diff options
Diffstat (limited to 'debian/config-dir/sites-available/default-ssl.conf')
| -rw-r--r-- | debian/config-dir/sites-available/default-ssl.conf | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/debian/config-dir/sites-available/default-ssl.conf b/debian/config-dir/sites-available/default-ssl.conf new file mode 100644 index 0000000..7e37a9c --- /dev/null +++ b/debian/config-dir/sites-available/default-ssl.conf @@ -0,0 +1,134 @@ +<IfModule mod_ssl.c> + <VirtualHost _default_:443> + ServerAdmin webmaster@localhost + + DocumentRoot /var/www/html + + # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, + # error, crit, alert, emerg. + # It is also possible to configure the loglevel for particular + # modules, e.g. + #LogLevel info ssl:warn + + ErrorLog ${APACHE_LOG_DIR}/error.log + CustomLog ${APACHE_LOG_DIR}/access.log combined + + # For most configuration files from conf-available/, which are + # enabled or disabled at a global level, it is possible to + # include a line for only one particular virtual host. For example the + # following line enables the CGI configuration for this host only + # after it has been globally disabled with "a2disconf". + #Include conf-available/serve-cgi-bin.conf + + # SSL Engine Switch: + # Enable/Disable SSL for this virtual host. + SSLEngine on + + # A self-signed (snakeoil) certificate can be created by installing + # the ssl-cert package. See + # /usr/share/doc/apache2/README.Debian.gz for more info. + # If both key and certificate are stored in the same file, only the + # SSLCertificateFile directive is needed. + SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem + SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key + + # Server Certificate Chain: + # Point SSLCertificateChainFile at a file containing the + # concatenation of PEM encoded CA certificates which form the + # certificate chain for the server certificate. Alternatively + # the referenced file can be the same as SSLCertificateFile + # when the CA certificates are directly appended to the server + # certificate for convinience. + #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt + + # Certificate Authority (CA): + # Set the CA certificate verification path where to find CA + # certificates for client authentication or alternatively one + # huge file containing all of them (file must be PEM encoded) + # Note: Inside SSLCACertificatePath you need hash symlinks + # to point to the certificate files. Use the provided + # Makefile to update the hash symlinks after changes. + #SSLCACertificatePath /etc/ssl/certs/ + #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt + + # Certificate Revocation Lists (CRL): + # Set the CA revocation path where to find CA CRLs for client + # authentication or alternatively one huge file containing all + # of them (file must be PEM encoded) + # Note: Inside SSLCARevocationPath you need hash symlinks + # to point to the certificate files. Use the provided + # Makefile to update the hash symlinks after changes. + #SSLCARevocationPath /etc/apache2/ssl.crl/ + #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl + + # Client Authentication (Type): + # Client certificate verification type and depth. Types are + # none, optional, require and optional_no_ca. Depth is a + # number which specifies how deeply to verify the certificate + # issuer chain before deciding the certificate is not valid. + #SSLVerifyClient require + #SSLVerifyDepth 10 + + # SSL Engine Options: + # Set various options for the SSL engine. + # o FakeBasicAuth: + # Translate the client X.509 into a Basic Authorisation. This means that + # the standard Auth/DBMAuth methods can be used for access control. The + # user name is the `one line' version of the client's X.509 certificate. + # Note that no password is obtained from the user. Every entry in the user + # file needs this password: `xxj31ZMTZzkVA'. + # o ExportCertData: + # This exports two additional environment variables: SSL_CLIENT_CERT and + # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the + # server (always existing) and the client (only existing when client + # authentication is used). This can be used to import the certificates + # into CGI scripts. + # o StdEnvVars: + # This exports the standard SSL/TLS related `SSL_*' environment variables. + # Per default this exportation is switched off for performance reasons, + # because the extraction step is an expensive operation and is usually + # useless for serving static content. So one usually enables the + # exportation for CGI and SSI requests only. + # o OptRenegotiate: + # This enables optimized SSL connection renegotiation handling when SSL + # directives are used in per-directory context. + #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire + <FilesMatch "\.(cgi|shtml|phtml|php)$"> + SSLOptions +StdEnvVars + </FilesMatch> + <Directory /usr/lib/cgi-bin> + SSLOptions +StdEnvVars + </Directory> + + # SSL Protocol Adjustments: + # The safe and default but still SSL/TLS standard compliant shutdown + # approach is that mod_ssl sends the close notify alert but doesn't wait for + # the close notify alert from client. When you need a different shutdown + # approach you can use one of the following variables: + # o ssl-unclean-shutdown: + # This forces an unclean shutdown when the connection is closed, i.e. no + # SSL close notify alert is send or allowed to received. This violates + # the SSL/TLS standard but is needed for some brain-dead browsers. Use + # this when you receive I/O errors because of the standard approach where + # mod_ssl sends the close notify alert. + # o ssl-accurate-shutdown: + # This forces an accurate shutdown when the connection is closed, i.e. a + # SSL close notify alert is send and mod_ssl waits for the close notify + # alert of the client. This is 100% SSL/TLS standard compliant, but in + # practice often causes hanging connections with brain-dead browsers. Use + # this only for browsers where you know that their SSL implementation + # works correctly. + # Notice: Most problems of broken clients are also related to the HTTP + # keep-alive facility, so you usually additionally want to disable + # keep-alive for those clients, too. Use variable "nokeepalive" for this. + # Similarly, one has to force some clients to use HTTP/1.0 to workaround + # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and + # "force-response-1.0" for this. + # BrowserMatch "MSIE [2-6]" \ + # nokeepalive ssl-unclean-shutdown \ + # downgrade-1.0 force-response-1.0 + + </VirtualHost> +</IfModule> + +# vim: syntax=apache ts=4 sw=4 sts=4 sr noet |