Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 189 insertions, 0 deletions

diff --git a/include/vcl/roadmapwizard.hxx b/include/vcl/roadmapwizard.hxx
new file mode 100644
index 000000000..6a55bacad
--- /dev/null
+++ b/include/vcl/roadmapwizard.hxx
@@ -0,0 +1,189 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_VCL_ROADMAPWIZARD_HXX
+#define INCLUDED_VCL_ROADMAPWIZARD_HXX
+
+#include <memory>
+#include <vcl/dllapi.h>
+#include <vcl/wizardmachine.hxx>
+
+namespace vcl
+{
+    struct RoadmapWizardImpl;
+
+    namespace RoadmapWizardTypes
+    {
+        typedef sal_Int16                                   PathId;
+        typedef ::std::vector< WizardTypes::WizardState >   WizardPath;
+    };
+
+    //= RoadmapWizard
+
+    /** is - no, not a wizard for a roadmap, but the base class for wizards
+        <em>supporting</em> a roadmap.
+
+        The basic new concept introduced is a <em>path</em>:<br/>
+        A <em>path</em> is a sequence of states, which are to be executed in a linear order.
+        Elements in the path can be skipped, depending on choices the user makes.
+
+        In the most simple wizards, you will have only one path consisting of <code>n</code> elements,
+        which are to be visited successively.
+
+        In a slightly more complex wizard, you will have one linear path, were certain
+        steps might be skipped due to user input. For instance, the user may decide to not specify
+        certain aspects of the to-be-created object (e.g. by unchecking a check box),
+        and the wizard then will simply disable the step which corresponds to this step.
+
+        In a yet more advanced wizards, you will have several paths of length <code>n1</code> and
+        <code>n2</code>, which share at least the first <code>k</code> states (where <code>k</code>
+        is at least 1), and an arbitrary number of other states.
+    */
+    class VCL_DLLPUBLIC RoadmapWizardMachine : public vcl::WizardMachine
+    {
+    private:
+        std::unique_ptr<RoadmapWizardImpl>  m_pImpl;
+
+    public:
+        RoadmapWizardMachine(weld::Window* _pParent);
+        virtual ~RoadmapWizardMachine( ) override;
+
+        void            SetRoadmapHelpId( const OString& _rId );
+
+        // returns whether a given state is enabled
+        bool            isStateEnabled(WizardTypes::WizardState nState) const;
+
+        // WizardDialog overridables
+        virtual bool    canAdvance() const override;
+        virtual void    updateTravelUI() override;
+
+    protected:
+        /** declares a valid path in the wizard
+
+            The very first path which is declared is automatically activated.
+
+            Note that all paths which are declared must have the very first state in
+            common. Also note that due to a restriction of the very base class (WizardDialog),
+            this common first state must be 0.
+
+            You cannot declare new paths once the wizard started, so it's recommended that
+            you do all declarations within your derivee's constructor.
+
+            @see activatePath
+
+            @param _nId
+                the unique id you wish to give this path. This id can later on be used
+                to refer to the path which you just declared
+        */
+        void    declarePath( RoadmapWizardTypes::PathId _nPathId, const RoadmapWizardTypes::WizardPath& _lWizardStates);
+
+        /** activates a path which has previously been declared with <member>declarePath</member>
+
+            You can only activate paths which share the first <code>k</code> states with the path
+            which is previously active (if any), where <code>k</code> is the index of the
+            current state within the current path.
+
+            <example>
+            Say you have paths, <code>(0,1,2,5)</code> and <code>(0,1,4,5)</code>. This means that after
+            step <code>1</code>, you either continue with state <code>2</code> or state <code>4</code>,
+            and after this, you finish in state <code>5</code>.<br/>
+            Now if the first path is active, and your current state is <code>1</code>, then you can
+            easily switch to the second path, since both paths start with <code>(0,1)</code>.<br/>
+            However, if your current state is <code>2</code>, then you can not switch to the second
+            path anymore.
+            </example>
+
+            @param _nPathId
+                the id of the path. The path must have been declared (under this id) with
+                <member>declarePath</member> before it can be activated.
+
+            @param _bDecideForIt
+                If <TRUE/>, the path will be completely activated, even if it is a conflicting path
+                (i.e. there is another path which shares the first <code>k</code> states with
+                the to-be-activated path.)<br/>
+                If <FALSE/>, then the new path is checked for conflicts with other paths. If such
+                conflicts exists, the path is not completely activated, but only up to the point
+                where it does <em>not</em> conflict.<br/>
+                With the paths in the example above, if you activate the second path (when both are
+                already declared), then only steps <code>0</code> and <code>1</code> are activated,
+                since they are common to both paths.
+        */
+        void    activatePath( RoadmapWizardTypes::PathId _nPathId, bool _bDecideForIt = false );
+
+        /** determine the next state to travel from the given one
+
+            This method (which is declared in WizardMachine and overwritten here)
+            ensures that traveling happens along the active path.
+
+            @see activatePath
+        */
+        virtual WizardTypes::WizardState determineNextState(WizardTypes::WizardState nCurrentState) const override;
+
+        /** en- or disables a state
+
+            In the wizard's roadmap, states to travel to can be freely chosen. To prevent
+            users from selecting a state which is currently not available, you can declare this
+            state as being disabled.
+
+            A situation where you need this may be when you have a checkbox which, when checked
+            by the user, enables a page with additional settings. As long as this checkbox is
+            not checked, the respective state would be disabled.
+
+            Note that in theory, you can declare multiple paths, instead of disabling states.
+            For instance, if you have a path where one state can be potentially disabled, then
+            you could declare a second path, which does not contain this state. However, the
+            disadvantage is that then, not the complete path would be visible in the roadmap,
+            but only all steps up to the point where the both paths diverge.<br/>
+            Another disadvantage is that the number of needed paths grows exponentially with
+            the number of states which can be potentially disabled.
+
+            @see declarePath
+        */
+        void    enableState(WizardTypes::WizardState nState, bool _bEnable = true);
+
+        /** returns true if and only if the given state is known in at least one declared path
+        */
+        bool    knowsState(WizardTypes::WizardState nState) const;
+
+        // WizardMachine overriables
+        virtual void            enterState(WizardTypes::WizardState nState) override;
+
+        /** returns a human readable name for a given state
+
+            There is a default implementation for this method, which returns the display name
+            as given in a call to describeState. If there is no description for the given state,
+            this is worth an assertion in a non-product build, and then an empty string is
+            returned.
+        */
+        virtual OUString  getStateDisplayName(WizardTypes::WizardState nState) const;
+
+    private:
+        DECL_DLLPRIVATE_LINK( OnRoadmapItemSelected, const OString&, bool );
+
+        /** updates the roadmap control to show the given path, as far as possible
+            (modulo conflicts with other paths)
+        */
+        VCL_DLLPRIVATE void implUpdateRoadmap( );
+    };
+} // namespace vcl
+
+
+#endif // OOO_ INCLUDED_VCL_ROADMAPWIZARD_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */