diff options
Diffstat (limited to '')
| -rw-r--r-- | bin/tests/system/smartsign/tests.sh | 368 |
1 files changed, 368 insertions, 0 deletions
diff --git a/bin/tests/system/smartsign/tests.sh b/bin/tests/system/smartsign/tests.sh new file mode 100644 index 0000000..ffde69e --- /dev/null +++ b/bin/tests/system/smartsign/tests.sh @@ -0,0 +1,368 @@ +#!/bin/sh + +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +SYSTEMTESTTOP=.. +. $SYSTEMTESTTOP/conf.sh + +status=0 + +pzone=parent.nil +pfile=parent.db + +czone=child.parent.nil +cfile=child.db + +echo_i "generating child's keys" +# active zsk +czsk1=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -L 30 $czone) + +# not yet published or active +czsk2=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -P none -A none $czone) + +# published but not active +czsk3=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -A none $czone) + +# inactive +czsk4=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -P now-24h -A now-24h -I now $czone) + +# active in 12 hours, inactive 12 hours after that... +czsk5=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -P now+12h -A now+12h -I now+24h $czone) + +# explicit successor to czk5 +# (suppressing warning about lack of removal date) +czsk6=$($KEYGEN -q -S $czsk5 -i 6h 2>/dev/null) + +# active ksk +cksk1=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -fk -L 30 $czone) + +# published but not YET active; will be active in 20 seconds +cksk2=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -fk $czone) +# $SETTIME moved after other $KEYGENs + +echo_i "revoking key" +# revoking key changes its ID +cksk3=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -fk $czone) +cksk4=$($REVOKE $cksk3) + +echo_i "setting up sync key" +cksk5=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -fk -P now+1mo -A now+1mo -Psync now $czone) + +echo_i "and future sync key" +cksk6=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -fk -P now+1mo -A now+1mo -Psync now+1mo $czone) + +echo_i "generating parent keys" +pzsk=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} $pzone) +pksk=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -fk $pzone) + +echo_i "setting child's activation time" +# using now+30s to fix RT 24561 +$SETTIME -A now+30s $cksk2 > /dev/null + +echo_i "signing child zone" +czoneout=$($SIGNER -Sg -e now+1d -X now+2d -o $czone $cfile) + +echo_i "signing parent zone" +pzoneout=$($SIGNER -Sg -o $pzone $pfile) + +czactive=$(keyfile_to_key_id $czsk1) +czgenerated=$(keyfile_to_key_id $czsk2) +czpublished=$(keyfile_to_key_id $czsk3) +czinactive=$(keyfile_to_key_id $czsk4) +czpredecessor=$(keyfile_to_key_id $czsk5) +czsuccessor=$(keyfile_to_key_id $czsk6) +ckactive=$(keyfile_to_key_id $cksk1) +ckpublished=$(keyfile_to_key_id $cksk2) +ckprerevoke=$(keyfile_to_key_id $cksk3) +ckrevoked=$(keyfile_to_key_id $cksk4) + +pzid=$(keyfile_to_key_id $pzsk) +pkid=$(keyfile_to_key_id $pksk) + +echo_i "checking dnssec-signzone output matches expectations" +ret=0 +echo "$pzoneout" | grep 'KSKs: 1 active, 0 stand-by, 0 revoked' > /dev/null || ret=1 +echo "$pzoneout" | grep 'ZSKs: 1 active, 0 stand-by, 0 revoked' > /dev/null || ret=1 +echo "$czoneout" | grep 'KSKs: 1 active, 1 stand-by, 1 revoked' > /dev/null || ret=1 +echo "$czoneout" | grep 'ZSKs: 1 active, 2 stand-by, 0 revoked' > /dev/null || ret=1 +if [ $ret != 0 ]; then + echo_i "parent $pzoneout" + echo_i "child $czoneout" + echo_i "failed"; +fi +status=$((status + ret)) + +echo_i "rechecking dnssec-signzone output with -x" +ret=0 +# use an alternate output file so -x doesn't interfere with later checks +pzoneout=$($SIGNER -Sxg -o $pzone -f ${pfile}2.signed $pfile) +czoneout=$($SIGNER -Sxg -e now+1d -X now+2d -o $czone -f ${cfile}2.signed $cfile) +echo "$pzoneout" | grep 'KSKs: 1 active, 0 stand-by, 0 revoked' > /dev/null || ret=1 +echo "$pzoneout" | grep 'ZSKs: 1 active, 0 present, 0 revoked' > /dev/null || ret=1 +echo "$czoneout" | grep 'KSKs: 1 active, 1 stand-by, 1 revoked' > /dev/null || ret=1 +echo "$czoneout" | grep 'ZSKs: 1 active, 2 present, 0 revoked' > /dev/null || ret=1 +if [ $ret != 0 ]; then + echo_i "parent $pzoneout" + echo_i "child $czoneout" + echo_i "failed"; +fi +status=$((status + ret)) + +echo_i "checking parent zone DNSKEY set" +ret=0 +grep "key id = $pzid" $pfile.signed > /dev/null || { + ret=1 + echo_i "missing expected parent ZSK id = $pzid" +} +grep "key id = $pkid" $pfile.signed > /dev/null || { + ret=1 + echo_i "missing expected parent KSK id = $pkid" +} +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking parent zone DS records" +ret=0 +awk '$2 == "DS" {print $3}' $pfile.signed > dsset.out +grep -w "$ckactive" dsset.out > /dev/null || ret=1 +grep -w "$ckpublished" dsset.out > /dev/null || ret=1 +# revoked key should not be there, hence the && +grep -w "$ckprerevoke" dsset.out > /dev/null && ret=1 +grep -w "$ckrevoked" dsset.out > /dev/null && ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking child zone DNSKEY set" +ret=0 +grep "key id = $ckactive\$" $cfile.signed > /dev/null || { + ret=1 + echo_i "missing expected child KSK id = $ckactive" +} +grep "key id = $ckpublished\$" $cfile.signed > /dev/null || { + ret=1 + echo_i "missing expected child prepublished KSK id = $ckpublished" +} +grep "key id = $ckrevoked\$" $cfile.signed > /dev/null || { + ret=1 + echo_i "missing expected child revoked KSK id = $ckrevoked" +} +grep "key id = $czactive\$" $cfile.signed > /dev/null || { + ret=1 + echo_i "missing expected child ZSK id = $czactive" +} +grep "key id = $czpublished\$" $cfile.signed > /dev/null || { + ret=1 + echo_i "missing expected child prepublished ZSK id = $czpublished" +} +grep "key id = $czinactive\$" $cfile.signed > /dev/null || { + ret=1 + echo_i "missing expected child inactive ZSK id = $czinactive" +} +# should not be there, hence the && +grep "key id = $ckprerevoke\$" $cfile.signed > /dev/null && { + ret=1 + echo_i "found unexpected child pre-revoke ZSK id = $ckprerevoke" +} +grep "key id = $czgenerated\$" $cfile.signed > /dev/null && { + ret=1 + echo_i "found unexpected child generated ZSK id = $czgenerated" +} +grep "key id = $czpredecessor\$" $cfile.signed > /dev/null && { + echo_i "found unexpected ZSK predecessor id = $czpredecessor (ignored)" +} +grep "key id = $czsuccessor\$" $cfile.signed > /dev/null && { + echo_i "found unexpected ZSK successor id = $czsuccessor (ignored)" +} +#grep "key id = $czpredecessor\$" $cfile.signed > /dev/null && ret=1 +#grep "key id = $czsuccessor\$" $cfile.signed > /dev/null && ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking key TTLs are correct" +ret=0 +grep "${czone}. 30 IN" ${czsk1}.key > /dev/null 2>&1 || ret=1 +grep "${czone}. 30 IN" ${cksk1}.key > /dev/null 2>&1 || ret=1 +grep "${czone}. IN" ${czsk2}.key > /dev/null 2>&1 || ret=1 +$SETTIME -L 45 ${czsk2} > /dev/null +grep "${czone}. 45 IN" ${czsk2}.key > /dev/null 2>&1 || ret=1 +$SETTIME -L 0 ${czsk2} > /dev/null +grep "${czone}. IN" ${czsk2}.key > /dev/null 2>&1 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking key TTLs were imported correctly" +ret=0 +awk 'BEGIN {r = 0} $2 == "DNSKEY" && $1 != 30 {r = 1} END {exit r}' \ + ${cfile}.signed || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "re-signing and checking imported TTLs again" +ret=0 +$SETTIME -L 15 ${czsk2} > /dev/null +czoneout=$($SIGNER -Sg -e now+1d -X now+2d -o $czone $cfile) +awk 'BEGIN {r = 0} $2 == "DNSKEY" && $1 != 15 {r = 1} END {exit r}' \ + ${cfile}.signed || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# There is some weirdness in Solaris 10 (Generic_120011-14), which +# is why the next section has all those echo $ret > /dev/null;sync +# commands +echo_i "checking child zone signatures" +ret=0 +# check DNSKEY signatures first +awk '$2 == "RRSIG" && $3 == "DNSKEY" { getline; print $3 }' $cfile.signed > dnskey.sigs +sub=0 +grep -w "$ckactive" dnskey.sigs > /dev/null || sub=1 +if [ $sub != 0 ]; then echo_i "missing ckactive $ckactive (dnskey)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$ckrevoked" dnskey.sigs > /dev/null || sub=1 +if [ $sub != 0 ]; then echo_i "missing ckrevoke $ckrevoke (dnskey)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czactive" dnskey.sigs > /dev/null || sub=1 +if [ $sub != 0 ]; then echo_i "missing czactive $czactive (dnskey)"; ret=1; fi +# should not be there: +echo $ret > /dev/null +sync +sub=0 +grep -w "$ckprerevoke" dnskey.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found ckprerevoke $ckprerevoke (dnskey)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$ckpublished" dnskey.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found ckpublished $ckpublished (dnskey)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czpublished" dnskey.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czpublished $czpublished (dnskey)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czinactive" dnskey.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czinactive $czinactive (dnskey)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czgenerated" dnskey.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czgenerated $czgenerated (dnskey)"; ret=1; fi +# now check other signatures first +awk '$2 == "RRSIG" && $3 != "DNSKEY" && $3 != "CDNSKEY" && $3 != "CDS" { getline; print $3 }' $cfile.signed | sort -un > other.sigs +# should not be there: +echo $ret > /dev/null +sync +sub=0 +grep -w "$ckactive" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found ckactive $ckactive (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$ckpublished" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found ckpublished $ckpublished (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$ckprerevoke" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found ckprerevoke $ckprerevoke (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$ckrevoked" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found ckrevoked $ckrevoked (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czpublished" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czpublished $czpublished (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czinactive" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czinactive $czinactive (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czgenerated" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czgenerated $czgenerated (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czpredecessor" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czpredecessor $czpredecessor (other)"; ret=1; fi +echo $ret > /dev/null +sync +sub=0 +grep -w "$czsuccessor" other.sigs > /dev/null && sub=1 +if [ $sub != 0 ]; then echo_i "found czsuccessor $czsuccessor (other)"; ret=1; fi +if [ $ret != 0 ]; then + sed 's/^/I:dnskey sigs: /' < dnskey.sigs + sed 's/^/I:other sigs: /' < other.sigs + echo_i "failed"; +fi +status=$((status + ret)) + +echo_i "checking RRSIG expiry date correctness" +dnskey_expiry=$($CHECKZONE -o - $czone $cfile.signed 2> /dev/null | + awk '$4 == "RRSIG" && $5 == "DNSKEY" {print $9; exit}' | + cut -c1-10) +soa_expiry=$($CHECKZONE -o - $czone $cfile.signed 2> /dev/null | + awk '$4 == "RRSIG" && $5 == "SOA" {print $9; exit}' | + cut -c1-10) +[ $dnskey_expiry -gt $soa_expiry ] || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "waiting 30 seconds for key activation" +sleep 30 +echo_i "re-signing child zone" +czoneout2=$($SIGNER -Sg -o $czone -f $cfile.new $cfile.signed) +mv $cfile.new $cfile.signed + +echo_i "checking dnssec-signzone output matches expectations" +ret=0 +echo "$czoneout2" | grep 'KSKs: 2 active, 0 stand-by, 1 revoked' > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking child zone signatures again" +ret=0 +awk '$2 == "RRSIG" && $3 == "DNSKEY" { getline; print $3 }' $cfile.signed > dnskey.sigs +grep -w "$ckpublished" dnskey.sigs > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking sync record publication" +ret=0 +awk 'BEGIN { r=1 } $2 == "CDNSKEY" { r=0 } END { exit r }' $cfile.signed || ret=1 +awk 'BEGIN { r=1 } $2 == "CDS" { r=0 } END { exit r }' $cfile.signed || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# this also checks that the future sync record is not yet published +echo_i "checking sync record deletion" +ret=0 +$SETTIME -P now -A now -Dsync now ${cksk5} > /dev/null +$SIGNER -Sg -o $czone -f $cfile.new $cfile.signed > /dev/null +mv $cfile.new $cfile.signed +awk 'BEGIN { r=1 } $2 == "CDNSKEY" { r=0 } END { exit r }' $cfile.signed && ret=1 +awk 'BEGIN { r=1 } $2 == "CDS" { r=0 } END { exit r }' $cfile.signed && ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 |