diff options
Diffstat (limited to '')
| -rw-r--r-- | bin/rndc/rndc.rst | 608 |
1 files changed, 608 insertions, 0 deletions
diff --git a/bin/rndc/rndc.rst b/bin/rndc/rndc.rst new file mode 100644 index 0000000..b2ec0e8 --- /dev/null +++ b/bin/rndc/rndc.rst @@ -0,0 +1,608 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. highlight: console + +.. _man_rndc: + +rndc - name server control utility +---------------------------------- + +Synopsis +~~~~~~~~ + +:program:`rndc` [**-b** source-address] [**-c** config-file] [**-k** key-file] [**-s** server] [**-p** port] [**-q**] [**-r**] [**-V**] [**-y** key_id] [[**-4**] | [**-6**]] {command} + +Description +~~~~~~~~~~~ + +``rndc`` controls the operation of a name server; it supersedes the +``ndc`` utility. If ``rndc`` is +invoked with no command line options or arguments, it prints a short +summary of the supported commands and the available options and their +arguments. + +``rndc`` communicates with the name server over a TCP connection, +sending commands authenticated with digital signatures. In the current +versions of ``rndc`` and ``named``, the only supported authentication +algorithms are HMAC-MD5 (for compatibility), HMAC-SHA1, HMAC-SHA224, +HMAC-SHA256 (default), HMAC-SHA384, and HMAC-SHA512. They use a shared +secret on each end of the connection, which provides TSIG-style +authentication for the command request and the name server's response. +All commands sent over the channel must be signed by a key_id known to +the server. + +``rndc`` reads a configuration file to determine how to contact the name +server and decide what algorithm and key it should use. + +Options +~~~~~~~ + +``-4`` + This option indicates use of IPv4 only. + +``-6`` + This option indicates use of IPv6 only. + +``-b source-address`` + This option indicates ``source-address`` as the source address for the connection to the + server. Multiple instances are permitted, to allow setting of both the + IPv4 and IPv6 source addresses. + +``-c config-file`` + This option indicates ``config-file`` as the configuration file instead of the default, + ``/etc/rndc.conf``. + +``-k key-file`` + This option indicates ``key-file`` as the key file instead of the default, + ``/etc/rndc.key``. The key in ``/etc/rndc.key`` is used to + authenticate commands sent to the server if the config-file does not + exist. + +``-s server`` + ``server`` is the name or address of the server which matches a server + statement in the configuration file for ``rndc``. If no server is + supplied on the command line, the host named by the default-server + clause in the options statement of the ``rndc`` configuration file + is used. + +``-p port`` + This option instructs BIND 9 to send commands to TCP port ``port`` instead of its default control + channel port, 953. + +``-q`` + This option sets quiet mode, where message text returned by the server is not printed + unless there is an error. + +``-r`` + This option instructs ``rndc`` to print the result code returned by ``named`` + after executing the requested command (e.g., ISC_R_SUCCESS, + ISC_R_FAILURE, etc.). + +``-V`` + This option enables verbose logging. + +``-y key_id`` + This option indicates use of the key ``key_id`` from the configuration file. For control message validation to succeed, ``key_id`` must be known + by ``named`` with the same algorithm and secret string. If no ``key_id`` is specified, + ``rndc`` first looks for a key clause in the server statement of + the server being used, or if no server statement is present for that + host, then in the default-key clause of the options statement. Note that + the configuration file contains shared secrets which are used to send + authenticated control commands to name servers, and should therefore + not have general read or write access. + +Commands +~~~~~~~~ + +A list of commands supported by ``rndc`` can be seen by running ``rndc`` +without arguments. + +Currently supported commands are: + +``addzone`` *zone* [*class* [*view*]] *configuration* + This command adds a zone while the server is running. This command requires the + ``allow-new-zones`` option to be set to ``yes``. The configuration + string specified on the command line is the zone configuration text + that would ordinarily be placed in ``named.conf``. + + The configuration is saved in a file called ``viewname.nzf`` (or, if + ``named`` is compiled with liblmdb, an LMDB database file called + ``viewname.nzd``). ``viewname`` is the name of the view, unless the view + name contains characters that are incompatible with use as a file + name, in which case a cryptographic hash of the view name is used + instead. When ``named`` is restarted, the file is loaded into + the view configuration so that zones that were added can persist + after a restart. + + This sample ``addzone`` command adds the zone ``example.com`` to + the default view: + + ``rndc addzone example.com '{ type master; file "example.com.db"; };'`` + + (Note the brackets around and semi-colon after the zone configuration + text.) + + See also ``rndc delzone`` and ``rndc modzone``. + +``delzone`` [**-clean**] *zone* [*class* [*view*]] + This command deletes a zone while the server is running. + + If the ``-clean`` argument is specified, the zone's master file (and + journal file, if any) are deleted along with the zone. Without + the ``-clean`` option, zone files must be deleted manually. (If the + zone is of type ``secondary`` or ``stub``, the files needing to be removed + are reported in the output of the ``rndc delzone`` command.) + + If the zone was originally added via ``rndc addzone``, then it is + removed permanently. However, if it was originally configured in + ``named.conf``, then that original configuration remains in place; + when the server is restarted or reconfigured, the zone is + recreated. To remove it permanently, it must also be removed from + ``named.conf``. + + See also ``rndc addzone`` and ``rndc modzone``. + +``dnssec`` ( **-status** | **-rollover** **-key** id [**-alg** *algorithm*] [**-when** *time*] | **-checkds** [**-key** *id* [**-alg** *algorithm*]] [**-when** *time*] ( *published* | *withdrawn* )) *zone* [*class* [*view*]] + This command allows you to interact with the "dnssec-policy" of a given + zone. + + ``rndc dnssec -status`` show the DNSSEC signing state for the specified + zone. + + ``rndc dnssec -rollover`` allows you to schedule key rollover for a + specific key (overriding the original key lifetime). + + ``rndc dnssec -checkds`` informs :iscman:`named` that the DS for + a specified zone's key-signing key has been confirmed to be published + in, or withdrawn from, the parent zone. This is required in order to + complete a KSK rollover. The ``-key id`` and ``-alg algorithm`` arguments + can be used to specify a particular KSK, if necessary; if there is only + one key acting as a KSK for the zone, these arguments can be omitted. + The time of publication or withdrawal for the DS is set to the current + time by default, but can be overridden to a specific time with the + argument ``-when time``, where ``time`` is expressed in YYYYMMDDHHMMSS + notation. + +``dnstap`` ( **-reopen** | **-roll** [*number*] ) + This command closes and re-opens DNSTAP output files. + + ``rndc dnstap -reopen`` allows + the output file to be renamed externally, so that ``named`` can + truncate and re-open it. + + ``rndc dnstap -roll`` causes the output file + to be rolled automatically, similar to log files. The most recent + output file has ".0" appended to its name; the previous most recent + output file is moved to ".1", and so on. If ``number`` is specified, then + the number of backup log files is limited to that number. + +``dumpdb`` [**-all** | **-cache** | **-zones** | **-adb** | **-bad** | **-expired** | **-fail**] [*view ...*] + This command dumps the server's caches (default) and/or zones to the dump file for + the specified views. If no view is specified, all views are dumped. + (See the ``dump-file`` option in the BIND 9 Administrator Reference + Manual.) + +``flush`` + This command flushes the server's cache. + +``flushname`` *name* [*view*] + This command flushes the given name from the view's DNS cache and, if applicable, + from the view's nameserver address database, bad server cache, and + SERVFAIL cache. + +``flushtree`` *name* [*view*] + This command flushes the given name, and all of its subdomains, from the view's + DNS cache, address database, bad server cache, and SERVFAIL cache. + +``freeze`` [*zone* [*class* [*view*]]] + This command suspends updates to a dynamic zone. If no zone is specified, then all + zones are suspended. This allows manual edits to be made to a zone + normally updated by dynamic update, and causes changes in the + journal file to be synced into the master file. All dynamic update + attempts are refused while the zone is frozen. + + See also ``rndc thaw``. + +``halt`` [**-p**] + This command stops the server immediately. Recent changes made through dynamic + update or IXFR are not saved to the master files, but are rolled + forward from the journal files when the server is restarted. If + ``-p`` is specified, ``named``'s process ID is returned. This allows + an external process to determine when ``named`` has completed + halting. + + See also ``rndc stop``. + +``loadkeys`` [*zone* [*class* [*view*]]] + This command fetches all DNSSEC keys for the given zone from the key directory. If + they are within their publication period, they are merged into the + zone's DNSKEY RRset. Unlike ``rndc sign``, however, the zone is not + immediately re-signed by the new keys, but is allowed to + incrementally re-sign over time. + + This command requires that the zone be configured with a ``dnssec-policy``, or + that the ``auto-dnssec`` zone option be set to ``maintain``, and also requires the + zone to be configured to allow dynamic DNS. (See "Dynamic Update Policies" in + the Administrator Reference Manual for more details.) + +``managed-keys`` (*status* | *refresh* | *sync* | *destroy*) [*class* [*view*]] + This command inspects and controls the "managed-keys" database which handles + :rfc:`5011` DNSSEC trust anchor maintenance. If a view is specified, these + commands are applied to that view; otherwise, they are applied to all + views. + + - When run with the ``status`` keyword, this prints the current status of + the managed-keys database. + + - When run with the ``refresh`` keyword, this forces an immediate refresh + query to be sent for all the managed keys, updating the + managed-keys database if any new keys are found, without waiting + the normal refresh interval. + + - When run with the ``sync`` keyword, this forces an immediate dump of + the managed-keys database to disk (in the file + ``managed-keys.bind`` or (``viewname.mkeys``). This synchronizes + the database with its journal file, so that the database's current + contents can be inspected visually. + + - When run with the ``destroy`` keyword, the managed-keys database + is shut down and deleted, and all key maintenance is terminated. + This command should be used only with extreme caution. + + Existing keys that are already trusted are not deleted from + memory; DNSSEC validation can continue after this command is used. + However, key maintenance operations cease until ``named`` is + restarted or reconfigured, and all existing key maintenance states + are deleted. + + Running ``rndc reconfig`` or restarting ``named`` immediately + after this command causes key maintenance to be reinitialized + from scratch, just as if the server were being started for the + first time. This is primarily intended for testing, but it may + also be used, for example, to jumpstart the acquisition of new + keys in the event of a trust anchor rollover, or as a brute-force + repair for key maintenance problems. + +``modzone`` *zone* [*class* [*view*]] *configuration* + This command modifies the configuration of a zone while the server is running. This + command requires the ``allow-new-zones`` option to be set to ``yes``. + As with ``addzone``, the configuration string specified on the + command line is the zone configuration text that would ordinarily be + placed in ``named.conf``. + + If the zone was originally added via ``rndc addzone``, the + configuration changes are recorded permanently and are still + in effect after the server is restarted or reconfigured. However, if + it was originally configured in ``named.conf``, then that original + configuration remains in place; when the server is restarted or + reconfigured, the zone reverts to its original configuration. To + make the changes permanent, it must also be modified in + ``named.conf``. + + See also ``rndc addzone`` and ``rndc delzone``. + +``notify`` *zone* [*class* [*view*]] + This command resends NOTIFY messages for the zone. + +``notrace`` + This command sets the server's debugging level to 0. + + See also ``rndc trace``. + +``nta`` [( **-class** *class* | **-dump** | **-force** | **-remove** | **-lifetime** *duration*)] *domain* [*view*] + This command sets a DNSSEC negative trust anchor (NTA) for ``domain``, with a + lifetime of ``duration``. The default lifetime is configured in + ``named.conf`` via the ``nta-lifetime`` option, and defaults to one + hour. The lifetime cannot exceed one week. + + A negative trust anchor selectively disables DNSSEC validation for + zones that are known to be failing because of misconfiguration rather + than an attack. When data to be validated is at or below an active + NTA (and above any other configured trust anchors), ``named`` + aborts the DNSSEC validation process and treats the data as insecure + rather than bogus. This continues until the NTA's lifetime has + elapsed. + + NTAs persist across restarts of the ``named`` server. The NTAs for a + view are saved in a file called ``name.nta``, where ``name`` is the name + of the view; if it contains characters that are incompatible with + use as a file name, a cryptographic hash is generated from the name of + the view. + + An existing NTA can be removed by using the ``-remove`` option. + + An NTA's lifetime can be specified with the ``-lifetime`` option. + TTL-style suffixes can be used to specify the lifetime in seconds, + minutes, or hours. If the specified NTA already exists, its lifetime + is updated to the new value. Setting ``lifetime`` to zero is + equivalent to ``-remove``. + + If ``-dump`` is used, any other arguments are ignored and a list + of existing NTAs is printed. Note that this may include NTAs that are + expired but have not yet been cleaned up. + + Normally, ``named`` periodically tests to see whether data below + an NTA can now be validated (see the ``nta-recheck`` option in the + Administrator Reference Manual for details). If data can be + validated, then the NTA is regarded as no longer necessary and is + allowed to expire early. The ``-force`` parameter overrides this behavior + and forces an NTA to persist for its entire lifetime, regardless of + whether data could be validated if the NTA were not present. + + The view class can be specified with ``-class``. The default is class + ``IN``, which is the only class for which DNSSEC is currently + supported. + + All of these options can be shortened, i.e., to ``-l``, ``-r``, + ``-d``, ``-f``, and ``-c``. + + Unrecognized options are treated as errors. To refer to a domain or + view name that begins with a hyphen, use a double-hyphen (--) on the + command line to indicate the end of options. + +``querylog`` [(*on* | *off*)] + This command enables or disables query logging. For backward compatibility, this + command can also be used without an argument to toggle query logging + on and off. + + Query logging can also be enabled by explicitly directing the + ``queries`` ``category`` to a ``channel`` in the ``logging`` section + of ``named.conf``, or by specifying ``querylog yes;`` in the + ``options`` section of ``named.conf``. + +``reconfig`` + This command reloads the configuration file and loads new zones, but does not reload + existing zone files even if they have changed. This is faster than a + full ``reload`` when there is a large number of zones, because it + avoids the need to examine the modification times of the zone files. + +``recursing`` + This command dumps the list of queries ``named`` is currently + recursing on, and the list of domains to which iterative queries + are currently being sent. + + The first list includes all unique clients that are waiting for + recursion to complete, including the query that is awaiting a + response and the timestamp (seconds since the Unix epoch) of + when named started processing this client query. + + The second list comprises of domains for which there are active + (or recently active) fetches in progress. It reports the number + of active fetches for each domain and the number of queries that + have been passed (allowed) or dropped (spilled) as a result of + the ``fetches-per-zone`` limit. (Note: these counters are not + cumulative over time; whenever the number of active fetches for + a domain drops to zero, the counter for that domain is deleted, + and the next time a fetch is sent to that domain, it is recreated + with the counters set to zero). + +``refresh`` *zone* [*class* [*view*]] + This command schedules zone maintenance for the given zone. + +``reload`` + This command reloads the configuration file and zones. + +``reload`` *zone* [*class* [*view*]] + This command reloads the given zone. + +``retransfer`` *zone* [*class* [*view*]] + This command retransfers the given secondary zone from the primary server. + + If the zone is configured to use ``inline-signing``, the signed + version of the zone is discarded; after the retransfer of the + unsigned version is complete, the signed version is regenerated + with new signatures. + +``scan`` + This command scans the list of available network interfaces for changes, without + performing a full ``reconfig`` or waiting for the + ``interface-interval`` timer. + +``secroots`` [**-**] [*view* ...] + This command dumps the security roots (i.e., trust anchors configured via + ``trust-anchors``, or the ``managed-keys`` or ``trusted-keys`` statements + [both deprecated], or ``dnssec-validation auto``) and negative trust anchors + for the specified views. If no view is specified, all views are + dumped. Security roots indicate whether they are configured as trusted + keys, managed keys, or initializing managed keys (managed keys that have not + yet been updated by a successful key refresh query). + + If the first argument is ``-``, then the output is returned via the + ``rndc`` response channel and printed to the standard output. + Otherwise, it is written to the secroots dump file, which defaults to + ``named.secroots``, but can be overridden via the ``secroots-file`` + option in ``named.conf``. + + See also ``rndc managed-keys``. + +``serve-stale`` (**on** | **off** | **reset** | **status**) [*class* [*view*]] + This command enables, disables, resets, or reports the current status of the serving + of stale answers as configured in ``named.conf``. + + If serving of stale answers is disabled by ``rndc-serve-stale off``, + then it remains disabled even if ``named`` is reloaded or + reconfigured. ``rndc serve-stale reset`` restores the setting as + configured in ``named.conf``. + + ``rndc serve-stale status`` reports whether serving of stale + answers is currently enabled, disabled by the configuration, or + disabled by ``rndc``. It also reports the values of + ``stale-answer-ttl`` and ``max-stale-ttl``. + +``showzone`` *zone* [*class* [*view*]] + This command prints the configuration of a running zone. + + See also ``rndc zonestatus``. + +``sign`` *zone* [*class* [*view*]] + This command fetches all DNSSEC keys for the given zone from the key directory (see + the ``key-directory`` option in the BIND 9 Administrator Reference + Manual). If they are within their publication period, they are merged into + the zone's DNSKEY RRset. If the DNSKEY RRset is changed, then the + zone is automatically re-signed with the new key set. + + This command requires that the zone be configured with a ``dnssec-policy``, or + that the ``auto-dnssec`` zone option be set to ``allow`` or ``maintain``, + and also requires the zone to be configured to allow dynamic DNS. (See + "Dynamic Update Policies" in the BIND 9 Administrator Reference Manual for more + details.) + + See also ``rndc loadkeys``. + +``signing`` [(**-list** | **-clear** *keyid/algorithm* | **-clear** *all* | **-nsec3param** ( *parameters* | none ) | **-serial** *value* ) *zone* [*class* [*view*]] + This command lists, edits, or removes the DNSSEC signing-state records for the + specified zone. The status of ongoing DNSSEC operations, such as + signing or generating NSEC3 chains, is stored in the zone in the form + of DNS resource records of type ``sig-signing-type``. + ``rndc signing -list`` converts these records into a human-readable + form, indicating which keys are currently signing or have finished + signing the zone, and which NSEC3 chains are being created or + removed. + + ``rndc signing -clear`` can remove a single key (specified in the + same format that ``rndc signing -list`` uses to display it), or all + keys. In either case, only completed keys are removed; any record + indicating that a key has not yet finished signing the zone is + retained. + + ``rndc signing -nsec3param`` sets the NSEC3 parameters for a zone. + This is the only supported mechanism for using NSEC3 with + ``inline-signing`` zones. Parameters are specified in the same format + as an NSEC3PARAM resource record: ``hash algorithm``, ``flags``, ``iterations``, + and ``salt``, in that order. + + Currently, the only defined value for ``hash algorithm`` is ``1``, + representing SHA-1. The ``flags`` may be set to ``0`` or ``1``, + depending on whether the opt-out bit in the NSEC3 + chain should be set. ``iterations`` defines the number of additional times to apply + the algorithm when generating an NSEC3 hash. The ``salt`` is a string + of data expressed in hexadecimal, a hyphen (``-``) if no salt is to be + used, or the keyword ``auto``, which causes ``named`` to generate a + random 64-bit salt. + + The only recommended configuration is ``rndc signing -nsec3param 1 0 0 - zone``, + i.e. no salt, no additional iterations, no opt-out. + + .. warning:: + Do not use extra iterations, salt, or opt-out unless all their implications + are fully understood. A higher number of iterations causes interoperability + problems and opens servers to CPU-exhausting DoS attacks. + + ``rndc signing -nsec3param none`` removes an existing NSEC3 chain and + replaces it with NSEC. + + ``rndc signing -serial value`` sets the serial number of the zone to + ``value``. If the value would cause the serial number to go backwards, it + is rejected. The primary use of this parameter is to set the serial number on inline + signed zones. + +``stats`` + This command writes server statistics to the statistics file. (See the + ``statistics-file`` option in the BIND 9 Administrator Reference + Manual.) + +``status`` + This command displays the status of the server. Note that the number of zones includes + the internal ``bind/CH`` zone and the default ``./IN`` hint zone, if + there is no explicit root zone configured. + +``stop`` **-p** + This command stops the server, making sure any recent changes made through dynamic + update or IXFR are first saved to the master files of the updated + zones. If ``-p`` is specified, ``named(8)`'s process ID is returned. + This allows an external process to determine when ``named`` has + completed stopping. + + See also ``rndc halt``. + +``sync`` **-clean** [*zone* [*class* [*view*]]] + This command syncs changes in the journal file for a dynamic zone to the master + file. If the "-clean" option is specified, the journal file is also + removed. If no zone is specified, then all zones are synced. + +``tcp-timeouts`` [*initial* *idle* *keepalive* *advertised*] + When called without arguments, this command displays the current values of the + ``tcp-initial-timeout``, ``tcp-idle-timeout``, + ``tcp-keepalive-timeout``, and ``tcp-advertised-timeout`` options. + When called with arguments, these values are updated. This allows an + administrator to make rapid adjustments when under a + denial-of-service (DoS) attack. See the descriptions of these options in the BIND 9 + Administrator Reference Manual for details of their use. + +``thaw`` [*zone* [*class* [*view*]]] + This command enables updates to a frozen dynamic zone. If no zone is specified, + then all frozen zones are enabled. This causes the server to reload + the zone from disk, and re-enables dynamic updates after the load has + completed. After a zone is thawed, dynamic updates are no longer + refused. If the zone has changed and the ``ixfr-from-differences`` + option is in use, the journal file is updated to reflect + changes in the zone. Otherwise, if the zone has changed, any existing + journal file is removed. + + See also ``rndc freeze``. + +``trace`` + This command increments the server's debugging level by one. + +``trace`` *level* + This command sets the server's debugging level to an explicit value. + + See also ``rndc notrace``. + +``tsig-delete`` *keyname* [*view*] + This command deletes a given TKEY-negotiated key from the server. This does not + apply to statically configured TSIG keys. + +``tsig-list`` + This command lists the names of all TSIG keys currently configured for use by + ``named`` in each view. The list includes both statically configured keys and + dynamic TKEY-negotiated keys. + +``validation`` (**on** | **off** | **status**) [*view* ...]`` + This command enables, disables, or checks the current status of DNSSEC validation. By + default, validation is enabled. + + The cache is flushed when validation is turned on or off to avoid using data + that might differ between states. + +``zonestatus`` *zone* [*class* [*view*]] + This command displays the current status of the given zone, including the master + file name and any include files from which it was loaded, when it was + most recently loaded, the current serial number, the number of nodes, + whether the zone supports dynamic updates, whether the zone is DNSSEC + signed, whether it uses automatic DNSSEC key management or inline + signing, and the scheduled refresh or expiry times for the zone. + + See also ``rndc showzone``. + +``rndc`` commands that specify zone names, such as ``reload``, +``retransfer``, or ``zonestatus``, can be ambiguous when applied to zones +of type ``redirect``. Redirect zones are always called ``.``, and can be +confused with zones of type ``hint`` or with secondary copies of the root +zone. To specify a redirect zone, use the special zone name +``-redirect``, without a trailing period. (With a trailing period, this +would specify a zone called "-redirect".) + +Limitations +~~~~~~~~~~~ + +There is currently no way to provide the shared secret for a ``key_id`` +without using the configuration file. + +Several error messages could be clearer. + +See Also +~~~~~~~~ + +:manpage:`rndc.conf(5)`, :manpage:`rndc-confgen(8)`, +:manpage:`named(8)`, :manpage:`named.conf(5)`, :manpage:`ndc(8)`, BIND 9 Administrator +Reference Manual. |