Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 839 insertions, 0 deletions

diff --git a/cui/source/tabpages/tplnedef.cxx b/cui/source/tabpages/tplnedef.cxx
new file mode 100644
index 000000000..2cef64e0e
--- /dev/null
+++ b/cui/source/tabpages/tplnedef.cxx
@@ -0,0 +1,839 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <tools/urlobj.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+#include <unotools/pathoptions.hxx>
+#include <sfx2/filedlghelper.hxx>
+#include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
+
+#include <strings.hrc>
+
+#include <svx/xlineit0.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/xlndsit.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xtable.hxx>
+
+#include <svx/dlgctrl.hxx>
+#include <cuitabline.hxx>
+#include <defdlgname.hxx>
+#include <svx/svxdlg.hxx>
+#include <dialmgr.hxx>
+#include <svx/dlgutil.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/svxids.hrc>
+#include <cuitabarea.hxx>
+#include <svtools/unitconv.hxx>
+
+#define XOUT_WIDTH    150
+
+using namespace com::sun::star;
+
+
+SvxLineDefTabPage::SvxLineDefTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
+    : SfxTabPage(pPage, pController, "cui/ui/linestyletabpage.ui", "LineStylePage", &rInAttrs)
+    , rOutAttrs(rInAttrs)
+    , aXLineAttr(rInAttrs.GetPool())
+    , rXLSet(aXLineAttr.GetItemSet())
+    , pnDashListState(nullptr)
+    , pPageType(nullptr)
+    , nDlgType(0)
+    , pPosDashLb(nullptr)
+    , m_xLbLineStyles(new SvxLineLB(m_xBuilder->weld_combo_box("LB_LINESTYLES")))
+    , m_xLbType1(m_xBuilder->weld_combo_box("LB_TYPE_1"))
+    , m_xLbType2(m_xBuilder->weld_combo_box("LB_TYPE_2"))
+    , m_xNumFldNumber1(m_xBuilder->weld_spin_button("NUM_FLD_1"))
+    , m_xNumFldNumber2(m_xBuilder->weld_spin_button("NUM_FLD_2"))
+    , m_xMtrLength1(m_xBuilder->weld_metric_spin_button("MTR_FLD_LENGTH_1", FieldUnit::CM))
+    , m_xMtrLength2(m_xBuilder->weld_metric_spin_button("MTR_FLD_LENGTH_2", FieldUnit::CM))
+    , m_xMtrDistance(m_xBuilder->weld_metric_spin_button("MTR_FLD_DISTANCE", FieldUnit::CM))
+    , m_xCbxSynchronize(m_xBuilder->weld_check_button("CBX_SYNCHRONIZE"))
+    , m_xBtnAdd(m_xBuilder->weld_button("BTN_ADD"))
+    , m_xBtnModify(m_xBuilder->weld_button("BTN_MODIFY"))
+    , m_xBtnDelete(m_xBuilder->weld_button("BTN_DELETE"))
+    , m_xBtnLoad(m_xBuilder->weld_button("BTN_LOAD"))
+    , m_xBtnSave(m_xBuilder->weld_button("BTN_SAVE"))
+    , m_xCtlPreview(new weld::CustomWeld(*m_xBuilder, "CTL_PREVIEW", m_aCtlPreview))
+{
+    // this page needs ExchangeSupport
+    SetExchangeSupport();
+
+    // adjust metric
+    eFUnit = GetModuleFieldUnit( rInAttrs );
+
+    switch ( eFUnit )
+    {
+        case FieldUnit::M:
+        case FieldUnit::KM:
+            eFUnit = FieldUnit::MM;
+            break;
+        default: ; //prevent warning
+    }
+    SetFieldUnit(*m_xMtrDistance, eFUnit);
+    SetFieldUnit(*m_xMtrLength1, eFUnit);
+    SetFieldUnit(*m_xMtrLength2, eFUnit);
+
+    // determine PoolUnit
+    SfxItemPool* pPool = rOutAttrs.GetPool();
+    DBG_ASSERT( pPool, "Where is the pool?" );
+    ePoolUnit = pPool->GetMetric( SID_ATTR_LINE_WIDTH );
+
+    rXLSet.Put( XLineStyleItem(drawing::LineStyle_DASH) );
+    rXLSet.Put( XLineWidthItem(XOUT_WIDTH) );
+    rXLSet.Put( XLineDashItem( OUString(), XDash( css::drawing::DashStyle_RECT, 3, 7, 2, 40, 15 ) ) );
+    rXLSet.Put( XLineColorItem(OUString(), COL_BLACK) );
+
+    // #i34740#
+    m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
+
+    m_xBtnAdd->connect_clicked(LINK(this, SvxLineDefTabPage, ClickAddHdl_Impl));
+    m_xBtnModify->connect_clicked(LINK(this, SvxLineDefTabPage, ClickModifyHdl_Impl));
+    m_xBtnDelete->connect_clicked(LINK(this, SvxLineDefTabPage, ClickDeleteHdl_Impl));
+    m_xBtnLoad->connect_clicked(LINK(this, SvxLineDefTabPage, ClickLoadHdl_Impl));
+    m_xBtnSave->connect_clicked(LINK(this, SvxLineDefTabPage, ClickSaveHdl_Impl));
+
+    m_xNumFldNumber1->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber1Hdl_Impl));
+    m_xNumFldNumber2->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber2Hdl_Impl));
+    m_xLbLineStyles->connect_changed(LINK(this, SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl));
+
+    // #i122042# switch off default adding of 'none' and 'solid' entries
+    // for this ListBox; we want to select only editable/dashed styles
+    m_xLbLineStyles->setAddStandardFields(false);
+
+    // absolute (in mm) or relative (in %)
+    m_xCbxSynchronize->connect_toggled(LINK(this, SvxLineDefTabPage, ChangeMetricHdl_Impl));
+
+    // preview must be updated when there's something changed
+    Link<weld::ComboBox&, void> aLink = LINK(this, SvxLineDefTabPage, SelectTypeListBoxHdl_Impl);
+    m_xLbType1->connect_changed(aLink);
+    m_xLbType2->connect_changed(aLink);
+    Link<weld::MetricSpinButton&,void> aLink2 = LINK( this, SvxLineDefTabPage, ChangePreviewHdl_Impl );
+    m_xMtrLength1->connect_value_changed(aLink2);
+    m_xMtrLength2->connect_value_changed(aLink2);
+    m_xMtrDistance->connect_value_changed(aLink2);
+
+    pDashList = nullptr;
+}
+
+SvxLineDefTabPage::~SvxLineDefTabPage()
+{
+    m_xCtlPreview.reset();
+    m_xLbLineStyles.reset();
+}
+
+void SvxLineDefTabPage::Construct()
+{
+    // Line style fill; do *not* add default fields here
+    m_xLbLineStyles->Fill( pDashList );
+}
+
+void SvxLineDefTabPage::ActivatePage( const SfxItemSet& )
+{
+    if( nDlgType != 0 ) // area dialog
+        return;
+
+    // ActivatePage() is called before the dialog receives PageCreated() !!!
+    if( !pDashList.is() )
+        return;
+
+    if (*pPageType == PageType::Gradient &&
+        *pPosDashLb != -1)
+    {
+        m_xLbLineStyles->set_active(*pPosDashLb);
+    }
+    // so that a possibly existing line style is discarded
+    SelectLinestyleHdl_Impl( nullptr );
+
+    // determining (and possibly cutting) the name
+    // and displaying it in the GroupBox
+//             OUString        aString( CuiResId( RID_SVXSTR_TABLE ) );
+//             aString         += ": ";
+    INetURLObject   aURL( pDashList->GetPath() );
+
+    aURL.Append( pDashList->GetName() );
+    DBG_ASSERT( aURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
+
+    *pPageType = PageType::Area; // 2
+    *pPosDashLb = -1;
+}
+
+
+DeactivateRC SvxLineDefTabPage::DeactivatePage( SfxItemSet* _pSet )
+{
+    CheckChanges_Impl();
+
+    if( _pSet )
+        FillItemSet( _pSet );
+
+    return DeactivateRC::LeavePage;
+}
+
+void SvxLineDefTabPage::CheckChanges_Impl()
+{
+    // is here used to NOT lose changes
+    //css::drawing::DashStyle eXDS;
+
+    if( m_xNumFldNumber1->get_value_changed_from_saved() ||
+        m_xMtrLength1->get_value_changed_from_saved() ||
+        m_xLbType1->get_value_changed_from_saved() ||
+        m_xNumFldNumber2->get_value_changed_from_saved() ||
+        m_xMtrLength2->get_value_changed_from_saved() ||
+        m_xLbType2->get_value_changed_from_saved() ||
+        m_xMtrDistance->get_value_changed_from_saved() )
+    {
+        std::unique_ptr<weld::MessageDialog> xMessDlg(Application::CreateMessageDialog(GetFrameWeld(),
+                                                      VclMessageType::Warning, VclButtonsType::Cancel,
+                                                      CuiResId(RID_SVXSTR_ASK_CHANGE_LINESTYLE)));
+        xMessDlg->set_title(SvxResId(RID_SVXSTR_LINESTYLE));
+        xMessDlg->add_button(CuiResId(RID_SVXSTR_CHANGE), RET_BTN_1);
+        xMessDlg->add_button(CuiResId(RID_SVXSTR_ADD), RET_BTN_2);
+
+        short nRet = xMessDlg->run();
+
+        switch( nRet )
+        {
+            case RET_BTN_1:
+            {
+                ClickModifyHdl_Impl(*m_xBtnModify);
+            }
+            break;
+
+            case RET_BTN_2:
+            {
+                ClickAddHdl_Impl(*m_xBtnAdd);
+            }
+            break;
+
+            case RET_CANCEL:
+            break;
+        }
+    }
+
+    int nPos = m_xLbLineStyles->get_active();
+    if (nPos != -1)
+    {
+        *pPosDashLb = nPos;
+    }
+}
+
+
+bool SvxLineDefTabPage::FillItemSet( SfxItemSet* rAttrs )
+{
+    if( nDlgType == 0 ) // line dialog
+    {
+        if( *pPageType == PageType::Hatch )
+        {
+            FillDash_Impl();
+
+            OUString aString(m_xLbLineStyles->get_active_text());
+            rAttrs->Put( XLineStyleItem( drawing::LineStyle_DASH ) );
+            rAttrs->Put( XLineDashItem( aString, aDash ) );
+        }
+    }
+    return true;
+}
+
+
+void SvxLineDefTabPage::Reset( const SfxItemSet* rAttrs )
+{
+    if( rAttrs->GetItemState( GetWhich( XATTR_LINESTYLE ) ) != SfxItemState::DONTCARE )
+    {
+        drawing::LineStyle eXLS = static_cast<const XLineStyleItem&>( rAttrs->Get( GetWhich( XATTR_LINESTYLE ) ) ).GetValue();
+
+        switch( eXLS )
+        {
+            case drawing::LineStyle_NONE:
+            case drawing::LineStyle_SOLID:
+                m_xLbLineStyles->set_active(0);
+                break;
+            case drawing::LineStyle_DASH:
+            {
+                const XLineDashItem& rDashItem = rAttrs->Get( XATTR_LINEDASH );
+                aDash = rDashItem.GetDashValue();
+
+                m_xLbLineStyles->set_active(-1);
+                m_xLbLineStyles->set_active_text(rDashItem.GetName());
+                break;
+            }
+            default:
+                break;
+        }
+    }
+    SelectLinestyleHdl_Impl( nullptr );
+
+    // determine button state
+    if( pDashList->Count() )
+    {
+        m_xBtnModify->set_sensitive(true);
+        m_xBtnDelete->set_sensitive(true);
+        m_xBtnSave->set_sensitive(true);
+    }
+    else
+    {
+        m_xBtnModify->set_sensitive(false);
+        m_xBtnDelete->set_sensitive(false);
+        m_xBtnSave->set_sensitive(false);
+    }
+}
+
+std::unique_ptr<SfxTabPage> SvxLineDefTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs )
+{
+    return std::make_unique<SvxLineDefTabPage>(pPage, pController, *rOutAttrs);
+}
+
+IMPL_LINK(SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl, weld::ComboBox&, rListBox, void)
+{
+    SelectLinestyleHdl_Impl(&rListBox);
+}
+
+void SvxLineDefTabPage::SelectLinestyleHdl_Impl(const weld::ComboBox* p)
+{
+    if(!pDashList->Count())
+        return;
+
+    int nTmp = m_xLbLineStyles->get_active();
+    if (nTmp == -1)
+    {
+        OSL_ENSURE(false, "OOps, non-existent LineDash selected (!)");
+        nTmp = 1;
+    }
+
+    aDash = pDashList->GetDash( nTmp )->GetDash();
+
+    FillDialog_Impl();
+
+    rXLSet.Put( XLineDashItem( OUString(), aDash ) );
+
+    // #i34740#
+    m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
+    m_aCtlPreview.Invalidate();
+
+    // Is not set before, in order to take the new style
+    // only if there was an entry selected in the ListBox.
+    // If it was called via Reset(), then p is == NULL
+    if( p )
+        *pPageType = PageType::Hatch;
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ChangePreviewHdl_Impl, weld::MetricSpinButton&, void)
+{
+    FillDash_Impl();
+    m_aCtlPreview.Invalidate();
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber1Hdl_Impl, weld::SpinButton&, void)
+{
+    if (m_xNumFldNumber1->get_value() == 0)
+    {
+        m_xNumFldNumber2->set_min(1);
+    }
+    else
+    {
+        m_xNumFldNumber2->set_min(0);
+    }
+
+    ChangePreviewHdl_Impl(*m_xMtrLength1);
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber2Hdl_Impl, weld::SpinButton&, void)
+{
+    if (m_xNumFldNumber2->get_value() == 0)
+    {
+        m_xNumFldNumber1->set_min(1);
+    }
+    else
+    {
+        m_xNumFldNumber1->set_min(0);
+    }
+
+    ChangePreviewHdl_Impl(*m_xMtrLength1);
+}
+
+IMPL_LINK( SvxLineDefTabPage, ChangeMetricHdl_Impl, weld::ToggleButton&, r, void)
+{
+    ChangeMetricHdl_Impl(&r);
+}
+
+void SvxLineDefTabPage::ChangeMetricHdl_Impl(const weld::ToggleButton* p)
+{
+    if( !m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != eFUnit )
+    {
+        long nTmp1, nTmp2, nTmp3;
+
+        // was changed with Control
+        if( p )
+        {
+            nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * XOUT_WIDTH / 100;
+            nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * XOUT_WIDTH / 100;
+            nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * XOUT_WIDTH / 100;
+        }
+        else
+        {
+            nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
+            nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
+            nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
+        }
+        m_xMtrLength1->set_digits(2);
+        m_xMtrLength2->set_digits(2);
+        m_xMtrDistance->set_digits(2);
+
+        // adjust metric
+        m_xMtrLength1->set_unit(eFUnit);
+        m_xMtrLength2->set_unit(eFUnit);
+        m_xMtrDistance->set_unit(eFUnit);
+
+        // tdf#126736 max 5cm
+        m_xMtrLength1->set_range(0, 500, FieldUnit::CM);
+        m_xMtrLength2->set_range(0, 500, FieldUnit::CM);
+        m_xMtrDistance->set_range(0, 500, FieldUnit::CM);
+
+        SetMetricValue( *m_xMtrLength1, nTmp1, ePoolUnit );
+        SetMetricValue( *m_xMtrLength2, nTmp2, ePoolUnit );
+        SetMetricValue( *m_xMtrDistance, nTmp3, ePoolUnit );
+    }
+    else if( m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != FieldUnit::PERCENT )
+    {
+        long nTmp1, nTmp2, nTmp3;
+
+        // was changed with Control
+        if( p )
+        {
+            nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * 100 / XOUT_WIDTH;
+            nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * 100 / XOUT_WIDTH;
+            nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * 100 / XOUT_WIDTH;
+        }
+        else
+        {
+            nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
+            nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
+            nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
+        }
+
+        m_xMtrLength1->set_digits(0);
+        m_xMtrLength2->set_digits(0);
+        m_xMtrDistance->set_digits(0);
+
+        m_xMtrLength1->set_unit(FieldUnit::PERCENT);
+        m_xMtrLength2->set_unit(FieldUnit::PERCENT);
+        m_xMtrDistance->set_unit(FieldUnit::PERCENT);
+
+        // tdf#126736 800%
+        m_xMtrLength1->set_range(0, 800, FieldUnit::PERCENT);
+        m_xMtrLength2->set_range(0, 800, FieldUnit::PERCENT);
+        m_xMtrDistance->set_range(0, 800, FieldUnit::PERCENT);
+
+        m_xMtrLength1->set_value(nTmp1, FieldUnit::PERCENT);
+        m_xMtrLength2->set_value(nTmp2, FieldUnit::PERCENT);
+        m_xMtrDistance->set_value(nTmp3, FieldUnit::PERCENT);
+    }
+    SelectTypeHdl_Impl( nullptr );
+}
+
+IMPL_LINK( SvxLineDefTabPage, SelectTypeListBoxHdl_Impl, weld::ComboBox&, rListBox, void )
+{
+    SelectTypeHdl_Impl(&rListBox);
+}
+
+void  SvxLineDefTabPage::SelectTypeHdl_Impl(const weld::ComboBox* p)
+{
+    if (p == m_xLbType1.get() || !p)
+    {
+        if (m_xLbType1->get_active() == 0)
+        {
+            m_xMtrLength1->set_sensitive(false);
+            m_xMtrLength1->set_text("");
+        }
+        else if (!m_xMtrLength1->get_sensitive())
+        {
+            m_xMtrLength1->set_sensitive(true);
+            m_xMtrLength1->reformat();
+        }
+    }
+
+    if (p == m_xLbType2.get() || !p)
+    {
+        if (m_xLbType2->get_active() == 0)
+        {
+            m_xMtrLength2->set_sensitive(false);
+            m_xMtrLength2->set_text("");
+        }
+        else if (!m_xMtrLength2->get_sensitive())
+        {
+            m_xMtrLength2->set_sensitive(true);
+            m_xMtrLength2->reformat();
+        }
+    }
+    ChangePreviewHdl_Impl(*m_xMtrLength1);
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickAddHdl_Impl, weld::Button&, void)
+{
+    OUString aNewName(SvxResId(RID_SVXSTR_LINESTYLE));
+    OUString aDesc(CuiResId(RID_SVXSTR_DESC_LINESTYLE));
+    OUString aName;
+
+    long nCount = pDashList->Count();
+    long j = 1;
+    bool bDifferent = false;
+
+    while ( !bDifferent )
+    {
+        aName = aNewName + " " + OUString::number( j++ );
+        bDifferent = true;
+
+        for ( long i = 0; i < nCount && bDifferent; i++ )
+            if ( aName == pDashList->GetDash( i )->GetName() )
+                bDifferent = false;
+    }
+
+    SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
+    ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
+    bool bLoop = true;
+
+    while ( bLoop && pDlg->Execute() == RET_OK )
+    {
+        pDlg->GetName( aName );
+        bDifferent = true;
+
+        for( long i = 0; i < nCount && bDifferent; i++ )
+        {
+            if( aName == pDashList->GetDash( i )->GetName() )
+                bDifferent = false;
+        }
+
+        if( bDifferent )
+        {
+            bLoop = false;
+            FillDash_Impl();
+
+            long nDashCount = pDashList->Count();
+            pDashList->Insert( std::make_unique<XDashEntry>(aDash, aName), nDashCount );
+            m_xLbLineStyles->Append( *pDashList->GetDash(nDashCount), pDashList->GetUiBitmap(nDashCount) );
+
+            m_xLbLineStyles->set_active(m_xLbLineStyles->get_count() - 1);
+
+            *pnDashListState |= ChangeType::MODIFIED;
+
+            *pPageType = PageType::Hatch;
+
+            // save values for changes recognition (-> method)
+            m_xNumFldNumber1->save_value();
+            m_xMtrLength1->save_value();
+            m_xLbType1->save_value();
+            m_xNumFldNumber2->save_value();
+            m_xMtrLength2->save_value();
+            m_xLbType2->save_value();
+            m_xMtrDistance->save_value();
+        }
+        else
+        {
+            std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/queryduplicatedialog.ui"));
+            std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("DuplicateNameDialog"));
+            xBox->run();
+        }
+    }
+    pDlg.disposeAndClear();
+
+    // determine button state
+    if ( pDashList->Count() )
+    {
+        m_xBtnModify->set_sensitive(true);
+        m_xBtnDelete->set_sensitive(true);
+        m_xBtnSave->set_sensitive(true);
+    }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickModifyHdl_Impl, weld::Button&, void)
+{
+    int nPos = m_xLbLineStyles->get_active();
+    if (nPos == -1)
+        return;
+
+    OUString aDesc(CuiResId(RID_SVXSTR_DESC_LINESTYLE));
+    OUString aName( pDashList->GetDash( nPos )->GetName() );
+    OUString aOldName = aName;
+
+    SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
+    ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
+
+    long nCount = pDashList->Count();
+    bool bLoop = true;
+
+    while ( bLoop && pDlg->Execute() == RET_OK )
+    {
+        pDlg->GetName( aName );
+        bool bDifferent = true;
+
+        for( long i = 0; i < nCount && bDifferent; i++ )
+        {
+            if( aName == pDashList->GetDash( i )->GetName() &&
+                aName != aOldName )
+                bDifferent = false;
+        }
+
+        if ( bDifferent )
+        {
+            bLoop = false;
+            FillDash_Impl();
+
+            pDashList->Replace(std::make_unique<XDashEntry>(aDash, aName), nPos);
+            m_xLbLineStyles->Modify(*pDashList->GetDash(nPos), nPos, pDashList->GetUiBitmap(nPos));
+
+            m_xLbLineStyles->set_active(nPos);
+
+            *pnDashListState |= ChangeType::MODIFIED;
+
+            *pPageType = PageType::Hatch;
+
+            // save values for changes recognition (-> method)
+            m_xNumFldNumber1->save_value();
+            m_xMtrLength1->save_value();
+            m_xLbType1->save_value();
+            m_xNumFldNumber2->save_value();
+            m_xMtrLength2->save_value();
+            m_xLbType2->save_value();
+            m_xMtrDistance->save_value();
+        }
+        else
+        {
+            std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/queryduplicatedialog.ui"));
+            std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("DuplicateNameDialog"));
+            xBox->run();
+        }
+    }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickDeleteHdl_Impl, weld::Button&, void)
+{
+    int nPos = m_xLbLineStyles->get_active();
+    if (nPos != -1)
+    {
+        std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querydeletelinestyledialog.ui"));
+        std::unique_ptr<weld::MessageDialog> xQueryBox(xBuilder->weld_message_dialog("AskDelLineStyleDialog"));
+        if (xQueryBox->run() == RET_YES)
+        {
+            pDashList->Remove(nPos);
+            m_xLbLineStyles->remove(nPos);
+            m_xLbLineStyles->set_active(0);
+
+            SelectLinestyleHdl_Impl( nullptr );
+            *pPageType = PageType::Area; // style should not be taken
+
+            *pnDashListState |= ChangeType::MODIFIED;
+
+            ChangePreviewHdl_Impl( *m_xMtrLength1 );
+        }
+    }
+
+    // determine button state
+    if ( !pDashList->Count() )
+    {
+        m_xBtnModify->set_sensitive(false);
+        m_xBtnDelete->set_sensitive(false);
+        m_xBtnSave->set_sensitive(false);
+    }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickLoadHdl_Impl, weld::Button&, void)
+{
+    sal_uInt16 nReturn = RET_YES;
+
+    if ( *pnDashListState & ChangeType::MODIFIED )
+    {
+        std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querysavelistdialog.ui"));
+        std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("AskSaveList"));
+
+        nReturn = xBox->run();
+
+        if ( nReturn == RET_YES )
+            pDashList->Save();
+    }
+
+    if ( nReturn != RET_CANCEL )
+    {
+        ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILEOPEN_SIMPLE,
+                                      FileDialogFlags::NONE, GetFrameWeld());
+        OUString aStrFilterType( "*.sod" );
+        aDlg.AddFilter( aStrFilterType, aStrFilterType );
+        OUString aPalettePath(SvtPathOptions().GetPalettePath());
+        OUString aLastDir;
+        sal_Int32 nIndex = 0;
+        do
+        {
+            aLastDir = aPalettePath.getToken(0, ';', nIndex);
+        }
+        while (nIndex >= 0);
+
+        INetURLObject aFile(aLastDir);
+        aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
+
+        if( aDlg.Execute() == ERRCODE_NONE )
+        {
+            INetURLObject aURL( aDlg.GetPath() );
+            INetURLObject aPathURL( aURL );
+
+            aPathURL.removeSegment();
+            aPathURL.removeFinalSlash();
+
+            XDashListRef pDshLst = XPropertyList::AsDashList(XPropertyList::CreatePropertyList( XPropertyListType::Dash, aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), "" ));
+            pDshLst->SetName( aURL.getName() );
+
+            if( pDshLst->Load() )
+            {
+                pDashList = pDshLst;
+                static_cast<SvxLineTabDialog*>(GetDialogController())->SetNewDashList( pDashList );
+
+                m_xLbLineStyles->clear();
+                m_xLbLineStyles->Fill( pDashList );
+                Reset( &rOutAttrs );
+
+                pDashList->SetName( aURL.getName() );
+
+                *pnDashListState |= ChangeType::CHANGED;
+                *pnDashListState &= ~ChangeType::MODIFIED;
+            }
+            else
+            {
+                std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querynoloadedfiledialog.ui"));
+                std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("NoLoadedFileDialog"));
+                xBox->run();
+            }
+        }
+    }
+
+    // determine button state
+    if ( pDashList->Count() )
+    {
+        m_xBtnModify->set_sensitive(true);
+        m_xBtnDelete->set_sensitive(true);
+        m_xBtnSave->set_sensitive(true);
+    }
+    else
+    {
+        m_xBtnModify->set_sensitive(false);
+        m_xBtnDelete->set_sensitive(false);
+        m_xBtnSave->set_sensitive(false);
+    }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickSaveHdl_Impl, weld::Button&, void)
+{
+    ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILESAVE_SIMPLE, FileDialogFlags::NONE, GetFrameWeld());
+    OUString aStrFilterType( "*.sod" );
+    aDlg.AddFilter( aStrFilterType, aStrFilterType );
+
+    OUString aPalettePath(SvtPathOptions().GetPalettePath());
+    OUString aLastDir;
+    sal_Int32 nIndex = 0;
+    do
+    {
+        aLastDir = aPalettePath.getToken(0, ';', nIndex);
+    }
+    while (nIndex >= 0);
+
+    INetURLObject aFile(aLastDir);
+    DBG_ASSERT( aFile.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
+
+    if( !pDashList->GetName().isEmpty() )
+    {
+        aFile.Append( pDashList->GetName() );
+
+        if( aFile.getExtension().isEmpty() )
+            aFile.SetExtension( "sod" );
+    }
+
+    aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
+    if ( aDlg.Execute() != ERRCODE_NONE )
+        return;
+
+    INetURLObject aURL( aDlg.GetPath() );
+    INetURLObject aPathURL( aURL );
+
+    aPathURL.removeSegment();
+    aPathURL.removeFinalSlash();
+
+    pDashList->SetName( aURL.getName() );
+    pDashList->SetPath( aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
+
+    if( pDashList->Save() )
+    {
+        *pnDashListState &= ~ChangeType::MODIFIED;
+    }
+    else
+    {
+        std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querynosavefiledialog.ui"));
+        std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("NoSaveFileDialog"));
+        xBox->run();
+    }
+}
+
+void SvxLineDefTabPage::FillDash_Impl()
+{
+    css::drawing::DashStyle eXDS;
+
+    if (m_xCbxSynchronize->get_active())
+        eXDS = css::drawing::DashStyle_RECTRELATIVE;
+    else
+        eXDS = css::drawing::DashStyle_RECT;
+
+    aDash.SetDashStyle( eXDS );
+    aDash.SetDots( static_cast<sal_uInt8>(m_xNumFldNumber1->get_value()) );
+    aDash.SetDotLen( m_xLbType1->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength1, ePoolUnit ) );
+    aDash.SetDashes( static_cast<sal_uInt8>(m_xNumFldNumber2->get_value()) );
+    aDash.SetDashLen( m_xLbType2->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength2, ePoolUnit ) );
+    aDash.SetDistance( GetCoreValue( *m_xMtrDistance, ePoolUnit ) );
+
+    rXLSet.Put( XLineDashItem( OUString(), aDash ) );
+
+    // #i34740#
+    m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
+}
+
+void SvxLineDefTabPage::FillDialog_Impl()
+{
+    css::drawing::DashStyle eXDS = aDash.GetDashStyle(); // css::drawing::DashStyle_RECT, css::drawing::DashStyle_ROUND
+    if( eXDS == css::drawing::DashStyle_RECTRELATIVE )
+        m_xCbxSynchronize->set_active(true);
+    else
+        m_xCbxSynchronize->set_active(false);
+
+    m_xNumFldNumber1->set_value(aDash.GetDots());
+    SetMetricValue( *m_xMtrLength1, aDash.GetDotLen(), ePoolUnit );
+    m_xLbType1->set_active(aDash.GetDotLen() == 0 ? 0 : 1);
+    m_xNumFldNumber2->set_value(aDash.GetDashes());
+    SetMetricValue( *m_xMtrLength2, aDash.GetDashLen(), ePoolUnit );
+    m_xLbType2->set_active(aDash.GetDashLen() == 0 ? 0 : 1);
+    SetMetricValue( *m_xMtrDistance, aDash.GetDistance(), ePoolUnit );
+
+    ChangeMetricHdl_Impl(nullptr);
+
+    // save values for changes recognition (-> method)
+    m_xNumFldNumber1->save_value();
+    m_xMtrLength1->save_value();
+    m_xLbType1->save_value();
+    m_xNumFldNumber2->save_value();
+    m_xMtrLength2->save_value();
+    m_xLbType2->save_value();
+    m_xMtrDistance->save_value();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */