Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 1175 insertions, 0 deletions

diff --git a/basegfx/source/curve/b2dbeziertools.cxx b/basegfx/source/curve/b2dbeziertools.cxx
new file mode 100644
index 000000000..c24ba4215
--- /dev/null
+++ b/basegfx/source/curve/b2dbeziertools.cxx
@@ -0,0 +1,118 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <basegfx/curve/b2dbeziertools.hxx>
+#include <basegfx/curve/b2dcubicbezier.hxx>
+#include <algorithm>
+
+namespace basegfx
+{
+    B2DCubicBezierHelper::B2DCubicBezierHelper(const B2DCubicBezier& rBase, sal_uInt32 nDivisions)
+    :   maLengthArray(),
+        mnEdgeCount(0)
+    {
+        const bool bIsBezier(rBase.isBezier());
+
+        if(bIsBezier)
+        {
+            // check nDivisions; at least one is needed, but also prevent too big values
+            if(nDivisions < 1)
+            {
+                nDivisions = 1;
+            }
+            else if(nDivisions > 1000)
+            {
+                nDivisions = 1000;
+            }
+
+            // set nEdgeCount
+            mnEdgeCount = nDivisions + 1;
+
+            // fill in maLengthArray
+            maLengthArray.clear();
+            maLengthArray.reserve(mnEdgeCount);
+            B2DPoint aCurrent(rBase.getStartPoint());
+            double fLength(0.0);
+
+            for(sal_uInt32 a(1);;)
+            {
+                const B2DPoint aNext(rBase.interpolatePoint(static_cast<double>(a) / static_cast<double>(mnEdgeCount)));
+                const B2DVector aEdge(aNext - aCurrent);
+
+                fLength += aEdge.getLength();
+                maLengthArray.push_back(fLength);
+
+                if(++a < mnEdgeCount)
+                {
+                    aCurrent = aNext;
+                }
+                else
+                {
+                    const B2DPoint& aLastNext(rBase.getEndPoint());
+                    const B2DVector aLastEdge(aLastNext - aNext);
+
+                    fLength += aLastEdge.getLength();
+                    maLengthArray.push_back(fLength);
+                    break;
+                }
+            }
+        }
+        else
+        {
+            maLengthArray.clear();
+            maLengthArray.push_back(rBase.getEdgeLength());
+            mnEdgeCount = 1;
+        }
+    }
+
+    double B2DCubicBezierHelper::distanceToRelative(double fDistance) const
+    {
+        if(fDistance <= 0.0)
+        {
+            return 0.0;
+        }
+
+        const double fLength(getLength());
+
+        if(fTools::moreOrEqual(fDistance, fLength))
+        {
+            return 1.0;
+        }
+
+        // fDistance is in ]0.0 .. fLength[
+
+        if(mnEdgeCount == 1)
+        {
+            // not a bezier, linear edge
+            return fDistance / fLength;
+        }
+
+        // it is a bezier
+        std::vector< double >::const_iterator aIter = std::lower_bound(maLengthArray.begin(), maLengthArray.end(), fDistance);
+        const sal_uInt32 nIndex(aIter - maLengthArray.begin());
+        const double fHighBound(maLengthArray[nIndex]);
+        const double fLowBound(nIndex ?  maLengthArray[nIndex - 1] : 0.0);
+        const double fLinearInterpolatedLength((fDistance - fLowBound) / (fHighBound - fLowBound));
+
+        return (static_cast< double >(nIndex) + fLinearInterpolatedLength) / static_cast< double >(mnEdgeCount);
+    }
+
+} // end of namespace basegfx
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/basegfx/source/curve/b2dcubicbezier.cxx b/basegfx/source/curve/b2dcubicbezier.cxx
new file mode 100644
index 000000000..4fd2e33fe
--- /dev/null
+++ b/basegfx/source/curve/b2dcubicbezier.cxx
@@ -0,0 +1,1057 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <basegfx/curve/b2dcubicbezier.hxx>
+#include <basegfx/vector/b2dvector.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/numeric/ftools.hxx>
+
+#include <osl/diagnose.h>
+
+#include <limits>
+
+// #i37443#
+#define FACTOR_FOR_UNSHARPEN    (1.6)
+#ifdef DBG_UTIL
+static const double fMultFactUnsharpen = FACTOR_FOR_UNSHARPEN;
+#endif
+
+namespace basegfx
+{
+    namespace
+    {
+        void ImpSubDivAngle(
+            const B2DPoint& rfPA,           // start point
+            const B2DPoint& rfEA,           // edge on A
+            const B2DPoint& rfEB,           // edge on B
+            const B2DPoint& rfPB,           // end point
+            B2DPolygon& rTarget,            // target polygon
+            double fAngleBound,             // angle bound in [0.0 .. 2PI]
+            bool bAllowUnsharpen,           // #i37443# allow the criteria to get unsharp in recursions
+            sal_uInt16 nMaxRecursionDepth)  // endless loop protection
+        {
+            if(nMaxRecursionDepth)
+            {
+                // do angle test
+                B2DVector aLeft(rfEA - rfPA);
+                B2DVector aRight(rfEB - rfPB);
+
+                // #i72104#
+                if(aLeft.equalZero())
+                {
+                    aLeft = rfEB - rfPA;
+                }
+
+                if(aRight.equalZero())
+                {
+                    aRight = rfEA - rfPB;
+                }
+
+                const double fCurrentAngle(aLeft.angle(aRight));
+
+                if(fabs(fCurrentAngle) > (F_PI - fAngleBound))
+                {
+                    // end recursion
+                    nMaxRecursionDepth = 0;
+                }
+                else
+                {
+                    if(bAllowUnsharpen)
+                    {
+                        // #i37443# unsharpen criteria
+#ifdef DBG_UTIL
+                        fAngleBound *= fMultFactUnsharpen;
+#else
+                        fAngleBound *= FACTOR_FOR_UNSHARPEN;
+#endif
+                    }
+                }
+            }
+
+            if(nMaxRecursionDepth)
+            {
+                // divide at 0.5
+                const B2DPoint aS1L(average(rfPA, rfEA));
+                const B2DPoint aS1C(average(rfEA, rfEB));
+                const B2DPoint aS1R(average(rfEB, rfPB));
+                const B2DPoint aS2L(average(aS1L, aS1C));
+                const B2DPoint aS2R(average(aS1C, aS1R));
+                const B2DPoint aS3C(average(aS2L, aS2R));
+
+                // left recursion
+                ImpSubDivAngle(rfPA, aS1L, aS2L, aS3C, rTarget, fAngleBound, bAllowUnsharpen, nMaxRecursionDepth - 1);
+
+                // right recursion
+                ImpSubDivAngle(aS3C, aS2R, aS1R, rfPB, rTarget, fAngleBound, bAllowUnsharpen, nMaxRecursionDepth - 1);
+            }
+            else
+            {
+                rTarget.append(rfPB);
+            }
+        }
+
+        void ImpSubDivAngleStart(
+            const B2DPoint& rfPA,           // start point
+            const B2DPoint& rfEA,           // edge on A
+            const B2DPoint& rfEB,           // edge on B
+            const B2DPoint& rfPB,           // end point
+            B2DPolygon& rTarget,            // target polygon
+            const double& rfAngleBound)     // angle bound in [0.0 .. 2PI]
+        {
+            sal_uInt16 nMaxRecursionDepth(8);
+            const B2DVector aLeft(rfEA - rfPA);
+            const B2DVector aRight(rfEB - rfPB);
+            bool bLeftEqualZero(aLeft.equalZero());
+            bool bRightEqualZero(aRight.equalZero());
+            bool bAllParallel(false);
+
+            if(bLeftEqualZero && bRightEqualZero)
+            {
+                nMaxRecursionDepth = 0;
+            }
+            else
+            {
+                const B2DVector aBase(rfPB - rfPA);
+                const bool bBaseEqualZero(aBase.equalZero()); // #i72104#
+
+                if(!bBaseEqualZero)
+                {
+                    const bool bLeftParallel(bLeftEqualZero || areParallel(aLeft, aBase));
+                    const bool bRightParallel(bRightEqualZero || areParallel(aRight, aBase));
+
+                    if(bLeftParallel && bRightParallel)
+                    {
+                        bAllParallel = true;
+
+                        if(!bLeftEqualZero)
+                        {
+                            double fFactor;
+
+                            if(fabs(aBase.getX()) > fabs(aBase.getY()))
+                            {
+                                fFactor = aLeft.getX() / aBase.getX();
+                            }
+                            else
+                            {
+                                fFactor = aLeft.getY() / aBase.getY();
+                            }
+
+                            if(fFactor >= 0.0 && fFactor <= 1.0)
+                            {
+                                bLeftEqualZero = true;
+                            }
+                        }
+
+                        if(!bRightEqualZero)
+                        {
+                            double fFactor;
+
+                            if(fabs(aBase.getX()) > fabs(aBase.getY()))
+                            {
+                                fFactor = aRight.getX() / -aBase.getX();
+                            }
+                            else
+                            {
+                                fFactor = aRight.getY() / -aBase.getY();
+                            }
+
+                            if(fFactor >= 0.0 && fFactor <= 1.0)
+                            {
+                                bRightEqualZero = true;
+                            }
+                        }
+
+                        if(bLeftEqualZero && bRightEqualZero)
+                        {
+                            nMaxRecursionDepth = 0;
+                        }
+                    }
+                }
+            }
+
+            if(nMaxRecursionDepth)
+            {
+                // divide at 0.5 ad test both edges for angle criteria
+                const B2DPoint aS1L(average(rfPA, rfEA));
+                const B2DPoint aS1C(average(rfEA, rfEB));
+                const B2DPoint aS1R(average(rfEB, rfPB));
+                const B2DPoint aS2L(average(aS1L, aS1C));
+                const B2DPoint aS2R(average(aS1C, aS1R));
+                const B2DPoint aS3C(average(aS2L, aS2R));
+
+                // test left
+                bool bAngleIsSmallerLeft(bAllParallel && bLeftEqualZero);
+                if(!bAngleIsSmallerLeft)
+                {
+                    const B2DVector aLeftLeft(bLeftEqualZero ? aS2L - aS1L : aS1L - rfPA); // #i72104#
+                    const B2DVector aRightLeft(aS2L - aS3C);
+                    const double fCurrentAngleLeft(aLeftLeft.angle(aRightLeft));
+                    bAngleIsSmallerLeft = (fabs(fCurrentAngleLeft) > (F_PI - rfAngleBound));
+                }
+
+                // test right
+                bool bAngleIsSmallerRight(bAllParallel && bRightEqualZero);
+                if(!bAngleIsSmallerRight)
+                {
+                    const B2DVector aLeftRight(aS2R - aS3C);
+                    const B2DVector aRightRight(bRightEqualZero ? aS2R - aS1R : aS1R - rfPB); // #i72104#
+                    const double fCurrentAngleRight(aLeftRight.angle(aRightRight));
+                    bAngleIsSmallerRight = (fabs(fCurrentAngleRight) > (F_PI - rfAngleBound));
+                }
+
+                if(bAngleIsSmallerLeft && bAngleIsSmallerRight)
+                {
+                    // no recursion necessary at all
+                    nMaxRecursionDepth = 0;
+                }
+                else
+                {
+                    // left
+                    if(bAngleIsSmallerLeft)
+                    {
+                        rTarget.append(aS3C);
+                    }
+                    else
+                    {
+                        ImpSubDivAngle(rfPA, aS1L, aS2L, aS3C, rTarget, rfAngleBound, true/*bAllowUnsharpen*/, nMaxRecursionDepth);
+                    }
+
+                    // right
+                    if(bAngleIsSmallerRight)
+                    {
+                        rTarget.append(rfPB);
+                    }
+                    else
+                    {
+                        ImpSubDivAngle(aS3C, aS2R, aS1R, rfPB, rTarget, rfAngleBound, true/*bAllowUnsharpen*/, nMaxRecursionDepth);
+                    }
+                }
+            }
+
+            if(!nMaxRecursionDepth)
+            {
+                rTarget.append(rfPB);
+            }
+        }
+
+        void ImpSubDivDistance(
+            const B2DPoint& rfPA,           // start point
+            const B2DPoint& rfEA,           // edge on A
+            const B2DPoint& rfEB,           // edge on B
+            const B2DPoint& rfPB,           // end point
+            B2DPolygon& rTarget,            // target polygon
+            double fDistanceBound2,         // quadratic distance criteria
+            double fLastDistanceError2,     // the last quadratic distance error
+            sal_uInt16 nMaxRecursionDepth)  // endless loop protection
+        {
+            if(nMaxRecursionDepth)
+            {
+                // decide if another recursion is needed. If not, set
+                // nMaxRecursionDepth to zero
+
+                // Perform bezier flatness test (lecture notes from R. Schaback,
+                // Mathematics of Computer-Aided Design, Uni Goettingen, 2000)
+
+                // ||P(t) - L(t)|| <= max     ||b_j - b_0 - j/n(b_n - b_0)||
+                //                    0<=j<=n
+
+                // What is calculated here is an upper bound to the distance from
+                // a line through b_0 and b_3 (rfPA and P4 in our notation) and the
+                // curve. We can drop 0 and n from the running indices, since the
+                // argument of max becomes zero for those cases.
+                const double fJ1x(rfEA.getX() - rfPA.getX() - 1.0/3.0*(rfPB.getX() - rfPA.getX()));
+                const double fJ1y(rfEA.getY() - rfPA.getY() - 1.0/3.0*(rfPB.getY() - rfPA.getY()));
+                const double fJ2x(rfEB.getX() - rfPA.getX() - 2.0/3.0*(rfPB.getX() - rfPA.getX()));
+                const double fJ2y(rfEB.getY() - rfPA.getY() - 2.0/3.0*(rfPB.getY() - rfPA.getY()));
+                const double fDistanceError2(std::max(fJ1x*fJ1x + fJ1y*fJ1y, fJ2x*fJ2x + fJ2y*fJ2y));
+
+                // stop if error measure does not improve anymore. This is a
+                // safety guard against floating point inaccuracies.
+                // stop if distance from line is guaranteed to be bounded by d
+                const bool bFurtherDivision(fLastDistanceError2 > fDistanceError2 && fDistanceError2 >= fDistanceBound2);
+
+                if(bFurtherDivision)
+                {
+                    // remember last error value
+                    fLastDistanceError2 = fDistanceError2;
+                }
+                else
+                {
+                    // stop recursion
+                    nMaxRecursionDepth = 0;
+                }
+            }
+
+            if(nMaxRecursionDepth)
+            {
+                // divide at 0.5
+                const B2DPoint aS1L(average(rfPA, rfEA));
+                const B2DPoint aS1C(average(rfEA, rfEB));
+                const B2DPoint aS1R(average(rfEB, rfPB));
+                const B2DPoint aS2L(average(aS1L, aS1C));
+                const B2DPoint aS2R(average(aS1C, aS1R));
+                const B2DPoint aS3C(average(aS2L, aS2R));
+
+                // left recursion
+                ImpSubDivDistance(rfPA, aS1L, aS2L, aS3C, rTarget, fDistanceBound2, fLastDistanceError2, nMaxRecursionDepth - 1);
+
+                // right recursion
+                ImpSubDivDistance(aS3C, aS2R, aS1R, rfPB, rTarget, fDistanceBound2, fLastDistanceError2, nMaxRecursionDepth - 1);
+            }
+            else
+            {
+                rTarget.append(rfPB);
+            }
+        }
+    } // end of anonymous namespace
+} // end of namespace basegfx
+
+namespace basegfx
+{
+    B2DCubicBezier::B2DCubicBezier(const B2DCubicBezier&) = default;
+
+    B2DCubicBezier::B2DCubicBezier() = default;
+
+    B2DCubicBezier::B2DCubicBezier(const B2DPoint& rStart, const B2DPoint& rControlPointA, const B2DPoint& rControlPointB, const B2DPoint& rEnd)
+    :   maStartPoint(rStart),
+        maEndPoint(rEnd),
+        maControlPointA(rControlPointA),
+        maControlPointB(rControlPointB)
+    {
+    }
+
+    B2DCubicBezier::~B2DCubicBezier() = default;
+
+    // assignment operator
+    B2DCubicBezier& B2DCubicBezier::operator=(const B2DCubicBezier&) = default;
+
+    // compare operators
+    bool B2DCubicBezier::operator==(const B2DCubicBezier& rBezier) const
+    {
+        return (
+            maStartPoint == rBezier.maStartPoint
+            && maEndPoint == rBezier.maEndPoint
+            && maControlPointA == rBezier.maControlPointA
+            && maControlPointB == rBezier.maControlPointB
+        );
+    }
+
+    bool B2DCubicBezier::operator!=(const B2DCubicBezier& rBezier) const
+    {
+        return (
+            maStartPoint != rBezier.maStartPoint
+            || maEndPoint != rBezier.maEndPoint
+            || maControlPointA != rBezier.maControlPointA
+            || maControlPointB != rBezier.maControlPointB
+        );
+    }
+
+    bool B2DCubicBezier::equal(const B2DCubicBezier& rBezier) const
+    {
+        return (
+            maStartPoint.equal(rBezier.maStartPoint)
+            && maEndPoint.equal(rBezier.maEndPoint)
+            && maControlPointA.equal(rBezier.maControlPointA)
+            && maControlPointB.equal(rBezier.maControlPointB)
+        );
+    }
+
+    // test if vectors are used
+    bool B2DCubicBezier::isBezier() const
+    {
+        return maControlPointA != maStartPoint || maControlPointB != maEndPoint;
+    }
+
+    void B2DCubicBezier::testAndSolveTrivialBezier()
+    {
+        if(maControlPointA == maStartPoint && maControlPointB == maEndPoint)
+            return;
+
+        const B2DVector aEdge(maEndPoint - maStartPoint);
+
+        // controls parallel to edge can be trivial. No edge -> not parallel -> control can
+        // still not be trivial (e.g. ballon loop)
+        if(aEdge.equalZero())
+            return;
+
+        // get control vectors
+        const B2DVector aVecA(maControlPointA - maStartPoint);
+        const B2DVector aVecB(maControlPointB - maEndPoint);
+
+        // check if trivial per se
+        bool bAIsTrivial(aVecA.equalZero());
+        bool bBIsTrivial(aVecB.equalZero());
+
+        // #i102241# prepare inverse edge length to normalize cross values;
+        // else the small compare value used in fTools::equalZero
+        // will be length dependent and this detection will work as less
+        // precise as longer the edge is. In principle, the length of the control
+        // vector would need to be used too, but to be trivial it is assumed to
+        // be of roughly equal length to the edge, so edge length can be used
+        // for both. Only needed when one of both is not trivial per se.
+        const double fInverseEdgeLength(bAIsTrivial && bBIsTrivial
+            ? 1.0
+            : 1.0 / aEdge.getLength());
+
+        // if A is not zero, check if it could be
+        if(!bAIsTrivial)
+        {
+            // #i102241# parallel to edge? Check aVecA, aEdge. Use cross() which does what
+            // we need here with the precision we need
+            const double fCross(aVecA.cross(aEdge) * fInverseEdgeLength);
+
+            if(fTools::equalZero(fCross))
+            {
+                // get scale to edge. Use bigger distance for numeric quality
+                const double fScale(fabs(aEdge.getX()) > fabs(aEdge.getY())
+                    ? aVecA.getX() / aEdge.getX()
+                    : aVecA.getY() / aEdge.getY());
+
+                // relative end point of vector in edge range?
+                if (fTools::betweenOrEqualEither(fScale, 0.0, 1.0))
+                {
+                    bAIsTrivial = true;
+                }
+            }
+        }
+
+        // if B is not zero, check if it could be, but only if A is already trivial;
+        // else solve to trivial will not be possible for whole edge
+        if(bAIsTrivial && !bBIsTrivial)
+        {
+            // parallel to edge? Check aVecB, aEdge
+            const double fCross(aVecB.cross(aEdge) * fInverseEdgeLength);
+
+            if(fTools::equalZero(fCross))
+            {
+                // get scale to edge. Use bigger distance for numeric quality
+                const double fScale(fabs(aEdge.getX()) > fabs(aEdge.getY())
+                    ? aVecB.getX() / aEdge.getX()
+                    : aVecB.getY() / aEdge.getY());
+
+                // end point of vector in edge range? Caution: controlB is directed AGAINST edge
+                if (fTools::betweenOrEqualEither(fScale, -1.0, 0.0))
+                {
+                    bBIsTrivial = true;
+                }
+            }
+        }
+
+        // if both are/can be reduced, do it.
+        // Not possible if only one is/can be reduced (!)
+        if(bAIsTrivial && bBIsTrivial)
+        {
+            maControlPointA = maStartPoint;
+            maControlPointB = maEndPoint;
+        }
+    }
+
+    namespace {
+        double impGetLength(const B2DCubicBezier& rEdge, double fDeviation, sal_uInt32 nRecursionWatch)
+        {
+            const double fEdgeLength(rEdge.getEdgeLength());
+            const double fControlPolygonLength(rEdge.getControlPolygonLength());
+            const double fCurrentDeviation(fTools::equalZero(fControlPolygonLength) ? 0.0 : 1.0 - (fEdgeLength / fControlPolygonLength));
+
+            if(!nRecursionWatch || fTools:: lessOrEqual(fCurrentDeviation, fDeviation))
+            {
+                return (fEdgeLength + fControlPolygonLength) * 0.5;
+            }
+            else
+            {
+                B2DCubicBezier aLeft, aRight;
+                const double fNewDeviation(fDeviation * 0.5);
+                const sal_uInt32 nNewRecursionWatch(nRecursionWatch - 1);
+
+                rEdge.split(0.5, &aLeft, &aRight);
+
+                return impGetLength(aLeft, fNewDeviation, nNewRecursionWatch)
+                    + impGetLength(aRight, fNewDeviation, nNewRecursionWatch);
+            }
+        }
+    }
+
+    double B2DCubicBezier::getLength(double fDeviation) const
+    {
+        if(isBezier())
+        {
+            if(fDeviation < 0.00000001)
+            {
+                fDeviation = 0.00000001;
+            }
+
+            return impGetLength(*this, fDeviation, 6);
+        }
+        else
+        {
+            return B2DVector(getEndPoint() - getStartPoint()).getLength();
+        }
+    }
+
+    double B2DCubicBezier::getEdgeLength() const
+    {
+        const B2DVector aEdge(maEndPoint - maStartPoint);
+        return aEdge.getLength();
+    }
+
+    double B2DCubicBezier::getControlPolygonLength() const
+    {
+        const B2DVector aVectorA(maControlPointA - maStartPoint);
+        const B2DVector aVectorB(maEndPoint - maControlPointB);
+
+        if(!aVectorA.equalZero() || !aVectorB.equalZero())
+        {
+            const B2DVector aTop(maControlPointB - maControlPointA);
+            return (aVectorA.getLength() + aVectorB.getLength() + aTop.getLength());
+        }
+        else
+        {
+            return getEdgeLength();
+        }
+    }
+
+    void B2DCubicBezier::adaptiveSubdivideByAngle(B2DPolygon& rTarget, double fAngleBound) const
+    {
+        if(isBezier())
+        {
+            // use support method #i37443# and allow unsharpen the criteria
+            ImpSubDivAngleStart(maStartPoint, maControlPointA, maControlPointB, maEndPoint, rTarget,
+                                deg2rad(fAngleBound));
+        }
+        else
+        {
+            rTarget.append(getEndPoint());
+        }
+    }
+
+    B2DVector B2DCubicBezier::getTangent(double t) const
+    {
+        if(fTools::lessOrEqual(t, 0.0))
+        {
+            // tangent in start point
+            B2DVector aTangent(getControlPointA() - getStartPoint());
+
+            if(!aTangent.equalZero())
+            {
+                return aTangent;
+            }
+
+            // start point and control vector are the same, fallback
+            // to implicit start vector to control point B
+            aTangent = (getControlPointB() - getStartPoint()) * 0.3;
+
+            if(!aTangent.equalZero())
+            {
+                return aTangent;
+            }
+
+            // not a bezier at all, return edge vector
+            return (getEndPoint() - getStartPoint()) * 0.3;
+        }
+        else if(fTools::moreOrEqual(t, 1.0))
+        {
+            // tangent in end point
+            B2DVector aTangent(getEndPoint() - getControlPointB());
+
+            if(!aTangent.equalZero())
+            {
+                return aTangent;
+            }
+
+            // end point and control vector are the same, fallback
+            // to implicit start vector from control point A
+            aTangent = (getEndPoint() - getControlPointA()) * 0.3;
+
+            if(!aTangent.equalZero())
+            {
+                return aTangent;
+            }
+
+            // not a bezier at all, return edge vector
+            return (getEndPoint() - getStartPoint()) * 0.3;
+        }
+        else
+        {
+            // t is in ]0.0 .. 1.0[. Split and extract
+            B2DCubicBezier aRight;
+            split(t, nullptr, &aRight);
+
+            return aRight.getControlPointA() - aRight.getStartPoint();
+        }
+    }
+
+    // #i37443# adaptive subdivide by nCount subdivisions
+    void B2DCubicBezier::adaptiveSubdivideByCount(B2DPolygon& rTarget, sal_uInt32 nCount) const
+    {
+        const double fLenFact(1.0 / static_cast< double >(nCount + 1));
+
+        for(sal_uInt32 a(1); a <= nCount; a++)
+        {
+            const double fPos(static_cast< double >(a) * fLenFact);
+            rTarget.append(interpolatePoint(fPos));
+        }
+
+        rTarget.append(getEndPoint());
+    }
+
+    // adaptive subdivide by distance
+    void B2DCubicBezier::adaptiveSubdivideByDistance(B2DPolygon& rTarget, double fDistanceBound) const
+    {
+        if(isBezier())
+        {
+            ImpSubDivDistance(maStartPoint, maControlPointA, maControlPointB, maEndPoint, rTarget,
+                fDistanceBound * fDistanceBound, std::numeric_limits<double>::max(), 30);
+        }
+        else
+        {
+            rTarget.append(getEndPoint());
+        }
+    }
+
+    B2DPoint B2DCubicBezier::interpolatePoint(double t) const
+    {
+        OSL_ENSURE(t >= 0.0 && t <= 1.0, "B2DCubicBezier::interpolatePoint: Access out of range (!)");
+
+        if(isBezier())
+        {
+            const B2DPoint aS1L(interpolate(maStartPoint, maControlPointA, t));
+            const B2DPoint aS1C(interpolate(maControlPointA, maControlPointB, t));
+            const B2DPoint aS1R(interpolate(maControlPointB, maEndPoint, t));
+            const B2DPoint aS2L(interpolate(aS1L, aS1C, t));
+            const B2DPoint aS2R(interpolate(aS1C, aS1R, t));
+
+            return interpolate(aS2L, aS2R, t);
+        }
+        else
+        {
+            return interpolate(maStartPoint, maEndPoint, t);
+        }
+    }
+
+    double B2DCubicBezier::getSmallestDistancePointToBezierSegment(const B2DPoint& rTestPoint, double& rCut) const
+    {
+        const sal_uInt32 nInitialDivisions(3);
+        B2DPolygon aInitialPolygon;
+
+        // as start make a fix division, creates nInitialDivisions + 2 points
+        aInitialPolygon.append(getStartPoint());
+        adaptiveSubdivideByCount(aInitialPolygon, nInitialDivisions);
+
+        // now look for the closest point
+        const sal_uInt32 nPointCount(aInitialPolygon.count());
+        B2DVector aVector(rTestPoint - aInitialPolygon.getB2DPoint(0));
+        double fQuadDist(aVector.getX() * aVector.getX() + aVector.getY() * aVector.getY());
+        double fNewQuadDist;
+        sal_uInt32 nSmallestIndex(0);
+
+        for(sal_uInt32 a(1); a < nPointCount; a++)
+        {
+            aVector = B2DVector(rTestPoint - aInitialPolygon.getB2DPoint(a));
+            fNewQuadDist = aVector.getX() * aVector.getX() + aVector.getY() * aVector.getY();
+
+            if(fNewQuadDist < fQuadDist)
+            {
+                fQuadDist = fNewQuadDist;
+                nSmallestIndex = a;
+            }
+        }
+
+        // look right and left for even smaller distances
+        double fStepValue(1.0 / static_cast<double>((nPointCount - 1) * 2)); // half the edge step width
+        double fPosition(static_cast<double>(nSmallestIndex) / static_cast<double>(nPointCount - 1));
+
+        while(true)
+        {
+            // test left
+            double fPosLeft(fPosition - fStepValue);
+
+            if(fPosLeft < 0.0)
+            {
+                fPosLeft = 0.0;
+                aVector = B2DVector(rTestPoint - maStartPoint);
+            }
+            else
+            {
+                aVector = B2DVector(rTestPoint - interpolatePoint(fPosLeft));
+            }
+
+            fNewQuadDist = aVector.getX() * aVector.getX() + aVector.getY() * aVector.getY();
+
+            if(fTools::less(fNewQuadDist, fQuadDist))
+            {
+                fQuadDist = fNewQuadDist;
+                fPosition = fPosLeft;
+            }
+            else
+            {
+                // test right
+                double fPosRight(fPosition + fStepValue);
+
+                if(fPosRight > 1.0)
+                {
+                    fPosRight = 1.0;
+                    aVector = B2DVector(rTestPoint - maEndPoint);
+                }
+                else
+                {
+                    aVector = B2DVector(rTestPoint - interpolatePoint(fPosRight));
+                }
+
+                fNewQuadDist = aVector.getX() * aVector.getX() + aVector.getY() * aVector.getY();
+
+                if(fTools::less(fNewQuadDist, fQuadDist))
+                {
+                    fQuadDist = fNewQuadDist;
+                    fPosition = fPosRight;
+                }
+                else
+                {
+                    // not less left or right, done
+                    break;
+                }
+            }
+
+            if(fPosition == 0.0 || fPosition == 1.0)
+            {
+                // if we are completely left or right, we are done
+                break;
+            }
+
+            // prepare next step value
+            fStepValue /= 2.0;
+        }
+
+        rCut = fPosition;
+        return sqrt(fQuadDist);
+    }
+
+    void B2DCubicBezier::split(double t, B2DCubicBezier* pBezierA, B2DCubicBezier* pBezierB) const
+    {
+        OSL_ENSURE(t >= 0.0 && t <= 1.0, "B2DCubicBezier::split: Access out of range (!)");
+
+        if(!pBezierA && !pBezierB)
+        {
+            return;
+        }
+
+        if(isBezier())
+        {
+            const B2DPoint aS1L(interpolate(maStartPoint, maControlPointA, t));
+            const B2DPoint aS1C(interpolate(maControlPointA, maControlPointB, t));
+            const B2DPoint aS1R(interpolate(maControlPointB, maEndPoint, t));
+            const B2DPoint aS2L(interpolate(aS1L, aS1C, t));
+            const B2DPoint aS2R(interpolate(aS1C, aS1R, t));
+            const B2DPoint aS3C(interpolate(aS2L, aS2R, t));
+
+            if(pBezierA)
+            {
+                pBezierA->setStartPoint(maStartPoint);
+                pBezierA->setEndPoint(aS3C);
+                pBezierA->setControlPointA(aS1L);
+                pBezierA->setControlPointB(aS2L);
+            }
+
+            if(pBezierB)
+            {
+                pBezierB->setStartPoint(aS3C);
+                pBezierB->setEndPoint(maEndPoint);
+                pBezierB->setControlPointA(aS2R);
+                pBezierB->setControlPointB(aS1R);
+            }
+        }
+        else
+        {
+            const B2DPoint aSplit(interpolate(maStartPoint, maEndPoint, t));
+
+            if(pBezierA)
+            {
+                pBezierA->setStartPoint(maStartPoint);
+                pBezierA->setEndPoint(aSplit);
+                pBezierA->setControlPointA(maStartPoint);
+                pBezierA->setControlPointB(aSplit);
+            }
+
+            if(pBezierB)
+            {
+                pBezierB->setStartPoint(aSplit);
+                pBezierB->setEndPoint(maEndPoint);
+                pBezierB->setControlPointA(aSplit);
+                pBezierB->setControlPointB(maEndPoint);
+            }
+        }
+    }
+
+    B2DCubicBezier B2DCubicBezier::snippet(double fStart, double fEnd) const
+    {
+        B2DCubicBezier aRetval;
+
+        if(fTools::more(fStart, 1.0))
+        {
+            fStart = 1.0;
+        }
+        else if(fTools::less(fStart, 0.0))
+        {
+            fStart = 0.0;
+        }
+
+        if(fTools::more(fEnd, 1.0))
+        {
+            fEnd = 1.0;
+        }
+        else if(fTools::less(fEnd, 0.0))
+        {
+            fEnd = 0.0;
+        }
+
+        if(fEnd <= fStart)
+        {
+            // empty or NULL, create single point at center
+            const double fSplit((fEnd + fStart) * 0.5);
+            const B2DPoint aPoint(interpolate(getStartPoint(), getEndPoint(), fSplit));
+            aRetval.setStartPoint(aPoint);
+            aRetval.setEndPoint(aPoint);
+            aRetval.setControlPointA(aPoint);
+            aRetval.setControlPointB(aPoint);
+        }
+        else
+        {
+            if(isBezier())
+            {
+                // copy bezier; cut off right, then cut off left. Do not forget to
+                // adapt cut value when both cuts happen
+                const bool bEndIsOne(fTools::equal(fEnd, 1.0));
+                const bool bStartIsZero(fTools::equalZero(fStart));
+                aRetval = *this;
+
+                if(!bEndIsOne)
+                {
+                    aRetval.split(fEnd, &aRetval, nullptr);
+
+                    if(!bStartIsZero)
+                    {
+                        fStart /= fEnd;
+                    }
+                }
+
+                if(!bStartIsZero)
+                {
+                    aRetval.split(fStart, nullptr, &aRetval);
+                }
+            }
+            else
+            {
+                // no bezier, create simple edge
+                const B2DPoint aPointA(interpolate(getStartPoint(), getEndPoint(), fStart));
+                const B2DPoint aPointB(interpolate(getStartPoint(), getEndPoint(), fEnd));
+                aRetval.setStartPoint(aPointA);
+                aRetval.setEndPoint(aPointB);
+                aRetval.setControlPointA(aPointA);
+                aRetval.setControlPointB(aPointB);
+            }
+        }
+
+        return aRetval;
+    }
+
+    B2DRange B2DCubicBezier::getRange() const
+    {
+        B2DRange aRetval(maStartPoint, maEndPoint);
+
+        aRetval.expand(maControlPointA);
+        aRetval.expand(maControlPointB);
+
+        return aRetval;
+    }
+
+    bool B2DCubicBezier::getMinimumExtremumPosition(double& rfResult) const
+    {
+        std::vector< double > aAllResults;
+
+        aAllResults.reserve(4);
+        getAllExtremumPositions(aAllResults);
+
+        const sal_uInt32 nCount(aAllResults.size());
+
+        if(!nCount)
+        {
+            return false;
+        }
+        else if(nCount == 1)
+        {
+            rfResult = aAllResults[0];
+            return true;
+        }
+        else
+        {
+            rfResult = *(std::min_element(aAllResults.begin(), aAllResults.end()));
+            return true;
+        }
+    }
+
+    namespace
+    {
+        void impCheckExtremumResult(double fCandidate, std::vector< double >& rResult)
+        {
+            // check for range ]0.0 .. 1.0[ with excluding 1.0 and 0.0 clearly
+            // by using the equalZero test, NOT ::more or ::less which will use the
+            // ApproxEqual() which is too exact here
+            if(fCandidate > 0.0 && !fTools::equalZero(fCandidate))
+            {
+                if(fCandidate < 1.0 && !fTools::equalZero(fCandidate - 1.0))
+                {
+                    rResult.push_back(fCandidate);
+                }
+            }
+        }
+    }
+
+    void B2DCubicBezier::getAllExtremumPositions(std::vector< double >& rResults) const
+    {
+        rResults.clear();
+
+        // calculate the x-extrema parameters by zeroing first x-derivative
+        // of the cubic bezier's parametric formula, which results in a
+        // quadratic equation: dBezier/dt = t*t*fAX - 2*t*fBX + fCX
+        const B2DPoint aControlDiff( maControlPointA - maControlPointB );
+        double fCX = maControlPointA.getX() - maStartPoint.getX();
+        const double fBX = fCX + aControlDiff.getX();
+        const double fAX = 3 * aControlDiff.getX() + (maEndPoint.getX() - maStartPoint.getX());
+
+        if(fTools::equalZero(fCX))
+        {
+            // detect fCX equal zero and truncate to real zero value in that case
+            fCX = 0.0;
+        }
+
+        if( !fTools::equalZero(fAX) )
+        {
+            // derivative is polynomial of order 2 => use binomial formula
+            const double fD = fBX*fBX - fAX*fCX;
+            if( fD >= 0.0 )
+            {
+                const double fS = sqrt(fD);
+                // calculate both roots (avoiding a numerically unstable subtraction)
+                const double fQ = fBX + ((fBX >= 0) ? +fS : -fS);
+                impCheckExtremumResult(fQ / fAX, rResults);
+                if( !fTools::equalZero(fS) ) // ignore root multiplicity
+                    impCheckExtremumResult(fCX / fQ, rResults);
+            }
+        }
+        else if( !fTools::equalZero(fBX) )
+        {
+            // derivative is polynomial of order 1 => one extrema
+            impCheckExtremumResult(fCX / (2 * fBX), rResults);
+        }
+
+        // calculate the y-extrema parameters by zeroing first y-derivative
+        double fCY = maControlPointA.getY() - maStartPoint.getY();
+        const double fBY = fCY + aControlDiff.getY();
+        const double fAY = 3 * aControlDiff.getY() + (maEndPoint.getY() - maStartPoint.getY());
+
+        if(fTools::equalZero(fCY))
+        {
+            // detect fCY equal zero and truncate to real zero value in that case
+            fCY = 0.0;
+        }
+
+        if( !fTools::equalZero(fAY) )
+        {
+            // derivative is polynomial of order 2 => use binomial formula
+            const double fD = fBY*fBY - fAY*fCY;
+            if( fD >= 0.0 )
+            {
+                const double fS = sqrt(fD);
+                // calculate both roots (avoiding a numerically unstable subtraction)
+                const double fQ = fBY + ((fBY >= 0) ? +fS : -fS);
+                impCheckExtremumResult(fQ / fAY, rResults);
+                if( !fTools::equalZero(fS) ) // ignore root multiplicity
+                    impCheckExtremumResult(fCY / fQ, rResults);
+            }
+        }
+        else if( !fTools::equalZero(fBY) )
+        {
+            // derivative is polynomial of order 1 => one extrema
+            impCheckExtremumResult(fCY / (2 * fBY), rResults);
+        }
+    }
+
+    void B2DCubicBezier::transform(const basegfx::B2DHomMatrix& rMatrix)
+    {
+        if(rMatrix.isIdentity())
+            return;
+
+        if(maControlPointA == maStartPoint)
+        {
+            maControlPointA = maStartPoint = rMatrix * maStartPoint;
+        }
+        else
+        {
+            maStartPoint *= rMatrix;
+            maControlPointA *= rMatrix;
+        }
+
+        if(maControlPointB == maEndPoint)
+        {
+            maControlPointB = maEndPoint = rMatrix * maEndPoint;
+        }
+        else
+        {
+            maEndPoint *= rMatrix;
+            maControlPointB *= rMatrix;
+        }
+    }
+
+    void B2DCubicBezier::fround()
+    {
+        if(maControlPointA == maStartPoint)
+        {
+            maControlPointA = maStartPoint = basegfx::B2DPoint(
+                basegfx::fround(maStartPoint.getX()),
+                basegfx::fround(maStartPoint.getY()));
+        }
+        else
+        {
+            maStartPoint = basegfx::B2DPoint(
+                basegfx::fround(maStartPoint.getX()),
+                basegfx::fround(maStartPoint.getY()));
+            maControlPointA = basegfx::B2DPoint(
+                basegfx::fround(maControlPointA.getX()),
+                basegfx::fround(maControlPointA.getY()));
+        }
+
+        if(maControlPointB == maEndPoint)
+        {
+            maControlPointB = maEndPoint = basegfx::B2DPoint(
+                basegfx::fround(maEndPoint.getX()),
+                basegfx::fround(maEndPoint.getY()));
+        }
+        else
+        {
+            maEndPoint = basegfx::B2DPoint(
+                basegfx::fround(maEndPoint.getX()),
+                basegfx::fround(maEndPoint.getY()));
+            maControlPointB = basegfx::B2DPoint(
+                basegfx::fround(maControlPointB.getX()),
+                basegfx::fround(maControlPointB.getY()));
+        }
+    }
+} // end of namespace basegfx
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */