diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/arm/catz.rst | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/doc/arm/catz.rst b/doc/arm/catz.rst new file mode 100644 index 0000000..177a562 --- /dev/null +++ b/doc/arm/catz.rst @@ -0,0 +1,241 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _catz-info: + +Catalog Zones +------------- + +A "catalog zone" is a special DNS zone that contains a list of other +zones to be served, along with their configuration parameters. Zones +listed in a catalog zone are called "member zones." When a catalog zone +is loaded or transferred to a secondary server which supports this +functionality, the secondary server creates the member zones +automatically. When the catalog zone is updated (for example, to add or +delete member zones, or change their configuration parameters), those +changes are immediately put into effect. Because the catalog zone is a +normal DNS zone, these configuration changes can be propagated using the +standard AXFR/IXFR zone transfer mechanism. + +Catalog zones' format and behavior are specified as an Internet draft +for interoperability among DNS implementations. The +latest revision of the DNS catalog zones draft can be found here: +https://datatracker.ietf.org/doc/draft-toorop-dnsop-dns-catalog-zones/ . + +Principle of Operation +~~~~~~~~~~~~~~~~~~~~~~ + +Normally, if a zone is to be served by a secondary server, the +``named.conf`` file on the server must list the zone, or the zone must +be added using ``rndc addzone``. In environments with a large number of +secondary servers, and/or where the zones being served are changing +frequently, the overhead involved in maintaining consistent zone +configuration on all the secondary servers can be significant. + +A catalog zone is a way to ease this administrative burden: it is a DNS +zone that lists member zones that should be served by secondary servers. +When a secondary server receives an update to the catalog zone, it adds, +removes, or reconfigures member zones based on the data received. + +To use a catalog zone, it must first be set up as a normal zone on both the +primary and secondary servers that are configured to use it. It +must also be added to a ``catalog-zones`` list in the ``options`` or +``view`` statement in ``named.conf``. This is comparable to the way a +policy zone is configured as a normal zone and also listed in a +``response-policy`` statement. + +To use the catalog zone feature to serve a new member zone: + +- Set up the member zone to be served on the primary as normal. This + can be done by editing ``named.conf`` or by running + ``rndc addzone``. + +- Add an entry to the catalog zone for the new member zone. This can + be done by editing the catalog zone's zone file and running + ``rndc reload``, or by updating the zone using ``nsupdate``. + +The change to the catalog zone is propagated from the primary to all +secondaries using the normal AXFR/IXFR mechanism. When the secondary receives the +update to the catalog zone, it detects the entry for the new member +zone, creates an instance of that zone on the secondary server, and points +that instance to the ``masters`` specified in the catalog zone data. The +newly created member zone is a normal secondary zone, so BIND +immediately initiates a transfer of zone contents from the primary. Once +complete, the secondary starts serving the member zone. + +Removing a member zone from a secondary server requires only +deleting the member zone's entry in the catalog zone; the change to the +catalog zone is propagated to the secondary server using the normal +AXFR/IXFR transfer mechanism. The secondary server, on processing the +update, notices that the member zone has been removed, stops +serving the zone, and removes it from its list of configured zones. +However, removing the member zone from the primary server must be done +by editing the configuration file or running +``rndc delzone``. + +Configuring Catalog Zones +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Catalog zones are configured with a ``catalog-zones`` statement in the +``options`` or ``view`` section of ``named.conf``. For example: + +:: + + catalog-zones { + zone "catalog.example" + default-masters { 10.53.0.1; } + in-memory no + zone-directory "catzones" + min-update-interval 10; + }; + +This statement specifies that the zone ``catalog.example`` is a catalog +zone. This zone must be properly configured in the same view. In most +configurations, it would be a secondary zone. + +The options following the zone name are not required, and may be +specified in any order. + +``default-masters`` + This option defines the default primaries for member + zones listed in a catalog zone, and can be overridden by options within + a catalog zone. If no such options are included, then member zones + transfer their contents from the servers listed in this option. + +``in-memory`` + This option, if set to ``yes``, causes member zones to be + stored only in memory. This is functionally equivalent to configuring a + secondary zone without a ``file`` option. The default is ``no``; member + zones' content is stored locally in a file whose name is + automatically generated from the view name, catalog zone name, and + member zone name. + +``zone-directory`` + This option causes local copies of member zones' zone files to be + stored in the specified directory, if ``in-memory`` is not set to + ``yes``. The default is to store zone files in the server's working + directory. A non-absolute pathname in ``zone-directory`` is assumed + to be relative to the working directory. + +``min-update-interval`` + This option sets the minimum interval between updates to catalog + zones, in seconds. If an update to a catalog zone (for example, via + IXFR) happens less than ``min-update-interval`` seconds after the + most recent update, the changes are not carried out until this + interval has elapsed. The default is 5 seconds. + +Catalog zones are defined on a per-view basis. Configuring a non-empty +``catalog-zones`` statement in a view automatically turns on +``allow-new-zones`` for that view. This means that ``rndc addzone`` +and ``rndc delzone`` also work in any view that supports catalog +zones. + +Catalog Zone Format +~~~~~~~~~~~~~~~~~~~ + +A catalog zone is a regular DNS zone; therefore, it must have a single +``SOA`` and at least one ``NS`` record. + +A record stating the version of the catalog zone format is also +required. If the version number listed is not supported by the server, +then a catalog zone may not be used by that server. + +:: + + catalog.example. IN SOA . . 2016022901 900 600 86400 1 + catalog.example. IN NS nsexample. + version.catalog.example. IN TXT "1" + +Note that this record must have the domain name +``version.catalog-zone-name``. The data +stored in a catalog zone is indicated by the domain name label +immediately before the catalog zone domain. + +Catalog zone options can be set either globally for the whole catalog +zone or for a single member zone. Global options override the settings +in the configuration file, and member zone options override global +options. + +Global options are set at the apex of the catalog zone, e.g.: + +:: + + masters.catalog.example. IN AAAA 2001:db8::1 + +BIND currently supports the following options: + +- A simple ``masters`` definition: + + :: + + masters.catalog.example. IN A 192.0.2.1 + + + This option defines a primary server for the member zones, which can be + either an A or AAAA record. If multiple primaries are set, the order in + which they are used is random. + +- A ``masters`` with a TSIG key defined: + + :: + + label.masters.catalog.example. IN A 192.0.2.2 + label.masters.catalog.example. IN TXT "tsig_key_name" + + + This option defines a primary server for the member zone with a TSIG + key set. The TSIG key must be configured in the configuration file. + ``label`` can be any valid DNS label. + +- ``allow-query`` and ``allow-transfer`` ACLs: + + :: + + allow-query.catalog.example. IN APL 1:10.0.0.1/24 + allow-transfer.catalog.example. IN APL !1:10.0.0.1/32 1:10.0.0.0/24 + + + These options are the equivalents of ``allow-query`` and + ``allow-transfer`` in a zone declaration in the ``named.conf`` + configuration file. The ACL is processed in order; if there is no + match to any rule, the default policy is to deny access. For the + syntax of the APL RR, see :rfc:`3123`. + +A member zone is added by including a ``PTR`` resource record in the +``zones`` sub-domain of the catalog zone. The record label is a +``SHA-1`` hash of the member zone name in wire format. The target of the +PTR record is the member zone name. For example, to add the member zone +``domain.example``: + +:: + + 5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN PTR domain.example. + +The hash is necessary to identify options for a specific member zone. +The member zone-specific options are defined the same way as global +options, but in the member zone subdomain: + +:: + + masters.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN A 192.0.2.2 + label.masters.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN AAAA 2001:db8::2 + label.masters.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN TXT "tsig_key" + allow-query.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN APL 1:10.0.0.0/24 + +Options defined for a specific zone override the +global options defined in the catalog zone. These in turn override the +global options defined in the ``catalog-zones`` statement in the +configuration file. + +Note that none of the global records for an option are inherited if any +records are defined for that option for the specific zone. For example, +if the zone had a ``masters`` record of type A but not AAAA, it +would *not* inherit the type AAAA record from the global option. |