summaryrefslogtreecommitdiffstats
path: root/bin/tests/system/xfer/tests.sh
diff options
context:
space:
mode:
Diffstat (limited to '')
-rwxr-xr-xbin/tests/system/xfer/tests.sh361
1 files changed, 180 insertions, 181 deletions
diff --git a/bin/tests/system/xfer/tests.sh b/bin/tests/system/xfer/tests.sh
index 607d68a..b8cb027 100755
--- a/bin/tests/system/xfer/tests.sh
+++ b/bin/tests/system/xfer/tests.sh
@@ -20,51 +20,51 @@ RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s"
status=0
n=0
-n=$((n+1))
+n=$((n + 1))
echo_i "testing basic zone transfer functionality (from primary) ($n)"
tmp=0
-$DIG $DIGOPTS example. @10.53.0.2 axfr > dig.out.ns2.test$n || tmp=1
+$DIG $DIGOPTS example. @10.53.0.2 axfr >dig.out.ns2.test$n || tmp=1
grep "^;" dig.out.ns2.test$n | cat_i
digcomp dig1.good dig.out.ns2.test$n || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "testing basic zone transfer functionality (from secondary) ($n)"
tmp=0
#
# Spin to allow the zone to transfer.
#
-wait_for_xfer () {
- $DIG $DIGOPTS example. @10.53.0.3 axfr > dig.out.ns3.test$n || return 1
- grep "^;" dig.out.ns3.test$n > /dev/null && return 1
- return 0
+wait_for_xfer() {
+ $DIG $DIGOPTS example. @10.53.0.3 axfr >dig.out.ns3.test$n || return 1
+ grep "^;" dig.out.ns3.test$n >/dev/null && return 1
+ return 0
}
retry_quiet 25 wait_for_xfer || tmp=1
grep "^;" dig.out.ns3.test$n | cat_i
digcomp dig1.good dig.out.ns3.test$n || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "testing TSIG signed zone transfers ($n)"
tmp=0
-$DIG $DIGOPTS tsigzone. @10.53.0.2 axfr -y tsigzone.:1234abcd8765 > dig.out.ns2.test$n || tmp=1
+$DIG $DIGOPTS tsigzone. @10.53.0.2 axfr -y tsigzone.:1234abcd8765 >dig.out.ns2.test$n || tmp=1
grep "^;" dig.out.ns2.test$n | cat_i
#
# Spin to allow the zone to transfer.
#
-wait_for_xfer_tsig () {
- $DIG $DIGOPTS tsigzone. @10.53.0.3 axfr -y tsigzone.:1234abcd8765 > dig.out.ns3.test$n || return 1
- grep "^;" dig.out.ns3.test$n > /dev/null && return 1
- return 0
+wait_for_xfer_tsig() {
+ $DIG $DIGOPTS tsigzone. @10.53.0.3 axfr -y tsigzone.:1234abcd8765 >dig.out.ns3.test$n || return 1
+ grep "^;" dig.out.ns3.test$n >/dev/null && return 1
+ return 0
}
retry_quiet 25 wait_for_xfer_tsig || tmp=1
grep "^;" dig.out.ns3.test$n | cat_i
digcomp dig.out.ns2.test$n dig.out.ns3.test$n || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
echo_i "reload servers for in preparation for ixfr-from-differences tests"
@@ -108,53 +108,53 @@ rndc_reload ns7 10.53.0.7
sleep 3
-n=$((n+1))
+n=$((n + 1))
echo_i "testing zone is dumped after successful transfer ($n)"
tmp=0
$DIG $DIGOPTS +noall +answer +multi @10.53.0.2 \
- secondary. soa > dig.out.ns2.test$n || tmp=1
-grep "1397051952 ; serial" dig.out.ns2.test$n > /dev/null 2>&1 || tmp=1
-grep "1397051952 ; serial" ns2/sec.db > /dev/null 2>&1 || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+ secondary. soa >dig.out.ns2.test$n || tmp=1
+grep "1397051952 ; serial" dig.out.ns2.test$n >/dev/null 2>&1 || tmp=1
+grep "1397051952 ; serial" ns2/sec.db >/dev/null 2>&1 || tmp=1
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "testing ixfr-from-differences yes; ($n)"
tmp=0
echo_i "wait for reloads..."
wait_for_reloads() (
- $DIG $DIGOPTS @10.53.0.6 +noall +answer soa primary > dig.out.soa1.ns6.test$n
- grep "1397051953" dig.out.soa1.ns6.test$n > /dev/null || return 1
- $DIG $DIGOPTS @10.53.0.1 +noall +answer soa secondary > dig.out.soa2.ns1.test$n
- grep "1397051953" dig.out.soa2.ns1.test$n > /dev/null || return 1
- $DIG $DIGOPTS @10.53.0.2 +noall +answer soa example > dig.out.soa3.ns2.test$n
- grep "1397051953" dig.out.soa3.ns2.test$n > /dev/null || return 1
- return 0
+ $DIG $DIGOPTS @10.53.0.6 +noall +answer soa primary >dig.out.soa1.ns6.test$n
+ grep "1397051953" dig.out.soa1.ns6.test$n >/dev/null || return 1
+ $DIG $DIGOPTS @10.53.0.1 +noall +answer soa secondary >dig.out.soa2.ns1.test$n
+ grep "1397051953" dig.out.soa2.ns1.test$n >/dev/null || return 1
+ $DIG $DIGOPTS @10.53.0.2 +noall +answer soa example >dig.out.soa3.ns2.test$n
+ grep "1397051953" dig.out.soa3.ns2.test$n >/dev/null || return 1
+ return 0
)
retry_quiet 20 wait_for_reloads || tmp=1
echo_i "wait for transfers..."
wait_for_transfers() (
- a=0 b=0 c=0 d=0
- $DIG $DIGOPTS @10.53.0.3 +noall +answer soa example > dig.out.soa1.ns3.test$n
- grep "1397051953" dig.out.soa1.ns3.test$n > /dev/null && a=1
- $DIG $DIGOPTS @10.53.0.3 +noall +answer soa primary > dig.out.soa2.ns3.test$n
- grep "1397051953" dig.out.soa2.ns3.test$n > /dev/null && b=1
- $DIG $DIGOPTS @10.53.0.6 +noall +answer soa secondary > dig.out.soa3.ns6.test$n
- grep "1397051953" dig.out.soa3.ns6.test$n > /dev/null && c=1
- [ $a -eq 1 -a $b -eq 1 -a $c -eq 1 ] && return 0
-
- # re-notify if necessary
- $RNDCCMD 10.53.0.6 notify primary 2>&1 | sed 's/^/ns6 /' | cat_i
- $RNDCCMD 10.53.0.1 notify secondary 2>&1 | sed 's/^/ns1 /' | cat_i
- $RNDCCMD 10.53.0.2 notify example 2>&1 | sed 's/^/ns2 /' | cat_i
- return 1
+ a=0 b=0 c=0 d=0
+ $DIG $DIGOPTS @10.53.0.3 +noall +answer soa example >dig.out.soa1.ns3.test$n
+ grep "1397051953" dig.out.soa1.ns3.test$n >/dev/null && a=1
+ $DIG $DIGOPTS @10.53.0.3 +noall +answer soa primary >dig.out.soa2.ns3.test$n
+ grep "1397051953" dig.out.soa2.ns3.test$n >/dev/null && b=1
+ $DIG $DIGOPTS @10.53.0.6 +noall +answer soa secondary >dig.out.soa3.ns6.test$n
+ grep "1397051953" dig.out.soa3.ns6.test$n >/dev/null && c=1
+ [ $a -eq 1 -a $b -eq 1 -a $c -eq 1 ] && return 0
+
+ # re-notify if necessary
+ $RNDCCMD 10.53.0.6 notify primary 2>&1 | sed 's/^/ns6 /' | cat_i
+ $RNDCCMD 10.53.0.1 notify secondary 2>&1 | sed 's/^/ns1 /' | cat_i
+ $RNDCCMD 10.53.0.2 notify example 2>&1 | sed 's/^/ns2 /' | cat_i
+ return 1
)
retry_quiet 20 wait_for_transfers || tmp=1
$DIG $DIGOPTS example. \
- @10.53.0.3 axfr > dig.out.ns3.test$n || tmp=1
+ @10.53.0.3 axfr >dig.out.ns3.test$n || tmp=1
grep "^;" dig.out.ns3.test$n | cat_i
digcomp dig2.good dig.out.ns3.test$n || tmp=1
@@ -163,20 +163,20 @@ digcomp dig2.good dig.out.ns3.test$n || tmp=1
test -f ns3/example.bk || tmp=1
test -f ns3/example.bk.jnl || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "testing ixfr-from-differences primary; (primary zone) ($n)"
tmp=0
$DIG $DIGOPTS primary. \
- @10.53.0.6 axfr > dig.out.ns6.test$n || tmp=1
+ @10.53.0.6 axfr >dig.out.ns6.test$n || tmp=1
grep "^;" dig.out.ns6.test$n | cat_i
$DIG $DIGOPTS primary. \
- @10.53.0.3 axfr > dig.out.ns3.test$n || tmp=1
-grep "^;" dig.out.ns3.test$n > /dev/null && cat_i dig.out.ns3.test$n
+ @10.53.0.3 axfr >dig.out.ns3.test$n || tmp=1
+grep "^;" dig.out.ns3.test$n >/dev/null && cat_i dig.out.ns3.test$n
digcomp dig.out.ns6.test$n dig.out.ns3.test$n || tmp=1
@@ -184,19 +184,19 @@ digcomp dig.out.ns6.test$n dig.out.ns3.test$n || tmp=1
test -f ns3/primary.bk || tmp=1
test -f ns3/primary.bk.jnl || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "testing ixfr-from-differences primary; (secondary zone) ($n)"
tmp=0
$DIG $DIGOPTS secondary. \
- @10.53.0.6 axfr > dig.out.ns6.test$n || tmp=1
+ @10.53.0.6 axfr >dig.out.ns6.test$n || tmp=1
grep "^;" dig.out.ns6.test$n | cat_i
$DIG $DIGOPTS secondary. \
- @10.53.0.1 axfr > dig.out.ns1.test$n || tmp=1
+ @10.53.0.1 axfr >dig.out.ns1.test$n || tmp=1
grep "^;" dig.out.ns1.test$n | cat_i
digcomp dig.out.ns6.test$n dig.out.ns1.test$n || tmp=1
@@ -205,10 +205,10 @@ digcomp dig.out.ns6.test$n dig.out.ns1.test$n || tmp=1
test -f ns6/sec.bk || tmp=1
test -f ns6/sec.bk.jnl && tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "testing ixfr-from-differences secondary; (secondary zone) ($n)"
tmp=0
@@ -216,19 +216,19 @@ tmp=0
test -f ns7/primary2.db || tmp=1
test -f ns7/primary2.db.jnl && tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "testing ixfr-from-differences secondary; (secondary zone) ($n)"
tmp=0
$DIG $DIGOPTS secondary. \
- @10.53.0.1 axfr > dig.out.ns1.test$n || tmp=1
+ @10.53.0.1 axfr >dig.out.ns1.test$n || tmp=1
grep "^;" dig.out.ns1.test$n | cat_i
$DIG $DIGOPTS secondary. \
- @10.53.0.7 axfr > dig.out.ns7.test$n || tmp=1
+ @10.53.0.7 axfr >dig.out.ns7.test$n || tmp=1
grep "^;" dig.out.ns7.test$n | cat_i
digcomp dig.out.ns7.test$n dig.out.ns1.test$n || tmp=1
@@ -237,16 +237,15 @@ digcomp dig.out.ns7.test$n dig.out.ns1.test$n || tmp=1
test -f ns7/sec.bk || tmp=1
test -f ns7/sec.bk.jnl || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "check that a multi-message uncompressable zone transfers ($n)"
-$DIG axfr . -p ${PORT} @10.53.0.4 | grep SOA > axfr.out
-if test `wc -l < axfr.out` != 2
-then
- echo_i "failed"
- status=$((status+1))
+$DIG axfr . -p ${PORT} @10.53.0.4 | grep SOA >axfr.out
+if test $(wc -l <axfr.out) != 2; then
+ echo_i "failed"
+ status=$((status + 1))
fi
# now we test transfers with assorted TSIG glitches
@@ -254,10 +253,10 @@ DIGCMD="$DIG $DIGOPTS @10.53.0.4"
SENDCMD="$PERL ../send.pl 10.53.0.5 $EXTRAPORT1"
echo_i "testing that incorrectly signed transfers will fail..."
-n=$((n+1))
+n=$((n + 1))
echo_i "initial correctly-signed transfer should succeed ($n)"
-$SENDCMD < ans5/goodaxfr
+$SENDCMD <ans5/goodaxfr
# Initially, ns4 is not authoritative for anything.
# Now that ans is up and running with the right data, we make ns4
@@ -276,120 +275,120 @@ nextpart ns4/named.run >/dev/null
rndc_reload ns4 10.53.0.4
wait_for_soa() (
- $DIGCMD nil. SOA > dig.out.ns4.test$n
- grep SOA dig.out.ns4.test$n > /dev/null
+ $DIGCMD nil. SOA >dig.out.ns4.test$n
+ grep SOA dig.out.ns4.test$n >/dev/null
)
retry_quiet 10 wait_for_soa
-nextpart ns4/named.run | grep "Transfer status: success" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "Transfer status: success" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'initial AXFR' >/dev/null || {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "unsigned transfer ($n)"
-$SENDCMD < ans5/unsigned
+$SENDCMD <ans5/unsigned
$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
sleep 2
-nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'unsigned AXFR' >/dev/null && {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "bad keydata ($n)"
-$SENDCMD < ans5/badkeydata
+$SENDCMD <ans5/badkeydata
$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
sleep 2
-nextpart ns4/named.run | grep "Transfer status: tsig verify failure" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "Transfer status: tsig verify failure" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'bad keydata AXFR' >/dev/null && {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "partially-signed transfer ($n)"
-$SENDCMD < ans5/partial
+$SENDCMD <ans5/partial
$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
sleep 2
-nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'partially signed AXFR' >/dev/null && {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "unknown key ($n)"
-$SENDCMD < ans5/unknownkey
+$SENDCMD <ans5/unknownkey
$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
sleep 2
-nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'unknown key AXFR' >/dev/null && {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "incorrect key ($n)"
-$SENDCMD < ans5/wrongkey
+$SENDCMD <ans5/wrongkey
$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
sleep 2
-nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'incorrect key AXFR' >/dev/null && {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "bad message id ($n)"
-$SENDCMD < ans5/badmessageid
+$SENDCMD <ans5/badmessageid
# Uncomment to see AXFR stream with mismatching IDs.
# $DIG $DIGOPTS @10.53.0.5 -y tsig_key:LSAnCU+Z nil. AXFR +all
@@ -399,97 +398,97 @@ $RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
sleep 2
msg="detected message ID mismatch on incoming AXFR stream, transfer will fail in BIND 9.17.2 and later if AXFR source is not fixed"
-nextpart ns4/named.run | grep "$msg" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "$msg" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'bad message id' >/dev/null || {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "mismatched SOA ($n)"
-${SENDCMD} < ans5/soamismatch
+${SENDCMD} <ans5/soamismatch
$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i
sleep 2
-nextpart ns4/named.run | grep "Transfer status: FORMERR" > /dev/null || {
- echo_i "failed: expected status was not logged"
- status=$((status+1))
+nextpart ns4/named.run | grep "Transfer status: FORMERR" >/dev/null || {
+ echo_i "failed: expected status was not logged"
+ status=$((status + 1))
}
$DIGCMD nil. TXT | grep 'SOA mismatch AXFR' >/dev/null && {
- echo_i "failed"
- status=$((status+1))
+ echo_i "failed"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "check that we ask for and get a EDNS EXPIRE response ($n)"
# force a refresh query
$RNDCCMD 10.53.0.7 refresh edns-expire 2>&1 | sed 's/^/ns7 /' | cat_i
sleep 10
# there may be multiple log entries so get the last one.
-expire=`awk '/edns-expire\/IN: got EDNS EXPIRE of/ { x=$9 } END { print x }' ns7/named.run`
+expire=$(awk '/edns-expire\/IN: got EDNS EXPIRE of/ { x=$9 } END { print x }' ns7/named.run)
test ${expire:-0} -gt 0 -a ${expire:-0} -lt 1814400 || {
- echo_i "failed (expire=${expire:-0})"
- status=$((status+1))
+ echo_i "failed (expire=${expire:-0})"
+ status=$((status + 1))
}
-n=$((n+1))
+n=$((n + 1))
echo_i "test smaller transfer TCP message size ($n)"
$DIG $DIGOPTS example. @10.53.0.8 axfr \
- -y key1.:1234abcd8765 > dig.out.msgsize.test$n || status=1
+ -y key1.:1234abcd8765 >dig.out.msgsize.test$n || status=1
$DOS2UNIX dig.out.msgsize.test$n >/dev/null 2>&1
-bytes=`wc -c < dig.out.msgsize.test$n`
+bytes=$(wc -c <dig.out.msgsize.test$n)
if [ $bytes -ne 459357 ]; then
- echo_i "failed axfr size check"
- status=$((status+1))
+ echo_i "failed axfr size check"
+ status=$((status + 1))
fi
-num_messages=`cat ns8/named.run | grep "sending TCP message of" | wc -l`
+num_messages=$(cat ns8/named.run | grep "sending TCP message of" | wc -l)
if [ $num_messages -le 300 ]; then
- echo_i "failed transfer message count check"
- status=$((status+1))
+ echo_i "failed transfer message count check"
+ status=$((status + 1))
fi
-n=$((n+1))
+n=$((n + 1))
echo_i "test mapped zone with out of zone data ($n)"
tmp=0
-$DIG -p ${PORT} txt mapped @10.53.0.3 > dig.out.1.test$n
-grep "status: NOERROR," dig.out.1.test$n > /dev/null || tmp=1
+$DIG -p ${PORT} txt mapped @10.53.0.3 >dig.out.1.test$n
+grep "status: NOERROR," dig.out.1.test$n >/dev/null || tmp=1
stop_server ns3
start_server --noclean --restart --port ${PORT} ns3
-check_mapped () {
- $DIG -p ${PORT} txt mapped @10.53.0.3 > dig.out.2.test$n
- grep "status: NOERROR," dig.out.2.test$n > /dev/null || return 1
- $DIG -p ${PORT} axfr mapped @10.53.0.3 > dig.out.3.test$n
- digcomp knowngood.mapped dig.out.3.test$n || return 1
- return 0
+check_mapped() {
+ $DIG -p ${PORT} txt mapped @10.53.0.3 >dig.out.2.test$n
+ grep "status: NOERROR," dig.out.2.test$n >/dev/null || return 1
+ $DIG -p ${PORT} axfr mapped @10.53.0.3 >dig.out.3.test$n
+ digcomp knowngood.mapped dig.out.3.test$n || return 1
+ return 0
}
retry_quiet 10 check_mapped || tmp=1
[ "$tmp" -ne 0 ] && echo_i "failed"
-status=$((status+tmp))
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "test that a zone with too many records is rejected (AXFR) ($n)"
tmp=0
grep "'axfr-too-big/IN'.*: too many records" ns6/named.run >/dev/null || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "test that a zone with too many records is rejected (IXFR) ($n)"
tmp=0
-nextpart ns6/named.run > /dev/null
-$NSUPDATE << EOF
+nextpart ns6/named.run >/dev/null
+$NSUPDATE <<EOF
zone ixfr-too-big
server 10.53.0.1 ${PORT}
update add the-31st-record.ixfr-too-big 0 TXT this is it
@@ -497,10 +496,10 @@ send
EOF
msg="'ixfr-too-big/IN' from 10.53.0.1#${PORT}: Transfer status: too many records"
wait_for_log 10 "$msg" ns6/named.run || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "checking whether dig calculates AXFR statistics correctly ($n)"
tmp=0
# Loop until the secondary server manages to transfer the "xfer-stats" zone so
@@ -508,40 +507,40 @@ tmp=0
# Use -b so that we can discern between incoming and outgoing transfers in ns3
# logs later on.
wait_for_xfer() (
- $DIG $DIGOPTS +noedns +stat -b 10.53.0.2 @10.53.0.3 xfer-stats. AXFR > dig.out.ns3.test$n
- grep "; Transfer failed" dig.out.ns3.test$n > /dev/null || return 0
- return 1
+ $DIG $DIGOPTS +noedns +stat -b 10.53.0.2 @10.53.0.3 xfer-stats. AXFR >dig.out.ns3.test$n
+ grep "; Transfer failed" dig.out.ns3.test$n >/dev/null || return 0
+ return 1
)
if retry_quiet 10 wait_for_xfer; then
- get_dig_xfer_stats dig.out.ns3.test$n > stats.dig
- diff axfr-stats.good stats.dig || tmp=1
+ get_dig_xfer_stats dig.out.ns3.test$n >stats.dig
+ diff axfr-stats.good stats.dig || tmp=1
else
- echo_i "timed out waiting for zone transfer"
+ echo_i "timed out waiting for zone transfer"
fi
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
# Note: in the next two tests, we use ns3 logs for checking both incoming and
# outgoing transfer statistics as ns3 is both a secondary server (for ns1) and a
# primary server (for dig queries from the previous test) for "xfer-stats".
-n=$((n+1))
+n=$((n + 1))
echo_i "checking whether named calculates incoming AXFR statistics correctly ($n)"
tmp=0
-get_named_xfer_stats ns3/named.run 10.53.0.1 xfer-stats "Transfer completed" > stats.incoming
+get_named_xfer_stats ns3/named.run 10.53.0.1 xfer-stats "Transfer completed" >stats.incoming
diff axfr-stats.good stats.incoming || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
-n=$((n+1))
+n=$((n + 1))
echo_i "checking whether named calculates outgoing AXFR statistics correctly ($n)"
tmp=0
check_xfer_stats() {
- get_named_xfer_stats ns3/named.run 10.53.0.2 xfer-stats "AXFR ended" > stats.outgoing
- diff axfr-stats.good stats.outgoing > /dev/null
+ get_named_xfer_stats ns3/named.run 10.53.0.2 xfer-stats "AXFR ended" >stats.outgoing
+ diff axfr-stats.good stats.outgoing >/dev/null
}
retry_quiet 10 check_xfer_stats || tmp=1
-if test $tmp != 0 ; then echo_i "failed"; fi
-status=$((status+tmp))
+if test $tmp != 0; then echo_i "failed"; fi
+status=$((status + tmp))
echo_i "exit status: $status"
[ $status -eq 0 ] || exit 1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 21:51:29 +0000