Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 515 insertions, 0 deletions

diff --git a/solenv/bin/modules/installer/windows/admin.pm b/solenv/bin/modules/installer/windows/admin.pm
new file mode 100644
index 000000000..27e4ba7c3
--- /dev/null
+++ b/solenv/bin/modules/installer/windows/admin.pm
@@ -0,0 +1,515 @@
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+#   Licensed to the Apache Software Foundation (ASF) under one or more
+#   contributor license agreements. See the NOTICE file distributed
+#   with this work for additional information regarding copyright
+#   ownership. The ASF licenses this file to you under the Apache
+#   License, Version 2.0 (the "License"); you may not use this file
+#   except in compliance with the License. You may obtain a copy of
+#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+package installer::windows::admin;
+
+use File::Copy;
+use installer::exiter;
+use installer::files;
+use installer::globals;
+use installer::pathanalyzer;
+use installer::systemactions;
+use installer::worker;
+use installer::windows::idtglobal;
+
+#################################################################################
+# Unpacking cabinet files with expand
+#################################################################################
+
+sub unpack_cabinet_file
+{
+    my ($cabfilename, $unpackdir) = @_;
+
+    my $infoline = "Unpacking cabinet file: $cabfilename\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    my $expandfile = "expand.exe";  # Has to be in the path
+
+    # expand.exe has to be located in the system directory.
+    # Cygwin has another tool expand.exe, that converts tabs to spaces. This cannot be used of course.
+    # But this wrong expand.exe is typically in the PATH before this expand.exe, to unpack
+    # cabinet files.
+
+    if ( $^O =~ /cygwin/i )
+    {
+        $expandfile = qx(cygpath -u "$ENV{WINDIR}"/System32/expand.exe);
+        chomp $expandfile;
+    }
+
+    my $expandlogfile = $unpackdir . $installer::globals::separator . "expand.log";
+
+    # exclude cabinet file
+
+    my $systemcall = "";
+    if ( $^O =~ /cygwin/i ) {
+        my $localunpackdir = qx{cygpath -w "$unpackdir"};
+        chomp ($localunpackdir);
+        $localunpackdir =~ s/\\/\\\\/g;
+        $cabfilename =~ s/\\/\\\\/g;
+        $cabfilename =~ s/\s*$//g;
+        $systemcall = $expandfile . " " . $cabfilename . " -F:\* " . $localunpackdir . " \> " . $expandlogfile;
+    }
+    else
+    {
+        $systemcall = $expandfile . " " . $cabfilename . " -F:\* " . $unpackdir . " \> " . $expandlogfile;
+    }
+
+    my $returnvalue = system($systemcall);
+    $infoline = "Systemcall: $systemcall\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    if ($returnvalue)
+    {
+        $infoline = "ERROR: Could not execute $systemcall !\n";
+        push( @installer::globals::logfileinfo, $infoline);
+        installer::exiter::exit_program("ERROR: Could not extract cabinet file: $mergemodulehash->{'cabinetfile'} !", "change_file_table");
+    }
+    else
+    {
+        $infoline = "Success: Executed $systemcall successfully!\n";
+        push( @installer::globals::logfileinfo, $infoline);
+    }
+}
+
+#################################################################################
+# Extracting tables from msi database
+#################################################################################
+
+sub extract_tables_from_pcpfile
+{
+    my ($fullmsidatabasepath, $workdir, $tablelist) = @_;
+
+    my $msidb = "msidb.exe";    # Has to be in the path
+    my $infoline = "";
+    my $systemcall = "";
+    my $returnvalue = "";
+
+    my $localfullmsidatabasepath = $fullmsidatabasepath;
+
+    # Export of all tables by using "*"
+
+    if ( $^O =~ /cygwin/i ) {
+        # Copying the msi database locally guarantees the format of the directory.
+        # Otherwise it is defined in the file of UPDATE_DATABASE_LISTNAME
+
+        my $msifilename = $localfullmsidatabasepath;
+        installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$msifilename);
+        my $destdatabasename = $workdir . $installer::globals::separator . $msifilename;
+        installer::systemactions::copy_one_file($localfullmsidatabasepath, $destdatabasename);
+        $localfullmsidatabasepath = $destdatabasename;
+
+        chomp( $localfullmsidatabasepath = qx{cygpath -w "$localfullmsidatabasepath"} );
+        chomp( $workdir = qx{cygpath -w "$workdir"} );
+
+        # msidb.exe really wants backslashes. (And double escaping because system() expands the string.)
+        $localfullmsidatabasepath =~ s/\\/\\\\/g;
+        $workdir =~ s/\\/\\\\/g;
+
+        # and if there are still slashes, they also need to be double backslash
+        $localfullmsidatabasepath =~ s/\//\\\\/g;
+        $workdir =~ s/\//\\\\/g;
+    }
+
+    $systemcall = $msidb . " -d " . $localfullmsidatabasepath . " -f " . $workdir . " -e $tablelist";
+    $returnvalue = system($systemcall);
+
+    $infoline = "Systemcall: $systemcall\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    if ($returnvalue)
+    {
+        $infoline = "ERROR: Could not execute $systemcall !\n";
+        push( @installer::globals::logfileinfo, $infoline);
+        installer::exiter::exit_program("ERROR: Could not exclude tables from pcp file: $localfullmsidatabasepath !", "extract_tables_from_pcpfile");
+    }
+    else
+    {
+        $infoline = "Success: Executed $systemcall successfully!\n";
+        push( @installer::globals::logfileinfo, $infoline);
+    }
+}
+
+################################################################################
+# Analyzing the content of Directory.idt
+#################################################################################
+
+sub analyze_directory_file
+{
+    my ($filecontent) = @_;
+
+    my %table = ();
+
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+    {
+        if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+        if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\s*$/ )
+        {
+            my $dir = $1;
+            my $parent = $2;
+            my $name = $3;
+
+            if ( $name =~ /^\s*(.*?)\s*\:\s*(.*?)\s*$/ ) { $name = $2; }
+            if ( $name =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $name = $2; }
+
+            my %helphash = ();
+            $helphash{'Directory_Parent'} = $parent;
+            $helphash{'DefaultDir'} = $name;
+            $table{$dir} = \%helphash;
+        }
+    }
+
+    return \%table;
+}
+
+#################################################################################
+# Analyzing the content of Component.idt
+#################################################################################
+
+sub analyze_component_file
+{
+    my ($filecontent) = @_;
+
+    my %table = ();
+
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+    {
+        if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+        if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+        {
+            my $component = $1;
+            my $dir = $3;
+
+            $table{$component} = $dir;
+        }
+    }
+
+    return \%table;
+}
+
+#################################################################################
+# Analyzing the content of File.idt
+#################################################################################
+
+sub analyze_file_file
+{
+    my ($filecontent) = @_;
+
+    my %table = ();
+    my %fileorder = ();
+    my $maxsequence = 0;
+
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+    {
+        if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+        if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+        {
+            my $file = $1;
+            my $comp = $2;
+            my $filename = $3;
+            my $sequence = $8;
+
+            if ( $filename =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $filename = $2; }
+
+            my %helphash = ();
+            $helphash{'Component'} = $comp;
+            $helphash{'FileName'} = $filename;
+            $helphash{'Sequence'} = $sequence;
+
+            $table{$file} = \%helphash;
+
+            $fileorder{$sequence} = $file;
+
+            if ( $sequence > $maxsequence ) { $maxsequence = $sequence; }
+        }
+    }
+
+    return (\%table, \%fileorder, $maxsequence);
+}
+
+####################################################################################
+# Recursively creating the directory tree
+####################################################################################
+
+sub create_directory_tree
+{
+    my ($parent, $pathcollector, $fulldir, $dirhash) = @_;
+
+    foreach my $dir ( keys %{$dirhash} )
+    {
+        if (( $dirhash->{$dir}->{'Directory_Parent'} eq $parent ) && ( $dirhash->{$dir}->{'DefaultDir'} ne "." ))
+        {
+            my $dirname = $dirhash->{$dir}->{'DefaultDir'};
+            # Create the directory
+            my $newdir = $fulldir . $installer::globals::separator . $dirname;
+            if ( ! -f $newdir ) { mkdir $newdir; }
+            # Saving in collector
+            $pathcollector->{$dir} = $newdir;
+            # Iteration
+            create_directory_tree($dir, $pathcollector, $newdir, $dirhash);
+        }
+    }
+}
+
+####################################################################################
+# Creating the directory tree
+####################################################################################
+
+sub create_directory_structure
+{
+    my ($dirhash, $targetdir) = @_;
+
+    my %fullpathhash = ();
+
+    my @startparents = ("TARGETDIR", "INSTALLLOCATION");
+
+    foreach $dir (@startparents) { create_directory_tree($dir, \%fullpathhash, $targetdir, $dirhash); }
+
+    # Also adding the paths of the startparents
+    foreach $dir (@startparents)
+    {
+        if ( ! exists($fullpathhash{$dir}) ) { $fullpathhash{$dir} = $targetdir; }
+    }
+
+    return \%fullpathhash;
+}
+
+####################################################################################
+# Copying files into installation set
+####################################################################################
+
+sub copy_files_into_directory_structure
+{
+    my ($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash) = @_;
+
+    for ( my $i = 1; $i <= $maxsequence; $i++ )
+    {
+        if ( exists($fileorder->{$i}) )
+        {
+            my $file = $fileorder->{$i};
+            if ( ! exists($filehash->{$file}->{'Component'}) ) { installer::exiter::exit_program("ERROR: Did not find component for file: \"$file\".", "copy_files_into_directory_structure"); }
+            my $component = $filehash->{$file}->{'Component'};
+            if ( ! exists($componenthash->{$component}) ) { installer::exiter::exit_program("ERROR: Did not find directory for component: \"$component\".", "copy_files_into_directory_structure"); }
+            my $dirname = $componenthash->{$component};
+            if ( ! exists($fullpathhash->{$dirname}) ) { installer::exiter::exit_program("ERROR: Did not find full directory path for dir: \"$dirname\".", "copy_files_into_directory_structure"); }
+            my $destdir = $fullpathhash->{$dirname};
+            if ( ! exists($filehash->{$file}->{'FileName'}) ) { installer::exiter::exit_program("ERROR: Did not find \"FileName\" for file: \"$file\".", "copy_files_into_directory_structure"); }
+            my $destfile = $filehash->{$file}->{'FileName'};
+
+            $destfile = $destdir . $installer::globals::separator . $destfile;
+            my $sourcefile = $unpackdir . $installer::globals::separator . $file;
+
+            if ( ! -f $sourcefile )
+            {
+                # It is possible, that this was an unpacked file
+                # Looking in the dirhash, to find the subdirectory in the installation set (the id is $dirname)
+                # subdir is not recursively analyzed, only one directory.
+
+                my $oldsourcefile = $sourcefile;
+                my $subdir = "";
+                if ( exists($dirhash->{$dirname}->{'DefaultDir'}) ) { $subdir = $dirhash->{$dirname}->{'DefaultDir'} . $installer::globals::separator; }
+                my $realfilename = $filehash->{$file}->{'FileName'};
+                my $localinstalldir = $installdir;
+
+                $localinstalldir =~ s/\\\s*$//;
+                $localinstalldir =~ s/\/\s*$//;
+
+                $sourcefile = $localinstalldir . $installer::globals::separator . $subdir . $realfilename;
+
+                if ( ! -f $sourcefile )
+                {
+                    installer::exiter::exit_program("ERROR: File not found: \"$oldsourcefile\" (or \"$sourcefile\").", "copy_files_into_directory_structure");
+                }
+            }
+
+            my $copyreturn = copy($sourcefile, $destfile);
+
+            if ( ! $copyreturn) # only logging problems
+            {
+                my $infoline = "ERROR: Could not copy $sourcefile to $destfile (insufficient disc space for $destfile ?)\n";
+                $returnvalue = 0;
+                push(@installer::globals::logfileinfo, $infoline);
+                installer::exiter::exit_program($infoline, "copy_files_into_directory_structure");
+            }
+        }
+    }
+}
+
+
+###############################################################
+# Setting the time string for the
+# Summary Information stream in the
+# msi database of the admin installations.
+###############################################################
+
+sub get_sis_time_string
+{
+    # Syntax: <yyyy/mm/dd hh:mm:ss>
+    my $second = (localtime())[0];
+    my $minute = (localtime())[1];
+    my $hour = (localtime())[2];
+    my $day = (localtime())[3];
+    my $month = (localtime())[4];
+    my $year = 1900 + (localtime())[5];
+
+    $month++; # zero based month
+
+    if ( $second < 10 ) { $second = "0" . $second; }
+    if ( $minute < 10 ) { $minute = "0" . $minute; }
+    if ( $hour < 10 ) { $hour = "0" . $hour; }
+    if ( $day < 10 ) { $day = "0" . $day; }
+    if ( $month < 10 ) { $month = "0" . $month; }
+
+    my $timestring = $year . "/" . $month . "/" . $day . " " . $hour . ":" . $minute . ":" . $second;
+
+    return $timestring;
+}
+
+###############################################################
+# Writing content of administrative installations into
+# Summary Information Stream of msi database.
+# This is required for example for following
+# patch processes using Windows Installer service.
+###############################################################
+
+sub write_sis_info
+{
+    my ($msidatabase) = @_ ;
+
+    if ( ! -f $msidatabase ) { installer::exiter::exit_program("ERROR: Cannot find file $msidatabase", "write_sis_info"); }
+
+    my $msiinfo = "msiinfo.exe";    # Has to be in the path
+    my $infoline = "";
+    my $systemcall = "";
+    my $returnvalue = "";
+
+    # Required setting for administrative installations:
+    # -w 4   (source files are unpacked),  wordcount
+    # -s <date of admin installation>, LastPrinted, Syntax: <yyyy/mm/dd hh:mm:ss>
+    # -l <person_making_admin_installation>, LastSavedBy
+
+    my $wordcount = 4;  # Unpacked files
+    my $lastprinted = get_sis_time_string();
+    my $lastsavedby = "Installer";
+
+    my $localmsidatabase = $msidatabase;
+
+    if( $^O =~ /cygwin/i )
+    {
+        $localmsidatabase = qx{cygpath -w "$localmsidatabase"};
+        $localmsidatabase =~ s/\\/\\\\/g;
+        $localmsidatabase =~ s/\s*$//g;
+    }
+
+    $systemcall = $msiinfo . " " . "\"" . $localmsidatabase . "\"" . " -w " . $wordcount . " -s " . "\"" . $lastprinted . "\"" . " -l $lastsavedby";
+    push(@installer::globals::logfileinfo, $systemcall);
+    $returnvalue = system($systemcall);
+
+    if ($returnvalue)
+    {
+        $infoline = "ERROR: Could not execute $systemcall !\n";
+        push(@installer::globals::logfileinfo, $infoline);
+        installer::exiter::exit_program($infoline, "write_sis_info");
+    }
+}
+
+####################################################################################
+# Simulating an administrative installation
+####################################################################################
+
+sub make_admin_install
+{
+    my ($databasepath, $targetdir) = @_;
+
+    # Create helper directory
+
+    installer::logger::print_message( "... installing $databasepath in directory $targetdir ...\n" );
+
+    my $helperdir = $targetdir . $installer::globals::separator . "installhelper";
+    installer::systemactions::create_directory($helperdir);
+
+    # Get File.idt, Component.idt and Directory.idt from database
+
+    my $tablelist = "File Directory Component Registry";
+    extract_tables_from_pcpfile($databasepath, $helperdir, $tablelist);
+
+    # Unpack all cab files into $helperdir, cab files must be located next to msi database
+    my $installdir = $databasepath;
+
+    if ( $^O =~ /cygwin/i ) { $installdir =~ s/\\/\//g; } # backslash to slash
+
+    installer::pathanalyzer::get_path_from_fullqualifiedname(\$installdir);
+
+    if ( $^O =~ /cygwin/i ) { $installdir =~ s/\//\\/g; } # slash to backslash
+
+    my $databasefilename = $databasepath;
+    installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$databasefilename);
+
+    my $cabfiles = installer::systemactions::find_file_with_file_extension("cab", $installdir);
+
+    if ( $#{$cabfiles} < 0 ) { installer::exiter::exit_program("ERROR: Did not find any cab file in directory $installdir", "make_admin_install"); }
+
+    # Set unpackdir
+    my $unpackdir = $helperdir . $installer::globals::separator . "unpack";
+    installer::systemactions::create_directory($unpackdir);
+
+    for ( my $i = 0; $i <= $#{$cabfiles}; $i++ )
+    {
+        my $cabfile = "";
+        if ( $^O =~ /cygwin/i )
+        {
+            $cabfile = $installdir . ${$cabfiles}[$i];
+        }
+        else
+        {
+            $cabfile = $installdir . $installer::globals::separator . ${$cabfiles}[$i];
+        }
+        unpack_cabinet_file($cabfile, $unpackdir);
+    }
+
+    # Reading tables
+    my $filename = $helperdir . $installer::globals::separator . "Directory.idt";
+    my $filecontent = installer::files::read_file($filename);
+    my $dirhash = analyze_directory_file($filecontent);
+
+    $filename = $helperdir . $installer::globals::separator . "Component.idt";
+    my $componentfilecontent = installer::files::read_file($filename);
+    my $componenthash = analyze_component_file($componentfilecontent);
+
+    $filename = $helperdir . $installer::globals::separator . "File.idt";
+    $filecontent = installer::files::read_file($filename);
+    my ( $filehash, $fileorder, $maxsequence ) = analyze_file_file($filecontent);
+
+    # Creating the directory structure
+    my $fullpathhash = create_directory_structure($dirhash, $targetdir);
+
+    # Copying files
+    copy_files_into_directory_structure($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash);
+
+    my $msidatabase = $targetdir . $installer::globals::separator . $databasefilename;
+    installer::systemactions::copy_one_file($databasepath, $msidatabase);
+
+    # Saving info in Summary Information Stream of msi database (required for following patches)
+    write_sis_info($msidatabase);
+
+    return $msidatabase;
+}
+
+1;