diff options
Diffstat (limited to 'bin/tests/system/ixfr/tests.sh')
| -rw-r--r-- | bin/tests/system/ixfr/tests.sh | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/bin/tests/system/ixfr/tests.sh b/bin/tests/system/ixfr/tests.sh new file mode 100644 index 0000000..1d37b45 --- /dev/null +++ b/bin/tests/system/ixfr/tests.sh @@ -0,0 +1,412 @@ +#!/bin/sh + +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +# WARNING: The test labelled "testing request-ixfr option in view vs zone" +# is fragile because it depends upon counting instances of records +# in the log file - need a better approach <sdm> - until then, +# if you add any tests above that point, you will break the test. + +SYSTEMTESTTOP=.. +. $SYSTEMTESTTOP/conf.sh + +wait_for_serial() ( + $DIG $DIGOPTS "@$1" "$2" SOA > "$4" + serial=$(awk '$4 == "SOA" { print $7 }' "$4") + [ "$3" -eq "${serial:--1}" ] +) + +status=0 +n=0 + +DIGOPTS="+tcp +noadd +nosea +nostat +noquest +nocomm +nocmd -p ${PORT}" +SENDCMD="$PERL ../send.pl 10.53.0.2 ${EXTRAPORT1}" +RNDCCMD="$RNDC -p ${CONTROLPORT} -c ../common/rndc.conf -s" + +n=$((n+1)) +echo_i "testing initial AXFR ($n)" +ret=0 + +$SENDCMD <<EOF +/SOA/ +nil. 300 SOA ns.nil. root.nil. 1 300 300 604800 300 +/AXFR/ +nil. 300 SOA ns.nil. root.nil. 1 300 300 604800 300 +/AXFR/ +nil. 300 NS ns.nil. +nil. 300 TXT "initial AXFR" +a.nil. 60 A 10.0.0.61 +b.nil. 60 A 10.0.0.62 +/AXFR/ +nil. 300 SOA ns.nil. root.nil. 1 300 300 604800 300 +EOF + +sleep 1 + +# Initially, ns1 is not authoritative for anything (see setup.sh). +# Now that ans is up and running with the right data, we make it +# a secondary for nil. + +cat <<EOF >>ns1/named.conf +zone "nil" { + type secondary; + file "myftp.db"; + primaries { 10.53.0.2; }; +}; +EOF + +rndc_reload ns1 10.53.0.1 + +retry_quiet 10 wait_for_serial 10.53.0.1 nil. 1 dig.out.test$n || ret=1 + +$DIG $DIGOPTS @10.53.0.1 nil. TXT | grep 'initial AXFR' >/dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "testing successful IXFR ($n)" +ret=0 + +# We change the IP address of a.nil., and the TXT record at the apex. +# Then we do a SOA-only update. + +$SENDCMD <<EOF +/SOA/ +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +/IXFR/ +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +nil. 300 SOA ns.nil. root.nil. 1 300 300 604800 300 +a.nil. 60 A 10.0.0.61 +nil. 300 TXT "initial AXFR" +nil. 300 SOA ns.nil. root.nil. 2 300 300 604800 300 +nil. 300 TXT "successful IXFR" +a.nil. 60 A 10.0.1.61 +nil. 300 SOA ns.nil. root.nil. 2 300 300 604800 300 +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +EOF + +sleep 1 + +$RNDCCMD 10.53.0.1 refresh nil | sed 's/^/ns1 /' | cat_i + +sleep 2 + +$DIG $DIGOPTS @10.53.0.1 nil. TXT | grep 'successful IXFR' >/dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "testing AXFR fallback after IXFR failure (not exact error) ($n)" +ret=0 + +# Provide a broken IXFR response and a working fallback AXFR response + +$SENDCMD <<EOF +/SOA/ +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +/IXFR/ +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +nil. 300 TXT "delete-nonexistent-txt-record" +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +nil. 300 TXT "this-txt-record-would-be-added" +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +/AXFR/ +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +/AXFR/ +nil. 300 NS ns.nil. +nil. 300 TXT "fallback AXFR" +/AXFR/ +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +EOF + +sleep 1 + +$RNDCCMD 10.53.0.1 refresh nil | sed 's/^/ns1 /' | cat_i + +sleep 2 + +$DIG $DIGOPTS @10.53.0.1 nil. TXT | grep 'fallback AXFR' >/dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "testing AXFR fallback after IXFR failure (bad SOA owner) ($n)" +ret=0 + +# Prepare for checking the logs later on. +nextpart ns1/named.run >/dev/null + +# Provide a broken IXFR response and a working fallback AXFR response. +$SENDCMD <<EOF +/SOA/ +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +/IXFR/ +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +nil. 300 SOA ns.nil. root.nil. 3 300 300 604800 300 +bad-owner. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +test.nil. 300 TXT "serial 4, malformed IXFR" +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +/AXFR/ +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +/AXFR/ +nil. 300 NS ns.nil. +test.nil. 300 TXT "serial 4, fallback AXFR" +/AXFR/ +nil. 300 SOA ns.nil. root.nil. 4 300 300 604800 300 +EOF +$RNDCCMD 10.53.0.1 refresh nil | sed 's/^/ns1 /' | cat_i + +# A broken server would accept the malformed IXFR and apply its contents to the +# zone. A fixed one would reject the IXFR and fall back to AXFR. Both IXFR and +# AXFR above bring the nil. zone up to serial 4, but we cannot reliably query +# for the SOA record to check whether the transfer was finished because a broken +# server would send back SERVFAIL responses to SOA queries after accepting the +# malformed IXFR. Instead, check transfer progress by querying for a TXT record +# at test.nil. which is present in both IXFR and AXFR (with different contents). +_wait_until_transfer_is_finished() { + $DIG $DIGOPTS +tries=1 +time=1 @10.53.0.1 test.nil. TXT > dig.out.test$n.1 && + grep -q -F "serial 4" dig.out.test$n.1 +} +if ! retry_quiet 10 _wait_until_transfer_is_finished; then + echo_i "timed out waiting for version 4 of zone nil. to be transferred" + ret=1 +fi + +# At this point a broken server would be serving a zone with no SOA records. +# Try crashing it by triggering a SOA refresh query. +$RNDCCMD 10.53.0.1 refresh nil | sed 's/^/ns1 /' | cat_i + +# Do not wait until the zone refresh completes - even if a crash has not +# happened by now, a broken server would never serve the record which is only +# present in the fallback AXFR, so checking for that is enough to verify if a +# server is broken or not; if it is, it is bound to crash shortly anyway. +$DIG $DIGOPTS test.nil. TXT @10.53.0.1 > dig.out.test$n.2 || ret=1 +grep -q -F "serial 4, fallback AXFR" dig.out.test$n.2 || ret=1 + +# Ensure the expected error is logged. +nextpart ns1/named.run | grep -q -F "SOA name mismatch" || ret=1 + +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "testing ixfr-from-differences option ($n)" +# ns3 is primary; ns4 is secondary +$CHECKZONE test. ns3/mytest.db > /dev/null 2>&1 +if [ $? -ne 0 ] +then + echo_i "named-checkzone returned failure on ns3/mytest.db" +fi + +retry_quiet 10 wait_for_serial 10.53.0.4 test. 1 dig.out.test$n || ret=1 + +nextpart ns4/named.run > /dev/null + +# modify the primary +sleep 1 +cp ns3/mytest1.db ns3/mytest.db +$RNDCCMD 10.53.0.3 reload | sed 's/^/ns3 /' | cat_i + +# wait for primary to reload +retry_quiet 10 wait_for_serial 10.53.0.3 test. 2 dig.out.test$n || ret=1 + +# wait for secondary to reload +tret=0 +retry_quiet 5 wait_for_serial 10.53.0.4 test. 2 dig.out.test$n || tret=1 +if [ $tret -eq 1 ]; then + # re-noitfy after 5 seconds, then wait another 10 + $RNDCCMD 10.53.0.3 notify test | set 's/^/ns3 /' | cat_i + retry_quiet 10 wait_for_serial 10.53.0.4 test. 2 dig.out.test$n || ret=1 +fi + +wait_for_log 10 'got incremental' ns4/named.run || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "testing 'request-ixfr no' option inheritance from view ($n)" +ret=0 +# There's a view with 2 zones. In the view, "request-ixfr yes" +# but in the zone "sub.test", request-ixfr no" +# we want to make sure that a change to sub.test results in AXFR, while +# changes to test. result in IXFR + +sleep 1 +cp ns3/subtest1.db ns3/subtest.db # change to sub.test zone, should be AXFR +nextpart ns4/named.run > /dev/null +$RNDCCMD 10.53.0.3 reload | sed 's/^/ns3 /' | cat_i + +# wait for primary to reload +retry_quiet 10 wait_for_serial 10.53.0.3 sub.test. 3 dig.out.test$n || ret=1 + +# wait for secondary to reload +tret=0 +retry_quiet 5 wait_for_serial 10.53.0.4 sub.test. 3 dig.out.test$n || tret=1 +if [ $tret -eq 1 ]; then + # re-noitfy after 5 seconds, then wait another 10 + $RNDCCMD 10.53.0.3 notify sub.test | set 's/^/ns3 /' | cat_i + retry_quiet 10 wait_for_serial 10.53.0.4 sub.test. 3 dig.out.test$n || ret=1 +fi + +wait_for_log 10 'got nonincremental response' ns4/named.run || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "testing 'request-ixfr yes' option inheritance from view ($n)" +ret=0 +sleep 1 +cp ns3/mytest2.db ns3/mytest.db # change to test zone, should be IXFR +nextpart ns4/named.run > /dev/null +$RNDCCMD 10.53.0.3 reload | sed 's/^/ns3 /' | cat_i + +# wait for primary to reload +retry_quiet 10 wait_for_serial 10.53.0.3 test. 3 dig.out.test$n || ret=1 + +# wait for secondary to reload +tret=0 +retry_quiet 5 wait_for_serial 10.53.0.4 test. 3 dig.out.test$n || tret=1 +if [ $tret -eq 1 ]; then + # re-noitfy after 5 seconds, then wait another 10 + $RNDCCMD 10.53.0.3 notify test | set 's/^/ns3 /' | cat_i + retry_quiet 10 wait_for_serial 10.53.0.4 test. 3 dig.out.test$n || ret=1 +fi + +wait_for_log 10 'got incremental response' ns4/named.run || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "testing DiG's handling of a multi message AXFR style IXFR response ($n)" +( +(sleep 10 && kill $$) 2>/dev/null & +sub=$! +$DIG -p ${PORT} ixfr=0 large @10.53.0.3 > dig.out.test$n +kill $sub +) +lines=`grep hostmaster.large dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +messages=`sed -n 's/^;;.*messages \([0-9]*\),.*/\1/p' dig.out.test$n` +test ${messages:-0} -gt 1 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "test 'dig +notcp ixfr=<value>' vs 'dig ixfr=<value> +notcp' vs 'dig ixfr=<value>' ($n)" +ret=0 +# Should be "switch to TCP" response +$DIG $DIGOPTS +notcp ixfr=1 test @10.53.0.4 > dig.out1.test$n || ret=1 +$DIG $DIGOPTS ixfr=1 +notcp test @10.53.0.4 > dig.out2.test$n || ret=1 +digcomp dig.out1.test$n dig.out2.test$n || ret=1 +awk '$4 == "SOA" { soacnt++} END {if (soacnt == 1) exit(0); else exit(1);}' dig.out1.test$n || ret=1 +awk '$4 == "SOA" { if ($7 == 3) exit(0); else exit(1);}' dig.out1.test$n || ret=1 +# +nextpart ns4/named.run > /dev/null +# Should be incremental transfer. +$DIG $DIGOPTS ixfr=1 test @10.53.0.4 > dig.out3.test$n || ret=1 +awk '$4 == "SOA" { soacnt++} END { if (soacnt == 6) exit(0); else exit(1);}' dig.out3.test$n || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "check estimated IXFR size ($n)" +ret=0 +# note IXFR delta size will be slightly bigger with version 1 transaction +# headers as there is no correction for the overall record length storage. +# Ver1 = 4 * (6 + 10 + 10 + 17 + 5 * 4) + 2 * (13 + 10 + 4) + (6 * 4) = 330 +# Ver2 = 4 * (6 + 10 + 10 + 17 + 5 * 4) + 2 * (13 + 10 + 4) = 306 +nextpart ns4/named.run | grep "IXFR delta size (306 bytes)" > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# make sure ns5 has transfered the zone +# wait for secondary to reload +tret=0 +retry_quiet 5 wait_for_serial 10.53.0.5 test. 4 dig.out.test$n || tret=1 +if [ $tret -eq 1 ]; then + # re-noitfy after 5 seconds, then wait another 10 + $RNDCCMD 10.53.0.3 notify test | set 's/^/ns3 /' | cat_i + retry_quiet 10 wait_for_serial 10.53.0.5 test. 3 dig.out.test$n || ret=1 +fi + +n=$((n+1)) +echo_i "test 'provide-ixfr no;' (serial < current) ($n)" +ret=0 +nextpart ns5/named.run > /dev/null +# Should be "AXFR style" response +$DIG $DIGOPTS ixfr=1 test @10.53.0.5 > dig.out1.test$n || ret=1 +# Should be "switch to TCP" response +$DIG $DIGOPTS ixfr=1 +notcp test @10.53.0.5 > dig.out2.test$n || ret=1 +awk '$4 == "SOA" { soacnt++} END {if (soacnt == 2) exit(0); else exit(1);}' dig.out1.test$n || ret=1 +awk '$4 == "SOA" { soacnt++} END {if (soacnt == 1) exit(0); else exit(1);}' dig.out2.test$n || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "checking whether dig calculates IXFR statistics correctly ($n)" +ret=0 +$DIG $DIGOPTS +noedns +stat -b 10.53.0.4 @10.53.0.4 test. ixfr=2 > dig.out1.test$n +get_dig_xfer_stats dig.out1.test$n > stats.dig +diff ixfr-stats.good stats.dig > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +# Note: in the next two tests, we use ns4 logs for checking both incoming and +# outgoing transfer statistics as ns4 is both a secondary server (for ns3) and a +# primary server (for dig queries from the previous test) for "test". + +_wait_for_stats () { + get_named_xfer_stats ns4/named.run "$1" test "$2" > "$3" + diff ixfr-stats.good "$3" > /dev/null || return 1 + return 0 +} + +n=$((n+1)) +echo_i "checking whether named calculates incoming IXFR statistics correctly ($n)" +ret=0 +retry_quiet 10 _wait_for_stats 10.53.0.3 "Transfer completed" stats.incoming || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +echo_i "checking whether named calculates outgoing IXFR statistics correctly ($n)" +retry_quiet 10 _wait_for_stats 10.53.0.4 "IXFR ended" stats.outgoing || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +n=$((n+1)) +ret=0 +echo_i "testing fallback to AXFR when max-ixfr-ratio is exceeded ($n)" +nextpart ns4/named.run > /dev/null + +sleep 1 +cp ns3/mytest3.db ns3/mytest.db # change to test zone, too big for IXFR +$RNDCCMD 10.53.0.3 reload | sed 's/^/ns3 /' | cat_i + +# wait for secondary to reload +tret=0 +retry_quiet 5 wait_for_serial 10.53.0.4 test. 4 dig.out.test$n || tret=1 +if [ $tret -eq 1 ]; then + # re-noitfy after 5 seconds, then wait another 10 + $RNDCCMD 10.53.0.3 notify test | set 's/^/ns3 /' | cat_i + retry_quiet 10 wait_for_serial 10.53.0.4 test. 4 dig.out.test$n || ret=1 +fi + +wait_for_log 10 'got nonincremental response' ns4/named.run || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 |