Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 412 insertions, 0 deletions

diff --git a/oox/source/dump/dumperbase.ini b/oox/source/dump/dumperbase.ini
new file mode 100644
index 000000000..efb42651f
--- /dev/null
+++ b/oox/source/dump/dumperbase.ini
@@ -0,0 +1,412 @@
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+#   Licensed to the Apache Software Foundation (ASF) under one or more
+#   contributor license agreements. See the NOTICE file distributed
+#   with this work for additional information regarding copyright
+#   ownership. The ASF licenses this file to you under the Apache
+#   License, Version 2.0 (the "License"); you may not use this file
+#   except in compliance with the License. You may obtain a copy of
+#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+# dumper settings ============================================================
+#
+# Basic concepts
+#
+# - Character encoding of dumper ini files is UTF-8.
+# - Whitespace characters are generally stripped, e.g. at start and end of
+#   lines, before/after equal signs, commas, etc.
+# - Comments start with the hash (#) or semicolon (;) character. Leading
+#   whitespace characters are ignored.
+#
+# ----------------------------------------------------------------------------
+
+# Enable entire dumper (default=off). This option does not affect the option
+# 'enable-import'.
+#   0=off, 1=on
+enable-dumper=1
+
+# Enable import after dumping (default=on). Disabling this option allows
+# to dump a file without loading it. This option is independent from the
+# 'enable-dumper' option.
+#   0=off, 1=on
+enable-import=1
+
+# Maximum size of binary stream dumps (default=infinite).
+max-binary-stream-size=65536
+
+# Maximum size of binary data blocks in content dumps (default=infinite).
+max-binary-data-size=128
+
+# Shows unknown trailing data as binary dump (default=on).
+#   0=off, 1=on
+show-trailing-unknown=1
+
+# Shows the absolute stream position of records in the record header field
+# (default=on).
+#   0=off, 1=on
+show-record-position=0
+
+# name lists =================================================================
+#
+# Syntax descriptions
+#
+# - Optional items are enclosed in brackets [].
+# - Optional items that may be repeated are marked with an ellipsis (...).
+# - Items in a set to choose from are separated by vertical lines (|).
+# - <LISTNAME> denotes the name of a list. List names may consist of any non-
+#   whitespace characters.
+# - <value>, <firstvalue>, <bitfield>, <bitmask> etc. denote integer values.
+#   Decimal and hexadecimal notation is supported, using C/C++ notation.
+# - <bool> denotes a boolean value. Possible values are 0|1|false|true.
+# - <constname> denotes a literal name for a constant or bit.
+#
+# ----------------------------------------------------------------------------
+#
+# constlist
+#
+# Defines names for a list of specific values.
+#
+# Syntax:
+#
+# constlist = <LISTNAME>
+#   default = <constname>
+#   include = <LISTNAME>[,<LISTNAME>...]
+#   exclude = <value>[,<value>...]
+#   quote-names = <bool>
+#   <value> = <constname>
+# end
+#
+# - default (optional): Declares <constname> as a default name for values not
+#   specified in the name list. <constname> may be the empty string. If not
+#   set, the literal string '?err:no-name' (unquoted) is the default name.
+# - include (optional): Includes the specified name list(s) into the own list.
+# - exclude (optional): Removes values from the name lists, useful e.g. after
+#   a name list has been included.
+# - quote-names (optional): Specifies whether to return the contained names
+#   enclosed in single quote (') characters. Default is false.
+#
+# The order of the declarations is important, later declarations may overwrite
+# names generated from earlier declarations.
+#
+# Example:
+#
+# constlist = EXAMPLE-CONSTLIST
+#   1 = my-value
+#   include = OTHER-LIST
+#   exclude = 2,3
+#   0x0004 = other-value
+# end
+#
+# - Defines the name 'my-value' for the constant 1.
+# - Includes 'OTHER-LIST' which may overwrite the name of the constant 1.
+# - Excludes the names of constants 2 and 3, which may have been included from
+#   the name list 'OTHER-LIST'.
+# - Defines the name 'other-value' for the constant 4, which may overwrite the
+#   name of this constant included from the name list 'OTHER-LIST'.
+#
+# ----------------------------------------------------------------------------
+#
+# multilist
+#
+# Defines names for contiguous ranges of values.
+#
+# Syntax:
+#
+# multilist = <LISTNAME>
+#   default = <constname>
+#   include = <LISTNAME>[,<LISTNAME>...]
+#   exclude = <value>[,<value>...]
+#   ignore-empty = <bool>
+#   <firstvalue> = <constname>[,<constname>...]
+# end
+#
+# - default (optional): See constlist above.
+# - include (optional): See constlist above.
+# - exclude (optional): See constlist above.
+# - ignore-empty (optional): Specifies whether to skip empty names in a list.
+#   - True = skips an empty entry, the default name will be generated.
+#   - False = creates an empty string for the entry.
+#   Default is true (skip empty entries).
+#
+# Examples:
+#
+# multilist = EXAMPLE-MULTILIST
+#   0 = value0,value1,,value3
+#   8 = value8
+# end
+#
+# - Defines the names 'value0' for the constant 0, 'value1' for the constant
+#   1, 'value3' for the constant 3, and 'value8' for the constant 8.
+#
+# multilist = EXAMPLE-MULTILIST-2
+#   include = EXAMPLE-MULTILIST
+#   ignore-empty = false
+#   default = other
+# end
+#
+# - Same as example above (includes EXAMPLE-MULTILIST), but defines the empty
+#   string for the constant 2. Other constants (less than 0 or greater than 3
+#   and not equal to 8) get the default name 'other'.
+#
+# ----------------------------------------------------------------------------
+#
+# shortlist
+#
+# Defines names for a contiguous range of values. The entire list definition
+# is given in a single text line.
+#
+# Syntax:
+#
+# shortlist = <LISTNAME>,<firstvalue>,<constname>[,<constname>...]
+#
+# Uses default settings of the multi-list (i.e. skips empty entries).
+#
+# ----------------------------------------------------------------------------
+#
+# flagslist
+#
+# Defines names for single bits in a bit field.
+#
+# Syntax:
+#
+# flagslist = <LISTNAME>
+#   include = <LISTNAME>[,<LISTNAME>...]
+#   exclude = <bitfield>[,<bitfield>...]
+#   ignore = <bitfield>
+#   <bitmask> = <cname> | !<cname> | :<cname> | !<cname0>!<cname1>
+# end
+#
+# - include (optional): See constlist above.
+# - exclude (optional): See constlist above.
+# - ignore (optional): Specifies bits to be ignored. Bits without an explicit
+#   name and not set in this declaration will be shown as unknown. Default is
+#   to not ignore a bit.
+# - <bitmask>: The bit to be named. Must be a value with a single bit set.
+#   - <cname> - Sets a name for the bit that will be shown if the bit is set.
+#     Does not show anything if the bit is cleared.
+#   - !<cname> - Sets a name for the bit that will be shown if the bit is
+#     cleared. Does not show anything if the bit is set.
+#   - :<cname> - Sets a name for the bit that will always be shown together
+#     with the actual state of the bit, appended as ':on' or ':off'.
+#   - !<cname0>!<cname1> - Sets a name for both the cleared bit (cname0), and
+#     for the set bit (cname1).
+#
+# ----------------------------------------------------------------------------
+#
+# combilist
+#
+# Defines names for single bits and for embedded values in a bit field. This
+# is an extension of the flagslist described above.
+#
+# Syntax:
+#
+# combilist = <LISTNAME>
+#   include = <LISTNAME>[,<LISTNAME>...]
+#   exclude = <bitmask>[,<bitmask>...]
+#   ignore = <bitfield>
+#   <bitmask> = <cname> | !<cname> | :<cname> | !<cname0>!<cname1>
+#   <bitfield> = <datatype>,<dataformat>,<bitfieldname>[,<LISTNAME>[,options...]]
+# end
+#
+# - include (optional): See constlist above.
+# - exclude (optional): See constlist above.
+# - ignore (optional): See flagslist above.
+# - <bitmask>: See flagslist above.
+# - <bitfield>: The mask of the embedded bitfield. Must be a value with
+#   exactly one sequence of at least 2 consecutive bits.
+#   - <datatype>: [u]int8 | [u]int16 | [u]int32 | [u]int64 | float | double
+#   - <dataformat>: dec | hex | shorthex | bin | fix | bool
+#   - <bitfieldname>: The name of the embedded bitfield.
+#   - <LISTAME>: Optional name list with names for the values of the embedded
+#     bitfield.
+#   - options: Additional options for this bitfield:
+#     - filter = <filterbitfield>~<filtervalue>: If set, the entire bitfield
+#       will only be written, if the complete data item currently dumped
+#       contains exactly the value specified in <filtervalue> in the bitfield
+#       specified in <filterbitfield>. Otherwise, nothing is written. It is
+#       possible to specify multiple filter rules for this bitfield. In that
+#       case, the bitfield will be written, if at least one filter rule
+#       applies for the current data item.
+#     - noshift = <bool>: If set to 'true', the extracted value will be
+#       shifted to the right (normalized). If set to 'false', the value will
+#       be written unshifted. Default is 'true'.
+#
+# ----------------------------------------------------------------------------
+#
+# unitconverter
+#
+# Converts values and appends a unit name.
+#
+# Syntax:
+#
+# unitconverter = <LISTNAME>,[/]<factor>[,<unitname>]
+#
+# ----------------------------------------------------------------------------
+
+unitconverter=CONV-DEC,1
+unitconverter=CONV-PERCENT,1,%
+unitconverter=CONV-FLOAT-TO-PERC,100,%
+unitconverter=CONV-DEG,1,°
+unitconverter=CONV-HMM-TO-CM,/1000,cm
+unitconverter=CONV-INCH-TO-CM,2.54,cm
+unitconverter=CONV-PT-TO-CM,/28.346457,cm
+unitconverter=CONV-PT1616-TO-CM,/1857713.4,cm
+unitconverter=CONV-TWIP-TO-CM,/566.92913,cm
+unitconverter=CONV-TWIP-TO-PT,/20,pt
+unitconverter=CONV-EMU-TO-CM,/36000,cm
+
+constlist=BOOLEAN
+  0=FALSE
+  default=TRUE
+end
+
+combilist=RK-FLAGS
+  0x00000001=div-100
+  0x00000002=integer
+  0xFFFFFFFC=int32,hex,value
+end
+
+constlist=CHARSET
+  0=win-1252-latin-1
+  1=system-default
+  2=symbol
+  77=apple-roman
+  128=win-932-japanese-shift-jis
+  129=win-949-korean-hangul
+  130=win-1361-korean-johab
+  134=win-936-chinese-simplified-gbk
+  136=win-950-chinese-traditional-big5
+  161=win-1253-greek
+  162=win-1254-turkish
+  163=win-1258-vietnamese
+  177=win-1255-hebrew
+  178=win-1256-arabic
+  186=win-1257-baltic
+  204=win-1251-cyrillic
+  222=win-874-thai
+  238=win-1250-latin-2-central-european
+  255=ibm-850-latin-1
+end
+
+combilist=FONT-PITCHFAMILY
+  0x0F=uint8,dec,pitch,FONT-PITCH
+  0xF0=uint8,dec,family,FONT-FAMILY
+end
+
+constlist=FONT-WEIGHT
+  400=normal
+  700=bold
+end
+
+shortlist=FONT-PITCH,0,unknown,fixed,variable
+shortlist=FONT-FAMILY,0,unknown,roman,swiss,modern,script,decorative
+
+constlist=CODEPAGES
+  367=ascii
+  437=ibm-437-us
+  708=iso-8859-6
+  720=ibm-720-arabic
+  737=ibm-737-greek
+  775=ibm-775-baltic
+  850=ibm-850-latin-1
+  852=ibm-852-latin-2-central-european
+  855=ibm-855-cyrillic
+  857=ibm-857-turkish
+  858=ibm-858-multilingual-latin-1-with-euro
+  860=ibm-860-portuguese
+  861=ibm-861-icelandic
+  862=ibm-862-hebrew
+  863=ibm-863-canadian-french
+  864=ibm-864-arabic
+  865=ibm-865-nordic
+  866=ibm-866-cyrillic-russian
+  869=ibm-869-greek-modern
+  874=win-874-thai
+  932=win-932-japanese-shift-jis
+  936=win-936-chinese-simplified-gbk
+  949=win-949-korean-wansung
+  950=win-950-chinese-traditional-big5
+  1200=utf-16
+  1250=win-1250-latin-2-central-european
+  1251=win-1251-cyrillic
+  1252=win-1252-latin-1
+  1253=win-1253-greek
+  1254=win-1254-turkish
+  1255=win-1255-hebrew
+  1256=win-1256-arabic
+  1257=win-1257-baltic
+  1258=win-1258-vietnamese
+  1361=win-1361-korean-johab
+  10000=apple-roman
+  10001=apple-japanese
+  10002=apple-chinese-traditional
+  10003=apple-korean
+  10004=apple-arabic
+  10005=apple-hebrew
+  10006=apple-greek
+  10007=apple-cyrillic
+  10008=apple-chinese-simplified
+  10010=apple-romanian
+  10017=apple-ukrainian
+  10029=apple-central-european-with-euro
+  10079=apple-icelandic
+  10081=apple-turkish
+  10082=apple-croatian
+  20127=ascii
+  20866=koi8-r
+  21866=koi8-u
+  28591=iso-8859-1
+  28592=iso-8859-2
+  28593=iso-8859-3
+  28594=iso-8859-4
+  28595=iso-8859-5
+  28596=iso-8859-6
+  28597=iso-8859-7
+  28598=iso-8859-8
+  28599=iso-8859-9
+  28605=iso-8859-15
+  32768=apple-romanian
+  32769=win-1252-latin-1
+  50220=iso-2022-jp
+  50225=iso-2022-kr
+  51932=euc-jp
+  51936=euc-cn
+  51949=euc-kr
+  65000=utf-7
+  65001=utf-8
+end
+
+multilist=COUNTRY
+  1=usa,canada,latin-america,,,,russia
+  20=egypt
+  30=greece,netherlands,belgium,france,spain,,hungary,,,italy
+  40=,switzerland,,austria,uk,denmark,sweden,norway,poland,germany
+  50=,,mexico,,,brazil
+  60=,australia,,,new-zealand,,thailand
+  80=,japan,korea,,vietnam,,china
+  90=turkey
+  210=,,,algeria,,,morocco,,libya
+  350=,portugal,,,iceland,,,,finland
+  420=czech
+  880=,,,,,,taiwan
+  960=,lebanon,jordan,syria,iraq,kuwait,saudi-arabia
+  970=,uae,israel,,qatar
+  980=,iran
+end
+
+multilist=SYSTEMCOLOR
+  0x00=scrollbar,desktop,active-title,inactive-title,menu,window-back,window-frame,menu-text
+  0x08=window-text,active-title-text,active-border,inactive-border,app-workspace,highlight,highlight-text,button-face
+  0x10=button-shadow,disabled-text,button-text,inactive-title-text,button-highlight,button-dark-shadow,button-light-shadow,tooltip-text
+  0x18=tooltip-back,,hot-light,active-title-2,inactive-title-2,menu-highlight,menubar
+end
+
+# ============================================================================