Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1059 insertions, 0 deletions

diff --git a/sc/source/ui/vba/vbachart.cxx b/sc/source/ui/vba/vbachart.cxx
new file mode 100644
index 000000000..d83cee30b
--- /dev/null
+++ b/sc/source/ui/vba/vbachart.cxx
@@ -0,0 +1,1059 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+#include "vbachart.hxx"
+#include <com/sun/star/beans/XPropertySet.hpp>
+#include <com/sun/star/lang/XMultiServiceFactory.hpp>
+#include <com/sun/star/sheet/XCellRangeAddressable.hpp>
+#include <com/sun/star/chart/XAxisXSupplier.hpp>
+#include <com/sun/star/chart/XAxisYSupplier.hpp>
+#include <com/sun/star/chart/XAxisZSupplier.hpp>
+#include <com/sun/star/chart/XTwoAxisXSupplier.hpp>
+#include <com/sun/star/chart/XTwoAxisYSupplier.hpp>
+#include <com/sun/star/chart/XChartDataArray.hpp>
+#include <com/sun/star/chart/ChartSymbolType.hpp>
+#include <com/sun/star/chart/ChartSolidType.hpp>
+#include <com/sun/star/chart/ChartDataRowSource.hpp>
+#include <ooo/vba/excel/XlChartType.hpp>
+#include <ooo/vba/excel/XlRowCol.hpp>
+#include <ooo/vba/excel/XlAxisType.hpp>
+#include <ooo/vba/excel/XlAxisGroup.hpp>
+
+#include <basic/sberrors.hxx>
+#include "vbachartobject.hxx"
+#include "vbarange.hxx"
+#include "vbacharttitle.hxx"
+#include "vbaaxes.hxx"
+#include <document.hxx>
+
+using namespace ::com::sun::star;
+using namespace ::ooo::vba;
+using namespace ::ooo::vba::excel::XlChartType;
+using namespace ::ooo::vba::excel::XlRowCol;
+using namespace ::ooo::vba::excel::XlAxisType;
+using namespace ::ooo::vba::excel::XlAxisGroup;
+
+const OUString CHART_NAME("Name");
+// #TODO move this constant to vbaseries.[ch]xx ( when it exists )
+const OUString DEFAULTSERIESPREFIX("Series");
+const OUString DATAROWSOURCE("DataRowSource");
+const OUString UPDOWN("UpDown");
+const OUString VOLUME("Volume");
+const OUString LINES("Lines");
+const OUString SPLINETYPE("SplineType");
+const OUString SYMBOLTYPE("SymbolType");
+const OUString DEEP("Deep");
+const OUString SOLIDTYPE("SolidType");
+const OUString VERTICAL("Vertical");
+const OUString PERCENT("Percent");
+const OUString STACKED("Stacked");
+const OUString DIM3D("Dim3D");
+const OUString HASMAINTITLE("HasMainTitle");
+const OUString HASLEGEND("HasLegend");
+
+ScVbaChart::ScVbaChart( const css::uno::Reference< ov::XHelperInterface >& _xParent, const css::uno::Reference< css::uno::XComponentContext >& _xContext, const css::uno::Reference< css::lang::XComponent >& _xChartComponent, const css::uno::Reference< css::table::XTableChart >& _xTableChart ) : ChartImpl_BASE( _xParent, _xContext ), mxTableChart( _xTableChart )
+{
+    mxChartDocument.set( _xChartComponent, uno::UNO_QUERY_THROW ) ;
+    // #TODO is it possible that the XPropertySet interface is not set
+    // code in setPlotBy seems to indicate that this is possible? but
+    // additionally there is no check in most of the places where it is used
+    // ( and therefore could possibly be NULL )
+    // I'm going to let it throw for the moment ( npower )
+    mxDiagramPropertySet.set( mxChartDocument->getDiagram(), uno::UNO_QUERY_THROW );
+    mxChartPropertySet.set( _xChartComponent, uno::UNO_QUERY_THROW ) ;
+}
+
+OUString SAL_CALL
+ScVbaChart::getName()
+{
+    OUString sName;
+    uno::Reference< beans::XPropertySet > xProps( mxChartDocument, uno::UNO_QUERY_THROW );
+    try
+    {
+        xProps->getPropertyValue( CHART_NAME ) >>= sName;
+    }
+    catch( const uno::Exception & ) // swallow exceptions
+    {
+    }
+    return sName;
+}
+
+uno::Any  SAL_CALL
+ScVbaChart::SeriesCollection(const uno::Any&)
+{
+    return uno::Any();
+}
+
+::sal_Int32 SAL_CALL
+ScVbaChart::getChartType()
+{
+    sal_Int32 nChartType = -1;
+    try
+    {
+        OUString sDiagramType = mxChartDocument->getDiagram()->getDiagramType();
+        if ( sDiagramType == "com.sun.star.chart.AreaDiagram" )
+        {
+            if (is3D())
+            {
+                nChartType = getStackedType(xl3DAreaStacked, xl3DAreaStacked100, xl3DArea);
+            }
+            else
+            {
+                nChartType = getStackedType(xlAreaStacked, xlAreaStacked100, xlArea);
+            }
+        }
+        else if ( sDiagramType == "com.sun.star.chart.PieDiagram" )
+        {
+            if (is3D())
+                nChartType = xl3DPie;
+            else
+                nChartType = xlPie;                 /*TODO XlChartType  xlPieExploded, XlChartType xlPieOfPie */
+        }
+        else if ( sDiagramType == "com.sun.star.chart.BarDiagram" )
+        {
+            sal_Int32 nSolidType = chart::ChartSolidType::RECTANGULAR_SOLID;
+            if (mxDiagramPropertySet->getPropertySetInfo()->hasPropertyByName(SOLIDTYPE))
+            {       //in 2D diagrams 'SolidType' may not be set
+                if (is3D())
+                    mxDiagramPropertySet->getPropertyValue(SOLIDTYPE) >>= nSolidType;
+            }
+            switch (nSolidType)
+            {
+                case chart::ChartSolidType::CONE:
+                    nChartType = getSolidType(xlConeCol, xlConeColStacked, xlConeColStacked100, xlConeColClustered, xlConeBarStacked, xlConeBarStacked100, xlConeBarClustered);
+                    break;
+                case chart::ChartSolidType::CYLINDER:
+                    nChartType = getSolidType(xlCylinderCol, xlCylinderColStacked, xlCylinderColStacked100, xlCylinderColClustered, xlCylinderBarStacked, xlCylinderBarStacked100, xlCylinderBarClustered);
+                    break;
+                case chart::ChartSolidType::PYRAMID:
+                    nChartType = getSolidType(xlPyramidCol, xlPyramidColStacked, xlPyramidColStacked100, xlPyramidColClustered, xlPyramidBarStacked, xlPyramidBarStacked100, xlPyramidBarClustered);
+                    break;
+                default: // RECTANGULAR_SOLID
+                    if (is3D())
+                    {
+                        nChartType = getSolidType(xl3DColumn, xl3DColumnStacked, xl3DColumnStacked100, xl3DColumnClustered, xl3DBarStacked, xl3DBarStacked100, xl3DBarClustered);
+                    }
+                    else
+                    {
+                        nChartType = getSolidType(xlColumnClustered,  xlColumnStacked, xlColumnStacked100, xlColumnClustered, xlBarStacked, xlBarStacked100, xlBarClustered);
+                    }
+                    break;
+                }
+            }
+        else if ( sDiagramType == "com.sun.star.chart.StockDiagram" )
+        {
+            bool bVolume = false;
+            mxDiagramPropertySet->getPropertyValue(VOLUME) >>= bVolume;
+            if (bVolume)
+            {
+                nChartType = getStockUpDownValue(xlStockVOHLC, xlStockVHLC);
+            }
+            else
+            {
+                nChartType = getStockUpDownValue(xlStockOHLC, xlStockHLC);
+            }
+        }
+        else if ( sDiagramType == "com.sun.star.chart.XYDiagram" )
+        {
+            bool bHasLines = false;
+            mxDiagramPropertySet->getPropertyValue(LINES) >>= bHasLines;
+            sal_Int32 nSplineType = 0;
+            mxDiagramPropertySet->getPropertyValue(SPLINETYPE) >>= nSplineType;
+            if (nSplineType == 1)
+            {
+                nChartType = getMarkerType(xlXYScatterSmooth, xlXYScatterSmoothNoMarkers);
+            }
+            else if (bHasLines)
+            {
+                nChartType = getMarkerType(xlXYScatterLines, xlXYScatterLinesNoMarkers);
+            }
+            else
+            {
+                nChartType = xlXYScatter;
+            }
+        }
+        else if ( sDiagramType == "com.sun.star.chart.LineDiagram" )
+        {
+            if (is3D())
+            {
+                nChartType = xl3DLine;
+            }
+            else if (hasMarkers())
+            {
+                nChartType = getStackedType(xlLineMarkersStacked, xlLineMarkersStacked100, xlLineMarkers);
+            }
+            else
+            {
+                nChartType = getStackedType(xlLineStacked, xlLineStacked100, xlLine);
+            }
+        }
+        else if ( sDiagramType == "com.sun.star.chart.DonutDiagram" )
+        {
+            nChartType = xlDoughnut;                    // TODO DoughnutExploded ??
+        }
+        else if ( sDiagramType == "com.sun.star.chart.NetDiagram" )
+        {
+            nChartType = getMarkerType(xlRadarMarkers, xlRadar);
+        }
+    }
+    catch ( const uno::Exception& )
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+    return nChartType;
+}
+
+void SAL_CALL
+ScVbaChart::setChartType( ::sal_Int32 _nChartType )
+{
+    try
+    {
+        switch (_nChartType)
+        {
+        case xlColumnClustered:
+        case xlColumnStacked:
+        case xlColumnStacked100:
+        case xl3DColumnClustered:
+        case xl3DColumnStacked:
+        case xl3DColumnStacked100:
+        case xl3DColumn:
+        case xlBarClustered:
+        case xlBarStacked:
+        case xlBarStacked100:
+        case xl3DBarClustered:
+        case xl3DBarStacked:
+        case xl3DBarStacked100:
+        case xlConeColClustered:
+        case xlConeColStacked:
+        case xlConeColStacked100:
+        case xlConeBarClustered:
+        case xlConeBarStacked:
+        case xlConeBarStacked100:
+        case xlConeCol:
+        case xlPyramidColClustered:
+        case xlPyramidColStacked:
+        case xlPyramidColStacked100:
+        case xlPyramidBarClustered:
+        case xlPyramidBarStacked:
+        case xlPyramidBarStacked100:
+        case xlPyramidCol:
+        case xlCylinderColClustered:
+        case xlCylinderColStacked:
+        case xlCylinderColStacked100:
+        case xlCylinderBarClustered:
+        case xlCylinderBarStacked:
+        case xlCylinderBarStacked100:
+        case xlCylinderCol:
+        case xlSurface: // not possible
+        case xlSurfaceWireframe:
+        case xlSurfaceTopView:
+        case xlSurfaceTopViewWireframe:
+            setDiagram( "com.sun.star.chart.BarDiagram");
+            break;
+        case xlLine:
+        case xl3DLine:
+        case xlLineStacked:
+        case xlLineStacked100:
+        case xlLineMarkers:
+        case xlLineMarkersStacked:
+        case xlLineMarkersStacked100:
+            setDiagram( "com.sun.star.chart.LineDiagram");
+            break;
+        case xl3DArea:
+        case xlArea:
+        case xlAreaStacked:
+        case xlAreaStacked100:
+        case xl3DAreaStacked:
+        case xl3DAreaStacked100:
+            setDiagram( "com.sun.star.chart.AreaDiagram" );
+            break;
+        case xlDoughnut:
+        case xlDoughnutExploded:
+            setDiagram( "com.sun.star.chart.DonutDiagram" );
+            break;
+        case xlStockHLC:
+        case xlStockOHLC:
+        case xlStockVHLC:
+        case xlStockVOHLC:
+            setDiagram( "com.sun.star.chart.StockDiagram");
+            mxDiagramPropertySet->setPropertyValue( UPDOWN, uno::makeAny((_nChartType == xlStockOHLC) || (_nChartType == xlStockVOHLC)));
+            mxDiagramPropertySet->setPropertyValue( VOLUME, uno::makeAny((_nChartType == xlStockVHLC) || (_nChartType == xlStockVOHLC)));
+            break;
+
+        case xlPieOfPie:                            // not possible
+        case xlPieExploded: // SegmentOffset on ChartDataPointProperties -> get from XDiagram //How does Excel do this?
+        case xl3DPieExploded:
+        case xl3DPie:
+        case xlPie:
+        case xlBarOfPie:                            // not possible (Zoom pie)
+            setDiagram( "com.sun.star.chart.PieDiagram");
+            break;
+
+        case xlRadar:
+        case xlRadarMarkers:
+        case xlRadarFilled:
+            setDiagram( "com.sun.star.chart.NetDiagram");
+            break;
+        case xlXYScatter:
+        case xlBubble:                      // not possible
+        case xlBubble3DEffect:              // not possible
+        case xlXYScatterLines:
+        case xlXYScatterLinesNoMarkers:
+        case xlXYScatterSmooth:
+        case xlXYScatterSmoothNoMarkers:
+            setDiagram( "com.sun.star.chart.XYDiagram");
+            switch(_nChartType)
+            {
+                case xlXYScatter:
+                case xlBubble:                      // not possible
+                case xlBubble3DEffect:              // not possible
+                    mxDiagramPropertySet->setPropertyValue(LINES, uno::makeAny( false ));
+                    break;
+                case xlXYScatterLines:
+                case xlXYScatterLinesNoMarkers:
+                    mxDiagramPropertySet->setPropertyValue(LINES, uno::makeAny( true ));
+                    break;
+                case xlXYScatterSmooth:
+                case xlXYScatterSmoothNoMarkers:
+                    mxDiagramPropertySet->setPropertyValue(SPLINETYPE, uno::makeAny( sal_Int32(1)));
+                    break;
+                default:
+                    break;
+            }
+            break;
+        default:
+            throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_CONVERSION), OUString() );
+        }
+
+        switch (_nChartType)
+        {
+        case xlLineMarkers:
+        case xlLineMarkersStacked:
+        case xlLineMarkersStacked100:
+        case xlRadarMarkers:
+        case xlXYScatterLines:
+        case xlXYScatterSmooth:
+        case xlXYScatter:
+        case xlBubble:                      // not possible
+        case xlBubble3DEffect:              // not possible
+            mxDiagramPropertySet->setPropertyValue(SYMBOLTYPE, uno::makeAny( chart::ChartSymbolType::AUTO));
+            break;
+        default:
+            if (mxDiagramPropertySet->getPropertySetInfo()->hasPropertyByName(SYMBOLTYPE))
+            {
+                mxDiagramPropertySet->setPropertyValue(SYMBOLTYPE, uno::makeAny(chart::ChartSymbolType::NONE));
+            }
+            break;
+        }
+
+        switch (_nChartType)
+        {
+        case xlConeCol:
+        case xlPyramidCol:
+        case xlCylinderCol:
+        case xl3DColumn:
+        case xlSurface:                         // not possible
+        case xlSurfaceWireframe:
+        case xlSurfaceTopView:
+        case xlSurfaceTopViewWireframe:
+            mxDiagramPropertySet->setPropertyValue(DEEP,uno::makeAny( true ));
+            break;
+        default:
+                if (mxDiagramPropertySet->getPropertySetInfo()->hasPropertyByName(DEEP))
+                {
+                    mxDiagramPropertySet->setPropertyValue(DEEP, uno::makeAny( false));
+                }
+                break;
+        }
+
+        switch (_nChartType)
+        {
+                case xlConeColClustered:
+                case xlConeColStacked:
+                case xlConeColStacked100:
+                case xlConeBarClustered:
+                case xlConeBarStacked:
+                case xlConeBarStacked100:
+                case xlConeCol:
+                        mxDiagramPropertySet->setPropertyValue(SOLIDTYPE, uno::makeAny(chart::ChartSolidType::CONE));
+                        break;
+                case xlPyramidColClustered:
+                case xlPyramidColStacked:
+                case xlPyramidColStacked100:
+                case xlPyramidBarClustered:
+                case xlPyramidBarStacked:
+                case xlPyramidBarStacked100:
+                case xlPyramidCol:
+                        mxDiagramPropertySet->setPropertyValue(SOLIDTYPE, uno::makeAny(chart::ChartSolidType::PYRAMID));
+                        break;
+                case xlCylinderColClustered:
+                case xlCylinderColStacked:
+                case xlCylinderColStacked100:
+                case xlCylinderBarClustered:
+                case xlCylinderBarStacked:
+                case xlCylinderBarStacked100:
+                case xlCylinderCol:
+                        mxDiagramPropertySet->setPropertyValue(SOLIDTYPE, uno::makeAny(chart::ChartSolidType::CYLINDER));
+                        break;
+                default:
+                    if (mxDiagramPropertySet->getPropertySetInfo()->hasPropertyByName(SOLIDTYPE))
+                    {
+                            mxDiagramPropertySet->setPropertyValue(SOLIDTYPE, uno::makeAny(chart::ChartSolidType::RECTANGULAR_SOLID));
+                    }
+                    break;
+        }
+
+        switch ( _nChartType)
+        {
+            case xlConeCol:
+            case xlConeColClustered:
+            case xlConeColStacked:
+            case xlConeColStacked100:
+            case xlPyramidColClustered:
+            case xlPyramidColStacked:
+            case xlPyramidColStacked100:
+            case xlCylinderColClustered:
+            case xlCylinderColStacked:
+            case xlCylinderColStacked100:
+            case xlColumnClustered:
+            case xlColumnStacked:
+            case xlColumnStacked100:
+            case xl3DColumnClustered:
+            case xl3DColumnStacked:
+            case xl3DColumnStacked100:
+            case xlSurface: // not possible
+            case xlSurfaceWireframe:
+            case xlSurfaceTopView:
+            case xlSurfaceTopViewWireframe:
+                mxDiagramPropertySet->setPropertyValue(VERTICAL, uno::makeAny( true));
+                break;
+            default:
+                if (mxDiagramPropertySet->getPropertySetInfo()->hasPropertyByName(VERTICAL))
+                {
+                    mxDiagramPropertySet->setPropertyValue(VERTICAL, uno::makeAny(false));
+                }
+                break;
+        }
+
+        switch (_nChartType)
+        {
+            case xlColumnStacked:
+            case xl3DColumnStacked:
+            case xlBarStacked:
+            case xl3DBarStacked:
+            case xlLineStacked:
+            case xlLineMarkersStacked:
+            case xlAreaStacked:
+            case xl3DAreaStacked:
+            case xlCylinderColStacked:
+            case xlCylinderBarStacked:
+            case xlConeColStacked:
+            case xlConeBarStacked:
+            case xlPyramidColStacked:
+            case xlPyramidBarStacked:
+                mxDiagramPropertySet->setPropertyValue(PERCENT, uno::makeAny( false ));
+                mxDiagramPropertySet->setPropertyValue(STACKED, uno::makeAny( true ));
+                break;
+            case xlPyramidColStacked100:
+            case xlPyramidBarStacked100:
+            case xlConeColStacked100:
+            case xlConeBarStacked100:
+            case xlCylinderBarStacked100:
+            case xlCylinderColStacked100:
+            case xl3DAreaStacked100:
+            case xlLineMarkersStacked100:
+            case xlAreaStacked100:
+            case xlLineStacked100:
+            case xl3DBarStacked100:
+            case xlBarStacked100:
+            case xl3DColumnStacked100:
+            case xlColumnStacked100:
+                mxDiagramPropertySet->setPropertyValue(STACKED, uno::makeAny( true));
+                mxDiagramPropertySet->setPropertyValue(PERCENT, uno::makeAny( true ));
+                break;
+            default:
+                mxDiagramPropertySet->setPropertyValue(PERCENT, uno::makeAny( false));
+                mxDiagramPropertySet->setPropertyValue(STACKED, uno::makeAny( false));
+                break;
+        }
+        switch (_nChartType)
+        {
+            case xl3DArea:
+            case xl3DAreaStacked:
+            case xl3DAreaStacked100:
+            case xl3DBarClustered:
+            case xl3DBarStacked:
+            case xl3DBarStacked100:
+            case xl3DColumn:
+            case xl3DColumnClustered:
+            case xl3DColumnStacked:
+            case xl3DColumnStacked100:
+            case xl3DLine:
+            case xl3DPie:
+            case xl3DPieExploded:
+            case xlConeColClustered:
+            case xlConeColStacked:
+            case xlConeColStacked100:
+            case xlConeBarClustered:
+            case xlConeBarStacked:
+            case xlConeBarStacked100:
+            case xlConeCol:
+            case xlPyramidColClustered:
+            case xlPyramidColStacked:
+            case xlPyramidColStacked100:
+            case xlPyramidBarClustered:
+            case xlPyramidBarStacked:
+            case xlPyramidBarStacked100:
+            case xlPyramidCol:
+            case xlCylinderColClustered:
+            case xlCylinderColStacked:
+            case xlCylinderColStacked100:
+            case xlCylinderBarClustered:
+            case xlCylinderBarStacked:
+            case xlCylinderBarStacked100:
+            case xlCylinderCol:
+                mxDiagramPropertySet->setPropertyValue(DIM3D, uno::makeAny( true));
+                break;
+            default:
+                if (mxDiagramPropertySet->getPropertySetInfo()->hasPropertyByName(DIM3D))
+                {
+                    mxDiagramPropertySet->setPropertyValue(DIM3D, uno::makeAny( false));
+                }
+                break;
+        }
+    }
+    catch ( const uno::Exception& )
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+void SAL_CALL
+ScVbaChart::Activate()
+{
+    // #TODO how are Chart sheets handled ( I know we don't even consider
+    // them in the worksheets/sheets collections ), but...???
+    // note: in vba for excel the parent of a Chart sheet is a workbook,
+    // e.g. 'ThisWorkbook'
+    uno::Reference< XHelperInterface > xParent( getParent() );
+    ScVbaChartObject* pChartObj = static_cast< ScVbaChartObject* >( xParent.get() );
+    if ( !pChartObj )
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), "no ChartObject as parent" );
+
+    pChartObj->Activate();
+
+}
+
+void SAL_CALL
+ScVbaChart::setSourceData( const css::uno::Reference< ::ooo::vba::excel::XRange >& _xCalcRange, const css::uno::Any& _aPlotBy )
+{
+    try
+    {
+        uno::Sequence< table::CellRangeAddress > aRangeAddresses(1);
+        table::CellRangeAddress aSingleRangeAddress;
+
+        uno::Reference< sheet::XCellRangeAddressable > xAddressable( _xCalcRange->getCellRange(), uno::UNO_QUERY_THROW );
+        aSingleRangeAddress = xAddressable->getRangeAddress();
+
+        aRangeAddresses[0] = aSingleRangeAddress;
+
+        mxTableChart->setRanges(aRangeAddresses);
+
+        bool bsetRowHeaders = false;
+        bool bsetColumnHeaders = false;
+
+        ScVbaRange* pRange = static_cast< ScVbaRange* >( _xCalcRange.get() );
+        if ( pRange )
+        {
+            ScDocument& rDoc = pRange->getScDocument();
+            bsetRowHeaders = rDoc.HasRowHeader(  static_cast< SCCOL >( aSingleRangeAddress.StartColumn ), static_cast< SCROW >( aSingleRangeAddress.StartRow ), static_cast< SCCOL >( aSingleRangeAddress.EndColumn ), static_cast< SCROW >( aSingleRangeAddress.EndRow ), static_cast< SCTAB >( aSingleRangeAddress.Sheet ) );
+            bsetColumnHeaders = rDoc.HasColHeader(  static_cast< SCCOL >( aSingleRangeAddress.StartColumn ), static_cast< SCROW >( aSingleRangeAddress.StartRow ), static_cast< SCCOL >( aSingleRangeAddress.EndColumn ), static_cast< SCROW >( aSingleRangeAddress.EndRow ), static_cast< SCTAB >( aSingleRangeAddress.Sheet ));
+        }
+        mxTableChart->setHasRowHeaders(bsetRowHeaders);
+        mxTableChart->setHasColumnHeaders(bsetColumnHeaders);
+
+        if ((!bsetColumnHeaders) || (!bsetRowHeaders))
+        {
+            uno::Reference< chart::XChartDataArray > xChartDataArray( mxChartDocument->getData(), uno::UNO_QUERY_THROW );
+            if (!bsetColumnHeaders)
+            {
+                xChartDataArray->setColumnDescriptions( getDefaultSeriesDescriptions(xChartDataArray->getColumnDescriptions().getLength() ));
+            }
+            if (!bsetRowHeaders)
+            {
+                xChartDataArray->setRowDescriptions(getDefaultSeriesDescriptions(xChartDataArray->getRowDescriptions().getLength() ));
+            }
+        }
+
+        if ( _aPlotBy.hasValue() )
+        {
+            sal_Int32 nVal = 0;
+            _aPlotBy >>= nVal;
+            setPlotBy( nVal );
+        }
+        else
+        {
+            sal_Int32 nRows = aSingleRangeAddress.EndRow - aSingleRangeAddress.StartRow;
+            sal_Int32 nCols = aSingleRangeAddress.EndColumn - aSingleRangeAddress.StartColumn;
+            // AutoDetect emulation
+            if ( nRows > nCols )
+                setPlotBy( xlColumns );
+            else if ( nRows <= nCols )
+                setPlotBy( xlRows );
+        }
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+uno::Sequence< OUString >
+ScVbaChart::getDefaultSeriesDescriptions( sal_Int32 _nCount )
+{
+    uno::Sequence< OUString > sDescriptions ( _nCount );
+    std::generate_n(sDescriptions.begin(), _nCount,
+        [i = 1]() mutable -> OUString { return DEFAULTSERIESPREFIX + OUString::number(i++); });
+    return sDescriptions;
+}
+
+void
+ScVbaChart::setDefaultChartType()
+{
+    setChartType( xlColumnClustered );
+}
+
+void
+ScVbaChart::setPlotBy( ::sal_Int32 _nPlotBy )
+{
+    try
+    {
+        if ( !mxDiagramPropertySet.is() )
+            setDefaultChartType();
+        switch (_nPlotBy)
+        {
+            case xlRows:
+                mxDiagramPropertySet->setPropertyValue( DATAROWSOURCE,  uno::makeAny( chart::ChartDataRowSource_ROWS ) );
+                break;
+            case xlColumns:
+                mxDiagramPropertySet->setPropertyValue( DATAROWSOURCE, uno::makeAny( chart::ChartDataRowSource_COLUMNS) );
+                break;
+            default:
+                throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+        }
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+::sal_Int32 SAL_CALL
+ScVbaChart::getPlotBy(  )
+{
+    try
+    {
+        chart::ChartDataRowSource aChartDataRowSource;
+        mxDiagramPropertySet->getPropertyValue(DATAROWSOURCE) >>= aChartDataRowSource;
+        if (aChartDataRowSource == chart::ChartDataRowSource_COLUMNS)
+        {
+            return xlColumns;
+        }
+        else
+        {
+            return xlRows;
+        }
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+void
+ScVbaChart::setDiagram( const OUString& _sDiagramType )
+{
+    try
+    {
+        uno::Reference< lang::XMultiServiceFactory > xMSF( mxChartDocument, uno::UNO_QUERY_THROW );
+        uno::Reference< chart::XDiagram > xDiagram( xMSF->createInstance( _sDiagramType ), uno::UNO_QUERY_THROW  );
+        mxChartDocument->setDiagram( xDiagram );
+        mxDiagramPropertySet.set( xDiagram, uno::UNO_QUERY_THROW );
+    }
+    catch ( const uno::Exception& )
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+// #TODO find out why we have Location/getLocation? there is afaik no
+// Location property, just a Location function for the Chart object
+sal_Int32 SAL_CALL
+ScVbaChart::Location()
+{
+    return getLocation();
+}
+
+sal_Int32 SAL_CALL
+ScVbaChart::getLocation()
+{
+     return -1;
+}
+
+void SAL_CALL
+ScVbaChart::setLocation( ::sal_Int32 /*where*/, const css::uno::Any& /*Name*/ )
+{
+    // Helper api just stubs out the code <shrug>
+    // #TODO come back and make sense out of this
+//        String sheetName = null;
+//
+//        if ((name != null) && name instanceof String) {
+//            sheetName = (String) name;
+//        }
+//        XSpreadsheetDocument xShDoc = (XSpreadsheetDocument) UnoRuntime.queryInterface( XSpreadsheetDocument.class,getXModel() );
+//        com.sun.star.sheet.XSpreadsheets xSheets = xShDoc.Sheets();
+//
+//        switch (where) {
+//        case ClLocationType.clLocationAsObject_value: //{
+//
+//            if (sheetName == null) {
+//                DebugHelper.writeInfo("Can't embed in Chart without knowing SheetName");
+//                return;
+//            }
+//
+//            try {
+//                Any any = (Any) xSheets.getByName(sheetName);
+//                chartSheet = (XSpreadsheet) any.getObject();
+//
+//                // chartSheet = (XSpreadsheet) xSheets.getByName( sheetName );
+//            } catch (NoSuchElementException e) {
+//                // TODO Auto-generated catch block
+//                e.printStackTrace();
+//
+//                return;
+//            } catch (WrappedTargetException e) {
+//                // TODO Auto-generated catch block
+//                e.printStackTrace();
+//
+//                return;
+//            } catch (java.lang.Exception e) {
+//                e.printStackTrace();
+//            }
+//
+//            XTableChartsSupplier xTCS = (XTableChartsSupplier) UnoRuntime.queryInterface( XTableChartsSupplier.class, chartSheet);
+//            XTableCharts xTableCharts = xTCS.getCharts();
+//            XIndexAccess xIA = (XIndexAccess) UnoRuntime.queryInterface( XIndexAccess.class, xTableCharts);
+//            int numCharts = xIA.getCount();
+//            chartName = "Chart " + (numCharts + 1);
+//
+//            //}
+//            break;
+//
+//        case ClLocationType.clLocationAsNewSheet_value:
+//        case ClLocationType.clLocationAutomatic_value:default: //{
+//            chartName = "Chart 1"; // Since it's a new sheet, it's the first on it...
+//
+//            XIndexAccess xSheetIA = (XIndexAccess) UnoRuntime.queryInterface( XIndexAccess.class, xSheets);
+//
+//            short newSheetNum = (short) (xSheetIA.getCount() + 1);
+//
+//            if (sheetName == null){
+//                sheetName = "ChartSheet " + newSheetNum; // Why not?
+//            }
+//            // DPK TODO : Probably should use Sheets to create this!
+//            xSheets.insertNewByName(sheetName, newSheetNum);
+//
+//            try {
+//                chartSheet =
+//                    (XSpreadsheet) xSheets.getByName(sheetName);
+//            } catch (NoSuchElementException e) {
+//                // TODO Auto-generated catch block
+//                e.printStackTrace();
+//
+//                return;
+//            } catch (WrappedTargetException e) {
+//                // TODO Auto-generated catch block
+//                e.printStackTrace();
+//
+//                return;
+//            }
+//
+//            //}
+//            break;
+//        }
+//
+//        // Last thing should be a call to createChartForReal(), one of them
+//        // should succeed.
+//        createChartForReal();
+
+}
+
+sal_Bool SAL_CALL
+ScVbaChart::getHasTitle(  )
+{
+    bool bHasTitle = false;
+    try
+    {
+        mxChartPropertySet->getPropertyValue(HASMAINTITLE) >>= bHasTitle;
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+    return bHasTitle;
+}
+
+void SAL_CALL
+ScVbaChart::setHasTitle( sal_Bool bTitle )
+{
+    try
+    {
+        mxChartPropertySet->setPropertyValue(HASMAINTITLE, uno::makeAny( bTitle ));
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+
+}
+
+sal_Bool SAL_CALL
+ScVbaChart::getHasLegend(  )
+{
+    bool bHasLegend = false;
+    try
+    {
+        mxChartPropertySet->getPropertyValue(HASLEGEND) >>= bHasLegend;
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+    return bHasLegend;
+}
+
+void SAL_CALL
+ScVbaChart::setHasLegend( sal_Bool bLegend )
+{
+    try
+    {
+        mxChartPropertySet->setPropertyValue(HASLEGEND, uno::makeAny(bLegend));
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+uno::Reference< excel::XChartTitle > SAL_CALL
+ScVbaChart::getChartTitle(  )
+{
+    uno::Reference< drawing::XShape > xTitleShape = mxChartDocument->getTitle();
+    // #TODO check parent
+    return new ScVbaChartTitle(this, mxContext, xTitleShape);
+}
+
+uno::Any SAL_CALL
+ScVbaChart::Axes( const uno::Any& Type, const uno::Any& AxisGroup )
+{
+    // mmm chart probably is the parent, #TODO check parent
+    uno::Reference< excel::XAxes > xAxes = new ScVbaAxes( this, mxContext, this );
+    if ( !Type.hasValue() )
+        return uno::makeAny( xAxes );
+    return xAxes->Item( Type, AxisGroup );
+}
+bool
+ScVbaChart::is3D()
+{
+    // #TODO perhaps provide limited Debughelper functionality
+    bool is3d = false;
+    mxDiagramPropertySet->getPropertyValue(DIM3D) >>= is3d;
+    return is3d;
+}
+
+sal_Int32
+ScVbaChart::getStackedType( sal_Int32 _nStacked, sal_Int32 _n100PercentStacked, sal_Int32 _nUnStacked )
+{
+    // #TODO perhaps provide limited Debughelper functionality
+    if (isStacked())
+    {
+        if (is100PercentStacked())
+            return _n100PercentStacked;
+        else
+            return _nStacked;
+    }
+    else
+        return _nUnStacked;
+}
+
+bool
+ScVbaChart::isStacked()
+{
+    // #TODO perhaps provide limited Debughelper functionality
+    bool bStacked = false;
+    mxDiagramPropertySet->getPropertyValue(STACKED) >>= bStacked;
+    return bStacked;
+}
+
+bool
+ScVbaChart::is100PercentStacked()
+{
+    // #TODO perhaps provide limited Debughelper functionality
+    bool b100Percent = false;
+    mxDiagramPropertySet->getPropertyValue(PERCENT) >>= b100Percent;
+    return b100Percent;
+}
+
+sal_Int32
+ScVbaChart::getSolidType(sal_Int32 _nDeep, sal_Int32 _nVertiStacked, sal_Int32 _nVerti100PercentStacked, sal_Int32 _nVertiUnStacked, sal_Int32 _nHoriStacked, sal_Int32 _nHori100PercentStacked, sal_Int32 _nHoriUnStacked)
+{
+    try
+    {
+        bool bIsVertical = true;
+        mxDiagramPropertySet->getPropertyValue(VERTICAL) >>= bIsVertical;
+        bool bIsDeep = false;
+        mxDiagramPropertySet->getPropertyValue(DEEP) >>= bIsDeep;
+
+        if (bIsDeep)
+        {
+            return _nDeep;
+        }
+        else
+        {
+            if (bIsVertical)
+            {
+                return getStackedType(_nVertiStacked, _nVerti100PercentStacked, _nVertiUnStacked);
+            }
+            else
+            {
+                return getStackedType(_nHoriStacked, _nHori100PercentStacked, _nHoriUnStacked);
+            }
+        }
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+sal_Int32
+ScVbaChart::getStockUpDownValue(sal_Int32 _nUpDown, sal_Int32 _nNotUpDown)
+{
+    try
+    {
+        bool bUpDown = false;
+        mxDiagramPropertySet->getPropertyValue(UPDOWN) >>= bUpDown;
+        if (bUpDown)
+        {
+            return _nUpDown;
+        }
+        else
+        {
+            return _nNotUpDown;
+        }
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+}
+
+bool
+ScVbaChart::hasMarkers()
+{
+    bool bHasMarkers = false;
+    try
+    {
+        sal_Int32 nSymbol=0;
+        mxDiagramPropertySet->getPropertyValue(SYMBOLTYPE) >>= nSymbol;
+        bHasMarkers = nSymbol != chart::ChartSymbolType::NONE;
+    }
+    catch (const uno::Exception&)
+    {
+        throw script::BasicErrorException( OUString(), uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_BASIC_METHOD_FAILED), OUString() );
+    }
+    return bHasMarkers;
+}
+
+sal_Int32
+ScVbaChart::getMarkerType(sal_Int32 _nWithMarkers, sal_Int32 _nWithoutMarkers)
+{
+    if (hasMarkers())
+        return _nWithMarkers;
+    return _nWithoutMarkers;
+}
+
+void
+ScVbaChart::assignDiagramAttributes()
+{
+    xAxisXSupplier.set( mxDiagramPropertySet, uno::UNO_QUERY_THROW );
+    xAxisYSupplier.set( mxDiagramPropertySet, uno::UNO_QUERY_THROW );
+    xAxisZSupplier.set( mxDiagramPropertySet, uno::UNO_QUERY_THROW );
+    xTwoAxisXSupplier.set( mxDiagramPropertySet, uno::UNO_QUERY_THROW );
+    xTwoAxisYSupplier.set( mxDiagramPropertySet, uno::UNO_QUERY_THROW );
+}
+
+uno::Reference< beans::XPropertySet >
+ScVbaChart::getAxisPropertySet(sal_Int32 _nAxisType, sal_Int32 _nAxisGroup)
+{
+    assignDiagramAttributes();
+    uno::Reference< beans::XPropertySet > xAxisProps;
+    switch(_nAxisType)
+    {
+        case xlCategory:
+            if (_nAxisGroup == xlPrimary)
+            {
+                xAxisProps = xAxisXSupplier->getXAxis();
+            }
+            else if (_nAxisGroup == xlSecondary)
+            {
+                xAxisProps = xTwoAxisXSupplier->getSecondaryXAxis();
+            }
+            break;
+        case xlSeriesAxis:
+            xAxisProps = xAxisZSupplier->getZAxis();
+            break;
+        case xlValue:
+            if (_nAxisGroup == xlPrimary)
+                xAxisProps = xAxisYSupplier->getYAxis();
+            else if (_nAxisGroup == xlSecondary)
+                xAxisProps = xTwoAxisYSupplier->getSecondaryYAxis();
+            break;
+        default:
+            return xAxisProps;
+        }
+    return xAxisProps;
+}
+
+OUString
+ScVbaChart::getServiceImplName()
+{
+    return "ScVbaChart";
+}
+
+uno::Sequence< OUString >
+ScVbaChart::getServiceNames()
+{
+    static uno::Sequence< OUString > const aServiceNames
+    {
+        "ooo.vba.excel.Chart"
+    };
+    return aServiceNames;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */