Adding upstream version 1:9.16.44.upstream/1%9.16.44

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 547 insertions, 0 deletions

diff --git a/bin/tests/system/xfer/tests.sh b/bin/tests/system/xfer/tests.sh
new file mode 100755
index 0000000..607d68a
--- /dev/null
+++ b/bin/tests/system/xfer/tests.sh
@@ -0,0 +1,547 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+SYSTEMTESTTOP=..
+. $SYSTEMTESTTOP/conf.sh
+
+DIGOPTS="+tcp +noadd +nosea +nostat +noquest +nocomm +nocmd -p ${PORT}"
+RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s"
+
+status=0
+n=0
+
+n=$((n+1))
+echo_i "testing basic zone transfer functionality (from primary) ($n)"
+tmp=0
+$DIG $DIGOPTS example. @10.53.0.2 axfr > dig.out.ns2.test$n || tmp=1
+grep "^;" dig.out.ns2.test$n | cat_i
+digcomp dig1.good dig.out.ns2.test$n || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "testing basic zone transfer functionality (from secondary) ($n)"
+tmp=0
+#
+# Spin to allow the zone to transfer.
+#
+wait_for_xfer () {
+	$DIG $DIGOPTS example. @10.53.0.3 axfr > dig.out.ns3.test$n || return 1
+	grep "^;" dig.out.ns3.test$n > /dev/null && return 1
+	return 0
+}
+retry_quiet 25 wait_for_xfer || tmp=1
+grep "^;" dig.out.ns3.test$n | cat_i
+digcomp dig1.good dig.out.ns3.test$n || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "testing TSIG signed zone transfers ($n)"
+tmp=0
+$DIG $DIGOPTS tsigzone. @10.53.0.2 axfr -y tsigzone.:1234abcd8765 > dig.out.ns2.test$n || tmp=1
+grep "^;" dig.out.ns2.test$n | cat_i
+
+#
+# Spin to allow the zone to transfer.
+#
+wait_for_xfer_tsig () {
+	$DIG $DIGOPTS tsigzone. @10.53.0.3 axfr -y tsigzone.:1234abcd8765 > dig.out.ns3.test$n || return 1
+	grep "^;" dig.out.ns3.test$n > /dev/null && return 1
+	return 0
+}
+retry_quiet 25 wait_for_xfer_tsig || tmp=1
+grep "^;" dig.out.ns3.test$n | cat_i
+digcomp dig.out.ns2.test$n dig.out.ns3.test$n || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+echo_i "reload servers for in preparation for ixfr-from-differences tests"
+
+rndc_reload ns1 10.53.0.1
+rndc_reload ns2 10.53.0.2
+rndc_reload ns3 10.53.0.3
+rndc_reload ns6 10.53.0.6
+rndc_reload ns7 10.53.0.7
+
+sleep 2
+
+echo_i "updating primary zones for ixfr-from-differences tests"
+
+$PERL -i -p -e '
+	s/0\.0\.0\.0/0.0.0.1/;
+	s/1397051952/1397051953/
+' ns1/sec.db
+
+rndc_reload ns1 10.53.0.1
+
+$PERL -i -p -e '
+	s/0\.0\.0\.0/0.0.0.1/;
+	s/1397051952/1397051953/
+' ns2/example.db
+
+rndc_reload ns2 10.53.0.2
+
+$PERL -i -p -e '
+	s/0\.0\.0\.0/0.0.0.1/;
+	s/1397051952/1397051953/
+' ns6/primary.db
+
+rndc_reload ns6 10.53.0.6
+
+$PERL -i -p -e '
+	s/0\.0\.0\.0/0.0.0.1/;
+	s/1397051952/1397051953/
+' ns7/primary2.db
+
+rndc_reload ns7 10.53.0.7
+
+sleep 3
+
+n=$((n+1))
+echo_i "testing zone is dumped after successful transfer ($n)"
+tmp=0
+$DIG $DIGOPTS +noall +answer +multi @10.53.0.2 \
+	secondary. soa > dig.out.ns2.test$n || tmp=1
+grep "1397051952 ; serial" dig.out.ns2.test$n > /dev/null 2>&1 || tmp=1
+grep "1397051952 ; serial" ns2/sec.db > /dev/null 2>&1 || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "testing ixfr-from-differences yes; ($n)"
+tmp=0
+
+echo_i "wait for reloads..."
+wait_for_reloads() (
+	$DIG $DIGOPTS @10.53.0.6 +noall +answer soa primary > dig.out.soa1.ns6.test$n
+	grep "1397051953" dig.out.soa1.ns6.test$n > /dev/null || return 1
+	$DIG $DIGOPTS @10.53.0.1 +noall +answer soa secondary  > dig.out.soa2.ns1.test$n
+	grep "1397051953" dig.out.soa2.ns1.test$n > /dev/null || return 1
+	$DIG $DIGOPTS @10.53.0.2 +noall +answer soa example > dig.out.soa3.ns2.test$n
+	grep "1397051953" dig.out.soa3.ns2.test$n > /dev/null || return 1
+	return 0
+)
+retry_quiet 20 wait_for_reloads || tmp=1
+
+echo_i "wait for transfers..."
+wait_for_transfers() (
+	a=0 b=0 c=0 d=0
+	$DIG $DIGOPTS @10.53.0.3 +noall +answer soa example > dig.out.soa1.ns3.test$n
+	grep "1397051953" dig.out.soa1.ns3.test$n > /dev/null && a=1
+	$DIG $DIGOPTS @10.53.0.3 +noall +answer soa primary > dig.out.soa2.ns3.test$n
+	grep "1397051953" dig.out.soa2.ns3.test$n > /dev/null && b=1
+	$DIG $DIGOPTS @10.53.0.6 +noall +answer soa secondary > dig.out.soa3.ns6.test$n
+	grep "1397051953" dig.out.soa3.ns6.test$n > /dev/null && c=1
+	[ $a -eq 1 -a $b -eq 1 -a $c -eq 1 ] && return 0
+
+	# re-notify if necessary
+	$RNDCCMD 10.53.0.6 notify primary 2>&1 | sed 's/^/ns6 /' | cat_i
+	$RNDCCMD 10.53.0.1 notify secondary 2>&1 | sed 's/^/ns1 /' | cat_i
+	$RNDCCMD 10.53.0.2 notify example 2>&1 | sed 's/^/ns2 /' | cat_i
+	return 1
+)
+retry_quiet 20 wait_for_transfers || tmp=1
+
+$DIG $DIGOPTS example. \
+	@10.53.0.3 axfr > dig.out.ns3.test$n || tmp=1
+grep "^;" dig.out.ns3.test$n | cat_i
+
+digcomp dig2.good dig.out.ns3.test$n || tmp=1
+
+# ns3 has a journal iff it received an IXFR.
+test -f ns3/example.bk || tmp=1
+test -f ns3/example.bk.jnl || tmp=1
+
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "testing ixfr-from-differences primary; (primary zone) ($n)"
+tmp=0
+
+$DIG $DIGOPTS primary. \
+	@10.53.0.6 axfr > dig.out.ns6.test$n || tmp=1
+grep "^;" dig.out.ns6.test$n | cat_i
+
+$DIG $DIGOPTS primary. \
+	@10.53.0.3 axfr > dig.out.ns3.test$n || tmp=1
+grep "^;" dig.out.ns3.test$n > /dev/null && cat_i dig.out.ns3.test$n
+
+digcomp dig.out.ns6.test$n dig.out.ns3.test$n || tmp=1
+
+# ns3 has a journal iff it received an IXFR.
+test -f ns3/primary.bk || tmp=1
+test -f ns3/primary.bk.jnl || tmp=1
+
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "testing ixfr-from-differences primary; (secondary zone) ($n)"
+tmp=0
+
+$DIG $DIGOPTS secondary. \
+	@10.53.0.6 axfr > dig.out.ns6.test$n || tmp=1
+grep "^;" dig.out.ns6.test$n | cat_i
+
+$DIG $DIGOPTS secondary. \
+	@10.53.0.1 axfr > dig.out.ns1.test$n || tmp=1
+grep "^;" dig.out.ns1.test$n | cat_i
+
+digcomp dig.out.ns6.test$n dig.out.ns1.test$n || tmp=1
+
+# ns6 has a journal iff it received an IXFR.
+test -f ns6/sec.bk || tmp=1
+test -f ns6/sec.bk.jnl && tmp=1
+
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "testing ixfr-from-differences secondary; (secondary zone) ($n)"
+tmp=0
+
+# ns7 has a journal iff it generates an IXFR.
+test -f ns7/primary2.db || tmp=1
+test -f ns7/primary2.db.jnl && tmp=1
+
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "testing ixfr-from-differences secondary; (secondary zone) ($n)"
+tmp=0
+
+$DIG $DIGOPTS secondary. \
+	@10.53.0.1 axfr > dig.out.ns1.test$n || tmp=1
+grep "^;" dig.out.ns1.test$n | cat_i
+
+$DIG $DIGOPTS secondary. \
+	@10.53.0.7 axfr > dig.out.ns7.test$n || tmp=1
+grep "^;" dig.out.ns7.test$n | cat_i
+
+digcomp dig.out.ns7.test$n dig.out.ns1.test$n || tmp=1
+
+# ns7 has a journal iff it generates an IXFR.
+test -f ns7/sec.bk || tmp=1
+test -f ns7/sec.bk.jnl || tmp=1
+
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "check that a multi-message uncompressable zone transfers ($n)"
+$DIG axfr . -p ${PORT} @10.53.0.4 | grep SOA > axfr.out
+if test `wc -l < axfr.out` != 2
+then
+	 echo_i "failed"
+         status=$((status+1))
+fi
+
+# now we test transfers with assorted TSIG glitches
+DIGCMD="$DIG $DIGOPTS @10.53.0.4"
+SENDCMD="$PERL ../send.pl 10.53.0.5 $EXTRAPORT1"
+
+echo_i "testing that incorrectly signed transfers will fail..."
+n=$((n+1))
+echo_i "initial correctly-signed transfer should succeed ($n)"
+
+$SENDCMD < ans5/goodaxfr
+
+# Initially, ns4 is not authoritative for anything.
+# Now that ans is up and running with the right data, we make ns4
+# a secondary for nil.
+
+cat <<EOF >>ns4/named.conf
+zone "nil" {
+	type secondary;
+	file "nil.db";
+	primaries { 10.53.0.5 key tsig_key; };
+};
+EOF
+
+nextpart ns4/named.run >/dev/null
+
+rndc_reload ns4 10.53.0.4
+
+wait_for_soa() (
+	$DIGCMD nil. SOA > dig.out.ns4.test$n
+	grep SOA dig.out.ns4.test$n > /dev/null
+)
+retry_quiet 10 wait_for_soa
+
+nextpart ns4/named.run | grep "Transfer status: success" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'initial AXFR' >/dev/null || {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "unsigned transfer ($n)"
+
+$SENDCMD < ans5/unsigned
+
+$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
+
+sleep 2
+
+nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'unsigned AXFR' >/dev/null && {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "bad keydata ($n)"
+
+$SENDCMD < ans5/badkeydata
+
+$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
+
+sleep 2
+
+nextpart ns4/named.run | grep "Transfer status: tsig verify failure" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'bad keydata AXFR' >/dev/null && {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "partially-signed transfer ($n)"
+
+$SENDCMD < ans5/partial
+
+$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
+
+sleep 2
+
+nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'partially signed AXFR' >/dev/null && {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "unknown key ($n)"
+
+$SENDCMD < ans5/unknownkey
+
+$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
+
+sleep 2
+
+nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'unknown key AXFR' >/dev/null && {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "incorrect key ($n)"
+
+$SENDCMD < ans5/wrongkey
+
+$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
+
+sleep 2
+
+nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'incorrect key AXFR' >/dev/null && {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "bad message id ($n)"
+
+$SENDCMD < ans5/badmessageid
+
+# Uncomment to see AXFR stream with mismatching IDs.
+# $DIG $DIGOPTS @10.53.0.5 -y tsig_key:LSAnCU+Z nil. AXFR +all
+
+$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
+
+sleep 2
+
+msg="detected message ID mismatch on incoming AXFR stream, transfer will fail in BIND 9.17.2 and later if AXFR source is not fixed"
+nextpart ns4/named.run | grep "$msg" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'bad message id' >/dev/null || {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "mismatched SOA ($n)"
+
+${SENDCMD} < ans5/soamismatch
+
+$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
+
+sleep 2
+
+nextpart ns4/named.run | grep "Transfer status: FORMERR" > /dev/null || {
+    echo_i "failed: expected status was not logged"
+    status=$((status+1))
+}
+
+$DIGCMD nil. TXT | grep 'SOA mismatch AXFR' >/dev/null && {
+    echo_i "failed"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "check that we ask for and get a EDNS EXPIRE response ($n)"
+# force a refresh query
+$RNDCCMD 10.53.0.7 refresh edns-expire 2>&1 | sed 's/^/ns7 /' | cat_i
+sleep 10
+
+# there may be multiple log entries so get the last one.
+expire=`awk '/edns-expire\/IN: got EDNS EXPIRE of/ { x=$9 } END { print x }' ns7/named.run`
+test ${expire:-0} -gt 0 -a ${expire:-0} -lt 1814400 || {
+    echo_i "failed (expire=${expire:-0})"
+    status=$((status+1))
+}
+
+n=$((n+1))
+echo_i "test smaller transfer TCP message size ($n)"
+$DIG $DIGOPTS example. @10.53.0.8 axfr \
+	-y key1.:1234abcd8765 > dig.out.msgsize.test$n || status=1
+
+$DOS2UNIX dig.out.msgsize.test$n >/dev/null 2>&1
+
+bytes=`wc -c < dig.out.msgsize.test$n`
+if [ $bytes -ne 459357 ]; then
+	echo_i "failed axfr size check"
+        status=$((status+1))
+fi
+
+num_messages=`cat ns8/named.run | grep "sending TCP message of" | wc -l`
+if [ $num_messages -le 300 ]; then
+	echo_i "failed transfer message count check"
+        status=$((status+1))
+fi
+
+n=$((n+1))
+echo_i "test mapped zone with out of zone data ($n)"
+tmp=0
+$DIG -p ${PORT} txt mapped @10.53.0.3 > dig.out.1.test$n
+grep "status: NOERROR," dig.out.1.test$n > /dev/null || tmp=1
+stop_server ns3
+start_server --noclean --restart --port ${PORT} ns3
+check_mapped () {
+	$DIG -p ${PORT} txt mapped @10.53.0.3 > dig.out.2.test$n
+	grep "status: NOERROR," dig.out.2.test$n > /dev/null || return 1
+	$DIG -p ${PORT} axfr mapped @10.53.0.3 > dig.out.3.test$n
+	digcomp knowngood.mapped dig.out.3.test$n || return 1
+	return 0
+}
+retry_quiet 10 check_mapped || tmp=1
+[ "$tmp" -ne 0 ] && echo_i "failed"
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "test that a zone with too many records is rejected (AXFR) ($n)"
+tmp=0
+grep "'axfr-too-big/IN'.*: too many records" ns6/named.run >/dev/null || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "test that a zone with too many records is rejected (IXFR) ($n)"
+tmp=0
+nextpart ns6/named.run > /dev/null
+$NSUPDATE << EOF
+zone ixfr-too-big
+server 10.53.0.1 ${PORT}
+update add the-31st-record.ixfr-too-big 0 TXT this is it
+send
+EOF
+msg="'ixfr-too-big/IN' from 10.53.0.1#${PORT}: Transfer status: too many records"
+wait_for_log 10 "$msg" ns6/named.run || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "checking whether dig calculates AXFR statistics correctly ($n)"
+tmp=0
+# Loop until the secondary server manages to transfer the "xfer-stats" zone so
+# that we can both check dig output and immediately proceed with the next test.
+# Use -b so that we can discern between incoming and outgoing transfers in ns3
+# logs later on.
+wait_for_xfer() (
+	$DIG $DIGOPTS +noedns +stat -b 10.53.0.2 @10.53.0.3 xfer-stats. AXFR > dig.out.ns3.test$n
+	grep "; Transfer failed" dig.out.ns3.test$n > /dev/null || return 0
+	return 1
+)
+if retry_quiet 10 wait_for_xfer; then
+	get_dig_xfer_stats dig.out.ns3.test$n > stats.dig
+	diff axfr-stats.good stats.dig || tmp=1
+else
+	echo_i "timed out waiting for zone transfer"
+fi
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+# Note: in the next two tests, we use ns3 logs for checking both incoming and
+# outgoing transfer statistics as ns3 is both a secondary server (for ns1) and a
+# primary server (for dig queries from the previous test) for "xfer-stats".
+n=$((n+1))
+echo_i "checking whether named calculates incoming AXFR statistics correctly ($n)"
+tmp=0
+get_named_xfer_stats ns3/named.run 10.53.0.1 xfer-stats "Transfer completed" > stats.incoming
+diff axfr-stats.good stats.incoming || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+n=$((n+1))
+echo_i "checking whether named calculates outgoing AXFR statistics correctly ($n)"
+tmp=0
+check_xfer_stats() {
+	get_named_xfer_stats ns3/named.run 10.53.0.2 xfer-stats "AXFR ended" > stats.outgoing
+	diff axfr-stats.good stats.outgoing > /dev/null
+}
+retry_quiet 10 check_xfer_stats || tmp=1
+if test $tmp != 0 ; then echo_i "failed"; fi
+status=$((status+tmp))
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1