1 files changed, 147 insertions, 0 deletions
diff --git a/doc/dnssec-guide/getting-started.rst b/doc/dnssec-guide/getting-started.rst
new file mode 100644
index 0000000..1b212ff
--- /dev/null
+++ b/doc/dnssec-guide/getting-started.rst
@@ -0,0 +1,147 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0.  If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _getting_started:
+
+Getting Started
+---------------
+
+.. _software_requirements:
+
+Software Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+This guide assumes BIND 9.16.9 or newer, although the more elaborate manual
+procedures do work with all versions of BIND later than 9.9.
+
+We recommend running the latest stable version to get the most
+complete DNSSEC configuration, as well as the latest security fixes.
+
+.. _hardware_requirements:
+
+Hardware Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+.. _recursive_server_hardware:
+
+Recursive Server Hardware
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Enabling DNSSEC validation on a recursive server makes it a *validating
+resolver*. The job of a validating resolver is to fetch additional
+information that can be used to computationally verify the answer set.
+Contrary to popular belief, the increase in resource consumption is very modest:
+
+1. *CPU*: a validating resolver executes cryptographic functions on cache-miss
+   answers, which leads to increased CPU usage. Thanks to standard DNS caching
+   and contemporary CPUs, the increase in CPU-time consumption in a steady
+   state is negligible - typically on the order of 5%. For a brief period (a few
+   minutes) after the resolver starts, the increase might be as much as 20%, but it
+   quickly decreases as the DNS cache fills in.
+
+2. *System memory*: DNSSEC leads to larger answer sets and occupies
+   more memory space. With typical ISP traffic and the state of the Internet as
+   of mid-2022, memory consumption for the cache increases by roughly 20%.
+
+3. *Network interfaces*: although DNSSEC does increase the amount of DNS
+   traffic overall, in practice this increase is often within measurement
+   error.
+
+.. _authoritative_server_hardware:
+
+Authoritative Server Hardware
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+On the authoritative server side, DNSSEC is enabled on a zone-by-zone
+basis. When a zone is DNSSEC-enabled, it is also known as "signed."
+Below are the expected changes to resource consumption caused by serving
+DNSSEC-signed zones:
+
+1. *CPU*: a DNSSEC-signed zone requires periodic re-signing, which is a
+   cryptographic function that is CPU-intensive. If your DNS zone is
+   dynamic or changes frequently, that also adds to higher CPU loads.
+
+2. *System storage*: A signed zone is definitely larger than an unsigned
+   zone. How much larger? See
+   :ref:`your_zone_before_and_after_dnssec` for a comparison
+   example. The final size depends on the structure of the zone, the signing algorithm,
+   the number of keys, the choice of NSEC or NSEC3, the ratio of signed delegations, the zone file
+   format, etc. Usually, the size of a signed zone ranges from a negligible
+   increase to as much as three times the size of the unsigned zone.
+
+3. *System memory*: Larger DNS zone files take up not only more storage
+   space on the file system, but also more space when they are loaded
+   into system memory. The final memory consumption also depends on all the
+   variables listed above: in the typical case the increase is around half of
+   the unsigned zone memory consumption, but it can be as high as three times
+   for some corner cases.
+
+4. *Network interfaces*: While your authoritative name servers will
+   begin sending back larger responses, it is unlikely that you need to
+   upgrade your network interface card (NIC) on the name server unless
+   you have some truly outdated hardware.
+
+One factor to consider, but over which you really have no control, is
+the number of users who query your domain name who themselves have DNSSEC
+enabled. As of mid-2022, measurements by `APNIC
+<https://stats.labs.apnic.net/dnssec>`__ show 41% of Internet users send
+DNSSEC-aware queries. This means that more DNS queries for your domain will
+take advantage of the additional security features, which will result in
+increased system load and possibly network traffic.
+
+.. _network_requirements:
+
+Network Requirements
+~~~~~~~~~~~~~~~~~~~~
+
+From a network perspective, DNS and DNSSEC packets are very similar;
+DNSSEC packets are just bigger, which means DNS is more likely to use
+TCP. You should test for the following two items to make sure your
+network is ready for DNSSEC:
+
+1. *DNS over TCP*: Verify network connectivity over TCP port 53, which
+   may mean updating firewall policies or Access Control Lists (ACL) on
+   routers. See :ref:`dns_uses_tcp` for more details.
+
+2. *Large UDP packets*: Some network equipment, such as firewalls, may
+   make assumptions about the size of DNS UDP packets and incorrectly
+   reject DNS traffic that appears "too big." Verify that the
+   responses your name server generates are being seen by the rest of the
+   world: see :ref:`whats_edns0_all_about` for more details.
+
+.. _operational_requirements:
+
+Operational Requirements
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. _parent_zone:
+
+Parent Zone
+^^^^^^^^^^^
+
+Before starting your DNSSEC deployment, check with your parent zone
+administrators to make sure they support DNSSEC. This may or may not be
+the same entity as your registrar. As you will see later in
+:ref:`working_with_parent_zone`, a crucial step in DNSSEC deployment
+is establishing the parent-child trust relationship. If your parent zone
+does not yet support DNSSEC, contact that administrator to voice your concerns.
+
+.. _security_requirements:
+
+Security Requirements
+^^^^^^^^^^^^^^^^^^^^^
+
+Some organizations may be subject to stricter security requirements than
+others. Check to see if your organization requires stronger
+cryptographic keys be generated and stored, and how often keys need to be
+rotated. The examples presented in this document are not intended for
+high-value zones. We cover some of these security considerations in
+:ref:`dnssec_advanced_discussions`.