Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 298 insertions, 0 deletions

diff --git a/include/basegfx/polygon/b2dpolypolygontools.hxx b/include/basegfx/polygon/b2dpolypolygontools.hxx
new file mode 100644
index 000000000..9a83ab454
--- /dev/null
+++ b/include/basegfx/polygon/b2dpolypolygontools.hxx
@@ -0,0 +1,298 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#pragma once
+
+#include <basegfx/point/b2dpoint.hxx>
+#include <basegfx/polygon/b3dpolypolygon.hxx>
+#include <com/sun/star/drawing/PointSequenceSequence.hpp>
+#include <vector>
+#include <set>
+#include <basegfx/basegfxdllapi.h>
+
+
+namespace com::sun::star::drawing { struct PolyPolygonBezierCoords; }
+
+namespace basegfx
+{
+    class B2DPolyPolygon;
+    class B2DRange;
+}
+
+namespace basegfx::utils
+{
+        // B2DPolyPolygon tools
+
+        // Check and evtl. correct orientations of all contained Polygons so that
+        // the orientations of contained polygons will variate to express areas and
+        // holes
+        BASEGFX_DLLPUBLIC B2DPolyPolygon correctOrientations(const B2DPolyPolygon& rCandidate);
+
+        // make sure polygon with index 0L is not a hole. This may evtl. change the
+        // sequence of polygons, but allows to use polygon with index 0L to
+        // get the correct normal for the whole polyPolygon
+        BASEGFX_DLLPUBLIC B2DPolyPolygon correctOutmostPolygon(const B2DPolyPolygon& rCandidate);
+
+        // Subdivide all contained curves. Use distanceBound value if given.
+        BASEGFX_DLLPUBLIC B2DPolyPolygon adaptiveSubdivideByDistance(const B2DPolyPolygon& rCandidate, double fDistanceBound);
+
+        // Subdivide all contained curves. Use distanceBound value if given. Else, a convenient one
+        // is created.
+        BASEGFX_DLLPUBLIC B2DPolyPolygon adaptiveSubdivideByAngle(const B2DPolyPolygon& rCandidate, double fAngleBound = 0.0);
+
+        // isInside test for B2dPoint. On border is not inside as long as not true is given
+        // in bWithBorder flag. It is assumed that the orientations of the given polygon are correct.
+        BASEGFX_DLLPUBLIC bool isInside(const B2DPolyPolygon& rCandidate, const B2DPoint& rPoint, bool bWithBorder = false);
+
+        /** Get the range of a polyPolygon
+
+            For detailed description look at getRange(const B2DPolygon&).
+            This method just expands by the range of every sub-Polygon.
+
+            @param rCandidate
+            The B2DPolyPolygon possibly containing bezier segments
+
+            @return
+            The outer range of the polygon
+        */
+        BASEGFX_DLLPUBLIC B2DRange getRange(const B2DPolyPolygon& rCandidate);
+
+        // get signed area of polygon
+        BASEGFX_DLLPUBLIC double getSignedArea(const B2DPolyPolygon& rCandidate);
+
+        // get area of polygon
+        BASEGFX_DLLPUBLIC double getArea(const B2DPolyPolygon& rCandidate);
+
+        /** Apply given LineDashing to given polyPolygon
+
+            For a description see applyLineDashing in b2dpolygontoos.hxx
+        */
+        BASEGFX_DLLPUBLIC void applyLineDashing(
+            const B2DPolyPolygon& rCandidate,
+            const ::std::vector<double>& rDotDashArray,
+            B2DPolyPolygon* pLineTarget,
+            double fFullDashDotLen = 0.0);
+
+        // test if point is inside epsilon-range around the given PolyPolygon. Can be used
+        // for HitTesting. The epsilon-range is defined to be the tube around the PolyPolygon
+        // with distance fDistance and rounded edges (start and end point).
+        BASEGFX_DLLPUBLIC bool isInEpsilonRange(const B2DPolyPolygon& rCandidate, const B2DPoint& rTestPosition, double fDistance);
+
+        /** Helper class to transport PointIndices to a PolyPolygon,
+            with an operator< for convenient sorting in a std::set usage
+         */
+        class SAL_WARN_UNUSED BASEGFX_DLLPUBLIC PointIndex
+        {
+        private:
+            sal_uInt32 mnPolygonIndex;
+            sal_uInt32 mnPointIndex;
+
+        public:
+            PointIndex(sal_uInt32 nPolygonIndex, sal_uInt32 nPointIndex)
+            :   mnPolygonIndex(nPolygonIndex),
+                mnPointIndex(nPointIndex)
+            {}
+
+            sal_uInt32 getPolygonIndex() const { return mnPolygonIndex; }
+            sal_uInt32 getPointIndex() const { return mnPointIndex; }
+            bool operator<(const PointIndex& rComp) const;
+        };
+
+        /** the PointIndexSet itself; it allows to define a 'selection'of
+            points in a tools::PolyPolygon by giving the polygon and point index.
+            Adding points double makes no sense, hence the std::set
+         */
+        typedef std::set< PointIndex > PointIndexSet;
+
+        /** Read poly-polygon from SVG.
+
+            This function imports a poly-polygon from an SVG-D
+            attribute.
+
+            @param o_rPolyPoly
+            The output poly-polygon
+
+            @param rSvgDAttribute
+            A valid SVG-D attribute string
+
+            @param bHandleRelativeNextPointCompatible
+            If set to true, the old error that after a relative 'z' command
+            the current point was not reset to the first point of the current
+            polygon is kept; this is needed to read odf files.
+            If false, pure svg is used; this is needed for svg import.
+
+            @param pHelpPointIndexSet
+            If given, all points created in the target PolyPolygon
+            which are only helper points are added here using their
+            point indices; this are currently points created from
+            import of the 'a' and 'A' svg:d statements which create
+            bezier curve info as representation and maybe points
+            which are no 'real' svg:d points, but helper points. It
+            is necessary to identify these e.g. when markers need to
+            be created in the svg import
+
+            @return true, if the string was successfully parsed
+         */
+        BASEGFX_DLLPUBLIC bool importFromSvgD(
+            B2DPolyPolygon& o_rPolyPoly,
+            const OUString& rSvgDAttribute,
+            bool bHandleRelativeNextPointCompatible,
+            PointIndexSet* pHelpPointIndexSet);
+
+        // grow for polyPolygon. Move all geometry in each point in the direction of the normal in that point
+        // with the given amount. Value may be negative.
+        BASEGFX_DLLPUBLIC B2DPolyPolygon growInNormalDirection(const B2DPolyPolygon& rCandidate, double fValue);
+
+        // force all sub-polygons to a point count of nSegments
+        BASEGFX_DLLPUBLIC B2DPolyPolygon reSegmentPolyPolygon(const B2DPolyPolygon& rCandidate, sal_uInt32 nSegments);
+
+        // create polygon state at t from 0.0 to 1.0 between the two polygons. Both polygons must have the same
+        // organisation, e.g. same amount of polygons
+        BASEGFX_DLLPUBLIC B2DPolyPolygon interpolate(const B2DPolyPolygon& rOld1, const B2DPolyPolygon& rOld2, double t);
+
+        // create 3d tools::PolyPolygon from given 2d PolyPolygon. The given fZCoordinate is used to expand the
+        // third coordinate.
+        BASEGFX_DLLPUBLIC B3DPolyPolygon createB3DPolyPolygonFromB2DPolyPolygon(const B2DPolyPolygon& rCandidate, double fZCoordinate = 0.0);
+
+        // create 2d tools::PolyPolygon from given 3d PolyPolygon. All coordinates are transformed using the given
+        // matrix and the resulting x,y is used to form the new polygon.
+        BASEGFX_DLLPUBLIC B2DPolyPolygon createB2DPolyPolygonFromB3DPolyPolygon(const B3DPolyPolygon& rCandidate, const B3DHomMatrix& rMat);
+
+        // for each contained edge in each contained polygon calculate the smallest distance. Return the index to the smallest
+        // edge in rEdgeIndex and the index to the polygon in rPolygonIndex. The relative position on the edge is returned in rCut.
+        // If nothing was found (e.g. empty input plygon), DBL_MAX is returned.
+        BASEGFX_DLLPUBLIC double getSmallestDistancePointToPolyPolygon(const B2DPolyPolygon& rCandidate, const B2DPoint& rTestPoint, sal_uInt32& rPolygonIndex, sal_uInt32& rEdgeIndex, double& rCut);
+
+        // distort PolyPolygon. rOriginal describes the original range, where the given points describe the distorted
+        // corresponding points.
+        BASEGFX_DLLPUBLIC B2DPolyPolygon distort(const B2DPolyPolygon& rCandidate, const B2DRange& rOriginal, const B2DPoint& rTopLeft, const B2DPoint& rTopRight, const B2DPoint& rBottomLeft, const B2DPoint& rBottomRight);
+
+        // expand all segments (which are not yet) to curve segments. This is done with setting the control
+        // vectors on the 1/3 resp. 2/3 distances on each segment.
+        BASEGFX_DLLPUBLIC B2DPolyPolygon expandToCurve(const B2DPolyPolygon& rCandidate);
+
+        /** Predicate whether a given poly-polygon is a rectangle.
+
+            @param rPoly
+            tools::PolyPolygon to check
+
+            @return true, if the poly-polygon describes a rectangle
+            (contains exactly one polygon, polygon is closed, and the
+            points are either cw or ccw enumerations of a rectangle's
+            vertices). Note that intermediate points and duplicate
+            points are ignored.
+         */
+        BASEGFX_DLLPUBLIC bool isRectangle( const B2DPolyPolygon& rPoly );
+
+        /** Export poly-polygon to SVG.
+
+            This function exports a poly-polygon into an SVG-D
+            statement. Currently, output of relative point sequences
+            is not yet supported (might cause slightly larger output)
+
+            @param rPolyPoly
+            The poly-polygon to export
+
+            @param bUseRelativeCoordinates
+            When true, all coordinate values are exported as relative
+            to the current position. This tends to save some space,
+            since fewer digits needs to be written.
+
+            @param bDetectQuadraticBeziers
+            When true, the export tries to detect cubic bezier
+            segments in the input polygon, which can be represented by
+            quadratic bezier segments. Note that the generated string
+            causes versions prior to OOo2.0 to crash.
+
+            @param bHandleRelativeNextPointCompatible
+            If set to true, the old error that after a relative 'z' command
+            the current point was not reset to the first point of the current
+            polygon is kept; this is needed to read odf files.
+            If false, pure svg is used; this is needed for svg import.
+
+            @param bOOXMLMotionPath
+            If set to true, export string format that is acceptable for
+            for animation motion path for PowerPoint: always space delimited,
+            never neglect command char, always end with E, and do not export
+            H or V.
+
+            @return the generated SVG-D statement (the XML d attribute
+            value alone, without any "<path ...>" or "d="...")
+         */
+        BASEGFX_DLLPUBLIC OUString exportToSvgD(
+            const B2DPolyPolygon& rPolyPoly,
+            bool bUseRelativeCoordinates,
+            bool bDetectQuadraticBeziers,
+            bool bHandleRelativeNextPointCompatible,
+            bool bOOXMLMotionPath = false);
+
+        // #i76891# Try to remove existing curve segments if they are simply edges
+        BASEGFX_DLLPUBLIC B2DPolyPolygon simplifyCurveSegments(const B2DPolyPolygon& rCandidate);
+
+        /** Creates polypolygon for seven-segment display number
+
+            This function takes an integer number between 0 and 9 and
+            convert it into the well-known seven-segment display
+            number (like most digital clocks show their numbers). The
+            digit will exactly fit the unit rectangle. The polypolygon
+            will be a line polygon, i.e. if you need the segment parts
+            to have width, use createAreaGeometry() on the result.
+
+            @param cNumber
+            Number from '0' to '9' as ASCII char, or '-', 'E' and '.'
+            to convert to 7 segment code
+
+            @param bLitSegments
+            When true, return a polygon containing the segments that
+            are 'lit' for the given number. Return un-lit segments
+            otherwise.
+         */
+        B2DPolyPolygon createSevenSegmentPolyPolygon(char cNumber, bool bLitSegments);
+
+        /** snap some polygon coordinates to discrete coordinates
+
+            This method allows to snap some polygon points to discrete (integer) values
+            which equals e.g. a snap to discrete coordinates. It will snap points of
+            horizontal and vertical edges
+
+            @param rCandidate
+            The source polygon
+
+            @return
+            The modified version of the source polygon
+        */
+        BASEGFX_DLLPUBLIC B2DPolyPolygon snapPointsOfHorizontalOrVerticalEdges(const B2DPolyPolygon& rCandidate);
+
+        /// converters for css::drawing::PointSequence
+        BASEGFX_DLLPUBLIC B2DPolyPolygon UnoPointSequenceSequenceToB2DPolyPolygon(
+            const css::drawing::PointSequenceSequence& rPointSequenceSequenceSource);
+        BASEGFX_DLLPUBLIC void B2DPolyPolygonToUnoPointSequenceSequence(
+            const B2DPolyPolygon& rPolyPolygon,
+            css::drawing::PointSequenceSequence& rPointSequenceSequenceRetval);
+
+        /// converters for css::drawing::PolyPolygonBezierCoords (curved polygons)
+        BASEGFX_DLLPUBLIC B2DPolyPolygon UnoPolyPolygonBezierCoordsToB2DPolyPolygon(
+            const css::drawing::PolyPolygonBezierCoords& rPolyPolygonBezierCoordsSource);
+        BASEGFX_DLLPUBLIC void B2DPolyPolygonToUnoPolyPolygonBezierCoords(
+            const B2DPolyPolygon& rPolyPolygon,
+            css::drawing::PolyPolygonBezierCoords& rPolyPolygonBezierCoordsRetval);
+
+} // end of namespace basegfx::utils
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */