff --git a/src/liblzma/common/index_decoder.c b/src/liblzma/common/index_decoder.c new file mode 100644 index 0000000..8622b2f --- /dev/null +++ b/src/liblzma/common/index_decoder.c @@ -0,0 +1,355 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file index_decoder.c +/// \brief Decodes the Index field +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "index_decoder.h" +#include "check.h" + + +typedef struct { + enum { + SEQ_INDICATOR, + SEQ_COUNT, + SEQ_MEMUSAGE, + SEQ_UNPADDED, + SEQ_UNCOMPRESSED, + SEQ_PADDING_INIT, + SEQ_PADDING, + SEQ_CRC32, + } sequence; + + /// Memory usage limit + uint64_t memlimit; + + /// Target Index + lzma_index *index; + + /// Pointer give by the application, which is set after + /// successful decoding. + lzma_index **index_ptr; + + /// Number of Records left to decode. + lzma_vli count; + + /// The most recent Unpadded Size field + lzma_vli unpadded_size; + + /// The most recent Uncompressed Size field + lzma_vli uncompressed_size; + + /// Position in integers + size_t pos; + + /// CRC32 of the List of Records field + uint32_t crc32; +} lzma_index_coder; + + +static lzma_ret +index_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, + uint8_t *restrict out lzma_attribute((__unused__)), + size_t *restrict out_pos lzma_attribute((__unused__)), + size_t out_size lzma_attribute((__unused__)), + lzma_action action lzma_attribute((__unused__))) +{ + lzma_index_coder *coder = coder_ptr; + + // Similar optimization as in index_encoder.c + const size_t in_start = *in_pos; + lzma_ret ret = LZMA_OK; + + while (*in_pos < in_size) + switch (coder->sequence) { + case SEQ_INDICATOR: + // Return LZMA_DATA_ERROR instead of e.g. LZMA_PROG_ERROR or + // LZMA_FORMAT_ERROR, because a typical usage case for Index + // decoder is when parsing the Stream backwards. If seeking + // backward from the Stream Footer gives us something that + // doesn't begin with Index Indicator, the file is considered + // corrupt, not "programming error" or "unrecognized file + // format". One could argue that the application should + // verify the Index Indicator before trying to decode the + // Index, but well, I suppose it is simpler this way. + if (in[(*in_pos)++] != INDEX_INDICATOR) + return LZMA_DATA_ERROR; + + coder->sequence = SEQ_COUNT; + break; + + case SEQ_COUNT: + ret = lzma_vli_decode(&coder->count, &coder->pos, + in, in_pos, in_size); + if (ret != LZMA_STREAM_END) + goto out; + + coder->pos = 0; + coder->sequence = SEQ_MEMUSAGE; + + // Fall through + + case SEQ_MEMUSAGE: + if (lzma_index_memusage(1, coder->count) > coder->memlimit) { + ret = LZMA_MEMLIMIT_ERROR; + goto out; + } + + // Tell the Index handling code how many Records this + // Index has to allow it to allocate memory more efficiently. + lzma_index_prealloc(coder->index, coder->count); + + ret = LZMA_OK; + coder->sequence = coder->count == 0 + ? SEQ_PADDING_INIT : SEQ_UNPADDED; + break; + + case SEQ_UNPADDED: + case SEQ_UNCOMPRESSED: { + lzma_vli *size = coder->sequence == SEQ_UNPADDED + ? &coder->unpadded_size + : &coder->uncompressed_size; + + ret = lzma_vli_decode(size, &coder->pos, + in, in_pos, in_size); + if (ret != LZMA_STREAM_END) + goto out; + + ret = LZMA_OK; + coder->pos = 0; + + if (coder->sequence == SEQ_UNPADDED) { + // Validate that encoded Unpadded Size isn't too small + // or too big. + if (coder->unpadded_size < UNPADDED_SIZE_MIN + || coder->unpadded_size + > UNPADDED_SIZE_MAX) + return LZMA_DATA_ERROR; + + coder->sequence = SEQ_UNCOMPRESSED; + } else { + // Add the decoded Record to the Index. + return_if_error(lzma_index_append( + coder->index, allocator, + coder->unpadded_size, + coder->uncompressed_size)); + + // Check if this was the last Record. + coder->sequence = --coder->count == 0 + ? SEQ_PADDING_INIT + : SEQ_UNPADDED; + } + + break; + } + + case SEQ_PADDING_INIT: + coder->pos = lzma_index_padding_size(coder->index); + coder->sequence = SEQ_PADDING; + + // Fall through + + case SEQ_PADDING: + if (coder->pos > 0) { + --coder->pos; + if (in[(*in_pos)++] != 0x00) + return LZMA_DATA_ERROR; + + break; + } + + // Finish the CRC32 calculation. + coder->crc32 = lzma_crc32(in + in_start, + *in_pos - in_start, coder->crc32); + + coder->sequence = SEQ_CRC32; + + // Fall through + + case SEQ_CRC32: + do { + if (*in_pos == in_size) + return LZMA_OK; + + if (((coder->crc32 >> (coder->pos * 8)) & 0xFF) + != in[(*in_pos)++]) { +#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION + return LZMA_DATA_ERROR; +#endif + } + + } while (++coder->pos < 4); + + // Decoding was successful, now we can let the application + // see the decoded Index. + *coder->index_ptr = coder->index; + + // Make index NULL so we don't free it unintentionally. + coder->index = NULL; + + return LZMA_STREAM_END; + + default: + assert(0); + return LZMA_PROG_ERROR; + } + +out: + // Update the CRC32, + coder->crc32 = lzma_crc32(in + in_start, + *in_pos - in_start, coder->crc32); + + return ret; +} + + +static void +index_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_index_coder *coder = coder_ptr; + lzma_index_end(coder->index, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +index_decoder_memconfig(void *coder_ptr, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit) +{ + lzma_index_coder *coder = coder_ptr; + + *memusage = lzma_index_memusage(1, coder->count); + *old_memlimit = coder->memlimit; + + if (new_memlimit != 0) { + if (new_memlimit < *memusage) + return LZMA_MEMLIMIT_ERROR; + + coder->memlimit = new_memlimit; + } + + return LZMA_OK; +} + + +static lzma_ret +index_decoder_reset(lzma_index_coder *coder, const lzma_allocator *allocator, + lzma_index **i, uint64_t memlimit) +{ + // Remember the pointer given by the application. We will set it + // to point to the decoded Index only if decoding is successful. + // Before that, keep it NULL so that applications can always safely + // pass it to lzma_index_end() no matter did decoding succeed or not. + coder->index_ptr = i; + *i = NULL; + + // We always allocate a new lzma_index. + coder->index = lzma_index_init(allocator); + if (coder->index == NULL) + return LZMA_MEM_ERROR; + + // Initialize the rest. + coder->sequence = SEQ_INDICATOR; + coder->memlimit = my_max(1, memlimit); + coder->count = 0; // Needs to be initialized due to _memconfig(). + coder->pos = 0; + coder->crc32 = 0; + + return LZMA_OK; +} + + +extern lzma_ret +lzma_index_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + lzma_index **i, uint64_t memlimit) +{ + lzma_next_coder_init(&lzma_index_decoder_init, next, allocator); + + if (i == NULL) + return LZMA_PROG_ERROR; + + lzma_index_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_index_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &index_decode; + next->end = &index_decoder_end; + next->memconfig = &index_decoder_memconfig; + coder->index = NULL; + } else { + lzma_index_end(coder->index, allocator); + } + + return index_decoder_reset(coder, allocator, i, memlimit); +} + + +extern LZMA_API(lzma_ret) +lzma_index_decoder(lzma_stream *strm, lzma_index **i, uint64_t memlimit) +{ + lzma_next_strm_init(lzma_index_decoder_init, strm, i, memlimit); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_index_buffer_decode(lzma_index **i, uint64_t *memlimit, + const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size) +{ + // Sanity checks + if (i == NULL || memlimit == NULL + || in == NULL || in_pos == NULL || *in_pos > in_size) + return LZMA_PROG_ERROR; + + // Initialize the decoder. + lzma_index_coder coder; + return_if_error(index_decoder_reset(&coder, allocator, i, *memlimit)); + + // Store the input start position so that we can restore it in case + // of an error. + const size_t in_start = *in_pos; + + // Do the actual decoding. + lzma_ret ret = index_decode(&coder, allocator, in, in_pos, in_size, + NULL, NULL, 0, LZMA_RUN); + + if (ret == LZMA_STREAM_END) { + ret = LZMA_OK; + } else { + // Something went wrong, free the Index structure and restore + // the input position. + lzma_index_end(coder.index, allocator); + *in_pos = in_start; + + if (ret == LZMA_OK) { + // The input is truncated or otherwise corrupt. + // Use LZMA_DATA_ERROR instead of LZMA_BUF_ERROR + // like lzma_vli_decode() does in single-call mode. + ret = LZMA_DATA_ERROR; + + } else if (ret == LZMA_MEMLIMIT_ERROR) { + // Tell the caller how much memory would have + // been needed. + *memlimit = lzma_index_memusage(1, coder.count); + } + } + + return ret; +} diff --git a/src/liblzma/common/index_decoder.h b/src/liblzma/common/index_decoder.h new file mode 100644 index 0000000..3fec483 --- /dev/null +++ b/src/liblzma/common/index_decoder.h @@ -0,0 +1,25 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file index_decoder.h +/// \brief Decodes the Index field +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_INDEX_DECODER_H +#define LZMA_INDEX_DECODER_H + +#include "common.h" +#include "index.h" + + +extern lzma_ret lzma_index_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + lzma_index **i, uint64_t memlimit); + + +#endif diff --git a/src/liblzma/common/index_encoder.c b/src/liblzma/common/index_encoder.c new file mode 100644 index 0000000..c7cafb7 --- /dev/null +++ b/src/liblzma/common/index_encoder.c @@ -0,0 +1,256 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file index_encoder.c +/// \brief Encodes the Index field +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "index_encoder.h" +#include "index.h" +#include "check.h" + + +typedef struct { + enum { + SEQ_INDICATOR, + SEQ_COUNT, + SEQ_UNPADDED, + SEQ_UNCOMPRESSED, + SEQ_NEXT, + SEQ_PADDING, + SEQ_CRC32, + } sequence; + + /// Index being encoded + const lzma_index *index; + + /// Iterator for the Index being encoded + lzma_index_iter iter; + + /// Position in integers + size_t pos; + + /// CRC32 of the List of Records field + uint32_t crc32; +} lzma_index_coder; + + +static lzma_ret +index_encode(void *coder_ptr, + const lzma_allocator *allocator lzma_attribute((__unused__)), + const uint8_t *restrict in lzma_attribute((__unused__)), + size_t *restrict in_pos lzma_attribute((__unused__)), + size_t in_size lzma_attribute((__unused__)), + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size, + lzma_action action lzma_attribute((__unused__))) +{ + lzma_index_coder *coder = coder_ptr; + + // Position where to start calculating CRC32. The idea is that we + // need to call lzma_crc32() only once per call to index_encode(). + const size_t out_start = *out_pos; + + // Return value to use if we return at the end of this function. + // We use "goto out" to jump out of the while-switch construct + // instead of returning directly, because that way we don't need + // to copypaste the lzma_crc32() call to many places. + lzma_ret ret = LZMA_OK; + + while (*out_pos < out_size) + switch (coder->sequence) { + case SEQ_INDICATOR: + out[*out_pos] = INDEX_INDICATOR; + ++*out_pos; + coder->sequence = SEQ_COUNT; + break; + + case SEQ_COUNT: { + const lzma_vli count = lzma_index_block_count(coder->index); + ret = lzma_vli_encode(count, &coder->pos, + out, out_pos, out_size); + if (ret != LZMA_STREAM_END) + goto out; + + ret = LZMA_OK; + coder->pos = 0; + coder->sequence = SEQ_NEXT; + break; + } + + case SEQ_NEXT: + if (lzma_index_iter_next( + &coder->iter, LZMA_INDEX_ITER_BLOCK)) { + // Get the size of the Index Padding field. + coder->pos = lzma_index_padding_size(coder->index); + assert(coder->pos <= 3); + coder->sequence = SEQ_PADDING; + break; + } + + coder->sequence = SEQ_UNPADDED; + + // Fall through + + case SEQ_UNPADDED: + case SEQ_UNCOMPRESSED: { + const lzma_vli size = coder->sequence == SEQ_UNPADDED + ? coder->iter.block.unpadded_size + : coder->iter.block.uncompressed_size; + + ret = lzma_vli_encode(size, &coder->pos, + out, out_pos, out_size); + if (ret != LZMA_STREAM_END) + goto out; + + ret = LZMA_OK; + coder->pos = 0; + + // Advance to SEQ_UNCOMPRESSED or SEQ_NEXT. + ++coder->sequence; + break; + } + + case SEQ_PADDING: + if (coder->pos > 0) { + --coder->pos; + out[(*out_pos)++] = 0x00; + break; + } + + // Finish the CRC32 calculation. + coder->crc32 = lzma_crc32(out + out_start, + *out_pos - out_start, coder->crc32); + + coder->sequence = SEQ_CRC32; + + // Fall through + + case SEQ_CRC32: + // We don't use the main loop, because we don't want + // coder->crc32 to be touched anymore. + do { + if (*out_pos == out_size) + return LZMA_OK; + + out[*out_pos] = (coder->crc32 >> (coder->pos * 8)) + & 0xFF; + ++*out_pos; + + } while (++coder->pos < 4); + + return LZMA_STREAM_END; + + default: + assert(0); + return LZMA_PROG_ERROR; + } + +out: + // Update the CRC32. + coder->crc32 = lzma_crc32(out + out_start, + *out_pos - out_start, coder->crc32); + + return ret; +} + + +static void +index_encoder_end(void *coder, const lzma_allocator *allocator) +{ + lzma_free(coder, allocator); + return; +} + + +static void +index_encoder_reset(lzma_index_coder *coder, const lzma_index *i) +{ + lzma_index_iter_init(&coder->iter, i); + + coder->sequence = SEQ_INDICATOR; + coder->index = i; + coder->pos = 0; + coder->crc32 = 0; + + return; +} + + +extern lzma_ret +lzma_index_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_index *i) +{ + lzma_next_coder_init(&lzma_index_encoder_init, next, allocator); + + if (i == NULL) + return LZMA_PROG_ERROR; + + if (next->coder == NULL) { + next->coder = lzma_alloc(sizeof(lzma_index_coder), allocator); + if (next->coder == NULL) + return LZMA_MEM_ERROR; + + next->code = &index_encode; + next->end = &index_encoder_end; + } + + index_encoder_reset(next->coder, i); + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_index_encoder(lzma_stream *strm, const lzma_index *i) +{ + lzma_next_strm_init(lzma_index_encoder_init, strm, i); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_index_buffer_encode(const lzma_index *i, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // Validate the arguments. + if (i == NULL || out == NULL || out_pos == NULL || *out_pos > out_size) + return LZMA_PROG_ERROR; + + // Don't try to encode if there's not enough output space. + if (out_size - *out_pos < lzma_index_size(i)) + return LZMA_BUF_ERROR; + + // The Index encoder needs just one small data structure so we can + // allocate it on stack. + lzma_index_coder coder; + index_encoder_reset(&coder, i); + + // Do the actual encoding. This should never fail, but store + // the original *out_pos just in case. + const size_t out_start = *out_pos; + lzma_ret ret = index_encode(&coder, NULL, NULL, NULL, 0, + out, out_pos, out_size, LZMA_RUN); + + if (ret == LZMA_STREAM_END) { + ret = LZMA_OK; + } else { + // We should never get here, but just in case, restore the + // output position and set the error accordingly if something + // goes wrong and debugging isn't enabled. + assert(0); + *out_pos = out_start; + ret = LZMA_PROG_ERROR; + } + + return ret; +} diff --git a/src/liblzma/common/index_encoder.h b/src/liblzma/common/index_encoder.h new file mode 100644 index 0000000..4d55cd1 --- /dev/null +++ b/src/liblzma/common/index_encoder.h @@ -0,0 +1,23 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file index_encoder.h +/// \brief Encodes the Index field +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_INDEX_ENCODER_H +#define LZMA_INDEX_ENCODER_H + +#include "common.h" + + +extern lzma_ret lzma_index_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, const lzma_index *i); + + +#endif diff --git a/src/liblzma/common/index_hash.c b/src/liblzma/common/index_hash.c new file mode 100644 index 0000000..f55f7bc --- /dev/null +++ b/src/liblzma/common/index_hash.c @@ -0,0 +1,336 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file index_hash.c +/// \brief Validates Index by using a hash function +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "index.h" +#include "check.h" + + +typedef struct { + /// Sum of the Block sizes (including Block Padding) + lzma_vli blocks_size; + + /// Sum of the Uncompressed Size fields + lzma_vli uncompressed_size; + + /// Number of Records + lzma_vli count; + + /// Size of the List of Index Records as bytes + lzma_vli index_list_size; + + /// Check calculated from Unpadded Sizes and Uncompressed Sizes. + lzma_check_state check; + +} lzma_index_hash_info; + + +struct lzma_index_hash_s { + enum { + SEQ_BLOCK, + SEQ_COUNT, + SEQ_UNPADDED, + SEQ_UNCOMPRESSED, + SEQ_PADDING_INIT, + SEQ_PADDING, + SEQ_CRC32, + } sequence; + + /// Information collected while decoding the actual Blocks. + lzma_index_hash_info blocks; + + /// Information collected from the Index field. + lzma_index_hash_info records; + + /// Number of Records not fully decoded + lzma_vli remaining; + + /// Unpadded Size currently being read from an Index Record. + lzma_vli unpadded_size; + + /// Uncompressed Size currently being read from an Index Record. + lzma_vli uncompressed_size; + + /// Position in variable-length integers when decoding them from + /// the List of Records. + size_t pos; + + /// CRC32 of the Index + uint32_t crc32; +}; + + +extern LZMA_API(lzma_index_hash *) +lzma_index_hash_init(lzma_index_hash *index_hash, + const lzma_allocator *allocator) +{ + if (index_hash == NULL) { + index_hash = lzma_alloc(sizeof(lzma_index_hash), allocator); + if (index_hash == NULL) + return NULL; + } + + index_hash->sequence = SEQ_BLOCK; + index_hash->blocks.blocks_size = 0; + index_hash->blocks.uncompressed_size = 0; + index_hash->blocks.count = 0; + index_hash->blocks.index_list_size = 0; + index_hash->records.blocks_size = 0; + index_hash->records.uncompressed_size = 0; + index_hash->records.count = 0; + index_hash->records.index_list_size = 0; + index_hash->unpadded_size = 0; + index_hash->uncompressed_size = 0; + index_hash->pos = 0; + index_hash->crc32 = 0; + + // These cannot fail because LZMA_CHECK_BEST is known to be supported. + (void)lzma_check_init(&index_hash->blocks.check, LZMA_CHECK_BEST); + (void)lzma_check_init(&index_hash->records.check, LZMA_CHECK_BEST); + + return index_hash; +} + + +extern LZMA_API(void) +lzma_index_hash_end(lzma_index_hash *index_hash, + const lzma_allocator *allocator) +{ + lzma_free(index_hash, allocator); + return; +} + + +extern LZMA_API(lzma_vli) +lzma_index_hash_size(const lzma_index_hash *index_hash) +{ + // Get the size of the Index from ->blocks instead of ->records for + // cases where application wants to know the Index Size before + // decoding the Index. + return index_size(index_hash->blocks.count, + index_hash->blocks.index_list_size); +} + + +/// Updates the sizes and the hash without any validation. +static void +hash_append(lzma_index_hash_info *info, lzma_vli unpadded_size, + lzma_vli uncompressed_size) +{ + info->blocks_size += vli_ceil4(unpadded_size); + info->uncompressed_size += uncompressed_size; + info->index_list_size += lzma_vli_size(unpadded_size) + + lzma_vli_size(uncompressed_size); + ++info->count; + + const lzma_vli sizes[2] = { unpadded_size, uncompressed_size }; + lzma_check_update(&info->check, LZMA_CHECK_BEST, + (const uint8_t *)(sizes), sizeof(sizes)); + + return; +} + + +extern LZMA_API(lzma_ret) +lzma_index_hash_append(lzma_index_hash *index_hash, lzma_vli unpadded_size, + lzma_vli uncompressed_size) +{ + // Validate the arguments. + if (index_hash == NULL || index_hash->sequence != SEQ_BLOCK + || unpadded_size < UNPADDED_SIZE_MIN + || unpadded_size > UNPADDED_SIZE_MAX + || uncompressed_size > LZMA_VLI_MAX) + return LZMA_PROG_ERROR; + + // Update the hash. + hash_append(&index_hash->blocks, unpadded_size, uncompressed_size); + + // Validate the properties of *info are still in allowed limits. + if (index_hash->blocks.blocks_size > LZMA_VLI_MAX + || index_hash->blocks.uncompressed_size > LZMA_VLI_MAX + || index_size(index_hash->blocks.count, + index_hash->blocks.index_list_size) + > LZMA_BACKWARD_SIZE_MAX + || index_stream_size(index_hash->blocks.blocks_size, + index_hash->blocks.count, + index_hash->blocks.index_list_size) + > LZMA_VLI_MAX) + return LZMA_DATA_ERROR; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_index_hash_decode(lzma_index_hash *index_hash, const uint8_t *in, + size_t *in_pos, size_t in_size) +{ + // Catch zero input buffer here, because in contrast to Index encoder + // and decoder functions, applications call this function directly + // instead of via lzma_code(), which does the buffer checking. + if (*in_pos >= in_size) + return LZMA_BUF_ERROR; + + // NOTE: This function has many similarities to index_encode() and + // index_decode() functions found from index_encoder.c and + // index_decoder.c. See the comments especially in index_encoder.c. + const size_t in_start = *in_pos; + lzma_ret ret = LZMA_OK; + + while (*in_pos < in_size) + switch (index_hash->sequence) { + case SEQ_BLOCK: + // Check the Index Indicator is present. + if (in[(*in_pos)++] != INDEX_INDICATOR) + return LZMA_DATA_ERROR; + + index_hash->sequence = SEQ_COUNT; + break; + + case SEQ_COUNT: { + ret = lzma_vli_decode(&index_hash->remaining, + &index_hash->pos, in, in_pos, in_size); + if (ret != LZMA_STREAM_END) + goto out; + + // The count must match the count of the Blocks decoded. + if (index_hash->remaining != index_hash->blocks.count) + return LZMA_DATA_ERROR; + + ret = LZMA_OK; + index_hash->pos = 0; + + // Handle the special case when there are no Blocks. + index_hash->sequence = index_hash->remaining == 0 + ? SEQ_PADDING_INIT : SEQ_UNPADDED; + break; + } + + case SEQ_UNPADDED: + case SEQ_UNCOMPRESSED: { + lzma_vli *size = index_hash->sequence == SEQ_UNPADDED + ? &index_hash->unpadded_size + : &index_hash->uncompressed_size; + + ret = lzma_vli_decode(size, &index_hash->pos, + in, in_pos, in_size); + if (ret != LZMA_STREAM_END) + goto out; + + ret = LZMA_OK; + index_hash->pos = 0; + + if (index_hash->sequence == SEQ_UNPADDED) { + if (index_hash->unpadded_size < UNPADDED_SIZE_MIN + || index_hash->unpadded_size + > UNPADDED_SIZE_MAX) + return LZMA_DATA_ERROR; + + index_hash->sequence = SEQ_UNCOMPRESSED; + } else { + // Update the hash. + hash_append(&index_hash->records, + index_hash->unpadded_size, + index_hash->uncompressed_size); + + // Verify that we don't go over the known sizes. Note + // that this validation is simpler than the one used + // in lzma_index_hash_append(), because here we know + // that values in index_hash->blocks are already + // validated and we are fine as long as we don't + // exceed them in index_hash->records. + if (index_hash->blocks.blocks_size + < index_hash->records.blocks_size + || index_hash->blocks.uncompressed_size + < index_hash->records.uncompressed_size + || index_hash->blocks.index_list_size + < index_hash->records.index_list_size) + return LZMA_DATA_ERROR; + + // Check if this was the last Record. + index_hash->sequence = --index_hash->remaining == 0 + ? SEQ_PADDING_INIT : SEQ_UNPADDED; + } + + break; + } + + case SEQ_PADDING_INIT: + index_hash->pos = (LZMA_VLI_C(4) - index_size_unpadded( + index_hash->records.count, + index_hash->records.index_list_size)) & 3; + index_hash->sequence = SEQ_PADDING; + + // Fall through + + case SEQ_PADDING: + if (index_hash->pos > 0) { + --index_hash->pos; + if (in[(*in_pos)++] != 0x00) + return LZMA_DATA_ERROR; + + break; + } + + // Compare the sizes. + if (index_hash->blocks.blocks_size + != index_hash->records.blocks_size + || index_hash->blocks.uncompressed_size + != index_hash->records.uncompressed_size + || index_hash->blocks.index_list_size + != index_hash->records.index_list_size) + return LZMA_DATA_ERROR; + + // Finish the hashes and compare them. + lzma_check_finish(&index_hash->blocks.check, LZMA_CHECK_BEST); + lzma_check_finish(&index_hash->records.check, LZMA_CHECK_BEST); + if (memcmp(index_hash->blocks.check.buffer.u8, + index_hash->records.check.buffer.u8, + lzma_check_size(LZMA_CHECK_BEST)) != 0) + return LZMA_DATA_ERROR; + + // Finish the CRC32 calculation. + index_hash->crc32 = lzma_crc32(in + in_start, + *in_pos - in_start, index_hash->crc32); + + index_hash->sequence = SEQ_CRC32; + + // Fall through + + case SEQ_CRC32: + do { + if (*in_pos == in_size) + return LZMA_OK; + + if (((index_hash->crc32 >> (index_hash->pos * 8)) + & 0xFF) != in[(*in_pos)++]) { +#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION + return LZMA_DATA_ERROR; +#endif + } + + } while (++index_hash->pos < 4); + + return LZMA_STREAM_END; + + default: + assert(0); + return LZMA_PROG_ERROR; + } + +out: + // Update the CRC32, + index_hash->crc32 = lzma_crc32(in + in_start, + *in_pos - in_start, index_hash->crc32); + + return ret; +} diff --git a/src/liblzma/common/lzip_decoder.c b/src/liblzma/common/lzip_decoder.c new file mode 100644 index 0000000..20794f9 --- /dev/null +++ b/src/liblzma/common/lzip_decoder.c @@ -0,0 +1,414 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzip_decoder.c +/// \brief Decodes .lz (lzip) files +// +// Author: MichaÅ‚ Górny +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lzip_decoder.h" +#include "lzma_decoder.h" +#include "check.h" + + +// .lz format version 0 lacks the 64-bit Member size field in the footer. +#define LZIP_V0_FOOTER_SIZE 12 +#define LZIP_V1_FOOTER_SIZE 20 +#define LZIP_FOOTER_SIZE_MAX LZIP_V1_FOOTER_SIZE + +// lc/lp/pb are hardcoded in the .lz format. +#define LZIP_LC 3 +#define LZIP_LP 0 +#define LZIP_PB 2 + + +typedef struct { + enum { + SEQ_ID_STRING, + SEQ_VERSION, + SEQ_DICT_SIZE, + SEQ_CODER_INIT, + SEQ_LZMA_STREAM, + SEQ_MEMBER_FOOTER, + } sequence; + + /// .lz member format version + uint32_t version; + + /// CRC32 of the uncompressed data in the .lz member + uint32_t crc32; + + /// Uncompressed size of the .lz member + uint64_t uncompressed_size; + + /// Compressed size of the .lz member + uint64_t member_size; + + /// Memory usage limit + uint64_t memlimit; + + /// Amount of memory actually needed + uint64_t memusage; + + /// If true, LZMA_GET_CHECK is returned after decoding the header + /// fields. As all files use CRC32 this is redundant but it's + /// implemented anyway since the initialization functions supports + /// all other flags in addition to LZMA_TELL_ANY_CHECK. + bool tell_any_check; + + /// If true, we won't calculate or verify the CRC32 of + /// the uncompressed data. + bool ignore_check; + + /// If true, we will decode concatenated .lz members and stop if + /// non-.lz data is seen after at least one member has been + /// successfully decoded. + bool concatenated; + + /// When decoding concatenated .lz members, this is true as long as + /// we are decoding the first .lz member. This is needed to avoid + /// incorrect LZMA_FORMAT_ERROR in case there is non-.lz data at + /// the end of the file. + bool first_member; + + /// Reading position in the header and footer fields + size_t pos; + + /// Buffer to hold the .lz footer fields + uint8_t buffer[LZIP_FOOTER_SIZE_MAX]; + + /// Options decoded from the .lz header that needed to initialize + /// the LZMA1 decoder. + lzma_options_lzma options; + + /// LZMA1 decoder + lzma_next_coder lzma_decoder; + +} lzma_lzip_coder; + + +static lzma_ret +lzip_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_lzip_coder *coder = coder_ptr; + + while (true) + switch (coder->sequence) { + case SEQ_ID_STRING: { + // The "ID string" or magic bytes are "LZIP" in US-ASCII. + const uint8_t lzip_id_string[4] = { 0x4C, 0x5A, 0x49, 0x50 }; + + while (coder->pos < sizeof(lzip_id_string)) { + if (*in_pos >= in_size) { + // If we are on the 2nd+ concatenated member + // and the input ends before we can read + // the magic bytes, we discard the bytes that + // were already read (up to 3) and finish. + // See the reasoning below. + return !coder->first_member + && action == LZMA_FINISH + ? LZMA_STREAM_END : LZMA_OK; + } + + if (in[*in_pos] != lzip_id_string[coder->pos]) { + // The .lz format allows putting non-.lz data + // at the end of the file. If we have seen + // at least one valid .lz member already, + // then we won't consume the byte at *in_pos + // and will return LZMA_STREAM_END. This way + // apps can easily locate and read the non-.lz + // data after the .lz member(s). + // + // NOTE: If the first 1-3 bytes of the non-.lz + // data match the .lz ID string then the first + // 1-3 bytes of the junk will get ignored by + // us. If apps want to properly locate the + // trailing data they must ensure that the + // first byte of their custom data isn't the + // same as the first byte of .lz ID string. + // With the liblzma API we cannot rewind the + // input position across calls to lzma_code(). + return !coder->first_member + ? LZMA_STREAM_END : LZMA_FORMAT_ERROR; + } + + ++*in_pos; + ++coder->pos; + } + + coder->pos = 0; + + coder->crc32 = 0; + coder->uncompressed_size = 0; + coder->member_size = sizeof(lzip_id_string); + + coder->sequence = SEQ_VERSION; + } + + // Fall through + + case SEQ_VERSION: + if (*in_pos >= in_size) + return LZMA_OK; + + coder->version = in[(*in_pos)++]; + + // We support version 0 and unextended version 1. + if (coder->version > 1) + return LZMA_OPTIONS_ERROR; + + ++coder->member_size; + coder->sequence = SEQ_DICT_SIZE; + + // .lz versions 0 and 1 use CRC32 as the integrity check + // so if the application wanted to know that + // (LZMA_TELL_ANY_CHECK) we can tell it now. + if (coder->tell_any_check) + return LZMA_GET_CHECK; + + // Fall through + + case SEQ_DICT_SIZE: { + if (*in_pos >= in_size) + return LZMA_OK; + + const uint32_t ds = in[(*in_pos)++]; + ++coder->member_size; + + // The five lowest bits are for the base-2 logarithm of + // the dictionary size and the highest three bits are + // the fractional part (0/16 to 7/16) that will be + // substracted to get the final value. + // + // For example, with 0xB5: + // b2log = 21 + // fracnum = 5 + // dict_size = 2^21 - 2^21 * 5 / 16 = 1408 KiB + const uint32_t b2log = ds & 0x1F; + const uint32_t fracnum = ds >> 5; + + // The format versions 0 and 1 allow dictionary size in the + // range [4 KiB, 512 MiB]. + if (b2log < 12 || b2log > 29 || (b2log == 12 && fracnum > 0)) + return LZMA_DATA_ERROR; + + // 2^[b2log] - 2^[b2log] * [fracnum] / 16 + // = 2^[b2log] - [fracnum] * 2^([b2log] - 4) + coder->options.dict_size = (UINT32_C(1) << b2log) + - (fracnum << (b2log - 4)); + + assert(coder->options.dict_size >= 4096); + assert(coder->options.dict_size <= (UINT32_C(512) << 20)); + + coder->options.preset_dict = NULL; + coder->options.lc = LZIP_LC; + coder->options.lp = LZIP_LP; + coder->options.pb = LZIP_PB; + + // Calculate the memory usage. + coder->memusage = lzma_lzma_decoder_memusage(&coder->options) + + LZMA_MEMUSAGE_BASE; + + // Initialization is a separate step because if we return + // LZMA_MEMLIMIT_ERROR we need to be able to restart after + // the memlimit has been increased. + coder->sequence = SEQ_CODER_INIT; + } + + // Fall through + + case SEQ_CODER_INIT: { + if (coder->memusage > coder->memlimit) + return LZMA_MEMLIMIT_ERROR; + + const lzma_filter_info filters[2] = { + { + .id = LZMA_FILTER_LZMA1, + .init = &lzma_lzma_decoder_init, + .options = &coder->options, + }, { + .init = NULL, + } + }; + + return_if_error(lzma_next_filter_init(&coder->lzma_decoder, + allocator, filters)); + + coder->crc32 = 0; + coder->sequence = SEQ_LZMA_STREAM; + } + + // Fall through + + case SEQ_LZMA_STREAM: { + const size_t in_start = *in_pos; + const size_t out_start = *out_pos; + + const lzma_ret ret = coder->lzma_decoder.code( + coder->lzma_decoder.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, + action); + + const size_t out_used = *out_pos - out_start; + + coder->member_size += *in_pos - in_start; + coder->uncompressed_size += out_used; + + if (!coder->ignore_check) + coder->crc32 = lzma_crc32(out + out_start, out_used, + coder->crc32); + + if (ret != LZMA_STREAM_END) + return ret; + + coder->sequence = SEQ_MEMBER_FOOTER; + } + + // Fall through + + case SEQ_MEMBER_FOOTER: { + // The footer of .lz version 0 lacks the Member size field. + // This is the only difference between version 0 and + // unextended version 1 formats. + const size_t footer_size = coder->version == 0 + ? LZIP_V0_FOOTER_SIZE + : LZIP_V1_FOOTER_SIZE; + + // Copy the CRC32, Data size, and Member size fields to + // the internal buffer. + lzma_bufcpy(in, in_pos, in_size, coder->buffer, &coder->pos, + footer_size); + + // Return if we didn't get the whole footer yet. + if (coder->pos < footer_size) + return LZMA_OK; + + coder->pos = 0; + coder->member_size += footer_size; + + // Check that the footer fields match the observed data. + if (!coder->ignore_check + && coder->crc32 != read32le(&coder->buffer[0])) + return LZMA_DATA_ERROR; + + if (coder->uncompressed_size != read64le(&coder->buffer[4])) + return LZMA_DATA_ERROR; + + if (coder->version > 0) { + // .lz version 0 has no Member size field. + if (coder->member_size != read64le(&coder->buffer[12])) + return LZMA_DATA_ERROR; + } + + // Decoding is finished if we weren't requested to decode + // more than one .lz member. + if (!coder->concatenated) + return LZMA_STREAM_END; + + coder->first_member = false; + coder->sequence = SEQ_ID_STRING; + break; + } + + default: + assert(0); + return LZMA_PROG_ERROR; + } + + // Never reached +} + + +static void +lzip_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_lzip_coder *coder = coder_ptr; + lzma_next_end(&coder->lzma_decoder, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_check +lzip_decoder_get_check(const void *coder_ptr lzma_attribute((__unused__))) +{ + return LZMA_CHECK_CRC32; +} + + +static lzma_ret +lzip_decoder_memconfig(void *coder_ptr, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit) +{ + lzma_lzip_coder *coder = coder_ptr; + + *memusage = coder->memusage; + *old_memlimit = coder->memlimit; + + if (new_memlimit != 0) { + if (new_memlimit < coder->memusage) + return LZMA_MEMLIMIT_ERROR; + + coder->memlimit = new_memlimit; + } + + return LZMA_OK; +} + + +extern lzma_ret +lzma_lzip_decoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t memlimit, uint32_t flags) +{ + lzma_next_coder_init(&lzma_lzip_decoder_init, next, allocator); + + if (flags & ~LZMA_SUPPORTED_FLAGS) + return LZMA_OPTIONS_ERROR; + + lzma_lzip_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_lzip_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &lzip_decode; + next->end = &lzip_decoder_end; + next->get_check = &lzip_decoder_get_check; + next->memconfig = &lzip_decoder_memconfig; + + coder->lzma_decoder = LZMA_NEXT_CODER_INIT; + } + + coder->sequence = SEQ_ID_STRING; + coder->memlimit = my_max(1, memlimit); + coder->memusage = LZMA_MEMUSAGE_BASE; + coder->tell_any_check = (flags & LZMA_TELL_ANY_CHECK) != 0; + coder->ignore_check = (flags & LZMA_IGNORE_CHECK) != 0; + coder->concatenated = (flags & LZMA_CONCATENATED) != 0; + coder->first_member = true; + coder->pos = 0; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_lzip_decoder(lzma_stream *strm, uint64_t memlimit, uint32_t flags) +{ + lzma_next_strm_init(lzma_lzip_decoder_init, strm, memlimit, flags); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/lzip_decoder.h b/src/liblzma/common/lzip_decoder.h new file mode 100644 index 0000000..33a01c3 --- /dev/null +++ b/src/liblzma/common/lzip_decoder.h @@ -0,0 +1,22 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzip_decoder.h +/// \brief Decodes .lz (lzip) files +// +// Author: MichaÅ‚ Górny +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZIP_DECODER_H +#define LZMA_LZIP_DECODER_H + +#include "common.h" + +extern lzma_ret lzma_lzip_decoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t memlimit, uint32_t flags); + +#endif diff --git a/src/liblzma/common/memcmplen.h b/src/liblzma/common/memcmplen.h new file mode 100644 index 0000000..5a481a0 --- /dev/null +++ b/src/liblzma/common/memcmplen.h @@ -0,0 +1,160 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file memcmplen.h +/// \brief Optimized comparison of two buffers +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_MEMCMPLEN_H +#define LZMA_MEMCMPLEN_H + +#include "common.h" + +#ifdef HAVE_IMMINTRIN_H +# include +#endif + + +/// Find out how many equal bytes the two buffers have. +/// +/// \param buf1 First buffer +/// \param buf2 Second buffer +/// \param len How many bytes have already been compared and will +/// be assumed to match +/// \param limit How many bytes to compare at most, including the +/// already-compared bytes. This must be significantly +/// smaller than UINT32_MAX to avoid integer overflows. +/// Up to LZMA_MEMCMPLEN_EXTRA bytes may be read past +/// the specified limit from both buf1 and buf2. +/// +/// \return Number of equal bytes in the buffers is returned. +/// This is always at least len and at most limit. +/// +/// \note LZMA_MEMCMPLEN_EXTRA defines how many extra bytes may be read. +/// It's rounded up to 2^n. This extra amount needs to be +/// allocated in the buffers being used. It needs to be +/// initialized too to keep Valgrind quiet. +static inline uint32_t lzma_attribute((__always_inline__)) +lzma_memcmplen(const uint8_t *buf1, const uint8_t *buf2, + uint32_t len, uint32_t limit) +{ + assert(len <= limit); + assert(limit <= UINT32_MAX / 2); + +#if defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && ((TUKLIB_GNUC_REQ(3, 4) && defined(__x86_64__)) \ + || (defined(__INTEL_COMPILER) && defined(__x86_64__)) \ + || (defined(__INTEL_COMPILER) && defined(_M_X64)) \ + || (defined(_MSC_VER) && defined(_M_X64))) + // I keep this x86-64 only for now since that's where I know this + // to be a good method. This may be fine on other 64-bit CPUs too. + // On big endian one should use xor instead of subtraction and switch + // to __builtin_clzll(). +#define LZMA_MEMCMPLEN_EXTRA 8 + while (len < limit) { + const uint64_t x = read64ne(buf1 + len) - read64ne(buf2 + len); + if (x != 0) { +# if defined(_M_X64) // MSVC or Intel C compiler on Windows + unsigned long tmp; + _BitScanForward64(&tmp, x); + len += (uint32_t)tmp >> 3; +# else // GCC, clang, or Intel C compiler + len += (uint32_t)__builtin_ctzll(x) >> 3; +# endif + return my_min(len, limit); + } + + len += 8; + } + + return limit; + +#elif defined(TUKLIB_FAST_UNALIGNED_ACCESS) \ + && defined(HAVE__MM_MOVEMASK_EPI8) \ + && (defined(__SSE2__) \ + || (defined(_MSC_VER) && defined(_M_IX86_FP) \ + && _M_IX86_FP >= 2)) + // NOTE: This will use 128-bit unaligned access which + // TUKLIB_FAST_UNALIGNED_ACCESS wasn't meant to permit, + // but it's convenient here since this is x86-only. + // + // SSE2 version for 32-bit and 64-bit x86. On x86-64 the above + // version is sometimes significantly faster and sometimes + // slightly slower than this SSE2 version, so this SSE2 + // version isn't used on x86-64. +# define LZMA_MEMCMPLEN_EXTRA 16 + while (len < limit) { + const uint32_t x = 0xFFFF ^ _mm_movemask_epi8(_mm_cmpeq_epi8( + _mm_loadu_si128((const __m128i *)(buf1 + len)), + _mm_loadu_si128((const __m128i *)(buf2 + len)))); + + if (x != 0) { + len += ctz32(x); + return my_min(len, limit); + } + + len += 16; + } + + return limit; + +#elif defined(TUKLIB_FAST_UNALIGNED_ACCESS) && !defined(WORDS_BIGENDIAN) + // Generic 32-bit little endian method +# define LZMA_MEMCMPLEN_EXTRA 4 + while (len < limit) { + uint32_t x = read32ne(buf1 + len) - read32ne(buf2 + len); + if (x != 0) { + if ((x & 0xFFFF) == 0) { + len += 2; + x >>= 16; + } + + if ((x & 0xFF) == 0) + ++len; + + return my_min(len, limit); + } + + len += 4; + } + + return limit; + +#elif defined(TUKLIB_FAST_UNALIGNED_ACCESS) && defined(WORDS_BIGENDIAN) + // Generic 32-bit big endian method +# define LZMA_MEMCMPLEN_EXTRA 4 + while (len < limit) { + uint32_t x = read32ne(buf1 + len) ^ read32ne(buf2 + len); + if (x != 0) { + if ((x & 0xFFFF0000) == 0) { + len += 2; + x <<= 16; + } + + if ((x & 0xFF000000) == 0) + ++len; + + return my_min(len, limit); + } + + len += 4; + } + + return limit; + +#else + // Simple portable version that doesn't use unaligned access. +# define LZMA_MEMCMPLEN_EXTRA 0 + while (len < limit && buf1[len] == buf2[len]) + ++len; + + return len; +#endif +} + +#endif diff --git a/src/liblzma/common/microlzma_decoder.c b/src/liblzma/common/microlzma_decoder.c new file mode 100644 index 0000000..e473373 --- /dev/null +++ b/src/liblzma/common/microlzma_decoder.c @@ -0,0 +1,221 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file microlzma_decoder.c +/// \brief Decode MicroLZMA format +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lzma_decoder.h" +#include "lz_decoder.h" + + +typedef struct { + /// LZMA1 decoder + lzma_next_coder lzma; + + /// Compressed size of the stream as given by the application. + /// This must be exactly correct. + /// + /// This will be decremented when input is read. + uint64_t comp_size; + + /// Uncompressed size of the stream as given by the application. + /// This may be less than the actual uncompressed size if + /// uncomp_size_is_exact is false. + /// + /// This will be decremented when output is produced. + lzma_vli uncomp_size; + + /// LZMA dictionary size as given by the application + uint32_t dict_size; + + /// If true, the exact uncompressed size is known. If false, + /// uncomp_size may be smaller than the real uncompressed size; + /// uncomp_size may never be bigger than the real uncompressed size. + bool uncomp_size_is_exact; + + /// True once the first byte of the MicroLZMA stream + /// has been processed. + bool props_decoded; +} lzma_microlzma_coder; + + +static lzma_ret +microlzma_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_microlzma_coder *coder = coder_ptr; + + // Remember the in start position so that we can update comp_size. + const size_t in_start = *in_pos; + + // Remember the out start position so that we can update uncomp_size. + const size_t out_start = *out_pos; + + // Limit the amount of input so that the decoder won't read more than + // comp_size. This is required when uncomp_size isn't exact because + // in that case the LZMA decoder will try to decode more input even + // when it has no output space (it can be looking for EOPM). + if (in_size - *in_pos > coder->comp_size) + in_size = *in_pos + (size_t)(coder->comp_size); + + // When the exact uncompressed size isn't known, we must limit + // the available output space to prevent the LZMA decoder from + // trying to decode too much. + if (!coder->uncomp_size_is_exact + && out_size - *out_pos > coder->uncomp_size) + out_size = *out_pos + (size_t)(coder->uncomp_size); + + if (!coder->props_decoded) { + // There must be at least one byte of input to decode + // the properties byte. + if (*in_pos >= in_size) + return LZMA_OK; + + lzma_options_lzma options = { + .dict_size = coder->dict_size, + .preset_dict = NULL, + .preset_dict_size = 0, + .ext_flags = 0, // EOPM not allowed when size is known + .ext_size_low = UINT32_MAX, // Unknown size by default + .ext_size_high = UINT32_MAX, + }; + + if (coder->uncomp_size_is_exact) + lzma_set_ext_size(options, coder->uncomp_size); + + // The properties are stored as bitwise-negation + // of the typical encoding. + if (lzma_lzma_lclppb_decode(&options, ~in[*in_pos])) + return LZMA_OPTIONS_ERROR; + + ++*in_pos; + + // Initialize the decoder. + lzma_filter_info filters[2] = { + { + .id = LZMA_FILTER_LZMA1EXT, + .init = &lzma_lzma_decoder_init, + .options = &options, + }, { + .init = NULL, + } + }; + + return_if_error(lzma_next_filter_init(&coder->lzma, + allocator, filters)); + + // Pass one dummy 0x00 byte to the LZMA decoder since that + // is what it expects the first byte to be. + const uint8_t dummy_in = 0; + size_t dummy_in_pos = 0; + if (coder->lzma.code(coder->lzma.coder, allocator, + &dummy_in, &dummy_in_pos, 1, + out, out_pos, out_size, LZMA_RUN) != LZMA_OK) + return LZMA_PROG_ERROR; + + assert(dummy_in_pos == 1); + coder->props_decoded = true; + } + + // The rest is normal LZMA decoding. + lzma_ret ret = coder->lzma.code(coder->lzma.coder, allocator, + in, in_pos, in_size, + out, out_pos, out_size, action); + + // Update the remaining compressed size. + assert(coder->comp_size >= *in_pos - in_start); + coder->comp_size -= *in_pos - in_start; + + if (coder->uncomp_size_is_exact) { + // After successful decompression of the complete stream + // the compressed size must match. + if (ret == LZMA_STREAM_END && coder->comp_size != 0) + ret = LZMA_DATA_ERROR; + } else { + // Update the amount of output remaining. + assert(coder->uncomp_size >= *out_pos - out_start); + coder->uncomp_size -= *out_pos - out_start; + + // - We must not get LZMA_STREAM_END because the stream + // shouldn't have EOPM. + // - We must use uncomp_size to determine when to + // return LZMA_STREAM_END. + if (ret == LZMA_STREAM_END) + ret = LZMA_DATA_ERROR; + else if (coder->uncomp_size == 0) + ret = LZMA_STREAM_END; + } + + return ret; +} + + +static void +microlzma_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_microlzma_coder *coder = coder_ptr; + lzma_next_end(&coder->lzma, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +microlzma_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t comp_size, + uint64_t uncomp_size, bool uncomp_size_is_exact, + uint32_t dict_size) +{ + lzma_next_coder_init(µlzma_decoder_init, next, allocator); + + lzma_microlzma_coder *coder = next->coder; + + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_microlzma_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = µlzma_decode; + next->end = µlzma_decoder_end; + + coder->lzma = LZMA_NEXT_CODER_INIT; + } + + // The public API is uint64_t but the internal LZ decoder API uses + // lzma_vli. + if (uncomp_size > LZMA_VLI_MAX) + return LZMA_OPTIONS_ERROR; + + coder->comp_size = comp_size; + coder->uncomp_size = uncomp_size; + coder->uncomp_size_is_exact = uncomp_size_is_exact; + coder->dict_size = dict_size; + + coder->props_decoded = false; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_microlzma_decoder(lzma_stream *strm, uint64_t comp_size, + uint64_t uncomp_size, lzma_bool uncomp_size_is_exact, + uint32_t dict_size) +{ + lzma_next_strm_init(microlzma_decoder_init, strm, comp_size, + uncomp_size, uncomp_size_is_exact, dict_size); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/microlzma_encoder.c b/src/liblzma/common/microlzma_encoder.c new file mode 100644 index 0000000..a787ca2 --- /dev/null +++ b/src/liblzma/common/microlzma_encoder.c @@ -0,0 +1,141 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file microlzma_encoder.c +/// \brief Encode into MicroLZMA format +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lzma_encoder.h" + + +typedef struct { + /// LZMA1 encoder + lzma_next_coder lzma; + + /// LZMA properties byte (lc/lp/pb) + uint8_t props; +} lzma_microlzma_coder; + + +static lzma_ret +microlzma_encode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_microlzma_coder *coder = coder_ptr; + + // Remember *out_pos so that we can overwrite the first byte with + // the LZMA properties byte. + const size_t out_start = *out_pos; + + // Remember *in_pos so that we can set it based on how many + // uncompressed bytes were actually encoded. + const size_t in_start = *in_pos; + + // Set the output size limit based on the available output space. + // We know that the encoder supports set_out_limit() so + // LZMA_OPTIONS_ERROR isn't possible. LZMA_BUF_ERROR is possible + // but lzma_code() has an assertion to not allow it to be returned + // from here and I don't want to change that for now, so + // LZMA_BUF_ERROR becomes LZMA_PROG_ERROR. + uint64_t uncomp_size; + if (coder->lzma.set_out_limit(coder->lzma.coder, + &uncomp_size, out_size - *out_pos) != LZMA_OK) + return LZMA_PROG_ERROR; + + // set_out_limit fails if this isn't true. + assert(out_size - *out_pos >= 6); + + // Encode as much as possible. + const lzma_ret ret = coder->lzma.code(coder->lzma.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, action); + + if (ret != LZMA_STREAM_END) { + if (ret == LZMA_OK) { + assert(0); + return LZMA_PROG_ERROR; + } + + return ret; + } + + // The first output byte is bitwise-negation of the properties byte. + // We know that there is space for this byte because set_out_limit + // and the actual encoding succeeded. + out[out_start] = (uint8_t)(~coder->props); + + // The LZMA encoder likely read more input than it was able to encode. + // Set *in_pos based on uncomp_size. + assert(uncomp_size <= in_size - in_start); + *in_pos = in_start + (size_t)(uncomp_size); + + return ret; +} + + +static void +microlzma_encoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_microlzma_coder *coder = coder_ptr; + lzma_next_end(&coder->lzma, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +microlzma_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_options_lzma *options) +{ + lzma_next_coder_init(µlzma_encoder_init, next, allocator); + + lzma_microlzma_coder *coder = next->coder; + + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_microlzma_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = µlzma_encode; + next->end = µlzma_encoder_end; + + coder->lzma = LZMA_NEXT_CODER_INIT; + } + + // Encode the properties byte. Bitwise-negation of it will be the + // first output byte. + if (lzma_lzma_lclppb_encode(options, &coder->props)) + return LZMA_OPTIONS_ERROR; + + // Initialize the LZMA encoder. + const lzma_filter_info filters[2] = { + { + .id = LZMA_FILTER_LZMA1, + .init = &lzma_lzma_encoder_init, + .options = (void *)(options), + }, { + .init = NULL, + } + }; + + return lzma_next_filter_init(&coder->lzma, allocator, filters); +} + + +extern LZMA_API(lzma_ret) +lzma_microlzma_encoder(lzma_stream *strm, const lzma_options_lzma *options) +{ + lzma_next_strm_init(microlzma_encoder_init, strm, options); + + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; + +} diff --git a/src/liblzma/common/outqueue.c b/src/liblzma/common/outqueue.c new file mode 100644 index 0000000..71e8648 --- /dev/null +++ b/src/liblzma/common/outqueue.c @@ -0,0 +1,287 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file outqueue.c +/// \brief Output queue handling in multithreaded coding +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "outqueue.h" + + +/// Get the maximum number of buffers that may be allocated based +/// on the number of threads. For now this is twice the number of threads. +/// It's a compromise between RAM usage and keeping the worker threads busy +/// when buffers finish out of order. +#define GET_BUFS_LIMIT(threads) (2 * (threads)) + + +extern uint64_t +lzma_outq_memusage(uint64_t buf_size_max, uint32_t threads) +{ + // This is to ease integer overflow checking: We may allocate up to + // GET_BUFS_LIMIT(LZMA_THREADS_MAX) buffers and we need some extra + // memory for other data structures too (that's the /2). + // + // lzma_outq_prealloc_buf() will still accept bigger buffers than this. + const uint64_t limit + = UINT64_MAX / GET_BUFS_LIMIT(LZMA_THREADS_MAX) / 2; + + if (threads > LZMA_THREADS_MAX || buf_size_max > limit) + return UINT64_MAX; + + return GET_BUFS_LIMIT(threads) + * lzma_outq_outbuf_memusage(buf_size_max); +} + + +static void +move_head_to_cache(lzma_outq *outq, const lzma_allocator *allocator) +{ + assert(outq->head != NULL); + assert(outq->tail != NULL); + assert(outq->bufs_in_use > 0); + + lzma_outbuf *buf = outq->head; + outq->head = buf->next; + if (outq->head == NULL) + outq->tail = NULL; + + if (outq->cache != NULL && outq->cache->allocated != buf->allocated) + lzma_outq_clear_cache(outq, allocator); + + buf->next = outq->cache; + outq->cache = buf; + + --outq->bufs_in_use; + outq->mem_in_use -= lzma_outq_outbuf_memusage(buf->allocated); + + return; +} + + +static void +free_one_cached_buffer(lzma_outq *outq, const lzma_allocator *allocator) +{ + assert(outq->cache != NULL); + + lzma_outbuf *buf = outq->cache; + outq->cache = buf->next; + + --outq->bufs_allocated; + outq->mem_allocated -= lzma_outq_outbuf_memusage(buf->allocated); + + lzma_free(buf, allocator); + return; +} + + +extern void +lzma_outq_clear_cache(lzma_outq *outq, const lzma_allocator *allocator) +{ + while (outq->cache != NULL) + free_one_cached_buffer(outq, allocator); + + return; +} + + +extern void +lzma_outq_clear_cache2(lzma_outq *outq, const lzma_allocator *allocator, + size_t keep_size) +{ + if (outq->cache == NULL) + return; + + // Free all but one. + while (outq->cache->next != NULL) + free_one_cached_buffer(outq, allocator); + + // Free the last one only if its size doesn't equal to keep_size. + if (outq->cache->allocated != keep_size) + free_one_cached_buffer(outq, allocator); + + return; +} + + +extern lzma_ret +lzma_outq_init(lzma_outq *outq, const lzma_allocator *allocator, + uint32_t threads) +{ + if (threads > LZMA_THREADS_MAX) + return LZMA_OPTIONS_ERROR; + + const uint32_t bufs_limit = GET_BUFS_LIMIT(threads); + + // Clear head/tail. + while (outq->head != NULL) + move_head_to_cache(outq, allocator); + + // If new buf_limit is lower than the old one, we may need to free + // a few cached buffers. + while (bufs_limit < outq->bufs_allocated) + free_one_cached_buffer(outq, allocator); + + outq->bufs_limit = bufs_limit; + outq->read_pos = 0; + + return LZMA_OK; +} + + +extern void +lzma_outq_end(lzma_outq *outq, const lzma_allocator *allocator) +{ + while (outq->head != NULL) + move_head_to_cache(outq, allocator); + + lzma_outq_clear_cache(outq, allocator); + return; +} + + +extern lzma_ret +lzma_outq_prealloc_buf(lzma_outq *outq, const lzma_allocator *allocator, + size_t size) +{ + // Caller must have checked it with lzma_outq_has_buf(). + assert(outq->bufs_in_use < outq->bufs_limit); + + // If there already is appropriately-sized buffer in the cache, + // we need to do nothing. + if (outq->cache != NULL && outq->cache->allocated == size) + return LZMA_OK; + + if (size > SIZE_MAX - sizeof(lzma_outbuf)) + return LZMA_MEM_ERROR; + + const size_t alloc_size = lzma_outq_outbuf_memusage(size); + + // The cache may have buffers but their size is wrong. + lzma_outq_clear_cache(outq, allocator); + + outq->cache = lzma_alloc(alloc_size, allocator); + if (outq->cache == NULL) + return LZMA_MEM_ERROR; + + outq->cache->next = NULL; + outq->cache->allocated = size; + + ++outq->bufs_allocated; + outq->mem_allocated += alloc_size; + + return LZMA_OK; +} + + +extern lzma_outbuf * +lzma_outq_get_buf(lzma_outq *outq, void *worker) +{ + // Caller must have used lzma_outq_prealloc_buf() to ensure these. + assert(outq->bufs_in_use < outq->bufs_limit); + assert(outq->bufs_in_use < outq->bufs_allocated); + assert(outq->cache != NULL); + + lzma_outbuf *buf = outq->cache; + outq->cache = buf->next; + buf->next = NULL; + + if (outq->tail != NULL) { + assert(outq->head != NULL); + outq->tail->next = buf; + } else { + assert(outq->head == NULL); + outq->head = buf; + } + + outq->tail = buf; + + buf->worker = worker; + buf->finished = false; + buf->finish_ret = LZMA_STREAM_END; + buf->pos = 0; + buf->decoder_in_pos = 0; + + buf->unpadded_size = 0; + buf->uncompressed_size = 0; + + ++outq->bufs_in_use; + outq->mem_in_use += lzma_outq_outbuf_memusage(buf->allocated); + + return buf; +} + + +extern bool +lzma_outq_is_readable(const lzma_outq *outq) +{ + if (outq->head == NULL) + return false; + + return outq->read_pos < outq->head->pos || outq->head->finished; +} + + +extern lzma_ret +lzma_outq_read(lzma_outq *restrict outq, + const lzma_allocator *restrict allocator, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size, + lzma_vli *restrict unpadded_size, + lzma_vli *restrict uncompressed_size) +{ + // There must be at least one buffer from which to read. + if (outq->bufs_in_use == 0) + return LZMA_OK; + + // Get the buffer. + lzma_outbuf *buf = outq->head; + + // Copy from the buffer to output. + // + // FIXME? In threaded decoder it may be bad to do this copy while + // the mutex is being held. + lzma_bufcpy(buf->buf, &outq->read_pos, buf->pos, + out, out_pos, out_size); + + // Return if we didn't get all the data from the buffer. + if (!buf->finished || outq->read_pos < buf->pos) + return LZMA_OK; + + // The buffer was finished. Tell the caller its size information. + if (unpadded_size != NULL) + *unpadded_size = buf->unpadded_size; + + if (uncompressed_size != NULL) + *uncompressed_size = buf->uncompressed_size; + + // Remember the return value. + const lzma_ret finish_ret = buf->finish_ret; + + // Free this buffer for further use. + move_head_to_cache(outq, allocator); + outq->read_pos = 0; + + return finish_ret; +} + + +extern void +lzma_outq_enable_partial_output(lzma_outq *outq, + void (*enable_partial_output)(void *worker)) +{ + if (outq->head != NULL && !outq->head->finished + && outq->head->worker != NULL) { + enable_partial_output(outq->head->worker); + + // Set it to NULL since calling it twice is pointless. + outq->head->worker = NULL; + } + + return; +} diff --git a/src/liblzma/common/outqueue.h b/src/liblzma/common/outqueue.h new file mode 100644 index 0000000..596911e --- /dev/null +++ b/src/liblzma/common/outqueue.h @@ -0,0 +1,254 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file outqueue.h +/// \brief Output queue handling in multithreaded coding +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +/// Output buffer for a single thread +typedef struct lzma_outbuf_s lzma_outbuf; +struct lzma_outbuf_s { + /// Pointer to the next buffer. This is used for the cached buffers. + /// The worker thread must not modify this. + lzma_outbuf *next; + + /// This initialized by lzma_outq_get_buf() and + /// is used by lzma_outq_enable_partial_output(). + /// The worker thread must not modify this. + void *worker; + + /// Amount of memory allocated for buf[]. + /// The worker thread must not modify this. + size_t allocated; + + /// Writing position in the worker thread or, in other words, the + /// amount of finished data written to buf[] which can be copied out + /// + /// \note This is read by another thread and thus access + /// to this variable needs a mutex. + size_t pos; + + /// Decompression: Position in the input buffer in the worker thread + /// that matches the output "pos" above. This is used to detect if + /// more output might be possible from the worker thread: if it has + /// consumed all its input, then more output isn't possible. + /// + /// \note This is read by another thread and thus access + /// to this variable needs a mutex. + size_t decoder_in_pos; + + /// True when no more data will be written into this buffer. + /// + /// \note This is read by another thread and thus access + /// to this variable needs a mutex. + bool finished; + + /// Return value for lzma_outq_read() when the last byte from + /// a finished buffer has been read. Defaults to LZMA_STREAM_END. + /// This must *not* be LZMA_OK. The idea is to allow a decoder to + /// pass an error code to the main thread, setting the code here + /// together with finished = true. + lzma_ret finish_ret; + + /// Additional size information. lzma_outq_read() may read these + /// when "finished" is true. + lzma_vli unpadded_size; + lzma_vli uncompressed_size; + + /// Buffer of "allocated" bytes + uint8_t buf[]; +}; + + +typedef struct { + /// Linked list of buffers in use. The next output byte will be + /// read from the head and buffers for the next thread will be + /// appended to the tail. tail->next is always NULL. + lzma_outbuf *head; + lzma_outbuf *tail; + + /// Number of bytes read from head->buf[] in lzma_outq_read() + size_t read_pos; + + /// Linked list of allocated buffers that aren't currently used. + /// This way buffers of similar size can be reused and don't + /// need to be reallocated every time. For simplicity, all + /// cached buffers in the list have the same allocated size. + lzma_outbuf *cache; + + /// Total amount of memory allocated for buffers + uint64_t mem_allocated; + + /// Amount of memory used by the buffers that are in use in + /// the head...tail linked list. + uint64_t mem_in_use; + + /// Number of buffers in use in the head...tail list. If and only if + /// this is zero, the pointers head and tail above are NULL. + uint32_t bufs_in_use; + + /// Number of buffers allocated (in use + cached) + uint32_t bufs_allocated; + + /// Maximum allowed number of allocated buffers + uint32_t bufs_limit; +} lzma_outq; + + +/** + * \brief Calculate the memory usage of an output queue + * + * \return Approximate memory usage in bytes or UINT64_MAX on error. + */ +extern uint64_t lzma_outq_memusage(uint64_t buf_size_max, uint32_t threads); + + +/// \brief Initialize an output queue +/// +/// \param outq Pointer to an output queue. Before calling +/// this function the first time, *outq should +/// have been zeroed with memzero() so that this +/// function knows that there are no previous +/// allocations to free. +/// \param allocator Pointer to allocator or NULL +/// \param threads Number of buffers that may be in use +/// concurrently. Note that more than this number +/// of buffers may actually get allocated to +/// improve performance when buffers finish +/// out of order. The actual maximum number of +/// allocated buffers is derived from the number +/// of threads. +/// +/// \return - LZMA_OK +/// - LZMA_MEM_ERROR +/// +extern lzma_ret lzma_outq_init(lzma_outq *outq, + const lzma_allocator *allocator, uint32_t threads); + + +/// \brief Free the memory associated with the output queue +extern void lzma_outq_end(lzma_outq *outq, const lzma_allocator *allocator); + + +/// \brief Free all cached buffers that consume memory but aren't in use +extern void lzma_outq_clear_cache( + lzma_outq *outq, const lzma_allocator *allocator); + + +/// \brief Like lzma_outq_clear_cache() but might keep one buffer +/// +/// One buffer is not freed if its size is equal to keep_size. +/// This is useful if the caller knows that it will soon need a buffer of +/// keep_size bytes. This way it won't be freed and immediately reallocated. +extern void lzma_outq_clear_cache2( + lzma_outq *outq, const lzma_allocator *allocator, + size_t keep_size); + + +/// \brief Preallocate a new buffer into cache +/// +/// Splitting the buffer allocation into a separate function makes it +/// possible to ensure that way lzma_outq_get_buf() cannot fail. +/// If the preallocated buffer isn't actually used (for example, some +/// other error occurs), the caller has to do nothing as the buffer will +/// be used later or cleared from the cache when not needed. +/// +/// \return LZMA_OK on success, LZMA_MEM_ERROR if allocation fails +/// +extern lzma_ret lzma_outq_prealloc_buf( + lzma_outq *outq, const lzma_allocator *allocator, size_t size); + + +/// \brief Get a new buffer +/// +/// lzma_outq_prealloc_buf() must be used to ensure that there is a buffer +/// available before calling lzma_outq_get_buf(). +/// +extern lzma_outbuf *lzma_outq_get_buf(lzma_outq *outq, void *worker); + + +/// \brief Test if there is data ready to be read +/// +/// Call to this function must be protected with the same mutex that +/// is used to protect lzma_outbuf.finished. +/// +extern bool lzma_outq_is_readable(const lzma_outq *outq); + + +/// \brief Read finished data +/// +/// \param outq Pointer to an output queue +/// \param out Beginning of the output buffer +/// \param out_pos The next byte will be written to +/// out[*out_pos]. +/// \param out_size Size of the out buffer; the first byte into +/// which no data is written to is out[out_size]. +/// \param unpadded_size Unpadded Size from the Block encoder +/// \param uncompressed_size Uncompressed Size from the Block encoder +/// +/// \return - LZMA: All OK. Either no data was available or the buffer +/// being read didn't become empty yet. +/// - LZMA_STREAM_END: The buffer being read was finished. +/// *unpadded_size and *uncompressed_size were set if they +/// were not NULL. +/// +/// \note This reads lzma_outbuf.finished and .pos variables and thus +/// calls to this function need to be protected with a mutex. +/// +extern lzma_ret lzma_outq_read(lzma_outq *restrict outq, + const lzma_allocator *restrict allocator, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size, lzma_vli *restrict unpadded_size, + lzma_vli *restrict uncompressed_size); + + +/// \brief Enable partial output from a worker thread +/// +/// If the buffer at the head of the output queue isn't finished, +/// this will call enable_partial_output on the worker associated with +/// that output buffer. +/// +/// \note This reads a lzma_outbuf.finished variable and thus +/// calls to this function need to be protected with a mutex. +/// +extern void lzma_outq_enable_partial_output(lzma_outq *outq, + void (*enable_partial_output)(void *worker)); + + +/// \brief Test if there is at least one buffer free +/// +/// This must be used before getting a new buffer with lzma_outq_get_buf(). +/// +static inline bool +lzma_outq_has_buf(const lzma_outq *outq) +{ + return outq->bufs_in_use < outq->bufs_limit; +} + + +/// \brief Test if the queue is completely empty +static inline bool +lzma_outq_is_empty(const lzma_outq *outq) +{ + return outq->bufs_in_use == 0; +} + + +/// \brief Get the amount of memory needed for a single lzma_outbuf +/// +/// \note Caller must check that the argument is significantly less +/// than SIZE_MAX to avoid an integer overflow! +static inline uint64_t +lzma_outq_outbuf_memusage(size_t buf_size) +{ + assert(buf_size <= SIZE_MAX - sizeof(lzma_outbuf)); + return sizeof(lzma_outbuf) + buf_size; +} diff --git a/src/liblzma/common/stream_buffer_decoder.c b/src/liblzma/common/stream_buffer_decoder.c new file mode 100644 index 0000000..b9745b5 --- /dev/null +++ b/src/liblzma/common/stream_buffer_decoder.c @@ -0,0 +1,91 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_buffer_decoder.c +/// \brief Single-call .xz Stream decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "stream_decoder.h" + + +extern LZMA_API(lzma_ret) +lzma_stream_buffer_decode(uint64_t *memlimit, uint32_t flags, + const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + // Sanity checks + if (in_pos == NULL || (in == NULL && *in_pos != in_size) + || *in_pos > in_size || out_pos == NULL + || (out == NULL && *out_pos != out_size) + || *out_pos > out_size) + return LZMA_PROG_ERROR; + + // Catch flags that are not allowed in buffer-to-buffer decoding. + if (flags & LZMA_TELL_ANY_CHECK) + return LZMA_PROG_ERROR; + + // Initialize the Stream decoder. + // TODO: We need something to tell the decoder that it can use the + // output buffer as workspace, and thus save significant amount of RAM. + lzma_next_coder stream_decoder = LZMA_NEXT_CODER_INIT; + lzma_ret ret = lzma_stream_decoder_init( + &stream_decoder, allocator, *memlimit, flags); + + if (ret == LZMA_OK) { + // Save the positions so that we can restore them in case + // an error occurs. + const size_t in_start = *in_pos; + const size_t out_start = *out_pos; + + // Do the actual decoding. + ret = stream_decoder.code(stream_decoder.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, + LZMA_FINISH); + + if (ret == LZMA_STREAM_END) { + ret = LZMA_OK; + } else { + // Something went wrong, restore the positions. + *in_pos = in_start; + *out_pos = out_start; + + if (ret == LZMA_OK) { + // Either the input was truncated or the + // output buffer was too small. + assert(*in_pos == in_size + || *out_pos == out_size); + + // If all the input was consumed, then the + // input is truncated, even if the output + // buffer is also full. This is because + // processing the last byte of the Stream + // never produces output. + if (*in_pos == in_size) + ret = LZMA_DATA_ERROR; + else + ret = LZMA_BUF_ERROR; + + } else if (ret == LZMA_MEMLIMIT_ERROR) { + // Let the caller know how much memory would + // have been needed. + uint64_t memusage; + (void)stream_decoder.memconfig( + stream_decoder.coder, + memlimit, &memusage, 0); + } + } + } + + // Free the decoder memory. This needs to be done even if + // initialization fails, because the internal API doesn't + // require the initialization function to free its memory on error. + lzma_next_end(&stream_decoder, allocator); + + return ret; +} diff --git a/src/liblzma/common/stream_buffer_encoder.c b/src/liblzma/common/stream_buffer_encoder.c new file mode 100644 index 0000000..7315759 --- /dev/null +++ b/src/liblzma/common/stream_buffer_encoder.c @@ -0,0 +1,142 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_buffer_encoder.c +/// \brief Single-call .xz Stream encoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "index.h" + + +/// Maximum size of Index that has exactly one Record. +/// Index Indicator + Number of Records + Record + CRC32 rounded up to +/// the next multiple of four. +#define INDEX_BOUND ((1 + 1 + 2 * LZMA_VLI_BYTES_MAX + 4 + 3) & ~3) + +/// Stream Header, Stream Footer, and Index +#define HEADERS_BOUND (2 * LZMA_STREAM_HEADER_SIZE + INDEX_BOUND) + + +extern LZMA_API(size_t) +lzma_stream_buffer_bound(size_t uncompressed_size) +{ + // Get the maximum possible size of a Block. + const size_t block_bound = lzma_block_buffer_bound(uncompressed_size); + if (block_bound == 0) + return 0; + + // Catch the possible integer overflow and also prevent the size of + // the Stream exceeding LZMA_VLI_MAX (theoretically possible on + // 64-bit systems). + if (my_min(SIZE_MAX, LZMA_VLI_MAX) - block_bound < HEADERS_BOUND) + return 0; + + return block_bound + HEADERS_BOUND; +} + + +extern LZMA_API(lzma_ret) +lzma_stream_buffer_encode(lzma_filter *filters, lzma_check check, + const lzma_allocator *allocator, + const uint8_t *in, size_t in_size, + uint8_t *out, size_t *out_pos_ptr, size_t out_size) +{ + // Sanity checks + if (filters == NULL || (unsigned int)(check) > LZMA_CHECK_ID_MAX + || (in == NULL && in_size != 0) || out == NULL + || out_pos_ptr == NULL || *out_pos_ptr > out_size) + return LZMA_PROG_ERROR; + + if (!lzma_check_is_supported(check)) + return LZMA_UNSUPPORTED_CHECK; + + // Note for the paranoids: Index encoder prevents the Stream from + // getting too big and still being accepted with LZMA_OK, and Block + // encoder catches if the input is too big. So we don't need to + // separately check if the buffers are too big. + + // Use a local copy. We update *out_pos_ptr only if everything + // succeeds. + size_t out_pos = *out_pos_ptr; + + // Check that there's enough space for both Stream Header and + // Stream Footer. + if (out_size - out_pos <= 2 * LZMA_STREAM_HEADER_SIZE) + return LZMA_BUF_ERROR; + + // Reserve space for Stream Footer so we don't need to check for + // available space again before encoding Stream Footer. + out_size -= LZMA_STREAM_HEADER_SIZE; + + // Encode the Stream Header. + lzma_stream_flags stream_flags = { + .version = 0, + .check = check, + }; + + if (lzma_stream_header_encode(&stream_flags, out + out_pos) + != LZMA_OK) + return LZMA_PROG_ERROR; + + out_pos += LZMA_STREAM_HEADER_SIZE; + + // Encode a Block but only if there is at least one byte of input. + lzma_block block = { + .version = 0, + .check = check, + .filters = filters, + }; + + if (in_size > 0) + return_if_error(lzma_block_buffer_encode(&block, allocator, + in, in_size, out, &out_pos, out_size)); + + // Index + { + // Create an Index. It will have one Record if there was + // at least one byte of input to encode. Otherwise the + // Index will be empty. + lzma_index *i = lzma_index_init(allocator); + if (i == NULL) + return LZMA_MEM_ERROR; + + lzma_ret ret = LZMA_OK; + + if (in_size > 0) + ret = lzma_index_append(i, allocator, + lzma_block_unpadded_size(&block), + block.uncompressed_size); + + // If adding the Record was successful, encode the Index + // and get its size which will be stored into Stream Footer. + if (ret == LZMA_OK) { + ret = lzma_index_buffer_encode( + i, out, &out_pos, out_size); + + stream_flags.backward_size = lzma_index_size(i); + } + + lzma_index_end(i, allocator); + + if (ret != LZMA_OK) + return ret; + } + + // Stream Footer. We have already reserved space for this. + if (lzma_stream_footer_encode(&stream_flags, out + out_pos) + != LZMA_OK) + return LZMA_PROG_ERROR; + + out_pos += LZMA_STREAM_HEADER_SIZE; + + // Everything went fine, make the new output position available + // to the application. + *out_pos_ptr = out_pos; + return LZMA_OK; +} diff --git a/src/liblzma/common/stream_decoder.c b/src/liblzma/common/stream_decoder.c new file mode 100644 index 0000000..6428381 --- /dev/null +++ b/src/liblzma/common/stream_decoder.c @@ -0,0 +1,474 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_decoder.c +/// \brief Decodes .xz Streams +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "stream_decoder.h" +#include "block_decoder.h" +#include "index.h" + + +typedef struct { + enum { + SEQ_STREAM_HEADER, + SEQ_BLOCK_HEADER, + SEQ_BLOCK_INIT, + SEQ_BLOCK_RUN, + SEQ_INDEX, + SEQ_STREAM_FOOTER, + SEQ_STREAM_PADDING, + } sequence; + + /// Block decoder + lzma_next_coder block_decoder; + + /// Block options decoded by the Block Header decoder and used by + /// the Block decoder. + lzma_block block_options; + + /// Stream Flags from Stream Header + lzma_stream_flags stream_flags; + + /// Index is hashed so that it can be compared to the sizes of Blocks + /// with O(1) memory usage. + lzma_index_hash *index_hash; + + /// Memory usage limit + uint64_t memlimit; + + /// Amount of memory actually needed (only an estimate) + uint64_t memusage; + + /// If true, LZMA_NO_CHECK is returned if the Stream has + /// no integrity check. + bool tell_no_check; + + /// If true, LZMA_UNSUPPORTED_CHECK is returned if the Stream has + /// an integrity check that isn't supported by this liblzma build. + bool tell_unsupported_check; + + /// If true, LZMA_GET_CHECK is returned after decoding Stream Header. + bool tell_any_check; + + /// If true, we will tell the Block decoder to skip calculating + /// and verifying the integrity check. + bool ignore_check; + + /// If true, we will decode concatenated Streams that possibly have + /// Stream Padding between or after them. LZMA_STREAM_END is returned + /// once the application isn't giving us any new input (LZMA_FINISH), + /// and we aren't in the middle of a Stream, and possible + /// Stream Padding is a multiple of four bytes. + bool concatenated; + + /// When decoding concatenated Streams, this is true as long as we + /// are decoding the first Stream. This is needed to avoid misleading + /// LZMA_FORMAT_ERROR in case the later Streams don't have valid magic + /// bytes. + bool first_stream; + + /// Write position in buffer[] and position in Stream Padding + size_t pos; + + /// Buffer to hold Stream Header, Block Header, and Stream Footer. + /// Block Header has biggest maximum size. + uint8_t buffer[LZMA_BLOCK_HEADER_SIZE_MAX]; +} lzma_stream_coder; + + +static lzma_ret +stream_decoder_reset(lzma_stream_coder *coder, const lzma_allocator *allocator) +{ + // Initialize the Index hash used to verify the Index. + coder->index_hash = lzma_index_hash_init(coder->index_hash, allocator); + if (coder->index_hash == NULL) + return LZMA_MEM_ERROR; + + // Reset the rest of the variables. + coder->sequence = SEQ_STREAM_HEADER; + coder->pos = 0; + + return LZMA_OK; +} + + +static lzma_ret +stream_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_stream_coder *coder = coder_ptr; + + // When decoding the actual Block, it may be able to produce more + // output even if we don't give it any new input. + while (true) + switch (coder->sequence) { + case SEQ_STREAM_HEADER: { + // Copy the Stream Header to the internal buffer. + lzma_bufcpy(in, in_pos, in_size, coder->buffer, &coder->pos, + LZMA_STREAM_HEADER_SIZE); + + // Return if we didn't get the whole Stream Header yet. + if (coder->pos < LZMA_STREAM_HEADER_SIZE) + return LZMA_OK; + + coder->pos = 0; + + // Decode the Stream Header. + const lzma_ret ret = lzma_stream_header_decode( + &coder->stream_flags, coder->buffer); + if (ret != LZMA_OK) + return ret == LZMA_FORMAT_ERROR && !coder->first_stream + ? LZMA_DATA_ERROR : ret; + + // If we are decoding concatenated Streams, and the later + // Streams have invalid Header Magic Bytes, we give + // LZMA_DATA_ERROR instead of LZMA_FORMAT_ERROR. + coder->first_stream = false; + + // Copy the type of the Check so that Block Header and Block + // decoders see it. + coder->block_options.check = coder->stream_flags.check; + + // Even if we return LZMA_*_CHECK below, we want + // to continue from Block Header decoding. + coder->sequence = SEQ_BLOCK_HEADER; + + // Detect if there's no integrity check or if it is + // unsupported if those were requested by the application. + if (coder->tell_no_check && coder->stream_flags.check + == LZMA_CHECK_NONE) + return LZMA_NO_CHECK; + + if (coder->tell_unsupported_check + && !lzma_check_is_supported( + coder->stream_flags.check)) + return LZMA_UNSUPPORTED_CHECK; + + if (coder->tell_any_check) + return LZMA_GET_CHECK; + } + + // Fall through + + case SEQ_BLOCK_HEADER: { + if (*in_pos >= in_size) + return LZMA_OK; + + if (coder->pos == 0) { + // Detect if it's Index. + if (in[*in_pos] == INDEX_INDICATOR) { + coder->sequence = SEQ_INDEX; + break; + } + + // Calculate the size of the Block Header. Note that + // Block Header decoder wants to see this byte too + // so don't advance *in_pos. + coder->block_options.header_size + = lzma_block_header_size_decode( + in[*in_pos]); + } + + // Copy the Block Header to the internal buffer. + lzma_bufcpy(in, in_pos, in_size, coder->buffer, &coder->pos, + coder->block_options.header_size); + + // Return if we didn't get the whole Block Header yet. + if (coder->pos < coder->block_options.header_size) + return LZMA_OK; + + coder->pos = 0; + coder->sequence = SEQ_BLOCK_INIT; + } + + // Fall through + + case SEQ_BLOCK_INIT: { + // Checking memusage and doing the initialization needs + // its own sequence point because we need to be able to + // retry if we return LZMA_MEMLIMIT_ERROR. + + // Version 1 is needed to support the .ignore_check option. + coder->block_options.version = 1; + + // Set up a buffer to hold the filter chain. Block Header + // decoder will initialize all members of this array so + // we don't need to do it here. + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + coder->block_options.filters = filters; + + // Decode the Block Header. + return_if_error(lzma_block_header_decode(&coder->block_options, + allocator, coder->buffer)); + + // If LZMA_IGNORE_CHECK was used, this flag needs to be set. + // It has to be set after lzma_block_header_decode() because + // it always resets this to false. + coder->block_options.ignore_check = coder->ignore_check; + + // Check the memory usage limit. + const uint64_t memusage = lzma_raw_decoder_memusage(filters); + lzma_ret ret; + + if (memusage == UINT64_MAX) { + // One or more unknown Filter IDs. + ret = LZMA_OPTIONS_ERROR; + } else { + // Now we can set coder->memusage since we know that + // the filter chain is valid. We don't want + // lzma_memusage() to return UINT64_MAX in case of + // invalid filter chain. + coder->memusage = memusage; + + if (memusage > coder->memlimit) { + // The chain would need too much memory. + ret = LZMA_MEMLIMIT_ERROR; + } else { + // Memory usage is OK. + // Initialize the Block decoder. + ret = lzma_block_decoder_init( + &coder->block_decoder, + allocator, + &coder->block_options); + } + } + + // Free the allocated filter options since they are needed + // only to initialize the Block decoder. + lzma_filters_free(filters, allocator); + coder->block_options.filters = NULL; + + // Check if memory usage calculation and Block decoder + // initialization succeeded. + if (ret != LZMA_OK) + return ret; + + coder->sequence = SEQ_BLOCK_RUN; + } + + // Fall through + + case SEQ_BLOCK_RUN: { + const lzma_ret ret = coder->block_decoder.code( + coder->block_decoder.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, + action); + + if (ret != LZMA_STREAM_END) + return ret; + + // Block decoded successfully. Add the new size pair to + // the Index hash. + return_if_error(lzma_index_hash_append(coder->index_hash, + lzma_block_unpadded_size( + &coder->block_options), + coder->block_options.uncompressed_size)); + + coder->sequence = SEQ_BLOCK_HEADER; + break; + } + + case SEQ_INDEX: { + // If we don't have any input, don't call + // lzma_index_hash_decode() since it would return + // LZMA_BUF_ERROR, which we must not do here. + if (*in_pos >= in_size) + return LZMA_OK; + + // Decode the Index and compare it to the hash calculated + // from the sizes of the Blocks (if any). + const lzma_ret ret = lzma_index_hash_decode(coder->index_hash, + in, in_pos, in_size); + if (ret != LZMA_STREAM_END) + return ret; + + coder->sequence = SEQ_STREAM_FOOTER; + } + + // Fall through + + case SEQ_STREAM_FOOTER: { + // Copy the Stream Footer to the internal buffer. + lzma_bufcpy(in, in_pos, in_size, coder->buffer, &coder->pos, + LZMA_STREAM_HEADER_SIZE); + + // Return if we didn't get the whole Stream Footer yet. + if (coder->pos < LZMA_STREAM_HEADER_SIZE) + return LZMA_OK; + + coder->pos = 0; + + // Decode the Stream Footer. The decoder gives + // LZMA_FORMAT_ERROR if the magic bytes don't match, + // so convert that return code to LZMA_DATA_ERROR. + lzma_stream_flags footer_flags; + const lzma_ret ret = lzma_stream_footer_decode( + &footer_flags, coder->buffer); + if (ret != LZMA_OK) + return ret == LZMA_FORMAT_ERROR + ? LZMA_DATA_ERROR : ret; + + // Check that Index Size stored in the Stream Footer matches + // the real size of the Index field. + if (lzma_index_hash_size(coder->index_hash) + != footer_flags.backward_size) + return LZMA_DATA_ERROR; + + // Compare that the Stream Flags fields are identical in + // both Stream Header and Stream Footer. + return_if_error(lzma_stream_flags_compare( + &coder->stream_flags, &footer_flags)); + + if (!coder->concatenated) + return LZMA_STREAM_END; + + coder->sequence = SEQ_STREAM_PADDING; + } + + // Fall through + + case SEQ_STREAM_PADDING: + assert(coder->concatenated); + + // Skip over possible Stream Padding. + while (true) { + if (*in_pos >= in_size) { + // Unless LZMA_FINISH was used, we cannot + // know if there's more input coming later. + if (action != LZMA_FINISH) + return LZMA_OK; + + // Stream Padding must be a multiple of + // four bytes. + return coder->pos == 0 + ? LZMA_STREAM_END + : LZMA_DATA_ERROR; + } + + // If the byte is not zero, it probably indicates + // beginning of a new Stream (or the file is corrupt). + if (in[*in_pos] != 0x00) + break; + + ++*in_pos; + coder->pos = (coder->pos + 1) & 3; + } + + // Stream Padding must be a multiple of four bytes (empty + // Stream Padding is OK). + if (coder->pos != 0) { + ++*in_pos; + return LZMA_DATA_ERROR; + } + + // Prepare to decode the next Stream. + return_if_error(stream_decoder_reset(coder, allocator)); + break; + + default: + assert(0); + return LZMA_PROG_ERROR; + } + + // Never reached +} + + +static void +stream_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_stream_coder *coder = coder_ptr; + lzma_next_end(&coder->block_decoder, allocator); + lzma_index_hash_end(coder->index_hash, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_check +stream_decoder_get_check(const void *coder_ptr) +{ + const lzma_stream_coder *coder = coder_ptr; + return coder->stream_flags.check; +} + + +static lzma_ret +stream_decoder_memconfig(void *coder_ptr, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit) +{ + lzma_stream_coder *coder = coder_ptr; + + *memusage = coder->memusage; + *old_memlimit = coder->memlimit; + + if (new_memlimit != 0) { + if (new_memlimit < coder->memusage) + return LZMA_MEMLIMIT_ERROR; + + coder->memlimit = new_memlimit; + } + + return LZMA_OK; +} + + +extern lzma_ret +lzma_stream_decoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t memlimit, uint32_t flags) +{ + lzma_next_coder_init(&lzma_stream_decoder_init, next, allocator); + + if (flags & ~LZMA_SUPPORTED_FLAGS) + return LZMA_OPTIONS_ERROR; + + lzma_stream_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_stream_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &stream_decode; + next->end = &stream_decoder_end; + next->get_check = &stream_decoder_get_check; + next->memconfig = &stream_decoder_memconfig; + + coder->block_decoder = LZMA_NEXT_CODER_INIT; + coder->index_hash = NULL; + } + + coder->memlimit = my_max(1, memlimit); + coder->memusage = LZMA_MEMUSAGE_BASE; + coder->tell_no_check = (flags & LZMA_TELL_NO_CHECK) != 0; + coder->tell_unsupported_check + = (flags & LZMA_TELL_UNSUPPORTED_CHECK) != 0; + coder->tell_any_check = (flags & LZMA_TELL_ANY_CHECK) != 0; + coder->ignore_check = (flags & LZMA_IGNORE_CHECK) != 0; + coder->concatenated = (flags & LZMA_CONCATENATED) != 0; + coder->first_stream = true; + + return stream_decoder_reset(coder, allocator); +} + + +extern LZMA_API(lzma_ret) +lzma_stream_decoder(lzma_stream *strm, uint64_t memlimit, uint32_t flags) +{ + lzma_next_strm_init(lzma_stream_decoder_init, strm, memlimit, flags); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/stream_decoder.h b/src/liblzma/common/stream_decoder.h new file mode 100644 index 0000000..c13c6ba --- /dev/null +++ b/src/liblzma/common/stream_decoder.h @@ -0,0 +1,22 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_decoder.h +/// \brief Decodes .xz Streams +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_STREAM_DECODER_H +#define LZMA_STREAM_DECODER_H + +#include "common.h" + +extern lzma_ret lzma_stream_decoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + uint64_t memlimit, uint32_t flags); + +#endif diff --git a/src/liblzma/common/stream_decoder_mt.c b/src/liblzma/common/stream_decoder_mt.c new file mode 100644 index 0000000..fd5cd7f --- /dev/null +++ b/src/liblzma/common/stream_decoder_mt.c @@ -0,0 +1,2016 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_decoder_mt.c +/// \brief Multithreaded .xz Stream decoder +// +// Authors: Sebastian Andrzej Siewior +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" +#include "block_decoder.h" +#include "stream_decoder.h" +#include "index.h" +#include "outqueue.h" + + +typedef enum { + /// Waiting for work. + /// Main thread may change this to THR_RUN or THR_EXIT. + THR_IDLE, + + /// Decoding is in progress. + /// Main thread may change this to THR_STOP or THR_EXIT. + /// The worker thread may change this to THR_IDLE. + THR_RUN, + + /// The main thread wants the thread to stop whatever it was doing + /// but not exit. Main thread may change this to THR_EXIT. + /// The worker thread may change this to THR_IDLE. + THR_STOP, + + /// The main thread wants the thread to exit. + THR_EXIT, + +} worker_state; + + +typedef enum { + /// Partial updates (storing of worker thread progress + /// to lzma_outbuf) are disabled. + PARTIAL_DISABLED, + + /// Main thread requests partial updates to be enabled but + /// no partial update has been done by the worker thread yet. + /// + /// Changing from PARTIAL_DISABLED to PARTIAL_START requires + /// use of the worker-thread mutex. Other transitions don't + /// need a mutex. + PARTIAL_START, + + /// Partial updates are enabled and the worker thread has done + /// at least one partial update. + PARTIAL_ENABLED, + +} partial_update_mode; + + +struct worker_thread { + /// Worker state is protected with our mutex. + worker_state state; + + /// Input buffer that will contain the whole Block except Block Header. + uint8_t *in; + + /// Amount of memory allocated for "in" + size_t in_size; + + /// Number of bytes written to "in" by the main thread + size_t in_filled; + + /// Number of bytes consumed from "in" by the worker thread. + size_t in_pos; + + /// Amount of uncompressed data that has been decoded. This local + /// copy is needed because updating outbuf->pos requires locking + /// the main mutex (coder->mutex). + size_t out_pos; + + /// Pointer to the main structure is needed to (1) lock the main + /// mutex (coder->mutex) when updating outbuf->pos and (2) when + /// putting this thread back to the stack of free threads. + struct lzma_stream_coder *coder; + + /// The allocator is set by the main thread. Since a copy of the + /// pointer is kept here, the application must not change the + /// allocator before calling lzma_end(). + const lzma_allocator *allocator; + + /// Output queue buffer to which the uncompressed data is written. + lzma_outbuf *outbuf; + + /// Amount of compressed data that has already been decompressed. + /// This is updated from in_pos when our mutex is locked. + /// This is size_t, not uint64_t, because per-thread progress + /// is limited to sizes of allocated buffers. + size_t progress_in; + + /// Like progress_in but for uncompressed data. + size_t progress_out; + + /// Updating outbuf->pos requires locking the main mutex + /// (coder->mutex). Since the main thread will only read output + /// from the oldest outbuf in the queue, only the worker thread + /// that is associated with the oldest outbuf needs to update its + /// outbuf->pos. This avoids useless mutex contention that would + /// happen if all worker threads were frequently locking the main + /// mutex to update their outbuf->pos. + /// + /// Only when partial_update is something else than PARTIAL_DISABLED, + /// this worker thread will update outbuf->pos after each call to + /// the Block decoder. + partial_update_mode partial_update; + + /// Block decoder + lzma_next_coder block_decoder; + + /// Thread-specific Block options are needed because the Block + /// decoder modifies the struct given to it at initialization. + lzma_block block_options; + + /// Filter chain memory usage + uint64_t mem_filters; + + /// Next structure in the stack of free worker threads. + struct worker_thread *next; + + mythread_mutex mutex; + mythread_cond cond; + + /// The ID of this thread is used to join the thread + /// when it's not needed anymore. + mythread thread_id; +}; + + +struct lzma_stream_coder { + enum { + SEQ_STREAM_HEADER, + SEQ_BLOCK_HEADER, + SEQ_BLOCK_INIT, + SEQ_BLOCK_THR_INIT, + SEQ_BLOCK_THR_RUN, + SEQ_BLOCK_DIRECT_INIT, + SEQ_BLOCK_DIRECT_RUN, + SEQ_INDEX_WAIT_OUTPUT, + SEQ_INDEX_DECODE, + SEQ_STREAM_FOOTER, + SEQ_STREAM_PADDING, + SEQ_ERROR, + } sequence; + + /// Block decoder + lzma_next_coder block_decoder; + + /// Every Block Header will be decoded into this structure. + /// This is also used to initialize a Block decoder when in + /// direct mode. In threaded mode, a thread-specific copy will + /// be made for decoder initialization because the Block decoder + /// will modify the structure given to it. + lzma_block block_options; + + /// Buffer to hold a filter chain for Block Header decoding and + /// initialization. These are freed after successful Block decoder + /// initialization or at stream_decoder_mt_end(). The thread-specific + /// copy of block_options won't hold a pointer to filters[] after + /// initialization. + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + + /// Stream Flags from Stream Header + lzma_stream_flags stream_flags; + + /// Index is hashed so that it can be compared to the sizes of Blocks + /// with O(1) memory usage. + lzma_index_hash *index_hash; + + + /// Maximum wait time if cannot use all the input and cannot + /// fill the output buffer. This is in milliseconds. + uint32_t timeout; + + + /// Error code from a worker thread. + /// + /// \note Use mutex. + lzma_ret thread_error; + + /// Error code to return after pending output has been copied out. If + /// set in read_output_and_wait(), this is a mirror of thread_error. + /// If set in stream_decode_mt() then it's, for example, error that + /// occurred when decoding Block Header. + lzma_ret pending_error; + + /// Number of threads that will be created at maximum. + uint32_t threads_max; + + /// Number of thread structures that have been initialized from + /// "threads", and thus the number of worker threads actually + /// created so far. + uint32_t threads_initialized; + + /// Array of allocated thread-specific structures. When no threads + /// are in use (direct mode) this is NULL. In threaded mode this + /// points to an array of threads_max number of worker_thread structs. + struct worker_thread *threads; + + /// Stack of free threads. When a thread finishes, it puts itself + /// back into this stack. This starts as empty because threads + /// are created only when actually needed. + /// + /// \note Use mutex. + struct worker_thread *threads_free; + + /// The most recent worker thread to which the main thread writes + /// the new input from the application. + struct worker_thread *thr; + + /// Output buffer queue for decompressed data from the worker threads + /// + /// \note Use mutex with operations that need it. + lzma_outq outq; + + mythread_mutex mutex; + mythread_cond cond; + + + /// Memory usage that will not be exceeded in multi-threaded mode. + /// Single-threaded mode can exceed this even by a large amount. + uint64_t memlimit_threading; + + /// Memory usage limit that should never be exceeded. + /// LZMA_MEMLIMIT_ERROR will be returned if decoding isn't possible + /// even in single-threaded mode without exceeding this limit. + uint64_t memlimit_stop; + + /// Amount of memory in use by the direct mode decoder + /// (coder->block_decoder). In threaded mode this is 0. + uint64_t mem_direct_mode; + + /// Amount of memory needed by the running worker threads. + /// This doesn't include the memory needed by the output buffer. + /// + /// \note Use mutex. + uint64_t mem_in_use; + + /// Amount of memory used by the idle (cached) threads. + /// + /// \note Use mutex. + uint64_t mem_cached; + + + /// Amount of memory needed for the filter chain of the next Block. + uint64_t mem_next_filters; + + /// Amount of memory needed for the thread-specific input buffer + /// for the next Block. + uint64_t mem_next_in; + + /// Amount of memory actually needed to decode the next Block + /// in threaded mode. This is + /// mem_next_filters + mem_next_in + memory needed for lzma_outbuf. + uint64_t mem_next_block; + + + /// Amount of compressed data in Stream Header + Blocks that have + /// already been finished. + /// + /// \note Use mutex. + uint64_t progress_in; + + /// Amount of uncompressed data in Blocks that have already + /// been finished. + /// + /// \note Use mutex. + uint64_t progress_out; + + + /// If true, LZMA_NO_CHECK is returned if the Stream has + /// no integrity check. + bool tell_no_check; + + /// If true, LZMA_UNSUPPORTED_CHECK is returned if the Stream has + /// an integrity check that isn't supported by this liblzma build. + bool tell_unsupported_check; + + /// If true, LZMA_GET_CHECK is returned after decoding Stream Header. + bool tell_any_check; + + /// If true, we will tell the Block decoder to skip calculating + /// and verifying the integrity check. + bool ignore_check; + + /// If true, we will decode concatenated Streams that possibly have + /// Stream Padding between or after them. LZMA_STREAM_END is returned + /// once the application isn't giving us any new input (LZMA_FINISH), + /// and we aren't in the middle of a Stream, and possible + /// Stream Padding is a multiple of four bytes. + bool concatenated; + + /// If true, we will return any errors immediately instead of first + /// producing all output before the location of the error. + bool fail_fast; + + + /// When decoding concatenated Streams, this is true as long as we + /// are decoding the first Stream. This is needed to avoid misleading + /// LZMA_FORMAT_ERROR in case the later Streams don't have valid magic + /// bytes. + bool first_stream; + + /// This is used to track if the previous call to stream_decode_mt() + /// had output space (*out_pos < out_size) and managed to fill the + /// output buffer (*out_pos == out_size). This may be set to true + /// in read_output_and_wait(). This is read and then reset to false + /// at the beginning of stream_decode_mt(). + /// + /// This is needed to support applications that call lzma_code() in + /// such a way that more input is provided only when lzma_code() + /// didn't fill the output buffer completely. Basically, this makes + /// it easier to convert such applications from single-threaded + /// decoder to multi-threaded decoder. + bool out_was_filled; + + /// Write position in buffer[] and position in Stream Padding + size_t pos; + + /// Buffer to hold Stream Header, Block Header, and Stream Footer. + /// Block Header has biggest maximum size. + uint8_t buffer[LZMA_BLOCK_HEADER_SIZE_MAX]; +}; + + +/// Enables updating of outbuf->pos. This is a callback function that is +/// used with lzma_outq_enable_partial_output(). +static void +worker_enable_partial_update(void *thr_ptr) +{ + struct worker_thread *thr = thr_ptr; + + mythread_sync(thr->mutex) { + thr->partial_update = PARTIAL_START; + mythread_cond_signal(&thr->cond); + } +} + + +/// Things do to at THR_STOP or when finishing a Block. +/// This is called with thr->mutex locked. +static void +worker_stop(struct worker_thread *thr) +{ + // Update memory usage counters. + thr->coder->mem_in_use -= thr->in_size; + thr->in_size = 0; // thr->in was freed above. + + thr->coder->mem_in_use -= thr->mem_filters; + thr->coder->mem_cached += thr->mem_filters; + + // Put this thread to the stack of free threads. + thr->next = thr->coder->threads_free; + thr->coder->threads_free = thr; + + mythread_cond_signal(&thr->coder->cond); + return; +} + + +static MYTHREAD_RET_TYPE +worker_decoder(void *thr_ptr) +{ + struct worker_thread *thr = thr_ptr; + size_t in_filled; + partial_update_mode partial_update; + lzma_ret ret; + +next_loop_lock: + + mythread_mutex_lock(&thr->mutex); +next_loop_unlocked: + + if (thr->state == THR_IDLE) { + mythread_cond_wait(&thr->cond, &thr->mutex); + goto next_loop_unlocked; + } + + if (thr->state == THR_EXIT) { + mythread_mutex_unlock(&thr->mutex); + + lzma_free(thr->in, thr->allocator); + lzma_next_end(&thr->block_decoder, thr->allocator); + + mythread_mutex_destroy(&thr->mutex); + mythread_cond_destroy(&thr->cond); + + return MYTHREAD_RET_VALUE; + } + + if (thr->state == THR_STOP) { + thr->state = THR_IDLE; + mythread_mutex_unlock(&thr->mutex); + + mythread_sync(thr->coder->mutex) { + worker_stop(thr); + } + + goto next_loop_lock; + } + + assert(thr->state == THR_RUN); + + // Update progress info for get_progress(). + thr->progress_in = thr->in_pos; + thr->progress_out = thr->out_pos; + + // If we don't have any new input, wait for a signal from the main + // thread except if partial output has just been enabled. In that + // case we will do one normal run so that the partial output info + // gets passed to the main thread. The call to block_decoder.code() + // is useless but harmless as it can occur only once per Block. + in_filled = thr->in_filled; + partial_update = thr->partial_update; + + if (in_filled == thr->in_pos && partial_update != PARTIAL_START) { + mythread_cond_wait(&thr->cond, &thr->mutex); + goto next_loop_unlocked; + } + + mythread_mutex_unlock(&thr->mutex); + + // Pass the input in small chunks to the Block decoder. + // This way we react reasonably fast if we are told to stop/exit, + // and (when partial update is enabled) we tell about our progress + // to the main thread frequently enough. + const size_t chunk_size = 16384; + if ((in_filled - thr->in_pos) > chunk_size) + in_filled = thr->in_pos + chunk_size; + + ret = thr->block_decoder.code( + thr->block_decoder.coder, thr->allocator, + thr->in, &thr->in_pos, in_filled, + thr->outbuf->buf, &thr->out_pos, + thr->outbuf->allocated, LZMA_RUN); + + if (ret == LZMA_OK) { + if (partial_update != PARTIAL_DISABLED) { + // The main thread uses thr->mutex to change from + // PARTIAL_DISABLED to PARTIAL_START. The main thread + // doesn't care about this variable after that so we + // can safely change it here to PARTIAL_ENABLED + // without a mutex. + thr->partial_update = PARTIAL_ENABLED; + + // The main thread is reading decompressed data + // from thr->outbuf. Tell the main thread about + // our progress. + // + // NOTE: It's possible that we consumed input without + // producing any new output so it's possible that + // only in_pos has changed. In case of PARTIAL_START + // it is possible that neither in_pos nor out_pos has + // changed. + mythread_sync(thr->coder->mutex) { + thr->outbuf->pos = thr->out_pos; + thr->outbuf->decoder_in_pos = thr->in_pos; + mythread_cond_signal(&thr->coder->cond); + } + } + + goto next_loop_lock; + } + + // Either we finished successfully (LZMA_STREAM_END) or an error + // occurred. Both cases are handled almost identically. The error + // case requires updating thr->coder->thread_error. + // + // The sizes are in the Block Header and the Block decoder + // checks that they match, thus we know these: + assert(ret != LZMA_STREAM_END || thr->in_pos == thr->in_size); + assert(ret != LZMA_STREAM_END + || thr->out_pos == thr->block_options.uncompressed_size); + + // Free the input buffer. Don't update in_size as we need + // it later to update thr->coder->mem_in_use. + lzma_free(thr->in, thr->allocator); + thr->in = NULL; + + mythread_sync(thr->mutex) { + if (thr->state != THR_EXIT) + thr->state = THR_IDLE; + } + + mythread_sync(thr->coder->mutex) { + // Move our progress info to the main thread. + thr->coder->progress_in += thr->in_pos; + thr->coder->progress_out += thr->out_pos; + thr->progress_in = 0; + thr->progress_out = 0; + + // Mark the outbuf as finished. + thr->outbuf->pos = thr->out_pos; + thr->outbuf->decoder_in_pos = thr->in_pos; + thr->outbuf->finished = true; + thr->outbuf->finish_ret = ret; + thr->outbuf = NULL; + + // If an error occurred, tell it to the main thread. + if (ret != LZMA_STREAM_END + && thr->coder->thread_error == LZMA_OK) + thr->coder->thread_error = ret; + + worker_stop(thr); + } + + goto next_loop_lock; +} + + +/// Tells the worker threads to exit and waits for them to terminate. +static void +threads_end(struct lzma_stream_coder *coder, const lzma_allocator *allocator) +{ + for (uint32_t i = 0; i < coder->threads_initialized; ++i) { + mythread_sync(coder->threads[i].mutex) { + coder->threads[i].state = THR_EXIT; + mythread_cond_signal(&coder->threads[i].cond); + } + } + + for (uint32_t i = 0; i < coder->threads_initialized; ++i) + mythread_join(coder->threads[i].thread_id); + + lzma_free(coder->threads, allocator); + coder->threads_initialized = 0; + coder->threads = NULL; + coder->threads_free = NULL; + + // The threads don't update these when they exit. Do it here. + coder->mem_in_use = 0; + coder->mem_cached = 0; + + return; +} + + +static void +threads_stop(struct lzma_stream_coder *coder) +{ + for (uint32_t i = 0; i < coder->threads_initialized; ++i) { + mythread_sync(coder->threads[i].mutex) { + // The state must be changed conditionally because + // THR_IDLE -> THR_STOP is not a valid state change. + if (coder->threads[i].state != THR_IDLE) { + coder->threads[i].state = THR_STOP; + mythread_cond_signal(&coder->threads[i].cond); + } + } + } + + return; +} + + +/// Initialize a new worker_thread structure and create a new thread. +static lzma_ret +initialize_new_thread(struct lzma_stream_coder *coder, + const lzma_allocator *allocator) +{ + // Allocate the coder->threads array if needed. It's done here instead + // of when initializing the decoder because we don't need this if we + // use the direct mode (we may even free coder->threads in the middle + // of the file if we switch from threaded to direct mode). + if (coder->threads == NULL) { + coder->threads = lzma_alloc( + coder->threads_max * sizeof(struct worker_thread), + allocator); + + if (coder->threads == NULL) + return LZMA_MEM_ERROR; + } + + // Pick a free structure. + assert(coder->threads_initialized < coder->threads_max); + struct worker_thread *thr + = &coder->threads[coder->threads_initialized]; + + if (mythread_mutex_init(&thr->mutex)) + goto error_mutex; + + if (mythread_cond_init(&thr->cond)) + goto error_cond; + + thr->state = THR_IDLE; + thr->in = NULL; + thr->in_size = 0; + thr->allocator = allocator; + thr->coder = coder; + thr->outbuf = NULL; + thr->block_decoder = LZMA_NEXT_CODER_INIT; + thr->mem_filters = 0; + + if (mythread_create(&thr->thread_id, worker_decoder, thr)) + goto error_thread; + + ++coder->threads_initialized; + coder->thr = thr; + + return LZMA_OK; + +error_thread: + mythread_cond_destroy(&thr->cond); + +error_cond: + mythread_mutex_destroy(&thr->mutex); + +error_mutex: + return LZMA_MEM_ERROR; +} + + +static lzma_ret +get_thread(struct lzma_stream_coder *coder, const lzma_allocator *allocator) +{ + // If there is a free structure on the stack, use it. + mythread_sync(coder->mutex) { + if (coder->threads_free != NULL) { + coder->thr = coder->threads_free; + coder->threads_free = coder->threads_free->next; + + // The thread is no longer in the cache so substract + // it from the cached memory usage. Don't add it + // to mem_in_use though; the caller will handle it + // since it knows how much memory it will actually + // use (the filter chain might change). + coder->mem_cached -= coder->thr->mem_filters; + } + } + + if (coder->thr == NULL) { + assert(coder->threads_initialized < coder->threads_max); + + // Initialize a new thread. + return_if_error(initialize_new_thread(coder, allocator)); + } + + coder->thr->in_filled = 0; + coder->thr->in_pos = 0; + coder->thr->out_pos = 0; + + coder->thr->progress_in = 0; + coder->thr->progress_out = 0; + + coder->thr->partial_update = PARTIAL_DISABLED; + + return LZMA_OK; +} + + +static lzma_ret +read_output_and_wait(struct lzma_stream_coder *coder, + const lzma_allocator *allocator, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size, + bool *input_is_possible, + bool waiting_allowed, + mythread_condtime *wait_abs, bool *has_blocked) +{ + lzma_ret ret = LZMA_OK; + + mythread_sync(coder->mutex) { + do { + // Get as much output from the queue as is possible + // without blocking. + const size_t out_start = *out_pos; + do { + ret = lzma_outq_read(&coder->outq, allocator, + out, out_pos, out_size, + NULL, NULL); + + // If a Block was finished, tell the worker + // thread of the next Block (if it is still + // running) to start telling the main thread + // when new output is available. + if (ret == LZMA_STREAM_END) + lzma_outq_enable_partial_output( + &coder->outq, + &worker_enable_partial_update); + + // Loop until a Block wasn't finished. + // It's important to loop around even if + // *out_pos == out_size because there could + // be an empty Block that will return + // LZMA_STREAM_END without needing any + // output space. + } while (ret == LZMA_STREAM_END); + + // Check if lzma_outq_read reported an error from + // the Block decoder. + if (ret != LZMA_OK) + break; + + // If the output buffer is now full but it wasn't full + // when this function was called, set out_was_filled. + // This way the next call to stream_decode_mt() knows + // that some output was produced and no output space + // remained in the previous call to stream_decode_mt(). + if (*out_pos == out_size && *out_pos != out_start) + coder->out_was_filled = true; + + // Check if any thread has indicated an error. + if (coder->thread_error != LZMA_OK) { + // If LZMA_FAIL_FAST was used, report errors + // from worker threads immediately. + if (coder->fail_fast) { + ret = coder->thread_error; + break; + } + + // Otherwise set pending_error. The value we + // set here will not actually get used other + // than working as a flag that an error has + // occurred. This is because in SEQ_ERROR + // all output before the error will be read + // first by calling this function, and once we + // reach the location of the (first) error the + // error code from the above lzma_outq_read() + // will be returned to the application. + // + // Use LZMA_PROG_ERROR since the value should + // never leak to the application. It's + // possible that pending_error has already + // been set but that doesn't matter: if we get + // here, pending_error only works as a flag. + coder->pending_error = LZMA_PROG_ERROR; + } + + // Check if decoding of the next Block can be started. + // The memusage of the active threads must be low + // enough, there must be a free buffer slot in the + // output queue, and there must be a free thread + // (that can be either created or an existing one + // reused). + // + // NOTE: This is checked after reading the output + // above because reading the output can free a slot in + // the output queue and also reduce active memusage. + // + // NOTE: If output queue is empty, then input will + // always be possible. + if (input_is_possible != NULL + && coder->memlimit_threading + - coder->mem_in_use + - coder->outq.mem_in_use + >= coder->mem_next_block + && lzma_outq_has_buf(&coder->outq) + && (coder->threads_initialized + < coder->threads_max + || coder->threads_free + != NULL)) { + *input_is_possible = true; + break; + } + + // If the caller doesn't want us to block, return now. + if (!waiting_allowed) + break; + + // This check is needed only when input_is_possible + // is NULL. We must return if we aren't waiting for + // input to become possible and there is no more + // output coming from the queue. + if (lzma_outq_is_empty(&coder->outq)) { + assert(input_is_possible == NULL); + break; + } + + // If there is more data available from the queue, + // our out buffer must be full and we need to return + // so that the application can provide more output + // space. + // + // NOTE: In general lzma_outq_is_readable() can return + // true also when there are no more bytes available. + // This can happen when a Block has finished without + // providing any new output. We know that this is not + // the case because in the beginning of this loop we + // tried to read as much as possible even when we had + // no output space left and the mutex has been locked + // all the time (so worker threads cannot have changed + // anything). Thus there must be actual pending output + // in the queue. + if (lzma_outq_is_readable(&coder->outq)) { + assert(*out_pos == out_size); + break; + } + + // If the application stops providing more input + // in the middle of a Block, there will eventually + // be one worker thread left that is stuck waiting for + // more input (that might never arrive) and a matching + // outbuf which the worker thread cannot finish due + // to lack of input. We must detect this situation, + // otherwise we would end up waiting indefinitely + // (if no timeout is in use) or keep returning + // LZMA_TIMED_OUT while making no progress. Thus, the + // application would never get LZMA_BUF_ERROR from + // lzma_code() which would tell the application that + // no more progress is possible. No LZMA_BUF_ERROR + // means that, for example, truncated .xz files could + // cause an infinite loop. + // + // A worker thread doing partial updates will + // store not only the output position in outbuf->pos + // but also the matching input position in + // outbuf->decoder_in_pos. Here we check if that + // input position matches the amount of input that + // the worker thread has been given (in_filled). + // If so, we must return and not wait as no more + // output will be coming without first getting more + // input to the worker thread. If the application + // keeps calling lzma_code() without providing more + // input, it will eventually get LZMA_BUF_ERROR. + // + // NOTE: We can read partial_update and in_filled + // without thr->mutex as only the main thread + // modifies these variables. decoder_in_pos requires + // coder->mutex which we are already holding. + if (coder->thr != NULL && coder->thr->partial_update + != PARTIAL_DISABLED) { + // There is exactly one outbuf in the queue. + assert(coder->thr->outbuf == coder->outq.head); + assert(coder->thr->outbuf == coder->outq.tail); + + if (coder->thr->outbuf->decoder_in_pos + == coder->thr->in_filled) + break; + } + + // Wait for input or output to become possible. + if (coder->timeout != 0) { + // See the comment in stream_encoder_mt.c + // about why mythread_condtime_set() is used + // like this. + // + // FIXME? + // In contrast to the encoder, this calls + // _condtime_set while the mutex is locked. + if (!*has_blocked) { + *has_blocked = true; + mythread_condtime_set(wait_abs, + &coder->cond, + coder->timeout); + } + + if (mythread_cond_timedwait(&coder->cond, + &coder->mutex, + wait_abs) != 0) { + ret = LZMA_TIMED_OUT; + break; + } + } else { + mythread_cond_wait(&coder->cond, + &coder->mutex); + } + } while (ret == LZMA_OK); + } + + // If we are returning an error, then the application cannot get + // more output from us and thus keeping the threads running is + // useless and waste of CPU time. + if (ret != LZMA_OK && ret != LZMA_TIMED_OUT) + threads_stop(coder); + + return ret; +} + + +static lzma_ret +decode_block_header(struct lzma_stream_coder *coder, + const lzma_allocator *allocator, const uint8_t *restrict in, + size_t *restrict in_pos, size_t in_size) +{ + if (*in_pos >= in_size) + return LZMA_OK; + + if (coder->pos == 0) { + // Detect if it's Index. + if (in[*in_pos] == INDEX_INDICATOR) + return LZMA_INDEX_DETECTED; + + // Calculate the size of the Block Header. Note that + // Block Header decoder wants to see this byte too + // so don't advance *in_pos. + coder->block_options.header_size + = lzma_block_header_size_decode( + in[*in_pos]); + } + + // Copy the Block Header to the internal buffer. + lzma_bufcpy(in, in_pos, in_size, coder->buffer, &coder->pos, + coder->block_options.header_size); + + // Return if we didn't get the whole Block Header yet. + if (coder->pos < coder->block_options.header_size) + return LZMA_OK; + + coder->pos = 0; + + // Version 1 is needed to support the .ignore_check option. + coder->block_options.version = 1; + + // Block Header decoder will initialize all members of this array + // so we don't need to do it here. + coder->block_options.filters = coder->filters; + + // Decode the Block Header. + return_if_error(lzma_block_header_decode(&coder->block_options, + allocator, coder->buffer)); + + // If LZMA_IGNORE_CHECK was used, this flag needs to be set. + // It has to be set after lzma_block_header_decode() because + // it always resets this to false. + coder->block_options.ignore_check = coder->ignore_check; + + // coder->block_options is ready now. + return LZMA_STREAM_END; +} + + +/// Get the size of the Compressed Data + Block Padding + Check. +static size_t +comp_blk_size(const struct lzma_stream_coder *coder) +{ + return vli_ceil4(coder->block_options.compressed_size) + + lzma_check_size(coder->stream_flags.check); +} + + +/// Returns true if the size (compressed or uncompressed) is such that +/// threaded decompression cannot be used. Sizes that are too big compared +/// to SIZE_MAX must be rejected to avoid integer overflows and truncations +/// when lzma_vli is assigned to a size_t. +static bool +is_direct_mode_needed(lzma_vli size) +{ + return size == LZMA_VLI_UNKNOWN || size > SIZE_MAX / 3; +} + + +static lzma_ret +stream_decoder_reset(struct lzma_stream_coder *coder, + const lzma_allocator *allocator) +{ + // Initialize the Index hash used to verify the Index. + coder->index_hash = lzma_index_hash_init(coder->index_hash, allocator); + if (coder->index_hash == NULL) + return LZMA_MEM_ERROR; + + // Reset the rest of the variables. + coder->sequence = SEQ_STREAM_HEADER; + coder->pos = 0; + + return LZMA_OK; +} + + +static lzma_ret +stream_decode_mt(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size, lzma_action action) +{ + struct lzma_stream_coder *coder = coder_ptr; + + mythread_condtime wait_abs; + bool has_blocked = false; + + // Determine if in SEQ_BLOCK_HEADER and SEQ_BLOCK_THR_RUN we should + // tell read_output_and_wait() to wait until it can fill the output + // buffer (or a timeout occurs). Two conditions must be met: + // + // (1) If the caller provided no new input. The reason for this + // can be, for example, the end of the file or that there is + // a pause in the input stream and more input is available + // a little later. In this situation we should wait for output + // because otherwise we would end up in a busy-waiting loop where + // we make no progress and the application just calls us again + // without providing any new input. This would then result in + // LZMA_BUF_ERROR even though more output would be available + // once the worker threads decode more data. + // + // (2) Even if (1) is true, we will not wait if the previous call to + // this function managed to produce some output and the output + // buffer became full. This is for compatibility with applications + // that call lzma_code() in such a way that new input is provided + // only when the output buffer didn't become full. Without this + // trick such applications would have bad performance (bad + // parallelization due to decoder not getting input fast enough). + // + // NOTE: Such loops might require that timeout is disabled (0) + // if they assume that output-not-full implies that all input has + // been consumed. If and only if timeout is enabled, we may return + // when output isn't full *and* not all input has been consumed. + // + // However, if LZMA_FINISH is used, the above is ignored and we always + // wait (timeout can still cause us to return) because we know that + // we won't get any more input. This matters if the input file is + // truncated and we are doing single-shot decoding, that is, + // timeout = 0 and LZMA_FINISH is used on the first call to + // lzma_code() and the output buffer is known to be big enough + // to hold all uncompressed data: + // + // - If LZMA_FINISH wasn't handled specially, we could return + // LZMA_OK before providing all output that is possible with the + // truncated input. The rest would be available if lzma_code() was + // called again but then it's not single-shot decoding anymore. + // + // - By handling LZMA_FINISH specially here, the first call will + // produce all the output, matching the behavior of the + // single-threaded decoder. + // + // So it's a very specific corner case but also easy to avoid. Note + // that this special handling of LZMA_FINISH has no effect for + // single-shot decoding when the input file is valid (not truncated); + // premature LZMA_OK wouldn't be possible as long as timeout = 0. + const bool waiting_allowed = action == LZMA_FINISH + || (*in_pos == in_size && !coder->out_was_filled); + coder->out_was_filled = false; + + while (true) + switch (coder->sequence) { + case SEQ_STREAM_HEADER: { + // Copy the Stream Header to the internal buffer. + const size_t in_old = *in_pos; + lzma_bufcpy(in, in_pos, in_size, coder->buffer, &coder->pos, + LZMA_STREAM_HEADER_SIZE); + coder->progress_in += *in_pos - in_old; + + // Return if we didn't get the whole Stream Header yet. + if (coder->pos < LZMA_STREAM_HEADER_SIZE) + return LZMA_OK; + + coder->pos = 0; + + // Decode the Stream Header. + const lzma_ret ret = lzma_stream_header_decode( + &coder->stream_flags, coder->buffer); + if (ret != LZMA_OK) + return ret == LZMA_FORMAT_ERROR && !coder->first_stream + ? LZMA_DATA_ERROR : ret; + + // If we are decoding concatenated Streams, and the later + // Streams have invalid Header Magic Bytes, we give + // LZMA_DATA_ERROR instead of LZMA_FORMAT_ERROR. + coder->first_stream = false; + + // Copy the type of the Check so that Block Header and Block + // decoders see it. + coder->block_options.check = coder->stream_flags.check; + + // Even if we return LZMA_*_CHECK below, we want + // to continue from Block Header decoding. + coder->sequence = SEQ_BLOCK_HEADER; + + // Detect if there's no integrity check or if it is + // unsupported if those were requested by the application. + if (coder->tell_no_check && coder->stream_flags.check + == LZMA_CHECK_NONE) + return LZMA_NO_CHECK; + + if (coder->tell_unsupported_check + && !lzma_check_is_supported( + coder->stream_flags.check)) + return LZMA_UNSUPPORTED_CHECK; + + if (coder->tell_any_check) + return LZMA_GET_CHECK; + } + + // Fall through + + case SEQ_BLOCK_HEADER: { + const size_t in_old = *in_pos; + const lzma_ret ret = decode_block_header(coder, allocator, + in, in_pos, in_size); + coder->progress_in += *in_pos - in_old; + + if (ret == LZMA_OK) { + // We didn't decode the whole Block Header yet. + // + // Read output from the queue before returning. This + // is important because it is possible that the + // application doesn't have any new input available + // immediately. If we didn't try to copy output from + // the output queue here, lzma_code() could end up + // returning LZMA_BUF_ERROR even though queued output + // is available. + // + // If the lzma_code() call provided at least one input + // byte, only copy as much data from the output queue + // as is available immediately. This way the + // application will be able to provide more input + // without a delay. + // + // On the other hand, if lzma_code() was called with + // an empty input buffer(*), treat it specially: try + // to fill the output buffer even if it requires + // waiting for the worker threads to provide output + // (timeout, if specified, can still cause us to + // return). + // + // - This way the application will be able to get all + // data that can be decoded from the input provided + // so far. + // + // - We avoid both premature LZMA_BUF_ERROR and + // busy-waiting where the application repeatedly + // calls lzma_code() which immediately returns + // LZMA_OK without providing new data. + // + // - If the queue becomes empty, we won't wait + // anything and will return LZMA_OK immediately + // (coder->timeout is completely ignored). + // + // (*) See the comment at the beginning of this + // function how waiting_allowed is determined + // and why there is an exception to the rule + // of "called with an empty input buffer". + assert(*in_pos == in_size); + + // If LZMA_FINISH was used we know that we won't get + // more input, so the file must be truncated if we + // get here. If worker threads don't detect any + // errors, eventually there will be no more output + // while we keep returning LZMA_OK which gets + // converted to LZMA_BUF_ERROR in lzma_code(). + // + // If fail-fast is enabled then we will return + // immediately using LZMA_DATA_ERROR instead of + // LZMA_OK or LZMA_BUF_ERROR. Rationale for the + // error code: + // + // - Worker threads may have a large amount of + // not-yet-decoded input data and we don't + // know for sure if all data is valid. Bad + // data there would result in LZMA_DATA_ERROR + // when fail-fast isn't used. + // + // - Immediate LZMA_BUF_ERROR would be a bit weird + // considering the older liblzma code. lzma_code() + // even has an assertion to prevent coders from + // returning LZMA_BUF_ERROR directly. + // + // The downside of this is that with fail-fast apps + // cannot always distinguish between corrupt and + // truncated files. + if (action == LZMA_FINISH && coder->fail_fast) { + // We won't produce any more output. Stop + // the unfinished worker threads so they + // won't waste CPU time. + threads_stop(coder); + return LZMA_DATA_ERROR; + } + + // read_output_and_wait() will call threads_stop() + // if needed so with that we can use return_if_error. + return_if_error(read_output_and_wait(coder, allocator, + out, out_pos, out_size, + NULL, waiting_allowed, + &wait_abs, &has_blocked)); + + if (coder->pending_error != LZMA_OK) { + coder->sequence = SEQ_ERROR; + break; + } + + return LZMA_OK; + } + + if (ret == LZMA_INDEX_DETECTED) { + coder->sequence = SEQ_INDEX_WAIT_OUTPUT; + break; + } + + // See if an error occurred. + if (ret != LZMA_STREAM_END) { + // NOTE: Here and in all other places where + // pending_error is set, it may overwrite the value + // (LZMA_PROG_ERROR) set by read_output_and_wait(). + // That function might overwrite value set here too. + // These are fine because when read_output_and_wait() + // sets pending_error, it actually works as a flag + // variable only ("some error has occurred") and the + // actual value of pending_error is not used in + // SEQ_ERROR. In such cases SEQ_ERROR will eventually + // get the correct error code from the return value of + // a later read_output_and_wait() call. + coder->pending_error = ret; + coder->sequence = SEQ_ERROR; + break; + } + + // Calculate the memory usage of the filters / Block decoder. + coder->mem_next_filters = lzma_raw_decoder_memusage( + coder->filters); + + if (coder->mem_next_filters == UINT64_MAX) { + // One or more unknown Filter IDs. + coder->pending_error = LZMA_OPTIONS_ERROR; + coder->sequence = SEQ_ERROR; + break; + } + + coder->sequence = SEQ_BLOCK_INIT; + } + + // Fall through + + case SEQ_BLOCK_INIT: { + // Check if decoding is possible at all with the current + // memlimit_stop which we must never exceed. + // + // This needs to be the first thing in SEQ_BLOCK_INIT + // to make it possible to restart decoding after increasing + // memlimit_stop with lzma_memlimit_set(). + if (coder->mem_next_filters > coder->memlimit_stop) { + // Flush pending output before returning + // LZMA_MEMLIMIT_ERROR. If the application doesn't + // want to increase the limit, at least it will get + // all the output possible so far. + return_if_error(read_output_and_wait(coder, allocator, + out, out_pos, out_size, + NULL, true, &wait_abs, &has_blocked)); + + if (!lzma_outq_is_empty(&coder->outq)) + return LZMA_OK; + + return LZMA_MEMLIMIT_ERROR; + } + + // Check if the size information is available in Block Header. + // If it is, check if the sizes are small enough that we don't + // need to worry *too* much about integer overflows later in + // the code. If these conditions are not met, we must use the + // single-threaded direct mode. + if (is_direct_mode_needed(coder->block_options.compressed_size) + || is_direct_mode_needed( + coder->block_options.uncompressed_size)) { + coder->sequence = SEQ_BLOCK_DIRECT_INIT; + break; + } + + // Calculate the amount of memory needed for the input and + // output buffers in threaded mode. + // + // These cannot overflow because we already checked that + // the sizes are small enough using is_direct_mode_needed(). + coder->mem_next_in = comp_blk_size(coder); + const uint64_t mem_buffers = coder->mem_next_in + + lzma_outq_outbuf_memusage( + coder->block_options.uncompressed_size); + + // Add the amount needed by the filters. + // Avoid integer overflows. + if (UINT64_MAX - mem_buffers < coder->mem_next_filters) { + // Use direct mode if the memusage would overflow. + // This is a theoretical case that shouldn't happen + // in practice unless the input file is weird (broken + // or malicious). + coder->sequence = SEQ_BLOCK_DIRECT_INIT; + break; + } + + // Amount of memory needed to decode this Block in + // threaded mode: + coder->mem_next_block = coder->mem_next_filters + mem_buffers; + + // If this alone would exceed memlimit_threading, then we must + // use the single-threaded direct mode. + if (coder->mem_next_block > coder->memlimit_threading) { + coder->sequence = SEQ_BLOCK_DIRECT_INIT; + break; + } + + // Use the threaded mode. Free the direct mode decoder in + // case it has been initialized. + lzma_next_end(&coder->block_decoder, allocator); + coder->mem_direct_mode = 0; + + // Since we already know what the sizes are supposed to be, + // we can already add them to the Index hash. The Block + // decoder will verify the values while decoding. + const lzma_ret ret = lzma_index_hash_append(coder->index_hash, + lzma_block_unpadded_size( + &coder->block_options), + coder->block_options.uncompressed_size); + if (ret != LZMA_OK) { + coder->pending_error = ret; + coder->sequence = SEQ_ERROR; + break; + } + + coder->sequence = SEQ_BLOCK_THR_INIT; + } + + // Fall through + + case SEQ_BLOCK_THR_INIT: { + // We need to wait for a multiple conditions to become true + // until we can initialize the Block decoder and let a worker + // thread decode it: + // + // - Wait for the memory usage of the active threads to drop + // so that starting the decoding of this Block won't make + // us go over memlimit_threading. + // + // - Wait for at least one free output queue slot. + // + // - Wait for a free worker thread. + // + // While we wait, we must copy decompressed data to the out + // buffer and catch possible decoder errors. + // + // read_output_and_wait() does all the above. + bool block_can_start = false; + + return_if_error(read_output_and_wait(coder, allocator, + out, out_pos, out_size, + &block_can_start, true, + &wait_abs, &has_blocked)); + + if (coder->pending_error != LZMA_OK) { + coder->sequence = SEQ_ERROR; + break; + } + + if (!block_can_start) { + // It's not a timeout because return_if_error handles + // it already. Output queue cannot be empty either + // because in that case block_can_start would have + // been true. Thus the output buffer must be full and + // the queue isn't empty. + assert(*out_pos == out_size); + assert(!lzma_outq_is_empty(&coder->outq)); + return LZMA_OK; + } + + // We know that we can start decoding this Block without + // exceeding memlimit_threading. However, to stay below + // memlimit_threading may require freeing some of the + // cached memory. + // + // Get a local copy of variables that require locking the + // mutex. It is fine if the worker threads modify the real + // values after we read these as those changes can only be + // towards more favorable conditions (less memory in use, + // more in cache). + uint64_t mem_in_use; + uint64_t mem_cached; + struct worker_thread *thr = NULL; // Init to silence warning. + + mythread_sync(coder->mutex) { + mem_in_use = coder->mem_in_use; + mem_cached = coder->mem_cached; + thr = coder->threads_free; + } + + // The maximum amount of memory that can be held by other + // threads and cached buffers while allowing us to start + // decoding the next Block. + const uint64_t mem_max = coder->memlimit_threading + - coder->mem_next_block; + + // If the existing allocations are so large that starting + // to decode this Block might exceed memlimit_threads, + // try to free memory from the output queue cache first. + // + // NOTE: This math assumes the worst case. It's possible + // that the limit wouldn't be exceeded if the existing cached + // allocations are reused. + if (mem_in_use + mem_cached + coder->outq.mem_allocated + > mem_max) { + // Clear the outq cache except leave one buffer in + // the cache if its size is correct. That way we + // don't free and almost immediately reallocate + // an identical buffer. + lzma_outq_clear_cache2(&coder->outq, allocator, + coder->block_options.uncompressed_size); + } + + // If there is at least one worker_thread in the cache and + // the existing allocations are so large that starting to + // decode this Block might exceed memlimit_threads, free + // memory by freeing cached Block decoders. + // + // NOTE: The comparison is different here than above. + // Here we don't care about cached buffers in outq anymore + // and only look at memory actually in use. This is because + // if there is something in outq cache, it's a single buffer + // that can be used as is. We ensured this in the above + // if-block. + uint64_t mem_freed = 0; + if (thr != NULL && mem_in_use + mem_cached + + coder->outq.mem_in_use > mem_max) { + // Don't free the first Block decoder if its memory + // usage isn't greater than what this Block will need. + // Typically the same filter chain is used for all + // Blocks so this way the allocations can be reused + // when get_thread() picks the first worker_thread + // from the cache. + if (thr->mem_filters <= coder->mem_next_filters) + thr = thr->next; + + while (thr != NULL) { + lzma_next_end(&thr->block_decoder, allocator); + mem_freed += thr->mem_filters; + thr->mem_filters = 0; + thr = thr->next; + } + } + + // Update the memory usage counters. Note that coder->mem_* + // may have changed since we read them so we must substract + // or add the changes. + mythread_sync(coder->mutex) { + coder->mem_cached -= mem_freed; + + // Memory needed for the filters and the input buffer. + // The output queue takes care of its own counter so + // we don't touch it here. + // + // NOTE: After this, coder->mem_in_use + + // coder->mem_cached might count the same thing twice. + // If so, this will get corrected in get_thread() when + // a worker_thread is picked from coder->free_threads + // and its memory usage is substracted from mem_cached. + coder->mem_in_use += coder->mem_next_in + + coder->mem_next_filters; + } + + // Allocate memory for the output buffer in the output queue. + lzma_ret ret = lzma_outq_prealloc_buf( + &coder->outq, allocator, + coder->block_options.uncompressed_size); + if (ret != LZMA_OK) { + threads_stop(coder); + return ret; + } + + // Set up coder->thr. + ret = get_thread(coder, allocator); + if (ret != LZMA_OK) { + threads_stop(coder); + return ret; + } + + // The new Block decoder memory usage is already counted in + // coder->mem_in_use. Store it in the thread too. + coder->thr->mem_filters = coder->mem_next_filters; + + // Initialize the Block decoder. + coder->thr->block_options = coder->block_options; + ret = lzma_block_decoder_init( + &coder->thr->block_decoder, allocator, + &coder->thr->block_options); + + // Free the allocated filter options since they are needed + // only to initialize the Block decoder. + lzma_filters_free(coder->filters, allocator); + coder->thr->block_options.filters = NULL; + + // Check if memory usage calculation and Block encoder + // initialization succeeded. + if (ret != LZMA_OK) { + coder->pending_error = ret; + coder->sequence = SEQ_ERROR; + break; + } + + // Allocate the input buffer. + coder->thr->in_size = coder->mem_next_in; + coder->thr->in = lzma_alloc(coder->thr->in_size, allocator); + if (coder->thr->in == NULL) { + threads_stop(coder); + return LZMA_MEM_ERROR; + } + + // Get the preallocated output buffer. + coder->thr->outbuf = lzma_outq_get_buf( + &coder->outq, coder->thr); + + // Start the decoder. + mythread_sync(coder->thr->mutex) { + assert(coder->thr->state == THR_IDLE); + coder->thr->state = THR_RUN; + mythread_cond_signal(&coder->thr->cond); + } + + // Enable output from the thread that holds the oldest output + // buffer in the output queue (if such a thread exists). + mythread_sync(coder->mutex) { + lzma_outq_enable_partial_output(&coder->outq, + &worker_enable_partial_update); + } + + coder->sequence = SEQ_BLOCK_THR_RUN; + } + + // Fall through + + case SEQ_BLOCK_THR_RUN: { + if (action == LZMA_FINISH && coder->fail_fast) { + // We know that we won't get more input and that + // the caller wants fail-fast behavior. If we see + // that we don't have enough input to finish this + // Block, return LZMA_DATA_ERROR immediately. + // See SEQ_BLOCK_HEADER for the error code rationale. + const size_t in_avail = in_size - *in_pos; + const size_t in_needed = coder->thr->in_size + - coder->thr->in_filled; + if (in_avail < in_needed) { + threads_stop(coder); + return LZMA_DATA_ERROR; + } + } + + // Copy input to the worker thread. + size_t cur_in_filled = coder->thr->in_filled; + lzma_bufcpy(in, in_pos, in_size, coder->thr->in, + &cur_in_filled, coder->thr->in_size); + + // Tell the thread how much we copied. + mythread_sync(coder->thr->mutex) { + coder->thr->in_filled = cur_in_filled; + + // NOTE: Most of the time we are copying input faster + // than the thread can decode so most of the time + // calling mythread_cond_signal() is useless but + // we cannot make it conditional because thr->in_pos + // is updated without a mutex. And the overhead should + // be very much negligible anyway. + mythread_cond_signal(&coder->thr->cond); + } + + // Read output from the output queue. Just like in + // SEQ_BLOCK_HEADER, we wait to fill the output buffer + // only if waiting_allowed was set to true in the beginning + // of this function (see the comment there). + return_if_error(read_output_and_wait(coder, allocator, + out, out_pos, out_size, + NULL, waiting_allowed, + &wait_abs, &has_blocked)); + + if (coder->pending_error != LZMA_OK) { + coder->sequence = SEQ_ERROR; + break; + } + + // Return if the input didn't contain the whole Block. + if (coder->thr->in_filled < coder->thr->in_size) { + assert(*in_pos == in_size); + return LZMA_OK; + } + + // The whole Block has been copied to the thread-specific + // buffer. Continue from the next Block Header or Index. + coder->thr = NULL; + coder->sequence = SEQ_BLOCK_HEADER; + break; + } + + case SEQ_BLOCK_DIRECT_INIT: { + // Wait for the threads to finish and that all decoded data + // has been copied to the output. That is, wait until the + // output queue becomes empty. + // + // NOTE: No need to check for coder->pending_error as + // we aren't consuming any input until the queue is empty + // and if there is a pending error, read_output_and_wait() + // will eventually return it before the queue is empty. + return_if_error(read_output_and_wait(coder, allocator, + out, out_pos, out_size, + NULL, true, &wait_abs, &has_blocked)); + if (!lzma_outq_is_empty(&coder->outq)) + return LZMA_OK; + + // Free the cached output buffers. + lzma_outq_clear_cache(&coder->outq, allocator); + + // Get rid of the worker threads, including the coder->threads + // array. + threads_end(coder, allocator); + + // Initialize the Block decoder. + const lzma_ret ret = lzma_block_decoder_init( + &coder->block_decoder, allocator, + &coder->block_options); + + // Free the allocated filter options since they are needed + // only to initialize the Block decoder. + lzma_filters_free(coder->filters, allocator); + coder->block_options.filters = NULL; + + // Check if Block decoder initialization succeeded. + if (ret != LZMA_OK) + return ret; + + // Make the memory usage visible to _memconfig(). + coder->mem_direct_mode = coder->mem_next_filters; + + coder->sequence = SEQ_BLOCK_DIRECT_RUN; + } + + // Fall through + + case SEQ_BLOCK_DIRECT_RUN: { + const size_t in_old = *in_pos; + const size_t out_old = *out_pos; + const lzma_ret ret = coder->block_decoder.code( + coder->block_decoder.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, + action); + coder->progress_in += *in_pos - in_old; + coder->progress_out += *out_pos - out_old; + + if (ret != LZMA_STREAM_END) + return ret; + + // Block decoded successfully. Add the new size pair to + // the Index hash. + return_if_error(lzma_index_hash_append(coder->index_hash, + lzma_block_unpadded_size( + &coder->block_options), + coder->block_options.uncompressed_size)); + + coder->sequence = SEQ_BLOCK_HEADER; + break; + } + + case SEQ_INDEX_WAIT_OUTPUT: + // Flush the output from all worker threads so that we can + // decode the Index without thinking about threading. + return_if_error(read_output_and_wait(coder, allocator, + out, out_pos, out_size, + NULL, true, &wait_abs, &has_blocked)); + + if (!lzma_outq_is_empty(&coder->outq)) + return LZMA_OK; + + coder->sequence = SEQ_INDEX_DECODE; + + // Fall through + + case SEQ_INDEX_DECODE: { + // If we don't have any input, don't call + // lzma_index_hash_decode() since it would return + // LZMA_BUF_ERROR, which we must not do here. + if (*in_pos >= in_size) + return LZMA_OK; + + // Decode the Index and compare it to the hash calculated + // from the sizes of the Blocks (if any). + const size_t in_old = *in_pos; + const lzma_ret ret = lzma_index_hash_decode(coder->index_hash, + in, in_pos, in_size); + coder->progress_in += *in_pos - in_old; + if (ret != LZMA_STREAM_END) + return ret; + + coder->sequence = SEQ_STREAM_FOOTER; + } + + // Fall through + + case SEQ_STREAM_FOOTER: { + // Copy the Stream Footer to the internal buffer. + const size_t in_old = *in_pos; + lzma_bufcpy(in, in_pos, in_size, coder->buffer, &coder->pos, + LZMA_STREAM_HEADER_SIZE); + coder->progress_in += *in_pos - in_old; + + // Return if we didn't get the whole Stream Footer yet. + if (coder->pos < LZMA_STREAM_HEADER_SIZE) + return LZMA_OK; + + coder->pos = 0; + + // Decode the Stream Footer. The decoder gives + // LZMA_FORMAT_ERROR if the magic bytes don't match, + // so convert that return code to LZMA_DATA_ERROR. + lzma_stream_flags footer_flags; + const lzma_ret ret = lzma_stream_footer_decode( + &footer_flags, coder->buffer); + if (ret != LZMA_OK) + return ret == LZMA_FORMAT_ERROR + ? LZMA_DATA_ERROR : ret; + + // Check that Index Size stored in the Stream Footer matches + // the real size of the Index field. + if (lzma_index_hash_size(coder->index_hash) + != footer_flags.backward_size) + return LZMA_DATA_ERROR; + + // Compare that the Stream Flags fields are identical in + // both Stream Header and Stream Footer. + return_if_error(lzma_stream_flags_compare( + &coder->stream_flags, &footer_flags)); + + if (!coder->concatenated) + return LZMA_STREAM_END; + + coder->sequence = SEQ_STREAM_PADDING; + } + + // Fall through + + case SEQ_STREAM_PADDING: + assert(coder->concatenated); + + // Skip over possible Stream Padding. + while (true) { + if (*in_pos >= in_size) { + // Unless LZMA_FINISH was used, we cannot + // know if there's more input coming later. + if (action != LZMA_FINISH) + return LZMA_OK; + + // Stream Padding must be a multiple of + // four bytes. + return coder->pos == 0 + ? LZMA_STREAM_END + : LZMA_DATA_ERROR; + } + + // If the byte is not zero, it probably indicates + // beginning of a new Stream (or the file is corrupt). + if (in[*in_pos] != 0x00) + break; + + ++*in_pos; + ++coder->progress_in; + coder->pos = (coder->pos + 1) & 3; + } + + // Stream Padding must be a multiple of four bytes (empty + // Stream Padding is OK). + if (coder->pos != 0) { + ++*in_pos; + ++coder->progress_in; + return LZMA_DATA_ERROR; + } + + // Prepare to decode the next Stream. + return_if_error(stream_decoder_reset(coder, allocator)); + break; + + case SEQ_ERROR: + if (!coder->fail_fast) { + // Let the application get all data before the point + // where the error was detected. This matches the + // behavior of single-threaded use. + // + // FIXME? Some errors (LZMA_MEM_ERROR) don't get here, + // they are returned immediately. Thus in rare cases + // the output will be less than in the single-threaded + // mode. Maybe this doesn't matter much in practice. + return_if_error(read_output_and_wait(coder, allocator, + out, out_pos, out_size, + NULL, true, &wait_abs, &has_blocked)); + + // We get here only if the error happened in the main + // thread, for example, unsupported Block Header. + if (!lzma_outq_is_empty(&coder->outq)) + return LZMA_OK; + } + + // We only get here if no errors were detected by the worker + // threads. Errors from worker threads would have already been + // returned by the call to read_output_and_wait() above. + return coder->pending_error; + + default: + assert(0); + return LZMA_PROG_ERROR; + } + + // Never reached +} + + +static void +stream_decoder_mt_end(void *coder_ptr, const lzma_allocator *allocator) +{ + struct lzma_stream_coder *coder = coder_ptr; + + threads_end(coder, allocator); + lzma_outq_end(&coder->outq, allocator); + + lzma_next_end(&coder->block_decoder, allocator); + lzma_filters_free(coder->filters, allocator); + lzma_index_hash_end(coder->index_hash, allocator); + + lzma_free(coder, allocator); + return; +} + + +static lzma_check +stream_decoder_mt_get_check(const void *coder_ptr) +{ + const struct lzma_stream_coder *coder = coder_ptr; + return coder->stream_flags.check; +} + + +static lzma_ret +stream_decoder_mt_memconfig(void *coder_ptr, uint64_t *memusage, + uint64_t *old_memlimit, uint64_t new_memlimit) +{ + // NOTE: This function gets/sets memlimit_stop. For now, + // memlimit_threading cannot be modified after initialization. + // + // *memusage will include cached memory too. Excluding cached memory + // would be misleading and it wouldn't help the applications to + // know how much memory is actually needed to decompress the file + // because the higher the number of threads and the memlimits are + // the more memory the decoder may use. + // + // Setting a new limit includes the cached memory too and too low + // limits will be rejected. Alternative could be to free the cached + // memory immediately if that helps to bring the limit down but + // the current way is the simplest. It's unlikely that limit needs + // to be lowered in the middle of a file anyway; the typical reason + // to want a new limit is to increase after LZMA_MEMLIMIT_ERROR + // and even such use isn't common. + struct lzma_stream_coder *coder = coder_ptr; + + mythread_sync(coder->mutex) { + *memusage = coder->mem_direct_mode + + coder->mem_in_use + + coder->mem_cached + + coder->outq.mem_allocated; + } + + // If no filter chains are allocated, *memusage may be zero. + // Always return at least LZMA_MEMUSAGE_BASE. + if (*memusage < LZMA_MEMUSAGE_BASE) + *memusage = LZMA_MEMUSAGE_BASE; + + *old_memlimit = coder->memlimit_stop; + + if (new_memlimit != 0) { + if (new_memlimit < *memusage) + return LZMA_MEMLIMIT_ERROR; + + coder->memlimit_stop = new_memlimit; + } + + return LZMA_OK; +} + + +static void +stream_decoder_mt_get_progress(void *coder_ptr, + uint64_t *progress_in, uint64_t *progress_out) +{ + struct lzma_stream_coder *coder = coder_ptr; + + // Lock coder->mutex to prevent finishing threads from moving their + // progress info from the worker_thread structure to lzma_stream_coder. + mythread_sync(coder->mutex) { + *progress_in = coder->progress_in; + *progress_out = coder->progress_out; + + for (size_t i = 0; i < coder->threads_initialized; ++i) { + mythread_sync(coder->threads[i].mutex) { + *progress_in += coder->threads[i].progress_in; + *progress_out += coder->threads[i] + .progress_out; + } + } + } + + return; +} + + +static lzma_ret +stream_decoder_mt_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_mt *options) +{ + struct lzma_stream_coder *coder; + + if (options->threads == 0 || options->threads > LZMA_THREADS_MAX) + return LZMA_OPTIONS_ERROR; + + if (options->flags & ~LZMA_SUPPORTED_FLAGS) + return LZMA_OPTIONS_ERROR; + + lzma_next_coder_init(&stream_decoder_mt_init, next, allocator); + + coder = next->coder; + if (!coder) { + coder = lzma_alloc(sizeof(struct lzma_stream_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + + if (mythread_mutex_init(&coder->mutex)) { + lzma_free(coder, allocator); + return LZMA_MEM_ERROR; + } + + if (mythread_cond_init(&coder->cond)) { + mythread_mutex_destroy(&coder->mutex); + lzma_free(coder, allocator); + return LZMA_MEM_ERROR; + } + + next->code = &stream_decode_mt; + next->end = &stream_decoder_mt_end; + next->get_check = &stream_decoder_mt_get_check; + next->memconfig = &stream_decoder_mt_memconfig; + next->get_progress = &stream_decoder_mt_get_progress; + + coder->filters[0].id = LZMA_VLI_UNKNOWN; + memzero(&coder->outq, sizeof(coder->outq)); + + coder->block_decoder = LZMA_NEXT_CODER_INIT; + coder->mem_direct_mode = 0; + + coder->index_hash = NULL; + coder->threads = NULL; + coder->threads_free = NULL; + coder->threads_initialized = 0; + } + + // Cleanup old filter chain if one remains after unfinished decoding + // of a previous Stream. + lzma_filters_free(coder->filters, allocator); + + // By allocating threads from scratch we can start memory-usage + // accounting from scratch, too. Changes in filter and block sizes may + // affect number of threads. + // + // FIXME? Reusing should be easy but unlike the single-threaded + // decoder, with some types of input file combinations reusing + // could leave quite a lot of memory allocated but unused (first + // file could allocate a lot, the next files could use fewer + // threads and some of the allocations from the first file would not + // get freed unless memlimit_threading forces us to clear caches). + // + // NOTE: The direct mode decoder isn't freed here if one exists. + // It will be reused or freed as needed in the main loop. + threads_end(coder, allocator); + + // All memusage counters start at 0 (including mem_direct_mode). + // The little extra that is needed for the structs in this file + // get accounted well enough by the filter chain memory usage + // which adds LZMA_MEMUSAGE_BASE for each chain. However, + // stream_decoder_mt_memconfig() has to handle this specially so that + // it will never return less than LZMA_MEMUSAGE_BASE as memory usage. + coder->mem_in_use = 0; + coder->mem_cached = 0; + coder->mem_next_block = 0; + + coder->progress_in = 0; + coder->progress_out = 0; + + coder->sequence = SEQ_STREAM_HEADER; + coder->thread_error = LZMA_OK; + coder->pending_error = LZMA_OK; + coder->thr = NULL; + + coder->timeout = options->timeout; + + coder->memlimit_threading = my_max(1, options->memlimit_threading); + coder->memlimit_stop = my_max(1, options->memlimit_stop); + if (coder->memlimit_threading > coder->memlimit_stop) + coder->memlimit_threading = coder->memlimit_stop; + + coder->tell_no_check = (options->flags & LZMA_TELL_NO_CHECK) != 0; + coder->tell_unsupported_check + = (options->flags & LZMA_TELL_UNSUPPORTED_CHECK) != 0; + coder->tell_any_check = (options->flags & LZMA_TELL_ANY_CHECK) != 0; + coder->ignore_check = (options->flags & LZMA_IGNORE_CHECK) != 0; + coder->concatenated = (options->flags & LZMA_CONCATENATED) != 0; + coder->fail_fast = (options->flags & LZMA_FAIL_FAST) != 0; + + coder->first_stream = true; + coder->out_was_filled = false; + coder->pos = 0; + + coder->threads_max = options->threads; + + return_if_error(lzma_outq_init(&coder->outq, allocator, + coder->threads_max)); + + return stream_decoder_reset(coder, allocator); +} + + +extern LZMA_API(lzma_ret) +lzma_stream_decoder_mt(lzma_stream *strm, const lzma_mt *options) +{ + lzma_next_strm_init(stream_decoder_mt_init, strm, options); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/stream_encoder.c b/src/liblzma/common/stream_encoder.c new file mode 100644 index 0000000..ee92046 --- /dev/null +++ b/src/liblzma/common/stream_encoder.c @@ -0,0 +1,355 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_encoder.c +/// \brief Encodes .xz Streams +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "block_encoder.h" +#include "index_encoder.h" + + +typedef struct { + enum { + SEQ_STREAM_HEADER, + SEQ_BLOCK_INIT, + SEQ_BLOCK_HEADER, + SEQ_BLOCK_ENCODE, + SEQ_INDEX_ENCODE, + SEQ_STREAM_FOOTER, + } sequence; + + /// True if Block encoder has been initialized by + /// stream_encoder_init() or stream_encoder_update() + /// and thus doesn't need to be initialized in stream_encode(). + bool block_encoder_is_initialized; + + /// Block + lzma_next_coder block_encoder; + + /// Options for the Block encoder + lzma_block block_options; + + /// The filter chain currently in use + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + + /// Index encoder. This is separate from Block encoder, because this + /// doesn't take much memory, and when encoding multiple Streams + /// with the same encoding options we avoid reallocating memory. + lzma_next_coder index_encoder; + + /// Index to hold sizes of the Blocks + lzma_index *index; + + /// Read position in buffer[] + size_t buffer_pos; + + /// Total number of bytes in buffer[] + size_t buffer_size; + + /// Buffer to hold Stream Header, Block Header, and Stream Footer. + /// Block Header has biggest maximum size. + uint8_t buffer[LZMA_BLOCK_HEADER_SIZE_MAX]; +} lzma_stream_coder; + + +static lzma_ret +block_encoder_init(lzma_stream_coder *coder, const lzma_allocator *allocator) +{ + // Prepare the Block options. Even though Block encoder doesn't need + // compressed_size, uncompressed_size, and header_size to be + // initialized, it is a good idea to do it here, because this way + // we catch if someone gave us Filter ID that cannot be used in + // Blocks/Streams. + coder->block_options.compressed_size = LZMA_VLI_UNKNOWN; + coder->block_options.uncompressed_size = LZMA_VLI_UNKNOWN; + + return_if_error(lzma_block_header_size(&coder->block_options)); + + // Initialize the actual Block encoder. + return lzma_block_encoder_init(&coder->block_encoder, allocator, + &coder->block_options); +} + + +static lzma_ret +stream_encode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_stream_coder *coder = coder_ptr; + + // Main loop + while (*out_pos < out_size) + switch (coder->sequence) { + case SEQ_STREAM_HEADER: + case SEQ_BLOCK_HEADER: + case SEQ_STREAM_FOOTER: + lzma_bufcpy(coder->buffer, &coder->buffer_pos, + coder->buffer_size, out, out_pos, out_size); + if (coder->buffer_pos < coder->buffer_size) + return LZMA_OK; + + if (coder->sequence == SEQ_STREAM_FOOTER) + return LZMA_STREAM_END; + + coder->buffer_pos = 0; + ++coder->sequence; + break; + + case SEQ_BLOCK_INIT: { + if (*in_pos == in_size) { + // If we are requested to flush or finish the current + // Block, return LZMA_STREAM_END immediately since + // there's nothing to do. + if (action != LZMA_FINISH) + return action == LZMA_RUN + ? LZMA_OK : LZMA_STREAM_END; + + // The application had used LZMA_FULL_FLUSH to finish + // the previous Block, but now wants to finish without + // encoding new data, or it is simply creating an + // empty Stream with no Blocks. + // + // Initialize the Index encoder, and continue to + // actually encoding the Index. + return_if_error(lzma_index_encoder_init( + &coder->index_encoder, allocator, + coder->index)); + coder->sequence = SEQ_INDEX_ENCODE; + break; + } + + // Initialize the Block encoder unless it was already + // initialized by stream_encoder_init() or + // stream_encoder_update(). + if (!coder->block_encoder_is_initialized) + return_if_error(block_encoder_init(coder, allocator)); + + // Make it false so that we don't skip the initialization + // with the next Block. + coder->block_encoder_is_initialized = false; + + // Encode the Block Header. This shouldn't fail since we have + // already initialized the Block encoder. + if (lzma_block_header_encode(&coder->block_options, + coder->buffer) != LZMA_OK) + return LZMA_PROG_ERROR; + + coder->buffer_size = coder->block_options.header_size; + coder->sequence = SEQ_BLOCK_HEADER; + break; + } + + case SEQ_BLOCK_ENCODE: { + static const lzma_action convert[LZMA_ACTION_MAX + 1] = { + LZMA_RUN, + LZMA_SYNC_FLUSH, + LZMA_FINISH, + LZMA_FINISH, + LZMA_FINISH, + }; + + const lzma_ret ret = coder->block_encoder.code( + coder->block_encoder.coder, allocator, + in, in_pos, in_size, + out, out_pos, out_size, convert[action]); + if (ret != LZMA_STREAM_END || action == LZMA_SYNC_FLUSH) + return ret; + + // Add a new Index Record. + const lzma_vli unpadded_size = lzma_block_unpadded_size( + &coder->block_options); + assert(unpadded_size != 0); + return_if_error(lzma_index_append(coder->index, allocator, + unpadded_size, + coder->block_options.uncompressed_size)); + + coder->sequence = SEQ_BLOCK_INIT; + break; + } + + case SEQ_INDEX_ENCODE: { + // Call the Index encoder. It doesn't take any input, so + // those pointers can be NULL. + const lzma_ret ret = coder->index_encoder.code( + coder->index_encoder.coder, allocator, + NULL, NULL, 0, + out, out_pos, out_size, LZMA_RUN); + if (ret != LZMA_STREAM_END) + return ret; + + // Encode the Stream Footer into coder->buffer. + const lzma_stream_flags stream_flags = { + .version = 0, + .backward_size = lzma_index_size(coder->index), + .check = coder->block_options.check, + }; + + if (lzma_stream_footer_encode(&stream_flags, coder->buffer) + != LZMA_OK) + return LZMA_PROG_ERROR; + + coder->buffer_size = LZMA_STREAM_HEADER_SIZE; + coder->sequence = SEQ_STREAM_FOOTER; + break; + } + + default: + assert(0); + return LZMA_PROG_ERROR; + } + + return LZMA_OK; +} + + +static void +stream_encoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_stream_coder *coder = coder_ptr; + + lzma_next_end(&coder->block_encoder, allocator); + lzma_next_end(&coder->index_encoder, allocator); + lzma_index_end(coder->index, allocator); + + lzma_filters_free(coder->filters, allocator); + + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +stream_encoder_update(void *coder_ptr, const lzma_allocator *allocator, + const lzma_filter *filters, + const lzma_filter *reversed_filters) +{ + lzma_stream_coder *coder = coder_ptr; + lzma_ret ret; + + // Make a copy to a temporary buffer first. This way it is easier + // to keep the encoder state unchanged if an error occurs with + // lzma_filters_copy(). + lzma_filter temp[LZMA_FILTERS_MAX + 1]; + return_if_error(lzma_filters_copy(filters, temp, allocator)); + + if (coder->sequence <= SEQ_BLOCK_INIT) { + // There is no incomplete Block waiting to be finished, + // thus we can change the whole filter chain. Start by + // trying to initialize the Block encoder with the new + // chain. This way we detect if the chain is valid. + coder->block_encoder_is_initialized = false; + coder->block_options.filters = temp; + ret = block_encoder_init(coder, allocator); + coder->block_options.filters = coder->filters; + if (ret != LZMA_OK) + goto error; + + coder->block_encoder_is_initialized = true; + + } else if (coder->sequence <= SEQ_BLOCK_ENCODE) { + // We are in the middle of a Block. Try to update only + // the filter-specific options. + ret = coder->block_encoder.update( + coder->block_encoder.coder, allocator, + filters, reversed_filters); + if (ret != LZMA_OK) + goto error; + } else { + // Trying to update the filter chain when we are already + // encoding Index or Stream Footer. + ret = LZMA_PROG_ERROR; + goto error; + } + + // Free the options of the old chain. + lzma_filters_free(coder->filters, allocator); + + // Copy the new filter chain in place. + memcpy(coder->filters, temp, sizeof(temp)); + + return LZMA_OK; + +error: + lzma_filters_free(temp, allocator); + return ret; +} + + +static lzma_ret +stream_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter *filters, lzma_check check) +{ + lzma_next_coder_init(&stream_encoder_init, next, allocator); + + if (filters == NULL) + return LZMA_PROG_ERROR; + + lzma_stream_coder *coder = next->coder; + + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_stream_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &stream_encode; + next->end = &stream_encoder_end; + next->update = &stream_encoder_update; + + coder->filters[0].id = LZMA_VLI_UNKNOWN; + coder->block_encoder = LZMA_NEXT_CODER_INIT; + coder->index_encoder = LZMA_NEXT_CODER_INIT; + coder->index = NULL; + } + + // Basic initializations + coder->sequence = SEQ_STREAM_HEADER; + coder->block_options.version = 0; + coder->block_options.check = check; + + // Initialize the Index + lzma_index_end(coder->index, allocator); + coder->index = lzma_index_init(allocator); + if (coder->index == NULL) + return LZMA_MEM_ERROR; + + // Encode the Stream Header + lzma_stream_flags stream_flags = { + .version = 0, + .check = check, + }; + return_if_error(lzma_stream_header_encode( + &stream_flags, coder->buffer)); + + coder->buffer_pos = 0; + coder->buffer_size = LZMA_STREAM_HEADER_SIZE; + + // Initialize the Block encoder. This way we detect unsupported + // filter chains when initializing the Stream encoder instead of + // giving an error after Stream Header has already been written out. + return stream_encoder_update(coder, allocator, filters, NULL); +} + + +extern LZMA_API(lzma_ret) +lzma_stream_encoder(lzma_stream *strm, + const lzma_filter *filters, lzma_check check) +{ + lzma_next_strm_init(stream_encoder_init, strm, filters, check); + + strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_SYNC_FLUSH] = true; + strm->internal->supported_actions[LZMA_FULL_FLUSH] = true; + strm->internal->supported_actions[LZMA_FULL_BARRIER] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} diff --git a/src/liblzma/common/stream_encoder_mt.c b/src/liblzma/common/stream_encoder_mt.c new file mode 100644 index 0000000..f4497c1 --- /dev/null +++ b/src/liblzma/common/stream_encoder_mt.c @@ -0,0 +1,1283 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_encoder_mt.c +/// \brief Multithreaded .xz Stream encoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_encoder.h" +#include "easy_preset.h" +#include "block_encoder.h" +#include "block_buffer_encoder.h" +#include "index_encoder.h" +#include "outqueue.h" + + +/// Maximum supported block size. This makes it simpler to prevent integer +/// overflows if we are given unusually large block size. +#define BLOCK_SIZE_MAX (UINT64_MAX / LZMA_THREADS_MAX) + + +typedef enum { + /// Waiting for work. + THR_IDLE, + + /// Encoding is in progress. + THR_RUN, + + /// Encoding is in progress but no more input data will + /// be read. + THR_FINISH, + + /// The main thread wants the thread to stop whatever it was doing + /// but not exit. + THR_STOP, + + /// The main thread wants the thread to exit. We could use + /// cancellation but since there's stopped anyway, this is lazier. + THR_EXIT, + +} worker_state; + +typedef struct lzma_stream_coder_s lzma_stream_coder; + +typedef struct worker_thread_s worker_thread; +struct worker_thread_s { + worker_state state; + + /// Input buffer of coder->block_size bytes. The main thread will + /// put new input into this and update in_size accordingly. Once + /// no more input is coming, state will be set to THR_FINISH. + uint8_t *in; + + /// Amount of data available in the input buffer. This is modified + /// only by the main thread. + size_t in_size; + + /// Output buffer for this thread. This is set by the main + /// thread every time a new Block is started with this thread + /// structure. + lzma_outbuf *outbuf; + + /// Pointer to the main structure is needed when putting this + /// thread back to the stack of free threads. + lzma_stream_coder *coder; + + /// The allocator is set by the main thread. Since a copy of the + /// pointer is kept here, the application must not change the + /// allocator before calling lzma_end(). + const lzma_allocator *allocator; + + /// Amount of uncompressed data that has already been compressed. + uint64_t progress_in; + + /// Amount of compressed data that is ready. + uint64_t progress_out; + + /// Block encoder + lzma_next_coder block_encoder; + + /// Compression options for this Block + lzma_block block_options; + + /// Filter chain for this thread. By copying the filters array + /// to each thread it is possible to change the filter chain + /// between Blocks using lzma_filters_update(). + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + + /// Next structure in the stack of free worker threads. + worker_thread *next; + + mythread_mutex mutex; + mythread_cond cond; + + /// The ID of this thread is used to join the thread + /// when it's not needed anymore. + mythread thread_id; +}; + + +struct lzma_stream_coder_s { + enum { + SEQ_STREAM_HEADER, + SEQ_BLOCK, + SEQ_INDEX, + SEQ_STREAM_FOOTER, + } sequence; + + /// Start a new Block every block_size bytes of input unless + /// LZMA_FULL_FLUSH or LZMA_FULL_BARRIER is used earlier. + size_t block_size; + + /// The filter chain to use for the next Block. + /// This can be updated using lzma_filters_update() + /// after LZMA_FULL_BARRIER or LZMA_FULL_FLUSH. + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + + /// A copy of filters[] will be put here when attempting to get + /// a new worker thread. This will be copied to a worker thread + /// when a thread becomes free and then this cache is marked as + /// empty by setting [0].id = LZMA_VLI_UNKNOWN. Without this cache + /// the filter options from filters[] would get uselessly copied + /// multiple times (allocated and freed) when waiting for a new free + /// worker thread. + /// + /// This is freed if filters[] is updated via lzma_filters_update(). + lzma_filter filters_cache[LZMA_FILTERS_MAX + 1]; + + + /// Index to hold sizes of the Blocks + lzma_index *index; + + /// Index encoder + lzma_next_coder index_encoder; + + + /// Stream Flags for encoding the Stream Header and Stream Footer. + lzma_stream_flags stream_flags; + + /// Buffer to hold Stream Header and Stream Footer. + uint8_t header[LZMA_STREAM_HEADER_SIZE]; + + /// Read position in header[] + size_t header_pos; + + + /// Output buffer queue for compressed data + lzma_outq outq; + + /// How much memory to allocate for each lzma_outbuf.buf + size_t outbuf_alloc_size; + + + /// Maximum wait time if cannot use all the input and cannot + /// fill the output buffer. This is in milliseconds. + uint32_t timeout; + + + /// Error code from a worker thread + lzma_ret thread_error; + + /// Array of allocated thread-specific structures + worker_thread *threads; + + /// Number of structures in "threads" above. This is also the + /// number of threads that will be created at maximum. + uint32_t threads_max; + + /// Number of thread structures that have been initialized, and + /// thus the number of worker threads actually created so far. + uint32_t threads_initialized; + + /// Stack of free threads. When a thread finishes, it puts itself + /// back into this stack. This starts as empty because threads + /// are created only when actually needed. + worker_thread *threads_free; + + /// The most recent worker thread to which the main thread writes + /// the new input from the application. + worker_thread *thr; + + + /// Amount of uncompressed data in Blocks that have already + /// been finished. + uint64_t progress_in; + + /// Amount of compressed data in Stream Header + Blocks that + /// have already been finished. + uint64_t progress_out; + + + mythread_mutex mutex; + mythread_cond cond; +}; + + +/// Tell the main thread that something has gone wrong. +static void +worker_error(worker_thread *thr, lzma_ret ret) +{ + assert(ret != LZMA_OK); + assert(ret != LZMA_STREAM_END); + + mythread_sync(thr->coder->mutex) { + if (thr->coder->thread_error == LZMA_OK) + thr->coder->thread_error = ret; + + mythread_cond_signal(&thr->coder->cond); + } + + return; +} + + +static worker_state +worker_encode(worker_thread *thr, size_t *out_pos, worker_state state) +{ + assert(thr->progress_in == 0); + assert(thr->progress_out == 0); + + // Set the Block options. + thr->block_options = (lzma_block){ + .version = 0, + .check = thr->coder->stream_flags.check, + .compressed_size = thr->outbuf->allocated, + .uncompressed_size = thr->coder->block_size, + .filters = thr->filters, + }; + + // Calculate maximum size of the Block Header. This amount is + // reserved in the beginning of the buffer so that Block Header + // along with Compressed Size and Uncompressed Size can be + // written there. + lzma_ret ret = lzma_block_header_size(&thr->block_options); + if (ret != LZMA_OK) { + worker_error(thr, ret); + return THR_STOP; + } + + // Initialize the Block encoder. + ret = lzma_block_encoder_init(&thr->block_encoder, + thr->allocator, &thr->block_options); + if (ret != LZMA_OK) { + worker_error(thr, ret); + return THR_STOP; + } + + size_t in_pos = 0; + size_t in_size = 0; + + *out_pos = thr->block_options.header_size; + const size_t out_size = thr->outbuf->allocated; + + do { + mythread_sync(thr->mutex) { + // Store in_pos and *out_pos into *thr so that + // an application may read them via + // lzma_get_progress() to get progress information. + // + // NOTE: These aren't updated when the encoding + // finishes. Instead, the final values are taken + // later from thr->outbuf. + thr->progress_in = in_pos; + thr->progress_out = *out_pos; + + while (in_size == thr->in_size + && thr->state == THR_RUN) + mythread_cond_wait(&thr->cond, &thr->mutex); + + state = thr->state; + in_size = thr->in_size; + } + + // Return if we were asked to stop or exit. + if (state >= THR_STOP) + return state; + + lzma_action action = state == THR_FINISH + ? LZMA_FINISH : LZMA_RUN; + + // Limit the amount of input given to the Block encoder + // at once. This way this thread can react fairly quickly + // if the main thread wants us to stop or exit. + static const size_t in_chunk_max = 16384; + size_t in_limit = in_size; + if (in_size - in_pos > in_chunk_max) { + in_limit = in_pos + in_chunk_max; + action = LZMA_RUN; + } + + ret = thr->block_encoder.code( + thr->block_encoder.coder, thr->allocator, + thr->in, &in_pos, in_limit, thr->outbuf->buf, + out_pos, out_size, action); + } while (ret == LZMA_OK && *out_pos < out_size); + + switch (ret) { + case LZMA_STREAM_END: + assert(state == THR_FINISH); + + // Encode the Block Header. By doing it after + // the compression, we can store the Compressed Size + // and Uncompressed Size fields. + ret = lzma_block_header_encode(&thr->block_options, + thr->outbuf->buf); + if (ret != LZMA_OK) { + worker_error(thr, ret); + return THR_STOP; + } + + break; + + case LZMA_OK: + // The data was incompressible. Encode it using uncompressed + // LZMA2 chunks. + // + // First wait that we have gotten all the input. + mythread_sync(thr->mutex) { + while (thr->state == THR_RUN) + mythread_cond_wait(&thr->cond, &thr->mutex); + + state = thr->state; + in_size = thr->in_size; + } + + if (state >= THR_STOP) + return state; + + // Do the encoding. This takes care of the Block Header too. + *out_pos = 0; + ret = lzma_block_uncomp_encode(&thr->block_options, + thr->in, in_size, thr->outbuf->buf, + out_pos, out_size); + + // It shouldn't fail. + if (ret != LZMA_OK) { + worker_error(thr, LZMA_PROG_ERROR); + return THR_STOP; + } + + break; + + default: + worker_error(thr, ret); + return THR_STOP; + } + + // Set the size information that will be read by the main thread + // to write the Index field. + thr->outbuf->unpadded_size + = lzma_block_unpadded_size(&thr->block_options); + assert(thr->outbuf->unpadded_size != 0); + thr->outbuf->uncompressed_size = thr->block_options.uncompressed_size; + + return THR_FINISH; +} + + +static MYTHREAD_RET_TYPE +worker_start(void *thr_ptr) +{ + worker_thread *thr = thr_ptr; + worker_state state = THR_IDLE; // Init to silence a warning + + while (true) { + // Wait for work. + mythread_sync(thr->mutex) { + while (true) { + // The thread is already idle so if we are + // requested to stop, just set the state. + if (thr->state == THR_STOP) { + thr->state = THR_IDLE; + mythread_cond_signal(&thr->cond); + } + + state = thr->state; + if (state != THR_IDLE) + break; + + mythread_cond_wait(&thr->cond, &thr->mutex); + } + } + + size_t out_pos = 0; + + assert(state != THR_IDLE); + assert(state != THR_STOP); + + if (state <= THR_FINISH) + state = worker_encode(thr, &out_pos, state); + + if (state == THR_EXIT) + break; + + // Mark the thread as idle unless the main thread has + // told us to exit. Signal is needed for the case + // where the main thread is waiting for the threads to stop. + mythread_sync(thr->mutex) { + if (thr->state != THR_EXIT) { + thr->state = THR_IDLE; + mythread_cond_signal(&thr->cond); + } + } + + mythread_sync(thr->coder->mutex) { + // If no errors occurred, make the encoded data + // available to be copied out. + if (state == THR_FINISH) { + thr->outbuf->pos = out_pos; + thr->outbuf->finished = true; + } + + // Update the main progress info. + thr->coder->progress_in + += thr->outbuf->uncompressed_size; + thr->coder->progress_out += out_pos; + thr->progress_in = 0; + thr->progress_out = 0; + + // Return this thread to the stack of free threads. + thr->next = thr->coder->threads_free; + thr->coder->threads_free = thr; + + mythread_cond_signal(&thr->coder->cond); + } + } + + // Exiting, free the resources. + lzma_filters_free(thr->filters, thr->allocator); + + mythread_mutex_destroy(&thr->mutex); + mythread_cond_destroy(&thr->cond); + + lzma_next_end(&thr->block_encoder, thr->allocator); + lzma_free(thr->in, thr->allocator); + return MYTHREAD_RET_VALUE; +} + + +/// Make the threads stop but not exit. Optionally wait for them to stop. +static void +threads_stop(lzma_stream_coder *coder, bool wait_for_threads) +{ + // Tell the threads to stop. + for (uint32_t i = 0; i < coder->threads_initialized; ++i) { + mythread_sync(coder->threads[i].mutex) { + coder->threads[i].state = THR_STOP; + mythread_cond_signal(&coder->threads[i].cond); + } + } + + if (!wait_for_threads) + return; + + // Wait for the threads to settle in the idle state. + for (uint32_t i = 0; i < coder->threads_initialized; ++i) { + mythread_sync(coder->threads[i].mutex) { + while (coder->threads[i].state != THR_IDLE) + mythread_cond_wait(&coder->threads[i].cond, + &coder->threads[i].mutex); + } + } + + return; +} + + +/// Stop the threads and free the resources associated with them. +/// Wait until the threads have exited. +static void +threads_end(lzma_stream_coder *coder, const lzma_allocator *allocator) +{ + for (uint32_t i = 0; i < coder->threads_initialized; ++i) { + mythread_sync(coder->threads[i].mutex) { + coder->threads[i].state = THR_EXIT; + mythread_cond_signal(&coder->threads[i].cond); + } + } + + for (uint32_t i = 0; i < coder->threads_initialized; ++i) { + int ret = mythread_join(coder->threads[i].thread_id); + assert(ret == 0); + (void)ret; + } + + lzma_free(coder->threads, allocator); + return; +} + + +/// Initialize a new worker_thread structure and create a new thread. +static lzma_ret +initialize_new_thread(lzma_stream_coder *coder, + const lzma_allocator *allocator) +{ + worker_thread *thr = &coder->threads[coder->threads_initialized]; + + thr->in = lzma_alloc(coder->block_size, allocator); + if (thr->in == NULL) + return LZMA_MEM_ERROR; + + if (mythread_mutex_init(&thr->mutex)) + goto error_mutex; + + if (mythread_cond_init(&thr->cond)) + goto error_cond; + + thr->state = THR_IDLE; + thr->allocator = allocator; + thr->coder = coder; + thr->progress_in = 0; + thr->progress_out = 0; + thr->block_encoder = LZMA_NEXT_CODER_INIT; + thr->filters[0].id = LZMA_VLI_UNKNOWN; + + if (mythread_create(&thr->thread_id, &worker_start, thr)) + goto error_thread; + + ++coder->threads_initialized; + coder->thr = thr; + + return LZMA_OK; + +error_thread: + mythread_cond_destroy(&thr->cond); + +error_cond: + mythread_mutex_destroy(&thr->mutex); + +error_mutex: + lzma_free(thr->in, allocator); + return LZMA_MEM_ERROR; +} + + +static lzma_ret +get_thread(lzma_stream_coder *coder, const lzma_allocator *allocator) +{ + // If there are no free output subqueues, there is no + // point to try getting a thread. + if (!lzma_outq_has_buf(&coder->outq)) + return LZMA_OK; + + // That's also true if we cannot allocate memory for the output + // buffer in the output queue. + return_if_error(lzma_outq_prealloc_buf(&coder->outq, allocator, + coder->outbuf_alloc_size)); + + // Make a thread-specific copy of the filter chain. Put it in + // the cache array first so that if we cannot get a new thread yet, + // the allocation is ready when we try again. + if (coder->filters_cache[0].id == LZMA_VLI_UNKNOWN) + return_if_error(lzma_filters_copy( + coder->filters, coder->filters_cache, allocator)); + + // If there is a free structure on the stack, use it. + mythread_sync(coder->mutex) { + if (coder->threads_free != NULL) { + coder->thr = coder->threads_free; + coder->threads_free = coder->threads_free->next; + } + } + + if (coder->thr == NULL) { + // If there are no uninitialized structures left, return. + if (coder->threads_initialized == coder->threads_max) + return LZMA_OK; + + // Initialize a new thread. + return_if_error(initialize_new_thread(coder, allocator)); + } + + // Reset the parts of the thread state that have to be done + // in the main thread. + mythread_sync(coder->thr->mutex) { + coder->thr->state = THR_RUN; + coder->thr->in_size = 0; + coder->thr->outbuf = lzma_outq_get_buf(&coder->outq, NULL); + + // Free the old thread-specific filter options and replace + // them with the already-allocated new options from + // coder->filters_cache[]. Then mark the cache as empty. + lzma_filters_free(coder->thr->filters, allocator); + memcpy(coder->thr->filters, coder->filters_cache, + sizeof(coder->filters_cache)); + coder->filters_cache[0].id = LZMA_VLI_UNKNOWN; + + mythread_cond_signal(&coder->thr->cond); + } + + return LZMA_OK; +} + + +static lzma_ret +stream_encode_in(lzma_stream_coder *coder, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, lzma_action action) +{ + while (*in_pos < in_size + || (coder->thr != NULL && action != LZMA_RUN)) { + if (coder->thr == NULL) { + // Get a new thread. + const lzma_ret ret = get_thread(coder, allocator); + if (coder->thr == NULL) + return ret; + } + + // Copy the input data to thread's buffer. + size_t thr_in_size = coder->thr->in_size; + lzma_bufcpy(in, in_pos, in_size, coder->thr->in, + &thr_in_size, coder->block_size); + + // Tell the Block encoder to finish if + // - it has got block_size bytes of input; or + // - all input was used and LZMA_FINISH, LZMA_FULL_FLUSH, + // or LZMA_FULL_BARRIER was used. + // + // TODO: LZMA_SYNC_FLUSH and LZMA_SYNC_BARRIER. + const bool finish = thr_in_size == coder->block_size + || (*in_pos == in_size && action != LZMA_RUN); + + bool block_error = false; + + mythread_sync(coder->thr->mutex) { + if (coder->thr->state == THR_IDLE) { + // Something has gone wrong with the Block + // encoder. It has set coder->thread_error + // which we will read a few lines later. + block_error = true; + } else { + // Tell the Block encoder its new amount + // of input and update the state if needed. + coder->thr->in_size = thr_in_size; + + if (finish) + coder->thr->state = THR_FINISH; + + mythread_cond_signal(&coder->thr->cond); + } + } + + if (block_error) { + lzma_ret ret; + + mythread_sync(coder->mutex) { + ret = coder->thread_error; + } + + return ret; + } + + if (finish) + coder->thr = NULL; + } + + return LZMA_OK; +} + + +/// Wait until more input can be consumed, more output can be read, or +/// an optional timeout is reached. +static bool +wait_for_work(lzma_stream_coder *coder, mythread_condtime *wait_abs, + bool *has_blocked, bool has_input) +{ + if (coder->timeout != 0 && !*has_blocked) { + // Every time when stream_encode_mt() is called via + // lzma_code(), *has_blocked starts as false. We set it + // to true here and calculate the absolute time when + // we must return if there's nothing to do. + // + // This way if we block multiple times for short moments + // less than "timeout" milliseconds, we will return once + // "timeout" amount of time has passed since the *first* + // blocking occurred. If the absolute time was calculated + // again every time we block, "timeout" would effectively + // be meaningless if we never consecutively block longer + // than "timeout" ms. + *has_blocked = true; + mythread_condtime_set(wait_abs, &coder->cond, coder->timeout); + } + + bool timed_out = false; + + mythread_sync(coder->mutex) { + // There are four things that we wait. If one of them + // becomes possible, we return. + // - If there is input left, we need to get a free + // worker thread and an output buffer for it. + // - Data ready to be read from the output queue. + // - A worker thread indicates an error. + // - Time out occurs. + while ((!has_input || coder->threads_free == NULL + || !lzma_outq_has_buf(&coder->outq)) + && !lzma_outq_is_readable(&coder->outq) + && coder->thread_error == LZMA_OK + && !timed_out) { + if (coder->timeout != 0) + timed_out = mythread_cond_timedwait( + &coder->cond, &coder->mutex, + wait_abs) != 0; + else + mythread_cond_wait(&coder->cond, + &coder->mutex); + } + } + + return timed_out; +} + + +static lzma_ret +stream_encode_mt(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_stream_coder *coder = coder_ptr; + + switch (coder->sequence) { + case SEQ_STREAM_HEADER: + lzma_bufcpy(coder->header, &coder->header_pos, + sizeof(coder->header), + out, out_pos, out_size); + if (coder->header_pos < sizeof(coder->header)) + return LZMA_OK; + + coder->header_pos = 0; + coder->sequence = SEQ_BLOCK; + + // Fall through + + case SEQ_BLOCK: { + // Initialized to silence warnings. + lzma_vli unpadded_size = 0; + lzma_vli uncompressed_size = 0; + lzma_ret ret = LZMA_OK; + + // These are for wait_for_work(). + bool has_blocked = false; + mythread_condtime wait_abs; + + while (true) { + mythread_sync(coder->mutex) { + // Check for Block encoder errors. + ret = coder->thread_error; + if (ret != LZMA_OK) { + assert(ret != LZMA_STREAM_END); + break; // Break out of mythread_sync. + } + + // Try to read compressed data to out[]. + ret = lzma_outq_read(&coder->outq, allocator, + out, out_pos, out_size, + &unpadded_size, + &uncompressed_size); + } + + if (ret == LZMA_STREAM_END) { + // End of Block. Add it to the Index. + ret = lzma_index_append(coder->index, + allocator, unpadded_size, + uncompressed_size); + if (ret != LZMA_OK) { + threads_stop(coder, false); + return ret; + } + + // If we didn't fill the output buffer yet, + // try to read more data. Maybe the next + // outbuf has been finished already too. + if (*out_pos < out_size) + continue; + } + + if (ret != LZMA_OK) { + // coder->thread_error was set. + threads_stop(coder, false); + return ret; + } + + // Try to give uncompressed data to a worker thread. + ret = stream_encode_in(coder, allocator, + in, in_pos, in_size, action); + if (ret != LZMA_OK) { + threads_stop(coder, false); + return ret; + } + + // See if we should wait or return. + // + // TODO: LZMA_SYNC_FLUSH and LZMA_SYNC_BARRIER. + if (*in_pos == in_size) { + // LZMA_RUN: More data is probably coming + // so return to let the caller fill the + // input buffer. + if (action == LZMA_RUN) + return LZMA_OK; + + // LZMA_FULL_BARRIER: The same as with + // LZMA_RUN but tell the caller that the + // barrier was completed. + if (action == LZMA_FULL_BARRIER) + return LZMA_STREAM_END; + + // Finishing or flushing isn't completed until + // all input data has been encoded and copied + // to the output buffer. + if (lzma_outq_is_empty(&coder->outq)) { + // LZMA_FINISH: Continue to encode + // the Index field. + if (action == LZMA_FINISH) + break; + + // LZMA_FULL_FLUSH: Return to tell + // the caller that flushing was + // completed. + if (action == LZMA_FULL_FLUSH) + return LZMA_STREAM_END; + } + } + + // Return if there is no output space left. + // This check must be done after testing the input + // buffer, because we might want to use a different + // return code. + if (*out_pos == out_size) + return LZMA_OK; + + // Neither in nor out has been used completely. + // Wait until there's something we can do. + if (wait_for_work(coder, &wait_abs, &has_blocked, + *in_pos < in_size)) + return LZMA_TIMED_OUT; + } + + // All Blocks have been encoded and the threads have stopped. + // Prepare to encode the Index field. + return_if_error(lzma_index_encoder_init( + &coder->index_encoder, allocator, + coder->index)); + coder->sequence = SEQ_INDEX; + + // Update the progress info to take the Index and + // Stream Footer into account. Those are very fast to encode + // so in terms of progress information they can be thought + // to be ready to be copied out. + coder->progress_out += lzma_index_size(coder->index) + + LZMA_STREAM_HEADER_SIZE; + } + + // Fall through + + case SEQ_INDEX: { + // Call the Index encoder. It doesn't take any input, so + // those pointers can be NULL. + const lzma_ret ret = coder->index_encoder.code( + coder->index_encoder.coder, allocator, + NULL, NULL, 0, + out, out_pos, out_size, LZMA_RUN); + if (ret != LZMA_STREAM_END) + return ret; + + // Encode the Stream Footer into coder->buffer. + coder->stream_flags.backward_size + = lzma_index_size(coder->index); + if (lzma_stream_footer_encode(&coder->stream_flags, + coder->header) != LZMA_OK) + return LZMA_PROG_ERROR; + + coder->sequence = SEQ_STREAM_FOOTER; + } + + // Fall through + + case SEQ_STREAM_FOOTER: + lzma_bufcpy(coder->header, &coder->header_pos, + sizeof(coder->header), + out, out_pos, out_size); + return coder->header_pos < sizeof(coder->header) + ? LZMA_OK : LZMA_STREAM_END; + } + + assert(0); + return LZMA_PROG_ERROR; +} + + +static void +stream_encoder_mt_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_stream_coder *coder = coder_ptr; + + // Threads must be killed before the output queue can be freed. + threads_end(coder, allocator); + lzma_outq_end(&coder->outq, allocator); + + lzma_filters_free(coder->filters, allocator); + lzma_filters_free(coder->filters_cache, allocator); + + lzma_next_end(&coder->index_encoder, allocator); + lzma_index_end(coder->index, allocator); + + mythread_cond_destroy(&coder->cond); + mythread_mutex_destroy(&coder->mutex); + + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +stream_encoder_mt_update(void *coder_ptr, const lzma_allocator *allocator, + const lzma_filter *filters, + const lzma_filter *reversed_filters + lzma_attribute((__unused__))) +{ + lzma_stream_coder *coder = coder_ptr; + + // Applications shouldn't attempt to change the options when + // we are already encoding the Index or Stream Footer. + if (coder->sequence > SEQ_BLOCK) + return LZMA_PROG_ERROR; + + // For now the threaded encoder doesn't support changing + // the options in the middle of a Block. + if (coder->thr != NULL) + return LZMA_PROG_ERROR; + + // Check if the filter chain seems mostly valid. See the comment + // in stream_encoder_mt_init(). + if (lzma_raw_encoder_memusage(filters) == UINT64_MAX) + return LZMA_OPTIONS_ERROR; + + // Make a copy to a temporary buffer first. This way the encoder + // state stays unchanged if an error occurs in lzma_filters_copy(). + lzma_filter temp[LZMA_FILTERS_MAX + 1]; + return_if_error(lzma_filters_copy(filters, temp, allocator)); + + // Free the options of the old chain as well as the cache. + lzma_filters_free(coder->filters, allocator); + lzma_filters_free(coder->filters_cache, allocator); + + // Copy the new filter chain in place. + memcpy(coder->filters, temp, sizeof(temp)); + + return LZMA_OK; +} + + +/// Options handling for lzma_stream_encoder_mt_init() and +/// lzma_stream_encoder_mt_memusage() +static lzma_ret +get_options(const lzma_mt *options, lzma_options_easy *opt_easy, + const lzma_filter **filters, uint64_t *block_size, + uint64_t *outbuf_size_max) +{ + // Validate some of the options. + if (options == NULL) + return LZMA_PROG_ERROR; + + if (options->flags != 0 || options->threads == 0 + || options->threads > LZMA_THREADS_MAX) + return LZMA_OPTIONS_ERROR; + + if (options->filters != NULL) { + // Filter chain was given, use it as is. + *filters = options->filters; + } else { + // Use a preset. + if (lzma_easy_preset(opt_easy, options->preset)) + return LZMA_OPTIONS_ERROR; + + *filters = opt_easy->filters; + } + + // Block size + if (options->block_size > 0) { + if (options->block_size > BLOCK_SIZE_MAX) + return LZMA_OPTIONS_ERROR; + + *block_size = options->block_size; + } else { + // Determine the Block size from the filter chain. + *block_size = lzma_mt_block_size(*filters); + if (*block_size == 0) + return LZMA_OPTIONS_ERROR; + + assert(*block_size <= BLOCK_SIZE_MAX); + } + + // Calculate the maximum amount output that a single output buffer + // may need to hold. This is the same as the maximum total size of + // a Block. + *outbuf_size_max = lzma_block_buffer_bound64(*block_size); + if (*outbuf_size_max == 0) + return LZMA_MEM_ERROR; + + return LZMA_OK; +} + + +static void +get_progress(void *coder_ptr, uint64_t *progress_in, uint64_t *progress_out) +{ + lzma_stream_coder *coder = coder_ptr; + + // Lock coder->mutex to prevent finishing threads from moving their + // progress info from the worker_thread structure to lzma_stream_coder. + mythread_sync(coder->mutex) { + *progress_in = coder->progress_in; + *progress_out = coder->progress_out; + + for (size_t i = 0; i < coder->threads_initialized; ++i) { + mythread_sync(coder->threads[i].mutex) { + *progress_in += coder->threads[i].progress_in; + *progress_out += coder->threads[i] + .progress_out; + } + } + } + + return; +} + + +static lzma_ret +stream_encoder_mt_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_mt *options) +{ + lzma_next_coder_init(&stream_encoder_mt_init, next, allocator); + + // Get the filter chain. + lzma_options_easy easy; + const lzma_filter *filters; + uint64_t block_size; + uint64_t outbuf_size_max; + return_if_error(get_options(options, &easy, &filters, + &block_size, &outbuf_size_max)); + +#if SIZE_MAX < UINT64_MAX + if (block_size > SIZE_MAX || outbuf_size_max > SIZE_MAX) + return LZMA_MEM_ERROR; +#endif + + // Validate the filter chain so that we can give an error in this + // function instead of delaying it to the first call to lzma_code(). + // The memory usage calculation verifies the filter chain as + // a side effect so we take advantage of that. It's not a perfect + // check though as raw encoder allows LZMA1 too but such problems + // will be caught eventually with Block Header encoder. + if (lzma_raw_encoder_memusage(filters) == UINT64_MAX) + return LZMA_OPTIONS_ERROR; + + // Validate the Check ID. + if ((unsigned int)(options->check) > LZMA_CHECK_ID_MAX) + return LZMA_PROG_ERROR; + + if (!lzma_check_is_supported(options->check)) + return LZMA_UNSUPPORTED_CHECK; + + // Allocate and initialize the base structure if needed. + lzma_stream_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_stream_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + + // For the mutex and condition variable initializations + // the error handling has to be done here because + // stream_encoder_mt_end() doesn't know if they have + // already been initialized or not. + if (mythread_mutex_init(&coder->mutex)) { + lzma_free(coder, allocator); + next->coder = NULL; + return LZMA_MEM_ERROR; + } + + if (mythread_cond_init(&coder->cond)) { + mythread_mutex_destroy(&coder->mutex); + lzma_free(coder, allocator); + next->coder = NULL; + return LZMA_MEM_ERROR; + } + + next->code = &stream_encode_mt; + next->end = &stream_encoder_mt_end; + next->get_progress = &get_progress; + next->update = &stream_encoder_mt_update; + + coder->filters[0].id = LZMA_VLI_UNKNOWN; + coder->filters_cache[0].id = LZMA_VLI_UNKNOWN; + coder->index_encoder = LZMA_NEXT_CODER_INIT; + coder->index = NULL; + memzero(&coder->outq, sizeof(coder->outq)); + coder->threads = NULL; + coder->threads_max = 0; + coder->threads_initialized = 0; + } + + // Basic initializations + coder->sequence = SEQ_STREAM_HEADER; + coder->block_size = (size_t)(block_size); + coder->outbuf_alloc_size = (size_t)(outbuf_size_max); + coder->thread_error = LZMA_OK; + coder->thr = NULL; + + // Allocate the thread-specific base structures. + assert(options->threads > 0); + if (coder->threads_max != options->threads) { + threads_end(coder, allocator); + + coder->threads = NULL; + coder->threads_max = 0; + + coder->threads_initialized = 0; + coder->threads_free = NULL; + + coder->threads = lzma_alloc( + options->threads * sizeof(worker_thread), + allocator); + if (coder->threads == NULL) + return LZMA_MEM_ERROR; + + coder->threads_max = options->threads; + } else { + // Reuse the old structures and threads. Tell the running + // threads to stop and wait until they have stopped. + threads_stop(coder, true); + } + + // Output queue + return_if_error(lzma_outq_init(&coder->outq, allocator, + options->threads)); + + // Timeout + coder->timeout = options->timeout; + + // Free the old filter chain and the cache. + lzma_filters_free(coder->filters, allocator); + lzma_filters_free(coder->filters_cache, allocator); + + // Copy the new filter chain. + return_if_error(lzma_filters_copy( + filters, coder->filters, allocator)); + + // Index + lzma_index_end(coder->index, allocator); + coder->index = lzma_index_init(allocator); + if (coder->index == NULL) + return LZMA_MEM_ERROR; + + // Stream Header + coder->stream_flags.version = 0; + coder->stream_flags.check = options->check; + return_if_error(lzma_stream_header_encode( + &coder->stream_flags, coder->header)); + + coder->header_pos = 0; + + // Progress info + coder->progress_in = 0; + coder->progress_out = LZMA_STREAM_HEADER_SIZE; + + return LZMA_OK; +} + + +#ifdef HAVE_SYMBOL_VERSIONS_LINUX +// These are for compatibility with binaries linked against liblzma that +// has been patched with xz-5.2.2-compat-libs.patch from RHEL/CentOS 7. +// Actually that patch didn't create lzma_stream_encoder_mt@XZ_5.2.2 +// but it has been added here anyway since someone might misread the +// RHEL patch and think both @XZ_5.1.2alpha and @XZ_5.2.2 exist. +LZMA_SYMVER_API("lzma_stream_encoder_mt@XZ_5.1.2alpha", + lzma_ret, lzma_stream_encoder_mt_512a)( + lzma_stream *strm, const lzma_mt *options) + lzma_nothrow lzma_attr_warn_unused_result + __attribute__((__alias__("lzma_stream_encoder_mt_52"))); + +LZMA_SYMVER_API("lzma_stream_encoder_mt@XZ_5.2.2", + lzma_ret, lzma_stream_encoder_mt_522)( + lzma_stream *strm, const lzma_mt *options) + lzma_nothrow lzma_attr_warn_unused_result + __attribute__((__alias__("lzma_stream_encoder_mt_52"))); + +LZMA_SYMVER_API("lzma_stream_encoder_mt@@XZ_5.2", + lzma_ret, lzma_stream_encoder_mt_52)( + lzma_stream *strm, const lzma_mt *options) + lzma_nothrow lzma_attr_warn_unused_result; + +#define lzma_stream_encoder_mt lzma_stream_encoder_mt_52 +#endif +extern LZMA_API(lzma_ret) +lzma_stream_encoder_mt(lzma_stream *strm, const lzma_mt *options) +{ + lzma_next_strm_init(stream_encoder_mt_init, strm, options); + + strm->internal->supported_actions[LZMA_RUN] = true; +// strm->internal->supported_actions[LZMA_SYNC_FLUSH] = true; + strm->internal->supported_actions[LZMA_FULL_FLUSH] = true; + strm->internal->supported_actions[LZMA_FULL_BARRIER] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; + + return LZMA_OK; +} + + +#ifdef HAVE_SYMBOL_VERSIONS_LINUX +LZMA_SYMVER_API("lzma_stream_encoder_mt_memusage@XZ_5.1.2alpha", + uint64_t, lzma_stream_encoder_mt_memusage_512a)( + const lzma_mt *options) lzma_nothrow lzma_attr_pure + __attribute__((__alias__("lzma_stream_encoder_mt_memusage_52"))); + +LZMA_SYMVER_API("lzma_stream_encoder_mt_memusage@XZ_5.2.2", + uint64_t, lzma_stream_encoder_mt_memusage_522)( + const lzma_mt *options) lzma_nothrow lzma_attr_pure + __attribute__((__alias__("lzma_stream_encoder_mt_memusage_52"))); + +LZMA_SYMVER_API("lzma_stream_encoder_mt_memusage@@XZ_5.2", + uint64_t, lzma_stream_encoder_mt_memusage_52)( + const lzma_mt *options) lzma_nothrow lzma_attr_pure; + +#define lzma_stream_encoder_mt_memusage lzma_stream_encoder_mt_memusage_52 +#endif +// This function name is a monster but it's consistent with the older +// monster names. :-( 31 chars is the max that C99 requires so in that +// sense it's not too long. ;-) +extern LZMA_API(uint64_t) +lzma_stream_encoder_mt_memusage(const lzma_mt *options) +{ + lzma_options_easy easy; + const lzma_filter *filters; + uint64_t block_size; + uint64_t outbuf_size_max; + + if (get_options(options, &easy, &filters, &block_size, + &outbuf_size_max) != LZMA_OK) + return UINT64_MAX; + + // Memory usage of the input buffers + const uint64_t inbuf_memusage = options->threads * block_size; + + // Memory usage of the filter encoders + uint64_t filters_memusage = lzma_raw_encoder_memusage(filters); + if (filters_memusage == UINT64_MAX) + return UINT64_MAX; + + filters_memusage *= options->threads; + + // Memory usage of the output queue + const uint64_t outq_memusage = lzma_outq_memusage( + outbuf_size_max, options->threads); + if (outq_memusage == UINT64_MAX) + return UINT64_MAX; + + // Sum them with overflow checking. + uint64_t total_memusage = LZMA_MEMUSAGE_BASE + + sizeof(lzma_stream_coder) + + options->threads * sizeof(worker_thread); + + if (UINT64_MAX - total_memusage < inbuf_memusage) + return UINT64_MAX; + + total_memusage += inbuf_memusage; + + if (UINT64_MAX - total_memusage < filters_memusage) + return UINT64_MAX; + + total_memusage += filters_memusage; + + if (UINT64_MAX - total_memusage < outq_memusage) + return UINT64_MAX; + + return total_memusage + outq_memusage; +} diff --git a/src/liblzma/common/stream_flags_common.c b/src/liblzma/common/stream_flags_common.c new file mode 100644 index 0000000..fbe8eb8 --- /dev/null +++ b/src/liblzma/common/stream_flags_common.c @@ -0,0 +1,47 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_flags_common.c +/// \brief Common stuff for Stream flags coders +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "stream_flags_common.h" + + +const uint8_t lzma_header_magic[6] = { 0xFD, 0x37, 0x7A, 0x58, 0x5A, 0x00 }; +const uint8_t lzma_footer_magic[2] = { 0x59, 0x5A }; + + +extern LZMA_API(lzma_ret) +lzma_stream_flags_compare( + const lzma_stream_flags *a, const lzma_stream_flags *b) +{ + // We can compare only version 0 structures. + if (a->version != 0 || b->version != 0) + return LZMA_OPTIONS_ERROR; + + // Check type + if ((unsigned int)(a->check) > LZMA_CHECK_ID_MAX + || (unsigned int)(b->check) > LZMA_CHECK_ID_MAX) + return LZMA_PROG_ERROR; + + if (a->check != b->check) + return LZMA_DATA_ERROR; + + // Backward Sizes are compared only if they are known in both. + if (a->backward_size != LZMA_VLI_UNKNOWN + && b->backward_size != LZMA_VLI_UNKNOWN) { + if (!is_backward_size_valid(a) || !is_backward_size_valid(b)) + return LZMA_PROG_ERROR; + + if (a->backward_size != b->backward_size) + return LZMA_DATA_ERROR; + } + + return LZMA_OK; +} diff --git a/src/liblzma/common/stream_flags_common.h b/src/liblzma/common/stream_flags_common.h new file mode 100644 index 0000000..9f3122a --- /dev/null +++ b/src/liblzma/common/stream_flags_common.h @@ -0,0 +1,33 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_flags_common.h +/// \brief Common stuff for Stream flags coders +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_STREAM_FLAGS_COMMON_H +#define LZMA_STREAM_FLAGS_COMMON_H + +#include "common.h" + +/// Size of the Stream Flags field +#define LZMA_STREAM_FLAGS_SIZE 2 + +extern const uint8_t lzma_header_magic[6]; +extern const uint8_t lzma_footer_magic[2]; + + +static inline bool +is_backward_size_valid(const lzma_stream_flags *options) +{ + return options->backward_size >= LZMA_BACKWARD_SIZE_MIN + && options->backward_size <= LZMA_BACKWARD_SIZE_MAX + && (options->backward_size & 3) == 0; +} + +#endif diff --git a/src/liblzma/common/stream_flags_decoder.c b/src/liblzma/common/stream_flags_decoder.c new file mode 100644 index 0000000..b8d263b --- /dev/null +++ b/src/liblzma/common/stream_flags_decoder.c @@ -0,0 +1,88 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_flags_decoder.c +/// \brief Decodes Stream Header and Stream Footer from .xz files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "stream_flags_common.h" + + +static bool +stream_flags_decode(lzma_stream_flags *options, const uint8_t *in) +{ + // Reserved bits must be unset. + if (in[0] != 0x00 || (in[1] & 0xF0)) + return true; + + options->version = 0; + options->check = in[1] & 0x0F; + + return false; +} + + +extern LZMA_API(lzma_ret) +lzma_stream_header_decode(lzma_stream_flags *options, const uint8_t *in) +{ + // Magic + if (memcmp(in, lzma_header_magic, sizeof(lzma_header_magic)) != 0) + return LZMA_FORMAT_ERROR; + + // Verify the CRC32 so we can distinguish between corrupt + // and unsupported files. + const uint32_t crc = lzma_crc32(in + sizeof(lzma_header_magic), + LZMA_STREAM_FLAGS_SIZE, 0); + if (crc != read32le(in + sizeof(lzma_header_magic) + + LZMA_STREAM_FLAGS_SIZE)) { +#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION + return LZMA_DATA_ERROR; +#endif + } + + // Stream Flags + if (stream_flags_decode(options, in + sizeof(lzma_header_magic))) + return LZMA_OPTIONS_ERROR; + + // Set Backward Size to indicate unknown value. That way + // lzma_stream_flags_compare() can be used to compare Stream Header + // and Stream Footer while keeping it useful also for comparing + // two Stream Footers. + options->backward_size = LZMA_VLI_UNKNOWN; + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_stream_footer_decode(lzma_stream_flags *options, const uint8_t *in) +{ + // Magic + if (memcmp(in + sizeof(uint32_t) * 2 + LZMA_STREAM_FLAGS_SIZE, + lzma_footer_magic, sizeof(lzma_footer_magic)) != 0) + return LZMA_FORMAT_ERROR; + + // CRC32 + const uint32_t crc = lzma_crc32(in + sizeof(uint32_t), + sizeof(uint32_t) + LZMA_STREAM_FLAGS_SIZE, 0); + if (crc != read32le(in)) { +#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION + return LZMA_DATA_ERROR; +#endif + } + + // Stream Flags + if (stream_flags_decode(options, in + sizeof(uint32_t) * 2)) + return LZMA_OPTIONS_ERROR; + + // Backward Size + options->backward_size = read32le(in + sizeof(uint32_t)); + options->backward_size = (options->backward_size + 1) * 4; + + return LZMA_OK; +} diff --git a/src/liblzma/common/stream_flags_encoder.c b/src/liblzma/common/stream_flags_encoder.c new file mode 100644 index 0000000..b98ab17 --- /dev/null +++ b/src/liblzma/common/stream_flags_encoder.c @@ -0,0 +1,86 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file stream_flags_encoder.c +/// \brief Encodes Stream Header and Stream Footer for .xz files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "stream_flags_common.h" + + +static bool +stream_flags_encode(const lzma_stream_flags *options, uint8_t *out) +{ + if ((unsigned int)(options->check) > LZMA_CHECK_ID_MAX) + return true; + + out[0] = 0x00; + out[1] = options->check; + + return false; +} + + +extern LZMA_API(lzma_ret) +lzma_stream_header_encode(const lzma_stream_flags *options, uint8_t *out) +{ + assert(sizeof(lzma_header_magic) + LZMA_STREAM_FLAGS_SIZE + + 4 == LZMA_STREAM_HEADER_SIZE); + + if (options->version != 0) + return LZMA_OPTIONS_ERROR; + + // Magic + memcpy(out, lzma_header_magic, sizeof(lzma_header_magic)); + + // Stream Flags + if (stream_flags_encode(options, out + sizeof(lzma_header_magic))) + return LZMA_PROG_ERROR; + + // CRC32 of the Stream Header + const uint32_t crc = lzma_crc32(out + sizeof(lzma_header_magic), + LZMA_STREAM_FLAGS_SIZE, 0); + + write32le(out + sizeof(lzma_header_magic) + LZMA_STREAM_FLAGS_SIZE, + crc); + + return LZMA_OK; +} + + +extern LZMA_API(lzma_ret) +lzma_stream_footer_encode(const lzma_stream_flags *options, uint8_t *out) +{ + assert(2 * 4 + LZMA_STREAM_FLAGS_SIZE + sizeof(lzma_footer_magic) + == LZMA_STREAM_HEADER_SIZE); + + if (options->version != 0) + return LZMA_OPTIONS_ERROR; + + // Backward Size + if (!is_backward_size_valid(options)) + return LZMA_PROG_ERROR; + + write32le(out + 4, options->backward_size / 4 - 1); + + // Stream Flags + if (stream_flags_encode(options, out + 2 * 4)) + return LZMA_PROG_ERROR; + + // CRC32 + const uint32_t crc = lzma_crc32( + out + 4, 4 + LZMA_STREAM_FLAGS_SIZE, 0); + + write32le(out, crc); + + // Magic + memcpy(out + 2 * 4 + LZMA_STREAM_FLAGS_SIZE, + lzma_footer_magic, sizeof(lzma_footer_magic)); + + return LZMA_OK; +} diff --git a/src/liblzma/common/string_conversion.c b/src/liblzma/common/string_conversion.c new file mode 100644 index 0000000..53fdff2 --- /dev/null +++ b/src/liblzma/common/string_conversion.c @@ -0,0 +1,1317 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file string_conversion.c +/// \brief Conversion of strings to filter chain and vice versa +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "filter_common.h" + + +///////////////////// +// String building // +///////////////////// + +/// How much memory to allocate for strings. For now, no realloc is used +/// so this needs to be big enough even though there of course is +/// an overflow check still. +/// +/// FIXME? Using a fixed size is wasteful if the application doesn't free +/// the string fairly quickly but this can be improved later if needed. +#define STR_ALLOC_SIZE 800 + + +typedef struct { + char *buf; + size_t pos; +} lzma_str; + + +static lzma_ret +str_init(lzma_str *str, const lzma_allocator *allocator) +{ + str->buf = lzma_alloc(STR_ALLOC_SIZE, allocator); + if (str->buf == NULL) + return LZMA_MEM_ERROR; + + str->pos = 0; + return LZMA_OK; +} + + +static void +str_free(lzma_str *str, const lzma_allocator *allocator) +{ + lzma_free(str->buf, allocator); + return; +} + + +static bool +str_is_full(const lzma_str *str) +{ + return str->pos == STR_ALLOC_SIZE - 1; +} + + +static lzma_ret +str_finish(char **dest, lzma_str *str, const lzma_allocator *allocator) +{ + if (str_is_full(str)) { + // The preallocated buffer was too small. + // This shouldn't happen as STR_ALLOC_SIZE should + // be adjusted if new filters are added. + lzma_free(str->buf, allocator); + *dest = NULL; + assert(0); + return LZMA_PROG_ERROR; + } + + str->buf[str->pos] = '\0'; + *dest = str->buf; + return LZMA_OK; +} + + +static void +str_append_str(lzma_str *str, const char *s) +{ + const size_t len = strlen(s); + const size_t limit = STR_ALLOC_SIZE - 1 - str->pos; + const size_t copy_size = my_min(len, limit); + + memcpy(str->buf + str->pos, s, copy_size); + str->pos += copy_size; + return; +} + + +static void +str_append_u32(lzma_str *str, uint32_t v, bool use_byte_suffix) +{ + if (v == 0) { + str_append_str(str, "0"); + } else { + // NOTE: Don't use plain "B" because xz and the parser in this + // file don't support it and at glance it may look like 8 + // (there cannot be a space before the suffix). + static const char suffixes[4][4] = { "", "KiB", "MiB", "GiB" }; + + size_t suf = 0; + if (use_byte_suffix) { + while ((v & 1023) == 0 + && suf < ARRAY_SIZE(suffixes) - 1) { + v >>= 10; + ++suf; + } + } + + // UINT32_MAX in base 10 would need 10 + 1 bytes. Remember + // that initializing to "" initializes all elements to + // zero so '\0'-termination gets handled by this. + char buf[16] = ""; + size_t pos = sizeof(buf) - 1; + + do { + buf[--pos] = '0' + (v % 10); + v /= 10; + } while (v != 0); + + str_append_str(str, buf + pos); + str_append_str(str, suffixes[suf]); + } + + return; +} + + +////////////////////////////////////////////// +// Parsing and stringification declarations // +////////////////////////////////////////////// + +/// Maximum length for filter and option names. +/// 11 chars + terminating '\0' + sizeof(uint32_t) = 16 bytes +#define NAME_LEN_MAX 11 + + +/// For option_map.flags: Use .u.map to do convert the input value +/// to an integer. Without this flag, .u.range.{min,max} are used +/// as the allowed range for the integer. +#define OPTMAP_USE_NAME_VALUE_MAP 0x01 + +/// For option_map.flags: Allow KiB/MiB/GiB in input string and use them in +/// the stringified output if the value is an exact multiple of these. +/// This is used e.g. for LZMA1/2 dictionary size. +#define OPTMAP_USE_BYTE_SUFFIX 0x02 + +/// For option_map.flags: If the integer value is zero then this option +/// won't be included in the stringified output. It's used e.g. for +/// BCJ filter start offset which usually is zero. +#define OPTMAP_NO_STRFY_ZERO 0x04 + +/// Possible values for option_map.type. Since OPTMAP_TYPE_UINT32 is 0, +/// it doesn't need to be specified in the initializers as it is +/// the implicit value. +enum { + OPTMAP_TYPE_UINT32, + OPTMAP_TYPE_LZMA_MODE, + OPTMAP_TYPE_LZMA_MATCH_FINDER, + OPTMAP_TYPE_LZMA_PRESET, +}; + + +/// This is for mapping string values in options to integers. +/// The last element of an array must have "" as the name. +/// It's used e.g. for match finder names in LZMA1/2. +typedef struct { + const char name[NAME_LEN_MAX + 1]; + const uint32_t value; +} name_value_map; + + +/// Each filter that has options needs an array of option_map structures. +/// The array doesn't need to be terminated as the functions take the +/// length of the array as an argument. +/// +/// When converting a string to filter options structure, option values +/// will be handled in a few different ways: +/// +/// (1) If .type equals OPTMAP_TYPE_LZMA_PRESET then LZMA1/2 preset string +/// is handled specially. +/// +/// (2) If .flags has OPTMAP_USE_NAME_VALUE_MAP set then the string is +/// converted to an integer using the name_value_map pointed by .u.map. +/// The last element in .u.map must have .name = "" as the terminator. +/// +/// (3) Otherwise the string is treated as a non-negative unsigned decimal +/// integer which must be in the range set in .u.range. If .flags has +/// OPTMAP_USE_BYTE_SUFFIX then KiB, MiB, and GiB suffixes are allowed. +/// +/// The integer value from (2) or (3) is then stored to filter_options +/// at the offset specified in .offset using the type specified in .type +/// (default is uint32_t). +/// +/// Stringifying a filter is done by processing a given number of options +/// in oder from the beginning of an option_map array. The integer is +/// read from filter_options at .offset using the type from .type. +/// +/// If the integer is zero and .flags has OPTMAP_NO_STRFY_ZERO then the +/// option is skipped. +/// +/// If .flags has OPTMAP_USE_NAME_VALUE_MAP set then .u.map will be used +/// to convert the option to a string. If the map doesn't contain a string +/// for the integer value then "UNKNOWN" is used. +/// +/// If .flags doesn't have OPTMAP_USE_NAME_VALUE_MAP set then the integer is +/// converted to a decimal value. If OPTMAP_USE_BYTE_SUFFIX is used then KiB, +/// MiB, or GiB suffix is used if the value is an exact multiple of these. +/// Plain "B" suffix is never used. +typedef struct { + char name[NAME_LEN_MAX + 1]; + uint8_t type; + uint8_t flags; + uint16_t offset; + + union { + struct { + uint32_t min; + uint32_t max; + } range; + + const name_value_map *map; + } u; +} option_map; + + +static const char *parse_options(const char **const str, const char *str_end, + void *filter_options, + const option_map *const optmap, const size_t optmap_size); + + +///////// +// BCJ // +///////// + +#if defined(HAVE_ENCODER_X86) \ + || defined(HAVE_DECODER_X86) \ + || defined(HAVE_ENCODER_ARM) \ + || defined(HAVE_DECODER_ARM) \ + || defined(HAVE_ENCODER_ARMTHUMB) \ + || defined(HAVE_DECODER_ARMTHUMB) \ + || defined(HAVE_ENCODER_ARM64) \ + || defined(HAVE_DECODER_ARM64) \ + || defined(HAVE_ENCODER_POWERPC) \ + || defined(HAVE_DECODER_POWERPC) \ + || defined(HAVE_ENCODER_IA64) \ + || defined(HAVE_DECODER_IA64) \ + || defined(HAVE_ENCODER_SPARC) \ + || defined(HAVE_DECODER_SPARC) +static const option_map bcj_optmap[] = { + { + .name = "start", + .flags = OPTMAP_NO_STRFY_ZERO | OPTMAP_USE_BYTE_SUFFIX, + .offset = offsetof(lzma_options_bcj, start_offset), + .u.range.min = 0, + .u.range.max = UINT32_MAX, + } +}; + + +static const char * +parse_bcj(const char **const str, const char *str_end, void *filter_options) +{ + // filter_options was zeroed on allocation and that is enough + // for the default value. + return parse_options(str, str_end, filter_options, + bcj_optmap, ARRAY_SIZE(bcj_optmap)); +} +#endif + + +/////////// +// Delta // +/////////// + +#if defined(HAVE_ENCODER_DELTA) || defined(HAVE_DECODER_DELTA) +static const option_map delta_optmap[] = { + { + .name = "dist", + .offset = offsetof(lzma_options_delta, dist), + .u.range.min = LZMA_DELTA_DIST_MIN, + .u.range.max = LZMA_DELTA_DIST_MAX, + } +}; + + +static const char * +parse_delta(const char **const str, const char *str_end, void *filter_options) +{ + lzma_options_delta *opts = filter_options; + opts->type = LZMA_DELTA_TYPE_BYTE; + opts->dist = LZMA_DELTA_DIST_MIN; + + return parse_options(str, str_end, filter_options, + delta_optmap, ARRAY_SIZE(delta_optmap)); +} +#endif + + +/////////////////// +// LZMA1 & LZMA2 // +/////////////////// + +/// Help string for presets +#define LZMA12_PRESET_STR "0-9[e]" + + +static const char * +parse_lzma12_preset(const char **const str, const char *str_end, + uint32_t *preset) +{ + assert(*str < str_end); + *preset = (uint32_t)(**str - '0'); + + // NOTE: Remember to update LZMA_PRESET_STR if this is modified! + while (++*str < str_end) { + switch (**str) { + case 'e': + *preset |= LZMA_PRESET_EXTREME; + break; + + default: + return "Unsupported preset flag"; + } + } + + return NULL; +} + + +static const char * +set_lzma12_preset(const char **const str, const char *str_end, + void *filter_options) +{ + uint32_t preset; + const char *errmsg = parse_lzma12_preset(str, str_end, &preset); + if (errmsg != NULL) + return errmsg; + + lzma_options_lzma *opts = filter_options; + if (lzma_lzma_preset(opts, preset)) + return "Unsupported preset"; + + return NULL; +} + + +static const name_value_map lzma12_mode_map[] = { + { "fast", LZMA_MODE_FAST }, + { "normal", LZMA_MODE_NORMAL }, + { "", 0 } +}; + + +static const name_value_map lzma12_mf_map[] = { + { "hc3", LZMA_MF_HC3 }, + { "hc4", LZMA_MF_HC4 }, + { "bt2", LZMA_MF_BT2 }, + { "bt3", LZMA_MF_BT3 }, + { "bt4", LZMA_MF_BT4 }, + { "", 0 } +}; + + +static const option_map lzma12_optmap[] = { + { + .name = "preset", + .type = OPTMAP_TYPE_LZMA_PRESET, + }, { + .name = "dict", + .flags = OPTMAP_USE_BYTE_SUFFIX, + .offset = offsetof(lzma_options_lzma, dict_size), + .u.range.min = LZMA_DICT_SIZE_MIN, + // FIXME? The max is really max for encoding but decoding + // would allow 4 GiB - 1 B. + .u.range.max = (UINT32_C(1) << 30) + (UINT32_C(1) << 29), + }, { + .name = "lc", + .offset = offsetof(lzma_options_lzma, lc), + .u.range.min = LZMA_LCLP_MIN, + .u.range.max = LZMA_LCLP_MAX, + }, { + .name = "lp", + .offset = offsetof(lzma_options_lzma, lp), + .u.range.min = LZMA_LCLP_MIN, + .u.range.max = LZMA_LCLP_MAX, + }, { + .name = "pb", + .offset = offsetof(lzma_options_lzma, pb), + .u.range.min = LZMA_PB_MIN, + .u.range.max = LZMA_PB_MAX, + }, { + .name = "mode", + .type = OPTMAP_TYPE_LZMA_MODE, + .flags = OPTMAP_USE_NAME_VALUE_MAP, + .offset = offsetof(lzma_options_lzma, mode), + .u.map = lzma12_mode_map, + }, { + .name = "nice", + .offset = offsetof(lzma_options_lzma, nice_len), + .u.range.min = 2, + .u.range.max = 273, + }, { + .name = "mf", + .type = OPTMAP_TYPE_LZMA_MATCH_FINDER, + .flags = OPTMAP_USE_NAME_VALUE_MAP, + .offset = offsetof(lzma_options_lzma, mf), + .u.map = lzma12_mf_map, + }, { + .name = "depth", + .offset = offsetof(lzma_options_lzma, depth), + .u.range.min = 0, + .u.range.max = UINT32_MAX, + } +}; + + +static const char * +parse_lzma12(const char **const str, const char *str_end, void *filter_options) +{ + lzma_options_lzma *opts = filter_options; + + // It cannot fail. + const bool preset_ret = lzma_lzma_preset(opts, LZMA_PRESET_DEFAULT); + assert(!preset_ret); + (void)preset_ret; + + const char *errmsg = parse_options(str, str_end, filter_options, + lzma12_optmap, ARRAY_SIZE(lzma12_optmap)); + if (errmsg != NULL) + return errmsg; + + if (opts->lc + opts->lp > LZMA_LCLP_MAX) + return "The sum of lc and lp must not exceed 4"; + + return NULL; +} + + +///////////////////////////////////////// +// Generic parsing and stringification // +///////////////////////////////////////// + +static const struct { + /// Name of the filter + char name[NAME_LEN_MAX + 1]; + + /// For lzma_str_to_filters: + /// Size of the filter-specific options structure. + uint32_t opts_size; + + /// Filter ID + lzma_vli id; + + /// For lzma_str_to_filters: + /// Function to parse the filter-specific options. The filter_options + /// will already have been allocated using lzma_alloc_zero(). + const char *(*parse)(const char **str, const char *str_end, + void *filter_options); + + /// For lzma_str_from_filters: + /// If the flag LZMA_STR_ENCODER is used then the first + /// strfy_encoder elements of optmap are stringified. + /// With LZMA_STR_DECODER strfy_decoder is used. + /// Currently encoders use all flags that decoders do but if + /// that changes then this needs to be changed too, for example, + /// add a new OPTMAP flag to skip printing some decoder-only flags. + const option_map *optmap; + uint8_t strfy_encoder; + uint8_t strfy_decoder; + + /// For lzma_str_from_filters: + /// If true, lzma_filter.options is allowed to be NULL. In that case, + /// only the filter name is printed without any options. + bool allow_null; + +} filter_name_map[] = { +#if defined (HAVE_ENCODER_LZMA1) || defined(HAVE_DECODER_LZMA1) + { "lzma1", sizeof(lzma_options_lzma), LZMA_FILTER_LZMA1, + &parse_lzma12, lzma12_optmap, 9, 5, false }, +#endif + +#if defined(HAVE_ENCODER_LZMA2) || defined(HAVE_DECODER_LZMA2) + { "lzma2", sizeof(lzma_options_lzma), LZMA_FILTER_LZMA2, + &parse_lzma12, lzma12_optmap, 9, 2, false }, +#endif + +#if defined(HAVE_ENCODER_X86) || defined(HAVE_DECODER_X86) + { "x86", sizeof(lzma_options_bcj), LZMA_FILTER_X86, + &parse_bcj, bcj_optmap, 1, 1, true }, +#endif + +#if defined(HAVE_ENCODER_ARM) || defined(HAVE_DECODER_ARM) + { "arm", sizeof(lzma_options_bcj), LZMA_FILTER_ARM, + &parse_bcj, bcj_optmap, 1, 1, true }, +#endif + +#if defined(HAVE_ENCODER_ARMTHUMB) || defined(HAVE_DECODER_ARMTHUMB) + { "armthumb", sizeof(lzma_options_bcj), LZMA_FILTER_ARMTHUMB, + &parse_bcj, bcj_optmap, 1, 1, true }, +#endif + +#if defined(HAVE_ENCODER_ARM64) || defined(HAVE_DECODER_ARM64) + { "arm64", sizeof(lzma_options_bcj), LZMA_FILTER_ARM64, + &parse_bcj, bcj_optmap, 1, 1, true }, +#endif + +#if defined(HAVE_ENCODER_POWERPC) || defined(HAVE_DECODER_POWERPC) + { "powerpc", sizeof(lzma_options_bcj), LZMA_FILTER_POWERPC, + &parse_bcj, bcj_optmap, 1, 1, true }, +#endif + +#if defined(HAVE_ENCODER_IA64) || defined(HAVE_DECODER_IA64) + { "ia64", sizeof(lzma_options_bcj), LZMA_FILTER_IA64, + &parse_bcj, bcj_optmap, 1, 1, true }, +#endif + +#if defined(HAVE_ENCODER_SPARC) || defined(HAVE_DECODER_SPARC) + { "sparc", sizeof(lzma_options_bcj), LZMA_FILTER_SPARC, + &parse_bcj, bcj_optmap, 1, 1, true }, +#endif + +#if defined(HAVE_ENCODER_DELTA) || defined(HAVE_DECODER_DELTA) + { "delta", sizeof(lzma_options_delta), LZMA_FILTER_DELTA, + &parse_delta, delta_optmap, 1, 1, false }, +#endif +}; + + +/// Decodes options from a string for one filter (name1=value1,name2=value2). +/// Caller must have allocated memory for filter_options already and set +/// the initial default values. This is called from the filter-specific +/// parse_* functions. +/// +/// The input string starts at *str and the address in str_end is the first +/// char that is not part of the string anymore. So no '\0' terminator is +/// used. *str is advanced everytime something has been decoded successfully. +static const char * +parse_options(const char **const str, const char *str_end, + void *filter_options, + const option_map *const optmap, const size_t optmap_size) +{ + while (*str < str_end && **str != '\0') { + // Each option is of the form name=value. + // Commas (',') separate options. Extra commas are ignored. + // Ignoring extra commas makes it simpler if an optional + // option stored in a shell variable which can be empty. + if (**str == ',') { + ++*str; + continue; + } + + // Find where the next name=value ends. + const size_t str_len = (size_t)(str_end - *str); + const char *name_eq_value_end = memchr(*str, ',', str_len); + if (name_eq_value_end == NULL) + name_eq_value_end = str_end; + + const char *equals_sign = memchr(*str, '=', + (size_t)(name_eq_value_end - *str)); + + // Fail if the '=' wasn't found or the option name is missing + // (the first char is '='). + if (equals_sign == NULL || **str == '=') + return "Options must be 'name=value' pairs separated " + "with commas"; + + // Reject a too long option name so that the memcmp() + // in the loop below won't read past the end of the + // string in optmap[i].name. + const size_t name_len = (size_t)(equals_sign - *str); + if (name_len > NAME_LEN_MAX) + return "Unknown option name"; + + // Find the option name from optmap[]. + size_t i = 0; + while (true) { + if (i == optmap_size) + return "Unknown option name"; + + if (memcmp(*str, optmap[i].name, name_len) == 0 + && optmap[i].name[name_len] == '\0') + break; + + ++i; + } + + // The input string is good at least until the start of + // the option value. + *str = equals_sign + 1; + + // The code assumes that the option value isn't an empty + // string so check it here. + const size_t value_len = (size_t)(name_eq_value_end - *str); + if (value_len == 0) + return "Option value cannot be empty"; + + // LZMA1/2 preset has its own parsing function. + if (optmap[i].type == OPTMAP_TYPE_LZMA_PRESET) { + const char *errmsg = set_lzma12_preset(str, + name_eq_value_end, filter_options); + if (errmsg != NULL) + return errmsg; + + continue; + } + + // It's an integer value. + uint32_t v; + if (optmap[i].flags & OPTMAP_USE_NAME_VALUE_MAP) { + // The integer is picked from a string-to-integer map. + // + // Reject a too long value string so that the memcmp() + // in the loop below won't read past the end of the + // string in optmap[i].u.map[j].name. + if (value_len > NAME_LEN_MAX) + return "Invalid option value"; + + const name_value_map *map = optmap[i].u.map; + size_t j = 0; + while (true) { + // The array is terminated with an empty name. + if (map[j].name[0] == '\0') + return "Invalid option value"; + + if (memcmp(*str, map[j].name, value_len) == 0 + && map[j].name[value_len] + == '\0') { + v = map[j].value; + break; + } + + ++j; + } + } else if (**str < '0' || **str > '9') { + // Note that "max" isn't supported while it is + // supported in xz. It's not useful here. + return "Value is not a non-negative decimal integer"; + } else { + // strtoul() has locale-specific behavior so it cannot + // be relied on to get reproducible results since we + // cannot change the locate in a thread-safe library. + // It also needs '\0'-termination. + // + // Use a temporary pointer so that *str will point + // to the beginning of the value string in case + // an error occurs. + const char *p = *str; + v = 0; + do { + if (v > UINT32_MAX / 10) + return "Value out of range"; + + v *= 10; + + const uint32_t add = (uint32_t)(*p - '0'); + if (UINT32_MAX - add < v) + return "Value out of range"; + + v += add; + ++p; + } while (p < name_eq_value_end + && *p >= '0' && *p <= '9'); + + if (p < name_eq_value_end) { + // Remember this position so that it an be + // used for error messages that are + // specifically about the suffix. (Out of + // range values are about the whole value + // and those error messages point to the + // beginning of the number part, + // not to the suffix.) + const char *multiplier_start = p; + + // If multiplier suffix shouldn't be used + // then don't allow them even if the value + // would stay within limits. This is a somewhat + // unnecessary check but it rejects silly + // things like lzma2:pb=0MiB which xz allows. + if ((optmap[i].flags & OPTMAP_USE_BYTE_SUFFIX) + == 0) { + *str = multiplier_start; + return "This option does not support " + "any integer suffixes"; + } + + uint32_t shift; + + switch (*p) { + case 'k': + case 'K': + shift = 10; + break; + + case 'm': + case 'M': + shift = 20; + break; + + case 'g': + case 'G': + shift = 30; + break; + + default: + *str = multiplier_start; + return "Invalid multiplier suffix " + "(KiB, MiB, or GiB)"; + } + + ++p; + + // Allow "M", "Mi", "MB", "MiB" and the same + // for the other five characters from the + // switch-statement above. All are handled + // as base-2 (perhaps a mistake, perhaps not). + // Note that 'i' and 'B' are case sensitive. + if (p < name_eq_value_end && *p == 'i') + ++p; + + if (p < name_eq_value_end && *p == 'B') + ++p; + + // Now we must have no chars remaining. + if (p < name_eq_value_end) { + *str = multiplier_start; + return "Invalid multiplier suffix " + "(KiB, MiB, or GiB)"; + } + + if (v > (UINT32_MAX >> shift)) + return "Value out of range"; + + v <<= shift; + } + + if (v < optmap[i].u.range.min + || v > optmap[i].u.range.max) + return "Value out of range"; + } + + // Set the value in filter_options. Enums are handled + // specially since the underlying type isn't the same + // as uint32_t on all systems. + void *ptr = (char *)filter_options + optmap[i].offset; + switch (optmap[i].type) { + case OPTMAP_TYPE_LZMA_MODE: + *(lzma_mode *)ptr = (lzma_mode)v; + break; + + case OPTMAP_TYPE_LZMA_MATCH_FINDER: + *(lzma_match_finder *)ptr = (lzma_match_finder)v; + break; + + default: + *(uint32_t *)ptr = v; + break; + } + + // This option has been successfully handled. + *str = name_eq_value_end; + } + + // No errors. + return NULL; +} + + +/// Finds the name of the filter at the beginning of the string and +/// calls filter_name_map[i].parse() to decode the filter-specific options. +/// The caller must have set str_end so that exactly one filter and its +/// options are present without any trailing characters. +static const char * +parse_filter(const char **const str, const char *str_end, lzma_filter *filter, + const lzma_allocator *allocator, bool only_xz) +{ + // Search for a colon or equals sign that would separate the filter + // name from filter options. If neither is found, then the input + // string only contains a filter name and there are no options. + // + // First assume that a colon or equals sign won't be found: + const char *name_end = str_end; + const char *opts_start = str_end; + + for (const char *p = *str; p < str_end; ++p) { + if (*p == ':' || *p == '=') { + name_end = p; + + // Filter options (name1=value1,name2=value2,...) + // begin after the colon or equals sign. + opts_start = p + 1; + break; + } + } + + // Reject a too long filter name so that the memcmp() + // in the loop below won't read past the end of the + // string in filter_name_map[i].name. + const size_t name_len = (size_t)(name_end - *str); + if (name_len > NAME_LEN_MAX) + return "Unknown filter name"; + + for (size_t i = 0; i < ARRAY_SIZE(filter_name_map); ++i) { + if (memcmp(*str, filter_name_map[i].name, name_len) == 0 + && filter_name_map[i].name[name_len] == '\0') { + if (only_xz && filter_name_map[i].id + >= LZMA_FILTER_RESERVED_START) + return "This filter cannot be used in " + "the .xz format"; + + // Allocate the filter-specific options and + // initialize the memory with zeros. + void *options = lzma_alloc_zero( + filter_name_map[i].opts_size, + allocator); + if (options == NULL) + return "Memory allocation failed"; + + // Filter name was found so the input string is good + // at least this far. + *str = opts_start; + + const char *errmsg = filter_name_map[i].parse( + str, str_end, options); + if (errmsg != NULL) { + lzma_free(options, allocator); + return errmsg; + } + + // *filter is modified only when parsing is successful. + filter->id = filter_name_map[i].id; + filter->options = options; + return NULL; + } + } + + return "Unknown filter name"; +} + + +/// Converts the string to a filter chain (array of lzma_filter structures). +/// +/// *str is advanced everytime something has been decoded successfully. +/// This way the caller knows where in the string a possible error occurred. +static const char * +str_to_filters(const char **const str, lzma_filter *filters, uint32_t flags, + const lzma_allocator *allocator) +{ + const char *errmsg; + + // Skip leading spaces. + while (**str == ' ') + ++*str; + + if (**str == '\0') + return "Empty string is not allowed, " + "try \"6\" if a default value is needed"; + + // Detect the type of the string. + // + // A string beginning with a digit or a string beginning with + // one dash and a digit are treated as presets. Trailing spaces + // will be ignored too (leading spaces were already ignored above). + // + // For example, "6", "7 ", "-9e", or " -3 " are treated as presets. + // Strings like "-" or "- " aren't preset. +#define MY_IS_DIGIT(c) ((c) >= '0' && (c) <= '9') + if (MY_IS_DIGIT(**str) || (**str == '-' && MY_IS_DIGIT((*str)[1]))) { + if (**str == '-') + ++*str; + + // Ignore trailing spaces. + const size_t str_len = strlen(*str); + const char *str_end = memchr(*str, ' ', str_len); + if (str_end != NULL) { + // There is at least one trailing space. Check that + // there are no chars other than spaces. + for (size_t i = 1; str_end[i] != '\0'; ++i) + if (str_end[i] != ' ') + return "Unsupported preset"; + } else { + // There are no trailing spaces. Use the whole string. + str_end = *str + str_len; + } + + uint32_t preset; + errmsg = parse_lzma12_preset(str, str_end, &preset); + if (errmsg != NULL) + return errmsg; + + lzma_options_lzma *opts = lzma_alloc(sizeof(*opts), allocator); + if (opts == NULL) + return "Memory allocation failed"; + + if (lzma_lzma_preset(opts, preset)) { + lzma_free(opts, allocator); + return "Unsupported preset"; + } + + filters[0].id = LZMA_FILTER_LZMA2; + filters[0].options = opts; + filters[1].id = LZMA_VLI_UNKNOWN; + filters[1].options = NULL; + + return NULL; + } + + // Not a preset so it must be a filter chain. + // + // If LZMA_STR_ALL_FILTERS isn't used we allow only filters that + // can be used in .xz. + const bool only_xz = (flags & LZMA_STR_ALL_FILTERS) == 0; + + // Use a temporary array so that we don't modify the caller-supplied + // one until we know that no errors occurred. + lzma_filter temp_filters[LZMA_FILTERS_MAX + 1]; + + size_t i = 0; + do { + if (i == LZMA_FILTERS_MAX) { + errmsg = "The maximum number of filters is four"; + goto error; + } + + // Skip "--" if present. + if ((*str)[0] == '-' && (*str)[1] == '-') + *str += 2; + + // Locate the end of "filter:name1=value1,name2=value2", + // stopping at the first "--" or a single space. + const char *filter_end = *str; + while (filter_end[0] != '\0') { + if ((filter_end[0] == '-' && filter_end[1] == '-') + || filter_end[0] == ' ') + break; + + ++filter_end; + } + + // Inputs that have "--" at the end or "-- " in the middle + // will result in an empty filter name. + if (filter_end == *str) { + errmsg = "Filter name is missing"; + goto error; + } + + errmsg = parse_filter(str, filter_end, &temp_filters[i], + allocator, only_xz); + if (errmsg != NULL) + goto error; + + // Skip trailing spaces. + while (**str == ' ') + ++*str; + + ++i; + } while (**str != '\0'); + + // Seems to be good, terminate the array so that + // basic validation can be done. + temp_filters[i].id = LZMA_VLI_UNKNOWN; + temp_filters[i].options = NULL; + + // Do basic validation if the application didn't prohibit it. + if ((flags & LZMA_STR_NO_VALIDATION) == 0) { + size_t dummy; + const lzma_ret ret = lzma_validate_chain(temp_filters, &dummy); + assert(ret == LZMA_OK || ret == LZMA_OPTIONS_ERROR); + if (ret != LZMA_OK) { + errmsg = "Invalid filter chain " + "('lzma2' missing at the end?)"; + goto error; + } + } + + // All good. Copy the filters to the application supplied array. + memcpy(filters, temp_filters, (i + 1) * sizeof(lzma_filter)); + return NULL; + +error: + // Free the filter options that were successfully decoded. + while (i-- > 0) + lzma_free(temp_filters[i].options, allocator); + + return errmsg; +} + + +extern LZMA_API(const char *) +lzma_str_to_filters(const char *str, int *error_pos, lzma_filter *filters, + uint32_t flags, const lzma_allocator *allocator) +{ + if (str == NULL || filters == NULL) + return "Unexpected NULL pointer argument(s) " + "to lzma_str_to_filters()"; + + // Validate the flags. + const uint32_t supported_flags + = LZMA_STR_ALL_FILTERS + | LZMA_STR_NO_VALIDATION; + + if (flags & ~supported_flags) + return "Unsupported flags to lzma_str_to_filters()"; + + const char *used = str; + const char *errmsg = str_to_filters(&used, filters, flags, allocator); + + if (error_pos != NULL) { + const size_t n = (size_t)(used - str); + *error_pos = n > INT_MAX ? INT_MAX : (int)n; + } + + return errmsg; +} + + +/// Converts options of one filter to a string. +/// +/// The caller must have already put the filter name in the destination +/// string. Since it is possible that no options will be needed, the caller +/// won't have put a delimiter character (':' or '=') in the string yet. +/// We will add it if at least one option will be added to the string. +static void +strfy_filter(lzma_str *dest, const char *delimiter, + const option_map *optmap, size_t optmap_count, + const void *filter_options) +{ + for (size_t i = 0; i < optmap_count; ++i) { + // No attempt is made to reverse LZMA1/2 preset. + if (optmap[i].type == OPTMAP_TYPE_LZMA_PRESET) + continue; + + // All options have integer values, some just are mapped + // to a string with a name_value_map. LZMA1/2 preset + // isn't reversed back to preset=PRESET form. + uint32_t v; + const void *ptr + = (const char *)filter_options + optmap[i].offset; + switch (optmap[i].type) { + case OPTMAP_TYPE_LZMA_MODE: + v = *(const lzma_mode *)ptr; + break; + + case OPTMAP_TYPE_LZMA_MATCH_FINDER: + v = *(const lzma_match_finder *)ptr; + break; + + default: + v = *(const uint32_t *)ptr; + break; + } + + // Skip this if this option should be omitted from + // the string when the value is zero. + if (v == 0 && (optmap[i].flags & OPTMAP_NO_STRFY_ZERO)) + continue; + + // Before the first option we add whatever delimiter + // the caller gave us. For later options a comma is used. + str_append_str(dest, delimiter); + delimiter = ","; + + // Add the option name and equals sign. + str_append_str(dest, optmap[i].name); + str_append_str(dest, "="); + + if (optmap[i].flags & OPTMAP_USE_NAME_VALUE_MAP) { + const name_value_map *map = optmap[i].u.map; + size_t j = 0; + while (true) { + if (map[j].name[0] == '\0') { + str_append_str(dest, "UNKNOWN"); + break; + } + + if (map[j].value == v) { + str_append_str(dest, map[j].name); + break; + } + + ++j; + } + } else { + str_append_u32(dest, v, + optmap[i].flags & OPTMAP_USE_BYTE_SUFFIX); + } + } + + return; +} + + +extern LZMA_API(lzma_ret) +lzma_str_from_filters(char **output_str, const lzma_filter *filters, + uint32_t flags, const lzma_allocator *allocator) +{ + // On error *output_str is always set to NULL. + // Do it as the very first step. + if (output_str == NULL) + return LZMA_PROG_ERROR; + + *output_str = NULL; + + if (filters == NULL) + return LZMA_PROG_ERROR; + + // Validate the flags. + const uint32_t supported_flags + = LZMA_STR_ENCODER + | LZMA_STR_DECODER + | LZMA_STR_GETOPT_LONG + | LZMA_STR_NO_SPACES; + + if (flags & ~supported_flags) + return LZMA_OPTIONS_ERROR; + + // There must be at least one filter. + if (filters[0].id == LZMA_VLI_UNKNOWN) + return LZMA_OPTIONS_ERROR; + + // Allocate memory for the output string. + lzma_str dest; + return_if_error(str_init(&dest, allocator)); + + const bool show_opts = (flags & (LZMA_STR_ENCODER | LZMA_STR_DECODER)); + + const char *opt_delim = (flags & LZMA_STR_GETOPT_LONG) ? "=" : ":"; + + for (size_t i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i) { + // Don't add a space between filters if the caller + // doesn't want them. + if (i > 0 && !(flags & LZMA_STR_NO_SPACES)) + str_append_str(&dest, " "); + + // Use dashes for xz getopt_long() compatible syntax but also + // use dashes to separate filters when spaces weren't wanted. + if ((flags & LZMA_STR_GETOPT_LONG) + || (i > 0 && (flags & LZMA_STR_NO_SPACES))) + str_append_str(&dest, "--"); + + size_t j = 0; + while (true) { + if (j == ARRAY_SIZE(filter_name_map)) { + // Filter ID in filters[i].id isn't supported. + str_free(&dest, allocator); + return LZMA_OPTIONS_ERROR; + } + + if (filter_name_map[j].id == filters[i].id) { + // Add the filter name. + str_append_str(&dest, filter_name_map[j].name); + + // If only the filter names were wanted then + // skip to the next filter. In this case + // .options is ignored and may be NULL even + // when the filter doesn't allow NULL options. + if (!show_opts) + break; + + if (filters[i].options == NULL) { + if (!filter_name_map[j].allow_null) { + // Filter-specific options + // are missing but with + // this filter the options + // structure is mandatory. + str_free(&dest, allocator); + return LZMA_OPTIONS_ERROR; + } + + // .options is allowed to be NULL. + // There is no need to add any + // options to the string. + break; + } + + // Options structure is available. Add + // the filter options to the string. + const size_t optmap_count + = (flags & LZMA_STR_ENCODER) + ? filter_name_map[j].strfy_encoder + : filter_name_map[j].strfy_decoder; + strfy_filter(&dest, opt_delim, + filter_name_map[j].optmap, + optmap_count, + filters[i].options); + break; + } + + ++j; + } + } + + return str_finish(output_str, &dest, allocator); +} + + +extern LZMA_API(lzma_ret) +lzma_str_list_filters(char **output_str, lzma_vli filter_id, uint32_t flags, + const lzma_allocator *allocator) +{ + // On error *output_str is always set to NULL. + // Do it as the very first step. + if (output_str == NULL) + return LZMA_PROG_ERROR; + + *output_str = NULL; + + // Validate the flags. + const uint32_t supported_flags + = LZMA_STR_ALL_FILTERS + | LZMA_STR_ENCODER + | LZMA_STR_DECODER + | LZMA_STR_GETOPT_LONG; + + if (flags & ~supported_flags) + return LZMA_OPTIONS_ERROR; + + // Allocate memory for the output string. + lzma_str dest; + return_if_error(str_init(&dest, allocator)); + + // If only listing the filter names then separate them with spaces. + // Otherwise use newlines. + const bool show_opts = (flags & (LZMA_STR_ENCODER | LZMA_STR_DECODER)); + const char *filter_delim = show_opts ? "\n" : " "; + + const char *opt_delim = (flags & LZMA_STR_GETOPT_LONG) ? "=" : ":"; + bool first_filter_printed = false; + + for (size_t i = 0; i < ARRAY_SIZE(filter_name_map); ++i) { + // If we are printing only one filter then skip others. + if (filter_id != LZMA_VLI_UNKNOWN + && filter_id != filter_name_map[i].id) + continue; + + // If we are printing only .xz filters then skip the others. + if (filter_name_map[i].id >= LZMA_FILTER_RESERVED_START + && (flags & LZMA_STR_ALL_FILTERS) == 0 + && filter_id == LZMA_VLI_UNKNOWN) + continue; + + // Add a new line if this isn't the first filter being + // written to the string. + if (first_filter_printed) + str_append_str(&dest, filter_delim); + + first_filter_printed = true; + + if (flags & LZMA_STR_GETOPT_LONG) + str_append_str(&dest, "--"); + + str_append_str(&dest, filter_name_map[i].name); + + // If only the filter names were wanted then continue + // to the next filter. + if (!show_opts) + continue; + + const option_map *optmap = filter_name_map[i].optmap; + const char *d = opt_delim; + + const size_t end = (flags & LZMA_STR_ENCODER) + ? filter_name_map[i].strfy_encoder + : filter_name_map[i].strfy_decoder; + + for (size_t j = 0; j < end; ++j) { + // The first option is delimited from the filter + // name using "=" or ":" and the rest of the options + // are separated with ",". + str_append_str(&dest, d); + d = ","; + + // optname= + str_append_str(&dest, optmap[j].name); + str_append_str(&dest, "=<"); + + if (optmap[j].type == OPTMAP_TYPE_LZMA_PRESET) { + // LZMA1/2 preset has its custom help string. + str_append_str(&dest, LZMA12_PRESET_STR); + } else if (optmap[j].flags + & OPTMAP_USE_NAME_VALUE_MAP) { + // Separate the possible option values by "|". + const name_value_map *m = optmap[j].u.map; + for (size_t k = 0; m[k].name[0] != '\0'; ++k) { + if (k > 0) + str_append_str(&dest, "|"); + + str_append_str(&dest, m[k].name); + } + } else { + // Integer range is shown as min-max. + const bool use_byte_suffix = optmap[j].flags + & OPTMAP_USE_BYTE_SUFFIX; + str_append_u32(&dest, optmap[j].u.range.min, + use_byte_suffix); + str_append_str(&dest, "-"); + str_append_u32(&dest, optmap[j].u.range.max, + use_byte_suffix); + } + + str_append_str(&dest, ">"); + } + } + + // If no filters were added to the string then it must be because + // the caller provided an unsupported Filter ID. + if (!first_filter_printed) { + str_free(&dest, allocator); + return LZMA_OPTIONS_ERROR; + } + + return str_finish(output_str, &dest, allocator); +} diff --git a/src/liblzma/common/vli_decoder.c b/src/liblzma/common/vli_decoder.c new file mode 100644 index 0000000..af2799d --- /dev/null +++ b/src/liblzma/common/vli_decoder.c @@ -0,0 +1,86 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file vli_decoder.c +/// \brief Decodes variable-length integers +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +extern LZMA_API(lzma_ret) +lzma_vli_decode(lzma_vli *restrict vli, size_t *vli_pos, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size) +{ + // If we haven't been given vli_pos, work in single-call mode. + size_t vli_pos_internal = 0; + if (vli_pos == NULL) { + vli_pos = &vli_pos_internal; + *vli = 0; + + // If there's no input, use LZMA_DATA_ERROR. This way it is + // easy to decode VLIs from buffers that have known size, + // and get the correct error code in case the buffer is + // too short. + if (*in_pos >= in_size) + return LZMA_DATA_ERROR; + + } else { + // Initialize *vli when starting to decode a new integer. + if (*vli_pos == 0) + *vli = 0; + + // Validate the arguments. + if (*vli_pos >= LZMA_VLI_BYTES_MAX + || (*vli >> (*vli_pos * 7)) != 0) + return LZMA_PROG_ERROR;; + + if (*in_pos >= in_size) + return LZMA_BUF_ERROR; + } + + do { + // Read the next byte. Use a temporary variable so that we + // can update *in_pos immediately. + const uint8_t byte = in[*in_pos]; + ++*in_pos; + + // Add the newly read byte to *vli. + *vli += (lzma_vli)(byte & 0x7F) << (*vli_pos * 7); + ++*vli_pos; + + // Check if this is the last byte of a multibyte integer. + if ((byte & 0x80) == 0) { + // We don't allow using variable-length integers as + // padding i.e. the encoding must use the most the + // compact form. + if (byte == 0x00 && *vli_pos > 1) + return LZMA_DATA_ERROR; + + return vli_pos == &vli_pos_internal + ? LZMA_OK : LZMA_STREAM_END; + } + + // There is at least one more byte coming. If we have already + // read maximum number of bytes, the integer is considered + // corrupt. + // + // If we need bigger integers in future, old versions liblzma + // will confusingly indicate the file being corrupt instead of + // unsupported. I suppose it's still better this way, because + // in the foreseeable future (writing this in 2008) the only + // reason why files would appear having over 63-bit integers + // is that the files are simply corrupt. + if (*vli_pos == LZMA_VLI_BYTES_MAX) + return LZMA_DATA_ERROR; + + } while (*in_pos < in_size); + + return vli_pos == &vli_pos_internal ? LZMA_DATA_ERROR : LZMA_OK; +} diff --git a/src/liblzma/common/vli_encoder.c b/src/liblzma/common/vli_encoder.c new file mode 100644 index 0000000..f864269 --- /dev/null +++ b/src/liblzma/common/vli_encoder.c @@ -0,0 +1,69 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file vli_encoder.c +/// \brief Encodes variable-length integers +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +extern LZMA_API(lzma_ret) +lzma_vli_encode(lzma_vli vli, size_t *vli_pos, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size) +{ + // If we haven't been given vli_pos, work in single-call mode. + size_t vli_pos_internal = 0; + if (vli_pos == NULL) { + vli_pos = &vli_pos_internal; + + // In single-call mode, we expect that the caller has + // reserved enough output space. + if (*out_pos >= out_size) + return LZMA_PROG_ERROR; + } else { + // This never happens when we are called by liblzma, but + // may happen if called directly from an application. + if (*out_pos >= out_size) + return LZMA_BUF_ERROR; + } + + // Validate the arguments. + if (*vli_pos >= LZMA_VLI_BYTES_MAX || vli > LZMA_VLI_MAX) + return LZMA_PROG_ERROR; + + // Shift vli so that the next bits to encode are the lowest. In + // single-call mode this never changes vli since *vli_pos is zero. + vli >>= *vli_pos * 7; + + // Write the non-last bytes in a loop. + while (vli >= 0x80) { + // We don't need *vli_pos during this function call anymore, + // but update it here so that it is ready if we need to + // return before the whole integer has been decoded. + ++*vli_pos; + assert(*vli_pos < LZMA_VLI_BYTES_MAX); + + // Write the next byte. + out[*out_pos] = (uint8_t)(vli) | 0x80; + vli >>= 7; + + if (++*out_pos == out_size) + return vli_pos == &vli_pos_internal + ? LZMA_PROG_ERROR : LZMA_OK; + } + + // Write the last byte. + out[*out_pos] = (uint8_t)(vli); + ++*out_pos; + ++*vli_pos; + + return vli_pos == &vli_pos_internal ? LZMA_OK : LZMA_STREAM_END; + +} diff --git a/src/liblzma/common/vli_size.c b/src/liblzma/common/vli_size.c new file mode 100644 index 0000000..ec1b4fa --- /dev/null +++ b/src/liblzma/common/vli_size.c @@ -0,0 +1,30 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file vli_size.c +/// \brief Calculates the encoded size of a variable-length integer +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +extern LZMA_API(uint32_t) +lzma_vli_size(lzma_vli vli) +{ + if (vli > LZMA_VLI_MAX) + return 0; + + uint32_t i = 0; + do { + vli >>= 7; + ++i; + } while (vli != 0); + + assert(i <= LZMA_VLI_BYTES_MAX); + return i; +} diff --git a/src/liblzma/delta/Makefile.inc b/src/liblzma/delta/Makefile.inc new file mode 100644 index 0000000..c7739b4 --- /dev/null +++ b/src/liblzma/delta/Makefile.inc @@ -0,0 +1,23 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +liblzma_la_SOURCES += \ + delta/delta_common.c \ + delta/delta_common.h \ + delta/delta_private.h + +if COND_ENCODER_DELTA +liblzma_la_SOURCES += \ + delta/delta_encoder.c \ + delta/delta_encoder.h +endif + +if COND_DECODER_DELTA +liblzma_la_SOURCES += \ + delta/delta_decoder.c \ + delta/delta_decoder.h +endif diff --git a/src/liblzma/delta/delta_common.c b/src/liblzma/delta/delta_common.c new file mode 100644 index 0000000..4768201 --- /dev/null +++ b/src/liblzma/delta/delta_common.c @@ -0,0 +1,73 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file delta_common.c +/// \brief Common stuff for Delta encoder and decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "delta_common.h" +#include "delta_private.h" + + +static void +delta_coder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_delta_coder *coder = coder_ptr; + lzma_next_end(&coder->next, allocator); + lzma_free(coder, allocator); + return; +} + + +extern lzma_ret +lzma_delta_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + // Allocate memory for the decoder if needed. + lzma_delta_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_delta_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + + // End function is the same for encoder and decoder. + next->end = &delta_coder_end; + coder->next = LZMA_NEXT_CODER_INIT; + } + + // Validate the options. + if (lzma_delta_coder_memusage(filters[0].options) == UINT64_MAX) + return LZMA_OPTIONS_ERROR; + + // Set the delta distance. + const lzma_options_delta *opt = filters[0].options; + coder->distance = opt->dist; + + // Initialize the rest of the variables. + coder->pos = 0; + memzero(coder->history, LZMA_DELTA_DIST_MAX); + + // Initialize the next decoder in the chain, if any. + return lzma_next_filter_init(&coder->next, allocator, filters + 1); +} + + +extern uint64_t +lzma_delta_coder_memusage(const void *options) +{ + const lzma_options_delta *opt = options; + + if (opt == NULL || opt->type != LZMA_DELTA_TYPE_BYTE + || opt->dist < LZMA_DELTA_DIST_MIN + || opt->dist > LZMA_DELTA_DIST_MAX) + return UINT64_MAX; + + return sizeof(lzma_delta_coder); +} diff --git a/src/liblzma/delta/delta_common.h b/src/liblzma/delta/delta_common.h new file mode 100644 index 0000000..7e7e1ba --- /dev/null +++ b/src/liblzma/delta/delta_common.h @@ -0,0 +1,20 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file delta_common.h +/// \brief Common stuff for Delta encoder and decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_DELTA_COMMON_H +#define LZMA_DELTA_COMMON_H + +#include "common.h" + +extern uint64_t lzma_delta_coder_memusage(const void *options); + +#endif diff --git a/src/liblzma/delta/delta_decoder.c b/src/liblzma/delta/delta_decoder.c new file mode 100644 index 0000000..13d8a28 --- /dev/null +++ b/src/liblzma/delta/delta_decoder.c @@ -0,0 +1,78 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file delta_decoder.c +/// \brief Delta filter decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "delta_decoder.h" +#include "delta_private.h" + + +static void +decode_buffer(lzma_delta_coder *coder, uint8_t *buffer, size_t size) +{ + const size_t distance = coder->distance; + + for (size_t i = 0; i < size; ++i) { + buffer[i] += coder->history[(distance + coder->pos) & 0xFF]; + coder->history[coder->pos-- & 0xFF] = buffer[i]; + } +} + + +static lzma_ret +delta_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_delta_coder *coder = coder_ptr; + + assert(coder->next.code != NULL); + + const size_t out_start = *out_pos; + + const lzma_ret ret = coder->next.code(coder->next.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, + action); + + decode_buffer(coder, out + out_start, *out_pos - out_start); + + return ret; +} + + +extern lzma_ret +lzma_delta_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + next->code = &delta_decode; + return lzma_delta_coder_init(next, allocator, filters); +} + + +extern lzma_ret +lzma_delta_props_decode(void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size) +{ + if (props_size != 1) + return LZMA_OPTIONS_ERROR; + + lzma_options_delta *opt + = lzma_alloc(sizeof(lzma_options_delta), allocator); + if (opt == NULL) + return LZMA_MEM_ERROR; + + opt->type = LZMA_DELTA_TYPE_BYTE; + opt->dist = props[0] + 1U; + + *options = opt; + + return LZMA_OK; +} diff --git a/src/liblzma/delta/delta_decoder.h b/src/liblzma/delta/delta_decoder.h new file mode 100644 index 0000000..ad89cc6 --- /dev/null +++ b/src/liblzma/delta/delta_decoder.h @@ -0,0 +1,26 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file delta_decoder.h +/// \brief Delta filter decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_DELTA_DECODER_H +#define LZMA_DELTA_DECODER_H + +#include "delta_common.h" + +extern lzma_ret lzma_delta_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_delta_props_decode( + void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size); + +#endif diff --git a/src/liblzma/delta/delta_encoder.c b/src/liblzma/delta/delta_encoder.c new file mode 100644 index 0000000..3841651 --- /dev/null +++ b/src/liblzma/delta/delta_encoder.c @@ -0,0 +1,125 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file delta_encoder.c +/// \brief Delta filter encoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "delta_encoder.h" +#include "delta_private.h" + + +/// Copies and encodes the data at the same time. This is used when Delta +/// is the first filter in the chain (and thus the last filter in the +/// encoder's filter stack). +static void +copy_and_encode(lzma_delta_coder *coder, + const uint8_t *restrict in, uint8_t *restrict out, size_t size) +{ + const size_t distance = coder->distance; + + for (size_t i = 0; i < size; ++i) { + const uint8_t tmp = coder->history[ + (distance + coder->pos) & 0xFF]; + coder->history[coder->pos-- & 0xFF] = in[i]; + out[i] = in[i] - tmp; + } +} + + +/// Encodes the data in place. This is used when we are the last filter +/// in the chain (and thus non-last filter in the encoder's filter stack). +static void +encode_in_place(lzma_delta_coder *coder, uint8_t *buffer, size_t size) +{ + const size_t distance = coder->distance; + + for (size_t i = 0; i < size; ++i) { + const uint8_t tmp = coder->history[ + (distance + coder->pos) & 0xFF]; + coder->history[coder->pos-- & 0xFF] = buffer[i]; + buffer[i] -= tmp; + } +} + + +static lzma_ret +delta_encode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_delta_coder *coder = coder_ptr; + + lzma_ret ret; + + if (coder->next.code == NULL) { + const size_t in_avail = in_size - *in_pos; + const size_t out_avail = out_size - *out_pos; + const size_t size = my_min(in_avail, out_avail); + + copy_and_encode(coder, in + *in_pos, out + *out_pos, size); + + *in_pos += size; + *out_pos += size; + + ret = action != LZMA_RUN && *in_pos == in_size + ? LZMA_STREAM_END : LZMA_OK; + + } else { + const size_t out_start = *out_pos; + + ret = coder->next.code(coder->next.coder, allocator, + in, in_pos, in_size, out, out_pos, out_size, + action); + + encode_in_place(coder, out + out_start, *out_pos - out_start); + } + + return ret; +} + + +static lzma_ret +delta_encoder_update(void *coder_ptr, const lzma_allocator *allocator, + const lzma_filter *filters_null lzma_attribute((__unused__)), + const lzma_filter *reversed_filters) +{ + lzma_delta_coder *coder = coder_ptr; + + // Delta doesn't and will never support changing the options in + // the middle of encoding. If the app tries to change them, we + // simply ignore them. + return lzma_next_filter_update( + &coder->next, allocator, reversed_filters + 1); +} + + +extern lzma_ret +lzma_delta_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + next->code = &delta_encode; + next->update = &delta_encoder_update; + return lzma_delta_coder_init(next, allocator, filters); +} + + +extern lzma_ret +lzma_delta_props_encode(const void *options, uint8_t *out) +{ + // The caller must have already validated the options, so it's + // LZMA_PROG_ERROR if they are invalid. + if (lzma_delta_coder_memusage(options) == UINT64_MAX) + return LZMA_PROG_ERROR; + + const lzma_options_delta *opt = options; + out[0] = opt->dist - LZMA_DELTA_DIST_MIN; + + return LZMA_OK; +} diff --git a/src/liblzma/delta/delta_encoder.h b/src/liblzma/delta/delta_encoder.h new file mode 100644 index 0000000..4ab9847 --- /dev/null +++ b/src/liblzma/delta/delta_encoder.h @@ -0,0 +1,24 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file delta_encoder.h +/// \brief Delta filter encoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_DELTA_ENCODER_H +#define LZMA_DELTA_ENCODER_H + +#include "delta_common.h" + +extern lzma_ret lzma_delta_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_delta_props_encode(const void *options, uint8_t *out); + +#endif diff --git a/src/liblzma/delta/delta_private.h b/src/liblzma/delta/delta_private.h new file mode 100644 index 0000000..0d6cb38 --- /dev/null +++ b/src/liblzma/delta/delta_private.h @@ -0,0 +1,37 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file delta_private.h +/// \brief Private common stuff for Delta encoder and decoder +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_DELTA_PRIVATE_H +#define LZMA_DELTA_PRIVATE_H + +#include "delta_common.h" + +typedef struct { + /// Next coder in the chain + lzma_next_coder next; + + /// Delta distance + size_t distance; + + /// Position in history[] + uint8_t pos; + + /// Buffer to hold history of the original data + uint8_t history[LZMA_DELTA_DIST_MAX]; +} lzma_delta_coder; + + +extern lzma_ret lzma_delta_coder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters); + +#endif diff --git a/src/liblzma/liblzma.pc.in b/src/liblzma/liblzma.pc.in new file mode 100644 index 0000000..9fa4891 --- /dev/null +++ b/src/liblzma/liblzma.pc.in @@ -0,0 +1,19 @@ +# +# Author: Lasse Collin +# +# This file has been put into the public domain. +# You can do whatever you want with this file. +# + +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: liblzma +Description: General purpose data compression library +URL: @PACKAGE_URL@ +Version: @PACKAGE_VERSION@ +Cflags: -I${includedir} +Libs: -L${libdir} -llzma +Libs.private: @PTHREAD_CFLAGS@ @LIBS@ diff --git a/src/liblzma/liblzma_generic.map b/src/liblzma/liblzma_generic.map new file mode 100644 index 0000000..bb82167 --- /dev/null +++ b/src/liblzma/liblzma_generic.map @@ -0,0 +1,121 @@ +XZ_5.0 { +global: + lzma_alone_decoder; + lzma_alone_encoder; + lzma_auto_decoder; + lzma_block_buffer_bound; + lzma_block_buffer_decode; + lzma_block_buffer_encode; + lzma_block_compressed_size; + lzma_block_decoder; + lzma_block_encoder; + lzma_block_header_decode; + lzma_block_header_encode; + lzma_block_header_size; + lzma_block_total_size; + lzma_block_unpadded_size; + lzma_check_is_supported; + lzma_check_size; + lzma_code; + lzma_crc32; + lzma_crc64; + lzma_easy_buffer_encode; + lzma_easy_decoder_memusage; + lzma_easy_encoder; + lzma_easy_encoder_memusage; + lzma_end; + lzma_filter_decoder_is_supported; + lzma_filter_encoder_is_supported; + lzma_filter_flags_decode; + lzma_filter_flags_encode; + lzma_filter_flags_size; + lzma_filters_copy; + lzma_filters_update; + lzma_get_check; + lzma_index_append; + lzma_index_block_count; + lzma_index_buffer_decode; + lzma_index_buffer_encode; + lzma_index_cat; + lzma_index_checks; + lzma_index_decoder; + lzma_index_dup; + lzma_index_encoder; + lzma_index_end; + lzma_index_file_size; + lzma_index_hash_append; + lzma_index_hash_decode; + lzma_index_hash_end; + lzma_index_hash_init; + lzma_index_hash_size; + lzma_index_init; + lzma_index_iter_init; + lzma_index_iter_locate; + lzma_index_iter_next; + lzma_index_iter_rewind; + lzma_index_memusage; + lzma_index_memused; + lzma_index_size; + lzma_index_stream_count; + lzma_index_stream_flags; + lzma_index_stream_padding; + lzma_index_stream_size; + lzma_index_total_size; + lzma_index_uncompressed_size; + lzma_lzma_preset; + lzma_memlimit_get; + lzma_memlimit_set; + lzma_memusage; + lzma_mf_is_supported; + lzma_mode_is_supported; + lzma_physmem; + lzma_properties_decode; + lzma_properties_encode; + lzma_properties_size; + lzma_raw_buffer_decode; + lzma_raw_buffer_encode; + lzma_raw_decoder; + lzma_raw_decoder_memusage; + lzma_raw_encoder; + lzma_raw_encoder_memusage; + lzma_stream_buffer_bound; + lzma_stream_buffer_decode; + lzma_stream_buffer_encode; + lzma_stream_decoder; + lzma_stream_encoder; + lzma_stream_flags_compare; + lzma_stream_footer_decode; + lzma_stream_footer_encode; + lzma_stream_header_decode; + lzma_stream_header_encode; + lzma_version_number; + lzma_version_string; + lzma_vli_decode; + lzma_vli_encode; + lzma_vli_size; + +local: + *; +}; + +XZ_5.2 { +global: + lzma_block_uncomp_encode; + lzma_cputhreads; + lzma_get_progress; + lzma_stream_encoder_mt; + lzma_stream_encoder_mt_memusage; +} XZ_5.0; + +XZ_5.4 { +global: + lzma_file_info_decoder; + lzma_filters_free; + lzma_lzip_decoder; + lzma_microlzma_decoder; + lzma_microlzma_encoder; + lzma_stream_decoder_mt; + lzma_str_from_filters; + lzma_str_list_filters; + lzma_str_to_filters; +} XZ_5.2; diff --git a/src/liblzma/liblzma_linux.map b/src/liblzma/liblzma_linux.map new file mode 100644 index 0000000..449f5fd --- /dev/null +++ b/src/liblzma/liblzma_linux.map @@ -0,0 +1,136 @@ +XZ_5.0 { +global: + lzma_alone_decoder; + lzma_alone_encoder; + lzma_auto_decoder; + lzma_block_buffer_bound; + lzma_block_buffer_decode; + lzma_block_buffer_encode; + lzma_block_compressed_size; + lzma_block_decoder; + lzma_block_encoder; + lzma_block_header_decode; + lzma_block_header_encode; + lzma_block_header_size; + lzma_block_total_size; + lzma_block_unpadded_size; + lzma_check_is_supported; + lzma_check_size; + lzma_code; + lzma_crc32; + lzma_crc64; + lzma_easy_buffer_encode; + lzma_easy_decoder_memusage; + lzma_easy_encoder; + lzma_easy_encoder_memusage; + lzma_end; + lzma_filter_decoder_is_supported; + lzma_filter_encoder_is_supported; + lzma_filter_flags_decode; + lzma_filter_flags_encode; + lzma_filter_flags_size; + lzma_filters_copy; + lzma_filters_update; + lzma_get_check; + lzma_index_append; + lzma_index_block_count; + lzma_index_buffer_decode; + lzma_index_buffer_encode; + lzma_index_cat; + lzma_index_checks; + lzma_index_decoder; + lzma_index_dup; + lzma_index_encoder; + lzma_index_end; + lzma_index_file_size; + lzma_index_hash_append; + lzma_index_hash_decode; + lzma_index_hash_end; + lzma_index_hash_init; + lzma_index_hash_size; + lzma_index_init; + lzma_index_iter_init; + lzma_index_iter_locate; + lzma_index_iter_next; + lzma_index_iter_rewind; + lzma_index_memusage; + lzma_index_memused; + lzma_index_size; + lzma_index_stream_count; + lzma_index_stream_flags; + lzma_index_stream_padding; + lzma_index_stream_size; + lzma_index_total_size; + lzma_index_uncompressed_size; + lzma_lzma_preset; + lzma_memlimit_get; + lzma_memlimit_set; + lzma_memusage; + lzma_mf_is_supported; + lzma_mode_is_supported; + lzma_physmem; + lzma_properties_decode; + lzma_properties_encode; + lzma_properties_size; + lzma_raw_buffer_decode; + lzma_raw_buffer_encode; + lzma_raw_decoder; + lzma_raw_decoder_memusage; + lzma_raw_encoder; + lzma_raw_encoder_memusage; + lzma_stream_buffer_bound; + lzma_stream_buffer_decode; + lzma_stream_buffer_encode; + lzma_stream_decoder; + lzma_stream_encoder; + lzma_stream_flags_compare; + lzma_stream_footer_decode; + lzma_stream_footer_encode; + lzma_stream_header_decode; + lzma_stream_header_encode; + lzma_version_number; + lzma_version_string; + lzma_vli_decode; + lzma_vli_encode; + lzma_vli_size; + +local: + *; +}; + +XZ_5.2 { +global: + lzma_block_uncomp_encode; + lzma_cputhreads; + lzma_get_progress; + lzma_stream_encoder_mt; + lzma_stream_encoder_mt_memusage; +} XZ_5.0; + +XZ_5.1.2alpha { +global: + lzma_stream_encoder_mt; + lzma_stream_encoder_mt_memusage; +} XZ_5.0; + +XZ_5.2.2 { +global: + lzma_block_uncomp_encode; + lzma_cputhreads; + lzma_get_progress; + lzma_stream_encoder_mt; + lzma_stream_encoder_mt_memusage; +} XZ_5.1.2alpha; + +XZ_5.4 { +global: + lzma_file_info_decoder; + lzma_filters_free; + lzma_lzip_decoder; + lzma_microlzma_decoder; + lzma_microlzma_encoder; + lzma_stream_decoder_mt; + lzma_str_from_filters; + lzma_str_list_filters; + lzma_str_to_filters; +} XZ_5.2; diff --git a/src/liblzma/liblzma_w32res.rc b/src/liblzma/liblzma_w32res.rc new file mode 100644 index 0000000..d4d8159 --- /dev/null +++ b/src/liblzma/liblzma_w32res.rc @@ -0,0 +1,12 @@ +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#define MY_TYPE VFT_DLL +#define MY_NAME "liblzma" +#define MY_SUFFIX ".dll" +#define MY_DESC "liblzma data compression library" +#include "common_w32res.rc" diff --git a/src/liblzma/lz/Makefile.inc b/src/liblzma/lz/Makefile.inc new file mode 100644 index 0000000..75742a8 --- /dev/null +++ b/src/liblzma/lz/Makefile.inc @@ -0,0 +1,22 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +if COND_ENCODER_LZ +liblzma_la_SOURCES += \ + lz/lz_encoder.c \ + lz/lz_encoder.h \ + lz/lz_encoder_hash.h \ + lz/lz_encoder_hash_table.h \ + lz/lz_encoder_mf.c +endif + + +if COND_DECODER_LZ +liblzma_la_SOURCES += \ + lz/lz_decoder.c \ + lz/lz_decoder.h +endif diff --git a/src/liblzma/lz/lz_decoder.c b/src/liblzma/lz/lz_decoder.c new file mode 100644 index 0000000..06c95c1 --- /dev/null +++ b/src/liblzma/lz/lz_decoder.c @@ -0,0 +1,304 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lz_decoder.c +/// \brief LZ out window +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +// liblzma supports multiple LZ77-based filters. The LZ part is shared +// between these filters. The LZ code takes care of dictionary handling +// and passing the data between filters in the chain. The filter-specific +// part decodes from the input buffer to the dictionary. + + +#include "lz_decoder.h" + + +typedef struct { + /// Dictionary (history buffer) + lzma_dict dict; + + /// The actual LZ-based decoder e.g. LZMA + lzma_lz_decoder lz; + + /// Next filter in the chain, if any. Note that LZMA and LZMA2 are + /// only allowed as the last filter, but the long-range filter in + /// future can be in the middle of the chain. + lzma_next_coder next; + + /// True if the next filter in the chain has returned LZMA_STREAM_END. + bool next_finished; + + /// True if the LZ decoder (e.g. LZMA) has detected end of payload + /// marker. This may become true before next_finished becomes true. + bool this_finished; + + /// Temporary buffer needed when the LZ-based filter is not the last + /// filter in the chain. The output of the next filter is first + /// decoded into buffer[], which is then used as input for the actual + /// LZ-based decoder. + struct { + size_t pos; + size_t size; + uint8_t buffer[LZMA_BUFFER_SIZE]; + } temp; +} lzma_coder; + + +static void +lz_decoder_reset(lzma_coder *coder) +{ + coder->dict.pos = 0; + coder->dict.full = 0; + coder->dict.buf[coder->dict.size - 1] = '\0'; + coder->dict.need_reset = false; + return; +} + + +static lzma_ret +decode_buffer(lzma_coder *coder, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size) +{ + while (true) { + // Wrap the dictionary if needed. + if (coder->dict.pos == coder->dict.size) + coder->dict.pos = 0; + + // Store the current dictionary position. It is needed to know + // where to start copying to the out[] buffer. + const size_t dict_start = coder->dict.pos; + + // Calculate how much we allow coder->lz.code() to decode. + // It must not decode past the end of the dictionary + // buffer, and we don't want it to decode more than is + // actually needed to fill the out[] buffer. + coder->dict.limit = coder->dict.pos + + my_min(out_size - *out_pos, + coder->dict.size - coder->dict.pos); + + // Call the coder->lz.code() to do the actual decoding. + const lzma_ret ret = coder->lz.code( + coder->lz.coder, &coder->dict, + in, in_pos, in_size); + + // Copy the decoded data from the dictionary to the out[] + // buffer. Do it conditionally because out can be NULL + // (in which case copy_size is always 0). Calling memcpy() + // with a null-pointer is undefined even if the third + // argument is 0. + const size_t copy_size = coder->dict.pos - dict_start; + assert(copy_size <= out_size - *out_pos); + + if (copy_size > 0) + memcpy(out + *out_pos, coder->dict.buf + dict_start, + copy_size); + + *out_pos += copy_size; + + // Reset the dictionary if so requested by coder->lz.code(). + if (coder->dict.need_reset) { + lz_decoder_reset(coder); + + // Since we reset dictionary, we don't check if + // dictionary became full. + if (ret != LZMA_OK || *out_pos == out_size) + return ret; + } else { + // Return if everything got decoded or an error + // occurred, or if there's no more data to decode. + // + // Note that detecting if there's something to decode + // is done by looking if dictionary become full + // instead of looking if *in_pos == in_size. This + // is because it is possible that all the input was + // consumed already but some data is pending to be + // written to the dictionary. + if (ret != LZMA_OK || *out_pos == out_size + || coder->dict.pos < coder->dict.size) + return ret; + } + } +} + + +static lzma_ret +lz_decode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, + lzma_action action) +{ + lzma_coder *coder = coder_ptr; + + if (coder->next.code == NULL) + return decode_buffer(coder, in, in_pos, in_size, + out, out_pos, out_size); + + // We aren't the last coder in the chain, we need to decode + // our input to a temporary buffer. + while (*out_pos < out_size) { + // Fill the temporary buffer if it is empty. + if (!coder->next_finished + && coder->temp.pos == coder->temp.size) { + coder->temp.pos = 0; + coder->temp.size = 0; + + const lzma_ret ret = coder->next.code( + coder->next.coder, + allocator, in, in_pos, in_size, + coder->temp.buffer, &coder->temp.size, + LZMA_BUFFER_SIZE, action); + + if (ret == LZMA_STREAM_END) + coder->next_finished = true; + else if (ret != LZMA_OK || coder->temp.size == 0) + return ret; + } + + if (coder->this_finished) { + if (coder->temp.size != 0) + return LZMA_DATA_ERROR; + + if (coder->next_finished) + return LZMA_STREAM_END; + + return LZMA_OK; + } + + const lzma_ret ret = decode_buffer(coder, coder->temp.buffer, + &coder->temp.pos, coder->temp.size, + out, out_pos, out_size); + + if (ret == LZMA_STREAM_END) + coder->this_finished = true; + else if (ret != LZMA_OK) + return ret; + else if (coder->next_finished && *out_pos < out_size) + return LZMA_DATA_ERROR; + } + + return LZMA_OK; +} + + +static void +lz_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_coder *coder = coder_ptr; + + lzma_next_end(&coder->next, allocator); + lzma_free(coder->dict.buf, allocator); + + if (coder->lz.end != NULL) + coder->lz.end(coder->lz.coder, allocator); + else + lzma_free(coder->lz.coder, allocator); + + lzma_free(coder, allocator); + return; +} + + +extern lzma_ret +lzma_lz_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, + lzma_ret (*lz_init)(lzma_lz_decoder *lz, + const lzma_allocator *allocator, + lzma_vli id, const void *options, + lzma_lz_options *lz_options)) +{ + // Allocate the base structure if it isn't already allocated. + lzma_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &lz_decode; + next->end = &lz_decoder_end; + + coder->dict.buf = NULL; + coder->dict.size = 0; + coder->lz = LZMA_LZ_DECODER_INIT; + coder->next = LZMA_NEXT_CODER_INIT; + } + + // Allocate and initialize the LZ-based decoder. It will also give + // us the dictionary size. + lzma_lz_options lz_options; + return_if_error(lz_init(&coder->lz, allocator, + filters[0].id, filters[0].options, &lz_options)); + + // If the dictionary size is very small, increase it to 4096 bytes. + // This is to prevent constant wrapping of the dictionary, which + // would slow things down. The downside is that since we don't check + // separately for the real dictionary size, we may happily accept + // corrupt files. + if (lz_options.dict_size < 4096) + lz_options.dict_size = 4096; + + // Make dictionary size a multiple of 16. Some LZ-based decoders like + // LZMA use the lowest bits lzma_dict.pos to know the alignment of the + // data. Aligned buffer is also good when memcpying from the + // dictionary to the output buffer, since applications are + // recommended to give aligned buffers to liblzma. + // + // Avoid integer overflow. + if (lz_options.dict_size > SIZE_MAX - 15) + return LZMA_MEM_ERROR; + + lz_options.dict_size = (lz_options.dict_size + 15) & ~((size_t)(15)); + + // Allocate and initialize the dictionary. + if (coder->dict.size != lz_options.dict_size) { + lzma_free(coder->dict.buf, allocator); + coder->dict.buf + = lzma_alloc(lz_options.dict_size, allocator); + if (coder->dict.buf == NULL) + return LZMA_MEM_ERROR; + + coder->dict.size = lz_options.dict_size; + } + + lz_decoder_reset(next->coder); + + // Use the preset dictionary if it was given to us. + if (lz_options.preset_dict != NULL + && lz_options.preset_dict_size > 0) { + // If the preset dictionary is bigger than the actual + // dictionary, copy only the tail. + const size_t copy_size = my_min(lz_options.preset_dict_size, + lz_options.dict_size); + const size_t offset = lz_options.preset_dict_size - copy_size; + memcpy(coder->dict.buf, lz_options.preset_dict + offset, + copy_size); + coder->dict.pos = copy_size; + coder->dict.full = copy_size; + } + + // Miscellaneous initializations + coder->next_finished = false; + coder->this_finished = false; + coder->temp.pos = 0; + coder->temp.size = 0; + + // Initialize the next filter in the chain, if any. + return lzma_next_filter_init(&coder->next, allocator, filters + 1); +} + + +extern uint64_t +lzma_lz_decoder_memusage(size_t dictionary_size) +{ + return sizeof(lzma_coder) + (uint64_t)(dictionary_size); +} diff --git a/src/liblzma/lz/lz_decoder.h b/src/liblzma/lz/lz_decoder.h new file mode 100644 index 0000000..ad80d4d --- /dev/null +++ b/src/liblzma/lz/lz_decoder.h @@ -0,0 +1,234 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lz_decoder.h +/// \brief LZ out window +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZ_DECODER_H +#define LZMA_LZ_DECODER_H + +#include "common.h" + + +typedef struct { + /// Pointer to the dictionary buffer. It can be an allocated buffer + /// internal to liblzma, or it can a be a buffer given by the + /// application when in single-call mode (not implemented yet). + uint8_t *buf; + + /// Write position in dictionary. The next byte will be written to + /// buf[pos]. + size_t pos; + + /// Indicates how full the dictionary is. This is used by + /// dict_is_distance_valid() to detect corrupt files that would + /// read beyond the beginning of the dictionary. + size_t full; + + /// Write limit + size_t limit; + + /// Size of the dictionary + size_t size; + + /// True when dictionary should be reset before decoding more data. + bool need_reset; + +} lzma_dict; + + +typedef struct { + size_t dict_size; + const uint8_t *preset_dict; + size_t preset_dict_size; +} lzma_lz_options; + + +typedef struct { + /// Data specific to the LZ-based decoder + void *coder; + + /// Function to decode from in[] to *dict + lzma_ret (*code)(void *coder, + lzma_dict *restrict dict, const uint8_t *restrict in, + size_t *restrict in_pos, size_t in_size); + + void (*reset)(void *coder, const void *options); + + /// Set the uncompressed size. If uncompressed_size == LZMA_VLI_UNKNOWN + /// then allow_eopm will always be true. + void (*set_uncompressed)(void *coder, lzma_vli uncompressed_size, + bool allow_eopm); + + /// Free allocated resources + void (*end)(void *coder, const lzma_allocator *allocator); + +} lzma_lz_decoder; + + +#define LZMA_LZ_DECODER_INIT \ + (lzma_lz_decoder){ \ + .coder = NULL, \ + .code = NULL, \ + .reset = NULL, \ + .set_uncompressed = NULL, \ + .end = NULL, \ + } + + +extern lzma_ret lzma_lz_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters, + lzma_ret (*lz_init)(lzma_lz_decoder *lz, + const lzma_allocator *allocator, + lzma_vli id, const void *options, + lzma_lz_options *lz_options)); + +extern uint64_t lzma_lz_decoder_memusage(size_t dictionary_size); + + +////////////////////// +// Inline functions // +////////////////////// + +/// Get a byte from the history buffer. +static inline uint8_t +dict_get(const lzma_dict *const dict, const uint32_t distance) +{ + return dict->buf[dict->pos - distance - 1 + + (distance < dict->pos ? 0 : dict->size)]; +} + + +/// Test if dictionary is empty. +static inline bool +dict_is_empty(const lzma_dict *const dict) +{ + return dict->full == 0; +} + + +/// Validate the match distance +static inline bool +dict_is_distance_valid(const lzma_dict *const dict, const size_t distance) +{ + return dict->full > distance; +} + + +/// Repeat *len bytes at distance. +static inline bool +dict_repeat(lzma_dict *dict, uint32_t distance, uint32_t *len) +{ + // Don't write past the end of the dictionary. + const size_t dict_avail = dict->limit - dict->pos; + uint32_t left = my_min(dict_avail, *len); + *len -= left; + + // Repeat a block of data from the history. Because memcpy() is faster + // than copying byte by byte in a loop, the copying process gets split + // into three cases. + if (distance < left) { + // Source and target areas overlap, thus we can't use + // memcpy() nor even memmove() safely. + do { + dict->buf[dict->pos] = dict_get(dict, distance); + ++dict->pos; + } while (--left > 0); + + } else if (distance < dict->pos) { + // The easiest and fastest case + memcpy(dict->buf + dict->pos, + dict->buf + dict->pos - distance - 1, + left); + dict->pos += left; + + } else { + // The bigger the dictionary, the more rare this + // case occurs. We need to "wrap" the dict, thus + // we might need two memcpy() to copy all the data. + assert(dict->full == dict->size); + const uint32_t copy_pos + = dict->pos - distance - 1 + dict->size; + uint32_t copy_size = dict->size - copy_pos; + + if (copy_size < left) { + memmove(dict->buf + dict->pos, dict->buf + copy_pos, + copy_size); + dict->pos += copy_size; + copy_size = left - copy_size; + memcpy(dict->buf + dict->pos, dict->buf, copy_size); + dict->pos += copy_size; + } else { + memmove(dict->buf + dict->pos, dict->buf + copy_pos, + left); + dict->pos += left; + } + } + + // Update how full the dictionary is. + if (dict->full < dict->pos) + dict->full = dict->pos; + + return unlikely(*len != 0); +} + + +/// Puts one byte into the dictionary. Returns true if the dictionary was +/// already full and the byte couldn't be added. +static inline bool +dict_put(lzma_dict *dict, uint8_t byte) +{ + if (unlikely(dict->pos == dict->limit)) + return true; + + dict->buf[dict->pos++] = byte; + + if (dict->pos > dict->full) + dict->full = dict->pos; + + return false; +} + + +/// Copies arbitrary amount of data into the dictionary. +static inline void +dict_write(lzma_dict *restrict dict, const uint8_t *restrict in, + size_t *restrict in_pos, size_t in_size, + size_t *restrict left) +{ + // NOTE: If we are being given more data than the size of the + // dictionary, it could be possible to optimize the LZ decoder + // so that not everything needs to go through the dictionary. + // This shouldn't be very common thing in practice though, and + // the slowdown of one extra memcpy() isn't bad compared to how + // much time it would have taken if the data were compressed. + + if (in_size - *in_pos > *left) + in_size = *in_pos + *left; + + *left -= lzma_bufcpy(in, in_pos, in_size, + dict->buf, &dict->pos, dict->limit); + + if (dict->pos > dict->full) + dict->full = dict->pos; + + return; +} + + +static inline void +dict_reset(lzma_dict *dict) +{ + dict->need_reset = true; + return; +} + +#endif diff --git a/src/liblzma/lz/lz_encoder.c b/src/liblzma/lz/lz_encoder.c new file mode 100644 index 0000000..5489085 --- /dev/null +++ b/src/liblzma/lz/lz_encoder.c @@ -0,0 +1,633 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lz_encoder.c +/// \brief LZ in window +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lz_encoder.h" +#include "lz_encoder_hash.h" + +// See lz_encoder_hash.h. This is a bit hackish but avoids making +// endianness a conditional in makefiles. +#if defined(WORDS_BIGENDIAN) && !defined(HAVE_SMALL) +# include "lz_encoder_hash_table.h" +#endif + +#include "memcmplen.h" + + +typedef struct { + /// LZ-based encoder e.g. LZMA + lzma_lz_encoder lz; + + /// History buffer and match finder + lzma_mf mf; + + /// Next coder in the chain + lzma_next_coder next; +} lzma_coder; + + +/// \brief Moves the data in the input window to free space for new data +/// +/// mf->buffer is a sliding input window, which keeps mf->keep_size_before +/// bytes of input history available all the time. Now and then we need to +/// "slide" the buffer to make space for the new data to the end of the +/// buffer. At the same time, data older than keep_size_before is dropped. +/// +static void +move_window(lzma_mf *mf) +{ + // Align the move to a multiple of 16 bytes. Some LZ-based encoders + // like LZMA use the lowest bits of mf->read_pos to know the + // alignment of the uncompressed data. We also get better speed + // for memmove() with aligned buffers. + assert(mf->read_pos > mf->keep_size_before); + const uint32_t move_offset + = (mf->read_pos - mf->keep_size_before) & ~UINT32_C(15); + + assert(mf->write_pos > move_offset); + const size_t move_size = mf->write_pos - move_offset; + + assert(move_offset + move_size <= mf->size); + + memmove(mf->buffer, mf->buffer + move_offset, move_size); + + mf->offset += move_offset; + mf->read_pos -= move_offset; + mf->read_limit -= move_offset; + mf->write_pos -= move_offset; + + return; +} + + +/// \brief Tries to fill the input window (mf->buffer) +/// +/// If we are the last encoder in the chain, our input data is in in[]. +/// Otherwise we call the next filter in the chain to process in[] and +/// write its output to mf->buffer. +/// +/// This function must not be called once it has returned LZMA_STREAM_END. +/// +static lzma_ret +fill_window(lzma_coder *coder, const lzma_allocator *allocator, + const uint8_t *in, size_t *in_pos, size_t in_size, + lzma_action action) +{ + assert(coder->mf.read_pos <= coder->mf.write_pos); + + // Move the sliding window if needed. + if (coder->mf.read_pos >= coder->mf.size - coder->mf.keep_size_after) + move_window(&coder->mf); + + // Maybe this is ugly, but lzma_mf uses uint32_t for most things + // (which I find cleanest), but we need size_t here when filling + // the history window. + size_t write_pos = coder->mf.write_pos; + lzma_ret ret; + if (coder->next.code == NULL) { + // Not using a filter, simply memcpy() as much as possible. + lzma_bufcpy(in, in_pos, in_size, coder->mf.buffer, + &write_pos, coder->mf.size); + + ret = action != LZMA_RUN && *in_pos == in_size + ? LZMA_STREAM_END : LZMA_OK; + + } else { + ret = coder->next.code(coder->next.coder, allocator, + in, in_pos, in_size, + coder->mf.buffer, &write_pos, + coder->mf.size, action); + } + + coder->mf.write_pos = write_pos; + + // Silence Valgrind. lzma_memcmplen() can read extra bytes + // and Valgrind will give warnings if those bytes are uninitialized + // because Valgrind cannot see that the values of the uninitialized + // bytes are eventually ignored. + memzero(coder->mf.buffer + write_pos, LZMA_MEMCMPLEN_EXTRA); + + // If end of stream has been reached or flushing completed, we allow + // the encoder to process all the input (that is, read_pos is allowed + // to reach write_pos). Otherwise we keep keep_size_after bytes + // available as prebuffer. + if (ret == LZMA_STREAM_END) { + assert(*in_pos == in_size); + ret = LZMA_OK; + coder->mf.action = action; + coder->mf.read_limit = coder->mf.write_pos; + + } else if (coder->mf.write_pos > coder->mf.keep_size_after) { + // This needs to be done conditionally, because if we got + // only little new input, there may be too little input + // to do any encoding yet. + coder->mf.read_limit = coder->mf.write_pos + - coder->mf.keep_size_after; + } + + // Restart the match finder after finished LZMA_SYNC_FLUSH. + if (coder->mf.pending > 0 + && coder->mf.read_pos < coder->mf.read_limit) { + // Match finder may update coder->pending and expects it to + // start from zero, so use a temporary variable. + const uint32_t pending = coder->mf.pending; + coder->mf.pending = 0; + + // Rewind read_pos so that the match finder can hash + // the pending bytes. + assert(coder->mf.read_pos >= pending); + coder->mf.read_pos -= pending; + + // Call the skip function directly instead of using + // mf_skip(), since we don't want to touch mf->read_ahead. + coder->mf.skip(&coder->mf, pending); + } + + return ret; +} + + +static lzma_ret +lz_encode(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size, lzma_action action) +{ + lzma_coder *coder = coder_ptr; + + while (*out_pos < out_size + && (*in_pos < in_size || action != LZMA_RUN)) { + // Read more data to coder->mf.buffer if needed. + if (coder->mf.action == LZMA_RUN && coder->mf.read_pos + >= coder->mf.read_limit) + return_if_error(fill_window(coder, allocator, + in, in_pos, in_size, action)); + + // Encode + const lzma_ret ret = coder->lz.code(coder->lz.coder, + &coder->mf, out, out_pos, out_size); + if (ret != LZMA_OK) { + // Setting this to LZMA_RUN for cases when we are + // flushing. It doesn't matter when finishing or if + // an error occurred. + coder->mf.action = LZMA_RUN; + return ret; + } + } + + return LZMA_OK; +} + + +static bool +lz_encoder_prepare(lzma_mf *mf, const lzma_allocator *allocator, + const lzma_lz_options *lz_options) +{ + // For now, the dictionary size is limited to 1.5 GiB. This may grow + // in the future if needed, but it needs a little more work than just + // changing this check. + if (lz_options->dict_size < LZMA_DICT_SIZE_MIN + || lz_options->dict_size + > (UINT32_C(1) << 30) + (UINT32_C(1) << 29) + || lz_options->nice_len > lz_options->match_len_max) + return true; + + mf->keep_size_before = lz_options->before_size + lz_options->dict_size; + + mf->keep_size_after = lz_options->after_size + + lz_options->match_len_max; + + // To avoid constant memmove()s, allocate some extra space. Since + // memmove()s become more expensive when the size of the buffer + // increases, we reserve more space when a large dictionary is + // used to make the memmove() calls rarer. + // + // This works with dictionaries up to about 3 GiB. If bigger + // dictionary is wanted, some extra work is needed: + // - Several variables in lzma_mf have to be changed from uint32_t + // to size_t. + // - Memory usage calculation needs something too, e.g. use uint64_t + // for mf->size. + uint32_t reserve = lz_options->dict_size / 2; + if (reserve > (UINT32_C(1) << 30)) + reserve /= 2; + + reserve += (lz_options->before_size + lz_options->match_len_max + + lz_options->after_size) / 2 + (UINT32_C(1) << 19); + + const uint32_t old_size = mf->size; + mf->size = mf->keep_size_before + reserve + mf->keep_size_after; + + // Deallocate the old history buffer if it exists but has different + // size than what is needed now. + if (mf->buffer != NULL && old_size != mf->size) { + lzma_free(mf->buffer, allocator); + mf->buffer = NULL; + } + + // Match finder options + mf->match_len_max = lz_options->match_len_max; + mf->nice_len = lz_options->nice_len; + + // cyclic_size has to stay smaller than 2 Gi. Note that this doesn't + // mean limiting dictionary size to less than 2 GiB. With a match + // finder that uses multibyte resolution (hashes start at e.g. every + // fourth byte), cyclic_size would stay below 2 Gi even when + // dictionary size is greater than 2 GiB. + // + // It would be possible to allow cyclic_size >= 2 Gi, but then we + // would need to be careful to use 64-bit types in various places + // (size_t could do since we would need bigger than 32-bit address + // space anyway). It would also require either zeroing a multigigabyte + // buffer at initialization (waste of time and RAM) or allow + // normalization in lz_encoder_mf.c to access uninitialized + // memory to keep the code simpler. The current way is simple and + // still allows pretty big dictionaries, so I don't expect these + // limits to change. + mf->cyclic_size = lz_options->dict_size + 1; + + // Validate the match finder ID and setup the function pointers. + switch (lz_options->match_finder) { +#ifdef HAVE_MF_HC3 + case LZMA_MF_HC3: + mf->find = &lzma_mf_hc3_find; + mf->skip = &lzma_mf_hc3_skip; + break; +#endif +#ifdef HAVE_MF_HC4 + case LZMA_MF_HC4: + mf->find = &lzma_mf_hc4_find; + mf->skip = &lzma_mf_hc4_skip; + break; +#endif +#ifdef HAVE_MF_BT2 + case LZMA_MF_BT2: + mf->find = &lzma_mf_bt2_find; + mf->skip = &lzma_mf_bt2_skip; + break; +#endif +#ifdef HAVE_MF_BT3 + case LZMA_MF_BT3: + mf->find = &lzma_mf_bt3_find; + mf->skip = &lzma_mf_bt3_skip; + break; +#endif +#ifdef HAVE_MF_BT4 + case LZMA_MF_BT4: + mf->find = &lzma_mf_bt4_find; + mf->skip = &lzma_mf_bt4_skip; + break; +#endif + + default: + return true; + } + + // Calculate the sizes of mf->hash and mf->son. + // + // NOTE: Since 5.3.5beta the LZMA encoder ensures that nice_len + // is big enough for the selected match finder. This makes it + // easier for applications as nice_len = 2 will always be accepted + // even though the effective value can be slightly bigger. + const uint32_t hash_bytes + = mf_get_hash_bytes(lz_options->match_finder); + assert(hash_bytes <= mf->nice_len); + + const bool is_bt = (lz_options->match_finder & 0x10) != 0; + uint32_t hs; + + if (hash_bytes == 2) { + hs = 0xFFFF; + } else { + // Round dictionary size up to the next 2^n - 1 so it can + // be used as a hash mask. + hs = lz_options->dict_size - 1; + hs |= hs >> 1; + hs |= hs >> 2; + hs |= hs >> 4; + hs |= hs >> 8; + hs >>= 1; + hs |= 0xFFFF; + + if (hs > (UINT32_C(1) << 24)) { + if (hash_bytes == 3) + hs = (UINT32_C(1) << 24) - 1; + else + hs >>= 1; + } + } + + mf->hash_mask = hs; + + ++hs; + if (hash_bytes > 2) + hs += HASH_2_SIZE; + if (hash_bytes > 3) + hs += HASH_3_SIZE; +/* + No match finder uses this at the moment. + if (mf->hash_bytes > 4) + hs += HASH_4_SIZE; +*/ + + const uint32_t old_hash_count = mf->hash_count; + const uint32_t old_sons_count = mf->sons_count; + mf->hash_count = hs; + mf->sons_count = mf->cyclic_size; + if (is_bt) + mf->sons_count *= 2; + + // Deallocate the old hash array if it exists and has different size + // than what is needed now. + if (old_hash_count != mf->hash_count + || old_sons_count != mf->sons_count) { + lzma_free(mf->hash, allocator); + mf->hash = NULL; + + lzma_free(mf->son, allocator); + mf->son = NULL; + } + + // Maximum number of match finder cycles + mf->depth = lz_options->depth; + if (mf->depth == 0) { + if (is_bt) + mf->depth = 16 + mf->nice_len / 2; + else + mf->depth = 4 + mf->nice_len / 4; + } + + return false; +} + + +static bool +lz_encoder_init(lzma_mf *mf, const lzma_allocator *allocator, + const lzma_lz_options *lz_options) +{ + // Allocate the history buffer. + if (mf->buffer == NULL) { + // lzma_memcmplen() is used for the dictionary buffer + // so we need to allocate a few extra bytes to prevent + // it from reading past the end of the buffer. + mf->buffer = lzma_alloc(mf->size + LZMA_MEMCMPLEN_EXTRA, + allocator); + if (mf->buffer == NULL) + return true; + + // Keep Valgrind happy with lzma_memcmplen() and initialize + // the extra bytes whose value may get read but which will + // effectively get ignored. + memzero(mf->buffer + mf->size, LZMA_MEMCMPLEN_EXTRA); + } + + // Use cyclic_size as initial mf->offset. This allows + // avoiding a few branches in the match finders. The downside is + // that match finder needs to be normalized more often, which may + // hurt performance with huge dictionaries. + mf->offset = mf->cyclic_size; + mf->read_pos = 0; + mf->read_ahead = 0; + mf->read_limit = 0; + mf->write_pos = 0; + mf->pending = 0; + +#if UINT32_MAX >= SIZE_MAX / 4 + // Check for integer overflow. (Huge dictionaries are not + // possible on 32-bit CPU.) + if (mf->hash_count > SIZE_MAX / sizeof(uint32_t) + || mf->sons_count > SIZE_MAX / sizeof(uint32_t)) + return true; +#endif + + // Allocate and initialize the hash table. Since EMPTY_HASH_VALUE + // is zero, we can use lzma_alloc_zero() or memzero() for mf->hash. + // + // We don't need to initialize mf->son, but not doing that may + // make Valgrind complain in normalization (see normalize() in + // lz_encoder_mf.c). Skipping the initialization is *very* good + // when big dictionary is used but only small amount of data gets + // actually compressed: most of the mf->son won't get actually + // allocated by the kernel, so we avoid wasting RAM and improve + // initialization speed a lot. + if (mf->hash == NULL) { + mf->hash = lzma_alloc_zero(mf->hash_count * sizeof(uint32_t), + allocator); + mf->son = lzma_alloc(mf->sons_count * sizeof(uint32_t), + allocator); + + if (mf->hash == NULL || mf->son == NULL) { + lzma_free(mf->hash, allocator); + mf->hash = NULL; + + lzma_free(mf->son, allocator); + mf->son = NULL; + + return true; + } + } else { +/* + for (uint32_t i = 0; i < mf->hash_count; ++i) + mf->hash[i] = EMPTY_HASH_VALUE; +*/ + memzero(mf->hash, mf->hash_count * sizeof(uint32_t)); + } + + mf->cyclic_pos = 0; + + // Handle preset dictionary. + if (lz_options->preset_dict != NULL + && lz_options->preset_dict_size > 0) { + // If the preset dictionary is bigger than the actual + // dictionary, use only the tail. + mf->write_pos = my_min(lz_options->preset_dict_size, mf->size); + memcpy(mf->buffer, lz_options->preset_dict + + lz_options->preset_dict_size - mf->write_pos, + mf->write_pos); + mf->action = LZMA_SYNC_FLUSH; + mf->skip(mf, mf->write_pos); + } + + mf->action = LZMA_RUN; + + return false; +} + + +extern uint64_t +lzma_lz_encoder_memusage(const lzma_lz_options *lz_options) +{ + // Old buffers must not exist when calling lz_encoder_prepare(). + lzma_mf mf = { + .buffer = NULL, + .hash = NULL, + .son = NULL, + .hash_count = 0, + .sons_count = 0, + }; + + // Setup the size information into mf. + if (lz_encoder_prepare(&mf, NULL, lz_options)) + return UINT64_MAX; + + // Calculate the memory usage. + return ((uint64_t)(mf.hash_count) + mf.sons_count) * sizeof(uint32_t) + + mf.size + sizeof(lzma_coder); +} + + +static void +lz_encoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_coder *coder = coder_ptr; + + lzma_next_end(&coder->next, allocator); + + lzma_free(coder->mf.son, allocator); + lzma_free(coder->mf.hash, allocator); + lzma_free(coder->mf.buffer, allocator); + + if (coder->lz.end != NULL) + coder->lz.end(coder->lz.coder, allocator); + else + lzma_free(coder->lz.coder, allocator); + + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +lz_encoder_update(void *coder_ptr, const lzma_allocator *allocator, + const lzma_filter *filters_null lzma_attribute((__unused__)), + const lzma_filter *reversed_filters) +{ + lzma_coder *coder = coder_ptr; + + if (coder->lz.options_update == NULL) + return LZMA_PROG_ERROR; + + return_if_error(coder->lz.options_update( + coder->lz.coder, reversed_filters)); + + return lzma_next_filter_update( + &coder->next, allocator, reversed_filters + 1); +} + + +static lzma_ret +lz_encoder_set_out_limit(void *coder_ptr, uint64_t *uncomp_size, + uint64_t out_limit) +{ + lzma_coder *coder = coder_ptr; + + // This is supported only if there are no other filters chained. + if (coder->next.code == NULL && coder->lz.set_out_limit != NULL) + return coder->lz.set_out_limit( + coder->lz.coder, uncomp_size, out_limit); + + return LZMA_OPTIONS_ERROR; +} + + +extern lzma_ret +lzma_lz_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, + lzma_ret (*lz_init)(lzma_lz_encoder *lz, + const lzma_allocator *allocator, + lzma_vli id, const void *options, + lzma_lz_options *lz_options)) +{ +#if defined(HAVE_SMALL) && !defined(HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR) + // We need that the CRC32 table has been initialized. + lzma_crc32_init(); +#endif + + // Allocate and initialize the base data structure. + lzma_coder *coder = next->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &lz_encode; + next->end = &lz_encoder_end; + next->update = &lz_encoder_update; + next->set_out_limit = &lz_encoder_set_out_limit; + + coder->lz.coder = NULL; + coder->lz.code = NULL; + coder->lz.end = NULL; + + // mf.size is initialized to silence Valgrind + // when used on optimized binaries (GCC may reorder + // code in a way that Valgrind gets unhappy). + coder->mf.buffer = NULL; + coder->mf.size = 0; + coder->mf.hash = NULL; + coder->mf.son = NULL; + coder->mf.hash_count = 0; + coder->mf.sons_count = 0; + + coder->next = LZMA_NEXT_CODER_INIT; + } + + // Initialize the LZ-based encoder. + lzma_lz_options lz_options; + return_if_error(lz_init(&coder->lz, allocator, + filters[0].id, filters[0].options, &lz_options)); + + // Setup the size information into coder->mf and deallocate + // old buffers if they have wrong size. + if (lz_encoder_prepare(&coder->mf, allocator, &lz_options)) + return LZMA_OPTIONS_ERROR; + + // Allocate new buffers if needed, and do the rest of + // the initialization. + if (lz_encoder_init(&coder->mf, allocator, &lz_options)) + return LZMA_MEM_ERROR; + + // Initialize the next filter in the chain, if any. + return lzma_next_filter_init(&coder->next, allocator, filters + 1); +} + + +extern LZMA_API(lzma_bool) +lzma_mf_is_supported(lzma_match_finder mf) +{ + switch (mf) { +#ifdef HAVE_MF_HC3 + case LZMA_MF_HC3: + return true; +#endif +#ifdef HAVE_MF_HC4 + case LZMA_MF_HC4: + return true; +#endif +#ifdef HAVE_MF_BT2 + case LZMA_MF_BT2: + return true; +#endif +#ifdef HAVE_MF_BT3 + case LZMA_MF_BT3: + return true; +#endif +#ifdef HAVE_MF_BT4 + case LZMA_MF_BT4: + return true; +#endif + default: + return false; + } +} diff --git a/src/liblzma/lz/lz_encoder.h b/src/liblzma/lz/lz_encoder.h new file mode 100644 index 0000000..7950a2f --- /dev/null +++ b/src/liblzma/lz/lz_encoder.h @@ -0,0 +1,341 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lz_encoder.h +/// \brief LZ in window and match finder API +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZ_ENCODER_H +#define LZMA_LZ_ENCODER_H + +#include "common.h" + + +/// A table of these is used by the LZ-based encoder to hold +/// the length-distance pairs found by the match finder. +typedef struct { + uint32_t len; + uint32_t dist; +} lzma_match; + + +typedef struct lzma_mf_s lzma_mf; +struct lzma_mf_s { + /////////////// + // In Window // + /////////////// + + /// Pointer to buffer with data to be compressed + uint8_t *buffer; + + /// Total size of the allocated buffer (that is, including all + /// the extra space) + uint32_t size; + + /// Number of bytes that must be kept available in our input history. + /// That is, once keep_size_before bytes have been processed, + /// buffer[read_pos - keep_size_before] is the oldest byte that + /// must be available for reading. + uint32_t keep_size_before; + + /// Number of bytes that must be kept in buffer after read_pos. + /// That is, read_pos <= write_pos - keep_size_after as long as + /// action is LZMA_RUN; when action != LZMA_RUN, read_pos is allowed + /// to reach write_pos so that the last bytes get encoded too. + uint32_t keep_size_after; + + /// Match finders store locations of matches using 32-bit integers. + /// To avoid adjusting several megabytes of integers every time the + /// input window is moved with move_window, we only adjust the + /// offset of the buffer. Thus, buffer[value_in_hash_table - offset] + /// is the byte pointed by value_in_hash_table. + uint32_t offset; + + /// buffer[read_pos] is the next byte to run through the match + /// finder. This is incremented in the match finder once the byte + /// has been processed. + uint32_t read_pos; + + /// Number of bytes that have been ran through the match finder, but + /// which haven't been encoded by the LZ-based encoder yet. + uint32_t read_ahead; + + /// As long as read_pos is less than read_limit, there is enough + /// input available in buffer for at least one encoding loop. + /// + /// Because of the stateful API, read_limit may and will get greater + /// than read_pos quite often. This is taken into account when + /// calculating the value for keep_size_after. + uint32_t read_limit; + + /// buffer[write_pos] is the first byte that doesn't contain valid + /// uncompressed data; that is, the next input byte will be copied + /// to buffer[write_pos]. + uint32_t write_pos; + + /// Number of bytes not hashed before read_pos. This is needed to + /// restart the match finder after LZMA_SYNC_FLUSH. + uint32_t pending; + + ////////////////// + // Match Finder // + ////////////////// + + /// Find matches. Returns the number of distance-length pairs written + /// to the matches array. This is called only via lzma_mf_find(). + uint32_t (*find)(lzma_mf *mf, lzma_match *matches); + + /// Skips num bytes. This is like find() but doesn't make the + /// distance-length pairs available, thus being a little faster. + /// This is called only via mf_skip(). + void (*skip)(lzma_mf *mf, uint32_t num); + + uint32_t *hash; + uint32_t *son; + uint32_t cyclic_pos; + uint32_t cyclic_size; // Must be dictionary size + 1. + uint32_t hash_mask; + + /// Maximum number of loops in the match finder + uint32_t depth; + + /// Maximum length of a match that the match finder will try to find. + uint32_t nice_len; + + /// Maximum length of a match supported by the LZ-based encoder. + /// If the longest match found by the match finder is nice_len, + /// mf_find() tries to expand it up to match_len_max bytes. + uint32_t match_len_max; + + /// When running out of input, binary tree match finders need to know + /// if it is due to flushing or finishing. The action is used also + /// by the LZ-based encoders themselves. + lzma_action action; + + /// Number of elements in hash[] + uint32_t hash_count; + + /// Number of elements in son[] + uint32_t sons_count; +}; + + +typedef struct { + /// Extra amount of data to keep available before the "actual" + /// dictionary. + size_t before_size; + + /// Size of the history buffer + size_t dict_size; + + /// Extra amount of data to keep available after the "actual" + /// dictionary. + size_t after_size; + + /// Maximum length of a match that the LZ-based encoder can accept. + /// This is used to extend matches of length nice_len to the + /// maximum possible length. + size_t match_len_max; + + /// Match finder will search matches up to this length. + /// This must be less than or equal to match_len_max. + size_t nice_len; + + /// Type of the match finder to use + lzma_match_finder match_finder; + + /// Maximum search depth + uint32_t depth; + + /// TODO: Comment + const uint8_t *preset_dict; + + uint32_t preset_dict_size; + +} lzma_lz_options; + + +// The total usable buffer space at any moment outside the match finder: +// before_size + dict_size + after_size + match_len_max +// +// In reality, there's some extra space allocated to prevent the number of +// memmove() calls reasonable. The bigger the dict_size is, the bigger +// this extra buffer will be since with bigger dictionaries memmove() would +// also take longer. +// +// A single encoder loop in the LZ-based encoder may call the match finder +// (mf_find() or mf_skip()) at most after_size times. In other words, +// a single encoder loop may increment lzma_mf.read_pos at most after_size +// times. Since matches are looked up to +// lzma_mf.buffer[lzma_mf.read_pos + match_len_max - 1], the total +// amount of extra buffer needed after dict_size becomes +// after_size + match_len_max. +// +// before_size has two uses. The first one is to keep literals available +// in cases when the LZ-based encoder has made some read ahead. +// TODO: Maybe this could be changed by making the LZ-based encoders to +// store the actual literals as they do with length-distance pairs. +// +// Algorithms such as LZMA2 first try to compress a chunk, and then check +// if the encoded result is smaller than the uncompressed one. If the chunk +// was uncompressible, it is better to store it in uncompressed form in +// the output stream. To do this, the whole uncompressed chunk has to be +// still available in the history buffer. before_size achieves that. + + +typedef struct { + /// Data specific to the LZ-based encoder + void *coder; + + /// Function to encode from *dict to out[] + lzma_ret (*code)(void *coder, + lzma_mf *restrict mf, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size); + + /// Free allocated resources + void (*end)(void *coder, const lzma_allocator *allocator); + + /// Update the options in the middle of the encoding. + lzma_ret (*options_update)(void *coder, const lzma_filter *filter); + + /// Set maximum allowed output size + lzma_ret (*set_out_limit)(void *coder, uint64_t *uncomp_size, + uint64_t out_limit); + +} lzma_lz_encoder; + + +// Basic steps: +// 1. Input gets copied into the dictionary. +// 2. Data in dictionary gets run through the match finder byte by byte. +// 3. The literals and matches are encoded using e.g. LZMA. +// +// The bytes that have been ran through the match finder, but not encoded yet, +// are called `read ahead'. + + +/// Get how many bytes the match finder hashes in its initial step. +/// This is also the minimum nice_len value with the match finder. +static inline uint32_t +mf_get_hash_bytes(lzma_match_finder match_finder) +{ + return (uint32_t)match_finder & 0x0F; +} + + +/// Get pointer to the first byte not ran through the match finder +static inline const uint8_t * +mf_ptr(const lzma_mf *mf) +{ + return mf->buffer + mf->read_pos; +} + + +/// Get the number of bytes that haven't been ran through the match finder yet. +static inline uint32_t +mf_avail(const lzma_mf *mf) +{ + return mf->write_pos - mf->read_pos; +} + + +/// Get the number of bytes that haven't been encoded yet (some of these +/// bytes may have been ran through the match finder though). +static inline uint32_t +mf_unencoded(const lzma_mf *mf) +{ + return mf->write_pos - mf->read_pos + mf->read_ahead; +} + + +/// Calculate the absolute offset from the beginning of the most recent +/// dictionary reset. Only the lowest four bits are important, so there's no +/// problem that we don't know the 64-bit size of the data encoded so far. +/// +/// NOTE: When moving the input window, we need to do it so that the lowest +/// bits of dict->read_pos are not modified to keep this macro working +/// as intended. +static inline uint32_t +mf_position(const lzma_mf *mf) +{ + return mf->read_pos - mf->read_ahead; +} + + +/// Since everything else begins with mf_, use it also for lzma_mf_find(). +#define mf_find lzma_mf_find + + +/// Skip the given number of bytes. This is used when a good match was found. +/// For example, if mf_find() finds a match of 200 bytes long, the first byte +/// of that match was already consumed by mf_find(), and the rest 199 bytes +/// have to be skipped with mf_skip(mf, 199). +static inline void +mf_skip(lzma_mf *mf, uint32_t amount) +{ + if (amount != 0) { + mf->skip(mf, amount); + mf->read_ahead += amount; + } +} + + +/// Copies at most *left number of bytes from the history buffer +/// to out[]. This is needed by LZMA2 to encode uncompressed chunks. +static inline void +mf_read(lzma_mf *mf, uint8_t *out, size_t *out_pos, size_t out_size, + size_t *left) +{ + const size_t out_avail = out_size - *out_pos; + const size_t copy_size = my_min(out_avail, *left); + + assert(mf->read_ahead == 0); + assert(mf->read_pos >= *left); + + memcpy(out + *out_pos, mf->buffer + mf->read_pos - *left, + copy_size); + + *out_pos += copy_size; + *left -= copy_size; + return; +} + + +extern lzma_ret lzma_lz_encoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, + lzma_ret (*lz_init)(lzma_lz_encoder *lz, + const lzma_allocator *allocator, + lzma_vli id, const void *options, + lzma_lz_options *lz_options)); + + +extern uint64_t lzma_lz_encoder_memusage(const lzma_lz_options *lz_options); + + +// These are only for LZ encoder's internal use. +extern uint32_t lzma_mf_find( + lzma_mf *mf, uint32_t *count, lzma_match *matches); + +extern uint32_t lzma_mf_hc3_find(lzma_mf *dict, lzma_match *matches); +extern void lzma_mf_hc3_skip(lzma_mf *dict, uint32_t amount); + +extern uint32_t lzma_mf_hc4_find(lzma_mf *dict, lzma_match *matches); +extern void lzma_mf_hc4_skip(lzma_mf *dict, uint32_t amount); + +extern uint32_t lzma_mf_bt2_find(lzma_mf *dict, lzma_match *matches); +extern void lzma_mf_bt2_skip(lzma_mf *dict, uint32_t amount); + +extern uint32_t lzma_mf_bt3_find(lzma_mf *dict, lzma_match *matches); +extern void lzma_mf_bt3_skip(lzma_mf *dict, uint32_t amount); + +extern uint32_t lzma_mf_bt4_find(lzma_mf *dict, lzma_match *matches); +extern void lzma_mf_bt4_skip(lzma_mf *dict, uint32_t amount); + +#endif diff --git a/src/liblzma/lz/lz_encoder_hash.h b/src/liblzma/lz/lz_encoder_hash.h new file mode 100644 index 0000000..fb15c58 --- /dev/null +++ b/src/liblzma/lz/lz_encoder_hash.h @@ -0,0 +1,108 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lz_encoder_hash.h +/// \brief Hash macros for match finders +// +// Author: Igor Pavlov +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZ_ENCODER_HASH_H +#define LZMA_LZ_ENCODER_HASH_H + +#if defined(WORDS_BIGENDIAN) && !defined(HAVE_SMALL) + // This is to make liblzma produce the same output on big endian + // systems that it does on little endian systems. lz_encoder.c + // takes care of including the actual table. + extern const uint32_t lzma_lz_hash_table[256]; +# define hash_table lzma_lz_hash_table +#else +# include "check.h" +# define hash_table lzma_crc32_table[0] +#endif + +#define HASH_2_SIZE (UINT32_C(1) << 10) +#define HASH_3_SIZE (UINT32_C(1) << 16) +#define HASH_4_SIZE (UINT32_C(1) << 20) + +#define HASH_2_MASK (HASH_2_SIZE - 1) +#define HASH_3_MASK (HASH_3_SIZE - 1) +#define HASH_4_MASK (HASH_4_SIZE - 1) + +#define FIX_3_HASH_SIZE (HASH_2_SIZE) +#define FIX_4_HASH_SIZE (HASH_2_SIZE + HASH_3_SIZE) +#define FIX_5_HASH_SIZE (HASH_2_SIZE + HASH_3_SIZE + HASH_4_SIZE) + +// Endianness doesn't matter in hash_2_calc() (no effect on the output). +#ifdef TUKLIB_FAST_UNALIGNED_ACCESS +# define hash_2_calc() \ + const uint32_t hash_value = read16ne(cur) +#else +# define hash_2_calc() \ + const uint32_t hash_value \ + = (uint32_t)(cur[0]) | ((uint32_t)(cur[1]) << 8) +#endif + +#define hash_3_calc() \ + const uint32_t temp = hash_table[cur[0]] ^ cur[1]; \ + const uint32_t hash_2_value = temp & HASH_2_MASK; \ + const uint32_t hash_value \ + = (temp ^ ((uint32_t)(cur[2]) << 8)) & mf->hash_mask + +#define hash_4_calc() \ + const uint32_t temp = hash_table[cur[0]] ^ cur[1]; \ + const uint32_t hash_2_value = temp & HASH_2_MASK; \ + const uint32_t hash_3_value \ + = (temp ^ ((uint32_t)(cur[2]) << 8)) & HASH_3_MASK; \ + const uint32_t hash_value = (temp ^ ((uint32_t)(cur[2]) << 8) \ + ^ (hash_table[cur[3]] << 5)) & mf->hash_mask + + +// The following are not currently used. + +#define hash_5_calc() \ + const uint32_t temp = hash_table[cur[0]] ^ cur[1]; \ + const uint32_t hash_2_value = temp & HASH_2_MASK; \ + const uint32_t hash_3_value \ + = (temp ^ ((uint32_t)(cur[2]) << 8)) & HASH_3_MASK; \ + uint32_t hash_4_value = (temp ^ ((uint32_t)(cur[2]) << 8) ^ \ + ^ hash_table[cur[3]] << 5); \ + const uint32_t hash_value \ + = (hash_4_value ^ (hash_table[cur[4]] << 3)) \ + & mf->hash_mask; \ + hash_4_value &= HASH_4_MASK + +/* +#define hash_zip_calc() \ + const uint32_t hash_value \ + = (((uint32_t)(cur[0]) | ((uint32_t)(cur[1]) << 8)) \ + ^ hash_table[cur[2]]) & 0xFFFF +*/ + +#define hash_zip_calc() \ + const uint32_t hash_value \ + = (((uint32_t)(cur[2]) | ((uint32_t)(cur[0]) << 8)) \ + ^ hash_table[cur[1]]) & 0xFFFF + +#define mt_hash_2_calc() \ + const uint32_t hash_2_value \ + = (hash_table[cur[0]] ^ cur[1]) & HASH_2_MASK + +#define mt_hash_3_calc() \ + const uint32_t temp = hash_table[cur[0]] ^ cur[1]; \ + const uint32_t hash_2_value = temp & HASH_2_MASK; \ + const uint32_t hash_3_value \ + = (temp ^ ((uint32_t)(cur[2]) << 8)) & HASH_3_MASK + +#define mt_hash_4_calc() \ + const uint32_t temp = hash_table[cur[0]] ^ cur[1]; \ + const uint32_t hash_2_value = temp & HASH_2_MASK; \ + const uint32_t hash_3_value \ + = (temp ^ ((uint32_t)(cur[2]) << 8)) & HASH_3_MASK; \ + const uint32_t hash_4_value = (temp ^ ((uint32_t)(cur[2]) << 8) ^ \ + (hash_table[cur[3]] << 5)) & HASH_4_MASK + +#endif diff --git a/src/liblzma/lz/lz_encoder_hash_table.h b/src/liblzma/lz/lz_encoder_hash_table.h new file mode 100644 index 0000000..8c51717 --- /dev/null +++ b/src/liblzma/lz/lz_encoder_hash_table.h @@ -0,0 +1,68 @@ +/* This file has been automatically generated by crc32_tablegen.c. */ + +const uint32_t lzma_lz_hash_table[256] = { + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D +}; diff --git a/src/liblzma/lz/lz_encoder_mf.c b/src/liblzma/lz/lz_encoder_mf.c new file mode 100644 index 0000000..d03657a --- /dev/null +++ b/src/liblzma/lz/lz_encoder_mf.c @@ -0,0 +1,744 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lz_encoder_mf.c +/// \brief Match finders +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lz_encoder.h" +#include "lz_encoder_hash.h" +#include "memcmplen.h" + + +/// \brief Find matches starting from the current byte +/// +/// \return The length of the longest match found +extern uint32_t +lzma_mf_find(lzma_mf *mf, uint32_t *count_ptr, lzma_match *matches) +{ + // Call the match finder. It returns the number of length-distance + // pairs found. + // FIXME: Minimum count is zero, what _exactly_ is the maximum? + const uint32_t count = mf->find(mf, matches); + + // Length of the longest match; assume that no matches were found + // and thus the maximum length is zero. + uint32_t len_best = 0; + + if (count > 0) { +#ifndef NDEBUG + // Validate the matches. + for (uint32_t i = 0; i < count; ++i) { + assert(matches[i].len <= mf->nice_len); + assert(matches[i].dist < mf->read_pos); + assert(memcmp(mf_ptr(mf) - 1, + mf_ptr(mf) - matches[i].dist - 2, + matches[i].len) == 0); + } +#endif + + // The last used element in the array contains + // the longest match. + len_best = matches[count - 1].len; + + // If a match of maximum search length was found, try to + // extend the match to maximum possible length. + if (len_best == mf->nice_len) { + // The limit for the match length is either the + // maximum match length supported by the LZ-based + // encoder or the number of bytes left in the + // dictionary, whichever is smaller. + uint32_t limit = mf_avail(mf) + 1; + if (limit > mf->match_len_max) + limit = mf->match_len_max; + + // Pointer to the byte we just ran through + // the match finder. + const uint8_t *p1 = mf_ptr(mf) - 1; + + // Pointer to the beginning of the match. We need -1 + // here because the match distances are zero based. + const uint8_t *p2 = p1 - matches[count - 1].dist - 1; + + len_best = lzma_memcmplen(p1, p2, len_best, limit); + } + } + + *count_ptr = count; + + // Finally update the read position to indicate that match finder was + // run for this dictionary offset. + ++mf->read_ahead; + + return len_best; +} + + +/// Hash value to indicate unused element in the hash. Since we start the +/// positions from dict_size + 1, zero is always too far to qualify +/// as usable match position. +#define EMPTY_HASH_VALUE 0 + + +/// Normalization must be done when lzma_mf.offset + lzma_mf.read_pos +/// reaches MUST_NORMALIZE_POS. +#define MUST_NORMALIZE_POS UINT32_MAX + + +/// \brief Normalizes hash values +/// +/// The hash arrays store positions of match candidates. The positions are +/// relative to an arbitrary offset that is not the same as the absolute +/// offset in the input stream. The relative position of the current byte +/// is lzma_mf.offset + lzma_mf.read_pos. The distances of the matches are +/// the differences of the current read position and the position found from +/// the hash. +/// +/// To prevent integer overflows of the offsets stored in the hash arrays, +/// we need to "normalize" the stored values now and then. During the +/// normalization, we drop values that indicate distance greater than the +/// dictionary size, thus making space for new values. +static void +normalize(lzma_mf *mf) +{ + assert(mf->read_pos + mf->offset == MUST_NORMALIZE_POS); + + // In future we may not want to touch the lowest bits, because there + // may be match finders that use larger resolution than one byte. + const uint32_t subvalue + = (MUST_NORMALIZE_POS - mf->cyclic_size); + // & ~((UINT32_C(1) << 10) - 1); + + for (uint32_t i = 0; i < mf->hash_count; ++i) { + // If the distance is greater than the dictionary size, + // we can simply mark the hash element as empty. + if (mf->hash[i] <= subvalue) + mf->hash[i] = EMPTY_HASH_VALUE; + else + mf->hash[i] -= subvalue; + } + + for (uint32_t i = 0; i < mf->sons_count; ++i) { + // Do the same for mf->son. + // + // NOTE: There may be uninitialized elements in mf->son. + // Valgrind may complain that the "if" below depends on + // an uninitialized value. In this case it is safe to ignore + // the warning. See also the comments in lz_encoder_init() + // in lz_encoder.c. + if (mf->son[i] <= subvalue) + mf->son[i] = EMPTY_HASH_VALUE; + else + mf->son[i] -= subvalue; + } + + // Update offset to match the new locations. + mf->offset -= subvalue; + + return; +} + + +/// Mark the current byte as processed from point of view of the match finder. +static void +move_pos(lzma_mf *mf) +{ + if (++mf->cyclic_pos == mf->cyclic_size) + mf->cyclic_pos = 0; + + ++mf->read_pos; + assert(mf->read_pos <= mf->write_pos); + + if (unlikely(mf->read_pos + mf->offset == UINT32_MAX)) + normalize(mf); +} + + +/// When flushing, we cannot run the match finder unless there is nice_len +/// bytes available in the dictionary. Instead, we skip running the match +/// finder (indicating that no match was found), and count how many bytes we +/// have ignored this way. +/// +/// When new data is given after the flushing was completed, the match finder +/// is restarted by rewinding mf->read_pos backwards by mf->pending. Then +/// the missed bytes are added to the hash using the match finder's skip +/// function (with small amount of input, it may start using mf->pending +/// again if flushing). +/// +/// Due to this rewinding, we don't touch cyclic_pos or test for +/// normalization. It will be done when the match finder's skip function +/// catches up after a flush. +static void +move_pending(lzma_mf *mf) +{ + ++mf->read_pos; + assert(mf->read_pos <= mf->write_pos); + ++mf->pending; +} + + +/// Calculate len_limit and determine if there is enough input to run +/// the actual match finder code. Sets up "cur" and "pos". This macro +/// is used by all find functions and binary tree skip functions. Hash +/// chain skip function doesn't need len_limit so a simpler code is used +/// in them. +#define header(is_bt, len_min, ret_op) \ + uint32_t len_limit = mf_avail(mf); \ + if (mf->nice_len <= len_limit) { \ + len_limit = mf->nice_len; \ + } else if (len_limit < (len_min) \ + || (is_bt && mf->action == LZMA_SYNC_FLUSH)) { \ + assert(mf->action != LZMA_RUN); \ + move_pending(mf); \ + ret_op; \ + } \ + const uint8_t *cur = mf_ptr(mf); \ + const uint32_t pos = mf->read_pos + mf->offset + + +/// Header for find functions. "return 0" indicates that zero matches +/// were found. +#define header_find(is_bt, len_min) \ + header(is_bt, len_min, return 0); \ + uint32_t matches_count = 0 + + +/// Header for a loop in a skip function. "continue" tells to skip the rest +/// of the code in the loop. +#define header_skip(is_bt, len_min) \ + header(is_bt, len_min, continue) + + +/// Calls hc_find_func() or bt_find_func() and calculates the total number +/// of matches found. Updates the dictionary position and returns the number +/// of matches found. +#define call_find(func, len_best) \ +do { \ + matches_count = func(len_limit, pos, cur, cur_match, mf->depth, \ + mf->son, mf->cyclic_pos, mf->cyclic_size, \ + matches + matches_count, len_best) \ + - matches; \ + move_pos(mf); \ + return matches_count; \ +} while (0) + + +//////////////// +// Hash Chain // +//////////////// + +#if defined(HAVE_MF_HC3) || defined(HAVE_MF_HC4) +/// +/// +/// \param len_limit Don't look for matches longer than len_limit. +/// \param pos lzma_mf.read_pos + lzma_mf.offset +/// \param cur Pointer to current byte (mf_ptr(mf)) +/// \param cur_match Start position of the current match candidate +/// \param depth Maximum length of the hash chain +/// \param son lzma_mf.son (contains the hash chain) +/// \param cyclic_pos +/// \param cyclic_size +/// \param matches Array to hold the matches. +/// \param len_best The length of the longest match found so far. +static lzma_match * +hc_find_func( + const uint32_t len_limit, + const uint32_t pos, + const uint8_t *const cur, + uint32_t cur_match, + uint32_t depth, + uint32_t *const son, + const uint32_t cyclic_pos, + const uint32_t cyclic_size, + lzma_match *matches, + uint32_t len_best) +{ + son[cyclic_pos] = cur_match; + + while (true) { + const uint32_t delta = pos - cur_match; + if (depth-- == 0 || delta >= cyclic_size) + return matches; + + const uint8_t *const pb = cur - delta; + cur_match = son[cyclic_pos - delta + + (delta > cyclic_pos ? cyclic_size : 0)]; + + if (pb[len_best] == cur[len_best] && pb[0] == cur[0]) { + uint32_t len = lzma_memcmplen(pb, cur, 1, len_limit); + + if (len_best < len) { + len_best = len; + matches->len = len; + matches->dist = delta - 1; + ++matches; + + if (len == len_limit) + return matches; + } + } + } +} + + +#define hc_find(len_best) \ + call_find(hc_find_func, len_best) + + +#define hc_skip() \ +do { \ + mf->son[mf->cyclic_pos] = cur_match; \ + move_pos(mf); \ +} while (0) + +#endif + + +#ifdef HAVE_MF_HC3 +extern uint32_t +lzma_mf_hc3_find(lzma_mf *mf, lzma_match *matches) +{ + header_find(false, 3); + + hash_3_calc(); + + const uint32_t delta2 = pos - mf->hash[hash_2_value]; + const uint32_t cur_match = mf->hash[FIX_3_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_value] = pos; + + uint32_t len_best = 2; + + if (delta2 < mf->cyclic_size && *(cur - delta2) == *cur) { + len_best = lzma_memcmplen(cur - delta2, cur, + len_best, len_limit); + + matches[0].len = len_best; + matches[0].dist = delta2 - 1; + matches_count = 1; + + if (len_best == len_limit) { + hc_skip(); + return 1; // matches_count + } + } + + hc_find(len_best); +} + + +extern void +lzma_mf_hc3_skip(lzma_mf *mf, uint32_t amount) +{ + do { + if (mf_avail(mf) < 3) { + move_pending(mf); + continue; + } + + const uint8_t *cur = mf_ptr(mf); + const uint32_t pos = mf->read_pos + mf->offset; + + hash_3_calc(); + + const uint32_t cur_match + = mf->hash[FIX_3_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_value] = pos; + + hc_skip(); + + } while (--amount != 0); +} +#endif + + +#ifdef HAVE_MF_HC4 +extern uint32_t +lzma_mf_hc4_find(lzma_mf *mf, lzma_match *matches) +{ + header_find(false, 4); + + hash_4_calc(); + + uint32_t delta2 = pos - mf->hash[hash_2_value]; + const uint32_t delta3 + = pos - mf->hash[FIX_3_HASH_SIZE + hash_3_value]; + const uint32_t cur_match = mf->hash[FIX_4_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value ] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_3_value] = pos; + mf->hash[FIX_4_HASH_SIZE + hash_value] = pos; + + uint32_t len_best = 1; + + if (delta2 < mf->cyclic_size && *(cur - delta2) == *cur) { + len_best = 2; + matches[0].len = 2; + matches[0].dist = delta2 - 1; + matches_count = 1; + } + + if (delta2 != delta3 && delta3 < mf->cyclic_size + && *(cur - delta3) == *cur) { + len_best = 3; + matches[matches_count++].dist = delta3 - 1; + delta2 = delta3; + } + + if (matches_count != 0) { + len_best = lzma_memcmplen(cur - delta2, cur, + len_best, len_limit); + + matches[matches_count - 1].len = len_best; + + if (len_best == len_limit) { + hc_skip(); + return matches_count; + } + } + + if (len_best < 3) + len_best = 3; + + hc_find(len_best); +} + + +extern void +lzma_mf_hc4_skip(lzma_mf *mf, uint32_t amount) +{ + do { + if (mf_avail(mf) < 4) { + move_pending(mf); + continue; + } + + const uint8_t *cur = mf_ptr(mf); + const uint32_t pos = mf->read_pos + mf->offset; + + hash_4_calc(); + + const uint32_t cur_match + = mf->hash[FIX_4_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_3_value] = pos; + mf->hash[FIX_4_HASH_SIZE + hash_value] = pos; + + hc_skip(); + + } while (--amount != 0); +} +#endif + + +///////////////// +// Binary Tree // +///////////////// + +#if defined(HAVE_MF_BT2) || defined(HAVE_MF_BT3) || defined(HAVE_MF_BT4) +static lzma_match * +bt_find_func( + const uint32_t len_limit, + const uint32_t pos, + const uint8_t *const cur, + uint32_t cur_match, + uint32_t depth, + uint32_t *const son, + const uint32_t cyclic_pos, + const uint32_t cyclic_size, + lzma_match *matches, + uint32_t len_best) +{ + uint32_t *ptr0 = son + (cyclic_pos << 1) + 1; + uint32_t *ptr1 = son + (cyclic_pos << 1); + + uint32_t len0 = 0; + uint32_t len1 = 0; + + while (true) { + const uint32_t delta = pos - cur_match; + if (depth-- == 0 || delta >= cyclic_size) { + *ptr0 = EMPTY_HASH_VALUE; + *ptr1 = EMPTY_HASH_VALUE; + return matches; + } + + uint32_t *const pair = son + ((cyclic_pos - delta + + (delta > cyclic_pos ? cyclic_size : 0)) + << 1); + + const uint8_t *const pb = cur - delta; + uint32_t len = my_min(len0, len1); + + if (pb[len] == cur[len]) { + len = lzma_memcmplen(pb, cur, len + 1, len_limit); + + if (len_best < len) { + len_best = len; + matches->len = len; + matches->dist = delta - 1; + ++matches; + + if (len == len_limit) { + *ptr1 = pair[0]; + *ptr0 = pair[1]; + return matches; + } + } + } + + if (pb[len] < cur[len]) { + *ptr1 = cur_match; + ptr1 = pair + 1; + cur_match = *ptr1; + len1 = len; + } else { + *ptr0 = cur_match; + ptr0 = pair; + cur_match = *ptr0; + len0 = len; + } + } +} + + +static void +bt_skip_func( + const uint32_t len_limit, + const uint32_t pos, + const uint8_t *const cur, + uint32_t cur_match, + uint32_t depth, + uint32_t *const son, + const uint32_t cyclic_pos, + const uint32_t cyclic_size) +{ + uint32_t *ptr0 = son + (cyclic_pos << 1) + 1; + uint32_t *ptr1 = son + (cyclic_pos << 1); + + uint32_t len0 = 0; + uint32_t len1 = 0; + + while (true) { + const uint32_t delta = pos - cur_match; + if (depth-- == 0 || delta >= cyclic_size) { + *ptr0 = EMPTY_HASH_VALUE; + *ptr1 = EMPTY_HASH_VALUE; + return; + } + + uint32_t *pair = son + ((cyclic_pos - delta + + (delta > cyclic_pos ? cyclic_size : 0)) + << 1); + const uint8_t *pb = cur - delta; + uint32_t len = my_min(len0, len1); + + if (pb[len] == cur[len]) { + len = lzma_memcmplen(pb, cur, len + 1, len_limit); + + if (len == len_limit) { + *ptr1 = pair[0]; + *ptr0 = pair[1]; + return; + } + } + + if (pb[len] < cur[len]) { + *ptr1 = cur_match; + ptr1 = pair + 1; + cur_match = *ptr1; + len1 = len; + } else { + *ptr0 = cur_match; + ptr0 = pair; + cur_match = *ptr0; + len0 = len; + } + } +} + + +#define bt_find(len_best) \ + call_find(bt_find_func, len_best) + +#define bt_skip() \ +do { \ + bt_skip_func(len_limit, pos, cur, cur_match, mf->depth, \ + mf->son, mf->cyclic_pos, \ + mf->cyclic_size); \ + move_pos(mf); \ +} while (0) + +#endif + + +#ifdef HAVE_MF_BT2 +extern uint32_t +lzma_mf_bt2_find(lzma_mf *mf, lzma_match *matches) +{ + header_find(true, 2); + + hash_2_calc(); + + const uint32_t cur_match = mf->hash[hash_value]; + mf->hash[hash_value] = pos; + + bt_find(1); +} + + +extern void +lzma_mf_bt2_skip(lzma_mf *mf, uint32_t amount) +{ + do { + header_skip(true, 2); + + hash_2_calc(); + + const uint32_t cur_match = mf->hash[hash_value]; + mf->hash[hash_value] = pos; + + bt_skip(); + + } while (--amount != 0); +} +#endif + + +#ifdef HAVE_MF_BT3 +extern uint32_t +lzma_mf_bt3_find(lzma_mf *mf, lzma_match *matches) +{ + header_find(true, 3); + + hash_3_calc(); + + const uint32_t delta2 = pos - mf->hash[hash_2_value]; + const uint32_t cur_match = mf->hash[FIX_3_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_value] = pos; + + uint32_t len_best = 2; + + if (delta2 < mf->cyclic_size && *(cur - delta2) == *cur) { + len_best = lzma_memcmplen( + cur, cur - delta2, len_best, len_limit); + + matches[0].len = len_best; + matches[0].dist = delta2 - 1; + matches_count = 1; + + if (len_best == len_limit) { + bt_skip(); + return 1; // matches_count + } + } + + bt_find(len_best); +} + + +extern void +lzma_mf_bt3_skip(lzma_mf *mf, uint32_t amount) +{ + do { + header_skip(true, 3); + + hash_3_calc(); + + const uint32_t cur_match + = mf->hash[FIX_3_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_value] = pos; + + bt_skip(); + + } while (--amount != 0); +} +#endif + + +#ifdef HAVE_MF_BT4 +extern uint32_t +lzma_mf_bt4_find(lzma_mf *mf, lzma_match *matches) +{ + header_find(true, 4); + + hash_4_calc(); + + uint32_t delta2 = pos - mf->hash[hash_2_value]; + const uint32_t delta3 + = pos - mf->hash[FIX_3_HASH_SIZE + hash_3_value]; + const uint32_t cur_match = mf->hash[FIX_4_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_3_value] = pos; + mf->hash[FIX_4_HASH_SIZE + hash_value] = pos; + + uint32_t len_best = 1; + + if (delta2 < mf->cyclic_size && *(cur - delta2) == *cur) { + len_best = 2; + matches[0].len = 2; + matches[0].dist = delta2 - 1; + matches_count = 1; + } + + if (delta2 != delta3 && delta3 < mf->cyclic_size + && *(cur - delta3) == *cur) { + len_best = 3; + matches[matches_count++].dist = delta3 - 1; + delta2 = delta3; + } + + if (matches_count != 0) { + len_best = lzma_memcmplen( + cur, cur - delta2, len_best, len_limit); + + matches[matches_count - 1].len = len_best; + + if (len_best == len_limit) { + bt_skip(); + return matches_count; + } + } + + if (len_best < 3) + len_best = 3; + + bt_find(len_best); +} + + +extern void +lzma_mf_bt4_skip(lzma_mf *mf, uint32_t amount) +{ + do { + header_skip(true, 4); + + hash_4_calc(); + + const uint32_t cur_match + = mf->hash[FIX_4_HASH_SIZE + hash_value]; + + mf->hash[hash_2_value] = pos; + mf->hash[FIX_3_HASH_SIZE + hash_3_value] = pos; + mf->hash[FIX_4_HASH_SIZE + hash_value] = pos; + + bt_skip(); + + } while (--amount != 0); +} +#endif diff --git a/src/liblzma/lzma/Makefile.inc b/src/liblzma/lzma/Makefile.inc new file mode 100644 index 0000000..506b328 --- /dev/null +++ b/src/liblzma/lzma/Makefile.inc @@ -0,0 +1,47 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +EXTRA_DIST += lzma/fastpos_tablegen.c + +liblzma_la_SOURCES += lzma/lzma_common.h + +if COND_FILTER_LZMA1 +liblzma_la_SOURCES += \ + lzma/lzma_encoder_presets.c +endif + +if COND_ENCODER_LZMA1 +liblzma_la_SOURCES += \ + lzma/fastpos.h \ + lzma/lzma_encoder.h \ + lzma/lzma_encoder.c \ + lzma/lzma_encoder_private.h \ + lzma/lzma_encoder_optimum_fast.c \ + lzma/lzma_encoder_optimum_normal.c + +if !COND_SMALL +liblzma_la_SOURCES += lzma/fastpos_table.c +endif +endif + +if COND_DECODER_LZMA1 +liblzma_la_SOURCES += \ + lzma/lzma_decoder.c \ + lzma/lzma_decoder.h +endif + +if COND_ENCODER_LZMA2 +liblzma_la_SOURCES += \ + lzma/lzma2_encoder.c \ + lzma/lzma2_encoder.h +endif + +if COND_DECODER_LZMA2 +liblzma_la_SOURCES += \ + lzma/lzma2_decoder.c \ + lzma/lzma2_decoder.h +endif diff --git a/src/liblzma/lzma/fastpos.h b/src/liblzma/lzma/fastpos.h new file mode 100644 index 0000000..cba442c --- /dev/null +++ b/src/liblzma/lzma/fastpos.h @@ -0,0 +1,141 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file fastpos.h +/// \brief Kind of two-bit version of bit scan reverse +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_FASTPOS_H +#define LZMA_FASTPOS_H + +// LZMA encodes match distances by storing the highest two bits using +// a six-bit value [0, 63], and then the missing lower bits. +// Dictionary size is also stored using this encoding in the .xz +// file format header. +// +// fastpos.h provides a way to quickly find out the correct six-bit +// values. The following table gives some examples of this encoding: +// +// dist return +// 0 0 +// 1 1 +// 2 2 +// 3 3 +// 4 4 +// 5 4 +// 6 5 +// 7 5 +// 8 6 +// 11 6 +// 12 7 +// ... ... +// 15 7 +// 16 8 +// 17 8 +// ... ... +// 23 8 +// 24 9 +// 25 9 +// ... ... +// +// +// Provided functions or macros +// ---------------------------- +// +// get_dist_slot(dist) is the basic version. get_dist_slot_2(dist) +// assumes that dist >= FULL_DISTANCES, thus the result is at least +// FULL_DISTANCES_BITS * 2. Using get_dist_slot(dist) instead of +// get_dist_slot_2(dist) would give the same result, but get_dist_slot_2(dist) +// should be tiny bit faster due to the assumption being made. +// +// +// Size vs. speed +// -------------- +// +// With some CPUs that have fast BSR (bit scan reverse) instruction, the +// size optimized version is slightly faster than the bigger table based +// approach. Such CPUs include Intel Pentium Pro, Pentium II, Pentium III +// and Core 2 (possibly others). AMD K7 seems to have slower BSR, but that +// would still have speed roughly comparable to the table version. Older +// x86 CPUs like the original Pentium have very slow BSR; on those systems +// the table version is a lot faster. +// +// On some CPUs, the table version is a lot faster when using position +// dependent code, but with position independent code the size optimized +// version is slightly faster. This occurs at least on 32-bit SPARC (no +// ASM optimizations). +// +// I'm making the table version the default, because that has good speed +// on all systems I have tried. The size optimized version is sometimes +// slightly faster, but sometimes it is a lot slower. + +#ifdef HAVE_SMALL +# define get_dist_slot(dist) \ + ((dist) <= 4 ? (dist) : get_dist_slot_2(dist)) + +static inline uint32_t +get_dist_slot_2(uint32_t dist) +{ + const uint32_t i = bsr32(dist); + return (i + i) + ((dist >> (i - 1)) & 1); +} + + +#else + +#define FASTPOS_BITS 13 + +extern const uint8_t lzma_fastpos[1 << FASTPOS_BITS]; + + +#define fastpos_shift(extra, n) \ + ((extra) + (n) * (FASTPOS_BITS - 1)) + +#define fastpos_limit(extra, n) \ + (UINT32_C(1) << (FASTPOS_BITS + fastpos_shift(extra, n))) + +#define fastpos_result(dist, extra, n) \ + (uint32_t)(lzma_fastpos[(dist) >> fastpos_shift(extra, n)]) \ + + 2 * fastpos_shift(extra, n) + + +static inline uint32_t +get_dist_slot(uint32_t dist) +{ + // If it is small enough, we can pick the result directly from + // the precalculated table. + if (dist < fastpos_limit(0, 0)) + return lzma_fastpos[dist]; + + if (dist < fastpos_limit(0, 1)) + return fastpos_result(dist, 0, 1); + + return fastpos_result(dist, 0, 2); +} + + +#ifdef FULL_DISTANCES_BITS +static inline uint32_t +get_dist_slot_2(uint32_t dist) +{ + assert(dist >= FULL_DISTANCES); + + if (dist < fastpos_limit(FULL_DISTANCES_BITS - 1, 0)) + return fastpos_result(dist, FULL_DISTANCES_BITS - 1, 0); + + if (dist < fastpos_limit(FULL_DISTANCES_BITS - 1, 1)) + return fastpos_result(dist, FULL_DISTANCES_BITS - 1, 1); + + return fastpos_result(dist, FULL_DISTANCES_BITS - 1, 2); +} +#endif + +#endif + +#endif diff --git a/src/liblzma/lzma/fastpos_table.c b/src/liblzma/lzma/fastpos_table.c new file mode 100644 index 0000000..6a3ceac --- /dev/null +++ b/src/liblzma/lzma/fastpos_table.c @@ -0,0 +1,519 @@ +/* This file has been automatically generated by fastpos_tablegen.c. */ + +#include "common.h" +#include "fastpos.h" + +const uint8_t lzma_fastpos[1 << FASTPOS_BITS] = { + 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, + 8, 8, 8, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, + 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, + 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, + 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, + 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, + 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, + 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, + 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25 +}; diff --git a/src/liblzma/lzma/fastpos_tablegen.c b/src/liblzma/lzma/fastpos_tablegen.c new file mode 100644 index 0000000..d4484c8 --- /dev/null +++ b/src/liblzma/lzma/fastpos_tablegen.c @@ -0,0 +1,55 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file fastpos_tablegen.c +/// \brief Generates the lzma_fastpos[] lookup table +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include +#include +#include "fastpos.h" + + +int +main(void) +{ + uint8_t fastpos[1 << FASTPOS_BITS]; + + const uint8_t fast_slots = 2 * FASTPOS_BITS; + uint32_t c = 2; + + fastpos[0] = 0; + fastpos[1] = 1; + + for (uint8_t slot_fast = 2; slot_fast < fast_slots; ++slot_fast) { + const uint32_t k = 1 << ((slot_fast >> 1) - 1); + for (uint32_t j = 0; j < k; ++j, ++c) + fastpos[c] = slot_fast; + } + + printf("/* This file has been automatically generated " + "by fastpos_tablegen.c. */\n\n" + "#include \"common.h\"\n" + "#include \"fastpos.h\"\n\n" + "const uint8_t lzma_fastpos[1 << FASTPOS_BITS] = {"); + + for (size_t i = 0; i < (1 << FASTPOS_BITS); ++i) { + if (i % 16 == 0) + printf("\n\t"); + + printf("%3u", (unsigned int)(fastpos[i])); + + if (i != (1 << FASTPOS_BITS) - 1) + printf(","); + } + + printf("\n};\n"); + + return 0; +} diff --git a/src/liblzma/lzma/lzma2_decoder.c b/src/liblzma/lzma/lzma2_decoder.c new file mode 100644 index 0000000..567df49 --- /dev/null +++ b/src/liblzma/lzma/lzma2_decoder.c @@ -0,0 +1,311 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma2_decoder.c +/// \brief LZMA2 decoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lzma2_decoder.h" +#include "lz_decoder.h" +#include "lzma_decoder.h" + + +typedef struct { + enum sequence { + SEQ_CONTROL, + SEQ_UNCOMPRESSED_1, + SEQ_UNCOMPRESSED_2, + SEQ_COMPRESSED_0, + SEQ_COMPRESSED_1, + SEQ_PROPERTIES, + SEQ_LZMA, + SEQ_COPY, + } sequence; + + /// Sequence after the size fields have been decoded. + enum sequence next_sequence; + + /// LZMA decoder + lzma_lz_decoder lzma; + + /// Uncompressed size of LZMA chunk + size_t uncompressed_size; + + /// Compressed size of the chunk (naturally equals to uncompressed + /// size of uncompressed chunk) + size_t compressed_size; + + /// True if properties are needed. This is false before the + /// first LZMA chunk. + bool need_properties; + + /// True if dictionary reset is needed. This is false before the + /// first chunk (LZMA or uncompressed). + bool need_dictionary_reset; + + lzma_options_lzma options; +} lzma_lzma2_coder; + + +static lzma_ret +lzma2_decode(void *coder_ptr, lzma_dict *restrict dict, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size) +{ + lzma_lzma2_coder *restrict coder = coder_ptr; + + // With SEQ_LZMA it is possible that no new input is needed to do + // some progress. The rest of the sequences assume that there is + // at least one byte of input. + while (*in_pos < in_size || coder->sequence == SEQ_LZMA) + switch (coder->sequence) { + case SEQ_CONTROL: { + const uint32_t control = in[*in_pos]; + ++*in_pos; + + // End marker + if (control == 0x00) + return LZMA_STREAM_END; + + if (control >= 0xE0 || control == 1) { + // Dictionary reset implies that next LZMA chunk has + // to set new properties. + coder->need_properties = true; + coder->need_dictionary_reset = true; + } else if (coder->need_dictionary_reset) { + return LZMA_DATA_ERROR; + } + + if (control >= 0x80) { + // LZMA chunk. The highest five bits of the + // uncompressed size are taken from the control byte. + coder->uncompressed_size = (control & 0x1F) << 16; + coder->sequence = SEQ_UNCOMPRESSED_1; + + // See if there are new properties or if we need to + // reset the state. + if (control >= 0xC0) { + // When there are new properties, state reset + // is done at SEQ_PROPERTIES. + coder->need_properties = false; + coder->next_sequence = SEQ_PROPERTIES; + + } else if (coder->need_properties) { + return LZMA_DATA_ERROR; + + } else { + coder->next_sequence = SEQ_LZMA; + + // If only state reset is wanted with old + // properties, do the resetting here for + // simplicity. + if (control >= 0xA0) + coder->lzma.reset(coder->lzma.coder, + &coder->options); + } + } else { + // Invalid control values + if (control > 2) + return LZMA_DATA_ERROR; + + // It's uncompressed chunk + coder->sequence = SEQ_COMPRESSED_0; + coder->next_sequence = SEQ_COPY; + } + + if (coder->need_dictionary_reset) { + // Finish the dictionary reset and let the caller + // flush the dictionary to the actual output buffer. + coder->need_dictionary_reset = false; + dict_reset(dict); + return LZMA_OK; + } + + break; + } + + case SEQ_UNCOMPRESSED_1: + coder->uncompressed_size += (uint32_t)(in[(*in_pos)++]) << 8; + coder->sequence = SEQ_UNCOMPRESSED_2; + break; + + case SEQ_UNCOMPRESSED_2: + coder->uncompressed_size += in[(*in_pos)++] + 1U; + coder->sequence = SEQ_COMPRESSED_0; + coder->lzma.set_uncompressed(coder->lzma.coder, + coder->uncompressed_size, false); + break; + + case SEQ_COMPRESSED_0: + coder->compressed_size = (uint32_t)(in[(*in_pos)++]) << 8; + coder->sequence = SEQ_COMPRESSED_1; + break; + + case SEQ_COMPRESSED_1: + coder->compressed_size += in[(*in_pos)++] + 1U; + coder->sequence = coder->next_sequence; + break; + + case SEQ_PROPERTIES: + if (lzma_lzma_lclppb_decode(&coder->options, in[(*in_pos)++])) + return LZMA_DATA_ERROR; + + coder->lzma.reset(coder->lzma.coder, &coder->options); + + coder->sequence = SEQ_LZMA; + break; + + case SEQ_LZMA: { + // Store the start offset so that we can update + // coder->compressed_size later. + const size_t in_start = *in_pos; + + // Decode from in[] to *dict. + const lzma_ret ret = coder->lzma.code(coder->lzma.coder, + dict, in, in_pos, in_size); + + // Validate and update coder->compressed_size. + const size_t in_used = *in_pos - in_start; + if (in_used > coder->compressed_size) + return LZMA_DATA_ERROR; + + coder->compressed_size -= in_used; + + // Return if we didn't finish the chunk, or an error occurred. + if (ret != LZMA_STREAM_END) + return ret; + + // The LZMA decoder must have consumed the whole chunk now. + // We don't need to worry about uncompressed size since it + // is checked by the LZMA decoder. + if (coder->compressed_size != 0) + return LZMA_DATA_ERROR; + + coder->sequence = SEQ_CONTROL; + break; + } + + case SEQ_COPY: { + // Copy from input to the dictionary as is. + dict_write(dict, in, in_pos, in_size, &coder->compressed_size); + if (coder->compressed_size != 0) + return LZMA_OK; + + coder->sequence = SEQ_CONTROL; + break; + } + + default: + assert(0); + return LZMA_PROG_ERROR; + } + + return LZMA_OK; +} + + +static void +lzma2_decoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_lzma2_coder *coder = coder_ptr; + + assert(coder->lzma.end == NULL); + lzma_free(coder->lzma.coder, allocator); + + lzma_free(coder, allocator); + + return; +} + + +static lzma_ret +lzma2_decoder_init(lzma_lz_decoder *lz, const lzma_allocator *allocator, + lzma_vli id lzma_attribute((__unused__)), const void *opt, + lzma_lz_options *lz_options) +{ + lzma_lzma2_coder *coder = lz->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_lzma2_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + lz->coder = coder; + lz->code = &lzma2_decode; + lz->end = &lzma2_decoder_end; + + coder->lzma = LZMA_LZ_DECODER_INIT; + } + + const lzma_options_lzma *options = opt; + + coder->sequence = SEQ_CONTROL; + coder->need_properties = true; + coder->need_dictionary_reset = options->preset_dict == NULL + || options->preset_dict_size == 0; + + return lzma_lzma_decoder_create(&coder->lzma, + allocator, options, lz_options); +} + + +extern lzma_ret +lzma_lzma2_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + // LZMA2 can only be the last filter in the chain. This is enforced + // by the raw_decoder initialization. + assert(filters[1].init == NULL); + + return lzma_lz_decoder_init(next, allocator, filters, + &lzma2_decoder_init); +} + + +extern uint64_t +lzma_lzma2_decoder_memusage(const void *options) +{ + return sizeof(lzma_lzma2_coder) + + lzma_lzma_decoder_memusage_nocheck(options); +} + + +extern lzma_ret +lzma_lzma2_props_decode(void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size) +{ + if (props_size != 1) + return LZMA_OPTIONS_ERROR; + + // Check that reserved bits are unset. + if (props[0] & 0xC0) + return LZMA_OPTIONS_ERROR; + + // Decode the dictionary size. + if (props[0] > 40) + return LZMA_OPTIONS_ERROR; + + lzma_options_lzma *opt = lzma_alloc( + sizeof(lzma_options_lzma), allocator); + if (opt == NULL) + return LZMA_MEM_ERROR; + + if (props[0] == 40) { + opt->dict_size = UINT32_MAX; + } else { + opt->dict_size = 2 | (props[0] & 1U); + opt->dict_size <<= props[0] / 2U + 11; + } + + opt->preset_dict = NULL; + opt->preset_dict_size = 0; + + *options = opt; + + return LZMA_OK; +} diff --git a/src/liblzma/lzma/lzma2_decoder.h b/src/liblzma/lzma/lzma2_decoder.h new file mode 100644 index 0000000..ef2dcbf --- /dev/null +++ b/src/liblzma/lzma/lzma2_decoder.h @@ -0,0 +1,29 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma2_decoder.h +/// \brief LZMA2 decoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZMA2_DECODER_H +#define LZMA_LZMA2_DECODER_H + +#include "common.h" + +extern lzma_ret lzma_lzma2_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern uint64_t lzma_lzma2_decoder_memusage(const void *options); + +extern lzma_ret lzma_lzma2_props_decode( + void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size); + +#endif diff --git a/src/liblzma/lzma/lzma2_encoder.c b/src/liblzma/lzma/lzma2_encoder.c new file mode 100644 index 0000000..4b6b231 --- /dev/null +++ b/src/liblzma/lzma/lzma2_encoder.c @@ -0,0 +1,414 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma2_encoder.c +/// \brief LZMA2 encoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lz_encoder.h" +#include "lzma_encoder.h" +#include "fastpos.h" +#include "lzma2_encoder.h" + + +typedef struct { + enum { + SEQ_INIT, + SEQ_LZMA_ENCODE, + SEQ_LZMA_COPY, + SEQ_UNCOMPRESSED_HEADER, + SEQ_UNCOMPRESSED_COPY, + } sequence; + + /// LZMA encoder + void *lzma; + + /// LZMA options currently in use. + lzma_options_lzma opt_cur; + + bool need_properties; + bool need_state_reset; + bool need_dictionary_reset; + + /// Uncompressed size of a chunk + size_t uncompressed_size; + + /// Compressed size of a chunk (excluding headers); this is also used + /// to indicate the end of buf[] in SEQ_LZMA_COPY. + size_t compressed_size; + + /// Read position in buf[] + size_t buf_pos; + + /// Buffer to hold the chunk header and LZMA compressed data + uint8_t buf[LZMA2_HEADER_MAX + LZMA2_CHUNK_MAX]; +} lzma_lzma2_coder; + + +static void +lzma2_header_lzma(lzma_lzma2_coder *coder) +{ + assert(coder->uncompressed_size > 0); + assert(coder->uncompressed_size <= LZMA2_UNCOMPRESSED_MAX); + assert(coder->compressed_size > 0); + assert(coder->compressed_size <= LZMA2_CHUNK_MAX); + + size_t pos; + + if (coder->need_properties) { + pos = 0; + + if (coder->need_dictionary_reset) + coder->buf[pos] = 0x80 + (3 << 5); + else + coder->buf[pos] = 0x80 + (2 << 5); + } else { + pos = 1; + + if (coder->need_state_reset) + coder->buf[pos] = 0x80 + (1 << 5); + else + coder->buf[pos] = 0x80; + } + + // Set the start position for copying. + coder->buf_pos = pos; + + // Uncompressed size + size_t size = coder->uncompressed_size - 1; + coder->buf[pos++] += size >> 16; + coder->buf[pos++] = (size >> 8) & 0xFF; + coder->buf[pos++] = size & 0xFF; + + // Compressed size + size = coder->compressed_size - 1; + coder->buf[pos++] = size >> 8; + coder->buf[pos++] = size & 0xFF; + + // Properties, if needed + if (coder->need_properties) + lzma_lzma_lclppb_encode(&coder->opt_cur, coder->buf + pos); + + coder->need_properties = false; + coder->need_state_reset = false; + coder->need_dictionary_reset = false; + + // The copying code uses coder->compressed_size to indicate the end + // of coder->buf[], so we need add the maximum size of the header here. + coder->compressed_size += LZMA2_HEADER_MAX; + + return; +} + + +static void +lzma2_header_uncompressed(lzma_lzma2_coder *coder) +{ + assert(coder->uncompressed_size > 0); + assert(coder->uncompressed_size <= LZMA2_CHUNK_MAX); + + // If this is the first chunk, we need to include dictionary + // reset indicator. + if (coder->need_dictionary_reset) + coder->buf[0] = 1; + else + coder->buf[0] = 2; + + coder->need_dictionary_reset = false; + + // "Compressed" size + coder->buf[1] = (coder->uncompressed_size - 1) >> 8; + coder->buf[2] = (coder->uncompressed_size - 1) & 0xFF; + + // Set the start position for copying. + coder->buf_pos = 0; + return; +} + + +static lzma_ret +lzma2_encode(void *coder_ptr, lzma_mf *restrict mf, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size) +{ + lzma_lzma2_coder *restrict coder = coder_ptr; + + while (*out_pos < out_size) + switch (coder->sequence) { + case SEQ_INIT: + // If there's no input left and we are flushing or finishing, + // don't start a new chunk. + if (mf_unencoded(mf) == 0) { + // Write end of payload marker if finishing. + if (mf->action == LZMA_FINISH) + out[(*out_pos)++] = 0; + + return mf->action == LZMA_RUN + ? LZMA_OK : LZMA_STREAM_END; + } + + if (coder->need_state_reset) + return_if_error(lzma_lzma_encoder_reset( + coder->lzma, &coder->opt_cur)); + + coder->uncompressed_size = 0; + coder->compressed_size = 0; + coder->sequence = SEQ_LZMA_ENCODE; + + // Fall through + + case SEQ_LZMA_ENCODE: { + // Calculate how much more uncompressed data this chunk + // could accept. + const uint32_t left = LZMA2_UNCOMPRESSED_MAX + - coder->uncompressed_size; + uint32_t limit; + + if (left < mf->match_len_max) { + // Must flush immediately since the next LZMA symbol + // could make the uncompressed size of the chunk too + // big. + limit = 0; + } else { + // Calculate maximum read_limit that is OK from point + // of view of LZMA2 chunk size. + limit = mf->read_pos - mf->read_ahead + + left - mf->match_len_max; + } + + // Save the start position so that we can update + // coder->uncompressed_size. + const uint32_t read_start = mf->read_pos - mf->read_ahead; + + // Call the LZMA encoder until the chunk is finished. + const lzma_ret ret = lzma_lzma_encode(coder->lzma, mf, + coder->buf + LZMA2_HEADER_MAX, + &coder->compressed_size, + LZMA2_CHUNK_MAX, limit); + + coder->uncompressed_size += mf->read_pos - mf->read_ahead + - read_start; + + assert(coder->compressed_size <= LZMA2_CHUNK_MAX); + assert(coder->uncompressed_size <= LZMA2_UNCOMPRESSED_MAX); + + if (ret != LZMA_STREAM_END) + return LZMA_OK; + + // See if the chunk compressed. If it didn't, we encode it + // as uncompressed chunk. This saves a few bytes of space + // and makes decoding faster. + if (coder->compressed_size >= coder->uncompressed_size) { + coder->uncompressed_size += mf->read_ahead; + assert(coder->uncompressed_size + <= LZMA2_UNCOMPRESSED_MAX); + mf->read_ahead = 0; + lzma2_header_uncompressed(coder); + coder->need_state_reset = true; + coder->sequence = SEQ_UNCOMPRESSED_HEADER; + break; + } + + // The chunk did compress at least by one byte, so we store + // the chunk as LZMA. + lzma2_header_lzma(coder); + + coder->sequence = SEQ_LZMA_COPY; + } + + // Fall through + + case SEQ_LZMA_COPY: + // Copy the compressed chunk along its headers to the + // output buffer. + lzma_bufcpy(coder->buf, &coder->buf_pos, + coder->compressed_size, + out, out_pos, out_size); + if (coder->buf_pos != coder->compressed_size) + return LZMA_OK; + + coder->sequence = SEQ_INIT; + break; + + case SEQ_UNCOMPRESSED_HEADER: + // Copy the three-byte header to indicate uncompressed chunk. + lzma_bufcpy(coder->buf, &coder->buf_pos, + LZMA2_HEADER_UNCOMPRESSED, + out, out_pos, out_size); + if (coder->buf_pos != LZMA2_HEADER_UNCOMPRESSED) + return LZMA_OK; + + coder->sequence = SEQ_UNCOMPRESSED_COPY; + + // Fall through + + case SEQ_UNCOMPRESSED_COPY: + // Copy the uncompressed data as is from the dictionary + // to the output buffer. + mf_read(mf, out, out_pos, out_size, &coder->uncompressed_size); + if (coder->uncompressed_size != 0) + return LZMA_OK; + + coder->sequence = SEQ_INIT; + break; + } + + return LZMA_OK; +} + + +static void +lzma2_encoder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_lzma2_coder *coder = coder_ptr; + lzma_free(coder->lzma, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +lzma2_encoder_options_update(void *coder_ptr, const lzma_filter *filter) +{ + lzma_lzma2_coder *coder = coder_ptr; + + // New options can be set only when there is no incomplete chunk. + // This is the case at the beginning of the raw stream and right + // after LZMA_SYNC_FLUSH. + if (filter->options == NULL || coder->sequence != SEQ_INIT) + return LZMA_PROG_ERROR; + + // Look if there are new options. At least for now, + // only lc/lp/pb can be changed. + const lzma_options_lzma *opt = filter->options; + if (coder->opt_cur.lc != opt->lc || coder->opt_cur.lp != opt->lp + || coder->opt_cur.pb != opt->pb) { + // Validate the options. + if (opt->lc > LZMA_LCLP_MAX || opt->lp > LZMA_LCLP_MAX + || opt->lc + opt->lp > LZMA_LCLP_MAX + || opt->pb > LZMA_PB_MAX) + return LZMA_OPTIONS_ERROR; + + // The new options will be used when the encoder starts + // a new LZMA2 chunk. + coder->opt_cur.lc = opt->lc; + coder->opt_cur.lp = opt->lp; + coder->opt_cur.pb = opt->pb; + coder->need_properties = true; + coder->need_state_reset = true; + } + + return LZMA_OK; +} + + +static lzma_ret +lzma2_encoder_init(lzma_lz_encoder *lz, const lzma_allocator *allocator, + lzma_vli id lzma_attribute((__unused__)), const void *options, + lzma_lz_options *lz_options) +{ + if (options == NULL) + return LZMA_PROG_ERROR; + + lzma_lzma2_coder *coder = lz->coder; + if (coder == NULL) { + coder = lzma_alloc(sizeof(lzma_lzma2_coder), allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + lz->coder = coder; + lz->code = &lzma2_encode; + lz->end = &lzma2_encoder_end; + lz->options_update = &lzma2_encoder_options_update; + + coder->lzma = NULL; + } + + coder->opt_cur = *(const lzma_options_lzma *)(options); + + coder->sequence = SEQ_INIT; + coder->need_properties = true; + coder->need_state_reset = false; + coder->need_dictionary_reset + = coder->opt_cur.preset_dict == NULL + || coder->opt_cur.preset_dict_size == 0; + + // Initialize LZMA encoder + return_if_error(lzma_lzma_encoder_create(&coder->lzma, allocator, + LZMA_FILTER_LZMA2, &coder->opt_cur, lz_options)); + + // Make sure that we will always have enough history available in + // case we need to use uncompressed chunks. They are used when the + // compressed size of a chunk is not smaller than the uncompressed + // size, so we need to have at least LZMA2_COMPRESSED_MAX bytes + // history available. + if (lz_options->before_size + lz_options->dict_size < LZMA2_CHUNK_MAX) + lz_options->before_size + = LZMA2_CHUNK_MAX - lz_options->dict_size; + + return LZMA_OK; +} + + +extern lzma_ret +lzma_lzma2_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return lzma_lz_encoder_init( + next, allocator, filters, &lzma2_encoder_init); +} + + +extern uint64_t +lzma_lzma2_encoder_memusage(const void *options) +{ + const uint64_t lzma_mem = lzma_lzma_encoder_memusage(options); + if (lzma_mem == UINT64_MAX) + return UINT64_MAX; + + return sizeof(lzma_lzma2_coder) + lzma_mem; +} + + +extern lzma_ret +lzma_lzma2_props_encode(const void *options, uint8_t *out) +{ + if (options == NULL) + return LZMA_PROG_ERROR; + + const lzma_options_lzma *const opt = options; + uint32_t d = my_max(opt->dict_size, LZMA_DICT_SIZE_MIN); + + // Round up to the next 2^n - 1 or 2^n + 2^(n - 1) - 1 depending + // on which one is the next: + --d; + d |= d >> 2; + d |= d >> 3; + d |= d >> 4; + d |= d >> 8; + d |= d >> 16; + + // Get the highest two bits using the proper encoding: + if (d == UINT32_MAX) + out[0] = 40; + else + out[0] = get_dist_slot(d + 1) - 24; + + return LZMA_OK; +} + + +extern uint64_t +lzma_lzma2_block_size(const void *options) +{ + const lzma_options_lzma *const opt = options; + + // Use at least 1 MiB to keep compression ratio better. + return my_max((uint64_t)(opt->dict_size) * 3, UINT64_C(1) << 20); +} diff --git a/src/liblzma/lzma/lzma2_encoder.h b/src/liblzma/lzma/lzma2_encoder.h new file mode 100644 index 0000000..515f183 --- /dev/null +++ b/src/liblzma/lzma/lzma2_encoder.h @@ -0,0 +1,43 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma2_encoder.h +/// \brief LZMA2 encoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZMA2_ENCODER_H +#define LZMA_LZMA2_ENCODER_H + +#include "common.h" + + +/// Maximum number of bytes of actual data per chunk (no headers) +#define LZMA2_CHUNK_MAX (UINT32_C(1) << 16) + +/// Maximum uncompressed size of LZMA chunk (no headers) +#define LZMA2_UNCOMPRESSED_MAX (UINT32_C(1) << 21) + +/// Maximum size of LZMA2 headers +#define LZMA2_HEADER_MAX 6 + +/// Size of a header for uncompressed chunk +#define LZMA2_HEADER_UNCOMPRESSED 3 + + +extern lzma_ret lzma_lzma2_encoder_init( + lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern uint64_t lzma_lzma2_encoder_memusage(const void *options); + +extern lzma_ret lzma_lzma2_props_encode(const void *options, uint8_t *out); + +extern uint64_t lzma_lzma2_block_size(const void *options); + +#endif diff --git a/src/liblzma/lzma/lzma_common.h b/src/liblzma/lzma/lzma_common.h new file mode 100644 index 0000000..9d040d9 --- /dev/null +++ b/src/liblzma/lzma/lzma_common.h @@ -0,0 +1,225 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_common.h +/// \brief Private definitions common to LZMA encoder and decoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZMA_COMMON_H +#define LZMA_LZMA_COMMON_H + +#include "common.h" +#include "range_common.h" + + +/////////////////// +// Miscellaneous // +/////////////////// + +/// Maximum number of position states. A position state is the lowest pos bits +/// number of bits of the current uncompressed offset. In some places there +/// are different sets of probabilities for different pos states. +#define POS_STATES_MAX (1 << LZMA_PB_MAX) + + +/// Validates lc, lp, and pb. +static inline bool +is_lclppb_valid(const lzma_options_lzma *options) +{ + return options->lc <= LZMA_LCLP_MAX && options->lp <= LZMA_LCLP_MAX + && options->lc + options->lp <= LZMA_LCLP_MAX + && options->pb <= LZMA_PB_MAX; +} + + +/////////// +// State // +/////////// + +/// This enum is used to track which events have occurred most recently and +/// in which order. This information is used to predict the next event. +/// +/// Events: +/// - Literal: One 8-bit byte +/// - Match: Repeat a chunk of data at some distance +/// - Long repeat: Multi-byte match at a recently seen distance +/// - Short repeat: One-byte repeat at a recently seen distance +/// +/// The event names are in from STATE_oldest_older_previous. REP means +/// either short or long repeated match, and NONLIT means any non-literal. +typedef enum { + STATE_LIT_LIT, + STATE_MATCH_LIT_LIT, + STATE_REP_LIT_LIT, + STATE_SHORTREP_LIT_LIT, + STATE_MATCH_LIT, + STATE_REP_LIT, + STATE_SHORTREP_LIT, + STATE_LIT_MATCH, + STATE_LIT_LONGREP, + STATE_LIT_SHORTREP, + STATE_NONLIT_MATCH, + STATE_NONLIT_REP, +} lzma_lzma_state; + + +/// Total number of states +#define STATES 12 + +/// The lowest 7 states indicate that the previous state was a literal. +#define LIT_STATES 7 + + +/// Indicate that the latest state was a literal. +#define update_literal(state) \ + state = ((state) <= STATE_SHORTREP_LIT_LIT \ + ? STATE_LIT_LIT \ + : ((state) <= STATE_LIT_SHORTREP \ + ? (state) - 3 \ + : (state) - 6)) + +/// Indicate that the latest state was a match. +#define update_match(state) \ + state = ((state) < LIT_STATES ? STATE_LIT_MATCH : STATE_NONLIT_MATCH) + +/// Indicate that the latest state was a long repeated match. +#define update_long_rep(state) \ + state = ((state) < LIT_STATES ? STATE_LIT_LONGREP : STATE_NONLIT_REP) + +/// Indicate that the latest state was a short match. +#define update_short_rep(state) \ + state = ((state) < LIT_STATES ? STATE_LIT_SHORTREP : STATE_NONLIT_REP) + +/// Test if the previous state was a literal. +#define is_literal_state(state) \ + ((state) < LIT_STATES) + + +///////////// +// Literal // +///////////// + +/// Each literal coder is divided in three sections: +/// - 0x001-0x0FF: Without match byte +/// - 0x101-0x1FF: With match byte; match bit is 0 +/// - 0x201-0x2FF: With match byte; match bit is 1 +/// +/// Match byte is used when the previous LZMA symbol was something else than +/// a literal (that is, it was some kind of match). +#define LITERAL_CODER_SIZE 0x300 + +/// Maximum number of literal coders +#define LITERAL_CODERS_MAX (1 << LZMA_LCLP_MAX) + +/// Locate the literal coder for the next literal byte. The choice depends on +/// - the lowest literal_pos_bits bits of the position of the current +/// byte; and +/// - the highest literal_context_bits bits of the previous byte. +#define literal_subcoder(probs, lc, lp_mask, pos, prev_byte) \ + ((probs)[(((pos) & (lp_mask)) << (lc)) \ + + ((uint32_t)(prev_byte) >> (8U - (lc)))]) + + +static inline void +literal_init(probability (*probs)[LITERAL_CODER_SIZE], + uint32_t lc, uint32_t lp) +{ + assert(lc + lp <= LZMA_LCLP_MAX); + + const uint32_t coders = 1U << (lc + lp); + + for (uint32_t i = 0; i < coders; ++i) + for (uint32_t j = 0; j < LITERAL_CODER_SIZE; ++j) + bit_reset(probs[i][j]); + + return; +} + + +////////////////// +// Match length // +////////////////// + +// Minimum length of a match is two bytes. +#define MATCH_LEN_MIN 2 + +// Match length is encoded with 4, 5, or 10 bits. +// +// Length Bits +// 2-9 4 = Choice=0 + 3 bits +// 10-17 5 = Choice=1 + Choice2=0 + 3 bits +// 18-273 10 = Choice=1 + Choice2=1 + 8 bits +#define LEN_LOW_BITS 3 +#define LEN_LOW_SYMBOLS (1 << LEN_LOW_BITS) +#define LEN_MID_BITS 3 +#define LEN_MID_SYMBOLS (1 << LEN_MID_BITS) +#define LEN_HIGH_BITS 8 +#define LEN_HIGH_SYMBOLS (1 << LEN_HIGH_BITS) +#define LEN_SYMBOLS (LEN_LOW_SYMBOLS + LEN_MID_SYMBOLS + LEN_HIGH_SYMBOLS) + +// Maximum length of a match is 273 which is a result of the encoding +// described above. +#define MATCH_LEN_MAX (MATCH_LEN_MIN + LEN_SYMBOLS - 1) + + +//////////////////// +// Match distance // +//////////////////// + +// Different sets of probabilities are used for match distances that have very +// short match length: Lengths of 2, 3, and 4 bytes have a separate set of +// probabilities for each length. The matches with longer length use a shared +// set of probabilities. +#define DIST_STATES 4 + +// Macro to get the index of the appropriate probability array. +#define get_dist_state(len) \ + ((len) < DIST_STATES + MATCH_LEN_MIN \ + ? (len) - MATCH_LEN_MIN \ + : DIST_STATES - 1) + +// The highest two bits of a match distance (distance slot) are encoded +// using six bits. See fastpos.h for more explanation. +#define DIST_SLOT_BITS 6 +#define DIST_SLOTS (1 << DIST_SLOT_BITS) + +// Match distances up to 127 are fully encoded using probabilities. Since +// the highest two bits (distance slot) are always encoded using six bits, +// the distances 0-3 don't need any additional bits to encode, since the +// distance slot itself is the same as the actual distance. DIST_MODEL_START +// indicates the first distance slot where at least one additional bit is +// needed. +#define DIST_MODEL_START 4 + +// Match distances greater than 127 are encoded in three pieces: +// - distance slot: the highest two bits +// - direct bits: 2-26 bits below the highest two bits +// - alignment bits: four lowest bits +// +// Direct bits don't use any probabilities. +// +// The distance slot value of 14 is for distances 128-191 (see the table in +// fastpos.h to understand why). +#define DIST_MODEL_END 14 + +// Distance slots that indicate a distance <= 127. +#define FULL_DISTANCES_BITS (DIST_MODEL_END / 2) +#define FULL_DISTANCES (1 << FULL_DISTANCES_BITS) + +// For match distances greater than 127, only the highest two bits and the +// lowest four bits (alignment) is encoded using probabilities. +#define ALIGN_BITS 4 +#define ALIGN_SIZE (1 << ALIGN_BITS) +#define ALIGN_MASK (ALIGN_SIZE - 1) + +// LZMA remembers the four most recent match distances. Reusing these distances +// tends to take less space than re-encoding the actual distance value. +#define REPS 4 + +#endif diff --git a/src/liblzma/lzma/lzma_decoder.c b/src/liblzma/lzma/lzma_decoder.c new file mode 100644 index 0000000..26c148a --- /dev/null +++ b/src/liblzma/lzma/lzma_decoder.c @@ -0,0 +1,1133 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_decoder.c +/// \brief LZMA decoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lz_decoder.h" +#include "lzma_common.h" +#include "lzma_decoder.h" +#include "range_decoder.h" + +// The macros unroll loops with switch statements. +// Silence warnings about missing fall-through comments. +#if TUKLIB_GNUC_REQ(7, 0) +# pragma GCC diagnostic ignored "-Wimplicit-fallthrough" +#endif + + +#ifdef HAVE_SMALL + +// Macros for (somewhat) size-optimized code. +#define seq_4(seq) seq + +#define seq_6(seq) seq + +#define seq_8(seq) seq + +#define seq_len(seq) \ + seq ## _CHOICE, \ + seq ## _CHOICE2, \ + seq ## _BITTREE + +#define len_decode(target, ld, pos_state, seq) \ +do { \ +case seq ## _CHOICE: \ + rc_if_0(ld.choice, seq ## _CHOICE) { \ + rc_update_0(ld.choice); \ + probs = ld.low[pos_state];\ + limit = LEN_LOW_SYMBOLS; \ + target = MATCH_LEN_MIN; \ + } else { \ + rc_update_1(ld.choice); \ +case seq ## _CHOICE2: \ + rc_if_0(ld.choice2, seq ## _CHOICE2) { \ + rc_update_0(ld.choice2); \ + probs = ld.mid[pos_state]; \ + limit = LEN_MID_SYMBOLS; \ + target = MATCH_LEN_MIN + LEN_LOW_SYMBOLS; \ + } else { \ + rc_update_1(ld.choice2); \ + probs = ld.high; \ + limit = LEN_HIGH_SYMBOLS; \ + target = MATCH_LEN_MIN + LEN_LOW_SYMBOLS \ + + LEN_MID_SYMBOLS; \ + } \ + } \ + symbol = 1; \ +case seq ## _BITTREE: \ + do { \ + rc_bit(probs[symbol], , , seq ## _BITTREE); \ + } while (symbol < limit); \ + target += symbol - limit; \ +} while (0) + +#else // HAVE_SMALL + +// Unrolled versions +#define seq_4(seq) \ + seq ## 0, \ + seq ## 1, \ + seq ## 2, \ + seq ## 3 + +#define seq_6(seq) \ + seq ## 0, \ + seq ## 1, \ + seq ## 2, \ + seq ## 3, \ + seq ## 4, \ + seq ## 5 + +#define seq_8(seq) \ + seq ## 0, \ + seq ## 1, \ + seq ## 2, \ + seq ## 3, \ + seq ## 4, \ + seq ## 5, \ + seq ## 6, \ + seq ## 7 + +#define seq_len(seq) \ + seq ## _CHOICE, \ + seq ## _LOW0, \ + seq ## _LOW1, \ + seq ## _LOW2, \ + seq ## _CHOICE2, \ + seq ## _MID0, \ + seq ## _MID1, \ + seq ## _MID2, \ + seq ## _HIGH0, \ + seq ## _HIGH1, \ + seq ## _HIGH2, \ + seq ## _HIGH3, \ + seq ## _HIGH4, \ + seq ## _HIGH5, \ + seq ## _HIGH6, \ + seq ## _HIGH7 + +#define len_decode(target, ld, pos_state, seq) \ +do { \ + symbol = 1; \ +case seq ## _CHOICE: \ + rc_if_0(ld.choice, seq ## _CHOICE) { \ + rc_update_0(ld.choice); \ + rc_bit_case(ld.low[pos_state][symbol], , , seq ## _LOW0); \ + rc_bit_case(ld.low[pos_state][symbol], , , seq ## _LOW1); \ + rc_bit_case(ld.low[pos_state][symbol], , , seq ## _LOW2); \ + target = symbol - LEN_LOW_SYMBOLS + MATCH_LEN_MIN; \ + } else { \ + rc_update_1(ld.choice); \ +case seq ## _CHOICE2: \ + rc_if_0(ld.choice2, seq ## _CHOICE2) { \ + rc_update_0(ld.choice2); \ + rc_bit_case(ld.mid[pos_state][symbol], , , \ + seq ## _MID0); \ + rc_bit_case(ld.mid[pos_state][symbol], , , \ + seq ## _MID1); \ + rc_bit_case(ld.mid[pos_state][symbol], , , \ + seq ## _MID2); \ + target = symbol - LEN_MID_SYMBOLS \ + + MATCH_LEN_MIN + LEN_LOW_SYMBOLS; \ + } else { \ + rc_update_1(ld.choice2); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH0); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH1); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH2); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH3); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH4); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH5); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH6); \ + rc_bit_case(ld.high[symbol], , , seq ## _HIGH7); \ + target = symbol - LEN_HIGH_SYMBOLS \ + + MATCH_LEN_MIN \ + + LEN_LOW_SYMBOLS + LEN_MID_SYMBOLS; \ + } \ + } \ +} while (0) + +#endif // HAVE_SMALL + + +/// Length decoder probabilities; see comments in lzma_common.h. +typedef struct { + probability choice; + probability choice2; + probability low[POS_STATES_MAX][LEN_LOW_SYMBOLS]; + probability mid[POS_STATES_MAX][LEN_MID_SYMBOLS]; + probability high[LEN_HIGH_SYMBOLS]; +} lzma_length_decoder; + + +typedef struct { + /////////////////// + // Probabilities // + /////////////////// + + /// Literals; see comments in lzma_common.h. + probability literal[LITERAL_CODERS_MAX][LITERAL_CODER_SIZE]; + + /// If 1, it's a match. Otherwise it's a single 8-bit literal. + probability is_match[STATES][POS_STATES_MAX]; + + /// If 1, it's a repeated match. The distance is one of rep0 .. rep3. + probability is_rep[STATES]; + + /// If 0, distance of a repeated match is rep0. + /// Otherwise check is_rep1. + probability is_rep0[STATES]; + + /// If 0, distance of a repeated match is rep1. + /// Otherwise check is_rep2. + probability is_rep1[STATES]; + + /// If 0, distance of a repeated match is rep2. Otherwise it is rep3. + probability is_rep2[STATES]; + + /// If 1, the repeated match has length of one byte. Otherwise + /// the length is decoded from rep_len_decoder. + probability is_rep0_long[STATES][POS_STATES_MAX]; + + /// Probability tree for the highest two bits of the match distance. + /// There is a separate probability tree for match lengths of + /// 2 (i.e. MATCH_LEN_MIN), 3, 4, and [5, 273]. + probability dist_slot[DIST_STATES][DIST_SLOTS]; + + /// Probability trees for additional bits for match distance when the + /// distance is in the range [4, 127]. + probability pos_special[FULL_DISTANCES - DIST_MODEL_END]; + + /// Probability tree for the lowest four bits of a match distance + /// that is equal to or greater than 128. + probability pos_align[ALIGN_SIZE]; + + /// Length of a normal match + lzma_length_decoder match_len_decoder; + + /// Length of a repeated match + lzma_length_decoder rep_len_decoder; + + /////////////////// + // Decoder state // + /////////////////// + + // Range coder + lzma_range_decoder rc; + + // Types of the most recently seen LZMA symbols + lzma_lzma_state state; + + uint32_t rep0; ///< Distance of the latest match + uint32_t rep1; ///< Distance of second latest match + uint32_t rep2; ///< Distance of third latest match + uint32_t rep3; ///< Distance of fourth latest match + + uint32_t pos_mask; // (1U << pb) - 1 + uint32_t literal_context_bits; + uint32_t literal_pos_mask; + + /// Uncompressed size as bytes, or LZMA_VLI_UNKNOWN if end of + /// payload marker is expected. + lzma_vli uncompressed_size; + + /// True if end of payload marker (EOPM) is allowed even when + /// uncompressed_size is known; false if EOPM must not be present. + /// This is ignored if uncompressed_size == LZMA_VLI_UNKNOWN. + bool allow_eopm; + + //////////////////////////////// + // State of incomplete symbol // + //////////////////////////////// + + /// Position where to continue the decoder loop + enum { + SEQ_NORMALIZE, + SEQ_IS_MATCH, + seq_8(SEQ_LITERAL), + seq_8(SEQ_LITERAL_MATCHED), + SEQ_LITERAL_WRITE, + SEQ_IS_REP, + seq_len(SEQ_MATCH_LEN), + seq_6(SEQ_DIST_SLOT), + SEQ_DIST_MODEL, + SEQ_DIRECT, + seq_4(SEQ_ALIGN), + SEQ_EOPM, + SEQ_IS_REP0, + SEQ_SHORTREP, + SEQ_IS_REP0_LONG, + SEQ_IS_REP1, + SEQ_IS_REP2, + seq_len(SEQ_REP_LEN), + SEQ_COPY, + } sequence; + + /// Base of the current probability tree + probability *probs; + + /// Symbol being decoded. This is also used as an index variable in + /// bittree decoders: probs[symbol] + uint32_t symbol; + + /// Used as a loop termination condition on bittree decoders and + /// direct bits decoder. + uint32_t limit; + + /// Matched literal decoder: 0x100 or 0 to help avoiding branches. + /// Bittree reverse decoders: Offset of the next bit: 1 << offset + uint32_t offset; + + /// If decoding a literal: match byte. + /// If decoding a match: length of the match. + uint32_t len; +} lzma_lzma1_decoder; + + +static lzma_ret +lzma_decode(void *coder_ptr, lzma_dict *restrict dictptr, + const uint8_t *restrict in, + size_t *restrict in_pos, size_t in_size) +{ + lzma_lzma1_decoder *restrict coder = coder_ptr; + + //////////////////// + // Initialization // + //////////////////// + + { + const lzma_ret ret = rc_read_init( + &coder->rc, in, in_pos, in_size); + if (ret != LZMA_STREAM_END) + return ret; + } + + /////////////// + // Variables // + /////////////// + + // Making local copies of often-used variables improves both + // speed and readability. + + lzma_dict dict = *dictptr; + + const size_t dict_start = dict.pos; + + // Range decoder + rc_to_local(coder->rc, *in_pos); + + // State + uint32_t state = coder->state; + uint32_t rep0 = coder->rep0; + uint32_t rep1 = coder->rep1; + uint32_t rep2 = coder->rep2; + uint32_t rep3 = coder->rep3; + + const uint32_t pos_mask = coder->pos_mask; + + // These variables are actually needed only if we last time ran + // out of input in the middle of the decoder loop. + probability *probs = coder->probs; + uint32_t symbol = coder->symbol; + uint32_t limit = coder->limit; + uint32_t offset = coder->offset; + uint32_t len = coder->len; + + const uint32_t literal_pos_mask = coder->literal_pos_mask; + const uint32_t literal_context_bits = coder->literal_context_bits; + + // Temporary variables + uint32_t pos_state = dict.pos & pos_mask; + + lzma_ret ret = LZMA_OK; + + // This is true when the next LZMA symbol is allowed to be EOPM. + // That is, if this is false, then EOPM is considered + // an invalid symbol and we will return LZMA_DATA_ERROR. + // + // EOPM is always required (not just allowed) when + // the uncompressed size isn't known. When uncompressed size + // is known, eopm_is_valid may be set to true later. + bool eopm_is_valid = coder->uncompressed_size == LZMA_VLI_UNKNOWN; + + // If uncompressed size is known and there is enough output space + // to decode all the data, limit the available buffer space so that + // the main loop won't try to decode past the end of the stream. + bool might_finish_without_eopm = false; + if (coder->uncompressed_size != LZMA_VLI_UNKNOWN + && coder->uncompressed_size <= dict.limit - dict.pos) { + dict.limit = dict.pos + (size_t)(coder->uncompressed_size); + might_finish_without_eopm = true; + } + + // The main decoder loop. The "switch" is used to restart the decoder at + // correct location. Once restarted, the "switch" is no longer used. + switch (coder->sequence) + while (true) { + // Calculate new pos_state. This is skipped on the first loop + // since we already calculated it when setting up the local + // variables. + pos_state = dict.pos & pos_mask; + + case SEQ_NORMALIZE: + case SEQ_IS_MATCH: + if (unlikely(might_finish_without_eopm + && dict.pos == dict.limit)) { + // In rare cases there is a useless byte that needs + // to be read anyway. + rc_normalize(SEQ_NORMALIZE); + + // If the range decoder state is such that we can + // be at the end of the LZMA stream, then the + // decoding is finished. + if (rc_is_finished(rc)) { + ret = LZMA_STREAM_END; + goto out; + } + + // If the caller hasn't allowed EOPM to be present + // together with known uncompressed size, then the + // LZMA stream is corrupt. + if (!coder->allow_eopm) { + ret = LZMA_DATA_ERROR; + goto out; + } + + // Otherwise continue decoding with the expectation + // that the next LZMA symbol is EOPM. + eopm_is_valid = true; + } + + rc_if_0(coder->is_match[state][pos_state], SEQ_IS_MATCH) { + rc_update_0(coder->is_match[state][pos_state]); + + // It's a literal i.e. a single 8-bit byte. + + probs = literal_subcoder(coder->literal, + literal_context_bits, literal_pos_mask, + dict.pos, dict_get(&dict, 0)); + symbol = 1; + + if (is_literal_state(state)) { + // Decode literal without match byte. +#ifdef HAVE_SMALL + case SEQ_LITERAL: + do { + rc_bit(probs[symbol], , , SEQ_LITERAL); + } while (symbol < (1 << 8)); +#else + rc_bit_case(probs[symbol], , , SEQ_LITERAL0); + rc_bit_case(probs[symbol], , , SEQ_LITERAL1); + rc_bit_case(probs[symbol], , , SEQ_LITERAL2); + rc_bit_case(probs[symbol], , , SEQ_LITERAL3); + rc_bit_case(probs[symbol], , , SEQ_LITERAL4); + rc_bit_case(probs[symbol], , , SEQ_LITERAL5); + rc_bit_case(probs[symbol], , , SEQ_LITERAL6); + rc_bit_case(probs[symbol], , , SEQ_LITERAL7); +#endif + } else { + // Decode literal with match byte. + // + // We store the byte we compare against + // ("match byte") to "len" to minimize the + // number of variables we need to store + // between decoder calls. + len = (uint32_t)(dict_get(&dict, rep0)) << 1; + + // The usage of "offset" allows omitting some + // branches, which should give tiny speed + // improvement on some CPUs. "offset" gets + // set to zero if match_bit didn't match. + offset = 0x100; + +#ifdef HAVE_SMALL + case SEQ_LITERAL_MATCHED: + do { + const uint32_t match_bit + = len & offset; + const uint32_t subcoder_index + = offset + match_bit + + symbol; + + rc_bit(probs[subcoder_index], + offset &= ~match_bit, + offset &= match_bit, + SEQ_LITERAL_MATCHED); + + // It seems to be faster to do this + // here instead of putting it to the + // beginning of the loop and then + // putting the "case" in the middle + // of the loop. + len <<= 1; + + } while (symbol < (1 << 8)); +#else + // Unroll the loop. + uint32_t match_bit; + uint32_t subcoder_index; + +# define d(seq) \ + case seq: \ + match_bit = len & offset; \ + subcoder_index = offset + match_bit + symbol; \ + rc_bit(probs[subcoder_index], \ + offset &= ~match_bit, \ + offset &= match_bit, \ + seq) + + d(SEQ_LITERAL_MATCHED0); + len <<= 1; + d(SEQ_LITERAL_MATCHED1); + len <<= 1; + d(SEQ_LITERAL_MATCHED2); + len <<= 1; + d(SEQ_LITERAL_MATCHED3); + len <<= 1; + d(SEQ_LITERAL_MATCHED4); + len <<= 1; + d(SEQ_LITERAL_MATCHED5); + len <<= 1; + d(SEQ_LITERAL_MATCHED6); + len <<= 1; + d(SEQ_LITERAL_MATCHED7); +# undef d +#endif + } + + //update_literal(state); + // Use a lookup table to update to literal state, + // since compared to other state updates, this would + // need two branches. + static const lzma_lzma_state next_state[] = { + STATE_LIT_LIT, + STATE_LIT_LIT, + STATE_LIT_LIT, + STATE_LIT_LIT, + STATE_MATCH_LIT_LIT, + STATE_REP_LIT_LIT, + STATE_SHORTREP_LIT_LIT, + STATE_MATCH_LIT, + STATE_REP_LIT, + STATE_SHORTREP_LIT, + STATE_MATCH_LIT, + STATE_REP_LIT + }; + state = next_state[state]; + + case SEQ_LITERAL_WRITE: + if (unlikely(dict_put(&dict, symbol))) { + coder->sequence = SEQ_LITERAL_WRITE; + goto out; + } + + continue; + } + + // Instead of a new byte we are going to get a byte range + // (distance and length) which will be repeated from our + // output history. + + rc_update_1(coder->is_match[state][pos_state]); + + case SEQ_IS_REP: + rc_if_0(coder->is_rep[state], SEQ_IS_REP) { + // Not a repeated match + rc_update_0(coder->is_rep[state]); + update_match(state); + + // The latest three match distances are kept in + // memory in case there are repeated matches. + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + + // Decode the length of the match. + len_decode(len, coder->match_len_decoder, + pos_state, SEQ_MATCH_LEN); + + // Prepare to decode the highest two bits of the + // match distance. + probs = coder->dist_slot[get_dist_state(len)]; + symbol = 1; + +#ifdef HAVE_SMALL + case SEQ_DIST_SLOT: + do { + rc_bit(probs[symbol], , , SEQ_DIST_SLOT); + } while (symbol < DIST_SLOTS); +#else + rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT0); + rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT1); + rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT2); + rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT3); + rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT4); + rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT5); +#endif + // Get rid of the highest bit that was needed for + // indexing of the probability array. + symbol -= DIST_SLOTS; + assert(symbol <= 63); + + if (symbol < DIST_MODEL_START) { + // Match distances [0, 3] have only two bits. + rep0 = symbol; + } else { + // Decode the lowest [1, 29] bits of + // the match distance. + limit = (symbol >> 1) - 1; + assert(limit >= 1 && limit <= 30); + rep0 = 2 + (symbol & 1); + + if (symbol < DIST_MODEL_END) { + // Prepare to decode the low bits for + // a distance of [4, 127]. + assert(limit <= 5); + rep0 <<= limit; + assert(rep0 <= 96); + // -1 is fine, because we start + // decoding at probs[1], not probs[0]. + // NOTE: This violates the C standard, + // since we are doing pointer + // arithmetic past the beginning of + // the array. + assert((int32_t)(rep0 - symbol - 1) + >= -1); + assert((int32_t)(rep0 - symbol - 1) + <= 82); + probs = coder->pos_special + rep0 + - symbol - 1; + symbol = 1; + offset = 0; + case SEQ_DIST_MODEL: +#ifdef HAVE_SMALL + do { + rc_bit(probs[symbol], , + rep0 += 1U << offset, + SEQ_DIST_MODEL); + } while (++offset < limit); +#else + switch (limit) { + case 5: + assert(offset == 0); + rc_bit(probs[symbol], , + rep0 += 1U, + SEQ_DIST_MODEL); + ++offset; + --limit; + case 4: + rc_bit(probs[symbol], , + rep0 += 1U << offset, + SEQ_DIST_MODEL); + ++offset; + --limit; + case 3: + rc_bit(probs[symbol], , + rep0 += 1U << offset, + SEQ_DIST_MODEL); + ++offset; + --limit; + case 2: + rc_bit(probs[symbol], , + rep0 += 1U << offset, + SEQ_DIST_MODEL); + ++offset; + --limit; + case 1: + // We need "symbol" only for + // indexing the probability + // array, thus we can use + // rc_bit_last() here to omit + // the unneeded updating of + // "symbol". + rc_bit_last(probs[symbol], , + rep0 += 1U << offset, + SEQ_DIST_MODEL); + } +#endif + } else { + // The distance is >= 128. Decode the + // lower bits without probabilities + // except the lowest four bits. + assert(symbol >= 14); + assert(limit >= 6); + limit -= ALIGN_BITS; + assert(limit >= 2); + case SEQ_DIRECT: + // Not worth manual unrolling + do { + rc_direct(rep0, SEQ_DIRECT); + } while (--limit > 0); + + // Decode the lowest four bits using + // probabilities. + rep0 <<= ALIGN_BITS; + symbol = 1; +#ifdef HAVE_SMALL + offset = 0; + case SEQ_ALIGN: + do { + rc_bit(coder->pos_align[ + symbol], , + rep0 += 1U << offset, + SEQ_ALIGN); + } while (++offset < ALIGN_BITS); +#else + case SEQ_ALIGN0: + rc_bit(coder->pos_align[symbol], , + rep0 += 1, SEQ_ALIGN0); + case SEQ_ALIGN1: + rc_bit(coder->pos_align[symbol], , + rep0 += 2, SEQ_ALIGN1); + case SEQ_ALIGN2: + rc_bit(coder->pos_align[symbol], , + rep0 += 4, SEQ_ALIGN2); + case SEQ_ALIGN3: + // Like in SEQ_DIST_MODEL, we don't + // need "symbol" for anything else + // than indexing the probability array. + rc_bit_last(coder->pos_align[symbol], , + rep0 += 8, SEQ_ALIGN3); +#endif + + if (rep0 == UINT32_MAX) { + // End of payload marker was + // found. It may only be + // present if + // - uncompressed size is + // unknown or + // - after known uncompressed + // size amount of bytes has + // been decompressed and + // caller has indicated + // that EOPM might be used + // (it's not allowed in + // LZMA2). + if (!eopm_is_valid) { + ret = LZMA_DATA_ERROR; + goto out; + } + + case SEQ_EOPM: + // LZMA1 stream with + // end-of-payload marker. + rc_normalize(SEQ_EOPM); + ret = rc_is_finished(rc) + ? LZMA_STREAM_END + : LZMA_DATA_ERROR; + goto out; + } + } + } + + // Validate the distance we just decoded. + if (unlikely(!dict_is_distance_valid(&dict, rep0))) { + ret = LZMA_DATA_ERROR; + goto out; + } + + } else { + rc_update_1(coder->is_rep[state]); + + // Repeated match + // + // The match distance is a value that we have had + // earlier. The latest four match distances are + // available as rep0, rep1, rep2 and rep3. We will + // now decode which of them is the new distance. + // + // There cannot be a match if we haven't produced + // any output, so check that first. + if (unlikely(!dict_is_distance_valid(&dict, 0))) { + ret = LZMA_DATA_ERROR; + goto out; + } + + case SEQ_IS_REP0: + rc_if_0(coder->is_rep0[state], SEQ_IS_REP0) { + rc_update_0(coder->is_rep0[state]); + // The distance is rep0. + + case SEQ_IS_REP0_LONG: + rc_if_0(coder->is_rep0_long[state][pos_state], + SEQ_IS_REP0_LONG) { + rc_update_0(coder->is_rep0_long[ + state][pos_state]); + + update_short_rep(state); + + case SEQ_SHORTREP: + if (unlikely(dict_put(&dict, dict_get( + &dict, rep0)))) { + coder->sequence = SEQ_SHORTREP; + goto out; + } + + continue; + } + + // Repeating more than one byte at + // distance of rep0. + rc_update_1(coder->is_rep0_long[ + state][pos_state]); + + } else { + rc_update_1(coder->is_rep0[state]); + + case SEQ_IS_REP1: + // The distance is rep1, rep2 or rep3. Once + // we find out which one of these three, it + // is stored to rep0 and rep1, rep2 and rep3 + // are updated accordingly. + rc_if_0(coder->is_rep1[state], SEQ_IS_REP1) { + rc_update_0(coder->is_rep1[state]); + + const uint32_t distance = rep1; + rep1 = rep0; + rep0 = distance; + + } else { + rc_update_1(coder->is_rep1[state]); + case SEQ_IS_REP2: + rc_if_0(coder->is_rep2[state], + SEQ_IS_REP2) { + rc_update_0(coder->is_rep2[ + state]); + + const uint32_t distance = rep2; + rep2 = rep1; + rep1 = rep0; + rep0 = distance; + + } else { + rc_update_1(coder->is_rep2[ + state]); + + const uint32_t distance = rep3; + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + rep0 = distance; + } + } + } + + update_long_rep(state); + + // Decode the length of the repeated match. + len_decode(len, coder->rep_len_decoder, + pos_state, SEQ_REP_LEN); + } + + ///////////////////////////////// + // Repeat from history buffer. // + ///////////////////////////////// + + // The length is always between these limits. There is no way + // to trigger the algorithm to set len outside this range. + assert(len >= MATCH_LEN_MIN); + assert(len <= MATCH_LEN_MAX); + + case SEQ_COPY: + // Repeat len bytes from distance of rep0. + if (unlikely(dict_repeat(&dict, rep0, &len))) { + coder->sequence = SEQ_COPY; + goto out; + } + } + +out: + // Save state + + // NOTE: Must not copy dict.limit. + dictptr->pos = dict.pos; + dictptr->full = dict.full; + + rc_from_local(coder->rc, *in_pos); + + coder->state = state; + coder->rep0 = rep0; + coder->rep1 = rep1; + coder->rep2 = rep2; + coder->rep3 = rep3; + + coder->probs = probs; + coder->symbol = symbol; + coder->limit = limit; + coder->offset = offset; + coder->len = len; + + // Update the remaining amount of uncompressed data if uncompressed + // size was known. + if (coder->uncompressed_size != LZMA_VLI_UNKNOWN) { + coder->uncompressed_size -= dict.pos - dict_start; + + // If we have gotten all the output but the decoder wants + // to write more output, the file is corrupt. There are + // three SEQ values where output is produced. + if (coder->uncompressed_size == 0 && ret == LZMA_OK + && (coder->sequence == SEQ_LITERAL_WRITE + || coder->sequence == SEQ_SHORTREP + || coder->sequence == SEQ_COPY)) + ret = LZMA_DATA_ERROR; + } + + if (ret == LZMA_STREAM_END) { + // Reset the range decoder so that it is ready to reinitialize + // for a new LZMA2 chunk. + rc_reset(coder->rc); + coder->sequence = SEQ_IS_MATCH; + } + + return ret; +} + + + +static void +lzma_decoder_uncompressed(void *coder_ptr, lzma_vli uncompressed_size, + bool allow_eopm) +{ + lzma_lzma1_decoder *coder = coder_ptr; + coder->uncompressed_size = uncompressed_size; + coder->allow_eopm = allow_eopm; +} + + +static void +lzma_decoder_reset(void *coder_ptr, const void *opt) +{ + lzma_lzma1_decoder *coder = coder_ptr; + const lzma_options_lzma *options = opt; + + // NOTE: We assume that lc/lp/pb are valid since they were + // successfully decoded with lzma_lzma_decode_properties(). + + // Calculate pos_mask. We don't need pos_bits as is for anything. + coder->pos_mask = (1U << options->pb) - 1; + + // Initialize the literal decoder. + literal_init(coder->literal, options->lc, options->lp); + + coder->literal_context_bits = options->lc; + coder->literal_pos_mask = (1U << options->lp) - 1; + + // State + coder->state = STATE_LIT_LIT; + coder->rep0 = 0; + coder->rep1 = 0; + coder->rep2 = 0; + coder->rep3 = 0; + coder->pos_mask = (1U << options->pb) - 1; + + // Range decoder + rc_reset(coder->rc); + + // Bit and bittree decoders + for (uint32_t i = 0; i < STATES; ++i) { + for (uint32_t j = 0; j <= coder->pos_mask; ++j) { + bit_reset(coder->is_match[i][j]); + bit_reset(coder->is_rep0_long[i][j]); + } + + bit_reset(coder->is_rep[i]); + bit_reset(coder->is_rep0[i]); + bit_reset(coder->is_rep1[i]); + bit_reset(coder->is_rep2[i]); + } + + for (uint32_t i = 0; i < DIST_STATES; ++i) + bittree_reset(coder->dist_slot[i], DIST_SLOT_BITS); + + for (uint32_t i = 0; i < FULL_DISTANCES - DIST_MODEL_END; ++i) + bit_reset(coder->pos_special[i]); + + bittree_reset(coder->pos_align, ALIGN_BITS); + + // Len decoders (also bit/bittree) + const uint32_t num_pos_states = 1U << options->pb; + bit_reset(coder->match_len_decoder.choice); + bit_reset(coder->match_len_decoder.choice2); + bit_reset(coder->rep_len_decoder.choice); + bit_reset(coder->rep_len_decoder.choice2); + + for (uint32_t pos_state = 0; pos_state < num_pos_states; ++pos_state) { + bittree_reset(coder->match_len_decoder.low[pos_state], + LEN_LOW_BITS); + bittree_reset(coder->match_len_decoder.mid[pos_state], + LEN_MID_BITS); + + bittree_reset(coder->rep_len_decoder.low[pos_state], + LEN_LOW_BITS); + bittree_reset(coder->rep_len_decoder.mid[pos_state], + LEN_MID_BITS); + } + + bittree_reset(coder->match_len_decoder.high, LEN_HIGH_BITS); + bittree_reset(coder->rep_len_decoder.high, LEN_HIGH_BITS); + + coder->sequence = SEQ_IS_MATCH; + coder->probs = NULL; + coder->symbol = 0; + coder->limit = 0; + coder->offset = 0; + coder->len = 0; + + return; +} + + +extern lzma_ret +lzma_lzma_decoder_create(lzma_lz_decoder *lz, const lzma_allocator *allocator, + const lzma_options_lzma *options, lzma_lz_options *lz_options) +{ + if (lz->coder == NULL) { + lz->coder = lzma_alloc(sizeof(lzma_lzma1_decoder), allocator); + if (lz->coder == NULL) + return LZMA_MEM_ERROR; + + lz->code = &lzma_decode; + lz->reset = &lzma_decoder_reset; + lz->set_uncompressed = &lzma_decoder_uncompressed; + } + + // All dictionary sizes are OK here. LZ decoder will take care of + // the special cases. + lz_options->dict_size = options->dict_size; + lz_options->preset_dict = options->preset_dict; + lz_options->preset_dict_size = options->preset_dict_size; + + return LZMA_OK; +} + + +/// Allocate and initialize LZMA decoder. This is used only via LZ +/// initialization (lzma_lzma_decoder_init() passes function pointer to +/// the LZ initialization). +static lzma_ret +lzma_decoder_init(lzma_lz_decoder *lz, const lzma_allocator *allocator, + lzma_vli id, const void *options, lzma_lz_options *lz_options) +{ + if (!is_lclppb_valid(options)) + return LZMA_PROG_ERROR; + + lzma_vli uncomp_size = LZMA_VLI_UNKNOWN; + bool allow_eopm = true; + + if (id == LZMA_FILTER_LZMA1EXT) { + const lzma_options_lzma *opt = options; + + // Only one flag is supported. + if (opt->ext_flags & ~LZMA_LZMA1EXT_ALLOW_EOPM) + return LZMA_OPTIONS_ERROR; + + // FIXME? Using lzma_vli instead of uint64_t is weird because + // this has nothing to do with .xz headers and variable-length + // integer encoding. On the other hand, using LZMA_VLI_UNKNOWN + // instead of UINT64_MAX is clearer when unknown size is + // meant. A problem with using lzma_vli is that now we + // allow > LZMA_VLI_MAX which is fine in this file but + // it's still confusing. Note that alone_decoder.c also + // allows > LZMA_VLI_MAX when setting uncompressed size. + uncomp_size = opt->ext_size_low + + ((uint64_t)(opt->ext_size_high) << 32); + allow_eopm = (opt->ext_flags & LZMA_LZMA1EXT_ALLOW_EOPM) != 0 + || uncomp_size == LZMA_VLI_UNKNOWN; + } + + return_if_error(lzma_lzma_decoder_create( + lz, allocator, options, lz_options)); + + lzma_decoder_reset(lz->coder, options); + lzma_decoder_uncompressed(lz->coder, uncomp_size, allow_eopm); + + return LZMA_OK; +} + + +extern lzma_ret +lzma_lzma_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + // LZMA can only be the last filter in the chain. This is enforced + // by the raw_decoder initialization. + assert(filters[1].init == NULL); + + return lzma_lz_decoder_init(next, allocator, filters, + &lzma_decoder_init); +} + + +extern bool +lzma_lzma_lclppb_decode(lzma_options_lzma *options, uint8_t byte) +{ + if (byte > (4 * 5 + 4) * 9 + 8) + return true; + + // See the file format specification to understand this. + options->pb = byte / (9 * 5); + byte -= options->pb * 9 * 5; + options->lp = byte / 9; + options->lc = byte - options->lp * 9; + + return options->lc + options->lp > LZMA_LCLP_MAX; +} + + +extern uint64_t +lzma_lzma_decoder_memusage_nocheck(const void *options) +{ + const lzma_options_lzma *const opt = options; + return sizeof(lzma_lzma1_decoder) + + lzma_lz_decoder_memusage(opt->dict_size); +} + + +extern uint64_t +lzma_lzma_decoder_memusage(const void *options) +{ + if (!is_lclppb_valid(options)) + return UINT64_MAX; + + return lzma_lzma_decoder_memusage_nocheck(options); +} + + +extern lzma_ret +lzma_lzma_props_decode(void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size) +{ + if (props_size != 5) + return LZMA_OPTIONS_ERROR; + + lzma_options_lzma *opt + = lzma_alloc(sizeof(lzma_options_lzma), allocator); + if (opt == NULL) + return LZMA_MEM_ERROR; + + if (lzma_lzma_lclppb_decode(opt, props[0])) + goto error; + + // All dictionary sizes are accepted, including zero. LZ decoder + // will automatically use a dictionary at least a few KiB even if + // a smaller dictionary is requested. + opt->dict_size = read32le(props + 1); + + opt->preset_dict = NULL; + opt->preset_dict_size = 0; + + *options = opt; + + return LZMA_OK; + +error: + lzma_free(opt, allocator); + return LZMA_OPTIONS_ERROR; +} diff --git a/src/liblzma/lzma/lzma_decoder.h b/src/liblzma/lzma/lzma_decoder.h new file mode 100644 index 0000000..1427bc2 --- /dev/null +++ b/src/liblzma/lzma/lzma_decoder.h @@ -0,0 +1,53 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_decoder.h +/// \brief LZMA decoder API +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZMA_DECODER_H +#define LZMA_LZMA_DECODER_H + +#include "common.h" + + +/// Allocates and initializes LZMA decoder +extern lzma_ret lzma_lzma_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern uint64_t lzma_lzma_decoder_memusage(const void *options); + +extern lzma_ret lzma_lzma_props_decode( + void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size); + + +/// \brief Decodes the LZMA Properties byte (lc/lp/pb) +/// +/// \return true if error occurred, false on success +/// +extern bool lzma_lzma_lclppb_decode( + lzma_options_lzma *options, uint8_t byte); + + +#ifdef LZMA_LZ_DECODER_H +/// Allocate and setup function pointers only. This is used by LZMA1 and +/// LZMA2 decoders. +extern lzma_ret lzma_lzma_decoder_create( + lzma_lz_decoder *lz, const lzma_allocator *allocator, + const lzma_options_lzma *opt, lzma_lz_options *lz_options); + +/// Gets memory usage without validating lc/lp/pb. This is used by LZMA2 +/// decoder, because raw LZMA2 decoding doesn't need lc/lp/pb. +extern uint64_t lzma_lzma_decoder_memusage_nocheck(const void *options); + +#endif + +#endif diff --git a/src/liblzma/lzma/lzma_encoder.c b/src/liblzma/lzma/lzma_encoder.c new file mode 100644 index 0000000..dc62f44 --- /dev/null +++ b/src/liblzma/lzma/lzma_encoder.c @@ -0,0 +1,784 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_encoder.c +/// \brief LZMA encoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lzma2_encoder.h" +#include "lzma_encoder_private.h" +#include "fastpos.h" + + +///////////// +// Literal // +///////////// + +static inline void +literal_matched(lzma_range_encoder *rc, probability *subcoder, + uint32_t match_byte, uint32_t symbol) +{ + uint32_t offset = 0x100; + symbol += UINT32_C(1) << 8; + + do { + match_byte <<= 1; + const uint32_t match_bit = match_byte & offset; + const uint32_t subcoder_index + = offset + match_bit + (symbol >> 8); + const uint32_t bit = (symbol >> 7) & 1; + rc_bit(rc, &subcoder[subcoder_index], bit); + + symbol <<= 1; + offset &= ~(match_byte ^ symbol); + + } while (symbol < (UINT32_C(1) << 16)); +} + + +static inline void +literal(lzma_lzma1_encoder *coder, lzma_mf *mf, uint32_t position) +{ + // Locate the literal byte to be encoded and the subcoder. + const uint8_t cur_byte = mf->buffer[ + mf->read_pos - mf->read_ahead]; + probability *subcoder = literal_subcoder(coder->literal, + coder->literal_context_bits, coder->literal_pos_mask, + position, mf->buffer[mf->read_pos - mf->read_ahead - 1]); + + if (is_literal_state(coder->state)) { + // Previous LZMA-symbol was a literal. Encode a normal + // literal without a match byte. + rc_bittree(&coder->rc, subcoder, 8, cur_byte); + } else { + // Previous LZMA-symbol was a match. Use the last byte of + // the match as a "match byte". That is, compare the bits + // of the current literal and the match byte. + const uint8_t match_byte = mf->buffer[ + mf->read_pos - coder->reps[0] - 1 + - mf->read_ahead]; + literal_matched(&coder->rc, subcoder, match_byte, cur_byte); + } + + update_literal(coder->state); +} + + +////////////////// +// Match length // +////////////////// + +static void +length_update_prices(lzma_length_encoder *lc, const uint32_t pos_state) +{ + const uint32_t table_size = lc->table_size; + lc->counters[pos_state] = table_size; + + const uint32_t a0 = rc_bit_0_price(lc->choice); + const uint32_t a1 = rc_bit_1_price(lc->choice); + const uint32_t b0 = a1 + rc_bit_0_price(lc->choice2); + const uint32_t b1 = a1 + rc_bit_1_price(lc->choice2); + uint32_t *const prices = lc->prices[pos_state]; + + uint32_t i; + for (i = 0; i < table_size && i < LEN_LOW_SYMBOLS; ++i) + prices[i] = a0 + rc_bittree_price(lc->low[pos_state], + LEN_LOW_BITS, i); + + for (; i < table_size && i < LEN_LOW_SYMBOLS + LEN_MID_SYMBOLS; ++i) + prices[i] = b0 + rc_bittree_price(lc->mid[pos_state], + LEN_MID_BITS, i - LEN_LOW_SYMBOLS); + + for (; i < table_size; ++i) + prices[i] = b1 + rc_bittree_price(lc->high, LEN_HIGH_BITS, + i - LEN_LOW_SYMBOLS - LEN_MID_SYMBOLS); + + return; +} + + +static inline void +length(lzma_range_encoder *rc, lzma_length_encoder *lc, + const uint32_t pos_state, uint32_t len, const bool fast_mode) +{ + assert(len <= MATCH_LEN_MAX); + len -= MATCH_LEN_MIN; + + if (len < LEN_LOW_SYMBOLS) { + rc_bit(rc, &lc->choice, 0); + rc_bittree(rc, lc->low[pos_state], LEN_LOW_BITS, len); + } else { + rc_bit(rc, &lc->choice, 1); + len -= LEN_LOW_SYMBOLS; + + if (len < LEN_MID_SYMBOLS) { + rc_bit(rc, &lc->choice2, 0); + rc_bittree(rc, lc->mid[pos_state], LEN_MID_BITS, len); + } else { + rc_bit(rc, &lc->choice2, 1); + len -= LEN_MID_SYMBOLS; + rc_bittree(rc, lc->high, LEN_HIGH_BITS, len); + } + } + + // Only getoptimum uses the prices so don't update the table when + // in fast mode. + if (!fast_mode) + if (--lc->counters[pos_state] == 0) + length_update_prices(lc, pos_state); +} + + +/////////// +// Match // +/////////// + +static inline void +match(lzma_lzma1_encoder *coder, const uint32_t pos_state, + const uint32_t distance, const uint32_t len) +{ + update_match(coder->state); + + length(&coder->rc, &coder->match_len_encoder, pos_state, len, + coder->fast_mode); + + const uint32_t dist_slot = get_dist_slot(distance); + const uint32_t dist_state = get_dist_state(len); + rc_bittree(&coder->rc, coder->dist_slot[dist_state], + DIST_SLOT_BITS, dist_slot); + + if (dist_slot >= DIST_MODEL_START) { + const uint32_t footer_bits = (dist_slot >> 1) - 1; + const uint32_t base = (2 | (dist_slot & 1)) << footer_bits; + const uint32_t dist_reduced = distance - base; + + if (dist_slot < DIST_MODEL_END) { + // Careful here: base - dist_slot - 1 can be -1, but + // rc_bittree_reverse starts at probs[1], not probs[0]. + rc_bittree_reverse(&coder->rc, + coder->dist_special + base - dist_slot - 1, + footer_bits, dist_reduced); + } else { + rc_direct(&coder->rc, dist_reduced >> ALIGN_BITS, + footer_bits - ALIGN_BITS); + rc_bittree_reverse( + &coder->rc, coder->dist_align, + ALIGN_BITS, dist_reduced & ALIGN_MASK); + ++coder->align_price_count; + } + } + + coder->reps[3] = coder->reps[2]; + coder->reps[2] = coder->reps[1]; + coder->reps[1] = coder->reps[0]; + coder->reps[0] = distance; + ++coder->match_price_count; +} + + +//////////////////// +// Repeated match // +//////////////////// + +static inline void +rep_match(lzma_lzma1_encoder *coder, const uint32_t pos_state, + const uint32_t rep, const uint32_t len) +{ + if (rep == 0) { + rc_bit(&coder->rc, &coder->is_rep0[coder->state], 0); + rc_bit(&coder->rc, + &coder->is_rep0_long[coder->state][pos_state], + len != 1); + } else { + const uint32_t distance = coder->reps[rep]; + rc_bit(&coder->rc, &coder->is_rep0[coder->state], 1); + + if (rep == 1) { + rc_bit(&coder->rc, &coder->is_rep1[coder->state], 0); + } else { + rc_bit(&coder->rc, &coder->is_rep1[coder->state], 1); + rc_bit(&coder->rc, &coder->is_rep2[coder->state], + rep - 2); + + if (rep == 3) + coder->reps[3] = coder->reps[2]; + + coder->reps[2] = coder->reps[1]; + } + + coder->reps[1] = coder->reps[0]; + coder->reps[0] = distance; + } + + if (len == 1) { + update_short_rep(coder->state); + } else { + length(&coder->rc, &coder->rep_len_encoder, pos_state, len, + coder->fast_mode); + update_long_rep(coder->state); + } +} + + +////////// +// Main // +////////// + +static void +encode_symbol(lzma_lzma1_encoder *coder, lzma_mf *mf, + uint32_t back, uint32_t len, uint32_t position) +{ + const uint32_t pos_state = position & coder->pos_mask; + + if (back == UINT32_MAX) { + // Literal i.e. eight-bit byte + assert(len == 1); + rc_bit(&coder->rc, + &coder->is_match[coder->state][pos_state], 0); + literal(coder, mf, position); + } else { + // Some type of match + rc_bit(&coder->rc, + &coder->is_match[coder->state][pos_state], 1); + + if (back < REPS) { + // It's a repeated match i.e. the same distance + // has been used earlier. + rc_bit(&coder->rc, &coder->is_rep[coder->state], 1); + rep_match(coder, pos_state, back, len); + } else { + // Normal match + rc_bit(&coder->rc, &coder->is_rep[coder->state], 0); + match(coder, pos_state, back - REPS, len); + } + } + + assert(mf->read_ahead >= len); + mf->read_ahead -= len; +} + + +static bool +encode_init(lzma_lzma1_encoder *coder, lzma_mf *mf) +{ + assert(mf_position(mf) == 0); + assert(coder->uncomp_size == 0); + + if (mf->read_pos == mf->read_limit) { + if (mf->action == LZMA_RUN) + return false; // We cannot do anything. + + // We are finishing (we cannot get here when flushing). + assert(mf->write_pos == mf->read_pos); + assert(mf->action == LZMA_FINISH); + } else { + // Do the actual initialization. The first LZMA symbol must + // always be a literal. + mf_skip(mf, 1); + mf->read_ahead = 0; + rc_bit(&coder->rc, &coder->is_match[0][0], 0); + rc_bittree(&coder->rc, coder->literal[0], 8, mf->buffer[0]); + ++coder->uncomp_size; + } + + // Initialization is done (except if empty file). + coder->is_initialized = true; + + return true; +} + + +static void +encode_eopm(lzma_lzma1_encoder *coder, uint32_t position) +{ + const uint32_t pos_state = position & coder->pos_mask; + rc_bit(&coder->rc, &coder->is_match[coder->state][pos_state], 1); + rc_bit(&coder->rc, &coder->is_rep[coder->state], 0); + match(coder, pos_state, UINT32_MAX, MATCH_LEN_MIN); +} + + +/// Number of bytes that a single encoding loop in lzma_lzma_encode() can +/// consume from the dictionary. This limit comes from lzma_lzma_optimum() +/// and may need to be updated if that function is significantly modified. +#define LOOP_INPUT_MAX (OPTS + 1) + + +extern lzma_ret +lzma_lzma_encode(lzma_lzma1_encoder *restrict coder, lzma_mf *restrict mf, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size, uint32_t limit) +{ + // Initialize the stream if no data has been encoded yet. + if (!coder->is_initialized && !encode_init(coder, mf)) + return LZMA_OK; + + // Encode pending output bytes from the range encoder. + // At the start of the stream, encode_init() encodes one literal. + // Later there can be pending output only with LZMA1 because LZMA2 + // ensures that there is always enough output space. Thus when using + // LZMA2, rc_encode() calls in this function will always return false. + if (rc_encode(&coder->rc, out, out_pos, out_size)) { + // We don't get here with LZMA2. + assert(limit == UINT32_MAX); + return LZMA_OK; + } + + // If the range encoder was flushed in an earlier call to this + // function but there wasn't enough output buffer space, those + // bytes would have now been encoded by the above rc_encode() call + // and the stream has now been finished. This can only happen with + // LZMA1 as LZMA2 always provides enough output buffer space. + if (coder->is_flushed) { + assert(limit == UINT32_MAX); + return LZMA_STREAM_END; + } + + while (true) { + // With LZMA2 we need to take care that compressed size of + // a chunk doesn't get too big. + // FIXME? Check if this could be improved. + if (limit != UINT32_MAX + && (mf->read_pos - mf->read_ahead >= limit + || *out_pos + rc_pending(&coder->rc) + >= LZMA2_CHUNK_MAX + - LOOP_INPUT_MAX)) + break; + + // Check that there is some input to process. + if (mf->read_pos >= mf->read_limit) { + if (mf->action == LZMA_RUN) + return LZMA_OK; + + if (mf->read_ahead == 0) + break; + } + + // Get optimal match (repeat position and length). + // Value ranges for pos: + // - [0, REPS): repeated match + // - [REPS, UINT32_MAX): + // match at (pos - REPS) + // - UINT32_MAX: not a match but a literal + // Value ranges for len: + // - [MATCH_LEN_MIN, MATCH_LEN_MAX] + uint32_t len; + uint32_t back; + + if (coder->fast_mode) + lzma_lzma_optimum_fast(coder, mf, &back, &len); + else + lzma_lzma_optimum_normal(coder, mf, &back, &len, + (uint32_t)(coder->uncomp_size)); + + encode_symbol(coder, mf, back, len, + (uint32_t)(coder->uncomp_size)); + + // If output size limiting is active (out_limit != 0), check + // if encoding this LZMA symbol would make the output size + // exceed the specified limit. + if (coder->out_limit != 0 && rc_encode_dummy( + &coder->rc, coder->out_limit)) { + // The most recent LZMA symbol would make the output + // too big. Throw it away. + rc_forget(&coder->rc); + + // FIXME: Tell the LZ layer to not read more input as + // it would be waste of time. This doesn't matter if + // output-size-limited encoding is done with a single + // call though. + + break; + } + + // This symbol will be encoded so update the uncompressed size. + coder->uncomp_size += len; + + // Encode the LZMA symbol. + if (rc_encode(&coder->rc, out, out_pos, out_size)) { + // Once again, this can only happen with LZMA1. + assert(limit == UINT32_MAX); + return LZMA_OK; + } + } + + // Make the uncompressed size available to the application. + if (coder->uncomp_size_ptr != NULL) + *coder->uncomp_size_ptr = coder->uncomp_size; + + // LZMA2 doesn't use EOPM at LZMA level. + // + // Plain LZMA streams without EOPM aren't supported except when + // output size limiting is enabled. + if (coder->use_eopm) + encode_eopm(coder, (uint32_t)(coder->uncomp_size)); + + // Flush the remaining bytes from the range encoder. + rc_flush(&coder->rc); + + // Copy the remaining bytes to the output buffer. If there + // isn't enough output space, we will copy out the remaining + // bytes on the next call to this function. + if (rc_encode(&coder->rc, out, out_pos, out_size)) { + // This cannot happen with LZMA2. + assert(limit == UINT32_MAX); + + coder->is_flushed = true; + return LZMA_OK; + } + + return LZMA_STREAM_END; +} + + +static lzma_ret +lzma_encode(void *coder, lzma_mf *restrict mf, + uint8_t *restrict out, size_t *restrict out_pos, + size_t out_size) +{ + // Plain LZMA has no support for sync-flushing. + if (unlikely(mf->action == LZMA_SYNC_FLUSH)) + return LZMA_OPTIONS_ERROR; + + return lzma_lzma_encode(coder, mf, out, out_pos, out_size, UINT32_MAX); +} + + +static lzma_ret +lzma_lzma_set_out_limit( + void *coder_ptr, uint64_t *uncomp_size, uint64_t out_limit) +{ + // Minimum output size is 5 bytes but that cannot hold any output + // so we use 6 bytes. + if (out_limit < 6) + return LZMA_BUF_ERROR; + + lzma_lzma1_encoder *coder = coder_ptr; + coder->out_limit = out_limit; + coder->uncomp_size_ptr = uncomp_size; + coder->use_eopm = false; + return LZMA_OK; +} + + +//////////////////// +// Initialization // +//////////////////// + +static bool +is_options_valid(const lzma_options_lzma *options) +{ + // Validate some of the options. LZ encoder validates nice_len too + // but we need a valid value here earlier. + return is_lclppb_valid(options) + && options->nice_len >= MATCH_LEN_MIN + && options->nice_len <= MATCH_LEN_MAX + && (options->mode == LZMA_MODE_FAST + || options->mode == LZMA_MODE_NORMAL); +} + + +static void +set_lz_options(lzma_lz_options *lz_options, const lzma_options_lzma *options) +{ + // LZ encoder initialization does the validation for these so we + // don't need to validate here. + lz_options->before_size = OPTS; + lz_options->dict_size = options->dict_size; + lz_options->after_size = LOOP_INPUT_MAX; + lz_options->match_len_max = MATCH_LEN_MAX; + lz_options->nice_len = my_max(mf_get_hash_bytes(options->mf), + options->nice_len); + lz_options->match_finder = options->mf; + lz_options->depth = options->depth; + lz_options->preset_dict = options->preset_dict; + lz_options->preset_dict_size = options->preset_dict_size; + return; +} + + +static void +length_encoder_reset(lzma_length_encoder *lencoder, + const uint32_t num_pos_states, const bool fast_mode) +{ + bit_reset(lencoder->choice); + bit_reset(lencoder->choice2); + + for (size_t pos_state = 0; pos_state < num_pos_states; ++pos_state) { + bittree_reset(lencoder->low[pos_state], LEN_LOW_BITS); + bittree_reset(lencoder->mid[pos_state], LEN_MID_BITS); + } + + bittree_reset(lencoder->high, LEN_HIGH_BITS); + + if (!fast_mode) + for (uint32_t pos_state = 0; pos_state < num_pos_states; + ++pos_state) + length_update_prices(lencoder, pos_state); + + return; +} + + +extern lzma_ret +lzma_lzma_encoder_reset(lzma_lzma1_encoder *coder, + const lzma_options_lzma *options) +{ + if (!is_options_valid(options)) + return LZMA_OPTIONS_ERROR; + + coder->pos_mask = (1U << options->pb) - 1; + coder->literal_context_bits = options->lc; + coder->literal_pos_mask = (1U << options->lp) - 1; + + // Range coder + rc_reset(&coder->rc); + + // State + coder->state = STATE_LIT_LIT; + for (size_t i = 0; i < REPS; ++i) + coder->reps[i] = 0; + + literal_init(coder->literal, options->lc, options->lp); + + // Bit encoders + for (size_t i = 0; i < STATES; ++i) { + for (size_t j = 0; j <= coder->pos_mask; ++j) { + bit_reset(coder->is_match[i][j]); + bit_reset(coder->is_rep0_long[i][j]); + } + + bit_reset(coder->is_rep[i]); + bit_reset(coder->is_rep0[i]); + bit_reset(coder->is_rep1[i]); + bit_reset(coder->is_rep2[i]); + } + + for (size_t i = 0; i < FULL_DISTANCES - DIST_MODEL_END; ++i) + bit_reset(coder->dist_special[i]); + + // Bit tree encoders + for (size_t i = 0; i < DIST_STATES; ++i) + bittree_reset(coder->dist_slot[i], DIST_SLOT_BITS); + + bittree_reset(coder->dist_align, ALIGN_BITS); + + // Length encoders + length_encoder_reset(&coder->match_len_encoder, + 1U << options->pb, coder->fast_mode); + + length_encoder_reset(&coder->rep_len_encoder, + 1U << options->pb, coder->fast_mode); + + // Price counts are incremented every time appropriate probabilities + // are changed. price counts are set to zero when the price tables + // are updated, which is done when the appropriate price counts have + // big enough value, and lzma_mf.read_ahead == 0 which happens at + // least every OPTS (a few thousand) possible price count increments. + // + // By resetting price counts to UINT32_MAX / 2, we make sure that the + // price tables will be initialized before they will be used (since + // the value is definitely big enough), and that it is OK to increment + // price counts without risk of integer overflow (since UINT32_MAX / 2 + // is small enough). The current code doesn't increment price counts + // before initializing price tables, but it maybe done in future if + // we add support for saving the state between LZMA2 chunks. + coder->match_price_count = UINT32_MAX / 2; + coder->align_price_count = UINT32_MAX / 2; + + coder->opts_end_index = 0; + coder->opts_current_index = 0; + + return LZMA_OK; +} + + +extern lzma_ret +lzma_lzma_encoder_create(void **coder_ptr, const lzma_allocator *allocator, + lzma_vli id, const lzma_options_lzma *options, + lzma_lz_options *lz_options) +{ + assert(id == LZMA_FILTER_LZMA1 || id == LZMA_FILTER_LZMA1EXT + || id == LZMA_FILTER_LZMA2); + + // Allocate lzma_lzma1_encoder if it wasn't already allocated. + if (*coder_ptr == NULL) { + *coder_ptr = lzma_alloc(sizeof(lzma_lzma1_encoder), allocator); + if (*coder_ptr == NULL) + return LZMA_MEM_ERROR; + } + + lzma_lzma1_encoder *coder = *coder_ptr; + + // Set compression mode. Note that we haven't validated the options + // yet. Invalid options will get rejected by lzma_lzma_encoder_reset() + // call at the end of this function. + switch (options->mode) { + case LZMA_MODE_FAST: + coder->fast_mode = true; + break; + + case LZMA_MODE_NORMAL: { + coder->fast_mode = false; + + // Set dist_table_size. + // Round the dictionary size up to next 2^n. + // + // Currently the maximum encoder dictionary size + // is 1.5 GiB due to lz_encoder.c and here we need + // to be below 2 GiB to make the rounded up value + // fit in an uint32_t and avoid an infite while-loop + // (and undefined behavior due to a too large shift). + // So do the same check as in LZ encoder, + // limiting to 1.5 GiB. + if (options->dict_size > (UINT32_C(1) << 30) + + (UINT32_C(1) << 29)) + return LZMA_OPTIONS_ERROR; + + uint32_t log_size = 0; + while ((UINT32_C(1) << log_size) < options->dict_size) + ++log_size; + + coder->dist_table_size = log_size * 2; + + // Length encoders' price table size + const uint32_t nice_len = my_max( + mf_get_hash_bytes(options->mf), + options->nice_len); + + coder->match_len_encoder.table_size + = nice_len + 1 - MATCH_LEN_MIN; + coder->rep_len_encoder.table_size + = nice_len + 1 - MATCH_LEN_MIN; + break; + } + + default: + return LZMA_OPTIONS_ERROR; + } + + // We don't need to write the first byte as literal if there is + // a non-empty preset dictionary. encode_init() wouldn't even work + // if there is a non-empty preset dictionary, because encode_init() + // assumes that position is zero and previous byte is also zero. + coder->is_initialized = options->preset_dict != NULL + && options->preset_dict_size > 0; + coder->is_flushed = false; + coder->uncomp_size = 0; + coder->uncomp_size_ptr = NULL; + + // Output size limitting is disabled by default. + coder->out_limit = 0; + + // Determine if end marker is wanted: + // - It is never used with LZMA2. + // - It is always used with LZMA_FILTER_LZMA1 (unless + // lzma_lzma_set_out_limit() is called later). + // - LZMA_FILTER_LZMA1EXT has a flag for it in the options. + coder->use_eopm = (id == LZMA_FILTER_LZMA1); + if (id == LZMA_FILTER_LZMA1EXT) { + // Check if unsupported flags are present. + if (options->ext_flags & ~LZMA_LZMA1EXT_ALLOW_EOPM) + return LZMA_OPTIONS_ERROR; + + coder->use_eopm = (options->ext_flags + & LZMA_LZMA1EXT_ALLOW_EOPM) != 0; + + // TODO? As long as there are no filters that change the size + // of the data, it is enough to look at lzma_stream.total_in + // after encoding has been finished to know the uncompressed + // size of the LZMA1 stream. But in the future there could be + // filters that change the size of the data and then total_in + // doesn't work as the LZMA1 stream size might be different + // due to another filter in the chain. The problem is simple + // to solve: Add another flag to ext_flags and then set + // coder->uncomp_size_ptr to the address stored in + // lzma_options_lzma.reserved_ptr2 (or _ptr1). + } + + set_lz_options(lz_options, options); + + return lzma_lzma_encoder_reset(coder, options); +} + + +static lzma_ret +lzma_encoder_init(lzma_lz_encoder *lz, const lzma_allocator *allocator, + lzma_vli id, const void *options, lzma_lz_options *lz_options) +{ + lz->code = &lzma_encode; + lz->set_out_limit = &lzma_lzma_set_out_limit; + return lzma_lzma_encoder_create( + &lz->coder, allocator, id, options, lz_options); +} + + +extern lzma_ret +lzma_lzma_encoder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return lzma_lz_encoder_init( + next, allocator, filters, &lzma_encoder_init); +} + + +extern uint64_t +lzma_lzma_encoder_memusage(const void *options) +{ + if (!is_options_valid(options)) + return UINT64_MAX; + + lzma_lz_options lz_options; + set_lz_options(&lz_options, options); + + const uint64_t lz_memusage = lzma_lz_encoder_memusage(&lz_options); + if (lz_memusage == UINT64_MAX) + return UINT64_MAX; + + return (uint64_t)(sizeof(lzma_lzma1_encoder)) + lz_memusage; +} + + +extern bool +lzma_lzma_lclppb_encode(const lzma_options_lzma *options, uint8_t *byte) +{ + if (!is_lclppb_valid(options)) + return true; + + *byte = (options->pb * 5 + options->lp) * 9 + options->lc; + assert(*byte <= (4 * 5 + 4) * 9 + 8); + + return false; +} + + +#ifdef HAVE_ENCODER_LZMA1 +extern lzma_ret +lzma_lzma_props_encode(const void *options, uint8_t *out) +{ + if (options == NULL) + return LZMA_PROG_ERROR; + + const lzma_options_lzma *const opt = options; + + if (lzma_lzma_lclppb_encode(opt, out)) + return LZMA_PROG_ERROR; + + write32le(out + 1, opt->dict_size); + + return LZMA_OK; +} +#endif + + +extern LZMA_API(lzma_bool) +lzma_mode_is_supported(lzma_mode mode) +{ + return mode == LZMA_MODE_FAST || mode == LZMA_MODE_NORMAL; +} diff --git a/src/liblzma/lzma/lzma_encoder.h b/src/liblzma/lzma/lzma_encoder.h new file mode 100644 index 0000000..84d8c91 --- /dev/null +++ b/src/liblzma/lzma/lzma_encoder.h @@ -0,0 +1,59 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_encoder.h +/// \brief LZMA encoder API +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZMA_ENCODER_H +#define LZMA_LZMA_ENCODER_H + +#include "common.h" + + +typedef struct lzma_lzma1_encoder_s lzma_lzma1_encoder; + + +extern lzma_ret lzma_lzma_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + + +extern uint64_t lzma_lzma_encoder_memusage(const void *options); + +extern lzma_ret lzma_lzma_props_encode(const void *options, uint8_t *out); + + +/// Encodes lc/lp/pb into one byte. Returns false on success and true on error. +extern bool lzma_lzma_lclppb_encode( + const lzma_options_lzma *options, uint8_t *byte); + + +#ifdef LZMA_LZ_ENCODER_H + +/// Initializes raw LZMA encoder; this is used by LZMA2. +extern lzma_ret lzma_lzma_encoder_create( + void **coder_ptr, const lzma_allocator *allocator, + lzma_vli id, const lzma_options_lzma *options, + lzma_lz_options *lz_options); + + +/// Resets an already initialized LZMA encoder; this is used by LZMA2. +extern lzma_ret lzma_lzma_encoder_reset( + lzma_lzma1_encoder *coder, const lzma_options_lzma *options); + + +extern lzma_ret lzma_lzma_encode(lzma_lzma1_encoder *restrict coder, + lzma_mf *restrict mf, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, + uint32_t read_limit); + +#endif + +#endif diff --git a/src/liblzma/lzma/lzma_encoder_optimum_fast.c b/src/liblzma/lzma/lzma_encoder_optimum_fast.c new file mode 100644 index 0000000..6c53d2b --- /dev/null +++ b/src/liblzma/lzma/lzma_encoder_optimum_fast.c @@ -0,0 +1,170 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_encoder_optimum_fast.c +// +// Author: Igor Pavlov +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lzma_encoder_private.h" +#include "memcmplen.h" + + +#define change_pair(small_dist, big_dist) \ + (((big_dist) >> 7) > (small_dist)) + + +extern void +lzma_lzma_optimum_fast(lzma_lzma1_encoder *restrict coder, + lzma_mf *restrict mf, + uint32_t *restrict back_res, uint32_t *restrict len_res) +{ + const uint32_t nice_len = mf->nice_len; + + uint32_t len_main; + uint32_t matches_count; + if (mf->read_ahead == 0) { + len_main = mf_find(mf, &matches_count, coder->matches); + } else { + assert(mf->read_ahead == 1); + len_main = coder->longest_match_length; + matches_count = coder->matches_count; + } + + const uint8_t *buf = mf_ptr(mf) - 1; + const uint32_t buf_avail = my_min(mf_avail(mf) + 1, MATCH_LEN_MAX); + + if (buf_avail < 2) { + // There's not enough input left to encode a match. + *back_res = UINT32_MAX; + *len_res = 1; + return; + } + + // Look for repeated matches; scan the previous four match distances + uint32_t rep_len = 0; + uint32_t rep_index = 0; + + for (uint32_t i = 0; i < REPS; ++i) { + // Pointer to the beginning of the match candidate + const uint8_t *const buf_back = buf - coder->reps[i] - 1; + + // If the first two bytes (2 == MATCH_LEN_MIN) do not match, + // this rep is not useful. + if (not_equal_16(buf, buf_back)) + continue; + + // The first two bytes matched. + // Calculate the length of the match. + const uint32_t len = lzma_memcmplen( + buf, buf_back, 2, buf_avail); + + // If we have found a repeated match that is at least + // nice_len long, return it immediately. + if (len >= nice_len) { + *back_res = i; + *len_res = len; + mf_skip(mf, len - 1); + return; + } + + if (len > rep_len) { + rep_index = i; + rep_len = len; + } + } + + // We didn't find a long enough repeated match. Encode it as a normal + // match if the match length is at least nice_len. + if (len_main >= nice_len) { + *back_res = coder->matches[matches_count - 1].dist + REPS; + *len_res = len_main; + mf_skip(mf, len_main - 1); + return; + } + + uint32_t back_main = 0; + if (len_main >= 2) { + back_main = coder->matches[matches_count - 1].dist; + + while (matches_count > 1 && len_main == + coder->matches[matches_count - 2].len + 1) { + if (!change_pair(coder->matches[ + matches_count - 2].dist, + back_main)) + break; + + --matches_count; + len_main = coder->matches[matches_count - 1].len; + back_main = coder->matches[matches_count - 1].dist; + } + + if (len_main == 2 && back_main >= 0x80) + len_main = 1; + } + + if (rep_len >= 2) { + if (rep_len + 1 >= len_main + || (rep_len + 2 >= len_main + && back_main > (UINT32_C(1) << 9)) + || (rep_len + 3 >= len_main + && back_main > (UINT32_C(1) << 15))) { + *back_res = rep_index; + *len_res = rep_len; + mf_skip(mf, rep_len - 1); + return; + } + } + + if (len_main < 2 || buf_avail <= 2) { + *back_res = UINT32_MAX; + *len_res = 1; + return; + } + + // Get the matches for the next byte. If we find a better match, + // the current byte is encoded as a literal. + coder->longest_match_length = mf_find(mf, + &coder->matches_count, coder->matches); + + if (coder->longest_match_length >= 2) { + const uint32_t new_dist = coder->matches[ + coder->matches_count - 1].dist; + + if ((coder->longest_match_length >= len_main + && new_dist < back_main) + || (coder->longest_match_length == len_main + 1 + && !change_pair(back_main, new_dist)) + || (coder->longest_match_length > len_main + 1) + || (coder->longest_match_length + 1 >= len_main + && len_main >= 3 + && change_pair(new_dist, back_main))) { + *back_res = UINT32_MAX; + *len_res = 1; + return; + } + } + + // In contrast to LZMA SDK, dictionary could not have been moved + // between mf_find() calls, thus it is safe to just increment + // the old buf pointer instead of recalculating it with mf_ptr(). + ++buf; + + const uint32_t limit = my_max(2, len_main - 1); + + for (uint32_t i = 0; i < REPS; ++i) { + if (memcmp(buf, buf - coder->reps[i] - 1, limit) == 0) { + *back_res = UINT32_MAX; + *len_res = 1; + return; + } + } + + *back_res = back_main + REPS; + *len_res = len_main; + mf_skip(mf, len_main - 2); + return; +} diff --git a/src/liblzma/lzma/lzma_encoder_optimum_normal.c b/src/liblzma/lzma/lzma_encoder_optimum_normal.c new file mode 100644 index 0000000..101c8d4 --- /dev/null +++ b/src/liblzma/lzma/lzma_encoder_optimum_normal.c @@ -0,0 +1,859 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_encoder_optimum_normal.c +// +// Author: Igor Pavlov +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "lzma_encoder_private.h" +#include "fastpos.h" +#include "memcmplen.h" + + +//////////// +// Prices // +//////////// + +static uint32_t +get_literal_price(const lzma_lzma1_encoder *const coder, const uint32_t pos, + const uint32_t prev_byte, const bool match_mode, + uint32_t match_byte, uint32_t symbol) +{ + const probability *const subcoder = literal_subcoder(coder->literal, + coder->literal_context_bits, coder->literal_pos_mask, + pos, prev_byte); + + uint32_t price = 0; + + if (!match_mode) { + price = rc_bittree_price(subcoder, 8, symbol); + } else { + uint32_t offset = 0x100; + symbol += UINT32_C(1) << 8; + + do { + match_byte <<= 1; + + const uint32_t match_bit = match_byte & offset; + const uint32_t subcoder_index + = offset + match_bit + (symbol >> 8); + const uint32_t bit = (symbol >> 7) & 1; + price += rc_bit_price(subcoder[subcoder_index], bit); + + symbol <<= 1; + offset &= ~(match_byte ^ symbol); + + } while (symbol < (UINT32_C(1) << 16)); + } + + return price; +} + + +static inline uint32_t +get_len_price(const lzma_length_encoder *const lencoder, + const uint32_t len, const uint32_t pos_state) +{ + // NOTE: Unlike the other price tables, length prices are updated + // in lzma_encoder.c + return lencoder->prices[pos_state][len - MATCH_LEN_MIN]; +} + + +static inline uint32_t +get_short_rep_price(const lzma_lzma1_encoder *const coder, + const lzma_lzma_state state, const uint32_t pos_state) +{ + return rc_bit_0_price(coder->is_rep0[state]) + + rc_bit_0_price(coder->is_rep0_long[state][pos_state]); +} + + +static inline uint32_t +get_pure_rep_price(const lzma_lzma1_encoder *const coder, const uint32_t rep_index, + const lzma_lzma_state state, uint32_t pos_state) +{ + uint32_t price; + + if (rep_index == 0) { + price = rc_bit_0_price(coder->is_rep0[state]); + price += rc_bit_1_price(coder->is_rep0_long[state][pos_state]); + } else { + price = rc_bit_1_price(coder->is_rep0[state]); + + if (rep_index == 1) { + price += rc_bit_0_price(coder->is_rep1[state]); + } else { + price += rc_bit_1_price(coder->is_rep1[state]); + price += rc_bit_price(coder->is_rep2[state], + rep_index - 2); + } + } + + return price; +} + + +static inline uint32_t +get_rep_price(const lzma_lzma1_encoder *const coder, const uint32_t rep_index, + const uint32_t len, const lzma_lzma_state state, + const uint32_t pos_state) +{ + return get_len_price(&coder->rep_len_encoder, len, pos_state) + + get_pure_rep_price(coder, rep_index, state, pos_state); +} + + +static inline uint32_t +get_dist_len_price(const lzma_lzma1_encoder *const coder, const uint32_t dist, + const uint32_t len, const uint32_t pos_state) +{ + const uint32_t dist_state = get_dist_state(len); + uint32_t price; + + if (dist < FULL_DISTANCES) { + price = coder->dist_prices[dist_state][dist]; + } else { + const uint32_t dist_slot = get_dist_slot_2(dist); + price = coder->dist_slot_prices[dist_state][dist_slot] + + coder->align_prices[dist & ALIGN_MASK]; + } + + price += get_len_price(&coder->match_len_encoder, len, pos_state); + + return price; +} + + +static void +fill_dist_prices(lzma_lzma1_encoder *coder) +{ + for (uint32_t dist_state = 0; dist_state < DIST_STATES; ++dist_state) { + + uint32_t *const dist_slot_prices + = coder->dist_slot_prices[dist_state]; + + // Price to encode the dist_slot. + for (uint32_t dist_slot = 0; + dist_slot < coder->dist_table_size; ++dist_slot) + dist_slot_prices[dist_slot] = rc_bittree_price( + coder->dist_slot[dist_state], + DIST_SLOT_BITS, dist_slot); + + // For matches with distance >= FULL_DISTANCES, add the price + // of the direct bits part of the match distance. (Align bits + // are handled by fill_align_prices()). + for (uint32_t dist_slot = DIST_MODEL_END; + dist_slot < coder->dist_table_size; + ++dist_slot) + dist_slot_prices[dist_slot] += rc_direct_price( + ((dist_slot >> 1) - 1) - ALIGN_BITS); + + // Distances in the range [0, 3] are fully encoded with + // dist_slot, so they are used for coder->dist_prices + // as is. + for (uint32_t i = 0; i < DIST_MODEL_START; ++i) + coder->dist_prices[dist_state][i] + = dist_slot_prices[i]; + } + + // Distances in the range [4, 127] depend on dist_slot and + // dist_special. We do this in a loop separate from the above + // loop to avoid redundant calls to get_dist_slot(). + for (uint32_t i = DIST_MODEL_START; i < FULL_DISTANCES; ++i) { + const uint32_t dist_slot = get_dist_slot(i); + const uint32_t footer_bits = ((dist_slot >> 1) - 1); + const uint32_t base = (2 | (dist_slot & 1)) << footer_bits; + const uint32_t price = rc_bittree_reverse_price( + coder->dist_special + base - dist_slot - 1, + footer_bits, i - base); + + for (uint32_t dist_state = 0; dist_state < DIST_STATES; + ++dist_state) + coder->dist_prices[dist_state][i] + = price + coder->dist_slot_prices[ + dist_state][dist_slot]; + } + + coder->match_price_count = 0; + return; +} + + +static void +fill_align_prices(lzma_lzma1_encoder *coder) +{ + for (uint32_t i = 0; i < ALIGN_SIZE; ++i) + coder->align_prices[i] = rc_bittree_reverse_price( + coder->dist_align, ALIGN_BITS, i); + + coder->align_price_count = 0; + return; +} + + +///////////// +// Optimal // +///////////// + +static inline void +make_literal(lzma_optimal *optimal) +{ + optimal->back_prev = UINT32_MAX; + optimal->prev_1_is_literal = false; +} + + +static inline void +make_short_rep(lzma_optimal *optimal) +{ + optimal->back_prev = 0; + optimal->prev_1_is_literal = false; +} + + +#define is_short_rep(optimal) \ + ((optimal).back_prev == 0) + + +static void +backward(lzma_lzma1_encoder *restrict coder, uint32_t *restrict len_res, + uint32_t *restrict back_res, uint32_t cur) +{ + coder->opts_end_index = cur; + + uint32_t pos_mem = coder->opts[cur].pos_prev; + uint32_t back_mem = coder->opts[cur].back_prev; + + do { + if (coder->opts[cur].prev_1_is_literal) { + make_literal(&coder->opts[pos_mem]); + coder->opts[pos_mem].pos_prev = pos_mem - 1; + + if (coder->opts[cur].prev_2) { + coder->opts[pos_mem - 1].prev_1_is_literal + = false; + coder->opts[pos_mem - 1].pos_prev + = coder->opts[cur].pos_prev_2; + coder->opts[pos_mem - 1].back_prev + = coder->opts[cur].back_prev_2; + } + } + + const uint32_t pos_prev = pos_mem; + const uint32_t back_cur = back_mem; + + back_mem = coder->opts[pos_prev].back_prev; + pos_mem = coder->opts[pos_prev].pos_prev; + + coder->opts[pos_prev].back_prev = back_cur; + coder->opts[pos_prev].pos_prev = cur; + cur = pos_prev; + + } while (cur != 0); + + coder->opts_current_index = coder->opts[0].pos_prev; + *len_res = coder->opts[0].pos_prev; + *back_res = coder->opts[0].back_prev; + + return; +} + + +////////// +// Main // +////////// + +static inline uint32_t +helper1(lzma_lzma1_encoder *restrict coder, lzma_mf *restrict mf, + uint32_t *restrict back_res, uint32_t *restrict len_res, + uint32_t position) +{ + const uint32_t nice_len = mf->nice_len; + + uint32_t len_main; + uint32_t matches_count; + + if (mf->read_ahead == 0) { + len_main = mf_find(mf, &matches_count, coder->matches); + } else { + assert(mf->read_ahead == 1); + len_main = coder->longest_match_length; + matches_count = coder->matches_count; + } + + const uint32_t buf_avail = my_min(mf_avail(mf) + 1, MATCH_LEN_MAX); + if (buf_avail < 2) { + *back_res = UINT32_MAX; + *len_res = 1; + return UINT32_MAX; + } + + const uint8_t *const buf = mf_ptr(mf) - 1; + + uint32_t rep_lens[REPS]; + uint32_t rep_max_index = 0; + + for (uint32_t i = 0; i < REPS; ++i) { + const uint8_t *const buf_back = buf - coder->reps[i] - 1; + + if (not_equal_16(buf, buf_back)) { + rep_lens[i] = 0; + continue; + } + + rep_lens[i] = lzma_memcmplen(buf, buf_back, 2, buf_avail); + + if (rep_lens[i] > rep_lens[rep_max_index]) + rep_max_index = i; + } + + if (rep_lens[rep_max_index] >= nice_len) { + *back_res = rep_max_index; + *len_res = rep_lens[rep_max_index]; + mf_skip(mf, *len_res - 1); + return UINT32_MAX; + } + + + if (len_main >= nice_len) { + *back_res = coder->matches[matches_count - 1].dist + REPS; + *len_res = len_main; + mf_skip(mf, len_main - 1); + return UINT32_MAX; + } + + const uint8_t current_byte = *buf; + const uint8_t match_byte = *(buf - coder->reps[0] - 1); + + if (len_main < 2 && current_byte != match_byte + && rep_lens[rep_max_index] < 2) { + *back_res = UINT32_MAX; + *len_res = 1; + return UINT32_MAX; + } + + coder->opts[0].state = coder->state; + + const uint32_t pos_state = position & coder->pos_mask; + + coder->opts[1].price = rc_bit_0_price( + coder->is_match[coder->state][pos_state]) + + get_literal_price(coder, position, buf[-1], + !is_literal_state(coder->state), + match_byte, current_byte); + + make_literal(&coder->opts[1]); + + const uint32_t match_price = rc_bit_1_price( + coder->is_match[coder->state][pos_state]); + const uint32_t rep_match_price = match_price + + rc_bit_1_price(coder->is_rep[coder->state]); + + if (match_byte == current_byte) { + const uint32_t short_rep_price = rep_match_price + + get_short_rep_price( + coder, coder->state, pos_state); + + if (short_rep_price < coder->opts[1].price) { + coder->opts[1].price = short_rep_price; + make_short_rep(&coder->opts[1]); + } + } + + const uint32_t len_end = my_max(len_main, rep_lens[rep_max_index]); + + if (len_end < 2) { + *back_res = coder->opts[1].back_prev; + *len_res = 1; + return UINT32_MAX; + } + + coder->opts[1].pos_prev = 0; + + for (uint32_t i = 0; i < REPS; ++i) + coder->opts[0].backs[i] = coder->reps[i]; + + uint32_t len = len_end; + do { + coder->opts[len].price = RC_INFINITY_PRICE; + } while (--len >= 2); + + + for (uint32_t i = 0; i < REPS; ++i) { + uint32_t rep_len = rep_lens[i]; + if (rep_len < 2) + continue; + + const uint32_t price = rep_match_price + get_pure_rep_price( + coder, i, coder->state, pos_state); + + do { + const uint32_t cur_and_len_price = price + + get_len_price( + &coder->rep_len_encoder, + rep_len, pos_state); + + if (cur_and_len_price < coder->opts[rep_len].price) { + coder->opts[rep_len].price = cur_and_len_price; + coder->opts[rep_len].pos_prev = 0; + coder->opts[rep_len].back_prev = i; + coder->opts[rep_len].prev_1_is_literal = false; + } + } while (--rep_len >= 2); + } + + + const uint32_t normal_match_price = match_price + + rc_bit_0_price(coder->is_rep[coder->state]); + + len = rep_lens[0] >= 2 ? rep_lens[0] + 1 : 2; + if (len <= len_main) { + uint32_t i = 0; + while (len > coder->matches[i].len) + ++i; + + for(; ; ++len) { + const uint32_t dist = coder->matches[i].dist; + const uint32_t cur_and_len_price = normal_match_price + + get_dist_len_price(coder, + dist, len, pos_state); + + if (cur_and_len_price < coder->opts[len].price) { + coder->opts[len].price = cur_and_len_price; + coder->opts[len].pos_prev = 0; + coder->opts[len].back_prev = dist + REPS; + coder->opts[len].prev_1_is_literal = false; + } + + if (len == coder->matches[i].len) + if (++i == matches_count) + break; + } + } + + return len_end; +} + + +static inline uint32_t +helper2(lzma_lzma1_encoder *coder, uint32_t *reps, const uint8_t *buf, + uint32_t len_end, uint32_t position, const uint32_t cur, + const uint32_t nice_len, const uint32_t buf_avail_full) +{ + uint32_t matches_count = coder->matches_count; + uint32_t new_len = coder->longest_match_length; + uint32_t pos_prev = coder->opts[cur].pos_prev; + lzma_lzma_state state; + + if (coder->opts[cur].prev_1_is_literal) { + --pos_prev; + + if (coder->opts[cur].prev_2) { + state = coder->opts[coder->opts[cur].pos_prev_2].state; + + if (coder->opts[cur].back_prev_2 < REPS) + update_long_rep(state); + else + update_match(state); + + } else { + state = coder->opts[pos_prev].state; + } + + update_literal(state); + + } else { + state = coder->opts[pos_prev].state; + } + + if (pos_prev == cur - 1) { + if (is_short_rep(coder->opts[cur])) + update_short_rep(state); + else + update_literal(state); + } else { + uint32_t pos; + if (coder->opts[cur].prev_1_is_literal + && coder->opts[cur].prev_2) { + pos_prev = coder->opts[cur].pos_prev_2; + pos = coder->opts[cur].back_prev_2; + update_long_rep(state); + } else { + pos = coder->opts[cur].back_prev; + if (pos < REPS) + update_long_rep(state); + else + update_match(state); + } + + if (pos < REPS) { + reps[0] = coder->opts[pos_prev].backs[pos]; + + uint32_t i; + for (i = 1; i <= pos; ++i) + reps[i] = coder->opts[pos_prev].backs[i - 1]; + + for (; i < REPS; ++i) + reps[i] = coder->opts[pos_prev].backs[i]; + + } else { + reps[0] = pos - REPS; + + for (uint32_t i = 1; i < REPS; ++i) + reps[i] = coder->opts[pos_prev].backs[i - 1]; + } + } + + coder->opts[cur].state = state; + + for (uint32_t i = 0; i < REPS; ++i) + coder->opts[cur].backs[i] = reps[i]; + + const uint32_t cur_price = coder->opts[cur].price; + + const uint8_t current_byte = *buf; + const uint8_t match_byte = *(buf - reps[0] - 1); + + const uint32_t pos_state = position & coder->pos_mask; + + const uint32_t cur_and_1_price = cur_price + + rc_bit_0_price(coder->is_match[state][pos_state]) + + get_literal_price(coder, position, buf[-1], + !is_literal_state(state), match_byte, current_byte); + + bool next_is_literal = false; + + if (cur_and_1_price < coder->opts[cur + 1].price) { + coder->opts[cur + 1].price = cur_and_1_price; + coder->opts[cur + 1].pos_prev = cur; + make_literal(&coder->opts[cur + 1]); + next_is_literal = true; + } + + const uint32_t match_price = cur_price + + rc_bit_1_price(coder->is_match[state][pos_state]); + const uint32_t rep_match_price = match_price + + rc_bit_1_price(coder->is_rep[state]); + + if (match_byte == current_byte + && !(coder->opts[cur + 1].pos_prev < cur + && coder->opts[cur + 1].back_prev == 0)) { + + const uint32_t short_rep_price = rep_match_price + + get_short_rep_price(coder, state, pos_state); + + if (short_rep_price <= coder->opts[cur + 1].price) { + coder->opts[cur + 1].price = short_rep_price; + coder->opts[cur + 1].pos_prev = cur; + make_short_rep(&coder->opts[cur + 1]); + next_is_literal = true; + } + } + + if (buf_avail_full < 2) + return len_end; + + const uint32_t buf_avail = my_min(buf_avail_full, nice_len); + + if (!next_is_literal && match_byte != current_byte) { // speed optimization + // try literal + rep0 + const uint8_t *const buf_back = buf - reps[0] - 1; + const uint32_t limit = my_min(buf_avail_full, nice_len + 1); + + const uint32_t len_test = lzma_memcmplen(buf, buf_back, 1, limit) - 1; + + if (len_test >= 2) { + lzma_lzma_state state_2 = state; + update_literal(state_2); + + const uint32_t pos_state_next = (position + 1) & coder->pos_mask; + const uint32_t next_rep_match_price = cur_and_1_price + + rc_bit_1_price(coder->is_match[state_2][pos_state_next]) + + rc_bit_1_price(coder->is_rep[state_2]); + + //for (; len_test >= 2; --len_test) { + const uint32_t offset = cur + 1 + len_test; + + while (len_end < offset) + coder->opts[++len_end].price = RC_INFINITY_PRICE; + + const uint32_t cur_and_len_price = next_rep_match_price + + get_rep_price(coder, 0, len_test, + state_2, pos_state_next); + + if (cur_and_len_price < coder->opts[offset].price) { + coder->opts[offset].price = cur_and_len_price; + coder->opts[offset].pos_prev = cur + 1; + coder->opts[offset].back_prev = 0; + coder->opts[offset].prev_1_is_literal = true; + coder->opts[offset].prev_2 = false; + } + //} + } + } + + + uint32_t start_len = 2; // speed optimization + + for (uint32_t rep_index = 0; rep_index < REPS; ++rep_index) { + const uint8_t *const buf_back = buf - reps[rep_index] - 1; + if (not_equal_16(buf, buf_back)) + continue; + + uint32_t len_test = lzma_memcmplen(buf, buf_back, 2, buf_avail); + + while (len_end < cur + len_test) + coder->opts[++len_end].price = RC_INFINITY_PRICE; + + const uint32_t len_test_temp = len_test; + const uint32_t price = rep_match_price + get_pure_rep_price( + coder, rep_index, state, pos_state); + + do { + const uint32_t cur_and_len_price = price + + get_len_price(&coder->rep_len_encoder, + len_test, pos_state); + + if (cur_and_len_price < coder->opts[cur + len_test].price) { + coder->opts[cur + len_test].price = cur_and_len_price; + coder->opts[cur + len_test].pos_prev = cur; + coder->opts[cur + len_test].back_prev = rep_index; + coder->opts[cur + len_test].prev_1_is_literal = false; + } + } while (--len_test >= 2); + + len_test = len_test_temp; + + if (rep_index == 0) + start_len = len_test + 1; + + + uint32_t len_test_2 = len_test + 1; + const uint32_t limit = my_min(buf_avail_full, + len_test_2 + nice_len); + // NOTE: len_test_2 may be greater than limit so the call to + // lzma_memcmplen() must be done conditionally. + if (len_test_2 < limit) + len_test_2 = lzma_memcmplen(buf, buf_back, len_test_2, limit); + + len_test_2 -= len_test + 1; + + if (len_test_2 >= 2) { + lzma_lzma_state state_2 = state; + update_long_rep(state_2); + + uint32_t pos_state_next = (position + len_test) & coder->pos_mask; + + const uint32_t cur_and_len_literal_price = price + + get_len_price(&coder->rep_len_encoder, + len_test, pos_state) + + rc_bit_0_price(coder->is_match[state_2][pos_state_next]) + + get_literal_price(coder, position + len_test, + buf[len_test - 1], true, + buf_back[len_test], buf[len_test]); + + update_literal(state_2); + + pos_state_next = (position + len_test + 1) & coder->pos_mask; + + const uint32_t next_rep_match_price = cur_and_len_literal_price + + rc_bit_1_price(coder->is_match[state_2][pos_state_next]) + + rc_bit_1_price(coder->is_rep[state_2]); + + //for(; len_test_2 >= 2; len_test_2--) { + const uint32_t offset = cur + len_test + 1 + len_test_2; + + while (len_end < offset) + coder->opts[++len_end].price = RC_INFINITY_PRICE; + + const uint32_t cur_and_len_price = next_rep_match_price + + get_rep_price(coder, 0, len_test_2, + state_2, pos_state_next); + + if (cur_and_len_price < coder->opts[offset].price) { + coder->opts[offset].price = cur_and_len_price; + coder->opts[offset].pos_prev = cur + len_test + 1; + coder->opts[offset].back_prev = 0; + coder->opts[offset].prev_1_is_literal = true; + coder->opts[offset].prev_2 = true; + coder->opts[offset].pos_prev_2 = cur; + coder->opts[offset].back_prev_2 = rep_index; + } + //} + } + } + + + //for (uint32_t len_test = 2; len_test <= new_len; ++len_test) + if (new_len > buf_avail) { + new_len = buf_avail; + + matches_count = 0; + while (new_len > coder->matches[matches_count].len) + ++matches_count; + + coder->matches[matches_count++].len = new_len; + } + + + if (new_len >= start_len) { + const uint32_t normal_match_price = match_price + + rc_bit_0_price(coder->is_rep[state]); + + while (len_end < cur + new_len) + coder->opts[++len_end].price = RC_INFINITY_PRICE; + + uint32_t i = 0; + while (start_len > coder->matches[i].len) + ++i; + + for (uint32_t len_test = start_len; ; ++len_test) { + const uint32_t cur_back = coder->matches[i].dist; + uint32_t cur_and_len_price = normal_match_price + + get_dist_len_price(coder, + cur_back, len_test, pos_state); + + if (cur_and_len_price < coder->opts[cur + len_test].price) { + coder->opts[cur + len_test].price = cur_and_len_price; + coder->opts[cur + len_test].pos_prev = cur; + coder->opts[cur + len_test].back_prev + = cur_back + REPS; + coder->opts[cur + len_test].prev_1_is_literal = false; + } + + if (len_test == coder->matches[i].len) { + // Try Match + Literal + Rep0 + const uint8_t *const buf_back = buf - cur_back - 1; + uint32_t len_test_2 = len_test + 1; + const uint32_t limit = my_min(buf_avail_full, + len_test_2 + nice_len); + + // NOTE: len_test_2 may be greater than limit + // so the call to lzma_memcmplen() must be + // done conditionally. + if (len_test_2 < limit) + len_test_2 = lzma_memcmplen(buf, buf_back, + len_test_2, limit); + + len_test_2 -= len_test + 1; + + if (len_test_2 >= 2) { + lzma_lzma_state state_2 = state; + update_match(state_2); + uint32_t pos_state_next + = (position + len_test) & coder->pos_mask; + + const uint32_t cur_and_len_literal_price = cur_and_len_price + + rc_bit_0_price( + coder->is_match[state_2][pos_state_next]) + + get_literal_price(coder, + position + len_test, + buf[len_test - 1], + true, + buf_back[len_test], + buf[len_test]); + + update_literal(state_2); + pos_state_next = (pos_state_next + 1) & coder->pos_mask; + + const uint32_t next_rep_match_price + = cur_and_len_literal_price + + rc_bit_1_price( + coder->is_match[state_2][pos_state_next]) + + rc_bit_1_price(coder->is_rep[state_2]); + + // for(; len_test_2 >= 2; --len_test_2) { + const uint32_t offset = cur + len_test + 1 + len_test_2; + + while (len_end < offset) + coder->opts[++len_end].price = RC_INFINITY_PRICE; + + cur_and_len_price = next_rep_match_price + + get_rep_price(coder, 0, len_test_2, + state_2, pos_state_next); + + if (cur_and_len_price < coder->opts[offset].price) { + coder->opts[offset].price = cur_and_len_price; + coder->opts[offset].pos_prev = cur + len_test + 1; + coder->opts[offset].back_prev = 0; + coder->opts[offset].prev_1_is_literal = true; + coder->opts[offset].prev_2 = true; + coder->opts[offset].pos_prev_2 = cur; + coder->opts[offset].back_prev_2 + = cur_back + REPS; + } + //} + } + + if (++i == matches_count) + break; + } + } + } + + return len_end; +} + + +extern void +lzma_lzma_optimum_normal(lzma_lzma1_encoder *restrict coder, + lzma_mf *restrict mf, + uint32_t *restrict back_res, uint32_t *restrict len_res, + uint32_t position) +{ + // If we have symbols pending, return the next pending symbol. + if (coder->opts_end_index != coder->opts_current_index) { + assert(mf->read_ahead > 0); + *len_res = coder->opts[coder->opts_current_index].pos_prev + - coder->opts_current_index; + *back_res = coder->opts[coder->opts_current_index].back_prev; + coder->opts_current_index = coder->opts[ + coder->opts_current_index].pos_prev; + return; + } + + // Update the price tables. In LZMA SDK <= 4.60 (and possibly later) + // this was done in both initialization function and in the main loop. + // In liblzma they were moved into this single place. + if (mf->read_ahead == 0) { + if (coder->match_price_count >= (1 << 7)) + fill_dist_prices(coder); + + if (coder->align_price_count >= ALIGN_SIZE) + fill_align_prices(coder); + } + + // TODO: This needs quite a bit of cleaning still. But splitting + // the original function into two pieces makes it at least a little + // more readable, since those two parts don't share many variables. + + uint32_t len_end = helper1(coder, mf, back_res, len_res, position); + if (len_end == UINT32_MAX) + return; + + uint32_t reps[REPS]; + memcpy(reps, coder->reps, sizeof(reps)); + + uint32_t cur; + for (cur = 1; cur < len_end; ++cur) { + assert(cur < OPTS); + + coder->longest_match_length = mf_find( + mf, &coder->matches_count, coder->matches); + + if (coder->longest_match_length >= mf->nice_len) + break; + + len_end = helper2(coder, reps, mf_ptr(mf) - 1, len_end, + position + cur, cur, mf->nice_len, + my_min(mf_avail(mf) + 1, OPTS - 1 - cur)); + } + + backward(coder, len_res, back_res, cur); + return; +} diff --git a/src/liblzma/lzma/lzma_encoder_presets.c b/src/liblzma/lzma/lzma_encoder_presets.c new file mode 100644 index 0000000..711df02 --- /dev/null +++ b/src/liblzma/lzma/lzma_encoder_presets.c @@ -0,0 +1,64 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_encoder_presets.c +/// \brief Encoder presets +/// \note xz needs this even when only decoding is enabled. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "common.h" + + +extern LZMA_API(lzma_bool) +lzma_lzma_preset(lzma_options_lzma *options, uint32_t preset) +{ + const uint32_t level = preset & LZMA_PRESET_LEVEL_MASK; + const uint32_t flags = preset & ~LZMA_PRESET_LEVEL_MASK; + const uint32_t supported_flags = LZMA_PRESET_EXTREME; + + if (level > 9 || (flags & ~supported_flags)) + return true; + + options->preset_dict = NULL; + options->preset_dict_size = 0; + + options->lc = LZMA_LC_DEFAULT; + options->lp = LZMA_LP_DEFAULT; + options->pb = LZMA_PB_DEFAULT; + + static const uint8_t dict_pow2[] + = { 18, 20, 21, 22, 22, 23, 23, 24, 25, 26 }; + options->dict_size = UINT32_C(1) << dict_pow2[level]; + + if (level <= 3) { + options->mode = LZMA_MODE_FAST; + options->mf = level == 0 ? LZMA_MF_HC3 : LZMA_MF_HC4; + options->nice_len = level <= 1 ? 128 : 273; + static const uint8_t depths[] = { 4, 8, 24, 48 }; + options->depth = depths[level]; + } else { + options->mode = LZMA_MODE_NORMAL; + options->mf = LZMA_MF_BT4; + options->nice_len = level == 4 ? 16 : level == 5 ? 32 : 64; + options->depth = 0; + } + + if (flags & LZMA_PRESET_EXTREME) { + options->mode = LZMA_MODE_NORMAL; + options->mf = LZMA_MF_BT4; + if (level == 3 || level == 5) { + options->nice_len = 192; + options->depth = 0; + } else { + options->nice_len = 273; + options->depth = 512; + } + } + + return false; +} diff --git a/src/liblzma/lzma/lzma_encoder_private.h b/src/liblzma/lzma/lzma_encoder_private.h new file mode 100644 index 0000000..b228c57 --- /dev/null +++ b/src/liblzma/lzma/lzma_encoder_private.h @@ -0,0 +1,162 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzma_encoder_private.h +/// \brief Private definitions for LZMA encoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_LZMA_ENCODER_PRIVATE_H +#define LZMA_LZMA_ENCODER_PRIVATE_H + +#include "lz_encoder.h" +#include "range_encoder.h" +#include "lzma_common.h" +#include "lzma_encoder.h" + + +// Macro to compare if the first two bytes in two buffers differ. This is +// needed in lzma_lzma_optimum_*() to test if the match is at least +// MATCH_LEN_MIN bytes. Unaligned access gives tiny gain so there's no +// reason to not use it when it is supported. +#ifdef TUKLIB_FAST_UNALIGNED_ACCESS +# define not_equal_16(a, b) (read16ne(a) != read16ne(b)) +#else +# define not_equal_16(a, b) \ + ((a)[0] != (b)[0] || (a)[1] != (b)[1]) +#endif + + +// Optimal - Number of entries in the optimum array. +#define OPTS (1 << 12) + + +typedef struct { + probability choice; + probability choice2; + probability low[POS_STATES_MAX][LEN_LOW_SYMBOLS]; + probability mid[POS_STATES_MAX][LEN_MID_SYMBOLS]; + probability high[LEN_HIGH_SYMBOLS]; + + uint32_t prices[POS_STATES_MAX][LEN_SYMBOLS]; + uint32_t table_size; + uint32_t counters[POS_STATES_MAX]; + +} lzma_length_encoder; + + +typedef struct { + lzma_lzma_state state; + + bool prev_1_is_literal; + bool prev_2; + + uint32_t pos_prev_2; + uint32_t back_prev_2; + + uint32_t price; + uint32_t pos_prev; // pos_next; + uint32_t back_prev; + + uint32_t backs[REPS]; + +} lzma_optimal; + + +struct lzma_lzma1_encoder_s { + /// Range encoder + lzma_range_encoder rc; + + /// Uncompressed size (doesn't include possible preset dictionary) + uint64_t uncomp_size; + + /// If non-zero, produce at most this much output. + /// Some input may then be missing from the output. + uint64_t out_limit; + + /// If the above out_limit is non-zero, *uncomp_size_ptr is set to + /// the amount of uncompressed data that we were able to fit + /// in the output buffer. + uint64_t *uncomp_size_ptr; + + /// State + lzma_lzma_state state; + + /// The four most recent match distances + uint32_t reps[REPS]; + + /// Array of match candidates + lzma_match matches[MATCH_LEN_MAX + 1]; + + /// Number of match candidates in matches[] + uint32_t matches_count; + + /// Variable to hold the length of the longest match between calls + /// to lzma_lzma_optimum_*(). + uint32_t longest_match_length; + + /// True if using getoptimumfast + bool fast_mode; + + /// True if the encoder has been initialized by encoding the first + /// byte as a literal. + bool is_initialized; + + /// True if the range encoder has been flushed, but not all bytes + /// have been written to the output buffer yet. + bool is_flushed; + + /// True if end of payload marker will be written. + bool use_eopm; + + uint32_t pos_mask; ///< (1 << pos_bits) - 1 + uint32_t literal_context_bits; + uint32_t literal_pos_mask; + + // These are the same as in lzma_decoder.c. See comments there. + probability literal[LITERAL_CODERS_MAX][LITERAL_CODER_SIZE]; + probability is_match[STATES][POS_STATES_MAX]; + probability is_rep[STATES]; + probability is_rep0[STATES]; + probability is_rep1[STATES]; + probability is_rep2[STATES]; + probability is_rep0_long[STATES][POS_STATES_MAX]; + probability dist_slot[DIST_STATES][DIST_SLOTS]; + probability dist_special[FULL_DISTANCES - DIST_MODEL_END]; + probability dist_align[ALIGN_SIZE]; + + // These are the same as in lzma_decoder.c except that the encoders + // include also price tables. + lzma_length_encoder match_len_encoder; + lzma_length_encoder rep_len_encoder; + + // Price tables + uint32_t dist_slot_prices[DIST_STATES][DIST_SLOTS]; + uint32_t dist_prices[DIST_STATES][FULL_DISTANCES]; + uint32_t dist_table_size; + uint32_t match_price_count; + + uint32_t align_prices[ALIGN_SIZE]; + uint32_t align_price_count; + + // Optimal + uint32_t opts_end_index; + uint32_t opts_current_index; + lzma_optimal opts[OPTS]; +}; + + +extern void lzma_lzma_optimum_fast( + lzma_lzma1_encoder *restrict coder, lzma_mf *restrict mf, + uint32_t *restrict back_res, uint32_t *restrict len_res); + +extern void lzma_lzma_optimum_normal(lzma_lzma1_encoder *restrict coder, + lzma_mf *restrict mf, uint32_t *restrict back_res, + uint32_t *restrict len_res, uint32_t position); + +#endif diff --git a/src/liblzma/rangecoder/Makefile.inc b/src/liblzma/rangecoder/Makefile.inc new file mode 100644 index 0000000..d8a597a --- /dev/null +++ b/src/liblzma/rangecoder/Makefile.inc @@ -0,0 +1,21 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +EXTRA_DIST += rangecoder/price_tablegen.c + +liblzma_la_SOURCES += rangecoder/range_common.h + +if COND_ENCODER_LZMA1 +liblzma_la_SOURCES += \ + rangecoder/range_encoder.h \ + rangecoder/price.h \ + rangecoder/price_table.c +endif + +if COND_DECODER_LZMA1 +liblzma_la_SOURCES += rangecoder/range_decoder.h +endif diff --git a/src/liblzma/rangecoder/price.h b/src/liblzma/rangecoder/price.h new file mode 100644 index 0000000..8ae02ca --- /dev/null +++ b/src/liblzma/rangecoder/price.h @@ -0,0 +1,92 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file price.h +/// \brief Probability price calculation +// +// Author: Igor Pavlov +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_PRICE_H +#define LZMA_PRICE_H + + +#define RC_MOVE_REDUCING_BITS 4 +#define RC_BIT_PRICE_SHIFT_BITS 4 +#define RC_PRICE_TABLE_SIZE (RC_BIT_MODEL_TOTAL >> RC_MOVE_REDUCING_BITS) + +#define RC_INFINITY_PRICE (UINT32_C(1) << 30) + + +/// Lookup table for the inline functions defined in this file. +extern const uint8_t lzma_rc_prices[RC_PRICE_TABLE_SIZE]; + + +static inline uint32_t +rc_bit_price(const probability prob, const uint32_t bit) +{ + return lzma_rc_prices[(prob ^ ((UINT32_C(0) - bit) + & (RC_BIT_MODEL_TOTAL - 1))) >> RC_MOVE_REDUCING_BITS]; +} + + +static inline uint32_t +rc_bit_0_price(const probability prob) +{ + return lzma_rc_prices[prob >> RC_MOVE_REDUCING_BITS]; +} + + +static inline uint32_t +rc_bit_1_price(const probability prob) +{ + return lzma_rc_prices[(prob ^ (RC_BIT_MODEL_TOTAL - 1)) + >> RC_MOVE_REDUCING_BITS]; +} + + +static inline uint32_t +rc_bittree_price(const probability *const probs, + const uint32_t bit_levels, uint32_t symbol) +{ + uint32_t price = 0; + symbol += UINT32_C(1) << bit_levels; + + do { + const uint32_t bit = symbol & 1; + symbol >>= 1; + price += rc_bit_price(probs[symbol], bit); + } while (symbol != 1); + + return price; +} + + +static inline uint32_t +rc_bittree_reverse_price(const probability *const probs, + uint32_t bit_levels, uint32_t symbol) +{ + uint32_t price = 0; + uint32_t model_index = 1; + + do { + const uint32_t bit = symbol & 1; + symbol >>= 1; + price += rc_bit_price(probs[model_index], bit); + model_index = (model_index << 1) + bit; + } while (--bit_levels != 0); + + return price; +} + + +static inline uint32_t +rc_direct_price(const uint32_t bits) +{ + return bits << RC_BIT_PRICE_SHIFT_BITS; +} + +#endif diff --git a/src/liblzma/rangecoder/price_table.c b/src/liblzma/rangecoder/price_table.c new file mode 100644 index 0000000..ac64bf6 --- /dev/null +++ b/src/liblzma/rangecoder/price_table.c @@ -0,0 +1,22 @@ +/* This file has been automatically generated by price_tablegen.c. */ + +#include "range_encoder.h" + +const uint8_t lzma_rc_prices[RC_PRICE_TABLE_SIZE] = { + 128, 103, 91, 84, 78, 73, 69, 66, + 63, 61, 58, 56, 54, 52, 51, 49, + 48, 46, 45, 44, 43, 42, 41, 40, + 39, 38, 37, 36, 35, 34, 34, 33, + 32, 31, 31, 30, 29, 29, 28, 28, + 27, 26, 26, 25, 25, 24, 24, 23, + 23, 22, 22, 22, 21, 21, 20, 20, + 19, 19, 19, 18, 18, 17, 17, 17, + 16, 16, 16, 15, 15, 15, 14, 14, + 14, 13, 13, 13, 12, 12, 12, 11, + 11, 11, 11, 10, 10, 10, 10, 9, + 9, 9, 9, 8, 8, 8, 8, 7, + 7, 7, 7, 6, 6, 6, 6, 5, + 5, 5, 5, 5, 4, 4, 4, 4, + 3, 3, 3, 3, 3, 2, 2, 2, + 2, 2, 2, 1, 1, 1, 1, 1 +}; diff --git a/src/liblzma/rangecoder/price_tablegen.c b/src/liblzma/rangecoder/price_tablegen.c new file mode 100644 index 0000000..bf08ce3 --- /dev/null +++ b/src/liblzma/rangecoder/price_tablegen.c @@ -0,0 +1,87 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file price_tablegen.c +/// \brief Probability price table generator +/// +/// Compiling: gcc -std=c99 -o price_tablegen price_tablegen.c +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include +#include +#include "range_common.h" +#include "price.h" + + +static uint32_t rc_prices[RC_PRICE_TABLE_SIZE]; + + +static void +init_price_table(void) +{ + for (uint32_t i = (UINT32_C(1) << RC_MOVE_REDUCING_BITS) / 2; + i < RC_BIT_MODEL_TOTAL; + i += (UINT32_C(1) << RC_MOVE_REDUCING_BITS)) { + const uint32_t cycles_bits = RC_BIT_PRICE_SHIFT_BITS; + uint32_t w = i; + uint32_t bit_count = 0; + + for (uint32_t j = 0; j < cycles_bits; ++j) { + w *= w; + bit_count <<= 1; + + while (w >= (UINT32_C(1) << 16)) { + w >>= 1; + ++bit_count; + } + } + + rc_prices[i >> RC_MOVE_REDUCING_BITS] + = (RC_BIT_MODEL_TOTAL_BITS << cycles_bits) + - 15 - bit_count; + } + + return; +} + + +static void +print_price_table(void) +{ + printf("/* This file has been automatically generated by " + "price_tablegen.c. */\n\n" + "#include \"range_encoder.h\"\n\n" + "const uint8_t lzma_rc_prices[" + "RC_PRICE_TABLE_SIZE] = {"); + + const size_t array_size = sizeof(lzma_rc_prices) + / sizeof(lzma_rc_prices[0]); + for (size_t i = 0; i < array_size; ++i) { + if (i % 8 == 0) + printf("\n\t"); + + printf("%4" PRIu32, rc_prices[i]); + + if (i != array_size - 1) + printf(","); + } + + printf("\n};\n"); + + return; +} + + +int +main(void) +{ + init_price_table(); + print_price_table(); + return 0; +} diff --git a/src/liblzma/rangecoder/range_common.h b/src/liblzma/rangecoder/range_common.h new file mode 100644 index 0000000..2c74dc1 --- /dev/null +++ b/src/liblzma/rangecoder/range_common.h @@ -0,0 +1,71 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file range_common.h +/// \brief Common things for range encoder and decoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_RANGE_COMMON_H +#define LZMA_RANGE_COMMON_H + +#include "common.h" + + +/////////////// +// Constants // +/////////////// + +#define RC_SHIFT_BITS 8 +#define RC_TOP_BITS 24 +#define RC_TOP_VALUE (UINT32_C(1) << RC_TOP_BITS) +#define RC_BIT_MODEL_TOTAL_BITS 11 +#define RC_BIT_MODEL_TOTAL (UINT32_C(1) << RC_BIT_MODEL_TOTAL_BITS) +#define RC_MOVE_BITS 5 + + +//////////// +// Macros // +//////////// + +// Resets the probability so that both 0 and 1 have probability of 50 % +#define bit_reset(prob) \ + prob = RC_BIT_MODEL_TOTAL >> 1 + +// This does the same for a complete bit tree. +// (A tree represented as an array.) +#define bittree_reset(probs, bit_levels) \ + for (uint32_t bt_i = 0; bt_i < (1 << (bit_levels)); ++bt_i) \ + bit_reset((probs)[bt_i]) + + +////////////////////// +// Type definitions // +////////////////////// + +/// \brief Type of probabilities used with range coder +/// +/// This needs to be at least 12-bit integer, so uint16_t is a logical choice. +/// However, on some architecture and compiler combinations, a bigger type +/// may give better speed, because the probability variables are accessed +/// a lot. On the other hand, bigger probability type increases cache +/// footprint, since there are 2 to 14 thousand probability variables in +/// LZMA (assuming the limit of lc + lp <= 4; with lc + lp <= 12 there +/// would be about 1.5 million variables). +/// +/// With malicious files, the initialization speed of the LZMA decoder can +/// become important. In that case, smaller probability variables mean that +/// there is less bytes to write to RAM, which makes initialization faster. +/// With big probability type, the initialization can become so slow that it +/// can be a problem e.g. for email servers doing virus scanning. +/// +/// I will be sticking to uint16_t unless some specific architectures +/// are *much* faster (20-50 %) with uint32_t. +typedef uint16_t probability; + +#endif diff --git a/src/liblzma/rangecoder/range_decoder.h b/src/liblzma/rangecoder/range_decoder.h new file mode 100644 index 0000000..e0b051f --- /dev/null +++ b/src/liblzma/rangecoder/range_decoder.h @@ -0,0 +1,185 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file range_decoder.h +/// \brief Range Decoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_RANGE_DECODER_H +#define LZMA_RANGE_DECODER_H + +#include "range_common.h" + + +typedef struct { + uint32_t range; + uint32_t code; + uint32_t init_bytes_left; +} lzma_range_decoder; + + +/// Reads the first five bytes to initialize the range decoder. +static inline lzma_ret +rc_read_init(lzma_range_decoder *rc, const uint8_t *restrict in, + size_t *restrict in_pos, size_t in_size) +{ + while (rc->init_bytes_left > 0) { + if (*in_pos == in_size) + return LZMA_OK; + + // The first byte is always 0x00. It could have been omitted + // in LZMA2 but it wasn't, so one byte is wasted in every + // LZMA2 chunk. + if (rc->init_bytes_left == 5 && in[*in_pos] != 0x00) + return LZMA_DATA_ERROR; + + rc->code = (rc->code << 8) | in[*in_pos]; + ++*in_pos; + --rc->init_bytes_left; + } + + return LZMA_STREAM_END; +} + + +/// Makes local copies of range decoder and *in_pos variables. Doing this +/// improves speed significantly. The range decoder macros expect also +/// variables `in' and `in_size' to be defined. +#define rc_to_local(range_decoder, in_pos) \ + lzma_range_decoder rc = range_decoder; \ + size_t rc_in_pos = (in_pos); \ + uint32_t rc_bound + + +/// Stores the local copes back to the range decoder structure. +#define rc_from_local(range_decoder, in_pos) \ +do { \ + range_decoder = rc; \ + in_pos = rc_in_pos; \ +} while (0) + + +/// Resets the range decoder structure. +#define rc_reset(range_decoder) \ +do { \ + (range_decoder).range = UINT32_MAX; \ + (range_decoder).code = 0; \ + (range_decoder).init_bytes_left = 5; \ +} while (0) + + +/// When decoding has been properly finished, rc.code is always zero unless +/// the input stream is corrupt. So checking this can catch some corrupt +/// files especially if they don't have any other integrity check. +#define rc_is_finished(range_decoder) \ + ((range_decoder).code == 0) + + +/// Read the next input byte if needed. If more input is needed but there is +/// no more input available, "goto out" is used to jump out of the main +/// decoder loop. +#define rc_normalize(seq) \ +do { \ + if (rc.range < RC_TOP_VALUE) { \ + if (unlikely(rc_in_pos == in_size)) { \ + coder->sequence = seq; \ + goto out; \ + } \ + rc.range <<= RC_SHIFT_BITS; \ + rc.code = (rc.code << RC_SHIFT_BITS) | in[rc_in_pos++]; \ + } \ +} while (0) + + +/// Start decoding a bit. This must be used together with rc_update_0() +/// and rc_update_1(): +/// +/// rc_if_0(prob, seq) { +/// rc_update_0(prob); +/// // Do something +/// } else { +/// rc_update_1(prob); +/// // Do something else +/// } +/// +#define rc_if_0(prob, seq) \ + rc_normalize(seq); \ + rc_bound = (rc.range >> RC_BIT_MODEL_TOTAL_BITS) * (prob); \ + if (rc.code < rc_bound) + + +/// Update the range decoder state and the used probability variable to +/// match a decoded bit of 0. +#define rc_update_0(prob) \ +do { \ + rc.range = rc_bound; \ + prob += (RC_BIT_MODEL_TOTAL - (prob)) >> RC_MOVE_BITS; \ +} while (0) + + +/// Update the range decoder state and the used probability variable to +/// match a decoded bit of 1. +#define rc_update_1(prob) \ +do { \ + rc.range -= rc_bound; \ + rc.code -= rc_bound; \ + prob -= (prob) >> RC_MOVE_BITS; \ +} while (0) + + +/// Decodes one bit and runs action0 or action1 depending on the decoded bit. +/// This macro is used as the last step in bittree reverse decoders since +/// those don't use "symbol" for anything else than indexing the probability +/// arrays. +#define rc_bit_last(prob, action0, action1, seq) \ +do { \ + rc_if_0(prob, seq) { \ + rc_update_0(prob); \ + action0; \ + } else { \ + rc_update_1(prob); \ + action1; \ + } \ +} while (0) + + +/// Decodes one bit, updates "symbol", and runs action0 or action1 depending +/// on the decoded bit. +#define rc_bit(prob, action0, action1, seq) \ + rc_bit_last(prob, \ + symbol <<= 1; action0, \ + symbol = (symbol << 1) + 1; action1, \ + seq); + + +/// Like rc_bit() but add "case seq:" as a prefix. This makes the unrolled +/// loops more readable because the code isn't littered with "case" +/// statements. On the other hand this also makes it less readable, since +/// spotting the places where the decoder loop may be restarted is less +/// obvious. +#define rc_bit_case(prob, action0, action1, seq) \ + case seq: rc_bit(prob, action0, action1, seq) + + +/// Decode a bit without using a probability. +#define rc_direct(dest, seq) \ +do { \ + rc_normalize(seq); \ + rc.range >>= 1; \ + rc.code -= rc.range; \ + rc_bound = UINT32_C(0) - (rc.code >> 31); \ + rc.code += rc.range & rc_bound; \ + dest = (dest << 1) + (rc_bound + 1); \ +} while (0) + + +// NOTE: No macros are provided for bittree decoding. It seems to be simpler +// to just write them open in the code. + +#endif diff --git a/src/liblzma/rangecoder/range_encoder.h b/src/liblzma/rangecoder/range_encoder.h new file mode 100644 index 0000000..d794eab --- /dev/null +++ b/src/liblzma/rangecoder/range_encoder.h @@ -0,0 +1,350 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file range_encoder.h +/// \brief Range Encoder +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_RANGE_ENCODER_H +#define LZMA_RANGE_ENCODER_H + +#include "range_common.h" +#include "price.h" + + +/// Maximum number of symbols that can be put pending into lzma_range_encoder +/// structure between calls to lzma_rc_encode(). For LZMA, 48+5 is enough +/// (match with big distance and length followed by range encoder flush). +#define RC_SYMBOLS_MAX 53 + + +typedef struct { + uint64_t low; + uint64_t cache_size; + uint32_t range; + uint8_t cache; + + /// Number of bytes written out by rc_encode() -> rc_shift_low() + uint64_t out_total; + + /// Number of symbols in the tables + size_t count; + + /// rc_encode()'s position in the tables + size_t pos; + + /// Symbols to encode + enum { + RC_BIT_0, + RC_BIT_1, + RC_DIRECT_0, + RC_DIRECT_1, + RC_FLUSH, + } symbols[RC_SYMBOLS_MAX]; + + /// Probabilities associated with RC_BIT_0 or RC_BIT_1 + probability *probs[RC_SYMBOLS_MAX]; + +} lzma_range_encoder; + + +static inline void +rc_reset(lzma_range_encoder *rc) +{ + rc->low = 0; + rc->cache_size = 1; + rc->range = UINT32_MAX; + rc->cache = 0; + rc->out_total = 0; + rc->count = 0; + rc->pos = 0; +} + + +static inline void +rc_forget(lzma_range_encoder *rc) +{ + // This must not be called when rc_encode() is partially done. + assert(rc->pos == 0); + rc->count = 0; +} + + +static inline void +rc_bit(lzma_range_encoder *rc, probability *prob, uint32_t bit) +{ + rc->symbols[rc->count] = bit; + rc->probs[rc->count] = prob; + ++rc->count; +} + + +static inline void +rc_bittree(lzma_range_encoder *rc, probability *probs, + uint32_t bit_count, uint32_t symbol) +{ + uint32_t model_index = 1; + + do { + const uint32_t bit = (symbol >> --bit_count) & 1; + rc_bit(rc, &probs[model_index], bit); + model_index = (model_index << 1) + bit; + } while (bit_count != 0); +} + + +static inline void +rc_bittree_reverse(lzma_range_encoder *rc, probability *probs, + uint32_t bit_count, uint32_t symbol) +{ + uint32_t model_index = 1; + + do { + const uint32_t bit = symbol & 1; + symbol >>= 1; + rc_bit(rc, &probs[model_index], bit); + model_index = (model_index << 1) + bit; + } while (--bit_count != 0); +} + + +static inline void +rc_direct(lzma_range_encoder *rc, + uint32_t value, uint32_t bit_count) +{ + do { + rc->symbols[rc->count++] + = RC_DIRECT_0 + ((value >> --bit_count) & 1); + } while (bit_count != 0); +} + + +static inline void +rc_flush(lzma_range_encoder *rc) +{ + for (size_t i = 0; i < 5; ++i) + rc->symbols[rc->count++] = RC_FLUSH; +} + + +static inline bool +rc_shift_low(lzma_range_encoder *rc, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + if ((uint32_t)(rc->low) < (uint32_t)(0xFF000000) + || (uint32_t)(rc->low >> 32) != 0) { + do { + if (*out_pos == out_size) + return true; + + out[*out_pos] = rc->cache + (uint8_t)(rc->low >> 32); + ++*out_pos; + ++rc->out_total; + rc->cache = 0xFF; + + } while (--rc->cache_size != 0); + + rc->cache = (rc->low >> 24) & 0xFF; + } + + ++rc->cache_size; + rc->low = (rc->low & 0x00FFFFFF) << RC_SHIFT_BITS; + + return false; +} + + +// NOTE: The last two arguments are uint64_t instead of size_t because in +// the dummy version these refer to the size of the whole range-encoded +// output stream, not just to the currently available output buffer space. +static inline bool +rc_shift_low_dummy(uint64_t *low, uint64_t *cache_size, uint8_t *cache, + uint64_t *out_pos, uint64_t out_size) +{ + if ((uint32_t)(*low) < (uint32_t)(0xFF000000) + || (uint32_t)(*low >> 32) != 0) { + do { + if (*out_pos == out_size) + return true; + + ++*out_pos; + *cache = 0xFF; + + } while (--*cache_size != 0); + + *cache = (*low >> 24) & 0xFF; + } + + ++*cache_size; + *low = (*low & 0x00FFFFFF) << RC_SHIFT_BITS; + + return false; +} + + +static inline bool +rc_encode(lzma_range_encoder *rc, + uint8_t *out, size_t *out_pos, size_t out_size) +{ + assert(rc->count <= RC_SYMBOLS_MAX); + + while (rc->pos < rc->count) { + // Normalize + if (rc->range < RC_TOP_VALUE) { + if (rc_shift_low(rc, out, out_pos, out_size)) + return true; + + rc->range <<= RC_SHIFT_BITS; + } + + // Encode a bit + switch (rc->symbols[rc->pos]) { + case RC_BIT_0: { + probability prob = *rc->probs[rc->pos]; + rc->range = (rc->range >> RC_BIT_MODEL_TOTAL_BITS) + * prob; + prob += (RC_BIT_MODEL_TOTAL - prob) >> RC_MOVE_BITS; + *rc->probs[rc->pos] = prob; + break; + } + + case RC_BIT_1: { + probability prob = *rc->probs[rc->pos]; + const uint32_t bound = prob * (rc->range + >> RC_BIT_MODEL_TOTAL_BITS); + rc->low += bound; + rc->range -= bound; + prob -= prob >> RC_MOVE_BITS; + *rc->probs[rc->pos] = prob; + break; + } + + case RC_DIRECT_0: + rc->range >>= 1; + break; + + case RC_DIRECT_1: + rc->range >>= 1; + rc->low += rc->range; + break; + + case RC_FLUSH: + // Prevent further normalizations. + rc->range = UINT32_MAX; + + // Flush the last five bytes (see rc_flush()). + do { + if (rc_shift_low(rc, out, out_pos, out_size)) + return true; + } while (++rc->pos < rc->count); + + // Reset the range encoder so we are ready to continue + // encoding if we weren't finishing the stream. + rc_reset(rc); + return false; + + default: + assert(0); + break; + } + + ++rc->pos; + } + + rc->count = 0; + rc->pos = 0; + + return false; +} + + +static inline bool +rc_encode_dummy(const lzma_range_encoder *rc, uint64_t out_limit) +{ + assert(rc->count <= RC_SYMBOLS_MAX); + + uint64_t low = rc->low; + uint64_t cache_size = rc->cache_size; + uint32_t range = rc->range; + uint8_t cache = rc->cache; + uint64_t out_pos = rc->out_total; + + size_t pos = rc->pos; + + while (true) { + // Normalize + if (range < RC_TOP_VALUE) { + if (rc_shift_low_dummy(&low, &cache_size, &cache, + &out_pos, out_limit)) + return true; + + range <<= RC_SHIFT_BITS; + } + + // This check is here because the normalization above must + // be done before flushing the last bytes. + if (pos == rc->count) + break; + + // Encode a bit + switch (rc->symbols[pos]) { + case RC_BIT_0: { + probability prob = *rc->probs[pos]; + range = (range >> RC_BIT_MODEL_TOTAL_BITS) + * prob; + break; + } + + case RC_BIT_1: { + probability prob = *rc->probs[pos]; + const uint32_t bound = prob * (range + >> RC_BIT_MODEL_TOTAL_BITS); + low += bound; + range -= bound; + break; + } + + case RC_DIRECT_0: + range >>= 1; + break; + + case RC_DIRECT_1: + range >>= 1; + low += range; + break; + + case RC_FLUSH: + default: + assert(0); + break; + } + + ++pos; + } + + // Flush the last bytes. This isn't in rc->symbols[] so we do + // it after the above loop to take into account the size of + // the flushing that will be done at the end of the stream. + for (pos = 0; pos < 5; ++pos) { + if (rc_shift_low_dummy(&low, &cache_size, + &cache, &out_pos, out_limit)) + return true; + } + + return false; +} + + +static inline uint64_t +rc_pending(const lzma_range_encoder *rc) +{ + return rc->cache_size + 5 - 1; +} + +#endif diff --git a/src/liblzma/simple/Makefile.inc b/src/liblzma/simple/Makefile.inc new file mode 100644 index 0000000..dc092f9 --- /dev/null +++ b/src/liblzma/simple/Makefile.inc @@ -0,0 +1,51 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +liblzma_la_SOURCES += \ + simple/simple_coder.c \ + simple/simple_coder.h \ + simple/simple_private.h + +if COND_ENCODER_SIMPLE +liblzma_la_SOURCES += \ + simple/simple_encoder.c \ + simple/simple_encoder.h +endif + +if COND_DECODER_SIMPLE +liblzma_la_SOURCES += \ + simple/simple_decoder.c \ + simple/simple_decoder.h +endif + +if COND_FILTER_X86 +liblzma_la_SOURCES += simple/x86.c +endif + +if COND_FILTER_POWERPC +liblzma_la_SOURCES += simple/powerpc.c +endif + +if COND_FILTER_IA64 +liblzma_la_SOURCES += simple/ia64.c +endif + +if COND_FILTER_ARM +liblzma_la_SOURCES += simple/arm.c +endif + +if COND_FILTER_ARMTHUMB +liblzma_la_SOURCES += simple/armthumb.c +endif + +if COND_FILTER_ARM64 +liblzma_la_SOURCES += simple/arm64.c +endif + +if COND_FILTER_SPARC +liblzma_la_SOURCES += simple/sparc.c +endif diff --git a/src/liblzma/simple/arm.c b/src/liblzma/simple/arm.c new file mode 100644 index 0000000..6e53970 --- /dev/null +++ b/src/liblzma/simple/arm.c @@ -0,0 +1,75 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file arm.c +/// \brief Filter for ARM binaries +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +static size_t +arm_code(void *simple lzma_attribute((__unused__)), + uint32_t now_pos, bool is_encoder, + uint8_t *buffer, size_t size) +{ + size_t i; + for (i = 0; i + 4 <= size; i += 4) { + if (buffer[i + 3] == 0xEB) { + uint32_t src = ((uint32_t)(buffer[i + 2]) << 16) + | ((uint32_t)(buffer[i + 1]) << 8) + | (uint32_t)(buffer[i + 0]); + src <<= 2; + + uint32_t dest; + if (is_encoder) + dest = now_pos + (uint32_t)(i) + 8 + src; + else + dest = src - (now_pos + (uint32_t)(i) + 8); + + dest >>= 2; + buffer[i + 2] = (dest >> 16); + buffer[i + 1] = (dest >> 8); + buffer[i + 0] = dest; + } + } + + return i; +} + + +static lzma_ret +arm_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, bool is_encoder) +{ + return lzma_simple_coder_init(next, allocator, filters, + &arm_code, 0, 4, 4, is_encoder); +} + + +#ifdef HAVE_ENCODER_ARM +extern lzma_ret +lzma_simple_arm_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return arm_coder_init(next, allocator, filters, true); +} +#endif + + +#ifdef HAVE_DECODER_ARM +extern lzma_ret +lzma_simple_arm_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return arm_coder_init(next, allocator, filters, false); +} +#endif diff --git a/src/liblzma/simple/arm64.c b/src/liblzma/simple/arm64.c new file mode 100644 index 0000000..0fe0824 --- /dev/null +++ b/src/liblzma/simple/arm64.c @@ -0,0 +1,137 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file arm64.c +/// \brief Filter for ARM64 binaries +/// +/// This converts ARM64 relative addresses in the BL and ADRP immediates +/// to absolute values to increase redundancy of ARM64 code. +/// +/// Converting B or ADR instructions was also tested but it's not useful. +/// A majority of the jumps for the B instruction are very small (+/- 0xFF). +/// These are typical for loops and if-statements. Encoding them to their +/// absolute address reduces redundancy since many of the small relative +/// jump values are repeated, but very few of the absolute addresses are. +// +// Authors: Lasse Collin +// Jia Tan +// Igor Pavlov +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +static size_t +arm64_code(void *simple lzma_attribute((__unused__)), + uint32_t now_pos, bool is_encoder, + uint8_t *buffer, size_t size) +{ + size_t i; + + // Clang 14.0.6 on x86-64 makes this four times bigger and 40 % slower + // with auto-vectorization that is enabled by default with -O2. + // Such vectorization bloat happens with -O2 when targeting ARM64 too + // but performance hasn't been tested. +#ifdef __clang__ +# pragma clang loop vectorize(disable) +#endif + for (i = 0; i + 4 <= size; i += 4) { + uint32_t pc = (uint32_t)(now_pos + i); + uint32_t instr = read32le(buffer + i); + + if ((instr >> 26) == 0x25) { + // BL instruction: + // The full 26-bit immediate is converted. + // The range is +/-128 MiB. + // + // Using the full range is helps quite a lot with + // big executables. Smaller range would reduce false + // positives in non-code sections of the input though + // so this is a compromise that slightly favors big + // files. With the full range only six bits of the 32 + // need to match to trigger a conversion. + const uint32_t src = instr; + instr = 0x94000000; + + pc >>= 2; + if (!is_encoder) + pc = 0U - pc; + + instr |= (src + pc) & 0x03FFFFFF; + write32le(buffer + i, instr); + + } else if ((instr & 0x9F000000) == 0x90000000) { + // ADRP instruction: + // Only values in the range +/-512 MiB are converted. + // + // Using less than the full +/-4 GiB range reduces + // false positives on non-code sections of the input + // while being excellent for executables up to 512 MiB. + // The positive effect of ADRP conversion is smaller + // than that of BL but it also doesn't hurt so much in + // non-code sections of input because, with +/-512 MiB + // range, nine bits of 32 need to match to trigger a + // conversion (two 10-bit match choices = 9 bits). + const uint32_t src = ((instr >> 29) & 3) + | ((instr >> 3) & 0x001FFFFC); + + // With the addition only one branch is needed to + // check the +/- range. This is usually false when + // processing ARM64 code so branch prediction will + // handle it well in terms of performance. + // + //if ((src & 0x001E0000) != 0 + // && (src & 0x001E0000) != 0x001E0000) + if ((src + 0x00020000) & 0x001C0000) + continue; + + instr &= 0x9000001F; + + pc >>= 12; + if (!is_encoder) + pc = 0U - pc; + + const uint32_t dest = src + pc; + instr |= (dest & 3) << 29; + instr |= (dest & 0x0003FFFC) << 3; + instr |= (0U - (dest & 0x00020000)) & 0x00E00000; + write32le(buffer + i, instr); + } + } + + return i; +} + + +static lzma_ret +arm64_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, bool is_encoder) +{ + return lzma_simple_coder_init(next, allocator, filters, + &arm64_code, 0, 4, 4, is_encoder); +} + + +#ifdef HAVE_ENCODER_ARM64 +extern lzma_ret +lzma_simple_arm64_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return arm64_coder_init(next, allocator, filters, true); +} +#endif + + +#ifdef HAVE_DECODER_ARM64 +extern lzma_ret +lzma_simple_arm64_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return arm64_coder_init(next, allocator, filters, false); +} +#endif diff --git a/src/liblzma/simple/armthumb.c b/src/liblzma/simple/armthumb.c new file mode 100644 index 0000000..25d8dbd --- /dev/null +++ b/src/liblzma/simple/armthumb.c @@ -0,0 +1,80 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file armthumb.c +/// \brief Filter for ARM-Thumb binaries +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +static size_t +armthumb_code(void *simple lzma_attribute((__unused__)), + uint32_t now_pos, bool is_encoder, + uint8_t *buffer, size_t size) +{ + size_t i; + for (i = 0; i + 4 <= size; i += 2) { + if ((buffer[i + 1] & 0xF8) == 0xF0 + && (buffer[i + 3] & 0xF8) == 0xF8) { + uint32_t src = (((uint32_t)(buffer[i + 1]) & 7) << 19) + | ((uint32_t)(buffer[i + 0]) << 11) + | (((uint32_t)(buffer[i + 3]) & 7) << 8) + | (uint32_t)(buffer[i + 2]); + + src <<= 1; + + uint32_t dest; + if (is_encoder) + dest = now_pos + (uint32_t)(i) + 4 + src; + else + dest = src - (now_pos + (uint32_t)(i) + 4); + + dest >>= 1; + buffer[i + 1] = 0xF0 | ((dest >> 19) & 0x7); + buffer[i + 0] = (dest >> 11); + buffer[i + 3] = 0xF8 | ((dest >> 8) & 0x7); + buffer[i + 2] = (dest); + i += 2; + } + } + + return i; +} + + +static lzma_ret +armthumb_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, bool is_encoder) +{ + return lzma_simple_coder_init(next, allocator, filters, + &armthumb_code, 0, 4, 2, is_encoder); +} + + +#ifdef HAVE_ENCODER_ARMTHUMB +extern lzma_ret +lzma_simple_armthumb_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return armthumb_coder_init(next, allocator, filters, true); +} +#endif + + +#ifdef HAVE_DECODER_ARMTHUMB +extern lzma_ret +lzma_simple_armthumb_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return armthumb_coder_init(next, allocator, filters, false); +} +#endif diff --git a/src/liblzma/simple/ia64.c b/src/liblzma/simple/ia64.c new file mode 100644 index 0000000..692b0a2 --- /dev/null +++ b/src/liblzma/simple/ia64.c @@ -0,0 +1,116 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file ia64.c +/// \brief Filter for IA64 (Itanium) binaries +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +static size_t +ia64_code(void *simple lzma_attribute((__unused__)), + uint32_t now_pos, bool is_encoder, + uint8_t *buffer, size_t size) +{ + static const uint32_t BRANCH_TABLE[32] = { + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 4, 4, 6, 6, 0, 0, 7, 7, + 4, 4, 0, 0, 4, 4, 0, 0 + }; + + size_t i; + for (i = 0; i + 16 <= size; i += 16) { + const uint32_t instr_template = buffer[i] & 0x1F; + const uint32_t mask = BRANCH_TABLE[instr_template]; + uint32_t bit_pos = 5; + + for (size_t slot = 0; slot < 3; ++slot, bit_pos += 41) { + if (((mask >> slot) & 1) == 0) + continue; + + const size_t byte_pos = (bit_pos >> 3); + const uint32_t bit_res = bit_pos & 0x7; + uint64_t instruction = 0; + + for (size_t j = 0; j < 6; ++j) + instruction += (uint64_t)( + buffer[i + j + byte_pos]) + << (8 * j); + + uint64_t inst_norm = instruction >> bit_res; + + if (((inst_norm >> 37) & 0xF) == 0x5 + && ((inst_norm >> 9) & 0x7) == 0 + /* && (inst_norm & 0x3F)== 0 */ + ) { + uint32_t src = (uint32_t)( + (inst_norm >> 13) & 0xFFFFF); + src |= ((inst_norm >> 36) & 1) << 20; + + src <<= 4; + + uint32_t dest; + if (is_encoder) + dest = now_pos + (uint32_t)(i) + src; + else + dest = src - (now_pos + (uint32_t)(i)); + + dest >>= 4; + + inst_norm &= ~((uint64_t)(0x8FFFFF) << 13); + inst_norm |= (uint64_t)(dest & 0xFFFFF) << 13; + inst_norm |= (uint64_t)(dest & 0x100000) + << (36 - 20); + + instruction &= (1U << bit_res) - 1; + instruction |= (inst_norm << bit_res); + + for (size_t j = 0; j < 6; j++) + buffer[i + j + byte_pos] = (uint8_t)( + instruction + >> (8 * j)); + } + } + } + + return i; +} + + +static lzma_ret +ia64_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, bool is_encoder) +{ + return lzma_simple_coder_init(next, allocator, filters, + &ia64_code, 0, 16, 16, is_encoder); +} + + +#ifdef HAVE_ENCODER_IA64 +extern lzma_ret +lzma_simple_ia64_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return ia64_coder_init(next, allocator, filters, true); +} +#endif + + +#ifdef HAVE_DECODER_IA64 +extern lzma_ret +lzma_simple_ia64_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return ia64_coder_init(next, allocator, filters, false); +} +#endif diff --git a/src/liblzma/simple/powerpc.c b/src/liblzma/simple/powerpc.c new file mode 100644 index 0000000..3a340fd --- /dev/null +++ b/src/liblzma/simple/powerpc.c @@ -0,0 +1,80 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file powerpc.c +/// \brief Filter for PowerPC (big endian) binaries +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +static size_t +powerpc_code(void *simple lzma_attribute((__unused__)), + uint32_t now_pos, bool is_encoder, + uint8_t *buffer, size_t size) +{ + size_t i; + for (i = 0; i + 4 <= size; i += 4) { + // PowerPC branch 6(48) 24(Offset) 1(Abs) 1(Link) + if ((buffer[i] >> 2) == 0x12 + && ((buffer[i + 3] & 3) == 1)) { + + const uint32_t src + = (((uint32_t)(buffer[i + 0]) & 3) << 24) + | ((uint32_t)(buffer[i + 1]) << 16) + | ((uint32_t)(buffer[i + 2]) << 8) + | ((uint32_t)(buffer[i + 3]) & ~UINT32_C(3)); + + uint32_t dest; + if (is_encoder) + dest = now_pos + (uint32_t)(i) + src; + else + dest = src - (now_pos + (uint32_t)(i)); + + buffer[i + 0] = 0x48 | ((dest >> 24) & 0x03); + buffer[i + 1] = (dest >> 16); + buffer[i + 2] = (dest >> 8); + buffer[i + 3] &= 0x03; + buffer[i + 3] |= dest; + } + } + + return i; +} + + +static lzma_ret +powerpc_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, bool is_encoder) +{ + return lzma_simple_coder_init(next, allocator, filters, + &powerpc_code, 0, 4, 4, is_encoder); +} + + +#ifdef HAVE_ENCODER_POWERPC +extern lzma_ret +lzma_simple_powerpc_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return powerpc_coder_init(next, allocator, filters, true); +} +#endif + + +#ifdef HAVE_DECODER_POWERPC +extern lzma_ret +lzma_simple_powerpc_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return powerpc_coder_init(next, allocator, filters, false); +} +#endif diff --git a/src/liblzma/simple/simple_coder.c b/src/liblzma/simple/simple_coder.c new file mode 100644 index 0000000..4f499be --- /dev/null +++ b/src/liblzma/simple/simple_coder.c @@ -0,0 +1,290 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file simple_coder.c +/// \brief Wrapper for simple filters +/// +/// Simple filters don't change the size of the data i.e. number of bytes +/// in equals the number of bytes out. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +/// Copied or encodes/decodes more data to out[]. +static lzma_ret +copy_or_code(lzma_simple_coder *coder, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + assert(!coder->end_was_reached); + + if (coder->next.code == NULL) { + lzma_bufcpy(in, in_pos, in_size, out, out_pos, out_size); + + // Check if end of stream was reached. + if (coder->is_encoder && action == LZMA_FINISH + && *in_pos == in_size) + coder->end_was_reached = true; + + } else { + // Call the next coder in the chain to provide us some data. + const lzma_ret ret = coder->next.code( + coder->next.coder, allocator, + in, in_pos, in_size, + out, out_pos, out_size, action); + + if (ret == LZMA_STREAM_END) { + assert(!coder->is_encoder + || action == LZMA_FINISH); + coder->end_was_reached = true; + + } else if (ret != LZMA_OK) { + return ret; + } + } + + return LZMA_OK; +} + + +static size_t +call_filter(lzma_simple_coder *coder, uint8_t *buffer, size_t size) +{ + const size_t filtered = coder->filter(coder->simple, + coder->now_pos, coder->is_encoder, + buffer, size); + coder->now_pos += filtered; + return filtered; +} + + +static lzma_ret +simple_code(void *coder_ptr, const lzma_allocator *allocator, + const uint8_t *restrict in, size_t *restrict in_pos, + size_t in_size, uint8_t *restrict out, + size_t *restrict out_pos, size_t out_size, lzma_action action) +{ + lzma_simple_coder *coder = coder_ptr; + + // TODO: Add partial support for LZMA_SYNC_FLUSH. We can support it + // in cases when the filter is able to filter everything. With most + // simple filters it can be done at offset that is a multiple of 2, + // 4, or 16. With x86 filter, it needs good luck, and thus cannot + // be made to work predictably. + if (action == LZMA_SYNC_FLUSH) + return LZMA_OPTIONS_ERROR; + + // Flush already filtered data from coder->buffer[] to out[]. + if (coder->pos < coder->filtered) { + lzma_bufcpy(coder->buffer, &coder->pos, coder->filtered, + out, out_pos, out_size); + + // If we couldn't flush all the filtered data, return to + // application immediately. + if (coder->pos < coder->filtered) + return LZMA_OK; + + if (coder->end_was_reached) { + assert(coder->filtered == coder->size); + return LZMA_STREAM_END; + } + } + + // If we get here, there is no filtered data left in the buffer. + coder->filtered = 0; + + assert(!coder->end_was_reached); + + // If there is more output space left than there is unfiltered data + // in coder->buffer[], flush coder->buffer[] to out[], and copy/code + // more data to out[] hopefully filling it completely. Then filter + // the data in out[]. This step is where most of the data gets + // filtered if the buffer sizes used by the application are reasonable. + const size_t out_avail = out_size - *out_pos; + const size_t buf_avail = coder->size - coder->pos; + if (out_avail > buf_avail || buf_avail == 0) { + // Store the old position so that we know from which byte + // to start filtering. + const size_t out_start = *out_pos; + + // Flush data from coder->buffer[] to out[], but don't reset + // coder->pos and coder->size yet. This way the coder can be + // restarted if the next filter in the chain returns e.g. + // LZMA_MEM_ERROR. + // + // Do the memcpy() conditionally because out can be NULL + // (in which case buf_avail is always 0). Calling memcpy() + // with a null-pointer is undefined even if the third + // argument is 0. + if (buf_avail > 0) + memcpy(out + *out_pos, coder->buffer + coder->pos, + buf_avail); + + *out_pos += buf_avail; + + // Copy/Encode/Decode more data to out[]. + { + const lzma_ret ret = copy_or_code(coder, allocator, + in, in_pos, in_size, + out, out_pos, out_size, action); + assert(ret != LZMA_STREAM_END); + if (ret != LZMA_OK) + return ret; + } + + // Filter out[]. + const size_t size = *out_pos - out_start; + const size_t filtered = call_filter( + coder, out + out_start, size); + + const size_t unfiltered = size - filtered; + assert(unfiltered <= coder->allocated / 2); + + // Now we can update coder->pos and coder->size, because + // the next coder in the chain (if any) was successful. + coder->pos = 0; + coder->size = unfiltered; + + if (coder->end_was_reached) { + // The last byte has been copied to out[] already. + // They are left as is. + coder->size = 0; + + } else if (unfiltered > 0) { + // There is unfiltered data left in out[]. Copy it to + // coder->buffer[] and rewind *out_pos appropriately. + *out_pos -= unfiltered; + memcpy(coder->buffer, out + *out_pos, unfiltered); + } + } else if (coder->pos > 0) { + memmove(coder->buffer, coder->buffer + coder->pos, buf_avail); + coder->size -= coder->pos; + coder->pos = 0; + } + + assert(coder->pos == 0); + + // If coder->buffer[] isn't empty, try to fill it by copying/decoding + // more data. Then filter coder->buffer[] and copy the successfully + // filtered data to out[]. It is probable, that some filtered and + // unfiltered data will be left to coder->buffer[]. + if (coder->size > 0) { + { + const lzma_ret ret = copy_or_code(coder, allocator, + in, in_pos, in_size, + coder->buffer, &coder->size, + coder->allocated, action); + assert(ret != LZMA_STREAM_END); + if (ret != LZMA_OK) + return ret; + } + + coder->filtered = call_filter( + coder, coder->buffer, coder->size); + + // Everything is considered to be filtered if coder->buffer[] + // contains the last bytes of the data. + if (coder->end_was_reached) + coder->filtered = coder->size; + + // Flush as much as possible. + lzma_bufcpy(coder->buffer, &coder->pos, coder->filtered, + out, out_pos, out_size); + } + + // Check if we got everything done. + if (coder->end_was_reached && coder->pos == coder->size) + return LZMA_STREAM_END; + + return LZMA_OK; +} + + +static void +simple_coder_end(void *coder_ptr, const lzma_allocator *allocator) +{ + lzma_simple_coder *coder = coder_ptr; + lzma_next_end(&coder->next, allocator); + lzma_free(coder->simple, allocator); + lzma_free(coder, allocator); + return; +} + + +static lzma_ret +simple_coder_update(void *coder_ptr, const lzma_allocator *allocator, + const lzma_filter *filters_null lzma_attribute((__unused__)), + const lzma_filter *reversed_filters) +{ + lzma_simple_coder *coder = coder_ptr; + + // No update support, just call the next filter in the chain. + return lzma_next_filter_update( + &coder->next, allocator, reversed_filters + 1); +} + + +extern lzma_ret +lzma_simple_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, + size_t (*filter)(void *simple, uint32_t now_pos, + bool is_encoder, uint8_t *buffer, size_t size), + size_t simple_size, size_t unfiltered_max, + uint32_t alignment, bool is_encoder) +{ + // Allocate memory for the lzma_simple_coder structure if needed. + lzma_simple_coder *coder = next->coder; + if (coder == NULL) { + // Here we allocate space also for the temporary buffer. We + // need twice the size of unfiltered_max, because then it + // is always possible to filter at least unfiltered_max bytes + // more data in coder->buffer[] if it can be filled completely. + coder = lzma_alloc(sizeof(lzma_simple_coder) + + 2 * unfiltered_max, allocator); + if (coder == NULL) + return LZMA_MEM_ERROR; + + next->coder = coder; + next->code = &simple_code; + next->end = &simple_coder_end; + next->update = &simple_coder_update; + + coder->next = LZMA_NEXT_CODER_INIT; + coder->filter = filter; + coder->allocated = 2 * unfiltered_max; + + // Allocate memory for filter-specific data structure. + if (simple_size > 0) { + coder->simple = lzma_alloc(simple_size, allocator); + if (coder->simple == NULL) + return LZMA_MEM_ERROR; + } else { + coder->simple = NULL; + } + } + + if (filters[0].options != NULL) { + const lzma_options_bcj *simple = filters[0].options; + coder->now_pos = simple->start_offset; + if (coder->now_pos & (alignment - 1)) + return LZMA_OPTIONS_ERROR; + } else { + coder->now_pos = 0; + } + + // Reset variables. + coder->is_encoder = is_encoder; + coder->end_was_reached = false; + coder->pos = 0; + coder->filtered = 0; + coder->size = 0; + + return lzma_next_filter_init(&coder->next, allocator, filters + 1); +} diff --git a/src/liblzma/simple/simple_coder.h b/src/liblzma/simple/simple_coder.h new file mode 100644 index 0000000..668a509 --- /dev/null +++ b/src/liblzma/simple/simple_coder.h @@ -0,0 +1,81 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file simple_coder.h +/// \brief Wrapper for simple filters +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_SIMPLE_CODER_H +#define LZMA_SIMPLE_CODER_H + +#include "common.h" + + +extern lzma_ret lzma_simple_x86_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_simple_x86_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + + +extern lzma_ret lzma_simple_powerpc_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_simple_powerpc_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + + +extern lzma_ret lzma_simple_ia64_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_simple_ia64_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + + +extern lzma_ret lzma_simple_arm_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_simple_arm_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + + +extern lzma_ret lzma_simple_armthumb_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_simple_armthumb_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + + +extern lzma_ret lzma_simple_arm64_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_simple_arm64_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + + +extern lzma_ret lzma_simple_sparc_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +extern lzma_ret lzma_simple_sparc_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters); + +#endif diff --git a/src/liblzma/simple/simple_decoder.c b/src/liblzma/simple/simple_decoder.c new file mode 100644 index 0000000..dc4d241 --- /dev/null +++ b/src/liblzma/simple/simple_decoder.c @@ -0,0 +1,40 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file simple_decoder.c +/// \brief Properties decoder for simple filters +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_decoder.h" + + +extern lzma_ret +lzma_simple_props_decode(void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size) +{ + if (props_size == 0) + return LZMA_OK; + + if (props_size != 4) + return LZMA_OPTIONS_ERROR; + + lzma_options_bcj *opt = lzma_alloc( + sizeof(lzma_options_bcj), allocator); + if (opt == NULL) + return LZMA_MEM_ERROR; + + opt->start_offset = read32le(props); + + // Don't leave an options structure allocated if start_offset is zero. + if (opt->start_offset == 0) + lzma_free(opt, allocator); + else + *options = opt; + + return LZMA_OK; +} diff --git a/src/liblzma/simple/simple_decoder.h b/src/liblzma/simple/simple_decoder.h new file mode 100644 index 0000000..bed8d37 --- /dev/null +++ b/src/liblzma/simple/simple_decoder.h @@ -0,0 +1,22 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file simple_decoder.h +/// \brief Properties decoder for simple filters +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_SIMPLE_DECODER_H +#define LZMA_SIMPLE_DECODER_H + +#include "simple_coder.h" + +extern lzma_ret lzma_simple_props_decode( + void **options, const lzma_allocator *allocator, + const uint8_t *props, size_t props_size); + +#endif diff --git a/src/liblzma/simple/simple_encoder.c b/src/liblzma/simple/simple_encoder.c new file mode 100644 index 0000000..d2cc03e --- /dev/null +++ b/src/liblzma/simple/simple_encoder.c @@ -0,0 +1,38 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file simple_encoder.c +/// \brief Properties encoder for simple filters +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_encoder.h" + + +extern lzma_ret +lzma_simple_props_size(uint32_t *size, const void *options) +{ + const lzma_options_bcj *const opt = options; + *size = (opt == NULL || opt->start_offset == 0) ? 0 : 4; + return LZMA_OK; +} + + +extern lzma_ret +lzma_simple_props_encode(const void *options, uint8_t *out) +{ + const lzma_options_bcj *const opt = options; + + // The default start offset is zero, so we don't need to store any + // options unless the start offset is non-zero. + if (opt == NULL || opt->start_offset == 0) + return LZMA_OK; + + write32le(out, opt->start_offset); + + return LZMA_OK; +} diff --git a/src/liblzma/simple/simple_encoder.h b/src/liblzma/simple/simple_encoder.h new file mode 100644 index 0000000..1cee482 --- /dev/null +++ b/src/liblzma/simple/simple_encoder.h @@ -0,0 +1,23 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file simple_encoder.c +/// \brief Properties encoder for simple filters +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_SIMPLE_ENCODER_H +#define LZMA_SIMPLE_ENCODER_H + +#include "simple_coder.h" + + +extern lzma_ret lzma_simple_props_size(uint32_t *size, const void *options); + +extern lzma_ret lzma_simple_props_encode(const void *options, uint8_t *out); + +#endif diff --git a/src/liblzma/simple/simple_private.h b/src/liblzma/simple/simple_private.h new file mode 100644 index 0000000..9d2c0fd --- /dev/null +++ b/src/liblzma/simple/simple_private.h @@ -0,0 +1,74 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file simple_private.h +/// \brief Private definitions for so called simple filters +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef LZMA_SIMPLE_PRIVATE_H +#define LZMA_SIMPLE_PRIVATE_H + +#include "simple_coder.h" + + +typedef struct { + /// Next filter in the chain + lzma_next_coder next; + + /// True if the next coder in the chain has returned LZMA_STREAM_END. + bool end_was_reached; + + /// True if filter() should encode the data; false to decode. + /// Currently all simple filters use the same function for encoding + /// and decoding, because the difference between encoders and decoders + /// is very small. + bool is_encoder; + + /// Pointer to filter-specific function, which does + /// the actual filtering. + size_t (*filter)(void *simple, uint32_t now_pos, + bool is_encoder, uint8_t *buffer, size_t size); + + /// Pointer to filter-specific data, or NULL if filter doesn't need + /// any extra data. + void *simple; + + /// The lowest 32 bits of the current position in the data. Most + /// filters need this to do conversions between absolute and relative + /// addresses. + uint32_t now_pos; + + /// Size of the memory allocated for the buffer. + size_t allocated; + + /// Flushing position in the temporary buffer. buffer[pos] is the + /// next byte to be copied to out[]. + size_t pos; + + /// buffer[filtered] is the first unfiltered byte. When pos is smaller + /// than filtered, there is unflushed filtered data in the buffer. + size_t filtered; + + /// Total number of bytes (both filtered and unfiltered) currently + /// in the temporary buffer. + size_t size; + + /// Temporary buffer + uint8_t buffer[]; +} lzma_simple_coder; + + +extern lzma_ret lzma_simple_coder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters, + size_t (*filter)(void *simple, uint32_t now_pos, + bool is_encoder, uint8_t *buffer, size_t size), + size_t simple_size, size_t unfiltered_max, + uint32_t alignment, bool is_encoder); + +#endif diff --git a/src/liblzma/simple/sparc.c b/src/liblzma/simple/sparc.c new file mode 100644 index 0000000..bad8492 --- /dev/null +++ b/src/liblzma/simple/sparc.c @@ -0,0 +1,87 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file sparc.c +/// \brief Filter for SPARC binaries +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +static size_t +sparc_code(void *simple lzma_attribute((__unused__)), + uint32_t now_pos, bool is_encoder, + uint8_t *buffer, size_t size) +{ + size_t i; + for (i = 0; i + 4 <= size; i += 4) { + + if ((buffer[i] == 0x40 && (buffer[i + 1] & 0xC0) == 0x00) + || (buffer[i] == 0x7F + && (buffer[i + 1] & 0xC0) == 0xC0)) { + + uint32_t src = ((uint32_t)buffer[i + 0] << 24) + | ((uint32_t)buffer[i + 1] << 16) + | ((uint32_t)buffer[i + 2] << 8) + | ((uint32_t)buffer[i + 3]); + + src <<= 2; + + uint32_t dest; + if (is_encoder) + dest = now_pos + (uint32_t)(i) + src; + else + dest = src - (now_pos + (uint32_t)(i)); + + dest >>= 2; + + dest = (((0 - ((dest >> 22) & 1)) << 22) & 0x3FFFFFFF) + | (dest & 0x3FFFFF) + | 0x40000000; + + buffer[i + 0] = (uint8_t)(dest >> 24); + buffer[i + 1] = (uint8_t)(dest >> 16); + buffer[i + 2] = (uint8_t)(dest >> 8); + buffer[i + 3] = (uint8_t)(dest); + } + } + + return i; +} + + +static lzma_ret +sparc_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, bool is_encoder) +{ + return lzma_simple_coder_init(next, allocator, filters, + &sparc_code, 0, 4, 4, is_encoder); +} + + +#ifdef HAVE_ENCODER_SPARC +extern lzma_ret +lzma_simple_sparc_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return sparc_coder_init(next, allocator, filters, true); +} +#endif + + +#ifdef HAVE_DECODER_SPARC +extern lzma_ret +lzma_simple_sparc_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return sparc_coder_init(next, allocator, filters, false); +} +#endif diff --git a/src/liblzma/simple/x86.c b/src/liblzma/simple/x86.c new file mode 100644 index 0000000..232b295 --- /dev/null +++ b/src/liblzma/simple/x86.c @@ -0,0 +1,163 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file x86.c +/// \brief Filter for x86 binaries (BCJ filter) +/// +// Authors: Igor Pavlov +// Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "simple_private.h" + + +#define Test86MSByte(b) ((b) == 0 || (b) == 0xFF) + + +typedef struct { + uint32_t prev_mask; + uint32_t prev_pos; +} lzma_simple_x86; + + +static size_t +x86_code(void *simple_ptr, uint32_t now_pos, bool is_encoder, + uint8_t *buffer, size_t size) +{ + static const bool MASK_TO_ALLOWED_STATUS[8] + = { true, true, true, false, true, false, false, false }; + + static const uint32_t MASK_TO_BIT_NUMBER[8] + = { 0, 1, 2, 2, 3, 3, 3, 3 }; + + lzma_simple_x86 *simple = simple_ptr; + uint32_t prev_mask = simple->prev_mask; + uint32_t prev_pos = simple->prev_pos; + + if (size < 5) + return 0; + + if (now_pos - prev_pos > 5) + prev_pos = now_pos - 5; + + const size_t limit = size - 5; + size_t buffer_pos = 0; + + while (buffer_pos <= limit) { + uint8_t b = buffer[buffer_pos]; + if (b != 0xE8 && b != 0xE9) { + ++buffer_pos; + continue; + } + + const uint32_t offset = now_pos + (uint32_t)(buffer_pos) + - prev_pos; + prev_pos = now_pos + (uint32_t)(buffer_pos); + + if (offset > 5) { + prev_mask = 0; + } else { + for (uint32_t i = 0; i < offset; ++i) { + prev_mask &= 0x77; + prev_mask <<= 1; + } + } + + b = buffer[buffer_pos + 4]; + + if (Test86MSByte(b) + && MASK_TO_ALLOWED_STATUS[(prev_mask >> 1) & 0x7] + && (prev_mask >> 1) < 0x10) { + + uint32_t src = ((uint32_t)(b) << 24) + | ((uint32_t)(buffer[buffer_pos + 3]) << 16) + | ((uint32_t)(buffer[buffer_pos + 2]) << 8) + | (buffer[buffer_pos + 1]); + + uint32_t dest; + while (true) { + if (is_encoder) + dest = src + (now_pos + (uint32_t)( + buffer_pos) + 5); + else + dest = src - (now_pos + (uint32_t)( + buffer_pos) + 5); + + if (prev_mask == 0) + break; + + const uint32_t i = MASK_TO_BIT_NUMBER[ + prev_mask >> 1]; + + b = (uint8_t)(dest >> (24 - i * 8)); + + if (!Test86MSByte(b)) + break; + + src = dest ^ ((1U << (32 - i * 8)) - 1); + } + + buffer[buffer_pos + 4] + = (uint8_t)(~(((dest >> 24) & 1) - 1)); + buffer[buffer_pos + 3] = (uint8_t)(dest >> 16); + buffer[buffer_pos + 2] = (uint8_t)(dest >> 8); + buffer[buffer_pos + 1] = (uint8_t)(dest); + buffer_pos += 5; + prev_mask = 0; + + } else { + ++buffer_pos; + prev_mask |= 1; + if (Test86MSByte(b)) + prev_mask |= 0x10; + } + } + + simple->prev_mask = prev_mask; + simple->prev_pos = prev_pos; + + return buffer_pos; +} + + +static lzma_ret +x86_coder_init(lzma_next_coder *next, const lzma_allocator *allocator, + const lzma_filter_info *filters, bool is_encoder) +{ + const lzma_ret ret = lzma_simple_coder_init(next, allocator, filters, + &x86_code, sizeof(lzma_simple_x86), 5, 1, is_encoder); + + if (ret == LZMA_OK) { + lzma_simple_coder *coder = next->coder; + lzma_simple_x86 *simple = coder->simple; + simple->prev_mask = 0; + simple->prev_pos = (uint32_t)(-5); + } + + return ret; +} + + +#ifdef HAVE_ENCODER_X86 +extern lzma_ret +lzma_simple_x86_encoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return x86_coder_init(next, allocator, filters, true); +} +#endif + + +#ifdef HAVE_DECODER_X86 +extern lzma_ret +lzma_simple_x86_decoder_init(lzma_next_coder *next, + const lzma_allocator *allocator, + const lzma_filter_info *filters) +{ + return x86_coder_init(next, allocator, filters, false); +} +#endif diff --git a/src/liblzma/validate_map.sh b/src/liblzma/validate_map.sh new file mode 100644 index 0000000..2bf6f8b --- /dev/null +++ b/src/liblzma/validate_map.sh @@ -0,0 +1,165 @@ +#!/bin/sh + +############################################################################### +# +# Check liblzma_*.map for certain types of errors. +# +# liblzma_generic.map is for FreeBSD and Solaris and possibly others +# except GNU/Linux. +# +# liblzma_linux.map is for GNU/Linux only. This and the matching extra code +# in the .c files make liblzma >= 5.2.7 compatible with binaries that were +# linked against ill-patched liblzma in RHEL/CentOS 7. By providing the +# compatibility in official XZ Utils release will hopefully prevent people +# from further copying the broken patch to other places when they want +# compatibility with binaries linked on RHEL/CentOS 7. The long version +# of the story: +# +# RHEL/CentOS 7 shipped with 5.1.2alpha, including the threaded +# encoder that is behind #ifdef LZMA_UNSTABLE in the API headers. +# In 5.1.2alpha these symbols are under XZ_5.1.2alpha in liblzma.map. +# API/ABI compatibility tracking isn't done between development +# releases so newer releases didn't have XZ_5.1.2alpha anymore. +# +# Later RHEL/CentOS 7 updated xz to 5.2.2 but they wanted to keep +# the exported symbols compatible with 5.1.2alpha. After checking +# the ABI changes it turned out that >= 5.2.0 ABI is backward +# compatible with the threaded encoder functions from 5.1.2alpha +# (but not vice versa as fixes and extensions to these functions +# were made between 5.1.2alpha and 5.2.0). +# +# In RHEL/CentOS 7, XZ Utils 5.2.2 was patched with +# xz-5.2.2-compat-libs.patch to modify liblzma.map: +# +# - XZ_5.1.2alpha was added with lzma_stream_encoder_mt and +# lzma_stream_encoder_mt_memusage. This matched XZ Utils 5.1.2alpha. +# +# - XZ_5.2 was replaced with XZ_5.2.2. It is clear that this was +# an error; the intention was to keep using XZ_5.2 (XZ_5.2.2 +# has never been used in XZ Utils). So XZ_5.2.2 lists all +# symbols that were listed under XZ_5.2 before the patch. +# lzma_stream_encoder_mt and _mt_memusage are included too so +# they are listed both here and under XZ_5.1.2alpha. +# +# The patch didn't add any __asm__(".symver ...") lines to the .c +# files. Thus the resulting liblzma.so exports the threaded encoder +# functions under XZ_5.1.2alpha only. Listing the two functions +# also under XZ_5.2.2 in liblzma.map has no effect without +# matching .symver lines. +# +# The lack of XZ_5.2 in RHEL/CentOS 7 means that binaries linked +# against unpatched XZ Utils 5.2.x won't run on RHEL/CentOS 7. +# This is unfortunate but this alone isn't too bad as the problem +# is contained within RHEL/CentOS 7 and doesn't affect users +# of other distributions. It could also be fixed internally in +# RHEL/CentOS 7. +# +# The second problem is more serious: In XZ Utils 5.2.2 the API +# headers don't have #ifdef LZMA_UNSTABLE for obvious reasons. +# This is true in RHEL/CentOS 7 version too. Thus now programs +# using new APIs can be compiled without an extra #define. However, +# the programs end up depending on symbol version XZ_5.1.2alpha +# (and possibly also XZ_5.2.2) instead of XZ_5.2 as they would +# with an unpatched XZ Utils 5.2.2. This means that such binaries +# won't run on other distributions shipping XZ Utils >= 5.2.0 as +# they don't provide XZ_5.1.2alpha or XZ_5.2.2; they only provide +# XZ_5.2 (and XZ_5.0). (This includes RHEL/CentOS 8 as the patch +# luckily isn't included there anymore with XZ Utils 5.2.4.) +# +# Binaries built by RHEL/CentOS 7 users get distributed and then +# people wonder why they don't run on some other distribution. +# Seems that people have found out about the patch and been copying +# it to some build scripts, seemingly curing the symptoms but +# actually spreading the illness further and outside RHEL/CentOS 7. +# Adding compatibility in an official XZ Utils release should work +# as a vaccine against this ill patch and stop it from spreading. +# The vaccine is kept GNU/Linux-only as other OSes should be immune +# (hopefully it hasn't spread via some build script to other OSes). +# +# Author: Lasse Collin +# +# This file has been put into the public domain. +# You can do whatever you want with this file. +# +############################################################################### + +LC_ALL=C +export LC_ALL + +STATUS=0 + +cd "$(dirname "$0")" + +# Get the list of symbols that aren't defined in liblzma_generic.map. +SYMS=$(sed -n 's/^extern LZMA_API([^)]*) \([a-z0-9_]*\)(.*$/\1;/p' \ + api/lzma/*.h \ + | sort \ + | grep -Fve "$(sed '/[{}:*]/d;/^$/d;s/^ //' liblzma_generic.map)") + +# Check that there are no old alpha or beta versions listed. +VER=$(cd ../.. && sh build-aux/version.sh) +NAMES= +case $VER in + *alpha | *beta) + NAMES=$(sed -n 's/^.*XZ_\([^ ]*\)\(alpha\|beta\) .*$/\1\2/p' \ + liblzma_generic.map | grep -Fv "$VER") + ;; +esac + +# Check for duplicate lines. It can catch missing dependencies. +DUPS=$(sort liblzma_generic.map | sed '/^$/d;/^global:$/d' | uniq -d) + +# Check that liblzma_linux.map is in sync with liblzma_generic.map. +# The RHEL/CentOS 7 compatibility symbols are in a fixed location +# so it makes it easy to remove them for comparison with liblzma_generic.map. +# +# NOTE: Putting XZ_5.2 before the compatibility symbols XZ_5.1.2alpha +# and XZ_5.2.2 in liblzma_linux.map is important: If liblzma_linux.map is +# incorrectly used without #define HAVE_SYMBOL_VERSIONS_LINUX, only the first +# occurrence of each function name will be used from liblzma_linux.map; +# the rest are ignored by the linker. Thus having XZ_5.2 before the +# compatibility symbols means that @@XZ_5.2 will be used for the symbols +# listed under XZ_5.2 {...} and the same function names later in +# the file under XZ_5.1.2alpha {...} and XZ_5.2.2 {...} will be +# ignored (@XZ_5.1.2alpha or @XZ_5.2.2 won't be added at all when +# the #define HAVE_SYMBOL_VERSIONS_LINUX isn't used). +IN_SYNC= +if ! sed '109,123d' liblzma_linux.map \ + | cmp -s - liblzma_generic.map; then + IN_SYNC=no +fi + +# Print error messages if needed. +if test -n "$SYMS$NAMES$DUPS$IN_SYNC"; then + echo + echo 'validate_map.sh found problems from liblzma_*.map:' + echo + + if test -n "$SYMS"; then + echo 'liblzma_generic.map lacks the following symbols:' + echo "$SYMS" + echo + fi + + if test -n "$NAMES"; then + echo 'Obsolete alpha or beta version names:' + echo "$NAMES" + echo + fi + + if test -n "$DUPS"; then + echo 'Duplicate lines:' + echo "$DUPS" + echo + fi + + if test -n "$IN_SYNC"; then + echo "liblzma_generic.map and liblzma_linux.map aren't in sync" + echo + fi + + STATUS=1 +fi + +# Exit status is 1 if problems were found, 0 otherwise. +exit "$STATUS" diff --git a/src/lzmainfo/Makefile.am b/src/lzmainfo/Makefile.am new file mode 100644 index 0000000..ff7172b --- /dev/null +++ b/src/lzmainfo/Makefile.am @@ -0,0 +1,39 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +bin_PROGRAMS = lzmainfo + +lzmainfo_SOURCES = \ + lzmainfo.c \ + ../common/tuklib_progname.c \ + ../common/tuklib_exit.c + +if COND_W32 +lzmainfo_SOURCES += lzmainfo_w32res.rc +endif + +lzmainfo_CPPFLAGS = \ + -DLOCALEDIR=\"$(localedir)\" \ + -I$(top_srcdir)/src/common \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_builddir)/lib + +lzmainfo_LDADD = $(top_builddir)/src/liblzma/liblzma.la + +if COND_GNULIB +lzmainfo_LDADD += $(top_builddir)/lib/libgnu.a +endif + +lzmainfo_LDADD += $(LTLIBINTL) + + +dist_man_MANS = lzmainfo.1 + +# Windows resource compiler support +.rc.o: + $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@ diff --git a/src/lzmainfo/Makefile.in b/src/lzmainfo/Makefile.in new file mode 100644 index 0000000..0a18942 --- /dev/null +++ b/src/lzmainfo/Makefile.in @@ -0,0 +1,837 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = lzmainfo$(EXEEXT) +@COND_W32_TRUE@am__append_1 = lzmainfo_w32res.rc +@COND_GNULIB_TRUE@am__append_2 = $(top_builddir)/lib/libgnu.a +subdir = src/lzmainfo +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_capsicum.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/getopt.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/posix-shell.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/tuklib_common.m4 \ + $(top_srcdir)/m4/tuklib_cpucores.m4 \ + $(top_srcdir)/m4/tuklib_integer.m4 \ + $(top_srcdir)/m4/tuklib_mbstr.m4 \ + $(top_srcdir)/m4/tuklib_physmem.m4 \ + $(top_srcdir)/m4/tuklib_progname.m4 \ + $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" +PROGRAMS = $(bin_PROGRAMS) +am__lzmainfo_SOURCES_DIST = lzmainfo.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c lzmainfo_w32res.rc +@COND_W32_TRUE@am__objects_1 = lzmainfo_w32res.$(OBJEXT) +am_lzmainfo_OBJECTS = lzmainfo-lzmainfo.$(OBJEXT) \ + lzmainfo-tuklib_progname.$(OBJEXT) \ + lzmainfo-tuklib_exit.$(OBJEXT) $(am__objects_1) +lzmainfo_OBJECTS = $(am_lzmainfo_OBJECTS) +am__DEPENDENCIES_1 = +lzmainfo_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \ + $(am__append_2) $(am__DEPENDENCIES_1) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/lzmainfo-lzmainfo.Po \ + ./$(DEPDIR)/lzmainfo-tuklib_exit.Po \ + ./$(DEPDIR)/lzmainfo-tuklib_progname.Po +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(lzmainfo_SOURCES) +DIST_SOURCES = $(am__lzmainfo_SOURCES_DIST) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(dist_man_MANS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \ + $(top_srcdir)/build-aux/depcomp +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAPSICUM_LIB = @CAPSICUM_LIB@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +GETOPT_H = @GETOPT_H@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +HAVE_VISIBILITY = @HAVE_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_EXEEXT = @LN_EXEEXT@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ +POSUB = @POSUB@ +PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +enable_path_for_scripts = @enable_path_for_scripts@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xz = @xz@ +lzmainfo_SOURCES = lzmainfo.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c $(am__append_1) +lzmainfo_CPPFLAGS = \ + -DLOCALEDIR=\"$(localedir)\" \ + -I$(top_srcdir)/src/common \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_builddir)/lib + +lzmainfo_LDADD = $(top_builddir)/src/liblzma/liblzma.la \ + $(am__append_2) $(LTLIBINTL) +dist_man_MANS = lzmainfo.1 +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj .rc +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/lzmainfo/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign src/lzmainfo/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +lzmainfo$(EXEEXT): $(lzmainfo_OBJECTS) $(lzmainfo_DEPENDENCIES) $(EXTRA_lzmainfo_DEPENDENCIES) + @rm -f lzmainfo$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(lzmainfo_OBJECTS) $(lzmainfo_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzmainfo-lzmainfo.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzmainfo-tuklib_exit.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzmainfo-tuklib_progname.Po@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +lzmainfo-lzmainfo.o: lzmainfo.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-lzmainfo.o -MD -MP -MF $(DEPDIR)/lzmainfo-lzmainfo.Tpo -c -o lzmainfo-lzmainfo.o `test -f 'lzmainfo.c' || echo '$(srcdir)/'`lzmainfo.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmainfo-lzmainfo.Tpo $(DEPDIR)/lzmainfo-lzmainfo.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzmainfo.c' object='lzmainfo-lzmainfo.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-lzmainfo.o `test -f 'lzmainfo.c' || echo '$(srcdir)/'`lzmainfo.c + +lzmainfo-lzmainfo.obj: lzmainfo.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-lzmainfo.obj -MD -MP -MF $(DEPDIR)/lzmainfo-lzmainfo.Tpo -c -o lzmainfo-lzmainfo.obj `if test -f 'lzmainfo.c'; then $(CYGPATH_W) 'lzmainfo.c'; else $(CYGPATH_W) '$(srcdir)/lzmainfo.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmainfo-lzmainfo.Tpo $(DEPDIR)/lzmainfo-lzmainfo.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lzmainfo.c' object='lzmainfo-lzmainfo.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-lzmainfo.obj `if test -f 'lzmainfo.c'; then $(CYGPATH_W) 'lzmainfo.c'; else $(CYGPATH_W) '$(srcdir)/lzmainfo.c'; fi` + +lzmainfo-tuklib_progname.o: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-tuklib_progname.o -MD -MP -MF $(DEPDIR)/lzmainfo-tuklib_progname.Tpo -c -o lzmainfo-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmainfo-tuklib_progname.Tpo $(DEPDIR)/lzmainfo-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='lzmainfo-tuklib_progname.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c + +lzmainfo-tuklib_progname.obj: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-tuklib_progname.obj -MD -MP -MF $(DEPDIR)/lzmainfo-tuklib_progname.Tpo -c -o lzmainfo-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmainfo-tuklib_progname.Tpo $(DEPDIR)/lzmainfo-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='lzmainfo-tuklib_progname.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` + +lzmainfo-tuklib_exit.o: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-tuklib_exit.o -MD -MP -MF $(DEPDIR)/lzmainfo-tuklib_exit.Tpo -c -o lzmainfo-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmainfo-tuklib_exit.Tpo $(DEPDIR)/lzmainfo-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='lzmainfo-tuklib_exit.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c + +lzmainfo-tuklib_exit.obj: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmainfo-tuklib_exit.obj -MD -MP -MF $(DEPDIR)/lzmainfo-tuklib_exit.Tpo -c -o lzmainfo-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmainfo-tuklib_exit.Tpo $(DEPDIR)/lzmainfo-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='lzmainfo-tuklib_exit.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmainfo-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-man1: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(MANS) +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f ./$(DEPDIR)/lzmainfo-lzmainfo.Po + -rm -f ./$(DEPDIR)/lzmainfo-tuklib_exit.Po + -rm -f ./$(DEPDIR)/lzmainfo-tuklib_progname.Po + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f ./$(DEPDIR)/lzmainfo-lzmainfo.Po + -rm -f ./$(DEPDIR)/lzmainfo-tuklib_exit.Po + -rm -f ./$(DEPDIR)/lzmainfo-tuklib_progname.Po + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-man + +uninstall-man: uninstall-man1 + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ + clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \ + ctags ctags-am distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-man1 \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \ + uninstall-binPROGRAMS uninstall-man uninstall-man1 + +.PRECIOUS: Makefile + + +# Windows resource compiler support +.rc.o: + $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(lzmainfo_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@ + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/lzmainfo/lzmainfo.1 b/src/lzmainfo/lzmainfo.1 new file mode 100644 index 0000000..ce38eee --- /dev/null +++ b/src/lzmainfo/lzmainfo.1 @@ -0,0 +1,60 @@ +.\" +.\" Author: Lasse Collin +.\" +.\" This file has been put into the public domain. +.\" You can do whatever you want with this file. +.\" +.TH LZMAINFO 1 "2013-06-30" "Tukaani" "XZ Utils" +.SH NAME +lzmainfo \- show information stored in the .lzma file header +.SH SYNOPSIS +.B lzmainfo +.RB [ \-\-help ] +.RB [ \-\-version ] +.RI [ file... ] +.SH DESCRIPTION +.B lzmainfo +shows information stored in the +.B .lzma +file header. +It reads the first 13 bytes from the specified +.IR file , +decodes the header, and prints it to standard output in human +readable format. +If no +.I files +are given or +.I file +is +.BR \- , +standard input is read. +.PP +Usually the most interesting information is +the uncompressed size and the dictionary size. +Uncompressed size can be shown only if +the file is in the non-streamed +.B .lzma +format variant. +The amount of memory required to decompress the file is +a few dozen kilobytes plus the dictionary size. +.PP +.B lzmainfo +is included in XZ Utils primarily for +backward compatibility with LZMA Utils. +.SH "EXIT STATUS" +.TP +.B 0 +All is good. +.TP +.B 1 +An error occurred. +.SH BUGS +.B lzmainfo +uses +.B MB +while the correct suffix would be +.B MiB +(2^20 bytes). +This is to keep the output compatible with LZMA Utils. +.SH "SEE ALSO" +.BR xz (1) diff --git a/src/lzmainfo/lzmainfo.c b/src/lzmainfo/lzmainfo.c new file mode 100644 index 0000000..b0ccdfb --- /dev/null +++ b/src/lzmainfo/lzmainfo.c @@ -0,0 +1,219 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file lzmainfo.c +/// \brief lzmainfo tool for compatibility with LZMA Utils +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "sysdefs.h" +#include +#include + +#include "lzma.h" +#include "getopt.h" +#include "tuklib_gettext.h" +#include "tuklib_progname.h" +#include "tuklib_exit.h" + +#ifdef TUKLIB_DOSLIKE +# include +# include +#endif + + +static void lzma_attribute((__noreturn__)) +help(void) +{ + printf( +_("Usage: %s [--help] [--version] [FILE]...\n" +"Show information stored in the .lzma file header"), progname); + + printf(_( +"\nWith no FILE, or when FILE is -, read standard input.\n")); + printf("\n"); + + printf(_("Report bugs to <%s> (in English or Finnish).\n"), + PACKAGE_BUGREPORT); + printf(_("%s home page: <%s>\n"), PACKAGE_NAME, PACKAGE_URL); + + tuklib_exit(EXIT_SUCCESS, EXIT_FAILURE, true); +} + + +static void lzma_attribute((__noreturn__)) +version(void) +{ + puts("lzmainfo (" PACKAGE_NAME ") " LZMA_VERSION_STRING); + tuklib_exit(EXIT_SUCCESS, EXIT_FAILURE, true); +} + + +/// Parse command line options. +static void +parse_args(int argc, char **argv) +{ + enum { + OPT_HELP, + OPT_VERSION, + }; + + static const struct option long_opts[] = { + { "help", no_argument, NULL, OPT_HELP }, + { "version", no_argument, NULL, OPT_VERSION }, + { NULL, 0, NULL, 0 } + }; + + int c; + while ((c = getopt_long(argc, argv, "", long_opts, NULL)) != -1) { + switch (c) { + case OPT_HELP: + help(); + + case OPT_VERSION: + version(); + + default: + exit(EXIT_FAILURE); + } + } + + return; +} + + +/// Primitive base-2 logarithm for integers +static uint32_t +my_log2(uint32_t n) +{ + uint32_t e; + for (e = 0; n > 1; ++e, n /= 2) ; + return e; +} + + +/// Parse the .lzma header and display information about it. +static bool +lzmainfo(const char *name, FILE *f) +{ + uint8_t buf[13]; + const size_t size = fread(buf, 1, sizeof(buf), f); + if (size != 13) { + fprintf(stderr, "%s: %s: %s\n", progname, name, + ferror(f) ? strerror(errno) + : _("File is too small to be a .lzma file")); + return true; + } + + lzma_filter filter = { .id = LZMA_FILTER_LZMA1 }; + + // Parse the first five bytes. + switch (lzma_properties_decode(&filter, NULL, buf, 5)) { + case LZMA_OK: + break; + + case LZMA_OPTIONS_ERROR: + fprintf(stderr, "%s: %s: %s\n", progname, name, + _("Not a .lzma file")); + return true; + + case LZMA_MEM_ERROR: + fprintf(stderr, "%s: %s\n", progname, strerror(ENOMEM)); + exit(EXIT_FAILURE); + + default: + fprintf(stderr, "%s: %s\n", progname, + _("Internal error (bug)")); + exit(EXIT_FAILURE); + } + + // Uncompressed size + uint64_t uncompressed_size = 0; + for (size_t i = 0; i < 8; ++i) + uncompressed_size |= (uint64_t)(buf[5 + i]) << (i * 8); + + // Display the results. We don't want to translate these and also + // will use MB instead of MiB, because someone could be parsing + // this output and we don't want to break that when people move + // from LZMA Utils to XZ Utils. + if (f != stdin) + printf("%s\n", name); + + printf("Uncompressed size: "); + if (uncompressed_size == UINT64_MAX) + printf("Unknown"); + else + printf("%" PRIu64 " MB (%" PRIu64 " bytes)", + (uncompressed_size + 512 * 1024) + / (1024 * 1024), + uncompressed_size); + + lzma_options_lzma *opt = filter.options; + + printf("\nDictionary size: " + "%" PRIu32 " MB (2^%" PRIu32 " bytes)\n" + "Literal context bits (lc): %" PRIu32 "\n" + "Literal pos bits (lp): %" PRIu32 "\n" + "Number of pos bits (pb): %" PRIu32 "\n", + (opt->dict_size + 512 * 1024) / (1024 * 1024), + my_log2(opt->dict_size), opt->lc, opt->lp, opt->pb); + + free(opt); + + return false; +} + + +extern int +main(int argc, char **argv) +{ + tuklib_progname_init(argv); + tuklib_gettext_init(PACKAGE, LOCALEDIR); + + parse_args(argc, argv); + +#ifdef TUKLIB_DOSLIKE + setmode(fileno(stdin), O_BINARY); +#endif + + int ret = EXIT_SUCCESS; + + // We print empty lines around the output only when reading from + // files specified on the command line. This is due to how + // LZMA Utils did it. + if (optind == argc) { + if (lzmainfo("(stdin)", stdin)) + ret = EXIT_FAILURE; + } else { + printf("\n"); + + do { + if (strcmp(argv[optind], "-") == 0) { + if (lzmainfo("(stdin)", stdin)) + ret = EXIT_FAILURE; + } else { + FILE *f = fopen(argv[optind], "r"); + if (f == NULL) { + ret = EXIT_FAILURE; + fprintf(stderr, "%s: %s: %s\n", + progname, + argv[optind], + strerror(errno)); + continue; + } + + if (lzmainfo(argv[optind], f)) + ret = EXIT_FAILURE; + + printf("\n"); + fclose(f); + } + } while (++optind < argc); + } + + tuklib_exit(ret, EXIT_FAILURE, true); +} diff --git a/src/lzmainfo/lzmainfo_w32res.rc b/src/lzmainfo/lzmainfo_w32res.rc new file mode 100644 index 0000000..378fbe6 --- /dev/null +++ b/src/lzmainfo/lzmainfo_w32res.rc @@ -0,0 +1,12 @@ +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#define MY_TYPE VFT_APP +#define MY_NAME "lzmainfo" +#define MY_SUFFIX ".exe" +#define MY_DESC "lzmainfo shows information about .lzma files" +#include "common_w32res.rc" diff --git a/src/scripts/Makefile.am b/src/scripts/Makefile.am new file mode 100644 index 0000000..fe5742d --- /dev/null +++ b/src/scripts/Makefile.am @@ -0,0 +1,89 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +nodist_bin_SCRIPTS = xzdiff xzgrep xzmore xzless +dist_man_MANS = xzdiff.1 xzgrep.1 xzmore.1 xzless.1 + +links = \ + xzdiff-xzcmp \ + xzgrep-xzegrep \ + xzgrep-xzfgrep + +if COND_LZMALINKS +links += \ + xzdiff-lzdiff \ + xzdiff-lzcmp \ + xzgrep-lzgrep \ + xzgrep-lzegrep \ + xzgrep-lzfgrep \ + xzmore-lzmore \ + xzless-lzless +endif + +install-exec-hook: + cd "$(DESTDIR)$(bindir)" && \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ + rm -f "$$link" && \ + $(LN_S) "$$target" "$$link"; \ + done + +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. +install-data-hook: + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in $$languages; do \ + mans= ; \ + for man in $(dist_man_MANS); do \ + man="$(top_srcdir)/po4a/man/$$lang/$$man" ; \ + if test -f "$$man"; then \ + mans="$$mans $$man"; \ + fi; \ + done; \ + $(MAKE) dist_man_MANS="$$mans" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + done; \ + for lang in . $$languages; do \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' \ + | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' \ + | sed '$(transform)'` && \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then ( \ + cd "$$man1dir" && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1" \ + ); fi; \ + done; \ + done + +uninstall-hook: + cd "$(DESTDIR)$(bindir)" && \ + for pair in $(links); do \ + link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ + rm -f "$$link"; \ + done + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' \ + | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' \ + | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$target.1" \ + "$(DESTDIR)$(mandir)/$$lang/man1/$$link.1"; \ + done; \ + done diff --git a/src/scripts/Makefile.in b/src/scripts/Makefile.in new file mode 100644 index 0000000..42dbfff --- /dev/null +++ b/src/scripts/Makefile.in @@ -0,0 +1,700 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@COND_LZMALINKS_TRUE@am__append_1 = \ +@COND_LZMALINKS_TRUE@ xzdiff-lzdiff \ +@COND_LZMALINKS_TRUE@ xzdiff-lzcmp \ +@COND_LZMALINKS_TRUE@ xzgrep-lzgrep \ +@COND_LZMALINKS_TRUE@ xzgrep-lzegrep \ +@COND_LZMALINKS_TRUE@ xzgrep-lzfgrep \ +@COND_LZMALINKS_TRUE@ xzmore-lzmore \ +@COND_LZMALINKS_TRUE@ xzless-lzless + +subdir = src/scripts +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_capsicum.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/getopt.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/posix-shell.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/tuklib_common.m4 \ + $(top_srcdir)/m4/tuklib_cpucores.m4 \ + $(top_srcdir)/m4/tuklib_integer.m4 \ + $(top_srcdir)/m4/tuklib_mbstr.m4 \ + $(top_srcdir)/m4/tuklib_physmem.m4 \ + $(top_srcdir)/m4/tuklib_progname.m4 \ + $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = xzdiff xzgrep xzmore xzless +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" +SCRIPTS = $(nodist_bin_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(dist_man_MANS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \ + $(srcdir)/xzdiff.in $(srcdir)/xzgrep.in $(srcdir)/xzless.in \ + $(srcdir)/xzmore.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAPSICUM_LIB = @CAPSICUM_LIB@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +GETOPT_H = @GETOPT_H@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +HAVE_VISIBILITY = @HAVE_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_EXEEXT = @LN_EXEEXT@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ +POSUB = @POSUB@ +PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +enable_path_for_scripts = @enable_path_for_scripts@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xz = @xz@ +nodist_bin_SCRIPTS = xzdiff xzgrep xzmore xzless +dist_man_MANS = xzdiff.1 xzgrep.1 xzmore.1 xzless.1 +links = xzdiff-xzcmp xzgrep-xzegrep xzgrep-xzfgrep $(am__append_1) +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/scripts/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign src/scripts/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +xzdiff: $(top_builddir)/config.status $(srcdir)/xzdiff.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +xzgrep: $(top_builddir)/config.status $(srcdir)/xzgrep.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +xzmore: $(top_builddir)/config.status $(srcdir)/xzmore.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +xzless: $(top_builddir)/config.status $(srcdir)/xzless.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +install-nodist_binSCRIPTS: $(nodist_bin_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-nodist_binSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-man1: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) $(MANS) +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-nodist_binSCRIPTS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-exec-hook +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-man uninstall-nodist_binSCRIPTS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook +uninstall-man: uninstall-man1 + +.MAKE: install-am install-data-am install-exec-am install-strip \ + uninstall-am + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-data-hook install-dvi install-dvi-am install-exec \ + install-exec-am install-exec-hook install-html install-html-am \ + install-info install-info-am install-man install-man1 \ + install-nodist_binSCRIPTS install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ + uninstall-am uninstall-hook uninstall-man uninstall-man1 \ + uninstall-nodist_binSCRIPTS + +.PRECIOUS: Makefile + + +install-exec-hook: + cd "$(DESTDIR)$(bindir)" && \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ + rm -f "$$link" && \ + $(LN_S) "$$target" "$$link"; \ + done + +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. +install-data-hook: + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in $$languages; do \ + mans= ; \ + for man in $(dist_man_MANS); do \ + man="$(top_srcdir)/po4a/man/$$lang/$$man" ; \ + if test -f "$$man"; then \ + mans="$$mans $$man"; \ + fi; \ + done; \ + $(MAKE) dist_man_MANS="$$mans" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + done; \ + for lang in . $$languages; do \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' \ + | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' \ + | sed '$(transform)'` && \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then ( \ + cd "$$man1dir" && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1" \ + ); fi; \ + done; \ + done + +uninstall-hook: + cd "$(DESTDIR)$(bindir)" && \ + for pair in $(links); do \ + link=`echo $$pair | sed 's/^.*-//' | sed '$(transform)'` && \ + rm -f "$$link"; \ + done + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for pair in $(links); do \ + target=`echo $$pair | sed 's/-.*$$//' \ + | sed '$(transform)'` && \ + link=`echo $$pair | sed 's/^.*-//' \ + | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$target.1" \ + "$(DESTDIR)$(mandir)/$$lang/man1/$$link.1"; \ + done; \ + done + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/scripts/xzdiff.1 b/src/scripts/xzdiff.1 new file mode 100644 index 0000000..24fed68 --- /dev/null +++ b/src/scripts/xzdiff.1 @@ -0,0 +1,79 @@ +.\" +.\" Original zdiff.1 for gzip: Jean-loup Gailly +.\" +.\" Modifications for XZ Utils: Lasse Collin +.\" Andrew Dudman +.\" +.\" License: GNU GPLv2+ +.\" +.TH XZDIFF 1 "2021-06-04" "Tukaani" "XZ Utils" +.SH NAME +xzcmp, xzdiff, lzcmp, lzdiff \- compare compressed files +.SH SYNOPSIS +.B xzcmp +.RI [ cmp_options "] " file1 " [" file2 ] +.br +.B xzdiff +.RI [ diff_options "] " file1 " [" file2 ] +.br +.B lzcmp +.RI [ cmp_options "] " file1 " [" file2 ] +.br +.B lzdiff +.RI [ diff_options "] " file1 " [" file2 ] +.SH DESCRIPTION +.B xzcmp +and +.B xzdiff +invoke +.BR cmp (1) +or +.BR diff (1) +on files compressed with +.BR xz (1), +.BR lzma (1), +.BR gzip (1), +.BR bzip2 (1), +.BR lzop (1), +or +.BR zstd (1). +All options specified are passed directly to +.BR cmp (1) +or +.BR diff (1). +If only one file is specified, then the files compared are +.I file1 +(which must have a suffix of a supported compression format) and +.I file1 +from which the compression format suffix has been stripped. +If two files are specified, +then they are uncompressed if necessary and fed to +.BR cmp (1) +or +.BR diff (1). +The exit status from +.BR cmp (1) +or +.BR diff (1) +is preserved unless a decompression error occurs; then exit status is 2. +.PP +The names +.B lzcmp +and +.B lzdiff +are provided for backward compatibility with LZMA Utils. +.SH "SEE ALSO" +.BR cmp (1), +.BR diff (1), +.BR xz (1), +.BR gzip (1), +.BR bzip2 (1), +.BR lzop (1), +.BR zstd (1), +.BR zdiff (1) +.SH BUGS +Messages from the +.BR cmp (1) +or +.BR diff (1) +programs refer to temporary filenames instead of those specified. diff --git a/src/scripts/xzdiff.in b/src/scripts/xzdiff.in new file mode 100644 index 0000000..c17d78b --- /dev/null +++ b/src/scripts/xzdiff.in @@ -0,0 +1,215 @@ +#!@POSIX_SHELL@ + +# Copyright (C) 1998, 2002, 2006, 2007 Free Software Foundation +# Copyright (C) 1993 Jean-loup Gailly + +# Modified for XZ Utils by Andrew Dudman and Lasse Collin. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +@enable_path_for_scripts@ +#SET_PATH - This line is a placeholder to ease patching this script. + +# Instead of unsetting XZ_OPT, just make sure that xz will use file format +# autodetection. This way memory usage limit and thread limit can be +# specified via XZ_OPT. With gzip, bzip2, and lzop it's OK to just unset the +# environment variables. +xz='@xz@ --format=auto' +unset GZIP BZIP BZIP2 LZOP + +case ${0##*/} in + *cmp*) prog=xzcmp; cmp=${CMP:-cmp};; + *) prog=xzdiff; cmp=${DIFF:-diff};; +esac + +version="$prog (@PACKAGE_NAME@) @VERSION@" + +usage="Usage: ${0##*/} [OPTION]... FILE1 [FILE2] +Compare FILE1 to FILE2, using their uncompressed contents if they are +compressed. If FILE2 is omitted, then the files compared are FILE1 and +FILE1 from which the compression format suffix has been stripped. + +Do comparisons like '$cmp' does. OPTIONs are the same as for '$cmp'. + +Report bugs to <@PACKAGE_BUGREPORT@>." + +# sed script to escape all ' for the shell, and then (to handle trailing +# newlines correctly) turn trailing X on last line into '. +escape=' + s/'\''/'\''\\'\'''\''/g + $s/X$/'\''/ +' + +while :; do + case $1 in + --h*) printf '%s\n' "$usage" || exit 2; exit;; + --v*) printf '%s\n' "$version" || exit 2; exit;; + --) shift; break;; + -*\'*) cmp="$cmp '"`printf '%sX\n' "$1" | sed "$escape"`;; + -?*) cmp="$cmp '$1'";; + *) break;; + esac + shift +done +cmp="$cmp --" + +for file; do + test "X$file" = X- || <"$file" || exit 2 +done + +# xz needs -qQ to ignore warnings like unsupported check type. +xz1="$xz -qQ" +xz2="$xz -qQ" +xz_status=0 +exec 3>&1 + +if test $# -eq 1; then + case $1 in + *[-.]xz | *[-.]lzma | *[-.]lz | *.t[lx]z) + ;; + *[-.]bz2 | *.tbz | *.tbz2) + xz1=bzip2;; + *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) + xz1=gzip;; + *[-.]lzo | *.tzo) + xz1=lzop;; + *[-.]zst | *.tzst) + xz1='zstd -q';; + *) + printf '%s\n' "$0: $1: Unknown compressed file name suffix" >&2 + exit 2;; + esac + case $1 in + *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *[-.]lz | *[-.]lzo | *[-.]zst) + FILE=`expr "X$1" : 'X\(.*\)[-.][abglmostxzZ2]*$'`;; + *.t[abglx]z) + FILE=`expr "X$1" : 'X\(.*[-.]t\)[abglx]z$'`ar;; + *.tbz2) + FILE=`expr "X$1" : 'X\(.*[-.]t\)bz2$'`ar;; + *.tzo) + FILE=`expr "X$1" : 'X\(.*[-.]t\)zo$'`ar;; + *.tzst) + FILE=`expr "X$1" : 'X\(.*[-.]t\)zst$'`ar;; + esac + xz_status=$( + exec 4>&1 + ($xz1 -cd -- "$1" 4>&-; echo $? >&4) 3>&- | eval "$cmp" - '"$FILE"' >&3 + ) +elif test $# -eq 2; then + case $1 in + *[-.]bz2 | *.tbz | *.tbz2) xz1=bzip2;; + *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) xz1=gzip;; + *[-.]lzo | *.tzo) xz1=lzop;; + *[-.]zst | *.tzst) xz1='zstd -q';; + esac + case $2 in + *[-.]bz2 | *.tbz | *.tbz2) xz2=bzip2;; + *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) xz2=gzip;; + *[-.]lzo | *.tzo) xz2=lzop;; + *[-.]zst | *.tzst) xz2='zstd -q';; + esac + case $1 in + *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *[-.]lz | *.t[abglx]z | *.tbz2 | *[-.]lzo | *.tzo | *[-.]zst | *.tzst | -) + case "$2" in + *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *[-.]lz | *.t[abglx]z | *.tbz2 | *[-.]lzo | *.tzo | *[-.]zst | *.tzst | -) + if test "$1$2" = --; then + xz_status=$( + exec 4>&1 + ($xz1 -cdf - 4>&-; echo $? >&4) 3>&- | + eval "$cmp" - - >&3 + ) + elif # Reject Solaris 8's buggy /bin/bash 2.03. + echo X | (echo X | eval "$cmp" /dev/fd/5 - >/dev/null 2>&1) 5<&0; then + # NOTE: xz_status will contain two numbers. + xz_status=$( + exec 4>&1 + ($xz1 -cdf -- "$1" 4>&-; echo $? >&4) 3>&- | + ( ($xz2 -cdf -- "$2" 4>&-; echo $? >&4) 3>&- 5<&- &3) 5<&0 + ) + else + F=`expr "/$2" : '.*/\(.*\)[-.][ablmotxz2]*$'` || F=$prog + tmp= + trap ' + test -n "$tmp" && rm -rf "$tmp" + (exit 2); exit 2 + ' HUP INT PIPE TERM 0 + if type mktemp >/dev/null 2>&1; then + # Note that FreeBSD's mktemp isn't fully compatible with + # the implementations from mktemp.org and GNU coreutils. + # It is important that the -t argument is the last argument + # and that no "--" is used between -t and the template argument. + # This way this command works on all implementations. + tmp=`mktemp -d -t "$prog.XXXXXXXXXX"` || exit 2 + else + # Fallback code if mktemp is missing. This isn't as + # robust as using mktemp since this doesn't try with + # different file names in case of a file name conflict. + # + # There's no need to save the original umask since + # we don't create any non-temp files. Note that using + # mkdir -m 0077 isn't secure since some mkdir implementations + # create the dir with the default umask and chmod the + # the dir afterwards. + umask 0077 + mkdir -- "${TMPDIR-/tmp}/$prog.$$" || exit 2 + tmp="${TMPDIR-/tmp}/$prog.$$" + fi + $xz2 -cdf -- "$2" > "$tmp/$F" || exit 2 + xz_status=$( + exec 4>&1 + ($xz1 -cdf -- "$1" 4>&-; echo $? >&4) 3>&- | + eval "$cmp" - '"$tmp/$F"' >&3 + ) + cmp_status=$? + rm -rf "$tmp" || xz_status=$? + trap - HUP INT PIPE TERM 0 + (exit $cmp_status) + fi;; + *) + xz_status=$( + exec 4>&1 + ($xz1 -cdf -- "$1" 4>&-; echo $? >&4) 3>&- | + eval "$cmp" - '"$2"' >&3 + );; + esac;; + *) + case "$2" in + *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *[-.]lz | *.t[abglx]z | *.tbz2 | *[-.]lzo | *.tzo | *[-.]zst | *.tzst | -) + xz_status=$( + exec 4>&1 + ($xz2 -cdf -- "$2" 4>&-; echo $? >&4) 3>&- | + eval "$cmp" '"$1"' - >&3 + );; + *) + eval "$cmp" '"$1"' '"$2"';; + esac;; + esac +else + printf '%s\n' "$0: Invalid number of operands; try \`${0##*/} --help' for help" >&2 + exit 2 +fi + +cmp_status=$? +for num in $xz_status ; do + # 0 from decompressor means successful decompression. SIGPIPE from + # decompressor is possible when diff or cmp exits before the whole file + # has been decompressed. In that case we want to retain the exit status + # from diff or cmp. Note that using "trap '' PIPE" is not possible + # because gzip changes its behavior (including exit status) if SIGPIPE + # is ignored. + test "$num" -eq 0 && continue + test "$num" -ge 128 \ + && test "$(kill -l "$num" 2> /dev/null)" = "PIPE" \ + && continue + exit 2 +done +exit $cmp_status diff --git a/src/scripts/xzgrep.1 b/src/scripts/xzgrep.1 new file mode 100644 index 0000000..e0514b8 --- /dev/null +++ b/src/scripts/xzgrep.1 @@ -0,0 +1,113 @@ +.\" +.\" Original zgrep.1 for gzip: Jean-loup Gailly +.\" Charles Levert +.\" +.\" Modifications for XZ Utils: Lasse Collin +.\" +.\" License: GNU GPLv2+ +.\" +.TH XZGREP 1 "2022-07-19" "Tukaani" "XZ Utils" +.SH NAME +xzgrep \- search compressed files for a regular expression +.SH SYNOPSIS +.B xzgrep +.RI [ grep_options ] +.RB [ \-e ] +.I pattern +.RI [ file... ] +.br +.B xzegrep +\&... +.br +.B xzfgrep +\&... +.br +.B lzgrep +\&... +.br +.B lzegrep +\&... +.br +.B lzfgrep +\&... +.SH DESCRIPTION +.B xzgrep +invokes +.BR grep (1) +on +.I files +which may be either uncompressed or compressed with +.BR xz (1), +.BR lzma (1), +.BR gzip (1), +.BR bzip2 (1), +.BR lzop (1), +or +.BR zstd (1). +All options specified are passed directly to +.BR grep (1). +.PP +If no +.I file +is specified, then standard input is decompressed if necessary +and fed to +.BR grep (1). +When reading from standard input, +.BR gzip (1), +.BR bzip2 (1), +.BR lzop (1), +and +.BR zstd (1) +compressed files are not supported. +.PP +If +.B xzgrep +is invoked as +.B xzegrep +or +.B xzfgrep +then +.B grep \-E +or +.B grep \-F +is used instead of +.BR grep (1). +The same applies to names +.BR lzgrep , +.BR lzegrep , +and +.BR lzfgrep , +which are provided for backward compatibility with LZMA Utils. +.SH EXIT STATUS +.TP +0 +At least one match was found from at least one of the input files. +No errors occurred. +.TP +1 +No matches were found from any of the input files. +No errors occurred. +.TP +>1 +One or more errors occurred. +It is unknown if matches were found. +.SH ENVIRONMENT +.TP +.B GREP +If the +.B GREP +environment variable is set, +.B xzgrep +uses it instead of +.BR grep (1), +.BR "grep \-E" , +or +.BR "grep \-F" . +.SH "SEE ALSO" +.BR grep (1), +.BR xz (1), +.BR gzip (1), +.BR bzip2 (1), +.BR lzop (1), +.BR zstd (1), +.BR zgrep (1) diff --git a/src/scripts/xzgrep.in b/src/scripts/xzgrep.in new file mode 100644 index 0000000..490e47d --- /dev/null +++ b/src/scripts/xzgrep.in @@ -0,0 +1,298 @@ +#!@POSIX_SHELL@ + +# xzgrep -- a wrapper around a grep program that decompresses files as needed +# Adapted from a version sent by Charles Levert + +# Copyright (C) 1998, 2001, 2002, 2006, 2007 Free Software Foundation +# Copyright (C) 1993 Jean-loup Gailly + +# Modified for XZ Utils by Andrew Dudman and Lasse Collin. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +@enable_path_for_scripts@ +#SET_PATH - This line is a placeholder to ease patching this script. + +# Instead of unsetting XZ_OPT, just make sure that xz will use file format +# autodetection. This way memory usage limit and thread limit can be +# specified via XZ_OPT. With gzip, bzip2, and lzop it's OK to just unset the +# environment variables. +xz='@xz@ --format=auto' +unset GZIP BZIP BZIP2 LZOP + +case ${0##*/} in + *egrep*) prog=xzegrep; grep=${GREP:-grep -E};; + *fgrep*) prog=xzfgrep; grep=${GREP:-grep -F};; + *) prog=xzgrep; grep=${GREP:-grep};; +esac + +version="$prog (@PACKAGE_NAME@) @VERSION@" + +usage="Usage: ${0##*/} [OPTION]... [-e] PATTERN [FILE]... +Look for instances of PATTERN in the input FILEs, using their +uncompressed contents if they are compressed. + +OPTIONs are the same as for '$grep'. + +Report bugs to <@PACKAGE_BUGREPORT@>." + +# sed script to escape all ' for the shell, and then (to handle trailing +# newlines correctly) turn trailing X on last line into '. +escape=' + s/'\''/'\''\\'\'''\''/g + $s/X$/'\''/ +' +operands= +have_pat=0 +files_with_matches=0 +files_without_matches=0 +no_filename=0 +with_filename=0 + +# See if -H and --label options are supported (GNU and *BSDs). +if test f:x = "$(eval "echo x | $grep -H --label=f x 2> /dev/null")"; then + grep_supports_label=1 +else + grep_supports_label=0 +fi + +while test $# -ne 0; do + option=$1 + shift + optarg= + + case $option in + (-[0123456789abcdEFGhHiIKlLnoPqrRsTuUvVwxyzZ]*[!0123456789]*) + # Something like -Fiv was specified, that is, $option contains more + # than one option of which the first option (in this example -F) + # doesn't take an argument. Split the first option into a standalone + # argument and continue parsing the rest of the options (in this example, + # replace -Fiv with -iv in the argument list and set option=-F). + # + # If there are digits [0-9] they are treated as if they were a single + # option character because this syntax is an alias for -C for GNU grep. + # For example, "grep -25F" is equivalent to "grep -C25 -F". If only + # digits are specified like "grep -25" we don't get here because the + # above pattern in the case-statement doesn't match such strings. + arg2=-\'$(LC_ALL=C expr "X${option}X" : 'X-.[0-9]*\(.*\)' | + LC_ALL=C sed "$escape") + eval "set -- $arg2 "'${1+"$@"}' + option=$(LC_ALL=C expr "X$option" : 'X\(-.[0-9]*\)');; + (--binary-*=* | --[lm]a*=* | --reg*=*) + # These options require an argument and an argument has been provided + # with the --foo=argument syntax. All is good. + ;; + (-[ABCDefmX] | --binary-* | --file | --[lm]a* | --reg*) + # These options require an argument which should now be in $1. + # If it isn't, display an error and exit. + case ${1?"$option option requires an argument"} in + (*\'*) + optarg=" '"$(printf '%sX\n' "$1" | LC_ALL=C sed "$escape");; + (*) + optarg=" '$1'";; + esac + shift;; + (--) + break;; + (-?*) + ;; + (*) + case $option in + (*\'*) + operands="$operands '"$(printf '%sX\n' "$option" | + LC_ALL=C sed "$escape");; + (*) + operands="$operands '$option'";; + esac + ${POSIXLY_CORRECT+break} + continue;; + esac + + case $option in + (-[drRzZ] | --di* | --exc* | --inc* | --rec* | --nu*) + printf >&2 '%s: %s: Option not supported\n' "$0" "$option" + exit 2;; + (-[ef]* | --file | --file=* | --reg*) + have_pat=1;; + (--h | --he | --hel | --help) + printf '%s\n' "$usage" || exit 2 + exit;; + (-H | --wi | --wit | --with | --with- | --with-f | --with-fi \ + | --with-fil | --with-file | --with-filen | --with-filena | --with-filenam \ + | --with-filename) + with_filename=1 + continue;; + (-l | --files-with-*) + files_with_matches=1 + continue;; + (-L | --files-witho*) + files_without_matches=1 + continue;; + (-h | --no-f*) + no_filename=1;; + (-V | --v | --ve | --ver | --vers | --versi | --versio | --version) + printf '%s\n' "$version" || exit 2 + exit;; + esac + + case $option in + (*\'?*) + option=\'$(printf '%sX\n' "$option" | LC_ALL=C sed "$escape");; + (*) + option="'$option'";; + esac + + grep="$grep $option$optarg" +done + +eval "set -- $operands "'${1+"$@"}' + +if test $have_pat -eq 0; then + case ${1?"Missing pattern; try \`${0##*/} --help' for help"} in + (*\'*) + grep="$grep -e '"$(printf '%sX\n' "$1" | LC_ALL=C sed "$escape");; + (*) + grep="$grep -e '$1'";; + esac + shift +fi + +if test $# -eq 0; then + set -- - +fi + +exec 3>&1 + +# res=1 means that no file matched yet +res=1 + +for i; do + case $i in + *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) uncompress="gzip -cdf";; + *[-.]bz2 | *[-.]tbz | *.tbz2) uncompress="bzip2 -cdf";; + *[-.]lzo | *[-.]tzo) uncompress="lzop -cdf";; + *[-.]zst | *[-.]tzst) uncompress="zstd -cdfq";; # zstd needs -q. + *) uncompress="$xz -cdfqQ";; # -qQ to ignore warnings like unsupp. check. + esac + # xz_status will hold the decompressor's exit status. + # Exit status of grep (and in rare cases, printf or sed) is + # available as the exit status of this assignment command. + xz_status=$( + exec 5>&1 + ($uncompress -- "$i" 5>&-; echo $? >&5) 3>&- | + if test $files_with_matches -eq 1; then + eval "$grep -q" && { printf '%s\n' "$i" || exit 2; } + elif test $files_without_matches -eq 1; then + eval "$grep -q" || { + r=$? + if test $r -eq 1; then + printf '%s\n' "$i" || r=2 + fi + exit $r + } + elif test $with_filename -eq 0 && + { test $# -eq 1 || test $no_filename -eq 1; }; then + eval "$grep" + elif test $grep_supports_label -eq 1; then + # The grep implementation in use allows us to specify the filename + # that grep will prefix to the output lines. This is faster and + # less prone to security bugs than the fallback method that uses sed. + # This also avoids confusing output with GNU grep >= 3.5 (2020-09-27) + # which prints "binary file matches" to stderr instead of stdout. + # + # If reading from stdin, let grep use whatever name it prefers for + # stdin. With GNU grep it is a locale-specific translated string. + if test "x$i" = "x-"; then + eval "$grep -H" + else + eval "$grep -H --label \"\$i\"" + fi + else + # Append a colon so that the last character will never be a newline + # which would otherwise get lost in shell command substitution. + i="$i:" + + # Escape & \ | and newlines only if such characters are present + # (speed optimization). + case $i in + (*' +'* | *'&'* | *'\'* | *'|'*) + # If sed fails, set i to a known safe string to ensure that + # failing sed did not create a half-escaped dangerous string. + i=$(printf '%s\n' "$i" | LC_ALL=C sed 's/[&\|]/\\&/g; $!s/$/\\/') || + i='(unknown filename):';; + esac + + # $i already ends with a colon so do not add it here. + sed_script="s|^|$i|" + + # If grep or sed fails, pick the larger value of the two exit statuses. + # If sed fails, use at least 2 since we use >= 2 to indicate errors. + r=$( + exec 4>&1 + (eval "$grep" 4>&-; echo $? >&4) 3>&- | + LC_ALL=C sed "$sed_script" >&3 4>&- + ) || { + sed_status=$? + test "$sed_status" -lt 2 && sed_status=2 + test "$r" -lt "$sed_status" && r=$sed_status + } + exit $r + fi >&3 5>&- + ) + r=$? + + # If grep or sed or other non-decompression command failed with a signal, + # exit immediately and ignore the possible remaining files. + # + # NOTE: Instead of 128 + signal_number, some shells use + # 256 + signal_number (ksh) or 384 + signal_number (yash). + # This is fine for us since their "exit" and "kill -l" commands take + # this into account. (At least the versions I tried do but there is + # a report of an old ksh variant whose "exit" truncates the exit status + # to 8 bits without any special handling for values indicating a signal.) + test "$r" -ge 128 && exit "$r" + + if test -z "$xz_status"; then + # Something unusual happened, for example, we got a signal and + # the exit status of the decompressor was never echoed and thus + # $xz_status is empty. Exit immediately and ignore the possible + # remaining files. + exit 2 + elif test "$xz_status" -ge 128; then + # The decompressor died due to a signal. SIGPIPE is ignored since it can + # occur if grep exits before the whole file has been decompressed (grep -q + # can do that). If the decompressor died with some other signal, exit + # immediately and ignore the possible remaining files. + test "$(kill -l "$xz_status" 2> /dev/null)" != "PIPE" && exit "$xz_status" + elif test "$xz_status" -gt 0; then + # Decompression failed but we will continue with the remaining + # files anwyway. Set exit status to at least 2 to indicate an error. + test "$r" -lt 2 && r=2 + fi + + # Since res=1 is the initial value, we only need to care about + # matches (r == 0) and errors (r >= 2) here; r == 1 can be ignored. + if test "$r" -ge 2; then + # An error occurred in decompressor, grep, or some other command. Update + # res unless a larger error code has been seen with an earlier file. + test "$res" -lt "$r" && res=$r + elif test "$r" -eq 0; then + # grep found a match and no errors occurred. Update res if no errors have + # occurred with earlier files. + test "$res" -eq 1 && res=0 + fi +done + +# 0: At least one file matched and no errors occurred. +# 1: No matches were found and no errors occurred. +# >=2: Error. It's unknown if matches were found. +exit "$res" diff --git a/src/scripts/xzless.1 b/src/scripts/xzless.1 new file mode 100644 index 0000000..2d05459 --- /dev/null +++ b/src/scripts/xzless.1 @@ -0,0 +1,69 @@ +.\" +.\" Authors: Andrew Dudman +.\" Lasse Collin +.\" +.\" This file has been put into the public domain. +.\" You can do whatever you want with this file. +.\" +.\" (Note that this file is not based on gzip's zless.1.) +.\" +.TH XZLESS 1 "2010-09-27" "Tukaani" "XZ Utils" +.SH NAME +xzless, lzless \- view xz or lzma compressed (text) files +.SH SYNOPSIS +.B xzless +.RI [ file ...] +.br +.B lzless +.RI [ file ...] +.SH DESCRIPTION +.B xzless +is a filter that displays text from compressed files to a terminal. +It works on files compressed with +.BR xz (1) +or +.BR lzma (1). +If no +.I files +are given, +.B xzless +reads from standard input. +.PP +.B xzless +uses +.BR less (1) +to present its output. +Unlike +.BR xzmore , +its choice of pager cannot be altered by +setting an environment variable. +Commands are based on both +.BR more (1) +and +.BR vi (1) +and allow back and forth movement and searching. +See the +.BR less (1) +manual for more information. +.PP +The command named +.B lzless +is provided for backward compatibility with LZMA Utils. +.SH ENVIRONMENT +.TP +.B LESSMETACHARS +A list of characters special to the shell. +Set by +.B xzless +unless it is already set in the environment. +.TP +.B LESSOPEN +Set to a command line to invoke the +.BR xz (1) +decompressor for preprocessing the input files to +.BR less (1). +.SH "SEE ALSO" +.BR less (1), +.BR xz (1), +.BR xzmore (1), +.BR zless (1) diff --git a/src/scripts/xzless.in b/src/scripts/xzless.in new file mode 100644 index 0000000..79a849e --- /dev/null +++ b/src/scripts/xzless.in @@ -0,0 +1,59 @@ +#!@POSIX_SHELL@ + +# Copyright (C) 1998, 2002, 2006, 2007 Free Software Foundation + +# The original version for gzip was written by Paul Eggert. +# Modified for XZ Utils by Andrew Dudman and Lasse Collin. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +@enable_path_for_scripts@ +#SET_PATH - This line is a placeholder to ease patching this script. + +# Instead of unsetting XZ_OPT, just make sure that xz will use file format +# autodetection. This way memory usage limit and thread limit can be +# specified via XZ_OPT. +xz='@xz@ --format=auto' + +version='xzless (@PACKAGE_NAME@) @VERSION@' + +usage="Usage: ${0##*/} [OPTION]... [FILE]... +Like 'less', but operate on the uncompressed contents of xz compressed FILEs. + +Options are the same as for 'less'. + +Report bugs to <@PACKAGE_BUGREPORT@>." + +case $1 in + --help) printf '%s\n' "$usage" || exit 2; exit;; + --version) printf '%s\n' "$version" || exit 2; exit;; +esac + +if test "${LESSMETACHARS+set}" != set; then + # Work around a bug in less 394 and earlier; + # it mishandles the metacharacters '$%=~'. + space=' ' + tab=' ' + nl=' +' + LESSMETACHARS="$space$tab$nl'"';*?"()<>[|&^`#\$%=~' +fi + +if test "$(less -V | { read _ ver _ && echo ${ver%%.*}; })" -ge 429; then + # less 429 or later: LESSOPEN pipe will be used on + # standard input if $LESSOPEN begins with |-. + LESSOPEN="|-$xz -cdfqQ -- %s" +else + LESSOPEN="|$xz -cdfqQ -- %s" +fi +export LESSMETACHARS LESSOPEN + +exec less "$@" diff --git a/src/scripts/xzmore.1 b/src/scripts/xzmore.1 new file mode 100644 index 0000000..9613974 --- /dev/null +++ b/src/scripts/xzmore.1 @@ -0,0 +1,55 @@ +.\" +.\" Original zdiff.1 for gzip: Jean-loup Gailly +.\" Modifications for XZ Utils: Lasse Collin +.\" +.\" License: GNU GPLv2+ +.\" +.TH XZMORE 1 "2013-06-30" "Tukaani" "XZ Utils" +.SH NAME +xzmore, lzmore \- view xz or lzma compressed (text) files +.SH SYNOPSIS +.B xzmore +.RI [ file... ] +.br +.B lzmore +.RI [ file... ] +.SH DESCRIPTION +.B xzmore +is a filter which allows examination of +.BR xz (1) +or +.BR lzma (1) +compressed text files one screenful at a time +on a soft-copy terminal. +.PP +To use a pager other than the default +.B more, +set environment variable +.B PAGER +to the name of the desired program. +The name +.B lzmore +is provided for backward compatibility with LZMA Utils. +.TP +.BR e " or " q +When the prompt \-\-More\-\-(Next file: +.IR file ) +is printed, this command causes +.B xzmore +to exit. +.TP +.B s +When the prompt \-\-More\-\-(Next file: +.IR file ) +is printed, this command causes +.B xzmore +to skip the next file and continue. +.PP +For list of keyboard commands supported while actually viewing the +content of a file, refer to manual of the pager you use, usually +.BR more (1). +.SH "SEE ALSO" +.BR more (1), +.BR xz (1), +.BR xzless (1), +.BR zmore (1) diff --git a/src/scripts/xzmore.in b/src/scripts/xzmore.in new file mode 100644 index 0000000..5188fda --- /dev/null +++ b/src/scripts/xzmore.in @@ -0,0 +1,79 @@ +#!@POSIX_SHELL@ + +# Copyright (C) 2001, 2002, 2007 Free Software Foundation +# Copyright (C) 1992, 1993 Jean-loup Gailly + +# Modified for XZ Utils by Andrew Dudman and Lasse Collin. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +@enable_path_for_scripts@ +#SET_PATH - This line is a placeholder to ease patching this script. + +# Instead of unsetting XZ_OPT, just make sure that xz will use file format +# autodetection. This way memory usage limit and thread limit can be +# specified via XZ_OPT. +xz='@xz@ --format=auto' + +version='xzmore (@PACKAGE_NAME@) @VERSION@' + +usage="Usage: ${0##*/} [OPTION]... [FILE]... +Like 'more', but operate on the uncompressed contents of xz compressed FILEs. + +Report bugs to <@PACKAGE_BUGREPORT@>." + +case $1 in + --help) printf '%s\n' "$usage" || exit 2; exit;; + --version) printf '%s\n' "$version" || exit 2; exit;; +esac + +oldtty=`stty -g 2>/dev/null` +if stty -cbreak 2>/dev/null; then + cb='cbreak'; ncb='-cbreak' +else + # 'stty min 1' resets eof to ^a on both SunOS and SysV! + cb='min 1 -icanon'; ncb='icanon eof ^d' +fi +if test $? -eq 0 && test -n "$oldtty"; then + trap 'stty $oldtty 2>/dev/null; exit' 0 2 3 5 10 13 15 +else + trap 'stty $ncb echo 2>/dev/null; exit' 0 2 3 5 10 13 15 +fi + +if test $# = 0; then + if test -t 0; then + printf '%s\n' "$usage"; exit 1 + else + $xz -cdfqQ | eval "${PAGER:-more}" + fi +else + FIRST=1 + for FILE; do + < "$FILE" || continue + if test $FIRST -eq 0; then + printf "%s--More--(Next file: %s)" "" "$FILE" + stty $cb -echo 2>/dev/null + ANS=`dd bs=1 count=1 2>/dev/null` + stty $ncb echo 2>/dev/null + echo " " + case "$ANS" in + [eq]) exit;; + esac + fi + if test "$ANS" != 's'; then + printf '%s\n' "------> $FILE <------" + $xz -cdfqQ -- "$FILE" | eval "${PAGER:-more}" + fi + if test -t 1; then + FIRST=0 + fi + done +fi diff --git a/src/xz/Makefile.am b/src/xz/Makefile.am new file mode 100644 index 0000000..4bc64f3 --- /dev/null +++ b/src/xz/Makefile.am @@ -0,0 +1,133 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +bin_PROGRAMS = xz + +xz_SOURCES = \ + args.c \ + args.h \ + coder.c \ + coder.h \ + file_io.c \ + file_io.h \ + hardware.c \ + hardware.h \ + main.c \ + main.h \ + message.c \ + message.h \ + mytime.c \ + mytime.h \ + options.c \ + options.h \ + private.h \ + signals.c \ + signals.h \ + suffix.c \ + suffix.h \ + util.c \ + util.h \ + ../common/tuklib_open_stdxxx.c \ + ../common/tuklib_progname.c \ + ../common/tuklib_exit.c \ + ../common/tuklib_mbstr_width.c \ + ../common/tuklib_mbstr_fw.c + +if COND_MAIN_DECODER +xz_SOURCES += \ + list.c \ + list.h +endif + +if COND_W32 +xz_SOURCES += xz_w32res.rc +endif + +xz_CPPFLAGS = \ + -DLOCALEDIR=\"$(localedir)\" \ + -I$(top_srcdir)/src/common \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_builddir)/lib + +xz_LDADD = $(top_builddir)/src/liblzma/liblzma.la $(CAPSICUM_LIB) + +if COND_GNULIB +xz_LDADD += $(top_builddir)/lib/libgnu.a +endif + +# libgnu.a may need these libs, so this must be after libgnu.a. +xz_LDADD += $(LTLIBINTL) + + +# Windows resource compiler support +.rc.o: + $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(xz_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@ + + +dist_man_MANS = xz.1 + + +## Create symlinks for unxz and xzcat for convenience. Create symlinks also +## for lzma, unlzma, and lzcat for compatibility with LZMA Utils 4.32.x. +xzlinks = unxz xzcat + +if COND_LZMALINKS +xzlinks += lzma unlzma lzcat +endif + +install-exec-hook: + cd "$(DESTDIR)$(bindir)" && \ + target=`echo xz | sed '$(transform)'`$(EXEEXT) && \ + for name in $(xzlinks); do \ + link=`echo $$name | sed '$(transform)'`$(LN_EXEEXT) && \ + rm -f "$$link" && \ + $(LN_S) "$$target" "$$link"; \ + done + +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. +install-data-hook: + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + target=`echo xz | sed '$(transform)'` && \ + for lang in . $$languages; do \ + man="$(top_srcdir)/po4a/man/$$lang/xz.1" ; \ + if test -f "$$man"; then \ + $(MAKE) dist_man_MANS="$$man" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + fi; \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then ( \ + cd "$$man1dir" && \ + for name in $(xzlinks); do \ + link=`echo $$name | sed '$(transform)'` && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1"; \ + done \ + ); fi; \ + done + +uninstall-hook: + cd "$(DESTDIR)$(bindir)" && \ + for name in $(xzlinks); do \ + link=`echo $$name | sed '$(transform)'`$(LN_EXEEXT) && \ + rm -f "$$link"; \ + done + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for name in xz $(xzlinks); do \ + name=`echo $$name | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$name.1"; \ + done; \ + done diff --git a/src/xz/Makefile.in b/src/xz/Makefile.in new file mode 100644 index 0000000..e6422c5 --- /dev/null +++ b/src/xz/Makefile.in @@ -0,0 +1,1162 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = xz$(EXEEXT) +@COND_MAIN_DECODER_TRUE@am__append_1 = \ +@COND_MAIN_DECODER_TRUE@ list.c \ +@COND_MAIN_DECODER_TRUE@ list.h + +@COND_W32_TRUE@am__append_2 = xz_w32res.rc +@COND_GNULIB_TRUE@am__append_3 = $(top_builddir)/lib/libgnu.a +@COND_LZMALINKS_TRUE@am__append_4 = lzma unlzma lzcat +subdir = src/xz +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_capsicum.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/getopt.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/posix-shell.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/tuklib_common.m4 \ + $(top_srcdir)/m4/tuklib_cpucores.m4 \ + $(top_srcdir)/m4/tuklib_integer.m4 \ + $(top_srcdir)/m4/tuklib_mbstr.m4 \ + $(top_srcdir)/m4/tuklib_physmem.m4 \ + $(top_srcdir)/m4/tuklib_progname.m4 \ + $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" +PROGRAMS = $(bin_PROGRAMS) +am__xz_SOURCES_DIST = args.c args.h coder.c coder.h file_io.c \ + file_io.h hardware.c hardware.h main.c main.h message.c \ + message.h mytime.c mytime.h options.c options.h private.h \ + signals.c signals.h suffix.c suffix.h util.c util.h \ + ../common/tuklib_open_stdxxx.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c ../common/tuklib_mbstr_width.c \ + ../common/tuklib_mbstr_fw.c list.c list.h xz_w32res.rc +@COND_MAIN_DECODER_TRUE@am__objects_1 = xz-list.$(OBJEXT) +@COND_W32_TRUE@am__objects_2 = xz_w32res.$(OBJEXT) +am_xz_OBJECTS = xz-args.$(OBJEXT) xz-coder.$(OBJEXT) \ + xz-file_io.$(OBJEXT) xz-hardware.$(OBJEXT) xz-main.$(OBJEXT) \ + xz-message.$(OBJEXT) xz-mytime.$(OBJEXT) xz-options.$(OBJEXT) \ + xz-signals.$(OBJEXT) xz-suffix.$(OBJEXT) xz-util.$(OBJEXT) \ + xz-tuklib_open_stdxxx.$(OBJEXT) xz-tuklib_progname.$(OBJEXT) \ + xz-tuklib_exit.$(OBJEXT) xz-tuklib_mbstr_width.$(OBJEXT) \ + xz-tuklib_mbstr_fw.$(OBJEXT) $(am__objects_1) $(am__objects_2) +xz_OBJECTS = $(am_xz_OBJECTS) +am__DEPENDENCIES_1 = +xz_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \ + $(am__DEPENDENCIES_1) $(am__append_3) $(am__DEPENDENCIES_1) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/xz-args.Po ./$(DEPDIR)/xz-coder.Po \ + ./$(DEPDIR)/xz-file_io.Po ./$(DEPDIR)/xz-hardware.Po \ + ./$(DEPDIR)/xz-list.Po ./$(DEPDIR)/xz-main.Po \ + ./$(DEPDIR)/xz-message.Po ./$(DEPDIR)/xz-mytime.Po \ + ./$(DEPDIR)/xz-options.Po ./$(DEPDIR)/xz-signals.Po \ + ./$(DEPDIR)/xz-suffix.Po ./$(DEPDIR)/xz-tuklib_exit.Po \ + ./$(DEPDIR)/xz-tuklib_mbstr_fw.Po \ + ./$(DEPDIR)/xz-tuklib_mbstr_width.Po \ + ./$(DEPDIR)/xz-tuklib_open_stdxxx.Po \ + ./$(DEPDIR)/xz-tuklib_progname.Po ./$(DEPDIR)/xz-util.Po +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(xz_SOURCES) +DIST_SOURCES = $(am__xz_SOURCES_DIST) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(dist_man_MANS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \ + $(top_srcdir)/build-aux/depcomp +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAPSICUM_LIB = @CAPSICUM_LIB@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +GETOPT_H = @GETOPT_H@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +HAVE_VISIBILITY = @HAVE_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_EXEEXT = @LN_EXEEXT@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ +POSUB = @POSUB@ +PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +enable_path_for_scripts = @enable_path_for_scripts@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xz = @xz@ +xz_SOURCES = args.c args.h coder.c coder.h file_io.c file_io.h \ + hardware.c hardware.h main.c main.h message.c message.h \ + mytime.c mytime.h options.c options.h private.h signals.c \ + signals.h suffix.c suffix.h util.c util.h \ + ../common/tuklib_open_stdxxx.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c ../common/tuklib_mbstr_width.c \ + ../common/tuklib_mbstr_fw.c $(am__append_1) $(am__append_2) +xz_CPPFLAGS = \ + -DLOCALEDIR=\"$(localedir)\" \ + -I$(top_srcdir)/src/common \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_builddir)/lib + + +# libgnu.a may need these libs, so this must be after libgnu.a. +xz_LDADD = $(top_builddir)/src/liblzma/liblzma.la $(CAPSICUM_LIB) \ + $(am__append_3) $(LTLIBINTL) +dist_man_MANS = xz.1 +xzlinks = unxz xzcat $(am__append_4) +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj .rc +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/xz/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign src/xz/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +xz$(EXEEXT): $(xz_OBJECTS) $(xz_DEPENDENCIES) $(EXTRA_xz_DEPENDENCIES) + @rm -f xz$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(xz_OBJECTS) $(xz_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-args.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-coder.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-file_io.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-hardware.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-list.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-main.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-message.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-mytime.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-options.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-signals.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-suffix.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-tuklib_exit.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-tuklib_mbstr_fw.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-tuklib_mbstr_width.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-tuklib_open_stdxxx.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-tuklib_progname.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xz-util.Po@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +xz-args.o: args.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-args.o -MD -MP -MF $(DEPDIR)/xz-args.Tpo -c -o xz-args.o `test -f 'args.c' || echo '$(srcdir)/'`args.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-args.Tpo $(DEPDIR)/xz-args.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='args.c' object='xz-args.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-args.o `test -f 'args.c' || echo '$(srcdir)/'`args.c + +xz-args.obj: args.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-args.obj -MD -MP -MF $(DEPDIR)/xz-args.Tpo -c -o xz-args.obj `if test -f 'args.c'; then $(CYGPATH_W) 'args.c'; else $(CYGPATH_W) '$(srcdir)/args.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-args.Tpo $(DEPDIR)/xz-args.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='args.c' object='xz-args.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-args.obj `if test -f 'args.c'; then $(CYGPATH_W) 'args.c'; else $(CYGPATH_W) '$(srcdir)/args.c'; fi` + +xz-coder.o: coder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-coder.o -MD -MP -MF $(DEPDIR)/xz-coder.Tpo -c -o xz-coder.o `test -f 'coder.c' || echo '$(srcdir)/'`coder.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-coder.Tpo $(DEPDIR)/xz-coder.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='coder.c' object='xz-coder.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-coder.o `test -f 'coder.c' || echo '$(srcdir)/'`coder.c + +xz-coder.obj: coder.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-coder.obj -MD -MP -MF $(DEPDIR)/xz-coder.Tpo -c -o xz-coder.obj `if test -f 'coder.c'; then $(CYGPATH_W) 'coder.c'; else $(CYGPATH_W) '$(srcdir)/coder.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-coder.Tpo $(DEPDIR)/xz-coder.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='coder.c' object='xz-coder.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-coder.obj `if test -f 'coder.c'; then $(CYGPATH_W) 'coder.c'; else $(CYGPATH_W) '$(srcdir)/coder.c'; fi` + +xz-file_io.o: file_io.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-file_io.o -MD -MP -MF $(DEPDIR)/xz-file_io.Tpo -c -o xz-file_io.o `test -f 'file_io.c' || echo '$(srcdir)/'`file_io.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-file_io.Tpo $(DEPDIR)/xz-file_io.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='file_io.c' object='xz-file_io.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-file_io.o `test -f 'file_io.c' || echo '$(srcdir)/'`file_io.c + +xz-file_io.obj: file_io.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-file_io.obj -MD -MP -MF $(DEPDIR)/xz-file_io.Tpo -c -o xz-file_io.obj `if test -f 'file_io.c'; then $(CYGPATH_W) 'file_io.c'; else $(CYGPATH_W) '$(srcdir)/file_io.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-file_io.Tpo $(DEPDIR)/xz-file_io.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='file_io.c' object='xz-file_io.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-file_io.obj `if test -f 'file_io.c'; then $(CYGPATH_W) 'file_io.c'; else $(CYGPATH_W) '$(srcdir)/file_io.c'; fi` + +xz-hardware.o: hardware.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-hardware.o -MD -MP -MF $(DEPDIR)/xz-hardware.Tpo -c -o xz-hardware.o `test -f 'hardware.c' || echo '$(srcdir)/'`hardware.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-hardware.Tpo $(DEPDIR)/xz-hardware.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='hardware.c' object='xz-hardware.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-hardware.o `test -f 'hardware.c' || echo '$(srcdir)/'`hardware.c + +xz-hardware.obj: hardware.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-hardware.obj -MD -MP -MF $(DEPDIR)/xz-hardware.Tpo -c -o xz-hardware.obj `if test -f 'hardware.c'; then $(CYGPATH_W) 'hardware.c'; else $(CYGPATH_W) '$(srcdir)/hardware.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-hardware.Tpo $(DEPDIR)/xz-hardware.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='hardware.c' object='xz-hardware.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-hardware.obj `if test -f 'hardware.c'; then $(CYGPATH_W) 'hardware.c'; else $(CYGPATH_W) '$(srcdir)/hardware.c'; fi` + +xz-main.o: main.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-main.o -MD -MP -MF $(DEPDIR)/xz-main.Tpo -c -o xz-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-main.Tpo $(DEPDIR)/xz-main.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main.c' object='xz-main.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c + +xz-main.obj: main.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-main.obj -MD -MP -MF $(DEPDIR)/xz-main.Tpo -c -o xz-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-main.Tpo $(DEPDIR)/xz-main.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main.c' object='xz-main.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` + +xz-message.o: message.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-message.o -MD -MP -MF $(DEPDIR)/xz-message.Tpo -c -o xz-message.o `test -f 'message.c' || echo '$(srcdir)/'`message.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-message.Tpo $(DEPDIR)/xz-message.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='message.c' object='xz-message.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-message.o `test -f 'message.c' || echo '$(srcdir)/'`message.c + +xz-message.obj: message.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-message.obj -MD -MP -MF $(DEPDIR)/xz-message.Tpo -c -o xz-message.obj `if test -f 'message.c'; then $(CYGPATH_W) 'message.c'; else $(CYGPATH_W) '$(srcdir)/message.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-message.Tpo $(DEPDIR)/xz-message.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='message.c' object='xz-message.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-message.obj `if test -f 'message.c'; then $(CYGPATH_W) 'message.c'; else $(CYGPATH_W) '$(srcdir)/message.c'; fi` + +xz-mytime.o: mytime.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-mytime.o -MD -MP -MF $(DEPDIR)/xz-mytime.Tpo -c -o xz-mytime.o `test -f 'mytime.c' || echo '$(srcdir)/'`mytime.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-mytime.Tpo $(DEPDIR)/xz-mytime.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mytime.c' object='xz-mytime.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-mytime.o `test -f 'mytime.c' || echo '$(srcdir)/'`mytime.c + +xz-mytime.obj: mytime.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-mytime.obj -MD -MP -MF $(DEPDIR)/xz-mytime.Tpo -c -o xz-mytime.obj `if test -f 'mytime.c'; then $(CYGPATH_W) 'mytime.c'; else $(CYGPATH_W) '$(srcdir)/mytime.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-mytime.Tpo $(DEPDIR)/xz-mytime.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mytime.c' object='xz-mytime.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-mytime.obj `if test -f 'mytime.c'; then $(CYGPATH_W) 'mytime.c'; else $(CYGPATH_W) '$(srcdir)/mytime.c'; fi` + +xz-options.o: options.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-options.o -MD -MP -MF $(DEPDIR)/xz-options.Tpo -c -o xz-options.o `test -f 'options.c' || echo '$(srcdir)/'`options.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-options.Tpo $(DEPDIR)/xz-options.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='options.c' object='xz-options.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-options.o `test -f 'options.c' || echo '$(srcdir)/'`options.c + +xz-options.obj: options.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-options.obj -MD -MP -MF $(DEPDIR)/xz-options.Tpo -c -o xz-options.obj `if test -f 'options.c'; then $(CYGPATH_W) 'options.c'; else $(CYGPATH_W) '$(srcdir)/options.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-options.Tpo $(DEPDIR)/xz-options.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='options.c' object='xz-options.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-options.obj `if test -f 'options.c'; then $(CYGPATH_W) 'options.c'; else $(CYGPATH_W) '$(srcdir)/options.c'; fi` + +xz-signals.o: signals.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-signals.o -MD -MP -MF $(DEPDIR)/xz-signals.Tpo -c -o xz-signals.o `test -f 'signals.c' || echo '$(srcdir)/'`signals.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-signals.Tpo $(DEPDIR)/xz-signals.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='signals.c' object='xz-signals.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-signals.o `test -f 'signals.c' || echo '$(srcdir)/'`signals.c + +xz-signals.obj: signals.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-signals.obj -MD -MP -MF $(DEPDIR)/xz-signals.Tpo -c -o xz-signals.obj `if test -f 'signals.c'; then $(CYGPATH_W) 'signals.c'; else $(CYGPATH_W) '$(srcdir)/signals.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-signals.Tpo $(DEPDIR)/xz-signals.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='signals.c' object='xz-signals.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-signals.obj `if test -f 'signals.c'; then $(CYGPATH_W) 'signals.c'; else $(CYGPATH_W) '$(srcdir)/signals.c'; fi` + +xz-suffix.o: suffix.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-suffix.o -MD -MP -MF $(DEPDIR)/xz-suffix.Tpo -c -o xz-suffix.o `test -f 'suffix.c' || echo '$(srcdir)/'`suffix.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-suffix.Tpo $(DEPDIR)/xz-suffix.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='suffix.c' object='xz-suffix.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-suffix.o `test -f 'suffix.c' || echo '$(srcdir)/'`suffix.c + +xz-suffix.obj: suffix.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-suffix.obj -MD -MP -MF $(DEPDIR)/xz-suffix.Tpo -c -o xz-suffix.obj `if test -f 'suffix.c'; then $(CYGPATH_W) 'suffix.c'; else $(CYGPATH_W) '$(srcdir)/suffix.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-suffix.Tpo $(DEPDIR)/xz-suffix.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='suffix.c' object='xz-suffix.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-suffix.obj `if test -f 'suffix.c'; then $(CYGPATH_W) 'suffix.c'; else $(CYGPATH_W) '$(srcdir)/suffix.c'; fi` + +xz-util.o: util.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-util.o -MD -MP -MF $(DEPDIR)/xz-util.Tpo -c -o xz-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-util.Tpo $(DEPDIR)/xz-util.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='util.c' object='xz-util.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c + +xz-util.obj: util.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-util.obj -MD -MP -MF $(DEPDIR)/xz-util.Tpo -c -o xz-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-util.Tpo $(DEPDIR)/xz-util.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='util.c' object='xz-util.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi` + +xz-tuklib_open_stdxxx.o: ../common/tuklib_open_stdxxx.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_open_stdxxx.o -MD -MP -MF $(DEPDIR)/xz-tuklib_open_stdxxx.Tpo -c -o xz-tuklib_open_stdxxx.o `test -f '../common/tuklib_open_stdxxx.c' || echo '$(srcdir)/'`../common/tuklib_open_stdxxx.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_open_stdxxx.Tpo $(DEPDIR)/xz-tuklib_open_stdxxx.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_open_stdxxx.c' object='xz-tuklib_open_stdxxx.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_open_stdxxx.o `test -f '../common/tuklib_open_stdxxx.c' || echo '$(srcdir)/'`../common/tuklib_open_stdxxx.c + +xz-tuklib_open_stdxxx.obj: ../common/tuklib_open_stdxxx.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_open_stdxxx.obj -MD -MP -MF $(DEPDIR)/xz-tuklib_open_stdxxx.Tpo -c -o xz-tuklib_open_stdxxx.obj `if test -f '../common/tuklib_open_stdxxx.c'; then $(CYGPATH_W) '../common/tuklib_open_stdxxx.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_open_stdxxx.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_open_stdxxx.Tpo $(DEPDIR)/xz-tuklib_open_stdxxx.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_open_stdxxx.c' object='xz-tuklib_open_stdxxx.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_open_stdxxx.obj `if test -f '../common/tuklib_open_stdxxx.c'; then $(CYGPATH_W) '../common/tuklib_open_stdxxx.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_open_stdxxx.c'; fi` + +xz-tuklib_progname.o: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_progname.o -MD -MP -MF $(DEPDIR)/xz-tuklib_progname.Tpo -c -o xz-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_progname.Tpo $(DEPDIR)/xz-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='xz-tuklib_progname.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c + +xz-tuklib_progname.obj: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_progname.obj -MD -MP -MF $(DEPDIR)/xz-tuklib_progname.Tpo -c -o xz-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_progname.Tpo $(DEPDIR)/xz-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='xz-tuklib_progname.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` + +xz-tuklib_exit.o: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_exit.o -MD -MP -MF $(DEPDIR)/xz-tuklib_exit.Tpo -c -o xz-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_exit.Tpo $(DEPDIR)/xz-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='xz-tuklib_exit.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c + +xz-tuklib_exit.obj: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_exit.obj -MD -MP -MF $(DEPDIR)/xz-tuklib_exit.Tpo -c -o xz-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_exit.Tpo $(DEPDIR)/xz-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='xz-tuklib_exit.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` + +xz-tuklib_mbstr_width.o: ../common/tuklib_mbstr_width.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_mbstr_width.o -MD -MP -MF $(DEPDIR)/xz-tuklib_mbstr_width.Tpo -c -o xz-tuklib_mbstr_width.o `test -f '../common/tuklib_mbstr_width.c' || echo '$(srcdir)/'`../common/tuklib_mbstr_width.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_mbstr_width.Tpo $(DEPDIR)/xz-tuklib_mbstr_width.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_mbstr_width.c' object='xz-tuklib_mbstr_width.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_mbstr_width.o `test -f '../common/tuklib_mbstr_width.c' || echo '$(srcdir)/'`../common/tuklib_mbstr_width.c + +xz-tuklib_mbstr_width.obj: ../common/tuklib_mbstr_width.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_mbstr_width.obj -MD -MP -MF $(DEPDIR)/xz-tuklib_mbstr_width.Tpo -c -o xz-tuklib_mbstr_width.obj `if test -f '../common/tuklib_mbstr_width.c'; then $(CYGPATH_W) '../common/tuklib_mbstr_width.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_mbstr_width.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_mbstr_width.Tpo $(DEPDIR)/xz-tuklib_mbstr_width.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_mbstr_width.c' object='xz-tuklib_mbstr_width.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_mbstr_width.obj `if test -f '../common/tuklib_mbstr_width.c'; then $(CYGPATH_W) '../common/tuklib_mbstr_width.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_mbstr_width.c'; fi` + +xz-tuklib_mbstr_fw.o: ../common/tuklib_mbstr_fw.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_mbstr_fw.o -MD -MP -MF $(DEPDIR)/xz-tuklib_mbstr_fw.Tpo -c -o xz-tuklib_mbstr_fw.o `test -f '../common/tuklib_mbstr_fw.c' || echo '$(srcdir)/'`../common/tuklib_mbstr_fw.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_mbstr_fw.Tpo $(DEPDIR)/xz-tuklib_mbstr_fw.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_mbstr_fw.c' object='xz-tuklib_mbstr_fw.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_mbstr_fw.o `test -f '../common/tuklib_mbstr_fw.c' || echo '$(srcdir)/'`../common/tuklib_mbstr_fw.c + +xz-tuklib_mbstr_fw.obj: ../common/tuklib_mbstr_fw.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-tuklib_mbstr_fw.obj -MD -MP -MF $(DEPDIR)/xz-tuklib_mbstr_fw.Tpo -c -o xz-tuklib_mbstr_fw.obj `if test -f '../common/tuklib_mbstr_fw.c'; then $(CYGPATH_W) '../common/tuklib_mbstr_fw.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_mbstr_fw.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-tuklib_mbstr_fw.Tpo $(DEPDIR)/xz-tuklib_mbstr_fw.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_mbstr_fw.c' object='xz-tuklib_mbstr_fw.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-tuklib_mbstr_fw.obj `if test -f '../common/tuklib_mbstr_fw.c'; then $(CYGPATH_W) '../common/tuklib_mbstr_fw.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_mbstr_fw.c'; fi` + +xz-list.o: list.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-list.o -MD -MP -MF $(DEPDIR)/xz-list.Tpo -c -o xz-list.o `test -f 'list.c' || echo '$(srcdir)/'`list.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-list.Tpo $(DEPDIR)/xz-list.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='list.c' object='xz-list.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-list.o `test -f 'list.c' || echo '$(srcdir)/'`list.c + +xz-list.obj: list.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xz-list.obj -MD -MP -MF $(DEPDIR)/xz-list.Tpo -c -o xz-list.obj `if test -f 'list.c'; then $(CYGPATH_W) 'list.c'; else $(CYGPATH_W) '$(srcdir)/list.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xz-list.Tpo $(DEPDIR)/xz-list.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='list.c' object='xz-list.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xz_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xz-list.obj `if test -f 'list.c'; then $(CYGPATH_W) 'list.c'; else $(CYGPATH_W) '$(srcdir)/list.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-man1: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(MANS) +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f ./$(DEPDIR)/xz-args.Po + -rm -f ./$(DEPDIR)/xz-coder.Po + -rm -f ./$(DEPDIR)/xz-file_io.Po + -rm -f ./$(DEPDIR)/xz-hardware.Po + -rm -f ./$(DEPDIR)/xz-list.Po + -rm -f ./$(DEPDIR)/xz-main.Po + -rm -f ./$(DEPDIR)/xz-message.Po + -rm -f ./$(DEPDIR)/xz-mytime.Po + -rm -f ./$(DEPDIR)/xz-options.Po + -rm -f ./$(DEPDIR)/xz-signals.Po + -rm -f ./$(DEPDIR)/xz-suffix.Po + -rm -f ./$(DEPDIR)/xz-tuklib_exit.Po + -rm -f ./$(DEPDIR)/xz-tuklib_mbstr_fw.Po + -rm -f ./$(DEPDIR)/xz-tuklib_mbstr_width.Po + -rm -f ./$(DEPDIR)/xz-tuklib_open_stdxxx.Po + -rm -f ./$(DEPDIR)/xz-tuklib_progname.Po + -rm -f ./$(DEPDIR)/xz-util.Po + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-exec-hook +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f ./$(DEPDIR)/xz-args.Po + -rm -f ./$(DEPDIR)/xz-coder.Po + -rm -f ./$(DEPDIR)/xz-file_io.Po + -rm -f ./$(DEPDIR)/xz-hardware.Po + -rm -f ./$(DEPDIR)/xz-list.Po + -rm -f ./$(DEPDIR)/xz-main.Po + -rm -f ./$(DEPDIR)/xz-message.Po + -rm -f ./$(DEPDIR)/xz-mytime.Po + -rm -f ./$(DEPDIR)/xz-options.Po + -rm -f ./$(DEPDIR)/xz-signals.Po + -rm -f ./$(DEPDIR)/xz-suffix.Po + -rm -f ./$(DEPDIR)/xz-tuklib_exit.Po + -rm -f ./$(DEPDIR)/xz-tuklib_mbstr_fw.Po + -rm -f ./$(DEPDIR)/xz-tuklib_mbstr_width.Po + -rm -f ./$(DEPDIR)/xz-tuklib_open_stdxxx.Po + -rm -f ./$(DEPDIR)/xz-tuklib_progname.Po + -rm -f ./$(DEPDIR)/xz-util.Po + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-man + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook +uninstall-man: uninstall-man1 + +.MAKE: install-am install-data-am install-exec-am install-strip \ + uninstall-am + +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ + clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \ + ctags ctags-am distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-data-hook install-dvi \ + install-dvi-am install-exec install-exec-am install-exec-hook \ + install-html install-html-am install-info install-info-am \ + install-man install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-hook \ + uninstall-man uninstall-man1 + +.PRECIOUS: Makefile + + +# Windows resource compiler support +.rc.o: + $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(xz_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@ + +install-exec-hook: + cd "$(DESTDIR)$(bindir)" && \ + target=`echo xz | sed '$(transform)'`$(EXEEXT) && \ + for name in $(xzlinks); do \ + link=`echo $$name | sed '$(transform)'`$(LN_EXEEXT) && \ + rm -f "$$link" && \ + $(LN_S) "$$target" "$$link"; \ + done + +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. +install-data-hook: + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + target=`echo xz | sed '$(transform)'` && \ + for lang in . $$languages; do \ + man="$(top_srcdir)/po4a/man/$$lang/xz.1" ; \ + if test -f "$$man"; then \ + $(MAKE) dist_man_MANS="$$man" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + fi; \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then ( \ + cd "$$man1dir" && \ + for name in $(xzlinks); do \ + link=`echo $$name | sed '$(transform)'` && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1"; \ + done \ + ); fi; \ + done + +uninstall-hook: + cd "$(DESTDIR)$(bindir)" && \ + for name in $(xzlinks); do \ + link=`echo $$name | sed '$(transform)'`$(LN_EXEEXT) && \ + rm -f "$$link"; \ + done + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for name in xz $(xzlinks); do \ + name=`echo $$name | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$name.1"; \ + done; \ + done + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/xz/args.c b/src/xz/args.c new file mode 100644 index 0000000..b0a1174 --- /dev/null +++ b/src/xz/args.c @@ -0,0 +1,751 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file args.c +/// \brief Argument parsing +/// +/// \note Filter-specific options parsing is in options.c. +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + +#include "getopt.h" +#include + + +bool opt_stdout = false; +bool opt_force = false; +bool opt_keep_original = false; +bool opt_robot = false; +bool opt_ignore_check = false; + +// We don't modify or free() this, but we need to assign it in some +// non-const pointers. +const char stdin_filename[] = "(stdin)"; + + +/// Parse and set the memory usage limit for compression, decompression, +/// and/or multithreaded decompression. +static void +parse_memlimit(const char *name, const char *name_percentage, const char *str, + bool set_compress, bool set_decompress, bool set_mtdec) +{ + bool is_percentage = false; + uint64_t value; + + const size_t len = strlen(str); + if (len > 0 && str[len - 1] == '%') { + // Make a copy so that we can get rid of %. + // + // In the past str wasn't const and we modified it directly + // but that modified argv[] and thus affected what was visible + // in "ps auxf" or similar tools which was confusing. For + // example, --memlimit=50% would show up as --memlimit=50 + // since the percent sign was overwritten here. + char *s = xstrdup(str); + s[len - 1] = '\0'; + is_percentage = true; + value = str_to_uint64(name_percentage, s, 1, 100); + free(s); + } else { + // On 32-bit systems, SIZE_MAX would make more sense than + // UINT64_MAX. But use UINT64_MAX still so that scripts + // that assume > 4 GiB values don't break. + value = str_to_uint64(name, str, 0, UINT64_MAX); + } + + hardware_memlimit_set(value, set_compress, set_decompress, set_mtdec, + is_percentage); + return; +} + + +static void +parse_block_list(const char *str_const) +{ + // We need a modifiable string in the for-loop. + char *str_start = xstrdup(str_const); + char *str = str_start; + + // It must be non-empty and not begin with a comma. + if (str[0] == '\0' || str[0] == ',') + message_fatal(_("%s: Invalid argument to --block-list"), str); + + // Count the number of comma-separated strings. + size_t count = 1; + for (size_t i = 0; str[i] != '\0'; ++i) + if (str[i] == ',') + ++count; + + // Prevent an unlikely integer overflow. + if (count > SIZE_MAX / sizeof(uint64_t) - 1) + message_fatal(_("%s: Too many arguments to --block-list"), + str); + + // Allocate memory to hold all the sizes specified. + // If --block-list was specified already, its value is forgotten. + free(opt_block_list); + opt_block_list = xmalloc((count + 1) * sizeof(uint64_t)); + + for (size_t i = 0; i < count; ++i) { + // Locate the next comma and replace it with \0. + char *p = strchr(str, ','); + if (p != NULL) + *p = '\0'; + + if (str[0] == '\0') { + // There is no string, that is, a comma follows + // another comma. Use the previous value. + // + // NOTE: We checked earlier that the first char + // of the whole list cannot be a comma. + assert(i > 0); + opt_block_list[i] = opt_block_list[i - 1]; + } else { + opt_block_list[i] = str_to_uint64("block-list", str, + 0, UINT64_MAX); + + // Zero indicates no more new Blocks. + if (opt_block_list[i] == 0) { + if (i + 1 != count) + message_fatal(_("0 can only be used " + "as the last element " + "in --block-list")); + + opt_block_list[i] = UINT64_MAX; + } + } + + str = p + 1; + } + + // Terminate the array. + opt_block_list[count] = 0; + + free(str_start); + return; +} + + +static void +parse_real(args_info *args, int argc, char **argv) +{ + enum { + OPT_X86 = INT_MIN, + OPT_POWERPC, + OPT_IA64, + OPT_ARM, + OPT_ARMTHUMB, + OPT_ARM64, + OPT_SPARC, + OPT_DELTA, + OPT_LZMA1, + OPT_LZMA2, + + OPT_SINGLE_STREAM, + OPT_NO_SPARSE, + OPT_FILES, + OPT_FILES0, + OPT_BLOCK_SIZE, + OPT_BLOCK_LIST, + OPT_MEM_COMPRESS, + OPT_MEM_DECOMPRESS, + OPT_MEM_MT_DECOMPRESS, + OPT_NO_ADJUST, + OPT_INFO_MEMORY, + OPT_ROBOT, + OPT_FLUSH_TIMEOUT, + OPT_IGNORE_CHECK, + }; + + static const char short_opts[] + = "cC:defF:hHlkM:qQrS:tT:vVz0123456789"; + + static const struct option long_opts[] = { + // Operation mode + { "compress", no_argument, NULL, 'z' }, + { "decompress", no_argument, NULL, 'd' }, + { "uncompress", no_argument, NULL, 'd' }, + { "test", no_argument, NULL, 't' }, + { "list", no_argument, NULL, 'l' }, + + // Operation modifiers + { "keep", no_argument, NULL, 'k' }, + { "force", no_argument, NULL, 'f' }, + { "stdout", no_argument, NULL, 'c' }, + { "to-stdout", no_argument, NULL, 'c' }, + { "single-stream", no_argument, NULL, OPT_SINGLE_STREAM }, + { "no-sparse", no_argument, NULL, OPT_NO_SPARSE }, + { "suffix", required_argument, NULL, 'S' }, + // { "recursive", no_argument, NULL, 'r' }, // TODO + { "files", optional_argument, NULL, OPT_FILES }, + { "files0", optional_argument, NULL, OPT_FILES0 }, + + // Basic compression settings + { "format", required_argument, NULL, 'F' }, + { "check", required_argument, NULL, 'C' }, + { "ignore-check", no_argument, NULL, OPT_IGNORE_CHECK }, + { "block-size", required_argument, NULL, OPT_BLOCK_SIZE }, + { "block-list", required_argument, NULL, OPT_BLOCK_LIST }, + { "memlimit-compress", required_argument, NULL, OPT_MEM_COMPRESS }, + { "memlimit-decompress", required_argument, NULL, OPT_MEM_DECOMPRESS }, + { "memlimit-mt-decompress", required_argument, NULL, OPT_MEM_MT_DECOMPRESS }, + { "memlimit", required_argument, NULL, 'M' }, + { "memory", required_argument, NULL, 'M' }, // Old alias + { "no-adjust", no_argument, NULL, OPT_NO_ADJUST }, + { "threads", required_argument, NULL, 'T' }, + { "flush-timeout", required_argument, NULL, OPT_FLUSH_TIMEOUT }, + + { "extreme", no_argument, NULL, 'e' }, + { "fast", no_argument, NULL, '0' }, + { "best", no_argument, NULL, '9' }, + + // Filters + { "lzma1", optional_argument, NULL, OPT_LZMA1 }, + { "lzma2", optional_argument, NULL, OPT_LZMA2 }, + { "x86", optional_argument, NULL, OPT_X86 }, + { "powerpc", optional_argument, NULL, OPT_POWERPC }, + { "ia64", optional_argument, NULL, OPT_IA64 }, + { "arm", optional_argument, NULL, OPT_ARM }, + { "armthumb", optional_argument, NULL, OPT_ARMTHUMB }, + { "arm64", optional_argument, NULL, OPT_ARM64 }, + { "sparc", optional_argument, NULL, OPT_SPARC }, + { "delta", optional_argument, NULL, OPT_DELTA }, + + // Other options + { "quiet", no_argument, NULL, 'q' }, + { "verbose", no_argument, NULL, 'v' }, + { "no-warn", no_argument, NULL, 'Q' }, + { "robot", no_argument, NULL, OPT_ROBOT }, + { "info-memory", no_argument, NULL, OPT_INFO_MEMORY }, + { "help", no_argument, NULL, 'h' }, + { "long-help", no_argument, NULL, 'H' }, + { "version", no_argument, NULL, 'V' }, + + { NULL, 0, NULL, 0 } + }; + + int c; + + while ((c = getopt_long(argc, argv, short_opts, long_opts, NULL)) + != -1) { + switch (c) { + // Compression preset (also for decompression if --format=raw) + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + coder_set_preset((uint32_t)(c - '0')); + break; + + // --memlimit-compress + case OPT_MEM_COMPRESS: + parse_memlimit("memlimit-compress", + "memlimit-compress%", optarg, + true, false, false); + break; + + // --memlimit-decompress + case OPT_MEM_DECOMPRESS: + parse_memlimit("memlimit-decompress", + "memlimit-decompress%", optarg, + false, true, false); + break; + + // --memlimit-mt-decompress + case OPT_MEM_MT_DECOMPRESS: + parse_memlimit("memlimit-mt-decompress", + "memlimit-mt-decompress%", optarg, + false, false, true); + break; + + // --memlimit + case 'M': + parse_memlimit("memlimit", "memlimit%", optarg, + true, true, true); + break; + + // --suffix + case 'S': + suffix_set(optarg); + break; + + case 'T': { + // Since xz 5.4.0: Ignore leading '+' first. + const char *s = optarg; + if (optarg[0] == '+') + ++s; + + // The max is from src/liblzma/common/common.h. + uint32_t t = str_to_uint64("threads", s, 0, 16384); + + // If leading '+' was used then use multi-threaded + // mode even if exactly one thread was specified. + if (t == 1 && optarg[0] == '+') + t = UINT32_MAX; + + hardware_threads_set(t); + break; + } + + // --version + case 'V': + // This doesn't return. + message_version(); + + // --stdout + case 'c': + opt_stdout = true; + break; + + // --decompress + case 'd': + opt_mode = MODE_DECOMPRESS; + break; + + // --extreme + case 'e': + coder_set_extreme(); + break; + + // --force + case 'f': + opt_force = true; + break; + + // --info-memory + case OPT_INFO_MEMORY: + // This doesn't return. + hardware_memlimit_show(); + + // --help + case 'h': + // This doesn't return. + message_help(false); + + // --long-help + case 'H': + // This doesn't return. + message_help(true); + + // --list + case 'l': + opt_mode = MODE_LIST; + break; + + // --keep + case 'k': + opt_keep_original = true; + break; + + // --quiet + case 'q': + message_verbosity_decrease(); + break; + + case 'Q': + set_exit_no_warn(); + break; + + case 't': + opt_mode = MODE_TEST; + break; + + // --verbose + case 'v': + message_verbosity_increase(); + break; + + // --robot + case OPT_ROBOT: + opt_robot = true; + + // This is to make sure that floating point numbers + // always have a dot as decimal separator. + setlocale(LC_NUMERIC, "C"); + break; + + case 'z': + opt_mode = MODE_COMPRESS; + break; + + // Filter setup + + case OPT_X86: + coder_add_filter(LZMA_FILTER_X86, + options_bcj(optarg)); + break; + + case OPT_POWERPC: + coder_add_filter(LZMA_FILTER_POWERPC, + options_bcj(optarg)); + break; + + case OPT_IA64: + coder_add_filter(LZMA_FILTER_IA64, + options_bcj(optarg)); + break; + + case OPT_ARM: + coder_add_filter(LZMA_FILTER_ARM, + options_bcj(optarg)); + break; + + case OPT_ARMTHUMB: + coder_add_filter(LZMA_FILTER_ARMTHUMB, + options_bcj(optarg)); + break; + + case OPT_ARM64: + coder_add_filter(LZMA_FILTER_ARM64, + options_bcj(optarg)); + break; + + case OPT_SPARC: + coder_add_filter(LZMA_FILTER_SPARC, + options_bcj(optarg)); + break; + + case OPT_DELTA: + coder_add_filter(LZMA_FILTER_DELTA, + options_delta(optarg)); + break; + + case OPT_LZMA1: + coder_add_filter(LZMA_FILTER_LZMA1, + options_lzma(optarg)); + break; + + case OPT_LZMA2: + coder_add_filter(LZMA_FILTER_LZMA2, + options_lzma(optarg)); + break; + + // Other + + // --format + case 'F': { + // Just in case, support both "lzma" and "alone" since + // the latter was used for forward compatibility in + // LZMA Utils 4.32.x. + static const struct { + char str[8]; + enum format_type format; + } types[] = { + { "auto", FORMAT_AUTO }, + { "xz", FORMAT_XZ }, + { "lzma", FORMAT_LZMA }, + { "alone", FORMAT_LZMA }, +#ifdef HAVE_LZIP_DECODER + { "lzip", FORMAT_LZIP }, +#endif + { "raw", FORMAT_RAW }, + }; + + size_t i = 0; + while (strcmp(types[i].str, optarg) != 0) + if (++i == ARRAY_SIZE(types)) + message_fatal(_("%s: Unknown file " + "format type"), + optarg); + + opt_format = types[i].format; + break; + } + + // --check + case 'C': { + static const struct { + char str[8]; + lzma_check check; + } types[] = { + { "none", LZMA_CHECK_NONE }, + { "crc32", LZMA_CHECK_CRC32 }, + { "crc64", LZMA_CHECK_CRC64 }, + { "sha256", LZMA_CHECK_SHA256 }, + }; + + size_t i = 0; + while (strcmp(types[i].str, optarg) != 0) { + if (++i == ARRAY_SIZE(types)) + message_fatal(_("%s: Unsupported " + "integrity " + "check type"), optarg); + } + + // Use a separate check in case we are using different + // liblzma than what was used to compile us. + if (!lzma_check_is_supported(types[i].check)) + message_fatal(_("%s: Unsupported integrity " + "check type"), optarg); + + coder_set_check(types[i].check); + break; + } + + case OPT_IGNORE_CHECK: + opt_ignore_check = true; + break; + + case OPT_BLOCK_SIZE: + opt_block_size = str_to_uint64("block-size", optarg, + 0, LZMA_VLI_MAX); + break; + + case OPT_BLOCK_LIST: { + parse_block_list(optarg); + break; + } + + case OPT_SINGLE_STREAM: + opt_single_stream = true; + break; + + case OPT_NO_SPARSE: + io_no_sparse(); + break; + + case OPT_FILES: + args->files_delim = '\n'; + + // Fall through + + case OPT_FILES0: + if (args->files_name != NULL) + message_fatal(_("Only one file can be " + "specified with `--files' " + "or `--files0'.")); + + if (optarg == NULL) { + args->files_name = stdin_filename; + args->files_file = stdin; + } else { + args->files_name = optarg; + args->files_file = fopen(optarg, + c == OPT_FILES ? "r" : "rb"); + if (args->files_file == NULL) + message_fatal("%s: %s", optarg, + strerror(errno)); + } + + break; + + case OPT_NO_ADJUST: + opt_auto_adjust = false; + break; + + case OPT_FLUSH_TIMEOUT: + opt_flush_timeout = str_to_uint64("flush-timeout", + optarg, 0, UINT64_MAX); + break; + + default: + message_try_help(); + tuklib_exit(E_ERROR, E_ERROR, false); + } + } + + return; +} + + +static void +parse_environment(args_info *args, char *argv0, const char *varname) +{ + char *env = getenv(varname); + if (env == NULL) + return; + + // We modify the string, so make a copy of it. + env = xstrdup(env); + + // Calculate the number of arguments in env. argc stats at one + // to include space for the program name. + int argc = 1; + bool prev_was_space = true; + for (size_t i = 0; env[i] != '\0'; ++i) { + // NOTE: Cast to unsigned char is needed so that correct + // value gets passed to isspace(), which expects + // unsigned char cast to int. Casting to int is done + // automatically due to integer promotion, but we need to + // force char to unsigned char manually. Otherwise 8-bit + // characters would get promoted to wrong value if + // char is signed. + if (isspace((unsigned char)env[i])) { + prev_was_space = true; + } else if (prev_was_space) { + prev_was_space = false; + + // Keep argc small enough to fit into a signed int + // and to keep it usable for memory allocation. + if (++argc == my_min( + INT_MAX, SIZE_MAX / sizeof(char *))) + message_fatal(_("The environment variable " + "%s contains too many " + "arguments"), varname); + } + } + + // Allocate memory to hold pointers to the arguments. Add one to get + // space for the terminating NULL (if some systems happen to need it). + char **argv = xmalloc(((size_t)(argc) + 1) * sizeof(char *)); + argv[0] = argv0; + argv[argc] = NULL; + + // Go through the string again. Split the arguments using '\0' + // characters and add pointers to the resulting strings to argv. + argc = 1; + prev_was_space = true; + for (size_t i = 0; env[i] != '\0'; ++i) { + if (isspace((unsigned char)env[i])) { + prev_was_space = true; + env[i] = '\0'; + } else if (prev_was_space) { + prev_was_space = false; + argv[argc++] = env + i; + } + } + + // Parse the argument list we got from the environment. All non-option + // arguments i.e. filenames are ignored. + parse_real(args, argc, argv); + + // Reset the state of the getopt_long() so that we can parse the + // command line options too. There are two incompatible ways to + // do it. +#ifdef HAVE_OPTRESET + // BSD + optind = 1; + optreset = 1; +#else + // GNU, Solaris + optind = 0; +#endif + + // We don't need the argument list from environment anymore. + free(argv); + free(env); + + return; +} + + +extern void +args_parse(args_info *args, int argc, char **argv) +{ + // Initialize those parts of *args that we need later. + args->files_name = NULL; + args->files_file = NULL; + args->files_delim = '\0'; + + // Check how we were called. + { + // Remove the leading path name, if any. + const char *name = strrchr(argv[0], '/'); + if (name == NULL) + name = argv[0]; + else + ++name; + + // NOTE: It's possible that name[0] is now '\0' if argv[0] + // is weird, but it doesn't matter here. + + // Look for full command names instead of substrings like + // "un", "cat", and "lz" to reduce possibility of false + // positives when the programs have been renamed. + if (strstr(name, "xzcat") != NULL) { + opt_mode = MODE_DECOMPRESS; + opt_stdout = true; + } else if (strstr(name, "unxz") != NULL) { + opt_mode = MODE_DECOMPRESS; + } else if (strstr(name, "lzcat") != NULL) { + opt_format = FORMAT_LZMA; + opt_mode = MODE_DECOMPRESS; + opt_stdout = true; + } else if (strstr(name, "unlzma") != NULL) { + opt_format = FORMAT_LZMA; + opt_mode = MODE_DECOMPRESS; + } else if (strstr(name, "lzma") != NULL) { + opt_format = FORMAT_LZMA; + } + } + + // First the flags from the environment + parse_environment(args, argv[0], "XZ_DEFAULTS"); + parse_environment(args, argv[0], "XZ_OPT"); + + // Then from the command line + parse_real(args, argc, argv); + + // If encoder or decoder support was omitted at build time, + // show an error now so that the rest of the code can rely on + // that whatever is in opt_mode is also supported. +#ifndef HAVE_ENCODERS + if (opt_mode == MODE_COMPRESS) + message_fatal(_("Compression support was disabled " + "at build time")); +#endif +#ifndef HAVE_DECODERS + // Even MODE_LIST cannot work without decoder support so MODE_COMPRESS + // is the only valid choice. + if (opt_mode != MODE_COMPRESS) + message_fatal(_("Decompression support was disabled " + "at build time")); +#endif + +#ifdef HAVE_LZIP_DECODER + if (opt_mode == MODE_COMPRESS && opt_format == FORMAT_LZIP) + message_fatal(_("Compression of lzip files (.lz) " + "is not supported")); +#endif + + // Never remove the source file when the destination is not on disk. + // In test mode the data is written nowhere, but setting opt_stdout + // will make the rest of the code behave well. + if (opt_stdout || opt_mode == MODE_TEST) { + opt_keep_original = true; + opt_stdout = true; + } + + // When compressing, if no --format flag was used, or it + // was --format=auto, we compress to the .xz format. + if (opt_mode == MODE_COMPRESS && opt_format == FORMAT_AUTO) + opt_format = FORMAT_XZ; + + // Compression settings need to be validated (options themselves and + // their memory usage) when compressing to any file format. It has to + // be done also when uncompressing raw data, since for raw decoding + // the options given on the command line are used to know what kind + // of raw data we are supposed to decode. + if (opt_mode == MODE_COMPRESS || opt_format == FORMAT_RAW) + coder_set_compression_settings(); + + // If no filenames are given, use stdin. + if (argv[optind] == NULL && args->files_name == NULL) { + // We don't modify or free() the "-" constant. The caller + // modifies this so don't make the struct itself const. + static char *names_stdin[2] = { (char *)"-", NULL }; + args->arg_names = names_stdin; + args->arg_count = 1; + } else { + // We got at least one filename from the command line, or + // --files or --files0 was specified. + args->arg_names = argv + optind; + args->arg_count = (unsigned int)(argc - optind); + } + + return; +} + + +#ifndef NDEBUG +extern void +args_free(void) +{ + free(opt_block_list); + return; +} +#endif diff --git a/src/xz/args.h b/src/xz/args.h new file mode 100644 index 0000000..a1a5930 --- /dev/null +++ b/src/xz/args.h @@ -0,0 +1,44 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file args.h +/// \brief Argument parsing +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +typedef struct { + /// Filenames from command line + char **arg_names; + + /// Number of filenames from command line + unsigned int arg_count; + + /// Name of the file from which to read filenames. This is NULL + /// if --files or --files0 was not used. + const char *files_name; + + /// File opened for reading from which filenames are read. This is + /// non-NULL only if files_name is non-NULL. + FILE *files_file; + + /// Delimiter for filenames read from files_file + char files_delim; + +} args_info; + + +extern bool opt_stdout; +extern bool opt_force; +extern bool opt_keep_original; +// extern bool opt_recursive; +extern bool opt_robot; +extern bool opt_ignore_check; + +extern const char stdin_filename[]; + +extern void args_parse(args_info *args, int argc, char **argv); +extern void args_free(void); diff --git a/src/xz/coder.c b/src/xz/coder.c new file mode 100644 index 0000000..05f2288 --- /dev/null +++ b/src/xz/coder.c @@ -0,0 +1,1108 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file coder.c +/// \brief Compresses or uncompresses a file +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + + +/// Return value type for coder_init(). +enum coder_init_ret { + CODER_INIT_NORMAL, + CODER_INIT_PASSTHRU, + CODER_INIT_ERROR, +}; + + +enum operation_mode opt_mode = MODE_COMPRESS; +enum format_type opt_format = FORMAT_AUTO; +bool opt_auto_adjust = true; +bool opt_single_stream = false; +uint64_t opt_block_size = 0; +uint64_t *opt_block_list = NULL; + + +/// Stream used to communicate with liblzma +static lzma_stream strm = LZMA_STREAM_INIT; + +/// Filters needed for all encoding all formats, and also decoding in raw data +static lzma_filter filters[LZMA_FILTERS_MAX + 1]; + +/// Input and output buffers +static io_buf in_buf; +static io_buf out_buf; + +/// Number of filters. Zero indicates that we are using a preset. +static uint32_t filters_count = 0; + +/// Number of the preset (0-9) +static uint32_t preset_number = LZMA_PRESET_DEFAULT; + +/// Integrity check type +static lzma_check check; + +/// This becomes false if the --check=CHECK option is used. +static bool check_default = true; + +/// Indicates if unconsumed input is allowed to remain after +/// decoding has successfully finished. This is set for each file +/// in coder_init(). +static bool allow_trailing_input; + +#ifdef MYTHREAD_ENABLED +static lzma_mt mt_options = { + .flags = 0, + .timeout = 300, + .filters = filters, +}; +#endif + + +extern void +coder_set_check(lzma_check new_check) +{ + check = new_check; + check_default = false; + return; +} + + +static void +forget_filter_chain(void) +{ + // Setting a preset makes us forget a possibly defined custom + // filter chain. + while (filters_count > 0) { + --filters_count; + free(filters[filters_count].options); + filters[filters_count].options = NULL; + } + + return; +} + + +extern void +coder_set_preset(uint32_t new_preset) +{ + preset_number &= ~LZMA_PRESET_LEVEL_MASK; + preset_number |= new_preset; + forget_filter_chain(); + return; +} + + +extern void +coder_set_extreme(void) +{ + preset_number |= LZMA_PRESET_EXTREME; + forget_filter_chain(); + return; +} + + +extern void +coder_add_filter(lzma_vli id, void *options) +{ + if (filters_count == LZMA_FILTERS_MAX) + message_fatal(_("Maximum number of filters is four")); + + filters[filters_count].id = id; + filters[filters_count].options = options; + ++filters_count; + + // Setting a custom filter chain makes us forget the preset options. + // This makes a difference if one specifies e.g. "xz -9 --lzma2 -e" + // where the custom filter chain resets the preset level back to + // the default 6, making the example equivalent to "xz -6e". + preset_number = LZMA_PRESET_DEFAULT; + + return; +} + + +static void lzma_attribute((__noreturn__)) +memlimit_too_small(uint64_t memory_usage) +{ + message(V_ERROR, _("Memory usage limit is too low for the given " + "filter setup.")); + message_mem_needed(V_ERROR, memory_usage); + tuklib_exit(E_ERROR, E_ERROR, false); +} + + +extern void +coder_set_compression_settings(void) +{ +#ifdef HAVE_LZIP_DECODER + // .lz compression isn't supported. + assert(opt_format != FORMAT_LZIP); +#endif + + // The default check type is CRC64, but fallback to CRC32 + // if CRC64 isn't supported by the copy of liblzma we are + // using. CRC32 is always supported. + if (check_default) { + check = LZMA_CHECK_CRC64; + if (!lzma_check_is_supported(check)) + check = LZMA_CHECK_CRC32; + } + + // Options for LZMA1 or LZMA2 in case we are using a preset. + static lzma_options_lzma opt_lzma; + + if (filters_count == 0) { + // We are using a preset. This is not a good idea in raw mode + // except when playing around with things. Different versions + // of this software may use different options in presets, and + // thus make uncompressing the raw data difficult. + if (opt_format == FORMAT_RAW) { + // The message is shown only if warnings are allowed + // but the exit status isn't changed. + message(V_WARNING, _("Using a preset in raw mode " + "is discouraged.")); + message(V_WARNING, _("The exact options of the " + "presets may vary between software " + "versions.")); + } + + // Get the preset for LZMA1 or LZMA2. + if (lzma_lzma_preset(&opt_lzma, preset_number)) + message_bug(); + + // Use LZMA2 except with --format=lzma we use LZMA1. + filters[0].id = opt_format == FORMAT_LZMA + ? LZMA_FILTER_LZMA1 : LZMA_FILTER_LZMA2; + filters[0].options = &opt_lzma; + filters_count = 1; + } + + // Terminate the filter options array. + filters[filters_count].id = LZMA_VLI_UNKNOWN; + + // If we are using the .lzma format, allow exactly one filter + // which has to be LZMA1. + if (opt_format == FORMAT_LZMA && (filters_count != 1 + || filters[0].id != LZMA_FILTER_LZMA1)) + message_fatal(_("The .lzma format supports only " + "the LZMA1 filter")); + + // If we are using the .xz format, make sure that there is no LZMA1 + // filter to prevent LZMA_PROG_ERROR. + if (opt_format == FORMAT_XZ) + for (size_t i = 0; i < filters_count; ++i) + if (filters[i].id == LZMA_FILTER_LZMA1) + message_fatal(_("LZMA1 cannot be used " + "with the .xz format")); + + // Print the selected filter chain. + message_filters_show(V_DEBUG, filters); + + // The --flush-timeout option requires LZMA_SYNC_FLUSH support + // from the filter chain. Currently threaded encoder doesn't support + // LZMA_SYNC_FLUSH so single-threaded mode must be used. + if (opt_mode == MODE_COMPRESS && opt_flush_timeout != 0) { + for (size_t i = 0; i < filters_count; ++i) { + switch (filters[i].id) { + case LZMA_FILTER_LZMA2: + case LZMA_FILTER_DELTA: + break; + + default: + message_fatal(_("The filter chain is " + "incompatible with --flush-timeout")); + } + } + + if (hardware_threads_is_mt()) { + message(V_WARNING, _("Switching to single-threaded " + "mode due to --flush-timeout")); + hardware_threads_set(1); + } + } + + // Get the memory usage. Note that if --format=raw was used, + // we can be decompressing. + // + // If multithreaded .xz compression is done, this value will be + // replaced. + uint64_t memory_limit = hardware_memlimit_get(opt_mode); + uint64_t memory_usage = UINT64_MAX; + if (opt_mode == MODE_COMPRESS) { +#ifdef HAVE_ENCODERS +# ifdef MYTHREAD_ENABLED + if (opt_format == FORMAT_XZ && hardware_threads_is_mt()) { + memory_limit = hardware_memlimit_mtenc_get(); + mt_options.threads = hardware_threads_get(); + mt_options.block_size = opt_block_size; + mt_options.check = check; + memory_usage = lzma_stream_encoder_mt_memusage( + &mt_options); + if (memory_usage != UINT64_MAX) + message(V_DEBUG, _("Using up to %" PRIu32 + " threads."), + mt_options.threads); + } else +# endif + { + memory_usage = lzma_raw_encoder_memusage(filters); + } +#endif + } else { +#ifdef HAVE_DECODERS + memory_usage = lzma_raw_decoder_memusage(filters); +#endif + } + + if (memory_usage == UINT64_MAX) + message_fatal(_("Unsupported filter chain or filter options")); + + // Print memory usage info before possible dictionary + // size auto-adjusting. + // + // NOTE: If only encoder support was built, we cannot show the + // what the decoder memory usage will be. + message_mem_needed(V_DEBUG, memory_usage); +#ifdef HAVE_DECODERS + if (opt_mode == MODE_COMPRESS) { + const uint64_t decmem = lzma_raw_decoder_memusage(filters); + if (decmem != UINT64_MAX) + message(V_DEBUG, _("Decompression will need " + "%s MiB of memory."), uint64_to_str( + round_up_to_mib(decmem), 0)); + } +#endif + + if (memory_usage <= memory_limit) + return; + + // With --format=raw settings are never adjusted to meet + // the memory usage limit. + if (opt_format == FORMAT_RAW) + memlimit_too_small(memory_usage); + + assert(opt_mode == MODE_COMPRESS); + +#ifdef HAVE_ENCODERS +# ifdef MYTHREAD_ENABLED + if (opt_format == FORMAT_XZ && hardware_threads_is_mt()) { + // Try to reduce the number of threads before + // adjusting the compression settings down. + while (mt_options.threads > 1) { + // Reduce the number of threads by one and check + // the memory usage. + --mt_options.threads; + memory_usage = lzma_stream_encoder_mt_memusage( + &mt_options); + if (memory_usage == UINT64_MAX) + message_bug(); + + if (memory_usage <= memory_limit) { + // The memory usage is now low enough. + message(V_WARNING, _("Reduced the number of " + "threads from %s to %s to not exceed " + "the memory usage limit of %s MiB"), + uint64_to_str( + hardware_threads_get(), 0), + uint64_to_str(mt_options.threads, 1), + uint64_to_str(round_up_to_mib( + memory_limit), 2)); + return; + } + } + + // If the memory usage limit is only a soft limit (automatic + // number of threads and no --memlimit-compress), the limit + // is only used to reduce the number of threads and once at + // just one thread, the limit is completely ignored. This + // way -T0 won't use insane amount of memory but at the same + // time the soft limit will never make xz fail and never make + // xz change settings that would affect the compressed output. + if (hardware_memlimit_mtenc_is_default()) { + message(V_WARNING, _("Reduced the number of threads " + "from %s to one. The automatic memory usage " + "limit of %s MiB is still being exceeded. " + "%s MiB of memory is required. " + "Continuing anyway."), + uint64_to_str(hardware_threads_get(), 0), + uint64_to_str( + round_up_to_mib(memory_limit), 1), + uint64_to_str( + round_up_to_mib(memory_usage), 2)); + return; + } + + // If --no-adjust was used, we cannot drop to single-threaded + // mode since it produces different compressed output. + // + // NOTE: In xz 5.2.x, --no-adjust also prevented reducing + // the number of threads. This changed in 5.3.3alpha. + if (!opt_auto_adjust) + memlimit_too_small(memory_usage); + + // Switch to single-threaded mode. It uses + // less memory than using one thread in + // the multithreaded mode but the output + // is also different. + hardware_threads_set(1); + memory_usage = lzma_raw_encoder_memusage(filters); + message(V_WARNING, _("Switching to single-threaded mode " + "to not exceed the memory usage limit of %s MiB"), + uint64_to_str(round_up_to_mib(memory_limit), 0)); + } +# endif + + if (memory_usage <= memory_limit) + return; + + // Don't adjust LZMA2 or LZMA1 dictionary size if --no-adjust + // was specified as that would change the compressed output. + if (!opt_auto_adjust) + memlimit_too_small(memory_usage); + + // Look for the last filter if it is LZMA2 or LZMA1, so we can make + // it use less RAM. With other filters we don't know what to do. + size_t i = 0; + while (filters[i].id != LZMA_FILTER_LZMA2 + && filters[i].id != LZMA_FILTER_LZMA1) { + if (filters[i].id == LZMA_VLI_UNKNOWN) + memlimit_too_small(memory_usage); + + ++i; + } + + // Decrease the dictionary size until we meet the memory + // usage limit. First round down to full mebibytes. + lzma_options_lzma *opt = filters[i].options; + const uint32_t orig_dict_size = opt->dict_size; + opt->dict_size &= ~((UINT32_C(1) << 20) - 1); + while (true) { + // If it is below 1 MiB, auto-adjusting failed. We could be + // more sophisticated and scale it down even more, but let's + // see if many complain about this version. + // + // FIXME: Displays the scaled memory usage instead + // of the original. + if (opt->dict_size < (UINT32_C(1) << 20)) + memlimit_too_small(memory_usage); + + memory_usage = lzma_raw_encoder_memusage(filters); + if (memory_usage == UINT64_MAX) + message_bug(); + + // Accept it if it is low enough. + if (memory_usage <= memory_limit) + break; + + // Otherwise 1 MiB down and try again. I hope this + // isn't too slow method for cases where the original + // dict_size is very big. + opt->dict_size -= UINT32_C(1) << 20; + } + + // Tell the user that we decreased the dictionary size. + message(V_WARNING, _("Adjusted LZMA%c dictionary size " + "from %s MiB to %s MiB to not exceed " + "the memory usage limit of %s MiB"), + filters[i].id == LZMA_FILTER_LZMA2 + ? '2' : '1', + uint64_to_str(orig_dict_size >> 20, 0), + uint64_to_str(opt->dict_size >> 20, 1), + uint64_to_str(round_up_to_mib(memory_limit), 2)); +#endif + + return; +} + + +#ifdef HAVE_DECODERS +/// Return true if the data in in_buf seems to be in the .xz format. +static bool +is_format_xz(void) +{ + // Specify the magic as hex to be compatible with EBCDIC systems. + static const uint8_t magic[6] = { 0xFD, 0x37, 0x7A, 0x58, 0x5A, 0x00 }; + return strm.avail_in >= sizeof(magic) + && memcmp(in_buf.u8, magic, sizeof(magic)) == 0; +} + + +/// Return true if the data in in_buf seems to be in the .lzma format. +static bool +is_format_lzma(void) +{ + // The .lzma header is 13 bytes. + if (strm.avail_in < 13) + return false; + + // Decode the LZMA1 properties. + lzma_filter filter = { .id = LZMA_FILTER_LZMA1 }; + if (lzma_properties_decode(&filter, NULL, in_buf.u8, 5) != LZMA_OK) + return false; + + // A hack to ditch tons of false positives: We allow only dictionary + // sizes that are 2^n or 2^n + 2^(n-1) or UINT32_MAX. LZMA_Alone + // created only files with 2^n, but accepts any dictionary size. + // If someone complains, this will be reconsidered. + lzma_options_lzma *opt = filter.options; + const uint32_t dict_size = opt->dict_size; + free(opt); + + if (dict_size != UINT32_MAX) { + uint32_t d = dict_size - 1; + d |= d >> 2; + d |= d >> 3; + d |= d >> 4; + d |= d >> 8; + d |= d >> 16; + ++d; + if (d != dict_size || dict_size == 0) + return false; + } + + // Another hack to ditch false positives: Assume that if the + // uncompressed size is known, it must be less than 256 GiB. + // Again, if someone complains, this will be reconsidered. + uint64_t uncompressed_size = 0; + for (size_t i = 0; i < 8; ++i) + uncompressed_size |= (uint64_t)(in_buf.u8[5 + i]) << (i * 8); + + if (uncompressed_size != UINT64_MAX + && uncompressed_size > (UINT64_C(1) << 38)) + return false; + + return true; +} + + +#ifdef HAVE_LZIP_DECODER +/// Return true if the data in in_buf seems to be in the .lz format. +static bool +is_format_lzip(void) +{ + static const uint8_t magic[4] = { 0x4C, 0x5A, 0x49, 0x50 }; + return strm.avail_in >= sizeof(magic) + && memcmp(in_buf.u8, magic, sizeof(magic)) == 0; +} +#endif +#endif + + +/// Detect the input file type (for now, this done only when decompressing), +/// and initialize an appropriate coder. Return value indicates if a normal +/// liblzma-based coder was initialized (CODER_INIT_NORMAL), if passthru +/// mode should be used (CODER_INIT_PASSTHRU), or if an error occurred +/// (CODER_INIT_ERROR). +static enum coder_init_ret +coder_init(file_pair *pair) +{ + lzma_ret ret = LZMA_PROG_ERROR; + + // In most cases if there is input left when coding finishes, + // something has gone wrong. Exceptions are --single-stream + // and decoding .lz files which can contain trailing non-.lz data. + // These will be handled later in this function. + allow_trailing_input = false; + + if (opt_mode == MODE_COMPRESS) { +#ifdef HAVE_ENCODERS + switch (opt_format) { + case FORMAT_AUTO: + // args.c ensures this. + assert(0); + break; + + case FORMAT_XZ: +# ifdef MYTHREAD_ENABLED + if (hardware_threads_is_mt()) + ret = lzma_stream_encoder_mt( + &strm, &mt_options); + else +# endif + ret = lzma_stream_encoder( + &strm, filters, check); + break; + + case FORMAT_LZMA: + ret = lzma_alone_encoder(&strm, filters[0].options); + break; + +# ifdef HAVE_LZIP_DECODER + case FORMAT_LZIP: + // args.c should disallow this. + assert(0); + ret = LZMA_PROG_ERROR; + break; +# endif + + case FORMAT_RAW: + ret = lzma_raw_encoder(&strm, filters); + break; + } +#endif + } else { +#ifdef HAVE_DECODERS + uint32_t flags = 0; + + // It seems silly to warn about unsupported check if the + // check won't be verified anyway due to --ignore-check. + if (opt_ignore_check) + flags |= LZMA_IGNORE_CHECK; + else + flags |= LZMA_TELL_UNSUPPORTED_CHECK; + + if (opt_single_stream) + allow_trailing_input = true; + else + flags |= LZMA_CONCATENATED; + + // We abuse FORMAT_AUTO to indicate unknown file format, + // for which we may consider passthru mode. + enum format_type init_format = FORMAT_AUTO; + + switch (opt_format) { + case FORMAT_AUTO: + // .lz is checked before .lzma since .lzma detection + // is more complicated (no magic bytes). + if (is_format_xz()) + init_format = FORMAT_XZ; +# ifdef HAVE_LZIP_DECODER + else if (is_format_lzip()) + init_format = FORMAT_LZIP; +# endif + else if (is_format_lzma()) + init_format = FORMAT_LZMA; + break; + + case FORMAT_XZ: + if (is_format_xz()) + init_format = FORMAT_XZ; + break; + + case FORMAT_LZMA: + if (is_format_lzma()) + init_format = FORMAT_LZMA; + break; + +# ifdef HAVE_LZIP_DECODER + case FORMAT_LZIP: + if (is_format_lzip()) + init_format = FORMAT_LZIP; + break; +# endif + + case FORMAT_RAW: + init_format = FORMAT_RAW; + break; + } + + switch (init_format) { + case FORMAT_AUTO: + // Unknown file format. If --decompress --stdout + // --force have been given, then we copy the input + // as is to stdout. Checking for MODE_DECOMPRESS + // is needed, because we don't want to do use + // passthru mode with --test. + if (opt_mode == MODE_DECOMPRESS + && opt_stdout && opt_force) { + // These are needed for progress info. + strm.total_in = 0; + strm.total_out = 0; + return CODER_INIT_PASSTHRU; + } + + ret = LZMA_FORMAT_ERROR; + break; + + case FORMAT_XZ: +# ifdef MYTHREAD_ENABLED + mt_options.flags = flags; + + mt_options.threads = hardware_threads_get(); + mt_options.memlimit_stop + = hardware_memlimit_get(MODE_DECOMPRESS); + + // If single-threaded mode was requested, set the + // memlimit for threading to zero. This forces the + // decoder to use single-threaded mode which matches + // the behavior of lzma_stream_decoder(). + // + // Otherwise use the limit for threaded decompression + // which has a sane default (users are still free to + // make it insanely high though). + mt_options.memlimit_threading + = mt_options.threads == 1 + ? 0 : hardware_memlimit_mtdec_get(); + + ret = lzma_stream_decoder_mt(&strm, &mt_options); +# else + ret = lzma_stream_decoder(&strm, + hardware_memlimit_get( + MODE_DECOMPRESS), flags); +# endif + break; + + case FORMAT_LZMA: + ret = lzma_alone_decoder(&strm, + hardware_memlimit_get( + MODE_DECOMPRESS)); + break; + +# ifdef HAVE_LZIP_DECODER + case FORMAT_LZIP: + allow_trailing_input = true; + ret = lzma_lzip_decoder(&strm, + hardware_memlimit_get( + MODE_DECOMPRESS), flags); + break; +# endif + + case FORMAT_RAW: + // Memory usage has already been checked in + // coder_set_compression_settings(). + ret = lzma_raw_decoder(&strm, filters); + break; + } + + // Try to decode the headers. This will catch too low + // memory usage limit in case it happens in the first + // Block of the first Stream, which is where it very + // probably will happen if it is going to happen. + // + // This will also catch unsupported check type which + // we treat as a warning only. If there are empty + // concatenated Streams with unsupported check type then + // the message can be shown more than once here. The loop + // is used in case there is first a warning about + // unsupported check type and then the first Block + // would exceed the memlimit. + if (ret == LZMA_OK && init_format != FORMAT_RAW) { + strm.next_out = NULL; + strm.avail_out = 0; + while ((ret = lzma_code(&strm, LZMA_RUN)) + == LZMA_UNSUPPORTED_CHECK) + message_warning("%s: %s", pair->src_name, + message_strm(ret)); + + // With --single-stream lzma_code won't wait for + // LZMA_FINISH and thus it can return LZMA_STREAM_END + // if the file has no uncompressed data inside. + // So treat LZMA_STREAM_END as LZMA_OK here. + // When lzma_code() is called again in coder_normal() + // it will return LZMA_STREAM_END again. + if (ret == LZMA_STREAM_END) + ret = LZMA_OK; + } +#endif + } + + if (ret != LZMA_OK) { + message_error("%s: %s", pair->src_name, message_strm(ret)); + if (ret == LZMA_MEMLIMIT_ERROR) + message_mem_needed(V_ERROR, lzma_memusage(&strm)); + + return CODER_INIT_ERROR; + } + + return CODER_INIT_NORMAL; +} + + +/// Resolve conflicts between opt_block_size and opt_block_list in single +/// threaded mode. We want to default to opt_block_list, except when it is +/// larger than opt_block_size. If this is the case for the current Block +/// at *list_pos, then we break into smaller Blocks. Otherwise advance +/// to the next Block in opt_block_list, and break apart if needed. +static void +split_block(uint64_t *block_remaining, + uint64_t *next_block_remaining, + size_t *list_pos) +{ + if (*next_block_remaining > 0) { + // The Block at *list_pos has previously been split up. + assert(!hardware_threads_is_mt()); + assert(opt_block_size > 0); + assert(opt_block_list != NULL); + + if (*next_block_remaining > opt_block_size) { + // We have to split the current Block at *list_pos + // into another opt_block_size length Block. + *block_remaining = opt_block_size; + } else { + // This is the last remaining split Block for the + // Block at *list_pos. + *block_remaining = *next_block_remaining; + } + + *next_block_remaining -= *block_remaining; + + } else { + // The Block at *list_pos has been finished. Go to the next + // entry in the list. If the end of the list has been reached, + // reuse the size of the last Block. + if (opt_block_list[*list_pos + 1] != 0) + ++*list_pos; + + *block_remaining = opt_block_list[*list_pos]; + + // If in single-threaded mode, split up the Block if needed. + // This is not needed in multi-threaded mode because liblzma + // will do this due to how threaded encoding works. + if (!hardware_threads_is_mt() && opt_block_size > 0 + && *block_remaining > opt_block_size) { + *next_block_remaining + = *block_remaining - opt_block_size; + *block_remaining = opt_block_size; + } + } +} + + +static bool +coder_write_output(file_pair *pair) +{ + if (opt_mode != MODE_TEST) { + if (io_write(pair, &out_buf, IO_BUFFER_SIZE - strm.avail_out)) + return true; + } + + strm.next_out = out_buf.u8; + strm.avail_out = IO_BUFFER_SIZE; + return false; +} + + +/// Compress or decompress using liblzma. +static bool +coder_normal(file_pair *pair) +{ + // Encoder needs to know when we have given all the input to it. + // The decoders need to know it too when we are using + // LZMA_CONCATENATED. We need to check for src_eof here, because + // the first input chunk has been already read if decompressing, + // and that may have been the only chunk we will read. + lzma_action action = pair->src_eof ? LZMA_FINISH : LZMA_RUN; + + lzma_ret ret; + + // Assume that something goes wrong. + bool success = false; + + // block_remaining indicates how many input bytes to encode before + // finishing the current .xz Block. The Block size is set with + // --block-size=SIZE and --block-list. They have an effect only when + // compressing to the .xz format. If block_remaining == UINT64_MAX, + // only a single block is created. + uint64_t block_remaining = UINT64_MAX; + + // next_block_remaining for when we are in single-threaded mode and + // the Block in --block-list is larger than the --block-size=SIZE. + uint64_t next_block_remaining = 0; + + // Position in opt_block_list. Unused if --block-list wasn't used. + size_t list_pos = 0; + + // Handle --block-size for single-threaded mode and the first step + // of --block-list. + if (opt_mode == MODE_COMPRESS && opt_format == FORMAT_XZ) { + // --block-size doesn't do anything here in threaded mode, + // because the threaded encoder will take care of splitting + // to fixed-sized Blocks. + if (!hardware_threads_is_mt() && opt_block_size > 0) + block_remaining = opt_block_size; + + // If --block-list was used, start with the first size. + // + // For threaded case, --block-size specifies how big Blocks + // the encoder needs to be prepared to create at maximum + // and --block-list will simultaneously cause new Blocks + // to be started at specified intervals. To keep things + // logical, the same is done in single-threaded mode. The + // output is still not identical because in single-threaded + // mode the size info isn't written into Block Headers. + if (opt_block_list != NULL) { + if (block_remaining < opt_block_list[list_pos]) { + assert(!hardware_threads_is_mt()); + next_block_remaining = opt_block_list[list_pos] + - block_remaining; + } else { + block_remaining = opt_block_list[list_pos]; + } + } + } + + strm.next_out = out_buf.u8; + strm.avail_out = IO_BUFFER_SIZE; + + while (!user_abort) { + // Fill the input buffer if it is empty and we aren't + // flushing or finishing. + if (strm.avail_in == 0 && action == LZMA_RUN) { + strm.next_in = in_buf.u8; + strm.avail_in = io_read(pair, &in_buf, + my_min(block_remaining, + IO_BUFFER_SIZE)); + + if (strm.avail_in == SIZE_MAX) + break; + + if (pair->src_eof) { + action = LZMA_FINISH; + + } else if (block_remaining != UINT64_MAX) { + // Start a new Block after every + // opt_block_size bytes of input. + block_remaining -= strm.avail_in; + if (block_remaining == 0) + action = LZMA_FULL_BARRIER; + } + + if (action == LZMA_RUN && pair->flush_needed) + action = LZMA_SYNC_FLUSH; + } + + // Let liblzma do the actual work. + ret = lzma_code(&strm, action); + + // Write out if the output buffer became full. + if (strm.avail_out == 0) { + if (coder_write_output(pair)) + break; + } + + if (ret == LZMA_STREAM_END && (action == LZMA_SYNC_FLUSH + || action == LZMA_FULL_BARRIER)) { + if (action == LZMA_SYNC_FLUSH) { + // Flushing completed. Write the pending data + // out immediately so that the reading side + // can decompress everything compressed so far. + if (coder_write_output(pair)) + break; + + // Mark that we haven't seen any new input + // since the previous flush. + pair->src_has_seen_input = false; + pair->flush_needed = false; + } else { + // Start a new Block after LZMA_FULL_BARRIER. + if (opt_block_list == NULL) { + assert(!hardware_threads_is_mt()); + assert(opt_block_size > 0); + block_remaining = opt_block_size; + } else { + split_block(&block_remaining, + &next_block_remaining, + &list_pos); + } + } + + // Start a new Block after LZMA_FULL_FLUSH or continue + // the same block after LZMA_SYNC_FLUSH. + action = LZMA_RUN; + + } else if (ret != LZMA_OK) { + // Determine if the return value indicates that we + // won't continue coding. LZMA_NO_CHECK would be + // here too if LZMA_TELL_ANY_CHECK was used. + const bool stop = ret != LZMA_UNSUPPORTED_CHECK; + + if (stop) { + // Write the remaining bytes even if something + // went wrong, because that way the user gets + // as much data as possible, which can be good + // when trying to get at least some useful + // data out of damaged files. + if (coder_write_output(pair)) + break; + } + + if (ret == LZMA_STREAM_END) { + if (allow_trailing_input) { + io_fix_src_pos(pair, strm.avail_in); + success = true; + break; + } + + // Check that there is no trailing garbage. + // This is needed for LZMA_Alone and raw + // streams. This is *not* done with .lz files + // as that format specifically requires + // allowing trailing garbage. + if (strm.avail_in == 0 && !pair->src_eof) { + // Try reading one more byte. + // Hopefully we don't get any more + // input, and thus pair->src_eof + // becomes true. + strm.avail_in = io_read( + pair, &in_buf, 1); + if (strm.avail_in == SIZE_MAX) + break; + + assert(strm.avail_in == 0 + || strm.avail_in == 1); + } + + if (strm.avail_in == 0) { + assert(pair->src_eof); + success = true; + break; + } + + // We hadn't reached the end of the file. + ret = LZMA_DATA_ERROR; + assert(stop); + } + + // If we get here and stop is true, something went + // wrong and we print an error. Otherwise it's just + // a warning and coding can continue. + if (stop) { + message_error("%s: %s", pair->src_name, + message_strm(ret)); + } else { + message_warning("%s: %s", pair->src_name, + message_strm(ret)); + + // When compressing, all possible errors set + // stop to true. + assert(opt_mode != MODE_COMPRESS); + } + + if (ret == LZMA_MEMLIMIT_ERROR) { + // Display how much memory it would have + // actually needed. + message_mem_needed(V_ERROR, + lzma_memusage(&strm)); + } + + if (stop) + break; + } + + // Show progress information under certain conditions. + message_progress_update(); + } + + return success; +} + + +/// Copy from input file to output file without processing the data in any +/// way. This is used only when trying to decompress unrecognized files +/// with --decompress --stdout --force, so the output is always stdout. +static bool +coder_passthru(file_pair *pair) +{ + while (strm.avail_in != 0) { + if (user_abort) + return false; + + if (io_write(pair, &in_buf, strm.avail_in)) + return false; + + strm.total_in += strm.avail_in; + strm.total_out = strm.total_in; + message_progress_update(); + + strm.avail_in = io_read(pair, &in_buf, IO_BUFFER_SIZE); + if (strm.avail_in == SIZE_MAX) + return false; + } + + return true; +} + + +extern void +coder_run(const char *filename) +{ + // Set and possibly print the filename for the progress message. + message_filename(filename); + + // Try to open the input file. + file_pair *pair = io_open_src(filename); + if (pair == NULL) + return; + + // Assume that something goes wrong. + bool success = false; + + if (opt_mode == MODE_COMPRESS) { + strm.next_in = NULL; + strm.avail_in = 0; + } else { + // Read the first chunk of input data. This is needed + // to detect the input file type. + strm.next_in = in_buf.u8; + strm.avail_in = io_read(pair, &in_buf, IO_BUFFER_SIZE); + } + + if (strm.avail_in != SIZE_MAX) { + // Initialize the coder. This will detect the file format + // and, in decompression or testing mode, check the memory + // usage of the first Block too. This way we don't try to + // open the destination file if we see that coding wouldn't + // work at all anyway. This also avoids deleting the old + // "target" file if --force was used. + const enum coder_init_ret init_ret = coder_init(pair); + + if (init_ret != CODER_INIT_ERROR && !user_abort) { + // Don't open the destination file when --test + // is used. + if (opt_mode == MODE_TEST || !io_open_dest(pair)) { + // Remember the current time. It is needed + // for progress indicator. + mytime_set_start_time(); + + // Initialize the progress indicator. + // + // NOTE: When reading from stdin, fstat() + // isn't called on it and thus src_st.st_size + // is zero. If stdin pointed to a regular + // file, it would still be possible to know + // the file size but then we would also need + // to take into account the current reading + // position since with stdin it isn't + // necessarily at the beginning of the file. + const bool is_passthru = init_ret + == CODER_INIT_PASSTHRU; + const uint64_t in_size + = pair->src_st.st_size <= 0 + ? 0 : (uint64_t)(pair->src_st.st_size); + message_progress_start(&strm, + is_passthru, in_size); + + // Do the actual coding or passthru. + if (is_passthru) + success = coder_passthru(pair); + else + success = coder_normal(pair); + + message_progress_end(success); + } + } + } + + // Close the file pair. It needs to know if coding was successful to + // know if the source or target file should be unlinked. + io_close(pair, success); + + return; +} + + +#ifndef NDEBUG +extern void +coder_free(void) +{ + lzma_end(&strm); + return; +} +#endif diff --git a/src/xz/coder.h b/src/xz/coder.h new file mode 100644 index 0000000..9e69e57 --- /dev/null +++ b/src/xz/coder.h @@ -0,0 +1,78 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file coder.h +/// \brief Compresses or uncompresses a file +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +enum operation_mode { + MODE_COMPRESS, + MODE_DECOMPRESS, + MODE_TEST, + MODE_LIST, +}; + + +// NOTE: The order of these is significant in suffix.c. +enum format_type { + FORMAT_AUTO, + FORMAT_XZ, + FORMAT_LZMA, +#ifdef HAVE_LZIP_DECODER + FORMAT_LZIP, +#endif + FORMAT_RAW, +}; + + +/// Operation mode of the command line tool. This is set in args.c and read +/// in several files. +extern enum operation_mode opt_mode; + +/// File format to use when encoding or what format(s) to accept when +/// decoding. This is a global because it's needed also in suffix.c. +/// This is set in args.c. +extern enum format_type opt_format; + +/// If true, the compression settings are automatically adjusted down if +/// they exceed the memory usage limit. +extern bool opt_auto_adjust; + +/// If true, stop after decoding the first stream. +extern bool opt_single_stream; + +/// If non-zero, start a new .xz Block after every opt_block_size bytes +/// of input. This has an effect only when compressing to the .xz format. +extern uint64_t opt_block_size; + +/// This is non-NULL if --block-list was used. This contains the Block sizes +/// as an array that is terminated with 0. +extern uint64_t *opt_block_list; + +/// Set the integrity check type used when compressing +extern void coder_set_check(lzma_check check); + +/// Set preset number +extern void coder_set_preset(uint32_t new_preset); + +/// Enable extreme mode +extern void coder_set_extreme(void); + +/// Add a filter to the custom filter chain +extern void coder_add_filter(lzma_vli id, void *options); + +/// +extern void coder_set_compression_settings(void); + +/// Compress or decompress the given file +extern void coder_run(const char *filename); + +#ifndef NDEBUG +/// Free the memory allocated for the coder and kill the worker threads. +extern void coder_free(void); +#endif diff --git a/src/xz/file_io.c b/src/xz/file_io.c new file mode 100644 index 0000000..a5841b3 --- /dev/null +++ b/src/xz/file_io.c @@ -0,0 +1,1366 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file file_io.c +/// \brief File opening, unlinking, and closing +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + +#include + +#ifdef TUKLIB_DOSLIKE +# include +#else +# include +static bool warn_fchown; +#endif + +#if defined(HAVE_FUTIMES) || defined(HAVE_FUTIMESAT) || defined(HAVE_UTIMES) +# include +#elif defined(HAVE__FUTIME) +# include +#elif defined(HAVE_UTIME) +# include +#endif + +#ifdef HAVE_CAPSICUM +# ifdef HAVE_SYS_CAPSICUM_H +# include +# else +# include +# endif +#endif + +#include "tuklib_open_stdxxx.h" + +#ifndef O_BINARY +# define O_BINARY 0 +#endif + +#ifndef O_NOCTTY +# define O_NOCTTY 0 +#endif + +// Using this macro to silence a warning from gcc -Wlogical-op. +#if EAGAIN == EWOULDBLOCK +# define IS_EAGAIN_OR_EWOULDBLOCK(e) ((e) == EAGAIN) +#else +# define IS_EAGAIN_OR_EWOULDBLOCK(e) \ + ((e) == EAGAIN || (e) == EWOULDBLOCK) +#endif + + +typedef enum { + IO_WAIT_MORE, // Reading or writing is possible. + IO_WAIT_ERROR, // Error or user_abort + IO_WAIT_TIMEOUT, // poll() timed out +} io_wait_ret; + + +/// If true, try to create sparse files when decompressing. +static bool try_sparse = true; + +#ifdef ENABLE_SANDBOX +/// True if the conditions for sandboxing (described in main()) have been met. +static bool sandbox_allowed = false; +#endif + +#ifndef TUKLIB_DOSLIKE +/// File status flags of standard input. This is used by io_open_src() +/// and io_close_src(). +static int stdin_flags; +static bool restore_stdin_flags = false; + +/// Original file status flags of standard output. This is used by +/// io_open_dest() and io_close_dest() to save and restore the flags. +static int stdout_flags; +static bool restore_stdout_flags = false; + +/// Self-pipe used together with the user_abort variable to avoid +/// race conditions with signal handling. +static int user_abort_pipe[2]; +#endif + + +static bool io_write_buf(file_pair *pair, const uint8_t *buf, size_t size); + + +extern void +io_init(void) +{ + // Make sure that stdin, stdout, and stderr are connected to + // a valid file descriptor. Exit immediately with exit code ERROR + // if we cannot make the file descriptors valid. Maybe we should + // print an error message, but our stderr could be screwed anyway. + tuklib_open_stdxxx(E_ERROR); + +#ifndef TUKLIB_DOSLIKE + // If fchown() fails setting the owner, we warn about it only if + // we are root. + warn_fchown = geteuid() == 0; + + // Create a pipe for the self-pipe trick. + if (pipe(user_abort_pipe)) + message_fatal(_("Error creating a pipe: %s"), + strerror(errno)); + + // Make both ends of the pipe non-blocking. + for (unsigned i = 0; i < 2; ++i) { + int flags = fcntl(user_abort_pipe[i], F_GETFL); + if (flags == -1 || fcntl(user_abort_pipe[i], F_SETFL, + flags | O_NONBLOCK) == -1) + message_fatal(_("Error creating a pipe: %s"), + strerror(errno)); + } +#endif + +#ifdef __DJGPP__ + // Avoid doing useless things when statting files. + // This isn't important but doesn't hurt. + _djstat_flags = _STAT_EXEC_EXT | _STAT_EXEC_MAGIC | _STAT_DIRSIZE; +#endif + + return; +} + + +#ifndef TUKLIB_DOSLIKE +extern void +io_write_to_user_abort_pipe(void) +{ + // If the write() fails, it's probably due to the pipe being full. + // Failing in that case is fine. If the reason is something else, + // there's not much we can do since this is called in a signal + // handler. So ignore the errors and try to avoid warnings with + // GCC and glibc when _FORTIFY_SOURCE=2 is used. + uint8_t b = '\0'; + const int ret = write(user_abort_pipe[1], &b, 1); + (void)ret; + return; +} +#endif + + +extern void +io_no_sparse(void) +{ + try_sparse = false; + return; +} + + +#ifdef ENABLE_SANDBOX +extern void +io_allow_sandbox(void) +{ + sandbox_allowed = true; + return; +} + + +/// Enables operating-system-specific sandbox if it is possible. +/// src_fd is the file descriptor of the input file. +static void +io_sandbox_enter(int src_fd) +{ + if (!sandbox_allowed) { + // This message is more often annoying than useful so + // it's commented out. It can be useful when developing + // the sandboxing code. + //message(V_DEBUG, _("Sandbox is disabled due " + // "to incompatible command line arguments")); + return; + } + + const char dummy_str[] = "x"; + + // Try to ensure that both libc and xz locale files have been + // loaded when NLS is enabled. + snprintf(NULL, 0, "%s%s", _(dummy_str), strerror(EINVAL)); + + // Try to ensure that iconv data files needed for handling multibyte + // characters have been loaded. This is needed at least with glibc. + tuklib_mbstr_width(dummy_str, NULL); + +#ifdef HAVE_CAPSICUM + // Capsicum needs FreeBSD 10.0 or later. + cap_rights_t rights; + + if (cap_rights_limit(src_fd, cap_rights_init(&rights, + CAP_EVENT, CAP_FCNTL, CAP_LOOKUP, CAP_READ, CAP_SEEK))) + goto error; + + if (cap_rights_limit(STDOUT_FILENO, cap_rights_init(&rights, + CAP_EVENT, CAP_FCNTL, CAP_FSTAT, CAP_LOOKUP, + CAP_WRITE, CAP_SEEK))) + goto error; + + if (cap_rights_limit(user_abort_pipe[0], cap_rights_init(&rights, + CAP_EVENT))) + goto error; + + if (cap_rights_limit(user_abort_pipe[1], cap_rights_init(&rights, + CAP_WRITE))) + goto error; + + if (cap_enter()) + goto error; + +#elif defined(HAVE_PLEDGE) + // pledge() was introduced in OpenBSD 5.9. + // + // main() unconditionally calls pledge() with fairly relaxed + // promises which work in all situations. Here we make the + // sandbox more strict. + if (pledge("stdio", "")) + goto error; + + (void)src_fd; + +#else +# error ENABLE_SANDBOX is defined but no sandboxing method was found. +#endif + + // This message is annoying in xz -lvv. + //message(V_DEBUG, _("Sandbox was successfully enabled")); + return; + +error: + message_fatal(_("Failed to enable the sandbox")); +} +#endif // ENABLE_SANDBOX + + +#ifndef TUKLIB_DOSLIKE +/// \brief Waits for input or output to become available or for a signal +/// +/// This uses the self-pipe trick to avoid a race condition that can occur +/// if a signal is caught after user_abort has been checked but before e.g. +/// read() has been called. In that situation read() could block unless +/// non-blocking I/O is used. With non-blocking I/O something like select() +/// or poll() is needed to avoid a busy-wait loop, and the same race condition +/// pops up again. There are pselect() (POSIX-1.2001) and ppoll() (not in +/// POSIX) but neither is portable enough in 2013. The self-pipe trick is +/// old and very portable. +static io_wait_ret +io_wait(file_pair *pair, int timeout, bool is_reading) +{ + struct pollfd pfd[2]; + + if (is_reading) { + pfd[0].fd = pair->src_fd; + pfd[0].events = POLLIN; + } else { + pfd[0].fd = pair->dest_fd; + pfd[0].events = POLLOUT; + } + + pfd[1].fd = user_abort_pipe[0]; + pfd[1].events = POLLIN; + + while (true) { + const int ret = poll(pfd, 2, timeout); + + if (user_abort) + return IO_WAIT_ERROR; + + if (ret == -1) { + if (errno == EINTR || errno == EAGAIN) + continue; + + message_error(_("%s: poll() failed: %s"), + is_reading ? pair->src_name + : pair->dest_name, + strerror(errno)); + return IO_WAIT_ERROR; + } + + if (ret == 0) + return IO_WAIT_TIMEOUT; + + if (pfd[0].revents != 0) + return IO_WAIT_MORE; + } +} +#endif + + +/// \brief Unlink a file +/// +/// This tries to verify that the file being unlinked really is the file that +/// we want to unlink by verifying device and inode numbers. There's still +/// a small unavoidable race, but this is much better than nothing (the file +/// could have been moved/replaced even hours earlier). +static void +io_unlink(const char *name, const struct stat *known_st) +{ +#if defined(TUKLIB_DOSLIKE) + // On DOS-like systems, st_ino is meaningless, so don't bother + // testing it. Just silence a compiler warning. + (void)known_st; +#else + struct stat new_st; + + // If --force was used, use stat() instead of lstat(). This way + // (de)compressing symlinks works correctly. However, it also means + // that xz cannot detect if a regular file foo is renamed to bar + // and then a symlink foo -> bar is created. Because of stat() + // instead of lstat(), xz will think that foo hasn't been replaced + // with another file. Thus, xz will remove foo even though it no + // longer is the same file that xz used when it started compressing. + // Probably it's not too bad though, so this doesn't need a more + // complex fix. + const int stat_ret = opt_force + ? stat(name, &new_st) : lstat(name, &new_st); + + if (stat_ret +# ifdef __VMS + // st_ino is an array, and we don't want to + // compare st_dev at all. + || memcmp(&new_st.st_ino, &known_st->st_ino, + sizeof(new_st.st_ino)) != 0 +# else + // Typical POSIX-like system + || new_st.st_dev != known_st->st_dev + || new_st.st_ino != known_st->st_ino +# endif + ) + // TRANSLATORS: When compression or decompression finishes, + // and xz is going to remove the source file, xz first checks + // if the source file still exists, and if it does, does its + // device and inode numbers match what xz saw when it opened + // the source file. If these checks fail, this message is + // shown, %s being the filename, and the file is not deleted. + // The check for device and inode numbers is there, because + // it is possible that the user has put a new file in place + // of the original file, and in that case it obviously + // shouldn't be removed. + message_warning(_("%s: File seems to have been moved, " + "not removing"), name); + else +#endif + // There's a race condition between lstat() and unlink() + // but at least we have tried to avoid removing wrong file. + if (unlink(name)) + message_warning(_("%s: Cannot remove: %s"), + name, strerror(errno)); + + return; +} + + +/// \brief Copies owner/group and permissions +/// +/// \todo ACL and EA support +/// +static void +io_copy_attrs(const file_pair *pair) +{ + // Skip chown and chmod on Windows. +#ifndef TUKLIB_DOSLIKE + // This function is more tricky than you may think at first. + // Blindly copying permissions may permit users to access the + // destination file who didn't have permission to access the + // source file. + + // Try changing the owner of the file. If we aren't root or the owner + // isn't already us, fchown() probably doesn't succeed. We warn + // about failing fchown() only if we are root. + if (fchown(pair->dest_fd, pair->src_st.st_uid, (gid_t)(-1)) + && warn_fchown) + message_warning(_("%s: Cannot set the file owner: %s"), + pair->dest_name, strerror(errno)); + + mode_t mode; + + // With BSD semantics the new dest file may have a group that + // does not belong to the user. If the src file has the same gid + // nothing has to be done. Nevertheless OpenBSD fchown(2) fails + // in this case which seems to be POSIX compliant. As there is + // nothing to do, skip the system call. + if (pair->dest_st.st_gid != pair->src_st.st_gid + && fchown(pair->dest_fd, (uid_t)(-1), + pair->src_st.st_gid)) { + message_warning(_("%s: Cannot set the file group: %s"), + pair->dest_name, strerror(errno)); + // We can still safely copy some additional permissions: + // `group' must be at least as strict as `other' and + // also vice versa. + // + // NOTE: After this, the owner of the source file may + // get additional permissions. This shouldn't be too bad, + // because the owner would have had permission to chmod + // the original file anyway. + mode = ((pair->src_st.st_mode & 0070) >> 3) + & (pair->src_st.st_mode & 0007); + mode = (pair->src_st.st_mode & 0700) | (mode << 3) | mode; + } else { + // Drop the setuid, setgid, and sticky bits. + mode = pair->src_st.st_mode & 0777; + } + + if (fchmod(pair->dest_fd, mode)) + message_warning(_("%s: Cannot set the file permissions: %s"), + pair->dest_name, strerror(errno)); +#endif + + // Copy the timestamps. We have several possible ways to do this, of + // which some are better in both security and precision. + // + // First, get the nanosecond part of the timestamps. As of writing, + // it's not standardized by POSIX, and there are several names for + // the same thing in struct stat. + long atime_nsec; + long mtime_nsec; + +# if defined(HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC) + // GNU and Solaris + atime_nsec = pair->src_st.st_atim.tv_nsec; + mtime_nsec = pair->src_st.st_mtim.tv_nsec; + +# elif defined(HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC) + // BSD + atime_nsec = pair->src_st.st_atimespec.tv_nsec; + mtime_nsec = pair->src_st.st_mtimespec.tv_nsec; + +# elif defined(HAVE_STRUCT_STAT_ST_ATIMENSEC) + // GNU and BSD without extensions + atime_nsec = pair->src_st.st_atimensec; + mtime_nsec = pair->src_st.st_mtimensec; + +# elif defined(HAVE_STRUCT_STAT_ST_UATIME) + // Tru64 + atime_nsec = pair->src_st.st_uatime * 1000; + mtime_nsec = pair->src_st.st_umtime * 1000; + +# elif defined(HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC) + // UnixWare + atime_nsec = pair->src_st.st_atim.st__tim.tv_nsec; + mtime_nsec = pair->src_st.st_mtim.st__tim.tv_nsec; + +# else + // Safe fallback + atime_nsec = 0; + mtime_nsec = 0; +# endif + + // Construct a structure to hold the timestamps and call appropriate + // function to set the timestamps. +#if defined(HAVE_FUTIMENS) + // Use nanosecond precision. + struct timespec tv[2]; + tv[0].tv_sec = pair->src_st.st_atime; + tv[0].tv_nsec = atime_nsec; + tv[1].tv_sec = pair->src_st.st_mtime; + tv[1].tv_nsec = mtime_nsec; + + (void)futimens(pair->dest_fd, tv); + +#elif defined(HAVE_FUTIMES) || defined(HAVE_FUTIMESAT) || defined(HAVE_UTIMES) + // Use microsecond precision. + struct timeval tv[2]; + tv[0].tv_sec = pair->src_st.st_atime; + tv[0].tv_usec = atime_nsec / 1000; + tv[1].tv_sec = pair->src_st.st_mtime; + tv[1].tv_usec = mtime_nsec / 1000; + +# if defined(HAVE_FUTIMES) + (void)futimes(pair->dest_fd, tv); +# elif defined(HAVE_FUTIMESAT) + (void)futimesat(pair->dest_fd, NULL, tv); +# else + // Argh, no function to use a file descriptor to set the timestamp. + (void)utimes(pair->dest_name, tv); +# endif + +#elif defined(HAVE__FUTIME) + // Use one-second precision with Windows-specific _futime(). + // We could use utime() too except that for some reason the + // timestamp will get reset at close(). With _futime() it works. + // This struct cannot be const as _futime() takes a non-const pointer. + struct _utimbuf buf = { + .actime = pair->src_st.st_atime, + .modtime = pair->src_st.st_mtime, + }; + + // Avoid warnings. + (void)atime_nsec; + (void)mtime_nsec; + + (void)_futime(pair->dest_fd, &buf); + +#elif defined(HAVE_UTIME) + // Use one-second precision. utime() doesn't support using file + // descriptor either. Some systems have broken utime() prototype + // so don't make this const. + struct utimbuf buf = { + .actime = pair->src_st.st_atime, + .modtime = pair->src_st.st_mtime, + }; + + // Avoid warnings. + (void)atime_nsec; + (void)mtime_nsec; + + (void)utime(pair->dest_name, &buf); +#endif + + return; +} + + +/// Opens the source file. Returns false on success, true on error. +static bool +io_open_src_real(file_pair *pair) +{ + // There's nothing to open when reading from stdin. + if (pair->src_name == stdin_filename) { + pair->src_fd = STDIN_FILENO; +#ifdef TUKLIB_DOSLIKE + setmode(STDIN_FILENO, O_BINARY); +#else + // Try to set stdin to non-blocking mode. It won't work + // e.g. on OpenBSD if stdout is e.g. /dev/null. In such + // case we proceed as if stdin were non-blocking anyway + // (in case of /dev/null it will be in practice). The + // same applies to stdout in io_open_dest_real(). + stdin_flags = fcntl(STDIN_FILENO, F_GETFL); + if (stdin_flags == -1) { + message_error(_("Error getting the file status flags " + "from standard input: %s"), + strerror(errno)); + return true; + } + + if ((stdin_flags & O_NONBLOCK) == 0 + && fcntl(STDIN_FILENO, F_SETFL, + stdin_flags | O_NONBLOCK) != -1) + restore_stdin_flags = true; +#endif +#ifdef HAVE_POSIX_FADVISE + // It will fail if stdin is a pipe and that's fine. + (void)posix_fadvise(STDIN_FILENO, 0, 0, + opt_mode == MODE_LIST + ? POSIX_FADV_RANDOM + : POSIX_FADV_SEQUENTIAL); +#endif + return false; + } + + // Symlinks are not followed unless writing to stdout or --force + // or --keep was used. + const bool follow_symlinks + = opt_stdout || opt_force || opt_keep_original; + + // We accept only regular files if we are writing the output + // to disk too. bzip2 allows overriding this with --force but + // gzip and xz don't. + const bool reg_files_only = !opt_stdout; + + // Flags for open() + int flags = O_RDONLY | O_BINARY | O_NOCTTY; + +#ifndef TUKLIB_DOSLIKE + // Use non-blocking I/O: + // - It prevents blocking when opening FIFOs and some other + // special files, which is good if we want to accept only + // regular files. + // - It can help avoiding some race conditions with signal handling. + flags |= O_NONBLOCK; +#endif + +#if defined(O_NOFOLLOW) + if (!follow_symlinks) + flags |= O_NOFOLLOW; +#elif !defined(TUKLIB_DOSLIKE) + // Some POSIX-like systems lack O_NOFOLLOW (it's not required + // by POSIX). Check for symlinks with a separate lstat() on + // these systems. + if (!follow_symlinks) { + struct stat st; + if (lstat(pair->src_name, &st)) { + message_error("%s: %s", pair->src_name, + strerror(errno)); + return true; + + } else if (S_ISLNK(st.st_mode)) { + message_warning(_("%s: Is a symbolic link, " + "skipping"), pair->src_name); + return true; + } + } +#else + // Avoid warnings. + (void)follow_symlinks; +#endif + + // Try to open the file. Signals have been blocked so EINTR shouldn't + // be possible. + pair->src_fd = open(pair->src_name, flags); + + if (pair->src_fd == -1) { + // Signals (that have a signal handler) have been blocked. + assert(errno != EINTR); + +#ifdef O_NOFOLLOW + // Give an understandable error message if the reason + // for failing was that the file was a symbolic link. + // + // Note that at least Linux, OpenBSD, Solaris, and Darwin + // use ELOOP to indicate that O_NOFOLLOW was the reason + // that open() failed. Because there may be + // directories in the pathname, ELOOP may occur also + // because of a symlink loop in the directory part. + // So ELOOP doesn't tell us what actually went wrong, + // and this stupidity went into POSIX-1.2008 too. + // + // FreeBSD associates EMLINK with O_NOFOLLOW and + // Tru64 uses ENOTSUP. We use these directly here + // and skip the lstat() call and the associated race. + // I want to hear if there are other kernels that + // fail with something else than ELOOP with O_NOFOLLOW. + bool was_symlink = false; + +# if defined(__FreeBSD__) || defined(__DragonFly__) + if (errno == EMLINK) + was_symlink = true; + +# elif defined(__digital__) && defined(__unix__) + if (errno == ENOTSUP) + was_symlink = true; + +# elif defined(__NetBSD__) + if (errno == EFTYPE) + was_symlink = true; + +# else + if (errno == ELOOP && !follow_symlinks) { + const int saved_errno = errno; + struct stat st; + if (lstat(pair->src_name, &st) == 0 + && S_ISLNK(st.st_mode)) + was_symlink = true; + + errno = saved_errno; + } +# endif + + if (was_symlink) + message_warning(_("%s: Is a symbolic link, " + "skipping"), pair->src_name); + else +#endif + // Something else than O_NOFOLLOW failing + // (assuming that the race conditions didn't + // confuse us). + message_error("%s: %s", pair->src_name, + strerror(errno)); + + return true; + } + + // Stat the source file. We need the result also when we copy + // the permissions, and when unlinking. + // + // NOTE: Use stat() instead of fstat() with DJGPP, because + // then we have a better chance to get st_ino value that can + // be used in io_open_dest_real() to prevent overwriting the + // source file. +#ifdef __DJGPP__ + if (stat(pair->src_name, &pair->src_st)) + goto error_msg; +#else + if (fstat(pair->src_fd, &pair->src_st)) + goto error_msg; +#endif + + if (S_ISDIR(pair->src_st.st_mode)) { + message_warning(_("%s: Is a directory, skipping"), + pair->src_name); + goto error; + } + + if (reg_files_only && !S_ISREG(pair->src_st.st_mode)) { + message_warning(_("%s: Not a regular file, skipping"), + pair->src_name); + goto error; + } + +#ifndef TUKLIB_DOSLIKE + if (reg_files_only && !opt_force && !opt_keep_original) { + if (pair->src_st.st_mode & (S_ISUID | S_ISGID)) { + // gzip rejects setuid and setgid files even + // when --force was used. bzip2 doesn't check + // for them, but calls fchown() after fchmod(), + // and many systems automatically drop setuid + // and setgid bits there. + // + // We accept setuid and setgid files if + // --force or --keep was used. We drop these bits + // explicitly in io_copy_attr(). + message_warning(_("%s: File has setuid or " + "setgid bit set, skipping"), + pair->src_name); + goto error; + } + + if (pair->src_st.st_mode & S_ISVTX) { + message_warning(_("%s: File has sticky bit " + "set, skipping"), + pair->src_name); + goto error; + } + + if (pair->src_st.st_nlink > 1) { + message_warning(_("%s: Input file has more " + "than one hard link, " + "skipping"), pair->src_name); + goto error; + } + } + + // If it is something else than a regular file, wait until + // there is input available. This way reading from FIFOs + // will work when open() is used with O_NONBLOCK. + if (!S_ISREG(pair->src_st.st_mode)) { + signals_unblock(); + const io_wait_ret ret = io_wait(pair, -1, true); + signals_block(); + + if (ret != IO_WAIT_MORE) + goto error; + } +#endif + +#ifdef HAVE_POSIX_FADVISE + // It will fail with some special files like FIFOs but that is fine. + (void)posix_fadvise(pair->src_fd, 0, 0, + opt_mode == MODE_LIST + ? POSIX_FADV_RANDOM + : POSIX_FADV_SEQUENTIAL); +#endif + + return false; + +error_msg: + message_error("%s: %s", pair->src_name, strerror(errno)); +error: + (void)close(pair->src_fd); + return true; +} + + +extern file_pair * +io_open_src(const char *src_name) +{ + if (src_name[0] == '\0') { + message_error(_("Empty filename, skipping")); + return NULL; + } + + // Since we have only one file open at a time, we can use + // a statically allocated structure. + static file_pair pair; + + // This implicitly also initializes src_st.st_size to zero + // which is expected to be <= 0 by default. fstat() isn't + // called when reading from standard input but src_st.st_size + // is still read. + pair = (file_pair){ + .src_name = src_name, + .dest_name = NULL, + .src_fd = -1, + .dest_fd = -1, + .src_eof = false, + .src_has_seen_input = false, + .flush_needed = false, + .dest_try_sparse = false, + .dest_pending_sparse = 0, + }; + + // Block the signals, for which we have a custom signal handler, so + // that we don't need to worry about EINTR. + signals_block(); + const bool error = io_open_src_real(&pair); + signals_unblock(); + +#ifdef ENABLE_SANDBOX + if (!error) + io_sandbox_enter(pair.src_fd); +#endif + + return error ? NULL : &pair; +} + + +/// \brief Closes source file of the file_pair structure +/// +/// \param pair File whose src_fd should be closed +/// \param success If true, the file will be removed from the disk if +/// closing succeeds and --keep hasn't been used. +static void +io_close_src(file_pair *pair, bool success) +{ +#ifndef TUKLIB_DOSLIKE + if (restore_stdin_flags) { + assert(pair->src_fd == STDIN_FILENO); + + restore_stdin_flags = false; + + if (fcntl(STDIN_FILENO, F_SETFL, stdin_flags) == -1) + message_error(_("Error restoring the status flags " + "to standard input: %s"), + strerror(errno)); + } +#endif + + if (pair->src_fd != STDIN_FILENO && pair->src_fd != -1) { + // Close the file before possibly unlinking it. On DOS-like + // systems this is always required since unlinking will fail + // if the file is open. On POSIX systems it usually works + // to unlink open files, but in some cases it doesn't and + // one gets EBUSY in errno. + // + // xz 5.2.2 and older unlinked the file before closing it + // (except on DOS-like systems). The old code didn't handle + // EBUSY and could fail e.g. on some CIFS shares. The + // advantage of unlinking before closing is negligible + // (avoids a race between close() and stat()/lstat() and + // unlink()), so let's keep this simple. + (void)close(pair->src_fd); + + if (success && !opt_keep_original) + io_unlink(pair->src_name, &pair->src_st); + } + + return; +} + + +static bool +io_open_dest_real(file_pair *pair) +{ + if (opt_stdout || pair->src_fd == STDIN_FILENO) { + // We don't modify or free() this. + pair->dest_name = (char *)"(stdout)"; + pair->dest_fd = STDOUT_FILENO; +#ifdef TUKLIB_DOSLIKE + setmode(STDOUT_FILENO, O_BINARY); +#else + // Try to set O_NONBLOCK if it isn't already set. + // If it fails, we assume that stdout is non-blocking + // in practice. See the comments in io_open_src_real() + // for similar situation with stdin. + // + // NOTE: O_APPEND may be unset later in this function + // and it relies on stdout_flags being set here. + stdout_flags = fcntl(STDOUT_FILENO, F_GETFL); + if (stdout_flags == -1) { + message_error(_("Error getting the file status flags " + "from standard output: %s"), + strerror(errno)); + return true; + } + + if ((stdout_flags & O_NONBLOCK) == 0 + && fcntl(STDOUT_FILENO, F_SETFL, + stdout_flags | O_NONBLOCK) != -1) + restore_stdout_flags = true; +#endif + } else { + pair->dest_name = suffix_get_dest_name(pair->src_name); + if (pair->dest_name == NULL) + return true; + +#ifdef __DJGPP__ + struct stat st; + if (stat(pair->dest_name, &st) == 0) { + // Check that it isn't a special file like "prn". + if (st.st_dev == -1) { + message_error("%s: Refusing to write to " + "a DOS special file", + pair->dest_name); + free(pair->dest_name); + return true; + } + + // Check that we aren't overwriting the source file. + if (st.st_dev == pair->src_st.st_dev + && st.st_ino == pair->src_st.st_ino) { + message_error("%s: Output file is the same " + "as the input file", + pair->dest_name); + free(pair->dest_name); + return true; + } + } +#endif + + // If --force was used, unlink the target file first. + if (opt_force && unlink(pair->dest_name) && errno != ENOENT) { + message_error(_("%s: Cannot remove: %s"), + pair->dest_name, strerror(errno)); + free(pair->dest_name); + return true; + } + + // Open the file. + int flags = O_WRONLY | O_BINARY | O_NOCTTY + | O_CREAT | O_EXCL; +#ifndef TUKLIB_DOSLIKE + flags |= O_NONBLOCK; +#endif + const mode_t mode = S_IRUSR | S_IWUSR; + pair->dest_fd = open(pair->dest_name, flags, mode); + + if (pair->dest_fd == -1) { + message_error("%s: %s", pair->dest_name, + strerror(errno)); + free(pair->dest_name); + return true; + } + } + +#ifndef TUKLIB_DOSLIKE + // dest_st isn't used on DOS-like systems except as a dummy + // argument to io_unlink(), so don't fstat() on such systems. + if (fstat(pair->dest_fd, &pair->dest_st)) { + // If fstat() really fails, we have a safe fallback here. +# if defined(__VMS) + pair->dest_st.st_ino[0] = 0; + pair->dest_st.st_ino[1] = 0; + pair->dest_st.st_ino[2] = 0; +# else + pair->dest_st.st_dev = 0; + pair->dest_st.st_ino = 0; +# endif + } else if (try_sparse && opt_mode == MODE_DECOMPRESS) { + // When writing to standard output, we need to be extra + // careful: + // - It may be connected to something else than + // a regular file. + // - We aren't necessarily writing to a new empty file + // or to the end of an existing file. + // - O_APPEND may be active. + // + // TODO: I'm keeping this disabled for DOS-like systems + // for now. FAT doesn't support sparse files, but NTFS + // does, so maybe this should be enabled on Windows after + // some testing. + if (pair->dest_fd == STDOUT_FILENO) { + if (!S_ISREG(pair->dest_st.st_mode)) + return false; + + if (stdout_flags & O_APPEND) { + // Creating a sparse file is not possible + // when O_APPEND is active (it's used by + // shell's >> redirection). As I understand + // it, it is safe to temporarily disable + // O_APPEND in xz, because if someone + // happened to write to the same file at the + // same time, results would be bad anyway + // (users shouldn't assume that xz uses any + // specific block size when writing data). + // + // The write position may be something else + // than the end of the file, so we must fix + // it to start writing at the end of the file + // to imitate O_APPEND. + if (lseek(STDOUT_FILENO, 0, SEEK_END) == -1) + return false; + + // Construct the new file status flags. + // If O_NONBLOCK was set earlier in this + // function, it must be kept here too. + int flags = stdout_flags & ~O_APPEND; + if (restore_stdout_flags) + flags |= O_NONBLOCK; + + // If this fcntl() fails, we continue but won't + // try to create sparse output. The original + // flags will still be restored if needed (to + // unset O_NONBLOCK) when the file is finished. + if (fcntl(STDOUT_FILENO, F_SETFL, flags) == -1) + return false; + + // Disabling O_APPEND succeeded. Mark + // that the flags should be restored + // in io_close_dest(). (This may have already + // been set when enabling O_NONBLOCK.) + restore_stdout_flags = true; + + } else if (lseek(STDOUT_FILENO, 0, SEEK_CUR) + != pair->dest_st.st_size) { + // Writing won't start exactly at the end + // of the file. We cannot use sparse output, + // because it would probably corrupt the file. + return false; + } + } + + pair->dest_try_sparse = true; + } +#endif + + return false; +} + + +extern bool +io_open_dest(file_pair *pair) +{ + signals_block(); + const bool ret = io_open_dest_real(pair); + signals_unblock(); + return ret; +} + + +/// \brief Closes destination file of the file_pair structure +/// +/// \param pair File whose dest_fd should be closed +/// \param success If false, the file will be removed from the disk. +/// +/// \return Zero if closing succeeds. On error, -1 is returned and +/// error message printed. +static bool +io_close_dest(file_pair *pair, bool success) +{ +#ifndef TUKLIB_DOSLIKE + // If io_open_dest() has disabled O_APPEND, restore it here. + if (restore_stdout_flags) { + assert(pair->dest_fd == STDOUT_FILENO); + + restore_stdout_flags = false; + + if (fcntl(STDOUT_FILENO, F_SETFL, stdout_flags) == -1) { + message_error(_("Error restoring the O_APPEND flag " + "to standard output: %s"), + strerror(errno)); + return true; + } + } +#endif + + if (pair->dest_fd == -1 || pair->dest_fd == STDOUT_FILENO) + return false; + + if (close(pair->dest_fd)) { + message_error(_("%s: Closing the file failed: %s"), + pair->dest_name, strerror(errno)); + + // Closing destination file failed, so we cannot trust its + // contents. Get rid of junk: + io_unlink(pair->dest_name, &pair->dest_st); + free(pair->dest_name); + return true; + } + + // If the operation using this file wasn't successful, we git rid + // of the junk file. + if (!success) + io_unlink(pair->dest_name, &pair->dest_st); + + free(pair->dest_name); + + return false; +} + + +extern void +io_close(file_pair *pair, bool success) +{ + // Take care of sparseness at the end of the output file. + if (success && pair->dest_try_sparse + && pair->dest_pending_sparse > 0) { + // Seek forward one byte less than the size of the pending + // hole, then write one zero-byte. This way the file grows + // to its correct size. An alternative would be to use + // ftruncate() but that isn't portable enough (e.g. it + // doesn't work with FAT on Linux; FAT isn't that important + // since it doesn't support sparse files anyway, but we don't + // want to create corrupt files on it). + if (lseek(pair->dest_fd, pair->dest_pending_sparse - 1, + SEEK_CUR) == -1) { + message_error(_("%s: Seeking failed when trying " + "to create a sparse file: %s"), + pair->dest_name, strerror(errno)); + success = false; + } else { + const uint8_t zero[1] = { '\0' }; + if (io_write_buf(pair, zero, 1)) + success = false; + } + } + + signals_block(); + + // Copy the file attributes. We need to skip this if destination + // file isn't open or it is standard output. + if (success && pair->dest_fd != -1 && pair->dest_fd != STDOUT_FILENO) + io_copy_attrs(pair); + + // Close the destination first. If it fails, we must not remove + // the source file! + if (io_close_dest(pair, success)) + success = false; + + // Close the source file, and unlink it if the operation using this + // file pair was successful and we haven't requested to keep the + // source file. + io_close_src(pair, success); + + signals_unblock(); + + return; +} + + +extern void +io_fix_src_pos(file_pair *pair, size_t rewind_size) +{ + assert(rewind_size <= IO_BUFFER_SIZE); + + if (rewind_size > 0) { + // This doesn't need to work on unseekable file descriptors, + // so just ignore possible errors. + (void)lseek(pair->src_fd, -(off_t)(rewind_size), SEEK_CUR); + } + + return; +} + + +extern size_t +io_read(file_pair *pair, io_buf *buf, size_t size) +{ + // We use small buffers here. + assert(size < SSIZE_MAX); + + size_t pos = 0; + + while (pos < size) { + const ssize_t amount = read( + pair->src_fd, buf->u8 + pos, size - pos); + + if (amount == 0) { + pair->src_eof = true; + break; + } + + if (amount == -1) { + if (errno == EINTR) { + if (user_abort) + return SIZE_MAX; + + continue; + } + +#ifndef TUKLIB_DOSLIKE + if (IS_EAGAIN_OR_EWOULDBLOCK(errno)) { + // Disable the flush-timeout if no input has + // been seen since the previous flush and thus + // there would be nothing to flush after the + // timeout expires (avoids busy waiting). + const int timeout = pair->src_has_seen_input + ? mytime_get_flush_timeout() + : -1; + + switch (io_wait(pair, timeout, true)) { + case IO_WAIT_MORE: + continue; + + case IO_WAIT_ERROR: + return SIZE_MAX; + + case IO_WAIT_TIMEOUT: + pair->flush_needed = true; + return pos; + + default: + message_bug(); + } + } +#endif + + message_error(_("%s: Read error: %s"), + pair->src_name, strerror(errno)); + + return SIZE_MAX; + } + + pos += (size_t)(amount); + + if (!pair->src_has_seen_input) { + pair->src_has_seen_input = true; + mytime_set_flush_time(); + } + } + + return pos; +} + + +extern bool +io_seek_src(file_pair *pair, uint64_t pos) +{ + // Caller must not attempt to seek past the end of the input file + // (seeking to 100 in a 100-byte file is seeking to the end of + // the file, not past the end of the file, and thus that is allowed). + // + // This also validates that pos can be safely cast to off_t. + if (pos > (uint64_t)(pair->src_st.st_size)) + message_bug(); + + if (lseek(pair->src_fd, (off_t)(pos), SEEK_SET) == -1) { + message_error(_("%s: Error seeking the file: %s"), + pair->src_name, strerror(errno)); + return true; + } + + pair->src_eof = false; + + return false; +} + + +extern bool +io_pread(file_pair *pair, io_buf *buf, size_t size, uint64_t pos) +{ + // Using lseek() and read() is more portable than pread() and + // for us it is as good as real pread(). + if (io_seek_src(pair, pos)) + return true; + + const size_t amount = io_read(pair, buf, size); + if (amount == SIZE_MAX) + return true; + + if (amount != size) { + message_error(_("%s: Unexpected end of file"), + pair->src_name); + return true; + } + + return false; +} + + +static bool +is_sparse(const io_buf *buf) +{ + assert(IO_BUFFER_SIZE % sizeof(uint64_t) == 0); + + for (size_t i = 0; i < ARRAY_SIZE(buf->u64); ++i) + if (buf->u64[i] != 0) + return false; + + return true; +} + + +static bool +io_write_buf(file_pair *pair, const uint8_t *buf, size_t size) +{ + assert(size < SSIZE_MAX); + + while (size > 0) { + const ssize_t amount = write(pair->dest_fd, buf, size); + if (amount == -1) { + if (errno == EINTR) { + if (user_abort) + return true; + + continue; + } + +#ifndef TUKLIB_DOSLIKE + if (IS_EAGAIN_OR_EWOULDBLOCK(errno)) { + if (io_wait(pair, -1, false) == IO_WAIT_MORE) + continue; + + return true; + } +#endif + + // Handle broken pipe specially. gzip and bzip2 + // don't print anything on SIGPIPE. In addition, + // gzip --quiet uses exit status 2 (warning) on + // broken pipe instead of whatever raise(SIGPIPE) + // would make it return. It is there to hide "Broken + // pipe" message on some old shells (probably old + // GNU bash). + // + // We don't do anything special with --quiet, which + // is what bzip2 does too. If we get SIGPIPE, we + // will handle it like other signals by setting + // user_abort, and get EPIPE here. + if (errno != EPIPE) + message_error(_("%s: Write error: %s"), + pair->dest_name, strerror(errno)); + + return true; + } + + buf += (size_t)(amount); + size -= (size_t)(amount); + } + + return false; +} + + +extern bool +io_write(file_pair *pair, const io_buf *buf, size_t size) +{ + assert(size <= IO_BUFFER_SIZE); + + if (pair->dest_try_sparse) { + // Check if the block is sparse (contains only zeros). If it + // sparse, we just store the amount and return. We will take + // care of actually skipping over the hole when we hit the + // next data block or close the file. + // + // Since io_close() requires that dest_pending_sparse > 0 + // if the file ends with sparse block, we must also return + // if size == 0 to avoid doing the lseek(). + if (size == IO_BUFFER_SIZE) { + // Even if the block was sparse, treat it as non-sparse + // if the pending sparse amount is large compared to + // the size of off_t. In practice this only matters + // on 32-bit systems where off_t isn't always 64 bits. + const off_t pending_max + = (off_t)(1) << (sizeof(off_t) * CHAR_BIT - 2); + if (is_sparse(buf) && pair->dest_pending_sparse + < pending_max) { + pair->dest_pending_sparse += (off_t)(size); + return false; + } + } else if (size == 0) { + return false; + } + + // This is not a sparse block. If we have a pending hole, + // skip it now. + if (pair->dest_pending_sparse > 0) { + if (lseek(pair->dest_fd, pair->dest_pending_sparse, + SEEK_CUR) == -1) { + message_error(_("%s: Seeking failed when " + "trying to create a sparse " + "file: %s"), pair->dest_name, + strerror(errno)); + return true; + } + + pair->dest_pending_sparse = 0; + } + } + + return io_write_buf(pair, buf->u8, size); +} diff --git a/src/xz/file_io.h b/src/xz/file_io.h new file mode 100644 index 0000000..8a9e336 --- /dev/null +++ b/src/xz/file_io.h @@ -0,0 +1,179 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file file_io.h +/// \brief I/O types and functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +// Some systems have suboptimal BUFSIZ. Use a bit bigger value on them. +// We also need that IO_BUFFER_SIZE is a multiple of 8 (sizeof(uint64_t)) +#if BUFSIZ <= 1024 +# define IO_BUFFER_SIZE 8192 +#else +# define IO_BUFFER_SIZE (BUFSIZ & ~7U) +#endif + + +/// is_sparse() accesses the buffer as uint64_t for maximum speed. +/// The u32 and u64 members must only be access through this union +/// to avoid strict aliasing violations. Taking a pointer of u8 +/// should be fine as long as uint8_t maps to unsigned char which +/// can alias anything. +typedef union { + uint8_t u8[IO_BUFFER_SIZE]; + uint32_t u32[IO_BUFFER_SIZE / sizeof(uint32_t)]; + uint64_t u64[IO_BUFFER_SIZE / sizeof(uint64_t)]; +} io_buf; + + +typedef struct { + /// Name of the source filename (as given on the command line) or + /// pointer to static "(stdin)" when reading from standard input. + const char *src_name; + + /// Destination filename converted from src_name or pointer to static + /// "(stdout)" when writing to standard output. + char *dest_name; + + /// File descriptor of the source file + int src_fd; + + /// File descriptor of the target file + int dest_fd; + + /// True once end of the source file has been detected. + bool src_eof; + + /// For --flush-timeout: True if at least one byte has been read + /// since the previous flush or the start of the file. + bool src_has_seen_input; + + /// For --flush-timeout: True when flushing is needed. + bool flush_needed; + + /// If true, we look for long chunks of zeros and try to create + /// a sparse file. + bool dest_try_sparse; + + /// This is used only if dest_try_sparse is true. This holds the + /// number of zero bytes we haven't written out, because we plan + /// to make that byte range a sparse chunk. + off_t dest_pending_sparse; + + /// Stat of the source file. + struct stat src_st; + + /// Stat of the destination file. + struct stat dest_st; + +} file_pair; + + +/// \brief Initialize the I/O module +extern void io_init(void); + + +#ifndef TUKLIB_DOSLIKE +/// \brief Write a byte to user_abort_pipe[1] +/// +/// This is called from a signal handler. +extern void io_write_to_user_abort_pipe(void); +#endif + + +/// \brief Disable creation of sparse files when decompressing +extern void io_no_sparse(void); + + +#ifdef ENABLE_SANDBOX +/// \brief main() calls this if conditions for sandboxing have been met. +extern void io_allow_sandbox(void); +#endif + + +/// \brief Open the source file +extern file_pair *io_open_src(const char *src_name); + + +/// \brief Open the destination file +extern bool io_open_dest(file_pair *pair); + + +/// \brief Closes the file descriptors and frees possible allocated memory +/// +/// The success argument determines if source or destination file gets +/// unlinked: +/// - false: The destination file is unlinked. +/// - true: The source file is unlinked unless writing to stdout or --keep +/// was used. +extern void io_close(file_pair *pair, bool success); + + +/// \brief Reads from the source file to a buffer +/// +/// \param pair File pair having the source file open for reading +/// \param buf Destination buffer to hold the read data +/// \param size Size of the buffer; assumed be smaller than SSIZE_MAX +/// +/// \return On success, number of bytes read is returned. On end of +/// file zero is returned and pair->src_eof set to true. +/// On error, SIZE_MAX is returned and error message printed. +extern size_t io_read(file_pair *pair, io_buf *buf, size_t size); + + +/// \brief Fix the position in src_fd +/// +/// This is used when --single-thream has been specified and decompression +/// is successful. If the input file descriptor supports seeking, this +/// function fixes the input position to point to the next byte after the +/// decompressed stream. +/// +/// \param pair File pair having the source file open for reading +/// \param rewind_size How many bytes of extra have been read i.e. +/// how much to seek backwards. +extern void io_fix_src_pos(file_pair *pair, size_t rewind_size); + + +/// \brief Seek to the given absolute position in the source file +/// +/// This calls lseek() and also clears pair->src_eof. +/// +/// \param pair Seekable source file +/// \param pos Offset relative to the beginning of the file, +/// from which the data should be read. +/// +/// \return On success, false is returned. On error, error message +/// is printed and true is returned. +extern bool io_seek_src(file_pair *pair, uint64_t pos); + + +/// \brief Read from source file from given offset to a buffer +/// +/// This is remotely similar to standard pread(). This uses lseek() though, +/// so the read offset is changed on each call. +/// +/// \param pair Seekable source file +/// \param buf Destination buffer +/// \param size Amount of data to read +/// \param pos Offset relative to the beginning of the file, +/// from which the data should be read. +/// +/// \return On success, false is returned. On error, error message +/// is printed and true is returned. +extern bool io_pread(file_pair *pair, io_buf *buf, size_t size, uint64_t pos); + + +/// \brief Writes a buffer to the destination file +/// +/// \param pair File pair having the destination file open for writing +/// \param buf Buffer containing the data to be written +/// \param size Size of the buffer; assumed be smaller than SSIZE_MAX +/// +/// \return On success, zero is returned. On error, -1 is returned +/// and error message printed. +extern bool io_write(file_pair *pair, const io_buf *buf, size_t size); diff --git a/src/xz/hardware.c b/src/xz/hardware.c new file mode 100644 index 0000000..ccdc3b9 --- /dev/null +++ b/src/xz/hardware.c @@ -0,0 +1,338 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file hardware.c +/// \brief Detection of available hardware resources +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + + +/// Maximum number of worker threads. This can be set with +/// the --threads=NUM command line option. +static uint32_t threads_max = 1; + +/// True when the number of threads is automatically determined based +/// on the available hardware threads. +static bool threads_are_automatic = false; + +/// If true, then try to use multi-threaded mode (if memlimit allows) +/// even if only one thread was requested explicitly (-T+1). +static bool use_mt_mode_with_one_thread = false; + +/// Memory usage limit for compression +static uint64_t memlimit_compress = 0; + +/// Memory usage limit for decompression +static uint64_t memlimit_decompress = 0; + +/// Default memory usage for multithreaded modes: +/// +/// - Default value for --memlimit-compress when automatic number of threads +/// is used. However, if the limit wouldn't allow even one thread then +/// the limit is ignored in coder.c and one thread will be used anyway. +/// This mess is a compromise: we wish to prevent -T0 from using too +/// many threads but we also don't want xz to give an error due to +/// a memlimit that the user didn't explicitly set. +/// +/// - Default value for --memlimit-mt-decompress +/// +/// This value is caluclated in hardware_init() and cannot be changed later. +static uint64_t memlimit_mt_default; + +/// Memory usage limit for multithreaded decompression. This is a soft limit: +/// if reducing the number of threads to one isn't enough to keep memory +/// usage below this limit, then one thread is used and this limit is ignored. +/// memlimit_decompress is still obeyed. +/// +/// This can be set with --memlimit-mt-decompress. The default value for +/// this is memlimit_mt_default. +static uint64_t memlimit_mtdec; + +/// Total amount of physical RAM +static uint64_t total_ram; + + +extern void +hardware_threads_set(uint32_t n) +{ + // Reset these to false first and set them to true when appropriate. + threads_are_automatic = false; + use_mt_mode_with_one_thread = false; + + if (n == 0) { + // Automatic number of threads was requested. + // If there is only one hardware thread, multi-threaded + // mode will still be used if memory limit allows. + threads_are_automatic = true; + use_mt_mode_with_one_thread = true; + + // If threading support was enabled at build time, + // use the number of available CPU cores. Otherwise + // use one thread since disabling threading support + // omits lzma_cputhreads() from liblzma. +#ifdef MYTHREAD_ENABLED + threads_max = lzma_cputhreads(); + if (threads_max == 0) + threads_max = 1; +#else + threads_max = 1; +#endif + } else if (n == UINT32_MAX) { + use_mt_mode_with_one_thread = true; + threads_max = 1; + } else { + threads_max = n; + } + + return; +} + + +extern uint32_t +hardware_threads_get(void) +{ + return threads_max; +} + + +extern bool +hardware_threads_is_mt(void) +{ +#ifdef MYTHREAD_ENABLED + return threads_max > 1 || use_mt_mode_with_one_thread; +#else + return false; +#endif +} + + +extern void +hardware_memlimit_set(uint64_t new_memlimit, + bool set_compress, bool set_decompress, bool set_mtdec, + bool is_percentage) +{ + if (is_percentage) { + assert(new_memlimit > 0); + assert(new_memlimit <= 100); + new_memlimit = (uint32_t)new_memlimit * total_ram / 100; + } + + if (set_compress) { + memlimit_compress = new_memlimit; + +#if SIZE_MAX == UINT32_MAX + // FIXME? + // + // When running a 32-bit xz on a system with a lot of RAM and + // using a percentage-based memory limit, the result can be + // bigger than the 32-bit address space. Limiting the limit + // below SIZE_MAX for compression (not decompression) makes + // xz lower the compression settings (or number of threads) + // to a level that *might* work. In practice it has worked + // when using a 64-bit kernel that gives full 4 GiB address + // space to 32-bit programs. In other situations this might + // still be too high, like 32-bit kernels that may give much + // less than 4 GiB to a single application. + // + // So this is an ugly hack but I will keep it here while + // it does more good than bad. + // + // Use a value less than SIZE_MAX so that there's some room + // for the xz program and so on. Don't use 4000 MiB because + // it could look like someone mixed up base-2 and base-10. +#ifdef __mips__ + // For MIPS32, due to architectural pecularities, + // the limit is even lower. + const uint64_t limit_max = UINT64_C(2000) << 20; +#else + const uint64_t limit_max = UINT64_C(4020) << 20; +#endif + + // UINT64_MAX is a special case for the string "max" so + // that has to be handled specially. + if (memlimit_compress != UINT64_MAX + && memlimit_compress > limit_max) + memlimit_compress = limit_max; +#endif + } + + if (set_decompress) + memlimit_decompress = new_memlimit; + + if (set_mtdec) + memlimit_mtdec = new_memlimit; + + return; +} + + +extern uint64_t +hardware_memlimit_get(enum operation_mode mode) +{ + // 0 is a special value that indicates the default. + // It disables the limit in single-threaded mode. + // + // NOTE: For multithreaded decompression, this is the hard limit + // (memlimit_stop). hardware_memlimit_mtdec_get() gives the + // soft limit (memlimit_threaded). + const uint64_t memlimit = mode == MODE_COMPRESS + ? memlimit_compress : memlimit_decompress; + return memlimit != 0 ? memlimit : UINT64_MAX; +} + + +extern uint64_t +hardware_memlimit_mtenc_get(void) +{ + return hardware_memlimit_mtenc_is_default() + ? memlimit_mt_default + : hardware_memlimit_get(MODE_COMPRESS); +} + + +extern bool +hardware_memlimit_mtenc_is_default(void) +{ + return memlimit_compress == 0 && threads_are_automatic; +} + + +extern uint64_t +hardware_memlimit_mtdec_get(void) +{ + uint64_t m = memlimit_mtdec != 0 + ? memlimit_mtdec + : memlimit_mt_default; + + // Cap the value to memlimit_decompress if it has been specified. + // This is nice for --info-memory. It wouldn't be needed for liblzma + // since it does this anyway. + if (memlimit_decompress != 0 && m > memlimit_decompress) + m = memlimit_decompress; + + return m; +} + + +/// Helper for hardware_memlimit_show() to print one human-readable info line. +static void +memlimit_show(const char *str, size_t str_columns, uint64_t value) +{ + // Calculate the field width so that str will be padded to take + // str_columns on the terminal. + // + // NOTE: If the string is invalid, this will be -1. Using -1 as + // the field width is fine here so it's not handled specially. + const int fw = tuklib_mbstr_fw(str, (int)(str_columns)); + + // The memory usage limit is considered to be disabled if value + // is 0 or UINT64_MAX. This might get a bit more complex once there + // is threading support. See the comment in hardware_memlimit_get(). + if (value == 0 || value == UINT64_MAX) + printf(" %-*s %s\n", fw, str, _("Disabled")); + else + printf(" %-*s %s MiB (%s B)\n", fw, str, + uint64_to_str(round_up_to_mib(value), 0), + uint64_to_str(value, 1)); + + return; +} + + +extern void +hardware_memlimit_show(void) +{ + uint32_t cputhreads = 1; +#ifdef MYTHREAD_ENABLED + cputhreads = lzma_cputhreads(); + if (cputhreads == 0) + cputhreads = 1; +#endif + + if (opt_robot) { + printf("%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 + "\t%" PRIu64 "\t%" PRIu32 "\n", + total_ram, + memlimit_compress, + memlimit_decompress, + hardware_memlimit_mtdec_get(), + memlimit_mt_default, + cputhreads); + } else { + const char *msgs[] = { + _("Amount of physical memory (RAM):"), + _("Number of processor threads:"), + _("Compression:"), + _("Decompression:"), + _("Multi-threaded decompression:"), + _("Default for -T0:"), + }; + + size_t width_max = 1; + for (unsigned i = 0; i < ARRAY_SIZE(msgs); ++i) { + size_t w = tuklib_mbstr_width(msgs[i], NULL); + + // When debugging, catch invalid strings with + // an assertion. Otherwise fallback to 1 so + // that the columns just won't be aligned. + assert(w != (size_t)-1); + if (w == (size_t)-1) + w = 1; + + if (width_max < w) + width_max = w; + } + + puts(_("Hardware information:")); + memlimit_show(msgs[0], width_max, total_ram); + printf(" %-*s %" PRIu32 "\n", + tuklib_mbstr_fw(msgs[1], (int)(width_max)), + msgs[1], cputhreads); + + putchar('\n'); + puts(_("Memory usage limits:")); + memlimit_show(msgs[2], width_max, memlimit_compress); + memlimit_show(msgs[3], width_max, memlimit_decompress); + memlimit_show(msgs[4], width_max, + hardware_memlimit_mtdec_get()); + memlimit_show(msgs[5], width_max, memlimit_mt_default); + } + + tuklib_exit(E_SUCCESS, E_ERROR, message_verbosity_get() != V_SILENT); +} + + +extern void +hardware_init(void) +{ + // Get the amount of RAM. If we cannot determine it, + // use the assumption defined by the configure script. + total_ram = lzma_physmem(); + if (total_ram == 0) + total_ram = (uint64_t)(ASSUME_RAM) * 1024 * 1024; + + // FIXME? There may be better methods to determine the default value. + // One Linux-specific suggestion is to use MemAvailable from + // /proc/meminfo as the starting point. + memlimit_mt_default = total_ram / 4; + +#if SIZE_MAX == UINT32_MAX + // A too high value may cause 32-bit xz to run out of address space. + // Use a conservative maximum value here. A few typical address space + // sizes with Linux: + // - x86-64 with 32-bit xz: 4 GiB + // - x86: 3 GiB + // - MIPS32: 2 GiB + const size_t mem_ceiling = 1400U << 20; + if (memlimit_mt_default > mem_ceiling) + memlimit_mt_default = mem_ceiling; +#endif + + return; +} diff --git a/src/xz/hardware.h b/src/xz/hardware.h new file mode 100644 index 0000000..2bb3d7b --- /dev/null +++ b/src/xz/hardware.h @@ -0,0 +1,74 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file hardware.h +/// \brief Detection of available hardware resources +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// Initialize some hardware-specific variables, which are needed by other +/// hardware_* functions. +extern void hardware_init(void); + + +/// Set the maximum number of worker threads. +/// A special value of UINT32_MAX sets one thread in multi-threaded mode. +extern void hardware_threads_set(uint32_t threadlimit); + +/// Get the maximum number of worker threads. +extern uint32_t hardware_threads_get(void); + +/// Returns true if multithreaded mode should be used for .xz compression. +/// This can be true even if the number of threads is one. +extern bool hardware_threads_is_mt(void); + + +/// Set the memory usage limit. There are separate limits for compression, +/// decompression (also includes --list), and multithreaded decompression. +/// Any combination of these can be set with a single call to this function. +/// Zero indicates resetting the limit back to the defaults. +/// The limit can also be set as a percentage of installed RAM; the +/// percentage must be in the range [1, 100]. +extern void hardware_memlimit_set(uint64_t new_memlimit, + bool set_compress, bool set_decompress, bool set_mtdec, + bool is_percentage); + +/// Get the current memory usage limit for compression or decompression. +/// This is a hard limit that will not be exceeded. This is obeyed in +/// both single-threaded and multithreaded modes. +extern uint64_t hardware_memlimit_get(enum operation_mode mode); + +/// This returns a system-specific default value if all of the following +/// conditions are true: +/// +/// - An automatic number of threads was requested (--threads=0). +/// +/// - --memlimit-compress wasn't used or it was reset to the default +/// value by setting it to 0. +/// +/// Otherwise this is identical to hardware_memlimit_get(MODE_COMPRESS). +/// +/// The idea is to keep automatic thread count reasonable so that too +/// high memory usage is avoided and, with 32-bit xz, running out of +/// address space is avoided. +extern uint64_t hardware_memlimit_mtenc_get(void); + +/// Returns true if the value returned by hardware_memlimit_mtenc_get() is +/// a system-specific default value. coder.c uses this to ignore the default +/// memlimit in case it's too small even for a single thread in multithreaded +/// mode. This way the default limit will never make xz fail or affect the +/// compressed output; it will only make xz reduce the number of threads. +extern bool hardware_memlimit_mtenc_is_default(void); + +/// Get the current memory usage limit for multithreaded decompression. +/// This is only used to reduce the number of threads. This limit can be +/// exceeded if the number of threads are reduce to one. Then the value +/// from hardware_memlimit_get() will be honored like in single-threaded mode. +extern uint64_t hardware_memlimit_mtdec_get(void); + +/// Display the amount of RAM and memory usage limits and exit. +extern void hardware_memlimit_show(void) lzma_attribute((__noreturn__)); diff --git a/src/xz/list.c b/src/xz/list.c new file mode 100644 index 0000000..ee61aeb --- /dev/null +++ b/src/xz/list.c @@ -0,0 +1,1317 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file list.c +/// \brief Listing information about .xz files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" +#include "tuklib_integer.h" + + +/// Information about a .xz file +typedef struct { + /// Combined Index of all Streams in the file + lzma_index *idx; + + /// Total amount of Stream Padding + uint64_t stream_padding; + + /// Highest memory usage so far + uint64_t memusage_max; + + /// True if all Blocks so far have Compressed Size and + /// Uncompressed Size fields + bool all_have_sizes; + + /// Oldest XZ Utils version that will decompress the file + uint32_t min_version; + +} xz_file_info; + +#define XZ_FILE_INFO_INIT { NULL, 0, 0, true, 50000002 } + + +/// Information about a .xz Block +typedef struct { + /// Size of the Block Header + uint32_t header_size; + + /// A few of the Block Flags as a string + char flags[3]; + + /// Size of the Compressed Data field in the Block + lzma_vli compressed_size; + + /// Decoder memory usage for this Block + uint64_t memusage; + + /// The filter chain of this Block in human-readable form + char *filter_chain; + +} block_header_info; + +#define BLOCK_HEADER_INFO_INIT { .filter_chain = NULL } +#define block_header_info_end(bhi) free((bhi)->filter_chain) + + +/// Strings ending in a colon. These are used for lines like +/// " Foo: 123 MiB". These are grouped because translated strings +/// may have different maximum string length, and we want to pad all +/// strings so that the values are aligned nicely. +static const char *colon_strs[] = { + N_("Streams:"), + N_("Blocks:"), + N_("Compressed size:"), + N_("Uncompressed size:"), + N_("Ratio:"), + N_("Check:"), + N_("Stream Padding:"), + N_("Memory needed:"), + N_("Sizes in headers:"), + // This won't be aligned because it's so long: + //N_("Minimum XZ Utils version:"), + N_("Number of files:"), +}; + +/// Enum matching the above strings. +enum { + COLON_STR_STREAMS, + COLON_STR_BLOCKS, + COLON_STR_COMPRESSED_SIZE, + COLON_STR_UNCOMPRESSED_SIZE, + COLON_STR_RATIO, + COLON_STR_CHECK, + COLON_STR_STREAM_PADDING, + COLON_STR_MEMORY_NEEDED, + COLON_STR_SIZES_IN_HEADERS, + //COLON_STR_MINIMUM_XZ_VERSION, + COLON_STR_NUMBER_OF_FILES, +}; + +/// Field widths to use with printf to pad the strings to use the same number +/// of columns on a terminal. +static int colon_strs_fw[ARRAY_SIZE(colon_strs)]; + +/// Convenience macro to get the translated string and its field width +/// using a COLON_STR_foo enum. +#define COLON_STR(num) colon_strs_fw[num], _(colon_strs[num]) + + +/// Column headings +static struct { + /// Table column heading string + const char *str; + + /// Number of terminal-columns to use for this table-column. + /// If a translated string is longer than the initial value, + /// this value will be increased in init_headings(). + int columns; + + /// Field width to use for printf() to pad "str" to use "columns" + /// number of columns on a terminal. This is calculated in + /// init_headings(). + int fw; + +} headings[] = { + { N_("Stream"), 6, 0 }, + { N_("Block"), 9, 0 }, + { N_("Blocks"), 9, 0 }, + { N_("CompOffset"), 15, 0 }, + { N_("UncompOffset"), 15, 0 }, + { N_("CompSize"), 15, 0 }, + { N_("UncompSize"), 15, 0 }, + { N_("TotalSize"), 15, 0 }, + { N_("Ratio"), 5, 0 }, + { N_("Check"), 10, 0 }, + { N_("CheckVal"), 1, 0 }, + { N_("Padding"), 7, 0 }, + { N_("Header"), 5, 0 }, + { N_("Flags"), 2, 0 }, + { N_("MemUsage"), 7 + 4, 0 }, // +4 is for " MiB" + { N_("Filters"), 1, 0 }, +}; + +/// Enum matching the above strings. +enum { + HEADING_STREAM, + HEADING_BLOCK, + HEADING_BLOCKS, + HEADING_COMPOFFSET, + HEADING_UNCOMPOFFSET, + HEADING_COMPSIZE, + HEADING_UNCOMPSIZE, + HEADING_TOTALSIZE, + HEADING_RATIO, + HEADING_CHECK, + HEADING_CHECKVAL, + HEADING_PADDING, + HEADING_HEADERSIZE, + HEADING_HEADERFLAGS, + HEADING_MEMUSAGE, + HEADING_FILTERS, +}; + +#define HEADING_STR(num) headings[num].fw, _(headings[num].str) + + +/// Check ID to string mapping +static const char check_names[LZMA_CHECK_ID_MAX + 1][12] = { + // TRANSLATORS: Indicates that there is no integrity check. + // This string is used in tables. In older xz version this + // string was limited to ten columns in a fixed-width font, but + // nowadays there is no strict length restriction anymore. + N_("None"), + "CRC32", + // TRANSLATORS: Indicates that integrity check name is not known, + // but the Check ID is known (here 2). In older xz version these + // strings were limited to ten columns in a fixed-width font, but + // nowadays there is no strict length restriction anymore. + N_("Unknown-2"), + N_("Unknown-3"), + "CRC64", + N_("Unknown-5"), + N_("Unknown-6"), + N_("Unknown-7"), + N_("Unknown-8"), + N_("Unknown-9"), + "SHA-256", + N_("Unknown-11"), + N_("Unknown-12"), + N_("Unknown-13"), + N_("Unknown-14"), + N_("Unknown-15"), +}; + +/// Buffer size for get_check_names(). This may be a bit ridiculous, +/// but at least it's enough if some language needs many multibyte chars. +#define CHECKS_STR_SIZE 1024 + + +/// Value of the Check field as hexadecimal string. +/// This is set by parse_check_value(). +static char check_value[2 * LZMA_CHECK_SIZE_MAX + 1]; + + +/// Totals that are displayed if there was more than one file. +/// The "files" counter is also used in print_info_adv() to show +/// the file number. +static struct { + uint64_t files; + uint64_t streams; + uint64_t blocks; + uint64_t compressed_size; + uint64_t uncompressed_size; + uint64_t stream_padding; + uint64_t memusage_max; + uint32_t checks; + uint32_t min_version; + bool all_have_sizes; +} totals = { 0, 0, 0, 0, 0, 0, 0, 0, 50000002, true }; + + +/// Initialize colon_strs_fw[]. +static void +init_colon_strs(void) +{ + // Lengths of translated strings as bytes. + size_t lens[ARRAY_SIZE(colon_strs)]; + + // Lengths of translated strings as columns. + size_t widths[ARRAY_SIZE(colon_strs)]; + + // Maximum number of columns needed by a translated string. + size_t width_max = 0; + + for (unsigned i = 0; i < ARRAY_SIZE(colon_strs); ++i) { + widths[i] = tuklib_mbstr_width(_(colon_strs[i]), &lens[i]); + + // If debugging is enabled, catch invalid strings with + // an assertion. However, when not debugging, use the + // byte count as the fallback width. This shouldn't + // ever happen unless there is a bad string in the + // translations, but in such case I guess it's better + // to try to print something useful instead of failing + // completely. + assert(widths[i] != (size_t)-1); + if (widths[i] == (size_t)-1) + widths[i] = lens[i]; + + if (widths[i] > width_max) + width_max = widths[i]; + } + + // Calculate the field width for printf("%*s") so that the strings + // will use width_max columns on a terminal. + for (unsigned i = 0; i < ARRAY_SIZE(colon_strs); ++i) + colon_strs_fw[i] = (int)(lens[i] + width_max - widths[i]); + + return; +} + + +/// Initialize headings[]. +static void +init_headings(void) +{ + // Before going through the heading strings themselves, treat + // the Check heading specially: Look at the widths of the various + // check names and increase the width of the Check column if needed. + // The width of the heading name "Check" will then be handled normally + // with other heading names in the second loop in this function. + for (unsigned i = 0; i < ARRAY_SIZE(check_names); ++i) { + size_t len; + size_t w = tuklib_mbstr_width(_(check_names[i]), &len); + + // Error handling like in init_colon_strs(). + assert(w != (size_t)-1); + if (w == (size_t)-1) + w = len; + + // If the translated string is wider than the minimum width + // set at compile time, increase the width. + if ((size_t)(headings[HEADING_CHECK].columns) < w) + headings[HEADING_CHECK].columns = w; + } + + for (unsigned i = 0; i < ARRAY_SIZE(headings); ++i) { + size_t len; + size_t w = tuklib_mbstr_width(_(headings[i].str), &len); + + // Error handling like in init_colon_strs(). + assert(w != (size_t)-1); + if (w == (size_t)-1) + w = len; + + // If the translated string is wider than the minimum width + // set at compile time, increase the width. + if ((size_t)(headings[i].columns) < w) + headings[i].columns = w; + + // Calculate the field width for printf("%*s") so that + // the string uses .columns number of columns on a terminal. + headings[i].fw = (int)(len + (size_t)headings[i].columns - w); + } + + return; +} + + +/// Initialize the printf field widths that are needed to get nicely aligned +/// output with translated strings. +static void +init_field_widths(void) +{ + init_colon_strs(); + init_headings(); + return; +} + + +/// Convert XZ Utils version number to a string. +static const char * +xz_ver_to_str(uint32_t ver) +{ + static char buf[32]; + + unsigned int major = ver / 10000000U; + ver -= major * 10000000U; + + unsigned int minor = ver / 10000U; + ver -= minor * 10000U; + + unsigned int patch = ver / 10U; + ver -= patch * 10U; + + const char *stability = ver == 0 ? "alpha" : ver == 1 ? "beta" : ""; + + snprintf(buf, sizeof(buf), "%u.%u.%u%s", + major, minor, patch, stability); + return buf; +} + + +/// \brief Parse the Index(es) from the given .xz file +/// +/// \param xfi Pointer to structure where the decoded information +/// is stored. +/// \param pair Input file +/// +/// \return On success, false is returned. On error, true is returned. +/// +static bool +parse_indexes(xz_file_info *xfi, file_pair *pair) +{ + if (pair->src_st.st_size <= 0) { + message_error(_("%s: File is empty"), pair->src_name); + return true; + } + + if (pair->src_st.st_size < 2 * LZMA_STREAM_HEADER_SIZE) { + message_error(_("%s: Too small to be a valid .xz file"), + pair->src_name); + return true; + } + + io_buf buf; + lzma_stream strm = LZMA_STREAM_INIT; + lzma_index *idx = NULL; + + lzma_ret ret = lzma_file_info_decoder(&strm, &idx, + hardware_memlimit_get(MODE_LIST), + (uint64_t)(pair->src_st.st_size)); + if (ret != LZMA_OK) { + message_error("%s: %s", pair->src_name, message_strm(ret)); + return true; + } + + while (true) { + if (strm.avail_in == 0) { + strm.next_in = buf.u8; + strm.avail_in = io_read(pair, &buf, IO_BUFFER_SIZE); + if (strm.avail_in == SIZE_MAX) + goto error; + } + + ret = lzma_code(&strm, LZMA_RUN); + + switch (ret) { + case LZMA_OK: + break; + + case LZMA_SEEK_NEEDED: + // liblzma won't ask us to seek past the known size + // of the input file. + assert(strm.seek_pos + <= (uint64_t)(pair->src_st.st_size)); + if (io_seek_src(pair, strm.seek_pos)) + goto error; + + // avail_in must be zero so that we will read new + // input. + strm.avail_in = 0; + break; + + case LZMA_STREAM_END: { + lzma_end(&strm); + xfi->idx = idx; + + // Calculate xfi->stream_padding. + lzma_index_iter iter; + lzma_index_iter_init(&iter, xfi->idx); + while (!lzma_index_iter_next(&iter, + LZMA_INDEX_ITER_STREAM)) + xfi->stream_padding += iter.stream.padding; + + return false; + } + + default: + message_error("%s: %s", pair->src_name, + message_strm(ret)); + + // If the error was too low memory usage limit, + // show also how much memory would have been needed. + if (ret == LZMA_MEMLIMIT_ERROR) + message_mem_needed(V_ERROR, + lzma_memusage(&strm)); + + goto error; + } + } + +error: + lzma_end(&strm); + return true; +} + + +/// \brief Parse the Block Header +/// +/// The result is stored into *bhi. The caller takes care of initializing it. +/// +/// \return False on success, true on error. +static bool +parse_block_header(file_pair *pair, const lzma_index_iter *iter, + block_header_info *bhi, xz_file_info *xfi) +{ +#if IO_BUFFER_SIZE < LZMA_BLOCK_HEADER_SIZE_MAX +# error IO_BUFFER_SIZE < LZMA_BLOCK_HEADER_SIZE_MAX +#endif + + // Get the whole Block Header with one read, but don't read past + // the end of the Block (or even its Check field). + const uint32_t size = my_min(iter->block.total_size + - lzma_check_size(iter->stream.flags->check), + LZMA_BLOCK_HEADER_SIZE_MAX); + io_buf buf; + if (io_pread(pair, &buf, size, iter->block.compressed_file_offset)) + return true; + + // Zero would mean Index Indicator and thus not a valid Block. + if (buf.u8[0] == 0) + goto data_error; + + // Initialize the block structure and decode Block Header Size. + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + lzma_block block; + block.version = 0; + block.check = iter->stream.flags->check; + block.filters = filters; + + block.header_size = lzma_block_header_size_decode(buf.u8[0]); + if (block.header_size > size) + goto data_error; + + // Decode the Block Header. + switch (lzma_block_header_decode(&block, NULL, buf.u8)) { + case LZMA_OK: + break; + + case LZMA_OPTIONS_ERROR: + message_error("%s: %s", pair->src_name, + message_strm(LZMA_OPTIONS_ERROR)); + return true; + + case LZMA_DATA_ERROR: + goto data_error; + + default: + message_bug(); + } + + // Check the Block Flags. These must be done before calling + // lzma_block_compressed_size(), because it overwrites + // block.compressed_size. + // + // NOTE: If you add new characters here, update the minimum number of + // columns in headings[HEADING_HEADERFLAGS] to match the number of + // characters used here. + bhi->flags[0] = block.compressed_size != LZMA_VLI_UNKNOWN + ? 'c' : '-'; + bhi->flags[1] = block.uncompressed_size != LZMA_VLI_UNKNOWN + ? 'u' : '-'; + bhi->flags[2] = '\0'; + + // Collect information if all Blocks have both Compressed Size + // and Uncompressed Size fields. They can be useful e.g. for + // multi-threaded decompression so it can be useful to know it. + xfi->all_have_sizes &= block.compressed_size != LZMA_VLI_UNKNOWN + && block.uncompressed_size != LZMA_VLI_UNKNOWN; + + // Validate or set block.compressed_size. + switch (lzma_block_compressed_size(&block, + iter->block.unpadded_size)) { + case LZMA_OK: + // Validate also block.uncompressed_size if it is present. + // If it isn't present, there's no need to set it since + // we aren't going to actually decompress the Block; if + // we were decompressing, then we should set it so that + // the Block decoder could validate the Uncompressed Size + // that was stored in the Index. + if (block.uncompressed_size == LZMA_VLI_UNKNOWN + || block.uncompressed_size + == iter->block.uncompressed_size) + break; + + // If the above fails, the file is corrupt so + // LZMA_DATA_ERROR is a good error code. + + // Fall through + + case LZMA_DATA_ERROR: + // Free the memory allocated by lzma_block_header_decode(). + lzma_filters_free(filters, NULL); + goto data_error; + + default: + message_bug(); + } + + // Copy the known sizes. + bhi->header_size = block.header_size; + bhi->compressed_size = block.compressed_size; + + // Calculate the decoder memory usage and update the maximum + // memory usage of this Block. + bhi->memusage = lzma_raw_decoder_memusage(filters); + if (xfi->memusage_max < bhi->memusage) + xfi->memusage_max = bhi->memusage; + + // Determine the minimum XZ Utils version that supports this Block. + // + // - ARM64 filter needs 5.4.0. + // + // - 5.0.0 doesn't support empty LZMA2 streams and thus empty + // Blocks that use LZMA2. This decoder bug was fixed in 5.0.2. + if (xfi->min_version < 50040002U) { + for (size_t i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i) { + if (filters[i].id == LZMA_FILTER_ARM64) { + xfi->min_version = 50040002U; + break; + } + } + } + + if (xfi->min_version < 50000022U) { + size_t i = 0; + while (filters[i + 1].id != LZMA_VLI_UNKNOWN) + ++i; + + if (filters[i].id == LZMA_FILTER_LZMA2 + && iter->block.uncompressed_size == 0) + xfi->min_version = 50000022U; + } + + // Convert the filter chain to human readable form. + const lzma_ret str_ret = lzma_str_from_filters( + &bhi->filter_chain, filters, + LZMA_STR_DECODER | LZMA_STR_GETOPT_LONG, NULL); + + // Free the memory allocated by lzma_block_header_decode(). + lzma_filters_free(filters, NULL); + + // Check if the stringification succeeded. + if (str_ret != LZMA_OK) { + message_error("%s: %s", pair->src_name, message_strm(str_ret)); + return true; + } + + return false; + +data_error: + // Show the error message. + message_error("%s: %s", pair->src_name, + message_strm(LZMA_DATA_ERROR)); + return true; +} + + +/// \brief Parse the Check field and put it into check_value[] +/// +/// \return False on success, true on error. +static bool +parse_check_value(file_pair *pair, const lzma_index_iter *iter) +{ + // Don't read anything from the file if there is no integrity Check. + if (iter->stream.flags->check == LZMA_CHECK_NONE) { + snprintf(check_value, sizeof(check_value), "---"); + return false; + } + + // Locate and read the Check field. + const uint32_t size = lzma_check_size(iter->stream.flags->check); + const uint64_t offset = iter->block.compressed_file_offset + + iter->block.total_size - size; + io_buf buf; + if (io_pread(pair, &buf, size, offset)) + return true; + + // CRC32 and CRC64 are in little endian. Guess that all the future + // 32-bit and 64-bit Check values are little endian too. It shouldn't + // be a too big problem if this guess is wrong. + if (size == 4) + snprintf(check_value, sizeof(check_value), + "%08" PRIx32, conv32le(buf.u32[0])); + else if (size == 8) + snprintf(check_value, sizeof(check_value), + "%016" PRIx64, conv64le(buf.u64[0])); + else + for (size_t i = 0; i < size; ++i) + snprintf(check_value + i * 2, 3, "%02x", buf.u8[i]); + + return false; +} + + +/// \brief Parse detailed information about a Block +/// +/// Since this requires seek(s), listing information about all Blocks can +/// be slow. +/// +/// \param pair Input file +/// \param iter Location of the Block whose Check value should +/// be printed. +/// \param bhi Pointer to structure where to store the information +/// about the Block Header field. +/// +/// \return False on success, true on error. If an error occurs, +/// the error message is printed too so the caller doesn't +/// need to worry about that. +static bool +parse_details(file_pair *pair, const lzma_index_iter *iter, + block_header_info *bhi, xz_file_info *xfi) +{ + if (parse_block_header(pair, iter, bhi, xfi)) + return true; + + if (parse_check_value(pair, iter)) + return true; + + return false; +} + + +/// \brief Get the compression ratio +/// +/// This has slightly different format than that is used in message.c. +static const char * +get_ratio(uint64_t compressed_size, uint64_t uncompressed_size) +{ + if (uncompressed_size == 0) + return "---"; + + const double ratio = (double)(compressed_size) + / (double)(uncompressed_size); + if (ratio > 9.999) + return "---"; + + static char buf[16]; + snprintf(buf, sizeof(buf), "%.3f", ratio); + return buf; +} + + +/// \brief Get a comma-separated list of Check names +/// +/// The check names are translated with gettext except when in robot mode. +/// +/// \param buf Buffer to hold the resulting string +/// \param checks Bit mask of Checks to print +/// \param space_after_comma +/// It's better to not use spaces in table-like listings, +/// but in more verbose formats a space after a comma +/// is good for readability. +static void +get_check_names(char buf[CHECKS_STR_SIZE], + uint32_t checks, bool space_after_comma) +{ + // If we get called when there are no Checks to print, set checks + // to 1 so that we print "None". This can happen in the robot mode + // when printing the totals line if there are no valid input files. + if (checks == 0) + checks = 1; + + char *pos = buf; + size_t left = CHECKS_STR_SIZE; + + const char *sep = space_after_comma ? ", " : ","; + bool comma = false; + + for (size_t i = 0; i <= LZMA_CHECK_ID_MAX; ++i) { + if (checks & (UINT32_C(1) << i)) { + my_snprintf(&pos, &left, "%s%s", + comma ? sep : "", + opt_robot ? check_names[i] + : _(check_names[i])); + comma = true; + } + } + + return; +} + + +static bool +print_info_basic(const xz_file_info *xfi, file_pair *pair) +{ + static bool headings_displayed = false; + if (!headings_displayed) { + headings_displayed = true; + // TRANSLATORS: These are column headings. From Strms (Streams) + // to Ratio, the columns are right aligned. Check and Filename + // are left aligned. If you need longer words, it's OK to + // use two lines here. Test with "xz -l foo.xz". + puts(_("Strms Blocks Compressed Uncompressed Ratio " + "Check Filename")); + } + + char checks[CHECKS_STR_SIZE]; + get_check_names(checks, lzma_index_checks(xfi->idx), false); + + const char *cols[7] = { + uint64_to_str(lzma_index_stream_count(xfi->idx), 0), + uint64_to_str(lzma_index_block_count(xfi->idx), 1), + uint64_to_nicestr(lzma_index_file_size(xfi->idx), + NICESTR_B, NICESTR_TIB, false, 2), + uint64_to_nicestr(lzma_index_uncompressed_size(xfi->idx), + NICESTR_B, NICESTR_TIB, false, 3), + get_ratio(lzma_index_file_size(xfi->idx), + lzma_index_uncompressed_size(xfi->idx)), + checks, + pair->src_name, + }; + printf("%*s %*s %*s %*s %*s %-*s %s\n", + tuklib_mbstr_fw(cols[0], 5), cols[0], + tuklib_mbstr_fw(cols[1], 7), cols[1], + tuklib_mbstr_fw(cols[2], 11), cols[2], + tuklib_mbstr_fw(cols[3], 11), cols[3], + tuklib_mbstr_fw(cols[4], 5), cols[4], + tuklib_mbstr_fw(cols[5], 7), cols[5], + cols[6]); + + return false; +} + + +static void +print_adv_helper(uint64_t stream_count, uint64_t block_count, + uint64_t compressed_size, uint64_t uncompressed_size, + uint32_t checks, uint64_t stream_padding) +{ + char checks_str[CHECKS_STR_SIZE]; + get_check_names(checks_str, checks, true); + + printf(" %-*s %s\n", COLON_STR(COLON_STR_STREAMS), + uint64_to_str(stream_count, 0)); + printf(" %-*s %s\n", COLON_STR(COLON_STR_BLOCKS), + uint64_to_str(block_count, 0)); + printf(" %-*s %s\n", COLON_STR(COLON_STR_COMPRESSED_SIZE), + uint64_to_nicestr(compressed_size, + NICESTR_B, NICESTR_TIB, true, 0)); + printf(" %-*s %s\n", COLON_STR(COLON_STR_UNCOMPRESSED_SIZE), + uint64_to_nicestr(uncompressed_size, + NICESTR_B, NICESTR_TIB, true, 0)); + printf(" %-*s %s\n", COLON_STR(COLON_STR_RATIO), + get_ratio(compressed_size, uncompressed_size)); + printf(" %-*s %s\n", COLON_STR(COLON_STR_CHECK), checks_str); + printf(" %-*s %s\n", COLON_STR(COLON_STR_STREAM_PADDING), + uint64_to_nicestr(stream_padding, + NICESTR_B, NICESTR_TIB, true, 0)); + return; +} + + +static bool +print_info_adv(xz_file_info *xfi, file_pair *pair) +{ + // Print the overall information. + print_adv_helper(lzma_index_stream_count(xfi->idx), + lzma_index_block_count(xfi->idx), + lzma_index_file_size(xfi->idx), + lzma_index_uncompressed_size(xfi->idx), + lzma_index_checks(xfi->idx), + xfi->stream_padding); + + // Size of the biggest Check. This is used to calculate the width + // of the CheckVal field. The table would get insanely wide if + // we always reserved space for 64-byte Check (128 chars as hex). + uint32_t check_max = 0; + + // Print information about the Streams. + // + // All except Check are right aligned; Check is left aligned. + // Test with "xz -lv foo.xz". + printf(" %s\n %*s %*s %*s %*s %*s %*s %*s %-*s %*s\n", + _(colon_strs[COLON_STR_STREAMS]), + HEADING_STR(HEADING_STREAM), + HEADING_STR(HEADING_BLOCKS), + HEADING_STR(HEADING_COMPOFFSET), + HEADING_STR(HEADING_UNCOMPOFFSET), + HEADING_STR(HEADING_COMPSIZE), + HEADING_STR(HEADING_UNCOMPSIZE), + HEADING_STR(HEADING_RATIO), + HEADING_STR(HEADING_CHECK), + HEADING_STR(HEADING_PADDING)); + + lzma_index_iter iter; + lzma_index_iter_init(&iter, xfi->idx); + + while (!lzma_index_iter_next(&iter, LZMA_INDEX_ITER_STREAM)) { + const char *cols1[4] = { + uint64_to_str(iter.stream.number, 0), + uint64_to_str(iter.stream.block_count, 1), + uint64_to_str(iter.stream.compressed_offset, 2), + uint64_to_str(iter.stream.uncompressed_offset, 3), + }; + printf(" %*s %*s %*s %*s ", + tuklib_mbstr_fw(cols1[0], + headings[HEADING_STREAM].columns), + cols1[0], + tuklib_mbstr_fw(cols1[1], + headings[HEADING_BLOCKS].columns), + cols1[1], + tuklib_mbstr_fw(cols1[2], + headings[HEADING_COMPOFFSET].columns), + cols1[2], + tuklib_mbstr_fw(cols1[3], + headings[HEADING_UNCOMPOFFSET].columns), + cols1[3]); + + const char *cols2[5] = { + uint64_to_str(iter.stream.compressed_size, 0), + uint64_to_str(iter.stream.uncompressed_size, 1), + get_ratio(iter.stream.compressed_size, + iter.stream.uncompressed_size), + _(check_names[iter.stream.flags->check]), + uint64_to_str(iter.stream.padding, 2), + }; + printf("%*s %*s %*s %-*s %*s\n", + tuklib_mbstr_fw(cols2[0], + headings[HEADING_COMPSIZE].columns), + cols2[0], + tuklib_mbstr_fw(cols2[1], + headings[HEADING_UNCOMPSIZE].columns), + cols2[1], + tuklib_mbstr_fw(cols2[2], + headings[HEADING_RATIO].columns), + cols2[2], + tuklib_mbstr_fw(cols2[3], + headings[HEADING_CHECK].columns), + cols2[3], + tuklib_mbstr_fw(cols2[4], + headings[HEADING_PADDING].columns), + cols2[4]); + + // Update the maximum Check size. + if (lzma_check_size(iter.stream.flags->check) > check_max) + check_max = lzma_check_size(iter.stream.flags->check); + } + + // Cache the verbosity level to a local variable. + const bool detailed = message_verbosity_get() >= V_DEBUG; + + // Print information about the Blocks but only if there is + // at least one Block. + if (lzma_index_block_count(xfi->idx) > 0) { + // Calculate the width of the CheckVal column. This can be + // used as is as the field width for printf() when printing + // the actual check value as it is hexadecimal. However, to + // print the column heading, further calculation is needed + // to handle a translated string (it's done a few lines later). + assert(check_max <= LZMA_CHECK_SIZE_MAX); + const int checkval_width = my_max( + headings[HEADING_CHECKVAL].columns, + (int)(2 * check_max)); + + // All except Check are right aligned; Check is left aligned. + printf(" %s\n %*s %*s %*s %*s %*s %*s %*s %-*s", + _(colon_strs[COLON_STR_BLOCKS]), + HEADING_STR(HEADING_STREAM), + HEADING_STR(HEADING_BLOCK), + HEADING_STR(HEADING_COMPOFFSET), + HEADING_STR(HEADING_UNCOMPOFFSET), + HEADING_STR(HEADING_TOTALSIZE), + HEADING_STR(HEADING_UNCOMPSIZE), + HEADING_STR(HEADING_RATIO), + detailed ? headings[HEADING_CHECK].fw : 1, + _(headings[HEADING_CHECK].str)); + + if (detailed) { + // CheckVal (Check value), Flags, and Filters are + // left aligned. Block Header Size, CompSize, and + // MemUsage are right aligned. Test with + // "xz -lvv foo.xz". + printf(" %-*s %*s %-*s %*s %*s %s", + headings[HEADING_CHECKVAL].fw + + checkval_width + - headings[HEADING_CHECKVAL].columns, + _(headings[HEADING_CHECKVAL].str), + HEADING_STR(HEADING_HEADERSIZE), + HEADING_STR(HEADING_HEADERFLAGS), + HEADING_STR(HEADING_COMPSIZE), + HEADING_STR(HEADING_MEMUSAGE), + _(headings[HEADING_FILTERS].str)); + } + + putchar('\n'); + + lzma_index_iter_init(&iter, xfi->idx); + + // Iterate over the Blocks. + while (!lzma_index_iter_next(&iter, LZMA_INDEX_ITER_BLOCK)) { + // If in detailed mode, collect the information from + // Block Header before starting to print the next line. + block_header_info bhi = BLOCK_HEADER_INFO_INIT; + if (detailed && parse_details(pair, &iter, &bhi, xfi)) + return true; + + const char *cols1[4] = { + uint64_to_str(iter.stream.number, 0), + uint64_to_str( + iter.block.number_in_stream, 1), + uint64_to_str( + iter.block.compressed_file_offset, 2), + uint64_to_str( + iter.block.uncompressed_file_offset, 3) + }; + printf(" %*s %*s %*s %*s ", + tuklib_mbstr_fw(cols1[0], + headings[HEADING_STREAM].columns), + cols1[0], + tuklib_mbstr_fw(cols1[1], + headings[HEADING_BLOCK].columns), + cols1[1], + tuklib_mbstr_fw(cols1[2], + headings[HEADING_COMPOFFSET].columns), + cols1[2], + tuklib_mbstr_fw(cols1[3], headings[ + HEADING_UNCOMPOFFSET].columns), + cols1[3]); + + const char *cols2[4] = { + uint64_to_str(iter.block.total_size, 0), + uint64_to_str(iter.block.uncompressed_size, + 1), + get_ratio(iter.block.total_size, + iter.block.uncompressed_size), + _(check_names[iter.stream.flags->check]) + }; + printf("%*s %*s %*s %-*s", + tuklib_mbstr_fw(cols2[0], + headings[HEADING_TOTALSIZE].columns), + cols2[0], + tuklib_mbstr_fw(cols2[1], + headings[HEADING_UNCOMPSIZE].columns), + cols2[1], + tuklib_mbstr_fw(cols2[2], + headings[HEADING_RATIO].columns), + cols2[2], + tuklib_mbstr_fw(cols2[3], detailed + ? headings[HEADING_CHECK].columns : 1), + cols2[3]); + + if (detailed) { + const lzma_vli compressed_size + = iter.block.unpadded_size + - bhi.header_size + - lzma_check_size( + iter.stream.flags->check); + + const char *cols3[6] = { + check_value, + uint64_to_str(bhi.header_size, 0), + bhi.flags, + uint64_to_str(compressed_size, 1), + uint64_to_str( + round_up_to_mib(bhi.memusage), + 2), + bhi.filter_chain + }; + // Show MiB for memory usage, because it + // is the only size which is not in bytes. + printf(" %-*s %*s %-*s %*s %*s MiB %s", + checkval_width, cols3[0], + tuklib_mbstr_fw(cols3[1], headings[ + HEADING_HEADERSIZE].columns), + cols3[1], + tuklib_mbstr_fw(cols3[2], headings[ + HEADING_HEADERFLAGS].columns), + cols3[2], + tuklib_mbstr_fw(cols3[3], headings[ + HEADING_COMPSIZE].columns), + cols3[3], + tuklib_mbstr_fw(cols3[4], headings[ + HEADING_MEMUSAGE].columns - 4), + cols3[4], + cols3[5]); + } + + putchar('\n'); + block_header_info_end(&bhi); + } + } + + if (detailed) { + printf(" %-*s %s MiB\n", COLON_STR(COLON_STR_MEMORY_NEEDED), + uint64_to_str( + round_up_to_mib(xfi->memusage_max), 0)); + printf(" %-*s %s\n", COLON_STR(COLON_STR_SIZES_IN_HEADERS), + xfi->all_have_sizes ? _("Yes") : _("No")); + //printf(" %-*s %s\n", COLON_STR(COLON_STR_MINIMUM_XZ_VERSION), + printf(_(" Minimum XZ Utils version: %s\n"), + xz_ver_to_str(xfi->min_version)); + } + + return false; +} + + +static bool +print_info_robot(xz_file_info *xfi, file_pair *pair) +{ + char checks[CHECKS_STR_SIZE]; + get_check_names(checks, lzma_index_checks(xfi->idx), false); + + printf("name\t%s\n", pair->src_name); + + printf("file\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 + "\t%s\t%s\t%" PRIu64 "\n", + lzma_index_stream_count(xfi->idx), + lzma_index_block_count(xfi->idx), + lzma_index_file_size(xfi->idx), + lzma_index_uncompressed_size(xfi->idx), + get_ratio(lzma_index_file_size(xfi->idx), + lzma_index_uncompressed_size(xfi->idx)), + checks, + xfi->stream_padding); + + if (message_verbosity_get() >= V_VERBOSE) { + lzma_index_iter iter; + lzma_index_iter_init(&iter, xfi->idx); + + while (!lzma_index_iter_next(&iter, LZMA_INDEX_ITER_STREAM)) + printf("stream\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 + "\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 + "\t%s\t%s\t%" PRIu64 "\n", + iter.stream.number, + iter.stream.block_count, + iter.stream.compressed_offset, + iter.stream.uncompressed_offset, + iter.stream.compressed_size, + iter.stream.uncompressed_size, + get_ratio(iter.stream.compressed_size, + iter.stream.uncompressed_size), + check_names[iter.stream.flags->check], + iter.stream.padding); + + lzma_index_iter_rewind(&iter); + + while (!lzma_index_iter_next(&iter, LZMA_INDEX_ITER_BLOCK)) { + block_header_info bhi = BLOCK_HEADER_INFO_INIT; + if (message_verbosity_get() >= V_DEBUG + && parse_details( + pair, &iter, &bhi, xfi)) + return true; + + printf("block\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 + "\t%" PRIu64 "\t%" PRIu64 + "\t%" PRIu64 "\t%" PRIu64 "\t%s\t%s", + iter.stream.number, + iter.block.number_in_stream, + iter.block.number_in_file, + iter.block.compressed_file_offset, + iter.block.uncompressed_file_offset, + iter.block.total_size, + iter.block.uncompressed_size, + get_ratio(iter.block.total_size, + iter.block.uncompressed_size), + check_names[iter.stream.flags->check]); + + if (message_verbosity_get() >= V_DEBUG) + printf("\t%s\t%" PRIu32 "\t%s\t%" PRIu64 + "\t%" PRIu64 "\t%s", + check_value, + bhi.header_size, + bhi.flags, + bhi.compressed_size, + bhi.memusage, + bhi.filter_chain); + + putchar('\n'); + block_header_info_end(&bhi); + } + } + + if (message_verbosity_get() >= V_DEBUG) + printf("summary\t%" PRIu64 "\t%s\t%" PRIu32 "\n", + xfi->memusage_max, + xfi->all_have_sizes ? "yes" : "no", + xfi->min_version); + + return false; +} + + +static void +update_totals(const xz_file_info *xfi) +{ + // TODO: Integer overflow checks + ++totals.files; + totals.streams += lzma_index_stream_count(xfi->idx); + totals.blocks += lzma_index_block_count(xfi->idx); + totals.compressed_size += lzma_index_file_size(xfi->idx); + totals.uncompressed_size += lzma_index_uncompressed_size(xfi->idx); + totals.stream_padding += xfi->stream_padding; + totals.checks |= lzma_index_checks(xfi->idx); + + if (totals.memusage_max < xfi->memusage_max) + totals.memusage_max = xfi->memusage_max; + + if (totals.min_version < xfi->min_version) + totals.min_version = xfi->min_version; + + totals.all_have_sizes &= xfi->all_have_sizes; + + return; +} + + +static void +print_totals_basic(void) +{ + // Print a separator line. + char line[80]; + memset(line, '-', sizeof(line)); + line[sizeof(line) - 1] = '\0'; + puts(line); + + // Get the check names. + char checks[CHECKS_STR_SIZE]; + get_check_names(checks, totals.checks, false); + + // Print the totals except the file count, which needs + // special handling. + printf("%5s %7s %11s %11s %5s %-7s ", + uint64_to_str(totals.streams, 0), + uint64_to_str(totals.blocks, 1), + uint64_to_nicestr(totals.compressed_size, + NICESTR_B, NICESTR_TIB, false, 2), + uint64_to_nicestr(totals.uncompressed_size, + NICESTR_B, NICESTR_TIB, false, 3), + get_ratio(totals.compressed_size, + totals.uncompressed_size), + checks); + + // Since we print totals only when there are at least two files, + // the English message will always use "%s files". But some other + // languages need different forms for different plurals so we + // have to translate this with ngettext(). + // + // TRANSLATORS: %s is an integer. Only the plural form of this + // message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz". + printf(ngettext("%s file\n", "%s files\n", + totals.files <= ULONG_MAX ? totals.files + : (totals.files % 1000000) + 1000000), + uint64_to_str(totals.files, 0)); + + return; +} + + +static void +print_totals_adv(void) +{ + putchar('\n'); + puts(_("Totals:")); + printf(" %-*s %s\n", COLON_STR(COLON_STR_NUMBER_OF_FILES), + uint64_to_str(totals.files, 0)); + print_adv_helper(totals.streams, totals.blocks, + totals.compressed_size, totals.uncompressed_size, + totals.checks, totals.stream_padding); + + if (message_verbosity_get() >= V_DEBUG) { + printf(" %-*s %s MiB\n", COLON_STR(COLON_STR_MEMORY_NEEDED), + uint64_to_str( + round_up_to_mib(totals.memusage_max), 0)); + printf(" %-*s %s\n", COLON_STR(COLON_STR_SIZES_IN_HEADERS), + totals.all_have_sizes ? _("Yes") : _("No")); + //printf(" %-*s %s\n", COLON_STR(COLON_STR_MINIMUM_XZ_VERSION), + printf(_(" Minimum XZ Utils version: %s\n"), + xz_ver_to_str(totals.min_version)); + } + + return; +} + + +static void +print_totals_robot(void) +{ + char checks[CHECKS_STR_SIZE]; + get_check_names(checks, totals.checks, false); + + printf("totals\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 "\t%" PRIu64 + "\t%s\t%s\t%" PRIu64 "\t%" PRIu64, + totals.streams, + totals.blocks, + totals.compressed_size, + totals.uncompressed_size, + get_ratio(totals.compressed_size, + totals.uncompressed_size), + checks, + totals.stream_padding, + totals.files); + + if (message_verbosity_get() >= V_DEBUG) + printf("\t%" PRIu64 "\t%s\t%" PRIu32, + totals.memusage_max, + totals.all_have_sizes ? "yes" : "no", + totals.min_version); + + putchar('\n'); + + return; +} + + +extern void +list_totals(void) +{ + if (opt_robot) { + // Always print totals in --robot mode. It can be convenient + // in some cases and doesn't complicate usage of the + // single-file case much. + print_totals_robot(); + + } else if (totals.files > 1) { + // For non-robot mode, totals are printed only if there + // is more than one file. + if (message_verbosity_get() <= V_WARNING) + print_totals_basic(); + else + print_totals_adv(); + } + + return; +} + + +extern void +list_file(const char *filename) +{ + if (opt_format != FORMAT_XZ && opt_format != FORMAT_AUTO) + message_fatal(_("--list works only on .xz files " + "(--format=xz or --format=auto)")); + + message_filename(filename); + + if (filename == stdin_filename) { + message_error(_("--list does not support reading from " + "standard input")); + return; + } + + init_field_widths(); + + // Unset opt_stdout so that io_open_src() won't accept special files. + // Set opt_force so that io_open_src() will follow symlinks. + opt_stdout = false; + opt_force = true; + file_pair *pair = io_open_src(filename); + if (pair == NULL) + return; + + xz_file_info xfi = XZ_FILE_INFO_INIT; + if (!parse_indexes(&xfi, pair)) { + bool fail; + + // We have three main modes: + // - --robot, which has submodes if --verbose is specified + // once or twice + // - Normal --list without --verbose + // - --list with one or two --verbose + if (opt_robot) + fail = print_info_robot(&xfi, pair); + else if (message_verbosity_get() <= V_WARNING) + fail = print_info_basic(&xfi, pair); + else + fail = print_info_adv(&xfi, pair); + + // Update the totals that are displayed after all + // the individual files have been listed. Don't count + // broken files. + if (!fail) + update_totals(&xfi); + + lzma_index_end(xfi.idx, NULL); + } + + io_close(pair, false); + return; +} diff --git a/src/xz/list.h b/src/xz/list.h new file mode 100644 index 0000000..a4c6ec7 --- /dev/null +++ b/src/xz/list.h @@ -0,0 +1,18 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file list.h +/// \brief List information about .xz files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// \brief List information about the given .xz file +extern void list_file(const char *filename); + + +/// \brief Show the totals after all files have been listed +extern void list_totals(void); diff --git a/src/xz/main.c b/src/xz/main.c new file mode 100644 index 0000000..c9c3dec --- /dev/null +++ b/src/xz/main.c @@ -0,0 +1,344 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file main.c +/// \brief main() +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" +#include + +/// Exit status to use. This can be changed with set_exit_status(). +static enum exit_status_type exit_status = E_SUCCESS; + +#if defined(_WIN32) && !defined(__CYGWIN__) +/// exit_status has to be protected with a critical section due to +/// how "signal handling" is done on Windows. See signals.c for details. +static CRITICAL_SECTION exit_status_cs; +#endif + +/// True if --no-warn is specified. When this is true, we don't set +/// the exit status to E_WARNING when something worth a warning happens. +static bool no_warn = false; + + +extern void +set_exit_status(enum exit_status_type new_status) +{ + assert(new_status == E_WARNING || new_status == E_ERROR); + +#if defined(_WIN32) && !defined(__CYGWIN__) + EnterCriticalSection(&exit_status_cs); +#endif + + if (exit_status != E_ERROR) + exit_status = new_status; + +#if defined(_WIN32) && !defined(__CYGWIN__) + LeaveCriticalSection(&exit_status_cs); +#endif + + return; +} + + +extern void +set_exit_no_warn(void) +{ + no_warn = true; + return; +} + + +static const char * +read_name(const args_info *args) +{ + // FIXME: Maybe we should have some kind of memory usage limit here + // like the tool has for the actual compression and decompression. + // Giving some huge text file with --files0 makes us to read the + // whole file in RAM. + static char *name = NULL; + static size_t size = 256; + + // Allocate the initial buffer. This is never freed, since after it + // is no longer needed, the program exits very soon. It is safe to + // use xmalloc() and xrealloc() in this function, because while + // executing this function, no files are open for writing, and thus + // there's no need to cleanup anything before exiting. + if (name == NULL) + name = xmalloc(size); + + // Write position in name + size_t pos = 0; + + // Read one character at a time into name. + while (!user_abort) { + const int c = fgetc(args->files_file); + + if (ferror(args->files_file)) { + // Take care of EINTR since we have established + // the signal handlers already. + if (errno == EINTR) + continue; + + message_error(_("%s: Error reading filenames: %s"), + args->files_name, strerror(errno)); + return NULL; + } + + if (feof(args->files_file)) { + if (pos != 0) + message_error(_("%s: Unexpected end of input " + "when reading filenames"), + args->files_name); + + return NULL; + } + + if (c == args->files_delim) { + // We allow consecutive newline (--files) or '\0' + // characters (--files0), and ignore such empty + // filenames. + if (pos == 0) + continue; + + // A non-empty name was read. Terminate it with '\0' + // and return it. + name[pos] = '\0'; + return name; + } + + if (c == '\0') { + // A null character was found when using --files, + // which expects plain text input separated with + // newlines. + message_error(_("%s: Null character found when " + "reading filenames; maybe you meant " + "to use `--files0' instead " + "of `--files'?"), args->files_name); + return NULL; + } + + name[pos++] = c; + + // Allocate more memory if needed. There must always be space + // at least for one character to allow terminating the string + // with '\0'. + if (pos == size) { + size *= 2; + name = xrealloc(name, size); + } + } + + return NULL; +} + + +int +main(int argc, char **argv) +{ +#ifdef HAVE_PLEDGE + // OpenBSD's pledge(2) sandbox + // + // Unconditionally enable sandboxing with fairly relaxed promises. + // This is still way better than having no sandbox at all. :-) + // More strict promises will be made later in file_io.c if possible. + if (pledge("stdio rpath wpath cpath fattr", "")) { + // Don't translate the string or use message_fatal() as + // those haven't been initialized yet. + fprintf(stderr, "%s: Failed to enable the sandbox\n", argv[0]); + return E_ERROR; + } +#endif + +#if defined(_WIN32) && !defined(__CYGWIN__) + InitializeCriticalSection(&exit_status_cs); +#endif + + // Set up the progname variable. + tuklib_progname_init(argv); + + // Initialize the file I/O. This makes sure that + // stdin, stdout, and stderr are something valid. + io_init(); + + // Set up the locale and message translations. + tuklib_gettext_init(PACKAGE, LOCALEDIR); + + // Initialize handling of error/warning/other messages. + message_init(); + + // Set hardware-dependent default values. These can be overridden + // on the command line, thus this must be done before args_parse(). + hardware_init(); + + // Parse the command line arguments and get an array of filenames. + // This doesn't return if something is wrong with the command line + // arguments. If there are no arguments, one filename ("-") is still + // returned to indicate stdin. + args_info args; + args_parse(&args, argc, argv); + + if (opt_mode != MODE_LIST && opt_robot) + message_fatal(_("Compression and decompression with --robot " + "are not supported yet.")); + + // Tell the message handling code how many input files there are if + // we know it. This way the progress indicator can show it. + if (args.files_name != NULL) + message_set_files(0); + else + message_set_files(args.arg_count); + + // Refuse to write compressed data to standard output if it is + // a terminal. + if (opt_mode == MODE_COMPRESS) { + if (opt_stdout || (args.arg_count == 1 + && strcmp(args.arg_names[0], "-") == 0)) { + if (is_tty_stdout()) { + message_try_help(); + tuklib_exit(E_ERROR, E_ERROR, false); + } + } + } + + // Set up the signal handlers. We don't need these before we + // start the actual action and not in --list mode, so this is + // done after parsing the command line arguments. + // + // It's good to keep signal handlers in normal compression and + // decompression modes even when only writing to stdout, because + // we might need to restore O_APPEND flag on stdout before exiting. + // In --test mode, signal handlers aren't really needed, but let's + // keep them there for consistency with normal decompression. + if (opt_mode != MODE_LIST) + signals_init(); + +#ifdef ENABLE_SANDBOX + // Set a flag that sandboxing is allowed if all these are true: + // - --files or --files0 wasn't used. + // - There is exactly one input file or we are reading from stdin. + // - We won't create any files: output goes to stdout or --test + // or --list was used. Note that --test implies opt_stdout = true + // but --list doesn't. + // + // This is obviously not ideal but it was easy to implement and + // it covers the most common use cases. + // + // TODO: Make sandboxing work for other situations too. + if (args.files_name == NULL && args.arg_count == 1 + && (opt_stdout || strcmp("-", args.arg_names[0]) == 0 + || opt_mode == MODE_LIST)) + io_allow_sandbox(); +#endif + + // coder_run() handles compression, decompression, and testing. + // list_file() is for --list. + void (*run)(const char *filename) = &coder_run; +#ifdef HAVE_DECODERS + if (opt_mode == MODE_LIST) + run = &list_file; +#endif + + // Process the files given on the command line. Note that if no names + // were given, args_parse() gave us a fake "-" filename. + for (unsigned i = 0; i < args.arg_count && !user_abort; ++i) { + if (strcmp("-", args.arg_names[i]) == 0) { + // Processing from stdin to stdout. Check that we + // aren't writing compressed data to a terminal or + // reading it from a terminal. + if (opt_mode == MODE_COMPRESS) { + if (is_tty_stdout()) + continue; + } else if (is_tty_stdin()) { + continue; + } + + // It doesn't make sense to compress data from stdin + // if we are supposed to read filenames from stdin + // too (enabled with --files or --files0). + if (args.files_name == stdin_filename) { + message_error(_("Cannot read data from " + "standard input when " + "reading filenames " + "from standard input")); + continue; + } + + // Replace the "-" with a special pointer, which is + // recognized by coder_run() and other things. + // This way error messages get a proper filename + // string and the code still knows that it is + // handling the special case of stdin. + args.arg_names[i] = (char *)stdin_filename; + } + + // Do the actual compression or decompression. + run(args.arg_names[i]); + } + + // If --files or --files0 was used, process the filenames from the + // given file or stdin. Note that here we don't consider "-" to + // indicate stdin like we do with the command line arguments. + if (args.files_name != NULL) { + // read_name() checks for user_abort so we don't need to + // check it as loop termination condition. + while (true) { + const char *name = read_name(&args); + if (name == NULL) + break; + + // read_name() doesn't return empty names. + assert(name[0] != '\0'); + run(name); + } + + if (args.files_name != stdin_filename) + (void)fclose(args.files_file); + } + +#ifdef HAVE_DECODERS + // All files have now been handled. If in --list mode, display + // the totals before exiting. We don't have signal handlers + // enabled in --list mode, so we don't need to check user_abort. + if (opt_mode == MODE_LIST) { + assert(!user_abort); + list_totals(); + } +#endif + +#ifndef NDEBUG + coder_free(); + args_free(); +#endif + + // If we have got a signal, raise it to kill the program instead + // of calling tuklib_exit(). + signals_exit(); + + // Make a local copy of exit_status to keep the Windows code + // thread safe. At this point it is fine if we miss the user + // pressing C-c and don't set the exit_status to E_ERROR on + // Windows. +#if defined(_WIN32) && !defined(__CYGWIN__) + EnterCriticalSection(&exit_status_cs); +#endif + + enum exit_status_type es = exit_status; + +#if defined(_WIN32) && !defined(__CYGWIN__) + LeaveCriticalSection(&exit_status_cs); +#endif + + // Suppress the exit status indicating a warning if --no-warn + // was specified. + if (es == E_WARNING && no_warn) + es = E_SUCCESS; + + tuklib_exit((int)es, E_ERROR, message_verbosity_get() != V_SILENT); +} diff --git a/src/xz/main.h b/src/xz/main.h new file mode 100644 index 0000000..323f2f7 --- /dev/null +++ b/src/xz/main.h @@ -0,0 +1,30 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file main.h +/// \brief Miscellaneous declarations +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// Possible exit status values. These are the same as used by gzip and bzip2. +enum exit_status_type { + E_SUCCESS = 0, + E_ERROR = 1, + E_WARNING = 2, +}; + + +/// Sets the exit status after a warning or error has occurred. If new_status +/// is E_WARNING and the old exit status was already E_ERROR, the exit +/// status is not changed. +extern void set_exit_status(enum exit_status_type new_status); + + +/// Use E_SUCCESS instead of E_WARNING if something worth a warning occurs +/// but nothing worth an error has occurred. This is called when --no-warn +/// is specified. +extern void set_exit_no_warn(void); diff --git a/src/xz/message.c b/src/xz/message.c new file mode 100644 index 0000000..c54ebc5 --- /dev/null +++ b/src/xz/message.c @@ -0,0 +1,1146 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file message.c +/// \brief Printing messages +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + +#include + + +/// Number of the current file +static unsigned int files_pos = 0; + +/// Total number of input files; zero if unknown. +static unsigned int files_total; + +/// Verbosity level +static enum message_verbosity verbosity = V_WARNING; + +/// Filename which we will print with the verbose messages +static const char *filename; + +/// True once the a filename has been printed to stderr as part of progress +/// message. If automatic progress updating isn't enabled, this becomes true +/// after the first progress message has been printed due to user sending +/// SIGINFO, SIGUSR1, or SIGALRM. Once this variable is true, we will print +/// an empty line before the next filename to make the output more readable. +static bool first_filename_printed = false; + +/// This is set to true when we have printed the current filename to stderr +/// as part of a progress message. This variable is useful only if not +/// updating progress automatically: if user sends many SIGINFO, SIGUSR1, or +/// SIGALRM signals, we won't print the name of the same file multiple times. +static bool current_filename_printed = false; + +/// True if we should print progress indicator and update it automatically +/// if also verbose >= V_VERBOSE. +static bool progress_automatic; + +/// True if message_progress_start() has been called but +/// message_progress_end() hasn't been called yet. +static bool progress_started = false; + +/// This is true when a progress message was printed and the cursor is still +/// on the same line with the progress message. In that case, a newline has +/// to be printed before any error messages. +static bool progress_active = false; + +/// Pointer to lzma_stream used to do the encoding or decoding. +static lzma_stream *progress_strm; + +/// This is true if we are in passthru mode (not actually compressing or +/// decompressing) and thus cannot use lzma_get_progress(progress_strm, ...). +/// That is, we are using coder_passthru() in coder.c. +static bool progress_is_from_passthru; + +/// Expected size of the input stream is needed to show completion percentage +/// and estimate remaining time. +static uint64_t expected_in_size; + + +// Use alarm() and SIGALRM when they are supported. This has two minor +// advantages over the alternative of polling gettimeofday(): +// - It is possible for the user to send SIGINFO, SIGUSR1, or SIGALRM to +// get intermediate progress information even when --verbose wasn't used +// or stderr is not a terminal. +// - alarm() + SIGALRM seems to have slightly less overhead than polling +// gettimeofday(). +#ifdef SIGALRM + +const int message_progress_sigs[] = { + SIGALRM, +#ifdef SIGINFO + SIGINFO, +#endif +#ifdef SIGUSR1 + SIGUSR1, +#endif + 0 +}; + +/// The signal handler for SIGALRM sets this to true. It is set back to false +/// once the progress message has been updated. +static volatile sig_atomic_t progress_needs_updating = false; + +/// Signal handler for SIGALRM +static void +progress_signal_handler(int sig lzma_attribute((__unused__))) +{ + progress_needs_updating = true; + return; +} + +#else + +/// This is true when progress message printing is wanted. Using the same +/// variable name as above to avoid some ifdefs. +static bool progress_needs_updating = false; + +/// Elapsed time when the next progress message update should be done. +static uint64_t progress_next_update; + +#endif + + +extern void +message_init(void) +{ + // If --verbose is used, we use a progress indicator if and only + // if stderr is a terminal. If stderr is not a terminal, we print + // verbose information only after finishing the file. As a special + // exception, even if --verbose was not used, user can send SIGALRM + // to make us print progress information once without automatic + // updating. + progress_automatic = isatty(STDERR_FILENO); + + // Commented out because COLUMNS is rarely exported to environment. + // Most users have at least 80 columns anyway, let's think something + // fancy here if enough people complain. +/* + if (progress_automatic) { + // stderr is a terminal. Check the COLUMNS environment + // variable to see if the terminal is wide enough. If COLUMNS + // doesn't exist or it has some unparsable value, we assume + // that the terminal is wide enough. + const char *columns_str = getenv("COLUMNS"); + if (columns_str != NULL) { + char *endptr; + const long columns = strtol(columns_str, &endptr, 10); + if (*endptr != '\0' || columns < 80) + progress_automatic = false; + } + } +*/ + +#ifdef SIGALRM + // Establish the signal handlers which set a flag to tell us that + // progress info should be updated. + struct sigaction sa; + sigemptyset(&sa.sa_mask); + sa.sa_flags = 0; + sa.sa_handler = &progress_signal_handler; + + for (size_t i = 0; message_progress_sigs[i] != 0; ++i) + if (sigaction(message_progress_sigs[i], &sa, NULL)) + message_signal_handler(); +#endif + + return; +} + + +extern void +message_verbosity_increase(void) +{ + if (verbosity < V_DEBUG) + ++verbosity; + + return; +} + + +extern void +message_verbosity_decrease(void) +{ + if (verbosity > V_SILENT) + --verbosity; + + return; +} + + +extern enum message_verbosity +message_verbosity_get(void) +{ + return verbosity; +} + + +extern void +message_set_files(unsigned int files) +{ + files_total = files; + return; +} + + +/// Prints the name of the current file if it hasn't been printed already, +/// except if we are processing exactly one stream from stdin to stdout. +/// I think it looks nicer to not print "(stdin)" when --verbose is used +/// in a pipe and no other files are processed. +static void +print_filename(void) +{ + if (!opt_robot && (files_total != 1 || filename != stdin_filename)) { + signals_block(); + + FILE *file = opt_mode == MODE_LIST ? stdout : stderr; + + // If a file was already processed, put an empty line + // before the next filename to improve readability. + if (first_filename_printed) + fputc('\n', file); + + first_filename_printed = true; + current_filename_printed = true; + + // If we don't know how many files there will be due + // to usage of --files or --files0. + if (files_total == 0) + fprintf(file, "%s (%u)\n", filename, + files_pos); + else + fprintf(file, "%s (%u/%u)\n", filename, + files_pos, files_total); + + signals_unblock(); + } + + return; +} + + +extern void +message_filename(const char *src_name) +{ + // Start numbering the files starting from one. + ++files_pos; + filename = src_name; + + if (verbosity >= V_VERBOSE + && (progress_automatic || opt_mode == MODE_LIST)) + print_filename(); + else + current_filename_printed = false; + + return; +} + + +extern void +message_progress_start(lzma_stream *strm, bool is_passthru, uint64_t in_size) +{ + // Store the pointer to the lzma_stream used to do the coding. + // It is needed to find out the position in the stream. + progress_strm = strm; + progress_is_from_passthru = is_passthru; + + // Store the expected size of the file. If we aren't printing any + // statistics, then is will be unused. But since it is possible + // that the user sends us a signal to show statistics, we need + // to have it available anyway. + expected_in_size = in_size; + + // Indicate that progress info may need to be printed before + // printing error messages. + progress_started = true; + + // If progress indicator is wanted, print the filename and possibly + // the file count now. + if (verbosity >= V_VERBOSE && progress_automatic) { + // Start the timer to display the first progress message + // after one second. An alternative would be to show the + // first message almost immediately, but delaying by one + // second looks better to me, since extremely early + // progress info is pretty much useless. +#ifdef SIGALRM + // First disable a possibly existing alarm. + alarm(0); + progress_needs_updating = false; + alarm(1); +#else + progress_needs_updating = true; + progress_next_update = 1000; +#endif + } + + return; +} + + +/// Make the string indicating completion percentage. +static const char * +progress_percentage(uint64_t in_pos) +{ + // If the size of the input file is unknown or the size told us is + // clearly wrong since we have processed more data than the alleged + // size of the file, show a static string indicating that we have + // no idea of the completion percentage. + if (expected_in_size == 0 || in_pos > expected_in_size) + return "--- %"; + + // Never show 100.0 % before we actually are finished. + double percentage = (double)(in_pos) / (double)(expected_in_size) + * 99.9; + + // Use big enough buffer to hold e.g. a multibyte decimal point. + static char buf[16]; + snprintf(buf, sizeof(buf), "%.1f %%", percentage); + + return buf; +} + + +/// Make the string containing the amount of input processed, amount of +/// output produced, and the compression ratio. +static const char * +progress_sizes(uint64_t compressed_pos, uint64_t uncompressed_pos, bool final) +{ + // Use big enough buffer to hold e.g. a multibyte thousand separators. + static char buf[128]; + char *pos = buf; + size_t left = sizeof(buf); + + // Print the sizes. If this the final message, use more reasonable + // units than MiB if the file was small. + const enum nicestr_unit unit_min = final ? NICESTR_B : NICESTR_MIB; + my_snprintf(&pos, &left, "%s / %s", + uint64_to_nicestr(compressed_pos, + unit_min, NICESTR_TIB, false, 0), + uint64_to_nicestr(uncompressed_pos, + unit_min, NICESTR_TIB, false, 1)); + + // Avoid division by zero. If we cannot calculate the ratio, set + // it to some nice number greater than 10.0 so that it gets caught + // in the next if-clause. + const double ratio = uncompressed_pos > 0 + ? (double)(compressed_pos) / (double)(uncompressed_pos) + : 16.0; + + // If the ratio is very bad, just indicate that it is greater than + // 9.999. This way the length of the ratio field stays fixed. + if (ratio > 9.999) + snprintf(pos, left, " > %.3f", 9.999); + else + snprintf(pos, left, " = %.3f", ratio); + + return buf; +} + + +/// Make the string containing the processing speed of uncompressed data. +static const char * +progress_speed(uint64_t uncompressed_pos, uint64_t elapsed) +{ + // Don't print the speed immediately, since the early values look + // somewhat random. + if (elapsed < 3000) + return ""; + + // The first character of KiB/s, MiB/s, or GiB/s: + static const char unit[] = { 'K', 'M', 'G' }; + + size_t unit_index = 0; + + // Calculate the speed as KiB/s. + double speed = (double)(uncompressed_pos) + / ((double)(elapsed) * (1024.0 / 1000.0)); + + // Adjust the unit of the speed if needed. + while (speed > 999.0) { + speed /= 1024.0; + if (++unit_index == ARRAY_SIZE(unit)) + return ""; // Way too fast ;-) + } + + // Use decimal point only if the number is small. Examples: + // - 0.1 KiB/s + // - 9.9 KiB/s + // - 99 KiB/s + // - 999 KiB/s + // Use big enough buffer to hold e.g. a multibyte decimal point. + static char buf[16]; + snprintf(buf, sizeof(buf), "%.*f %ciB/s", + speed > 9.9 ? 0 : 1, speed, unit[unit_index]); + return buf; +} + + +/// Make a string indicating elapsed time. The format is either +/// M:SS or H:MM:SS depending on if the time is an hour or more. +static const char * +progress_time(uint64_t mseconds) +{ + // 9999 hours = 416 days + static char buf[sizeof("9999:59:59")]; + + // 32-bit variable is enough for elapsed time (136 years). + uint32_t seconds = (uint32_t)(mseconds / 1000); + + // Don't show anything if the time is zero or ridiculously big. + if (seconds == 0 || seconds > ((9999 * 60) + 59) * 60 + 59) + return ""; + + uint32_t minutes = seconds / 60; + seconds %= 60; + + if (minutes >= 60) { + const uint32_t hours = minutes / 60; + minutes %= 60; + snprintf(buf, sizeof(buf), + "%" PRIu32 ":%02" PRIu32 ":%02" PRIu32, + hours, minutes, seconds); + } else { + snprintf(buf, sizeof(buf), "%" PRIu32 ":%02" PRIu32, + minutes, seconds); + } + + return buf; +} + + +/// Return a string containing estimated remaining time when +/// reasonably possible. +static const char * +progress_remaining(uint64_t in_pos, uint64_t elapsed) +{ + // Don't show the estimated remaining time when it wouldn't + // make sense: + // - Input size is unknown. + // - Input has grown bigger since we started (de)compressing. + // - We haven't processed much data yet, so estimate would be + // too inaccurate. + // - Only a few seconds has passed since we started (de)compressing, + // so estimate would be too inaccurate. + if (expected_in_size == 0 || in_pos > expected_in_size + || in_pos < (UINT64_C(1) << 19) || elapsed < 8000) + return ""; + + // Calculate the estimate. Don't give an estimate of zero seconds, + // since it is possible that all the input has been already passed + // to the library, but there is still quite a bit of output pending. + uint32_t remaining = (uint32_t)((double)(expected_in_size - in_pos) + * ((double)(elapsed) / 1000.0) / (double)(in_pos)); + if (remaining < 1) + remaining = 1; + + static char buf[sizeof("9 h 55 min")]; + + // Select appropriate precision for the estimated remaining time. + if (remaining <= 10) { + // A maximum of 10 seconds remaining. + // Show the number of seconds as is. + snprintf(buf, sizeof(buf), "%" PRIu32 " s", remaining); + + } else if (remaining <= 50) { + // A maximum of 50 seconds remaining. + // Round up to the next multiple of five seconds. + remaining = (remaining + 4) / 5 * 5; + snprintf(buf, sizeof(buf), "%" PRIu32 " s", remaining); + + } else if (remaining <= 590) { + // A maximum of 9 minutes and 50 seconds remaining. + // Round up to the next multiple of ten seconds. + remaining = (remaining + 9) / 10 * 10; + snprintf(buf, sizeof(buf), "%" PRIu32 " min %" PRIu32 " s", + remaining / 60, remaining % 60); + + } else if (remaining <= 59 * 60) { + // A maximum of 59 minutes remaining. + // Round up to the next multiple of a minute. + remaining = (remaining + 59) / 60; + snprintf(buf, sizeof(buf), "%" PRIu32 " min", remaining); + + } else if (remaining <= 9 * 3600 + 50 * 60) { + // A maximum of 9 hours and 50 minutes left. + // Round up to the next multiple of ten minutes. + remaining = (remaining + 599) / 600 * 10; + snprintf(buf, sizeof(buf), "%" PRIu32 " h %" PRIu32 " min", + remaining / 60, remaining % 60); + + } else if (remaining <= 23 * 3600) { + // A maximum of 23 hours remaining. + // Round up to the next multiple of an hour. + remaining = (remaining + 3599) / 3600; + snprintf(buf, sizeof(buf), "%" PRIu32 " h", remaining); + + } else if (remaining <= 9 * 24 * 3600 + 23 * 3600) { + // A maximum of 9 days and 23 hours remaining. + // Round up to the next multiple of an hour. + remaining = (remaining + 3599) / 3600; + snprintf(buf, sizeof(buf), "%" PRIu32 " d %" PRIu32 " h", + remaining / 24, remaining % 24); + + } else if (remaining <= 999 * 24 * 3600) { + // A maximum of 999 days remaining. ;-) + // Round up to the next multiple of a day. + remaining = (remaining + 24 * 3600 - 1) / (24 * 3600); + snprintf(buf, sizeof(buf), "%" PRIu32 " d", remaining); + + } else { + // The estimated remaining time is too big. Don't show it. + return ""; + } + + return buf; +} + + +/// Get how much uncompressed and compressed data has been processed. +static void +progress_pos(uint64_t *in_pos, + uint64_t *compressed_pos, uint64_t *uncompressed_pos) +{ + uint64_t out_pos; + if (progress_is_from_passthru) { + // In passthru mode the progress info is in total_in/out but + // the *progress_strm itself isn't initialized and thus we + // cannot use lzma_get_progress(). + *in_pos = progress_strm->total_in; + out_pos = progress_strm->total_out; + } else { + lzma_get_progress(progress_strm, in_pos, &out_pos); + } + + // It cannot have processed more input than it has been given. + assert(*in_pos <= progress_strm->total_in); + + // It cannot have produced more output than it claims to have ready. + assert(out_pos >= progress_strm->total_out); + + if (opt_mode == MODE_COMPRESS) { + *compressed_pos = out_pos; + *uncompressed_pos = *in_pos; + } else { + *compressed_pos = *in_pos; + *uncompressed_pos = out_pos; + } + + return; +} + + +extern void +message_progress_update(void) +{ + if (!progress_needs_updating) + return; + + // Calculate how long we have been processing this file. + const uint64_t elapsed = mytime_get_elapsed(); + +#ifndef SIGALRM + if (progress_next_update > elapsed) + return; + + progress_next_update = elapsed + 1000; +#endif + + // Get our current position in the stream. + uint64_t in_pos; + uint64_t compressed_pos; + uint64_t uncompressed_pos; + progress_pos(&in_pos, &compressed_pos, &uncompressed_pos); + + // Block signals so that fprintf() doesn't get interrupted. + signals_block(); + + // Print the filename if it hasn't been printed yet. + if (!current_filename_printed) + print_filename(); + + // Print the actual progress message. The idea is that there is at + // least three spaces between the fields in typical situations, but + // even in rare situations there is at least one space. + const char *cols[5] = { + progress_percentage(in_pos), + progress_sizes(compressed_pos, uncompressed_pos, false), + progress_speed(uncompressed_pos, elapsed), + progress_time(elapsed), + progress_remaining(in_pos, elapsed), + }; + fprintf(stderr, "\r %*s %*s %*s %10s %10s\r", + tuklib_mbstr_fw(cols[0], 6), cols[0], + tuklib_mbstr_fw(cols[1], 35), cols[1], + tuklib_mbstr_fw(cols[2], 9), cols[2], + cols[3], + cols[4]); + +#ifdef SIGALRM + // Updating the progress info was finished. Reset + // progress_needs_updating to wait for the next SIGALRM. + // + // NOTE: This has to be done before alarm(1) or with (very) bad + // luck we could be setting this to false after the alarm has already + // been triggered. + progress_needs_updating = false; + + if (verbosity >= V_VERBOSE && progress_automatic) { + // Mark that the progress indicator is active, so if an error + // occurs, the error message gets printed cleanly. + progress_active = true; + + // Restart the timer so that progress_needs_updating gets + // set to true after about one second. + alarm(1); + } else { + // The progress message was printed because user had sent us + // SIGALRM. In this case, each progress message is printed + // on its own line. + fputc('\n', stderr); + } +#else + // When SIGALRM isn't supported and we get here, it's always due to + // automatic progress update. We set progress_active here too like + // described above. + assert(verbosity >= V_VERBOSE); + assert(progress_automatic); + progress_active = true; +#endif + + signals_unblock(); + + return; +} + + +static void +progress_flush(bool finished) +{ + if (!progress_started || verbosity < V_VERBOSE) + return; + + uint64_t in_pos; + uint64_t compressed_pos; + uint64_t uncompressed_pos; + progress_pos(&in_pos, &compressed_pos, &uncompressed_pos); + + // Avoid printing intermediate progress info if some error occurs + // in the beginning of the stream. (If something goes wrong later in + // the stream, it is sometimes useful to tell the user where the + // error approximately occurred, especially if the error occurs + // after a time-consuming operation.) + if (!finished && !progress_active + && (compressed_pos == 0 || uncompressed_pos == 0)) + return; + + progress_active = false; + + const uint64_t elapsed = mytime_get_elapsed(); + + signals_block(); + + // When using the auto-updating progress indicator, the final + // statistics are printed in the same format as the progress + // indicator itself. + if (progress_automatic) { + const char *cols[5] = { + finished ? "100 %" : progress_percentage(in_pos), + progress_sizes(compressed_pos, uncompressed_pos, true), + progress_speed(uncompressed_pos, elapsed), + progress_time(elapsed), + finished ? "" : progress_remaining(in_pos, elapsed), + }; + fprintf(stderr, "\r %*s %*s %*s %10s %10s\n", + tuklib_mbstr_fw(cols[0], 6), cols[0], + tuklib_mbstr_fw(cols[1], 35), cols[1], + tuklib_mbstr_fw(cols[2], 9), cols[2], + cols[3], + cols[4]); + } else { + // The filename is always printed. + fprintf(stderr, "%s: ", filename); + + // Percentage is printed only if we didn't finish yet. + if (!finished) { + // Don't print the percentage when it isn't known + // (starts with a dash). + const char *percentage = progress_percentage(in_pos); + if (percentage[0] != '-') + fprintf(stderr, "%s, ", percentage); + } + + // Size information is always printed. + fprintf(stderr, "%s", progress_sizes( + compressed_pos, uncompressed_pos, true)); + + // The speed and elapsed time aren't always shown. + const char *speed = progress_speed(uncompressed_pos, elapsed); + if (speed[0] != '\0') + fprintf(stderr, ", %s", speed); + + const char *elapsed_str = progress_time(elapsed); + if (elapsed_str[0] != '\0') + fprintf(stderr, ", %s", elapsed_str); + + fputc('\n', stderr); + } + + signals_unblock(); + + return; +} + + +extern void +message_progress_end(bool success) +{ + assert(progress_started); + progress_flush(success); + progress_started = false; + return; +} + + +static void +vmessage(enum message_verbosity v, const char *fmt, va_list ap) +{ + if (v <= verbosity) { + signals_block(); + + progress_flush(false); + + // TRANSLATORS: This is the program name in the beginning + // of the line in messages. Usually it becomes "xz: ". + // This is a translatable string because French needs + // a space before a colon. + fprintf(stderr, _("%s: "), progname); + +#ifdef __clang__ +# pragma GCC diagnostic push +# pragma GCC diagnostic ignored "-Wformat-nonliteral" +#endif + vfprintf(stderr, fmt, ap); +#ifdef __clang__ +# pragma GCC diagnostic pop +#endif + + fputc('\n', stderr); + + signals_unblock(); + } + + return; +} + + +extern void +message(enum message_verbosity v, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + vmessage(v, fmt, ap); + va_end(ap); + return; +} + + +extern void +message_warning(const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + vmessage(V_WARNING, fmt, ap); + va_end(ap); + + set_exit_status(E_WARNING); + return; +} + + +extern void +message_error(const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + vmessage(V_ERROR, fmt, ap); + va_end(ap); + + set_exit_status(E_ERROR); + return; +} + + +extern void +message_fatal(const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + vmessage(V_ERROR, fmt, ap); + va_end(ap); + + tuklib_exit(E_ERROR, E_ERROR, false); +} + + +extern void +message_bug(void) +{ + message_fatal(_("Internal error (bug)")); +} + + +extern void +message_signal_handler(void) +{ + message_fatal(_("Cannot establish signal handlers")); +} + + +extern const char * +message_strm(lzma_ret code) +{ + switch (code) { + case LZMA_NO_CHECK: + return _("No integrity check; not verifying file integrity"); + + case LZMA_UNSUPPORTED_CHECK: + return _("Unsupported type of integrity check; " + "not verifying file integrity"); + + case LZMA_MEM_ERROR: + return strerror(ENOMEM); + + case LZMA_MEMLIMIT_ERROR: + return _("Memory usage limit reached"); + + case LZMA_FORMAT_ERROR: + return _("File format not recognized"); + + case LZMA_OPTIONS_ERROR: + return _("Unsupported options"); + + case LZMA_DATA_ERROR: + return _("Compressed data is corrupt"); + + case LZMA_BUF_ERROR: + return _("Unexpected end of input"); + + case LZMA_OK: + case LZMA_STREAM_END: + case LZMA_GET_CHECK: + case LZMA_PROG_ERROR: + case LZMA_SEEK_NEEDED: + case LZMA_RET_INTERNAL1: + case LZMA_RET_INTERNAL2: + case LZMA_RET_INTERNAL3: + case LZMA_RET_INTERNAL4: + case LZMA_RET_INTERNAL5: + case LZMA_RET_INTERNAL6: + case LZMA_RET_INTERNAL7: + case LZMA_RET_INTERNAL8: + // Without "default", compiler will warn if new constants + // are added to lzma_ret, it is not too easy to forget to + // add the new constants to this function. + break; + } + + return _("Internal error (bug)"); +} + + +extern void +message_mem_needed(enum message_verbosity v, uint64_t memusage) +{ + if (v > verbosity) + return; + + // Convert memusage to MiB, rounding up to the next full MiB. + // This way the user can always use the displayed usage as + // the new memory usage limit. (If we rounded to the nearest, + // the user might need to +1 MiB to get high enough limit.) + memusage = round_up_to_mib(memusage); + + uint64_t memlimit = hardware_memlimit_get(opt_mode); + + // Handle the case when there is no memory usage limit. + // This way we don't print a weird message with a huge number. + if (memlimit == UINT64_MAX) { + message(v, _("%s MiB of memory is required. " + "The limiter is disabled."), + uint64_to_str(memusage, 0)); + return; + } + + // With US-ASCII: + // 2^64 with thousand separators + " MiB" suffix + '\0' = 26 + 4 + 1 + // But there may be multibyte chars so reserve enough space. + char memlimitstr[128]; + + // Show the memory usage limit as MiB unless it is less than 1 MiB. + // This way it's easy to notice errors where one has typed + // --memory=123 instead of --memory=123MiB. + if (memlimit < (UINT32_C(1) << 20)) { + snprintf(memlimitstr, sizeof(memlimitstr), "%s B", + uint64_to_str(memlimit, 1)); + } else { + // Round up just like with memusage. If this function is + // called for informational purposes (to just show the + // current usage and limit), we should never show that + // the usage is higher than the limit, which would give + // a false impression that the memory usage limit isn't + // properly enforced. + snprintf(memlimitstr, sizeof(memlimitstr), "%s MiB", + uint64_to_str(round_up_to_mib(memlimit), 1)); + } + + message(v, _("%s MiB of memory is required. The limit is %s."), + uint64_to_str(memusage, 0), memlimitstr); + + return; +} + + +extern void +message_filters_show(enum message_verbosity v, const lzma_filter *filters) +{ + if (v > verbosity) + return; + + char *buf; + const lzma_ret ret = lzma_str_from_filters(&buf, filters, + LZMA_STR_ENCODER | LZMA_STR_GETOPT_LONG, NULL); + if (ret != LZMA_OK) + message_fatal("%s", message_strm(ret)); + + fprintf(stderr, _("%s: Filter chain: %s\n"), progname, buf); + free(buf); + return; +} + + +extern void +message_try_help(void) +{ + // Print this with V_WARNING instead of V_ERROR to prevent it from + // showing up when --quiet has been specified. + message(V_WARNING, _("Try `%s --help' for more information."), + progname); + return; +} + + +extern void +message_version(void) +{ + // It is possible that liblzma version is different than the command + // line tool version, so print both. + if (opt_robot) { + printf("XZ_VERSION=%" PRIu32 "\nLIBLZMA_VERSION=%" PRIu32 "\n", + LZMA_VERSION, lzma_version_number()); + } else { + printf("xz (" PACKAGE_NAME ") " LZMA_VERSION_STRING "\n"); + printf("liblzma %s\n", lzma_version_string()); + } + + tuklib_exit(E_SUCCESS, E_ERROR, verbosity != V_SILENT); +} + + +extern void +message_help(bool long_help) +{ + printf(_("Usage: %s [OPTION]... [FILE]...\n" + "Compress or decompress FILEs in the .xz format.\n\n"), + progname); + + // NOTE: The short help doesn't currently have options that + // take arguments. + if (long_help) + puts(_("Mandatory arguments to long options are mandatory " + "for short options too.\n")); + + if (long_help) + puts(_(" Operation mode:\n")); + + puts(_( +" -z, --compress force compression\n" +" -d, --decompress force decompression\n" +" -t, --test test compressed file integrity\n" +" -l, --list list information about .xz files")); + + if (long_help) + puts(_("\n Operation modifiers:\n")); + + puts(_( +" -k, --keep keep (don't delete) input files\n" +" -f, --force force overwrite of output file and (de)compress links\n" +" -c, --stdout write to standard output and don't delete input files")); + // NOTE: --to-stdout isn't included above because it's not + // the recommended spelling. It was copied from gzip but other + // compressors with gzip-like syntax don't support it. + + if (long_help) { + puts(_( +" --single-stream decompress only the first stream, and silently\n" +" ignore possible remaining input data")); + puts(_( +" --no-sparse do not create sparse files when decompressing\n" +" -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n" +" --files[=FILE] read filenames to process from FILE; if FILE is\n" +" omitted, filenames are read from the standard input;\n" +" filenames must be terminated with the newline character\n" +" --files0[=FILE] like --files but use the null character as terminator")); + } + + if (long_help) { + puts(_("\n Basic file format and compression options:\n")); + puts(_( +" -F, --format=FMT file format to encode or decode; possible values are\n" +" `auto' (default), `xz', `lzma', `lzip', and `raw'\n" +" -C, --check=CHECK integrity check type: `none' (use with caution),\n" +" `crc32', `crc64' (default), or `sha256'")); + puts(_( +" --ignore-check don't verify the integrity check when decompressing")); + } + + puts(_( +" -0 ... -9 compression preset; default is 6; take compressor *and*\n" +" decompressor memory usage into account before using 7-9!")); + + puts(_( +" -e, --extreme try to improve compression ratio by using more CPU time;\n" +" does not affect decompressor memory requirements")); + + puts(_( +" -T, --threads=NUM use at most NUM threads; the default is 1; set to 0\n" +" to use as many threads as there are processor cores")); + + if (long_help) { + puts(_( +" --block-size=SIZE\n" +" start a new .xz block after every SIZE bytes of input;\n" +" use this to set the block size for threaded compression")); + puts(_( +" --block-list=SIZES\n" +" start a new .xz block after the given comma-separated\n" +" intervals of uncompressed data")); + puts(_( +" --flush-timeout=TIMEOUT\n" +" when compressing, if more than TIMEOUT milliseconds has\n" +" passed since the previous flush and reading more input\n" +" would block, all pending data is flushed out" + )); + puts(_( // xgettext:no-c-format +" --memlimit-compress=LIMIT\n" +" --memlimit-decompress=LIMIT\n" +" --memlimit-mt-decompress=LIMIT\n" +" -M, --memlimit=LIMIT\n" +" set memory usage limit for compression, decompression,\n" +" threaded decompression, or all of these; LIMIT is in\n" +" bytes, % of RAM, or 0 for defaults")); + + puts(_( +" --no-adjust if compression settings exceed the memory usage limit,\n" +" give an error instead of adjusting the settings downwards")); + } + + if (long_help) { + puts(_( +"\n Custom filter chain for compression (alternative for using presets):")); + +#if defined(HAVE_ENCODER_LZMA1) || defined(HAVE_DECODER_LZMA1) \ + || defined(HAVE_ENCODER_LZMA2) || defined(HAVE_DECODER_LZMA2) + // TRANSLATORS: The word "literal" in "literal context bits" + // means how many "context bits" to use when encoding + // literals. A literal is a single 8-bit byte. It doesn't + // mean "literally" here. + puts(_( +"\n" +" --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n" +" --lzma2[=OPTS] more of the following options (valid values; default):\n" +" preset=PRE reset options to a preset (0-9[e])\n" +" dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n" +" lc=NUM number of literal context bits (0-4; 3)\n" +" lp=NUM number of literal position bits (0-4; 0)\n" +" pb=NUM number of position bits (0-4; 2)\n" +" mode=MODE compression mode (fast, normal; normal)\n" +" nice=NUM nice length of a match (2-273; 64)\n" +" mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n" +" depth=NUM maximum search depth; 0=automatic (default)")); +#endif + + puts(_( +"\n" +" --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit)\n" +" --arm[=OPTS] ARM BCJ filter\n" +" --armthumb[=OPTS] ARM-Thumb BCJ filter\n" +" --arm64[=OPTS] ARM64 BCJ filter\n" +" --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n" +" --ia64[=OPTS] IA-64 (Itanium) BCJ filter\n" +" --sparc[=OPTS] SPARC BCJ filter\n" +" Valid OPTS for all BCJ filters:\n" +" start=NUM start offset for conversions (default=0)")); + +#if defined(HAVE_ENCODER_DELTA) || defined(HAVE_DECODER_DELTA) + puts(_( +"\n" +" --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n" +" dist=NUM distance between bytes being subtracted\n" +" from each other (1-256; 1)")); +#endif + } + + if (long_help) + puts(_("\n Other options:\n")); + + puts(_( +" -q, --quiet suppress warnings; specify twice to suppress errors too\n" +" -v, --verbose be verbose; specify twice for even more verbose")); + + if (long_help) { + puts(_( +" -Q, --no-warn make warnings not affect the exit status")); + puts(_( +" --robot use machine-parsable messages (useful for scripts)")); + puts(""); + puts(_( +" --info-memory display the total amount of RAM and the currently active\n" +" memory usage limits, and exit")); + puts(_( +" -h, --help display the short help (lists only the basic options)\n" +" -H, --long-help display this long help and exit")); + } else { + puts(_( +" -h, --help display this short help and exit\n" +" -H, --long-help display the long help (lists also the advanced options)")); + } + + puts(_( +" -V, --version display the version number and exit")); + + puts(_("\nWith no FILE, or when FILE is -, read standard input.\n")); + + // TRANSLATORS: This message indicates the bug reporting address + // for this package. Please add _another line_ saying + // "Report translation bugs to <...>\n" with the email or WWW + // address for translation bugs. Thanks. + printf(_("Report bugs to <%s> (in English or Finnish).\n"), + PACKAGE_BUGREPORT); + printf(_("%s home page: <%s>\n"), PACKAGE_NAME, PACKAGE_URL); + +#if LZMA_VERSION_STABILITY != LZMA_VERSION_STABILITY_STABLE + puts(_( +"THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE.")); +#endif + + tuklib_exit(E_SUCCESS, E_ERROR, verbosity != V_SILENT); +} diff --git a/src/xz/message.h b/src/xz/message.h new file mode 100644 index 0000000..b264f82 --- /dev/null +++ b/src/xz/message.h @@ -0,0 +1,152 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file message.h +/// \brief Printing messages to stderr +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// Verbosity levels +enum message_verbosity { + V_SILENT, ///< No messages + V_ERROR, ///< Only error messages + V_WARNING, ///< Errors and warnings + V_VERBOSE, ///< Errors, warnings, and verbose statistics + V_DEBUG, ///< Very verbose +}; + + +/// \brief Signals used for progress message handling +extern const int message_progress_sigs[]; + + +/// \brief Initializes the message functions +/// +/// If an error occurs, this function doesn't return. +/// +extern void message_init(void); + + +/// Increase verbosity level by one step unless it was at maximum. +extern void message_verbosity_increase(void); + +/// Decrease verbosity level by one step unless it was at minimum. +extern void message_verbosity_decrease(void); + +/// Get the current verbosity level. +extern enum message_verbosity message_verbosity_get(void); + + +/// \brief Print a message if verbosity level is at least "verbosity" +/// +/// This doesn't touch the exit status. +extern void message(enum message_verbosity verbosity, const char *fmt, ...) + lzma_attribute((__format__(__printf__, 2, 3))); + + +/// \brief Prints a warning and possibly sets exit status +/// +/// The message is printed only if verbosity level is at least V_WARNING. +/// The exit status is set to WARNING unless it was already at ERROR. +extern void message_warning(const char *fmt, ...) + lzma_attribute((__format__(__printf__, 1, 2))); + + +/// \brief Prints an error message and sets exit status +/// +/// The message is printed only if verbosity level is at least V_ERROR. +/// The exit status is set to ERROR. +extern void message_error(const char *fmt, ...) + lzma_attribute((__format__(__printf__, 1, 2))); + + +/// \brief Prints an error message and exits with EXIT_ERROR +/// +/// The message is printed only if verbosity level is at least V_ERROR. +extern void message_fatal(const char *fmt, ...) + lzma_attribute((__format__(__printf__, 1, 2))) + lzma_attribute((__noreturn__)); + + +/// Print an error message that an internal error occurred and exit with +/// EXIT_ERROR. +extern void message_bug(void) lzma_attribute((__noreturn__)); + + +/// Print a message that establishing signal handlers failed, and exit with +/// exit status ERROR. +extern void message_signal_handler(void) lzma_attribute((__noreturn__)); + + +/// Convert lzma_ret to a string. +extern const char *message_strm(lzma_ret code); + + +/// Display how much memory was needed and how much the limit was. +extern void message_mem_needed(enum message_verbosity v, uint64_t memusage); + + +/// Print the filter chain. +extern void message_filters_show( + enum message_verbosity v, const lzma_filter *filters); + + +/// Print a message that user should try --help. +extern void message_try_help(void); + + +/// Prints the version number to stdout and exits with exit status SUCCESS. +extern void message_version(void) lzma_attribute((__noreturn__)); + + +/// Print the help message. +extern void message_help(bool long_help) lzma_attribute((__noreturn__)); + + +/// \brief Set the total number of files to be processed +/// +/// Standard input is counted as a file here. This is used when printing +/// the filename via message_filename(). +extern void message_set_files(unsigned int files); + + +/// \brief Set the name of the current file and possibly print it too +/// +/// The name is printed immediately if --list was used or if --verbose +/// was used and stderr is a terminal. Even when the filename isn't printed, +/// it is stored so that it can be printed later if needed for progress +/// messages. +extern void message_filename(const char *src_name); + + +/// \brief Start progress info handling +/// +/// message_filename() must be called before this function to set +/// the filename. +/// +/// This must be paired with a call to message_progress_end() before the +/// given *strm becomes invalid. +/// +/// \param strm Pointer to lzma_stream used for the coding. +/// \param in_size Size of the input file, or zero if unknown. +/// +extern void message_progress_start(lzma_stream *strm, + bool is_passthru, uint64_t in_size); + + +/// Update the progress info if in verbose mode and enough time has passed +/// since the previous update. This can be called only when +/// message_progress_start() has already been used. +extern void message_progress_update(void); + + +/// \brief Finishes the progress message if we were in verbose mode +/// +/// \param finished True if the whole stream was successfully coded +/// and output written to the output stream. +/// +extern void message_progress_end(bool finished); diff --git a/src/xz/mytime.c b/src/xz/mytime.c new file mode 100644 index 0000000..7e8a074 --- /dev/null +++ b/src/xz/mytime.c @@ -0,0 +1,86 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file mytime.c +/// \brief Time handling functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + +#if defined(HAVE_CLOCK_GETTIME) && defined(HAVE_CLOCK_MONOTONIC) +# include +#else +# include +#endif + +uint64_t opt_flush_timeout = 0; + +static uint64_t start_time; +static uint64_t next_flush; + + +/// \brief Get the current time as milliseconds +/// +/// It's relative to some point but not necessarily to the UNIX Epoch. +static uint64_t +mytime_now(void) +{ +#if defined(HAVE_CLOCK_GETTIME) && defined(HAVE_CLOCK_MONOTONIC) + // If CLOCK_MONOTONIC was available at compile time but for some + // reason isn't at runtime, fallback to CLOCK_REALTIME which + // according to POSIX is mandatory for all implementations. + static clockid_t clk_id = CLOCK_MONOTONIC; + struct timespec tv; + while (clock_gettime(clk_id, &tv)) + clk_id = CLOCK_REALTIME; + + return (uint64_t)tv.tv_sec * 1000 + (uint64_t)(tv.tv_nsec / 1000000); +#else + struct timeval tv; + gettimeofday(&tv, NULL); + return (uint64_t)tv.tv_sec * 1000 + (uint64_t)(tv.tv_usec / 1000); +#endif +} + + +extern void +mytime_set_start_time(void) +{ + start_time = mytime_now(); + return; +} + + +extern uint64_t +mytime_get_elapsed(void) +{ + return mytime_now() - start_time; +} + + +extern void +mytime_set_flush_time(void) +{ + next_flush = mytime_now() + opt_flush_timeout; + return; +} + + +extern int +mytime_get_flush_timeout(void) +{ + if (opt_flush_timeout == 0 || opt_mode != MODE_COMPRESS) + return -1; + + const uint64_t now = mytime_now(); + if (now >= next_flush) + return 0; + + const uint64_t remaining = next_flush - now; + return remaining > INT_MAX ? INT_MAX : (int)remaining; +} diff --git a/src/xz/mytime.h b/src/xz/mytime.h new file mode 100644 index 0000000..a7be2aa --- /dev/null +++ b/src/xz/mytime.h @@ -0,0 +1,43 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file mytime.h +/// \brief Time handling functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + + +/// \brief Number of milliseconds to between LZMA_SYNC_FLUSHes +/// +/// If 0, timed flushing is disabled. Otherwise if no more input is available +/// and not at the end of the file and at least opt_flush_timeout milliseconds +/// has elapsed since the start of compression or the previous flushing +/// (LZMA_SYNC_FLUSH or LZMA_FULL_FLUSH), set LZMA_SYNC_FLUSH to flush +/// the pending data. +extern uint64_t opt_flush_timeout; + + +/// \brief Store the time when (de)compression was started +/// +/// The start time is also stored as the time of the first flush. +extern void mytime_set_start_time(void); + + +/// \brief Get the number of milliseconds since the operation started +extern uint64_t mytime_get_elapsed(void); + + +/// \brief Store the time of when compressor was flushed +extern void mytime_set_flush_time(void); + + +/// \brief Get the number of milliseconds until the next flush +/// +/// This returns -1 if no timed flushing is used. +/// +/// The return value is intended for use with poll(). +extern int mytime_get_flush_timeout(void); diff --git a/src/xz/options.c b/src/xz/options.c new file mode 100644 index 0000000..b434b0c --- /dev/null +++ b/src/xz/options.c @@ -0,0 +1,358 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file options.c +/// \brief Parser for filter-specific options +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + + +/////////////////// +// Generic stuff // +/////////////////// + +typedef struct { + const char *name; + uint64_t id; +} name_id_map; + + +typedef struct { + const char *name; + const name_id_map *map; + uint64_t min; + uint64_t max; +} option_map; + + +/// Parses option=value pairs that are separated with commas: +/// opt=val,opt=val,opt=val +/// +/// Each option is a string, that is converted to an integer using the +/// index where the option string is in the array. +/// +/// Value can be +/// - a string-id map mapping a list of possible string values to integers +/// (opts[i].map != NULL, opts[i].min and opts[i].max are ignored); +/// - a number with minimum and maximum value limit +/// (opts[i].map == NULL && opts[i].min != UINT64_MAX); +/// - a string that will be parsed by the filter-specific code +/// (opts[i].map == NULL && opts[i].min == UINT64_MAX, opts[i].max ignored) +/// +/// When parsing both option and value succeed, a filter-specific function +/// is called, which should update the given value to filter-specific +/// options structure. +/// +/// \param str String containing the options from the command line +/// \param opts Filter-specific option map +/// \param set Filter-specific function to update filter_options +/// \param filter_options Pointer to filter-specific options structure +/// +/// \return Returns only if no errors occur. +/// +static void +parse_options(const char *str, const option_map *opts, + void (*set)(void *filter_options, + unsigned key, uint64_t value, const char *valuestr), + void *filter_options) +{ + if (str == NULL || str[0] == '\0') + return; + + char *s = xstrdup(str); + char *name = s; + + while (*name != '\0') { + if (*name == ',') { + ++name; + continue; + } + + char *split = strchr(name, ','); + if (split != NULL) + *split = '\0'; + + char *value = strchr(name, '='); + if (value != NULL) + *value++ = '\0'; + + if (value == NULL || value[0] == '\0') + message_fatal(_("%s: Options must be `name=value' " + "pairs separated with commas"), str); + + // Look for the option name from the option map. + unsigned i = 0; + while (true) { + if (opts[i].name == NULL) + message_fatal(_("%s: Invalid option name"), + name); + + if (strcmp(name, opts[i].name) == 0) + break; + + ++i; + } + + // Option was found from the map. See how we should handle it. + if (opts[i].map != NULL) { + // value is a string which we should map + // to an integer. + unsigned j; + for (j = 0; opts[i].map[j].name != NULL; ++j) { + if (strcmp(opts[i].map[j].name, value) == 0) + break; + } + + if (opts[i].map[j].name == NULL) + message_fatal(_("%s: Invalid option value"), + value); + + set(filter_options, i, opts[i].map[j].id, value); + + } else if (opts[i].min == UINT64_MAX) { + // value is a special string that will be + // parsed by set(). + set(filter_options, i, 0, value); + + } else { + // value is an integer. + const uint64_t v = str_to_uint64(name, value, + opts[i].min, opts[i].max); + set(filter_options, i, v, value); + } + + // Check if it was the last option. + if (split == NULL) + break; + + name = split + 1; + } + + free(s); + return; +} + + +/////////// +// Delta // +/////////// + +enum { + OPT_DIST, +}; + + +static void +set_delta(void *options, unsigned key, uint64_t value, + const char *valuestr lzma_attribute((__unused__))) +{ + lzma_options_delta *opt = options; + switch (key) { + case OPT_DIST: + opt->dist = value; + break; + } +} + + +extern lzma_options_delta * +options_delta(const char *str) +{ + static const option_map opts[] = { + { "dist", NULL, LZMA_DELTA_DIST_MIN, + LZMA_DELTA_DIST_MAX }, + { NULL, NULL, 0, 0 } + }; + + lzma_options_delta *options = xmalloc(sizeof(lzma_options_delta)); + *options = (lzma_options_delta){ + // It's hard to give a useful default for this. + .type = LZMA_DELTA_TYPE_BYTE, + .dist = LZMA_DELTA_DIST_MIN, + }; + + parse_options(str, opts, &set_delta, options); + + return options; +} + + +///////// +// BCJ // +///////// + +enum { + OPT_START_OFFSET, +}; + + +static void +set_bcj(void *options, unsigned key, uint64_t value, + const char *valuestr lzma_attribute((__unused__))) +{ + lzma_options_bcj *opt = options; + switch (key) { + case OPT_START_OFFSET: + opt->start_offset = value; + break; + } +} + + +extern lzma_options_bcj * +options_bcj(const char *str) +{ + static const option_map opts[] = { + { "start", NULL, 0, UINT32_MAX }, + { NULL, NULL, 0, 0 } + }; + + lzma_options_bcj *options = xmalloc(sizeof(lzma_options_bcj)); + *options = (lzma_options_bcj){ + .start_offset = 0, + }; + + parse_options(str, opts, &set_bcj, options); + + return options; +} + + +////////// +// LZMA // +////////// + +enum { + OPT_PRESET, + OPT_DICT, + OPT_LC, + OPT_LP, + OPT_PB, + OPT_MODE, + OPT_NICE, + OPT_MF, + OPT_DEPTH, +}; + + +static void lzma_attribute((__noreturn__)) +error_lzma_preset(const char *valuestr) +{ + message_fatal(_("Unsupported LZMA1/LZMA2 preset: %s"), valuestr); +} + + +static void +set_lzma(void *options, unsigned key, uint64_t value, const char *valuestr) +{ + lzma_options_lzma *opt = options; + + switch (key) { + case OPT_PRESET: { + if (valuestr[0] < '0' || valuestr[0] > '9') + error_lzma_preset(valuestr); + + uint32_t preset = (uint32_t)(valuestr[0] - '0'); + + // Currently only "e" is supported as a modifier, + // so keep this simple for now. + if (valuestr[1] != '\0') { + if (valuestr[1] == 'e') + preset |= LZMA_PRESET_EXTREME; + else + error_lzma_preset(valuestr); + + if (valuestr[2] != '\0') + error_lzma_preset(valuestr); + } + + if (lzma_lzma_preset(options, preset)) + error_lzma_preset(valuestr); + + break; + } + + case OPT_DICT: + opt->dict_size = value; + break; + + case OPT_LC: + opt->lc = value; + break; + + case OPT_LP: + opt->lp = value; + break; + + case OPT_PB: + opt->pb = value; + break; + + case OPT_MODE: + opt->mode = value; + break; + + case OPT_NICE: + opt->nice_len = value; + break; + + case OPT_MF: + opt->mf = value; + break; + + case OPT_DEPTH: + opt->depth = value; + break; + } +} + + +extern lzma_options_lzma * +options_lzma(const char *str) +{ + static const name_id_map modes[] = { + { "fast", LZMA_MODE_FAST }, + { "normal", LZMA_MODE_NORMAL }, + { NULL, 0 } + }; + + static const name_id_map mfs[] = { + { "hc3", LZMA_MF_HC3 }, + { "hc4", LZMA_MF_HC4 }, + { "bt2", LZMA_MF_BT2 }, + { "bt3", LZMA_MF_BT3 }, + { "bt4", LZMA_MF_BT4 }, + { NULL, 0 } + }; + + static const option_map opts[] = { + { "preset", NULL, UINT64_MAX, 0 }, + { "dict", NULL, LZMA_DICT_SIZE_MIN, + (UINT32_C(1) << 30) + (UINT32_C(1) << 29) }, + { "lc", NULL, LZMA_LCLP_MIN, LZMA_LCLP_MAX }, + { "lp", NULL, LZMA_LCLP_MIN, LZMA_LCLP_MAX }, + { "pb", NULL, LZMA_PB_MIN, LZMA_PB_MAX }, + { "mode", modes, 0, 0 }, + { "nice", NULL, 2, 273 }, + { "mf", mfs, 0, 0 }, + { "depth", NULL, 0, UINT32_MAX }, + { NULL, NULL, 0, 0 } + }; + + lzma_options_lzma *options = xmalloc(sizeof(lzma_options_lzma)); + if (lzma_lzma_preset(options, LZMA_PRESET_DEFAULT)) + message_bug(); + + parse_options(str, opts, &set_lzma, options); + + if (options->lc + options->lp > LZMA_LCLP_MAX) + message_fatal(_("The sum of lc and lp must not exceed 4")); + + return options; +} diff --git a/src/xz/options.h b/src/xz/options.h new file mode 100644 index 0000000..61ec8d5 --- /dev/null +++ b/src/xz/options.h @@ -0,0 +1,31 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file options.h +/// \brief Parser for filter-specific options +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// \brief Parser for Delta options +/// +/// \return Pointer to allocated options structure. +/// Doesn't return on error. +extern lzma_options_delta *options_delta(const char *str); + + +/// \brief Parser for BCJ options +/// +/// \return Pointer to allocated options structure. +/// Doesn't return on error. +extern lzma_options_bcj *options_bcj(const char *str); + + +/// \brief Parser for LZMA options +/// +/// \return Pointer to allocated options structure. +/// Doesn't return on error. +extern lzma_options_lzma *options_lzma(const char *str); diff --git a/src/xz/private.h b/src/xz/private.h new file mode 100644 index 0000000..6414bdb --- /dev/null +++ b/src/xz/private.h @@ -0,0 +1,66 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file private.h +/// \brief Common includes, definitions, and prototypes +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "sysdefs.h" +#include "mythread.h" + +#include "lzma.h" + +#include +#include +#include +#include +#include +#include +#include + +#include "tuklib_gettext.h" +#include "tuklib_progname.h" +#include "tuklib_exit.h" +#include "tuklib_mbstr.h" + +#if defined(_WIN32) && !defined(__CYGWIN__) +# define WIN32_LEAN_AND_MEAN +# include +#endif + +#ifndef STDIN_FILENO +# define STDIN_FILENO (fileno(stdin)) +#endif + +#ifndef STDOUT_FILENO +# define STDOUT_FILENO (fileno(stdout)) +#endif + +#ifndef STDERR_FILENO +# define STDERR_FILENO (fileno(stderr)) +#endif + +#if defined(HAVE_CAPSICUM) || defined(HAVE_PLEDGE) +# define ENABLE_SANDBOX 1 +#endif + +#include "main.h" +#include "mytime.h" +#include "coder.h" +#include "message.h" +#include "args.h" +#include "hardware.h" +#include "file_io.h" +#include "options.h" +#include "signals.h" +#include "suffix.h" +#include "util.h" + +#ifdef HAVE_DECODERS +# include "list.h" +#endif diff --git a/src/xz/signals.c b/src/xz/signals.c new file mode 100644 index 0000000..7aef463 --- /dev/null +++ b/src/xz/signals.c @@ -0,0 +1,209 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file signals.c +/// \brief Handling signals to abort operation +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + + +volatile sig_atomic_t user_abort = false; + + +#if !(defined(_WIN32) && !defined(__CYGWIN__)) + +/// If we were interrupted by a signal, we store the signal number so that +/// we can raise that signal to kill the program when all cleanups have +/// been done. +static volatile sig_atomic_t exit_signal = 0; + +/// Mask of signals for which we have established a signal handler to set +/// user_abort to true. +static sigset_t hooked_signals; + +/// True once signals_init() has finished. This is used to skip blocking +/// signals (with uninitialized hooked_signals) if signals_block() and +/// signals_unblock() are called before signals_init() has been called. +static bool signals_are_initialized = false; + +/// signals_block() and signals_unblock() can be called recursively. +static size_t signals_block_count = 0; + + +static void +signal_handler(int sig) +{ + exit_signal = sig; + user_abort = true; + +#ifndef TUKLIB_DOSLIKE + io_write_to_user_abort_pipe(); +#endif + + return; +} + + +extern void +signals_init(void) +{ + // List of signals for which we establish the signal handler. + static const int sigs[] = { + SIGINT, + SIGTERM, +#ifdef SIGHUP + SIGHUP, +#endif +#ifdef SIGPIPE + SIGPIPE, +#endif +#ifdef SIGXCPU + SIGXCPU, +#endif +#ifdef SIGXFSZ + SIGXFSZ, +#endif + }; + + // Mask of the signals for which we have established a signal handler. + sigemptyset(&hooked_signals); + for (size_t i = 0; i < ARRAY_SIZE(sigs); ++i) + sigaddset(&hooked_signals, sigs[i]); + +#ifdef SIGALRM + // Add also the signals from message.c to hooked_signals. + for (size_t i = 0; message_progress_sigs[i] != 0; ++i) + sigaddset(&hooked_signals, message_progress_sigs[i]); +#endif + + // Using "my_sa" because "sa" may conflict with a sockaddr variable + // from system headers on Solaris. + struct sigaction my_sa; + + // All the signals that we handle we also blocked while the signal + // handler runs. + my_sa.sa_mask = hooked_signals; + + // Don't set SA_RESTART, because we want EINTR so that we can check + // for user_abort and cleanup before exiting. We block the signals + // for which we have established a handler when we don't want EINTR. + my_sa.sa_flags = 0; + my_sa.sa_handler = &signal_handler; + + for (size_t i = 0; i < ARRAY_SIZE(sigs); ++i) { + // If the parent process has left some signals ignored, + // we don't unignore them. + struct sigaction old; + if (sigaction(sigs[i], NULL, &old) == 0 + && old.sa_handler == SIG_IGN) + continue; + + // Establish the signal handler. + if (sigaction(sigs[i], &my_sa, NULL)) + message_signal_handler(); + } + + signals_are_initialized = true; + + return; +} + + +#ifndef __VMS +extern void +signals_block(void) +{ + if (signals_are_initialized) { + if (signals_block_count++ == 0) { + const int saved_errno = errno; + mythread_sigmask(SIG_BLOCK, &hooked_signals, NULL); + errno = saved_errno; + } + } + + return; +} + + +extern void +signals_unblock(void) +{ + if (signals_are_initialized) { + assert(signals_block_count > 0); + + if (--signals_block_count == 0) { + const int saved_errno = errno; + mythread_sigmask(SIG_UNBLOCK, &hooked_signals, NULL); + errno = saved_errno; + } + } + + return; +} +#endif + + +extern void +signals_exit(void) +{ + const int sig = (int)exit_signal; + + if (sig != 0) { +#if defined(TUKLIB_DOSLIKE) || defined(__VMS) + // Don't raise(), set only exit status. This avoids + // printing unwanted message about SIGINT when the user + // presses C-c. + set_exit_status(E_ERROR); +#else + struct sigaction sa; + sa.sa_handler = SIG_DFL; + sigfillset(&sa.sa_mask); + sa.sa_flags = 0; + sigaction(sig, &sa, NULL); + raise(sig); +#endif + } + + return; +} + +#else + +// While Windows has some very basic signal handling functions as required +// by C89, they are not really used, and e.g. SIGINT doesn't work exactly +// the way it does on POSIX (Windows creates a new thread for the signal +// handler). Instead, we use SetConsoleCtrlHandler() to catch user +// pressing C-c, because that seems to be the recommended way to do it. +// +// NOTE: This doesn't work under MSYS. Trying with SIGINT doesn't work +// either even if it appeared to work at first. So test using Windows +// console window. + +static BOOL WINAPI +signal_handler(DWORD type lzma_attribute((__unused__))) +{ + // Since we don't get a signal number which we could raise() at + // signals_exit() like on POSIX, just set the exit status to + // indicate an error, so that we cannot return with zero exit status. + set_exit_status(E_ERROR); + user_abort = true; + return TRUE; +} + + +extern void +signals_init(void) +{ + if (!SetConsoleCtrlHandler(&signal_handler, TRUE)) + message_signal_handler(); + + return; +} + +#endif diff --git a/src/xz/signals.h b/src/xz/signals.h new file mode 100644 index 0000000..5b125e0 --- /dev/null +++ b/src/xz/signals.h @@ -0,0 +1,43 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file signals.h +/// \brief Handling signals to abort operation +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// If this is true, we will clean up the possibly incomplete output file, +/// return to main() as soon as practical. That is, the code needs to poll +/// this variable in various places. +extern volatile sig_atomic_t user_abort; + + +/// Initialize the signal handler, which will set user_abort to true when +/// user e.g. presses C-c. +extern void signals_init(void); + + +#if (defined(_WIN32) && !defined(__CYGWIN__)) || defined(__VMS) +# define signals_block() do { } while (0) +# define signals_unblock() do { } while (0) +#else +/// Block the signals which don't have SA_RESTART and which would just set +/// user_abort to true. This is handy when we don't want to handle EINTR +/// and don't want SA_RESTART either. +extern void signals_block(void); + +/// Unblock the signals blocked by signals_block(). +extern void signals_unblock(void); +#endif + +#if defined(_WIN32) && !defined(__CYGWIN__) +# define signals_exit() do { } while (0) +#else +/// If user has sent us a signal earlier to terminate the process, +/// re-raise that signal to actually terminate the process. +extern void signals_exit(void); +#endif diff --git a/src/xz/suffix.c b/src/xz/suffix.c new file mode 100644 index 0000000..09add38 --- /dev/null +++ b/src/xz/suffix.c @@ -0,0 +1,411 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file suffix.c +/// \brief Checks filename suffix and creates the destination filename +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" + +#ifdef __DJGPP__ +# include +#endif + +// For case-insensitive filename suffix on case-insensitive systems +#if defined(TUKLIB_DOSLIKE) || defined(__VMS) +# ifdef HAVE_STRINGS_H +# include +# endif +# define strcmp strcasecmp +#endif + + +static char *custom_suffix = NULL; + + +/// \brief Test if the char is a directory separator +static bool +is_dir_sep(char c) +{ +#ifdef TUKLIB_DOSLIKE + return c == '/' || c == '\\' || c == ':'; +#else + return c == '/'; +#endif +} + + +/// \brief Test if the string contains a directory separator +static bool +has_dir_sep(const char *str) +{ +#ifdef TUKLIB_DOSLIKE + return strpbrk(str, "/\\:") != NULL; +#else + return strchr(str, '/') != NULL; +#endif +} + + +#ifdef __DJGPP__ +/// \brief Test for special suffix used for 8.3 short filenames (SFN) +/// +/// \return If str matches *.?- or *.??-, true is returned. Otherwise +/// false is returned. +static bool +has_sfn_suffix(const char *str, size_t len) +{ + if (len >= 4 && str[len - 1] == '-' && str[len - 2] != '.' + && !is_dir_sep(str[len - 2])) { + // *.?- + if (str[len - 3] == '.') + return !is_dir_sep(str[len - 4]); + + // *.??- + if (len >= 5 && !is_dir_sep(str[len - 3]) + && str[len - 4] == '.') + return !is_dir_sep(str[len - 5]); + } + + return false; +} +#endif + + +/// \brief Checks if src_name has given compressed_suffix +/// +/// \param suffix Filename suffix to look for +/// \param src_name Input filename +/// \param src_len strlen(src_name) +/// +/// \return If src_name has the suffix, src_len - strlen(suffix) is +/// returned. It's always a positive integer. Otherwise zero +/// is returned. +static size_t +test_suffix(const char *suffix, const char *src_name, size_t src_len) +{ + const size_t suffix_len = strlen(suffix); + + // The filename must have at least one character in addition to + // the suffix. src_name may contain path to the filename, so we + // need to check for directory separator too. + if (src_len <= suffix_len + || is_dir_sep(src_name[src_len - suffix_len - 1])) + return 0; + + if (strcmp(suffix, src_name + src_len - suffix_len) == 0) + return src_len - suffix_len; + + return 0; +} + + +/// \brief Removes the filename suffix of the compressed file +/// +/// \return Name of the uncompressed file, or NULL if file has unknown +/// suffix. +static char * +uncompressed_name(const char *src_name, const size_t src_len) +{ + static const struct { + const char *compressed; + const char *uncompressed; + } suffixes[] = { + { ".xz", "" }, + { ".txz", ".tar" }, // .txz abbreviation for .txt.gz is rare. + { ".lzma", "" }, +#ifdef __DJGPP__ + { ".lzm", "" }, +#endif + { ".tlz", ".tar" }, // Both .tar.lzma and .tar.lz +#ifdef HAVE_LZIP_DECODER + { ".lz", "" }, +#endif + }; + + const char *new_suffix = ""; + size_t new_len = 0; + + if (opt_format == FORMAT_RAW) { + // Don't check for known suffixes when --format=raw was used. + if (custom_suffix == NULL) { + message_error(_("%s: With --format=raw, " + "--suffix=.SUF is required unless " + "writing to stdout"), src_name); + return NULL; + } + } else { + for (size_t i = 0; i < ARRAY_SIZE(suffixes); ++i) { + new_len = test_suffix(suffixes[i].compressed, + src_name, src_len); + if (new_len != 0) { + new_suffix = suffixes[i].uncompressed; + break; + } + } + +#ifdef __DJGPP__ + // Support also *.?- -> *.? and *.??- -> *.?? on DOS. + // This is done also when long filenames are available + // to keep it easy to decompress files created when + // long filename support wasn't available. + if (new_len == 0 && has_sfn_suffix(src_name, src_len)) { + new_suffix = ""; + new_len = src_len - 1; + } +#endif + } + + if (new_len == 0 && custom_suffix != NULL) + new_len = test_suffix(custom_suffix, src_name, src_len); + + if (new_len == 0) { + message_warning(_("%s: Filename has an unknown suffix, " + "skipping"), src_name); + return NULL; + } + + const size_t new_suffix_len = strlen(new_suffix); + char *dest_name = xmalloc(new_len + new_suffix_len + 1); + + memcpy(dest_name, src_name, new_len); + memcpy(dest_name + new_len, new_suffix, new_suffix_len); + dest_name[new_len + new_suffix_len] = '\0'; + + return dest_name; +} + + +/// This message is needed in multiple places in compressed_name(), +/// so the message has been put into its own function. +static void +msg_suffix(const char *src_name, const char *suffix) +{ + message_warning(_("%s: File already has `%s' suffix, skipping"), + src_name, suffix); + return; +} + + +/// \brief Appends suffix to src_name +/// +/// In contrast to uncompressed_name(), we check only suffixes that are valid +/// for the specified file format. +static char * +compressed_name(const char *src_name, size_t src_len) +{ + // The order of these must match the order in args.h. + static const char *const all_suffixes[][4] = { + { + ".xz", + ".txz", + NULL + }, { + ".lzma", +#ifdef __DJGPP__ + ".lzm", +#endif + ".tlz", + NULL +#ifdef HAVE_LZIP_DECODER + // This is needed to keep the table indexing in sync with + // enum format_type from coder.h. + }, { +/* + ".lz", +*/ + NULL +#endif + }, { + // --format=raw requires specifying the suffix + // manually or using stdout. + NULL + } + }; + + // args.c ensures these. + assert(opt_format != FORMAT_AUTO); +#ifdef HAVE_LZIP_DECODER + assert(opt_format != FORMAT_LZIP); +#endif + + const size_t format = opt_format - 1; + const char *const *suffixes = all_suffixes[format]; + + // Look for known filename suffixes and refuse to compress them. + for (size_t i = 0; suffixes[i] != NULL; ++i) { + if (test_suffix(suffixes[i], src_name, src_len) != 0) { + msg_suffix(src_name, suffixes[i]); + return NULL; + } + } + +#ifdef __DJGPP__ + // Recognize also the special suffix that is used when long + // filename (LFN) support isn't available. This suffix is + // recognized on LFN systems too. + if (opt_format == FORMAT_XZ && has_sfn_suffix(src_name, src_len)) { + msg_suffix(src_name, "-"); + return NULL; + } +#endif + + if (custom_suffix != NULL) { + if (test_suffix(custom_suffix, src_name, src_len) != 0) { + msg_suffix(src_name, custom_suffix); + return NULL; + } + } + + // TODO: Hmm, maybe it would be better to validate this in args.c, + // since the suffix handling when decoding is weird now. + if (opt_format == FORMAT_RAW && custom_suffix == NULL) { + message_error(_("%s: With --format=raw, " + "--suffix=.SUF is required unless " + "writing to stdout"), src_name); + return NULL; + } + + const char *suffix = custom_suffix != NULL + ? custom_suffix : suffixes[0]; + size_t suffix_len = strlen(suffix); + +#ifdef __DJGPP__ + if (!_use_lfn(src_name)) { + // Long filename (LFN) support isn't available and we are + // limited to 8.3 short filenames (SFN). + // + // Look for suffix separator from the filename, and make sure + // that it is in the filename, not in a directory name. + const char *sufsep = strrchr(src_name, '.'); + if (sufsep == NULL || sufsep[1] == '\0' + || has_dir_sep(sufsep)) { + // src_name has no filename extension. + // + // Examples: + // xz foo -> foo.xz + // xz -F lzma foo -> foo.lzm + // xz -S x foo -> foox + // xz -S x foo. -> foo.x + // xz -S x.y foo -> foox.y + // xz -S .x foo -> foo.x + // xz -S .x foo. -> foo.x + // + // Avoid double dots: + if (sufsep != NULL && sufsep[1] == '\0' + && suffix[0] == '.') + --src_len; + + } else if (custom_suffix == NULL + && strcasecmp(sufsep, ".tar") == 0) { + // ".tar" is handled specially. + // + // Examples: + // xz foo.tar -> foo.txz + // xz -F lzma foo.tar -> foo.tlz + static const char *const tar_suffixes[] = { + ".txz", // .tar.xz + ".tlz", // .tar.lzma +/* + ".tlz", // .tar.lz +*/ + }; + suffix = tar_suffixes[format]; + suffix_len = 4; + src_len -= 4; + + } else { + if (custom_suffix == NULL && opt_format == FORMAT_XZ) { + // Instead of the .xz suffix, use a single + // character at the end of the filename + // extension. This is to minimize name + // conflicts when compressing multiple files + // with the same basename. E.g. foo.txt and + // foo.exe become foo.tx- and foo.ex-. Dash + // is rare as the last character of the + // filename extension, so it seems to be + // quite safe choice and it stands out better + // in directory listings than e.g. x. For + // comparison, gzip uses z. + suffix = "-"; + suffix_len = 1; + } + + if (suffix[0] == '.') { + // The first character of the suffix is a dot. + // Throw away the original filename extension + // and replace it with the new suffix. + // + // Examples: + // xz -F lzma foo.txt -> foo.lzm + // xz -S .x foo.txt -> foo.x + src_len = sufsep - src_name; + + } else { + // The first character of the suffix is not + // a dot. Preserve the first 0-2 characters + // of the original filename extension. + // + // Examples: + // xz foo.txt -> foo.tx- + // xz -S x foo.c -> foo.cx + // xz -S ab foo.c -> foo.cab + // xz -S ab foo.txt -> foo.tab + // xz -S abc foo.txt -> foo.abc + // + // Truncate the suffix to three chars: + if (suffix_len > 3) + suffix_len = 3; + + // If needed, overwrite 1-3 characters. + if (strlen(sufsep) > 4 - suffix_len) + src_len = sufsep - src_name + + 4 - suffix_len; + } + } + } +#endif + + char *dest_name = xmalloc(src_len + suffix_len + 1); + + memcpy(dest_name, src_name, src_len); + memcpy(dest_name + src_len, suffix, suffix_len); + dest_name[src_len + suffix_len] = '\0'; + + return dest_name; +} + + +extern char * +suffix_get_dest_name(const char *src_name) +{ + assert(src_name != NULL); + + // Length of the name is needed in all cases to locate the end of + // the string to compare the suffix, so calculate the length here. + const size_t src_len = strlen(src_name); + + return opt_mode == MODE_COMPRESS + ? compressed_name(src_name, src_len) + : uncompressed_name(src_name, src_len); +} + + +extern void +suffix_set(const char *suffix) +{ + // Empty suffix and suffixes having a directory separator are + // rejected. Such suffixes would break things later. + if (suffix[0] == '\0' || has_dir_sep(suffix)) + message_fatal(_("%s: Invalid filename suffix"), suffix); + + // Replace the old custom_suffix (if any) with the new suffix. + free(custom_suffix); + custom_suffix = xstrdup(suffix); + return; +} diff --git a/src/xz/suffix.h b/src/xz/suffix.h new file mode 100644 index 0000000..5537d73 --- /dev/null +++ b/src/xz/suffix.h @@ -0,0 +1,28 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file suffix.h +/// \brief Checks filename suffix and creates the destination filename +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// \brief Get the name of the destination file +/// +/// Depending on the global variable opt_mode, this tries to find a matching +/// counterpart for src_name. If the name can be constructed, it is allocated +/// and returned (caller must free it). On error, a message is printed and +/// NULL is returned. +extern char *suffix_get_dest_name(const char *src_name); + + +/// \brief Set a custom filename suffix +/// +/// This function calls xstrdup() for the given suffix, thus the caller +/// doesn't need to keep the memory allocated. There can be only one custom +/// suffix, thus if this is called multiple times, the old suffixes are freed +/// and forgotten. +extern void suffix_set(const char *suffix); diff --git a/src/xz/util.c b/src/xz/util.c new file mode 100644 index 0000000..9f9a8fb --- /dev/null +++ b/src/xz/util.c @@ -0,0 +1,286 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file util.c +/// \brief Miscellaneous utility functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "private.h" +#include + + +/// Buffers for uint64_to_str() and uint64_to_nicestr() +static char bufs[4][128]; + +/// Thousand separator support in uint64_to_str() and uint64_to_nicestr() +static enum { UNKNOWN, WORKS, BROKEN } thousand = UNKNOWN; + + +extern void * +xrealloc(void *ptr, size_t size) +{ + assert(size > 0); + + // Save ptr so that we can free it if realloc fails. + // The point is that message_fatal ends up calling stdio functions + // which in some libc implementations might allocate memory from + // the heap. Freeing ptr improves the chances that there's free + // memory for stdio functions if they need it. + void *p = ptr; + ptr = realloc(ptr, size); + + if (ptr == NULL) { + const int saved_errno = errno; + free(p); + message_fatal("%s", strerror(saved_errno)); + } + + return ptr; +} + + +extern char * +xstrdup(const char *src) +{ + assert(src != NULL); + const size_t size = strlen(src) + 1; + char *dest = xmalloc(size); + return memcpy(dest, src, size); +} + + +extern uint64_t +str_to_uint64(const char *name, const char *value, uint64_t min, uint64_t max) +{ + uint64_t result = 0; + + // Skip blanks. + while (*value == ' ' || *value == '\t') + ++value; + + // Accept special value "max". Supporting "min" doesn't seem useful. + if (strcmp(value, "max") == 0) + return max; + + if (*value < '0' || *value > '9') + message_fatal(_("%s: Value is not a non-negative " + "decimal integer"), value); + + do { + // Don't overflow. + if (result > UINT64_MAX / 10) + goto error; + + result *= 10; + + // Another overflow check + const uint32_t add = (uint32_t)(*value - '0'); + if (UINT64_MAX - add < result) + goto error; + + result += add; + ++value; + } while (*value >= '0' && *value <= '9'); + + if (*value != '\0') { + // Look for suffix. Originally this supported both base-2 + // and base-10, but since there seems to be little need + // for base-10 in this program, treat everything as base-2 + // and also be more relaxed about the case of the first + // letter of the suffix. + uint64_t multiplier = 0; + if (*value == 'k' || *value == 'K') + multiplier = UINT64_C(1) << 10; + else if (*value == 'm' || *value == 'M') + multiplier = UINT64_C(1) << 20; + else if (*value == 'g' || *value == 'G') + multiplier = UINT64_C(1) << 30; + + ++value; + + // Allow also e.g. Ki, KiB, and KB. + if (*value != '\0' && strcmp(value, "i") != 0 + && strcmp(value, "iB") != 0 + && strcmp(value, "B") != 0) + multiplier = 0; + + if (multiplier == 0) { + message(V_ERROR, _("%s: Invalid multiplier suffix"), + value - 1); + message_fatal(_("Valid suffixes are `KiB' (2^10), " + "`MiB' (2^20), and `GiB' (2^30).")); + } + + // Don't overflow here either. + if (result > UINT64_MAX / multiplier) + goto error; + + result *= multiplier; + } + + if (result < min || result > max) + goto error; + + return result; + +error: + message_fatal(_("Value of the option `%s' must be in the range " + "[%" PRIu64 ", %" PRIu64 "]"), + name, min, max); +} + + +extern uint64_t +round_up_to_mib(uint64_t n) +{ + return (n >> 20) + ((n & ((UINT32_C(1) << 20) - 1)) != 0); +} + + +/// Check if thousands separator is supported. Run-time checking is easiest +/// because it seems to be sometimes lacking even on a POSIXish system. +/// Note that trying to use thousands separators when snprintf() doesn't +/// support them results in undefined behavior. This just has happened to +/// work well enough in practice. +/// +/// DJGPP 2.05 added support for thousands separators but it's broken +/// at least under WinXP with Finnish locale that uses a non-breaking space +/// as the thousands separator. Workaround by disabling thousands separators +/// for DJGPP builds. +static void +check_thousand_sep(uint32_t slot) +{ + if (thousand == UNKNOWN) { + bufs[slot][0] = '\0'; +#ifndef __DJGPP__ + snprintf(bufs[slot], sizeof(bufs[slot]), "%'u", 1U); +#endif + thousand = bufs[slot][0] == '1' ? WORKS : BROKEN; + } + + return; +} + + +extern const char * +uint64_to_str(uint64_t value, uint32_t slot) +{ + assert(slot < ARRAY_SIZE(bufs)); + + check_thousand_sep(slot); + + if (thousand == WORKS) + snprintf(bufs[slot], sizeof(bufs[slot]), "%'" PRIu64, value); + else + snprintf(bufs[slot], sizeof(bufs[slot]), "%" PRIu64, value); + + return bufs[slot]; +} + + +extern const char * +uint64_to_nicestr(uint64_t value, enum nicestr_unit unit_min, + enum nicestr_unit unit_max, bool always_also_bytes, + uint32_t slot) +{ + assert(unit_min <= unit_max); + assert(unit_max <= NICESTR_TIB); + assert(slot < ARRAY_SIZE(bufs)); + + check_thousand_sep(slot); + + enum nicestr_unit unit = NICESTR_B; + char *pos = bufs[slot]; + size_t left = sizeof(bufs[slot]); + + if ((unit_min == NICESTR_B && value < 10000) + || unit_max == NICESTR_B) { + // The value is shown as bytes. + if (thousand == WORKS) + my_snprintf(&pos, &left, "%'u", (unsigned int)value); + else + my_snprintf(&pos, &left, "%u", (unsigned int)value); + } else { + // Scale the value to a nicer unit. Unless unit_min and + // unit_max limit us, we will show at most five significant + // digits with one decimal place. + double d = (double)(value); + do { + d /= 1024.0; + ++unit; + } while (unit < unit_min || (d > 9999.9 && unit < unit_max)); + + if (thousand == WORKS) + my_snprintf(&pos, &left, "%'.1f", d); + else + my_snprintf(&pos, &left, "%.1f", d); + } + + static const char suffix[5][4] = { "B", "KiB", "MiB", "GiB", "TiB" }; + my_snprintf(&pos, &left, " %s", suffix[unit]); + + if (always_also_bytes && value >= 10000) { + if (thousand == WORKS) + snprintf(pos, left, " (%'" PRIu64 " B)", value); + else + snprintf(pos, left, " (%" PRIu64 " B)", value); + } + + return bufs[slot]; +} + + +extern void +my_snprintf(char **pos, size_t *left, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + const int len = vsnprintf(*pos, *left, fmt, ap); + va_end(ap); + + // If an error occurred, we want the caller to think that the whole + // buffer was used. This way no more data will be written to the + // buffer. We don't need better error handling here, although it + // is possible that the result looks garbage on the terminal if + // e.g. an UTF-8 character gets split. That shouldn't (easily) + // happen though, because the buffers used have some extra room. + if (len < 0 || (size_t)(len) >= *left) { + *left = 0; + } else { + *pos += len; + *left -= (size_t)(len); + } + + return; +} + + +extern bool +is_tty_stdin(void) +{ + const bool ret = isatty(STDIN_FILENO); + + if (ret) + message_error(_("Compressed data cannot be read from " + "a terminal")); + + return ret; +} + + +extern bool +is_tty_stdout(void) +{ + const bool ret = isatty(STDOUT_FILENO); + + if (ret) + message_error(_("Compressed data cannot be written to " + "a terminal")); + + return ret; +} diff --git a/src/xz/util.h b/src/xz/util.h new file mode 100644 index 0000000..4a536f5 --- /dev/null +++ b/src/xz/util.h @@ -0,0 +1,119 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file util.h +/// \brief Miscellaneous utility functions +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +/// \brief Safe malloc() that never returns NULL +/// +/// \note xmalloc(), xrealloc(), and xstrdup() must not be used when +/// there are files open for writing, that should be cleaned up +/// before exiting. +#define xmalloc(size) xrealloc(NULL, size) + + +/// \brief Safe realloc() that never returns NULL +extern void *xrealloc(void *ptr, size_t size) + lzma_attribute((__malloc__)) lzma_attr_alloc_size(2); + + +/// \brief Safe strdup() that never returns NULL +extern char *xstrdup(const char *src) lzma_attribute((__malloc__)); + + +/// \brief Fancy version of strtoull() +/// +/// \param name Name of the option to show in case of an error +/// \param value String containing the number to be parsed; may +/// contain suffixes "k", "M", "G", "Ki", "Mi", or "Gi" +/// \param min Minimum valid value +/// \param max Maximum valid value +/// +/// \return Parsed value that is in the range [min, max]. Does not return +/// if an error occurs. +/// +extern uint64_t str_to_uint64(const char *name, const char *value, + uint64_t min, uint64_t max); + + +/// \brief Round an integer up to the next full MiB and convert to MiB +/// +/// This is used when printing memory usage and limit. +extern uint64_t round_up_to_mib(uint64_t n); + + +/// \brief Convert uint64_t to a string +/// +/// Convert the given value to a string with locale-specific thousand +/// separators, if supported by the snprintf() implementation. The string +/// is stored into an internal static buffer indicated by the slot argument. +/// A pointer to the selected buffer is returned. +/// +/// This function exists, because non-POSIX systems don't support thousand +/// separator in format strings. Solving the problem in a simple way doesn't +/// work, because it breaks gettext (specifically, the xgettext tool). +extern const char *uint64_to_str(uint64_t value, uint32_t slot); + + +enum nicestr_unit { + NICESTR_B, + NICESTR_KIB, + NICESTR_MIB, + NICESTR_GIB, + NICESTR_TIB, +}; + + +/// \brief Convert uint64_t to a nice human readable string +/// +/// This is like uint64_to_str() but uses B, KiB, MiB, GiB, or TiB suffix +/// and optionally includes the exact size in parenthesis. +/// +/// \param value Value to be printed +/// \param unit_min Smallest unit to use. This and unit_max are used +/// e.g. when showing the progress indicator to force +/// the unit to MiB. +/// \param unit_max Biggest unit to use. assert(unit_min <= unit_max). +/// \param always_also_bytes +/// Show also the exact byte value in parenthesis +/// if the nicely formatted string uses bigger unit +/// than bytes. +/// \param slot Which static buffer to use to hold the string. +/// This is shared with uint64_to_str(). +/// +/// \return Pointer to statically allocated buffer containing the string. +/// +/// \note This uses double_to_str() internally so the static buffer +/// in double_to_str() will be overwritten. +/// +extern const char *uint64_to_nicestr(uint64_t value, + enum nicestr_unit unit_min, enum nicestr_unit unit_max, + bool always_also_bytes, uint32_t slot); + + +/// \brief Wrapper for snprintf() to help constructing a string in pieces +/// +/// A maximum of *left bytes is written starting from *pos. *pos and *left +/// are updated accordingly. +extern void my_snprintf(char **pos, size_t *left, const char *fmt, ...) + lzma_attribute((__format__(__printf__, 3, 4))); + + +/// \brief Test if stdin is a terminal +/// +/// If stdin is a terminal, an error message is printed and exit status set +/// to EXIT_ERROR. +extern bool is_tty_stdin(void); + + +/// \brief Test if stdout is a terminal +/// +/// If stdout is a terminal, an error message is printed and exit status set +/// to EXIT_ERROR. +extern bool is_tty_stdout(void); diff --git a/src/xz/xz.1 b/src/xz/xz.1 new file mode 100644 index 0000000..caa5a06 --- /dev/null +++ b/src/xz/xz.1 @@ -0,0 +1,3020 @@ +'\" t +.\" +.\" Author: Lasse Collin +.\" +.\" This file has been put into the public domain. +.\" You can do whatever you want with this file. +.\" +.TH XZ 1 "2022-12-01" "Tukaani" "XZ Utils" +. +.SH NAME +xz, unxz, xzcat, lzma, unlzma, lzcat \- Compress or decompress .xz and .lzma files +. +.SH SYNOPSIS +.B xz +.RI [ option... ] +.RI [ file... ] +. +.SH COMMAND ALIASES +.B unxz +is equivalent to +.BR "xz \-\-decompress" . +.br +.B xzcat +is equivalent to +.BR "xz \-\-decompress \-\-stdout" . +.br +.B lzma +is equivalent to +.BR "xz \-\-format=lzma" . +.br +.B unlzma +is equivalent to +.BR "xz \-\-format=lzma \-\-decompress" . +.br +.B lzcat +is equivalent to +.BR "xz \-\-format=lzma \-\-decompress \-\-stdout" . +.PP +When writing scripts that need to decompress files, +it is recommended to always use the name +.B xz +with appropriate arguments +.RB ( "xz \-d" +or +.BR "xz \-dc" ) +instead of the names +.B unxz +and +.BR xzcat . +. +.SH DESCRIPTION +.B xz +is a general-purpose data compression tool with +command line syntax similar to +.BR gzip (1) +and +.BR bzip2 (1). +The native file format is the +.B .xz +format, but the legacy +.B .lzma +format used by LZMA Utils and +raw compressed streams with no container format headers +are also supported. +In addition, decompression of the +.B .lz +format used by +.B lzip +is supported. +.PP +.B xz +compresses or decompresses each +.I file +according to the selected operation mode. +If no +.I files +are given or +.I file +is +.BR \- , +.B xz +reads from standard input and writes the processed data +to standard output. +.B xz +will refuse (display an error and skip the +.IR file ) +to write compressed data to standard output if it is a terminal. +Similarly, +.B xz +will refuse to read compressed data +from standard input if it is a terminal. +.PP +Unless +.B \-\-stdout +is specified, +.I files +other than +.B \- +are written to a new file whose name is derived from the source +.I file +name: +.IP \(bu 3 +When compressing, the suffix of the target file format +.RB ( .xz +or +.BR .lzma ) +is appended to the source filename to get the target filename. +.IP \(bu 3 +When decompressing, the +.BR .xz , +.BR .lzma , +or +.B .lz +suffix is removed from the filename to get the target filename. +.B xz +also recognizes the suffixes +.B .txz +and +.BR .tlz , +and replaces them with the +.B .tar +suffix. +.PP +If the target file already exists, an error is displayed and the +.I file +is skipped. +.PP +Unless writing to standard output, +.B xz +will display a warning and skip the +.I file +if any of the following applies: +.IP \(bu 3 +.I File +is not a regular file. +Symbolic links are not followed, +and thus they are not considered to be regular files. +.IP \(bu 3 +.I File +has more than one hard link. +.IP \(bu 3 +.I File +has setuid, setgid, or sticky bit set. +.IP \(bu 3 +The operation mode is set to compress and the +.I file +already has a suffix of the target file format +.RB ( .xz +or +.B .txz +when compressing to the +.B .xz +format, and +.B .lzma +or +.B .tlz +when compressing to the +.B .lzma +format). +.IP \(bu 3 +The operation mode is set to decompress and the +.I file +doesn't have a suffix of any of the supported file formats +.RB ( .xz , +.BR .txz , +.BR .lzma , +.BR .tlz , +or +.BR .lz ). +.PP +After successfully compressing or decompressing the +.IR file , +.B xz +copies the owner, group, permissions, access time, +and modification time from the source +.I file +to the target file. +If copying the group fails, the permissions are modified +so that the target file doesn't become accessible to users +who didn't have permission to access the source +.IR file . +.B xz +doesn't support copying other metadata like access control lists +or extended attributes yet. +.PP +Once the target file has been successfully closed, the source +.I file +is removed unless +.B \-\-keep +was specified. +The source +.I file +is never removed if the output is written to standard output +or if an error occurs. +.PP +Sending +.B SIGINFO +or +.B SIGUSR1 +to the +.B xz +process makes it print progress information to standard error. +This has only limited use since when standard error +is a terminal, using +.B \-\-verbose +will display an automatically updating progress indicator. +. +.SS "Memory usage" +The memory usage of +.B xz +varies from a few hundred kilobytes to several gigabytes +depending on the compression settings. +The settings used when compressing a file determine +the memory requirements of the decompressor. +Typically the decompressor needs 5\ % to 20\ % of +the amount of memory that the compressor needed when +creating the file. +For example, decompressing a file created with +.B xz \-9 +currently requires 65\ MiB of memory. +Still, it is possible to have +.B .xz +files that require several gigabytes of memory to decompress. +.PP +Especially users of older systems may find +the possibility of very large memory usage annoying. +To prevent uncomfortable surprises, +.B xz +has a built-in memory usage limiter, which is disabled by default. +While some operating systems provide ways to limit +the memory usage of processes, relying on it +wasn't deemed to be flexible enough (for example, using +.BR ulimit (1) +to limit virtual memory tends to cripple +.BR mmap (2)). +.PP +The memory usage limiter can be enabled with +the command line option \fB\-\-memlimit=\fIlimit\fR. +Often it is more convenient to enable the limiter +by default by setting the environment variable +.BR XZ_DEFAULTS , +for example, +.BR XZ_DEFAULTS=\-\-memlimit=150MiB . +It is possible to set the limits separately +for compression and decompression by using +.BI \-\-memlimit\-compress= limit +and \fB\-\-memlimit\-decompress=\fIlimit\fR. +Using these two options outside +.B XZ_DEFAULTS +is rarely useful because a single run of +.B xz +cannot do both compression and decompression and +.BI \-\-memlimit= limit +(or +.B \-M +.IR limit ) +is shorter to type on the command line. +.PP +If the specified memory usage limit is exceeded when decompressing, +.B xz +will display an error and decompressing the file will fail. +If the limit is exceeded when compressing, +.B xz +will try to scale the settings down so that the limit +is no longer exceeded (except when using +.B \-\-format=raw +or +.BR \-\-no\-adjust ). +This way the operation won't fail unless the limit is very small. +The scaling of the settings is done in steps that don't +match the compression level presets, for example, if the limit is +only slightly less than the amount required for +.BR "xz \-9" , +the settings will be scaled down only a little, +not all the way down to +.BR "xz \-8" . +. +.SS "Concatenation and padding with .xz files" +It is possible to concatenate +.B .xz +files as is. +.B xz +will decompress such files as if they were a single +.B .xz +file. +.PP +It is possible to insert padding between the concatenated parts +or after the last part. +The padding must consist of null bytes and the size +of the padding must be a multiple of four bytes. +This can be useful, for example, if the +.B .xz +file is stored on a medium that measures file sizes +in 512-byte blocks. +.PP +Concatenation and padding are not allowed with +.B .lzma +files or raw streams. +. +.SH OPTIONS +. +.SS "Integer suffixes and special values" +In most places where an integer argument is expected, +an optional suffix is supported to easily indicate large integers. +There must be no space between the integer and the suffix. +.TP +.B KiB +Multiply the integer by 1,024 (2^10). +.BR Ki , +.BR k , +.BR kB , +.BR K , +and +.B KB +are accepted as synonyms for +.BR KiB . +.TP +.B MiB +Multiply the integer by 1,048,576 (2^20). +.BR Mi , +.BR m , +.BR M , +and +.B MB +are accepted as synonyms for +.BR MiB . +.TP +.B GiB +Multiply the integer by 1,073,741,824 (2^30). +.BR Gi , +.BR g , +.BR G , +and +.B GB +are accepted as synonyms for +.BR GiB . +.PP +The special value +.B max +can be used to indicate the maximum integer value +supported by the option. +. +.SS "Operation mode" +If multiple operation mode options are given, +the last one takes effect. +.TP +.BR \-z ", " \-\-compress +Compress. +This is the default operation mode when no operation mode option +is specified and no other operation mode is implied from +the command name (for example, +.B unxz +implies +.BR \-\-decompress ). +.TP +.BR \-d ", " \-\-decompress ", " \-\-uncompress +Decompress. +.TP +.BR \-t ", " \-\-test +Test the integrity of compressed +.IR files . +This option is equivalent to +.B "\-\-decompress \-\-stdout" +except that the decompressed data is discarded instead of being +written to standard output. +No files are created or removed. +.TP +.BR \-l ", " \-\-list +Print information about compressed +.IR files . +No uncompressed output is produced, +and no files are created or removed. +In list mode, the program cannot read +the compressed data from standard +input or from other unseekable sources. +.IP "" +The default listing shows basic information about +.IR files , +one file per line. +To get more detailed information, use also the +.B \-\-verbose +option. +For even more information, use +.B \-\-verbose +twice, but note that this may be slow, because getting all the extra +information requires many seeks. +The width of verbose output exceeds +80 characters, so piping the output to, for example, +.B "less\ \-S" +may be convenient if the terminal isn't wide enough. +.IP "" +The exact output may vary between +.B xz +versions and different locales. +For machine-readable output, +.B \-\-robot \-\-list +should be used. +. +.SS "Operation modifiers" +.TP +.BR \-k ", " \-\-keep +Don't delete the input files. +.IP "" +Since +.B xz +5.2.6, +this option also makes +.B xz +compress or decompress even if the input is +a symbolic link to a regular file, +has more than one hard link, +or has the setuid, setgid, or sticky bit set. +The setuid, setgid, and sticky bits are not copied +to the target file. +In earlier versions this was only done with +.BR \-\-force . +.TP +.BR \-f ", " \-\-force +This option has several effects: +.RS +.IP \(bu 3 +If the target file already exists, +delete it before compressing or decompressing. +.IP \(bu 3 +Compress or decompress even if the input is +a symbolic link to a regular file, +has more than one hard link, +or has the setuid, setgid, or sticky bit set. +The setuid, setgid, and sticky bits are not copied +to the target file. +.IP \(bu 3 +When used with +.B \-\-decompress +.B \-\-stdout +and +.B xz +cannot recognize the type of the source file, +copy the source file as is to standard output. +This allows +.B xzcat +.B \-\-force +to be used like +.BR cat (1) +for files that have not been compressed with +.BR xz . +Note that in future, +.B xz +might support new compressed file formats, which may make +.B xz +decompress more types of files instead of copying them as is to +standard output. +.BI \-\-format= format +can be used to restrict +.B xz +to decompress only a single file format. +.RE +.TP +.BR \-c ", " \-\-stdout ", " \-\-to\-stdout +Write the compressed or decompressed data to +standard output instead of a file. +This implies +.BR \-\-keep . +.TP +.B \-\-single\-stream +Decompress only the first +.B .xz +stream, and +silently ignore possible remaining input data following the stream. +Normally such trailing garbage makes +.B xz +display an error. +.IP "" +.B xz +never decompresses more than one stream from +.B .lzma +files or raw streams, but this option still makes +.B xz +ignore the possible trailing data after the +.B .lzma +file or raw stream. +.IP "" +This option has no effect if the operation mode is not +.B \-\-decompress +or +.BR \-\-test . +.TP +.B \-\-no\-sparse +Disable creation of sparse files. +By default, if decompressing into a regular file, +.B xz +tries to make the file sparse if the decompressed data contains +long sequences of binary zeros. +It also works when writing to standard output +as long as standard output is connected to a regular file +and certain additional conditions are met to make it safe. +Creating sparse files may save disk space and speed up +the decompression by reducing the amount of disk I/O. +.TP +\fB\-S\fR \fI.suf\fR, \fB\-\-suffix=\fI.suf +When compressing, use +.I .suf +as the suffix for the target file instead of +.B .xz +or +.BR .lzma . +If not writing to standard output and +the source file already has the suffix +.IR .suf , +a warning is displayed and the file is skipped. +.IP "" +When decompressing, recognize files with the suffix +.I .suf +in addition to files with the +.BR .xz , +.BR .txz , +.BR .lzma , +.BR .tlz , +or +.B .lz +suffix. +If the source file has the suffix +.IR .suf , +the suffix is removed to get the target filename. +.IP "" +When compressing or decompressing raw streams +.RB ( \-\-format=raw ), +the suffix must always be specified unless +writing to standard output, +because there is no default suffix for raw streams. +.TP +\fB\-\-files\fR[\fB=\fIfile\fR] +Read the filenames to process from +.IR file ; +if +.I file +is omitted, filenames are read from standard input. +Filenames must be terminated with the newline character. +A dash +.RB ( \- ) +is taken as a regular filename; it doesn't mean standard input. +If filenames are given also as command line arguments, they are +processed before the filenames read from +.IR file . +.TP +\fB\-\-files0\fR[\fB=\fIfile\fR] +This is identical to \fB\-\-files\fR[\fB=\fIfile\fR] except +that each filename must be terminated with the null character. +. +.SS "Basic file format and compression options" +.TP +\fB\-F\fR \fIformat\fR, \fB\-\-format=\fIformat +Specify the file +.I format +to compress or decompress: +.RS +.TP +.B auto +This is the default. +When compressing, +.B auto +is equivalent to +.BR xz . +When decompressing, +the format of the input file is automatically detected. +Note that raw streams (created with +.BR \-\-format=raw ) +cannot be auto-detected. +.TP +.B xz +Compress to the +.B .xz +file format, or accept only +.B .xz +files when decompressing. +.TP +.BR lzma ", " alone +Compress to the legacy +.B .lzma +file format, or accept only +.B .lzma +files when decompressing. +The alternative name +.B alone +is provided for backwards compatibility with LZMA Utils. +.TP +.B lzip +Accept only +.B .lz +files when decompressing. +Compression is not supported. +.IP "" +The +.B .lz +format version 0 and the unextended version 1 are supported. +Version 0 files were produced by +.B lzip +1.3 and older. +Such files aren't common but may be found from file archives +as a few source packages were released in this format. +People might have old personal files in this format too. +Decompression support for the format version 0 was removed in +.B lzip +1.18. +.IP "" +.B lzip +1.4 and later create files in the format version 1. +The sync flush marker extension to the format version 1 was added in +.B lzip +1.6. +This extension is rarely used and isn't supported by +.B xz +(diagnosed as corrupt input). +.TP +.B raw +Compress or uncompress a raw stream (no headers). +This is meant for advanced users only. +To decode raw streams, you need use +.B \-\-format=raw +and explicitly specify the filter chain, +which normally would have been stored in the container headers. +.RE +.TP +\fB\-C\fR \fIcheck\fR, \fB\-\-check=\fIcheck +Specify the type of the integrity check. +The check is calculated from the uncompressed data and +stored in the +.B .xz +file. +This option has an effect only when compressing into the +.B .xz +format; the +.B .lzma +format doesn't support integrity checks. +The integrity check (if any) is verified when the +.B .xz +file is decompressed. +.IP "" +Supported +.I check +types: +.RS +.TP +.B none +Don't calculate an integrity check at all. +This is usually a bad idea. +This can be useful when integrity of the data is verified +by other means anyway. +.TP +.B crc32 +Calculate CRC32 using the polynomial from IEEE-802.3 (Ethernet). +.TP +.B crc64 +Calculate CRC64 using the polynomial from ECMA-182. +This is the default, since it is slightly better than CRC32 +at detecting damaged files and the speed difference is negligible. +.TP +.B sha256 +Calculate SHA-256. +This is somewhat slower than CRC32 and CRC64. +.RE +.IP "" +Integrity of the +.B .xz +headers is always verified with CRC32. +It is not possible to change or disable it. +.TP +.B \-\-ignore\-check +Don't verify the integrity check of the compressed data when decompressing. +The CRC32 values in the +.B .xz +headers will still be verified normally. +.IP "" +.B "Do not use this option unless you know what you are doing." +Possible reasons to use this option: +.RS +.IP \(bu 3 +Trying to recover data from a corrupt .xz file. +.IP \(bu 3 +Speeding up decompression. +This matters mostly with SHA-256 or +with files that have compressed extremely well. +It's recommended to not use this option for this purpose +unless the file integrity is verified externally in some other way. +.RE +.TP +.BR \-0 " ... " \-9 +Select a compression preset level. +The default is +.BR \-6 . +If multiple preset levels are specified, +the last one takes effect. +If a custom filter chain was already specified, setting +a compression preset level clears the custom filter chain. +.IP "" +The differences between the presets are more significant than with +.BR gzip (1) +and +.BR bzip2 (1). +The selected compression settings determine +the memory requirements of the decompressor, +thus using a too high preset level might make it painful +to decompress the file on an old system with little RAM. +Specifically, +.B "it's not a good idea to blindly use \-9 for everything" +like it often is with +.BR gzip (1) +and +.BR bzip2 (1). +.RS +.TP +.BR "\-0" " ... " "\-3" +These are somewhat fast presets. +.B \-0 +is sometimes faster than +.B "gzip \-9" +while compressing much better. +The higher ones often have speed comparable to +.BR bzip2 (1) +with comparable or better compression ratio, +although the results +depend a lot on the type of data being compressed. +.TP +.BR "\-4" " ... " "\-6" +Good to very good compression while keeping +decompressor memory usage reasonable even for old systems. +.B \-6 +is the default, which is usually a good choice +for distributing files that need to be decompressible +even on systems with only 16\ MiB RAM. +.RB ( \-5e +or +.B \-6e +may be worth considering too. +See +.BR \-\-extreme .) +.TP +.B "\-7 ... \-9" +These are like +.B \-6 +but with higher compressor and decompressor memory requirements. +These are useful only when compressing files bigger than +8\ MiB, 16\ MiB, and 32\ MiB, respectively. +.RE +.IP "" +On the same hardware, the decompression speed is approximately +a constant number of bytes of compressed data per second. +In other words, the better the compression, +the faster the decompression will usually be. +This also means that the amount of uncompressed output +produced per second can vary a lot. +.IP "" +The following table summarises the features of the presets: +.RS +.RS +.PP +.TS +tab(;); +c c c c c +n n n n n. +Preset;DictSize;CompCPU;CompMem;DecMem +\-0;256 KiB;0;3 MiB;1 MiB +\-1;1 MiB;1;9 MiB;2 MiB +\-2;2 MiB;2;17 MiB;3 MiB +\-3;4 MiB;3;32 MiB;5 MiB +\-4;4 MiB;4;48 MiB;5 MiB +\-5;8 MiB;5;94 MiB;9 MiB +\-6;8 MiB;6;94 MiB;9 MiB +\-7;16 MiB;6;186 MiB;17 MiB +\-8;32 MiB;6;370 MiB;33 MiB +\-9;64 MiB;6;674 MiB;65 MiB +.TE +.RE +.RE +.IP "" +Column descriptions: +.RS +.IP \(bu 3 +DictSize is the LZMA2 dictionary size. +It is waste of memory to use a dictionary bigger than +the size of the uncompressed file. +This is why it is good to avoid using the presets +.BR \-7 " ... " \-9 +when there's no real need for them. +At +.B \-6 +and lower, the amount of memory wasted is +usually low enough to not matter. +.IP \(bu 3 +CompCPU is a simplified representation of the LZMA2 settings +that affect compression speed. +The dictionary size affects speed too, +so while CompCPU is the same for levels +.BR \-6 " ... " \-9 , +higher levels still tend to be a little slower. +To get even slower and thus possibly better compression, see +.BR \-\-extreme . +.IP \(bu 3 +CompMem contains the compressor memory requirements +in the single-threaded mode. +It may vary slightly between +.B xz +versions. +Memory requirements of some of the future multithreaded modes may +be dramatically higher than that of the single-threaded mode. +.IP \(bu 3 +DecMem contains the decompressor memory requirements. +That is, the compression settings determine +the memory requirements of the decompressor. +The exact decompressor memory usage is slightly more than +the LZMA2 dictionary size, but the values in the table +have been rounded up to the next full MiB. +.RE +.TP +.BR \-e ", " \-\-extreme +Use a slower variant of the selected compression preset level +.RB ( \-0 " ... " \-9 ) +to hopefully get a little bit better compression ratio, +but with bad luck this can also make it worse. +Decompressor memory usage is not affected, +but compressor memory usage increases a little at preset levels +.BR \-0 " ... " \-3 . +.IP "" +Since there are two presets with dictionary sizes +4\ MiB and 8\ MiB, the presets +.B \-3e +and +.B \-5e +use slightly faster settings (lower CompCPU) than +.B \-4e +and +.BR \-6e , +respectively. +That way no two presets are identical. +.RS +.RS +.PP +.TS +tab(;); +c c c c c +n n n n n. +Preset;DictSize;CompCPU;CompMem;DecMem +\-0e;256 KiB;8;4 MiB;1 MiB +\-1e;1 MiB;8;13 MiB;2 MiB +\-2e;2 MiB;8;25 MiB;3 MiB +\-3e;4 MiB;7;48 MiB;5 MiB +\-4e;4 MiB;8;48 MiB;5 MiB +\-5e;8 MiB;7;94 MiB;9 MiB +\-6e;8 MiB;8;94 MiB;9 MiB +\-7e;16 MiB;8;186 MiB;17 MiB +\-8e;32 MiB;8;370 MiB;33 MiB +\-9e;64 MiB;8;674 MiB;65 MiB +.TE +.RE +.RE +.IP "" +For example, there are a total of four presets that use +8\ MiB dictionary, whose order from the fastest to the slowest is +.BR \-5 , +.BR \-6 , +.BR \-5e , +and +.BR \-6e . +.TP +.B \-\-fast +.PD 0 +.TP +.B \-\-best +.PD +These are somewhat misleading aliases for +.B \-0 +and +.BR \-9 , +respectively. +These are provided only for backwards compatibility +with LZMA Utils. +Avoid using these options. +.TP +.BI \-\-block\-size= size +When compressing to the +.B .xz +format, split the input data into blocks of +.I size +bytes. +The blocks are compressed independently from each other, +which helps with multi-threading and +makes limited random-access decompression possible. +This option is typically used to override the default +block size in multi-threaded mode, +but this option can be used in single-threaded mode too. +.IP "" +In multi-threaded mode about three times +.I size +bytes will be allocated in each thread for buffering input and output. +The default +.I size +is three times the LZMA2 dictionary size or 1 MiB, +whichever is more. +Typically a good value is 2\(en4 times +the size of the LZMA2 dictionary or at least 1 MiB. +Using +.I size +less than the LZMA2 dictionary size is waste of RAM +because then the LZMA2 dictionary buffer will never get fully used. +The sizes of the blocks are stored in the block headers, +which a future version of +.B xz +will use for multi-threaded decompression. +.IP "" +In single-threaded mode no block splitting is done by default. +Setting this option doesn't affect memory usage. +No size information is stored in block headers, +thus files created in single-threaded mode +won't be identical to files created in multi-threaded mode. +The lack of size information also means that a future version of +.B xz +won't be able decompress the files in multi-threaded mode. +.TP +.BI \-\-block\-list= sizes +When compressing to the +.B .xz +format, start a new block after +the given intervals of uncompressed data. +.IP "" +The uncompressed +.I sizes +of the blocks are specified as a comma-separated list. +Omitting a size (two or more consecutive commas) is a shorthand +to use the size of the previous block. +.IP "" +If the input file is bigger than the sum of +.IR sizes , +the last value in +.I sizes +is repeated until the end of the file. +A special value of +.B 0 +may be used as the last value to indicate that +the rest of the file should be encoded as a single block. +.IP "" +If one specifies +.I sizes +that exceed the encoder's block size +(either the default value in threaded mode or +the value specified with \fB\-\-block\-size=\fIsize\fR), +the encoder will create additional blocks while +keeping the boundaries specified in +.IR sizes . +For example, if one specifies +.B \-\-block\-size=10MiB +.B \-\-block\-list=5MiB,10MiB,8MiB,12MiB,24MiB +and the input file is 80 MiB, +one will get 11 blocks: +5, 10, 8, 10, 2, 10, 10, 4, 10, 10, and 1 MiB. +.IP "" +In multi-threaded mode the sizes of the blocks +are stored in the block headers. +This isn't done in single-threaded mode, +so the encoded output won't be +identical to that of the multi-threaded mode. +.TP +.BI \-\-flush\-timeout= timeout +When compressing, if more than +.I timeout +milliseconds (a positive integer) has passed since the previous flush and +reading more input would block, +all the pending input data is flushed from the encoder and +made available in the output stream. +This can be useful if +.B xz +is used to compress data that is streamed over a network. +Small +.I timeout +values make the data available at the receiving end +with a small delay, but large +.I timeout +values give better compression ratio. +.IP "" +This feature is disabled by default. +If this option is specified more than once, the last one takes effect. +The special +.I timeout +value of +.B 0 +can be used to explicitly disable this feature. +.IP "" +This feature is not available on non-POSIX systems. +.IP "" +.\" FIXME +.B "This feature is still experimental." +Currently +.B xz +is unsuitable for decompressing the stream in real time due to how +.B xz +does buffering. +.TP +.BI \-\-memlimit\-compress= limit +Set a memory usage limit for compression. +If this option is specified multiple times, +the last one takes effect. +.IP "" +If the compression settings exceed the +.IR limit , +.B xz +will attempt to adjust the settings downwards so that +the limit is no longer exceeded and display a notice that +automatic adjustment was done. +The adjustments are done in this order: +reducing the number of threads, +switching to single-threaded mode +if even one thread in multi-threaded mode exceeds the +.IR limit , +and finally reducing the LZMA2 dictionary size. +.IP "" +When compressing with +.B \-\-format=raw +or if +.B \-\-no\-adjust +has been specified, +only the number of threads may be reduced +since it can be done without affecting the compressed output. +.IP "" +If the +.I limit +cannot be met even with the adjustments described above, +an error is displayed and +.B xz +will exit with exit status 1. +.IP "" +The +.I limit +can be specified in multiple ways: +.RS +.IP \(bu 3 +The +.I limit +can be an absolute value in bytes. +Using an integer suffix like +.B MiB +can be useful. +Example: +.B "\-\-memlimit\-compress=80MiB" +.IP \(bu 3 +The +.I limit +can be specified as a percentage of total physical memory (RAM). +This can be useful especially when setting the +.B XZ_DEFAULTS +environment variable in a shell initialization script +that is shared between different computers. +That way the limit is automatically bigger +on systems with more memory. +Example: +.B "\-\-memlimit\-compress=70%" +.IP \(bu 3 +The +.I limit +can be reset back to its default value by setting it to +.BR 0 . +This is currently equivalent to setting the +.I limit +to +.B max +(no memory usage limit). +.RE +.IP "" +For 32-bit +.B xz +there is a special case: if the +.I limit +would be over +.BR "4020\ MiB" , +the +.I limit +is set to +.BR "4020\ MiB" . +On MIPS32 +.B "2000\ MiB" +is used instead. +(The values +.B 0 +and +.B max +aren't affected by this. +A similar feature doesn't exist for decompression.) +This can be helpful when a 32-bit executable has access +to 4\ GiB address space (2 GiB on MIPS32) +while hopefully doing no harm in other situations. +.IP "" +See also the section +.BR "Memory usage" . +.TP +.BI \-\-memlimit\-decompress= limit +Set a memory usage limit for decompression. +This also affects the +.B \-\-list +mode. +If the operation is not possible without exceeding the +.IR limit , +.B xz +will display an error and decompressing the file will fail. +See +.BI \-\-memlimit\-compress= limit +for possible ways to specify the +.IR limit . +.TP +.BI \-\-memlimit\-mt\-decompress= limit +Set a memory usage limit for multi-threaded decompression. +This can only affect the number of threads; +this will never make +.B xz +refuse to decompress a file. +If +.I limit +is too low to allow any multi-threading, the +.I limit +is ignored and +.B xz +will continue in single-threaded mode. +Note that if also +.B \-\-memlimit\-decompress +is used, +it will always apply to both single-threaded and multi-threaded modes, +and so the effective +.I limit +for multi-threading will never be higher than the limit set with +.BR \-\-memlimit\-decompress . +.IP "" +In contrast to the other memory usage limit options, +.BI \-\-memlimit\-mt\-decompress= limit +has a system-specific default +.IR limit . +.B "xz \-\-info\-memory" +can be used to see the current value. +.IP "" +This option and its default value exist +because without any limit the threaded decompressor +could end up allocating an insane amount of memory with some input files. +If the default +.I limit +is too low on your system, +feel free to increase the +.I limit +but never set it to a value larger than the amount of usable RAM +as with appropriate input files +.B xz +will attempt to use that amount of memory +even with a low number of threads. +Running out of memory or swapping +will not improve decompression performance. +.IP "" +See +.BI \-\-memlimit\-compress= limit +for possible ways to specify the +.IR limit . +Setting +.I limit +to +.B 0 +resets the +.I limit +to the default system-specific value. +.IP "" +.TP +\fB\-M\fR \fIlimit\fR, \fB\-\-memlimit=\fIlimit\fR, \fB\-\-memory=\fIlimit +This is equivalent to specifying +.BI \-\-memlimit\-compress= limit +.BI \-\-memlimit-decompress= limit +\fB\-\-memlimit\-mt\-decompress=\fIlimit\fR. +.TP +.B \-\-no\-adjust +Display an error and exit if the memory usage limit cannot be +met without adjusting settings that affect the compressed output. +That is, this prevents +.B xz +from switching the encoder from multi-threaded mode to single-threaded mode +and from reducing the LZMA2 dictionary size. +Even when this option is used the number of threads may be reduced +to meet the memory usage limit as that won't affect the compressed output. +.IP "" +Automatic adjusting is always disabled when creating raw streams +.RB ( \-\-format=raw ). +.TP +\fB\-T\fR \fIthreads\fR, \fB\-\-threads=\fIthreads +Specify the number of worker threads to use. +Setting +.I threads +to a special value +.B 0 +makes +.B xz +use up to as many threads as the processor(s) on the system support. +The actual number of threads can be fewer than +.I threads +if the input file is not big enough +for threading with the given settings or +if using more threads would exceed the memory usage limit. +.IP "" +The single-threaded and multi-threaded compressors produce different output. +Single-threaded compressor will give the smallest file size but +only the output from the multi-threaded compressor can be decompressed +using multiple threads. +Setting +.I threads +to +.B 1 +will use the single-threaded mode. +Setting +.I threads +to any other value, including +.BR 0 , +will use the multi-threaded compressor +even if the system supports only one hardware thread. +.RB ( xz +5.2.x +used single-threaded mode in this situation.) +.IP "" +To use multi-threaded mode with only one thread, set +.I threads +to +.BR +1 . +The +.B + +prefix has no effect with values other than +.BR 1 . +A memory usage limit can still make +.B xz +switch to single-threaded mode unless +.B \-\-no\-adjust +is used. +Support for the +.B + +prefix was added in +.B xz +5.4.0. +.IP "" +If an automatic number of threads has been requested and +no memory usage limit has been specified, +then a system-specific default soft limit will be used to possibly +limit the number of threads. +It is a soft limit in sense that it is ignored +if the number of threads becomes one, +thus a soft limit will never stop +.B xz +from compressing or decompressing. +This default soft limit will not make +.B xz +switch from multi-threaded mode to single-threaded mode. +The active limits can be seen with +.BR "xz \-\-info\-memory" . +.IP "" +Currently the only threading method is to split the input into +blocks and compress them independently from each other. +The default block size depends on the compression level and +can be overridden with the +.BI \-\-block\-size= size +option. +.IP "" +Threaded decompression only works on files that contain +multiple blocks with size information in block headers. +All large enough files compressed in multi-threaded mode +meet this condition, +but files compressed in single-threaded mode don't even if +.BI \-\-block\-size= size +has been used. +. +.SS "Custom compressor filter chains" +A custom filter chain allows specifying +the compression settings in detail instead of relying on +the settings associated to the presets. +When a custom filter chain is specified, +preset options +.RB ( \-0 +\&...\& +.B \-9 +and +.BR \-\-extreme ) +earlier on the command line are forgotten. +If a preset option is specified +after one or more custom filter chain options, +the new preset takes effect and +the custom filter chain options specified earlier are forgotten. +.PP +A filter chain is comparable to piping on the command line. +When compressing, the uncompressed input goes to the first filter, +whose output goes to the next filter (if any). +The output of the last filter gets written to the compressed file. +The maximum number of filters in the chain is four, +but typically a filter chain has only one or two filters. +.PP +Many filters have limitations on where they can be +in the filter chain: +some filters can work only as the last filter in the chain, +some only as a non-last filter, and some work in any position +in the chain. +Depending on the filter, this limitation is either inherent to +the filter design or exists to prevent security issues. +.PP +A custom filter chain is specified by using one or more +filter options in the order they are wanted in the filter chain. +That is, the order of filter options is significant! +When decoding raw streams +.RB ( \-\-format=raw ), +the filter chain is specified in the same order as +it was specified when compressing. +.PP +Filters take filter-specific +.I options +as a comma-separated list. +Extra commas in +.I options +are ignored. +Every option has a default value, so you need to +specify only those you want to change. +.PP +To see the whole filter chain and +.IR options , +use +.B "xz \-vv" +(that is, use +.B \-\-verbose +twice). +This works also for viewing the filter chain options used by presets. +.TP +\fB\-\-lzma1\fR[\fB=\fIoptions\fR] +.PD 0 +.TP +\fB\-\-lzma2\fR[\fB=\fIoptions\fR] +.PD +Add LZMA1 or LZMA2 filter to the filter chain. +These filters can be used only as the last filter in the chain. +.IP "" +LZMA1 is a legacy filter, +which is supported almost solely due to the legacy +.B .lzma +file format, which supports only LZMA1. +LZMA2 is an updated +version of LZMA1 to fix some practical issues of LZMA1. +The +.B .xz +format uses LZMA2 and doesn't support LZMA1 at all. +Compression speed and ratios of LZMA1 and LZMA2 +are practically the same. +.IP "" +LZMA1 and LZMA2 share the same set of +.IR options : +.RS +.TP +.BI preset= preset +Reset all LZMA1 or LZMA2 +.I options +to +.IR preset . +.I Preset +consist of an integer, which may be followed by single-letter +preset modifiers. +The integer can be from +.B 0 +to +.BR 9 , +matching the command line options +.B \-0 +\&...\& +.BR \-9 . +The only supported modifier is currently +.BR e , +which matches +.BR \-\-extreme . +If no +.B preset +is specified, the default values of LZMA1 or LZMA2 +.I options +are taken from the preset +.BR 6 . +.TP +.BI dict= size +Dictionary (history buffer) +.I size +indicates how many bytes of the recently processed +uncompressed data is kept in memory. +The algorithm tries to find repeating byte sequences (matches) in +the uncompressed data, and replace them with references +to the data currently in the dictionary. +The bigger the dictionary, the higher is the chance +to find a match. +Thus, increasing dictionary +.I size +usually improves compression ratio, but +a dictionary bigger than the uncompressed file is waste of memory. +.IP "" +Typical dictionary +.I size +is from 64\ KiB to 64\ MiB. +The minimum is 4\ KiB. +The maximum for compression is currently 1.5\ GiB (1536\ MiB). +The decompressor already supports dictionaries up to +one byte less than 4\ GiB, which is the maximum for +the LZMA1 and LZMA2 stream formats. +.IP "" +Dictionary +.I size +and match finder +.RI ( mf ) +together determine the memory usage of the LZMA1 or LZMA2 encoder. +The same (or bigger) dictionary +.I size +is required for decompressing that was used when compressing, +thus the memory usage of the decoder is determined +by the dictionary size used when compressing. +The +.B .xz +headers store the dictionary +.I size +either as +.RI "2^" n +or +.RI "2^" n " + 2^(" n "\-1)," +so these +.I sizes +are somewhat preferred for compression. +Other +.I sizes +will get rounded up when stored in the +.B .xz +headers. +.TP +.BI lc= lc +Specify the number of literal context bits. +The minimum is 0 and the maximum is 4; the default is 3. +In addition, the sum of +.I lc +and +.I lp +must not exceed 4. +.IP "" +All bytes that cannot be encoded as matches +are encoded as literals. +That is, literals are simply 8-bit bytes +that are encoded one at a time. +.IP "" +The literal coding makes an assumption that the highest +.I lc +bits of the previous uncompressed byte correlate +with the next byte. +For example, in typical English text, an upper-case letter is +often followed by a lower-case letter, and a lower-case +letter is usually followed by another lower-case letter. +In the US-ASCII character set, the highest three bits are 010 +for upper-case letters and 011 for lower-case letters. +When +.I lc +is at least 3, the literal coding can take advantage of +this property in the uncompressed data. +.IP "" +The default value (3) is usually good. +If you want maximum compression, test +.BR lc=4 . +Sometimes it helps a little, and +sometimes it makes compression worse. +If it makes it worse, test +.B lc=2 +too. +.TP +.BI lp= lp +Specify the number of literal position bits. +The minimum is 0 and the maximum is 4; the default is 0. +.IP "" +.I Lp +affects what kind of alignment in the uncompressed data is +assumed when encoding literals. +See +.I pb +below for more information about alignment. +.TP +.BI pb= pb +Specify the number of position bits. +The minimum is 0 and the maximum is 4; the default is 2. +.IP "" +.I Pb +affects what kind of alignment in the uncompressed data is +assumed in general. +The default means four-byte alignment +.RI (2^ pb =2^2=4), +which is often a good choice when there's no better guess. +.IP "" +When the alignment is known, setting +.I pb +accordingly may reduce the file size a little. +For example, with text files having one-byte +alignment (US-ASCII, ISO-8859-*, UTF-8), setting +.B pb=0 +can improve compression slightly. +For UTF-16 text, +.B pb=1 +is a good choice. +If the alignment is an odd number like 3 bytes, +.B pb=0 +might be the best choice. +.IP "" +Even though the assumed alignment can be adjusted with +.I pb +and +.IR lp , +LZMA1 and LZMA2 still slightly favor 16-byte alignment. +It might be worth taking into account when designing file formats +that are likely to be often compressed with LZMA1 or LZMA2. +.TP +.BI mf= mf +Match finder has a major effect on encoder speed, +memory usage, and compression ratio. +Usually Hash Chain match finders are faster than Binary Tree +match finders. +The default depends on the +.IR preset : +0 uses +.BR hc3 , +1\(en3 +use +.BR hc4 , +and the rest use +.BR bt4 . +.IP "" +The following match finders are supported. +The memory usage formulas below are rough approximations, +which are closest to the reality when +.I dict +is a power of two. +.RS +.TP +.B hc3 +Hash Chain with 2- and 3-byte hashing +.br +Minimum value for +.IR nice : +3 +.br +Memory usage: +.br +.I dict +* 7.5 (if +.I dict +<= 16 MiB); +.br +.I dict +* 5.5 + 64 MiB (if +.I dict +> 16 MiB) +.TP +.B hc4 +Hash Chain with 2-, 3-, and 4-byte hashing +.br +Minimum value for +.IR nice : +4 +.br +Memory usage: +.br +.I dict +* 7.5 (if +.I dict +<= 32 MiB); +.br +.I dict +* 6.5 (if +.I dict +> 32 MiB) +.TP +.B bt2 +Binary Tree with 2-byte hashing +.br +Minimum value for +.IR nice : +2 +.br +Memory usage: +.I dict +* 9.5 +.TP +.B bt3 +Binary Tree with 2- and 3-byte hashing +.br +Minimum value for +.IR nice : +3 +.br +Memory usage: +.br +.I dict +* 11.5 (if +.I dict +<= 16 MiB); +.br +.I dict +* 9.5 + 64 MiB (if +.I dict +> 16 MiB) +.TP +.B bt4 +Binary Tree with 2-, 3-, and 4-byte hashing +.br +Minimum value for +.IR nice : +4 +.br +Memory usage: +.br +.I dict +* 11.5 (if +.I dict +<= 32 MiB); +.br +.I dict +* 10.5 (if +.I dict +> 32 MiB) +.RE +.TP +.BI mode= mode +Compression +.I mode +specifies the method to analyze +the data produced by the match finder. +Supported +.I modes +are +.B fast +and +.BR normal . +The default is +.B fast +for +.I presets +0\(en3 and +.B normal +for +.I presets +4\(en9. +.IP "" +Usually +.B fast +is used with Hash Chain match finders and +.B normal +with Binary Tree match finders. +This is also what the +.I presets +do. +.TP +.BI nice= nice +Specify what is considered to be a nice length for a match. +Once a match of at least +.I nice +bytes is found, the algorithm stops +looking for possibly better matches. +.IP "" +.I Nice +can be 2\(en273 bytes. +Higher values tend to give better compression ratio +at the expense of speed. +The default depends on the +.IR preset . +.TP +.BI depth= depth +Specify the maximum search depth in the match finder. +The default is the special value of 0, +which makes the compressor determine a reasonable +.I depth +from +.I mf +and +.IR nice . +.IP "" +Reasonable +.I depth +for Hash Chains is 4\(en100 and 16\(en1000 for Binary Trees. +Using very high values for +.I depth +can make the encoder extremely slow with some files. +Avoid setting the +.I depth +over 1000 unless you are prepared to interrupt +the compression in case it is taking far too long. +.RE +.IP "" +When decoding raw streams +.RB ( \-\-format=raw ), +LZMA2 needs only the dictionary +.IR size . +LZMA1 needs also +.IR lc , +.IR lp , +and +.IR pb . +.TP +\fB\-\-x86\fR[\fB=\fIoptions\fR] +.PD 0 +.TP +\fB\-\-arm\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-armthumb\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-arm64\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-powerpc\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-ia64\fR[\fB=\fIoptions\fR] +.TP +\fB\-\-sparc\fR[\fB=\fIoptions\fR] +.PD +Add a branch/call/jump (BCJ) filter to the filter chain. +These filters can be used only as a non-last filter +in the filter chain. +.IP "" +A BCJ filter converts relative addresses in +the machine code to their absolute counterparts. +This doesn't change the size of the data +but it increases redundancy, +which can help LZMA2 to produce 0\(en15\ % smaller +.B .xz +file. +The BCJ filters are always reversible, +so using a BCJ filter for wrong type of data +doesn't cause any data loss, although it may make +the compression ratio slightly worse. +The BCJ filters are very fast and +use an insignificant amount of memory. +.IP "" +These BCJ filters have known problems related to +the compression ratio: +.RS +.IP \(bu 3 +Some types of files containing executable code +(for example, object files, static libraries, and Linux kernel modules) +have the addresses in the instructions filled with filler values. +These BCJ filters will still do the address conversion, +which will make the compression worse with these files. +.IP \(bu 3 +If a BCJ filter is applied on an archive, +it is possible that it makes the compression ratio +worse than not using a BCJ filter. +For example, if there are similar or even identical executables +then filtering will likely make the files less similar +and thus compression is worse. +The contents of non-executable files in the same archive can matter too. +In practice one has to try with and without a BCJ filter to see +which is better in each situation. +.RE +.IP "" +Different instruction sets have different alignment: +the executable file must be aligned to a multiple of +this value in the input data to make the filter work. +.RS +.RS +.PP +.TS +tab(;); +l n l +l n l. +Filter;Alignment;Notes +x86;1;32-bit or 64-bit x86 +ARM;4; +ARM-Thumb;2; +ARM64;4;4096-byte alignment is best +PowerPC;4;Big endian only +IA-64;16;Itanium +SPARC;4; +.TE +.RE +.RE +.IP "" +Since the BCJ-filtered data is usually compressed with LZMA2, +the compression ratio may be improved slightly if +the LZMA2 options are set to match the +alignment of the selected BCJ filter. +For example, with the IA-64 filter, it's good to set +.B pb=4 +or even +.B pb=4,lp=4,lc=0 +with LZMA2 (2^4=16). +The x86 filter is an exception; +it's usually good to stick to LZMA2's default +four-byte alignment when compressing x86 executables. +.IP "" +All BCJ filters support the same +.IR options : +.RS +.TP +.BI start= offset +Specify the start +.I offset +that is used when converting between relative +and absolute addresses. +The +.I offset +must be a multiple of the alignment of the filter +(see the table above). +The default is zero. +In practice, the default is good; specifying a custom +.I offset +is almost never useful. +.RE +.TP +\fB\-\-delta\fR[\fB=\fIoptions\fR] +Add the Delta filter to the filter chain. +The Delta filter can be only used as a non-last filter +in the filter chain. +.IP "" +Currently only simple byte-wise delta calculation is supported. +It can be useful when compressing, for example, uncompressed bitmap images +or uncompressed PCM audio. +However, special purpose algorithms may give significantly better +results than Delta + LZMA2. +This is true especially with audio, +which compresses faster and better, for example, with +.BR flac (1). +.IP "" +Supported +.IR options : +.RS +.TP +.BI dist= distance +Specify the +.I distance +of the delta calculation in bytes. +.I distance +must be 1\(en256. +The default is 1. +.IP "" +For example, with +.B dist=2 +and eight-byte input A1 B1 A2 B3 A3 B5 A4 B7, the output will be +A1 B1 01 02 01 02 01 02. +.RE +. +.SS "Other options" +.TP +.BR \-q ", " \-\-quiet +Suppress warnings and notices. +Specify this twice to suppress errors too. +This option has no effect on the exit status. +That is, even if a warning was suppressed, +the exit status to indicate a warning is still used. +.TP +.BR \-v ", " \-\-verbose +Be verbose. +If standard error is connected to a terminal, +.B xz +will display a progress indicator. +Specifying +.B \-\-verbose +twice will give even more verbose output. +.IP "" +The progress indicator shows the following information: +.RS +.IP \(bu 3 +Completion percentage is shown +if the size of the input file is known. +That is, the percentage cannot be shown in pipes. +.IP \(bu 3 +Amount of compressed data produced (compressing) +or consumed (decompressing). +.IP \(bu 3 +Amount of uncompressed data consumed (compressing) +or produced (decompressing). +.IP \(bu 3 +Compression ratio, which is calculated by dividing +the amount of compressed data processed so far by +the amount of uncompressed data processed so far. +.IP \(bu 3 +Compression or decompression speed. +This is measured as the amount of uncompressed data consumed +(compression) or produced (decompression) per second. +It is shown after a few seconds have passed since +.B xz +started processing the file. +.IP \(bu 3 +Elapsed time in the format M:SS or H:MM:SS. +.IP \(bu 3 +Estimated remaining time is shown +only when the size of the input file is +known and a couple of seconds have already passed since +.B xz +started processing the file. +The time is shown in a less precise format which +never has any colons, for example, 2 min 30 s. +.RE +.IP "" +When standard error is not a terminal, +.B \-\-verbose +will make +.B xz +print the filename, compressed size, uncompressed size, +compression ratio, and possibly also the speed and elapsed time +on a single line to standard error after compressing or +decompressing the file. +The speed and elapsed time are included only when +the operation took at least a few seconds. +If the operation didn't finish, for example, due to user interruption, +also the completion percentage is printed +if the size of the input file is known. +.TP +.BR \-Q ", " \-\-no\-warn +Don't set the exit status to 2 +even if a condition worth a warning was detected. +This option doesn't affect the verbosity level, thus both +.B \-\-quiet +and +.B \-\-no\-warn +have to be used to not display warnings and +to not alter the exit status. +.TP +.B \-\-robot +Print messages in a machine-parsable format. +This is intended to ease writing frontends that want to use +.B xz +instead of liblzma, which may be the case with various scripts. +The output with this option enabled is meant to be stable across +.B xz +releases. +See the section +.B "ROBOT MODE" +for details. +.TP +.B \-\-info\-memory +Display, in human-readable format, how much physical memory (RAM) +and how many processor threads +.B xz +thinks the system has and the memory usage limits for compression +and decompression, and exit successfully. +.TP +.BR \-h ", " \-\-help +Display a help message describing the most commonly used options, +and exit successfully. +.TP +.BR \-H ", " \-\-long\-help +Display a help message describing all features of +.BR xz , +and exit successfully +.TP +.BR \-V ", " \-\-version +Display the version number of +.B xz +and liblzma in human readable format. +To get machine-parsable output, specify +.B \-\-robot +before +.BR \-\-version . +. +.SH "ROBOT MODE" +The robot mode is activated with the +.B \-\-robot +option. +It makes the output of +.B xz +easier to parse by other programs. +Currently +.B \-\-robot +is supported only together with +.BR \-\-version , +.BR \-\-info\-memory , +and +.BR \-\-list . +It will be supported for compression and +decompression in the future. +. +.SS Version +.B "xz \-\-robot \-\-version" +will print the version number of +.B xz +and liblzma in the following format: +.PP +.BI XZ_VERSION= XYYYZZZS +.br +.BI LIBLZMA_VERSION= XYYYZZZS +.TP +.I X +Major version. +.TP +.I YYY +Minor version. +Even numbers are stable. +Odd numbers are alpha or beta versions. +.TP +.I ZZZ +Patch level for stable releases or +just a counter for development releases. +.TP +.I S +Stability. +0 is alpha, 1 is beta, and 2 is stable. +.I S +should be always 2 when +.I YYY +is even. +.PP +.I XYYYZZZS +are the same on both lines if +.B xz +and liblzma are from the same XZ Utils release. +.PP +Examples: 4.999.9beta is +.B 49990091 +and +5.0.0 is +.BR 50000002 . +. +.SS "Memory limit information" +.B "xz \-\-robot \-\-info\-memory" +prints a single line with three tab-separated columns: +.IP 1. 4 +Total amount of physical memory (RAM) in bytes. +.IP 2. 4 +Memory usage limit for compression in bytes +.RB ( \-\-memlimit\-compress ). +A special value of +.B 0 +indicates the default setting +which for single-threaded mode is the same as no limit. +.IP 3. 4 +Memory usage limit for decompression in bytes +.RB ( \-\-memlimit\-decompress ). +A special value of +.B 0 +indicates the default setting +which for single-threaded mode is the same as no limit. +.IP 4. 4 +Since +.B xz +5.3.4alpha: +Memory usage for multi-threaded decompression in bytes +.RB ( \-\-memlimit\-mt\-decompress ). +This is never zero because a system-specific default value +shown in the column 5 +is used if no limit has been specified explicitly. +This is also never greater than the value in the column 3 +even if a larger value has been specified with +.BR \-\-memlimit\-mt\-decompress . +.IP 5. 4 +Since +.B xz +5.3.4alpha: +A system-specific default memory usage limit +that is used to limit the number of threads +when compressing with an automatic number of threads +.RB ( \-\-threads=0 ) +and no memory usage limit has been specified +.RB ( \-\-memlimit\-compress ). +This is also used as the default value for +.BR \-\-memlimit\-mt\-decompress . +.IP 6. 4 +Since +.B xz +5.3.4alpha: +Number of available processor threads. +.PP +In the future, the output of +.B "xz \-\-robot \-\-info\-memory" +may have more columns, but never more than a single line. +. +.SS "List mode" +.B "xz \-\-robot \-\-list" +uses tab-separated output. +The first column of every line has a string +that indicates the type of the information found on that line: +.TP +.B name +This is always the first line when starting to list a file. +The second column on the line is the filename. +.TP +.B file +This line contains overall information about the +.B .xz +file. +This line is always printed after the +.B name +line. +.TP +.B stream +This line type is used only when +.B \-\-verbose +was specified. +There are as many +.B stream +lines as there are streams in the +.B .xz +file. +.TP +.B block +This line type is used only when +.B \-\-verbose +was specified. +There are as many +.B block +lines as there are blocks in the +.B .xz +file. +The +.B block +lines are shown after all the +.B stream +lines; different line types are not interleaved. +.TP +.B summary +This line type is used only when +.B \-\-verbose +was specified twice. +This line is printed after all +.B block +lines. +Like the +.B file +line, the +.B summary +line contains overall information about the +.B .xz +file. +.TP +.B totals +This line is always the very last line of the list output. +It shows the total counts and sizes. +.PP +The columns of the +.B file +lines: +.PD 0 +.RS +.IP 2. 4 +Number of streams in the file +.IP 3. 4 +Total number of blocks in the stream(s) +.IP 4. 4 +Compressed size of the file +.IP 5. 4 +Uncompressed size of the file +.IP 6. 4 +Compression ratio, for example, +.BR 0.123 . +If ratio is over 9.999, three dashes +.RB ( \-\-\- ) +are displayed instead of the ratio. +.IP 7. 4 +Comma-separated list of integrity check names. +The following strings are used for the known check types: +.BR None , +.BR CRC32 , +.BR CRC64 , +and +.BR SHA\-256 . +For unknown check types, +.BI Unknown\- N +is used, where +.I N +is the Check ID as a decimal number (one or two digits). +.IP 8. 4 +Total size of stream padding in the file +.RE +.PD +.PP +The columns of the +.B stream +lines: +.PD 0 +.RS +.IP 2. 4 +Stream number (the first stream is 1) +.IP 3. 4 +Number of blocks in the stream +.IP 4. 4 +Compressed start offset +.IP 5. 4 +Uncompressed start offset +.IP 6. 4 +Compressed size (does not include stream padding) +.IP 7. 4 +Uncompressed size +.IP 8. 4 +Compression ratio +.IP 9. 4 +Name of the integrity check +.IP 10. 4 +Size of stream padding +.RE +.PD +.PP +The columns of the +.B block +lines: +.PD 0 +.RS +.IP 2. 4 +Number of the stream containing this block +.IP 3. 4 +Block number relative to the beginning of the stream +(the first block is 1) +.IP 4. 4 +Block number relative to the beginning of the file +.IP 5. 4 +Compressed start offset relative to the beginning of the file +.IP 6. 4 +Uncompressed start offset relative to the beginning of the file +.IP 7. 4 +Total compressed size of the block (includes headers) +.IP 8. 4 +Uncompressed size +.IP 9. 4 +Compression ratio +.IP 10. 4 +Name of the integrity check +.RE +.PD +.PP +If +.B \-\-verbose +was specified twice, additional columns are included on the +.B block +lines. +These are not displayed with a single +.BR \-\-verbose , +because getting this information requires many seeks +and can thus be slow: +.PD 0 +.RS +.IP 11. 4 +Value of the integrity check in hexadecimal +.IP 12. 4 +Block header size +.IP 13. 4 +Block flags: +.B c +indicates that compressed size is present, and +.B u +indicates that uncompressed size is present. +If the flag is not set, a dash +.RB ( \- ) +is shown instead to keep the string length fixed. +New flags may be added to the end of the string in the future. +.IP 14. 4 +Size of the actual compressed data in the block (this excludes +the block header, block padding, and check fields) +.IP 15. 4 +Amount of memory (in bytes) required to decompress +this block with this +.B xz +version +.IP 16. 4 +Filter chain. +Note that most of the options used at compression time +cannot be known, because only the options +that are needed for decompression are stored in the +.B .xz +headers. +.RE +.PD +.PP +The columns of the +.B summary +lines: +.PD 0 +.RS +.IP 2. 4 +Amount of memory (in bytes) required to decompress +this file with this +.B xz +version +.IP 3. 4 +.B yes +or +.B no +indicating if all block headers have both compressed size and +uncompressed size stored in them +.PP +.I Since +.B xz +.I 5.1.2alpha: +.IP 4. 4 +Minimum +.B xz +version required to decompress the file +.RE +.PD +.PP +The columns of the +.B totals +line: +.PD 0 +.RS +.IP 2. 4 +Number of streams +.IP 3. 4 +Number of blocks +.IP 4. 4 +Compressed size +.IP 5. 4 +Uncompressed size +.IP 6. 4 +Average compression ratio +.IP 7. 4 +Comma-separated list of integrity check names +that were present in the files +.IP 8. 4 +Stream padding size +.IP 9. 4 +Number of files. +This is here to +keep the order of the earlier columns the same as on +.B file +lines. +.PD +.RE +.PP +If +.B \-\-verbose +was specified twice, additional columns are included on the +.B totals +line: +.PD 0 +.RS +.IP 10. 4 +Maximum amount of memory (in bytes) required to decompress +the files with this +.B xz +version +.IP 11. 4 +.B yes +or +.B no +indicating if all block headers have both compressed size and +uncompressed size stored in them +.PP +.I Since +.B xz +.I 5.1.2alpha: +.IP 12. 4 +Minimum +.B xz +version required to decompress the file +.RE +.PD +.PP +Future versions may add new line types and +new columns can be added to the existing line types, +but the existing columns won't be changed. +. +.SH "EXIT STATUS" +.TP +.B 0 +All is good. +.TP +.B 1 +An error occurred. +.TP +.B 2 +Something worth a warning occurred, +but no actual errors occurred. +.PP +Notices (not warnings or errors) printed on standard error +don't affect the exit status. +. +.SH ENVIRONMENT +.B xz +parses space-separated lists of options +from the environment variables +.B XZ_DEFAULTS +and +.BR XZ_OPT , +in this order, before parsing the options from the command line. +Note that only options are parsed from the environment variables; +all non-options are silently ignored. +Parsing is done with +.BR getopt_long (3) +which is used also for the command line arguments. +.TP +.B XZ_DEFAULTS +User-specific or system-wide default options. +Typically this is set in a shell initialization script to enable +.BR xz 's +memory usage limiter by default. +Excluding shell initialization scripts +and similar special cases, scripts must never set or unset +.BR XZ_DEFAULTS . +.TP +.B XZ_OPT +This is for passing options to +.B xz +when it is not possible to set the options directly on the +.B xz +command line. +This is the case when +.B xz +is run by a script or tool, for example, GNU +.BR tar (1): +.RS +.RS +.PP +.nf +.ft CW +XZ_OPT=\-2v tar caf foo.tar.xz foo +.ft R +.fi +.RE +.RE +.IP "" +Scripts may use +.BR XZ_OPT , +for example, to set script-specific default compression options. +It is still recommended to allow users to override +.B XZ_OPT +if that is reasonable. +For example, in +.BR sh (1) +scripts one may use something like this: +.RS +.RS +.PP +.nf +.ft CW +XZ_OPT=${XZ_OPT\-"\-7e"} +export XZ_OPT +.ft R +.fi +.RE +.RE +. +.SH "LZMA UTILS COMPATIBILITY" +The command line syntax of +.B xz +is practically a superset of +.BR lzma , +.BR unlzma , +and +.B lzcat +as found from LZMA Utils 4.32.x. +In most cases, it is possible to replace +LZMA Utils with XZ Utils without breaking existing scripts. +There are some incompatibilities though, +which may sometimes cause problems. +. +.SS "Compression preset levels" +The numbering of the compression level presets is not identical in +.B xz +and LZMA Utils. +The most important difference is how dictionary sizes +are mapped to different presets. +Dictionary size is roughly equal to the decompressor memory usage. +.RS +.PP +.TS +tab(;); +c c c +c n n. +Level;xz;LZMA Utils +\-0;256 KiB;N/A +\-1;1 MiB;64 KiB +\-2;2 MiB;1 MiB +\-3;4 MiB;512 KiB +\-4;4 MiB;1 MiB +\-5;8 MiB;2 MiB +\-6;8 MiB;4 MiB +\-7;16 MiB;8 MiB +\-8;32 MiB;16 MiB +\-9;64 MiB;32 MiB +.TE +.RE +.PP +The dictionary size differences affect +the compressor memory usage too, +but there are some other differences between +LZMA Utils and XZ Utils, which +make the difference even bigger: +.RS +.PP +.TS +tab(;); +c c c +c n n. +Level;xz;LZMA Utils 4.32.x +\-0;3 MiB;N/A +\-1;9 MiB;2 MiB +\-2;17 MiB;12 MiB +\-3;32 MiB;12 MiB +\-4;48 MiB;16 MiB +\-5;94 MiB;26 MiB +\-6;94 MiB;45 MiB +\-7;186 MiB;83 MiB +\-8;370 MiB;159 MiB +\-9;674 MiB;311 MiB +.TE +.RE +.PP +The default preset level in LZMA Utils is +.B \-7 +while in XZ Utils it is +.BR \-6 , +so both use an 8 MiB dictionary by default. +. +.SS "Streamed vs. non-streamed .lzma files" +The uncompressed size of the file can be stored in the +.B .lzma +header. +LZMA Utils does that when compressing regular files. +The alternative is to mark that uncompressed size is unknown +and use end-of-payload marker to indicate +where the decompressor should stop. +LZMA Utils uses this method when uncompressed size isn't known, +which is the case, for example, in pipes. +.PP +.B xz +supports decompressing +.B .lzma +files with or without end-of-payload marker, but all +.B .lzma +files created by +.B xz +will use end-of-payload marker and have uncompressed size +marked as unknown in the +.B .lzma +header. +This may be a problem in some uncommon situations. +For example, a +.B .lzma +decompressor in an embedded device might work +only with files that have known uncompressed size. +If you hit this problem, you need to use LZMA Utils +or LZMA SDK to create +.B .lzma +files with known uncompressed size. +. +.SS "Unsupported .lzma files" +The +.B .lzma +format allows +.I lc +values up to 8, and +.I lp +values up to 4. +LZMA Utils can decompress files with any +.I lc +and +.IR lp , +but always creates files with +.B lc=3 +and +.BR lp=0 . +Creating files with other +.I lc +and +.I lp +is possible with +.B xz +and with LZMA SDK. +.PP +The implementation of the LZMA1 filter in liblzma +requires that the sum of +.I lc +and +.I lp +must not exceed 4. +Thus, +.B .lzma +files, which exceed this limitation, cannot be decompressed with +.BR xz . +.PP +LZMA Utils creates only +.B .lzma +files which have a dictionary size of +.RI "2^" n +(a power of 2) but accepts files with any dictionary size. +liblzma accepts only +.B .lzma +files which have a dictionary size of +.RI "2^" n +or +.RI "2^" n " + 2^(" n "\-1)." +This is to decrease false positives when detecting +.B .lzma +files. +.PP +These limitations shouldn't be a problem in practice, +since practically all +.B .lzma +files have been compressed with settings that liblzma will accept. +. +.SS "Trailing garbage" +When decompressing, +LZMA Utils silently ignore everything after the first +.B .lzma +stream. +In most situations, this is a bug. +This also means that LZMA Utils +don't support decompressing concatenated +.B .lzma +files. +.PP +If there is data left after the first +.B .lzma +stream, +.B xz +considers the file to be corrupt unless +.B \-\-single\-stream +was used. +This may break obscure scripts which have +assumed that trailing garbage is ignored. +. +.SH NOTES +. +.SS "Compressed output may vary" +The exact compressed output produced from +the same uncompressed input file +may vary between XZ Utils versions even if +compression options are identical. +This is because the encoder can be improved +(faster or better compression) +without affecting the file format. +The output can vary even between different +builds of the same XZ Utils version, +if different build options are used. +.PP +The above means that once +.B \-\-rsyncable +has been implemented, +the resulting files won't necessarily be rsyncable +unless both old and new files have been compressed +with the same xz version. +This problem can be fixed if a part of the encoder +implementation is frozen to keep rsyncable output +stable across xz versions. +. +.SS "Embedded .xz decompressors" +Embedded +.B .xz +decompressor implementations like XZ Embedded don't necessarily +support files created with integrity +.I check +types other than +.B none +and +.BR crc32 . +Since the default is +.BR \-\-check=crc64 , +you must use +.B \-\-check=none +or +.B \-\-check=crc32 +when creating files for embedded systems. +.PP +Outside embedded systems, all +.B .xz +format decompressors support all the +.I check +types, or at least are able to decompress +the file without verifying the +integrity check if the particular +.I check +is not supported. +.PP +XZ Embedded supports BCJ filters, +but only with the default start offset. +. +.SH EXAMPLES +. +.SS Basics +Compress the file +.I foo +into +.I foo.xz +using the default compression level +.RB ( \-6 ), +and remove +.I foo +if compression is successful: +.RS +.PP +.nf +.ft CW +xz foo +.ft R +.fi +.RE +.PP +Decompress +.I bar.xz +into +.I bar +and don't remove +.I bar.xz +even if decompression is successful: +.RS +.PP +.nf +.ft CW +xz \-dk bar.xz +.ft R +.fi +.RE +.PP +Create +.I baz.tar.xz +with the preset +.B \-4e +.RB ( "\-4 \-\-extreme" ), +which is slower than the default +.BR \-6 , +but needs less memory for compression and decompression (48\ MiB +and 5\ MiB, respectively): +.RS +.PP +.nf +.ft CW +tar cf \- baz | xz \-4e > baz.tar.xz +.ft R +.fi +.RE +.PP +A mix of compressed and uncompressed files can be decompressed +to standard output with a single command: +.RS +.PP +.nf +.ft CW +xz \-dcf a.txt b.txt.xz c.txt d.txt.lzma > abcd.txt +.ft R +.fi +.RE +. +.SS "Parallel compression of many files" +On GNU and *BSD, +.BR find (1) +and +.BR xargs (1) +can be used to parallelize compression of many files: +.RS +.PP +.nf +.ft CW +find . \-type f \e! \-name '*.xz' \-print0 \e + | xargs \-0r \-P4 \-n16 xz \-T1 +.ft R +.fi +.RE +.PP +The +.B \-P +option to +.BR xargs (1) +sets the number of parallel +.B xz +processes. +The best value for the +.B \-n +option depends on how many files there are to be compressed. +If there are only a couple of files, +the value should probably be 1; +with tens of thousands of files, +100 or even more may be appropriate to reduce the number of +.B xz +processes that +.BR xargs (1) +will eventually create. +.PP +The option +.B \-T1 +for +.B xz +is there to force it to single-threaded mode, because +.BR xargs (1) +is used to control the amount of parallelization. +. +.SS "Robot mode" +Calculate how many bytes have been saved in total +after compressing multiple files: +.RS +.PP +.nf +.ft CW +xz \-\-robot \-\-list *.xz | awk '/^totals/{print $5\-$4}' +.ft R +.fi +.RE +.PP +A script may want to know that it is using new enough +.BR xz . +The following +.BR sh (1) +script checks that the version number of the +.B xz +tool is at least 5.0.0. +This method is compatible with old beta versions, +which didn't support the +.B \-\-robot +option: +.RS +.PP +.nf +.ft CW +if ! eval "$(xz \-\-robot \-\-version 2> /dev/null)" || + [ "$XZ_VERSION" \-lt 50000002 ]; then + echo "Your xz is too old." +fi +unset XZ_VERSION LIBLZMA_VERSION +.ft R +.fi +.RE +.PP +Set a memory usage limit for decompression using +.BR XZ_OPT , +but if a limit has already been set, don't increase it: +.RS +.PP +.nf +.ft CW +NEWLIM=$((123 << 20))\ \ # 123 MiB +OLDLIM=$(xz \-\-robot \-\-info\-memory | cut \-f3) +if [ $OLDLIM \-eq 0 \-o $OLDLIM \-gt $NEWLIM ]; then + XZ_OPT="$XZ_OPT \-\-memlimit\-decompress=$NEWLIM" + export XZ_OPT +fi +.ft R +.fi +.RE +. +.SS "Custom compressor filter chains" +The simplest use for custom filter chains is +customizing a LZMA2 preset. +This can be useful, +because the presets cover only a subset of the +potentially useful combinations of compression settings. +.PP +The CompCPU columns of the tables +from the descriptions of the options +.BR "\-0" " ... " "\-9" +and +.B \-\-extreme +are useful when customizing LZMA2 presets. +Here are the relevant parts collected from those two tables: +.RS +.PP +.TS +tab(;); +c c +n n. +Preset;CompCPU +\-0;0 +\-1;1 +\-2;2 +\-3;3 +\-4;4 +\-5;5 +\-6;6 +\-5e;7 +\-6e;8 +.TE +.RE +.PP +If you know that a file requires +somewhat big dictionary (for example, 32\ MiB) to compress well, +but you want to compress it quicker than +.B "xz \-8" +would do, a preset with a low CompCPU value (for example, 1) +can be modified to use a bigger dictionary: +.RS +.PP +.nf +.ft CW +xz \-\-lzma2=preset=1,dict=32MiB foo.tar +.ft R +.fi +.RE +.PP +With certain files, the above command may be faster than +.B "xz \-6" +while compressing significantly better. +However, it must be emphasized that only some files benefit from +a big dictionary while keeping the CompCPU value low. +The most obvious situation, +where a big dictionary can help a lot, +is an archive containing very similar files +of at least a few megabytes each. +The dictionary size has to be significantly bigger +than any individual file to allow LZMA2 to take +full advantage of the similarities between consecutive files. +.PP +If very high compressor and decompressor memory usage is fine, +and the file being compressed is +at least several hundred megabytes, it may be useful +to use an even bigger dictionary than the 64 MiB that +.B "xz \-9" +would use: +.RS +.PP +.nf +.ft CW +xz \-vv \-\-lzma2=dict=192MiB big_foo.tar +.ft R +.fi +.RE +.PP +Using +.B \-vv +.RB ( "\-\-verbose \-\-verbose" ) +like in the above example can be useful +to see the memory requirements +of the compressor and decompressor. +Remember that using a dictionary bigger than +the size of the uncompressed file is waste of memory, +so the above command isn't useful for small files. +.PP +Sometimes the compression time doesn't matter, +but the decompressor memory usage has to be kept low, for example, +to make it possible to decompress the file on an embedded system. +The following command uses +.B \-6e +.RB ( "\-6 \-\-extreme" ) +as a base and sets the dictionary to only 64\ KiB. +The resulting file can be decompressed with XZ Embedded +(that's why there is +.BR \-\-check=crc32 ) +using about 100\ KiB of memory. +.RS +.PP +.nf +.ft CW +xz \-\-check=crc32 \-\-lzma2=preset=6e,dict=64KiB foo +.ft R +.fi +.RE +.PP +If you want to squeeze out as many bytes as possible, +adjusting the number of literal context bits +.RI ( lc ) +and number of position bits +.RI ( pb ) +can sometimes help. +Adjusting the number of literal position bits +.RI ( lp ) +might help too, but usually +.I lc +and +.I pb +are more important. +For example, a source code archive contains mostly US-ASCII text, +so something like the following might give +slightly (like 0.1\ %) smaller file than +.B "xz \-6e" +(try also without +.BR lc=4 ): +.RS +.PP +.nf +.ft CW +xz \-\-lzma2=preset=6e,pb=0,lc=4 source_code.tar +.ft R +.fi +.RE +.PP +Using another filter together with LZMA2 can improve +compression with certain file types. +For example, to compress a x86-32 or x86-64 shared library +using the x86 BCJ filter: +.RS +.PP +.nf +.ft CW +xz \-\-x86 \-\-lzma2 libfoo.so +.ft R +.fi +.RE +.PP +Note that the order of the filter options is significant. +If +.B \-\-x86 +is specified after +.BR \-\-lzma2 , +.B xz +will give an error, +because there cannot be any filter after LZMA2, +and also because the x86 BCJ filter cannot be used +as the last filter in the chain. +.PP +The Delta filter together with LZMA2 +can give good results with bitmap images. +It should usually beat PNG, +which has a few more advanced filters than simple +delta but uses Deflate for the actual compression. +.PP +The image has to be saved in uncompressed format, +for example, as uncompressed TIFF. +The distance parameter of the Delta filter is set +to match the number of bytes per pixel in the image. +For example, 24-bit RGB bitmap needs +.BR dist=3 , +and it is also good to pass +.B pb=0 +to LZMA2 to accommodate the three-byte alignment: +.RS +.PP +.nf +.ft CW +xz \-\-delta=dist=3 \-\-lzma2=pb=0 foo.tiff +.ft R +.fi +.RE +.PP +If multiple images have been put into a single archive (for example, +.BR .tar ), +the Delta filter will work on that too as long as all images +have the same number of bytes per pixel. +. +.SH "SEE ALSO" +.BR xzdec (1), +.BR xzdiff (1), +.BR xzgrep (1), +.BR xzless (1), +.BR xzmore (1), +.BR gzip (1), +.BR bzip2 (1), +.BR 7z (1) +.PP +XZ Utils: +.br +XZ Embedded: +.br +LZMA SDK: diff --git a/src/xz/xz_w32res.rc b/src/xz/xz_w32res.rc new file mode 100644 index 0000000..bad3020 --- /dev/null +++ b/src/xz/xz_w32res.rc @@ -0,0 +1,12 @@ +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#define MY_TYPE VFT_APP +#define MY_NAME "xz" +#define MY_SUFFIX ".exe" +#define MY_DESC "xz data compression tool for .xz and .lzma files" +#include "common_w32res.rc" diff --git a/src/xzdec/Makefile.am b/src/xzdec/Makefile.am new file mode 100644 index 0000000..90f1e92 --- /dev/null +++ b/src/xzdec/Makefile.am @@ -0,0 +1,111 @@ +## +## Author: Lasse Collin +## +## This file has been put into the public domain. +## You can do whatever you want with this file. +## + +# Windows resource compiler support. It's fine to use xz_CPPFLAGS +# also for lzmadec. +.rc.o: + $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(xzdec_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@ + + +xzdec_SOURCES = \ + xzdec.c \ + ../common/tuklib_progname.c \ + ../common/tuklib_exit.c + +if COND_W32 +xzdec_SOURCES += xzdec_w32res.rc +endif + +xzdec_CPPFLAGS = \ + -DTUKLIB_GETTEXT=0 \ + -I$(top_srcdir)/src/common \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_builddir)/lib +xzdec_LDADD = $(top_builddir)/src/liblzma/liblzma.la + +if COND_GNULIB +xzdec_LDADD += $(top_builddir)/lib/libgnu.a +endif + +xzdec_LDADD += $(LTLIBINTL) + + +lzmadec_SOURCES = \ + xzdec.c \ + ../common/tuklib_progname.c \ + ../common/tuklib_exit.c + +if COND_W32 +lzmadec_SOURCES += lzmadec_w32res.rc +endif + +lzmadec_CPPFLAGS = $(xzdec_CPPFLAGS) -DLZMADEC +lzmadec_LDFLAGS = $(xzdec_LDFLAGS) +lzmadec_LDADD = $(xzdec_LDADD) + + +bin_PROGRAMS = +lzmadecmanlink = + +if COND_XZDEC +bin_PROGRAMS += xzdec +dist_man_MANS = xzdec.1 +endif + +if COND_LZMADEC +bin_PROGRAMS += lzmadec + +# Create the symlink lzmadec.1->xzdec.1 only if xzdec.1 was installed. +# This is better than creating a dangling symlink. The correct solution +# would be to install xzdec.1 as lzmadec.1 but this code is already too +# complicated so I won't do it. Installing only lzmadec is a bit unusual +# situation anyway so it's not that important. +if COND_XZDEC +lzmadecmanlink += lzmadec +endif +endif + +if COND_XZDEC +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. +install-data-hook: + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + target=`echo xzdec | sed '$(transform)'` && \ + link=`echo lzmadec | sed '$(transform)'` && \ + for lang in . $$languages; do \ + man="$(top_srcdir)/po4a/man/$$lang/xzdec.1" ; \ + if test -f "$$man"; then \ + $(MAKE) dist_man_MANS="$$man" man_MANS= \ + mandir="$(mandir)/$$lang" install-man; \ + fi; \ + man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ + if test -f "$$man1dir/$$target.1"; then \ + if test -n "$(lzmadecmanlink)"; then ( \ + cd "$$man1dir" && \ + rm -f "$$link.1" && \ + $(LN_S) "$$target.1" "$$link.1" \ + ); fi; \ + fi; \ + done + +uninstall-hook: + languages= ; \ + if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ + languages=`ls "$(top_srcdir)/po4a/man"`; \ + fi; \ + for lang in . $$languages; do \ + for name in xzdec $(lzmadecmanlink); do \ + name=`echo $$name | sed '$(transform)'` && \ + rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$name.1"; \ + done; \ + done +endif diff --git a/src/xzdec/Makefile.in b/src/xzdec/Makefile.in new file mode 100644 index 0000000..b05cff1 --- /dev/null +++ b/src/xzdec/Makefile.in @@ -0,0 +1,969 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@COND_W32_TRUE@am__append_1 = xzdec_w32res.rc +@COND_GNULIB_TRUE@am__append_2 = $(top_builddir)/lib/libgnu.a +@COND_W32_TRUE@am__append_3 = lzmadec_w32res.rc +bin_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2) +@COND_XZDEC_TRUE@am__append_4 = xzdec +@COND_LZMADEC_TRUE@am__append_5 = lzmadec + +# Create the symlink lzmadec.1->xzdec.1 only if xzdec.1 was installed. +# This is better than creating a dangling symlink. The correct solution +# would be to install xzdec.1 as lzmadec.1 but this code is already too +# complicated so I won't do it. Installing only lzmadec is a bit unusual +# situation anyway so it's not that important. +@COND_LZMADEC_TRUE@@COND_XZDEC_TRUE@am__append_6 = lzmadec +subdir = src/xzdec +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_capsicum.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/getopt.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/posix-shell.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/tuklib_common.m4 \ + $(top_srcdir)/m4/tuklib_cpucores.m4 \ + $(top_srcdir)/m4/tuklib_integer.m4 \ + $(top_srcdir)/m4/tuklib_mbstr.m4 \ + $(top_srcdir)/m4/tuklib_physmem.m4 \ + $(top_srcdir)/m4/tuklib_progname.m4 \ + $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +@COND_XZDEC_TRUE@am__EXEEXT_1 = xzdec$(EXEEXT) +@COND_LZMADEC_TRUE@am__EXEEXT_2 = lzmadec$(EXEEXT) +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" +PROGRAMS = $(bin_PROGRAMS) +am__lzmadec_SOURCES_DIST = xzdec.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c lzmadec_w32res.rc +@COND_W32_TRUE@am__objects_1 = lzmadec_w32res.$(OBJEXT) +am_lzmadec_OBJECTS = lzmadec-xzdec.$(OBJEXT) \ + lzmadec-tuklib_progname.$(OBJEXT) \ + lzmadec-tuklib_exit.$(OBJEXT) $(am__objects_1) +lzmadec_OBJECTS = $(am_lzmadec_OBJECTS) +am__DEPENDENCIES_1 = +am__DEPENDENCIES_2 = $(top_builddir)/src/liblzma/liblzma.la \ + $(am__append_2) $(am__DEPENDENCIES_1) +lzmadec_DEPENDENCIES = $(am__DEPENDENCIES_2) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +lzmadec_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(lzmadec_LDFLAGS) $(LDFLAGS) -o $@ +am__xzdec_SOURCES_DIST = xzdec.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c xzdec_w32res.rc +@COND_W32_TRUE@am__objects_2 = xzdec_w32res.$(OBJEXT) +am_xzdec_OBJECTS = xzdec-xzdec.$(OBJEXT) \ + xzdec-tuklib_progname.$(OBJEXT) xzdec-tuklib_exit.$(OBJEXT) \ + $(am__objects_2) +xzdec_OBJECTS = $(am_xzdec_OBJECTS) +xzdec_DEPENDENCIES = $(top_builddir)/src/liblzma/liblzma.la \ + $(am__append_2) $(am__DEPENDENCIES_1) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/lzmadec-tuklib_exit.Po \ + ./$(DEPDIR)/lzmadec-tuklib_progname.Po \ + ./$(DEPDIR)/lzmadec-xzdec.Po ./$(DEPDIR)/xzdec-tuklib_exit.Po \ + ./$(DEPDIR)/xzdec-tuklib_progname.Po \ + ./$(DEPDIR)/xzdec-xzdec.Po +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(lzmadec_SOURCES) $(xzdec_SOURCES) +DIST_SOURCES = $(am__lzmadec_SOURCES_DIST) $(am__xzdec_SOURCES_DIST) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(dist_man_MANS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \ + $(top_srcdir)/build-aux/depcomp +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAPSICUM_LIB = @CAPSICUM_LIB@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +GETOPT_H = @GETOPT_H@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +HAVE_VISIBILITY = @HAVE_VISIBILITY@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_EXEEXT = @LN_EXEEXT@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ +POSUB = @POSUB@ +PREFERABLY_POSIX_SHELL = @PREFERABLY_POSIX_SHELL@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +enable_path_for_scripts = @enable_path_for_scripts@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xz = @xz@ +xzdec_SOURCES = xzdec.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c $(am__append_1) +xzdec_CPPFLAGS = \ + -DTUKLIB_GETTEXT=0 \ + -I$(top_srcdir)/src/common \ + -I$(top_srcdir)/src/liblzma/api \ + -I$(top_builddir)/lib + +xzdec_LDADD = $(top_builddir)/src/liblzma/liblzma.la $(am__append_2) \ + $(LTLIBINTL) +lzmadec_SOURCES = xzdec.c ../common/tuklib_progname.c \ + ../common/tuklib_exit.c $(am__append_3) +lzmadec_CPPFLAGS = $(xzdec_CPPFLAGS) -DLZMADEC +lzmadec_LDFLAGS = $(xzdec_LDFLAGS) +lzmadec_LDADD = $(xzdec_LDADD) +lzmadecmanlink = $(am__append_6) +@COND_XZDEC_TRUE@dist_man_MANS = xzdec.1 +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj .rc +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/xzdec/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign src/xzdec/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +lzmadec$(EXEEXT): $(lzmadec_OBJECTS) $(lzmadec_DEPENDENCIES) $(EXTRA_lzmadec_DEPENDENCIES) + @rm -f lzmadec$(EXEEXT) + $(AM_V_CCLD)$(lzmadec_LINK) $(lzmadec_OBJECTS) $(lzmadec_LDADD) $(LIBS) + +xzdec$(EXEEXT): $(xzdec_OBJECTS) $(xzdec_DEPENDENCIES) $(EXTRA_xzdec_DEPENDENCIES) + @rm -f xzdec$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(xzdec_OBJECTS) $(xzdec_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzmadec-tuklib_exit.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzmadec-tuklib_progname.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzmadec-xzdec.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xzdec-tuklib_exit.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xzdec-tuklib_progname.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xzdec-xzdec.Po@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +lzmadec-xzdec.o: xzdec.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-xzdec.o -MD -MP -MF $(DEPDIR)/lzmadec-xzdec.Tpo -c -o lzmadec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmadec-xzdec.Tpo $(DEPDIR)/lzmadec-xzdec.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='xzdec.c' object='lzmadec-xzdec.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c + +lzmadec-xzdec.obj: xzdec.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-xzdec.obj -MD -MP -MF $(DEPDIR)/lzmadec-xzdec.Tpo -c -o lzmadec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmadec-xzdec.Tpo $(DEPDIR)/lzmadec-xzdec.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='xzdec.c' object='lzmadec-xzdec.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi` + +lzmadec-tuklib_progname.o: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-tuklib_progname.o -MD -MP -MF $(DEPDIR)/lzmadec-tuklib_progname.Tpo -c -o lzmadec-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmadec-tuklib_progname.Tpo $(DEPDIR)/lzmadec-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='lzmadec-tuklib_progname.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c + +lzmadec-tuklib_progname.obj: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-tuklib_progname.obj -MD -MP -MF $(DEPDIR)/lzmadec-tuklib_progname.Tpo -c -o lzmadec-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmadec-tuklib_progname.Tpo $(DEPDIR)/lzmadec-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='lzmadec-tuklib_progname.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` + +lzmadec-tuklib_exit.o: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-tuklib_exit.o -MD -MP -MF $(DEPDIR)/lzmadec-tuklib_exit.Tpo -c -o lzmadec-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmadec-tuklib_exit.Tpo $(DEPDIR)/lzmadec-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='lzmadec-tuklib_exit.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c + +lzmadec-tuklib_exit.obj: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzmadec-tuklib_exit.obj -MD -MP -MF $(DEPDIR)/lzmadec-tuklib_exit.Tpo -c -o lzmadec-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzmadec-tuklib_exit.Tpo $(DEPDIR)/lzmadec-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='lzmadec-tuklib_exit.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(lzmadec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzmadec-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` + +xzdec-xzdec.o: xzdec.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-xzdec.o -MD -MP -MF $(DEPDIR)/xzdec-xzdec.Tpo -c -o xzdec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xzdec-xzdec.Tpo $(DEPDIR)/xzdec-xzdec.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='xzdec.c' object='xzdec-xzdec.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-xzdec.o `test -f 'xzdec.c' || echo '$(srcdir)/'`xzdec.c + +xzdec-xzdec.obj: xzdec.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-xzdec.obj -MD -MP -MF $(DEPDIR)/xzdec-xzdec.Tpo -c -o xzdec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xzdec-xzdec.Tpo $(DEPDIR)/xzdec-xzdec.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='xzdec.c' object='xzdec-xzdec.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-xzdec.obj `if test -f 'xzdec.c'; then $(CYGPATH_W) 'xzdec.c'; else $(CYGPATH_W) '$(srcdir)/xzdec.c'; fi` + +xzdec-tuklib_progname.o: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-tuklib_progname.o -MD -MP -MF $(DEPDIR)/xzdec-tuklib_progname.Tpo -c -o xzdec-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xzdec-tuklib_progname.Tpo $(DEPDIR)/xzdec-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='xzdec-tuklib_progname.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-tuklib_progname.o `test -f '../common/tuklib_progname.c' || echo '$(srcdir)/'`../common/tuklib_progname.c + +xzdec-tuklib_progname.obj: ../common/tuklib_progname.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-tuklib_progname.obj -MD -MP -MF $(DEPDIR)/xzdec-tuklib_progname.Tpo -c -o xzdec-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xzdec-tuklib_progname.Tpo $(DEPDIR)/xzdec-tuklib_progname.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_progname.c' object='xzdec-tuklib_progname.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-tuklib_progname.obj `if test -f '../common/tuklib_progname.c'; then $(CYGPATH_W) '../common/tuklib_progname.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_progname.c'; fi` + +xzdec-tuklib_exit.o: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-tuklib_exit.o -MD -MP -MF $(DEPDIR)/xzdec-tuklib_exit.Tpo -c -o xzdec-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xzdec-tuklib_exit.Tpo $(DEPDIR)/xzdec-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='xzdec-tuklib_exit.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-tuklib_exit.o `test -f '../common/tuklib_exit.c' || echo '$(srcdir)/'`../common/tuklib_exit.c + +xzdec-tuklib_exit.obj: ../common/tuklib_exit.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xzdec-tuklib_exit.obj -MD -MP -MF $(DEPDIR)/xzdec-tuklib_exit.Tpo -c -o xzdec-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xzdec-tuklib_exit.Tpo $(DEPDIR)/xzdec-tuklib_exit.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../common/tuklib_exit.c' object='xzdec-tuklib_exit.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(xzdec_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xzdec-tuklib_exit.obj `if test -f '../common/tuklib_exit.c'; then $(CYGPATH_W) '../common/tuklib_exit.c'; else $(CYGPATH_W) '$(srcdir)/../common/tuklib_exit.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-man1: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(MANS) +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +@COND_XZDEC_FALSE@install-data-hook: +@COND_XZDEC_FALSE@uninstall-hook: +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f ./$(DEPDIR)/lzmadec-tuklib_exit.Po + -rm -f ./$(DEPDIR)/lzmadec-tuklib_progname.Po + -rm -f ./$(DEPDIR)/lzmadec-xzdec.Po + -rm -f ./$(DEPDIR)/xzdec-tuklib_exit.Po + -rm -f ./$(DEPDIR)/xzdec-tuklib_progname.Po + -rm -f ./$(DEPDIR)/xzdec-xzdec.Po + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f ./$(DEPDIR)/lzmadec-tuklib_exit.Po + -rm -f ./$(DEPDIR)/lzmadec-tuklib_progname.Po + -rm -f ./$(DEPDIR)/lzmadec-xzdec.Po + -rm -f ./$(DEPDIR)/xzdec-tuklib_exit.Po + -rm -f ./$(DEPDIR)/xzdec-tuklib_progname.Po + -rm -f ./$(DEPDIR)/xzdec-xzdec.Po + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-man + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook +uninstall-man: uninstall-man1 + +.MAKE: install-am install-data-am install-strip uninstall-am + +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ + clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \ + ctags ctags-am distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-data-hook install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-hook \ + uninstall-man uninstall-man1 + +.PRECIOUS: Makefile + + +# Windows resource compiler support. It's fine to use xz_CPPFLAGS +# also for lzmadec. +.rc.o: + $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(xzdec_CPPFLAGS) $(CPPFLAGS) $(RCFLAGS) -i $< -o $@ + +# The installation of translated man pages abuses Automake internals +# by calling "install-man" with redefined dist_man_MANS and man_MANS. +# If this breaks some day, don't blame Automake developers. +@COND_XZDEC_TRUE@install-data-hook: +@COND_XZDEC_TRUE@ languages= ; \ +@COND_XZDEC_TRUE@ if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ +@COND_XZDEC_TRUE@ languages=`ls "$(top_srcdir)/po4a/man"`; \ +@COND_XZDEC_TRUE@ fi; \ +@COND_XZDEC_TRUE@ target=`echo xzdec | sed '$(transform)'` && \ +@COND_XZDEC_TRUE@ link=`echo lzmadec | sed '$(transform)'` && \ +@COND_XZDEC_TRUE@ for lang in . $$languages; do \ +@COND_XZDEC_TRUE@ man="$(top_srcdir)/po4a/man/$$lang/xzdec.1" ; \ +@COND_XZDEC_TRUE@ if test -f "$$man"; then \ +@COND_XZDEC_TRUE@ $(MAKE) dist_man_MANS="$$man" man_MANS= \ +@COND_XZDEC_TRUE@ mandir="$(mandir)/$$lang" install-man; \ +@COND_XZDEC_TRUE@ fi; \ +@COND_XZDEC_TRUE@ man1dir="$(DESTDIR)$(mandir)/$$lang/man1" && \ +@COND_XZDEC_TRUE@ if test -f "$$man1dir/$$target.1"; then \ +@COND_XZDEC_TRUE@ if test -n "$(lzmadecmanlink)"; then ( \ +@COND_XZDEC_TRUE@ cd "$$man1dir" && \ +@COND_XZDEC_TRUE@ rm -f "$$link.1" && \ +@COND_XZDEC_TRUE@ $(LN_S) "$$target.1" "$$link.1" \ +@COND_XZDEC_TRUE@ ); fi; \ +@COND_XZDEC_TRUE@ fi; \ +@COND_XZDEC_TRUE@ done + +@COND_XZDEC_TRUE@uninstall-hook: +@COND_XZDEC_TRUE@ languages= ; \ +@COND_XZDEC_TRUE@ if test "$(USE_NLS)" = yes && test -d "$(top_srcdir)/po4a/man"; then \ +@COND_XZDEC_TRUE@ languages=`ls "$(top_srcdir)/po4a/man"`; \ +@COND_XZDEC_TRUE@ fi; \ +@COND_XZDEC_TRUE@ for lang in . $$languages; do \ +@COND_XZDEC_TRUE@ for name in xzdec $(lzmadecmanlink); do \ +@COND_XZDEC_TRUE@ name=`echo $$name | sed '$(transform)'` && \ +@COND_XZDEC_TRUE@ rm -f "$(DESTDIR)$(mandir)/$$lang/man1/$$name.1"; \ +@COND_XZDEC_TRUE@ done; \ +@COND_XZDEC_TRUE@ done + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/xzdec/lzmadec_w32res.rc b/src/xzdec/lzmadec_w32res.rc new file mode 100644 index 0000000..b85962d --- /dev/null +++ b/src/xzdec/lzmadec_w32res.rc @@ -0,0 +1,12 @@ +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#define MY_TYPE VFT_APP +#define MY_NAME "lzmadec" +#define MY_SUFFIX ".exe" +#define MY_DESC "lzmadec decompression tool for .lzma files" +#include "common_w32res.rc" diff --git a/src/xzdec/xzdec.1 b/src/xzdec/xzdec.1 new file mode 100644 index 0000000..78bc9b4 --- /dev/null +++ b/src/xzdec/xzdec.1 @@ -0,0 +1,146 @@ +.\" +.\" Author: Lasse Collin +.\" +.\" This file has been put into the public domain. +.\" You can do whatever you want with this file. +.\" +.TH XZDEC 1 "2017-04-19" "Tukaani" "XZ Utils" +.SH NAME +xzdec, lzmadec \- Small .xz and .lzma decompressors +.SH SYNOPSIS +.B xzdec +.RI [ option... ] +.RI [ file... ] +.br +.B lzmadec +.RI [ option... ] +.RI [ file... ] +.SH DESCRIPTION +.B xzdec +is a liblzma-based decompression-only tool for +.B .xz +(and only +.BR .xz ) +files. +.B xzdec +is intended to work as a drop-in replacement for +.BR xz (1) +in the most common situations where a script +has been written to use +.B "xz \-\-decompress \-\-stdout" +(and possibly a few other commonly used options) to decompress +.B .xz +files. +.B lzmadec +is identical to +.B xzdec +except that +.B lzmadec +supports +.B .lzma +files instead of +.B .xz +files. +.PP +To reduce the size of the executable, +.B xzdec +doesn't support multithreading or localization, +and doesn't read options from +.B XZ_DEFAULTS +and +.B XZ_OPT +environment variables. +.B xzdec +doesn't support displaying intermediate progress information: sending +.B SIGINFO +to +.B xzdec +does nothing, but sending +.B SIGUSR1 +terminates the process instead of displaying progress information. +.SH OPTIONS +.TP +.BR \-d ", " \-\-decompress ", " \-\-uncompress +Ignored for +.BR xz (1) +compatibility. +.B xzdec +supports only decompression. +.TP +.BR \-k ", " \-\-keep +Ignored for +.BR xz (1) +compatibility. +.B xzdec +never creates or removes any files. +.TP +.BR \-c ", " \-\-stdout ", " \-\-to-stdout +Ignored for +.BR xz (1) +compatibility. +.B xzdec +always writes the decompressed data to standard output. +.TP +.BR \-q ", " \-\-quiet +Specifying this once does nothing since +.B xzdec +never displays any warnings or notices. +Specify this twice to suppress errors. +.TP +.BR \-Q ", " \-\-no-warn +Ignored for +.BR xz (1) +compatibility. +.B xzdec +never uses the exit status 2. +.TP +.BR \-h ", " \-\-help +Display a help message and exit successfully. +.TP +.BR \-V ", " \-\-version +Display the version number of +.B xzdec +and liblzma. +.SH "EXIT STATUS" +.TP +.B 0 +All was good. +.TP +.B 1 +An error occurred. +.PP +.B xzdec +doesn't have any warning messages like +.BR xz (1) +has, thus the exit status 2 is not used by +.BR xzdec . +.SH NOTES +Use +.BR xz (1) +instead of +.B xzdec +or +.B lzmadec +for normal everyday use. +.B xzdec +or +.B lzmadec +are meant only for situations where it is important to have +a smaller decompressor than the full-featured +.BR xz (1). +.PP +.B xzdec +and +.B lzmadec +are not really that small. +The size can be reduced further by dropping +features from liblzma at compile time, +but that shouldn't usually be done for executables distributed +in typical non-embedded operating system distributions. +If you need a truly small +.B .xz +decompressor, consider using XZ Embedded. +.SH "SEE ALSO" +.BR xz (1) +.PP +XZ Embedded: diff --git a/src/xzdec/xzdec.c b/src/xzdec/xzdec.c new file mode 100644 index 0000000..c1bd199 --- /dev/null +++ b/src/xzdec/xzdec.c @@ -0,0 +1,323 @@ +/////////////////////////////////////////////////////////////////////////////// +// +/// \file xzdec.c +/// \brief Simple single-threaded tool to uncompress .xz or .lzma files +// +// Author: Lasse Collin +// +// This file has been put into the public domain. +// You can do whatever you want with this file. +// +/////////////////////////////////////////////////////////////////////////////// + +#include "sysdefs.h" +#include "lzma.h" + +#include +#include +#include +#include + +#include "getopt.h" +#include "tuklib_progname.h" +#include "tuklib_exit.h" + +#ifdef TUKLIB_DOSLIKE +# include +# include +#endif + + +#ifdef LZMADEC +# define TOOL_FORMAT "lzma" +#else +# define TOOL_FORMAT "xz" +#endif + + +/// Error messages are suppressed if this is zero, which is the case when +/// --quiet has been given at least twice. +static int display_errors = 2; + + +static void lzma_attribute((__format__(__printf__, 1, 2))) +my_errorf(const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + + if (display_errors) { + fprintf(stderr, "%s: ", progname); + vfprintf(stderr, fmt, ap); + fprintf(stderr, "\n"); + } + + va_end(ap); + return; +} + + +static void lzma_attribute((__noreturn__)) +help(void) +{ + printf( +"Usage: %s [OPTION]... [FILE]...\n" +"Decompress files in the ." TOOL_FORMAT " format to standard output.\n" +"\n" +" -d, --decompress (ignored, only decompression is supported)\n" +" -k, --keep (ignored, files are never deleted)\n" +" -c, --stdout (ignored, output is always written to standard output)\n" +" -q, --quiet specify *twice* to suppress errors\n" +" -Q, --no-warn (ignored, the exit status 2 is never used)\n" +" -h, --help display this help and exit\n" +" -V, --version display the version number and exit\n" +"\n" +"With no FILE, or when FILE is -, read standard input.\n" +"\n" +"Report bugs to <" PACKAGE_BUGREPORT "> (in English or Finnish).\n" +PACKAGE_NAME " home page: <" PACKAGE_URL ">\n", progname); + + tuklib_exit(EXIT_SUCCESS, EXIT_FAILURE, display_errors); +} + + +static void lzma_attribute((__noreturn__)) +version(void) +{ + printf(TOOL_FORMAT "dec (" PACKAGE_NAME ") " LZMA_VERSION_STRING "\n" + "liblzma %s\n", lzma_version_string()); + + tuklib_exit(EXIT_SUCCESS, EXIT_FAILURE, display_errors); +} + + +/// Parses command line options. +static void +parse_options(int argc, char **argv) +{ + static const char short_opts[] = "cdkM:hqQV"; + static const struct option long_opts[] = { + { "stdout", no_argument, NULL, 'c' }, + { "to-stdout", no_argument, NULL, 'c' }, + { "decompress", no_argument, NULL, 'd' }, + { "uncompress", no_argument, NULL, 'd' }, + { "keep", no_argument, NULL, 'k' }, + { "quiet", no_argument, NULL, 'q' }, + { "no-warn", no_argument, NULL, 'Q' }, + { "help", no_argument, NULL, 'h' }, + { "version", no_argument, NULL, 'V' }, + { NULL, 0, NULL, 0 } + }; + + int c; + + while ((c = getopt_long(argc, argv, short_opts, long_opts, NULL)) + != -1) { + switch (c) { + case 'c': + case 'd': + case 'k': + case 'Q': + break; + + case 'q': + if (display_errors > 0) + --display_errors; + + break; + + case 'h': + help(); + + case 'V': + version(); + + default: + exit(EXIT_FAILURE); + } + } + + return; +} + + +static void +uncompress(lzma_stream *strm, FILE *file, const char *filename) +{ + lzma_ret ret; + + // Initialize the decoder +#ifdef LZMADEC + ret = lzma_alone_decoder(strm, UINT64_MAX); +#else + ret = lzma_stream_decoder(strm, UINT64_MAX, LZMA_CONCATENATED); +#endif + + // The only reasonable error here is LZMA_MEM_ERROR. + if (ret != LZMA_OK) { + my_errorf("%s", ret == LZMA_MEM_ERROR ? strerror(ENOMEM) + : "Internal error (bug)"); + exit(EXIT_FAILURE); + } + + // Input and output buffers + uint8_t in_buf[BUFSIZ]; + uint8_t out_buf[BUFSIZ]; + + strm->avail_in = 0; + strm->next_out = out_buf; + strm->avail_out = BUFSIZ; + + lzma_action action = LZMA_RUN; + + while (true) { + if (strm->avail_in == 0) { + strm->next_in = in_buf; + strm->avail_in = fread(in_buf, 1, BUFSIZ, file); + + if (ferror(file)) { + // POSIX says that fread() sets errno if + // an error occurred. ferror() doesn't + // touch errno. + my_errorf("%s: Error reading input file: %s", + filename, strerror(errno)); + exit(EXIT_FAILURE); + } + +#ifndef LZMADEC + // When using LZMA_CONCATENATED, we need to tell + // liblzma when it has got all the input. + if (feof(file)) + action = LZMA_FINISH; +#endif + } + + ret = lzma_code(strm, action); + + // Write and check write error before checking decoder error. + // This way as much data as possible gets written to output + // even if decoder detected an error. + if (strm->avail_out == 0 || ret != LZMA_OK) { + const size_t write_size = BUFSIZ - strm->avail_out; + + if (fwrite(out_buf, 1, write_size, stdout) + != write_size) { + // Wouldn't be a surprise if writing to stderr + // would fail too but at least try to show an + // error message. + my_errorf("Cannot write to standard output: " + "%s", strerror(errno)); + exit(EXIT_FAILURE); + } + + strm->next_out = out_buf; + strm->avail_out = BUFSIZ; + } + + if (ret != LZMA_OK) { + if (ret == LZMA_STREAM_END) { +#ifdef LZMADEC + // Check that there's no trailing garbage. + if (strm->avail_in != 0 + || fread(in_buf, 1, 1, file) + != 0 + || !feof(file)) + ret = LZMA_DATA_ERROR; + else + return; +#else + // lzma_stream_decoder() already guarantees + // that there's no trailing garbage. + assert(strm->avail_in == 0); + assert(action == LZMA_FINISH); + assert(feof(file)); + return; +#endif + } + + const char *msg; + switch (ret) { + case LZMA_MEM_ERROR: + msg = strerror(ENOMEM); + break; + + case LZMA_FORMAT_ERROR: + msg = "File format not recognized"; + break; + + case LZMA_OPTIONS_ERROR: + // FIXME: Better message? + msg = "Unsupported compression options"; + break; + + case LZMA_DATA_ERROR: + msg = "File is corrupt"; + break; + + case LZMA_BUF_ERROR: + msg = "Unexpected end of input"; + break; + + default: + msg = "Internal error (bug)"; + break; + } + + my_errorf("%s: %s", filename, msg); + exit(EXIT_FAILURE); + } + } +} + + +int +main(int argc, char **argv) +{ + // Initialize progname which we will be used in error messages. + tuklib_progname_init(argv); + + // Parse the command line options. + parse_options(argc, argv); + + // The same lzma_stream is used for all files that we decode. This way + // we don't need to reallocate memory for every file if they use same + // compression settings. + lzma_stream strm = LZMA_STREAM_INIT; + + // Some systems require setting stdin and stdout to binary mode. +#ifdef TUKLIB_DOSLIKE + setmode(fileno(stdin), O_BINARY); + setmode(fileno(stdout), O_BINARY); +#endif + + if (optind == argc) { + // No filenames given, decode from stdin. + uncompress(&strm, stdin, "(stdin)"); + } else { + // Loop through the filenames given on the command line. + do { + // "-" indicates stdin. + if (strcmp(argv[optind], "-") == 0) { + uncompress(&strm, stdin, "(stdin)"); + } else { + FILE *file = fopen(argv[optind], "rb"); + if (file == NULL) { + my_errorf("%s: %s", argv[optind], + strerror(errno)); + exit(EXIT_FAILURE); + } + + uncompress(&strm, file, argv[optind]); + fclose(file); + } + } while (++optind < argc); + } + +#ifndef NDEBUG + // Free the memory only when debugging. Freeing wastes some time, + // but allows detecting possible memory leaks with Valgrind. + lzma_end(&strm); +#endif + + tuklib_exit(EXIT_SUCCESS, EXIT_FAILURE, display_errors); +} diff --git a/src/xzdec/xzdec_w32res.rc b/src/xzdec/xzdec_w32res.rc new file mode 100644 index 0000000..0e26a22 --- /dev/null +++ b/src/xzdec/xzdec_w32res.rc @@ -0,0 +1,12 @@ +/* + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#define MY_TYPE VFT_APP +#define MY_NAME "xzdec" +#define MY_SUFFIX ".exe" +#define MY_DESC "xzdec decompression tool for .xz files" +#include "common_w32res.rc" -- cgit v1.2.3