Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 280 insertions, 0 deletions

diff --git a/sc/source/ui/sidebar/CellBorderStyleControl.cxx b/sc/source/ui/sidebar/CellBorderStyleControl.cxx
new file mode 100644
index 000000000..6a6d7c74d
--- /dev/null
+++ b/sc/source/ui/sidebar/CellBorderStyleControl.cxx
@@ -0,0 +1,280 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include "CellBorderStyleControl.hxx"
+#include <editeng/boxitem.hxx>
+#include <editeng/borderline.hxx>
+#include <sfx2/app.hxx>
+#include <sfx2/bindings.hxx>
+#include <sfx2/dispatch.hxx>
+#include <svx/svxids.hrc>
+#include <vcl/settings.hxx>
+#include <editeng/lineitem.hxx>
+#include <memory>
+
+namespace sc::sidebar {
+
+#define FRM_VALID_LEFT      0x01
+#define FRM_VALID_RIGHT     0x02
+#define FRM_VALID_TOP       0x04
+#define FRM_VALID_BOTTOM    0x08
+#define FRM_VALID_HINNER    0x10
+#define FRM_VALID_VINNER    0x20
+#define FRM_VALID_OUTER     0x0f
+#define FRM_VALID_ALL       0xff
+
+CellBorderStylePopup::CellBorderStylePopup(weld::Toolbar* pParent, const OString& rId, SfxDispatcher* pDispatcher)
+    : WeldToolbarPopup(nullptr, pParent, "modules/scalc/ui/floatingborderstyle.ui", "FloatingBorderStyle")
+    , maToolButton(pParent, rId)
+    , mpDispatcher(pDispatcher)
+    , mxTBBorder1(m_xBuilder->weld_toolbar("border1"))
+    , mxTBBorder2(m_xBuilder->weld_toolbar("border2"))
+    , mxTBBorder3(m_xBuilder->weld_toolbar("border3"))
+    , mxTBBorder4(m_xBuilder->weld_toolbar("border4"))
+{
+    Initialize();
+}
+
+void CellBorderStylePopup::GrabFocus()
+{
+    mxTBBorder1->grab_focus();
+}
+
+CellBorderStylePopup::~CellBorderStylePopup()
+{
+}
+
+void CellBorderStylePopup::Initialize()
+{
+    mxTBBorder1->connect_clicked ( LINK(this, CellBorderStylePopup, TB1SelectHdl) );
+
+    mxTBBorder2->connect_clicked ( LINK(this, CellBorderStylePopup, TB2and3SelectHdl) );
+    mxTBBorder3->connect_clicked ( LINK(this, CellBorderStylePopup, TB2and3SelectHdl) );
+
+    mxTBBorder4->connect_clicked ( LINK(this, CellBorderStylePopup, TB4SelectHdl) );
+}
+
+IMPL_LINK(CellBorderStylePopup, TB1SelectHdl, const OString&, rId, void)
+{
+    SvxBoxItem          aBorderOuter( SID_ATTR_BORDER_OUTER );
+    SvxBoxInfoItem      aBorderInner( SID_ATTR_BORDER_INNER );
+    editeng::SvxBorderLine theDefLine(nullptr, 1);
+    editeng::SvxBorderLine *pLeft = nullptr, *pRight = nullptr, *pTop = nullptr, *pBottom = nullptr;
+    sal_uInt8 nValidFlags = 0;
+
+    if (rId == "none")
+    {
+        nValidFlags |= FRM_VALID_ALL;
+        SvxLineItem     aLineItem1( SID_ATTR_BORDER_DIAG_BLTR );
+        SvxLineItem     aLineItem2( SID_ATTR_BORDER_DIAG_TLBR );
+        aLineItem1.SetLine( nullptr );     //modify
+        aLineItem2.SetLine( nullptr );     //modify
+        mpDispatcher->ExecuteList(
+            SID_ATTR_BORDER_DIAG_BLTR, SfxCallMode::RECORD, { &aLineItem1 });
+        mpDispatcher->ExecuteList(
+            SID_ATTR_BORDER_DIAG_TLBR, SfxCallMode::RECORD, { &aLineItem2 });
+    }
+    else if (rId == "all")
+    {
+        pLeft = pRight = pTop = pBottom = &theDefLine;
+        aBorderInner.SetLine( &theDefLine, SvxBoxInfoItemLine::HORI );
+        aBorderInner.SetLine( &theDefLine, SvxBoxInfoItemLine::VERT );
+        nValidFlags |= FRM_VALID_ALL;
+    }
+    else if (rId == "outside")
+    {
+        pLeft = pRight = pTop = pBottom = &theDefLine;
+        nValidFlags |= FRM_VALID_OUTER;
+    }
+    else if (rId == "thickbox")
+    {
+        theDefLine.SetWidth(DEF_LINE_WIDTH_2);
+        pLeft = pRight = pTop = pBottom = &theDefLine;
+        nValidFlags |= FRM_VALID_OUTER;
+    }
+
+    aBorderOuter.SetLine( pLeft, SvxBoxItemLine::LEFT );
+    aBorderOuter.SetLine( pRight, SvxBoxItemLine::RIGHT );
+    aBorderOuter.SetLine( pTop, SvxBoxItemLine::TOP );
+    aBorderOuter.SetLine( pBottom, SvxBoxItemLine::BOTTOM );
+
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::TOP,       0 != (nValidFlags&FRM_VALID_TOP ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::BOTTOM,    0 != (nValidFlags&FRM_VALID_BOTTOM ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::LEFT,      0 != (nValidFlags&FRM_VALID_LEFT));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::RIGHT,     0 != (nValidFlags&FRM_VALID_RIGHT ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::HORI,      0 != (nValidFlags&FRM_VALID_HINNER ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::VERT,      0 != (nValidFlags&FRM_VALID_VINNER));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISTANCE );
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISABLE, false );
+
+    mpDispatcher->ExecuteList(
+        SID_ATTR_BORDER, SfxCallMode::RECORD, { &aBorderOuter, &aBorderInner });
+
+    maToolButton.set_inactive();
+}
+
+IMPL_LINK(CellBorderStylePopup, TB2and3SelectHdl, const OString&, rId, void)
+{
+    if (rId == "diagup")
+    {
+        editeng::SvxBorderLine aTmp( nullptr, 1 );
+        SvxLineItem     aLineItem( SID_ATTR_BORDER_DIAG_BLTR );
+        aLineItem.SetLine( &aTmp );
+        mpDispatcher->ExecuteList(
+            SID_ATTR_BORDER_DIAG_BLTR, SfxCallMode::RECORD, { &aLineItem });
+    }
+    else if (rId == "diagdown")
+    {
+        editeng::SvxBorderLine aTmp( nullptr, 1 );
+        SvxLineItem     aLineItem( SID_ATTR_BORDER_DIAG_TLBR );
+        aLineItem.SetLine( &aTmp );
+        mpDispatcher->ExecuteList(
+            SID_ATTR_BORDER_DIAG_TLBR, SfxCallMode::RECORD, { &aLineItem });
+    }
+    else
+    {
+        SvxBoxItem          aBorderOuter( SID_ATTR_BORDER_OUTER );
+        SvxBoxInfoItem      aBorderInner( SID_ATTR_BORDER_INNER );
+        editeng::SvxBorderLine theDefLine(nullptr, 1);
+        editeng::SvxBorderLine       *pLeft = nullptr,
+                            *pRight = nullptr,
+                            *pTop = nullptr,
+                            *pBottom = nullptr;
+        sal_uInt8               nValidFlags = 0;
+        if (rId == "left")
+        {
+            pLeft = &theDefLine;
+            nValidFlags |= FRM_VALID_LEFT;
+        }
+        else if (rId == "right")
+        {
+            if(!AllSettings::GetLayoutRTL())
+            {
+                pRight = &theDefLine;
+                nValidFlags |= FRM_VALID_RIGHT;
+            }
+            else
+            {
+                pLeft = &theDefLine;
+                nValidFlags |= FRM_VALID_LEFT;
+            }
+        }
+        else if (rId == "top")
+        {
+            pTop = &theDefLine;
+            nValidFlags |= FRM_VALID_TOP;
+        }
+        else if (rId == "bottom")
+        {
+            pBottom = &theDefLine;
+            nValidFlags |= FRM_VALID_BOTTOM;
+        }
+        else if (rId == "topbottom")
+        {
+            pTop =  pBottom = &theDefLine;
+            nValidFlags |= FRM_VALID_BOTTOM|FRM_VALID_TOP;
+        }
+        else if (rId == "leftright")
+        {
+            pLeft = pRight = &theDefLine;
+            nValidFlags |=  FRM_VALID_RIGHT|FRM_VALID_LEFT;
+        }
+        aBorderOuter.SetLine( pLeft, SvxBoxItemLine::LEFT );
+        aBorderOuter.SetLine( pRight, SvxBoxItemLine::RIGHT );
+        aBorderOuter.SetLine( pTop, SvxBoxItemLine::TOP );
+        aBorderOuter.SetLine( pBottom, SvxBoxItemLine::BOTTOM );
+
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::TOP,       0 != (nValidFlags&FRM_VALID_TOP ));
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::BOTTOM,    0 != (nValidFlags&FRM_VALID_BOTTOM ));
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::LEFT,      0 != (nValidFlags&FRM_VALID_LEFT));
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::RIGHT,     0 != (nValidFlags&FRM_VALID_RIGHT ));
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::HORI,      0 != (nValidFlags&FRM_VALID_HINNER ));
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::VERT,      0 != (nValidFlags&FRM_VALID_VINNER));
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISTANCE );
+        aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISABLE, false );
+
+        mpDispatcher->ExecuteList(
+            SID_ATTR_BORDER, SfxCallMode::RECORD, { &aBorderOuter, &aBorderInner});
+    }
+
+    maToolButton.set_inactive();
+}
+
+IMPL_LINK(CellBorderStylePopup, TB4SelectHdl, const OString&, rId, void)
+{
+    SvxBoxItem          aBorderOuter( SID_ATTR_BORDER_OUTER );
+    SvxBoxInfoItem      aBorderInner( SID_ATTR_BORDER_INNER );
+    std::unique_ptr<editeng::SvxBorderLine> pTop;
+    std::unique_ptr<editeng::SvxBorderLine> pBottom;
+    sal_uInt8               nValidFlags = 0;
+    using namespace ::com::sun::star::table::BorderLineStyle;
+
+    //FIXME: properly adapt to new line border model
+
+    if (rId == "thickbottom")
+    {
+        pBottom.reset(new editeng::SvxBorderLine(nullptr, DEF_LINE_WIDTH_2 ));
+        nValidFlags |= FRM_VALID_BOTTOM;
+    }
+    else if (rId == "doublebottom")
+    {
+        pBottom.reset(new editeng::SvxBorderLine(nullptr));
+        pBottom->GuessLinesWidths(SvxBorderLineStyle::DOUBLE, DEF_LINE_WIDTH_0, DEF_LINE_WIDTH_0, DEF_LINE_WIDTH_1);
+        nValidFlags |= FRM_VALID_BOTTOM;
+    }
+    else if (rId == "topthickbottom")
+    {
+        pBottom.reset(new editeng::SvxBorderLine(nullptr, DEF_LINE_WIDTH_2 ));
+        pTop.reset(new editeng::SvxBorderLine(nullptr, 1));
+        nValidFlags |= FRM_VALID_BOTTOM|FRM_VALID_TOP;
+    }
+    else if (rId == "topdoublebottom")
+    {
+        pBottom.reset(new editeng::SvxBorderLine(nullptr));
+        pBottom->GuessLinesWidths(SvxBorderLineStyle::DOUBLE, DEF_LINE_WIDTH_0, DEF_LINE_WIDTH_0, DEF_LINE_WIDTH_1);
+        pTop.reset(new editeng::SvxBorderLine(nullptr, 1));
+        nValidFlags |= FRM_VALID_BOTTOM|FRM_VALID_TOP;
+    }
+
+    aBorderOuter.SetLine( pTop.get(), SvxBoxItemLine::TOP );
+    aBorderOuter.SetLine( pBottom.get(), SvxBoxItemLine::BOTTOM );
+    aBorderOuter.SetLine( nullptr, SvxBoxItemLine::LEFT );
+    aBorderOuter.SetLine( nullptr, SvxBoxItemLine::RIGHT );
+
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::TOP,       0 != (nValidFlags&FRM_VALID_TOP ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::BOTTOM,    0 != (nValidFlags&FRM_VALID_BOTTOM ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::LEFT,      0 != (nValidFlags&FRM_VALID_LEFT ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::RIGHT,     0 != (nValidFlags&FRM_VALID_RIGHT ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::HORI,      0 != (nValidFlags&FRM_VALID_HINNER ));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::VERT,      0 != (nValidFlags&FRM_VALID_VINNER));
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISTANCE );
+    aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISABLE, false );
+
+    mpDispatcher->ExecuteList(
+        SID_ATTR_BORDER, SfxCallMode::RECORD, { &aBorderOuter, &aBorderInner });
+
+    pTop.reset();
+    pBottom.reset();
+
+    maToolButton.set_inactive();
+}
+
+} // end of namespace sc::sidebar
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */