diff options
Diffstat (limited to 'modules/arch/win32')
| -rw-r--r-- | modules/arch/win32/Makefile.in | 3 | ||||
| -rw-r--r-- | modules/arch/win32/config.m4 | 9 | ||||
| -rw-r--r-- | modules/arch/win32/mod_isapi.c | 1728 | ||||
| -rw-r--r-- | modules/arch/win32/mod_isapi.dep | 61 | ||||
| -rw-r--r-- | modules/arch/win32/mod_isapi.dsp | 115 | ||||
| -rw-r--r-- | modules/arch/win32/mod_isapi.h | 271 | ||||
| -rw-r--r-- | modules/arch/win32/mod_isapi.mak | 353 | ||||
| -rw-r--r-- | modules/arch/win32/mod_win32.c | 563 |
8 files changed, 3103 insertions, 0 deletions
diff --git a/modules/arch/win32/Makefile.in b/modules/arch/win32/Makefile.in new file mode 100644 index 0000000..7c5c149 --- /dev/null +++ b/modules/arch/win32/Makefile.in @@ -0,0 +1,3 @@ +# a modules Makefile has no explicit targets -- they will be defined by +# whatever modules are enabled. just grab special.mk to deal with this. +include $(top_srcdir)/build/special.mk diff --git a/modules/arch/win32/config.m4 b/modules/arch/win32/config.m4 new file mode 100644 index 0000000..584e76d --- /dev/null +++ b/modules/arch/win32/config.m4 @@ -0,0 +1,9 @@ +dnl modules enabled in this directory by default + +dnl APACHE_MODULE(name, helptext[, objects[, structname[, default[, config]]]]) + +APACHE_MODPATH_INIT(arch/win32) + +APACHE_MODULE(isapi, isapi extension support, , , no) + +APACHE_MODPATH_FINISH diff --git a/modules/arch/win32/mod_isapi.c b/modules/arch/win32/mod_isapi.c new file mode 100644 index 0000000..a9816e5 --- /dev/null +++ b/modules/arch/win32/mod_isapi.c @@ -0,0 +1,1728 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* + * mod_isapi.c - Internet Server Application (ISA) module for Apache + * by Alexei Kosut <akosut@apache.org>, significant overhauls and + * redesign by William Rowe <wrowe@covalent.net>, and hints from many + * other developer/users who have hit on specific flaws. + * + * This module implements the ISAPI Handler architecture, allowing + * Apache to load Internet Server Applications (ISAPI extensions), + * similar to the support in IIS, Zope, O'Reilly's WebSite and others. + * + * It is a complete implementation of the ISAPI 2.0 specification, + * except for "Microsoft extensions" to the API which provide + * asynchronous I/O. It is further extended to include additional + * "Microsoft extensions" through IIS 5.0, with some deficiencies + * where one-to-one mappings don't exist. + * + * Refer to /manual/mod/mod_isapi.html for additional details on + * configuration and use, but check this source for specific support + * of the API, + */ + +#include "ap_config.h" +#include "httpd.h" +#include "http_config.h" +#include "http_core.h" +#include "http_protocol.h" +#include "http_request.h" +#include "http_log.h" +#include "util_script.h" +#include "mod_core.h" +#include "apr_lib.h" +#include "apr_strings.h" +#include "apr_portable.h" +#include "apr_buckets.h" +#include "apr_thread_mutex.h" +#include "apr_thread_rwlock.h" +#include "apr_hash.h" +#include "mod_isapi.h" + +/* Retry frequency for a failed-to-load isapi .dll */ +#define ISAPI_RETRY apr_time_from_sec(30) + +/********************************************************** + * + * ISAPI Module Configuration + * + **********************************************************/ + +module AP_MODULE_DECLARE_DATA isapi_module; + +#define ISAPI_UNDEF -1 + +/* Our isapi per-dir config structure */ +typedef struct isapi_dir_conf { + int read_ahead_buflen; + int log_unsupported; + int log_to_errlog; + int log_to_query; + int fake_async; +} isapi_dir_conf; + +typedef struct isapi_loaded isapi_loaded; + +apr_status_t isapi_lookup(apr_pool_t *p, server_rec *s, request_rec *r, + const char *fpath, isapi_loaded** isa); + +static void *create_isapi_dir_config(apr_pool_t *p, char *dummy) +{ + isapi_dir_conf *dir = apr_palloc(p, sizeof(isapi_dir_conf)); + + dir->read_ahead_buflen = ISAPI_UNDEF; + dir->log_unsupported = ISAPI_UNDEF; + dir->log_to_errlog = ISAPI_UNDEF; + dir->log_to_query = ISAPI_UNDEF; + dir->fake_async = ISAPI_UNDEF; + + return dir; +} + +static void *merge_isapi_dir_configs(apr_pool_t *p, void *base_, void *add_) +{ + isapi_dir_conf *base = (isapi_dir_conf *) base_; + isapi_dir_conf *add = (isapi_dir_conf *) add_; + isapi_dir_conf *dir = apr_palloc(p, sizeof(isapi_dir_conf)); + + dir->read_ahead_buflen = (add->read_ahead_buflen == ISAPI_UNDEF) + ? base->read_ahead_buflen + : add->read_ahead_buflen; + dir->log_unsupported = (add->log_unsupported == ISAPI_UNDEF) + ? base->log_unsupported + : add->log_unsupported; + dir->log_to_errlog = (add->log_to_errlog == ISAPI_UNDEF) + ? base->log_to_errlog + : add->log_to_errlog; + dir->log_to_query = (add->log_to_query == ISAPI_UNDEF) + ? base->log_to_query + : add->log_to_query; + dir->fake_async = (add->fake_async == ISAPI_UNDEF) + ? base->fake_async + : add->fake_async; + + return dir; +} + +static const char *isapi_cmd_cachefile(cmd_parms *cmd, void *dummy, + const char *filename) +{ + isapi_loaded *isa; + apr_finfo_t tmp; + apr_status_t rv; + char *fspec; + + /* ### Just an observation ... it would be terribly cool to be + * able to use this per-dir, relative to the directory block being + * defined. The hash result remains global, but shorthand of + * <Directory "c:/webapps/isapi"> + * ISAPICacheFile myapp.dll anotherapp.dll thirdapp.dll + * </Directory> + * would be very convienent. + */ + fspec = ap_server_root_relative(cmd->pool, filename); + if (!fspec) { + ap_log_error(APLOG_MARK, APLOG_WARNING, APR_EBADPATH, cmd->server, APLOGNO(02103) + "invalid module path, skipping %s", filename); + return NULL; + } + if ((rv = apr_stat(&tmp, fspec, APR_FINFO_TYPE, + cmd->temp_pool)) != APR_SUCCESS) { + ap_log_error(APLOG_MARK, APLOG_WARNING, rv, cmd->server, APLOGNO(02104) + "unable to stat, skipping %s", fspec); + return NULL; + } + if (tmp.filetype != APR_REG) { + ap_log_error(APLOG_MARK, APLOG_WARNING, 0, cmd->server, APLOGNO(02105) + "not a regular file, skipping %s", fspec); + return NULL; + } + + /* Load the extension as cached (with null request_rec) */ + rv = isapi_lookup(cmd->pool, cmd->server, NULL, fspec, &isa); + if (rv != APR_SUCCESS) { + ap_log_error(APLOG_MARK, APLOG_WARNING, rv, cmd->server, APLOGNO(02106) + "unable to cache, skipping %s", fspec); + return NULL; + } + + return NULL; +} + +static const command_rec isapi_cmds[] = { + AP_INIT_TAKE1("ISAPIReadAheadBuffer", ap_set_int_slot, + (void *)APR_OFFSETOF(isapi_dir_conf, read_ahead_buflen), + OR_FILEINFO, "Maximum client request body to initially pass to the" + " ISAPI handler (default: 49152)"), + AP_INIT_FLAG("ISAPILogNotSupported", ap_set_flag_slot, + (void *)APR_OFFSETOF(isapi_dir_conf, log_unsupported), + OR_FILEINFO, "Log requests not supported by the ISAPI server" + " on or off (default: off)"), + AP_INIT_FLAG("ISAPIAppendLogToErrors", ap_set_flag_slot, + (void *)APR_OFFSETOF(isapi_dir_conf, log_to_errlog), + OR_FILEINFO, "Send all Append Log requests to the error log" + " on or off (default: off)"), + AP_INIT_FLAG("ISAPIAppendLogToQuery", ap_set_flag_slot, + (void *)APR_OFFSETOF(isapi_dir_conf, log_to_query), + OR_FILEINFO, "Append Log requests are concatenated to the query args" + " on or off (default: on)"), + AP_INIT_FLAG("ISAPIFakeAsync", ap_set_flag_slot, + (void *)APR_OFFSETOF(isapi_dir_conf, fake_async), + OR_FILEINFO, "Fake Asynchronous support for isapi callbacks" + " on or off [Experimental] (default: off)"), + AP_INIT_ITERATE("ISAPICacheFile", isapi_cmd_cachefile, NULL, + RSRC_CONF, "Cache the specified ISAPI extension in-process"), + {NULL} +}; + +/********************************************************** + * + * ISAPI Module Cache handling section + * + **********************************************************/ + +/* Our isapi global config values */ +static struct isapi_global_conf { + apr_pool_t *pool; + apr_thread_mutex_t *lock; + apr_hash_t *hash; +} loaded; + +/* Our loaded isapi module description structure */ +struct isapi_loaded { + const char *filename; + apr_thread_rwlock_t *in_progress; + apr_status_t last_load_rv; + apr_time_t last_load_time; + apr_dso_handle_t *handle; + HSE_VERSION_INFO *isapi_version; + apr_uint32_t report_version; + apr_uint32_t timeout; + PFN_GETEXTENSIONVERSION GetExtensionVersion; + PFN_HTTPEXTENSIONPROC HttpExtensionProc; + PFN_TERMINATEEXTENSION TerminateExtension; +}; + +static apr_status_t isapi_unload(isapi_loaded *isa, int force) +{ + /* All done with the DLL... get rid of it... + * + * If optionally cached, and we weren't asked to force the unload, + * pass HSE_TERM_ADVISORY_UNLOAD, and if it returns 1, unload, + * otherwise, leave it alone (it didn't choose to cooperate.) + */ + if (!isa->handle) { + return APR_SUCCESS; + } + if (isa->TerminateExtension) { + if (force) { + (*isa->TerminateExtension)(HSE_TERM_MUST_UNLOAD); + } + else if (!(*isa->TerminateExtension)(HSE_TERM_ADVISORY_UNLOAD)) { + return APR_EGENERAL; + } + } + apr_dso_unload(isa->handle); + isa->handle = NULL; + return APR_SUCCESS; +} + +static apr_status_t cleanup_isapi(void *isa_) +{ + isapi_loaded* isa = (isapi_loaded*) isa_; + + /* We must force the module to unload, we are about + * to lose the isapi structure's allocation entirely. + */ + return isapi_unload(isa, 1); +} + +static apr_status_t isapi_load(apr_pool_t *p, server_rec *s, isapi_loaded *isa) +{ + apr_status_t rv; + + isa->isapi_version = apr_pcalloc(p, sizeof(HSE_VERSION_INFO)); + + /* TODO: These aught to become overridable, so that we + * assure a given isapi can be fooled into behaving well. + * + * The tricky bit, they aren't really a per-dir sort of + * config, they will always be constant across every + * reference to the .dll no matter what context (vhost, + * location, etc) they apply to. + */ + isa->report_version = 0x500; /* Revision 5.0 */ + isa->timeout = 300 * 1000000; /* microsecs, not used */ + + rv = apr_dso_load(&isa->handle, isa->filename, p); + if (rv) + { + ap_log_error(APLOG_MARK, APLOG_ERR, rv, s, APLOGNO(02107) + "failed to load %s", isa->filename); + isa->handle = NULL; + return rv; + } + + rv = apr_dso_sym((void**)&isa->GetExtensionVersion, isa->handle, + "GetExtensionVersion"); + if (rv) + { + ap_log_error(APLOG_MARK, APLOG_ERR, rv, s, APLOGNO(02108) + "missing GetExtensionVersion() in %s", + isa->filename); + apr_dso_unload(isa->handle); + isa->handle = NULL; + return rv; + } + + rv = apr_dso_sym((void**)&isa->HttpExtensionProc, isa->handle, + "HttpExtensionProc"); + if (rv) + { + ap_log_error(APLOG_MARK, APLOG_ERR, rv, s, APLOGNO(02109) + "missing HttpExtensionProc() in %s", + isa->filename); + apr_dso_unload(isa->handle); + isa->handle = NULL; + return rv; + } + + /* TerminateExtension() is an optional interface */ + rv = apr_dso_sym((void**)&isa->TerminateExtension, isa->handle, + "TerminateExtension"); + apr_set_os_error(0); + + /* Run GetExtensionVersion() */ + if (!(isa->GetExtensionVersion)(isa->isapi_version)) { + apr_status_t rv = apr_get_os_error(); + ap_log_error(APLOG_MARK, APLOG_ERR, rv, s, APLOGNO(02110) + "failed call to GetExtensionVersion() in %s", + isa->filename); + apr_dso_unload(isa->handle); + isa->handle = NULL; + return rv; + } + + apr_pool_cleanup_register(p, isa, cleanup_isapi, + apr_pool_cleanup_null); + + return APR_SUCCESS; +} + +apr_status_t isapi_lookup(apr_pool_t *p, server_rec *s, request_rec *r, + const char *fpath, isapi_loaded** isa) +{ + apr_status_t rv; + const char *key; + + if ((rv = apr_thread_mutex_lock(loaded.lock)) != APR_SUCCESS) { + return rv; + } + + *isa = apr_hash_get(loaded.hash, fpath, APR_HASH_KEY_STRING); + + if (*isa) { + + /* If we find this lock exists, use a set-aside copy of gainlock + * to avoid race conditions on NULLing the in_progress variable + * when the load has completed. Release the global isapi hash + * lock so other requests can proceed, then rdlock for completion + * of loading our desired dll or wrlock if we would like to retry + * loading the dll (because last_load_rv failed and retry is up.) + */ + apr_thread_rwlock_t *gainlock = (*isa)->in_progress; + + /* gainlock is NULLed after the module loads successfully. + * This free-threaded module can be used without any locking. + */ + if (!gainlock) { + rv = (*isa)->last_load_rv; + apr_thread_mutex_unlock(loaded.lock); + return rv; + } + + + if ((*isa)->last_load_rv == APR_SUCCESS) { + apr_thread_mutex_unlock(loaded.lock); + if ((rv = apr_thread_rwlock_rdlock(gainlock)) + != APR_SUCCESS) { + return rv; + } + rv = (*isa)->last_load_rv; + apr_thread_rwlock_unlock(gainlock); + return rv; + } + + if (apr_time_now() > (*isa)->last_load_time + ISAPI_RETRY) { + + /* Remember last_load_time before releasing the global + * hash lock to avoid colliding with another thread + * that hit this exception at the same time as our + * retry attempt, since we unlock the global mutex + * before attempting a write lock for this module. + */ + apr_time_t check_time = (*isa)->last_load_time; + apr_thread_mutex_unlock(loaded.lock); + + if ((rv = apr_thread_rwlock_wrlock(gainlock)) + != APR_SUCCESS) { + return rv; + } + + /* If last_load_time is unchanged, we still own this + * retry, otherwise presume another thread provided + * our retry (for good or ill). Relock the global + * hash for updating last_load_ vars, so their update + * is always atomic to the global lock. + */ + if (check_time == (*isa)->last_load_time) { + + rv = isapi_load(loaded.pool, s, *isa); + + apr_thread_mutex_lock(loaded.lock); + (*isa)->last_load_rv = rv; + (*isa)->last_load_time = apr_time_now(); + apr_thread_mutex_unlock(loaded.lock); + } + else { + rv = (*isa)->last_load_rv; + } + apr_thread_rwlock_unlock(gainlock); + + return rv; + } + + /* We haven't hit timeup on retry, let's grab the last_rv + * within the hash mutex before unlocking. + */ + rv = (*isa)->last_load_rv; + apr_thread_mutex_unlock(loaded.lock); + + return rv; + } + + /* If the module was not found, it's time to create a hash key entry + * before releasing the hash lock to avoid multiple threads from + * loading the same module. + */ + key = apr_pstrdup(loaded.pool, fpath); + *isa = apr_pcalloc(loaded.pool, sizeof(isapi_loaded)); + (*isa)->filename = key; + if (r) { + /* A mutex that exists only long enough to attempt to + * load this isapi dll, the release this module to all + * other takers that came along during the one-time + * load process. Short lifetime for this lock would + * be great, however, using r->pool is nasty if those + * blocked on the lock haven't all unlocked before we + * attempt to destroy. A nastier race condition than + * I want to deal with at this moment... + */ + apr_thread_rwlock_create(&(*isa)->in_progress, loaded.pool); + apr_thread_rwlock_wrlock((*isa)->in_progress); + } + + apr_hash_set(loaded.hash, key, APR_HASH_KEY_STRING, *isa); + + /* Now attempt to load the isapi on our own time, + * allow other isapi processing to resume. + */ + apr_thread_mutex_unlock(loaded.lock); + + rv = isapi_load(loaded.pool, s, *isa); + (*isa)->last_load_time = apr_time_now(); + (*isa)->last_load_rv = rv; + + if (r && (rv == APR_SUCCESS)) { + /* Let others who are blocked on this particular + * module resume their requests, for better or worse. + */ + apr_thread_rwlock_t *unlock = (*isa)->in_progress; + (*isa)->in_progress = NULL; + apr_thread_rwlock_unlock(unlock); + } + else if (!r && (rv != APR_SUCCESS)) { + /* We must leave a rwlock around for requests to retry + * loading this dll after timeup... since we were in + * the setup code we had avoided creating this lock. + */ + apr_thread_rwlock_create(&(*isa)->in_progress, loaded.pool); + } + + return (*isa)->last_load_rv; +} + +/********************************************************** + * + * ISAPI Module request callbacks section + * + **********************************************************/ + +/* Our "Connection ID" structure */ +struct isapi_cid { + EXTENSION_CONTROL_BLOCK *ecb; + isapi_dir_conf dconf; + isapi_loaded *isa; + request_rec *r; + int headers_set; + int response_sent; + PFN_HSE_IO_COMPLETION completion; + void *completion_arg; + apr_thread_mutex_t *completed; +}; + +static int APR_THREAD_FUNC regfnGetServerVariable(isapi_cid *cid, + char *variable_name, + void *buf_ptr, + apr_uint32_t *buf_size) +{ + request_rec *r = cid->r; + const char *result; + char *buf_data = (char*)buf_ptr; + apr_uint32_t len; + + if (!strcmp(variable_name, "ALL_HTTP")) + { + /* crlf delimited, colon split, comma separated and + * null terminated list of HTTP_ vars + */ + const apr_array_header_t *arr = apr_table_elts(r->subprocess_env); + const apr_table_entry_t *elts = (const apr_table_entry_t *)arr->elts; + int i; + + for (len = 0, i = 0; i < arr->nelts; i++) { + if (!strncmp(elts[i].key, "HTTP_", 5)) { + len += strlen(elts[i].key) + strlen(elts[i].val) + 3; + } + } + + if (*buf_size < len + 1) { + *buf_size = len + 1; + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INSUFFICIENT_BUFFER)); + return 0; + } + + for (i = 0; i < arr->nelts; i++) { + if (!strncmp(elts[i].key, "HTTP_", 5)) { + strcpy(buf_data, elts[i].key); + buf_data += strlen(elts[i].key); + *(buf_data++) = ':'; + strcpy(buf_data, elts[i].val); + buf_data += strlen(elts[i].val); + *(buf_data++) = '\r'; + *(buf_data++) = '\n'; + } + } + + *(buf_data++) = '\0'; + *buf_size = len + 1; + return 1; + } + + if (!strcmp(variable_name, "ALL_RAW")) + { + /* crlf delimited, colon split, comma separated and + * null terminated list of the raw request header + */ + const apr_array_header_t *arr = apr_table_elts(r->headers_in); + const apr_table_entry_t *elts = (const apr_table_entry_t *)arr->elts; + int i; + + for (len = 0, i = 0; i < arr->nelts; i++) { + len += strlen(elts[i].key) + strlen(elts[i].val) + 4; + } + + if (*buf_size < len + 1) { + *buf_size = len + 1; + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INSUFFICIENT_BUFFER)); + return 0; + } + + for (i = 0; i < arr->nelts; i++) { + strcpy(buf_data, elts[i].key); + buf_data += strlen(elts[i].key); + *(buf_data++) = ':'; + *(buf_data++) = ' '; + strcpy(buf_data, elts[i].val); + buf_data += strlen(elts[i].val); + *(buf_data++) = '\r'; + *(buf_data++) = '\n'; + } + *(buf_data++) = '\0'; + *buf_size = len + 1; + return 1; + } + + /* Not a special case */ + result = apr_table_get(r->subprocess_env, variable_name); + + if (result) { + len = strlen(result); + if (*buf_size < len + 1) { + *buf_size = len + 1; + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INSUFFICIENT_BUFFER)); + return 0; + } + strcpy(buf_data, result); + *buf_size = len + 1; + return 1; + } + + /* Not Found */ + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_INDEX)); + return 0; +} + +static int APR_THREAD_FUNC regfnReadClient(isapi_cid *cid, + void *buf_data, + apr_uint32_t *buf_size) +{ + request_rec *r = cid->r; + apr_uint32_t read = 0; + int res = 0; + + if (r->remaining < *buf_size) { + *buf_size = (apr_size_t)r->remaining; + } + + while (read < *buf_size && + ((res = ap_get_client_block(r, (char*)buf_data + read, + *buf_size - read)) > 0)) { + read += res; + } + + *buf_size = read; + if (res < 0) { + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_READ_FAULT)); + } + return (res >= 0); +} + +/* Common code invoked for both HSE_REQ_SEND_RESPONSE_HEADER and + * the newer HSE_REQ_SEND_RESPONSE_HEADER_EX ServerSupportFunction(s) + * as well as other functions that write responses and presume that + * the support functions above are optional. + * + * Other callers trying to split headers and body bytes should pass + * head/headlen alone (leaving stat/statlen NULL/0), so that they + * get a proper count of bytes consumed. The argument passed to stat + * isn't counted as the head bytes are. + */ +static apr_ssize_t send_response_header(isapi_cid *cid, + const char *stat, + const char *head, + apr_size_t statlen, + apr_size_t headlen) +{ + int head_present = 1; + int termarg; + int res; + int old_status; + const char *termch; + apr_size_t ate = 0; + + if (!head || headlen == 0 || !*head) { + head = stat; + stat = NULL; + headlen = statlen; + statlen = 0; + head_present = 0; /* Don't eat the header */ + } + + if (!stat || statlen == 0 || !*stat) { + if (head && headlen && *head && ((stat = memchr(head, '\r', headlen)) + || (stat = memchr(head, '\n', headlen)) + || (stat = memchr(head, '\0', headlen)) + || (stat = head + headlen))) { + statlen = stat - head; + if (memchr(head, ':', statlen)) { + stat = "Status: 200 OK"; + statlen = strlen(stat); + } + else { + const char *flip = head; + head = stat; + stat = flip; + headlen -= statlen; + ate += statlen; + if (*head == '\r' && headlen) + ++head, --headlen, ++ate; + if (*head == '\n' && headlen) + ++head, --headlen, ++ate; + } + } + } + + if (stat && (statlen > 0) && *stat) { + char *newstat; + if (!apr_isdigit(*stat)) { + const char *stattok = stat; + int toklen = statlen; + while (toklen && *stattok && !apr_isspace(*stattok)) { + ++stattok; --toklen; + } + while (toklen && apr_isspace(*stattok)) { + ++stattok; --toklen; + } + /* Now decide if we follow the xxx message + * or the http/x.x xxx message format + */ + if (toklen && apr_isdigit(*stattok)) { + statlen = toklen; + stat = stattok; + } + } + newstat = apr_palloc(cid->r->pool, statlen + 9); + strcpy(newstat, "Status: "); + apr_cpystrn(newstat + 8, stat, statlen + 1); + stat = newstat; + statlen += 8; + } + + if (!head || headlen == 0 || !*head) { + head = "\r\n"; + headlen = 2; + } + else + { + if (head[headlen - 1] && head[headlen]) { + /* Whoops... not NULL terminated */ + head = apr_pstrndup(cid->r->pool, head, headlen); + } + } + + /* Seems IIS does not enforce the requirement for \r\n termination + * on HSE_REQ_SEND_RESPONSE_HEADER, but we won't panic... + * ap_scan_script_header_err_strs handles this aspect for us. + * + * Parse them out, or die trying + */ + old_status = cid->r->status; + + if (stat) { + res = ap_scan_script_header_err_strs_ex(cid->r, NULL, + APLOG_MODULE_INDEX, &termch, &termarg, stat, head, NULL); + } + else { + res = ap_scan_script_header_err_strs_ex(cid->r, NULL, + APLOG_MODULE_INDEX, &termch, &termarg, head, NULL); + } + + /* Set our status. */ + if (res) { + /* This is an immediate error result from the parser + */ + cid->r->status = res; + cid->r->status_line = ap_get_status_line(cid->r->status); + cid->ecb->dwHttpStatusCode = cid->r->status; + } + else if (cid->r->status) { + /* We have a status in r->status, so let's just use it. + * This is likely to be the Status: parsed above, and + * may also be a delayed error result from the parser. + * If it was filled in, status_line should also have + * been filled in. + */ + cid->ecb->dwHttpStatusCode = cid->r->status; + } + else if (cid->ecb->dwHttpStatusCode + && cid->ecb->dwHttpStatusCode != HTTP_OK) { + /* Now we fall back on dwHttpStatusCode if it appears + * ap_scan_script_header fell back on the default code. + * Any other results set dwHttpStatusCode to the decoded + * status value. + */ + cid->r->status = cid->ecb->dwHttpStatusCode; + cid->r->status_line = ap_get_status_line(cid->r->status); + } + else if (old_status) { + /* Well... either there is no dwHttpStatusCode or it's HTTP_OK. + * In any case, we don't have a good status to return yet... + * Perhaps the one we came in with will be better. Let's use it, + * if we were given one (note this is a pedantic case, it would + * normally be covered above unless the scan script code unset + * the r->status). Should there be a check here as to whether + * we are setting a valid response code? + */ + cid->r->status = old_status; + cid->r->status_line = ap_get_status_line(cid->r->status); + cid->ecb->dwHttpStatusCode = cid->r->status; + } + else { + /* None of dwHttpStatusCode, the parser's r->status nor the + * old value of r->status were helpful, and nothing was decoded + * from Status: string passed to us. Let's just say HTTP_OK + * and get the data out, this was the isapi dev's oversight. + */ + cid->r->status = HTTP_OK; + cid->r->status_line = ap_get_status_line(cid->r->status); + cid->ecb->dwHttpStatusCode = cid->r->status; + ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, cid->r, APLOGNO(02111) + "Could not determine HTTP response code; using %d", + cid->r->status); + } + + if (cid->r->status == HTTP_INTERNAL_SERVER_ERROR) { + return -1; + } + + /* If only Status was passed, we consumed nothing + */ + if (!head_present) + return 0; + + cid->headers_set = 1; + + /* If all went well, tell the caller we consumed the headers complete + */ + if (!termch) + return(ate + headlen); + + /* Any data left must be sent directly by the caller, all we + * give back is the size of the headers we consumed (which only + * happens if the parser got to the head arg, which varies based + * on whether we passed stat+head to scan, or only head. + */ + if (termch && (termarg == (stat ? 1 : 0)) + && head_present && head + headlen > termch) { + return ate + termch - head; + } + return ate; +} + +static int APR_THREAD_FUNC regfnWriteClient(isapi_cid *cid, + void *buf_ptr, + apr_uint32_t *size_arg, + apr_uint32_t flags) +{ + request_rec *r = cid->r; + conn_rec *c = r->connection; + apr_uint32_t buf_size = *size_arg; + char *buf_data = (char*)buf_ptr; + apr_bucket_brigade *bb; + apr_bucket *b; + apr_status_t rv = APR_SUCCESS; + + if (!cid->headers_set) { + /* It appears that the foxisapi module and other clients + * presume that WriteClient("headers\n\nbody") will work. + * Parse them out, or die trying. + */ + apr_ssize_t ate; + ate = send_response_header(cid, NULL, buf_data, 0, buf_size); + if (ate < 0) { + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } + + buf_data += ate; + buf_size -= ate; + } + + if (buf_size) { + bb = apr_brigade_create(r->pool, c->bucket_alloc); + b = apr_bucket_transient_create(buf_data, buf_size, c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + b = apr_bucket_flush_create(c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + rv = ap_pass_brigade(r->output_filters, bb); + cid->response_sent = 1; + if (rv != APR_SUCCESS) + ap_log_rerror(APLOG_MARK, APLOG_DEBUG, rv, r, APLOGNO(02984) + "WriteClient ap_pass_brigade failed: %s", + r->filename); + } + + if ((flags & HSE_IO_ASYNC) && cid->completion) { + if (rv == APR_SUCCESS) { + cid->completion(cid->ecb, cid->completion_arg, + *size_arg, ERROR_SUCCESS); + } + else { + cid->completion(cid->ecb, cid->completion_arg, + *size_arg, ERROR_WRITE_FAULT); + } + } + return (rv == APR_SUCCESS); +} + +static int APR_THREAD_FUNC regfnServerSupportFunction(isapi_cid *cid, + apr_uint32_t HSE_code, + void *buf_ptr, + apr_uint32_t *buf_size, + apr_uint32_t *data_type) +{ + request_rec *r = cid->r; + conn_rec *c = r->connection; + char *buf_data = (char*)buf_ptr; + request_rec *subreq; + apr_status_t rv; + + switch (HSE_code) { + case HSE_REQ_SEND_URL_REDIRECT_RESP: + /* Set the status to be returned when the HttpExtensionProc() + * is done. + * WARNING: Microsoft now advertises HSE_REQ_SEND_URL_REDIRECT_RESP + * and HSE_REQ_SEND_URL as equivalent per the Jan 2000 SDK. + * They most definitely are not, even in their own samples. + */ + apr_table_set (r->headers_out, "Location", buf_data); + cid->r->status = cid->ecb->dwHttpStatusCode = HTTP_MOVED_TEMPORARILY; + cid->r->status_line = ap_get_status_line(cid->r->status); + cid->headers_set = 1; + return 1; + + case HSE_REQ_SEND_URL: + /* Soak up remaining input */ + if (r->remaining > 0) { + char argsbuffer[HUGE_STRING_LEN]; + while (ap_get_client_block(r, argsbuffer, HUGE_STRING_LEN)); + } + + /* Reset the method to GET */ + r->method = "GET"; + r->method_number = M_GET; + + /* Don't let anyone think there's still data */ + apr_table_unset(r->headers_in, "Content-Length"); + + /* AV fault per PR3598 - redirected path is lost! */ + buf_data = apr_pstrdup(r->pool, (char*)buf_data); + ap_internal_redirect(buf_data, r); + return 1; + + case HSE_REQ_SEND_RESPONSE_HEADER: + { + /* Parse them out, or die trying */ + apr_size_t statlen = 0, headlen = 0; + apr_ssize_t ate; + if (buf_data) + statlen = strlen((char*) buf_data); + if (data_type) + headlen = strlen((char*) data_type); + ate = send_response_header(cid, (char*) buf_data, + (char*) data_type, + statlen, headlen); + if (ate < 0) { + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } + else if ((apr_size_t)ate < headlen) { + apr_bucket_brigade *bb; + apr_bucket *b; + bb = apr_brigade_create(cid->r->pool, c->bucket_alloc); + b = apr_bucket_transient_create((char*) data_type + ate, + headlen - ate, c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + b = apr_bucket_flush_create(c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + rv = ap_pass_brigade(cid->r->output_filters, bb); + cid->response_sent = 1; + if (rv != APR_SUCCESS) + ap_log_rerror(APLOG_MARK, APLOG_DEBUG, rv, r, APLOGNO(03177) + "ServerSupportFunction " + "HSE_REQ_SEND_RESPONSE_HEADER " + "ap_pass_brigade failed: %s", r->filename); + return (rv == APR_SUCCESS); + } + /* Deliberately hold off sending 'just the headers' to begin to + * accumulate the body and speed up the overall response, or at + * least wait for the end the session. + */ + return 1; + } + + case HSE_REQ_DONE_WITH_SESSION: + /* Signal to resume the thread completing this request, + * leave it to the pool cleanup to dispose of our mutex. + */ + if (cid->completed) { + (void)apr_thread_mutex_unlock(cid->completed); + return 1; + } + else if (cid->dconf.log_unsupported) { + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02671) + "ServerSupportFunction " + "HSE_REQ_DONE_WITH_SESSION is not supported: %s", + r->filename); + } + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_REQ_MAP_URL_TO_PATH: + { + /* Map a URL to a filename */ + char *file = (char *)buf_data; + apr_uint32_t len; + subreq = ap_sub_req_lookup_uri( + apr_pstrndup(cid->r->pool, file, *buf_size), r, NULL); + + if (!subreq->filename) { + ap_destroy_sub_req(subreq); + return 0; + } + + len = (apr_uint32_t)strlen(subreq->filename); + + if ((subreq->finfo.filetype == APR_DIR) + && (!subreq->path_info) + && (subreq->filename[len - 1] != '/')) + file = apr_pstrcat(cid->r->pool, subreq->filename, "/", NULL); + else + file = apr_pstrcat(cid->r->pool, subreq->filename, + subreq->path_info, NULL); + + ap_destroy_sub_req(subreq); + +#ifdef WIN32 + /* We need to make this a real Windows path name */ + apr_filepath_merge(&file, "", file, APR_FILEPATH_NATIVE, r->pool); +#endif + + *buf_size = apr_cpystrn(buf_data, file, *buf_size) - buf_data; + + return 1; + } + + case HSE_REQ_GET_SSPI_INFO: + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02672) + "ServerSupportFunction HSE_REQ_GET_SSPI_INFO " + "is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_APPEND_LOG_PARAMETER: + /* Log buf_data, of buf_size bytes, in the URI Query (cs-uri-query) field + */ + apr_table_set(r->notes, "isapi-parameter", (char*) buf_data); + if (cid->dconf.log_to_query) { + if (r->args) + r->args = apr_pstrcat(r->pool, r->args, (char*) buf_data, NULL); + else + r->args = apr_pstrdup(r->pool, (char*) buf_data); + } + if (cid->dconf.log_to_errlog) + ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(02985) + "%s: %s", cid->r->filename, + (char*) buf_data); + return 1; + + case HSE_REQ_IO_COMPLETION: + /* Emulates a completion port... Record callback address and + * user defined arg, we will call this after any async request + * (e.g. transmitfile) as if the request executed async. + * Per MS docs... HSE_REQ_IO_COMPLETION replaces any prior call + * to HSE_REQ_IO_COMPLETION, and buf_data may be set to NULL. + */ + if (cid->dconf.fake_async) { + cid->completion = (PFN_HSE_IO_COMPLETION) buf_data; + cid->completion_arg = (void *) data_type; + return 1; + } + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02673) + "ServerSupportFunction HSE_REQ_IO_COMPLETION " + "is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_REQ_TRANSMIT_FILE: + { + /* we do nothing with (tf->dwFlags & HSE_DISCONNECT_AFTER_SEND) + */ + HSE_TF_INFO *tf = (HSE_TF_INFO*)buf_data; + apr_uint32_t sent = 0; + apr_ssize_t ate = 0; + apr_bucket_brigade *bb; + apr_bucket *b; + apr_file_t *fd; + apr_off_t fsize; + + if (!cid->dconf.fake_async && (tf->dwFlags & HSE_IO_ASYNC)) { + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02674) + "ServerSupportFunction HSE_REQ_TRANSMIT_FILE " + "as HSE_IO_ASYNC is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } + + /* Presume the handle was opened with the CORRECT semantics + * for TransmitFile + */ + if ((rv = apr_os_file_put(&fd, &tf->hFile, + APR_READ | APR_XTHREAD, r->pool)) + != APR_SUCCESS) { + return 0; + } + if (tf->BytesToWrite) { + fsize = tf->BytesToWrite; + } + else { + apr_finfo_t fi; + if (apr_file_info_get(&fi, APR_FINFO_SIZE, fd) != APR_SUCCESS) { + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } + fsize = fi.size - tf->Offset; + } + + /* apr_dupfile_oshandle (&fd, tf->hFile, r->pool); */ + bb = apr_brigade_create(r->pool, c->bucket_alloc); + + /* According to MS: if calling HSE_REQ_TRANSMIT_FILE with the + * HSE_IO_SEND_HEADERS flag, then you can't otherwise call any + * HSE_SEND_RESPONSE_HEADERS* fn, but if you don't use the flag, + * you must have done so. They document that the pHead headers + * option is valid only for HSE_IO_SEND_HEADERS - we are a bit + * more flexible and assume with the flag, pHead are the + * response headers, and without, pHead simply contains text + * (handled after this case). + */ + if ((tf->dwFlags & HSE_IO_SEND_HEADERS) && tf->pszStatusCode) { + ate = send_response_header(cid, tf->pszStatusCode, + (char*)tf->pHead, + strlen(tf->pszStatusCode), + tf->HeadLength); + } + else if (!cid->headers_set && tf->pHead && tf->HeadLength + && *(char*)tf->pHead) { + ate = send_response_header(cid, NULL, (char*)tf->pHead, + 0, tf->HeadLength); + if (ate < 0) + { + apr_brigade_destroy(bb); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } + } + + if (tf->pHead && (apr_size_t)ate < tf->HeadLength) { + b = apr_bucket_transient_create((char*)tf->pHead + ate, + tf->HeadLength - ate, + c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + sent = tf->HeadLength; + } + + sent += (apr_uint32_t)fsize; + apr_brigade_insert_file(bb, fd, tf->Offset, fsize, r->pool); + + if (tf->pTail && tf->TailLength) { + sent += tf->TailLength; + b = apr_bucket_transient_create((char*)tf->pTail, + tf->TailLength, c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + } + + b = apr_bucket_flush_create(c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + rv = ap_pass_brigade(r->output_filters, bb); + cid->response_sent = 1; + if (rv != APR_SUCCESS) + ap_log_rerror(APLOG_MARK, APLOG_DEBUG, rv, r, APLOGNO(03178) + "ServerSupportFunction " + "HSE_REQ_TRANSMIT_FILE " + "ap_pass_brigade failed: %s", r->filename); + + /* Use tf->pfnHseIO + tf->pContext, or if NULL, then use cid->fnIOComplete + * pass pContect to the HseIO callback. + */ + if (tf->dwFlags & HSE_IO_ASYNC) { + if (tf->pfnHseIO) { + if (rv == APR_SUCCESS) { + tf->pfnHseIO(cid->ecb, tf->pContext, + ERROR_SUCCESS, sent); + } + else { + tf->pfnHseIO(cid->ecb, tf->pContext, + ERROR_WRITE_FAULT, sent); + } + } + else if (cid->completion) { + if (rv == APR_SUCCESS) { + cid->completion(cid->ecb, cid->completion_arg, + sent, ERROR_SUCCESS); + } + else { + cid->completion(cid->ecb, cid->completion_arg, + sent, ERROR_WRITE_FAULT); + } + } + } + return (rv == APR_SUCCESS); + } + + case HSE_REQ_REFRESH_ISAPI_ACL: + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02675) + "ServerSupportFunction " + "HSE_REQ_REFRESH_ISAPI_ACL " + "is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_REQ_IS_KEEP_CONN: + *((int *)buf_data) = (r->connection->keepalive == AP_CONN_KEEPALIVE); + return 1; + + case HSE_REQ_ASYNC_READ_CLIENT: + { + apr_uint32_t read = 0; + int res = 0; + if (!cid->dconf.fake_async) { + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02986) + "asynchronous I/O not supported: %s", + r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } + + if (r->remaining < *buf_size) { + *buf_size = (apr_size_t)r->remaining; + } + + while (read < *buf_size && + ((res = ap_get_client_block(r, (char*)buf_data + read, + *buf_size - read)) > 0)) { + read += res; + } + + if ((*data_type & HSE_IO_ASYNC) && cid->completion) { + /* XXX: Many authors issue their next HSE_REQ_ASYNC_READ_CLIENT + * within the completion logic. An example is MS's own PSDK + * sample web/iis/extensions/io/ASyncRead. This potentially + * leads to stack exhaustion. To refactor, the notification + * logic needs to move to isapi_handler() - differentiating + * the cid->completed event with a new flag to indicate + * an async-notice versus the async request completed. + */ + if (res >= 0) { + cid->completion(cid->ecb, cid->completion_arg, + read, ERROR_SUCCESS); + } + else { + cid->completion(cid->ecb, cid->completion_arg, + read, ERROR_READ_FAULT); + } + } + return (res >= 0); + } + + case HSE_REQ_GET_IMPERSONATION_TOKEN: /* Added in ISAPI 4.0 */ + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02676) + "ServerSupportFunction " + "HSE_REQ_GET_IMPERSONATION_TOKEN " + "is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_REQ_MAP_URL_TO_PATH_EX: + { + /* Map a URL to a filename */ + HSE_URL_MAPEX_INFO *info = (HSE_URL_MAPEX_INFO*)data_type; + char* test_uri = apr_pstrndup(r->pool, (char *)buf_data, *buf_size); + + subreq = ap_sub_req_lookup_uri(test_uri, r, NULL); + info->cchMatchingURL = strlen(test_uri); + info->cchMatchingPath = apr_cpystrn(info->lpszPath, subreq->filename, + sizeof(info->lpszPath)) - info->lpszPath; + + /* Mapping started with assuming both strings matched. + * Now roll on the path_info as a mismatch and handle + * terminating slashes for directory matches. + */ + if (subreq->path_info && *subreq->path_info) { + apr_cpystrn(info->lpszPath + info->cchMatchingPath, + subreq->path_info, + sizeof(info->lpszPath) - info->cchMatchingPath); + info->cchMatchingURL -= strlen(subreq->path_info); + if (subreq->finfo.filetype == APR_DIR + && info->cchMatchingPath < sizeof(info->lpszPath) - 1) { + /* roll forward over path_info's first slash */ + ++info->cchMatchingPath; + ++info->cchMatchingURL; + } + } + else if (subreq->finfo.filetype == APR_DIR + && info->cchMatchingPath < sizeof(info->lpszPath) - 1) { + /* Add a trailing slash for directory */ + info->lpszPath[info->cchMatchingPath++] = '/'; + info->lpszPath[info->cchMatchingPath] = '\0'; + } + + /* If the matched isn't a file, roll match back to the prior slash */ + if (subreq->finfo.filetype == APR_NOFILE) { + while (info->cchMatchingPath && info->cchMatchingURL) { + if (info->lpszPath[info->cchMatchingPath - 1] == '/') + break; + --info->cchMatchingPath; + --info->cchMatchingURL; + } + } + + /* Paths returned with back slashes */ + for (test_uri = info->lpszPath; *test_uri; ++test_uri) + if (*test_uri == '/') + *test_uri = '\\'; + + /* is a combination of: + * HSE_URL_FLAGS_READ 0x001 Allow read + * HSE_URL_FLAGS_WRITE 0x002 Allow write + * HSE_URL_FLAGS_EXECUTE 0x004 Allow execute + * HSE_URL_FLAGS_SSL 0x008 Require SSL + * HSE_URL_FLAGS_DONT_CACHE 0x010 Don't cache (VRoot only) + * HSE_URL_FLAGS_NEGO_CERT 0x020 Allow client SSL cert + * HSE_URL_FLAGS_REQUIRE_CERT 0x040 Require client SSL cert + * HSE_URL_FLAGS_MAP_CERT 0x080 Map client SSL cert to account + * HSE_URL_FLAGS_SSL128 0x100 Require 128-bit SSL cert + * HSE_URL_FLAGS_SCRIPT 0x200 Allow script execution + * + * XxX: As everywhere, EXEC flags could use some work... + * and this could go further with more flags, as desired. + */ + info->dwFlags = (subreq->finfo.protection & APR_UREAD ? 0x001 : 0) + | (subreq->finfo.protection & APR_UWRITE ? 0x002 : 0) + | (subreq->finfo.protection & APR_UEXECUTE ? 0x204 : 0); + return 1; + } + + case HSE_REQ_ABORTIVE_CLOSE: + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02677) + "ServerSupportFunction HSE_REQ_ABORTIVE_CLOSE" + " is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_REQ_GET_CERT_INFO_EX: /* Added in ISAPI 4.0 */ + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02678) + "ServerSupportFunction " + "HSE_REQ_GET_CERT_INFO_EX " + "is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_REQ_SEND_RESPONSE_HEADER_EX: /* Added in ISAPI 4.0 */ + { + HSE_SEND_HEADER_EX_INFO *shi = (HSE_SEND_HEADER_EX_INFO*)buf_data; + + /* Ignore shi->fKeepConn - we don't want the advise + */ + apr_ssize_t ate = send_response_header(cid, shi->pszStatus, + shi->pszHeader, + shi->cchStatus, + shi->cchHeader); + if (ate < 0) { + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } + else if ((apr_size_t)ate < shi->cchHeader) { + apr_bucket_brigade *bb; + apr_bucket *b; + bb = apr_brigade_create(cid->r->pool, c->bucket_alloc); + b = apr_bucket_transient_create(shi->pszHeader + ate, + shi->cchHeader - ate, + c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + b = apr_bucket_flush_create(c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + rv = ap_pass_brigade(cid->r->output_filters, bb); + cid->response_sent = 1; + if (rv != APR_SUCCESS) + ap_log_rerror(APLOG_MARK, APLOG_DEBUG, rv, r, APLOGNO(03179) + "ServerSupportFunction " + "HSE_REQ_SEND_RESPONSE_HEADER_EX " + "ap_pass_brigade failed: %s", r->filename); + return (rv == APR_SUCCESS); + } + /* Deliberately hold off sending 'just the headers' to begin to + * accumulate the body and speed up the overall response, or at + * least wait for the end the session. + */ + return 1; + } + + case HSE_REQ_CLOSE_CONNECTION: /* Added after ISAPI 4.0 */ + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02679) + "ServerSupportFunction " + "HSE_REQ_CLOSE_CONNECTION " + "is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + case HSE_REQ_IS_CONNECTED: /* Added after ISAPI 4.0 */ + /* Returns True if client is connected c.f. MSKB Q188346 + * assuming the identical return mechanism as HSE_REQ_IS_KEEP_CONN + */ + *((int *)buf_data) = (r->connection->aborted == 0); + return 1; + + case HSE_REQ_EXTENSION_TRIGGER: /* Added after ISAPI 4.0 */ + /* Undocumented - defined by the Microsoft Jan '00 Platform SDK + */ + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02680) + "ServerSupportFunction " + "HSE_REQ_EXTENSION_TRIGGER " + "is not supported: %s", r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + + default: + if (cid->dconf.log_unsupported) + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02681) + "ServerSupportFunction (%d) not supported: " + "%s", HSE_code, r->filename); + apr_set_os_error(APR_FROM_OS_ERROR(ERROR_INVALID_PARAMETER)); + return 0; + } +} + +/********************************************************** + * + * ISAPI Module request invocation section + * + **********************************************************/ + +static apr_status_t isapi_handler (request_rec *r) +{ + isapi_dir_conf *dconf; + apr_table_t *e; + apr_status_t rv; + isapi_loaded *isa; + isapi_cid *cid; + const char *val; + apr_uint32_t read; + int res; + + if (strcmp(r->handler, "isapi-isa") + && strcmp(r->handler, "isapi-handler")) { + /* Hang on to the isapi-isa for compatibility with older docs + * (wtf did '-isa' mean in the first place?) but introduce + * a newer and clearer "isapi-handler" name. + */ + return DECLINED; + } + dconf = ap_get_module_config(r->per_dir_config, &isapi_module); + e = r->subprocess_env; + + /* Use similar restrictions as CGIs + * + * If this fails, it's pointless to load the isapi dll. + */ + if (!(ap_allow_options(r) & OPT_EXECCGI)) { + return HTTP_FORBIDDEN; + } + if (r->finfo.filetype == APR_NOFILE) { + return HTTP_NOT_FOUND; + } + if (r->finfo.filetype != APR_REG) { + return HTTP_FORBIDDEN; + } + if ((r->used_path_info == AP_REQ_REJECT_PATH_INFO) && + r->path_info && *r->path_info) { + /* default to accept */ + return HTTP_NOT_FOUND; + } + + if (isapi_lookup(r->pool, r->server, r, r->filename, &isa) + != APR_SUCCESS) { + return HTTP_INTERNAL_SERVER_ERROR; + } + /* Set up variables */ + ap_add_common_vars(r); + ap_add_cgi_vars(r); + apr_table_setn(e, "UNMAPPED_REMOTE_USER", "REMOTE_USER"); + if ((val = apr_table_get(e, "HTTPS")) && (strcmp(val, "on") == 0)) + apr_table_setn(e, "SERVER_PORT_SECURE", "1"); + else + apr_table_setn(e, "SERVER_PORT_SECURE", "0"); + apr_table_setn(e, "URL", r->uri); + + /* Set up connection structure and ecb, + * NULL or zero out most fields. + */ + cid = apr_pcalloc(r->pool, sizeof(isapi_cid)); + + /* Fixup defaults for dconf */ + cid->dconf.read_ahead_buflen = (dconf->read_ahead_buflen == ISAPI_UNDEF) + ? 49152 : dconf->read_ahead_buflen; + cid->dconf.log_unsupported = (dconf->log_unsupported == ISAPI_UNDEF) + ? 0 : dconf->log_unsupported; + cid->dconf.log_to_errlog = (dconf->log_to_errlog == ISAPI_UNDEF) + ? 0 : dconf->log_to_errlog; + cid->dconf.log_to_query = (dconf->log_to_query == ISAPI_UNDEF) + ? 1 : dconf->log_to_query; + cid->dconf.fake_async = (dconf->fake_async == ISAPI_UNDEF) + ? 0 : dconf->fake_async; + + cid->ecb = apr_pcalloc(r->pool, sizeof(EXTENSION_CONTROL_BLOCK)); + cid->ecb->ConnID = cid; + cid->isa = isa; + cid->r = r; + r->status = 0; + + cid->ecb->cbSize = sizeof(EXTENSION_CONTROL_BLOCK); + cid->ecb->dwVersion = isa->report_version; + cid->ecb->dwHttpStatusCode = 0; + strcpy(cid->ecb->lpszLogData, ""); + /* TODO: are copies really needed here? + */ + cid->ecb->lpszMethod = (char*) r->method; + cid->ecb->lpszQueryString = (char*) apr_table_get(e, "QUERY_STRING"); + cid->ecb->lpszPathInfo = (char*) apr_table_get(e, "PATH_INFO"); + cid->ecb->lpszPathTranslated = (char*) apr_table_get(e, "PATH_TRANSLATED"); + cid->ecb->lpszContentType = (char*) apr_table_get(e, "CONTENT_TYPE"); + + /* Set up the callbacks */ + cid->ecb->GetServerVariable = regfnGetServerVariable; + cid->ecb->WriteClient = regfnWriteClient; + cid->ecb->ReadClient = regfnReadClient; + cid->ecb->ServerSupportFunction = regfnServerSupportFunction; + + /* Set up client input */ + res = ap_setup_client_block(r, REQUEST_CHUNKED_ERROR); + if (res) { + return res; + } + + if (ap_should_client_block(r)) { + /* Time to start reading the appropriate amount of data, + * and allow the administrator to tweak the number + */ + if (r->remaining) { + cid->ecb->cbTotalBytes = (apr_size_t)r->remaining; + if (cid->ecb->cbTotalBytes > (apr_uint32_t)cid->dconf.read_ahead_buflen) + cid->ecb->cbAvailable = cid->dconf.read_ahead_buflen; + else + cid->ecb->cbAvailable = cid->ecb->cbTotalBytes; + } + else + { + cid->ecb->cbTotalBytes = 0xffffffff; + cid->ecb->cbAvailable = cid->dconf.read_ahead_buflen; + } + + cid->ecb->lpbData = apr_pcalloc(r->pool, cid->ecb->cbAvailable + 1); + + read = 0; + while (read < cid->ecb->cbAvailable && + ((res = ap_get_client_block(r, (char*)cid->ecb->lpbData + read, + cid->ecb->cbAvailable - read)) > 0)) { + read += res; + } + + if (res < 0) { + return HTTP_INTERNAL_SERVER_ERROR; + } + + /* Although it's not to spec, IIS seems to null-terminate + * its lpdData string. So we will too. + */ + if (res == 0) + cid->ecb->cbAvailable = cid->ecb->cbTotalBytes = read; + else + cid->ecb->cbAvailable = read; + cid->ecb->lpbData[read] = '\0'; + } + else { + cid->ecb->cbTotalBytes = 0; + cid->ecb->cbAvailable = 0; + cid->ecb->lpbData = NULL; + } + + /* To emulate async behavior... + * + * We create a cid->completed mutex and lock on it so that the + * app can believe is it running async. + * + * This request completes upon a notification through + * ServerSupportFunction(HSE_REQ_DONE_WITH_SESSION), which + * unlocks this mutex. If the HttpExtensionProc() returns + * HSE_STATUS_PENDING, we will attempt to gain this lock again + * which may *only* happen once HSE_REQ_DONE_WITH_SESSION has + * unlocked the mutex. + */ + if (cid->dconf.fake_async) { + rv = apr_thread_mutex_create(&cid->completed, + APR_THREAD_MUTEX_UNNESTED, + r->pool); + if (cid->completed && (rv == APR_SUCCESS)) { + rv = apr_thread_mutex_lock(cid->completed); + } + + if (!cid->completed || (rv != APR_SUCCESS)) { + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02112) + "Failed to create completion mutex"); + return HTTP_INTERNAL_SERVER_ERROR; + } + } + + /* All right... try and run the sucker */ + rv = (*isa->HttpExtensionProc)(cid->ecb); + + /* Check for a log message - and log it */ + if (*cid->ecb->lpszLogData) { + ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(02113) + "%s: %s", r->filename, cid->ecb->lpszLogData); + } + + switch(rv) { + case 0: /* Strange, but MS isapi accepts this as success */ + case HSE_STATUS_SUCCESS: + case HSE_STATUS_SUCCESS_AND_KEEP_CONN: + /* Ignore the keepalive stuff; Apache handles it just fine without + * the ISAPI Handler's "advice". + * Per Microsoft: "In IIS versions 4.0 and later, the return + * values HSE_STATUS_SUCCESS and HSE_STATUS_SUCCESS_AND_KEEP_CONN + * are functionally identical: Keep-Alive connections are + * maintained, if supported by the client." + * ... so we were pat all this time + */ + break; + + case HSE_STATUS_PENDING: + /* emulating async behavior... + */ + if (cid->completed) { + /* The completion port was locked prior to invoking + * HttpExtensionProc(). Once we can regain the lock, + * when ServerSupportFunction(HSE_REQ_DONE_WITH_SESSION) + * is called by the extension to release the lock, + * we may finally destroy the request. + */ + (void)apr_thread_mutex_lock(cid->completed); + break; + } + else if (cid->dconf.log_unsupported) { + ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r, APLOGNO(02114) + "asynch I/O result HSE_STATUS_PENDING " + "from HttpExtensionProc() is not supported: %s", + r->filename); + r->status = HTTP_INTERNAL_SERVER_ERROR; + } + break; + + case HSE_STATUS_ERROR: + /* end response if we have yet to do so. + */ + ap_log_rerror(APLOG_MARK, APLOG_WARNING, apr_get_os_error(), r, APLOGNO(02115) + "HSE_STATUS_ERROR result from " + "HttpExtensionProc(): %s", r->filename); + r->status = HTTP_INTERNAL_SERVER_ERROR; + break; + + default: + ap_log_rerror(APLOG_MARK, APLOG_WARNING, apr_get_os_error(), r, APLOGNO(02116) + "unrecognized result code %d " + "from HttpExtensionProc(): %s ", + rv, r->filename); + r->status = HTTP_INTERNAL_SERVER_ERROR; + break; + } + + /* Flush the response now, including headers-only responses */ + if (cid->headers_set || cid->response_sent) { + conn_rec *c = r->connection; + apr_bucket_brigade *bb; + apr_bucket *b; + apr_status_t rv; + + bb = apr_brigade_create(r->pool, c->bucket_alloc); + b = apr_bucket_eos_create(c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, b); + rv = ap_pass_brigade(r->output_filters, bb); + cid->response_sent = 1; + + if (rv != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_DEBUG, rv, r, APLOGNO(02117) + "ap_pass_brigade failed to " + "complete the response: %s ", r->filename); + } + + return OK; /* NOT r->status, even if it has changed. */ + } + + /* As the client returned no error, and if we did not error out + * ourselves, trust dwHttpStatusCode to say something relevant. + */ + if (!ap_is_HTTP_SERVER_ERROR(r->status) && cid->ecb->dwHttpStatusCode) { + r->status = cid->ecb->dwHttpStatusCode; + } + + /* For all missing-response situations simply return the status, + * and let the core respond to the client. + */ + return r->status; +} + +/********************************************************** + * + * ISAPI Module Setup Hooks + * + **********************************************************/ + +static int isapi_pre_config(apr_pool_t *pconf, apr_pool_t *plog, apr_pool_t *ptemp) +{ + apr_status_t rv; + + apr_pool_create_ex(&loaded.pool, pconf, NULL, NULL); + if (!loaded.pool) { + ap_log_error(APLOG_MARK, APLOG_ERR, APR_EGENERAL, NULL, APLOGNO(02118) + "could not create the isapi cache pool"); + return APR_EGENERAL; + } + apr_pool_tag(loaded.pool, "mod_isapi_load"); + + loaded.hash = apr_hash_make(loaded.pool); + if (!loaded.hash) { + ap_log_error(APLOG_MARK, APLOG_ERR, 0, NULL, APLOGNO(02119) + "Failed to create module cache"); + return APR_EGENERAL; + } + + rv = apr_thread_mutex_create(&loaded.lock, APR_THREAD_MUTEX_DEFAULT, + loaded.pool); + if (rv != APR_SUCCESS) { + ap_log_error(APLOG_MARK, APLOG_ERR, rv, NULL, APLOGNO(02682) + "Failed to create module cache lock"); + return rv; + } + return OK; +} + +static void isapi_hooks(apr_pool_t *cont) +{ + ap_hook_pre_config(isapi_pre_config, NULL, NULL, APR_HOOK_MIDDLE); + ap_hook_handler(isapi_handler, NULL, NULL, APR_HOOK_MIDDLE); +} + +AP_DECLARE_MODULE(isapi) = { + STANDARD20_MODULE_STUFF, + create_isapi_dir_config, /* create per-dir config */ + merge_isapi_dir_configs, /* merge per-dir config */ + NULL, /* server config */ + NULL, /* merge server config */ + isapi_cmds, /* command apr_table_t */ + isapi_hooks /* register hooks */ +}; diff --git a/modules/arch/win32/mod_isapi.dep b/modules/arch/win32/mod_isapi.dep new file mode 100644 index 0000000..b36dbcf --- /dev/null +++ b/modules/arch/win32/mod_isapi.dep @@ -0,0 +1,61 @@ +# Microsoft Developer Studio Generated Dependency File, included by mod_isapi.mak + +..\..\..\build\win32\httpd.rc : \ + "..\..\..\include\ap_release.h"\ + + +.\mod_isapi.c : \ + "..\..\..\include\ap_config.h"\ + "..\..\..\include\ap_config_layout.h"\ + "..\..\..\include\ap_expr.h"\ + "..\..\..\include\ap_hooks.h"\ + "..\..\..\include\ap_mmn.h"\ + "..\..\..\include\ap_regex.h"\ + "..\..\..\include\ap_release.h"\ + "..\..\..\include\apache_noprobes.h"\ + "..\..\..\include\http_config.h"\ + "..\..\..\include\http_core.h"\ + "..\..\..\include\http_log.h"\ + "..\..\..\include\http_protocol.h"\ + "..\..\..\include\http_request.h"\ + "..\..\..\include\httpd.h"\ + "..\..\..\include\mod_core.h"\ + "..\..\..\include\os.h"\ + "..\..\..\include\util_cfgtree.h"\ + "..\..\..\include\util_filter.h"\ + "..\..\..\include\util_script.h"\ + "..\..\..\srclib\apr-util\include\apr_buckets.h"\ + "..\..\..\srclib\apr-util\include\apr_hooks.h"\ + "..\..\..\srclib\apr-util\include\apr_optional.h"\ + "..\..\..\srclib\apr-util\include\apr_optional_hooks.h"\ + "..\..\..\srclib\apr-util\include\apr_uri.h"\ + "..\..\..\srclib\apr-util\include\apu.h"\ + "..\..\..\srclib\apr\include\apr.h"\ + "..\..\..\srclib\apr\include\apr_allocator.h"\ + "..\..\..\srclib\apr\include\apr_dso.h"\ + "..\..\..\srclib\apr\include\apr_errno.h"\ + "..\..\..\srclib\apr\include\apr_file_info.h"\ + "..\..\..\srclib\apr\include\apr_file_io.h"\ + "..\..\..\srclib\apr\include\apr_general.h"\ + "..\..\..\srclib\apr\include\apr_global_mutex.h"\ + "..\..\..\srclib\apr\include\apr_hash.h"\ + "..\..\..\srclib\apr\include\apr_inherit.h"\ + "..\..\..\srclib\apr\include\apr_lib.h"\ + "..\..\..\srclib\apr\include\apr_mmap.h"\ + "..\..\..\srclib\apr\include\apr_network_io.h"\ + "..\..\..\srclib\apr\include\apr_poll.h"\ + "..\..\..\srclib\apr\include\apr_pools.h"\ + "..\..\..\srclib\apr\include\apr_portable.h"\ + "..\..\..\srclib\apr\include\apr_proc_mutex.h"\ + "..\..\..\srclib\apr\include\apr_ring.h"\ + "..\..\..\srclib\apr\include\apr_shm.h"\ + "..\..\..\srclib\apr\include\apr_strings.h"\ + "..\..\..\srclib\apr\include\apr_tables.h"\ + "..\..\..\srclib\apr\include\apr_thread_mutex.h"\ + "..\..\..\srclib\apr\include\apr_thread_proc.h"\ + "..\..\..\srclib\apr\include\apr_thread_rwlock.h"\ + "..\..\..\srclib\apr\include\apr_time.h"\ + "..\..\..\srclib\apr\include\apr_user.h"\ + "..\..\..\srclib\apr\include\apr_want.h"\ + ".\mod_isapi.h"\ + diff --git a/modules/arch/win32/mod_isapi.dsp b/modules/arch/win32/mod_isapi.dsp new file mode 100644 index 0000000..39df3e4 --- /dev/null +++ b/modules/arch/win32/mod_isapi.dsp @@ -0,0 +1,115 @@ +# Microsoft Developer Studio Project File - Name="mod_isapi" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102 + +CFG=mod_isapi - Win32 Release +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "mod_isapi.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "mod_isapi.mak" CFG="mod_isapi - Win32 Release" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "mod_isapi - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE "mod_isapi - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +MTL=midl.exe +RSC=rc.exe + +!IF "$(CFG)" == "mod_isapi - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "Release" +# PROP BASE Intermediate_Dir "Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Release" +# PROP Intermediate_Dir "Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c +# ADD CPP /nologo /MD /W3 /O2 /Oy- /Zi /I "../../../include" /I "../../../srclib/apr/include" /I "../../../srclib/apr-util/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /Fd"Release\mod_isapi_src" /FD /c +# ADD BASE MTL /nologo /D "NDEBUG" /win32 +# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /fo"Release/mod_isapi.res" /i "../../../include" /i "../../../srclib/apr/include" /d "NDEBUG" /d BIN_NAME="mod_isapi.so" /d LONG_NAME="isapi_module for Apache" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /out:".\Release\mod_isapi.so" /base:@..\..\..\os\win32\BaseAddr.ref,mod_isapi.so +# ADD LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Release\mod_isapi.so" /base:@..\..\..\os\win32\BaseAddr.ref,mod_isapi.so /opt:ref +# Begin Special Build Tool +TargetPath=.\Release\mod_isapi.so +SOURCE="$(InputPath)" +PostBuild_Desc=Embed .manifest +PostBuild_Cmds=if exist $(TargetPath).manifest mt.exe -manifest $(TargetPath).manifest -outputresource:$(TargetPath);2 +# End Special Build Tool + +!ELSEIF "$(CFG)" == "mod_isapi - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "Debug" +# PROP BASE Intermediate_Dir "Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Debug" +# PROP Intermediate_Dir "Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /EHsc /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /FD /c +# ADD CPP /nologo /MDd /W3 /EHsc /Zi /Od /I "../../../include" /I "../../../srclib/apr/include" /I "../../../srclib/apr-util/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /Fd"Debug\mod_isapi_src" /FD /c +# ADD BASE MTL /nologo /D "_DEBUG" /win32 +# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /fo"Debug/mod_isapi.res" /i "../../../include" /i "../../../srclib/apr/include" /d "_DEBUG" /d BIN_NAME="mod_isapi.so" /d LONG_NAME="isapi_module for Apache" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Debug\mod_isapi.so" /base:@..\..\..\os\win32\BaseAddr.ref,mod_isapi.so +# ADD LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Debug\mod_isapi.so" /base:@..\..\..\os\win32\BaseAddr.ref,mod_isapi.so +# Begin Special Build Tool +TargetPath=.\Debug\mod_isapi.so +SOURCE="$(InputPath)" +PostBuild_Desc=Embed .manifest +PostBuild_Cmds=if exist $(TargetPath).manifest mt.exe -manifest $(TargetPath).manifest -outputresource:$(TargetPath);2 +# End Special Build Tool + +!ENDIF + +# Begin Target + +# Name "mod_isapi - Win32 Release" +# Name "mod_isapi - Win32 Debug" +# Begin Source File + +SOURCE=.\mod_isapi.c +# End Source File +# Begin Source File + +SOURCE=.\mod_isapi.h +# End Source File +# Begin Source File + +SOURCE=..\..\..\build\win32\httpd.rc +# End Source File +# End Target +# End Project diff --git a/modules/arch/win32/mod_isapi.h b/modules/arch/win32/mod_isapi.h new file mode 100644 index 0000000..5284386 --- /dev/null +++ b/modules/arch/win32/mod_isapi.h @@ -0,0 +1,271 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + * @file mod_isapi.h + * @brief ISAPI module extension to Apache + * + * @defgroup MOD_ISAPI mod_isapi + * @ingroup APACHE_MODS + * @{ + */ + +#ifndef MOD_ISAPI_H +#define MOD_ISAPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* The Version Information storage passed to a module on startup + * via the GetExtensionVersion() entry point. + */ +typedef struct HSE_VERSION_INFO { + apr_uint32_t dwExtensionVersion; + char lpszExtensionDesc[256]; +} HSE_VERSION_INFO; + +/* The startup entry point that must be exported by every ISAPI handler + */ +int APR_THREAD_FUNC GetExtensionVersion(HSE_VERSION_INFO *ver_info); +typedef int (APR_THREAD_FUNC *PFN_GETEXTENSIONVERSION)(HSE_VERSION_INFO *ver_info); + +/* Our internal 'HCONN' representation, always opaque to the user. + */ +typedef struct isapi_cid isapi_cid; +typedef struct isapi_cid *HCONN; + +/* Prototypes of the essential functions exposed by mod_isapi + * for the module to communicate with Apache. + */ +typedef int (APR_THREAD_FUNC + *PFN_GETSERVERVARIABLE)(HCONN cid, + char *variable_name, + void *buf_data, + apr_uint32_t *buf_size); +typedef int (APR_THREAD_FUNC + *PFN_WRITECLIENT)(HCONN cid, + void *buf_data, + apr_uint32_t *buf_size, + apr_uint32_t flags); +typedef int (APR_THREAD_FUNC + *PFN_READCLIENT)(HCONN cid, + void *buf_data, + apr_uint32_t *buf_size); +typedef int (APR_THREAD_FUNC + *PFN_SERVERSUPPORTFUNCTION)(HCONN cid, + apr_uint32_t HSE_code, + void *buf_data, + apr_uint32_t *buf_size, + apr_uint32_t *flags); + +/* The ecb structure is passed on each invocation of the module + */ +typedef struct EXTENSION_CONTROL_BLOCK { + apr_uint32_t cbSize; + apr_uint32_t dwVersion; + HCONN ConnID; + apr_uint32_t dwHttpStatusCode; + char lpszLogData[80]; + char *lpszMethod; + char *lpszQueryString; + char *lpszPathInfo; + char *lpszPathTranslated; + apr_uint32_t cbTotalBytes; + apr_uint32_t cbAvailable; + unsigned char *lpbData; + char *lpszContentType; + + PFN_GETSERVERVARIABLE GetServerVariable; + PFN_WRITECLIENT WriteClient; + PFN_READCLIENT ReadClient; + PFN_SERVERSUPPORTFUNCTION ServerSupportFunction; +} EXTENSION_CONTROL_BLOCK; + +/* Status/Headers structure to pass to HSE_SEND_HEADER_EX, + * an MS extension to ServerSupportFunction + */ +typedef struct HSE_SEND_HEADER_EX_INFO { + const char * pszStatus; /* HTTP status text, such as "200 OK" */ + const char * pszHeader; /* HTTP header lines text, such as + * "Content-type: text/plain\r\n" + * "Content-Language: en\r\n" + * Note that (in spite of cchFoo lengths below) + * NULL characters will interfere in headers. + */ + apr_uint32_t cchStatus; /* length of pszStatus text */ + apr_uint32_t cchHeader; /* length of pszHeader text */ + int fKeepConn; /* Ignored: used to set keep-alive status, + * but Apache follows the client's negotiated + * HTTP contract to decide. + */ +} HSE_SEND_HEADER_EX_INFO; + +/* Our only 'supported' MS extended flag bit for TransmitFile, + * HSE_IO_SEND_HEADERS indicates that Status+Headers are present + * in the pszStatusCode member of the HSE_TF_INFO structure. + */ +#define HSE_IO_SEND_HEADERS 8 + +/* The remaining flags are MS extended flag bits that bear little + * relation to Apache; the rules that the Apache server obeys follow + * its own design and HTTP protocol filter rules. + * + * We do not support async, however, we fake it. If HSE_IO_SYNC is + * not passed, and a completion context was defined, we will invoke the + * completion function immediately following the transfer, and then + * return to the caller. If HSE_IO_SYNC is passed, there is no call + * necessary to the completion context. + */ +#define HSE_IO_SYNC 1 +#define HSE_IO_ASYNC 2 +#define HSE_IO_DISCONNECT_AFTER_SEND 4 +#define HSE_IO_NODELAY 4096 + +/* The Completion function prototype. This callback may be fixed with + * the HSE_REQ_IO_COMPLETION ServerSupportFunction call, or overridden + * for the HSE_REQ_TRANSMIT_FILE call. + */ +typedef void (APR_THREAD_FUNC *PFN_HSE_IO_COMPLETION) + (EXTENSION_CONTROL_BLOCK *ecb, + void *ctxt, + apr_uint32_t cbIO, + apr_uint32_t dwError); + +/* TransmitFile structure to pass to HSE_REQ_TRANSMIT_FILE, an MS extension + */ +typedef struct HSE_TF_INFO { + PFN_HSE_IO_COMPLETION pfnHseIO; /* Overrides the default setting of + * HSE_REQ_IO_COMPLETION if not NULL + */ + void *pContext; + apr_os_file_t hFile; /* HANDLE/fd to transmit */ + const char *pszStatusCode; /* Ignored if HSE_IO_SEND_HEADERS is + * not set. Includes HTTP status text + * plus header text lines, such as + * "200 OK\r\n" + * "Content-type: text/plain\r\n" + */ + apr_uint32_t BytesToWrite; /* 0 is write-all */ + apr_uint32_t Offset; /* File Offset */ + void *pHead; /* Prefix with *pHead body text */ + apr_uint32_t HeadLength; /* Length of *pHead body text */ + void *pTail; /* Prefix with *pTail body text */ + apr_uint32_t TailLength; /* Length of *pTail body text */ + apr_uint32_t dwFlags; /* bit flags described above */ +} HSE_TF_INFO; + +typedef struct HSE_URL_MAPEX_INFO { + char lpszPath[260]; + apr_uint32_t dwFlags; + apr_uint32_t cchMatchingPath; + apr_uint32_t cchMatchingURL; + apr_uint32_t dwReserved1; + apr_uint32_t dwReserved2; +} HSE_URL_MAPEX_INFO; + +/* Original ISAPI ServerSupportFunction() HSE_code methods */ +#define HSE_REQ_SEND_URL_REDIRECT_RESP 1 +#define HSE_REQ_SEND_URL 2 +#define HSE_REQ_SEND_RESPONSE_HEADER 3 +#define HSE_REQ_DONE_WITH_SESSION 4 + +/* MS Extended methods to ISAPI ServerSupportFunction() HSE_code */ +#define HSE_REQ_MAP_URL_TO_PATH 1001 /* Emulated */ +#define HSE_REQ_GET_SSPI_INFO 1002 /* Not Supported */ +#define HSE_APPEND_LOG_PARAMETER 1003 /* Supported */ +#define HSE_REQ_IO_COMPLETION 1005 /* Emulated */ +#define HSE_REQ_TRANSMIT_FILE 1006 /* Async Emulated */ +#define HSE_REQ_REFRESH_ISAPI_ACL 1007 /* Not Supported */ +#define HSE_REQ_IS_KEEP_CONN 1008 /* Supported */ +#define HSE_REQ_ASYNC_READ_CLIENT 1010 /* Emulated */ +/* Added with ISAPI 4.0 */ +#define HSE_REQ_GET_IMPERSONATION_TOKEN 1011 /* Not Supported */ +#define HSE_REQ_MAP_URL_TO_PATH_EX 1012 /* Emulated */ +#define HSE_REQ_ABORTIVE_CLOSE 1014 /* Ignored */ +/* Added after ISAPI 4.0 in IIS 5.0 */ +#define HSE_REQ_GET_CERT_INFO_EX 1015 /* Not Supported */ +#define HSE_REQ_SEND_RESPONSE_HEADER_EX 1016 /* Supported (no nulls!) */ +#define HSE_REQ_CLOSE_CONNECTION 1017 /* Ignored */ +#define HSE_REQ_IS_CONNECTED 1018 /* Supported */ +#define HSE_REQ_EXTENSION_TRIGGER 1020 /* Not Supported */ + +/* The request entry point that must be exported by every ISAPI handler + */ +apr_uint32_t APR_THREAD_FUNC HttpExtensionProc(EXTENSION_CONTROL_BLOCK *ecb); +typedef apr_uint32_t (APR_THREAD_FUNC + *PFN_HTTPEXTENSIONPROC)(EXTENSION_CONTROL_BLOCK *ecb); + +/* Allowable return values from HttpExtensionProc (apparently 0 is also + * accepted by MS IIS, and we will respect it as Success.) + * If the HttpExtensionProc returns HSE_STATUS_PENDING, we will create + * a wait mutex and lock on it, until HSE_REQ_DONE_WITH_SESSION is called. + */ +#define HSE_STATUS_SUCCESS 1 +#define HSE_STATUS_SUCCESS_AND_KEEP_CONN 2 /* 1 vs 2 Ignored, we choose */ +#define HSE_STATUS_PENDING 3 /* Emulated (thread lock) */ +#define HSE_STATUS_ERROR 4 + +/* Anticipated error code for common faults within mod_isapi itself + */ +#ifndef ERROR_INSUFFICIENT_BUFFER +#define ERROR_INSUFFICIENT_BUFFER ENOBUFS +#endif +#ifndef ERROR_INVALID_INDEX +#define ERROR_INVALID_INDEX EINVAL +#endif +#ifndef ERROR_INVALID_PARAMETER +#define ERROR_INVALID_PARAMETER EINVAL +#endif +#ifndef ERROR_READ_FAULT +#define ERROR_READ_FAULT EIO +#endif +#ifndef ERROR_WRITE_FAULT +#define ERROR_WRITE_FAULT EIO +#endif +#ifndef ERROR_SUCCESS +#define ERROR_SUCCESS 0 +#endif + +/* Valid flags passed with TerminateExtension() + */ +#define HSE_TERM_MUST_UNLOAD 1 +#define HSE_TERM_ADVISORY_UNLOAD 2 + +/* The shutdown entry point optionally exported by an ISAPI handler, passed + * HSE_TERM_MUST_UNLOAD or HSE_TERM_ADVISORY_UNLOAD. The module may return + * if passed HSE_TERM_ADVISORY_UNLOAD, and the module will remain loaded. + * If the module returns 1 to HSE_TERM_ADVISORY_UNLOAD it is immediately + * unloaded. If the module is passed HSE_TERM_MUST_UNLOAD, its return value + * is ignored. + */ +int APR_THREAD_FUNC TerminateExtension(apr_uint32_t flags); +typedef int (APR_THREAD_FUNC *PFN_TERMINATEEXTENSION)(apr_uint32_t flags); + +/* Module may return 0 if passed HSE_TERM_ADVISORY_UNLOAD, and the module + * will remain loaded, or 1 if it consents to being unloaded. If the module + * is passed HSE_TERM_MUST_UNLOAD, its return value is ignored. + */ +#define HSE_TERM_MUST_UNLOAD 1 +#define HSE_TERM_ADVISORY_UNLOAD 2 + +#ifdef __cplusplus +} +#endif + +#endif /* !MOD_ISAPI_H */ +/** @} */ + diff --git a/modules/arch/win32/mod_isapi.mak b/modules/arch/win32/mod_isapi.mak new file mode 100644 index 0000000..cee9047 --- /dev/null +++ b/modules/arch/win32/mod_isapi.mak @@ -0,0 +1,353 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on mod_isapi.dsp +!IF "$(CFG)" == "" +CFG=mod_isapi - Win32 Release +!MESSAGE No configuration specified. Defaulting to mod_isapi - Win32 Release. +!ENDIF + +!IF "$(CFG)" != "mod_isapi - Win32 Release" && "$(CFG)" != "mod_isapi - Win32 Debug" +!MESSAGE Invalid configuration "$(CFG)" specified. +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "mod_isapi.mak" CFG="mod_isapi - Win32 Release" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "mod_isapi - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE "mod_isapi - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE +!ERROR An invalid configuration is specified. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +!IF "$(CFG)" == "mod_isapi - Win32 Release" + +OUTDIR=.\Release +INTDIR=.\Release +DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep +# Begin Custom Macros +OutDir=.\Release +# End Custom Macros + +!IF "$(RECURSE)" == "0" + +ALL : "$(OUTDIR)\mod_isapi.so" "$(DS_POSTBUILD_DEP)" + +!ELSE + +ALL : "libhttpd - Win32 Release" "libaprutil - Win32 Release" "libapr - Win32 Release" "$(OUTDIR)\mod_isapi.so" "$(DS_POSTBUILD_DEP)" + +!ENDIF + +!IF "$(RECURSE)" == "1" +CLEAN :"libapr - Win32 ReleaseCLEAN" "libaprutil - Win32 ReleaseCLEAN" "libhttpd - Win32 ReleaseCLEAN" +!ELSE +CLEAN : +!ENDIF + -@erase "$(INTDIR)\mod_isapi.obj" + -@erase "$(INTDIR)\mod_isapi.res" + -@erase "$(INTDIR)\mod_isapi_src.idb" + -@erase "$(INTDIR)\mod_isapi_src.pdb" + -@erase "$(OUTDIR)\mod_isapi.exp" + -@erase "$(OUTDIR)\mod_isapi.lib" + -@erase "$(OUTDIR)\mod_isapi.pdb" + -@erase "$(OUTDIR)\mod_isapi.so" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +CPP=cl.exe +CPP_PROJ=/nologo /MD /W3 /Zi /O2 /Oy- /I "../../../include" /I "../../../srclib/apr/include" /I "../../../srclib/apr-util/include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\mod_isapi_src" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +MTL=midl.exe +MTL_PROJ=/nologo /D "NDEBUG" /mktyplib203 /win32 +RSC=rc.exe +RSC_PROJ=/l 0x409 /fo"$(INTDIR)\mod_isapi.res" /i "../../../include" /i "../../../srclib/apr/include" /d "NDEBUG" /d BIN_NAME="mod_isapi.so" /d LONG_NAME="isapi_module for Apache" +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\mod_isapi.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /pdb:"$(OUTDIR)\mod_isapi.pdb" /debug /out:"$(OUTDIR)\mod_isapi.so" /implib:"$(OUTDIR)\mod_isapi.lib" /base:@..\..\..\os\win32\BaseAddr.ref,mod_isapi.so /opt:ref +LINK32_OBJS= \ + "$(INTDIR)\mod_isapi.obj" \ + "$(INTDIR)\mod_isapi.res" \ + "..\..\..\srclib\apr\Release\libapr-1.lib" \ + "..\..\..\srclib\apr-util\Release\libaprutil-1.lib" \ + "..\..\..\Release\libhttpd.lib" + +"$(OUTDIR)\mod_isapi.so" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +TargetPath=.\Release\mod_isapi.so +SOURCE="$(InputPath)" +PostBuild_Desc=Embed .manifest +DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep + +# Begin Custom Macros +OutDir=.\Release +# End Custom Macros + +"$(DS_POSTBUILD_DEP)" : "$(OUTDIR)\mod_isapi.so" + if exist .\Release\mod_isapi.so.manifest mt.exe -manifest .\Release\mod_isapi.so.manifest -outputresource:.\Release\mod_isapi.so;2 + echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)" + +!ELSEIF "$(CFG)" == "mod_isapi - Win32 Debug" + +OUTDIR=.\Debug +INTDIR=.\Debug +DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep +# Begin Custom Macros +OutDir=.\Debug +# End Custom Macros + +!IF "$(RECURSE)" == "0" + +ALL : "$(OUTDIR)\mod_isapi.so" "$(DS_POSTBUILD_DEP)" + +!ELSE + +ALL : "libhttpd - Win32 Debug" "libaprutil - Win32 Debug" "libapr - Win32 Debug" "$(OUTDIR)\mod_isapi.so" "$(DS_POSTBUILD_DEP)" + +!ENDIF + +!IF "$(RECURSE)" == "1" +CLEAN :"libapr - Win32 DebugCLEAN" "libaprutil - Win32 DebugCLEAN" "libhttpd - Win32 DebugCLEAN" +!ELSE +CLEAN : +!ENDIF + -@erase "$(INTDIR)\mod_isapi.obj" + -@erase "$(INTDIR)\mod_isapi.res" + -@erase "$(INTDIR)\mod_isapi_src.idb" + -@erase "$(INTDIR)\mod_isapi_src.pdb" + -@erase "$(OUTDIR)\mod_isapi.exp" + -@erase "$(OUTDIR)\mod_isapi.lib" + -@erase "$(OUTDIR)\mod_isapi.pdb" + -@erase "$(OUTDIR)\mod_isapi.so" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +CPP=cl.exe +CPP_PROJ=/nologo /MDd /W3 /Zi /Od /I "../../../include" /I "../../../srclib/apr/include" /I "../../../srclib/apr-util/include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\mod_isapi_src" /FD /EHsc /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +MTL=midl.exe +MTL_PROJ=/nologo /D "_DEBUG" /mktyplib203 /win32 +RSC=rc.exe +RSC_PROJ=/l 0x409 /fo"$(INTDIR)\mod_isapi.res" /i "../../../include" /i "../../../srclib/apr/include" /d "_DEBUG" /d BIN_NAME="mod_isapi.so" /d LONG_NAME="isapi_module for Apache" +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\mod_isapi.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /pdb:"$(OUTDIR)\mod_isapi.pdb" /debug /out:"$(OUTDIR)\mod_isapi.so" /implib:"$(OUTDIR)\mod_isapi.lib" /base:@..\..\..\os\win32\BaseAddr.ref,mod_isapi.so +LINK32_OBJS= \ + "$(INTDIR)\mod_isapi.obj" \ + "$(INTDIR)\mod_isapi.res" \ + "..\..\..\srclib\apr\Debug\libapr-1.lib" \ + "..\..\..\srclib\apr-util\Debug\libaprutil-1.lib" \ + "..\..\..\Debug\libhttpd.lib" + +"$(OUTDIR)\mod_isapi.so" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +TargetPath=.\Debug\mod_isapi.so +SOURCE="$(InputPath)" +PostBuild_Desc=Embed .manifest +DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep + +# Begin Custom Macros +OutDir=.\Debug +# End Custom Macros + +"$(DS_POSTBUILD_DEP)" : "$(OUTDIR)\mod_isapi.so" + if exist .\Debug\mod_isapi.so.manifest mt.exe -manifest .\Debug\mod_isapi.so.manifest -outputresource:.\Debug\mod_isapi.so;2 + echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)" + +!ENDIF + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("mod_isapi.dep") +!INCLUDE "mod_isapi.dep" +!ELSE +!MESSAGE Warning: cannot find "mod_isapi.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "mod_isapi - Win32 Release" || "$(CFG)" == "mod_isapi - Win32 Debug" + +!IF "$(CFG)" == "mod_isapi - Win32 Release" + +"libapr - Win32 Release" : + cd ".\..\..\..\srclib\apr" + $(MAKE) /$(MAKEFLAGS) /F ".\libapr.mak" CFG="libapr - Win32 Release" + cd "..\..\modules\arch\win32" + +"libapr - Win32 ReleaseCLEAN" : + cd ".\..\..\..\srclib\apr" + $(MAKE) /$(MAKEFLAGS) /F ".\libapr.mak" CFG="libapr - Win32 Release" RECURSE=1 CLEAN + cd "..\..\modules\arch\win32" + +!ELSEIF "$(CFG)" == "mod_isapi - Win32 Debug" + +"libapr - Win32 Debug" : + cd ".\..\..\..\srclib\apr" + $(MAKE) /$(MAKEFLAGS) /F ".\libapr.mak" CFG="libapr - Win32 Debug" + cd "..\..\modules\arch\win32" + +"libapr - Win32 DebugCLEAN" : + cd ".\..\..\..\srclib\apr" + $(MAKE) /$(MAKEFLAGS) /F ".\libapr.mak" CFG="libapr - Win32 Debug" RECURSE=1 CLEAN + cd "..\..\modules\arch\win32" + +!ENDIF + +!IF "$(CFG)" == "mod_isapi - Win32 Release" + +"libaprutil - Win32 Release" : + cd ".\..\..\..\srclib\apr-util" + $(MAKE) /$(MAKEFLAGS) /F ".\libaprutil.mak" CFG="libaprutil - Win32 Release" + cd "..\..\modules\arch\win32" + +"libaprutil - Win32 ReleaseCLEAN" : + cd ".\..\..\..\srclib\apr-util" + $(MAKE) /$(MAKEFLAGS) /F ".\libaprutil.mak" CFG="libaprutil - Win32 Release" RECURSE=1 CLEAN + cd "..\..\modules\arch\win32" + +!ELSEIF "$(CFG)" == "mod_isapi - Win32 Debug" + +"libaprutil - Win32 Debug" : + cd ".\..\..\..\srclib\apr-util" + $(MAKE) /$(MAKEFLAGS) /F ".\libaprutil.mak" CFG="libaprutil - Win32 Debug" + cd "..\..\modules\arch\win32" + +"libaprutil - Win32 DebugCLEAN" : + cd ".\..\..\..\srclib\apr-util" + $(MAKE) /$(MAKEFLAGS) /F ".\libaprutil.mak" CFG="libaprutil - Win32 Debug" RECURSE=1 CLEAN + cd "..\..\modules\arch\win32" + +!ENDIF + +!IF "$(CFG)" == "mod_isapi - Win32 Release" + +"libhttpd - Win32 Release" : + cd ".\..\..\.." + $(MAKE) /$(MAKEFLAGS) /F ".\libhttpd.mak" CFG="libhttpd - Win32 Release" + cd ".\modules\arch\win32" + +"libhttpd - Win32 ReleaseCLEAN" : + cd ".\..\..\.." + $(MAKE) /$(MAKEFLAGS) /F ".\libhttpd.mak" CFG="libhttpd - Win32 Release" RECURSE=1 CLEAN + cd ".\modules\arch\win32" + +!ELSEIF "$(CFG)" == "mod_isapi - Win32 Debug" + +"libhttpd - Win32 Debug" : + cd ".\..\..\.." + $(MAKE) /$(MAKEFLAGS) /F ".\libhttpd.mak" CFG="libhttpd - Win32 Debug" + cd ".\modules\arch\win32" + +"libhttpd - Win32 DebugCLEAN" : + cd ".\..\..\.." + $(MAKE) /$(MAKEFLAGS) /F ".\libhttpd.mak" CFG="libhttpd - Win32 Debug" RECURSE=1 CLEAN + cd ".\modules\arch\win32" + +!ENDIF + +SOURCE=..\..\..\build\win32\httpd.rc + +!IF "$(CFG)" == "mod_isapi - Win32 Release" + + +"$(INTDIR)\mod_isapi.res" : $(SOURCE) "$(INTDIR)" + $(RSC) /l 0x409 /fo"$(INTDIR)\mod_isapi.res" /i "../../../include" /i "../../../srclib/apr/include" /i "../../../build\win32" /d "NDEBUG" /d BIN_NAME="mod_isapi.so" /d LONG_NAME="isapi_module for Apache" $(SOURCE) + + +!ELSEIF "$(CFG)" == "mod_isapi - Win32 Debug" + + +"$(INTDIR)\mod_isapi.res" : $(SOURCE) "$(INTDIR)" + $(RSC) /l 0x409 /fo"$(INTDIR)\mod_isapi.res" /i "../../../include" /i "../../../srclib/apr/include" /i "../../../build\win32" /d "_DEBUG" /d BIN_NAME="mod_isapi.so" /d LONG_NAME="isapi_module for Apache" $(SOURCE) + + +!ENDIF + +SOURCE=.\mod_isapi.c + +"$(INTDIR)\mod_isapi.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/modules/arch/win32/mod_win32.c b/modules/arch/win32/mod_win32.c new file mode 100644 index 0000000..bddc60d --- /dev/null +++ b/modules/arch/win32/mod_win32.c @@ -0,0 +1,563 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifdef WIN32 + +#include "apr_strings.h" +#include "apr_portable.h" +#include "apr_buckets.h" +#include "ap_config.h" +#include "httpd.h" +#include "http_config.h" +#include "http_core.h" +#include "http_protocol.h" +#include "http_request.h" +#include "http_log.h" +#include "util_script.h" +#include "mod_core.h" +#include "mod_cgi.h" +#include "apr_lib.h" +#include "ap_regkey.h" + +/* + * CGI Script stuff for Win32... + */ +typedef enum { eFileTypeUNKNOWN, eFileTypeBIN, eFileTypeEXE16, eFileTypeEXE32, + eFileTypeSCRIPT } file_type_e; +typedef enum { INTERPRETER_SOURCE_UNSET, INTERPRETER_SOURCE_REGISTRY_STRICT, + INTERPRETER_SOURCE_REGISTRY, INTERPRETER_SOURCE_SHEBANG + } interpreter_source_e; +AP_DECLARE(file_type_e) ap_get_win32_interpreter(const request_rec *, + char **interpreter, + char **arguments); + +module AP_MODULE_DECLARE_DATA win32_module; + +typedef struct { + /* Where to find interpreter to run scripts */ + interpreter_source_e script_interpreter_source; +} win32_dir_conf; + +static void *create_win32_dir_config(apr_pool_t *p, char *dir) +{ + win32_dir_conf *conf; + conf = (win32_dir_conf*)apr_palloc(p, sizeof(win32_dir_conf)); + conf->script_interpreter_source = INTERPRETER_SOURCE_UNSET; + return conf; +} + +static void *merge_win32_dir_configs(apr_pool_t *p, void *basev, void *addv) +{ + win32_dir_conf *new; + win32_dir_conf *base = (win32_dir_conf *) basev; + win32_dir_conf *add = (win32_dir_conf *) addv; + + new = (win32_dir_conf *) apr_pcalloc(p, sizeof(win32_dir_conf)); + new->script_interpreter_source = (add->script_interpreter_source + != INTERPRETER_SOURCE_UNSET) + ? add->script_interpreter_source + : base->script_interpreter_source; + return new; +} + +static const char *set_interpreter_source(cmd_parms *cmd, void *dv, + char *arg) +{ + win32_dir_conf *d = (win32_dir_conf *)dv; + if (!strcasecmp(arg, "registry")) { + d->script_interpreter_source = INTERPRETER_SOURCE_REGISTRY; + } + else if (!strcasecmp(arg, "registry-strict")) { + d->script_interpreter_source = INTERPRETER_SOURCE_REGISTRY_STRICT; + } + else if (!strcasecmp(arg, "script")) { + d->script_interpreter_source = INTERPRETER_SOURCE_SHEBANG; + } + else { + return apr_pstrcat(cmd->temp_pool, "ScriptInterpreterSource \"", arg, + "\" must be \"registry\", \"registry-strict\" or " + "\"script\"", NULL); + } + return NULL; +} + +/* XXX: prep_string should translate the string into unicode, + * such that it is compatible with whatever codepage the client + * will read characters 80-ff. For the moment, use the unicode + * values 0080-00ff. This isn't trivial, since the code page + * varies between msdos and Windows applications. + * For subsystem 2 [GUI] the default is the system Ansi CP. + * For subsystem 3 [CLI] the default is the system OEM CP. + */ +static void prep_string(const char ** str, apr_pool_t *p) +{ + const char *ch = *str; + char *ch2; + apr_size_t widen = 0; + + if (!ch) { + return; + } + while (*ch) { + if (*(ch++) & 0x80) { + ++widen; + } + } + if (!widen) { + return; + } + widen += (ch - *str) + 1; + ch = *str; + *str = ch2 = apr_palloc(p, widen); + while (*ch) { + if (*ch & 0x80) { + /* sign extension won't hurt us here */ + *(ch2++) = 0xC0 | ((*ch >> 6) & 0x03); + *(ch2++) = 0x80 | (*(ch++) & 0x3f); + } + else { + *(ch2++) = *(ch++); + } + } + *(ch2++) = '\0'; +} + +/* Somewhat more exciting ... figure out where the registry has stashed the + * ExecCGI or Open command - it may be nested one level deep (or more???) + */ +static char* get_interpreter_from_win32_registry(apr_pool_t *p, + const char* ext, + int strict) +{ + apr_status_t rv; + ap_regkey_t *name_key = NULL; + ap_regkey_t *type_key; + ap_regkey_t *key; + char execcgi_path[] = "SHELL\\EXECCGI\\COMMAND"; + char execopen_path[] = "SHELL\\OPEN\\COMMAND"; + char *type_name; + char *buffer; + + if (!ext) { + return NULL; + } + /* + * Future optimization: + * When the registry is successfully searched, store the strings for + * interpreter and arguments in an ext hash to speed up subsequent look-ups + */ + + /* Open the key associated with the script filetype extension */ + rv = ap_regkey_open(&type_key, AP_REGKEY_CLASSES_ROOT, ext, APR_READ, p); + + if (rv != APR_SUCCESS) { + return NULL; + } + + /* Retrieve the name of the script filetype extension */ + rv = ap_regkey_value_get(&type_name, type_key, "", p); + + if (rv == APR_SUCCESS && type_name[0]) { + /* Open the key associated with the script filetype extension */ + rv = ap_regkey_open(&name_key, AP_REGKEY_CLASSES_ROOT, type_name, + APR_READ, p); + } + + /* Open the key for the script command path by: + * + * 1) the 'named' filetype key for ExecCGI/Command + * 2) the extension's type key for ExecCGI/Command + * + * and if the strict arg is false, then continue trying: + * + * 3) the 'named' filetype key for Open/Command + * 4) the extension's type key for Open/Command + */ + + if (name_key) { + if ((rv = ap_regkey_open(&key, name_key, execcgi_path, APR_READ, p)) + == APR_SUCCESS) { + rv = ap_regkey_value_get(&buffer, key, "", p); + ap_regkey_close(name_key); + } + } + + if (!name_key || (rv != APR_SUCCESS)) { + if ((rv = ap_regkey_open(&key, type_key, execcgi_path, APR_READ, p)) + == APR_SUCCESS) { + rv = ap_regkey_value_get(&buffer, key, "", p); + ap_regkey_close(type_key); + } + } + + if (!strict && name_key && (rv != APR_SUCCESS)) { + if ((rv = ap_regkey_open(&key, name_key, execopen_path, APR_READ, p)) + == APR_SUCCESS) { + rv = ap_regkey_value_get(&buffer, key, "", p); + ap_regkey_close(name_key); + } + } + + if (!strict && (rv != APR_SUCCESS)) { + if ((rv = ap_regkey_open(&key, type_key, execopen_path, APR_READ, p)) + == APR_SUCCESS) { + rv = ap_regkey_value_get(&buffer, key, "", p); + ap_regkey_close(type_key); + } + } + + if (name_key) { + ap_regkey_close(name_key); + } + + ap_regkey_close(type_key); + + if (rv != APR_SUCCESS || !buffer[0]) { + return NULL; + } + + return buffer; +} + + +static apr_array_header_t *split_argv(apr_pool_t *p, const char *interp, + const char *cgiprg, const char *cgiargs) +{ + apr_array_header_t *args = apr_array_make(p, 8, sizeof(char*)); + char *d = apr_palloc(p, strlen(interp)+1); + const char *ch = interp; + const char **arg; + int prgtaken = 0; + int argtaken = 0; + int inquo; + int sl; + + while (*ch) { + /* Skip on through Deep Space */ + if (apr_isspace(*ch)) { + ++ch; continue; + } + /* One Arg */ + if (((*ch == '$') || (*ch == '%')) && (*(ch + 1) == '*')) { + const char *cgiarg = cgiargs; + argtaken = 1; + for (;;) { + char *w = ap_getword_nulls(p, &cgiarg, '+'); + if (!*w) { + break; + } + ap_unescape_url(w); + prep_string((const char**)&w, p); + arg = (const char**)apr_array_push(args); + *arg = ap_escape_shell_cmd(p, w); + } + ch += 2; + continue; + } + if (((*ch == '$') || (*ch == '%')) && (*(ch + 1) == '1')) { + /* Todo: Make short name!!! */ + prgtaken = 1; + arg = (const char**)apr_array_push(args); + if (*ch == '%') { + char *repl = apr_pstrdup(p, cgiprg); + *arg = repl; + while ((repl = strchr(repl, '/'))) { + *repl++ = '\\'; + } + } + else { + *arg = cgiprg; + } + ch += 2; + continue; + } + if ((*ch == '\"') && ((*(ch + 1) == '$') + || (*(ch + 1) == '%')) && (*(ch + 2) == '1') + && (*(ch + 3) == '\"')) { + prgtaken = 1; + arg = (const char**)apr_array_push(args); + if (*(ch + 1) == '%') { + char *repl = apr_pstrdup(p, cgiprg); + *arg = repl; + while ((repl = strchr(repl, '/'))) { + *repl++ = '\\'; + } + } + else { + *arg = cgiprg; + } + ch += 4; + continue; + } + arg = (const char**)apr_array_push(args); + *arg = d; + inquo = 0; + while (*ch) { + if (apr_isspace(*ch) && !inquo) { + ++ch; break; + } + /* Get 'em backslashes */ + for (sl = 0; *ch == '\\'; ++sl) { + *d++ = *ch++; + } + if (sl & 1) { + /* last unmatched '\' + '"' sequence is a '"' */ + if (*ch == '\"') { + *(d - 1) = *ch++; + } + continue; + } + if (*ch == '\"') { + /* '""' sequence within quotes is a '"' */ + if (*++ch == '\"' && inquo) { + *d++ = *ch++; continue; + } + /* Flip quote state */ + inquo = !inquo; + if (apr_isspace(*ch) && !inquo) { + ++ch; break; + } + /* All other '"'s are Munched */ + continue; + } + /* Anything else is, well, something else */ + *d++ = *ch++; + } + /* Term that arg, already pushed on args */ + *d++ = '\0'; + } + + if (!prgtaken) { + arg = (const char**)apr_array_push(args); + *arg = cgiprg; + } + + if (!argtaken) { + const char *cgiarg = cgiargs; + for (;;) { + char *w = ap_getword_nulls(p, &cgiarg, '+'); + if (!*w) { + break; + } + ap_unescape_url(w); + prep_string((const char**)&w, p); + arg = (const char**)apr_array_push(args); + *arg = ap_escape_shell_cmd(p, w); + } + } + + arg = (const char**)apr_array_push(args); + *arg = NULL; + + return args; +} + + +static apr_status_t ap_cgi_build_command(const char **cmd, const char ***argv, + request_rec *r, apr_pool_t *p, + cgi_exec_info_t *e_info) +{ + const apr_array_header_t *elts_arr = apr_table_elts(r->subprocess_env); + const apr_table_entry_t *elts = (apr_table_entry_t *) elts_arr->elts; + const char *ext = NULL; + const char *interpreter = NULL; + win32_dir_conf *d; + apr_file_t *fh; + const char *args = ""; + int i; + + d = (win32_dir_conf *)ap_get_module_config(r->per_dir_config, + &win32_module); + + if (e_info->cmd_type) { + /* We have to consider that the client gets any QUERY_ARGS + * without any charset interpretation, use prep_string to + * create a string of the literal QUERY_ARGS bytes. + */ + *cmd = r->filename; + if (r->args && r->args[0] && !ap_strchr_c(r->args, '=')) { + args = r->args; + } + } + /* Handle the complete file name, we DON'T want to follow suexec, since + * an unrooted command is as predictable as shooting craps in Win32. + * Notice that unlike most mime extension parsing, we have to use the + * win32 parsing here, therefore the final extension is the only one + * we will consider. + */ + ext = strrchr(apr_filepath_name_get(*cmd), '.'); + + /* If the file has an extension and it is not .com and not .exe and + * we've been instructed to search the registry, then do so. + * Let apr_proc_create do all of the .bat/.cmd dirty work. + */ + if (ext && (!strcasecmp(ext,".exe") || !strcasecmp(ext,".com") + || !strcasecmp(ext,".bat") || !strcasecmp(ext,".cmd"))) { + interpreter = ""; + } + if (!interpreter && ext + && (d->script_interpreter_source + == INTERPRETER_SOURCE_REGISTRY + || d->script_interpreter_source + == INTERPRETER_SOURCE_REGISTRY_STRICT)) { + /* Check the registry */ + int strict = (d->script_interpreter_source + == INTERPRETER_SOURCE_REGISTRY_STRICT); + interpreter = get_interpreter_from_win32_registry(r->pool, ext, + strict); + if (interpreter && e_info->cmd_type != APR_SHELLCMD) { + e_info->cmd_type = APR_PROGRAM_PATH; + } + else { + ap_log_error(APLOG_MARK, APLOG_INFO, 0, r->server, + strict ? APLOGNO(03180) "No ExecCGI verb found for files of type '%s'." + : APLOGNO(03181) "No ExecCGI or Open verb found for files of type '%s'.", + ext); + } + } + if (!interpreter) { + apr_status_t rv; + char buffer[1024]; + apr_size_t bytes = sizeof(buffer); + apr_size_t i; + + /* Need to peek into the file figure out what it really is... + * ### aught to go back and build a cache for this one of these days. + */ + if ((rv = apr_file_open(&fh, *cmd, APR_READ | APR_BUFFERED, + APR_OS_DEFAULT, r->pool)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, APLOGNO(02100) + "Failed to open cgi file %s for testing", *cmd); + return rv; + } + if ((rv = apr_file_read(fh, buffer, &bytes)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, APLOGNO(02101) + "Failed to read cgi file %s for testing", *cmd); + return rv; + } + apr_file_close(fh); + + /* Some twisted character [no pun intended] at MS decided that a + * zero width joiner as the lead wide character would be ideal for + * describing Unicode text files. This was further convoluted to + * another MSism that the same character mapped into utf-8, EF BB BF + * would signify utf-8 text files. + * + * Since MS configuration files are all protecting utf-8 encoded + * Unicode path, file and resource names, we already have the correct + * WinNT encoding. But at least eat the stupid three bytes up front. + * + * ### A more thorough check would also allow UNICODE text in buf, and + * convert it to UTF-8 for invoking unicode scripts. Those are few + * and far between, so leave that code an enterprising soul with a need. + */ + if ((bytes >= 3) && memcmp(buffer, "\xEF\xBB\xBF", 3) == 0) { + memmove(buffer, buffer + 3, bytes -= 3); + } + + /* Script or executable, that is the question... + * we check here also for '! so that .vbs scripts can work as CGI. + */ + if ((bytes >= 2) && ((buffer[0] == '#') || (buffer[0] == '\'')) + && (buffer[1] == '!')) { + /* Assuming file is a script since it starts with a shebang */ + for (i = 2; i < bytes; i++) { + if ((buffer[i] == '\r') || (buffer[i] == '\n')) { + buffer[i] = '\0'; + break; + } + } + if (i < bytes) { + interpreter = buffer + 2; + while (apr_isspace(*interpreter)) { + ++interpreter; + } + if (e_info->cmd_type != APR_SHELLCMD) { + e_info->cmd_type = APR_PROGRAM_PATH; + } + } + } + else if (bytes >= sizeof(IMAGE_DOS_HEADER)) { + /* Not a script, is it an executable? */ + IMAGE_DOS_HEADER *hdr = (IMAGE_DOS_HEADER*)buffer; + if (hdr->e_magic == IMAGE_DOS_SIGNATURE) { + if (hdr->e_lfarlc < 0x40) { + /* Ought to invoke this 16 bit exe by a stub, (cmd /c?) */ + interpreter = ""; + } + else { + interpreter = ""; + } + } + } + } + if (!interpreter) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(02102) + "%s is not executable; ensure interpreted scripts have " + "\"#!\" or \"'!\" first line", *cmd); + return APR_EBADF; + } + + *argv = (const char **)(split_argv(p, interpreter, *cmd, + args)->elts); + *cmd = (*argv)[0]; + + e_info->detached = 1; + + /* XXX: Must fix r->subprocess_env to follow utf-8 conventions from + * the client's octets so that win32 apr_proc_create is happy. + * The -best- way is to determine if the .exe is unicode aware + * (using 0x0080-0x00ff) or is linked as a command or windows + * application (following the OEM or Ansi code page in effect.) + */ + for (i = 0; i < elts_arr->nelts; ++i) { + if (elts[i].key && *elts[i].key && *elts[i].val + && !(strncmp(elts[i].key, "REMOTE_", 7) == 0 + || strcmp(elts[i].key, "GATEWAY_INTERFACE") == 0 + || strcmp(elts[i].key, "REQUEST_METHOD") == 0 + || strcmp(elts[i].key, "SERVER_ADDR") == 0 + || strcmp(elts[i].key, "SERVER_PORT") == 0 + || strcmp(elts[i].key, "SERVER_PROTOCOL") == 0)) { + prep_string((const char**) &elts[i].val, r->pool); + } + } + return APR_SUCCESS; +} + +static void register_hooks(apr_pool_t *p) +{ + APR_REGISTER_OPTIONAL_FN(ap_cgi_build_command); +} + +static const command_rec win32_cmds[] = { +AP_INIT_TAKE1("ScriptInterpreterSource", set_interpreter_source, NULL, + OR_FILEINFO, + "Where to find interpreter to run Win32 scripts " + "(Registry or script shebang line)"), +{ NULL } +}; + +AP_DECLARE_MODULE(win32) = { + STANDARD20_MODULE_STUFF, + create_win32_dir_config, /* create per-dir config */ + merge_win32_dir_configs, /* merge per-dir config */ + NULL, /* server config */ + NULL, /* merge server config */ + win32_cmds, /* command apr_table_t */ + register_hooks /* register hooks */ +}; + +#endif /* defined WIN32 */ |