Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

81 files changed, 72206 insertions, 0 deletions

diff --git a/svx/source/svdraw/ActionDescriptionProvider.cxx b/svx/source/svdraw/ActionDescriptionProvider.cxx
new file mode 100644
index 000000000..b2e38ebd9
--- /dev/null
+++ b/svx/source/svdraw/ActionDescriptionProvider.cxx
@@ -0,0 +1,66 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/ActionDescriptionProvider.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+
+OUString ActionDescriptionProvider::createDescription( ActionType eActionType
+                        , const OUString& rObjectName )
+{
+    const char* pResID = nullptr;
+    switch( eActionType )
+    {
+    case ActionType::Insert:
+        pResID=STR_UndoInsertObj;
+        break;
+    case ActionType::Delete:
+        pResID= STR_EditDelete;
+        break;
+    case ActionType::Move:
+        pResID= STR_EditMove;
+        break;
+    case ActionType::Resize:
+        pResID= STR_EditResize;
+        break;
+    case ActionType::Rotate:
+        pResID= STR_EditRotate;
+        break;
+    case ActionType::Format:
+        pResID= STR_EditSetAttributes;
+        break;
+    case ActionType::MoveToTop:
+        pResID= STR_EditMovToTop;
+        break;
+    case ActionType::MoveToBottom:
+        pResID= STR_EditMovToBtm;
+        break;
+    case ActionType::PosSize:
+        pResID = STR_EditPosSize;
+        break;
+    }
+    if (!pResID)
+        return OUString();
+
+    OUString aStr(SvxResId(pResID));
+    return aStr.replaceAll("%1", rObjectName);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/charthelper.cxx b/svx/source/svdraw/charthelper.cxx
new file mode 100644
index 000000000..d582c57d7
--- /dev/null
+++ b/svx/source/svdraw/charthelper.cxx
@@ -0,0 +1,138 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/charthelper.hxx>
+#include <com/sun/star/embed/XEmbeddedObject.hpp>
+#include <com/sun/star/lang/XUnoTunnel.hpp>
+#include <com/sun/star/util/XUpdatable2.hpp>
+#include <com/sun/star/drawing/XDrawPageSupplier.hpp>
+#include <com/sun/star/lang/XMultiServiceFactory.hpp>
+#include <comphelper/processfactory.hxx>
+#include <com/sun/star/graphic/PrimitiveFactory2D.hpp>
+#include <drawinglayer/geometry/viewinformation2d.hxx>
+#include <com/sun/star/chart2/XChartDocument.hpp>
+#include <com/sun/star/drawing/FillStyle.hpp>
+#include <com/sun/star/drawing/LineStyle.hpp>
+
+using namespace ::com::sun::star;
+
+void ChartHelper::updateChart( const uno::Reference< ::frame::XModel >& rXModel )
+{
+    if (!rXModel.is())
+        return;
+
+    try
+    {
+        const uno::Reference< lang::XMultiServiceFactory > xChartFact(rXModel, uno::UNO_QUERY_THROW);
+        const uno::Reference< lang::XUnoTunnel > xChartView(xChartFact->createInstance("com.sun.star.chart2.ChartView"), uno::UNO_QUERY_THROW);
+        const uno::Reference<util::XUpdatable2> xUpdatable(xChartView, uno::UNO_QUERY_THROW);
+
+        xUpdatable->updateHard();
+    }
+    catch(uno::Exception&)
+    {
+        OSL_ENSURE(false, "Unexpected exception!");
+    }
+}
+
+drawinglayer::primitive2d::Primitive2DContainer ChartHelper::tryToGetChartContentAsPrimitive2DSequence(
+    const uno::Reference< ::frame::XModel >& rXModel,
+    basegfx::B2DRange& rRange)
+{
+    drawinglayer::primitive2d::Primitive2DContainer aRetval;
+
+    if (!rXModel.is())
+        return aRetval;
+
+    updateChart(rXModel);
+
+    try
+    {
+        const uno::Reference< drawing::XDrawPageSupplier > xDrawPageSupplier(rXModel, uno::UNO_QUERY_THROW);
+        const uno::Reference< container::XIndexAccess > xShapeAccess(xDrawPageSupplier->getDrawPage(), uno::UNO_QUERY_THROW);
+
+        if(xShapeAccess->getCount())
+        {
+            const sal_Int32 nShapeCount(xShapeAccess->getCount());
+            const uno::Reference< uno::XComponentContext > xContext(::comphelper::getProcessComponentContext());
+            const uno::Reference< graphic::XPrimitiveFactory2D > xPrimitiveFactory =
+                graphic::PrimitiveFactory2D::create( xContext );
+
+            const uno::Sequence< beans::PropertyValue > aParams;
+            uno::Reference< drawing::XShape > xShape;
+
+            for(sal_Int32 a(0); a < nShapeCount; a++)
+            {
+                xShapeAccess->getByIndex(a) >>= xShape;
+
+                if(xShape.is())
+                {
+                    const drawinglayer::primitive2d::Primitive2DSequence aNew(
+                            xPrimitiveFactory->createPrimitivesFromXShape(
+                                xShape,
+                                aParams));
+
+                    aRetval.append(aNew);
+                }
+            }
+        }
+    }
+    catch(uno::Exception&)
+    {
+        OSL_ENSURE(false, "Unexpected exception!");
+    }
+
+    if(!aRetval.empty())
+    {
+        const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+
+        rRange = aRetval.getB2DRange(aViewInformation2D);
+    }
+
+    return aRetval;
+}
+
+void ChartHelper::AdaptDefaultsForChart(
+    const uno::Reference < embed::XEmbeddedObject > & xEmbObj)
+{
+    if( xEmbObj.is())
+    {
+        uno::Reference< chart2::XChartDocument > xChartDoc( xEmbObj->getComponent(), uno::UNO_QUERY );
+        OSL_ENSURE( xChartDoc.is(), "Trying to set chart property to non-chart OLE" );
+        if( !xChartDoc.is())
+            return;
+
+        try
+        {
+            if (uno::Reference< beans::XPropertySet > xPageProp = xChartDoc->getPageBackground())
+            {
+                // set background to transparent (none)
+                xPageProp->setPropertyValue("FillStyle", uno::makeAny(drawing::FillStyle_NONE));
+                // set no border
+                xPageProp->setPropertyValue("LineStyle", uno::makeAny(drawing::LineStyle_NONE));
+            }
+        }
+        catch( const uno::Exception & )
+        {
+            OSL_FAIL( "Exception caught in AdaptDefaultsForChart" );
+        }
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/clonelist.cxx b/svx/source/svdraw/clonelist.cxx
new file mode 100644
index 000000000..22eabf103
--- /dev/null
+++ b/svx/source/svdraw/clonelist.cxx
@@ -0,0 +1,127 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+// #i13033#
+// New mechanism to hold a list of all original and cloned objects for later
+// re-creating the connections for contained connectors
+#include <clonelist.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/scene3d.hxx>
+
+void CloneList::AddPair(const SdrObject* pOriginal, SdrObject* pClone)
+{
+    maOriginalList.push_back(pOriginal);
+    maCloneList.push_back(pClone);
+
+    // look for subobjects, too.
+    bool bOriginalIsGroup(pOriginal->IsGroupObject());
+    bool bCloneIsGroup(pClone->IsGroupObject());
+
+    if(bOriginalIsGroup && dynamic_cast<const E3dObject* >(pOriginal) != nullptr && dynamic_cast<const E3dScene* >(pOriginal) == nullptr )
+        bOriginalIsGroup = false;
+
+    if(bCloneIsGroup && dynamic_cast<const E3dObject* >(pClone) != nullptr && dynamic_cast<const E3dScene* >(pClone) == nullptr)
+        bCloneIsGroup = false;
+
+    if(bOriginalIsGroup && bCloneIsGroup)
+    {
+        const SdrObjList* pOriginalList = pOriginal->GetSubList();
+        SdrObjList* pCloneList = pClone->GetSubList();
+
+        if(pOriginalList && pCloneList
+            && pOriginalList->GetObjCount() == pCloneList->GetObjCount())
+        {
+            for(size_t a = 0; a < pOriginalList->GetObjCount(); ++a)
+            {
+                // recursive call
+                AddPair(pOriginalList->GetObj(a), pCloneList->GetObj(a));
+            }
+        }
+    }
+}
+
+const SdrObject* CloneList::GetOriginal(sal_uInt32 nIndex) const
+{
+    return maOriginalList[nIndex];
+}
+
+SdrObject* CloneList::GetClone(sal_uInt32 nIndex) const
+{
+    return maCloneList[nIndex];
+}
+
+void CloneList::CopyConnections() const
+{
+    sal_uInt32 cloneCount = maCloneList.size();
+
+    for(size_t a = 0; a < maOriginalList.size(); a++)
+    {
+        const SdrEdgeObj* pOriginalEdge = dynamic_cast<const SdrEdgeObj*>( GetOriginal(a) );
+        SdrEdgeObj* pCloneEdge = dynamic_cast<SdrEdgeObj*>( GetClone(a) );
+
+        if(pOriginalEdge && pCloneEdge)
+        {
+            SdrObject* pOriginalNode1 = pOriginalEdge->GetConnectedNode(true);
+            SdrObject* pOriginalNode2 = pOriginalEdge->GetConnectedNode(false);
+
+            if(pOriginalNode1)
+            {
+                std::vector<const SdrObject*>::const_iterator it = std::find(maOriginalList.begin(),
+                                                                 maOriginalList.end(),
+                                                                 pOriginalNode1);
+
+                sal_uInt32 nPos = it - maOriginalList.begin();
+
+                if(it != maOriginalList.end())
+                {
+                    SdrObject *cObj = nullptr;
+
+                    if (nPos < cloneCount)
+                        cObj = GetClone(nPos);
+
+                    if(pOriginalEdge->GetConnectedNode(true) != cObj)
+                        pCloneEdge->ConnectToNode(true, cObj);
+                }
+            }
+
+            if(pOriginalNode2)
+            {
+                std::vector<const SdrObject*>::const_iterator it = std::find(maOriginalList.begin(),
+                                                                 maOriginalList.end(),
+                                                                 pOriginalNode2);
+
+                sal_uInt32 nPos = it - maOriginalList.begin();
+
+                if(it != maOriginalList.end())
+                {
+                    SdrObject *cObj = nullptr;
+
+                    if (nPos < cloneCount)
+                        cObj = GetClone(nPos);
+
+                    if(pOriginalEdge->GetConnectedNode(false) != cObj)
+                        pCloneEdge->ConnectToNode(false, cObj);
+                }
+            }
+        }
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/gradtrns.cxx b/svx/source/svdraw/gradtrns.cxx
new file mode 100644
index 000000000..ecb219836
--- /dev/null
+++ b/svx/source/svdraw/gradtrns.cxx
@@ -0,0 +1,527 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include "gradtrns.hxx"
+#include <svx/svdobj.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <tools/helpers.hxx>
+#include <vcl/canvastools.hxx>
+
+
+void GradTransformer::GradToVec(GradTransGradient const & rG, GradTransVector& rV, const SdrObject* pObj)
+{
+    // handle start color
+    rV.aCol1 = rG.aGradient.GetStartColor();
+    if(100 != rG.aGradient.GetStartIntens())
+    {
+        const double fFact(static_cast<double>(rG.aGradient.GetStartIntens()) / 100.0);
+        rV.aCol1 = Color(rV.aCol1.getBColor() * fFact);
+    }
+
+    // handle end color
+    rV.aCol2 = rG.aGradient.GetEndColor();
+    if(100 != rG.aGradient.GetEndIntens())
+    {
+        const double fFact(static_cast<double>(rG.aGradient.GetEndIntens()) / 100.0);
+        rV.aCol2 = Color(rV.aCol2.getBColor() * fFact);
+    }
+
+    // calc the basic positions
+    const tools::Rectangle aObjectSnapRectangle(pObj->GetSnapRect());
+    const basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(aObjectSnapRectangle);
+    const basegfx::B2DPoint aCenter(aRange.getCenter());
+    basegfx::B2DPoint aStartPos, aEndPos;
+
+    switch(rG.aGradient.GetGradientStyle())
+    {
+        case css::awt::GradientStyle_LINEAR :
+        {
+            aStartPos = basegfx::B2DPoint(aCenter.getX(), aRange.getMinY());
+            aEndPos = basegfx::B2DPoint(aCenter.getX(), aRange.getMaximum().getY());
+
+            if(rG.aGradient.GetBorder())
+            {
+                basegfx::B2DVector aFullVec(aStartPos - aEndPos);
+                const double fLen = (aFullVec.getLength() * (100.0 - static_cast<double>(rG.aGradient.GetBorder()))) / 100.0;
+                aFullVec.normalize();
+                aStartPos = aEndPos + (aFullVec * fLen);
+            }
+
+            if(rG.aGradient.GetAngle())
+            {
+                const double fAngle = basegfx::deg2rad(rG.aGradient.GetAngle() / 10.0);
+                const basegfx::B2DHomMatrix aTransformation(basegfx::utils::createRotateAroundPoint(aCenter, -fAngle));
+
+                aStartPos *= aTransformation;
+                aEndPos *= aTransformation;
+            }
+            break;
+        }
+        case css::awt::GradientStyle_AXIAL :
+        {
+            aStartPos = aCenter;
+            aEndPos = basegfx::B2DPoint(aCenter.getX(), aRange.getMaximum().getY());
+
+            if(rG.aGradient.GetBorder())
+            {
+                basegfx::B2DVector aFullVec(aEndPos - aStartPos);
+                const double fLen = (aFullVec.getLength() * (100.0 - static_cast<double>(rG.aGradient.GetBorder()))) / 100.0;
+                aFullVec.normalize();
+                aEndPos = aStartPos + (aFullVec * fLen);
+            }
+
+            if(rG.aGradient.GetAngle())
+            {
+                const double fAngle = basegfx::deg2rad(rG.aGradient.GetAngle() / 10.0);
+                const basegfx::B2DHomMatrix aTransformation(basegfx::utils::createRotateAroundPoint(aCenter, -fAngle));
+
+                aStartPos *= aTransformation;
+                aEndPos *= aTransformation;
+            }
+            break;
+        }
+        case css::awt::GradientStyle_RADIAL :
+        case css::awt::GradientStyle_SQUARE :
+        {
+            aStartPos = basegfx::B2DPoint(aRange.getMinX(), aRange.getMaximum().getY());
+            aEndPos = basegfx::B2DPoint(aRange.getMinX(), aRange.getMinY());
+
+            if(rG.aGradient.GetBorder())
+            {
+                basegfx::B2DVector aFullVec(aStartPos - aEndPos);
+                const double fLen = (aFullVec.getLength() * (100.0 - static_cast<double>(rG.aGradient.GetBorder()))) / 100.0;
+                aFullVec.normalize();
+                aStartPos = aEndPos + (aFullVec * fLen);
+            }
+
+            if(rG.aGradient.GetAngle())
+            {
+                const double fAngle = basegfx::deg2rad(rG.aGradient.GetAngle() / 10.0);
+                const basegfx::B2DHomMatrix aTransformation(basegfx::utils::createRotateAroundPoint(aEndPos, -fAngle));
+
+                aStartPos *= aTransformation;
+                aEndPos *= aTransformation;
+            }
+
+            if(rG.aGradient.GetXOffset() || rG.aGradient.GetYOffset())
+            {
+                basegfx::B2DPoint aOffset(
+                    (aRange.getWidth() * rG.aGradient.GetXOffset()) / 100.0,
+                    (aRange.getHeight() * rG.aGradient.GetYOffset()) / 100.0);
+
+                aStartPos += aOffset;
+                aEndPos += aOffset;
+            }
+
+            break;
+        }
+        case css::awt::GradientStyle_ELLIPTICAL :
+        case css::awt::GradientStyle_RECT :
+        {
+            aStartPos = basegfx::B2DPoint(aRange.getMinX(), aCenter.getY());
+            aEndPos = basegfx::B2DPoint(aRange.getMinX(), aRange.getMinY());
+
+            if(rG.aGradient.GetBorder())
+            {
+                basegfx::B2DVector aFullVec(aStartPos - aEndPos);
+                const double fLen = (aFullVec.getLength() * (100.0 - static_cast<double>(rG.aGradient.GetBorder()))) / 100.0;
+                aFullVec.normalize();
+                aStartPos = aEndPos + (aFullVec * fLen);
+            }
+
+            if(rG.aGradient.GetAngle())
+            {
+                const double fAngle = basegfx::deg2rad(rG.aGradient.GetAngle() / 10.0);
+                const basegfx::B2DHomMatrix aTransformation(basegfx::utils::createRotateAroundPoint(aEndPos, -fAngle));
+
+                aStartPos *= aTransformation;
+                aEndPos *= aTransformation;
+            }
+
+            if(rG.aGradient.GetXOffset() || rG.aGradient.GetYOffset())
+            {
+                basegfx::B2DPoint aOffset(
+                    (aRange.getWidth() * rG.aGradient.GetXOffset()) / 100.0,
+                    (aRange.getHeight() * rG.aGradient.GetYOffset()) / 100.0);
+
+                aStartPos += aOffset;
+                aEndPos += aOffset;
+            }
+
+            break;
+        }
+        default:
+            break;
+    }
+
+    // set values for vector positions now
+    rV.maPositionA = aStartPos;
+    rV.maPositionB = aEndPos;
+}
+
+
+void GradTransformer::VecToGrad(GradTransVector const & rV, GradTransGradient& rG, GradTransGradient const & rGOld, const SdrObject* pObj,
+    bool bMoveSingle, bool bMoveFirst)
+{
+    // fill old gradient to new gradient to have a base
+    rG = rGOld;
+
+    // handle color changes
+    if(rV.aCol1 != rGOld.aGradient.GetStartColor())
+    {
+        rG.aGradient.SetStartColor(rV.aCol1);
+        rG.aGradient.SetStartIntens(100);
+    }
+    if(rV.aCol2 != rGOld.aGradient.GetEndColor())
+    {
+        rG.aGradient.SetEndColor(rV.aCol2);
+        rG.aGradient.SetEndIntens(100);
+    }
+
+    // calc the basic positions
+    const tools::Rectangle aObjectSnapRectangle(pObj->GetSnapRect());
+    const basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(aObjectSnapRectangle);
+    const basegfx::B2DPoint aCenter(aRange.getCenter());
+    basegfx::B2DPoint aStartPos(rV.maPositionA);
+    basegfx::B2DPoint aEndPos(rV.maPositionB);
+
+    switch(rG.aGradient.GetGradientStyle())
+    {
+        case css::awt::GradientStyle_LINEAR :
+        {
+            if(!bMoveSingle || !bMoveFirst)
+            {
+                basegfx::B2DVector aFullVec(aEndPos - aStartPos);
+
+                if(bMoveSingle)
+                {
+                    aFullVec = aEndPos - aCenter;
+                }
+
+                aFullVec.normalize();
+
+                double fNewFullAngle(basegfx::rad2deg(atan2(aFullVec.getY(), aFullVec.getX())));
+                fNewFullAngle *= -10.0;
+                fNewFullAngle += 900.0;
+
+                // clip
+                while(fNewFullAngle < 0.0)
+                {
+                    fNewFullAngle += 3600.0;
+                }
+
+                while(fNewFullAngle >= 3600.0)
+                {
+                    fNewFullAngle -= 3600.0;
+                }
+
+                // to int and set
+                sal_Int32 nNewAngle = FRound(fNewFullAngle);
+
+                if(nNewAngle != rGOld.aGradient.GetAngle())
+                {
+                    rG.aGradient.SetAngle(nNewAngle);
+                }
+            }
+
+            if(!bMoveSingle || bMoveFirst)
+            {
+                const basegfx::B2DVector aFullVec(aEndPos - aStartPos);
+                const basegfx::B2DPoint aBottomLeft(aRange.getMinX(), aRange.getMaximum().getY());
+                const basegfx::B2DPoint aTopLeft(aRange.getMinX(), aRange.getMinY());
+                const basegfx::B2DVector aOldVec(aBottomLeft - aTopLeft);
+                const double fFullLen(aFullVec.getLength());
+                const double fOldLen(aOldVec.getLength());
+                const double fNewBorder((fFullLen * 100.0) / fOldLen);
+                sal_Int32 nNewBorder(100 - FRound(fNewBorder));
+
+                // clip
+                if(nNewBorder < 0)
+                {
+                    nNewBorder = 0;
+                }
+
+                if(nNewBorder > 100)
+                {
+                    nNewBorder = 100;
+                }
+
+                // set
+                if(nNewBorder != rG.aGradient.GetBorder())
+                {
+                    rG.aGradient.SetBorder(static_cast<sal_uInt16>(nNewBorder));
+                }
+            }
+
+            break;
+        }
+        case css::awt::GradientStyle_AXIAL :
+        {
+            if(!bMoveSingle || !bMoveFirst)
+            {
+                basegfx::B2DVector aFullVec(aEndPos - aCenter);
+                const basegfx::B2DVector aOldVec(basegfx::B2DPoint(aCenter.getX(), aRange.getMaximum().getY()) - aCenter);
+                const double fFullLen(aFullVec.getLength());
+                const double fOldLen(aOldVec.getLength());
+                const double fNewBorder((fFullLen * 100.0) / fOldLen);
+                sal_Int32 nNewBorder = 100 - FRound(fNewBorder);
+
+                // clip
+                if(nNewBorder < 0)
+                {
+                    nNewBorder = 0;
+                }
+
+                if(nNewBorder > 100)
+                {
+                    nNewBorder = 100;
+                }
+
+                // set
+                if(nNewBorder != rG.aGradient.GetBorder())
+                {
+                    rG.aGradient.SetBorder(static_cast<sal_uInt16>(nNewBorder));
+                }
+
+                aFullVec.normalize();
+                double fNewFullAngle(basegfx::rad2deg(atan2(aFullVec.getY(), aFullVec.getX())));
+                fNewFullAngle *= -10.0;
+                fNewFullAngle += 900.0;
+
+                // clip
+                while(fNewFullAngle < 0.0)
+                {
+                    fNewFullAngle += 3600.0;
+                }
+
+                while(fNewFullAngle >= 3600.0)
+                {
+                    fNewFullAngle -= 3600.0;
+                }
+
+                // to int and set
+                const sal_Int32 nNewAngle(FRound(fNewFullAngle));
+
+                if(nNewAngle != rGOld.aGradient.GetAngle())
+                {
+                    rG.aGradient.SetAngle(nNewAngle);
+                }
+            }
+
+            break;
+        }
+        case css::awt::GradientStyle_RADIAL :
+        case css::awt::GradientStyle_SQUARE :
+        {
+            if(!bMoveSingle || !bMoveFirst)
+            {
+                const basegfx::B2DPoint aTopLeft(aRange.getMinX(), aRange.getMinY());
+                const basegfx::B2DPoint aOffset(aEndPos - aTopLeft);
+                sal_Int32 nNewXOffset(FRound((aOffset.getX() * 100.0) / aRange.getWidth()));
+                sal_Int32 nNewYOffset(FRound((aOffset.getY() * 100.0) / aRange.getHeight()));
+
+                // clip
+                if(nNewXOffset < 0)
+                {
+                    nNewXOffset = 0;
+                }
+
+                if(nNewXOffset > 100)
+                {
+                    nNewXOffset = 100;
+                }
+
+                if(nNewYOffset < 0)
+                {
+                    nNewYOffset = 0;
+                }
+
+                if(nNewYOffset > 100)
+                {
+                    nNewYOffset = 100;
+                }
+
+                rG.aGradient.SetXOffset(static_cast<sal_uInt16>(nNewXOffset));
+                rG.aGradient.SetYOffset(static_cast<sal_uInt16>(nNewYOffset));
+
+                aStartPos -= aOffset;
+                aEndPos -= aOffset;
+            }
+
+            if(!bMoveSingle || bMoveFirst)
+            {
+                basegfx::B2DVector aFullVec(aStartPos - aEndPos);
+                const basegfx::B2DPoint aBottomLeft(aRange.getMinX(), aRange.getMaximum().getY());
+                const basegfx::B2DPoint aTopLeft(aRange.getMinX(), aRange.getMinY());
+                const basegfx::B2DVector aOldVec(aBottomLeft - aTopLeft);
+                const double fFullLen(aFullVec.getLength());
+                const double fOldLen(aOldVec.getLength());
+                const double fNewBorder((fFullLen * 100.0) / fOldLen);
+                sal_Int32 nNewBorder(100 - FRound(fNewBorder));
+
+                // clip
+                if(nNewBorder < 0)
+                {
+                    nNewBorder = 0;
+                }
+
+                if(nNewBorder > 100)
+                {
+                    nNewBorder = 100;
+                }
+
+                // set
+                if(nNewBorder != rG.aGradient.GetBorder())
+                {
+                    rG.aGradient.SetBorder(static_cast<sal_uInt16>(nNewBorder));
+                }
+
+                // angle is not definitely necessary for these modes, but it makes
+                // controlling more fun for the user
+                aFullVec.normalize();
+                double fNewFullAngle(basegfx::rad2deg(atan2(aFullVec.getY(), aFullVec.getX())));
+                fNewFullAngle *= -10.0;
+                fNewFullAngle += 900.0;
+
+                // clip
+                while(fNewFullAngle < 0.0)
+                {
+                    fNewFullAngle += 3600.0;
+                }
+
+                while(fNewFullAngle >= 3600.0)
+                {
+                    fNewFullAngle -= 3600.0;
+                }
+
+                // to int and set
+                const sal_Int32 nNewAngle(FRound(fNewFullAngle));
+
+                if(nNewAngle != rGOld.aGradient.GetAngle())
+                {
+                    rG.aGradient.SetAngle(nNewAngle);
+                }
+            }
+
+            break;
+        }
+        case css::awt::GradientStyle_ELLIPTICAL :
+        case css::awt::GradientStyle_RECT :
+        {
+            if(!bMoveSingle || !bMoveFirst)
+            {
+                const basegfx::B2DPoint aTopLeft(aRange.getMinX(), aRange.getMinY());
+                const basegfx::B2DPoint aOffset(aEndPos - aTopLeft);
+                sal_Int32 nNewXOffset(FRound((aOffset.getX() * 100.0) / aRange.getWidth()));
+                sal_Int32 nNewYOffset(FRound((aOffset.getY() * 100.0) / aRange.getHeight()));
+
+                // clip
+                if(nNewXOffset < 0)
+                {
+                    nNewXOffset = 0;
+                }
+
+                if(nNewXOffset > 100)
+                {
+                    nNewXOffset = 100;
+                }
+
+                if(nNewYOffset < 0)
+                {
+                    nNewYOffset = 0;
+                }
+
+                if(nNewYOffset > 100)
+                {
+                    nNewYOffset = 100;
+                }
+
+                rG.aGradient.SetXOffset(static_cast<sal_uInt16>(nNewXOffset));
+                rG.aGradient.SetYOffset(static_cast<sal_uInt16>(nNewYOffset));
+
+                aStartPos -= aOffset;
+                aEndPos -= aOffset;
+            }
+
+            if(!bMoveSingle || bMoveFirst)
+            {
+                basegfx::B2DVector aFullVec(aStartPos - aEndPos);
+                const basegfx::B2DPoint aTopLeft(aRange.getMinX(), aRange.getMinY());
+                const basegfx::B2DPoint aCenterLeft(aRange.getMinX(), aCenter.getY());
+                const basegfx::B2DVector aOldVec(aCenterLeft - aTopLeft);
+                const double fFullLen(aFullVec.getLength());
+                const double fOldLen(aOldVec.getLength());
+                const double fNewBorder((fFullLen * 100.0) / fOldLen);
+                sal_Int32 nNewBorder(100 - FRound(fNewBorder));
+
+                // clip
+                if(nNewBorder < 0)
+                {
+                    nNewBorder = 0;
+                }
+
+                if(nNewBorder > 100)
+                {
+                    nNewBorder = 100;
+                }
+
+                // set
+                if(nNewBorder != rG.aGradient.GetBorder())
+                {
+                    rG.aGradient.SetBorder(static_cast<sal_uInt16>(nNewBorder));
+                }
+
+                // angle is not definitely necessary for these modes, but it makes
+                // controlling more fun for the user
+                aFullVec.normalize();
+                double fNewFullAngle(basegfx::rad2deg(atan2(aFullVec.getY(), aFullVec.getX())));
+                fNewFullAngle *= -10.0;
+                fNewFullAngle += 900.0;
+
+                // clip
+                while(fNewFullAngle < 0.0)
+                {
+                    fNewFullAngle += 3600.0;
+                }
+
+                while(fNewFullAngle >= 3600.0)
+                {
+                    fNewFullAngle -= 3600.0;
+                }
+
+                // to int and set
+                const sal_Int32 nNewAngle(FRound(fNewFullAngle));
+
+                if(nNewAngle != rGOld.aGradient.GetAngle())
+                {
+                    rG.aGradient.SetAngle(nNewAngle);
+                }
+            }
+
+            break;
+        }
+        default:
+            break;
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/gradtrns.hxx b/svx/source/svdraw/gradtrns.hxx
new file mode 100644
index 000000000..eee35582a
--- /dev/null
+++ b/svx/source/svdraw/gradtrns.hxx
@@ -0,0 +1,55 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_SVX_SOURCE_SVDRAW_GRADTRNS_HXX
+#define INCLUDED_SVX_SOURCE_SVDRAW_GRADTRNS_HXX
+
+#include <svx/xgrad.hxx>
+#include <basegfx/point/b2dpoint.hxx>
+
+class SdrObject;
+
+class GradTransVector
+{
+public:
+    basegfx::B2DPoint           maPositionA;
+    basegfx::B2DPoint           maPositionB;
+    Color                       aCol1;
+    Color                       aCol2;
+};
+
+class GradTransGradient
+{
+public:
+    XGradient                   aGradient;
+};
+
+struct GradTransformer
+{
+    GradTransformer() = delete;
+
+    static void GradToVec(GradTransGradient const & rG, GradTransVector& rV,
+        const SdrObject* pObj);
+    static void VecToGrad(GradTransVector const & rV, GradTransGradient& rG,
+        GradTransGradient const & rGOld, const SdrObject* pObj, bool bMoveSingle, bool bMoveFirst);
+};
+
+#endif // INCLUDED_SVX_SOURCE_SVDRAW_GRADTRNS_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/polypolygoneditor.cxx b/svx/source/svdraw/polypolygoneditor.cxx
new file mode 100644
index 000000000..1f82f0436
--- /dev/null
+++ b/svx/source/svdraw/polypolygoneditor.cxx
@@ -0,0 +1,182 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+
+#include <svx/polypolygoneditor.hxx>
+
+namespace sdr {
+
+PolyPolygonEditor::PolyPolygonEditor( const basegfx::B2DPolyPolygon& rPolyPolygon)
+: maPolyPolygon( rPolyPolygon )
+{
+}
+
+bool PolyPolygonEditor::DeletePoints( const std::set< sal_uInt16 >& rAbsPoints )
+{
+    bool bPolyPolyChanged = false;
+
+    std::set< sal_uInt16 >::const_reverse_iterator aIter( rAbsPoints.rbegin() );
+    for( ; aIter != rAbsPoints.rend(); ++aIter )
+    {
+        sal_uInt32 nPoly, nPnt;
+        if( GetRelativePolyPoint(maPolyPolygon,(*aIter), nPoly, nPnt) )
+        {
+            // remove point
+            basegfx::B2DPolygon aCandidate(maPolyPolygon.getB2DPolygon(nPoly));
+
+            aCandidate.remove(nPnt);
+
+
+            if( aCandidate.count() < 2 )
+            {
+                maPolyPolygon.remove(nPoly);
+            }
+            else
+            {
+                maPolyPolygon.setB2DPolygon(nPoly, aCandidate);
+            }
+
+            bPolyPolyChanged = true;
+        }
+    }
+
+    return bPolyPolyChanged;
+}
+
+bool PolyPolygonEditor::SetSegmentsKind(SdrPathSegmentKind eKind, const std::set< sal_uInt16 >& rAbsPoints )
+{
+    bool bPolyPolyChanged = false;
+
+    std::set< sal_uInt16 >::const_reverse_iterator aIter( rAbsPoints.rbegin() );
+    for( ; aIter != rAbsPoints.rend(); ++aIter )
+    {
+        sal_uInt32 nPolyNum, nPntNum;
+
+        if(PolyPolygonEditor::GetRelativePolyPoint(maPolyPolygon, (*aIter), nPolyNum, nPntNum))
+        {
+            // do change at aNewPolyPolygon. Take a look at edge.
+            basegfx::B2DPolygon aCandidate(maPolyPolygon.getB2DPolygon(nPolyNum));
+            const sal_uInt32 nCount(aCandidate.count());
+
+            if(nCount && (nPntNum + 1 < nCount || aCandidate.isClosed()))
+            {
+                bool bCandidateChanged(false);
+
+                // it's a valid edge, check control point usage
+                const sal_uInt32 nNextIndex((nPntNum + 1) % nCount);
+                const bool bContolUsed(aCandidate.areControlPointsUsed()
+                    && (aCandidate.isNextControlPointUsed(nPntNum) || aCandidate.isPrevControlPointUsed(nNextIndex)));
+
+                if(bContolUsed)
+                {
+                    if(SdrPathSegmentKind::Toggle == eKind || SdrPathSegmentKind::Line == eKind)
+                    {
+                        // remove control
+                        aCandidate.resetNextControlPoint(nPntNum);
+                        aCandidate.resetPrevControlPoint(nNextIndex);
+                        bCandidateChanged = true;
+                    }
+                }
+                else
+                {
+                    if(SdrPathSegmentKind::Toggle == eKind || SdrPathSegmentKind::Curve == eKind)
+                    {
+                        // add control
+                        const basegfx::B2DPoint aStart(aCandidate.getB2DPoint(nPntNum));
+                        const basegfx::B2DPoint aEnd(aCandidate.getB2DPoint(nNextIndex));
+
+                        aCandidate.setNextControlPoint(nPntNum, interpolate(aStart, aEnd, (1.0 / 3.0)));
+                        aCandidate.setPrevControlPoint(nNextIndex, interpolate(aStart, aEnd, (2.0 / 3.0)));
+                        bCandidateChanged = true;
+                    }
+                }
+
+                if(bCandidateChanged)
+                {
+                    maPolyPolygon.setB2DPolygon(nPolyNum, aCandidate);
+                    bPolyPolyChanged = true;
+                }
+            }
+        }
+    }
+
+    return bPolyPolyChanged;
+}
+
+bool PolyPolygonEditor::SetPointsSmooth( basegfx::B2VectorContinuity eFlags, const std::set< sal_uInt16 >& rAbsPoints)
+{
+    bool bPolyPolygonChanged(false);
+
+    std::set< sal_uInt16 >::const_reverse_iterator aIter( rAbsPoints.rbegin() );
+    for( ; aIter != rAbsPoints.rend(); ++aIter )
+    {
+        sal_uInt32 nPolyNum, nPntNum;
+
+        if(PolyPolygonEditor::GetRelativePolyPoint(maPolyPolygon, (*aIter), nPolyNum, nPntNum))
+        {
+            // do change at aNewPolyPolygon...
+            basegfx::B2DPolygon aCandidate(maPolyPolygon.getB2DPolygon(nPolyNum));
+
+            // set continuity in point, make sure there is a curve
+            bool bPolygonChanged = basegfx::utils::expandToCurveInPoint(aCandidate, nPntNum);
+            bPolygonChanged |= basegfx::utils::setContinuityInPoint(aCandidate, nPntNum, eFlags);
+
+            if(bPolygonChanged)
+            {
+                maPolyPolygon.setB2DPolygon(nPolyNum, aCandidate);
+                bPolyPolygonChanged = true;
+            }
+        }
+    }
+
+    return bPolyPolygonChanged;
+}
+
+bool PolyPolygonEditor::GetRelativePolyPoint( const basegfx::B2DPolyPolygon& rPoly, sal_uInt32 nAbsPnt, sal_uInt32& rPolyNum, sal_uInt32& rPointNum )
+{
+    const sal_uInt32 nPolyCount(rPoly.count());
+    sal_uInt32 nPolyNum(0);
+
+    while(nPolyNum < nPolyCount)
+    {
+        const sal_uInt32 nPointCount(rPoly.getB2DPolygon(nPolyNum).count());
+
+        if(nAbsPnt < nPointCount)
+        {
+            rPolyNum = nPolyNum;
+            rPointNum = nAbsPnt;
+
+            return true;
+        }
+        else
+        {
+            nPolyNum++;
+            nAbsPnt -= nPointCount;
+        }
+    }
+
+    return false;
+}
+
+} // end of namespace sdr
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/presetooxhandleadjustmentrelations.cxx b/svx/source/svdraw/presetooxhandleadjustmentrelations.cxx
new file mode 100644
index 000000000..0bf47ad64
--- /dev/null
+++ b/svx/source/svdraw/presetooxhandleadjustmentrelations.cxx
@@ -0,0 +1,336 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4; fill-column: 100 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#include <rtl/ustring.hxx>
+#include <unordered_map>
+#include "presetooxhandleadjustmentrelations.hxx"
+
+namespace
+{
+typedef std::unordered_map<OUString, OUString> HandleAdjRelHashMap;
+
+struct HandleAdjRel
+{
+    // Shape name without leading "ooxml-", underscore, zero based handle index
+    // e.g. The third handle in shape of type "ooxml-circularArrow" will be
+    // identified by key "circularArrow_2"
+    const OUString sShape_Handle;
+
+    // 4 tokens with separator "|"
+    // first: RefX or RefR, na if not exists
+    // second: adj, or adj1 or adj2, etc. as in preset, na if not exists
+    // third: RefY or RefAngle, na if not exists
+    // forth: adj, or adj1 or adj2, etc. as in preset, na if not exists
+    // e.g. The third handle in shape <circularArrow> has in the preset
+    // the tag <ahPolar gdRefR="adj5" minR="0" maxR="25000"> .
+    // The resulting value in the map here is "RefR|adj5|na|na"
+    const OUString sAdjReferences;
+};
+
+// The array initializer has been extracted from
+// oox/source/drawingml/customshapes/presetShapeDefinitions.xml
+// by using an XSLT file. That file is attached to tdf#126512.
+static const HandleAdjRel aHandleAdjRelArray[]
+    = { { "accentBorderCallout1_0", "RefX|adj2|RefY|adj1" },
+        { "accentBorderCallout1_1", "RefX|adj4|RefY|adj3" },
+        { "accentBorderCallout2_0", "RefX|adj2|RefY|adj1" },
+        { "accentBorderCallout2_1", "RefX|adj4|RefY|adj3" },
+        { "accentBorderCallout2_2", "RefX|adj6|RefY|adj5" },
+        { "accentBorderCallout3_0", "RefX|adj2|RefY|adj1" },
+        { "accentBorderCallout3_1", "RefX|adj4|RefY|adj3" },
+        { "accentBorderCallout3_2", "RefX|adj6|RefY|adj5" },
+        { "accentBorderCallout3_3", "RefX|adj8|RefY|adj7" },
+        { "accentCallout1_0", "RefX|adj2|RefY|adj1" },
+        { "accentCallout1_1", "RefX|adj4|RefY|adj3" },
+        { "accentCallout2_0", "RefX|adj2|RefY|adj1" },
+        { "accentCallout2_1", "RefX|adj4|RefY|adj3" },
+        { "accentCallout2_2", "RefX|adj6|RefY|adj5" },
+        { "accentCallout3_0", "RefX|adj2|RefY|adj1" },
+        { "accentCallout3_1", "RefX|adj4|RefY|adj3" },
+        { "accentCallout3_2", "RefX|adj6|RefY|adj5" },
+        { "accentCallout3_3", "RefX|adj8|RefY|adj7" },
+        { "arc_0", "na|na|RefAngle|adj1" },
+        { "arc_1", "na|na|RefAngle|adj2" },
+        { "bentArrow_0", "RefX|adj1|na|na" },
+        { "bentArrow_1", "na|na|RefY|adj2" },
+        { "bentArrow_2", "RefX|adj3|na|na" },
+        { "bentArrow_3", "RefX|adj4|na|na" },
+        { "bentConnector3_0", "RefX|adj1|na|na" },
+        { "bentConnector4_0", "RefX|adj1|na|na" },
+        { "bentConnector4_1", "na|na|RefY|adj2" },
+        { "bentConnector5_0", "RefX|adj1|na|na" },
+        { "bentConnector5_1", "na|na|RefY|adj2" },
+        { "bentConnector5_2", "RefX|adj3|na|na" },
+        { "bentUpArrow_0", "na|na|RefY|adj1" },
+        { "bentUpArrow_1", "RefX|adj2|na|na" },
+        { "bentUpArrow_2", "na|na|RefY|adj3" },
+        { "bevel_0", "RefX|adj|na|na" },
+        { "blockArc_0", "na|na|RefAngle|adj1" },
+        { "blockArc_1", "RefR|adj3|RefAngle|adj2" },
+        { "borderCallout1_0", "RefX|adj2|RefY|adj1" },
+        { "borderCallout1_1", "RefX|adj4|RefY|adj3" },
+        { "borderCallout2_0", "RefX|adj2|RefY|adj1" },
+        { "borderCallout2_1", "RefX|adj4|RefY|adj3" },
+        { "borderCallout2_2", "RefX|adj6|RefY|adj5" },
+        { "borderCallout3_0", "RefX|adj2|RefY|adj1" },
+        { "borderCallout3_1", "RefX|adj4|RefY|adj3" },
+        { "borderCallout3_2", "RefX|adj6|RefY|adj5" },
+        { "borderCallout3_3", "RefX|adj8|RefY|adj7" },
+        { "bracePair_0", "na|na|RefY|adj" },
+        { "bracketPair_0", "na|na|RefY|adj" },
+        { "callout1_0", "RefX|adj2|RefY|adj1" },
+        { "callout1_1", "RefX|adj4|RefY|adj3" },
+        { "callout2_0", "RefX|adj2|RefY|adj1" },
+        { "callout2_1", "RefX|adj4|RefY|adj3" },
+        { "callout2_2", "RefX|adj6|RefY|adj5" },
+        { "callout3_0", "RefX|adj2|RefY|adj1" },
+        { "callout3_1", "RefX|adj4|RefY|adj3" },
+        { "callout3_2", "RefX|adj6|RefY|adj5" },
+        { "callout3_3", "RefX|adj8|RefY|adj7" },
+        { "can_0", "na|na|RefY|adj" },
+        { "chevron_0", "RefX|adj|na|na" },
+        { "chord_0", "na|na|RefAngle|adj1" },
+        { "chord_1", "na|na|RefAngle|adj2" },
+        { "circularArrow_0", "na|na|RefAngle|adj2" },
+        { "circularArrow_1", "na|na|RefAngle|adj4" },
+        { "circularArrow_2", "RefR|adj1|RefAngle|adj3" },
+        { "circularArrow_3", "RefR|adj5|na|na" },
+        { "cloudCallout_0", "RefX|adj1|RefY|adj2" },
+        { "corner_0", "na|na|RefY|adj1" },
+        { "corner_1", "RefX|adj2|na|na" },
+        { "cube_0", "na|na|RefY|adj" },
+        { "curvedConnector3_0", "RefX|adj1|na|na" },
+        { "curvedConnector4_0", "RefX|adj1|na|na" },
+        { "curvedConnector4_1", "na|na|RefY|adj2" },
+        { "curvedConnector5_0", "RefX|adj1|na|na" },
+        { "curvedConnector5_1", "na|na|RefY|adj2" },
+        { "curvedConnector5_2", "RefX|adj3|na|na" },
+        { "curvedDownArrow_0", "RefX|adj1|na|na" },
+        { "curvedDownArrow_1", "RefX|adj2|na|na" },
+        { "curvedDownArrow_2", "na|na|RefY|adj3" },
+        { "curvedLeftArrow_0", "na|na|RefY|adj1" },
+        { "curvedLeftArrow_1", "na|na|RefY|adj2" },
+        { "curvedLeftArrow_2", "RefX|adj3|na|na" },
+        { "curvedRightArrow_0", "na|na|RefY|adj1" },
+        { "curvedRightArrow_1", "na|na|RefY|adj2" },
+        { "curvedRightArrow_2", "RefX|adj3|na|na" },
+        { "curvedUpArrow_0", "RefX|adj1|na|na" },
+        { "curvedUpArrow_1", "RefX|adj2|na|na" },
+        { "curvedUpArrow_2", "na|na|RefY|adj3" },
+        { "diagStripe_0", "na|na|RefY|adj" },
+        { "donut_0", "RefR|adj|na|na" },
+        { "doubleWave_0", "na|na|RefY|adj1" },
+        { "doubleWave_1", "RefX|adj2|na|na" },
+        { "downArrow_0", "RefX|adj1|na|na" },
+        { "downArrow_1", "na|na|RefY|adj2" },
+        { "downArrowCallout_0", "RefX|adj1|na|na" },
+        { "downArrowCallout_1", "RefX|adj2|na|na" },
+        { "downArrowCallout_2", "na|na|RefY|adj3" },
+        { "downArrowCallout_3", "na|na|RefY|adj4" },
+        { "ellipseRibbon_0", "na|na|RefY|adj1" },
+        { "ellipseRibbon_1", "RefX|adj2|na|na" },
+        { "ellipseRibbon_2", "na|na|RefY|adj3" },
+        { "ellipseRibbon2_0", "na|na|RefY|adj1" },
+        { "ellipseRibbon2_1", "RefX|adj2|na|na" },
+        { "ellipseRibbon2_2", "na|na|RefY|adj3" },
+        { "foldedCorner_0", "RefX|adj|na|na" },
+        { "frame_0", "RefX|adj1|na|na" },
+        { "gear6_0", "na|na|RefY|adj1" },
+        { "gear6_1", "RefX|adj2|na|na" },
+        { "gear9_0", "na|na|RefY|adj1" },
+        { "gear9_1", "RefX|adj2|na|na" },
+        { "halfFrame_0", "na|na|RefY|adj1" },
+        { "halfFrame_1", "RefX|adj2|na|na" },
+        { "hexagon_0", "RefX|adj|na|na" },
+        { "homePlate_0", "RefX|adj|na|na" },
+        { "horizontalScroll_0", "RefX|adj|na|na" },
+        { "leftArrow_0", "na|na|RefY|adj1" },
+        { "leftArrow_1", "RefX|adj2|na|na" },
+        { "leftArrowCallout_0", "na|na|RefY|adj1" },
+        { "leftArrowCallout_1", "na|na|RefY|adj2" },
+        { "leftArrowCallout_2", "RefX|adj3|na|na" },
+        { "leftArrowCallout_3", "RefX|adj4|na|na" },
+        { "leftBrace_0", "na|na|RefY|adj1" },
+        { "leftBrace_1", "na|na|RefY|adj2" },
+        { "leftBracket_0", "na|na|RefY|adj" },
+        { "leftCircularArrow_0", "na|na|RefAngle|adj2" },
+        { "leftCircularArrow_1", "na|na|RefAngle|adj4" },
+        { "leftCircularArrow_2", "RefR|adj1|RefAngle|adj3" },
+        { "leftCircularArrow_3", "RefR|adj5|na|na" },
+        { "leftRightArrow_0", "na|na|RefY|adj1" },
+        { "leftRightArrow_1", "RefX|adj2|na|na" },
+        { "leftRightArrowCallout_0", "na|na|RefY|adj1" },
+        { "leftRightArrowCallout_1", "na|na|RefY|adj2" },
+        { "leftRightArrowCallout_2", "RefX|adj3|na|na" },
+        { "leftRightArrowCallout_3", "RefX|adj4|na|na" },
+        { "leftRightCircularArrow_0", "na|na|RefAngle|adj2" },
+        { "leftRightCircularArrow_1", "na|na|RefAngle|adj4" },
+        { "leftRightCircularArrow_2", "RefR|adj1|RefAngle|adj3" },
+        { "leftRightCircularArrow_3", "RefR|adj5|na|na" },
+        { "leftRightRibbon_0", "na|na|RefY|adj1" },
+        { "leftRightRibbon_1", "RefX|adj2|na|na" },
+        { "leftRightRibbon_2", "na|na|RefY|adj3" },
+        { "leftRightUpArrow_0", "RefX|adj1|na|na" },
+        { "leftRightUpArrow_1", "RefX|adj2|na|na" },
+        { "leftRightUpArrow_2", "na|na|RefY|adj3" },
+        { "leftUpArrow_0", "na|na|RefY|adj1" },
+        { "leftUpArrow_1", "RefX|adj2|na|na" },
+        { "leftUpArrow_2", "na|na|RefY|adj3" },
+        { "mathDivide_0", "na|na|RefY|adj1" },
+        { "mathDivide_1", "na|na|RefY|adj2" },
+        { "mathDivide_2", "RefX|adj3|na|na" },
+        { "mathEqual_0", "na|na|RefY|adj1" },
+        { "mathEqual_1", "na|na|RefY|adj2" },
+        { "mathMinus_0", "na|na|RefY|adj1" },
+        { "mathMultiply_0", "na|na|RefY|adj1" },
+        { "mathNotEqual_0", "na|na|RefY|adj1" },
+        { "mathNotEqual_1", "na|na|RefAngle|adj2" },
+        { "mathNotEqual_2", "na|na|RefY|adj3" },
+        { "mathPlus_0", "na|na|RefY|adj1" },
+        { "moon_0", "RefX|adj|na|na" },
+        { "nonIsoscelesTrapezoid_0", "RefX|adj1|na|na" },
+        { "nonIsoscelesTrapezoid_1", "RefX|adj2|na|na" },
+        { "noSmoking_0", "RefR|adj|na|na" },
+        { "notchedRightArrow_0", "na|na|RefY|adj1" },
+        { "notchedRightArrow_1", "RefX|adj2|na|na" },
+        { "octagon_0", "RefX|adj|na|na" },
+        { "parallelogram_0", "RefX|adj|na|na" },
+        { "pie_0", "na|na|RefAngle|adj1" },
+        { "pie_1", "na|na|RefAngle|adj2" },
+        { "plaque_0", "RefX|adj|na|na" },
+        { "plus_0", "RefX|adj|na|na" },
+        { "quadArrow_0", "RefX|adj1|na|na" },
+        { "quadArrow_1", "RefX|adj2|na|na" },
+        { "quadArrow_2", "na|na|RefY|adj3" },
+        { "quadArrowCallout_0", "RefX|adj1|na|na" },
+        { "quadArrowCallout_1", "RefX|adj2|na|na" },
+        { "quadArrowCallout_2", "na|na|RefY|adj3" },
+        { "quadArrowCallout_3", "na|na|RefY|adj4" },
+        { "ribbon_0", "na|na|RefY|adj1" },
+        { "ribbon_1", "RefX|adj2|na|na" },
+        { "ribbon2_0", "na|na|RefY|adj1" },
+        { "ribbon2_1", "RefX|adj2|na|na" },
+        { "rightArrow_0", "na|na|RefY|adj1" },
+        { "rightArrow_1", "RefX|adj2|na|na" },
+        { "rightArrowCallout_0", "na|na|RefY|adj1" },
+        { "rightArrowCallout_1", "na|na|RefY|adj2" },
+        { "rightArrowCallout_2", "RefX|adj3|na|na" },
+        { "rightArrowCallout_3", "RefX|adj4|na|na" },
+        { "rightBrace_0", "na|na|RefY|adj1" },
+        { "rightBrace_1", "na|na|RefY|adj2" },
+        { "rightBracket_0", "na|na|RefY|adj" },
+        { "round1Rect_0", "RefX|adj|na|na" },
+        { "round2DiagRect_0", "RefX|adj1|na|na" },
+        { "round2DiagRect_1", "RefX|adj2|na|na" },
+        { "round2SameRect_0", "RefX|adj1|na|na" },
+        { "round2SameRect_1", "RefX|adj2|na|na" },
+        { "roundRect_0", "RefX|adj|na|na" },
+        { "smileyFace_0", "na|na|RefY|adj" },
+        { "snip1Rect_0", "RefX|adj|na|na" },
+        { "snip2DiagRect_0", "RefX|adj1|na|na" },
+        { "snip2DiagRect_1", "RefX|adj2|na|na" },
+        { "snip2SameRect_0", "RefX|adj1|na|na" },
+        { "snip2SameRect_1", "RefX|adj2|na|na" },
+        { "snipRoundRect_0", "RefX|adj1|na|na" },
+        { "snipRoundRect_1", "RefX|adj2|na|na" },
+        { "star10_0", "na|na|RefY|adj" },
+        { "star12_0", "na|na|RefY|adj" },
+        { "star16_0", "na|na|RefY|adj" },
+        { "star24_0", "na|na|RefY|adj" },
+        { "star32_0", "na|na|RefY|adj" },
+        { "star4_0", "na|na|RefY|adj" },
+        { "star5_0", "na|na|RefY|adj" },
+        { "star6_0", "na|na|RefY|adj" },
+        { "star7_0", "na|na|RefY|adj" },
+        { "star8_0", "na|na|RefY|adj" },
+        { "stripedRightArrow_0", "na|na|RefY|adj1" },
+        { "stripedRightArrow_1", "RefX|adj2|na|na" },
+        { "sun_0", "RefX|adj|na|na" },
+        { "swooshArrow_0", "na|na|RefY|adj1" },
+        { "swooshArrow_1", "RefX|adj2|na|na" },
+        { "teardrop_0", "RefX|adj|na|na" },
+        { "trapezoid_0", "RefX|adj|na|na" },
+        { "triangle_0", "RefX|adj|na|na" },
+        { "upArrowCallout_0", "RefX|adj1|na|na" },
+        { "upArrowCallout_1", "RefX|adj2|na|na" },
+        { "upArrowCallout_2", "na|na|RefY|adj3" },
+        { "upArrowCallout_3", "na|na|RefY|adj4" },
+        { "upDownArrow_0", "RefX|adj1|na|na" },
+        { "upDownArrow_1", "na|na|RefY|adj2" },
+        { "upArrow_0", "RefX|adj1|na|na" },
+        { "upArrow_1", "na|na|RefY|adj2" },
+        { "upDownArrowCallout_0", "RefX|adj1|na|na" },
+        { "upDownArrowCallout_1", "RefX|adj2|na|na" },
+        { "upDownArrowCallout_2", "na|na|RefY|adj3" },
+        { "upDownArrowCallout_3", "na|na|RefY|adj4" },
+        { "uturnArrow_0", "RefX|adj1|na|na" },
+        { "uturnArrow_1", "RefX|adj2|na|na" },
+        { "uturnArrow_2", "na|na|RefY|adj3" },
+        { "uturnArrow_3", "RefX|adj4|na|na" },
+        { "uturnArrow_4", "na|na|RefY|adj5" },
+        { "verticalScroll_0", "na|na|RefY|adj" },
+        { "wave_0", "na|na|RefY|adj1" },
+        { "wave_1", "RefX|adj2|na|na" },
+        { "wedgeEllipseCallout_0", "RefX|adj1|RefY|adj2" },
+        { "wedgeRectCallout_0", "RefX|adj1|RefY|adj2" },
+        { "wedgeRoundRectCallout_0", "RefX|adj1|RefY|adj2" } };
+}
+
+static sal_Int32 lcl_getAdjIndexFromToken(const sal_Int32& nTokenPos, const OUString& rMapValue)
+{
+    OUString sAdjRef = rMapValue.getToken(nTokenPos, '|');
+    OUString sNumber; // number part from "adj1", "adj2" etc.
+    if (sAdjRef.startsWith("adj", &sNumber))
+    {
+        if (sNumber.isEmpty() || sNumber == "1")
+            return 0;
+        else
+            return sNumber.toInt32() - 1;
+    }
+    else
+        return -1;
+}
+
+void PresetOOXHandleAdj::GetOOXHandleAdjRelation(
+    const OUString& sFullOOXShapeName, const sal_Int32 nHandleIndex, OUString& rFirstRefType,
+    sal_Int32& rFirstAdjValueIndex, OUString& rSecondRefType, sal_Int32& rSecondAdjValueIndex)
+{
+    static const HandleAdjRelHashMap s_HashMap = []() {
+        HandleAdjRelHashMap aH;
+        for (const auto& item : aHandleAdjRelArray)
+            aH[item.sShape_Handle] = item.sAdjReferences;
+        return aH;
+    }();
+
+    OUString sKey;
+    OUString sValue;
+    rFirstRefType = "na";
+    rFirstAdjValueIndex = -1;
+    rSecondRefType = "na";
+    rSecondAdjValueIndex = -1;
+    if (sFullOOXShapeName.startsWith("ooxml-", &sKey))
+    {
+        sKey += "_" + OUString::number(nHandleIndex);
+        HandleAdjRelHashMap::const_iterator aHashIter(s_HashMap.find(sKey));
+        if (aHashIter != s_HashMap.end())
+            sValue = (*aHashIter).second;
+        else
+            return;
+    }
+    else
+        return;
+
+    rFirstRefType = sValue.getToken(0, '|');
+    rFirstAdjValueIndex = lcl_getAdjIndexFromToken(1, sValue);
+    rSecondRefType = sValue.getToken(2, '|');
+    rSecondAdjValueIndex = lcl_getAdjIndexFromToken(3, sValue);
+    return;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab cinoptions=b1,g0,N-s cinkeys+=0=break: */
diff --git a/svx/source/svdraw/presetooxhandleadjustmentrelations.hxx b/svx/source/svdraw/presetooxhandleadjustmentrelations.hxx
new file mode 100644
index 000000000..8bd2536f5
--- /dev/null
+++ b/svx/source/svdraw/presetooxhandleadjustmentrelations.hxx
@@ -0,0 +1,29 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4; fill-column: 100 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#ifndef INCLUDED_SVX_SOURCE_SVDRAW_PRESETOOXHANDLEADJUSTMENTRELATIONS_HXX
+#define INCLUDED_SVX_SOURCE_SVDRAW_PRESETOOXHANDLEADJUSTMENTRELATIONS_HXX
+#include <rtl/ustring.hxx>
+
+namespace PresetOOXHandleAdj
+{
+/* This method is used in SdrObjCustomShape::MergeDefaultAttributes() */
+void GetOOXHandleAdjRelation(
+    const OUString& sFullOOXShapeName, /* e.g. "ooxml-circularArrow" */
+    const sal_Int32 nHandleIndex, /* index in sequence from property "Handles" */
+    OUString& rFirstRefType, /* Propertyname, same as by pptx import, e.g. "RefX" */
+    sal_Int32& rFirstAdjValueIndex, /* index in sequence from property "AdjustmentValues" */
+    OUString& rSecondRefType, /* Propertyname, same as by pptx import, e.g. "RefY" */
+    sal_Int32& rSecondAdjValueIndex /* index in sequence from property "AdjustmentValues" */
+);
+}
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab cinoptions=b1,g0,N-s cinkeys+=0=break: */
diff --git a/svx/source/svdraw/sdrhittesthelper.cxx b/svx/source/svdraw/sdrhittesthelper.cxx
new file mode 100644
index 000000000..2a93dc372
--- /dev/null
+++ b/svx/source/svdraw/sdrhittesthelper.cxx
@@ -0,0 +1,175 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/sdrhittesthelper.hxx>
+#include <svx/obj3d.hxx>
+#include <svx/helperhittest3d.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <svx/sdr/contact/viewobjectcontact.hxx>
+#include <svx/sdr/contact/displayinfo.hxx>
+#include <svx/sdr/contact/objectcontact.hxx>
+#include <drawinglayer/processor2d/hittestprocessor2d.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+
+
+// #i101872# new Object HitTest as View-tooling
+
+SdrObject* SdrObjectPrimitiveHit(
+    const SdrObject& rObject,
+    const Point& rPnt,
+    sal_uInt16 nTol,
+    const SdrPageView& rSdrPageView,
+    const SdrLayerIDSet* pVisiLayer,
+    bool bTextOnly,
+    drawinglayer::primitive2d::Primitive2DContainer* pHitContainer)
+{
+    SdrObject* pResult = nullptr;
+
+    if(rObject.GetSubList() && rObject.GetSubList()->GetObjCount())
+    {
+        // group or scene with content. Single 3D objects also have a
+        // true == rObject.GetSubList(), but no content
+        pResult = SdrObjListPrimitiveHit(*rObject.GetSubList(), rPnt, nTol, rSdrPageView, pVisiLayer, bTextOnly);
+    }
+    else
+    {
+        if( rObject.IsVisible() && (!pVisiLayer || pVisiLayer->IsSet(rObject.GetLayer())))
+        {
+            // single object, 3d object, empty scene or empty group. Check if
+            // it's a single 3D object
+            const E3dCompoundObject* pE3dCompoundObject = dynamic_cast< const E3dCompoundObject* >(&rObject);
+
+            if(pE3dCompoundObject)
+            {
+                const basegfx::B2DPoint aHitPosition(rPnt.X(), rPnt.Y());
+
+                if(checkHitSingle3DObject(aHitPosition, *pE3dCompoundObject))
+                {
+                    pResult = const_cast< E3dCompoundObject* >(pE3dCompoundObject);
+                }
+            }
+            else
+            {
+                // not a single 3D object; Check in first PageWindow using primitives (only SC
+                // with split views uses multiple PageWindows nowadays)
+                if(rSdrPageView.PageWindowCount())
+                {
+                    const double fLogicTolerance(nTol);
+                    const basegfx::B2DPoint aHitPosition(rPnt.X(), rPnt.Y());
+                    const sdr::contact::ViewObjectContact& rVOC = rObject.GetViewContact().GetViewObjectContact(
+                        rSdrPageView.GetPageWindow(0)->GetObjectContact());
+
+                    if(ViewObjectContactPrimitiveHit(rVOC, aHitPosition, fLogicTolerance, bTextOnly, pHitContainer))
+                    {
+                          pResult = const_cast< SdrObject* >(&rObject);
+                    }
+                }
+            }
+        }
+    }
+
+    return pResult;
+}
+
+
+SdrObject* SdrObjListPrimitiveHit(
+    const SdrObjList& rList,
+    const Point& rPnt,
+    sal_uInt16 nTol,
+    const SdrPageView& rSdrPageView,
+    const SdrLayerIDSet* pVisiLayer,
+    bool bTextOnly)
+{
+    size_t nObjNum(rList.GetObjCount());
+    SdrObject* pRetval = nullptr;
+
+    while(!pRetval && nObjNum > 0)
+    {
+        nObjNum--;
+        SdrObject* pObj = rList.GetObj(nObjNum);
+
+        pRetval = SdrObjectPrimitiveHit(*pObj, rPnt, nTol, rSdrPageView, pVisiLayer, bTextOnly);
+    }
+
+    return pRetval;
+}
+
+
+bool ViewObjectContactPrimitiveHit(
+    const sdr::contact::ViewObjectContact& rVOC,
+    const basegfx::B2DPoint& rHitPosition,
+    double fLogicHitTolerance,
+    bool bTextOnly,
+    drawinglayer::primitive2d::Primitive2DContainer* pHitContainer)
+{
+    basegfx::B2DRange aObjectRange(rVOC.getObjectRange());
+
+    if(!aObjectRange.isEmpty())
+    {
+        // first do a rough B2DRange based HitTest; do not forget to
+        // include the HitTolerance if given
+        if(basegfx::fTools::more(fLogicHitTolerance, 0.0))
+        {
+            aObjectRange.grow(fLogicHitTolerance);
+        }
+
+        if(aObjectRange.isInside(rHitPosition))
+        {
+            // get primitive sequence
+            sdr::contact::DisplayInfo aDisplayInfo;
+            const drawinglayer::primitive2d::Primitive2DContainer& rSequence(rVOC.getPrimitive2DSequence(aDisplayInfo));
+
+            if(!rSequence.empty())
+            {
+                // create a HitTest processor
+                const drawinglayer::geometry::ViewInformation2D& rViewInformation2D = rVOC.GetObjectContact().getViewInformation2D();
+                drawinglayer::processor2d::HitTestProcessor2D aHitTestProcessor2D(
+                    rViewInformation2D,
+                    rHitPosition,
+                    fLogicHitTolerance,
+                    bTextOnly);
+
+                // ask for HitStack
+                aHitTestProcessor2D.collectHitStack(true);
+
+                // feed it with the primitives
+                aHitTestProcessor2D.process(rSequence);
+
+                // deliver result
+                if (aHitTestProcessor2D.getHit())
+                {
+                    if (pHitContainer)
+                    {
+                        // fetch HitStack primitives if requested
+                        *pHitContainer = aHitTestProcessor2D.getHitStack();
+                    }
+
+                    return true;
+                }
+            }
+        }
+    }
+
+    return false;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/sdrmasterpagedescriptor.cxx b/svx/source/svdraw/sdrmasterpagedescriptor.cxx
new file mode 100644
index 000000000..1d0843918
--- /dev/null
+++ b/svx/source/svdraw/sdrmasterpagedescriptor.cxx
@@ -0,0 +1,104 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/sdrmasterpagedescriptor.hxx>
+#include <sdr/contact/viewcontactofmasterpagedescriptor.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/xdef.hxx>
+#include <svx/xfillit0.hxx>
+#include <svl/itemset.hxx>
+
+using namespace com::sun::star;
+
+namespace sdr
+{
+    MasterPageDescriptor::MasterPageDescriptor(SdrPage& aOwnerPage, SdrPage& aUsedPage)
+    :   maOwnerPage(aOwnerPage),
+        maUsedPage(aUsedPage)
+    {
+        // all layers visible
+        maVisibleLayers.SetAll();
+
+        // register at used page
+        maUsedPage.AddPageUser(*this);
+    }
+
+    MasterPageDescriptor::~MasterPageDescriptor()
+    {
+        // de-register at used page
+        maUsedPage.RemovePageUser(*this);
+
+        mpViewContact.reset();
+    }
+
+    // ViewContact part
+    sdr::contact::ViewContact& MasterPageDescriptor::GetViewContact() const
+    {
+        if(!mpViewContact)
+        {
+            mpViewContact.reset(
+                new sdr::contact::ViewContactOfMasterPageDescriptor(*const_cast< MasterPageDescriptor* >(this)) );
+        }
+
+        return *mpViewContact;
+    }
+
+    // this method is called from the destructor of the referenced page.
+    // do all necessary action to forget the page. It is not necessary to call
+    // RemovePageUser(), that is done from the destructor.
+    void MasterPageDescriptor::PageInDestruction(const SdrPage& /*rPage*/)
+    {
+        maOwnerPage.TRG_ClearMasterPage();
+    }
+
+    void MasterPageDescriptor::SetVisibleLayers(const SdrLayerIDSet& rNew)
+    {
+        if(rNew != maVisibleLayers)
+        {
+            maVisibleLayers = rNew;
+            GetViewContact().ActionChanged();
+        }
+    }
+
+
+    const SdrPageProperties* MasterPageDescriptor::getCorrectSdrPageProperties() const
+    {
+        const SdrPage* pCorrectPage = &GetOwnerPage();
+        const SdrPageProperties* pCorrectProperties = &pCorrectPage->getSdrPageProperties();
+
+        if(drawing::FillStyle_NONE == pCorrectProperties->GetItemSet().Get(XATTR_FILLSTYLE).GetValue())
+        {
+            pCorrectPage = &GetUsedPage();
+            pCorrectProperties = &pCorrectPage->getSdrPageProperties();
+        }
+
+        if(pCorrectPage->IsMasterPage() && !pCorrectProperties->GetStyleSheet())
+        {
+            // #i110846# Suppress SdrPage FillStyle for MasterPages without StyleSheets,
+            // else the PoolDefault (XFILL_COLOR and Blue8) will be used. Normally, all
+            // MasterPages should have a StyleSheet exactly for this reason, but historically
+            // e.g. the Notes MasterPage has no StyleSheet set (and there maybe others).
+            pCorrectProperties = nullptr;
+        }
+
+        return pCorrectProperties;
+    }
+} // end of namespace sdr
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/sdrpagewindow.cxx b/svx/source/svdraw/sdrpagewindow.cxx
new file mode 100644
index 000000000..6d197dab5
--- /dev/null
+++ b/svx/source/svdraw/sdrpagewindow.cxx
@@ -0,0 +1,519 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/sdrpagewindow.hxx>
+#include <com/sun/star/awt/XWindow.hpp>
+#include <com/sun/star/awt/PosSize.hpp>
+#include <com/sun/star/lang/XMultiServiceFactory.hpp>
+#include <comphelper/lok.hxx>
+#include <comphelper/processfactory.hxx>
+#include <toolkit/helper/vclunohelper.hxx>
+#include <svx/svdview.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <svx/sdr/contact/objectcontactofpageview.hxx>
+#include <svx/sdr/contact/displayinfo.hxx>
+#include <svx/fmview.hxx>
+#include <sfx2/lokhelper.hxx>
+#include <tools/debug.hxx>
+
+using namespace ::com::sun::star;
+
+struct SdrPageWindow::Impl
+{
+    // #110094# ObjectContact section
+    mutable sdr::contact::ObjectContact* mpObjectContact;
+
+    // the SdrPageView this window belongs to
+    SdrPageView& mrPageView;
+
+    // the PaintWindow to paint on. Here is access to OutDev etc.
+    // #i72752# change to pointer to allow patcing it in DrawLayer() if necessary
+    SdrPaintWindow* mpPaintWindow;
+    SdrPaintWindow* mpOriginalPaintWindow;
+
+    // UNO stuff for xControls
+    uno::Reference<awt::XControlContainer> mxControlContainer;
+
+    Impl( SdrPageView& rPageView, SdrPaintWindow& rPaintWindow ) :
+        mpObjectContact(nullptr),
+        mrPageView(rPageView),
+        mpPaintWindow(&rPaintWindow),
+        mpOriginalPaintWindow(nullptr)
+    {
+    }
+};
+
+
+uno::Reference<awt::XControlContainer> const & SdrPageWindow::GetControlContainer( bool _bCreateIfNecessary ) const
+{
+    if (!mpImpl->mxControlContainer.is() && _bCreateIfNecessary)
+    {
+        SdrView& rView = GetPageView().GetView();
+
+        const SdrPaintWindow& rPaintWindow( GetOriginalPaintWindow() ? *GetOriginalPaintWindow() : GetPaintWindow() );
+        if ( rPaintWindow.OutputToWindow() && !rView.IsPrintPreview() )
+        {
+            vcl::Window& rWindow = dynamic_cast< vcl::Window& >( rPaintWindow.GetOutputDevice() );
+            const_cast< SdrPageWindow* >( this )->mpImpl->mxControlContainer = VCLUnoHelper::CreateControlContainer( &rWindow );
+
+            // #100394# xC->setVisible triggers window->Show() and this has
+            // problems when the view is not completely constructed which may
+            // happen when loading. This leads to accessibility broadcasts which
+            // throw asserts due to the not finished view. All this chain can be avoided
+            // since xC->setVisible is here called only for the side effect in
+            // UnoControlContainer::setVisible(...) which calls createPeer(...).
+            // This will now be called directly from here.
+
+            uno::Reference< awt::XControl > xControl(mpImpl->mxControlContainer, uno::UNO_QUERY);
+            if(xControl.is())
+            {
+                uno::Reference< uno::XInterface > xContext = xControl->getContext();
+                if(!xContext.is())
+                {
+                    xControl->createPeer( uno::Reference<awt::XToolkit>(), uno::Reference<awt::XWindowPeer>() );
+                }
+            }
+        }
+        else
+        {
+            // Printer and VirtualDevice, or rather: no OutDev
+            uno::Reference< lang::XMultiServiceFactory > xFactory( ::comphelper::getProcessServiceFactory() );
+            const_cast< SdrPageWindow* >( this )->mpImpl->mxControlContainer.set(xFactory->createInstance("com.sun.star.awt.UnoControlContainer"), uno::UNO_QUERY);
+            uno::Reference< awt::XControlModel > xModel(xFactory->createInstance("com.sun.star.awt.UnoControlContainerModel"), uno::UNO_QUERY);
+            uno::Reference< awt::XControl > xControl(mpImpl->mxControlContainer, uno::UNO_QUERY);
+            if (xControl.is())
+                xControl->setModel(xModel);
+
+            OutputDevice& rOutDev = rPaintWindow.GetOutputDevice();
+            Point aPosPix = rOutDev.GetMapMode().GetOrigin();
+            Size aSizePix = rOutDev.GetOutputSizePixel();
+
+            uno::Reference< awt::XWindow > xContComp(mpImpl->mxControlContainer, uno::UNO_QUERY);
+            if( xContComp.is() )
+                xContComp->setPosSize(aPosPix.X(), aPosPix.Y(), aSizePix.Width(), aSizePix.Height(), awt::PosSize::POSSIZE);
+        }
+
+        FmFormView* pViewAsFormView = dynamic_cast< FmFormView* >( &rView );
+        if ( pViewAsFormView )
+            pViewAsFormView->InsertControlContainer(mpImpl->mxControlContainer);
+    }
+    return mpImpl->mxControlContainer;
+}
+
+SdrPageWindow::SdrPageWindow(SdrPageView& rPageView, SdrPaintWindow& rPaintWindow) :
+    mpImpl(new Impl(rPageView, rPaintWindow))
+{
+}
+
+SdrPageWindow::~SdrPageWindow()
+{
+    // #i26631#
+    ResetObjectContact();
+
+    if (mpImpl->mxControlContainer.is())
+    {
+        auto & rView = static_cast<SdrPaintView &>(GetPageView().GetView());
+
+        // notify derived views
+        FmFormView* pViewAsFormView = dynamic_cast< FmFormView* >( &rView );
+        if ( pViewAsFormView )
+            pViewAsFormView->RemoveControlContainer(mpImpl->mxControlContainer);
+
+        // dispose the control container
+        uno::Reference< lang::XComponent > xComponent(mpImpl->mxControlContainer, uno::UNO_QUERY);
+        xComponent->dispose();
+    }
+}
+
+SdrPageView& SdrPageWindow::GetPageView() const
+{
+    return mpImpl->mrPageView;
+}
+
+SdrPaintWindow& SdrPageWindow::GetPaintWindow() const
+{
+    return *mpImpl->mpPaintWindow;
+}
+
+const SdrPaintWindow* SdrPageWindow::GetOriginalPaintWindow() const
+{
+    return mpImpl->mpOriginalPaintWindow;
+}
+
+// OVERLAY MANAGER
+rtl::Reference< sdr::overlay::OverlayManager > const & SdrPageWindow::GetOverlayManager() const
+{
+    return GetPaintWindow().GetOverlayManager();
+}
+
+SdrPaintWindow* SdrPageWindow::patchPaintWindow(SdrPaintWindow& rPaintWindow)
+{
+    if (!mpImpl->mpOriginalPaintWindow)
+    {
+        // first patch
+        mpImpl->mpOriginalPaintWindow = mpImpl->mpPaintWindow;
+        mpImpl->mpPaintWindow = &rPaintWindow;
+        mpImpl->mpOriginalPaintWindow->setPatched(&rPaintWindow);
+        return mpImpl->mpOriginalPaintWindow;
+    }
+    else
+    {
+        // second or more patch
+        auto pPreviousPaintWindow = mpImpl->mpPaintWindow;
+        mpImpl->mpPaintWindow = &rPaintWindow;
+        mpImpl->mpOriginalPaintWindow->setPatched(&rPaintWindow);
+        return pPreviousPaintWindow;
+    }
+}
+
+void SdrPageWindow::unpatchPaintWindow(SdrPaintWindow* pPreviousPaintWindow)
+{
+    if (pPreviousPaintWindow == mpImpl->mpOriginalPaintWindow)
+    {
+        // first patch
+        mpImpl->mpPaintWindow = mpImpl->mpOriginalPaintWindow;
+        mpImpl->mpOriginalPaintWindow->setPatched(nullptr);
+        mpImpl->mpOriginalPaintWindow = nullptr;
+    }
+    else
+    {
+        // second or more patch
+        mpImpl->mpPaintWindow = pPreviousPaintWindow;
+        mpImpl->mpOriginalPaintWindow->setPatched(pPreviousPaintWindow);
+    }
+}
+
+void SdrPageWindow::PrePaint()
+{
+    // give OC the chance to do ProcessDisplay preparations
+    if(HasObjectContact())
+    {
+        GetObjectContact().PrepareProcessDisplay();
+    }
+}
+
+void SdrPageWindow::PrepareRedraw(const vcl::Region& rReg)
+{
+    // give OC the chance to do ProcessDisplay preparations
+    if(HasObjectContact())
+    {
+        GetObjectContact().PrepareProcessDisplay();
+    }
+
+    // if necessary, remember changed RedrawArea at PaintWindow for usage with
+    // overlay and PreRenderDevice stuff
+    GetPaintWindow().SetRedrawRegion(rReg);
+}
+
+
+// clip test
+#ifdef CLIPPER_TEST
+#include <svx/svdopath.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <tools/helpers.hxx>
+#include <basegfx/polygon/b2dpolygoncutandtouch.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/polygon/b2dpolygonclipper.hxx>
+
+// for ::std::sort
+#include <algorithm>
+
+namespace
+{
+    void impPaintStrokePolygon(const basegfx::B2DPolygon& rCandidate, OutputDevice& rOutDev, Color aColor)
+    {
+        basegfx::B2DPolygon aCandidate(rCandidate);
+
+        if(aCandidate.areControlPointsUsed())
+        {
+            aCandidate = basegfx::utils::adaptiveSubdivideByAngle(rCandidate);
+        }
+
+        if(aCandidate.count())
+        {
+            const sal_uInt32 nLoopCount(aCandidate.isClosed() ? aCandidate.count() : aCandidate.count() - 1);
+            rOutDev.SetFillColor();
+            rOutDev.SetLineColor(aColor);
+
+            for(sal_uInt32 a(0); a < nLoopCount; a++)
+            {
+                const basegfx::B2DPoint aBStart(aCandidate.getB2DPoint(a));
+                const basegfx::B2DPoint aBEnd(aCandidate.getB2DPoint((a + 1) % aCandidate.count()));
+                const Point aStart(FRound(aBStart.getX()), FRound(aBStart.getY()));
+                const Point aEnd(FRound(aBEnd.getX()), FRound(aBEnd.getY()));
+                rOutDev.DrawLine(aStart, aEnd);
+            }
+        }
+    }
+
+    void impTryTest(const SdrPageView& rPageView, OutputDevice& rOutDev)
+    {
+        if(rPageView.GetPage() && rPageView.GetPage()->GetObjCount() >= 2)
+        {
+            SdrPage* pPage = rPageView.GetPage();
+            SdrObject* pObjA = pPage->GetObj(0);
+
+            if(dynamic_cast<const SdrPathObj*>( pObjA))
+            {
+                basegfx::B2DPolyPolygon aPolyA(pObjA->GetPathPoly());
+                aPolyA = basegfx::utils::correctOrientations(aPolyA);
+
+                basegfx::B2DPolyPolygon aPolyB;
+
+                for(sal_uInt32 a(1); a < rPageView.GetPage()->GetObjCount(); a++)
+                {
+                    SdrObject* pObjB = pPage->GetObj(a);
+
+                    if(dynamic_cast<const SdrPathObj*>( pObjB))
+                    {
+                        basegfx::B2DPolyPolygon aCandidate(pObjB->GetPathPoly());
+                        aCandidate = basegfx::utils::correctOrientations(aCandidate);
+                        aPolyB.append(aCandidate);
+                    }
+                }
+
+                if(aPolyA.count() && aPolyA.isClosed() && aPolyB.count())
+                {
+                    // poly A is the clipregion, clip poly b against it. Algo depends on
+                    // poly b being closed.
+                    basegfx::B2DPolyPolygon aResult(basegfx::utils::clipPolyPolygonOnPolyPolygon(aPolyB, aPolyA));
+
+                    for(auto const& rPolygon : aResult)
+                    {
+                        int nR = comphelper::rng::uniform_int_distribution(0, 254);
+                        int nG = comphelper::rng::uniform_int_distribution(0, 254);
+                        int nB = comphelper::rng::uniform_int_distribution(0, 254);
+                        Color aColor(nR, nG, nB);
+                        impPaintStrokePolygon(rPolygon, rOutDev, aColor);
+                    }
+                }
+            }
+        }
+    }
+} // end of anonymous namespace
+#endif // CLIPPER_TEST
+
+
+void SdrPageWindow::RedrawAll( sdr::contact::ViewObjectContactRedirector* pRedirector )
+{
+    // set Redirector
+    GetObjectContact().SetViewObjectContactRedirector(pRedirector);
+
+    // set PaintingPageView
+    const SdrView& rView = mpImpl->mrPageView.GetView();
+    SdrModel& rModel = *(rView.GetModel());
+
+    // get to be processed layers
+    const bool bPrinter(GetPaintWindow().OutputToPrinter());
+    SdrLayerIDSet aProcessLayers = bPrinter ? mpImpl->mrPageView.GetPrintableLayers() : mpImpl->mrPageView.GetVisibleLayers();
+
+    // create PaintInfoRec; use Rectangle only temporarily
+    const vcl::Region& rRegion = GetPaintWindow().GetRedrawRegion();
+
+    // create processing data
+    sdr::contact::DisplayInfo aDisplayInfo;
+
+    // Draw all layers. do NOT draw form layer from CompleteRedraw, this is done separately
+    // as a single layer paint
+    const SdrLayerAdmin& rLayerAdmin = rModel.GetLayerAdmin();
+    const SdrLayerID nControlLayerId = rLayerAdmin.GetLayerID(rLayerAdmin.GetControlLayerName());
+    aProcessLayers.Clear(nControlLayerId);
+
+    // still something to paint?
+    if(!aProcessLayers.IsEmpty())
+    {
+        aDisplayInfo.SetProcessLayers(aProcessLayers);
+
+        // Set region as redraw area
+        aDisplayInfo.SetRedrawArea(rRegion);
+
+        // Draw/Impress
+        aDisplayInfo.SetPageProcessingActive(rView.IsPagePaintingAllowed()); // #i72889#
+
+        // paint page
+        GetObjectContact().ProcessDisplay(aDisplayInfo);
+    }
+
+    // reset redirector
+    GetObjectContact().SetViewObjectContactRedirector(nullptr);
+
+    // LineClip test
+#ifdef CLIPPER_TEST
+    if(true)
+    {
+        impTryTest(GetPageView(), GetPaintWindow().GetOutputDevice());
+    }
+#endif // CLIPPER_TEST
+}
+
+void SdrPageWindow::RedrawLayer(const SdrLayerID* pId,
+        sdr::contact::ViewObjectContactRedirector* pRedirector,
+        basegfx::B2IRectangle const*const pPageFrame)
+{
+    // set redirector
+    GetObjectContact().SetViewObjectContactRedirector(pRedirector);
+
+    // set PaintingPageView
+    const SdrView& rView = mpImpl->mrPageView.GetView();
+    SdrModel& rModel = *(rView.GetModel());
+
+    // get the layers to process
+    const bool bPrinter(GetPaintWindow().OutputToPrinter());
+    SdrLayerIDSet aProcessLayers = bPrinter ? mpImpl->mrPageView.GetPrintableLayers() : mpImpl->mrPageView.GetVisibleLayers();
+
+    // is the given layer visible at all?
+    if(aProcessLayers.IsSet(*pId))
+    {
+        // find out if we are painting the ControlLayer
+        const SdrLayerAdmin& rLayerAdmin = rModel.GetLayerAdmin();
+        const SdrLayerID nControlLayerId = rLayerAdmin.GetLayerID(rLayerAdmin.GetControlLayerName());
+        const bool bControlLayerProcessingActive(nControlLayerId == *pId);
+
+        // create PaintInfoRec, use Rectangle only temporarily
+        const vcl::Region& rRegion = GetPaintWindow().GetRedrawRegion();
+
+        // create processing data
+        sdr::contact::DisplayInfo aDisplayInfo;
+
+        // is it the control layer? If Yes, set flag
+        aDisplayInfo.SetControlLayerProcessingActive(bControlLayerProcessingActive);
+
+        // Draw just the one given layer
+        aProcessLayers.ClearAll();
+        aProcessLayers.Set(*pId);
+
+        aDisplayInfo.SetProcessLayers(aProcessLayers);
+
+        // Set region as redraw area
+        aDisplayInfo.SetRedrawArea(rRegion);
+
+        // Writer or calc, coming from original RedrawOneLayer.
+        // #i72889# no page painting for layer painting
+        aDisplayInfo.SetPageProcessingActive(false);
+
+        if (pPageFrame) // Writer page frame for anchor based clipping
+        {
+            aDisplayInfo.SetWriterPageFrame(*pPageFrame);
+        }
+
+        // paint page
+        GetObjectContact().ProcessDisplay(aDisplayInfo);
+    }
+
+    // reset redirector
+    GetObjectContact().SetViewObjectContactRedirector(nullptr);
+}
+
+// Invalidate call, used from ObjectContact(OfPageView) in InvalidatePartOfView(...)
+void SdrPageWindow::InvalidatePageWindow(const basegfx::B2DRange& rRange)
+{
+    if (GetPageView().IsVisible() && GetPaintWindow().OutputToWindow())
+    {
+        const SvtOptionsDrawinglayer aDrawinglayerOpt;
+        OutputDevice& rWindow(GetPaintWindow().GetOutputDevice());
+        basegfx::B2DRange aDiscreteRange(rRange);
+        aDiscreteRange.transform(rWindow.GetViewTransformation());
+
+        if (aDrawinglayerOpt.IsAntiAliasing())
+        {
+            // invalidate one discrete unit more under the assumption that AA
+            // needs one pixel more
+            aDiscreteRange.grow(1.0);
+        }
+
+        const tools::Rectangle aVCLDiscreteRectangle(
+            static_cast<long>(floor(aDiscreteRange.getMinX())),
+            static_cast<long>(floor(aDiscreteRange.getMinY())),
+            static_cast<long>(ceil(aDiscreteRange.getMaxX())),
+            static_cast<long>(ceil(aDiscreteRange.getMaxY())));
+
+        const bool bWasMapModeEnabled(rWindow.IsMapModeEnabled());
+        rWindow.EnableMapMode(false);
+        GetPageView().GetView().InvalidateOneWin(rWindow, aVCLDiscreteRectangle);
+        rWindow.EnableMapMode(bWasMapModeEnabled);
+    }
+    else if (comphelper::LibreOfficeKit::isActive())
+    {
+        // we don't really have to have a paint window with LOK; OTOH we know
+        // that the drawinglayer units are 100ths of mm, so they are easy to
+        // convert to twips
+        const tools::Rectangle aRect100thMM(
+            static_cast<long>(floor(rRange.getMinX())),
+            static_cast<long>(floor(rRange.getMinY())),
+            static_cast<long>(ceil(rRange.getMaxX())),
+            static_cast<long>(ceil(rRange.getMaxY())));
+
+        const tools::Rectangle aRectTwips = OutputDevice::LogicToLogic(aRect100thMM, MapMode(MapUnit::Map100thMM), MapMode(MapUnit::MapTwip));
+
+        if (SfxViewShell* pViewShell = SfxViewShell::Current())
+            SfxLokHelper::notifyInvalidation(pViewShell, aRectTwips.toString());
+    }
+}
+
+// ObjectContact section
+const sdr::contact::ObjectContact& SdrPageWindow::GetObjectContact() const
+{
+    if (!mpImpl->mpObjectContact)
+    {
+        mpImpl->mpObjectContact = GetPageView().GetView().createViewSpecificObjectContact(
+            const_cast<SdrPageWindow&>(*this),
+            "svx::svdraw::SdrPageWindow mpObjectContact");
+    }
+
+    return *mpImpl->mpObjectContact;
+}
+
+sdr::contact::ObjectContact& SdrPageWindow::GetObjectContact()
+{
+    if (!mpImpl->mpObjectContact)
+    {
+        mpImpl->mpObjectContact = GetPageView().GetView().createViewSpecificObjectContact(
+             *this,
+             "svx::svdraw::SdrPageWindow mpObjectContact" );
+    }
+
+    return *mpImpl->mpObjectContact;
+}
+
+bool SdrPageWindow::HasObjectContact() const
+{
+    return mpImpl->mpObjectContact != nullptr;
+}
+
+// #i26631#
+void SdrPageWindow::ResetObjectContact()
+{
+    if (mpImpl->mpObjectContact)
+    {
+        delete mpImpl->mpObjectContact;
+        mpImpl->mpObjectContact = nullptr;
+    }
+}
+
+void SdrPageWindow::SetDesignMode( bool _bDesignMode ) const
+{
+    const sdr::contact::ObjectContactOfPageView* pOC = dynamic_cast< const sdr::contact::ObjectContactOfPageView* >( &GetObjectContact() );
+    DBG_ASSERT( pOC, "SdrPageWindow::SetDesignMode: invalid object contact!" );
+    if ( pOC )
+        pOC->SetUNOControlsDesignMode( _bDesignMode );
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/sdrpaintwindow.cxx b/svx/source/svdraw/sdrpaintwindow.cxx
new file mode 100644
index 000000000..f4561275b
--- /dev/null
+++ b/svx/source/svdraw/sdrpaintwindow.cxx
@@ -0,0 +1,343 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <comphelper/lok.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <sdr/overlay/overlaymanagerbuffered.hxx>
+#include <svx/svdpntv.hxx>
+#include <vcl/gdimtf.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/settings.hxx>
+#include <set>
+#include <vector>
+
+namespace {
+
+//rhbz#1007697 do this in two loops, one to collect the candidates
+//and another to update them because updating a candidate can
+//trigger the candidate to be deleted, so asking for its
+//sibling after that is going to fail hard
+class CandidateMgr
+{
+    std::vector<VclPtr<vcl::Window> > m_aCandidates;
+    std::set<VclPtr<vcl::Window> > m_aDeletedCandidates;
+    DECL_LINK(WindowEventListener, VclWindowEvent&, void);
+public:
+    void PaintTransparentChildren(vcl::Window const & rWindow, tools::Rectangle const& rPixelRect);
+    ~CandidateMgr();
+};
+
+}
+
+IMPL_LINK(CandidateMgr, WindowEventListener, VclWindowEvent&, rEvent, void)
+{
+    vcl::Window* pWindow = rEvent.GetWindow();
+    if (rEvent.GetId() == VclEventId::ObjectDying)
+    {
+        m_aDeletedCandidates.insert(pWindow);
+    }
+}
+
+CandidateMgr::~CandidateMgr()
+{
+    for (VclPtr<vcl::Window>& pCandidate : m_aCandidates)
+    {
+        if (m_aDeletedCandidates.find(pCandidate) != m_aDeletedCandidates.end())
+            continue;
+        pCandidate->RemoveEventListener(LINK(this, CandidateMgr, WindowEventListener));
+    }
+}
+
+void PaintTransparentChildren(vcl::Window const & rWindow, tools::Rectangle const& rPixelRect)
+{
+    if (!rWindow.IsChildTransparentModeEnabled())
+        return;
+
+    CandidateMgr aManager;
+    aManager.PaintTransparentChildren(rWindow, rPixelRect);
+}
+
+void CandidateMgr::PaintTransparentChildren(vcl::Window const & rWindow, tools::Rectangle const& rPixelRect)
+{
+    vcl::Window * pCandidate = rWindow.GetWindow( GetWindowType::FirstChild );
+    while (pCandidate)
+    {
+        if (pCandidate->IsPaintTransparent())
+        {
+            const tools::Rectangle aCandidatePosSizePixel(
+                            pCandidate->GetPosPixel(),
+                            pCandidate->GetSizePixel());
+
+            if (aCandidatePosSizePixel.IsOver(rPixelRect))
+            {
+                m_aCandidates.emplace_back(pCandidate);
+                pCandidate->AddEventListener(LINK(this, CandidateMgr, WindowEventListener));
+            }
+        }
+        pCandidate = pCandidate->GetWindow( GetWindowType::Next );
+    }
+
+    for (const auto& rpCandidate : m_aCandidates)
+    {
+        pCandidate = rpCandidate.get();
+        if (m_aDeletedCandidates.find(pCandidate) != m_aDeletedCandidates.end())
+            continue;
+        //rhbz#1007697 this can cause the window itself to be
+        //deleted. So we are listening to see if that happens
+        //and if so, then skip the update
+        pCandidate->Invalidate(InvalidateFlags::NoTransparent|InvalidateFlags::Children);
+        // important: actually paint the child here!
+        if (m_aDeletedCandidates.find(pCandidate) != m_aDeletedCandidates.end())
+            continue;
+        pCandidate->PaintImmediately();
+    }
+}
+
+SdrPreRenderDevice::SdrPreRenderDevice(OutputDevice& rOriginal)
+:   mpOutputDevice(&rOriginal),
+    mpPreRenderDevice(VclPtr<VirtualDevice>::Create())
+{
+}
+
+SdrPreRenderDevice::~SdrPreRenderDevice()
+{
+    mpPreRenderDevice.disposeAndClear();
+}
+
+void SdrPreRenderDevice::PreparePreRenderDevice()
+{
+    // compare size of mpPreRenderDevice with size of visible area
+    if(mpPreRenderDevice->GetOutputSizePixel() != mpOutputDevice->GetOutputSizePixel())
+    {
+        mpPreRenderDevice->SetOutputSizePixel(mpOutputDevice->GetOutputSizePixel());
+    }
+
+    // Also compare the MapModes for zoom/scroll changes
+    if(mpPreRenderDevice->GetMapMode() != mpOutputDevice->GetMapMode())
+    {
+        mpPreRenderDevice->SetMapMode(mpOutputDevice->GetMapMode());
+    }
+
+    // #i29186#
+    mpPreRenderDevice->SetDrawMode(mpOutputDevice->GetDrawMode());
+    mpPreRenderDevice->SetSettings(mpOutputDevice->GetSettings());
+}
+
+void SdrPreRenderDevice::OutputPreRenderDevice(const vcl::Region& rExpandedRegion)
+{
+    // region to pixels
+    const vcl::Region aRegionPixel(mpOutputDevice->LogicToPixel(rExpandedRegion));
+    //RegionHandle aRegionHandle(aRegionPixel.BeginEnumRects());
+    //Rectangle aRegionRectanglePixel;
+
+    // MapModes off
+    bool bMapModeWasEnabledDest(mpOutputDevice->IsMapModeEnabled());
+    bool bMapModeWasEnabledSource(mpPreRenderDevice->IsMapModeEnabled());
+    mpOutputDevice->EnableMapMode(false);
+    mpPreRenderDevice->EnableMapMode(false);
+
+    RectangleVector aRectangles;
+    aRegionPixel.GetRegionRectangles(aRectangles);
+
+    for(const auto& rRect : aRectangles)
+    {
+        // for each rectangle, copy the area
+        const Point aTopLeft(rRect.TopLeft());
+        const Size aSize(rRect.GetSize());
+
+        mpOutputDevice->DrawOutDev(
+            aTopLeft, aSize,
+            aTopLeft, aSize,
+            *mpPreRenderDevice);
+    }
+
+    mpOutputDevice->EnableMapMode(bMapModeWasEnabledDest);
+    mpPreRenderDevice->EnableMapMode(bMapModeWasEnabledSource);
+}
+
+void SdrPaintView::InitOverlayManager(rtl::Reference<sdr::overlay::OverlayManager> xOverlayManager) const
+{
+    Color aColA(getOptionsDrawinglayer().GetStripeColorA());
+    Color aColB(getOptionsDrawinglayer().GetStripeColorB());
+
+    if (Application::GetSettings().GetStyleSettings().GetHighContrastMode())
+    {
+        aColA = aColB = Application::GetSettings().GetStyleSettings().GetHighlightColor();
+        aColB.Invert();
+    }
+
+    xOverlayManager->setStripeColorA(aColA);
+    xOverlayManager->setStripeColorB(aColB);
+    xOverlayManager->setStripeLengthPixel(getOptionsDrawinglayer().GetStripeLength());
+}
+
+rtl::Reference<sdr::overlay::OverlayManager> SdrPaintView::CreateOverlayManager(OutputDevice& rOutputDevice) const
+{
+    rtl::Reference<sdr::overlay::OverlayManager> xOverlayManager;
+    // is it a window?
+    if (OUTDEV_WINDOW == rOutputDevice.GetOutDevType())
+    {
+        vcl::Window& rWindow = dynamic_cast<vcl::Window&>(rOutputDevice);
+        // decide which OverlayManager to use
+        if (IsBufferedOverlayAllowed() && !rWindow.SupportsDoubleBuffering())
+        {
+            // buffered OverlayManager, buffers its background and refreshes from there
+            // for pure overlay changes (no system redraw). The 3rd parameter specifies
+            // whether that refresh itself will use a 2nd vdev to avoid flickering.
+            // Also hand over the old OverlayManager if existent; this means to take over
+            // the registered OverlayObjects from it
+            xOverlayManager = sdr::overlay::OverlayManagerBuffered::create(rOutputDevice);
+        }
+        else
+        {
+            // unbuffered OverlayManager, just invalidates places where changes
+            // take place
+            // Also hand over the old OverlayManager if existent; this means to take over
+            // the registered OverlayObjects from it
+            xOverlayManager = sdr::overlay::OverlayManager::create(rOutputDevice);
+        }
+
+        OSL_ENSURE(xOverlayManager.is(), "SdrPaintWindow::SdrPaintWindow: Could not allocate an overlayManager (!)");
+
+        // Request a repaint so that the buffered overlay manager fills
+        // its buffer properly.  This is a workaround for missing buffer
+        // updates.
+        if (!comphelper::LibreOfficeKit::isActive())
+        {
+            rWindow.Invalidate();
+        }
+
+        InitOverlayManager(xOverlayManager);
+    }
+    return xOverlayManager;
+}
+
+void SdrPaintWindow::impCreateOverlayManager()
+{
+    // not yet one created?
+    if(!mxOverlayManager.is())
+        mxOverlayManager = mrPaintView.CreateOverlayManager(GetOutputDevice());
+}
+
+SdrPaintWindow::SdrPaintWindow(SdrPaintView& rNewPaintView, OutputDevice& rOut, vcl::Window* pWindow)
+:   mpOutputDevice(&rOut),
+    mpWindow(pWindow),
+    mrPaintView(rNewPaintView),
+    mbTemporaryTarget(false), // #i72889#
+    mbOutputToWindow(OUTDEV_WINDOW == mpOutputDevice->GetOutDevType()),
+    mpPatched(nullptr)
+{
+}
+
+SdrPaintWindow::~SdrPaintWindow()
+{
+    mxOverlayManager.clear();
+
+    DestroyPreRenderDevice();
+}
+
+rtl::Reference< sdr::overlay::OverlayManager > const & SdrPaintWindow::GetOverlayManager() const
+{
+    if(!mxOverlayManager.is())
+    {
+        // Create buffered overlay manager by default.
+        const_cast< SdrPaintWindow* >(this)->impCreateOverlayManager();
+    }
+
+    return mxOverlayManager;
+}
+
+tools::Rectangle SdrPaintWindow::GetVisibleArea() const
+{
+    Size aVisSizePixel(GetOutputDevice().GetOutputSizePixel());
+    return GetOutputDevice().PixelToLogic(tools::Rectangle(Point(0,0), aVisSizePixel));
+}
+
+bool SdrPaintWindow::OutputToRecordingMetaFile() const
+{
+    GDIMetaFile* pMetaFile = mpOutputDevice->GetConnectMetaFile();
+    return (pMetaFile && pMetaFile->IsRecord() && !pMetaFile->IsPause());
+}
+
+void SdrPaintWindow::PreparePreRenderDevice()
+{
+    const bool bPrepareBufferedOutput(
+        mrPaintView.IsBufferedOutputAllowed()
+        && !OutputToPrinter()
+        && !mpOutputDevice->IsVirtual()
+        && !OutputToRecordingMetaFile());
+
+    if(bPrepareBufferedOutput)
+    {
+        if(!mpPreRenderDevice)
+        {
+            mpPreRenderDevice.reset(new SdrPreRenderDevice(*mpOutputDevice));
+        }
+    }
+    else
+    {
+        DestroyPreRenderDevice();
+    }
+
+    if(mpPreRenderDevice)
+    {
+        mpPreRenderDevice->PreparePreRenderDevice();
+    }
+}
+
+void SdrPaintWindow::DestroyPreRenderDevice()
+{
+    mpPreRenderDevice.reset();
+}
+
+void SdrPaintWindow::OutputPreRenderDevice(const vcl::Region& rExpandedRegion)
+{
+    if(mpPreRenderDevice)
+    {
+        mpPreRenderDevice->OutputPreRenderDevice(rExpandedRegion);
+    }
+}
+
+// #i73602# add flag if buffer shall be used
+void SdrPaintWindow::DrawOverlay(const vcl::Region& rRegion)
+{
+    // ## force creation of OverlayManager since the first repaint needs to
+    // save the background to get a controlled start into overlay mechanism
+    impCreateOverlayManager();
+
+    if(mxOverlayManager.is() && !OutputToPrinter())
+    {
+        if(mpPreRenderDevice)
+        {
+            mxOverlayManager->completeRedraw(rRegion, &mpPreRenderDevice->GetPreRenderDevice());
+        }
+        else
+        {
+            mxOverlayManager->completeRedraw(rRegion);
+        }
+    }
+}
+
+
+void SdrPaintWindow::SetRedrawRegion(const vcl::Region& rNew)
+{
+    maRedrawRegion = rNew;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/sdrundomanager.cxx b/svx/source/svdraw/sdrundomanager.cxx
new file mode 100644
index 000000000..78e72e761
--- /dev/null
+++ b/svx/source/svdraw/sdrundomanager.cxx
@@ -0,0 +1,149 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/sdrundomanager.hxx>
+#include <sfx2/objsh.hxx>
+#include <svl/hint.hxx>
+
+SdrUndoManager::SdrUndoManager()
+    : EditUndoManager(20/*nMaxUndoActionCount*/)
+    , maEndTextEditHdl()
+    , mpLastUndoActionBeforeTextEdit(nullptr)
+    , mbEndTextEditTriggeredFromUndo(false)
+    , m_pDocSh(nullptr)
+{
+}
+
+SdrUndoManager::~SdrUndoManager()
+{
+}
+
+bool SdrUndoManager::Undo()
+{
+    if(isTextEditActive())
+    {
+        bool bRetval(false);
+
+        // we are in text edit mode
+        if(GetUndoActionCount() && mpLastUndoActionBeforeTextEdit != GetUndoAction())
+        {
+            // there is an undo action for text edit, trigger it
+            bRetval = EditUndoManager::Undo();
+        }
+        else
+        {
+            // no more text edit undo, end text edit
+            mbEndTextEditTriggeredFromUndo = true;
+            maEndTextEditHdl.Call(this);
+            mbEndTextEditTriggeredFromUndo = false;
+        }
+
+        return bRetval;
+    }
+    else
+    {
+        // no undo triggered up to now, trigger local one
+        return SfxUndoManager::Undo();
+    }
+}
+
+bool SdrUndoManager::Redo()
+{
+    bool bRetval(false);
+
+    if(isTextEditActive())
+    {
+        // we are in text edit mode
+        bRetval = EditUndoManager::Redo();
+    }
+
+    if(!bRetval)
+    {
+        // no redo triggered up to now, trigger local one
+        bRetval = SfxUndoManager::Redo();
+    }
+
+    return bRetval;
+}
+
+void SdrUndoManager::Clear()
+{
+    if(isTextEditActive())
+    {
+        while(GetUndoActionCount() && mpLastUndoActionBeforeTextEdit != GetUndoAction())
+        {
+            RemoveLastUndoAction();
+        }
+
+        // urgently needed: RemoveLastUndoAction does NOT correct the Redo stack by itself (!)
+        ClearRedo();
+    }
+    else
+    {
+        // call parent
+        EditUndoManager::Clear();
+    }
+}
+
+void SdrUndoManager::SetEndTextEditHdl(const Link<SdrUndoManager*,void>& rLink)
+{
+    maEndTextEditHdl = rLink;
+
+    if(isTextEditActive())
+    {
+        // text edit start, remember last non-textedit action for later cleanup
+        mpLastUndoActionBeforeTextEdit = GetUndoActionCount() ? GetUndoAction() : nullptr;
+    }
+    else
+    {
+        // text edit ends, pop all textedit actions up to the remembered non-textedit action from the start
+        // to set back the UndoManager to the state before text edit started. If that action is already gone
+        // (due to being removed from the undo stack in the meantime), all need to be removed anyways
+        while(GetUndoActionCount() && mpLastUndoActionBeforeTextEdit != GetUndoAction())
+        {
+            RemoveLastUndoAction();
+        }
+
+        // urgently needed: RemoveLastUndoAction does NOT correct the Redo stack by itself (!)
+        ClearRedo();
+
+        // forget marker again
+        mpLastUndoActionBeforeTextEdit = nullptr;
+    }
+}
+
+bool SdrUndoManager::isTextEditActive() const
+{
+    return maEndTextEditHdl.IsSet();
+}
+
+void SdrUndoManager::SetDocShell(SfxObjectShell* pDocShell)
+{
+    m_pDocSh = pDocShell;
+}
+
+void SdrUndoManager::EmptyActionsChanged()
+{
+    if (m_pDocSh)
+    {
+        m_pDocSh->Broadcast(SfxHint(SfxHintId::DocumentRepair));
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/selectioncontroller.cxx b/svx/source/svdraw/selectioncontroller.cxx
new file mode 100644
index 000000000..28dda4ed2
--- /dev/null
+++ b/svx/source/svdraw/selectioncontroller.cxx
@@ -0,0 +1,120 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/selectioncontroller.hxx>
+
+namespace sdr
+{
+
+bool SelectionController::onKeyInput(const KeyEvent& /*rKEvt*/, vcl::Window* /*pWin*/)
+{
+    return false;
+}
+
+bool SelectionController::onMouseButtonDown(const MouseEvent& /*rMEvt*/, vcl::Window* /*pWin*/)
+{
+    return false;
+}
+
+bool SelectionController::onMouseButtonUp(const MouseEvent& /*rMEvt*/, vcl::Window* /*pWin*/)
+{
+    return false;
+}
+
+bool SelectionController::onMouseMove(const MouseEvent& /*rMEvt*/, vcl::Window* /*pWin*/)
+{
+    return false;
+}
+
+void SelectionController::onSelectionHasChanged()
+{
+}
+
+void SelectionController::GetState( SfxItemSet& /*rSet*/ )
+{
+}
+
+void SelectionController::Execute( SfxRequest& /*rReq*/ )
+{
+}
+
+bool SelectionController::DeleteMarked()
+{
+    return false;
+}
+
+bool SelectionController::GetAttributes(SfxItemSet& /*rTargetSet*/, bool /*bOnlyHardAttr*/) const
+{
+    return false;
+}
+
+bool SelectionController::SetAttributes(const SfxItemSet& /*rSet*/, bool /*bReplaceAll*/)
+{
+    return false;
+}
+
+bool SelectionController::GetStyleSheet( SfxStyleSheet* &/*rpStyleSheet*/ ) const
+{
+    return false;
+}
+
+bool SelectionController::SetStyleSheet( SfxStyleSheet* /*pStyleSheet*/, bool /*bDontRemoveHardAttr*/ )
+{
+    return false;
+}
+
+SdrObject* SelectionController::GetMarkedSdrObjClone( SdrModel& /*rTargetModel*/ )
+{
+    return nullptr;
+}
+
+bool SelectionController::PasteObjModel( const SdrModel& /*rModel*/ )
+{
+    return false;
+}
+
+bool SelectionController::ApplyFormatPaintBrush( SfxItemSet& /*rFormatSet*/, bool /*bNoCharacterFormats*/, bool /*bNoParagraphFormats*/ )
+{
+    return false;
+}
+
+bool SelectionController::hasSelectedCells() const
+{
+    return false;
+}
+
+void SelectionController::getSelectedCells(table::CellPos& /*rFirstPos*/, table::CellPos& /*rLastPos*/)
+{
+}
+
+bool SelectionController::setCursorLogicPosition(const Point& /*rPosition*/, bool /*bPoint*/)
+{
+    return false;
+}
+
+
+bool SelectionController::ChangeFontSize(bool /*bGrow*/, const FontList* /*pFontList*/)
+{
+    return false;
+}
+
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdattr.cxx b/svx/source/svdraw/svdattr.cxx
new file mode 100644
index 000000000..05992d9dc
--- /dev/null
+++ b/svx/source/svdraw/svdattr.cxx
@@ -0,0 +1,1982 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <com/sun/star/drawing/TextFitToSizeType.hpp>
+#include <com/sun/star/drawing/TextHorizontalAdjust.hpp>
+#include <com/sun/star/drawing/TextVerticalAdjust.hpp>
+#include <com/sun/star/drawing/TextAnimationKind.hpp>
+#include <com/sun/star/uno/Any.hxx>
+#include <com/sun/star/drawing/TextAnimationDirection.hpp>
+#include <com/sun/star/drawing/ConnectorType.hpp>
+#include <com/sun/star/drawing/MeasureKind.hpp>
+#include <com/sun/star/drawing/MeasureTextHorzPos.hpp>
+#include <com/sun/star/drawing/MeasureTextVertPos.hpp>
+#include <com/sun/star/drawing/CircleKind.hpp>
+
+#include <editeng/boxitem.hxx>
+#include <editeng/eeitem.hxx>
+#include <editeng/lineitem.hxx>
+#include <editeng/xmlcnitm.hxx>
+#include <editeng/adjustitem.hxx>
+#include <editeng/writingmodeitem.hxx>
+#include <editeng/charrotateitem.hxx>
+#include <osl/diagnose.h>
+#include <i18nutil/unicode.hxx>
+#include <tools/bigint.hxx>
+#include <unotools/intlwrapper.hxx>
+#include <unotools/localedatawrapper.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/settings.hxx>
+
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/sdgcpitm.hxx>
+#include <svx/sdtfchim.hxx>
+#include <svx/sdasitm.hxx>
+#include <sdgcoitm.hxx>
+#include <svx/sdggaitm.hxx>
+#include <sdginitm.hxx>
+#include <svx/sdgluitm.hxx>
+#include <svx/sdgmoitm.hxx>
+#include <sdgtritm.hxx>
+#include <svx/sdprcitm.hxx>
+#include <svx/sdtaaitm.hxx>
+#include <svx/sdtacitm.hxx>
+#include <svx/sdtaditm.hxx>
+#include <svx/sdtaiitm.hxx>
+#include <svx/sdtaitm.hxx>
+#include <svx/sdtakitm.hxx>
+#include <svx/sdtayitm.hxx>
+#include <svx/sdtfsitm.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdpool.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svx3ditems.hxx>
+#include <svx/svxids.hrc>
+#include <sxallitm.hxx>
+#include <sxcaitm.hxx>
+#include <svx/sxcecitm.hxx>
+#include <svx/sxcgitm.hxx>
+#include <sxcikitm.hxx>
+#include <svx/sxcllitm.hxx>
+#include <svx/sxctitm.hxx>
+#include <svx/sxekitm.hxx>
+#include <svx/sxelditm.hxx>
+#include <svx/sxenditm.hxx>
+#include <sxfiitm.hxx>
+#include <sxlayitm.hxx>
+#include <sxlogitm.hxx>
+#include <svx/sxmbritm.hxx>
+#include <sxmfsitm.hxx>
+#include <sxmkitm.hxx>
+#include <sxmoitm.hxx>
+#include <sxmovitm.hxx>
+#include <sxmsitm.hxx>
+#include <sxmtaitm.hxx>
+#include <svx/sxmtfitm.hxx>
+#include <svx/sxmtpitm.hxx>
+#include <svx/sxmtritm.hxx>
+#include <svx/sxmuitm.hxx>
+#include <sxoneitm.hxx>
+#include <sxopitm.hxx>
+#include <sxreaitm.hxx>
+#include <sxreoitm.hxx>
+#include <sxroaitm.hxx>
+#include <sxrooitm.hxx>
+#include <sxsaitm.hxx>
+#include <sxsalitm.hxx>
+#include <sxsiitm.hxx>
+#include <sxsoitm.hxx>
+#include <sxtraitm.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xlineit0.hxx>
+#include <libxml/xmlwriter.h>
+
+using namespace ::com::sun::star;
+
+SdrItemPool::SdrItemPool(
+    SfxItemPool* _pMaster)
+:   XOutdevItemPool(_pMaster)
+{
+    // prepare some constants
+    const Color aNullCol(COL_BLACK);
+    const sal_Int32 nDefEdgeDist(500); // Defaulting hard for Draw (100TH_MM) currently. MapMode will have to be taken into account in the future.
+
+    // init the non-persistent items
+    for(sal_uInt16 i(SDRATTR_NOTPERSIST_FIRST); i <= SDRATTR_NOTPERSIST_LAST; i++)
+    {
+        mpLocalItemInfos[i - SDRATTR_START]._bPoolable = false;
+    }
+
+    // init own PoolDefaults
+    std::vector<SfxPoolItem*>& rPoolDefaults = *mpLocalPoolDefaults;
+    rPoolDefaults[SDRATTR_SHADOW            -SDRATTR_START]=new SdrOnOffItem(SDRATTR_SHADOW, false);
+    rPoolDefaults[SDRATTR_SHADOWCOLOR       -SDRATTR_START]=new XColorItem(SDRATTR_SHADOWCOLOR, aNullCol);
+    rPoolDefaults[SDRATTR_SHADOWXDIST       -SDRATTR_START]=new SdrMetricItem(SDRATTR_SHADOWXDIST, 0);
+    rPoolDefaults[SDRATTR_SHADOWYDIST       -SDRATTR_START]=new SdrMetricItem(SDRATTR_SHADOWYDIST, 0);
+    rPoolDefaults[SDRATTR_SHADOWSIZEX       -SDRATTR_START]=new SdrMetricItem(SDRATTR_SHADOWSIZEX, 100000);
+    rPoolDefaults[SDRATTR_SHADOWSIZEY       -SDRATTR_START]=new SdrMetricItem(SDRATTR_SHADOWSIZEY, 100000);
+    rPoolDefaults[SDRATTR_SHADOWTRANSPARENCE-SDRATTR_START]=new SdrPercentItem(SDRATTR_SHADOWTRANSPARENCE, 0);
+    rPoolDefaults[SDRATTR_SHADOW3D          -SDRATTR_START]=new SfxVoidItem(SDRATTR_SHADOW3D    );
+    rPoolDefaults[SDRATTR_SHADOWPERSP       -SDRATTR_START]=new SfxVoidItem(SDRATTR_SHADOWPERSP );
+    rPoolDefaults[SDRATTR_CAPTIONTYPE      -SDRATTR_START]=new SdrCaptionTypeItem      ;
+    rPoolDefaults[SDRATTR_CAPTIONFIXEDANGLE-SDRATTR_START]=new SdrOnOffItem(SDRATTR_CAPTIONFIXEDANGLE, true);
+    rPoolDefaults[SDRATTR_CAPTIONANGLE     -SDRATTR_START]=new SdrCaptionAngleItem     ;
+    rPoolDefaults[SDRATTR_CAPTIONGAP       -SDRATTR_START]=new SdrCaptionGapItem       ;
+    rPoolDefaults[SDRATTR_CAPTIONESCDIR    -SDRATTR_START]=new SdrCaptionEscDirItem    ;
+    rPoolDefaults[SDRATTR_CAPTIONESCISREL  -SDRATTR_START]=new SdrCaptionEscIsRelItem  ;
+    rPoolDefaults[SDRATTR_CAPTIONESCREL    -SDRATTR_START]=new SdrCaptionEscRelItem    ;
+    rPoolDefaults[SDRATTR_CAPTIONESCABS    -SDRATTR_START]=new SdrCaptionEscAbsItem    ;
+    rPoolDefaults[SDRATTR_CAPTIONLINELEN   -SDRATTR_START]=new SdrCaptionLineLenItem   ;
+    rPoolDefaults[SDRATTR_CAPTIONFITLINELEN-SDRATTR_START]=new SdrCaptionFitLineLenItem;
+    rPoolDefaults[SDRATTR_ECKENRADIUS            -SDRATTR_START]=new SdrMetricItem(SDRATTR_ECKENRADIUS, 0);
+    rPoolDefaults[SDRATTR_TEXT_MINFRAMEHEIGHT    -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_MINFRAMEHEIGHT, 0);
+    rPoolDefaults[SDRATTR_TEXT_AUTOGROWHEIGHT    -SDRATTR_START]=new SdrOnOffItem(SDRATTR_TEXT_AUTOGROWHEIGHT, true);
+    rPoolDefaults[SDRATTR_TEXT_FITTOSIZE     -SDRATTR_START]=new SdrTextFitToSizeTypeItem;
+    rPoolDefaults[SDRATTR_TEXT_LEFTDIST      -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_LEFTDIST, 0);
+    rPoolDefaults[SDRATTR_TEXT_RIGHTDIST     -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_RIGHTDIST, 0);
+    rPoolDefaults[SDRATTR_TEXT_UPPERDIST     -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_UPPERDIST, 0);
+    rPoolDefaults[SDRATTR_TEXT_LOWERDIST     -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_LOWERDIST, 0);
+    rPoolDefaults[SDRATTR_TEXT_VERTADJUST        -SDRATTR_START]=new SdrTextVertAdjustItem;
+    rPoolDefaults[SDRATTR_TEXT_MAXFRAMEHEIGHT    -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_MAXFRAMEHEIGHT, 0);
+    rPoolDefaults[SDRATTR_TEXT_MINFRAMEWIDTH -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_MINFRAMEWIDTH, 0);
+    rPoolDefaults[SDRATTR_TEXT_MAXFRAMEWIDTH -SDRATTR_START]=new SdrMetricItem(SDRATTR_TEXT_MAXFRAMEWIDTH, 0);
+    rPoolDefaults[SDRATTR_TEXT_AUTOGROWWIDTH -SDRATTR_START]=new SdrOnOffItem(SDRATTR_TEXT_AUTOGROWWIDTH, false);
+    rPoolDefaults[SDRATTR_TEXT_HORZADJUST        -SDRATTR_START]=new SdrTextHorzAdjustItem;
+    rPoolDefaults[SDRATTR_TEXT_ANIKIND           -SDRATTR_START]=new SdrTextAniKindItem;
+    rPoolDefaults[SDRATTR_TEXT_ANIDIRECTION  -SDRATTR_START]=new SdrTextAniDirectionItem;
+    rPoolDefaults[SDRATTR_TEXT_ANISTARTINSIDE    -SDRATTR_START]=new SdrTextAniStartInsideItem;
+    rPoolDefaults[SDRATTR_TEXT_ANISTOPINSIDE -SDRATTR_START]=new SdrTextAniStopInsideItem;
+    rPoolDefaults[SDRATTR_TEXT_ANICOUNT      -SDRATTR_START]=new SdrTextAniCountItem;
+    rPoolDefaults[SDRATTR_TEXT_ANIDELAY      -SDRATTR_START]=new SdrTextAniDelayItem;
+    rPoolDefaults[SDRATTR_TEXT_ANIAMOUNT     -SDRATTR_START]=new SdrTextAniAmountItem;
+    rPoolDefaults[SDRATTR_TEXT_CONTOURFRAME  -SDRATTR_START]=new SdrOnOffItem(SDRATTR_TEXT_CONTOURFRAME, false);
+    rPoolDefaults[SDRATTR_XMLATTRIBUTES -SDRATTR_START]=new SvXMLAttrContainerItem( SDRATTR_XMLATTRIBUTES );
+    rPoolDefaults[SDRATTR_TEXT_CHAINNEXTNAME    -SDRATTR_START]=new SfxStringItem(SDRATTR_TEXT_CHAINNEXTNAME, "");
+    rPoolDefaults[SDRATTR_TEXT_USEFIXEDCELLHEIGHT -SDRATTR_START]=new SdrTextFixedCellHeightItem;
+    rPoolDefaults[SDRATTR_TEXT_WORDWRAP         -SDRATTR_START]=new SdrOnOffItem(SDRATTR_TEXT_WORDWRAP, true);
+    rPoolDefaults[SDRATTR_EDGEKIND         -SDRATTR_START]=new SdrEdgeKindItem;
+    rPoolDefaults[SDRATTR_EDGENODE1HORZDIST-SDRATTR_START]=new SdrEdgeNode1HorzDistItem(nDefEdgeDist);
+    rPoolDefaults[SDRATTR_EDGENODE1VERTDIST-SDRATTR_START]=new SdrEdgeNode1VertDistItem(nDefEdgeDist);
+    rPoolDefaults[SDRATTR_EDGENODE2HORZDIST-SDRATTR_START]=new SdrEdgeNode2HorzDistItem(nDefEdgeDist);
+    rPoolDefaults[SDRATTR_EDGENODE2VERTDIST-SDRATTR_START]=new SdrEdgeNode2VertDistItem(nDefEdgeDist);
+    rPoolDefaults[SDRATTR_EDGENODE1GLUEDIST-SDRATTR_START]=new SdrEdgeNode1GlueDistItem;
+    rPoolDefaults[SDRATTR_EDGENODE2GLUEDIST-SDRATTR_START]=new SdrEdgeNode2GlueDistItem;
+    rPoolDefaults[SDRATTR_EDGELINEDELTACOUNT-SDRATTR_START]=new SdrEdgeLineDeltaCountItem;
+    rPoolDefaults[SDRATTR_EDGELINE1DELTA   -SDRATTR_START]=new SdrMetricItem(SDRATTR_EDGELINE1DELTA, 0);
+    rPoolDefaults[SDRATTR_EDGELINE2DELTA   -SDRATTR_START]=new SdrMetricItem(SDRATTR_EDGELINE2DELTA, 0);
+    rPoolDefaults[SDRATTR_EDGELINE3DELTA   -SDRATTR_START]=new SdrMetricItem(SDRATTR_EDGELINE3DELTA, 0);
+    rPoolDefaults[SDRATTR_MEASUREKIND             -SDRATTR_START]=new SdrMeasureKindItem;
+    rPoolDefaults[SDRATTR_MEASURETEXTHPOS         -SDRATTR_START]=new SdrMeasureTextHPosItem;
+    rPoolDefaults[SDRATTR_MEASURETEXTVPOS         -SDRATTR_START]=new SdrMeasureTextVPosItem;
+    rPoolDefaults[SDRATTR_MEASURELINEDIST         -SDRATTR_START]=new SdrMetricItem(SDRATTR_MEASURELINEDIST, 800);
+    rPoolDefaults[SDRATTR_MEASUREHELPLINEOVERHANG -SDRATTR_START]=new SdrMetricItem(SDRATTR_MEASUREHELPLINEOVERHANG, 200);
+    rPoolDefaults[SDRATTR_MEASUREHELPLINEDIST     -SDRATTR_START]=new SdrMetricItem(SDRATTR_MEASUREHELPLINEDIST, 100);
+    rPoolDefaults[SDRATTR_MEASUREHELPLINE1LEN     -SDRATTR_START]=new SdrMetricItem(SDRATTR_MEASUREHELPLINE1LEN, 0);
+    rPoolDefaults[SDRATTR_MEASUREHELPLINE2LEN     -SDRATTR_START]=new SdrMetricItem(SDRATTR_MEASUREHELPLINE2LEN, 0);
+    rPoolDefaults[SDRATTR_MEASUREBELOWREFEDGE     -SDRATTR_START]=new SdrMeasureBelowRefEdgeItem;
+    rPoolDefaults[SDRATTR_MEASURETEXTROTA90       -SDRATTR_START]=new SdrMeasureTextRota90Item;
+    rPoolDefaults[SDRATTR_MEASURETEXTUPSIDEDOWN   -SDRATTR_START]=new SdrMeasureTextUpsideDownItem;
+    rPoolDefaults[SDRATTR_MEASUREOVERHANG         -SDRATTR_START]=new SdrMeasureOverhangItem(600);
+    rPoolDefaults[SDRATTR_MEASUREUNIT             -SDRATTR_START]=new SdrMeasureUnitItem;
+    rPoolDefaults[SDRATTR_MEASURESCALE            -SDRATTR_START]=new SdrMeasureScaleItem;
+    rPoolDefaults[SDRATTR_MEASURESHOWUNIT         -SDRATTR_START]=new SdrYesNoItem(SDRATTR_MEASURESHOWUNIT, false);
+    rPoolDefaults[SDRATTR_MEASUREFORMATSTRING     -SDRATTR_START]=new SdrMeasureFormatStringItem();
+    rPoolDefaults[SDRATTR_MEASURETEXTAUTOANGLE    -SDRATTR_START]=new SdrMeasureTextAutoAngleItem();
+    rPoolDefaults[SDRATTR_MEASURETEXTAUTOANGLEVIEW-SDRATTR_START]=new SdrMeasureTextAutoAngleViewItem();
+    rPoolDefaults[SDRATTR_MEASURETEXTISFIXEDANGLE -SDRATTR_START]=new SdrMeasureTextIsFixedAngleItem();
+    rPoolDefaults[SDRATTR_MEASURETEXTFIXEDANGLE   -SDRATTR_START]=new SdrMeasureTextFixedAngleItem();
+    rPoolDefaults[SDRATTR_MEASUREDECIMALPLACES    -SDRATTR_START]=new SdrMeasureDecimalPlacesItem();
+    rPoolDefaults[SDRATTR_CIRCKIND      -SDRATTR_START]=new SdrCircKindItem;
+    rPoolDefaults[SDRATTR_CIRCSTARTANGLE-SDRATTR_START]=new SdrAngleItem(SDRATTR_CIRCSTARTANGLE, 0);
+    rPoolDefaults[SDRATTR_CIRCENDANGLE  -SDRATTR_START]=new SdrAngleItem(SDRATTR_CIRCENDANGLE, 36000);
+    rPoolDefaults[SDRATTR_OBJMOVEPROTECT -SDRATTR_START]=new SdrYesNoItem(SDRATTR_OBJMOVEPROTECT, false);
+    rPoolDefaults[SDRATTR_OBJSIZEPROTECT -SDRATTR_START]=new SdrYesNoItem(SDRATTR_OBJSIZEPROTECT, false);
+    rPoolDefaults[SDRATTR_OBJPRINTABLE   -SDRATTR_START]=new SdrObjPrintableItem;
+    rPoolDefaults[SDRATTR_OBJVISIBLE     -SDRATTR_START]=new SdrObjVisibleItem;
+    rPoolDefaults[SDRATTR_LAYERID        -SDRATTR_START]=new SdrLayerIdItem(SdrLayerID(0));
+    rPoolDefaults[SDRATTR_LAYERNAME      -SDRATTR_START]=new SdrLayerNameItem;
+    rPoolDefaults[SDRATTR_OBJECTNAME     -SDRATTR_START]=new SfxStringItem(SDRATTR_OBJECTNAME);
+    rPoolDefaults[SDRATTR_ALLPOSITIONX   -SDRATTR_START]=new SdrAllPositionXItem;
+    rPoolDefaults[SDRATTR_ALLPOSITIONY   -SDRATTR_START]=new SdrAllPositionYItem;
+    rPoolDefaults[SDRATTR_ALLSIZEWIDTH   -SDRATTR_START]=new SdrAllSizeWidthItem;
+    rPoolDefaults[SDRATTR_ALLSIZEHEIGHT  -SDRATTR_START]=new SdrAllSizeHeightItem;
+    rPoolDefaults[SDRATTR_ONEPOSITIONX   -SDRATTR_START]=new SdrOnePositionXItem;
+    rPoolDefaults[SDRATTR_ONEPOSITIONY   -SDRATTR_START]=new SdrOnePositionYItem;
+    rPoolDefaults[SDRATTR_ONESIZEWIDTH   -SDRATTR_START]=new SdrOneSizeWidthItem;
+    rPoolDefaults[SDRATTR_ONESIZEHEIGHT  -SDRATTR_START]=new SdrOneSizeHeightItem;
+    rPoolDefaults[SDRATTR_LOGICSIZEWIDTH -SDRATTR_START]=new SdrLogicSizeWidthItem;
+    rPoolDefaults[SDRATTR_LOGICSIZEHEIGHT-SDRATTR_START]=new SdrLogicSizeHeightItem;
+    rPoolDefaults[SDRATTR_ROTATEANGLE    -SDRATTR_START]=new SdrAngleItem(SDRATTR_ROTATEANGLE, 0);
+    rPoolDefaults[SDRATTR_SHEARANGLE     -SDRATTR_START]=new SdrShearAngleItem;
+    rPoolDefaults[SDRATTR_MOVEX          -SDRATTR_START]=new SdrMoveXItem;
+    rPoolDefaults[SDRATTR_MOVEY          -SDRATTR_START]=new SdrMoveYItem;
+    rPoolDefaults[SDRATTR_RESIZEXONE     -SDRATTR_START]=new SdrResizeXOneItem;
+    rPoolDefaults[SDRATTR_RESIZEYONE     -SDRATTR_START]=new SdrResizeYOneItem;
+    rPoolDefaults[SDRATTR_ROTATEONE      -SDRATTR_START]=new SdrRotateOneItem;
+    rPoolDefaults[SDRATTR_HORZSHEARONE   -SDRATTR_START]=new SdrHorzShearOneItem;
+    rPoolDefaults[SDRATTR_VERTSHEARONE   -SDRATTR_START]=new SdrVertShearOneItem;
+    rPoolDefaults[SDRATTR_RESIZEXALL     -SDRATTR_START]=new SdrResizeXAllItem;
+    rPoolDefaults[SDRATTR_RESIZEYALL     -SDRATTR_START]=new SdrResizeYAllItem;
+    rPoolDefaults[SDRATTR_ROTATEALL      -SDRATTR_START]=new SdrRotateAllItem;
+    rPoolDefaults[SDRATTR_HORZSHEARALL   -SDRATTR_START]=new SdrHorzShearAllItem;
+    rPoolDefaults[SDRATTR_VERTSHEARALL   -SDRATTR_START]=new SdrVertShearAllItem;
+    rPoolDefaults[SDRATTR_TRANSFORMREF1X -SDRATTR_START]=new SdrTransformRef1XItem;
+    rPoolDefaults[SDRATTR_TRANSFORMREF1Y -SDRATTR_START]=new SdrTransformRef1YItem;
+    rPoolDefaults[SDRATTR_TRANSFORMREF2X -SDRATTR_START]=new SdrTransformRef2XItem;
+    rPoolDefaults[SDRATTR_TRANSFORMREF2Y -SDRATTR_START]=new SdrTransformRef2YItem;
+    rPoolDefaults[SDRATTR_TEXTDIRECTION  -SDRATTR_START]=new SvxWritingModeItem(css::text::WritingMode_LR_TB, SDRATTR_TEXTDIRECTION);
+    rPoolDefaults[ SDRATTR_GRAFRED               - SDRATTR_START] = new SdrGrafRedItem;
+    rPoolDefaults[ SDRATTR_GRAFGREEN         - SDRATTR_START] = new SdrGrafGreenItem;
+    rPoolDefaults[ SDRATTR_GRAFBLUE          - SDRATTR_START] = new SdrGrafBlueItem;
+    rPoolDefaults[ SDRATTR_GRAFLUMINANCE     - SDRATTR_START] = new SdrGrafLuminanceItem;
+    rPoolDefaults[ SDRATTR_GRAFCONTRAST      - SDRATTR_START] = new SdrGrafContrastItem;
+    rPoolDefaults[ SDRATTR_GRAFGAMMA         - SDRATTR_START] = new SdrGrafGamma100Item;
+    rPoolDefaults[ SDRATTR_GRAFTRANSPARENCE  - SDRATTR_START] = new SdrGrafTransparenceItem;
+    rPoolDefaults[ SDRATTR_GRAFINVERT            - SDRATTR_START] = new SdrGrafInvertItem;
+    rPoolDefaults[ SDRATTR_GRAFMODE          - SDRATTR_START] = new SdrGrafModeItem;
+    rPoolDefaults[ SDRATTR_GRAFCROP          - SDRATTR_START] = new SdrGrafCropItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_PERCENT_DIAGONAL - SDRATTR_START ] = new SfxUInt16Item(SDRATTR_3DOBJ_PERCENT_DIAGONAL, 10);
+    rPoolDefaults[ SDRATTR_3DOBJ_BACKSCALE - SDRATTR_START ] = new SfxUInt16Item(SDRATTR_3DOBJ_BACKSCALE, 100);
+    rPoolDefaults[ SDRATTR_3DOBJ_DEPTH - SDRATTR_START ] = new SfxUInt32Item(SDRATTR_3DOBJ_DEPTH, 1000);
+    rPoolDefaults[ SDRATTR_3DOBJ_HORZ_SEGS - SDRATTR_START ] = new SfxUInt32Item(SDRATTR_3DOBJ_HORZ_SEGS, 24);
+    rPoolDefaults[ SDRATTR_3DOBJ_VERT_SEGS - SDRATTR_START ] = new SfxUInt32Item(SDRATTR_3DOBJ_VERT_SEGS, 24);
+    rPoolDefaults[ SDRATTR_3DOBJ_END_ANGLE - SDRATTR_START ] = new SfxUInt32Item(SDRATTR_3DOBJ_END_ANGLE, 3600);
+    rPoolDefaults[ SDRATTR_3DOBJ_DOUBLE_SIDED - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DOBJ_DOUBLE_SIDED, false);
+    rPoolDefaults[ SDRATTR_3DOBJ_NORMALS_KIND - SDRATTR_START ] = new Svx3DNormalsKindItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_NORMALS_INVERT - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DOBJ_NORMALS_INVERT, false);
+    rPoolDefaults[ SDRATTR_3DOBJ_TEXTURE_PROJ_X - SDRATTR_START ] = new Svx3DTextureProjectionXItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_TEXTURE_PROJ_Y - SDRATTR_START ] = new Svx3DTextureProjectionYItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_SHADOW_3D - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DOBJ_SHADOW_3D, false);
+    rPoolDefaults[ SDRATTR_3DOBJ_MAT_COLOR - SDRATTR_START ] = new SvxColorItem(Color(0x0000b8ff), SDRATTR_3DOBJ_MAT_COLOR);
+    rPoolDefaults[ SDRATTR_3DOBJ_MAT_EMISSION - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DOBJ_MAT_EMISSION);
+    rPoolDefaults[ SDRATTR_3DOBJ_MAT_SPECULAR - SDRATTR_START ] = new SvxColorItem(Color(0x00ffffff), SDRATTR_3DOBJ_MAT_SPECULAR);
+    rPoolDefaults[ SDRATTR_3DOBJ_MAT_SPECULAR_INTENSITY - SDRATTR_START ] = new SfxUInt16Item(SDRATTR_3DOBJ_MAT_SPECULAR_INTENSITY, 15);
+    rPoolDefaults[ SDRATTR_3DOBJ_TEXTURE_KIND - SDRATTR_START ] = new Svx3DTextureKindItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_TEXTURE_MODE - SDRATTR_START ] = new Svx3DTextureModeItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_TEXTURE_FILTER - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DOBJ_TEXTURE_FILTER, false);
+    rPoolDefaults[ SDRATTR_3DOBJ_SMOOTH_NORMALS - SDRATTR_START ] = new Svx3DSmoothNormalsItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_SMOOTH_LIDS - SDRATTR_START ] = new Svx3DSmoothLidsItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_CHARACTER_MODE - SDRATTR_START ] = new Svx3DCharacterModeItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_CLOSE_FRONT - SDRATTR_START ] = new Svx3DCloseFrontItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_CLOSE_BACK - SDRATTR_START ] = new Svx3DCloseBackItem;
+    rPoolDefaults[ SDRATTR_3DOBJ_REDUCED_LINE_GEOMETRY - SDRATTR_START ] = new Svx3DReducedLineGeometryItem;
+    rPoolDefaults[ SDRATTR_3DSCENE_PERSPECTIVE - SDRATTR_START ] = new Svx3DPerspectiveItem;
+    rPoolDefaults[ SDRATTR_3DSCENE_DISTANCE - SDRATTR_START ] = new SfxUInt32Item(SDRATTR_3DSCENE_DISTANCE, 100);
+    rPoolDefaults[ SDRATTR_3DSCENE_FOCAL_LENGTH - SDRATTR_START ] = new SfxUInt32Item(SDRATTR_3DSCENE_FOCAL_LENGTH, 100);
+    rPoolDefaults[ SDRATTR_3DSCENE_TWO_SIDED_LIGHTING - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_TWO_SIDED_LIGHTING, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_1 - SDRATTR_START ] = new SvxColorItem(Color(0xffcccccc), SDRATTR_3DSCENE_LIGHTCOLOR_1);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_2 - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DSCENE_LIGHTCOLOR_2);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_3 - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DSCENE_LIGHTCOLOR_3);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_4 - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DSCENE_LIGHTCOLOR_4);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_5 - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DSCENE_LIGHTCOLOR_5);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_6 - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DSCENE_LIGHTCOLOR_6);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_7 - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DSCENE_LIGHTCOLOR_7);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTCOLOR_8 - SDRATTR_START ] = new SvxColorItem(Color(0x00000000), SDRATTR_3DSCENE_LIGHTCOLOR_8);
+    rPoolDefaults[ SDRATTR_3DSCENE_AMBIENTCOLOR - SDRATTR_START ] = new SvxColorItem(Color(0x00666666), SDRATTR_3DSCENE_AMBIENTCOLOR);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_1 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_1, true);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_2 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_2, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_3 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_3, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_4 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_4, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_5 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_5, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_6 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_6, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_7 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_7, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTON_8 - SDRATTR_START ] = new SfxBoolItem(SDRATTR_3DSCENE_LIGHTON_8, false);
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_1 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_1, basegfx::B3DVector(0.57735026918963, 0.57735026918963, 0.57735026918963));
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_2 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_2, basegfx::B3DVector(0.0,0.0,1.0));
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_3 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_3, basegfx::B3DVector(0.0,0.0,1.0));
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_4 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_4, basegfx::B3DVector(0.0,0.0,1.0));
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_5 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_5, basegfx::B3DVector(0.0,0.0,1.0));
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_6 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_6, basegfx::B3DVector(0.0,0.0,1.0));
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_7 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_7, basegfx::B3DVector(0.0,0.0,1.0));
+    rPoolDefaults[ SDRATTR_3DSCENE_LIGHTDIRECTION_8 - SDRATTR_START ] = new SvxB3DVectorItem(SDRATTR_3DSCENE_LIGHTDIRECTION_8, basegfx::B3DVector(0.0,0.0,1.0));
+    rPoolDefaults[ SDRATTR_3DSCENE_SHADOW_SLANT - SDRATTR_START ] = new SfxUInt16Item(SDRATTR_3DSCENE_SHADOW_SLANT, 0);
+    rPoolDefaults[ SDRATTR_3DSCENE_SHADE_MODE - SDRATTR_START ] = new Svx3DShadeModeItem;
+    rPoolDefaults[ SDRATTR_CUSTOMSHAPE_ENGINE - SDRATTR_START ] = new SfxStringItem(SDRATTR_CUSTOMSHAPE_ENGINE, "");
+    rPoolDefaults[ SDRATTR_CUSTOMSHAPE_DATA - SDRATTR_START ] = new SfxStringItem(SDRATTR_CUSTOMSHAPE_DATA, "");
+    rPoolDefaults[ SDRATTR_CUSTOMSHAPE_GEOMETRY - SDRATTR_START ] = new SdrCustomShapeGeometryItem;
+
+    SvxBoxItem* pboxItem = new SvxBoxItem( SDRATTR_TABLE_BORDER );
+    pboxItem->SetAllDistances( 100 );
+    rPoolDefaults[ SDRATTR_TABLE_BORDER - SDRATTR_START ] = pboxItem;
+
+    SvxBoxInfoItem* pBoxInfoItem = new SvxBoxInfoItem( SDRATTR_TABLE_BORDER_INNER );
+
+    pBoxInfoItem->SetTable( true );
+    pBoxInfoItem->SetDist( true);        // always show margin field
+    pBoxInfoItem->SetValid( SvxBoxInfoItemValidFlags::DISABLE ); // some lines may have DontCare state only in tables
+
+    rPoolDefaults[ SDRATTR_TABLE_BORDER_INNER - SDRATTR_START ] =  pBoxInfoItem;
+    rPoolDefaults[ SDRATTR_TABLE_BORDER_TLBR - SDRATTR_START ] = new SvxLineItem( SDRATTR_TABLE_BORDER_TLBR );
+    rPoolDefaults[ SDRATTR_TABLE_BORDER_BLTR - SDRATTR_START ] = new SvxLineItem( SDRATTR_TABLE_BORDER_BLTR );
+    rPoolDefaults[ SDRATTR_TABLE_TEXT_ROTATION - SDRATTR_START ] = new SvxTextRotateItem(0, SDRATTR_TABLE_TEXT_ROTATION);
+
+    rPoolDefaults[ SDRATTR_GLOW_RADIUS - SDRATTR_START ] = new SdrMetricItem(SDRATTR_GLOW_RADIUS, 0);
+    rPoolDefaults[ SDRATTR_GLOW_COLOR - SDRATTR_START ] = new XColorItem(SDRATTR_GLOW_COLOR, aNullCol);
+    rPoolDefaults[ SDRATTR_GLOW_TRANSPARENCY - SDRATTR_START ] = new SdrPercentItem(SDRATTR_GLOW_TRANSPARENCY, 0);
+
+    rPoolDefaults[SDRATTR_SOFTEDGE_RADIUS - SDRATTR_START] = new SdrMetricItem(SDRATTR_SOFTEDGE_RADIUS, 0);
+
+    // set own ItemInfos
+    mpLocalItemInfos[SDRATTR_SHADOW-SDRATTR_START]._nSID=SID_ATTR_FILL_SHADOW;
+    mpLocalItemInfos[SDRATTR_SHADOWCOLOR-SDRATTR_START]._nSID=SID_ATTR_SHADOW_COLOR;
+    mpLocalItemInfos[SDRATTR_SHADOWTRANSPARENCE-SDRATTR_START]._nSID=SID_ATTR_SHADOW_TRANSPARENCE;
+    mpLocalItemInfos[SDRATTR_SHADOWXDIST-SDRATTR_START]._nSID=SID_ATTR_SHADOW_XDISTANCE;
+    mpLocalItemInfos[SDRATTR_SHADOWYDIST-SDRATTR_START]._nSID=SID_ATTR_SHADOW_YDISTANCE;
+    mpLocalItemInfos[SDRATTR_TEXT_FITTOSIZE-SDRATTR_START]._nSID=SID_ATTR_TEXT_FITTOSIZE;
+    mpLocalItemInfos[SDRATTR_GRAFCROP-SDRATTR_START]._nSID=SID_ATTR_GRAF_CROP;
+
+    mpLocalItemInfos[SDRATTR_TABLE_BORDER - SDRATTR_START ]._nSID = SID_ATTR_BORDER_OUTER;
+    mpLocalItemInfos[SDRATTR_TABLE_BORDER_INNER - SDRATTR_START ]._nSID = SID_ATTR_BORDER_INNER;
+    mpLocalItemInfos[SDRATTR_TABLE_BORDER_TLBR - SDRATTR_START ]._nSID = SID_ATTR_BORDER_DIAG_TLBR;
+    mpLocalItemInfos[SDRATTR_TABLE_BORDER_BLTR - SDRATTR_START ]._nSID = SID_ATTR_BORDER_DIAG_BLTR;
+
+    mpLocalItemInfos[SDRATTR_GLOW_RADIUS - SDRATTR_START]._nSID = SID_ATTR_GLOW_RADIUS;
+    mpLocalItemInfos[SDRATTR_GLOW_COLOR - SDRATTR_START]._nSID = SID_ATTR_GLOW_COLOR;
+    mpLocalItemInfos[SDRATTR_GLOW_TRANSPARENCY - SDRATTR_START]._nSID = SID_ATTR_GLOW_TRANSPARENCY;
+
+    mpLocalItemInfos[SDRATTR_SOFTEDGE_RADIUS - SDRATTR_START]._nSID = SID_ATTR_SOFTEDGE_RADIUS;
+
+    // it's my own creation level, set Defaults and ItemInfos
+    SetDefaults(mpLocalPoolDefaults);
+    SetItemInfos(mpLocalItemInfos.get());
+}
+
+// copy ctor, so that static defaults are cloned
+//            (Parameter 2 = sal_True)
+SdrItemPool::SdrItemPool(const SdrItemPool& rPool)
+:   XOutdevItemPool(rPool)
+{
+}
+
+SdrItemPool* SdrItemPool::Clone() const
+{
+    return new SdrItemPool(*this);
+}
+
+SdrItemPool::~SdrItemPool()
+{
+    // split pools before destroying
+    SetSecondaryPool(nullptr);
+}
+
+bool SdrItemPool::GetPresentation(
+              const SfxPoolItem& rItem,
+              MapUnit ePresentationMetric, OUString& rText,
+              const IntlWrapper& rIntlWrapper) const
+{
+    if (!IsInvalidItem(&rItem)) {
+        sal_uInt16 nWhich=rItem.Which();
+        if (nWhich>=SDRATTR_SHADOW_FIRST && nWhich<=SDRATTR_END) {
+            rItem.GetPresentation(SfxItemPresentation::Nameless,
+                        GetMetric(nWhich),ePresentationMetric,rText,
+                        rIntlWrapper);
+            rText = GetItemName(nWhich) + " " + rText;
+
+            return true;
+        }
+    }
+    return XOutdevItemPool::GetPresentation(rItem,ePresentationMetric,rText,rIntlWrapper);
+}
+
+OUString SdrItemPool::GetItemName(sal_uInt16 nWhich)
+{
+    const char* pResId = SIP_UNKNOWN_ATTR;
+
+    switch (nWhich)
+    {
+        case XATTR_LINESTYLE        : pResId = SIP_XA_LINESTYLE;break;
+        case XATTR_LINEDASH         : pResId = SIP_XA_LINEDASH;break;
+        case XATTR_LINEWIDTH        : pResId = SIP_XA_LINEWIDTH;break;
+        case XATTR_LINECOLOR        : pResId = SIP_XA_LINECOLOR;break;
+        case XATTR_LINESTART        : pResId = SIP_XA_LINESTART;break;
+        case XATTR_LINEEND          : pResId = SIP_XA_LINEEND;break;
+        case XATTR_LINESTARTWIDTH   : pResId = SIP_XA_LINESTARTWIDTH;break;
+        case XATTR_LINEENDWIDTH     : pResId = SIP_XA_LINEENDWIDTH;break;
+        case XATTR_LINESTARTCENTER  : pResId = SIP_XA_LINESTARTCENTER;break;
+        case XATTR_LINEENDCENTER    : pResId = SIP_XA_LINEENDCENTER;break;
+        case XATTR_LINETRANSPARENCE : pResId = SIP_XA_LINETRANSPARENCE;break;
+        case XATTR_LINEJOINT        : pResId = SIP_XA_LINEJOINT;break;
+        case XATTRSET_LINE          : pResId = SIP_XATTRSET_LINE;break;
+
+        case XATTR_FILLSTYLE            : pResId = SIP_XA_FILLSTYLE;break;
+        case XATTR_FILLCOLOR            : pResId = SIP_XA_FILLCOLOR;break;
+        case XATTR_FILLGRADIENT         : pResId = SIP_XA_FILLGRADIENT;break;
+        case XATTR_FILLHATCH            : pResId = SIP_XA_FILLHATCH;break;
+        case XATTR_FILLBITMAP           : pResId = SIP_XA_FILLBITMAP;break;
+        case XATTR_FILLTRANSPARENCE     : pResId = SIP_XA_FILLTRANSPARENCE;break;
+        case XATTR_GRADIENTSTEPCOUNT    : pResId = SIP_XA_GRADIENTSTEPCOUNT;break;
+        case XATTR_FILLBMP_TILE         : pResId = SIP_XA_FILLBMP_TILE;break;
+        case XATTR_FILLBMP_POS          : pResId = SIP_XA_FILLBMP_POS;break;
+        case XATTR_FILLBMP_SIZEX        : pResId = SIP_XA_FILLBMP_SIZEX;break;
+        case XATTR_FILLBMP_SIZEY        : pResId = SIP_XA_FILLBMP_SIZEY;break;
+        case XATTR_FILLFLOATTRANSPARENCE: pResId = SIP_XA_FILLFLOATTRANSPARENCE;break;
+        case XATTR_SECONDARYFILLCOLOR   : pResId = SIP_XA_SECONDARYFILLCOLOR;break;
+        case XATTR_FILLBMP_SIZELOG      : pResId = SIP_XA_FILLBMP_SIZELOG;break;
+        case XATTR_FILLBMP_TILEOFFSETX  : pResId = SIP_XA_FILLBMP_TILEOFFSETX;break;
+        case XATTR_FILLBMP_TILEOFFSETY  : pResId = SIP_XA_FILLBMP_TILEOFFSETY;break;
+        case XATTR_FILLBMP_STRETCH      : pResId = SIP_XA_FILLBMP_STRETCH;break;
+        case XATTR_FILLBMP_POSOFFSETX   : pResId = SIP_XA_FILLBMP_POSOFFSETX;break;
+        case XATTR_FILLBMP_POSOFFSETY   : pResId = SIP_XA_FILLBMP_POSOFFSETY;break;
+        case XATTR_FILLBACKGROUND       : pResId = SIP_XA_FILLBACKGROUND;break;
+
+        case XATTRSET_FILL             : pResId = SIP_XATTRSET_FILL;break;
+
+        case XATTR_FORMTXTSTYLE     : pResId = SIP_XA_FORMTXTSTYLE;break;
+        case XATTR_FORMTXTADJUST    : pResId = SIP_XA_FORMTXTADJUST;break;
+        case XATTR_FORMTXTDISTANCE  : pResId = SIP_XA_FORMTXTDISTANCE;break;
+        case XATTR_FORMTXTSTART     : pResId = SIP_XA_FORMTXTSTART;break;
+        case XATTR_FORMTXTMIRROR    : pResId = SIP_XA_FORMTXTMIRROR;break;
+        case XATTR_FORMTXTOUTLINE   : pResId = SIP_XA_FORMTXTOUTLINE;break;
+        case XATTR_FORMTXTSHADOW    : pResId = SIP_XA_FORMTXTSHADOW;break;
+        case XATTR_FORMTXTSHDWCOLOR : pResId = SIP_XA_FORMTXTSHDWCOLOR;break;
+        case XATTR_FORMTXTSHDWXVAL  : pResId = SIP_XA_FORMTXTSHDWXVAL;break;
+        case XATTR_FORMTXTSHDWYVAL  : pResId = SIP_XA_FORMTXTSHDWYVAL;break;
+        case XATTR_FORMTXTHIDEFORM  : pResId = SIP_XA_FORMTXTHIDEFORM;break;
+        case XATTR_FORMTXTSHDWTRANSP: pResId = SIP_XA_FORMTXTSHDWTRANSP;break;
+
+        case SDRATTR_SHADOW            : pResId = SIP_SA_SHADOW;break;
+        case SDRATTR_SHADOWCOLOR       : pResId = SIP_SA_SHADOWCOLOR;break;
+        case SDRATTR_SHADOWXDIST       : pResId = SIP_SA_SHADOWXDIST;break;
+        case SDRATTR_SHADOWYDIST       : pResId = SIP_SA_SHADOWYDIST;break;
+        case SDRATTR_SHADOWTRANSPARENCE: pResId = SIP_SA_SHADOWTRANSPARENCE;break;
+        case SDRATTR_SHADOW3D          : pResId = SIP_SA_SHADOW3D;break;
+        case SDRATTR_SHADOWPERSP       : pResId = SIP_SA_SHADOWPERSP;break;
+
+        case SDRATTR_GLOW_RADIUS       : pResId = SIP_SA_GLOW_RADIUS;break;
+        case SDRATTR_GLOW_COLOR        : pResId = SIP_SA_GLOW_COLOR;break;
+        case SDRATTR_GLOW_TRANSPARENCY : pResId = SIP_SA_GLOW_TRANSPARENCY;break;
+
+        case SDRATTR_SOFTEDGE_RADIUS   : pResId = SIP_SA_SOFTEDGE_RADIUS; break;
+
+        case SDRATTR_CAPTIONTYPE      : pResId = SIP_SA_CAPTIONTYPE;break;
+        case SDRATTR_CAPTIONFIXEDANGLE: pResId = SIP_SA_CAPTIONFIXEDANGLE;break;
+        case SDRATTR_CAPTIONANGLE     : pResId = SIP_SA_CAPTIONANGLE;break;
+        case SDRATTR_CAPTIONGAP       : pResId = SIP_SA_CAPTIONGAP;break;
+        case SDRATTR_CAPTIONESCDIR    : pResId = SIP_SA_CAPTIONESCDIR;break;
+        case SDRATTR_CAPTIONESCISREL  : pResId = SIP_SA_CAPTIONESCISREL;break;
+        case SDRATTR_CAPTIONESCREL    : pResId = SIP_SA_CAPTIONESCREL;break;
+        case SDRATTR_CAPTIONESCABS    : pResId = SIP_SA_CAPTIONESCABS;break;
+        case SDRATTR_CAPTIONLINELEN   : pResId = SIP_SA_CAPTIONLINELEN;break;
+        case SDRATTR_CAPTIONFITLINELEN: pResId = SIP_SA_CAPTIONFITLINELEN;break;
+
+        case SDRATTR_ECKENRADIUS            : pResId = SIP_SA_ECKENRADIUS;break;
+        case SDRATTR_TEXT_MINFRAMEHEIGHT    : pResId = SIP_SA_TEXT_MINFRAMEHEIGHT;break;
+        case SDRATTR_TEXT_AUTOGROWHEIGHT    : pResId = SIP_SA_TEXT_AUTOGROWHEIGHT;break;
+        case SDRATTR_TEXT_FITTOSIZE         : pResId = SIP_SA_TEXT_FITTOSIZE;break;
+        case SDRATTR_TEXT_LEFTDIST          : pResId = SIP_SA_TEXT_LEFTDIST;break;
+        case SDRATTR_TEXT_RIGHTDIST         : pResId = SIP_SA_TEXT_RIGHTDIST;break;
+        case SDRATTR_TEXT_UPPERDIST         : pResId = SIP_SA_TEXT_UPPERDIST;break;
+        case SDRATTR_TEXT_LOWERDIST         : pResId = SIP_SA_TEXT_LOWERDIST;break;
+        case SDRATTR_TEXT_VERTADJUST        : pResId = SIP_SA_TEXT_VERTADJUST;break;
+        case SDRATTR_TEXT_MAXFRAMEHEIGHT    : pResId = SIP_SA_TEXT_MAXFRAMEHEIGHT;break;
+        case SDRATTR_TEXT_MINFRAMEWIDTH     : pResId = SIP_SA_TEXT_MINFRAMEWIDTH;break;
+        case SDRATTR_TEXT_MAXFRAMEWIDTH     : pResId = SIP_SA_TEXT_MAXFRAMEWIDTH;break;
+        case SDRATTR_TEXT_AUTOGROWWIDTH     : pResId = SIP_SA_TEXT_AUTOGROWWIDTH;break;
+        case SDRATTR_TEXT_HORZADJUST        : pResId = SIP_SA_TEXT_HORZADJUST;break;
+        case SDRATTR_TEXT_ANIKIND           : pResId = SIP_SA_TEXT_ANIKIND;break;
+        case SDRATTR_TEXT_ANIDIRECTION      : pResId = SIP_SA_TEXT_ANIDIRECTION;break;
+        case SDRATTR_TEXT_ANISTARTINSIDE    : pResId = SIP_SA_TEXT_ANISTARTINSIDE;break;
+        case SDRATTR_TEXT_ANISTOPINSIDE     : pResId = SIP_SA_TEXT_ANISTOPINSIDE;break;
+        case SDRATTR_TEXT_ANICOUNT          : pResId = SIP_SA_TEXT_ANICOUNT;break;
+        case SDRATTR_TEXT_ANIDELAY          : pResId = SIP_SA_TEXT_ANIDELAY;break;
+        case SDRATTR_TEXT_ANIAMOUNT         : pResId = SIP_SA_TEXT_ANIAMOUNT;break;
+        case SDRATTR_TEXT_CONTOURFRAME      : pResId = SIP_SA_TEXT_CONTOURFRAME;break;
+        case SDRATTR_XMLATTRIBUTES          : pResId = SIP_SA_XMLATTRIBUTES;break;
+        case SDRATTR_TEXT_USEFIXEDCELLHEIGHT: pResId = SIP_SA_TEXT_USEFIXEDCELLHEIGHT;break;
+        case SDRATTR_TEXT_WORDWRAP          : pResId = SIP_SA_WORDWRAP;break;
+        case SDRATTR_TEXT_CHAINNEXTNAME     : pResId = SIP_SA_CHAINNEXTNAME;break;
+
+        case SDRATTR_EDGEKIND           : pResId = SIP_SA_EDGEKIND;break;
+        case SDRATTR_EDGENODE1HORZDIST  : pResId = SIP_SA_EDGENODE1HORZDIST;break;
+        case SDRATTR_EDGENODE1VERTDIST  : pResId = SIP_SA_EDGENODE1VERTDIST;break;
+        case SDRATTR_EDGENODE2HORZDIST  : pResId = SIP_SA_EDGENODE2HORZDIST;break;
+        case SDRATTR_EDGENODE2VERTDIST  : pResId = SIP_SA_EDGENODE2VERTDIST;break;
+        case SDRATTR_EDGENODE1GLUEDIST  : pResId = SIP_SA_EDGENODE1GLUEDIST;break;
+        case SDRATTR_EDGENODE2GLUEDIST  : pResId = SIP_SA_EDGENODE2GLUEDIST;break;
+        case SDRATTR_EDGELINEDELTACOUNT : pResId = SIP_SA_EDGELINEDELTACOUNT;break;
+        case SDRATTR_EDGELINE1DELTA     : pResId = SIP_SA_EDGELINE1DELTA;break;
+        case SDRATTR_EDGELINE2DELTA     : pResId = SIP_SA_EDGELINE2DELTA;break;
+        case SDRATTR_EDGELINE3DELTA     : pResId = SIP_SA_EDGELINE3DELTA;break;
+
+        case SDRATTR_MEASUREKIND             : pResId = SIP_SA_MEASUREKIND;break;
+        case SDRATTR_MEASURETEXTHPOS         : pResId = SIP_SA_MEASURETEXTHPOS;break;
+        case SDRATTR_MEASURETEXTVPOS         : pResId = SIP_SA_MEASURETEXTVPOS;break;
+        case SDRATTR_MEASURELINEDIST         : pResId = SIP_SA_MEASURELINEDIST;break;
+        case SDRATTR_MEASUREHELPLINEOVERHANG : pResId = SIP_SA_MEASUREHELPLINEOVERHANG;break;
+        case SDRATTR_MEASUREHELPLINEDIST     : pResId = SIP_SA_MEASUREHELPLINEDIST;break;
+        case SDRATTR_MEASUREHELPLINE1LEN     : pResId = SIP_SA_MEASUREHELPLINE1LEN;break;
+        case SDRATTR_MEASUREHELPLINE2LEN     : pResId = SIP_SA_MEASUREHELPLINE2LEN;break;
+        case SDRATTR_MEASUREBELOWREFEDGE     : pResId = SIP_SA_MEASUREBELOWREFEDGE;break;
+        case SDRATTR_MEASURETEXTROTA90       : pResId = SIP_SA_MEASURETEXTROTA90;break;
+        case SDRATTR_MEASURETEXTUPSIDEDOWN   : pResId = SIP_SA_MEASURETEXTUPSIDEDOWN;break;
+        case SDRATTR_MEASUREOVERHANG         : pResId = SIP_SA_MEASUREOVERHANG;break;
+        case SDRATTR_MEASUREUNIT             : pResId = SIP_SA_MEASUREUNIT;break;
+        case SDRATTR_MEASURESCALE            : pResId = SIP_SA_MEASURESCALE;break;
+        case SDRATTR_MEASURESHOWUNIT         : pResId = SIP_SA_MEASURESHOWUNIT;break;
+        case SDRATTR_MEASUREFORMATSTRING     : pResId = SIP_SA_MEASUREFORMATSTRING;break;
+        case SDRATTR_MEASURETEXTAUTOANGLE    : pResId = SIP_SA_MEASURETEXTAUTOANGLE;break;
+        case SDRATTR_MEASURETEXTAUTOANGLEVIEW: pResId = SIP_SA_MEASURETEXTAUTOANGLEVIEW;break;
+        case SDRATTR_MEASURETEXTISFIXEDANGLE : pResId = SIP_SA_MEASURETEXTISFIXEDANGLE;break;
+        case SDRATTR_MEASURETEXTFIXEDANGLE   : pResId = SIP_SA_MEASURETEXTFIXEDANGLE;break;
+        case SDRATTR_MEASUREDECIMALPLACES    : pResId = SIP_SA_MEASUREDECIMALPLACES;break;
+
+        case SDRATTR_CIRCKIND      : pResId = SIP_SA_CIRCKIND;break;
+        case SDRATTR_CIRCSTARTANGLE: pResId = SIP_SA_CIRCSTARTANGLE;break;
+        case SDRATTR_CIRCENDANGLE  : pResId = SIP_SA_CIRCENDANGLE;break;
+
+        case SDRATTR_OBJMOVEPROTECT : pResId = SIP_SA_OBJMOVEPROTECT;break;
+        case SDRATTR_OBJSIZEPROTECT : pResId = SIP_SA_OBJSIZEPROTECT;break;
+        case SDRATTR_OBJPRINTABLE   : pResId = SIP_SA_OBJPRINTABLE;break;
+        case SDRATTR_OBJVISIBLE     : pResId = SIP_SA_OBJVISIBLE;break;
+        case SDRATTR_LAYERID        : pResId = SIP_SA_LAYERID;break;
+        case SDRATTR_LAYERNAME      : pResId = SIP_SA_LAYERNAME;break;
+        case SDRATTR_OBJECTNAME     : pResId = SIP_SA_OBJECTNAME;break;
+        case SDRATTR_ALLPOSITIONX   : pResId = SIP_SA_ALLPOSITIONX;break;
+        case SDRATTR_ALLPOSITIONY   : pResId = SIP_SA_ALLPOSITIONY;break;
+        case SDRATTR_ALLSIZEWIDTH   : pResId = SIP_SA_ALLSIZEWIDTH;break;
+        case SDRATTR_ALLSIZEHEIGHT  : pResId = SIP_SA_ALLSIZEHEIGHT;break;
+        case SDRATTR_ONEPOSITIONX   : pResId = SIP_SA_ONEPOSITIONX;break;
+        case SDRATTR_ONEPOSITIONY   : pResId = SIP_SA_ONEPOSITIONY;break;
+        case SDRATTR_ONESIZEWIDTH   : pResId = SIP_SA_ONESIZEWIDTH;break;
+        case SDRATTR_ONESIZEHEIGHT  : pResId = SIP_SA_ONESIZEHEIGHT;break;
+        case SDRATTR_LOGICSIZEWIDTH : pResId = SIP_SA_LOGICSIZEWIDTH;break;
+        case SDRATTR_LOGICSIZEHEIGHT: pResId = SIP_SA_LOGICSIZEHEIGHT;break;
+        case SDRATTR_ROTATEANGLE    : pResId = SIP_SA_ROTATEANGLE;break;
+        case SDRATTR_SHEARANGLE     : pResId = SIP_SA_SHEARANGLE;break;
+        case SDRATTR_MOVEX          : pResId = SIP_SA_MOVEX;break;
+        case SDRATTR_MOVEY          : pResId = SIP_SA_MOVEY;break;
+        case SDRATTR_RESIZEXONE     : pResId = SIP_SA_RESIZEXONE;break;
+        case SDRATTR_RESIZEYONE     : pResId = SIP_SA_RESIZEYONE;break;
+        case SDRATTR_ROTATEONE      : pResId = SIP_SA_ROTATEONE;break;
+        case SDRATTR_HORZSHEARONE   : pResId = SIP_SA_HORZSHEARONE;break;
+        case SDRATTR_VERTSHEARONE   : pResId = SIP_SA_VERTSHEARONE;break;
+        case SDRATTR_RESIZEXALL     : pResId = SIP_SA_RESIZEXALL;break;
+        case SDRATTR_RESIZEYALL     : pResId = SIP_SA_RESIZEYALL;break;
+        case SDRATTR_ROTATEALL      : pResId = SIP_SA_ROTATEALL;break;
+        case SDRATTR_HORZSHEARALL   : pResId = SIP_SA_HORZSHEARALL;break;
+        case SDRATTR_VERTSHEARALL   : pResId = SIP_SA_VERTSHEARALL;break;
+        case SDRATTR_TRANSFORMREF1X : pResId = SIP_SA_TRANSFORMREF1X;break;
+        case SDRATTR_TRANSFORMREF1Y : pResId = SIP_SA_TRANSFORMREF1Y;break;
+        case SDRATTR_TRANSFORMREF2X : pResId = SIP_SA_TRANSFORMREF2X;break;
+        case SDRATTR_TRANSFORMREF2Y : pResId = SIP_SA_TRANSFORMREF2Y;break;
+
+        case SDRATTR_GRAFRED            : pResId = SIP_SA_GRAFRED;break;
+        case SDRATTR_GRAFGREEN          : pResId = SIP_SA_GRAFGREEN;break;
+        case SDRATTR_GRAFBLUE           : pResId = SIP_SA_GRAFBLUE;break;
+        case SDRATTR_GRAFLUMINANCE      : pResId = SIP_SA_GRAFLUMINANCE;break;
+        case SDRATTR_GRAFCONTRAST       : pResId = SIP_SA_GRAFCONTRAST;break;
+        case SDRATTR_GRAFGAMMA          : pResId = SIP_SA_GRAFGAMMA;break;
+        case SDRATTR_GRAFTRANSPARENCE   : pResId = SIP_SA_GRAFTRANSPARENCE;break;
+        case SDRATTR_GRAFINVERT         : pResId = SIP_SA_GRAFINVERT;break;
+        case SDRATTR_GRAFMODE           : pResId = SIP_SA_GRAFMODE;break;
+        case SDRATTR_GRAFCROP           : pResId = SIP_SA_GRAFCROP;break;
+
+        case EE_PARA_HYPHENATE  : pResId = SIP_EE_PARA_HYPHENATE;break;
+        case EE_PARA_BULLETSTATE: pResId = SIP_EE_PARA_BULLETSTATE;break;
+        case EE_PARA_OUTLLRSPACE: pResId = SIP_EE_PARA_OUTLLRSPACE;break;
+        case EE_PARA_OUTLLEVEL  : pResId = SIP_EE_PARA_OUTLLEVEL;break;
+        case EE_PARA_BULLET     : pResId = SIP_EE_PARA_BULLET;break;
+        case EE_PARA_LRSPACE    : pResId = SIP_EE_PARA_LRSPACE;break;
+        case EE_PARA_ULSPACE    : pResId = SIP_EE_PARA_ULSPACE;break;
+        case EE_PARA_SBL        : pResId = SIP_EE_PARA_SBL;break;
+        case EE_PARA_JUST       : pResId = SIP_EE_PARA_JUST;break;
+        case EE_PARA_TABS       : pResId = SIP_EE_PARA_TABS;break;
+
+        case EE_CHAR_COLOR      : pResId = SIP_EE_CHAR_COLOR;break;
+        case EE_CHAR_FONTINFO   : pResId = SIP_EE_CHAR_FONTINFO;break;
+        case EE_CHAR_FONTHEIGHT : pResId = SIP_EE_CHAR_FONTHEIGHT;break;
+        case EE_CHAR_FONTWIDTH  : pResId = SIP_EE_CHAR_FONTWIDTH;break;
+        case EE_CHAR_WEIGHT     : pResId = SIP_EE_CHAR_WEIGHT;break;
+        case EE_CHAR_UNDERLINE  : pResId = SIP_EE_CHAR_UNDERLINE;break;
+        case EE_CHAR_OVERLINE   : pResId = SIP_EE_CHAR_OVERLINE;break;
+        case EE_CHAR_STRIKEOUT  : pResId = SIP_EE_CHAR_STRIKEOUT;break;
+        case EE_CHAR_ITALIC     : pResId = SIP_EE_CHAR_ITALIC;break;
+        case EE_CHAR_OUTLINE    : pResId = SIP_EE_CHAR_OUTLINE;break;
+        case EE_CHAR_SHADOW     : pResId = SIP_EE_CHAR_SHADOW;break;
+        case EE_CHAR_ESCAPEMENT : pResId = SIP_EE_CHAR_ESCAPEMENT;break;
+        case EE_CHAR_PAIRKERNING: pResId = SIP_EE_CHAR_PAIRKERNING;break;
+        case EE_CHAR_KERNING    : pResId = SIP_EE_CHAR_KERNING;break;
+        case EE_CHAR_WLM        : pResId = SIP_EE_CHAR_WLM;break;
+        case EE_FEATURE_TAB     : pResId = SIP_EE_FEATURE_TAB;break;
+        case EE_FEATURE_LINEBR  : pResId = SIP_EE_FEATURE_LINEBR;break;
+        case EE_FEATURE_NOTCONV : pResId = SIP_EE_FEATURE_NOTCONV;break;
+        case EE_FEATURE_FIELD   : pResId = SIP_EE_FEATURE_FIELD;break;
+    } // switch
+
+    return SvxResId(pResId);
+}
+
+
+// FractionItem
+
+
+bool SdrFractionItem::operator==(const SfxPoolItem& rCmp) const
+{
+    return SfxPoolItem::operator==(rCmp) &&
+           static_cast<const SdrFractionItem&>(rCmp).GetValue()==nValue;
+}
+
+bool SdrFractionItem::GetPresentation(
+    SfxItemPresentation ePresentation, MapUnit /*eCoreMetric*/,
+    MapUnit /*ePresentationMetric*/, OUString &rText, const IntlWrapper&) const
+{
+    if(nValue.IsValid())
+    {
+        sal_Int32 nDiv = nValue.GetDenominator();
+        rText = OUString::number(nValue.GetNumerator());
+
+        if(nDiv != 1)
+        {
+            rText += "/" + OUString::number(nDiv);
+        }
+    }
+    else
+    {
+        rText = "?";
+    }
+
+    if(ePresentation == SfxItemPresentation::Complete)
+    {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+        return true;
+    }
+    else if(ePresentation == SfxItemPresentation::Nameless)
+        return true;
+
+    return false;
+}
+
+SdrFractionItem* SdrFractionItem::Clone(SfxItemPool * /*pPool*/) const
+{
+    return new SdrFractionItem(Which(),GetValue());
+}
+
+
+// ScaleItem
+
+
+bool SdrScaleItem::GetPresentation(
+    SfxItemPresentation ePresentation, MapUnit /*eCoreMetric*/,
+    MapUnit /*ePresentationMetric*/, OUString &rText, const IntlWrapper&) const
+{
+    if(GetValue().IsValid())
+    {
+        sal_Int32 nDiv = GetValue().GetDenominator();
+
+        rText = OUString::number(GetValue().GetNumerator()) + ":" + OUString::number(nDiv);
+    }
+    else
+    {
+        rText = "?";
+    }
+
+    if(ePresentation == SfxItemPresentation::Complete)
+    {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+
+    return true;
+}
+
+SdrScaleItem* SdrScaleItem::Clone(SfxItemPool * /*pPool*/) const
+{
+    return new SdrScaleItem(Which(),GetValue());
+}
+
+
+// OnOffItem
+
+
+SdrOnOffItem* SdrOnOffItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrOnOffItem(Which(),GetValue());
+}
+
+OUString SdrOnOffItem::GetValueTextByVal(bool bVal) const
+{
+    if (bVal)
+        return SvxResId(STR_ItemValON);
+    return SvxResId(STR_ItemValOFF);
+}
+
+bool SdrOnOffItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByVal(GetValue());
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+
+SdrYesNoItem* SdrYesNoItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrYesNoItem(Which(),GetValue());
+}
+
+OUString SdrYesNoItem::GetValueTextByVal(bool bVal) const
+{
+    if (bVal)
+        return SvxResId(STR_ItemValYES);
+    return SvxResId(STR_ItemValNO);
+}
+
+bool SdrYesNoItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByVal(GetValue());
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+SdrPercentItem* SdrPercentItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrPercentItem(Which(),GetValue());
+}
+
+bool SdrPercentItem::GetPresentation(
+    SfxItemPresentation ePres, MapUnit /*eCoreMetric*/,
+    MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText = unicode::formatPercent(GetValue(),
+        Application::GetSettings().GetUILanguageTag());
+
+    if(ePres == SfxItemPresentation::Complete)
+    {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+
+    return true;
+}
+
+SdrAngleItem* SdrAngleItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrAngleItem(Which(),GetValue());
+}
+
+bool SdrAngleItem::GetPresentation(
+    SfxItemPresentation ePres, MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/,
+    OUString& rText, const IntlWrapper& rIntlWrapper) const
+{
+    sal_Int32 nValue(GetValue());
+    bool bNeg(nValue < 0);
+
+    if(bNeg)
+        nValue = -nValue;
+
+    OUStringBuffer aText = OUString::number(nValue);
+
+    if(nValue)
+    {
+        sal_Unicode aUnicodeNull('0');
+        sal_Int32 nCount(2);
+
+        if(LocaleDataWrapper::isNumLeadingZero())
+            nCount++;
+
+        while(aText.getLength() < nCount)
+            aText.insert(0, aUnicodeNull);
+
+        sal_Int32 nLen = aText.getLength();
+        bool bNull1(aText[nLen-1] == aUnicodeNull);
+        bool bNull2(bNull1 && aText[nLen-2] == aUnicodeNull);
+
+        if(bNull2)
+        {
+            // no decimal place(s)
+            sal_Int32 idx = nLen-2;
+            aText.remove(idx, aText.getLength()-idx);
+        }
+        else
+        {
+            sal_Unicode cDec =
+                rIntlWrapper.getLocaleData()->getNumDecimalSep()[0];
+            aText.insert(nLen-2, cDec);
+
+            if(bNull1)
+                aText.remove(nLen, aText.getLength()-nLen);
+        }
+
+        if(bNeg)
+            aText.insert(0, '-');
+    }
+
+    aText.append(sal_Unicode(DEGREE_CHAR));
+
+    if(ePres == SfxItemPresentation::Complete)
+    {
+        OUString aStr = SdrItemPool::GetItemName(Which());
+        aText.insert(0, ' ');
+        aText.insert(0, aStr);
+    }
+
+    rText = aText.makeStringAndClear();
+    return true;
+}
+
+SdrMetricItem* SdrMetricItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrMetricItem(Which(),GetValue());
+}
+
+bool SdrMetricItem::HasMetrics() const
+{
+    return true;
+}
+
+void SdrMetricItem::ScaleMetrics(long nMul, long nDiv)
+{
+    if (GetValue()!=0) {
+        BigInt aVal(GetValue());
+        aVal*=nMul;
+        aVal+=nDiv/2; // to round accurately
+        aVal/=nDiv;
+        SetValue(long(aVal));
+    }
+}
+
+bool SdrMetricItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit eCoreMetric, MapUnit ePresMetric, OUString& rText, const IntlWrapper&) const
+{
+    long nValue=GetValue();
+    SdrFormatter aFmt(eCoreMetric,ePresMetric);
+    rText = aFmt.GetStr(nValue);
+    rText += " " + SdrFormatter::GetUnitStr(ePresMetric);
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+
+// items of the legend object
+
+
+SdrCaptionTypeItem* SdrCaptionTypeItem::Clone(SfxItemPool* /*pPool*/) const                { return new SdrCaptionTypeItem(*this); }
+
+sal_uInt16 SdrCaptionTypeItem::GetValueCount() const { return 4; }
+
+OUString SdrCaptionTypeItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALCAPTIONTYPES[] =
+    {
+        STR_ItemValCAPTIONTYPE1,
+        STR_ItemValCAPTIONTYPE2,
+        STR_ItemValCAPTIONTYPE3,
+        STR_ItemValCAPTIONTYPE4
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALCAPTIONTYPES) && "wrong pos!");
+    return SvxResId(ITEMVALCAPTIONTYPES[nPos]);
+}
+
+bool SdrCaptionTypeItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+
+SdrCaptionEscDirItem* SdrCaptionEscDirItem::Clone(SfxItemPool* /*pPool*/) const              { return new SdrCaptionEscDirItem(*this); }
+
+sal_uInt16 SdrCaptionEscDirItem::GetValueCount() const { return 3; }
+
+OUString SdrCaptionEscDirItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALCAPTIONTYPES[] =
+    {
+        STR_ItemValCAPTIONESCHORI,
+        STR_ItemValCAPTIONESCVERT,
+        STR_ItemValCAPTIONESCBESTFIT
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALCAPTIONTYPES) && "wrong pos!");
+    return SvxResId(ITEMVALCAPTIONTYPES[nPos]);
+}
+
+bool SdrCaptionEscDirItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+
+// MiscItems
+
+
+// FitToSize
+
+SfxPoolItem* SdrTextFitToSizeTypeItem::CreateDefault() { return new SdrTextFitToSizeTypeItem; }
+
+SdrTextFitToSizeTypeItem* SdrTextFitToSizeTypeItem::Clone(SfxItemPool* /*pPool*/) const         { return new SdrTextFitToSizeTypeItem(*this); }
+
+bool SdrTextFitToSizeTypeItem::operator==(const SfxPoolItem& rItem) const
+{
+    if (!SfxEnumItem<css::drawing::TextFitToSizeType>::operator==(rItem))
+    {
+        return false;
+    }
+
+    return m_nMaxScale == static_cast<const SdrTextFitToSizeTypeItem&>(rItem).m_nMaxScale;
+}
+
+sal_uInt16 SdrTextFitToSizeTypeItem::GetValueCount() const { return 4; }
+
+OUString SdrTextFitToSizeTypeItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALFITTISIZETYPES[] =
+    {
+        STR_ItemValFITTOSIZENONE,
+        STR_ItemValFITTOSIZEPROP,
+        STR_ItemValFITTOSIZEALLLINES,
+        STR_ItemValFITTOSIZERESIZEAT
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALFITTISIZETYPES) && "wrong pos!");
+    return SvxResId(ITEMVALFITTISIZETYPES[nPos]);
+}
+
+bool SdrTextFitToSizeTypeItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrTextFitToSizeTypeItem::HasBoolValue() const { return true; }
+
+bool SdrTextFitToSizeTypeItem::GetBoolValue() const { return GetValue() != drawing::TextFitToSizeType_NONE; }
+
+void SdrTextFitToSizeTypeItem::SetBoolValue(bool bVal)
+{
+    SetValue(bVal ? drawing::TextFitToSizeType_PROPORTIONAL : drawing::TextFitToSizeType_NONE);
+}
+
+bool SdrTextFitToSizeTypeItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    drawing::TextFitToSizeType eFS = GetValue();
+    rVal <<= eFS;
+
+    return true;
+}
+
+bool SdrTextFitToSizeTypeItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::TextFitToSizeType eFS;
+    if(!(rVal >>= eFS))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        eFS = static_cast<drawing::TextFitToSizeType>(nEnum);
+    }
+
+    SetValue(eFS);
+
+    return true;
+}
+
+
+SdrTextVertAdjustItem* SdrTextVertAdjustItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrTextVertAdjustItem(*this); }
+
+sal_uInt16 SdrTextVertAdjustItem::GetValueCount() const { return 5; }
+
+OUString SdrTextVertAdjustItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALTEXTVADJTYPES[] =
+    {
+        STR_ItemValTEXTVADJTOP,
+        STR_ItemValTEXTVADJCENTER,
+        STR_ItemValTEXTVADJBOTTOM,
+        STR_ItemValTEXTVADJBLOCK,
+        STR_ItemValTEXTVADJSTRETCH
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALTEXTVADJTYPES) && "wrong pos!");
+    return SvxResId(ITEMVALTEXTVADJTYPES[nPos]);
+}
+
+bool SdrTextVertAdjustItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrTextVertAdjustItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<drawing::TextVerticalAdjust>(GetValue());
+    return true;
+}
+
+bool SdrTextVertAdjustItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::TextVerticalAdjust eAdj;
+    if(!(rVal >>= eAdj))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        eAdj = static_cast<drawing::TextVerticalAdjust>(nEnum);
+    }
+
+    SetValue( static_cast<SdrTextVertAdjust>(eAdj) );
+
+    return true;
+}
+
+void SdrTextVertAdjustItem::dumpAsXml(xmlTextWriterPtr pWriter) const
+{
+    xmlTextWriterStartElement(pWriter, BAD_CAST("SdrTextVertAdjustItem"));
+    xmlTextWriterWriteAttribute(pWriter, BAD_CAST("whichId"), BAD_CAST(OString::number(Which()).getStr()));
+    xmlTextWriterWriteAttribute(pWriter, BAD_CAST("value"), BAD_CAST(OString::number(GetValue()).getStr()));
+    xmlTextWriterEndElement(pWriter);
+}
+
+SdrTextHorzAdjustItem* SdrTextHorzAdjustItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrTextHorzAdjustItem(*this); }
+
+sal_uInt16 SdrTextHorzAdjustItem::GetValueCount() const { return 5; }
+
+OUString SdrTextHorzAdjustItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALTEXTHADJTYPES[] =
+    {
+        STR_ItemValTEXTHADJLEFT,
+        STR_ItemValTEXTHADJCENTER,
+        STR_ItemValTEXTHADJRIGHT,
+        STR_ItemValTEXTHADJBLOCK,
+        STR_ItemValTEXTHADJSTRETCH
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALTEXTHADJTYPES) && "wrong pos!");
+    return SvxResId(ITEMVALTEXTHADJTYPES[nPos]);
+}
+
+bool SdrTextHorzAdjustItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrTextHorzAdjustItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<drawing::TextHorizontalAdjust>(GetValue());
+    return true;
+}
+
+bool SdrTextHorzAdjustItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::TextHorizontalAdjust eAdj;
+    if(!(rVal >>= eAdj))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        eAdj = static_cast<drawing::TextHorizontalAdjust>(nEnum);
+    }
+
+    SetValue( static_cast<SdrTextHorzAdjust>(eAdj) );
+
+    return true;
+}
+
+
+SdrTextAniKindItem* SdrTextAniKindItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrTextAniKindItem(*this); }
+
+sal_uInt16 SdrTextAniKindItem::GetValueCount() const { return 5; }
+
+OUString SdrTextAniKindItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALTEXTANITYPES[] =
+    {
+        STR_ItemValTEXTANI_NONE,
+        STR_ItemValTEXTANI_BLINK,
+        STR_ItemValTEXTANI_SCROLL,
+        STR_ItemValTEXTANI_ALTERNATE,
+        STR_ItemValTEXTANI_SLIDE
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALTEXTANITYPES) && "wrong pos!");
+    return SvxResId(ITEMVALTEXTANITYPES[nPos]);
+}
+
+bool SdrTextAniKindItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrTextAniKindItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<drawing::TextAnimationKind>(GetValue());
+    return true;
+}
+
+bool SdrTextAniKindItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::TextAnimationKind eKind;
+    if(!(rVal >>= eKind))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+        eKind = static_cast<drawing::TextAnimationKind>(nEnum);
+    }
+
+    SetValue( static_cast<SdrTextAniKind>(eKind) );
+
+    return true;
+}
+
+
+SdrTextAniDirectionItem* SdrTextAniDirectionItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrTextAniDirectionItem(*this); }
+
+sal_uInt16 SdrTextAniDirectionItem::GetValueCount() const { return 4; }
+
+OUString SdrTextAniDirectionItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALTEXTANITYPES[] =
+    {
+        STR_ItemValTEXTANI_LEFT,
+        STR_ItemValTEXTANI_UP,
+        STR_ItemValTEXTANI_RIGHT,
+        STR_ItemValTEXTANI_DOWN
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALTEXTANITYPES) && "wrong pos!");
+    return SvxResId(ITEMVALTEXTANITYPES[nPos]);
+}
+
+bool SdrTextAniDirectionItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrTextAniDirectionItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<drawing::TextAnimationDirection>(GetValue());
+    return true;
+}
+
+bool SdrTextAniDirectionItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::TextAnimationDirection eDir;
+    if(!(rVal >>= eDir))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        eDir = static_cast<drawing::TextAnimationDirection>(nEnum);
+    }
+
+    SetValue( static_cast<SdrTextAniDirection>(eDir) );
+
+    return true;
+}
+
+
+SdrTextAniDelayItem* SdrTextAniDelayItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrTextAniDelayItem(*this); }
+
+bool SdrTextAniDelayItem::GetPresentation(
+    SfxItemPresentation ePres, MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/,
+    OUString& rText, const IntlWrapper&) const
+{
+    rText = OUString::number(GetValue()) + "ms";
+
+    if(ePres == SfxItemPresentation::Complete)
+    {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+
+    return true;
+}
+
+
+SdrTextAniAmountItem* SdrTextAniAmountItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrTextAniAmountItem(*this); }
+
+bool SdrTextAniAmountItem::HasMetrics() const
+{
+    return GetValue()>0;
+}
+
+void SdrTextAniAmountItem::ScaleMetrics(long nMul, long nDiv)
+{
+    if (GetValue()>0) {
+        BigInt aVal(GetValue());
+        aVal*=nMul;
+        aVal+=nDiv/2; // to round accurately
+        aVal/=nDiv;
+        SetValue(short(aVal));
+    }
+}
+
+bool SdrTextAniAmountItem::GetPresentation(
+    SfxItemPresentation ePres, MapUnit eCoreMetric, MapUnit ePresMetric,
+    OUString& rText, const IntlWrapper&) const
+{
+    sal_Int32 nValue(GetValue());
+
+    if(!nValue)
+        nValue = -1;
+
+    if(nValue < 0)
+    {
+        rText = OUString::number(-nValue) + "pixel";
+    }
+    else
+    {
+        SdrFormatter aFmt(eCoreMetric, ePresMetric);
+        rText = aFmt.GetStr(nValue) +
+            SdrFormatter::GetUnitStr(ePresMetric);
+    }
+
+    if(ePres == SfxItemPresentation::Complete)
+    {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+
+    return true;
+}
+
+
+SdrTextFixedCellHeightItem::SdrTextFixedCellHeightItem( bool bUseFixedCellHeight )
+    : SfxBoolItem( SDRATTR_TEXT_USEFIXEDCELLHEIGHT, bUseFixedCellHeight )
+{
+}
+bool SdrTextFixedCellHeightItem::GetPresentation( SfxItemPresentation ePres,
+                                    MapUnit /*eCoreMetric*/, MapUnit /*ePresentationMetric*/,
+                                    OUString &rText, const IntlWrapper& ) const
+{
+    rText = GetValueTextByVal( GetValue() );
+    if (ePres==SfxItemPresentation::Complete)
+    {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+SdrTextFixedCellHeightItem* SdrTextFixedCellHeightItem::Clone( SfxItemPool * /*pPool*/) const
+{
+    return new SdrTextFixedCellHeightItem( GetValue() );
+}
+
+bool SdrTextFixedCellHeightItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    bool bValue = GetValue();
+    rVal <<= bValue;
+    return true;
+}
+bool SdrTextFixedCellHeightItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    bool bValue;
+    if( !( rVal >>= bValue ) )
+        return false;
+    SetValue( bValue );
+    return true;
+}
+
+// EdgeKind
+
+SdrEdgeKindItem* SdrEdgeKindItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrEdgeKindItem(*this); }
+
+sal_uInt16 SdrEdgeKindItem::GetValueCount() const { return 4; }
+
+OUString SdrEdgeKindItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALEDGES[] =
+    {
+        STR_ItemValEDGE_ORTHOLINES,
+        STR_ItemValEDGE_THREELINES,
+        STR_ItemValEDGE_ONELINE,
+        STR_ItemValEDGE_BEZIER
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALEDGES) && "wrong pos!");
+    return SvxResId(ITEMVALEDGES[nPos]);
+}
+
+bool SdrEdgeKindItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrEdgeKindItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    drawing::ConnectorType eCT = drawing::ConnectorType_STANDARD;
+
+    switch( GetValue() )
+    {
+        case SdrEdgeKind::OrthoLines :   eCT = drawing::ConnectorType_STANDARD; break;
+        case SdrEdgeKind::ThreeLines :   eCT = drawing::ConnectorType_LINES; break;
+        case SdrEdgeKind::OneLine :      eCT = drawing::ConnectorType_LINE;  break;
+        case SdrEdgeKind::Bezier :       eCT = drawing::ConnectorType_CURVE; break;
+        case SdrEdgeKind::Arc :          eCT = drawing::ConnectorType_CURVE; break;
+        default:
+            OSL_FAIL( "SdrEdgeKindItem::QueryValue : unknown enum" );
+    }
+
+    rVal <<= eCT;
+
+    return true;
+}
+
+bool SdrEdgeKindItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::ConnectorType eCT;
+    if(!(rVal >>= eCT))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        eCT = static_cast<drawing::ConnectorType>(nEnum);
+    }
+
+    SdrEdgeKind eEK = SdrEdgeKind::OrthoLines;
+    switch( eCT )
+    {
+        case drawing::ConnectorType_STANDARD :  eEK = SdrEdgeKind::OrthoLines;   break;
+        case drawing::ConnectorType_CURVE :     eEK = SdrEdgeKind::Bezier;       break;
+        case drawing::ConnectorType_LINE :       eEK = SdrEdgeKind::OneLine;     break;
+        case drawing::ConnectorType_LINES :      eEK = SdrEdgeKind::ThreeLines;   break;
+        default:
+            OSL_FAIL( "SdrEdgeKindItem::PuValue : unknown enum" );
+    }
+    SetValue( eEK );
+
+    return true;
+}
+
+bool SdrEdgeNode1HorzDistItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= GetValue();
+    return true;
+}
+
+bool SdrEdgeNode1HorzDistItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    sal_Int32 nValue = 0;
+    if(!(rVal >>= nValue))
+        return false;
+
+    SetValue( nValue );
+    return true;
+}
+
+SdrEdgeNode1HorzDistItem* SdrEdgeNode1HorzDistItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrEdgeNode1HorzDistItem(*this);
+}
+
+bool SdrEdgeNode1VertDistItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= GetValue();
+    return true;
+}
+
+bool SdrEdgeNode1VertDistItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    sal_Int32 nValue = 0;
+    if(!(rVal >>= nValue))
+        return false;
+
+    SetValue( nValue );
+    return true;
+}
+
+SdrEdgeNode1VertDistItem* SdrEdgeNode1VertDistItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrEdgeNode1VertDistItem(*this);
+}
+
+bool SdrEdgeNode2HorzDistItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= GetValue();
+    return true;
+}
+
+bool SdrEdgeNode2HorzDistItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    sal_Int32 nValue = 0;
+    if(!(rVal >>= nValue))
+        return false;
+
+    SetValue( nValue );
+    return true;
+}
+
+SdrEdgeNode2HorzDistItem* SdrEdgeNode2HorzDistItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrEdgeNode2HorzDistItem(*this);
+}
+
+bool SdrEdgeNode2VertDistItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= GetValue();
+    return true;
+}
+
+bool SdrEdgeNode2VertDistItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    sal_Int32 nValue = 0;
+    if(!(rVal >>= nValue))
+        return false;
+
+    SetValue( nValue );
+    return true;
+}
+
+SdrEdgeNode2VertDistItem* SdrEdgeNode2VertDistItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrEdgeNode2VertDistItem(*this);
+}
+
+SdrEdgeNode1GlueDistItem* SdrEdgeNode1GlueDistItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrEdgeNode1GlueDistItem(*this);
+}
+
+SdrEdgeNode2GlueDistItem* SdrEdgeNode2GlueDistItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrEdgeNode2GlueDistItem(*this);
+}
+
+SdrMeasureKindItem* SdrMeasureKindItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrMeasureKindItem(*this); }
+
+sal_uInt16 SdrMeasureKindItem::GetValueCount() const { return 2; }
+
+OUString SdrMeasureKindItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALMEASURETYPES[] =
+    {
+        STR_ItemValMEASURE_STD,
+        STR_ItemValMEASURE_RADIUS
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALMEASURETYPES) && "wrong pos!");
+    return SvxResId(ITEMVALMEASURETYPES[nPos]);
+}
+
+bool SdrMeasureKindItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrMeasureKindItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<drawing::MeasureKind>(GetValue());
+    return true;
+}
+
+bool SdrMeasureKindItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::MeasureKind eKind;
+    if(!(rVal >>= eKind))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        eKind = static_cast<drawing::MeasureKind>(nEnum);
+    }
+
+    SetValue( static_cast<SdrMeasureKind>(eKind) );
+    return true;
+}
+
+
+SdrMeasureTextHPosItem* SdrMeasureTextHPosItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrMeasureTextHPosItem(*this); }
+
+sal_uInt16 SdrMeasureTextHPosItem::GetValueCount() const { return 4; }
+
+OUString SdrMeasureTextHPosItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALMEASURETEXTTYPES[] =
+    {
+        STR_ItemValMEASURE_TEXTHAUTO,
+        STR_ItemValMEASURE_TEXTLEFTOUTSIDE,
+        STR_ItemValMEASURE_TEXTINSIDE,
+        STR_ItemValMEASURE_TEXTRIGHTOUTSID
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALMEASURETEXTTYPES) && "wrong pos!");
+    return SvxResId(ITEMVALMEASURETEXTTYPES[nPos]);
+}
+
+bool SdrMeasureTextHPosItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrMeasureTextHPosItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= GetValue();
+    return true;
+}
+
+bool SdrMeasureTextHPosItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::MeasureTextHorzPos ePos;
+    if(!(rVal >>= ePos))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        ePos = static_cast<drawing::MeasureTextHorzPos>(nEnum);
+    }
+
+    SetValue(ePos);
+    return true;
+}
+
+SdrMeasureTextVPosItem* SdrMeasureTextVPosItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrMeasureTextVPosItem(*this); }
+
+sal_uInt16 SdrMeasureTextVPosItem::GetValueCount() const { return 5; }
+
+OUString SdrMeasureTextVPosItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALMEASURETEXTTYPES[] =
+    {
+        STR_ItemValMEASURE_TEXTVAUTO,
+        STR_ItemValMEASURE_ABOVE,
+        STR_ItemValMEASURETEXT_BREAKEDLINE,
+        STR_ItemValMEASURE_BELOW,
+        STR_ItemValMEASURETEXT_VERTICALCEN
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALMEASURETEXTTYPES) && "wrong pos!");
+    return SvxResId(ITEMVALMEASURETEXTTYPES[nPos]);
+}
+
+bool SdrMeasureTextVPosItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrMeasureTextVPosItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= GetValue();
+    return true;
+}
+
+bool SdrMeasureTextVPosItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::MeasureTextVertPos ePos;
+    if(!(rVal >>= ePos))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        ePos = static_cast<drawing::MeasureTextVertPos>(nEnum);
+    }
+
+    SetValue(ePos);
+    return true;
+}
+
+SdrMeasureUnitItem* SdrMeasureUnitItem::Clone(SfxItemPool* /*pPool*/) const            { return new SdrMeasureUnitItem(*this); }
+
+sal_uInt16 SdrMeasureUnitItem::GetValueCount() const { return 14; }
+
+OUString SdrMeasureUnitItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    if(static_cast<FieldUnit>(nPos) == FieldUnit::NONE)
+        return "default";
+    else
+        return SdrFormatter::GetUnitStr(static_cast<FieldUnit>(nPos));
+}
+
+bool SdrMeasureUnitItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrMeasureUnitItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<sal_Int32>(GetValue());
+    return true;
+}
+
+bool SdrMeasureUnitItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    sal_Int32 nMeasure = 0;
+    if(!(rVal >>= nMeasure))
+        return false;
+
+    SetValue( static_cast<FieldUnit>(nMeasure) );
+    return true;
+}
+
+
+SdrCircKindItem* SdrCircKindItem::Clone(SfxItemPool* /*pPool*/) const          { return new SdrCircKindItem(*this); }
+
+sal_uInt16 SdrCircKindItem::GetValueCount() const { return 4; }
+
+OUString SdrCircKindItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    static const char* ITEMVALCIRCTYPES[] =
+    {
+        STR_ItemValCIRC_FULL,
+        STR_ItemValCIRC_SECT,
+        STR_ItemValCIRC_CUT,
+        STR_ItemValCIRC_ARC
+    };
+    assert(nPos < SAL_N_ELEMENTS(ITEMVALCIRCTYPES) && "wrong pos!");
+    return SvxResId(ITEMVALCIRCTYPES[nPos]);
+}
+
+bool SdrCircKindItem::GetPresentation(SfxItemPresentation ePres,
+                      MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/, OUString& rText, const IntlWrapper&) const
+{
+    rText=GetValueTextByPos(sal::static_int_cast< sal_uInt16 >(GetValue()));
+    if (ePres==SfxItemPresentation::Complete) {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+    return true;
+}
+
+bool SdrCircKindItem::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<drawing::CircleKind>(GetValue());
+    return true;
+}
+
+bool SdrCircKindItem::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    drawing::CircleKind eKind;
+    if(!(rVal >>= eKind))
+    {
+        sal_Int32 nEnum = 0;
+        if(!(rVal >>= nEnum))
+            return false;
+
+        eKind = static_cast<drawing::CircleKind>(nEnum);
+    }
+
+    SetValue( static_cast<SdrCircKind>(eKind) );
+    return true;
+}
+
+SdrSignedPercentItem* SdrSignedPercentItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrSignedPercentItem( Which(), GetValue() );
+}
+
+bool SdrSignedPercentItem::GetPresentation(
+    SfxItemPresentation ePres, MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/,
+    OUString& rText, const IntlWrapper&) const
+{
+    rText = unicode::formatPercent(GetValue(),
+        Application::GetSettings().GetUILanguageTag());
+
+    if(ePres == SfxItemPresentation::Complete)
+    {
+        rText = SdrItemPool::GetItemName(Which()) + " " + rText;
+    }
+
+    return true;
+}
+
+SdrGrafRedItem* SdrGrafRedItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafRedItem( *this );
+}
+
+SdrGrafGreenItem* SdrGrafGreenItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafGreenItem( *this );
+}
+
+SdrGrafBlueItem* SdrGrafBlueItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafBlueItem( *this );
+}
+
+SdrGrafLuminanceItem* SdrGrafLuminanceItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafLuminanceItem( *this );
+}
+
+SdrGrafContrastItem* SdrGrafContrastItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafContrastItem( *this );
+}
+
+SdrGrafGamma100Item* SdrGrafGamma100Item::Clone( SfxItemPool* /*pPool */) const
+{
+    return new SdrGrafGamma100Item( *this );
+}
+
+bool SdrGrafGamma100Item::QueryValue( uno::Any& rVal, sal_uInt8 /*nMemberId*/) const
+{
+    rVal <<= static_cast<double>(GetValue()) / 100.0;
+    return true;
+}
+
+bool SdrGrafGamma100Item::PutValue( const uno::Any& rVal, sal_uInt8 /*nMemberId*/)
+{
+    double nGamma = 0;
+    if(!(rVal >>= nGamma))
+        return false;
+
+    SetValue( static_cast<sal_uInt32>(nGamma * 100.0  ) );
+    return true;
+}
+
+SdrGrafInvertItem* SdrGrafInvertItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafInvertItem( *this );
+}
+
+SdrGrafTransparenceItem* SdrGrafTransparenceItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafTransparenceItem( *this );
+}
+
+SdrGrafModeItem* SdrGrafModeItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafModeItem( *this );
+}
+
+sal_uInt16 SdrGrafModeItem::GetValueCount() const
+{
+    return 4;
+}
+
+OUString SdrGrafModeItem::GetValueTextByPos(sal_uInt16 nPos)
+{
+    OUString aStr;
+
+    switch(nPos)
+    {
+        case 1:
+        {
+            aStr = "Greys";
+            break;
+        }
+        case 2:
+        {
+            aStr = "Black/White";
+            break;
+        }
+        case 3:
+        {
+            aStr = "Watermark";
+            break;
+        }
+        default:
+        {
+            aStr = "Standard";
+            break;
+        }
+    }
+
+    return aStr;
+}
+
+bool SdrGrafModeItem::GetPresentation( SfxItemPresentation ePres,
+                                                               MapUnit /*eCoreMetric*/, MapUnit /*ePresMetric*/,
+                                                               OUString& rText, const IntlWrapper&) const
+{
+    rText = GetValueTextByPos( sal::static_int_cast< sal_uInt16 >( GetValue() ) );
+
+    if( ePres == SfxItemPresentation::Complete )
+    {
+        rText = SdrItemPool::GetItemName( Which() ) + " " + rText;
+    }
+
+    return true;
+}
+
+SdrGrafCropItem* SdrGrafCropItem::Clone( SfxItemPool* /*pPool*/) const
+{
+    return new SdrGrafCropItem( *this );
+}
+
+SdrTextAniStartInsideItem::~SdrTextAniStartInsideItem()
+{
+}
+
+SdrTextAniStartInsideItem* SdrTextAniStartInsideItem::Clone(SfxItemPool* ) const
+{
+    return new SdrTextAniStartInsideItem(*this);
+}
+
+SdrTextAniStopInsideItem::~SdrTextAniStopInsideItem()
+{
+}
+
+SdrTextAniStopInsideItem* SdrTextAniStopInsideItem::Clone(SfxItemPool* ) const
+{
+    return new SdrTextAniStopInsideItem(*this);
+}
+
+SdrCaptionEscIsRelItem::~SdrCaptionEscIsRelItem()
+{
+}
+
+SdrCaptionEscIsRelItem* SdrCaptionEscIsRelItem::Clone(SfxItemPool* ) const
+{
+    return new SdrCaptionEscIsRelItem(*this);
+}
+
+SdrCaptionEscRelItem::~SdrCaptionEscRelItem()
+{
+}
+
+SdrCaptionEscRelItem* SdrCaptionEscRelItem::Clone(SfxItemPool*) const
+{
+    return new SdrCaptionEscRelItem(*this);
+}
+
+SdrCaptionFitLineLenItem::~SdrCaptionFitLineLenItem()
+{
+}
+
+SdrCaptionFitLineLenItem* SdrCaptionFitLineLenItem::Clone(SfxItemPool* ) const
+{
+    return new SdrCaptionFitLineLenItem(*this);
+}
+
+SdrCaptionLineLenItem::~SdrCaptionLineLenItem()
+{
+}
+
+SdrCaptionLineLenItem* SdrCaptionLineLenItem::Clone(SfxItemPool*) const
+{
+    return new SdrCaptionLineLenItem(*this);
+}
+
+SdrMeasureBelowRefEdgeItem::~SdrMeasureBelowRefEdgeItem()
+{
+}
+
+SdrMeasureBelowRefEdgeItem* SdrMeasureBelowRefEdgeItem::Clone(SfxItemPool* ) const
+{
+    return new SdrMeasureBelowRefEdgeItem(*this);
+}
+
+SdrMeasureTextIsFixedAngleItem::~SdrMeasureTextIsFixedAngleItem()
+{
+}
+
+SdrMeasureTextIsFixedAngleItem* SdrMeasureTextIsFixedAngleItem::Clone(SfxItemPool* ) const
+{
+    return new SdrMeasureTextIsFixedAngleItem(*this);
+}
+
+SdrMeasureTextFixedAngleItem::~SdrMeasureTextFixedAngleItem()
+{
+}
+
+SdrMeasureTextFixedAngleItem* SdrMeasureTextFixedAngleItem::Clone(SfxItemPool* ) const
+{
+    return new SdrMeasureTextFixedAngleItem(*this);
+}
+
+SdrMeasureDecimalPlacesItem::~SdrMeasureDecimalPlacesItem()
+{
+}
+
+SdrMeasureDecimalPlacesItem* SdrMeasureDecimalPlacesItem::Clone(SfxItemPool* ) const
+{
+    return new SdrMeasureDecimalPlacesItem(*this);
+}
+
+SdrMeasureTextRota90Item::~SdrMeasureTextRota90Item()
+{
+}
+
+SdrMeasureTextRota90Item* SdrMeasureTextRota90Item::Clone(SfxItemPool* ) const
+{
+    return new SdrMeasureTextRota90Item(*this);
+}
+
+SdrMeasureTextUpsideDownItem::~SdrMeasureTextUpsideDownItem()
+{
+}
+
+SdrMeasureTextUpsideDownItem* SdrMeasureTextUpsideDownItem::Clone(SfxItemPool* ) const
+{
+    return new SdrMeasureTextUpsideDownItem(*this);
+}
+
+SdrLayerIdItem* SdrLayerIdItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrLayerIdItem(*this);
+}
+
+SdrLayerNameItem* SdrLayerNameItem::Clone(SfxItemPool* /*pPool*/) const
+{
+    return new SdrLayerNameItem(*this);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdcrtv.cxx b/svx/source/svdraw/svdcrtv.cxx
new file mode 100644
index 000000000..3d2230a8b
--- /dev/null
+++ b/svx/source/svdraw/svdcrtv.cxx
@@ -0,0 +1,921 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdcrtv.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/svdocapt.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/scene3d.hxx>
+#include <svx/view3d.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/svdouno.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/sdr/overlay/overlaypolypolygon.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <fmobj.hxx>
+#include <svx/svdocirc.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <svx/sdr/overlay/overlayprimitive2dsequenceobject.hxx>
+#include <vcl/ptrstyle.hxx>
+
+using namespace com::sun::star;
+
+class ImplConnectMarkerOverlay
+{
+    // The OverlayObjects
+    sdr::overlay::OverlayObjectList               maObjects;
+
+    // The remembered target object
+    const SdrObject&                                mrObject;
+
+public:
+    ImplConnectMarkerOverlay(const SdrCreateView& rView, SdrObject const & rObject);
+
+    // The OverlayObjects are cleared using the destructor of OverlayObjectList.
+    // That destructor calls clear() at the list which removes all objects from the
+    // OverlayManager and deletes them.
+
+    const SdrObject& GetTargetObject() const { return mrObject; }
+};
+
+ImplConnectMarkerOverlay::ImplConnectMarkerOverlay(const SdrCreateView& rView, SdrObject const & rObject)
+:   mrObject(rObject)
+{
+    basegfx::B2DPolyPolygon aB2DPolyPolygon(rObject.TakeXorPoly());
+
+    for(sal_uInt32 a(0); a < rView.PaintWindowCount(); a++)
+    {
+        SdrPaintWindow* pCandidate = rView.GetPaintWindow(a);
+        const rtl::Reference< sdr::overlay::OverlayManager >& xTargetOverlay = pCandidate->GetOverlayManager();
+
+        if(xTargetOverlay.is())
+        {
+            float fScalingFactor = xTargetOverlay->getOutputDevice().GetDPIScaleFactor();
+            Size aHalfLogicSize(xTargetOverlay->getOutputDevice().PixelToLogic(Size(4 * fScalingFactor, 4 * fScalingFactor)));
+
+            // object
+            std::unique_ptr<sdr::overlay::OverlayPolyPolygonStripedAndFilled> pNew(new sdr::overlay::OverlayPolyPolygonStripedAndFilled(
+                aB2DPolyPolygon));
+            xTargetOverlay->add(*pNew);
+            maObjects.append(std::move(pNew));
+
+            // glue points
+            for(sal_uInt16 i(0); i < 4; i++)
+            {
+                SdrGluePoint aGluePoint(rObject.GetVertexGluePoint(i));
+                const Point& rPosition = aGluePoint.GetAbsolutePos(rObject);
+
+                basegfx::B2DPoint aTopLeft(rPosition.X() - aHalfLogicSize.Width(), rPosition.Y() - aHalfLogicSize.Height());
+                basegfx::B2DPoint aBottomRight(rPosition.X() + aHalfLogicSize.Width(), rPosition.Y() + aHalfLogicSize.Height());
+
+                basegfx::B2DPolygon aTempPoly;
+                aTempPoly.append(aTopLeft);
+                aTempPoly.append(basegfx::B2DPoint(aBottomRight.getX(), aTopLeft.getY()));
+                aTempPoly.append(aBottomRight);
+                aTempPoly.append(basegfx::B2DPoint(aTopLeft.getX(), aBottomRight.getY()));
+                aTempPoly.setClosed(true);
+
+                basegfx::B2DPolyPolygon aTempPolyPoly;
+                aTempPolyPoly.append(aTempPoly);
+
+                std::unique_ptr<sdr::overlay::OverlayPolyPolygonStripedAndFilled> pNew2(new sdr::overlay::OverlayPolyPolygonStripedAndFilled(
+                    aTempPolyPoly));
+                xTargetOverlay->add(*pNew2);
+                maObjects.append(std::move(pNew2));
+            }
+        }
+    }
+}
+
+class ImpSdrCreateViewExtraData
+{
+    // The OverlayObjects for XOR replacement
+    sdr::overlay::OverlayObjectList               maObjects;
+
+public:
+    ImpSdrCreateViewExtraData();
+    ~ImpSdrCreateViewExtraData();
+
+    void CreateAndShowOverlay(const SdrCreateView& rView, const SdrObject* pObject, const basegfx::B2DPolyPolygon& rPolyPoly);
+    void HideOverlay();
+};
+
+ImpSdrCreateViewExtraData::ImpSdrCreateViewExtraData()
+{
+}
+
+ImpSdrCreateViewExtraData::~ImpSdrCreateViewExtraData()
+{
+    HideOverlay();
+}
+
+void ImpSdrCreateViewExtraData::CreateAndShowOverlay(const SdrCreateView& rView, const SdrObject* pObject, const basegfx::B2DPolyPolygon& rPolyPoly)
+{
+    for(sal_uInt32 a(0); a < rView.PaintWindowCount(); a++)
+    {
+        SdrPaintWindow* pCandidate = rView.GetPaintWindow(a);
+        const rtl::Reference<sdr::overlay::OverlayManager>& xOverlayManager = pCandidate->GetOverlayManager();
+
+        if (xOverlayManager.is())
+        {
+            if(pObject)
+            {
+                const sdr::contact::ViewContact& rVC = pObject->GetViewContact();
+                const drawinglayer::primitive2d::Primitive2DContainer& aSequence = rVC.getViewIndependentPrimitive2DContainer();
+                std::unique_ptr<sdr::overlay::OverlayObject> pNew(new sdr::overlay::OverlayPrimitive2DSequenceObject(aSequence));
+
+                xOverlayManager->add(*pNew);
+                maObjects.append(std::move(pNew));
+            }
+
+            if(rPolyPoly.count())
+            {
+                std::unique_ptr<sdr::overlay::OverlayPolyPolygonStripedAndFilled> pNew(new sdr::overlay::OverlayPolyPolygonStripedAndFilled(
+                    rPolyPoly));
+                xOverlayManager->add(*pNew);
+                maObjects.append(std::move(pNew));
+            }
+        }
+    }
+}
+
+void ImpSdrCreateViewExtraData::HideOverlay()
+{
+    // the clear() call of the list removes all objects from the
+    // OverlayManager and deletes them.
+    maObjects.clear();
+}
+
+
+// CreateView
+
+
+void SdrCreateView::ImpClearConnectMarker()
+{
+    mpCoMaOverlay.reset();
+}
+
+void SdrCreateView::ImpClearVars()
+{
+    nCurrentInvent=SdrInventor::Default;
+    nCurrentIdent=OBJ_NONE;
+    pCurrentCreate=nullptr;
+    pCreatePV=nullptr;
+    b1stPointAsCenter=false;
+    aCurrentCreatePointer=PointerStyle::Cross;
+    bUseIncompatiblePathCreateInterface=false;
+    nAutoCloseDistPix=5;
+    nFreeHandMinDistPix=10;
+
+    ImpClearConnectMarker();
+}
+
+SdrCreateView::SdrCreateView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrDragView(rSdrModel, pOut),
+    mpCreateViewExtraData(new ImpSdrCreateViewExtraData()),
+    aCurrentCreatePointer(PointerStyle::Arrow)
+{
+    ImpClearVars();
+}
+
+SdrCreateView::~SdrCreateView()
+{
+    ImpClearConnectMarker();
+    mpCreateViewExtraData.reset();
+    SdrObject::Free( pCurrentCreate );
+}
+
+bool SdrCreateView::IsAction() const
+{
+    return SdrDragView::IsAction() || pCurrentCreate!=nullptr;
+}
+
+void SdrCreateView::MovAction(const Point& rPnt)
+{
+    SdrDragView::MovAction(rPnt);
+    if (pCurrentCreate!=nullptr) {
+        MovCreateObj(rPnt);
+    }
+}
+
+void SdrCreateView::EndAction()
+{
+    if (pCurrentCreate!=nullptr) EndCreateObj(SdrCreateCmd::ForceEnd);
+    SdrDragView::EndAction();
+}
+
+void SdrCreateView::BckAction()
+{
+    if (pCurrentCreate!=nullptr) BckCreateObj();
+    SdrDragView::BckAction();
+}
+
+void SdrCreateView::BrkAction()
+{
+    SdrDragView::BrkAction();
+    BrkCreateObj();
+}
+
+void SdrCreateView::TakeActionRect(tools::Rectangle& rRect) const
+{
+    if (pCurrentCreate!=nullptr)
+    {
+        rRect=maDragStat.GetActionRect();
+        if (rRect.IsEmpty())
+        {
+            rRect=tools::Rectangle(maDragStat.GetPrev(),maDragStat.GetNow());
+        }
+    }
+    else
+    {
+        SdrDragView::TakeActionRect(rRect);
+    }
+}
+
+bool SdrCreateView::CheckEdgeMode()
+{
+    if (pCurrentCreate!=nullptr)
+    {
+        // is managed by EdgeObj
+        if (nCurrentInvent==SdrInventor::Default && nCurrentIdent==OBJ_EDGE) return false;
+    }
+
+    if (!IsCreateMode() || nCurrentInvent!=SdrInventor::Default || nCurrentIdent!=OBJ_EDGE)
+    {
+        ImpClearConnectMarker();
+        return false;
+    }
+    else
+    {
+        // sal_True, if MouseMove should check Connect
+        return !IsAction();
+    }
+}
+
+void SdrCreateView::SetConnectMarker(const SdrObjConnection& rCon)
+{
+    SdrObject* pTargetObject = rCon.pObj;
+
+    if(pTargetObject)
+    {
+        // if target object changes, throw away overlay object to make room for changes
+        if(mpCoMaOverlay && pTargetObject != &mpCoMaOverlay->GetTargetObject())
+        {
+            ImpClearConnectMarker();
+        }
+
+        if(!mpCoMaOverlay)
+        {
+            mpCoMaOverlay.reset(new ImplConnectMarkerOverlay(*this, *pTargetObject));
+        }
+    }
+    else
+    {
+        ImpClearConnectMarker();
+    }
+}
+
+void SdrCreateView::HideConnectMarker()
+{
+    ImpClearConnectMarker();
+}
+
+bool SdrCreateView::MouseMove(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    if(CheckEdgeMode() && pWin)
+    {
+        SdrPageView* pPV = GetSdrPageView();
+
+        if(pPV)
+        {
+            // TODO: Change default hit tolerance at IsMarkedHit() some time!
+            Point aPos(pWin->PixelToLogic(rMEvt.GetPosPixel()));
+            bool bMarkHit=PickHandle(aPos)!=nullptr || IsMarkedObjHit(aPos);
+            SdrObjConnection aCon;
+            if (!bMarkHit) SdrEdgeObj::ImpFindConnector(aPos,*pPV,aCon,nullptr,pWin);
+            SetConnectMarker(aCon);
+        }
+    }
+    return SdrDragView::MouseMove(rMEvt,pWin);
+}
+
+bool SdrCreateView::IsTextTool() const
+{
+    return meEditMode==SdrViewEditMode::Create && nCurrentInvent==SdrInventor::Default && (nCurrentIdent==OBJ_TEXT || nCurrentIdent==OBJ_TITLETEXT || nCurrentIdent==OBJ_OUTLINETEXT);
+}
+
+bool SdrCreateView::IsEdgeTool() const
+{
+    return meEditMode==SdrViewEditMode::Create && nCurrentInvent==SdrInventor::Default && (nCurrentIdent==OBJ_EDGE);
+}
+
+bool SdrCreateView::IsMeasureTool() const
+{
+    return meEditMode==SdrViewEditMode::Create && nCurrentInvent==SdrInventor::Default && (nCurrentIdent==OBJ_MEASURE);
+}
+
+void SdrCreateView::SetCurrentObj(sal_uInt16 nIdent, SdrInventor nInvent)
+{
+    if (nCurrentInvent!=nInvent || nCurrentIdent!=nIdent)
+    {
+        nCurrentInvent=nInvent;
+        nCurrentIdent=nIdent;
+        SdrObject * pObj = (nIdent == OBJ_NONE) ? nullptr :
+            SdrObjFactory::MakeNewObject(
+                *GetModel(),
+                nInvent,
+                nIdent);
+
+        if(pObj)
+        {
+            // Using text tool, mouse cursor is usually I-Beam,
+            // crosshairs with tiny I-Beam appears only on MouseButtonDown.
+            if(IsTextTool())
+            {
+                // Here the correct pointer needs to be used
+                // if the default is set to vertical writing
+                aCurrentCreatePointer = PointerStyle::Text;
+            }
+            else
+                aCurrentCreatePointer = pObj->GetCreatePointer();
+
+            SdrObject::Free( pObj );
+        }
+        else
+        {
+            aCurrentCreatePointer = PointerStyle::Cross;
+        }
+    }
+
+    CheckEdgeMode();
+    ImpSetGlueVisible3(IsEdgeTool());
+}
+
+bool SdrCreateView::ImpBegCreateObj(SdrInventor nInvent, sal_uInt16 nIdent, const Point& rPnt, OutputDevice* pOut,
+    sal_Int16 nMinMov, const tools::Rectangle& rLogRect, SdrObject* pPreparedFactoryObject)
+{
+    bool bRet=false;
+    UnmarkAllObj();
+    BrkAction();
+
+    ImpClearConnectMarker();
+
+    pCreatePV = GetSdrPageView();
+
+    if (pCreatePV!=nullptr)
+    { // otherwise no side registered!
+        OUString aLay(maActualLayer);
+
+        if(nInvent == SdrInventor::Default && nIdent == OBJ_MEASURE && !maMeasureLayer.isEmpty())
+        {
+            aLay = maMeasureLayer;
+        }
+
+        SdrLayerID nLayer=pCreatePV->GetPage()->GetLayerAdmin().GetLayerID(aLay);
+        if (nLayer==SDRLAYER_NOTFOUND) nLayer = SdrLayerID(0);
+        if (!pCreatePV->GetLockedLayers().IsSet(nLayer) && pCreatePV->GetVisibleLayers().IsSet(nLayer))
+        {
+            if(pPreparedFactoryObject)
+            {
+                pCurrentCreate = pPreparedFactoryObject;
+            }
+            else
+            {
+                pCurrentCreate = SdrObjFactory::MakeNewObject(
+                    *mpModel,
+                    nInvent,
+                    nIdent);
+            }
+
+            Point aPnt(rPnt);
+            if (nCurrentInvent!=SdrInventor::Default || (nCurrentIdent!=sal_uInt16(OBJ_EDGE) &&
+                                            nCurrentIdent!=sal_uInt16(OBJ_FREELINE) &&
+                                            nCurrentIdent!=sal_uInt16(OBJ_FREEFILL) )) { // no snapping for Edge and Freehand
+                aPnt=GetSnapPos(aPnt,pCreatePV);
+            }
+            if (pCurrentCreate!=nullptr)
+            {
+                if (mpDefaultStyleSheet!=nullptr) pCurrentCreate->NbcSetStyleSheet(mpDefaultStyleSheet, false);
+
+                // SW uses a naked SdrObject for frame construction. Normally, such an
+                // object should not be created. Since it is possible to use it as a helper
+                // object (e.g. in letting the user define an area with the interactive
+                // construction) at least no items should be set at that object.
+                if(nInvent != SdrInventor::Default || nIdent != OBJ_NONE)
+                {
+                    pCurrentCreate->SetMergedItemSet(maDefaultAttr);
+                }
+
+                if (mpModel && dynamic_cast<const SdrCaptionObj *>(pCurrentCreate) != nullptr)
+                {
+                    SfxItemSet aSet(mpModel->GetItemPool());
+                    aSet.Put(XFillColorItem(OUString(),COL_WHITE)); // in case someone turns on Solid
+                    aSet.Put(XFillStyleItem(drawing::FillStyle_NONE));
+
+                    pCurrentCreate->SetMergedItemSet(aSet);
+                }
+                if (mpModel && nInvent==SdrInventor::Default && (nIdent==OBJ_TEXT ||
+                    nIdent==OBJ_TITLETEXT || nIdent==OBJ_OUTLINETEXT))
+                {
+                    // default for all text frames: no background, no border
+                    SfxItemSet aSet(mpModel->GetItemPool());
+                    aSet.Put(XFillColorItem(OUString(),COL_WHITE)); // in case someone turns on Solid
+                    aSet.Put(XFillStyleItem(drawing::FillStyle_NONE));
+                    aSet.Put(XLineColorItem(OUString(),COL_BLACK)); // in case someone turns on Solid
+                    aSet.Put(XLineStyleItem(drawing::LineStyle_NONE));
+
+                    pCurrentCreate->SetMergedItemSet(aSet);
+                }
+                if (!rLogRect.IsEmpty()) pCurrentCreate->NbcSetLogicRect(rLogRect);
+
+                // make sure drag start point is inside WorkArea
+                const tools::Rectangle& rWorkArea = GetWorkArea();
+
+                if(!rWorkArea.IsEmpty())
+                {
+                    if(aPnt.X() < rWorkArea.Left())
+                    {
+                        aPnt.setX( rWorkArea.Left() );
+                    }
+
+                    if(aPnt.X() > rWorkArea.Right())
+                    {
+                        aPnt.setX( rWorkArea.Right() );
+                    }
+
+                    if(aPnt.Y() < rWorkArea.Top())
+                    {
+                        aPnt.setY( rWorkArea.Top() );
+                    }
+
+                    if(aPnt.Y() > rWorkArea.Bottom())
+                    {
+                        aPnt.setY( rWorkArea.Bottom() );
+                    }
+                }
+
+                maDragStat.Reset(aPnt);
+                maDragStat.SetView(static_cast<SdrView*>(this));
+                maDragStat.SetPageView(pCreatePV);
+                maDragStat.SetMinMove(ImpGetMinMovLogic(nMinMov,pOut));
+                mpDragWin=pOut;
+                if (pCurrentCreate->BegCreate(maDragStat))
+                {
+                    ShowCreateObj(/*pOut,sal_True*/);
+                    bRet=true;
+                }
+                else
+                {
+                    SdrObject::Free( pCurrentCreate );
+                    pCurrentCreate=nullptr;
+                    pCreatePV=nullptr;
+                }
+            }
+        }
+    }
+    return bRet;
+}
+
+bool SdrCreateView::BegCreateObj(const Point& rPnt, OutputDevice* pOut, short nMinMov)
+{
+    return ImpBegCreateObj(nCurrentInvent,nCurrentIdent,rPnt,pOut,nMinMov,tools::Rectangle(), nullptr);
+}
+
+bool SdrCreateView::BegCreatePreparedObject(const Point& rPnt, sal_Int16 nMinMov, SdrObject* pPreparedFactoryObject)
+{
+    SdrInventor nInvent(nCurrentInvent);
+    sal_uInt16 nIdent(nCurrentIdent);
+
+    if(pPreparedFactoryObject)
+    {
+        nInvent = pPreparedFactoryObject->GetObjInventor();
+        nIdent = pPreparedFactoryObject->GetObjIdentifier();
+    }
+
+    return ImpBegCreateObj(nInvent, nIdent, rPnt, nullptr, nMinMov, tools::Rectangle(), pPreparedFactoryObject);
+}
+
+bool SdrCreateView::BegCreateCaptionObj(const Point& rPnt, const Size& rObjSiz,
+    OutputDevice* pOut, short nMinMov)
+{
+    return ImpBegCreateObj(SdrInventor::Default,OBJ_CAPTION,rPnt,pOut,nMinMov,
+        tools::Rectangle(rPnt,Size(rObjSiz.Width()+1,rObjSiz.Height()+1)), nullptr);
+}
+
+void SdrCreateView::MovCreateObj(const Point& rPnt)
+{
+    if (pCurrentCreate!=nullptr) {
+        Point aPnt(rPnt);
+        if (!maDragStat.IsNoSnap())
+        {
+            aPnt=GetSnapPos(aPnt,pCreatePV);
+        }
+        if (IsOrtho())
+        {
+            if (maDragStat.IsOrtho8Possible()) OrthoDistance8(maDragStat.GetPrev(),aPnt,IsBigOrtho());
+            else if (maDragStat.IsOrtho4Possible()) OrthoDistance4(maDragStat.GetPrev(),aPnt,IsBigOrtho());
+        }
+
+        // If the drag point was limited and Ortho is active, do
+        // the small ortho correction (reduction) -> last parameter to FALSE.
+        bool bDidLimit(ImpLimitToWorkArea(aPnt));
+        if(bDidLimit && IsOrtho())
+        {
+            if(maDragStat.IsOrtho8Possible())
+                OrthoDistance8(maDragStat.GetPrev(), aPnt, false);
+            else if(maDragStat.IsOrtho4Possible())
+                OrthoDistance4(maDragStat.GetPrev(), aPnt, false);
+        }
+
+        if (aPnt==maDragStat.GetNow()) return;
+        bool bIsMinMoved(maDragStat.IsMinMoved());
+        if (maDragStat.CheckMinMoved(aPnt))
+        {
+            if (!bIsMinMoved) maDragStat.NextPoint();
+            maDragStat.NextMove(aPnt);
+            pCurrentCreate->MovCreate(maDragStat);
+
+            // MovCreate changes the object, so use ActionChanged() on it
+            pCurrentCreate->ActionChanged();
+
+            // replace for DrawCreateObjDiff
+            HideCreateObj();
+            ShowCreateObj();
+        }
+    }
+}
+
+void SdrCreateView::SetupObjLayer(const SdrPageView* pPageView, const OUString& aActiveLayer, SdrObject* pObj)
+{
+    const SdrLayerAdmin& rAd = pPageView->GetPage()->GetLayerAdmin();
+    SdrLayerID nLayer(0);
+
+    // #i72535#
+    if(dynamic_cast<const FmFormObj*>( pObj) !=  nullptr)
+    {
+        // for FormControls, force to form layer
+        nLayer = rAd.GetLayerID(rAd.GetControlLayerName());
+    }
+    else
+    {
+        nLayer = rAd.GetLayerID(aActiveLayer);
+    }
+
+    if(SDRLAYER_NOTFOUND == nLayer)
+    {
+        nLayer = SdrLayerID(0);
+    }
+
+    pObj->SetLayer(nLayer);
+}
+
+bool SdrCreateView::EndCreateObj(SdrCreateCmd eCmd)
+{
+    bool bRet=false;
+    SdrObject* pObjCreated=pCurrentCreate;
+
+    if (pCurrentCreate!=nullptr)
+    {
+        sal_uInt32 nCount=maDragStat.GetPointCount();
+
+        if (nCount<=1 && eCmd==SdrCreateCmd::ForceEnd)
+        {
+            BrkCreateObj(); // objects with only a single point don't exist (at least today)
+            return false; // sal_False = event not interpreted
+        }
+
+        bool bPntsEq=nCount>1;
+        sal_uInt32 i=1;
+        Point aP0=maDragStat.GetPoint(0);
+        while (bPntsEq && i<nCount) { bPntsEq=aP0==maDragStat.GetPoint(i); i++; }
+
+        if (pCurrentCreate->EndCreate(maDragStat,eCmd))
+        {
+            HideCreateObj();
+
+            if (!bPntsEq)
+            {
+                // otherwise Brk, because all points are equal
+                SdrObject* pObj=pCurrentCreate;
+                pCurrentCreate=nullptr;
+
+                SetupObjLayer(pCreatePV, maActualLayer, pObj);
+
+                // recognize creation of a new 3D object inside a 3D scene
+                bool bSceneIntoScene(false);
+
+                E3dScene* pObjScene = dynamic_cast<E3dScene*>(pObjCreated);
+                E3dScene* pCurrentScene = pObjScene ? dynamic_cast<E3dScene*>(pCreatePV->GetCurrentGroup()) : nullptr;
+                if (pCurrentScene)
+                {
+                    bool bDidInsert = static_cast<E3dView*>(this)->ImpCloneAll3DObjectsToDestScene(
+                        pObjScene, pCurrentScene, Point(0, 0));
+
+                    if(bDidInsert)
+                    {
+                        // delete object, its content is cloned and inserted
+                        SdrObject::Free( pObjCreated );
+                        pObjCreated = nullptr;
+                        bSceneIntoScene = true;
+                    }
+                }
+
+                if(!bSceneIntoScene)
+                {
+                    // Here an interactively created SdrObject gets added, so
+                    // take into account that interaction created an object in
+                    // model coordinates. If we have e.g. a GirdOffset, this is a
+                    // little bit tricky - we have an object in model coordinates,
+                    // so the fetched offset is at the wrong point in principle
+                    // since we need to 'substract' the offset here to get to
+                    // 'real' model coordinates. But we have nothing better here,
+                    // so go for it.
+                    // The 2nd a little tricky thing is that this will early-create
+                    // a ViewObjectContact for the new SdrObject, but these VOCs
+                    // are anyways layouted for being create-on-demand. This will
+                    // be adapted/replaced correctly later on.
+                    // This *should* be the right place for getting all interactively
+                    // created objects, see InsertObjectAtView below that calls
+                    // CreateUndoNewObject.
+                    basegfx::B2DVector aGridOffset(0.0, 0.0);
+                    if(getPossibleGridOffsetForSdrObject(aGridOffset, pObj, pCreatePV))
+                    {
+                        const Size aOffset(
+                            basegfx::fround(-aGridOffset.getX()),
+                            basegfx::fround(-aGridOffset.getY()));
+
+                        pObj->NbcMove(aOffset);
+                    }
+
+                    // do the same as before
+                    InsertObjectAtView(pObj, *pCreatePV);
+                }
+
+                pCreatePV=nullptr;
+                bRet=true; // sal_True = event interpreted
+            }
+            else
+            {
+                BrkCreateObj();
+            }
+        }
+        else
+        { // more points
+            if (eCmd==SdrCreateCmd::ForceEnd || // nothing there -- force ending
+                nCount==0 ||                             // no existing points (should never happen)
+                (nCount<=1 && !maDragStat.IsMinMoved())) { // MinMove not met
+                BrkCreateObj();
+            }
+            else
+            {
+                // replace for DrawCreateObjDiff
+                HideCreateObj();
+                ShowCreateObj();
+                maDragStat.ResetMinMoved(); // NextPoint is at MovCreateObj()
+                bRet=true;
+            }
+        }
+    }
+    return bRet;
+}
+
+void SdrCreateView::BckCreateObj()
+{
+    if (pCurrentCreate!=nullptr)
+    {
+        if (maDragStat.GetPointCount()<=2 )
+        {
+            BrkCreateObj();
+        }
+        else
+        {
+            HideCreateObj();
+            maDragStat.PrevPoint();
+            if (pCurrentCreate->BckCreate(maDragStat))
+            {
+                ShowCreateObj();
+            }
+            else
+            {
+                BrkCreateObj();
+            }
+        }
+    }
+}
+
+void SdrCreateView::BrkCreateObj()
+{
+    if (pCurrentCreate!=nullptr)
+    {
+        HideCreateObj();
+        pCurrentCreate->BrkCreate(maDragStat);
+        SdrObject::Free( pCurrentCreate );
+        pCurrentCreate=nullptr;
+        pCreatePV=nullptr;
+    }
+}
+
+void SdrCreateView::ShowCreateObj(/*OutputDevice* pOut, sal_Bool bFull*/)
+{
+    if(IsCreateObj() && !maDragStat.IsShown())
+    {
+        if(pCurrentCreate)
+        {
+            // for migration from XOR, replace DrawDragObj here to create
+            // overlay objects instead.
+            bool bUseSolidDragging(IsSolidDragging());
+
+            // #i101648# check if dragged object is a naked SdrObject (not
+            // a derivation). This is e.g. used in SW Frame construction
+            // as placeholder. Do not use SolidDragging for naked SdrObjects,
+            // they cannot have a valid optical representation
+            if(bUseSolidDragging && OBJ_NONE == pCurrentCreate->GetObjIdentifier())
+            {
+                bUseSolidDragging = false;
+            }
+
+            // check for objects with no fill and no line
+            if(bUseSolidDragging)
+            {
+                const SfxItemSet& rSet = pCurrentCreate->GetMergedItemSet();
+                const drawing::FillStyle eFill(rSet.Get(XATTR_FILLSTYLE).GetValue());
+                const drawing::LineStyle eLine(rSet.Get(XATTR_LINESTYLE).GetValue());
+
+                if(drawing::LineStyle_NONE == eLine && drawing::FillStyle_NONE == eFill)
+                {
+                    bUseSolidDragging = false;
+                }
+            }
+
+            // check for form controls
+            if(bUseSolidDragging)
+            {
+                if(dynamic_cast<const SdrUnoObj*>( pCurrentCreate) !=  nullptr)
+                {
+                    bUseSolidDragging = false;
+                }
+            }
+
+              // #i101781# force to non-solid dragging when not creating a full circle
+            if(bUseSolidDragging)
+            {
+                SdrCircObj* pCircObj = dynamic_cast< SdrCircObj* >(pCurrentCreate);
+
+                if(pCircObj && OBJ_CIRC != pCircObj->GetObjIdentifier())
+                {
+                    // #i103058# Allow SolidDragging with four points
+                    if(maDragStat.GetPointCount() < 4)
+                    {
+                        bUseSolidDragging = false;
+                    }
+                }
+            }
+
+            if(bUseSolidDragging)
+            {
+                basegfx::B2DPolyPolygon aDragPolyPolygon;
+
+                if(dynamic_cast<const SdrRectObj*>( pCurrentCreate) !=  nullptr)
+                {
+                    // ensure object has some size, necessary for SdrTextObj because
+                    // there are still untested divisions by that sizes
+                    tools::Rectangle aCurrentSnapRect(pCurrentCreate->GetSnapRect());
+
+                    if(!(aCurrentSnapRect.GetWidth() > 1 && aCurrentSnapRect.GetHeight() > 1))
+                    {
+                        tools::Rectangle aNewRect(maDragStat.GetStart(), maDragStat.GetStart() + Point(2, 2));
+                        pCurrentCreate->NbcSetSnapRect(aNewRect);
+                    }
+                }
+
+                if(dynamic_cast<const SdrPathObj*>( pCurrentCreate) !=  nullptr)
+                {
+                    // The up-to-now created path needs to be set at the object to have something
+                    // that can be visualized
+                    SdrPathObj& rPathObj(static_cast<SdrPathObj&>(*pCurrentCreate));
+                    const basegfx::B2DPolyPolygon aCurrentPolyPolygon(rPathObj.getObjectPolyPolygon(maDragStat));
+
+                    if(aCurrentPolyPolygon.count())
+                    {
+                        rPathObj.NbcSetPathPoly(aCurrentPolyPolygon);
+                    }
+
+                    aDragPolyPolygon = rPathObj.getDragPolyPolygon(maDragStat);
+                }
+
+                // use the SdrObject directly for overlay
+                mpCreateViewExtraData->CreateAndShowOverlay(*this, pCurrentCreate, aDragPolyPolygon);
+            }
+            else
+            {
+                const ::basegfx::B2DPolyPolygon aPoly(pCurrentCreate->TakeCreatePoly(maDragStat));
+
+                mpCreateViewExtraData->CreateAndShowOverlay(*this, nullptr, aPoly);
+            }
+
+            // #i101679# Force changed overlay to be shown
+            for(sal_uInt32 a(0); a < PaintWindowCount(); a++)
+            {
+                SdrPaintWindow* pCandidate = GetPaintWindow(a);
+                const rtl::Reference<sdr::overlay::OverlayManager>& xOverlayManager = pCandidate->GetOverlayManager();
+
+                if (xOverlayManager.is())
+                {
+                    xOverlayManager->flush();
+                }
+            }
+        }
+
+        maDragStat.SetShown(true);
+    }
+}
+
+void SdrCreateView::HideCreateObj()
+{
+    if(IsCreateObj() && maDragStat.IsShown())
+    {
+        // for migration from XOR, replace DrawDragObj here to create
+        // overlay objects instead.
+        mpCreateViewExtraData->HideOverlay();
+
+        //DrawCreateObj(pOut,bFull);
+        maDragStat.SetShown(false);
+    }
+}
+
+
+void SdrCreateView::GetAttributes(SfxItemSet& rTargetSet, bool bOnlyHardAttr) const
+{
+    if(pCurrentCreate)
+    {
+        rTargetSet.Put(pCurrentCreate->GetMergedItemSet());
+    }
+    else
+    {
+        SdrDragView::GetAttributes(rTargetSet, bOnlyHardAttr);
+    }
+}
+
+bool SdrCreateView::SetAttributes(const SfxItemSet& rSet, bool bReplaceAll)
+{
+    if(pCurrentCreate)
+    {
+        pCurrentCreate->SetMergedItemSetAndBroadcast(rSet, bReplaceAll);
+
+        return true;
+    }
+    else
+    {
+        return SdrDragView::SetAttributes(rSet,bReplaceAll);
+    }
+}
+
+SfxStyleSheet* SdrCreateView::GetStyleSheet() const
+{
+    if (pCurrentCreate!=nullptr)
+    {
+        return pCurrentCreate->GetStyleSheet();
+    }
+    else
+    {
+        return SdrDragView::GetStyleSheet();
+    }
+}
+
+void SdrCreateView::SetStyleSheet(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    if (pCurrentCreate!=nullptr)
+    {
+        pCurrentCreate->SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
+    }
+    else
+    {
+        SdrDragView::SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svddrag.cxx b/svx/source/svdraw/svddrag.cxx
new file mode 100644
index 000000000..381a8def5
--- /dev/null
+++ b/svx/source/svdraw/svddrag.cxx
@@ -0,0 +1,129 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdview.hxx>
+#include <svx/svddrag.hxx>
+
+SdrDragStatUserData::~SdrDragStatUserData() = default;
+
+SdrDragStat::~SdrDragStat()
+{
+}
+
+void SdrDragStat::Clear()
+{
+    mpUserData.reset();
+    mvPnts.clear();
+    mvPnts.emplace_back();
+}
+
+void SdrDragStat::Reset()
+{
+    pView=nullptr;
+    pPageView=nullptr;
+    bShown=false;
+    nMinMov=1;
+    bMinMoved=false;
+    bHorFixed=false;
+    bVerFixed=false;
+    bWantNoSnap=false;
+    pHdl=nullptr;
+    bOrtho4=false;
+    bOrtho8=false;
+    pDragMethod=nullptr;
+    bEndDragChangesAttributes=false;
+    bEndDragChangesGeoAndAttributes=false;
+    mbEndDragChangesLayout=false;
+    bMouseIsUp=false;
+    Clear();
+    aActionRect=tools::Rectangle();
+}
+
+void SdrDragStat::Reset(const Point& rPnt)
+{
+    Reset();
+    mvPnts[0]=rPnt;
+    aPos0=rPnt;
+    aRealNow=rPnt;
+}
+
+void SdrDragStat::NextMove(const Point& rPnt)
+{
+    aPos0=mvPnts.back();
+    aRealNow=rPnt;
+    mvPnts.back()=rPnt;
+}
+
+void SdrDragStat::NextPoint()
+{
+    mvPnts.emplace_back(aRealNow);
+}
+
+void SdrDragStat::PrevPoint()
+{
+    if (mvPnts.size()>1) { // one has to remain at all times
+        mvPnts.erase(mvPnts.begin()+mvPnts.size()-2);
+        mvPnts.back() = aRealNow;
+    }
+}
+
+bool SdrDragStat::CheckMinMoved(const Point& rPnt)
+{
+    if (!bMinMoved) {
+        long dx=rPnt.X()-GetPrev().X(); if (dx<0) dx=-dx;
+        long dy=rPnt.Y()-GetPrev().Y(); if (dy<0) dy=-dy;
+        if (dx>=long(nMinMov) || dy>=long(nMinMov))
+            bMinMoved=true;
+    }
+    return bMinMoved;
+}
+
+Fraction SdrDragStat::GetXFact() const
+{
+    long nMul=mvPnts.back().X()-aRef1.X();
+    long nDiv=GetPrev().X()-aRef1.X();
+    if (nDiv==0) nDiv=1;
+    if (bHorFixed) { nMul=1; nDiv=1; }
+    return Fraction(nMul,nDiv);
+}
+
+Fraction SdrDragStat::GetYFact() const
+{
+    long nMul=mvPnts.back().Y()-aRef1.Y();
+    long nDiv=GetPrev().Y()-aRef1.Y();
+    if (nDiv==0) nDiv=1;
+    if (bVerFixed) { nMul=1; nDiv=1; }
+    return Fraction(nMul,nDiv);
+}
+
+void SdrDragStat::TakeCreateRect(tools::Rectangle& rRect) const
+{
+    rRect=tools::Rectangle(mvPnts[0], mvPnts.back());
+    if (mvPnts.size()>1) {
+        Point aBtmRgt(mvPnts[1]);
+        rRect.SetRight(aBtmRgt.X() );
+        rRect.SetBottom(aBtmRgt.Y() );
+    }
+    if (pView!=nullptr && pView->IsCreate1stPointAsCenter()) {
+        rRect.AdjustTop(rRect.Top()-rRect.Bottom() );
+        rRect.AdjustLeft(rRect.Left()-rRect.Right() );
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svddrgm1.hxx b/svx/source/svdraw/svddrgm1.hxx
new file mode 100644
index 000000000..8a0fcca1a
--- /dev/null
+++ b/svx/source/svdraw/svddrgm1.hxx
@@ -0,0 +1,232 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_SVX_SOURCE_SVDRAW_SVDDRGM1_HXX
+#define INCLUDED_SVX_SOURCE_SVDRAW_SVDDRGM1_HXX
+
+#include <svx/xpoly.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/svddrgv.hxx>
+#include <svx/svddrgmt.hxx>
+
+class SdrDragView;
+
+class SdrDragMovHdl : public SdrDragMethod
+{
+protected:
+    // define nothing, override to do so
+    virtual void createSdrDragEntries() override;
+
+public:
+    explicit SdrDragMovHdl(SdrDragView& rNewView);
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual void MoveSdrDrag(const Point& rPnt) override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual void CancelSdrDrag() override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+};
+
+class SdrDragRotate : public SdrDragMethod
+{
+private:
+    double                      nSin;
+    double                      nCos;
+    long                        nAngle0;
+    long                        nAngle;
+    bool                        bRight;
+
+public:
+    explicit SdrDragRotate(SdrDragView& rNewView);
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual void MoveSdrDrag(const Point& rPnt) override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+
+    virtual basegfx::B2DHomMatrix getCurrentTransformation() override;
+    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget) override;
+};
+
+class SdrDragShear : public SdrDragMethod
+{
+private:
+    Fraction                    aFact;
+    long                        nAngle0;
+    long                        nAngle;
+    double                      nTan;
+    bool                        bVertical;   // contort vertically
+    bool                        bResize;     // shear and resize
+    bool                        bUpSideDown; // mirror and shear/slant
+    bool                        bSlant;
+
+public:
+    SdrDragShear(SdrDragView& rNewView,bool bSlant1);
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual void MoveSdrDrag(const Point& rPnt) override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+
+    virtual basegfx::B2DHomMatrix getCurrentTransformation() override;
+    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget) override;
+};
+
+class SdrDragMirror : public SdrDragMethod
+{
+private:
+    Point                       aDif;
+    long                        nAngle;
+    bool                        bMirrored;
+    bool                        bSide0;
+
+    bool ImpCheckSide(const Point& rPnt) const;
+
+public:
+    explicit SdrDragMirror(SdrDragView& rNewView);
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual void MoveSdrDrag(const Point& rPnt) override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+
+    virtual basegfx::B2DHomMatrix getCurrentTransformation() override;
+    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget) override;
+};
+
+class SdrDragGradient : public SdrDragMethod
+{
+private:
+    // Handles to work on
+    SdrHdlGradient*             pIAOHandle;
+
+    // is this for gradient (or for transparency)?
+    bool                        bIsGradient : 1;
+
+public:
+    SdrDragGradient(SdrDragView& rNewView, bool bGrad = true);
+
+    bool IsGradient() const { return bIsGradient; }
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual void MoveSdrDrag(const Point& rPnt) override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+    virtual void CancelSdrDrag() override;
+};
+
+class SdrDragCrook : public SdrDragMethod
+{
+private:
+    tools::Rectangle                   aMarkRect;
+    Point                       aMarkCenter;
+    Point                       aCenter;
+    Point                       aStart;
+    Fraction                    aFact;
+    Point                       aRad;
+    bool                        bContortionAllowed;
+    bool                        bNoContortionAllowed;
+    bool                        bContortion;
+    bool                        bResizeAllowed;
+    bool                        bResize;
+    bool                        bRotateAllowed;
+    bool                        bRotate;
+    bool                        bVertical;
+    bool                        bValid;
+    bool                        bLft;
+    bool                        bRgt;
+    bool                        bUpr;
+    bool                        bLwr;
+    bool                        bAtCenter;
+    long                        nAngle;
+    long                        nMarkSize;
+    SdrCrookMode                eMode;
+
+    // helpers for applyCurrentTransformationToPolyPolygon
+    void MovAllPoints(basegfx::B2DPolyPolygon& rTarget);
+    void MovCrookPoint(Point& rPnt, Point* pC1, Point* pC2);
+
+protected:
+    // needs to add drag geometry to the default
+    virtual void createSdrDragEntries() override;
+
+public:
+    explicit SdrDragCrook(SdrDragView& rNewView);
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual void MoveSdrDrag(const Point& rPnt) override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+
+    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget) override;
+    virtual void applyCurrentTransformationToPolyPolygon(basegfx::B2DPolyPolygon& rTarget) override;
+};
+
+class SdrDragDistort : public SdrDragMethod
+{
+private:
+    tools::Rectangle                   aMarkRect;
+    XPolygon                    aDistortedRect;
+    sal_uInt16                  nPolyPt;
+    bool                        bContortionAllowed;
+    bool                        bNoContortionAllowed;
+    bool                        bContortion;
+
+    // helper for applyCurrentTransformationToPolyPolygon
+    void MovAllPoints(basegfx::B2DPolyPolygon& rTarget);
+
+protected:
+    // needs to add drag geometry to the default
+    virtual void createSdrDragEntries() override;
+
+public:
+    explicit SdrDragDistort(SdrDragView& rNewView);
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual void MoveSdrDrag(const Point& rPnt) override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+
+    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget) override;
+    virtual void applyCurrentTransformationToPolyPolygon(basegfx::B2DPolyPolygon& rTarget) override;
+};
+
+// derive from SdrDragObjOwn to have handles aligned to object when it
+// is sheared or rotated
+class SdrDragCrop : public SdrDragObjOwn
+{
+public:
+    explicit SdrDragCrop(SdrDragView& rNewView);
+
+    virtual OUString GetSdrDragComment() const override;
+    virtual bool BeginSdrDrag() override;
+    virtual bool EndSdrDrag(bool bCopy) override;
+    virtual PointerStyle GetSdrDragPointer() const override;
+};
+
+#endif // INCLUDED_SVX_SOURCE_SVDRAW_SVDDRGM1_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svddrgmt.cxx b/svx/source/svdraw/svddrgmt.cxx
new file mode 100644
index 000000000..53a1f072e
--- /dev/null
+++ b/svx/source/svdraw/svddrgmt.cxx
@@ -0,0 +1,3862 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include "svddrgm1.hxx"
+#include <math.h>
+
+#include <o3tl/numeric.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/settings.hxx>
+#include <vcl/ptrstyle.hxx>
+#include <svx/xpoly.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdmark.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svddrgv.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/sdgcpitm.hxx>
+#include <svx/sdooitm.hxx>
+#include <svx/sdtagitm.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <sdr/overlay/overlayrollingrectangle.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <svx/sdr/overlay/overlayprimitive2dsequenceobject.hxx>
+#include <drawinglayer/primitive2d/unifiedtransparenceprimitive2d.hxx>
+#include <svx/sdr/contact/objectcontact.hxx>
+#include <svx/svditer.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/polypolygoneditor.hxx>
+#include <drawinglayer/primitive2d/PolyPolygonSelectionPrimitive2D.hxx>
+#include <drawinglayer/primitive2d/PolyPolygonMarkerPrimitive2D.hxx>
+#include <drawinglayer/primitive2d/polygonprimitive2d.hxx>
+#include <drawinglayer/primitive2d/transformprimitive2d.hxx>
+#include <drawinglayer/primitive2d/markerarrayprimitive2d.hxx>
+#include <sdr/primitive2d/sdrattributecreator.hxx>
+#include <sdr/primitive2d/sdrdecompositiontools.hxx>
+#include <sdr/primitive2d/sdrprimitivetools.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <drawinglayer/attribute/sdrlineattribute.hxx>
+#include <drawinglayer/attribute/sdrlinestartendattribute.hxx>
+#include <svl/itempool.hxx>
+#include <comphelper/lok.hxx>
+#include <map>
+#include <vector>
+
+
+SdrDragEntry::SdrDragEntry()
+:   mbAddToTransparent(false)
+{
+}
+
+SdrDragEntry::~SdrDragEntry()
+{
+}
+
+
+SdrDragEntryPolyPolygon::SdrDragEntryPolyPolygon(const basegfx::B2DPolyPolygon& rOriginalPolyPolygon)
+:   SdrDragEntry(),
+    maOriginalPolyPolygon(rOriginalPolyPolygon)
+{
+}
+
+SdrDragEntryPolyPolygon::~SdrDragEntryPolyPolygon()
+{
+}
+
+drawinglayer::primitive2d::Primitive2DContainer SdrDragEntryPolyPolygon::createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod)
+{
+    drawinglayer::primitive2d::Primitive2DContainer aRetval;
+
+    if(maOriginalPolyPolygon.count())
+    {
+        basegfx::B2DPolyPolygon aCopy(maOriginalPolyPolygon);
+        const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+
+        rDragMethod.applyCurrentTransformationToPolyPolygon(aCopy);
+        basegfx::BColor aColA(aSvtOptionsDrawinglayer.GetStripeColorA().getBColor());
+        basegfx::BColor aColB(aSvtOptionsDrawinglayer.GetStripeColorB().getBColor());
+        const double fStripeLength(aSvtOptionsDrawinglayer.GetStripeLength());
+
+        if(Application::GetSettings().GetStyleSettings().GetHighContrastMode())
+        {
+            aColA = aColB = Application::GetSettings().GetStyleSettings().GetHighlightColor().getBColor();
+            aColB.invert();
+        }
+
+        aRetval.resize(2);
+        aRetval[0] = new drawinglayer::primitive2d::PolyPolygonMarkerPrimitive2D(
+            aCopy,
+            aColA,
+            aColB,
+            fStripeLength);
+
+        const basegfx::BColor aHilightColor(aSvtOptionsDrawinglayer.getHilightColor().getBColor());
+        const double fTransparence(aSvtOptionsDrawinglayer.GetTransparentSelectionPercent() * 0.01);
+
+        aRetval[1] = new drawinglayer::primitive2d::PolyPolygonSelectionPrimitive2D(
+            aCopy,
+            aHilightColor,
+            fTransparence,
+            3.0,
+            false);
+    }
+
+    return aRetval;
+}
+
+
+SdrDragEntrySdrObject::SdrDragEntrySdrObject(
+    const SdrObject& rOriginal,
+    bool bModify)
+:   SdrDragEntry(),
+    maOriginal(rOriginal),
+    mbModify(bModify)
+{
+    // add SdrObject parts to transparent overlay stuff
+    setAddToTransparent(true);
+}
+
+SdrDragEntrySdrObject::~SdrDragEntrySdrObject()
+{
+}
+
+void SdrDragEntrySdrObject::prepareCurrentState(SdrDragMethod& rDragMethod)
+{
+    // for the moment, i need to re-create the clone in all cases. I need to figure
+    // out when clone and original have the same class, so that i can use operator=
+    // in those cases
+
+    mxClone.reset();
+
+    if(mbModify)
+    {
+        mxClone = maOriginal.getFullDragClone();
+
+        // apply original transformation, implemented at the DragMethods
+        rDragMethod.applyCurrentTransformationToSdrObject(*mxClone);
+    }
+}
+
+drawinglayer::primitive2d::Primitive2DContainer SdrDragEntrySdrObject::createPrimitive2DSequenceInCurrentState(SdrDragMethod&)
+{
+    const SdrObject* pSource = &maOriginal;
+
+    if(mbModify && mxClone)
+    {
+        // choose source for geometry data
+        pSource = mxClone.get();
+    }
+
+    // use the view-independent primitive representation (without
+    // evtl. GridOffset, that may be applied to the DragEntry individually)
+    return pSource->GetViewContact().getViewIndependentPrimitive2DContainer();
+}
+
+
+SdrDragEntryPrimitive2DSequence::SdrDragEntryPrimitive2DSequence(
+    const drawinglayer::primitive2d::Primitive2DContainer& rSequence)
+:   SdrDragEntry(),
+    maPrimitive2DSequence(rSequence)
+{
+    // add parts to transparent overlay stuff if necessary
+    setAddToTransparent(true);
+}
+
+SdrDragEntryPrimitive2DSequence::~SdrDragEntryPrimitive2DSequence()
+{
+}
+
+drawinglayer::primitive2d::Primitive2DContainer SdrDragEntryPrimitive2DSequence::createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod)
+{
+    drawinglayer::primitive2d::Primitive2DReference aTransformPrimitive2D(
+        new drawinglayer::primitive2d::TransformPrimitive2D(
+            rDragMethod.getCurrentTransformation(),
+            maPrimitive2DSequence));
+
+    return drawinglayer::primitive2d::Primitive2DContainer { aTransformPrimitive2D };
+}
+
+
+SdrDragEntryPointGlueDrag::SdrDragEntryPointGlueDrag(const std::vector< basegfx::B2DPoint >& rPositions, bool bIsPointDrag)
+:   maPositions(rPositions),
+    mbIsPointDrag(bIsPointDrag)
+{
+    // add SdrObject parts to transparent overlay stuff
+    setAddToTransparent(true);
+}
+
+SdrDragEntryPointGlueDrag::~SdrDragEntryPointGlueDrag()
+{
+}
+
+drawinglayer::primitive2d::Primitive2DContainer SdrDragEntryPointGlueDrag::createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod)
+{
+    drawinglayer::primitive2d::Primitive2DContainer aRetval;
+
+    if(!maPositions.empty())
+    {
+        basegfx::B2DPolygon aPolygon;
+
+        for(auto const & a: maPositions)
+        {
+            aPolygon.append(a);
+        }
+
+        basegfx::B2DPolyPolygon aPolyPolygon(aPolygon);
+
+        rDragMethod.applyCurrentTransformationToPolyPolygon(aPolyPolygon);
+
+        const basegfx::B2DPolygon aTransformed(aPolyPolygon.getB2DPolygon(0));
+        std::vector< basegfx::B2DPoint > aTransformedPositions;
+
+        aTransformedPositions.reserve(aTransformed.count());
+
+        for(sal_uInt32 a = 0; a < aTransformed.count(); a++)
+        {
+            aTransformedPositions.push_back(aTransformed.getB2DPoint(a));
+        }
+
+        if(mbIsPointDrag)
+        {
+            const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+            basegfx::BColor aColor(aSvtOptionsDrawinglayer.GetStripeColorA().getBColor());
+
+            if(Application::GetSettings().GetStyleSettings().GetHighContrastMode())
+            {
+                aColor = Application::GetSettings().GetStyleSettings().GetHighlightColor().getBColor();
+            }
+
+            drawinglayer::primitive2d::Primitive2DReference aMarkerArrayPrimitive2D(
+                new drawinglayer::primitive2d::MarkerArrayPrimitive2D(aTransformedPositions,
+                    drawinglayer::primitive2d::createDefaultCross_3x3(aColor)));
+
+            aRetval = drawinglayer::primitive2d::Primitive2DContainer { aMarkerArrayPrimitive2D };
+        }
+        else
+        {
+            drawinglayer::primitive2d::Primitive2DReference aMarkerArrayPrimitive2D(
+                new drawinglayer::primitive2d::MarkerArrayPrimitive2D(aTransformedPositions,
+                                                                      SdrHdl::createGluePointBitmap()));
+            aRetval = drawinglayer::primitive2d::Primitive2DContainer { aMarkerArrayPrimitive2D };
+        }
+    }
+
+    return aRetval;
+}
+
+
+void SdrDragMethod::resetSdrDragEntries()
+{
+    // clear entries; creation is on demand
+    clearSdrDragEntries();
+}
+
+basegfx::B2DRange SdrDragMethod::getCurrentRange() const
+{
+    return maOverlayObjectList.getBaseRange();
+}
+
+void SdrDragMethod::clearSdrDragEntries()
+{
+    maSdrDragEntries.clear();
+}
+
+void SdrDragMethod::addSdrDragEntry(std::unique_ptr<SdrDragEntry> pNew)
+{
+    assert(pNew);
+    maSdrDragEntries.push_back(std::move(pNew));
+}
+
+void SdrDragMethod::createSdrDragEntries()
+{
+    if(getSdrDragView().GetSdrPageView() && getSdrDragView().GetSdrPageView()->HasMarkedObjPageView())
+    {
+        if(getSdrDragView().IsDraggingPoints())
+        {
+            createSdrDragEntries_PointDrag();
+        }
+        else if(getSdrDragView().IsDraggingGluePoints())
+        {
+            createSdrDragEntries_GlueDrag();
+        }
+        else
+        {
+            if(getSolidDraggingActive())
+            {
+                createSdrDragEntries_SolidDrag();
+            }
+            else
+            {
+                createSdrDragEntries_PolygonDrag();
+            }
+        }
+    }
+}
+
+void SdrDragMethod::createSdrDragEntryForSdrObject(const SdrObject& rOriginal)
+{
+    // add full object drag; Clone() at the object has to work
+    // for this
+    addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntrySdrObject(rOriginal, true/*bModify*/)));
+}
+
+void SdrDragMethod::insertNewlyCreatedOverlayObjectForSdrDragMethod(
+    std::unique_ptr<sdr::overlay::OverlayObject> pOverlayObject,
+    const sdr::contact::ObjectContact& rObjectContact,
+    sdr::overlay::OverlayManager& rOverlayManager)
+{
+    // check if we have an OverlayObject
+    if(!pOverlayObject)
+    {
+        return;
+    }
+
+    // add to OverlayManager
+    rOverlayManager.add(*pOverlayObject);
+
+    // Add GridOffset for non-linear ViewToDevice transformation (calc)
+    if(rObjectContact.supportsGridOffsets())
+    {
+        const basegfx::B2DRange& rNewRange(pOverlayObject->getBaseRange());
+
+        if(!rNewRange.isEmpty())
+        {
+            basegfx::B2DVector aOffset(0.0, 0.0);
+            rObjectContact.calculateGridOffsetForB2DRange(aOffset, rNewRange);
+
+            if(!aOffset.equalZero())
+            {
+                pOverlayObject->setOffset(aOffset);
+            }
+        }
+    }
+
+    // add to local OverlayObjectList - ownership change (!)
+    maOverlayObjectList.append(std::move(pOverlayObject));
+}
+
+void SdrDragMethod::createSdrDragEntries_SolidDrag()
+{
+    const size_t nMarkCount(getSdrDragView().GetMarkedObjectCount());
+    SdrPageView* pPV = getSdrDragView().GetSdrPageView();
+
+    if(pPV)
+    {
+        for(size_t a = 0; a < nMarkCount; ++a)
+        {
+            SdrMark* pM = getSdrDragView().GetSdrMarkByIndex(a);
+
+            if(pM->GetPageView() == pPV)
+            {
+                const SdrObject* pObject = pM->GetMarkedSdrObj();
+
+                if(pObject)
+                {
+                    if(pPV->PageWindowCount())
+                    {
+                        SdrObjListIter aIter(*pObject);
+
+                        while(aIter.IsMore())
+                        {
+                            SdrObject* pCandidate = aIter.Next();
+
+                            if(pCandidate)
+                            {
+                                const bool bSuppressFullDrag(!pCandidate->supportsFullDrag());
+                                bool bAddWireframe(bSuppressFullDrag);
+
+                                if(!bAddWireframe && !pCandidate->HasLineStyle())
+                                {
+                                    // add wireframe for objects without outline
+                                    bAddWireframe = true;
+                                }
+
+                                if(!bSuppressFullDrag)
+                                {
+                                    // add full object drag; Clone() at the object has to work
+                                    // for this
+                                    createSdrDragEntryForSdrObject(*pCandidate);
+                                }
+
+                                if(bAddWireframe)
+                                {
+                                    // when dragging a 50% transparent copy of a filled or not filled object without
+                                    // outline, this is normally hard to see. Add extra wireframe in that case. This
+                                    // works nice e.g. with text frames etc.
+                                    addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntryPolyPolygon(pCandidate->TakeXorPoly())));
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+void SdrDragMethod::createSdrDragEntries_PolygonDrag()
+{
+    const size_t nMarkCount(getSdrDragView().GetMarkedObjectCount());
+    bool bNoPolygons(getSdrDragView().IsNoDragXorPolys() || nMarkCount > SdrDragView::GetDragXorPolyLimit());
+    basegfx::B2DPolyPolygon aResult;
+    sal_uInt32 nPointCount(0);
+
+    for(size_t a = 0; !bNoPolygons && a < nMarkCount; ++a)
+    {
+        SdrMark* pM = getSdrDragView().GetSdrMarkByIndex(a);
+
+        if(pM->GetPageView() == getSdrDragView().GetSdrPageView())
+        {
+            const basegfx::B2DPolyPolygon aNewPolyPolygon(pM->GetMarkedSdrObj()->TakeXorPoly());
+
+            for(auto const& rPolygon : aNewPolyPolygon)
+            {
+                nPointCount += rPolygon.count();
+            }
+
+            if(nPointCount > SdrDragView::GetDragXorPointLimit())
+            {
+                bNoPolygons = true;
+            }
+
+            if(!bNoPolygons)
+            {
+                aResult.append(aNewPolyPolygon);
+            }
+        }
+    }
+
+    if(bNoPolygons)
+    {
+        const tools::Rectangle aR(getSdrDragView().GetSdrPageView()->MarkSnap());
+        const basegfx::B2DRange aNewRectangle = vcl::unotools::b2DRectangleFromRectangle(aR);
+        basegfx::B2DPolygon aNewPolygon(basegfx::utils::createPolygonFromRect(aNewRectangle));
+
+        aResult = basegfx::B2DPolyPolygon(basegfx::utils::expandToCurve(aNewPolygon));
+    }
+
+    if(aResult.count())
+    {
+        addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntryPolyPolygon(aResult)));
+    }
+}
+
+void SdrDragMethod::createSdrDragEntries_PointDrag()
+{
+    const size_t nMarkCount(getSdrDragView().GetMarkedObjectCount());
+    std::vector< basegfx::B2DPoint > aPositions;
+
+    for(size_t nm = 0; nm < nMarkCount; ++nm)
+    {
+        SdrMark* pM = getSdrDragView().GetSdrMarkByIndex(nm);
+
+        if(pM->GetPageView() == getSdrDragView().GetSdrPageView())
+        {
+            const SdrUShortCont& rPts = pM->GetMarkedPoints();
+
+            if (!rPts.empty())
+            {
+                const SdrObject* pObj = pM->GetMarkedSdrObj();
+                const SdrPathObj* pPath = dynamic_cast< const SdrPathObj* >(pObj);
+
+                if(pPath)
+                {
+                    const basegfx::B2DPolyPolygon& aPathXPP = pPath->GetPathPoly();
+
+                    if(aPathXPP.count())
+                    {
+                        for(const sal_uInt16 nObjPt : rPts)
+                        {
+                            sal_uInt32 nPolyNum, nPointNum;
+
+                            if(sdr::PolyPolygonEditor::GetRelativePolyPoint(aPathXPP, nObjPt, nPolyNum, nPointNum))
+                            {
+                                aPositions.push_back(aPathXPP.getB2DPolygon(nPolyNum).getB2DPoint(nPointNum));
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    if(!aPositions.empty())
+    {
+        addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntryPointGlueDrag(aPositions, true)));
+    }
+}
+
+void SdrDragMethod::createSdrDragEntries_GlueDrag()
+{
+    const size_t nMarkCount(getSdrDragView().GetMarkedObjectCount());
+    std::vector< basegfx::B2DPoint > aPositions;
+
+    for(size_t nm = 0; nm < nMarkCount; ++nm)
+    {
+        SdrMark* pM = getSdrDragView().GetSdrMarkByIndex(nm);
+
+        if(pM->GetPageView() == getSdrDragView().GetSdrPageView())
+        {
+            const SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+
+            if (!rPts.empty())
+            {
+                const SdrObject* pObj = pM->GetMarkedSdrObj();
+                const SdrGluePointList* pGPL = pObj->GetGluePointList();
+
+                if (pGPL)
+                {
+                    for(const sal_uInt16 nObjPt : rPts)
+                    {
+                        const sal_uInt16 nGlueNum(pGPL->FindGluePoint(nObjPt));
+
+                        if(SDRGLUEPOINT_NOTFOUND != nGlueNum)
+                        {
+                            const Point aPoint((*pGPL)[nGlueNum].GetAbsolutePos(*pObj));
+                            aPositions.emplace_back(aPoint.X(), aPoint.Y());
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    if(!aPositions.empty())
+    {
+        addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntryPointGlueDrag(aPositions, false)));
+    }
+}
+
+OUString SdrDragMethod::ImpGetDescriptionStr(const char* pStrCacheID) const
+{
+    ImpGetDescriptionOptions nOpt=ImpGetDescriptionOptions::NONE;
+    if (IsDraggingPoints()) {
+        nOpt=ImpGetDescriptionOptions::POINTS;
+    } else if (IsDraggingGluePoints()) {
+        nOpt=ImpGetDescriptionOptions::GLUEPOINTS;
+    }
+    return getSdrDragView().ImpGetDescriptionString(pStrCacheID, nOpt);
+}
+
+SdrObject* SdrDragMethod::GetDragObj() const
+{
+    SdrObject* pObj=nullptr;
+    if (getSdrDragView().mpDragHdl!=nullptr) pObj=getSdrDragView().mpDragHdl->GetObj();
+    if (pObj==nullptr) pObj=getSdrDragView().mpMarkedObj;
+    return pObj;
+}
+
+SdrPageView* SdrDragMethod::GetDragPV() const
+{
+    SdrPageView* pPV=nullptr;
+    if (getSdrDragView().mpDragHdl!=nullptr) pPV=getSdrDragView().mpDragHdl->GetPageView();
+    if (pPV==nullptr) pPV=getSdrDragView().mpMarkedPV;
+    return pPV;
+}
+
+void SdrDragMethod::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    // the original applies the transformation using TRGetBaseGeometry/TRSetBaseGeometry.
+    // Later this should be the only needed one for linear transforms (not for SdrDragCrook and
+    // SdrDragDistort, those are NOT linear). Currently, this can not yet be used since the
+    // special handling of rotate/mirror due to the not-being-able to handle it in the old
+    // drawinglayer stuff. Text would currently not correctly be mirrored in the preview.
+    basegfx::B2DHomMatrix aObjectTransform;
+    basegfx::B2DPolyPolygon aObjectPolyPolygon;
+    bool bPolyUsed(rTarget.TRGetBaseGeometry(aObjectTransform, aObjectPolyPolygon));
+
+    // apply transform to object transform
+    aObjectTransform *= getCurrentTransformation();
+
+    if(bPolyUsed)
+    {
+        // do something special since the object size is in the polygon
+        // break up matrix to get the scale
+        const basegfx::utils::B2DHomMatrixBufferedDecompose aTmpDecomp(aObjectTransform);
+
+        // get polygon's position and size
+        const basegfx::B2DRange aPolyRange(aObjectPolyPolygon.getB2DRange());
+
+        // get the scaling factors (do not mirror, this is in the object transformation)
+        const double fScaleX(fabs(aTmpDecomp.getScale().getX()) / (basegfx::fTools::equalZero(aPolyRange.getWidth()) ? 1.0 : aPolyRange.getWidth()));
+        const double fScaleY(fabs(aTmpDecomp.getScale().getY()) / (basegfx::fTools::equalZero(aPolyRange.getHeight()) ? 1.0 : aPolyRange.getHeight()));
+
+        // prepare transform matrix for polygon
+        basegfx::B2DHomMatrix aPolyTransform(
+            basegfx::utils::createTranslateB2DHomMatrix(
+                -aPolyRange.getMinX(),
+                -aPolyRange.getMinY()));
+        aPolyTransform.scale(fScaleX, fScaleY);
+
+        // transform the polygon
+        aObjectPolyPolygon.transform(aPolyTransform);
+    }
+
+    rTarget.TRSetBaseGeometry(getCurrentTransformation() * aObjectTransform, aObjectPolyPolygon);
+}
+
+void SdrDragMethod::applyCurrentTransformationToPolyPolygon(basegfx::B2DPolyPolygon& rTarget)
+{
+    // original uses CurrentTransformation
+    rTarget.transform(getCurrentTransformation());
+}
+
+SdrDragMethod::SdrDragMethod(SdrDragView& rNewView)
+:   maSdrDragEntries(),
+    maOverlayObjectList(),
+    mrSdrDragView(rNewView),
+    mbMoveOnly(false),
+    mbSolidDraggingActive(getSdrDragView().IsSolidDragging()),
+    mbShiftPressed(false)
+{
+    if(mbSolidDraggingActive && Application::GetSettings().GetStyleSettings().GetHighContrastMode())
+    {
+        // fallback to wireframe when high contrast is used
+        mbSolidDraggingActive = false;
+    }
+}
+
+SdrDragMethod::~SdrDragMethod()
+{
+    clearSdrDragEntries();
+}
+
+void SdrDragMethod::Show()
+{
+    getSdrDragView().ShowDragObj();
+}
+
+void SdrDragMethod::Hide()
+{
+    getSdrDragView().HideDragObj();
+}
+
+basegfx::B2DHomMatrix SdrDragMethod::getCurrentTransformation()
+{
+    return basegfx::B2DHomMatrix();
+}
+
+void SdrDragMethod::CancelSdrDrag()
+{
+    Hide();
+}
+
+typedef std::map< const SdrObject*, SdrObject* > SdrObjectAndCloneMap;
+
+void SdrDragMethod::CreateOverlayGeometry(
+    sdr::overlay::OverlayManager& rOverlayManager,
+    const sdr::contact::ObjectContact& rObjectContact)
+{
+    // We do client-side object manipulation with the Kit API
+    if (comphelper::LibreOfficeKit::isActive())
+        return;
+
+    // create SdrDragEntries on demand
+    if(maSdrDragEntries.empty())
+    {
+        createSdrDragEntries();
+    }
+
+    // if there are entries, derive OverlayObjects from the entries, including
+    // modification from current interactive state
+    if(!maSdrDragEntries.empty())
+    {
+        // #i54102# SdrDragEntrySdrObject creates clones of SdrObjects as base for creating the needed
+        // primitives, holding the original and the clone. If connectors (Edges) are involved,
+        // the cloned connectors need to be connected to the cloned SdrObjects (after cloning
+        // they are connected to the original SdrObjects). To do so, trigger the preparation
+        // steps for SdrDragEntrySdrObject, save an association of (orig, clone) in a helper
+        // and evtl. remember if it was an edge
+        SdrObjectAndCloneMap aOriginalAndClones;
+        std::vector< SdrEdgeObj* > aEdges;
+
+        // #i54102# execute prepareCurrentState for all SdrDragEntrySdrObject, register pair of original and
+        // clone, remember edges
+        for(auto const & a: maSdrDragEntries)
+        {
+            SdrDragEntrySdrObject* pSdrDragEntrySdrObject = dynamic_cast< SdrDragEntrySdrObject*>(a.get());
+
+            if(pSdrDragEntrySdrObject)
+            {
+                pSdrDragEntrySdrObject->prepareCurrentState(*this);
+
+                SdrEdgeObj* pSdrEdgeObj = dynamic_cast< SdrEdgeObj* >(pSdrDragEntrySdrObject->getClone());
+
+                if(pSdrEdgeObj)
+                {
+                    aEdges.push_back(pSdrEdgeObj);
+                }
+
+                if(pSdrDragEntrySdrObject->getClone())
+                {
+                    aOriginalAndClones[&pSdrDragEntrySdrObject->getOriginal()] = pSdrDragEntrySdrObject->getClone();
+                }
+            }
+        }
+
+        // #i54102# if there are edges, reconnect their ends to the corresponding clones (if found)
+        for(SdrEdgeObj* pSdrEdgeObj: aEdges)
+        {
+            SdrObject* pConnectedTo = pSdrEdgeObj->GetConnectedNode(true);
+
+            if(pConnectedTo)
+            {
+                SdrObjectAndCloneMap::iterator aEntry = aOriginalAndClones.find(pConnectedTo);
+
+                if(aEntry != aOriginalAndClones.end())
+                {
+                    pSdrEdgeObj->ConnectToNode(true, aEntry->second);
+                }
+            }
+
+            pConnectedTo = pSdrEdgeObj->GetConnectedNode(false);
+
+            if(pConnectedTo)
+            {
+                SdrObjectAndCloneMap::iterator aEntry = aOriginalAndClones.find(pConnectedTo);
+
+                if(aEntry != aOriginalAndClones.end())
+                {
+                    pSdrEdgeObj->ConnectToNode(false, aEntry->second);
+                }
+            }
+        }
+
+        // collect primitives for visualisation
+        drawinglayer::primitive2d::Primitive2DContainer aResult;
+        drawinglayer::primitive2d::Primitive2DContainer aResultTransparent;
+
+        for(auto & pCandidate: maSdrDragEntries)
+        {
+            const drawinglayer::primitive2d::Primitive2DContainer aCandidateResult(pCandidate->createPrimitive2DSequenceInCurrentState(*this));
+
+            if(!aCandidateResult.empty())
+            {
+                if(pCandidate->getAddToTransparent())
+                {
+                    aResultTransparent.append(aCandidateResult);
+                }
+                else
+                {
+                    aResult.append(aCandidateResult);
+                }
+            }
+        }
+
+        if(DoAddConnectorOverlays())
+        {
+            const drawinglayer::primitive2d::Primitive2DContainer aConnectorOverlays(AddConnectorOverlays());
+
+            if(!aConnectorOverlays.empty())
+            {
+                // add connector overlays to transparent part
+                aResultTransparent.append(aConnectorOverlays);
+            }
+        }
+
+        if(!aResult.empty())
+        {
+            std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(
+                new sdr::overlay::OverlayPrimitive2DSequenceObject(
+                    aResult));
+
+            insertNewlyCreatedOverlayObjectForSdrDragMethod(
+                std::move(pNewOverlayObject),
+                rObjectContact,
+                rOverlayManager);
+        }
+
+        if(!aResultTransparent.empty())
+        {
+            drawinglayer::primitive2d::Primitive2DReference aUnifiedTransparencePrimitive2D(new drawinglayer::primitive2d::UnifiedTransparencePrimitive2D(aResultTransparent, 0.5));
+            aResultTransparent = drawinglayer::primitive2d::Primitive2DContainer { aUnifiedTransparencePrimitive2D };
+
+            std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(
+                new sdr::overlay::OverlayPrimitive2DSequenceObject(
+                    aResultTransparent));
+
+            insertNewlyCreatedOverlayObjectForSdrDragMethod(
+                std::move(pNewOverlayObject),
+                rObjectContact,
+                rOverlayManager);
+        }
+    }
+
+    // add DragStripes if necessary (help lines cross the page when dragging)
+    if(getSdrDragView().IsDragStripes())
+    {
+        tools::Rectangle aActionRectangle;
+        getSdrDragView().TakeActionRect(aActionRectangle);
+
+        const basegfx::B2DPoint aTopLeft(aActionRectangle.Left(), aActionRectangle.Top());
+        const basegfx::B2DPoint aBottomRight(aActionRectangle.Right(), aActionRectangle.Bottom());
+        std::unique_ptr<sdr::overlay::OverlayRollingRectangleStriped> pNew(
+            new sdr::overlay::OverlayRollingRectangleStriped(
+                aTopLeft,
+                aBottomRight,
+                true,
+                false));
+
+        insertNewlyCreatedOverlayObjectForSdrDragMethod(
+            std::move(pNew),
+            rObjectContact,
+            rOverlayManager);
+    }
+}
+
+void SdrDragMethod::destroyOverlayGeometry()
+{
+    maOverlayObjectList.clear();
+}
+
+bool SdrDragMethod::DoAddConnectorOverlays()
+{
+    // these conditions are translated from SdrDragView::ImpDrawEdgeXor
+    const SdrMarkList& rMarkedNodes = getSdrDragView().GetEdgesOfMarkedNodes();
+
+    if(!rMarkedNodes.GetMarkCount())
+    {
+        return false;
+    }
+
+    if(getSdrDragView().IsDraggingPoints() || getSdrDragView().IsDraggingGluePoints())
+    {
+        return false;
+    }
+
+    if(!getMoveOnly() && !(
+        dynamic_cast<const SdrDragMove*>(this) != nullptr || dynamic_cast<const SdrDragResize*>(this) != nullptr ||
+        dynamic_cast<const SdrDragRotate*>(this) != nullptr || dynamic_cast<const SdrDragMirror*>(this) != nullptr ))
+    {
+        return false;
+    }
+
+    // one more migrated from SdrEdgeObj::NspToggleEdgeXor
+    if( dynamic_cast< const SdrDragObjOwn* >(this) != nullptr || dynamic_cast< const SdrDragMovHdl* >(this) != nullptr )
+    {
+        return false;
+    }
+
+    return true;
+}
+
+drawinglayer::primitive2d::Primitive2DContainer SdrDragMethod::AddConnectorOverlays()
+{
+    drawinglayer::primitive2d::Primitive2DContainer aRetval;
+    const bool bDetail(getMoveOnly());
+    const SdrMarkList& rMarkedNodes = getSdrDragView().GetEdgesOfMarkedNodes();
+
+    for(size_t a = 0; a < rMarkedNodes.GetMarkCount(); ++a)
+    {
+        SdrMark* pEM = rMarkedNodes.GetMark(a);
+
+        if(pEM && pEM->GetMarkedSdrObj())
+        {
+            SdrEdgeObj* pEdge = dynamic_cast< SdrEdgeObj* >(pEM->GetMarkedSdrObj());
+
+            if(pEdge)
+            {
+                const basegfx::B2DPolygon aEdgePolygon(pEdge->ImplAddConnectorOverlay(*this, pEM->IsCon1(), pEM->IsCon2(), bDetail));
+
+                if(aEdgePolygon.count())
+                {
+                    // this polygon is a temporary calculated connector path, so it is not possible to fetch
+                    // the needed primitives directly from the pEdge object which does not get changed. If full
+                    // drag is on, use the SdrObjects ItemSet to create an adequate representation
+                    bool bUseSolidDragging(getSolidDraggingActive());
+
+                    if(bUseSolidDragging)
+                    {
+                        // switch off solid dragging if connector is not visible
+                        if(!pEdge->HasLineStyle())
+                        {
+                            bUseSolidDragging = false;
+                        }
+                    }
+
+                    if(bUseSolidDragging)
+                    {
+                        const SfxItemSet& rItemSet = pEdge->GetMergedItemSet();
+                        const drawinglayer::attribute::SdrLineAttribute aLine(
+                            drawinglayer::primitive2d::createNewSdrLineAttribute(rItemSet));
+
+                        if(!aLine.isDefault())
+                        {
+                            const drawinglayer::attribute::SdrLineStartEndAttribute aLineStartEnd(
+                                drawinglayer::primitive2d::createNewSdrLineStartEndAttribute(
+                                    rItemSet,
+                                    aLine.getWidth()));
+
+                            aRetval.push_back(drawinglayer::primitive2d::createPolygonLinePrimitive(
+                                    aEdgePolygon,
+                                    aLine,
+                                    aLineStartEnd));
+                        }
+                    }
+                    else
+                    {
+                        const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+                        basegfx::BColor aColA(aSvtOptionsDrawinglayer.GetStripeColorA().getBColor());
+                        basegfx::BColor aColB(aSvtOptionsDrawinglayer.GetStripeColorB().getBColor());
+                        const double fStripeLength(aSvtOptionsDrawinglayer.GetStripeLength());
+
+                        if(Application::GetSettings().GetStyleSettings().GetHighContrastMode())
+                        {
+                            aColA = aColB = Application::GetSettings().GetStyleSettings().GetHighlightColor().getBColor();
+                            aColB.invert();
+                        }
+
+                        drawinglayer::primitive2d::Primitive2DReference aPolyPolygonMarkerPrimitive2D(
+                            new drawinglayer::primitive2d::PolygonMarkerPrimitive2D(
+                                aEdgePolygon, aColA, aColB, fStripeLength));
+                        aRetval.push_back(aPolyPolygonMarkerPrimitive2D);
+                    }
+                }
+            }
+        }
+    }
+
+    return aRetval;
+}
+
+
+SdrDragMovHdl::SdrDragMovHdl(SdrDragView& rNewView)
+:   SdrDragMethod(rNewView)
+{
+}
+
+void SdrDragMovHdl::createSdrDragEntries()
+{
+    // SdrDragMovHdl does not use the default drags,
+    // but creates nothing
+}
+
+OUString SdrDragMovHdl::GetSdrDragComment() const
+{
+    OUString aStr=SvxResId(STR_DragMethMovHdl);
+    if (getSdrDragView().IsDragWithCopy()) aStr+=SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+bool SdrDragMovHdl::BeginSdrDrag()
+{
+    if( !GetDragHdl() )
+        return false;
+
+    DragStat().SetRef1(GetDragHdl()->GetPos());
+    DragStat().SetShown(!DragStat().IsShown());
+    SdrHdlKind eKind=GetDragHdl()->GetKind();
+    SdrHdl* pH1=GetHdlList().GetHdl(SdrHdlKind::Ref1);
+    SdrHdl* pH2=GetHdlList().GetHdl(SdrHdlKind::Ref2);
+
+    if (eKind==SdrHdlKind::MirrorAxis)
+    {
+        if (pH1==nullptr || pH2==nullptr)
+        {
+            OSL_FAIL("SdrDragMovHdl::BeginSdrDrag(): Moving the axis of reflection: reference handles not found.");
+            return false;
+        }
+
+        DragStat().SetActionRect(tools::Rectangle(pH1->GetPos(),pH2->GetPos()));
+    }
+    else
+    {
+        Point aPt(GetDragHdl()->GetPos());
+        DragStat().SetActionRect(tools::Rectangle(aPt,aPt));
+    }
+
+    return true;
+}
+
+void SdrDragMovHdl::MoveSdrDrag(const Point& rNoSnapPnt)
+{
+    Point aPnt(rNoSnapPnt);
+
+    if ( GetDragHdl() && DragStat().CheckMinMoved(rNoSnapPnt))
+    {
+        if (GetDragHdl()->GetKind()==SdrHdlKind::MirrorAxis)
+        {
+            SdrHdl* pH1=GetHdlList().GetHdl(SdrHdlKind::Ref1);
+            SdrHdl* pH2=GetHdlList().GetHdl(SdrHdlKind::Ref2);
+
+            if (pH1==nullptr || pH2==nullptr)
+                return;
+
+            if (!DragStat().IsNoSnap())
+            {
+                long nBestXSnap=0;
+                long nBestYSnap=0;
+                bool bXSnapped=false;
+                bool bYSnapped=false;
+                Point aDif(aPnt-DragStat().GetStart());
+                getSdrDragView().CheckSnap(Ref1()+aDif,nBestXSnap,nBestYSnap,bXSnapped,bYSnapped);
+                getSdrDragView().CheckSnap(Ref2()+aDif,nBestXSnap,nBestYSnap,bXSnapped,bYSnapped);
+                aPnt.AdjustX(nBestXSnap );
+                aPnt.AdjustY(nBestYSnap );
+            }
+
+            if (aPnt!=DragStat().GetNow())
+            {
+                Hide();
+                DragStat().NextMove(aPnt);
+                Point aDif(DragStat().GetNow()-DragStat().GetStart());
+                pH1->SetPos(Ref1()+aDif);
+                pH2->SetPos(Ref2()+aDif);
+
+                SdrHdl* pHM = GetHdlList().GetHdl(SdrHdlKind::MirrorAxis);
+
+                if(pHM)
+                    pHM->Touch();
+
+                Show();
+                DragStat().SetActionRect(tools::Rectangle(pH1->GetPos(),pH2->GetPos()));
+            }
+        }
+        else
+        {
+            if (!DragStat().IsNoSnap()) SnapPos(aPnt);
+            long nSA=0;
+
+            if (getSdrDragView().IsAngleSnapEnabled())
+                nSA=getSdrDragView().GetSnapAngle();
+
+            if (getSdrDragView().IsMirrorAllowed(true,true))
+            { // limited
+                if (!getSdrDragView().IsMirrorAllowed()) nSA=4500;
+                if (!getSdrDragView().IsMirrorAllowed(true)) nSA=9000;
+            }
+
+            if (getSdrDragView().IsOrtho() && nSA!=9000)
+                nSA=4500;
+
+            if (nSA!=0)
+            { // angle snapping
+                SdrHdlKind eRef=SdrHdlKind::Ref1;
+
+                if (GetDragHdl()->GetKind()==SdrHdlKind::Ref1)
+                    eRef=SdrHdlKind::Ref2;
+
+                SdrHdl* pH=GetHdlList().GetHdl(eRef);
+
+                if (pH!=nullptr)
+                {
+                    Point aRef(pH->GetPos());
+                    long nAngle=NormAngle36000(GetAngle(aPnt-aRef));
+                    long nNewAngle=nAngle;
+                    nNewAngle+=nSA/2;
+                    nNewAngle/=nSA;
+                    nNewAngle*=nSA;
+                    nNewAngle=NormAngle36000(nNewAngle);
+                    double a=(nNewAngle-nAngle)*F_PI18000;
+                    double nSin=sin(a);
+                    double nCos=cos(a);
+                    RotatePoint(aPnt,aRef,nSin,nCos);
+
+                    // eliminate rounding errors for certain values
+                    if (nSA==9000)
+                    {
+                        if (nNewAngle==0    || nNewAngle==18000) aPnt.setY(aRef.Y() );
+                        if (nNewAngle==9000 || nNewAngle==27000) aPnt.setX(aRef.X() );
+                    }
+
+                    if (nSA==4500)
+                        OrthoDistance8(aRef,aPnt,true);
+                }
+            }
+
+            if (aPnt!=DragStat().GetNow())
+            {
+                Hide();
+                DragStat().NextMove(aPnt);
+                GetDragHdl()->SetPos(DragStat().GetNow());
+                SdrHdl* pHM = GetHdlList().GetHdl(SdrHdlKind::MirrorAxis);
+
+                if(pHM)
+                    pHM->Touch();
+
+                Show();
+                DragStat().SetActionRect(tools::Rectangle(aPnt,aPnt));
+            }
+        }
+    }
+}
+
+bool SdrDragMovHdl::EndSdrDrag(bool /*bCopy*/)
+{
+    if( GetDragHdl() )
+    {
+        switch (GetDragHdl()->GetKind())
+        {
+            case SdrHdlKind::Ref1:
+                Ref1()=DragStat().GetNow();
+                break;
+
+            case SdrHdlKind::Ref2:
+                Ref2()=DragStat().GetNow();
+                break;
+
+            case SdrHdlKind::MirrorAxis:
+                Ref1()+=DragStat().GetNow()-DragStat().GetStart();
+                Ref2()+=DragStat().GetNow()-DragStat().GetStart();
+                break;
+
+            default: break;
+        }
+    }
+
+    return true;
+}
+
+void SdrDragMovHdl::CancelSdrDrag()
+{
+    Hide();
+
+    SdrHdl* pHdl = GetDragHdl();
+    if( pHdl )
+        pHdl->SetPos(DragStat().GetRef1());
+
+    SdrHdl* pHM = GetHdlList().GetHdl(SdrHdlKind::MirrorAxis);
+
+    if(pHM)
+        pHM->Touch();
+}
+
+PointerStyle SdrDragMovHdl::GetSdrDragPointer() const
+{
+    const SdrHdl* pHdl = GetDragHdl();
+
+    if (pHdl!=nullptr)
+    {
+        return pHdl->GetPointer();
+    }
+
+    return PointerStyle::RefHand;
+}
+
+
+SdrDragObjOwn::SdrDragObjOwn(SdrDragView& rNewView)
+:   SdrDragMethod(rNewView)
+{
+    const SdrObject* pObj = GetDragObj();
+
+    if(pObj)
+    {
+        // suppress full drag for some object types
+        setSolidDraggingActive(pObj->supportsFullDrag());
+    }
+}
+
+SdrDragObjOwn::~SdrDragObjOwn()
+{
+}
+
+void SdrDragObjOwn::createSdrDragEntries()
+{
+    if(mxClone)
+    {
+        basegfx::B2DPolyPolygon aDragPolyPolygon;
+        bool bAddWireframe(true);
+
+        if(getSolidDraggingActive())
+        {
+            SdrPageView* pPV = getSdrDragView().GetSdrPageView();
+
+            if(pPV && pPV->PageWindowCount())
+            {
+                addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntrySdrObject(*mxClone, false)));
+
+                // potentially no wireframe needed, full drag works
+                bAddWireframe = false;
+            }
+        }
+
+        if(!bAddWireframe)
+        {
+            // check for extra conditions for wireframe, e.g. no border at
+            // objects
+            if(!mxClone->HasLineStyle())
+            {
+                bAddWireframe = true;
+            }
+        }
+
+        if(bAddWireframe)
+        {
+            // use wireframe poly when full drag is off or did not work
+            aDragPolyPolygon = mxClone->TakeXorPoly();
+        }
+
+        // add evtl. extra DragPolyPolygon
+        const basegfx::B2DPolyPolygon aSpecialDragPolyPolygon(mxClone->getSpecialDragPoly(DragStat()));
+
+        if(aSpecialDragPolyPolygon.count())
+        {
+            aDragPolyPolygon.append(aSpecialDragPolyPolygon);
+        }
+
+        if(aDragPolyPolygon.count())
+        {
+            addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntryPolyPolygon(aDragPolyPolygon)));
+        }
+    }
+}
+
+OUString SdrDragObjOwn::GetSdrDragComment() const
+{
+    OUString aStr;
+    // #i103058# get info string from the clone preferred, the original will
+    // not be changed. For security, use original as fallback
+    if(mxClone)
+    {
+        aStr = mxClone->getSpecialDragComment(DragStat());
+    }
+    else
+    {
+        const SdrObject* pObj = GetDragObj();
+
+        if(pObj)
+        {
+            aStr = pObj->getSpecialDragComment(DragStat());
+        }
+    }
+    return aStr;
+}
+
+bool SdrDragObjOwn::BeginSdrDrag()
+{
+    if(!mxClone)
+    {
+        const SdrObject* pObj = GetDragObj();
+
+        if(pObj && !pObj->IsResizeProtect())
+        {
+            if(pObj->beginSpecialDrag(DragStat()))
+            {
+                // create initial clone to have a start visualization
+                mxClone = pObj->getFullDragClone();
+                mxClone->applySpecialDrag(DragStat());
+
+                return true;
+            }
+        }
+    }
+
+    return false;
+}
+
+void SdrDragObjOwn::MoveSdrDrag(const Point& rNoSnapPnt)
+{
+    const SdrObject* pObj = GetDragObj();
+
+    if (!pObj)
+        // No object to drag.  Bail out.
+        return;
+
+    Point aPnt(rNoSnapPnt);
+    SdrPageView* pPV = GetDragPV();
+
+    if (!pPV)
+        // No page view available.  Bail out.
+        return;
+
+    if(!DragStat().IsNoSnap())
+    {
+        SnapPos(aPnt);
+    }
+    if(getSdrDragView().IsOrtho())
+    {
+        if (DragStat().IsOrtho8Possible())
+        {
+            OrthoDistance8(DragStat().GetStart(),aPnt,getSdrDragView().IsBigOrtho());
+        }
+        else if (DragStat().IsOrtho4Possible())
+        {
+            OrthoDistance4(DragStat().GetStart(),aPnt,getSdrDragView().IsBigOrtho());
+        }
+    }
+
+    if (!DragStat().CheckMinMoved(rNoSnapPnt))
+        // Not moved by the minimum threshold. Nothing to do.
+        return;
+
+    Hide();
+    DragStat().NextMove(aPnt);
+
+    // since SdrDragObjOwn currently supports no transformation of
+    // existing SdrDragEntries but only their recreation, a recreation
+    // after every move is needed in this mode. Delete existing
+    // SdrDragEntries here  to force their recreation in the following Show().
+    clearSdrDragEntries();
+
+    // delete current clone (after the last reference to it is deleted above)
+    mxClone.reset();
+
+    // create a new clone and modify to current drag state
+    mxClone = pObj->getFullDragClone();
+    mxClone->applySpecialDrag(DragStat());
+
+    // AutoGrowWidth may change for SdrTextObj due to the automatism used
+    // with bDisableAutoWidthOnDragging, so not only geometry changes but
+    // also this (pretty indirect) property change is possible. If it gets
+    // changed, it needs to be copied to the original since nothing will
+    // happen when it only changes in the drag clone
+    const bool bOldAutoGrowWidth(pObj->GetMergedItem(SDRATTR_TEXT_AUTOGROWWIDTH).GetValue());
+    const bool bNewAutoGrowWidth(mxClone->GetMergedItem(SDRATTR_TEXT_AUTOGROWWIDTH).GetValue());
+
+    if (bOldAutoGrowWidth != bNewAutoGrowWidth)
+    {
+        GetDragObj()->SetMergedItem(makeSdrTextAutoGrowWidthItem(bNewAutoGrowWidth));
+    }
+
+    Show();
+}
+
+bool SdrDragObjOwn::EndSdrDrag(bool /*bCopy*/)
+{
+    Hide();
+    std::vector< std::unique_ptr<SdrUndoAction> > vConnectorUndoActions;
+    bool bRet = false;
+    SdrObject* pObj = GetDragObj();
+
+    if(pObj)
+    {
+        std::unique_ptr<SdrUndoAction> pUndo;
+        std::unique_ptr<SdrUndoAction> pUndo2;
+        const bool bUndo = getSdrDragView().IsUndoEnabled();
+
+        if( bUndo )
+        {
+            getSdrDragView().EndTextEditAllViews();
+            if(!getSdrDragView().IsInsObjPoint() && pObj->IsInserted() )
+            {
+                if (DragStat().IsEndDragChangesAttributes())
+                {
+                    pUndo=getSdrDragView().GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj);
+
+                    if (DragStat().IsEndDragChangesGeoAndAttributes())
+                    {
+                        vConnectorUndoActions = getSdrDragView().CreateConnectorUndo( *pObj );
+                        pUndo2 = getSdrDragView().GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj);
+                    }
+                }
+                else
+                {
+                    vConnectorUndoActions = getSdrDragView().CreateConnectorUndo( *pObj );
+                    pUndo= getSdrDragView().GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj);
+                }
+            }
+
+            if( pUndo )
+            {
+                getSdrDragView().BegUndo( pUndo->GetComment() );
+            }
+            else
+            {
+                getSdrDragView().BegUndo();
+            }
+        }
+
+        // Maybe use operator = for setting changed object data (do not change selection in
+        // view, this will destroy the interactor). This is possible since a clone is now
+        // directly modified by the modifiers. Only SdrTableObj is adding own UNDOs
+        // in its SdrTableObj::endSpecialDrag, so currently not possible. OTOH it uses
+        // a CreateUndoGeoObject(), so maybe setting SetEndDragChangesAttributes is okay. I
+        // will test this now
+        tools::Rectangle aBoundRect0;
+
+        if(pObj->GetUserCall())
+        {
+            aBoundRect0 = pObj->GetLastBoundRect();
+        }
+
+        bRet = pObj->applySpecialDrag(DragStat());
+        if (DragStat().IsEndDragChangesLayout())
+        {
+            auto pGeoUndo = dynamic_cast<SdrUndoGeoObj*>(pUndo.get());
+            if (pGeoUndo)
+                pGeoUndo->SetSkipChangeLayout(true);
+        }
+
+        if(bRet)
+        {
+            pObj->SetChanged();
+            pObj->BroadcastObjectChange();
+            pObj->SendUserCall( SdrUserCallType::Resize, aBoundRect0 );
+        }
+
+        if(bRet && bUndo )
+        {
+            getSdrDragView().AddUndoActions( std::move(vConnectorUndoActions) );
+
+            if ( pUndo )
+            {
+                getSdrDragView().AddUndo(std::move(pUndo));
+            }
+
+            if ( pUndo2 )
+            {
+                getSdrDragView().AddUndo(std::move(pUndo2));
+            }
+        }
+
+        if( bUndo )
+            getSdrDragView().EndUndo();
+    }
+
+    return bRet;
+}
+
+PointerStyle SdrDragObjOwn::GetSdrDragPointer() const
+{
+    const SdrHdl* pHdl=GetDragHdl();
+
+    if (pHdl)
+    {
+        return pHdl->GetPointer();
+    }
+
+    return PointerStyle::Move;
+}
+
+
+void SdrDragMove::createSdrDragEntryForSdrObject(const SdrObject& rOriginal)
+{
+    // use the view-independent primitive representation (without
+    // evtl. GridOffset, that may be applied to the DragEntry individually)
+    addSdrDragEntry(
+        std::unique_ptr<SdrDragEntry>(
+            new SdrDragEntryPrimitive2DSequence(
+                rOriginal.GetViewContact().getViewIndependentPrimitive2DContainer())));
+
+}
+
+void SdrDragMove::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    rTarget.Move(Size(DragStat().GetDX(), DragStat().GetDY()));
+}
+
+SdrDragMove::SdrDragMove(SdrDragView& rNewView)
+    : SdrDragMethod(rNewView)
+    , nBestXSnap(0)
+    , nBestYSnap(0)
+    , bXSnapped(false)
+    , bYSnapped(false)
+{
+    setMoveOnly(true);
+}
+
+OUString SdrDragMove::GetSdrDragComment() const
+{
+    OUString aStr = ImpGetDescriptionStr(STR_DragMethMove)
+            + " (x="
+            + getSdrDragView().GetModel()->GetMetricString(DragStat().GetDX())
+            + " y="
+            + getSdrDragView().GetModel()->GetMetricString(DragStat().GetDY())
+            + ")";
+
+    if(getSdrDragView().IsDragWithCopy())
+    {
+        if(!getSdrDragView().IsInsObjPoint() && !getSdrDragView().IsInsGluePoint())
+        {
+            aStr += SvxResId(STR_EditWithCopy);
+        }
+    }
+    return aStr;
+}
+
+bool SdrDragMove::BeginSdrDrag()
+{
+    DragStat().SetActionRect(GetMarkedRect());
+    Show();
+
+    return true;
+}
+
+basegfx::B2DHomMatrix SdrDragMove::getCurrentTransformation()
+{
+    return basegfx::utils::createTranslateB2DHomMatrix(DragStat().GetDX(), DragStat().GetDY());
+}
+
+void SdrDragMove::ImpCheckSnap(const Point& rPt)
+{
+    Point aPt(rPt);
+    SdrSnap nRet=SnapPos(aPt);
+    aPt-=rPt;
+
+    if (nRet & SdrSnap::XSNAPPED)
+    {
+        if (bXSnapped)
+        {
+            if (std::abs(aPt.X())<std::abs(nBestXSnap))
+            {
+                nBestXSnap=aPt.X();
+            }
+        }
+        else
+        {
+            nBestXSnap=aPt.X();
+            bXSnapped=true;
+        }
+    }
+
+    if (nRet & SdrSnap::YSNAPPED)
+    {
+        if (bYSnapped)
+        {
+            if (std::abs(aPt.Y())<std::abs(nBestYSnap))
+            {
+                nBestYSnap=aPt.Y();
+            }
+        }
+        else
+        {
+            nBestYSnap=aPt.Y();
+            bYSnapped=true;
+        }
+    }
+}
+
+void SdrDragMove::MoveSdrDrag(const Point& rNoSnapPnt_)
+{
+    nBestXSnap=0;
+    nBestYSnap=0;
+    bXSnapped=false;
+    bYSnapped=false;
+    Point aNoSnapPnt(rNoSnapPnt_);
+    const tools::Rectangle& aSR=GetMarkedRect();
+    long nMovedx=aNoSnapPnt.X()-DragStat().GetStart().X();
+    long nMovedy=aNoSnapPnt.Y()-DragStat().GetStart().Y();
+    Point aLO(aSR.TopLeft());      aLO.AdjustX(nMovedx ); aLO.AdjustY(nMovedy );
+    Point aRU(aSR.BottomRight());  aRU.AdjustX(nMovedx ); aRU.AdjustY(nMovedy );
+    Point aLU(aLO.X(),aRU.Y());
+    Point aRO(aRU.X(),aLO.Y());
+    ImpCheckSnap(aLO);
+
+    if (!getSdrDragView().IsMoveSnapOnlyTopLeft())
+    {
+        ImpCheckSnap(aRO);
+        ImpCheckSnap(aLU);
+        ImpCheckSnap(aRU);
+    }
+
+    Point aPnt(aNoSnapPnt.X()+nBestXSnap,aNoSnapPnt.Y()+nBestYSnap);
+    bool bOrtho=getSdrDragView().IsOrtho();
+
+    if (bOrtho)
+        OrthoDistance8(DragStat().GetStart(),aPnt,getSdrDragView().IsBigOrtho());
+
+    if (DragStat().CheckMinMoved(aNoSnapPnt))
+    {
+        Point aPt1(aPnt);
+        tools::Rectangle aLR(getSdrDragView().GetWorkArea());
+        bool bWorkArea=!aLR.IsEmpty();
+        bool bDragLimit=IsDragLimit();
+
+        if (bDragLimit || bWorkArea)
+        {
+            tools::Rectangle aSR2(GetMarkedRect());
+            Point aD(aPt1-DragStat().GetStart());
+
+            if (bDragLimit)
+            {
+                tools::Rectangle aR2(GetDragLimitRect());
+
+                if (bWorkArea)
+                    aLR.Intersection(aR2);
+                else
+                    aLR=aR2;
+            }
+
+            if (aSR2.Left()>aLR.Left() || aSR2.Right()<aLR.Right())
+            { // any space to move to?
+                aSR2.Move(aD.X(),0);
+
+                if (aSR2.Left()<aLR.Left())
+                {
+                    aPt1.AdjustX( -(aSR2.Left()-aLR.Left()) );
+                }
+                else if (aSR2.Right()>aLR.Right())
+                {
+                    aPt1.AdjustX( -(aSR2.Right()-aLR.Right()) );
+                }
+            }
+            else
+                aPt1.setX(DragStat().GetStart().X() ); // no space to move to
+
+            if (aSR2.Top()>aLR.Top() || aSR2.Bottom()<aLR.Bottom())
+            { // any space to move to?
+                aSR2.Move(0,aD.Y());
+
+                if (aSR2.Top()<aLR.Top())
+                {
+                    aPt1.AdjustY( -(aSR2.Top()-aLR.Top()) );
+                }
+                else if (aSR2.Bottom()>aLR.Bottom())
+                {
+                    aPt1.AdjustY( -(aSR2.Bottom()-aLR.Bottom()) );
+                }
+            }
+            else
+                aPt1.setY(DragStat().GetStart().Y() ); // no space to move to
+        }
+
+        if (getSdrDragView().IsDraggingGluePoints())
+        { // restrict glue points to the BoundRect of the Obj
+            aPt1-=DragStat().GetStart();
+            const SdrMarkList& rML=GetMarkedObjectList();
+            const size_t nMarkCount=rML.GetMarkCount();
+
+            for (size_t nMarkNum=0; nMarkNum<nMarkCount; ++nMarkNum)
+            {
+                const SdrMark* pM=rML.GetMark(nMarkNum);
+                const SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+
+                if (!rPts.empty())
+                {
+                    const SdrObject* pObj=pM->GetMarkedSdrObj();
+                    const SdrGluePointList* pGPL=pObj->GetGluePointList();
+                    tools::Rectangle aBound(pObj->GetCurrentBoundRect());
+
+                    for (sal_uInt16 nId : rPts)
+                    {
+                        sal_uInt16 nGlueNum=pGPL->FindGluePoint(nId);
+
+                        if (nGlueNum!=SDRGLUEPOINT_NOTFOUND)
+                        {
+                            Point aPt((*pGPL)[nGlueNum].GetAbsolutePos(*pObj));
+                            aPt+=aPt1; // move by this much
+                            if (aPt.X()<aBound.Left()  ) aPt1.AdjustX( -(aPt.X()-aBound.Left()) )  ;
+                            if (aPt.X()>aBound.Right() ) aPt1.AdjustX( -(aPt.X()-aBound.Right()) ) ;
+                            if (aPt.Y()<aBound.Top()   ) aPt1.AdjustY( -(aPt.Y()-aBound.Top()) )   ;
+                            if (aPt.Y()>aBound.Bottom()) aPt1.AdjustY( -(aPt.Y()-aBound.Bottom()) );
+                        }
+                    }
+                }
+            }
+
+            aPt1+=DragStat().GetStart();
+        }
+
+        if (bOrtho)
+            OrthoDistance8(DragStat().GetStart(),aPt1,false);
+
+        if (aPt1!=DragStat().GetNow())
+        {
+            Hide();
+            DragStat().NextMove(aPt1);
+            tools::Rectangle aAction(GetMarkedRect());
+            aAction.Move(DragStat().GetDX(),DragStat().GetDY());
+            DragStat().SetActionRect(aAction);
+            Show();
+        }
+    }
+}
+
+bool SdrDragMove::EndSdrDrag(bool bCopy)
+{
+    Hide();
+
+    if (getSdrDragView().IsInsObjPoint() || getSdrDragView().IsInsGluePoint())
+        bCopy=false;
+
+    if (IsDraggingPoints())
+    {
+        getSdrDragView().MoveMarkedPoints(Size(DragStat().GetDX(),DragStat().GetDY()));
+    }
+    else if (IsDraggingGluePoints())
+    {
+        getSdrDragView().MoveMarkedGluePoints(Size(DragStat().GetDX(),DragStat().GetDY()),bCopy);
+    }
+    else
+    {
+        getSdrDragView().MoveMarkedObj(Size(DragStat().GetDX(),DragStat().GetDY()),bCopy);
+    }
+
+    return true;
+}
+
+PointerStyle SdrDragMove::GetSdrDragPointer() const
+{
+    if (IsDraggingPoints() || IsDraggingGluePoints())
+    {
+        return PointerStyle::MovePoint;
+    }
+    else
+    {
+        return PointerStyle::Move;
+    }
+}
+
+
+SdrDragResize::SdrDragResize(SdrDragView& rNewView)
+:   SdrDragMethod(rNewView),
+    aXFact(1,1),
+    aYFact(1,1)
+{
+}
+
+OUString SdrDragResize::GetSdrDragComment() const
+{
+    OUString aStr = ImpGetDescriptionStr(STR_DragMethResize);
+    Fraction aFact1(1,1);
+    Point aStart(DragStat().GetStart());
+    Point aRef(DragStat().GetRef1());
+    sal_Int32 nXDiv(aStart.X() - aRef.X());
+
+    if(!nXDiv)
+        nXDiv = 1;
+
+    sal_Int32 nYDiv(aStart.Y() - aRef.Y());
+
+    if(!nYDiv)
+        nYDiv = 1;
+
+    bool bX(aXFact != aFact1 && std::abs(nXDiv) > 1);
+    bool bY(aYFact != aFact1 && std::abs(nYDiv) > 1);
+
+    if(bX || bY)
+    {
+        aStr += " (";
+
+        bool bEqual(aXFact == aYFact);
+        if(bX)
+        {
+            if(!bEqual)
+                aStr += "x=";
+
+            aStr += SdrModel::GetPercentString(aXFact);
+        }
+
+        if(bY && !bEqual)
+        {
+            if(bX)
+                aStr += " ";
+
+            aStr += "y=" + SdrModel::GetPercentString(aYFact);
+        }
+
+        aStr += ")";
+    }
+
+    if(getSdrDragView().IsDragWithCopy())
+        aStr += SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+bool SdrDragResize::BeginSdrDrag()
+{
+    SdrHdlKind eRefHdl=SdrHdlKind::Move;
+    SdrHdl* pRefHdl=nullptr;
+
+    switch (GetDragHdlKind())
+    {
+        case SdrHdlKind::UpperLeft: eRefHdl=SdrHdlKind::LowerRight; break;
+        case SdrHdlKind::Upper: eRefHdl=SdrHdlKind::Lower; DragStat().SetHorFixed(true); break;
+        case SdrHdlKind::UpperRight: eRefHdl=SdrHdlKind::LowerLeft; break;
+        case SdrHdlKind::Left : eRefHdl=SdrHdlKind::Right; DragStat().SetVerFixed(true); break;
+        case SdrHdlKind::Right: eRefHdl=SdrHdlKind::Left ; DragStat().SetVerFixed(true); break;
+        case SdrHdlKind::LowerLeft: eRefHdl=SdrHdlKind::UpperRight; break;
+        case SdrHdlKind::Lower: eRefHdl=SdrHdlKind::Upper; DragStat().SetHorFixed(true); break;
+        case SdrHdlKind::LowerRight: eRefHdl=SdrHdlKind::UpperLeft; break;
+        default: break;
+    }
+
+    if (eRefHdl!=SdrHdlKind::Move)
+        pRefHdl=GetHdlList().GetHdl(eRefHdl);
+
+    if (pRefHdl!=nullptr && !getSdrDragView().IsResizeAtCenter())
+    {
+        DragStat().SetRef1(pRefHdl->GetPos());
+    }
+    else
+    {
+        SdrHdl* pRef1=GetHdlList().GetHdl(SdrHdlKind::UpperLeft);
+        SdrHdl* pRef2=GetHdlList().GetHdl(SdrHdlKind::LowerRight);
+
+        if (pRef1!=nullptr && pRef2!=nullptr)
+        {
+            DragStat().SetRef1(tools::Rectangle(pRef1->GetPos(),pRef2->GetPos()).Center());
+        }
+        else
+        {
+            DragStat().SetRef1(GetMarkedRect().Center());
+        }
+    }
+
+    Show();
+
+    return true;
+}
+
+basegfx::B2DHomMatrix SdrDragResize::getCurrentTransformation()
+{
+    basegfx::B2DHomMatrix aRetval(basegfx::utils::createTranslateB2DHomMatrix(
+        -DragStat().GetRef1().X(), -DragStat().GetRef1().Y()));
+    aRetval.scale(double(aXFact), double(aYFact));
+    aRetval.translate(DragStat().GetRef1().X(), DragStat().GetRef1().Y());
+
+    return aRetval;
+}
+
+void SdrDragResize::MoveSdrDrag(const Point& rNoSnapPnt)
+{
+    Point aPnt(GetSnapPos(rNoSnapPnt));
+    Point aStart(DragStat().GetStart());
+    Point aRef(DragStat().GetRef1());
+    Fraction aMaxFact(0x7FFFFFFF,1);
+    tools::Rectangle aLR(getSdrDragView().GetWorkArea());
+    bool bWorkArea=!aLR.IsEmpty();
+    bool bDragLimit=IsDragLimit();
+
+    if (bDragLimit || bWorkArea)
+    {
+        tools::Rectangle aSR(GetMarkedRect());
+
+        if (bDragLimit)
+        {
+            tools::Rectangle aR2(GetDragLimitRect());
+
+            if (bWorkArea)
+                aLR.Intersection(aR2);
+            else
+                aLR=aR2;
+        }
+
+        if (aPnt.X()<aLR.Left())
+            aPnt.setX(aLR.Left() );
+        else if (aPnt.X()>aLR.Right())
+            aPnt.setX(aLR.Right() );
+
+        if (aPnt.Y()<aLR.Top())
+            aPnt.setY(aLR.Top() );
+        else if (aPnt.Y()>aLR.Bottom())
+            aPnt.setY(aLR.Bottom() );
+
+        if (aRef.X()>aSR.Left())
+        {
+            Fraction aMax(aRef.X()-aLR.Left(),aRef.X()-aSR.Left());
+
+            if (aMax<aMaxFact)
+                aMaxFact=aMax;
+        }
+
+        if (aRef.X()<aSR.Right())
+        {
+            Fraction aMax(aLR.Right()-aRef.X(),aSR.Right()-aRef.X());
+
+            if (aMax<aMaxFact)
+                aMaxFact=aMax;
+        }
+
+        if (aRef.Y()>aSR.Top())
+        {
+            Fraction aMax(aRef.Y()-aLR.Top(),aRef.Y()-aSR.Top());
+
+            if (aMax<aMaxFact)
+                aMaxFact=aMax;
+        }
+
+        if (aRef.Y()<aSR.Bottom())
+        {
+            Fraction aMax(aLR.Bottom()-aRef.Y(),aSR.Bottom()-aRef.Y());
+
+            if (aMax<aMaxFact)
+                aMaxFact=aMax;
+        }
+    }
+
+    long nXDiv=aStart.X()-aRef.X(); if (nXDiv==0) nXDiv=1;
+    long nYDiv=aStart.Y()-aRef.Y(); if (nYDiv==0) nYDiv=1;
+    long nXMul=aPnt.X()-aRef.X();
+    long nYMul=aPnt.Y()-aRef.Y();
+
+    if (nXDiv<0)
+    {
+        nXDiv=-nXDiv;
+        nXMul=-nXMul;
+    }
+
+    if (nYDiv<0)
+    {
+        nYDiv=-nYDiv;
+        nYMul=-nYMul;
+    }
+
+    bool bXNeg=nXMul<0; if (bXNeg) nXMul=-nXMul;
+    bool bYNeg=nYMul<0; if (bYNeg) nYMul=-nYMul;
+    bool bOrtho=getSdrDragView().IsOrtho() || !getSdrDragView().IsResizeAllowed();
+
+    if (!DragStat().IsHorFixed() && !DragStat().IsVerFixed())
+    {
+        if (std::abs(nXDiv)<=1 || std::abs(nYDiv)<=1)
+            bOrtho=false;
+
+        if (bOrtho)
+        {
+            if ((Fraction(nXMul,nXDiv)>Fraction(nYMul,nYDiv)) !=getSdrDragView().IsBigOrtho())
+            {
+                nXMul=nYMul;
+                nXDiv=nYDiv;
+            }
+            else
+            {
+                nYMul=nXMul;
+                nYDiv=nXDiv;
+            }
+        }
+    }
+    else
+    {
+        if (bOrtho)
+        {
+            if (DragStat().IsHorFixed())
+            {
+                bXNeg=false;
+                nXMul=nYMul;
+                nXDiv=nYDiv;
+            }
+
+            if (DragStat().IsVerFixed())
+            {
+                bYNeg=false;
+                nYMul=nXMul;
+                nYDiv=nXDiv;
+            }
+        }
+        else
+        {
+            if (DragStat().IsHorFixed())
+            {
+                bXNeg=false;
+                nXMul=1;
+                nXDiv=1;
+            }
+
+            if (DragStat().IsVerFixed())
+            {
+                bYNeg=false;
+                nYMul=1;
+                nYDiv=1;
+            }
+        }
+    }
+
+    Fraction aNewXFact(nXMul,nXDiv);
+    Fraction aNewYFact(nYMul,nYDiv);
+
+    if (bOrtho)
+    {
+        if (aNewXFact>aMaxFact)
+        {
+            aNewXFact=aMaxFact;
+            aNewYFact=aMaxFact;
+        }
+
+        if (aNewYFact>aMaxFact)
+        {
+            aNewXFact=aMaxFact;
+            aNewYFact=aMaxFact;
+        }
+    }
+
+    if (bXNeg)
+        aNewXFact=Fraction(-aNewXFact.GetNumerator(),aNewXFact.GetDenominator());
+
+    if (bYNeg)
+        aNewYFact=Fraction(-aNewYFact.GetNumerator(),aNewYFact.GetDenominator());
+
+    if (DragStat().CheckMinMoved(aPnt))
+    {
+        if ((!DragStat().IsHorFixed() && aPnt.X()!=DragStat().GetNow().X()) ||
+            (!DragStat().IsVerFixed() && aPnt.Y()!=DragStat().GetNow().Y()))
+        {
+            Hide();
+            DragStat().NextMove(aPnt);
+            aXFact=aNewXFact;
+            aYFact=aNewYFact;
+            Show();
+        }
+    }
+}
+
+void SdrDragResize::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    rTarget.Resize(DragStat().GetRef1(),aXFact,aYFact);
+}
+
+bool SdrDragResize::EndSdrDrag(bool bCopy)
+{
+    Hide();
+
+    if (IsDraggingPoints())
+    {
+        getSdrDragView().ResizeMarkedPoints(DragStat().GetRef1(),aXFact,aYFact);
+    }
+    else if (IsDraggingGluePoints())
+    {
+        getSdrDragView().ResizeMarkedGluePoints(DragStat().GetRef1(),aXFact,aYFact,bCopy);
+    }
+    else
+    {
+        getSdrDragView().ResizeMarkedObj(DragStat().GetRef1(),aXFact,aYFact,bCopy);
+    }
+
+    return true;
+}
+
+PointerStyle SdrDragResize::GetSdrDragPointer() const
+{
+    const SdrHdl* pHdl=GetDragHdl();
+
+    if (pHdl!=nullptr)
+    {
+        return pHdl->GetPointer();
+    }
+
+    return PointerStyle::Move;
+}
+
+
+void SdrDragRotate::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    rTarget.Rotate(DragStat().GetRef1(), nAngle, sin(nAngle * F_PI18000), cos(nAngle * F_PI18000));
+}
+
+SdrDragRotate::SdrDragRotate(SdrDragView& rNewView)
+:   SdrDragMethod(rNewView),
+    nSin(0.0),
+    nCos(1.0),
+    nAngle0(0),
+    nAngle(0),
+    bRight(false)
+{
+}
+
+OUString SdrDragRotate::GetSdrDragComment() const
+{
+    OUString aStr = ImpGetDescriptionStr(STR_DragMethRotate) +
+        " (";
+    sal_Int32 nTmpAngle(NormAngle36000(nAngle));
+
+    if(bRight && nAngle)
+    {
+        nTmpAngle -= 36000;
+    }
+
+    aStr += SdrModel::GetAngleString(nTmpAngle) + ")";
+
+    if(getSdrDragView().IsDragWithCopy())
+        aStr += SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+bool SdrDragRotate::BeginSdrDrag()
+{
+    SdrHdl* pH=GetHdlList().GetHdl(SdrHdlKind::Ref1);
+
+    if (nullptr != pH)
+    {
+        Show();
+        DragStat().SetRef1(pH->GetPos());
+        nAngle0=GetAngle(DragStat().GetStart()-DragStat().GetRef1());
+        return true;
+    }
+
+    // RotGrfFlyFrame: Support rotation around center *without* Ref1 (normally
+    // the rotation point)
+    const tools::Rectangle aLocalMarkRect(getSdrDragView().GetMarkedObjRect());
+
+    if(!aLocalMarkRect.IsEmpty())
+    {
+        Show();
+        DragStat().SetRef1(aLocalMarkRect.Center());
+        nAngle0=GetAngle(DragStat().GetStart()-DragStat().GetRef1());
+        return true;
+    }
+
+    OSL_FAIL("SdrDragRotate::BeginSdrDrag(): No reference point handle found.");
+    return false;
+}
+
+basegfx::B2DHomMatrix SdrDragRotate::getCurrentTransformation()
+{
+    return basegfx::utils::createRotateAroundPoint(
+        DragStat().GetRef1().X(), DragStat().GetRef1().Y(),
+        -atan2(nSin, nCos));
+}
+
+void SdrDragRotate::MoveSdrDrag(const Point& rPnt_)
+{
+    Point aPnt(rPnt_);
+    if (DragStat().CheckMinMoved(aPnt))
+    {
+        long nNewAngle=NormAngle36000(GetAngle(aPnt-DragStat().GetRef1())-nAngle0);
+        long nSA=0;
+
+        if (getSdrDragView().IsAngleSnapEnabled())
+            nSA=getSdrDragView().GetSnapAngle();
+
+        if (!getSdrDragView().IsRotateAllowed())
+            nSA=9000;
+
+        if (nSA!=0)
+        { // angle snapping
+            nNewAngle+=nSA/2;
+            nNewAngle/=nSA;
+            nNewAngle*=nSA;
+        }
+
+        nNewAngle=NormAngle18000(nNewAngle);
+
+        if (nAngle!=nNewAngle)
+        {
+            sal_uInt16 nSekt0=GetAngleSector(nAngle);
+            sal_uInt16 nSekt1=GetAngleSector(nNewAngle);
+
+            if (nSekt0==0 && nSekt1==3)
+                bRight=true;
+
+            if (nSekt0==3 && nSekt1==0)
+                bRight=false;
+
+            nAngle=nNewAngle;
+            double a = nAngle * F_PI18000;
+            double nSin1=sin(a); // calculate now, so as little time as possible
+            double nCos1=cos(a); // passes between Hide() and Show()
+            Hide();
+            nSin=nSin1;
+            nCos=nCos1;
+            DragStat().NextMove(aPnt);
+            Show();
+        }
+    }
+}
+
+bool SdrDragRotate::EndSdrDrag(bool bCopy)
+{
+    Hide();
+
+    if (nAngle!=0)
+    {
+        if (IsDraggingPoints())
+        {
+            getSdrDragView().RotateMarkedPoints(DragStat().GetRef1(),nAngle);
+        }
+        else if (IsDraggingGluePoints())
+        {
+            getSdrDragView().RotateMarkedGluePoints(DragStat().GetRef1(),nAngle,bCopy);
+        }
+        else
+        {
+            getSdrDragView().RotateMarkedObj(DragStat().GetRef1(),nAngle,bCopy);
+        }
+    }
+    return true;
+}
+
+PointerStyle SdrDragRotate::GetSdrDragPointer() const
+{
+    return PointerStyle::Rotate;
+}
+
+
+SdrDragShear::SdrDragShear(SdrDragView& rNewView, bool bSlant1)
+:   SdrDragMethod(rNewView),
+    aFact(1,1),
+    nAngle0(0),
+    nAngle(0),
+    nTan(0.0),
+    bVertical(false),
+    bResize(false),
+    bUpSideDown(false),
+    bSlant(bSlant1)
+{
+}
+
+OUString SdrDragShear::GetSdrDragComment() const
+{
+    OUString aStr = ImpGetDescriptionStr(STR_DragMethShear) +
+        " (";
+
+    sal_Int32 nTmpAngle(nAngle);
+
+    if(bUpSideDown)
+        nTmpAngle += 18000;
+
+    nTmpAngle = NormAngle18000(nTmpAngle);
+
+    aStr += SdrModel::GetAngleString(nTmpAngle) + ")";
+
+    if(getSdrDragView().IsDragWithCopy())
+        aStr += SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+bool SdrDragShear::BeginSdrDrag()
+{
+    SdrHdlKind eRefHdl=SdrHdlKind::Move;
+    SdrHdl* pRefHdl=nullptr;
+
+    switch (GetDragHdlKind())
+    {
+        case SdrHdlKind::Upper: eRefHdl=SdrHdlKind::Lower; break;
+        case SdrHdlKind::Lower: eRefHdl=SdrHdlKind::Upper; break;
+        case SdrHdlKind::Left : eRefHdl=SdrHdlKind::Right; bVertical=true; break;
+        case SdrHdlKind::Right: eRefHdl=SdrHdlKind::Left ; bVertical=true; break;
+        default: break;
+    }
+
+    if (eRefHdl!=SdrHdlKind::Move)
+        pRefHdl=GetHdlList().GetHdl(eRefHdl);
+
+    if (pRefHdl!=nullptr)
+    {
+        DragStat().SetRef1(pRefHdl->GetPos());
+        nAngle0=GetAngle(DragStat().GetStart()-DragStat().GetRef1());
+    }
+    else
+    {
+        OSL_FAIL("SdrDragShear::BeginSdrDrag(): No reference point handle for shearing found.");
+        return false;
+    }
+
+    Show();
+    return true;
+}
+
+basegfx::B2DHomMatrix SdrDragShear::getCurrentTransformation()
+{
+    basegfx::B2DHomMatrix aRetval(basegfx::utils::createTranslateB2DHomMatrix(
+        -DragStat().GetRef1().X(), -DragStat().GetRef1().Y()));
+
+    if (bResize)
+    {
+        if (bVertical)
+        {
+            aRetval.scale(double(aFact), 1.0);
+            aRetval.shearY(-nTan);
+        }
+        else
+        {
+            aRetval.scale(1.0, double(aFact));
+            aRetval.shearX(-nTan);
+        }
+    }
+
+    aRetval.translate(DragStat().GetRef1().X(), DragStat().GetRef1().Y());
+
+    return aRetval;
+}
+
+void SdrDragShear::MoveSdrDrag(const Point& rPnt)
+{
+    if (!DragStat().CheckMinMoved(rPnt))
+        return;
+
+    bResize=!getSdrDragView().IsOrtho();
+    long nSA=0;
+
+    if (getSdrDragView().IsAngleSnapEnabled())
+        nSA=getSdrDragView().GetSnapAngle();
+
+    Point aP0(DragStat().GetStart());
+    Point aPnt(rPnt);
+    Fraction aNewFract(1,1);
+
+    // if angle snapping not activated, snap to raster (except when using slant)
+    if (nSA==0 && !bSlant)
+        aPnt=GetSnapPos(aPnt);
+
+    if (!bSlant && !bResize)
+    { // shear, but no resize
+        if (bVertical)
+            aPnt.setX(aP0.X() );
+        else
+            aPnt.setY(aP0.Y() );
+    }
+
+    Point aRef(DragStat().GetRef1());
+    Point aDif(aPnt-aRef);
+
+    long nNewAngle=0;
+
+    if (bSlant)
+    {
+        nNewAngle=NormAngle18000(-(GetAngle(aDif)-nAngle0));
+
+        if (bVertical)
+            nNewAngle=NormAngle18000(-nNewAngle);
+    }
+    else
+    {
+        if (bVertical)
+            nNewAngle=NormAngle18000(GetAngle(aDif));
+        else
+            nNewAngle=NormAngle18000(-(GetAngle(aDif)-9000));
+
+        if (nNewAngle<-9000 || nNewAngle>9000)
+            nNewAngle=NormAngle18000(nNewAngle+18000);
+
+        if (bResize)
+        {
+            Point aPt2(aPnt);
+
+            if (nSA!=0)
+                aPt2=GetSnapPos(aPnt); // snap this one in any case
+
+            if (bVertical)
+            {
+                aNewFract=Fraction(aPt2.X()-aRef.X(),aP0.X()-aRef.X());
+            }
+            else
+            {
+                aNewFract=Fraction(aPt2.Y()-aRef.Y(),aP0.Y()-aRef.Y());
+            }
+        }
+    }
+
+    bool bNeg=nNewAngle<0;
+
+    if (bNeg)
+        nNewAngle=-nNewAngle;
+
+    if (nSA!=0)
+    { // angle snapping
+        nNewAngle+=nSA/2;
+        nNewAngle/=nSA;
+        nNewAngle*=nSA;
+    }
+
+    nNewAngle=NormAngle36000(nNewAngle);
+    bUpSideDown=nNewAngle>9000 && nNewAngle<27000;
+
+    if (bSlant)
+    { // calculate resize for slant
+        // when angle snapping is activated, disable 89 degree limit
+        long nTmpAngle=nNewAngle;
+        if (bUpSideDown) nNewAngle-=18000;
+        if (bNeg) nTmpAngle=-nTmpAngle;
+        bResize=true;
+        aNewFract = cos(nTmpAngle * F_PI18000);
+        aFact.ReduceInaccurate(10); // three decimals should be enough
+    }
+
+    if (nNewAngle>8900)
+        nNewAngle=8900;
+
+    if (bNeg)
+        nNewAngle=-nNewAngle;
+
+    if (nAngle!=nNewAngle || aFact!=aNewFract)
+    {
+        nAngle=nNewAngle;
+        aFact=aNewFract;
+        double a = nAngle * F_PI18000;
+        double nTan1=tan(a); // calculate now, so as little time as possible passes between Hide() and Show()
+        Hide();
+        nTan=nTan1;
+        DragStat().NextMove(rPnt);
+        Show();
+    }
+}
+
+void SdrDragShear::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    if (bResize)
+    {
+        if (bVertical)
+        {
+            rTarget.Resize(DragStat().GetRef1(),aFact,Fraction(1,1));
+        }
+        else
+        {
+            rTarget.Resize(DragStat().GetRef1(),Fraction(1,1),aFact);
+        }
+    }
+
+    if (nAngle!=0)
+    {
+        rTarget.Shear(DragStat().GetRef1(), nAngle, tan(nAngle * F_PI18000), bVertical);
+    }
+}
+
+bool SdrDragShear::EndSdrDrag(bool bCopy)
+{
+    Hide();
+
+    if (bResize && aFact==Fraction(1,1))
+        bResize=false;
+
+    if (nAngle!=0 || bResize)
+    {
+        if (nAngle!=0 && bResize)
+        {
+            OUString aStr = ImpGetDescriptionStr(STR_EditShear);
+
+            if (bCopy)
+                aStr += SvxResId(STR_EditWithCopy);
+
+            getSdrDragView().BegUndo(aStr);
+        }
+
+        if (bResize)
+        {
+            if (bVertical)
+            {
+                getSdrDragView().ResizeMarkedObj(DragStat().GetRef1(),aFact,Fraction(1,1),bCopy);
+            }
+            else
+            {
+                getSdrDragView().ResizeMarkedObj(DragStat().GetRef1(),Fraction(1,1),aFact,bCopy);
+            }
+
+            bCopy=false;
+        }
+
+        if (nAngle!=0)
+        {
+            getSdrDragView().ShearMarkedObj(DragStat().GetRef1(),nAngle,bVertical,bCopy);
+        }
+
+        if (nAngle!=0 && bResize)
+            getSdrDragView().EndUndo();
+
+        return true;
+    }
+
+    return false;
+}
+
+PointerStyle SdrDragShear::GetSdrDragPointer() const
+{
+    if (bVertical)
+        return PointerStyle::VShear;
+    else
+        return PointerStyle::HShear;
+}
+
+
+void SdrDragMirror::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    if(bMirrored)
+    {
+        rTarget.Mirror(DragStat().GetRef1(), DragStat().GetRef2());
+    }
+}
+
+SdrDragMirror::SdrDragMirror(SdrDragView& rNewView)
+:   SdrDragMethod(rNewView),
+    nAngle(0),
+    bMirrored(false),
+    bSide0(false)
+{
+}
+
+bool SdrDragMirror::ImpCheckSide(const Point& rPnt) const
+{
+    long nAngle1=GetAngle(rPnt-DragStat().GetRef1());
+    nAngle1-=nAngle;
+    nAngle1=NormAngle36000(nAngle1);
+
+    return nAngle1<18000;
+}
+
+OUString SdrDragMirror::GetSdrDragComment() const
+{
+    OUString aStr;
+    if (aDif.X()==0)
+        aStr = ImpGetDescriptionStr(STR_DragMethMirrorHori);
+    else if (aDif.Y()==0)
+        aStr = ImpGetDescriptionStr(STR_DragMethMirrorVert);
+    else if (std::abs(aDif.X()) == std::abs(aDif.Y()))
+        aStr = ImpGetDescriptionStr(STR_DragMethMirrorDiag);
+    else
+        aStr = ImpGetDescriptionStr(STR_DragMethMirrorFree);
+
+    if (getSdrDragView().IsDragWithCopy())
+        aStr+=SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+bool SdrDragMirror::BeginSdrDrag()
+{
+    SdrHdl* pH1=GetHdlList().GetHdl(SdrHdlKind::Ref1);
+    SdrHdl* pH2=GetHdlList().GetHdl(SdrHdlKind::Ref2);
+
+    if (pH1!=nullptr && pH2!=nullptr)
+    {
+        DragStat().SetRef1(pH1->GetPos());
+        DragStat().SetRef2(pH2->GetPos());
+        Ref1()=pH1->GetPos();
+        Ref2()=pH2->GetPos();
+        aDif=pH2->GetPos()-pH1->GetPos();
+        bool b90=(aDif.X()==0) || aDif.Y()==0;
+        bool b45=b90 || (std::abs(aDif.X()) == std::abs(aDif.Y()));
+        nAngle=NormAngle36000(GetAngle(aDif));
+
+        if (!getSdrDragView().IsMirrorAllowed() && !b45)
+            return false; // free choice of axis angle not allowed
+
+        if (!getSdrDragView().IsMirrorAllowed() && !b90)
+            return false;  // 45 degrees not allowed either
+
+        bSide0=ImpCheckSide(DragStat().GetStart());
+        Show();
+        return true;
+    }
+    else
+    {
+        OSL_FAIL("SdrDragMirror::BeginSdrDrag(): Axis of reflection not found.");
+        return false;
+    }
+}
+
+basegfx::B2DHomMatrix SdrDragMirror::getCurrentTransformation()
+{
+    basegfx::B2DHomMatrix aRetval;
+
+    if (bMirrored)
+    {
+        const double fDeltaX(DragStat().GetRef2().X() - DragStat().GetRef1().X());
+        const double fDeltaY(DragStat().GetRef2().Y() - DragStat().GetRef1().Y());
+        const double fRotation(atan2(fDeltaY, fDeltaX));
+
+        aRetval = basegfx::utils::createTranslateB2DHomMatrix(-DragStat().GetRef1().X(), -DragStat().GetRef1().Y());
+        aRetval.rotate(-fRotation);
+        aRetval.scale(1.0, -1.0);
+        aRetval.rotate(fRotation);
+        aRetval.translate(DragStat().GetRef1().X(), DragStat().GetRef1().Y());
+    }
+
+    return aRetval;
+}
+
+void SdrDragMirror::MoveSdrDrag(const Point& rPnt)
+{
+    if (DragStat().CheckMinMoved(rPnt))
+    {
+        bool bNewSide=ImpCheckSide(rPnt);
+        bool bNewMirrored=bSide0!=bNewSide;
+
+        if (bMirrored!=bNewMirrored)
+        {
+            Hide();
+            bMirrored=bNewMirrored;
+            DragStat().NextMove(rPnt);
+            Show();
+        }
+    }
+}
+
+bool SdrDragMirror::EndSdrDrag(bool bCopy)
+{
+    Hide();
+
+    if (bMirrored)
+    {
+        getSdrDragView().MirrorMarkedObj(DragStat().GetRef1(),DragStat().GetRef2(),bCopy);
+    }
+
+    return true;
+}
+
+PointerStyle SdrDragMirror::GetSdrDragPointer() const
+{
+    return PointerStyle::Mirror;
+}
+
+
+SdrDragGradient::SdrDragGradient(SdrDragView& rNewView, bool bGrad)
+:   SdrDragMethod(rNewView),
+    pIAOHandle(nullptr),
+    bIsGradient(bGrad)
+{
+}
+
+OUString SdrDragGradient::GetSdrDragComment() const
+{
+    if(IsGradient())
+        return ImpGetDescriptionStr(STR_DragMethGradient);
+    else
+        return ImpGetDescriptionStr(STR_DragMethTransparence);
+}
+
+bool SdrDragGradient::BeginSdrDrag()
+{
+    bool bRetval(false);
+
+    pIAOHandle = static_cast<SdrHdlGradient*>(GetHdlList().GetHdl(IsGradient() ? SdrHdlKind::Gradient : SdrHdlKind::Transparence));
+
+    if(pIAOHandle)
+    {
+        // save old values
+        DragStat().SetRef1( pIAOHandle->GetPos() );
+        DragStat().SetRef2( pIAOHandle->Get2ndPos() );
+
+        // what was hit?
+        bool bHit(false);
+        SdrHdlColor* pColHdl = pIAOHandle->GetColorHdl1();
+
+        // init handling flags
+        pIAOHandle->SetMoveSingleHandle(false);
+        pIAOHandle->SetMoveFirstHandle(false);
+
+        // test first color handle
+        if(pColHdl)
+        {
+            basegfx::B2DPoint aPosition(DragStat().GetStart().X(), DragStat().GetStart().Y());
+
+            if(pColHdl->getOverlayObjectList().isHitLogic(aPosition))
+            {
+                bHit = true;
+                pIAOHandle->SetMoveSingleHandle(true);
+                pIAOHandle->SetMoveFirstHandle(true);
+            }
+        }
+
+        // test second color handle
+        pColHdl = pIAOHandle->GetColorHdl2();
+
+        if(!bHit && pColHdl)
+        {
+            basegfx::B2DPoint aPosition(DragStat().GetStart().X(), DragStat().GetStart().Y());
+
+            if(pColHdl->getOverlayObjectList().isHitLogic(aPosition))
+            {
+                bHit = true;
+                pIAOHandle->SetMoveSingleHandle(true);
+            }
+        }
+
+        // test gradient handle itself
+        if(!bHit)
+        {
+            basegfx::B2DPoint aPosition(DragStat().GetStart().X(), DragStat().GetStart().Y());
+
+            if(pIAOHandle->getOverlayObjectList().isHitLogic(aPosition))
+            {
+                bHit = true;
+            }
+        }
+
+        // everything up and running :o}
+        bRetval = bHit;
+    }
+    else
+    {
+        OSL_FAIL("SdrDragGradient::BeginSdrDrag(): IAOGradient not found.");
+    }
+
+    return bRetval;
+}
+
+void SdrDragGradient::MoveSdrDrag(const Point& rPnt)
+{
+    if(pIAOHandle && DragStat().CheckMinMoved(rPnt))
+    {
+        DragStat().NextMove(rPnt);
+
+        // Do the Move here!!! DragStat().GetStart()
+        Point aMoveDiff = rPnt - DragStat().GetStart();
+
+        if(pIAOHandle->IsMoveSingleHandle())
+        {
+            if(pIAOHandle->IsMoveFirstHandle())
+            {
+                pIAOHandle->SetPos(DragStat().GetRef1() + aMoveDiff);
+                if(pIAOHandle->GetColorHdl1())
+                    pIAOHandle->GetColorHdl1()->SetPos(DragStat().GetRef1() + aMoveDiff);
+            }
+            else
+            {
+                pIAOHandle->Set2ndPos(DragStat().GetRef2() + aMoveDiff);
+                if(pIAOHandle->GetColorHdl2())
+                    pIAOHandle->GetColorHdl2()->SetPos(DragStat().GetRef2() + aMoveDiff);
+            }
+        }
+        else
+        {
+            pIAOHandle->SetPos(DragStat().GetRef1() + aMoveDiff);
+            pIAOHandle->Set2ndPos(DragStat().GetRef2() + aMoveDiff);
+
+            if(pIAOHandle->GetColorHdl1())
+                pIAOHandle->GetColorHdl1()->SetPos(DragStat().GetRef1() + aMoveDiff);
+
+            if(pIAOHandle->GetColorHdl2())
+                pIAOHandle->GetColorHdl2()->SetPos(DragStat().GetRef2() + aMoveDiff);
+        }
+
+        // new state
+        pIAOHandle->FromIAOToItem(getSdrDragView().GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj(), false, false);
+    }
+}
+
+bool SdrDragGradient::EndSdrDrag(bool /*bCopy*/)
+{
+    Ref1() = pIAOHandle->GetPos();
+    Ref2() = pIAOHandle->Get2ndPos();
+
+    // new state
+    pIAOHandle->FromIAOToItem(getSdrDragView().GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj(), true, true);
+
+    return true;
+}
+
+void SdrDragGradient::CancelSdrDrag()
+{
+    // restore old values
+    pIAOHandle->SetPos(DragStat().GetRef1());
+    pIAOHandle->Set2ndPos(DragStat().GetRef2());
+
+    if(pIAOHandle->GetColorHdl1())
+        pIAOHandle->GetColorHdl1()->SetPos(DragStat().GetRef1());
+
+    if(pIAOHandle->GetColorHdl2())
+        pIAOHandle->GetColorHdl2()->SetPos(DragStat().GetRef2());
+
+    // new state
+    pIAOHandle->FromIAOToItem(getSdrDragView().GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj(), true, false);
+}
+
+PointerStyle SdrDragGradient::GetSdrDragPointer() const
+{
+    return PointerStyle::RefHand;
+}
+
+
+SdrDragCrook::SdrDragCrook(SdrDragView& rNewView)
+:   SdrDragMethod(rNewView),
+    aFact(1,1),
+    bContortionAllowed(false),
+    bNoContortionAllowed(false),
+    bContortion(false),
+    bResizeAllowed(false),
+    bResize(false),
+    bRotateAllowed(false),
+    bRotate(false),
+    bVertical(false),
+    bValid(false),
+    bLft(false),
+    bRgt(false),
+    bUpr(false),
+    bLwr(false),
+    bAtCenter(false),
+    nAngle(0),
+    nMarkSize(0),
+    eMode(SdrCrookMode::Rotate)
+{
+}
+
+OUString SdrDragCrook::GetSdrDragComment() const
+{
+    OUString aStr = ImpGetDescriptionStr(!bContortion ? STR_DragMethCrook : STR_DragMethCrookContortion);
+
+    if(bValid)
+    {
+        aStr += " (";
+
+        sal_Int32 nVal(nAngle);
+
+        if(bAtCenter)
+            nVal *= 2;
+
+        nVal = std::abs(nVal);
+        aStr += SdrModel::GetAngleString(nVal) + ")";
+    }
+
+    if(getSdrDragView().IsDragWithCopy())
+        aStr += SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+// These defines parametrize the created raster
+// for interactions
+#define DRAG_CROOK_RASTER_MINIMUM   (4)
+#define DRAG_CROOK_RASTER_MAXIMUM   (15)
+#define DRAG_CROOK_RASTER_DISTANCE  (30)
+
+static basegfx::B2DPolyPolygon impCreateDragRaster(SdrPageView const & rPageView, const tools::Rectangle& rMarkRect)
+{
+    basegfx::B2DPolyPolygon aRetval;
+
+    if(rPageView.PageWindowCount())
+    {
+        OutputDevice& rOut = rPageView.GetPageWindow(0)->GetPaintWindow().GetOutputDevice();
+        tools::Rectangle aPixelSize = rOut.LogicToPixel(rMarkRect);
+        sal_uInt32 nHorDiv(aPixelSize.GetWidth() / DRAG_CROOK_RASTER_DISTANCE);
+        sal_uInt32 nVerDiv(aPixelSize.GetHeight() / DRAG_CROOK_RASTER_DISTANCE);
+
+        if(nHorDiv > DRAG_CROOK_RASTER_MAXIMUM)
+            nHorDiv = DRAG_CROOK_RASTER_MAXIMUM;
+        if(nHorDiv < DRAG_CROOK_RASTER_MINIMUM)
+            nHorDiv = DRAG_CROOK_RASTER_MINIMUM;
+
+        if(nVerDiv > DRAG_CROOK_RASTER_MAXIMUM)
+            nVerDiv = DRAG_CROOK_RASTER_MAXIMUM;
+        if(nVerDiv < DRAG_CROOK_RASTER_MINIMUM)
+            nVerDiv = DRAG_CROOK_RASTER_MINIMUM;
+
+        const double fXLen(rMarkRect.GetWidth() / static_cast<double>(nHorDiv));
+        const double fYLen(rMarkRect.GetHeight() / static_cast<double>(nVerDiv));
+        double fYPos(rMarkRect.Top());
+        sal_uInt32 a, b;
+
+        for(a = 0; a <= nVerDiv; a++)
+        {
+            // horizontal lines
+            for(b = 0; b < nHorDiv; b++)
+            {
+                basegfx::B2DPolygon aHorLineSegment;
+
+                const double fNewX(rMarkRect.Left() + (b * fXLen));
+                aHorLineSegment.append(basegfx::B2DPoint(fNewX, fYPos));
+                aHorLineSegment.appendBezierSegment(
+                    basegfx::B2DPoint(fNewX + (fXLen * (1.0 / 3.0)), fYPos),
+                    basegfx::B2DPoint(fNewX + (fXLen * (2.0 / 3.0)), fYPos),
+                    basegfx::B2DPoint(fNewX + fXLen, fYPos));
+                aRetval.append(aHorLineSegment);
+            }
+
+            // increments
+            fYPos += fYLen;
+        }
+
+        double fXPos(rMarkRect.Left());
+
+        for(a = 0; a <= nHorDiv; a++)
+        {
+            // vertical lines
+            for(b = 0; b < nVerDiv; b++)
+            {
+                basegfx::B2DPolygon aVerLineSegment;
+
+                const double fNewY(rMarkRect.Top() + (b * fYLen));
+                aVerLineSegment.append(basegfx::B2DPoint(fXPos, fNewY));
+                aVerLineSegment.appendBezierSegment(
+                    basegfx::B2DPoint(fXPos, fNewY + (fYLen * (1.0 / 3.0))),
+                    basegfx::B2DPoint(fXPos, fNewY + (fYLen * (2.0 / 3.0))),
+                    basegfx::B2DPoint(fXPos, fNewY + fYLen));
+                aRetval.append(aVerLineSegment);
+            }
+
+            // increments
+            fXPos += fXLen;
+        }
+    }
+
+    return aRetval;
+}
+
+void SdrDragCrook::createSdrDragEntries()
+{
+    // Add extended frame raster first, so it will be behind objects
+    if(getSdrDragView().GetSdrPageView())
+    {
+        const basegfx::B2DPolyPolygon aDragRaster(impCreateDragRaster(*getSdrDragView().GetSdrPageView(), GetMarkedRect()));
+
+        if(aDragRaster.count())
+        {
+            addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntryPolyPolygon(aDragRaster)));
+        }
+    }
+
+    // call parent
+    SdrDragMethod::createSdrDragEntries();
+}
+
+bool SdrDragCrook::BeginSdrDrag()
+{
+    bContortionAllowed=getSdrDragView().IsCrookAllowed();
+    bNoContortionAllowed=getSdrDragView().IsCrookAllowed(true);
+    bResizeAllowed=getSdrDragView().IsResizeAllowed();
+    bRotateAllowed=getSdrDragView().IsRotateAllowed();
+
+    if (bContortionAllowed || bNoContortionAllowed)
+    {
+        bVertical=(GetDragHdlKind()==SdrHdlKind::Lower || GetDragHdlKind()==SdrHdlKind::Upper);
+        aMarkRect=GetMarkedRect();
+        aMarkCenter=aMarkRect.Center();
+        nMarkSize=bVertical ? (aMarkRect.GetHeight()-1) : (aMarkRect.GetWidth()-1);
+        aCenter=aMarkCenter;
+        aStart=DragStat().GetStart();
+        Show();
+        return true;
+    }
+    else
+    {
+        return false;
+    }
+}
+
+void SdrDragCrook::MovAllPoints(basegfx::B2DPolyPolygon& rTarget)
+{
+    SdrPageView* pPV = getSdrDragView().GetSdrPageView();
+
+    if(pPV)
+    {
+        XPolyPolygon aTempPolyPoly(rTarget);
+
+        if (pPV->HasMarkedObjPageView())
+        {
+            sal_uInt16 nPolyCount=aTempPolyPoly.Count();
+
+            if (!bContortion && !getSdrDragView().IsNoDragXorPolys())
+            {
+                sal_uInt16 n1st=0,nLast=0;
+                Point aC(aCenter);
+
+                while (n1st<nPolyCount)
+                {
+                    nLast=n1st;
+                    while (nLast<nPolyCount && aTempPolyPoly[nLast].GetPointCount()!=0) nLast++;
+                    tools::Rectangle aBound(aTempPolyPoly[n1st].GetBoundRect());
+                    sal_uInt16 i;
+
+                    for (i=n1st+1; i<nLast; i++)
+                    {
+                        aBound.Union(aTempPolyPoly[n1st].GetBoundRect());
+                    }
+
+                    Point aCtr0(aBound.Center());
+                    Point aCtr1(aCtr0);
+
+                    if (bResize)
+                    {
+                        Fraction aFact1(1,1);
+
+                        if (bVertical)
+                        {
+                            ResizePoint(aCtr1,aC,aFact1,aFact);
+                        }
+                        else
+                        {
+                            ResizePoint(aCtr1,aC,aFact,aFact1);
+                        }
+                    }
+
+                    bool bRotOk=false;
+                    double nSin=0,nCos=0;
+
+                    if (aRad.X()!=0 && aRad.Y()!=0)
+                    {
+                        bRotOk=bRotate;
+
+                        switch (eMode)
+                        {
+                            case SdrCrookMode::Rotate : CrookRotateXPoint (aCtr1,nullptr,nullptr,aC,aRad,nSin,nCos,bVertical);           break;
+                            case SdrCrookMode::Slant  : CrookSlantXPoint  (aCtr1,nullptr,nullptr,aC,aRad,nSin,nCos,bVertical);           break;
+                            case SdrCrookMode::Stretch: CrookStretchXPoint(aCtr1,nullptr,nullptr,aC,aRad,nSin,nCos,bVertical,aMarkRect); break;
+                        } // switch
+                    }
+
+                    aCtr1-=aCtr0;
+
+                    for (i=n1st; i<nLast; i++)
+                    {
+                        if (bRotOk)
+                        {
+                            RotateXPoly(aTempPolyPoly[i],aCtr0,nSin,nCos);
+                        }
+
+                        aTempPolyPoly[i].Move(aCtr1.X(),aCtr1.Y());
+                    }
+
+                    n1st=nLast+1;
+                }
+            }
+            else
+            {
+                sal_uInt16 i,j;
+
+                for (j=0; j<nPolyCount; j++)
+                {
+                    XPolygon& aPol=aTempPolyPoly[j];
+                    sal_uInt16 nPointCount=aPol.GetPointCount();
+                    i=0;
+
+                    while (i<nPointCount)
+                    {
+                        Point* pPnt=&aPol[i];
+                        Point* pC1=nullptr;
+                        Point* pC2=nullptr;
+
+                        if (i+1<nPointCount && aPol.IsControl(i))
+                        { // control point on the left
+                            pC1=pPnt;
+                            i++;
+                            pPnt=&aPol[i];
+                        }
+
+                        i++;
+
+                        if (i<nPointCount && aPol.IsControl(i))
+                        { // control point on the right
+                            pC2=&aPol[i];
+                            i++;
+                        }
+
+                        MovCrookPoint(*pPnt,pC1,pC2);
+                    }
+                }
+            }
+        }
+
+        rTarget = aTempPolyPoly.getB2DPolyPolygon();
+    }
+}
+
+void SdrDragCrook::MovCrookPoint(Point& rPnt, Point* pC1, Point* pC2)
+{
+    bool bVert=bVertical;
+    bool bC1=pC1!=nullptr;
+    bool bC2=pC2!=nullptr;
+    Point aC(aCenter);
+
+    if (bResize)
+    {
+        Fraction aFact1(1,1);
+
+        if (bVert)
+        {
+            ResizePoint(rPnt,aC,aFact1,aFact);
+
+            if (bC1)
+                ResizePoint(*pC1,aC,aFact1,aFact);
+
+            if (bC2)
+                ResizePoint(*pC2,aC,aFact1,aFact);
+        }
+        else
+        {
+            ResizePoint(rPnt,aC,aFact,aFact1);
+
+            if (bC1)
+                ResizePoint(*pC1,aC,aFact,aFact1);
+
+            if (bC2)
+                ResizePoint(*pC2,aC,aFact,aFact1);
+        }
+    }
+
+    if (aRad.X()!=0 && aRad.Y()!=0)
+    {
+        double nSin,nCos;
+
+        switch (eMode)
+        {
+            case SdrCrookMode::Rotate : CrookRotateXPoint (rPnt,pC1,pC2,aC,aRad,nSin,nCos,bVert);           break;
+            case SdrCrookMode::Slant  : CrookSlantXPoint  (rPnt,pC1,pC2,aC,aRad,nSin,nCos,bVert);           break;
+            case SdrCrookMode::Stretch: CrookStretchXPoint(rPnt,pC1,pC2,aC,aRad,nSin,nCos,bVert,aMarkRect); break;
+        } // switch
+    }
+}
+
+void SdrDragCrook::MoveSdrDrag(const Point& rPnt)
+{
+    if (!DragStat().CheckMinMoved(rPnt))
+        return;
+
+    bool bNewMoveOnly=getSdrDragView().IsMoveOnlyDragging();
+    bAtCenter=false;
+    SdrCrookMode eNewMode=getSdrDragView().GetCrookMode();
+    bool bNewContortion=!bNewMoveOnly && ((bContortionAllowed && !getSdrDragView().IsCrookNoContortion()) || !bNoContortionAllowed);
+    bResize=!getSdrDragView().IsOrtho() && bResizeAllowed && !bNewMoveOnly;
+    bool bNewRotate=bRotateAllowed && !bNewContortion && !bNewMoveOnly && eNewMode==SdrCrookMode::Rotate;
+
+    Point aPnt(GetSnapPos(rPnt));
+
+    Point aNewCenter(aMarkCenter.X(),aStart.Y());
+
+    if (bVertical)
+    {
+        aNewCenter.setX(aStart.X() );
+        aNewCenter.setY(aMarkCenter.Y() );
+    }
+
+    if (!getSdrDragView().IsCrookAtCenter())
+    {
+        switch (GetDragHdlKind())
+        {
+            case SdrHdlKind::UpperLeft: aNewCenter.setX(aMarkRect.Right() );  bLft=true; break;
+            case SdrHdlKind::Upper: aNewCenter.setY(aMarkRect.Bottom() ); bUpr=true; break;
+            case SdrHdlKind::UpperRight: aNewCenter.setX(aMarkRect.Left() );   bRgt=true; break;
+            case SdrHdlKind::Left : aNewCenter.setX(aMarkRect.Right() );  bLft=true; break;
+            case SdrHdlKind::Right: aNewCenter.setX(aMarkRect.Left() );   bRgt=true; break;
+            case SdrHdlKind::LowerLeft: aNewCenter.setX(aMarkRect.Right() );  bLft=true; break;
+            case SdrHdlKind::Lower: aNewCenter.setY(aMarkRect.Top() );    bLwr=true; break;
+            case SdrHdlKind::LowerRight: aNewCenter.setX(aMarkRect.Left() );   bRgt=true; break;
+            default: bAtCenter=true;
+        }
+    }
+    else
+        bAtCenter=true;
+
+    Fraction aNewFract(1,1);
+    long dx1=aPnt.X()-aNewCenter.X();
+    long dy1=aPnt.Y()-aNewCenter.Y();
+    bValid=bVertical ? dx1!=0 : dy1!=0;
+
+    if (bValid)
+    {
+        if (bVertical)
+            bValid = std::abs(dx1)*100>std::abs(dy1);
+        else
+            bValid = std::abs(dy1)*100>std::abs(dx1);
+    }
+
+    long nNewRad=0;
+    nAngle=0;
+
+    if (bValid)
+    {
+        double a=0; // slope of the radius
+        long nPntWink=0;
+
+        if (bVertical)
+        {
+            a=static_cast<double>(dy1)/static_cast<double>(dx1); // slope of the radius
+            nNewRad=(static_cast<long>(dy1*a)+dx1) /2;
+            aNewCenter.AdjustX(nNewRad );
+            nPntWink=GetAngle(aPnt-aNewCenter);
+        }
+        else
+        {
+            a=static_cast<double>(dx1)/static_cast<double>(dy1); // slope of the radius
+            nNewRad=(static_cast<long>(dx1*a)+dy1) /2;
+            aNewCenter.AdjustY(nNewRad );
+            nPntWink=GetAngle(aPnt-aNewCenter)-9000;
+        }
+
+        if (!bAtCenter)
+        {
+            if (nNewRad<0)
+            {
+                if (bRgt) nPntWink+=18000;
+                if (bLft) nPntWink=18000-nPntWink;
+                if (bLwr) nPntWink=-nPntWink;
+            }
+            else
+            {
+                if (bRgt) nPntWink=-nPntWink;
+                if (bUpr) nPntWink=18000-nPntWink;
+                if (bLwr) nPntWink+=18000;
+            }
+
+            nPntWink=NormAngle36000(nPntWink);
+        }
+        else
+        {
+            if (nNewRad<0) nPntWink+=18000;
+            if (bVertical) nPntWink=18000-nPntWink;
+            nPntWink=NormAngle18000(nPntWink);
+            nPntWink = std::abs(nPntWink);
+        }
+
+        double nUmfang = 2 * std::abs(nNewRad) * M_PI;
+
+        if (bResize)
+        {
+            long nMul=static_cast<long>(nUmfang*NormAngle36000(nPntWink)/36000);
+
+            if (bAtCenter)
+                nMul*=2;
+
+            aNewFract=Fraction(nMul,nMarkSize);
+            nAngle=nPntWink;
+        }
+        else
+        {
+            nAngle=static_cast<long>((nMarkSize*360/nUmfang)*100)/2;
+
+            if (nAngle==0)
+                bValid=false;
+        }
+    }
+
+    if (nAngle==0 || nNewRad==0)
+        bValid=false;
+
+    if (!bValid)
+        nNewRad=0;
+
+    if (!bValid && bResize)
+    {
+        long nMul=bVertical ? dy1 : dx1;
+
+        if (bLft || bUpr)
+            nMul=-nMul;
+
+        long nDiv=nMarkSize;
+
+        if (bAtCenter)
+        {
+            nMul*=2;
+            nMul = std::abs(nMul);
+        }
+
+        aNewFract=Fraction(nMul,nDiv);
+    }
+
+    if (aNewCenter==aCenter && bNewContortion==bContortion && aNewFract==aFact &&
+        bNewMoveOnly == getMoveOnly() && bNewRotate==bRotate && eNewMode==eMode)
+        return;
+
+    Hide();
+    setMoveOnly(bNewMoveOnly);
+    bRotate=bNewRotate;
+    eMode=eNewMode;
+    bContortion=bNewContortion;
+    aCenter=aNewCenter;
+    aFact=aNewFract;
+    aRad=Point(nNewRad,nNewRad);
+    bResize=aFact!=Fraction(1,1) && aFact.GetDenominator()!=0 && aFact.IsValid();
+    DragStat().NextMove(aPnt);
+    Show();
+}
+
+void SdrDragCrook::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    const bool bDoResize(aFact!=Fraction(1,1));
+    const bool bDoCrook(aCenter!=aMarkCenter && aRad.X()!=0 && aRad.Y()!=0);
+
+    if (bDoCrook || bDoResize)
+    {
+        if (bDoResize)
+        {
+            Fraction aFact1(1,1);
+
+            if (bContortion)
+            {
+                if (bVertical)
+                {
+                    rTarget.Resize(aCenter,aFact1,aFact);
+                }
+                else
+                {
+                    rTarget.Resize(aCenter,aFact,aFact1);
+                }
+            }
+            else
+            {
+                Point aCtr0(rTarget.GetSnapRect().Center());
+                Point aCtr1(aCtr0);
+
+                if (bVertical)
+                {
+                    ResizePoint(aCtr1,aCenter,aFact1,aFact);
+                }
+                else
+                {
+                    ResizePoint(aCtr1,aCenter,aFact,aFact1);
+                }
+
+                Size aSiz(aCtr1.X()-aCtr0.X(),aCtr1.Y()-aCtr0.Y());
+
+                rTarget.Move(aSiz);
+            }
+        }
+
+        if (bDoCrook)
+        {
+            const tools::Rectangle aLocalMarkRect(getSdrDragView().GetMarkedObjRect());
+            const bool bLocalRotate(!bContortion && eMode == SdrCrookMode::Rotate && getSdrDragView().IsRotateAllowed());
+
+            SdrEditView::ImpCrookObj(&rTarget,aCenter,aRad,eMode,bVertical,!bContortion,bLocalRotate,aLocalMarkRect);
+        }
+    }
+}
+
+void SdrDragCrook::applyCurrentTransformationToPolyPolygon(basegfx::B2DPolyPolygon& rTarget)
+{
+    // use helper derived from old stuff
+    MovAllPoints(rTarget);
+}
+
+bool SdrDragCrook::EndSdrDrag(bool bCopy)
+{
+    Hide();
+
+    if (bResize && aFact==Fraction(1,1))
+        bResize=false;
+
+    const bool bUndo = getSdrDragView().IsUndoEnabled();
+
+    bool bDoCrook=aCenter!=aMarkCenter && aRad.X()!=0 && aRad.Y()!=0;
+
+    if (bDoCrook || bResize)
+    {
+        if (bResize && bUndo)
+        {
+            OUString aStr = ImpGetDescriptionStr(!bContortion?STR_EditCrook:STR_EditCrookContortion);
+
+            if (bCopy)
+                aStr += SvxResId(STR_EditWithCopy);
+
+            getSdrDragView().BegUndo(aStr);
+        }
+
+        if (bResize)
+        {
+            Fraction aFact1(1,1);
+
+            if (bContortion)
+            {
+                if (bVertical)
+                    getSdrDragView().ResizeMarkedObj(aCenter,aFact1,aFact,bCopy);
+                else
+                    getSdrDragView().ResizeMarkedObj(aCenter,aFact,aFact1,bCopy);
+            }
+            else
+            {
+                if (bCopy)
+                    getSdrDragView().CopyMarkedObj();
+
+                const size_t nMarkCount=getSdrDragView().GetMarkedObjectList().GetMarkCount();
+
+                for (size_t nm=0; nm<nMarkCount; ++nm)
+                {
+                    SdrMark* pM=getSdrDragView().GetMarkedObjectList().GetMark(nm);
+                    SdrObject* pO=pM->GetMarkedSdrObj();
+                    Point aCtr0(pO->GetSnapRect().Center());
+                    Point aCtr1(aCtr0);
+
+                    if (bVertical)
+                        ResizePoint(aCtr1,aCenter,aFact1,aFact);
+                    else
+                        ResizePoint(aCtr1,aCenter,aFact,aFact1);
+
+                    Size aSiz(aCtr1.X()-aCtr0.X(),aCtr1.Y()-aCtr0.Y());
+                    if( bUndo )
+                        AddUndo(getSdrDragView().GetModel()->GetSdrUndoFactory().CreateUndoMoveObject(*pO,aSiz));
+                    pO->Move(aSiz);
+                }
+            }
+
+            bCopy=false;
+        }
+
+        if (bDoCrook)
+        {
+            getSdrDragView().CrookMarkedObj(aCenter,aRad,eMode,bVertical,!bContortion,bCopy);
+        }
+
+        if (bResize && bUndo)
+            getSdrDragView().EndUndo();
+
+        return true;
+    }
+
+    return false;
+}
+
+PointerStyle SdrDragCrook::GetSdrDragPointer() const
+{
+    return PointerStyle::Crook;
+}
+
+
+SdrDragDistort::SdrDragDistort(SdrDragView& rNewView)
+:   SdrDragMethod(rNewView),
+    nPolyPt(0),
+    bContortionAllowed(false),
+    bNoContortionAllowed(false),
+    bContortion(false)
+{
+}
+
+OUString SdrDragDistort::GetSdrDragComment() const
+{
+    OUString aStr = ImpGetDescriptionStr(STR_DragMethDistort)
+            + " (x="
+            + getSdrDragView().GetModel()->GetMetricString(DragStat().GetDX())
+            + " y="
+            + getSdrDragView().GetModel()->GetMetricString(DragStat().GetDY())
+            + ")";
+
+    if(getSdrDragView().IsDragWithCopy())
+        aStr += SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+void SdrDragDistort::createSdrDragEntries()
+{
+    // Add extended frame raster first, so it will be behind objects
+    if(getSdrDragView().GetSdrPageView())
+    {
+        const basegfx::B2DPolyPolygon aDragRaster(impCreateDragRaster(*getSdrDragView().GetSdrPageView(), GetMarkedRect()));
+
+        if(aDragRaster.count())
+        {
+            addSdrDragEntry(std::unique_ptr<SdrDragEntry>(new SdrDragEntryPolyPolygon(aDragRaster)));
+        }
+    }
+
+    // call parent
+    SdrDragMethod::createSdrDragEntries();
+}
+
+bool SdrDragDistort::BeginSdrDrag()
+{
+    bContortionAllowed=getSdrDragView().IsDistortAllowed();
+    bNoContortionAllowed=getSdrDragView().IsDistortAllowed(true);
+
+    if (bContortionAllowed || bNoContortionAllowed)
+    {
+        SdrHdlKind eKind=GetDragHdlKind();
+        nPolyPt=0xFFFF;
+
+        if (eKind==SdrHdlKind::UpperLeft) nPolyPt=0;
+        if (eKind==SdrHdlKind::UpperRight) nPolyPt=1;
+        if (eKind==SdrHdlKind::LowerRight) nPolyPt=2;
+        if (eKind==SdrHdlKind::LowerLeft) nPolyPt=3;
+        if (nPolyPt>3) return false;
+
+        aMarkRect=GetMarkedRect();
+        aDistortedRect=XPolygon(aMarkRect);
+        Show();
+        return true;
+    }
+    else
+    {
+        return false;
+    }
+}
+
+void SdrDragDistort::MovAllPoints(basegfx::B2DPolyPolygon& rTarget)
+{
+    if (bContortion)
+    {
+        SdrPageView* pPV = getSdrDragView().GetSdrPageView();
+
+        if(pPV && pPV->HasMarkedObjPageView())
+        {
+            basegfx::B2DPolyPolygon aDragPolygon(rTarget);
+            const basegfx::B2DRange aOriginalRange = vcl::unotools::b2DRectangleFromRectangle(aMarkRect);
+            const basegfx::B2DPoint aTopLeft(aDistortedRect[0].X(), aDistortedRect[0].Y());
+            const basegfx::B2DPoint aTopRight(aDistortedRect[1].X(), aDistortedRect[1].Y());
+            const basegfx::B2DPoint aBottomLeft(aDistortedRect[3].X(), aDistortedRect[3].Y());
+            const basegfx::B2DPoint aBottomRight(aDistortedRect[2].X(), aDistortedRect[2].Y());
+
+            aDragPolygon = basegfx::utils::distort(aDragPolygon, aOriginalRange, aTopLeft, aTopRight, aBottomLeft, aBottomRight);
+            rTarget = aDragPolygon;
+        }
+    }
+}
+
+void SdrDragDistort::MoveSdrDrag(const Point& rPnt)
+{
+    if (DragStat().CheckMinMoved(rPnt))
+    {
+        Point aPnt(GetSnapPos(rPnt));
+
+        if (getSdrDragView().IsOrtho())
+            OrthoDistance8(DragStat().GetStart(),aPnt,getSdrDragView().IsBigOrtho());
+
+        bool bNewContortion=(bContortionAllowed && !getSdrDragView().IsCrookNoContortion()) || !bNoContortionAllowed;
+
+        if (bNewContortion!=bContortion || aDistortedRect[nPolyPt]!=aPnt)
+        {
+            Hide();
+            aDistortedRect[nPolyPt]=aPnt;
+            bContortion=bNewContortion;
+            DragStat().NextMove(aPnt);
+            Show();
+        }
+    }
+}
+
+bool SdrDragDistort::EndSdrDrag(bool bCopy)
+{
+    Hide();
+    bool bDoDistort=DragStat().GetDX()!=0 || DragStat().GetDY()!=0;
+
+    if (bDoDistort)
+    {
+        getSdrDragView().DistortMarkedObj(aMarkRect,aDistortedRect,!bContortion,bCopy);
+        return true;
+    }
+
+    return false;
+}
+
+PointerStyle SdrDragDistort::GetSdrDragPointer() const
+{
+    return PointerStyle::RefHand;
+}
+
+void SdrDragDistort::applyCurrentTransformationToSdrObject(SdrObject& rTarget)
+{
+    const bool bDoDistort(DragStat().GetDX()!=0 || DragStat().GetDY()!=0);
+
+    if (bDoDistort)
+    {
+        SdrEditView::ImpDistortObj(&rTarget, aMarkRect, aDistortedRect, !bContortion);
+    }
+}
+
+void SdrDragDistort::applyCurrentTransformationToPolyPolygon(basegfx::B2DPolyPolygon& rTarget)
+{
+    // use helper derived from old stuff
+    MovAllPoints(rTarget);
+}
+
+
+SdrDragCrop::SdrDragCrop(SdrDragView& rNewView)
+:   SdrDragObjOwn(rNewView)
+{
+    // switch off solid dragging for crop; it just makes no sense since showing
+    // a 50% transparent object above the original will not be visible
+    setSolidDraggingActive(false);
+}
+
+OUString SdrDragCrop::GetSdrDragComment() const
+{
+    OUString aStr = ImpGetDescriptionStr(STR_DragMethCrop)
+            + " (x="
+            + getSdrDragView().GetModel()->GetMetricString(DragStat().GetDX())
+            + " y="
+            + getSdrDragView().GetModel()->GetMetricString(DragStat().GetDY())
+            + ")";
+
+    if(getSdrDragView().IsDragWithCopy())
+        aStr += SvxResId(STR_EditWithCopy);
+    return aStr;
+}
+
+bool SdrDragCrop::BeginSdrDrag()
+{
+    // call parent
+    bool bRetval(SdrDragObjOwn::BeginSdrDrag());
+
+    if(!GetDragHdl())
+    {
+        // we need the DragHdl, break if not there
+        bRetval = false;
+    }
+
+    return bRetval;
+}
+
+bool SdrDragCrop::EndSdrDrag(bool /*bCopy*/)
+{
+    Hide();
+
+    if(0 == DragStat().GetDX() && 0 == DragStat().GetDY())
+    {
+        // no change, done
+        return false;
+    }
+
+    const SdrMarkList& rMarkList = getSdrDragView().GetMarkedObjectList();
+
+    if(1 != rMarkList.GetMarkCount())
+    {
+        // Crop only with single Object selected
+        return false;
+    }
+
+    // prepare for SdrGrafObj or others. This code has to work with usual
+    // SdrGrafObj's from Draw/Impress/Calc, but also with SdrObjects from
+    // Writer. It would be better to handle this in Writer directly, but
+    // there are currently no easy mechanisms to plug an alternative interaction
+    // from there
+    SdrObject* pSdrObject = rMarkList.GetMark(0)->GetMarkedSdrObj();
+    SdrObjectUniquePtr pFullDragClone;
+    bool bExternal(false);
+    SdrObject* pExternalSdrObject(nullptr);
+
+    // RotGrfFlyFrame: Crop decision for DrawingLayer/Writer now
+    // locally, no two-in-one methods any more
+    if (nullptr != pSdrObject && dynamic_cast< const SdrGrafObj* >(pSdrObject) ==  nullptr)
+    {
+        // If Writer, get the already offered for interaction SdrGrafObj
+        // and set up for using that replacement object that contains the
+        // real transformation. That SdrObject is owned and has to be deleted,
+        // so use a std::unique_ptr with special handling for the protected
+        // SDrObject destructor
+        pFullDragClone = pSdrObject->getFullDragClone();
+
+        if(dynamic_cast< SdrGrafObj* >(pFullDragClone.get()))
+        {
+            bExternal = true;
+            pExternalSdrObject = pSdrObject;
+            pSdrObject = pFullDragClone.get();
+        }
+    }
+
+    // get and check for SdrGrafObj now
+    SdrGrafObj* pObj = dynamic_cast<SdrGrafObj*>( pSdrObject );
+
+    if(!pObj)
+    {
+        return false;
+    }
+
+    // no undo for external needed, done there
+    const bool bUndo(!bExternal && getSdrDragView().IsUndoEnabled());
+
+    if(bUndo)
+    {
+        OUString aUndoStr = ImpGetDescriptionStr(STR_DragMethCrop);
+
+        getSdrDragView().BegUndo( aUndoStr );
+        getSdrDragView().AddUndo( getSdrDragView().GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+        // also need attr undo, the SdrGrafCropItem will be changed
+        getSdrDragView().AddUndo( getSdrDragView().GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj));
+    }
+
+    // get the original objects transformation
+    basegfx::B2DHomMatrix aOriginalMatrix;
+    basegfx::B2DPolyPolygon aPolyPolygon;
+    bool bShearCorrected(false);
+    pObj->TRGetBaseGeometry(aOriginalMatrix, aPolyPolygon);
+
+    {   // correct shear, it comes currently mirrored from TRGetBaseGeometry, can be removed with aw080
+        const basegfx::utils::B2DHomMatrixBufferedDecompose aTmpDecomp(aOriginalMatrix);
+
+        if(!basegfx::fTools::equalZero(aTmpDecomp.getShearX()))
+        {
+            bShearCorrected = true;
+            aOriginalMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+                aTmpDecomp.getScale(),
+                -aTmpDecomp.getShearX(),
+                aTmpDecomp.getRotate(),
+                aTmpDecomp.getTranslate());
+        }
+    }
+
+    // generate start point of original drag vector in unit coordinates (the
+    // vis-a-vis of the drag point)
+    basegfx::B2DPoint aLocalStart(0.0, 0.0);
+    bool bOnAxis(false);
+
+    switch(GetDragHdlKind())
+    {
+        case SdrHdlKind::UpperLeft: aLocalStart.setX(1.0); aLocalStart.setY(1.0); break;
+        case SdrHdlKind::Upper: aLocalStart.setX(0.5); aLocalStart.setY(1.0); bOnAxis = true; break;
+        case SdrHdlKind::UpperRight: aLocalStart.setX(0.0); aLocalStart.setY(1.0); break;
+        case SdrHdlKind::Left : aLocalStart.setX(1.0); aLocalStart.setY(0.5); bOnAxis = true; break;
+        case SdrHdlKind::Right: aLocalStart.setX(0.0); aLocalStart.setY(0.5); bOnAxis = true; break;
+        case SdrHdlKind::LowerLeft: aLocalStart.setX(1.0); aLocalStart.setY(0.0); break;
+        case SdrHdlKind::Lower: aLocalStart.setX(0.5); aLocalStart.setY(0.0); bOnAxis = true; break;
+        case SdrHdlKind::LowerRight: aLocalStart.setX(0.0); aLocalStart.setY(0.0); break;
+        default: break;
+    }
+
+    // create the current drag position in unit coordinates. To get there,
+    // transform back the DragPoint to UnitCoordinates
+    basegfx::B2DHomMatrix aInverse(aOriginalMatrix);
+    aInverse.invert();
+    basegfx::B2DPoint aLocalCurrent(aInverse * basegfx::B2DPoint(DragStat().GetNow().X(), DragStat().GetNow().Y()));
+
+    // if one of the edge handles is used, limit to X or Y drag only
+    if(bOnAxis)
+    {
+        if(basegfx::fTools::equal(aLocalStart.getX(), 0.5))
+        {
+            aLocalCurrent.setX(aLocalStart.getX());
+        }
+        else
+        {
+            aLocalCurrent.setY(aLocalStart.getY());
+        }
+    }
+
+    // create internal change in unit coordinates
+    basegfx::B2DHomMatrix aDiscreteChangeMatrix;
+
+    if(!basegfx::fTools::equal(aLocalCurrent.getX(), aLocalStart.getX()))
+    {
+        if(aLocalStart.getX() < 0.5)
+        {
+            aDiscreteChangeMatrix.scale(aLocalCurrent.getX(), 1.0);
+        }
+        else
+        {
+            aDiscreteChangeMatrix.scale(1.0 - aLocalCurrent.getX(), 1.0);
+            aDiscreteChangeMatrix.translate(aLocalCurrent.getX(), 0.0);
+        }
+    }
+
+    if(!basegfx::fTools::equal(aLocalCurrent.getY(), aLocalStart.getY()))
+    {
+        if(aLocalStart.getY() < 0.5)
+        {
+            aDiscreteChangeMatrix.scale(1.0, aLocalCurrent.getY());
+        }
+        else
+        {
+            aDiscreteChangeMatrix.scale(1.0, 1.0 - aLocalCurrent.getY());
+            aDiscreteChangeMatrix.translate(0.0, aLocalCurrent.getY());
+        }
+    }
+
+    // We now have the whole executed Crop in UnitCoordinates in
+    // aDiscreteChangeMatrix, go to concrete sizes now.
+    // Create the unrotated original rectangle and the unrotated modified
+    // rectangle as Ranges
+    const basegfx::utils::B2DHomMatrixBufferedDecompose aOriginalMatrixDecomp(aOriginalMatrix);
+
+    // prepare unsheared/unrotated versions of the old and new transformation
+    const basegfx::B2DHomMatrix aOriginalMatrixNoShearNoRotate(
+        basegfx::utils::createScaleTranslateB2DHomMatrix(
+            basegfx::absolute(aOriginalMatrixDecomp.getScale()),
+            aOriginalMatrixDecomp.getTranslate()));
+
+    // create the ranges for these
+    basegfx::B2DRange aRangeOriginalNoShearNoRotate(0.0, 0.0, 1.0, 1.0);
+    basegfx::B2DRange aRangeNewNoShearNoRotate(0.0, 0.0, 1.0, 1.0);
+    aRangeOriginalNoShearNoRotate.transform(aOriginalMatrixNoShearNoRotate);
+    aRangeNewNoShearNoRotate.transform(aOriginalMatrixNoShearNoRotate * aDiscreteChangeMatrix);
+
+    if(bExternal)
+    {
+        // With aLocalStart point (opposed to dragged point), X scale and Y scale,
+        // we call crop (virtual method) on pSdrObject which calls VirtFlyDrawObj
+        // crop. Use aLocalStart unchanged, so being relative to the Crop-Action,
+        // the called instance knows best how to use it
+        const double fScaleX(aRangeNewNoShearNoRotate.getWidth() / aRangeOriginalNoShearNoRotate.getWidth());
+        const double fScaleY(aRangeNewNoShearNoRotate.getHeight() / aRangeOriginalNoShearNoRotate.getHeight());
+
+        pExternalSdrObject->Crop(
+            aLocalStart,
+            fScaleX,
+            fScaleY);
+    }
+    else
+    {
+        // prepare matrix to apply to object; evtl. back-correct shear
+        basegfx::B2DHomMatrix aNewObjectMatrix(aOriginalMatrix * aDiscreteChangeMatrix);
+
+        if(bShearCorrected)
+        {
+            // back-correct shear
+            const basegfx::utils::B2DHomMatrixBufferedDecompose aTmpDecomp(aNewObjectMatrix);
+
+            aNewObjectMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+                aTmpDecomp.getScale(),
+                -aTmpDecomp.getShearX(),
+                aTmpDecomp.getRotate(),
+                aTmpDecomp.getTranslate());
+        }
+
+        // apply change to object by applying the unit coordinate change followed
+        // by the original change
+        pObj->TRSetBaseGeometry(aNewObjectMatrix, aPolyPolygon);
+
+        // extract the old Rectangle structures
+        tools::Rectangle aOldRect(
+            basegfx::fround(aRangeOriginalNoShearNoRotate.getMinX()),
+            basegfx::fround(aRangeOriginalNoShearNoRotate.getMinY()),
+            basegfx::fround(aRangeOriginalNoShearNoRotate.getMaxX()),
+            basegfx::fround(aRangeOriginalNoShearNoRotate.getMaxY()));
+        tools::Rectangle aNewRect(
+            basegfx::fround(aRangeNewNoShearNoRotate.getMinX()),
+            basegfx::fround(aRangeNewNoShearNoRotate.getMinY()),
+            basegfx::fround(aRangeNewNoShearNoRotate.getMaxX()),
+            basegfx::fround(aRangeNewNoShearNoRotate.getMaxY()));
+
+        // continue with the old original stuff
+        if (!aOldRect.GetWidth() || !aOldRect.GetHeight())
+        {
+            throw o3tl::divide_by_zero();
+        }
+
+        if((pObj->GetGraphicType() == GraphicType::NONE) || (pObj->GetGraphicType() == GraphicType::Default))
+        {
+            return false;
+        }
+
+        const GraphicObject& rGraphicObject(pObj->GetGraphicObject());
+        // tdf#117145 Usually Writer will go the bExternal path (see above), but more correct for
+        // the future is to use the MapMode from the SdrModel/SfxItemPool if the Writer's current
+        // special handling should be unified to this path in the future. Usually it *should* be
+        // MapUnit::Map100thMM, but better do not mix up Units.
+        // Checked now what SwVirtFlyDrawObj::NbcCrop is doing - it calculates everything forced
+        // to MapUnit::Map100thMM, but extracts/packs Twips to the used SdrGrafCropItem in Writer.
+        const MapMode aMapModePool(pObj->getSdrModelFromSdrObject().GetItemPool().GetMetric(0));
+        Size aGraphicSize(rGraphicObject.GetPrefSize());
+
+        if(MapUnit::MapPixel == rGraphicObject.GetPrefMapMode().GetMapUnit())
+        {
+            aGraphicSize = Application::GetDefaultDevice()->PixelToLogic(aGraphicSize, aMapModePool);
+        }
+        else
+        {
+            aGraphicSize = OutputDevice::LogicToLogic(aGraphicSize, rGraphicObject.GetPrefMapMode(), aMapModePool);
+        }
+
+        if(0 == aGraphicSize.Width() || 0 == aGraphicSize.Height())
+        {
+            return false;
+        }
+
+        const SdrGrafCropItem& rOldCrop = pObj->GetMergedItem(SDRATTR_GRAFCROP);
+        double fScaleX = ( aGraphicSize.Width() - rOldCrop.GetLeft() - rOldCrop.GetRight() ) / static_cast<double>(aOldRect.GetWidth());
+        double fScaleY = ( aGraphicSize.Height() - rOldCrop.GetTop() - rOldCrop.GetBottom() ) / static_cast<double>(aOldRect.GetHeight());
+
+        sal_Int32 nDiffLeft = aNewRect.Left() - aOldRect.Left();
+        sal_Int32 nDiffTop = aNewRect.Top() - aOldRect.Top();
+        sal_Int32 nDiffRight = aNewRect.Right() - aOldRect.Right();
+        sal_Int32 nDiffBottom = aNewRect.Bottom() - aOldRect.Bottom();
+
+        if(pObj->IsMirrored())
+        {
+            // mirrored X or Y, for old stuff, exchange X
+            // check for aw080
+            sal_Int32 nTmp(nDiffLeft);
+            nDiffLeft = -nDiffRight;
+            nDiffRight = -nTmp;
+        }
+
+        sal_Int32 nLeftCrop = static_cast<sal_Int32>( rOldCrop.GetLeft() + nDiffLeft * fScaleX );
+        sal_Int32 nTopCrop = static_cast<sal_Int32>( rOldCrop.GetTop() + nDiffTop * fScaleY );
+        sal_Int32 nRightCrop = static_cast<sal_Int32>( rOldCrop.GetRight() - nDiffRight * fScaleX );
+        sal_Int32 nBottomCrop = static_cast<sal_Int32>( rOldCrop.GetBottom() - nDiffBottom * fScaleY );
+
+        SfxItemPool& rPool = getSdrDragView().GetModel()->GetItemPool();
+        SfxItemSet aSet( rPool, svl::Items<SDRATTR_GRAFCROP, SDRATTR_GRAFCROP>{} );
+        aSet.Put( SdrGrafCropItem( nLeftCrop, nTopCrop, nRightCrop, nBottomCrop ) );
+        getSdrDragView().SetAttributes( aSet, false );
+    }
+
+    if(bUndo)
+    {
+        getSdrDragView().EndUndo();
+    }
+
+    return true;
+}
+
+PointerStyle SdrDragCrop::GetSdrDragPointer() const
+{
+    return PointerStyle::Crop;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svddrgv.cxx b/svx/source/svdraw/svddrgv.cxx
new file mode 100644
index 000000000..7002f9447
--- /dev/null
+++ b/svx/source/svdraw/svddrgv.cxx
@@ -0,0 +1,925 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <tools/debug.hxx>
+#include <svx/svddrgv.hxx>
+#include <svx/svdview.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdocapt.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include "svddrgm1.hxx"
+#include <svx/obj3d.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <svx/sdrpagewindow.hxx>
+
+using namespace sdr;
+
+
+// DragView
+
+
+void SdrDragView::ImpClearVars()
+{
+    mbFramDrag=false;
+    meDragMode=SdrDragMode::Move;
+    mbDragLimit=false;
+    mbMarkedHitMovesAlways=false;
+    meDragHdl=SdrHdlKind::Move;
+    mpDragHdl=nullptr;
+    mbDragHdl=false;
+    mpCurrentSdrDragMethod=nullptr;
+    mbDragStripes=false;
+    mbDragWithCopy=false;
+    mpInsPointUndo=nullptr;
+    mbInsGluePoint=false;
+    mbInsObjPointMode=false;
+    mbInsGluePointMode=false;
+    mbNoDragXorPolys=false;
+    mbResizeAtCenter=false;
+    mbCrookAtCenter=false;
+
+    // init using default
+    mbSolidDragging = getOptionsDrawinglayer().IsSolidDragCreate();
+}
+
+SdrDragView::SdrDragView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrExchangeView(rSdrModel, pOut)
+{
+    ImpClearVars();
+}
+
+SdrDragView::~SdrDragView()
+{
+}
+
+bool SdrDragView::IsAction() const
+{
+    return (mpCurrentSdrDragMethod || SdrExchangeView::IsAction());
+}
+
+void SdrDragView::MovAction(const Point& rPnt)
+{
+    SdrExchangeView::MovAction(rPnt);
+    if (mpCurrentSdrDragMethod)
+    {
+        MovDragObj(rPnt);
+    }
+}
+
+void SdrDragView::EndAction()
+{
+    if (mpCurrentSdrDragMethod)
+    {
+        EndDragObj();
+    }
+    SdrExchangeView::EndAction();
+}
+
+void SdrDragView::BckAction()
+{
+    SdrExchangeView::BckAction();
+    BrkDragObj();
+}
+
+void SdrDragView::BrkAction()
+{
+    SdrExchangeView::BrkAction();
+    BrkDragObj();
+}
+
+void SdrDragView::TakeActionRect(tools::Rectangle& rRect) const
+{
+    if (mpCurrentSdrDragMethod)
+    {
+        rRect=maDragStat.GetActionRect();
+        if (rRect.IsEmpty())
+        {
+            SdrPageView* pPV = GetSdrPageView();
+
+            if(pPV&& pPV->HasMarkedObjPageView())
+            {
+                // #i95646# is this used..?
+                const basegfx::B2DRange aBoundRange(mpCurrentSdrDragMethod->getCurrentRange());
+                if (aBoundRange.isEmpty())
+                {
+                    rRect.SetEmpty();
+                }
+                else
+                {
+                    rRect = tools::Rectangle(
+                        basegfx::fround(aBoundRange.getMinX()), basegfx::fround(aBoundRange.getMinY()),
+                        basegfx::fround(aBoundRange.getMaxX()), basegfx::fround(aBoundRange.getMaxY()));
+                }
+            }
+        }
+        if (rRect.IsEmpty())
+        {
+            rRect=tools::Rectangle(maDragStat.GetNow(),maDragStat.GetNow());
+        }
+    }
+    else
+    {
+        SdrExchangeView::TakeActionRect(rRect);
+    }
+}
+
+bool SdrDragView::TakeDragObjAnchorPos(Point& rPos, bool bTR ) const
+{
+    tools::Rectangle aR;
+    TakeActionRect(aR);
+    rPos = bTR ? aR.TopRight() : aR.TopLeft();
+    if (GetMarkedObjectCount()==1 && IsDragObj() && // only on single selection
+        !IsDraggingPoints() && !IsDraggingGluePoints() && // not when moving points
+        dynamic_cast<const SdrDragMovHdl*>( mpCurrentSdrDragMethod.get() ) ==  nullptr) // not when moving handles
+    {
+        SdrObject* pObj=GetMarkedObjectByIndex(0);
+        if (dynamic_cast<const SdrCaptionObj*>( pObj) !=  nullptr)
+        {
+            Point aPt(static_cast<SdrCaptionObj*>(pObj)->GetTailPos());
+            bool bTail=meDragHdl==SdrHdlKind::Poly; // drag tail
+            bool bOwn=dynamic_cast<const SdrDragObjOwn*>( mpCurrentSdrDragMethod.get() ) !=  nullptr; // specific to object
+            if (!bTail)
+            { // for bTail, TakeActionRect already does the right thing
+                if (bOwn)
+                { // bOwn may be MoveTextFrame, ResizeTextFrame, but may not (any more) be DragTail
+                    rPos=aPt;
+                }
+                else
+                {
+                    // drag the whole Object (Move, Resize, ...)
+                    const basegfx::B2DPoint aTransformed(mpCurrentSdrDragMethod->getCurrentTransformation() * basegfx::B2DPoint(aPt.X(), aPt.Y()));
+                    rPos.setX( basegfx::fround(aTransformed.getX()) );
+                    rPos.setY( basegfx::fround(aTransformed.getY()) );
+                }
+            }
+        }
+        return true;
+    }
+    return false;
+}
+
+
+bool SdrDragView::TakeDragLimit(SdrDragMode /*eMode*/, tools::Rectangle& /*rRect*/) const
+{
+    return false;
+}
+
+bool SdrDragView::BegDragObj(const Point& rPnt, OutputDevice* pOut, SdrHdl* pHdl, short nMinMov, SdrDragMethod* _pForcedMeth)
+{
+    BrkAction();
+
+    // so we don't leak the object on early return
+    std::unique_ptr<SdrDragMethod> pForcedMeth(_pForcedMeth);
+
+    bool bRet=false;
+    {
+        SetDragWithCopy(false);
+        //TODO: aAni.Reset();
+        mpCurrentSdrDragMethod=nullptr;
+        SdrDragMode eTmpMode=meDragMode;
+        if (eTmpMode==SdrDragMode::Move && pHdl!=nullptr && pHdl->GetKind()!=SdrHdlKind::Move) {
+            eTmpMode=SdrDragMode::Resize;
+        }
+        mbDragLimit=TakeDragLimit(eTmpMode,maDragLimit);
+        mbFramDrag=ImpIsFrameHandles();
+        if (!mbFramDrag &&
+            (mpMarkedObj==nullptr || !mpMarkedObj->hasSpecialDrag()) &&
+            (pHdl==nullptr || pHdl->GetObj()==nullptr)) {
+            mbFramDrag=true;
+        }
+
+        Point aPnt(rPnt);
+        basegfx::B2DVector aGridOffset(0.0, 0.0);
+
+        // Coordinate maybe affected by GridOffset, so we may need to
+        // adapt to Model-coordinates here
+        if(getPossibleGridOffsetForPosition(
+            aGridOffset,
+            basegfx::B2DPoint(aPnt.X(), aPnt.Y()),
+            GetSdrPageView()))
+        {
+            aPnt.AdjustX(basegfx::fround(-aGridOffset.getX()));
+            aPnt.AdjustY(basegfx::fround(-aGridOffset.getY()));
+        }
+
+        if(pHdl == nullptr
+            || pHdl->GetKind() == SdrHdlKind::Move
+            || pHdl->GetKind() == SdrHdlKind::MirrorAxis
+            || pHdl->GetKind() == SdrHdlKind::Transparence
+            || pHdl->GetKind() == SdrHdlKind::Gradient)
+        {
+            maDragStat.Reset(aPnt);
+        }
+        else
+        {
+            maDragStat.Reset(pHdl->GetPos());
+        }
+
+        maDragStat.SetView(static_cast<SdrView*>(this));
+        maDragStat.SetPageView(mpMarkedPV);  // <<-- DragPV has to go here!!!
+        maDragStat.SetMinMove(ImpGetMinMovLogic(nMinMov,pOut));
+        maDragStat.SetHdl(pHdl);
+        maDragStat.NextPoint();
+        mpDragWin=pOut;
+        mpDragHdl=pHdl;
+        meDragHdl= pHdl==nullptr ? SdrHdlKind::Move : pHdl->GetKind();
+        mbDragHdl=meDragHdl==SdrHdlKind::Ref1 || meDragHdl==SdrHdlKind::Ref2 || meDragHdl==SdrHdlKind::MirrorAxis;
+
+        // Expand test for SdrHdlKind::Anchor_TR
+        bool bNotDraggable = (SdrHdlKind::Anchor == meDragHdl || SdrHdlKind::Anchor_TR == meDragHdl);
+
+        if(pHdl && (pHdl->GetKind() == SdrHdlKind::SmartTag) && pForcedMeth )
+        {
+            // just use the forced method for smart tags
+        }
+        else if(mbDragHdl)
+        {
+            mpCurrentSdrDragMethod.reset(new SdrDragMovHdl(*this));
+        }
+        else if(!bNotDraggable)
+        {
+            switch (meDragMode)
+            {
+                case SdrDragMode::Rotate: case SdrDragMode::Shear:
+                {
+                    switch (meDragHdl)
+                    {
+                        case SdrHdlKind::Left:  case SdrHdlKind::Right:
+                        case SdrHdlKind::Upper: case SdrHdlKind::Lower:
+                        {
+                            // are 3D objects selected?
+                            bool b3DObjSelected = false;
+                            for(size_t a=0; !b3DObjSelected && a<GetMarkedObjectCount(); ++a)
+                            {
+                                SdrObject* pObj = GetMarkedObjectByIndex(a);
+                                if(dynamic_cast< const E3dObject* >(pObj))
+                                    b3DObjSelected = true;
+                            }
+                            // If yes, allow shear even when !IsShearAllowed,
+                            // because 3D objects are limited rotations
+                            if (!b3DObjSelected && !IsShearAllowed())
+                                return false;
+                            mpCurrentSdrDragMethod.reset(new SdrDragShear(*this,meDragMode==SdrDragMode::Rotate));
+                        } break;
+                        case SdrHdlKind::UpperLeft: case SdrHdlKind::UpperRight:
+                        case SdrHdlKind::LowerLeft: case SdrHdlKind::LowerRight:
+                        {
+                            if (meDragMode==SdrDragMode::Shear)
+                            {
+                                if (!IsDistortAllowed(true) && !IsDistortAllowed()) return false;
+                                mpCurrentSdrDragMethod.reset(new SdrDragDistort(*this));
+                            }
+                            else
+                            {
+                                if (!IsRotateAllowed(true)) return false;
+                                mpCurrentSdrDragMethod.reset(new SdrDragRotate(*this));
+                            }
+                        } break;
+                        default:
+                        {
+                            if (IsMarkedHitMovesAlways() && meDragHdl==SdrHdlKind::Move)
+                            { // SdrHdlKind::Move is true, even if Obj is hit directly
+                                if (!IsMoveAllowed()) return false;
+                                mpCurrentSdrDragMethod.reset(new SdrDragMove(*this));
+                            }
+                            else
+                            {
+                                if (!IsRotateAllowed(true)) return false;
+                                mpCurrentSdrDragMethod.reset(new SdrDragRotate(*this));
+                            }
+                        }
+                    }
+                } break;
+                case SdrDragMode::Mirror:
+                {
+                    if (meDragHdl==SdrHdlKind::Move && IsMarkedHitMovesAlways())
+                    {
+                        if (!IsMoveAllowed()) return false;
+                        mpCurrentSdrDragMethod.reset(new SdrDragMove(*this));
+                    }
+                    else
+                    {
+                        if (!IsMirrorAllowed(true,true)) return false;
+                        mpCurrentSdrDragMethod.reset(new SdrDragMirror(*this));
+                    }
+                } break;
+
+                case SdrDragMode::Crop:
+                {
+                    if (meDragHdl==SdrHdlKind::Move && IsMarkedHitMovesAlways())
+                    {
+                        if (!IsMoveAllowed())
+                            return false;
+                        mpCurrentSdrDragMethod.reset(new SdrDragMove(*this));
+                    }
+                    else
+                    {
+                        if (!IsCropAllowed())
+                            return false;
+                        mpCurrentSdrDragMethod.reset(new SdrDragCrop(*this));
+                    }
+                }
+                break;
+
+                case SdrDragMode::Transparence:
+                {
+                    if(meDragHdl == SdrHdlKind::Move && IsMarkedHitMovesAlways())
+                    {
+                        if(!IsMoveAllowed())
+                            return false;
+                        mpCurrentSdrDragMethod.reset(new SdrDragMove(*this));
+                    }
+                    else
+                    {
+                        if(!IsTransparenceAllowed())
+                            return false;
+
+                        mpCurrentSdrDragMethod.reset(new SdrDragGradient(*this, false));
+                    }
+                    break;
+                }
+                case SdrDragMode::Gradient:
+                {
+                    if(meDragHdl == SdrHdlKind::Move && IsMarkedHitMovesAlways())
+                    {
+                        if(!IsMoveAllowed())
+                            return false;
+                        mpCurrentSdrDragMethod.reset(new SdrDragMove(*this));
+                    }
+                    else
+                    {
+                        if(!IsGradientAllowed())
+                            return false;
+
+                        mpCurrentSdrDragMethod.reset(new SdrDragGradient(*this));
+                    }
+                    break;
+                }
+
+                case SdrDragMode::Crook :
+                {
+                    if (meDragHdl==SdrHdlKind::Move && IsMarkedHitMovesAlways())
+                    {
+                        if (!IsMoveAllowed()) return false;
+                        mpCurrentSdrDragMethod.reset( new SdrDragMove(*this) );
+                    }
+                    else
+                    {
+                        if (!IsCrookAllowed(true) && !IsCrookAllowed()) return false;
+                        mpCurrentSdrDragMethod.reset( new SdrDragCrook(*this) );
+                    }
+                } break;
+
+                default:
+                {
+                    // SdrDragMode::Move
+                    if((meDragHdl == SdrHdlKind::Move) && !IsMoveAllowed())
+                    {
+                        return false;
+                    }
+                    else if(meDragHdl == SdrHdlKind::Glue)
+                    {
+                        mpCurrentSdrDragMethod.reset( new SdrDragMove(*this) );
+                    }
+                    else
+                    {
+                        if(mbFramDrag)
+                        {
+                            if(meDragHdl == SdrHdlKind::Move)
+                            {
+                                mpCurrentSdrDragMethod.reset( new SdrDragMove(*this) );
+                            }
+                            else
+                            {
+                                if(!IsResizeAllowed(true))
+                                {
+                                    return false;
+                                }
+
+                                bool bSingleTextObjMark = false;    // SJ: #i100490#
+                                if ( GetMarkedObjectCount() == 1 )
+                                {
+                                    mpMarkedObj=GetMarkedObjectByIndex(0);
+                                    if ( mpMarkedObj &&
+                                        dynamic_cast<const SdrTextObj*>( mpMarkedObj) !=  nullptr &&
+                                        static_cast<SdrTextObj*>(mpMarkedObj)->IsTextFrame() )
+                                        bSingleTextObjMark = true;
+                                }
+                                if ( bSingleTextObjMark )
+                                    mpCurrentSdrDragMethod.reset( new SdrDragObjOwn(*this) );
+                                else
+                                    mpCurrentSdrDragMethod.reset( new SdrDragResize(*this) );
+                            }
+                        }
+                        else
+                        {
+                            if(SdrHdlKind::Move == meDragHdl)
+                            {
+                                const bool bCustomShapeSelected(1 == GetMarkedObjectCount() && dynamic_cast<const SdrObjCustomShape*>(GetMarkedObjectByIndex(0)) != nullptr);
+
+                                if(bCustomShapeSelected)
+                                {
+                                    mpCurrentSdrDragMethod.reset( new SdrDragMove( *this ) );
+                                }
+                            }
+                            else if(SdrHdlKind::Poly == meDragHdl)
+                            {
+                                const bool bConnectorSelected(1 == GetMarkedObjectCount() && dynamic_cast<const SdrEdgeObj*>(GetMarkedObjectByIndex(0)) != nullptr);
+
+                                if(bConnectorSelected)
+                                {
+                                    // #i97784#
+                                    // fallback to old behaviour for connectors (see
+                                    // text in task description for more details)
+                                }
+                                else if(!IsMoveAllowed() || !IsResizeAllowed())
+                                {
+                                    // #i77187#
+                                    // do not allow move of polygon points if object is move or size protected
+                                    return false;
+                                }
+                            }
+
+                            if(!mpCurrentSdrDragMethod)
+                            {
+                                // fallback to DragSpecial if no interaction defined
+                                mpCurrentSdrDragMethod.reset( new SdrDragObjOwn(*this) );
+                            }
+                        }
+                    }
+                }
+            }
+        }
+        if (pForcedMeth)
+        {
+            mpCurrentSdrDragMethod = std::move(pForcedMeth);
+        }
+        maDragStat.SetDragMethod(mpCurrentSdrDragMethod.get());
+        if (mpCurrentSdrDragMethod)
+        {
+            bRet = mpCurrentSdrDragMethod->BeginSdrDrag();
+            if (!bRet)
+            {
+                if (pHdl==nullptr && dynamic_cast< const SdrDragObjOwn* >(mpCurrentSdrDragMethod.get()) !=  nullptr)
+                {
+                    // Obj may not Move SpecialDrag, so try with MoveFrameDrag
+                    mpCurrentSdrDragMethod.reset();
+
+                    if (!IsMoveAllowed())
+                        return false;
+
+                    mbFramDrag=true;
+                    mpCurrentSdrDragMethod.reset( new SdrDragMove(*this) );
+                    maDragStat.SetDragMethod(mpCurrentSdrDragMethod.get());
+                    bRet = mpCurrentSdrDragMethod->BeginSdrDrag();
+                }
+            }
+            if (!bRet)
+            {
+                mpCurrentSdrDragMethod.reset();
+                maDragStat.SetDragMethod(mpCurrentSdrDragMethod.get());
+            }
+        }
+    }
+
+    return bRet;
+}
+
+void SdrDragView::MovDragObj(const Point& rPnt)
+{
+    if (mpCurrentSdrDragMethod)
+    {
+        Point aPnt(rPnt);
+        basegfx::B2DVector aGridOffset(0.0, 0.0);
+
+        // Coordinate maybe affected by GridOffset, so we may need to
+        // adapt to Model-coordinates here
+        if(getPossibleGridOffsetForPosition(
+            aGridOffset,
+            basegfx::B2DPoint(aPnt.X(), aPnt.Y()),
+            GetSdrPageView()))
+        {
+            aPnt.AdjustX(basegfx::fround(-aGridOffset.getX()));
+            aPnt.AdjustY(basegfx::fround(-aGridOffset.getY()));
+        }
+
+        ImpLimitToWorkArea(aPnt);
+        mpCurrentSdrDragMethod->MoveSdrDrag(aPnt); // this call already makes a Hide()/Show combination
+    }
+}
+
+bool SdrDragView::EndDragObj(bool bCopy)
+{
+    bool bRet(false);
+
+    // #i73341# If inserting GluePoint, do not insist on last points being different
+    if(mpCurrentSdrDragMethod && maDragStat.IsMinMoved() && (IsInsertGluePoint() || maDragStat.GetNow() != maDragStat.GetPrev()))
+    {
+        sal_Int32 nSavedHdlCount=0;
+
+        if (bEliminatePolyPoints)
+        {
+            nSavedHdlCount=GetMarkablePointCount();
+        }
+
+        const bool bUndo = IsUndoEnabled();
+        if (IsInsertGluePoint() && bUndo)
+        {
+            BegUndo(maInsPointUndoStr);
+            AddUndo(std::unique_ptr<SdrUndoAction>(mpInsPointUndo));
+        }
+
+        bRet = mpCurrentSdrDragMethod->EndSdrDrag(bCopy);
+
+        if( IsInsertGluePoint() && bUndo)
+            EndUndo();
+
+        mpCurrentSdrDragMethod.reset();
+
+        if (bEliminatePolyPoints)
+        {
+            if (nSavedHdlCount!=GetMarkablePointCount())
+            {
+                UnmarkAllPoints();
+            }
+        }
+
+        if (mbInsPolyPoint)
+        {
+            SetMarkHandles(nullptr);
+            mbInsPolyPoint=false;
+            if( bUndo )
+            {
+                BegUndo(maInsPointUndoStr);
+                AddUndo(std::unique_ptr<SdrUndoAction>(mpInsPointUndo));
+                EndUndo();
+            }
+        }
+
+        meDragHdl=SdrHdlKind::Move;
+        mpDragHdl=nullptr;
+
+        if (!mbSomeObjChgdFlag)
+        {
+            // Obj did not broadcast (e. g. Writer FlyFrames)
+            if(!mbDragHdl)
+            {
+                AdjustMarkHdl();
+            }
+        }
+    }
+    else
+    {
+        BrkDragObj();
+    }
+
+    mbInsPolyPoint=false;
+    SetInsertGluePoint(false);
+
+    return bRet;
+}
+
+void SdrDragView::BrkDragObj()
+{
+    if (mpCurrentSdrDragMethod)
+    {
+        mpCurrentSdrDragMethod->CancelSdrDrag();
+
+        mpCurrentSdrDragMethod.reset();
+
+        if (mbInsPolyPoint)
+        {
+            mpInsPointUndo->Undo(); // delete inserted point again
+            delete mpInsPointUndo;
+            mpInsPointUndo=nullptr;
+            SetMarkHandles(nullptr);
+            mbInsPolyPoint=false;
+        }
+
+        if (IsInsertGluePoint())
+        {
+            mpInsPointUndo->Undo(); // delete inserted glue point again
+            delete mpInsPointUndo;
+            mpInsPointUndo=nullptr;
+            SetInsertGluePoint(false);
+        }
+
+        meDragHdl=SdrHdlKind::Move;
+        mpDragHdl=nullptr;
+    }
+}
+
+bool SdrDragView::IsInsObjPointPossible() const
+{
+    return mpMarkedObj!=nullptr && mpMarkedObj->IsPolyObj();
+}
+
+bool SdrDragView::ImpBegInsObjPoint(bool bIdxZwang, const Point& rPnt, bool bNewObj, OutputDevice* pOut)
+{
+    bool bRet(false);
+
+    if(auto pMarkedPath = dynamic_cast<SdrPathObj*>( mpMarkedObj))
+    {
+        BrkAction();
+        mpInsPointUndo = dynamic_cast< SdrUndoGeoObj* >( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*mpMarkedObj).release() );
+        DBG_ASSERT( mpInsPointUndo, "svx::SdrDragView::BegInsObjPoint(), could not create correct undo object!" );
+
+        OUString aStr(SvxResId(STR_DragInsertPoint));
+
+        maInsPointUndoStr = aStr.replaceFirst("%1", mpMarkedObj->TakeObjNameSingul() );
+
+        Point aPt(rPnt);
+
+        if(bNewObj)
+            aPt = GetSnapPos(aPt,mpMarkedPV);
+
+        bool bClosed0 = pMarkedPath->IsClosedObj();
+
+        const sal_uInt32 nInsPointNum { bIdxZwang
+            ? pMarkedPath->NbcInsPoint(aPt, bNewObj)
+            : pMarkedPath->NbcInsPointOld(aPt, bNewObj)
+        };
+
+        if(bClosed0 != pMarkedPath->IsClosedObj())
+        {
+            // Obj was closed implicitly
+            // object changed
+            pMarkedPath->SetChanged();
+            pMarkedPath->BroadcastObjectChange();
+        }
+
+        if (nInsPointNum != SAL_MAX_UINT32)
+        {
+            mbInsPolyPoint = true;
+            UnmarkAllPoints();
+            AdjustMarkHdl();
+
+            bRet = BegDragObj(rPnt, pOut, maHdlList.GetHdl(nInsPointNum), 0);
+
+            if (bRet)
+            {
+                maDragStat.SetMinMoved();
+                MovDragObj(rPnt);
+            }
+        }
+        else
+        {
+            delete mpInsPointUndo;
+            mpInsPointUndo = nullptr;
+        }
+    }
+
+    return bRet;
+}
+
+bool SdrDragView::EndInsObjPoint(SdrCreateCmd eCmd)
+{
+    if(IsInsObjPoint())
+    {
+        Point aPnt(maDragStat.GetNow());
+        bool bOk=EndDragObj();
+        if (bOk && eCmd!=SdrCreateCmd::ForceEnd)
+        {
+            // Ret=True means: Action is over.
+            bOk = ! ImpBegInsObjPoint(true, aPnt, eCmd == SdrCreateCmd::NextObject, mpDragWin);
+        }
+
+        return bOk;
+    } else return false;
+}
+
+bool SdrDragView::IsInsGluePointPossible() const
+{
+    bool bRet=false;
+    if (IsInsGluePointMode() && AreObjectsMarked())
+    {
+        if (GetMarkedObjectCount()==1)
+        {
+            // return sal_False, if only 1 object which is a connector.
+            const SdrObject* pObj=GetMarkedObjectByIndex(0);
+            if (dynamic_cast<const SdrEdgeObj *>(pObj) == nullptr)
+            {
+               bRet=true;
+            }
+        }
+        else
+        {
+            bRet=true;
+        }
+    }
+    return bRet;
+}
+
+bool SdrDragView::BegInsGluePoint(const Point& rPnt)
+{
+    bool bRet=false;
+    SdrObject* pObj;
+    SdrPageView* pPV;
+    if (PickMarkedObj(rPnt,pObj,pPV,SdrSearchOptions::PASS2BOUND))
+    {
+        BrkAction();
+        UnmarkAllGluePoints();
+        mpInsPointUndo= dynamic_cast< SdrUndoGeoObj* >( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj).release() );
+        DBG_ASSERT( mpInsPointUndo, "svx::SdrDragView::BegInsObjPoint(), could not create correct undo object!" );
+        OUString aStr(SvxResId(STR_DragInsertGluePoint));
+
+        maInsPointUndoStr = aStr.replaceFirst("%1", pObj->TakeObjNameSingul() );
+
+        SdrGluePointList* pGPL=pObj->ForceGluePointList();
+        if (pGPL!=nullptr)
+        {
+            sal_uInt16 nGlueIdx=pGPL->Insert(SdrGluePoint());
+            SdrGluePoint& rGP=(*pGPL)[nGlueIdx];
+            sal_uInt16 nGlueId=rGP.GetId();
+            rGP.SetAbsolutePos(rPnt,*pObj);
+
+            SdrHdl* pHdl=nullptr;
+            if (MarkGluePoint(pObj,nGlueId,false))
+            {
+                pHdl=GetGluePointHdl(pObj,nGlueId);
+            }
+            if (pHdl!=nullptr && pHdl->GetKind()==SdrHdlKind::Glue && pHdl->GetObj()==pObj && pHdl->GetObjHdlNum()==nGlueId)
+            {
+                SetInsertGluePoint(true);
+                bRet=BegDragObj(rPnt,nullptr,pHdl,0);
+                if (bRet)
+                {
+                    maDragStat.SetMinMoved();
+                    MovDragObj(rPnt);
+                }
+                else
+                {
+                    SetInsertGluePoint(false);
+                    delete mpInsPointUndo;
+                    mpInsPointUndo=nullptr;
+                }
+            }
+            else
+            {
+                OSL_FAIL("BegInsGluePoint(): GluePoint handle not found.");
+            }
+        }
+        else
+        {
+            // no glue points possible for this object (e. g. Edge)
+            SetInsertGluePoint(false);
+            delete mpInsPointUndo;
+            mpInsPointUndo=nullptr;
+        }
+    }
+
+    return bRet;
+}
+
+void SdrDragView::ShowDragObj()
+{
+    if(mpCurrentSdrDragMethod && !maDragStat.IsShown())
+    {
+        // Changed for the GridOffset stuff: No longer iterate over
+        // SdrPaintWindow(s), but now over SdrPageWindow(s), so doing the
+        // same as the SdrHdl visualizations (see ::CreateB2dIAObject) do.
+        // This is needed to get access to an ObjectContact which is needed
+        // to evtl. process that GridOffset in CreateOverlayGeometry
+        SdrPageView* pPageView(GetSdrPageView());
+
+        if(nullptr != pPageView)
+        {
+            for(sal_uInt32 a(0); a < pPageView->PageWindowCount(); a++)
+            {
+                const SdrPageWindow& rPageWindow(*pPageView->GetPageWindow(a));
+                const SdrPaintWindow& rPaintWindow(rPageWindow.GetPaintWindow());
+
+                if(rPaintWindow.OutputToWindow())
+                {
+                    const rtl::Reference<sdr::overlay::OverlayManager>& xOverlayManager(
+                        rPaintWindow.GetOverlayManager());
+
+                    if(xOverlayManager.is())
+                    {
+                        mpCurrentSdrDragMethod->CreateOverlayGeometry(
+                            *xOverlayManager,
+                            rPageWindow.GetObjectContact());
+
+                        // #i101679# Force changed overlay to be shown
+                        xOverlayManager->flush();
+                    }
+                }
+            }
+        }
+
+        maDragStat.SetShown(true);
+    }
+}
+
+void SdrDragView::HideDragObj()
+{
+    if(mpCurrentSdrDragMethod && maDragStat.IsShown())
+    {
+        mpCurrentSdrDragMethod->destroyOverlayGeometry();
+        maDragStat.SetShown(false);
+    }
+}
+
+
+void SdrDragView::SetNoDragXorPolys(bool bOn)
+{
+    if (IsNoDragXorPolys()!=bOn)
+    {
+        const bool bDragging(mpCurrentSdrDragMethod);
+        const bool bShown(bDragging && maDragStat.IsShown());
+
+        if(bShown)
+        {
+            HideDragObj();
+        }
+
+        mbNoDragXorPolys = bOn;
+
+        if(bDragging)
+        {
+            // force recreation of drag content
+            mpCurrentSdrDragMethod->resetSdrDragEntries();
+        }
+
+        if(bShown)
+        {
+            ShowDragObj();
+        }
+    }
+}
+
+void SdrDragView::SetDragStripes(bool bOn)
+{
+    if (mpCurrentSdrDragMethod && maDragStat.IsShown())
+    {
+        HideDragObj();
+        mbDragStripes=bOn;
+        ShowDragObj();
+    }
+    else
+    {
+        mbDragStripes=bOn;
+    }
+}
+
+bool SdrDragView::IsOrthoDesired() const
+{
+    if( dynamic_cast< const SdrDragObjOwn* >( mpCurrentSdrDragMethod.get() )
+       || dynamic_cast< const SdrDragResize* >(mpCurrentSdrDragMethod.get() ))
+    {
+        return m_bOrthoDesiredOnMarked;
+    }
+
+    return false;
+}
+
+void SdrDragView::SetMarkHandles(SfxViewShell* pOtherShell)
+{
+    if( mpDragHdl )
+        mpDragHdl = nullptr;
+
+    SdrExchangeView::SetMarkHandles(pOtherShell);
+}
+
+void SdrDragView::SetSolidDragging(bool bOn)
+{
+    if(mbSolidDragging != bOn)
+    {
+        mbSolidDragging = bOn;
+    }
+}
+
+bool SdrDragView::IsSolidDragging() const
+{
+    // allow each user to disable by having a local setting, but using AND for
+    // checking allowance
+    return mbSolidDragging && getOptionsDrawinglayer().IsSolidDragCreate();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdedtv.cxx b/svx/source/svdraw/svdedtv.cxx
new file mode 100644
index 000000000..2e63c58d3
--- /dev/null
+++ b/svx/source/svdraw/svdedtv.cxx
@@ -0,0 +1,1046 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdedtv.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdoole2.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/svdlayer.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpoev.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/e3dsceneupdater.hxx>
+#include <rtl/strbuf.hxx>
+#include <svx/svdview.hxx>
+#include <clonelist.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/scene3d.hxx>
+#include <svx/xfillit0.hxx>
+
+
+using namespace com::sun::star;
+
+void SdrEditView::ImpResetPossibilityFlags()
+{
+    m_bReadOnly               =false;
+
+    m_bGroupPossible          =false;
+    m_bUnGroupPossible        =false;
+    m_bGrpEnterPossible       =false;
+    m_bToTopPossible          =false;
+    m_bToBtmPossible          =false;
+    m_bReverseOrderPossible   =false;
+
+    m_bImportMtfPossible      =false;
+    m_bCombinePossible        =false;
+    m_bDismantlePossible      =false;
+    m_bCombineNoPolyPolyPossible =false;
+    m_bDismantleMakeLinesPossible=false;
+    m_bOrthoDesiredOnMarked   =false;
+
+    m_bOneOrMoreMovable       =false;
+    m_bMoreThanOneNoMovRot    =false;
+    m_bContortionPossible     =false;
+    m_bMoveAllowed            =false;
+    m_bResizeFreeAllowed      =false;
+    m_bResizePropAllowed      =false;
+    m_bRotateFreeAllowed      =false;
+    m_bRotate90Allowed        =false;
+    m_bMirrorFreeAllowed      =false;
+    m_bMirror45Allowed        =false;
+    m_bMirror90Allowed        =false;
+    m_bTransparenceAllowed    =false;
+    m_bCropAllowed            =false;
+    m_bGradientAllowed        =false;
+    m_bShearAllowed           =false;
+    m_bEdgeRadiusAllowed      =false;
+    m_bCanConvToPath          =false;
+    m_bCanConvToPoly          =false;
+    m_bCanConvToContour       =false;
+    m_bMoveProtect            =false;
+    m_bResizeProtect          =false;
+}
+
+void SdrEditView::ImpClearVars()
+{
+    ImpResetPossibilityFlags();
+    m_bPossibilitiesDirty=true;   // << Purify didn't like this
+}
+
+SdrEditView::SdrEditView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrMarkView(rSdrModel, pOut)
+{
+    ImpClearVars();
+}
+
+SdrEditView::~SdrEditView()
+{
+}
+
+void SdrEditView::InsertNewLayer(const OUString& rName, sal_uInt16 nPos)
+{
+    SdrLayerAdmin& rLA=mpModel->GetLayerAdmin();
+    sal_uInt16 nMax=rLA.GetLayerCount();
+    if (nPos>nMax) nPos=nMax;
+    rLA.NewLayer(rName,nPos);
+
+    if( GetModel()->IsUndoEnabled() )
+        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewLayer(nPos,rLA,*mpModel));
+
+    mpModel->SetChanged();
+}
+
+bool SdrEditView::ImpDelLayerCheck(SdrObjList const * pOL, SdrLayerID nDelID) const
+{
+    bool bDelAll(true);
+
+    for(size_t nObjNum = pOL->GetObjCount(); nObjNum > 0 && bDelAll;)
+    {
+        nObjNum--;
+        SdrObject* pObj = pOL->GetObj(nObjNum);
+        SdrObjList* pSubOL = pObj->GetSubList();
+
+        // explicitly test for group objects and 3d scenes
+        if(pSubOL && (dynamic_cast<const SdrObjGroup*>(pObj) != nullptr || dynamic_cast< const E3dScene* >(pObj) !=  nullptr))
+        {
+            if(!ImpDelLayerCheck(pSubOL, nDelID))
+            {
+                bDelAll = false;
+            }
+        }
+        else
+        {
+            if(pObj->GetLayer() != nDelID)
+            {
+                bDelAll = false;
+            }
+        }
+    }
+
+    return bDelAll;
+}
+
+void SdrEditView::ImpDelLayerDelObjs(SdrObjList* pOL, SdrLayerID nDelID)
+{
+    const size_t nObjCount(pOL->GetObjCount());
+    // make sure OrdNums are correct
+    pOL->GetObj(0)->GetOrdNum();
+
+    const bool bUndo = GetModel()->IsUndoEnabled();
+
+    for(size_t nObjNum = nObjCount; nObjNum > 0;)
+    {
+        nObjNum--;
+        SdrObject* pObj = pOL->GetObj(nObjNum);
+        SdrObjList* pSubOL = pObj->GetSubList();
+
+
+        // explicitly test for group objects and 3d scenes
+        if(pSubOL && (dynamic_cast<const SdrObjGroup*>( pObj) != nullptr || dynamic_cast<const E3dScene* >(pObj) !=  nullptr))
+        {
+            if(ImpDelLayerCheck(pSubOL, nDelID))
+            {
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
+                pOL->RemoveObject(nObjNum);
+
+                if( !bUndo )
+                    SdrObject::Free( pObj );
+            }
+            else
+            {
+                ImpDelLayerDelObjs(pSubOL, nDelID);
+            }
+        }
+        else
+        {
+            if(pObj->GetLayer() == nDelID)
+            {
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
+                pOL->RemoveObject(nObjNum);
+                if( !bUndo )
+                    SdrObject::Free( pObj );
+            }
+        }
+    }
+}
+
+void SdrEditView::DeleteLayer(const OUString& rName)
+{
+    SdrLayerAdmin& rLA = mpModel->GetLayerAdmin();
+    SdrLayer* pLayer = rLA.GetLayer(rName);
+
+    if(pLayer)
+    {
+        sal_uInt16 nLayerNum(rLA.GetLayerPos(pLayer));
+        SdrLayerID nDelID = pLayer->GetID();
+
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+            BegUndo(SvxResId(STR_UndoDelLayer));
+
+        bool bMaPg(true);
+
+        for(sal_uInt16 nPageKind(0); nPageKind < 2; nPageKind++)
+        {
+            // MasterPages and DrawPages
+            sal_uInt16 nPgCount(bMaPg ? mpModel->GetMasterPageCount() : mpModel->GetPageCount());
+
+            for(sal_uInt16 nPgNum(0); nPgNum < nPgCount; nPgNum++)
+            {
+                // over all pages
+                SdrPage* pPage = bMaPg ? mpModel->GetMasterPage(nPgNum) : mpModel->GetPage(nPgNum);
+                const size_t nObjCount(pPage->GetObjCount());
+
+                // make sure OrdNums are correct
+                if(nObjCount)
+                    pPage->GetObj(0)->GetOrdNum();
+
+                for(size_t nObjNum(nObjCount); nObjNum > 0;)
+                {
+                    nObjNum--;
+                    SdrObject* pObj = pPage->GetObj(nObjNum);
+                    SdrObjList* pSubOL = pObj->GetSubList();
+
+                    // explicitly test for group objects and 3d scenes
+                    if(pSubOL && (dynamic_cast<const SdrObjGroup*>(pObj) != nullptr || dynamic_cast<const E3dScene* >(pObj) !=  nullptr))
+                    {
+                        if(ImpDelLayerCheck(pSubOL, nDelID))
+                        {
+                            if( bUndo )
+                                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
+                            pPage->RemoveObject(nObjNum);
+                            if( !bUndo )
+                                SdrObject::Free(pObj);
+                        }
+                        else
+                        {
+                            ImpDelLayerDelObjs(pSubOL, nDelID);
+                        }
+                    }
+                    else
+                    {
+                        if(pObj->GetLayer() == nDelID)
+                        {
+                            if( bUndo )
+                                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
+                            pPage->RemoveObject(nObjNum);
+                            if( !bUndo )
+                                SdrObject::Free(pObj);
+                        }
+                    }
+                }
+            }
+            bMaPg = false;
+        }
+
+        if( bUndo )
+        {
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteLayer(nLayerNum, rLA, *mpModel));
+            rLA.RemoveLayer(nLayerNum).release();
+            EndUndo();
+        }
+        else
+        {
+            rLA.RemoveLayer(nLayerNum);
+        }
+
+        mpModel->SetChanged();
+    }
+}
+
+
+void SdrEditView::EndUndo()
+{
+    // #i13033#
+    // Comparison changed to 1L since EndUndo() is called later now
+    // and EndUndo WILL change count to count-1
+    if(1 == mpModel->GetUndoBracketLevel())
+    {
+        ImpBroadcastEdgesOfMarkedNodes();
+    }
+
+    // #i13033#
+    // moved to bottom to still have access to UNDOs inside of
+    // ImpBroadcastEdgesOfMarkedNodes()
+    mpModel->EndUndo();
+}
+
+void SdrEditView::ImpBroadcastEdgesOfMarkedNodes()
+{
+    std::vector<SdrObject*>::const_iterator iterPos;
+    const std::vector<SdrObject*>& rAllMarkedObjects = GetTransitiveHullOfMarkedObjects();
+
+    // #i13033#
+    // New mechanism to search for necessary disconnections for
+    // changed connectors inside the transitive hull of all at
+    // the beginning of UNDO selected objects
+    for(size_t a(0); a < rAllMarkedObjects.size(); a++)
+    {
+        SdrEdgeObj* pEdge = dynamic_cast<SdrEdgeObj*>( rAllMarkedObjects[a] );
+
+        if(pEdge)
+        {
+            SdrObject* pObj1 = pEdge->GetConnectedNode(false);
+            SdrObject* pObj2 = pEdge->GetConnectedNode(true);
+
+            if(pObj1 && !pEdge->CheckNodeConnection(false))
+            {
+                iterPos = std::find(rAllMarkedObjects.begin(),rAllMarkedObjects.end(),pObj1);
+
+                if (iterPos == rAllMarkedObjects.end())
+                {
+                    if( IsUndoEnabled() )
+                        AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pEdge));
+                    pEdge->DisconnectFromNode(false);
+                }
+            }
+
+            if(pObj2 && !pEdge->CheckNodeConnection(true))
+            {
+                iterPos = std::find(rAllMarkedObjects.begin(),rAllMarkedObjects.end(),pObj2);
+
+                if (iterPos == rAllMarkedObjects.end())
+                {
+                    if( IsUndoEnabled() )
+                        AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pEdge));
+                    pEdge->DisconnectFromNode(true);
+                }
+            }
+        }
+    }
+
+    const size_t nMarkedEdgeCnt = GetMarkedEdgesOfMarkedNodes().GetMarkCount();
+
+    for (size_t i=0; i<nMarkedEdgeCnt; ++i) {
+        SdrMark* pEM = GetMarkedEdgesOfMarkedNodes().GetMark(i);
+        SdrObject* pEdgeTmp=pEM->GetMarkedSdrObj();
+        SdrEdgeObj* pEdge=dynamic_cast<SdrEdgeObj*>( pEdgeTmp );
+        if (pEdge!=nullptr) {
+            pEdge->SetEdgeTrackDirty();
+        }
+    }
+}
+
+
+// Possibilities
+
+
+void SdrEditView::MarkListHasChanged()
+{
+    SdrMarkView::MarkListHasChanged();
+    m_bPossibilitiesDirty=true;
+}
+
+void SdrEditView::ModelHasChanged()
+{
+    SdrMarkView::ModelHasChanged();
+    m_bPossibilitiesDirty=true;
+}
+
+bool SdrEditView::IsResizeAllowed(bool bProp) const
+{
+    ForcePossibilities();
+    if (m_bResizeProtect) return false;
+    if (bProp) return m_bResizePropAllowed;
+    return m_bResizeFreeAllowed;
+}
+
+bool SdrEditView::IsRotateAllowed(bool b90Deg) const
+{
+    ForcePossibilities();
+    if (m_bMoveProtect) return false;
+    if (b90Deg) return m_bRotate90Allowed;
+    return m_bRotateFreeAllowed;
+}
+
+bool SdrEditView::IsMirrorAllowed(bool b45Deg, bool b90Deg) const
+{
+    ForcePossibilities();
+    if (m_bMoveProtect) return false;
+    if (b90Deg) return m_bMirror90Allowed;
+    if (b45Deg) return m_bMirror45Allowed;
+    return m_bMirrorFreeAllowed;
+}
+
+bool SdrEditView::IsTransparenceAllowed() const
+{
+    ForcePossibilities();
+    return m_bTransparenceAllowed;
+}
+
+bool SdrEditView::IsCropAllowed() const
+{
+    ForcePossibilities();
+    return m_bCropAllowed;
+}
+
+bool SdrEditView::IsGradientAllowed() const
+{
+    ForcePossibilities();
+    return m_bGradientAllowed;
+}
+
+bool SdrEditView::IsShearAllowed() const
+{
+    ForcePossibilities();
+    if (m_bResizeProtect) return false;
+    return m_bShearAllowed;
+}
+
+bool SdrEditView::IsEdgeRadiusAllowed() const
+{
+    ForcePossibilities();
+    return m_bEdgeRadiusAllowed;
+}
+
+bool SdrEditView::IsCrookAllowed(bool bNoContortion) const
+{
+    // CrookMode missing here (no rotations allowed when shearing ...)
+    ForcePossibilities();
+    if (bNoContortion) {
+        if (!m_bRotateFreeAllowed) return false;
+        return !m_bMoveProtect && m_bMoveAllowed;
+    } else {
+        return !m_bResizeProtect && m_bContortionPossible;
+    }
+}
+
+bool SdrEditView::IsDistortAllowed(bool bNoContortion) const
+{
+    ForcePossibilities();
+    if (bNoContortion) {
+        return false;
+    } else {
+        return !m_bResizeProtect && m_bContortionPossible;
+    }
+}
+
+bool SdrEditView::IsCombinePossible(bool bNoPolyPoly) const
+{
+    ForcePossibilities();
+    if (bNoPolyPoly) return m_bCombineNoPolyPolyPossible;
+    else return m_bCombinePossible;
+}
+
+bool SdrEditView::IsDismantlePossible(bool bMakeLines) const
+{
+    ForcePossibilities();
+    if (bMakeLines) return m_bDismantleMakeLinesPossible;
+    else return m_bDismantlePossible;
+}
+
+void SdrEditView::CheckPossibilities()
+{
+    if (mbSomeObjChgdFlag)
+    {
+        m_bPossibilitiesDirty = true;
+
+        // This call IS necessary to correct the MarkList, in which
+        // no longer to the model belonging objects still can reside.
+        // These ones need to be removed.
+        CheckMarked();
+    }
+
+    if (m_bPossibilitiesDirty)
+    {
+        ImpResetPossibilityFlags();
+        SortMarkedObjects();
+        const size_t nMarkCount = GetMarkedObjectCount();
+        if (nMarkCount != 0)
+        {
+            m_bReverseOrderPossible = (nMarkCount >= 2);
+
+            size_t nMovableCount=0;
+            m_bGroupPossible=nMarkCount>=2;
+            m_bCombinePossible=nMarkCount>=2;
+            if (nMarkCount==1)
+            {
+                // check bCombinePossible more thoroughly
+                // still missing ...
+                const SdrObject* pObj=GetMarkedObjectByIndex(0);
+                //const SdrPathObj* pPath=dynamic_cast<SdrPathObj*>( pObj );
+                bool bGroup=pObj->GetSubList()!=nullptr;
+                bool bHasText=pObj->GetOutlinerParaObject()!=nullptr;
+                if (bGroup || bHasText) {
+                    m_bCombinePossible=true;
+                }
+            }
+            m_bCombineNoPolyPolyPossible=m_bCombinePossible;
+            // accept transformations for now
+            m_bMoveAllowed      =true;
+            m_bResizeFreeAllowed=true;
+            m_bResizePropAllowed=true;
+            m_bRotateFreeAllowed=true;
+            m_bRotate90Allowed  =true;
+            m_bMirrorFreeAllowed=true;
+            m_bMirror45Allowed  =true;
+            m_bMirror90Allowed  =true;
+            m_bShearAllowed     =true;
+            m_bEdgeRadiusAllowed=false;
+            m_bContortionPossible=true;
+            m_bCanConvToContour = true;
+
+            // these ones are only allowed when single object is selected
+            m_bTransparenceAllowed = (nMarkCount == 1);
+            m_bGradientAllowed = (nMarkCount == 1);
+            m_bCropAllowed = (nMarkCount == 1);
+            if(m_bGradientAllowed)
+            {
+                // gradient depends on fill style
+                const SdrMark* pM = GetSdrMarkByIndex(0);
+                const SdrObject* pObj = pM->GetMarkedSdrObj();
+
+                // may be group object, so get merged ItemSet
+                const SfxItemSet& rSet = pObj->GetMergedItemSet();
+                SfxItemState eState = rSet.GetItemState(XATTR_FILLSTYLE, false);
+
+                if(SfxItemState::DONTCARE != eState)
+                {
+                    // If state is not DONTCARE, test the item
+                    drawing::FillStyle eFillStyle = rSet.Get(XATTR_FILLSTYLE).GetValue();
+
+                    if(eFillStyle != drawing::FillStyle_GRADIENT)
+                    {
+                        m_bGradientAllowed = false;
+                    }
+                }
+            }
+
+            bool bNoMovRotFound=false;
+            const SdrPageView* pPV0=nullptr;
+
+            for (size_t nm=0; nm<nMarkCount; ++nm) {
+                const SdrMark* pM=GetSdrMarkByIndex(nm);
+                const SdrObject* pObj=pM->GetMarkedSdrObj();
+                const SdrPageView* pPV=pM->GetPageView();
+                if (pPV!=pPV0) {
+                    if (pPV->IsReadOnly()) m_bReadOnly=true;
+                    pPV0=pPV;
+                }
+
+                SdrObjTransformInfoRec aInfo;
+                pObj->TakeObjInfo(aInfo);
+                bool bMovPrt=pObj->IsMoveProtect();
+                bool bSizPrt=pObj->IsResizeProtect();
+                if (!bMovPrt && aInfo.bMoveAllowed) nMovableCount++; // count MovableObjs
+                if (bMovPrt) m_bMoveProtect=true;
+                if (bSizPrt) m_bResizeProtect=true;
+
+                // not allowed when not allowed at one object
+                if(!aInfo.bTransparenceAllowed)
+                    m_bTransparenceAllowed = false;
+
+                // If one of these can't do something, none can
+                if (!aInfo.bMoveAllowed      ) m_bMoveAllowed      =false;
+                if (!aInfo.bResizeFreeAllowed) m_bResizeFreeAllowed=false;
+                if (!aInfo.bResizePropAllowed) m_bResizePropAllowed=false;
+                if (!aInfo.bRotateFreeAllowed) m_bRotateFreeAllowed=false;
+                if (!aInfo.bRotate90Allowed  ) m_bRotate90Allowed  =false;
+                if (!aInfo.bMirrorFreeAllowed) m_bMirrorFreeAllowed=false;
+                if (!aInfo.bMirror45Allowed  ) m_bMirror45Allowed  =false;
+                if (!aInfo.bMirror90Allowed  ) m_bMirror90Allowed  =false;
+                if (!aInfo.bShearAllowed     ) m_bShearAllowed     =false;
+                if (aInfo.bEdgeRadiusAllowed) m_bEdgeRadiusAllowed=true;
+                if (aInfo.bNoContortion      ) m_bContortionPossible=false;
+                // For Crook with Contortion: all objects have to be
+                // Movable and Rotatable, except for a maximum of 1 of them
+                if (!m_bMoreThanOneNoMovRot) {
+                    if (!aInfo.bMoveAllowed || !aInfo.bResizeFreeAllowed) {
+                        m_bMoreThanOneNoMovRot=bNoMovRotFound;
+                        bNoMovRotFound=true;
+                    }
+                }
+
+                // Must be resizable to allow cropping
+                if (!aInfo.bResizeFreeAllowed && !aInfo.bResizePropAllowed)
+                    m_bCropAllowed = false;
+
+                // if one member cannot be converted, no conversion is possible
+                if(!aInfo.bCanConvToContour)
+                    m_bCanConvToContour = false;
+
+                // Ungroup
+                if (!m_bUnGroupPossible) m_bUnGroupPossible=pObj->GetSubList()!=nullptr;
+                // ConvertToCurve: If at least one can be converted, that is fine.
+                if (aInfo.bCanConvToPath          ) m_bCanConvToPath          =true;
+                if (aInfo.bCanConvToPoly          ) m_bCanConvToPoly          =true;
+
+                // Combine/Dismantle
+                if(m_bCombinePossible)
+                {
+                    m_bCombinePossible = ImpCanConvertForCombine(pObj);
+                    m_bCombineNoPolyPolyPossible = m_bCombinePossible;
+                }
+
+                if (!m_bDismantlePossible) m_bDismantlePossible = ImpCanDismantle(pObj, false);
+                if (!m_bDismantleMakeLinesPossible) m_bDismantleMakeLinesPossible = ImpCanDismantle(pObj, true);
+                // check OrthoDesiredOnMarked
+                if (!m_bOrthoDesiredOnMarked && !aInfo.bNoOrthoDesired) m_bOrthoDesiredOnMarked=true;
+                // check ImportMtf
+
+                if (!m_bImportMtfPossible)
+                {
+                    const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(pObj);
+                    if (pSdrGrafObj != nullptr)
+                    {
+                        if ((pSdrGrafObj->HasGDIMetaFile() && !pSdrGrafObj->IsEPS()) ||
+                            pSdrGrafObj->isEmbeddedVectorGraphicData())
+                        {
+                            m_bImportMtfPossible = true;
+                        }
+                    }
+
+                    const SdrOle2Obj* pSdrOle2Obj = dynamic_cast< const SdrOle2Obj* >(pObj);
+                    if (pSdrOle2Obj)
+                    {
+                        m_bImportMtfPossible = pSdrOle2Obj->GetObjRef().is();
+                    }
+                }
+            }
+
+            m_bOneOrMoreMovable=nMovableCount!=0;
+            m_bGrpEnterPossible=m_bUnGroupPossible;
+        }
+        ImpCheckToTopBtmPossible();
+        static_cast<SdrPolyEditView*>(this)->ImpCheckPolyPossibilities();
+        m_bPossibilitiesDirty=false;
+
+        if (m_bReadOnly) {
+            bool bTemp=m_bGrpEnterPossible;
+            ImpResetPossibilityFlags();
+            m_bReadOnly=true;
+            m_bGrpEnterPossible=bTemp;
+        }
+        if (m_bMoveAllowed) {
+            // Don't allow moving glued connectors.
+            // Currently only implemented for single selection.
+            if (nMarkCount==1) {
+                SdrObject* pObj=GetMarkedObjectByIndex(0);
+                SdrEdgeObj* pEdge=dynamic_cast<SdrEdgeObj*>( pObj );
+                if (pEdge!=nullptr) {
+                    SdrObject* pNode1=pEdge->GetConnectedNode(true);
+                    SdrObject* pNode2=pEdge->GetConnectedNode(false);
+                    if (pNode1!=nullptr || pNode2!=nullptr) m_bMoveAllowed=false;
+                }
+            }
+        }
+    }
+}
+
+
+void SdrEditView::ForceMarkedObjToAnotherPage()
+{
+    bool bFlg=false;
+    for (size_t nm=0; nm<GetMarkedObjectCount(); ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        tools::Rectangle aObjRect(pObj->GetCurrentBoundRect());
+        tools::Rectangle aPgRect(pM->GetPageView()->GetPageRect());
+        if (!aObjRect.IsOver(aPgRect)) {
+            bool bFnd=false;
+            SdrPageView* pPV = GetSdrPageView();
+
+            if(pPV)
+            {
+                bFnd = aObjRect.IsOver(pPV->GetPageRect());
+            }
+
+            if(bFnd)
+            {
+                pM->GetPageView()->GetObjList()->RemoveObject(pObj->GetOrdNum());
+                pPV->GetObjList()->InsertObject(pObj, SAL_MAX_SIZE);
+                pM->SetPageView(pPV);
+                InvalidateAllWin(aObjRect);
+                bFlg=true;
+            }
+        }
+    }
+    if (bFlg) {
+        MarkListHasChanged();
+    }
+}
+
+std::vector<SdrObject*> SdrEditView::DeleteMarkedList(SdrMarkList const& rMark)
+{
+    std::vector<SdrObject*> ret;
+    if (rMark.GetMarkCount()!=0)
+    {
+        rMark.ForceSort();
+
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+            BegUndo();
+        const size_t nMarkCount(rMark.GetMarkCount());
+
+        if(nMarkCount)
+        {
+            std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
+
+            if( bUndo )
+            {
+                for(size_t nm = nMarkCount; nm > 0;)
+                {
+                    --nm;
+                    SdrMark* pM = rMark.GetMark(nm);
+                    SdrObject* pObj = pM->GetMarkedSdrObj();
+
+                    // extra undo actions for changed connector which now may hold its laid out path (SJ)
+                    AddUndoActions(CreateConnectorUndo( *pObj ));
+
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj));
+                }
+            }
+
+            // make sure, OrderNums are correct:
+            rMark.GetMark(0)->GetMarkedSdrObj()->GetOrdNum();
+
+            for(size_t nm = nMarkCount; nm > 0;)
+            {
+                --nm;
+                SdrMark* pM = rMark.GetMark(nm);
+                SdrObject* pObj = pM->GetMarkedSdrObj();
+                SdrObjList*  pOL = pObj->getParentSdrObjListFromSdrObject();
+                const size_t nOrdNum(pObj->GetOrdNumDirect());
+
+                bool bIs3D = dynamic_cast< E3dObject* >(pObj);
+                // set up a scene updater if object is a 3d object
+                if(bIs3D)
+                {
+                    aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pObj));
+                }
+
+                pOL->RemoveObject(nOrdNum);
+
+                if( !bUndo )
+                {
+                    // tdf#108863 don't delete objects before EndUndo()
+                    ret.push_back(pObj);
+                }
+            }
+
+            // fire scene updaters
+            while(!aUpdaters.empty())
+            {
+                delete aUpdaters.back();
+                aUpdaters.pop_back();
+            }
+        }
+
+        if( bUndo )
+            EndUndo();
+    }
+    return ret;
+}
+
+static void lcl_LazyDelete(std::vector<SdrObject*> & rLazyDelete)
+{
+    // now delete removed scene objects
+    while (!rLazyDelete.empty())
+    {
+        SdrObject::Free( rLazyDelete.back() );
+        rLazyDelete.pop_back();
+    }
+}
+
+void SdrEditView::DeleteMarkedObj()
+{
+    // #i110981# return when nothing is to be done at all
+    if(!GetMarkedObjectCount())
+    {
+        return;
+    }
+
+    // moved breaking action and undo start outside loop
+    BrkAction();
+    BegUndo(SvxResId(STR_EditDelete),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::Delete);
+
+    std::vector<SdrObject*> lazyDeleteObjects;
+    // remove as long as something is selected. This allows to schedule objects for
+    // removal for a next run as needed
+    while(GetMarkedObjectCount())
+    {
+        // vector to remember the parents which may be empty after object removal
+        std::vector< SdrObject* > aParents;
+
+        {
+            const SdrMarkList& rMarkList = GetMarkedObjectList();
+            const size_t nCount(rMarkList.GetMarkCount());
+
+            for(size_t a = 0; a < nCount; ++a)
+            {
+                // in the first run, add all found parents, but only once
+                SdrMark* pMark(rMarkList.GetMark(a));
+                SdrObject* pObject(pMark->GetMarkedSdrObj());
+                SdrObject* pParent(pObject->getParentSdrObjectFromSdrObject());
+
+                if(pParent)
+                {
+                    if(!aParents.empty())
+                    {
+                        std::vector< SdrObject* >::iterator aFindResult =
+                            std::find(aParents.begin(), aParents.end(), pParent);
+
+                        if(aFindResult == aParents.end())
+                        {
+                            aParents.push_back(pParent);
+                        }
+                    }
+                    else
+                    {
+                        aParents.push_back(pParent);
+                    }
+                }
+            }
+
+            if(!aParents.empty())
+            {
+                // in a 2nd run, remove all objects which may already be scheduled for
+                // removal. I am not sure if this can happen, but theoretically
+                // a to-be-removed object may already be the group/3DScene itself
+                for(size_t a = 0; a < nCount; ++a)
+                {
+                    SdrMark* pMark = rMarkList.GetMark(a);
+                    SdrObject* pObject = pMark->GetMarkedSdrObj();
+
+                    std::vector< SdrObject* >::iterator aFindResult =
+                        std::find(aParents.begin(), aParents.end(), pObject);
+
+                    if(aFindResult != aParents.end())
+                    {
+                        aParents.erase(aFindResult);
+                    }
+                }
+            }
+        }
+
+        // original stuff: remove selected objects. Handle clear will
+        // do something only once
+        auto temp(DeleteMarkedList(GetMarkedObjectList()));
+        for (auto p : temp)
+        {
+            lazyDeleteObjects.push_back(p);
+        }
+        GetMarkedObjectListWriteAccess().Clear();
+        maHdlList.Clear();
+
+        while(!aParents.empty() && !GetMarkedObjectCount())
+        {
+            // iterate over remembered parents
+            SdrObject* pParent = aParents.back();
+            aParents.pop_back();
+
+            if(pParent->GetSubList() && 0 == pParent->GetSubList()->GetObjCount())
+            {
+                // we detected an empty parent, a candidate to leave group/3DScene
+                // if entered
+                if(GetSdrPageView()->GetCurrentGroup()
+                    && GetSdrPageView()->GetCurrentGroup() == pParent)
+                {
+                    GetSdrPageView()->LeaveOneGroup();
+                }
+
+                // schedule empty parent for removal
+                GetMarkedObjectListWriteAccess().InsertEntry(
+                    SdrMark(pParent, GetSdrPageView()));
+            }
+        }
+    }
+
+    // end undo and change messaging moved at the end
+    EndUndo();
+    MarkListHasChanged();
+
+    lcl_LazyDelete(lazyDeleteObjects);
+}
+
+void SdrEditView::CopyMarkedObj()
+{
+    SortMarkedObjects();
+
+    SdrMarkList aSourceObjectsForCopy(GetMarkedObjectList());
+    // The following loop is used instead of MarkList::Merge(), to be
+    // able to flag the MarkEntries.
+    const size_t nEdgeCnt = GetEdgesOfMarkedNodes().GetMarkCount();
+    for (size_t nEdgeNum=0; nEdgeNum<nEdgeCnt; ++nEdgeNum) {
+        SdrMark aM(*GetEdgesOfMarkedNodes().GetMark(nEdgeNum));
+        aM.SetUser(1);
+        aSourceObjectsForCopy.InsertEntry(aM);
+    }
+    aSourceObjectsForCopy.ForceSort();
+
+    // #i13033#
+    // New mechanism to re-create the connections of cloned connectors
+    CloneList aCloneList;
+
+    const bool bUndo = IsUndoEnabled();
+
+    GetMarkedObjectListWriteAccess().Clear();
+    size_t nCloneErrCnt=0;
+    std::unordered_set<rtl::OUString> aNameSet;
+    const size_t nMarkCount=aSourceObjectsForCopy.GetMarkCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm) {
+        SdrMark* pM=aSourceObjectsForCopy.GetMark(nm);
+        SdrObject* pSource(pM->GetMarkedSdrObj());
+        SdrObject* pO(pSource->CloneSdrObject(pSource->getSdrModelFromSdrObject()));
+        if (pO!=nullptr) {
+            pM->GetPageView()->GetObjList()->InsertObjectThenMakeNameUnique(pO, aNameSet);
+
+            if( bUndo )
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoCopyObject(*pO));
+
+            SdrMark aME(*pM);
+            aME.SetMarkedSdrObj(pO);
+            aCloneList.AddPair(pM->GetMarkedSdrObj(), pO);
+
+            if (pM->GetUser()==0)
+            {
+                // otherwise it is only an Edge we have to copy as well
+                GetMarkedObjectListWriteAccess().InsertEntry(aME);
+            }
+        } else {
+            nCloneErrCnt++;
+        }
+    }
+
+    // #i13033#
+    // New mechanism to re-create the connections of cloned connectors
+    aCloneList.CopyConnections();
+
+    if(nCloneErrCnt)
+    {
+#ifdef DBG_UTIL
+        OStringBuffer aStr("SdrEditView::CopyMarkedObj(): Error when cloning ");
+
+        if(nCloneErrCnt == 1)
+        {
+            aStr.append("a drawing object.");
+        }
+        else
+        {
+            aStr.append(static_cast<sal_Int32>(nCloneErrCnt));
+            aStr.append(" drawing objects.");
+        }
+
+        aStr.append(" This object's/These objects's connections will not be copied.");
+        OSL_FAIL(aStr.getStr());
+#endif
+    }
+    MarkListHasChanged();
+}
+
+
+bool SdrEditView::InsertObjectAtView(SdrObject* pObj, SdrPageView& rPV, SdrInsertFlags nOptions)
+{
+    if (nOptions & SdrInsertFlags::SETDEFLAYER) {
+        SdrLayerID nLayer=rPV.GetPage()->GetLayerAdmin().GetLayerID(maActualLayer);
+        if (nLayer==SDRLAYER_NOTFOUND) nLayer=SdrLayerID(0);
+        if (rPV.GetLockedLayers().IsSet(nLayer) || !rPV.GetVisibleLayers().IsSet(nLayer)) {
+            SdrObject::Free( pObj ); // Layer locked or invisible
+            return false;
+        }
+        pObj->NbcSetLayer(nLayer);
+    }
+    if (nOptions & SdrInsertFlags::SETDEFATTR) {
+        if (mpDefaultStyleSheet!=nullptr) pObj->NbcSetStyleSheet(mpDefaultStyleSheet, false);
+        pObj->SetMergedItemSet(maDefaultAttr);
+    }
+    if (!pObj->IsInserted()) {
+        rPV.GetObjList()->InsertObject(pObj, SAL_MAX_SIZE);
+    }
+    if( IsUndoEnabled())
+    {
+        EndTextEditAllViews();
+        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pObj));
+    }
+
+    if (!(nOptions & SdrInsertFlags::DONTMARK)) {
+        if (!(nOptions & SdrInsertFlags::ADDMARK)) UnmarkAllObj();
+        MarkObj(pObj,&rPV);
+    }
+    return true;
+}
+
+void SdrEditView::ReplaceObjectAtView(SdrObject* pOldObj, SdrPageView& rPV, SdrObject* pNewObj, bool bMark)
+{
+    if(IsTextEdit())
+    {
+#ifdef DBG_UTIL
+        if(dynamic_cast< SdrTextObj* >(pOldObj) && static_cast< SdrTextObj* >(pOldObj)->IsTextEditActive())
+        {
+            OSL_ENSURE(false, "OldObject is in TextEdit mode, this has to be ended before replacing it using SdrEndTextEdit (!)");
+        }
+
+        if(dynamic_cast< SdrTextObj* >(pNewObj) && static_cast< SdrTextObj* >(pNewObj)->IsTextEditActive())
+        {
+            OSL_ENSURE(false, "NewObject is in TextEdit mode, this has to be ended before replacing it using SdrEndTextEdit (!)");
+        }
+#endif
+
+        // #i123468# emergency repair situation, needs to cast up to a class derived from
+        // this one; (aw080 has a mechanism for that and the view hierarchy is secured to
+        // always be a SdrView)
+        SdrView *pSdrView = dynamic_cast<SdrView*>(this);
+        if (pSdrView)
+            pSdrView->SdrEndTextEdit();
+    }
+
+    SdrObjList* pOL=pOldObj->getParentSdrObjListFromSdrObject();
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo  )
+        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoReplaceObject(*pOldObj,*pNewObj));
+
+    if( IsObjMarked( pOldObj ) )
+        MarkObj( pOldObj, &rPV, true /*unmark!*/ );
+
+    pOL->ReplaceObject(pNewObj,pOldObj->GetOrdNum());
+
+    if( !bUndo )
+        SdrObject::Free( pOldObj );
+
+    if (bMark) MarkObj(pNewObj,&rPV);
+}
+
+
+bool SdrEditView::IsUndoEnabled() const
+{
+    return mpModel->IsUndoEnabled();
+}
+
+void SdrEditView::EndTextEditAllViews() const
+{
+    size_t nViews = mpModel->GetListenerCount();
+    for (size_t nView = 0; nView < nViews; ++nView)
+    {
+        SdrObjEditView* pView = dynamic_cast<SdrObjEditView*>(mpModel->GetListener(nView));
+        if (!pView)
+            continue;
+
+        if (pView->IsTextEdit())
+            pView->SdrEndTextEdit();
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdedtv1.cxx b/svx/source/svdraw/svdedtv1.cxx
new file mode 100644
index 000000000..389801f8d
--- /dev/null
+++ b/svx/source/svdraw/svdedtv1.cxx
@@ -0,0 +1,1990 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <editeng/eeitem.hxx>
+#include <math.h>
+#include <svl/itemiter.hxx>
+#include <svl/whiter.hxx>
+#include <tools/bigint.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+
+#include <getallcharpropids.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/svditer.hxx>
+#include <svx/strings.hrc>
+
+#include <AffineMatrixItem.hxx>
+#include <svx/e3dsceneupdater.hxx>
+#include <svx/obj3d.hxx>
+#include <svx/rectenum.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <svx/sdooitm.hxx>
+#include <svx/sderitm.hxx>
+#include <svx/sdtagitm.hxx>
+#include <svx/svdedtv.hxx>
+#include <svx/svdetc.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svxids.hrc>
+#include <sxallitm.hxx>
+#include <sxmovitm.hxx>
+#include <sxreaitm.hxx>
+#include <sxreoitm.hxx>
+#include <sxroaitm.hxx>
+#include <sxrooitm.hxx>
+#include <sxsalitm.hxx>
+#include <sxsoitm.hxx>
+#include <sxtraitm.hxx>
+#include <svx/xlnedwit.hxx>
+#include <svx/xlnstwit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xlntrit.hxx>
+#include <svx/xfltrit.hxx>
+#include <svx/sdprcitm.hxx>
+#include <LibreOfficeKit/LibreOfficeKitEnums.h>
+#include <rtl/ustring.hxx>
+#include <sfx2/viewsh.hxx>
+#include <comphelper/lok.hxx>
+
+// EditView
+
+
+void SdrEditView::SetMarkedObjRect(const tools::Rectangle& rRect)
+{
+    DBG_ASSERT(!rRect.IsEmpty(),"SetMarkedObjRect() with an empty Rect does not make sense.");
+    if (rRect.IsEmpty()) return;
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount==0) return;
+    tools::Rectangle aR0(GetMarkedObjRect());
+    DBG_ASSERT(!aR0.IsEmpty(),"SetMarkedObjRect(): GetMarkedObjRect() is empty.");
+    if (aR0.IsEmpty()) return;
+    long x0=aR0.Left();
+    long y0=aR0.Top();
+    long w0=aR0.Right()-x0;
+    long h0=aR0.Bottom()-y0;
+    long x1=rRect.Left();
+    long y1=rRect.Top();
+    long w1=rRect.Right()-x1;
+    long h1=rRect.Bottom()-y1;
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        BegUndo(ImpGetDescriptionString(STR_EditPosSize));
+    }
+
+    for (size_t nm=0; nm<nCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+
+        tools::Rectangle aR1(pO->GetSnapRect());
+        if (!aR1.IsEmpty())
+        {
+            if (aR1==aR0)
+            {
+                aR1=rRect;
+            }
+            else
+            { // transform aR1 to aR0 after rRect
+                aR1.Move(-x0,-y0);
+                BigInt l(aR1.Left());
+                BigInt r(aR1.Right());
+                BigInt t(aR1.Top());
+                BigInt b(aR1.Bottom());
+                if (w0!=0) {
+                    l*=w1; l/=w0;
+                    r*=w1; r/=w0;
+                } else {
+                    l=0; r=w1;
+                }
+                if (h0!=0) {
+                    t*=h1; t/=h0;
+                    b*=h1; b/=h0;
+                } else {
+                    t=0; b=h1;
+                }
+                aR1.SetLeft(long(l) );
+                aR1.SetRight(long(r) );
+                aR1.SetTop(long(t) );
+                aR1.SetBottom(long(b) );
+                aR1.Move(x1,y1);
+            }
+            pO->SetSnapRect(aR1);
+        } else {
+            OSL_FAIL("SetMarkedObjRect(): pObj->GetSnapRect() returns empty Rect");
+        }
+    }
+    if( bUndo )
+        EndUndo();
+}
+
+std::vector< std::unique_ptr<SdrUndoAction> > SdrEditView::CreateConnectorUndo( SdrObject& rO )
+{
+    std::vector< std::unique_ptr<SdrUndoAction> > vUndoActions;
+
+    if ( rO.GetBroadcaster() )
+    {
+        const SdrPage* pPage = rO.getSdrPageFromSdrObject();
+        if ( pPage )
+        {
+            SdrObjListIter aIter(pPage, SdrIterMode::DeepWithGroups);
+            while( aIter.IsMore() )
+            {
+                SdrObject* pPartObj = aIter.Next();
+                if ( dynamic_cast<const SdrEdgeObj*>( pPartObj) !=  nullptr )
+                {
+                    if ( ( pPartObj->GetConnectedNode( false ) == &rO ) ||
+                         ( pPartObj->GetConnectedNode( true  ) == &rO ) )
+                    {
+                        vUndoActions.push_back( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject( *pPartObj ) );
+                    }
+                }
+            }
+        }
+    }
+    return vUndoActions;
+}
+
+void SdrEditView::AddUndoActions( std::vector< std::unique_ptr<SdrUndoAction> > aUndoActions )
+{
+    for (auto & rAction : aUndoActions)
+        AddUndo( std::move(rAction) );
+}
+
+void SdrEditView::MoveMarkedObj(const Size& rSiz, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr(SvxResId(STR_EditMove));
+        if (bCopy)
+            aStr += SvxResId(STR_EditWithCopy);
+        // needs its own UndoGroup because of its parameters
+        BegUndo(aStr,GetDescriptionOfMarkedObjects(),SdrRepeatFunc::Move);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoMoveObject(*pO,rSiz));
+        }
+        pO->Move(rSiz);
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::ResizeMarkedObj(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr {ImpGetDescriptionString(STR_EditResize)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+        }
+        pO->Resize(rRef,xFact,yFact);
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+void SdrEditView::ResizeMultMarkedObj(const Point& rRef,
+    const Fraction& xFact,
+    const Fraction& yFact,
+    const bool bWdh,
+    const bool bHgt)
+{
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        BegUndo(ImpGetDescriptionString(STR_EditResize));
+    }
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+        }
+
+        Fraction aFrac(1,1);
+        if (bWdh && xFact.IsValid() && bHgt && yFact.IsValid())
+            pO->Resize(rRef, xFact, yFact);
+        else if (bWdh && xFact.IsValid())
+            pO->Resize(rRef, xFact, aFrac);
+        else if (bHgt && yFact.IsValid())
+            pO->Resize(rRef, aFrac, yFact);
+    }
+    if( bUndo )
+        EndUndo();
+}
+
+long SdrEditView::GetMarkedObjRotate() const
+{
+    long nRetval(0);
+
+    if(GetMarkedObjectCount())
+    {
+        SdrMark* pM = GetSdrMarkByIndex(0);
+        SdrObject* pO = pM->GetMarkedSdrObj();
+
+        nRetval = pO->GetRotateAngle();
+    }
+
+    return nRetval;
+    //sal_Bool b1st=true;
+    //sal_Bool bOk=true;
+    //long nAngle=0;
+    //sal_uIntPtr nMarkCount=GetMarkedObjectCount();
+    //for (sal_uIntPtr nm=0; nm<nMarkCount && bOk; nm++) {
+    //  SdrMark* pM=GetSdrMarkByIndex(nm);
+    //  SdrObject* pO=pM->GetMarkedSdrObj();
+    //  long nAngle2=pO->GetRotateAngle();
+    //  if (b1st) nAngle=nAngle2;
+    //  else if (nAngle2!=nAngle) bOk=false;
+    //  b1st=false;
+    //}
+    //if (!bOk) nAngle=0;
+    //return nAngle;
+}
+
+void SdrEditView::RotateMarkedObj(const Point& rRef, long nAngle, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr {ImpGetDescriptionString(STR_EditRotate)};
+        if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    double nSin = sin(nAngle * F_PI18000);
+    double nCos = cos(nAngle * F_PI18000);
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    if(nMarkCount)
+    {
+        std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
+
+        for(size_t nm = 0; nm < nMarkCount; ++nm)
+        {
+            SdrMark* pM = GetSdrMarkByIndex(nm);
+            SdrObject* pO = pM->GetMarkedSdrObj();
+
+            if( bUndo )
+            {
+                // extra undo actions for changed connector which now may hold its laid out path (SJ)
+                AddUndoActions( CreateConnectorUndo( *pO ) );
+
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+            }
+
+            // set up a scene updater if object is a 3d object
+            if(dynamic_cast< E3dObject* >(pO))
+            {
+                aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pO));
+            }
+
+            pO->Rotate(rRef,nAngle,nSin,nCos);
+        }
+
+        // fire scene updaters
+        while(!aUpdaters.empty())
+        {
+            delete aUpdaters.back();
+            aUpdaters.pop_back();
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::MirrorMarkedObj(const Point& rRef1, const Point& rRef2, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr;
+        Point aDif(rRef2-rRef1);
+        if (aDif.X()==0)
+            aStr = ImpGetDescriptionString(STR_EditMirrorHori);
+        else if (aDif.Y()==0)
+            aStr = ImpGetDescriptionString(STR_EditMirrorVert);
+        else if (std::abs(aDif.X()) == std::abs(aDif.Y()))
+            aStr = ImpGetDescriptionString(STR_EditMirrorDiag);
+        else
+            aStr = ImpGetDescriptionString(STR_EditMirrorFree);
+        if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    if(nMarkCount)
+    {
+        std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
+
+        for(size_t nm = 0; nm < nMarkCount; ++nm)
+        {
+            SdrMark* pM = GetSdrMarkByIndex(nm);
+            SdrObject* pO = pM->GetMarkedSdrObj();
+
+            if( bUndo )
+            {
+                // extra undo actions for changed connector which now may hold its laid out path (SJ)
+                AddUndoActions( CreateConnectorUndo( *pO ) );
+
+                AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+            }
+
+            // set up a scene updater if object is a 3d object
+            if(dynamic_cast< E3dObject* >(pO))
+            {
+                aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pO));
+            }
+
+            pO->Mirror(rRef1,rRef2);
+        }
+
+        // fire scene updaters
+        while(!aUpdaters.empty())
+        {
+            delete aUpdaters.back();
+            aUpdaters.pop_back();
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::MirrorMarkedObjHorizontal()
+{
+    Point aCenter(GetMarkedObjRect().Center());
+    Point aPt2(aCenter);
+    aPt2.AdjustY( 1 );
+    MirrorMarkedObj(aCenter,aPt2);
+}
+
+void SdrEditView::MirrorMarkedObjVertical()
+{
+    Point aCenter(GetMarkedObjRect().Center());
+    Point aPt2(aCenter);
+    aPt2.AdjustX( 1 );
+    MirrorMarkedObj(aCenter,aPt2);
+}
+
+long SdrEditView::GetMarkedObjShear() const
+{
+    bool b1st=true;
+    bool bOk=true;
+    long nAngle=0;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount && bOk; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        long nAngle2=pO->GetShearAngle();
+        if (b1st) nAngle=nAngle2;
+        else if (nAngle2!=nAngle) bOk=false;
+        b1st=false;
+    }
+    if (nAngle>SDRMAXSHEAR) nAngle=SDRMAXSHEAR;
+    if (nAngle<-SDRMAXSHEAR) nAngle=-SDRMAXSHEAR;
+    if (!bOk) nAngle=0;
+    return nAngle;
+}
+
+void SdrEditView::ShearMarkedObj(const Point& rRef, long nAngle, bool bVShear, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr {ImpGetDescriptionString(STR_EditShear)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    double nTan = tan(nAngle * F_PI18000);
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+        }
+        pO->Shear(rRef,nAngle,nTan,bVShear);
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::ImpCrookObj(SdrObject* pO, const Point& rRef, const Point& rRad,
+    SdrCrookMode eMode, bool bVertical, bool bNoContortion, bool bRotate, const tools::Rectangle& rMarkRect)
+{
+    SdrPathObj* pPath=dynamic_cast<SdrPathObj*>( pO );
+    bool bDone = false;
+
+    if(pPath!=nullptr && !bNoContortion)
+    {
+        XPolyPolygon aXPP(pPath->GetPathPoly());
+        switch (eMode) {
+            case SdrCrookMode::Rotate : CrookRotatePoly (aXPP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Slant  : CrookSlantPoly  (aXPP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Stretch: CrookStretchPoly(aXPP,rRef,rRad,bVertical,rMarkRect); break;
+        } // switch
+        pPath->SetPathPoly(aXPP.getB2DPolyPolygon());
+        bDone = true;
+    }
+
+    if(!bDone && !pPath && pO->IsPolyObj() && 0 != pO->GetPointCount())
+    {
+        // for PolyObj's, but NOT for SdrPathObj's, e.g. the measurement object
+        sal_uInt32 nPointCount(pO->GetPointCount());
+        XPolygon aXP(static_cast<sal_uInt16>(nPointCount));
+        sal_uInt32 nPtNum;
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            Point aPt(pO->GetPoint(nPtNum));
+            aXP[static_cast<sal_uInt16>(nPtNum)]=aPt;
+        }
+
+        switch (eMode)
+        {
+            case SdrCrookMode::Rotate : CrookRotatePoly (aXP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Slant  : CrookSlantPoly  (aXP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Stretch: CrookStretchPoly(aXP,rRef,rRad,bVertical,rMarkRect); break;
+        }
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            // broadcasting could be optimized here, but for the
+            // current two points of the measurement object, it's fine
+            pO->SetPoint(aXP[static_cast<sal_uInt16>(nPtNum)],nPtNum);
+        }
+
+        bDone = true;
+    }
+
+    if(!bDone)
+    {
+        // for all others or if bNoContortion
+        Point aCtr0(pO->GetSnapRect().Center());
+        Point aCtr1(aCtr0);
+        bool bRotOk(false);
+        double nSin(0.0), nCos(1.0);
+        double nAngle(0.0);
+
+        if(0 != rRad.X() && 0 != rRad.Y())
+        {
+            bRotOk = bRotate;
+
+            switch (eMode)
+            {
+                case SdrCrookMode::Rotate : nAngle=CrookRotateXPoint (aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical); bRotOk=bRotate; break;
+                case SdrCrookMode::Slant  : nAngle=CrookSlantXPoint  (aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical);           break;
+                case SdrCrookMode::Stretch: nAngle=CrookStretchXPoint(aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical,rMarkRect); break;
+            }
+        }
+
+        aCtr1 -= aCtr0;
+
+        if(bRotOk)
+            pO->Rotate(aCtr0, FRound(nAngle / F_PI18000), nSin, nCos);
+
+        pO->Move(Size(aCtr1.X(),aCtr1.Y()));
+    }
+}
+
+void SdrEditView::CrookMarkedObj(const Point& rRef, const Point& rRad, SdrCrookMode eMode,
+    bool bVertical, bool bNoContortion, bool bCopy)
+{
+    tools::Rectangle aMarkRect(GetMarkedObjRect());
+    const bool bUndo = IsUndoEnabled();
+
+    bool bRotate=bNoContortion && eMode==SdrCrookMode::Rotate && IsRotateAllowed();
+
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr {ImpGetDescriptionString(bNoContortion ? STR_EditCrook : STR_EditCrookContortion)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+
+        const SdrObjList* pOL=pO->GetSubList();
+        if (bNoContortion || pOL==nullptr) {
+            ImpCrookObj(pO,rRef,rRad,eMode,bVertical,bNoContortion,bRotate,aMarkRect);
+        } else {
+            SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
+            while (aIter.IsMore()) {
+                SdrObject* pO1=aIter.Next();
+                ImpCrookObj(pO1,rRef,rRad,eMode,bVertical,bNoContortion,bRotate,aMarkRect);
+            }
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::ImpDistortObj(SdrObject* pO, const tools::Rectangle& rRef, const XPolygon& rDistortedRect, bool bNoContortion)
+{
+    SdrPathObj* pPath = dynamic_cast<SdrPathObj*>( pO );
+
+    if(!bNoContortion && pPath)
+    {
+        XPolyPolygon aXPP(pPath->GetPathPoly());
+        aXPP.Distort(rRef, rDistortedRect);
+        pPath->SetPathPoly(aXPP.getB2DPolyPolygon());
+    }
+    else if(pO->IsPolyObj())
+    {
+        // e. g. for the measurement object
+        sal_uInt32 nPointCount(pO->GetPointCount());
+        XPolygon aXP(static_cast<sal_uInt16>(nPointCount));
+        sal_uInt32 nPtNum;
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            Point aPt(pO->GetPoint(nPtNum));
+            aXP[static_cast<sal_uInt16>(nPtNum)]=aPt;
+        }
+
+        aXP.Distort(rRef, rDistortedRect);
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            // broadcasting could be optimized here, but for the
+            // current two points of the measurement object it's fine
+            pO->SetPoint(aXP[static_cast<sal_uInt16>(nPtNum)],nPtNum);
+        }
+    }
+}
+
+void SdrEditView::DistortMarkedObj(const tools::Rectangle& rRef, const XPolygon& rDistortedRect, bool bNoContortion, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr {ImpGetDescriptionString(STR_EditDistort)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+
+        tools::Rectangle aRefRect(rRef);
+        const SdrObjList* pOL=pO->GetSubList();
+        if (bNoContortion || pOL==nullptr) {
+            ImpDistortObj(pO,aRefRect,rDistortedRect,bNoContortion);
+        } else {
+            SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
+            while (aIter.IsMore()) {
+                SdrObject* pO1=aIter.Next();
+                ImpDistortObj(pO1,aRefRect,rDistortedRect,bNoContortion);
+            }
+        }
+    }
+    if( bUndo )
+        EndUndo();
+}
+
+
+void SdrEditView::SetNotPersistAttrToMarked(const SfxItemSet& rAttr)
+{
+    // bReplaceAll has no effect here
+    tools::Rectangle aAllSnapRect(GetMarkedObjRect());
+    const SfxPoolItem *pPoolItem=nullptr;
+    if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1X,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrTransformRef1XItem*>(pPoolItem)->GetValue();
+        SetRef1(Point(n,GetRef1().Y()));
+    }
+    if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1Y,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrTransformRef1YItem*>(pPoolItem)->GetValue();
+        SetRef1(Point(GetRef1().X(),n));
+    }
+    if (rAttr.GetItemState(SDRATTR_TRANSFORMREF2X,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrTransformRef2XItem*>(pPoolItem)->GetValue();
+        SetRef2(Point(n,GetRef2().Y()));
+    }
+    if (rAttr.GetItemState(SDRATTR_TRANSFORMREF2Y,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrTransformRef2YItem*>(pPoolItem)->GetValue();
+        SetRef2(Point(GetRef2().X(),n));
+    }
+    long nAllPosX=0; bool bAllPosX=false;
+    long nAllPosY=0; bool bAllPosY=false;
+    long nAllWdt=0;  bool bAllWdt=false;
+    long nAllHgt=0;  bool bAllHgt=false;
+    bool bDoIt=false;
+    if (rAttr.GetItemState(SDRATTR_ALLPOSITIONX,true,&pPoolItem)==SfxItemState::SET) {
+        nAllPosX=static_cast<const SdrAllPositionXItem*>(pPoolItem)->GetValue();
+        bAllPosX=true; bDoIt=true;
+    }
+    if (rAttr.GetItemState(SDRATTR_ALLPOSITIONY,true,&pPoolItem)==SfxItemState::SET) {
+        nAllPosY=static_cast<const SdrAllPositionYItem*>(pPoolItem)->GetValue();
+        bAllPosY=true; bDoIt=true;
+    }
+    if (rAttr.GetItemState(SDRATTR_ALLSIZEWIDTH,true,&pPoolItem)==SfxItemState::SET) {
+        nAllWdt=static_cast<const SdrAllSizeWidthItem*>(pPoolItem)->GetValue();
+        bAllWdt=true; bDoIt=true;
+    }
+    if (rAttr.GetItemState(SDRATTR_ALLSIZEHEIGHT,true,&pPoolItem)==SfxItemState::SET) {
+        nAllHgt=static_cast<const SdrAllSizeHeightItem*>(pPoolItem)->GetValue();
+        bAllHgt=true; bDoIt=true;
+    }
+    if (bDoIt) {
+        tools::Rectangle aRect(aAllSnapRect); // TODO: change this for PolyPt's and GluePt's!!!
+        if (bAllPosX) aRect.Move(nAllPosX-aRect.Left(),0);
+        if (bAllPosY) aRect.Move(0,nAllPosY-aRect.Top());
+        if (bAllWdt)  aRect.SetRight(aAllSnapRect.Left()+nAllWdt );
+        if (bAllHgt)  aRect.SetBottom(aAllSnapRect.Top()+nAllHgt );
+        SetMarkedObjRect(aRect);
+    }
+    if (rAttr.GetItemState(SDRATTR_RESIZEXALL,true,&pPoolItem)==SfxItemState::SET) {
+        Fraction aXFact=static_cast<const SdrResizeXAllItem*>(pPoolItem)->GetValue();
+        ResizeMarkedObj(aAllSnapRect.TopLeft(),aXFact,Fraction(1,1));
+    }
+    if (rAttr.GetItemState(SDRATTR_RESIZEYALL,true,&pPoolItem)==SfxItemState::SET) {
+        Fraction aYFact=static_cast<const SdrResizeYAllItem*>(pPoolItem)->GetValue();
+        ResizeMarkedObj(aAllSnapRect.TopLeft(),Fraction(1,1),aYFact);
+    }
+    if (rAttr.GetItemState(SDRATTR_ROTATEALL,true,&pPoolItem)==SfxItemState::SET) {
+        long nAngle=static_cast<const SdrRotateAllItem*>(pPoolItem)->GetValue();
+        RotateMarkedObj(aAllSnapRect.Center(),nAngle);
+    }
+    if (rAttr.GetItemState(SDRATTR_HORZSHEARALL,true,&pPoolItem)==SfxItemState::SET) {
+        long nAngle=static_cast<const SdrHorzShearAllItem*>(pPoolItem)->GetValue();
+        ShearMarkedObj(aAllSnapRect.Center(),nAngle);
+    }
+    if (rAttr.GetItemState(SDRATTR_VERTSHEARALL,true,&pPoolItem)==SfxItemState::SET) {
+        long nAngle=static_cast<const SdrVertShearAllItem*>(pPoolItem)->GetValue();
+        ShearMarkedObj(aAllSnapRect.Center(),nAngle,true);
+    }
+
+    const bool bUndo = IsUndoEnabled();
+
+    // TODO: check if WhichRange is necessary.
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        const SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+
+        pObj->ApplyNotPersistAttr(rAttr);
+    }
+}
+
+void SdrEditView::MergeNotPersistAttrFromMarked(SfxItemSet& rAttr) const
+{
+    // TODO: Take into account the origin and PvPos.
+    tools::Rectangle aAllSnapRect(GetMarkedObjRect()); // TODO: change this for PolyPt's and GluePt's!!!
+    long nAllSnapPosX=aAllSnapRect.Left();
+    long nAllSnapPosY=aAllSnapRect.Top();
+    long nAllSnapWdt=aAllSnapRect.GetWidth()-1;
+    long nAllSnapHgt=aAllSnapRect.GetHeight()-1;
+    // TODO: could go into CheckPossibilities
+    bool bMovProtect = false, bMovProtectDC = false;
+    bool bSizProtect = false, bSizProtectDC = false;
+    bool bPrintable = true, bPrintableDC = false;
+    bool bVisible = true, bVisibleDC = false;
+    SdrLayerID nLayerId(0);
+    bool bLayerDC=false;
+    long nSnapPosX=0;      bool bSnapPosXDC=false;
+    long nSnapPosY=0;      bool bSnapPosYDC=false;
+    long nSnapWdt=0;       bool bSnapWdtDC=false;
+    long nSnapHgt=0;       bool bSnapHgtDC=false;
+    long nLogicWdt=0;      bool bLogicWdtDC=false,bLogicWdtDiff=false;
+    long nLogicHgt=0;      bool bLogicHgtDC=false,bLogicHgtDiff=false;
+    long nRotAngle=0;      bool bRotAngleDC=false;
+    long nShrAngle=0;      bool bShrAngleDC=false;
+    tools::Rectangle aSnapRect;
+    tools::Rectangle aLogicRect;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm) {
+        const SdrMark* pM=GetSdrMarkByIndex(nm);
+        const SdrObject* pObj=pM->GetMarkedSdrObj();
+        if (nm==0) {
+            nLayerId=pObj->GetLayer();
+            bMovProtect=pObj->IsMoveProtect();
+            bSizProtect=pObj->IsResizeProtect();
+            bPrintable =pObj->IsPrintable();
+            bVisible = pObj->IsVisible();
+            tools::Rectangle aSnapRect2(pObj->GetSnapRect());
+            tools::Rectangle aLogicRect2(pObj->GetLogicRect());
+            nSnapPosX=aSnapRect2.Left();
+            nSnapPosY=aSnapRect2.Top();
+            nSnapWdt=aSnapRect2.GetWidth()-1;
+            nSnapHgt=aSnapRect2.GetHeight()-1;
+            nLogicWdt=aLogicRect2.GetWidth()-1;
+            nLogicHgt=aLogicRect2.GetHeight()-1;
+            bLogicWdtDiff=nLogicWdt!=nSnapWdt;
+            bLogicHgtDiff=nLogicHgt!=nSnapHgt;
+            nRotAngle=pObj->GetRotateAngle();
+            nShrAngle=pObj->GetShearAngle();
+        } else {
+            if (!bLayerDC      && nLayerId   !=pObj->GetLayer())        bLayerDC = true;
+            if (!bMovProtectDC && bMovProtect!=pObj->IsMoveProtect())   bMovProtectDC = true;
+            if (!bSizProtectDC && bSizProtect!=pObj->IsResizeProtect()) bSizProtectDC = true;
+            if (!bPrintableDC  && bPrintable !=pObj->IsPrintable())     bPrintableDC = true;
+            if (!bVisibleDC    && bVisible !=pObj->IsVisible())         bVisibleDC=true;
+            if (!bRotAngleDC   && nRotAngle  !=pObj->GetRotateAngle())  bRotAngleDC=true;
+            if (!bShrAngleDC   && nShrAngle  !=pObj->GetShearAngle())   bShrAngleDC=true;
+            if (!bSnapWdtDC || !bSnapHgtDC || !bSnapPosXDC || !bSnapPosYDC || !bLogicWdtDiff || !bLogicHgtDiff) {
+                aSnapRect=pObj->GetSnapRect();
+                if (nSnapPosX!=aSnapRect.Left()) bSnapPosXDC=true;
+                if (nSnapPosY!=aSnapRect.Top()) bSnapPosYDC=true;
+                if (nSnapWdt!=aSnapRect.GetWidth()-1) bSnapWdtDC=true;
+                if (nSnapHgt!=aSnapRect.GetHeight()-1) bSnapHgtDC=true;
+            }
+            if (!bLogicWdtDC || !bLogicHgtDC || !bLogicWdtDiff || !bLogicHgtDiff) {
+                aLogicRect=pObj->GetLogicRect();
+                if (nLogicWdt!=aLogicRect.GetWidth()-1) bLogicWdtDC=true;
+                if (nLogicHgt!=aLogicRect.GetHeight()-1) bLogicHgtDC=true;
+                if (!bLogicWdtDiff && aSnapRect.GetWidth()!=aLogicRect.GetWidth()) bLogicWdtDiff=true;
+                if (!bLogicHgtDiff && aSnapRect.GetHeight()!=aLogicRect.GetHeight()) bLogicHgtDiff=true;
+            }
+        }
+    }
+
+    if (bSnapPosXDC || nAllSnapPosX!=nSnapPosX) rAttr.Put(SdrAllPositionXItem(nAllSnapPosX));
+    if (bSnapPosYDC || nAllSnapPosY!=nSnapPosY) rAttr.Put(SdrAllPositionYItem(nAllSnapPosY));
+    if (bSnapWdtDC  || nAllSnapWdt !=nSnapWdt ) rAttr.Put(SdrAllSizeWidthItem(nAllSnapWdt));
+    if (bSnapHgtDC  || nAllSnapHgt !=nSnapHgt ) rAttr.Put(SdrAllSizeHeightItem(nAllSnapHgt));
+
+    // items for pure transformations
+    rAttr.Put(SdrMoveXItem());
+    rAttr.Put(SdrMoveYItem());
+    rAttr.Put(SdrResizeXOneItem());
+    rAttr.Put(SdrResizeYOneItem());
+    rAttr.Put(SdrRotateOneItem());
+    rAttr.Put(SdrHorzShearOneItem());
+    rAttr.Put(SdrVertShearOneItem());
+
+    if (nMarkCount>1) {
+        rAttr.Put(SdrResizeXAllItem());
+        rAttr.Put(SdrResizeYAllItem());
+        rAttr.Put(SdrRotateAllItem());
+        rAttr.Put(SdrHorzShearAllItem());
+        rAttr.Put(SdrVertShearAllItem());
+    }
+
+    if(meDragMode == SdrDragMode::Rotate || meDragMode == SdrDragMode::Mirror)
+    {
+        rAttr.Put(SdrTransformRef1XItem(GetRef1().X()));
+        rAttr.Put(SdrTransformRef1YItem(GetRef1().Y()));
+    }
+
+    if(meDragMode == SdrDragMode::Mirror)
+    {
+        rAttr.Put(SdrTransformRef2XItem(GetRef2().X()));
+        rAttr.Put(SdrTransformRef2YItem(GetRef2().Y()));
+    }
+}
+
+SfxItemSet SdrEditView::GetAttrFromMarked(bool bOnlyHardAttr) const
+{
+    SfxItemSet aSet(mpModel->GetItemPool());
+    MergeAttrFromMarked(aSet,bOnlyHardAttr);
+    //the EE_FEATURE items should not be set with SetAttrToMarked (see error message there)
+    //so we do not set them here
+    // #i32448#
+    // Do not disable, but clear the items.
+    aSet.ClearItem(EE_FEATURE_TAB);
+    aSet.ClearItem(EE_FEATURE_LINEBR);
+    aSet.ClearItem(EE_FEATURE_NOTCONV);
+    aSet.ClearItem(EE_FEATURE_FIELD);
+
+    return aSet;
+}
+
+void SdrEditView::MergeAttrFromMarked(SfxItemSet& rAttr, bool bOnlyHardAttr) const
+{
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    for(size_t a = 0; a < nMarkCount; ++a)
+    {
+        // #80277# merging was done wrong in the prev version
+        const SfxItemSet& rSet = GetMarkedObjectByIndex(a)->GetMergedItemSet();
+        SfxWhichIter aIter(rSet);
+        sal_uInt16 nWhich(aIter.FirstWhich());
+
+        while(nWhich)
+        {
+            if(!bOnlyHardAttr)
+            {
+                if(SfxItemState::DONTCARE == rSet.GetItemState(nWhich, false))
+                    rAttr.InvalidateItem(nWhich);
+                else
+                    rAttr.MergeValue(rSet.Get(nWhich), true);
+            }
+            else if(SfxItemState::SET == rSet.GetItemState(nWhich, false))
+            {
+                const SfxPoolItem& rItem = rSet.Get(nWhich);
+                rAttr.MergeValue(rItem, true);
+            }
+
+            if (comphelper::LibreOfficeKit::isActive())
+            {
+                OUString sPayload;
+                switch(nWhich)
+                {
+                    case XATTR_LINECOLOR:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINECOLOR);
+                        if (pItem)
+                        {
+                            Color aColor = static_cast<const XLineColorItem*>(pItem)->GetColorValue();
+                            sPayload = OUString::number(static_cast<sal_uInt32>(aColor));
+
+                            sPayload = ".uno:XLineColor=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_FILLCOLOR:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_FILLCOLOR);
+                        if (pItem)
+                        {
+                            Color aColor = static_cast<const XFillColorItem*>(pItem)->GetColorValue();
+                            sPayload = OUString::number(static_cast<sal_uInt32>(aColor));
+
+                            sPayload = ".uno:FillColor=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_FILLTRANSPARENCE:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_FILLTRANSPARENCE);
+                        if (pItem)
+                        {
+                            sal_uInt16 nTransparency = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
+                            sPayload = OUString::number(nTransparency);
+
+                            sPayload = ".uno:FillTransparence=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_LINETRANSPARENCE:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINETRANSPARENCE);
+                        if (pItem)
+                        {
+                            sal_uInt16 nTransparency = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
+                            sPayload = OUString::number(nTransparency);
+
+                            sPayload = ".uno:LineTransparence=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_LINEWIDTH:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINEWIDTH);
+                        if (pItem)
+                        {
+                            sal_uInt32 nWidth = static_cast<const XLineWidthItem*>(pItem)->GetValue();
+                            sPayload = OUString::number(nWidth);
+
+                            sPayload = ".uno:LineWidth=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case SDRATTR_SHADOWTRANSPARENCE:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(SDRATTR_SHADOWTRANSPARENCE);
+                        if (pItem)
+                        {
+                            sal_uInt16 nWidth = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
+                            sPayload = OUString::number(nWidth);
+
+                            sPayload = ".uno:FillShadowTransparency=" + sPayload;
+                        }
+                        break;
+                    }
+                }
+
+                if (!sPayload.isEmpty())
+                    GetSfxViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED,
+                        OUStringToOString(sPayload, RTL_TEXTENCODING_ASCII_US).getStr());
+            }
+
+            nWhich = aIter.NextWhich();
+        }
+    }
+}
+
+std::vector<sal_uInt16> GetAllCharPropIds(const SfxItemSet& rSet)
+{
+    std::vector<sal_uInt16> aCharWhichIds;
+    {
+        SfxItemIter aIter(rSet);
+        for (const SfxPoolItem* pItem = aIter.GetCurItem(); pItem; pItem = aIter.NextItem())
+        {
+            if (!IsInvalidItem(pItem))
+            {
+                sal_uInt16 nWhich = pItem->Which();
+                if (nWhich>=EE_CHAR_START && nWhich<=EE_CHAR_END)
+                    aCharWhichIds.push_back( nWhich );
+            }
+        }
+    }
+    return aCharWhichIds;
+}
+
+void SdrEditView::SetAttrToMarked(const SfxItemSet& rAttr, bool bReplaceAll)
+{
+    if (!AreObjectsMarked())
+        return;
+
+#ifdef DBG_UTIL
+    {
+        bool bHasEEFeatureItems=false;
+        SfxItemIter aIter(rAttr);
+        for (const SfxPoolItem* pItem = aIter.GetCurItem(); !bHasEEFeatureItems && pItem;
+             pItem = aIter.NextItem())
+        {
+            if (!IsInvalidItem(pItem)) {
+                sal_uInt16 nW=pItem->Which();
+                if (nW>=EE_FEATURE_START && nW<=EE_FEATURE_END) bHasEEFeatureItems=true;
+            }
+        }
+        if(bHasEEFeatureItems)
+        {
+            const OUString aMessage("SdrEditView::SetAttrToMarked(): Setting EE_FEATURE items at the SdrView does not make sense! It only leads to overhead and unreadable documents.");
+            std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(nullptr,
+                                                          VclMessageType::Info, VclButtonsType::Ok,
+                                                          aMessage));
+            xInfoBox->run();
+        }
+    }
+#endif
+
+    // #103836# if the user sets character attributes to the complete shape,
+    //          we want to remove all hard set character attributes with same
+    //          which ids from the text. We do that later but here we remember
+    //          all character attribute which id's that are set.
+    std::vector<sal_uInt16> aCharWhichIds(GetAllCharPropIds(rAttr));
+
+    // To make Undo reconstruct text attributes correctly after Format.Standard
+    bool bHasEEItems=SearchOutlinerItems(rAttr,bReplaceAll);
+
+    // save additional geometry information when paragraph or character attributes
+    // are changed and the geometrical shape of the text object might be changed
+    bool bPossibleGeomChange(false);
+    SfxWhichIter aIter(rAttr);
+    sal_uInt16 nWhich = aIter.FirstWhich();
+    while(!bPossibleGeomChange && nWhich)
+    {
+        SfxItemState eState = rAttr.GetItemState(nWhich);
+        if(eState == SfxItemState::SET)
+        {
+            if((nWhich >= SDRATTR_TEXT_MINFRAMEHEIGHT && nWhich <= SDRATTR_TEXT_CONTOURFRAME)
+                || nWhich == SDRATTR_3DOBJ_PERCENT_DIAGONAL
+                || nWhich == SDRATTR_3DOBJ_BACKSCALE
+                || nWhich == SDRATTR_3DOBJ_DEPTH
+                || nWhich == SDRATTR_3DOBJ_END_ANGLE
+                || nWhich == SDRATTR_3DSCENE_DISTANCE)
+            {
+                bPossibleGeomChange = true;
+            }
+        }
+        nWhich = aIter.NextWhich();
+    }
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        BegUndo(ImpGetDescriptionString(STR_EditSetAttributes));
+    }
+
+    const size_t nMarkCount(GetMarkedObjectCount());
+    std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
+
+    // create ItemSet without SfxItemState::DONTCARE. Put()
+    // uses its second parameter (bInvalidAsDefault) to
+    // remove all such items to set them to default.
+    SfxItemSet aAttr(*rAttr.GetPool(), rAttr.GetRanges());
+    aAttr.Put(rAttr);
+
+    // #i38135#
+    bool bResetAnimationTimer(false);
+
+    const bool bLineStartWidthExplicitChange(SfxItemState::SET
+                                             == aAttr.GetItemState(XATTR_LINESTARTWIDTH));
+    const bool bLineEndWidthExplicitChange(SfxItemState::SET
+                                           == aAttr.GetItemState(XATTR_LINEENDWIDTH));
+    // check if LineWidth is part of the change
+    const bool bAdaptStartEndWidths(!(bLineStartWidthExplicitChange && bLineEndWidthExplicitChange)
+                                     && SfxItemState::SET == aAttr.GetItemState(XATTR_LINEWIDTH));
+    sal_Int32 nNewLineWidth(0);
+
+    if(bAdaptStartEndWidths)
+    {
+        nNewLineWidth = aAttr.Get(XATTR_LINEWIDTH).GetValue();
+    }
+
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj = pM->GetMarkedSdrObj();
+
+        if( bUndo )
+        {
+            SdrEdgeObj* pEdgeObj = dynamic_cast< SdrEdgeObj* >( pObj );
+            if ( pEdgeObj )
+                bPossibleGeomChange = true;
+            else
+                AddUndoActions( CreateConnectorUndo( *pObj ) );
+        }
+
+        // new geometry undo
+        if(bPossibleGeomChange && bUndo)
+        {
+            // save position and size of object, too
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+        }
+
+        if( bUndo )
+        {
+            // #i8508#
+            // If this is a text object also rescue the OutlinerParaObject since
+            // applying attributes to the object may change text layout when
+            // multiple portions exist with multiple formats. If an OutlinerParaObject
+            // really exists and needs to be rescued is evaluated in the undo
+            // implementation itself.
+            const bool bRescueText = dynamic_cast< SdrTextObj* >(pObj) != nullptr;
+
+            // add attribute undo
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj,false,bHasEEItems || bPossibleGeomChange || bRescueText));
+        }
+
+        // set up a scene updater if object is a 3d object
+        if(dynamic_cast< E3dObject* >(pObj))
+        {
+            aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pObj));
+        }
+
+        sal_Int32 nOldLineWidth(0);
+        if (bAdaptStartEndWidths)
+        {
+            nOldLineWidth = pObj->GetMergedItem(XATTR_LINEWIDTH).GetValue();
+        }
+
+        // set attributes at object
+        pObj->SetMergedItemSetAndBroadcast(aAttr, bReplaceAll);
+
+        if(bAdaptStartEndWidths)
+        {
+            const SfxItemSet& rSet = pObj->GetMergedItemSet();
+
+            if(nOldLineWidth != nNewLineWidth)
+            {
+                if(SfxItemState::DONTCARE != rSet.GetItemState(XATTR_LINESTARTWIDTH))
+                {
+                    const sal_Int32 nValAct(rSet.Get(XATTR_LINESTARTWIDTH).GetValue());
+                    const sal_Int32 nValNewStart(std::max(sal_Int32(0), nValAct + (((nNewLineWidth - nOldLineWidth) * 15) / 10)));
+
+                    pObj->SetMergedItem(XLineStartWidthItem(nValNewStart));
+                }
+
+                if(SfxItemState::DONTCARE != rSet.GetItemState(XATTR_LINEENDWIDTH))
+                {
+                    const sal_Int32 nValAct(rSet.Get(XATTR_LINEENDWIDTH).GetValue());
+                    const sal_Int32 nValNewEnd(std::max(sal_Int32(0), nValAct + (((nNewLineWidth - nOldLineWidth) * 15) / 10)));
+
+                    pObj->SetMergedItem(XLineEndWidthItem(nValNewEnd));
+                }
+            }
+        }
+
+        if(dynamic_cast<const SdrTextObj*>( pObj) !=  nullptr)
+        {
+            SdrTextObj* pTextObj = static_cast<SdrTextObj*>(pObj);
+
+            if(!aCharWhichIds.empty())
+            {
+                tools::Rectangle aOldBoundRect = pTextObj->GetLastBoundRect();
+
+                // #110094#-14 pTextObj->SendRepaintBroadcast(pTextObj->GetBoundRect());
+                pTextObj->RemoveOutlinerCharacterAttribs( aCharWhichIds );
+
+                // object has changed, should be called from
+                // RemoveOutlinerCharacterAttribs. This will change when the text
+                // object implementation changes.
+                pTextObj->SetChanged();
+
+                pTextObj->BroadcastObjectChange();
+                pTextObj->SendUserCall(SdrUserCallType::ChangeAttr, aOldBoundRect);
+            }
+        }
+
+        // #i38495#
+        if(!bResetAnimationTimer)
+        {
+            if(pObj->GetViewContact().isAnimatedInAnyViewObjectContact())
+            {
+                bResetAnimationTimer = true;
+            }
+        }
+    }
+
+    // fire scene updaters
+    while(!aUpdaters.empty())
+    {
+        delete aUpdaters.back();
+        aUpdaters.pop_back();
+    }
+
+    // #i38135#
+    if(bResetAnimationTimer)
+    {
+        SetAnimationTimer(0);
+    }
+
+    // better check before what to do:
+    // pObj->SetAttr() or SetNotPersistAttr()
+    // TODO: missing implementation!
+    SetNotPersistAttrToMarked(rAttr);
+
+    if( bUndo )
+        EndUndo();
+}
+
+SfxStyleSheet* SdrEditView::GetStyleSheetFromMarked() const
+{
+    SfxStyleSheet* pRet=nullptr;
+    bool b1st=true;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SfxStyleSheet* pSS=pM->GetMarkedSdrObj()->GetStyleSheet();
+        if (b1st) pRet=pSS;
+        else if (pRet!=pSS) return nullptr; // different stylesheets
+        b1st=false;
+    }
+    return pRet;
+}
+
+void SdrEditView::SetStyleSheetToMarked(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    if (AreObjectsMarked())
+    {
+        const bool bUndo = IsUndoEnabled();
+
+        if( bUndo )
+        {
+            EndTextEditAllViews();
+            OUString aStr;
+            if (pStyleSheet!=nullptr)
+                aStr = ImpGetDescriptionString(STR_EditSetStylesheet);
+            else
+                aStr = ImpGetDescriptionString(STR_EditDelStylesheet);
+            BegUndo(aStr);
+        }
+
+        const size_t nMarkCount=GetMarkedObjectCount();
+        for (size_t nm=0; nm<nMarkCount; ++nm)
+        {
+            SdrMark* pM=GetSdrMarkByIndex(nm);
+            if( bUndo )
+            {
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pM->GetMarkedSdrObj()));
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pM->GetMarkedSdrObj(),true,true));
+            }
+            pM->GetMarkedSdrObj()->SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
+        }
+
+        if( bUndo )
+            EndUndo();
+    }
+}
+
+
+void SdrEditView::GetAttributes(SfxItemSet& rTargetSet, bool bOnlyHardAttr) const
+{
+    if(GetMarkedObjectCount())
+    {
+        rTargetSet.Put(GetAttrFromMarked(bOnlyHardAttr), false);
+    }
+    else
+    {
+        SdrMarkView::GetAttributes(rTargetSet, bOnlyHardAttr);
+    }
+}
+
+void SdrEditView::SetAttributes(const SfxItemSet& rSet, bool bReplaceAll)
+{
+    if (GetMarkedObjectCount()!=0) {
+        SetAttrToMarked(rSet,bReplaceAll);
+    } else {
+        SdrMarkView::SetAttributes(rSet,bReplaceAll);
+    }
+}
+
+SfxStyleSheet* SdrEditView::GetStyleSheet() const
+{
+    if (GetMarkedObjectCount()!=0) {
+        return GetStyleSheetFromMarked();
+    } else {
+        return SdrMarkView::GetStyleSheet();
+    }
+}
+
+void SdrEditView::SetStyleSheet(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    if (GetMarkedObjectCount()!=0) {
+        SetStyleSheetToMarked(pStyleSheet,bDontRemoveHardAttr);
+    } else {
+        SdrMarkView::SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
+    }
+}
+
+
+SfxItemSet SdrEditView::GetGeoAttrFromMarked() const
+{
+    SfxItemSet aRetSet(
+        mpModel->GetItemPool(),
+        svl::Items< // SID_ATTR_TRANSFORM_... from s:svxids.hrc
+            SDRATTR_ECKENRADIUS, SDRATTR_ECKENRADIUS,
+            SID_ATTR_TRANSFORM_POS_X, SID_ATTR_TRANSFORM_ANGLE,
+            SID_ATTR_TRANSFORM_PROTECT_POS, SID_ATTR_TRANSFORM_AUTOHEIGHT>{});
+
+    if (AreObjectsMarked())
+    {
+        SfxItemSet aMarkAttr(GetAttrFromMarked(false)); // because of AutoGrowHeight and corner radius
+        tools::Rectangle aRect(GetMarkedObjRect());
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->LogicToPagePos(aRect);
+        }
+
+        // position
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_X,aRect.Left()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_Y,aRect.Top()));
+
+        // size
+        long nResizeRefX=aRect.Left();
+        long nResizeRefY=aRect.Top();
+        if (meDragMode==SdrDragMode::Rotate) { // use rotation axis as a reference for resizing, too
+            nResizeRefX=maRef1.X();
+            nResizeRefY=maRef1.Y();
+        }
+        aRetSet.Put(SfxUInt32Item(SID_ATTR_TRANSFORM_WIDTH,aRect.Right()-aRect.Left()));
+        aRetSet.Put(SfxUInt32Item(SID_ATTR_TRANSFORM_HEIGHT,aRect.Bottom()-aRect.Top()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_RESIZE_REF_X,nResizeRefX));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_RESIZE_REF_Y,nResizeRefY));
+
+        Point aRotateAxe(maRef1);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->LogicToPagePos(aRotateAxe);
+        }
+
+        // rotation
+        long nRotateRefX=aRect.Center().X();
+        long nRotateRefY=aRect.Center().Y();
+        if (meDragMode==SdrDragMode::Rotate) {
+            nRotateRefX=aRotateAxe.X();
+            nRotateRefY=aRotateAxe.Y();
+        }
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ANGLE,GetMarkedObjRotate()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_X,nRotateRefX));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_Y,nRotateRefY));
+
+        // shearing
+        long nShearRefX=aRect.Left();
+        long nShearRefY=aRect.Bottom();
+        if (meDragMode==SdrDragMode::Rotate) { // use rotation axis as a reference for shearing, too
+            nShearRefX=aRotateAxe.X();
+            nShearRefY=aRotateAxe.Y();
+        }
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR,GetMarkedObjShear()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X,nShearRefX));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y,nShearRefY));
+
+        // check every object whether it is protected
+        const SdrMarkList& rMarkList=GetMarkedObjectList();
+        const size_t nMarkCount=rMarkList.GetMarkCount();
+        SdrObject* pObj=rMarkList.GetMark(0)->GetMarkedSdrObj();
+        bool bPosProt=pObj->IsMoveProtect();
+        bool bSizProt=pObj->IsResizeProtect();
+        bool bPosProtDontCare=false;
+        bool bSizProtDontCare=false;
+        for (size_t i=1; i<nMarkCount && (!bPosProtDontCare || !bSizProtDontCare); ++i)
+        {
+            pObj=rMarkList.GetMark(i)->GetMarkedSdrObj();
+            if (bPosProt!=pObj->IsMoveProtect()) bPosProtDontCare=true;
+            if (bSizProt!=pObj->IsResizeProtect()) bSizProtDontCare=true;
+        }
+
+        // InvalidateItem sets item to DONT_CARE
+        if (bPosProtDontCare) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_PROTECT_POS);
+        } else {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_PROTECT_POS,bPosProt));
+        }
+        if (bSizProtDontCare) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_PROTECT_SIZE);
+        } else {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_PROTECT_SIZE,bSizProt));
+        }
+
+        SfxItemState eState=aMarkAttr.GetItemState(SDRATTR_TEXT_AUTOGROWWIDTH);
+        bool bAutoGrow=aMarkAttr.Get(SDRATTR_TEXT_AUTOGROWWIDTH).GetValue();
+        if (eState==SfxItemState::DONTCARE) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_AUTOWIDTH);
+        } else if (eState==SfxItemState::SET) {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_AUTOWIDTH,bAutoGrow));
+        }
+
+        eState=aMarkAttr.GetItemState(SDRATTR_TEXT_AUTOGROWHEIGHT);
+        bAutoGrow=aMarkAttr.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue();
+        if (eState==SfxItemState::DONTCARE) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_AUTOHEIGHT);
+        } else if (eState==SfxItemState::SET) {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_AUTOHEIGHT,bAutoGrow));
+        }
+
+        eState=aMarkAttr.GetItemState(SDRATTR_ECKENRADIUS);
+        long nRadius=aMarkAttr.Get(SDRATTR_ECKENRADIUS).GetValue();
+        if (eState==SfxItemState::DONTCARE) {
+            aRetSet.InvalidateItem(SDRATTR_ECKENRADIUS);
+        } else if (eState==SfxItemState::SET) {
+            aRetSet.Put(makeSdrEckenradiusItem(nRadius));
+        }
+
+        basegfx::B2DHomMatrix aTransformation;
+
+        if(nMarkCount > 1)
+        {
+            // multiple objects, range is collected in aRect
+            aTransformation = basegfx::utils::createScaleTranslateB2DHomMatrix(
+                aRect.Left(), aRect.Top(),
+                aRect.getWidth(), aRect.getHeight());
+        }
+        else
+        {
+            // single object, get homogen transformation
+            basegfx::B2DPolyPolygon aPolyPolygon;
+
+            pObj->TRGetBaseGeometry(aTransformation, aPolyPolygon);
+        }
+
+        if(aTransformation.isIdentity())
+        {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_MATRIX);
+        }
+        else
+        {
+            css::geometry::AffineMatrix2D aAffineMatrix2D;
+            Point aPageOffset(0, 0);
+
+            if(GetSdrPageView())
+            {
+                aPageOffset = GetSdrPageView()->GetPageOrigin();
+            }
+
+            aAffineMatrix2D.m00 = aTransformation.get(0, 0);
+            aAffineMatrix2D.m01 = aTransformation.get(0, 1);
+            aAffineMatrix2D.m02 = aTransformation.get(0, 2) - aPageOffset.X();
+            aAffineMatrix2D.m10 = aTransformation.get(1, 0);
+            aAffineMatrix2D.m11 = aTransformation.get(1, 1);
+            aAffineMatrix2D.m12 = aTransformation.get(1, 2) - aPageOffset.Y();
+
+            aRetSet.Put(AffineMatrixItem(&aAffineMatrix2D));
+        }
+    }
+
+    return aRetSet;
+}
+
+static Point ImpGetPoint(const tools::Rectangle& rRect, RectPoint eRP)
+{
+    switch(eRP) {
+        case RectPoint::LT: return rRect.TopLeft();
+        case RectPoint::MT: return rRect.TopCenter();
+        case RectPoint::RT: return rRect.TopRight();
+        case RectPoint::LM: return rRect.LeftCenter();
+        case RectPoint::MM: return rRect.Center();
+        case RectPoint::RM: return rRect.RightCenter();
+        case RectPoint::LB: return rRect.BottomLeft();
+        case RectPoint::MB: return rRect.BottomCenter();
+        case RectPoint::RB: return rRect.BottomRight();
+    }
+    return Point(); // Should not happen!
+}
+
+void SdrEditView::SetGeoAttrToMarked(const SfxItemSet& rAttr)
+{
+    const bool bTiledRendering = comphelper::LibreOfficeKit::isActive();
+
+    tools::Rectangle aRect(GetMarkedObjRect());
+
+    if(GetSdrPageView())
+    {
+        GetSdrPageView()->LogicToPagePos(aRect);
+    }
+
+    long nOldRotateAngle=GetMarkedObjRotate();
+    long nOldShearAngle=GetMarkedObjShear();
+    const SdrMarkList& rMarkList=GetMarkedObjectList();
+    const size_t nMarkCount=rMarkList.GetMarkCount();
+    SdrObject* pObj=nullptr;
+
+    RectPoint eSizePoint=RectPoint::MM;
+    long nPosDX=0;
+    long nPosDY=0;
+    long nSizX=0;
+    long nSizY=0;
+    long nRotateAngle=0;
+
+    bool bModeIsRotate(meDragMode == SdrDragMode::Rotate);
+    long nRotateX(0);
+    long nRotateY(0);
+    long nOldRotateX(0);
+    long nOldRotateY(0);
+    if(bModeIsRotate)
+    {
+        Point aRotateAxe(maRef1);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->LogicToPagePos(aRotateAxe);
+        }
+
+        nRotateX = nOldRotateX = aRotateAxe.X();
+        nRotateY = nOldRotateY = aRotateAxe.Y();
+    }
+
+    long nShearAngle=0;
+    long nShearX=0;
+    long nShearY=0;
+    bool bShearVert=false;
+
+    bool bChgPos=false;
+    bool bChgSiz=false;
+    bool bChgWdh=false;
+    bool bChgHgt=false;
+    bool bRotate=false;
+    bool bShear =false;
+
+    bool bSetAttr=false;
+    SfxItemSet aSetAttr(mpModel->GetItemPool());
+
+    const SfxPoolItem* pPoolItem=nullptr;
+
+    // position
+    if (SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_POS_X,true,&pPoolItem)) {
+        nPosDX=static_cast<const SfxInt32Item*>(pPoolItem)->GetValue() - aRect.Left();
+        bChgPos=true;
+    }
+    if (SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_POS_Y,true,&pPoolItem)){
+        nPosDY=static_cast<const SfxInt32Item*>(pPoolItem)->GetValue() - aRect.Top();
+        bChgPos=true;
+    }
+    // size
+    if (SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_WIDTH,true,&pPoolItem)) {
+        nSizX=static_cast<const SfxUInt32Item*>(pPoolItem)->GetValue();
+        bChgSiz=true;
+        bChgWdh=true;
+    }
+    if (SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_HEIGHT,true,&pPoolItem)) {
+        nSizY=static_cast<const SfxUInt32Item*>(pPoolItem)->GetValue();
+        bChgSiz=true;
+        bChgHgt=true;
+    }
+    if (bChgSiz) {
+        if (bTiledRendering && SfxItemState::SET != rAttr.GetItemState(SID_ATTR_TRANSFORM_SIZE_POINT, true, &pPoolItem))
+            eSizePoint = RectPoint::LT;
+        else
+            eSizePoint = static_cast<RectPoint>(rAttr.Get(SID_ATTR_TRANSFORM_SIZE_POINT).GetValue());
+    }
+
+    // rotation
+    if (SfxItemState::SET == rAttr.GetItemState(SID_ATTR_TRANSFORM_DELTA_ANGLE, true, &pPoolItem)) {
+        nRotateAngle = static_cast<const SfxInt32Item*>(pPoolItem)->GetValue();
+        bRotate = (nRotateAngle != 0);
+    }
+
+    // rotation
+    if (SfxItemState::SET == rAttr.GetItemState(SID_ATTR_TRANSFORM_ANGLE, true, &pPoolItem)) {
+        nRotateAngle = static_cast<const SfxInt32Item*>(pPoolItem)->GetValue() - nOldRotateAngle;
+        bRotate = (nRotateAngle != 0);
+    }
+
+    // position rotation point x
+    if(bRotate || SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_ROT_X, true ,&pPoolItem))
+        nRotateX = rAttr.Get(SID_ATTR_TRANSFORM_ROT_X).GetValue();
+
+    // position rotation point y
+    if(bRotate || SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_ROT_Y, true ,&pPoolItem))
+        nRotateY = rAttr.Get(SID_ATTR_TRANSFORM_ROT_Y).GetValue();
+
+    // shearing
+    if (SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_SHEAR,true,&pPoolItem)) {
+        long nNewShearAngle=static_cast<const SfxInt32Item*>(pPoolItem)->GetValue();
+        if (nNewShearAngle>SDRMAXSHEAR) nNewShearAngle=SDRMAXSHEAR;
+        if (nNewShearAngle<-SDRMAXSHEAR) nNewShearAngle=-SDRMAXSHEAR;
+        if (nNewShearAngle!=nOldShearAngle) {
+            bShearVert=static_cast<const SfxBoolItem&>(rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_VERTICAL)).GetValue();
+            if (bShearVert) {
+                nShearAngle=nNewShearAngle;
+            } else {
+                if (nNewShearAngle!=0 && nOldShearAngle!=0) {
+                    // bug fix
+                    double nOld = tan(static_cast<double>(nOldShearAngle) * F_PI18000);
+                    double nNew = tan(static_cast<double>(nNewShearAngle) * F_PI18000);
+                    nNew-=nOld;
+                    nNew = atan(nNew) / F_PI18000;
+                    nShearAngle=FRound(nNew);
+                } else {
+                    nShearAngle=nNewShearAngle-nOldShearAngle;
+                }
+            }
+            bShear=nShearAngle!=0;
+            if (bShear) {
+                nShearX=static_cast<const SfxInt32Item&>(rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_X)).GetValue();
+                nShearY=static_cast<const SfxInt32Item&>(rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_Y)).GetValue();
+            }
+        }
+    }
+
+    // AutoGrow
+    if (SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_AUTOWIDTH,true,&pPoolItem)) {
+        bool bAutoGrow=static_cast<const SfxBoolItem*>(pPoolItem)->GetValue();
+        aSetAttr.Put(makeSdrTextAutoGrowWidthItem(bAutoGrow));
+        bSetAttr=true;
+    }
+
+    if (SfxItemState::SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_AUTOHEIGHT,true,&pPoolItem)) {
+        bool bAutoGrow=static_cast<const SfxBoolItem*>(pPoolItem)->GetValue();
+        aSetAttr.Put(makeSdrTextAutoGrowHeightItem(bAutoGrow));
+        bSetAttr=true;
+    }
+
+    // corner radius
+    if (m_bEdgeRadiusAllowed && SfxItemState::SET==rAttr.GetItemState(SDRATTR_ECKENRADIUS,true,&pPoolItem)) {
+        long nRadius=static_cast<const SdrMetricItem*>(pPoolItem)->GetValue();
+        aSetAttr.Put(makeSdrEckenradiusItem(nRadius));
+        bSetAttr=true;
+    }
+
+    ForcePossibilities();
+
+    BegUndo(SvxResId(STR_EditTransform),GetDescriptionOfMarkedObjects());
+
+    if (bSetAttr) {
+        SetAttrToMarked(aSetAttr,false);
+    }
+
+    // change size and height
+    if (bChgSiz && (m_bResizeFreeAllowed || m_bResizePropAllowed)) {
+        Fraction aWdt(nSizX,aRect.Right()-aRect.Left());
+        Fraction aHgt(nSizY,aRect.Bottom()-aRect.Top());
+        Point aRef(ImpGetPoint(aRect,eSizePoint));
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aRef);
+        }
+
+        ResizeMultMarkedObj(aRef, aWdt, aHgt, bChgWdh, bChgHgt);
+    }
+
+    // rotate
+    if (bRotate && (m_bRotateFreeAllowed || m_bRotate90Allowed)) {
+        Point aRef(nRotateX,nRotateY);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aRef);
+        }
+
+        RotateMarkedObj(aRef,nRotateAngle);
+    }
+
+    // set rotation point position
+    if(bModeIsRotate && (nRotateX != nOldRotateX || nRotateY != nOldRotateY))
+    {
+        Point aNewRef1(nRotateX, nRotateY);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aNewRef1);
+        }
+
+        SetRef1(aNewRef1);
+    }
+
+    // shear
+    if (bShear && m_bShearAllowed) {
+        Point aRef(nShearX,nShearY);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aRef);
+        }
+
+        ShearMarkedObj(aRef,nShearAngle,bShearVert);
+
+        // #i74358#
+        // ShearMarkedObj creates a linear combination of the existing transformation and
+        // the new shear to apply. If the object is already transformed (e.g. rotated) the
+        // linear combination will not decompose to the same start values again, but to a
+        // new combination. Thus it makes no sense to check if the wanted shear is reached
+        // or not. Taking out.
+    }
+
+    // change position
+    if (bChgPos && m_bMoveAllowed) {
+        MoveMarkedObj(Size(nPosDX,nPosDY));
+    }
+
+    // protect position
+    if(SfxItemState::SET == rAttr.GetItemState(SID_ATTR_TRANSFORM_PROTECT_POS, true, &pPoolItem))
+    {
+        const bool bProtPos(static_cast<const SfxBoolItem*>(pPoolItem)->GetValue());
+        bool bChanged(false);
+
+        for(size_t i = 0; i < nMarkCount; ++i)
+        {
+            pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+
+            if(pObj->IsMoveProtect() != bProtPos)
+            {
+                bChanged = true;
+                pObj->SetMoveProtect(bProtPos);
+
+                if(bProtPos)
+                {
+                    pObj->SetResizeProtect(true);
+                }
+            }
+        }
+
+        if(bChanged)
+        {
+            m_bMoveProtect = bProtPos;
+
+            if(bProtPos)
+            {
+                m_bResizeProtect = true;
+            }
+
+            // #i77187# there is no simple method to get the toolbars updated
+            // in the application. The App is listening to selection change and i
+            // will use it here (even if not true). It's acceptable since changing
+            // this model data is pretty rare and only possible using the F4 dialog
+            MarkListHasChanged();
+        }
+    }
+
+    if(!m_bMoveProtect)
+    {
+        // protect size
+        if(SfxItemState::SET == rAttr.GetItemState(SID_ATTR_TRANSFORM_PROTECT_SIZE, true, &pPoolItem))
+        {
+            const bool bProtSize(static_cast<const SfxBoolItem*>(pPoolItem)->GetValue());
+            bool bChanged(false);
+
+            for(size_t i = 0; i < nMarkCount; ++i)
+            {
+                pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+
+                if(pObj->IsResizeProtect() != bProtSize)
+                {
+                    bChanged = true;
+                    pObj->SetResizeProtect(bProtSize);
+                }
+            }
+
+            if(bChanged)
+            {
+                m_bResizeProtect = bProtSize;
+
+                // #i77187# see above
+                MarkListHasChanged();
+            }
+        }
+    }
+
+    EndUndo();
+}
+
+
+bool SdrEditView::IsAlignPossible() const
+{  // at least two selected objects, at least one of them movable
+    ForcePossibilities();
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount==0) return false;         // nothing selected!
+    if (nCount==1) return m_bMoveAllowed;  // align single object to page
+    return m_bOneOrMoreMovable;          // otherwise: MarkCount>=2
+}
+
+void SdrEditView::AlignMarkedObjects(SdrHorAlign eHor, SdrVertAlign eVert)
+{
+    if (eHor==SdrHorAlign::NONE && eVert==SdrVertAlign::NONE)
+        return;
+
+    SortMarkedObjects();
+    if (!GetMarkedObjectCount())
+        return;
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditAllViews();
+        OUString aStr(GetDescriptionOfMarkedObjects());
+        if (eHor==SdrHorAlign::NONE)
+        {
+            switch (eVert)
+            {
+                case SdrVertAlign::Top:
+                    aStr = ImpGetDescriptionString(STR_EditAlignVTop);
+                    break;
+                case SdrVertAlign::Bottom:
+                    aStr = ImpGetDescriptionString(STR_EditAlignVBottom);
+                    break;
+                case SdrVertAlign::Center:
+                    aStr = ImpGetDescriptionString(STR_EditAlignVCenter);
+                    break;
+                default: break;
+            }
+        }
+        else if (eVert==SdrVertAlign::NONE)
+        {
+            switch (eHor)
+            {
+                case SdrHorAlign::Left:
+                    aStr = ImpGetDescriptionString(STR_EditAlignHLeft);
+                    break;
+                case SdrHorAlign::Right:
+                    aStr = ImpGetDescriptionString(STR_EditAlignHRight);
+                    break;
+                case SdrHorAlign::Center:
+                    aStr = ImpGetDescriptionString(STR_EditAlignHCenter);
+                    break;
+                default: break;
+            }
+        }
+        else if (eHor==SdrHorAlign::Center && eVert==SdrVertAlign::Center)
+        {
+            aStr = ImpGetDescriptionString(STR_EditAlignCenter);
+        }
+        else
+        {
+            aStr = ImpGetDescriptionString(STR_EditAlign);
+        }
+        BegUndo(aStr);
+    }
+
+    tools::Rectangle aBound;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    bool bHasFixed=false;
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrObjTransformInfoRec aInfo;
+        pObj->TakeObjInfo(aInfo);
+        if (!aInfo.bMoveAllowed || pObj->IsMoveProtect())
+        {
+            tools::Rectangle aObjRect(pObj->GetSnapRect());
+            aBound.Union(aObjRect);
+            bHasFixed=true;
+        }
+    }
+    if (!bHasFixed)
+    {
+        if (nMarkCount==1)
+        {   // align single object to page
+            const SdrObject* pObj=GetMarkedObjectByIndex(0);
+            const SdrPage* pPage=pObj->getSdrPageFromSdrObject();
+            const SdrPageGridFrameList* pGFL=pPage->GetGridFrameList(GetSdrPageViewOfMarkedByIndex(0),&(pObj->GetSnapRect()));
+            const SdrPageGridFrame* pFrame=nullptr;
+            if (pGFL!=nullptr && pGFL->GetCount()!=0)
+            { // Writer
+                pFrame=&((*pGFL)[0]);
+            }
+
+            if (pFrame!=nullptr)
+            { // Writer
+                aBound=pFrame->GetUserArea();
+            }
+            else
+            {
+                aBound=tools::Rectangle(pPage->GetLeftBorder(),pPage->GetUpperBorder(),
+                                 pPage->GetWidth()-pPage->GetRightBorder(),
+                                 pPage->GetHeight()-pPage->GetLowerBorder());
+            }
+        }
+        else
+        {
+            aBound=GetMarkedObjRect();
+        }
+    }
+    Point aCenter(aBound.Center());
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrObjTransformInfoRec aInfo;
+        pObj->TakeObjInfo(aInfo);
+        if (aInfo.bMoveAllowed && !pObj->IsMoveProtect())
+        {
+            long nXMov=0;
+            long nYMov=0;
+            tools::Rectangle aObjRect(pObj->GetSnapRect());
+            switch (eVert)
+            {
+                case SdrVertAlign::Top   : nYMov=aBound.Top()   -aObjRect.Top()       ; break;
+                case SdrVertAlign::Bottom: nYMov=aBound.Bottom()-aObjRect.Bottom()    ; break;
+                case SdrVertAlign::Center: nYMov=aCenter.Y()    -aObjRect.Center().Y(); break;
+                default: break;
+            }
+            switch (eHor)
+            {
+                case SdrHorAlign::Left  : nXMov=aBound.Left()  -aObjRect.Left()      ; break;
+                case SdrHorAlign::Right : nXMov=aBound.Right() -aObjRect.Right()     ; break;
+                case SdrHorAlign::Center: nXMov=aCenter.X()    -aObjRect.Center().X(); break;
+                default: break;
+            }
+            if (nXMov!=0 || nYMov!=0)
+            {
+                // SdrEdgeObj needs an extra SdrUndoGeoObj since the
+                // connections may need to be saved
+                if( bUndo )
+                {
+                    if( dynamic_cast<SdrEdgeObj*>(pObj) )
+                    {
+                        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+                    }
+
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoMoveObject(*pObj,Size(nXMov,nYMov)));
+                }
+
+                pObj->Move(Size(nXMov,nYMov));
+            }
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdedtv2.cxx b/svx/source/svdraw/svdedtv2.cxx
new file mode 100644
index 000000000..de8c521b3
--- /dev/null
+++ b/svx/source/svdraw/svdedtv2.cxx
@@ -0,0 +1,2198 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdedtv.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svditer.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdoole2.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/sdooitm.hxx>
+#include <svx/sdshitm.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xtextit0.hxx>
+#include "svdfmtf.hxx"
+#include <svdpdf.hxx>
+#include <svx/svdetc.hxx>
+#include <editeng/outlobj.hxx>
+#include <editeng/eeitem.hxx>
+#include <basegfx/polygon/b2dpolypolygon.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <svx/svxdlg.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdoashp.hxx>
+#include <basegfx/polygon/b2dpolypolygoncutter.hxx>
+#include <i18nutil/unicode.hxx>
+#include <sal/log.hxx>
+#include <tools/debug.hxx>
+#include <memory>
+#include <vector>
+#include <vcl/graph.hxx>
+
+using namespace com::sun::star;
+
+SdrObject* SdrEditView::GetMaxToTopObj(SdrObject* /*pObj*/) const
+{
+  return nullptr;
+}
+
+SdrObject* SdrEditView::GetMaxToBtmObj(SdrObject* /*pObj*/) const
+{
+  return nullptr;
+}
+
+void SdrEditView::ObjOrderChanged(SdrObject* /*pObj*/, size_t /*nOldPos*/, size_t /*nNewPos*/)
+{
+}
+
+void SdrEditView::MovMarkedToTop()
+{
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount!=0)
+    {
+        const bool bUndo = IsUndoEnabled();
+
+        if( bUndo )
+            BegUndo(SvxResId(STR_EditMovToTop),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::MoveToTop);
+
+        SortMarkedObjects();
+        for (size_t nm=0; nm<nCount; ++nm)
+        { // All Ordnums have to be correct!
+            GetMarkedObjectByIndex(nm)->GetOrdNum();
+        }
+        bool bChg=false;
+        SdrObjList* pOL0=nullptr;
+        size_t nNewPos=0;
+        for (size_t nm=nCount; nm>0;)
+        {
+            --nm;
+            SdrMark* pM=GetSdrMarkByIndex(nm);
+            SdrObject* pObj=pM->GetMarkedSdrObj();
+            SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+            if (pOL!=pOL0)
+            {
+                nNewPos = pOL->GetObjCount()-1;
+                pOL0=pOL;
+            }
+            const size_t nNowPos = pObj->GetOrdNumDirect();
+            const tools::Rectangle& rBR=pObj->GetCurrentBoundRect();
+            size_t nCmpPos = nNowPos+1;
+            SdrObject* pMaxObj=GetMaxToTopObj(pObj);
+            if (pMaxObj!=nullptr)
+            {
+                size_t nMaxPos=pMaxObj->GetOrdNum();
+                if (nMaxPos!=0)
+                    nMaxPos--;
+                if (nNewPos>nMaxPos)
+                    nNewPos=nMaxPos; // neither go faster...
+                if (nNewPos<nNowPos)
+                    nNewPos=nNowPos; // nor go in the other direction
+            }
+            bool bEnd=false;
+            while (nCmpPos<nNewPos && !bEnd)
+            {
+                SdrObject* pCmpObj=pOL->GetObj(nCmpPos);
+                if (pCmpObj==nullptr)
+                {
+                    OSL_FAIL("MovMarkedToTop(): Reference object not found.");
+                    bEnd=true;
+                }
+                else if (pCmpObj==pMaxObj)
+                {
+                    nNewPos=nCmpPos;
+                    nNewPos--;
+                    bEnd=true;
+                }
+                else if (rBR.IsOver(pCmpObj->GetCurrentBoundRect()))
+                {
+                    nNewPos=nCmpPos;
+                    bEnd=true;
+                }
+                else
+                {
+                    nCmpPos++;
+                }
+            }
+            if (nNowPos!=nNewPos)
+            {
+                bChg=true;
+                pOL->SetObjectOrdNum(nNowPos,nNewPos);
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
+                ObjOrderChanged(pObj,nNowPos,nNewPos);
+            }
+            nNewPos--;
+        }
+
+        if( bUndo )
+            EndUndo();
+
+        if (bChg)
+            MarkListHasChanged();
+    }
+}
+
+void SdrEditView::MovMarkedToBtm()
+{
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount!=0)
+    {
+        const bool bUndo = IsUndoEnabled();
+
+        if( bUndo )
+            BegUndo(SvxResId(STR_EditMovToBtm),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::MoveToBottom);
+
+        SortMarkedObjects();
+        for (size_t nm=0; nm<nCount; ++nm)
+        { // All Ordnums have to be correct!
+            GetMarkedObjectByIndex(nm)->GetOrdNum();
+        }
+
+        bool bChg=false;
+        SdrObjList* pOL0=nullptr;
+        size_t nNewPos=0;
+        for (size_t nm=0; nm<nCount; ++nm)
+        {
+            SdrMark* pM=GetSdrMarkByIndex(nm);
+            SdrObject* pObj=pM->GetMarkedSdrObj();
+            SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+            if (pOL!=pOL0)
+            {
+                nNewPos=0;
+                pOL0=pOL;
+            }
+            const size_t nNowPos = pObj->GetOrdNumDirect();
+            const tools::Rectangle& rBR=pObj->GetCurrentBoundRect();
+            size_t nCmpPos = nNowPos;
+            if (nCmpPos>0)
+                --nCmpPos;
+            SdrObject* pMaxObj=GetMaxToBtmObj(pObj);
+            if (pMaxObj!=nullptr)
+            {
+                const size_t nMinPos=pMaxObj->GetOrdNum()+1;
+                if (nNewPos<nMinPos)
+                    nNewPos=nMinPos; // neither go faster...
+                if (nNewPos>nNowPos)
+                    nNewPos=nNowPos; // nor go in the other direction
+            }
+            bool bEnd=false;
+            // nNewPos in this case is the "maximum" position
+            // the object may reach without going faster than the object before
+            // it (multiple selection).
+            while (nCmpPos>nNewPos && !bEnd)
+            {
+                SdrObject* pCmpObj=pOL->GetObj(nCmpPos);
+                if (pCmpObj==nullptr)
+                {
+                    OSL_FAIL("MovMarkedToBtm(): Reference object not found.");
+                    bEnd=true;
+                }
+                else if (pCmpObj==pMaxObj)
+                {
+                    nNewPos=nCmpPos;
+                    nNewPos++;
+                    bEnd=true;
+                }
+                else if (rBR.IsOver(pCmpObj->GetCurrentBoundRect()))
+                {
+                    nNewPos=nCmpPos;
+                    bEnd=true;
+                }
+                else
+                {
+                    nCmpPos--;
+                }
+            }
+            if (nNowPos!=nNewPos)
+            {
+                bChg=true;
+                pOL->SetObjectOrdNum(nNowPos,nNewPos);
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
+                ObjOrderChanged(pObj,nNowPos,nNewPos);
+            }
+            nNewPos++;
+        }
+
+        if(bUndo)
+            EndUndo();
+
+        if(bChg)
+            MarkListHasChanged();
+    }
+}
+
+void SdrEditView::PutMarkedToTop()
+{
+    PutMarkedInFrontOfObj(nullptr);
+}
+
+void SdrEditView::PutMarkedInFrontOfObj(const SdrObject* pRefObj)
+{
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount==0)
+        return;
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+        BegUndo(SvxResId(STR_EditPutToTop),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::PutToTop);
+
+    SortMarkedObjects();
+
+    if (pRefObj!=nullptr)
+    {
+        // Make "in front of the object" work, even if the
+        // selected objects are already in front of the other object
+        const size_t nRefMark=TryToFindMarkedObject(pRefObj);
+        SdrMark aRefMark;
+        if (nRefMark!=SAL_MAX_SIZE)
+        {
+            aRefMark=*GetSdrMarkByIndex(nRefMark);
+            GetMarkedObjectListWriteAccess().DeleteMark(nRefMark);
+        }
+        PutMarkedToBtm();
+        if (nRefMark!=SAL_MAX_SIZE)
+        {
+            GetMarkedObjectListWriteAccess().InsertEntry(aRefMark);
+            SortMarkedObjects();
+        }
+    }
+    for (size_t nm=0; nm<nCount; ++nm)
+    { // All Ordnums have to be correct!
+        GetMarkedObjectByIndex(nm)->GetOrdNum();
+    }
+    bool bChg=false;
+    SdrObjList* pOL0=nullptr;
+    size_t nNewPos=0;
+    for (size_t nm=nCount; nm>0;)
+    {
+        --nm;
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        if (pObj!=pRefObj)
+        {
+            SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+            if (pOL!=pOL0)
+            {
+                nNewPos=pOL->GetObjCount()-1;
+                pOL0=pOL;
+            }
+            const size_t nNowPos=pObj->GetOrdNumDirect();
+            SdrObject* pMaxObj=GetMaxToTopObj(pObj);
+            if (pMaxObj!=nullptr)
+            {
+                size_t nMaxOrd=pMaxObj->GetOrdNum(); // sadly doesn't work any other way
+                if (nMaxOrd>0)
+                    nMaxOrd--;
+                if (nNewPos>nMaxOrd)
+                    nNewPos=nMaxOrd; // neither go faster...
+                if (nNewPos<nNowPos)
+                    nNewPos=nNowPos; // nor go into the other direction
+            }
+            if (pRefObj!=nullptr)
+            {
+                if (pRefObj->getParentSdrObjListFromSdrObject()==pObj->getParentSdrObjListFromSdrObject())
+                {
+                    const size_t nMaxOrd=pRefObj->GetOrdNum(); // sadly doesn't work any other way
+                    if (nNewPos>nMaxOrd)
+                        nNewPos=nMaxOrd; // neither go faster...
+                    if (nNewPos<nNowPos)
+                        nNewPos=nNowPos; // nor go into the other direction
+                }
+                else
+                {
+                    nNewPos=nNowPos; // different PageView, so don't change
+                }
+            }
+            if (nNowPos!=nNewPos)
+            {
+                bChg=true;
+                pOL->SetObjectOrdNum(nNowPos,nNewPos);
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
+                ObjOrderChanged(pObj,nNowPos,nNewPos);
+            }
+            nNewPos--;
+        } // if (pObj!=pRefObj)
+    } // for loop over all selected objects
+
+    if( bUndo )
+        EndUndo();
+
+    if(bChg)
+        MarkListHasChanged();
+}
+
+void SdrEditView::PutMarkedToBtm()
+{
+    PutMarkedBehindObj(nullptr);
+}
+
+void SdrEditView::PutMarkedBehindObj(const SdrObject* pRefObj)
+{
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount==0)
+        return;
+
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+        BegUndo(SvxResId(STR_EditPutToBtm),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::PutToBottom);
+
+    SortMarkedObjects();
+    if (pRefObj!=nullptr)
+    {
+        // Make "behind the object" work, even if the
+        // selected objects are already behind the other object
+        const size_t nRefMark=TryToFindMarkedObject(pRefObj);
+        SdrMark aRefMark;
+        if (nRefMark!=SAL_MAX_SIZE)
+        {
+            aRefMark=*GetSdrMarkByIndex(nRefMark);
+            GetMarkedObjectListWriteAccess().DeleteMark(nRefMark);
+        }
+        PutMarkedToTop();
+        if (nRefMark!=SAL_MAX_SIZE)
+        {
+            GetMarkedObjectListWriteAccess().InsertEntry(aRefMark);
+            SortMarkedObjects();
+        }
+    }
+    for (size_t nm=0; nm<nCount; ++nm) { // All Ordnums have to be correct!
+        GetMarkedObjectByIndex(nm)->GetOrdNum();
+    }
+    bool bChg=false;
+    SdrObjList* pOL0=nullptr;
+    size_t nNewPos=0;
+    for (size_t nm=0; nm<nCount; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        if (pObj!=pRefObj) {
+            SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+            if (pOL!=pOL0) {
+                nNewPos=0;
+                pOL0=pOL;
+            }
+            const size_t nNowPos=pObj->GetOrdNumDirect();
+            SdrObject* pMinObj=GetMaxToBtmObj(pObj);
+            if (pMinObj!=nullptr) {
+                const size_t nMinOrd=pMinObj->GetOrdNum()+1; // sadly doesn't work any differently
+                if (nNewPos<nMinOrd) nNewPos=nMinOrd; // neither go faster...
+                if (nNewPos>nNowPos) nNewPos=nNowPos; // nor go into the other direction
+            }
+            if (pRefObj!=nullptr) {
+                if (pRefObj->getParentSdrObjListFromSdrObject()==pObj->getParentSdrObjListFromSdrObject()) {
+                    const size_t nMinOrd=pRefObj->GetOrdNum(); // sadly doesn't work any differently
+                    if (nNewPos<nMinOrd) nNewPos=nMinOrd; // neither go faster...
+                    if (nNewPos>nNowPos) nNewPos=nNowPos; // nor go into the other direction
+                } else {
+                    nNewPos=nNowPos; // different PageView, so don't change
+                }
+            }
+            if (nNowPos!=nNewPos) {
+                bChg=true;
+                pOL->SetObjectOrdNum(nNowPos,nNewPos);
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos));
+                ObjOrderChanged(pObj,nNowPos,nNewPos);
+            }
+            nNewPos++;
+        } // if (pObj!=pRefObj)
+    } // for loop over all selected objects
+
+    if(bUndo)
+        EndUndo();
+
+    if(bChg)
+        MarkListHasChanged();
+
+}
+
+void SdrEditView::ReverseOrderOfMarked()
+{
+    SortMarkedObjects();
+    const size_t nMarkCount=GetMarkedObjectCount();
+    if (nMarkCount>0)
+    {
+        bool bChg=false;
+
+        bool bUndo = IsUndoEnabled();
+        if( bUndo )
+            BegUndo(SvxResId(STR_EditRevOrder),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ReverseOrder);
+
+        size_t a=0;
+        do {
+            // take into account selection across multiple PageViews
+            size_t b=a+1;
+            while (b<nMarkCount && GetSdrPageViewOfMarkedByIndex(b) == GetSdrPageViewOfMarkedByIndex(a)) ++b;
+            --b;
+            SdrObjList* pOL=GetSdrPageViewOfMarkedByIndex(a)->GetObjList();
+            size_t c=b;
+            if (a<c) { // make sure OrdNums aren't dirty
+                GetMarkedObjectByIndex(a)->GetOrdNum();
+            }
+            while (a<c) {
+                SdrObject* pObj1=GetMarkedObjectByIndex(a);
+                SdrObject* pObj2=GetMarkedObjectByIndex(c);
+                const size_t nOrd1=pObj1->GetOrdNumDirect();
+                const size_t nOrd2=pObj2->GetOrdNumDirect();
+                if( bUndo )
+                {
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj1,nOrd1,nOrd2));
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj2,nOrd2-1,nOrd1));
+                }
+                pOL->SetObjectOrdNum(nOrd1,nOrd2);
+                // Obj 2 has moved forward by one position, so now nOrd2-1
+                pOL->SetObjectOrdNum(nOrd2-1,nOrd1);
+                // use Replace instead of SetOrdNum for performance reasons (recalculation of Ordnums)
+                ++a;
+                --c;
+                bChg=true;
+            }
+            a=b+1;
+        } while (a<nMarkCount);
+
+        if(bUndo)
+            EndUndo();
+
+        if(bChg)
+            MarkListHasChanged();
+    }
+}
+
+void SdrEditView::ImpCheckToTopBtmPossible()
+{
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount==0)
+        return;
+    if (nCount==1)
+    { // special-casing for single selection
+        SdrObject* pObj=GetMarkedObjectByIndex(0);
+        SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+        SAL_WARN_IF(!pOL, "svx", "Object somehow has no ObjList");
+        size_t nMax = pOL ? pOL->GetObjCount() : 0;
+        size_t nMin = 0;
+        const size_t nObjNum=pObj->GetOrdNum();
+        SdrObject* pRestrict=GetMaxToTopObj(pObj);
+        if (pRestrict!=nullptr) {
+            const size_t nRestrict=pRestrict->GetOrdNum();
+            if (nRestrict<nMax) nMax=nRestrict;
+        }
+        pRestrict=GetMaxToBtmObj(pObj);
+        if (pRestrict!=nullptr) {
+            const size_t nRestrict=pRestrict->GetOrdNum();
+            if (nRestrict>nMin) nMin=nRestrict;
+        }
+        m_bToTopPossible=nObjNum<nMax-1;
+        m_bToBtmPossible=nObjNum>nMin;
+    } else { // multiple selection
+        SdrObjList* pOL0=nullptr;
+        size_t nPos0 = 0;
+        for (size_t nm = 0; !m_bToBtmPossible && nm<nCount; ++nm) { // check 'send to background'
+            SdrObject* pObj=GetMarkedObjectByIndex(nm);
+            SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+            if (pOL!=pOL0) {
+                nPos0 = 0;
+                pOL0=pOL;
+            }
+            const size_t nPos = pObj->GetOrdNum();
+            m_bToBtmPossible = nPos && (nPos-1 > nPos0);
+            nPos0 = nPos;
+        }
+
+        pOL0=nullptr;
+        nPos0 = SAL_MAX_SIZE;
+        for (size_t nm=nCount; !m_bToTopPossible && nm>0; ) { // check 'bring to front'
+            --nm;
+            SdrObject* pObj=GetMarkedObjectByIndex(nm);
+            SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+            if (pOL!=pOL0) {
+                nPos0=pOL->GetObjCount();
+                pOL0=pOL;
+            }
+            const size_t nPos = pObj->GetOrdNum();
+            m_bToTopPossible = nPos+1 < nPos0;
+            nPos0=nPos;
+        }
+    }
+}
+
+
+// Combine
+
+
+void SdrEditView::ImpCopyAttributes(const SdrObject* pSource, SdrObject* pDest) const
+{
+    if (pSource!=nullptr) {
+        SdrObjList* pOL=pSource->GetSubList();
+        if (pOL!=nullptr && !pSource->Is3DObj()) { // get first non-group object from group
+            SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
+            pSource=aIter.Next();
+        }
+    }
+
+    if(pSource && pDest)
+    {
+        SfxItemSet aSet(mpModel->GetItemPool(),
+            svl::Items<SDRATTR_START,              SDRATTR_NOTPERSIST_FIRST-1,
+            SDRATTR_NOTPERSIST_LAST+1,  SDRATTR_END,
+            EE_ITEMS_START,             EE_ITEMS_END>{});
+
+        aSet.Put(pSource->GetMergedItemSet());
+
+        pDest->ClearMergedItem();
+        pDest->SetMergedItemSet(aSet);
+
+        pDest->NbcSetLayer(pSource->GetLayer());
+        pDest->NbcSetStyleSheet(pSource->GetStyleSheet(), true);
+    }
+}
+
+bool SdrEditView::ImpCanConvertForCombine1(const SdrObject* pObj)
+{
+    // new condition IsLine() to be able to combine simple Lines
+    bool bIsLine(false);
+
+    const SdrPathObj* pPath = dynamic_cast< const SdrPathObj*>( pObj );
+
+    if(pPath)
+    {
+        bIsLine = pPath->IsLine();
+    }
+
+    SdrObjTransformInfoRec aInfo;
+    pObj->TakeObjInfo(aInfo);
+
+    return (aInfo.bCanConvToPath || aInfo.bCanConvToPoly || bIsLine);
+}
+
+bool SdrEditView::ImpCanConvertForCombine(const SdrObject* pObj)
+{
+    SdrObjList* pOL = pObj->GetSubList();
+
+    if(pOL && !pObj->Is3DObj())
+    {
+        SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
+
+        while(aIter.IsMore())
+        {
+            SdrObject* pObj1 = aIter.Next();
+
+            // all members of a group have to be convertible
+            if(!ImpCanConvertForCombine1(pObj1))
+            {
+                return false;
+            }
+        }
+    }
+    else
+    {
+        if(!ImpCanConvertForCombine1(pObj))
+        {
+            return false;
+        }
+    }
+
+    return true;
+}
+
+basegfx::B2DPolyPolygon SdrEditView::ImpGetPolyPolygon1(const SdrObject* pObj)
+{
+    basegfx::B2DPolyPolygon aRetval;
+    const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>( pObj );
+
+    if(pPath && !pObj->GetOutlinerParaObject())
+    {
+        aRetval = pPath->GetPathPoly();
+    }
+    else
+    {
+        SdrObjectUniquePtr pConvObj = pObj->ConvertToPolyObj(true/*bCombine*/, false);
+
+        if(pConvObj)
+        {
+            SdrObjList* pOL = pConvObj->GetSubList();
+
+            if(pOL)
+            {
+                SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
+
+                while(aIter.IsMore())
+                {
+                    SdrObject* pObj1 = aIter.Next();
+                    pPath = dynamic_cast<SdrPathObj*>( pObj1 );
+
+                    if(pPath)
+                    {
+                        aRetval.append(pPath->GetPathPoly());
+                    }
+                }
+            }
+            else
+            {
+                pPath = dynamic_cast<SdrPathObj*>( pConvObj.get() );
+
+                if(pPath)
+                {
+                    aRetval = pPath->GetPathPoly();
+                }
+            }
+        }
+    }
+
+    return aRetval;
+}
+
+basegfx::B2DPolyPolygon SdrEditView::ImpGetPolyPolygon(const SdrObject* pObj)
+{
+    SdrObjList* pOL = pObj->GetSubList();
+
+    if(pOL && !pObj->Is3DObj())
+    {
+        basegfx::B2DPolyPolygon aRetval;
+        SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
+
+        while(aIter.IsMore())
+        {
+            SdrObject* pObj1 = aIter.Next();
+            aRetval.append(ImpGetPolyPolygon1(pObj1));
+        }
+
+        return aRetval;
+    }
+    else
+    {
+        return ImpGetPolyPolygon1(pObj);
+    }
+}
+
+basegfx::B2DPolygon SdrEditView::ImpCombineToSinglePolygon(const basegfx::B2DPolyPolygon& rPolyPolygon)
+{
+    const sal_uInt32 nPolyCount(rPolyPolygon.count());
+
+    if(0 == nPolyCount)
+    {
+        return basegfx::B2DPolygon();
+    }
+    else if(1 == nPolyCount)
+    {
+        return rPolyPolygon.getB2DPolygon(0);
+    }
+    else
+    {
+        basegfx::B2DPolygon aRetval(rPolyPolygon.getB2DPolygon(0));
+
+        for(sal_uInt32 a(1); a < nPolyCount; a++)
+        {
+            basegfx::B2DPolygon aCandidate(rPolyPolygon.getB2DPolygon(a));
+
+            if(aRetval.count())
+            {
+                if(aCandidate.count())
+                {
+                    const basegfx::B2DPoint aCA(aCandidate.getB2DPoint(0));
+                    const basegfx::B2DPoint aCB(aCandidate.getB2DPoint(aCandidate.count() - 1));
+                    const basegfx::B2DPoint aRA(aRetval.getB2DPoint(0));
+                    const basegfx::B2DPoint aRB(aRetval.getB2DPoint(aRetval.count() - 1));
+
+                    const double fRACA(basegfx::B2DVector(aCA - aRA).getLength());
+                    const double fRACB(basegfx::B2DVector(aCB - aRA).getLength());
+                    const double fRBCA(basegfx::B2DVector(aCA - aRB).getLength());
+                    const double fRBCB(basegfx::B2DVector(aCB - aRB).getLength());
+
+                    const double fSmallestRA(std::min(fRACA, fRACB));
+                    const double fSmallestRB(std::min(fRBCA, fRBCB));
+
+                    if(fSmallestRA < fSmallestRB)
+                    {
+                        // flip result
+                        aRetval.flip();
+                    }
+
+                    const double fSmallestCA(std::min(fRACA, fRBCA));
+                    const double fSmallestCB(std::min(fRACB, fRBCB));
+
+                    if(fSmallestCB < fSmallestCA)
+                    {
+                        // flip candidate
+                        aCandidate.flip();
+                    }
+
+                    // append candidate to retval
+                    aRetval.append(aCandidate);
+                }
+            }
+            else
+            {
+                aRetval = aCandidate;
+            }
+        }
+
+        return aRetval;
+    }
+}
+
+namespace {
+
+// for distribution dialog function
+struct ImpDistributeEntry
+{
+    SdrObject*                  mpObj;
+    sal_Int32                       mnPos;
+    sal_Int32                       mnLength;
+};
+
+}
+
+typedef std::vector<ImpDistributeEntry> ImpDistributeEntryList;
+
+void SdrEditView::DistributeMarkedObjects(weld::Window* pParent)
+{
+    const size_t nMark(GetMarkedObjectCount());
+
+    if(nMark > 2)
+    {
+        SfxItemSet aNewAttr(mpModel->GetItemPool());
+
+        SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
+        ScopedVclPtr<AbstractSvxDistributeDialog> pDlg(pFact->CreateSvxDistributeDialog(pParent, aNewAttr));
+
+        sal_uInt16 nResult = pDlg->Execute();
+
+        if(nResult == RET_OK)
+        {
+            SvxDistributeHorizontal eHor = pDlg->GetDistributeHor();
+            SvxDistributeVertical eVer = pDlg->GetDistributeVer();
+            ImpDistributeEntryList aEntryList;
+            ImpDistributeEntryList::iterator itEntryList;
+            sal_uInt32 nFullLength;
+
+            const bool bUndo = IsUndoEnabled();
+            if( bUndo )
+                BegUndo();
+
+            if(eHor != SvxDistributeHorizontal::NONE)
+            {
+                // build sorted entry list
+                nFullLength = 0;
+
+                for( size_t a = 0; a < nMark; ++a )
+                {
+                    SdrMark* pMark = GetSdrMarkByIndex(a);
+                    ImpDistributeEntry aNew;
+
+                    aNew.mpObj = pMark->GetMarkedSdrObj();
+
+                    switch(eHor)
+                    {
+                        case SvxDistributeHorizontal::Left:
+                        {
+                            aNew.mnPos = aNew.mpObj->GetSnapRect().Left();
+                            break;
+                        }
+                        case SvxDistributeHorizontal::Center:
+                        {
+                            aNew.mnPos = (aNew.mpObj->GetSnapRect().Right() + aNew.mpObj->GetSnapRect().Left()) / 2;
+                            break;
+                        }
+                        case SvxDistributeHorizontal::Distance:
+                        {
+                            aNew.mnLength = aNew.mpObj->GetSnapRect().GetWidth() + 1;
+                            nFullLength += aNew.mnLength;
+                            aNew.mnPos = (aNew.mpObj->GetSnapRect().Right() + aNew.mpObj->GetSnapRect().Left()) / 2;
+                            break;
+                        }
+                        case SvxDistributeHorizontal::Right:
+                        {
+                            aNew.mnPos = aNew.mpObj->GetSnapRect().Right();
+                            break;
+                        }
+                        default: break;
+                    }
+
+                    itEntryList = std::find_if(aEntryList.begin(), aEntryList.end(),
+                        [&aNew](const ImpDistributeEntry& rEntry) { return rEntry.mnPos >= aNew.mnPos; });
+                    if ( itEntryList < aEntryList.end() )
+                        aEntryList.insert( itEntryList, aNew );
+                    else
+                        aEntryList.push_back( aNew );
+                }
+
+                if(eHor == SvxDistributeHorizontal::Distance)
+                {
+                    // calculate room in-between
+                    sal_Int32 nWidth = GetAllMarkedBoundRect().GetWidth() + 1;
+                    double fStepWidth = (static_cast<double>(nWidth) - static_cast<double>(nFullLength)) / static_cast<double>(aEntryList.size() - 1);
+                    double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
+                    fStepStart += fStepWidth + static_cast<double>((aEntryList[ 0 ].mnLength + aEntryList[ 1 ].mnLength) / 2);
+
+                    // move entries 1..n-1
+                    for( size_t i = 1, n = aEntryList.size()-1; i < n; ++i )
+                    {
+                        ImpDistributeEntry& rCurr = aEntryList[ i    ];
+                        ImpDistributeEntry& rNext = aEntryList[ i + 1];
+                        sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
+                        if( bUndo )
+                            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
+                        rCurr.mpObj->Move(Size(nDelta, 0));
+                        fStepStart += fStepWidth + static_cast<double>((rCurr.mnLength + rNext.mnLength) / 2);
+                    }
+                }
+                else
+                {
+                    // calculate distances
+                    sal_Int32 nWidth = aEntryList[ aEntryList.size() - 1 ].mnPos - aEntryList[ 0 ].mnPos;
+                    double fStepWidth = static_cast<double>(nWidth) / static_cast<double>(aEntryList.size() - 1);
+                    double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
+                    fStepStart += fStepWidth;
+
+                    // move entries 1..n-1
+                    for( size_t i = 1 ; i < aEntryList.size()-1 ; ++i )
+                    {
+                        ImpDistributeEntry& rCurr = aEntryList[ i ];
+                        sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
+                        if( bUndo )
+                            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
+                        rCurr.mpObj->Move(Size(nDelta, 0));
+                        fStepStart += fStepWidth;
+                    }
+                }
+
+                // clear list
+                aEntryList.clear();
+            }
+
+            if(eVer != SvxDistributeVertical::NONE)
+            {
+                // build sorted entry list
+                nFullLength = 0;
+
+                for( size_t a = 0; a < nMark; ++a )
+                {
+                    SdrMark* pMark = GetSdrMarkByIndex(a);
+                    ImpDistributeEntry aNew;
+
+                    aNew.mpObj = pMark->GetMarkedSdrObj();
+
+                    switch(eVer)
+                    {
+                        case SvxDistributeVertical::Top:
+                        {
+                            aNew.mnPos = aNew.mpObj->GetSnapRect().Top();
+                            break;
+                        }
+                        case SvxDistributeVertical::Center:
+                        {
+                            aNew.mnPos = (aNew.mpObj->GetSnapRect().Bottom() + aNew.mpObj->GetSnapRect().Top()) / 2;
+                            break;
+                        }
+                        case SvxDistributeVertical::Distance:
+                        {
+                            aNew.mnLength = aNew.mpObj->GetSnapRect().GetHeight() + 1;
+                            nFullLength += aNew.mnLength;
+                            aNew.mnPos = (aNew.mpObj->GetSnapRect().Bottom() + aNew.mpObj->GetSnapRect().Top()) / 2;
+                            break;
+                        }
+                        case SvxDistributeVertical::Bottom:
+                        {
+                            aNew.mnPos = aNew.mpObj->GetSnapRect().Bottom();
+                            break;
+                        }
+                        default: break;
+                    }
+
+                    itEntryList = std::find_if(aEntryList.begin(), aEntryList.end(),
+                        [&aNew](const ImpDistributeEntry& rEntry) { return rEntry.mnPos >= aNew.mnPos; });
+                    if ( itEntryList < aEntryList.end() )
+                        aEntryList.insert( itEntryList, aNew );
+                    else
+                        aEntryList.push_back( aNew );
+                }
+
+                if(eVer == SvxDistributeVertical::Distance)
+                {
+                    // calculate room in-between
+                    sal_Int32 nHeight = GetAllMarkedBoundRect().GetHeight() + 1;
+                    double fStepWidth = (static_cast<double>(nHeight) - static_cast<double>(nFullLength)) / static_cast<double>(aEntryList.size() - 1);
+                    double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
+                    fStepStart += fStepWidth + static_cast<double>((aEntryList[ 0 ].mnLength + aEntryList[ 1 ].mnLength) / 2);
+
+                    // move entries 1..n-1
+                    for( size_t i = 1, n = aEntryList.size()-1; i < n; ++i)
+                    {
+                        ImpDistributeEntry& rCurr = aEntryList[ i     ];
+                        ImpDistributeEntry& rNext = aEntryList[ i + 1 ];
+                        sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
+                        if( bUndo )
+                            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
+                        rCurr.mpObj->Move(Size(0, nDelta));
+                        fStepStart += fStepWidth + static_cast<double>((rCurr.mnLength + rNext.mnLength) / 2);
+                    }
+                }
+                else
+                {
+                    // calculate distances
+                    sal_Int32 nHeight = aEntryList[ aEntryList.size() - 1 ].mnPos - aEntryList[ 0 ].mnPos;
+                    double fStepWidth = static_cast<double>(nHeight) / static_cast<double>(aEntryList.size() - 1);
+                    double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos);
+                    fStepStart += fStepWidth;
+
+                    // move entries 1..n-1
+                    for(size_t i = 1, n = aEntryList.size()-1; i < n; ++i)
+                    {
+                        ImpDistributeEntry& rCurr = aEntryList[ i ];
+                        sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos;
+                        if( bUndo )
+                            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj));
+                        rCurr.mpObj->Move(Size(0, nDelta));
+                        fStepStart += fStepWidth;
+                    }
+                }
+
+                // clear list
+                aEntryList.clear();
+            }
+
+            // UNDO-Comment and end of UNDO
+            mpModel->SetUndoComment(SvxResId(STR_DistributeMarkedObjects));
+
+            if( bUndo )
+                EndUndo();
+        }
+    }
+}
+
+void SdrEditView::MergeMarkedObjects(SdrMergeMode eMode)
+{
+    // #i73441# check content
+    if(!AreObjectsMarked())
+        return;
+
+    SdrMarkList aRemove;
+    SortMarkedObjects();
+
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+        BegUndo();
+
+    size_t nInsPos = SAL_MAX_SIZE;
+    const SdrObject* pAttrObj = nullptr;
+    basegfx::B2DPolyPolygon aMergePolyPolygonA;
+    basegfx::B2DPolyPolygon aMergePolyPolygonB;
+
+    SdrObjList* pInsOL = nullptr;
+    SdrPageView* pInsPV = nullptr;
+    bool bFirstObjectComplete(false);
+
+    // make sure selected objects are contour objects
+    // since now basegfx::utils::adaptiveSubdivide() is used, it is no longer
+    // necessary to use ConvertMarkedToPolyObj which will subdivide curves using the old
+    // mechanisms. In a next step the polygon clipper will even be able to clip curves...
+    // ConvertMarkedToPolyObj(true);
+    ConvertMarkedToPathObj(true);
+    OSL_ENSURE(AreObjectsMarked(), "no more objects selected after preparations (!)");
+
+    for(size_t a=0; a<GetMarkedObjectCount(); ++a)
+    {
+        SdrMark* pM = GetSdrMarkByIndex(a);
+        SdrObject* pObj = pM->GetMarkedSdrObj();
+
+        if(ImpCanConvertForCombine(pObj))
+        {
+            if(!pAttrObj)
+                pAttrObj = pObj;
+
+            nInsPos = pObj->GetOrdNum() + 1;
+            pInsPV = pM->GetPageView();
+            pInsOL = pObj->getParentSdrObjListFromSdrObject();
+
+            // #i76891# use single iteration from SJ here which works on SdrObjects and takes
+            // groups into account by itself
+            SdrObjListIter aIter(*pObj, SdrIterMode::DeepWithGroups);
+
+            while(aIter.IsMore())
+            {
+                SdrObject* pCandidate = aIter.Next();
+                SdrPathObj* pPathObj = dynamic_cast<SdrPathObj*>( pCandidate );
+                if(pPathObj)
+                {
+                    basegfx::B2DPolyPolygon aTmpPoly(pPathObj->GetPathPoly());
+
+                    // #i76891# unfortunately ConvertMarkedToPathObj has converted all
+                    // involved polygon data to curve segments, even if not necessary.
+                    // It is better to try to reduce to more simple polygons.
+                    aTmpPoly = basegfx::utils::simplifyCurveSegments(aTmpPoly);
+
+                    // for each part polygon as preparation, remove self-intersections
+                    // correct orientations and get rid of possible neutral polygons.
+                    aTmpPoly = basegfx::utils::prepareForPolygonOperation(aTmpPoly);
+
+                    if(!bFirstObjectComplete)
+                    {
+                        // #i111987# Also need to collect ORed source shape when more than
+                        // a single polygon is involved
+                        if(aMergePolyPolygonA.count())
+                        {
+                            aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aTmpPoly);
+                        }
+                        else
+                        {
+                            aMergePolyPolygonA = aTmpPoly;
+                        }
+                    }
+                    else
+                    {
+                        if(aMergePolyPolygonB.count())
+                        {
+                            // to topologically correctly collect the 2nd polygon
+                            // group it is necessary to OR the parts (each is seen as
+                            // XOR-FillRule polygon and they are drawn over each-other)
+                            aMergePolyPolygonB = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonB, aTmpPoly);
+                        }
+                        else
+                        {
+                            aMergePolyPolygonB = aTmpPoly;
+                        }
+                    }
+                }
+            }
+
+            // was there something added to the first polygon?
+            if(!bFirstObjectComplete && aMergePolyPolygonA.count())
+            {
+                bFirstObjectComplete = true;
+            }
+
+            // move object to temporary delete list
+            aRemove.InsertEntry(SdrMark(pObj, pM->GetPageView()));
+        }
+    }
+
+    switch(eMode)
+    {
+        case SdrMergeMode::Merge:
+        {
+            // merge all contained parts (OR)
+            aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aMergePolyPolygonB);
+            break;
+        }
+        case SdrMergeMode::Subtract:
+        {
+            // Subtract B from A
+            aMergePolyPolygonA = basegfx::utils::solvePolygonOperationDiff(aMergePolyPolygonA, aMergePolyPolygonB);
+            break;
+        }
+        case SdrMergeMode::Intersect:
+        {
+            // AND B and A
+            aMergePolyPolygonA = basegfx::utils::solvePolygonOperationAnd(aMergePolyPolygonA, aMergePolyPolygonB);
+            break;
+        }
+    }
+
+    // #i73441# check insert list before taking actions
+    if(pInsOL)
+    {
+        SdrPathObj* pPath = new SdrPathObj(pAttrObj->getSdrModelFromSdrObject(), OBJ_PATHFILL, aMergePolyPolygonA);
+        ImpCopyAttributes(pAttrObj, pPath);
+        pInsOL->InsertObject(pPath, nInsPos);
+        if( bUndo )
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath));
+
+        // #i124760# To have a correct selection with only the new object it is necessary to
+        // unmark all objects first. If not doing so, there may remain invalid pointers to objects
+        // TTTT:Not needed for aw080 (!)
+        UnmarkAllObj(pInsPV);
+
+        MarkObj(pPath, pInsPV, false, true);
+    }
+
+    aRemove.ForceSort();
+    switch(eMode)
+    {
+        case SdrMergeMode::Merge:
+        {
+            SetUndoComment(
+                SvxResId(STR_EditMergeMergePoly),
+                aRemove.GetMarkDescription());
+            break;
+        }
+        case SdrMergeMode::Subtract:
+        {
+            SetUndoComment(
+                SvxResId(STR_EditMergeSubstractPoly),
+                aRemove.GetMarkDescription());
+            break;
+        }
+        case SdrMergeMode::Intersect:
+        {
+            SetUndoComment(
+                SvxResId(STR_EditMergeIntersectPoly),
+                aRemove.GetMarkDescription());
+            break;
+        }
+    }
+    DeleteMarkedList(aRemove);
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::EqualizeMarkedObjects(bool bWidth)
+{
+    const SdrMarkList& rMarkList = GetMarkedObjectList();
+    size_t nMarked = rMarkList.GetMarkCount();
+
+    if (nMarked < 2)
+        return;
+
+    size_t nLastSelected = 0;
+    sal_Int64 nLastSelectedTime = rMarkList.GetMark(0)->getTimeStamp();
+    for (size_t a = 1; a < nMarked; ++a)
+    {
+        sal_Int64 nCandidateTime = rMarkList.GetMark(a)->getTimeStamp();
+        if (nCandidateTime > nLastSelectedTime)
+        {
+            nLastSelectedTime = nCandidateTime;
+            nLastSelected = a;
+        }
+    }
+
+    SdrObject* pLastSelectedObj = rMarkList.GetMark(nLastSelected)->GetMarkedSdrObj();
+    Size aLastRectSize(pLastSelectedObj->GetLogicRect().GetSize());
+
+    const bool bUndo = IsUndoEnabled();
+
+    if (bUndo)
+        BegUndo();
+
+    for (size_t a = 0; a < nMarked; ++a)
+    {
+        if (a == nLastSelected)
+            continue;
+        SdrMark* pM = rMarkList.GetMark(a);
+        SdrObject* pObj = pM->GetMarkedSdrObj();
+        tools::Rectangle aLogicRect(pObj->GetLogicRect());
+        Size aLogicRectSize(aLogicRect.GetSize());
+        if (bWidth)
+            aLogicRectSize.setWidth( aLastRectSize.Width() );
+        else
+            aLogicRectSize.setHeight( aLastRectSize.Height() );
+        aLogicRect.SetSize(aLogicRectSize);
+        if (bUndo)
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+        pObj->SetLogicRect(aLogicRect);
+    }
+
+    SetUndoComment(
+        SvxResId(bWidth ? STR_EqualizeWidthMarkedObjects : STR_EqualizeHeightMarkedObjects),
+        rMarkList.GetMarkDescription());
+
+    if (bUndo)
+        EndUndo();
+}
+
+void SdrEditView::CombineMarkedTextObjects()
+{
+    SdrPageView* pPageView = GetSdrPageView();
+    if ( !pPageView || pPageView->IsLayerLocked( GetActiveLayer() ) )
+        return;
+
+    bool bUndo = IsUndoEnabled();
+
+    // Undo-String will be set later
+    if ( bUndo )
+        BegUndo();
+
+    SdrOutliner& rDrawOutliner = getSdrModelFromSdrView().GetDrawOutliner();
+
+    SdrObjListIter aIter( GetMarkedObjectList(), SdrIterMode::Flat);
+    while ( aIter.IsMore() )
+    {
+        SdrObject* pObj = aIter.Next();
+        SdrTextObj* pTextObj = dynamic_cast<SdrTextObj*>( pObj );
+        const OutlinerParaObject* pOPO = pTextObj ? pTextObj->GetOutlinerParaObject() : nullptr;
+        if ( pOPO && pTextObj->IsTextFrame()
+             &&  pTextObj->GetObjIdentifier() == OBJ_TEXT   // not callouts (OBJ_CAPTION)
+             && !pTextObj->IsOutlText()                     // not impress presentation objects
+             &&  pTextObj->GetMergedItem(XATTR_FORMTXTSTYLE).GetValue() == XFormTextStyle::NONE // not Fontwork
+           )
+        {
+            // if the last paragraph does not end in paragraph-end punctuation (ignoring whitespace),
+            // assume this text should be added to the end of the last paragraph, instead of starting a new paragraph.
+            const sal_Int32 nPara = rDrawOutliner.GetParagraphCount();
+            const OUString sLastPara = nPara ? rDrawOutliner.GetText( rDrawOutliner.GetParagraph( nPara - 1 ) ) : "";
+            sal_Int32 n = sLastPara.getLength();
+            while ( n && unicode::isWhiteSpace( sLastPara[--n] ) )
+                ;
+            //TODO: find way to use Locale to identify sentence final punctuation. Copied IsSentenceAtEnd() from autofmt.cxx
+            const bool bAppend = !n || ( sLastPara[n] != '.' && sLastPara[n] != '?' && sLastPara[n] != '!' );
+            rDrawOutliner.AddText( *pOPO, bAppend );
+        }
+        else
+        {
+            // Unmark non-textboxes, because all marked objects are deleted at the end. AdjustMarkHdl later.
+            MarkObj(pObj, pPageView, /*bUnmark=*/true, /*bImpNoSetMarkHdl=*/true);
+        }
+    }
+
+    MarkListHasChanged();
+    AdjustMarkHdl();
+
+    if ( GetMarkedObjectCount() > 1 )
+    {
+        SdrRectObj* pReplacement = new SdrRectObj( getSdrModelFromSdrView(), OBJ_TEXT );
+        pReplacement->SetOutlinerParaObject( rDrawOutliner.CreateParaObject() );
+        pReplacement->SetSnapRect( GetMarkedObjRect() );
+
+        const SdrInsertFlags nFlags = SdrInsertFlags::DONTMARK | SdrInsertFlags::SETDEFLAYER;
+        if ( InsertObjectAtView( pReplacement, *pPageView, nFlags ) )
+            DeleteMarkedObj();
+    }
+
+    if ( bUndo )
+        EndUndo();
+
+    return;
+}
+
+void SdrEditView::CombineMarkedObjects(bool bNoPolyPoly)
+{
+    // #105899# Start of Combine-Undo put to front, else ConvertMarkedToPolyObj would
+    // create a 2nd Undo-action and Undo-Comment.
+
+    bool bUndo = IsUndoEnabled();
+
+    // Undo-String will be set later
+    if( bUndo )
+        BegUndo("", "", bNoPolyPoly ? SdrRepeatFunc::CombineOnePoly : SdrRepeatFunc::CombinePolyPoly);
+
+    // #105899# First, guarantee that all objects are converted to polyobjects,
+    // especially for SdrGrafObj with bitmap filling this is necessary to not
+    // lose the bitmap filling.
+
+    // #i12392#
+    // ConvertMarkedToPolyObj was too strong here, it will lose quality and
+    // information when curve objects are combined. This can be replaced by
+    // using ConvertMarkedToPathObj without changing the previous fix.
+
+    // #i21250#
+    // Instead of simply passing true as LineToArea, use bNoPolyPoly as info
+    // if this command is a 'Combine' or a 'Connect' command. On Connect it's true.
+    // To not concert line segments with a set line width to polygons in that case,
+    // use this info. Do not convert LineToArea on Connect commands.
+    // ConvertMarkedToPathObj(!bNoPolyPoly);
+
+    // This is used for Combine and Connect. In no case it is necessary to force
+    // the content to curve, but it is also not good to force to polygons. Thus,
+    // curve is the less information losing one. Remember: This place is not
+    // used for merge.
+    // LineToArea is never necessary, both commands are able to take over the
+    // set line style and to display it correctly. Thus, i will use a
+    // ConvertMarkedToPathObj with a false in any case. Only drawback is that
+    // simple polygons will be changed to curves, but with no information loss.
+    ConvertMarkedToPathObj(false /* bLineToArea */);
+
+    // continue as before
+    basegfx::B2DPolyPolygon aPolyPolygon;
+    SdrObjList* pCurrentOL = nullptr;
+    SdrMarkList aRemoveBuffer;
+
+    SortMarkedObjects();
+    size_t nInsPos = SAL_MAX_SIZE;
+    SdrObjList* pInsOL = nullptr;
+    SdrPageView* pInsPV = nullptr;
+    const SdrObject* pAttrObj = nullptr;
+
+    for(size_t a = GetMarkedObjectCount(); a; )
+    {
+        --a;
+        SdrMark* pM = GetSdrMarkByIndex(a);
+        SdrObject* pObj = pM->GetMarkedSdrObj();
+        SdrObjList* pThisOL = pObj->getParentSdrObjListFromSdrObject();
+
+        if(pCurrentOL != pThisOL)
+        {
+            pCurrentOL = pThisOL;
+        }
+
+        if(ImpCanConvertForCombine(pObj))
+        {
+            // remember objects to be able to copy attributes
+            pAttrObj = pObj;
+
+            // unfortunately ConvertMarkedToPathObj has converted all
+            // involved polygon data to curve segments, even if not necessary.
+            // It is better to try to reduce to more simple polygons.
+            basegfx::B2DPolyPolygon aTmpPoly(basegfx::utils::simplifyCurveSegments(ImpGetPolyPolygon(pObj)));
+            aPolyPolygon.insert(0, aTmpPoly);
+
+            if(!pInsOL)
+            {
+                nInsPos = pObj->GetOrdNum() + 1;
+                pInsPV = pM->GetPageView();
+                pInsOL = pObj->getParentSdrObjListFromSdrObject();
+            }
+
+            aRemoveBuffer.InsertEntry(SdrMark(pObj, pM->GetPageView()));
+        }
+    }
+
+    if(bNoPolyPoly)
+    {
+        basegfx::B2DPolygon aCombinedPolygon(ImpCombineToSinglePolygon(aPolyPolygon));
+        aPolyPolygon.clear();
+        aPolyPolygon.append(aCombinedPolygon);
+    }
+
+    const sal_uInt32 nPolyCount(aPolyPolygon.count());
+
+    if (nPolyCount && pAttrObj)
+    {
+        SdrObjKind eKind = OBJ_PATHFILL;
+
+        if(nPolyCount > 1)
+        {
+            aPolyPolygon.setClosed(true);
+        }
+        else
+        {
+            // check for Polyline
+            const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0));
+            const sal_uInt32 nPointCount(aPolygon.count());
+
+            if(nPointCount <= 2)
+            {
+                eKind = OBJ_PATHLINE;
+            }
+            else
+            {
+                if(!aPolygon.isClosed())
+                {
+                    const basegfx::B2DPoint aPointA(aPolygon.getB2DPoint(0));
+                    const basegfx::B2DPoint aPointB(aPolygon.getB2DPoint(nPointCount - 1));
+                    const double fDistance(basegfx::B2DVector(aPointB - aPointA).getLength());
+                    const double fJoinTolerance(10.0);
+
+                    if(fDistance < fJoinTolerance)
+                    {
+                        aPolyPolygon.setClosed(true);
+                    }
+                    else
+                    {
+                        eKind = OBJ_PATHLINE;
+                    }
+                }
+            }
+        }
+
+        SdrPathObj* pPath = new SdrPathObj(pAttrObj->getSdrModelFromSdrObject(), eKind, aPolyPolygon);
+
+        // attributes of the lowest object
+        ImpCopyAttributes(pAttrObj, pPath);
+
+        // If LineStyle of pAttrObj is drawing::LineStyle_NONE force to drawing::LineStyle_SOLID to make visible.
+        const drawing::LineStyle eLineStyle = pAttrObj->GetMergedItem(XATTR_LINESTYLE).GetValue();
+        const drawing::FillStyle eFillStyle = pAttrObj->GetMergedItem(XATTR_FILLSTYLE).GetValue();
+
+        // Take fill style/closed state of pAttrObj in account when deciding to change the line style
+        bool bIsClosedPathObj(dynamic_cast<const SdrPathObj*>( pAttrObj) != nullptr && static_cast<const SdrPathObj*>(pAttrObj)->IsClosed());
+
+        if(drawing::LineStyle_NONE == eLineStyle && (drawing::FillStyle_NONE == eFillStyle || !bIsClosedPathObj))
+        {
+            pPath->SetMergedItem(XLineStyleItem(drawing::LineStyle_SOLID));
+        }
+
+        pInsOL->InsertObject(pPath,nInsPos);
+        if( bUndo )
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath));
+
+        // Here was a severe error: Without UnmarkAllObj, the new object was marked
+        // additionally to the two ones which are deleted below. As long as those are
+        // in the UNDO there is no problem, but as soon as they get deleted, the
+        // MarkList will contain deleted objects -> GPF.
+        UnmarkAllObj(pInsPV);
+        MarkObj(pPath, pInsPV, false, true);
+    }
+
+    // build an UndoComment from the objects actually used
+    aRemoveBuffer.ForceSort(); // important for remove (see below)
+    if( bUndo )
+        SetUndoComment(SvxResId(bNoPolyPoly?STR_EditCombine_OnePoly:STR_EditCombine_PolyPoly),aRemoveBuffer.GetMarkDescription());
+
+    // remove objects actually used from the list
+    DeleteMarkedList(aRemoveBuffer);
+    if( bUndo )
+        EndUndo();
+}
+
+
+// Dismantle
+
+
+bool SdrEditView::ImpCanDismantle(const basegfx::B2DPolyPolygon& rPpolyPolygon, bool bMakeLines)
+{
+    bool bCan(false);
+    const sal_uInt32 nPolygonCount(rPpolyPolygon.count());
+
+    if(nPolygonCount >= 2)
+    {
+        // #i69172# dismantle makes sense with 2 or more polygons in a polyPolygon
+        bCan = true;
+    }
+    else if(bMakeLines && 1 == nPolygonCount)
+    {
+        // #i69172# ..or with at least 2 edges (curves or lines)
+        const basegfx::B2DPolygon& aPolygon(rPpolyPolygon.getB2DPolygon(0));
+        const sal_uInt32 nPointCount(aPolygon.count());
+
+        if(nPointCount > 2)
+        {
+            bCan = true;
+        }
+    }
+
+    return bCan;
+}
+
+bool SdrEditView::ImpCanDismantle(const SdrObject* pObj, bool bMakeLines)
+{
+    bool bOtherObjs(false);    // true=objects other than PathObj's existent
+    bool bMin1PolyPoly(false); // true=at least 1 tools::PolyPolygon with more than one Polygon existent
+    SdrObjList* pOL = pObj->GetSubList();
+
+    if(pOL)
+    {
+        // group object -- check all members if they're PathObjs
+        SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups);
+
+        while(aIter.IsMore() && !bOtherObjs)
+        {
+            const SdrObject* pObj1 = aIter.Next();
+            const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>( pObj1 );
+
+            if(pPath)
+            {
+                if(ImpCanDismantle(pPath->GetPathPoly(), bMakeLines))
+                {
+                    bMin1PolyPoly = true;
+                }
+
+                SdrObjTransformInfoRec aInfo;
+                pObj1->TakeObjInfo(aInfo);
+
+                if(!aInfo.bCanConvToPath)
+                {
+                    // happens e. g. in the case of FontWork
+                    bOtherObjs = true;
+                }
+            }
+            else
+            {
+                bOtherObjs = true;
+            }
+        }
+    }
+    else
+    {
+        const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>(pObj);
+        const SdrObjCustomShape* pCustomShape = dynamic_cast<const SdrObjCustomShape*>(pObj);
+
+        // #i37011#
+        if(pPath)
+        {
+            if(ImpCanDismantle(pPath->GetPathPoly(),bMakeLines))
+            {
+                bMin1PolyPoly = true;
+            }
+
+            SdrObjTransformInfoRec aInfo;
+            pObj->TakeObjInfo(aInfo);
+
+            // new condition IsLine() to be able to break simple Lines
+            if(!(aInfo.bCanConvToPath || aInfo.bCanConvToPoly) && !pPath->IsLine())
+            {
+                // happens e. g. in the case of FontWork
+                bOtherObjs = true;
+            }
+        }
+        else if(pCustomShape)
+        {
+            if(bMakeLines)
+            {
+                // allow break command
+                bMin1PolyPoly = true;
+            }
+        }
+        else
+        {
+            bOtherObjs = true;
+        }
+    }
+    return bMin1PolyPoly && !bOtherObjs;
+}
+
+void SdrEditView::ImpDismantleOneObject(const SdrObject* pObj, SdrObjList& rOL, size_t& rPos, SdrPageView* pPV, bool bMakeLines)
+{
+    const SdrPathObj* pSrcPath = dynamic_cast<const SdrPathObj*>( pObj );
+    const SdrObjCustomShape* pCustomShape = dynamic_cast<const SdrObjCustomShape*>( pObj );
+
+    const bool bUndo = IsUndoEnabled();
+
+    if(pSrcPath)
+    {
+        // #i74631# redesigned due to XpolyPolygon removal and explicit constructors
+        SdrObject* pLast = nullptr; // to be able to apply OutlinerParaObject
+        const basegfx::B2DPolyPolygon& rPolyPolygon(pSrcPath->GetPathPoly());
+        const sal_uInt32 nPolyCount(rPolyPolygon.count());
+
+        for(sal_uInt32 a(0); a < nPolyCount; a++)
+        {
+            const basegfx::B2DPolygon& rCandidate(rPolyPolygon.getB2DPolygon(a));
+            const sal_uInt32 nPointCount(rCandidate.count());
+
+            if(!bMakeLines || nPointCount < 2)
+            {
+                SdrPathObj* pPath = new SdrPathObj(
+                    pSrcPath->getSdrModelFromSdrObject(),
+                    static_cast<SdrObjKind>(pSrcPath->GetObjIdentifier()),
+                    basegfx::B2DPolyPolygon(rCandidate));
+                ImpCopyAttributes(pSrcPath, pPath);
+                pLast = pPath;
+                rOL.InsertObject(pPath, rPos);
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath, true));
+                MarkObj(pPath, pPV, false, true);
+                rPos++;
+            }
+            else
+            {
+                const sal_uInt32 nLoopCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1);
+
+                for(sal_uInt32 b(0); b < nLoopCount; b++)
+                {
+                    SdrObjKind eKind(OBJ_PLIN);
+                    basegfx::B2DPolygon aNewPolygon;
+                    const sal_uInt32 nNextIndex((b + 1) % nPointCount);
+
+                    aNewPolygon.append(rCandidate.getB2DPoint(b));
+
+                    if(rCandidate.areControlPointsUsed())
+                    {
+                        aNewPolygon.appendBezierSegment(
+                            rCandidate.getNextControlPoint(b),
+                            rCandidate.getPrevControlPoint(nNextIndex),
+                            rCandidate.getB2DPoint(nNextIndex));
+                        eKind = OBJ_PATHLINE;
+                    }
+                    else
+                    {
+                        aNewPolygon.append(rCandidate.getB2DPoint(nNextIndex));
+                    }
+
+                    SdrPathObj* pPath = new SdrPathObj(
+                        pSrcPath->getSdrModelFromSdrObject(),
+                        eKind,
+                        basegfx::B2DPolyPolygon(aNewPolygon));
+                    ImpCopyAttributes(pSrcPath, pPath);
+                    pLast = pPath;
+                    rOL.InsertObject(pPath, rPos);
+                    if( bUndo )
+                        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath, true));
+                    MarkObj(pPath, pPV, false, true);
+                    rPos++;
+                }
+            }
+        }
+
+        if(pLast && pSrcPath->GetOutlinerParaObject())
+        {
+            pLast->SetOutlinerParaObject(std::make_unique<OutlinerParaObject>(*pSrcPath->GetOutlinerParaObject()));
+        }
+    }
+    else if(pCustomShape)
+    {
+        if(bMakeLines)
+        {
+            // break up custom shape
+            const SdrObject* pReplacement = pCustomShape->GetSdrObjectFromCustomShape();
+
+            if(pReplacement)
+            {
+                SdrObject* pCandidate(pReplacement->CloneSdrObject(pReplacement->getSdrModelFromSdrObject()));
+                DBG_ASSERT(pCandidate, "SdrEditView::ImpDismantleOneObject: Could not clone SdrObject (!)");
+
+                if(pCustomShape->GetMergedItem(SDRATTR_SHADOW).GetValue())
+                {
+                    if(dynamic_cast<const SdrObjGroup*>( pReplacement) !=  nullptr)
+                    {
+                        pCandidate->SetMergedItem(makeSdrShadowItem(true));
+                    }
+                }
+
+                rOL.InsertObject(pCandidate, rPos);
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pCandidate, true));
+                MarkObj(pCandidate, pPV, false, true);
+
+                if(pCustomShape->HasText() && !pCustomShape->IsTextPath())
+                {
+                    // #i37011# also create a text object and add at rPos + 1
+                    SdrObject* pTextObj = SdrObjFactory::MakeNewObject(
+                        pCustomShape->getSdrModelFromSdrObject(),
+                        pCustomShape->GetObjInventor(),
+                        OBJ_TEXT);
+
+                    // Copy text content
+                    OutlinerParaObject* pParaObj = pCustomShape->GetOutlinerParaObject();
+                    if(pParaObj)
+                    {
+                        pTextObj->NbcSetOutlinerParaObject(std::make_unique<OutlinerParaObject>(*pParaObj));
+                    }
+
+                    // copy all attributes
+                    SfxItemSet aTargetItemSet(pCustomShape->GetMergedItemSet());
+
+                    // clear fill and line style
+                    aTargetItemSet.Put(XLineStyleItem(drawing::LineStyle_NONE));
+                    aTargetItemSet.Put(XFillStyleItem(drawing::FillStyle_NONE));
+
+                    // get the text bounds and set at text object
+                    tools::Rectangle aTextBounds = pCustomShape->GetSnapRect();
+                    if(pCustomShape->GetTextBounds(aTextBounds))
+                    {
+                        pTextObj->SetSnapRect(aTextBounds);
+                    }
+
+                    // if rotated, copy GeoStat, too.
+                    const GeoStat& rSourceGeo = pCustomShape->GetGeoStat();
+                    if(rSourceGeo.nRotationAngle)
+                    {
+                        pTextObj->NbcRotate(
+                            pCustomShape->GetSnapRect().Center(), rSourceGeo.nRotationAngle,
+                            rSourceGeo.nSin, rSourceGeo.nCos);
+                    }
+
+                    // set modified ItemSet at text object
+                    pTextObj->SetMergedItemSet(aTargetItemSet);
+
+                    // insert object
+                    rOL.InsertObject(pTextObj, rPos + 1);
+                    if( bUndo )
+                        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pTextObj, true));
+                    MarkObj(pTextObj, pPV, false, true);
+                }
+            }
+        }
+    }
+}
+
+void SdrEditView::DismantleMarkedObjects(bool bMakeLines)
+{
+    // temporary MarkList
+    SdrMarkList aRemoveBuffer;
+
+    SortMarkedObjects();
+
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        // comment is constructed later
+        BegUndo("", "", bMakeLines ? SdrRepeatFunc::DismantleLines : SdrRepeatFunc::DismantlePolys);
+    }
+
+    SdrObjList* pOL0=nullptr;
+    for (size_t nm=GetMarkedObjectCount(); nm>0;) {
+        --nm;
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrPageView* pPV=pM->GetPageView();
+        SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+        if (pOL!=pOL0) { pOL0=pOL; pObj->GetOrdNum(); } // make sure OrdNums are correct!
+        if (ImpCanDismantle(pObj,bMakeLines)) {
+            aRemoveBuffer.InsertEntry(SdrMark(pObj,pM->GetPageView()));
+            const size_t nPos0=pObj->GetOrdNumDirect();
+            size_t nPos=nPos0+1;
+            SdrObjList* pSubList=pObj->GetSubList();
+            if (pSubList!=nullptr && !pObj->Is3DObj()) {
+                SdrObjListIter aIter(pSubList,SdrIterMode::DeepNoGroups);
+                while (aIter.IsMore()) {
+                    const SdrObject* pObj1=aIter.Next();
+                    ImpDismantleOneObject(pObj1,*pOL,nPos,pPV,bMakeLines);
+                }
+            } else {
+                ImpDismantleOneObject(pObj,*pOL,nPos,pPV,bMakeLines);
+            }
+            if( bUndo )
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj,true));
+            pOL->RemoveObject(nPos0);
+
+            if( !bUndo )
+                SdrObject::Free(pObj);
+        }
+    }
+
+    if( bUndo )
+    {
+        // construct UndoComment from objects actually used
+        SetUndoComment(SvxResId(bMakeLines?STR_EditDismantle_Lines:STR_EditDismantle_Polys),aRemoveBuffer.GetMarkDescription());
+        // remove objects actually used from the list
+        EndUndo();
+    }
+}
+
+
+// Group
+
+
+void SdrEditView::GroupMarked()
+{
+    if (AreObjectsMarked())
+    {
+        SortMarkedObjects();
+
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+        {
+            BegUndo(SvxResId(STR_EditGroup),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::Group);
+
+            for(size_t nm = GetMarkedObjectCount(); nm>0; )
+            {
+                // add UndoActions for all affected objects
+                --nm;
+                SdrMark* pM=GetSdrMarkByIndex(nm);
+                SdrObject* pObj = pM->GetMarkedSdrObj();
+                AddUndoActions( CreateConnectorUndo( *pObj ) );
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoRemoveObject( *pObj ));
+            }
+        }
+
+        SdrMarkList aNewMark;
+        SdrPageView* pPV = GetSdrPageView();
+
+        if(pPV)
+        {
+            SdrObjList* pCurrentLst=pPV->GetObjList();
+            SdrObjList* pSrcLst=pCurrentLst;
+            SdrObjList* pSrcLst0=pSrcLst;
+            // make sure OrdNums are correct
+            if (pSrcLst->IsObjOrdNumsDirty())
+                pSrcLst->RecalcObjOrdNums();
+            SdrObject*  pGrp=nullptr;
+            SdrObjList* pDstLst=nullptr;
+            // if all selected objects come from foreign object lists.
+            // the group object is the last one in the list.
+            size_t      nInsPos=pSrcLst->GetObjCount();
+            bool        bNeedInsPos=true;
+            for (size_t nm=GetMarkedObjectCount(); nm>0;)
+            {
+                --nm;
+                SdrMark* pM=GetSdrMarkByIndex(nm);
+                if (pM->GetPageView()==pPV)
+                {
+                    SdrObject* pObj=pM->GetMarkedSdrObj();
+                    if (nullptr==pGrp)
+                    {
+                        pGrp = new SdrObjGroup(pObj->getSdrModelFromSdrObject());
+                        pDstLst=pGrp->GetSubList();
+                        DBG_ASSERT(pDstLst!=nullptr,"Alleged group object doesn't return object list.");
+                    }
+                    pSrcLst=pObj->getParentSdrObjListFromSdrObject();
+                    if (pSrcLst!=pSrcLst0)
+                    {
+                        if (pSrcLst->IsObjOrdNumsDirty())
+                            pSrcLst->RecalcObjOrdNums();
+                    }
+                    bool bForeignList=pSrcLst!=pCurrentLst;
+                    if (!bForeignList && bNeedInsPos)
+                    {
+                        nInsPos=pObj->GetOrdNum(); // this way, all ObjOrdNum of the page are set
+                        nInsPos++;
+                        bNeedInsPos=false;
+                    }
+                    pSrcLst->RemoveObject(pObj->GetOrdNumDirect());
+                    if (!bForeignList)
+                        nInsPos--; // correct InsertPos
+                    pDstLst->InsertObject(pObj,0);
+                    GetMarkedObjectListWriteAccess().DeleteMark(nm);
+                    pSrcLst0=pSrcLst;
+                }
+            }
+            if (pGrp!=nullptr)
+            {
+                aNewMark.InsertEntry(SdrMark(pGrp,pPV));
+                const size_t nCount=pDstLst->GetObjCount();
+                pCurrentLst->InsertObject(pGrp,nInsPos);
+                if( bUndo )
+                {
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pGrp,true)); // no recalculation!
+                    for (size_t no=0; no<nCount; ++no)
+                    {
+                        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoInsertObject(*pDstLst->GetObj(no)));
+                    }
+                }
+            }
+        }
+        GetMarkedObjectListWriteAccess().Merge(aNewMark);
+        MarkListHasChanged();
+
+        if( bUndo )
+            EndUndo();
+    }
+}
+
+
+// Ungroup
+
+
+void SdrEditView::UnGroupMarked()
+{
+    SdrMarkList aNewMark;
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+        BegUndo("", "", SdrRepeatFunc::Ungroup);
+
+    size_t nCount=0;
+    OUString aName1;
+    OUString aName;
+    bool bNameOk=false;
+    for (size_t nm=GetMarkedObjectCount(); nm>0;) {
+        --nm;
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pGrp=pM->GetMarkedSdrObj();
+        SdrObjList* pSrcLst=pGrp->GetSubList();
+        if (pSrcLst!=nullptr) {
+            nCount++;
+            if (nCount==1) {
+                aName = pGrp->TakeObjNameSingul();  // retrieve name of group
+                aName1 = pGrp->TakeObjNamePlural(); // retrieve name of group
+                bNameOk=true;
+            } else {
+                if (nCount==2) aName=aName1; // set plural name
+                if (bNameOk) {
+                    OUString aStr(pGrp->TakeObjNamePlural()); // retrieve name of group
+
+                    if (aStr != aName)
+                        bNameOk = false;
+                }
+            }
+            size_t nDstCnt=pGrp->GetOrdNum();
+            SdrObjList* pDstLst=pM->GetPageView()->GetObjList();
+
+            // FIRST move contained objects to parent of group, so that
+            // the contained objects are NOT migrated to the UNDO-ItemPool
+            // when AddUndo(new SdrUndoDelObj(*pGrp)) is called.
+            const size_t nObjCount=pSrcLst->GetObjCount();
+
+            if( bUndo )
+            {
+                for (size_t no=nObjCount; no>0;)
+                {
+                    no--;
+                    SdrObject* pObj=pSrcLst->GetObj(no);
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoRemoveObject(*pObj));
+                }
+            }
+            for (size_t no=0; no<nObjCount; ++no)
+            {
+                SdrObject* pObj=pSrcLst->RemoveObject(0);
+                pDstLst->InsertObject(pObj,nDstCnt);
+                if( bUndo )
+                    AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoInsertObject(*pObj,true));
+                nDstCnt++;
+                // No SortCheck when inserting into MarkList, because that would
+                // provoke a RecalcOrdNums() each time because of pObj->GetOrdNum():
+                aNewMark.InsertEntry(SdrMark(pObj,pM->GetPageView()),false);
+            }
+
+            if( bUndo )
+            {
+                // Now it is safe to add the delete-UNDO which triggers the
+                // MigrateItemPool now only for itself, not for the sub-objects.
+                // nDstCnt is right, because previous inserts move group
+                // object deeper and increase nDstCnt.
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pGrp));
+            }
+            pDstLst->RemoveObject(nDstCnt);
+
+            if( !bUndo )
+                SdrObject::Free(pGrp);
+
+            GetMarkedObjectListWriteAccess().DeleteMark(nm);
+        }
+    }
+    if (nCount!=0)
+    {
+        if (!bNameOk)
+            aName=SvxResId(STR_ObjNamePluralGRUP); // Use the term "Group Objects," if different objects are grouped.
+        SetUndoComment(SvxResId(STR_EditUngroup),aName);
+    }
+
+    if( bUndo )
+        EndUndo();
+
+    if (nCount!=0)
+    {
+        GetMarkedObjectListWriteAccess().Merge(aNewMark,true); // Because of the sorting above, aNewMark is reversed
+        MarkListHasChanged();
+    }
+}
+
+
+// ConvertToPoly
+
+
+SdrObject* SdrEditView::ImpConvertOneObj(SdrObject* pObj, bool bPath, bool bLineToArea)
+{
+    SdrObjectUniquePtr pNewObj = pObj->ConvertToPolyObj(bPath, bLineToArea);
+    if (pNewObj)
+    {
+        SdrObjList* pOL = pObj->getParentSdrObjListFromSdrObject();
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoReplaceObject(*pObj,*pNewObj));
+
+        pOL->ReplaceObject(pNewObj.get(), pObj->GetOrdNum());
+
+        if( !bUndo )
+            SdrObject::Free(pObj);
+    }
+    return pNewObj.release();
+}
+
+void SdrEditView::ImpConvertTo(bool bPath, bool bLineToArea)
+{
+    if (AreObjectsMarked()) {
+        bool bMrkChg = false;
+        const size_t nMarkCount=GetMarkedObjectCount();
+        const char* pDscrID = nullptr;
+        if(bLineToArea)
+        {
+            if(nMarkCount == 1)
+                pDscrID = STR_EditConvToContour;
+            else
+                pDscrID = STR_EditConvToContours;
+
+            BegUndo(SvxResId(pDscrID), GetDescriptionOfMarkedObjects());
+        }
+        else
+        {
+            if (bPath) {
+                if (nMarkCount==1) pDscrID=STR_EditConvToCurve;
+                else pDscrID=STR_EditConvToCurves;
+                BegUndo(SvxResId(pDscrID),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ConvertToPath);
+            } else {
+                if (nMarkCount==1) pDscrID=STR_EditConvToPoly;
+                else pDscrID=STR_EditConvToPolys;
+                BegUndo(SvxResId(pDscrID),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ConvertToPoly);
+            }
+        }
+        for (size_t nm=nMarkCount; nm>0;) {
+            --nm;
+            SdrMark* pM=GetSdrMarkByIndex(nm);
+            SdrObject* pObj=pM->GetMarkedSdrObj();
+            SdrPageView* pPV=pM->GetPageView();
+            if (pObj->IsGroupObject() && !pObj->Is3DObj()) {
+                SdrObject* pGrp=pObj;
+                SdrObjListIter aIter(*pGrp, SdrIterMode::DeepNoGroups);
+                while (aIter.IsMore()) {
+                    pObj=aIter.Next();
+                    ImpConvertOneObj(pObj,bPath,bLineToArea);
+                }
+            } else {
+                SdrObject* pNewObj=ImpConvertOneObj(pObj,bPath,bLineToArea);
+                if (pNewObj!=nullptr) {
+                    bMrkChg=true;
+                    GetMarkedObjectListWriteAccess().ReplaceMark(SdrMark(pNewObj,pPV),nm);
+                }
+            }
+        }
+        EndUndo();
+        if (bMrkChg)
+        {
+            AdjustMarkHdl();
+            MarkListHasChanged();
+        }
+    }
+}
+
+void SdrEditView::ConvertMarkedToPathObj(bool bLineToArea)
+{
+    ImpConvertTo(true, bLineToArea);
+}
+
+void SdrEditView::ConvertMarkedToPolyObj()
+{
+    ImpConvertTo(false, false/*bLineToArea*/);
+}
+
+namespace
+{
+    GDIMetaFile GetMetaFile(SdrGrafObj const * pGraf)
+    {
+        if (pGraf->HasGDIMetaFile())
+            return pGraf->GetTransformedGraphic(SdrGrafObjTransformsAttrs::MIRROR).GetGDIMetaFile();
+        assert(pGraf->isEmbeddedVectorGraphicData());
+        return pGraf->getMetafileFromEmbeddedVectorGraphicData();
+    }
+}
+
+// Metafile Import
+void SdrEditView::DoImportMarkedMtf(SvdProgressInfo *pProgrInfo)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+        BegUndo("", "", SdrRepeatFunc::ImportMtf);
+
+    SortMarkedObjects();
+    SdrMarkList aForTheDescription;
+    SdrMarkList aNewMarked;
+    for (size_t nm =GetMarkedObjectCount(); nm > 0; )
+    {
+        // create Undo objects for all new objects
+        // check for cancellation between the metafiles
+        if (pProgrInfo != nullptr)
+        {
+            pProgrInfo->SetNextObject();
+            if (!pProgrInfo->ReportActions(0))
+                break;
+        }
+
+        --nm;
+        SdrMark*     pM=GetSdrMarkByIndex(nm);
+        SdrObject*   pObj=pM->GetMarkedSdrObj();
+        SdrPageView* pPV=pM->GetPageView();
+        SdrObjList*  pOL=pObj->getParentSdrObjListFromSdrObject();
+        const size_t nInsPos=pObj->GetOrdNum()+1;
+        size_t      nInsCnt=0;
+        tools::Rectangle aLogicRect;
+
+        SdrGrafObj*  pGraf = dynamic_cast<SdrGrafObj*>( pObj );
+        if (pGraf != nullptr)
+        {
+            Graphic aGraphic = pGraf->GetGraphic();
+            auto const & pVectorGraphicData = aGraphic.getVectorGraphicData();
+
+            if (pVectorGraphicData && pVectorGraphicData->getVectorGraphicDataType() == VectorGraphicDataType::Pdf)
+            {
+#if HAVE_FEATURE_PDFIUM
+                aLogicRect = pGraf->GetLogicRect();
+                ImpSdrPdfImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect, aGraphic);
+                if (aGraphic.getPageNumber() < aFilter.GetPageCount())
+                {
+                    nInsCnt = aFilter.DoImport(*pOL, nInsPos, aGraphic.getPageNumber(), pProgrInfo);
+                }
+#endif // HAVE_FEATURE_PDFIUM
+            }
+            else if (pGraf->HasGDIMetaFile() || pGraf->isEmbeddedVectorGraphicData() )
+            {
+                GDIMetaFile aMetaFile(GetMetaFile(pGraf));
+                if (aMetaFile.GetActionSize())
+                {
+                    aLogicRect = pGraf->GetLogicRect();
+                    ImpSdrGDIMetaFileImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect);
+                    nInsCnt = aFilter.DoImport(aMetaFile, *pOL, nInsPos, pProgrInfo);
+                }
+            }
+        }
+
+        SdrOle2Obj* pOle2 = dynamic_cast<SdrOle2Obj*>(pObj);
+        if (pOle2 != nullptr && pOle2->GetGraphic())
+        {
+            aLogicRect = pOle2->GetLogicRect();
+            ImpSdrGDIMetaFileImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect);
+            nInsCnt = aFilter.DoImport(pOle2->GetGraphic()->GetGDIMetaFile(), *pOL, nInsPos, pProgrInfo);
+        }
+
+        if (nInsCnt != 0)
+        {
+            // transformation
+            GeoStat aGeoStat(pGraf ? pGraf->GetGeoStat() : pOle2->GetGeoStat());
+            size_t nObj = nInsPos;
+
+            if (aGeoStat.nShearAngle)
+                aGeoStat.RecalcTan();
+
+            if (aGeoStat.nRotationAngle)
+                aGeoStat.RecalcSinCos();
+
+            for (size_t i = 0; i < nInsCnt; i++)
+            {
+                if (bUndo)
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pOL->GetObj(nObj)));
+
+                // update new MarkList
+                SdrObject* pCandidate = pOL->GetObj(nObj);
+
+                // apply original transformation
+                if (aGeoStat.nShearAngle)
+                    pCandidate->NbcShear(aLogicRect.TopLeft(), aGeoStat.nShearAngle, aGeoStat.nTan, false);
+
+                if (aGeoStat.nRotationAngle)
+                    pCandidate->NbcRotate(aLogicRect.TopLeft(), aGeoStat.nRotationAngle, aGeoStat.nSin, aGeoStat.nCos);
+
+                SdrMark aNewMark(pCandidate, pPV);
+                aNewMarked.InsertEntry(aNewMark);
+
+                nObj++;
+            }
+
+            aForTheDescription.InsertEntry(*pM);
+
+            if (bUndo)
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj));
+
+            // remove object from selection and delete
+            GetMarkedObjectListWriteAccess().DeleteMark(TryToFindMarkedObject(pObj));
+            pOL->RemoveObject(nInsPos-1);
+
+            if (!bUndo)
+                SdrObject::Free(pObj);
+        }
+    }
+
+    if (aNewMarked.GetMarkCount())
+    {
+        // create new selection
+        for (size_t a = 0; a < aNewMarked.GetMarkCount(); ++a)
+        {
+            GetMarkedObjectListWriteAccess().InsertEntry(*aNewMarked.GetMark(a));
+        }
+
+        SortMarkedObjects();
+    }
+
+    if (bUndo)
+    {
+        SetUndoComment(SvxResId(STR_EditImportMtf),aForTheDescription.GetMarkDescription());
+        EndUndo();
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdedxv.cxx b/svx/source/svdraw/svdedxv.cxx
new file mode 100644
index 000000000..647fe0470
--- /dev/null
+++ b/svx/source/svdraw/svdedxv.cxx
@@ -0,0 +1,2833 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <com/sun/star/i18n/WordType.hpp>
+#include <editeng/editdata.hxx>
+#include <editeng/editeng.hxx>
+#include <editeng/editobj.hxx>
+#include <editeng/editstat.hxx>
+#include <editeng/outlobj.hxx>
+#include <editeng/unotext.hxx>
+#include <svl/itemiter.hxx>
+#include <svl/style.hxx>
+#include <svl/whiter.hxx>
+#include <svtools/accessibilityoptions.hxx>
+#include <svx/sdtfchim.hxx>
+#include <svx/selectioncontroller.hxx>
+#include <svx/svdedxv.hxx>
+#include <svx/svdetc.hxx>
+#include <svx/svdotable.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdundo.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/commandevent.hxx>
+#include <vcl/cursor.hxx>
+#include <vcl/weld.hxx>
+#include <comphelper/lok.hxx>
+#include <drawinglayer/processor2d/baseprocessor2d.hxx>
+#include <drawinglayer/processor2d/processor2dtools.hxx>
+#include <editeng/outliner.hxx>
+#include <sal/log.hxx>
+#include <sdr/overlay/overlaytools.hxx>
+#include <sfx2/viewsh.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <svx/sdr/overlay/overlayselection.hxx>
+#include <svx/sdr/table/tablecontroller.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <svx/sdrundomanager.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdviter.hxx>
+#include <textchain.hxx>
+#include <textchaincursor.hxx>
+#include <tools/debug.hxx>
+#include <vcl/svapp.hxx>
+
+#include <memory>
+
+void SdrObjEditView::ImpClearVars()
+{
+    bQuickTextEditMode = true;
+    pTextEditOutliner.reset();
+    pTextEditOutlinerView = nullptr;
+    pTextEditPV = nullptr;
+    pTextEditWin = nullptr;
+    pTextEditCursorBuffer = nullptr;
+    bTextEditNewObj = false;
+    bMacroDown = false;
+    pMacroObj = nullptr;
+    pMacroPV = nullptr;
+    pMacroWin = nullptr;
+    nMacroTol = 0;
+    bTextEditDontDelete = false;
+    bTextEditOnlyOneView = false;
+}
+
+SdrObjEditView::SdrObjEditView(SdrModel& rSdrModel, OutputDevice* pOut)
+    : SdrGlueEditView(rSdrModel, pOut)
+    , mpOldTextEditUndoManager(nullptr)
+{
+    ImpClearVars();
+}
+
+SdrObjEditView::~SdrObjEditView()
+{
+    pTextEditWin = nullptr; // so there's no ShowCursor in SdrEndTextEdit
+    assert(!IsTextEdit());
+    if (IsTextEdit())
+        SdrEndTextEdit();
+    pTextEditOutliner.reset();
+    assert(nullptr == mpOldTextEditUndoManager); // should have been reset
+}
+
+bool SdrObjEditView::IsAction() const { return IsMacroObj() || SdrGlueEditView::IsAction(); }
+
+void SdrObjEditView::MovAction(const Point& rPnt)
+{
+    if (IsMacroObj())
+        MovMacroObj(rPnt);
+    SdrGlueEditView::MovAction(rPnt);
+}
+
+void SdrObjEditView::EndAction()
+{
+    if (IsMacroObj())
+        EndMacroObj();
+    SdrGlueEditView::EndAction();
+}
+
+void SdrObjEditView::BckAction()
+{
+    BrkMacroObj();
+    SdrGlueEditView::BckAction();
+}
+
+void SdrObjEditView::BrkAction()
+{
+    BrkMacroObj();
+    SdrGlueEditView::BrkAction();
+}
+
+SdrPageView* SdrObjEditView::ShowSdrPage(SdrPage* pPage)
+{
+    SdrPageView* pPageView = SdrGlueEditView::ShowSdrPage(pPage);
+
+    if (comphelper::LibreOfficeKit::isActive() && pPageView)
+    {
+        // Check if other views have an active text edit on the same page as
+        // this one.
+        SdrViewIter aIter(pPageView->GetPage());
+        for (SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView())
+        {
+            if (pView == this || !pView->IsTextEdit())
+                continue;
+
+            OutputDevice* pOutDev = GetFirstOutputDevice();
+            if (!pOutDev || pOutDev->GetOutDevType() != OUTDEV_WINDOW)
+                continue;
+
+            // Found one, so create an outliner view, to get invalidations when
+            // the text edit changes.
+            // Call GetSfxViewShell() to make sure ImpMakeOutlinerView()
+            // registers the view shell of this draw view, and not the view
+            // shell of pView.
+            OutlinerView* pOutlinerView = pView->ImpMakeOutlinerView(
+                static_cast<vcl::Window*>(pOutDev), nullptr, GetSfxViewShell());
+            pOutlinerView->HideCursor();
+            pView->GetTextEditOutliner()->InsertView(pOutlinerView);
+        }
+    }
+
+    return pPageView;
+}
+
+namespace
+{
+/// Removes outliner views registered in other draw views that use pOutputDevice.
+void lcl_RemoveTextEditOutlinerViews(SdrObjEditView const* pThis, SdrPageView const* pPageView,
+                                     OutputDevice const* pOutputDevice)
+{
+    if (!comphelper::LibreOfficeKit::isActive())
+        return;
+
+    if (!pPageView)
+        return;
+
+    if (!pOutputDevice || pOutputDevice->GetOutDevType() != OUTDEV_WINDOW)
+        return;
+
+    SdrViewIter aIter(pPageView->GetPage());
+    for (SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView())
+    {
+        if (pView == pThis || !pView->IsTextEdit())
+            continue;
+
+        SdrOutliner* pOutliner = pView->GetTextEditOutliner();
+        for (size_t nView = 0; nView < pOutliner->GetViewCount(); ++nView)
+        {
+            OutlinerView* pOutlinerView = pOutliner->GetView(nView);
+            if (pOutlinerView->GetWindow() != pOutputDevice)
+                continue;
+
+            pOutliner->RemoveView(pOutlinerView);
+            delete pOutlinerView;
+        }
+    }
+}
+}
+
+void SdrObjEditView::HideSdrPage()
+{
+    lcl_RemoveTextEditOutlinerViews(this, GetSdrPageView(), GetFirstOutputDevice());
+
+    SdrGlueEditView::HideSdrPage();
+}
+
+void SdrObjEditView::TakeActionRect(tools::Rectangle& rRect) const
+{
+    if (IsMacroObj())
+    {
+        rRect = pMacroObj->GetCurrentBoundRect();
+    }
+    else
+    {
+        SdrGlueEditView::TakeActionRect(rRect);
+    }
+}
+
+void SdrObjEditView::Notify(SfxBroadcaster& rBC, const SfxHint& rHint)
+{
+    SdrGlueEditView::Notify(rBC, rHint);
+    if (pTextEditOutliner != nullptr)
+    {
+        // change of printer while editing
+        if (rHint.GetId() == SfxHintId::ThisIsAnSdrHint)
+        {
+            const SdrHint* pSdrHint = static_cast<const SdrHint*>(&rHint);
+            SdrHintKind eKind = pSdrHint->GetKind();
+            if (eKind == SdrHintKind::RefDeviceChange)
+            {
+                pTextEditOutliner->SetRefDevice(mpModel->GetRefDevice());
+            }
+            if (eKind == SdrHintKind::DefaultTabChange)
+            {
+                pTextEditOutliner->SetDefTab(mpModel->GetDefaultTabulator());
+            }
+        }
+    }
+}
+
+void SdrObjEditView::ModelHasChanged()
+{
+    SdrGlueEditView::ModelHasChanged();
+    if (mxTextEditObj.is() && !mxTextEditObj->IsInserted())
+        SdrEndTextEdit(); // object deleted
+    // TextEditObj changed?
+    if (IsTextEdit())
+    {
+        SdrTextObj* pTextObj = mxTextEditObj.get();
+        if (pTextObj != nullptr)
+        {
+            size_t nOutlViewCnt = pTextEditOutliner->GetViewCount();
+            bool bAreaChg = false;
+            bool bAnchorChg = false;
+            bool bColorChg = false;
+            bool bContourFrame = pTextObj->IsContourTextFrame();
+            EEAnchorMode eNewAnchor(EEAnchorMode::VCenterHCenter);
+            tools::Rectangle aOldArea(aMinTextEditArea);
+            aOldArea.Union(aTextEditArea);
+            Color aNewColor;
+            { // check area
+                Size aPaperMin1;
+                Size aPaperMax1;
+                tools::Rectangle aEditArea1;
+                tools::Rectangle aMinArea1;
+                pTextObj->TakeTextEditArea(&aPaperMin1, &aPaperMax1, &aEditArea1, &aMinArea1);
+                Point aPvOfs(pTextObj->GetTextEditOffset());
+
+                // add possible GridOffset to up-to-now view-independent EditAreas
+                basegfx::B2DVector aGridOffset(0.0, 0.0);
+                if (getPossibleGridOffsetForSdrObject(aGridOffset, pTextObj, GetSdrPageView()))
+                {
+                    const Point aOffset(basegfx::fround(aGridOffset.getX()),
+                                        basegfx::fround(aGridOffset.getY()));
+
+                    aEditArea1 += aOffset;
+                    aMinArea1 += aOffset;
+                }
+
+                aEditArea1.Move(aPvOfs.X(), aPvOfs.Y());
+                aMinArea1.Move(aPvOfs.X(), aPvOfs.Y());
+                tools::Rectangle aNewArea(aMinArea1);
+                aNewArea.Union(aEditArea1);
+
+                if (aNewArea != aOldArea || aEditArea1 != aTextEditArea
+                    || aMinArea1 != aMinTextEditArea
+                    || pTextEditOutliner->GetMinAutoPaperSize() != aPaperMin1
+                    || pTextEditOutliner->GetMaxAutoPaperSize() != aPaperMax1)
+                {
+                    aTextEditArea = aEditArea1;
+                    aMinTextEditArea = aMinArea1;
+                    pTextEditOutliner->SetUpdateMode(false);
+                    pTextEditOutliner->SetMinAutoPaperSize(aPaperMin1);
+                    pTextEditOutliner->SetMaxAutoPaperSize(aPaperMax1);
+                    pTextEditOutliner->SetPaperSize(Size(0, 0)); // re-format Outliner
+                    if (!bContourFrame)
+                    {
+                        pTextEditOutliner->ClearPolygon();
+                        EEControlBits nStat = pTextEditOutliner->GetControlWord();
+                        nStat |= EEControlBits::AUTOPAGESIZE;
+                        pTextEditOutliner->SetControlWord(nStat);
+                    }
+                    else
+                    {
+                        EEControlBits nStat = pTextEditOutliner->GetControlWord();
+                        nStat &= ~EEControlBits::AUTOPAGESIZE;
+                        pTextEditOutliner->SetControlWord(nStat);
+                        tools::Rectangle aAnchorRect;
+                        pTextObj->TakeTextAnchorRect(aAnchorRect);
+                        pTextObj->ImpSetContourPolygon(*pTextEditOutliner, aAnchorRect, true);
+                    }
+                    for (size_t nOV = 0; nOV < nOutlViewCnt; nOV++)
+                    {
+                        OutlinerView* pOLV = pTextEditOutliner->GetView(nOV);
+                        EVControlBits nStat0 = pOLV->GetControlWord();
+                        EVControlBits nStat = nStat0;
+                        // AutoViewSize only if not ContourFrame.
+                        if (!bContourFrame)
+                            nStat |= EVControlBits::AUTOSIZE;
+                        else
+                            nStat &= ~EVControlBits::AUTOSIZE;
+                        if (nStat != nStat0)
+                            pOLV->SetControlWord(nStat);
+                    }
+                    pTextEditOutliner->SetUpdateMode(true);
+                    bAreaChg = true;
+                }
+            }
+            if (pTextEditOutlinerView != nullptr)
+            { // check fill and anchor
+                EEAnchorMode eOldAnchor = pTextEditOutlinerView->GetAnchorMode();
+                eNewAnchor = pTextObj->GetOutlinerViewAnchorMode();
+                bAnchorChg = eOldAnchor != eNewAnchor;
+                Color aOldColor(pTextEditOutlinerView->GetBackgroundColor());
+                aNewColor = GetTextEditBackgroundColor(*this);
+                bColorChg = aOldColor != aNewColor;
+            }
+            // refresh always when it's a contour frame. That
+            // refresh is necessary since it triggers the repaint
+            // which makes the Handles visible. Changes at TakeTextRect()
+            // seem to have resulted in a case where no refresh is executed.
+            // Before that, a refresh must have been always executed
+            // (else this error would have happened earlier), thus I
+            // even think here a refresh should be done always.
+            // Since follow-up problems cannot even be guessed I only
+            // add this one more case to the if below.
+            // BTW: It's VERY bad style that here, inside ModelHasChanged()
+            // the outliner is again massively changed for the text object
+            // in text edit mode. Normally, all necessary data should be
+            // set at SdrBeginTextEdit(). Some changes and value assigns in
+            // SdrBeginTextEdit() are completely useless since they are set here
+            // again on ModelHasChanged().
+            if (bContourFrame || bAreaChg || bAnchorChg || bColorChg)
+            {
+                for (size_t nOV = 0; nOV < nOutlViewCnt; nOV++)
+                {
+                    OutlinerView* pOLV = pTextEditOutliner->GetView(nOV);
+                    { // invalidate old OutlinerView area
+                        vcl::Window* pWin = pOLV->GetWindow();
+                        tools::Rectangle aTmpRect(aOldArea);
+                        sal_uInt16 nPixSiz = pOLV->GetInvalidateMore() + 1;
+                        Size aMore(pWin->PixelToLogic(Size(nPixSiz, nPixSiz)));
+                        aTmpRect.AdjustLeft(-(aMore.Width()));
+                        aTmpRect.AdjustRight(aMore.Width());
+                        aTmpRect.AdjustTop(-(aMore.Height()));
+                        aTmpRect.AdjustBottom(aMore.Height());
+                        InvalidateOneWin(*pWin, aTmpRect);
+                    }
+                    if (bAnchorChg)
+                        pOLV->SetAnchorMode(eNewAnchor);
+                    if (bColorChg)
+                        pOLV->SetBackgroundColor(aNewColor);
+
+                    pOLV->SetOutputArea(
+                        aTextEditArea); // because otherwise, we're not re-anchoring correctly
+                    ImpInvalidateOutlinerView(*pOLV);
+                }
+                pTextEditOutlinerView->ShowCursor();
+            }
+        }
+        ImpMakeTextCursorAreaVisible();
+    }
+}
+
+namespace
+{
+/**
+        Helper class to visualize the content of an active EditView as an
+        OverlayObject. These objects work with Primitives and are handled
+        from the OverlayManager(s) in place as needed.
+
+        It allows complete visualization of the content of the active
+        EditView without the need of Invalidates triggered by the EditView
+        and thus avoiding potentially expensive repaints by using the
+        automatically buffered Overlay mechanism.
+
+        It buffers as much as possible locally and *only* triggers a real
+        change (see call to objectChange()) when really needed.
+     */
+class TextEditOverlayObject : public sdr::overlay::OverlayObject
+{
+protected:
+    /// local access to associated sdr::overlay::OverlaySelection
+    sdr::overlay::OverlaySelection* mpOverlaySelection;
+
+    /// local definition depends on active OutlinerView
+    OutlinerView& mrOutlinerView;
+
+    /// geometry definitions with buffering
+    basegfx::B2DRange maLastRange;
+    basegfx::B2DRange maRange;
+
+    /// text content definitions with buffering
+    drawinglayer::primitive2d::Primitive2DContainer maTextPrimitives;
+    drawinglayer::primitive2d::Primitive2DContainer maLastTextPrimitives;
+
+    /// bitfield
+    bool mbVisualizeSurroundingFrame : 1;
+
+    // geometry creation for OverlayObject, can use local *Last* values
+    virtual drawinglayer::primitive2d::Primitive2DContainer
+    createOverlayObjectPrimitive2DSequence() override;
+
+public:
+    TextEditOverlayObject(const Color& rColor, OutlinerView& rOutlinerView,
+                          bool bVisualizeSurroundingFrame);
+    virtual ~TextEditOverlayObject() override;
+
+    // data read access
+    const sdr::overlay::OverlaySelection* getOverlaySelection() const { return mpOverlaySelection; }
+    const OutlinerView& getOutlinerView() const { return mrOutlinerView; }
+
+    /// override to check conditions for last createOverlayObjectPrimitive2DSequence
+    virtual drawinglayer::primitive2d::Primitive2DContainer
+    getOverlayObjectPrimitive2DSequence() const override;
+
+    // data write access. In this OverlayObject we only have the
+    // callback that triggers detecting if something *has* changed
+    void checkDataChange(const basegfx::B2DRange& rMinTextEditArea);
+    void checkSelectionChange();
+};
+
+drawinglayer::primitive2d::Primitive2DContainer
+TextEditOverlayObject::createOverlayObjectPrimitive2DSequence()
+{
+    drawinglayer::primitive2d::Primitive2DContainer aRetval;
+
+    /// outer frame visualization
+    if (mbVisualizeSurroundingFrame)
+    {
+        const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+        const double fTransparence(aSvtOptionsDrawinglayer.GetTransparentSelectionPercent() * 0.01);
+        const sal_uInt16 nPixSiz(getOutlinerView().GetInvalidateMore() - 1);
+
+        aRetval.push_back(new drawinglayer::primitive2d::OverlayRectanglePrimitive(
+            maRange, getBaseColor().getBColor(), fTransparence, std::max(6, nPixSiz - 2), // grow
+            0.0, // shrink
+            0.0));
+    }
+
+    // add buffered TextPrimitives
+    aRetval.append(maTextPrimitives);
+
+    return aRetval;
+}
+
+TextEditOverlayObject::TextEditOverlayObject(const Color& rColor, OutlinerView& rOutlinerView,
+                                             bool bVisualizeSurroundingFrame)
+    : OverlayObject(rColor)
+    , mpOverlaySelection(nullptr)
+    , mrOutlinerView(rOutlinerView)
+    , maLastRange()
+    , maRange()
+    , maTextPrimitives()
+    , maLastTextPrimitives()
+    , mbVisualizeSurroundingFrame(bVisualizeSurroundingFrame)
+{
+    // no AA for TextEdit overlay
+    allowAntiAliase(false);
+
+    // create local OverlaySelection - this is an integral part of EditText
+    // visualization
+    const std::vector<basegfx::B2DRange> aEmptySelection{};
+    mpOverlaySelection = new sdr::overlay::OverlaySelection(sdr::overlay::OverlayType::Transparent,
+                                                            rColor, aEmptySelection, true);
+}
+
+TextEditOverlayObject::~TextEditOverlayObject()
+{
+    if (getOverlaySelection())
+    {
+        delete mpOverlaySelection;
+        mpOverlaySelection = nullptr;
+    }
+
+    if (getOverlayManager())
+    {
+        getOverlayManager()->remove(*this);
+    }
+}
+
+drawinglayer::primitive2d::Primitive2DContainer
+TextEditOverlayObject::getOverlayObjectPrimitive2DSequence() const
+{
+    if (!getPrimitive2DSequence().empty())
+    {
+        if (!maRange.equal(maLastRange) || maLastTextPrimitives != maTextPrimitives)
+        {
+            // conditions of last local decomposition have changed, delete to force new evaluation
+            const_cast<TextEditOverlayObject*>(this)->resetPrimitive2DSequence();
+        }
+    }
+
+    if (getPrimitive2DSequence().empty())
+    {
+        // remember new buffered values
+        const_cast<TextEditOverlayObject*>(this)->maLastRange = maRange;
+        const_cast<TextEditOverlayObject*>(this)->maLastTextPrimitives = maTextPrimitives;
+    }
+
+    // call base implementation
+    return OverlayObject::getOverlayObjectPrimitive2DSequence();
+}
+
+void TextEditOverlayObject::checkDataChange(const basegfx::B2DRange& rMinTextEditArea)
+{
+    bool bObjectChange(false);
+
+    // check current range
+    const tools::Rectangle aOutArea(mrOutlinerView.GetOutputArea());
+    basegfx::B2DRange aNewRange = vcl::unotools::b2DRectangleFromRectangle(aOutArea);
+    aNewRange.expand(rMinTextEditArea);
+
+    if (aNewRange != maRange)
+    {
+        maRange = aNewRange;
+        bObjectChange = true;
+    }
+
+    // check if text primitives did change
+    SdrOutliner* pSdrOutliner = dynamic_cast<SdrOutliner*>(getOutlinerView().GetOutliner());
+
+    if (pSdrOutliner)
+    {
+        // get TextPrimitives directly from active Outliner
+        basegfx::B2DHomMatrix aNewTransformA;
+        basegfx::B2DHomMatrix aNewTransformB;
+        basegfx::B2DRange aClipRange;
+        drawinglayer::primitive2d::Primitive2DContainer aNewTextPrimitives;
+
+        // active Outliner is always in unified oriented coordinate system (currently)
+        // so just translate to TopLeft of visible Range. Keep in mind that top-left
+        // depends on vertical text and top-to-bottom text attributes
+        const tools::Rectangle aVisArea(mrOutlinerView.GetVisArea());
+        const bool bVerticalWriting(pSdrOutliner->IsVertical());
+        const bool bTopToBottom(pSdrOutliner->IsTopToBottom());
+        const double fStartInX(bVerticalWriting && bTopToBottom
+                                   ? aOutArea.Right() - aVisArea.Left()
+                                   : aOutArea.Left() - aVisArea.Left());
+        const double fStartInY(bVerticalWriting && !bTopToBottom
+                                   ? aOutArea.Bottom() - aVisArea.Top()
+                                   : aOutArea.Top() - aVisArea.Top());
+
+        aNewTransformB.translate(fStartInX, fStartInY);
+
+        // get the current TextPrimitives. This is the most expensive part
+        // of this mechanism, it *may* be possible to buffer layouted
+        // primitives per ParaPortion with/in/dependent on the EditEngine
+        // content if needed. For now, get and compare
+        SdrTextObj::impDecomposeBlockTextPrimitiveDirect(
+            aNewTextPrimitives, *pSdrOutliner, aNewTransformA, aNewTransformB, aClipRange);
+
+        if (aNewTextPrimitives != maTextPrimitives)
+        {
+            maTextPrimitives = aNewTextPrimitives;
+            bObjectChange = true;
+        }
+    }
+
+    if (bObjectChange)
+    {
+        // if there really *was* a change signal the OverlayManager to
+        // refresh this object's visualization
+        objectChange();
+
+        // on data change, always do a SelectionChange, too
+        // since the selection is an integral part of text visualization
+        checkSelectionChange();
+    }
+}
+
+void TextEditOverlayObject::checkSelectionChange()
+{
+    if (getOverlaySelection() && getOverlayManager())
+    {
+        std::vector<tools::Rectangle> aLogicRects;
+        std::vector<basegfx::B2DRange> aLogicRanges;
+        const Size aLogicPixel(getOverlayManager()->getOutputDevice().PixelToLogic(Size(1, 1)));
+
+        // get logic selection
+        getOutlinerView().GetSelectionRectangles(aLogicRects);
+
+        aLogicRanges.reserve(aLogicRects.size());
+        for (const auto& aRect : aLogicRects)
+        {
+            // convert from logic Rectangles to logic Ranges, do not forget to add
+            // one Unit (in this case logical units for one pixel, pre-calculated)
+            aLogicRanges.emplace_back(
+                aRect.Left() - aLogicPixel.Width(), aRect.Top() - aLogicPixel.Height(),
+                aRect.Right() + aLogicPixel.Width(), aRect.Bottom() + aLogicPixel.Height());
+        }
+
+        mpOverlaySelection->setRanges(aLogicRanges);
+    }
+}
+} // end of anonymous namespace
+
+// TextEdit
+
+// callback from the active EditView, forward to evtl. existing instances of the
+// TextEditOverlayObject(s). This will additionally update the selection which
+// is an integral part of the text visualization
+void SdrObjEditView::EditViewInvalidate(const tools::Rectangle&)
+{
+    if (IsTextEdit())
+    {
+        // MinTextRange may have changed. Forward it, too
+        const basegfx::B2DRange aMinTextRange
+            = vcl::unotools::b2DRectangleFromRectangle(aMinTextEditArea);
+
+        for (sal_uInt32 a(0); a < maTEOverlayGroup.count(); a++)
+        {
+            TextEditOverlayObject* pCandidate
+                = dynamic_cast<TextEditOverlayObject*>(&maTEOverlayGroup.getOverlayObject(a));
+
+            if (pCandidate)
+            {
+                pCandidate->checkDataChange(aMinTextRange);
+            }
+        }
+    }
+}
+
+// callback from the active EditView, forward to evtl. existing instances of the
+// TextEditOverlayObject(s). This cvall *only* updates the selection visualization
+// which is e.g. used when only the selection is changed, but not the text
+void SdrObjEditView::EditViewSelectionChange()
+{
+    if (IsTextEdit())
+    {
+        for (sal_uInt32 a(0); a < maTEOverlayGroup.count(); a++)
+        {
+            TextEditOverlayObject* pCandidate
+                = dynamic_cast<TextEditOverlayObject*>(&maTEOverlayGroup.getOverlayObject(a));
+
+            if (pCandidate)
+            {
+                pCandidate->checkSelectionChange();
+            }
+        }
+    }
+}
+
+OutputDevice& SdrObjEditView::EditViewOutputDevice() const { return *pTextEditWin; }
+
+void SdrObjEditView::EditViewInputContext(const InputContext& rInputContext)
+{
+    if (!pTextEditWin)
+        return;
+    pTextEditWin->SetInputContext(rInputContext);
+}
+
+void SdrObjEditView::EditViewCursorRect(const tools::Rectangle& rRect, int nExtTextInputWidth)
+{
+    if (!pTextEditWin)
+        return;
+    pTextEditWin->SetCursorRect(&rRect, nExtTextInputWidth);
+}
+
+void SdrObjEditView::TextEditDrawing(SdrPaintWindow& rPaintWindow)
+{
+    if (!comphelper::LibreOfficeKit::isActive())
+    {
+        // adapt all TextEditOverlayObject(s), so call EditViewInvalidate()
+        // to update accordingly (will update selection, too). Suppress new
+        // stuff when LibreOfficeKit is active
+        EditViewInvalidate(tools::Rectangle());
+    }
+    else
+    {
+        // draw old text edit stuff
+        if (IsTextEdit())
+        {
+            const SdrOutliner* pActiveOutliner = GetTextEditOutliner();
+
+            if (pActiveOutliner)
+            {
+                const sal_uInt32 nViewCount(pActiveOutliner->GetViewCount());
+
+                if (nViewCount)
+                {
+                    const vcl::Region& rRedrawRegion = rPaintWindow.GetRedrawRegion();
+                    const tools::Rectangle aCheckRect(rRedrawRegion.GetBoundRect());
+
+                    for (sal_uInt32 i(0); i < nViewCount; i++)
+                    {
+                        OutlinerView* pOLV = pActiveOutliner->GetView(i);
+
+                        // If rPaintWindow knows that the output device is a render
+                        // context and is aware of the underlying vcl::Window,
+                        // compare against that; that's how double-buffering can
+                        // still find the matching OutlinerView.
+                        OutputDevice* pOutputDevice = rPaintWindow.GetWindow()
+                                                          ? rPaintWindow.GetWindow()
+                                                          : &rPaintWindow.GetOutputDevice();
+                        if (pOLV->GetWindow() == pOutputDevice
+                            || comphelper::LibreOfficeKit::isActive())
+                        {
+                            ImpPaintOutlinerView(*pOLV, aCheckRect,
+                                                 rPaintWindow.GetTargetOutputDevice());
+                            return;
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+void SdrObjEditView::ImpPaintOutlinerView(OutlinerView& rOutlView, const tools::Rectangle& rRect,
+                                          OutputDevice& rTargetDevice) const
+{
+    const SdrTextObj* pText = GetTextEditObject();
+    bool bTextFrame(pText && pText->IsTextFrame());
+    bool bFitToSize(pTextEditOutliner->GetControlWord() & EEControlBits::STRETCHING);
+    bool bModified(pTextEditOutliner->IsModified());
+    tools::Rectangle aBlankRect(rOutlView.GetOutputArea());
+    aBlankRect.Union(aMinTextEditArea);
+    tools::Rectangle aPixRect(rTargetDevice.LogicToPixel(aBlankRect));
+
+    // in the tiled rendering case, the setup is incomplete, and we very
+    // easily get an empty rRect on input - that will cause that everything is
+    // clipped; happens in case of editing text inside a shape in Calc.
+    // FIXME would be better to complete the setup so that we don't get an
+    // empty rRect here
+    if (!comphelper::LibreOfficeKit::isActive() || !rRect.IsEmpty())
+        aBlankRect.Intersection(rRect);
+
+    rOutlView.GetOutliner()->SetUpdateMode(true); // Bugfix #22596#
+    rOutlView.Paint(aBlankRect, &rTargetDevice);
+
+    if (!bModified)
+    {
+        pTextEditOutliner->ClearModifyFlag();
+    }
+
+    if (bTextFrame && !bFitToSize)
+    {
+        // completely reworked to use primitives; this ensures same look and functionality
+        const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+        std::unique_ptr<drawinglayer::processor2d::BaseProcessor2D> xProcessor(
+            drawinglayer::processor2d::createProcessor2DFromOutputDevice(rTargetDevice,
+                                                                         aViewInformation2D));
+
+        if (xProcessor)
+        {
+            const bool bMapModeEnabled(rTargetDevice.IsMapModeEnabled());
+            const basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(aPixRect);
+            const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+            const Color aHilightColor(aSvtOptionsDrawinglayer.getHilightColor());
+            const double fTransparence(aSvtOptionsDrawinglayer.GetTransparentSelectionPercent()
+                                       * 0.01);
+            const sal_uInt16 nPixSiz(rOutlView.GetInvalidateMore() - 1);
+            const drawinglayer::primitive2d::Primitive2DReference xReference(
+                new drawinglayer::primitive2d::OverlayRectanglePrimitive(
+                    aRange, aHilightColor.getBColor(), fTransparence,
+                    std::max(6, nPixSiz - 2), // grow
+                    0.0, // shrink
+                    0.0));
+            const drawinglayer::primitive2d::Primitive2DContainer aSequence{ xReference };
+
+            rTargetDevice.EnableMapMode(false);
+            xProcessor->process(aSequence);
+            rTargetDevice.EnableMapMode(bMapModeEnabled);
+        }
+    }
+
+    rOutlView.ShowCursor(/*bGotoCursor=*/true, /*bActivate=*/true);
+}
+
+void SdrObjEditView::ImpInvalidateOutlinerView(OutlinerView const& rOutlView) const
+{
+    vcl::Window* pWin = rOutlView.GetWindow();
+
+    if (pWin)
+    {
+        const SdrTextObj* pText = GetTextEditObject();
+        bool bTextFrame(pText && pText->IsTextFrame());
+        bool bFitToSize(pText && pText->IsFitToSize());
+
+        if (bTextFrame && !bFitToSize)
+        {
+            tools::Rectangle aBlankRect(rOutlView.GetOutputArea());
+            aBlankRect.Union(aMinTextEditArea);
+            tools::Rectangle aPixRect(pWin->LogicToPixel(aBlankRect));
+            sal_uInt16 nPixSiz(rOutlView.GetInvalidateMore() - 1);
+
+            aPixRect.AdjustLeft(-1);
+            aPixRect.AdjustTop(-1);
+            aPixRect.AdjustRight(1);
+            aPixRect.AdjustBottom(1);
+
+            {
+                // limit xPixRect because of driver problems when pixel coordinates are too far out
+                Size aMaxXY(pWin->GetOutputSizePixel());
+                long a(2 * nPixSiz);
+                long nMaxX(aMaxXY.Width() + a);
+                long nMaxY(aMaxXY.Height() + a);
+
+                if (aPixRect.Left() < -a)
+                    aPixRect.SetLeft(-a);
+                if (aPixRect.Top() < -a)
+                    aPixRect.SetTop(-a);
+                if (aPixRect.Right() > nMaxX)
+                    aPixRect.SetRight(nMaxX);
+                if (aPixRect.Bottom() > nMaxY)
+                    aPixRect.SetBottom(nMaxY);
+            }
+
+            tools::Rectangle aOuterPix(aPixRect);
+            aOuterPix.AdjustLeft(-nPixSiz);
+            aOuterPix.AdjustTop(-nPixSiz);
+            aOuterPix.AdjustRight(nPixSiz);
+            aOuterPix.AdjustBottom(nPixSiz);
+
+            bool bMapModeEnabled(pWin->IsMapModeEnabled());
+            pWin->EnableMapMode(false);
+            pWin->Invalidate(aOuterPix);
+            pWin->EnableMapMode(bMapModeEnabled);
+        }
+    }
+}
+
+OutlinerView* SdrObjEditView::ImpMakeOutlinerView(vcl::Window* pWin, OutlinerView* pGivenView,
+                                                  SfxViewShell* pViewShell) const
+{
+    // background
+    Color aBackground(GetTextEditBackgroundColor(*this));
+    SdrTextObj* pText = mxTextEditObj.get();
+    bool bTextFrame = pText != nullptr && pText->IsTextFrame();
+    bool bContourFrame = pText != nullptr && pText->IsContourTextFrame();
+    // create OutlinerView
+    OutlinerView* pOutlView = pGivenView;
+    pTextEditOutliner->SetUpdateMode(false);
+
+    if (pOutlView == nullptr)
+    {
+        pOutlView = new OutlinerView(pTextEditOutliner.get(), pWin);
+    }
+    else
+    {
+        pOutlView->SetWindow(pWin);
+    }
+
+    // disallow scrolling
+    EVControlBits nStat = pOutlView->GetControlWord();
+    nStat &= ~EVControlBits::AUTOSCROLL;
+    // AutoViewSize only if not ContourFrame.
+    if (!bContourFrame)
+        nStat |= EVControlBits::AUTOSIZE;
+    if (bTextFrame)
+    {
+        sal_uInt16 nPixSiz = maHdlList.GetHdlSize() * 2 + 1;
+        nStat |= EVControlBits::INVONEMORE;
+        pOutlView->SetInvalidateMore(nPixSiz);
+    }
+    pOutlView->SetControlWord(nStat);
+    pOutlView->SetBackgroundColor(aBackground);
+
+    // In case we're in the process of constructing a new view shell,
+    // SfxViewShell::Current() may still point to the old one. So if possible,
+    // depend on the application owning this draw view to provide the view
+    // shell.
+    SfxViewShell* pSfxViewShell = pViewShell ? pViewShell : GetSfxViewShell();
+    pOutlView->RegisterViewShell(pSfxViewShell ? pSfxViewShell : SfxViewShell::Current());
+
+    if (pText != nullptr)
+    {
+        pOutlView->SetAnchorMode(pText->GetOutlinerViewAnchorMode());
+        pTextEditOutliner->SetFixedCellHeight(
+            pText->GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT).GetValue());
+    }
+    // do update before setting output area so that aTextEditArea can be recalculated
+    pTextEditOutliner->SetUpdateMode(true);
+    pOutlView->SetOutputArea(aTextEditArea);
+    ImpInvalidateOutlinerView(*pOutlView);
+    return pOutlView;
+}
+
+IMPL_LINK(SdrObjEditView, ImpOutlinerStatusEventHdl, EditStatus&, rEditStat, void)
+{
+    if (pTextEditOutliner)
+    {
+        SdrTextObj* pTextObj = mxTextEditObj.get();
+        if (pTextObj)
+        {
+            pTextObj->onEditOutlinerStatusEvent(&rEditStat);
+        }
+    }
+}
+
+void SdrObjEditView::ImpChainingEventHdl()
+{
+    if (pTextEditOutliner)
+    {
+        SdrTextObj* pTextObj = mxTextEditObj.get();
+        OutlinerView* pOLV = GetTextEditOutlinerView();
+        if (pTextObj && pOLV)
+        {
+            TextChain* pTextChain = pTextObj->GetTextChain();
+
+            // XXX: IsChainable and GetNilChainingEvent are a bit mixed up atm
+            if (!pTextObj->IsChainable())
+            {
+                return;
+            }
+            // This is true during an underflow-caused overflow (with pEdtOutl->SetText())
+            if (pTextChain->GetNilChainingEvent(pTextObj))
+            {
+                return;
+            }
+
+            // We prevent to trigger further handling of overflow/underflow for pTextObj
+            pTextChain->SetNilChainingEvent(pTextObj, true); // XXX
+
+            // Save previous selection pos // NOTE: It must be done to have the right CursorEvent in KeyInput
+            pTextChain->SetPreChainingSel(pTextObj, pOLV->GetSelection());
+            //maPreChainingSel = new ESelection(pOLV->GetSelection());
+
+            // Handling Undo
+            const int nText = 0; // XXX: hardcoded index (SdrTextObj::getText handles only 0)
+
+            const bool bUndoEnabled = GetModel() && IsUndoEnabled();
+            std::unique_ptr<SdrUndoObjSetText> pTxtUndo;
+            if (bUndoEnabled)
+                pTxtUndo.reset(
+                    dynamic_cast<SdrUndoObjSetText*>(GetModel()
+                                                         ->GetSdrUndoFactory()
+                                                         .CreateUndoObjectSetText(*pTextObj, nText)
+                                                         .release()));
+
+            // trigger actual chaining
+            pTextObj->onChainingEvent();
+
+            if (pTxtUndo)
+            {
+                pTxtUndo->AfterSetText();
+                if (!pTxtUndo->IsDifferent())
+                {
+                    pTxtUndo.reset();
+                }
+            }
+
+            if (pTxtUndo)
+                AddUndo(std::move(pTxtUndo));
+
+            //maCursorEvent = new CursorChainingEvent(pTextChain->GetCursorEvent(pTextObj));
+            //SdrTextObj *pNextLink = pTextObj->GetNextLinkInChain();
+
+            // NOTE: Must be called. Don't let the function return if you set it to true and not reset it
+            pTextChain->SetNilChainingEvent(pTextObj, false);
+        }
+        else
+        {
+            // XXX
+            SAL_INFO("svx.chaining", "[OnChaining] No Edit Outliner View");
+        }
+    }
+}
+
+IMPL_LINK_NOARG(SdrObjEditView, ImpAfterCutOrPasteChainingEventHdl, LinkParamNone*, void)
+{
+    SdrTextObj* pTextObj = GetTextEditObject();
+    if (!pTextObj)
+        return;
+    ImpChainingEventHdl();
+    TextChainCursorManager aCursorManager(this, pTextObj);
+    ImpMoveCursorAfterChainingEvent(&aCursorManager);
+}
+
+void SdrObjEditView::ImpMoveCursorAfterChainingEvent(TextChainCursorManager* pCursorManager)
+{
+    if (!mxTextEditObj.is() || !pCursorManager)
+        return;
+
+    SdrTextObj* pTextObj = mxTextEditObj.get();
+
+    // Check if it has links to move it to
+    if (!pTextObj || !pTextObj->IsChainable())
+        return;
+
+    TextChain* pTextChain = pTextObj->GetTextChain();
+    ESelection aNewSel = pTextChain->GetPostChainingSel(pTextObj);
+
+    pCursorManager->HandleCursorEventAfterChaining(pTextChain->GetCursorEvent(pTextObj), aNewSel);
+
+    // Reset event
+    pTextChain->SetCursorEvent(pTextObj, CursorChainingEvent::NULL_EVENT);
+}
+
+IMPL_LINK(SdrObjEditView, ImpOutlinerCalcFieldValueHdl, EditFieldInfo*, pFI, void)
+{
+    bool bOk = false;
+    OUString& rStr = pFI->GetRepresentation();
+    rStr.clear();
+    SdrTextObj* pTextObj = mxTextEditObj.get();
+    if (pTextObj != nullptr)
+    {
+        std::optional<Color> pTxtCol;
+        std::optional<Color> pFldCol;
+        bOk = pTextObj->CalcFieldValue(pFI->GetField(), pFI->GetPara(), pFI->GetPos(), true,
+                                       pTxtCol, pFldCol, rStr);
+        if (bOk)
+        {
+            if (pTxtCol)
+            {
+                pFI->SetTextColor(*pTxtCol);
+            }
+            if (pFldCol)
+            {
+                pFI->SetFieldColor(*pFldCol);
+            }
+            else
+            {
+                pFI->SetFieldColor(COL_LIGHTGRAY); // TODO: remove this later on (357)
+            }
+        }
+    }
+    Outliner& rDrawOutl = mpModel->GetDrawOutliner(pTextObj);
+    Link<EditFieldInfo*, void> aDrawOutlLink = rDrawOutl.GetCalcFieldValueHdl();
+    if (!bOk && aDrawOutlLink.IsSet())
+    {
+        aDrawOutlLink.Call(pFI);
+        bOk = !rStr.isEmpty();
+    }
+    if (!bOk)
+    {
+        aOldCalcFieldValueLink.Call(pFI);
+    }
+}
+
+IMPL_LINK_NOARG(SdrObjEditView, EndTextEditHdl, SdrUndoManager*, void) { SdrEndTextEdit(); }
+
+SdrUndoManager* SdrObjEditView::getSdrUndoManagerForEnhancedTextEdit() const
+{
+    // default returns registered UndoManager
+    return GetModel() ? dynamic_cast<SdrUndoManager*>(GetModel()->GetSdrUndoManager()) : nullptr;
+}
+
+bool SdrObjEditView::SdrBeginTextEdit(SdrObject* pObj_, SdrPageView* pPV, vcl::Window* pWin,
+                                      bool bIsNewObj, SdrOutliner* pGivenOutliner,
+                                      OutlinerView* pGivenOutlinerView, bool bDontDeleteOutliner,
+                                      bool bOnlyOneView, bool bGrabFocus)
+{
+    // FIXME cannot be an assert() yet, the code is not ready for that;
+    // eg. press F7 in Impress when you are inside a text object with spelling
+    // mistakes => boom; and it is unclear how to avoid that
+    SAL_WARN_IF(IsTextEdit(), "svx", "SdrBeginTextEdit called when IsTextEdit() is already true.");
+    // FIXME this encourages all sorts of bad habits and should be removed
+    SdrEndTextEdit();
+
+    SdrTextObj* pObj = dynamic_cast<SdrTextObj*>(pObj_);
+    if (!pObj)
+        return false; // currently only possible with text objects
+
+    if (bGrabFocus && pWin)
+    {
+        // attention, this call may cause an EndTextEdit() call to this view
+        pWin->GrabFocus(); // to force the cursor into the edit view
+    }
+
+    bTextEditDontDelete = bDontDeleteOutliner && pGivenOutliner != nullptr;
+    bTextEditOnlyOneView = bOnlyOneView;
+    bTextEditNewObj = bIsNewObj;
+    const sal_uInt32 nWinCount(PaintWindowCount());
+    sal_uInt32 i;
+    bool bBrk(false);
+
+    if (!pWin)
+    {
+        for (i = 0; i < nWinCount && !pWin; i++)
+        {
+            SdrPaintWindow* pPaintWindow = GetPaintWindow(i);
+
+            if (OUTDEV_WINDOW == pPaintWindow->GetOutputDevice().GetOutDevType())
+            {
+                pWin = static_cast<vcl::Window*>(&pPaintWindow->GetOutputDevice());
+            }
+        }
+
+        // break, when no window exists
+        if (!pWin)
+        {
+            bBrk = true;
+        }
+    }
+
+    if (!bBrk && !pPV)
+    {
+        pPV = GetSdrPageView();
+
+        // break, when no PageView for the object exists
+        if (!pPV)
+        {
+            bBrk = true;
+        }
+    }
+
+    // no TextEdit on objects in locked Layer
+    if (pPV && pPV->GetLockedLayers().IsSet(pObj->GetLayer()))
+    {
+        bBrk = true;
+    }
+
+    if (pTextEditOutliner)
+    {
+        OSL_FAIL("SdrObjEditView::SdrBeginTextEdit(): Old Outliner still exists.");
+        pTextEditOutliner.reset();
+    }
+
+    if (!bBrk)
+    {
+        pTextEditWin = pWin;
+        pTextEditPV = pPV;
+        mxTextEditObj.reset(pObj);
+        if (pGivenOutliner)
+        {
+            pTextEditOutliner.reset(pGivenOutliner);
+            pGivenOutliner = nullptr; // so we don't delete it on the error path
+        }
+        else
+            pTextEditOutliner = SdrMakeOutliner(OutlinerMode::TextObject,
+                                                mxTextEditObj->getSdrModelFromSdrObject());
+
+        {
+            SvtAccessibilityOptions aOptions;
+            pTextEditOutliner->ForceAutoColor(aOptions.GetIsAutomaticFontColor());
+        }
+
+        aOldCalcFieldValueLink = pTextEditOutliner->GetCalcFieldValueHdl();
+        // FieldHdl has to be set by SdrBeginTextEdit, because this call an UpdateFields
+        pTextEditOutliner->SetCalcFieldValueHdl(
+            LINK(this, SdrObjEditView, ImpOutlinerCalcFieldValueHdl));
+        pTextEditOutliner->SetBeginPasteOrDropHdl(LINK(this, SdrObjEditView, BeginPasteOrDropHdl));
+        pTextEditOutliner->SetEndPasteOrDropHdl(LINK(this, SdrObjEditView, EndPasteOrDropHdl));
+
+        // It is just necessary to make the visualized page known. Set it.
+        pTextEditOutliner->setVisualizedPage(pPV->GetPage());
+
+        pTextEditOutliner->SetTextObjNoInit(mxTextEditObj.get());
+
+        if (mxTextEditObj->BegTextEdit(*pTextEditOutliner))
+        {
+            SdrTextObj* pTextObj = mxTextEditObj.get();
+            DBG_ASSERT(pTextObj, "svx::SdrObjEditView::BegTextEdit(), no text object?");
+            if (!pTextObj)
+                return false;
+
+            // switch off any running TextAnimations
+            pTextObj->SetTextAnimationAllowed(false);
+
+            // remember old cursor
+            if (pTextEditOutliner->GetViewCount() != 0)
+            {
+                pTextEditOutliner->RemoveView(static_cast<size_t>(0));
+            }
+
+            // Determine EditArea via TakeTextEditArea.
+            // TODO: This could theoretically be left out, because TakeTextRect() calculates the aTextEditArea,
+            // but aMinTextEditArea has to happen, too (therefore leaving this in right now)
+            pTextObj->TakeTextEditArea(nullptr, nullptr, &aTextEditArea, &aMinTextEditArea);
+
+            tools::Rectangle aTextRect;
+            tools::Rectangle aAnchorRect;
+            pTextObj->TakeTextRect(*pTextEditOutliner, aTextRect, true,
+                                   &aAnchorRect /* Give true here, not false */);
+
+            if (!pTextObj->IsContourTextFrame())
+            {
+                // FitToSize not together with ContourFrame, for now
+                if (pTextObj->IsFitToSize())
+                    aTextRect = aAnchorRect;
+            }
+
+            aTextEditArea = aTextRect;
+
+            // add possible GridOffset to up-to-now view-independent EditAreas
+            basegfx::B2DVector aGridOffset(0.0, 0.0);
+            if (getPossibleGridOffsetForSdrObject(aGridOffset, pTextObj, pPV))
+            {
+                const Point aOffset(basegfx::fround(aGridOffset.getX()),
+                                    basegfx::fround(aGridOffset.getY()));
+
+                aTextEditArea += aOffset;
+                aMinTextEditArea += aOffset;
+            }
+
+            Point aPvOfs(pTextObj->GetTextEditOffset());
+            aTextEditArea.Move(aPvOfs.X(), aPvOfs.Y());
+            aMinTextEditArea.Move(aPvOfs.X(), aPvOfs.Y());
+            pTextEditCursorBuffer = pWin->GetCursor();
+
+            maHdlList.SetMoveOutside(true);
+
+            // Since IsMarkHdlWhenTextEdit() is ignored, it is necessary
+            // to call AdjustMarkHdl() always.
+            AdjustMarkHdl();
+
+            pTextEditOutlinerView = ImpMakeOutlinerView(pWin, pGivenOutlinerView);
+
+            if (!comphelper::LibreOfficeKit::isActive() && pTextEditOutlinerView)
+            {
+                // activate visualization of EditView on Overlay, suppress when
+                // LibreOfficeKit is active
+                pTextEditOutlinerView->GetEditView().setEditViewCallbacks(this);
+
+                const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+                const Color aHilightColor(aSvtOptionsDrawinglayer.getHilightColor());
+                const SdrTextObj* pText = GetTextEditObject();
+                const bool bTextFrame(pText && pText->IsTextFrame());
+                const bool bFitToSize(pTextEditOutliner->GetControlWord()
+                                      & EEControlBits::STRETCHING);
+                const bool bVisualizeSurroundingFrame(bTextFrame && !bFitToSize);
+                SdrPageView* pPageView = GetSdrPageView();
+
+                if (pPageView)
+                {
+                    for (sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                    {
+                        const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                        if (rPageWindow.GetPaintWindow().OutputToWindow())
+                        {
+                            const rtl::Reference<sdr::overlay::OverlayManager>& xManager
+                                = rPageWindow.GetOverlayManager();
+                            if (xManager.is())
+                            {
+                                std::unique_ptr<TextEditOverlayObject> pNewTextEditOverlayObject(
+                                    new TextEditOverlayObject(aHilightColor, *pTextEditOutlinerView,
+                                                              bVisualizeSurroundingFrame));
+
+                                xManager->add(*pNewTextEditOverlayObject);
+                                xManager->add(const_cast<sdr::overlay::OverlaySelection&>(
+                                    *pNewTextEditOverlayObject->getOverlaySelection()));
+
+                                maTEOverlayGroup.append(std::move(pNewTextEditOverlayObject));
+                            }
+                        }
+                    }
+                }
+            }
+
+            // check if this view is already inserted
+            size_t i2, nCount = pTextEditOutliner->GetViewCount();
+            for (i2 = 0; i2 < nCount; i2++)
+            {
+                if (pTextEditOutliner->GetView(i2) == pTextEditOutlinerView)
+                    break;
+            }
+
+            if (i2 == nCount)
+                pTextEditOutliner->InsertView(pTextEditOutlinerView, 0);
+
+            maHdlList.SetMoveOutside(false);
+            maHdlList.SetMoveOutside(true);
+
+            // register all windows as OutlinerViews with the Outliner
+            if (!bOnlyOneView)
+            {
+                for (i = 0; i < nWinCount; i++)
+                {
+                    SdrPaintWindow* pPaintWindow = GetPaintWindow(i);
+                    OutputDevice& rOutDev = pPaintWindow->GetOutputDevice();
+
+                    if (&rOutDev != pWin && OUTDEV_WINDOW == rOutDev.GetOutDevType())
+                    {
+                        OutlinerView* pOutlView
+                            = ImpMakeOutlinerView(static_cast<vcl::Window*>(&rOutDev), nullptr);
+                        pTextEditOutliner->InsertView(pOutlView, static_cast<sal_uInt16>(i));
+                    }
+                }
+
+                if (comphelper::LibreOfficeKit::isActive())
+                {
+                    // Register an outliner view for all other sdr views that
+                    // show the same page, so that when the text edit changes,
+                    // all interested windows get an invalidation.
+                    SdrViewIter aIter(pObj->getSdrPageFromSdrObject());
+                    for (SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView())
+                    {
+                        if (pView == this)
+                            continue;
+
+                        for (sal_uInt32 nViewPaintWindow = 0;
+                             nViewPaintWindow < pView->PaintWindowCount(); ++nViewPaintWindow)
+                        {
+                            SdrPaintWindow* pPaintWindow = pView->GetPaintWindow(nViewPaintWindow);
+                            OutputDevice& rOutDev = pPaintWindow->GetOutputDevice();
+
+                            if (&rOutDev != pWin && OUTDEV_WINDOW == rOutDev.GetOutDevType())
+                            {
+                                OutlinerView* pOutlView = ImpMakeOutlinerView(
+                                    static_cast<vcl::Window*>(&rOutDev), nullptr);
+                                pOutlView->HideCursor();
+                                static_cast<vcl::Window*>(&rOutDev)->SetCursor(nullptr);
+                                pTextEditOutliner->InsertView(pOutlView);
+                            }
+                        }
+                    }
+                }
+            }
+
+            pTextEditOutlinerView->ShowCursor();
+            pTextEditOutliner->SetStatusEventHdl(
+                LINK(this, SdrObjEditView, ImpOutlinerStatusEventHdl));
+            if (pTextObj->IsChainable())
+            {
+                pTextEditOutlinerView->SetEndCutPasteLinkHdl(
+                    LINK(this, SdrObjEditView, ImpAfterCutOrPasteChainingEventHdl));
+            }
+
+            pTextEditOutliner->ClearModifyFlag();
+
+            if (pTextObj->IsFitToSize())
+            {
+                pWin->Invalidate(aTextEditArea);
+            }
+
+            if (GetModel())
+            {
+                SdrHint aHint(SdrHintKind::BeginEdit, *pTextObj);
+                GetModel()->Broadcast(aHint);
+            }
+
+            pTextEditOutliner->setVisualizedPage(nullptr);
+
+            if (mxSelectionController.is())
+                mxSelectionController->onSelectionHasChanged();
+
+            if (GetModel() && IsUndoEnabled()
+                && !GetModel()->GetDisableTextEditUsesCommonUndoManager())
+            {
+                SdrUndoManager* pSdrUndoManager = getSdrUndoManagerForEnhancedTextEdit();
+
+                if (pSdrUndoManager)
+                {
+                    // we have an outliner, undo manager and it's an EditUndoManager, exchange
+                    // the document undo manager and the default one from the outliner and tell
+                    // it that text edit starts by setting a callback if it needs to end text edit mode.
+                    assert(nullptr == mpOldTextEditUndoManager);
+
+                    mpOldTextEditUndoManager = pTextEditOutliner->SetUndoManager(pSdrUndoManager);
+                    pSdrUndoManager->SetEndTextEditHdl(LINK(this, SdrObjEditView, EndTextEditHdl));
+                }
+                else
+                {
+                    OSL_ENSURE(false,
+                               "The document undo manager is not derived from SdrUndoManager (!)");
+                }
+            }
+
+            return true; // ran fine, let TextEdit run now
+        }
+        else
+        {
+            pTextEditOutliner->SetCalcFieldValueHdl(aOldCalcFieldValueLink);
+            pTextEditOutliner->SetBeginPasteOrDropHdl(Link<PasteOrDropInfos*, void>());
+            pTextEditOutliner->SetEndPasteOrDropHdl(Link<PasteOrDropInfos*, void>());
+        }
+    }
+    if (pTextEditOutliner != nullptr)
+    {
+        pTextEditOutliner->setVisualizedPage(nullptr);
+    }
+
+    // something went wrong...
+    if (!bDontDeleteOutliner)
+    {
+        delete pGivenOutliner;
+        if (pGivenOutlinerView != nullptr)
+        {
+            delete pGivenOutlinerView;
+            pGivenOutlinerView = nullptr;
+        }
+    }
+    pTextEditOutliner.reset();
+
+    pTextEditOutlinerView = nullptr;
+    mxTextEditObj.reset(nullptr);
+    pTextEditPV = nullptr;
+    pTextEditWin = nullptr;
+    maHdlList.SetMoveOutside(false);
+
+    return false;
+}
+
+SdrEndTextEditKind SdrObjEditView::SdrEndTextEdit(bool bDontDeleteReally)
+{
+    SdrEndTextEditKind eRet = SdrEndTextEditKind::Unchanged;
+    SdrTextObj* pTEObj = mxTextEditObj.get();
+    vcl::Window* pTEWin = pTextEditWin;
+    OutlinerView* pTEOutlinerView = pTextEditOutlinerView;
+    vcl::Cursor* pTECursorBuffer = pTextEditCursorBuffer;
+    SdrUndoManager* pUndoEditUndoManager = nullptr;
+    bool bNeedToUndoSavedRedoTextEdit(false);
+
+    if (GetModel() && IsUndoEnabled() && pTEObj && pTextEditOutliner
+        && !GetModel()->GetDisableTextEditUsesCommonUndoManager())
+    {
+        // change back the UndoManager to the remembered original one
+        SfxUndoManager* pOriginal = pTextEditOutliner->SetUndoManager(mpOldTextEditUndoManager);
+        mpOldTextEditUndoManager = nullptr;
+
+        if (pOriginal)
+        {
+            // check if we got back our document undo manager
+            SdrUndoManager* pSdrUndoManager = getSdrUndoManagerForEnhancedTextEdit();
+
+            if (pSdrUndoManager && dynamic_cast<SdrUndoManager*>(pOriginal) == pSdrUndoManager)
+            {
+                if (pSdrUndoManager->isEndTextEditTriggeredFromUndo())
+                {
+                    // remember the UndoManager where missing Undos have to be triggered after end
+                    // text edit. When the undo had triggered the end text edit, the original action
+                    // which had to be undone originally is not yet undone.
+                    pUndoEditUndoManager = pSdrUndoManager;
+
+                    // We are ending text edit; if text edit was triggered from undo, execute all redos
+                    // to create a complete text change undo action for the redo buffer. Also mark this
+                    // state when at least one redo was executed; the created extra TextChange needs to
+                    // be undone in addition to the first real undo outside the text edit changes
+                    while (pSdrUndoManager->GetRedoActionCount())
+                    {
+                        bNeedToUndoSavedRedoTextEdit = true;
+                        pSdrUndoManager->Redo();
+                    }
+                }
+
+                // reset the callback link and let the undo manager cleanup all text edit
+                // undo actions to get the stack back to the form before the text edit
+                pSdrUndoManager->SetEndTextEditHdl(Link<SdrUndoManager*, void>());
+            }
+            else
+            {
+                OSL_ENSURE(false, "Got UndoManager back in SdrEndTextEdit which is NOT the "
+                                  "expected document UndoManager (!)");
+                delete pOriginal;
+            }
+        }
+    }
+    else
+    {
+        assert(nullptr == mpOldTextEditUndoManager); // cannot be restored!
+    }
+
+    if (GetModel() && mxTextEditObj.is())
+    {
+        SdrHint aHint(SdrHintKind::EndEdit, *mxTextEditObj);
+        GetModel()->Broadcast(aHint);
+    }
+
+    // if new mechanism was used, clean it up. At cleanup no need to check
+    // for LibreOfficeKit
+    if (pTextEditOutlinerView)
+    {
+        pTextEditOutlinerView->GetEditView().setEditViewCallbacks(nullptr);
+        maTEOverlayGroup.clear();
+    }
+
+    mxTextEditObj.reset(nullptr);
+    pTextEditPV = nullptr;
+    pTextEditWin = nullptr;
+    SdrOutliner* pTEOutliner = pTextEditOutliner.release();
+    pTextEditOutlinerView = nullptr;
+    pTextEditCursorBuffer = nullptr;
+    aTextEditArea = tools::Rectangle();
+
+    if (pTEOutliner != nullptr)
+    {
+        bool bModified = pTEOutliner->IsModified();
+        if (pTEOutlinerView != nullptr)
+        {
+            pTEOutlinerView->HideCursor();
+        }
+        if (pTEObj != nullptr)
+        {
+            pTEOutliner->CompleteOnlineSpelling();
+
+            std::unique_ptr<SdrUndoObjSetText> pTxtUndo;
+
+            if (bModified)
+            {
+                sal_Int32 nText;
+                for (nText = 0; nText < pTEObj->getTextCount(); ++nText)
+                    if (pTEObj->getText(nText) == pTEObj->getActiveText())
+                        break;
+
+                pTxtUndo.reset(
+                    dynamic_cast<SdrUndoObjSetText*>(GetModel()
+                                                         ->GetSdrUndoFactory()
+                                                         .CreateUndoObjectSetText(*pTEObj, nText)
+                                                         .release()));
+            }
+            DBG_ASSERT(!bModified || pTxtUndo,
+                       "svx::SdrObjEditView::EndTextEdit(), could not create undo action!");
+            // Set old CalcFieldValue-Handler again, this
+            // has to happen before Obj::EndTextEdit(), as this does UpdateFields().
+            pTEOutliner->SetCalcFieldValueHdl(aOldCalcFieldValueLink);
+            pTEOutliner->SetBeginPasteOrDropHdl(Link<PasteOrDropInfos*, void>());
+            pTEOutliner->SetEndPasteOrDropHdl(Link<PasteOrDropInfos*, void>());
+
+            const bool bUndo = IsUndoEnabled();
+            if (bUndo)
+            {
+                EndTextEditAllViews();
+                OUString aObjName(pTEObj->TakeObjNameSingul());
+                BegUndo(SvxResId(STR_UndoObjSetText), aObjName);
+            }
+
+            pTEObj->EndTextEdit(*pTEOutliner);
+
+            if ((pTEObj->GetRotateAngle() != 0)
+                || (dynamic_cast<const SdrTextObj*>(pTEObj) != nullptr && pTEObj->IsFontwork()))
+            {
+                pTEObj->ActionChanged();
+            }
+
+            if (pTxtUndo != nullptr)
+            {
+                pTxtUndo->AfterSetText();
+                if (!pTxtUndo->IsDifferent())
+                {
+                    pTxtUndo.reset();
+                }
+            }
+            // check deletion of entire TextObj
+            std::unique_ptr<SdrUndoAction> pDelUndo;
+            bool bDelObj = false;
+            if (bTextEditNewObj)
+            {
+                bDelObj = pTEObj->IsTextFrame() && !pTEObj->HasText() && !pTEObj->IsEmptyPresObj()
+                          && !pTEObj->HasFill() && !pTEObj->HasLine();
+
+                if (pTEObj->IsInserted() && bDelObj
+                    && pTEObj->GetObjInventor() == SdrInventor::Default && !bDontDeleteReally)
+                {
+                    SdrObjKind eIdent = static_cast<SdrObjKind>(pTEObj->GetObjIdentifier());
+                    if (eIdent == OBJ_TEXT)
+                    {
+                        pDelUndo = GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pTEObj);
+                    }
+                }
+            }
+            if (pTxtUndo)
+            {
+                if (bUndo)
+                    AddUndo(std::move(pTxtUndo));
+                eRet = SdrEndTextEditKind::Changed;
+            }
+            if (pDelUndo != nullptr)
+            {
+                if (bUndo)
+                {
+                    AddUndo(std::move(pDelUndo));
+                }
+                eRet = SdrEndTextEditKind::Deleted;
+                DBG_ASSERT(pTEObj->getParentSdrObjListFromSdrObject() != nullptr,
+                           "SdrObjEditView::SdrEndTextEdit(): Fatal: Object edited doesn't have an "
+                           "ObjList!");
+                if (pTEObj->getParentSdrObjListFromSdrObject() != nullptr)
+                {
+                    pTEObj->getParentSdrObjListFromSdrObject()->RemoveObject(pTEObj->GetOrdNum());
+                    CheckMarked(); // remove selection immediately...
+                }
+            }
+            else if (bDelObj)
+            { // for Writer: the app has to do the deletion itself.
+                eRet = SdrEndTextEditKind::ShouldBeDeleted;
+            }
+
+            if (bUndo)
+                EndUndo(); // EndUndo after Remove, in case UndoStack is deleted immediately
+
+            // Switch on any TextAnimation again after TextEdit
+            if (dynamic_cast<const SdrTextObj*>(pTEObj) != nullptr)
+            {
+                pTEObj->SetTextAnimationAllowed(true);
+            }
+
+            // Since IsMarkHdlWhenTextEdit() is ignored, it is necessary
+            // to call AdjustMarkHdl() always.
+            AdjustMarkHdl();
+        }
+        // delete all OutlinerViews
+        for (size_t i = pTEOutliner->GetViewCount(); i > 0;)
+        {
+            i--;
+            OutlinerView* pOLV = pTEOutliner->GetView(i);
+            sal_uInt16 nMorePix = pOLV->GetInvalidateMore() + 10;
+            vcl::Window* pWin = pOLV->GetWindow();
+            tools::Rectangle aRect(pOLV->GetOutputArea());
+            pTEOutliner->RemoveView(i);
+            if (!bTextEditDontDelete || i != 0)
+            {
+                // may not own the zeroth one
+                delete pOLV;
+            }
+            aRect.Union(aTextEditArea);
+            aRect.Union(aMinTextEditArea);
+            aRect = pWin->LogicToPixel(aRect);
+            aRect.AdjustLeft(-nMorePix);
+            aRect.AdjustTop(-nMorePix);
+            aRect.AdjustRight(nMorePix);
+            aRect.AdjustBottom(nMorePix);
+            aRect = pWin->PixelToLogic(aRect);
+            InvalidateOneWin(*pWin, aRect);
+            pWin->SetFillColor();
+            pWin->SetLineColor(COL_BLACK);
+        }
+        // and now the Outliner itself
+        if (!bTextEditDontDelete)
+            delete pTEOutliner;
+        else
+            pTEOutliner->Clear();
+        if (pTEWin != nullptr)
+        {
+            pTEWin->SetCursor(pTECursorBuffer);
+        }
+        maHdlList.SetMoveOutside(false);
+        if (eRet != SdrEndTextEditKind::Unchanged)
+        {
+            GetMarkedObjectListWriteAccess().SetNameDirty();
+        }
+    }
+
+    if (pTEObj && !pTEObj->getSdrModelFromSdrObject().isLocked() && pTEObj->GetBroadcaster())
+    {
+        SdrHint aHint(SdrHintKind::EndEdit, *pTEObj);
+        const_cast<SfxBroadcaster*>(pTEObj->GetBroadcaster())->Broadcast(aHint);
+    }
+
+    if (pUndoEditUndoManager)
+    {
+        if (bNeedToUndoSavedRedoTextEdit)
+        {
+            // undo the text edit action since it was created as part of an EndTextEdit
+            // callback from undo itself. This needs to be done after the call to
+            // FmFormView::SdrEndTextEdit since it gets created there
+            pUndoEditUndoManager->Undo();
+        }
+
+        // trigger the Undo which was not executed, but lead to this
+        // end text edit
+        pUndoEditUndoManager->Undo();
+    }
+
+    return eRet;
+}
+
+// info about TextEdit. Default is false.
+bool SdrObjEditView::IsTextEdit() const { return mxTextEditObj.is(); }
+
+// info about TextEditPageView. Default is 0L.
+SdrPageView* SdrObjEditView::GetTextEditPageView() const { return pTextEditPV; }
+
+OutlinerView* SdrObjEditView::ImpFindOutlinerView(vcl::Window const* pWin) const
+{
+    if (pWin == nullptr)
+        return nullptr;
+    if (pTextEditOutliner == nullptr)
+        return nullptr;
+    OutlinerView* pNewView = nullptr;
+    size_t nWinCount = pTextEditOutliner->GetViewCount();
+    for (size_t i = 0; i < nWinCount && pNewView == nullptr; i++)
+    {
+        OutlinerView* pView = pTextEditOutliner->GetView(i);
+        if (pView->GetWindow() == pWin)
+            pNewView = pView;
+    }
+    return pNewView;
+}
+
+void SdrObjEditView::SetTextEditWin(vcl::Window* pWin)
+{
+    if (mxTextEditObj.is() && pWin != nullptr && pWin != pTextEditWin)
+    {
+        OutlinerView* pNewView = ImpFindOutlinerView(pWin);
+        if (pNewView != nullptr && pNewView != pTextEditOutlinerView)
+        {
+            if (pTextEditOutlinerView != nullptr)
+            {
+                pTextEditOutlinerView->HideCursor();
+            }
+            pTextEditOutlinerView = pNewView;
+            pTextEditWin = pWin;
+            pWin->GrabFocus(); // Make the cursor blink here as well
+            pNewView->ShowCursor();
+            ImpMakeTextCursorAreaVisible();
+        }
+    }
+}
+
+bool SdrObjEditView::IsTextEditHit(const Point& rHit) const
+{
+    bool bOk = false;
+    if (mxTextEditObj.is())
+    {
+        tools::Rectangle aEditArea;
+        OutlinerView* pOLV = pTextEditOutliner->GetView(0);
+        if (pOLV != nullptr)
+        {
+            aEditArea.Union(pOLV->GetOutputArea());
+        }
+        bOk = aEditArea.IsInside(rHit);
+        if (bOk)
+        { // check if any characters were actually hit
+            Point aPnt(rHit);
+            aPnt -= aEditArea.TopLeft();
+            long nHitTol = 2000;
+            OutputDevice* pRef = pTextEditOutliner->GetRefDevice();
+            if (pRef)
+                nHitTol = OutputDevice::LogicToLogic(nHitTol, MapUnit::Map100thMM,
+                                                     pRef->GetMapMode().GetMapUnit());
+
+            bOk = pTextEditOutliner->IsTextPos(aPnt, static_cast<sal_uInt16>(nHitTol));
+        }
+    }
+    return bOk;
+}
+
+bool SdrObjEditView::IsTextEditFrameHit(const Point& rHit) const
+{
+    bool bOk = false;
+    if (mxTextEditObj.is())
+    {
+        SdrTextObj* pText = mxTextEditObj.get();
+        OutlinerView* pOLV = pTextEditOutliner->GetView(0);
+        if (pOLV)
+        {
+            vcl::Window* pWin = pOLV->GetWindow();
+            if (pText != nullptr && pText->IsTextFrame() && pWin != nullptr)
+            {
+                sal_uInt16 nPixSiz = pOLV->GetInvalidateMore();
+                tools::Rectangle aEditArea(aMinTextEditArea);
+                aEditArea.Union(pOLV->GetOutputArea());
+                if (!aEditArea.IsInside(rHit))
+                {
+                    Size aSiz(pWin->PixelToLogic(Size(nPixSiz, nPixSiz)));
+                    aEditArea.AdjustLeft(-(aSiz.Width()));
+                    aEditArea.AdjustTop(-(aSiz.Height()));
+                    aEditArea.AdjustRight(aSiz.Width());
+                    aEditArea.AdjustBottom(aSiz.Height());
+                    bOk = aEditArea.IsInside(rHit);
+                }
+            }
+        }
+    }
+    return bOk;
+}
+
+TextChainCursorManager* SdrObjEditView::ImpHandleMotionThroughBoxesKeyInput(const KeyEvent& rKEvt,
+                                                                            bool* bOutHandled)
+{
+    *bOutHandled = false;
+
+    SdrTextObj* pTextObj = mxTextEditObj.get();
+    if (!pTextObj)
+        return nullptr;
+
+    if (!pTextObj->GetNextLinkInChain() && !pTextObj->GetPrevLinkInChain())
+        return nullptr;
+
+    TextChainCursorManager* pCursorManager = new TextChainCursorManager(this, pTextObj);
+    if (pCursorManager->HandleKeyEvent(rKEvt))
+    {
+        // Possibly do other stuff here if necessary...
+        // XXX: Careful with the checks below (in KeyInput) for pWin and co. You should do them here I guess.
+        *bOutHandled = true;
+    }
+
+    return pCursorManager;
+}
+
+bool SdrObjEditView::KeyInput(const KeyEvent& rKEvt, vcl::Window* pWin)
+{
+    if (pTextEditOutlinerView)
+    {
+        /* Start special handling of keys within a chain */
+        // We possibly move to another box before any handling
+        bool bHandled = false;
+        std::unique_ptr<TextChainCursorManager> xCursorManager(
+            ImpHandleMotionThroughBoxesKeyInput(rKEvt, &bHandled));
+        if (bHandled)
+            return true;
+        /* End special handling of keys within a chain */
+
+        if (pTextEditOutlinerView->PostKeyEvent(rKEvt, pWin))
+        {
+            if (mpModel)
+            {
+                if (pTextEditOutliner && pTextEditOutliner->IsModified())
+                    mpModel->SetChanged();
+            }
+
+            /* Start chaining processing */
+            ImpChainingEventHdl();
+            ImpMoveCursorAfterChainingEvent(xCursorManager.get());
+            /* End chaining processing */
+
+            if (pWin != nullptr && pWin != pTextEditWin)
+                SetTextEditWin(pWin);
+            ImpMakeTextCursorAreaVisible();
+            return true;
+        }
+    }
+    return SdrGlueEditView::KeyInput(rKEvt, pWin);
+}
+
+bool SdrObjEditView::MouseButtonDown(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    if (pTextEditOutlinerView != nullptr)
+    {
+        bool bPostIt = pTextEditOutliner->IsInSelectionMode();
+        if (!bPostIt)
+        {
+            Point aPt(rMEvt.GetPosPixel());
+            if (pWin != nullptr)
+                aPt = pWin->PixelToLogic(aPt);
+            else if (pTextEditWin != nullptr)
+                aPt = pTextEditWin->PixelToLogic(aPt);
+            bPostIt = IsTextEditHit(aPt);
+        }
+        if (bPostIt)
+        {
+            Point aPixPos(rMEvt.GetPosPixel());
+            if (pWin)
+            {
+                tools::Rectangle aR(pWin->LogicToPixel(pTextEditOutlinerView->GetOutputArea()));
+                if (aPixPos.X() < aR.Left())
+                    aPixPos.setX(aR.Left());
+                if (aPixPos.X() > aR.Right())
+                    aPixPos.setX(aR.Right());
+                if (aPixPos.Y() < aR.Top())
+                    aPixPos.setY(aR.Top());
+                if (aPixPos.Y() > aR.Bottom())
+                    aPixPos.setY(aR.Bottom());
+            }
+            MouseEvent aMEvt(aPixPos, rMEvt.GetClicks(), rMEvt.GetMode(), rMEvt.GetButtons(),
+                             rMEvt.GetModifier());
+            if (pTextEditOutlinerView->MouseButtonDown(aMEvt))
+            {
+                if (pWin != nullptr && pWin != pTextEditWin
+                    && pWin->GetOutDevType() == OUTDEV_WINDOW)
+                    SetTextEditWin(static_cast<vcl::Window*>(pWin));
+                ImpMakeTextCursorAreaVisible();
+                return true;
+            }
+        }
+    }
+    return SdrGlueEditView::MouseButtonDown(rMEvt, pWin);
+}
+
+bool SdrObjEditView::MouseButtonUp(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    if (pTextEditOutlinerView != nullptr)
+    {
+        bool bPostIt = pTextEditOutliner->IsInSelectionMode();
+        if (!bPostIt)
+        {
+            Point aPt(rMEvt.GetPosPixel());
+            if (pWin != nullptr)
+                aPt = pWin->PixelToLogic(aPt);
+            else if (pTextEditWin != nullptr)
+                aPt = pTextEditWin->PixelToLogic(aPt);
+            bPostIt = IsTextEditHit(aPt);
+        }
+        if (bPostIt && pWin)
+        {
+            Point aPixPos(rMEvt.GetPosPixel());
+            tools::Rectangle aR(pWin->LogicToPixel(pTextEditOutlinerView->GetOutputArea()));
+            if (aPixPos.X() < aR.Left())
+                aPixPos.setX(aR.Left());
+            if (aPixPos.X() > aR.Right())
+                aPixPos.setX(aR.Right());
+            if (aPixPos.Y() < aR.Top())
+                aPixPos.setY(aR.Top());
+            if (aPixPos.Y() > aR.Bottom())
+                aPixPos.setY(aR.Bottom());
+            MouseEvent aMEvt(aPixPos, rMEvt.GetClicks(), rMEvt.GetMode(), rMEvt.GetButtons(),
+                             rMEvt.GetModifier());
+            if (pTextEditOutlinerView->MouseButtonUp(aMEvt))
+            {
+                ImpMakeTextCursorAreaVisible();
+                return true;
+            }
+        }
+    }
+    return SdrGlueEditView::MouseButtonUp(rMEvt, pWin);
+}
+
+bool SdrObjEditView::MouseMove(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    if (pTextEditOutlinerView != nullptr)
+    {
+        bool bSelMode = pTextEditOutliner->IsInSelectionMode();
+        bool bPostIt = bSelMode;
+        if (!bPostIt)
+        {
+            Point aPt(rMEvt.GetPosPixel());
+            if (pWin)
+                aPt = pWin->PixelToLogic(aPt);
+            else if (pTextEditWin)
+                aPt = pTextEditWin->PixelToLogic(aPt);
+            bPostIt = IsTextEditHit(aPt);
+        }
+        if (bPostIt)
+        {
+            Point aPixPos(rMEvt.GetPosPixel());
+            tools::Rectangle aR(pTextEditOutlinerView->GetOutputArea());
+            if (pWin)
+                aR = pWin->LogicToPixel(aR);
+            else if (pTextEditWin)
+                aR = pTextEditWin->LogicToPixel(aR);
+            if (aPixPos.X() < aR.Left())
+                aPixPos.setX(aR.Left());
+            if (aPixPos.X() > aR.Right())
+                aPixPos.setX(aR.Right());
+            if (aPixPos.Y() < aR.Top())
+                aPixPos.setY(aR.Top());
+            if (aPixPos.Y() > aR.Bottom())
+                aPixPos.setY(aR.Bottom());
+            MouseEvent aMEvt(aPixPos, rMEvt.GetClicks(), rMEvt.GetMode(), rMEvt.GetButtons(),
+                             rMEvt.GetModifier());
+            if (pTextEditOutlinerView->MouseMove(aMEvt) && bSelMode)
+            {
+                ImpMakeTextCursorAreaVisible();
+                return true;
+            }
+        }
+    }
+    return SdrGlueEditView::MouseMove(rMEvt, pWin);
+}
+
+bool SdrObjEditView::Command(const CommandEvent& rCEvt, vcl::Window* pWin)
+{
+    // as long as OutlinerView returns a sal_Bool, it only gets CommandEventId::StartDrag
+    if (pTextEditOutlinerView != nullptr)
+    {
+        if (rCEvt.GetCommand() == CommandEventId::StartDrag)
+        {
+            bool bPostIt = pTextEditOutliner->IsInSelectionMode() || !rCEvt.IsMouseEvent();
+            if (!bPostIt && rCEvt.IsMouseEvent())
+            {
+                Point aPt(rCEvt.GetMousePosPixel());
+                if (pWin != nullptr)
+                    aPt = pWin->PixelToLogic(aPt);
+                else if (pTextEditWin != nullptr)
+                    aPt = pTextEditWin->PixelToLogic(aPt);
+                bPostIt = IsTextEditHit(aPt);
+            }
+            if (bPostIt)
+            {
+                Point aPixPos(rCEvt.GetMousePosPixel());
+                if (rCEvt.IsMouseEvent() && pWin)
+                {
+                    tools::Rectangle aR(pWin->LogicToPixel(pTextEditOutlinerView->GetOutputArea()));
+                    if (aPixPos.X() < aR.Left())
+                        aPixPos.setX(aR.Left());
+                    if (aPixPos.X() > aR.Right())
+                        aPixPos.setX(aR.Right());
+                    if (aPixPos.Y() < aR.Top())
+                        aPixPos.setY(aR.Top());
+                    if (aPixPos.Y() > aR.Bottom())
+                        aPixPos.setY(aR.Bottom());
+                }
+                CommandEvent aCEvt(aPixPos, rCEvt.GetCommand(), rCEvt.IsMouseEvent());
+                // Command is void at the OutlinerView, sadly
+                pTextEditOutlinerView->Command(aCEvt);
+                if (pWin != nullptr && pWin != pTextEditWin)
+                    SetTextEditWin(pWin);
+                ImpMakeTextCursorAreaVisible();
+                return true;
+            }
+        }
+        else
+        {
+            pTextEditOutlinerView->Command(rCEvt);
+            return true;
+        }
+    }
+    return SdrGlueEditView::Command(rCEvt, pWin);
+}
+
+bool SdrObjEditView::ImpIsTextEditAllSelected() const
+{
+    bool bRet = false;
+    if (pTextEditOutliner != nullptr && pTextEditOutlinerView != nullptr)
+    {
+        if (SdrTextObj::HasTextImpl(pTextEditOutliner.get()))
+        {
+            const sal_Int32 nParaCnt = pTextEditOutliner->GetParagraphCount();
+            Paragraph* pLastPara = pTextEditOutliner->GetParagraph(nParaCnt > 1 ? nParaCnt - 1 : 0);
+
+            ESelection aESel(pTextEditOutlinerView->GetSelection());
+            if (aESel.nStartPara == 0 && aESel.nStartPos == 0 && aESel.nEndPara == (nParaCnt - 1))
+            {
+                if (pTextEditOutliner->GetText(pLastPara).getLength() == aESel.nEndPos)
+                    bRet = true;
+            }
+            // in case the selection was done backwards
+            if (!bRet && aESel.nEndPara == 0 && aESel.nEndPos == 0
+                && aESel.nStartPara == (nParaCnt - 1))
+            {
+                if (pTextEditOutliner->GetText(pLastPara).getLength() == aESel.nStartPos)
+                    bRet = true;
+            }
+        }
+        else
+        {
+            bRet = true;
+        }
+    }
+    return bRet;
+}
+
+void SdrObjEditView::ImpMakeTextCursorAreaVisible()
+{
+    if (pTextEditOutlinerView != nullptr && pTextEditWin != nullptr)
+    {
+        vcl::Cursor* pCsr = pTextEditWin->GetCursor();
+        if (pCsr != nullptr)
+        {
+            Size aSiz(pCsr->GetSize());
+            if (!aSiz.IsEmpty())
+            {
+                MakeVisible(tools::Rectangle(pCsr->GetPos(), aSiz), *pTextEditWin);
+            }
+        }
+    }
+}
+
+SvtScriptType SdrObjEditView::GetScriptType() const
+{
+    SvtScriptType nScriptType = SvtScriptType::NONE;
+
+    if (IsTextEdit())
+    {
+        if (mxTextEditObj->GetOutlinerParaObject())
+            nScriptType = mxTextEditObj->GetOutlinerParaObject()->GetTextObject().GetScriptType();
+
+        if (pTextEditOutlinerView)
+            nScriptType = pTextEditOutlinerView->GetSelectedScriptType();
+    }
+    else
+    {
+        const size_t nMarkCount(GetMarkedObjectCount());
+
+        for (size_t i = 0; i < nMarkCount; ++i)
+        {
+            OutlinerParaObject* pParaObj = GetMarkedObjectByIndex(i)->GetOutlinerParaObject();
+
+            if (pParaObj)
+            {
+                nScriptType |= pParaObj->GetTextObject().GetScriptType();
+            }
+        }
+    }
+
+    if (nScriptType == SvtScriptType::NONE)
+        nScriptType = SvtScriptType::LATIN;
+
+    return nScriptType;
+}
+
+void SdrObjEditView::GetAttributes(SfxItemSet& rTargetSet, bool bOnlyHardAttr) const
+{
+    if (mxSelectionController.is())
+        if (mxSelectionController->GetAttributes(rTargetSet, bOnlyHardAttr))
+            return;
+
+    if (IsTextEdit())
+    {
+        DBG_ASSERT(pTextEditOutlinerView != nullptr,
+                   "SdrObjEditView::GetAttributes(): pTextEditOutlinerView=NULL");
+        DBG_ASSERT(pTextEditOutliner != nullptr,
+                   "SdrObjEditView::GetAttributes(): pTextEditOutliner=NULL");
+
+        // take care of bOnlyHardAttr(!)
+        if (!bOnlyHardAttr && mxTextEditObj->GetStyleSheet())
+            rTargetSet.Put(mxTextEditObj->GetStyleSheet()->GetItemSet());
+
+        // add object attributes
+        rTargetSet.Put(mxTextEditObj->GetMergedItemSet());
+
+        if (pTextEditOutlinerView)
+        {
+            // FALSE= regard InvalidItems as "holes," not as Default
+            rTargetSet.Put(pTextEditOutlinerView->GetAttribs(), false);
+        }
+
+        if (GetMarkedObjectCount() == 1 && GetMarkedObjectByIndex(0) == mxTextEditObj.get())
+        {
+            MergeNotPersistAttrFromMarked(rTargetSet);
+        }
+    }
+    else
+    {
+        SdrGlueEditView::GetAttributes(rTargetSet, bOnlyHardAttr);
+    }
+}
+
+bool SdrObjEditView::SetAttributes(const SfxItemSet& rSet, bool bReplaceAll)
+{
+    bool bRet = false;
+    bool bTextEdit = pTextEditOutlinerView != nullptr && mxTextEditObj.is();
+    bool bAllTextSelected = ImpIsTextEditAllSelected();
+    const SfxItemSet* pSet = &rSet;
+
+    if (!bTextEdit)
+    {
+        // no TextEdit active -> all Items to drawing object
+        if (mxSelectionController.is())
+            bRet = mxSelectionController->SetAttributes(*pSet, bReplaceAll);
+
+        if (!bRet)
+        {
+            SdrGlueEditView::SetAttributes(*pSet, bReplaceAll);
+            bRet = true;
+        }
+    }
+    else
+    {
+#ifdef DBG_UTIL
+        {
+            bool bHasEEFeatureItems = false;
+            SfxItemIter aIter(rSet);
+            for (const SfxPoolItem* pItem = aIter.GetCurItem(); !bHasEEFeatureItems && pItem;
+                 pItem = aIter.NextItem())
+            {
+                if (!IsInvalidItem(pItem))
+                {
+                    sal_uInt16 nW = pItem->Which();
+                    if (nW >= EE_FEATURE_START && nW <= EE_FEATURE_END)
+                        bHasEEFeatureItems = true;
+                }
+            }
+
+            if (bHasEEFeatureItems)
+            {
+                const OUString aMessage("SdrObjEditView::SetAttributes(): Setting EE_FEATURE items "
+                                        "at the SdrView does not make sense! It only leads to "
+                                        "overhead and unreadable documents.");
+                std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(
+                    nullptr, VclMessageType::Info, VclButtonsType::Ok, aMessage));
+                xInfoBox->run();
+            }
+        }
+#endif
+
+        bool bOnlyEEItems;
+        bool bNoEEItems = !SearchOutlinerItems(*pSet, bReplaceAll, &bOnlyEEItems);
+        // everything selected? -> attributes to the border, too
+        // if no EEItems, attributes to the border only
+        if (bAllTextSelected || bNoEEItems)
+        {
+            if (mxSelectionController.is())
+                bRet = mxSelectionController->SetAttributes(*pSet, bReplaceAll);
+
+            if (!bRet)
+            {
+                const bool bUndo = IsUndoEnabled();
+
+                if (bUndo)
+                {
+                    BegUndo(ImpGetDescriptionString(STR_EditSetAttributes));
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*mxTextEditObj));
+
+                    // If this is a text object also rescue the OutlinerParaObject since
+                    // applying attributes to the object may change text layout when
+                    // multiple portions exist with multiple formats. If an OutlinerParaObject
+                    // really exists and needs to be rescued is evaluated in the undo
+                    // implementation itself.
+                    bool bRescueText = mxTextEditObj;
+
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(
+                        *mxTextEditObj, false, !bNoEEItems || bRescueText));
+                    EndUndo();
+                }
+
+                mxTextEditObj->SetMergedItemSetAndBroadcast(*pSet, bReplaceAll);
+
+                FlushComeBackTimer(); // to set ModeHasChanged immediately
+            }
+        }
+        else if (!bOnlyEEItems)
+        {
+            // Otherwise split Set, if necessary.
+            // Now we build an ItemSet aSet that doesn't contain EE_Items from
+            // *pSet (otherwise it would be a copy).
+            std::unique_ptr<sal_uInt16[]> pNewWhichTable
+                = RemoveWhichRange(pSet->GetRanges(), EE_ITEMS_START, EE_ITEMS_END);
+            SfxItemSet aSet(mpModel->GetItemPool(), pNewWhichTable.get());
+            pNewWhichTable.reset();
+            SfxWhichIter aIter(aSet);
+            sal_uInt16 nWhich = aIter.FirstWhich();
+            while (nWhich != 0)
+            {
+                const SfxPoolItem* pItem;
+                SfxItemState eState = pSet->GetItemState(nWhich, false, &pItem);
+                if (eState == SfxItemState::SET)
+                    aSet.Put(*pItem);
+                nWhich = aIter.NextWhich();
+            }
+
+            if (mxSelectionController.is())
+                bRet = mxSelectionController->SetAttributes(aSet, bReplaceAll);
+
+            if (!bRet)
+            {
+                if (IsUndoEnabled())
+                {
+                    BegUndo(ImpGetDescriptionString(STR_EditSetAttributes));
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*mxTextEditObj));
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*mxTextEditObj));
+                    EndUndo();
+                }
+
+                mxTextEditObj->SetMergedItemSetAndBroadcast(aSet, bReplaceAll);
+
+                if (GetMarkedObjectCount() == 1 && GetMarkedObjectByIndex(0) == mxTextEditObj.get())
+                {
+                    SetNotPersistAttrToMarked(aSet);
+                }
+            }
+            FlushComeBackTimer();
+        }
+        if (!bNoEEItems)
+        {
+            // and now the attributes to the EditEngine
+            if (bReplaceAll)
+            {
+                pTextEditOutlinerView->RemoveAttribs(true);
+            }
+            pTextEditOutlinerView->SetAttribs(rSet);
+
+            Outliner* pTEOutliner = pTextEditOutlinerView->GetOutliner();
+            if (mpModel && pTEOutliner && pTEOutliner->IsModified())
+                mpModel->SetChanged();
+
+            ImpMakeTextCursorAreaVisible();
+        }
+        bRet = true;
+    }
+    return bRet;
+}
+
+SfxStyleSheet* SdrObjEditView::GetStyleSheet() const
+{
+    SfxStyleSheet* pSheet = nullptr;
+
+    if (mxSelectionController.is())
+    {
+        if (mxSelectionController->GetStyleSheet(pSheet))
+            return pSheet;
+    }
+
+    if (pTextEditOutlinerView)
+    {
+        pSheet = pTextEditOutlinerView->GetStyleSheet();
+    }
+    else
+    {
+        pSheet = SdrGlueEditView::GetStyleSheet();
+    }
+    return pSheet;
+}
+
+void SdrObjEditView::SetStyleSheet(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    if (mxSelectionController.is())
+    {
+        if (mxSelectionController->SetStyleSheet(pStyleSheet, bDontRemoveHardAttr))
+            return;
+    }
+
+    // if we are currently in edit mode we must also set the stylesheet
+    // on all paragraphs in the Outliner for the edit view
+    if (nullptr != pTextEditOutlinerView)
+    {
+        Outliner* pOutliner = pTextEditOutlinerView->GetOutliner();
+
+        const sal_Int32 nParaCount = pOutliner->GetParagraphCount();
+        for (sal_Int32 nPara = 0; nPara < nParaCount; nPara++)
+        {
+            pOutliner->SetStyleSheet(nPara, pStyleSheet);
+        }
+    }
+
+    SdrGlueEditView::SetStyleSheet(pStyleSheet, bDontRemoveHardAttr);
+}
+
+void SdrObjEditView::AddWindowToPaintView(OutputDevice* pNewWin, vcl::Window* pWindow)
+{
+    SdrGlueEditView::AddWindowToPaintView(pNewWin, pWindow);
+
+    if (mxTextEditObj.is() && !bTextEditOnlyOneView && pNewWin->GetOutDevType() == OUTDEV_WINDOW)
+    {
+        OutlinerView* pOutlView = ImpMakeOutlinerView(static_cast<vcl::Window*>(pNewWin), nullptr);
+        pTextEditOutliner->InsertView(pOutlView);
+    }
+}
+
+void SdrObjEditView::DeleteWindowFromPaintView(OutputDevice* pOldWin)
+{
+    SdrGlueEditView::DeleteWindowFromPaintView(pOldWin);
+
+    if (mxTextEditObj.is() && !bTextEditOnlyOneView && pOldWin->GetOutDevType() == OUTDEV_WINDOW)
+    {
+        for (size_t i = pTextEditOutliner->GetViewCount(); i > 0;)
+        {
+            i--;
+            OutlinerView* pOLV = pTextEditOutliner->GetView(i);
+            if (pOLV && pOLV->GetWindow() == static_cast<vcl::Window*>(pOldWin))
+            {
+                pTextEditOutliner->RemoveView(i);
+            }
+        }
+    }
+
+    lcl_RemoveTextEditOutlinerViews(this, GetSdrPageView(), pOldWin);
+}
+
+bool SdrObjEditView::IsTextEditInSelectionMode() const
+{
+    return pTextEditOutliner != nullptr && pTextEditOutliner->IsInSelectionMode();
+}
+
+// MacroMode
+
+void SdrObjEditView::BegMacroObj(const Point& rPnt, short nTol, SdrObject* pObj, SdrPageView* pPV,
+                                 vcl::Window* pWin)
+{
+    BrkMacroObj();
+    if (pObj != nullptr && pPV != nullptr && pWin != nullptr && pObj->HasMacro())
+    {
+        nTol = ImpGetHitTolLogic(nTol, nullptr);
+        pMacroObj = pObj;
+        pMacroPV = pPV;
+        pMacroWin = pWin;
+        bMacroDown = false;
+        nMacroTol = sal_uInt16(nTol);
+        aMacroDownPos = rPnt;
+        MovMacroObj(rPnt);
+    }
+}
+
+void SdrObjEditView::ImpMacroUp(const Point& rUpPos)
+{
+    if (pMacroObj != nullptr && bMacroDown)
+    {
+        SdrObjMacroHitRec aHitRec;
+        aHitRec.aPos = rUpPos;
+        aHitRec.nTol = nMacroTol;
+        aHitRec.pVisiLayer = &pMacroPV->GetVisibleLayers();
+        aHitRec.pPageView = pMacroPV;
+        pMacroObj->PaintMacro(*pMacroWin, tools::Rectangle(), aHitRec);
+        bMacroDown = false;
+    }
+}
+
+void SdrObjEditView::ImpMacroDown(const Point& rDownPos)
+{
+    if (pMacroObj != nullptr && !bMacroDown)
+    {
+        SdrObjMacroHitRec aHitRec;
+        aHitRec.aPos = rDownPos;
+        aHitRec.nTol = nMacroTol;
+        aHitRec.pVisiLayer = &pMacroPV->GetVisibleLayers();
+        aHitRec.pPageView = pMacroPV;
+        pMacroObj->PaintMacro(*pMacroWin, tools::Rectangle(), aHitRec);
+        bMacroDown = true;
+    }
+}
+
+void SdrObjEditView::MovMacroObj(const Point& rPnt)
+{
+    if (pMacroObj != nullptr)
+    {
+        SdrObjMacroHitRec aHitRec;
+        aHitRec.aPos = rPnt;
+        aHitRec.nTol = nMacroTol;
+        aHitRec.pVisiLayer = &pMacroPV->GetVisibleLayers();
+        aHitRec.pPageView = pMacroPV;
+        bool bDown = pMacroObj->IsMacroHit(aHitRec);
+        if (bDown)
+            ImpMacroDown(rPnt);
+        else
+            ImpMacroUp(rPnt);
+    }
+}
+
+void SdrObjEditView::BrkMacroObj()
+{
+    if (pMacroObj != nullptr)
+    {
+        ImpMacroUp(aMacroDownPos);
+        pMacroObj = nullptr;
+        pMacroPV = nullptr;
+        pMacroWin = nullptr;
+    }
+}
+
+bool SdrObjEditView::EndMacroObj()
+{
+    if (pMacroObj != nullptr && bMacroDown)
+    {
+        ImpMacroUp(aMacroDownPos);
+        SdrObjMacroHitRec aHitRec;
+        aHitRec.aPos = aMacroDownPos;
+        aHitRec.nTol = nMacroTol;
+        aHitRec.pVisiLayer = &pMacroPV->GetVisibleLayers();
+        aHitRec.pPageView = pMacroPV;
+        bool bRet = pMacroObj->DoMacro(aHitRec);
+        pMacroObj = nullptr;
+        pMacroPV = nullptr;
+        pMacroWin = nullptr;
+        return bRet;
+    }
+    else
+    {
+        BrkMacroObj();
+        return false;
+    }
+}
+
+/** fills the given any with a XTextCursor for the current text selection.
+    Leaves the any untouched if there currently is no text selected */
+void SdrObjEditView::getTextSelection(css::uno::Any& rSelection)
+{
+    if (IsTextEdit())
+    {
+        OutlinerView* pOutlinerView = GetTextEditOutlinerView();
+        if (pOutlinerView && pOutlinerView->HasSelection())
+        {
+            SdrObject* pObj = GetTextEditObject();
+
+            if (pObj)
+            {
+                css::uno::Reference<css::text::XText> xText(pObj->getUnoShape(),
+                                                            css::uno::UNO_QUERY);
+                if (xText.is())
+                {
+                    SvxUnoTextBase* pRange
+                        = comphelper::getUnoTunnelImplementation<SvxUnoTextBase>(xText);
+                    if (pRange)
+                    {
+                        rSelection
+                            <<= pRange->createTextCursorBySelection(pOutlinerView->GetSelection());
+                    }
+                }
+            }
+        }
+    }
+}
+
+/* check if we have a single selection and that single object likes
+    to handle the mouse and keyboard events itself
+
+    TODO: the selection controller should be queried from the
+    object specific view contact. Currently this method only
+    works for tables.
+*/
+void SdrObjEditView::MarkListHasChanged()
+{
+    SdrGlueEditView::MarkListHasChanged();
+
+    if (mxSelectionController.is())
+    {
+        mxLastSelectionController = mxSelectionController;
+        mxSelectionController->onSelectionHasChanged();
+    }
+
+    mxSelectionController.clear();
+
+    const SdrMarkList& rMarkList = GetMarkedObjectList();
+    if (rMarkList.GetMarkCount() == 1)
+    {
+        const SdrObject* pObj(rMarkList.GetMark(0)->GetMarkedSdrObj());
+        SdrView* pView(dynamic_cast<SdrView*>(this));
+
+        // check for table
+        if (pObj && pView && (pObj->GetObjInventor() == SdrInventor::Default)
+            && (pObj->GetObjIdentifier() == OBJ_TABLE))
+        {
+            mxSelectionController = sdr::table::CreateTableController(
+                *pView, static_cast<const sdr::table::SdrTableObj&>(*pObj),
+                mxLastSelectionController);
+
+            if (mxSelectionController.is())
+            {
+                mxLastSelectionController.clear();
+                mxSelectionController->onSelectionHasChanged();
+            }
+        }
+    }
+}
+
+IMPL_LINK(SdrObjEditView, EndPasteOrDropHdl, PasteOrDropInfos*, pInfo, void)
+{
+    OnEndPasteOrDrop(pInfo);
+}
+
+IMPL_LINK(SdrObjEditView, BeginPasteOrDropHdl, PasteOrDropInfos*, pInfo, void)
+{
+    OnBeginPasteOrDrop(pInfo);
+}
+
+void SdrObjEditView::OnBeginPasteOrDrop(PasteOrDropInfos*)
+{
+    // applications can derive from these virtual methods to do something before a drop or paste operation
+}
+
+void SdrObjEditView::OnEndPasteOrDrop(PasteOrDropInfos*)
+{
+    // applications can derive from these virtual methods to do something before a drop or paste operation
+}
+
+sal_uInt16 SdrObjEditView::GetSelectionLevel() const
+{
+    sal_uInt16 nLevel = 0xFFFF;
+    if (IsTextEdit())
+    {
+        DBG_ASSERT(pTextEditOutlinerView != nullptr,
+                   "SdrObjEditView::GetAttributes(): pTextEditOutlinerView=NULL");
+        DBG_ASSERT(pTextEditOutliner != nullptr,
+                   "SdrObjEditView::GetAttributes(): pTextEditOutliner=NULL");
+        if (pTextEditOutlinerView)
+        {
+            //start and end position
+            ESelection aSelect = pTextEditOutlinerView->GetSelection();
+            sal_uInt16 nStartPara = ::std::min(aSelect.nStartPara, aSelect.nEndPara);
+            sal_uInt16 nEndPara = ::std::max(aSelect.nStartPara, aSelect.nEndPara);
+            //get level from each paragraph
+            nLevel = 0;
+            for (sal_uInt16 nPara = nStartPara; nPara <= nEndPara; nPara++)
+            {
+                sal_uInt16 nParaDepth
+                    = 1 << static_cast<sal_uInt16>(pTextEditOutliner->GetDepth(nPara));
+                if (!(nLevel & nParaDepth))
+                    nLevel += nParaDepth;
+            }
+            //reduce one level for Outliner Object
+            //if( nLevel > 0 && GetTextEditObject()->GetObjIdentifier() == OBJ_OUTLINETEXT )
+            //  nLevel = nLevel >> 1;
+            //no bullet paragraph selected
+            if (nLevel == 0)
+                nLevel = 0xFFFF;
+        }
+    }
+    return nLevel;
+}
+
+bool SdrObjEditView::SupportsFormatPaintbrush(SdrInventor nObjectInventor,
+                                              sal_uInt16 nObjectIdentifier)
+{
+    if (nObjectInventor != SdrInventor::Default && nObjectInventor != SdrInventor::E3d)
+        return false;
+    switch (nObjectIdentifier)
+    {
+        case OBJ_NONE:
+        case OBJ_GRUP:
+            return false;
+        case OBJ_LINE:
+        case OBJ_RECT:
+        case OBJ_CIRC:
+        case OBJ_SECT:
+        case OBJ_CARC:
+        case OBJ_CCUT:
+        case OBJ_POLY:
+        case OBJ_PLIN:
+        case OBJ_PATHLINE:
+        case OBJ_PATHFILL:
+        case OBJ_FREELINE:
+        case OBJ_FREEFILL:
+        case OBJ_SPLNLINE:
+        case OBJ_SPLNFILL:
+        case OBJ_TEXT:
+        case OBJ_TITLETEXT:
+        case OBJ_OUTLINETEXT:
+        case OBJ_GRAF:
+        case OBJ_OLE2:
+        case OBJ_TABLE:
+            return true;
+        case OBJ_EDGE:
+        case OBJ_CAPTION:
+            return false;
+        case OBJ_PATHPOLY:
+        case OBJ_PATHPLIN:
+            return true;
+        case OBJ_PAGE:
+        case OBJ_MEASURE:
+        case OBJ_FRAME:
+        case OBJ_UNO:
+            return false;
+        case OBJ_CUSTOMSHAPE:
+            return true;
+        default:
+            return false;
+    }
+}
+
+static const sal_uInt16* GetFormatRangeImpl(bool bTextOnly)
+{
+    static const sal_uInt16 gRanges[] = { SDRATTR_SHADOW_FIRST,
+                                          SDRATTR_SHADOW_LAST,
+                                          SDRATTR_GRAF_FIRST,
+                                          SDRATTR_GRAF_LAST,
+                                          SDRATTR_TABLE_FIRST,
+                                          SDRATTR_TABLE_LAST,
+                                          XATTR_LINE_FIRST,
+                                          XATTR_LINE_LAST,
+                                          XATTR_FILL_FIRST,
+                                          XATTRSET_FILL,
+                                          EE_PARA_START,
+                                          EE_PARA_END, // text-only from here on
+                                          EE_CHAR_START,
+                                          EE_CHAR_END,
+                                          SDRATTR_MISC_FIRST,
+                                          SDRATTR_MISC_LAST, // table cell formats
+                                          0,
+                                          0 };
+    return &gRanges[bTextOnly ? 10 : 0];
+}
+
+void SdrObjEditView::TakeFormatPaintBrush(std::shared_ptr<SfxItemSet>& rFormatSet)
+{
+    const SdrMarkList& rMarkList = GetMarkedObjectList();
+    if (rMarkList.GetMarkCount() > 0)
+    {
+        OutlinerView* pOLV = GetTextEditOutlinerView();
+
+        rFormatSet = std::make_shared<SfxItemSet>(GetModel()->GetItemPool(),
+                                                  GetFormatRangeImpl(pOLV != nullptr));
+        if (pOLV)
+        {
+            rFormatSet->Put(pOLV->GetAttribs());
+        }
+        else
+        {
+            const bool bOnlyHardAttr = false;
+            rFormatSet->Put(GetAttrFromMarked(bOnlyHardAttr));
+        }
+
+        // check for cloning from table cell, in which case we need to copy cell-specific formatting attributes
+        const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+        if (pObj && (pObj->GetObjInventor() == SdrInventor::Default)
+            && (pObj->GetObjIdentifier() == OBJ_TABLE))
+        {
+            auto pTable = static_cast<const sdr::table::SdrTableObj*>(pObj);
+            if (mxSelectionController.is() && pTable->getActiveCell().is())
+            {
+                mxSelectionController->GetAttributes(*rFormatSet, false);
+            }
+        }
+    }
+}
+
+static SfxItemSet CreatePaintSet(const sal_uInt16* pRanges, SfxItemPool& rPool,
+                                 const SfxItemSet& rSourceSet, const SfxItemSet& rTargetSet,
+                                 bool bNoCharacterFormats, bool bNoParagraphFormats)
+{
+    SfxItemSet aPaintSet(rPool, pRanges);
+
+    while (*pRanges)
+    {
+        sal_uInt16 nWhich = *pRanges++;
+        const sal_uInt16 nLastWhich = *pRanges++;
+
+        if (bNoCharacterFormats && (nWhich == EE_CHAR_START))
+            continue;
+
+        if (bNoParagraphFormats && (nWhich == EE_PARA_START))
+            continue;
+
+        for (; nWhich < nLastWhich; nWhich++)
+        {
+            const SfxPoolItem* pSourceItem = rSourceSet.GetItem(nWhich);
+            const SfxPoolItem* pTargetItem = rTargetSet.GetItem(nWhich);
+
+            if ((pSourceItem && !pTargetItem)
+                || (pSourceItem && pTargetItem && *pSourceItem != *pTargetItem))
+            {
+                aPaintSet.Put(*pSourceItem);
+            }
+        }
+    }
+    return aPaintSet;
+}
+
+void SdrObjEditView::ApplyFormatPaintBrushToText(SfxItemSet const& rFormatSet, SdrTextObj& rTextObj,
+                                                 SdrText* pText, bool bNoCharacterFormats,
+                                                 bool bNoParagraphFormats)
+{
+    OutlinerParaObject* pParaObj = pText ? pText->GetOutlinerParaObject() : nullptr;
+    if (pParaObj)
+    {
+        SdrOutliner& rOutliner = rTextObj.ImpGetDrawOutliner();
+        rOutliner.SetText(*pParaObj);
+
+        sal_Int32 nParaCount(rOutliner.GetParagraphCount());
+
+        if (nParaCount)
+        {
+            for (sal_Int32 nPara = 0; nPara < nParaCount; nPara++)
+            {
+                if (!bNoCharacterFormats)
+                    rOutliner.RemoveCharAttribs(nPara);
+
+                SfxItemSet aSet(rOutliner.GetParaAttribs(nPara));
+                aSet.Put(CreatePaintSet(GetFormatRangeImpl(true), *aSet.GetPool(), rFormatSet, aSet,
+                                        bNoCharacterFormats, bNoParagraphFormats));
+                rOutliner.SetParaAttribs(nPara, aSet);
+            }
+
+            std::unique_ptr<OutlinerParaObject> pTemp = rOutliner.CreateParaObject(0, nParaCount);
+            rOutliner.Clear();
+
+            rTextObj.NbcSetOutlinerParaObjectForText(std::move(pTemp), pText);
+        }
+    }
+}
+
+void SdrObjEditView::ApplyFormatPaintBrush(SfxItemSet& rFormatSet, bool bNoCharacterFormats,
+                                           bool bNoParagraphFormats)
+{
+    if (mxSelectionController.is()
+        && mxSelectionController->ApplyFormatPaintBrush(rFormatSet, bNoCharacterFormats,
+                                                        bNoParagraphFormats))
+    {
+        return;
+    }
+
+    OutlinerView* pOLV = GetTextEditOutlinerView();
+    const SdrMarkList& rMarkList = GetMarkedObjectList();
+    if (!pOLV)
+    {
+        SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+        const SfxItemSet& rShapeSet = pObj->GetMergedItemSet();
+
+        // if not in text edit mode (aka the user selected text or clicked on a word)
+        // apply formatting attributes to selected shape
+        // All formatting items (see ranges above) that are unequal in selected shape and
+        // the format paintbrush are hard set on the selected shape.
+
+        const sal_uInt16* pRanges = rFormatSet.GetRanges();
+        bool bTextOnly = true;
+
+        while (*pRanges)
+        {
+            if ((*pRanges != EE_PARA_START) && (*pRanges != EE_CHAR_START))
+            {
+                bTextOnly = false;
+                break;
+            }
+            pRanges += 2;
+        }
+
+        if (!bTextOnly)
+        {
+            SfxItemSet aPaintSet(CreatePaintSet(GetFormatRangeImpl(false), *rShapeSet.GetPool(),
+                                                rFormatSet, rShapeSet, bNoCharacterFormats,
+                                                bNoParagraphFormats));
+            SetAttrToMarked(aPaintSet, false /*bReplaceAll*/);
+        }
+
+        // now apply character and paragraph formatting to text, if the shape has any
+        SdrTextObj* pTextObj = dynamic_cast<SdrTextObj*>(pObj);
+        if (pTextObj)
+        {
+            sal_Int32 nText = pTextObj->getTextCount();
+
+            while (--nText >= 0)
+            {
+                SdrText* pText = pTextObj->getText(nText);
+                ApplyFormatPaintBrushToText(rFormatSet, *pTextObj, pText, bNoCharacterFormats,
+                                            bNoParagraphFormats);
+            }
+        }
+    }
+    else
+    {
+        ::Outliner* pOutliner = pOLV->GetOutliner();
+        if (pOutliner)
+        {
+            const EditEngine& rEditEngine = pOutliner->GetEditEngine();
+
+            ESelection aSel(pOLV->GetSelection());
+            if (!aSel.HasRange())
+                pOLV->SetSelection(rEditEngine.GetWord(aSel, css::i18n::WordType::DICTIONARY_WORD));
+
+            const bool bRemoveParaAttribs = !bNoParagraphFormats;
+            pOLV->RemoveAttribsKeepLanguages(bRemoveParaAttribs);
+            SfxItemSet aSet(pOLV->GetAttribs());
+            SfxItemSet aPaintSet(CreatePaintSet(GetFormatRangeImpl(true), *aSet.GetPool(),
+                                                rFormatSet, aSet, bNoCharacterFormats,
+                                                bNoParagraphFormats));
+            pOLV->SetAttribs(aPaintSet);
+        }
+    }
+
+    // check for cloning to table cell, in which case we need to copy cell-specific formatting attributes
+    SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+    if (pObj && (pObj->GetObjInventor() == SdrInventor::Default)
+        && (pObj->GetObjIdentifier() == OBJ_TABLE))
+    {
+        auto pTable = static_cast<sdr::table::SdrTableObj*>(pObj);
+        if (pTable->getActiveCell().is() && mxSelectionController.is())
+        {
+            mxSelectionController->SetAttributes(rFormatSet, false);
+        }
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdetc.cxx b/svx/source/svdraw/svdetc.cxx
new file mode 100644
index 000000000..0d82f6632
--- /dev/null
+++ b/svx/source/svdraw/svdetc.cxx
@@ -0,0 +1,748 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <officecfg/Office/Common.hxx>
+#include <svtools/colorcfg.hxx>
+#include <svx/svdetc.hxx>
+#include <svx/svdedxv.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdoutl.hxx>
+#include <vcl/bitmapaccess.hxx>
+#include <editeng/eeitem.hxx>
+#include <svl/itemset.hxx>
+#include <svl/whiter.hxx>
+#include <svx/xgrad.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xflhtit.hxx>
+#include <svx/xbtmpit.hxx>
+#include <svx/xflgrit.hxx>
+#include <svx/svdoole2.hxx>
+#include <svl/itempool.hxx>
+#include <tools/debug.hxx>
+#include <unotools/configmgr.hxx>
+#include <unotools/localedatawrapper.hxx>
+#include <unotools/syslocale.hxx>
+#include <svx/xflbckit.hxx>
+#include <svx/extrusionbar.hxx>
+#include <svx/fontworkbar.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/settings.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdotable.hxx>
+#include <svx/sdrhittesthelper.hxx>
+
+#include <com/sun/star/frame/XModel.hpp>
+#include <com/sun/star/embed/XEmbeddedObject.hpp>
+
+using namespace ::com::sun::star;
+
+// Global data of the DrawingEngine
+SdrGlobalData::SdrGlobalData()
+    : pSysLocale(nullptr)
+    , pLocaleData(nullptr)
+{
+    if (!utl::ConfigManager::IsFuzzing())
+    {
+        svx::ExtrusionBar::RegisterInterface();
+        svx::FontworkBar::RegisterInterface();
+    }
+}
+
+const SvtSysLocale*         SdrGlobalData::GetSysLocale()
+{
+    if ( !pSysLocale )
+        pSysLocale = new SvtSysLocale;
+    return pSysLocale;
+}
+const LocaleDataWrapper*    SdrGlobalData::GetLocaleData()
+{
+    if ( !pLocaleData )
+        pLocaleData = GetSysLocale()->GetLocaleDataPtr();
+    return pLocaleData;
+}
+
+namespace {
+
+struct TheSdrGlobalData: public rtl::Static<SdrGlobalData, TheSdrGlobalData> {};
+
+}
+
+SdrGlobalData & GetSdrGlobalData() {
+    return TheSdrGlobalData::get();
+}
+
+OLEObjCache::OLEObjCache()
+{
+    if (!utl::ConfigManager::IsFuzzing())
+        nSize = officecfg::Office::Common::Cache::DrawingEngine::OLE_Objects::get();
+    else
+        nSize = 100;
+    pTimer.reset( new AutoTimer( "svx OLEObjCache pTimer UnloadCheck" ) );
+    pTimer->SetInvokeHandler( LINK(this, OLEObjCache, UnloadCheckHdl) );
+    pTimer->SetTimeout(20000);
+    pTimer->SetStatic();
+}
+
+OLEObjCache::~OLEObjCache()
+{
+    pTimer->Stop();
+}
+
+IMPL_LINK_NOARG(OLEObjCache, UnloadCheckHdl, Timer*, void)
+{
+    if (nSize >= maObjs.size())
+        return;
+
+    // more objects than configured cache size try to remove objects
+    // of course not the freshly inserted one at nIndex=0
+    size_t nCount2 = maObjs.size();
+    size_t nIndex = nCount2-1;
+    while( nIndex && nCount2 > nSize )
+    {
+        SdrOle2Obj* pUnloadObj = maObjs[nIndex--];
+        if (!pUnloadObj)
+            continue;
+
+        try
+        {
+            // it is important to get object without reinitialization to avoid reentrance
+            uno::Reference< embed::XEmbeddedObject > xUnloadObj = pUnloadObj->GetObjRef_NoInit();
+
+            bool bUnload = SdrOle2Obj::CanUnloadRunningObj( xUnloadObj, pUnloadObj->GetAspect() );
+
+            // check whether the object can be unloaded before looking for the parent objects
+            if ( xUnloadObj.is() && bUnload )
+            {
+                uno::Reference< frame::XModel > xUnloadModel( xUnloadObj->getComponent(), uno::UNO_QUERY );
+                if ( xUnloadModel.is() )
+                {
+                    for (SdrOle2Obj* pCacheObj : maObjs)
+                    {
+                        if ( pCacheObj && pCacheObj != pUnloadObj )
+                        {
+                            uno::Reference< frame::XModel > xParentModel = pCacheObj->GetParentXModel();
+                            if ( xUnloadModel == xParentModel )
+                                bUnload = false; // the object has running embedded objects
+                        }
+                    }
+                }
+            }
+
+            if ( bUnload && UnloadObj(pUnloadObj) )
+                // object was successfully unloaded
+                nCount2--;
+        }
+        catch( uno::Exception& )
+        {}
+    }
+}
+
+void OLEObjCache::InsertObj(SdrOle2Obj* pObj)
+{
+    if (!maObjs.empty())
+    {
+        SdrOle2Obj* pExistingObj = maObjs.front();
+        if ( pObj == pExistingObj )
+            // the object is already on the top, nothing has to be changed
+            return;
+    }
+
+    // get the old position of the object to know whether it is already in container
+    std::vector<SdrOle2Obj*>::iterator it = std::find(maObjs.begin(), maObjs.end(), pObj);
+    bool bFound = it != maObjs.end();
+
+    if (bFound)
+        maObjs.erase(it);
+    // insert object into first position
+    maObjs.insert(maObjs.begin(), pObj);
+
+    // if a new object was inserted, recalculate the cache
+    if (!bFound)
+        pTimer->Invoke();
+
+    if (!bFound || !pTimer->IsActive())
+        pTimer->Start();
+}
+
+void OLEObjCache::RemoveObj(SdrOle2Obj* pObj)
+{
+    std::vector<SdrOle2Obj*>::iterator it = std::find(maObjs.begin(), maObjs.end(), pObj);
+    if (it != maObjs.end())
+        maObjs.erase(it);
+    if (maObjs.empty())
+        pTimer->Stop();
+}
+
+size_t OLEObjCache::size() const
+{
+    return maObjs.size();
+}
+
+SdrOle2Obj* OLEObjCache::operator[](size_t nPos)
+{
+    return maObjs[nPos];
+}
+
+const SdrOle2Obj* OLEObjCache::operator[](size_t nPos) const
+{
+    return maObjs[nPos];
+}
+
+bool OLEObjCache::UnloadObj(SdrOle2Obj* pObj)
+{
+    bool bUnloaded = false;
+    if (pObj)
+    {
+        //#i80528# The old mechanism is completely useless, only taking into account if
+        // in all views the GrafDraft feature is used. This will nearly never have been the
+        // case since no one ever used this option.
+
+        // A much better (and working) criteria would be the VOC contact count.
+        // The question is what will happen when i make it work now suddenly? I
+        // will try it for 2.4.
+        const sdr::contact::ViewContact& rViewContact = pObj->GetViewContact();
+        const bool bVisible(rViewContact.HasViewObjectContacts());
+
+        if(!bVisible)
+        {
+            bUnloaded = pObj->Unload();
+        }
+    }
+
+    return bUnloaded;
+}
+
+bool GetDraftFillColor(const SfxItemSet& rSet, Color& rCol)
+{
+    drawing::FillStyle eFill=rSet.Get(XATTR_FILLSTYLE).GetValue();
+    bool bRetval = false;
+
+    switch(eFill)
+    {
+        case drawing::FillStyle_SOLID:
+        {
+            rCol = rSet.Get(XATTR_FILLCOLOR).GetColorValue();
+            bRetval = true;
+
+            break;
+        }
+        case drawing::FillStyle_HATCH:
+        {
+            Color aCol1(rSet.Get(XATTR_FILLHATCH).GetHatchValue().GetColor());
+            Color aCol2(COL_WHITE);
+
+            // when hatched background is activated, use object fill color as hatch color
+            bool bFillHatchBackground = rSet.Get(XATTR_FILLBACKGROUND).GetValue();
+            if(bFillHatchBackground)
+            {
+                aCol2 = rSet.Get(XATTR_FILLCOLOR).GetColorValue();
+            }
+
+            const basegfx::BColor aAverageColor(basegfx::average(aCol1.getBColor(), aCol2.getBColor()));
+            rCol = Color(aAverageColor);
+            bRetval = true;
+
+            break;
+        }
+        case drawing::FillStyle_GRADIENT: {
+            const XGradient& rGrad=rSet.Get(XATTR_FILLGRADIENT).GetGradientValue();
+            Color aCol1(rGrad.GetStartColor());
+            Color aCol2(rGrad.GetEndColor());
+            const basegfx::BColor aAverageColor(basegfx::average(aCol1.getBColor(), aCol2.getBColor()));
+            rCol = Color(aAverageColor);
+            bRetval = true;
+
+            break;
+        }
+        case drawing::FillStyle_BITMAP:
+        {
+            Bitmap aBitmap(rSet.Get(XATTR_FILLBITMAP).GetGraphicObject().GetGraphic().GetBitmapEx().GetBitmap());
+            const Size aSize(aBitmap.GetSizePixel());
+            const sal_uInt32 nWidth = aSize.Width();
+            const sal_uInt32 nHeight = aSize.Height();
+            if (nWidth <= 0 || nHeight <= 0)
+                return bRetval;
+
+            Bitmap::ScopedReadAccess pAccess(aBitmap);
+
+            if (pAccess)
+            {
+                sal_uInt32 nRt(0);
+                sal_uInt32 nGn(0);
+                sal_uInt32 nBl(0);
+                const sal_uInt32 nMaxSteps(8);
+                const sal_uInt32 nXStep((nWidth > nMaxSteps) ? nWidth / nMaxSteps : 1);
+                const sal_uInt32 nYStep((nHeight > nMaxSteps) ? nHeight / nMaxSteps : 1);
+                sal_uInt32 nCount(0);
+
+                for(sal_uInt32 nY(0); nY < nHeight; nY += nYStep)
+                {
+                    for(sal_uInt32 nX(0); nX < nWidth; nX += nXStep)
+                    {
+                        const BitmapColor& rCol2 = pAccess->GetColor(nY, nX);
+
+                        nRt += rCol2.GetRed();
+                        nGn += rCol2.GetGreen();
+                        nBl += rCol2.GetBlue();
+                        nCount++;
+                    }
+                }
+
+                nRt /= nCount;
+                nGn /= nCount;
+                nBl /= nCount;
+
+                rCol = Color(sal_uInt8(nRt), sal_uInt8(nGn), sal_uInt8(nBl));
+
+                bRetval = true;
+            }
+            break;
+        }
+        default: break;
+    }
+
+    return bRetval;
+}
+
+std::unique_ptr<SdrOutliner> SdrMakeOutliner(OutlinerMode nOutlinerMode, SdrModel& rModel)
+{
+    SfxItemPool* pPool = &rModel.GetItemPool();
+    std::unique_ptr<SdrOutliner> pOutl(new SdrOutliner( pPool, nOutlinerMode ));
+    pOutl->SetEditTextObjectPool( pPool );
+    pOutl->SetStyleSheetPool( static_cast<SfxStyleSheetPool*>(rModel.GetStyleSheetPool()));
+    pOutl->SetDefTab(rModel.GetDefaultTabulator());
+    Outliner::SetForbiddenCharsTable(rModel.GetForbiddenCharsTable());
+    pOutl->SetAsianCompressionMode(rModel.GetCharCompressType());
+    pOutl->SetKernAsianPunctuation(rModel.IsKernAsianPunctuation());
+    pOutl->SetAddExtLeading(rModel.IsAddExtLeading());
+    return pOutl;
+}
+
+std::vector<Link<SdrObjCreatorParams, SdrObject*>>& ImpGetUserMakeObjHdl()
+{
+    SdrGlobalData& rGlobalData=GetSdrGlobalData();
+    return rGlobalData.aUserMakeObjHdl;
+}
+
+bool SearchOutlinerItems(const SfxItemSet& rSet, bool bInklDefaults, bool* pbOnlyEE)
+{
+    bool bHas=false;
+    bool bOnly=true;
+    bool bLookOnly=pbOnlyEE!=nullptr;
+    SfxWhichIter aIter(rSet);
+    sal_uInt16 nWhich=aIter.FirstWhich();
+    while (((bLookOnly && bOnly) || !bHas) && nWhich!=0) {
+        // For bInklDefaults, the entire Which range is decisive,
+        // in other cases only the set items are.
+        // Disabled and DontCare are regarded as holes in the Which range.
+        SfxItemState eState=rSet.GetItemState(nWhich);
+        if ((eState==SfxItemState::DEFAULT && bInklDefaults) || eState==SfxItemState::SET) {
+            if (nWhich<EE_ITEMS_START || nWhich>EE_ITEMS_END) bOnly=false;
+            else bHas=true;
+        }
+        nWhich=aIter.NextWhich();
+    }
+    if (!bHas) bOnly=false;
+    if (pbOnlyEE!=nullptr) *pbOnlyEE=bOnly;
+    return bHas;
+}
+
+std::unique_ptr<sal_uInt16[]> RemoveWhichRange(const sal_uInt16* pOldWhichTable, sal_uInt16 nRangeBeg, sal_uInt16 nRangeEnd)
+{
+    // Six possible cases (per range):
+    //         [Beg..End]          Range, to delete
+    // [b..e]    [b..e]    [b..e]  Cases 1,3,2: doesn't matter, delete, doesn't matter  + Ranges
+    // [b........e]  [b........e]  Cases 4,5  : shrink range                            | in
+    // [b......................e]  Case  6    : splitting                               + pOldWhichTable
+    sal_uInt16 nCount=0;
+    while (pOldWhichTable[nCount]!=0) nCount++;
+    nCount++; // nCount should now be an odd number (0 for end of array)
+    DBG_ASSERT((nCount&1)==1,"RemoveWhichRange: WhichTable doesn't have an odd number of entries.");
+    sal_uInt16 nAlloc=nCount;
+    // check necessary size of new array
+    sal_uInt16 nNum=nCount-1;
+    while (nNum!=0) {
+        nNum-=2;
+        sal_uInt16 nBeg=pOldWhichTable[nNum];
+        sal_uInt16 nEnd=pOldWhichTable[nNum+1];
+        if (nEnd<nRangeBeg)  /*nCase=1*/ ;
+        else if (nBeg>nRangeEnd) /* nCase=2 */ ;
+        else if (nBeg>=nRangeBeg && nEnd<=nRangeEnd) /* nCase=3 */ nAlloc-=2;
+        else if (nEnd<=nRangeEnd) /* nCase=4 */;
+        else if (nBeg>=nRangeBeg) /* nCase=5*/ ;
+        else /* nCase=6 */ nAlloc+=2;
+    }
+
+    std::unique_ptr<sal_uInt16[]> pNewWhichTable(new sal_uInt16[nAlloc]);
+    memcpy(pNewWhichTable.get(), pOldWhichTable, nAlloc*sizeof(sal_uInt16));
+    pNewWhichTable[nAlloc-1]=0; // in case 3, there's no 0 at the end.
+    // now remove the unwanted ranges
+    nNum=nAlloc-1;
+    while (nNum!=0) {
+        nNum-=2;
+        sal_uInt16 nBeg=pNewWhichTable[nNum];
+        sal_uInt16 nEnd=pNewWhichTable[nNum+1];
+        unsigned nCase=0;
+        if (nEnd<nRangeBeg) nCase=1;
+        else if (nBeg>nRangeEnd) nCase=2;
+        else if (nBeg>=nRangeBeg && nEnd<=nRangeEnd) nCase=3;
+        else if (nEnd<=nRangeEnd) nCase=4;
+        else if (nBeg>=nRangeBeg) nCase=5;
+        else nCase=6;
+        switch (nCase) {
+            case 3: {
+                unsigned nTailBytes=(nCount-(nNum+2))*sizeof(sal_uInt16);
+                memcpy(&pNewWhichTable[nNum],&pNewWhichTable[nNum+2],nTailBytes);
+                nCount-=2; // remember: array is now smaller
+            } break;
+            case 4: pNewWhichTable[nNum+1]=nRangeBeg-1; break;
+            case 5: pNewWhichTable[nNum]=nRangeEnd+1;     break;
+            case 6: {
+                unsigned nTailBytes=(nCount-(nNum+2))*sizeof(sal_uInt16);
+                memcpy(&pNewWhichTable[nNum+4],&pNewWhichTable[nNum+2],nTailBytes);
+                nCount+=2; // remember:array is now larger
+                pNewWhichTable[nNum+2]=nRangeEnd+1;
+                pNewWhichTable[nNum+3]=pNewWhichTable[nNum+1];
+                pNewWhichTable[nNum+1]=nRangeBeg-1;
+            } break;
+        } // switch
+    }
+    return pNewWhichTable;
+}
+
+
+SvdProgressInfo::SvdProgressInfo( const Link<void*,bool>&_rLink )
+{
+    maLink = _rLink;
+    m_nSumCurAction   = 0;
+
+    m_nObjCount = 0;
+    m_nCurObj   = 0;
+
+    m_nActionCount = 0;
+    m_nCurAction   = 0;
+
+    m_nInsertCount = 0;
+    m_nCurInsert   = 0;
+}
+
+void SvdProgressInfo::Init( size_t nObjCount )
+{
+    m_nObjCount = nObjCount;
+}
+
+bool SvdProgressInfo::ReportActions( size_t nActionCount )
+{
+    m_nSumCurAction += nActionCount;
+    m_nCurAction += nActionCount;
+    if(m_nCurAction > m_nActionCount)
+        m_nCurAction = m_nActionCount;
+
+    return maLink.Call(nullptr);
+}
+
+void SvdProgressInfo::ReportInserts( size_t nInsertCount )
+{
+    m_nSumCurAction += nInsertCount;
+    m_nCurInsert += nInsertCount;
+
+    maLink.Call(nullptr);
+}
+
+void SvdProgressInfo::ReportRescales( size_t nRescaleCount )
+{
+    m_nSumCurAction += nRescaleCount;
+    maLink.Call(nullptr);
+}
+
+void SvdProgressInfo::SetActionCount( size_t nActionCount )
+{
+    m_nActionCount = nActionCount;
+}
+
+void SvdProgressInfo::SetInsertCount( size_t nInsertCount )
+{
+    m_nInsertCount = nInsertCount;
+}
+
+void SvdProgressInfo::SetNextObject()
+{
+    m_nActionCount = 0;
+    m_nCurAction   = 0;
+
+    m_nInsertCount = 0;
+    m_nCurInsert   = 0;
+
+    m_nCurObj++;
+    ReportActions(0);
+}
+
+// #i101872# isolate GetTextEditBackgroundColor to tooling; it will anyways only be used as long
+// as text edit is not running on overlay
+
+namespace
+{
+    bool impGetSdrObjListFillColor(
+        const SdrObjList& rList,
+        const Point& rPnt,
+        const SdrPageView& rTextEditPV,
+        const SdrLayerIDSet& rVisLayers,
+        Color& rCol)
+    {
+        bool bRet(false);
+        bool bMaster(rList.getSdrPageFromSdrObjList() && rList.getSdrPageFromSdrObjList()->IsMasterPage());
+
+        for(size_t no(rList.GetObjCount()); !bRet && no > 0; )
+        {
+            no--;
+            SdrObject* pObj = rList.GetObj(no);
+            SdrObjList* pOL = pObj->GetSubList();
+
+            if(pOL)
+            {
+                // group object
+                bRet = impGetSdrObjListFillColor(*pOL, rPnt, rTextEditPV, rVisLayers, rCol);
+            }
+            else
+            {
+                SdrTextObj* pText = dynamic_cast< SdrTextObj * >(pObj);
+
+                // Exclude zero master page object (i.e. background shape) from color query
+                if(pText
+                    && pObj->IsClosedObj()
+                    && (!bMaster || (!pObj->IsNotVisibleAsMaster() && 0 != no))
+                    && pObj->GetCurrentBoundRect().IsInside(rPnt)
+                    && !pText->IsHideContour()
+                    && SdrObjectPrimitiveHit(*pObj, rPnt, 0, rTextEditPV, &rVisLayers, false))
+                {
+                    bRet = GetDraftFillColor(pObj->GetMergedItemSet(), rCol);
+                }
+            }
+        }
+
+        return bRet;
+    }
+
+    bool impGetSdrPageFillColor(
+        const SdrPage& rPage,
+        const Point& rPnt,
+        const SdrPageView& rTextEditPV,
+        const SdrLayerIDSet& rVisLayers,
+        Color& rCol,
+        bool bSkipBackgroundShape)
+    {
+        bool bRet(impGetSdrObjListFillColor(rPage, rPnt, rTextEditPV, rVisLayers, rCol));
+
+        if(!bRet && !rPage.IsMasterPage())
+        {
+            if(rPage.TRG_HasMasterPage())
+            {
+                SdrLayerIDSet aSet(rVisLayers);
+                aSet &= rPage.TRG_GetMasterPageVisibleLayers();
+                SdrPage& rMasterPage = rPage.TRG_GetMasterPage();
+
+                // Don't fall back to background shape on
+                // master pages. This is later handled by
+                // GetBackgroundColor, and is necessary to cater for
+                // the silly ordering: 1. shapes, 2. master page
+                // shapes, 3. page background, 4. master page
+                // background.
+                bRet = impGetSdrPageFillColor(rMasterPage, rPnt, rTextEditPV, aSet, rCol, true);
+            }
+        }
+
+        // Only now determine background color from background shapes
+        if(!bRet && !bSkipBackgroundShape)
+        {
+            rCol = rPage.GetPageBackgroundColor();
+            return true;
+        }
+
+        return bRet;
+    }
+
+    Color impCalcBackgroundColor(
+        const tools::Rectangle& rArea,
+        const SdrPageView& rTextEditPV,
+        const SdrPage& rPage)
+    {
+        svtools::ColorConfig aColorConfig;
+        Color aBackground(aColorConfig.GetColorValue(svtools::DOCCOLOR).nColor);
+        const StyleSettings& rStyleSettings = Application::GetSettings().GetStyleSettings();
+
+        if(!rStyleSettings.GetHighContrastMode())
+        {
+            // search in page
+            const sal_uInt16 SPOTCOUNT(5);
+            Point aSpotPos[SPOTCOUNT];
+            Color aSpotColor[SPOTCOUNT];
+            sal_uInt32 nHeight( rArea.GetSize().Height() );
+            sal_uInt32 nWidth( rArea.GetSize().Width() );
+            sal_uInt32 nWidth14  = nWidth / 4;
+            sal_uInt32 nHeight14 = nHeight / 4;
+            sal_uInt32 nWidth34  = ( 3 * nWidth ) / 4;
+            sal_uInt32 nHeight34 = ( 3 * nHeight ) / 4;
+
+            sal_uInt16 i;
+            for ( i = 0; i < SPOTCOUNT; i++ )
+            {
+                // five spots are used
+                switch ( i )
+                {
+                    case 0 :
+                    {
+                        // Center-Spot
+                        aSpotPos[i] = rArea.Center();
+                    }
+                    break;
+
+                    case 1 :
+                    {
+                        // TopLeft-Spot
+                        aSpotPos[i] = rArea.TopLeft();
+                        aSpotPos[i].AdjustX(nWidth14 );
+                        aSpotPos[i].AdjustY(nHeight14 );
+                    }
+                    break;
+
+                    case 2 :
+                    {
+                        // TopRight-Spot
+                        aSpotPos[i] = rArea.TopLeft();
+                        aSpotPos[i].AdjustX(nWidth34 );
+                        aSpotPos[i].AdjustY(nHeight14 );
+                    }
+                    break;
+
+                    case 3 :
+                    {
+                        // BottomLeft-Spot
+                        aSpotPos[i] = rArea.TopLeft();
+                        aSpotPos[i].AdjustX(nWidth14 );
+                        aSpotPos[i].AdjustY(nHeight34 );
+                    }
+                    break;
+
+                    case 4 :
+                    {
+                        // BottomRight-Spot
+                        aSpotPos[i] = rArea.TopLeft();
+                        aSpotPos[i].AdjustX(nWidth34 );
+                        aSpotPos[i].AdjustY(nHeight34 );
+                    }
+                    break;
+
+                }
+
+                aSpotColor[i] = COL_WHITE;
+                impGetSdrPageFillColor(rPage, aSpotPos[i], rTextEditPV, rTextEditPV.GetVisibleLayers(), aSpotColor[i], false);
+            }
+
+            sal_uInt16 aMatch[SPOTCOUNT];
+
+            for ( i = 0; i < SPOTCOUNT; i++ )
+            {
+                // were same spot colors found?
+                aMatch[i] = 0;
+
+                for ( sal_uInt16 j = 0; j < SPOTCOUNT; j++ )
+                {
+                    if( j != i )
+                    {
+                        if( aSpotColor[i] == aSpotColor[j] )
+                        {
+                            aMatch[i]++;
+                        }
+                    }
+                }
+            }
+
+            // highest weight to center spot
+            aBackground = aSpotColor[0];
+
+            for ( sal_uInt16 nMatchCount = SPOTCOUNT - 1; nMatchCount > 1; nMatchCount-- )
+            {
+                // which spot color was found most?
+                for ( i = 0; i < SPOTCOUNT; i++ )
+                {
+                    if( aMatch[i] == nMatchCount )
+                    {
+                        aBackground = aSpotColor[i];
+                        nMatchCount = 1;   // break outer for-loop
+                        break;
+                    }
+                }
+            }
+        }
+
+        return aBackground;
+    }
+} // end of anonymous namespace
+
+Color GetTextEditBackgroundColor(const SdrObjEditView& rView)
+{
+    svtools::ColorConfig aColorConfig;
+    Color aBackground(aColorConfig.GetColorValue(svtools::DOCCOLOR).nColor);
+    const StyleSettings& rStyleSettings = Application::GetSettings().GetStyleSettings();
+
+    if(!rStyleSettings.GetHighContrastMode())
+    {
+        bool bFound(false);
+        SdrTextObj* pText = rView.GetTextEditObject();
+
+        if(pText && pText->IsClosedObj())
+        {
+            sdr::table::SdrTableObj* pTable = dynamic_cast< sdr::table::SdrTableObj * >( pText );
+
+            if( pTable )
+                bFound = GetDraftFillColor(pTable->GetActiveCellItemSet(), aBackground );
+
+            if( !bFound )
+                bFound=GetDraftFillColor(pText->GetMergedItemSet(), aBackground);
+        }
+
+        if(!bFound && pText)
+        {
+            SdrPageView* pTextEditPV = rView.GetTextEditPageView();
+
+            if(pTextEditPV)
+            {
+                Point aPvOfs(pText->GetTextEditOffset());
+                const SdrPage* pPg = pTextEditPV->GetPage();
+
+                if(pPg)
+                {
+                    tools::Rectangle aSnapRect( pText->GetSnapRect() );
+                    aSnapRect.Move(aPvOfs.X(), aPvOfs.Y());
+
+                    return impCalcBackgroundColor(aSnapRect, *pTextEditPV, *pPg);
+                }
+            }
+        }
+    }
+
+    return aBackground;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdfmtf.cxx b/svx/source/svdraw/svdfmtf.cxx
new file mode 100644
index 000000000..4adefe0cb
--- /dev/null
+++ b/svx/source/svdraw/svdfmtf.cxx
@@ -0,0 +1,1649 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include "svdfmtf.hxx"
+#include <math.h>
+#include <editeng/eeitem.hxx>
+#include <editeng/fhgtitem.hxx>
+#include <editeng/wghtitem.hxx>
+#include <editeng/postitem.hxx>
+#include <editeng/udlnitem.hxx>
+#include <editeng/crossedoutitem.hxx>
+#include <editeng/shdditem.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xlncapit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xgrad.hxx>
+#include <svx/xflgrit.hxx>
+#include <editeng/fontitem.hxx>
+#include <editeng/wrlmitem.hxx>
+#include <editeng/contouritem.hxx>
+#include <editeng/colritem.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/metric.hxx>
+#include <editeng/charscaleitem.hxx>
+#include <svx/xflhtit.hxx>
+#include <svx/sdmetitm.hxx>
+#include <svx/sdtagitm.hxx>
+#include <svx/sdtaitm.hxx>
+#include <svx/sdtditm.hxx>
+#include <svx/sdtfsitm.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdorect.hxx>
+#include <svx/svdocirc.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdetc.hxx>
+#include <svl/itemset.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <tools/helpers.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <svx/xlinjoit.hxx>
+#include <svx/xlndsit.hxx>
+#include <basegfx/polygon/b2dpolygonclipper.hxx>
+#include <svx/xbtmpit.hxx>
+#include <svx/xfltrit.hxx>
+#include <svx/xflbmtit.hxx>
+#include <svx/xflbstit.hxx>
+#include <svx/svdpntv.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <svx/svditer.hxx>
+#include <svx/svdogrp.hxx>
+#include <vcl/BitmapTools.hxx>
+
+using namespace com::sun::star;
+
+ImpSdrGDIMetaFileImport::ImpSdrGDIMetaFileImport(
+    SdrModel& rModel,
+    SdrLayerID nLay,
+    const tools::Rectangle& rRect)
+:   maTmpList(),
+    mpVD(VclPtr<VirtualDevice>::Create()),
+    maScaleRect(rRect),
+    mnMapScalingOfs(0),
+    mpModel(&rModel),
+    mnLayer(nLay),
+    maOldLineColor(),
+    mnLineWidth(0),
+    maLineJoin(basegfx::B2DLineJoin::NONE),
+    maLineCap(css::drawing::LineCap_BUTT),
+    maDash(css::drawing::DashStyle_RECT, 0, 0, 0, 0, 0),
+    mbMov(false),
+    mbSize(false),
+    maOfs(0, 0),
+    mfScaleX(1.0),
+    mfScaleY(1.0),
+    maScaleX(1.0),
+    maScaleY(1.0),
+    mbFntDirty(true),
+    mbLastObjWasPolyWithoutLine(false),
+    mbNoLine(false),
+    mbNoFill(false),
+    mbLastObjWasLine(false),
+    maClip()
+{
+    mpVD->EnableOutput(false);
+    mpVD->SetLineColor();
+    mpVD->SetFillColor();
+    maOldLineColor.SetRed( mpVD->GetLineColor().GetRed() + 1 );
+    mpLineAttr = std::make_unique<SfxItemSet>(rModel.GetItemPool(), svl::Items<XATTR_LINE_FIRST, XATTR_LINE_LAST>{});
+    mpFillAttr = std::make_unique<SfxItemSet>(rModel.GetItemPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+    mpTextAttr = std::make_unique<SfxItemSet>(rModel.GetItemPool(), svl::Items<EE_ITEMS_START, EE_ITEMS_END>{});
+    checkClip();
+}
+
+void ImpSdrGDIMetaFileImport::DoLoopActions(GDIMetaFile const & rMtf, SvdProgressInfo* pProgrInfo, sal_uInt32* pActionsToReport)
+{
+    const sal_uLong nCount(rMtf.GetActionSize());
+
+    for(sal_uLong a(0); a < nCount; a++)
+    {
+        MetaAction* pAct = rMtf.GetAction(a);
+
+        if(!pAct)
+        {
+            OSL_ENSURE(false, "OOps, no action at valid position (!)");
+            pAct = rMtf.GetAction(0);
+        }
+
+        switch (pAct->GetType())
+        {
+            case MetaActionType::PIXEL          : break;
+            case MetaActionType::POINT          : break;
+            case MetaActionType::LINE           : DoAction(static_cast<MetaLineAction           &>(*pAct)); break;
+            case MetaActionType::RECT           : DoAction(static_cast<MetaRectAction           &>(*pAct)); break;
+            case MetaActionType::ROUNDRECT      : DoAction(static_cast<MetaRoundRectAction      &>(*pAct)); break;
+            case MetaActionType::ELLIPSE        : DoAction(static_cast<MetaEllipseAction        &>(*pAct)); break;
+            case MetaActionType::ARC            : DoAction(static_cast<MetaArcAction            &>(*pAct)); break;
+            case MetaActionType::PIE            : DoAction(static_cast<MetaPieAction            &>(*pAct)); break;
+            case MetaActionType::CHORD          : DoAction(static_cast<MetaChordAction          &>(*pAct)); break;
+            case MetaActionType::POLYLINE       : DoAction(static_cast<MetaPolyLineAction       &>(*pAct)); break;
+            case MetaActionType::POLYGON        : DoAction(static_cast<MetaPolygonAction        &>(*pAct)); break;
+            case MetaActionType::POLYPOLYGON    : DoAction(static_cast<MetaPolyPolygonAction    &>(*pAct)); break;
+            case MetaActionType::TEXT           : DoAction(static_cast<MetaTextAction           &>(*pAct)); break;
+            case MetaActionType::TEXTARRAY      : DoAction(static_cast<MetaTextArrayAction      &>(*pAct)); break;
+            case MetaActionType::STRETCHTEXT    : DoAction(static_cast<MetaStretchTextAction    &>(*pAct)); break;
+            case MetaActionType::BMP            : DoAction(static_cast<MetaBmpAction            &>(*pAct)); break;
+            case MetaActionType::BMPSCALE       : DoAction(static_cast<MetaBmpScaleAction       &>(*pAct)); break;
+            case MetaActionType::BMPEX          : DoAction(static_cast<MetaBmpExAction          &>(*pAct)); break;
+            case MetaActionType::BMPEXSCALE     : DoAction(static_cast<MetaBmpExScaleAction     &>(*pAct)); break;
+            case MetaActionType::LINECOLOR      : DoAction(static_cast<MetaLineColorAction      &>(*pAct)); break;
+            case MetaActionType::FILLCOLOR      : DoAction(static_cast<MetaFillColorAction      &>(*pAct)); break;
+            case MetaActionType::TEXTCOLOR      : DoAction(static_cast<MetaTextColorAction      &>(*pAct)); break;
+            case MetaActionType::TEXTFILLCOLOR  : DoAction(static_cast<MetaTextFillColorAction  &>(*pAct)); break;
+            case MetaActionType::FONT           : DoAction(static_cast<MetaFontAction           &>(*pAct)); break;
+            case MetaActionType::TEXTALIGN      : DoAction(static_cast<MetaTextAlignAction      &>(*pAct)); break;
+            case MetaActionType::MAPMODE        : DoAction(static_cast<MetaMapModeAction        &>(*pAct)); break;
+            case MetaActionType::CLIPREGION     : DoAction(static_cast<MetaClipRegionAction     &>(*pAct)); break;
+            case MetaActionType::MOVECLIPREGION : DoAction(static_cast<MetaMoveClipRegionAction &>(*pAct)); break;
+            case MetaActionType::ISECTRECTCLIPREGION: DoAction(static_cast<MetaISectRectClipRegionAction&>(*pAct)); break;
+            case MetaActionType::ISECTREGIONCLIPREGION: DoAction(static_cast<MetaISectRegionClipRegionAction&>(*pAct)); break;
+            case MetaActionType::RASTEROP       : DoAction(static_cast<MetaRasterOpAction       &>(*pAct)); break;
+            case MetaActionType::PUSH           : DoAction(static_cast<MetaPushAction           &>(*pAct)); break;
+            case MetaActionType::POP            : DoAction(static_cast<MetaPopAction            &>(*pAct)); break;
+            case MetaActionType::HATCH          : DoAction(static_cast<MetaHatchAction          &>(*pAct)); break;
+
+            // #i125211# MetaCommentAction may change index, thus hand it over
+            case MetaActionType::COMMENT        : DoAction(static_cast<MetaCommentAction&>(*pAct), rMtf, a);
+                break;
+
+            // missing actions added
+            case MetaActionType::TEXTRECT       : DoAction(static_cast<MetaTextRectAction&>(*pAct)); break;
+            case MetaActionType::BMPSCALEPART   : DoAction(static_cast<MetaBmpScalePartAction&>(*pAct)); break;
+            case MetaActionType::BMPEXSCALEPART : DoAction(static_cast<MetaBmpExScalePartAction&>(*pAct)); break;
+            case MetaActionType::MASK           : DoAction(static_cast<MetaMaskAction&>(*pAct)); break;
+            case MetaActionType::MASKSCALE      : DoAction(static_cast<MetaMaskScaleAction&>(*pAct)); break;
+            case MetaActionType::MASKSCALEPART  : DoAction(static_cast<MetaMaskScalePartAction&>(*pAct)); break;
+            case MetaActionType::GRADIENT       : DoAction(static_cast<MetaGradientAction&>(*pAct)); break;
+            case MetaActionType::WALLPAPER      : OSL_ENSURE(false, "Tried to construct SdrObject from MetaWallpaperAction: not supported (!)"); break;
+            case MetaActionType::Transparent    : DoAction(static_cast<MetaTransparentAction&>(*pAct)); break;
+            case MetaActionType::EPS            : OSL_ENSURE(false, "Tried to construct SdrObject from MetaEPSAction: not supported (!)"); break;
+            case MetaActionType::REFPOINT       : DoAction(static_cast<MetaRefPointAction&>(*pAct)); break;
+            case MetaActionType::TEXTLINECOLOR  : DoAction(static_cast<MetaTextLineColorAction&>(*pAct)); break;
+            case MetaActionType::TEXTLINE       : OSL_ENSURE(false, "Tried to construct SdrObject from MetaTextLineAction: not supported (!)"); break;
+            case MetaActionType::FLOATTRANSPARENT : DoAction(static_cast<MetaFloatTransparentAction&>(*pAct)); break;
+            case MetaActionType::GRADIENTEX     : DoAction(static_cast<MetaGradientExAction&>(*pAct)); break;
+            case MetaActionType::LAYOUTMODE     : DoAction(static_cast<MetaLayoutModeAction&>(*pAct)); break;
+            case MetaActionType::TEXTLANGUAGE   : DoAction(static_cast<MetaTextLanguageAction&>(*pAct)); break;
+            case MetaActionType::OVERLINECOLOR  : DoAction(static_cast<MetaOverlineColorAction&>(*pAct)); break;
+            default: break;
+        }
+
+        if(pProgrInfo && pActionsToReport)
+        {
+            (*pActionsToReport)++;
+
+            if(*pActionsToReport >= 16) // update all 16 actions
+            {
+                if(!pProgrInfo->ReportActions(*pActionsToReport))
+                    break;
+
+                *pActionsToReport = 0;
+            }
+        }
+    }
+}
+
+size_t ImpSdrGDIMetaFileImport::DoImport(
+    const GDIMetaFile& rMtf,
+    SdrObjList& rOL,
+    size_t nInsPos,
+    SvdProgressInfo* pProgrInfo)
+{
+    // setup some global scale parameter
+    // mfScaleX, mfScaleY, maScaleX, maScaleY, mbMov, mbSize
+    mfScaleX = mfScaleY = 1.0;
+    const Size aMtfSize(rMtf.GetPrefSize());
+
+    if(aMtfSize.Width() & aMtfSize.Height() && (!maScaleRect.IsEmpty()))
+    {
+        maOfs = maScaleRect.TopLeft();
+
+        if(aMtfSize.Width() != (maScaleRect.GetWidth() - 1))
+        {
+            mfScaleX = static_cast<double>( maScaleRect.GetWidth() - 1 ) / static_cast<double>(aMtfSize.Width());
+        }
+
+        if(aMtfSize.Height() != (maScaleRect.GetHeight() - 1))
+        {
+            mfScaleY = static_cast<double>( maScaleRect.GetHeight() - 1 ) / static_cast<double>(aMtfSize.Height());
+        }
+    }
+
+    mbMov = maOfs.X()!=0 || maOfs.Y()!=0;
+    mbSize = false;
+    maScaleX = Fraction( 1, 1 );
+    maScaleY = Fraction( 1, 1 );
+
+    if(aMtfSize.Width() != (maScaleRect.GetWidth() - 1))
+    {
+        maScaleX = Fraction(maScaleRect.GetWidth() - 1, aMtfSize.Width());
+        mbSize = true;
+    }
+
+    if(aMtfSize.Height() != (maScaleRect.GetHeight() - 1))
+    {
+        maScaleY = Fraction(maScaleRect.GetHeight() - 1, aMtfSize.Height());
+        mbSize = true;
+    }
+
+    if(pProgrInfo)
+    {
+        pProgrInfo->SetActionCount(rMtf.GetActionSize());
+    }
+
+    sal_uInt32 nActionsToReport(0);
+
+    // execute
+    DoLoopActions(rMtf, pProgrInfo, &nActionsToReport);
+
+    if(pProgrInfo)
+    {
+        pProgrInfo->ReportActions(nActionsToReport);
+        nActionsToReport = 0;
+    }
+
+    // MapMode scaling
+    MapScaling();
+
+    // To calculate the progress meter, we use GetActionSize()*3.
+    // However, maTmpList has a lower entry count limit than GetActionSize(),
+    // so the actions that were assumed were too much have to be re-added.
+    nActionsToReport = (rMtf.GetActionSize() - maTmpList.size()) * 2;
+
+    // announce all currently unannounced rescales
+    if(pProgrInfo)
+    {
+        pProgrInfo->ReportRescales(nActionsToReport);
+        pProgrInfo->SetInsertCount(maTmpList.size());
+    }
+
+    nActionsToReport = 0;
+
+    // insert all objects cached in aTmpList now into rOL from nInsPos
+    nInsPos = std::min(nInsPos, rOL.GetObjCount());
+
+    for(SdrObject* pObj : maTmpList)
+    {
+        rOL.NbcInsertObject(pObj, nInsPos);
+        nInsPos++;
+
+        if(pProgrInfo)
+        {
+            nActionsToReport++;
+
+            if(nActionsToReport >= 32) // update all 32 actions
+            {
+                pProgrInfo->ReportInserts(nActionsToReport);
+                nActionsToReport = 0;
+            }
+        }
+    }
+
+    // report all remaining inserts for the last time
+    if(pProgrInfo)
+    {
+        pProgrInfo->ReportInserts(nActionsToReport);
+    }
+
+    return maTmpList.size();
+}
+
+void ImpSdrGDIMetaFileImport::SetAttributes(SdrObject* pObj, bool bForceTextAttr)
+{
+    mbNoLine = false;
+    mbNoFill = false;
+    bool bLine(!bForceTextAttr);
+    bool bFill(!pObj || (pObj->IsClosedObj() && !bForceTextAttr));
+    bool bText(bForceTextAttr || (pObj && pObj->GetOutlinerParaObject()));
+
+    if(bLine)
+    {
+        if(mnLineWidth)
+        {
+            mpLineAttr->Put(XLineWidthItem(mnLineWidth));
+        }
+        else
+        {
+            mpLineAttr->Put(XLineWidthItem(0));
+        }
+
+        maOldLineColor = mpVD->GetLineColor();
+
+        if(mpVD->IsLineColor())
+        {
+            mpLineAttr->Put(XLineStyleItem(drawing::LineStyle_SOLID));
+            mpLineAttr->Put(XLineColorItem(OUString(), mpVD->GetLineColor()));
+        }
+        else
+        {
+            mpLineAttr->Put(XLineStyleItem(drawing::LineStyle_NONE));
+        }
+
+        switch(maLineJoin)
+        {
+            case basegfx::B2DLineJoin::NONE:
+                mpLineAttr->Put(XLineJointItem(css::drawing::LineJoint_NONE));
+                break;
+            case basegfx::B2DLineJoin::Bevel:
+                mpLineAttr->Put(XLineJointItem(css::drawing::LineJoint_BEVEL));
+                break;
+            case basegfx::B2DLineJoin::Miter:
+                mpLineAttr->Put(XLineJointItem(css::drawing::LineJoint_MITER));
+                break;
+            case basegfx::B2DLineJoin::Round:
+                mpLineAttr->Put(XLineJointItem(css::drawing::LineJoint_ROUND));
+                break;
+        }
+
+        // Add LineCap support
+        mpLineAttr->Put(XLineCapItem(maLineCap));
+
+        if(((maDash.GetDots() && maDash.GetDotLen()) || (maDash.GetDashes() && maDash.GetDashLen())) && maDash.GetDistance())
+        {
+            mpLineAttr->Put(XLineDashItem(OUString(), maDash));
+        }
+        else
+        {
+            mpLineAttr->Put(XLineDashItem(OUString(), XDash(css::drawing::DashStyle_RECT)));
+        }
+    }
+    else
+    {
+        mbNoLine = true;
+    }
+
+    if(bFill)
+    {
+        if(mpVD->IsFillColor())
+        {
+            mpFillAttr->Put(XFillStyleItem(drawing::FillStyle_SOLID));
+            mpFillAttr->Put(XFillColorItem(OUString(), mpVD->GetFillColor()));
+        }
+        else
+        {
+            mpFillAttr->Put(XFillStyleItem(drawing::FillStyle_NONE));
+        }
+    }
+    else
+    {
+        mbNoFill = true;
+    }
+
+    if(bText && mbFntDirty)
+    {
+        vcl::Font aFnt(mpVD->GetFont());
+        const sal_uInt32 nHeight(FRound(aFnt.GetFontSize().Height() * mfScaleY));
+
+        mpTextAttr->Put( SvxFontItem( aFnt.GetFamilyType(), aFnt.GetFamilyName(), aFnt.GetStyleName(), aFnt.GetPitch(), aFnt.GetCharSet(), EE_CHAR_FONTINFO ) );
+        mpTextAttr->Put( SvxFontItem( aFnt.GetFamilyType(), aFnt.GetFamilyName(), aFnt.GetStyleName(), aFnt.GetPitch(), aFnt.GetCharSet(), EE_CHAR_FONTINFO_CJK ) );
+        mpTextAttr->Put( SvxFontItem( aFnt.GetFamilyType(), aFnt.GetFamilyName(), aFnt.GetStyleName(), aFnt.GetPitch(), aFnt.GetCharSet(), EE_CHAR_FONTINFO_CTL ) );
+        mpTextAttr->Put(SvxPostureItem(aFnt.GetItalic(), EE_CHAR_ITALIC));
+        mpTextAttr->Put(SvxWeightItem(aFnt.GetWeight(), EE_CHAR_WEIGHT));
+        mpTextAttr->Put( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT ) );
+        mpTextAttr->Put( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT_CJK ) );
+        mpTextAttr->Put( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT_CTL ) );
+        mpTextAttr->Put(SvxCharScaleWidthItem(100, EE_CHAR_FONTWIDTH));
+        mpTextAttr->Put(SvxUnderlineItem(aFnt.GetUnderline(), EE_CHAR_UNDERLINE));
+        mpTextAttr->Put(SvxOverlineItem(aFnt.GetOverline(), EE_CHAR_OVERLINE));
+        mpTextAttr->Put(SvxCrossedOutItem(aFnt.GetStrikeout(), EE_CHAR_STRIKEOUT));
+        mpTextAttr->Put(SvxShadowedItem(aFnt.IsShadow(), EE_CHAR_SHADOW));
+
+        // #i118485# Setting this item leads to problems (written #i118498# for this)
+        // mpTextAttr->Put(SvxAutoKernItem(aFnt.IsKerning(), EE_CHAR_KERNING));
+
+        mpTextAttr->Put(SvxWordLineModeItem(aFnt.IsWordLineMode(), EE_CHAR_WLM));
+        mpTextAttr->Put(SvxContourItem(aFnt.IsOutline(), EE_CHAR_OUTLINE));
+        mpTextAttr->Put(SvxColorItem(mpVD->GetTextColor(), EE_CHAR_COLOR));
+        //... svxfont textitem svditext
+        mbFntDirty = false;
+    }
+
+    if(pObj)
+    {
+        pObj->SetLayer(mnLayer);
+
+        if(bLine)
+        {
+            pObj->SetMergedItemSet(*mpLineAttr);
+        }
+
+        if(bFill)
+        {
+            pObj->SetMergedItemSet(*mpFillAttr);
+        }
+
+        if(bText)
+        {
+            pObj->SetMergedItemSet(*mpTextAttr);
+            pObj->SetMergedItem(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_LEFT));
+        }
+    }
+}
+
+void ImpSdrGDIMetaFileImport::InsertObj(SdrObject* pObj, bool bScale)
+{
+    if(bScale && !maScaleRect.IsEmpty())
+    {
+        if(mbSize)
+        {
+            pObj->NbcResize(Point(), maScaleX, maScaleY);
+        }
+
+        if(mbMov)
+        {
+            pObj->NbcMove(Size(maOfs.X(), maOfs.Y()));
+        }
+    }
+
+    if(isClip())
+    {
+        const basegfx::B2DPolyPolygon aPoly(pObj->TakeXorPoly());
+        const basegfx::B2DRange aOldRange(aPoly.getB2DRange());
+        const SdrLayerID aOldLayer(pObj->GetLayer());
+        const SfxItemSet aOldItemSet(pObj->GetMergedItemSet());
+        const SdrGrafObj* pSdrGrafObj = dynamic_cast< SdrGrafObj* >(pObj);
+        const SdrTextObj* pSdrTextObj = dynamic_cast< SdrTextObj* >(pObj);
+
+        if(pSdrTextObj && pSdrTextObj->HasText())
+        {
+            // all text objects are created from ImportText and have no line or fill attributes, so
+            // it is okay to concentrate on the text itself
+            while(true)
+            {
+                const basegfx::B2DPolyPolygon aTextContour(pSdrTextObj->TakeContour());
+                const basegfx::B2DRange aTextRange(aTextContour.getB2DRange());
+                const basegfx::B2DRange aClipRange(maClip.getB2DRange());
+
+                // no overlap -> completely outside
+                if(!aClipRange.overlaps(aTextRange))
+                {
+                    SdrObject::Free(pObj);
+                    break;
+                }
+
+                // when the clip is a rectangle fast check for inside is possible
+                if(basegfx::utils::isRectangle(maClip) && aClipRange.isInside(aTextRange))
+                {
+                    // completely inside ClipRect
+                    break;
+                }
+
+                // here text needs to be clipped; to do so, convert to SdrObjects with polygons
+                // and add these recursively. Delete original object, do not add in this run
+                SdrObject* pConverted = pSdrTextObj->ConvertToPolyObj(true, true).release();
+                SdrObject::Free(pObj);
+
+                if(pConverted)
+                {
+                    // recursively add created conversion; per definition this shall not
+                    // contain further SdrTextObjs. Visit only non-group objects
+                    SdrObjListIter aIter(*pConverted, SdrIterMode::DeepNoGroups);
+
+                    // work with clones; the created conversion may contain group objects
+                    // and when working with the original objects the loop itself could
+                    // break and the cleanup later would be pretty complicated (only delete group
+                    // objects, are these empty, ...?)
+                    while(aIter.IsMore())
+                    {
+                        SdrObject* pCandidate = aIter.Next();
+                        OSL_ENSURE(pCandidate && dynamic_cast< SdrObjGroup* >(pCandidate) ==  nullptr, "SdrObjListIter with SdrIterMode::DeepNoGroups error (!)");
+                        SdrObject* pNewClone(pCandidate->CloneSdrObject(pCandidate->getSdrModelFromSdrObject()));
+
+                        if(pNewClone)
+                        {
+                            InsertObj(pNewClone, false);
+                        }
+                        else
+                        {
+                            OSL_ENSURE(false, "SdrObject::Clone() failed (!)");
+                        }
+                    }
+
+                    // cleanup temporary conversion objects
+                    SdrObject::Free(pConverted);
+                }
+
+                break;
+            }
+        }
+        else
+        {
+            BitmapEx aBitmapEx;
+
+            if(pSdrGrafObj)
+            {
+                aBitmapEx = pSdrGrafObj->GetGraphic().GetBitmapEx();
+            }
+
+            SdrObject::Free(pObj);
+
+            if(!aOldRange.isEmpty())
+            {
+                // clip against ClipRegion
+                const basegfx::B2DPolyPolygon aNewPoly(
+                    basegfx::utils::clipPolyPolygonOnPolyPolygon(
+                        aPoly,
+                        maClip,
+                        true,
+                        !aPoly.isClosed()));
+                const basegfx::B2DRange aNewRange(aNewPoly.getB2DRange());
+
+                if(!aNewRange.isEmpty())
+                {
+                    pObj = new SdrPathObj(
+                        *mpModel,
+                        aNewPoly.isClosed() ? OBJ_POLY : OBJ_PLIN,
+                        aNewPoly);
+
+                    pObj->SetLayer(aOldLayer);
+                    pObj->SetMergedItemSet(aOldItemSet);
+
+                    if(!!aBitmapEx)
+                    {
+                        // aNewRange is inside of aOldRange and defines which part of aBitmapEx is used
+                        const double fScaleX(aBitmapEx.GetSizePixel().Width() / (aOldRange.getWidth() ? aOldRange.getWidth() : 1.0));
+                        const double fScaleY(aBitmapEx.GetSizePixel().Height() / (aOldRange.getHeight() ? aOldRange.getHeight() : 1.0));
+                        basegfx::B2DRange aPixel(aNewRange);
+                        basegfx::B2DHomMatrix aTrans;
+
+                        aTrans.translate(-aOldRange.getMinX(), -aOldRange.getMinY());
+                        aTrans.scale(fScaleX, fScaleY);
+                        aPixel.transform(aTrans);
+
+                        const Size aOrigSizePixel(aBitmapEx.GetSizePixel());
+                        const Point aClipTopLeft(
+                            basegfx::fround(floor(std::max(0.0, aPixel.getMinX()))),
+                            basegfx::fround(floor(std::max(0.0, aPixel.getMinY()))));
+                        const Size aClipSize(
+                            basegfx::fround(ceil(std::min(static_cast<double>(aOrigSizePixel.Width()), aPixel.getWidth()))),
+                            basegfx::fround(ceil(std::min(static_cast<double>(aOrigSizePixel.Height()), aPixel.getHeight()))));
+                        const BitmapEx aClippedBitmap(
+                            aBitmapEx,
+                            aClipTopLeft,
+                            aClipSize);
+
+                        pObj->SetMergedItem(XFillStyleItem(drawing::FillStyle_BITMAP));
+                        pObj->SetMergedItem(XFillBitmapItem(OUString(), Graphic(aClippedBitmap)));
+                        pObj->SetMergedItem(XFillBmpTileItem(false));
+                        pObj->SetMergedItem(XFillBmpStretchItem(true));
+                    }
+                }
+            }
+        }
+    }
+
+    if(pObj)
+    {
+        // #i111954# check object for visibility
+        // used are SdrPathObj, SdrRectObj, SdrCircObj, SdrGrafObj
+        bool bVisible(false);
+
+        if(pObj->HasLineStyle())
+        {
+            bVisible = true;
+        }
+
+        if(!bVisible && pObj->HasFillStyle())
+        {
+            bVisible = true;
+        }
+
+        if(!bVisible)
+        {
+            SdrTextObj* pTextObj = dynamic_cast< SdrTextObj* >(pObj);
+
+            if(pTextObj && pTextObj->HasText())
+            {
+                bVisible = true;
+            }
+        }
+
+        if(!bVisible)
+        {
+            SdrGrafObj* pGrafObj = dynamic_cast< SdrGrafObj* >(pObj);
+
+            if(pGrafObj)
+            {
+                // this may be refined to check if the graphic really is visible. It
+                // is here to ensure that graphic objects without fill, line and text
+                // get created
+                bVisible = true;
+            }
+        }
+
+        if(!bVisible)
+        {
+            SdrObject::Free(pObj);
+        }
+        else
+        {
+            maTmpList.push_back(pObj);
+
+            if(dynamic_cast< SdrPathObj* >(pObj))
+            {
+                const bool bClosed(pObj->IsClosedObj());
+
+                mbLastObjWasPolyWithoutLine = mbNoLine && bClosed;
+                mbLastObjWasLine = !bClosed;
+            }
+            else
+            {
+                mbLastObjWasPolyWithoutLine = false;
+                mbLastObjWasLine = false;
+            }
+        }
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaLineAction const & rAct)
+{
+    // #i73407# reformulation to use new B2DPolygon classes
+    const basegfx::B2DPoint aStart(rAct.GetStartPoint().X(), rAct.GetStartPoint().Y());
+    const basegfx::B2DPoint aEnd(rAct.GetEndPoint().X(), rAct.GetEndPoint().Y());
+
+    if(!aStart.equal(aEnd))
+    {
+        basegfx::B2DPolygon aLine;
+        const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+
+        aLine.append(aStart);
+        aLine.append(aEnd);
+        aLine.transform(aTransform);
+
+        const LineInfo& rLineInfo = rAct.GetLineInfo();
+        const sal_Int32 nNewLineWidth(rLineInfo.GetWidth());
+        bool bCreateLineObject(true);
+
+        if(mbLastObjWasLine && (nNewLineWidth == mnLineWidth) && CheckLastLineMerge(aLine))
+        {
+            bCreateLineObject = false;
+        }
+
+        if(bCreateLineObject)
+        {
+            SdrPathObj* pPath = new SdrPathObj(
+                *mpModel,
+                OBJ_LINE,
+                basegfx::B2DPolyPolygon(aLine));
+            mnLineWidth = nNewLineWidth;
+            maLineJoin = rLineInfo.GetLineJoin();
+            maLineCap = rLineInfo.GetLineCap();
+            maDash = XDash(css::drawing::DashStyle_RECT,
+                rLineInfo.GetDotCount(), rLineInfo.GetDotLen(),
+                rLineInfo.GetDashCount(), rLineInfo.GetDashLen(),
+                rLineInfo.GetDistance());
+            SetAttributes(pPath);
+            mnLineWidth = 0;
+            maLineJoin = basegfx::B2DLineJoin::NONE;
+            maDash = XDash();
+            InsertObj(pPath, false);
+        }
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaRectAction const & rAct)
+{
+    SdrRectObj* pRect = new SdrRectObj(
+        *mpModel,
+        rAct.GetRect());
+    SetAttributes(pRect);
+    InsertObj(pRect);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaRoundRectAction const & rAct)
+{
+    SdrRectObj* pRect = new SdrRectObj(
+        *mpModel,
+        rAct.GetRect());
+    SetAttributes(pRect);
+    long nRad=(rAct.GetHorzRound()+rAct.GetVertRound())/2;
+    if (nRad!=0) {
+        SfxItemSet aSet(*mpLineAttr->GetPool(), svl::Items<SDRATTR_ECKENRADIUS, SDRATTR_ECKENRADIUS>{});
+        aSet.Put(SdrMetricItem(SDRATTR_ECKENRADIUS, nRad));
+        pRect->SetMergedItemSet(aSet);
+    }
+    InsertObj(pRect);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaEllipseAction const & rAct)
+{
+    SdrCircObj* pCirc=new SdrCircObj(
+        *mpModel,
+        SdrCircKind::Full,
+        rAct.GetRect());
+    SetAttributes(pCirc);
+    InsertObj(pCirc);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaArcAction const & rAct)
+{
+    Point aCenter(rAct.GetRect().Center());
+    long nStart=GetAngle(rAct.GetStartPoint()-aCenter);
+    long nEnd=GetAngle(rAct.GetEndPoint()-aCenter);
+    SdrCircObj* pCirc = new SdrCircObj(
+        *mpModel,
+        SdrCircKind::Arc,
+        rAct.GetRect(),nStart,nEnd);
+    SetAttributes(pCirc);
+    InsertObj(pCirc);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaPieAction const & rAct)
+{
+    Point aCenter(rAct.GetRect().Center());
+    long nStart=GetAngle(rAct.GetStartPoint()-aCenter);
+    long nEnd=GetAngle(rAct.GetEndPoint()-aCenter);
+    SdrCircObj* pCirc = new SdrCircObj(
+        *mpModel,
+        SdrCircKind::Section,
+        rAct.GetRect(),
+        nStart,
+        nEnd);
+    SetAttributes(pCirc);
+    InsertObj(pCirc);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaChordAction const & rAct)
+{
+    Point aCenter(rAct.GetRect().Center());
+    long nStart=GetAngle(rAct.GetStartPoint()-aCenter);
+    long nEnd=GetAngle(rAct.GetEndPoint()-aCenter);
+    SdrCircObj* pCirc = new SdrCircObj(
+        *mpModel,
+        SdrCircKind::Cut,
+        rAct.GetRect(),
+        nStart,
+        nEnd);
+    SetAttributes(pCirc);
+    InsertObj(pCirc);
+}
+
+bool ImpSdrGDIMetaFileImport::CheckLastLineMerge(const basegfx::B2DPolygon& rSrcPoly)
+{
+    // #i102706# Do not merge closed polygons
+    if(rSrcPoly.isClosed())
+    {
+        return false;
+    }
+
+    // #i73407# reformulation to use new B2DPolygon classes
+    if(mbLastObjWasLine && (maOldLineColor == mpVD->GetLineColor()) && rSrcPoly.count())
+    {
+        SdrObject* pTmpObj = !maTmpList.empty() ? maTmpList[maTmpList.size() - 1] : nullptr;
+        SdrPathObj* pLastPoly = dynamic_cast< SdrPathObj* >(pTmpObj);
+
+        if(pLastPoly)
+        {
+            if(1 == pLastPoly->GetPathPoly().count())
+            {
+                bool bOk(false);
+                basegfx::B2DPolygon aDstPoly(pLastPoly->GetPathPoly().getB2DPolygon(0));
+
+                // #i102706# Do not merge closed polygons
+                if(aDstPoly.isClosed())
+                {
+                    return false;
+                }
+
+                if(aDstPoly.count())
+                {
+                    const sal_uInt32 nMaxDstPnt(aDstPoly.count() - 1);
+                    const sal_uInt32 nMaxSrcPnt(rSrcPoly.count() - 1);
+
+                    if(aDstPoly.getB2DPoint(nMaxDstPnt) == rSrcPoly.getB2DPoint(0))
+                    {
+                        aDstPoly.append(rSrcPoly, 1, rSrcPoly.count() - 1);
+                        bOk = true;
+                    }
+                    else if(aDstPoly.getB2DPoint(0) == rSrcPoly.getB2DPoint(nMaxSrcPnt))
+                    {
+                        basegfx::B2DPolygon aNew(rSrcPoly);
+                        aNew.append(aDstPoly, 1, aDstPoly.count() - 1);
+                        aDstPoly = aNew;
+                        bOk = true;
+                    }
+                    else if(aDstPoly.getB2DPoint(0) == rSrcPoly.getB2DPoint(0))
+                    {
+                        aDstPoly.flip();
+                        aDstPoly.append(rSrcPoly, 1, rSrcPoly.count() - 1);
+                        bOk = true;
+                    }
+                    else if(aDstPoly.getB2DPoint(nMaxDstPnt) == rSrcPoly.getB2DPoint(nMaxSrcPnt))
+                    {
+                        basegfx::B2DPolygon aNew(rSrcPoly);
+                        aNew.flip();
+                        aDstPoly.append(aNew, 1, aNew.count() - 1);
+                        bOk = true;
+                    }
+                }
+
+                if(bOk)
+                {
+                    pLastPoly->NbcSetPathPoly(basegfx::B2DPolyPolygon(aDstPoly));
+                }
+
+                return bOk;
+            }
+        }
+    }
+
+    return false;
+}
+
+bool ImpSdrGDIMetaFileImport::CheckLastPolyLineAndFillMerge(const basegfx::B2DPolyPolygon & rPolyPolygon)
+{
+    // #i73407# reformulation to use new B2DPolygon classes
+    if(mbLastObjWasPolyWithoutLine)
+    {
+        SdrObject* pTmpObj = !maTmpList.empty() ? maTmpList[maTmpList.size() - 1] : nullptr;
+        SdrPathObj* pLastPoly = dynamic_cast< SdrPathObj* >(pTmpObj);
+
+        if(pLastPoly)
+        {
+            if(pLastPoly->GetPathPoly() == rPolyPolygon)
+            {
+                SetAttributes(nullptr);
+
+                if(!mbNoLine && mbNoFill)
+                {
+                    pLastPoly->SetMergedItemSet(*mpLineAttr);
+
+                    return true;
+                }
+            }
+        }
+    }
+
+    return false;
+}
+
+void ImpSdrGDIMetaFileImport::checkClip()
+{
+    if(mpVD->IsClipRegion())
+    {
+        maClip = mpVD->GetClipRegion().GetAsB2DPolyPolygon();
+
+        if(isClip())
+        {
+            const basegfx::B2DHomMatrix aTransform(
+                basegfx::utils::createScaleTranslateB2DHomMatrix(
+                    mfScaleX,
+                    mfScaleY,
+                    maOfs.X(),
+                    maOfs.Y()));
+
+            maClip.transform(aTransform);
+        }
+    }
+}
+
+bool ImpSdrGDIMetaFileImport::isClip() const
+{
+    return !maClip.getB2DRange().isEmpty();
+}
+
+void ImpSdrGDIMetaFileImport::DoAction( MetaPolyLineAction const & rAct )
+{
+    // #i73407# reformulation to use new B2DPolygon classes
+    basegfx::B2DPolygon aSource(rAct.GetPolygon().getB2DPolygon());
+
+    if(aSource.count())
+    {
+        const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+        aSource.transform(aTransform);
+    }
+
+    const LineInfo& rLineInfo = rAct.GetLineInfo();
+    const sal_Int32 nNewLineWidth(rLineInfo.GetWidth());
+    bool bCreateLineObject(true);
+
+    if(mbLastObjWasLine && (nNewLineWidth == mnLineWidth) && CheckLastLineMerge(aSource))
+    {
+        bCreateLineObject = false;
+    }
+    else if(mbLastObjWasPolyWithoutLine && CheckLastPolyLineAndFillMerge(basegfx::B2DPolyPolygon(aSource)))
+    {
+        bCreateLineObject = false;
+    }
+
+    if(bCreateLineObject)
+    {
+        SdrPathObj* pPath = new SdrPathObj(
+            *mpModel,
+            aSource.isClosed() ? OBJ_POLY : OBJ_PLIN,
+            basegfx::B2DPolyPolygon(aSource));
+        mnLineWidth = nNewLineWidth;
+        maLineJoin = rLineInfo.GetLineJoin();
+        maLineCap = rLineInfo.GetLineCap();
+        maDash = XDash(css::drawing::DashStyle_RECT,
+            rLineInfo.GetDotCount(), rLineInfo.GetDotLen(),
+            rLineInfo.GetDashCount(), rLineInfo.GetDashLen(),
+            rLineInfo.GetDistance());
+        SetAttributes(pPath);
+        mnLineWidth = 0;
+        maLineJoin = basegfx::B2DLineJoin::NONE;
+        maDash = XDash();
+        InsertObj(pPath, false);
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction( MetaPolygonAction const & rAct )
+{
+    // #i73407# reformulation to use new B2DPolygon classes
+    basegfx::B2DPolygon aSource(rAct.GetPolygon().getB2DPolygon());
+
+    if(aSource.count())
+    {
+        const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+        aSource.transform(aTransform);
+
+        if(!mbLastObjWasPolyWithoutLine || !CheckLastPolyLineAndFillMerge(basegfx::B2DPolyPolygon(aSource)))
+        {
+            // #i73407# make sure polygon is closed, it's a filled primitive
+            aSource.setClosed(true);
+            SdrPathObj* pPath = new SdrPathObj(
+                *mpModel,
+                OBJ_POLY,
+                basegfx::B2DPolyPolygon(aSource));
+            SetAttributes(pPath);
+            InsertObj(pPath, false);
+        }
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaPolyPolygonAction const & rAct)
+{
+    // #i73407# reformulation to use new B2DPolygon classes
+    basegfx::B2DPolyPolygon aSource(rAct.GetPolyPolygon().getB2DPolyPolygon());
+
+    if(aSource.count())
+    {
+        const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+        aSource.transform(aTransform);
+
+        if(!mbLastObjWasPolyWithoutLine || !CheckLastPolyLineAndFillMerge(aSource))
+        {
+            // #i73407# make sure polygon is closed, it's a filled primitive
+            aSource.setClosed(true);
+            SdrPathObj* pPath = new SdrPathObj(
+                *mpModel,
+                OBJ_POLY,
+                aSource);
+            SetAttributes(pPath);
+            InsertObj(pPath, false);
+        }
+    }
+}
+
+void ImpSdrGDIMetaFileImport::ImportText( const Point& rPos, const OUString& rStr, const MetaAction& rAct )
+{
+    // calc text box size, add 5% to make it fit safely
+
+    FontMetric aFontMetric( mpVD->GetFontMetric() );
+    vcl::Font aFnt( mpVD->GetFont() );
+    FontAlign eAlg( aFnt.GetAlignment() );
+
+    sal_Int32 nTextWidth = static_cast<sal_Int32>( mpVD->GetTextWidth( rStr ) * mfScaleX );
+    sal_Int32 nTextHeight = static_cast<sal_Int32>( mpVD->GetTextHeight() * mfScaleY );
+
+    Point aPos( FRound(rPos.X() * mfScaleX + maOfs.X()), FRound(rPos.Y() * mfScaleY + maOfs.Y()) );
+    Size aSize( nTextWidth, nTextHeight );
+
+    if ( eAlg == ALIGN_BASELINE )
+        aPos.AdjustY( -(FRound(aFontMetric.GetAscent() * mfScaleY)) );
+    else if ( eAlg == ALIGN_BOTTOM )
+        aPos.AdjustY( -nTextHeight );
+
+    tools::Rectangle aTextRect( aPos, aSize );
+    SdrRectObj* pText = new SdrRectObj(
+        *mpModel,
+        OBJ_TEXT,
+        aTextRect);
+
+    pText->SetMergedItem ( makeSdrTextUpperDistItem (0));
+    pText->SetMergedItem ( makeSdrTextLowerDistItem (0));
+    pText->SetMergedItem ( makeSdrTextRightDistItem (0));
+    pText->SetMergedItem ( makeSdrTextLeftDistItem (0));
+
+    if ( aFnt.GetAverageFontWidth() || ( rAct.GetType() == MetaActionType::STRETCHTEXT ) )
+    {
+        pText->ClearMergedItem( SDRATTR_TEXT_AUTOGROWWIDTH );
+        pText->SetMergedItem( makeSdrTextAutoGrowHeightItem( false ) );
+        // don't let the margins eat the space needed for the text
+        pText->SetMergedItem( SdrTextFitToSizeTypeItem(drawing::TextFitToSizeType_ALLLINES) );
+    }
+    else
+    {
+        pText->SetMergedItem( makeSdrTextAutoGrowWidthItem( true ) );
+    }
+
+    pText->SetLayer(mnLayer);
+    pText->NbcSetText( rStr );
+    SetAttributes( pText, true );
+    pText->SetSnapRect( aTextRect );
+
+    if (!aFnt.IsTransparent())
+    {
+        SfxItemSet aAttr(*mpFillAttr->GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+        aAttr.Put(XFillStyleItem(drawing::FillStyle_SOLID));
+        aAttr.Put(XFillColorItem(OUString(), aFnt.GetFillColor()));
+        pText->SetMergedItemSet(aAttr);
+    }
+    sal_uInt32 nAngle = aFnt.GetOrientation();
+    if ( nAngle )
+    {
+        nAngle*=10;
+        double a = nAngle * F_PI18000;
+        double nSin=sin(a);
+        double nCos=cos(a);
+        pText->NbcRotate(aPos,nAngle,nSin,nCos);
+    }
+    InsertObj( pText, false );
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaTextAction const & rAct)
+{
+    OUString aStr(rAct.GetText());
+    aStr = aStr.copy(rAct.GetIndex(), rAct.GetLen());
+    ImportText( rAct.GetPoint(), aStr, rAct );
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaTextArrayAction const & rAct)
+{
+    OUString aStr(rAct.GetText());
+    aStr = aStr.copy(rAct.GetIndex(), rAct.GetLen());
+    ImportText( rAct.GetPoint(), aStr, rAct );
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaStretchTextAction const & rAct)
+{
+    OUString aStr(rAct.GetText());
+    aStr = aStr.copy(rAct.GetIndex(), rAct.GetLen());
+    ImportText( rAct.GetPoint(), aStr, rAct );
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaBmpAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetPoint(),rAct.GetBitmap().GetSizePixel());
+    aRect.AdjustRight( 1 ); aRect.AdjustBottom( 1 );
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        Graphic(rAct.GetBitmap()),
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaBmpScaleAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetPoint(),rAct.GetSize());
+    aRect.AdjustRight( 1 ); aRect.AdjustBottom( 1 );
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        Graphic(rAct.GetBitmap()),
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaBmpExAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetPoint(),rAct.GetBitmapEx().GetSizePixel());
+    aRect.AdjustRight( 1 ); aRect.AdjustBottom( 1 );
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        rAct.GetBitmapEx(),
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaBmpExScaleAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetPoint(),rAct.GetSize());
+    aRect.AdjustRight( 1 ); aRect.AdjustBottom( 1 );
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        rAct.GetBitmapEx(),
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+
+void ImpSdrGDIMetaFileImport::DoAction( MetaHatchAction const & rAct )
+{
+    // #i73407# reformulation to use new B2DPolygon classes
+    basegfx::B2DPolyPolygon aSource(rAct.GetPolyPolygon().getB2DPolyPolygon());
+
+    if(aSource.count())
+    {
+        const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+        aSource.transform(aTransform);
+
+        if(!mbLastObjWasPolyWithoutLine || !CheckLastPolyLineAndFillMerge(aSource))
+        {
+            const Hatch& rHatch = rAct.GetHatch();
+            SdrPathObj* pPath = new SdrPathObj(
+                *mpModel,
+                OBJ_POLY,
+                aSource);
+            // #i125211# Use the ranges from the SdrObject to create a new empty SfxItemSet
+            SfxItemSet aHatchAttr(mpModel->GetItemPool(), pPath->GetMergedItemSet().GetRanges());
+            css::drawing::HatchStyle eStyle;
+
+            switch(rHatch.GetStyle())
+            {
+                case HatchStyle::Triple :
+                {
+                    eStyle = css::drawing::HatchStyle_TRIPLE;
+                    break;
+                }
+
+                case HatchStyle::Double :
+                {
+                    eStyle = css::drawing::HatchStyle_DOUBLE;
+                    break;
+                }
+
+                default:
+                {
+                    eStyle = css::drawing::HatchStyle_SINGLE;
+                    break;
+                }
+            }
+
+            SetAttributes(pPath);
+            aHatchAttr.Put(XFillStyleItem(drawing::FillStyle_HATCH));
+            aHatchAttr.Put(XFillHatchItem(XHatch(rHatch.GetColor(), eStyle, rHatch.GetDistance(), rHatch.GetAngle())));
+            pPath->SetMergedItemSet(aHatchAttr);
+
+            InsertObj(pPath, false);
+        }
+    }
+}
+
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaLineColorAction& rAct)
+{
+    rAct.Execute(mpVD);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaMapModeAction& rAct)
+{
+    MapScaling();
+    rAct.Execute(mpVD);
+    mbLastObjWasPolyWithoutLine = false;
+    mbLastObjWasLine = false;
+}
+
+void ImpSdrGDIMetaFileImport::MapScaling()
+{
+    const size_t nCount(maTmpList.size());
+    const MapMode& rMap = mpVD->GetMapMode();
+    Point aMapOrg( rMap.GetOrigin() );
+    bool bMov2(aMapOrg.X() != 0 || aMapOrg.Y() != 0);
+
+    if(bMov2)
+    {
+        for(size_t i = mnMapScalingOfs; i < nCount; i++)
+        {
+            SdrObject* pObj = maTmpList[i];
+
+            pObj->NbcMove(Size(aMapOrg.X(), aMapOrg.Y()));
+        }
+    }
+
+    mnMapScalingOfs = nCount;
+}
+
+
+void ImpSdrGDIMetaFileImport::DoAction( MetaCommentAction const & rAct, GDIMetaFile const & rMtf, sal_uLong& a) // GDIMetaFile* pMtf )
+{
+    bool aSkipComment = false;
+
+    if (a < rMtf.GetActionSize() && rAct.GetComment().equalsIgnoreAsciiCase("XGRAD_SEQ_BEGIN"))
+    {
+        // #i125211# Check if next action is a MetaGradientExAction
+        MetaGradientExAction* pAct = dynamic_cast< MetaGradientExAction* >(rMtf.GetAction(a + 1));
+
+        if( pAct && pAct->GetType() == MetaActionType::GRADIENTEX )
+        {
+            // #i73407# reformulation to use new B2DPolygon classes
+            basegfx::B2DPolyPolygon aSource(pAct->GetPolyPolygon().getB2DPolyPolygon());
+
+            if(aSource.count())
+            {
+                if(!mbLastObjWasPolyWithoutLine || !CheckLastPolyLineAndFillMerge(aSource))
+                {
+                    const Gradient& rGrad = pAct->GetGradient();
+                    SdrPathObj* pPath = new SdrPathObj(
+                        *mpModel,
+                        OBJ_POLY,
+                        aSource);
+                    // #i125211# Use the ranges from the SdrObject to create a new empty SfxItemSet
+                    SfxItemSet aGradAttr(mpModel->GetItemPool(), pPath->GetMergedItemSet().GetRanges());
+                    XGradient aXGradient;
+
+                    aXGradient.SetGradientStyle(static_cast<css::awt::GradientStyle>(rGrad.GetStyle()));
+                    aXGradient.SetStartColor(rGrad.GetStartColor());
+                    aXGradient.SetEndColor(rGrad.GetEndColor());
+                    aXGradient.SetAngle(rGrad.GetAngle());
+                    aXGradient.SetBorder(rGrad.GetBorder());
+                    aXGradient.SetXOffset(rGrad.GetOfsX());
+                    aXGradient.SetYOffset(rGrad.GetOfsY());
+                    aXGradient.SetStartIntens(rGrad.GetStartIntensity());
+                    aXGradient.SetEndIntens(rGrad.GetEndIntensity());
+                    aXGradient.SetSteps(rGrad.GetSteps());
+
+                    // no need to use SetAttributes(..) here since line and fill style
+                    // need to be set individually
+                    // SetAttributes(pPath);
+
+                    // switch line off; if there was one there will be a
+                    // MetaActionType::POLYLINE following creating another object
+                    aGradAttr.Put(XLineStyleItem(drawing::LineStyle_NONE));
+
+                    // add detected gradient fillstyle
+                    aGradAttr.Put(XFillStyleItem(drawing::FillStyle_GRADIENT));
+                    aGradAttr.Put(XFillGradientItem(aXGradient));
+
+                    pPath->SetMergedItemSet(aGradAttr);
+
+                    InsertObj(pPath);
+                }
+            }
+
+            aSkipComment = true;
+        }
+    }
+
+    if(aSkipComment)
+    {
+        // #i125211# forward until closing MetaCommentAction
+        MetaAction* pSkipAct = rMtf.GetAction(++a);
+
+        while( pSkipAct
+            && ((pSkipAct->GetType() != MetaActionType::COMMENT )
+                || !(static_cast<MetaCommentAction*>(pSkipAct)->GetComment().equalsIgnoreAsciiCase("XGRAD_SEQ_END"))))
+        {
+            pSkipAct = rMtf.GetAction(++a);
+        }
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaTextRectAction const & rAct)
+{
+    GDIMetaFile aTemp;
+
+    mpVD->AddTextRectActions(rAct.GetRect(), rAct.GetText(), rAct.GetStyle(), aTemp);
+    DoLoopActions(aTemp, nullptr, nullptr);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaBmpScalePartAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetDestPoint(), rAct.GetDestSize());
+    Bitmap aBitmap(rAct.GetBitmap());
+
+    aRect.AdjustRight( 1 );
+    aRect.AdjustBottom( 1 );
+    aBitmap.Crop(tools::Rectangle(rAct.GetSrcPoint(), rAct.GetSrcSize()));
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        aBitmap,
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaBmpExScalePartAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetDestPoint(),rAct.GetDestSize());
+    BitmapEx aBitmapEx(rAct.GetBitmapEx());
+
+    aRect.AdjustRight( 1 );
+    aRect.AdjustBottom( 1 );
+    aBitmapEx.Crop(tools::Rectangle(rAct.GetSrcPoint(), rAct.GetSrcSize()));
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        aBitmapEx,
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaMaskAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetPoint(), rAct.GetBitmap().GetSizePixel());
+    BitmapEx aBitmapEx(rAct.GetBitmap(), rAct.GetColor());
+
+    aRect.AdjustRight( 1 ); aRect.AdjustBottom( 1 );
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        aBitmapEx,
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaMaskScaleAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetPoint(), rAct.GetSize());
+    BitmapEx aBitmapEx(rAct.GetBitmap(), rAct.GetColor());
+
+    aRect.AdjustRight( 1 ); aRect.AdjustBottom( 1 );
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        aBitmapEx,
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaMaskScalePartAction const & rAct)
+{
+    tools::Rectangle aRect(rAct.GetDestPoint(), rAct.GetDestSize());
+    BitmapEx aBitmapEx(rAct.GetBitmap(), rAct.GetColor());
+
+    aRect.AdjustRight( 1 ); aRect.AdjustBottom( 1 );
+    aBitmapEx.Crop(tools::Rectangle(rAct.GetSrcPoint(), rAct.GetSrcSize()));
+    SdrGrafObj* pGraf = new SdrGrafObj(
+        *mpModel,
+        aBitmapEx,
+        aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+namespace
+{
+    css::awt::GradientStyle getXGradientStyleFromGradientStyle(const GradientStyle& rGradientStyle)
+    {
+        css::awt::GradientStyle aXGradientStyle(css::awt::GradientStyle_LINEAR);
+
+        switch(rGradientStyle)
+        {
+            case GradientStyle::Linear: aXGradientStyle = css::awt::GradientStyle_LINEAR; break;
+            case GradientStyle::Axial: aXGradientStyle = css::awt::GradientStyle_AXIAL; break;
+            case GradientStyle::Radial: aXGradientStyle = css::awt::GradientStyle_RADIAL; break;
+            case GradientStyle::Elliptical: aXGradientStyle = css::awt::GradientStyle_ELLIPTICAL; break;
+            case GradientStyle::Square: aXGradientStyle = css::awt::GradientStyle_SQUARE; break;
+            case GradientStyle::Rect: aXGradientStyle = css::awt::GradientStyle_RECT; break;
+
+            // Needed due to GradientStyle::FORCE_EQUAL_SIZE; this again is needed
+            // to force the enum defines in VCL to a defined size for the compilers,
+            // so despite it is never used it cannot be removed (would break the
+            // API implementation probably).
+            case GradientStyle::FORCE_EQUAL_SIZE: break;
+            default:
+                break;
+        }
+
+        return aXGradientStyle;
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaGradientAction const & rAct)
+{
+    basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(rAct.GetRect());
+
+    if(aRange.isEmpty())
+        return;
+
+    const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+    aRange.transform(aTransform);
+    const Gradient& rGradient = rAct.GetGradient();
+    SdrRectObj* pRect = new SdrRectObj(
+        *mpModel,
+        tools::Rectangle(
+            floor(aRange.getMinX()),
+            floor(aRange.getMinY()),
+            ceil(aRange.getMaxX()),
+            ceil(aRange.getMaxY())));
+    // #i125211# Use the ranges from the SdrObject to create a new empty SfxItemSet
+    SfxItemSet aGradientAttr(mpModel->GetItemPool(), pRect->GetMergedItemSet().GetRanges());
+    const css::awt::GradientStyle aXGradientStyle(getXGradientStyleFromGradientStyle(rGradient.GetStyle()));
+    const XFillGradientItem aXFillGradientItem(
+        XGradient(
+            rGradient.GetStartColor(),
+            rGradient.GetEndColor(),
+            aXGradientStyle,
+            rGradient.GetAngle(),
+            rGradient.GetOfsX(),
+            rGradient.GetOfsY(),
+            rGradient.GetBorder(),
+            rGradient.GetStartIntensity(),
+            rGradient.GetEndIntensity(),
+            rGradient.GetSteps()));
+
+    SetAttributes(pRect);
+    aGradientAttr.Put(XFillStyleItem(drawing::FillStyle_GRADIENT)); // #i125211#
+    aGradientAttr.Put(aXFillGradientItem);
+    pRect->SetMergedItemSet(aGradientAttr);
+
+    InsertObj(pRect, false);
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaTransparentAction const & rAct)
+{
+    basegfx::B2DPolyPolygon aSource(rAct.GetPolyPolygon().getB2DPolyPolygon());
+
+    if(aSource.count())
+    {
+        const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+        aSource.transform(aTransform);
+        aSource.setClosed(true);
+
+        SdrPathObj* pPath = new SdrPathObj(
+            *mpModel,
+            OBJ_POLY,
+            aSource);
+        SetAttributes(pPath);
+        pPath->SetMergedItem(XFillTransparenceItem(rAct.GetTransparence()));
+        InsertObj(pPath, false);
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaGradientExAction const & rAct)
+{
+    basegfx::B2DPolyPolygon aSource(rAct.GetPolyPolygon().getB2DPolyPolygon());
+
+    if(aSource.count())
+    {
+        const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+        aSource.transform(aTransform);
+
+        if(!mbLastObjWasPolyWithoutLine || !CheckLastPolyLineAndFillMerge(aSource))
+        {
+            const Gradient& rGradient = rAct.GetGradient();
+            SdrPathObj* pPath = new SdrPathObj(
+                *mpModel,
+                OBJ_POLY,
+                aSource);
+            // #i125211# Use the ranges from the SdrObject to create a new empty SfxItemSet
+            SfxItemSet aGradientAttr(mpModel->GetItemPool(), pPath->GetMergedItemSet().GetRanges());
+            const css::awt::GradientStyle aXGradientStyle(getXGradientStyleFromGradientStyle(rGradient.GetStyle()));
+            const XFillGradientItem aXFillGradientItem(
+                XGradient(
+                    rGradient.GetStartColor(),
+                    rGradient.GetEndColor(),
+                    aXGradientStyle,
+                    rGradient.GetAngle(),
+                    rGradient.GetOfsX(),
+                    rGradient.GetOfsY(),
+                    rGradient.GetBorder(),
+                    rGradient.GetStartIntensity(),
+                    rGradient.GetEndIntensity(),
+                    rGradient.GetSteps()));
+
+            SetAttributes(pPath);
+            aGradientAttr.Put(XFillStyleItem(drawing::FillStyle_GRADIENT)); // #i125211#
+            aGradientAttr.Put(aXFillGradientItem);
+            pPath->SetMergedItemSet(aGradientAttr);
+
+            InsertObj(pPath, false);
+        }
+    }
+}
+
+void ImpSdrGDIMetaFileImport::DoAction(MetaFloatTransparentAction const & rAct)
+{
+    const GDIMetaFile& rMtf = rAct.GetGDIMetaFile();
+
+    if(!rMtf.GetActionSize())
+        return;
+
+    const tools::Rectangle aRect(rAct.GetPoint(),rAct.GetSize());
+
+    // convert metafile sub-content to BitmapEx
+    BitmapEx aBitmapEx(
+        convertMetafileToBitmapEx(
+            rMtf,
+            vcl::unotools::b2DRectangleFromRectangle(aRect),
+            125000));
+
+    // handle colors
+    const Gradient& rGradient = rAct.GetGradient();
+    basegfx::BColor aStart(rGradient.GetStartColor().getBColor());
+    basegfx::BColor aEnd(rGradient.GetEndColor().getBColor());
+
+    if(100 != rGradient.GetStartIntensity())
+    {
+        aStart *= static_cast<double>(rGradient.GetStartIntensity()) / 100.0;
+    }
+
+    if(100 != rGradient.GetEndIntensity())
+    {
+        aEnd *= static_cast<double>(rGradient.GetEndIntensity()) / 100.0;
+    }
+
+    const bool bEqualColors(aStart == aEnd);
+    const bool bNoSteps(1 == rGradient.GetSteps());
+    bool bCreateObject(true);
+    bool bHasNewMask(false);
+    AlphaMask aNewMask;
+    double fTransparence(0.0);
+    bool bFixedTransparence(false);
+
+    if(bEqualColors || bNoSteps)
+    {
+        // single transparence
+        const basegfx::BColor aMedium(basegfx::average(aStart, aEnd));
+        fTransparence = aMedium.luminance();
+
+        if(basegfx::fTools::lessOrEqual(fTransparence, 0.0))
+        {
+            // no transparence needed, all done
+        }
+        else if(basegfx::fTools::moreOrEqual(fTransparence, 1.0))
+        {
+            // all transparent, no object
+            bCreateObject = false;
+        }
+        else
+        {
+            // 0.0 < transparence < 1.0, apply fixed transparence
+            bFixedTransparence = true;
+        }
+    }
+    else
+    {
+        // gradient transparence
+        ScopedVclPtrInstance< VirtualDevice > pVDev;
+
+        pVDev->SetOutputSizePixel(aBitmapEx.GetBitmap().GetSizePixel());
+        pVDev->DrawGradient(tools::Rectangle(Point(0, 0), pVDev->GetOutputSizePixel()), rGradient);
+
+        aNewMask = AlphaMask(pVDev->GetBitmap(Point(0, 0), pVDev->GetOutputSizePixel()));
+        bHasNewMask = true;
+    }
+
+    if(bCreateObject)
+    {
+        if(bHasNewMask || bFixedTransparence)
+        {
+            if(!aBitmapEx.IsAlpha() && !aBitmapEx.IsTransparent())
+            {
+                // no transparence yet, apply new one
+                if(bFixedTransparence)
+                {
+                    sal_uInt8 aAlpha(basegfx::fround(fTransparence * 255.0));
+
+                    aNewMask = AlphaMask(aBitmapEx.GetBitmap().GetSizePixel(), &aAlpha);
+                }
+
+                aBitmapEx = BitmapEx(aBitmapEx.GetBitmap(), aNewMask);
+            }
+            else
+            {
+                vcl::bitmap::DrawAlphaBitmapAndAlphaGradient(aBitmapEx, bFixedTransparence, fTransparence, aNewMask);
+            }
+        }
+
+        // create and add object
+        SdrGrafObj* pGraf = new SdrGrafObj(
+            *mpModel,
+            aBitmapEx,
+            aRect);
+
+        // for MetaFloatTransparentAction, do not use SetAttributes(...)
+        // since these metafile content is not used to draw line/fill
+        // dependent of these setting at the device content
+        pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+        pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+        InsertObj(pGraf);
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdfmtf.hxx b/svx/source/svdraw/svdfmtf.hxx
new file mode 100644
index 000000000..0e788bcd5
--- /dev/null
+++ b/svx/source/svdraw/svdfmtf.hxx
@@ -0,0 +1,173 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_SVX_SOURCE_SVDRAW_SVDFMTF_HXX
+#define INCLUDED_SVX_SOURCE_SVDRAW_SVDFMTF_HXX
+
+#include <sal/config.h>
+
+#include <memory>
+
+#include <svl/itemset.hxx>
+#include <tools/fract.hxx>
+#include <vcl/metaact.hxx>
+#include <vcl/virdev.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/xdash.hxx>
+
+// Forward Declarations
+
+
+class SfxItemSet;
+class SdrObjList;
+class SdrModel;
+class SdrPage;
+class SdrObject;
+class SvdProgressInfo;
+
+
+// Helper Class ImpSdrGDIMetaFileImport
+class ImpSdrGDIMetaFileImport final
+{
+    ::std::vector< SdrObject* > maTmpList;
+    ScopedVclPtr<VirtualDevice> mpVD;
+    tools::Rectangle                   maScaleRect;
+    size_t                      mnMapScalingOfs; // from here on, not edited with MapScaling
+    std::unique_ptr<SfxItemSet> mpLineAttr;
+    std::unique_ptr<SfxItemSet> mpFillAttr;
+    std::unique_ptr<SfxItemSet> mpTextAttr;
+    SdrModel*                   mpModel;
+    SdrLayerID                  mnLayer;
+    Color                       maOldLineColor;
+    sal_Int32                   mnLineWidth;
+    basegfx::B2DLineJoin        maLineJoin;
+    css::drawing::LineCap       maLineCap;
+    XDash                       maDash;
+
+    bool                        mbMov;
+    bool                        mbSize;
+    Point                       maOfs;
+    double                      mfScaleX;
+    double                      mfScaleY;
+    Fraction                    maScaleX;
+    Fraction                    maScaleY;
+
+    bool                        mbFntDirty;
+
+    // to optimize (PenNULL,Brush,DrawPoly),(Pen,BrushNULL,DrawPoly) -> two-in-one
+    bool                        mbLastObjWasPolyWithoutLine;
+    bool                        mbNoLine;
+    bool                        mbNoFill;
+
+    // to optimize multiple lines into a Polyline
+    bool                        mbLastObjWasLine;
+
+    // clipregion
+    basegfx::B2DPolyPolygon     maClip;
+
+    // check for clip and evtl. fill maClip
+    void checkClip();
+    bool isClip() const;
+
+    // actions
+    void DoAction(MetaLineAction const      & rAct);
+    void DoAction(MetaRectAction const      & rAct);
+    void DoAction(MetaRoundRectAction const & rAct);
+    void DoAction(MetaEllipseAction const   & rAct);
+    void DoAction(MetaArcAction const       & rAct);
+    void DoAction(MetaPieAction const       & rAct);
+    void DoAction(MetaChordAction const     & rAct);
+    void DoAction(MetaPolyLineAction const  & rAct);
+    void DoAction(MetaPolygonAction const   & rAct);
+    void DoAction(MetaPolyPolygonAction const & rAct);
+    void DoAction(MetaTextAction const      & rAct);
+    void DoAction(MetaTextArrayAction const & rAct);
+    void DoAction(MetaStretchTextAction const & rAct);
+    void DoAction(MetaBmpAction const       & rAct);
+    void DoAction(MetaBmpScaleAction const  & rAct);
+    void DoAction(MetaBmpExAction const     & rAct);
+    void DoAction(MetaBmpExScaleAction const & rAct);
+    void DoAction(MetaHatchAction const     & rAct);
+    void DoAction(MetaLineColorAction       & rAct);
+    void DoAction(MetaMapModeAction         & rAct);
+    void DoAction(MetaFillColorAction       & rAct) { rAct.Execute(mpVD); }
+    void DoAction(MetaTextColorAction       & rAct) { rAct.Execute(mpVD); }
+    void DoAction(MetaTextFillColorAction   & rAct) { rAct.Execute(mpVD); }
+    void DoAction(MetaFontAction            & rAct) { rAct.Execute(mpVD); mbFntDirty = true; }
+    void DoAction(MetaTextAlignAction       & rAct) { rAct.Execute(mpVD); mbFntDirty = true; }
+    void DoAction(MetaClipRegionAction      & rAct) { rAct.Execute(mpVD); checkClip(); }
+    void DoAction(MetaRasterOpAction        & rAct) { rAct.Execute(mpVD); }
+    void DoAction(MetaPushAction            & rAct) { rAct.Execute(mpVD); checkClip(); }
+    void DoAction(MetaPopAction             & rAct) { rAct.Execute(mpVD); mbFntDirty = true; checkClip(); }
+    void DoAction(MetaMoveClipRegionAction  & rAct) { rAct.Execute(mpVD); checkClip(); }
+    void DoAction(MetaISectRectClipRegionAction& rAct) { rAct.Execute(mpVD); checkClip(); }
+    void DoAction(MetaISectRegionClipRegionAction& rAct) { rAct.Execute(mpVD); checkClip(); }
+
+    // #i125211# The MetaCommentAction needs to advance (if used), thus
+    // give current metafile and index which may be changed
+    void DoAction(MetaCommentAction const & rAct, GDIMetaFile const & rMtf, sal_uLong& a);
+
+    // missing actions added
+    void DoAction(MetaTextRectAction const & rAct);
+    void DoAction(MetaBmpScalePartAction const & rAct);
+    void DoAction(MetaBmpExScalePartAction const & rAct);
+    void DoAction(MetaMaskAction const & rAct);
+    void DoAction(MetaMaskScaleAction const & rAct);
+    void DoAction(MetaMaskScalePartAction const & rAct);
+    void DoAction(MetaGradientAction const & rAct);
+    void DoAction(MetaTransparentAction const & rAct);
+    void DoAction(MetaRefPointAction& rAct)  { rAct.Execute(mpVD); }
+    void DoAction(MetaTextLineColorAction& rAct)  { rAct.Execute(mpVD); mbFntDirty = true; }
+    void DoAction(MetaFloatTransparentAction const & rAct);
+    void DoAction(MetaGradientExAction const & rAct);
+    void DoAction(MetaLayoutModeAction& rAct)  { rAct.Execute(mpVD); mbFntDirty = true; }
+    void DoAction(MetaTextLanguageAction& rAct)  { rAct.Execute(mpVD); mbFntDirty = true; }
+    void DoAction(MetaOverlineColorAction& rAct)  { rAct.Execute(mpVD); mbFntDirty = true; }
+
+    void ImportText(const Point& rPos, const OUString& rStr, const MetaAction& rAct);
+    void SetAttributes(SdrObject* pObj, bool bForceTextAttr = false);
+    void InsertObj(SdrObject* pObj, bool bScale = true);
+    void MapScaling();
+
+    // #i73407# reformulation to use new B2DPolygon classes
+    bool CheckLastLineMerge(const basegfx::B2DPolygon& rSrcPoly);
+    bool CheckLastPolyLineAndFillMerge(const basegfx::B2DPolyPolygon& rPolyPolygon);
+
+    void DoLoopActions(GDIMetaFile const & rMtf, SvdProgressInfo* pProgrInfo, sal_uInt32* pActionsToReport);
+
+    // Copy assignment is forbidden and not implemented.
+    ImpSdrGDIMetaFileImport (const ImpSdrGDIMetaFileImport &) = delete;
+    ImpSdrGDIMetaFileImport & operator= (const ImpSdrGDIMetaFileImport &) = delete;
+
+public:
+    ImpSdrGDIMetaFileImport(
+        SdrModel& rModel,
+        SdrLayerID nLay,
+        const tools::Rectangle& rRect);
+
+    size_t DoImport(
+        const GDIMetaFile& rMtf,
+        SdrObjList& rDestList,
+        size_t nInsPos,
+        SvdProgressInfo* pProgrInfo = nullptr);
+};
+
+#endif // INCLUDED_SVX_SOURCE_SVDRAW_SVDFMTF_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdglev.cxx b/svx/source/svdraw/svdglev.cxx
new file mode 100644
index 000000000..444517a97
--- /dev/null
+++ b/svx/source/svdraw/svdglev.cxx
@@ -0,0 +1,399 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdglev.hxx>
+#include <math.h>
+
+#include <svx/svdundo.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/svdglue.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdobj.hxx>
+
+SdrGlueEditView::SdrGlueEditView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrPolyEditView(rSdrModel, pOut)
+{
+}
+
+SdrGlueEditView::~SdrGlueEditView()
+{
+}
+
+void SdrGlueEditView::ImpDoMarkedGluePoints(PGlueDoFunc pDoFunc, bool bConst, const void* p1, const void* p2, const void* p3, const void* p4)
+{
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        const SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+        if (!rPts.empty())
+        {
+            SdrGluePointList* pGPL=nullptr;
+            if (bConst) {
+                const SdrGluePointList* pConstGPL=pObj->GetGluePointList();
+                pGPL=const_cast<SdrGluePointList*>(pConstGPL);
+            } else {
+                pGPL=pObj->ForceGluePointList();
+            }
+            if (pGPL!=nullptr)
+            {
+                if(!bConst && IsUndoEnabled() )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+
+                for(sal_uInt16 nPtId : rPts)
+                {
+                    sal_uInt16 nGlueIdx=pGPL->FindGluePoint(nPtId);
+                    if (nGlueIdx!=SDRGLUEPOINT_NOTFOUND)
+                    {
+                        SdrGluePoint& rGP=(*pGPL)[nGlueIdx];
+                        (*pDoFunc)(rGP,pObj,p1,p2,p3,p4);
+                    }
+                }
+                if (!bConst)
+                {
+                    pObj->SetChanged();
+                    pObj->BroadcastObjectChange();
+                }
+            }
+        }
+    }
+    if (!bConst && nMarkCount!=0) mpModel->SetChanged();
+}
+
+
+static void ImpGetEscDir(SdrGluePoint & rGP, const SdrObject* /*pObj*/, const void* pbFirst, const void* pnThisEsc, const void* pnRet, const void*)
+{
+    TriState& nRet=*const_cast<TriState *>(static_cast<TriState const *>(pnRet));
+    if (nRet!=TRISTATE_INDET) {
+        SdrEscapeDirection nEsc = rGP.GetEscDir();
+        bool bOn = bool(nEsc & *static_cast<SdrEscapeDirection const *>(pnThisEsc));
+        bool& bFirst=*const_cast<bool *>(static_cast<bool const *>(pbFirst));
+        if (bFirst) {
+            nRet = bOn ? TRISTATE_TRUE : TRISTATE_FALSE;
+            bFirst = false;
+        }
+        else if (nRet != (bOn ? TRISTATE_TRUE : TRISTATE_FALSE)) nRet=TRISTATE_INDET;
+    }
+}
+
+TriState SdrGlueEditView::IsMarkedGluePointsEscDir(SdrEscapeDirection nThisEsc) const
+{
+    ForceUndirtyMrkPnt();
+    bool bFirst=true;
+    TriState nRet=TRISTATE_FALSE;
+    const_cast<SdrGlueEditView*>(this)->ImpDoMarkedGluePoints(ImpGetEscDir,true,&bFirst,&nThisEsc,&nRet);
+    return nRet;
+}
+
+static void ImpSetEscDir(SdrGluePoint& rGP, const SdrObject* /*pObj*/, const void* pnThisEsc, const void* pbOn, const void*, const void*)
+{
+    SdrEscapeDirection nEsc=rGP.GetEscDir();
+    if (*static_cast<bool const *>(pbOn))
+        nEsc |= *static_cast<SdrEscapeDirection const *>(pnThisEsc);
+    else
+        nEsc &= ~*static_cast<SdrEscapeDirection const *>(pnThisEsc);
+    rGP.SetEscDir(nEsc);
+}
+
+void SdrGlueEditView::SetMarkedGluePointsEscDir(SdrEscapeDirection nThisEsc, bool bOn)
+{
+    ForceUndirtyMrkPnt();
+    BegUndo(SvxResId(STR_EditSetGlueEscDir),GetDescriptionOfMarkedGluePoints());
+    ImpDoMarkedGluePoints(ImpSetEscDir,false,&nThisEsc,&bOn);
+    EndUndo();
+}
+
+
+static void ImpGetPercent(SdrGluePoint & rGP, const SdrObject* /*pObj*/, const void* pbFirst, const void* pnRet, const void*, const void*)
+{
+    TriState& nRet=*const_cast<TriState *>(static_cast<TriState const *>(pnRet));
+    if (nRet!=TRISTATE_INDET) {
+        bool bOn=rGP.IsPercent();
+        bool& bFirst=*const_cast<bool *>(static_cast<bool const *>(pbFirst));
+        if (bFirst) {
+            nRet = bOn ? TRISTATE_TRUE : TRISTATE_FALSE;
+            bFirst = false;
+        }
+        else if ((nRet!=TRISTATE_FALSE)!=bOn)
+            nRet=TRISTATE_INDET;
+    }
+}
+
+TriState SdrGlueEditView::IsMarkedGluePointsPercent() const
+{
+    ForceUndirtyMrkPnt();
+    bool bFirst=true;
+    TriState nRet = TRISTATE_TRUE;
+    const_cast<SdrGlueEditView*>(this)->ImpDoMarkedGluePoints(ImpGetPercent,true,&bFirst,&nRet);
+    return nRet;
+}
+
+static void ImpSetPercent(SdrGluePoint& rGP, const SdrObject* pObj, const void* pbOn, const void*, const void*, const void*)
+{
+    Point aPos(rGP.GetAbsolutePos(*pObj));
+    rGP.SetPercent(*static_cast<bool const *>(pbOn));
+    rGP.SetAbsolutePos(aPos,*pObj);
+}
+
+void SdrGlueEditView::SetMarkedGluePointsPercent(bool bOn)
+{
+    ForceUndirtyMrkPnt();
+    BegUndo(SvxResId(STR_EditSetGluePercent),GetDescriptionOfMarkedGluePoints());
+    ImpDoMarkedGluePoints(ImpSetPercent,false,&bOn);
+    EndUndo();
+}
+
+
+static void ImpGetAlign(SdrGluePoint & rGP, const SdrObject* /*pObj*/, const void* pbFirst, const void* pbDontCare, const void* pbVert, const void* pnRet)
+{
+    SdrAlign& nRet=*const_cast<SdrAlign *>(static_cast<SdrAlign const *>(pnRet));
+    bool& bDontCare=*const_cast<bool *>(static_cast<bool const *>(pbDontCare));
+    bool bVert=*static_cast<bool const *>(pbVert);
+    if (!bDontCare) {
+        SdrAlign nAlg=SdrAlign::NONE;
+        if (bVert) {
+            nAlg=rGP.GetVertAlign();
+        } else {
+            nAlg=rGP.GetHorzAlign();
+        }
+        bool& bFirst=*const_cast<bool *>(static_cast<bool const *>(pbFirst));
+        if (bFirst) { nRet=nAlg; bFirst=false; }
+        else if (nRet!=nAlg) {
+            if (bVert) {
+                nRet=SdrAlign::VERT_DONTCARE;
+            } else {
+                nRet=SdrAlign::HORZ_DONTCARE;
+            }
+            bDontCare=true;
+        }
+    }
+}
+
+SdrAlign SdrGlueEditView::GetMarkedGluePointsAlign(bool bVert) const
+{
+    ForceUndirtyMrkPnt();
+    bool bFirst=true;
+    bool bDontCare=false;
+    SdrAlign nRet=SdrAlign::NONE;
+    const_cast<SdrGlueEditView*>(this)->ImpDoMarkedGluePoints(ImpGetAlign,true,&bFirst,&bDontCare,&bVert,&nRet);
+    return nRet;
+}
+
+static void ImpSetAlign(SdrGluePoint& rGP, const SdrObject* pObj, const void* pbVert, const void* pnAlign, const void*, const void*)
+{
+    Point aPos(rGP.GetAbsolutePos(*pObj));
+    if (*static_cast<bool const *>(pbVert)) { // bVert?
+        rGP.SetVertAlign(*static_cast<SdrAlign const *>(pnAlign));
+    } else {
+        rGP.SetHorzAlign(*static_cast<SdrAlign const *>(pnAlign));
+    }
+    rGP.SetAbsolutePos(aPos,*pObj);
+}
+
+void SdrGlueEditView::SetMarkedGluePointsAlign(bool bVert, SdrAlign nAlign)
+{
+    ForceUndirtyMrkPnt();
+    BegUndo(SvxResId(STR_EditSetGlueAlign),GetDescriptionOfMarkedGluePoints());
+    ImpDoMarkedGluePoints(ImpSetAlign,false,&bVert,&nAlign);
+    EndUndo();
+}
+
+void SdrGlueEditView::DeleteMarkedGluePoints()
+{
+    BrkAction();
+    ForceUndirtyMrkPnt();
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+        BegUndo(SvxResId(STR_EditDelete),GetDescriptionOfMarkedGluePoints(),SdrRepeatFunc::Delete);
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        const SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+        if (!rPts.empty())
+        {
+            SdrGluePointList* pGPL=pObj->ForceGluePointList();
+            if (pGPL!=nullptr)
+            {
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+
+                for(sal_uInt16 nPtId : rPts)
+                {
+                    sal_uInt16 nGlueIdx=pGPL->FindGluePoint(nPtId);
+                    if (nGlueIdx!=SDRGLUEPOINT_NOTFOUND)
+                    {
+                        pGPL->Delete(nGlueIdx);
+                    }
+                }
+                pObj->SetChanged();
+                pObj->BroadcastObjectChange();
+            }
+        }
+    }
+    if( bUndo )
+        EndUndo();
+    UnmarkAllGluePoints();
+    if (nMarkCount!=0)
+        mpModel->SetChanged();
+}
+
+
+void SdrGlueEditView::ImpCopyMarkedGluePoints()
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+        BegUndo();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+        SdrGluePointList* pGPL=pObj->ForceGluePointList();
+        if (!rPts.empty() && pGPL!=nullptr)
+        {
+            if( bUndo )
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+
+            SdrUShortCont aIdsToErase;
+            SdrUShortCont aIdsToInsert;
+            for(sal_uInt16 nPtId : rPts)
+            {
+                sal_uInt16 nGlueIdx=pGPL->FindGluePoint(nPtId);
+                if (nGlueIdx!=SDRGLUEPOINT_NOTFOUND)
+                {
+                    SdrGluePoint aNewGP((*pGPL)[nGlueIdx]);  // clone GluePoint
+                    sal_uInt16 nNewIdx=pGPL->Insert(aNewGP);     // and insert it
+                    sal_uInt16 nNewId=(*pGPL)[nNewIdx].GetId();  // retrieve ID of new GluePoints
+                    aIdsToErase.insert(nPtId);               // select it (instead of the old one)
+                    aIdsToInsert.insert(nNewId);
+                }
+            }
+            for(const auto& rId : aIdsToErase)
+                rPts.erase(rId);
+            rPts.insert(aIdsToInsert.begin(), aIdsToInsert.end());
+        }
+    }
+    if( bUndo )
+        EndUndo();
+
+    if (nMarkCount!=0)
+        mpModel->SetChanged();
+}
+
+
+void SdrGlueEditView::ImpTransformMarkedGluePoints(PGlueTrFunc pTrFunc, const void* p1, const void* p2, const void* p3, const void* p4)
+{
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        const SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+        if (!rPts.empty()) {
+            SdrGluePointList* pGPL=pObj->ForceGluePointList();
+            if (pGPL!=nullptr)
+            {
+                if( IsUndoEnabled() )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+
+                for(sal_uInt16 nPtId : rPts)
+                {
+                    sal_uInt16 nGlueIdx=pGPL->FindGluePoint(nPtId);
+                    if (nGlueIdx!=SDRGLUEPOINT_NOTFOUND) {
+                        SdrGluePoint& rGP=(*pGPL)[nGlueIdx];
+                        Point aPos(rGP.GetAbsolutePos(*pObj));
+                        (*pTrFunc)(aPos,p1,p2,p3,p4);
+                        rGP.SetAbsolutePos(aPos,*pObj);
+                    }
+                }
+                pObj->SetChanged();
+                pObj->BroadcastObjectChange();
+            }
+        }
+    }
+    if (nMarkCount!=0) mpModel->SetChanged();
+}
+
+
+static void ImpMove(Point& rPt, const void* p1, const void* /*p2*/, const void* /*p3*/, const void* /*p4*/)
+{
+    rPt.AdjustX(static_cast<const Size*>(p1)->Width() );
+    rPt.AdjustY(static_cast<const Size*>(p1)->Height() );
+}
+
+void SdrGlueEditView::MoveMarkedGluePoints(const Size& rSiz, bool bCopy)
+{
+    ForceUndirtyMrkPnt();
+    OUString aStr(SvxResId(STR_EditMove));
+    if (bCopy) aStr += SvxResId(STR_EditWithCopy);
+    BegUndo(aStr,GetDescriptionOfMarkedGluePoints(),SdrRepeatFunc::Move);
+    if (bCopy) ImpCopyMarkedGluePoints();
+    ImpTransformMarkedGluePoints(ImpMove,&rSiz);
+    EndUndo();
+    AdjustMarkHdl();
+}
+
+
+static void ImpResize(Point& rPt, const void* p1, const void* p2, const void* p3, const void* /*p4*/)
+{
+    ResizePoint(rPt,*static_cast<const Point*>(p1),*static_cast<const Fraction*>(p2),*static_cast<const Fraction*>(p3));
+}
+
+void SdrGlueEditView::ResizeMarkedGluePoints(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bCopy)
+{
+    ForceUndirtyMrkPnt();
+    OUString aStr(SvxResId(STR_EditResize));
+    if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
+    BegUndo(aStr,GetDescriptionOfMarkedGluePoints(),SdrRepeatFunc::Resize);
+    if (bCopy) ImpCopyMarkedGluePoints();
+    ImpTransformMarkedGluePoints(ImpResize,&rRef,&xFact,&yFact);
+    EndUndo();
+    AdjustMarkHdl();
+}
+
+
+static void ImpRotate(Point& rPt, const void* p1, const void* /*p2*/, const void* p3, const void* p4)
+{
+    RotatePoint(rPt,*static_cast<const Point*>(p1),*static_cast<const double*>(p3),*static_cast<const double*>(p4));
+}
+
+void SdrGlueEditView::RotateMarkedGluePoints(const Point& rRef, long nAngle, bool bCopy)
+{
+    ForceUndirtyMrkPnt();
+    OUString aStr(SvxResId(STR_EditRotate));
+    if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
+    BegUndo(aStr,GetDescriptionOfMarkedGluePoints(),SdrRepeatFunc::Rotate);
+    if (bCopy) ImpCopyMarkedGluePoints();
+    double nSin = sin(nAngle * F_PI18000);
+    double nCos = cos(nAngle * F_PI18000);
+    ImpTransformMarkedGluePoints(ImpRotate,&rRef,&nAngle,&nSin,&nCos);
+    EndUndo();
+    AdjustMarkHdl();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdglue.cxx b/svx/source/svdraw/svdglue.cxx
new file mode 100644
index 000000000..01235398a
--- /dev/null
+++ b/svx/source/svdraw/svdglue.cxx
@@ -0,0 +1,389 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <tools/debug.hxx>
+#include <vcl/window.hxx>
+
+#include <svx/svdglue.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdtrans.hxx>
+
+static const Size aGlueHalfSize(4,4);
+
+void SdrGluePoint::SetReallyAbsolute(bool bOn, const SdrObject& rObj)
+{
+    if ( bReallyAbsolute != bOn )
+    {
+       if ( bOn )
+       {
+           aPos=GetAbsolutePos(rObj);
+           bReallyAbsolute=bOn;
+       }
+       else
+       {
+           bReallyAbsolute=bOn;
+           Point aPt(aPos);
+           SetAbsolutePos(aPt,rObj);
+       }
+    }
+}
+
+Point SdrGluePoint::GetAbsolutePos(const SdrObject& rObj) const
+{
+    if (bReallyAbsolute) return aPos;
+    tools::Rectangle aSnap(rObj.GetSnapRect());
+    tools::Rectangle aBound(rObj.GetSnapRect());
+    Point aPt(aPos);
+
+    Point aOfs(aSnap.Center());
+    switch (GetHorzAlign()) {
+        case SdrAlign::HORZ_LEFT  : aOfs.setX(aSnap.Left() ); break;
+        case SdrAlign::HORZ_RIGHT : aOfs.setX(aSnap.Right() ); break;
+        default: break;
+    }
+    switch (GetVertAlign()) {
+        case SdrAlign::VERT_TOP   : aOfs.setY(aSnap.Top() ); break;
+        case SdrAlign::VERT_BOTTOM: aOfs.setY(aSnap.Bottom() ); break;
+        default: break;
+    }
+    if (!bNoPercent) {
+        long nXMul=aSnap.Right()-aSnap.Left();
+        long nYMul=aSnap.Bottom()-aSnap.Top();
+        long nXDiv=10000;
+        long nYDiv=10000;
+        if (nXMul!=nXDiv) {
+            aPt.setX( aPt.X() * nXMul );
+            aPt.setX( aPt.X() / nXDiv );
+        }
+        if (nYMul!=nYDiv) {
+            aPt.setY( aPt.Y() * nYMul );
+            aPt.setY( aPt.Y() / nYDiv );
+        }
+    }
+    aPt+=aOfs;
+    // Now limit to the BoundRect of the object
+    if (aPt.X()<aBound.Left  ()) aPt.setX(aBound.Left  () );
+    if (aPt.X()>aBound.Right ()) aPt.setX(aBound.Right () );
+    if (aPt.Y()<aBound.Top   ()) aPt.setY(aBound.Top   () );
+    if (aPt.Y()>aBound.Bottom()) aPt.setY(aBound.Bottom() );
+    return aPt;
+}
+
+void SdrGluePoint::SetAbsolutePos(const Point& rNewPos, const SdrObject& rObj)
+{
+    if (bReallyAbsolute) {
+        aPos=rNewPos;
+        return;
+    }
+    tools::Rectangle aSnap(rObj.GetSnapRect());
+    Point aPt(rNewPos);
+
+    Point aOfs(aSnap.Center());
+    switch (GetHorzAlign()) {
+        case SdrAlign::HORZ_LEFT  : aOfs.setX(aSnap.Left() ); break;
+        case SdrAlign::HORZ_RIGHT : aOfs.setX(aSnap.Right() ); break;
+        default: break;
+    }
+    switch (GetVertAlign()) {
+        case SdrAlign::VERT_TOP   : aOfs.setY(aSnap.Top() ); break;
+        case SdrAlign::VERT_BOTTOM: aOfs.setY(aSnap.Bottom() ); break;
+        default: break;
+    }
+    aPt-=aOfs;
+    if (!bNoPercent) {
+        long nXMul=aSnap.Right()-aSnap.Left();
+        long nYMul=aSnap.Bottom()-aSnap.Top();
+        if (nXMul==0) nXMul=1;
+        if (nYMul==0) nYMul=1;
+        long nXDiv=10000;
+        long nYDiv=10000;
+        if (nXMul!=nXDiv) {
+            aPt.setX( aPt.X() * nXDiv );
+            aPt.setX( aPt.X() / nXMul );
+        }
+        if (nYMul!=nYDiv) {
+            aPt.setY( aPt.Y() * nYDiv );
+            aPt.setY( aPt.Y() / nYMul );
+        }
+    }
+    aPos=aPt;
+}
+
+long SdrGluePoint::GetAlignAngle() const
+{
+    if (nAlign == (SdrAlign::HORZ_CENTER|SdrAlign::VERT_CENTER))
+        return 0; // Invalid!
+    else if (nAlign == (SdrAlign::HORZ_RIGHT |SdrAlign::VERT_CENTER))
+        return 0;
+    else if (nAlign == (SdrAlign::HORZ_RIGHT |SdrAlign::VERT_TOP))
+        return 4500;
+    else if (nAlign == (SdrAlign::HORZ_CENTER|SdrAlign::VERT_TOP))
+        return 9000;
+    else if (nAlign == (SdrAlign::HORZ_LEFT  |SdrAlign::VERT_TOP))
+        return 13500;
+    else if (nAlign == (SdrAlign::HORZ_LEFT  |SdrAlign::VERT_CENTER))
+        return 18000;
+    else if (nAlign == (SdrAlign::HORZ_LEFT  |SdrAlign::VERT_BOTTOM))
+        return 22500;
+    else if (nAlign == (SdrAlign::HORZ_CENTER|SdrAlign::VERT_BOTTOM))
+        return 27000;
+    else if (nAlign == (SdrAlign::HORZ_RIGHT |SdrAlign::VERT_BOTTOM))
+        return 31500;
+    return 0;
+}
+
+void SdrGluePoint::SetAlignAngle(long nAngle)
+{
+    nAngle=NormAngle36000(nAngle);
+    if (nAngle>=33750 || nAngle<2250) nAlign=SdrAlign::HORZ_RIGHT |SdrAlign::VERT_CENTER;
+    else if (nAngle< 6750) nAlign=SdrAlign::HORZ_RIGHT |SdrAlign::VERT_TOP   ;
+    else if (nAngle<11250) nAlign=SdrAlign::HORZ_CENTER|SdrAlign::VERT_TOP   ;
+    else if (nAngle<15750) nAlign=SdrAlign::HORZ_LEFT  |SdrAlign::VERT_TOP   ;
+    else if (nAngle<20250) nAlign=SdrAlign::HORZ_LEFT  |SdrAlign::VERT_CENTER;
+    else if (nAngle<24750) nAlign=SdrAlign::HORZ_LEFT  |SdrAlign::VERT_BOTTOM;
+    else if (nAngle<29250) nAlign=SdrAlign::HORZ_CENTER|SdrAlign::VERT_BOTTOM;
+    else if (nAngle<33750) nAlign=SdrAlign::HORZ_RIGHT |SdrAlign::VERT_BOTTOM;
+}
+
+long SdrGluePoint::EscDirToAngle(SdrEscapeDirection nEsc)
+{
+    switch (nEsc) {
+        case SdrEscapeDirection::RIGHT : return 0;
+        case SdrEscapeDirection::TOP   : return 9000;
+        case SdrEscapeDirection::LEFT  : return 18000;
+        case SdrEscapeDirection::BOTTOM: return 27000;
+        default: break;
+    } // switch
+    return 0;
+}
+
+SdrEscapeDirection SdrGluePoint::EscAngleToDir(long nAngle)
+{
+    nAngle=NormAngle36000(nAngle);
+    if (nAngle>=31500 || nAngle<4500)
+        return SdrEscapeDirection::RIGHT;
+    if (nAngle<13500)
+        return SdrEscapeDirection::TOP;
+    if (nAngle<22500)
+        return SdrEscapeDirection::LEFT;
+    /* (nAngle<31500)*/
+    return SdrEscapeDirection::BOTTOM;
+}
+
+void SdrGluePoint::Rotate(const Point& rRef, long nAngle, double sn, double cs, const SdrObject* pObj)
+{
+    Point aPt(pObj!=nullptr ? GetAbsolutePos(*pObj) : GetPos());
+    RotatePoint(aPt,rRef,sn,cs);
+    // rotate reference edge
+    if(nAlign != (SdrAlign::HORZ_CENTER|SdrAlign::VERT_CENTER))
+    {
+        SetAlignAngle(GetAlignAngle()+nAngle);
+    }
+    // rotate exit directions
+    SdrEscapeDirection nEscDir0=nEscDir;
+    SdrEscapeDirection nEscDir1=SdrEscapeDirection::SMART;
+    if (nEscDir0&SdrEscapeDirection::LEFT  ) nEscDir1 |= EscAngleToDir(EscDirToAngle(SdrEscapeDirection::LEFT  )+nAngle);
+    if (nEscDir0&SdrEscapeDirection::TOP   ) nEscDir1 |= EscAngleToDir(EscDirToAngle(SdrEscapeDirection::TOP   )+nAngle);
+    if (nEscDir0&SdrEscapeDirection::RIGHT ) nEscDir1 |= EscAngleToDir(EscDirToAngle(SdrEscapeDirection::RIGHT )+nAngle);
+    if (nEscDir0&SdrEscapeDirection::BOTTOM) nEscDir1 |= EscAngleToDir(EscDirToAngle(SdrEscapeDirection::BOTTOM)+nAngle);
+    nEscDir=nEscDir1;
+    if (pObj!=nullptr) SetAbsolutePos(aPt,*pObj); else SetPos(aPt);
+}
+
+void SdrGluePoint::Mirror(const Point& rRef1, const Point& rRef2, long nAngle, const SdrObject* pObj)
+{
+    Point aPt(pObj!=nullptr ? GetAbsolutePos(*pObj) : GetPos());
+    MirrorPoint(aPt,rRef1,rRef2);
+    // mirror reference edge
+    if(nAlign != (SdrAlign::HORZ_CENTER|SdrAlign::VERT_CENTER))
+    {
+        long nAW=GetAlignAngle();
+        nAW+=2*(nAngle-nAW);
+        SetAlignAngle(nAW);
+    }
+    // mirror exit directions
+    SdrEscapeDirection nEscDir0=nEscDir;
+    SdrEscapeDirection nEscDir1=SdrEscapeDirection::SMART;
+    if (nEscDir0&SdrEscapeDirection::LEFT) {
+        long nEW=EscDirToAngle(SdrEscapeDirection::LEFT);
+        nEW+=2*(nAngle-nEW);
+        nEscDir1|=EscAngleToDir(nEW);
+    }
+    if (nEscDir0&SdrEscapeDirection::TOP) {
+        long nEW=EscDirToAngle(SdrEscapeDirection::TOP);
+        nEW+=2*(nAngle-nEW);
+        nEscDir1|=EscAngleToDir(nEW);
+    }
+    if (nEscDir0&SdrEscapeDirection::RIGHT) {
+        long nEW=EscDirToAngle(SdrEscapeDirection::RIGHT);
+        nEW+=2*(nAngle-nEW);
+        nEscDir1|=EscAngleToDir(nEW);
+    }
+    if (nEscDir0&SdrEscapeDirection::BOTTOM) {
+        long nEW=EscDirToAngle(SdrEscapeDirection::BOTTOM);
+        nEW+=2*(nAngle-nEW);
+        nEscDir1|=EscAngleToDir(nEW);
+    }
+    nEscDir=nEscDir1;
+    if (pObj!=nullptr) SetAbsolutePos(aPt,*pObj); else SetPos(aPt);
+}
+
+void SdrGluePoint::Shear(const Point& rRef, double tn, bool bVShear, const SdrObject* pObj)
+{
+    Point aPt(pObj!=nullptr ? GetAbsolutePos(*pObj) : GetPos());
+    ShearPoint(aPt,rRef,tn,bVShear);
+    if (pObj!=nullptr) SetAbsolutePos(aPt,*pObj); else SetPos(aPt);
+}
+
+void SdrGluePoint::Invalidate(vcl::Window& rWin, const SdrObject* pObj) const
+{
+    bool bMapMode=rWin.IsMapModeEnabled();
+    Point aPt(pObj!=nullptr ? GetAbsolutePos(*pObj) : GetPos());
+    aPt=rWin.LogicToPixel(aPt);
+    rWin.EnableMapMode(false);
+
+    Size aSiz( aGlueHalfSize );
+    tools::Rectangle aRect(aPt.X()-aSiz.Width(),aPt.Y()-aSiz.Height(),
+                    aPt.X()+aSiz.Width(),aPt.Y()+aSiz.Height());
+
+    // do not erase background, that causes flicker (!)
+    rWin.Invalidate(aRect, InvalidateFlags::NoErase);
+
+    rWin.EnableMapMode(bMapMode);
+}
+
+bool SdrGluePoint::IsHit(const Point& rPnt, const OutputDevice& rOut, const SdrObject* pObj) const
+{
+    Point aPt(pObj!=nullptr ? GetAbsolutePos(*pObj) : GetPos());
+    Size aSiz=rOut.PixelToLogic(aGlueHalfSize);
+    tools::Rectangle aRect(aPt.X()-aSiz.Width(),aPt.Y()-aSiz.Height(),aPt.X()+aSiz.Width(),aPt.Y()+aSiz.Height());
+    return aRect.IsInside(rPnt);
+}
+
+
+SdrGluePointList& SdrGluePointList::operator=(const SdrGluePointList& rSrcList)
+{
+    if (GetCount()!=0) aList.clear();
+    sal_uInt16 nCount=rSrcList.GetCount();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        Insert(rSrcList[i]);
+    }
+    return *this;
+}
+
+// The ID's of the glue points always increase monotonously!
+// If an ID is taken already, the new glue point gets a new ID. ID 0 is reserved.
+sal_uInt16 SdrGluePointList::Insert(const SdrGluePoint& rGP)
+{
+    SdrGluePoint* pGP=new SdrGluePoint(rGP);
+    sal_uInt16 nId=pGP->GetId();
+    sal_uInt16 nCount=GetCount();
+    sal_uInt16 nInsPos=nCount;
+    sal_uInt16 nLastId=nCount!=0 ? aList[nCount-1]->GetId() : 0;
+    DBG_ASSERT(nLastId>=nCount,"SdrGluePointList::Insert(): nLastId<nCount");
+    bool bHole = nLastId>nCount;
+    if (nId<=nLastId) {
+        if (!bHole || nId==0) {
+            nId=nLastId+1;
+        } else {
+            bool bBrk = false;
+            for (sal_uInt16 nNum=0; nNum<nCount && !bBrk; nNum++) {
+                const auto& pGP2=aList[nNum];
+                sal_uInt16 nTmpId=pGP2->GetId();
+                if (nTmpId==nId) {
+                    nId=nLastId+1; // already in use
+                    bBrk = true;
+                }
+                if (nTmpId>nId) {
+                    nInsPos=nNum; // insert here (sort)
+                    bBrk = true;
+                }
+            }
+        }
+        pGP->SetId(nId);
+    }
+    aList.emplace(aList.begin()+nInsPos, pGP);
+    return nInsPos;
+}
+
+void SdrGluePointList::Invalidate(vcl::Window& rWin, const SdrObject* pObj) const
+{
+    for (auto& xGP : aList)
+        xGP->Invalidate(rWin,pObj);
+}
+
+sal_uInt16 SdrGluePointList::FindGluePoint(sal_uInt16 nId) const
+{
+    // TODO: Implement a better search algorithm
+    // List should be sorted at all times!
+    sal_uInt16 nCount=GetCount();
+    sal_uInt16 nRet=SDRGLUEPOINT_NOTFOUND;
+    for (sal_uInt16 nNum=0; nNum<nCount && nRet==SDRGLUEPOINT_NOTFOUND; nNum++) {
+        const auto& pGP=aList[nNum];
+        if (pGP->GetId()==nId) nRet=nNum;
+    }
+    return nRet;
+}
+
+sal_uInt16 SdrGluePointList::HitTest(const Point& rPnt, const OutputDevice& rOut, const SdrObject* pObj) const
+{
+    sal_uInt16 nCount = GetCount();
+    sal_uInt16 nRet = SDRGLUEPOINT_NOTFOUND;
+    sal_uInt16 nNum = nCount;
+    while ((nNum>0) && nRet==SDRGLUEPOINT_NOTFOUND) {
+        nNum--;
+        const auto& pGP = aList[nNum];
+        if (pGP->IsHit(rPnt,rOut,pObj))
+            nRet = nNum;
+    }
+    return nRet;
+}
+
+void SdrGluePointList::SetReallyAbsolute(bool bOn, const SdrObject& rObj)
+{
+    for (auto& xGP : aList)
+        xGP->SetReallyAbsolute(bOn,rObj);
+}
+
+void SdrGluePointList::Rotate(const Point& rRef, long nAngle, double sn, double cs, const SdrObject* pObj)
+{
+    for (auto& xGP : aList)
+        xGP->Rotate(rRef,nAngle,sn,cs,pObj);
+}
+
+void SdrGluePointList::Mirror(const Point& rRef1, const Point& rRef2, const SdrObject* pObj)
+{
+    Point aPt(rRef2); aPt-=rRef1;
+    long nAngle=GetAngle(aPt);
+    Mirror(rRef1,rRef2,nAngle,pObj);
+}
+
+void SdrGluePointList::Mirror(const Point& rRef1, const Point& rRef2, long nAngle, const SdrObject* pObj)
+{
+    for (auto& xGP : aList)
+        xGP->Mirror(rRef1,rRef2,nAngle,pObj);
+}
+
+void SdrGluePointList::Shear(const Point& rRef, double tn, bool bVShear, const SdrObject* pObj)
+{
+    for (auto& xGP : aList)
+        xGP->Shear(rRef,tn,bVShear,pObj);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdhdl.cxx b/svx/source/svdraw/svdhdl.cxx
new file mode 100644
index 000000000..fab9f7b03
--- /dev/null
+++ b/svx/source/svdraw/svdhdl.cxx
@@ -0,0 +1,2680 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <algorithm>
+#include <cassert>
+
+#include <svx/svdhdl.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdmrkv.hxx>
+#include <vcl/settings.hxx>
+#include <vcl/virdev.hxx>
+#include <vcl/ptrstyle.hxx>
+
+#include <svx/sxekitm.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdmodel.hxx>
+#include "gradtrns.hxx"
+#include <svx/xflgrit.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/xflftrit.hxx>
+
+#include <svx/svdopath.hxx>
+#include <basegfx/vector/b2dvector.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <svx/sdr/overlay/overlayanimatedbitmapex.hxx>
+#include <svx/sdr/overlay/overlaybitmapex.hxx>
+#include <sdr/overlay/overlayline.hxx>
+#include <sdr/overlay/overlaytriangle.hxx>
+#include <sdr/overlay/overlayhandle.hxx>
+#include <sdr/overlay/overlayrectangle.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <vcl/svapp.hxx>
+#include <svx/sdr/overlay/overlaypolypolygon.hxx>
+#include <vcl/lazydelete.hxx>
+#include <vcl/BitmapTools.hxx>
+#include <svx/sdr/contact/objectcontact.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <svx/sdr/overlay/overlayprimitive2dsequenceobject.hxx>
+#include <drawinglayer/primitive2d/graphicprimitive2d.hxx>
+#include <drawinglayer/primitive2d/maskprimitive2d.hxx>
+#include <drawinglayer/primitive2d/unifiedtransparenceprimitive2d.hxx>
+#include <drawinglayer/primitive2d/polygonprimitive2d.hxx>
+#include <memory>
+#include <bitmaps.hlst>
+
+namespace {
+
+// #i15222#
+// Due to the resource problems in Win95/98 with bitmap resources I
+// will change this handle bitmap providing class. Old version was splitting
+// and preparing all small handle bitmaps in device bitmap format, now this will
+// be done on the fly. Thus, there is only one big bitmap in memory. With
+// three source bitmaps, this will be 3 system bitmap resources instead of hundreds.
+// The price for that needs to be evaluated. Maybe we will need another change here
+// if this is too expensive.
+class SdrHdlBitmapSet
+{
+    // the bitmap holding all information
+    BitmapEx                    maMarkersBitmap;
+
+    // the cropped Bitmaps for reusage
+    ::std::vector< BitmapEx >   maRealMarkers;
+
+    // helpers
+    BitmapEx& impGetOrCreateTargetBitmap(sal_uInt16 nIndex, const tools::Rectangle& rRectangle);
+
+public:
+    explicit SdrHdlBitmapSet();
+
+    const BitmapEx& GetBitmapEx(BitmapMarkerKind eKindOfMarker, sal_uInt16 nInd);
+};
+
+}
+
+#define KIND_COUNT          (14)
+#define INDEX_COUNT         (6)
+#define INDIVIDUAL_COUNT    (5)
+
+SdrHdlBitmapSet::SdrHdlBitmapSet()
+    :   maMarkersBitmap(SIP_SA_MARKERS),
+        // 15 kinds (BitmapMarkerKind) use index [0..5] + 5 extra
+        maRealMarkers((KIND_COUNT * INDEX_COUNT) + INDIVIDUAL_COUNT)
+{
+}
+
+BitmapEx& SdrHdlBitmapSet::impGetOrCreateTargetBitmap(sal_uInt16 nIndex, const tools::Rectangle& rRectangle)
+{
+    BitmapEx& rTargetBitmap = maRealMarkers[nIndex];
+
+    if(rTargetBitmap.IsEmpty())
+    {
+        rTargetBitmap = maMarkersBitmap;
+        rTargetBitmap.Crop(rRectangle);
+    }
+
+    return rTargetBitmap;
+}
+
+// change getting of bitmap to use the big resource bitmap
+const BitmapEx& SdrHdlBitmapSet::GetBitmapEx(BitmapMarkerKind eKindOfMarker, sal_uInt16 nInd)
+{
+    // fill in size and source position in maMarkersBitmap
+    const sal_uInt16 nYPos(nInd * 11);
+
+    switch(eKindOfMarker)
+    {
+        default:
+        {
+            OSL_FAIL( "Unknown kind of marker." );
+            [[fallthrough]]; // return Rect_9x9 as default
+        }
+        case BitmapMarkerKind::Rect_9x9:
+        {
+            return impGetOrCreateTargetBitmap((1 * INDEX_COUNT) + nInd, tools::Rectangle(Point(7, nYPos), Size(9, 9)));
+        }
+
+        case BitmapMarkerKind::Rect_7x7:
+        {
+            return impGetOrCreateTargetBitmap((0 * INDEX_COUNT) + nInd, tools::Rectangle(Point(0, nYPos), Size(7, 7)));
+        }
+
+        case BitmapMarkerKind::Rect_11x11:
+        {
+            return impGetOrCreateTargetBitmap((2 * INDEX_COUNT) + nInd, tools::Rectangle(Point(16, nYPos), Size(11, 11)));
+        }
+
+        case BitmapMarkerKind::Rect_13x13:
+        {
+            const sal_uInt16 nIndex((3 * INDEX_COUNT) + nInd);
+
+            switch(nInd)
+            {
+                case 0:
+                {
+                    return impGetOrCreateTargetBitmap(nIndex, tools::Rectangle(Point(72, 66), Size(13, 13)));
+                }
+                case 1:
+                {
+                    return impGetOrCreateTargetBitmap(nIndex, tools::Rectangle(Point(85, 66), Size(13, 13)));
+                }
+                case 2:
+                {
+                    return impGetOrCreateTargetBitmap(nIndex, tools::Rectangle(Point(72, 79), Size(13, 13)));
+                }
+                case 3:
+                {
+                    return impGetOrCreateTargetBitmap(nIndex, tools::Rectangle(Point(85, 79), Size(13, 13)));
+                }
+                case 4:
+                {
+                    return impGetOrCreateTargetBitmap(nIndex, tools::Rectangle(Point(98, 79), Size(13, 13)));
+                }
+                default: // case 5:
+                {
+                    return impGetOrCreateTargetBitmap(nIndex, tools::Rectangle(Point(98, 66), Size(13, 13)));
+                }
+            }
+        }
+
+        case BitmapMarkerKind::Circ_7x7:
+        case BitmapMarkerKind::Customshape_7x7:
+        {
+            return impGetOrCreateTargetBitmap((4 * INDEX_COUNT) + nInd, tools::Rectangle(Point(27, nYPos), Size(7, 7)));
+        }
+
+        case BitmapMarkerKind::Circ_9x9:
+        case BitmapMarkerKind::Customshape_9x9:
+        {
+            return impGetOrCreateTargetBitmap((5 * INDEX_COUNT) + nInd, tools::Rectangle(Point(34, nYPos), Size(9, 9)));
+        }
+
+        case BitmapMarkerKind::Circ_11x11:
+        case BitmapMarkerKind::Customshape_11x11:
+        {
+            return impGetOrCreateTargetBitmap((6 * INDEX_COUNT) + nInd, tools::Rectangle(Point(43, nYPos), Size(11, 11)));
+        }
+
+        case BitmapMarkerKind::Elli_7x9:
+        {
+            return impGetOrCreateTargetBitmap((7 * INDEX_COUNT) + nInd, tools::Rectangle(Point(54, nYPos), Size(7, 9)));
+        }
+
+        case BitmapMarkerKind::Elli_9x11:
+        {
+            return impGetOrCreateTargetBitmap((8 * INDEX_COUNT) + nInd, tools::Rectangle(Point(61, nYPos), Size(9, 11)));
+        }
+
+        case BitmapMarkerKind::Elli_9x7:
+        {
+            return impGetOrCreateTargetBitmap((9 * INDEX_COUNT) + nInd, tools::Rectangle(Point(70, nYPos), Size(9, 7)));
+        }
+
+        case BitmapMarkerKind::Elli_11x9:
+        {
+            return impGetOrCreateTargetBitmap((10 * INDEX_COUNT) + nInd, tools::Rectangle(Point(79, nYPos), Size(11, 9)));
+        }
+
+        case BitmapMarkerKind::RectPlus_7x7:
+        {
+            return impGetOrCreateTargetBitmap((11 * INDEX_COUNT) + nInd, tools::Rectangle(Point(90, nYPos), Size(7, 7)));
+        }
+
+        case BitmapMarkerKind::RectPlus_9x9:
+        {
+            return impGetOrCreateTargetBitmap((12 * INDEX_COUNT) + nInd, tools::Rectangle(Point(97, nYPos), Size(9, 9)));
+        }
+
+        case BitmapMarkerKind::RectPlus_11x11:
+        {
+            return impGetOrCreateTargetBitmap((13 * INDEX_COUNT) + nInd, tools::Rectangle(Point(106, nYPos), Size(11, 11)));
+        }
+
+        case BitmapMarkerKind::Crosshair:
+        {
+            return impGetOrCreateTargetBitmap((KIND_COUNT * INDEX_COUNT) + 0, tools::Rectangle(Point(0, 68), Size(15, 15)));
+        }
+
+        case BitmapMarkerKind::Glue:
+        {
+            return impGetOrCreateTargetBitmap((KIND_COUNT * INDEX_COUNT) + 1, tools::Rectangle(Point(15, 76), Size(9, 9)));
+        }
+
+        case BitmapMarkerKind::Glue_Deselected:
+        {
+            return impGetOrCreateTargetBitmap((KIND_COUNT * INDEX_COUNT) + 2, tools::Rectangle(Point(15, 67), Size(9, 9)));
+        }
+
+        case BitmapMarkerKind::Anchor: // AnchorTR for SW
+        case BitmapMarkerKind::AnchorTR:
+        {
+            return impGetOrCreateTargetBitmap((KIND_COUNT * INDEX_COUNT) + 3, tools::Rectangle(Point(24, 67), Size(24, 24)));
+        }
+
+        // add AnchorPressed to be able to animate anchor control
+        case BitmapMarkerKind::AnchorPressed:
+        case BitmapMarkerKind::AnchorPressedTR:
+        {
+            return impGetOrCreateTargetBitmap((KIND_COUNT * INDEX_COUNT) + 4, tools::Rectangle(Point(48, 67), Size(24, 24)));
+        }
+    }
+}
+
+
+SdrHdl::SdrHdl():
+    pObj(nullptr),
+    pPV(nullptr),
+    pHdlList(nullptr),
+    eKind(SdrHdlKind::Move),
+    nRotationAngle(0),
+    nObjHdlNum(0),
+    nPolyNum(0),
+    nPPntNum(0),
+    nSourceHdlNum(0),
+    bSelect(false),
+    b1PixMore(false),
+    bPlusHdl(false),
+    mbMoveOutside(false),
+    mbMouseOver(false)
+{
+}
+
+SdrHdl::SdrHdl(const Point& rPnt, SdrHdlKind eNewKind):
+    pObj(nullptr),
+    pPV(nullptr),
+    pHdlList(nullptr),
+    aPos(rPnt),
+    eKind(eNewKind),
+    nRotationAngle(0),
+    nObjHdlNum(0),
+    nPolyNum(0),
+    nPPntNum(0),
+    nSourceHdlNum(0),
+    bSelect(false),
+    b1PixMore(false),
+    bPlusHdl(false),
+    mbMoveOutside(false),
+    mbMouseOver(false)
+{
+}
+
+SdrHdl::~SdrHdl()
+{
+    GetRidOfIAObject();
+}
+
+void SdrHdl::Set1PixMore(bool bJa)
+{
+    if(b1PixMore != bJa)
+    {
+        b1PixMore = bJa;
+
+        // create new display
+        Touch();
+    }
+}
+
+void SdrHdl::SetMoveOutside( bool bMoveOutside )
+{
+    if(mbMoveOutside != bMoveOutside)
+    {
+        mbMoveOutside = bMoveOutside;
+
+        // create new display
+        Touch();
+    }
+}
+
+void SdrHdl::SetRotationAngle(long n)
+{
+    if(nRotationAngle != n)
+    {
+        nRotationAngle = n;
+
+        // create new display
+        Touch();
+    }
+}
+
+void SdrHdl::SetPos(const Point& rPnt)
+{
+    if(aPos != rPnt)
+    {
+        // remember new position
+        aPos = rPnt;
+
+        // create new display
+        Touch();
+    }
+}
+
+void SdrHdl::SetSelected(bool bJa)
+{
+    if(bSelect != bJa)
+    {
+        // remember new value
+        bSelect = bJa;
+
+        // create new display
+        Touch();
+    }
+}
+
+void SdrHdl::SetHdlList(SdrHdlList* pList)
+{
+    if(pHdlList != pList)
+    {
+        // remember list
+        pHdlList = pList;
+
+        // now its possible to create graphic representation
+        Touch();
+    }
+}
+
+void SdrHdl::SetObj(SdrObject* pNewObj)
+{
+    if(pObj != pNewObj)
+    {
+        // remember new object
+        pObj = pNewObj;
+
+        // graphic representation may have changed
+        Touch();
+    }
+}
+
+void SdrHdl::Touch()
+{
+    // force update of graphic representation
+    CreateB2dIAObject();
+}
+
+void SdrHdl::GetRidOfIAObject()
+{
+
+    // OVERLAYMANAGER
+    maOverlayGroup.clear();
+}
+
+void SdrHdl::CreateB2dIAObject()
+{
+    // first throw away old one
+    GetRidOfIAObject();
+
+    if(pHdlList && pHdlList->GetView() && !pHdlList->GetView()->areMarkHandlesHidden())
+    {
+        BitmapColorIndex eColIndex = BitmapColorIndex::LightGreen;
+        BitmapMarkerKind eKindOfMarker = BitmapMarkerKind::Rect_7x7;
+
+        bool bRot = pHdlList->IsRotateShear();
+        if(pObj)
+            eColIndex = bSelect ? BitmapColorIndex::Cyan : BitmapColorIndex::LightCyan;
+        if(bRot)
+        {
+            // red rotation handles
+            if(pObj && bSelect)
+                eColIndex = BitmapColorIndex::Red;
+            else
+                eColIndex = BitmapColorIndex::LightRed;
+        }
+
+        switch(eKind)
+        {
+            case SdrHdlKind::Move:
+            {
+                eKindOfMarker = b1PixMore ? BitmapMarkerKind::Rect_9x9 : BitmapMarkerKind::Rect_7x7;
+                break;
+            }
+            case SdrHdlKind::UpperLeft:
+            case SdrHdlKind::UpperRight:
+            case SdrHdlKind::LowerLeft:
+            case SdrHdlKind::LowerRight:
+            {
+                // corner handles
+                if(bRot)
+                {
+                    eKindOfMarker = BitmapMarkerKind::Circ_7x7;
+                }
+                else
+                {
+                    eKindOfMarker = BitmapMarkerKind::Rect_7x7;
+                }
+                break;
+            }
+            case SdrHdlKind::Upper:
+            case SdrHdlKind::Lower:
+            {
+                // Upper/Lower handles
+                if(bRot)
+                {
+                    eKindOfMarker = BitmapMarkerKind::Elli_9x7;
+                }
+                else
+                {
+                    eKindOfMarker = BitmapMarkerKind::Rect_7x7;
+                }
+                break;
+            }
+            case SdrHdlKind::Left:
+            case SdrHdlKind::Right:
+            {
+                // Left/Right handles
+                if(bRot)
+                {
+                    eKindOfMarker = BitmapMarkerKind::Elli_7x9;
+                }
+                else
+                {
+                    eKindOfMarker = BitmapMarkerKind::Rect_7x7;
+                }
+                break;
+            }
+            case SdrHdlKind::Poly:
+            {
+                if(bRot)
+                {
+                    eKindOfMarker = b1PixMore ? BitmapMarkerKind::Circ_9x9 : BitmapMarkerKind::Circ_7x7;
+                }
+                else
+                {
+                    eKindOfMarker = b1PixMore ? BitmapMarkerKind::Rect_9x9 : BitmapMarkerKind::Rect_7x7;
+                }
+                break;
+            }
+            case SdrHdlKind::BezierWeight: // weight at poly
+            {
+                eKindOfMarker = BitmapMarkerKind::Circ_7x7;
+                break;
+            }
+            case SdrHdlKind::Circle:
+            {
+                eKindOfMarker = BitmapMarkerKind::Rect_11x11;
+                break;
+            }
+            case SdrHdlKind::Ref1:
+            case SdrHdlKind::Ref2:
+            {
+                eKindOfMarker = BitmapMarkerKind::Crosshair;
+                break;
+            }
+            case SdrHdlKind::Glue:
+            {
+                eKindOfMarker = BitmapMarkerKind::Glue;
+                break;
+            }
+            case SdrHdlKind::Anchor:
+            {
+                eKindOfMarker = BitmapMarkerKind::Anchor;
+                break;
+            }
+            case SdrHdlKind::User:
+            {
+                break;
+            }
+            // top right anchor for SW
+            case SdrHdlKind::Anchor_TR:
+            {
+                eKindOfMarker = BitmapMarkerKind::AnchorTR;
+                break;
+            }
+
+            // for SJ and the CustomShapeHandles:
+            case SdrHdlKind::CustomShape1:
+            {
+                eKindOfMarker = b1PixMore ? BitmapMarkerKind::Customshape_9x9 : BitmapMarkerKind::Customshape_7x7;
+                eColIndex = BitmapColorIndex::Yellow;
+                break;
+            }
+            default:
+                break;
+        }
+
+        SdrMarkView* pView = pHdlList->GetView();
+        SdrPageView* pPageView = pView->GetSdrPageView();
+
+        if(pPageView)
+        {
+            for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+            {
+                // const SdrPageViewWinRec& rPageViewWinRec = rPageViewWinList[b];
+                const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                if(rPageWindow.GetPaintWindow().OutputToWindow())
+                {
+                    Point aMoveOutsideOffset(0, 0);
+                    OutputDevice& rOutDev = rPageWindow.GetPaintWindow().GetOutputDevice();
+
+                    // add offset if necessary
+                    if(pHdlList->IsMoveOutside() || mbMoveOutside)
+                    {
+                        Size aOffset = rOutDev.PixelToLogic(Size(4, 4));
+
+                        if(eKind == SdrHdlKind::UpperLeft || eKind == SdrHdlKind::Upper || eKind == SdrHdlKind::UpperRight)
+                            aMoveOutsideOffset.AdjustY( -(aOffset.Width()) );
+                        if(eKind == SdrHdlKind::LowerLeft || eKind == SdrHdlKind::Lower || eKind == SdrHdlKind::LowerRight)
+                            aMoveOutsideOffset.AdjustY(aOffset.Height() );
+                        if(eKind == SdrHdlKind::UpperLeft || eKind == SdrHdlKind::Left  || eKind == SdrHdlKind::LowerLeft)
+                            aMoveOutsideOffset.AdjustX( -(aOffset.Width()) );
+                        if(eKind == SdrHdlKind::UpperRight || eKind == SdrHdlKind::Right || eKind == SdrHdlKind::LowerRight)
+                            aMoveOutsideOffset.AdjustX(aOffset.Height() );
+                    }
+
+                    const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                    if (xManager.is())
+                    {
+                        basegfx::B2DPoint aPosition(aPos.X(), aPos.Y());
+                        std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject;
+                        if (getenv ("SVX_DRAW_HANDLES") && (eKindOfMarker == BitmapMarkerKind::Rect_7x7 || eKindOfMarker == BitmapMarkerKind::Rect_9x9 || eKindOfMarker == BitmapMarkerKind::Rect_11x11))
+                        {
+                            double fSize = 7.0;
+                            switch (eKindOfMarker)
+                            {
+                                case BitmapMarkerKind::Rect_9x9:
+                                    fSize = 9.0;
+                                    break;
+                                case BitmapMarkerKind::Rect_11x11:
+                                    fSize = 11.0;
+                                    break;
+                                default:
+                                    break;
+                            }
+                            float fScalingFactor = rOutDev.GetDPIScaleFactor();
+                            basegfx::B2DSize aB2DSize(fSize * fScalingFactor, fSize * fScalingFactor);
+
+                            Color aHandleFillColor(COL_LIGHTGREEN);
+                            switch (eColIndex)
+                            {
+                                case BitmapColorIndex::Cyan:
+                                    aHandleFillColor = COL_CYAN;
+                                    break;
+                                case BitmapColorIndex::LightCyan:
+                                    aHandleFillColor = COL_LIGHTCYAN;
+                                    break;
+                                case BitmapColorIndex::Red:
+                                    aHandleFillColor = COL_RED;
+                                    break;
+                                case BitmapColorIndex::LightRed:
+                                    aHandleFillColor = COL_LIGHTRED;
+                                    break;
+                                case BitmapColorIndex::Yellow:
+                                    aHandleFillColor = COL_YELLOW;
+                                    break;
+                                default:
+                                    break;
+                            }
+                            pNewOverlayObject.reset(new sdr::overlay::OverlayHandle(aPosition, aB2DSize, /*HandleStrokeColor*/COL_BLACK, aHandleFillColor));
+                        }
+                        else
+                        {
+                            pNewOverlayObject = CreateOverlayObject(
+                                                    aPosition, eColIndex, eKindOfMarker,
+                                                    aMoveOutsideOffset);
+                        }
+
+                        // OVERLAYMANAGER
+                        insertNewlyCreatedOverlayObjectForSdrHdl(
+                            std::move(pNewOverlayObject),
+                            rPageWindow.GetObjectContact(),
+                            *xManager);
+                    }
+                }
+            }
+        }
+    }
+}
+
+BitmapMarkerKind SdrHdl::GetNextBigger(BitmapMarkerKind eKnd)
+{
+    BitmapMarkerKind eRetval(eKnd);
+
+    switch(eKnd)
+    {
+        case BitmapMarkerKind::Rect_7x7:          eRetval = BitmapMarkerKind::Rect_9x9;         break;
+        case BitmapMarkerKind::Rect_9x9:          eRetval = BitmapMarkerKind::Rect_11x11;       break;
+        case BitmapMarkerKind::Rect_11x11:        eRetval = BitmapMarkerKind::Rect_13x13;       break;
+
+        case BitmapMarkerKind::Circ_7x7:          eRetval = BitmapMarkerKind::Circ_9x9;         break;
+        case BitmapMarkerKind::Circ_9x9:          eRetval = BitmapMarkerKind::Circ_11x11;       break;
+
+        case BitmapMarkerKind::Customshape_7x7:       eRetval = BitmapMarkerKind::Customshape_9x9;      break;
+        case BitmapMarkerKind::Customshape_9x9:       eRetval = BitmapMarkerKind::Customshape_11x11;    break;
+        //case BitmapMarkerKind::Customshape_11x11:   eRetval = ; break;
+
+        case BitmapMarkerKind::Elli_7x9:          eRetval = BitmapMarkerKind::Elli_9x11;        break;
+
+        case BitmapMarkerKind::Elli_9x7:          eRetval = BitmapMarkerKind::Elli_11x9;        break;
+
+        case BitmapMarkerKind::RectPlus_7x7:      eRetval = BitmapMarkerKind::RectPlus_9x9;     break;
+        case BitmapMarkerKind::RectPlus_9x9:      eRetval = BitmapMarkerKind::RectPlus_11x11;   break;
+
+        // let anchor blink with its pressed state
+        case BitmapMarkerKind::Anchor:            eRetval = BitmapMarkerKind::AnchorPressed;    break;
+
+        // same for AnchorTR
+        case BitmapMarkerKind::AnchorTR:          eRetval = BitmapMarkerKind::AnchorPressedTR;  break;
+        default:
+            break;
+    }
+
+    return eRetval;
+}
+
+namespace
+{
+
+OUString appendMarkerName(BitmapMarkerKind eKindOfMarker)
+{
+    switch(eKindOfMarker)
+    {
+        case BitmapMarkerKind::Rect_7x7:
+            return "rect7";
+        case BitmapMarkerKind::Rect_9x9:
+            return "rect9";
+        case BitmapMarkerKind::Rect_11x11:
+            return "rect11";
+        case BitmapMarkerKind::Rect_13x13:
+            return "rect13";
+        case BitmapMarkerKind::Circ_7x7:
+        case BitmapMarkerKind::Customshape_7x7:
+            return "circ7";
+        case BitmapMarkerKind::Circ_9x9:
+        case BitmapMarkerKind::Customshape_9x9:
+            return "circ9";
+        case BitmapMarkerKind::Circ_11x11:
+        case BitmapMarkerKind::Customshape_11x11:
+            return "circ11";
+        case BitmapMarkerKind::Elli_7x9:
+            return "elli7x9";
+        case BitmapMarkerKind::Elli_9x11:
+            return "elli9x11";
+        case BitmapMarkerKind::Elli_9x7:
+            return "elli9x7";
+        case BitmapMarkerKind::Elli_11x9:
+            return "elli11x9";
+        case BitmapMarkerKind::RectPlus_7x7:
+            return "rectplus7";
+        case BitmapMarkerKind::RectPlus_9x9:
+            return "rectplus9";
+        case BitmapMarkerKind::RectPlus_11x11:
+            return "rectplus11";
+        case BitmapMarkerKind::Crosshair:
+            return "cross";
+        case BitmapMarkerKind::Anchor:
+        case BitmapMarkerKind::AnchorTR:
+            return "anchor";
+        case BitmapMarkerKind::AnchorPressed:
+        case BitmapMarkerKind::AnchorPressedTR:
+            return "anchor-pressed";
+        case BitmapMarkerKind::Glue:
+            return "glue-selected";
+        case BitmapMarkerKind::Glue_Deselected:
+            return "glue-unselected";
+        default:
+            break;
+    }
+    return OUString();
+}
+
+OUString appendMarkerColor(BitmapColorIndex eIndex)
+{
+    switch(eIndex)
+    {
+        case BitmapColorIndex::LightGreen:
+            return "1";
+        case BitmapColorIndex::Cyan:
+            return "2";
+        case BitmapColorIndex::LightCyan:
+            return "3";
+        case BitmapColorIndex::Red:
+            return "4";
+        case BitmapColorIndex::LightRed:
+            return "5";
+        case BitmapColorIndex::Yellow:
+            return "6";
+        default:
+            break;
+    }
+    return OUString();
+}
+
+BitmapEx ImpGetBitmapEx(BitmapMarkerKind eKindOfMarker, BitmapColorIndex eIndex)
+{
+    // use this code path only when we use HiDPI (for now)
+    if (Application::GetDefaultDevice()->GetDPIScalePercentage() > 100)
+    {
+        OUString sMarkerPrefix("svx/res/marker-");
+
+        OUString sMarkerName = appendMarkerName(eKindOfMarker);
+        if (!sMarkerName.isEmpty())
+        {
+            BitmapEx aBitmapEx;
+
+            if (eKindOfMarker == BitmapMarkerKind::Crosshair
+             || eKindOfMarker == BitmapMarkerKind::Anchor
+             || eKindOfMarker == BitmapMarkerKind::AnchorTR
+             || eKindOfMarker == BitmapMarkerKind::AnchorPressed
+             || eKindOfMarker == BitmapMarkerKind::AnchorPressedTR
+             || eKindOfMarker == BitmapMarkerKind::Glue
+             || eKindOfMarker == BitmapMarkerKind::Glue_Deselected)
+            {
+                aBitmapEx = vcl::bitmap::loadFromName(sMarkerPrefix + sMarkerName + ".png");
+            }
+            else
+            {
+                aBitmapEx = vcl::bitmap::loadFromName(sMarkerPrefix + sMarkerName + "-" + appendMarkerColor(eIndex) + ".png");
+            }
+
+            if (!aBitmapEx.IsEmpty())
+                return aBitmapEx;
+        }
+    }
+
+    // if we can't load the marker...
+
+    static vcl::DeleteOnDeinit< SdrHdlBitmapSet > aModernSet(new SdrHdlBitmapSet);
+    return aModernSet.get()->GetBitmapEx(eKindOfMarker, sal_uInt16(eIndex));
+}
+
+} // end anonymous namespace
+
+std::unique_ptr<sdr::overlay::OverlayObject> SdrHdl::CreateOverlayObject(
+    const basegfx::B2DPoint& rPos,
+    BitmapColorIndex eColIndex, BitmapMarkerKind eKindOfMarker, Point aMoveOutsideOffset)
+{
+    std::unique_ptr<sdr::overlay::OverlayObject> pRetval;
+
+    // support bigger sizes
+    bool bForceBiggerSize(false);
+
+    if(pHdlList->GetHdlSize() > 3)
+    {
+        switch(eKindOfMarker)
+        {
+            case BitmapMarkerKind::Anchor:
+            case BitmapMarkerKind::AnchorPressed:
+            case BitmapMarkerKind::AnchorTR:
+            case BitmapMarkerKind::AnchorPressedTR:
+            {
+                // #i121463# For anchor, do not simply make bigger because of HdlSize,
+                // do it dependent of IsSelected() which Writer can set in drag mode
+                if(IsSelected())
+                {
+                    bForceBiggerSize = true;
+                }
+                break;
+            }
+            default:
+            {
+                bForceBiggerSize = true;
+                break;
+            }
+        }
+    }
+
+    if(bForceBiggerSize)
+    {
+        eKindOfMarker = GetNextBigger(eKindOfMarker);
+    }
+
+    // This handle has the focus, visualize it
+    if(IsFocusHdl() && pHdlList && pHdlList->GetFocusHdl() == this)
+    {
+        // create animated handle
+        BitmapMarkerKind eNextBigger = GetNextBigger(eKindOfMarker);
+
+        if(eNextBigger == eKindOfMarker)
+        {
+            // this may happen for the not supported getting-bigger types.
+            // Choose an alternative here
+            switch(eKindOfMarker)
+            {
+                case BitmapMarkerKind::Rect_13x13:        eNextBigger = BitmapMarkerKind::Rect_11x11;   break;
+                case BitmapMarkerKind::Circ_11x11:        eNextBigger = BitmapMarkerKind::Elli_11x9;    break;
+                case BitmapMarkerKind::Elli_9x11:         eNextBigger = BitmapMarkerKind::Elli_11x9;    break;
+                case BitmapMarkerKind::Elli_11x9:         eNextBigger = BitmapMarkerKind::Elli_9x11;    break;
+                case BitmapMarkerKind::RectPlus_11x11:    eNextBigger = BitmapMarkerKind::Rect_13x13;   break;
+
+                case BitmapMarkerKind::Crosshair:
+                    eNextBigger = BitmapMarkerKind::Glue;
+                    break;
+
+                case BitmapMarkerKind::Glue:
+                    eNextBigger = BitmapMarkerKind::Crosshair;
+                    break;
+                case BitmapMarkerKind::Glue_Deselected:
+                    eNextBigger = BitmapMarkerKind::Glue;
+                    break;
+                default:
+                    break;
+            }
+        }
+
+        // create animated handle
+        BitmapEx aBmpEx1 = ImpGetBitmapEx(eKindOfMarker, eColIndex);
+        BitmapEx aBmpEx2 = ImpGetBitmapEx(eNextBigger,   eColIndex);
+
+        // #i53216# Use system cursor blink time. Use the unsigned value.
+        const StyleSettings& rStyleSettings = Application::GetSettings().GetStyleSettings();
+        const sal_uInt64 nBlinkTime(rStyleSettings.GetCursorBlinkTime());
+
+        if(eKindOfMarker == BitmapMarkerKind::Anchor || eKindOfMarker == BitmapMarkerKind::AnchorPressed)
+        {
+            // when anchor is used take upper left as reference point inside the handle
+            pRetval.reset(new sdr::overlay::OverlayAnimatedBitmapEx(rPos, aBmpEx1, aBmpEx2, nBlinkTime));
+        }
+        else if(eKindOfMarker == BitmapMarkerKind::AnchorTR || eKindOfMarker == BitmapMarkerKind::AnchorPressedTR)
+        {
+            // AnchorTR for SW, take top right as (0,0)
+            pRetval.reset(new sdr::overlay::OverlayAnimatedBitmapEx(rPos, aBmpEx1, aBmpEx2, nBlinkTime,
+                static_cast<sal_uInt16>(aBmpEx1.GetSizePixel().Width() - 1), 0,
+                static_cast<sal_uInt16>(aBmpEx2.GetSizePixel().Width() - 1), 0));
+        }
+        else
+        {
+            // create centered handle as default
+            pRetval.reset(new sdr::overlay::OverlayAnimatedBitmapEx(rPos, aBmpEx1, aBmpEx2, nBlinkTime,
+                static_cast<sal_uInt16>(aBmpEx1.GetSizePixel().Width() - 1) >> 1,
+                static_cast<sal_uInt16>(aBmpEx1.GetSizePixel().Height() - 1) >> 1,
+                static_cast<sal_uInt16>(aBmpEx2.GetSizePixel().Width() - 1) >> 1,
+                static_cast<sal_uInt16>(aBmpEx2.GetSizePixel().Height() - 1) >> 1));
+        }
+    }
+    else
+    {
+        // create normal handle: use ImpGetBitmapEx(...) now
+        BitmapEx aBmpEx = ImpGetBitmapEx(eKindOfMarker, eColIndex);
+
+        // When the image with handles is not found, the bitmap returned is
+        // empty. This is a problem when we use LibreOffice as a library
+        // (through LOKit - for example on Android) even when we don't show
+        // the handles, because the hit test would always return false.
+        //
+        // This HACK replaces the empty bitmap with a black 13x13 bitmap handle
+        // so that the hit test works for this case.
+        if (aBmpEx.IsEmpty())
+        {
+            aBmpEx = BitmapEx(Size(13, 13), 24);
+            aBmpEx.Erase(COL_BLACK);
+        }
+
+        if(eKindOfMarker == BitmapMarkerKind::Anchor || eKindOfMarker == BitmapMarkerKind::AnchorPressed)
+        {
+            // upper left as reference point inside the handle for AnchorPressed, too
+            pRetval.reset(new sdr::overlay::OverlayBitmapEx(rPos, aBmpEx));
+        }
+        else if(eKindOfMarker == BitmapMarkerKind::AnchorTR || eKindOfMarker == BitmapMarkerKind::AnchorPressedTR)
+        {
+            // AnchorTR for SW, take top right as (0,0)
+            pRetval.reset(new sdr::overlay::OverlayBitmapEx(rPos, aBmpEx,
+                static_cast<sal_uInt16>(aBmpEx.GetSizePixel().Width() - 1), 0));
+        }
+        else
+        {
+            sal_uInt16 nCenX(static_cast<sal_uInt16>(aBmpEx.GetSizePixel().Width() - 1) >> 1);
+            sal_uInt16 nCenY(static_cast<sal_uInt16>(aBmpEx.GetSizePixel().Height() - 1) >> 1);
+
+            if(aMoveOutsideOffset.X() > 0)
+            {
+                nCenX = 0;
+            }
+            else if(aMoveOutsideOffset.X() < 0)
+            {
+                nCenX = static_cast<sal_uInt16>(aBmpEx.GetSizePixel().Width() - 1);
+            }
+
+            if(aMoveOutsideOffset.Y() > 0)
+            {
+                nCenY = 0;
+            }
+            else if(aMoveOutsideOffset.Y() < 0)
+            {
+                nCenY = static_cast<sal_uInt16>(aBmpEx.GetSizePixel().Height() - 1);
+            }
+
+            // create centered handle as default
+            pRetval.reset(new sdr::overlay::OverlayBitmapEx(rPos, aBmpEx, nCenX, nCenY));
+        }
+    }
+
+    return pRetval;
+}
+
+bool SdrHdl::IsHdlHit(const Point& rPnt) const
+{
+    // OVERLAYMANAGER
+    basegfx::B2DPoint aPosition(rPnt.X(), rPnt.Y());
+    return maOverlayGroup.isHitLogic(aPosition);
+}
+
+PointerStyle SdrHdl::GetPointer() const
+{
+    PointerStyle ePtr=PointerStyle::Move;
+    const bool bSize=eKind>=SdrHdlKind::UpperLeft && eKind<=SdrHdlKind::LowerRight;
+    const bool bRot=pHdlList!=nullptr && pHdlList->IsRotateShear();
+    const bool bDis=pHdlList!=nullptr && pHdlList->IsDistortShear();
+    if (bSize && pHdlList!=nullptr && (bRot || bDis)) {
+        switch (eKind) {
+            case SdrHdlKind::UpperLeft: case SdrHdlKind::UpperRight:
+            case SdrHdlKind::LowerLeft: case SdrHdlKind::LowerRight: ePtr=bRot ? PointerStyle::Rotate : PointerStyle::RefHand; break;
+            case SdrHdlKind::Left : case SdrHdlKind::Right: ePtr=PointerStyle::VShear; break;
+            case SdrHdlKind::Upper: case SdrHdlKind::Lower: ePtr=PointerStyle::HShear; break;
+            default:
+                break;
+        }
+    } else {
+        // When resizing rotated rectangles, rotate the mouse cursor slightly, too
+        if (bSize && nRotationAngle!=0) {
+            long nHdlAngle=0;
+            switch (eKind) {
+                case SdrHdlKind::LowerRight: nHdlAngle=31500; break;
+                case SdrHdlKind::Lower: nHdlAngle=27000; break;
+                case SdrHdlKind::LowerLeft: nHdlAngle=22500; break;
+                case SdrHdlKind::Left : nHdlAngle=18000; break;
+                case SdrHdlKind::UpperLeft: nHdlAngle=13500; break;
+                case SdrHdlKind::Upper: nHdlAngle=9000;  break;
+                case SdrHdlKind::UpperRight: nHdlAngle=4500;  break;
+                case SdrHdlKind::Right: nHdlAngle=0;     break;
+                default:
+                    break;
+            }
+            // a little bit more (for rounding)
+            nHdlAngle = NormAngle36000(nHdlAngle + nRotationAngle + 2249);
+            nHdlAngle/=4500;
+            switch (static_cast<sal_uInt8>(nHdlAngle)) {
+                case 0: ePtr=PointerStyle::ESize;  break;
+                case 1: ePtr=PointerStyle::NESize; break;
+                case 2: ePtr=PointerStyle::NSize;  break;
+                case 3: ePtr=PointerStyle::NWSize; break;
+                case 4: ePtr=PointerStyle::WSize;  break;
+                case 5: ePtr=PointerStyle::SWSize; break;
+                case 6: ePtr=PointerStyle::SSize;  break;
+                case 7: ePtr=PointerStyle::SESize; break;
+            } // switch
+        } else {
+            switch (eKind) {
+                case SdrHdlKind::UpperLeft: ePtr=PointerStyle::NWSize;  break;
+                case SdrHdlKind::Upper: ePtr=PointerStyle::NSize;     break;
+                case SdrHdlKind::UpperRight: ePtr=PointerStyle::NESize;  break;
+                case SdrHdlKind::Left : ePtr=PointerStyle::WSize;     break;
+                case SdrHdlKind::Right: ePtr=PointerStyle::ESize;     break;
+                case SdrHdlKind::LowerLeft: ePtr=PointerStyle::SWSize;  break;
+                case SdrHdlKind::Lower: ePtr=PointerStyle::SSize;     break;
+                case SdrHdlKind::LowerRight: ePtr=PointerStyle::SESize;  break;
+                case SdrHdlKind::Poly : ePtr=PointerStyle::MovePoint; break;
+                case SdrHdlKind::Circle : ePtr=PointerStyle::Hand;      break;
+                case SdrHdlKind::Ref1 : ePtr=PointerStyle::RefHand;   break;
+                case SdrHdlKind::Ref2 : ePtr=PointerStyle::RefHand;   break;
+                case SdrHdlKind::BezierWeight : ePtr=PointerStyle::MoveBezierWeight; break;
+                case SdrHdlKind::Glue : ePtr=PointerStyle::MovePoint; break;
+                case SdrHdlKind::CustomShape1 : ePtr=PointerStyle::Hand; break;
+                default:
+                    break;
+            }
+        }
+    }
+    return ePtr;
+}
+
+bool SdrHdl::IsFocusHdl() const
+{
+    switch(eKind)
+    {
+        case SdrHdlKind::UpperLeft:
+        case SdrHdlKind::Upper:
+        case SdrHdlKind::UpperRight:
+        case SdrHdlKind::Left:
+        case SdrHdlKind::Right:
+        case SdrHdlKind::LowerLeft:
+        case SdrHdlKind::Lower:
+        case SdrHdlKind::LowerRight:
+        {
+            // if it's an activated TextEdit, it's moved to extended points
+            return !pHdlList || !pHdlList->IsMoveOutside();
+        }
+
+        case SdrHdlKind::Move:      // handle to move object
+        case SdrHdlKind::Poly:      // selected point of polygon or curve
+        case SdrHdlKind::BezierWeight:      // weight at a curve
+        case SdrHdlKind::Circle:      // angle of circle segments, corner radius of rectangles
+        case SdrHdlKind::Ref1:      // reference point 1, e. g. center of rotation
+        case SdrHdlKind::Ref2:      // reference point 2, e. g. endpoint of reflection axis
+        case SdrHdlKind::Glue:      // glue point
+
+        // for SJ and the CustomShapeHandles:
+        case SdrHdlKind::CustomShape1:
+
+        case SdrHdlKind::User:
+        {
+            return true;
+        }
+
+        default:
+        {
+            return false;
+        }
+    }
+}
+
+void SdrHdl::onMouseEnter(const MouseEvent& /*rMEvt*/)
+{
+}
+
+void SdrHdl::onHelpRequest()
+{
+}
+
+void SdrHdl::onMouseLeave()
+{
+}
+
+BitmapEx SdrHdl::createGluePointBitmap()
+{
+    return ImpGetBitmapEx(BitmapMarkerKind::Glue_Deselected, BitmapColorIndex::LightGreen);
+}
+
+void SdrHdl::insertNewlyCreatedOverlayObjectForSdrHdl(
+    std::unique_ptr<sdr::overlay::OverlayObject> pOverlayObject,
+    const sdr::contact::ObjectContact& rObjectContact,
+    sdr::overlay::OverlayManager& rOverlayManager)
+{
+    // check if we have an OverlayObject
+    if(!pOverlayObject)
+    {
+        return;
+    }
+
+    // Add GridOffset for non-linear ViewToDevice transformation (calc)
+    if(nullptr != GetObj() && rObjectContact.supportsGridOffsets())
+    {
+        basegfx::B2DVector aOffset(0.0, 0.0);
+        const sdr::contact::ViewObjectContact& rVOC(GetObj()->GetViewContact().GetViewObjectContact(
+            const_cast<sdr::contact::ObjectContact&>(rObjectContact)));
+
+        rObjectContact.calculateGridOffsetForViewOjectContact(aOffset, rVOC);
+
+        if(!aOffset.equalZero())
+        {
+            pOverlayObject->setOffset(aOffset);
+        }
+    }
+
+    // add to OverlayManager
+    rOverlayManager.add(*pOverlayObject);
+
+    // add to local OverlayObjectList - ownership change (!)
+    maOverlayGroup.append(std::move(pOverlayObject));
+}
+
+SdrHdlColor::SdrHdlColor(const Point& rRef, Color aCol, const Size& rSize, bool bLum)
+:   SdrHdl(rRef, SdrHdlKind::Color),
+    aMarkerSize(rSize),
+    bUseLuminance(bLum)
+{
+    if(IsUseLuminance())
+        aCol = GetLuminance(aCol);
+
+    // remember color
+    aMarkerColor = aCol;
+}
+
+SdrHdlColor::~SdrHdlColor()
+{
+}
+
+void SdrHdlColor::CreateB2dIAObject()
+{
+    // first throw away old one
+    GetRidOfIAObject();
+
+    if(pHdlList)
+    {
+        SdrMarkView* pView = pHdlList->GetView();
+
+        if(pView && !pView->areMarkHandlesHidden())
+        {
+            SdrPageView* pPageView = pView->GetSdrPageView();
+
+            if(pPageView)
+            {
+                for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                {
+                    const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                    if(rPageWindow.GetPaintWindow().OutputToWindow())
+                    {
+                        const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                        if (xManager.is())
+                        {
+                            BitmapEx aBmpCol(CreateColorDropper(aMarkerColor));
+                            basegfx::B2DPoint aPosition(aPos.X(), aPos.Y());
+                            std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(new
+                                sdr::overlay::OverlayBitmapEx(
+                                    aPosition,
+                                    aBmpCol,
+                                    static_cast<sal_uInt16>(aBmpCol.GetSizePixel().Width() - 1) >> 1,
+                                    static_cast<sal_uInt16>(aBmpCol.GetSizePixel().Height() - 1) >> 1
+                                ));
+
+                            // OVERLAYMANAGER
+                            insertNewlyCreatedOverlayObjectForSdrHdl(
+                                std::move(pNewOverlayObject),
+                                rPageWindow.GetObjectContact(),
+                                *xManager);
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+BitmapEx SdrHdlColor::CreateColorDropper(Color aCol)
+{
+    // get the Bitmap
+    VclPtr<VirtualDevice> pWrite(VclPtr<VirtualDevice>::Create());
+    pWrite->SetOutputSizePixel(aMarkerSize);
+    pWrite->SetBackground(aCol);
+    pWrite->Erase();
+
+    // draw outer border
+    sal_Int32 nWidth = aMarkerSize.Width();
+    sal_Int32 nHeight = aMarkerSize.Height();
+
+    pWrite->SetLineColor(COL_LIGHTGRAY);
+    pWrite->DrawLine(Point(0, 0), Point(0, nHeight - 1));
+    pWrite->DrawLine(Point(1, 0), Point(nWidth - 1, 0));
+    pWrite->SetLineColor(COL_GRAY);
+    pWrite->DrawLine(Point(1, nHeight - 1), Point(nWidth - 1, nHeight - 1));
+    pWrite->DrawLine(Point(nWidth - 1, 1), Point(nWidth - 1, nHeight - 2));
+
+    // draw lighter UpperLeft
+    const Color aLightColor(
+        static_cast<sal_uInt8>(::std::min(static_cast<sal_Int16>(static_cast<sal_Int16>(aCol.GetRed()) + sal_Int16(0x0040)), sal_Int16(0x00ff))),
+        static_cast<sal_uInt8>(::std::min(static_cast<sal_Int16>(static_cast<sal_Int16>(aCol.GetGreen()) + sal_Int16(0x0040)), sal_Int16(0x00ff))),
+        static_cast<sal_uInt8>(::std::min(static_cast<sal_Int16>(static_cast<sal_Int16>(aCol.GetBlue()) + sal_Int16(0x0040)), sal_Int16(0x00ff))));
+    pWrite->SetLineColor(aLightColor);
+    pWrite->DrawLine(Point(1, 1), Point(1, nHeight - 2));
+    pWrite->DrawLine(Point(2, 1), Point(nWidth - 2, 1));
+
+    // draw darker LowerRight
+    const Color aDarkColor(
+        static_cast<sal_uInt8>(::std::max(static_cast<sal_Int16>(static_cast<sal_Int16>(aCol.GetRed()) - sal_Int16(0x0040)), sal_Int16(0x0000))),
+        static_cast<sal_uInt8>(::std::max(static_cast<sal_Int16>(static_cast<sal_Int16>(aCol.GetGreen()) - sal_Int16(0x0040)), sal_Int16(0x0000))),
+        static_cast<sal_uInt8>(::std::max(static_cast<sal_Int16>(static_cast<sal_Int16>(aCol.GetBlue()) - sal_Int16(0x0040)), sal_Int16(0x0000))));
+    pWrite->SetLineColor(aDarkColor);
+    pWrite->DrawLine(Point(2, nHeight - 2), Point(nWidth - 2, nHeight - 2));
+    pWrite->DrawLine(Point(nWidth - 2, 2), Point(nWidth - 2, nHeight - 3));
+
+    return pWrite->GetBitmapEx(Point(0,0), aMarkerSize);
+}
+
+Color SdrHdlColor::GetLuminance(const Color& rCol)
+{
+    sal_uInt8 aLum = rCol.GetLuminance();
+    Color aRetval(aLum, aLum, aLum);
+    return aRetval;
+}
+
+void SdrHdlColor::SetColor(Color aNew, bool bCallLink)
+{
+    if(IsUseLuminance())
+        aNew = GetLuminance(aNew);
+
+    if(aMarkerColor != aNew)
+    {
+        // remember new color
+        aMarkerColor = aNew;
+
+        // create new display
+        Touch();
+
+        // tell about change
+        if(bCallLink)
+            aColorChangeHdl.Call(this);
+    }
+}
+
+void SdrHdlColor::SetSize(const Size& rNew)
+{
+    if(rNew != aMarkerSize)
+    {
+        // remember new size
+        aMarkerSize = rNew;
+
+        // create new display
+        Touch();
+    }
+}
+
+SdrHdlGradient::SdrHdlGradient(const Point& rRef1, const Point& rRef2, bool bGrad)
+    : SdrHdl(rRef1, bGrad ? SdrHdlKind::Gradient : SdrHdlKind::Transparence)
+    , pColHdl1(nullptr)
+    , pColHdl2(nullptr)
+    , a2ndPos(rRef2)
+    , bGradient(bGrad)
+    , bMoveSingleHandle(false)
+    , bMoveFirstHandle(false)
+{
+}
+
+SdrHdlGradient::~SdrHdlGradient()
+{
+}
+
+void SdrHdlGradient::Set2ndPos(const Point& rPnt)
+{
+    if(a2ndPos != rPnt)
+    {
+        // remember new position
+        a2ndPos = rPnt;
+
+        // create new display
+        Touch();
+    }
+}
+
+void SdrHdlGradient::CreateB2dIAObject()
+{
+    // first throw away old one
+    GetRidOfIAObject();
+
+    if(pHdlList)
+    {
+        SdrMarkView* pView = pHdlList->GetView();
+
+        if(pView && !pView->areMarkHandlesHidden())
+        {
+            SdrPageView* pPageView = pView->GetSdrPageView();
+
+            if(pPageView)
+            {
+                for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                {
+                    const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                    if(rPageWindow.GetPaintWindow().OutputToWindow())
+                    {
+                        const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                        if (xManager.is())
+                        {
+                            // striped line in between
+                            basegfx::B2DVector aVec(a2ndPos.X() - aPos.X(), a2ndPos.Y() - aPos.Y());
+                            double fVecLen = aVec.getLength();
+                            double fLongPercentArrow = (1.0 - 0.05) * fVecLen;
+                            double fHalfArrowWidth = (0.05 * 0.5) * fVecLen;
+                            aVec.normalize();
+                            basegfx::B2DVector aPerpend(-aVec.getY(), aVec.getX());
+                            sal_Int32 nMidX = static_cast<sal_Int32>(aPos.X() + aVec.getX() * fLongPercentArrow);
+                            sal_Int32 nMidY = static_cast<sal_Int32>(aPos.Y() + aVec.getY() * fLongPercentArrow);
+                            Point aMidPoint(nMidX, nMidY);
+
+                            basegfx::B2DPoint aPosition(aPos.X(), aPos.Y());
+                            basegfx::B2DPoint aMidPos(aMidPoint.X(), aMidPoint.Y());
+
+                            std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(new
+                                sdr::overlay::OverlayLineStriped(
+                                    aPosition, aMidPos
+                                ));
+
+                            pNewOverlayObject->setBaseColor(IsGradient() ? COL_BLACK : COL_BLUE);
+
+                            // OVERLAYMANAGER
+                            insertNewlyCreatedOverlayObjectForSdrHdl(
+                                std::move(pNewOverlayObject),
+                                rPageWindow.GetObjectContact(),
+                                *xManager);
+
+                            // arrowhead
+                            Point aLeft(aMidPoint.X() + static_cast<sal_Int32>(aPerpend.getX() * fHalfArrowWidth),
+                                        aMidPoint.Y() + static_cast<sal_Int32>(aPerpend.getY() * fHalfArrowWidth));
+                            Point aRight(aMidPoint.X() - static_cast<sal_Int32>(aPerpend.getX() * fHalfArrowWidth),
+                                        aMidPoint.Y() - static_cast<sal_Int32>(aPerpend.getY() * fHalfArrowWidth));
+
+                            basegfx::B2DPoint aPositionLeft(aLeft.X(), aLeft.Y());
+                            basegfx::B2DPoint aPositionRight(aRight.X(), aRight.Y());
+                            basegfx::B2DPoint aPosition2(a2ndPos.X(), a2ndPos.Y());
+
+                            pNewOverlayObject.reset(new
+                                sdr::overlay::OverlayTriangle(
+                                    aPositionLeft,
+                                    aPosition2,
+                                    aPositionRight,
+                                    IsGradient() ? COL_BLACK : COL_BLUE
+                                ));
+
+                            // OVERLAYMANAGER
+                            insertNewlyCreatedOverlayObjectForSdrHdl(
+                                std::move(pNewOverlayObject),
+                                rPageWindow.GetObjectContact(),
+                                *xManager);
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+IMPL_LINK_NOARG(SdrHdlGradient, ColorChangeHdl, SdrHdlColor*, void)
+{
+    if(GetObj())
+        FromIAOToItem(GetObj(), true, true);
+}
+
+void SdrHdlGradient::FromIAOToItem(SdrObject* _pObj, bool bSetItemOnObject, bool bUndo)
+{
+    // from IAO positions and colors to gradient
+    const SfxItemSet& rSet = _pObj->GetMergedItemSet();
+
+    GradTransGradient aOldGradTransGradient;
+    GradTransGradient aGradTransGradient;
+    GradTransVector aGradTransVector;
+
+    OUString aString;
+
+    aGradTransVector.maPositionA = basegfx::B2DPoint(GetPos().X(), GetPos().Y());
+    aGradTransVector.maPositionB = basegfx::B2DPoint(Get2ndPos().X(), Get2ndPos().Y());
+    if(pColHdl1)
+        aGradTransVector.aCol1 = pColHdl1->GetColor();
+    if(pColHdl2)
+        aGradTransVector.aCol2 = pColHdl2->GetColor();
+
+    if(IsGradient())
+        aOldGradTransGradient.aGradient = rSet.Get(XATTR_FILLGRADIENT).GetGradientValue();
+    else
+        aOldGradTransGradient.aGradient = rSet.Get(XATTR_FILLFLOATTRANSPARENCE).GetGradientValue();
+
+    // transform vector data to gradient
+    GradTransformer::VecToGrad(aGradTransVector, aGradTransGradient, aOldGradTransGradient, _pObj, bMoveSingleHandle, bMoveFirstHandle);
+
+    if(bSetItemOnObject)
+    {
+        SdrModel& rModel(_pObj->getSdrModelFromSdrObject());
+        SfxItemSet aNewSet(rModel.GetItemPool());
+
+        if(IsGradient())
+        {
+            aString.clear();
+            XFillGradientItem aNewGradItem(aString, aGradTransGradient.aGradient);
+            aNewSet.Put(aNewGradItem);
+        }
+        else
+        {
+            aString.clear();
+            XFillFloatTransparenceItem aNewTransItem(aString, aGradTransGradient.aGradient);
+            aNewSet.Put(aNewTransItem);
+        }
+
+        if(bUndo && rModel.IsUndoEnabled())
+        {
+            rModel.BegUndo(SvxResId(IsGradient() ? SIP_XA_FILLGRADIENT : SIP_XA_FILLTRANSPARENCE));
+            rModel.AddUndo(rModel.GetSdrUndoFactory().CreateUndoAttrObject(*_pObj));
+            rModel.EndUndo();
+        }
+
+        pObj->SetMergedItemSetAndBroadcast(aNewSet);
+    }
+
+    // back transformation, set values on pIAOHandle
+    GradTransformer::GradToVec(aGradTransGradient, aGradTransVector, _pObj);
+
+    SetPos(Point(FRound(aGradTransVector.maPositionA.getX()), FRound(aGradTransVector.maPositionA.getY())));
+    Set2ndPos(Point(FRound(aGradTransVector.maPositionB.getX()), FRound(aGradTransVector.maPositionB.getY())));
+    if(pColHdl1)
+    {
+        pColHdl1->SetPos(Point(FRound(aGradTransVector.maPositionA.getX()), FRound(aGradTransVector.maPositionA.getY())));
+        pColHdl1->SetColor(aGradTransVector.aCol1);
+    }
+    if(pColHdl2)
+    {
+        pColHdl2->SetPos(Point(FRound(aGradTransVector.maPositionB.getX()), FRound(aGradTransVector.maPositionB.getY())));
+        pColHdl2->SetColor(aGradTransVector.aCol2);
+    }
+}
+
+
+SdrHdlLine::~SdrHdlLine() {}
+
+void SdrHdlLine::CreateB2dIAObject()
+{
+    // first throw away old one
+    GetRidOfIAObject();
+
+    if(pHdlList)
+    {
+        SdrMarkView* pView = pHdlList->GetView();
+
+        if(pView && !pView->areMarkHandlesHidden() && pHdl1 && pHdl2)
+        {
+            SdrPageView* pPageView = pView->GetSdrPageView();
+
+            if(pPageView)
+            {
+                for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                {
+                    const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                    if(rPageWindow.GetPaintWindow().OutputToWindow())
+                    {
+                        const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                        if (xManager.is())
+                        {
+                            basegfx::B2DPoint aPosition1(pHdl1->GetPos().X(), pHdl1->GetPos().Y());
+                            basegfx::B2DPoint aPosition2(pHdl2->GetPos().X(), pHdl2->GetPos().Y());
+
+                            std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(new
+                                sdr::overlay::OverlayLineStriped(
+                                    aPosition1,
+                                    aPosition2
+                                ));
+
+                            // color(?)
+                            pNewOverlayObject->setBaseColor(COL_LIGHTRED);
+
+                            // OVERLAYMANAGER
+                            insertNewlyCreatedOverlayObjectForSdrHdl(
+                                std::move(pNewOverlayObject),
+                                rPageWindow.GetObjectContact(),
+                                *xManager);
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+PointerStyle SdrHdlLine::GetPointer() const
+{
+    return PointerStyle::RefHand;
+}
+
+
+SdrHdlBezWgt::~SdrHdlBezWgt() {}
+
+void SdrHdlBezWgt::CreateB2dIAObject()
+{
+    // call parent
+    SdrHdl::CreateB2dIAObject();
+
+    // create lines
+    if(pHdlList)
+    {
+        SdrMarkView* pView = pHdlList->GetView();
+
+        if(pView && !pView->areMarkHandlesHidden())
+        {
+            SdrPageView* pPageView = pView->GetSdrPageView();
+
+            if(pPageView)
+            {
+                for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                {
+                    const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                    if(rPageWindow.GetPaintWindow().OutputToWindow())
+                    {
+                        const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                        if (xManager.is())
+                        {
+                            basegfx::B2DPoint aPosition1(pHdl1->GetPos().X(), pHdl1->GetPos().Y());
+                            basegfx::B2DPoint aPosition2(aPos.X(), aPos.Y());
+
+                            if(!aPosition1.equal(aPosition2))
+                            {
+                                std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(new
+                                    sdr::overlay::OverlayLineStriped(
+                                        aPosition1,
+                                        aPosition2
+                                    ));
+
+                                // line part is not hittable
+                                pNewOverlayObject->setHittable(false);
+
+                                // color(?)
+                                pNewOverlayObject->setBaseColor(COL_LIGHTBLUE);
+
+                                // OVERLAYMANAGER
+                                insertNewlyCreatedOverlayObjectForSdrHdl(
+                                    std::move(pNewOverlayObject),
+                                    rPageWindow.GetObjectContact(),
+                                    *xManager);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+
+E3dVolumeMarker::E3dVolumeMarker(const basegfx::B2DPolyPolygon& rWireframePoly)
+{
+    aWireframePoly = rWireframePoly;
+}
+
+void E3dVolumeMarker::CreateB2dIAObject()
+{
+    // create lines
+    if(pHdlList)
+    {
+        SdrMarkView* pView = pHdlList->GetView();
+
+        if(pView && !pView->areMarkHandlesHidden())
+        {
+            SdrPageView* pPageView = pView->GetSdrPageView();
+
+            if(pPageView)
+            {
+                for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                {
+                    const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                    if(rPageWindow.GetPaintWindow().OutputToWindow())
+                    {
+                        const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                        if (xManager.is() && aWireframePoly.count())
+                        {
+                            std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(new
+                                sdr::overlay::OverlayPolyPolygonStripedAndFilled(
+                                    aWireframePoly));
+
+                            pNewOverlayObject->setBaseColor(COL_BLACK);
+
+                            // OVERLAYMANAGER
+                            insertNewlyCreatedOverlayObjectForSdrHdl(
+                                std::move(pNewOverlayObject),
+                                rPageWindow.GetObjectContact(),
+                                *xManager);
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+
+ImpEdgeHdl::~ImpEdgeHdl()
+{
+}
+
+void ImpEdgeHdl::CreateB2dIAObject()
+{
+    if(nObjHdlNum <= 1 && pObj)
+    {
+        // first throw away old one
+        GetRidOfIAObject();
+
+        BitmapColorIndex eColIndex = BitmapColorIndex::LightCyan;
+        BitmapMarkerKind eKindOfMarker = BitmapMarkerKind::Rect_7x7;
+
+        if(pHdlList)
+        {
+            SdrMarkView* pView = pHdlList->GetView();
+
+            if(pView && !pView->areMarkHandlesHidden())
+            {
+                const SdrEdgeObj* pEdge = static_cast<SdrEdgeObj*>(pObj);
+
+                if(pEdge->GetConnectedNode(nObjHdlNum == 0) != nullptr)
+                    eColIndex = BitmapColorIndex::LightRed;
+
+                if(nPPntNum < 2)
+                {
+                    // Handle with plus sign inside
+                    eKindOfMarker = BitmapMarkerKind::Circ_7x7;
+                }
+
+                SdrPageView* pPageView = pView->GetSdrPageView();
+
+                if(pPageView)
+                {
+                    for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                    {
+                        const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                        if(rPageWindow.GetPaintWindow().OutputToWindow())
+                        {
+                            const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                            if (xManager.is())
+                            {
+                                basegfx::B2DPoint aPosition(aPos.X(), aPos.Y());
+                                std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(CreateOverlayObject(
+                                    aPosition,
+                                    eColIndex,
+                                    eKindOfMarker));
+
+                                // OVERLAYMANAGER
+                                insertNewlyCreatedOverlayObjectForSdrHdl(
+                                    std::move(pNewOverlayObject),
+                                    rPageWindow.GetObjectContact(),
+                                    *xManager);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+    else
+    {
+        // call parent
+        SdrHdl::CreateB2dIAObject();
+    }
+}
+
+void ImpEdgeHdl::SetLineCode(SdrEdgeLineCode eCode)
+{
+    if(eLineCode != eCode)
+    {
+        // remember new value
+        eLineCode = eCode;
+
+        // create new display
+        Touch();
+    }
+}
+
+PointerStyle ImpEdgeHdl::GetPointer() const
+{
+    SdrEdgeObj* pEdge=dynamic_cast<SdrEdgeObj*>( pObj );
+    if (pEdge==nullptr)
+        return SdrHdl::GetPointer();
+    if (nObjHdlNum<=1)
+        return PointerStyle::MovePoint;
+    if (IsHorzDrag())
+        return PointerStyle::ESize;
+    else
+        return PointerStyle::SSize;
+}
+
+bool ImpEdgeHdl::IsHorzDrag() const
+{
+    SdrEdgeObj* pEdge=dynamic_cast<SdrEdgeObj*>( pObj );
+    if (pEdge==nullptr)
+        return false;
+    if (nObjHdlNum<=1)
+        return false;
+
+    SdrEdgeKind eEdgeKind = pEdge->GetObjectItem(SDRATTR_EDGEKIND).GetValue();
+
+    const SdrEdgeInfoRec& rInfo=pEdge->aEdgeInfo;
+    if (eEdgeKind==SdrEdgeKind::OrthoLines || eEdgeKind==SdrEdgeKind::Bezier)
+    {
+        return !rInfo.ImpIsHorzLine(eLineCode,*pEdge->pEdgeTrack);
+    }
+    else if (eEdgeKind==SdrEdgeKind::ThreeLines)
+    {
+        long nAngle=nObjHdlNum==2 ? rInfo.nAngle1 : rInfo.nAngle2;
+        return nAngle==0 || nAngle==18000;
+    }
+    return false;
+}
+
+
+ImpMeasureHdl::~ImpMeasureHdl()
+{
+}
+
+void ImpMeasureHdl::CreateB2dIAObject()
+{
+    // first throw away old one
+    GetRidOfIAObject();
+
+    if(pHdlList)
+    {
+        SdrMarkView* pView = pHdlList->GetView();
+
+        if(pView && !pView->areMarkHandlesHidden())
+        {
+            BitmapColorIndex eColIndex = BitmapColorIndex::LightCyan;
+            BitmapMarkerKind eKindOfMarker = BitmapMarkerKind::Rect_9x9;
+
+            if(nObjHdlNum > 1)
+            {
+                eKindOfMarker = BitmapMarkerKind::Rect_7x7;
+            }
+
+            if(bSelect)
+            {
+                eColIndex = BitmapColorIndex::Cyan;
+            }
+
+            SdrPageView* pPageView = pView->GetSdrPageView();
+
+            if(pPageView)
+            {
+                for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                {
+                    const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                    if(rPageWindow.GetPaintWindow().OutputToWindow())
+                    {
+                        const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                        if (xManager.is())
+                        {
+                            basegfx::B2DPoint aPosition(aPos.X(), aPos.Y());
+                            std::unique_ptr<sdr::overlay::OverlayObject> pNewOverlayObject(CreateOverlayObject(
+                                aPosition,
+                                eColIndex,
+                                eKindOfMarker));
+
+                            // OVERLAYMANAGER
+                            insertNewlyCreatedOverlayObjectForSdrHdl(
+                                std::move(pNewOverlayObject),
+                                rPageWindow.GetObjectContact(),
+                                *xManager);
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+PointerStyle ImpMeasureHdl::GetPointer() const
+{
+    switch (nObjHdlNum)
+    {
+        case 0: case 1: return PointerStyle::Hand;
+        case 2: case 3: return PointerStyle::MovePoint;
+        case 4: case 5: return SdrHdl::GetPointer(); // will then be rotated appropriately
+    } // switch
+    return PointerStyle::NotAllowed;
+}
+
+
+ImpTextframeHdl::ImpTextframeHdl(const tools::Rectangle& rRect) :
+    SdrHdl(rRect.TopLeft(),SdrHdlKind::Move),
+    maRect(rRect)
+{
+}
+
+void ImpTextframeHdl::CreateB2dIAObject()
+{
+    // first throw away old one
+    GetRidOfIAObject();
+
+    if(pHdlList)
+    {
+        SdrMarkView* pView = pHdlList->GetView();
+
+        if(pView && !pView->areMarkHandlesHidden())
+        {
+            SdrPageView* pPageView = pView->GetSdrPageView();
+
+            if(pPageView)
+            {
+                for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+                {
+                    const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+                    if(rPageWindow.GetPaintWindow().OutputToWindow())
+                    {
+                        const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                        if (xManager.is())
+                        {
+                            const basegfx::B2DPoint aTopLeft(maRect.Left(), maRect.Top());
+                            const basegfx::B2DPoint aBottomRight(maRect.Right(), maRect.Bottom());
+                            const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+                            const Color aHilightColor(aSvtOptionsDrawinglayer.getHilightColor());
+                            const double fTransparence(aSvtOptionsDrawinglayer.GetTransparentSelectionPercent() * 0.01);
+
+                            std::unique_ptr<sdr::overlay::OverlayRectangle> pNewOverlayObject(new sdr::overlay::OverlayRectangle(
+                                aTopLeft,
+                                aBottomRight,
+                                aHilightColor,
+                                fTransparence,
+                                3.0,
+                                3.0,
+                                nRotationAngle * -F_PI18000,
+                                true)); // allow animation; the Handle is not shown at text edit time
+
+                            pNewOverlayObject->setHittable(false);
+
+                            // OVERLAYMANAGER
+                            insertNewlyCreatedOverlayObjectForSdrHdl(
+                                std::move(pNewOverlayObject),
+                                rPageWindow.GetObjectContact(),
+                                *xManager);
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+
+static bool ImpSdrHdlListSorter(std::unique_ptr<SdrHdl> const& lhs, std::unique_ptr<SdrHdl> const& rhs)
+{
+    SdrHdlKind eKind1=lhs->GetKind();
+    SdrHdlKind eKind2=rhs->GetKind();
+    // Level 1: first normal handles, then Glue, then User, then Plus handles, then reference point handles
+    unsigned n1=1;
+    unsigned n2=1;
+    if (eKind1!=eKind2)
+    {
+        if (eKind1==SdrHdlKind::Ref1 || eKind1==SdrHdlKind::Ref2 || eKind1==SdrHdlKind::MirrorAxis) n1=5;
+        else if (eKind1==SdrHdlKind::Glue) n1=2;
+        else if (eKind1==SdrHdlKind::User) n1=3;
+        else if (eKind1==SdrHdlKind::SmartTag) n1=0;
+        if (eKind2==SdrHdlKind::Ref1 || eKind2==SdrHdlKind::Ref2 || eKind2==SdrHdlKind::MirrorAxis) n2=5;
+        else if (eKind2==SdrHdlKind::Glue) n2=2;
+        else if (eKind2==SdrHdlKind::User) n2=3;
+        else if (eKind2==SdrHdlKind::SmartTag) n2=0;
+    }
+    if (lhs->IsPlusHdl()) n1=4;
+    if (rhs->IsPlusHdl()) n2=4;
+    if (n1==n2)
+    {
+        // Level 2: PageView (Pointer)
+        SdrPageView* pPV1=lhs->GetPageView();
+        SdrPageView* pPV2=rhs->GetPageView();
+        if (pPV1==pPV2)
+        {
+            // Level 3: Position (x+y)
+            SdrObject* pObj1=lhs->GetObj();
+            SdrObject* pObj2=rhs->GetObj();
+            if (pObj1==pObj2)
+            {
+                sal_uInt32 nNum1=lhs->GetObjHdlNum();
+                sal_uInt32 nNum2=rhs->GetObjHdlNum();
+                if (nNum1==nNum2)
+                {
+                    if (eKind1==eKind2)
+                        return lhs<rhs; // Hack, to always get to the same sorting
+                    return static_cast<sal_uInt16>(eKind1)<static_cast<sal_uInt16>(eKind2);
+                }
+                else
+                    return nNum1<nNum2;
+            }
+            else
+            {
+                return pObj1<pObj2;
+            }
+        }
+        else
+        {
+            return pPV1<pPV2;
+        }
+    }
+    else
+    {
+        return n1<n2;
+    }
+}
+
+namespace {
+
+// Helper struct for re-sorting handles
+struct ImplHdlAndIndex
+{
+    SdrHdl*                     mpHdl;
+    sal_uInt32                  mnIndex;
+};
+
+}
+
+extern "C" {
+
+// Helper method for sorting handles taking care of OrdNums, keeping order in
+// single objects and re-sorting polygon handles intuitively
+static int ImplSortHdlFunc( const void* pVoid1, const void* pVoid2 )
+{
+    const ImplHdlAndIndex* p1 = static_cast<ImplHdlAndIndex const *>(pVoid1);
+    const ImplHdlAndIndex* p2 = static_cast<ImplHdlAndIndex const *>(pVoid2);
+
+    if(p1->mpHdl->GetObj() == p2->mpHdl->GetObj())
+    {
+        if(p1->mpHdl->GetObj() && dynamic_cast<const SdrPathObj*>(p1->mpHdl->GetObj()) != nullptr)
+        {
+            // same object and a path object
+            if((p1->mpHdl->GetKind() == SdrHdlKind::Poly || p1->mpHdl->GetKind() == SdrHdlKind::BezierWeight)
+                && (p2->mpHdl->GetKind() == SdrHdlKind::Poly || p2->mpHdl->GetKind() == SdrHdlKind::BezierWeight))
+            {
+                // both handles are point or control handles
+                if(p1->mpHdl->GetPolyNum() == p2->mpHdl->GetPolyNum())
+                {
+                    if(p1->mpHdl->GetPointNum() < p2->mpHdl->GetPointNum())
+                    {
+                        return -1;
+                    }
+                    else
+                    {
+                        return 1;
+                    }
+                }
+                else if(p1->mpHdl->GetPolyNum() < p2->mpHdl->GetPolyNum())
+                {
+                    return -1;
+                }
+                else
+                {
+                    return 1;
+                }
+            }
+        }
+    }
+    else
+    {
+        if(!p1->mpHdl->GetObj())
+        {
+            return -1;
+        }
+        else if(!p2->mpHdl->GetObj())
+        {
+            return 1;
+        }
+        else
+        {
+            // different objects, use OrdNum for sort
+            const sal_uInt32 nOrdNum1 = p1->mpHdl->GetObj()->GetOrdNum();
+            const sal_uInt32 nOrdNum2 = p2->mpHdl->GetObj()->GetOrdNum();
+
+            if(nOrdNum1 < nOrdNum2)
+            {
+                return -1;
+            }
+            else
+            {
+                return 1;
+            }
+        }
+    }
+
+    // fallback to indices
+    if(p1->mnIndex < p2->mnIndex)
+    {
+        return -1;
+    }
+    else
+    {
+        return 1;
+    }
+}
+
+}
+
+void SdrHdlList::TravelFocusHdl(bool bForward)
+{
+    // security correction
+    if (mnFocusIndex >= GetHdlCount())
+        mnFocusIndex = SAL_MAX_SIZE;
+
+    if(maList.empty())
+        return;
+
+    // take care of old handle
+    const size_t nOldHdlNum(mnFocusIndex);
+    SdrHdl* pOld = nullptr;
+    if (nOldHdlNum < GetHdlCount())
+        pOld = GetHdl(nOldHdlNum);
+
+    if(pOld)
+    {
+        // switch off old handle
+        mnFocusIndex = SAL_MAX_SIZE;
+        pOld->Touch();
+    }
+
+    // allocate pointer array for sorted handle list
+    std::unique_ptr<ImplHdlAndIndex[]> pHdlAndIndex(new ImplHdlAndIndex[maList.size()]);
+
+    // build sorted handle list
+    for( size_t a = 0; a < maList.size(); ++a)
+    {
+        pHdlAndIndex[a].mpHdl = maList[a].get();
+        pHdlAndIndex[a].mnIndex = a;
+    }
+
+    qsort(pHdlAndIndex.get(), maList.size(), sizeof(ImplHdlAndIndex), ImplSortHdlFunc);
+
+    // look for old num in sorted array
+    size_t nOldHdl(nOldHdlNum);
+
+    if(nOldHdlNum != SAL_MAX_SIZE)
+    {
+        for(size_t a = 0; a < maList.size(); ++a)
+        {
+            if(pHdlAndIndex[a].mpHdl == pOld)
+            {
+                nOldHdl = a;
+                break;
+            }
+        }
+    }
+
+    // build new HdlNum
+    size_t nNewHdl(nOldHdl);
+
+    // do the focus travel
+    if(bForward)
+    {
+        if(nOldHdl != SAL_MAX_SIZE)
+        {
+            if(nOldHdl == maList.size() - 1)
+            {
+                // end forward run
+                nNewHdl = SAL_MAX_SIZE;
+            }
+            else
+            {
+                // simply the next handle
+                nNewHdl++;
+            }
+        }
+        else
+        {
+            // start forward run at first entry
+            nNewHdl = 0;
+        }
+    }
+    else
+    {
+        if(nOldHdl == SAL_MAX_SIZE)
+        {
+            // start backward run at last entry
+            nNewHdl = maList.size() - 1;
+
+        }
+        else
+        {
+            if(nOldHdl == 0)
+            {
+                // end backward run
+                nNewHdl = SAL_MAX_SIZE;
+            }
+            else
+            {
+                // simply the previous handle
+                nNewHdl--;
+            }
+        }
+    }
+
+    // build new HdlNum
+    sal_uIntPtr nNewHdlNum(nNewHdl);
+
+    // look for old num in sorted array
+    if(nNewHdl != SAL_MAX_SIZE)
+    {
+        SdrHdl* pNew = pHdlAndIndex[nNewHdl].mpHdl;
+
+        for(size_t a = 0; a < maList.size(); ++a)
+        {
+            if(maList[a].get() == pNew)
+            {
+                nNewHdlNum = a;
+                break;
+            }
+        }
+    }
+
+    // take care of next handle
+    if(nOldHdlNum != nNewHdlNum)
+    {
+        mnFocusIndex = nNewHdlNum;
+        if (mnFocusIndex < GetHdlCount())
+        {
+            SdrHdl* pNew = GetHdl(mnFocusIndex);
+            pNew->Touch();
+        }
+    }
+}
+
+SdrHdl* SdrHdlList::GetFocusHdl() const
+{
+    if(mnFocusIndex < GetHdlCount())
+        return GetHdl(mnFocusIndex);
+    else
+        return nullptr;
+}
+
+void SdrHdlList::SetFocusHdl(SdrHdl* pNew)
+{
+    if(pNew)
+    {
+        SdrHdl* pActual = GetFocusHdl();
+
+        if(!pActual || pActual != pNew)
+        {
+            const size_t nNewHdlNum = GetHdlNum(pNew);
+
+            if(nNewHdlNum != SAL_MAX_SIZE)
+            {
+                mnFocusIndex = nNewHdlNum;
+
+                if(pActual)
+                {
+                    pActual->Touch();
+                }
+
+                pNew->Touch();
+            }
+        }
+    }
+}
+
+void SdrHdlList::ResetFocusHdl()
+{
+    SdrHdl* pHdl = GetFocusHdl();
+
+    mnFocusIndex = SAL_MAX_SIZE;
+
+    if(pHdl)
+    {
+        pHdl->Touch();
+    }
+}
+
+
+SdrHdlList::SdrHdlList(SdrMarkView* pV)
+:   mnFocusIndex(SAL_MAX_SIZE),
+    pView(pV)
+{
+    nHdlSize = 3;
+    bRotateShear = false;
+    bMoveOutside = false;
+    bDistortShear = false;
+}
+
+SdrHdlList::~SdrHdlList()
+{
+    Clear();
+}
+
+void SdrHdlList::SetHdlSize(sal_uInt16 nSiz)
+{
+    if(nHdlSize != nSiz)
+    {
+        // remember new value
+        nHdlSize = nSiz;
+
+        // propagate change to IAOs
+        for(size_t i=0; i<GetHdlCount(); ++i)
+        {
+            SdrHdl* pHdl = GetHdl(i);
+            pHdl->Touch();
+        }
+    }
+}
+
+void SdrHdlList::SetMoveOutside(bool bOn)
+{
+    if(bMoveOutside != bOn)
+    {
+        // remember new value
+        bMoveOutside = bOn;
+
+        // propagate change to IAOs
+        for(size_t i=0; i<GetHdlCount(); ++i)
+        {
+            SdrHdl* pHdl = GetHdl(i);
+            pHdl->Touch();
+        }
+    }
+}
+
+void SdrHdlList::SetRotateShear(bool bOn)
+{
+    bRotateShear = bOn;
+}
+
+void SdrHdlList::SetDistortShear(bool bOn)
+{
+    bDistortShear = bOn;
+}
+
+std::unique_ptr<SdrHdl> SdrHdlList::RemoveHdl(size_t nNum)
+{
+    std::unique_ptr<SdrHdl> pRetval = std::move(maList[nNum]);
+    maList.erase(maList.begin() + nNum);
+
+    return pRetval;
+}
+
+void SdrHdlList::RemoveAllByKind(SdrHdlKind eKind)
+{
+    maList.erase(std::remove_if(maList.begin(), maList.end(),
+        [&eKind](std::unique_ptr<SdrHdl>& rItem) { return rItem->GetKind() == eKind; }),
+        maList.end());
+}
+
+void SdrHdlList::Clear()
+{
+    maList.clear();
+
+    bRotateShear=false;
+    bDistortShear=false;
+}
+
+void SdrHdlList::Sort()
+{
+    // remember currently focused handle
+    SdrHdl* pPrev = GetFocusHdl();
+
+    std::sort( maList.begin(), maList.end(), ImpSdrHdlListSorter );
+
+    // get now and compare
+    SdrHdl* pNow = GetFocusHdl();
+
+    if(pPrev != pNow)
+    {
+
+        if(pPrev)
+        {
+            pPrev->Touch();
+        }
+
+        if(pNow)
+        {
+            pNow->Touch();
+        }
+    }
+}
+
+size_t SdrHdlList::GetHdlNum(const SdrHdl* pHdl) const
+{
+    if (pHdl==nullptr)
+        return SAL_MAX_SIZE;
+    auto it = std::find_if( maList.begin(), maList.end(),
+        [&](const std::unique_ptr<SdrHdl> & p) { return p.get() == pHdl; });
+    assert(it != maList.end());
+    if( it == maList.end() )
+        return SAL_MAX_SIZE;
+    return it - maList.begin();
+}
+
+void SdrHdlList::AddHdl(std::unique_ptr<SdrHdl> pHdl)
+{
+    assert(pHdl);
+    pHdl->SetHdlList(this);
+    maList.push_back(std::move(pHdl));
+}
+
+SdrHdl* SdrHdlList::IsHdlListHit(const Point& rPnt) const
+{
+    SdrHdl* pRet=nullptr;
+    const size_t nCount=GetHdlCount();
+    size_t nNum=nCount;
+    while (nNum>0 && pRet==nullptr)
+    {
+        nNum--;
+        SdrHdl* pHdl=GetHdl(nNum);
+        if (pHdl->IsHdlHit(rPnt))
+            pRet=pHdl;
+    }
+    return pRet;
+}
+
+SdrHdl* SdrHdlList::GetHdl(SdrHdlKind eKind1) const
+{
+    SdrHdl* pRet=nullptr;
+    for (size_t i=0; i<GetHdlCount() && pRet==nullptr; ++i)
+    {
+        SdrHdl* pHdl=GetHdl(i);
+        if (pHdl->GetKind()==eKind1)
+            pRet=pHdl;
+    }
+    return pRet;
+}
+
+void SdrHdlList::MoveTo(SdrHdlList& rOther)
+{
+    for (auto & pHdl : maList)
+        pHdl->SetHdlList(&rOther);
+    rOther.maList.insert(rOther.maList.end(),
+        std::make_move_iterator(maList.begin()), std::make_move_iterator(maList.end()));
+    maList.clear();
+}
+
+SdrCropHdl::SdrCropHdl(
+    const Point& rPnt,
+    SdrHdlKind eNewKind,
+    double fShearX,
+    double fRotation)
+:   SdrHdl(rPnt, eNewKind),
+    mfShearX(fShearX),
+    mfRotation(fRotation)
+{
+}
+
+
+BitmapEx SdrCropHdl::GetBitmapForHandle( const BitmapEx& rBitmap, int nSize )
+{
+    int nPixelSize = 0, nX = 0, nY = 0, nOffset = 0;
+
+    if( nSize <= 3 )
+    {
+        nPixelSize = 13;
+        nOffset = 0;
+    }
+    else if( nSize <=4 )
+    {
+        nPixelSize = 17;
+        nOffset = 39;
+    }
+    else
+    {
+        nPixelSize = 21;
+        nOffset = 90;
+    }
+
+    switch( eKind )
+    {
+        case SdrHdlKind::UpperLeft: nX = 0; nY = 0; break;
+        case SdrHdlKind::Upper: nX = 1; nY = 0; break;
+        case SdrHdlKind::UpperRight: nX = 2; nY = 0; break;
+        case SdrHdlKind::Left:  nX = 0; nY = 1; break;
+        case SdrHdlKind::Right: nX = 2; nY = 1; break;
+        case SdrHdlKind::LowerLeft: nX = 0; nY = 2; break;
+        case SdrHdlKind::Lower: nX = 1; nY = 2; break;
+        case SdrHdlKind::LowerRight: nX = 2; nY = 2; break;
+        default: break;
+    }
+
+    tools::Rectangle aSourceRect( Point( nX * nPixelSize + nOffset,  nY * nPixelSize), Size(nPixelSize, nPixelSize) );
+
+    BitmapEx aRetval(rBitmap);
+    aRetval.Crop(aSourceRect);
+    return aRetval;
+}
+
+
+void SdrCropHdl::CreateB2dIAObject()
+{
+    // first throw away old one
+    GetRidOfIAObject();
+
+    SdrMarkView* pView = pHdlList ? pHdlList->GetView() : nullptr;
+    SdrPageView* pPageView = pView ? pView->GetSdrPageView() : nullptr;
+
+    if( pPageView && !pView->areMarkHandlesHidden() )
+    {
+        const StyleSettings& rStyleSettings = Application::GetSettings().GetStyleSettings();
+        int nHdlSize = pHdlList->GetHdlSize();
+
+        const BitmapEx aHandlesBitmap(SIP_SA_CROP_MARKERS);
+        BitmapEx aBmpEx1( GetBitmapForHandle( aHandlesBitmap, nHdlSize ) );
+
+        for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+        {
+            const SdrPageWindow& rPageWindow = *pPageView->GetPageWindow(b);
+
+            if(rPageWindow.GetPaintWindow().OutputToWindow())
+            {
+                const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+                if (xManager.is())
+                {
+                    basegfx::B2DPoint aPosition(aPos.X(), aPos.Y());
+
+                    std::unique_ptr<sdr::overlay::OverlayObject> pOverlayObject;
+
+                    // animate focused handles
+                    if(IsFocusHdl() && (pHdlList->GetFocusHdl() == this))
+                    {
+                        if( nHdlSize >= 2 )
+                            nHdlSize = 1;
+
+                        BitmapEx aBmpEx2( GetBitmapForHandle( aHandlesBitmap, nHdlSize + 1 ) );
+
+                        const sal_uInt64 nBlinkTime = rStyleSettings.GetCursorBlinkTime();
+
+                        pOverlayObject.reset(new sdr::overlay::OverlayAnimatedBitmapEx(
+                            aPosition,
+                            aBmpEx1,
+                            aBmpEx2,
+                            nBlinkTime,
+                            static_cast<sal_uInt16>(aBmpEx1.GetSizePixel().Width() - 1) >> 1,
+                            static_cast<sal_uInt16>(aBmpEx1.GetSizePixel().Height() - 1) >> 1,
+                            static_cast<sal_uInt16>(aBmpEx2.GetSizePixel().Width() - 1) >> 1,
+                            static_cast<sal_uInt16>(aBmpEx2.GetSizePixel().Height() - 1) >> 1,
+                            mfShearX,
+                            mfRotation));
+                    }
+                    else
+                    {
+                        // create centered handle as default
+                        pOverlayObject.reset(new sdr::overlay::OverlayBitmapEx(
+                            aPosition,
+                            aBmpEx1,
+                            static_cast<sal_uInt16>(aBmpEx1.GetSizePixel().Width() - 1) >> 1,
+                            static_cast<sal_uInt16>(aBmpEx1.GetSizePixel().Height() - 1) >> 1,
+                            0.0,
+                            mfShearX,
+                            mfRotation));
+                    }
+
+                    // OVERLAYMANAGER
+                    insertNewlyCreatedOverlayObjectForSdrHdl(
+                        std::move(pOverlayObject),
+                        rPageWindow.GetObjectContact(),
+                        *xManager);
+                }
+            }
+        }
+    }
+}
+
+
+// with the correction of crop handling I could get rid of the extra mirroring flag, adapted stuff
+// accordingly
+
+SdrCropViewHdl::SdrCropViewHdl(
+    const basegfx::B2DHomMatrix& rObjectTransform,
+    const Graphic& rGraphic,
+    double fCropLeft,
+    double fCropTop,
+    double fCropRight,
+    double fCropBottom)
+:   SdrHdl(Point(), SdrHdlKind::User),
+    maObjectTransform(rObjectTransform),
+    maGraphic(rGraphic),
+    mfCropLeft(fCropLeft),
+    mfCropTop(fCropTop),
+    mfCropRight(fCropRight),
+    mfCropBottom(fCropBottom)
+{
+}
+
+namespace {
+
+void translateRotationToMirroring(basegfx::B2DVector & scale, double * rotate) {
+    assert(rotate != nullptr);
+
+    // detect 180 degree rotation, this is the same as mirrored in X and Y,
+    // thus change to mirroring. Prefer mirroring here. Use the equal call
+    // with getSmallValue here, the original which uses rtl::math::approxEqual
+    // is too correct here. Maybe this changes with enhanced precision in aw080
+    // to the better so that this can be reduced to the more precise call again
+    if(basegfx::fTools::equal(fabs(*rotate), F_PI, 0.000000001))
+    {
+        scale.setX(scale.getX() * -1.0);
+        scale.setY(scale.getY() * -1.0);
+        *rotate = 0.0;
+    }
+}
+
+}
+
+void SdrCropViewHdl::CreateB2dIAObject()
+{
+    GetRidOfIAObject();
+    SdrMarkView* pView = pHdlList ? pHdlList->GetView() : nullptr;
+    SdrPageView* pPageView = pView ? pView->GetSdrPageView() : nullptr;
+
+    if(!pPageView || pView->areMarkHandlesHidden())
+    {
+        return;
+    }
+
+    // decompose to have current translate and scale
+    basegfx::B2DVector aScale, aTranslate;
+    double fRotate, fShearX;
+
+    maObjectTransform.decompose(aScale, aTranslate, fRotate, fShearX);
+
+    if(aScale.equalZero())
+    {
+        return;
+    }
+
+    translateRotationToMirroring(aScale, &fRotate);
+
+    // remember mirroring, reset at Scale and adapt crop values for usage;
+    // mirroring can stay in the object transformation, so do not have to
+    // cope with it here (except later for the CroppedImage transformation,
+    // see below)
+    const bool bMirroredX(aScale.getX() < 0.0);
+    const bool bMirroredY(aScale.getY() < 0.0);
+    double fCropLeft(mfCropLeft);
+    double fCropTop(mfCropTop);
+    double fCropRight(mfCropRight);
+    double fCropBottom(mfCropBottom);
+
+    if(bMirroredX)
+    {
+        aScale.setX(-aScale.getX());
+    }
+
+    if(bMirroredY)
+    {
+        aScale.setY(-aScale.getY());
+    }
+
+    // create target translate and scale
+    const basegfx::B2DVector aTargetScale(
+        aScale.getX() + fCropRight + fCropLeft,
+        aScale.getY() + fCropBottom + fCropTop);
+    const basegfx::B2DVector aTargetTranslate(
+        aTranslate.getX() - fCropLeft,
+        aTranslate.getY() - fCropTop);
+
+    // create ranges to make comparisons
+    const basegfx::B2DRange aCurrentForCompare(
+        aTranslate.getX(), aTranslate.getY(),
+        aTranslate.getX() + aScale.getX(), aTranslate.getY() + aScale.getY());
+    basegfx::B2DRange aCropped(
+        aTargetTranslate.getX(), aTargetTranslate.getY(),
+        aTargetTranslate.getX() + aTargetScale.getX(), aTargetTranslate.getY() + aTargetScale.getY());
+
+    if(aCropped.isEmpty())
+    {
+        // nothing to return since cropped content is completely empty
+        return;
+    }
+
+    if(aCurrentForCompare.equal(aCropped))
+    {
+        // no crop at all
+        return;
+    }
+
+    // back-transform to have values in unit coordinates
+    basegfx::B2DHomMatrix aBackToUnit;
+    aBackToUnit.translate(-aTranslate.getX(), -aTranslate.getY());
+    aBackToUnit.scale(
+        basegfx::fTools::equalZero(aScale.getX()) ? 1.0 : 1.0 / aScale.getX(),
+        basegfx::fTools::equalZero(aScale.getY()) ? 1.0 : 1.0 / aScale.getY());
+
+    // transform cropped back to unit coordinates
+    aCropped.transform(aBackToUnit);
+
+    // prepare crop PolyPolygon
+    basegfx::B2DPolygon aGraphicOutlinePolygon(
+        basegfx::utils::createPolygonFromRect(
+            aCropped));
+    basegfx::B2DPolyPolygon aCropPolyPolygon(aGraphicOutlinePolygon);
+
+    // current range is unit range
+    basegfx::B2DRange aOverlap(0.0, 0.0, 1.0, 1.0);
+
+    aOverlap.intersect(aCropped);
+
+    if(!aOverlap.isEmpty())
+    {
+        aCropPolyPolygon.append(
+            basegfx::utils::createPolygonFromRect(
+                aOverlap));
+    }
+
+    // transform to object coordinates to prepare for clip
+    aCropPolyPolygon.transform(maObjectTransform);
+    aGraphicOutlinePolygon.transform(maObjectTransform);
+
+    // create cropped transformation
+    basegfx::B2DHomMatrix aCroppedTransform;
+
+    aCroppedTransform.scale(
+        aCropped.getWidth(),
+        aCropped.getHeight());
+    aCroppedTransform.translate(
+        aCropped.getMinX(),
+        aCropped.getMinY());
+    aCroppedTransform = maObjectTransform * aCroppedTransform;
+
+    // prepare graphic primitive (transformed)
+    const drawinglayer::primitive2d::Primitive2DReference aGraphic(
+        new drawinglayer::primitive2d::GraphicPrimitive2D(
+            aCroppedTransform,
+            maGraphic));
+
+    // prepare outline polygon for whole graphic
+    const SvtOptionsDrawinglayer aSvtOptionsDrawinglayer;
+    const basegfx::BColor aHilightColor(aSvtOptionsDrawinglayer.getHilightColor().getBColor());
+    const drawinglayer::primitive2d::Primitive2DReference aGraphicOutline(
+        new drawinglayer::primitive2d::PolygonHairlinePrimitive2D(
+        aGraphicOutlinePolygon,
+        aHilightColor));
+
+    // combine these
+    drawinglayer::primitive2d::Primitive2DContainer aCombination(2);
+    aCombination[0] = aGraphic;
+    aCombination[1] = aGraphicOutline;
+
+    // embed to MaskPrimitive2D
+    const drawinglayer::primitive2d::Primitive2DReference aMaskedGraphic(
+        new drawinglayer::primitive2d::MaskPrimitive2D(
+            aCropPolyPolygon,
+            aCombination));
+
+    // embed to UnifiedTransparencePrimitive2D
+    const drawinglayer::primitive2d::Primitive2DReference aTransparenceMaskedGraphic(
+        new drawinglayer::primitive2d::UnifiedTransparencePrimitive2D(
+            drawinglayer::primitive2d::Primitive2DContainer { aMaskedGraphic },
+            0.8));
+
+    const drawinglayer::primitive2d::Primitive2DContainer aSequence { aTransparenceMaskedGraphic };
+
+    for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+    {
+        // const SdrPageViewWinRec& rPageViewWinRec = rPageViewWinList[b];
+        const SdrPageWindow& rPageWindow = *(pPageView->GetPageWindow(b));
+
+        if(rPageWindow.GetPaintWindow().OutputToWindow())
+        {
+            const rtl::Reference< sdr::overlay::OverlayManager >& xManager = rPageWindow.GetOverlayManager();
+            if(xManager.is())
+            {
+                std::unique_ptr<sdr::overlay::OverlayObject> pNew(new sdr::overlay::OverlayPrimitive2DSequenceObject(aSequence));
+
+                // only informative object, no hit
+                pNew->setHittable(false);
+
+                // OVERLAYMANAGER
+                insertNewlyCreatedOverlayObjectForSdrHdl(
+                    std::move(pNew),
+                    rPageWindow.GetObjectContact(),
+                    *xManager);
+            }
+        }
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdhlpln.cxx b/svx/source/svdraw/svdhlpln.cxx
new file mode 100644
index 000000000..0d515191e
--- /dev/null
+++ b/svx/source/svdraw/svdhlpln.cxx
@@ -0,0 +1,109 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdhlpln.hxx>
+
+#include <vcl/outdev.hxx>
+#include <vcl/ptrstyle.hxx>
+
+
+PointerStyle SdrHelpLine::GetPointer() const
+{
+    switch (eKind) {
+        case SdrHelpLineKind::Vertical  : return PointerStyle::ESize;
+        case SdrHelpLineKind::Horizontal: return PointerStyle::SSize;
+        default                    : return PointerStyle::Move;
+    } // switch
+}
+
+bool SdrHelpLine::IsHit(const Point& rPnt, sal_uInt16 nTolLog, const OutputDevice& rOut) const
+{
+    Size a1Pix(rOut.PixelToLogic(Size(1,1)));
+    bool bXHit=rPnt.X()>=aPos.X()-nTolLog && rPnt.X()<=aPos.X()+nTolLog+a1Pix.Width();
+    bool bYHit=rPnt.Y()>=aPos.Y()-nTolLog && rPnt.Y()<=aPos.Y()+nTolLog+a1Pix.Height();
+    switch (eKind) {
+        case SdrHelpLineKind::Vertical  : return bXHit;
+        case SdrHelpLineKind::Horizontal: return bYHit;
+        case SdrHelpLineKind::Point: {
+            if (bXHit || bYHit) {
+                Size aRad(rOut.PixelToLogic(Size(SDRHELPLINE_POINT_PIXELSIZE,SDRHELPLINE_POINT_PIXELSIZE)));
+                return rPnt.X()>=aPos.X()-aRad.Width() && rPnt.X()<=aPos.X()+aRad.Width()+a1Pix.Width() &&
+                       rPnt.Y()>=aPos.Y()-aRad.Height() && rPnt.Y()<=aPos.Y()+aRad.Height()+a1Pix.Height();
+            }
+        } break;
+    } // switch
+    return false;
+}
+
+tools::Rectangle SdrHelpLine::GetBoundRect(const OutputDevice& rOut) const
+{
+    tools::Rectangle aRet(aPos,aPos);
+    Point aOfs(rOut.GetMapMode().GetOrigin());
+    Size aSiz(rOut.GetOutputSize());
+    switch (eKind) {
+        case SdrHelpLineKind::Vertical  : aRet.SetTop(-aOfs.Y() ); aRet.SetBottom(-aOfs.Y()+aSiz.Height() ); break;
+        case SdrHelpLineKind::Horizontal: aRet.SetLeft(-aOfs.X() ); aRet.SetRight(-aOfs.X()+aSiz.Width() );  break;
+        case SdrHelpLineKind::Point     : {
+            Size aRad(rOut.PixelToLogic(Size(SDRHELPLINE_POINT_PIXELSIZE,SDRHELPLINE_POINT_PIXELSIZE)));
+            aRet.AdjustLeft( -(aRad.Width()) );
+            aRet.AdjustRight(aRad.Width() );
+            aRet.AdjustTop( -(aRad.Height()) );
+            aRet.AdjustBottom(aRad.Height() );
+        } break;
+    } // switch
+    return aRet;
+}
+
+SdrHelpLineList& SdrHelpLineList::operator=(const SdrHelpLineList& rSrcList)
+{
+    aList.clear();
+    sal_uInt16 nCount=rSrcList.GetCount();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        Insert(rSrcList[i]);
+    }
+    return *this;
+}
+
+bool SdrHelpLineList::operator==(const SdrHelpLineList& rSrcList) const
+{
+    bool bEqual = false;
+    sal_uInt16 nCount=GetCount();
+    if (nCount==rSrcList.GetCount()) {
+        bEqual = true;
+        for (sal_uInt16 i=0; i<nCount && bEqual; i++) {
+            if (*aList[i]!=*rSrcList.aList[i]) {
+                bEqual = false;
+            }
+        }
+    }
+    return bEqual;
+}
+
+sal_uInt16 SdrHelpLineList::HitTest(const Point& rPnt, sal_uInt16 nTolLog, const OutputDevice& rOut) const
+{
+    sal_uInt16 nCount=GetCount();
+    for (sal_uInt16 i=nCount; i>0;) {
+        i--;
+        if (aList[i]->IsHit(rPnt,nTolLog,rOut)) return i;
+    }
+    return SDRHELPLINE_NOTFOUND;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svditer.cxx b/svx/source/svdraw/svditer.cxx
new file mode 100644
index 000000000..629438ac9
--- /dev/null
+++ b/svx/source/svdraw/svditer.cxx
@@ -0,0 +1,143 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svditer.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdmark.hxx>
+
+SdrObjListIter::SdrObjListIter(const SdrObjList* pObjList, SdrIterMode eMode, bool bReverse)
+:   maObjList(),
+    mnIndex(0),
+    mbReverse(bReverse),
+    mbUseZOrder(true)
+{
+    if(nullptr != pObjList)
+    {
+        ImpProcessObjectList(*pObjList, eMode);
+    }
+
+    Reset();
+}
+
+SdrObjListIter::SdrObjListIter(const SdrObjList* pObjList, bool bUseZOrder, SdrIterMode eMode, bool bReverse)
+:   maObjList(),
+    mnIndex(0),
+    mbReverse(bReverse),
+    mbUseZOrder(bUseZOrder)
+{
+    if(nullptr != pObjList)
+    {
+        // correct when we have no ObjectNavigationOrder
+        if(!mbUseZOrder && !pObjList->HasObjectNavigationOrder())
+        {
+            mbUseZOrder = false;
+        }
+
+        ImpProcessObjectList(*pObjList, eMode);
+    }
+
+    Reset();
+}
+
+SdrObjListIter::SdrObjListIter(const SdrObject& rSdrObject, SdrIterMode eMode, bool bReverse)
+:   maObjList(),
+    mnIndex(0),
+    mbReverse(bReverse),
+    mbUseZOrder(true)
+{
+    ImpProcessObj(rSdrObject, eMode);
+    Reset();
+}
+
+SdrObjListIter::SdrObjListIter(const SdrPage* pSdrPage, SdrIterMode eMode, bool bReverse)
+:   maObjList(),
+    mnIndex(0),
+    mbReverse(bReverse),
+    mbUseZOrder(true)
+{
+    if (const SdrObjList* pList = dynamic_cast<const SdrObjList*>(pSdrPage))
+        ImpProcessObjectList(*pList, eMode);
+    Reset();
+}
+
+SdrObjListIter::SdrObjListIter( const SdrMarkList& rMarkList, SdrIterMode eMode )
+:   maObjList(),
+    mnIndex(0),
+    mbReverse(false),
+    mbUseZOrder(true)
+{
+    ImpProcessMarkList(rMarkList, eMode);
+    Reset();
+}
+
+void SdrObjListIter::ImpProcessObjectList(const SdrObjList& rObjList, SdrIterMode eMode)
+{    for(size_t nIdx(0), nCount(rObjList.GetObjCount()); nIdx < nCount; ++nIdx)
+    {
+        const SdrObject* pSdrObject(mbUseZOrder
+            ? rObjList.GetObj(nIdx)
+            : rObjList.GetObjectForNavigationPosition(nIdx));
+
+        if(nullptr == pSdrObject)
+        {
+            OSL_ENSURE(false, "SdrObjListIter: corrupted SdrObjList (!)");
+        }
+        else
+        {
+            ImpProcessObj(*pSdrObject, eMode);
+        }
+    }
+}
+
+void SdrObjListIter::ImpProcessMarkList(const SdrMarkList& rMarkList, SdrIterMode eMode)
+{
+    for( size_t nIdx = 0, nCount = rMarkList.GetMarkCount(); nIdx < nCount; ++nIdx )
+    {
+        if( SdrObject* pObj = rMarkList.GetMark( nIdx )->GetMarkedSdrObj() )
+        {
+            ImpProcessObj(*pObj, eMode);
+        }
+    }
+}
+
+void SdrObjListIter::ImpProcessObj(const SdrObject& rSdrObject, SdrIterMode eMode)
+{
+    // TTTT: Note: The behaviour has changed here, it will now deep-iterate
+    // for SdrObjGroup and E3dScene. Old version only deep-dived for SdrObjGroup,
+    // E3dScene was just added flat. This is now more correct, but potentially
+    // there will exist code in the 3D area that *self-iterates* with local
+    // functions/methods due to this iterator was not doing the expected thing.
+    // These will be difficult to find, but in most cases should do no harm,
+    // but cost runtime. Will need to have an eye on this aspect on continued
+    // changes...
+    const SdrObjList* pChildren(rSdrObject.getChildrenOfSdrObject());
+    const bool bIsGroup(nullptr != pChildren);
+
+    if(!bIsGroup || (SdrIterMode::DeepNoGroups != eMode))
+    {
+        maObjList.push_back(&rSdrObject);
+    }
+
+    if(bIsGroup && (SdrIterMode::Flat != eMode))
+    {
+        ImpProcessObjectList(*pChildren, eMode);
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdlayer.cxx b/svx/source/svdraw/svdlayer.cxx
new file mode 100644
index 000000000..d70b221ba
--- /dev/null
+++ b/svx/source/svdraw/svdlayer.cxx
@@ -0,0 +1,361 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <com/sun/star/uno/Sequence.hxx>
+
+#include <svx/svdlayer.hxx>
+#include <svx/svdmodel.hxx>
+
+bool SdrLayerIDSet::IsEmpty() const
+{
+    for(sal_uInt8 i : aData)
+    {
+        if(i != 0)
+            return false;
+    }
+
+    return true;
+}
+
+void SdrLayerIDSet::operator&=(const SdrLayerIDSet& r2ndSet)
+{
+    for(sal_uInt16 i(0); i < 32; i++)
+    {
+        aData[i] &= r2ndSet.aData[i];
+    }
+}
+
+/** initialize this set with a UNO sequence of sal_Int8 (e.g. as stored in settings.xml)
+*/
+void SdrLayerIDSet::PutValue( const css::uno::Any & rAny )
+{
+    css::uno::Sequence< sal_Int8 > aSeq;
+    if( rAny >>= aSeq )
+    {
+        sal_Int16 nCount = static_cast<sal_Int16>(aSeq.getLength());
+        if( nCount > 32 )
+            nCount = 32;
+
+        sal_Int16 nIndex;
+        for( nIndex = 0; nIndex < nCount; nIndex++ )
+        {
+            aData[nIndex] = static_cast<sal_uInt8>(aSeq[nIndex]);
+        }
+
+        for( ; nIndex < 32; nIndex++ )
+        {
+            aData[nIndex] = 0;
+        }
+    }
+}
+
+SdrLayer::SdrLayer(SdrLayerID nNewID, const OUString& rNewName) :
+    maName(rNewName), pModel(nullptr), nID(nNewID)
+{
+    // ODF default values
+    mbVisibleODF = true;
+    mbPrintableODF = true;
+    mbLockedODF = false;
+}
+
+void SdrLayer::SetName(const OUString& rNewName)
+{
+    if (rNewName == maName)
+        return;
+
+    maName = rNewName;
+
+    if (pModel)
+    {
+        SdrHint aHint(SdrHintKind::LayerChange);
+        pModel->Broadcast(aHint);
+        pModel->SetChanged();
+    }
+}
+
+bool SdrLayer::operator==(const SdrLayer& rCmpLayer) const
+{
+    return (nID == rCmpLayer.nID
+        && maName == rCmpLayer.maName);
+}
+
+SdrLayerAdmin::SdrLayerAdmin(SdrLayerAdmin* pNewParent):
+    pParent(pNewParent),
+    pModel(nullptr),
+    maControlLayerName("controls")
+{
+}
+
+SdrLayerAdmin::SdrLayerAdmin(const SdrLayerAdmin& rSrcLayerAdmin):
+    pParent(nullptr),
+    pModel(nullptr),
+    maControlLayerName("controls")
+{
+    *this = rSrcLayerAdmin;
+}
+
+SdrLayerAdmin::~SdrLayerAdmin()
+{
+}
+
+void SdrLayerAdmin::ClearLayers()
+{
+    maLayers.clear();
+}
+
+SdrLayerAdmin& SdrLayerAdmin::operator=(const SdrLayerAdmin& rSrcLayerAdmin)
+{
+    if (this != &rSrcLayerAdmin)
+    {
+        maLayers.clear();
+        pParent=rSrcLayerAdmin.pParent;
+        sal_uInt16 i;
+        sal_uInt16 nCount=rSrcLayerAdmin.GetLayerCount();
+        for (i=0; i<nCount; i++) {
+            maLayers.emplace_back(new SdrLayer(*rSrcLayerAdmin.GetLayer(i)));
+        }
+    }
+    return *this;
+}
+
+void SdrLayerAdmin::SetModel(SdrModel* pNewModelel)
+{
+    if (pNewModelel!=pModel) {
+        pModel=pNewModelel;
+        sal_uInt16 nCount=GetLayerCount();
+        sal_uInt16 i;
+        for (i=0; i<nCount; i++) {
+            GetLayer(i)->SetModel(pNewModelel);
+        }
+    }
+}
+
+void SdrLayerAdmin::Broadcast() const
+{
+    if (pModel!=nullptr) {
+        SdrHint aHint(SdrHintKind::LayerOrderChange);
+        pModel->Broadcast(aHint);
+        pModel->SetChanged();
+    }
+}
+
+void SdrLayerAdmin::InsertLayer(std::unique_ptr<SdrLayer> pLayer, sal_uInt16 nPos)
+{
+        pLayer->SetModel(pModel);
+        if(nPos==0xFFFF)
+            maLayers.push_back(std::move(pLayer));
+        else
+            maLayers.insert(maLayers.begin() + nPos, std::move(pLayer));
+        Broadcast();
+}
+
+std::unique_ptr<SdrLayer> SdrLayerAdmin::RemoveLayer(sal_uInt16 nPos)
+{
+    std::unique_ptr<SdrLayer> pRetLayer = std::move(maLayers[nPos]);
+    maLayers.erase(maLayers.begin()+nPos);
+    Broadcast();
+    return pRetLayer;
+}
+
+SdrLayer* SdrLayerAdmin::NewLayer(const OUString& rName, sal_uInt16 nPos)
+{
+    SdrLayerID nID=GetUniqueLayerID();
+    SdrLayer* pLay=new SdrLayer(nID,rName);
+    pLay->SetModel(pModel);
+    if(nPos==0xFFFF)
+        maLayers.push_back(std::unique_ptr<SdrLayer>(pLay));
+    else
+        maLayers.insert(maLayers.begin() + nPos, std::unique_ptr<SdrLayer>(pLay));
+    Broadcast();
+    return pLay;
+}
+
+sal_uInt16 SdrLayerAdmin::GetLayerPos(const SdrLayer* pLayer) const
+{
+    sal_uInt16 nRet=SDRLAYERPOS_NOTFOUND;
+    if (pLayer!=nullptr) {
+        auto it = std::find_if(maLayers.begin(), maLayers.end(),
+                    [&](const std::unique_ptr<SdrLayer> & p) { return p.get() == pLayer; });
+        if (it!=maLayers.end()) {
+            nRet=it - maLayers.begin();
+        }
+    }
+    return nRet;
+}
+
+SdrLayer* SdrLayerAdmin::GetLayer(const OUString& rName)
+{
+    return const_cast<SdrLayer*>(const_cast<const SdrLayerAdmin*>(this)->GetLayer(rName));
+}
+
+const SdrLayer* SdrLayerAdmin::GetLayer(const OUString& rName) const
+{
+    sal_uInt16 i(0);
+    const SdrLayer* pLay = nullptr;
+
+    while(i < GetLayerCount() && !pLay)
+    {
+        if (rName == GetLayer(i)->GetName())
+            pLay = GetLayer(i);
+        else
+            i++;
+    }
+
+    if(!pLay && pParent)
+    {
+        pLay = pParent->GetLayer(rName);
+    }
+
+    return pLay;
+}
+
+SdrLayerID SdrLayerAdmin::GetLayerID(const OUString& rName) const
+{
+    SdrLayerID nRet=SDRLAYER_NOTFOUND;
+    const SdrLayer* pLay=GetLayer(rName);
+    if (pLay!=nullptr) nRet=pLay->GetID();
+    return nRet;
+}
+
+const SdrLayer* SdrLayerAdmin::GetLayerPerID(SdrLayerID nID) const
+{
+    for (auto const & pLayer : maLayers)
+        if (pLayer->GetID() == nID)
+            return pLayer.get();
+    return nullptr;
+}
+
+// Global LayerIDs begin at 0 and increase,
+// local LayerIDs begin at 254 and decrease;
+// 255 is reserved for SDRLAYER_NOTFOUND.
+
+SdrLayerID SdrLayerAdmin::GetUniqueLayerID() const
+{
+    SdrLayerIDSet aSet;
+    for (sal_uInt16 j=0; j<GetLayerCount(); j++)
+    {
+        aSet.Set(GetLayer(j)->GetID());
+    }
+    sal_uInt8 i;
+    if (pParent != nullptr)
+    {
+        i = 254;
+        while (i && aSet.IsSet(SdrLayerID(i)))
+            --i;
+        assert(i != 0);
+        if (i == 0)
+            i = 254;
+    }
+    else
+    {
+        i = 0;
+        while (i<=254 && aSet.IsSet(SdrLayerID(i)))
+            i++;
+        assert(i <= 254);
+        if (i>254)
+            i = 0;
+    }
+    return SdrLayerID(i);
+}
+
+void SdrLayerAdmin::SetControlLayerName(const OUString& rNewName)
+{
+    maControlLayerName = rNewName;
+}
+
+void  SdrLayerAdmin::getVisibleLayersODF( SdrLayerIDSet& rOutSet) const
+{
+    rOutSet.ClearAll();
+    for( auto & pCurrentLayer : maLayers )
+    {
+        if ( pCurrentLayer->IsVisibleODF() )
+            rOutSet.Set( pCurrentLayer->GetID() );
+    }
+}
+
+void SdrLayerAdmin::getPrintableLayersODF( SdrLayerIDSet& rOutSet) const
+{
+    rOutSet.ClearAll();
+    for( auto & pCurrentLayer : maLayers )
+    {
+        if ( pCurrentLayer->IsPrintableODF() )
+            rOutSet.Set( pCurrentLayer->GetID() );
+    }
+}
+
+void SdrLayerAdmin::getLockedLayersODF( SdrLayerIDSet& rOutSet) const
+{
+    rOutSet.ClearAll();
+    for( auto& pCurrentLayer : maLayers )
+    {
+        if ( pCurrentLayer->IsLockedODF() )
+            rOutSet.Set( pCurrentLayer->GetID() );
+    }
+}
+
+    // Generates a bitfield for settings.xml from the SdrLayerIDSet.
+    // Output is a UNO sequence of BYTE (which is 'short' in API).
+void SdrLayerAdmin::QueryValue(const SdrLayerIDSet& rViewLayerSet, css::uno::Any& rAny)
+{
+    // tdf#119392 The SdrLayerIDSet in a view is ordered according LayerID, but in file
+    // the bitfield is interpreted in order of layers in <draw:layer-set>.
+    // First generate a new bitfield based on rViewLayerSet in the needed order.
+    sal_uInt8 aTmp[32]; // 256 bits in settings.xml makes byte 0 to 31
+    for (auto nIndex = 0; nIndex <32; nIndex++)
+    {
+        aTmp[nIndex] = 0;
+    }
+    sal_uInt8 nByteIndex = 0;
+    sal_uInt8 nBitpos = 0;
+    sal_uInt16 nLayerPos = 0; // Position of the layer in member aLayer and in <draw:layer-set> in file
+    sal_uInt16 nLayerIndex = 0;
+    for( const auto& pCurrentLayer : maLayers )
+    {
+        SdrLayerID nCurrentID = pCurrentLayer->GetID();
+        if ( rViewLayerSet.IsSet(nCurrentID) )
+        {
+            nLayerPos = nLayerIndex;
+            nByteIndex = nLayerPos / 8;
+            if (nByteIndex > 31)
+                continue; // skip position, if too large for bitfield
+            nBitpos = nLayerPos % 8;
+            aTmp[nByteIndex] |= (1 << nBitpos);
+        }
+        ++nLayerIndex;
+    }
+
+    // Second transform the bitfield to byte sequence, same as in previous version of QueryValue
+    sal_uInt8 nNumBytesSet = 0;
+    for( auto nIndex = 31; nIndex >= 0; nIndex--)
+    {
+        if( 0 != aTmp[nIndex] )
+        {
+            nNumBytesSet = nIndex + 1;
+            break;
+        }
+    }
+    css::uno::Sequence< sal_Int8 > aSeq( nNumBytesSet );
+    for( auto nIndex = 0; nIndex < nNumBytesSet; nIndex++ )
+    {
+        aSeq[nIndex] = static_cast<sal_Int8>(aTmp[nIndex]);
+    }
+    rAny <<= aSeq;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdmark.cxx b/svx/source/svdraw/svdmark.cxx
new file mode 100644
index 000000000..3b5988974
--- /dev/null
+++ b/svx/source/svdraw/svdmark.cxx
@@ -0,0 +1,790 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <osl/time.h>
+#include <svx/svdmark.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+
+
+#include <svx/obj3d.hxx>
+#include <svx/scene3d.hxx>
+#include <svl/SfxBroadcaster.hxx>
+#include <svx/svdoedge.hxx>
+
+#include <cassert>
+
+void SdrMark::setTime()
+{
+    TimeValue aNow;
+    osl_getSystemTime(&aNow);
+    mnTimeStamp = sal_Int64(aNow.Seconds) * 1000000000 + aNow.Nanosec;
+}
+
+SdrMark::SdrMark(SdrObject* pNewObj, SdrPageView* pNewPageView)
+:   mpSelectedSdrObject(pNewObj),
+    mpPageView(pNewPageView),
+    mbCon1(false),
+    mbCon2(false),
+    mnUser(0)
+{
+    if(mpSelectedSdrObject)
+    {
+        mpSelectedSdrObject->AddObjectUser( *this );
+    }
+    setTime();
+}
+
+SdrMark::SdrMark(const SdrMark& rMark)
+:   ObjectUser(),
+    mnTimeStamp(0),
+    mpSelectedSdrObject(nullptr),
+    mpPageView(nullptr),
+    mbCon1(false),
+    mbCon2(false),
+    mnUser(0)
+{
+    *this = rMark;
+}
+
+SdrMark::~SdrMark()
+{
+    if (mpSelectedSdrObject)
+    {
+        mpSelectedSdrObject->RemoveObjectUser( *this );
+    }
+}
+
+void SdrMark::ObjectInDestruction(const SdrObject& rObject)
+{
+    (void) rObject; // avoid warnings
+    OSL_ENSURE(mpSelectedSdrObject && mpSelectedSdrObject == &rObject, "SdrMark::ObjectInDestruction: called from object different from hosted one (!)");
+    OSL_ENSURE(mpSelectedSdrObject, "SdrMark::ObjectInDestruction: still selected SdrObject is deleted, deselect first (!)");
+    mpSelectedSdrObject = nullptr;
+}
+
+void SdrMark::SetMarkedSdrObj(SdrObject* pNewObj)
+{
+    if(mpSelectedSdrObject)
+    {
+        mpSelectedSdrObject->RemoveObjectUser( *this );
+    }
+
+    mpSelectedSdrObject = pNewObj;
+
+    if(mpSelectedSdrObject)
+    {
+        mpSelectedSdrObject->AddObjectUser( *this );
+    }
+}
+
+SdrMark& SdrMark::operator=(const SdrMark& rMark)
+{
+    SetMarkedSdrObj(rMark.mpSelectedSdrObject);
+
+    mnTimeStamp = rMark.mnTimeStamp;
+    mpPageView = rMark.mpPageView;
+    mbCon1 = rMark.mbCon1;
+    mbCon2 = rMark.mbCon2;
+    mnUser = rMark.mnUser;
+    maPoints = rMark.maPoints;
+    maGluePoints = rMark.maGluePoints;
+
+    return *this;
+}
+
+static bool ImpSdrMarkListSorter(std::unique_ptr<SdrMark> const& lhs, std::unique_ptr<SdrMark> const& rhs)
+{
+    SdrObject* pObj1 = lhs->GetMarkedSdrObj();
+    SdrObject* pObj2 = rhs->GetMarkedSdrObj();
+    SdrObjList* pOL1 = pObj1 ? pObj1->getParentSdrObjListFromSdrObject() : nullptr;
+    SdrObjList* pOL2 = pObj2 ? pObj2->getParentSdrObjListFromSdrObject() : nullptr;
+
+    if (pOL1 == pOL2)
+    {
+        // AF: Note that I reverted a change from sal_uInt32 to sal_uLong (made
+        // for 64bit compliance, #i78198#) because internally in SdrObject
+        // both nOrdNum and mnNavigationPosition are stored as sal_uInt32.
+        sal_uInt32 nObjOrd1(pObj1 ? pObj1->GetNavigationPosition() : 0);
+        sal_uInt32 nObjOrd2(pObj2 ? pObj2->GetNavigationPosition() : 0);
+
+        return nObjOrd1 < nObjOrd2;
+    }
+    else
+    {
+        return pOL1 < pOL2;
+    }
+}
+
+
+void SdrMarkList::ForceSort() const
+{
+    if(!mbSorted)
+    {
+        const_cast<SdrMarkList*>(this)->ImpForceSort();
+    }
+}
+
+void SdrMarkList::ImpForceSort()
+{
+    if(!mbSorted)
+    {
+        mbSorted = true;
+        size_t nCount = maList.size();
+
+        // remove invalid
+        if(nCount > 0 )
+        {
+            maList.erase(std::remove_if(maList.begin(), maList.end(),
+                [](std::unique_ptr<SdrMark>& rItem) { return rItem->GetMarkedSdrObj() == nullptr; }),
+                maList.end());
+            nCount = maList.size();
+        }
+
+        if(nCount > 1)
+        {
+            std::sort(maList.begin(), maList.end(), ImpSdrMarkListSorter);
+
+            // remove duplicates
+            if(maList.size() > 1)
+            {
+                SdrMark* pCurrent = maList.back().get();
+                for (size_t count = maList.size() - 1; count; --count)
+                {
+                    size_t i = count - 1;
+                    SdrMark* pCmp = maList[i].get();
+                    assert(pCurrent->GetMarkedSdrObj());
+                    if(pCurrent->GetMarkedSdrObj() == pCmp->GetMarkedSdrObj())
+                    {
+                        // Con1/Con2 Merging
+                        if(pCmp->IsCon1())
+                            pCurrent->SetCon1(true);
+
+                        if(pCmp->IsCon2())
+                            pCurrent->SetCon2(true);
+
+                        // delete pCmp
+                        maList.erase(maList.begin() + i);
+                    }
+                    else
+                    {
+                        pCurrent = pCmp;
+                    }
+                }
+            }
+        }
+    }
+}
+
+void SdrMarkList::Clear()
+{
+    maList.clear();
+    mbSorted = true; //we're empty, so can be considered sorted
+    SetNameDirty();
+}
+
+SdrMarkList& SdrMarkList::operator=(const SdrMarkList& rLst)
+{
+    if (this != &rLst)
+    {
+        Clear();
+
+        for(size_t i = 0; i < rLst.GetMarkCount(); ++i)
+        {
+            SdrMark* pMark = rLst.GetMark(i);
+            maList.emplace_back(new SdrMark(*pMark));
+        }
+
+        maMarkName = rLst.maMarkName;
+        mbNameOk = rLst.mbNameOk;
+        maPointName = rLst.maPointName;
+        mbPointNameOk = rLst.mbPointNameOk;
+        maGluePointName = rLst.maGluePointName;
+        mbSorted = rLst.mbSorted;
+    }
+    return *this;
+}
+
+SdrMark* SdrMarkList::GetMark(size_t nNum) const
+{
+    return (nNum < maList.size()) ? maList[nNum].get() : nullptr;
+}
+
+size_t SdrMarkList::FindObject(const SdrObject* pObj) const
+{
+    // Since relying on OrdNums is not allowed for the selection because objects in the
+    // selection may not be inserted in a list if they are e.g. modified ATM, i changed
+    // this loop to just look if the object pointer is in the selection.
+
+    // Problem is that GetOrdNum() which is const, internally casts to non-const and
+    // hardly sets the OrdNum member of the object (nOrdNum) to 0 (ZERO) if the object
+    // is not inserted in an object list.
+    // Since this may be by purpose and necessary somewhere else i decided that it is
+    // less dangerous to change this method then changing SdrObject::GetOrdNum().
+    if(pObj)
+    {
+        for(size_t a = 0; a < maList.size(); ++a)
+        {
+            if(maList[a]->GetMarkedSdrObj() == pObj)
+            {
+                return a;
+            }
+        }
+    }
+
+    return SAL_MAX_SIZE;
+}
+
+void SdrMarkList::InsertEntry(const SdrMark& rMark, bool bChkSort)
+{
+    SetNameDirty();
+    const size_t nCount(maList.size());
+
+    if(!bChkSort || !mbSorted || nCount == 0)
+    {
+        if(!bChkSort)
+            mbSorted = false;
+
+        maList.emplace_back(new SdrMark(rMark));
+    }
+    else
+    {
+        SdrMark* pLast = GetMark(nCount - 1);
+        const SdrObject* pLastObj = pLast->GetMarkedSdrObj();
+        const SdrObject* pNewObj = rMark.GetMarkedSdrObj();
+
+        if(pLastObj == pNewObj)
+        {
+            // This one already exists.
+            // Con1/Con2 Merging
+            if(rMark.IsCon1())
+                pLast->SetCon1(true);
+
+            if(rMark.IsCon2())
+                pLast->SetCon2(true);
+        }
+        else
+        {
+            maList.emplace_back(new SdrMark(rMark));
+
+            // now check if the sort is ok
+            const SdrObjList* pLastOL = pLastObj!=nullptr ? pLastObj->getParentSdrObjListFromSdrObject() : nullptr;
+            const SdrObjList* pNewOL = pNewObj !=nullptr ? pNewObj->getParentSdrObjListFromSdrObject() : nullptr;
+
+            if(pLastOL == pNewOL)
+            {
+                const sal_uLong nLastNum(pLastObj!=nullptr ? pLastObj->GetOrdNum() : 0);
+                const sal_uLong nNewNum(pNewObj !=nullptr ? pNewObj ->GetOrdNum() : 0);
+
+                if(nNewNum < nLastNum)
+                {
+                    // at some point, we have to sort
+                    mbSorted = false;
+                }
+            }
+            else
+            {
+                // at some point, we have to sort
+                mbSorted = false;
+            }
+        }
+    }
+}
+
+void SdrMarkList::DeleteMark(size_t nNum)
+{
+    SdrMark* pMark = GetMark(nNum);
+    DBG_ASSERT(pMark!=nullptr,"DeleteMark: MarkEntry not found.");
+
+    if(pMark)
+    {
+        maList.erase(maList.begin() + nNum);
+        if (maList.empty())
+            mbSorted = true; //we're empty, so can be considered sorted
+        SetNameDirty();
+    }
+}
+
+void SdrMarkList::ReplaceMark(const SdrMark& rNewMark, size_t nNum)
+{
+    SdrMark* pMark = GetMark(nNum);
+    DBG_ASSERT(pMark!=nullptr,"ReplaceMark: MarkEntry not found.");
+
+    if(pMark)
+    {
+        SetNameDirty();
+        maList[nNum].reset(new SdrMark(rNewMark));
+        mbSorted = false;
+    }
+}
+
+void SdrMarkList::Merge(const SdrMarkList& rSrcList, bool bReverse)
+{
+    const size_t nCount(rSrcList.maList.size());
+
+    if(rSrcList.mbSorted)
+    {
+        // merge without forcing a Sort in rSrcList
+        bReverse = false;
+    }
+
+    if(!bReverse)
+    {
+        for(size_t i = 0; i < nCount; ++i)
+        {
+            SdrMark* pM = rSrcList.maList[i].get();
+            InsertEntry(*pM);
+        }
+    }
+    else
+    {
+        for(size_t i = nCount; i > 0;)
+        {
+            --i;
+            SdrMark* pM = rSrcList.maList[i].get();
+            InsertEntry(*pM);
+        }
+    }
+}
+
+bool SdrMarkList::DeletePageView(const SdrPageView& rPV)
+{
+    bool bChgd(false);
+
+    for(auto it = maList.begin(); it != maList.end(); )
+    {
+        SdrMark* pMark = it->get();
+
+        if(pMark->GetPageView()==&rPV)
+        {
+            it = maList.erase(it);
+            SetNameDirty();
+            bChgd = true;
+        }
+        else
+            ++it;
+    }
+
+    return bChgd;
+}
+
+bool SdrMarkList::InsertPageView(const SdrPageView& rPV)
+{
+    bool bChgd(false);
+    DeletePageView(rPV); // delete all of them, then append the entire page
+    const SdrObjList* pOL = rPV.GetObjList();
+    const size_t nObjCount(pOL->GetObjCount());
+
+    for(size_t nO = 0; nO < nObjCount; ++nO)
+    {
+        SdrObject* pObj = pOL->GetObj(nO);
+        bool bDoIt(rPV.IsObjMarkable(pObj));
+
+        if(bDoIt)
+        {
+            maList.emplace_back(new SdrMark(pObj, const_cast<SdrPageView*>(&rPV)));
+            SetNameDirty();
+            bChgd = true;
+        }
+    }
+
+    return bChgd;
+}
+
+const OUString& SdrMarkList::GetMarkDescription() const
+{
+    const size_t nCount(GetMarkCount());
+
+    if(mbNameOk && 1 == nCount)
+    {
+        // if it's a single selection, cache only text frame
+        const SdrObject* pObj = GetMark(0)->GetMarkedSdrObj();
+        const SdrTextObj* pTextObj = dynamic_cast<const SdrTextObj*>( pObj );
+
+        if(!pTextObj || !pTextObj->IsTextFrame())
+        {
+            const_cast<SdrMarkList*>(this)->mbNameOk = false;
+        }
+    }
+
+    if(!mbNameOk)
+    {
+        SdrMark* pMark = GetMark(0);
+        OUString aNam;
+
+        if(!nCount)
+        {
+            const_cast<SdrMarkList*>(this)->maMarkName = SvxResId(STR_ObjNameNoObj);
+        }
+        else if(1 == nCount)
+        {
+            if(pMark->GetMarkedSdrObj())
+            {
+                aNam = pMark->GetMarkedSdrObj()->TakeObjNameSingul();
+            }
+        }
+        else
+        {
+            if(pMark->GetMarkedSdrObj())
+            {
+                aNam = pMark->GetMarkedSdrObj()->TakeObjNamePlural();
+                bool bEq(true);
+
+                for(size_t i = 1; i < GetMarkCount() && bEq; ++i)
+                {
+                    SdrMark* pMark2 = GetMark(i);
+                    OUString aStr1(pMark2->GetMarkedSdrObj()->TakeObjNamePlural());
+                    bEq = aNam == aStr1;
+                }
+
+                if(!bEq)
+                {
+                    aNam = SvxResId(STR_ObjNamePlural);
+                }
+            }
+
+            aNam = OUString::number( nCount ) + " " + aNam;
+        }
+
+        const_cast<SdrMarkList*>(this)->maMarkName = aNam;
+        const_cast<SdrMarkList*>(this)->mbNameOk = true;
+    }
+
+    return maMarkName;
+}
+
+const OUString& SdrMarkList::GetPointMarkDescription(bool bGlue) const
+{
+    bool& rNameOk = const_cast<bool&>(bGlue ? mbGluePointNameOk : mbPointNameOk);
+    OUString& rName = const_cast<OUString&>(bGlue ? maGluePointName : maPointName);
+    const size_t nMarkCount(GetMarkCount());
+    size_t nMarkPtCnt(0);
+    size_t nMarkPtObjCnt(0);
+    size_t n1stMarkNum(SAL_MAX_SIZE);
+
+    for(size_t nMarkNum = 0; nMarkNum < nMarkCount; ++nMarkNum)
+    {
+        const SdrMark* pMark = GetMark(nMarkNum);
+        const SdrUShortCont& rPts = bGlue ? pMark->GetMarkedGluePoints() : pMark->GetMarkedPoints();
+
+        if (!rPts.empty())
+        {
+            if(n1stMarkNum == SAL_MAX_SIZE)
+            {
+                n1stMarkNum = nMarkNum;
+            }
+
+            nMarkPtCnt += rPts.size();
+            nMarkPtObjCnt++;
+        }
+
+        if(nMarkPtObjCnt > 1 && rNameOk)
+        {
+            // preliminary decision
+            return rName;
+        }
+    }
+
+    if(rNameOk && 1 == nMarkPtObjCnt)
+    {
+        // if it's a single selection, cache only text frame
+        const SdrObject* pObj = GetMark(0)->GetMarkedSdrObj();
+        const SdrTextObj* pTextObj = dynamic_cast<const SdrTextObj*>( pObj );
+
+        if(!pTextObj || !pTextObj->IsTextFrame())
+        {
+            rNameOk = false;
+        }
+    }
+
+    if(!nMarkPtObjCnt)
+    {
+        rName.clear();
+        rNameOk = true;
+    }
+    else if(!rNameOk)
+    {
+        const SdrMark* pMark = GetMark(n1stMarkNum);
+        OUString aNam;
+
+        if(1 == nMarkPtObjCnt)
+        {
+            if(pMark->GetMarkedSdrObj())
+            {
+                aNam = pMark->GetMarkedSdrObj()->TakeObjNameSingul();
+            }
+        }
+        else
+        {
+            if(pMark->GetMarkedSdrObj())
+            {
+                aNam = pMark->GetMarkedSdrObj()->TakeObjNamePlural();
+            }
+
+            bool bEq(true);
+
+            for(size_t i = n1stMarkNum + 1; i < GetMarkCount() && bEq; ++i)
+            {
+                const SdrMark* pMark2 = GetMark(i);
+                const SdrUShortCont& rPts = bGlue ? pMark2->GetMarkedGluePoints() : pMark2->GetMarkedPoints();
+
+                if (!rPts.empty() && pMark2->GetMarkedSdrObj())
+                {
+                    OUString aStr1(pMark2->GetMarkedSdrObj()->TakeObjNamePlural());
+                    bEq = aNam == aStr1;
+                }
+            }
+
+            if(!bEq)
+            {
+                aNam = SvxResId(STR_ObjNamePlural);
+            }
+
+            aNam = OUString::number( nMarkPtObjCnt ) + " " + aNam;
+        }
+
+        OUString aStr1;
+
+        if(1 == nMarkPtCnt)
+        {
+            aStr1 = SvxResId(bGlue ? STR_ViewMarkedGluePoint : STR_ViewMarkedPoint);
+        }
+        else
+        {
+            aStr1 = SvxResId(bGlue ? STR_ViewMarkedGluePoints : STR_ViewMarkedPoints);
+            aStr1 = aStr1.replaceFirst("%2", OUString::number( nMarkPtCnt ));
+        }
+
+        aStr1 = aStr1.replaceFirst("%1", aNam);
+        rName = aStr1;
+        rNameOk = true;
+    }
+
+    return rName;
+}
+
+bool SdrMarkList::TakeBoundRect(SdrPageView const * pPV, tools::Rectangle& rRect) const
+{
+    bool bFnd(false);
+    tools::Rectangle aR;
+
+    for(size_t i = 0; i < GetMarkCount(); ++i)
+    {
+        SdrMark* pMark = GetMark(i);
+
+        if(!pPV || pMark->GetPageView() == pPV)
+        {
+            if(pMark->GetMarkedSdrObj())
+            {
+                aR = pMark->GetMarkedSdrObj()->GetCurrentBoundRect();
+
+                if(bFnd)
+                {
+                    rRect.Union(aR);
+                }
+                else
+                {
+                    rRect = aR;
+                    bFnd = true;
+                }
+            }
+        }
+    }
+
+    return bFnd;
+}
+
+bool SdrMarkList::TakeSnapRect(SdrPageView const * pPV, tools::Rectangle& rRect) const
+{
+    bool bFnd(false);
+
+    for(size_t i = 0; i < GetMarkCount(); ++i)
+    {
+        SdrMark* pMark = GetMark(i);
+
+        if(!pPV || pMark->GetPageView() == pPV)
+        {
+            if(pMark->GetMarkedSdrObj())
+            {
+                tools::Rectangle aR(pMark->GetMarkedSdrObj()->GetSnapRect());
+
+                if(bFnd)
+                {
+                    rRect.Union(aR);
+                }
+                else
+                {
+                    rRect = aR;
+                    bFnd = true;
+                }
+            }
+        }
+    }
+
+    return bFnd;
+}
+
+
+namespace sdr
+{
+    ViewSelection::ViewSelection()
+    :   mbEdgesOfMarkedNodesDirty(false)
+    {
+    }
+
+    void ViewSelection::SetEdgesOfMarkedNodesDirty()
+    {
+        if(!mbEdgesOfMarkedNodesDirty)
+        {
+            mbEdgesOfMarkedNodesDirty = true;
+            maEdgesOfMarkedNodes.Clear();
+            maMarkedEdgesOfMarkedNodes.Clear();
+            maAllMarkedObjects.clear();
+        }
+    }
+
+    const SdrMarkList& ViewSelection::GetEdgesOfMarkedNodes() const
+    {
+        if(mbEdgesOfMarkedNodesDirty)
+        {
+            const_cast<ViewSelection*>(this)->ImpForceEdgesOfMarkedNodes();
+        }
+
+        return maEdgesOfMarkedNodes;
+    }
+
+    const SdrMarkList& ViewSelection::GetMarkedEdgesOfMarkedNodes() const
+    {
+        if(mbEdgesOfMarkedNodesDirty)
+        {
+            const_cast<ViewSelection*>(this)->ImpForceEdgesOfMarkedNodes();
+        }
+
+        return maMarkedEdgesOfMarkedNodes;
+    }
+
+    const std::vector<SdrObject*>& ViewSelection::GetAllMarkedObjects() const
+    {
+        if(mbEdgesOfMarkedNodesDirty)
+            const_cast<ViewSelection*>(this)->ImpForceEdgesOfMarkedNodes();
+
+        return maAllMarkedObjects;
+    }
+
+    void ViewSelection::ImplCollectCompleteSelection(SdrObject* pObj)
+    {
+        if(pObj)
+        {
+            bool bIsGroup(pObj->IsGroupObject());
+
+            if(bIsGroup && dynamic_cast< const E3dObject* >(pObj) != nullptr && dynamic_cast< const E3dScene* >(pObj) == nullptr)
+            {
+                bIsGroup = false;
+            }
+
+            if(bIsGroup)
+            {
+                SdrObjList* pList = pObj->GetSubList();
+
+                for(size_t a = 0; a < pList->GetObjCount(); ++a)
+                {
+                    SdrObject* pObj2 = pList->GetObj(a);
+                    ImplCollectCompleteSelection(pObj2);
+                }
+            }
+
+            maAllMarkedObjects.push_back(pObj);
+        }
+    }
+
+    void ViewSelection::ImpForceEdgesOfMarkedNodes()
+    {
+        if(mbEdgesOfMarkedNodesDirty)
+        {
+            mbEdgesOfMarkedNodesDirty = false;
+            maMarkedObjectList.ForceSort();
+            maEdgesOfMarkedNodes.Clear();
+            maMarkedEdgesOfMarkedNodes.Clear();
+            maAllMarkedObjects.clear();
+
+            // GetMarkCount after ForceSort
+            const size_t nMarkCount(maMarkedObjectList.GetMarkCount());
+
+            for(size_t a = 0; a < nMarkCount; ++a)
+            {
+                SdrObject* pCandidate = maMarkedObjectList.GetMark(a)->GetMarkedSdrObj();
+
+                if(pCandidate)
+                {
+                    // build transitive hull
+                    ImplCollectCompleteSelection(pCandidate);
+
+                    // travel over broadcaster/listener to access edges connected to the selected object
+                    const SfxBroadcaster* pBC = pCandidate->GetBroadcaster();
+
+                    if(pBC)
+                    {
+                        const size_t nLstCnt(pBC->GetSizeOfVector());
+
+                        for(size_t nl=0; nl < nLstCnt; ++nl)
+                        {
+                            SfxListener* pLst = pBC->GetListener(nl);
+                            SdrEdgeObj* pEdge = dynamic_cast<SdrEdgeObj*>( pLst );
+
+                            if(pEdge && pEdge->IsInserted() && pEdge->getSdrPageFromSdrObject() == pCandidate->getSdrPageFromSdrObject())
+                            {
+                                SdrMark aM(pEdge, maMarkedObjectList.GetMark(a)->GetPageView());
+
+                                if(pEdge->GetConnectedNode(true) == pCandidate)
+                                {
+                                    aM.SetCon1(true);
+                                }
+
+                                if(pEdge->GetConnectedNode(false) == pCandidate)
+                                {
+                                    aM.SetCon2(true);
+                                }
+
+                                if(SAL_MAX_SIZE == maMarkedObjectList.FindObject(pEdge))
+                                {
+                                    // check if it itself is selected
+                                    maEdgesOfMarkedNodes.InsertEntry(aM);
+                                }
+                                else
+                                {
+                                    maMarkedEdgesOfMarkedNodes.InsertEntry(aM);
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+
+            maEdgesOfMarkedNodes.ForceSort();
+            maMarkedEdgesOfMarkedNodes.ForceSort();
+        }
+    }
+} // end of namespace sdr
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdmodel.cxx b/svx/source/svdraw/svdmodel.cxx
new file mode 100644
index 000000000..ccab4da45
--- /dev/null
+++ b/svx/source/svdraw/svdmodel.cxx
@@ -0,0 +1,2035 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdmodel.hxx>
+#include <cassert>
+#include <math.h>
+#include <sal/log.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <com/sun/star/lang/XComponent.hpp>
+#include <com/sun/star/document/XStorageBasedDocument.hpp>
+#include <com/sun/star/embed/ElementModes.hpp>
+#include <unotools/configmgr.hxx>
+#include <unotools/pathoptions.hxx>
+#include <svl/whiter.hxx>
+#include <svl/asiancfg.hxx>
+#include <svx/xbtmpit.hxx>
+#include <svx/xlndsit.hxx>
+#include <svx/xlnedit.hxx>
+#include <svx/xflgrit.hxx>
+#include <svx/xflftrit.hxx>
+#include <svx/xflhtit.hxx>
+#include <svx/xlnstit.hxx>
+#include <editeng/editeng.hxx>
+#include <svx/xtable.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdlayer.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdpool.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdotext.hxx>
+#include <textchain.hxx>
+#include <svx/svdetc.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svdoutlinercache.hxx>
+#include <svx/sdasitm.hxx>
+#include <officecfg/Office/Common.hxx>
+#include <editeng/fontitem.hxx>
+#include <editeng/colritem.hxx>
+#include <editeng/fhgtitem.hxx>
+#include <svl/style.hxx>
+#include <editeng/forbiddencharacterstable.hxx>
+#include <comphelper/servicehelper.hxx>
+#include <comphelper/storagehelper.hxx>
+#include <unotools/localedatawrapper.hxx>
+#include <unotools/syslocale.hxx>
+#include <editeng/eeitem.hxx>
+#include <svl/itemset.hxx>
+#include <vcl/settings.hxx>
+#include <vcl/svapp.hxx>
+#include <memory>
+#include <libxml/xmlwriter.h>
+#include <sfx2/viewsh.hxx>
+#include <o3tl/enumrange.hxx>
+#include <tools/diagnose_ex.h>
+
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::lang;
+
+
+struct SdrModelImpl
+{
+    SfxUndoManager* mpUndoManager;
+    SdrUndoFactory* mpUndoFactory;
+
+    bool mbAnchoredTextOverflowLegacy; // tdf#99729 compatibility flag
+};
+
+
+void SdrModel::ImpCtor(
+    SfxItemPool* pPool,
+    ::comphelper::IEmbeddedHelper* _pEmbeddedHelper,
+    bool bDisablePropertyFiles)
+{
+    mpImpl.reset(new SdrModelImpl);
+    mpImpl->mpUndoManager=nullptr;
+    mpImpl->mpUndoFactory=nullptr;
+    mpImpl->mbAnchoredTextOverflowLegacy = false;
+    mbInDestruction = false;
+    m_aObjUnit=SdrEngineDefaults::GetMapFraction();
+    m_eObjUnit=SdrEngineDefaults::GetMapUnit();
+    m_eUIUnit=FieldUnit::MM;
+    m_aUIScale=Fraction(1,1);
+    m_nUIUnitDecimalMark=0;
+    m_pLayerAdmin=nullptr;
+    m_pItemPool=pPool;
+    m_bMyPool=false;
+    m_pEmbeddedHelper=_pEmbeddedHelper;
+    m_pDrawOutliner=nullptr;
+    m_pHitTestOutliner=nullptr;
+    m_pRefOutDev=nullptr;
+    m_pDefaultStyleSheet=nullptr;
+    mpDefaultStyleSheetForSdrGrafObjAndSdrOle2Obj = nullptr;
+    m_pLinkManager=nullptr;
+    m_pUndoStack=nullptr;
+    m_pRedoStack=nullptr;
+    m_nMaxUndoCount=16;
+    m_pCurrentUndoGroup=nullptr;
+    m_nUndoLevel=0;
+    mbUndoEnabled=true;
+    mbChanged = false;
+    m_bPagNumsDirty=false;
+    m_bMPgNumsDirty=false;
+    m_bTransportContainer = false;
+    m_bSwapGraphics=false;
+    m_bPasteResize=false;
+    m_bReadOnly=false;
+    m_nDefaultTabulator=0;
+    m_bTransparentTextFrames=false;
+    m_bStarDrawPreviewMode = false;
+    mpForbiddenCharactersTable = nullptr;
+    mbModelLocked = false;
+    mpOutlinerCache = nullptr;
+    mbKernAsianPunctuation = false;
+    mbAddExtLeading = false;
+    mnHandoutPageCount = 0;
+
+    mbDisableTextEditUsesCommonUndoManager = false;
+
+    if (!utl::ConfigManager::IsFuzzing())
+        mnCharCompressType = static_cast<CharCompressType>(officecfg::Office::Common::AsianLayout::CompressCharacterDistance::
+            get());
+    else
+        mnCharCompressType = CharCompressType::NONE;
+
+    if ( pPool == nullptr )
+    {
+        m_pItemPool=new SdrItemPool(nullptr);
+        // Outliner doesn't have its own Pool, so use the EditEngine's
+        SfxItemPool* pOutlPool=EditEngine::CreatePool();
+        // OutlinerPool as SecondaryPool of SdrPool
+        m_pItemPool->SetSecondaryPool(pOutlPool);
+        // remember that I created both pools myself
+        m_bMyPool=true;
+    }
+    m_pItemPool->SetDefaultMetric(m_eObjUnit);
+
+// using static SdrEngineDefaults only if default SvxFontHeight item is not available
+    const SfxPoolItem* pPoolItem = m_pItemPool->GetPoolDefaultItem( EE_CHAR_FONTHEIGHT );
+    if ( pPoolItem )
+        mnDefTextHgt = static_cast<const SvxFontHeightItem*>(pPoolItem)->GetHeight();
+    else
+        mnDefTextHgt = SdrEngineDefaults::GetFontHeight();
+
+    m_pItemPool->SetPoolDefaultItem( makeSdrTextWordWrapItem( false ) );
+
+    SetTextDefaults();
+    m_pLayerAdmin.reset(new SdrLayerAdmin);
+    m_pLayerAdmin->SetModel(this);
+    ImpSetUIUnit();
+
+    // can't create DrawOutliner OnDemand, because I can't get the Pool,
+    // then (only from 302 onwards!)
+    m_pDrawOutliner = SdrMakeOutliner(OutlinerMode::TextObject, *this);
+    ImpSetOutlinerDefaults(m_pDrawOutliner.get(), true);
+
+    m_pHitTestOutliner = SdrMakeOutliner(OutlinerMode::TextObject, *this);
+    ImpSetOutlinerDefaults(m_pHitTestOutliner.get(), true);
+
+    /* Start Text Chaining related code */
+    // Initialize Chaining Outliner
+    m_pChainingOutliner = SdrMakeOutliner( OutlinerMode::TextObject, *this );
+    ImpSetOutlinerDefaults(m_pChainingOutliner.get(), true);
+
+    // Make a TextChain
+    m_pTextChain.reset(new TextChain);
+    /* End Text Chaining related code */
+
+    ImpCreateTables(bDisablePropertyFiles || utl::ConfigManager::IsFuzzing());
+}
+
+SdrModel::SdrModel(
+    SfxItemPool* pPool,
+    ::comphelper::IEmbeddedHelper* pPers,
+    bool bDisablePropertyFiles)
+:
+#ifdef DBG_UTIL
+    // SdrObjectLifetimeWatchDog:
+    maAllIncarnatedObjects(),
+#endif
+    maMaPag(),
+    maPages()
+{
+    ImpCtor(pPool,pPers,bDisablePropertyFiles);
+}
+
+SdrModel::~SdrModel()
+{
+
+    mbInDestruction = true;
+
+    Broadcast(SdrHint(SdrHintKind::ModelCleared));
+
+    mpOutlinerCache.reset();
+
+    ClearUndoBuffer();
+#ifdef DBG_UTIL
+    SAL_WARN_IF(m_pCurrentUndoGroup, "svx", "In the Dtor of the SdrModel there is an open Undo left: \""
+                    << m_pCurrentUndoGroup->GetComment() << '\"');
+#endif
+    m_pCurrentUndoGroup.reset();
+
+    ClearModel(true);
+
+#ifdef DBG_UTIL
+    // SdrObjectLifetimeWatchDog:
+    if(!maAllIncarnatedObjects.empty())
+    {
+        SAL_WARN("svx","SdrModel::~SdrModel: Not all incarnations of SdrObjects deleted, possible memory leak (!)");
+        // copy to std::vector - calling SdrObject::Free will change maAllIncarnatedObjects
+        const std::vector< const SdrObject* > maRemainingObjects(maAllIncarnatedObjects.begin(), maAllIncarnatedObjects.end());
+        for(auto pSdrObject : maRemainingObjects)
+        {
+            SdrObject* pCandidate(const_cast<SdrObject*>(pSdrObject));
+            SdrObject::Free(pCandidate);
+        }
+    }
+#endif
+
+    m_pLayerAdmin.reset();
+
+    m_pTextChain.reset();
+    // Delete DrawOutliner only after deleting ItemPool, because ItemPool
+    // references Items of the DrawOutliner!
+    m_pChainingOutliner.reset();
+    m_pHitTestOutliner.reset();
+    m_pDrawOutliner.reset();
+
+    // delete StyleSheetPool, derived classes should not do this since
+    // the DrawingEngine may need it in its destructor
+    if( mxStyleSheetPool.is() )
+    {
+        Reference< XComponent > xComponent( dynamic_cast< cppu::OWeakObject* >( mxStyleSheetPool.get() ), UNO_QUERY );
+        if( xComponent.is() ) try
+        {
+            xComponent->dispose();
+        }
+        catch( RuntimeException& )
+        {
+        }
+        mxStyleSheetPool.clear();
+    }
+
+    if (m_bMyPool)
+    {
+        // delete Pools if they're mine
+        SfxItemPool* pOutlPool=m_pItemPool->GetSecondaryPool();
+        SfxItemPool::Free(m_pItemPool);
+        // OutlinerPool has to be deleted after deleting ItemPool, because
+        // ItemPool contains SetItems that themselves reference Items from OutlinerPool.
+        SfxItemPool::Free(pOutlPool);
+    }
+
+    mpForbiddenCharactersTable.reset();
+
+    delete mpImpl->mpUndoFactory;
+}
+
+void SdrModel::SetSwapGraphics()
+{
+    m_bSwapGraphics = true;
+}
+
+bool SdrModel::IsReadOnly() const
+{
+    return m_bReadOnly;
+}
+
+void SdrModel::SetReadOnly(bool bYes)
+{
+    m_bReadOnly=bYes;
+}
+
+
+void SdrModel::SetMaxUndoActionCount(sal_uInt32 nCount)
+{
+    if (nCount<1) nCount=1;
+    m_nMaxUndoCount=nCount;
+    if (m_pUndoStack) {
+        while (m_pUndoStack->size()>m_nMaxUndoCount) {
+            m_pUndoStack->pop_back();
+        }
+    }
+}
+
+void SdrModel::ClearUndoBuffer()
+{
+    m_pUndoStack.reset();
+    m_pRedoStack.reset();
+}
+
+bool SdrModel::HasUndoActions() const
+{
+    return m_pUndoStack && !m_pUndoStack->empty();
+}
+
+bool SdrModel::HasRedoActions() const
+{
+    return m_pRedoStack && !m_pRedoStack->empty();
+}
+
+void SdrModel::Undo()
+{
+    if( mpImpl->mpUndoManager )
+    {
+        OSL_FAIL("svx::SdrModel::Undo(), method not supported with application undo manager!");
+    }
+    else
+    {
+        if(HasUndoActions())
+        {
+            SfxUndoAction* pDo = m_pUndoStack->front().get();
+            const bool bWasUndoEnabled = mbUndoEnabled;
+            mbUndoEnabled = false;
+            pDo->Undo();
+            if(!m_pRedoStack)
+                m_pRedoStack.reset(new std::deque<std::unique_ptr<SfxUndoAction>>);
+            std::unique_ptr<SfxUndoAction> p = std::move(m_pUndoStack->front());
+            m_pUndoStack->pop_front();
+            m_pRedoStack->emplace_front(std::move(p));
+            mbUndoEnabled = bWasUndoEnabled;
+        }
+    }
+}
+
+void SdrModel::Redo()
+{
+    if( mpImpl->mpUndoManager )
+    {
+        OSL_FAIL("svx::SdrModel::Redo(), method not supported with application undo manager!");
+    }
+    else
+    {
+        if(HasRedoActions())
+        {
+            SfxUndoAction* pDo = m_pRedoStack->front().get();
+            const bool bWasUndoEnabled = mbUndoEnabled;
+            mbUndoEnabled = false;
+            pDo->Redo();
+            if(!m_pUndoStack)
+                m_pUndoStack.reset(new std::deque<std::unique_ptr<SfxUndoAction>>);
+            std::unique_ptr<SfxUndoAction> p = std::move(m_pRedoStack->front());
+            m_pRedoStack->pop_front();
+            m_pUndoStack->emplace_front(std::move(p));
+            mbUndoEnabled = bWasUndoEnabled;
+        }
+    }
+}
+
+void SdrModel::Repeat(SfxRepeatTarget& rView)
+{
+    if( mpImpl->mpUndoManager )
+    {
+        OSL_FAIL("svx::SdrModel::Redo(), method not supported with application undo manager!");
+    }
+    else
+    {
+        if(HasUndoActions())
+        {
+            SfxUndoAction* pDo =  m_pUndoStack->front().get();
+            if(pDo->CanRepeat(rView))
+            {
+                pDo->Repeat(rView);
+            }
+        }
+    }
+}
+
+void SdrModel::ImpPostUndoAction(std::unique_ptr<SdrUndoAction> pUndo)
+{
+    DBG_ASSERT( mpImpl->mpUndoManager == nullptr, "svx::SdrModel::ImpPostUndoAction(), method not supported with application undo manager!" );
+    if( IsUndoEnabled() )
+    {
+        if (m_aUndoLink)
+        {
+            m_aUndoLink(std::move(pUndo));
+        }
+        else
+        {
+            if (!m_pUndoStack)
+                m_pUndoStack.reset(new std::deque<std::unique_ptr<SfxUndoAction>>);
+            m_pUndoStack->emplace_front(std::move(pUndo));
+            while (m_pUndoStack->size()>m_nMaxUndoCount)
+            {
+                m_pUndoStack->pop_back();
+            }
+            if (m_pRedoStack!=nullptr)
+                m_pRedoStack->clear();
+        }
+    }
+}
+
+void SdrModel::BegUndo()
+{
+    if( mpImpl->mpUndoManager )
+    {
+        ViewShellId nViewShellId(-1);
+        if (SfxViewShell* pViewShell = SfxViewShell::Current())
+            nViewShellId = pViewShell->GetViewShellId();
+        mpImpl->mpUndoManager->EnterListAction("","",0,nViewShellId);
+        m_nUndoLevel++;
+    }
+    else if( IsUndoEnabled() )
+    {
+        if(!m_pCurrentUndoGroup)
+        {
+            m_pCurrentUndoGroup.reset(new SdrUndoGroup(*this));
+            m_nUndoLevel=1;
+        }
+        else
+        {
+            m_nUndoLevel++;
+        }
+    }
+}
+
+void SdrModel::BegUndo(const OUString& rComment)
+{
+    if( mpImpl->mpUndoManager )
+    {
+        ViewShellId nViewShellId(-1);
+        if (SfxViewShell* pViewShell = SfxViewShell::Current())
+            nViewShellId = pViewShell->GetViewShellId();
+        mpImpl->mpUndoManager->EnterListAction( rComment, "", 0, nViewShellId );
+        m_nUndoLevel++;
+    }
+    else if( IsUndoEnabled() )
+    {
+        BegUndo();
+        if (m_nUndoLevel==1)
+        {
+            m_pCurrentUndoGroup->SetComment(rComment);
+        }
+    }
+}
+
+void SdrModel::BegUndo(const OUString& rComment, const OUString& rObjDescr, SdrRepeatFunc eFunc)
+{
+    if( mpImpl->mpUndoManager )
+    {
+        OUString aComment(rComment);
+        if( !aComment.isEmpty() && !rObjDescr.isEmpty() )
+        {
+            aComment = aComment.replaceFirst("%1", rObjDescr);
+        }
+        ViewShellId nViewShellId(-1);
+        if (SfxViewShell* pViewShell = SfxViewShell::Current())
+            nViewShellId = pViewShell->GetViewShellId();
+        mpImpl->mpUndoManager->EnterListAction( aComment,"",0,nViewShellId );
+        m_nUndoLevel++;
+    }
+    else if( IsUndoEnabled() )
+    {
+        BegUndo();
+        if (m_nUndoLevel==1)
+        {
+            m_pCurrentUndoGroup->SetComment(rComment);
+            m_pCurrentUndoGroup->SetObjDescription(rObjDescr);
+            m_pCurrentUndoGroup->SetRepeatFunction(eFunc);
+        }
+    }
+}
+
+void SdrModel::EndUndo()
+{
+    DBG_ASSERT(m_nUndoLevel!=0,"SdrModel::EndUndo(): UndoLevel is already 0!");
+    if( mpImpl->mpUndoManager )
+    {
+        if( m_nUndoLevel )
+        {
+            m_nUndoLevel--;
+            mpImpl->mpUndoManager->LeaveListAction();
+        }
+    }
+    else
+    {
+        if(m_pCurrentUndoGroup!=nullptr && IsUndoEnabled())
+        {
+            m_nUndoLevel--;
+            if(m_nUndoLevel==0)
+            {
+                if(m_pCurrentUndoGroup->GetActionCount()!=0)
+                {
+                    ImpPostUndoAction(std::move(m_pCurrentUndoGroup));
+                }
+                else
+                {
+                    // was empty
+                    m_pCurrentUndoGroup.reset();
+                }
+            }
+        }
+    }
+}
+
+void SdrModel::SetUndoComment(const OUString& rComment)
+{
+    DBG_ASSERT(m_nUndoLevel!=0,"SdrModel::SetUndoComment(): UndoLevel is already 0!");
+
+    if( mpImpl->mpUndoManager )
+    {
+        OSL_FAIL("svx::SdrModel::SetUndoComment(), method not supported with application undo manager!" );
+    }
+    else if( IsUndoEnabled() && m_nUndoLevel==1)
+    {
+        m_pCurrentUndoGroup->SetComment(rComment);
+    }
+}
+
+void SdrModel::SetUndoComment(const OUString& rComment, const OUString& rObjDescr)
+{
+    DBG_ASSERT(m_nUndoLevel!=0,"SdrModel::SetUndoComment(): UndoLevel is already 0!");
+    if( mpImpl->mpUndoManager )
+    {
+        OSL_FAIL("svx::SdrModel::SetUndoComment(), method not supported with application undo manager!" );
+    }
+    else
+    {
+        if (m_nUndoLevel==1)
+        {
+            m_pCurrentUndoGroup->SetComment(rComment);
+            m_pCurrentUndoGroup->SetObjDescription(rObjDescr);
+        }
+    }
+}
+
+void SdrModel::AddUndo(std::unique_ptr<SdrUndoAction> pUndo)
+{
+    if( mpImpl->mpUndoManager )
+    {
+        mpImpl->mpUndoManager->AddUndoAction( std::move(pUndo) );
+    }
+    else if( IsUndoEnabled() )
+    {
+        if (m_pCurrentUndoGroup)
+        {
+            m_pCurrentUndoGroup->AddAction(std::move(pUndo));
+        }
+        else
+        {
+            ImpPostUndoAction(std::move(pUndo));
+        }
+    }
+}
+
+void SdrModel::EnableUndo( bool bEnable )
+{
+    if( mpImpl->mpUndoManager )
+    {
+        mpImpl->mpUndoManager->EnableUndo( bEnable );
+    }
+    else
+    {
+        mbUndoEnabled = bEnable;
+    }
+}
+
+bool SdrModel::IsUndoEnabled() const
+{
+    if( mpImpl->mpUndoManager )
+    {
+        return mpImpl->mpUndoManager->IsUndoEnabled();
+    }
+    else
+    {
+        return mbUndoEnabled;
+    }
+}
+
+void SdrModel::ImpCreateTables(bool bDisablePropertyFiles)
+{
+    // use standard path for initial construction
+    const OUString aTablePath(!bDisablePropertyFiles ? SvtPathOptions().GetPalettePath() : "");
+
+    for( auto i : o3tl::enumrange<XPropertyListType>() )
+    {
+        maProperties[i] = XPropertyList::CreatePropertyList(i, aTablePath, ""/*TODO?*/ );
+    }
+}
+
+void SdrModel::ClearModel(bool bCalledFromDestructor)
+{
+    if(bCalledFromDestructor)
+    {
+        mbInDestruction = true;
+    }
+
+    sal_Int32 i;
+    // delete all drawing pages
+    sal_Int32 nCount=GetPageCount();
+    for (i=nCount-1; i>=0; i--)
+    {
+        DeletePage( static_cast<sal_uInt16>(i) );
+    }
+    maPages.clear();
+    PageListChanged();
+
+    // delete all Masterpages
+    nCount=GetMasterPageCount();
+    for(i=nCount-1; i>=0; i--)
+    {
+        DeleteMasterPage( static_cast<sal_uInt16>(i) );
+    }
+    maMaPag.clear();
+    MasterPageListChanged();
+
+    m_pLayerAdmin->ClearLayers();
+}
+
+SdrModel* SdrModel::AllocModel() const
+{
+    SdrModel* pModel=new SdrModel();
+    pModel->SetScaleUnit(m_eObjUnit,m_aObjUnit);
+    return pModel;
+}
+
+SdrPage* SdrModel::AllocPage(bool bMasterPage)
+{
+    return new SdrPage(*this,bMasterPage);
+}
+
+void SdrModel::SetTextDefaults() const
+{
+    SetTextDefaults( m_pItemPool, mnDefTextHgt );
+}
+
+void SdrModel::SetTextDefaults( SfxItemPool* pItemPool, sal_Int32 nDefTextHgt )
+{
+    // set application-language specific dynamic pool language defaults
+    SvxFontItem aSvxFontItem( EE_CHAR_FONTINFO) ;
+    SvxFontItem aSvxFontItemCJK(EE_CHAR_FONTINFO_CJK);
+    SvxFontItem aSvxFontItemCTL(EE_CHAR_FONTINFO_CTL);
+    LanguageType nLanguage;
+    if (!utl::ConfigManager::IsFuzzing())
+        nLanguage = Application::GetSettings().GetLanguageTag().getLanguageType();
+    else
+        nLanguage = LANGUAGE_ENGLISH_US;
+
+    // get DEFAULTFONT_LATIN_TEXT and set at pool as dynamic default
+    vcl::Font aFont(OutputDevice::GetDefaultFont(DefaultFontType::LATIN_TEXT, nLanguage, GetDefaultFontFlags::OnlyOne));
+    aSvxFontItem.SetFamily(aFont.GetFamilyType());
+    aSvxFontItem.SetFamilyName(aFont.GetFamilyName());
+    aSvxFontItem.SetStyleName(OUString());
+    aSvxFontItem.SetPitch( aFont.GetPitch());
+    aSvxFontItem.SetCharSet( aFont.GetCharSet() );
+    pItemPool->SetPoolDefaultItem(aSvxFontItem);
+
+    // get DEFAULTFONT_CJK_TEXT and set at pool as dynamic default
+    vcl::Font aFontCJK(OutputDevice::GetDefaultFont(DefaultFontType::CJK_TEXT, nLanguage, GetDefaultFontFlags::OnlyOne));
+    aSvxFontItemCJK.SetFamily( aFontCJK.GetFamilyType());
+    aSvxFontItemCJK.SetFamilyName(aFontCJK.GetFamilyName());
+    aSvxFontItemCJK.SetStyleName(OUString());
+    aSvxFontItemCJK.SetPitch( aFontCJK.GetPitch());
+    aSvxFontItemCJK.SetCharSet( aFontCJK.GetCharSet());
+    pItemPool->SetPoolDefaultItem(aSvxFontItemCJK);
+
+    // get DEFAULTFONT_CTL_TEXT and set at pool as dynamic default
+    vcl::Font aFontCTL(OutputDevice::GetDefaultFont(DefaultFontType::CTL_TEXT, nLanguage, GetDefaultFontFlags::OnlyOne));
+    aSvxFontItemCTL.SetFamily(aFontCTL.GetFamilyType());
+    aSvxFontItemCTL.SetFamilyName(aFontCTL.GetFamilyName());
+    aSvxFontItemCTL.SetStyleName(OUString());
+    aSvxFontItemCTL.SetPitch( aFontCTL.GetPitch() );
+    aSvxFontItemCTL.SetCharSet( aFontCTL.GetCharSet());
+    pItemPool->SetPoolDefaultItem(aSvxFontItemCTL);
+
+    // set dynamic FontHeight defaults
+    pItemPool->SetPoolDefaultItem( SvxFontHeightItem(nDefTextHgt, 100, EE_CHAR_FONTHEIGHT ) );
+    pItemPool->SetPoolDefaultItem( SvxFontHeightItem(nDefTextHgt, 100, EE_CHAR_FONTHEIGHT_CJK ) );
+    pItemPool->SetPoolDefaultItem( SvxFontHeightItem(nDefTextHgt, 100, EE_CHAR_FONTHEIGHT_CTL ) );
+
+    // set FontColor defaults
+    pItemPool->SetPoolDefaultItem( SvxColorItem(SdrEngineDefaults::GetFontColor(), EE_CHAR_COLOR) );
+}
+
+SdrOutliner& SdrModel::GetDrawOutliner(const SdrTextObj* pObj) const
+{
+    m_pDrawOutliner->SetTextObj(pObj);
+    return *m_pDrawOutliner;
+}
+
+SdrOutliner& SdrModel::GetChainingOutliner(const SdrTextObj* pObj) const
+{
+    m_pChainingOutliner->SetTextObj(pObj);
+    return *m_pChainingOutliner;
+}
+
+const SdrTextObj* SdrModel::GetFormattingTextObj() const
+{
+    if (m_pDrawOutliner!=nullptr) {
+        return m_pDrawOutliner->GetTextObj();
+    }
+    return nullptr;
+}
+
+void SdrModel::ImpSetOutlinerDefaults( SdrOutliner* pOutliner, bool bInit )
+{
+    // Initialization of the Outliners for drawing text and HitTest
+    if( bInit )
+    {
+        pOutliner->EraseVirtualDevice();
+        pOutliner->SetUpdateMode(false);
+        pOutliner->SetEditTextObjectPool(m_pItemPool);
+        pOutliner->SetDefTab(m_nDefaultTabulator);
+    }
+
+    pOutliner->SetRefDevice(GetRefDevice());
+    Outliner::SetForbiddenCharsTable(GetForbiddenCharsTable());
+    pOutliner->SetAsianCompressionMode( mnCharCompressType );
+    pOutliner->SetKernAsianPunctuation( IsKernAsianPunctuation() );
+    pOutliner->SetAddExtLeading( IsAddExtLeading() );
+
+    if ( !GetRefDevice() )
+    {
+        MapMode aMapMode(m_eObjUnit, Point(0,0), m_aObjUnit, m_aObjUnit);
+        pOutliner->SetRefMapMode(aMapMode);
+    }
+}
+
+void SdrModel::SetRefDevice(OutputDevice* pDev)
+{
+    m_pRefOutDev=pDev;
+    ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+    ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+    RefDeviceChanged();
+}
+
+void SdrModel::ImpReformatAllTextObjects()
+{
+    if( isLocked() )
+        return;
+
+    sal_uInt16 nCount=GetMasterPageCount();
+    sal_uInt16 nNum;
+    for (nNum=0; nNum<nCount; nNum++) {
+        GetMasterPage(nNum)->ReformatAllTextObjects();
+    }
+    nCount=GetPageCount();
+    for (nNum=0; nNum<nCount; nNum++) {
+        GetPage(nNum)->ReformatAllTextObjects();
+    }
+}
+
+/*  steps over all available pages and sends notify messages to
+    all edge objects that are connected to other objects so that
+    they may reposition themselves
+*/
+void SdrModel::ImpReformatAllEdgeObjects()
+{
+    if( isLocked() )
+        return;
+
+    sal_uInt16 nCount=GetMasterPageCount();
+    sal_uInt16 nNum;
+    for (nNum=0; nNum<nCount; nNum++)
+    {
+        GetMasterPage(nNum)->ReformatAllEdgeObjects();
+    }
+    nCount=GetPageCount();
+    for (nNum=0; nNum<nCount; nNum++)
+    {
+        GetPage(nNum)->ReformatAllEdgeObjects();
+    }
+}
+
+uno::Reference<embed::XStorage> SdrModel::GetDocumentStorage() const
+{
+    uno::Reference<document::XStorageBasedDocument> const xSBD(
+            const_cast<SdrModel*>(this)->getUnoModel(), uno::UNO_QUERY);
+    if (!xSBD.is())
+    {
+        SAL_WARN("svx", "no UNO model");
+        return nullptr;
+    }
+    return xSBD->getDocumentStorage();
+}
+
+uno::Reference<io::XInputStream>
+SdrModel::GetDocumentStream( OUString const& rURL,
+                ::comphelper::LifecycleProxy const & rProxy) const
+{
+    uno::Reference<embed::XStorage> const xStorage(GetDocumentStorage());
+    if (!xStorage.is())
+    {
+        SAL_WARN("svx", "no storage?");
+        return nullptr;
+    }
+    try {
+        uno::Reference<io::XStream> const xStream(
+            ::comphelper::OStorageHelper::GetStreamAtPackageURL(
+                xStorage, rURL, embed::ElementModes::READ, rProxy));
+        return (xStream.is()) ? xStream->getInputStream() : nullptr;
+    }
+    catch (container::NoSuchElementException const&)
+    {
+        SAL_INFO("svx", "not found");
+    }
+    catch (uno::Exception const&)
+    {
+        TOOLS_WARN_EXCEPTION("svx", "");
+    }
+    return nullptr;
+}
+
+// convert template attributes from the string into "hard" attributes
+void SdrModel::BurnInStyleSheetAttributes()
+{
+    sal_uInt16 nCount=GetMasterPageCount();
+    sal_uInt16 nNum;
+    for (nNum=0; nNum<nCount; nNum++) {
+        GetMasterPage(nNum)->BurnInStyleSheetAttributes();
+    }
+    nCount=GetPageCount();
+    for (nNum=0; nNum<nCount; nNum++) {
+        GetPage(nNum)->BurnInStyleSheetAttributes();
+    }
+}
+
+void SdrModel::RefDeviceChanged()
+{
+    Broadcast(SdrHint(SdrHintKind::RefDeviceChange));
+    ImpReformatAllTextObjects();
+}
+
+void SdrModel::SetDefaultFontHeight(sal_Int32 nVal)
+{
+    if (nVal!=mnDefTextHgt) {
+        mnDefTextHgt=nVal;
+        ImpReformatAllTextObjects();
+    }
+}
+
+void SdrModel::SetDefaultTabulator(sal_uInt16 nVal)
+{
+    if (m_nDefaultTabulator!=nVal) {
+        m_nDefaultTabulator=nVal;
+        Outliner& rOutliner=GetDrawOutliner();
+        rOutliner.SetDefTab(nVal);
+        Broadcast(SdrHint(SdrHintKind::DefaultTabChange));
+        ImpReformatAllTextObjects();
+    }
+}
+
+void SdrModel::ImpSetUIUnit()
+{
+    if(0 == m_aUIScale.GetNumerator() || 0 == m_aUIScale.GetDenominator())
+    {
+        m_aUIScale = Fraction(1,1);
+    }
+
+    // set start values
+    m_nUIUnitDecimalMark = 0;
+    sal_Int64 nMul(1);
+    sal_Int64 nDiv(1);
+
+    // normalize on meters resp. inch
+    switch (m_eObjUnit)
+    {
+        case MapUnit::Map100thMM   : m_nUIUnitDecimalMark+=5; break;
+        case MapUnit::Map10thMM    : m_nUIUnitDecimalMark+=4; break;
+        case MapUnit::MapMM         : m_nUIUnitDecimalMark+=3; break;
+        case MapUnit::MapCM         : m_nUIUnitDecimalMark+=2; break;
+        case MapUnit::Map1000thInch: m_nUIUnitDecimalMark+=3; break;
+        case MapUnit::Map100thInch : m_nUIUnitDecimalMark+=2; break;
+        case MapUnit::Map10thInch  : m_nUIUnitDecimalMark+=1; break;
+        case MapUnit::MapInch       : m_nUIUnitDecimalMark+=0; break;
+        case MapUnit::MapPoint      : nDiv=72;     break;          // 1Pt   = 1/72"
+        case MapUnit::MapTwip       : nDiv=144; m_nUIUnitDecimalMark++; break; // 1Twip = 1/1440"
+        case MapUnit::MapPixel      : break;
+        case MapUnit::MapSysFont    : break;
+        case MapUnit::MapAppFont    : break;
+        case MapUnit::MapRelative   : break;
+        default: break;
+    } // switch
+
+    // 1 mile    =  8 furlong = 63.360" = 1.609.344,0mm
+    // 1 furlong = 10 chains  =  7.920" =   201.168,0mm
+    // 1 chain   =  4 poles   =    792" =    20.116,8mm
+    // 1 pole    =  5 1/2 yd  =    198" =     5.029,2mm
+    // 1 yd      =  3 ft      =     36" =       914,4mm
+    // 1 ft      = 12 "       =      1" =       304,8mm
+    switch (m_eUIUnit)
+    {
+        case FieldUnit::NONE   : break;
+        // metric
+        case FieldUnit::MM_100TH: m_nUIUnitDecimalMark-=5; break;
+        case FieldUnit::MM     : m_nUIUnitDecimalMark-=3; break;
+        case FieldUnit::CM     : m_nUIUnitDecimalMark-=2; break;
+        case FieldUnit::M      : m_nUIUnitDecimalMark+=0; break;
+        case FieldUnit::KM     : m_nUIUnitDecimalMark+=3; break;
+        // Inch
+        case FieldUnit::TWIP   : nMul=144; m_nUIUnitDecimalMark--;  break;  // 1Twip = 1/1440"
+        case FieldUnit::POINT  : nMul=72;     break;            // 1Pt   = 1/72"
+        case FieldUnit::PICA   : nMul=6;      break;            // 1Pica = 1/6"
+        case FieldUnit::INCH   : break;                         // 1"    = 1"
+        case FieldUnit::FOOT   : nDiv*=12;    break;            // 1Ft   = 12"
+        case FieldUnit::MILE   : nDiv*=6336; m_nUIUnitDecimalMark++; break; // 1mile = 63360"
+        // other
+        case FieldUnit::CUSTOM : break;
+        case FieldUnit::PERCENT: m_nUIUnitDecimalMark+=2; break;
+        // TODO: Add code to handle the following if needed (added to remove warning)
+        case FieldUnit::CHAR   : break;
+        case FieldUnit::LINE   : break;
+        case FieldUnit::PIXEL  : break;
+        case FieldUnit::DEGREE : break;
+        case FieldUnit::SECOND : break;
+        case FieldUnit::MILLISECOND : break;
+    } // switch
+
+    // check if mapping is from metric to inch and adapt
+    const bool bMapInch(IsInch(m_eObjUnit));
+    const bool bUIMetr(IsMetric(m_eUIUnit));
+
+    if (bMapInch && bUIMetr)
+    {
+        m_nUIUnitDecimalMark += 4;
+        nMul *= 254;
+    }
+
+    // check if mapping is from inch to metric and adapt
+    const bool bMapMetr(IsMetric(m_eObjUnit));
+    const bool bUIInch(IsInch(m_eUIUnit));
+
+    if (bMapMetr && bUIInch)
+    {
+        m_nUIUnitDecimalMark -= 4;
+        nDiv *= 254;
+    }
+
+    // use temporary fraction for reduction (fallback to 32bit here),
+    // may need to be changed in the future, too
+    if(1 != nMul || 1 != nDiv)
+    {
+        const Fraction aTemp(static_cast< long >(nMul), static_cast< long >(nDiv));
+        nMul = aTemp.GetNumerator();
+        nDiv = aTemp.GetDenominator();
+    }
+
+    // #i89872# take Unit of Measurement into account
+    if(1 != m_aUIScale.GetDenominator() || 1 != m_aUIScale.GetNumerator())
+    {
+        // divide by UIScale
+        nMul *= m_aUIScale.GetDenominator();
+        nDiv *= m_aUIScale.GetNumerator();
+    }
+
+    // shorten trailing zeros for dividend
+    while(0 == (nMul % 10))
+    {
+        m_nUIUnitDecimalMark--;
+        nMul /= 10;
+    }
+
+    // shorten trailing zeros for divisor
+    while(0 == (nDiv % 10))
+    {
+        m_nUIUnitDecimalMark++;
+        nDiv /= 10;
+    }
+
+    // end preparations, set member values
+    m_aUIUnitFact = Fraction(sal_Int32(nMul), sal_Int32(nDiv));
+    m_aUIUnitStr = GetUnitString(m_eUIUnit);
+}
+
+void SdrModel::SetScaleUnit(MapUnit eMap, const Fraction& rFrac)
+{
+    if (m_eObjUnit!=eMap || m_aObjUnit!=rFrac) {
+        m_eObjUnit=eMap;
+        m_aObjUnit=rFrac;
+        m_pItemPool->SetDefaultMetric(m_eObjUnit);
+        ImpSetUIUnit();
+        ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+        ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+        ImpReformatAllTextObjects();
+    }
+}
+
+void SdrModel::SetScaleUnit(MapUnit eMap)
+{
+    if (m_eObjUnit!=eMap) {
+        m_eObjUnit=eMap;
+        m_pItemPool->SetDefaultMetric(m_eObjUnit);
+        ImpSetUIUnit();
+        ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+        ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+        ImpReformatAllTextObjects();
+    }
+}
+
+void SdrModel::SetScaleFraction(const Fraction& rFrac)
+{
+    if (m_aObjUnit!=rFrac) {
+        m_aObjUnit=rFrac;
+        ImpSetUIUnit();
+        ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+        ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+        ImpReformatAllTextObjects();
+    }
+}
+
+void SdrModel::SetUIUnit(FieldUnit eUnit)
+{
+    if (m_eUIUnit!=eUnit) {
+        m_eUIUnit=eUnit;
+        ImpSetUIUnit();
+        ImpReformatAllTextObjects();
+    }
+}
+
+void SdrModel::SetUIScale(const Fraction& rScale)
+{
+    if (m_aUIScale!=rScale) {
+        m_aUIScale=rScale;
+        ImpSetUIUnit();
+        ImpReformatAllTextObjects();
+    }
+}
+
+void SdrModel::SetUIUnit(FieldUnit eUnit, const Fraction& rScale)
+{
+    if (m_eUIUnit!=eUnit || m_aUIScale!=rScale) {
+        m_eUIUnit=eUnit;
+        m_aUIScale=rScale;
+        ImpSetUIUnit();
+        ImpReformatAllTextObjects();
+    }
+}
+
+OUString SdrModel::GetUnitString(FieldUnit eUnit)
+{
+    switch(eUnit)
+    {
+        default:
+        case FieldUnit::NONE   :
+        case FieldUnit::CUSTOM :
+            return OUString();
+        case FieldUnit::MM_100TH:
+            return OUString{"/100mm"};
+        case FieldUnit::MM     :
+            return OUString{"mm"};
+        case FieldUnit::CM     :
+            return OUString{"cm"};
+        case FieldUnit::M      :
+            return OUString{"m"};
+        case FieldUnit::KM     :
+            return OUString{"km"};
+        case FieldUnit::TWIP   :
+            return OUString{"twip"};
+        case FieldUnit::POINT  :
+            return OUString{"pt"};
+        case FieldUnit::PICA   :
+            return OUString{"pica"};
+        case FieldUnit::INCH   :
+            return OUString{"\""};
+        case FieldUnit::FOOT   :
+            return OUString{"ft"};
+        case FieldUnit::MILE   :
+            return OUString{"mile(s)"};
+        case FieldUnit::PERCENT:
+            return OUString{"%"};
+    }
+}
+
+OUString SdrModel::GetMetricString(long nVal, bool bNoUnitChars, sal_Int32 nNumDigits) const
+{
+    // #i22167#
+    // change to double precision usage to not lose decimal places
+    const bool bNegative(nVal < 0);
+    SvtSysLocale aSysLoc;
+    const LocaleDataWrapper& rLoc(aSysLoc.GetLocaleData());
+    double fLocalValue(double(nVal) * double(m_aUIUnitFact));
+
+    if(bNegative)
+    {
+        fLocalValue = -fLocalValue;
+    }
+
+    if( -1 == nNumDigits )
+    {
+        nNumDigits = LocaleDataWrapper::getNumDigits();
+    }
+
+    sal_Int32 nDecimalMark(m_nUIUnitDecimalMark);
+
+    if(nDecimalMark > nNumDigits)
+    {
+        const sal_Int32 nDiff(nDecimalMark - nNumDigits);
+        const double fFactor(pow(10.0, static_cast<int>(nDiff)));
+
+        fLocalValue /= fFactor;
+        nDecimalMark = nNumDigits;
+    }
+    else if(nDecimalMark < nNumDigits)
+    {
+        const sal_Int32 nDiff(nNumDigits - nDecimalMark);
+        const double fFactor(pow(10.0, static_cast<int>(nDiff)));
+
+        fLocalValue *= fFactor;
+        nDecimalMark = nNumDigits;
+    }
+
+    OUStringBuffer aBuf;
+    aBuf.append(static_cast<sal_Int32>(fLocalValue + 0.5));
+
+    if(nDecimalMark < 0)
+    {
+        // negative nDecimalMark (decimal point) means: add zeros
+        sal_Int32 nCount(-nDecimalMark);
+
+        for(sal_Int32 i=0; i<nCount; i++)
+            aBuf.append('0');
+
+        nDecimalMark = 0;
+    }
+
+    // the second condition needs to be <= since inside this loop
+    // also the leading zero is inserted.
+    if (nDecimalMark > 0 && aBuf.getLength() <= nDecimalMark)
+    {
+        // if necessary, add zeros before the decimal point
+        sal_Int32 nCount = nDecimalMark - aBuf.getLength();
+
+        if(nCount >= 0 && LocaleDataWrapper::isNumLeadingZero())
+            nCount++;
+
+        for(sal_Int32 i=0; i<nCount; i++)
+            aBuf.insert(0, '0');
+    }
+
+    const sal_Unicode cDec( rLoc.getNumDecimalSep()[0] );
+
+    // insert the decimal mark character
+    sal_Int32 nBeforeDecimalMark = aBuf.getLength() - nDecimalMark;
+
+    if(nDecimalMark > 0)
+        aBuf.insert(nBeforeDecimalMark, cDec);
+
+    if(!LocaleDataWrapper::isNumTrailingZeros())
+    {
+        sal_Int32 aPos=aBuf.getLength()-1;
+
+        // Remove all trailing zeros.
+        while (aPos>=0 && aBuf[aPos]=='0')
+            --aPos;
+
+        // Remove decimal if it's the last character.
+        if (aPos>=0 && aBuf[aPos]==cDec)
+            --aPos;
+
+        // Adjust aPos to index first char to be truncated, if any
+        if (++aPos<aBuf.getLength())
+            aBuf.truncate(aPos);
+    }
+
+    // if necessary, add separators before every third digit
+    if( nBeforeDecimalMark > 3 )
+    {
+        const OUString& aThoSep( rLoc.getNumThousandSep() );
+        if ( !aThoSep.isEmpty() )
+        {
+            sal_Unicode cTho( aThoSep[0] );
+            sal_Int32 i(nBeforeDecimalMark - 3);
+
+            while(i > 0)
+            {
+                aBuf.insert(i, cTho);
+                i -= 3;
+            }
+        }
+    }
+
+    if (aBuf.isEmpty())
+        aBuf.append("0");
+
+    if(bNegative)
+    {
+        aBuf.insert(0, "-");
+    }
+
+    if(!bNoUnitChars)
+        aBuf.append(m_aUIUnitStr);
+
+    return aBuf.makeStringAndClear();
+}
+
+OUString SdrModel::GetAngleString(long nAngle)
+{
+    bool bNeg = nAngle < 0;
+
+    if(bNeg)
+        nAngle = -nAngle;
+
+    OUStringBuffer aBuf;
+    aBuf.append(static_cast<sal_Int32>(nAngle));
+
+    SvtSysLocale aSysLoc;
+    const LocaleDataWrapper& rLoc = aSysLoc.GetLocaleData();
+    sal_Int32 nCount = 2;
+
+    if(LocaleDataWrapper::isNumLeadingZero())
+        nCount++;
+
+    while(aBuf.getLength() < nCount)
+        aBuf.insert(0, '0');
+
+    aBuf.insert(aBuf.getLength()-2, rLoc.getNumDecimalSep()[0]);
+
+    if(bNeg)
+        aBuf.insert(0, '-');
+
+    aBuf.append(DEGREE_CHAR);
+
+    return aBuf.makeStringAndClear();
+}
+
+OUString SdrModel::GetPercentString(const Fraction& rVal)
+{
+    sal_Int32 nMul(rVal.GetNumerator());
+    sal_Int32 nDiv(rVal.GetDenominator());
+    bool bNeg {false};
+
+    if (nDiv < 0)
+    {
+        bNeg = !bNeg;
+        nDiv = -nDiv;
+    }
+
+    if (nMul < 0)
+    {
+        bNeg = !bNeg;
+        nMul = -nMul;
+    }
+
+    sal_Int32 nPct = ((nMul*100) + nDiv/2)/nDiv;
+
+    if (bNeg)
+        nPct = -nPct;
+
+    return OUString::number(nPct) + "%";
+}
+
+void SdrModel::SetChanged(bool bFlg)
+{
+    mbChanged = bFlg;
+}
+
+void SdrModel::RecalcPageNums(bool bMaster)
+{
+    if(bMaster)
+    {
+        sal_uInt16 nCount=sal_uInt16(maMaPag.size());
+        sal_uInt16 i;
+        for (i=0; i<nCount; i++) {
+            SdrPage* pPg=maMaPag[i];
+            pPg->SetPageNum(i);
+        }
+        m_bMPgNumsDirty=false;
+    }
+    else
+    {
+        sal_uInt16 nCount=sal_uInt16(maPages.size());
+        sal_uInt16 i;
+        for (i=0; i<nCount; i++) {
+            SdrPage* pPg=maPages[i];
+            pPg->SetPageNum(i);
+        }
+        m_bPagNumsDirty=false;
+    }
+}
+
+void SdrModel::InsertPage(SdrPage* pPage, sal_uInt16 nPos)
+{
+    sal_uInt16 nCount=GetPageCount();
+    if (nPos>nCount) nPos=nCount;
+    maPages.insert(maPages.begin()+nPos,pPage);
+    PageListChanged();
+    pPage->SetInserted();
+    pPage->SetPageNum(nPos);
+
+    if (mbMakePageObjectsNamesUnique)
+        pPage->MakePageObjectsNamesUnique();
+
+    if (nPos<nCount) m_bPagNumsDirty=true;
+    SetChanged();
+    SdrHint aHint(SdrHintKind::PageOrderChange, pPage);
+    Broadcast(aHint);
+}
+
+void SdrModel::DeletePage(sal_uInt16 nPgNum)
+{
+    SdrPage* pPg=RemovePage(nPgNum);
+    delete pPg;
+}
+
+SdrPage* SdrModel::RemovePage(sal_uInt16 nPgNum)
+{
+    SdrPage* pPg=maPages[nPgNum];
+    maPages.erase(maPages.begin()+nPgNum);
+    PageListChanged();
+    if (pPg!=nullptr) {
+        pPg->SetInserted(false);
+    }
+    m_bPagNumsDirty=true;
+    SetChanged();
+    SdrHint aHint(SdrHintKind::PageOrderChange, pPg);
+    Broadcast(aHint);
+    return pPg;
+}
+
+void SdrModel::MovePage(sal_uInt16 nPgNum, sal_uInt16 nNewPos)
+{
+    SdrPage* pPg=maPages[nPgNum];
+    if (pPg!=nullptr) {
+        maPages.erase(maPages.begin()+nPgNum); // shortcut to avoid two broadcasts
+        PageListChanged();
+        pPg->SetInserted(false);
+        InsertPage(pPg,nNewPos);
+    }
+    else
+        RemovePage(nPgNum);
+}
+
+void SdrModel::InsertMasterPage(SdrPage* pPage, sal_uInt16 nPos)
+{
+    sal_uInt16 nCount=GetMasterPageCount();
+    if (nPos>nCount) nPos=nCount;
+    maMaPag.insert(maMaPag.begin()+nPos,pPage);
+    MasterPageListChanged();
+    pPage->SetInserted();
+    pPage->SetPageNum(nPos);
+
+    if (nPos<nCount) {
+        m_bMPgNumsDirty=true;
+    }
+
+    SetChanged();
+    SdrHint aHint(SdrHintKind::PageOrderChange, pPage);
+    Broadcast(aHint);
+}
+
+void SdrModel::DeleteMasterPage(sal_uInt16 nPgNum)
+{
+    SdrPage* pPg=RemoveMasterPage(nPgNum);
+    delete pPg;
+}
+
+SdrPage* SdrModel::RemoveMasterPage(sal_uInt16 nPgNum)
+{
+    SdrPage* pRetPg=maMaPag[nPgNum];
+    maMaPag.erase(maMaPag.begin()+nPgNum);
+    MasterPageListChanged();
+
+    if(pRetPg)
+    {
+        // Now delete the links from the normal drawing pages to the deleted master page.
+        sal_uInt16 nPageCnt(GetPageCount());
+
+        for(sal_uInt16 np(0); np < nPageCnt; np++)
+        {
+            GetPage(np)->TRG_ImpMasterPageRemoved(*pRetPg);
+        }
+
+        pRetPg->SetInserted(false);
+    }
+
+    m_bMPgNumsDirty=true;
+    SetChanged();
+    SdrHint aHint(SdrHintKind::PageOrderChange, pRetPg);
+    Broadcast(aHint);
+    return pRetPg;
+}
+
+void SdrModel::MoveMasterPage(sal_uInt16 nPgNum, sal_uInt16 nNewPos)
+{
+    SdrPage* pPg=maMaPag[nPgNum];
+    maMaPag.erase(maMaPag.begin()+nPgNum);
+    MasterPageListChanged();
+    if (pPg!=nullptr) {
+        pPg->SetInserted(false);
+        maMaPag.insert(maMaPag.begin()+nNewPos,pPg);
+        MasterPageListChanged();
+    }
+    m_bMPgNumsDirty=true;
+    SetChanged();
+    SdrHint aHint(SdrHintKind::PageOrderChange, pPg);
+    Broadcast(aHint);
+}
+
+
+void SdrModel::CopyPages(sal_uInt16 nFirstPageNum, sal_uInt16 nLastPageNum,
+                         sal_uInt16 nDestPos,
+                         bool bUndo, bool bMoveNoCopy)
+{
+    if( bUndo && !IsUndoEnabled() )
+        bUndo = false;
+
+    if( bUndo )
+        BegUndo(SvxResId(STR_UndoMergeModel));
+
+    sal_uInt16 nPageCnt=GetPageCount();
+    sal_uInt16 nMaxPage=nPageCnt;
+
+    if (nMaxPage!=0)
+        nMaxPage--;
+    if (nFirstPageNum>nMaxPage)
+        nFirstPageNum=nMaxPage;
+    if (nLastPageNum>nMaxPage)
+        nLastPageNum =nMaxPage;
+    bool bReverse=nLastPageNum<nFirstPageNum;
+    if (nDestPos>nPageCnt)
+        nDestPos=nPageCnt;
+
+    // at first, save the pointers of the affected pages in an array
+    sal_uInt16 nPageNum=nFirstPageNum;
+    sal_uInt16 nCopyCnt=((!bReverse)?(nLastPageNum-nFirstPageNum):(nFirstPageNum-nLastPageNum))+1;
+    std::unique_ptr<SdrPage*[]> pPagePtrs(new SdrPage*[nCopyCnt]);
+    sal_uInt16 nCopyNum;
+    for(nCopyNum=0; nCopyNum<nCopyCnt; nCopyNum++)
+    {
+        pPagePtrs[nCopyNum]=GetPage(nPageNum);
+        if (bReverse)
+            nPageNum--;
+        else
+            nPageNum++;
+    }
+
+    // now copy the pages
+    sal_uInt16 nDestNum=nDestPos;
+    for (nCopyNum=0; nCopyNum<nCopyCnt; nCopyNum++)
+    {
+        SdrPage* pPg=pPagePtrs[nCopyNum];
+        sal_uInt16 nPageNum2=pPg->GetPageNum();
+        if (!bMoveNoCopy)
+        {
+            const SdrPage* pPg1=GetPage(nPageNum2);
+
+            // Clone to local model
+            pPg = pPg1->CloneSdrPage(*this);
+
+            InsertPage(pPg,nDestNum);
+            if (bUndo)
+                AddUndo(GetSdrUndoFactory().CreateUndoCopyPage(*pPg));
+            nDestNum++;
+        }
+        else
+        {
+            // TODO: Move is untested!
+            if (nDestNum>nPageNum2)
+                nDestNum--;
+
+            if(bUndo)
+                AddUndo(GetSdrUndoFactory().CreateUndoSetPageNum(*GetPage(nPageNum2),nPageNum2,nDestNum));
+
+            pPg=RemovePage(nPageNum2);
+            InsertPage(pPg,nDestNum);
+            nDestNum++;
+        }
+
+        if(bReverse)
+            nPageNum2--;
+        else
+            nPageNum2++;
+    }
+
+    pPagePtrs.reset();
+    if(bUndo)
+        EndUndo();
+}
+
+void SdrModel::Merge(SdrModel& rSourceModel,
+                     sal_uInt16 nFirstPageNum, sal_uInt16 nLastPageNum,
+                     sal_uInt16 nDestPos,
+                     bool bMergeMasterPages, bool bAllMasterPages,
+                     bool bUndo, bool bTreadSourceAsConst)
+{
+    if (&rSourceModel==this)
+    {
+        CopyPages(nFirstPageNum,nLastPageNum,nDestPos,bUndo,!bTreadSourceAsConst);
+        return;
+    }
+
+    if( bUndo && !IsUndoEnabled() )
+        bUndo = false;
+
+    if (bUndo)
+        BegUndo(SvxResId(STR_UndoMergeModel));
+
+    sal_uInt16 nSrcPageCnt=rSourceModel.GetPageCount();
+    sal_uInt16 nSrcMasterPageCnt=rSourceModel.GetMasterPageCount();
+    sal_uInt16 nDstMasterPageCnt=GetMasterPageCount();
+    bool bInsPages=(nFirstPageNum<nSrcPageCnt || nLastPageNum<nSrcPageCnt);
+    sal_uInt16 nMaxSrcPage=nSrcPageCnt; if (nMaxSrcPage!=0) nMaxSrcPage--;
+    if (nFirstPageNum>nMaxSrcPage) nFirstPageNum=nMaxSrcPage;
+    if (nLastPageNum>nMaxSrcPage)  nLastPageNum =nMaxSrcPage;
+    bool bReverse=nLastPageNum<nFirstPageNum;
+
+    std::unique_ptr<sal_uInt16[]> pMasterMap;
+    std::unique_ptr<bool[]> pMasterNeed;
+    sal_uInt16    nMasterNeed=0;
+    if (bMergeMasterPages && nSrcMasterPageCnt!=0) {
+        // determine which MasterPages from rSrcModel we need
+        pMasterMap.reset(new sal_uInt16[nSrcMasterPageCnt]);
+        pMasterNeed.reset(new bool[nSrcMasterPageCnt]);
+        memset(pMasterMap.get(),0xFF,nSrcMasterPageCnt*sizeof(sal_uInt16));
+        if (bAllMasterPages) {
+            memset(pMasterNeed.get(), true, nSrcMasterPageCnt * sizeof(bool));
+        } else {
+            memset(pMasterNeed.get(), false, nSrcMasterPageCnt * sizeof(bool));
+            sal_uInt16 nStart= bReverse ? nLastPageNum : nFirstPageNum;
+            sal_uInt16 nEnd= bReverse ? nFirstPageNum : nLastPageNum;
+            for (sal_uInt16 i=nStart; i<=nEnd; i++) {
+                const SdrPage* pPg=rSourceModel.GetPage(i);
+                if(pPg->TRG_HasMasterPage())
+                {
+                    SdrPage& rMasterPage = pPg->TRG_GetMasterPage();
+                    sal_uInt16 nMPgNum(rMasterPage.GetPageNum());
+
+                    if(nMPgNum < nSrcMasterPageCnt)
+                    {
+                        pMasterNeed[nMPgNum] = true;
+                    }
+                }
+            }
+        }
+        // now determine the Mapping of the MasterPages
+        sal_uInt16 nCurrentMaPagNum=nDstMasterPageCnt;
+        for (sal_uInt16 i=0; i<nSrcMasterPageCnt; i++) {
+            if (pMasterNeed[i]) {
+                pMasterMap[i]=nCurrentMaPagNum;
+                nCurrentMaPagNum++;
+                nMasterNeed++;
+            }
+        }
+    }
+
+    // get the MasterPages
+    if (pMasterMap && pMasterNeed && nMasterNeed!=0) {
+        for (sal_uInt16 i=nSrcMasterPageCnt; i>0;) {
+            i--;
+            if (pMasterNeed[i])
+            {
+                // Always Clone to new model
+                const SdrPage* pPg1(rSourceModel.GetMasterPage(i));
+                SdrPage* pPg(pPg1->CloneSdrPage(*this));
+
+                if(!bTreadSourceAsConst)
+                {
+                    // if requested, delete original/modify original model
+                    delete rSourceModel.RemoveMasterPage(i);
+                }
+
+                if (pPg!=nullptr) {
+                    // Now append all of them to the end of the DstModel.
+                    // Don't use InsertMasterPage(), because everything is
+                    // inconsistent until all are in.
+                    maMaPag.insert(maMaPag.begin()+nDstMasterPageCnt, pPg);
+                    MasterPageListChanged();
+                    pPg->SetInserted();
+                    m_bMPgNumsDirty=true;
+                    if (bUndo) AddUndo(GetSdrUndoFactory().CreateUndoNewPage(*pPg));
+                } else {
+                    OSL_FAIL("SdrModel::Merge(): MasterPage not found in SourceModel.");
+                }
+            }
+        }
+    }
+
+    // get the drawing pages
+    if (bInsPages) {
+        sal_uInt16 nSourcePos=nFirstPageNum;
+        sal_uInt16 nMergeCount=sal_uInt16(std::abs(static_cast<long>(static_cast<long>(nFirstPageNum)-nLastPageNum))+1);
+        if (nDestPos>GetPageCount()) nDestPos=GetPageCount();
+        while (nMergeCount>0)
+        {
+            // Always Clone to new model
+            const SdrPage* pPg1(rSourceModel.GetPage(nSourcePos));
+            SdrPage* pPg(pPg1->CloneSdrPage(*this));
+
+            if(!bTreadSourceAsConst)
+            {
+                // if requested, delete original/modify original model
+                delete rSourceModel.RemovePage(nSourcePos);
+            }
+
+            if (pPg!=nullptr) {
+                InsertPage(pPg,nDestPos);
+                if (bUndo) AddUndo(GetSdrUndoFactory().CreateUndoNewPage(*pPg));
+
+                if(pPg->TRG_HasMasterPage())
+                {
+                    SdrPage& rMasterPage = pPg->TRG_GetMasterPage();
+                    sal_uInt16 nMaPgNum(rMasterPage.GetPageNum());
+
+                    if (bMergeMasterPages)
+                    {
+                        sal_uInt16 nNewNum(0xFFFF);
+
+                        if(pMasterMap)
+                        {
+                            nNewNum = pMasterMap[nMaPgNum];
+                        }
+
+                        if(nNewNum != 0xFFFF)
+                        {
+                            // tdf#90357 here pPg and the to-be-set new masterpage are parts of the new model
+                            // already, but the currently set masterpage is part of the old model. Remove master
+                            // page from already cloned page to prevent creating wrong undo action that can
+                            // eventually crash the app.
+                            // Do *not* remove it directly after cloning - the old masterpage is still needed
+                            // later to find the new to-be-set masterpage.
+                            pPg->TRG_ClearMasterPage();
+
+                            if(bUndo)
+                            {
+                                AddUndo(GetSdrUndoFactory().CreateUndoPageChangeMasterPage(*pPg));
+                            }
+
+                            pPg->TRG_SetMasterPage(*GetMasterPage(nNewNum));
+                        }
+                        DBG_ASSERT(nNewNum!=0xFFFF,"SdrModel::Merge(): Something is crooked with the mapping of the MasterPages.");
+                    } else {
+                        if (nMaPgNum>=nDstMasterPageCnt) {
+                            // This is outside of the original area of the MasterPage of the DstModel.
+                            pPg->TRG_ClearMasterPage();
+                        }
+                    }
+                }
+
+            } else {
+                OSL_FAIL("SdrModel::Merge(): Drawing page not found in SourceModel.");
+            }
+            nDestPos++;
+            if (bReverse) nSourcePos--;
+            else if (bTreadSourceAsConst) nSourcePos++;
+            nMergeCount--;
+        }
+    }
+
+    pMasterMap.reset();
+    pMasterNeed.reset();
+
+    m_bMPgNumsDirty=true;
+    m_bPagNumsDirty=true;
+
+    SetChanged();
+    // TODO: Missing: merging and mapping of layers
+    // at the objects as well as at the MasterPageDescriptors
+    if (bUndo) EndUndo();
+}
+
+void SdrModel::SetStarDrawPreviewMode(bool bPreview)
+{
+    if (!bPreview && m_bStarDrawPreviewMode && GetPageCount())
+    {
+        // Resetting is not allowed, because the Model might not be loaded completely
+        SAL_WARN("svx", "SdrModel::SetStarDrawPreviewMode(): Resetting not allowed, because Model might not be complete.");
+    }
+    else
+    {
+        m_bStarDrawPreviewMode = bPreview;
+    }
+}
+
+uno::Reference< uno::XInterface > const & SdrModel::getUnoModel()
+{
+    if( !mxUnoModel.is() )
+        mxUnoModel = createUnoModel();
+
+    return mxUnoModel;
+}
+
+void SdrModel::setUnoModel( const css::uno::Reference< css::uno::XInterface >& xModel )
+{
+    mxUnoModel = xModel;
+}
+
+void SdrModel::adaptSizeAndBorderForAllPages(
+    const Size& /*rNewSize*/,
+    long /*nLeft*/,
+    long /*nRight*/,
+    long /*nUpper*/,
+    long /*nLower*/)
+{
+    // base implementation does currently nothing. It may be added if needed,
+    // but we are on SdrModel level here, thus probably have not enough information
+    // to do this for higher-level (derived) Models (e.g. Draw/Impress)
+}
+
+uno::Reference< uno::XInterface > SdrModel::createUnoModel()
+{
+    OSL_FAIL( "SdrModel::createUnoModel() - base implementation should not be called!" );
+    css::uno::Reference< css::uno::XInterface > xInt;
+    return xInt;
+}
+
+void SdrModel::setLock( bool bLock )
+{
+    if( mbModelLocked != bLock )
+    {
+        // #i120437# need to set first, else ImpReformatAllEdgeObjects will do nothing
+        mbModelLocked = bLock;
+
+        if( !bLock )
+        {
+            ImpReformatAllEdgeObjects();
+        }
+    }
+}
+
+
+void SdrModel::MigrateItemSet( const SfxItemSet* pSourceSet, SfxItemSet* pDestSet, SdrModel* pNewModelel )
+{
+    assert(pNewModelel != nullptr);
+    if( pSourceSet && pDestSet && (pSourceSet != pDestSet ) )
+    {
+        SfxWhichIter aWhichIter(*pSourceSet);
+        sal_uInt16 nWhich(aWhichIter.FirstWhich());
+        const SfxPoolItem *pPoolItem;
+
+        while(nWhich)
+        {
+            if(SfxItemState::SET == pSourceSet->GetItemState(nWhich, false, &pPoolItem))
+            {
+                std::unique_ptr<SfxPoolItem> pResultItem;
+
+                switch( nWhich )
+                {
+                case XATTR_FILLBITMAP:
+                    pResultItem = static_cast<const XFillBitmapItem*>(pPoolItem)->checkForUniqueItem( pNewModelel );
+                    break;
+                case XATTR_LINEDASH:
+                    pResultItem = static_cast<const XLineDashItem*>(pPoolItem)->checkForUniqueItem( pNewModelel );
+                    break;
+                case XATTR_LINESTART:
+                    pResultItem = static_cast<const XLineStartItem*>(pPoolItem)->checkForUniqueItem( pNewModelel );
+                    break;
+                case XATTR_LINEEND:
+                    pResultItem = static_cast<const XLineEndItem*>(pPoolItem)->checkForUniqueItem( pNewModelel );
+                    break;
+                case XATTR_FILLGRADIENT:
+                    pResultItem = static_cast<const XFillGradientItem*>(pPoolItem)->checkForUniqueItem( pNewModelel );
+                    break;
+                case XATTR_FILLFLOATTRANSPARENCE:
+                    // allow all kinds of XFillFloatTransparenceItem to be set
+                    pResultItem = static_cast<const XFillFloatTransparenceItem*>(pPoolItem)->checkForUniqueItem( pNewModelel );
+                    break;
+                case XATTR_FILLHATCH:
+                    pResultItem = static_cast<const XFillHatchItem*>(pPoolItem)->checkForUniqueItem( pNewModelel );
+                    break;
+                }
+
+                // set item
+                if( pResultItem )
+                {
+                    pDestSet->Put(*pResultItem);
+                    pResultItem.reset();
+                }
+                else
+                    pDestSet->Put(*pPoolItem);
+            }
+            nWhich = aWhichIter.NextWhich();
+        }
+    }
+}
+
+
+void SdrModel::SetForbiddenCharsTable(const std::shared_ptr<SvxForbiddenCharactersTable>& xForbiddenChars)
+{
+    mpForbiddenCharactersTable = xForbiddenChars;
+
+    ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+    ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+}
+
+
+void SdrModel::SetCharCompressType( CharCompressType nType )
+{
+    if( nType != mnCharCompressType )
+    {
+        mnCharCompressType = nType;
+        ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+        ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+    }
+}
+
+void SdrModel::SetKernAsianPunctuation( bool bEnabled )
+{
+    if( mbKernAsianPunctuation != bEnabled )
+    {
+        mbKernAsianPunctuation = bEnabled;
+        ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+        ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+    }
+}
+
+void SdrModel::SetAddExtLeading( bool bEnabled )
+{
+    if( mbAddExtLeading != bEnabled )
+    {
+        mbAddExtLeading = bEnabled;
+        ImpSetOutlinerDefaults( m_pDrawOutliner.get() );
+        ImpSetOutlinerDefaults( m_pHitTestOutliner.get() );
+    }
+}
+
+void SdrModel::SetAnchoredTextOverflowLegacy(bool bEnabled)
+{
+    mpImpl->mbAnchoredTextOverflowLegacy = bEnabled;
+}
+
+bool SdrModel::IsAnchoredTextOverflowLegacy() const
+{
+    return mpImpl->mbAnchoredTextOverflowLegacy;
+}
+
+void SdrModel::ReformatAllTextObjects()
+{
+    ImpReformatAllTextObjects();
+}
+
+std::unique_ptr<SdrOutliner> SdrModel::createOutliner( OutlinerMode nOutlinerMode )
+{
+    if( !mpOutlinerCache )
+        mpOutlinerCache.reset(new SdrOutlinerCache(this));
+
+    return mpOutlinerCache->createOutliner( nOutlinerMode );
+}
+
+std::vector<SdrOutliner*> SdrModel::GetActiveOutliners() const
+{
+    std::vector< SdrOutliner* > aRet(mpOutlinerCache ? mpOutlinerCache->GetActiveOutliners() : std::vector< SdrOutliner* >());
+    aRet.push_back(m_pDrawOutliner.get());
+    aRet.push_back(m_pHitTestOutliner.get());
+
+    return aRet;
+}
+
+void SdrModel::disposeOutliner( std::unique_ptr<SdrOutliner> pOutliner )
+{
+    if( mpOutlinerCache )
+        mpOutlinerCache->disposeOutliner( std::move(pOutliner) );
+}
+
+SvxNumType SdrModel::GetPageNumType() const
+{
+    return SVX_NUM_ARABIC;
+}
+
+void SdrModel::ReadUserDataSequenceValue(const css::beans::PropertyValue* pValue)
+{
+    bool bBool = false;
+    if (pValue->Name == "AnchoredTextOverflowLegacy")
+    {
+        if (pValue->Value >>= bBool)
+        {
+            mpImpl->mbAnchoredTextOverflowLegacy = bBool;
+        }
+    }
+}
+
+template <typename T>
+static void addPair(std::vector< std::pair< OUString, Any > >& aUserData, const OUString& name, const T val)
+{
+    aUserData.push_back(std::pair< OUString, Any >(name, css::uno::makeAny(val)));
+}
+
+void SdrModel::WriteUserDataSequence(css::uno::Sequence < css::beans::PropertyValue >& rValues)
+{
+    std::vector< std::pair< OUString, Any > > aUserData;
+    addPair(aUserData, "AnchoredTextOverflowLegacy", IsAnchoredTextOverflowLegacy());
+
+    const sal_Int32 nOldLength = rValues.getLength();
+    rValues.realloc(nOldLength + aUserData.size());
+
+    css::beans::PropertyValue* pValue = &(rValues.getArray()[nOldLength]);
+
+    for (const auto &aIter : aUserData)
+    {
+        pValue->Name = aIter.first;
+        pValue->Value = aIter.second;
+        ++pValue;
+    }
+}
+
+const SdrPage* SdrModel::GetPage(sal_uInt16 nPgNum) const
+{
+    DBG_ASSERT(nPgNum < maPages.size(), "SdrModel::GetPage: Access out of range (!)");
+    return nPgNum < maPages.size() ? maPages[nPgNum] : nullptr;
+}
+
+SdrPage* SdrModel::GetPage(sal_uInt16 nPgNum)
+{
+    DBG_ASSERT(nPgNum < maPages.size(), "SdrModel::GetPage: Access out of range (!)");
+    return nPgNum < maPages.size() ? maPages[nPgNum] : nullptr;
+}
+
+sal_uInt16 SdrModel::GetPageCount() const
+{
+    return sal_uInt16(maPages.size());
+}
+
+void SdrModel::PageListChanged()
+{
+}
+
+TextChain *SdrModel::GetTextChain() const
+{
+    return m_pTextChain.get();
+}
+
+const SdrPage* SdrModel::GetMasterPage(sal_uInt16 nPgNum) const
+{
+    DBG_ASSERT(nPgNum < maMaPag.size(), "SdrModel::GetMasterPage: Access out of range (!)");
+    return maMaPag[nPgNum];
+}
+
+SdrPage* SdrModel::GetMasterPage(sal_uInt16 nPgNum)
+{
+    DBG_ASSERT(nPgNum < maMaPag.size(), "SdrModel::GetMasterPage: Access out of range (!)");
+    return maMaPag[nPgNum];
+}
+
+sal_uInt16 SdrModel::GetMasterPageCount() const
+{
+    return sal_uInt16(maMaPag.size());
+}
+
+void SdrModel::MasterPageListChanged()
+{
+}
+
+void SdrModel::SetSdrUndoManager( SfxUndoManager* pUndoManager )
+{
+    mpImpl->mpUndoManager = pUndoManager;
+}
+
+SfxUndoManager* SdrModel::GetSdrUndoManager() const
+{
+    return mpImpl->mpUndoManager;
+}
+
+SdrUndoFactory& SdrModel::GetSdrUndoFactory() const
+{
+    if( !mpImpl->mpUndoFactory )
+        mpImpl->mpUndoFactory = new SdrUndoFactory;
+    return *mpImpl->mpUndoFactory;
+}
+
+void SdrModel::SetSdrUndoFactory( SdrUndoFactory* pUndoFactory )
+{
+    if( pUndoFactory && (pUndoFactory != mpImpl->mpUndoFactory) )
+    {
+        delete mpImpl->mpUndoFactory;
+        mpImpl->mpUndoFactory = pUndoFactory;
+    }
+}
+
+void SdrModel::dumpAsXml(xmlTextWriterPtr pWriter) const
+{
+    xmlTextWriterStartElement(pWriter, BAD_CAST("SdrModel"));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this);
+
+    sal_uInt16 nPageCount = GetPageCount();
+    for (sal_uInt16 i = 0; i < nPageCount; ++i)
+    {
+        if (const SdrPage* pPage = GetPage(i))
+            pPage->dumpAsXml(pWriter);
+    }
+
+    xmlTextWriterEndElement(pWriter);
+}
+
+namespace
+{
+    class theSdrModelUnoTunnelImplementationId : public rtl::Static< UnoTunnelIdInit, theSdrModelUnoTunnelImplementationId > {};
+}
+
+const css::uno::Sequence< sal_Int8 >& SdrModel::getUnoTunnelId()
+{
+    return theSdrModelUnoTunnelImplementationId::get().getSeq();
+}
+
+
+SdrHint::SdrHint(SdrHintKind eNewHint)
+:   SfxHint(SfxHintId::ThisIsAnSdrHint),
+    meHint(eNewHint),
+    mpObj(nullptr),
+    mpPage(nullptr)
+{
+}
+
+SdrHint::SdrHint(SdrHintKind eNewHint, const SdrObject& rNewObj)
+:   SfxHint(SfxHintId::ThisIsAnSdrHint),
+    meHint(eNewHint),
+    mpObj(&rNewObj),
+    mpPage(rNewObj.getSdrPageFromSdrObject())
+{
+}
+
+SdrHint::SdrHint(SdrHintKind eNewHint, const SdrPage* pPage)
+:   SfxHint(SfxHintId::ThisIsAnSdrHint),
+    meHint(eNewHint),
+    mpObj(nullptr),
+    mpPage(pPage)
+{
+}
+
+SdrHint::SdrHint(SdrHintKind eNewHint, const SdrObject& rNewObj, const SdrPage* pPage)
+:   SfxHint(SfxHintId::ThisIsAnSdrHint),
+    meHint(eNewHint),
+    mpObj(&rNewObj),
+    mpPage(pPage)
+{
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdmrkv.cxx b/svx/source/svdraw/svdmrkv.cxx
new file mode 100644
index 000000000..3e28a3956
--- /dev/null
+++ b/svx/source/svdraw/svdmrkv.cxx
@@ -0,0 +1,2479 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdmrkv.hxx>
+#include <svx/svdview.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdotable.hxx>
+
+#include <osl/thread.h>
+#include <rtl/strbuf.hxx>
+#include <svx/svdoole2.hxx>
+#include <svx/xgrad.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflgrit.hxx>
+#include "gradtrns.hxx"
+#include <svx/xflftrit.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdundo.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/scene3d.hxx>
+#include <svx/svdovirt.hxx>
+#include <sdr/overlay/overlayrollingrectangle.hxx>
+#include <svx/sdr/contact/objectcontact.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <svx/sdrhittesthelper.hxx>
+#include <vcl/uitest/logger.hxx>
+#include <vcl/uitest/eventdescription.hxx>
+
+#include <LibreOfficeKit/LibreOfficeKitEnums.h>
+#include <comphelper/lok.hxx>
+#include <sfx2/lokhelper.hxx>
+#include <sfx2/lokcharthelper.hxx>
+#include <sfx2/viewsh.hxx>
+
+#include <array>
+
+#include <com/sun/star/frame/XController.hpp>
+#include <com/sun/star/view/XSelectionSupplier.hpp>
+
+#include <boost/property_tree/json_parser.hpp>
+
+using namespace com::sun::star;
+
+// Migrate Marking of Objects, Points and GluePoints
+
+class ImplMarkingOverlay
+{
+    // The OverlayObjects
+    sdr::overlay::OverlayObjectList               maObjects;
+
+    // The remembered second position in logical coordinates
+    basegfx::B2DPoint                               maSecondPosition;
+
+    // A flag to remember if the action is for unmarking.
+    bool                                            mbUnmarking : 1;
+
+public:
+    ImplMarkingOverlay(const SdrPaintView& rView, const basegfx::B2DPoint& rStartPos, bool bUnmarking);
+
+    // The OverlayObjects are cleared using the destructor of OverlayObjectList.
+    // That destructor calls clear() at the list which removes all objects from the
+    // OverlayManager and deletes them.
+
+    void SetSecondPosition(const basegfx::B2DPoint& rNewPosition);
+    bool IsUnmarking() const { return mbUnmarking; }
+};
+
+ImplMarkingOverlay::ImplMarkingOverlay(const SdrPaintView& rView, const basegfx::B2DPoint& rStartPos, bool bUnmarking)
+:   maSecondPosition(rStartPos),
+    mbUnmarking(bUnmarking)
+{
+    if (comphelper::LibreOfficeKit::isActive())
+        return; // We do client-side object manipulation with the Kit API
+
+    for(sal_uInt32 a(0); a < rView.PaintWindowCount(); a++)
+    {
+        SdrPaintWindow* pCandidate = rView.GetPaintWindow(a);
+        const rtl::Reference< sdr::overlay::OverlayManager >& xTargetOverlay = pCandidate->GetOverlayManager();
+
+        if (xTargetOverlay.is())
+        {
+            std::unique_ptr<sdr::overlay::OverlayRollingRectangleStriped> pNew(new sdr::overlay::OverlayRollingRectangleStriped(
+                rStartPos, rStartPos, false));
+            xTargetOverlay->add(*pNew);
+            maObjects.append(std::move(pNew));
+        }
+    }
+}
+
+void ImplMarkingOverlay::SetSecondPosition(const basegfx::B2DPoint& rNewPosition)
+{
+    if(rNewPosition != maSecondPosition)
+    {
+        // apply to OverlayObjects
+        for(sal_uInt32 a(0); a < maObjects.count(); a++)
+        {
+            sdr::overlay::OverlayRollingRectangleStriped& rCandidate = static_cast< sdr::overlay::OverlayRollingRectangleStriped&>(maObjects.getOverlayObject(a));
+            rCandidate.setSecondPosition(rNewPosition);
+        }
+
+        // remember new position
+        maSecondPosition = rNewPosition;
+    }
+}
+
+
+// MarkView
+
+
+void SdrMarkView::ImpClearVars()
+{
+    meDragMode=SdrDragMode::Move;
+    meEditMode=SdrViewEditMode::Edit;
+    meEditMode0=SdrViewEditMode::Edit;
+    mbDesignMode=false;
+    mpMarkedObj=nullptr;
+    mpMarkedPV=nullptr;
+    mbForceFrameHandles=false;
+    mbPlusHdlAlways=false;
+    mnFrameHandlesLimit=50;
+    mbInsPolyPoint=false;
+    mbMarkedObjRectDirty=false;
+    mbMarkedPointsRectsDirty=false;
+    mbMarkHandlesHidden = false;
+    mbMrkPntDirty=false;
+
+    // Migrate selections
+    BrkMarkObj();
+    BrkMarkPoints();
+    BrkMarkGluePoints();
+}
+
+SdrMarkView::SdrMarkView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrSnapView(rSdrModel, pOut),
+    mpMarkObjOverlay(nullptr),
+    mpMarkPointsOverlay(nullptr),
+    mpMarkGluePointsOverlay(nullptr),
+    maHdlList(this)
+{
+    ImpClearVars();
+    StartListening(rSdrModel);
+}
+
+SdrMarkView::~SdrMarkView()
+{
+    // Migrate selections
+    BrkMarkObj();
+    BrkMarkPoints();
+    BrkMarkGluePoints();
+}
+
+void SdrMarkView::Notify(SfxBroadcaster& rBC, const SfxHint& rHint)
+{
+    if (rHint.GetId() == SfxHintId::ThisIsAnSdrHint)
+    {
+        const SdrHint* pSdrHint = static_cast<const SdrHint*>(&rHint);
+        SdrHintKind eKind=pSdrHint->GetKind();
+        if (eKind==SdrHintKind::ObjectChange || eKind==SdrHintKind::ObjectInserted || eKind==SdrHintKind::ObjectRemoved)
+        {
+            mbMarkedObjRectDirty=true;
+            mbMarkedPointsRectsDirty=true;
+        }
+    }
+    SdrSnapView::Notify(rBC,rHint);
+}
+
+void SdrMarkView::ModelHasChanged()
+{
+    SdrPaintView::ModelHasChanged();
+    GetMarkedObjectListWriteAccess().SetNameDirty();
+    mbMarkedObjRectDirty=true;
+    mbMarkedPointsRectsDirty=true;
+    // Example: Obj is selected and maMarkedObjectList is sorted.
+    // In another View 2, the ObjOrder is changed (e. g. MovToTop())
+    // Then we need to re-sort MarkList.
+    GetMarkedObjectListWriteAccess().SetUnsorted();
+    SortMarkedObjects();
+    mbMrkPntDirty=true;
+    UndirtyMrkPnt();
+    SdrView* pV=static_cast<SdrView*>(this);
+    if (pV!=nullptr && !pV->IsDragObj() && !pV->IsInsObjPoint()) {
+        AdjustMarkHdl();
+    }
+
+    if (comphelper::LibreOfficeKit::isActive() && GetMarkedObjectCount() > 0)
+    {
+        //TODO: Is MarkedObjRect valid at this point?
+        tools::Rectangle aSelection(GetMarkedObjRect());
+        OString sSelection;
+        if (aSelection.IsEmpty())
+            sSelection = "EMPTY";
+        else
+        {
+            sal_uInt32 nTotalPaintWindows = this->PaintWindowCount();
+            if (nTotalPaintWindows == 1)
+            {
+                const vcl::Window* pWin = dynamic_cast<const vcl::Window*>(this->GetFirstOutputDevice());
+                if (pWin && pWin->IsChart())
+                {
+                    const vcl::Window* pViewShellWindow = GetSfxViewShell()->GetEditWindowForActiveOLEObj();
+                    if (pViewShellWindow && pViewShellWindow->IsAncestorOf(*pWin))
+                    {
+                        Point aOffsetPx = pWin->GetOffsetPixelFrom(*pViewShellWindow);
+                        Point aLogicOffset = pWin->PixelToLogic(aOffsetPx);
+                        aSelection.Move(aLogicOffset.getX(), aLogicOffset.getY());
+                    }
+                }
+            }
+
+            // In case the map mode is in 100th MM, then need to convert the coordinates over to twips for LOK.
+            if (mpMarkedPV)
+            {
+                if (OutputDevice* pOutputDevice = mpMarkedPV->GetView().GetFirstOutputDevice())
+                {
+                    if (pOutputDevice->GetMapMode().GetMapUnit() == MapUnit::Map100thMM)
+                        aSelection = OutputDevice::LogicToLogic(aSelection, MapMode(MapUnit::Map100thMM), MapMode(MapUnit::MapTwip));
+                }
+            }
+
+            sSelection = aSelection.toString();
+        }
+
+        if(SfxViewShell* pViewShell = GetSfxViewShell())
+            SfxLokHelper::notifyInvalidation(pViewShell, sSelection);
+    }
+}
+
+
+bool SdrMarkView::IsAction() const
+{
+    return SdrSnapView::IsAction() || IsMarkObj() || IsMarkPoints() || IsMarkGluePoints();
+}
+
+void SdrMarkView::MovAction(const Point& rPnt)
+{
+    SdrSnapView::MovAction(rPnt);
+
+    if(IsMarkObj())
+    {
+        MovMarkObj(rPnt);
+    }
+    else if(IsMarkPoints())
+    {
+        MovMarkPoints(rPnt);
+    }
+    else if(IsMarkGluePoints())
+    {
+        MovMarkGluePoints(rPnt);
+    }
+}
+
+void SdrMarkView::EndAction()
+{
+    if(IsMarkObj())
+    {
+        EndMarkObj();
+    }
+    else if(IsMarkPoints())
+    {
+        EndMarkPoints();
+    }
+    else if(IsMarkGluePoints())
+    {
+        EndMarkGluePoints();
+    }
+
+    SdrSnapView::EndAction();
+}
+
+void SdrMarkView::BckAction()
+{
+    SdrSnapView::BckAction();
+    BrkMarkObj();
+    BrkMarkPoints();
+    BrkMarkGluePoints();
+}
+
+void SdrMarkView::BrkAction()
+{
+    SdrSnapView::BrkAction();
+    BrkMarkObj();
+    BrkMarkPoints();
+    BrkMarkGluePoints();
+}
+
+void SdrMarkView::TakeActionRect(tools::Rectangle& rRect) const
+{
+    if(IsMarkObj() || IsMarkPoints() || IsMarkGluePoints())
+    {
+        rRect = tools::Rectangle(maDragStat.GetStart(), maDragStat.GetNow());
+    }
+    else
+    {
+        SdrSnapView::TakeActionRect(rRect);
+    }
+}
+
+
+void SdrMarkView::ClearPageView()
+{
+    UnmarkAllObj();
+    SdrSnapView::ClearPageView();
+}
+
+void SdrMarkView::HideSdrPage()
+{
+    bool bMrkChg(false);
+
+    SdrPageView* pPageView = GetSdrPageView();
+    if (pPageView)
+    {
+        // break all creation actions when hiding page (#75081#)
+        BrkAction();
+
+        // Discard all selections on this page
+        bMrkChg = GetMarkedObjectListWriteAccess().DeletePageView(*pPageView);
+    }
+
+    SdrSnapView::HideSdrPage();
+
+    if(bMrkChg)
+    {
+        MarkListHasChanged();
+        AdjustMarkHdl();
+    }
+}
+
+
+void SdrMarkView::BegMarkObj(const Point& rPnt, bool bUnmark)
+{
+    BrkAction();
+
+    DBG_ASSERT(nullptr == mpMarkObjOverlay, "SdrMarkView::BegMarkObj: There exists a mpMarkObjOverlay (!)");
+
+    basegfx::B2DPoint aStartPos(rPnt.X(), rPnt.Y());
+    mpMarkObjOverlay = new ImplMarkingOverlay(*this, aStartPos, bUnmark);
+
+    maDragStat.Reset(rPnt);
+    maDragStat.NextPoint();
+    maDragStat.SetMinMove(mnMinMovLog);
+}
+
+void SdrMarkView::MovMarkObj(const Point& rPnt)
+{
+    if(IsMarkObj() && maDragStat.CheckMinMoved(rPnt))
+    {
+        maDragStat.NextMove(rPnt);
+        DBG_ASSERT(mpMarkObjOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        basegfx::B2DPoint aNewPos(rPnt.X(), rPnt.Y());
+        mpMarkObjOverlay->SetSecondPosition(aNewPos);
+    }
+}
+
+bool SdrMarkView::EndMarkObj()
+{
+    bool bRetval(false);
+
+    if(IsMarkObj())
+    {
+        if(maDragStat.IsMinMoved())
+        {
+            tools::Rectangle aRect(maDragStat.GetStart(), maDragStat.GetNow());
+            aRect.Justify();
+            MarkObj(aRect, mpMarkObjOverlay->IsUnmarking());
+            bRetval = true;
+        }
+
+        // cleanup
+        BrkMarkObj();
+    }
+
+    return bRetval;
+}
+
+void SdrMarkView::BrkMarkObj()
+{
+    if(IsMarkObj())
+    {
+        DBG_ASSERT(mpMarkObjOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        delete mpMarkObjOverlay;
+        mpMarkObjOverlay = nullptr;
+    }
+}
+
+
+bool SdrMarkView::BegMarkPoints(const Point& rPnt, bool bUnmark)
+{
+    if(HasMarkablePoints())
+    {
+        BrkAction();
+
+        DBG_ASSERT(nullptr == mpMarkPointsOverlay, "SdrMarkView::BegMarkObj: There exists a mpMarkPointsOverlay (!)");
+        basegfx::B2DPoint aStartPos(rPnt.X(), rPnt.Y());
+        mpMarkPointsOverlay = new ImplMarkingOverlay(*this, aStartPos, bUnmark);
+
+        maDragStat.Reset(rPnt);
+        maDragStat.NextPoint();
+        maDragStat.SetMinMove(mnMinMovLog);
+
+        return true;
+    }
+
+    return false;
+}
+
+void SdrMarkView::MovMarkPoints(const Point& rPnt)
+{
+    if(IsMarkPoints() && maDragStat.CheckMinMoved(rPnt))
+    {
+        maDragStat.NextMove(rPnt);
+
+        DBG_ASSERT(mpMarkPointsOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        basegfx::B2DPoint aNewPos(rPnt.X(), rPnt.Y());
+        mpMarkPointsOverlay->SetSecondPosition(aNewPos);
+    }
+}
+
+bool SdrMarkView::EndMarkPoints()
+{
+    bool bRetval(false);
+
+    if(IsMarkPoints())
+    {
+        if(maDragStat.IsMinMoved())
+        {
+            tools::Rectangle aRect(maDragStat.GetStart(), maDragStat.GetNow());
+            aRect.Justify();
+            MarkPoints(&aRect, mpMarkPointsOverlay->IsUnmarking());
+
+            bRetval = true;
+        }
+
+        // cleanup
+        BrkMarkPoints();
+    }
+
+    return bRetval;
+}
+
+void SdrMarkView::BrkMarkPoints()
+{
+    if(IsMarkPoints())
+    {
+        DBG_ASSERT(mpMarkPointsOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        delete mpMarkPointsOverlay;
+        mpMarkPointsOverlay = nullptr;
+    }
+}
+
+
+bool SdrMarkView::BegMarkGluePoints(const Point& rPnt, bool bUnmark)
+{
+    if(HasMarkableGluePoints())
+    {
+        BrkAction();
+
+        DBG_ASSERT(nullptr == mpMarkGluePointsOverlay, "SdrMarkView::BegMarkObj: There exists a mpMarkGluePointsOverlay (!)");
+
+        basegfx::B2DPoint aStartPos(rPnt.X(), rPnt.Y());
+        mpMarkGluePointsOverlay = new ImplMarkingOverlay(*this, aStartPos, bUnmark);
+        maDragStat.Reset(rPnt);
+        maDragStat.NextPoint();
+        maDragStat.SetMinMove(mnMinMovLog);
+
+        return true;
+    }
+
+    return false;
+}
+
+void SdrMarkView::MovMarkGluePoints(const Point& rPnt)
+{
+    if(IsMarkGluePoints() && maDragStat.CheckMinMoved(rPnt))
+    {
+        maDragStat.NextMove(rPnt);
+
+        DBG_ASSERT(mpMarkGluePointsOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        basegfx::B2DPoint aNewPos(rPnt.X(), rPnt.Y());
+        mpMarkGluePointsOverlay->SetSecondPosition(aNewPos);
+    }
+}
+
+void SdrMarkView::EndMarkGluePoints()
+{
+    if(IsMarkGluePoints())
+    {
+        if(maDragStat.IsMinMoved())
+        {
+            tools::Rectangle aRect(maDragStat.GetStart(),maDragStat.GetNow());
+            aRect.Justify();
+            MarkGluePoints(&aRect, mpMarkGluePointsOverlay->IsUnmarking());
+        }
+
+        // cleanup
+        BrkMarkGluePoints();
+    }
+}
+
+void SdrMarkView::BrkMarkGluePoints()
+{
+    if(IsMarkGluePoints())
+    {
+        DBG_ASSERT(mpMarkGluePointsOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        delete mpMarkGluePointsOverlay;
+        mpMarkGluePointsOverlay = nullptr;
+    }
+}
+
+bool SdrMarkView::MarkableObjectsExceed( int n ) const
+{
+    SdrPageView* pPV = GetSdrPageView();
+    if (!pPV)
+        return false;
+
+    SdrObjList* pOL=pPV->GetObjList();
+    const size_t nObjCount = pOL->GetObjCount();
+    for (size_t nObjNum=0; nObjNum<nObjCount; ++nObjNum) {
+        SdrObject* pObj=pOL->GetObj(nObjNum);
+        if (IsObjMarkable(pObj,pPV) && --n<0)
+            return true;
+    }
+
+    return false;
+}
+
+void SdrMarkView::hideMarkHandles()
+{
+    if(!mbMarkHandlesHidden)
+    {
+        mbMarkHandlesHidden = true;
+        AdjustMarkHdl();
+    }
+}
+
+void SdrMarkView::showMarkHandles()
+{
+    if(mbMarkHandlesHidden)
+    {
+        mbMarkHandlesHidden = false;
+        AdjustMarkHdl();
+    }
+}
+
+bool SdrMarkView::ImpIsFrameHandles() const
+{
+    const size_t nMarkCount=GetMarkedObjectCount();
+    bool bFrmHdl=nMarkCount>static_cast<size_t>(mnFrameHandlesLimit) || mbForceFrameHandles;
+    bool bStdDrag=meDragMode==SdrDragMode::Move;
+    if (nMarkCount==1 && bStdDrag && bFrmHdl)
+    {
+        const SdrObject* pObj=GetMarkedObjectByIndex(0);
+        if (pObj->GetObjInventor()==SdrInventor::Default)
+        {
+            sal_uInt16 nIdent=pObj->GetObjIdentifier();
+            if (nIdent==OBJ_LINE || nIdent==OBJ_EDGE || nIdent==OBJ_CAPTION || nIdent==OBJ_MEASURE || nIdent==OBJ_CUSTOMSHAPE || nIdent==OBJ_TABLE )
+            {
+                bFrmHdl=false;
+            }
+        }
+    }
+    if (!bStdDrag && !bFrmHdl) {
+        // all other drag modes only with FrameHandles
+        bFrmHdl=true;
+        if (meDragMode==SdrDragMode::Rotate) {
+            // when rotating, use ObjOwn drag, if there's at least 1 PolyObj
+            for (size_t nMarkNum=0; nMarkNum<nMarkCount && bFrmHdl; ++nMarkNum) {
+                const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+                const SdrObject* pObj=pM->GetMarkedSdrObj();
+                bFrmHdl=!pObj->IsPolyObj();
+            }
+        }
+    }
+    if (!bFrmHdl) {
+        // FrameHandles, if at least 1 Obj can't do SpecialDrag
+        for (size_t nMarkNum=0; nMarkNum<nMarkCount && !bFrmHdl; ++nMarkNum) {
+            const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+            const SdrObject* pObj=pM->GetMarkedSdrObj();
+            bFrmHdl=!pObj->hasSpecialDrag();
+        }
+    }
+
+    // no FrameHdl for crop
+    if(bFrmHdl && SdrDragMode::Crop == meDragMode)
+    {
+        bFrmHdl = false;
+    }
+
+    return bFrmHdl;
+}
+
+namespace
+{
+OUString lcl_getDragMethodServiceName( const OUString& rCID )
+{
+    OUString aRet;
+
+    sal_Int32 nIndexStart = rCID.indexOf( "DragMethod=" );
+    if( nIndexStart != -1 )
+    {
+        nIndexStart = rCID.indexOf( '=', nIndexStart );
+        if( nIndexStart != -1 )
+        {
+            nIndexStart++;
+            sal_Int32 nNextSlash = rCID.indexOf( '/', nIndexStart );
+            if( nNextSlash != -1 )
+            {
+                sal_Int32 nIndexEnd = nNextSlash;
+                sal_Int32 nNextColon = rCID.indexOf( ':', nIndexStart );
+                if( nNextColon < nNextSlash )
+                    nIndexEnd = nNextColon;
+                aRet = rCID.copy(nIndexStart,nIndexEnd-nIndexStart);
+            }
+        }
+    }
+    return aRet;
+}
+
+OUString lcl_getDragParameterString( const OUString& rCID )
+{
+    OUString aRet;
+
+    sal_Int32 nIndexStart = rCID.indexOf( "DragParameter=" );
+    if( nIndexStart != -1 )
+    {
+        nIndexStart = rCID.indexOf( '=', nIndexStart );
+        if( nIndexStart != -1 )
+        {
+            nIndexStart++;
+            sal_Int32 nNextSlash = rCID.indexOf( '/', nIndexStart );
+            if( nNextSlash != -1 )
+            {
+                sal_Int32 nIndexEnd = nNextSlash;
+                sal_Int32 nNextColon = rCID.indexOf( ':', nIndexStart );
+                if( nNextColon < nNextSlash )
+                    nIndexEnd = nNextColon;
+                aRet = rCID.copy(nIndexStart,nIndexEnd-nIndexStart);
+            }
+        }
+    }
+    return aRet;
+}
+} // anonymous namespace
+
+void SdrMarkView::SetMarkHandlesForLOKit(tools::Rectangle const & rRect, SfxViewShell* pOtherShell)
+{
+    SfxViewShell* pViewShell = GetSfxViewShell();
+
+    tools::Rectangle aSelection(rRect);
+    bool bIsChart = false;
+
+    if (!rRect.IsEmpty())
+    {
+        sal_uInt32 nTotalPaintWindows = this->PaintWindowCount();
+        if (nTotalPaintWindows == 1)
+        {
+            const vcl::Window* pWin = dynamic_cast<const vcl::Window*>(this->GetFirstOutputDevice());
+            if (pWin && pWin->IsChart())
+            {
+                bIsChart = true;
+                const vcl::Window* pViewShellWindow = GetSfxViewShell()->GetEditWindowForActiveOLEObj();
+                if (pViewShellWindow && pViewShellWindow->IsAncestorOf(*pWin))
+                {
+                    Point aOffsetPx = pWin->GetOffsetPixelFrom(*pViewShellWindow);
+                    Point aLogicOffset = pWin->PixelToLogic(aOffsetPx);
+                    aSelection.Move(aLogicOffset.getX(), aLogicOffset.getY());
+                }
+            }
+        }
+    }
+
+    if (!aSelection.IsEmpty())
+    {
+        // In case the map mode is in 100th MM, then need to convert the coordinates over to twips for LOK.
+        if (mpMarkedPV)
+        {
+            if (OutputDevice* pOutputDevice = mpMarkedPV->GetView().GetFirstOutputDevice())
+            {
+                if (pOutputDevice->GetMapMode().GetMapUnit() == MapUnit::Map100thMM)
+                    aSelection = OutputDevice::LogicToLogic(aSelection, MapMode(MapUnit::Map100thMM), MapMode(MapUnit::MapTwip));
+            }
+        }
+
+        // hide the text selection too
+        pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_TEXT_SELECTION, "");
+    }
+
+    {
+        OString sSelectionText;
+        boost::property_tree::ptree aTableJsonTree;
+        bool bTableSelection = false;
+
+        if (mpMarkedObj && mpMarkedObj->GetObjIdentifier() == OBJ_TABLE)
+        {
+            auto& rTableObject = dynamic_cast<sdr::table::SdrTableObj&>(*mpMarkedObj);
+            bTableSelection = rTableObject.createTableEdgesJson(aTableJsonTree);
+        }
+        if (GetMarkedObjectCount())
+        {
+            SdrMark* pM = GetSdrMarkByIndex(0);
+            SdrObject* pO = pM->GetMarkedSdrObj();
+            long nRotAngle = pO->GetRotateAngle();
+            // true if we are dealing with a RotGrfFlyFrame
+            // (SwVirtFlyDrawObj with a SwGrfNode)
+            bool bWriterGraphic = pO->HasLimitedRotation();
+
+            if (bWriterGraphic)
+            {
+                nRotAngle *= 10;
+            }
+
+            OStringBuffer aExtraInfo;
+
+            aExtraInfo.append("{\"id\":\"");
+            aExtraInfo.append(OString::number(reinterpret_cast<sal_IntPtr>(pO)));
+            aExtraInfo.append("\",\"type\":");
+            aExtraInfo.append(OString::number(pO->GetObjIdentifier()));
+
+            if (bWriterGraphic)
+            {
+                aExtraInfo.append(", \"isWriterGraphic\": true");
+            }
+            else if (bIsChart)
+            {
+                LokChartHelper aChartHelper(pViewShell);
+                css::uno::Reference<css::frame::XController>& xChartController = aChartHelper.GetXController();
+                css::uno::Reference<css::view::XSelectionSupplier> xSelectionSupplier( xChartController, uno::UNO_QUERY);
+                if (xSelectionSupplier.is())
+                {
+                    uno::Any aSel = xSelectionSupplier->getSelection();
+                    OUString aValue;
+                    if (aSel >>= aValue)
+                    {
+                        OString aObjectCID(aValue.getStr(), aValue.getLength(), osl_getThreadTextEncoding());
+                        const std::vector<OString> aProps{"Draggable", "Resizable", "Rotatable"};
+                        for (const auto& rProp: aProps)
+                        {
+                            sal_Int32 nPos = aObjectCID.indexOf(rProp);
+                            if (nPos == -1) continue;
+                            nPos += rProp.getLength() + 1; // '='
+                            if (aExtraInfo.getLength() > 2) // != "{ "
+                                aExtraInfo.append(", ");
+                            aExtraInfo.append("\"is");
+                            aExtraInfo.append(rProp);
+                            aExtraInfo.append("\": ");
+                            aExtraInfo.append(OString::boolean(aObjectCID[nPos] == '1'));
+                        }
+
+                        OUString sDragMethod = lcl_getDragMethodServiceName(aValue);
+                        if (sDragMethod == "PieSegmentDragging")
+                        {
+                            // old initial offset inside the CID returned by xSelectionSupplier->getSelection()
+                            // after a pie segment dragging; using SdrObject::GetName for getting a CID with the updated offset
+                            aValue = pO->GetName();
+                            OUString sDragParameters = lcl_getDragParameterString(aValue);
+                            if (!sDragParameters.isEmpty())
+                            {
+                                aExtraInfo.append(", \"dragInfo\": { ");
+                                aExtraInfo.append("\"dragMethod\": \"");
+                                aExtraInfo.append(sDragMethod.toUtf8());
+                                aExtraInfo.append("\"");
+
+                                OUString sParam;
+                                sal_Int32 nStartIndex = 0;
+                                std::array<int, 5> aDragParameters;
+                                for (auto& rParam : aDragParameters)
+                                {
+                                    sParam = sDragParameters.getToken(0, ',', nStartIndex);
+                                    if (sParam.isEmpty())
+                                        break;
+                                    rParam = sParam.toInt32();
+                                }
+
+                                // initial offset in %
+                                if (aDragParameters[0] < 0)
+                                    aDragParameters[0] = 0;
+                                else if (aDragParameters[0] > 100)
+                                    aDragParameters[0] = 100;
+
+                                aExtraInfo.append(", \"initialOffset\": ");
+                                aExtraInfo.append(OString::number(aDragParameters[0]));
+
+                                // drag direction constraint
+                                Point aMinPos(aDragParameters[1], aDragParameters[2]);
+                                Point aMaxPos(aDragParameters[3], aDragParameters[4]);
+                                Point aDragDirection = aMaxPos - aMinPos;
+                                aDragDirection = OutputDevice::LogicToLogic(aDragDirection, MapMode(MapUnit::Map100thMM), MapMode(MapUnit::MapTwip));
+
+                                aExtraInfo.append(", \"dragDirection\": [");
+                                aExtraInfo.append(aDragDirection.toString());
+                                aExtraInfo.append("]");
+
+                                // polygon approximating the pie segment or donut segment
+                                if (pO->GetObjIdentifier() == OBJ_PATHFILL)
+                                {
+                                    const basegfx::B2DPolyPolygon aPolyPolygon(pO->TakeXorPoly());
+                                    if (aPolyPolygon.count() == 1)
+                                    {
+                                        const basegfx::B2DPolygon aPolygon = aPolyPolygon.getB2DPolygon(0);
+                                        if (sal_uInt32 nPolySize = aPolygon.count())
+                                        {
+                                            const vcl::Window* pWin = dynamic_cast<const vcl::Window*>(this->GetFirstOutputDevice());
+                                            const vcl::Window* pViewShellWindow = pViewShell->GetEditWindowForActiveOLEObj();
+                                            if (pWin && pViewShellWindow && pViewShellWindow->IsAncestorOf(*pWin))
+                                            {
+                                                // in the following code escaping sequences used inside raw literal strings
+                                                // are for making them understandable by the JSON parser
+
+                                                Point aOffsetPx = pWin->GetOffsetPixelFrom(*pViewShellWindow);
+                                                Point aLogicOffset = pWin->PixelToLogic(aOffsetPx);
+                                                OString sPolygonElem("<polygon points=\\\"");
+                                                for (sal_uInt32 nIndex = 0; nIndex < nPolySize; ++nIndex)
+                                                {
+                                                    const basegfx::B2DPoint aB2Point = aPolygon.getB2DPoint(nIndex);
+                                                    Point aPoint(aB2Point.getX(), aB2Point.getY());
+                                                    aPoint.Move(aLogicOffset.getX(), aLogicOffset.getY());
+                                                    if (nIndex > 0)
+                                                        sPolygonElem += " ";
+                                                    sPolygonElem += aPoint.toString();
+                                                }
+                                                sPolygonElem += R"elem(\" style=\"stroke: none; fill: rgb(114,159,207); fill-opacity: 0.8\"/>)elem";
+
+                                                aSelection = OutputDevice::LogicToLogic(aSelection, MapMode(MapUnit::MapTwip), MapMode(MapUnit::Map100thMM));
+
+                                                OString sSVGElem = R"elem(<svg version=\"1.2\" width=\")elem" +
+                                                    OString::number(aSelection.GetWidth() / 100.0) +
+                                                    R"elem(mm\" height=\")elem" +
+                                                    OString::number(aSelection.GetHeight() / 100.0) +
+                                                    R"elem(mm\" viewBox=\")elem" +
+                                                    aSelection.toString() +
+                                                    R"elem(\" preserveAspectRatio=\"xMidYMid\" xmlns=\"http://www.w3.org/2000/svg\">)elem";
+
+                                                aExtraInfo.append(", \"svg\": \"");
+                                                aExtraInfo.append(sSVGElem);
+                                                aExtraInfo.append("\\n  ");
+                                                aExtraInfo.append(sPolygonElem);
+                                                aExtraInfo.append("\\n</svg>");
+                                                aExtraInfo.append("\""); // svg
+                                            }
+                                        }
+                                    }
+                                }
+                                aExtraInfo.append("}"); // dragInfo
+                            }
+                        }
+                    }
+                }
+            }
+            aExtraInfo.append("}");
+
+            sSelectionText = aSelection.toString() +
+                ", " + OString::number(nRotAngle);
+            if (!aExtraInfo.isEmpty())
+            {
+                sSelectionText += ", " + aExtraInfo.makeStringAndClear();
+            }
+        }
+
+        if (sSelectionText.isEmpty())
+            sSelectionText = "EMPTY";
+
+        if (bTableSelection)
+        {
+            boost::property_tree::ptree aTableRectangle;
+            aTableRectangle.put("x", aSelection.Left());
+            aTableRectangle.put("y", aSelection.Top());
+            aTableRectangle.put("width", aSelection.GetWidth());
+            aTableRectangle.put("height", aSelection.GetHeight());
+            aTableJsonTree.push_back(std::make_pair("rectangle", aTableRectangle));
+
+            std::stringstream aStream;
+            boost::property_tree::write_json(aStream, aTableJsonTree);
+            pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_TABLE_SELECTED, aStream.str().c_str());
+        }
+        else
+        {
+            pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_TABLE_SELECTED, "{}");
+        }
+
+        if (pOtherShell)
+        {
+            // Another shell wants to know about our existing
+            // selection.
+            if (pViewShell != pOtherShell)
+                SfxLokHelper::notifyOtherView(pViewShell, pOtherShell, LOK_CALLBACK_GRAPHIC_VIEW_SELECTION, "selection", sSelectionText);
+        }
+        else
+        {
+            // We have a new selection, so both pViewShell and the
+            // other views want to know about it.
+            pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_GRAPHIC_SELECTION, sSelectionText.getStr());
+            SfxLokHelper::notifyOtherViews(pViewShell, LOK_CALLBACK_GRAPHIC_VIEW_SELECTION, "selection", sSelectionText);
+        }
+    }
+}
+
+void SdrMarkView::SetMarkHandles(SfxViewShell* pOtherShell)
+{
+    // remember old focus handle values to search for it again
+    const SdrHdl* pSaveOldFocusHdl = maHdlList.GetFocusHdl();
+    bool bSaveOldFocus(false);
+    sal_uInt32 nSavePolyNum(0), nSavePointNum(0);
+    SdrHdlKind eSaveKind(SdrHdlKind::Move);
+    SdrObject* pSaveObj = nullptr;
+
+    if(pSaveOldFocusHdl
+        && pSaveOldFocusHdl->GetObj()
+        && dynamic_cast<const SdrPathObj*>(pSaveOldFocusHdl->GetObj()) != nullptr
+        && (pSaveOldFocusHdl->GetKind() == SdrHdlKind::Poly || pSaveOldFocusHdl->GetKind() == SdrHdlKind::BezierWeight))
+    {
+        bSaveOldFocus = true;
+        nSavePolyNum = pSaveOldFocusHdl->GetPolyNum();
+        nSavePointNum = pSaveOldFocusHdl->GetPointNum();
+        pSaveObj = pSaveOldFocusHdl->GetObj();
+        eSaveKind = pSaveOldFocusHdl->GetKind();
+    }
+
+    // delete/clear all handles. This will always be done, even with areMarkHandlesHidden()
+    maHdlList.Clear();
+    maHdlList.SetRotateShear(meDragMode==SdrDragMode::Rotate);
+    maHdlList.SetDistortShear(meDragMode==SdrDragMode::Shear);
+    mpMarkedObj=nullptr;
+    mpMarkedPV=nullptr;
+
+    // are handles enabled at all? Create only then
+    if(areMarkHandlesHidden())
+        return;
+
+    // There can be multiple mark views, but we're only interested in the one that has a window associated.
+    const bool bTiledRendering = comphelper::LibreOfficeKit::isActive() && GetFirstOutputDevice() && GetFirstOutputDevice()->GetOutDevType() == OUTDEV_WINDOW;
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    bool bStdDrag=meDragMode==SdrDragMode::Move;
+    bool bSingleTextObjMark=false;
+    bool bLimitedRotation(false);
+
+    if (nMarkCount==1)
+    {
+        mpMarkedObj=GetMarkedObjectByIndex(0);
+
+        if(nullptr != mpMarkedObj)
+        {
+            bSingleTextObjMark =
+                dynamic_cast<const SdrTextObj*>( mpMarkedObj) !=  nullptr &&
+                static_cast<SdrTextObj*>(mpMarkedObj)->IsTextFrame();
+
+            // RotGrfFlyFrame: we may have limited rotation
+            bLimitedRotation = SdrDragMode::Rotate == meDragMode && mpMarkedObj->HasLimitedRotation();
+        }
+    }
+
+    bool bFrmHdl=ImpIsFrameHandles();
+
+    if (nMarkCount>0)
+    {
+        mpMarkedPV=GetSdrPageViewOfMarkedByIndex(0);
+
+        for (size_t nMarkNum=0; nMarkNum<nMarkCount && (mpMarkedPV!=nullptr || !bFrmHdl); ++nMarkNum)
+        {
+            const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+
+            if (mpMarkedPV!=pM->GetPageView())
+            {
+                mpMarkedPV=nullptr;
+            }
+        }
+    }
+
+    SfxViewShell* pViewShell = GetSfxViewShell();
+
+    // check if text edit or ole is active and handles need to be suppressed. This may be the case
+    // when a single object is selected
+    // Using a strict return statement is okay here; no handles means *no* handles.
+    if(mpMarkedObj)
+    {
+        // formerly #i33755#: If TextEdit is active the EditEngine will directly paint
+        // to the window, so suppress Overlay and handles completely; a text frame for
+        // the active text edit will be painted by the repaint mechanism in
+        // SdrObjEditView::ImpPaintOutlinerView in this case. This needs to be reworked
+        // in the future
+        // Also formerly #122142#: Pretty much the same for SdrCaptionObj's in calc.
+        if(static_cast<SdrView*>(this)->IsTextEdit())
+        {
+            const SdrTextObj* pSdrTextObj = dynamic_cast< const SdrTextObj* >(mpMarkedObj);
+
+            if (pSdrTextObj && pSdrTextObj->IsInEditMode())
+            {
+                if (!bTiledRendering)
+                    return;
+            }
+        }
+
+        // formerly #i118524#: if inplace activated OLE is selected, suppress handles
+        const SdrOle2Obj* pSdrOle2Obj = dynamic_cast< const SdrOle2Obj* >(mpMarkedObj);
+
+        if(pSdrOle2Obj && (pSdrOle2Obj->isInplaceActive() || pSdrOle2Obj->isUiActive()))
+        {
+            return;
+        }
+    }
+
+    tools::Rectangle aRect(GetMarkedObjRect());
+
+    if (bTiledRendering && pViewShell)
+    {
+        SetMarkHandlesForLOKit(aRect, pOtherShell);
+    }
+
+    if (bFrmHdl)
+    {
+        if(!aRect.IsEmpty())
+        {
+            // otherwise nothing is found
+            const size_t nSiz0(maHdlList.GetHdlCount());
+
+            if( bSingleTextObjMark )
+            {
+                mpMarkedObj->AddToHdlList(maHdlList);
+            }
+            else
+            {
+                const bool bWdt0(aRect.Left() == aRect.Right());
+                const bool bHgt0(aRect.Top() == aRect.Bottom());
+
+                if (bWdt0 && bHgt0)
+                {
+                    maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.TopLeft(), SdrHdlKind::UpperLeft));
+                }
+                else if (!bStdDrag && (bWdt0 || bHgt0))
+                {
+                    maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.TopLeft(), SdrHdlKind::UpperLeft));
+                    maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.BottomRight(), SdrHdlKind::LowerRight));
+                }
+                else
+                {
+                    if (!bWdt0 && !bHgt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.TopLeft(), SdrHdlKind::UpperLeft));
+                    }
+
+                    if (!bLimitedRotation && !bHgt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.TopCenter(), SdrHdlKind::Upper));
+                    }
+
+                    if (!bWdt0 && !bHgt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.TopRight(), SdrHdlKind::UpperRight));
+                    }
+
+                    if (!bLimitedRotation && !bWdt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.LeftCenter(), SdrHdlKind::Left ));
+                    }
+
+                    if (!bLimitedRotation && !bWdt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.RightCenter(), SdrHdlKind::Right));
+                    }
+
+                    if (!bWdt0 && !bHgt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.BottomLeft(), SdrHdlKind::LowerLeft));
+                    }
+
+                    if (!bLimitedRotation && !bHgt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.BottomCenter(), SdrHdlKind::Lower));
+                    }
+
+                    if (!bWdt0 && !bHgt0)
+                    {
+                        maHdlList.AddHdl(std::make_unique<SdrHdl>(aRect.BottomRight(), SdrHdlKind::LowerRight));
+                    }
+                }
+            }
+
+            const size_t nSiz1(maHdlList.GetHdlCount());
+
+            // moved setting the missing parameters at SdrHdl here from the
+            // single loop above (bSingleTextObjMark), this was missing all
+            // the time. Setting SdrObject is now required to correctly get
+            // the View-Dependent evtl. GridOffset adapted
+            for (size_t i=nSiz0; i<nSiz1; ++i)
+            {
+                SdrHdl* pHdl=maHdlList.GetHdl(i);
+                pHdl->SetObj(mpMarkedObj);
+                pHdl->SetPageView(mpMarkedPV);
+                pHdl->SetObjHdlNum(sal_uInt16(i-nSiz0));
+            }
+        }
+    }
+    else
+    {
+        bool bDone(false);
+
+        // moved crop handling to non-frame part and the handle creation to SdrGrafObj
+        if(1 == nMarkCount && mpMarkedObj && SdrDragMode::Crop == meDragMode)
+        {
+            // Default addCropHandles from SdrObject does nothing. When pMarkedObj is SdrGrafObj, previous
+            // behaviour occurs (code in svx/source/svdraw/svdograf.cxx). When pMarkedObj is SwVirtFlyDrawObj
+            // writer takes the responsibility of adding handles (code in sw/source/core/draw/dflyobj.cxx)
+            const size_t nSiz0(maHdlList.GetHdlCount());
+            mpMarkedObj->addCropHandles(maHdlList);
+            const size_t nSiz1(maHdlList.GetHdlCount());
+
+            // Was missing: Set infos at SdrCropHdl
+            for (size_t i=nSiz0; i<nSiz1; ++i)
+            {
+                SdrHdl* pHdl=maHdlList.GetHdl(i);
+                pHdl->SetObj(mpMarkedObj);
+                pHdl->SetPageView(mpMarkedPV);
+                pHdl->SetObjHdlNum(sal_uInt16(i-nSiz0));
+            }
+
+            bDone = true;
+        }
+
+        if(!bDone)
+        {
+            for (size_t nMarkNum=0; nMarkNum<nMarkCount; ++nMarkNum)
+            {
+                const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+                SdrObject* pObj=pM->GetMarkedSdrObj();
+                SdrPageView* pPV=pM->GetPageView();
+                const size_t nSiz0=maHdlList.GetHdlCount();
+                pObj->AddToHdlList(maHdlList);
+                const size_t nSiz1=maHdlList.GetHdlCount();
+                bool bPoly=pObj->IsPolyObj();
+                const SdrUShortCont& rMrkPnts = pM->GetMarkedPoints();
+                for (size_t i=nSiz0; i<nSiz1; ++i)
+                {
+                    SdrHdl* pHdl=maHdlList.GetHdl(i);
+                    pHdl->SetObj(pObj);
+                    pHdl->SetPageView(pPV);
+                    pHdl->SetObjHdlNum(sal_uInt16(i-nSiz0));
+
+                    if (bPoly)
+                    {
+                        bool bSelected= rMrkPnts.find( sal_uInt16(i-nSiz0) ) != rMrkPnts.end();
+                        pHdl->SetSelected(bSelected);
+                        if (mbPlusHdlAlways || bSelected)
+                        {
+                            SdrHdlList plusList(nullptr);
+                            pObj->AddToPlusHdlList(plusList, *pHdl);
+                            sal_uInt32 nPlusHdlCnt=plusList.GetHdlCount();
+                            for (sal_uInt32 nPlusNum=0; nPlusNum<nPlusHdlCnt; nPlusNum++)
+                            {
+                                SdrHdl* pPlusHdl=plusList.GetHdl(nPlusNum);
+                                pPlusHdl->SetObj(pObj);
+                                pPlusHdl->SetPageView(pPV);
+                                pPlusHdl->SetPlusHdl(true);
+                            }
+                            plusList.MoveTo(maHdlList);
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    // GluePoint handles
+    for (size_t nMarkNum=0; nMarkNum<nMarkCount; ++nMarkNum)
+    {
+        const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        const SdrGluePointList* pGPL=pObj->GetGluePointList();
+        if (!pGPL)
+            continue;
+
+        SdrPageView* pPV=pM->GetPageView();
+        const SdrUShortCont& rMrkGlue=pM->GetMarkedGluePoints();
+        for (sal_uInt16 nId : rMrkGlue)
+        {
+            //nNum changed to nNumGP because already used in for loop
+            sal_uInt16 nNumGP=pGPL->FindGluePoint(nId);
+            if (nNumGP!=SDRGLUEPOINT_NOTFOUND)
+            {
+                const SdrGluePoint& rGP=(*pGPL)[nNumGP];
+                Point aPos(rGP.GetAbsolutePos(*pObj));
+                std::unique_ptr<SdrHdl> pGlueHdl(new SdrHdl(aPos,SdrHdlKind::Glue));
+                pGlueHdl->SetObj(pObj);
+                pGlueHdl->SetPageView(pPV);
+                pGlueHdl->SetObjHdlNum(nId);
+                maHdlList.AddHdl(std::move(pGlueHdl));
+            }
+        }
+    }
+
+    // rotation point/axis of reflection
+    if(!bLimitedRotation)
+    {
+        AddDragModeHdl(meDragMode);
+    }
+
+    // sort handles
+    maHdlList.Sort();
+
+    // add custom handles (used by other apps, e.g. AnchorPos)
+    AddCustomHdl();
+
+    // try to restore focus handle index from remembered values
+    if(bSaveOldFocus)
+    {
+        for(size_t a = 0; a < maHdlList.GetHdlCount(); ++a)
+        {
+            SdrHdl* pCandidate = maHdlList.GetHdl(a);
+
+            if(pCandidate->GetObj()
+                && pCandidate->GetObj() == pSaveObj
+                && pCandidate->GetKind() == eSaveKind
+                && pCandidate->GetPolyNum() == nSavePolyNum
+                && pCandidate->GetPointNum() == nSavePointNum)
+            {
+                maHdlList.SetFocusHdl(pCandidate);
+                break;
+            }
+        }
+    }
+}
+
+void SdrMarkView::AddCustomHdl()
+{
+    // add custom handles (used by other apps, e.g. AnchorPos)
+}
+
+void SdrMarkView::SetDragMode(SdrDragMode eMode)
+{
+    SdrDragMode eMode0=meDragMode;
+    meDragMode=eMode;
+    if (meDragMode==SdrDragMode::Resize) meDragMode=SdrDragMode::Move;
+    if (meDragMode!=eMode0) {
+        ForceRefToMarked();
+        SetMarkHandles(nullptr);
+        {
+            if (AreObjectsMarked()) MarkListHasChanged();
+        }
+    }
+}
+
+void SdrMarkView::AddDragModeHdl(SdrDragMode eMode)
+{
+    switch(eMode)
+    {
+        case SdrDragMode::Rotate:
+        {
+            // add rotation center
+            maHdlList.AddHdl(std::make_unique<SdrHdl>(maRef1, SdrHdlKind::Ref1));
+            break;
+        }
+        case SdrDragMode::Mirror:
+        {
+            // add axis of reflection
+            std::unique_ptr<SdrHdl> pHdl3(new SdrHdl(maRef2, SdrHdlKind::Ref2));
+            std::unique_ptr<SdrHdl> pHdl2(new SdrHdl(maRef1, SdrHdlKind::Ref1));
+            std::unique_ptr<SdrHdl> pHdl1(new SdrHdlLine(*pHdl2, *pHdl3, SdrHdlKind::MirrorAxis));
+
+            pHdl1->SetObjHdlNum(1); // for sorting
+            pHdl2->SetObjHdlNum(2); // for sorting
+            pHdl3->SetObjHdlNum(3); // for sorting
+
+            maHdlList.AddHdl(std::move(pHdl1)); // line comes first, so it is the last in HitTest
+            maHdlList.AddHdl(std::move(pHdl2));
+            maHdlList.AddHdl(std::move(pHdl3));
+
+            break;
+        }
+        case SdrDragMode::Transparence:
+        {
+            // add interactive transparency handle
+            const size_t nMarkCount = GetMarkedObjectCount();
+            if(nMarkCount == 1)
+            {
+                SdrObject* pObj = GetMarkedObjectByIndex(0);
+                SdrModel* pModel = GetModel();
+                const SfxItemSet& rSet = pObj->GetMergedItemSet();
+
+                if(SfxItemState::SET != rSet.GetItemState(XATTR_FILLFLOATTRANSPARENCE, false))
+                {
+                    // add this item, it's not yet there
+                    XFillFloatTransparenceItem aNewItem(rSet.Get(XATTR_FILLFLOATTRANSPARENCE));
+                    XGradient aGrad = aNewItem.GetGradientValue();
+
+                    aNewItem.SetEnabled(true);
+                    aGrad.SetStartIntens(100);
+                    aGrad.SetEndIntens(100);
+                    aNewItem.SetGradientValue(aGrad);
+
+                    // add undo to allow user to take back this step
+                    if( pModel->IsUndoEnabled() )
+                    {
+                        pModel->BegUndo(SvxResId(SIP_XA_FILLTRANSPARENCE));
+                        pModel->AddUndo(pModel->GetSdrUndoFactory().CreateUndoAttrObject(*pObj));
+                        pModel->EndUndo();
+                    }
+
+                    SfxItemSet aNewSet(pModel->GetItemPool());
+                    aNewSet.Put(aNewItem);
+                    pObj->SetMergedItemSetAndBroadcast(aNewSet);
+                }
+
+                // set values and transform to vector set
+                GradTransVector aGradTransVector;
+                GradTransGradient aGradTransGradient;
+
+                aGradTransGradient.aGradient = rSet.Get(XATTR_FILLFLOATTRANSPARENCE).GetGradientValue();
+                GradTransformer::GradToVec(aGradTransGradient, aGradTransVector, pObj);
+
+                // build handles
+                const Point aTmpPos1(basegfx::fround(aGradTransVector.maPositionA.getX()), basegfx::fround(aGradTransVector.maPositionA.getY()));
+                const Point aTmpPos2(basegfx::fround(aGradTransVector.maPositionB.getX()), basegfx::fround(aGradTransVector.maPositionB.getY()));
+                std::unique_ptr<SdrHdlColor> pColHdl1(new SdrHdlColor(aTmpPos1, aGradTransVector.aCol1, SDR_HANDLE_COLOR_SIZE_NORMAL, true));
+                std::unique_ptr<SdrHdlColor> pColHdl2(new SdrHdlColor(aTmpPos2, aGradTransVector.aCol2, SDR_HANDLE_COLOR_SIZE_NORMAL, true));
+                std::unique_ptr<SdrHdlGradient> pGradHdl(new SdrHdlGradient(aTmpPos1, aTmpPos2, false));
+                DBG_ASSERT(pColHdl1 && pColHdl2 && pGradHdl, "Could not get all necessary handles!");
+
+                // link them
+                pGradHdl->SetColorHandles(pColHdl1.get(), pColHdl2.get());
+                pGradHdl->SetObj(pObj);
+                pColHdl1->SetColorChangeHdl(LINK(pGradHdl.get(), SdrHdlGradient, ColorChangeHdl));
+                pColHdl2->SetColorChangeHdl(LINK(pGradHdl.get(), SdrHdlGradient, ColorChangeHdl));
+
+                // insert them
+                maHdlList.AddHdl(std::move(pColHdl1));
+                maHdlList.AddHdl(std::move(pColHdl2));
+                maHdlList.AddHdl(std::move(pGradHdl));
+            }
+            break;
+        }
+        case SdrDragMode::Gradient:
+        {
+            // add interactive gradient handle
+            const size_t nMarkCount = GetMarkedObjectCount();
+            if(nMarkCount == 1)
+            {
+                SdrObject* pObj = GetMarkedObjectByIndex(0);
+                const SfxItemSet& rSet = pObj->GetMergedItemSet();
+                drawing::FillStyle eFillStyle = rSet.Get(XATTR_FILLSTYLE).GetValue();
+
+                if(eFillStyle == drawing::FillStyle_GRADIENT)
+                {
+                    // set values and transform to vector set
+                    GradTransVector aGradTransVector;
+                    GradTransGradient aGradTransGradient;
+                    Size aHdlSize(15, 15);
+
+                    aGradTransGradient.aGradient = rSet.Get(XATTR_FILLGRADIENT).GetGradientValue();
+                    GradTransformer::GradToVec(aGradTransGradient, aGradTransVector, pObj);
+
+                    // build handles
+                    const Point aTmpPos1(basegfx::fround(aGradTransVector.maPositionA.getX()), basegfx::fround(aGradTransVector.maPositionA.getY()));
+                    const Point aTmpPos2(basegfx::fround(aGradTransVector.maPositionB.getX()), basegfx::fround(aGradTransVector.maPositionB.getY()));
+                    std::unique_ptr<SdrHdlColor> pColHdl1(new SdrHdlColor(aTmpPos1, aGradTransVector.aCol1, aHdlSize, false));
+                    std::unique_ptr<SdrHdlColor> pColHdl2(new SdrHdlColor(aTmpPos2, aGradTransVector.aCol2, aHdlSize, false));
+                    std::unique_ptr<SdrHdlGradient> pGradHdl(new SdrHdlGradient(aTmpPos1, aTmpPos2, true));
+                    DBG_ASSERT(pColHdl1 && pColHdl2 && pGradHdl, "Could not get all necessary handles!");
+
+                    // link them
+                    pGradHdl->SetColorHandles(pColHdl1.get(), pColHdl2.get());
+                    pGradHdl->SetObj(pObj);
+                    pColHdl1->SetColorChangeHdl(LINK(pGradHdl.get(), SdrHdlGradient, ColorChangeHdl));
+                    pColHdl2->SetColorChangeHdl(LINK(pGradHdl.get(), SdrHdlGradient, ColorChangeHdl));
+
+                    // insert them
+                    maHdlList.AddHdl(std::move(pColHdl1));
+                    maHdlList.AddHdl(std::move(pColHdl2));
+                    maHdlList.AddHdl(std::move(pGradHdl));
+                }
+            }
+            break;
+        }
+        case SdrDragMode::Crop:
+        {
+            // TODO
+            break;
+        }
+        default: break;
+    }
+}
+
+/** handle mouse over effects for handles */
+bool SdrMarkView::MouseMove(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    if(maHdlList.GetHdlCount())
+    {
+        SdrHdl* pMouseOverHdl = nullptr;
+        if( !rMEvt.IsLeaveWindow() && pWin )
+        {
+            Point aMDPos( pWin->PixelToLogic( rMEvt.GetPosPixel() ) );
+            pMouseOverHdl = PickHandle(aMDPos);
+        }
+
+        // notify last mouse over handle that he lost the mouse
+        const size_t nHdlCount = maHdlList.GetHdlCount();
+
+        for(size_t nHdl = 0; nHdl < nHdlCount; ++nHdl)
+        {
+            SdrHdl* pCurrentHdl = GetHdl(nHdl);
+            if( pCurrentHdl->mbMouseOver )
+            {
+                if( pCurrentHdl != pMouseOverHdl )
+                {
+                    pCurrentHdl->mbMouseOver = false;
+                    pCurrentHdl->onMouseLeave();
+                }
+                break;
+            }
+        }
+
+        // notify current mouse over handle
+        if( pMouseOverHdl )
+        {
+            pMouseOverHdl->mbMouseOver = true;
+            pMouseOverHdl->onMouseEnter(rMEvt);
+        }
+    }
+    return SdrSnapView::MouseMove(rMEvt, pWin);
+}
+
+bool SdrMarkView::RequestHelp(const HelpEvent& rHEvt)
+{
+    if (maHdlList.GetHdlCount())
+    {
+        const size_t nHdlCount = maHdlList.GetHdlCount();
+
+        for (size_t nHdl = 0; nHdl < nHdlCount; ++nHdl)
+        {
+            SdrHdl* pCurrentHdl = GetHdl(nHdl);
+            if (pCurrentHdl->mbMouseOver)
+            {
+                pCurrentHdl->onHelpRequest();
+                return true;
+            }
+        }
+    }
+    return SdrSnapView::RequestHelp(rHEvt);
+}
+
+void SdrMarkView::ForceRefToMarked()
+{
+    switch(meDragMode)
+    {
+        case SdrDragMode::Rotate:
+        {
+            tools::Rectangle aR(GetMarkedObjRect());
+            maRef1 = aR.Center();
+
+            break;
+        }
+
+        case SdrDragMode::Mirror:
+        {
+            // first calculate the length of the axis of reflection
+            long nOutMin=0;
+            long nOutMax=0;
+            long nMinLen=0;
+            long nObjDst=0;
+            long nOutHgt=0;
+            OutputDevice* pOut=GetFirstOutputDevice();
+            if (pOut!=nullptr) {
+                // minimum length: 50 pixels
+                nMinLen=pOut->PixelToLogic(Size(0,50)).Height();
+                // 20 pixels distance to the Obj for the reference point
+                nObjDst=pOut->PixelToLogic(Size(0,20)).Height();
+                // MinY/MaxY
+                // margin = minimum length = 10 pixels
+                long nDst=pOut->PixelToLogic(Size(0,10)).Height();
+                nOutMin=-pOut->GetMapMode().GetOrigin().Y();
+                nOutMax=pOut->GetOutputSize().Height()-1+nOutMin;
+                nOutMin+=nDst;
+                nOutMax-=nDst;
+                // absolute minimum length, however, is 10 pixels
+                if (nOutMax-nOutMin<nDst) {
+                    nOutMin+=nOutMax+1;
+                    nOutMin/=2;
+                    nOutMin-=(nDst+1)/2;
+                    nOutMax=nOutMin+nDst;
+                }
+                nOutHgt=nOutMax-nOutMin;
+                // otherwise minimum length = 1/4 OutHgt
+                long nTemp=nOutHgt/4;
+                if (nTemp>nMinLen) nMinLen=nTemp;
+            }
+
+            tools::Rectangle aR(GetMarkedObjBoundRect());
+            Point aCenter(aR.Center());
+            long nMarkHgt=aR.GetHeight()-1;
+            long nHgt=nMarkHgt+nObjDst*2;       // 20 pixels overlapping above and below
+            if (nHgt<nMinLen) nHgt=nMinLen;     // minimum length 50 pixels or 1/4 OutHgt, respectively
+
+            long nY1=aCenter.Y()-(nHgt+1)/2;
+            long nY2=nY1+nHgt;
+
+            if (pOut!=nullptr && nMinLen>nOutHgt) nMinLen=nOutHgt; // TODO: maybe shorten this a little
+
+            if (pOut!=nullptr) { // now move completely into the visible area
+                if (nY1<nOutMin) {
+                    nY1=nOutMin;
+                    if (nY2<nY1+nMinLen) nY2=nY1+nMinLen;
+                }
+                if (nY2>nOutMax) {
+                    nY2=nOutMax;
+                    if (nY1>nY2-nMinLen) nY1=nY2-nMinLen;
+                }
+            }
+
+            maRef1.setX(aCenter.X() );
+            maRef1.setY(nY1 );
+            maRef2.setX(aCenter.X() );
+            maRef2.setY(nY2 );
+
+            break;
+        }
+
+        case SdrDragMode::Transparence:
+        case SdrDragMode::Gradient:
+        case SdrDragMode::Crop:
+        {
+            tools::Rectangle aRect(GetMarkedObjBoundRect());
+            maRef1 = aRect.TopLeft();
+            maRef2 = aRect.BottomRight();
+            break;
+        }
+        default: break;
+    }
+}
+
+void SdrMarkView::SetRef1(const Point& rPt)
+{
+    if(meDragMode == SdrDragMode::Rotate || meDragMode == SdrDragMode::Mirror)
+    {
+        maRef1 = rPt;
+        SdrHdl* pH = maHdlList.GetHdl(SdrHdlKind::Ref1);
+        if(pH)
+            pH->SetPos(rPt);
+    }
+}
+
+void SdrMarkView::SetRef2(const Point& rPt)
+{
+    if(meDragMode == SdrDragMode::Mirror)
+    {
+        maRef2 = rPt;
+        SdrHdl* pH = maHdlList.GetHdl(SdrHdlKind::Ref2);
+        if(pH)
+            pH->SetPos(rPt);
+    }
+}
+
+SfxViewShell* SdrMarkView::GetSfxViewShell() const
+{
+    return SfxViewShell::Current();
+}
+
+void SdrMarkView::CheckMarked()
+{
+    for (size_t nm=GetMarkedObjectCount(); nm>0;) {
+        --nm;
+        SdrMark* pM = GetSdrMarkByIndex(nm);
+        SdrObject* pObj = pM->GetMarkedSdrObj();
+        SdrPageView* pPV = pM->GetPageView();
+        bool bRaus = !pObj || !pPV->IsObjMarkable(pObj);
+        if (bRaus)
+        {
+            GetMarkedObjectListWriteAccess().DeleteMark(nm);
+        }
+        else
+        {
+            if (!IsGluePointEditMode()) { // selected glue points only in GlueEditMode
+                SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+                rPts.clear();
+            }
+        }
+    }
+
+    // at least reset the remembered BoundRect to prevent handle
+    // generation if bForceFrameHandles is TRUE.
+    mbMarkedObjRectDirty = true;
+}
+
+void SdrMarkView::SetMarkRects()
+{
+    SdrPageView* pPV = GetSdrPageView();
+
+    if(pPV)
+    {
+        pPV->SetHasMarkedObj(GetMarkedObjectList().TakeSnapRect(pPV, pPV->MarkSnap()));
+        GetMarkedObjectList().TakeBoundRect(pPV, pPV->MarkBound());
+    }
+}
+
+void SdrMarkView::SetFrameHandles(bool bOn)
+{
+    if (bOn!=mbForceFrameHandles) {
+        bool bOld=ImpIsFrameHandles();
+        mbForceFrameHandles=bOn;
+        bool bNew=ImpIsFrameHandles();
+        if (bNew!=bOld) {
+            AdjustMarkHdl();
+            MarkListHasChanged();
+        }
+    }
+}
+
+void SdrMarkView::SetEditMode(SdrViewEditMode eMode)
+{
+    if (eMode!=meEditMode) {
+        bool bGlue0=meEditMode==SdrViewEditMode::GluePointEdit;
+        bool bEdge0=static_cast<SdrCreateView*>(this)->IsEdgeTool();
+        meEditMode0=meEditMode;
+        meEditMode=eMode;
+        bool bGlue1=meEditMode==SdrViewEditMode::GluePointEdit;
+        bool bEdge1=static_cast<SdrCreateView*>(this)->IsEdgeTool();
+        // avoid flickering when switching between GlueEdit and EdgeTool
+        if (bGlue1 && !bGlue0) ImpSetGlueVisible2(bGlue1);
+        if (bEdge1!=bEdge0) ImpSetGlueVisible3(bEdge1);
+        if (!bGlue1 && bGlue0) ImpSetGlueVisible2(bGlue1);
+        if (bGlue0 && !bGlue1) UnmarkAllGluePoints();
+    }
+}
+
+
+bool SdrMarkView::IsObjMarkable(SdrObject const * pObj, SdrPageView const * pPV) const
+{
+    if (pObj)
+    {
+        if (pObj->IsMarkProtect() ||
+            (!mbDesignMode && pObj->IsUnoObj()))
+        {
+            // object not selectable or
+            // SdrUnoObj not in DesignMode
+            return false;
+        }
+    }
+    return pPV==nullptr || pPV->IsObjMarkable(pObj);
+}
+
+bool SdrMarkView::IsMarkedObjHit(const Point& rPnt, short nTol) const
+{
+    bool bRet=false;
+    nTol=ImpGetHitTolLogic(nTol,nullptr);
+    for (size_t nm=0; nm<GetMarkedObjectCount() && !bRet; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        bRet = nullptr != CheckSingleSdrObjectHit(rPnt,sal_uInt16(nTol),pM->GetMarkedSdrObj(),pM->GetPageView(),SdrSearchOptions::NONE,nullptr);
+    }
+    return bRet;
+}
+
+SdrHdl* SdrMarkView::PickHandle(const Point& rPnt) const
+{
+    if (mbSomeObjChgdFlag) { // recalculate handles, if necessary
+        FlushComeBackTimer();
+    }
+    return maHdlList.IsHdlListHit(rPnt);
+}
+
+bool SdrMarkView::MarkObj(const Point& rPnt, short nTol, bool bToggle, bool bDeep)
+{
+    SdrPageView* pPV;
+    nTol=ImpGetHitTolLogic(nTol,nullptr);
+    SdrSearchOptions nOptions=SdrSearchOptions::PICKMARKABLE;
+    if (bDeep) nOptions=nOptions|SdrSearchOptions::DEEP;
+    SdrObject* pObj = PickObj(rPnt, static_cast<sal_uInt16>(nTol), pPV, nOptions);
+    if (pObj) {
+        bool bUnmark=bToggle && IsObjMarked(pObj);
+        MarkObj(pObj,pPV,bUnmark);
+    }
+    return pObj != nullptr;
+}
+
+bool SdrMarkView::MarkNextObj(bool bPrev)
+{
+    SdrPageView* pPageView = GetSdrPageView();
+
+    if(!pPageView)
+    {
+        return false;
+    }
+
+    SortMarkedObjects();
+    const size_t nMarkCount=GetMarkedObjectCount();
+    size_t nChgMarkNum = SAL_MAX_SIZE; // number of the MarkEntry we want to replace
+    size_t nSearchObjNum = bPrev ? 0 : SAL_MAX_SIZE;
+    if (nMarkCount!=0) {
+        nChgMarkNum=bPrev ? 0 : nMarkCount-1;
+        SdrMark* pM=GetSdrMarkByIndex(nChgMarkNum);
+        OSL_ASSERT(pM!=nullptr);
+        if (pM->GetMarkedSdrObj() != nullptr)
+            nSearchObjNum = pM->GetMarkedSdrObj()->GetNavigationPosition();
+    }
+
+    SdrObject* pMarkObj=nullptr;
+    SdrObjList* pSearchObjList=pPageView->GetObjList();
+    const size_t nObjCount = pSearchObjList->GetObjCount();
+    if (nObjCount!=0) {
+        if (nSearchObjNum>nObjCount) nSearchObjNum=nObjCount;
+        while (pMarkObj==nullptr && ((!bPrev && nSearchObjNum>0) || (bPrev && nSearchObjNum<nObjCount)))
+        {
+            if (!bPrev)
+                nSearchObjNum--;
+            SdrObject* pSearchObj = pSearchObjList->GetObjectForNavigationPosition(nSearchObjNum);
+            if (IsObjMarkable(pSearchObj,pPageView))
+            {
+                if (TryToFindMarkedObject(pSearchObj)==SAL_MAX_SIZE)
+                {
+                    pMarkObj=pSearchObj;
+                }
+            }
+            if (bPrev) nSearchObjNum++;
+        }
+    }
+
+    if(!pMarkObj)
+    {
+        return false;
+    }
+
+    if (nChgMarkNum!=SAL_MAX_SIZE)
+    {
+        GetMarkedObjectListWriteAccess().DeleteMark(nChgMarkNum);
+    }
+    MarkObj(pMarkObj,pPageView); // also calls MarkListHasChanged(), AdjustMarkHdl()
+    return true;
+}
+
+bool SdrMarkView::MarkNextObj(const Point& rPnt, short nTol, bool bPrev)
+{
+    SortMarkedObjects();
+    nTol=ImpGetHitTolLogic(nTol,nullptr);
+    SdrMark* pTopMarkHit=nullptr;
+    SdrMark* pBtmMarkHit=nullptr;
+    size_t nTopMarkHit=0;
+    size_t nBtmMarkHit=0;
+    // find topmost of the selected objects that is hit by rPnt
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=nMarkCount; nm>0 && pTopMarkHit==nullptr;) {
+        --nm;
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        if(CheckSingleSdrObjectHit(rPnt,sal_uInt16(nTol),pM->GetMarkedSdrObj(),pM->GetPageView(),SdrSearchOptions::NONE,nullptr))
+        {
+            pTopMarkHit=pM;
+            nTopMarkHit=nm;
+        }
+    }
+    // nothing found, in this case, just select an object
+    if (pTopMarkHit==nullptr) return MarkObj(rPnt,sal_uInt16(nTol));
+
+    SdrObject* pTopObjHit=pTopMarkHit->GetMarkedSdrObj();
+    SdrObjList* pObjList=pTopObjHit->getParentSdrObjListFromSdrObject();
+    SdrPageView* pPV=pTopMarkHit->GetPageView();
+    // find lowermost of the selected objects that is hit by rPnt
+    // and is placed on the same PageView as pTopMarkHit
+    for (size_t nm=0; nm<nMarkCount && pBtmMarkHit==nullptr; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrPageView* pPV2=pM->GetPageView();
+        if (pPV2==pPV && CheckSingleSdrObjectHit(rPnt,sal_uInt16(nTol),pM->GetMarkedSdrObj(),pPV2,SdrSearchOptions::NONE,nullptr))
+        {
+            pBtmMarkHit=pM;
+            nBtmMarkHit=nm;
+        }
+    }
+    if (pBtmMarkHit==nullptr) { pBtmMarkHit=pTopMarkHit; nBtmMarkHit=nTopMarkHit; }
+    SdrObject* pBtmObjHit=pBtmMarkHit->GetMarkedSdrObj();
+    const size_t nObjCount = pObjList->GetObjCount();
+
+    size_t nSearchBeg(0);
+    E3dScene* pScene(nullptr);
+    SdrObject* pObjHit(bPrev ? pBtmObjHit : pTopObjHit);
+    bool bRemap =
+        nullptr != dynamic_cast< const E3dCompoundObject* >(pObjHit);
+    if (bRemap)
+    {
+        pScene = dynamic_cast< E3dScene* >(pObjHit->getParentSdrObjectFromSdrObject());
+        bRemap = nullptr != pScene;
+    }
+
+    if(bPrev)
+    {
+        sal_uInt32 nOrdNumBtm(pBtmObjHit->GetOrdNum());
+
+        if(bRemap)
+        {
+            nOrdNumBtm = pScene->RemapOrdNum(nOrdNumBtm);
+        }
+
+        nSearchBeg = nOrdNumBtm + 1;
+    }
+    else
+    {
+        sal_uInt32 nOrdNumTop(pTopObjHit->GetOrdNum());
+
+        if(bRemap)
+        {
+            nOrdNumTop = pScene->RemapOrdNum(nOrdNumTop);
+        }
+
+        nSearchBeg = nOrdNumTop;
+    }
+
+    size_t no=nSearchBeg;
+    SdrObject* pFndObj=nullptr;
+    while (pFndObj==nullptr && ((!bPrev && no>0) || (bPrev && no<nObjCount))) {
+        if (!bPrev) no--;
+        SdrObject* pObj;
+
+        if(bRemap)
+        {
+            pObj = pObjList->GetObj(pScene->RemapOrdNum(no));
+        }
+        else
+        {
+            pObj = pObjList->GetObj(no);
+        }
+
+        if (CheckSingleSdrObjectHit(rPnt,sal_uInt16(nTol),pObj,pPV,SdrSearchOptions::TESTMARKABLE,nullptr))
+        {
+            if (TryToFindMarkedObject(pObj)==SAL_MAX_SIZE) {
+                pFndObj=pObj;
+            } else {
+                // TODO: for performance reasons set on to Top or Btm, if necessary
+            }
+        }
+        if (bPrev) no++;
+    }
+    if (pFndObj!=nullptr)
+    {
+        GetMarkedObjectListWriteAccess().DeleteMark(bPrev?nBtmMarkHit:nTopMarkHit);
+        GetMarkedObjectListWriteAccess().InsertEntry(SdrMark(pFndObj,pPV));
+        MarkListHasChanged();
+        AdjustMarkHdl();
+    }
+    return pFndObj!=nullptr;
+}
+
+void SdrMarkView::MarkObj(const tools::Rectangle& rRect, bool bUnmark)
+{
+    bool bFnd=false;
+    tools::Rectangle aR(rRect);
+    SdrObjList* pObjList;
+    BrkAction();
+    SdrPageView* pPV = GetSdrPageView();
+
+    if(pPV)
+    {
+        pObjList=pPV->GetObjList();
+        tools::Rectangle aFrm1(aR);
+        const size_t nObjCount = pObjList->GetObjCount();
+        for (size_t nO=0; nO<nObjCount; ++nO) {
+            SdrObject* pObj=pObjList->GetObj(nO);
+            tools::Rectangle aRect(pObj->GetCurrentBoundRect());
+            if (aFrm1.IsInside(aRect)) {
+                if (!bUnmark) {
+                    if (IsObjMarkable(pObj,pPV))
+                    {
+                        GetMarkedObjectListWriteAccess().InsertEntry(SdrMark(pObj,pPV));
+                        bFnd=true;
+                    }
+                } else {
+                    const size_t nPos=TryToFindMarkedObject(pObj);
+                    if (nPos!=SAL_MAX_SIZE)
+                    {
+                        GetMarkedObjectListWriteAccess().DeleteMark(nPos);
+                        bFnd=true;
+                    }
+                }
+            }
+        }
+    }
+    if (bFnd) {
+        SortMarkedObjects();
+        MarkListHasChanged();
+        AdjustMarkHdl();
+    }
+}
+
+namespace {
+
+void collectUIInformation(const SdrObject* pObj)
+{
+    EventDescription aDescription;
+    aDescription.aAction = "SELECT";
+    aDescription.aParent = "MainWindow";
+    aDescription.aKeyWord = "CurrentApp";
+
+    if (!pObj->GetName().isEmpty())
+        aDescription.aParameters = {{"OBJECT", pObj->GetName()}};
+    else
+        aDescription.aParameters = {{"OBJECT", "Unnamed_Obj_" + OUString::number(pObj->GetOrdNum())}};
+
+    UITestLogger::getInstance().logEvent(aDescription);
+}
+
+}
+
+void SdrMarkView::MarkObj(SdrObject* pObj, SdrPageView* pPV, bool bUnmark, bool bImpNoSetMarkHdl)
+{
+    if (pObj!=nullptr && pPV!=nullptr && IsObjMarkable(pObj, pPV)) {
+        BrkAction();
+        if (!bUnmark)
+        {
+            GetMarkedObjectListWriteAccess().InsertEntry(SdrMark(pObj,pPV));
+            collectUIInformation(pObj);
+        }
+        else
+        {
+            const size_t nPos=TryToFindMarkedObject(pObj);
+            if (nPos!=SAL_MAX_SIZE)
+            {
+                GetMarkedObjectListWriteAccess().DeleteMark(nPos);
+            }
+        }
+        if (!bImpNoSetMarkHdl) {
+            MarkListHasChanged();
+            AdjustMarkHdl();
+        }
+    }
+}
+
+bool SdrMarkView::IsObjMarked(SdrObject const * pObj) const
+{
+    return TryToFindMarkedObject(pObj)!=SAL_MAX_SIZE;
+}
+
+sal_uInt16 SdrMarkView::GetMarkHdlSizePixel() const
+{
+    return maHdlList.GetHdlSize()*2+1;
+}
+
+void SdrMarkView::SetMarkHdlSizePixel(sal_uInt16 nSiz)
+{
+    if (nSiz<3) nSiz=3;
+    nSiz/=2;
+    if (nSiz!=maHdlList.GetHdlSize()) {
+        maHdlList.SetHdlSize(nSiz);
+    }
+}
+
+bool SdrMarkView::getPossibleGridOffsetForSdrObject(
+    basegfx::B2DVector& rOffset,
+    const SdrObject* pObj,
+    const SdrPageView* pPV) const
+{
+    if(nullptr == pObj || nullptr == pPV)
+    {
+        return false;
+    }
+
+    const OutputDevice* pOutputDevice(GetFirstOutputDevice());
+
+    if(nullptr == pOutputDevice)
+    {
+        return false;
+    }
+
+    const SdrPageWindow* pSdrPageWindow(pPV->FindPageWindow(*pOutputDevice));
+
+    if(nullptr == pSdrPageWindow)
+    {
+        return false;
+    }
+
+    const sdr::contact::ObjectContact& rObjectContact(pSdrPageWindow->GetObjectContact());
+
+    if(!rObjectContact.supportsGridOffsets())
+    {
+        return false;
+    }
+
+    const sdr::contact::ViewObjectContact& rVOC(pObj->GetViewContact().GetViewObjectContact(
+        const_cast<sdr::contact::ObjectContact&>(rObjectContact)));
+
+    rObjectContact.calculateGridOffsetForViewOjectContact(rOffset, rVOC);
+
+    return !rOffset.equalZero();
+}
+
+bool SdrMarkView::getPossibleGridOffsetForPosition(
+    basegfx::B2DVector& rOffset,
+    const basegfx::B2DPoint& rPoint,
+    const SdrPageView* pPV) const
+{
+    if(nullptr == pPV)
+    {
+        return false;
+    }
+
+    const OutputDevice* pOutputDevice(GetFirstOutputDevice());
+
+    if(nullptr == pOutputDevice)
+    {
+        return false;
+    }
+
+    const SdrPageWindow* pSdrPageWindow(pPV->FindPageWindow(*pOutputDevice));
+
+    if(nullptr == pSdrPageWindow)
+    {
+        return false;
+    }
+
+    const sdr::contact::ObjectContact& rObjectContact(pSdrPageWindow->GetObjectContact());
+
+    if(!rObjectContact.supportsGridOffsets())
+    {
+        return false;
+    }
+
+    rObjectContact.calculateGridOffsetForB2DRange(rOffset, basegfx::B2DRange(rPoint));
+
+    return !rOffset.equalZero();
+}
+
+SdrObject* SdrMarkView::CheckSingleSdrObjectHit(const Point& rPnt, sal_uInt16 nTol, SdrObject* pObj, SdrPageView* pPV, SdrSearchOptions nOptions, const SdrLayerIDSet* pMVisLay) const
+{
+    if(((nOptions & SdrSearchOptions::IMPISMASTER) && pObj->IsNotVisibleAsMaster()) || (!pObj->IsVisible()))
+    {
+        return nullptr;
+    }
+
+    const bool bCheckIfMarkable(nOptions & SdrSearchOptions::TESTMARKABLE);
+    const bool bDeep(nOptions & SdrSearchOptions::DEEP);
+    const bool bOLE(dynamic_cast< const SdrOle2Obj* >(pObj) !=  nullptr);
+    const bool bTXT(dynamic_cast<const SdrTextObj*>( pObj) != nullptr && static_cast<SdrTextObj*>(pObj)->IsTextFrame());
+    SdrObject* pRet=nullptr;
+    tools::Rectangle aRect(pObj->GetCurrentBoundRect());
+
+    // add possible GridOffset to up-to-now view-independent BoundRect data
+    basegfx::B2DVector aGridOffset(0.0, 0.0);
+    if(getPossibleGridOffsetForSdrObject(aGridOffset, pObj, pPV))
+    {
+        aRect += Point(
+            basegfx::fround(aGridOffset.getX()),
+            basegfx::fround(aGridOffset.getY()));
+    }
+
+    sal_uInt16 nTol2(nTol);
+
+    // double tolerance for OLE, text frames and objects in
+    // active text edit
+    if(bOLE || bTXT || pObj==static_cast<const SdrObjEditView*>(this)->GetTextEditObject())
+    {
+        nTol2*=2;
+    }
+
+    aRect.AdjustLeft( -nTol2 ); // add 1 tolerance for all objects
+    aRect.AdjustTop( -nTol2 );
+    aRect.AdjustRight(nTol2 );
+    aRect.AdjustBottom(nTol2 );
+
+    if (aRect.IsInside(rPnt))
+    {
+        if (!bCheckIfMarkable || IsObjMarkable(pObj,pPV))
+        {
+            SdrObjList* pOL=pObj->GetSubList();
+
+            if (pOL!=nullptr && pOL->GetObjCount()!=0)
+            {
+                SdrObject* pTmpObj;
+                // adjustment hit point for virtual objects
+                Point aPnt( rPnt );
+
+                if ( dynamic_cast<const SdrVirtObj*>( pObj) !=  nullptr )
+                {
+                    Point aOffset = static_cast<SdrVirtObj*>(pObj)->GetOffset();
+                    aPnt.Move( -aOffset.X(), -aOffset.Y() );
+                }
+
+                pRet=CheckSingleSdrObjectHit(aPnt,nTol,pOL,pPV,nOptions,pMVisLay,pTmpObj);
+            }
+            else
+            {
+                if(!pMVisLay || pMVisLay->IsSet(pObj->GetLayer()))
+                {
+                    pRet = SdrObjectPrimitiveHit(*pObj, rPnt, nTol2, *pPV, &pPV->GetVisibleLayers(), false);
+                }
+            }
+        }
+    }
+
+    if (!bDeep && pRet!=nullptr)
+    {
+        pRet=pObj;
+    }
+
+    return pRet;
+}
+
+SdrObject* SdrMarkView::CheckSingleSdrObjectHit(const Point& rPnt, sal_uInt16 nTol, SdrObjList const * pOL, SdrPageView* pPV, SdrSearchOptions nOptions, const SdrLayerIDSet* pMVisLay, SdrObject*& rpRootObj) const
+{
+    return (*this).CheckSingleSdrObjectHit(rPnt,nTol,pOL,pPV,nOptions,pMVisLay,rpRootObj,nullptr);
+}
+SdrObject* SdrMarkView::CheckSingleSdrObjectHit(const Point& rPnt, sal_uInt16 nTol, SdrObjList const * pOL, SdrPageView* pPV, SdrSearchOptions nOptions, const SdrLayerIDSet* pMVisLay, SdrObject*& rpRootObj,const SdrMarkList * pMarkList) const
+{
+    SdrObject* pRet=nullptr;
+    rpRootObj=nullptr;
+    if (pOL!=nullptr)
+    {
+        const bool bRemap(
+            nullptr != pOL->getSdrObjectFromSdrObjList()
+            && nullptr != dynamic_cast< const E3dScene* >(pOL->getSdrObjectFromSdrObjList()));
+        const E3dScene* pRemapScene(bRemap ? static_cast< E3dScene* >(pOL->getSdrObjectFromSdrObjList()) : nullptr);
+        const size_t nObjCount(pOL->GetObjCount());
+        size_t nObjNum(nObjCount);
+
+        while (pRet==nullptr && nObjNum>0)
+        {
+            nObjNum--;
+            SdrObject* pObj;
+
+            if(bRemap)
+            {
+                pObj = pOL->GetObj(pRemapScene->RemapOrdNum(nObjNum));
+            }
+            else
+            {
+                pObj = pOL->GetObj(nObjNum);
+            }
+            if (nOptions & SdrSearchOptions::BEFOREMARK)
+            {
+                if (pMarkList!=nullptr)
+                {
+                    if ((*pMarkList).FindObject(pObj)!=SAL_MAX_SIZE)
+                    {
+                        return nullptr;
+                    }
+                }
+            }
+            pRet=CheckSingleSdrObjectHit(rPnt,nTol,pObj,pPV,nOptions,pMVisLay);
+            if (pRet!=nullptr) rpRootObj=pObj;
+        }
+    }
+    return pRet;
+}
+
+SdrObject* SdrMarkView::PickObj(const Point& rPnt, short nTol, SdrPageView*& rpPV, SdrSearchOptions nOptions) const
+{
+    return PickObj(rPnt, nTol, rpPV, nOptions, nullptr);
+}
+
+SdrObject* SdrMarkView::PickObj(const Point& rPnt, short nTol, SdrPageView*& rpPV, SdrSearchOptions nOptions, SdrObject** ppRootObj, bool* pbHitPassDirect) const
+{ // TODO: lacks a Pass2,Pass3
+    SortMarkedObjects();
+    if (ppRootObj!=nullptr) *ppRootObj=nullptr;
+    if (pbHitPassDirect!=nullptr) *pbHitPassDirect=true;
+    SdrObject* pRet = nullptr;
+    rpPV=nullptr;
+    bool bMarked(nOptions & SdrSearchOptions::MARKED);
+    bool bMasters=!bMarked && bool(nOptions & SdrSearchOptions::ALSOONMASTER);
+    // nOptions & SdrSearchOptions::NEXT: n.i.
+    // nOptions & SdrSearchOptions::PASS2BOUND: n.i.
+    // nOptions & SdrSearchOptions::PASS3NEAREST// n.i.
+    if (nTol<0) nTol=ImpGetHitTolLogic(nTol,nullptr);
+    SdrObject* pObj=nullptr;
+    SdrObject* pHitObj=nullptr;
+    SdrPageView* pPV=nullptr;
+    if (static_cast<const SdrObjEditView*>(this)->IsTextEditFrameHit(rPnt)) {
+        pObj=static_cast<const SdrObjEditView*>(this)->GetTextEditObject();
+        pHitObj=pObj;
+        pPV=static_cast<const SdrObjEditView*>(this)->GetTextEditPageView();
+    }
+    if (bMarked) {
+        const size_t nMrkCnt=GetMarkedObjectCount();
+        size_t nMrkNum=nMrkCnt;
+        while (pHitObj==nullptr && nMrkNum>0) {
+            nMrkNum--;
+            SdrMark* pM=GetSdrMarkByIndex(nMrkNum);
+            pObj=pM->GetMarkedSdrObj();
+            pPV=pM->GetPageView();
+            pHitObj=CheckSingleSdrObjectHit(rPnt,nTol,pObj,pPV,nOptions,nullptr);
+        }
+    }
+    else
+    {
+        pPV = GetSdrPageView();
+
+        if(pPV)
+        {
+            SdrPage* pPage=pPV->GetPage();
+            sal_uInt16 nPgCount=1;
+
+            if(bMasters && pPage->TRG_HasMasterPage())
+            {
+                nPgCount++;
+            }
+            bool bWholePage(nOptions & SdrSearchOptions::WHOLEPAGE);
+            bool bExtraPassForWholePage=bWholePage && pPage!=pPV->GetObjList();
+            if (bExtraPassForWholePage) nPgCount++; // First search in AktObjList, then on the entire page
+            sal_uInt16 nPgNum=nPgCount;
+            while (pHitObj==nullptr && nPgNum>0) {
+                SdrSearchOptions nTmpOptions=nOptions;
+                nPgNum--;
+                const SdrLayerIDSet* pMVisLay=nullptr;
+                SdrObjList* pObjList=nullptr;
+                if (pbHitPassDirect!=nullptr) *pbHitPassDirect = true;
+                if (nPgNum>=nPgCount-1 || (bExtraPassForWholePage && nPgNum>=nPgCount-2))
+                {
+                    pObjList=pPV->GetObjList();
+                    if (bExtraPassForWholePage && nPgNum==nPgCount-2) {
+                        pObjList=pPage;
+                        if (pbHitPassDirect!=nullptr) *pbHitPassDirect = false;
+                    }
+                }
+                else
+                {
+                    // otherwise MasterPage
+                    SdrPage& rMasterPage = pPage->TRG_GetMasterPage();
+                    pMVisLay = &pPage->TRG_GetMasterPageVisibleLayers();
+                    pObjList = &rMasterPage;
+
+                    if (pbHitPassDirect!=nullptr) *pbHitPassDirect = false;
+                    nTmpOptions=nTmpOptions | SdrSearchOptions::IMPISMASTER;
+                }
+                pHitObj=CheckSingleSdrObjectHit(rPnt,nTol,pObjList,pPV,nTmpOptions,pMVisLay,pObj,&(GetMarkedObjectList()));
+            }
+        }
+    }
+    if (pHitObj!=nullptr) {
+        if (ppRootObj!=nullptr) *ppRootObj=pObj;
+        if (nOptions & SdrSearchOptions::DEEP) pObj=pHitObj;
+        if (nOptions & SdrSearchOptions::TESTTEXTEDIT) {
+            if (!pObj->HasTextEdit() || pPV->GetLockedLayers().IsSet(pObj->GetLayer())) {
+                pObj=nullptr;
+            }
+        }
+        if (pObj!=nullptr && (nOptions & SdrSearchOptions::TESTMACRO)) {
+            SdrObjMacroHitRec aHitRec;
+            aHitRec.aPos=rPnt;
+            aHitRec.nTol=nTol;
+            aHitRec.pVisiLayer=&pPV->GetVisibleLayers();
+            aHitRec.pPageView=pPV;
+            if (!pObj->HasMacro() || !pObj->IsMacroHit(aHitRec)) pObj=nullptr;
+        }
+        if (pObj!=nullptr) {
+            pRet=pObj;
+            rpPV=pPV;
+        }
+    }
+    return pRet;
+}
+
+bool SdrMarkView::PickMarkedObj(const Point& rPnt, SdrObject*& rpObj, SdrPageView*& rpPV, SdrSearchOptions nOptions) const
+{
+    SortMarkedObjects();
+    const bool bBoundCheckOn2ndPass(nOptions & SdrSearchOptions::PASS2BOUND);
+    rpObj=nullptr;
+    rpPV=nullptr;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nMarkNum=nMarkCount; nMarkNum>0;) {
+        --nMarkNum;
+        SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+        SdrPageView* pPV=pM->GetPageView();
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        if (CheckSingleSdrObjectHit(rPnt,mnHitTolLog,pObj,pPV,SdrSearchOptions::TESTMARKABLE,nullptr)) {
+            rpObj=pObj;
+            rpPV=pPV;
+            return true;
+        }
+    }
+    if (bBoundCheckOn2ndPass) {
+        for (size_t nMarkNum=nMarkCount; nMarkNum>0;) {
+            --nMarkNum;
+            SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+            SdrPageView* pPV=pM->GetPageView();
+            SdrObject* pObj=pM->GetMarkedSdrObj();
+            tools::Rectangle aRect(pObj->GetCurrentBoundRect());
+            aRect.AdjustLeft( -mnHitTolLog );
+            aRect.AdjustTop( -mnHitTolLog );
+            aRect.AdjustRight(mnHitTolLog );
+            aRect.AdjustBottom(mnHitTolLog );
+            if (aRect.IsInside(rPnt)) {
+                rpObj=pObj;
+                rpPV=pPV;
+                return true;
+            }
+        }
+    }
+    return false;
+}
+
+
+void SdrMarkView::UnmarkAllObj(SdrPageView const * pPV)
+{
+    if (GetMarkedObjectCount()!=0) {
+        BrkAction();
+        if (pPV!=nullptr)
+        {
+            GetMarkedObjectListWriteAccess().DeletePageView(*pPV);
+        }
+        else
+        {
+            GetMarkedObjectListWriteAccess().Clear();
+        }
+        mpMarkedObj=nullptr;
+        mpMarkedPV=nullptr;
+        MarkListHasChanged();
+        AdjustMarkHdl();
+    }
+}
+
+void SdrMarkView::MarkAllObj(SdrPageView* pPV)
+{
+    BrkAction();
+
+    if(!pPV)
+    {
+        pPV = GetSdrPageView();
+    }
+
+    // #i69171# pPV may still be NULL if there is no SDrPageView (!), e.g. when inserting
+    // other files
+    if(pPV)
+    {
+        const bool bMarkChg(GetMarkedObjectListWriteAccess().InsertPageView(*pPV));
+
+        if(bMarkChg)
+        {
+            MarkListHasChanged();
+        }
+    }
+
+    if(GetMarkedObjectCount())
+    {
+        AdjustMarkHdl();
+    }
+}
+
+void SdrMarkView::AdjustMarkHdl(SfxViewShell* pOtherShell)
+{
+    CheckMarked();
+    SetMarkRects();
+    SetMarkHandles(pOtherShell);
+}
+
+// BoundRect in model coordinates, no GridOffset added
+tools::Rectangle SdrMarkView::GetMarkedObjBoundRect() const
+{
+    tools::Rectangle aRect;
+    for (size_t nm=0; nm<GetMarkedObjectCount(); ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        tools::Rectangle aR1(pO->GetCurrentBoundRect());
+        if (aRect.IsEmpty()) aRect=aR1;
+        else aRect.Union(aR1);
+    }
+    return aRect;
+}
+
+// ObjRect in model coordinates, no GridOffset added
+const tools::Rectangle& SdrMarkView::GetMarkedObjRect() const
+{
+    if (mbMarkedObjRectDirty) {
+        const_cast<SdrMarkView*>(this)->mbMarkedObjRectDirty=false;
+        tools::Rectangle aRect;
+        for (size_t nm=0; nm<GetMarkedObjectCount(); ++nm) {
+            SdrMark* pM=GetSdrMarkByIndex(nm);
+            SdrObject* pO = pM->GetMarkedSdrObj();
+            if (!pO)
+                continue;
+            tools::Rectangle aR1(pO->GetSnapRect());
+            if (aRect.IsEmpty()) aRect=aR1;
+            else aRect.Union(aR1);
+        }
+        const_cast<SdrMarkView*>(this)->maMarkedObjRect=aRect;
+    }
+    return maMarkedObjRect;
+}
+
+
+OUString SdrMarkView::ImpGetDescriptionString(const char* pStrCacheID, ImpGetDescriptionOptions nOpt) const
+{
+    OUString sStr = SvxResId(pStrCacheID);
+    const sal_Int32 nPos = sStr.indexOf("%1");
+
+    if(nPos != -1)
+    {
+        if(nOpt == ImpGetDescriptionOptions::POINTS)
+        {
+            sStr = sStr.replaceAt(nPos, 2, GetDescriptionOfMarkedPoints());
+        }
+        else if(nOpt == ImpGetDescriptionOptions::GLUEPOINTS)
+        {
+            sStr = sStr.replaceAt(nPos, 2, GetDescriptionOfMarkedGluePoints());
+        }
+        else
+        {
+            sStr = sStr.replaceAt(nPos, 2, GetDescriptionOfMarkedObjects());
+        }
+    }
+
+    return sStr.replaceFirst("%2", "0");
+}
+
+
+void SdrMarkView::EnterMarkedGroup()
+{
+    // We enter only the first group found (in only one PageView), because
+    // PageView::EnterGroup calls an AdjustMarkHdl.
+    // TODO: I'll have to prevent that via a flag.
+    SdrPageView* pPV = GetSdrPageView();
+
+    if(pPV)
+    {
+        bool bEnter=false;
+        for (size_t nm = GetMarkedObjectCount(); nm > 0 && !bEnter;)
+        {
+            --nm;
+            SdrMark* pM=GetSdrMarkByIndex(nm);
+            if (pM->GetPageView()==pPV) {
+                SdrObject* pObj=pM->GetMarkedSdrObj();
+                if (pObj->IsGroupObject()) {
+                    if (pPV->EnterGroup(pObj)) {
+                        bEnter=true;
+                    }
+                }
+            }
+        }
+    }
+}
+
+
+void SdrMarkView::MarkListHasChanged()
+{
+    GetMarkedObjectListWriteAccess().SetNameDirty();
+    maSdrViewSelection.SetEdgesOfMarkedNodesDirty();
+
+    mbMarkedObjRectDirty=true;
+    mbMarkedPointsRectsDirty=true;
+    bool bOneEdgeMarked=false;
+    if (GetMarkedObjectCount()==1) {
+        const SdrObject* pObj=GetMarkedObjectByIndex(0);
+        if (pObj->GetObjInventor()==SdrInventor::Default) {
+            sal_uInt16 nIdent=pObj->GetObjIdentifier();
+            bOneEdgeMarked=nIdent==OBJ_EDGE;
+        }
+    }
+    ImpSetGlueVisible4(bOneEdgeMarked);
+}
+
+
+void SdrMarkView::SetMoveOutside(bool bOn)
+{
+    maHdlList.SetMoveOutside(bOn);
+}
+
+void SdrMarkView::SetDesignMode( bool bOn )
+{
+    if ( mbDesignMode != bOn )
+    {
+        mbDesignMode = bOn;
+        SdrPageView* pPageView = GetSdrPageView();
+        if ( pPageView )
+            pPageView->SetDesignMode( bOn );
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdmrkv1.cxx b/svx/source/svdraw/svdmrkv1.cxx
new file mode 100644
index 000000000..0d0ae8dc2
--- /dev/null
+++ b/svx/source/svdraw/svdmrkv1.cxx
@@ -0,0 +1,545 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdmrkv.hxx>
+#include <svx/svdpagv.hxx>
+
+
+// Point Selection
+
+
+bool SdrMarkView::HasMarkablePoints() const
+{
+    ForceUndirtyMrkPnt();
+    bool bRet=false;
+    if (!ImpIsFrameHandles()) {
+        const size_t nMarkCount=GetMarkedObjectCount();
+        if (nMarkCount<=static_cast<size_t>(mnFrameHandlesLimit)) {
+            for (size_t nMarkNum=0; nMarkNum<nMarkCount && !bRet; ++nMarkNum) {
+                const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+                const SdrObject* pObj=pM->GetMarkedSdrObj();
+                bRet=pObj->IsPolyObj();
+            }
+        }
+    }
+    return bRet;
+}
+
+sal_Int32 SdrMarkView::GetMarkablePointCount() const
+{
+    ForceUndirtyMrkPnt();
+    sal_Int32 nCount=0;
+    if (!ImpIsFrameHandles()) {
+        const size_t nMarkCount=GetMarkedObjectCount();
+        if (nMarkCount<=static_cast<size_t>(mnFrameHandlesLimit)) {
+            for (size_t nMarkNum=0; nMarkNum<nMarkCount; ++nMarkNum) {
+                const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+                const SdrObject* pObj=pM->GetMarkedSdrObj();
+                if (pObj->IsPolyObj()) {
+                    nCount+=pObj->GetPointCount();
+                }
+            }
+        }
+    }
+    return nCount;
+}
+
+bool SdrMarkView::HasMarkedPoints() const
+{
+    ForceUndirtyMrkPnt();
+    bool bRet=false;
+    if (!ImpIsFrameHandles()) {
+        const size_t nMarkCount=GetMarkedObjectCount();
+        if (nMarkCount<=static_cast<size_t>(mnFrameHandlesLimit)) {
+            for (size_t nMarkNum=0; nMarkNum<nMarkCount && !bRet; ++nMarkNum) {
+                const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+                const SdrUShortCont& rPts = pM->GetMarkedPoints();
+                bRet = !rPts.empty();
+            }
+        }
+    }
+    return bRet;
+}
+
+bool SdrMarkView::IsPointMarkable(const SdrHdl& rHdl) const
+{
+    return !ImpIsFrameHandles() && !rHdl.IsPlusHdl() && rHdl.GetKind()!=SdrHdlKind::Glue && rHdl.GetKind()!=SdrHdlKind::SmartTag && rHdl.GetObj()!=nullptr && rHdl.GetObj()->IsPolyObj();
+}
+
+bool SdrMarkView::MarkPointHelper(SdrHdl* pHdl, SdrMark* pMark, bool bUnmark)
+{
+    return ImpMarkPoint( pHdl, pMark, bUnmark );
+}
+
+bool SdrMarkView::ImpMarkPoint(SdrHdl* pHdl, SdrMark* pMark, bool bUnmark)
+{
+    if (pHdl==nullptr || pHdl->IsPlusHdl() || pHdl->GetKind()==SdrHdlKind::Glue)
+        return false;
+
+    if (pHdl->IsSelected() != bUnmark)
+        return false;
+
+    SdrObject* pObj=pHdl->GetObj();
+    if (pObj==nullptr || !pObj->IsPolyObj())
+        return false;
+
+    if (pMark==nullptr)
+    {
+        const size_t nMarkNum=TryToFindMarkedObject(pObj);
+        if (nMarkNum==SAL_MAX_SIZE)
+            return false;
+        pMark=GetSdrMarkByIndex(nMarkNum);
+    }
+    const sal_uInt32 nHdlNum(pHdl->GetObjHdlNum());
+    SdrUShortCont& rPts=pMark->GetMarkedPoints();
+    if (!bUnmark)
+    {
+        rPts.insert(static_cast<sal_uInt16>(nHdlNum));
+    }
+    else
+    {
+        SdrUShortCont::const_iterator it = rPts.find( static_cast<sal_uInt16>(nHdlNum) );
+        if (it != rPts.end())
+        {
+            rPts.erase(it);
+        }
+        else
+        {
+            return false; // error case!
+        }
+    }
+
+    pHdl->SetSelected(!bUnmark);
+    if (!mbPlusHdlAlways)
+    {
+        if (!bUnmark)
+        {
+            SdrHdlList plusList(nullptr);
+            pObj->AddToPlusHdlList(plusList, *pHdl);
+            sal_uInt32 nCount(plusList.GetHdlCount());
+            for (sal_uInt32 i=0; i<nCount; i++)
+            {
+                SdrHdl* pPlusHdl=plusList.GetHdl(i);
+                pPlusHdl->SetObj(pObj);
+                pPlusHdl->SetPageView(pMark->GetPageView());
+                pPlusHdl->SetPlusHdl(true);
+            }
+            plusList.MoveTo(maHdlList);
+        }
+        else
+        {
+            for (size_t i = maHdlList.GetHdlCount(); i>0;)
+            {
+                --i;
+                SdrHdl* pPlusHdl=maHdlList.GetHdl(i);
+                if (pPlusHdl->IsPlusHdl() && pPlusHdl->GetSourceHdlNum()==nHdlNum)
+                {
+                    maHdlList.RemoveHdl(i);
+                }
+            }
+        }
+    }
+
+    maHdlList.Sort();
+
+    return true;
+}
+
+
+bool SdrMarkView::MarkPoint(SdrHdl& rHdl, bool bUnmark)
+{
+    ForceUndirtyMrkPnt();
+    bool bRet=false;
+    const SdrObject* pObj=rHdl.GetObj();
+    if (IsPointMarkable(rHdl) && rHdl.IsSelected()==bUnmark) {
+        const size_t nMarkNum=TryToFindMarkedObject(pObj);
+        if (nMarkNum!=SAL_MAX_SIZE) {
+            SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+            if (ImpMarkPoint(&rHdl,pM,bUnmark)) {
+                MarkListHasChanged();
+                bRet=true;
+            }
+        }
+    }
+
+    return bRet;
+}
+
+bool SdrMarkView::MarkPoints(const tools::Rectangle* pRect, bool bUnmark)
+{
+    ForceUndirtyMrkPnt();
+    bool bChgd=false;
+    SortMarkedObjects();
+    const SdrObject* pObj0=nullptr;
+    const SdrPageView* pPV0=nullptr;
+    SdrMark* pM=nullptr;
+    maHdlList.Sort();
+    const size_t nHdlCnt=maHdlList.GetHdlCount();
+    for (size_t nHdlNum=nHdlCnt; nHdlNum>0;) {
+        --nHdlNum;
+        SdrHdl* pHdl=maHdlList.GetHdl(nHdlNum);
+        if (IsPointMarkable(*pHdl) && pHdl->IsSelected()==bUnmark) {
+            const SdrObject* pObj=pHdl->GetObj();
+            const SdrPageView* pPV=pHdl->GetPageView();
+            if (pObj!=pObj0 || pPV!=pPV0 || pM==nullptr) { // This section is for optimization,
+                const size_t nMarkNum=TryToFindMarkedObject(pObj);  // so ImpMarkPoint() doesn't always
+                if (nMarkNum!=SAL_MAX_SIZE) { // have to search the object in the MarkList.
+                    pM=GetSdrMarkByIndex(nMarkNum);
+                    pObj0=pObj;
+                    pPV0=pPV;
+                } else {
+#ifdef DBG_UTIL
+                    if (pObj->IsInserted()) {
+                        OSL_FAIL("SdrMarkView::MarkPoints(const Rectangle* pRect): Selected object not found.");
+                    }
+#endif
+                    pM=nullptr;
+                }
+            }
+            Point aPos(pHdl->GetPos());
+            if (pM!=nullptr && (pRect==nullptr || pRect->IsInside(aPos))) {
+                if (ImpMarkPoint(pHdl,pM,bUnmark)) bChgd=true;
+            }
+        }
+    }
+    if (bChgd) {
+        MarkListHasChanged();
+    }
+
+    return bChgd;
+}
+
+void SdrMarkView::MarkNextPoint()
+{
+    ForceUndirtyMrkPnt();
+    SortMarkedObjects();
+}
+
+const tools::Rectangle& SdrMarkView::GetMarkedPointsRect() const
+{
+    ForceUndirtyMrkPnt();
+    if (mbMarkedPointsRectsDirty) ImpSetPointsRects();
+    return maMarkedPointsRect;
+}
+
+void SdrMarkView::SetPlusHandlesAlwaysVisible(bool bOn)
+{ // TODO: Optimize HandlePaint!
+    ForceUndirtyMrkPnt();
+    if (bOn!=mbPlusHdlAlways) {
+        mbPlusHdlAlways=bOn;
+        SetMarkHandles(nullptr);
+        MarkListHasChanged();
+    }
+}
+
+
+// ImpSetPointsRects() is for PolyPoints and GluePoints!
+
+
+void SdrMarkView::ImpSetPointsRects() const
+{
+    tools::Rectangle aPnts;
+    tools::Rectangle aGlue;
+    const size_t nHdlCnt=maHdlList.GetHdlCount();
+    for (size_t nHdlNum=0; nHdlNum<nHdlCnt; ++nHdlNum) {
+        const SdrHdl* pHdl=maHdlList.GetHdl(nHdlNum);
+        SdrHdlKind eKind=pHdl->GetKind();
+        if ((eKind==SdrHdlKind::Poly && pHdl->IsSelected()) || eKind==SdrHdlKind::Glue) {
+            Point aPt(pHdl->GetPos());
+            tools::Rectangle& rR=eKind==SdrHdlKind::Glue ? aGlue : aPnts;
+            if (rR.IsEmpty()) {
+                rR=tools::Rectangle(aPt,aPt);
+            } else {
+                if (aPt.X()<rR.Left  ()) rR.SetLeft(aPt.X() );
+                if (aPt.X()>rR.Right ()) rR.SetRight(aPt.X() );
+                if (aPt.Y()<rR.Top   ()) rR.SetTop(aPt.Y() );
+                if (aPt.Y()>rR.Bottom()) rR.SetBottom(aPt.Y() );
+            }
+        }
+    }
+    const_cast<SdrMarkView*>(this)->maMarkedPointsRect=aPnts;
+    const_cast<SdrMarkView*>(this)->maMarkedGluePointsRect=aGlue;
+    const_cast<SdrMarkView*>(this)->mbMarkedPointsRectsDirty=false;
+}
+
+
+// UndirtyMrkPnt() is for PolyPoints and GluePoints!
+
+
+void SdrMarkView::UndirtyMrkPnt() const
+{
+    bool bChg=false;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nMarkNum=0; nMarkNum<nMarkCount; ++nMarkNum) {
+        SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+        const SdrObject* pObj=pM->GetMarkedSdrObj();
+        // PolyPoints
+        {
+            SdrUShortCont& rPts = pM->GetMarkedPoints();
+            if (pObj->IsPolyObj()) {
+                // Remove invalid selected points, that is, all
+                // entries above the number of points in the object.
+                sal_uInt32 nMax(pObj->GetPointCount());
+
+                SdrUShortCont::const_iterator it = rPts.lower_bound(nMax);
+                if( it != rPts.end() )
+                {
+                    rPts.erase(it, rPts.end());
+                    bChg = true;
+                }
+            }
+            else
+            {
+                OSL_FAIL("SdrMarkView::UndirtyMrkPnt(): Selected points on an object that is not a PolyObj!");
+                if (!rPts.empty())
+                {
+                    rPts.clear();
+                    bChg = true;
+                }
+            }
+        }
+
+        // GluePoints
+        {
+            SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+            const SdrGluePointList* pGPL=pObj->GetGluePointList();
+            if (pGPL!=nullptr) {
+                // Remove invalid selected glue points, that is, all entries
+                // (IDs) that aren't contained in the GluePointList of the
+                // object
+                for(SdrUShortCont::const_iterator it = rPts.begin(); it != rPts.end(); )
+                {
+                    sal_uInt16 nId=*it;
+                    if (pGPL->FindGluePoint(nId)==SDRGLUEPOINT_NOTFOUND) {
+                        it = rPts.erase(it);
+                        bChg=true;
+                    }
+                    else
+                        ++it;
+                }
+            } else {
+                if (!rPts.empty()) {
+                    rPts.clear(); // object doesn't have any glue points (any more)
+                    bChg=true;
+                }
+            }
+        }
+    }
+    if (bChg) const_cast<SdrMarkView*>(this)->mbMarkedPointsRectsDirty=true;
+    const_cast<SdrMarkView*>(this)->mbMrkPntDirty=false;
+}
+
+
+bool SdrMarkView::HasMarkableGluePoints() const
+{
+    bool bRet=false;
+    if (IsGluePointEditMode()) {
+        ForceUndirtyMrkPnt();
+        const size_t nMarkCount=GetMarkedObjectCount();
+        for (size_t nMarkNum=0; nMarkNum<nMarkCount && !bRet; ++nMarkNum) {
+            const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+            const SdrObject* pObj=pM->GetMarkedSdrObj();
+            const SdrGluePointList* pGPL=pObj->GetGluePointList();
+
+            // #i38892#
+            if(pGPL && pGPL->GetCount())
+            {
+                for(sal_uInt16 a(0); !bRet && a < pGPL->GetCount(); a++)
+                {
+                    if((*pGPL)[a].IsUserDefined())
+                    {
+                        bRet = true;
+                    }
+                }
+            }
+        }
+    }
+    return bRet;
+}
+
+bool SdrMarkView::HasMarkedGluePoints() const
+{
+    ForceUndirtyMrkPnt();
+    bool bRet=false;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nMarkNum=0; nMarkNum<nMarkCount && !bRet; ++nMarkNum) {
+        const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+        const SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+        bRet = !rPts.empty();
+    }
+    return bRet;
+}
+
+bool SdrMarkView::MarkGluePoints(const tools::Rectangle* pRect, bool bUnmark)
+{
+    if (!IsGluePointEditMode() && !bUnmark) return false;
+    ForceUndirtyMrkPnt();
+    bool bChgd=false;
+    SortMarkedObjects();
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nMarkNum=0; nMarkNum<nMarkCount; ++nMarkNum) {
+        SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+        const SdrObject* pObj=pM->GetMarkedSdrObj();
+        const SdrGluePointList* pGPL=pObj->GetGluePointList();
+        SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+        if (bUnmark && pRect==nullptr) { // UnmarkAll
+            if (!rPts.empty()) {
+                rPts.clear();
+                bChgd=true;
+            }
+        } else {
+            if (pGPL!=nullptr) {
+                sal_uInt16 nGluePointCnt=pGPL->GetCount();
+                for (sal_uInt16 nGPNum=0; nGPNum<nGluePointCnt; nGPNum++) {
+                    const SdrGluePoint& rGP=(*pGPL)[nGPNum];
+
+                    // #i38892#
+                    if(rGP.IsUserDefined())
+                    {
+                        Point aPos(rGP.GetAbsolutePos(*pObj));
+                        if (pRect==nullptr || pRect->IsInside(aPos)) {
+                            bool bContains = rPts.find( rGP.GetId() ) != rPts.end();
+                            if (!bUnmark && !bContains) {
+                                bChgd=true;
+                                rPts.insert(rGP.GetId());
+                            }
+                            if (bUnmark && bContains) {
+                                bChgd=true;
+                                rPts.erase(rGP.GetId());
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+    if (bChgd) {
+        AdjustMarkHdl();
+        MarkListHasChanged();
+    }
+    return bChgd;
+}
+
+bool SdrMarkView::PickGluePoint(const Point& rPnt, SdrObject*& rpObj, sal_uInt16& rnId, SdrPageView*& rpPV) const
+{
+    rpObj=nullptr; rpPV=nullptr; rnId=0;
+    if (!IsGluePointEditMode()) return false;
+    OutputDevice* pOut=mpActualOutDev.get();
+    if (pOut==nullptr) pOut=GetFirstOutputDevice();
+    if (pOut==nullptr) return false;
+    SortMarkedObjects();
+    const size_t nMarkCount=GetMarkedObjectCount();
+    size_t nMarkNum=nMarkCount;
+    while (nMarkNum>0) {
+        nMarkNum--;
+        const SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrPageView* pPV=pM->GetPageView();
+        const SdrGluePointList* pGPL=pObj->GetGluePointList();
+        if (pGPL!=nullptr) {
+            sal_uInt16 nNum=pGPL->HitTest(rPnt,*pOut,pObj);
+            if (nNum!=SDRGLUEPOINT_NOTFOUND)
+            {
+                // #i38892#
+                const SdrGluePoint& rCandidate = (*pGPL)[nNum];
+
+                if(rCandidate.IsUserDefined())
+                {
+                    rpObj=pObj;
+                    rnId=(*pGPL)[nNum].GetId();
+                    rpPV=pPV;
+                    return true;
+                }
+            }
+        }
+    }
+    return false;
+}
+
+bool SdrMarkView::MarkGluePoint(const SdrObject* pObj, sal_uInt16 nId, bool bUnmark)
+{
+    if (!IsGluePointEditMode()) return false;
+    ForceUndirtyMrkPnt();
+    bool bChgd=false;
+    if (pObj!=nullptr) {
+        const size_t nMarkPos=TryToFindMarkedObject(pObj);
+        if (nMarkPos!=SAL_MAX_SIZE) {
+            SdrMark* pM=GetSdrMarkByIndex(nMarkPos);
+            SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+            bool bContains = rPts.find( nId ) != rPts.end();
+            if (!bUnmark && !bContains) {
+                bChgd=true;
+                rPts.insert(nId);
+            }
+            if (bUnmark && bContains) {
+                bChgd=true;
+                rPts.erase(nId);
+            }
+        } else {
+            // TODO: implement implicit selection of objects
+        }
+    }
+    if (bChgd) {
+        AdjustMarkHdl();
+        MarkListHasChanged();
+    }
+    return bChgd;
+}
+
+bool SdrMarkView::IsGluePointMarked(const SdrObject* pObj, sal_uInt16 nId) const
+{
+    ForceUndirtyMrkPnt();
+    bool bRet=false;
+    const size_t nPos=TryToFindMarkedObject(pObj); // casting to NonConst
+    if (nPos!=SAL_MAX_SIZE) {
+        const SdrMark* pM=GetSdrMarkByIndex(nPos);
+        const SdrUShortCont& rPts = pM->GetMarkedGluePoints();
+        bRet = rPts.find( nId ) != rPts.end();
+    }
+    return bRet;
+}
+
+SdrHdl* SdrMarkView::GetGluePointHdl(const SdrObject* pObj, sal_uInt16 nId) const
+{
+    ForceUndirtyMrkPnt();
+    const size_t nHdlCnt=maHdlList.GetHdlCount();
+    for (size_t nHdlNum=0; nHdlNum<nHdlCnt; ++nHdlNum) {
+        SdrHdl* pHdl=maHdlList.GetHdl(nHdlNum);
+        if (pHdl->GetObj()==pObj &&
+            pHdl->GetKind()==SdrHdlKind::Glue &&
+            pHdl->GetObjHdlNum()==nId ) return pHdl;
+    }
+    return nullptr;
+}
+
+void SdrMarkView::MarkNextGluePoint()
+{
+    ForceUndirtyMrkPnt();
+    SortMarkedObjects();
+}
+
+const tools::Rectangle& SdrMarkView::GetMarkedGluePointsRect() const
+{
+    ForceUndirtyMrkPnt();
+    if (mbMarkedPointsRectsDirty) ImpSetPointsRects();
+    return maMarkedGluePointsRect;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdoashp.cxx b/svx/source/svdraw/svdoashp.cxx
new file mode 100644
index 000000000..4e44f1658
--- /dev/null
+++ b/svx/source/svdraw/svdoashp.cxx
@@ -0,0 +1,3241 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdoashp.hxx>
+#include <svx/unoapi.hxx>
+#include <com/sun/star/loader/CannotActivateFactoryException.hpp>
+#include <com/sun/star/drawing/XShape.hpp>
+#include <com/sun/star/drawing/XCustomShapeEngine.hpp>
+#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp>
+#include <com/sun/star/beans/PropertyValue.hpp>
+#include <com/sun/star/awt/Rectangle.hpp>
+#include <com/sun/star/uno/XComponentContext.hpp>
+#include <comphelper/processfactory.hxx>
+#include <comphelper/sequenceashashmap.hxx>
+#include <com/sun/star/uno/Sequence.h>
+#include <tools/helpers.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svddrgmt.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svditer.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <editeng/eeitem.hxx>
+#include <editeng/editstat.hxx>
+#include <editeng/adjustitem.hxx>
+#include <svx/svdoutl.hxx>
+#include <editeng/outlobj.hxx>
+#include <svx/sdtfchim.hxx>
+#include <svx/EnhancedCustomShapeGeometry.hxx>
+#include <svx/EnhancedCustomShapeTypeNames.hxx>
+#include <svx/EnhancedCustomShape2d.hxx>
+#include <com/sun/star/beans/PropertyValues.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeTextFrame.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeSegment.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeSegmentCommand.hpp>
+#include <editeng/writingmodeitem.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlnclit.hxx>
+#include <sdr/properties/customshapeproperties.hxx>
+#include <sdr/contact/viewcontactofsdrobjcustomshape.hxx>
+#include <svx/xlntrit.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xfltrit.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xflgrit.hxx>
+#include <svx/xflhtit.hxx>
+#include <svx/xbtmpit.hxx>
+#include <vcl/virdev.hxx>
+#include <svx/svdview.hxx>
+#include <svx/sdmetitm.hxx>
+#include <svx/sdprcitm.hxx>
+#include <svx/sdshitm.hxx>
+#include <svx/sdsxyitm.hxx>
+#include <svx/sdtmfitm.hxx>
+#include <svx/sdasitm.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <svdobjplusdata.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <sal/log.hxx>
+#include "presetooxhandleadjustmentrelations.hxx"
+
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::lang;
+using namespace ::com::sun::star::beans;
+using namespace ::com::sun::star::drawing;
+
+static void lcl_ShapeSegmentFromBinary( EnhancedCustomShapeSegment& rSegInfo, sal_uInt16 nSDat )
+{
+    switch( nSDat >> 8 )
+    {
+        case 0x00 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::LINETO;
+            rSegInfo.Count   = nSDat & 0xff;
+            if ( !rSegInfo.Count )
+                rSegInfo.Count = 1;
+            break;
+        case 0x20 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CURVETO;
+            rSegInfo.Count   = nSDat & 0xff;
+            if ( !rSegInfo.Count )
+                rSegInfo.Count = 1;
+            break;
+        case 0x40 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::MOVETO;
+            rSegInfo.Count   = nSDat & 0xff;
+            if ( !rSegInfo.Count )
+                rSegInfo.Count = 1;
+            break;
+        case 0x60 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOSESUBPATH;
+            rSegInfo.Count   = 0;
+            break;
+        case 0x80 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ENDSUBPATH;
+            rSegInfo.Count   = 0;
+            break;
+        case 0xa1 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSETO;
+            rSegInfo.Count   = ( nSDat & 0xff ) / 3;
+            break;
+        case 0xa2 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSE;
+            rSegInfo.Count   = ( nSDat & 0xff ) / 3;
+            break;
+        case 0xa3 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARCTO;
+            rSegInfo.Count   = ( nSDat & 0xff ) >> 2;
+            break;
+        case 0xa4 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARC;
+            rSegInfo.Count   = ( nSDat & 0xff ) >> 2;
+            break;
+        case 0xa5 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO;
+            rSegInfo.Count   = ( nSDat & 0xff ) >> 2;
+            break;
+        case 0xa6 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARC;
+            rSegInfo.Count   = ( nSDat & 0xff ) >> 2;
+            break;
+        case 0xa7 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTX;
+            rSegInfo.Count   = nSDat & 0xff;
+            break;
+        case 0xa8 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTY;
+            rSegInfo.Count   = nSDat & 0xff;
+            break;
+        case 0xaa :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOFILL;
+            rSegInfo.Count   = 0;
+            break;
+        case 0xab :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOSTROKE;
+            rSegInfo.Count   = 0;
+            break;
+        default:
+        case 0xf8 :
+            rSegInfo.Command = EnhancedCustomShapeSegmentCommand::UNKNOWN;
+            rSegInfo.Count   = nSDat;
+            break;
+    }
+}
+
+static MSO_SPT ImpGetCustomShapeType( const SdrObjCustomShape& rCustoShape )
+{
+    MSO_SPT eRetValue = mso_sptNil;
+
+    OUString aEngine( rCustoShape.GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE ).GetValue() );
+    if ( aEngine.isEmpty() || aEngine == "com.sun.star.drawing.EnhancedCustomShapeEngine" )
+    {
+        OUString sShapeType;
+        const SdrCustomShapeGeometryItem& rGeometryItem( rCustoShape.GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+        const Any* pAny = rGeometryItem.GetPropertyValueByName( "Type" );
+        if ( pAny && ( *pAny >>= sShapeType ) )
+            eRetValue = EnhancedCustomShapeTypeNames::Get( sShapeType );
+    }
+    return eRetValue;
+};
+
+static bool ImpVerticalSwitch( const SdrObjCustomShape& rCustoShape )
+{
+    bool bRet = false;
+    MSO_SPT eShapeType( ImpGetCustomShapeType( rCustoShape ) );
+    switch( eShapeType )
+    {
+        case mso_sptAccentBorderCallout90 :     // 2 ortho
+        case mso_sptBorderCallout1 :            // 2 diag
+        case mso_sptBorderCallout2 :            // 3
+        {
+            bRet = true;
+        }
+        break;
+        default: break;
+    }
+    return bRet;
+}
+
+// #i37011# create a clone with all attributes changed to shadow attributes
+// and translation executed, too.
+static SdrObject* ImpCreateShadowObjectClone(const SdrObject& rOriginal, const SfxItemSet& rOriginalSet)
+{
+    SdrObject* pRetval = nullptr;
+    const bool bShadow(rOriginalSet.Get(SDRATTR_SHADOW).GetValue());
+
+    if(bShadow)
+    {
+        // create a shadow representing object
+        const sal_Int32 nXDist(rOriginalSet.Get(SDRATTR_SHADOWXDIST).GetValue());
+        const sal_Int32 nYDist(rOriginalSet.Get(SDRATTR_SHADOWYDIST).GetValue());
+        const ::Color aShadowColor(rOriginalSet.Get(SDRATTR_SHADOWCOLOR).GetColorValue());
+        const sal_uInt16 nShadowTransparence(rOriginalSet.Get(SDRATTR_SHADOWTRANSPARENCE).GetValue());
+        pRetval = rOriginal.CloneSdrObject(rOriginal.getSdrModelFromSdrObject());
+        DBG_ASSERT(pRetval, "ImpCreateShadowObjectClone: Could not clone object (!)");
+
+        // look for used stuff
+        SdrObjListIter aIterator(rOriginal);
+        bool bLineUsed(false);
+        bool bAllFillUsed(false);
+        bool bSolidFillUsed(false);
+        bool bGradientFillUsed(false);
+        bool bHatchFillUsed(false);
+        bool bBitmapFillUsed(false);
+
+        while(aIterator.IsMore())
+        {
+            SdrObject* pObj = aIterator.Next();
+            drawing::FillStyle eFillStyle = pObj->GetMergedItem(XATTR_FILLSTYLE).GetValue();
+
+            if(!bLineUsed)
+            {
+                drawing::LineStyle eLineStyle = pObj->GetMergedItem(XATTR_LINESTYLE).GetValue();
+
+                if(drawing::LineStyle_NONE != eLineStyle)
+                {
+                    bLineUsed = true;
+                }
+            }
+
+            if(!bAllFillUsed)
+            {
+                if(!bSolidFillUsed && drawing::FillStyle_SOLID == eFillStyle)
+                {
+                    bSolidFillUsed = true;
+                    bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed);
+                }
+                if(!bGradientFillUsed && drawing::FillStyle_GRADIENT == eFillStyle)
+                {
+                    bGradientFillUsed = true;
+                    bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed);
+                }
+                if(!bHatchFillUsed && drawing::FillStyle_HATCH == eFillStyle)
+                {
+                    bHatchFillUsed = true;
+                    bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed);
+                }
+                if(!bBitmapFillUsed && drawing::FillStyle_BITMAP == eFillStyle)
+                {
+                    bBitmapFillUsed = true;
+                    bAllFillUsed = (bSolidFillUsed && bGradientFillUsed && bHatchFillUsed && bBitmapFillUsed);
+                }
+            }
+        }
+
+        // translate to shadow coordinates
+        pRetval->NbcMove(Size(nXDist, nYDist));
+
+        // set items as needed
+        SfxItemSet aTempSet(rOriginalSet);
+
+        // if a SvxWritingModeItem (Top->Bottom) is set the text object
+        // is creating a paraobject, but paraobjects can not be created without model. So
+        // we are preventing the crash by setting the writing mode always left to right,
+        // this is not bad since our shadow geometry does not contain text.
+        aTempSet.Put( SvxWritingModeItem( css::text::WritingMode_LR_TB, SDRATTR_TEXTDIRECTION ) );
+
+        // no shadow
+        aTempSet.Put(makeSdrShadowItem(false));
+        aTempSet.Put(makeSdrShadowXDistItem(0));
+        aTempSet.Put(makeSdrShadowYDistItem(0));
+
+        // line color and transparency like shadow
+        if(bLineUsed)
+        {
+            aTempSet.Put(XLineColorItem(OUString(), aShadowColor));
+            aTempSet.Put(XLineTransparenceItem(nShadowTransparence));
+        }
+
+        // fill color and transparency like shadow
+        if(bSolidFillUsed)
+        {
+            aTempSet.Put(XFillColorItem(OUString(), aShadowColor));
+            aTempSet.Put(XFillTransparenceItem(nShadowTransparence));
+        }
+
+        // gradient and transparency like shadow
+        if(bGradientFillUsed)
+        {
+            XGradient aGradient(rOriginalSet.Get(XATTR_FILLGRADIENT).GetGradientValue());
+            sal_uInt8 nStartLuminance(aGradient.GetStartColor().GetLuminance());
+            sal_uInt8 nEndLuminance(aGradient.GetEndColor().GetLuminance());
+
+            if(aGradient.GetStartIntens() != 100)
+            {
+                nStartLuminance = static_cast<sal_uInt8>(nStartLuminance * (static_cast<double>(aGradient.GetStartIntens()) / 100.0));
+            }
+
+            if(aGradient.GetEndIntens() != 100)
+            {
+                nEndLuminance = static_cast<sal_uInt8>(nEndLuminance * (static_cast<double>(aGradient.GetEndIntens()) / 100.0));
+            }
+
+            ::Color aStartColor(
+                static_cast<sal_uInt8>((nStartLuminance * aShadowColor.GetRed()) / 256),
+                static_cast<sal_uInt8>((nStartLuminance * aShadowColor.GetGreen()) / 256),
+                static_cast<sal_uInt8>((nStartLuminance * aShadowColor.GetBlue()) / 256));
+
+            ::Color aEndColor(
+                static_cast<sal_uInt8>((nEndLuminance * aShadowColor.GetRed()) / 256),
+                static_cast<sal_uInt8>((nEndLuminance * aShadowColor.GetGreen()) / 256),
+                static_cast<sal_uInt8>((nEndLuminance * aShadowColor.GetBlue()) / 256));
+
+            aGradient.SetStartColor(aStartColor);
+            aGradient.SetEndColor(aEndColor);
+            aTempSet.Put(XFillGradientItem(aGradient));
+            aTempSet.Put(XFillTransparenceItem(nShadowTransparence));
+        }
+
+        // hatch and transparency like shadow
+        if(bHatchFillUsed)
+        {
+            XHatch aHatch(rOriginalSet.Get(XATTR_FILLHATCH).GetHatchValue());
+            aHatch.SetColor(aShadowColor);
+            aTempSet.Put(XFillHatchItem(aHatch));
+            aTempSet.Put(XFillTransparenceItem(nShadowTransparence));
+        }
+
+        // bitmap and transparency like shadow
+        if(bBitmapFillUsed)
+        {
+            GraphicObject aGraphicObject(rOriginalSet.Get(XATTR_FILLBITMAP).GetGraphicObject());
+            const BitmapEx aBitmapEx(aGraphicObject.GetGraphic().GetBitmapEx());
+
+            if(!aBitmapEx.IsEmpty())
+            {
+                ScopedVclPtr<VirtualDevice> pVirDev(VclPtr<VirtualDevice>::Create());
+                pVirDev->SetOutputSizePixel(aBitmapEx.GetSizePixel());
+                pVirDev->DrawShadowBitmapEx(aBitmapEx, aShadowColor);
+                aGraphicObject.SetGraphic(Graphic(pVirDev->GetBitmapEx(Point(0,0), aBitmapEx.GetSizePixel())));
+            }
+
+            aTempSet.Put(XFillBitmapItem(aGraphicObject));
+            aTempSet.Put(XFillTransparenceItem(nShadowTransparence));
+        }
+
+        // set attributes and paint shadow object
+        pRetval->SetMergedItemSet( aTempSet );
+    }
+    return pRetval;
+}
+
+
+Reference< XCustomShapeEngine > const & SdrObjCustomShape::GetCustomShapeEngine() const
+{
+    if (mxCustomShapeEngine.is())
+        return mxCustomShapeEngine;
+
+    OUString aEngine(GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE ).GetValue());
+    if ( aEngine.isEmpty() )
+        aEngine = "com.sun.star.drawing.EnhancedCustomShapeEngine";
+
+    Reference< XComponentContext > xContext( ::comphelper::getProcessComponentContext() );
+
+    Reference< XShape > aXShape = GetXShapeForSdrObject(const_cast<SdrObjCustomShape*>(this));
+    if ( aXShape.is() )
+    {
+        Sequence< Any > aArgument( 1 );
+        Sequence< PropertyValue > aPropValues( 1 );
+        aPropValues[ 0 ].Name = "CustomShape";
+        aPropValues[ 0 ].Value <<= aXShape;
+        aArgument[ 0 ] <<= aPropValues;
+        try
+        {
+            Reference<XInterface> xInterface(xContext->getServiceManager()->createInstanceWithArgumentsAndContext(aEngine, aArgument, xContext));
+            if (xInterface.is())
+                mxCustomShapeEngine.set( xInterface, UNO_QUERY );
+        }
+        catch (const css::loader::CannotActivateFactoryException&)
+        {
+        }
+    }
+
+    return mxCustomShapeEngine;
+}
+
+const SdrObject* SdrObjCustomShape::GetSdrObjectFromCustomShape() const
+{
+    if ( !mXRenderedCustomShape.is() )
+    {
+        Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() );
+        if ( xCustomShapeEngine.is() )
+            const_cast<SdrObjCustomShape*>(this)->mXRenderedCustomShape = xCustomShapeEngine->render();
+    }
+    SdrObject* pRenderedCustomShape = mXRenderedCustomShape.is()
+                ? GetSdrObjectFromXShape( mXRenderedCustomShape )
+                : nullptr;
+    return pRenderedCustomShape;
+}
+
+// #i37011# Shadow geometry creation
+const SdrObject* SdrObjCustomShape::GetSdrObjectShadowFromCustomShape() const
+{
+    if(!mpLastShadowGeometry)
+    {
+        const SdrObject* pSdrObject = GetSdrObjectFromCustomShape();
+        if(pSdrObject)
+        {
+            const SfxItemSet& rOriginalSet = GetObjectItemSet();
+            const bool bShadow(rOriginalSet.Get( SDRATTR_SHADOW ).GetValue());
+
+            if(bShadow)
+            {
+                // create a clone with all attributes changed to shadow attributes
+                // and translation executed, too.
+                const_cast<SdrObjCustomShape*>(this)->mpLastShadowGeometry =
+                    ImpCreateShadowObjectClone(*pSdrObject, rOriginalSet);
+            }
+        }
+    }
+
+    return mpLastShadowGeometry;
+}
+
+bool SdrObjCustomShape::IsTextPath() const
+{
+    const OUString sTextPath( "TextPath" );
+    bool bTextPathOn = false;
+    const SdrCustomShapeGeometryItem& rGeometryItem = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY );
+    const Any* pAny = rGeometryItem.GetPropertyValueByName( sTextPath, sTextPath );
+    if ( pAny )
+        *pAny >>= bTextPathOn;
+    return bTextPathOn;
+}
+
+bool SdrObjCustomShape::UseNoFillStyle() const
+{
+    bool bRet = false;
+    OUString sShapeType;
+    const OUString sType( "Type" );
+    const SdrCustomShapeGeometryItem& rGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+    const Any* pAny = rGeometryItem.GetPropertyValueByName( sType );
+    if ( pAny )
+        *pAny >>= sShapeType;
+    bRet = !IsCustomShapeFilledByDefault( EnhancedCustomShapeTypeNames::Get( sType ) );
+
+    return bRet;
+}
+
+bool SdrObjCustomShape::IsMirroredX() const
+{
+    bool bMirroredX = false;
+    SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+    const OUString sMirroredX( "MirroredX" );
+    css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredX );
+    if ( pAny )
+        *pAny >>= bMirroredX;
+    return bMirroredX;
+}
+bool SdrObjCustomShape::IsMirroredY() const
+{
+    bool bMirroredY = false;
+    SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+    const OUString sMirroredY( "MirroredY" );
+    css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredY );
+    if ( pAny )
+        *pAny >>= bMirroredY;
+    return bMirroredY;
+}
+void SdrObjCustomShape::SetMirroredX( const bool bMirrorX )
+{
+    SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+    const OUString sMirroredX( "MirroredX" );
+    PropertyValue aPropVal;
+    aPropVal.Name = sMirroredX;
+    aPropVal.Value <<= bMirrorX;
+    aGeometryItem.SetPropertyValue( aPropVal );
+    SetMergedItem( aGeometryItem );
+}
+void SdrObjCustomShape::SetMirroredY( const bool bMirrorY )
+{
+    SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+    const OUString sMirroredY( "MirroredY" );
+    PropertyValue aPropVal;
+    aPropVal.Name = sMirroredY;
+    aPropVal.Value <<= bMirrorY;
+    aGeometryItem.SetPropertyValue( aPropVal );
+    SetMergedItem( aGeometryItem );
+}
+
+double SdrObjCustomShape::GetExtraTextRotation( const bool bPreRotation ) const
+{
+    const css::uno::Any* pAny;
+    const SdrCustomShapeGeometryItem& rGeometryItem = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY );
+    const OUString sTextRotateAngle( "TextRotateAngle" );
+    const OUString sTextPreRotateAngle( "TextPreRotateAngle" );
+    pAny = rGeometryItem.GetPropertyValueByName( bPreRotation ? sTextPreRotateAngle : sTextRotateAngle );
+    double fExtraTextRotateAngle = 0.0;
+    if ( pAny )
+        *pAny >>= fExtraTextRotateAngle;
+    return fExtraTextRotateAngle;
+}
+
+bool SdrObjCustomShape::GetTextBounds( tools::Rectangle& rTextBound ) const
+{
+    bool bRet = false;
+
+    Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() );
+    if ( xCustomShapeEngine.is() )
+    {
+        awt::Rectangle aR( xCustomShapeEngine->getTextBounds() );
+        if ( aR.Width > 1 && aR.Height > 1 )
+        {
+            rTextBound = tools::Rectangle( Point( aR.X, aR.Y ), Size( aR.Width, aR.Height ) );
+            bRet = true;
+        }
+    }
+    return bRet;
+}
+basegfx::B2DPolyPolygon SdrObjCustomShape::GetLineGeometry( const bool bBezierAllowed ) const
+{
+    basegfx::B2DPolyPolygon aRetval;
+    Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() );
+    if ( xCustomShapeEngine.is() )
+    {
+        css::drawing::PolyPolygonBezierCoords aBezierCoords = xCustomShapeEngine->getLineGeometry();
+        try
+        {
+            aRetval = basegfx::utils::UnoPolyPolygonBezierCoordsToB2DPolyPolygon( aBezierCoords );
+            if ( !bBezierAllowed && aRetval.areControlPointsUsed())
+            {
+                aRetval = basegfx::utils::adaptiveSubdivideByAngle(aRetval);
+            }
+        }
+        catch ( const css::lang::IllegalArgumentException & )
+        {
+        }
+    }
+    return aRetval;
+}
+
+std::vector< SdrCustomShapeInteraction > SdrObjCustomShape::GetInteractionHandles() const
+{
+    std::vector< SdrCustomShapeInteraction > aRet;
+    try
+    {
+        Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine() );
+        if ( xCustomShapeEngine.is() )
+        {
+            int i;
+            Sequence< Reference< XCustomShapeHandle > > xInteractionHandles( xCustomShapeEngine->getInteraction() );
+            for ( i = 0; i < xInteractionHandles.getLength(); i++ )
+            {
+                if ( xInteractionHandles[ i ].is() )
+                {
+                    SdrCustomShapeInteraction aSdrCustomShapeInteraction;
+                    aSdrCustomShapeInteraction.xInteraction = xInteractionHandles[ i ];
+                    aSdrCustomShapeInteraction.aPosition = xInteractionHandles[ i ]->getPosition();
+
+                    CustomShapeHandleModes nMode = CustomShapeHandleModes::NONE;
+                    switch( ImpGetCustomShapeType( *this ) )
+                    {
+                        case mso_sptAccentBorderCallout90 :     // 2 ortho
+                        {
+                            if (i == 0)
+                                nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED;
+                            else if (i == 1)
+                                nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_X | CustomShapeHandleModes::RESIZE_ABSOLUTE_Y | CustomShapeHandleModes::MOVE_SHAPE | CustomShapeHandleModes::ORTHO4;
+                        }
+                        break;
+
+                        case mso_sptChevron :
+                        case mso_sptHomePlate :
+                             nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX;
+                        break;
+
+                        case mso_sptWedgeRectCallout :
+                        case mso_sptWedgeRRectCallout :
+                        case mso_sptCloudCallout :
+                        case mso_sptWedgeEllipseCallout :
+                        {
+                            if (i == 0)
+                                nMode |= CustomShapeHandleModes::RESIZE_FIXED;
+                        }
+                        break;
+
+                        case mso_sptBorderCallout1 :            // 2 diag
+                        {
+                            if (i == 0)
+                                nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED;
+                            else if (i == 1)
+                                nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_X | CustomShapeHandleModes::RESIZE_ABSOLUTE_Y | CustomShapeHandleModes::MOVE_SHAPE;
+                        }
+                        break;
+                        case mso_sptBorderCallout2 :            // 3
+                        {
+                            if (i == 0)
+                                nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED;
+                            else if (i == 2)
+                                nMode |= CustomShapeHandleModes::RESIZE_ABSOLUTE_X | CustomShapeHandleModes::RESIZE_ABSOLUTE_Y | CustomShapeHandleModes::MOVE_SHAPE;
+                        }
+                        break;
+                        case mso_sptCallout90 :
+                        case mso_sptAccentCallout90 :
+                        case mso_sptBorderCallout90 :
+                        case mso_sptCallout1 :
+                        case mso_sptCallout2 :
+                        case mso_sptCallout3 :
+                        case mso_sptAccentCallout1 :
+                        case mso_sptAccentCallout2 :
+                        case mso_sptAccentCallout3 :
+                        case mso_sptBorderCallout3 :
+                        case mso_sptAccentBorderCallout1 :
+                        case mso_sptAccentBorderCallout2 :
+                        case mso_sptAccentBorderCallout3 :
+                        {
+                            if (i == 0)
+                                nMode |= CustomShapeHandleModes::RESIZE_FIXED | CustomShapeHandleModes::CREATE_FIXED;
+                        }
+                        break;
+                        default: break;
+                    }
+                    aSdrCustomShapeInteraction.nMode = nMode;
+                    aRet.push_back( aSdrCustomShapeInteraction );
+                }
+            }
+        }
+    }
+    catch( const uno::RuntimeException& )
+    {
+    }
+    return aRet;
+}
+
+
+// BaseProperties section
+#define DEFAULT_MINIMUM_SIGNED_COMPARE  (sal_Int32(0x80000000))
+#define DEFAULT_MAXIMUM_SIGNED_COMPARE  (sal_Int32(0x7fffffff))
+
+static sal_Int32 GetNumberOfProperties ( const SvxMSDffHandle* pData )
+{
+    sal_Int32           nPropertiesNeeded=1;  // position is always needed
+    SvxMSDffHandleFlags nFlags = pData->nFlags;
+
+    if ( nFlags & SvxMSDffHandleFlags::MIRRORED_X )
+        nPropertiesNeeded++;
+    if ( nFlags & SvxMSDffHandleFlags::MIRRORED_Y )
+        nPropertiesNeeded++;
+    if ( nFlags & SvxMSDffHandleFlags::SWITCHED )
+        nPropertiesNeeded++;
+    if ( nFlags & SvxMSDffHandleFlags::POLAR )
+    {
+        nPropertiesNeeded++;
+        if ( nFlags & SvxMSDffHandleFlags::RADIUS_RANGE )
+        {
+            if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE )
+                nPropertiesNeeded++;
+            if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE )
+                nPropertiesNeeded++;
+        }
+    }
+    else if ( nFlags & SvxMSDffHandleFlags::RANGE )
+    {
+        if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE )
+            nPropertiesNeeded++;
+        if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE )
+            nPropertiesNeeded++;
+        if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE )
+            nPropertiesNeeded++;
+        if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE )
+            nPropertiesNeeded++;
+    }
+
+    return nPropertiesNeeded;
+}
+
+static void lcl_ShapePropertiesFromDFF( const SvxMSDffHandle* pData, css::beans::PropertyValues& rPropValues )
+{
+    SvxMSDffHandleFlags nFlags = pData->nFlags;
+    sal_Int32 n=0;
+
+    // POSITION
+    {
+        css::drawing::EnhancedCustomShapeParameterPair aPosition;
+        EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.First, pData->nPositionX, true, true );
+        EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.Second, pData->nPositionY, true, false );
+        rPropValues[ n ].Name = "Position";
+        rPropValues[ n++ ].Value <<= aPosition;
+    }
+    if ( nFlags & SvxMSDffHandleFlags::MIRRORED_X )
+    {
+        rPropValues[ n ].Name = "MirroredX";
+        rPropValues[ n++ ].Value <<= true;
+    }
+    if ( nFlags & SvxMSDffHandleFlags::MIRRORED_Y )
+    {
+        rPropValues[ n ].Name = "MirroredY";
+        rPropValues[ n++ ].Value <<= true;
+    }
+    if ( nFlags & SvxMSDffHandleFlags::SWITCHED )
+    {
+        rPropValues[ n ].Name = "Switched";
+        rPropValues[ n++ ].Value <<= true;
+    }
+    if ( nFlags & SvxMSDffHandleFlags::POLAR )
+    {
+        css::drawing::EnhancedCustomShapeParameterPair aCenter;
+        EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.First, pData->nCenterX,
+                           bool( nFlags & SvxMSDffHandleFlags::CENTER_X_IS_SPECIAL ), true  );
+        EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.Second, pData->nCenterY,
+                           bool( nFlags & SvxMSDffHandleFlags::CENTER_Y_IS_SPECIAL ), false );
+        rPropValues[ n ].Name = "Polar";
+        rPropValues[ n++ ].Value <<= aCenter;
+        if ( nFlags & SvxMSDffHandleFlags::RADIUS_RANGE )
+        {
+            if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE )
+            {
+                css::drawing::EnhancedCustomShapeParameter aRadiusRangeMinimum;
+                EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMinimum, pData->nRangeXMin,
+                           bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MIN_IS_SPECIAL ), true  );
+                rPropValues[ n ].Name = "RadiusRangeMinimum";
+                rPropValues[ n++ ].Value <<= aRadiusRangeMinimum;
+            }
+            if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE )
+            {
+                css::drawing::EnhancedCustomShapeParameter aRadiusRangeMaximum;
+                EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMaximum, pData->nRangeXMax,
+                           bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MAX_IS_SPECIAL ), false );
+                rPropValues[ n ].Name = "RadiusRangeMaximum";
+                rPropValues[ n++ ].Value <<= aRadiusRangeMaximum;
+            }
+        }
+    }
+    else if ( nFlags & SvxMSDffHandleFlags::RANGE )
+    {
+        if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE )
+        {
+            css::drawing::EnhancedCustomShapeParameter aRangeXMinimum;
+            EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMinimum, pData->nRangeXMin,
+                           bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MIN_IS_SPECIAL ), true  );
+            rPropValues[ n ].Name = "RangeXMinimum";
+            rPropValues[ n++ ].Value <<= aRangeXMinimum;
+        }
+        if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE )
+        {
+            css::drawing::EnhancedCustomShapeParameter aRangeXMaximum;
+            EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMaximum, pData->nRangeXMax,
+                           bool( nFlags & SvxMSDffHandleFlags::RANGE_X_MAX_IS_SPECIAL ), false );
+            rPropValues[ n ].Name = "RangeXMaximum";
+            rPropValues[ n++ ].Value <<= aRangeXMaximum;
+        }
+        if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE )
+        {
+            css::drawing::EnhancedCustomShapeParameter aRangeYMinimum;
+            EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMinimum, pData->nRangeYMin,
+                             bool( nFlags & SvxMSDffHandleFlags::RANGE_Y_MIN_IS_SPECIAL ), true );
+            rPropValues[ n ].Name = "RangeYMinimum";
+            rPropValues[ n++ ].Value <<= aRangeYMinimum;
+        }
+        if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE )
+        {
+            css::drawing::EnhancedCustomShapeParameter aRangeYMaximum;
+            EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMaximum, pData->nRangeYMax,
+                             bool( nFlags & SvxMSDffHandleFlags::RANGE_Y_MAX_IS_SPECIAL ), false );
+            rPropValues[ n ].Name = "RangeYMaximum";
+            rPropValues[ n++ ].Value <<= aRangeYMaximum;
+        }
+    }
+}
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrObjCustomShape::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::CustomShapeProperties>(*this);
+}
+
+SdrObjCustomShape::SdrObjCustomShape(SdrModel& rSdrModel)
+:   SdrTextObj(rSdrModel)
+    , fObjectRotation(0.0)
+    , mbAdjustingTextFrameWidthAndHeight(false)
+    , mpLastShadowGeometry(nullptr)
+{
+    bClosedObj = true; // custom shapes may be filled
+    bTextFrame = true;
+}
+
+SdrObjCustomShape::~SdrObjCustomShape()
+{
+    // delete buffered display geometry
+    InvalidateRenderGeometry();
+}
+
+void SdrObjCustomShape::MergeDefaultAttributes( const OUString* pType )
+{
+    PropertyValue aPropVal;
+    OUString sShapeType;
+    const OUString sType( "Type" );
+    SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+    if ( pType && !pType->isEmpty() )
+    {
+        sal_Int32 nType = pType->toInt32();
+        if ( nType )
+            sShapeType = EnhancedCustomShapeTypeNames::Get( static_cast< MSO_SPT >( nType ) );
+        else
+            sShapeType = *pType;
+
+        aPropVal.Name = sType;
+        aPropVal.Value <<= sShapeType;
+        aGeometryItem.SetPropertyValue( aPropVal );
+    }
+    else
+    {
+        Any *pAny = aGeometryItem.GetPropertyValueByName( sType );
+        if ( pAny )
+            *pAny >>= sShapeType;
+    }
+    MSO_SPT eSpType = EnhancedCustomShapeTypeNames::Get( sShapeType );
+
+    const sal_Int32* pDefData = nullptr;
+    const mso_CustomShape* pDefCustomShape = GetCustomShapeContent( eSpType );
+    if ( pDefCustomShape )
+        pDefData = pDefCustomShape->pDefData;
+
+    css::uno::Sequence< css::drawing::EnhancedCustomShapeAdjustmentValue > seqAdjustmentValues;
+
+
+    // AdjustmentValues
+
+    const OUString sAdjustmentValues( "AdjustmentValues" );
+    const Any* pAny = aGeometryItem.GetPropertyValueByName( sAdjustmentValues );
+    if ( pAny )
+        *pAny >>= seqAdjustmentValues;
+    if ( pDefCustomShape && pDefData )  // now check if we have to default some adjustment values
+    {
+        // first check if there are adjustment values are to be appended
+        sal_Int32 i, nAdjustmentValues = seqAdjustmentValues.getLength();
+        sal_Int32 nAdjustmentDefaults = *pDefData++;
+        if ( nAdjustmentDefaults > nAdjustmentValues )
+        {
+            seqAdjustmentValues.realloc( nAdjustmentDefaults );
+            for ( i = nAdjustmentValues; i < nAdjustmentDefaults; i++ )
+            {
+                seqAdjustmentValues[ i ].Value <<= pDefData[ i ];
+                seqAdjustmentValues[ i ].State = css::beans::PropertyState_DIRECT_VALUE;
+            }
+        }
+        // check if there are defaulted adjustment values that should be filled the hard coded defaults (pDefValue)
+        sal_Int32 nCount = std::min(nAdjustmentValues, nAdjustmentDefaults);
+        for ( i = 0; i < nCount; i++ )
+        {
+            if ( seqAdjustmentValues[ i ].State != css::beans::PropertyState_DIRECT_VALUE )
+            {
+                seqAdjustmentValues[ i ].Value <<= pDefData[ i ];
+                seqAdjustmentValues[ i ].State = css::beans::PropertyState_DIRECT_VALUE;
+            }
+        }
+    }
+    aPropVal.Name = sAdjustmentValues;
+    aPropVal.Value <<= seqAdjustmentValues;
+    aGeometryItem.SetPropertyValue( aPropVal );
+
+
+    // Coordsize
+
+    const OUString sViewBox( "ViewBox" );
+    const Any* pViewBox = aGeometryItem.GetPropertyValueByName( sViewBox );
+    css::awt::Rectangle aViewBox;
+    if ( !pViewBox || !(*pViewBox >>= aViewBox ) )
+    {
+        if ( pDefCustomShape )
+        {
+            aViewBox.X = 0;
+            aViewBox.Y = 0;
+            aViewBox.Width = pDefCustomShape->nCoordWidth;
+            aViewBox.Height= pDefCustomShape->nCoordHeight;
+            aPropVal.Name = sViewBox;
+            aPropVal.Value <<= aViewBox;
+            aGeometryItem.SetPropertyValue( aPropVal );
+        }
+    }
+
+    const OUString sPath( "Path" );
+
+
+    // Path/Coordinates
+
+    const OUString sCoordinates( "Coordinates" );
+    pAny = aGeometryItem.GetPropertyValueByName( sPath, sCoordinates );
+    if ( !pAny && pDefCustomShape && pDefCustomShape->nVertices && pDefCustomShape->pVertices )
+    {
+        css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqCoordinates;
+
+        sal_Int32 i, nCount = pDefCustomShape->nVertices;
+        seqCoordinates.realloc( nCount );
+        for ( i = 0; i < nCount; i++ )
+        {
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates[ i ].First, pDefCustomShape->pVertices[ i ].nValA );
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates[ i ].Second, pDefCustomShape->pVertices[ i ].nValB );
+        }
+        aPropVal.Name = sCoordinates;
+        aPropVal.Value <<= seqCoordinates;
+        aGeometryItem.SetPropertyValue( sPath, aPropVal );
+    }
+
+    // Path/GluePoints
+    const OUString sGluePoints( "GluePoints" );
+    pAny = aGeometryItem.GetPropertyValueByName( sPath, sGluePoints );
+    if ( !pAny && pDefCustomShape && pDefCustomShape->nGluePoints && pDefCustomShape->pGluePoints )
+    {
+        css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqGluePoints;
+        sal_Int32 i, nCount = pDefCustomShape->nGluePoints;
+        seqGluePoints.realloc( nCount );
+        for ( i = 0; i < nCount; i++ )
+        {
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints[ i ].First, pDefCustomShape->pGluePoints[ i ].nValA );
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints[ i ].Second, pDefCustomShape->pGluePoints[ i ].nValB );
+        }
+        aPropVal.Name = sGluePoints;
+        aPropVal.Value <<= seqGluePoints;
+        aGeometryItem.SetPropertyValue( sPath, aPropVal );
+    }
+
+    // Path/Segments
+    const OUString sSegments( "Segments" );
+    pAny = aGeometryItem.GetPropertyValueByName( sPath, sSegments );
+    if ( !pAny && pDefCustomShape && pDefCustomShape->nElements && pDefCustomShape->pElements )
+    {
+        css::uno::Sequence< css::drawing::EnhancedCustomShapeSegment > seqSegments;
+
+        sal_Int32 i, nCount = pDefCustomShape->nElements;
+        seqSegments.realloc( nCount );
+        for ( i = 0; i < nCount; i++ )
+        {
+            EnhancedCustomShapeSegment& rSegInfo = seqSegments[ i ];
+            sal_uInt16 nSDat = pDefCustomShape->pElements[ i ];
+            lcl_ShapeSegmentFromBinary( rSegInfo, nSDat );
+        }
+        aPropVal.Name = sSegments;
+        aPropVal.Value <<= seqSegments;
+        aGeometryItem.SetPropertyValue( sPath, aPropVal );
+    }
+
+    // Path/StretchX
+    const OUString sStretchX( "StretchX" );
+    pAny = aGeometryItem.GetPropertyValueByName( sPath, sStretchX );
+    if ( !pAny && pDefCustomShape )
+    {
+        sal_Int32 nXRef = pDefCustomShape->nXRef;
+        if ( nXRef != DEFAULT_MINIMUM_SIGNED_COMPARE )
+        {
+            aPropVal.Name = sStretchX;
+            aPropVal.Value <<= nXRef;
+            aGeometryItem.SetPropertyValue( sPath, aPropVal );
+        }
+    }
+
+    // Path/StretchY
+    const OUString sStretchY( "StretchY" );
+    pAny = aGeometryItem.GetPropertyValueByName( sPath, sStretchY );
+    if ( !pAny && pDefCustomShape )
+    {
+        sal_Int32 nYRef = pDefCustomShape->nYRef;
+        if ( nYRef != DEFAULT_MINIMUM_SIGNED_COMPARE )
+        {
+            aPropVal.Name = sStretchY;
+            aPropVal.Value <<= nYRef;
+            aGeometryItem.SetPropertyValue( sPath, aPropVal );
+        }
+    }
+
+    // Path/TextFrames
+    const OUString sTextFrames( "TextFrames" );
+    pAny = aGeometryItem.GetPropertyValueByName( sPath, sTextFrames );
+    if ( !pAny && pDefCustomShape && pDefCustomShape->nTextRect && pDefCustomShape->pTextRect )
+    {
+        css::uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame > seqTextFrames;
+
+        sal_Int32 i, nCount = pDefCustomShape->nTextRect;
+        seqTextFrames.realloc( nCount );
+        const SvxMSDffTextRectangles* pRectangles = pDefCustomShape->pTextRect;
+        for ( i = 0; i < nCount; i++, pRectangles++ )
+        {
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].TopLeft.First,     pRectangles->nPairA.nValA );
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].TopLeft.Second,    pRectangles->nPairA.nValB );
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].BottomRight.First,  pRectangles->nPairB.nValA );
+            EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].BottomRight.Second, pRectangles->nPairB.nValB );
+        }
+        aPropVal.Name = sTextFrames;
+        aPropVal.Value <<= seqTextFrames;
+        aGeometryItem.SetPropertyValue( sPath, aPropVal );
+    }
+
+    // Equations
+    const OUString sEquations(  "Equations"  );
+    pAny = aGeometryItem.GetPropertyValueByName( sEquations );
+    if ( !pAny && pDefCustomShape && pDefCustomShape->nCalculation && pDefCustomShape->pCalculation )
+    {
+        css::uno::Sequence< OUString > seqEquations;
+
+        sal_Int32 i, nCount = pDefCustomShape->nCalculation;
+        seqEquations.realloc( nCount );
+        const SvxMSDffCalculationData* pData = pDefCustomShape->pCalculation;
+        for ( i = 0; i < nCount; i++, pData++ )
+            seqEquations[ i ] = EnhancedCustomShape2d::GetEquation( pData->nFlags, pData->nVal[ 0 ], pData->nVal[ 1 ], pData->nVal[ 2 ] );
+        aPropVal.Name = sEquations;
+        aPropVal.Value <<= seqEquations;
+        aGeometryItem.SetPropertyValue( aPropVal );
+    }
+
+    // Handles
+    const OUString sHandles(  "Handles"  );
+    pAny = aGeometryItem.GetPropertyValueByName( sHandles );
+    if ( !pAny && pDefCustomShape && pDefCustomShape->nHandles && pDefCustomShape->pHandles )
+    {
+        css::uno::Sequence< css::beans::PropertyValues > seqHandles;
+
+        sal_Int32 i, nCount = pDefCustomShape->nHandles;
+        const SvxMSDffHandle* pData = pDefCustomShape->pHandles;
+        seqHandles.realloc( nCount );
+        for ( i = 0; i < nCount; i++, pData++ )
+        {
+            sal_Int32 nPropertiesNeeded;
+            css::beans::PropertyValues& rPropValues = seqHandles[ i ];
+            nPropertiesNeeded = GetNumberOfProperties( pData );
+            rPropValues.realloc( nPropertiesNeeded );
+            lcl_ShapePropertiesFromDFF( pData, rPropValues );
+        }
+        aPropVal.Name = sHandles;
+        aPropVal.Value <<= seqHandles;
+        aGeometryItem.SetPropertyValue( aPropVal );
+    }
+    else if (pAny && sShapeType.startsWith("ooxml-") && sShapeType != "ooxml-non-primitive")
+    {
+        // ODF is not able to store the ooxml way of connecting handle to an adjustment
+        // value by name, e.g. attribute RefX="adj". So the information is lost, when exporting
+        // a pptx to odp, for example. This part reconstructs this information for the
+        // ooxml preset shapes from their definition.
+        css::uno::Sequence<css::beans::PropertyValues> seqHandles;
+        *pAny >>= seqHandles;
+        bool bChanged(false);
+        for (sal_Int32 i = 0; i < seqHandles.getLength(); i++)
+        {
+            comphelper::SequenceAsHashMap aHandleProps(seqHandles[i]);
+            OUString sFirstRefType;
+            sal_Int32 nFirstAdjRef;
+            OUString sSecondRefType;
+            sal_Int32 nSecondAdjRef;
+            PresetOOXHandleAdj::GetOOXHandleAdjRelation(sShapeType, i, sFirstRefType, nFirstAdjRef,
+                                                        sSecondRefType, nSecondAdjRef);
+            if (sFirstRefType != "na" && 0 <= nFirstAdjRef
+                && nFirstAdjRef < seqAdjustmentValues.getLength())
+            {
+                bChanged |= aHandleProps.createItemIfMissing(sFirstRefType, nFirstAdjRef);
+            }
+            if (sSecondRefType != "na" && 0 <= nSecondAdjRef
+                && nSecondAdjRef < seqAdjustmentValues.getLength())
+            {
+                bChanged |= aHandleProps.createItemIfMissing(sSecondRefType, nSecondAdjRef);
+            }
+            aHandleProps >> seqHandles[i];
+        }
+        if (bChanged)
+        {
+            aPropVal.Name = sHandles;
+            aPropVal.Value <<= seqHandles;
+            aGeometryItem.SetPropertyValue(aPropVal);
+        }
+    }
+
+    SetMergedItem( aGeometryItem );
+}
+
+bool SdrObjCustomShape::IsDefaultGeometry( const DefaultType eDefaultType ) const
+{
+    bool bIsDefaultGeometry = false;
+
+    OUString sShapeType;
+    const OUString sType( "Type" );
+    const SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+    const Any *pAny = aGeometryItem.GetPropertyValueByName( sType );
+    if ( pAny )
+        *pAny >>= sShapeType;
+
+    MSO_SPT eSpType = EnhancedCustomShapeTypeNames::Get( sShapeType );
+
+    const mso_CustomShape* pDefCustomShape = GetCustomShapeContent( eSpType );
+    const OUString sPath( "Path" );
+    switch( eDefaultType )
+    {
+        case DefaultType::Viewbox :
+        {
+            const OUString sViewBox( "ViewBox" );
+            const Any* pViewBox = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sViewBox );
+            css::awt::Rectangle aViewBox;
+            if (pViewBox && (*pViewBox >>= aViewBox) && pDefCustomShape)
+            {
+                if ( ( aViewBox.Width == pDefCustomShape->nCoordWidth )
+                    && ( aViewBox.Height == pDefCustomShape->nCoordHeight ) )
+                    bIsDefaultGeometry = true;
+            }
+        }
+        break;
+
+        case DefaultType::Path :
+        {
+            const OUString sCoordinates( "Coordinates" );
+            pAny = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sPath, sCoordinates );
+            if ( pAny && pDefCustomShape && pDefCustomShape->nVertices && pDefCustomShape->pVertices )
+            {
+                css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqCoordinates1, seqCoordinates2;
+                if ( *pAny >>= seqCoordinates1 )
+                {
+                    sal_Int32 i, nCount = pDefCustomShape->nVertices;
+                    seqCoordinates2.realloc( nCount );
+                    for ( i = 0; i < nCount; i++ )
+                    {
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates2[ i ].First, pDefCustomShape->pVertices[ i ].nValA );
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates2[ i ].Second, pDefCustomShape->pVertices[ i ].nValB );
+                    }
+                    if ( seqCoordinates1 == seqCoordinates2 )
+                        bIsDefaultGeometry = true;
+                }
+            }
+            else if ( pDefCustomShape && ( ( pDefCustomShape->nVertices == 0 ) || ( pDefCustomShape->pVertices == nullptr ) ) )
+                bIsDefaultGeometry = true;
+        }
+        break;
+
+        case DefaultType::Gluepoints :
+        {
+            const OUString sGluePoints( "GluePoints" );
+            pAny = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sPath, sGluePoints );
+            if ( pAny && pDefCustomShape && pDefCustomShape->nGluePoints && pDefCustomShape->pGluePoints )
+            {
+                css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> seqGluePoints1, seqGluePoints2;
+                if ( *pAny >>= seqGluePoints1 )
+                {
+                    sal_Int32 i, nCount = pDefCustomShape->nGluePoints;
+                    seqGluePoints2.realloc( nCount );
+                    for ( i = 0; i < nCount; i++ )
+                    {
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints2[ i ].First, pDefCustomShape->pGluePoints[ i ].nValA );
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints2[ i ].Second, pDefCustomShape->pGluePoints[ i ].nValB );
+                    }
+                    if ( seqGluePoints1 == seqGluePoints2 )
+                        bIsDefaultGeometry = true;
+                }
+            }
+            else if ( pDefCustomShape && ( pDefCustomShape->nGluePoints == 0 ) )
+                bIsDefaultGeometry = true;
+        }
+        break;
+
+        case DefaultType::Segments :
+        {
+            // Path/Segments
+            const OUString sSegments( "Segments" );
+            pAny = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sPath, sSegments );
+            if ( pAny )
+            {
+                css::uno::Sequence< css::drawing::EnhancedCustomShapeSegment > seqSegments1, seqSegments2;
+                if ( *pAny >>= seqSegments1 )
+                {
+                    if ( pDefCustomShape && pDefCustomShape->nElements && pDefCustomShape->pElements )
+                    {
+                        sal_Int32 i, nCount = pDefCustomShape->nElements;
+                        if ( nCount )
+                        {
+                            seqSegments2.realloc( nCount );
+                            for ( i = 0; i < nCount; i++ )
+                            {
+                                EnhancedCustomShapeSegment& rSegInfo = seqSegments2[ i ];
+                                sal_uInt16 nSDat = pDefCustomShape->pElements[ i ];
+                                lcl_ShapeSegmentFromBinary( rSegInfo, nSDat );
+                            }
+                            if ( seqSegments1 == seqSegments2 )
+                                bIsDefaultGeometry = true;
+                        }
+                    }
+                    else
+                    {
+                        // check if it's the default segment description ( M L Z N )
+                        if ( seqSegments1.getLength() == 4 )
+                        {
+                            if ( ( seqSegments1[ 0 ].Command == EnhancedCustomShapeSegmentCommand::MOVETO )
+                                && ( seqSegments1[ 1 ].Command == EnhancedCustomShapeSegmentCommand::LINETO )
+                                && ( seqSegments1[ 2 ].Command == EnhancedCustomShapeSegmentCommand::CLOSESUBPATH )
+                                && ( seqSegments1[ 3 ].Command == EnhancedCustomShapeSegmentCommand::ENDSUBPATH ) )
+                                bIsDefaultGeometry = true;
+                        }
+                    }
+                }
+            }
+            else if ( pDefCustomShape && ( ( pDefCustomShape->nElements == 0 ) || ( pDefCustomShape->pElements == nullptr ) ) )
+                bIsDefaultGeometry = true;
+        }
+        break;
+
+        case DefaultType::StretchX :
+        {
+            const OUString sStretchX( "StretchX" );
+            pAny = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sPath, sStretchX );
+            if ( pAny && pDefCustomShape )
+            {
+                sal_Int32 nStretchX = 0;
+                if ( *pAny >>= nStretchX )
+                {
+                    if ( pDefCustomShape->nXRef == nStretchX )
+                        bIsDefaultGeometry = true;
+                }
+            }
+            else if ( pDefCustomShape && ( pDefCustomShape->nXRef == DEFAULT_MINIMUM_SIGNED_COMPARE ) )
+                bIsDefaultGeometry = true;
+        }
+        break;
+
+        case DefaultType::StretchY :
+        {
+            const OUString sStretchY( "StretchY" );
+            pAny = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sPath, sStretchY );
+            if ( pAny && pDefCustomShape )
+            {
+                sal_Int32 nStretchY = 0;
+                if ( *pAny >>= nStretchY )
+                {
+                    if ( pDefCustomShape->nYRef == nStretchY )
+                        bIsDefaultGeometry = true;
+                }
+            }
+            else if ( pDefCustomShape && ( pDefCustomShape->nYRef == DEFAULT_MINIMUM_SIGNED_COMPARE ) )
+                bIsDefaultGeometry = true;
+        }
+        break;
+
+        case DefaultType::Equations :
+        {
+            const OUString sEquations(  "Equations"  );
+            pAny = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sEquations );
+            if ( pAny && pDefCustomShape && pDefCustomShape->nCalculation && pDefCustomShape->pCalculation )
+            {
+                css::uno::Sequence< OUString > seqEquations1, seqEquations2;
+                if ( *pAny >>= seqEquations1 )
+                {
+                    sal_Int32 i, nCount = pDefCustomShape->nCalculation;
+                    seqEquations2.realloc( nCount );
+
+                    const SvxMSDffCalculationData* pData = pDefCustomShape->pCalculation;
+                    for ( i = 0; i < nCount; i++, pData++ )
+                        seqEquations2[ i ] = EnhancedCustomShape2d::GetEquation( pData->nFlags, pData->nVal[ 0 ], pData->nVal[ 1 ], pData->nVal[ 2 ] );
+
+                    if ( seqEquations1 == seqEquations2 )
+                        bIsDefaultGeometry = true;
+                }
+            }
+            else if ( pDefCustomShape && ( ( pDefCustomShape->nCalculation == 0 ) || ( pDefCustomShape->pCalculation == nullptr ) ) )
+                bIsDefaultGeometry = true;
+        }
+        break;
+
+        case DefaultType::TextFrames :
+        {
+            const OUString sTextFrames(  "TextFrames"  );
+            pAny = const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName( sPath, sTextFrames );
+            if ( pAny && pDefCustomShape && pDefCustomShape->nTextRect && pDefCustomShape->pTextRect )
+            {
+                css::uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame > seqTextFrames1, seqTextFrames2;
+                if ( *pAny >>= seqTextFrames1 )
+                {
+                    sal_Int32 i, nCount = pDefCustomShape->nTextRect;
+                    seqTextFrames2.realloc( nCount );
+                    const SvxMSDffTextRectangles* pRectangles = pDefCustomShape->pTextRect;
+                    for ( i = 0; i < nCount; i++, pRectangles++ )
+                    {
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].TopLeft.First,    pRectangles->nPairA.nValA );
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].TopLeft.Second,   pRectangles->nPairA.nValB );
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].BottomRight.First,  pRectangles->nPairB.nValA );
+                        EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].BottomRight.Second, pRectangles->nPairB.nValB );
+                    }
+                    if ( seqTextFrames1 == seqTextFrames2 )
+                        bIsDefaultGeometry = true;
+                }
+            }
+            else if ( pDefCustomShape && ( ( pDefCustomShape->nTextRect == 0 ) || ( pDefCustomShape->pTextRect == nullptr ) ) )
+                bIsDefaultGeometry = true;
+        }
+        break;
+    }
+    return bIsDefaultGeometry;
+}
+
+void SdrObjCustomShape::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bResizeFreeAllowed=fObjectRotation == 0.0;
+    rInfo.bResizePropAllowed=true;
+    rInfo.bRotateFreeAllowed=true;
+    rInfo.bRotate90Allowed  =true;
+    rInfo.bMirrorFreeAllowed=true;
+    rInfo.bMirror45Allowed  =true;
+    rInfo.bMirror90Allowed  =true;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed     =true;
+    rInfo.bEdgeRadiusAllowed=false;
+    rInfo.bNoContortion     =true;
+
+    // #i37011#
+    if ( mXRenderedCustomShape.is() )
+    {
+        const SdrObject* pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape );
+        if ( pRenderedCustomShape )
+        {
+            // #i37262#
+            // Iterate self over the contained objects, since there are combinations of
+            // polygon and curve objects. In that case, aInfo.bCanConvToPath and
+            // aInfo.bCanConvToPoly would be false. What is needed here is an or, not an and.
+            SdrObjListIter aIterator(*pRenderedCustomShape);
+            while(aIterator.IsMore())
+            {
+                SdrObject* pCandidate = aIterator.Next();
+                SdrObjTransformInfoRec aInfo;
+                pCandidate->TakeObjInfo(aInfo);
+
+                // set path and poly conversion if one is possible since
+                // this object will first be broken
+                const bool bCanConvToPathOrPoly(aInfo.bCanConvToPath || aInfo.bCanConvToPoly);
+                if(rInfo.bCanConvToPath != bCanConvToPathOrPoly)
+                {
+                    rInfo.bCanConvToPath = bCanConvToPathOrPoly;
+                }
+
+                if(rInfo.bCanConvToPoly != bCanConvToPathOrPoly)
+                {
+                    rInfo.bCanConvToPoly = bCanConvToPathOrPoly;
+                }
+
+                if(rInfo.bCanConvToContour != aInfo.bCanConvToContour)
+                {
+                    rInfo.bCanConvToContour = aInfo.bCanConvToContour;
+                }
+
+                if(rInfo.bShearAllowed != aInfo.bShearAllowed)
+                {
+                    rInfo.bShearAllowed = aInfo.bShearAllowed;
+                }
+            }
+        }
+    }
+}
+
+sal_uInt16 SdrObjCustomShape::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_CUSTOMSHAPE);
+}
+
+// #115391# This implementation is based on the TextFrame size of the CustomShape and the
+// state of the ResizeShapeToFitText flag to correctly set TextMinFrameWidth/Height
+void SdrObjCustomShape::AdaptTextMinSize()
+{
+    if (!getSdrModelFromSdrObject().IsCreatingDataObj() && !getSdrModelFromSdrObject().IsPasteResize())
+    {
+        const bool bResizeShapeToFitText(GetObjectItem(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue());
+        SfxItemSet aSet(
+            *GetObjectItemSet().GetPool(),
+            svl::Items<SDRATTR_TEXT_MINFRAMEHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT,
+            SDRATTR_TEXT_MINFRAMEWIDTH, SDRATTR_TEXT_AUTOGROWWIDTH>{}); // contains SDRATTR_TEXT_MAXFRAMEWIDTH
+        bool bChanged(false);
+
+        if(bResizeShapeToFitText)
+        {
+            // always reset MinWidthHeight to zero to only rely on text size and frame size
+            // to allow resizing being completely dependent on text size only
+            aSet.Put(makeSdrTextMinFrameWidthItem(0));
+            aSet.Put(makeSdrTextMinFrameHeightItem(0));
+            bChanged = true;
+        }
+        else
+        {
+            // recreate from CustomShape-specific TextBounds
+            tools::Rectangle aTextBound(maRect);
+
+            if(GetTextBounds(aTextBound))
+            {
+                const long nHDist(GetTextLeftDistance() + GetTextRightDistance());
+                const long nVDist(GetTextUpperDistance() + GetTextLowerDistance());
+                const long nTWdt(std::max(long(0), static_cast<long>(aTextBound.GetWidth() - 1 - nHDist)));
+                const long nTHgt(std::max(long(0), static_cast<long>(aTextBound.GetHeight() - 1 - nVDist)));
+
+                aSet.Put(makeSdrTextMinFrameWidthItem(nTWdt));
+                aSet.Put(makeSdrTextMinFrameHeightItem(nTHgt));
+                bChanged = true;
+            }
+        }
+
+        if(bChanged)
+            SetObjectItemSet(aSet);
+    }
+}
+
+void SdrObjCustomShape::NbcSetSnapRect( const tools::Rectangle& rRect )
+{
+    maRect = rRect;
+    ImpJustifyRect(maRect);
+    InvalidateRenderGeometry();
+
+    AdaptTextMinSize();
+
+    ImpCheckShear();
+    SetRectsDirty();
+    SetChanged();
+}
+
+void SdrObjCustomShape::SetSnapRect( const tools::Rectangle& rRect )
+{
+    tools::Rectangle aBoundRect0;
+    if ( pUserCall )
+        aBoundRect0 = GetLastBoundRect();
+    NbcSetSnapRect( rRect );
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrObjCustomShape::NbcSetLogicRect( const tools::Rectangle& rRect )
+{
+    maRect = rRect;
+    ImpJustifyRect(maRect);
+    InvalidateRenderGeometry();
+
+    AdaptTextMinSize();
+
+    SetRectsDirty();
+    SetChanged();
+}
+
+void SdrObjCustomShape::SetLogicRect( const tools::Rectangle& rRect )
+{
+    tools::Rectangle aBoundRect0;
+    if ( pUserCall )
+        aBoundRect0 = GetLastBoundRect();
+    NbcSetLogicRect(rRect);
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrObjCustomShape::Move( const Size& rSiz )
+{
+    if ( rSiz.Width() || rSiz.Height() )
+    {
+        tools::Rectangle aBoundRect0;
+        if ( pUserCall )
+            aBoundRect0 = GetLastBoundRect();
+        NbcMove(rSiz);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+void SdrObjCustomShape::NbcMove( const Size& rSiz )
+{
+    SdrTextObj::NbcMove( rSiz );
+    if ( mXRenderedCustomShape.is() )
+    {
+        SdrObject* pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape );
+        if ( pRenderedCustomShape )
+        {
+            // #i97149# the visualisation shape needs to be informed
+            // about change, too
+            pRenderedCustomShape->ActionChanged();
+            pRenderedCustomShape->NbcMove( rSiz );
+        }
+    }
+
+    // #i37011# adapt geometry shadow
+    if(mpLastShadowGeometry)
+    {
+        mpLastShadowGeometry->NbcMove( rSiz );
+    }
+}
+
+void SdrObjCustomShape::NbcResize( const Point& rRef, const Fraction& rxFact, const Fraction& ryFact )
+{
+    // taking care of handles that should not been changed
+    tools::Rectangle aOld( maRect );
+    std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() );
+
+    SdrTextObj::NbcResize( rRef, rxFact, ryFact );
+
+    if ( ( rxFact.GetNumerator() != rxFact.GetDenominator() )
+        || ( ryFact.GetNumerator()!= ryFact.GetDenominator() ) )
+    {
+        if ( ( ( rxFact.GetNumerator() < 0 ) && ( rxFact.GetDenominator() > 0 ) ) ||
+            ( ( rxFact.GetNumerator() > 0 ) && ( rxFact.GetDenominator() < 0 ) ) )
+        {
+            SetMirroredX( !IsMirroredX() );
+        }
+        if ( ( ( ryFact.GetNumerator() < 0 ) && ( ryFact.GetDenominator() > 0 ) ) ||
+            ( ( ryFact.GetNumerator() > 0 ) && ( ryFact.GetDenominator() < 0 ) ) )
+        {
+            SetMirroredY( !IsMirroredY() );
+        }
+    }
+
+    for (const auto& rInteraction : aInteractionHandles)
+    {
+        try
+        {
+            if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_FIXED )
+                rInteraction.xInteraction->setControllerPosition( rInteraction.aPosition );
+            if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_X )
+            {
+                sal_Int32 nX = ( rInteraction.aPosition.X - aOld.Left() ) + maRect.Left();
+                rInteraction.xInteraction->setControllerPosition( css::awt::Point( nX, rInteraction.xInteraction->getPosition().Y ) );
+            }
+            else if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX )
+            {
+                sal_Int32 nX = maRect.Right() - (aOld.Right() - rInteraction.aPosition.X);
+                rInteraction.xInteraction->setControllerPosition( css::awt::Point( nX, rInteraction.xInteraction->getPosition().Y ) );
+            }
+            if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_Y )
+            {
+                sal_Int32 nY = ( rInteraction.aPosition.Y - aOld.Top() ) + maRect.Top();
+                rInteraction.xInteraction->setControllerPosition( css::awt::Point( rInteraction.xInteraction->getPosition().X, nY ) );
+            }
+        }
+        catch ( const uno::RuntimeException& )
+        {
+        }
+    }
+    InvalidateRenderGeometry();
+}
+
+void SdrObjCustomShape::NbcRotate( const Point& rRef, long nAngle, double sn, double cs )
+{
+    bool bMirroredX = IsMirroredX();
+    bool bMirroredY = IsMirroredY();
+
+    fObjectRotation = fmod( fObjectRotation, 360.0 );
+    if ( fObjectRotation < 0 )
+        fObjectRotation = 360 + fObjectRotation;
+
+    // the rotation angle for ashapes is stored in fObjectRotation, this rotation
+    // has to be applied to the text object (which is internally using aGeo.nAngle).
+    SdrTextObj::NbcRotate( maRect.TopLeft(), -aGeo.nRotationAngle,        // retrieving the unrotated text object
+                            sin( (-aGeo.nRotationAngle) * F_PI18000 ),
+                            cos( (-aGeo.nRotationAngle) * F_PI18000 ) );
+    aGeo.nRotationAngle = 0;                                             // resetting aGeo data
+    aGeo.RecalcSinCos();
+
+    long nW = static_cast<long>( fObjectRotation * 100 );                      // applying our object rotation
+    if ( bMirroredX )
+        nW = 36000 - nW;
+    if ( bMirroredY )
+        nW = 18000 - nW;
+    nW = nW % 36000;
+    if ( nW < 0 )
+        nW = 36000 + nW;
+    SdrTextObj::NbcRotate( maRect.TopLeft(), nW,                     // applying text rotation
+                            sin( nW * F_PI18000 ),
+                            cos( nW * F_PI18000 ) );
+
+    int nSwap = 0;
+    if ( bMirroredX )
+        nSwap ^= 1;
+    if ( bMirroredY )
+        nSwap ^= 1;
+
+    double fAngle = nAngle;                                                   // updating to our new object rotation
+    fAngle /= 100.0;
+    fObjectRotation = fmod( nSwap ? fObjectRotation - fAngle : fObjectRotation + fAngle, 360.0 );
+    if ( fObjectRotation < 0 )
+        fObjectRotation = 360 + fObjectRotation;
+
+    SdrTextObj::NbcRotate( rRef, nAngle, sn, cs );                           // applying text rotation
+    InvalidateRenderGeometry();
+}
+
+void SdrObjCustomShape::NbcMirror( const Point& rRef1, const Point& rRef2 )
+{
+    // TTTT: Fix for old mirroring, can be removed again in aw080
+    // storing horizontal and vertical flipping without modifying the rotate angle
+    // decompose other flipping to rotation and MirrorX.
+    long ndx = rRef2.X()-rRef1.X();
+    long ndy = rRef2.Y()-rRef1.Y();
+
+    if(!ndx) // MirroredX
+    {
+         SetMirroredX(!IsMirroredX());
+         SdrTextObj::NbcMirror( rRef1, rRef2 );
+    }
+    else
+    {
+        if(!ndy)  // MirroredY
+        {
+            SetMirroredY(!IsMirroredY());
+            SdrTextObj::NbcMirror( rRef1, rRef2 );
+        }
+        else // neither horizontal nor vertical
+        {
+            SetMirroredX(!IsMirroredX());
+
+            // call parent
+            SdrTextObj::NbcMirror( rRef1, rRef2 );
+
+            // update fObjectRotation
+            long nTextObjRotation = aGeo.nRotationAngle;
+            double fAngle = nTextObjRotation;
+
+            fAngle /= 100.0;
+
+            bool bSingleFlip = (IsMirroredX()!= IsMirroredY());
+
+            fObjectRotation = fmod( bSingleFlip ? -fAngle : fAngle, 360.0 );
+
+            if ( fObjectRotation < 0 )
+            {
+                fObjectRotation = 360.0 + fObjectRotation;
+            }
+         }
+    }
+
+    InvalidateRenderGeometry();
+}
+
+void SdrObjCustomShape::Shear( const Point& rRef, long nAngle, double tn, bool bVShear )
+{
+    SdrTextObj::Shear( rRef, nAngle, tn, bVShear );
+    InvalidateRenderGeometry();
+}
+void SdrObjCustomShape::NbcShear( const Point& rRef, long nAngle, double tn, bool bVShear )
+{
+    // TTTT: Fix for old mirroring, can be removed again in aw080
+    SdrTextObj::NbcShear(rRef,nAngle,tn,bVShear);
+
+    // updating fObjectRotation
+    long nTextObjRotation = aGeo.nRotationAngle;
+    double fAngle = nTextObjRotation;
+    fAngle /= 100.0;
+    if (IsMirroredX())
+    {
+        if (IsMirroredY())
+            fObjectRotation = fAngle - 180.0;
+        else
+            fObjectRotation = -fAngle;
+    }
+    else
+    {
+        if (IsMirroredY())
+            fObjectRotation = 180.0 - fAngle;
+        else
+            fObjectRotation = fAngle;
+    }
+    while (fObjectRotation < 0)
+        fObjectRotation += 360.0;
+    while (fObjectRotation >= 360.0)
+        fObjectRotation -= 360.0;
+
+    InvalidateRenderGeometry();
+}
+
+SdrGluePoint SdrObjCustomShape::GetVertexGluePoint(sal_uInt16 nPosNum) const
+{
+    sal_Int32 nWdt = ImpGetLineWdt(); // #i25616#
+
+    // #i25616#
+    if(!LineIsOutsideGeometry())
+    {
+        nWdt++;
+        nWdt /= 2;
+    }
+
+    Point aPt;
+    switch (nPosNum) {
+        case 0: aPt=maRect.TopCenter();    aPt.AdjustY( -nWdt ); break;
+        case 1: aPt=maRect.RightCenter();  aPt.AdjustX(nWdt ); break;
+        case 2: aPt=maRect.BottomCenter(); aPt.AdjustY(nWdt ); break;
+        case 3: aPt=maRect.LeftCenter();   aPt.AdjustX( -nWdt ); break;
+    }
+    if (aGeo.nShearAngle!=0) ShearPoint(aPt,maRect.TopLeft(),aGeo.nTan);
+    if (aGeo.nRotationAngle!=0) RotatePoint(aPt,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+    aPt-=GetSnapRect().Center();
+    SdrGluePoint aGP(aPt);
+    aGP.SetPercent(false);
+    return aGP;
+}
+
+
+// #i38892#
+void SdrObjCustomShape::ImpCheckCustomGluePointsAreAdded()
+{
+    const SdrObject* pSdrObject = GetSdrObjectFromCustomShape();
+
+    if(pSdrObject)
+    {
+        const SdrGluePointList* pSource = pSdrObject->GetGluePointList();
+
+        if(pSource && pSource->GetCount())
+        {
+            if(!SdrTextObj::GetGluePointList())
+            {
+                SdrTextObj::ForceGluePointList();
+            }
+
+            const SdrGluePointList* pList = SdrTextObj::GetGluePointList();
+
+            if(pList)
+            {
+                SdrGluePointList aNewList;
+                sal_uInt16 a;
+
+                for(a = 0; a < pSource->GetCount(); a++)
+                {
+                    SdrGluePoint aCopy((*pSource)[a]);
+                    aCopy.SetUserDefined(false);
+                    aNewList.Insert(aCopy);
+                }
+
+                bool bMirroredX = IsMirroredX();
+                bool bMirroredY = IsMirroredY();
+
+                long nShearAngle = aGeo.nShearAngle;
+                double fTan = aGeo.nTan;
+
+                if ( aGeo.nRotationAngle || nShearAngle || bMirroredX || bMirroredY )
+                {
+                    tools::Polygon aPoly( maRect );
+                    if( nShearAngle )
+                    {
+                        sal_uInt16 nPointCount=aPoly.GetSize();
+                        for (sal_uInt16 i=0; i<nPointCount; i++)
+                            ShearPoint(aPoly[i],maRect.Center(), fTan );
+                    }
+                    if ( aGeo.nRotationAngle )
+                        aPoly.Rotate( maRect.Center(), aGeo.nRotationAngle / 10 );
+
+                    tools::Rectangle aBoundRect( aPoly.GetBoundRect() );
+                    sal_Int32 nXDiff = aBoundRect.Left() - maRect.Left();
+                    sal_Int32 nYDiff = aBoundRect.Top() - maRect.Top();
+
+                    if (nShearAngle && bMirroredX != bMirroredY)
+                    {
+                        nShearAngle = -nShearAngle;
+                        fTan = -fTan;
+                    }
+
+                    Point aRef( maRect.GetWidth() / 2, maRect.GetHeight() / 2 );
+                    for ( a = 0; a < aNewList.GetCount(); a++ )
+                    {
+                        SdrGluePoint& rPoint = aNewList[ a ];
+                        Point aGlue( rPoint.GetPos() );
+                        if ( nShearAngle )
+                            ShearPoint( aGlue, aRef, fTan );
+
+                        RotatePoint(aGlue, aRef, sin(basegfx::deg2rad(fObjectRotation)),
+                                    cos(basegfx::deg2rad(fObjectRotation)));
+                        if ( bMirroredX )
+                            aGlue.setX( maRect.GetWidth() - aGlue.X() );
+                        if ( bMirroredY )
+                            aGlue.setY( maRect.GetHeight() - aGlue.Y() );
+                        aGlue.AdjustX( -nXDiff );
+                        aGlue.AdjustY( -nYDiff );
+                        rPoint.SetPos( aGlue );
+                    }
+                }
+
+                for(a = 0; a < pList->GetCount(); a++)
+                {
+                    const SdrGluePoint& rCandidate = (*pList)[a];
+
+                    if(rCandidate.IsUserDefined())
+                    {
+                        aNewList.Insert(rCandidate);
+                    }
+                }
+
+                // copy new list to local. This is NOT very convenient behavior, the local
+                // GluePointList should not be set, but we delivered by using GetGluePointList(),
+                // maybe on demand. Since the local object is changed here, this is assumed to
+                // be a result of GetGluePointList and thus the list is copied
+                if(pPlusData)
+                {
+                    pPlusData->SetGluePoints(aNewList);
+                }
+            }
+        }
+    }
+}
+
+// #i38892#
+const SdrGluePointList* SdrObjCustomShape::GetGluePointList() const
+{
+    const_cast<SdrObjCustomShape*>(this)->ImpCheckCustomGluePointsAreAdded();
+    return SdrTextObj::GetGluePointList();
+}
+
+// #i38892#
+SdrGluePointList* SdrObjCustomShape::ForceGluePointList()
+{
+    if(SdrTextObj::ForceGluePointList())
+    {
+        ImpCheckCustomGluePointsAreAdded();
+        return SdrTextObj::ForceGluePointList();
+    }
+    else
+    {
+        return nullptr;
+    }
+}
+
+
+sal_uInt32 SdrObjCustomShape::GetHdlCount() const
+{
+    const sal_uInt32 nBasicHdlCount(SdrTextObj::GetHdlCount());
+    return ( GetInteractionHandles().size() + nBasicHdlCount );
+}
+
+void SdrObjCustomShape::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    SdrTextObj::AddToHdlList(rHdlList);
+
+    int nCustomShapeHdlNum = 0;
+    for (SdrCustomShapeInteraction const & rInteraction : GetInteractionHandles())
+    {
+        if ( rInteraction.xInteraction.is() )
+        {
+            try
+            {
+                css::awt::Point aPosition( rInteraction.xInteraction->getPosition() );
+                std::unique_ptr<SdrHdl> pH(new SdrHdl( Point( aPosition.X, aPosition.Y ), SdrHdlKind::CustomShape1 ));
+                pH->SetPointNum( nCustomShapeHdlNum );
+                pH->SetObj( const_cast<SdrObjCustomShape*>(this) );
+                rHdlList.AddHdl(std::move(pH));
+            }
+            catch ( const uno::RuntimeException& )
+            {
+            }
+        }
+        ++nCustomShapeHdlNum;
+    }
+}
+
+bool SdrObjCustomShape::hasSpecialDrag() const
+{
+    return true;
+}
+
+bool SdrObjCustomShape::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    const SdrHdl* pHdl = rDrag.GetHdl();
+
+    if(pHdl && SdrHdlKind::CustomShape1 == pHdl->GetKind())
+    {
+        rDrag.SetEndDragChangesAttributes(true);
+        rDrag.SetNoSnap();
+    }
+    else
+    {
+        const SdrHdl* pHdl2 = rDrag.GetHdl();
+        const SdrHdlKind eHdl((pHdl2 == nullptr) ? SdrHdlKind::Move : pHdl2->GetKind());
+
+        switch( eHdl )
+        {
+            case SdrHdlKind::UpperLeft :
+            case SdrHdlKind::Upper :
+            case SdrHdlKind::UpperRight :
+            case SdrHdlKind::Left  :
+            case SdrHdlKind::Right :
+            case SdrHdlKind::LowerLeft :
+            case SdrHdlKind::Lower :
+            case SdrHdlKind::LowerRight :
+            case SdrHdlKind::Move  :
+            {
+                break;
+            }
+            default:
+            {
+                return false;
+            }
+        }
+    }
+
+    return true;
+}
+
+void SdrObjCustomShape::DragResizeCustomShape( const tools::Rectangle& rNewRect )
+{
+    tools::Rectangle   aOld( maRect );
+    bool    bOldMirroredX( IsMirroredX() );
+    bool    bOldMirroredY( IsMirroredY() );
+
+    tools::Rectangle aNewRect( rNewRect );
+    aNewRect.Justify();
+
+    std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() );
+
+    GeoStat aGeoStat( GetGeoStat() );
+    if ( aNewRect.TopLeft()!= maRect.TopLeft() &&
+        ( aGeo.nRotationAngle || aGeo.nShearAngle ) )
+    {
+        Point aNewPos( aNewRect.TopLeft() );
+        if ( aGeo.nShearAngle ) ShearPoint( aNewPos, aOld.TopLeft(), aGeoStat.nTan );
+        if ( aGeo.nRotationAngle )  RotatePoint(aNewPos, aOld.TopLeft(), aGeoStat.nSin, aGeoStat.nCos );
+        aNewRect.SetPos( aNewPos );
+    }
+    if ( aNewRect != maRect )
+    {
+        SetLogicRect( aNewRect );
+        InvalidateRenderGeometry();
+
+        if ( rNewRect.Left() > rNewRect.Right() )
+        {
+            Point aTop( ( GetSnapRect().Left() + GetSnapRect().Right() ) >> 1, GetSnapRect().Top() );
+            Point aBottom( aTop.X(), aTop.Y() + 1000 );
+            NbcMirror( aTop, aBottom );
+        }
+        if ( rNewRect.Top() > rNewRect.Bottom() )
+        {
+            Point aLeft( GetSnapRect().Left(), ( GetSnapRect().Top() + GetSnapRect().Bottom() ) >> 1 );
+            Point aRight( aLeft.X() + 1000, aLeft.Y() );
+            NbcMirror( aLeft, aRight );
+        }
+
+        for (const auto& rInteraction : aInteractionHandles)
+        {
+            try
+            {
+                if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_FIXED )
+                    rInteraction.xInteraction->setControllerPosition( rInteraction.aPosition );
+                if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_X ||
+                     rInteraction.nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX )
+                {
+                    if (rInteraction.nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_NEGX)
+                        bOldMirroredX = !bOldMirroredX;
+
+                    sal_Int32 nX;
+                    if ( bOldMirroredX )
+                    {
+                        nX = ( rInteraction.aPosition.X - aOld.Right() );
+                        if ( rNewRect.Left() > rNewRect.Right() )
+                            nX = maRect.Left() - nX;
+                        else
+                            nX += maRect.Right();
+                    }
+                    else
+                    {
+                        nX = ( rInteraction.aPosition.X - aOld.Left() );
+                        if ( rNewRect.Left() > rNewRect.Right() )
+                            nX = maRect.Right() - nX;
+                        else
+                            nX += maRect.Left();
+                    }
+                    rInteraction.xInteraction->setControllerPosition( css::awt::Point( nX, rInteraction.xInteraction->getPosition().Y ) );
+                }
+                if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_ABSOLUTE_Y )
+                {
+                    sal_Int32 nY;
+                    if ( bOldMirroredY )
+                    {
+                        nY = ( rInteraction.aPosition.Y - aOld.Bottom() );
+                        if ( rNewRect.Top() > rNewRect.Bottom() )
+                            nY = maRect.Top() - nY;
+                        else
+                            nY += maRect.Bottom();
+                    }
+                    else
+                    {
+                        nY = ( rInteraction.aPosition.Y - aOld.Top() );
+                        if ( rNewRect.Top() > rNewRect.Bottom() )
+                            nY = maRect.Bottom() - nY;
+                        else
+                            nY += maRect.Top();
+                    }
+                    rInteraction.xInteraction->setControllerPosition( css::awt::Point( rInteraction.xInteraction->getPosition().X, nY ) );
+                }
+            }
+            catch ( const uno::RuntimeException& )
+            {
+            }
+        }
+    }
+}
+
+void SdrObjCustomShape::DragMoveCustomShapeHdl( const Point& rDestination,
+        const sal_uInt16 nCustomShapeHdlNum, bool bMoveCalloutRectangle )
+{
+    std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() );
+    if ( nCustomShapeHdlNum < aInteractionHandles.size() )
+    {
+        SdrCustomShapeInteraction aInteractionHandle( aInteractionHandles[ nCustomShapeHdlNum ] );
+        if ( aInteractionHandle.xInteraction.is() )
+        {
+            try
+            {
+                css::awt::Point aPt( rDestination.X(), rDestination.Y() );
+                if ( aInteractionHandle.nMode & CustomShapeHandleModes::MOVE_SHAPE && bMoveCalloutRectangle )
+                {
+                    sal_Int32 nXDiff = aPt.X - aInteractionHandle.aPosition.X;
+                    sal_Int32 nYDiff = aPt.Y - aInteractionHandle.aPosition.Y;
+
+                    maRect.Move( nXDiff, nYDiff );
+                    aOutRect.Move( nXDiff, nYDiff );
+                    maSnapRect.Move( nXDiff, nYDiff );
+                    SetRectsDirty(true);
+                    InvalidateRenderGeometry();
+
+                    for (const auto& rInteraction : aInteractionHandles)
+                    {
+                        if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_FIXED )
+                        {
+                            if ( rInteraction.xInteraction.is() )
+                                rInteraction.xInteraction->setControllerPosition( rInteraction.aPosition );
+                        }
+                    }
+                }
+                aInteractionHandle.xInteraction->setControllerPosition( aPt );
+            }
+            catch ( const uno::RuntimeException& )
+            {
+            }
+        }
+    }
+}
+
+bool SdrObjCustomShape::applySpecialDrag(SdrDragStat& rDrag)
+{
+    const SdrHdl* pHdl = rDrag.GetHdl();
+    const SdrHdlKind eHdl((pHdl == nullptr) ? SdrHdlKind::Move : pHdl->GetKind());
+
+    switch(eHdl)
+    {
+        case SdrHdlKind::CustomShape1 :
+        {
+            rDrag.SetEndDragChangesGeoAndAttributes(true);
+            DragMoveCustomShapeHdl( rDrag.GetNow(), static_cast<sal_uInt16>(pHdl->GetPointNum()), !rDrag.GetDragMethod()->IsShiftPressed() );
+            SetRectsDirty();
+            InvalidateRenderGeometry();
+            SetChanged();
+            break;
+        }
+
+        case SdrHdlKind::UpperLeft :
+        case SdrHdlKind::Upper :
+        case SdrHdlKind::UpperRight :
+        case SdrHdlKind::Left  :
+        case SdrHdlKind::Right :
+        case SdrHdlKind::LowerLeft :
+        case SdrHdlKind::Lower :
+        case SdrHdlKind::LowerRight :
+        {
+            DragResizeCustomShape( ImpDragCalcRect(rDrag) );
+            break;
+        }
+        case SdrHdlKind::Move :
+        {
+            Move(Size(rDrag.GetDX(), rDrag.GetDY()));
+            break;
+        }
+        default: break;
+    }
+
+    return true;
+}
+
+
+void SdrObjCustomShape::DragCreateObject( SdrDragStat& rStat )
+{
+    tools::Rectangle aRect1;
+    rStat.TakeCreateRect( aRect1 );
+
+    std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() );
+
+    sal_uInt32 const nDefaultObjectSizeWidth = 3000;      // default width from SDOptions ?
+    sal_uInt32 const nDefaultObjectSizeHeight= 3000;
+
+    if ( ImpVerticalSwitch( *this ) )
+    {
+        SetMirroredX( aRect1.Left() > aRect1.Right() );
+
+        aRect1 = tools::Rectangle( rStat.GetNow(), Size( nDefaultObjectSizeWidth, nDefaultObjectSizeHeight ) );
+        // subtracting the horizontal difference of the latest handle from shape position
+        if ( !aInteractionHandles.empty() )
+        {
+            sal_Int32 nHandlePos = aInteractionHandles[ aInteractionHandles.size() - 1 ].xInteraction->getPosition().X;
+            aRect1.Move( maRect.Left() - nHandlePos, 0 );
+        }
+    }
+    ImpJustifyRect( aRect1 );
+    rStat.SetActionRect( aRect1 );
+    maRect = aRect1;
+    SetRectsDirty();
+
+    for (const auto& rInteraction : aInteractionHandles)
+    {
+        try
+        {
+            if ( rInteraction.nMode & CustomShapeHandleModes::CREATE_FIXED )
+                rInteraction.xInteraction->setControllerPosition( awt::Point( rStat.GetStart().X(), rStat.GetStart().Y() ) );
+        }
+        catch ( const uno::RuntimeException& )
+        {
+        }
+    }
+
+    SetBoundRectDirty();
+    bSnapRectDirty=true;
+}
+
+bool SdrObjCustomShape::MovCreate(SdrDragStat& rStat)
+{
+    SdrView* pView = rStat.GetView();       // #i37448#
+    if( pView && pView->IsSolidDragging() )
+    {
+        InvalidateRenderGeometry();
+    }
+    DragCreateObject( rStat );
+    SetRectsDirty();
+    return true;
+}
+
+bool SdrObjCustomShape::EndCreate( SdrDragStat& rStat, SdrCreateCmd eCmd )
+{
+    DragCreateObject( rStat );
+
+    AdaptTextMinSize();
+
+    SetRectsDirty();
+    return ( eCmd == SdrCreateCmd::ForceEnd || rStat.GetPointCount() >= 2 );
+}
+
+basegfx::B2DPolyPolygon SdrObjCustomShape::TakeCreatePoly(const SdrDragStat& /*rDrag*/) const
+{
+    return GetLineGeometry( false );
+}
+
+
+// in context with the SdrObjCustomShape the SdrTextAutoGrowHeightItem == true -> Resize Shape to fit text,
+//                                     the SdrTextAutoGrowWidthItem  == true -> Word wrap text in Shape
+bool SdrObjCustomShape::IsAutoGrowHeight() const
+{
+    const SfxItemSet& rSet = GetMergedItemSet();
+    bool bIsAutoGrowHeight = rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue();
+    if ( bIsAutoGrowHeight && IsVerticalWriting() )
+        bIsAutoGrowHeight = !rSet.Get(SDRATTR_TEXT_WORDWRAP).GetValue();
+    return bIsAutoGrowHeight;
+}
+bool SdrObjCustomShape::IsAutoGrowWidth() const
+{
+    const SfxItemSet& rSet = GetMergedItemSet();
+    bool bIsAutoGrowWidth = rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue();
+    if ( bIsAutoGrowWidth && !IsVerticalWriting() )
+        bIsAutoGrowWidth = !rSet.Get(SDRATTR_TEXT_WORDWRAP).GetValue();
+    return bIsAutoGrowWidth;
+}
+
+/* The following method is identical to the SdrTextObj::SetVerticalWriting method, the only difference
+   is that the SdrAutoGrowWidthItem and SdrAutoGrowHeightItem are not exchanged if the vertical writing
+   mode has been changed */
+
+void SdrObjCustomShape::SetVerticalWriting( bool bVertical )
+{
+    ForceOutlinerParaObject();
+
+    OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+
+    DBG_ASSERT( pOutlinerParaObject, "SdrTextObj::SetVerticalWriting() without OutlinerParaObject!" );
+
+    if( pOutlinerParaObject )
+    {
+        if(pOutlinerParaObject->IsVertical() != bVertical)
+        {
+            // get item settings
+            const SfxItemSet& rSet = GetObjectItemSet();
+
+            // Also exchange horizontal and vertical adjust items
+            SdrTextHorzAdjust eHorz = rSet.Get(SDRATTR_TEXT_HORZADJUST).GetValue();
+            SdrTextVertAdjust eVert = rSet.Get(SDRATTR_TEXT_VERTADJUST).GetValue();
+
+            // rescue object size, SetSnapRect below expects logic rect,
+            // not snap rect.
+            tools::Rectangle aObjectRect = GetLogicRect();
+
+            // prepare ItemSet to set exchanged width and height items
+            SfxItemSet aNewSet(*rSet.GetPool(),
+                svl::Items<SDRATTR_TEXT_AUTOGROWHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT,
+                // Expanded item ranges to also support horizontal and vertical adjust.
+                SDRATTR_TEXT_VERTADJUST, SDRATTR_TEXT_VERTADJUST,
+                SDRATTR_TEXT_AUTOGROWWIDTH, SDRATTR_TEXT_HORZADJUST>{});
+
+            aNewSet.Put(rSet);
+
+            // Exchange horizontal and vertical adjusts
+            switch(eVert)
+            {
+                case SDRTEXTVERTADJUST_TOP: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); break;
+                case SDRTEXTVERTADJUST_CENTER: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_CENTER)); break;
+                case SDRTEXTVERTADJUST_BOTTOM: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_LEFT)); break;
+                case SDRTEXTVERTADJUST_BLOCK: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_BLOCK)); break;
+            }
+            switch(eHorz)
+            {
+                case SDRTEXTHORZADJUST_LEFT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BOTTOM)); break;
+                case SDRTEXTHORZADJUST_CENTER: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); break;
+                case SDRTEXTHORZADJUST_RIGHT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_TOP)); break;
+                case SDRTEXTHORZADJUST_BLOCK: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BLOCK)); break;
+            }
+
+            pOutlinerParaObject = GetOutlinerParaObject();
+            if ( pOutlinerParaObject )
+                pOutlinerParaObject->SetVertical(bVertical);
+            SetObjectItemSet( aNewSet );
+
+            // restore object size
+            SetSnapRect(aObjectRect);
+        }
+    }
+}
+
+void SdrObjCustomShape::SuggestTextFrameSize(Size aSuggestedTextFrameSize)
+{
+    m_aSuggestedTextFrameSize = aSuggestedTextFrameSize;
+}
+
+bool SdrObjCustomShape::AdjustTextFrameWidthAndHeight(tools::Rectangle& rR, bool bHgt, bool bWdt) const
+{
+    // Either we have text or the application has native text and suggested its size to us.
+    bool bHasText = HasText() || !m_aSuggestedTextFrameSize.IsEmpty();
+    if ( bHasText && !rR.IsEmpty() )
+    {
+        bool bWdtGrow=bWdt && IsAutoGrowWidth();
+        bool bHgtGrow=bHgt && IsAutoGrowHeight();
+        if ( bWdtGrow || bHgtGrow )
+        {
+            tools::Rectangle aR0(rR);
+            long nHgt=0,nMinHgt=0,nMaxHgt=0;
+            long nWdt=0,nMinWdt=0,nMaxWdt=0;
+            Size aSiz(rR.GetSize()); aSiz.AdjustWidth( -1 ); aSiz.AdjustHeight( -1 );
+            Size aMaxSiz(100000,100000);
+            Size aTmpSiz(getSdrModelFromSdrObject().GetMaxObjSize());
+            if (aTmpSiz.Width()!=0) aMaxSiz.setWidth(aTmpSiz.Width() );
+            if (aTmpSiz.Height()!=0) aMaxSiz.setHeight(aTmpSiz.Height() );
+            if (bWdtGrow)
+            {
+                nMinWdt=GetMinTextFrameWidth();
+                nMaxWdt=GetMaxTextFrameWidth();
+                if (nMaxWdt==0 || nMaxWdt>aMaxSiz.Width()) nMaxWdt=aMaxSiz.Width();
+                if (nMinWdt<=0) nMinWdt=1;
+                aSiz.setWidth(nMaxWdt );
+            }
+            if (bHgtGrow)
+            {
+                nMinHgt=GetMinTextFrameHeight();
+                nMaxHgt=GetMaxTextFrameHeight();
+                if (nMaxHgt==0 || nMaxHgt>aMaxSiz.Height()) nMaxHgt=aMaxSiz.Height();
+                if (nMinHgt<=0) nMinHgt=1;
+                aSiz.setHeight(nMaxHgt );
+            }
+            long nHDist=GetTextLeftDistance()+GetTextRightDistance();
+            long nVDist=GetTextUpperDistance()+GetTextLowerDistance();
+            aSiz.AdjustWidth( -nHDist );
+            aSiz.AdjustHeight( -nVDist );
+            if ( aSiz.Width() < 2 )
+                aSiz.setWidth( 2 );   // minimum size=2
+            if ( aSiz.Height() < 2 )
+                aSiz.setHeight( 2 ); // minimum size=2
+
+            if (HasText())
+            {
+                if(pEdtOutl)
+                {
+                    pEdtOutl->SetMaxAutoPaperSize( aSiz );
+                    if (bWdtGrow)
+                    {
+                        Size aSiz2(pEdtOutl->CalcTextSize());
+                        nWdt=aSiz2.Width()+1; // a little more tolerance
+                        if (bHgtGrow) nHgt=aSiz2.Height()+1; // a little more tolerance
+                    } else
+                    {
+                        nHgt=pEdtOutl->GetTextHeight()+1; // a little more tolerance
+                    }
+                }
+                else
+                {
+                    Outliner& rOutliner=ImpGetDrawOutliner();
+                    rOutliner.SetPaperSize(aSiz);
+                    rOutliner.SetUpdateMode(true);
+                    // TODO: add the optimization with bPortionInfoChecked again.
+                    OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+                    if( pOutlinerParaObject != nullptr )
+                    {
+                        rOutliner.SetText(*pOutlinerParaObject);
+                        rOutliner.SetFixedCellHeight(GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT).GetValue());
+                    }
+                    if ( bWdtGrow )
+                    {
+                        Size aSiz2(rOutliner.CalcTextSize());
+                        nWdt=aSiz2.Width()+1; // a little more tolerance
+                        if ( bHgtGrow )
+                            nHgt=aSiz2.Height()+1; // a little more tolerance
+                    }
+                    else
+                        nHgt = rOutliner.GetTextHeight()+1; // a little more tolerance
+                    rOutliner.Clear();
+                }
+            }
+            else
+            {
+                nHgt = m_aSuggestedTextFrameSize.Height();
+                nWdt = m_aSuggestedTextFrameSize.Width();
+            }
+            if ( nWdt < nMinWdt )
+                nWdt = nMinWdt;
+            if ( nWdt > nMaxWdt )
+                nWdt = nMaxWdt;
+            nWdt += nHDist;
+            if ( nWdt < 1 )
+                nWdt = 1; // nHDist may also be negative
+            if ( nHgt < nMinHgt )
+                nHgt = nMinHgt;
+            if ( nHgt > nMaxHgt )
+                nHgt = nMaxHgt;
+            nHgt+=nVDist;
+            if ( nHgt < 1 )
+                nHgt = 1; // nVDist may also be negative
+            long nWdtGrow = nWdt-(rR.Right()-rR.Left());
+            long nHgtGrow = nHgt-(rR.Bottom()-rR.Top());
+            if ( nWdtGrow == 0 )
+                bWdtGrow = false;
+            if ( nHgtGrow == 0 )
+                bHgtGrow=false;
+            if ( bWdtGrow || bHgtGrow || !m_aSuggestedTextFrameSize.IsEmpty())
+            {
+                if ( bWdtGrow || m_aSuggestedTextFrameSize.Width() )
+                {
+                    SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust();
+                    if (m_aSuggestedTextFrameSize.Width())
+                    {
+                        rR.SetRight(rR.Left() + m_aSuggestedTextFrameSize.Width());
+                    }
+                    else if ( eHAdj == SDRTEXTHORZADJUST_LEFT )
+                        rR.AdjustRight(nWdtGrow );
+                    else if ( eHAdj == SDRTEXTHORZADJUST_RIGHT )
+                        rR.AdjustLeft( -nWdtGrow );
+                    else
+                    {
+                        long nWdtGrow2=nWdtGrow/2;
+                        rR.AdjustLeft( -nWdtGrow2 );
+                        rR.SetRight(rR.Left()+nWdt );
+                    }
+                }
+                if ( bHgtGrow || m_aSuggestedTextFrameSize.Height() )
+                {
+                    SdrTextVertAdjust eVAdj=GetTextVerticalAdjust();
+                    if (m_aSuggestedTextFrameSize.Height())
+                    {
+                        rR.SetBottom(rR.Top() + m_aSuggestedTextFrameSize.Height());
+                    }
+                    else if ( eVAdj == SDRTEXTVERTADJUST_TOP )
+                        rR.AdjustBottom(nHgtGrow );
+                    else if ( eVAdj == SDRTEXTVERTADJUST_BOTTOM )
+                        rR.AdjustTop( -nHgtGrow );
+                    else
+                    {
+                        long nHgtGrow2=nHgtGrow/2;
+                        rR.AdjustTop( -nHgtGrow2 );
+                        rR.SetBottom(rR.Top()+nHgt );
+                    }
+                }
+                if ( aGeo.nRotationAngle )
+                {
+                    Point aD1(rR.TopLeft());
+                    aD1-=aR0.TopLeft();
+                    Point aD2(aD1);
+                    RotatePoint(aD2,Point(),aGeo.nSin,aGeo.nCos);
+                    aD2-=aD1;
+                    rR.Move(aD2.X(),aD2.Y());
+                }
+                return true;
+            }
+        }
+    }
+    return false;
+}
+
+tools::Rectangle SdrObjCustomShape::ImpCalculateTextFrame( const bool bHgt, const bool bWdt )
+{
+    tools::Rectangle aReturnValue;
+
+    tools::Rectangle aOldTextRect( maRect );        // <- initial text rectangle
+
+    tools::Rectangle aNewTextRect( maRect );        // <- new text rectangle returned from the custom shape renderer,
+    GetTextBounds( aNewTextRect );          //    it depends to the current logical shape size
+
+    tools::Rectangle aAdjustedTextRect( aNewTextRect );                            // <- new text rectangle is being tested by AdjustTextFrameWidthAndHeight to ensure
+    if ( AdjustTextFrameWidthAndHeight( aAdjustedTextRect, bHgt, bWdt ) )   //    that the new text rectangle is matching the current text size from the outliner
+    {
+        if (aAdjustedTextRect != aNewTextRect && aOldTextRect != aAdjustedTextRect &&
+            aNewTextRect.GetWidth() && aNewTextRect.GetHeight())
+        {
+            aReturnValue = maRect;
+            double fXScale = static_cast<double>(aOldTextRect.GetWidth()) / static_cast<double>(aNewTextRect.GetWidth());
+            double fYScale = static_cast<double>(aOldTextRect.GetHeight()) / static_cast<double>(aNewTextRect.GetHeight());
+            double fRightDiff = static_cast<double>( aAdjustedTextRect.Right() - aNewTextRect.Right() ) * fXScale;
+            double fLeftDiff  = static_cast<double>( aAdjustedTextRect.Left()  - aNewTextRect.Left()  ) * fXScale;
+            double fTopDiff   = static_cast<double>( aAdjustedTextRect.Top()   - aNewTextRect.Top()   ) * fYScale;
+            double fBottomDiff= static_cast<double>( aAdjustedTextRect.Bottom()- aNewTextRect.Bottom()) * fYScale;
+            aReturnValue.AdjustLeft(static_cast<sal_Int32>(fLeftDiff) );
+            aReturnValue.AdjustRight(static_cast<sal_Int32>(fRightDiff) );
+            aReturnValue.AdjustTop(static_cast<sal_Int32>(fTopDiff) );
+            aReturnValue.AdjustBottom(static_cast<sal_Int32>(fBottomDiff) );
+        }
+    }
+    return aReturnValue;
+}
+
+bool SdrObjCustomShape::NbcAdjustTextFrameWidthAndHeight(bool bHgt, bool bWdt)
+{
+    tools::Rectangle aNewTextRect = ImpCalculateTextFrame(bHgt, bWdt);
+    const bool bRet = !aNewTextRect.IsEmpty() && aNewTextRect != maRect;
+    if (bRet && !mbAdjustingTextFrameWidthAndHeight)
+    {
+        mbAdjustingTextFrameWidthAndHeight = true;
+
+        // taking care of handles that should not been changed
+        std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() );
+
+        maRect = aNewTextRect;
+        SetRectsDirty();
+        SetChanged();
+
+        for (const auto& rInteraction : aInteractionHandles)
+        {
+            try
+            {
+                if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_FIXED )
+                    rInteraction.xInteraction->setControllerPosition( rInteraction.aPosition );
+            }
+            catch ( const uno::RuntimeException& )
+            {
+            }
+        }
+        InvalidateRenderGeometry();
+
+        mbAdjustingTextFrameWidthAndHeight = false;
+    }
+    return bRet;
+}
+
+bool SdrObjCustomShape::AdjustTextFrameWidthAndHeight()
+{
+    tools::Rectangle aNewTextRect = ImpCalculateTextFrame( true/*bHgt*/, true/*bWdt*/ );
+    bool bRet = !aNewTextRect.IsEmpty() && ( aNewTextRect != maRect );
+    if ( bRet )
+    {
+        tools::Rectangle aBoundRect0;
+        if ( pUserCall )
+            aBoundRect0 = GetCurrentBoundRect();
+
+        // taking care of handles that should not been changed
+        std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles() );
+
+        maRect = aNewTextRect;
+        SetRectsDirty();
+
+        for (const auto& rInteraction : aInteractionHandles)
+        {
+            try
+            {
+                if ( rInteraction.nMode & CustomShapeHandleModes::RESIZE_FIXED )
+                    rInteraction.xInteraction->setControllerPosition( rInteraction.aPosition );
+            }
+            catch ( const uno::RuntimeException& )
+            {
+            }
+        }
+
+        InvalidateRenderGeometry();
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+    return bRet;
+}
+void SdrObjCustomShape::TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, tools::Rectangle* pViewInit, tools::Rectangle* pViewMin) const
+{
+    Size aPaperMin,aPaperMax;
+    tools::Rectangle aViewInit;
+    TakeTextAnchorRect( aViewInit );
+    if ( aGeo.nRotationAngle )
+    {
+        Point aCenter(aViewInit.Center());
+        aCenter-=aViewInit.TopLeft();
+        Point aCenter0(aCenter);
+        RotatePoint(aCenter,Point(),aGeo.nSin,aGeo.nCos);
+        aCenter-=aCenter0;
+        aViewInit.Move(aCenter.X(),aCenter.Y());
+    }
+    Size aAnkSiz(aViewInit.GetSize());
+    aAnkSiz.AdjustWidth( -1 ); aAnkSiz.AdjustHeight( -1 ); // because GetSize() adds 1
+    Size aMaxSiz(1000000,1000000);
+    {
+        Size aTmpSiz(getSdrModelFromSdrObject().GetMaxObjSize());
+        if (aTmpSiz.Width()!=0) aMaxSiz.setWidth(aTmpSiz.Width() );
+        if (aTmpSiz.Height()!=0) aMaxSiz.setHeight(aTmpSiz.Height() );
+    }
+    SdrTextHorzAdjust eHAdj(GetTextHorizontalAdjust());
+    SdrTextVertAdjust eVAdj(GetTextVerticalAdjust());
+
+    long nMinWdt = GetMinTextFrameWidth();
+    long nMinHgt = GetMinTextFrameHeight();
+    long nMaxWdt = GetMaxTextFrameWidth();
+    long nMaxHgt = GetMaxTextFrameHeight();
+    if (nMinWdt<1) nMinWdt=1;
+    if (nMinHgt<1) nMinHgt=1;
+    if ( nMaxWdt == 0 || nMaxWdt > aMaxSiz.Width() )
+        nMaxWdt = aMaxSiz.Width();
+    if ( nMaxHgt == 0 || nMaxHgt > aMaxSiz.Height() )
+        nMaxHgt=aMaxSiz.Height();
+
+    if (GetMergedItem(SDRATTR_TEXT_WORDWRAP).GetValue())
+    {
+        if ( IsVerticalWriting() )
+        {
+            nMaxHgt = aAnkSiz.Height();
+            nMinHgt = nMaxHgt;
+        }
+        else
+        {
+            nMaxWdt = aAnkSiz.Width();
+            nMinWdt = nMaxWdt;
+        }
+    }
+    aPaperMax.setWidth(nMaxWdt );
+    aPaperMax.setHeight(nMaxHgt );
+
+    aPaperMin.setWidth(nMinWdt );
+    aPaperMin.setHeight(nMinHgt );
+
+    if ( pViewMin )
+    {
+        *pViewMin = aViewInit;
+
+        long nXFree = aAnkSiz.Width() - aPaperMin.Width();
+        if ( eHAdj == SDRTEXTHORZADJUST_LEFT )
+            pViewMin->AdjustRight( -nXFree );
+        else if ( eHAdj == SDRTEXTHORZADJUST_RIGHT )
+            pViewMin->AdjustLeft(nXFree );
+        else { pViewMin->AdjustLeft(nXFree / 2 ); pViewMin->SetRight( pViewMin->Left() + aPaperMin.Width() ); }
+
+        long nYFree = aAnkSiz.Height() - aPaperMin.Height();
+        if ( eVAdj == SDRTEXTVERTADJUST_TOP )
+            pViewMin->AdjustBottom( -nYFree );
+        else if ( eVAdj == SDRTEXTVERTADJUST_BOTTOM )
+            pViewMin->AdjustTop(nYFree );
+        else { pViewMin->AdjustTop(nYFree / 2 ); pViewMin->SetBottom( pViewMin->Top() + aPaperMin.Height() ); }
+    }
+
+    if( IsVerticalWriting() )
+        aPaperMin.setWidth( 0 );
+    else
+        aPaperMin.setHeight( 0 );
+
+    if( eHAdj != SDRTEXTHORZADJUST_BLOCK )
+        aPaperMin.setWidth(0 );
+
+    // For complete vertical adjust support, set paper min height to 0, here.
+    if(SDRTEXTVERTADJUST_BLOCK != eVAdj )
+        aPaperMin.setHeight( 0 );
+
+    if (pPaperMin!=nullptr) *pPaperMin=aPaperMin;
+    if (pPaperMax!=nullptr) *pPaperMax=aPaperMax;
+    if (pViewInit!=nullptr) *pViewInit=aViewInit;
+}
+void SdrObjCustomShape::EndTextEdit( SdrOutliner& rOutl )
+{
+    SdrTextObj::EndTextEdit( rOutl );
+    InvalidateRenderGeometry();
+}
+void SdrObjCustomShape::TakeTextAnchorRect( tools::Rectangle& rAnchorRect ) const
+{
+    if ( GetTextBounds( rAnchorRect ) )
+    {
+        Point aRotateRef( maSnapRect.Center() );
+        rAnchorRect.AdjustLeft(GetTextLeftDistance() );
+        rAnchorRect.AdjustTop(GetTextUpperDistance() );
+        rAnchorRect.AdjustRight( -(GetTextRightDistance()) );
+        rAnchorRect.AdjustBottom( -(GetTextLowerDistance()) );
+        ImpJustifyRect( rAnchorRect );
+
+        if ( rAnchorRect.GetWidth() < 2 )
+            rAnchorRect.SetRight( rAnchorRect.Left() + 1 );   // minimal width is 2
+        if ( rAnchorRect.GetHeight() < 2 )
+            rAnchorRect.SetBottom( rAnchorRect.Top() + 1 );   // minimal height is 2
+        if ( aGeo.nRotationAngle )
+        {
+            Point aP( rAnchorRect.TopLeft() );
+            RotatePoint( aP, aRotateRef, aGeo.nSin, aGeo. nCos );
+            rAnchorRect.SetPos( aP );
+        }
+    }
+    else
+        SdrTextObj::TakeTextAnchorRect( rAnchorRect );
+}
+void SdrObjCustomShape::TakeTextRect( SdrOutliner& rOutliner, tools::Rectangle& rTextRect, bool bNoEditText,
+                               tools::Rectangle* pAnchorRect, bool /*bLineWidth*/) const
+{
+    tools::Rectangle aAnkRect; // Rect in which we anchor
+    TakeTextAnchorRect(aAnkRect);
+    SdrTextVertAdjust eVAdj=GetTextVerticalAdjust();
+    SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust();
+    EEControlBits nStat0=rOutliner.GetControlWord();
+    Size aNullSize;
+
+    rOutliner.SetControlWord(nStat0|EEControlBits::AUTOPAGESIZE);
+    rOutliner.SetMinAutoPaperSize(aNullSize);
+    sal_Int32 nMaxAutoPaperWidth = 1000000;
+    sal_Int32 nMaxAutoPaperHeight= 1000000;
+
+    long nAnkWdt=aAnkRect.GetWidth();
+    long nAnkHgt=aAnkRect.GetHeight();
+
+    if (GetMergedItem(SDRATTR_TEXT_WORDWRAP).GetValue())
+    {
+        if ( IsVerticalWriting() )
+            nMaxAutoPaperHeight = nAnkHgt;
+        else
+            nMaxAutoPaperWidth = nAnkWdt;
+    }
+    if(SDRTEXTHORZADJUST_BLOCK == eHAdj && !IsVerticalWriting())
+    {
+        rOutliner.SetMinAutoPaperSize(Size(nAnkWdt, 0));
+    }
+
+    if(SDRTEXTVERTADJUST_BLOCK == eVAdj && IsVerticalWriting())
+    {
+        rOutliner.SetMinAutoPaperSize(Size(0, nAnkHgt));
+    }
+    rOutliner.SetMaxAutoPaperSize( Size( nMaxAutoPaperWidth, nMaxAutoPaperHeight ) );
+    rOutliner.SetPaperSize( aNullSize );
+
+    // put text into the Outliner - if necessary the use the text from the EditOutliner
+    OutlinerParaObject* pPara= GetOutlinerParaObject();
+    if (pEdtOutl && !bNoEditText)
+        pPara=pEdtOutl->CreateParaObject().release();
+
+    if (pPara)
+    {
+        bool bHitTest(&getSdrModelFromSdrObject().GetHitTestOutliner() == &rOutliner);
+        const SdrTextObj* pTestObj = rOutliner.GetTextObj();
+
+        if( !pTestObj || !bHitTest || pTestObj != this ||
+            pTestObj->GetOutlinerParaObject() != GetOutlinerParaObject() )
+        {
+            if( bHitTest )
+                rOutliner.SetTextObj( this );
+
+            rOutliner.SetUpdateMode(true);
+            rOutliner.SetText(*pPara);
+        }
+    }
+    else
+    {
+        rOutliner.SetTextObj( nullptr );
+    }
+    if (pEdtOutl && !bNoEditText && pPara)
+        delete pPara;
+
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetControlWord(nStat0);
+
+    SdrText* pText = getActiveText();
+    if( pText )
+        pText->CheckPortionInfo( rOutliner );
+
+    Point aTextPos(aAnkRect.TopLeft());
+    Size aTextSiz(rOutliner.GetPaperSize()); // GetPaperSize() has a little added tolerance, no?
+
+    // For draw objects containing text correct horizontal/vertical alignment if text is bigger
+    // than the object itself. Without that correction, the text would always be
+    // formatted to the left edge (or top edge when vertical) of the draw object.
+
+    if( !IsTextFrame() )
+    {
+        if(aAnkRect.GetWidth() < aTextSiz.Width() && !IsVerticalWriting())
+        {
+            // Horizontal case here. Correct only if eHAdj == SDRTEXTHORZADJUST_BLOCK,
+            // else the alignment is wanted.
+            if(SDRTEXTHORZADJUST_BLOCK == eHAdj)
+            {
+                SvxAdjust eAdjust = GetObjectItemSet().Get(EE_PARA_JUST).GetAdjust();
+                switch (eAdjust)
+                {
+                    case SvxAdjust::Left:   eHAdj = SDRTEXTHORZADJUST_LEFT; break;
+                    case SvxAdjust::Right:  eHAdj = SDRTEXTHORZADJUST_RIGHT; break;
+                    case SvxAdjust::Center: eHAdj = SDRTEXTHORZADJUST_CENTER; break;
+                    default: break;
+                }
+            }
+        }
+
+        if(aAnkRect.GetHeight() < aTextSiz.Height() && IsVerticalWriting())
+        {
+            // Vertical case here. Correct only if eHAdj == SDRTEXTVERTADJUST_BLOCK,
+            // else the alignment is wanted.
+            if(SDRTEXTVERTADJUST_BLOCK == eVAdj)
+            {
+                eVAdj = SDRTEXTVERTADJUST_CENTER;
+            }
+        }
+    }
+
+    if (eHAdj==SDRTEXTHORZADJUST_CENTER || eHAdj==SDRTEXTHORZADJUST_RIGHT)
+    {
+        long nFreeWdt=aAnkRect.GetWidth()-aTextSiz.Width();
+        if (eHAdj==SDRTEXTHORZADJUST_CENTER)
+            aTextPos.AdjustX(nFreeWdt/2 );
+        if (eHAdj==SDRTEXTHORZADJUST_RIGHT)
+            aTextPos.AdjustX(nFreeWdt );
+    }
+    if (eVAdj==SDRTEXTVERTADJUST_CENTER || eVAdj==SDRTEXTVERTADJUST_BOTTOM)
+    {
+        long nFreeHgt=aAnkRect.GetHeight()-aTextSiz.Height();
+        if (eVAdj==SDRTEXTVERTADJUST_CENTER)
+            aTextPos.AdjustY(nFreeHgt/2 );
+        if (eVAdj==SDRTEXTVERTADJUST_BOTTOM)
+            aTextPos.AdjustY(nFreeHgt );
+    }
+    if (aGeo.nRotationAngle!=0)
+        RotatePoint(aTextPos,aAnkRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+
+    if (pAnchorRect)
+        *pAnchorRect=aAnkRect;
+
+    // using rTextRect together with ContourFrame doesn't always work correctly
+    rTextRect=tools::Rectangle(aTextPos,aTextSiz);
+}
+
+void SdrObjCustomShape::NbcSetOutlinerParaObject(std::unique_ptr<OutlinerParaObject> pTextObject)
+{
+    SdrTextObj::NbcSetOutlinerParaObject( std::move(pTextObject) );
+    SetBoundRectDirty();
+    SetRectsDirty(true);
+    InvalidateRenderGeometry();
+}
+
+SdrObjCustomShape* SdrObjCustomShape::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrObjCustomShape >(rTargetModel);
+}
+
+SdrObjCustomShape& SdrObjCustomShape::operator=(const SdrObjCustomShape& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrTextObj::operator=( rObj );
+    fObjectRotation = rObj.fObjectRotation;
+    mbAdjustingTextFrameWidthAndHeight = rObj.mbAdjustingTextFrameWidthAndHeight;
+    assert(!mbAdjustingTextFrameWidthAndHeight);
+    InvalidateRenderGeometry();
+    return *this;
+}
+
+
+OUString SdrObjCustomShape::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulCUSTOMSHAPE));
+    OUString aNm(GetName());
+    if (!aNm.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aNm);
+        sName.append('\'');
+    }
+    return sName.makeStringAndClear();
+}
+
+OUString SdrObjCustomShape::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralCUSTOMSHAPE);
+}
+
+basegfx::B2DPolyPolygon SdrObjCustomShape::TakeXorPoly() const
+{
+    return GetLineGeometry( false );
+}
+
+basegfx::B2DPolyPolygon SdrObjCustomShape::TakeContour() const
+{
+    const SdrObject* pSdrObject = GetSdrObjectFromCustomShape();
+    if ( pSdrObject )
+        return pSdrObject->TakeContour();
+    return basegfx::B2DPolyPolygon();
+}
+
+SdrObjectUniquePtr SdrObjCustomShape::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    // #i37011#
+    SdrObjectUniquePtr pRetval;
+    SdrObject* pRenderedCustomShape = nullptr;
+
+    if ( !mXRenderedCustomShape.is() )
+    {
+        // force CustomShape
+        GetSdrObjectFromCustomShape();
+    }
+
+    if ( mXRenderedCustomShape.is() )
+    {
+        pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape );
+    }
+
+    if ( pRenderedCustomShape )
+    {
+        // Clone to same SdrModel
+        SdrObject* pCandidate(pRenderedCustomShape->CloneSdrObject(pRenderedCustomShape->getSdrModelFromSdrObject()));
+        DBG_ASSERT(pCandidate, "SdrObjCustomShape::DoConvertToPolyObj: Could not clone SdrObject (!)");
+        pRetval = pCandidate->DoConvertToPolyObj(bBezier, bAddText);
+        SdrObject::Free( pCandidate );
+
+        if(pRetval)
+        {
+            const bool bShadow(GetMergedItem(SDRATTR_SHADOW).GetValue());
+            if(bShadow)
+            {
+                pRetval->SetMergedItem(makeSdrShadowItem(true));
+            }
+        }
+
+        if(bAddText && HasText() && !IsTextPath())
+        {
+            pRetval = ImpConvertAddText(std::move(pRetval), bBezier);
+        }
+    }
+
+    return pRetval;
+}
+
+void SdrObjCustomShape::NbcSetStyleSheet( SfxStyleSheet* pNewStyleSheet, bool bDontRemoveHardAttr )
+{
+    // #i40944#
+    InvalidateRenderGeometry();
+    SdrObject::NbcSetStyleSheet( pNewStyleSheet, bDontRemoveHardAttr );
+}
+
+void SdrObjCustomShape::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage)
+{
+    // call parent
+    SdrTextObj::handlePageChange(pOldPage, pNewPage);
+
+    if(nullptr != pNewPage)
+    {
+        // invalidating rectangles by SetRectsDirty is not sufficient,
+        // AdjustTextFrameWidthAndHeight() also has to be made, both
+        // actions are done by NbcSetSnapRect
+        tools::Rectangle aTmp( maRect );    //creating temporary rectangle #i61108#
+        NbcSetSnapRect( aTmp );
+    }
+}
+
+SdrObjGeoData* SdrObjCustomShape::NewGeoData() const
+{
+    return new SdrAShapeObjGeoData;
+}
+
+void SdrObjCustomShape::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrTextObj::SaveGeoData( rGeo );
+    SdrAShapeObjGeoData& rAGeo=static_cast<SdrAShapeObjGeoData&>(rGeo);
+    rAGeo.fObjectRotation = fObjectRotation;
+    rAGeo.bMirroredX = IsMirroredX();
+    rAGeo.bMirroredY = IsMirroredY();
+
+    const OUString sAdjustmentValues( "AdjustmentValues" );
+    const Any* pAny = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ).GetPropertyValueByName( sAdjustmentValues );
+    if ( pAny )
+        *pAny >>= rAGeo.aAdjustmentSeq;
+}
+
+void SdrObjCustomShape::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrTextObj::RestGeoData( rGeo );
+    const SdrAShapeObjGeoData& rAGeo=static_cast<const SdrAShapeObjGeoData&>(rGeo);
+    fObjectRotation = rAGeo.fObjectRotation;
+    SetMirroredX( rAGeo.bMirroredX );
+    SetMirroredY( rAGeo.bMirroredY );
+
+    SdrCustomShapeGeometryItem rGeometryItem = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY );
+    const OUString sAdjustmentValues( "AdjustmentValues" );
+    PropertyValue aPropVal;
+    aPropVal.Name = sAdjustmentValues;
+    aPropVal.Value <<= rAGeo.aAdjustmentSeq;
+    rGeometryItem.SetPropertyValue( aPropVal );
+    SetMergedItem( rGeometryItem );
+
+    InvalidateRenderGeometry();
+}
+
+void SdrObjCustomShape::AdjustToMaxRect(const tools::Rectangle& rMaxRect, bool bShrinkOnly /* = false */)
+{
+    SAL_INFO_IF(bShrinkOnly, "svx", "Case bShrinkOnly == true is not implemented yet.");
+
+    if (rMaxRect.IsEmpty() || rMaxRect == GetSnapRect())
+        return;
+
+    // Get a matrix, that would produce the existing shape, when applied to a unit square
+    basegfx::B2DPolyPolygon aPolyPolygon; //not used, but formal needed
+    basegfx::B2DHomMatrix aMatrix;
+    TRGetBaseGeometry(aMatrix, aPolyPolygon);
+    // Using TRSetBaseGeometry(aMatrix, aPolyPolygon) would regenerate the current shape. But
+    // applying aMatrix to a unit square will not generate the current shape. Scaling,
+    // rotation and translation are correct, but shear angle has wrong sign. So break up
+    // matrix and create a mathematically correct new one.
+    basegfx::B2DTuple aScale;
+    basegfx::B2DTuple aTranslate;
+    double fRotate, fShearX;
+    aMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+    basegfx::B2DHomMatrix aMathMatrix;
+    aMathMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+            aScale,
+            basegfx::fTools::equalZero(fShearX) ? 0.0 : -fShearX,
+            basegfx::fTools::equalZero(fRotate) ? 0.0 : fRotate,
+            aTranslate);
+
+    // Calculate scaling factors from size of the transformed unit polygon as ersatz for the not
+    // usable current snap rectangle.
+    basegfx::B2DPolygon aB2DPolygon(basegfx::utils::createUnitPolygon());
+    aB2DPolygon.transform(aMathMatrix);
+    basegfx::B2DRange aB2DRange(aB2DPolygon.getB2DRange());
+    double fPolygonWidth = aB2DRange.getWidth();
+    if (fPolygonWidth == 0)
+        fPolygonWidth = 1;
+    double fPolygonHeight = aB2DRange.getHeight();
+    if (fPolygonHeight == 0)
+        fPolygonHeight = 1;
+    const double aFactorX = static_cast<double>(rMaxRect.GetWidth()) / fPolygonWidth;
+    const double aFactorY = static_cast<double>(rMaxRect.GetHeight()) / fPolygonHeight;
+
+    // Generate matrix, that would produce the desired rMaxRect when applied to unit square
+    aMathMatrix.scale(aFactorX, aFactorY);
+    aB2DPolygon = basegfx::utils::createUnitPolygon();
+    aB2DPolygon.transform(aMathMatrix);
+    aB2DRange = aB2DPolygon.getB2DRange();
+    const double fPolygonLeft = aB2DRange.getMinX();
+    const double fPolygonTop = aB2DRange.getMinY();
+    aMathMatrix.translate(rMaxRect.getX() - fPolygonLeft, rMaxRect.getY() - fPolygonTop);
+
+    // Create a Matrix from aMathMatrix, which is usable with TRSetBaseGeometry
+    aMathMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+    aMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+            aScale,
+            basegfx::fTools::equalZero(fShearX) ? 0.0 : -fShearX,
+            basegfx::fTools::equalZero(fRotate) ? 0.0 : fRotate,
+            aTranslate);
+
+    // Now use TRSetBaseGeometry to actually perform scale, shear, rotate and translate
+    // on the shape. That considers gluepoints, interaction handles and text area, and includes
+    // setting rectangles dirty and broadcast.
+    TRSetBaseGeometry(aMatrix, aPolyPolygon);
+}
+
+void SdrObjCustomShape::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/)
+{
+    // The shape might have already flipping in its enhanced geometry. LibreOffice applies
+    // such after all transformations. We remove it, but remember it to apply them later.
+    bool bIsMirroredX = IsMirroredX();
+    bool bIsMirroredY = IsMirroredY();
+    if (bIsMirroredX || bIsMirroredY)
+    {
+        Point aCurrentCenter = GetSnapRect().Center();
+        if (bIsMirroredX) // mirror on the y-axis
+        {
+            Mirror(aCurrentCenter, Point(aCurrentCenter.X(), aCurrentCenter.Y() + 1000));
+        }
+        if (bIsMirroredY) // mirror on the x-axis
+        {
+            Mirror(aCurrentCenter, Point(aCurrentCenter.X() + 1000, aCurrentCenter.Y()));
+        }
+    }
+
+    // break up matrix
+    basegfx::B2DTuple aScale;
+    basegfx::B2DTuple aTranslate;
+    double fRotate, fShearX;
+    rMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // reset object shear and rotations
+    fObjectRotation = 0.0;
+    aGeo.nRotationAngle = 0;
+    aGeo.RecalcSinCos();
+    aGeo.nShearAngle = 0;
+    aGeo.RecalcTan();
+
+    // if anchor is used, make position relative to it
+    if(getSdrModelFromSdrObject().IsWriter())
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // scale
+    Size aSize(FRound(fabs(aScale.getX())), FRound(fabs(aScale.getY())));
+    // fdo#47434 We need a valid rectangle here
+    if( !aSize.Height() ) aSize.setHeight( 1 );
+    if( !aSize.Width() ) aSize.setWidth( 1 );
+    tools::Rectangle aBaseRect(Point(), aSize);
+    SetLogicRect(aBaseRect);
+
+    // Apply flipping from Matrix, which is a transformation relative to origin
+    if (basegfx::fTools::less(aScale.getX(), 0.0))
+        Mirror(Point(0, 0), Point(0, 1000)); // mirror on the y-axis
+    if (basegfx::fTools::less(aScale.getY(), 0.0))
+        Mirror(Point(0, 0), Point(1000, 0)); // mirror on the x-axis
+
+    // shear?
+    if(!basegfx::fTools::equalZero(fShearX))
+    {
+        GeoStat aGeoStat;
+        // #i123181# The fix for #121932# here was wrong, the trunk version does not correct the
+        // mirrored shear values, neither at the object level, nor on the API or XML level. Taking
+        // back the mirroring of the shear angle
+        aGeoStat.nShearAngle = FRound(basegfx::rad2deg(atan(fShearX)) * 100.0);
+        aGeoStat.RecalcTan();
+        Shear(Point(), aGeoStat.nShearAngle, aGeoStat.nTan, false);
+    }
+
+    // rotation?
+    if(!basegfx::fTools::equalZero(fRotate))
+    {
+        GeoStat aGeoStat;
+
+        // #i78696#
+        // fRotate is mathematically correct, but aGeoStat.nRotationAngle is
+        // mirrored -> mirror value here
+        aGeoStat.nRotationAngle = NormAngle36000(FRound(-fRotate / F_PI18000));
+        aGeoStat.RecalcSinCos();
+        Rotate(Point(), aGeoStat.nRotationAngle, aGeoStat.nSin, aGeoStat.nCos);
+    }
+
+    // translate?
+    if(!aTranslate.equalZero())
+    {
+        Move(Size(FRound(aTranslate.getX()), FRound(aTranslate.getY())));
+    }
+
+    // Apply flipping from enhanced geometry at center of the shape.
+    if (bIsMirroredX || bIsMirroredY)
+    {
+        // create mathematically matrix for the applied transformations
+        // aScale was in most cases built from a rectangle including edge
+        // and is therefore mathematically too large by 1
+        if (aScale.getX() > 2.0 && aScale.getY() > 2.0)
+            aScale -= basegfx::B2DTuple(1.0, 1.0);
+        basegfx::B2DHomMatrix aMathMat = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+                        aScale, -fShearX, basegfx::fTools::equalZero(fRotate) ? 0.0 : fRotate,
+                        aTranslate);
+        // Use matrix to get current center
+        basegfx::B2DPoint aCenter(0.5,0.5);
+        aCenter = aMathMat * aCenter;
+        double fCenterX = aCenter.getX();
+        double fCenterY = aCenter.getY();
+        if (bIsMirroredX) // vertical axis
+            Mirror(Point(FRound(fCenterX),FRound(fCenterY)),
+                Point(FRound(fCenterX), FRound(fCenterY + 1000.0)));
+        if (bIsMirroredY) // horizontal axis
+            Mirror(Point(FRound(fCenterX),FRound(fCenterY)),
+                Point(FRound(fCenterX + 1000.0), FRound(fCenterY)));
+    }
+}
+
+// taking fObjectRotation instead of aGeo.nAngle
+bool SdrObjCustomShape::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const
+{
+    // get turn and shear
+    double fRotate = basegfx::deg2rad(fObjectRotation);
+    double fShearX = basegfx::deg2rad(aGeo.nShearAngle / 100.0);
+
+    // get aRect, this is the unrotated snaprect
+    tools::Rectangle aRectangle(maRect);
+
+    bool bMirroredX = IsMirroredX();
+    bool bMirroredY = IsMirroredY();
+    if ( bMirroredX || bMirroredY )
+    {   // we have to retrieve the unmirrored rect
+
+        GeoStat aNewGeo( aGeo );
+
+        if ( bMirroredX )
+        {
+            fShearX = -fShearX;
+            tools::Polygon aPol = Rect2Poly(maRect, aNewGeo);
+            tools::Rectangle aBoundRect( aPol.GetBoundRect() );
+
+            Point aRef1( ( aBoundRect.Left() + aBoundRect.Right() ) >> 1, aBoundRect.Top() );
+            Point aRef2( aRef1.X(), aRef1.Y() + 1000 );
+            sal_uInt16 i;
+            sal_uInt16 nPointCount=aPol.GetSize();
+            for (i=0; i<nPointCount; i++)
+            {
+                MirrorPoint(aPol[i],aRef1,aRef2);
+            }
+            // mirror polygon and move it a bit
+            tools::Polygon aPol0(aPol);
+            aPol[0]=aPol0[1];
+            aPol[1]=aPol0[0];
+            aPol[2]=aPol0[3];
+            aPol[3]=aPol0[2];
+            aPol[4]=aPol0[1];
+            Poly2Rect(aPol,aRectangle,aNewGeo);
+        }
+        if ( bMirroredY )
+        {
+            fShearX = -fShearX;
+            tools::Polygon aPol( Rect2Poly( aRectangle, aNewGeo ) );
+            tools::Rectangle aBoundRect( aPol.GetBoundRect() );
+
+            Point aRef1( aBoundRect.Left(), ( aBoundRect.Top() + aBoundRect.Bottom() ) >> 1 );
+            Point aRef2( aRef1.X() + 1000, aRef1.Y() );
+            sal_uInt16 i;
+            sal_uInt16 nPointCount=aPol.GetSize();
+            for (i=0; i<nPointCount; i++)
+            {
+                MirrorPoint(aPol[i],aRef1,aRef2);
+            }
+            // mirror polygon and move it a bit
+            tools::Polygon aPol0(aPol);
+            aPol[0]=aPol0[1]; // This was WRONG for vertical (!)
+            aPol[1]=aPol0[0]; // #i121932# Despite my own comment above
+            aPol[2]=aPol0[3]; // it was *not* wrong even when the reordering
+            aPol[3]=aPol0[2]; // *seems* to be specific for X-Mirrorings. Oh
+            aPol[4]=aPol0[1]; // will I be happy when this old stuff is |gone| with aw080 (!)
+            Poly2Rect(aPol,aRectangle,aNewGeo);
+        }
+    }
+
+    // fill other values
+    basegfx::B2DTuple aScale(aRectangle.GetWidth(), aRectangle.GetHeight());
+    basegfx::B2DTuple aTranslate(aRectangle.Left(), aRectangle.Top());
+
+    // position may be relative to anchorpos, convert
+    if(getSdrModelFromSdrObject().IsWriter())
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build matrix
+    rMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+        aScale,
+        basegfx::fTools::equalZero(fShearX) ? 0.0 : tan(fShearX),
+        basegfx::fTools::equalZero(fRotate) ? 0.0 : -fRotate,
+        aTranslate);
+
+    return false;
+}
+
+std::unique_ptr<sdr::contact::ViewContact> SdrObjCustomShape::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrObjCustomShape>(*this);
+}
+
+// #i33136#
+bool SdrObjCustomShape::doConstructOrthogonal(const OUString& rName)
+{
+    bool bRetval(false);
+
+    if(rName.equalsIgnoreAsciiCase("quadrat"))
+    {
+        bRetval = true;
+    }
+    else if(rName.equalsIgnoreAsciiCase("round-quadrat"))
+    {
+        bRetval = true;
+    }
+    else if(rName.equalsIgnoreAsciiCase("circle"))
+    {
+        bRetval = true;
+    }
+    else if(rName.equalsIgnoreAsciiCase("circle-pie"))
+    {
+        bRetval = true;
+    }
+    else if(rName.equalsIgnoreAsciiCase("ring"))
+    {
+        bRetval = true;
+    }
+
+    return bRetval;
+}
+
+// #i37011# centralize throw-away of render geometry
+void SdrObjCustomShape::InvalidateRenderGeometry()
+{
+    mXRenderedCustomShape = nullptr;
+    SdrObject::Free( mpLastShadowGeometry );
+    mpLastShadowGeometry = nullptr;
+}
+
+void SdrObjCustomShape::impl_setUnoShape(const uno::Reference<uno::XInterface>& rxUnoShape)
+{
+    SdrTextObj::impl_setUnoShape(rxUnoShape);
+
+    // The shape engine is created with _current_ shape. This means we
+    // _must_ reset it when the shape changes.
+    mxCustomShapeEngine.set(nullptr);
+}
+
+OUString SdrObjCustomShape::GetCustomShapeName() const
+{
+    OUString sShapeName;
+    OUString aEngine( GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE ).GetValue() );
+    if ( aEngine.isEmpty()
+         || aEngine == "com.sun.star.drawing.EnhancedCustomShapeEngine" )
+    {
+        OUString sShapeType;
+        const OUString sType("Type");
+        const SdrCustomShapeGeometryItem& rGeometryItem( GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+        const Any* pAny = rGeometryItem.GetPropertyValueByName( sType );
+        if ( pAny && ( *pAny >>= sShapeType ) )
+            sShapeName = EnhancedCustomShapeTypeNames::GetAccName( sShapeType );
+    }
+    return sShapeName;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdoattr.cxx b/svx/source/svdraw/svdoattr.cxx
new file mode 100644
index 000000000..2c7223fa5
--- /dev/null
+++ b/svx/source/svdraw/svdoattr.cxx
@@ -0,0 +1,99 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdoattr.hxx>
+#include <svx/svdmodel.hxx>
+#include <svl/hint.hxx>
+#include <svl/itemset.hxx>
+#include <svx/xdef.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xlnwtit.hxx>
+#include <sdr/properties/attributeproperties.hxx>
+
+using namespace com::sun::star;
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrAttrObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::AttributeProperties>(*this);
+}
+
+
+SdrAttrObj::SdrAttrObj(SdrModel& rSdrModel)
+:   SdrObject(rSdrModel)
+{
+}
+
+SdrAttrObj::~SdrAttrObj()
+{
+}
+
+const tools::Rectangle& SdrAttrObj::GetSnapRect() const
+{
+    if(bSnapRectDirty)
+    {
+        const_cast<SdrAttrObj*>(this)->RecalcSnapRect();
+        const_cast<SdrAttrObj*>(this)->bSnapRectDirty = false;
+    }
+
+    return maSnapRect;
+}
+
+// syntactical sugar for ItemSet accesses
+void SdrAttrObj::Notify(SfxBroadcaster& /*rBC*/, const SfxHint& rHint)
+{
+    bool bDataChg(SfxHintId::DataChanged == rHint.GetId());
+
+    if(bDataChg)
+    {
+        tools::Rectangle aBoundRect = GetLastBoundRect();
+        SetBoundRectDirty();
+        SetRectsDirty(true);
+
+        // This may have led to object change
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::ChangeAttr, aBoundRect);
+    }
+}
+
+sal_Int32 SdrAttrObj::ImpGetLineWdt() const
+{
+    sal_Int32 nRetval(0);
+
+    if(drawing::LineStyle_NONE != GetObjectItem(XATTR_LINESTYLE).GetValue())
+    {
+        nRetval = GetObjectItem(XATTR_LINEWIDTH).GetValue();
+    }
+
+    return nRetval;
+}
+
+bool SdrAttrObj::HasFill() const
+{
+    return bClosedObj && GetProperties().GetObjectItemSet().Get(XATTR_FILLSTYLE).GetValue() != drawing::FillStyle_NONE;
+}
+
+bool SdrAttrObj::HasLine() const
+{
+    return GetProperties().GetObjectItemSet().Get(XATTR_LINESTYLE).GetValue() != drawing::LineStyle_NONE;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdobj.cxx b/svx/source/svdraw/svdobj.cxx
new file mode 100644
index 000000000..7b1b5cc5d
--- /dev/null
+++ b/svx/source/svdraw/svdobj.cxx
@@ -0,0 +1,3213 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdobj.hxx>
+#include <config_features.h>
+
+#include <sal/config.h>
+#include <sal/log.hxx>
+#include <rtl/ustrbuf.hxx>
+
+#include <com/sun/star/lang/XComponent.hpp>
+#include <com/sun/star/text/RelOrientation.hpp>
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/polygon/b2dpolypolygoncutter.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <drawinglayer/processor2d/contourextractor2d.hxx>
+#include <drawinglayer/processor2d/linegeometryextractor2d.hxx>
+#include <editeng/editeng.hxx>
+#include <editeng/outlobj.hxx>
+#include <o3tl/deleter.hxx>
+#include <math.h>
+#include <svl/grabbagitem.hxx>
+#include <tools/bigint.hxx>
+#include <tools/diagnose_ex.h>
+#include <tools/helpers.hxx>
+#include <unotools/configmgr.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/ptrstyle.hxx>
+#include <vector>
+
+#include <svx/shapepropertynotifier.hxx>
+#include <svx/svdotable.hxx>
+
+#include <svx/sdr/contact/displayinfo.hxx>
+#include <sdr/contact/objectcontactofobjlistpainter.hxx>
+#include <svx/sdr/contact/viewcontactofsdrobj.hxx>
+#include <sdr/properties/emptyproperties.hxx>
+#include <svx/sdrhittesthelper.hxx>
+#include <svx/sdrobjectuser.hxx>
+#include <svx/sdrobjectfilter.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svdetc.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/svditer.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/svdocapt.hxx>
+#include <svx/svdocirc.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/svdomeas.hxx>
+#include <svx/svdomedia.hxx>
+#include <svx/svdoole2.hxx>
+#include <svx/svdopage.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdorect.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdouno.hxx>
+#include <svx/svdovirt.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpool.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdview.hxx>
+#include <sxlayitm.hxx>
+#include <sxlogitm.hxx>
+#include <sxmovitm.hxx>
+#include <sxoneitm.hxx>
+#include <sxopitm.hxx>
+#include <sxreoitm.hxx>
+#include <sxrooitm.hxx>
+#include <sxsaitm.hxx>
+#include <sxsoitm.hxx>
+#include <sxtraitm.hxx>
+#include <svx/unopage.hxx>
+#include <svx/unoshape.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xfltrit.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xlnedwit.hxx>
+#include <svx/xlnstwit.hxx>
+#include <svx/xlntrit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/svdglue.hxx>
+#include <svx/svdsob.hxx>
+#include <svdobjplusdata.hxx>
+#include <svdobjuserdatalist.hxx>
+
+#include <unordered_set>
+
+#include <optional>
+#include <libxml/xmlwriter.h>
+#include <memory>
+
+using namespace ::com::sun::star;
+
+
+SdrObjUserCall::~SdrObjUserCall()
+{
+}
+
+void SdrObjUserCall::Changed(const SdrObject& /*rObj*/, SdrUserCallType /*eType*/, const tools::Rectangle& /*rOldBoundRect*/)
+{
+}
+
+SdrObjMacroHitRec::SdrObjMacroHitRec() :
+    pVisiLayer(nullptr),
+    pPageView(nullptr),
+    nTol(0) {}
+
+
+SdrObjUserData::SdrObjUserData(SdrInventor nInv, sal_uInt16 nId) :
+    nInventor(nInv),
+    nIdentifier(nId) {}
+
+SdrObjUserData::SdrObjUserData(const SdrObjUserData& rData) :
+    nInventor(rData.nInventor),
+    nIdentifier(rData.nIdentifier) {}
+
+SdrObjUserData::~SdrObjUserData() {}
+
+SdrObjGeoData::SdrObjGeoData():
+    bMovProt(false),
+    bSizProt(false),
+    bNoPrint(false),
+    bClosedObj(false),
+    mbVisible(true),
+    mnLayerID(0)
+{
+}
+
+SdrObjGeoData::~SdrObjGeoData()
+{
+}
+
+SdrObjTransformInfoRec::SdrObjTransformInfoRec() :
+    bMoveAllowed(true),
+    bResizeFreeAllowed(true),
+    bResizePropAllowed(true),
+    bRotateFreeAllowed(true),
+    bRotate90Allowed(true),
+    bMirrorFreeAllowed(true),
+    bMirror45Allowed(true),
+    bMirror90Allowed(true),
+    bTransparenceAllowed(true),
+    bShearAllowed(true),
+    bEdgeRadiusAllowed(true),
+    bNoOrthoDesired(true),
+    bNoContortion(true),
+    bCanConvToPath(true),
+    bCanConvToPoly(true),
+    bCanConvToContour(false),
+    bCanConvToPathLineToArea(true),
+    bCanConvToPolyLineToArea(true) {}
+
+struct SdrObject::Impl
+{
+    sdr::ObjectUserVector maObjectUsers;
+    std::shared_ptr<DiagramDataInterface> mpDiagramData;
+    std::optional<double> mnRelativeWidth;
+    std::optional<double> mnRelativeHeight;
+    sal_Int16               meRelativeWidthRelation;
+    sal_Int16               meRelativeHeightRelation;
+
+    Impl() :
+        meRelativeWidthRelation(text::RelOrientation::PAGE_FRAME),
+        meRelativeHeightRelation(text::RelOrientation::PAGE_FRAME) {}
+};
+
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrObject::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::EmptyProperties>(*this);
+}
+
+sdr::properties::BaseProperties& SdrObject::GetProperties() const
+{
+    if(!mpProperties)
+    {
+        // CAUTION(!) Do *not* call this during SdrObject construction,
+        // that will lead to wrong type-casts (dependent on constructor-level)
+        // and thus eventually create the wrong sdr::properties (!). Is there
+        // a way to check if on the stack is a SdrObject-constructor (?)
+        const_cast< SdrObject* >(this)->mpProperties =
+            const_cast< SdrObject* >(this)->CreateObjectSpecificProperties();
+    }
+
+    return *mpProperties;
+}
+
+
+// ObjectUser section
+
+void SdrObject::AddObjectUser(sdr::ObjectUser& rNewUser)
+{
+    mpImpl->maObjectUsers.push_back(&rNewUser);
+}
+
+void SdrObject::RemoveObjectUser(sdr::ObjectUser& rOldUser)
+{
+    const sdr::ObjectUserVector::iterator aFindResult =
+        std::find(mpImpl->maObjectUsers.begin(), mpImpl->maObjectUsers.end(), &rOldUser);
+    if (aFindResult != mpImpl->maObjectUsers.end())
+    {
+        mpImpl->maObjectUsers.erase(aFindResult);
+    }
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrObject::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrObj>(*this);
+}
+
+sdr::contact::ViewContact& SdrObject::GetViewContact() const
+{
+    if(!mpViewContact)
+    {
+        const_cast< SdrObject* >(this)->mpViewContact =
+            const_cast< SdrObject* >(this)->CreateObjectSpecificViewContact();
+    }
+
+    return *mpViewContact;
+}
+
+// DrawContact support: Methods for handling Object changes
+void SdrObject::ActionChanged() const
+{
+    // Do necessary ViewContact actions
+    GetViewContact().ActionChanged();
+}
+
+SdrPage* SdrObject::getSdrPageFromSdrObject() const
+{
+    if(getParentSdrObjListFromSdrObject())
+    {
+        return getParentSdrObjListFromSdrObject()->getSdrPageFromSdrObjList();
+    }
+
+    return nullptr;
+}
+
+SdrModel& SdrObject::getSdrModelFromSdrObject() const
+{
+    return mrSdrModelFromSdrObject;
+}
+
+void SdrObject::setParentOfSdrObject(SdrObjList* pNewObjList)
+{
+    if(getParentSdrObjListFromSdrObject() != pNewObjList)
+    {
+        // remember current page
+        SdrPage* pOldPage(getSdrPageFromSdrObject());
+
+        // set new parent
+        mpParentOfSdrObject = pNewObjList;
+
+        // get new page
+        SdrPage* pNewPage(getSdrPageFromSdrObject());
+
+        // broadcast page change over objects if needed
+        if(pOldPage != pNewPage)
+        {
+            handlePageChange(pOldPage, pNewPage);
+        }
+    }
+}
+
+SdrObjList* SdrObject::getParentSdrObjListFromSdrObject() const
+{
+    return mpParentOfSdrObject;
+}
+
+SdrObjList* SdrObject::getChildrenOfSdrObject() const
+{
+    // default has no children
+    return nullptr;
+}
+
+void SdrObject::SetBoundRectDirty()
+{
+    aOutRect = tools::Rectangle();
+}
+
+#ifdef DBG_UTIL
+// SdrObjectLifetimeWatchDog:
+void impAddIncarnatedSdrObjectToSdrModel(const SdrObject& rSdrObject, SdrModel& rSdrModel)
+{
+    rSdrModel.maAllIncarnatedObjects.insert(&rSdrObject);
+}
+void impRemoveIncarnatedSdrObjectToSdrModel(const SdrObject& rSdrObject, SdrModel& rSdrModel)
+{
+    if(!rSdrModel.maAllIncarnatedObjects.erase(&rSdrObject))
+    {
+        SAL_WARN("svx","SdrObject::~SdrObject: Destructed incarnation of SdrObject not member of this SdrModel (!)");
+    }
+}
+#endif
+
+SdrObject::SdrObject(SdrModel& rSdrModel)
+:   mpFillGeometryDefiningShape(nullptr)
+    ,mrSdrModelFromSdrObject(rSdrModel)
+    ,pUserCall(nullptr)
+    ,mpImpl(new Impl)
+    ,mpParentOfSdrObject(nullptr)
+    ,nOrdNum(0)
+    ,mnNavigationPosition(SAL_MAX_UINT32)
+    ,mnLayerID(0)
+    ,mpSvxShape( nullptr )
+    ,maWeakUnoShape()
+    ,mbDoNotInsertIntoPageAutomatically(false)
+{
+    bVirtObj         =false;
+    bSnapRectDirty   =true;
+    bMovProt         =false;
+    bSizProt         =false;
+    bNoPrint         =false;
+    bEmptyPresObj    =false;
+    bNotVisibleAsMaster=false;
+    bClosedObj       =false;
+    mbVisible        = true;
+
+    // #i25616#
+    mbLineIsOutsideGeometry = false;
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = false;
+
+    bIsEdge=false;
+    bIs3DObj=false;
+    bMarkProt=false;
+    bIsUnoObj=false;
+#ifdef DBG_UTIL
+    // SdrObjectLifetimeWatchDog:
+    impAddIncarnatedSdrObjectToSdrModel(*this, getSdrModelFromSdrObject());
+#endif
+}
+
+SdrObject::~SdrObject()
+{
+    // Tell all the registered ObjectUsers that the page is in destruction.
+    // And clear the vector. This means that user do not need to call RemoveObjectUser()
+    // when they get called from ObjectInDestruction().
+    sdr::ObjectUserVector aList;
+    aList.swap(mpImpl->maObjectUsers);
+    for(sdr::ObjectUser* pObjectUser : aList)
+    {
+        DBG_ASSERT(pObjectUser, "SdrObject::~SdrObject: corrupt ObjectUser list (!)");
+        pObjectUser->ObjectInDestruction(*this);
+    }
+
+    // UserCall
+    SendUserCall(SdrUserCallType::Delete, GetLastBoundRect());
+    o3tl::reset_preserve_ptr_during(pPlusData);
+
+    pGrabBagItem.reset();
+    mpProperties.reset();
+    mpViewContact.reset();
+
+#ifdef DBG_UTIL
+    // SdrObjectLifetimeWatchDog:
+    impRemoveIncarnatedSdrObjectToSdrModel(*this, getSdrModelFromSdrObject());
+#endif
+}
+
+void SdrObject::Free( SdrObject*& _rpObject )
+{
+    SdrObject* pObject = _rpObject; _rpObject = nullptr;
+
+    if(nullptr == pObject)
+    {
+        // nothing to do
+        return;
+    }
+
+    SvxShape* pShape(pObject->getSvxShape());
+
+    if(pShape)
+    {
+        if(pShape->HasSdrObjectOwnership())
+        {
+            // only the SvxShape is allowed to delete me, and will reset
+            // the ownership before doing so
+            return;
+        }
+        else
+        {
+            // not only delete pObject, but also need to dispose uno shape
+            try
+            {
+                pShape->InvalidateSdrObject();
+                uno::Reference< lang::XComponent > xShapeComp( pObject->getWeakUnoShape(), uno::UNO_QUERY_THROW );
+                xShapeComp->dispose();
+            }
+            catch( const uno::Exception& )
+            {
+                DBG_UNHANDLED_EXCEPTION("svx");
+            }
+        }
+    }
+
+    delete pObject;
+}
+
+void SdrObject::SetRectsDirty(bool bNotMyself, bool bRecursive)
+{
+    if (!bNotMyself)
+    {
+        SetBoundRectDirty();
+        bSnapRectDirty=true;
+    }
+
+    if (bRecursive && nullptr != getParentSdrObjListFromSdrObject())
+    {
+        getParentSdrObjListFromSdrObject()->SetSdrObjListRectsDirty();
+    }
+}
+
+void SdrObject::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage)
+{
+    // The creation of the UNO shape in SdrObject::getUnoShape is influenced
+    // by pPage, so when the page changes we need to discard the cached UNO
+    // shape so that a new one will be created.
+    // If the page is changing to another page with the same model, we
+    // assume they create compatible UNO shape objects so we shouldn't have
+    // to invalidate.
+    // TTTT: This causes quite some problems in SvxDrawPage::add when used
+    // e.g. from Writer - the SdrObject may be cloned to target model, and
+    // the xShape was added to it by purpose (see there). Thus it will be
+    // good to think about if this is really needed - it *seems* to be intended
+    // for a xShape being a on-demand-creatable resource - with the argument that
+    // the SdrPage/UnoPage used influences the SvxShape creation. This uses
+    // resources and would be nice to get rid of anyways.
+    if(nullptr == pOldPage || nullptr == pNewPage)
+    {
+        SvxShape* const pShape(getSvxShape());
+
+        if (pShape && !pShape->HasSdrObjectOwnership())
+        {
+            setUnoShape(nullptr);
+        }
+    }
+}
+
+// init global static itempool
+SdrItemPool* SdrObject::mpGlobalItemPool = nullptr;
+
+SdrItemPool& SdrObject::GetGlobalDrawObjectItemPool()
+{
+    if(!mpGlobalItemPool)
+    {
+        mpGlobalItemPool = new SdrItemPool();
+        SfxItemPool* pGlobalOutlPool = EditEngine::CreatePool();
+        mpGlobalItemPool->SetSecondaryPool(pGlobalOutlPool);
+        mpGlobalItemPool->SetDefaultMetric(SdrEngineDefaults::GetMapUnit());
+        mpGlobalItemPool->FreezeIdRanges();
+    }
+
+    return *mpGlobalItemPool;
+}
+
+void SdrObject::SetRelativeWidth( double nValue )
+{
+    mpImpl->mnRelativeWidth = nValue;
+}
+
+void SdrObject::SetRelativeWidthRelation( sal_Int16 eValue )
+{
+    mpImpl->meRelativeWidthRelation = eValue;
+}
+
+void SdrObject::SetRelativeHeight( double nValue )
+{
+    mpImpl->mnRelativeHeight = nValue;
+}
+
+void SdrObject::SetRelativeHeightRelation( sal_Int16 eValue )
+{
+    mpImpl->meRelativeHeightRelation = eValue;
+}
+
+const double* SdrObject::GetRelativeWidth( ) const
+{
+    if (!mpImpl->mnRelativeWidth)
+        return nullptr;
+
+    return &*mpImpl->mnRelativeWidth;
+}
+
+sal_Int16 SdrObject::GetRelativeWidthRelation() const
+{
+    return mpImpl->meRelativeWidthRelation;
+}
+
+const double* SdrObject::GetRelativeHeight( ) const
+{
+    if (!mpImpl->mnRelativeHeight)
+        return nullptr;
+
+    return &*mpImpl->mnRelativeHeight;
+}
+
+sal_Int16 SdrObject::GetRelativeHeightRelation() const
+{
+    return mpImpl->meRelativeHeightRelation;
+}
+
+void SdrObject::SetDiagramData(std::shared_ptr<DiagramDataInterface> pDiagramData)
+{
+    mpImpl->mpDiagramData = pDiagramData;
+}
+
+std::shared_ptr<DiagramDataInterface> SdrObject::GetDiagramData() const
+{
+    return mpImpl->mpDiagramData;
+}
+
+SfxItemPool& SdrObject::GetObjectItemPool() const
+{
+    return getSdrModelFromSdrObject().GetItemPool();
+}
+
+SdrInventor SdrObject::GetObjInventor()   const
+{
+    return SdrInventor::Default;
+}
+
+sal_uInt16 SdrObject::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_NONE);
+}
+
+void SdrObject::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bRotateFreeAllowed=false;
+    rInfo.bMirrorFreeAllowed=false;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed     =false;
+    rInfo.bEdgeRadiusAllowed=false;
+    rInfo.bCanConvToPath    =false;
+    rInfo.bCanConvToPoly    =false;
+    rInfo.bCanConvToContour = false;
+    rInfo.bCanConvToPathLineToArea=false;
+    rInfo.bCanConvToPolyLineToArea=false;
+}
+
+SdrLayerID SdrObject::GetLayer() const
+{
+    return mnLayerID;
+}
+
+void SdrObject::getMergedHierarchySdrLayerIDSet(SdrLayerIDSet& rSet) const
+{
+    rSet.Set(GetLayer());
+    SdrObjList* pOL=GetSubList();
+    if (pOL!=nullptr) {
+        const size_t nObjCount = pOL->GetObjCount();
+        for (size_t nObjNum = 0; nObjNum<nObjCount; ++nObjNum) {
+            pOL->GetObj(nObjNum)->getMergedHierarchySdrLayerIDSet(rSet);
+        }
+    }
+}
+
+void SdrObject::NbcSetLayer(SdrLayerID nLayer)
+{
+    mnLayerID = nLayer;
+}
+
+void SdrObject::SetLayer(SdrLayerID nLayer)
+{
+    NbcSetLayer(nLayer);
+    SetChanged();
+    BroadcastObjectChange();
+}
+
+void SdrObject::AddListener(SfxListener& rListener)
+{
+    ImpForcePlusData();
+    if (pPlusData->pBroadcast==nullptr) pPlusData->pBroadcast.reset(new SfxBroadcaster);
+
+    // SdrEdgeObj may be connected to same SdrObject on both ends so allow it
+    // to listen twice
+    SdrEdgeObj const*const pEdge(dynamic_cast<SdrEdgeObj const*>(&rListener));
+    rListener.StartListening(*pPlusData->pBroadcast, pEdge ? DuplicateHandling::Allow : DuplicateHandling::Unexpected);
+}
+
+void SdrObject::RemoveListener(SfxListener& rListener)
+{
+    if (pPlusData!=nullptr && pPlusData->pBroadcast!=nullptr) {
+        rListener.EndListening(*pPlusData->pBroadcast);
+        if (!pPlusData->pBroadcast->HasListeners()) {
+            pPlusData->pBroadcast.reset();
+        }
+    }
+}
+
+const SfxBroadcaster* SdrObject::GetBroadcaster() const
+{
+    return pPlusData!=nullptr ? pPlusData->pBroadcast.get() : nullptr;
+}
+
+void SdrObject::AddReference(SdrVirtObj& rVrtObj)
+{
+    AddListener(rVrtObj);
+}
+
+void SdrObject::DelReference(SdrVirtObj& rVrtObj)
+{
+    RemoveListener(rVrtObj);
+}
+
+bool SdrObject::IsGroupObject() const
+{
+    return GetSubList()!=nullptr;
+}
+
+SdrObjList* SdrObject::GetSubList() const
+{
+    return nullptr;
+}
+
+SdrObject* SdrObject::getParentSdrObjectFromSdrObject() const
+{
+    SdrObjList* pParent(getParentSdrObjListFromSdrObject());
+
+    if(nullptr == pParent)
+    {
+        return nullptr;
+    }
+
+    return pParent->getSdrObjectFromSdrObjList();
+}
+
+void SdrObject::SetName(const OUString& rStr)
+{
+    if (!rStr.isEmpty() && !pPlusData)
+    {
+        ImpForcePlusData();
+    }
+
+    if(pPlusData && pPlusData->aObjName != rStr)
+    {
+        // Undo/Redo for setting object's name (#i73249#)
+        bool bUndo( false );
+        if ( getSdrModelFromSdrObject().IsUndoEnabled() )
+        {
+            bUndo = true;
+            std::unique_ptr<SdrUndoAction> pUndoAction =
+                    SdrUndoFactory::CreateUndoObjectStrAttr(
+                                                    *this,
+                                                    SdrUndoObjStrAttr::ObjStrAttrType::Name,
+                                                    GetName(),
+                                                    rStr );
+            getSdrModelFromSdrObject().BegUndo( pUndoAction->GetComment() );
+            getSdrModelFromSdrObject().AddUndo( std::move(pUndoAction) );
+        }
+        pPlusData->aObjName = rStr;
+        // Undo/Redo for setting object's name (#i73249#)
+        if ( bUndo )
+        {
+            getSdrModelFromSdrObject().EndUndo();
+        }
+        SetChanged();
+        BroadcastObjectChange();
+    }
+}
+
+OUString SdrObject::GetName() const
+{
+    if(pPlusData)
+    {
+        return pPlusData->aObjName;
+    }
+
+    return OUString();
+}
+
+void SdrObject::SetTitle(const OUString& rStr)
+{
+    if (!rStr.isEmpty() && !pPlusData)
+    {
+        ImpForcePlusData();
+    }
+
+    if(pPlusData && pPlusData->aObjTitle != rStr)
+    {
+        // Undo/Redo for setting object's title (#i73249#)
+        bool bUndo( false );
+        if ( getSdrModelFromSdrObject().IsUndoEnabled() )
+        {
+            bUndo = true;
+            std::unique_ptr<SdrUndoAction> pUndoAction =
+                    SdrUndoFactory::CreateUndoObjectStrAttr(
+                                                    *this,
+                                                    SdrUndoObjStrAttr::ObjStrAttrType::Title,
+                                                    GetTitle(),
+                                                    rStr );
+            getSdrModelFromSdrObject().BegUndo( pUndoAction->GetComment() );
+            getSdrModelFromSdrObject().AddUndo( std::move(pUndoAction) );
+        }
+        pPlusData->aObjTitle = rStr;
+        // Undo/Redo for setting object's title (#i73249#)
+        if ( bUndo )
+        {
+            getSdrModelFromSdrObject().EndUndo();
+        }
+        SetChanged();
+        BroadcastObjectChange();
+    }
+}
+
+OUString SdrObject::GetTitle() const
+{
+    if(pPlusData)
+    {
+        return pPlusData->aObjTitle;
+    }
+
+    return OUString();
+}
+
+void SdrObject::SetDescription(const OUString& rStr)
+{
+    if (!rStr.isEmpty() && !pPlusData)
+    {
+        ImpForcePlusData();
+    }
+
+    if(pPlusData && pPlusData->aObjDescription != rStr)
+    {
+        // Undo/Redo for setting object's description (#i73249#)
+        bool bUndo( false );
+        if ( getSdrModelFromSdrObject().IsUndoEnabled() )
+        {
+            bUndo = true;
+            std::unique_ptr<SdrUndoAction> pUndoAction =
+                    SdrUndoFactory::CreateUndoObjectStrAttr(
+                                                    *this,
+                                                    SdrUndoObjStrAttr::ObjStrAttrType::Description,
+                                                    GetDescription(),
+                                                    rStr );
+            getSdrModelFromSdrObject().BegUndo( pUndoAction->GetComment() );
+            getSdrModelFromSdrObject().AddUndo( std::move(pUndoAction) );
+        }
+        pPlusData->aObjDescription = rStr;
+        // Undo/Redo for setting object's description (#i73249#)
+        if ( bUndo )
+        {
+            getSdrModelFromSdrObject().EndUndo();
+        }
+        SetChanged();
+        BroadcastObjectChange();
+    }
+}
+
+OUString SdrObject::GetDescription() const
+{
+    if(pPlusData)
+    {
+        return pPlusData->aObjDescription;
+    }
+
+    return OUString();
+}
+
+sal_uInt32 SdrObject::GetOrdNum() const
+{
+    if (nullptr != getParentSdrObjListFromSdrObject())
+    {
+        if (getParentSdrObjListFromSdrObject()->IsObjOrdNumsDirty())
+        {
+            getParentSdrObjListFromSdrObject()->RecalcObjOrdNums();
+        }
+    } else const_cast<SdrObject*>(this)->nOrdNum=0;
+    return nOrdNum;
+}
+
+
+void SdrObject::SetOrdNum(sal_uInt32 nNum)
+{
+    nOrdNum = nNum;
+}
+
+void SdrObject::GetGrabBagItem(css::uno::Any& rVal) const
+{
+    if (pGrabBagItem != nullptr)
+        pGrabBagItem->QueryValue(rVal);
+    else
+        rVal <<= uno::Sequence<beans::PropertyValue>();
+}
+
+void SdrObject::SetGrabBagItem(const css::uno::Any& rVal)
+{
+    if (pGrabBagItem == nullptr)
+        pGrabBagItem.reset(new SfxGrabBagItem);
+
+    pGrabBagItem->PutValue(rVal, 0);
+
+    SetChanged();
+    BroadcastObjectChange();
+}
+
+sal_uInt32 SdrObject::GetNavigationPosition() const
+{
+    if (nullptr != getParentSdrObjListFromSdrObject() && getParentSdrObjListFromSdrObject()->RecalcNavigationPositions())
+    {
+        return mnNavigationPosition;
+    }
+    else
+        return GetOrdNum();
+}
+
+
+void SdrObject::SetNavigationPosition (const sal_uInt32 nNewPosition)
+{
+    mnNavigationPosition = nNewPosition;
+}
+
+
+// To make clearer that this method may trigger RecalcBoundRect and thus may be
+// expensive and sometimes problematic (inside a bigger object change you will get
+// non-useful BoundRects sometimes) I rename that method from GetBoundRect() to
+// GetCurrentBoundRect().
+const tools::Rectangle& SdrObject::GetCurrentBoundRect() const
+{
+    if(aOutRect.IsEmpty())
+    {
+        const_cast< SdrObject* >(this)->RecalcBoundRect();
+    }
+
+    return aOutRect;
+}
+
+// To have a possibility to get the last calculated BoundRect e.g for producing
+// the first rectangle for repaints (old and new need to be used) without forcing
+// a RecalcBoundRect (which may be problematical and expensive sometimes) I add here
+// a new method for accessing the last BoundRect.
+const tools::Rectangle& SdrObject::GetLastBoundRect() const
+{
+    return aOutRect;
+}
+
+void SdrObject::RecalcBoundRect()
+{
+    // #i101680# suppress BoundRect calculations on import(s)
+    if ((getSdrModelFromSdrObject().isLocked()) || utl::ConfigManager::IsFuzzing())
+        return;
+
+    // central new method which will calculate the BoundRect using primitive geometry
+    if(aOutRect.IsEmpty())
+    {
+        // Use view-independent data - we do not want any connections
+        // to e.g. GridOffset in SdrObject-level
+        const drawinglayer::primitive2d::Primitive2DContainer& xPrimitives(GetViewContact().getViewIndependentPrimitive2DContainer());
+
+        if(!xPrimitives.empty())
+        {
+            // use neutral ViewInformation and get the range of the primitives
+            const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+            const basegfx::B2DRange aRange(xPrimitives.getB2DRange(aViewInformation2D));
+
+            if(!aRange.isEmpty())
+            {
+                aOutRect = tools::Rectangle(
+                    static_cast<long>(floor(aRange.getMinX())),
+                    static_cast<long>(floor(aRange.getMinY())),
+                    static_cast<long>(ceil(aRange.getMaxX())),
+                    static_cast<long>(ceil(aRange.getMaxY())));
+                return;
+            }
+        }
+    }
+}
+
+void SdrObject::BroadcastObjectChange() const
+{
+    if ((getSdrModelFromSdrObject().isLocked()) || utl::ConfigManager::IsFuzzing())
+        return;
+
+    bool bPlusDataBroadcast(pPlusData && pPlusData->pBroadcast);
+    bool bObjectChange(IsInserted());
+
+    if(bPlusDataBroadcast || bObjectChange)
+    {
+        SdrHint aHint(SdrHintKind::ObjectChange, *this);
+
+        if(bPlusDataBroadcast)
+        {
+            pPlusData->pBroadcast->Broadcast(aHint);
+        }
+
+        if(bObjectChange)
+        {
+            getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+    }
+}
+
+void SdrObject::SetChanged()
+{
+    // For testing purposes, use the new ViewContact for change
+    // notification now.
+    ActionChanged();
+
+    // TTTT Need to check meaning/usage of IsInserted in one
+    // of the next changes. It should not mean to have a SdrModel
+    // set (this is guaranteed now), but should be connected to
+    // being added to a SdrPage (?)
+    // TTTT tdf#120066 Indeed - This triggers e.g. by CustomShape
+    // geometry-presenting SdrObjects that are in a SdrObjGroup,
+    // but the SdrObjGroup is *by purpose* not inserted.
+    // Need to check deeper and maybe identify all ::IsInserted()
+    // calls by rename and let the compiler work...
+    if(nullptr != getSdrPageFromSdrObject())
+    {
+        getSdrModelFromSdrObject().SetChanged();
+    }
+}
+
+// tooling for painting a single object to an OutputDevice.
+void SdrObject::SingleObjectPainter(OutputDevice& rOut) const
+{
+    sdr::contact::SdrObjectVector aObjectVector;
+    aObjectVector.push_back(const_cast< SdrObject* >(this));
+
+    sdr::contact::ObjectContactOfObjListPainter aPainter(rOut, aObjectVector, getSdrPageFromSdrObject());
+    sdr::contact::DisplayInfo aDisplayInfo;
+
+    aPainter.ProcessDisplay(aDisplayInfo);
+}
+
+bool SdrObject::LineGeometryUsageIsNecessary() const
+{
+    drawing::LineStyle eXLS = GetMergedItem(XATTR_LINESTYLE).GetValue();
+    return (eXLS != drawing::LineStyle_NONE);
+}
+
+bool SdrObject::HasLimitedRotation() const
+{
+    // RotGrfFlyFrame: Default is false, support full rotation
+    return false;
+}
+
+SdrObject* SdrObject::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrObject >(rTargetModel);
+}
+
+SdrObject& SdrObject::operator=(const SdrObject& rObj)
+{
+    if( this == &rObj )
+        return *this;
+
+    mpProperties.reset();
+    mpViewContact.reset();
+
+    // The CloneSdrObject() method uses the local copy constructor from the individual
+    // sdr::properties::BaseProperties class. Since the target class maybe for another
+    // draw object, an SdrObject needs to be provided, as in the normal constructor.
+    mpProperties = rObj.GetProperties().Clone(*this);
+
+    aOutRect=rObj.aOutRect;
+    mnLayerID = rObj.mnLayerID;
+    aAnchor =rObj.aAnchor;
+    bVirtObj=rObj.bVirtObj;
+    bSizProt=rObj.bSizProt;
+    bMovProt=rObj.bMovProt;
+    bNoPrint=rObj.bNoPrint;
+    mbVisible=rObj.mbVisible;
+    bMarkProt=rObj.bMarkProt;
+    bEmptyPresObj =rObj.bEmptyPresObj;
+    bNotVisibleAsMaster=rObj.bNotVisibleAsMaster;
+    bSnapRectDirty=true;
+    pPlusData.reset();
+    if (rObj.pPlusData!=nullptr) {
+        pPlusData.reset(rObj.pPlusData->Clone(this));
+    }
+    if (pPlusData!=nullptr && pPlusData->pBroadcast!=nullptr) {
+        pPlusData->pBroadcast.reset(); // broadcaster isn't copied
+    }
+
+    pGrabBagItem.reset();
+    if (rObj.pGrabBagItem!=nullptr)
+        pGrabBagItem.reset(rObj.pGrabBagItem->Clone());
+    return *this;
+}
+
+OUString SdrObject::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulNONE));
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+    return sName.makeStringAndClear();
+}
+
+OUString SdrObject::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralNONE);
+}
+
+OUString SdrObject::ImpGetDescriptionStr(const char* pStrCacheID) const
+{
+    OUString aStr = SvxResId(pStrCacheID);
+    sal_Int32 nPos = aStr.indexOf("%1");
+    if (nPos >= 0)
+    {
+        // Replace '%1' with the object name.
+        OUString aObjName(TakeObjNameSingul());
+        aStr = aStr.replaceAt(nPos, 2, aObjName);
+    }
+
+    nPos = aStr.indexOf("%2");
+    if (nPos >= 0)
+        // Replace '%2' with the passed value.
+        aStr = aStr.replaceAt(nPos, 2, "0");
+    return aStr;
+}
+
+void SdrObject::ImpForcePlusData()
+{
+    if (!pPlusData)
+        pPlusData.reset( new SdrObjPlusData );
+}
+
+OUString SdrObject::GetMetrStr(long nVal) const
+{
+    return getSdrModelFromSdrObject().GetMetricString(nVal);
+}
+
+basegfx::B2DPolyPolygon SdrObject::TakeXorPoly() const
+{
+    basegfx::B2DPolyPolygon aRetval;
+    const tools::Rectangle aR(GetCurrentBoundRect());
+    aRetval.append(basegfx::utils::createPolygonFromRect(vcl::unotools::b2DRectangleFromRectangle(aR)));
+
+    return aRetval;
+}
+
+basegfx::B2DPolyPolygon SdrObject::TakeContour() const
+{
+    basegfx::B2DPolyPolygon aRetval;
+
+    // create cloned object without text, but with drawing::LineStyle_SOLID,
+    // COL_BLACK as line color and drawing::FillStyle_NONE
+    SdrObject* pClone(CloneSdrObject(getSdrModelFromSdrObject()));
+
+    if(pClone)
+    {
+        const SdrTextObj* pTextObj = dynamic_cast< const SdrTextObj* >(this);
+
+        if(pTextObj)
+        {
+            // no text and no text animation
+            pClone->SetMergedItem(SdrTextAniKindItem(SdrTextAniKind::NONE));
+            pClone->SetOutlinerParaObject(nullptr);
+        }
+
+        const SdrEdgeObj* pEdgeObj = dynamic_cast< const SdrEdgeObj* >(this);
+
+        if(pEdgeObj)
+        {
+            // create connections if connector, will be cleaned up when
+            // deleting the connector again
+            SdrObject* pLeft = pEdgeObj->GetConnectedNode(true);
+            SdrObject* pRight = pEdgeObj->GetConnectedNode(false);
+
+            if(pLeft)
+            {
+                pClone->ConnectToNode(true, pLeft);
+            }
+
+            if(pRight)
+            {
+                pClone->ConnectToNode(false, pRight);
+            }
+        }
+
+        SfxItemSet aNewSet(GetObjectItemPool());
+
+        // #i101980# ignore LineWidth; that's what the old implementation
+        // did. With line width, the result may be huge due to fat/thick
+        // line decompositions
+        aNewSet.Put(XLineWidthItem(0));
+
+        // solid black lines and no fill
+        aNewSet.Put(XLineStyleItem(drawing::LineStyle_SOLID));
+        aNewSet.Put(XLineColorItem(OUString(), COL_BLACK));
+        aNewSet.Put(XFillStyleItem(drawing::FillStyle_NONE));
+        pClone->SetMergedItemSet(aNewSet);
+
+        // get sequence from clone
+        const sdr::contact::ViewContact& rVC(pClone->GetViewContact());
+        const drawinglayer::primitive2d::Primitive2DContainer& xSequence(rVC.getViewIndependentPrimitive2DContainer());
+
+        if(!xSequence.empty())
+        {
+            // use neutral ViewInformation
+            const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+
+            // create extractor, process and get result (with hairlines as opened polygons)
+            drawinglayer::processor2d::ContourExtractor2D aExtractor(aViewInformation2D, false);
+            aExtractor.process(xSequence);
+            const basegfx::B2DPolyPolygonVector& rResult(aExtractor.getExtractedContour());
+            const sal_uInt32 nSize(rResult.size());
+
+            // when count is one, it is implied that the object has only its normal
+            // contour anyways and TakeContour() is to return an empty PolyPolygon
+            // (see old implementation for historical reasons)
+            if(nSize > 1)
+            {
+                // the topology for contour is correctly a vector of PolyPolygons; for
+                // historical reasons cut it back to a single tools::PolyPolygon here
+                for(sal_uInt32 a(0); a < nSize; a++)
+                {
+                    aRetval.append(rResult[a]);
+                }
+            }
+        }
+
+        // Always use SdrObject::Free to delete SdrObjects (!)
+        SdrObject::Free(pClone);
+    }
+
+    return aRetval;
+}
+
+sal_uInt32 SdrObject::GetHdlCount() const
+{
+    return 8;
+}
+
+void SdrObject::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    const tools::Rectangle& rR=GetSnapRect();
+    for (sal_uInt32 nHdlNum=0; nHdlNum<8; ++nHdlNum)
+    {
+        std::unique_ptr<SdrHdl> pH;
+        switch (nHdlNum) {
+            case 0: pH.reset(new SdrHdl(rR.TopLeft(),     SdrHdlKind::UpperLeft)); break;
+            case 1: pH.reset(new SdrHdl(rR.TopCenter(),   SdrHdlKind::Upper)); break;
+            case 2: pH.reset(new SdrHdl(rR.TopRight(),    SdrHdlKind::UpperRight)); break;
+            case 3: pH.reset(new SdrHdl(rR.LeftCenter(),  SdrHdlKind::Left )); break;
+            case 4: pH.reset(new SdrHdl(rR.RightCenter(), SdrHdlKind::Right)); break;
+            case 5: pH.reset(new SdrHdl(rR.BottomLeft(),  SdrHdlKind::LowerLeft)); break;
+            case 6: pH.reset(new SdrHdl(rR.BottomCenter(),SdrHdlKind::Lower)); break;
+            case 7: pH.reset(new SdrHdl(rR.BottomRight(), SdrHdlKind::LowerRight)); break;
+        }
+        rHdlList.AddHdl(std::move(pH));
+    }
+}
+
+void SdrObject::AddToPlusHdlList(SdrHdlList&, SdrHdl&) const
+{
+}
+
+void SdrObject::addCropHandles(SdrHdlList& /*rTarget*/) const
+{
+    // Default implementation, does nothing. Overloaded in
+    // SdrGrafObj and SwVirtFlyDrawObj
+}
+
+tools::Rectangle SdrObject::ImpDragCalcRect(const SdrDragStat& rDrag) const
+{
+    tools::Rectangle aTmpRect(GetSnapRect());
+    tools::Rectangle aRect(aTmpRect);
+    const SdrHdl* pHdl=rDrag.GetHdl();
+    SdrHdlKind eHdl=pHdl==nullptr ? SdrHdlKind::Move : pHdl->GetKind();
+    bool bEcke=(eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::LowerLeft || eHdl==SdrHdlKind::LowerRight);
+    bool bOrtho=rDrag.GetView()!=nullptr && rDrag.GetView()->IsOrtho();
+    bool bBigOrtho=bEcke && bOrtho && rDrag.GetView()->IsBigOrtho();
+    Point aPos(rDrag.GetNow());
+    bool bLft=(eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::Left  || eHdl==SdrHdlKind::LowerLeft);
+    bool bRgt=(eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::Right || eHdl==SdrHdlKind::LowerRight);
+    bool bTop=(eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::Upper || eHdl==SdrHdlKind::UpperLeft);
+    bool bBtm=(eHdl==SdrHdlKind::LowerRight || eHdl==SdrHdlKind::Lower || eHdl==SdrHdlKind::LowerLeft);
+    if (bLft) aTmpRect.SetLeft(aPos.X() );
+    if (bRgt) aTmpRect.SetRight(aPos.X() );
+    if (bTop) aTmpRect.SetTop(aPos.Y() );
+    if (bBtm) aTmpRect.SetBottom(aPos.Y() );
+    if (bOrtho) { // Ortho
+        long nWdt0=aRect.Right() -aRect.Left();
+        long nHgt0=aRect.Bottom()-aRect.Top();
+        long nXMul=aTmpRect.Right() -aTmpRect.Left();
+        long nYMul=aTmpRect.Bottom()-aTmpRect.Top();
+        long nXDiv=nWdt0;
+        long nYDiv=nHgt0;
+        bool bXNeg=(nXMul<0)!=(nXDiv<0);
+        bool bYNeg=(nYMul<0)!=(nYDiv<0);
+        nXMul=std::abs(nXMul);
+        nYMul=std::abs(nYMul);
+        nXDiv=std::abs(nXDiv);
+        nYDiv=std::abs(nYDiv);
+        Fraction aXFact(nXMul,nXDiv); // fractions for canceling
+        Fraction aYFact(nYMul,nYDiv); // and for comparing
+        nXMul=aXFact.GetNumerator();
+        nYMul=aYFact.GetNumerator();
+        nXDiv=aXFact.GetDenominator();
+        nYDiv=aYFact.GetDenominator();
+        if (bEcke) { // corner point handles
+            bool bUseX=(aXFact<aYFact) != bBigOrtho;
+            if (bUseX) {
+                long nNeed=long(BigInt(nHgt0)*BigInt(nXMul)/BigInt(nXDiv));
+                if (bYNeg) nNeed=-nNeed;
+                if (bTop) aTmpRect.SetTop(aTmpRect.Bottom()-nNeed );
+                if (bBtm) aTmpRect.SetBottom(aTmpRect.Top()+nNeed );
+            } else {
+                long nNeed=long(BigInt(nWdt0)*BigInt(nYMul)/BigInt(nYDiv));
+                if (bXNeg) nNeed=-nNeed;
+                if (bLft) aTmpRect.SetLeft(aTmpRect.Right()-nNeed );
+                if (bRgt) aTmpRect.SetRight(aTmpRect.Left()+nNeed );
+            }
+        } else { // apex handles
+            if ((bLft || bRgt) && nXDiv!=0) {
+                long nHgt0b=aRect.Bottom()-aRect.Top();
+                long nNeed=long(BigInt(nHgt0b)*BigInt(nXMul)/BigInt(nXDiv));
+                aTmpRect.AdjustTop( -((nNeed-nHgt0b)/2) );
+                aTmpRect.SetBottom(aTmpRect.Top()+nNeed );
+            }
+            if ((bTop || bBtm) && nYDiv!=0) {
+                long nWdt0b=aRect.Right()-aRect.Left();
+                long nNeed=long(BigInt(nWdt0b)*BigInt(nYMul)/BigInt(nYDiv));
+                aTmpRect.AdjustLeft( -((nNeed-nWdt0b)/2) );
+                aTmpRect.SetRight(aTmpRect.Left()+nNeed );
+            }
+        }
+    }
+    aTmpRect.Justify();
+    return aTmpRect;
+}
+
+
+bool SdrObject::hasSpecialDrag() const
+{
+    return false;
+}
+
+bool SdrObject::supportsFullDrag() const
+{
+    return true;
+}
+
+SdrObjectUniquePtr SdrObject::getFullDragClone() const
+{
+    // default uses simple clone
+    return SdrObjectUniquePtr(CloneSdrObject(getSdrModelFromSdrObject()));
+}
+
+bool SdrObject::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    const SdrHdl* pHdl = rDrag.GetHdl();
+
+    SdrHdlKind eHdl = (pHdl == nullptr) ? SdrHdlKind::Move : pHdl->GetKind();
+
+    return eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::Upper || eHdl==SdrHdlKind::UpperRight ||
+        eHdl==SdrHdlKind::Left || eHdl==SdrHdlKind::Right || eHdl==SdrHdlKind::LowerLeft ||
+        eHdl==SdrHdlKind::Lower || eHdl==SdrHdlKind::LowerRight;
+}
+
+bool SdrObject::applySpecialDrag(SdrDragStat& rDrag)
+{
+    tools::Rectangle aNewRect(ImpDragCalcRect(rDrag));
+
+    if(aNewRect != GetSnapRect())
+    {
+           NbcSetSnapRect(aNewRect);
+    }
+
+    return true;
+}
+
+OUString SdrObject::getSpecialDragComment(const SdrDragStat& /*rDrag*/) const
+{
+    return OUString();
+}
+
+basegfx::B2DPolyPolygon SdrObject::getSpecialDragPoly(const SdrDragStat& /*rDrag*/) const
+{
+    // default has nothing to add
+    return basegfx::B2DPolyPolygon();
+}
+
+
+// Create
+bool SdrObject::BegCreate(SdrDragStat& rStat)
+{
+    rStat.SetOrtho4Possible();
+    tools::Rectangle aRect1(rStat.GetStart(), rStat.GetNow());
+    aRect1.Justify();
+    rStat.SetActionRect(aRect1);
+    aOutRect = aRect1;
+    return true;
+}
+
+bool SdrObject::MovCreate(SdrDragStat& rStat)
+{
+    rStat.TakeCreateRect(aOutRect);
+    rStat.SetActionRect(aOutRect);
+    aOutRect.Justify();
+
+    return true;
+}
+
+bool SdrObject::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    rStat.TakeCreateRect(aOutRect);
+    aOutRect.Justify();
+
+    return (eCmd==SdrCreateCmd::ForceEnd || rStat.GetPointCount()>=2);
+}
+
+void SdrObject::BrkCreate(SdrDragStat& /*rStat*/)
+{
+}
+
+bool SdrObject::BckCreate(SdrDragStat& /*rStat*/)
+{
+    return false;
+}
+
+basegfx::B2DPolyPolygon SdrObject::TakeCreatePoly(const SdrDragStat& rDrag) const
+{
+    tools::Rectangle aRect1;
+    rDrag.TakeCreateRect(aRect1);
+    aRect1.Justify();
+
+    basegfx::B2DPolyPolygon aRetval;
+    aRetval.append(basegfx::utils::createPolygonFromRect(vcl::unotools::b2DRectangleFromRectangle(aRect1)));
+    return aRetval;
+}
+
+PointerStyle SdrObject::GetCreatePointer() const
+{
+    return PointerStyle::Cross;
+}
+
+// transformations
+void SdrObject::NbcMove(const Size& rSiz)
+{
+    aOutRect.Move(rSiz);
+    SetRectsDirty();
+}
+
+void SdrObject::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0);
+    bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0);
+    if (bXMirr || bYMirr) {
+        Point aRef1(GetSnapRect().Center());
+        if (bXMirr) {
+            Point aRef2(aRef1);
+            aRef2.AdjustY( 1 );
+            NbcMirrorGluePoints(aRef1,aRef2);
+        }
+        if (bYMirr) {
+            Point aRef2(aRef1);
+            aRef2.AdjustX( 1 );
+            NbcMirrorGluePoints(aRef1,aRef2);
+        }
+    }
+    ResizeRect(aOutRect,rRef,xFact,yFact);
+    SetRectsDirty();
+}
+
+void SdrObject::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    SetGlueReallyAbsolute(true);
+    aOutRect.Move(-rRef.X(),-rRef.Y());
+    tools::Rectangle R(aOutRect);
+    if (sn==1.0 && cs==0.0) { // 90deg
+        aOutRect.SetLeft(-R.Bottom() );
+        aOutRect.SetRight(-R.Top() );
+        aOutRect.SetTop(R.Left() );
+        aOutRect.SetBottom(R.Right() );
+    } else if (sn==0.0 && cs==-1.0) { // 180deg
+        aOutRect.SetLeft(-R.Right() );
+        aOutRect.SetRight(-R.Left() );
+        aOutRect.SetTop(-R.Bottom() );
+        aOutRect.SetBottom(-R.Top() );
+    } else if (sn==-1.0 && cs==0.0) { // 270deg
+        aOutRect.SetLeft(R.Top() );
+        aOutRect.SetRight(R.Bottom() );
+        aOutRect.SetTop(-R.Right() );
+        aOutRect.SetBottom(-R.Left() );
+    }
+    aOutRect.Move(rRef.X(),rRef.Y());
+    aOutRect.Justify(); // just in case
+    SetRectsDirty();
+    NbcRotateGluePoints(rRef,nAngle,sn,cs);
+    SetGlueReallyAbsolute(false);
+}
+
+void SdrObject::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    SetGlueReallyAbsolute(true);
+    aOutRect.Move(-rRef1.X(),-rRef1.Y());
+    tools::Rectangle R(aOutRect);
+    long dx=rRef2.X()-rRef1.X();
+    long dy=rRef2.Y()-rRef1.Y();
+    if (dx==0) {          // vertical axis
+        aOutRect.SetLeft(-R.Right() );
+        aOutRect.SetRight(-R.Left() );
+    } else if (dy==0) {   // horizontal axis
+        aOutRect.SetTop(-R.Bottom() );
+        aOutRect.SetBottom(-R.Top() );
+    } else if (dx==dy) {  // 45deg axis
+        aOutRect.SetLeft(R.Top() );
+        aOutRect.SetRight(R.Bottom() );
+        aOutRect.SetTop(R.Left() );
+        aOutRect.SetBottom(R.Right() );
+    } else if (dx==-dy) { // 45deg axis
+        aOutRect.SetLeft(-R.Bottom() );
+        aOutRect.SetRight(-R.Top() );
+        aOutRect.SetTop(-R.Right() );
+        aOutRect.SetBottom(-R.Left() );
+    }
+    aOutRect.Move(rRef1.X(),rRef1.Y());
+    aOutRect.Justify(); // just in case
+    SetRectsDirty();
+    NbcMirrorGluePoints(rRef1,rRef2);
+    SetGlueReallyAbsolute(false);
+}
+
+void SdrObject::NbcShear(const Point& rRef, long /*nAngle*/, double tn, bool bVShear)
+{
+    SetGlueReallyAbsolute(true);
+    NbcShearGluePoints(rRef,tn,bVShear);
+    SetGlueReallyAbsolute(false);
+}
+
+void SdrObject::Move(const Size& rSiz)
+{
+    if (rSiz.Width()!=0 || rSiz.Height()!=0) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcMove(rSiz);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+
+void SdrObject::NbcCrop(const basegfx::B2DPoint& /*aRef*/, double /*fxFact*/, double /*fyFact*/)
+{
+    // Default: does nothing. Real behaviour in SwVirtFlyDrawObj and SdrDragCrop::EndSdrDrag.
+    // Where SwVirtFlyDrawObj is the only real user of it to do something local
+}
+
+void SdrObject::Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bUnsetRelative)
+{
+    if (xFact.GetNumerator()!=xFact.GetDenominator() || yFact.GetNumerator()!=yFact.GetDenominator()) {
+        if (bUnsetRelative)
+        {
+            mpImpl->mnRelativeWidth.reset();
+            mpImpl->meRelativeWidthRelation = text::RelOrientation::PAGE_FRAME;
+            mpImpl->meRelativeHeightRelation = text::RelOrientation::PAGE_FRAME;
+            mpImpl->mnRelativeHeight.reset();
+        }
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcResize(rRef,xFact,yFact);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrObject::Crop(const basegfx::B2DPoint& rRef, double fxFact, double fyFact)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcCrop(rRef, fxFact, fyFact);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrObject::Rotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    if (nAngle!=0) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcRotate(rRef,nAngle,sn,cs);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrObject::Mirror(const Point& rRef1, const Point& rRef2)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcMirror(rRef1,rRef2);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrObject::Shear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    if (nAngle!=0) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcShear(rRef,nAngle,tn,bVShear);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrObject::NbcSetRelativePos(const Point& rPnt)
+{
+    Point aRelPos0(GetSnapRect().TopLeft()-aAnchor);
+    Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y());
+    NbcMove(aSiz); // This also calls SetRectsDirty()
+}
+
+void SdrObject::SetRelativePos(const Point& rPnt)
+{
+    if (rPnt!=GetRelativePos()) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcSetRelativePos(rPnt);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+
+Point SdrObject::GetRelativePos() const
+{
+    return GetSnapRect().TopLeft()-aAnchor;
+}
+
+void SdrObject::ImpSetAnchorPos(const Point& rPnt)
+{
+    aAnchor = rPnt;
+}
+
+void SdrObject::NbcSetAnchorPos(const Point& rPnt)
+{
+    Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y());
+    aAnchor=rPnt;
+    NbcMove(aSiz); // This also calls SetRectsDirty()
+}
+
+void SdrObject::SetAnchorPos(const Point& rPnt)
+{
+    if (rPnt!=aAnchor) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcSetAnchorPos(rPnt);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+
+const Point& SdrObject::GetAnchorPos() const
+{
+    return aAnchor;
+}
+
+void SdrObject::RecalcSnapRect()
+{
+}
+
+const tools::Rectangle& SdrObject::GetSnapRect() const
+{
+    return aOutRect;
+}
+
+void SdrObject::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    aOutRect=rRect;
+}
+
+const tools::Rectangle& SdrObject::GetLogicRect() const
+{
+    return GetSnapRect();
+}
+
+void SdrObject::NbcSetLogicRect(const tools::Rectangle& rRect)
+{
+    NbcSetSnapRect(rRect);
+}
+
+void SdrObject::AdjustToMaxRect( const tools::Rectangle& rMaxRect, bool /* bShrinkOnly = false */ )
+{
+    SetLogicRect( rMaxRect );
+}
+
+void SdrObject::SetSnapRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcSetSnapRect(rRect);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrObject::SetLogicRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcSetLogicRect(rRect);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+long SdrObject::GetRotateAngle() const
+{
+    return 0;
+}
+
+long SdrObject::GetShearAngle(bool /*bVertical*/) const
+{
+    return 0;
+}
+
+sal_uInt32 SdrObject::GetSnapPointCount() const
+{
+    return GetPointCount();
+}
+
+Point SdrObject::GetSnapPoint(sal_uInt32 i) const
+{
+    return GetPoint(i);
+}
+
+bool SdrObject::IsPolyObj() const
+{
+    return false;
+}
+
+sal_uInt32 SdrObject::GetPointCount() const
+{
+    return 0;
+}
+
+Point SdrObject::GetPoint(sal_uInt32 /*i*/) const
+{
+    return Point();
+}
+
+void SdrObject::SetPoint(const Point& rPnt, sal_uInt32 i)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcSetPoint(rPnt, i);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrObject::NbcSetPoint(const Point& /*rPnt*/, sal_uInt32 /*i*/)
+{
+}
+
+bool SdrObject::HasTextEdit() const
+{
+    return false;
+}
+
+bool SdrObject::Equals(const SdrObject& rOtherObj) const
+{
+    return (aAnchor.X() == rOtherObj.aAnchor.X() && aAnchor.Y() == rOtherObj.aAnchor.Y() &&
+            nOrdNum == rOtherObj.nOrdNum && mnNavigationPosition == rOtherObj.mnNavigationPosition &&
+            mbSupportTextIndentingOnLineWidthChange == rOtherObj.mbSupportTextIndentingOnLineWidthChange &&
+            mbLineIsOutsideGeometry == rOtherObj.mbLineIsOutsideGeometry && bMarkProt == rOtherObj.bMarkProt &&
+            bIs3DObj == rOtherObj.bIs3DObj && bIsEdge == rOtherObj.bIsEdge && bClosedObj == rOtherObj.bClosedObj &&
+            bNotVisibleAsMaster == rOtherObj.bNotVisibleAsMaster && bEmptyPresObj == rOtherObj.bEmptyPresObj &&
+            mbVisible == rOtherObj.mbVisible && bNoPrint == rOtherObj.bNoPrint && bSizProt == rOtherObj.bSizProt &&
+            bMovProt == rOtherObj.bMovProt && bVirtObj == rOtherObj.bVirtObj &&
+            mnLayerID == rOtherObj.mnLayerID && GetMergedItemSet().Equals(rOtherObj.GetMergedItemSet(), false) );
+}
+
+void SdrObject::dumpAsXml(xmlTextWriterPtr pWriter) const
+{
+    xmlTextWriterStartElement(pWriter, BAD_CAST("SdrObject"));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this);
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("symbol"), "%s", BAD_CAST(typeid(*this).name()));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("name"), "%s", BAD_CAST(GetName().toUtf8().getStr()));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("title"), "%s", BAD_CAST(GetTitle().toUtf8().getStr()));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("description"), "%s", BAD_CAST(GetDescription().toUtf8().getStr()));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("nOrdNum"), "%" SAL_PRIuUINT32, GetOrdNumDirect());
+    xmlTextWriterWriteAttribute(pWriter, BAD_CAST("aOutRect"), BAD_CAST(aOutRect.toString().getStr()));
+
+    if (mpProperties)
+    {
+        mpProperties->dumpAsXml(pWriter);
+    }
+
+    if (const OutlinerParaObject* pOutliner = GetOutlinerParaObject())
+        pOutliner->dumpAsXml(pWriter);
+
+    xmlTextWriterEndElement(pWriter);
+}
+
+void SdrObject::SetOutlinerParaObject(std::unique_ptr<OutlinerParaObject> pTextObject)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcSetOutlinerParaObject(std::move(pTextObject));
+    SetChanged();
+    BroadcastObjectChange();
+    if (GetCurrentBoundRect()!=aBoundRect0) {
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrObject::NbcSetOutlinerParaObject(std::unique_ptr<OutlinerParaObject> /*pTextObject*/)
+{
+}
+
+OutlinerParaObject* SdrObject::GetOutlinerParaObject() const
+{
+    return nullptr;
+}
+
+void SdrObject::NbcReformatText()
+{
+}
+
+void SdrObject::BurnInStyleSheetAttributes()
+{
+    GetProperties().ForceStyleToHardAttributes();
+}
+
+bool SdrObject::HasMacro() const
+{
+    return false;
+}
+
+SdrObject* SdrObject::CheckMacroHit(const SdrObjMacroHitRec& rRec) const
+{
+    if(rRec.pPageView)
+    {
+        return SdrObjectPrimitiveHit(*this, rRec.aPos, rRec.nTol, *rRec.pPageView, rRec.pVisiLayer, false);
+    }
+
+    return nullptr;
+}
+
+PointerStyle SdrObject::GetMacroPointer(const SdrObjMacroHitRec&) const
+{
+    return PointerStyle::RefHand;
+}
+
+void SdrObject::PaintMacro(OutputDevice& rOut, const tools::Rectangle& , const SdrObjMacroHitRec& ) const
+{
+    const RasterOp eRop(rOut.GetRasterOp());
+    const basegfx::B2DPolyPolygon aPolyPolygon(TakeXorPoly());
+
+    rOut.SetLineColor(COL_BLACK);
+    rOut.SetFillColor();
+    rOut.SetRasterOp(RasterOp::Invert);
+
+    for(auto const& rPolygon : aPolyPolygon)
+    {
+        rOut.DrawPolyLine(rPolygon);
+    }
+
+    rOut.SetRasterOp(eRop);
+}
+
+bool SdrObject::DoMacro(const SdrObjMacroHitRec&)
+{
+    return false;
+}
+
+bool SdrObject::IsMacroHit(const SdrObjMacroHitRec& rRec) const
+{
+    return CheckMacroHit(rRec) != nullptr;
+}
+
+
+SdrObjGeoData* SdrObject::NewGeoData() const
+{
+    return new SdrObjGeoData;
+}
+
+void SdrObject::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    rGeo.aBoundRect    =GetCurrentBoundRect();
+    rGeo.aAnchor       =aAnchor       ;
+    rGeo.bMovProt      =bMovProt      ;
+    rGeo.bSizProt      =bSizProt      ;
+    rGeo.bNoPrint      =bNoPrint      ;
+    rGeo.mbVisible     =mbVisible     ;
+    rGeo.bClosedObj    =bClosedObj    ;
+    rGeo.mnLayerID = mnLayerID;
+
+    // user-defined glue points
+    if (pPlusData!=nullptr && pPlusData->pGluePoints!=nullptr) {
+        if (rGeo.pGPL!=nullptr) {
+            *rGeo.pGPL=*pPlusData->pGluePoints;
+        } else {
+            rGeo.pGPL.reset( new SdrGluePointList(*pPlusData->pGluePoints) );
+        }
+    } else {
+        rGeo.pGPL.reset();
+    }
+}
+
+void SdrObject::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SetRectsDirty();
+    aOutRect      =rGeo.aBoundRect    ;
+    aAnchor       =rGeo.aAnchor       ;
+    bMovProt      =rGeo.bMovProt      ;
+    bSizProt      =rGeo.bSizProt      ;
+    bNoPrint      =rGeo.bNoPrint      ;
+    mbVisible     =rGeo.mbVisible     ;
+    bClosedObj    =rGeo.bClosedObj    ;
+    mnLayerID = rGeo.mnLayerID;
+
+    // user-defined glue points
+    if (rGeo.pGPL!=nullptr) {
+        ImpForcePlusData();
+        if (pPlusData->pGluePoints!=nullptr) {
+            *pPlusData->pGluePoints=*rGeo.pGPL;
+        } else {
+            pPlusData->pGluePoints.reset(new SdrGluePointList(*rGeo.pGPL));
+        }
+    } else {
+        if (pPlusData!=nullptr && pPlusData->pGluePoints!=nullptr) {
+            pPlusData->pGluePoints.reset();
+        }
+    }
+}
+
+SdrObjGeoData* SdrObject::GetGeoData() const
+{
+    SdrObjGeoData* pGeo=NewGeoData();
+    SaveGeoData(*pGeo);
+    return pGeo;
+}
+
+void SdrObject::SetGeoData(const SdrObjGeoData& rGeo)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    RestGeoData(rGeo);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+
+// ItemSet access
+
+const SfxItemSet& SdrObject::GetObjectItemSet() const
+{
+    return GetProperties().GetObjectItemSet();
+}
+
+const SfxItemSet& SdrObject::GetMergedItemSet() const
+{
+    return GetProperties().GetMergedItemSet();
+}
+
+void SdrObject::SetObjectItem(const SfxPoolItem& rItem)
+{
+    GetProperties().SetObjectItem(rItem);
+}
+
+void SdrObject::SetMergedItem(const SfxPoolItem& rItem)
+{
+    GetProperties().SetMergedItem(rItem);
+}
+
+void SdrObject::ClearMergedItem(const sal_uInt16 nWhich)
+{
+    GetProperties().ClearMergedItem(nWhich);
+}
+
+void SdrObject::SetObjectItemSet(const SfxItemSet& rSet)
+{
+    GetProperties().SetObjectItemSet(rSet);
+}
+
+void SdrObject::SetMergedItemSet(const SfxItemSet& rSet, bool bClearAllItems)
+{
+    GetProperties().SetMergedItemSet(rSet, bClearAllItems);
+}
+
+const SfxPoolItem& SdrObject::GetObjectItem(const sal_uInt16 nWhich) const
+{
+    return GetObjectItemSet().Get(nWhich);
+}
+
+const SfxPoolItem& SdrObject::GetMergedItem(const sal_uInt16 nWhich) const
+{
+    return GetMergedItemSet().Get(nWhich);
+}
+
+void SdrObject::SetMergedItemSetAndBroadcast(const SfxItemSet& rSet, bool bClearAllItems)
+{
+    GetProperties().SetMergedItemSetAndBroadcast(rSet, bClearAllItems);
+}
+
+void SdrObject::ApplyNotPersistAttr(const SfxItemSet& rAttr)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcApplyNotPersistAttr(rAttr);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrObject::NbcApplyNotPersistAttr(const SfxItemSet& rAttr)
+{
+    const tools::Rectangle& rSnap=GetSnapRect();
+    const tools::Rectangle& rLogic=GetLogicRect();
+    Point aRef1(rSnap.Center());
+    const SfxPoolItem *pPoolItem=nullptr;
+    if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1X,true,&pPoolItem)==SfxItemState::SET) {
+        aRef1.setX(static_cast<const SdrTransformRef1XItem*>(pPoolItem)->GetValue() );
+    }
+    if (rAttr.GetItemState(SDRATTR_TRANSFORMREF1Y,true,&pPoolItem)==SfxItemState::SET) {
+        aRef1.setY(static_cast<const SdrTransformRef1YItem*>(pPoolItem)->GetValue() );
+    }
+
+    tools::Rectangle aNewSnap(rSnap);
+    if (rAttr.GetItemState(SDRATTR_MOVEX,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrMoveXItem*>(pPoolItem)->GetValue();
+        aNewSnap.Move(n,0);
+    }
+    if (rAttr.GetItemState(SDRATTR_MOVEY,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrMoveYItem*>(pPoolItem)->GetValue();
+        aNewSnap.Move(0,n);
+    }
+    if (rAttr.GetItemState(SDRATTR_ONEPOSITIONX,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrOnePositionXItem*>(pPoolItem)->GetValue();
+        aNewSnap.Move(n-aNewSnap.Left(),0);
+    }
+    if (rAttr.GetItemState(SDRATTR_ONEPOSITIONY,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrOnePositionYItem*>(pPoolItem)->GetValue();
+        aNewSnap.Move(0,n-aNewSnap.Top());
+    }
+    if (rAttr.GetItemState(SDRATTR_ONESIZEWIDTH,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrOneSizeWidthItem*>(pPoolItem)->GetValue();
+        aNewSnap.SetRight(aNewSnap.Left()+n );
+    }
+    if (rAttr.GetItemState(SDRATTR_ONESIZEHEIGHT,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrOneSizeHeightItem*>(pPoolItem)->GetValue();
+        aNewSnap.SetBottom(aNewSnap.Top()+n );
+    }
+    if (aNewSnap!=rSnap) {
+        if (aNewSnap.GetSize()==rSnap.GetSize()) {
+            NbcMove(Size(aNewSnap.Left()-rSnap.Left(),aNewSnap.Top()-rSnap.Top()));
+        } else {
+            NbcSetSnapRect(aNewSnap);
+        }
+    }
+
+    if (rAttr.GetItemState(SDRATTR_SHEARANGLE,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrShearAngleItem*>(pPoolItem)->GetValue();
+        n-=GetShearAngle();
+        if (n!=0) {
+            double nTan = tan(n * F_PI18000);
+            NbcShear(aRef1,n,nTan,false);
+        }
+    }
+    if (rAttr.GetItemState(SDRATTR_ROTATEANGLE,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrAngleItem*>(pPoolItem)->GetValue();
+        n-=GetRotateAngle();
+        if (n!=0) {
+            double nSin = sin(n * F_PI18000);
+            double nCos = cos(n * F_PI18000);
+            NbcRotate(aRef1,n,nSin,nCos);
+        }
+    }
+    if (rAttr.GetItemState(SDRATTR_ROTATEONE,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrRotateOneItem*>(pPoolItem)->GetValue();
+        double nSin = sin(n * F_PI18000);
+        double nCos = cos(n * F_PI18000);
+        NbcRotate(aRef1,n,nSin,nCos);
+    }
+    if (rAttr.GetItemState(SDRATTR_HORZSHEARONE,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrHorzShearOneItem*>(pPoolItem)->GetValue();
+        double nTan = tan(n * F_PI18000);
+        NbcShear(aRef1,n,nTan,false);
+    }
+    if (rAttr.GetItemState(SDRATTR_VERTSHEARONE,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrVertShearOneItem*>(pPoolItem)->GetValue();
+        double nTan = tan(n * F_PI18000);
+        NbcShear(aRef1,n,nTan,true);
+    }
+
+    if (rAttr.GetItemState(SDRATTR_OBJMOVEPROTECT,true,&pPoolItem)==SfxItemState::SET) {
+        bool b=static_cast<const SdrYesNoItem*>(pPoolItem)->GetValue();
+        SetMoveProtect(b);
+    }
+    if (rAttr.GetItemState(SDRATTR_OBJSIZEPROTECT,true,&pPoolItem)==SfxItemState::SET) {
+        bool b=static_cast<const SdrYesNoItem*>(pPoolItem)->GetValue();
+        SetResizeProtect(b);
+    }
+
+    /* move protect always sets size protect */
+    if( IsMoveProtect() )
+        SetResizeProtect( true );
+
+    if (rAttr.GetItemState(SDRATTR_OBJPRINTABLE,true,&pPoolItem)==SfxItemState::SET) {
+        bool b=static_cast<const SdrObjPrintableItem*>(pPoolItem)->GetValue();
+        SetPrintable(b);
+    }
+
+    if (rAttr.GetItemState(SDRATTR_OBJVISIBLE,true,&pPoolItem)==SfxItemState::SET) {
+        bool b=static_cast<const SdrObjVisibleItem*>(pPoolItem)->GetValue();
+        SetVisible(b);
+    }
+
+    SdrLayerID nLayer=SDRLAYER_NOTFOUND;
+    if (rAttr.GetItemState(SDRATTR_LAYERID,true,&pPoolItem)==SfxItemState::SET) {
+        nLayer=static_cast<const SdrLayerIdItem*>(pPoolItem)->GetValue();
+    }
+    if (rAttr.GetItemState(SDRATTR_LAYERNAME,true,&pPoolItem)==SfxItemState::SET)
+    {
+        OUString aLayerName = static_cast<const SdrLayerNameItem*>(pPoolItem)->GetValue();
+        const SdrLayerAdmin& rLayAd(nullptr != getSdrPageFromSdrObject()
+            ? getSdrPageFromSdrObject()->GetLayerAdmin()
+            : getSdrModelFromSdrObject().GetLayerAdmin());
+        const SdrLayer* pLayer = rLayAd.GetLayer(aLayerName);
+
+        if(nullptr != pLayer)
+        {
+            nLayer=pLayer->GetID();
+        }
+    }
+    if (nLayer!=SDRLAYER_NOTFOUND) {
+        NbcSetLayer(nLayer);
+    }
+
+    if (rAttr.GetItemState(SDRATTR_OBJECTNAME,true,&pPoolItem)==SfxItemState::SET) {
+        OUString aName=static_cast<const SfxStringItem*>(pPoolItem)->GetValue();
+        SetName(aName);
+    }
+    tools::Rectangle aNewLogic(rLogic);
+    if (rAttr.GetItemState(SDRATTR_LOGICSIZEWIDTH,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrLogicSizeWidthItem*>(pPoolItem)->GetValue();
+        aNewLogic.SetRight(aNewLogic.Left()+n );
+    }
+    if (rAttr.GetItemState(SDRATTR_LOGICSIZEHEIGHT,true,&pPoolItem)==SfxItemState::SET) {
+        long n=static_cast<const SdrLogicSizeHeightItem*>(pPoolItem)->GetValue();
+        aNewLogic.SetBottom(aNewLogic.Top()+n );
+    }
+    if (aNewLogic!=rLogic) {
+        NbcSetLogicRect(aNewLogic);
+    }
+    Fraction aResizeX(1,1);
+    Fraction aResizeY(1,1);
+    if (rAttr.GetItemState(SDRATTR_RESIZEXONE,true,&pPoolItem)==SfxItemState::SET) {
+        aResizeX*=static_cast<const SdrResizeXOneItem*>(pPoolItem)->GetValue();
+    }
+    if (rAttr.GetItemState(SDRATTR_RESIZEYONE,true,&pPoolItem)==SfxItemState::SET) {
+        aResizeY*=static_cast<const SdrResizeYOneItem*>(pPoolItem)->GetValue();
+    }
+    if (aResizeX!=Fraction(1,1) || aResizeY!=Fraction(1,1)) {
+        NbcResize(aRef1,aResizeX,aResizeY);
+    }
+}
+
+void SdrObject::TakeNotPersistAttr(SfxItemSet& rAttr) const
+{
+    const tools::Rectangle& rSnap=GetSnapRect();
+    const tools::Rectangle& rLogic=GetLogicRect();
+    rAttr.Put(SdrYesNoItem(SDRATTR_OBJMOVEPROTECT, IsMoveProtect()));
+    rAttr.Put(SdrYesNoItem(SDRATTR_OBJSIZEPROTECT, IsResizeProtect()));
+    rAttr.Put(SdrObjPrintableItem(IsPrintable()));
+    rAttr.Put(SdrObjVisibleItem(IsVisible()));
+    rAttr.Put(SdrAngleItem(SDRATTR_ROTATEANGLE, GetRotateAngle()));
+    rAttr.Put(SdrShearAngleItem(GetShearAngle()));
+    rAttr.Put(SdrOneSizeWidthItem(rSnap.GetWidth()-1));
+    rAttr.Put(SdrOneSizeHeightItem(rSnap.GetHeight()-1));
+    rAttr.Put(SdrOnePositionXItem(rSnap.Left()));
+    rAttr.Put(SdrOnePositionYItem(rSnap.Top()));
+    if (rLogic.GetWidth()!=rSnap.GetWidth()) {
+        rAttr.Put(SdrLogicSizeWidthItem(rLogic.GetWidth()-1));
+    }
+    if (rLogic.GetHeight()!=rSnap.GetHeight()) {
+        rAttr.Put(SdrLogicSizeHeightItem(rLogic.GetHeight()-1));
+    }
+    OUString aName(GetName());
+
+    if (!aName.isEmpty())
+    {
+        rAttr.Put(SfxStringItem(SDRATTR_OBJECTNAME, aName));
+    }
+
+    rAttr.Put(SdrLayerIdItem(GetLayer()));
+    const SdrLayerAdmin& rLayAd(nullptr != getSdrPageFromSdrObject()
+        ? getSdrPageFromSdrObject()->GetLayerAdmin()
+        : getSdrModelFromSdrObject().GetLayerAdmin());
+    const SdrLayer* pLayer = rLayAd.GetLayerPerID(GetLayer());
+    if(nullptr != pLayer)
+    {
+        rAttr.Put(SdrLayerNameItem(pLayer->GetName()));
+    }
+    Point aRef1(rSnap.Center());
+    Point aRef2(aRef1); aRef2.AdjustY( 1 );
+    rAttr.Put(SdrTransformRef1XItem(aRef1.X()));
+    rAttr.Put(SdrTransformRef1YItem(aRef1.Y()));
+    rAttr.Put(SdrTransformRef2XItem(aRef2.X()));
+    rAttr.Put(SdrTransformRef2YItem(aRef2.Y()));
+}
+
+SfxStyleSheet* SdrObject::GetStyleSheet() const
+{
+    return GetProperties().GetStyleSheet();
+}
+
+void SdrObject::SetStyleSheet(SfxStyleSheet* pNewStyleSheet, bool bDontRemoveHardAttr)
+{
+    tools::Rectangle aBoundRect0;
+
+    if(pUserCall)
+        aBoundRect0 = GetLastBoundRect();
+
+    NbcSetStyleSheet(pNewStyleSheet, bDontRemoveHardAttr);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::ChangeAttr, aBoundRect0);
+}
+
+void SdrObject::NbcSetStyleSheet(SfxStyleSheet* pNewStyleSheet, bool bDontRemoveHardAttr)
+{
+    GetProperties().SetStyleSheet(pNewStyleSheet, bDontRemoveHardAttr);
+}
+
+// Broadcasting while setting attributes is managed by the AttrObj.
+
+
+SdrGluePoint SdrObject::GetVertexGluePoint(sal_uInt16 nPosNum) const
+{
+    // #i41936# Use SnapRect for default GluePoints
+    const tools::Rectangle aR(GetSnapRect());
+    Point aPt;
+
+    switch(nPosNum)
+    {
+        case 0 : aPt = aR.TopCenter();    break;
+        case 1 : aPt = aR.RightCenter();  break;
+        case 2 : aPt = aR.BottomCenter(); break;
+        case 3 : aPt = aR.LeftCenter();   break;
+    }
+
+    aPt -= aR.Center();
+    SdrGluePoint aGP(aPt);
+    aGP.SetPercent(false);
+
+    return aGP;
+}
+
+SdrGluePoint SdrObject::GetCornerGluePoint(sal_uInt16 nPosNum) const
+{
+    tools::Rectangle aR(GetCurrentBoundRect());
+    Point aPt;
+    switch (nPosNum) {
+        case 0 : aPt=aR.TopLeft();     break;
+        case 1 : aPt=aR.TopRight();    break;
+        case 2 : aPt=aR.BottomRight(); break;
+        case 3 : aPt=aR.BottomLeft();  break;
+    }
+    aPt-=GetSnapRect().Center();
+    SdrGluePoint aGP(aPt);
+    aGP.SetPercent(false);
+    return aGP;
+}
+
+const SdrGluePointList* SdrObject::GetGluePointList() const
+{
+    if (pPlusData!=nullptr) return pPlusData->pGluePoints.get();
+    return nullptr;
+}
+
+
+SdrGluePointList* SdrObject::ForceGluePointList()
+{
+    ImpForcePlusData();
+    if (pPlusData->pGluePoints==nullptr) {
+        pPlusData->pGluePoints.reset(new SdrGluePointList);
+    }
+    return pPlusData->pGluePoints.get();
+}
+
+void SdrObject::SetGlueReallyAbsolute(bool bOn)
+{
+    // First a const call to see whether there are any glue points.
+    // Force const call!
+    if (GetGluePointList()!=nullptr) {
+        SdrGluePointList* pGPL=ForceGluePointList();
+        pGPL->SetReallyAbsolute(bOn,*this);
+    }
+}
+
+void SdrObject::NbcRotateGluePoints(const Point& rRef, long nAngle, double sn, double cs)
+{
+    // First a const call to see whether there are any glue points.
+    // Force const call!
+    if (GetGluePointList()!=nullptr) {
+        SdrGluePointList* pGPL=ForceGluePointList();
+        pGPL->Rotate(rRef,nAngle,sn,cs,this);
+    }
+}
+
+void SdrObject::NbcMirrorGluePoints(const Point& rRef1, const Point& rRef2)
+{
+    // First a const call to see whether there are any glue points.
+    // Force const call!
+    if (GetGluePointList()!=nullptr) {
+        SdrGluePointList* pGPL=ForceGluePointList();
+        pGPL->Mirror(rRef1,rRef2,this);
+    }
+}
+
+void SdrObject::NbcShearGluePoints(const Point& rRef, double tn, bool bVShear)
+{
+    // First a const call to see whether there are any glue points.
+    // Force const call!
+    if (GetGluePointList()!=nullptr) {
+        SdrGluePointList* pGPL=ForceGluePointList();
+        pGPL->Shear(rRef,tn,bVShear,this);
+    }
+}
+
+void SdrObject::ConnectToNode(bool /*bTail1*/, SdrObject* /*pObj*/)
+{
+}
+
+void SdrObject::DisconnectFromNode(bool /*bTail1*/)
+{
+}
+
+SdrObject* SdrObject::GetConnectedNode(bool /*bTail1*/) const
+{
+    return nullptr;
+}
+
+
+static void extractLineContourFromPrimitive2DSequence(
+    const drawinglayer::primitive2d::Primitive2DContainer& rxSequence,
+    basegfx::B2DPolygonVector& rExtractedHairlines,
+    basegfx::B2DPolyPolygonVector& rExtractedLineFills)
+{
+    rExtractedHairlines.clear();
+    rExtractedLineFills.clear();
+
+    if(!rxSequence.empty())
+    {
+        // use neutral ViewInformation
+        const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+
+        // create extractor, process and get result
+        drawinglayer::processor2d::LineGeometryExtractor2D aExtractor(aViewInformation2D);
+        aExtractor.process(rxSequence);
+
+        // copy line results
+        rExtractedHairlines = aExtractor.getExtractedHairlines();
+
+        // copy fill rsults
+        rExtractedLineFills = aExtractor.getExtractedLineFills();
+    }
+}
+
+
+SdrObject* SdrObject::ImpConvertToContourObj(bool bForceLineDash)
+{
+    SdrObject* pRetval(nullptr);
+
+    if(LineGeometryUsageIsNecessary())
+    {
+        basegfx::B2DPolyPolygon aMergedLineFillPolyPolygon;
+        basegfx::B2DPolyPolygon aMergedHairlinePolyPolygon;
+        const drawinglayer::primitive2d::Primitive2DContainer & xSequence(GetViewContact().getViewIndependentPrimitive2DContainer());
+
+        if(!xSequence.empty())
+        {
+            basegfx::B2DPolygonVector aExtractedHairlines;
+            basegfx::B2DPolyPolygonVector aExtractedLineFills;
+
+            extractLineContourFromPrimitive2DSequence(xSequence, aExtractedHairlines, aExtractedLineFills);
+
+            // for SdrObject creation, just copy all to a single Hairline-PolyPolygon
+            for(const basegfx::B2DPolygon & rExtractedHairline : aExtractedHairlines)
+            {
+                aMergedHairlinePolyPolygon.append(rExtractedHairline);
+            }
+
+            // check for fill rsults
+            if (!aExtractedLineFills.empty() && !utl::ConfigManager::IsFuzzing())
+            {
+                // merge to a single tools::PolyPolygon (OR)
+                aMergedLineFillPolyPolygon = basegfx::utils::mergeToSinglePolyPolygon(aExtractedLineFills);
+            }
+        }
+
+        if(aMergedLineFillPolyPolygon.count() || (bForceLineDash && aMergedHairlinePolyPolygon.count()))
+        {
+            SfxItemSet aSet(GetMergedItemSet());
+            drawing::FillStyle eOldFillStyle = aSet.Get(XATTR_FILLSTYLE).GetValue();
+            SdrPathObj* aLinePolygonPart = nullptr;
+            SdrPathObj* aLineHairlinePart = nullptr;
+            bool bBuildGroup(false);
+
+            if(aMergedLineFillPolyPolygon.count())
+            {
+                // create SdrObject for filled line geometry
+                aLinePolygonPart = new SdrPathObj(
+                    getSdrModelFromSdrObject(),
+                    OBJ_PATHFILL,
+                    aMergedLineFillPolyPolygon);
+
+                // correct item properties
+                aSet.Put(XLineWidthItem(0));
+                aSet.Put(XLineStyleItem(drawing::LineStyle_NONE));
+                Color aColorLine = aSet.Get(XATTR_LINECOLOR).GetColorValue();
+                sal_uInt16 nTransLine = aSet.Get(XATTR_LINETRANSPARENCE).GetValue();
+                aSet.Put(XFillColorItem(OUString(), aColorLine));
+                aSet.Put(XFillStyleItem(drawing::FillStyle_SOLID));
+                aSet.Put(XFillTransparenceItem(nTransLine));
+
+                aLinePolygonPart->SetMergedItemSet(aSet);
+            }
+
+            if(aMergedHairlinePolyPolygon.count())
+            {
+                // create SdrObject for hairline geometry
+                // OBJ_PATHLINE is necessary here, not OBJ_PATHFILL. This is intended
+                // to get a non-filled object. If the poly is closed, the PathObj takes care for
+                // the correct closed state.
+                aLineHairlinePart = new SdrPathObj(
+                    getSdrModelFromSdrObject(),
+                    OBJ_PATHLINE,
+                    aMergedHairlinePolyPolygon);
+
+                aSet.Put(XLineWidthItem(0));
+                aSet.Put(XFillStyleItem(drawing::FillStyle_NONE));
+                aSet.Put(XLineStyleItem(drawing::LineStyle_SOLID));
+
+                // it is also necessary to switch off line start and ends here
+                aSet.Put(XLineStartWidthItem(0));
+                aSet.Put(XLineEndWidthItem(0));
+
+                aLineHairlinePart->SetMergedItemSet(aSet);
+
+                if(aLinePolygonPart)
+                {
+                    bBuildGroup = true;
+                }
+            }
+
+            // check if original geometry should be added (e.g. filled and closed)
+            bool bAddOriginalGeometry(false);
+            SdrPathObj* pPath = dynamic_cast<SdrPathObj*>(this);
+
+            if(pPath && pPath->IsClosed())
+            {
+                if(eOldFillStyle != drawing::FillStyle_NONE)
+                {
+                    bAddOriginalGeometry = true;
+                }
+            }
+
+            // do we need a group?
+            if(bBuildGroup || bAddOriginalGeometry)
+            {
+                SdrObject* pGroup = new SdrObjGroup(getSdrModelFromSdrObject());
+
+                if(bAddOriginalGeometry)
+                {
+                    // Add a clone of the original geometry.
+                    aSet.ClearItem();
+                    aSet.Put(GetMergedItemSet());
+                    aSet.Put(XLineStyleItem(drawing::LineStyle_NONE));
+                    aSet.Put(XLineWidthItem(0));
+
+                    SdrObject* pClone(CloneSdrObject(getSdrModelFromSdrObject()));
+                    pClone->SetMergedItemSet(aSet);
+
+                    pGroup->GetSubList()->NbcInsertObject(pClone);
+                }
+
+                if(aLinePolygonPart)
+                {
+                    pGroup->GetSubList()->NbcInsertObject(aLinePolygonPart);
+                }
+
+                if(aLineHairlinePart)
+                {
+                    pGroup->GetSubList()->NbcInsertObject(aLineHairlinePart);
+                }
+
+                pRetval = pGroup;
+            }
+            else
+            {
+                if(aLinePolygonPart)
+                {
+                    pRetval = aLinePolygonPart;
+                }
+                else if(aLineHairlinePart)
+                {
+                    pRetval = aLineHairlinePart;
+                }
+            }
+        }
+    }
+
+    if(nullptr == pRetval)
+    {
+        // due to current method usage, create and return a clone when nothing has changed
+        SdrObject* pClone(CloneSdrObject(getSdrModelFromSdrObject()));
+        pRetval = pClone;
+    }
+
+    return pRetval;
+}
+
+
+void SdrObject::SetMarkProtect(bool bProt)
+{
+    bMarkProt = bProt;
+}
+
+
+void SdrObject::SetEmptyPresObj(bool bEpt)
+{
+    bEmptyPresObj = bEpt;
+}
+
+
+void SdrObject::SetNotVisibleAsMaster(bool bFlg)
+{
+    bNotVisibleAsMaster=bFlg;
+}
+
+
+// convert this path object to contour object, even when it is a group
+SdrObject* SdrObject::ConvertToContourObj(SdrObject* pRet, bool bForceLineDash) const
+{
+    if(dynamic_cast<const SdrObjGroup*>( pRet) !=  nullptr)
+    {
+        SdrObjList* pObjList2 = pRet->GetSubList();
+        SdrObject* pGroup = new SdrObjGroup(getSdrModelFromSdrObject());
+
+        for(size_t a=0; a<pObjList2->GetObjCount(); ++a)
+        {
+            SdrObject* pIterObj = pObjList2->GetObj(a);
+            pGroup->GetSubList()->NbcInsertObject(ConvertToContourObj(pIterObj, bForceLineDash));
+        }
+
+        pRet = pGroup;
+    }
+    else
+    {
+        if (SdrPathObj *pPathObj = dynamic_cast<SdrPathObj*>(pRet))
+        {
+            // bezier geometry got created, even for straight edges since the given
+            // object is a result of DoConvertToPolyObj. For conversion to contour
+            // this is not really needed and can be reduced again AFAP
+            pPathObj->SetPathPoly(basegfx::utils::simplifyCurveSegments(pPathObj->GetPathPoly()));
+        }
+
+        pRet = pRet->ImpConvertToContourObj(bForceLineDash);
+    }
+
+    // #i73441# preserve LayerID
+    if(pRet && pRet->GetLayer() != GetLayer())
+    {
+        pRet->SetLayer(GetLayer());
+    }
+
+    return pRet;
+}
+
+
+SdrObjectUniquePtr SdrObject::ConvertToPolyObj(bool bBezier, bool bLineToArea) const
+{
+    SdrObjectUniquePtr pRet = DoConvertToPolyObj(bBezier, true);
+
+    if(pRet && bLineToArea)
+    {
+        SdrObject* pNewRet = ConvertToContourObj(pRet.get());
+        pRet.reset(pNewRet);
+    }
+
+    // #i73441# preserve LayerID
+    if(pRet && pRet->GetLayer() != GetLayer())
+    {
+        pRet->SetLayer(GetLayer());
+    }
+
+    return pRet;
+}
+
+
+SdrObjectUniquePtr SdrObject::DoConvertToPolyObj(bool /*bBezier*/, bool /*bAddText*/) const
+{
+    return nullptr;
+}
+
+
+void SdrObject::InsertedStateChange()
+{
+    const bool bIsInserted(nullptr != getParentSdrObjListFromSdrObject());
+    const tools::Rectangle aBoundRect0(GetLastBoundRect());
+
+    if(bIsInserted)
+    {
+        SendUserCall(SdrUserCallType::Inserted, aBoundRect0);
+    }
+    else
+    {
+        SendUserCall(SdrUserCallType::Removed, aBoundRect0);
+    }
+
+    if(nullptr != pPlusData && nullptr != pPlusData->pBroadcast)
+    {
+        SdrHint aHint(bIsInserted ? SdrHintKind::ObjectInserted : SdrHintKind::ObjectRemoved, *this);
+        pPlusData->pBroadcast->Broadcast(aHint);
+    }
+}
+
+void SdrObject::SetMoveProtect(bool bProt)
+{
+    if(IsMoveProtect() != bProt)
+    {
+        // #i77187# secured and simplified
+        bMovProt = bProt;
+        SetChanged();
+        BroadcastObjectChange();
+    }
+}
+
+void SdrObject::SetResizeProtect(bool bProt)
+{
+    if(IsResizeProtect() != bProt)
+    {
+        // #i77187# secured and simplified
+        bSizProt = bProt;
+        SetChanged();
+        BroadcastObjectChange();
+    }
+}
+
+void SdrObject::SetPrintable(bool bPrn)
+{
+    if( bPrn == bNoPrint )
+    {
+        bNoPrint=!bPrn;
+        SetChanged();
+        if (IsInserted())
+        {
+            SdrHint aHint(SdrHintKind::ObjectChange, *this);
+            getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+    }
+}
+
+void SdrObject::SetVisible(bool bVisible)
+{
+    if( bVisible != mbVisible )
+    {
+        mbVisible = bVisible;
+        SetChanged();
+        if (IsInserted())
+        {
+            SdrHint aHint(SdrHintKind::ObjectChange, *this);
+            getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+    }
+}
+
+
+sal_uInt16 SdrObject::GetUserDataCount() const
+{
+    if (pPlusData==nullptr || pPlusData->pUserDataList==nullptr) return 0;
+    return pPlusData->pUserDataList->GetUserDataCount();
+}
+
+SdrObjUserData* SdrObject::GetUserData(sal_uInt16 nNum) const
+{
+    if (pPlusData==nullptr || pPlusData->pUserDataList==nullptr) return nullptr;
+    return &pPlusData->pUserDataList->GetUserData(nNum);
+}
+
+void SdrObject::AppendUserData(std::unique_ptr<SdrObjUserData> pData)
+{
+    if (!pData)
+    {
+        OSL_FAIL("SdrObject::AppendUserData(): pData is NULL pointer.");
+        return;
+    }
+
+    ImpForcePlusData();
+    if (!pPlusData->pUserDataList)
+        pPlusData->pUserDataList.reset( new SdrObjUserDataList );
+
+    pPlusData->pUserDataList->AppendUserData(std::move(pData));
+}
+
+void SdrObject::DeleteUserData(sal_uInt16 nNum)
+{
+    sal_uInt16 nCount=GetUserDataCount();
+    if (nNum<nCount) {
+        pPlusData->pUserDataList->DeleteUserData(nNum);
+        if (nCount==1)  {
+            pPlusData->pUserDataList.reset();
+        }
+    } else {
+        OSL_FAIL("SdrObject::DeleteUserData(): Invalid Index.");
+    }
+}
+
+void SdrObject::SetUserCall(SdrObjUserCall* pUser)
+{
+    pUserCall = pUser;
+}
+
+
+void SdrObject::SendUserCall(SdrUserCallType eUserCall, const tools::Rectangle& rBoundRect) const
+{
+    SdrObject* pGroup(getParentSdrObjectFromSdrObject());
+
+    if ( pUserCall )
+    {
+        pUserCall->Changed( *this, eUserCall, rBoundRect );
+    }
+
+    if(nullptr != pGroup && pGroup->GetUserCall())
+    {
+        // broadcast to group
+        SdrUserCallType eChildUserType = SdrUserCallType::ChildChangeAttr;
+
+        switch( eUserCall )
+        {
+            case SdrUserCallType::MoveOnly:
+                eChildUserType = SdrUserCallType::ChildMoveOnly;
+            break;
+
+            case SdrUserCallType::Resize:
+                eChildUserType = SdrUserCallType::ChildResize;
+            break;
+
+            case SdrUserCallType::ChangeAttr:
+                eChildUserType = SdrUserCallType::ChildChangeAttr;
+            break;
+
+            case SdrUserCallType::Delete:
+                eChildUserType = SdrUserCallType::ChildDelete;
+            break;
+
+            case SdrUserCallType::Inserted:
+                eChildUserType = SdrUserCallType::ChildInserted;
+            break;
+
+            case SdrUserCallType::Removed:
+                eChildUserType = SdrUserCallType::ChildRemoved;
+            break;
+
+            default: break;
+        }
+
+        pGroup->GetUserCall()->Changed( *this, eChildUserType, rBoundRect );
+    }
+
+    // notify our UNO shape listeners
+    switch ( eUserCall )
+    {
+    case SdrUserCallType::Resize:
+        notifyShapePropertyChange( svx::ShapeProperty::Size );
+        [[fallthrough]]; // RESIZE might also imply a change of the position
+    case SdrUserCallType::MoveOnly:
+        notifyShapePropertyChange( svx::ShapeProperty::Position );
+        break;
+    default:
+        // not interested in
+        break;
+    }
+}
+
+void SdrObject::impl_setUnoShape( const uno::Reference< uno::XInterface >& _rxUnoShape )
+{
+    const uno::Reference< uno::XInterface>& xOldUnoShape( maWeakUnoShape );
+    // the UNO shape would be gutted by the following code; return early
+    if ( _rxUnoShape == xOldUnoShape )
+    {
+        if ( !xOldUnoShape.is() )
+        {
+            // make sure there is no stale impl. pointer if the UNO
+            // shape was destroyed meanwhile (remember we only hold weak
+            // reference to it!)
+            mpSvxShape = nullptr;
+        }
+        return;
+    }
+
+    bool bTransferOwnership( false );
+    if ( xOldUnoShape.is() )
+    {
+        bTransferOwnership = mpSvxShape->HasSdrObjectOwnership();
+        // Remove yourself from the current UNO shape. Its destructor
+        // will reset our UNO shape otherwise.
+        mpSvxShape->InvalidateSdrObject();
+    }
+
+    maWeakUnoShape = _rxUnoShape;
+    mpSvxShape = comphelper::getUnoTunnelImplementation<SvxShape>( _rxUnoShape );
+
+    // I think this may never happen... But I am not sure enough .-)
+    if ( bTransferOwnership )
+    {
+        if (mpSvxShape)
+            mpSvxShape->TakeSdrObjectOwnership();
+        SAL_WARN( "svx.uno", "a UNO shape took over an SdrObject previously owned by another UNO shape!");
+    }
+}
+
+/** only for internal use! */
+SvxShape* SdrObject::getSvxShape()
+{
+    DBG_TESTSOLARMUTEX();
+        // retrieving the impl pointer and subsequently using it is not thread-safe, of course, so it needs to be
+        // guarded by the SolarMutex
+
+    uno::Reference< uno::XInterface > xShape( maWeakUnoShape );
+#if OSL_DEBUG_LEVEL > 0
+    OSL_ENSURE( !( !xShape.is() && mpSvxShape ),
+        "SdrObject::getSvxShape: still having IMPL-Pointer to dead object!" );
+#endif
+    //#113608#, make sure mpSvxShape is always synchronized with maWeakUnoShape
+    if ( mpSvxShape && !xShape.is() )
+        mpSvxShape = nullptr;
+
+    return mpSvxShape;
+}
+
+css::uno::Reference< css::uno::XInterface > SdrObject::getUnoShape()
+{
+    // try weak reference first
+    uno::Reference< uno::XInterface > xShape( getWeakUnoShape() );
+    if( !xShape.is() )
+    {
+        OSL_ENSURE( mpSvxShape == nullptr, "SdrObject::getUnoShape: XShape already dead, but still an IMPL pointer!" );
+
+        // try to access SdrPage from this SdrObject. This will only exist if the SdrObject is
+        // inserted in a SdrObjList (page/group/3dScene)
+        SdrPage* pPageCandidate(getSdrPageFromSdrObject());
+
+        // tdf#12152, tdf#120728
+        //
+        // With the paradigm change to only get a SdrPage for a SdrObject when the SdrObject
+        // is *inserted*, the functionality for creating 1:1 associated UNO API implementation
+        // SvxShapes was partially broken: The used ::CreateShape relies on the SvxPage being
+        // derived and the CreateShape method overloaded, implementing additional SdrInventor
+        // types as needed.
+        //
+        // The fallback to use SvxDrawPage::CreateShapeByTypeAndInventor is a trap: It's only
+        // a static fallback that handles the SdrInventor types SdrInventor::E3d and
+        // SdrInventor::Default. Due to that, e.g. the ReportDesigner broke in various conditions.
+        //
+        // That again has to do with the ReportDesigner being implemented using the UNO API
+        // aspects of SdrObjects early during their construction, not just after these are
+        // inserted to a SdrPage - but that is not illegal or wrong, the SdrObject exists already.
+        //
+        // As a current solution, use the (now always available) SdrModel and any of the
+        // existing SdrPages. The only important thing is to get a SdrPage where ::CreateShape is
+        // overloaded and implemented as needed.
+        //
+        // Note for the future:
+        // In a more ideal world there would be only one factory method for creating SdrObjects (not
+        // ::CreateShape and ::CreateShapeByTypeAndInventor). This also would not be placed at
+        // SdrPage/SvxPage at all, but at the Model where it belongs - where else would you expect
+        // objects for the current Model to be constructed? To have this at the Page only would make
+        // sense if different shapes would need to be constructed for different Pages in the same Model
+        // - this is never the case.
+        // At that Model extended functionality for that factory (or overloads and implementations)
+        // should be placed. But to be realistic, migrating the factories to Model now is too much
+        // work - maybe over time when melting SdrObject/SvxObject one day...
+        if(nullptr == pPageCandidate)
+        {
+            // If not inserted, alternatively access a SdrPage using the SdrModel. There is
+            // no reason not to create and return a UNO API XShape when the SdrObject is not
+            // inserted - it may be in construction. Main paradigm is that it exists.
+            if(0 != getSdrModelFromSdrObject().GetPageCount())
+            {
+                // Take 1st SdrPage. That may be e.g. a special page (in SD), but the
+                // to-be-used method ::CreateShape will be correctly overloaded in
+                // all cases
+                pPageCandidate = getSdrModelFromSdrObject().GetPage(0);
+            }
+        }
+
+        if(nullptr != pPageCandidate)
+        {
+            uno::Reference< uno::XInterface > xPage(pPageCandidate->getUnoPage());
+            if( xPage.is() )
+            {
+                SvxDrawPage* pDrawPage = comphelper::getUnoTunnelImplementation<SvxDrawPage>(xPage);
+                if( pDrawPage )
+                {
+                    // create one
+                    xShape = pDrawPage->CreateShape( this );
+                    impl_setUnoShape( xShape );
+                }
+            }
+        }
+        else
+        {
+            // Fallback to static base functionality. CAUTION: This will only support
+            // the most basic stuff like SdrInventor::E3d and SdrInventor::Default. All
+            // the other SdrInventor enum entries are from overloads and are *not accessible*
+            // using this fallback (!) - what a bad trap
+            mpSvxShape = SvxDrawPage::CreateShapeByTypeAndInventor( GetObjIdentifier(), GetObjInventor(), this );
+            maWeakUnoShape = xShape = static_cast< ::cppu::OWeakObject* >( mpSvxShape );
+        }
+    }
+
+    return xShape;
+}
+
+void SdrObject::setUnoShape(const uno::Reference<uno::XInterface >& _rxUnoShape)
+{
+    impl_setUnoShape( _rxUnoShape );
+}
+
+svx::PropertyChangeNotifier& SdrObject::getShapePropertyChangeNotifier()
+{
+    DBG_TESTSOLARMUTEX();
+
+    SvxShape* pSvxShape = getSvxShape();
+    ENSURE_OR_THROW( pSvxShape, "no SvxShape, yet!" );
+    return pSvxShape->getShapePropertyChangeNotifier();
+}
+
+void SdrObject::notifyShapePropertyChange( const svx::ShapeProperty _eProperty ) const
+{
+    DBG_TESTSOLARMUTEX();
+
+    SvxShape* pSvxShape = const_cast< SdrObject* >( this )->getSvxShape();
+    if ( pSvxShape )
+        return pSvxShape->getShapePropertyChangeNotifier().notifyPropertyChange( _eProperty );
+}
+
+
+// transformation interface for StarOfficeAPI. This implements support for
+// homogeneous 3x3 matrices containing the transformation of the SdrObject. At the
+// moment it contains a shearX, rotation and translation, but for setting all linear
+// transforms like Scale, ShearX, ShearY, Rotate and Translate are supported.
+
+
+// gets base transformation and rectangle of object. If it's an SdrPathObj it fills the PolyPolygon
+// with the base geometry and returns TRUE. Otherwise it returns FALSE.
+bool SdrObject::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const
+{
+    // any kind of SdrObject, just use SnapRect
+    tools::Rectangle aRectangle(GetSnapRect());
+
+    // convert to transformation values
+    basegfx::B2DTuple aScale(aRectangle.GetWidth(), aRectangle.GetHeight());
+    basegfx::B2DTuple aTranslate(aRectangle.Left(), aRectangle.Top());
+
+    // position maybe relative to anchorpos, convert
+    if(getSdrModelFromSdrObject().IsWriter())
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build matrix
+    rMatrix = basegfx::utils::createScaleTranslateB2DHomMatrix(aScale, aTranslate);
+
+    return false;
+}
+
+// sets the base geometry of the object using infos contained in the homogeneous 3x3 matrix.
+// If it's an SdrPathObj it will use the provided geometry information. The Polygon has
+// to use (0,0) as upper left and will be scaled to the given size in the matrix.
+void SdrObject::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/)
+{
+    // break up matrix
+    basegfx::B2DTuple aScale;
+    basegfx::B2DTuple aTranslate;
+    double fRotate, fShearX;
+    rMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings
+    // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly
+    if(basegfx::fTools::less(aScale.getX(), 0.0) && basegfx::fTools::less(aScale.getY(), 0.0))
+    {
+        aScale.setX(fabs(aScale.getX()));
+        aScale.setY(fabs(aScale.getY()));
+    }
+
+    // if anchor is used, make position relative to it
+    if(getSdrModelFromSdrObject().IsWriter())
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build BaseRect
+    Point aPoint(FRound(aTranslate.getX()), FRound(aTranslate.getY()));
+    tools::Rectangle aBaseRect(aPoint, Size(FRound(aScale.getX()), FRound(aScale.getY())));
+
+    // set BaseRect
+    SetSnapRect(aBaseRect);
+}
+
+// Give info if object is in destruction
+bool SdrObject::IsInDestruction() const
+{
+    return getSdrModelFromSdrObject().IsInDestruction();
+}
+
+// return if fill is != drawing::FillStyle_NONE
+bool SdrObject::HasFillStyle() const
+{
+    return GetObjectItem(XATTR_FILLSTYLE).GetValue() != drawing::FillStyle_NONE;
+}
+
+bool SdrObject::HasLineStyle() const
+{
+    return GetObjectItem(XATTR_LINESTYLE).GetValue() != drawing::LineStyle_NONE;
+}
+
+
+// #i52224#
+// on import of OLE object from MS documents the BLIP size might be retrieved,
+// the following four methods are used to control it;
+// usually this data makes no sense after the import is finished, since the object
+// might be resized
+
+
+void SdrObject::SetBLIPSizeRectangle( const tools::Rectangle& aRect )
+{
+    maBLIPSizeRectangle = aRect;
+}
+
+void SdrObject::SetContextWritingMode( const sal_Int16 /*_nContextWritingMode*/ )
+{
+    // this base class does not support different writing modes, so ignore the call
+}
+
+void SdrObject::SetDoNotInsertIntoPageAutomatically(const bool bSet)
+{
+    mbDoNotInsertIntoPageAutomatically = bSet;
+}
+
+
+// #i121917#
+bool SdrObject::HasText() const
+{
+    return false;
+}
+
+bool SdrObject::IsTextBox() const
+{
+    return false;
+}
+
+void SdrObject::MakeNameUnique()
+{
+    std::unordered_set<OUString> aNameSet;
+    MakeNameUnique(aNameSet);
+}
+
+void SdrObject::MakeNameUnique(std::unordered_set<OUString>& rNameSet)
+{
+    if (GetName().isEmpty())
+        return;
+
+    if (rNameSet.empty())
+    {
+        SdrPage* pPage;
+        SdrObject* pObj;
+        for (sal_uInt16 nPage(0); nPage < mrSdrModelFromSdrObject.GetPageCount(); ++nPage)
+        {
+            pPage = mrSdrModelFromSdrObject.GetPage(nPage);
+            SdrObjListIter aIter(pPage, SdrIterMode::DeepWithGroups);
+            while (aIter.IsMore())
+            {
+                pObj = aIter.Next();
+                if (pObj != this)
+                    rNameSet.insert(pObj->GetName());
+            }
+        }
+    }
+
+    OUString sName(GetName());
+    OUString sRootName(GetName());
+    sal_Int32 index = sName.lastIndexOf("_");
+    if ( index > 0)
+        sRootName = sRootName.copy(0, index);
+
+    sal_uInt32 n = 0;
+    while (rNameSet.find(sName) != rNameSet.end())
+    {
+        sName = sRootName + "_" + OUString::number(n++);
+    }
+    rNameSet.insert(sName);
+
+    SetName(sName);
+}
+
+SdrObject* SdrObjFactory::CreateObjectFromFactory(SdrModel& rSdrModel, SdrInventor nInventor, sal_uInt16 nObjIdentifier)
+{
+    SdrObjCreatorParams aParams { nInventor, nObjIdentifier, rSdrModel };
+    for (const auto & i : ImpGetUserMakeObjHdl()) {
+        SdrObject* pObj = i.Call(aParams);
+        if (pObj) {
+            return pObj;
+        }
+    }
+    return nullptr;
+}
+
+SdrObject* SdrObjFactory::MakeNewObject(
+    SdrModel& rSdrModel,
+    SdrInventor nInventor,
+    sal_uInt16 nIdentifier,
+    const tools::Rectangle* pSnapRect)
+{
+    SdrObject* pObj(nullptr);
+    bool bSetSnapRect(nullptr != pSnapRect);
+
+    if (nInventor == SdrInventor::Default)
+    {
+        switch (nIdentifier)
+        {
+            case OBJ_MEASURE:
+            {
+                if(nullptr != pSnapRect)
+                {
+                    pObj = new SdrMeasureObj(
+                        rSdrModel,
+                        pSnapRect->TopLeft(),
+                        pSnapRect->BottomRight());
+                }
+                else
+                {
+                    pObj = new SdrMeasureObj(rSdrModel);
+                }
+            }
+            break;
+            case OBJ_LINE:
+            {
+                if(nullptr != pSnapRect)
+                {
+                    basegfx::B2DPolygon aPoly;
+
+                    aPoly.append(
+                        basegfx::B2DPoint(
+                            pSnapRect->Left(),
+                            pSnapRect->Top()));
+                    aPoly.append(
+                        basegfx::B2DPoint(
+                            pSnapRect->Right(),
+                            pSnapRect->Bottom()));
+                    pObj = new SdrPathObj(
+                        rSdrModel,
+                        OBJ_LINE,
+                        basegfx::B2DPolyPolygon(aPoly));
+                }
+                else
+                {
+                    pObj = new SdrPathObj(
+                        rSdrModel,
+                        OBJ_LINE);
+                }
+            }
+            break;
+            case OBJ_TEXT:
+            case OBJ_TITLETEXT:
+            case OBJ_OUTLINETEXT:
+            {
+                if(nullptr != pSnapRect)
+                {
+                    pObj = new SdrRectObj(
+                        rSdrModel,
+                        static_cast<SdrObjKind>(nIdentifier),
+                        *pSnapRect);
+                    bSetSnapRect = false;
+                }
+                else
+                {
+                    pObj = new SdrRectObj(
+                        rSdrModel,
+                        static_cast<SdrObjKind>(nIdentifier));
+                }
+            }
+            break;
+            case OBJ_CIRC:
+            case OBJ_SECT:
+            case OBJ_CARC:
+            case OBJ_CCUT:
+            {
+                SdrCircKind eCircKind = ToSdrCircKind(static_cast<SdrObjKind>(nIdentifier));
+                if(nullptr != pSnapRect)
+                {
+                    pObj = new SdrCircObj(rSdrModel, eCircKind, *pSnapRect);
+                    bSetSnapRect = false;
+                }
+                else
+                {
+                    pObj = new SdrCircObj(rSdrModel, eCircKind);
+                }
+            }
+            break;
+            case sal_uInt16(OBJ_NONE       ): pObj=new SdrObject(rSdrModel);                   break;
+            case sal_uInt16(OBJ_GRUP       ): pObj=new SdrObjGroup(rSdrModel);                 break;
+            case sal_uInt16(OBJ_POLY       ): pObj=new SdrPathObj(rSdrModel, OBJ_POLY       ); break;
+            case sal_uInt16(OBJ_PLIN       ): pObj=new SdrPathObj(rSdrModel, OBJ_PLIN       ); break;
+            case sal_uInt16(OBJ_PATHLINE   ): pObj=new SdrPathObj(rSdrModel, OBJ_PATHLINE   ); break;
+            case sal_uInt16(OBJ_PATHFILL   ): pObj=new SdrPathObj(rSdrModel, OBJ_PATHFILL   ); break;
+            case sal_uInt16(OBJ_FREELINE   ): pObj=new SdrPathObj(rSdrModel, OBJ_FREELINE   ); break;
+            case sal_uInt16(OBJ_FREEFILL   ): pObj=new SdrPathObj(rSdrModel, OBJ_FREEFILL   ); break;
+            case sal_uInt16(OBJ_PATHPOLY   ): pObj=new SdrPathObj(rSdrModel, OBJ_POLY       ); break;
+            case sal_uInt16(OBJ_PATHPLIN   ): pObj=new SdrPathObj(rSdrModel, OBJ_PLIN       ); break;
+            case sal_uInt16(OBJ_EDGE       ): pObj=new SdrEdgeObj(rSdrModel);                  break;
+            case sal_uInt16(OBJ_RECT       ): pObj=new SdrRectObj(rSdrModel);                  break;
+            case sal_uInt16(OBJ_GRAF       ): pObj=new SdrGrafObj(rSdrModel);                  break;
+            case sal_uInt16(OBJ_OLE2       ): pObj=new SdrOle2Obj(rSdrModel);                  break;
+            case sal_uInt16(OBJ_FRAME      ): pObj=new SdrOle2Obj(rSdrModel, true);            break;
+            case sal_uInt16(OBJ_CAPTION    ): pObj=new SdrCaptionObj(rSdrModel);               break;
+            case sal_uInt16(OBJ_PAGE       ): pObj=new SdrPageObj(rSdrModel);                  break;
+            case sal_uInt16(OBJ_UNO        ): pObj=new SdrUnoObj(rSdrModel, OUString());       break;
+            case sal_uInt16(OBJ_CUSTOMSHAPE  ): pObj=new SdrObjCustomShape(rSdrModel);       break;
+#if HAVE_FEATURE_AVMEDIA
+            case sal_uInt16(OBJ_MEDIA      ): pObj=new SdrMediaObj(rSdrModel);               break;
+#endif
+            case sal_uInt16(OBJ_TABLE      ): pObj=new sdr::table::SdrTableObj(rSdrModel);   break;
+        }
+    }
+
+    if (!pObj)
+    {
+        pObj = CreateObjectFromFactory(rSdrModel, nInventor, nIdentifier);
+    }
+
+    if (!pObj)
+    {
+        // Well, if no one wants it...
+        return nullptr;
+    }
+
+    if(bSetSnapRect && nullptr != pSnapRect)
+    {
+        pObj->SetSnapRect(*pSnapRect);
+    }
+
+    return pObj;
+}
+
+void SdrObjFactory::InsertMakeObjectHdl(Link<SdrObjCreatorParams, SdrObject*> const & rLink)
+{
+    std::vector<Link<SdrObjCreatorParams, SdrObject*>>& rLL=ImpGetUserMakeObjHdl();
+    auto it = std::find(rLL.begin(), rLL.end(), rLink);
+    if (it != rLL.end()) {
+        OSL_FAIL("SdrObjFactory::InsertMakeObjectHdl(): Link already in place.");
+    } else {
+        rLL.push_back(rLink);
+    }
+}
+
+void SdrObjFactory::RemoveMakeObjectHdl(Link<SdrObjCreatorParams, SdrObject*> const & rLink)
+{
+    std::vector<Link<SdrObjCreatorParams, SdrObject*>>& rLL=ImpGetUserMakeObjHdl();
+    auto it = std::find(rLL.begin(), rLL.end(), rLink);
+    if (it != rLL.end())
+        rLL.erase(it);
+}
+
+namespace svx
+{
+    ISdrObjectFilter::~ISdrObjectFilter()
+    {
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdobjplusdata.cxx b/svx/source/svdraw/svdobjplusdata.cxx
new file mode 100644
index 000000000..c7da1c800
--- /dev/null
+++ b/svx/source/svdraw/svdobjplusdata.cxx
@@ -0,0 +1,61 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+* This file is part of the LibreOffice project.
+*
+* This Source Code Form is subject to the terms of the Mozilla Public
+* License, v. 2.0. If a copy of the MPL was not distributed with this
+* file, You can obtain one at http://mozilla.org/MPL/2.0/.
+*/
+
+#include <svdobjplusdata.hxx>
+#include <svdobjuserdatalist.hxx>
+#include <o3tl/deleter.hxx>
+#include <svx/svdglue.hxx>
+#include <svl/SfxBroadcaster.hxx>
+
+SdrObjPlusData::SdrObjPlusData()
+{
+}
+
+SdrObjPlusData::~SdrObjPlusData()
+{
+    o3tl::reset_preserve_ptr_during(pBroadcast);
+    pUserDataList.reset();
+    pGluePoints.reset();
+}
+
+SdrObjPlusData* SdrObjPlusData::Clone(SdrObject* pObj1) const
+{
+    SdrObjPlusData* pNewPlusData=new SdrObjPlusData;
+    if (pUserDataList!=nullptr) {
+        sal_uInt16 nCount=pUserDataList->GetUserDataCount();
+        if (nCount!=0) {
+            pNewPlusData->pUserDataList.reset(new SdrObjUserDataList);
+            for (sal_uInt16 i=0; i<nCount; i++) {
+                std::unique_ptr<SdrObjUserData> pNewUserData=pUserDataList->GetUserData(i).Clone(pObj1);
+                if (pNewUserData!=nullptr) {
+                    pNewPlusData->pUserDataList->AppendUserData(std::move(pNewUserData));
+                } else {
+                    OSL_FAIL("SdrObjPlusData::Clone(): UserData.Clone() returns NULL.");
+                }
+            }
+        }
+    }
+    if (pGluePoints!=nullptr) pNewPlusData->pGluePoints.reset(new SdrGluePointList(*pGluePoints));
+    // MtfAnimator isn't copied either
+
+    // #i68101#
+    // copy object name, title and description
+    pNewPlusData->aObjName = aObjName;
+    pNewPlusData->aObjTitle = aObjTitle;
+    pNewPlusData->aObjDescription = aObjDescription;
+
+    return pNewPlusData;
+}
+
+void SdrObjPlusData::SetGluePoints(const SdrGluePointList& rPts)
+{
+    *pGluePoints = rPts;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdobjuserdatalist.cxx b/svx/source/svdraw/svdobjuserdatalist.cxx
new file mode 100644
index 000000000..cae5e8db6
--- /dev/null
+++ b/svx/source/svdraw/svdobjuserdatalist.cxx
@@ -0,0 +1,36 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+* This file is part of the LibreOffice project.
+*
+* This Source Code Form is subject to the terms of the Mozilla Public
+* License, v. 2.0. If a copy of the MPL was not distributed with this
+* file, You can obtain one at http://mozilla.org/MPL/2.0/.
+*/
+
+#include <memory>
+#include <svdobjuserdatalist.hxx>
+
+SdrObjUserDataList::SdrObjUserDataList() {}
+SdrObjUserDataList::~SdrObjUserDataList() {}
+
+size_t SdrObjUserDataList::GetUserDataCount() const
+{
+    return maList.size();
+}
+
+SdrObjUserData& SdrObjUserDataList::GetUserData(size_t nNum)
+{
+    return *maList.at(nNum);
+}
+
+void SdrObjUserDataList::AppendUserData(std::unique_ptr<SdrObjUserData> pData)
+{
+    maList.push_back(std::move(pData));
+}
+
+void SdrObjUserDataList::DeleteUserData(size_t nNum)
+{
+    maList.erase(maList.begin()+nNum);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdocapt.cxx b/svx/source/svdraw/svdocapt.cxx
new file mode 100644
index 000000000..b6c3168f6
--- /dev/null
+++ b/svx/source/svdraw/svdocapt.cxx
@@ -0,0 +1,768 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <cassert>
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <basegfx/tuple/b2dtuple.hxx>
+#include <tools/bigint.hxx>
+#include <tools/helpers.hxx>
+#include <rtl/ustrbuf.hxx>
+
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+
+#include <sdr/contact/viewcontactofsdrcaptionobj.hxx>
+#include <sdr/properties/captionproperties.hxx>
+#include <svx/sdrhittesthelper.hxx>
+#include <svx/sdooitm.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdocapt.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdview.hxx>
+#include <svx/sxcecitm.hxx>
+#include <svx/sxcgitm.hxx>
+#include <svx/sxcllitm.hxx>
+#include <svx/sxctitm.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/ptrstyle.hxx>
+
+namespace {
+
+enum EscDir {LKS,RTS,OBN,UNT};
+
+}
+
+class ImpCaptParams
+{
+public:
+    SdrCaptionType              eType;
+    long                        nGap;
+    long                        nEscRel;
+    long                        nEscAbs;
+    long                        nLineLen;
+    SdrCaptionEscDir            eEscDir;
+    bool                        bFitLineLen;
+    bool                        bEscRel;
+    bool                        bFixedAngle;
+
+public:
+    ImpCaptParams()
+      : eType(SdrCaptionType::Type3),
+        nGap(0), nEscRel(5000), nEscAbs(0),
+        nLineLen(0), eEscDir(SdrCaptionEscDir::Horizontal),
+        bFitLineLen(true), bEscRel(true), bFixedAngle(false)
+    {
+    }
+    void CalcEscPos(const Point& rTail, const tools::Rectangle& rRect, Point& rPt, EscDir& rDir) const;
+};
+
+void ImpCaptParams::CalcEscPos(const Point& rTailPt, const tools::Rectangle& rRect, Point& rPt, EscDir& rDir) const
+{
+    Point aTl(rTailPt); // copy locally for performance reasons
+    long nX,nY;
+    if (bEscRel) {
+        nX=rRect.Right()-rRect.Left();
+        nX=BigMulDiv(nX,nEscRel,10000);
+        nY=rRect.Bottom()-rRect.Top();
+        nY=BigMulDiv(nY,nEscRel,10000);
+    } else {
+        nX=nEscAbs;
+        nY=nEscAbs;
+    }
+    nX+=rRect.Left();
+    nY+=rRect.Top();
+    Point  aBestPt;
+    EscDir eBestDir=LKS;
+    bool bTryH=eEscDir==SdrCaptionEscDir::BestFit;
+    if (!bTryH) {
+        if (eType!=SdrCaptionType::Type1) {
+            bTryH=eEscDir==SdrCaptionEscDir::Horizontal;
+        } else {
+            bTryH=eEscDir==SdrCaptionEscDir::Vertical;
+        }
+    }
+    bool bTryV=eEscDir==SdrCaptionEscDir::BestFit;
+    if (!bTryV) {
+        if (eType!=SdrCaptionType::Type1) {
+            bTryV=eEscDir==SdrCaptionEscDir::Vertical;
+        } else {
+            bTryV=eEscDir==SdrCaptionEscDir::Horizontal;
+        }
+    }
+
+    if (bTryH) {
+        Point aLft(rRect.Left()-nGap,nY);
+        Point aRgt(rRect.Right()+nGap,nY);
+        bool bLft=(aTl.X()-aLft.X()<aRgt.X()-aTl.X());
+        if (bLft) {
+            eBestDir=LKS;
+            aBestPt=aLft;
+        } else {
+            eBestDir=RTS;
+            aBestPt=aRgt;
+        }
+    }
+    if (bTryV) {
+        Point aTop(nX,rRect.Top()-nGap);
+        Point aBtm(nX,rRect.Bottom()+nGap);
+        bool bTop=(aTl.Y()-aTop.Y()<aBtm.Y()-aTl.Y());
+        Point aBest2;
+        EscDir eBest2;
+        if (bTop) {
+            eBest2=OBN;
+            aBest2=aTop;
+        } else {
+            eBest2=UNT;
+            aBest2=aBtm;
+        }
+        bool bTakeIt=eEscDir!=SdrCaptionEscDir::BestFit;
+        if (!bTakeIt) {
+            BigInt aHorX(aBestPt.X()-aTl.X()); aHorX*=aHorX;
+            BigInt aHorY(aBestPt.Y()-aTl.Y()); aHorY*=aHorY;
+            BigInt aVerX(aBest2.X()-aTl.X());  aVerX*=aVerX;
+            BigInt aVerY(aBest2.Y()-aTl.Y());  aVerY*=aVerY;
+            if (eType!=SdrCaptionType::Type1) {
+                bTakeIt=aVerX+aVerY<aHorX+aHorY;
+            } else {
+                bTakeIt=aVerX+aVerY>=aHorX+aHorY;
+            }
+        }
+        if (bTakeIt) {
+            aBestPt=aBest2;
+            eBestDir=eBest2;
+        }
+    }
+    rPt=aBestPt;
+    rDir=eBestDir;
+}
+
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrCaptionObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::CaptionProperties>(*this);
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrCaptionObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrCaptionObj>(*this);
+}
+
+
+SdrCaptionObj::SdrCaptionObj(SdrModel& rSdrModel)
+:   SdrRectObj(rSdrModel, OBJ_TEXT),
+    aTailPoly(3),  // default size: 3 points = 2 lines
+    mbSpecialTextBoxShadow(false),
+    mbFixedTail(false),
+    mbSuppressGetBitmap(false),
+    maFixedTailPos()
+{
+}
+
+SdrCaptionObj::SdrCaptionObj(
+    SdrModel& rSdrModel,
+    const tools::Rectangle& rRect,
+    const Point& rTail)
+:   SdrRectObj(rSdrModel, OBJ_TEXT,rRect),
+    aTailPoly(3),  // default size: 3 points = 2 lines
+    mbSpecialTextBoxShadow(false),
+    mbFixedTail(false),
+    mbSuppressGetBitmap(false),
+    maFixedTailPos()
+{
+    aTailPoly[0]=maFixedTailPos=rTail;
+}
+
+SdrCaptionObj::~SdrCaptionObj()
+{
+}
+
+void SdrCaptionObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bRotateFreeAllowed=false;
+    rInfo.bRotate90Allowed  =false;
+    rInfo.bMirrorFreeAllowed=false;
+    rInfo.bMirror45Allowed  =false;
+    rInfo.bMirror90Allowed  =false;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed     =false;
+    rInfo.bEdgeRadiusAllowed=false;
+    rInfo.bCanConvToPath    =true;
+    rInfo.bCanConvToPoly    =true;
+    rInfo.bCanConvToPathLineToArea=false;
+    rInfo.bCanConvToPolyLineToArea=false;
+    rInfo.bCanConvToContour = (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary());
+}
+
+sal_uInt16 SdrCaptionObj::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_CAPTION);
+}
+
+SdrCaptionObj* SdrCaptionObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrCaptionObj >(rTargetModel);
+}
+
+SdrCaptionObj& SdrCaptionObj::operator=(const SdrCaptionObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrRectObj::operator=(rObj);
+
+    aTailPoly = rObj.aTailPoly;
+    mbSpecialTextBoxShadow = rObj.mbSpecialTextBoxShadow;
+    mbFixedTail = rObj.mbFixedTail;
+    maFixedTailPos = rObj.maFixedTailPos;
+
+    return *this;
+}
+
+OUString SdrCaptionObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulCAPTION));
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrCaptionObj::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralCAPTION);
+}
+
+basegfx::B2DPolyPolygon SdrCaptionObj::TakeXorPoly() const
+{
+    basegfx::B2DPolyPolygon aPolyPoly(SdrRectObj::TakeXorPoly());
+    aPolyPoly.append(aTailPoly.getB2DPolygon());
+
+    return aPolyPoly;
+}
+
+sal_uInt32 SdrCaptionObj::GetHdlCount() const
+{
+    sal_uInt32 nCount1(SdrRectObj::GetHdlCount());
+    // Currently only dragging the tail's end is implemented.
+    return nCount1 + 1;
+}
+
+void SdrCaptionObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    SdrRectObj::AddToHdlList(rHdlList);
+    // Currently only dragging the tail's end is implemented.
+    std::unique_ptr<SdrHdl> pHdl(new SdrHdl(aTailPoly.GetPoint(0), SdrHdlKind::Poly));
+    pHdl->SetPolyNum(1);
+    pHdl->SetPointNum(0);
+    rHdlList.AddHdl(std::move(pHdl));
+}
+
+bool SdrCaptionObj::hasSpecialDrag() const
+{
+    return true;
+}
+
+bool SdrCaptionObj::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    const SdrHdl* pHdl = rDrag.GetHdl();
+    rDrag.SetEndDragChangesAttributes(true);
+    rDrag.SetEndDragChangesGeoAndAttributes(true);
+
+    if(pHdl && 0 == pHdl->GetPolyNum())
+    {
+        return SdrRectObj::beginSpecialDrag(rDrag);
+    }
+    else
+    {
+        rDrag.SetOrtho8Possible();
+
+        if(!pHdl)
+        {
+            if (bMovProt)
+                return false;
+
+            rDrag.SetNoSnap();
+            rDrag.SetActionRect(maRect);
+
+            Point aHit(rDrag.GetStart());
+
+            if(rDrag.GetPageView() && SdrObjectPrimitiveHit(*this, aHit, 0, *rDrag.GetPageView(), nullptr, false))
+            {
+                return true;
+            }
+        }
+        else
+        {
+            if((1 == pHdl->GetPolyNum()) && (0 == pHdl->GetPointNum()))
+                return true;
+        }
+    }
+
+    return false;
+}
+
+bool SdrCaptionObj::applySpecialDrag(SdrDragStat& rDrag)
+{
+    const SdrHdl* pHdl = rDrag.GetHdl();
+
+    if(pHdl && 0 == pHdl->GetPolyNum())
+    {
+        const bool bRet(SdrRectObj::applySpecialDrag(rDrag));
+        ImpRecalcTail();
+        ActionChanged();
+
+        return bRet;
+    }
+    else
+    {
+        Point aDelt(rDrag.GetNow()-rDrag.GetStart());
+
+        if(!pHdl)
+        {
+            maRect.Move(aDelt.X(),aDelt.Y());
+        }
+        else
+        {
+            aTailPoly[0] += aDelt;
+        }
+
+        ImpRecalcTail();
+        ActionChanged();
+
+        return true;
+    }
+}
+
+OUString SdrCaptionObj::getSpecialDragComment(const SdrDragStat& rDrag) const
+{
+    const bool bCreateComment(rDrag.GetView() && this == rDrag.GetView()->GetCreateObj());
+
+    if(bCreateComment)
+    {
+        return OUString();
+    }
+    else
+    {
+        const SdrHdl* pHdl = rDrag.GetHdl();
+
+        if(pHdl && 0 == pHdl->GetPolyNum())
+        {
+            return SdrRectObj::getSpecialDragComment(rDrag);
+        }
+        else
+        {
+            if(!pHdl)
+            {
+                return ImpGetDescriptionStr(STR_DragCaptFram);
+            }
+            else
+            {
+                return ImpGetDescriptionStr(STR_DragCaptTail);
+            }
+        }
+    }
+}
+
+
+void SdrCaptionObj::ImpGetCaptParams(ImpCaptParams& rPara) const
+{
+    const SfxItemSet& rSet = GetObjectItemSet();
+    rPara.eType      =rSet.Get(SDRATTR_CAPTIONTYPE      ).GetValue();
+    rPara.bFixedAngle=rSet.Get(SDRATTR_CAPTIONFIXEDANGLE).GetValue();
+    rPara.nGap       =static_cast<const SdrCaptionGapItem&>       (rSet.Get(SDRATTR_CAPTIONGAP       )).GetValue();
+    rPara.eEscDir    =rSet.Get(SDRATTR_CAPTIONESCDIR    ).GetValue();
+    rPara.bEscRel    =rSet.Get(SDRATTR_CAPTIONESCISREL  ).GetValue();
+    rPara.nEscRel    =rSet.Get(SDRATTR_CAPTIONESCREL    ).GetValue();
+    rPara.nEscAbs    =rSet.Get(SDRATTR_CAPTIONESCABS    ).GetValue();
+    rPara.nLineLen   =rSet.Get(SDRATTR_CAPTIONLINELEN   ).GetValue();
+    rPara.bFitLineLen=rSet.Get(SDRATTR_CAPTIONFITLINELEN).GetValue();
+}
+
+void SdrCaptionObj::ImpRecalcTail()
+{
+    ImpCaptParams aPara;
+    ImpGetCaptParams(aPara);
+    ImpCalcTail(aPara, aTailPoly, maRect);
+    SetRectsDirty();
+    SetXPolyDirty();
+}
+
+// #i35971#
+// SdrCaptionObj::ImpCalcTail1 does move the object(!). What a hack.
+// I really wonder why this had not triggered problems before. I am
+// sure there are some places where SetTailPos() is called at least
+// twice or SetSnapRect after it again just to work around this.
+// Changed this method to not do that.
+// Also found why this has been done: For interactive dragging of the
+// tail end pos for SdrCaptionType::Type1. This sure was the simplest method
+// to achieve this, at the cost of making a whole group of const methods
+// of this object implicitly change the object's position.
+void SdrCaptionObj::ImpCalcTail1(const ImpCaptParams& rPara, tools::Polygon& rPoly, tools::Rectangle const & rRect)
+{
+    tools::Polygon aPol(2);
+    Point aTl(rPoly[0]);
+
+    aPol[0] = aTl;
+    aPol[1] = aTl;
+
+    EscDir eEscDir;
+    Point aEscPos;
+
+    rPara.CalcEscPos(aTl, rRect, aEscPos, eEscDir);
+    aPol[1] = aEscPos;
+
+    if(eEscDir==LKS || eEscDir==RTS)
+    {
+        aPol[0].setX( aEscPos.X() );
+    }
+    else
+    {
+        aPol[0].setY( aEscPos.Y() );
+    }
+
+    rPoly = aPol;
+}
+
+void SdrCaptionObj::ImpCalcTail2(const ImpCaptParams& rPara, tools::Polygon& rPoly, tools::Rectangle const & rRect)
+{ // Gap/EscDir/EscPos/Angle
+    tools::Polygon aPol(2);
+    Point aTl(rPoly[0]);
+    aPol[0]=aTl;
+
+    EscDir eEscDir;
+    Point aEscPos;
+    rPara.CalcEscPos(aTl,rRect,aEscPos,eEscDir);
+    aPol[1]=aEscPos;
+
+    if (!rPara.bFixedAngle) {
+        // TODO: Implementation missing.
+    }
+    rPoly=aPol;
+}
+
+void SdrCaptionObj::ImpCalcTail3(const ImpCaptParams& rPara, tools::Polygon& rPoly, tools::Rectangle const & rRect)
+{ // Gap/EscDir/EscPos/Angle/LineLen
+    tools::Polygon aPol(3);
+    Point aTl(rPoly[0]);
+    aPol[0]=aTl;
+
+    EscDir eEscDir;
+    Point aEscPos;
+    rPara.CalcEscPos(aTl,rRect,aEscPos,eEscDir);
+    aPol[1]=aEscPos;
+    aPol[2]=aEscPos;
+
+    if (eEscDir==LKS || eEscDir==RTS) {
+        if (rPara.bFitLineLen) {
+            aPol[1].setX((aTl.X()+aEscPos.X())/2 );
+        } else {
+            if (eEscDir==LKS) aPol[1].AdjustX( -(rPara.nLineLen) );
+            else aPol[1].AdjustX(rPara.nLineLen );
+        }
+    } else {
+        if (rPara.bFitLineLen) {
+            aPol[1].setY((aTl.Y()+aEscPos.Y())/2 );
+        } else {
+            if (eEscDir==OBN) aPol[1].AdjustY( -(rPara.nLineLen) );
+            else aPol[1].AdjustY(rPara.nLineLen );
+        }
+    }
+    if (!rPara.bFixedAngle) {
+        // TODO: Implementation missing.
+    }
+    rPoly=aPol;
+}
+
+void SdrCaptionObj::ImpCalcTail(const ImpCaptParams& rPara, tools::Polygon& rPoly, tools::Rectangle const & rRect)
+{
+    switch (rPara.eType) {
+        case SdrCaptionType::Type1: ImpCalcTail1(rPara,rPoly,rRect); break;
+        case SdrCaptionType::Type2: ImpCalcTail2(rPara,rPoly,rRect); break;
+        case SdrCaptionType::Type3: ImpCalcTail3(rPara,rPoly,rRect); break;
+        case SdrCaptionType::Type4: ImpCalcTail3(rPara,rPoly,rRect); break;
+    }
+}
+
+bool SdrCaptionObj::BegCreate(SdrDragStat& rStat)
+{
+    if (maRect.IsEmpty()) return false; // Create currently only works with the given Rect
+
+    ImpCaptParams aPara;
+    ImpGetCaptParams(aPara);
+    maRect.SetPos(rStat.GetNow());
+    aTailPoly[0]=rStat.GetStart();
+    ImpCalcTail(aPara,aTailPoly,maRect);
+    rStat.SetActionRect(maRect);
+    return true;
+}
+
+bool SdrCaptionObj::MovCreate(SdrDragStat& rStat)
+{
+    ImpCaptParams aPara;
+    ImpGetCaptParams(aPara);
+    maRect.SetPos(rStat.GetNow());
+    ImpCalcTail(aPara,aTailPoly,maRect);
+    rStat.SetActionRect(maRect);
+    SetBoundRectDirty();
+    bSnapRectDirty=true;
+    return true;
+}
+
+bool SdrCaptionObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    ImpCaptParams aPara;
+    ImpGetCaptParams(aPara);
+    maRect.SetPos(rStat.GetNow());
+    ImpCalcTail(aPara,aTailPoly,maRect);
+    SetRectsDirty();
+    return (eCmd==SdrCreateCmd::ForceEnd || rStat.GetPointCount()>=2);
+}
+
+bool SdrCaptionObj::BckCreate(SdrDragStat& /*rStat*/)
+{
+    return false;
+}
+
+void SdrCaptionObj::BrkCreate(SdrDragStat& /*rStat*/)
+{
+}
+
+basegfx::B2DPolyPolygon SdrCaptionObj::TakeCreatePoly(const SdrDragStat& /*rDrag*/) const
+{
+    basegfx::B2DPolyPolygon aRetval;
+    const basegfx::B2DRange aRange =vcl::unotools::b2DRectangleFromRectangle(maRect);
+    aRetval.append(basegfx::utils::createPolygonFromRect(aRange));
+    aRetval.append(aTailPoly.getB2DPolygon());
+    return aRetval;
+}
+
+PointerStyle SdrCaptionObj::GetCreatePointer() const
+{
+    return PointerStyle::DrawCaption;
+}
+
+void SdrCaptionObj::NbcMove(const Size& rSiz)
+{
+    SdrRectObj::NbcMove(rSiz);
+    MovePoly(aTailPoly,rSiz);
+    if(mbFixedTail)
+        SetTailPos(GetFixedTailPos());
+}
+
+void SdrCaptionObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    SdrRectObj::NbcResize(rRef,xFact,yFact);
+    ResizePoly(aTailPoly,rRef,xFact,yFact);
+    ImpRecalcTail();
+    if(mbFixedTail)
+        SetTailPos(GetFixedTailPos());
+}
+
+void SdrCaptionObj::NbcSetRelativePos(const Point& rPnt)
+{
+    Point aRelPos0(aTailPoly.GetPoint(0)-aAnchor);
+    Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y());
+    NbcMove(aSiz); // This also calls SetRectsDirty()
+}
+
+Point SdrCaptionObj::GetRelativePos() const
+{
+    return aTailPoly.GetPoint(0)-aAnchor;
+}
+
+const tools::Rectangle& SdrCaptionObj::GetLogicRect() const
+{
+    return maRect;
+}
+
+void SdrCaptionObj::NbcSetLogicRect(const tools::Rectangle& rRect)
+{
+    SdrRectObj::NbcSetLogicRect(rRect);
+    ImpRecalcTail();
+}
+
+const Point& SdrCaptionObj::GetTailPos() const
+{
+    return aTailPoly[0];
+}
+
+void SdrCaptionObj::SetTailPos(const Point& rPos)
+{
+    if (aTailPoly.GetSize()==0 || aTailPoly[0]!=rPos) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcSetTailPos(rPos);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrCaptionObj::NbcSetTailPos(const Point& rPos)
+{
+    aTailPoly[0]=rPos;
+    ImpRecalcTail();
+}
+
+sal_uInt32 SdrCaptionObj::GetSnapPointCount() const
+{
+    // TODO: Implementation missing.
+    return 0;
+}
+
+Point SdrCaptionObj::GetSnapPoint(sal_uInt32 /*i*/) const
+{
+    // TODO: Implementation missing.
+    return Point(0,0);
+}
+
+void SdrCaptionObj::Notify(SfxBroadcaster& rBC, const SfxHint& rHint)
+{
+    SdrRectObj::Notify(rBC,rHint);
+    ImpRecalcTail();
+}
+
+SdrObjGeoData* SdrCaptionObj::NewGeoData() const
+{
+    return new SdrCaptObjGeoData;
+}
+
+void SdrCaptionObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrRectObj::SaveGeoData(rGeo);
+    SdrCaptObjGeoData& rCGeo=static_cast<SdrCaptObjGeoData&>(rGeo);
+    rCGeo.aTailPoly=aTailPoly;
+}
+
+void SdrCaptionObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrRectObj::RestGeoData(rGeo);
+    const SdrCaptObjGeoData& rCGeo=static_cast<const SdrCaptObjGeoData&>(rGeo);
+    aTailPoly=rCGeo.aTailPoly;
+}
+
+SdrObjectUniquePtr SdrCaptionObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    SdrObjectUniquePtr pRect = SdrRectObj::DoConvertToPolyObj(bBezier, bAddText);
+    SdrObjectUniquePtr pTail = ImpConvertMakeObj(basegfx::B2DPolyPolygon(aTailPoly.getB2DPolygon()), false, bBezier);
+    SdrObjectUniquePtr pRet;
+    if (pTail && !pRect)
+        pRet = std::move(pTail);
+    else if (pRect && !pTail)
+        pRet = std::move(pRect);
+    else if (pTail && pRect)
+    {
+        if (pTail->GetSubList())
+        {
+            pTail->GetSubList()->NbcInsertObject(pRect.release());
+            pRet = std::move(pTail);
+        }
+        else if (pRect->GetSubList())
+        {
+            pRect->GetSubList()->NbcInsertObject(pTail.release(),0);
+            pRet = std::move(pRect);
+        }
+        else
+        {
+            SdrObjGroup* pGrp = new SdrObjGroup(getSdrModelFromSdrObject());
+            pGrp->GetSubList()->NbcInsertObject(pRect.release());
+            pGrp->GetSubList()->NbcInsertObject(pTail.release(),0);
+            pRet.reset(pGrp);
+        }
+    }
+    return pRet;
+}
+
+namespace {
+
+void handleNegativeScale(basegfx::B2DTuple & scale, double * rotate) {
+    assert(rotate != nullptr);
+
+    // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings
+    // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly
+    if(basegfx::fTools::less(scale.getX(), 0.0) && basegfx::fTools::less(scale.getY(), 0.0))
+    {
+        scale.setX(fabs(scale.getX()));
+        scale.setY(fabs(scale.getY()));
+        *rotate = fmod(*rotate + F_PI, F_2PI);
+    }
+}
+
+}
+
+// #i32599#
+// Add own implementation for TRSetBaseGeometry to handle TailPos over changes.
+void SdrCaptionObj::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/)
+{
+    // break up matrix
+    basegfx::B2DTuple aScale;
+    basegfx::B2DTuple aTranslate;
+    double fRotate, fShearX;
+    rMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+
+    handleNegativeScale(aScale, &fRotate);
+
+    // if anchor is used, make position relative to it
+    if(getSdrModelFromSdrObject().IsWriter())
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build BaseRect
+    Point aPoint(FRound(aTranslate.getX()), FRound(aTranslate.getY()));
+    tools::Rectangle aBaseRect(aPoint, Size(FRound(aScale.getX()), FRound(aScale.getY())));
+
+    // set BaseRect, but rescue TailPos over this call
+    const Point aTailPoint = GetTailPos();
+    SetSnapRect(aBaseRect);
+    SetTailPos(aTailPoint);
+    ImpRecalcTail();
+}
+
+// geometry access
+basegfx::B2DPolygon SdrCaptionObj::getTailPolygon() const
+{
+    return aTailPoly.getB2DPolygon();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdocirc.cxx b/svx/source/svdraw/svdocirc.cxx
new file mode 100644
index 000000000..93978f1ef
--- /dev/null
+++ b/svx/source/svdraw/svdocirc.cxx
@@ -0,0 +1,1159 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <basegfx/point/b2dpoint.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <math.h>
+#include <rtl/ustrbuf.hxx>
+
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+
+#include <sdr/contact/viewcontactofsdrcircobj.hxx>
+#include <sdr/properties/circleproperties.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdocirc.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdview.hxx>
+#include <svx/sxciaitm.hxx>
+#include <sxcikitm.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlnedit.hxx>
+#include <svx/xlnedwit.hxx>
+#include <svx/xlnstit.hxx>
+#include <svx/xlnstwit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/ptrstyle.hxx>
+
+using namespace com::sun::star;
+
+static Point GetAnglePnt(const tools::Rectangle& rR, long nAngle)
+{
+    Point aCenter(rR.Center());
+    long nWdt=rR.Right()-rR.Left();
+    long nHgt=rR.Bottom()-rR.Top();
+    long nMaxRad=(std::max(nWdt,nHgt)+1) /2;
+    double a;
+    a = nAngle * F_PI18000;
+    Point aRetval(FRound(cos(a)*nMaxRad),-FRound(sin(a)*nMaxRad));
+    if (nWdt==0) aRetval.setX(0 );
+    if (nHgt==0) aRetval.setY(0 );
+    if (nWdt!=nHgt) {
+        if (nWdt>nHgt) {
+            if (nWdt!=0) {
+                // stop possible overruns for very large objects
+                if (std::abs(nHgt)>32767 || std::abs(aRetval.Y())>32767) {
+                    aRetval.setY(BigMulDiv(aRetval.Y(),nHgt,nWdt) );
+                } else {
+                    aRetval.setY(aRetval.Y()*nHgt/nWdt );
+                }
+            }
+        } else {
+            if (nHgt!=0) {
+                // stop possible overruns for very large objects
+                if (std::abs(nWdt)>32767 || std::abs(aRetval.X())>32767) {
+                    aRetval.setX(BigMulDiv(aRetval.X(),nWdt,nHgt) );
+                } else {
+                    aRetval.setX(aRetval.X()*nWdt/nHgt );
+                }
+            }
+        }
+    }
+    aRetval+=aCenter;
+    return aRetval;
+}
+
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrCircObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::CircleProperties>(*this);
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrCircObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrCircObj>(*this);
+}
+
+SdrCircKind ToSdrCircKind(SdrObjKind eKind)
+{
+    switch (eKind)
+    {
+        case OBJ_CIRC: return SdrCircKind::Full;
+        case OBJ_SECT: return SdrCircKind::Section;
+        case OBJ_CARC: return SdrCircKind::Arc;
+        case OBJ_CCUT: return SdrCircKind::Cut;
+        default: assert(false);
+    }
+    return SdrCircKind::Full;
+}
+
+SdrCircObj::SdrCircObj(
+    SdrModel& rSdrModel,
+    SdrCircKind eNewKind)
+:   SdrRectObj(rSdrModel)
+{
+    nStartAngle=0;
+    nEndAngle=36000;
+    meCircleKind=eNewKind;
+    bClosedObj=eNewKind!=SdrCircKind::Arc;
+}
+
+SdrCircObj::SdrCircObj(
+    SdrModel& rSdrModel,
+    SdrCircKind eNewKind,
+    const tools::Rectangle& rRect)
+:   SdrRectObj(rSdrModel, rRect)
+{
+    nStartAngle=0;
+    nEndAngle=36000;
+    meCircleKind=eNewKind;
+    bClosedObj=eNewKind!=SdrCircKind::Arc;
+}
+
+SdrCircObj::SdrCircObj(
+    SdrModel& rSdrModel,
+    SdrCircKind eNewKind,
+    const tools::Rectangle& rRect,
+    long nNewStartWink,
+    long nNewEndWink)
+:   SdrRectObj(rSdrModel, rRect)
+{
+    long nAngleDif=nNewEndWink-nNewStartWink;
+    nStartAngle=NormAngle36000(nNewStartWink);
+    nEndAngle=NormAngle36000(nNewEndWink);
+    if (nAngleDif==36000) nEndAngle+=nAngleDif; // full circle
+    meCircleKind=eNewKind;
+    bClosedObj=eNewKind!=SdrCircKind::Arc;
+}
+
+SdrCircObj::~SdrCircObj()
+{
+}
+
+void SdrCircObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    bool bCanConv=!HasText() || ImpCanConvTextToCurve();
+    rInfo.bEdgeRadiusAllowed    = false;
+    rInfo.bCanConvToPath=bCanConv;
+    rInfo.bCanConvToPoly=bCanConv;
+    rInfo.bCanConvToContour = !IsFontwork() && (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary());
+}
+
+sal_uInt16 SdrCircObj::GetObjIdentifier() const
+{
+    switch (meCircleKind)
+    {
+    case SdrCircKind::Full: return OBJ_CIRC;
+    case SdrCircKind::Section: return OBJ_SECT;
+    case SdrCircKind::Cut: return OBJ_CCUT;
+    case SdrCircKind::Arc: return OBJ_CARC;
+    default: assert(false);
+    }
+    return OBJ_CIRC;
+}
+
+bool SdrCircObj::PaintNeedsXPolyCirc() const
+{
+    // XPoly is necessary for all rotated ellipse objects, circle and
+    // ellipse segments.
+    // If not WIN, then (for now) also for circle/ellipse segments and circle/
+    // ellipse arcs (for precision)
+    bool bNeed=aGeo.nRotationAngle!=0 || aGeo.nShearAngle!=0 || meCircleKind==SdrCircKind::Cut;
+    // If not WIN, then for everything except full circle (for now!)
+    if (meCircleKind!=SdrCircKind::Full) bNeed = true;
+
+    const SfxItemSet& rSet = GetObjectItemSet();
+    if(!bNeed)
+    {
+        // XPoly is necessary for everything that isn't LineSolid or LineNone
+        drawing::LineStyle eLine = rSet.Get(XATTR_LINESTYLE).GetValue();
+        bNeed = eLine != drawing::LineStyle_NONE && eLine != drawing::LineStyle_SOLID;
+
+        // XPoly is necessary for thick lines
+        if(!bNeed && eLine != drawing::LineStyle_NONE)
+            bNeed = rSet.Get(XATTR_LINEWIDTH).GetValue() != 0;
+
+        // XPoly is necessary for circle arcs with line ends
+        if(!bNeed && meCircleKind == SdrCircKind::Arc)
+        {
+            // start of the line is here if StartPolygon, StartWidth!=0
+            bNeed=rSet.Get(XATTR_LINESTART).GetLineStartValue().count() != 0 &&
+                  rSet.Get(XATTR_LINESTARTWIDTH).GetValue() != 0;
+
+            if(!bNeed)
+            {
+                // end of the line is here if EndPolygon, EndWidth!=0
+                bNeed = rSet.Get(XATTR_LINEEND).GetLineEndValue().count() != 0 &&
+                        rSet.Get(XATTR_LINEENDWIDTH).GetValue() != 0;
+            }
+        }
+    }
+
+    // XPoly is necessary if Fill !=None and !=Solid
+    if(!bNeed && meCircleKind != SdrCircKind::Arc)
+    {
+        drawing::FillStyle eFill=rSet.Get(XATTR_FILLSTYLE).GetValue();
+        bNeed = eFill != drawing::FillStyle_NONE && eFill != drawing::FillStyle_SOLID;
+    }
+
+    if(!bNeed && meCircleKind != SdrCircKind::Full && nStartAngle == nEndAngle)
+        bNeed = true; // otherwise we're drawing a full circle
+
+    return bNeed;
+}
+
+basegfx::B2DPolygon SdrCircObj::ImpCalcXPolyCirc(const SdrCircKind eCicrleKind, const tools::Rectangle& rRect1, long nStart, long nEnd) const
+{
+    const basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(rRect1);
+    basegfx::B2DPolygon aCircPolygon;
+
+    if(SdrCircKind::Full == eCicrleKind)
+    {
+        // create full circle. Do not use createPolygonFromEllipse; it's necessary
+        // to get the start point to the bottom of the circle to keep compatible to
+        // old geometry creation
+        aCircPolygon = basegfx::utils::createPolygonFromUnitCircle(1);
+
+        // needs own scaling and translation from unit circle to target size (same as
+        // would be in createPolygonFromEllipse)
+        const basegfx::B2DPoint aCenter(aRange.getCenter());
+        const basegfx::B2DHomMatrix aMatrix(basegfx::utils::createScaleTranslateB2DHomMatrix(
+            aRange.getWidth() / 2.0, aRange.getHeight() / 2.0,
+            aCenter.getX(), aCenter.getY()));
+        aCircPolygon.transform(aMatrix);
+    }
+    else
+    {
+        // mirror start, end for geometry creation since model coordinate system is mirrored in Y
+        // #i111715# increase numerical correctness by first dividing and not using F_PI1800
+        const double fStart((((36000 - nEnd) % 36000) / 18000.0) * F_PI);
+        const double fEnd((((36000 - nStart) % 36000) / 18000.0) * F_PI);
+
+        // create circle segment. This is not closed by default
+        aCircPolygon = basegfx::utils::createPolygonFromEllipseSegment(
+            aRange.getCenter(), aRange.getWidth() / 2.0, aRange.getHeight() / 2.0,
+            fStart, fEnd);
+
+        // check closing states
+        const bool bCloseSegment(SdrCircKind::Arc != eCicrleKind);
+        const bool bCloseUsingCenter(SdrCircKind::Section == eCicrleKind);
+
+        if(bCloseSegment)
+        {
+            if(bCloseUsingCenter)
+            {
+                // add center point at start (for historical reasons)
+                basegfx::B2DPolygon aSector;
+                aSector.append(aRange.getCenter());
+                aSector.append(aCircPolygon);
+                aCircPolygon = aSector;
+            }
+
+            // close
+            aCircPolygon.setClosed(true);
+        }
+    }
+
+    // #i76950#
+    if(aGeo.nShearAngle || aGeo.nRotationAngle)
+    {
+        // translate top left to (0,0)
+        const basegfx::B2DPoint aTopLeft(aRange.getMinimum());
+        basegfx::B2DHomMatrix aMatrix(basegfx::utils::createTranslateB2DHomMatrix(
+            -aTopLeft.getX(), -aTopLeft.getY()));
+
+        // shear, rotate and back to top left (if needed)
+        aMatrix = basegfx::utils::createShearXRotateTranslateB2DHomMatrix(
+            aGeo.nShearAngle ? tan((36000 - aGeo.nShearAngle) * F_PI18000) : 0.0,
+            aGeo.nRotationAngle ? (36000 - aGeo.nRotationAngle) * F_PI18000 : 0.0,
+            aTopLeft) * aMatrix;
+
+        // apply transformation
+        aCircPolygon.transform(aMatrix);
+    }
+
+    return aCircPolygon;
+}
+
+void SdrCircObj::RecalcXPoly()
+{
+    const basegfx::B2DPolygon aPolyCirc(ImpCalcXPolyCirc(meCircleKind, maRect, nStartAngle, nEndAngle));
+    mpXPoly.reset( new XPolygon(aPolyCirc) );
+}
+
+OUString SdrCircObj::TakeObjNameSingul() const
+{
+    const char* pID=STR_ObjNameSingulCIRC;
+    if (maRect.GetWidth() == maRect.GetHeight() && aGeo.nShearAngle==0)
+    {
+        switch (meCircleKind) {
+            case SdrCircKind::Full: pID=STR_ObjNameSingulCIRC; break;
+            case SdrCircKind::Section: pID=STR_ObjNameSingulSECT; break;
+            case SdrCircKind::Arc: pID=STR_ObjNameSingulCARC; break;
+            case SdrCircKind::Cut: pID=STR_ObjNameSingulCCUT; break;
+            default: break;
+        }
+    } else {
+        switch (meCircleKind) {
+            case SdrCircKind::Full: pID=STR_ObjNameSingulCIRCE; break;
+            case SdrCircKind::Section: pID=STR_ObjNameSingulSECTE; break;
+            case SdrCircKind::Arc: pID=STR_ObjNameSingulCARCE; break;
+            case SdrCircKind::Cut: pID=STR_ObjNameSingulCCUTE; break;
+            default: break;
+        }
+    }
+    OUStringBuffer sName(SvxResId(pID));
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+    return sName.makeStringAndClear();
+}
+
+OUString SdrCircObj::TakeObjNamePlural() const
+{
+    const char* pID=STR_ObjNamePluralCIRC;
+    if (maRect.GetWidth() == maRect.GetHeight() && aGeo.nShearAngle==0)
+    {
+        switch (meCircleKind) {
+            case SdrCircKind::Full: pID=STR_ObjNamePluralCIRC; break;
+            case SdrCircKind::Section: pID=STR_ObjNamePluralSECT; break;
+            case SdrCircKind::Arc: pID=STR_ObjNamePluralCARC; break;
+            case SdrCircKind::Cut: pID=STR_ObjNamePluralCCUT; break;
+            default: break;
+        }
+    } else {
+        switch (meCircleKind) {
+            case SdrCircKind::Full: pID=STR_ObjNamePluralCIRCE; break;
+            case SdrCircKind::Section: pID=STR_ObjNamePluralSECTE; break;
+            case SdrCircKind::Arc: pID=STR_ObjNamePluralCARCE; break;
+            case SdrCircKind::Cut: pID=STR_ObjNamePluralCCUTE; break;
+            default: break;
+        }
+    }
+    return SvxResId(pID);
+}
+
+SdrCircObj* SdrCircObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrCircObj >(rTargetModel);
+}
+
+SdrCircObj& SdrCircObj::operator=(const SdrCircObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrRectObj::operator=(rObj);
+
+    meCircleKind = rObj.meCircleKind;
+    nStartAngle = rObj.nStartAngle;
+    nEndAngle = rObj.nEndAngle;
+
+    return *this;
+}
+
+basegfx::B2DPolyPolygon SdrCircObj::TakeXorPoly() const
+{
+    const basegfx::B2DPolygon aCircPolygon(ImpCalcXPolyCirc(meCircleKind, maRect, nStartAngle, nEndAngle));
+    return basegfx::B2DPolyPolygon(aCircPolygon);
+}
+
+namespace {
+
+struct ImpCircUser : public SdrDragStatUserData
+{
+    tools::Rectangle                   aR;
+    Point                       aCenter;
+    Point                       aP1;
+    long                        nHgt;
+    long                        nWdt;
+    long                        nStart;
+    long                        nEnd;
+
+public:
+    ImpCircUser()
+    :   nHgt(0),
+        nWdt(0),
+        nStart(0),
+        nEnd(0)
+    {}
+    void SetCreateParams(SdrDragStat const & rStat);
+};
+
+}
+
+sal_uInt32 SdrCircObj::GetHdlCount() const
+{
+    if(SdrCircKind::Full != meCircleKind)
+    {
+        return 10;
+    }
+    else
+    {
+        return 8;
+    }
+}
+
+void SdrCircObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    for (sal_uInt32 nHdlNum=(SdrCircKind::Full==meCircleKind)?2:0; nHdlNum<=9; ++nHdlNum)
+    {
+        Point aPnt;
+        SdrHdlKind eLocalKind(SdrHdlKind::Move);
+        sal_uInt32 nPNum(0);
+
+        switch (nHdlNum)
+        {
+            case 0:
+                aPnt = GetAnglePnt(maRect,nStartAngle);
+                eLocalKind = SdrHdlKind::Circle;
+                nPNum = 1;
+                break;
+            case 1:
+                aPnt = GetAnglePnt(maRect,nEndAngle);
+                eLocalKind = SdrHdlKind::Circle;
+                nPNum = 2;
+                break;
+            case 2:
+                aPnt = maRect.TopLeft();
+                eLocalKind = SdrHdlKind::UpperLeft;
+                break;
+            case 3:
+                aPnt = maRect.TopCenter();
+                eLocalKind = SdrHdlKind::Upper;
+                break;
+            case 4:
+                aPnt = maRect.TopRight();
+                eLocalKind = SdrHdlKind::UpperRight;
+                break;
+            case 5:
+                aPnt = maRect.LeftCenter();
+                eLocalKind = SdrHdlKind::Left;
+                break;
+            case 6:
+                aPnt = maRect.RightCenter();
+                eLocalKind = SdrHdlKind::Right;
+                break;
+            case 7:
+                aPnt = maRect.BottomLeft();
+                eLocalKind = SdrHdlKind::LowerLeft;
+                break;
+            case 8:
+                aPnt = maRect.BottomCenter();
+                eLocalKind = SdrHdlKind::Lower;
+                break;
+            case 9:
+                aPnt = maRect.BottomRight();
+                eLocalKind = SdrHdlKind::LowerRight;
+                break;
+        }
+
+        if (aGeo.nShearAngle)
+        {
+            ShearPoint(aPnt,maRect.TopLeft(),aGeo.nTan);
+        }
+
+        if (aGeo.nRotationAngle)
+        {
+            RotatePoint(aPnt,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+        }
+
+        std::unique_ptr<SdrHdl> pH(new SdrHdl(aPnt,eLocalKind));
+        pH->SetPointNum(nPNum);
+        pH->SetObj(const_cast<SdrCircObj*>(this));
+        pH->SetRotationAngle(aGeo.nRotationAngle);
+        rHdlList.AddHdl(std::move(pH));
+    }
+}
+
+
+bool SdrCircObj::hasSpecialDrag() const
+{
+    return true;
+}
+
+bool SdrCircObj::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    const bool bAngle(rDrag.GetHdl() && SdrHdlKind::Circle == rDrag.GetHdl()->GetKind());
+
+    if(bAngle)
+    {
+        if(1 == rDrag.GetHdl()->GetPointNum() || 2 == rDrag.GetHdl()->GetPointNum())
+        {
+            rDrag.SetNoSnap();
+        }
+
+        return true;
+    }
+
+    return SdrTextObj::beginSpecialDrag(rDrag);
+}
+
+bool SdrCircObj::applySpecialDrag(SdrDragStat& rDrag)
+{
+    const bool bAngle(rDrag.GetHdl() && SdrHdlKind::Circle == rDrag.GetHdl()->GetKind());
+
+    if(bAngle)
+    {
+        Point aPt(rDrag.GetNow());
+
+        if (aGeo.nRotationAngle!=0)
+            RotatePoint(aPt,maRect.TopLeft(),-aGeo.nSin,aGeo.nCos);
+
+        if (aGeo.nShearAngle!=0)
+            ShearPoint(aPt,maRect.TopLeft(),-aGeo.nTan);
+
+        aPt -= maRect.Center();
+
+        long nWdt = maRect.Right() - maRect.Left();
+        long nHgt = maRect.Bottom() - maRect.Top();
+
+        if(nWdt>=nHgt)
+        {
+            aPt.setY(BigMulDiv(aPt.Y(),nWdt,nHgt) );
+        }
+        else
+        {
+            aPt.setX(BigMulDiv(aPt.X(),nHgt,nWdt) );
+        }
+
+        long nAngle=NormAngle36000(GetAngle(aPt));
+
+        if (rDrag.GetView() && rDrag.GetView()->IsAngleSnapEnabled())
+        {
+            long nSA=rDrag.GetView()->GetSnapAngle();
+
+            if (nSA!=0)
+            {
+                nAngle+=nSA/2;
+                nAngle/=nSA;
+                nAngle*=nSA;
+                nAngle=NormAngle36000(nAngle);
+            }
+        }
+
+        if(1 == rDrag.GetHdl()->GetPointNum())
+        {
+            nStartAngle = nAngle;
+        }
+        else if(2 == rDrag.GetHdl()->GetPointNum())
+        {
+            nEndAngle = nAngle;
+        }
+
+        SetRectsDirty();
+        SetXPolyDirty();
+        ImpSetCircInfoToAttr();
+        SetChanged();
+
+        return true;
+    }
+    else
+    {
+        return SdrTextObj::applySpecialDrag(rDrag);
+    }
+}
+
+OUString SdrCircObj::getSpecialDragComment(const SdrDragStat& rDrag) const
+{
+    const bool bCreateComment(rDrag.GetView() && this == rDrag.GetView()->GetCreateObj());
+
+    if(bCreateComment)
+    {
+        OUStringBuffer aBuf(ImpGetDescriptionStr(STR_ViewCreateObj));
+        const sal_uInt32 nPointCount(rDrag.GetPointCount());
+
+        if(SdrCircKind::Full != meCircleKind && nPointCount > 2)
+        {
+            const ImpCircUser* pU = static_cast<const ImpCircUser*>(rDrag.GetUser());
+            sal_Int32 nAngle;
+
+            aBuf.append(" (");
+
+            if(3 == nPointCount)
+            {
+                nAngle = pU->nStart;
+            }
+            else
+            {
+                nAngle = pU->nEnd;
+            }
+
+            aBuf.append(SdrModel::GetAngleString(nAngle));
+            aBuf.append(')');
+        }
+
+        return aBuf.makeStringAndClear();
+    }
+    else
+    {
+        const bool bAngle(rDrag.GetHdl() && SdrHdlKind::Circle == rDrag.GetHdl()->GetKind());
+
+        if(bAngle)
+        {
+            const sal_Int32 nAngle(1 == rDrag.GetHdl()->GetPointNum() ? nStartAngle : nEndAngle);
+
+            OUStringBuffer aBuf(ImpGetDescriptionStr(STR_DragCircAngle));
+            aBuf.append(" (");
+            aBuf.append(SdrModel::GetAngleString(nAngle));
+            aBuf.append(')');
+
+            return aBuf.makeStringAndClear();
+        }
+        else
+        {
+            return SdrTextObj::getSpecialDragComment(rDrag);
+        }
+    }
+}
+
+
+void ImpCircUser::SetCreateParams(SdrDragStat const & rStat)
+{
+    rStat.TakeCreateRect(aR);
+    aR.Justify();
+    aCenter=aR.Center();
+    nWdt=aR.Right()-aR.Left();
+    nHgt=aR.Bottom()-aR.Top();
+    nStart=0;
+    nEnd=36000;
+    if (rStat.GetPointCount()>2) {
+        Point aP(rStat.GetPoint(2)-aCenter);
+        if (nWdt==0) aP.setX(0 );
+        if (nHgt==0) aP.setY(0 );
+        if (nWdt>=nHgt) {
+            if (nHgt!=0) aP.setY(aP.Y()*nWdt/nHgt );
+        } else {
+            if (nWdt!=0) aP.setX(aP.X()*nHgt/nWdt );
+        }
+        nStart=NormAngle36000(GetAngle(aP));
+        if (rStat.GetView()!=nullptr && rStat.GetView()->IsAngleSnapEnabled()) {
+            long nSA=rStat.GetView()->GetSnapAngle();
+            if (nSA!=0) { // angle snapping
+                nStart+=nSA/2;
+                nStart/=nSA;
+                nStart*=nSA;
+                nStart=NormAngle36000(nStart);
+            }
+        }
+        aP1 = GetAnglePnt(aR,nStart);
+        nEnd=nStart;
+    } else aP1=aCenter;
+    if (rStat.GetPointCount()>3) {
+        Point aP(rStat.GetPoint(3)-aCenter);
+        if (nWdt>=nHgt) {
+            aP.setY(BigMulDiv(aP.Y(),nWdt,nHgt) );
+        } else {
+            aP.setX(BigMulDiv(aP.X(),nHgt,nWdt) );
+        }
+        nEnd=NormAngle36000(GetAngle(aP));
+        if (rStat.GetView()!=nullptr && rStat.GetView()->IsAngleSnapEnabled()) {
+            long nSA=rStat.GetView()->GetSnapAngle();
+            if (nSA!=0) { // angle snapping
+                nEnd+=nSA/2;
+                nEnd/=nSA;
+                nEnd*=nSA;
+                nEnd=NormAngle36000(nEnd);
+            }
+        }
+    }
+}
+
+void SdrCircObj::ImpSetCreateParams(SdrDragStat& rStat)
+{
+    ImpCircUser* pU=static_cast<ImpCircUser*>(rStat.GetUser());
+    if (pU==nullptr) {
+        pU=new ImpCircUser;
+        rStat.SetUser(std::unique_ptr<ImpCircUser>(pU));
+    }
+    pU->SetCreateParams(rStat);
+}
+
+bool SdrCircObj::BegCreate(SdrDragStat& rStat)
+{
+    rStat.SetOrtho4Possible();
+    tools::Rectangle aRect1(rStat.GetStart(), rStat.GetNow());
+    aRect1.Justify();
+    rStat.SetActionRect(aRect1);
+    maRect = aRect1;
+    ImpSetCreateParams(rStat);
+    return true;
+}
+
+bool SdrCircObj::MovCreate(SdrDragStat& rStat)
+{
+    ImpSetCreateParams(rStat);
+    ImpCircUser* pU=static_cast<ImpCircUser*>(rStat.GetUser());
+    rStat.SetActionRect(pU->aR);
+    maRect = pU->aR; // for ObjName
+    ImpJustifyRect(maRect);
+    nStartAngle=pU->nStart;
+    nEndAngle=pU->nEnd;
+    SetBoundRectDirty();
+    bSnapRectDirty=true;
+    SetXPolyDirty();
+
+    // #i103058# push current angle settings to ItemSet to
+    // allow FullDrag visualisation
+    if(rStat.GetPointCount() >= 4)
+    {
+        ImpSetCircInfoToAttr();
+    }
+
+    return true;
+}
+
+bool SdrCircObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    ImpSetCreateParams(rStat);
+    ImpCircUser* pU=static_cast<ImpCircUser*>(rStat.GetUser());
+    bool bRet = false;
+    if (eCmd==SdrCreateCmd::ForceEnd && rStat.GetPointCount()<4) meCircleKind=SdrCircKind::Full;
+    if (meCircleKind==SdrCircKind::Full) {
+        bRet=rStat.GetPointCount()>=2;
+        if (bRet) {
+            maRect = pU->aR;
+            ImpJustifyRect(maRect);
+        }
+    } else {
+        rStat.SetNoSnap(rStat.GetPointCount()>=2);
+        rStat.SetOrtho4Possible(rStat.GetPointCount()<2);
+        bRet=rStat.GetPointCount()>=4;
+        if (bRet) {
+            maRect = pU->aR;
+            ImpJustifyRect(maRect);
+            nStartAngle=pU->nStart;
+            nEndAngle=pU->nEnd;
+        }
+    }
+    bClosedObj=meCircleKind!=SdrCircKind::Arc;
+    SetRectsDirty();
+    SetXPolyDirty();
+    ImpSetCircInfoToAttr();
+    if (bRet)
+        rStat.SetUser(nullptr);
+    return bRet;
+}
+
+void SdrCircObj::BrkCreate(SdrDragStat& rStat)
+{
+    rStat.SetUser(nullptr);
+}
+
+bool SdrCircObj::BckCreate(SdrDragStat& rStat)
+{
+    rStat.SetNoSnap(rStat.GetPointCount()>=3);
+    rStat.SetOrtho4Possible(rStat.GetPointCount()<3);
+    return meCircleKind!=SdrCircKind::Full;
+}
+
+basegfx::B2DPolyPolygon SdrCircObj::TakeCreatePoly(const SdrDragStat& rDrag) const
+{
+    const ImpCircUser* pU = static_cast<const ImpCircUser*>(rDrag.GetUser());
+
+    if(rDrag.GetPointCount() < 4)
+    {
+        // force to OBJ_CIRC to get full visualisation
+        basegfx::B2DPolyPolygon aRetval(ImpCalcXPolyCirc(SdrCircKind::Full, pU->aR, pU->nStart, pU->nEnd));
+
+        if(3 == rDrag.GetPointCount())
+        {
+            // add edge to first point on ellipse
+            basegfx::B2DPolygon aNew;
+
+            aNew.append(basegfx::B2DPoint(pU->aCenter.X(), pU->aCenter.Y()));
+            aNew.append(basegfx::B2DPoint(pU->aP1.X(), pU->aP1.Y()));
+            aRetval.append(aNew);
+        }
+
+        return aRetval;
+    }
+    else
+    {
+        return basegfx::B2DPolyPolygon(ImpCalcXPolyCirc(meCircleKind, pU->aR, pU->nStart, pU->nEnd));
+    }
+}
+
+PointerStyle SdrCircObj::GetCreatePointer() const
+{
+    switch (meCircleKind) {
+        case SdrCircKind::Full: return PointerStyle::DrawEllipse;
+        case SdrCircKind::Section: return PointerStyle::DrawPie;
+        case SdrCircKind::Arc: return PointerStyle::DrawArc;
+        case SdrCircKind::Cut: return PointerStyle::DrawCircleCut;
+        default: break;
+    } // switch
+    return PointerStyle::Cross;
+}
+
+void SdrCircObj::NbcMove(const Size& aSiz)
+{
+    maRect.Move(aSiz);
+    aOutRect.Move(aSiz);
+    maSnapRect.Move(aSiz);
+    SetXPolyDirty();
+    SetRectsDirty(true);
+}
+
+void SdrCircObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    long nAngle0=aGeo.nRotationAngle;
+    bool bNoShearRota=(aGeo.nRotationAngle==0 && aGeo.nShearAngle==0);
+    SdrTextObj::NbcResize(rRef,xFact,yFact);
+    bNoShearRota|=(aGeo.nRotationAngle==0 && aGeo.nShearAngle==0);
+    if (meCircleKind!=SdrCircKind::Full) {
+        bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0);
+        bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0);
+        if (bXMirr || bYMirr) {
+            // At bXMirr!=bYMirr we should actually swap both line ends.
+            // That, however, is pretty bad (because of forced "hard" formatting).
+            // Alternatively, we could implement a bMirrored flag (maybe even
+            // a more general one, e. g. for mirrored text, ...).
+            long nS0=nStartAngle;
+            long nE0=nEndAngle;
+            if (bNoShearRota) {
+                // the RectObj already mirrors at VMirror because of a 180deg rotation
+                if (! (bXMirr && bYMirr)) {
+                    long nTmp=nS0;
+                    nS0=18000-nE0;
+                    nE0=18000-nTmp;
+                }
+            } else { // mirror contorted ellipses
+                if (bXMirr!=bYMirr) {
+                    nS0+=nAngle0;
+                    nE0+=nAngle0;
+                    if (bXMirr) {
+                        long nTmp=nS0;
+                        nS0=18000-nE0;
+                        nE0=18000-nTmp;
+                    }
+                    if (bYMirr) {
+                        long nTmp=nS0;
+                        nS0=-nE0;
+                        nE0=-nTmp;
+                    }
+                    nS0-=aGeo.nRotationAngle;
+                    nE0-=aGeo.nRotationAngle;
+                }
+            }
+            long nAngleDif=nE0-nS0;
+            nStartAngle=NormAngle36000(nS0);
+            nEndAngle  =NormAngle36000(nE0);
+            if (nAngleDif==36000) nEndAngle+=nAngleDif; // full circle
+        }
+    }
+    SetXPolyDirty();
+    ImpSetCircInfoToAttr();
+}
+
+void SdrCircObj::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    SdrTextObj::NbcShear(rRef,nAngle,tn,bVShear);
+    SetXPolyDirty();
+    ImpSetCircInfoToAttr();
+}
+
+void SdrCircObj::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    bool bFreeMirr=meCircleKind!=SdrCircKind::Full;
+    Point aTmpPt1;
+    Point aTmpPt2;
+    if (bFreeMirr) { // some preparations for using an arbitrary axis of reflection
+        Point aCenter(maRect.Center());
+        long nWdt=maRect.GetWidth()-1;
+        long nHgt=maRect.GetHeight()-1;
+        long nMaxRad=(std::max(nWdt,nHgt)+1) /2;
+        double a;
+        // starting point
+        a = nStartAngle * F_PI18000;
+        aTmpPt1=Point(FRound(cos(a)*nMaxRad),-FRound(sin(a)*nMaxRad));
+        if (nWdt==0) aTmpPt1.setX(0 );
+        if (nHgt==0) aTmpPt1.setY(0 );
+        aTmpPt1+=aCenter;
+        // finishing point
+        a = nEndAngle * F_PI18000;
+        aTmpPt2=Point(FRound(cos(a)*nMaxRad),-FRound(sin(a)*nMaxRad));
+        if (nWdt==0) aTmpPt2.setX(0 );
+        if (nHgt==0) aTmpPt2.setY(0 );
+        aTmpPt2+=aCenter;
+        if (aGeo.nRotationAngle!=0) {
+            RotatePoint(aTmpPt1,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+            RotatePoint(aTmpPt2,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+        }
+        if (aGeo.nShearAngle!=0) {
+            ShearPoint(aTmpPt1,maRect.TopLeft(),aGeo.nTan);
+            ShearPoint(aTmpPt2,maRect.TopLeft(),aGeo.nTan);
+        }
+    }
+    SdrTextObj::NbcMirror(rRef1,rRef2);
+    if (meCircleKind!=SdrCircKind::Full) { // adapt starting and finishing angle
+        MirrorPoint(aTmpPt1,rRef1,rRef2);
+        MirrorPoint(aTmpPt2,rRef1,rRef2);
+        // unrotate:
+        if (aGeo.nRotationAngle!=0) {
+            RotatePoint(aTmpPt1,maRect.TopLeft(),-aGeo.nSin,aGeo.nCos); // -sin for reversion
+            RotatePoint(aTmpPt2,maRect.TopLeft(),-aGeo.nSin,aGeo.nCos); // -sin for reversion
+        }
+        // unshear:
+        if (aGeo.nShearAngle!=0) {
+            ShearPoint(aTmpPt1,maRect.TopLeft(),-aGeo.nTan); // -tan for reversion
+            ShearPoint(aTmpPt2,maRect.TopLeft(),-aGeo.nTan); // -tan for reversion
+        }
+        Point aCenter(maRect.Center());
+        aTmpPt1-=aCenter;
+        aTmpPt2-=aCenter;
+        // because it's mirrored, the angles are swapped, too
+        nStartAngle=GetAngle(aTmpPt2);
+        nEndAngle  =GetAngle(aTmpPt1);
+        long nAngleDif=nEndAngle-nStartAngle;
+        nStartAngle=NormAngle36000(nStartAngle);
+        nEndAngle  =NormAngle36000(nEndAngle);
+        if (nAngleDif==36000) nEndAngle+=nAngleDif; // full circle
+    }
+    SetXPolyDirty();
+    ImpSetCircInfoToAttr();
+}
+
+SdrObjGeoData* SdrCircObj::NewGeoData() const
+{
+    return new SdrCircObjGeoData;
+}
+
+void SdrCircObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrRectObj::SaveGeoData(rGeo);
+    SdrCircObjGeoData& rCGeo=static_cast<SdrCircObjGeoData&>(rGeo);
+    rCGeo.nStartAngle=nStartAngle;
+    rCGeo.nEndAngle  =nEndAngle;
+}
+
+void SdrCircObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrRectObj::RestGeoData(rGeo);
+    const SdrCircObjGeoData& rCGeo=static_cast<const SdrCircObjGeoData&>(rGeo);
+    nStartAngle=rCGeo.nStartAngle;
+    nEndAngle  =rCGeo.nEndAngle;
+    SetXPolyDirty();
+    ImpSetCircInfoToAttr();
+}
+
+static void Union(tools::Rectangle& rR, const Point& rP)
+{
+    if (rP.X()<rR.Left  ()) rR.SetLeft(rP.X() );
+    if (rP.X()>rR.Right ()) rR.SetRight(rP.X() );
+    if (rP.Y()<rR.Top   ()) rR.SetTop(rP.Y() );
+    if (rP.Y()>rR.Bottom()) rR.SetBottom(rP.Y() );
+}
+
+void SdrCircObj::TakeUnrotatedSnapRect(tools::Rectangle& rRect) const
+{
+    rRect = maRect;
+    if (meCircleKind!=SdrCircKind::Full) {
+        const Point aPntStart(GetAnglePnt(maRect,nStartAngle));
+        const Point aPntEnd(GetAnglePnt(maRect,nEndAngle));
+        long a=nStartAngle;
+        long e=nEndAngle;
+        rRect.SetLeft(maRect.Right() );
+        rRect.SetRight(maRect.Left() );
+        rRect.SetTop(maRect.Bottom() );
+        rRect.SetBottom(maRect.Top() );
+        Union(rRect,aPntStart);
+        Union(rRect,aPntEnd);
+        if ((a<=18000 && e>=18000) || (a>e && (a<=18000 || e>=18000))) {
+            Union(rRect,maRect.LeftCenter());
+        }
+        if ((a<=27000 && e>=27000) || (a>e && (a<=27000 || e>=27000))) {
+            Union(rRect,maRect.BottomCenter());
+        }
+        if (a>e) {
+            Union(rRect,maRect.RightCenter());
+        }
+        if ((a<=9000 && e>=9000) || (a>e && (a<=9000 || e>=9000))) {
+            Union(rRect,maRect.TopCenter());
+        }
+        if (meCircleKind==SdrCircKind::Section) {
+            Union(rRect,maRect.Center());
+        }
+        if (aGeo.nRotationAngle!=0) {
+            Point aDst(rRect.TopLeft());
+            aDst-=maRect.TopLeft();
+            Point aDst0(aDst);
+            RotatePoint(aDst,Point(),aGeo.nSin,aGeo.nCos);
+            aDst-=aDst0;
+            rRect.Move(aDst.X(),aDst.Y());
+        }
+    }
+    if (aGeo.nShearAngle!=0) {
+        long nDst=FRound((rRect.Bottom()-rRect.Top())*aGeo.nTan);
+        if (aGeo.nShearAngle>0) {
+            Point aRef(rRect.TopLeft());
+            rRect.AdjustLeft( -nDst );
+            Point aTmpPt(rRect.TopLeft());
+            RotatePoint(aTmpPt,aRef,aGeo.nSin,aGeo.nCos);
+            aTmpPt-=rRect.TopLeft();
+            rRect.Move(aTmpPt.X(),aTmpPt.Y());
+        } else {
+            rRect.AdjustRight( -nDst );
+        }
+    }
+}
+
+void SdrCircObj::RecalcSnapRect()
+{
+    if (PaintNeedsXPolyCirc()) {
+        maSnapRect=GetXPoly().GetBoundRect();
+    } else {
+        TakeUnrotatedSnapRect(maSnapRect);
+    }
+}
+
+void SdrCircObj::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    if (aGeo.nRotationAngle!=0 || aGeo.nShearAngle!=0 || meCircleKind!=SdrCircKind::Full) {
+        tools::Rectangle aSR0(GetSnapRect());
+        long nWdt0=aSR0.Right()-aSR0.Left();
+        long nHgt0=aSR0.Bottom()-aSR0.Top();
+        long nWdt1=rRect.Right()-rRect.Left();
+        long nHgt1=rRect.Bottom()-rRect.Top();
+        NbcResize(maSnapRect.TopLeft(),Fraction(nWdt1,nWdt0),Fraction(nHgt1,nHgt0));
+        NbcMove(Size(rRect.Left()-aSR0.Left(),rRect.Top()-aSR0.Top()));
+    } else {
+        maRect=rRect;
+        ImpJustifyRect(maRect);
+    }
+    SetRectsDirty();
+    SetXPolyDirty();
+    ImpSetCircInfoToAttr();
+}
+
+sal_uInt32 SdrCircObj::GetSnapPointCount() const
+{
+    if (meCircleKind==SdrCircKind::Full) {
+        return 1;
+    } else {
+        return 3;
+    }
+}
+
+Point SdrCircObj::GetSnapPoint(sal_uInt32 i) const
+{
+    switch (i) {
+        case 1 : return GetAnglePnt(maRect,nStartAngle);
+        case 2 : return GetAnglePnt(maRect,nEndAngle);
+        default: return maRect.Center();
+    }
+}
+
+void SdrCircObj::Notify(SfxBroadcaster& rBC, const SfxHint& rHint)
+{
+    SetXPolyDirty();
+    SdrRectObj::Notify(rBC,rHint);
+    ImpSetAttrToCircInfo();
+}
+
+
+void SdrCircObj::ImpSetAttrToCircInfo()
+{
+    const SfxItemSet& rSet = GetObjectItemSet();
+    SdrCircKind eNewKind = rSet.Get(SDRATTR_CIRCKIND).GetValue();
+
+    sal_Int32 nNewStart = rSet.Get(SDRATTR_CIRCSTARTANGLE).GetValue();
+    sal_Int32 nNewEnd = rSet.Get(SDRATTR_CIRCENDANGLE).GetValue();
+
+    bool bKindChg = meCircleKind != eNewKind;
+    bool bAngleChg = nNewStart != nStartAngle || nNewEnd != nEndAngle;
+
+    if(bKindChg || bAngleChg)
+    {
+        meCircleKind = eNewKind;
+        nStartAngle = nNewStart;
+        nEndAngle = nNewEnd;
+
+        if(bKindChg || (meCircleKind != SdrCircKind::Full && bAngleChg))
+        {
+            SetXPolyDirty();
+            SetRectsDirty();
+        }
+    }
+}
+
+void SdrCircObj::ImpSetCircInfoToAttr()
+{
+    const SfxItemSet& rSet = GetObjectItemSet();
+
+    SdrCircKind eOldKindA = rSet.Get(SDRATTR_CIRCKIND).GetValue();
+    sal_Int32 nOldStartAngle = rSet.Get(SDRATTR_CIRCSTARTANGLE).GetValue();
+    sal_Int32 nOldEndAngle = rSet.Get(SDRATTR_CIRCENDANGLE).GetValue();
+
+    if(meCircleKind != eOldKindA || nStartAngle != nOldStartAngle || nEndAngle != nOldEndAngle)
+    {
+        // since SetItem() implicitly calls ImpSetAttrToCircInfo()
+        // setting the item directly is necessary here.
+        if(meCircleKind != eOldKindA)
+        {
+            GetProperties().SetObjectItemDirect(SdrCircKindItem(meCircleKind));
+        }
+
+        if(nStartAngle != nOldStartAngle)
+        {
+            GetProperties().SetObjectItemDirect(makeSdrCircStartAngleItem(nStartAngle));
+        }
+
+        if(nEndAngle != nOldEndAngle)
+        {
+            GetProperties().SetObjectItemDirect(makeSdrCircEndAngleItem(nEndAngle));
+        }
+
+        SetXPolyDirty();
+        ImpSetAttrToCircInfo();
+    }
+}
+
+SdrObjectUniquePtr SdrCircObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    const bool bFill(meCircleKind != SdrCircKind::Arc);
+    const basegfx::B2DPolygon aCircPolygon(ImpCalcXPolyCirc(meCircleKind, maRect, nStartAngle, nEndAngle));
+    SdrObjectUniquePtr pRet = ImpConvertMakeObj(basegfx::B2DPolyPolygon(aCircPolygon), bFill, bBezier);
+
+    if(bAddText)
+    {
+        pRet = ImpConvertAddText(std::move(pRet), bBezier);
+    }
+
+    return pRet;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdoedge.cxx b/svx/source/svdraw/svdoedge.cxx
new file mode 100644
index 000000000..f4dd1c994
--- /dev/null
+++ b/svx/source/svdraw/svdoedge.cxx
@@ -0,0 +1,2625 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <svl/hint.hxx>
+#include <rtl/ustrbuf.hxx>
+
+#include <sdr/contact/viewcontactofsdredgeobj.hxx>
+#include <sdr/properties/connectorproperties.hxx>
+#include <svx/sdrhittesthelper.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svddrgmt.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdview.hxx>
+#include <svx/sxekitm.hxx>
+#include <svx/sxelditm.hxx>
+#include <svx/sxenditm.hxx>
+#include <svx/xpoly.hxx>
+#include <vcl/ptrstyle.hxx>
+
+void SdrObjConnection::ResetVars()
+{
+    pObj=nullptr;
+    nConId=0;
+    bBestConn=true;
+    bBestVertex=true;
+    bAutoVertex=false;
+    bAutoCorner=false;
+}
+
+bool SdrObjConnection::TakeGluePoint(SdrGluePoint& rGP) const
+{
+    bool bRet = false;
+    if (pObj!=nullptr) { // one object has to be docked already!
+        if (bAutoVertex) {
+            rGP=pObj->GetVertexGluePoint(nConId);
+            bRet = true;
+        } else if (bAutoCorner) {
+            rGP=pObj->GetCornerGluePoint(nConId);
+            bRet = true;
+        } else {
+            const SdrGluePointList* pGPL=pObj->GetGluePointList();
+            if (pGPL!=nullptr) {
+                sal_uInt16 nNum=pGPL->FindGluePoint(nConId);
+                if (nNum!=SDRGLUEPOINT_NOTFOUND) {
+                    rGP=(*pGPL)[nNum];
+                    bRet = true;
+                }
+            }
+        }
+    }
+    if (bRet) {
+        Point aPt(rGP.GetAbsolutePos(*pObj));
+        aPt+=aObjOfs;
+        rGP.SetPos(aPt);
+    }
+    return bRet;
+}
+
+Point& SdrEdgeInfoRec::ImpGetLineOffsetPoint(SdrEdgeLineCode eLineCode)
+{
+    switch (eLineCode) {
+        case SdrEdgeLineCode::Obj1Line2 : return aObj1Line2;
+        case SdrEdgeLineCode::Obj1Line3 : return aObj1Line3;
+        case SdrEdgeLineCode::Obj2Line2 : return aObj2Line2;
+        case SdrEdgeLineCode::Obj2Line3 : return aObj2Line3;
+        case SdrEdgeLineCode::MiddleLine: return aMiddleLine;
+    } // switch
+    return aMiddleLine;
+}
+
+sal_uInt16 SdrEdgeInfoRec::ImpGetPolyIdx(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const
+{
+    switch (eLineCode) {
+        case SdrEdgeLineCode::Obj1Line2 : return 1;
+        case SdrEdgeLineCode::Obj1Line3 : return 2;
+        case SdrEdgeLineCode::Obj2Line2 : return rXP.GetPointCount()-3;
+        case SdrEdgeLineCode::Obj2Line3 : return rXP.GetPointCount()-4;
+        case SdrEdgeLineCode::MiddleLine: return nMiddleLine;
+    } // switch
+    return 0;
+}
+
+bool SdrEdgeInfoRec::ImpIsHorzLine(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const
+{
+    sal_uInt16 nIdx=ImpGetPolyIdx(eLineCode,rXP);
+    bool bHorz=nAngle1==0 || nAngle1==18000;
+    if (eLineCode==SdrEdgeLineCode::Obj2Line2 || eLineCode==SdrEdgeLineCode::Obj2Line3) {
+        nIdx=rXP.GetPointCount()-nIdx;
+        bHorz=nAngle2==0 || nAngle2==18000;
+    }
+    if ((nIdx & 1)==1) bHorz=!bHorz;
+    return bHorz;
+}
+
+void SdrEdgeInfoRec::ImpSetLineOffset(SdrEdgeLineCode eLineCode, const XPolygon& rXP, long nVal)
+{
+    Point& rPt=ImpGetLineOffsetPoint(eLineCode);
+    if (ImpIsHorzLine(eLineCode,rXP)) rPt.setY(nVal );
+    else rPt.setX(nVal );
+}
+
+long SdrEdgeInfoRec::ImpGetLineOffset(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const
+{
+    const Point& rPt = const_cast<SdrEdgeInfoRec*>(this)->ImpGetLineOffsetPoint(eLineCode);
+    if (ImpIsHorzLine(eLineCode,rXP))
+        return rPt.Y();
+    else
+        return rPt.X();
+}
+
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrEdgeObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::ConnectorProperties>(*this);
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrEdgeObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrEdgeObj>(*this);
+}
+
+
+SdrEdgeObj::SdrEdgeObj(SdrModel& rSdrModel)
+:   SdrTextObj(rSdrModel),
+    nNotifyingCount(0),
+    bEdgeTrackDirty(false),
+    bEdgeTrackUserDefined(false),
+    // Default is to allow default connects
+    mbSuppressDefaultConnect(false),
+    mbBoundRectCalculationRunning(false),
+    mbSuppressed(false)
+{
+    bClosedObj=false;
+    bIsEdge=true;
+    pEdgeTrack.reset(new XPolygon);
+}
+
+SdrEdgeObj::~SdrEdgeObj()
+{
+    SdrEdgeObj::DisconnectFromNode(true);
+    SdrEdgeObj::DisconnectFromNode(false);
+}
+
+void SdrEdgeObj::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage)
+{
+    // call parent
+    SdrTextObj::handlePageChange(pOldPage, pNewPage);
+
+    if(nullptr != GetConnection(true).GetObject() || nullptr != GetConnection(false).GetObject())
+    {
+        // check broadcasters; when we are not inserted we do not need broadcasters
+        // TTTT not yet added, but keep hint to do this here
+        // mpCon1->ownerPageChange();
+        // mpCon2->ownerPageChange();
+    }
+}
+
+void SdrEdgeObj::ImpSetAttrToEdgeInfo()
+{
+    const SfxItemSet& rSet = GetObjectItemSet();
+    SdrEdgeKind eKind = rSet.Get(SDRATTR_EDGEKIND).GetValue();
+    sal_Int32 nVal1 = rSet.Get(SDRATTR_EDGELINE1DELTA).GetValue();
+    sal_Int32 nVal2 = rSet.Get(SDRATTR_EDGELINE2DELTA).GetValue();
+    sal_Int32 nVal3 = rSet.Get(SDRATTR_EDGELINE3DELTA).GetValue();
+
+    if(eKind == SdrEdgeKind::OrthoLines || eKind == SdrEdgeKind::Bezier)
+    {
+        sal_Int32 nVals[3] = { nVal1, nVal2, nVal3 };
+        sal_uInt16 n = 0;
+
+        if(aEdgeInfo.nObj1Lines >= 2 && n < 3)
+        {
+            aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj1Line2, *pEdgeTrack, nVals[n]);
+            n++;
+        }
+
+        if(aEdgeInfo.nObj1Lines >= 3 && n < 3)
+        {
+            aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj1Line3, *pEdgeTrack, nVals[n]);
+            n++;
+        }
+
+        if(aEdgeInfo.nMiddleLine != 0xFFFF && n < 3)
+        {
+            aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::MiddleLine, *pEdgeTrack, nVals[n]);
+            n++;
+        }
+
+        if(aEdgeInfo.nObj2Lines >= 3 && n < 3)
+        {
+            aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj2Line3, *pEdgeTrack, nVals[n]);
+            n++;
+        }
+
+        if(aEdgeInfo.nObj2Lines >= 2 && n < 3)
+        {
+            aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj2Line2, *pEdgeTrack, nVals[n]);
+            n++;
+        }
+    }
+    else if(eKind == SdrEdgeKind::ThreeLines)
+    {
+        bool bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000;
+        bool bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000;
+
+        if(bHor1)
+        {
+            aEdgeInfo.aObj1Line2.setX( nVal1 );
+        }
+        else
+        {
+            aEdgeInfo.aObj1Line2.setY( nVal1 );
+        }
+
+        if(bHor2)
+        {
+            aEdgeInfo.aObj2Line2.setX( nVal2 );
+        }
+        else
+        {
+            aEdgeInfo.aObj2Line2.setY( nVal2 );
+        }
+    }
+
+    ImpDirtyEdgeTrack();
+}
+
+void SdrEdgeObj::ImpSetEdgeInfoToAttr()
+{
+    const SfxItemSet& rSet = GetObjectItemSet();
+    SdrEdgeKind eKind = rSet.Get(SDRATTR_EDGEKIND).GetValue();
+    sal_Int32 nValCnt = rSet.Get(SDRATTR_EDGELINEDELTACOUNT).GetValue();
+    sal_Int32 nVal1 = rSet.Get(SDRATTR_EDGELINE1DELTA).GetValue();
+    sal_Int32 nVal2 = rSet.Get(SDRATTR_EDGELINE2DELTA).GetValue();
+    sal_Int32 nVal3 = rSet.Get(SDRATTR_EDGELINE3DELTA).GetValue();
+    sal_Int32 nVals[3] = { nVal1, nVal2, nVal3 };
+    sal_uInt16 n = 0;
+
+    if(eKind == SdrEdgeKind::OrthoLines || eKind == SdrEdgeKind::Bezier)
+    {
+        if(aEdgeInfo.nObj1Lines >= 2 && n < 3)
+        {
+            nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj1Line2, *pEdgeTrack);
+            n++;
+        }
+
+        if(aEdgeInfo.nObj1Lines >= 3 && n < 3)
+        {
+            nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj1Line3, *pEdgeTrack);
+            n++;
+        }
+
+        if(aEdgeInfo.nMiddleLine != 0xFFFF && n < 3)
+        {
+            nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::MiddleLine, *pEdgeTrack);
+            n++;
+        }
+
+        if(aEdgeInfo.nObj2Lines >= 3 && n < 3)
+        {
+            nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj2Line3, *pEdgeTrack);
+            n++;
+        }
+
+        if(aEdgeInfo.nObj2Lines >= 2 && n < 3)
+        {
+            nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj2Line2, *pEdgeTrack);
+            n++;
+        }
+    }
+    else if(eKind == SdrEdgeKind::ThreeLines)
+    {
+        bool bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000;
+        bool bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000;
+
+        n = 2;
+        nVals[0] = bHor1 ? aEdgeInfo.aObj1Line2.X() : aEdgeInfo.aObj1Line2.Y();
+        nVals[1] = bHor2 ? aEdgeInfo.aObj2Line2.X() : aEdgeInfo.aObj2Line2.Y();
+    }
+
+    if(n != nValCnt || nVals[0] != nVal1 || nVals[1] != nVal2 || nVals[2] != nVal3)
+    {
+        // Here no more notifying is necessary, just local changes are OK.
+        if(n != nValCnt)
+        {
+            GetProperties().SetObjectItemDirect(SdrEdgeLineDeltaCountItem(n));
+        }
+
+        if(nVals[0] != nVal1)
+        {
+            GetProperties().SetObjectItemDirect(makeSdrEdgeLine1DeltaItem(nVals[0]));
+        }
+
+        if(nVals[1] != nVal2)
+        {
+            GetProperties().SetObjectItemDirect(makeSdrEdgeLine2DeltaItem(nVals[1]));
+        }
+
+        if(nVals[2] != nVal3)
+        {
+            GetProperties().SetObjectItemDirect(makeSdrEdgeLine3DeltaItem(nVals[2]));
+        }
+
+        if(n < 3)
+        {
+            GetProperties().ClearObjectItemDirect(SDRATTR_EDGELINE3DELTA);
+        }
+
+        if(n < 2)
+        {
+            GetProperties().ClearObjectItemDirect(SDRATTR_EDGELINE2DELTA);
+        }
+
+        if(n < 1)
+        {
+            GetProperties().ClearObjectItemDirect(SDRATTR_EDGELINE1DELTA);
+        }
+    }
+}
+
+void SdrEdgeObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    // #i54102# allow rotation, mirror and shear
+    rInfo.bRotateFreeAllowed = true;
+    rInfo.bRotate90Allowed = true;
+    rInfo.bMirrorFreeAllowed = true;
+    rInfo.bMirror45Allowed = true;
+    rInfo.bMirror90Allowed = true;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed = true;
+    rInfo.bEdgeRadiusAllowed = false;
+    bool bCanConv=!HasText() || ImpCanConvTextToCurve();
+    rInfo.bCanConvToPath=bCanConv;
+    rInfo.bCanConvToPoly=bCanConv;
+    rInfo.bCanConvToContour = (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary());
+}
+
+sal_uInt16 SdrEdgeObj::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_EDGE);
+}
+
+const tools::Rectangle& SdrEdgeObj::GetCurrentBoundRect() const
+{
+    if(bEdgeTrackDirty)
+    {
+        const_cast<SdrEdgeObj*>(this)->ImpRecalcEdgeTrack();
+    }
+
+    return SdrTextObj::GetCurrentBoundRect();
+}
+
+const tools::Rectangle& SdrEdgeObj::GetSnapRect() const
+{
+    if(bEdgeTrackDirty)
+    {
+        const_cast<SdrEdgeObj*>(this)->ImpRecalcEdgeTrack();
+    }
+
+    return SdrTextObj::GetSnapRect();
+}
+
+void SdrEdgeObj::RecalcSnapRect()
+{
+    maSnapRect=pEdgeTrack->GetBoundRect();
+}
+
+void SdrEdgeObj::TakeUnrotatedSnapRect(tools::Rectangle& rRect) const
+{
+    rRect=GetSnapRect();
+}
+
+SdrGluePoint SdrEdgeObj::GetVertexGluePoint(sal_uInt16 nNum) const
+{
+    Point aPt;
+    sal_uInt16 nPointCount=pEdgeTrack->GetPointCount();
+    if (nPointCount>0)
+    {
+        Point aOfs = GetSnapRect().Center();
+        if (nNum==2 && GetConnectedNode(true)==nullptr) aPt=(*pEdgeTrack)[0];
+        else if (nNum==3 && GetConnectedNode(false)==nullptr) aPt=(*pEdgeTrack)[nPointCount-1];
+        else {
+            if ((nPointCount & 1) ==1) {
+                aPt=(*pEdgeTrack)[nPointCount/2];
+            } else {
+                Point aPt1((*pEdgeTrack)[nPointCount/2-1]);
+                Point aPt2((*pEdgeTrack)[nPointCount/2]);
+                aPt1+=aPt2;
+                aPt1.setX( aPt1.X() / 2 );
+                aPt1.setY( aPt1.Y() / 2 );
+                aPt=aPt1;
+            }
+        }
+        aPt-=aOfs;
+    }
+    SdrGluePoint aGP(aPt);
+    aGP.SetPercent(false);
+    return aGP;
+}
+
+SdrGluePoint SdrEdgeObj::GetCornerGluePoint(sal_uInt16 nNum) const
+{
+    return GetVertexGluePoint(nNum);
+}
+
+const SdrGluePointList* SdrEdgeObj::GetGluePointList() const
+{
+    return nullptr; // no user defined glue points for connectors
+}
+
+SdrGluePointList* SdrEdgeObj::ForceGluePointList()
+{
+    return nullptr; // no user defined glue points for connectors
+}
+
+void SdrEdgeObj::ConnectToNode(bool bTail1, SdrObject* pObj)
+{
+    SdrObjConnection& rCon=GetConnection(bTail1);
+    DisconnectFromNode(bTail1);
+    if (pObj!=nullptr) {
+        pObj->AddListener(*this);
+        rCon.pObj=pObj;
+
+        // #i120437# If connection is set, reset bEdgeTrackUserDefined
+        bEdgeTrackUserDefined = false;
+
+        ImpDirtyEdgeTrack();
+    }
+}
+
+void SdrEdgeObj::DisconnectFromNode(bool bTail1)
+{
+    SdrObjConnection& rCon=GetConnection(bTail1);
+    if (rCon.pObj!=nullptr) {
+        rCon.pObj->RemoveListener(*this);
+        rCon.pObj=nullptr;
+    }
+}
+
+SdrObject* SdrEdgeObj::GetConnectedNode(bool bTail1) const
+{
+    SdrObject* pObj(GetConnection(bTail1).pObj);
+
+    if(nullptr != pObj
+        && (pObj->getSdrPageFromSdrObject() != getSdrPageFromSdrObject() || !pObj->IsInserted()))
+    {
+        pObj = nullptr;
+    }
+
+    return pObj;
+}
+
+bool SdrEdgeObj::CheckNodeConnection(bool bTail1) const
+{
+    bool bRet = false;
+    const SdrObjConnection& rCon=GetConnection(bTail1);
+    sal_uInt16 nPointCount=pEdgeTrack->GetPointCount();
+
+    if(nullptr != rCon.pObj && rCon.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject() && 0 != nPointCount)
+    {
+        const SdrGluePointList* pGPL=rCon.pObj->GetGluePointList();
+        sal_uInt16 nGluePointCnt=pGPL==nullptr ? 0 : pGPL->GetCount();
+        sal_uInt16 nGesAnz=nGluePointCnt+8;
+        Point aTail(bTail1 ? (*pEdgeTrack)[0] : (*pEdgeTrack)[sal_uInt16(nPointCount-1)]);
+        for (sal_uInt16 i=0; i<nGesAnz && !bRet; i++) {
+            if (i<nGluePointCnt) { // UserDefined
+                bRet=aTail==(*pGPL)[i].GetAbsolutePos(*rCon.pObj);
+            } else if (i<nGluePointCnt+4) { // Vertex
+                SdrGluePoint aPt(rCon.pObj->GetVertexGluePoint(i-nGluePointCnt));
+                bRet=aTail==aPt.GetAbsolutePos(*rCon.pObj);
+            } else {                  // Corner
+                SdrGluePoint aPt(rCon.pObj->GetCornerGluePoint(i-nGluePointCnt-4));
+                bRet=aTail==aPt.GetAbsolutePos(*rCon.pObj);
+            }
+        }
+    }
+    return bRet;
+}
+
+void SdrEdgeObj::ImpSetTailPoint(bool bTail1, const Point& rPt)
+{
+    sal_uInt16 nPointCount=pEdgeTrack->GetPointCount();
+    if (nPointCount==0) {
+        (*pEdgeTrack)[0]=rPt;
+        (*pEdgeTrack)[1]=rPt;
+    } else if (nPointCount==1) {
+        if (!bTail1) (*pEdgeTrack)[1]=rPt;
+        else { (*pEdgeTrack)[1]=(*pEdgeTrack)[0]; (*pEdgeTrack)[0]=rPt; }
+    } else {
+        if (!bTail1) (*pEdgeTrack)[sal_uInt16(nPointCount-1)]=rPt;
+        else (*pEdgeTrack)[0]=rPt;
+    }
+    ImpRecalcEdgeTrack();
+    SetRectsDirty();
+}
+
+void SdrEdgeObj::ImpDirtyEdgeTrack()
+{
+    if ( !bEdgeTrackUserDefined || !getSdrModelFromSdrObject().isLocked() )
+        bEdgeTrackDirty = true;
+}
+
+void SdrEdgeObj::ImpUndirtyEdgeTrack()
+{
+    if (bEdgeTrackDirty && getSdrModelFromSdrObject().isLocked())
+    {
+        ImpRecalcEdgeTrack();
+    }
+}
+
+void SdrEdgeObj::ImpRecalcEdgeTrack()
+{
+    // #i120437# if bEdgeTrackUserDefined, do not recalculate
+    if(bEdgeTrackUserDefined)
+    {
+        return;
+    }
+
+    // #i120437# also not when model locked during import, but remember
+    if(getSdrModelFromSdrObject().isLocked())
+    {
+        mbSuppressed = true;
+        return;
+    }
+
+    // #i110649#
+    if(mbBoundRectCalculationRunning)
+    {
+        // This object is involved into another ImpRecalcEdgeTrack() call
+        // from another SdrEdgeObj. Do not calculate again to avoid loop.
+        // Also, do not change bEdgeTrackDirty so that it gets recalculated
+        // later at the first non-looping call.
+    }
+    else
+    {
+        // To not run in a depth loop, use a coloring algorithm on
+        // SdrEdgeObj BoundRect calculations
+        mbBoundRectCalculationRunning = true;
+
+        if(mbSuppressed)
+        {
+            // #i123048# If layouting was ever suppressed, it needs to be done once
+            // and the attr need to be set at EdgeInfo, else these attr *will be lost*
+            // in the following call to ImpSetEdgeInfoToAttr() since they were never
+            // set before (!)
+            *pEdgeTrack=ImpCalcEdgeTrack(*pEdgeTrack,aCon1,aCon2,&aEdgeInfo);
+            ImpSetAttrToEdgeInfo();
+            mbSuppressed = false;
+        }
+
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetCurrentBoundRect();
+        SetRectsDirty();
+        *pEdgeTrack=ImpCalcEdgeTrack(*pEdgeTrack,aCon1,aCon2,&aEdgeInfo);
+        ImpSetEdgeInfoToAttr(); // copy values from aEdgeInfo into the pool
+        bEdgeTrackDirty=false;
+
+        // Only redraw here, no object change
+        ActionChanged();
+
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+
+        mbBoundRectCalculationRunning = false;
+    }
+}
+
+SdrEscapeDirection SdrEdgeObj::ImpCalcEscAngle(SdrObject const * pObj, const Point& rPt)
+{
+    if (pObj==nullptr) return SdrEscapeDirection::ALL;
+    tools::Rectangle aR(pObj->GetSnapRect());
+    long dxl=rPt.X()-aR.Left();
+    long dyo=rPt.Y()-aR.Top();
+    long dxr=aR.Right()-rPt.X();
+    long dyu=aR.Bottom()-rPt.Y();
+    bool bxMitt=std::abs(dxl-dxr)<2;
+    bool byMitt=std::abs(dyo-dyu)<2;
+    long dx=std::min(dxl,dxr);
+    long dy=std::min(dyo,dyu);
+    bool bDiag=std::abs(dx-dy)<2;
+    if (bxMitt && byMitt) return SdrEscapeDirection::ALL; // in the center
+    if (bDiag) {  // diagonally
+        SdrEscapeDirection nRet=SdrEscapeDirection::SMART;
+        if (byMitt) nRet|=SdrEscapeDirection::VERT;
+        if (bxMitt) nRet|=SdrEscapeDirection::HORZ;
+        if (dxl<dxr) { // left
+            if (dyo<dyu) nRet|=SdrEscapeDirection::LEFT | SdrEscapeDirection::TOP;
+            else nRet|=SdrEscapeDirection::LEFT | SdrEscapeDirection::BOTTOM;
+        } else {       // right
+            if (dyo<dyu) nRet|=SdrEscapeDirection::RIGHT | SdrEscapeDirection::TOP;
+            else nRet|=SdrEscapeDirection::RIGHT | SdrEscapeDirection::BOTTOM;
+        }
+        return nRet;
+    }
+    if (dx<dy) { // horizontal
+        if (bxMitt) return SdrEscapeDirection::HORZ;
+        if (dxl<dxr) return SdrEscapeDirection::LEFT;
+        else return SdrEscapeDirection::RIGHT;
+    } else {     // vertical
+        if (byMitt) return SdrEscapeDirection::VERT;
+        if (dyo<dyu) return SdrEscapeDirection::TOP;
+        else return SdrEscapeDirection::BOTTOM;
+    }
+}
+
+XPolygon SdrEdgeObj::ImpCalcObjToCenter(const Point& rStPt, long nEscAngle, const tools::Rectangle& rRect, const Point& rMeeting)
+{
+    XPolygon aXP;
+    aXP.Insert(XPOLY_APPEND,rStPt,PolyFlags::Normal);
+    bool bRts=nEscAngle==0;
+    bool bObn=nEscAngle==9000;
+    bool bLks=nEscAngle==18000;
+    bool bUnt=nEscAngle==27000;
+
+    Point aP1(rStPt); // mandatory difference first,...
+    if (bLks) aP1.setX(rRect.Left() );
+    if (bRts) aP1.setX(rRect.Right() );
+    if (bObn) aP1.setY(rRect.Top() );
+    if (bUnt) aP1.setY(rRect.Bottom() );
+
+    Point aP2(aP1); // ...now increase to Meeting height, if necessary
+    if (bLks && rMeeting.X()<=aP2.X()) aP2.setX(rMeeting.X() );
+    if (bRts && rMeeting.X()>=aP2.X()) aP2.setX(rMeeting.X() );
+    if (bObn && rMeeting.Y()<=aP2.Y()) aP2.setY(rMeeting.Y() );
+    if (bUnt && rMeeting.Y()>=aP2.Y()) aP2.setY(rMeeting.Y() );
+    aXP.Insert(XPOLY_APPEND,aP2,PolyFlags::Normal);
+
+    Point aP3(aP2);
+    if ((bLks && rMeeting.X()>aP2.X()) || (bRts && rMeeting.X()<aP2.X())) { // around
+        if (rMeeting.Y()<aP2.Y()) {
+            aP3.setY(rRect.Top() );
+            if (rMeeting.Y()<aP3.Y()) aP3.setY(rMeeting.Y() );
+        } else {
+            aP3.setY(rRect.Bottom() );
+            if (rMeeting.Y()>aP3.Y()) aP3.setY(rMeeting.Y() );
+        }
+        aXP.Insert(XPOLY_APPEND,aP3,PolyFlags::Normal);
+        if (aP3.Y()!=rMeeting.Y()) {
+            aP3.setX(rMeeting.X() );
+            aXP.Insert(XPOLY_APPEND,aP3,PolyFlags::Normal);
+        }
+    }
+    if ((bObn && rMeeting.Y()>aP2.Y()) || (bUnt && rMeeting.Y()<aP2.Y())) { // around
+        if (rMeeting.X()<aP2.X()) {
+            aP3.setX(rRect.Left() );
+            if (rMeeting.X()<aP3.X()) aP3.setX(rMeeting.X() );
+        } else {
+            aP3.setX(rRect.Right() );
+            if (rMeeting.X()>aP3.X()) aP3.setX(rMeeting.X() );
+        }
+        aXP.Insert(XPOLY_APPEND,aP3,PolyFlags::Normal);
+        if (aP3.X()!=rMeeting.X()) {
+            aP3.setY(rMeeting.Y() );
+            aXP.Insert(XPOLY_APPEND,aP3,PolyFlags::Normal);
+        }
+    }
+#ifdef DBG_UTIL
+    if (aXP.GetPointCount()>4) {
+        OSL_FAIL("SdrEdgeObj::ImpCalcObjToCenter(): Polygon has more than 4 points!");
+    }
+#endif
+    return aXP;
+}
+
+XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const XPolygon& rTrack0, SdrObjConnection& rCon1, SdrObjConnection& rCon2, SdrEdgeInfoRec* pInfo) const
+{
+    Point aPt1,aPt2;
+    SdrGluePoint aGP1,aGP2;
+    SdrEscapeDirection nEsc1=SdrEscapeDirection::ALL,nEsc2=SdrEscapeDirection::ALL;
+    tools::Rectangle aBoundRect1;
+    tools::Rectangle aBoundRect2;
+    tools::Rectangle aBewareRect1;
+    tools::Rectangle aBewareRect2;
+    // first, get the old corner points
+    if (rTrack0.GetPointCount()!=0) {
+        aPt1=rTrack0[0];
+        sal_uInt16 nSiz=rTrack0.GetPointCount();
+        nSiz--;
+        aPt2=rTrack0[nSiz];
+    } else {
+        if (!aOutRect.IsEmpty()) {
+            aPt1=aOutRect.TopLeft();
+            aPt2=aOutRect.BottomRight();
+        }
+    }
+
+    // #i54102# To allow interactive preview, do also if not inserted
+    const bool bCon1(nullptr != rCon1.pObj && rCon1.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+    const bool bCon2(nullptr != rCon2.pObj && rCon2.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+    const SfxItemSet& rSet = GetObjectItemSet();
+
+    if (bCon1)
+    {
+        if (rCon1.pObj==static_cast<SdrObject const *>(this))
+        {
+            // check, just in case
+            aBoundRect1=aOutRect;
+        }
+        else
+        {
+            aBoundRect1 = rCon1.pObj->GetCurrentBoundRect();
+        }
+
+        aBoundRect1.Move(rCon1.aObjOfs.X(),rCon1.aObjOfs.Y());
+        aBewareRect1=aBoundRect1;
+        sal_Int32 nH = rSet.Get(SDRATTR_EDGENODE1HORZDIST).GetValue();
+        sal_Int32 nV = rSet.Get(SDRATTR_EDGENODE1VERTDIST).GetValue();
+        aBewareRect1.AdjustLeft( -nH );
+        aBewareRect1.AdjustRight(nH );
+        aBewareRect1.AdjustTop( -nV );
+        aBewareRect1.AdjustBottom(nV );
+    }
+    else
+    {
+        aBoundRect1=tools::Rectangle(aPt1,aPt1);
+        aBoundRect1.Move(rCon1.aObjOfs.X(),rCon1.aObjOfs.Y());
+        aBewareRect1=aBoundRect1;
+    }
+
+    if (bCon2)
+    {
+        if (rCon2.pObj==static_cast<SdrObject const *>(this))
+        { // check, just in case
+            aBoundRect2=aOutRect;
+        }
+        else
+        {
+            aBoundRect2 = rCon2.pObj->GetCurrentBoundRect();
+        }
+
+        aBoundRect2.Move(rCon2.aObjOfs.X(),rCon2.aObjOfs.Y());
+        aBewareRect2=aBoundRect2;
+        sal_Int32 nH = rSet.Get(SDRATTR_EDGENODE2HORZDIST).GetValue();
+        sal_Int32 nV = rSet.Get(SDRATTR_EDGENODE2VERTDIST).GetValue();
+        aBewareRect2.AdjustLeft( -nH );
+        aBewareRect2.AdjustRight(nH );
+        aBewareRect2.AdjustTop( -nV );
+        aBewareRect2.AdjustBottom(nV );
+    }
+    else
+    {
+        aBoundRect2=tools::Rectangle(aPt2,aPt2);
+        aBoundRect2.Move(rCon2.aObjOfs.X(),rCon2.aObjOfs.Y());
+        aBewareRect2=aBoundRect2;
+    }
+
+    XPolygon aBestXP;
+    sal_uIntPtr nBestQual=0xFFFFFFFF;
+    SdrEdgeInfoRec aBestInfo;
+    bool bAuto1=bCon1 && rCon1.bBestVertex;
+    bool bAuto2=bCon2 && rCon2.bBestVertex;
+    if (bAuto1) rCon1.bAutoVertex=true;
+    if (bAuto2) rCon2.bAutoVertex=true;
+    sal_uInt16 nBestAuto1=0;
+    sal_uInt16 nBestAuto2=0;
+    sal_uInt16 nCount1=bAuto1 ? 4 : 1;
+    sal_uInt16 nCount2=bAuto2 ? 4 : 1;
+
+    for (sal_uInt16 nNum1=0; nNum1<nCount1; nNum1++)
+    {
+        if (bAuto1) rCon1.nConId=nNum1;
+        if (bCon1 && rCon1.TakeGluePoint(aGP1))
+        {
+            aPt1=aGP1.GetPos();
+            nEsc1=aGP1.GetEscDir();
+            if (nEsc1==SdrEscapeDirection::SMART) nEsc1=ImpCalcEscAngle(rCon1.pObj,aPt1-rCon1.aObjOfs);
+        }
+        for (sal_uInt16 nNum2=0; nNum2<nCount2; nNum2++)
+        {
+            if (bAuto2) rCon2.nConId=nNum2;
+            if (bCon2 && rCon2.TakeGluePoint(aGP2))
+            {
+                aPt2=aGP2.GetPos();
+                nEsc2=aGP2.GetEscDir();
+                if (nEsc2==SdrEscapeDirection::SMART) nEsc2=ImpCalcEscAngle(rCon2.pObj,aPt2-rCon2.aObjOfs);
+            }
+            for (long nA1=0; nA1<36000; nA1+=9000)
+            {
+                SdrEscapeDirection nE1 = nA1==0 ? SdrEscapeDirection::RIGHT : nA1==9000 ? SdrEscapeDirection::TOP : nA1==18000 ? SdrEscapeDirection::LEFT : nA1==27000 ? SdrEscapeDirection::BOTTOM : SdrEscapeDirection::SMART;
+                for (long nA2=0; nA2<36000; nA2+=9000)
+                {
+                    SdrEscapeDirection nE2 = nA2==0 ? SdrEscapeDirection::RIGHT : nA2==9000 ? SdrEscapeDirection::TOP : nA2==18000 ? SdrEscapeDirection::LEFT : nA2==27000 ? SdrEscapeDirection::BOTTOM : SdrEscapeDirection::SMART;
+                    if ((nEsc1&nE1) && (nEsc2&nE2))
+                    {
+                        sal_uIntPtr nQual=0;
+                        SdrEdgeInfoRec aInfo;
+                        if (pInfo!=nullptr) aInfo=*pInfo;
+                        XPolygon aXP(ImpCalcEdgeTrack(aPt1,nA1,aBoundRect1,aBewareRect1,aPt2,nA2,aBoundRect2,aBewareRect2,&nQual,&aInfo));
+                        if (nQual<nBestQual)
+                        {
+                            aBestXP=aXP;
+                            nBestQual=nQual;
+                            aBestInfo=aInfo;
+                            nBestAuto1=nNum1;
+                            nBestAuto2=nNum2;
+                        }
+                    }
+                }
+            }
+        }
+    }
+    if (bAuto1) rCon1.nConId=nBestAuto1;
+    if (bAuto2) rCon2.nConId=nBestAuto2;
+    if (pInfo!=nullptr) *pInfo=aBestInfo;
+    return aBestXP;
+}
+
+XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const tools::Rectangle& rBoundRect1, const tools::Rectangle& rBewareRect1,
+    const Point& rPt2, long nAngle2, const tools::Rectangle& rBoundRect2, const tools::Rectangle& rBewareRect2,
+    sal_uIntPtr* pnQuality, SdrEdgeInfoRec* pInfo) const
+{
+    SdrEdgeKind eKind=GetObjectItem(SDRATTR_EDGEKIND).GetValue();
+    bool bRts1=nAngle1==0;
+    bool bObn1=nAngle1==9000;
+    bool bLks1=nAngle1==18000;
+    bool bUnt1=nAngle1==27000;
+    bool bHor1=bLks1 || bRts1;
+    bool bVer1=bObn1 || bUnt1;
+    bool bRts2=nAngle2==0;
+    bool bObn2=nAngle2==9000;
+    bool bLks2=nAngle2==18000;
+    bool bUnt2=nAngle2==27000;
+    bool bHor2=bLks2 || bRts2;
+    bool bVer2=bObn2 || bUnt2;
+    bool bInfo=pInfo!=nullptr;
+    if (bInfo) {
+        pInfo->nAngle1=nAngle1;
+        pInfo->nAngle2=nAngle2;
+        pInfo->nObj1Lines=1;
+        pInfo->nObj2Lines=1;
+        pInfo->nMiddleLine=0xFFFF;
+    }
+    Point aPt1(rPt1);
+    Point aPt2(rPt2);
+    tools::Rectangle aBoundRect1 (rBoundRect1 );
+    tools::Rectangle aBoundRect2 (rBoundRect2 );
+    tools::Rectangle aBewareRect1(rBewareRect1);
+    tools::Rectangle aBewareRect2(rBewareRect2);
+    Point aMeeting((aPt1.X()+aPt2.X()+1)/2,(aPt1.Y()+aPt2.Y()+1)/2);
+    if (eKind==SdrEdgeKind::OneLine) {
+        XPolygon aXP(2);
+        aXP[0]=rPt1;
+        aXP[1]=rPt2;
+        if (pnQuality!=nullptr) {
+            *pnQuality=std::abs(rPt1.X()-rPt2.X())+std::abs(rPt1.Y()-rPt2.Y());
+        }
+        return aXP;
+    } else if (eKind==SdrEdgeKind::ThreeLines) {
+        XPolygon aXP(4);
+        aXP[0]=rPt1;
+        aXP[1]=rPt1;
+        aXP[2]=rPt2;
+        aXP[3]=rPt2;
+        if (bRts1) aXP[1].setX(aBewareRect1.Right() );  //+=500;
+        if (bObn1) aXP[1].setY(aBewareRect1.Top() );    //-=500;
+        if (bLks1) aXP[1].setX(aBewareRect1.Left() );   //-=500;
+        if (bUnt1) aXP[1].setY(aBewareRect1.Bottom() ); //+=500;
+        if (bRts2) aXP[2].setX(aBewareRect2.Right() );  //+=500;
+        if (bObn2) aXP[2].setY(aBewareRect2.Top() );    //-=500;
+        if (bLks2) aXP[2].setX(aBewareRect2.Left() );   //-=500;
+        if (bUnt2) aXP[2].setY(aBewareRect2.Bottom() ); //+=500;
+        if (pnQuality!=nullptr) {
+            long nQ=std::abs(aXP[1].X()-aXP[0].X())+std::abs(aXP[1].Y()-aXP[0].Y());
+            nQ+=std::abs(aXP[2].X()-aXP[1].X())+std::abs(aXP[2].Y()-aXP[1].Y());
+            nQ+=std::abs(aXP[3].X()-aXP[2].X())+std::abs(aXP[3].Y()-aXP[2].Y());
+            *pnQuality=nQ;
+        }
+        if (bInfo) {
+            pInfo->nObj1Lines=2;
+            pInfo->nObj2Lines=2;
+            if (bHor1) {
+                aXP[1].AdjustX(pInfo->aObj1Line2.X() );
+            } else {
+                aXP[1].AdjustY(pInfo->aObj1Line2.Y() );
+            }
+            if (bHor2) {
+                aXP[2].AdjustX(pInfo->aObj2Line2.X() );
+            } else {
+                aXP[2].AdjustY(pInfo->aObj2Line2.Y() );
+            }
+        }
+        return aXP;
+    }
+    sal_uInt16 nIntersections=0;
+    {
+        Point aC1(aBewareRect1.Center());
+        Point aC2(aBewareRect2.Center());
+        if (aBewareRect1.Left()<=aBewareRect2.Right() && aBewareRect1.Right()>=aBewareRect2.Left()) {
+            // overlapping on the x axis
+            long n1=std::max(aBewareRect1.Left(),aBewareRect2.Left());
+            long n2=std::min(aBewareRect1.Right(),aBewareRect2.Right());
+            aMeeting.setX((n1+n2+1)/2 );
+        } else {
+            // otherwise the center point of the empty space
+            if (aC1.X()<aC2.X()) {
+                aMeeting.setX((aBewareRect1.Right()+aBewareRect2.Left()+1)/2 );
+            } else {
+                aMeeting.setX((aBewareRect1.Left()+aBewareRect2.Right()+1)/2 );
+            }
+        }
+        if (aBewareRect1.Top()<=aBewareRect2.Bottom() && aBewareRect1.Bottom()>=aBewareRect2.Top()) {
+            // overlapping on the x axis
+            long n1=std::max(aBewareRect1.Top(),aBewareRect2.Top());
+            long n2=std::min(aBewareRect1.Bottom(),aBewareRect2.Bottom());
+            aMeeting.setY((n1+n2+1)/2 );
+        } else {
+            // otherwise the center point of the empty space
+            if (aC1.Y()<aC2.Y()) {
+                aMeeting.setY((aBewareRect1.Bottom()+aBewareRect2.Top()+1)/2 );
+            } else {
+                aMeeting.setY((aBewareRect1.Top()+aBewareRect2.Bottom()+1)/2 );
+            }
+        }
+        // Here, there are three cases:
+        //   1. both go into the same direction
+        //   2. both go into opposite directions
+        //   3. one is vertical, the other is horizontal
+        long nXMin=std::min(aBewareRect1.Left(),aBewareRect2.Left());
+        long nXMax=std::max(aBewareRect1.Right(),aBewareRect2.Right());
+        long nYMin=std::min(aBewareRect1.Top(),aBewareRect2.Top());
+        long nYMax=std::max(aBewareRect1.Bottom(),aBewareRect2.Bottom());
+        bool bBewareOverlap=aBewareRect1.Right()>aBewareRect2.Left() && aBewareRect1.Left()<aBewareRect2.Right() &&
+                            aBewareRect1.Bottom()>aBewareRect2.Top() && aBewareRect1.Top()<aBewareRect2.Bottom();
+        unsigned nMainCase=3;
+        if (nAngle1==nAngle2) nMainCase=1;
+        else if ((bHor1 && bHor2) || (bVer1 && bVer2)) nMainCase=2;
+        if (nMainCase==1) { // case 1 (both go in one direction) is possible
+            if (bVer1) aMeeting.setX((aPt1.X()+aPt2.X()+1)/2 ); // Here, this is better than
+            if (bHor1) aMeeting.setY((aPt1.Y()+aPt2.Y()+1)/2 ); // using center point of empty space
+            // bX1Ok means that the vertical exiting Obj1 doesn't conflict with Obj2, ...
+            bool bX1Ok=aPt1.X()<=aBewareRect2.Left() || aPt1.X()>=aBewareRect2.Right();
+            bool bX2Ok=aPt2.X()<=aBewareRect1.Left() || aPt2.X()>=aBewareRect1.Right();
+            bool bY1Ok=aPt1.Y()<=aBewareRect2.Top() || aPt1.Y()>=aBewareRect2.Bottom();
+            bool bY2Ok=aPt2.Y()<=aBewareRect1.Top() || aPt2.Y()>=aBewareRect1.Bottom();
+            if (bLks1 && (bY1Ok || aBewareRect1.Left()<aBewareRect2.Right()) && (bY2Ok || aBewareRect2.Left()<aBewareRect1.Right())) {
+                aMeeting.setX(nXMin );
+            }
+            if (bRts1 && (bY1Ok || aBewareRect1.Right()>aBewareRect2.Left()) && (bY2Ok || aBewareRect2.Right()>aBewareRect1.Left())) {
+                aMeeting.setX(nXMax );
+            }
+            if (bObn1 && (bX1Ok || aBewareRect1.Top()<aBewareRect2.Bottom()) && (bX2Ok || aBewareRect2.Top()<aBewareRect1.Bottom())) {
+                aMeeting.setY(nYMin );
+            }
+            if (bUnt1 && (bX1Ok || aBewareRect1.Bottom()>aBewareRect2.Top()) && (bX2Ok || aBewareRect2.Bottom()>aBewareRect1.Top())) {
+                aMeeting.setY(nYMax );
+            }
+        } else if (nMainCase==2) {
+            // case 2:
+            if (bHor1) { // both horizontal
+                /* 9 sub-cases:
+               (legend: line exits to the left (-|), right (|-))
+
+                    2.1: Facing; overlap only on y axis
+                         *  *  *
+                         |--|  *
+                         *  *  *
+
+                    2.2, 2.3: Facing, offset vertically; no overlap on either
+                             axis
+                         |- *  *       *  *  *
+                         * -|  *       * -|  *
+                         *  *  *  ,    *  *  *
+
+                    2.4, 2.5: One below the other; overlap only on y axis
+                         *  |- *       *  *  *
+                         * -|  *       * -|  *
+                         *  *  *  ,    *  |- *
+
+                    2.6, 2.7: Not facing, offset vertically; no overlap on either
+                             axis
+                         *  *  |-      *  *  *
+                         * -|  *       * -|  *
+                         *  *  *  ,    *  *  |-
+
+                    2.8: Not facing; overlap only on y axis
+                         *  *  *
+                         * -|  |-
+                         *  *  *
+
+                    2.9: The objects's BewareRects overlap on x and y axis
+
+                   These cases, with some modifications are also valid for
+                   horizontal line exits.
+                   Cases 2.1 through 2.7 are covered well enough with the
+                   default meetings. Only for cases 2.8 and 2.9 do we determine
+                   special meeting points here.
+                */
+
+                // normalization; be aR1 the one exiting to the right,
+                // be aR2 the one exiting to the left
+                tools::Rectangle aBewR1(bRts1 ? aBewareRect1 : aBewareRect2);
+                tools::Rectangle aBewR2(bRts1 ? aBewareRect2 : aBewareRect1);
+                tools::Rectangle aBndR1(bRts1 ? aBoundRect1 : aBoundRect2);
+                tools::Rectangle aBndR2(bRts1 ? aBoundRect2 : aBoundRect1);
+                if (aBewR1.Bottom()>aBewR2.Top() && aBewR1.Top()<aBewR2.Bottom()) {
+                    // overlap on y axis; cases 2.1, 2.8, 2.9
+                    if (aBewR1.Right()>aBewR2.Left()) {
+                        /* Cases 2.8, 2.9:
+                             Case 2.8: always going around on the outside
+                             (bDirect=false).
+
+                             Case 2.9 could also be a direct connection (in the
+                             case that the BewareRects overlap only slightly and
+                             the BoundRects don't overlap at all and if the
+                             line exits would otherwise violate the respective
+                             other object's BewareRect).
+                        */
+                        bool bCase29Direct = false;
+                        bool bCase29=aBewR1.Right()>aBewR2.Left();
+                        if (aBndR1.Right()<=aBndR2.Left()) { // case 2.9 without BoundRect overlap
+                            if ((aPt1.Y()>aBewareRect2.Top() && aPt1.Y()<aBewareRect2.Bottom()) ||
+                                (aPt2.Y()>aBewareRect1.Top() && aPt2.Y()<aBewareRect1.Bottom())) {
+                               bCase29Direct = true;
+                            }
+                        }
+                        if (!bCase29Direct) {
+                            bool bObenLang=std::abs(nYMin-aMeeting.Y())<=std::abs(nYMax-aMeeting.Y());
+                            if (bObenLang) {
+                                aMeeting.setY(nYMin );
+                            } else {
+                                aMeeting.setY(nYMax );
+                            }
+                            if (bCase29) {
+                                // now make sure that the surrounded object
+                                // isn't traversed
+                                if ((aBewR1.Center().Y()<aBewR2.Center().Y()) != bObenLang) {
+                                    aMeeting.setX(aBewR2.Right() );
+                                } else {
+                                    aMeeting.setX(aBewR1.Left() );
+                                }
+                            }
+                        } else {
+                            // We need a direct connection (3-line Z connection),
+                            // because we have to violate the BewareRects.
+                            // Use rule of three to scale down the BewareRects.
+                            long nWant1=aBewR1.Right()-aBndR1.Right(); // distance at Obj1
+                            long nWant2=aBndR2.Left()-aBewR2.Left();   // distance at Obj2
+                            long nSpace=aBndR2.Left()-aBndR1.Right(); // available space
+                            long nGet1=BigMulDiv(nWant1,nSpace,nWant1+nWant2);
+                            long nGet2=nSpace-nGet1;
+                            if (bRts1) { // revert normalization
+                                aBewareRect1.AdjustRight(nGet1-nWant1 );
+                                aBewareRect2.AdjustLeft( -(nGet2-nWant2) );
+                            } else {
+                                aBewareRect2.AdjustRight(nGet1-nWant1 );
+                                aBewareRect1.AdjustLeft( -(nGet2-nWant2) );
+                            }
+                            nIntersections++; // lower quality
+                        }
+                    }
+                }
+            } else if (bVer1) { // both horizontal
+                tools::Rectangle aBewR1(bUnt1 ? aBewareRect1 : aBewareRect2);
+                tools::Rectangle aBewR2(bUnt1 ? aBewareRect2 : aBewareRect1);
+                tools::Rectangle aBndR1(bUnt1 ? aBoundRect1 : aBoundRect2);
+                tools::Rectangle aBndR2(bUnt1 ? aBoundRect2 : aBoundRect1);
+                if (aBewR1.Right()>aBewR2.Left() && aBewR1.Left()<aBewR2.Right()) {
+                    // overlap on y axis; cases 2.1, 2.8, 2.9
+                    if (aBewR1.Bottom()>aBewR2.Top()) {
+                        /* Cases 2.8, 2.9
+                           Case 2.8 always going around on the outside (bDirect=false).
+
+                           Case 2.9 could also be a direct connection (in the
+                           case that the BewareRects overlap only slightly and
+                           the BoundRects don't overlap at all and if the
+                           line exits would otherwise violate the respective
+                           other object's BewareRect).
+                        */
+                        bool bCase29Direct = false;
+                        bool bCase29=aBewR1.Bottom()>aBewR2.Top();
+                        if (aBndR1.Bottom()<=aBndR2.Top()) { // case 2.9 without BoundRect overlap
+                            if ((aPt1.X()>aBewareRect2.Left() && aPt1.X()<aBewareRect2.Right()) ||
+                                (aPt2.X()>aBewareRect1.Left() && aPt2.X()<aBewareRect1.Right())) {
+                               bCase29Direct = true;
+                            }
+                        }
+                        if (!bCase29Direct) {
+                            bool bLinksLang=std::abs(nXMin-aMeeting.X())<=std::abs(nXMax-aMeeting.X());
+                            if (bLinksLang) {
+                                aMeeting.setX(nXMin );
+                            } else {
+                                aMeeting.setX(nXMax );
+                            }
+                            if (bCase29) {
+                                // now make sure that the surrounded object
+                                // isn't traversed
+                                if ((aBewR1.Center().X()<aBewR2.Center().X()) != bLinksLang) {
+                                    aMeeting.setY(aBewR2.Bottom() );
+                                } else {
+                                    aMeeting.setY(aBewR1.Top() );
+                                }
+                            }
+                        } else {
+                            // We need a direct connection (3-line Z connection),
+                            // because we have to violate the BewareRects.
+                            // Use rule of three to scale down the BewareRects.
+                            long nWant1=aBewR1.Bottom()-aBndR1.Bottom(); // difference at Obj1
+                            long nWant2=aBndR2.Top()-aBewR2.Top();   // difference at Obj2
+                            long nSpace=aBndR2.Top()-aBndR1.Bottom(); // available space
+                            long nGet1=BigMulDiv(nWant1,nSpace,nWant1+nWant2);
+                            long nGet2=nSpace-nGet1;
+                            if (bUnt1) { // revert normalization
+                                aBewareRect1.AdjustBottom(nGet1-nWant1 );
+                                aBewareRect2.AdjustTop( -(nGet2-nWant2) );
+                            } else {
+                                aBewareRect2.AdjustBottom(nGet1-nWant1 );
+                                aBewareRect1.AdjustTop( -(nGet2-nWant2) );
+                            }
+                            nIntersections++; // lower quality
+                        }
+                    }
+                }
+            }
+        } else if (nMainCase==3) { // case 3: one horizontal, the other vertical
+            /* legend:
+               The line exits to the:
+               -|       left
+
+                |-      right
+
+               _|_      top
+
+                T       bottom
+
+               *  .  *  .  * -- no overlap, at most might touch
+               .  .  .  .  . -- overlap
+               *  .  |- .  * -- same height
+               .  .  .  .  . -- overlap
+               *  .  *  .  * -- no overlap, at most might touch
+
+               Overall, there are 96 possible constellations, some of these can't even
+               be unambiguously assigned to a certain case/method of handling.
+
+
+               3.1: All those constellations that are covered reasonably well
+               by the default MeetingPoint (20+12).
+
+               T  T  T  . _|_    _|_ .  T  T  T     these 12     *  .  *  T  *      *  .  *  .  *      *  T  *  .  *      *  .  *  .  *
+               .  .  .  . _|_    _|_ .  .  .  .  constellations  .  .  .  .  .      .  .  .  .  T      .  .  .  .  .      T  .  .  .  .
+               *  .  |- .  *      *  . -|  .  *   are covered    *  .  |- . _|_     *  .  |- .  T     _|_ . -|  .  *      T  . -|  .  *
+               .  .  .  .  T      T  .  .  .  .     only in      .  .  .  . _|_     .  .  .  .  .     _|_ .  .  .  .      .  .  .  .  .
+              _|__|__|_ .  T      T  . _|__|__|_     part:       *  .  * _|_ *      *  .  *  .  *      * _|_ *  .  *      *  .  *  .  *
+
+              The last 16 of these cases can be excluded, if the objects face each other openly.
+
+
+              3.2: The objects face each other openly, thus a connection using only two lines is possible (4+20);
+              This case is priority #1.
+               *  .  *  .  T      T  .  *  .  *     these 20     *  .  *  T  *      *  T  *  .  *      *  .  *  .  *      *  .  *  .  *
+               .  .  .  .  .      .  .  .  .  .  constellations  .  .  .  T  T      T  T  .  .  .      .  .  .  .  .      .  .  .  .  .
+               *  .  |- .  *      *  . -|  .  *    are covered   *  .  |-_|__|_    _|__|_-|  .  *      *  .  |- T  T      T  T -|  .  *
+               .  .  .  .  .      .  .  .  .  .     only in      .  .  . _|__|_    _|__|_ .  .  .      .  .  .  .  .      .  .  .  .  .
+               *  .  *  . _|_    _|_ .  *  .  *      part:       *  .  * _|_ *      * _|_ *  .  *      *  .  *  .  *      *  .  *  .  *
+
+               3.3: The line exits point away from the other object or miss its back (52+4).
+              _|__|__|__|_ *      * _|__|__|__|_     *  .  .  .  *      *  .  *  .  *     these 4      *  .  *  .  *      *  .  *  .  *
+              _|__|__|__|_ .      . _|__|__|__|_     T  T  T  .  .      .  .  T  T  T  constellations  .  .  .  T  .      .  T  .  .  .
+              _|__|_ |- .  *      *  . -| _|__|_     T  T  |- .  *      *  . -|  T  T    are covered   *  .  |- .  *      *  . -|  .  *
+              _|__|__|_ .  .      .  . _|__|__|_     T  T  T  T  .      .  T  T  T  T     only in      .  .  . _|_ .      . _|_ .  .  .
+               *  .  *  .  *      *  .  *  .  *      T  T  T  T  *      *  T  T  T  T      part:       *  .  *  .  *      *  .  *  .  *
+            */
+
+            // case 3.2
+            tools::Rectangle aTmpR1(aBewareRect1);
+            tools::Rectangle aTmpR2(aBewareRect2);
+            if (bBewareOverlap) {
+                // overlapping BewareRects: use BoundRects for checking for case 3.2
+                aTmpR1=aBoundRect1;
+                aTmpR2=aBoundRect2;
+            }
+            if ((((bRts1 && aTmpR1.Right ()<=aPt2.X()) || (bLks1 && aTmpR1.Left()>=aPt2.X())) &&
+                 ((bUnt2 && aTmpR2.Bottom()<=aPt1.Y()) || (bObn2 && aTmpR2.Top ()>=aPt1.Y()))) ||
+                (((bRts2 && aTmpR2.Right ()<=aPt1.X()) || (bLks2 && aTmpR2.Left()>=aPt1.X())) &&
+                 ((bUnt1 && aTmpR1.Bottom()<=aPt2.Y()) || (bObn1 && aTmpR1.Top ()>=aPt2.Y())))) {
+                // case 3.2 applies: connector with only 2 lines
+                if (bHor1) {
+                    aMeeting.setX(aPt2.X() );
+                    aMeeting.setY(aPt1.Y() );
+                } else {
+                    aMeeting.setX(aPt1.X() );
+                    aMeeting.setY(aPt2.Y() );
+                }
+                // in the case of overlapping BewareRects:
+                aBewareRect1=aTmpR1;
+                aBewareRect2=aTmpR2;
+            } else if ((((bRts1 && aBewareRect1.Right ()>aBewareRect2.Left  ()) ||
+                         (bLks1 && aBewareRect1.Left  ()<aBewareRect2.Right ())) &&
+                        ((bUnt2 && aBewareRect2.Bottom()>aBewareRect1.Top   ()) ||
+                         (bObn2 && aBewareRect2.Top   ()<aBewareRect1.Bottom()))) ||
+                       (((bRts2 && aBewareRect2.Right ()>aBewareRect1.Left  ()) ||
+                         (bLks2 && aBewareRect2.Left  ()<aBewareRect1.Right ())) &&
+                        ((bUnt1 && aBewareRect1.Bottom()>aBewareRect2.Top   ()) ||
+                         (bObn1 && aBewareRect1.Top   ()<aBewareRect2.Bottom())))) {
+                // case 3.3
+                if (bRts1 || bRts2) { aMeeting.setX(nXMax ); }
+                if (bLks1 || bLks2) { aMeeting.setX(nXMin ); }
+                if (bUnt1 || bUnt2) { aMeeting.setY(nYMax ); }
+                if (bObn1 || bObn2) { aMeeting.setY(nYMin ); }
+            }
+        }
+    }
+
+    XPolygon aXP1(ImpCalcObjToCenter(aPt1,nAngle1,aBewareRect1,aMeeting));
+    XPolygon aXP2(ImpCalcObjToCenter(aPt2,nAngle2,aBewareRect2,aMeeting));
+    sal_uInt16 nXP1Cnt=aXP1.GetPointCount();
+    sal_uInt16 nXP2Cnt=aXP2.GetPointCount();
+    if (bInfo) {
+        pInfo->nObj1Lines=nXP1Cnt; if (nXP1Cnt>1) pInfo->nObj1Lines--;
+        pInfo->nObj2Lines=nXP2Cnt; if (nXP2Cnt>1) pInfo->nObj2Lines--;
+    }
+    Point aEP1(aXP1[nXP1Cnt-1]);
+    Point aEP2(aXP2[nXP2Cnt-1]);
+    bool bInsMeetingPoint=aEP1.X()!=aEP2.X() && aEP1.Y()!=aEP2.Y();
+    bool bHorzE1=aEP1.Y()==aXP1[nXP1Cnt-2].Y(); // is last line of XP1 horizontal?
+    bool bHorzE2=aEP2.Y()==aXP2[nXP2Cnt-2].Y(); // is last line of XP2 horizontal?
+    if (aEP1==aEP2 && ((bHorzE1 && bHorzE2 && aEP1.Y()==aEP2.Y()) || (!bHorzE1 && !bHorzE2 && aEP1.X()==aEP2.X()))) {
+        // special casing 'I' connectors
+        nXP1Cnt--; aXP1.Remove(nXP1Cnt,1);
+        nXP2Cnt--; aXP2.Remove(nXP2Cnt,1);
+    }
+    if (bInsMeetingPoint) {
+        aXP1.Insert(XPOLY_APPEND,aMeeting,PolyFlags::Normal);
+        if (bInfo) {
+            // Inserting a MeetingPoint adds 2 new lines,
+            // either might become the center line.
+            if (pInfo->nObj1Lines==pInfo->nObj2Lines) {
+                pInfo->nObj1Lines++;
+                pInfo->nObj2Lines++;
+            } else {
+                if (pInfo->nObj1Lines>pInfo->nObj2Lines) {
+                    pInfo->nObj2Lines++;
+                    pInfo->nMiddleLine=nXP1Cnt-1;
+                } else {
+                    pInfo->nObj1Lines++;
+                    pInfo->nMiddleLine=nXP1Cnt;
+                }
+            }
+        }
+    } else if (bInfo && aEP1!=aEP2 && nXP1Cnt+nXP2Cnt>=4) {
+        // By connecting both ends, another line is added, this becomes the center line.
+        pInfo->nMiddleLine=nXP1Cnt-1;
+    }
+    sal_uInt16 nNum=aXP2.GetPointCount();
+    if (aXP1[nXP1Cnt-1]==aXP2[nXP2Cnt-1] && nXP1Cnt>1 && nXP2Cnt>1) nNum--;
+    while (nNum>0) {
+        nNum--;
+        aXP1.Insert(XPOLY_APPEND,aXP2[nNum],PolyFlags::Normal);
+    }
+    sal_uInt16 nPointCount=aXP1.GetPointCount();
+    char cForm;
+    if (bInfo || pnQuality!=nullptr) {
+        if (nPointCount==2) cForm='I';
+        else if (nPointCount==3) cForm='L';
+        else if (nPointCount==4) { // Z or U
+            if (nAngle1==nAngle2) cForm='U';
+            else cForm='Z';
+        } else if (nPointCount==6) { // S or C or ...
+            if (nAngle1!=nAngle2) {
+                // For type S, line 2 has the same direction as line 4.
+                // For type C, the opposite is true.
+                Point aP1(aXP1[1]);
+                Point aP2(aXP1[2]);
+                Point aP3(aXP1[3]);
+                Point aP4(aXP1[4]);
+                if (aP1.Y()==aP2.Y()) { // else both lines are horizontal
+                    if ((aP1.X()<aP2.X())==(aP3.X()<aP4.X())) cForm='S';
+                    else cForm='C';
+                } else { // else both lines are vertical
+                    if ((aP1.Y()<aP2.Y())==(aP3.Y()<aP4.Y())) cForm='S';
+                    else cForm='C';
+                }
+            } else cForm='4'; // else is case 3 with 5 lines
+        } else cForm='?';
+        // more shapes:
+        if (bInfo) {
+            if (cForm=='I' || cForm=='L' || cForm=='Z' || cForm=='U') {
+                pInfo->nObj1Lines=1;
+                pInfo->nObj2Lines=1;
+                if (cForm=='Z' || cForm=='U') {
+                    pInfo->nMiddleLine=1;
+                } else {
+                    pInfo->nMiddleLine=0xFFFF;
+                }
+            } else if (cForm=='S' || cForm=='C') {
+                pInfo->nObj1Lines=2;
+                pInfo->nObj2Lines=2;
+                pInfo->nMiddleLine=2;
+            }
+        }
+    }
+    else
+    {
+        cForm = 0;
+    }
+    if (pnQuality!=nullptr) {
+        sal_uIntPtr nQual=0;
+        sal_uIntPtr nQual0=nQual; // prevent overruns
+        bool bOverflow = false;
+        Point aPt0(aXP1[0]);
+        for (sal_uInt16 nPntNum=1; nPntNum<nPointCount; nPntNum++) {
+            Point aPt1b(aXP1[nPntNum]);
+            nQual+=std::abs(aPt1b.X()-aPt0.X())+std::abs(aPt1b.Y()-aPt0.Y());
+            if (nQual<nQual0) bOverflow = true;
+            nQual0=nQual;
+            aPt0=aPt1b;
+        }
+
+        sal_uInt16 nTmp=nPointCount;
+        if (cForm=='Z') {
+            nTmp=2; // Z shape with good quality (nTmp=2 instead of 4)
+            sal_uIntPtr n1=std::abs(aXP1[1].X()-aXP1[0].X())+std::abs(aXP1[1].Y()-aXP1[0].Y());
+            sal_uIntPtr n2=std::abs(aXP1[2].X()-aXP1[1].X())+std::abs(aXP1[2].Y()-aXP1[1].Y());
+            sal_uIntPtr n3=std::abs(aXP1[3].X()-aXP1[2].X())+std::abs(aXP1[3].Y()-aXP1[2].Y());
+            // try to make lines lengths similar
+            sal_uIntPtr nBesser=0;
+            n1+=n3;
+            n3=n2/4;
+            if (n1>=n2) nBesser=6;
+            else if (n1>=3*n3) nBesser=4;
+            else if (n1>=2*n3) nBesser=2;
+            if (aXP1[0].Y()!=aXP1[1].Y()) nBesser++; // vertical starting line gets a plus (for H/V-Prio)
+            if (nQual>nBesser) nQual-=nBesser; else nQual=0;
+        }
+        if (nTmp>=3) {
+            nQual0=nQual;
+            nQual+=static_cast<sal_uIntPtr>(nTmp)*0x01000000;
+            if (nQual<nQual0 || nTmp>15) bOverflow = true;
+        }
+        if (nPointCount>=2) { // check exit angle again
+            Point aP1(aXP1[1]); aP1-=aXP1[0];
+            Point aP2(aXP1[nPointCount-2]); aP2-=aXP1[nPointCount-1];
+            long nAng1=0; if (aP1.X()<0) nAng1=18000; if (aP1.Y()>0) nAng1=27000;
+            if (aP1.Y()<0) nAng1=9000;
+            if (aP1.X()!=0 && aP1.Y()!=0) nAng1=1; // slant?!
+            long nAng2=0; if (aP2.X()<0) nAng2=18000; if (aP2.Y()>0) nAng2=27000;
+            if (aP2.Y()<0) nAng2=9000;
+            if (aP2.X()!=0 && aP2.Y()!=0) nAng2=1; // slant?!
+            if (nAng1!=nAngle1) nIntersections++;
+            if (nAng2!=nAngle2) nIntersections++;
+        }
+
+        // For the quality check, use the original Rects and at the same time
+        // check whether one them was scaled down for the calculation of the
+        // Edges (e. g. case 2.9)
+        aBewareRect1=rBewareRect1;
+        aBewareRect2=rBewareRect2;
+
+        for (sal_uInt16 i=0; i<nPointCount; i++) {
+            Point aPt1b(aXP1[i]);
+            bool b1=aPt1b.X()>aBewareRect1.Left() && aPt1b.X()<aBewareRect1.Right() &&
+                        aPt1b.Y()>aBewareRect1.Top() && aPt1b.Y()<aBewareRect1.Bottom();
+            bool b2=aPt1b.X()>aBewareRect2.Left() && aPt1b.X()<aBewareRect2.Right() &&
+                        aPt1b.Y()>aBewareRect2.Top() && aPt1b.Y()<aBewareRect2.Bottom();
+            sal_uInt16 nInt0=nIntersections;
+            if (i==0 || i==nPointCount-1) {
+                if (b1 && b2) nIntersections++;
+            } else {
+                if (b1) nIntersections++;
+                if (b2) nIntersections++;
+            }
+            // check for overlaps
+            if (i>0 && nInt0==nIntersections) {
+                if (aPt0.Y()==aPt1b.Y()) { // horizontal line
+                    if (aPt0.Y()>aBewareRect1.Top() && aPt0.Y()<aBewareRect1.Bottom() &&
+                        ((aPt0.X()<=aBewareRect1.Left() && aPt1b.X()>=aBewareRect1.Right()) ||
+                         (aPt1b.X()<=aBewareRect1.Left() && aPt0.X()>=aBewareRect1.Right()))) nIntersections++;
+                    if (aPt0.Y()>aBewareRect2.Top() && aPt0.Y()<aBewareRect2.Bottom() &&
+                        ((aPt0.X()<=aBewareRect2.Left() && aPt1b.X()>=aBewareRect2.Right()) ||
+                         (aPt1b.X()<=aBewareRect2.Left() && aPt0.X()>=aBewareRect2.Right()))) nIntersections++;
+                } else { // vertical line
+                    if (aPt0.X()>aBewareRect1.Left() && aPt0.X()<aBewareRect1.Right() &&
+                        ((aPt0.Y()<=aBewareRect1.Top() && aPt1b.Y()>=aBewareRect1.Bottom()) ||
+                         (aPt1b.Y()<=aBewareRect1.Top() && aPt0.Y()>=aBewareRect1.Bottom()))) nIntersections++;
+                    if (aPt0.X()>aBewareRect2.Left() && aPt0.X()<aBewareRect2.Right() &&
+                        ((aPt0.Y()<=aBewareRect2.Top() && aPt1b.Y()>=aBewareRect2.Bottom()) ||
+                         (aPt1b.Y()<=aBewareRect2.Top() && aPt0.Y()>=aBewareRect2.Bottom()))) nIntersections++;
+                }
+            }
+            aPt0=aPt1b;
+        }
+        if (nPointCount<=1) nIntersections++;
+        nQual0=nQual;
+        nQual+=static_cast<sal_uIntPtr>(nIntersections)*0x10000000;
+        if (nQual<nQual0 || nIntersections>15) bOverflow = true;
+
+        if (bOverflow || nQual==0xFFFFFFFF) nQual=0xFFFFFFFE;
+        *pnQuality=nQual;
+    }
+    if (bInfo) { // now apply line offsets to aXP1
+        if (pInfo->nMiddleLine!=0xFFFF) {
+            sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::MiddleLine,aXP1);
+            if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::MiddleLine,aXP1)) {
+                aXP1[nIdx].AdjustY(pInfo->aMiddleLine.Y() );
+                aXP1[nIdx+1].AdjustY(pInfo->aMiddleLine.Y() );
+            } else {
+                aXP1[nIdx].AdjustX(pInfo->aMiddleLine.X() );
+                aXP1[nIdx+1].AdjustX(pInfo->aMiddleLine.X() );
+            }
+        }
+        if (pInfo->nObj1Lines>=2) {
+            sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj1Line2,aXP1);
+            if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj1Line2,aXP1)) {
+                aXP1[nIdx].AdjustY(pInfo->aObj1Line2.Y() );
+                aXP1[nIdx+1].AdjustY(pInfo->aObj1Line2.Y() );
+            } else {
+                aXP1[nIdx].AdjustX(pInfo->aObj1Line2.X() );
+                aXP1[nIdx+1].AdjustX(pInfo->aObj1Line2.X() );
+            }
+        }
+        if (pInfo->nObj1Lines>=3) {
+            sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj1Line3,aXP1);
+            if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj1Line3,aXP1)) {
+                aXP1[nIdx].AdjustY(pInfo->aObj1Line3.Y() );
+                aXP1[nIdx+1].AdjustY(pInfo->aObj1Line3.Y() );
+            } else {
+                aXP1[nIdx].AdjustX(pInfo->aObj1Line3.X() );
+                aXP1[nIdx+1].AdjustX(pInfo->aObj1Line3.X() );
+            }
+        }
+        if (pInfo->nObj2Lines>=2) {
+            sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj2Line2,aXP1);
+            if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj2Line2,aXP1)) {
+                aXP1[nIdx].AdjustY(pInfo->aObj2Line2.Y() );
+                aXP1[nIdx+1].AdjustY(pInfo->aObj2Line2.Y() );
+            } else {
+                aXP1[nIdx].AdjustX(pInfo->aObj2Line2.X() );
+                aXP1[nIdx+1].AdjustX(pInfo->aObj2Line2.X() );
+            }
+        }
+        if (pInfo->nObj2Lines>=3) {
+            sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj2Line3,aXP1);
+            if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj2Line3,aXP1)) {
+                aXP1[nIdx].AdjustY(pInfo->aObj2Line3.Y() );
+                aXP1[nIdx+1].AdjustY(pInfo->aObj2Line3.Y() );
+            } else {
+                aXP1[nIdx].AdjustX(pInfo->aObj2Line3.X() );
+                aXP1[nIdx+1].AdjustX(pInfo->aObj2Line3.X() );
+            }
+        }
+    }
+    // make the connector a bezier curve, if appropriate
+    if (eKind==SdrEdgeKind::Bezier && nPointCount>2) {
+        Point* pPt1=&aXP1[0];
+        Point* pPt2=&aXP1[1];
+        Point* pPt3=&aXP1[nPointCount-2];
+        Point* pPt4=&aXP1[nPointCount-1];
+        long dx1=pPt2->X()-pPt1->X();
+        long dy1=pPt2->Y()-pPt1->Y();
+        long dx2=pPt3->X()-pPt4->X();
+        long dy2=pPt3->Y()-pPt4->Y();
+        if (cForm=='L') { // nPointCount==3
+            aXP1.SetFlags(1,PolyFlags::Control);
+            Point aPt3(*pPt2);
+            aXP1.Insert(2,aPt3,PolyFlags::Control);
+            nPointCount=aXP1.GetPointCount();
+            pPt2=&aXP1[1];
+            pPt3=&aXP1[nPointCount-2];
+            pPt2->AdjustX( -(dx1/3) );
+            pPt2->AdjustY( -(dy1/3) );
+            pPt3->AdjustX( -(dx2/3) );
+            pPt3->AdjustY( -(dy2/3) );
+        } else if (nPointCount>=4 && nPointCount<=6) { // Z or U or ...
+            // To all others, the end points of the original lines become control
+            // points for now. Thus, we need to do some more work for nPointCount>4!
+            aXP1.SetFlags(1,PolyFlags::Control);
+            aXP1.SetFlags(nPointCount-2,PolyFlags::Control);
+            // distance x1.5
+            pPt2->AdjustX(dx1/2 );
+            pPt2->AdjustY(dy1/2 );
+            pPt3->AdjustX(dx2/2 );
+            pPt3->AdjustY(dy2/2 );
+            if (nPointCount==5) {
+                // add a control point before and after center
+                Point aCenter(aXP1[2]);
+                long dx1b=aCenter.X()-aXP1[1].X();
+                long dy1b=aCenter.Y()-aXP1[1].Y();
+                long dx2b=aCenter.X()-aXP1[3].X();
+                long dy2b=aCenter.Y()-aXP1[3].Y();
+                aXP1.Insert(2,aCenter,PolyFlags::Control);
+                aXP1.SetFlags(3,PolyFlags::Symmetric);
+                aXP1.Insert(4,aCenter,PolyFlags::Control);
+                aXP1[2].AdjustX( -(dx1b/2) );
+                aXP1[2].AdjustY( -(dy1b/2) );
+                aXP1[3].AdjustX( -((dx1b+dx2b)/4) );
+                aXP1[3].AdjustY( -((dy1b+dy2b)/4) );
+                aXP1[4].AdjustX( -(dx2b/2) );
+                aXP1[4].AdjustY( -(dy2b/2) );
+            }
+            if (nPointCount==6) {
+                Point aPt1b(aXP1[2]);
+                Point aPt2b(aXP1[3]);
+                aXP1.Insert(2,aPt1b,PolyFlags::Control);
+                aXP1.Insert(5,aPt2b,PolyFlags::Control);
+                long dx=aPt1b.X()-aPt2b.X();
+                long dy=aPt1b.Y()-aPt2b.Y();
+                aXP1[3].AdjustX( -(dx/2) );
+                aXP1[3].AdjustY( -(dy/2) );
+                aXP1.SetFlags(3,PolyFlags::Symmetric);
+                aXP1.Remove(4,1); // because it's identical with aXP1[3]
+            }
+        }
+    }
+    return aXP1;
+}
+
+/*
+There could be a maximum of 64 different developments with 5 lines, a
+maximum of 32 developments with 4 lines, a maximum of 16 developments with
+3 lines, a maximum of 8 developments with 2 lines.
+This gives us a total of 124 possibilities.
+Normalized for the 1st exit angle to the right, there remain 31 possibilities.
+Now, normalizing away the vertical mirroring, we get to a total of 16
+characteristic developments with 1 through 5 lines:
+
+1 line  (type "I")  --
+
+2 lines (type "L")  __|
+
+3 lines (type "U")  __          (type "Z")      _
+                    __|                       _|
+                                     _                              _
+4 lines          #1   _|        #2  | |         #3 |_          #4  | |
+                    _|             _|               _|              _|
+    Of these, #1 is implausible, #2 is a rotated version of #3. This leaves
+    #2 (from now on referred to as 4.1) and #4 (from now on referred to as 4.2).
+                      _                _
+5 lines          #1   _|        #2   _|         #3   ___       #4   _
+                    _|             _|              _|  _|         _| |_
+                    _               _                _
+                 #5  |_         #6 |_           #7 _| |        #8  ____
+                      _|            _|               _|           |_  _|
+    Of these, 5.1, 5.2, 5.4 and 5.5 are implausible, 5.7 is a reversed version
+    of 5.3. This leaves 5.3 (type "4"), 5.6 (type "S") and 5.8 (type "C").
+
+We now have discerned the 9 basic types to cover all 400 possible constellations
+of object positions and exit angles. 4 of the 9 types have got a center
+line (CL). The number of object margins per object varies between 0 and 3:
+
+        CL      O1      O2      Note
+"I":    n       0       0
+"L":    n       0       0
+"U":    n       0-1     0-1
+"Z":    y       0       0
+4.2:    y       0       1       = U+1, respectively 1+U
+4.4:    n       0-2     0-2     = Z+1
+"4":    y       0       2       = Z+2
+"S":    y       1       1       = 1+Z+1
+"C":    n       0-3     0-3     = 1+U+1
+*/
+
+void SdrEdgeObj::Notify(SfxBroadcaster& rBC, const SfxHint& rHint)
+{
+    const SfxHintId nId = rHint.GetId();
+    bool bDataChg=nId==SfxHintId::DataChanged;
+    bool bDying=nId==SfxHintId::Dying;
+    bool bObj1=aCon1.pObj!=nullptr && aCon1.pObj->GetBroadcaster()==&rBC;
+    bool bObj2=aCon2.pObj!=nullptr && aCon2.pObj->GetBroadcaster()==&rBC;
+    if (bDying && (bObj1 || bObj2)) {
+        // catch Dying, so AttrObj doesn't start broadcasting
+        // about an alleged change of template
+        if (bObj1) aCon1.pObj=nullptr;
+        if (bObj2) aCon2.pObj=nullptr;
+        return;
+    }
+    if ( bObj1 || bObj2 )
+    {
+        bEdgeTrackUserDefined = false;
+    }
+    SdrTextObj::Notify(rBC,rHint);
+    if (nNotifyingCount==0) { // a locking flag
+        nNotifyingCount++;
+        const SdrHint* pSdrHint = ( rHint.GetId() == SfxHintId::ThisIsAnSdrHint ? static_cast<const SdrHint*>(&rHint) : nullptr );
+
+        if (bDataChg) { // StyleSheet changed
+            ImpSetAttrToEdgeInfo(); // when changing templates, copy values from Pool to aEdgeInfo
+        }
+        if (bDataChg                                ||
+            (bObj1 && aCon1.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject()) ||
+            (bObj2 && aCon2.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject()) ||
+            (pSdrHint && pSdrHint->GetKind()==SdrHintKind::ObjectRemoved))
+        {
+            // broadcasting only, if on the same page
+            tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetCurrentBoundRect();
+            ImpDirtyEdgeTrack();
+
+            // only redraw here, object hasn't actually changed
+            ActionChanged();
+
+            SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+        }
+        nNotifyingCount--;
+    }
+}
+
+/** updates edges that are connected to the edges of this object
+    as if the connected objects sent a repaint broadcast
+*/
+void SdrEdgeObj::Reformat()
+{
+    if( nullptr != aCon1.pObj )
+    {
+        SfxHint aHint( SfxHintId::DataChanged );
+        Notify( *const_cast<SfxBroadcaster*>(aCon1.pObj->GetBroadcaster()), aHint );
+    }
+
+    if( nullptr != aCon2.pObj )
+    {
+        SfxHint aHint( SfxHintId::DataChanged );
+        Notify( *const_cast<SfxBroadcaster*>(aCon2.pObj->GetBroadcaster()), aHint );
+    }
+}
+
+SdrEdgeObj* SdrEdgeObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrEdgeObj >(rTargetModel);
+}
+
+SdrEdgeObj& SdrEdgeObj::operator=(const SdrEdgeObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrTextObj::operator=(rObj);
+    *pEdgeTrack    =*rObj.pEdgeTrack;
+    bEdgeTrackDirty=rObj.bEdgeTrackDirty;
+    aCon1          =rObj.aCon1;
+    aCon2          =rObj.aCon2;
+    aCon1.pObj=nullptr;
+    aCon2.pObj=nullptr;
+    aEdgeInfo=rObj.aEdgeInfo;
+    return *this;
+}
+
+OUString SdrEdgeObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulEDGE));
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+    return sName.makeStringAndClear();
+}
+
+OUString SdrEdgeObj::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralEDGE);
+}
+
+basegfx::B2DPolyPolygon SdrEdgeObj::TakeXorPoly() const
+{
+    basegfx::B2DPolyPolygon aPolyPolygon;
+
+    if (bEdgeTrackDirty)
+    {
+        const_cast<SdrEdgeObj*>(this)->ImpRecalcEdgeTrack();
+    }
+
+    if(pEdgeTrack)
+    {
+        aPolyPolygon.append(pEdgeTrack->getB2DPolygon());
+    }
+
+    return aPolyPolygon;
+}
+
+void SdrEdgeObj::SetEdgeTrackPath( const basegfx::B2DPolyPolygon& rPoly )
+{
+    if ( !rPoly.count() )
+    {
+        bEdgeTrackDirty = true;
+        bEdgeTrackUserDefined = false;
+    }
+    else
+    {
+        *pEdgeTrack = XPolygon( rPoly.getB2DPolygon( 0 ) );
+        bEdgeTrackDirty = false;
+        bEdgeTrackUserDefined = true;
+
+        // #i110629# also set aRect and maSnapeRect depending on pEdgeTrack
+        const tools::Rectangle aPolygonBounds(pEdgeTrack->GetBoundRect());
+        maRect = aPolygonBounds;
+        maSnapRect = aPolygonBounds;
+    }
+}
+
+basegfx::B2DPolyPolygon SdrEdgeObj::GetEdgeTrackPath() const
+{
+    basegfx::B2DPolyPolygon aPolyPolygon;
+
+    if (bEdgeTrackDirty)
+        const_cast<SdrEdgeObj*>(this)->ImpRecalcEdgeTrack();
+
+    aPolyPolygon.append( pEdgeTrack->getB2DPolygon() );
+
+    return aPolyPolygon;
+}
+
+sal_uInt32 SdrEdgeObj::GetHdlCount() const
+{
+    SdrEdgeKind eKind=GetObjectItem(SDRATTR_EDGEKIND).GetValue();
+    sal_uInt32 nHdlCnt(0);
+    sal_uInt32 nPointCount(pEdgeTrack->GetPointCount());
+
+    if(nPointCount)
+    {
+        nHdlCnt = 2;
+        if ((eKind==SdrEdgeKind::OrthoLines || eKind==SdrEdgeKind::Bezier) && nPointCount >= 4)
+        {
+             sal_uInt32 nO1(aEdgeInfo.nObj1Lines > 0 ? aEdgeInfo.nObj1Lines - 1 : 0);
+             sal_uInt32 nO2(aEdgeInfo.nObj2Lines > 0 ? aEdgeInfo.nObj2Lines - 1 : 0);
+             sal_uInt32 nM(aEdgeInfo.nMiddleLine != 0xFFFF ? 1 : 0);
+             nHdlCnt += nO1 + nO2 + nM;
+        }
+        else if (eKind==SdrEdgeKind::ThreeLines && nPointCount == 4)
+        {
+            if(GetConnectedNode(true))
+                nHdlCnt++;
+
+            if(GetConnectedNode(false))
+                nHdlCnt++;
+        }
+    }
+
+    return nHdlCnt;
+}
+
+void SdrEdgeObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    sal_uInt32 nPointCount(pEdgeTrack->GetPointCount());
+    if (nPointCount==0)
+        return;
+
+    {
+        std::unique_ptr<SdrHdl> pHdl(new ImpEdgeHdl((*pEdgeTrack)[0],SdrHdlKind::Poly));
+        if (aCon1.pObj!=nullptr && aCon1.bBestVertex) pHdl->Set1PixMore();
+        pHdl->SetPointNum(0);
+        rHdlList.AddHdl(std::move(pHdl));
+    }
+    {
+        std::unique_ptr<SdrHdl> pHdl(new ImpEdgeHdl((*pEdgeTrack)[sal_uInt16(nPointCount-1)],SdrHdlKind::Poly));
+        if (aCon2.pObj!=nullptr && aCon2.bBestVertex) pHdl->Set1PixMore();
+        pHdl->SetPointNum(1);
+        rHdlList.AddHdl(std::move(pHdl));
+    }
+    {
+        SdrEdgeKind eKind=GetObjectItem(SDRATTR_EDGEKIND).GetValue();
+        if ((eKind==SdrEdgeKind::OrthoLines || eKind==SdrEdgeKind::Bezier) && nPointCount >= 4)
+        {
+            sal_uInt32 nO1(aEdgeInfo.nObj1Lines > 0 ? aEdgeInfo.nObj1Lines - 1 : 0);
+            sal_uInt32 nO2(aEdgeInfo.nObj2Lines > 0 ? aEdgeInfo.nObj2Lines - 1 : 0);
+            sal_uInt32 nM(aEdgeInfo.nMiddleLine != 0xFFFF ? 1 : 0);
+            for(sal_uInt32 i = 0; i < (nO1 + nO2 + nM); ++i)
+            {
+                sal_Int32 nPt(0);
+                sal_uInt32 nNum = i;
+                std::unique_ptr<ImpEdgeHdl> pHdl(new ImpEdgeHdl(Point(),SdrHdlKind::Poly));
+                if (nNum<nO1) {
+                    nPt=nNum+1;
+                    if (nNum==0) pHdl->SetLineCode(SdrEdgeLineCode::Obj1Line2);
+                    if (nNum==1) pHdl->SetLineCode(SdrEdgeLineCode::Obj1Line3);
+                } else {
+                    nNum=nNum-nO1;
+                    if (nNum<nO2) {
+                        nPt=nPointCount-3-nNum;
+                        if (nNum==0) pHdl->SetLineCode(SdrEdgeLineCode::Obj2Line2);
+                        if (nNum==1) pHdl->SetLineCode(SdrEdgeLineCode::Obj2Line3);
+                    } else {
+                        nNum=nNum-nO2;
+                        if (nNum<nM) {
+                            nPt=aEdgeInfo.nMiddleLine;
+                            pHdl->SetLineCode(SdrEdgeLineCode::MiddleLine);
+                        }
+                    }
+                }
+                if (nPt>0) {
+                    Point aPos((*pEdgeTrack)[static_cast<sal_uInt16>(nPt)]);
+                    aPos+=(*pEdgeTrack)[static_cast<sal_uInt16>(nPt)+1];
+                    aPos.setX( aPos.X() / 2 );
+                    aPos.setY( aPos.Y() / 2 );
+                    pHdl->SetPos(aPos);
+                    pHdl->SetPointNum(i + 2);
+                    rHdlList.AddHdl(std::move(pHdl));
+                }
+            }
+        }
+        else if (eKind==SdrEdgeKind::ThreeLines && nPointCount == 4)
+        {
+            if(GetConnectedNode(true))
+            {
+                Point aPos((*pEdgeTrack)[1]);
+                std::unique_ptr<ImpEdgeHdl> pHdl(new ImpEdgeHdl(aPos,SdrHdlKind::Poly));
+                pHdl->SetLineCode(SdrEdgeLineCode::Obj1Line2);
+                pHdl->SetPointNum(2);
+                rHdlList.AddHdl(std::move(pHdl));
+            }
+            if(GetConnectedNode(false))
+            {
+                Point aPos((*pEdgeTrack)[2]);
+                std::unique_ptr<ImpEdgeHdl> pHdl(new ImpEdgeHdl(aPos,SdrHdlKind::Poly));
+                pHdl->SetLineCode(SdrEdgeLineCode::Obj2Line2);
+                pHdl->SetPointNum(3);
+                rHdlList.AddHdl(std::move(pHdl));
+            }
+        }
+    }
+}
+
+bool SdrEdgeObj::hasSpecialDrag() const
+{
+    return true;
+}
+
+SdrObjectUniquePtr SdrEdgeObj::getFullDragClone() const
+{
+    // use Clone operator
+    SdrEdgeObj* pRetval(CloneSdrObject(getSdrModelFromSdrObject()));
+
+    // copy connections for clone, SdrEdgeObj::operator= does not do this
+    pRetval->ConnectToNode(true, GetConnectedNode(true));
+    pRetval->ConnectToNode(false, GetConnectedNode(false));
+
+    return SdrObjectUniquePtr(pRetval);
+}
+
+bool SdrEdgeObj::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    if(!rDrag.GetHdl())
+        return false;
+
+    rDrag.SetEndDragChangesAttributes(true);
+
+    if(rDrag.GetHdl()->GetPointNum() < 2)
+    {
+        rDrag.SetNoSnap();
+    }
+
+    return true;
+}
+
+bool SdrEdgeObj::applySpecialDrag(SdrDragStat& rDragStat)
+{
+    SdrEdgeObj* pOriginalEdge = dynamic_cast< SdrEdgeObj* >(rDragStat.GetHdl()->GetObj());
+    const bool bOriginalEdgeModified(pOriginalEdge == this);
+
+    if(!bOriginalEdgeModified && pOriginalEdge)
+    {
+        // copy connections when clone is modified. This is needed because
+        // as preparation to this modification the data from the original object
+        // was copied to the clone using the operator=. As can be seen there,
+        // that operator does not copy the connections (for good reason)
+        ConnectToNode(true, pOriginalEdge->GetConnection(true).GetObject());
+        ConnectToNode(false, pOriginalEdge->GetConnection(false).GetObject());
+    }
+
+    if(rDragStat.GetHdl()->GetPointNum() < 2)
+    {
+        // start or end point connector drag
+        const bool bDragA(0 == rDragStat.GetHdl()->GetPointNum());
+        const Point aPointNow(rDragStat.GetNow());
+
+        rDragStat.SetEndDragChangesGeoAndAttributes(true);
+
+        if(rDragStat.GetPageView())
+        {
+            SdrObjConnection* pDraggedOne(bDragA ? &aCon1 : &aCon2);
+
+            // clear connection
+            DisconnectFromNode(bDragA);
+
+            // look for new connection
+            ImpFindConnector(aPointNow, *rDragStat.GetPageView(), *pDraggedOne, pOriginalEdge);
+
+            if(pDraggedOne->pObj)
+            {
+                // if found, officially connect to it; ImpFindConnector only
+                // sets pObj hard
+                SdrObject* pNewConnection = pDraggedOne->pObj;
+                pDraggedOne->pObj = nullptr;
+                ConnectToNode(bDragA, pNewConnection);
+            }
+
+            if(rDragStat.GetView() && !bOriginalEdgeModified)
+            {
+                // show IA helper, but only do this during IA, so not when the original
+                // Edge gets modified in the last call
+                rDragStat.GetView()->SetConnectMarker(*pDraggedOne);
+            }
+        }
+
+        if(pEdgeTrack)
+        {
+            // change pEdgeTrack to modified position
+            if(bDragA)
+            {
+                (*pEdgeTrack)[0] = aPointNow;
+            }
+            else
+            {
+                (*pEdgeTrack)[sal_uInt16(pEdgeTrack->GetPointCount()-1)] = aPointNow;
+            }
+        }
+
+        // reset edge info's offsets, this is an end point drag
+        aEdgeInfo.aObj1Line2 = Point();
+        aEdgeInfo.aObj1Line3 = Point();
+        aEdgeInfo.aObj2Line2 = Point();
+        aEdgeInfo.aObj2Line3 = Point();
+        aEdgeInfo.aMiddleLine = Point();
+    }
+    else
+    {
+        // control point connector drag
+        const ImpEdgeHdl* pEdgeHdl = static_cast<const ImpEdgeHdl*>(rDragStat.GetHdl());
+        const SdrEdgeLineCode eLineCode = pEdgeHdl->GetLineCode();
+        const Point aDist(rDragStat.GetNow() - rDragStat.GetStart());
+        sal_Int32 nDist(pEdgeHdl->IsHorzDrag() ? aDist.X() : aDist.Y());
+
+        nDist += aEdgeInfo.ImpGetLineOffset(eLineCode, *pEdgeTrack);
+        aEdgeInfo.ImpSetLineOffset(eLineCode, *pEdgeTrack, nDist);
+    }
+
+    // force recalculation of EdgeTrack
+    *pEdgeTrack = ImpCalcEdgeTrack(*pEdgeTrack, aCon1, aCon2, &aEdgeInfo);
+    bEdgeTrackDirty=false;
+
+    // save EdgeInfos and mark object as user modified
+    ImpSetEdgeInfoToAttr();
+    bEdgeTrackUserDefined = false;
+
+    SetRectsDirty();
+
+    if(bOriginalEdgeModified && rDragStat.GetView())
+    {
+        // hide connect marker helper again when original gets changed.
+        // This happens at the end of the interaction
+        rDragStat.GetView()->HideConnectMarker();
+    }
+
+    return true;
+}
+
+OUString SdrEdgeObj::getSpecialDragComment(const SdrDragStat& rDrag) const
+{
+    const bool bCreateComment(rDrag.GetView() && this == rDrag.GetView()->GetCreateObj());
+
+    if(bCreateComment)
+    {
+        return OUString();
+    }
+    else
+    {
+        return ImpGetDescriptionStr(STR_DragEdgeTail);
+    }
+}
+
+
+basegfx::B2DPolygon SdrEdgeObj::ImplAddConnectorOverlay(SdrDragMethod& rDragMethod, bool bTail1, bool bTail2, bool bDetail) const
+{
+    basegfx::B2DPolygon aResult;
+
+    if(bDetail)
+    {
+        SdrObjConnection aMyCon1(aCon1);
+        SdrObjConnection aMyCon2(aCon2);
+
+        if (bTail1)
+        {
+            const basegfx::B2DPoint aTemp(rDragMethod.getCurrentTransformation() * basegfx::B2DPoint(aMyCon1.aObjOfs.X(), aMyCon1.aObjOfs.Y()));
+            aMyCon1.aObjOfs.setX( basegfx::fround(aTemp.getX()) );
+            aMyCon1.aObjOfs.setY( basegfx::fround(aTemp.getY()) );
+        }
+
+        if (bTail2)
+        {
+            const basegfx::B2DPoint aTemp(rDragMethod.getCurrentTransformation() * basegfx::B2DPoint(aMyCon2.aObjOfs.X(), aMyCon2.aObjOfs.Y()));
+            aMyCon2.aObjOfs.setX( basegfx::fround(aTemp.getX()) );
+            aMyCon2.aObjOfs.setY( basegfx::fround(aTemp.getY()) );
+        }
+
+        SdrEdgeInfoRec aInfo(aEdgeInfo);
+        XPolygon aXP(ImpCalcEdgeTrack(*pEdgeTrack, aMyCon1, aMyCon2, &aInfo));
+
+        if(aXP.GetPointCount())
+        {
+            aResult = aXP.getB2DPolygon();
+        }
+    }
+    else
+    {
+        Point aPt1((*pEdgeTrack)[0]);
+        Point aPt2((*pEdgeTrack)[sal_uInt16(pEdgeTrack->GetPointCount() - 1)]);
+
+        if (aCon1.pObj && (aCon1.bBestConn || aCon1.bBestVertex))
+            aPt1 = aCon1.pObj->GetSnapRect().Center();
+
+        if (aCon2.pObj && (aCon2.bBestConn || aCon2.bBestVertex))
+            aPt2 = aCon2.pObj->GetSnapRect().Center();
+
+        if (bTail1)
+        {
+            const basegfx::B2DPoint aTemp(rDragMethod.getCurrentTransformation() * basegfx::B2DPoint(aPt1.X(), aPt1.Y()));
+            aPt1.setX( basegfx::fround(aTemp.getX()) );
+            aPt1.setY( basegfx::fround(aTemp.getY()) );
+        }
+
+        if (bTail2)
+        {
+            const basegfx::B2DPoint aTemp(rDragMethod.getCurrentTransformation() * basegfx::B2DPoint(aPt2.X(), aPt2.Y()));
+            aPt2.setX( basegfx::fround(aTemp.getX()) );
+            aPt2.setY( basegfx::fround(aTemp.getY()) );
+        }
+
+        aResult.append(basegfx::B2DPoint(aPt1.X(), aPt1.Y()));
+        aResult.append(basegfx::B2DPoint(aPt2.X(), aPt2.Y()));
+    }
+
+    return aResult;
+}
+
+bool SdrEdgeObj::BegCreate(SdrDragStat& rDragStat)
+{
+    rDragStat.SetNoSnap();
+    pEdgeTrack->SetPointCount(2);
+    (*pEdgeTrack)[0]=rDragStat.GetStart();
+    (*pEdgeTrack)[1]=rDragStat.GetNow();
+    if (rDragStat.GetPageView()!=nullptr) {
+        ImpFindConnector(rDragStat.GetStart(),*rDragStat.GetPageView(),aCon1,this);
+        ConnectToNode(true,aCon1.pObj);
+    }
+    *pEdgeTrack=ImpCalcEdgeTrack(*pEdgeTrack,aCon1,aCon2,&aEdgeInfo);
+    return true;
+}
+
+bool SdrEdgeObj::MovCreate(SdrDragStat& rDragStat)
+{
+    sal_uInt16 nMax=pEdgeTrack->GetPointCount();
+    (*pEdgeTrack)[nMax-1]=rDragStat.GetNow();
+    if (rDragStat.GetPageView()!=nullptr) {
+        ImpFindConnector(rDragStat.GetNow(),*rDragStat.GetPageView(),aCon2,this);
+        rDragStat.GetView()->SetConnectMarker(aCon2);
+    }
+    SetBoundRectDirty();
+    bSnapRectDirty=true;
+    ConnectToNode(false,aCon2.pObj);
+    *pEdgeTrack=ImpCalcEdgeTrack(*pEdgeTrack,aCon1,aCon2,&aEdgeInfo);
+    bEdgeTrackDirty=false;
+    return true;
+}
+
+bool SdrEdgeObj::EndCreate(SdrDragStat& rDragStat, SdrCreateCmd eCmd)
+{
+    bool bOk=(eCmd==SdrCreateCmd::ForceEnd || rDragStat.GetPointCount()>=2);
+    if (bOk) {
+        ConnectToNode(true,aCon1.pObj);
+        ConnectToNode(false,aCon2.pObj);
+        if (rDragStat.GetView()!=nullptr) {
+            rDragStat.GetView()->HideConnectMarker();
+        }
+        ImpSetEdgeInfoToAttr(); // copy values from aEdgeInfo into the pool
+    }
+    SetRectsDirty();
+    return bOk;
+}
+
+bool SdrEdgeObj::BckCreate(SdrDragStat& rDragStat)
+{
+    if (rDragStat.GetView()!=nullptr) {
+        rDragStat.GetView()->HideConnectMarker();
+    }
+    return false;
+}
+
+void SdrEdgeObj::BrkCreate(SdrDragStat& rDragStat)
+{
+    if (rDragStat.GetView()!=nullptr) {
+        rDragStat.GetView()->HideConnectMarker();
+    }
+}
+
+basegfx::B2DPolyPolygon SdrEdgeObj::TakeCreatePoly(const SdrDragStat& /*rStatDrag*/) const
+{
+    basegfx::B2DPolyPolygon aRetval;
+    aRetval.append(pEdgeTrack->getB2DPolygon());
+    return aRetval;
+}
+
+PointerStyle SdrEdgeObj::GetCreatePointer() const
+{
+    return PointerStyle::DrawConnect;
+}
+
+bool SdrEdgeObj::ImpFindConnector(const Point& rPt, const SdrPageView& rPV, SdrObjConnection& rCon, const SdrEdgeObj* pThis, OutputDevice* pOut)
+{
+    rCon.ResetVars();
+    if (pOut==nullptr) pOut=rPV.GetView().GetFirstOutputDevice();
+    if (pOut==nullptr) return false;
+    SdrObjList* pOL=rPV.GetObjList();
+    const SdrLayerIDSet& rVisLayer=rPV.GetVisibleLayers();
+    // sensitive area of connectors is twice as large as the one of the handles
+    sal_uInt16 nMarkHdSiz=rPV.GetView().GetMarkHdlSizePixel();
+    Size aHalfConSiz(nMarkHdSiz,nMarkHdSiz);
+    aHalfConSiz=pOut->PixelToLogic(aHalfConSiz);
+    tools::Rectangle aMouseRect(rPt,rPt);
+    aMouseRect.AdjustLeft( -(aHalfConSiz.Width()) );
+    aMouseRect.AdjustTop( -(aHalfConSiz.Height()) );
+    aMouseRect.AdjustRight(aHalfConSiz.Width() );
+    aMouseRect.AdjustBottom(aHalfConSiz.Height() );
+    sal_uInt16 nBoundHitTol=static_cast<sal_uInt16>(aHalfConSiz.Width())/2; if (nBoundHitTol==0) nBoundHitTol=1;
+    size_t no=pOL->GetObjCount();
+    bool bFnd = false;
+    SdrObjConnection aTestCon;
+
+    while (no>0 && !bFnd) {
+        // issue: group objects on different layers return LayerID=0!
+        no--;
+        SdrObject* pObj=pOL->GetObj(no);
+        if (rVisLayer.IsSet(pObj->GetLayer()) && pObj->IsVisible() &&      // only visible objects
+            (pThis==nullptr || pObj!=static_cast<SdrObject const *>(pThis))) // don't connect it to itself
+        {
+            tools::Rectangle aObjBound(pObj->GetCurrentBoundRect());
+            if (aObjBound.IsOver(aMouseRect)) {
+                aTestCon.ResetVars();
+                bool bEdge=dynamic_cast<const SdrEdgeObj *>(pObj) != nullptr; // no BestCon for Edge
+                // User-defined connectors have absolute priority.
+                // After those come Vertex, Corner and center (Best), all prioritized equally.
+                // Finally, a HitTest for the object.
+                const SdrGluePointList* pGPL=pObj->GetGluePointList();
+                sal_uInt16 nGluePointCnt=pGPL==nullptr ? 0 : pGPL->GetCount();
+                sal_uInt16 nGesAnz=nGluePointCnt+9;
+                bool bUserFnd = false;
+                sal_uIntPtr nBestDist=0xFFFFFFFF;
+                for (sal_uInt16 i=0; i<nGesAnz; i++)
+                {
+                    bool bUser=i<nGluePointCnt;
+                    bool bVertex=i>=nGluePointCnt+0 && i<nGluePointCnt+4;
+                    bool bCorner=i>=nGluePointCnt+4 && i<nGluePointCnt+8;
+                    bool bCenter=i==nGluePointCnt+8;
+                    bool bOk = false;
+                    Point aConPos;
+                    sal_uInt16 nConNum=i;
+                    if (bUser) {
+                        const SdrGluePoint& rGP=(*pGPL)[nConNum];
+                        aConPos=rGP.GetAbsolutePos(*pObj);
+                        nConNum=rGP.GetId();
+                        bOk = true;
+                    } else if (bVertex && !bUserFnd) {
+                        nConNum=nConNum-nGluePointCnt;
+                        SdrGluePoint aPt(pObj->GetVertexGluePoint(nConNum));
+                        aConPos=aPt.GetAbsolutePos(*pObj);
+                        bOk = true;
+                    } else if (bCorner && !bUserFnd) {
+                        nConNum-=nGluePointCnt+4;
+                        i+=3;
+                    }
+                    else if (bCenter && !bUserFnd && !bEdge)
+                    {
+                        // Suppress default connect at object center
+                        if(!pThis || !pThis->GetSuppressDefaultConnect())
+                        {
+                            // not the edges!
+                            nConNum=0;
+                            aConPos=aObjBound.Center();
+                            bOk = true;
+                        }
+                    }
+                    if (bOk && aMouseRect.IsInside(aConPos)) {
+                        if (bUser) bUserFnd = true;
+                        bFnd = true;
+                        sal_uIntPtr nDist=static_cast<sal_uIntPtr>(std::abs(aConPos.X()-rPt.X()))+static_cast<sal_uIntPtr>(std::abs(aConPos.Y()-rPt.Y()));
+                        if (nDist<nBestDist) {
+                            nBestDist=nDist;
+                            aTestCon.pObj=pObj;
+                            aTestCon.nConId=nConNum;
+                            aTestCon.bAutoCorner=bCorner;
+                            aTestCon.bAutoVertex=bVertex;
+                            aTestCon.bBestConn=false; // bCenter;
+                            aTestCon.bBestVertex=bCenter;
+                        }
+                    }
+                }
+                // if no connector is hit, try HitTest again, for BestConnector (=bCenter)
+                if(!bFnd &&
+                    !bEdge &&
+                    SdrObjectPrimitiveHit(*pObj, rPt, nBoundHitTol, rPV, &rVisLayer, false))
+                {
+                    // Suppress default connect at object inside bound
+                    if(!pThis || !pThis->GetSuppressDefaultConnect())
+                    {
+                        bFnd = true;
+                        aTestCon.pObj=pObj;
+                        aTestCon.bBestConn=true;
+                    }
+                }
+                if (bFnd) {
+                    aMouseRect.AdjustLeft( -nBoundHitTol );
+                    aMouseRect.AdjustTop( -nBoundHitTol );
+                    aMouseRect.AdjustRight(nBoundHitTol );
+                    aMouseRect.AdjustBottom(nBoundHitTol );
+                }
+
+            }
+        }
+    }
+    rCon=aTestCon;
+    return bFnd;
+}
+
+void SdrEdgeObj::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    const tools::Rectangle aOld(GetSnapRect());
+
+    if(aOld != rRect)
+    {
+        if (maRect.IsEmpty() && 0 == pEdgeTrack->GetPointCount())
+        {
+            // #i110629# When initializing, do not scale on empty Rectangle; this
+            // will mirror the underlying text object (!)
+            maRect = rRect;
+            maSnapRect = rRect;
+        }
+        else
+        {
+            long nMulX = rRect.Right()  - rRect.Left();
+            long nDivX = aOld.Right()   - aOld.Left();
+            long nMulY = rRect.Bottom() - rRect.Top();
+            long nDivY = aOld.Bottom()  - aOld.Top();
+            if ( nDivX == 0 ) { nMulX = 1; nDivX = 1; }
+            if ( nDivY == 0 ) { nMulY = 1; nDivY = 1; }
+            Fraction aX(nMulX, nDivX);
+            Fraction aY(nMulY, nDivY);
+            NbcResize(aOld.TopLeft(), aX, aY);
+            NbcMove(Size(rRect.Left() - aOld.Left(), rRect.Top() - aOld.Top()));
+        }
+    }
+}
+
+void SdrEdgeObj::NbcMove(const Size& rSiz)
+{
+    SdrTextObj::NbcMove(rSiz);
+    MoveXPoly(*pEdgeTrack,rSiz);
+}
+
+void SdrEdgeObj::NbcResize(const Point& rRefPnt, const Fraction& aXFact, const Fraction& aYFact)
+{
+    SdrTextObj::NbcResize(rRefPnt,aXFact,aXFact);
+    ResizeXPoly(*pEdgeTrack,rRefPnt,aXFact,aYFact);
+
+    // if resize is not from paste, forget user distances
+    if (!getSdrModelFromSdrObject().IsPasteResize())
+    {
+        aEdgeInfo.aObj1Line2 = Point();
+        aEdgeInfo.aObj1Line3 = Point();
+        aEdgeInfo.aObj2Line2 = Point();
+        aEdgeInfo.aObj2Line3 = Point();
+        aEdgeInfo.aMiddleLine = Point();
+    }
+}
+
+// #i54102# added rotation support
+void SdrEdgeObj::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    if(bEdgeTrackUserDefined)
+    {
+        // #i120437# special handling when track is imported, apply
+        // transformation directly to imported track.
+        SdrTextObj::NbcRotate(rRef, nAngle, sn, cs);
+        RotateXPoly(*pEdgeTrack, rRef, sn, cs);
+    }
+    else
+    {
+        // handle start and end point if not connected
+        const bool bCon1(nullptr != aCon1.pObj && aCon1.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+        const bool bCon2(nullptr != aCon2.pObj && aCon2.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+
+        if(!bCon1 && pEdgeTrack)
+        {
+            RotatePoint((*pEdgeTrack)[0],rRef,sn,cs);
+            ImpDirtyEdgeTrack();
+        }
+
+        if(!bCon2 && pEdgeTrack)
+        {
+            sal_uInt16 nPointCount = pEdgeTrack->GetPointCount();
+            RotatePoint((*pEdgeTrack)[sal_uInt16(nPointCount-1)],rRef,sn,cs);
+            ImpDirtyEdgeTrack();
+        }
+    }
+}
+
+// #i54102# added mirror support
+void SdrEdgeObj::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    if(bEdgeTrackUserDefined)
+    {
+        // #i120437# special handling when track is imported, apply
+        // transformation directly to imported track.
+        SdrTextObj::NbcMirror(rRef1, rRef2);
+        MirrorXPoly(*pEdgeTrack, rRef1, rRef2);
+    }
+    else
+    {
+        // handle start and end point if not connected
+        const bool bCon1(nullptr != aCon1.pObj && aCon1.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+        const bool bCon2(nullptr != aCon2.pObj && aCon2.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+
+        if(!bCon1 && pEdgeTrack)
+        {
+            MirrorPoint((*pEdgeTrack)[0],rRef1,rRef2);
+            ImpDirtyEdgeTrack();
+        }
+
+        if(!bCon2 && pEdgeTrack)
+        {
+            sal_uInt16 nPointCount = pEdgeTrack->GetPointCount();
+            MirrorPoint((*pEdgeTrack)[sal_uInt16(nPointCount-1)],rRef1,rRef2);
+            ImpDirtyEdgeTrack();
+        }
+    }
+}
+
+// #i54102# added shear support
+void SdrEdgeObj::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    if(bEdgeTrackUserDefined)
+    {
+        // #i120437# special handling when track is imported, apply
+        // transformation directly to imported track.
+        SdrTextObj::NbcShear(rRef, nAngle, tn, bVShear);
+        ShearXPoly(*pEdgeTrack, rRef, tn, bVShear);
+    }
+    else
+    {
+        // handle start and end point if not connected
+        const bool bCon1(nullptr != aCon1.pObj && aCon1.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+        const bool bCon2(nullptr != aCon2.pObj && aCon2.pObj->getSdrPageFromSdrObject() == getSdrPageFromSdrObject());
+
+        if(!bCon1 && pEdgeTrack)
+        {
+            ShearPoint((*pEdgeTrack)[0],rRef,tn,bVShear);
+            ImpDirtyEdgeTrack();
+        }
+
+        if(!bCon2 && pEdgeTrack)
+        {
+            sal_uInt16 nPointCount = pEdgeTrack->GetPointCount();
+            ShearPoint((*pEdgeTrack)[sal_uInt16(nPointCount-1)],rRef,tn,bVShear);
+            ImpDirtyEdgeTrack();
+        }
+    }
+}
+
+SdrObjectUniquePtr SdrEdgeObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    basegfx::B2DPolyPolygon aPolyPolygon;
+    aPolyPolygon.append(pEdgeTrack->getB2DPolygon());
+    SdrObjectUniquePtr pRet = ImpConvertMakeObj(aPolyPolygon, false, bBezier);
+
+    if(bAddText)
+    {
+        pRet = ImpConvertAddText(std::move(pRet), bBezier);
+    }
+
+    return pRet;
+}
+
+sal_uInt32 SdrEdgeObj::GetSnapPointCount() const
+{
+    return 2;
+}
+
+Point SdrEdgeObj::GetSnapPoint(sal_uInt32 i) const
+{
+    const_cast<SdrEdgeObj*>(this)->ImpUndirtyEdgeTrack();
+    sal_uInt16 nCount=pEdgeTrack->GetPointCount();
+    if (i==0) return (*pEdgeTrack)[0];
+    else return (*pEdgeTrack)[nCount-1];
+}
+
+bool SdrEdgeObj::IsPolyObj() const
+{
+    return false;
+}
+
+sal_uInt32 SdrEdgeObj::GetPointCount() const
+{
+    return 0;
+}
+
+Point SdrEdgeObj::GetPoint(sal_uInt32 i) const
+{
+    const_cast<SdrEdgeObj*>(this)->ImpUndirtyEdgeTrack();
+    sal_uInt16 nCount=pEdgeTrack->GetPointCount();
+    if (0 == i)
+        return (*pEdgeTrack)[0];
+    else
+        return (*pEdgeTrack)[nCount-1];
+}
+
+void SdrEdgeObj::NbcSetPoint(const Point& rPnt, sal_uInt32 i)
+{
+    // TODO: Need an implementation to connect differently.
+    ImpUndirtyEdgeTrack();
+    sal_uInt16 nCount=pEdgeTrack->GetPointCount();
+    if (0 == i)
+        (*pEdgeTrack)[0]=rPnt;
+    if (1 == i)
+        (*pEdgeTrack)[nCount-1]=rPnt;
+    SetEdgeTrackDirty();
+    SetRectsDirty();
+}
+
+SdrEdgeObjGeoData::SdrEdgeObjGeoData()
+    : pEdgeTrack(new XPolygon)
+    , bEdgeTrackDirty(false)
+    , bEdgeTrackUserDefined(false)
+{
+}
+
+SdrEdgeObjGeoData::~SdrEdgeObjGeoData()
+{
+}
+
+SdrObjGeoData* SdrEdgeObj::NewGeoData() const
+{
+    return new SdrEdgeObjGeoData;
+}
+
+void SdrEdgeObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrTextObj::SaveGeoData(rGeo);
+    SdrEdgeObjGeoData& rEGeo=static_cast<SdrEdgeObjGeoData&>(rGeo);
+    rEGeo.aCon1          =aCon1;
+    rEGeo.aCon2          =aCon2;
+    *rEGeo.pEdgeTrack    =*pEdgeTrack;
+    rEGeo.bEdgeTrackDirty=bEdgeTrackDirty;
+    rEGeo.bEdgeTrackUserDefined=bEdgeTrackUserDefined;
+    rEGeo.aEdgeInfo      =aEdgeInfo;
+}
+
+void SdrEdgeObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrTextObj::RestGeoData(rGeo);
+    const SdrEdgeObjGeoData& rEGeo=static_cast<const SdrEdgeObjGeoData&>(rGeo);
+    if (aCon1.pObj!=rEGeo.aCon1.pObj) {
+        if (aCon1.pObj!=nullptr) aCon1.pObj->RemoveListener(*this);
+        aCon1=rEGeo.aCon1;
+        if (aCon1.pObj!=nullptr) aCon1.pObj->AddListener(*this);
+    }
+    else
+        aCon1=rEGeo.aCon1;
+
+    if (aCon2.pObj!=rEGeo.aCon2.pObj) {
+        if (aCon2.pObj!=nullptr) aCon2.pObj->RemoveListener(*this);
+        aCon2=rEGeo.aCon2;
+        if (aCon2.pObj!=nullptr) aCon2.pObj->AddListener(*this);
+    }
+    else
+        aCon2=rEGeo.aCon2;
+
+    *pEdgeTrack    =*rEGeo.pEdgeTrack;
+    bEdgeTrackDirty=rEGeo.bEdgeTrackDirty;
+    bEdgeTrackUserDefined=rEGeo.bEdgeTrackUserDefined;
+    aEdgeInfo      =rEGeo.aEdgeInfo;
+}
+
+Point SdrEdgeObj::GetTailPoint( bool bTail ) const
+{
+    if( pEdgeTrack && pEdgeTrack->GetPointCount()!=0)
+    {
+        const XPolygon& rTrack0 = *pEdgeTrack;
+        if(bTail)
+        {
+            return rTrack0[0];
+        }
+        else
+        {
+            const sal_uInt16 nSiz = rTrack0.GetPointCount() - 1;
+            return rTrack0[nSiz];
+        }
+    }
+    else
+    {
+        if(bTail)
+            return aOutRect.TopLeft();
+        else
+            return aOutRect.BottomRight();
+    }
+
+}
+
+void SdrEdgeObj::SetTailPoint( bool bTail, const Point& rPt )
+{
+    ImpSetTailPoint( bTail, rPt );
+    SetChanged();
+}
+
+/** this method is used by the api to set a glue point for a connection
+    nId == -1 :     The best default point is automatically chosen
+    0 <= nId <= 3 : One of the default points is chosen
+    nId >= 4 :      A user defined glue point is chosen
+*/
+void SdrEdgeObj::setGluePointIndex( bool bTail, sal_Int32 nIndex /* = -1 */ )
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetCurrentBoundRect();
+
+    SdrObjConnection& rConn1 = GetConnection( bTail );
+
+    rConn1.SetAutoVertex( nIndex >= 0 && nIndex <= 3 );
+    rConn1.SetBestConnection( nIndex < 0 );
+    rConn1.SetBestVertex( nIndex < 0 );
+
+    if( nIndex > 3 )
+    {
+        nIndex -= 3;        // the start api index is 0, whereas the implementation in svx starts from 1
+
+        // for user defined glue points we have
+        // to get the id for this index first
+        const SdrGluePointList* pList = rConn1.GetObject() ? rConn1.GetObject()->GetGluePointList() : nullptr;
+        if( pList == nullptr || SDRGLUEPOINT_NOTFOUND == pList->FindGluePoint(static_cast<sal_uInt16>(nIndex)) )
+            return;
+    }
+    else if( nIndex < 0 )
+    {
+        nIndex = 0;
+    }
+
+    rConn1.SetConnectorId( static_cast<sal_uInt16>(nIndex) );
+
+    SetChanged();
+    SetRectsDirty();
+    ImpRecalcEdgeTrack();
+}
+
+/** this method is used by the api to return a glue point id for a connection.
+    See setGluePointId for possible return values */
+sal_Int32 SdrEdgeObj::getGluePointIndex( bool bTail )
+{
+    SdrObjConnection& rConn1 = GetConnection( bTail );
+    sal_Int32 nId = -1;
+    if( !rConn1.IsBestConnection() )
+    {
+        nId = rConn1.GetConnectorId();
+        if( !rConn1.IsAutoVertex() )
+            nId += 3;       // the start api index is 0, whereas the implementation in svx starts from 1
+    }
+    return nId;
+}
+
+// Implementation was missing; edge track needs to be invalidated additionally.
+void SdrEdgeObj::NbcSetAnchorPos(const Point& rPnt)
+{
+    // call parent functionality
+    SdrTextObj::NbcSetAnchorPos(rPnt);
+
+    // Additionally, invalidate edge track
+    ImpDirtyEdgeTrack();
+}
+
+bool SdrEdgeObj::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& rPolyPolygon) const
+{
+    // use base method from SdrObject, it's not rotatable and
+    // a call to GetSnapRect() is used. That's what we need for Connector.
+    return SdrObject::TRGetBaseGeometry(rMatrix, rPolyPolygon);
+}
+
+void SdrEdgeObj::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& rPolyPolygon)
+{
+    // where appropriate take care for existing connections. For now, just use the
+    // implementation from SdrObject.
+    SdrObject::TRSetBaseGeometry(rMatrix, rPolyPolygon);
+}
+
+// for geometry access
+::basegfx::B2DPolygon SdrEdgeObj::getEdgeTrack() const
+{
+    if(bEdgeTrackDirty)
+    {
+        const_cast< SdrEdgeObj* >(this)->ImpRecalcEdgeTrack();
+    }
+
+    if(pEdgeTrack)
+    {
+        return pEdgeTrack->getB2DPolygon();
+    }
+    else
+    {
+        return ::basegfx::B2DPolygon();
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdograf.cxx b/svx/source/svdraw/svdograf.cxx
new file mode 100644
index 000000000..be60f5697
--- /dev/null
+++ b/svx/source/svdraw/svdograf.cxx
@@ -0,0 +1,1257 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <unotools/streamwrap.hxx>
+
+#include <sfx2/lnkbase.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <tools/helpers.hxx>
+#include <tools/stream.hxx>
+#include <sot/exchange.hxx>
+#include <sot/formats.hxx>
+#include <vcl/GraphicObject.hxx>
+#include <vcl/svapp.hxx>
+
+#include <sfx2/linkmgr.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdhdl.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/xbtmpit.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflbmtit.hxx>
+#include "svdfmtf.hxx"
+#include <sdgcoitm.hxx>
+#include <svx/sdgcpitm.hxx>
+#include <svx/sdggaitm.hxx>
+#include <sdginitm.hxx>
+#include <svx/sdgluitm.hxx>
+#include <svx/sdgmoitm.hxx>
+#include <sdgtritm.hxx>
+#include <sdr/properties/graphicproperties.hxx>
+#include <sdr/contact/viewcontactofgraphic.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <drawinglayer/processor2d/objectinfoextractor2d.hxx>
+#include <drawinglayer/primitive2d/objectinfoprimitive2d.hxx>
+#include <memory>
+
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::io;
+
+class SdrGraphicLink : public sfx2::SvBaseLink
+{
+    SdrGrafObj&         rGrafObj;
+
+public:
+    explicit            SdrGraphicLink(SdrGrafObj& rObj);
+
+    virtual void        Closed() override;
+
+    virtual ::sfx2::SvBaseLink::UpdateResult DataChanged(
+        const OUString& rMimeType, const css::uno::Any & rValue ) override;
+
+    void                Connect() { GetRealObject(); }
+};
+
+SdrGraphicLink::SdrGraphicLink(SdrGrafObj& rObj)
+: ::sfx2::SvBaseLink( ::SfxLinkUpdateMode::ONCALL, SotClipboardFormatId::SVXB )
+, rGrafObj( rObj )
+{
+    SetSynchron( false );
+}
+
+::sfx2::SvBaseLink::UpdateResult SdrGraphicLink::DataChanged(
+    const OUString& rMimeType, const css::uno::Any & rValue )
+{
+    SdrModel& rModel(rGrafObj.getSdrModelFromSdrObject());
+    sfx2::LinkManager* pLinkManager(rModel.GetLinkManager());
+
+    if( pLinkManager && rValue.hasValue() )
+    {
+        sfx2::LinkManager::GetDisplayNames( this, nullptr, &rGrafObj.aFileName, nullptr, &rGrafObj.aFilterName );
+
+        Graphic aGraphic;
+        if (pLinkManager->GetGraphicFromAny(rMimeType, rValue, aGraphic, nullptr))
+        {
+            rGrafObj.ImpSetLinkedGraphic(aGraphic);
+        }
+        else if( SotExchange::GetFormatIdFromMimeType( rMimeType ) != sfx2::LinkManager::RegisterStatusInfoId() )
+        {
+            // broadcasting, to update slide sorter
+            rGrafObj.BroadcastObjectChange();
+        }
+    }
+    return SUCCESS;
+}
+
+void SdrGraphicLink::Closed()
+{
+    // close connection; set pLink of the object to NULL, as link instance is just about getting destructed.
+    rGrafObj.ForceSwapIn();
+    rGrafObj.pGraphicLink=nullptr;
+    rGrafObj.ReleaseGraphicLink();
+    SvBaseLink::Closed();
+}
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrGrafObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::GraphicProperties>(*this);
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrGrafObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfGraphic>(*this);
+}
+
+
+// check if SVG and if try to get ObjectInfoPrimitive2D and extract info
+
+void SdrGrafObj::onGraphicChanged()
+{
+    if (!mpGraphicObject || !mpGraphicObject->GetGraphic().isAvailable())
+        return;
+
+    auto const & rVectorGraphicDataPtr = mpGraphicObject->GetGraphic().getVectorGraphicData();
+
+    if (!rVectorGraphicDataPtr)
+        return;
+
+    // Skip for PDF as it is only a bitmap primitive in a sequence and
+    // doesn't contain metadata. However getting the primitive sequence
+    // will also trigger a premature rendering of the PDF.
+    if (rVectorGraphicDataPtr->getVectorGraphicDataType() == VectorGraphicDataType::Pdf)
+        return;
+
+    const drawinglayer::primitive2d::Primitive2DContainer aSequence(rVectorGraphicDataPtr->getPrimitive2DSequence());
+
+    if (aSequence.empty())
+        return;
+
+    drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+    drawinglayer::processor2d::ObjectInfoPrimitiveExtractor2D aProcessor(aViewInformation2D);
+
+    aProcessor.process(aSequence);
+
+    const drawinglayer::primitive2d::ObjectInfoPrimitive2D* pResult = aProcessor.getResult();
+
+    if (!pResult)
+        return;
+
+    OUString aName = pResult->getName();
+    OUString aTitle = pResult->getTitle();
+    OUString aDesc = pResult->getDesc();
+
+    if(!aName.isEmpty())
+    {
+        SetName(aName);
+    }
+
+    if(!aTitle.isEmpty())
+    {
+        SetTitle(aTitle);
+    }
+
+    if(!aDesc.isEmpty())
+    {
+        SetDescription(aDesc);
+    }
+}
+
+SdrGrafObj::SdrGrafObj(SdrModel& rSdrModel)
+:   SdrRectObj(rSdrModel)
+    ,mpGraphicObject(new GraphicObject)
+    ,pGraphicLink(nullptr)
+    ,bMirrored(false)
+    ,mbIsSignatureLine(false)
+    ,mbIsSignatureLineShowSignDate(true)
+    ,mbIsSignatureLineCanAddComment(false)
+    ,mbSignatureLineIsSigned(false)
+{
+    onGraphicChanged();
+
+    // #i118485# Shear allowed and possible now
+    bNoShear = false;
+
+    mbGrafAnimationAllowed = true;
+
+    // #i25616#
+    mbLineIsOutsideGeometry = true;
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = false;
+}
+
+SdrGrafObj::SdrGrafObj(
+    SdrModel& rSdrModel,
+    const Graphic& rGraphic,
+    const tools::Rectangle& rRect)
+:   SdrRectObj(rSdrModel, rRect)
+    ,mpGraphicObject(new GraphicObject(rGraphic))
+    ,pGraphicLink(nullptr)
+    ,bMirrored(false)
+    ,mbIsSignatureLine(false)
+    ,mbIsSignatureLineShowSignDate(true)
+    ,mbIsSignatureLineCanAddComment(false)
+    ,mbSignatureLineIsSigned(false)
+{
+    onGraphicChanged();
+
+    // #i118485# Shear allowed and possible now
+    bNoShear = false;
+
+    mbGrafAnimationAllowed = true;
+
+    // #i25616#
+    mbLineIsOutsideGeometry = true;
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = false;
+}
+
+SdrGrafObj::SdrGrafObj(
+    SdrModel& rSdrModel,
+    const Graphic& rGraphic)
+:   SdrRectObj(rSdrModel)
+    ,mpGraphicObject(new GraphicObject(rGraphic))
+    ,pGraphicLink(nullptr)
+    ,bMirrored(false)
+    ,mbIsSignatureLine(false)
+    ,mbIsSignatureLineShowSignDate(true)
+    ,mbIsSignatureLineCanAddComment(false)
+    ,mbSignatureLineIsSigned(false)
+{
+    onGraphicChanged();
+
+    // #i118485# Shear allowed and possible now
+    bNoShear = false;
+
+    mbGrafAnimationAllowed = true;
+
+    // #i25616#
+    mbLineIsOutsideGeometry = true;
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = false;
+}
+
+SdrGrafObj::~SdrGrafObj()
+{
+    ImpDeregisterLink();
+}
+
+void SdrGrafObj::SetGraphicObject(const GraphicObject& rGraphicObject)
+{
+    mpGraphicObject.reset(new GraphicObject(rGraphicObject));
+    mpReplacementGraphicObject.reset();
+    mpGraphicObject->SetUserData();
+    SetChanged();
+    BroadcastObjectChange();
+    onGraphicChanged();
+}
+
+const GraphicObject& SdrGrafObj::GetGraphicObject(bool bForceSwapIn) const
+{
+    if (bForceSwapIn)
+        ForceSwapIn();
+    return *mpGraphicObject;
+}
+
+const GraphicObject* SdrGrafObj::GetReplacementGraphicObject() const
+{
+    if (!mpReplacementGraphicObject && mpGraphicObject)
+    {
+        auto const & rVectorGraphicDataPtr = mpGraphicObject->GetGraphic().getVectorGraphicData();
+
+        if (rVectorGraphicDataPtr)
+        {
+            const_cast< SdrGrafObj* >(this)->mpReplacementGraphicObject.reset(new GraphicObject(rVectorGraphicDataPtr->getReplacement()));
+        }
+        else if (mpGraphicObject->GetGraphic().GetType() == GraphicType::GdiMetafile)
+        {
+            // Replacement graphic for PDF and metafiles is just the bitmap.
+            const_cast<SdrGrafObj*>(this)->mpReplacementGraphicObject.reset(new GraphicObject(mpGraphicObject->GetGraphic().GetBitmapEx()));
+        }
+    }
+
+    return mpReplacementGraphicObject.get();
+}
+
+void SdrGrafObj::NbcSetGraphic(const Graphic& rGraphic)
+{
+    mpGraphicObject->SetGraphic(rGraphic);
+    mpReplacementGraphicObject.reset();
+    mpGraphicObject->SetUserData();
+    onGraphicChanged();
+}
+
+void SdrGrafObj::SetGraphic( const Graphic& rGraphic )
+{
+    if (!rGraphic.getOriginURL().isEmpty())
+    {
+        ImpDeregisterLink();
+        aFileName = rGraphic.getOriginURL();
+        aReferer = "";
+        aFilterName = "";
+    }
+    NbcSetGraphic(rGraphic);
+    if (!rGraphic.getOriginURL().isEmpty())
+    {
+        ImpRegisterLink();
+        mpGraphicObject->SetUserData();
+    }
+    SetChanged();
+    BroadcastObjectChange();
+    ForceSwapIn();
+}
+
+const Graphic& SdrGrafObj::GetGraphic() const
+{
+    return mpGraphicObject->GetGraphic();
+}
+
+Graphic SdrGrafObj::GetTransformedGraphic( SdrGrafObjTransformsAttrs nTransformFlags ) const
+{
+    // Refactored most of the code to GraphicObject, where
+    // everybody can use e.g. the cropping functionality
+    MapMode aDestMap(
+        getSdrModelFromSdrObject().GetScaleUnit(),
+        Point(),
+        getSdrModelFromSdrObject().GetScaleFraction(),
+        getSdrModelFromSdrObject().GetScaleFraction());
+    const Size aDestSize( GetLogicRect().GetSize() );
+    GraphicAttr aActAttr = GetGraphicAttr(nTransformFlags);
+
+    // Delegate to moved code in GraphicObject
+    return GetGraphicObject().GetTransformedGraphic( aDestSize, aDestMap, aActAttr );
+}
+
+GraphicType SdrGrafObj::GetGraphicType() const
+{
+    return mpGraphicObject->GetType();
+}
+
+GraphicAttr SdrGrafObj::GetGraphicAttr( SdrGrafObjTransformsAttrs nTransformFlags ) const
+{
+    GraphicAttr aActAttr;
+
+    GraphicType eType = GetGraphicType();
+    if( SdrGrafObjTransformsAttrs::NONE != nTransformFlags &&
+        GraphicType::NONE != eType )
+    {
+        const bool      bMirror = bool( nTransformFlags & SdrGrafObjTransformsAttrs::MIRROR );
+        const bool      bRotate = bool( nTransformFlags & SdrGrafObjTransformsAttrs::ROTATE ) &&
+            (aGeo.nRotationAngle && aGeo.nRotationAngle != 18000);
+
+        // Need cropping info earlier
+        const_cast<SdrGrafObj*>(this)->ImpSetAttrToGrafInfo();
+
+        // Actually transform the graphic only in this case.
+        // Cropping always happens, though.
+        aActAttr = aGrafInfo;
+
+        if( bMirror )
+        {
+            sal_uInt16      nMirrorCase = ( aGeo.nRotationAngle == 18000 ) ? ( bMirrored ? 3 : 4 ) : ( bMirrored ? 2 : 1 );
+            bool bHMirr = nMirrorCase == 2 || nMirrorCase == 4;
+            bool bVMirr = nMirrorCase == 3 || nMirrorCase == 4;
+
+            aActAttr.SetMirrorFlags( ( bHMirr ? BmpMirrorFlags::Horizontal : BmpMirrorFlags::NONE ) | ( bVMirr ? BmpMirrorFlags::Vertical : BmpMirrorFlags::NONE ) );
+        }
+
+        if( bRotate )
+            aActAttr.SetRotation( sal_uInt16(aGeo.nRotationAngle / 10) );
+    }
+
+    return aActAttr;
+}
+
+bool SdrGrafObj::IsAnimated() const
+{
+    return mpGraphicObject->IsAnimated();
+}
+
+bool SdrGrafObj::IsEPS() const
+{
+    return mpGraphicObject->IsEPS();
+}
+
+MapMode SdrGrafObj::GetGrafPrefMapMode() const
+{
+    return mpGraphicObject->GetPrefMapMode();
+}
+
+Size SdrGrafObj::GetGrafPrefSize() const
+{
+    return mpGraphicObject->GetPrefSize();
+}
+
+void SdrGrafObj::SetGrafStreamURL( const OUString& rGraphicStreamURL )
+{
+    if( rGraphicStreamURL.isEmpty() )
+    {
+        mpGraphicObject->SetUserData();
+    }
+    else if(getSdrModelFromSdrObject().IsSwapGraphics() )
+    {
+        mpGraphicObject->SetUserData( rGraphicStreamURL );
+    }
+}
+
+OUString const & SdrGrafObj::GetGrafStreamURL() const
+{
+    return mpGraphicObject->GetUserData();
+}
+
+Size SdrGrafObj::getOriginalSize() const
+{
+    Size aSize = GetGrafPrefSize();
+
+    if (aGrafInfo.IsCropped())
+    {
+        const long aCroppedTop(OutputDevice::LogicToLogic(aGrafInfo.GetTopCrop(), getSdrModelFromSdrObject().GetScaleUnit(), GetGrafPrefMapMode().GetMapUnit()));
+        const long aCroppedBottom(OutputDevice::LogicToLogic(aGrafInfo.GetBottomCrop(), getSdrModelFromSdrObject().GetScaleUnit(), GetGrafPrefMapMode().GetMapUnit()));
+        const long aCroppedLeft(OutputDevice::LogicToLogic(aGrafInfo.GetLeftCrop(), getSdrModelFromSdrObject().GetScaleUnit(), GetGrafPrefMapMode().GetMapUnit()));
+        const long aCroppedRight(OutputDevice::LogicToLogic(aGrafInfo.GetRightCrop(), getSdrModelFromSdrObject().GetScaleUnit(), GetGrafPrefMapMode().GetMapUnit()));
+        const long aCroppedWidth(aSize.getWidth() - aCroppedLeft + aCroppedRight);
+        const long aCroppedHeight(aSize.getHeight() - aCroppedTop + aCroppedBottom);
+
+        aSize = Size ( aCroppedWidth, aCroppedHeight);
+    }
+
+    if ( GetGrafPrefMapMode().GetMapUnit() == MapUnit::MapPixel )
+        aSize = Application::GetDefaultDevice()->PixelToLogic(aSize, MapMode(getSdrModelFromSdrObject().GetScaleUnit()));
+    else
+        aSize = OutputDevice::LogicToLogic(aSize, GetGrafPrefMapMode(), MapMode(getSdrModelFromSdrObject().GetScaleUnit()));
+
+    return aSize;
+}
+
+// TODO Remove
+void SdrGrafObj::ForceSwapIn() const
+{
+    if (pGraphicLink && (mpGraphicObject->GetType() == GraphicType::NONE  ||
+                         mpGraphicObject->GetType() == GraphicType::Default) )
+    {
+        pGraphicLink->Update();
+    }
+}
+
+void SdrGrafObj::ImpRegisterLink()
+{
+    sfx2::LinkManager* pLinkManager(getSdrModelFromSdrObject().GetLinkManager());
+
+    if( pLinkManager != nullptr && pGraphicLink == nullptr )
+    {
+        if (!aFileName.isEmpty())
+        {
+            pGraphicLink = new SdrGraphicLink( *this );
+            pLinkManager->InsertFileLink(
+                *pGraphicLink, sfx2::SvBaseLinkObjectType::ClientGraphic, aFileName, (aFilterName.isEmpty() ? nullptr : &aFilterName));
+            pGraphicLink->Connect();
+        }
+    }
+}
+
+void SdrGrafObj::ImpDeregisterLink()
+{
+    sfx2::LinkManager* pLinkManager(getSdrModelFromSdrObject().GetLinkManager());
+
+    if( pLinkManager != nullptr && pGraphicLink!=nullptr)
+    {
+        // When using Remove, the *pGraphicLink is implicitly deleted
+        pLinkManager->Remove( pGraphicLink );
+        pGraphicLink=nullptr;
+    }
+}
+
+void SdrGrafObj::SetGraphicLink(const OUString& rFileName, const OUString& /*rReferer*/, const OUString& /*rFilterName*/)
+{
+    Graphic aGraphic;
+    aGraphic.setOriginURL(rFileName);
+    SetGraphic(aGraphic);
+}
+
+void SdrGrafObj::ReleaseGraphicLink()
+{
+    ImpDeregisterLink();
+    aFileName.clear();
+    aReferer.clear();
+    aFilterName.clear();
+}
+
+bool SdrGrafObj::IsLinkedGraphic() const
+{
+    return !mpGraphicObject->GetGraphic().getOriginURL().isEmpty();
+}
+
+void SdrGrafObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    bool bNoPresGrf = ( mpGraphicObject->GetType() != GraphicType::NONE ) && !bEmptyPresObj;
+
+    rInfo.bResizeFreeAllowed = aGeo.nRotationAngle % 9000 == 0 ||
+                               aGeo.nRotationAngle % 18000 == 0 ||
+                               aGeo.nRotationAngle % 27000 == 0;
+
+    rInfo.bResizePropAllowed = true;
+    rInfo.bRotateFreeAllowed = bNoPresGrf;
+    rInfo.bRotate90Allowed = bNoPresGrf;
+    rInfo.bMirrorFreeAllowed = bNoPresGrf;
+    rInfo.bMirror45Allowed = bNoPresGrf;
+    rInfo.bMirror90Allowed = !bEmptyPresObj;
+    rInfo.bTransparenceAllowed = false;
+
+    // #i118485# Shear allowed and possible now
+    rInfo.bShearAllowed = true;
+
+    rInfo.bEdgeRadiusAllowed=false;
+    rInfo.bCanConvToPath = !IsEPS();
+    rInfo.bCanConvToPathLineToArea = false;
+    rInfo.bCanConvToPolyLineToArea = false;
+    rInfo.bCanConvToPoly = !IsEPS();
+    rInfo.bCanConvToContour = (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary());
+}
+
+sal_uInt16 SdrGrafObj::GetObjIdentifier() const
+{
+    return sal_uInt16( OBJ_GRAF );
+}
+
+void SdrGrafObj::ImpSetLinkedGraphic( const Graphic& rGraphic )
+{
+    const bool bIsChanged(getSdrModelFromSdrObject().IsChanged());
+    NbcSetGraphic( rGraphic );
+    ActionChanged();
+    BroadcastObjectChange();
+    getSdrModelFromSdrObject().SetChanged(bIsChanged);
+}
+
+OUString SdrGrafObj::TakeObjNameSingul() const
+{
+    if (!mpGraphicObject)
+        return OUString();
+
+    auto const & rVectorGraphicDataPtr = mpGraphicObject->GetGraphic().getVectorGraphicData();
+
+    OUStringBuffer sName;
+
+    if (rVectorGraphicDataPtr)
+    {
+        switch (rVectorGraphicDataPtr->getVectorGraphicDataType())
+        {
+        case VectorGraphicDataType::Wmf:
+        {
+            sName.append(SvxResId(STR_ObjNameSingulGRAFWMF));
+            break;
+        }
+        case VectorGraphicDataType::Emf:
+        {
+            sName.append(SvxResId(STR_ObjNameSingulGRAFEMF));
+            break;
+        }
+        default: // case VectorGraphicDataType::Svg:
+        {
+            sName.append(SvxResId(STR_ObjNameSingulGRAFSVG));
+            break;
+        }
+        }
+    }
+    else
+    {
+        switch( mpGraphicObject->GetType() )
+        {
+            case GraphicType::Bitmap:
+            {
+                const char* pId = ( ( mpGraphicObject->IsTransparent() || GetObjectItem( SDRATTR_GRAFTRANSPARENCE ).GetValue() ) ?
+                                     ( IsLinkedGraphic() ? STR_ObjNameSingulGRAFBMPTRANSLNK : STR_ObjNameSingulGRAFBMPTRANS ) :
+                                     ( IsLinkedGraphic() ? STR_ObjNameSingulGRAFBMPLNK : STR_ObjNameSingulGRAFBMP ) );
+
+                sName.append(SvxResId(pId));
+            }
+            break;
+
+            case GraphicType::GdiMetafile:
+                sName.append(SvxResId(IsLinkedGraphic() ? STR_ObjNameSingulGRAFMTFLNK : STR_ObjNameSingulGRAFMTF));
+            break;
+
+            case GraphicType::NONE:
+                sName.append(SvxResId(IsLinkedGraphic() ? STR_ObjNameSingulGRAFNONELNK : STR_ObjNameSingulGRAFNONE));
+            break;
+
+            default:
+                sName.append(SvxResId(IsLinkedGraphic() ? STR_ObjNameSingulGRAFLNK : STR_ObjNameSingulGRAF));
+            break;
+        }
+    }
+
+    const OUString aName(GetName());
+
+    if (!aName.isEmpty())
+    {
+        sName.append(" '");
+        sName.append(aName);
+        sName.append('\'' );
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrGrafObj::TakeObjNamePlural() const
+{
+    if (!mpGraphicObject)
+        return OUString();
+
+    auto const & rVectorGraphicDataPtr = mpGraphicObject->GetGraphic().getVectorGraphicData();
+
+    OUStringBuffer sName;
+
+    if (rVectorGraphicDataPtr)
+    {
+        switch (rVectorGraphicDataPtr->getVectorGraphicDataType())
+        {
+        case VectorGraphicDataType::Wmf:
+        {
+            sName.append(SvxResId(STR_ObjNamePluralGRAFWMF));
+            break;
+        }
+        case VectorGraphicDataType::Emf:
+        {
+            sName.append(SvxResId(STR_ObjNamePluralGRAFEMF));
+            break;
+        }
+        default: // case VectorGraphicDataType::Svg:
+        {
+            sName.append(SvxResId(STR_ObjNamePluralGRAFSVG));
+            break;
+        }
+        }
+    }
+    else
+    {
+        switch(mpGraphicObject->GetType())
+        {
+            case GraphicType::Bitmap:
+            {
+                const char* pId = ( ( mpGraphicObject->IsTransparent() || GetObjectItem( SDRATTR_GRAFTRANSPARENCE ).GetValue() ) ?
+                                     ( IsLinkedGraphic() ? STR_ObjNamePluralGRAFBMPTRANSLNK : STR_ObjNamePluralGRAFBMPTRANS ) :
+                                     ( IsLinkedGraphic() ? STR_ObjNamePluralGRAFBMPLNK : STR_ObjNamePluralGRAFBMP ) );
+
+                sName.append(SvxResId(pId));
+            }
+            break;
+
+            case GraphicType::GdiMetafile:
+                sName.append(SvxResId(IsLinkedGraphic() ? STR_ObjNamePluralGRAFMTFLNK : STR_ObjNamePluralGRAFMTF));
+            break;
+
+            case GraphicType::NONE:
+                sName.append(SvxResId(IsLinkedGraphic() ? STR_ObjNamePluralGRAFNONELNK : STR_ObjNamePluralGRAFNONE));
+            break;
+
+            default:
+                sName.append(SvxResId(IsLinkedGraphic() ? STR_ObjNamePluralGRAFLNK : STR_ObjNamePluralGRAF));
+            break;
+        }
+    }
+
+    const OUString aName(GetName());
+
+    if (!aName.isEmpty())
+    {
+        sName.append(" '");
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+SdrObjectUniquePtr SdrGrafObj::getFullDragClone() const
+{
+    // call parent
+    SdrObjectUniquePtr pRetval = SdrRectObj::getFullDragClone();
+
+    // #i103116# the full drag clone leads to problems
+    // with linked graphics, so reset the link in this
+    // temporary interaction object and load graphic
+    if(pRetval && IsLinkedGraphic())
+    {
+        static_cast< SdrGrafObj* >(pRetval.get())->ReleaseGraphicLink();
+    }
+
+    return pRetval;
+}
+
+SdrGrafObj* SdrGrafObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrGrafObj >(rTargetModel);
+}
+
+SdrGrafObj& SdrGrafObj::operator=( const SdrGrafObj& rObj )
+{
+    if( this == &rObj )
+        return *this;
+    SdrRectObj::operator=( rObj );
+
+    aFileName = rObj.aFileName;
+    aFilterName = rObj.aFilterName;
+    bMirrored = rObj.bMirrored;
+
+    mbIsSignatureLine = rObj.mbIsSignatureLine;
+    maSignatureLineId = rObj.maSignatureLineId;
+    maSignatureLineSuggestedSignerName = rObj.maSignatureLineSuggestedSignerName;
+    maSignatureLineSuggestedSignerTitle = rObj.maSignatureLineSuggestedSignerTitle;
+    maSignatureLineSuggestedSignerEmail = rObj.maSignatureLineSuggestedSignerEmail;
+    maSignatureLineSigningInstructions = rObj.maSignatureLineSigningInstructions;
+    mbIsSignatureLineShowSignDate = rObj.mbIsSignatureLineShowSignDate;
+    mbIsSignatureLineCanAddComment = rObj.mbIsSignatureLineCanAddComment;
+    mbSignatureLineIsSigned = false;
+    mpSignatureLineUnsignedGraphic = rObj.mpSignatureLineUnsignedGraphic;
+
+    if(rObj.mpQrCode)
+    {
+        mpQrCode = std::make_unique<css::drawing::QRCode>(*rObj.mpQrCode);
+    }
+    else
+    {
+        mpQrCode.reset();
+    }
+
+    if (mbIsSignatureLine && rObj.mpSignatureLineUnsignedGraphic)
+        mpGraphicObject->SetGraphic(rObj.mpSignatureLineUnsignedGraphic);
+    else
+        mpGraphicObject->SetGraphic( rObj.GetGraphic(), &rObj.GetGraphicObject() );
+
+    if( rObj.IsLinkedGraphic() )
+    {
+        SetGraphicLink( aFileName, rObj.aReferer, aFilterName );
+    }
+
+    ImpSetAttrToGrafInfo();
+    return *this;
+}
+
+sal_uInt32 SdrGrafObj::GetHdlCount() const
+{
+    return 8;
+}
+
+void SdrGrafObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    SdrHdlList tempList(nullptr);
+    SdrRectObj::AddToHdlList( tempList );
+    tempList.RemoveHdl(0);
+    tempList.MoveTo(rHdlList);
+}
+
+void SdrGrafObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    SdrRectObj::NbcResize( rRef, xFact, yFact );
+
+    bool bMirrX = xFact.GetNumerator() < 0;
+    bool bMirrY = yFact.GetNumerator() < 0;
+
+    if( bMirrX != bMirrY )
+        bMirrored = !bMirrored;
+}
+
+void SdrGrafObj::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    SdrRectObj::NbcMirror(rRef1,rRef2);
+    bMirrored = !bMirrored;
+}
+
+SdrObjGeoData* SdrGrafObj::NewGeoData() const
+{
+    return new SdrGrafObjGeoData;
+}
+
+void SdrGrafObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrRectObj::SaveGeoData(rGeo);
+    SdrGrafObjGeoData& rGGeo=static_cast<SdrGrafObjGeoData&>(rGeo);
+    rGGeo.bMirrored=bMirrored;
+}
+
+void SdrGrafObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrRectObj::RestGeoData(rGeo);
+    const SdrGrafObjGeoData& rGGeo=static_cast<const SdrGrafObjGeoData&>(rGeo);
+    bMirrored=rGGeo.bMirrored;
+}
+
+void SdrGrafObj::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage)
+{
+    const bool bRemove(pNewPage == nullptr && pOldPage != nullptr);
+    const bool bInsert(pNewPage != nullptr && pOldPage == nullptr);
+
+    if( bRemove )
+    {
+        // No SwapIn necessary here, because if something's not loaded, it can't be animated either.
+        if( mpGraphicObject->IsAnimated())
+            mpGraphicObject->StopAnimation();
+
+        if( pGraphicLink != nullptr )
+            ImpDeregisterLink();
+    }
+
+    // call parent
+    SdrRectObj::handlePageChange(pOldPage, pNewPage);
+
+    if (!aFileName.isEmpty() && bInsert)
+    {
+        ImpRegisterLink();
+    }
+}
+
+void SdrGrafObj::StartAnimation()
+{
+    SetGrafAnimationAllowed(true);
+}
+
+bool SdrGrafObj::HasGDIMetaFile() const
+{
+    return( mpGraphicObject->GetType() == GraphicType::GdiMetafile );
+}
+
+bool SdrGrafObj::isEmbeddedVectorGraphicData() const
+{
+    return GraphicType::Bitmap == GetGraphicType() && GetGraphic().getVectorGraphicData();
+}
+
+GDIMetaFile SdrGrafObj::getMetafileFromEmbeddedVectorGraphicData() const
+{
+    GDIMetaFile aRetval;
+
+    if(isEmbeddedVectorGraphicData())
+    {
+        ScopedVclPtrInstance< VirtualDevice > pOut;
+        const tools::Rectangle aBoundRect(GetCurrentBoundRect());
+        const MapMode aMap(
+            getSdrModelFromSdrObject().GetScaleUnit(),
+            Point(),
+            getSdrModelFromSdrObject().GetScaleFraction(),
+            getSdrModelFromSdrObject().GetScaleFraction());
+
+        pOut->EnableOutput(false);
+        pOut->SetMapMode(aMap);
+        aRetval.Record(pOut);
+        SingleObjectPainter(*pOut);
+        aRetval.Stop();
+        aRetval.WindStart();
+        aRetval.Move(-aBoundRect.Left(), -aBoundRect.Top());
+        aRetval.SetPrefMapMode(aMap);
+        aRetval.SetPrefSize(aBoundRect.GetSize());
+    }
+
+    return aRetval;
+}
+
+GDIMetaFile SdrGrafObj::GetMetaFile(GraphicType &rGraphicType) const
+{
+    if (isEmbeddedVectorGraphicData())
+    {
+        // Embedded Vector Graphic Data
+        // There is currently no helper to create SdrObjects from primitives (even if I'm thinking
+        // about writing one for some time). To get the roundtrip to SdrObjects it is necessary to
+        // use the old converter path over the MetaFile mechanism. Create Metafile from Svg
+        // primitives here pretty directly
+        rGraphicType = GraphicType::GdiMetafile;
+        return getMetafileFromEmbeddedVectorGraphicData();
+    }
+    else if (GraphicType::GdiMetafile == rGraphicType)
+    {
+        return GetTransformedGraphic(SdrGrafObjTransformsAttrs::MIRROR).GetGDIMetaFile();
+    }
+    return GDIMetaFile();
+}
+
+sal_Int32 SdrGrafObj::getEmbeddedPageNumber() const
+{
+   return mpGraphicObject->GetGraphic().getPageNumber();
+}
+
+SdrObjectUniquePtr SdrGrafObj::DoConvertToPolyObj(bool bBezier, bool bAddText ) const
+{
+    SdrObject* pRetval = nullptr;
+    GraphicType aGraphicType(GetGraphicType());
+    GDIMetaFile aMtf(GetMetaFile(aGraphicType));
+    switch(aGraphicType)
+    {
+        case GraphicType::GdiMetafile:
+        {
+            // Sort into group and return ONLY those objects that can be created from the MetaFile.
+            ImpSdrGDIMetaFileImport aFilter(
+                getSdrModelFromSdrObject(),
+                GetLayer(),
+                maRect);
+            SdrObjGroup* pGrp = new SdrObjGroup(getSdrModelFromSdrObject());
+
+            if(aFilter.DoImport(aMtf, *pGrp->GetSubList(), 0))
+            {
+                {
+                        // copy transformation
+                    GeoStat aGeoStat(GetGeoStat());
+
+                    if(aGeoStat.nShearAngle)
+                    {
+                        aGeoStat.RecalcTan();
+                        pGrp->NbcShear(maRect.TopLeft(), aGeoStat.nShearAngle, aGeoStat.nTan, false);
+                    }
+
+                    if(aGeoStat.nRotationAngle)
+                    {
+                        aGeoStat.RecalcSinCos();
+                        pGrp->NbcRotate(maRect.TopLeft(), aGeoStat.nRotationAngle, aGeoStat.nSin, aGeoStat.nCos);
+                    }
+                }
+
+                pRetval = pGrp;
+                pGrp->NbcSetLayer(GetLayer());
+
+                if(bAddText)
+                {
+                    pRetval = ImpConvertAddText(SdrObjectUniquePtr(pRetval), bBezier).release();
+                }
+
+                // convert all children
+                if( pRetval )
+                {
+                    SdrObject* pHalfDone = pRetval;
+                    pRetval = pRetval->DoConvertToPolyObj(bBezier, bAddText).release();
+                    SdrObject::Free( pHalfDone ); // resulting object is newly created
+
+                    if( pRetval )
+                    {
+                        // flatten subgroups. As we call
+                        // DoConvertToPolyObj() on the resulting group
+                        // objects, subgroups can exist (e.g. text is
+                        // a group object for every line).
+                        SdrObjList* pList = pRetval->GetSubList();
+                        if( pList )
+                            pList->FlattenGroups();
+                    }
+                }
+            }
+            else
+            {
+                // always use SdrObject::Free(...) for SdrObjects (!)
+                SdrObject* pTemp(pGrp);
+                SdrObject::Free(pTemp);
+            }
+
+            // #i118485# convert line and fill
+            SdrObjectUniquePtr pLineFill = SdrRectObj::DoConvertToPolyObj(bBezier, false);
+
+            if(pLineFill)
+            {
+                if(pRetval)
+                {
+                    pGrp = dynamic_cast< SdrObjGroup* >(pRetval);
+
+                    if(!pGrp)
+                    {
+                        pGrp = new SdrObjGroup(getSdrModelFromSdrObject());
+                        pGrp->NbcSetLayer(GetLayer());
+                        pGrp->GetSubList()->NbcInsertObject(pRetval);
+                    }
+
+                    pGrp->GetSubList()->NbcInsertObject(pLineFill.release(), 0);
+                }
+                else
+                {
+                    pRetval = pLineFill.release();
+                }
+            }
+
+            break;
+        }
+        case GraphicType::Bitmap:
+        {
+            // create basic object and add fill
+            pRetval = SdrRectObj::DoConvertToPolyObj(bBezier, bAddText).release();
+
+            // save bitmap as an attribute
+            if(pRetval)
+            {
+                // retrieve bitmap for the fill
+                SfxItemSet aSet(GetObjectItemSet());
+
+                aSet.Put(XFillStyleItem(drawing::FillStyle_BITMAP));
+                const BitmapEx aBitmapEx(GetTransformedGraphic().GetBitmapEx());
+                aSet.Put(XFillBitmapItem(OUString(), Graphic(aBitmapEx)));
+                aSet.Put(XFillBmpTileItem(false));
+
+                pRetval->SetMergedItemSet(aSet);
+            }
+            break;
+        }
+        case GraphicType::NONE:
+        case GraphicType::Default:
+        {
+            pRetval = SdrRectObj::DoConvertToPolyObj(bBezier, bAddText).release();
+            break;
+        }
+    }
+
+    return SdrObjectUniquePtr(pRetval);
+}
+
+void SdrGrafObj::Notify( SfxBroadcaster& rBC, const SfxHint& rHint )
+{
+    SetXPolyDirty();
+    SdrRectObj::Notify( rBC, rHint );
+    ImpSetAttrToGrafInfo();
+}
+
+
+void SdrGrafObj::SetMirrored( bool _bMirrored )
+{
+    bMirrored = _bMirrored;
+}
+
+void SdrGrafObj::ImpSetAttrToGrafInfo()
+{
+    const SfxItemSet& rSet = GetObjectItemSet();
+    const sal_uInt16 nTrans = rSet.Get( SDRATTR_GRAFTRANSPARENCE ).GetValue();
+    const SdrGrafCropItem&  rCrop = rSet.Get( SDRATTR_GRAFCROP );
+
+    aGrafInfo.SetLuminance( rSet.Get( SDRATTR_GRAFLUMINANCE ).GetValue() );
+    aGrafInfo.SetContrast( rSet.Get( SDRATTR_GRAFCONTRAST ).GetValue() );
+    aGrafInfo.SetChannelR( rSet.Get( SDRATTR_GRAFRED ).GetValue() );
+    aGrafInfo.SetChannelG( rSet.Get( SDRATTR_GRAFGREEN ).GetValue() );
+    aGrafInfo.SetChannelB( rSet.Get( SDRATTR_GRAFBLUE ).GetValue() );
+    aGrafInfo.SetGamma( rSet.Get( SDRATTR_GRAFGAMMA ).GetValue() * 0.01 );
+    aGrafInfo.SetTransparency( static_cast<sal_uInt8>(FRound( std::min( nTrans, sal_uInt16(100) )  * 2.55 )) );
+    aGrafInfo.SetInvert( rSet.Get( SDRATTR_GRAFINVERT ).GetValue() );
+    aGrafInfo.SetDrawMode( rSet.Get( SDRATTR_GRAFMODE ).GetValue() );
+    aGrafInfo.SetCrop( rCrop.GetLeft(), rCrop.GetTop(), rCrop.GetRight(), rCrop.GetBottom() );
+
+    SetXPolyDirty();
+    SetRectsDirty();
+}
+
+void SdrGrafObj::AdjustToMaxRect( const tools::Rectangle& rMaxRect, bool bShrinkOnly )
+{
+    Size aSize;
+    Size aMaxSize( rMaxRect.GetSize() );
+    if (mpGraphicObject->GetPrefMapMode().GetMapUnit() == MapUnit::MapPixel)
+        aSize = Application::GetDefaultDevice()->PixelToLogic(mpGraphicObject->GetPrefSize(), MapMode(MapUnit::Map100thMM));
+    else
+        aSize = OutputDevice::LogicToLogic( mpGraphicObject->GetPrefSize(),
+                                            mpGraphicObject->GetPrefMapMode(),
+                                            MapMode( MapUnit::Map100thMM ) );
+
+    if( !aSize.IsEmpty() )
+    {
+        Point aPos( rMaxRect.TopLeft() );
+
+        // if the graphic is too large, fit it to page
+        if ( (!bShrinkOnly                          ||
+             ( aSize.Height() > aMaxSize.Height() ) ||
+             ( aSize.Width()  > aMaxSize.Width()  ) )&&
+             aSize.Height() && aMaxSize.Height() )
+        {
+            float fGrfWH =  static_cast<float>(aSize.Width()) /
+                            static_cast<float>(aSize.Height());
+            float fWinWH =  static_cast<float>(aMaxSize.Width()) /
+                            static_cast<float>(aMaxSize.Height());
+
+            // Scale graphic to page size
+            if ( fGrfWH < fWinWH )
+            {
+                aSize.setWidth( static_cast<long>(aMaxSize.Height() * fGrfWH) );
+                aSize.setHeight( aMaxSize.Height() );
+            }
+            else if ( fGrfWH > 0.F )
+            {
+                aSize.setWidth( aMaxSize.Width() );
+                aSize.setHeight( static_cast<long>(aMaxSize.Width() / fGrfWH) );
+            }
+
+            aPos = rMaxRect.Center();
+        }
+
+        if( bShrinkOnly )
+            aPos = maRect.TopLeft();
+
+        aPos.AdjustX( -(aSize.Width() / 2) );
+        aPos.AdjustY( -(aSize.Height() / 2) );
+        SetLogicRect( tools::Rectangle( aPos, aSize ) );
+    }
+}
+
+void SdrGrafObj::SetGrafAnimationAllowed(bool bNew)
+{
+    if(mbGrafAnimationAllowed != bNew)
+    {
+        mbGrafAnimationAllowed = bNew;
+        ActionChanged();
+    }
+}
+
+Reference< XInputStream > SdrGrafObj::getInputStream() const
+{
+    Reference< XInputStream > xStream;
+
+    if (mpGraphicObject && GetGraphic().IsGfxLink())
+    {
+        Graphic aGraphic( GetGraphic() );
+        GfxLink aLink( aGraphic.GetGfxLink() );
+        sal_uInt32 nSize = aLink.GetDataSize();
+        const void* pSourceData = static_cast<const void*>(aLink.GetData());
+        if( nSize && pSourceData )
+        {
+            sal_uInt8 * pBuffer = new sal_uInt8[ nSize ];
+            memcpy( pBuffer, pSourceData, nSize );
+
+            SvMemoryStream* pStream = new SvMemoryStream( static_cast<void*>(pBuffer), static_cast<std::size_t>(nSize), StreamMode::READ );
+            pStream->ObjectOwnsMemory( true );
+            xStream.set( new utl::OInputStreamWrapper( pStream, true ) );
+        }
+    }
+
+    if (!xStream.is() && !aFileName.isEmpty())
+    {
+        SvFileStream* pStream = new SvFileStream( aFileName, StreamMode::READ );
+        xStream.set( new utl::OInputStreamWrapper( pStream ) );
+    }
+
+    return xStream;
+}
+
+// moved crop handle creation here; this is the object type using them
+void SdrGrafObj::addCropHandles(SdrHdlList& rTarget) const
+{
+    basegfx::B2DHomMatrix aMatrix;
+    basegfx::B2DPolyPolygon aPolyPolygon;
+
+    // get object transformation
+    TRGetBaseGeometry(aMatrix, aPolyPolygon);
+
+    // part of object transformation correction, but used later, so defined outside next scope
+    double fShearX(0.0), fRotate(0.0);
+
+    {   // TTTT correct shear, it comes currently mirrored from TRGetBaseGeometry, can be removed with aw080
+        basegfx::B2DTuple aScale;
+        basegfx::B2DTuple aTranslate;
+
+        aMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+
+        if(!basegfx::fTools::equalZero(fShearX))
+        {
+            // shearX is used, correct it
+            fShearX = -fShearX;
+        }
+
+        aMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+            aScale,
+            fShearX,
+            fRotate,
+            aTranslate);
+    }
+
+    // get crop values
+    const SdrGrafCropItem& rCrop = GetMergedItem(SDRATTR_GRAFCROP);
+
+    if(rCrop.GetLeft() || rCrop.GetTop() || rCrop.GetRight() ||rCrop.GetBottom())
+    {
+        // decompose object transformation to have current translate and scale
+        basegfx::B2DVector aScale, aTranslate;
+        double fLclRotate, fLclShearX;
+
+        aMatrix.decompose(aScale, aTranslate, fLclRotate, fLclShearX);
+
+        if(!aScale.equalZero())
+        {
+            // get crop scale
+            const basegfx::B2DVector aCropScaleFactor(
+                GetGraphicObject().calculateCropScaling(
+                    aScale.getX(),
+                    aScale.getY(),
+                    rCrop.GetLeft(),
+                    rCrop.GetTop(),
+                    rCrop.GetRight(),
+                    rCrop.GetBottom()));
+
+            // apply crop scale
+            const double fCropLeft(rCrop.GetLeft() * aCropScaleFactor.getX());
+            const double fCropTop(rCrop.GetTop() * aCropScaleFactor.getY());
+            const double fCropRight(rCrop.GetRight() * aCropScaleFactor.getX());
+            const double fCropBottom(rCrop.GetBottom() * aCropScaleFactor.getY());
+            basegfx::B2DHomMatrix aMatrixForCropViewHdl(aMatrix);
+
+            if(IsMirrored())
+            {
+                // create corrected new matrix, TTTT can be removed with aw080
+                // the old mirror only can mirror horizontally; the vertical mirror
+                // is faked by using the horizontal and 180 degree rotation. Since
+                // the object can be rotated differently from 180 degree, this is
+                // not safe to detect. Just correct horizontal mirror (which is
+                // in IsMirrored()) and keep the rotation angle
+                // caution: Do not modify aMatrix, it is used below to calculate
+                // the exact handle positions
+                basegfx::B2DHomMatrix aPreMultiply;
+
+                // mirrored X, apply
+                aPreMultiply.translate(-0.5, 0.0);
+                aPreMultiply.scale(-1.0, 1.0);
+                aPreMultiply.translate(0.5, 0.0);
+
+                aMatrixForCropViewHdl = aMatrixForCropViewHdl * aPreMultiply;
+            }
+
+            rTarget.AddHdl(
+                std::make_unique<SdrCropViewHdl>(
+                    aMatrixForCropViewHdl,
+                    GetGraphicObject().GetGraphic(),
+                    fCropLeft,
+                    fCropTop,
+                    fCropRight,
+                    fCropBottom));
+        }
+    }
+
+    basegfx::B2DPoint aPos;
+
+    aPos = aMatrix * basegfx::B2DPoint(0.0, 0.0);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::UpperLeft, fShearX, fRotate));
+    aPos = aMatrix * basegfx::B2DPoint(0.5, 0.0);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::Upper, fShearX, fRotate));
+    aPos = aMatrix * basegfx::B2DPoint(1.0, 0.0);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::UpperRight, fShearX, fRotate));
+    aPos = aMatrix * basegfx::B2DPoint(0.0, 0.5);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::Left , fShearX, fRotate));
+    aPos = aMatrix * basegfx::B2DPoint(1.0, 0.5);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::Right, fShearX, fRotate));
+    aPos = aMatrix * basegfx::B2DPoint(0.0, 1.0);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::LowerLeft, fShearX, fRotate));
+    aPos = aMatrix * basegfx::B2DPoint(0.5, 1.0);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::Lower, fShearX, fRotate));
+    aPos = aMatrix * basegfx::B2DPoint(1.0, 1.0);
+    rTarget.AddHdl(std::make_unique<SdrCropHdl>(Point(basegfx::fround(aPos.getX()), basegfx::fround(aPos.getY())), SdrHdlKind::LowerRight, fShearX, fRotate));
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdogrp.cxx b/svx/source/svdraw/svdogrp.cxx
new file mode 100644
index 000000000..0ee6ef6a8
--- /dev/null
+++ b/svx/source/svdraw/svdogrp.cxx
@@ -0,0 +1,791 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdogrp.hxx>
+
+#include <svx/svdmodel.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+
+#include <sdr/properties/groupproperties.hxx>
+#include <sdr/contact/viewcontactofgroup.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <libxml/xmlwriter.h>
+#include <rtl/ustrbuf.hxx>
+#include <vcl/canvastools.hxx>
+
+// BaseProperties section
+std::unique_ptr<sdr::properties::BaseProperties> SdrObjGroup::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::GroupProperties>(*this);
+}
+
+// DrawContact section
+std::unique_ptr<sdr::contact::ViewContact> SdrObjGroup::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfGroup>(*this);
+}
+
+SdrObjGroup::SdrObjGroup(SdrModel& rSdrModel)
+:   SdrObject(rSdrModel),
+    SdrObjList(),
+    aRefPoint(0, 0)
+{
+    bClosedObj=false;
+}
+
+SdrObjGroup::~SdrObjGroup()
+{
+}
+
+SdrPage* SdrObjGroup::getSdrPageFromSdrObjList() const
+{
+    return getSdrPageFromSdrObject();
+}
+
+SdrObject* SdrObjGroup::getSdrObjectFromSdrObjList() const
+{
+    return const_cast< SdrObjGroup* >(this);
+}
+
+SdrObjList* SdrObjGroup::getChildrenOfSdrObject() const
+{
+    return const_cast< SdrObjGroup* >(this);
+}
+
+void SdrObjGroup::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bNoContortion=false;
+    const size_t nObjCount(GetObjCount());
+    for (size_t i=0; i<nObjCount; ++i) {
+        SdrObject* pObj(GetObj(i));
+        SdrObjTransformInfoRec aInfo;
+        pObj->TakeObjInfo(aInfo);
+        if (!aInfo.bMoveAllowed            ) rInfo.bMoveAllowed            =false;
+        if (!aInfo.bResizeFreeAllowed      ) rInfo.bResizeFreeAllowed      =false;
+        if (!aInfo.bResizePropAllowed      ) rInfo.bResizePropAllowed      =false;
+        if (!aInfo.bRotateFreeAllowed      ) rInfo.bRotateFreeAllowed      =false;
+        if (!aInfo.bRotate90Allowed        ) rInfo.bRotate90Allowed        =false;
+        if (!aInfo.bMirrorFreeAllowed      ) rInfo.bMirrorFreeAllowed      =false;
+        if (!aInfo.bMirror45Allowed        ) rInfo.bMirror45Allowed        =false;
+        if (!aInfo.bMirror90Allowed        ) rInfo.bMirror90Allowed        =false;
+        if (!aInfo.bShearAllowed           ) rInfo.bShearAllowed           =false;
+        if (!aInfo.bEdgeRadiusAllowed      ) rInfo.bEdgeRadiusAllowed      =false;
+        if (!aInfo.bNoOrthoDesired         ) rInfo.bNoOrthoDesired         =false;
+        if (aInfo.bNoContortion            ) rInfo.bNoContortion           =true;
+        if (!aInfo.bCanConvToPath          ) rInfo.bCanConvToPath          =false;
+
+        if(!aInfo.bCanConvToContour)
+            rInfo.bCanConvToContour = false;
+
+        if (!aInfo.bCanConvToPoly          ) rInfo.bCanConvToPoly          =false;
+        if (!aInfo.bCanConvToPathLineToArea) rInfo.bCanConvToPathLineToArea=false;
+        if (!aInfo.bCanConvToPolyLineToArea) rInfo.bCanConvToPolyLineToArea=false;
+    }
+    if (nObjCount==0) {
+        rInfo.bRotateFreeAllowed=false;
+        rInfo.bRotate90Allowed  =false;
+        rInfo.bMirrorFreeAllowed=false;
+        rInfo.bMirror45Allowed  =false;
+        rInfo.bMirror90Allowed  =false;
+        rInfo.bTransparenceAllowed = false;
+        rInfo.bShearAllowed     =false;
+        rInfo.bEdgeRadiusAllowed=false;
+        rInfo.bNoContortion     =true;
+    }
+    if(nObjCount != 1)
+    {
+        // only allowed if single object selected
+        rInfo.bTransparenceAllowed = false;
+    }
+}
+
+
+void SdrObjGroup::SetBoundRectDirty()
+{
+    // avoid resetting aOutRect which in case of this object is model data,
+    // not re-creatable view data
+}
+
+sal_uInt16 SdrObjGroup::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_GRUP);
+}
+
+
+SdrLayerID SdrObjGroup::GetLayer() const
+{
+    bool b1st = true;
+    SdrLayerID nLay = SdrObject::GetLayer();
+    const size_t nObjCount(GetObjCount());
+    for (size_t i=0; i<nObjCount; ++i) {
+        SdrLayerID nLay1(GetObj(i)->GetLayer());
+        if (b1st) { nLay=nLay1; b1st = false; }
+        else if (nLay1!=nLay) return SdrLayerID(0);
+    }
+    return nLay;
+}
+
+void SdrObjGroup::NbcSetLayer(SdrLayerID nLayer)
+{
+    SdrObject::NbcSetLayer(nLayer);
+    const size_t nObjCount(GetObjCount());
+    for (size_t i=0; i<nObjCount; ++i) {
+        GetObj(i)->NbcSetLayer(nLayer);
+    }
+}
+
+void SdrObjGroup::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage)
+{
+    // call parent
+    SdrObject::handlePageChange(pOldPage, pNewPage);
+
+    for(size_t i(0); i < GetObjCount(); i++)
+    {
+        GetObj(i)->handlePageChange(pOldPage, pNewPage);
+    }
+}
+
+SdrObjList* SdrObjGroup::GetSubList() const
+{
+    return const_cast< SdrObjGroup* >(this);
+}
+
+const tools::Rectangle& SdrObjGroup::GetCurrentBoundRect() const
+{
+    // <aOutRect> has to contain the bounding rectangle
+    if(0 != GetObjCount())
+    {
+        const_cast< SdrObjGroup* >(this)->aOutRect = GetAllObjBoundRect();
+    }
+
+    return aOutRect;
+}
+
+const tools::Rectangle& SdrObjGroup::GetSnapRect() const
+{
+    // <aOutRect> has to contain the bounding rectangle
+    if(0 != GetObjCount())
+    {
+        return GetAllObjSnapRect();
+    }
+    else
+    {
+        return aOutRect;
+    }
+}
+
+SdrObjGroup* SdrObjGroup::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrObjGroup >(rTargetModel);
+}
+
+SdrObjGroup& SdrObjGroup::operator=(const SdrObjGroup& rObj)
+{
+    if( this == &rObj )
+        return *this;
+
+    // copy SdrObject stuff
+    SdrObject::operator=(rObj);
+
+    // copy child SdrObjects
+    if(nullptr != rObj.GetSubList())
+    {
+        // #i36404# Copy SubList, init model and page first
+        const SdrObjList& rSourceSubList(*rObj.GetSubList());
+
+        CopyObjects(rSourceSubList);
+
+        // tdf#116979: needed here, we need bSnapRectDirty to be true
+        // which it is after using SdrObject::operator= (see above),
+        // but set to false again using CopyObjects
+        SetRectsDirty();
+    }
+
+    // copy local parameters
+    aRefPoint  = rObj.aRefPoint;
+    return *this;
+}
+
+
+OUString SdrObjGroup::TakeObjNameSingul() const
+{
+    OUStringBuffer sName;
+
+    if(0 == GetObjCount())
+    {
+        sName.append(SvxResId(STR_ObjNameSingulGRUPEMPTY));
+    }
+    else
+    {
+        sName.append(SvxResId(STR_ObjNameSingulGRUP));
+    }
+
+    const OUString aName(GetName());
+
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+
+OUString SdrObjGroup::TakeObjNamePlural() const
+{
+    if(0 == GetObjCount())
+        return SvxResId(STR_ObjNamePluralGRUPEMPTY);
+    return SvxResId(STR_ObjNamePluralGRUP);
+}
+
+
+void SdrObjGroup::RecalcSnapRect()
+{
+    // TODO: unnecessary, because we use the Rects from the SubList
+}
+
+basegfx::B2DPolyPolygon SdrObjGroup::TakeXorPoly() const
+{
+    basegfx::B2DPolyPolygon aRetval;
+    const size_t nObjCount(GetObjCount());
+
+    for(size_t a = 0; a < nObjCount; ++a)
+    {
+        SdrObject* pObj(GetObj(a));
+        aRetval.append(pObj->TakeXorPoly());
+    }
+
+    if(!aRetval.count())
+    {
+        const basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(aOutRect);
+        aRetval.append(basegfx::utils::createPolygonFromRect(aRange));
+    }
+
+    return aRetval;
+}
+
+bool SdrObjGroup::beginSpecialDrag(SdrDragStat& /*rDrag*/) const
+{
+    return false;
+}
+
+
+bool SdrObjGroup::BegCreate(SdrDragStat& /*rStat*/)
+{
+    return false;
+}
+
+
+long SdrObjGroup::GetRotateAngle() const
+{
+    long nRetval(0);
+
+    if(0 != GetObjCount())
+    {
+        SdrObject* pObj(GetObj(0));
+
+        nRetval = pObj->GetRotateAngle();
+    }
+
+    return nRetval;
+}
+
+
+long SdrObjGroup::GetShearAngle(bool /*bVertical*/) const
+{
+    long nRetval(0);
+
+    if(0 != GetObjCount())
+    {
+        SdrObject* pObj(GetObj(0));
+
+        nRetval = pObj->GetShearAngle();
+    }
+
+    return nRetval;
+}
+
+
+void SdrObjGroup::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aOld(GetSnapRect());
+    long nMulX=rRect.Right()-rRect.Left();
+    long nDivX=aOld.Right()-aOld.Left();
+    long nMulY=rRect.Bottom()-rRect.Top();
+    long nDivY=aOld.Bottom()-aOld.Top();
+    if (nDivX==0) { nMulX=1; nDivX=1; }
+    if (nDivY==0) { nMulY=1; nDivY=1; }
+    if (nMulX!=nDivX || nMulY!=nDivY) {
+        Fraction aX(nMulX,nDivX);
+        Fraction aY(nMulY,nDivY);
+        NbcResize(aOld.TopLeft(),aX,aY);
+    }
+    if (rRect.Left()!=aOld.Left() || rRect.Top()!=aOld.Top()) {
+        NbcMove(Size(rRect.Left()-aOld.Left(),rRect.Top()-aOld.Top()));
+    }
+}
+
+
+void SdrObjGroup::NbcSetLogicRect(const tools::Rectangle& rRect)
+{
+    NbcSetSnapRect(rRect);
+}
+
+
+void SdrObjGroup::NbcMove(const Size& rSiz)
+{
+    aRefPoint.Move(rSiz);
+    const size_t nObjCount(GetObjCount());
+
+    if(0 != nObjCount)
+    {
+        for (size_t i=0; i<nObjCount; ++i)
+        {
+            SdrObject* pObj(GetObj(i));
+            pObj->NbcMove(rSiz);
+        }
+    }
+    else
+    {
+        aOutRect.Move(rSiz);
+        SetRectsDirty();
+    }
+}
+
+
+void SdrObjGroup::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0);
+    bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0);
+    if (bXMirr || bYMirr) {
+        Point aRef1(GetSnapRect().Center());
+        if (bXMirr) {
+            Point aRef2(aRef1);
+            aRef2.AdjustY( 1 );
+            NbcMirrorGluePoints(aRef1,aRef2);
+        }
+        if (bYMirr) {
+            Point aRef2(aRef1);
+            aRef2.AdjustX( 1 );
+            NbcMirrorGluePoints(aRef1,aRef2);
+        }
+    }
+
+    ResizePoint(aRefPoint,rRef,xFact,yFact);
+
+    const size_t nObjCount(GetObjCount());
+    if(0 != nObjCount)
+    {
+        for (size_t i=0; i<nObjCount; ++i)
+        {
+            SdrObject* pObj(GetObj(i));
+            pObj->NbcResize(rRef,xFact,yFact);
+        }
+    }
+    else
+    {
+        ResizeRect(aOutRect,rRef,xFact,yFact);
+        SetRectsDirty();
+    }
+}
+
+
+void SdrObjGroup::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    SetGlueReallyAbsolute(true);
+    RotatePoint(aRefPoint,rRef,sn,cs);
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        pObj->NbcRotate(rRef,nAngle,sn,cs);
+    }
+
+    NbcRotateGluePoints(rRef,nAngle,sn,cs);
+    SetGlueReallyAbsolute(false);
+}
+
+
+void SdrObjGroup::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    SetGlueReallyAbsolute(true);
+    MirrorPoint(aRefPoint,rRef1,rRef2); // implementation missing in SvdEtc!
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        pObj->NbcMirror(rRef1,rRef2);
+    }
+
+    NbcMirrorGluePoints(rRef1,rRef2);
+    SetGlueReallyAbsolute(false);
+}
+
+
+void SdrObjGroup::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    SetGlueReallyAbsolute(true);
+    ShearPoint(aRefPoint,rRef,tn);
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        pObj->NbcShear(rRef,nAngle,tn,bVShear);
+    }
+
+    NbcShearGluePoints(rRef,tn,bVShear);
+    SetGlueReallyAbsolute(false);
+}
+
+
+void SdrObjGroup::NbcSetAnchorPos(const Point& rPnt)
+{
+    aAnchor=rPnt;
+    Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y());
+    aRefPoint.Move(aSiz);
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        pObj->NbcSetAnchorPos(rPnt);
+    }
+}
+
+
+void SdrObjGroup::SetSnapRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    tools::Rectangle aOld(GetSnapRect());
+    if (aOld.IsEmpty())
+    {
+        Fraction aX(1,1);
+        Fraction aY(1,1);
+        Resize(aOld.TopLeft(),aX,aY);
+    }
+    else
+    {
+        long nMulX=rRect.Right()-rRect.Left();
+        long nDivX=aOld.Right()-aOld.Left();
+        long nMulY=rRect.Bottom()-rRect.Top();
+        long nDivY=aOld.Bottom()-aOld.Top();
+        if (nDivX==0) { nMulX=1; nDivX=1; }
+        if (nDivY==0) { nMulY=1; nDivY=1; }
+        if (nMulX!=nDivX || nMulY!=nDivY) {
+            Fraction aX(nMulX,nDivX);
+            Fraction aY(nMulY,nDivY);
+            Resize(aOld.TopLeft(),aX,aY);
+        }
+    }
+    if (rRect.Left()!=aOld.Left() || rRect.Top()!=aOld.Top()) {
+        Move(Size(rRect.Left()-aOld.Left(),rRect.Top()-aOld.Top()));
+    }
+
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+
+void SdrObjGroup::SetLogicRect(const tools::Rectangle& rRect)
+{
+    SetSnapRect(rRect);
+}
+
+
+void SdrObjGroup::Move(const Size& rSiz)
+{
+    if (rSiz.Width()!=0 || rSiz.Height()!=0) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        aRefPoint.Move(rSiz);
+        const size_t nObjCount(GetObjCount());
+
+        if(0 != nObjCount)
+        {
+            // first move the connectors, then everything else
+            for (size_t i=0; i<nObjCount; ++i)
+            {
+                SdrObject* pObj(GetObj(i));
+                if (pObj->IsEdgeObj())
+                    pObj->Move(rSiz);
+            }
+
+            for (size_t i=0; i<nObjCount; ++i)
+            {
+                SdrObject* pObj(GetObj(i));
+                if (!pObj->IsEdgeObj())
+                    pObj->Move(rSiz);
+            }
+        }
+        else
+        {
+            aOutRect.Move(rSiz);
+            SetRectsDirty();
+        }
+
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+
+
+void SdrObjGroup::Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bUnsetRelative)
+{
+    if (xFact.GetNumerator()!=xFact.GetDenominator() || yFact.GetNumerator()!=yFact.GetDenominator()) {
+        bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0);
+        bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0);
+        if (bXMirr || bYMirr) {
+            Point aRef1(GetSnapRect().Center());
+            if (bXMirr) {
+                Point aRef2(aRef1);
+                aRef2.AdjustY( 1 );
+                NbcMirrorGluePoints(aRef1,aRef2);
+            }
+            if (bYMirr) {
+                Point aRef2(aRef1);
+                aRef2.AdjustX( 1 );
+                NbcMirrorGluePoints(aRef1,aRef2);
+            }
+        }
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        ResizePoint(aRefPoint,rRef,xFact,yFact);
+        const size_t nObjCount(GetObjCount());
+
+        if(0 != nObjCount)
+        {
+            // move the connectors first, everything else afterwards
+            for (size_t i=0; i<nObjCount; ++i)
+            {
+                SdrObject* pObj(GetObj(i));
+                if (pObj->IsEdgeObj())
+                    pObj->Resize(rRef,xFact,yFact,bUnsetRelative);
+            }
+
+            for (size_t i=0; i<nObjCount; ++i)
+            {
+                SdrObject* pObj(GetObj(i));
+                if (!pObj->IsEdgeObj())
+                    pObj->Resize(rRef,xFact,yFact,bUnsetRelative);
+            }
+        }
+        else
+        {
+            ResizeRect(aOutRect,rRef,xFact,yFact);
+            SetRectsDirty();
+        }
+
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+
+void SdrObjGroup::Rotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    if (nAngle==0)
+        return;
+
+    SetGlueReallyAbsolute(true);
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    RotatePoint(aRefPoint,rRef,sn,cs);
+    // move the connectors first, everything else afterwards
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (pObj->IsEdgeObj())
+            pObj->Rotate(rRef,nAngle,sn,cs);
+    }
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (!pObj->IsEdgeObj())
+            pObj->Rotate(rRef,nAngle,sn,cs);
+    }
+
+    NbcRotateGluePoints(rRef,nAngle,sn,cs);
+    SetGlueReallyAbsolute(false);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+
+void SdrObjGroup::Mirror(const Point& rRef1, const Point& rRef2)
+{
+    SetGlueReallyAbsolute(true);
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    MirrorPoint(aRefPoint,rRef1,rRef2); // implementation missing in SvdEtc!
+    // move the connectors first, everything else afterwards
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (pObj->IsEdgeObj())
+            pObj->Mirror(rRef1,rRef2);
+    }
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (!pObj->IsEdgeObj())
+            pObj->Mirror(rRef1,rRef2);
+    }
+
+    NbcMirrorGluePoints(rRef1,rRef2);
+    SetGlueReallyAbsolute(false);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+
+void SdrObjGroup::Shear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    if (nAngle==0)
+        return;
+
+    SetGlueReallyAbsolute(true);
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    ShearPoint(aRefPoint,rRef,tn);
+    // move the connectors first, everything else afterwards
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (pObj->IsEdgeObj())
+            pObj->Shear(rRef,nAngle,tn,bVShear);
+    }
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (!pObj->IsEdgeObj())
+            pObj->Shear(rRef,nAngle,tn,bVShear);
+    }
+
+    NbcShearGluePoints(rRef,tn,bVShear);
+    SetGlueReallyAbsolute(false);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+
+}
+
+
+void SdrObjGroup::SetAnchorPos(const Point& rPnt)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    bool bChg=aAnchor!=rPnt;
+    aAnchor=rPnt;
+    Size aSiz(rPnt.X()-aAnchor.X(),rPnt.Y()-aAnchor.Y());
+    aRefPoint.Move(aSiz);
+    // move the connectors first, everything else afterwards
+    const size_t nObjCount(GetObjCount());
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (pObj->IsEdgeObj())
+            pObj->SetAnchorPos(rPnt);
+    }
+
+    for (size_t i=0; i<nObjCount; ++i)
+    {
+        SdrObject* pObj(GetObj(i));
+        if (!pObj->IsEdgeObj())
+            pObj->SetAnchorPos(rPnt);
+    }
+
+    if (bChg)
+    {
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+
+
+void SdrObjGroup::NbcSetRelativePos(const Point& rPnt)
+{
+    Point aRelPos0(GetSnapRect().TopLeft()-aAnchor);
+    Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y());
+    NbcMove(aSiz); // this also calls SetRectsDirty()
+}
+
+void SdrObjGroup::SetRelativePos(const Point& rPnt)
+{
+    Point aRelPos0(GetSnapRect().TopLeft()-aAnchor);
+    Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y());
+    if (aSiz.Width()!=0 || aSiz.Height()!=0) Move(aSiz); // this also calls SetRectsDirty() and Broadcast, ...
+}
+
+void SdrObjGroup::NbcReformatText()
+{
+    NbcReformatAllTextObjects();
+}
+
+SdrObjectUniquePtr SdrObjGroup::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    SdrObjectUniquePtr pGroup( new SdrObjGroup(getSdrModelFromSdrObject()) );
+    const size_t nObjCount(GetObjCount());
+
+    for(size_t a=0; a < nObjCount; ++a)
+    {
+        SdrObject* pIterObj(GetObj(a));
+        SdrObjectUniquePtr pResult(pIterObj->DoConvertToPolyObj(bBezier, bAddText));
+
+        // pResult can be NULL e.g. for empty objects
+        if( pResult )
+            pGroup->GetSubList()->NbcInsertObject(pResult.release());
+    }
+
+    return pGroup;
+}
+
+void SdrObjGroup::dumpAsXml(xmlTextWriterPtr pWriter) const
+{
+    xmlTextWriterStartElement(pWriter, BAD_CAST("SdrObjGroup"));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this);
+
+    SdrObject::dumpAsXml(pWriter);
+    SdrObjList::dumpAsXml(pWriter);
+
+    xmlTextWriterEndElement(pWriter);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdomeas.cxx b/svx/source/svdraw/svdomeas.cxx
new file mode 100644
index 000000000..af407f84b
--- /dev/null
+++ b/svx/source/svdraw/svdomeas.cxx
@@ -0,0 +1,1436 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <basegfx/point/b2dpoint.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolypolygon.hxx>
+#include <editeng/editdata.hxx>
+#include <editeng/editobj.hxx>
+#include <editeng/eeitem.hxx>
+#include <editeng/flditem.hxx>
+#include <editeng/measfld.hxx>
+#include <editeng/outlobj.hxx>
+#include <math.h>
+#include <svl/style.hxx>
+
+#include <sdr/contact/viewcontactofsdrmeasureobj.hxx>
+#include <sdr/properties/measureproperties.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/svdomeas.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdview.hxx>
+#include <svx/sxmbritm.hxx>
+#include <svx/sxmlhitm.hxx>
+#include <sxmsitm.hxx>
+#include <sxmtaitm.hxx>
+#include <svx/sxmtfitm.hxx>
+#include <svx/sxmtpitm.hxx>
+#include <svx/sxmtritm.hxx>
+#include <svx/sxmuitm.hxx>
+#include <svx/xlnedcit.hxx>
+#include <svx/xlnedit.hxx>
+#include <svx/xlnedwit.hxx>
+#include <svx/xlnstcit.hxx>
+#include <svx/xlnstit.hxx>
+#include <svx/xlnstwit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/xpoly.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <unotools/syslocale.hxx>
+#include <unotools/localedatawrapper.hxx>
+#include <vcl/ptrstyle.hxx>
+
+
+SdrMeasureObjGeoData::SdrMeasureObjGeoData() {}
+SdrMeasureObjGeoData::~SdrMeasureObjGeoData() {}
+
+OUString SdrMeasureObj::TakeRepresentation(SdrMeasureFieldKind eMeasureFieldKind) const
+{
+    OUString aStr;
+    Fraction aMeasureScale(1, 1);
+    bool bTextRota90(false);
+    bool bShowUnit(false);
+    FieldUnit eMeasureUnit(FieldUnit::NONE);
+    FieldUnit eModUIUnit(FieldUnit::NONE);
+
+    const SfxItemSet& rSet = GetMergedItemSet();
+    bTextRota90 = rSet.Get(SDRATTR_MEASURETEXTROTA90).GetValue();
+    eMeasureUnit = rSet.Get(SDRATTR_MEASUREUNIT).GetValue();
+    aMeasureScale = rSet.Get(SDRATTR_MEASURESCALE).GetValue();
+    bShowUnit = rSet.Get(SDRATTR_MEASURESHOWUNIT).GetValue();
+    sal_Int16 nNumDigits = rSet.Get(SDRATTR_MEASUREDECIMALPLACES).GetValue();
+
+    switch(eMeasureFieldKind)
+    {
+        case SdrMeasureFieldKind::Value:
+        {
+            eModUIUnit = getSdrModelFromSdrObject().GetUIUnit();
+
+            if(eMeasureUnit == FieldUnit::NONE)
+                eMeasureUnit = eModUIUnit;
+
+            sal_Int32 nLen(GetLen(aPt2 - aPt1));
+            Fraction aFact(1,1);
+
+            if(eMeasureUnit != eModUIUnit)
+            {
+                // for the unit conversion
+                aFact *= GetMapFactor(eModUIUnit, eMeasureUnit).X();
+            }
+
+            if(aMeasureScale.GetNumerator() != aMeasureScale.GetDenominator())
+            {
+                aFact *= aMeasureScale;
+            }
+
+            if(aFact.GetNumerator() != aFact.GetDenominator())
+            {
+                // scale via BigInt, to avoid overruns
+                nLen = BigMulDiv(nLen, aFact.GetNumerator(), aFact.GetDenominator());
+            }
+
+            if(!aFact.IsValid())
+            {
+                aStr = "?";
+            }
+            else
+            {
+                aStr = getSdrModelFromSdrObject().GetMetricString(nLen, true, nNumDigits);
+            }
+
+            SvtSysLocale aSysLocale;
+            const LocaleDataWrapper& rLocaleDataWrapper = aSysLocale.GetLocaleData();
+            sal_Unicode cDec(rLocaleDataWrapper.getNumDecimalSep()[0]);
+            sal_Unicode cDecAlt(rLocaleDataWrapper.getNumDecimalSepAlt().toChar());
+
+            if(aStr.indexOf(cDec) != -1 || (cDecAlt && aStr.indexOf(cDecAlt) != -1))
+            {
+                sal_Int32 nLen2(aStr.getLength() - 1);
+
+                while(aStr[nLen2] == '0')
+                {
+                    aStr = aStr.copy(0, nLen2);
+                    nLen2--;
+                }
+
+                if(aStr[nLen2] == cDec || (cDecAlt && aStr[nLen2] == cDecAlt))
+                {
+                    aStr = aStr.copy(0, nLen2);
+                    nLen2--;
+                }
+
+                if(aStr.isEmpty())
+                    aStr += "0";
+            }
+
+            break;
+        }
+        case SdrMeasureFieldKind::Unit:
+        {
+            if(bShowUnit)
+            {
+                eModUIUnit = getSdrModelFromSdrObject().GetUIUnit();
+
+                if(eMeasureUnit == FieldUnit::NONE)
+                    eMeasureUnit = eModUIUnit;
+
+                aStr = SdrModel::GetUnitString(eMeasureUnit);
+            }
+
+            break;
+        }
+        case SdrMeasureFieldKind::Rotate90Blanks:
+        {
+            if(bTextRota90)
+            {
+                aStr = " ";
+            }
+
+            break;
+        }
+    }
+    return aStr;
+}
+
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrMeasureObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::MeasureProperties>(*this);
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrMeasureObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrMeasureObj>(*this);
+}
+
+
+SdrMeasureObj::SdrMeasureObj(SdrModel& rSdrModel)
+:   SdrTextObj(rSdrModel),
+    bTextDirty(false)
+{
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = false;
+}
+
+SdrMeasureObj::SdrMeasureObj(
+    SdrModel& rSdrModel,
+    const Point& rPt1,
+    const Point& rPt2)
+:   SdrTextObj(rSdrModel),
+    aPt1(rPt1),
+    aPt2(rPt2),
+    bTextDirty(false)
+{
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = false;
+}
+
+SdrMeasureObj::~SdrMeasureObj()
+{
+}
+
+void SdrMeasureObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bMoveAllowed      =true;
+    rInfo.bResizeFreeAllowed=true;
+    rInfo.bResizePropAllowed=true;
+    rInfo.bRotateFreeAllowed=true;
+    rInfo.bRotate90Allowed  =true;
+    rInfo.bMirrorFreeAllowed=true;
+    rInfo.bMirror45Allowed  =true;
+    rInfo.bMirror90Allowed  =true;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed     =true;
+    rInfo.bEdgeRadiusAllowed=false;
+    rInfo.bNoOrthoDesired   =true;
+    rInfo.bNoContortion     =false;
+    rInfo.bCanConvToPath    =false;
+    rInfo.bCanConvToPoly    =true;
+    rInfo.bCanConvToPathLineToArea=false;
+    rInfo.bCanConvToPolyLineToArea=false;
+    rInfo.bCanConvToContour = LineGeometryUsageIsNecessary();
+}
+
+sal_uInt16 SdrMeasureObj::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_MEASURE);
+}
+
+struct ImpMeasureRec : public SdrDragStatUserData
+{
+    Point                       aPt1;
+    Point                       aPt2;
+    css::drawing::MeasureTextHorzPos eWantTextHPos;
+    css::drawing::MeasureTextVertPos eWantTextVPos;
+    long                        nLineDist;
+    long                        nHelplineOverhang;
+    long                        nHelplineDist;
+    long                        nHelpline1Len;
+    long                        nHelpline2Len;
+    bool                        bBelowRefEdge;
+    bool                        bTextRota90;
+    bool                        bTextUpsideDown;
+    bool                        bTextAutoAngle;
+    long                        nTextAutoAngleView;
+};
+
+namespace {
+
+struct ImpLineRec
+{
+    Point                       aP1;
+    Point                       aP2;
+};
+
+}
+
+struct ImpMeasurePoly
+{
+    ImpLineRec                  aMainline1; // those with the 1st arrowhead
+    ImpLineRec                  aMainline2; // those with the 2nd arrowhead
+    ImpLineRec                  aMainline3; // those in between
+    ImpLineRec                  aHelpline1;
+    ImpLineRec                  aHelpline2;
+    Size                        aTextSize;
+    long                        nLineLen;
+    long                        nLineAngle;
+    long                        nTextAngle;
+    long                        nHlpAngle;
+    double                      nLineSin;
+    double                      nLineCos;
+    sal_uInt16                      nMainlineCnt;
+    css::drawing::MeasureTextHorzPos eUsedTextHPos;
+    css::drawing::MeasureTextVertPos eUsedTextVPos;
+    long                        nLineWdt2;  // half the line width
+    long                        nArrow1Len; // length of 1st arrowhead; for Center, use only half
+    long                        nArrow2Len; // length of 2nd arrowhead; for Center, use only half
+    long                        nArrow1Wdt; // width of 1st arrow
+    long                        nArrow2Wdt; // width of 2nd arrow
+    long                        nShortLineLen; // line length, if PfeileAussen (arrowheads on the outside)
+    bool                        bAutoUpsideDown; // UpsideDown via automation
+    bool                        bBreakedLine;
+};
+
+void SdrMeasureObj::ImpTakeAttr(ImpMeasureRec& rRec) const
+{
+    rRec.aPt1 = aPt1;
+    rRec.aPt2 = aPt2;
+
+    const SfxItemSet& rSet = GetObjectItemSet();
+    rRec.eWantTextHPos     =rSet.Get(SDRATTR_MEASURETEXTHPOS        ).GetValue();
+    rRec.eWantTextVPos     =rSet.Get(SDRATTR_MEASURETEXTVPOS        ).GetValue();
+    rRec.nLineDist         =rSet.Get(SDRATTR_MEASURELINEDIST        ).GetValue();
+    rRec.nHelplineOverhang =rSet.Get(SDRATTR_MEASUREHELPLINEOVERHANG).GetValue();
+    rRec.nHelplineDist     =rSet.Get(SDRATTR_MEASUREHELPLINEDIST    ).GetValue();
+    rRec.nHelpline1Len     =rSet.Get(SDRATTR_MEASUREHELPLINE1LEN    ).GetValue();
+    rRec.nHelpline2Len     =rSet.Get(SDRATTR_MEASUREHELPLINE2LEN    ).GetValue();
+    rRec.bBelowRefEdge     =rSet.Get(SDRATTR_MEASUREBELOWREFEDGE    ).GetValue();
+    rRec.bTextRota90       =rSet.Get(SDRATTR_MEASURETEXTROTA90      ).GetValue();
+    rRec.bTextUpsideDown   =static_cast<const SdrMeasureTextUpsideDownItem&   >(rSet.Get(SDRATTR_MEASURETEXTUPSIDEDOWN  )).GetValue();
+    rRec.bTextAutoAngle    =rSet.Get(SDRATTR_MEASURETEXTAUTOANGLE    ).GetValue();
+    rRec.nTextAutoAngleView=static_cast<const SdrMeasureTextAutoAngleViewItem&>(rSet.Get(SDRATTR_MEASURETEXTAUTOANGLEVIEW)).GetValue();
+}
+
+static long impGetLineStartEndDistance(const basegfx::B2DPolyPolygon& rPolyPolygon, long nNewWidth, bool bCenter)
+{
+    const basegfx::B2DRange aPolygonRange(rPolyPolygon.getB2DRange());
+    const double fOldWidth(std::max(aPolygonRange.getWidth(), 1.0));
+    const double fScale(static_cast<double>(nNewWidth) / fOldWidth);
+    long nHeight(basegfx::fround(aPolygonRange.getHeight() * fScale));
+
+    if(bCenter)
+    {
+        nHeight /= 2;
+    }
+
+    return nHeight;
+}
+
+void SdrMeasureObj::ImpCalcGeometrics(const ImpMeasureRec& rRec, ImpMeasurePoly& rPol) const
+{
+    Point aP1(rRec.aPt1);
+    Point aP2(rRec.aPt2);
+    Point aDelt(aP2); aDelt-=aP1;
+
+    rPol.aTextSize=GetTextSize();
+    rPol.nLineLen=GetLen(aDelt);
+
+    rPol.nLineWdt2=0;
+    long nArrow1Len=0; bool bArrow1Center=false;
+    long nArrow2Len=0; bool bArrow2Center=false;
+    long nArrow1Wdt=0;
+    long nArrow2Wdt=0;
+    rPol.nArrow1Wdt=0;
+    rPol.nArrow2Wdt=0;
+    long nArrowNeed=0;
+    long nShortLen=0;
+    bool bPfeileAussen = false;
+
+    const SfxItemSet& rSet = GetObjectItemSet();
+    sal_Int32 nLineWdt = rSet.Get(XATTR_LINEWIDTH).GetValue(); // line width
+    rPol.nLineWdt2 = (nLineWdt + 1) / 2;
+
+    nArrow1Wdt = rSet.Get(XATTR_LINESTARTWIDTH).GetValue();
+    if(nArrow1Wdt < 0)
+        nArrow1Wdt = -nLineWdt * nArrow1Wdt / 100; // <0 = relative
+
+    nArrow2Wdt = rSet.Get(XATTR_LINEENDWIDTH).GetValue();
+    if(nArrow2Wdt < 0)
+        nArrow2Wdt = -nLineWdt * nArrow2Wdt / 100; // <0 = relative
+
+    basegfx::B2DPolyPolygon aPol1(rSet.Get(XATTR_LINESTART).GetLineStartValue());
+    basegfx::B2DPolyPolygon aPol2(rSet.Get(XATTR_LINEEND).GetLineEndValue());
+    bArrow1Center = rSet.Get(XATTR_LINESTARTCENTER).GetValue();
+    bArrow2Center = rSet.Get(XATTR_LINEENDCENTER).GetValue();
+    nArrow1Len = impGetLineStartEndDistance(aPol1, nArrow1Wdt, bArrow1Center) - 1;
+    nArrow2Len = impGetLineStartEndDistance(aPol2, nArrow2Wdt, bArrow2Center) - 1;
+
+    // nArrowLen is already halved at bCenter.
+    // In the case of 2 arrowheads each 4mm long, we can't go below 10mm.
+    nArrowNeed=nArrow1Len+nArrow2Len+(nArrow1Wdt+nArrow2Wdt)/2;
+    if (rPol.nLineLen<nArrowNeed) bPfeileAussen = true;
+    nShortLen=(nArrow1Len+nArrow1Wdt + nArrow2Len+nArrow2Wdt) /2;
+
+    rPol.eUsedTextHPos=rRec.eWantTextHPos;
+    rPol.eUsedTextVPos=rRec.eWantTextVPos;
+    if (rPol.eUsedTextVPos == css::drawing::MeasureTextVertPos_AUTO)
+        rPol.eUsedTextVPos = css::drawing::MeasureTextVertPos_EAST;
+    bool bBrkLine=false;
+    if (rPol.eUsedTextVPos == css::drawing::MeasureTextVertPos_CENTERED)
+    {
+        OutlinerParaObject* pOutlinerParaObject = SdrTextObj::GetOutlinerParaObject();
+        if (pOutlinerParaObject!=nullptr && pOutlinerParaObject->GetTextObject().GetParagraphCount()==1)
+        {
+            bBrkLine=true; // dashed line if there's only on paragraph.
+        }
+    }
+    rPol.bBreakedLine=bBrkLine;
+    if (rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_AUTO) { // if text is too wide, push it outside
+        bool bOutside = false;
+        long nNeedSiz=!rRec.bTextRota90 ? rPol.aTextSize.Width() : rPol.aTextSize.Height();
+        if (nNeedSiz>rPol.nLineLen) bOutside = true; // text doesn't fit in between
+        if (bBrkLine) {
+            if (nNeedSiz+nArrowNeed>rPol.nLineLen) bPfeileAussen = true; // text fits in between, if arrowheads are on the outside
+        } else {
+            long nSmallNeed=nArrow1Len+nArrow2Len+(nArrow1Wdt+nArrow2Wdt)/2/4;
+            if (nNeedSiz+nSmallNeed>rPol.nLineLen) bPfeileAussen = true; // text fits in between, if arrowheads are on the outside
+        }
+        rPol.eUsedTextHPos=bOutside ? css::drawing::MeasureTextHorzPos_LEFTOUTSIDE : css::drawing::MeasureTextHorzPos_INSIDE;
+    }
+    if (rPol.eUsedTextHPos != css::drawing::MeasureTextHorzPos_INSIDE) bPfeileAussen = true;
+    rPol.nArrow1Wdt=nArrow1Wdt;
+    rPol.nArrow2Wdt=nArrow2Wdt;
+    rPol.nShortLineLen=nShortLen;
+    rPol.nArrow1Len=nArrow1Len;
+    rPol.nArrow2Len=nArrow2Len;
+
+    rPol.nLineAngle=GetAngle(aDelt);
+    double a = rPol.nLineAngle * F_PI18000;
+    double nLineSin=sin(a);
+    double nLineCos=cos(a);
+    rPol.nLineSin=nLineSin;
+    rPol.nLineCos=nLineCos;
+
+    rPol.nTextAngle=rPol.nLineAngle;
+    if (rRec.bTextRota90) rPol.nTextAngle+=9000;
+
+    rPol.bAutoUpsideDown=false;
+    if (rRec.bTextAutoAngle) {
+        long nTmpAngle=NormAngle36000(rPol.nTextAngle-rRec.nTextAutoAngleView);
+        if (nTmpAngle>=18000) {
+            rPol.nTextAngle+=18000;
+            rPol.bAutoUpsideDown=true;
+        }
+    }
+
+    if (rRec.bTextUpsideDown) rPol.nTextAngle+=18000;
+    rPol.nTextAngle=NormAngle36000(rPol.nTextAngle);
+    rPol.nHlpAngle=rPol.nLineAngle+9000;
+    if (rRec.bBelowRefEdge) rPol.nHlpAngle+=18000;
+    rPol.nHlpAngle=NormAngle36000(rPol.nHlpAngle);
+    double nHlpSin=nLineCos;
+    double nHlpCos=-nLineSin;
+    if (rRec.bBelowRefEdge) {
+        nHlpSin=-nHlpSin;
+        nHlpCos=-nHlpCos;
+    }
+
+    long nLineDist=rRec.nLineDist;
+    long nOverhang=rRec.nHelplineOverhang;
+    long nHelplineDist=rRec.nHelplineDist;
+
+    long dx= FRound(nLineDist*nHlpCos);
+    long dy=-FRound(nLineDist*nHlpSin);
+    long dxh1a= FRound((nHelplineDist-rRec.nHelpline1Len)*nHlpCos);
+    long dyh1a=-FRound((nHelplineDist-rRec.nHelpline1Len)*nHlpSin);
+    long dxh1b= FRound((nHelplineDist-rRec.nHelpline2Len)*nHlpCos);
+    long dyh1b=-FRound((nHelplineDist-rRec.nHelpline2Len)*nHlpSin);
+    long dxh2= FRound((nLineDist+nOverhang)*nHlpCos);
+    long dyh2=-FRound((nLineDist+nOverhang)*nHlpSin);
+
+    // extension line 1
+    rPol.aHelpline1.aP1=Point(aP1.X()+dxh1a,aP1.Y()+dyh1a);
+    rPol.aHelpline1.aP2=Point(aP1.X()+dxh2,aP1.Y()+dyh2);
+
+    // extension line 2
+    rPol.aHelpline2.aP1=Point(aP2.X()+dxh1b,aP2.Y()+dyh1b);
+    rPol.aHelpline2.aP2=Point(aP2.X()+dxh2,aP2.Y()+dyh2);
+
+    // dimension line
+    Point aMainlinePt1(aP1.X()+dx,aP1.Y()+dy);
+    Point aMainlinePt2(aP2.X()+dx,aP2.Y()+dy);
+    if (!bPfeileAussen) {
+        rPol.aMainline1.aP1=aMainlinePt1;
+        rPol.aMainline1.aP2=aMainlinePt2;
+        rPol.aMainline2=rPol.aMainline1;
+        rPol.aMainline3=rPol.aMainline1;
+        rPol.nMainlineCnt=1;
+        if (bBrkLine) {
+            long nNeedSiz=!rRec.bTextRota90 ? rPol.aTextSize.Width() : rPol.aTextSize.Height();
+            long nHalfLen=(rPol.nLineLen-nNeedSiz-nArrow1Wdt/4-nArrow2Wdt/4) /2;
+            rPol.nMainlineCnt=2;
+            rPol.aMainline1.aP2=aMainlinePt1;
+            rPol.aMainline1.aP2.AdjustX(nHalfLen );
+            RotatePoint(rPol.aMainline1.aP2,rPol.aMainline1.aP1,nLineSin,nLineCos);
+            rPol.aMainline2.aP1=aMainlinePt2;
+            rPol.aMainline2.aP1.AdjustX( -nHalfLen );
+            RotatePoint(rPol.aMainline2.aP1,rPol.aMainline2.aP2,nLineSin,nLineCos);
+        }
+    } else {
+        long nLen1=nShortLen; // arrowhead's width as line length outside of the arrowhead
+        long nLen2=nShortLen;
+        long nTextWdt=rRec.bTextRota90 ? rPol.aTextSize.Height() : rPol.aTextSize.Width();
+        if (!bBrkLine) {
+            if (rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_LEFTOUTSIDE) nLen1=nArrow1Len+nTextWdt;
+            if (rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE) nLen2=nArrow2Len+nTextWdt;
+        }
+        rPol.aMainline1.aP1=aMainlinePt1;
+        rPol.aMainline1.aP2=aMainlinePt1; rPol.aMainline1.aP2.AdjustX( -nLen1 ); RotatePoint(rPol.aMainline1.aP2,aMainlinePt1,nLineSin,nLineCos);
+        rPol.aMainline2.aP1=aMainlinePt2; rPol.aMainline2.aP1.AdjustX(nLen2 ); RotatePoint(rPol.aMainline2.aP1,aMainlinePt2,nLineSin,nLineCos);
+        rPol.aMainline2.aP2=aMainlinePt2;
+        rPol.aMainline3.aP1=aMainlinePt1;
+        rPol.aMainline3.aP2=aMainlinePt2;
+        rPol.nMainlineCnt=3;
+        if (bBrkLine && rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_INSIDE) rPol.nMainlineCnt=2;
+    }
+}
+
+basegfx::B2DPolyPolygon SdrMeasureObj::ImpCalcXPoly(const ImpMeasurePoly& rPol)
+{
+    basegfx::B2DPolyPolygon aRetval;
+    basegfx::B2DPolygon aPartPolyA;
+    aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline1.aP1.X(), rPol.aMainline1.aP1.Y()));
+    aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline1.aP2.X(), rPol.aMainline1.aP2.Y()));
+    aRetval.append(aPartPolyA);
+
+    if(rPol.nMainlineCnt > 1)
+    {
+        aPartPolyA.clear();
+        aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline2.aP1.X(), rPol.aMainline2.aP1.Y()));
+        aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline2.aP2.X(), rPol.aMainline2.aP2.Y()));
+        aRetval.append(aPartPolyA);
+    }
+
+    if(rPol.nMainlineCnt > 2)
+    {
+        aPartPolyA.clear();
+        aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline3.aP1.X(), rPol.aMainline3.aP1.Y()));
+        aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline3.aP2.X(), rPol.aMainline3.aP2.Y()));
+        aRetval.append(aPartPolyA);
+    }
+
+    aPartPolyA.clear();
+    aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline1.aP1.X(), rPol.aHelpline1.aP1.Y()));
+    aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline1.aP2.X(), rPol.aHelpline1.aP2.Y()));
+    aRetval.append(aPartPolyA);
+
+    aPartPolyA.clear();
+    aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline2.aP1.X(), rPol.aHelpline2.aP1.Y()));
+    aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline2.aP2.X(), rPol.aHelpline2.aP2.Y()));
+    aRetval.append(aPartPolyA);
+
+    return aRetval;
+}
+
+bool SdrMeasureObj::CalcFieldValue(const SvxFieldItem& rField, sal_Int32 nPara, sal_uInt16 nPos,
+    bool bEdit,
+    std::optional<Color>& rpTxtColor, std::optional<Color>& rpFldColor, OUString& rRet) const
+{
+    const SvxFieldData* pField=rField.GetField();
+    const SdrMeasureField* pMeasureField=dynamic_cast<const SdrMeasureField*>( pField );
+    if (pMeasureField!=nullptr) {
+        rRet = TakeRepresentation(pMeasureField->GetMeasureFieldKind());
+        if (rpFldColor && !bEdit)
+        {
+            rpFldColor.reset();
+        }
+        return true;
+    } else {
+        return SdrTextObj::CalcFieldValue(rField,nPara,nPos,bEdit,rpTxtColor,rpFldColor,rRet);
+    }
+}
+
+void SdrMeasureObj::UndirtyText() const
+{
+    if (bTextDirty)
+    {
+        SdrOutliner& rOutliner=ImpGetDrawOutliner();
+        OutlinerParaObject* pOutlinerParaObject = SdrTextObj::GetOutlinerParaObject();
+        if(pOutlinerParaObject==nullptr)
+        {
+            rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Rotate90Blanks), EE_FEATURE_FIELD), ESelection(0,0));
+            rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Value), EE_FEATURE_FIELD),ESelection(0,1));
+            rOutliner.QuickInsertText(" ", ESelection(0,2));
+            rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Unit), EE_FEATURE_FIELD),ESelection(0,3));
+            rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Rotate90Blanks), EE_FEATURE_FIELD),ESelection(0,4));
+
+            if(GetStyleSheet())
+                rOutliner.SetStyleSheet(0, GetStyleSheet());
+
+            rOutliner.SetParaAttribs(0, GetObjectItemSet());
+
+            // cast to nonconst
+            const_cast<SdrMeasureObj*>(this)->NbcSetOutlinerParaObject( rOutliner.CreateParaObject() );
+        }
+        else
+        {
+            rOutliner.SetText(*pOutlinerParaObject);
+        }
+
+        rOutliner.SetUpdateMode(true);
+        rOutliner.UpdateFields();
+        Size aSiz(rOutliner.CalcTextSize());
+        rOutliner.Clear();
+        // cast to nonconst three times
+        const_cast<SdrMeasureObj*>(this)->aTextSize=aSiz;
+        const_cast<SdrMeasureObj*>(this)->bTextSizeDirty=false;
+        const_cast<SdrMeasureObj*>(this)->bTextDirty=false;
+    }
+}
+
+void SdrMeasureObj::TakeUnrotatedSnapRect(tools::Rectangle& rRect) const
+{
+    if (bTextDirty) UndirtyText();
+    ImpMeasureRec aRec;
+    ImpMeasurePoly aMPol;
+    ImpTakeAttr(aRec);
+    ImpCalcGeometrics(aRec,aMPol);
+
+    // determine TextSize including text frame margins
+    Size aTextSize2(aMPol.aTextSize);
+    if (aTextSize2.Width()<1) aTextSize2.setWidth(1 );
+    if (aTextSize2.Height()<1) aTextSize2.setHeight(1 );
+    aTextSize2.AdjustWidth(GetTextLeftDistance()+GetTextRightDistance() );
+    aTextSize2.AdjustHeight(GetTextUpperDistance()+GetTextLowerDistance() );
+
+    Point aPt1b(aMPol.aMainline1.aP1);
+    long nLen=aMPol.nLineLen;
+    long nLWdt=aMPol.nLineWdt2;
+    long nArr1Len=aMPol.nArrow1Len;
+    long nArr2Len=aMPol.nArrow2Len;
+    if (aMPol.bBreakedLine) {
+        // In the case of a dashed line and Outside, the text should be
+        // placed next to the line at the arrowhead instead of directly
+        // at the arrowhead.
+        nArr1Len=aMPol.nShortLineLen+aMPol.nArrow1Wdt/4;
+        nArr2Len=aMPol.nShortLineLen+aMPol.nArrow2Wdt/4;
+    }
+
+    Point aTextPos;
+    bool bRota90=aRec.bTextRota90;
+    bool bUpsideDown=aRec.bTextUpsideDown!=aMPol.bAutoUpsideDown;
+    bool bBelowRefEdge=aRec.bBelowRefEdge;
+    css::drawing::MeasureTextHorzPos eMH=aMPol.eUsedTextHPos;
+    css::drawing::MeasureTextVertPos eMV=aMPol.eUsedTextVPos;
+    if (!bRota90) {
+        switch (eMH) {
+            case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: aTextPos.setX(aPt1b.X()-aTextSize2.Width()-nArr1Len-nLWdt ); break;
+            case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: aTextPos.setX(aPt1b.X()+nLen+nArr2Len+nLWdt ); break;
+            default: aTextPos.setX(aPt1b.X() ); aTextSize2.setWidth(nLen );
+        }
+        switch (eMV) {
+            case css::drawing::MeasureTextVertPos_CENTERED:
+                aTextPos.setY(aPt1b.Y()-aTextSize2.Height()/2 ); break;
+            case css::drawing::MeasureTextVertPos_WEST: {
+                if (!bUpsideDown) aTextPos.setY(aPt1b.Y()+nLWdt );
+                else aTextPos.setY(aPt1b.Y()-aTextSize2.Height()-nLWdt );
+            } break;
+            default: {
+                if (!bUpsideDown) aTextPos.setY(aPt1b.Y()-aTextSize2.Height()-nLWdt );
+                else aTextPos.setY(aPt1b.Y()+nLWdt );
+            }
+        }
+        if (bUpsideDown) {
+            aTextPos.AdjustX(aTextSize2.Width() );
+            aTextPos.AdjustY(aTextSize2.Height() );
+        }
+    } else { // also if bTextRota90==TRUE
+        switch (eMH) {
+            case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: aTextPos.setX(aPt1b.X()-aTextSize2.Height()-nArr1Len ); break;
+            case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: aTextPos.setX(aPt1b.X()+nLen+nArr2Len ); break;
+            default: aTextPos.setX(aPt1b.X() ); aTextSize2.setHeight(nLen );
+        }
+        switch (eMV) {
+            case css::drawing::MeasureTextVertPos_CENTERED:
+                aTextPos.setY(aPt1b.Y()+aTextSize2.Width()/2 ); break;
+            case css::drawing::MeasureTextVertPos_WEST: {
+                if (!bBelowRefEdge) aTextPos.setY(aPt1b.Y()+aTextSize2.Width()+nLWdt );
+                else aTextPos.setY(aPt1b.Y()-nLWdt );
+            } break;
+            default: {
+                if (!bBelowRefEdge) aTextPos.setY(aPt1b.Y()-nLWdt );
+                else aTextPos.setY(aPt1b.Y()+aTextSize2.Width()+nLWdt );
+            }
+        }
+        if (bUpsideDown) {
+            aTextPos.AdjustX(aTextSize2.Height() );
+            aTextPos.AdjustY( -(aTextSize2.Width()) );
+        }
+    }
+    if (aMPol.nTextAngle!=aGeo.nRotationAngle) {
+        const_cast<SdrMeasureObj*>(this)->aGeo.nRotationAngle=aMPol.nTextAngle;
+        const_cast<SdrMeasureObj*>(this)->aGeo.RecalcSinCos();
+    }
+    RotatePoint(aTextPos,aPt1b,aMPol.nLineSin,aMPol.nLineCos);
+    aTextSize2.AdjustWidth( 1 ); aTextSize2.AdjustHeight( 1 ); // because of the Rect-Ctor's odd behavior
+    rRect=tools::Rectangle(aTextPos,aTextSize2);
+    rRect.Justify();
+    const_cast<SdrMeasureObj*>(this)->maRect=rRect;
+
+    if (aMPol.nTextAngle!=aGeo.nRotationAngle) {
+        const_cast<SdrMeasureObj*>(this)->aGeo.nRotationAngle=aMPol.nTextAngle;
+        const_cast<SdrMeasureObj*>(this)->aGeo.RecalcSinCos();
+    }
+}
+
+SdrMeasureObj* SdrMeasureObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrMeasureObj >(rTargetModel);
+}
+
+SdrMeasureObj& SdrMeasureObj::operator=(const SdrMeasureObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrTextObj::operator=(rObj);
+
+    aPt1 = rObj.aPt1;
+    aPt2 = rObj.aPt2;
+    bTextDirty = rObj.bTextDirty;
+
+    return *this;
+}
+
+OUString SdrMeasureObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulMEASURE));
+
+    OUString aName( GetName() );
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrMeasureObj::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralMEASURE);
+}
+
+basegfx::B2DPolyPolygon SdrMeasureObj::TakeXorPoly() const
+{
+    ImpMeasureRec aRec;
+    ImpMeasurePoly aMPol;
+    ImpTakeAttr(aRec);
+    ImpCalcGeometrics(aRec,aMPol);
+    return ImpCalcXPoly(aMPol);
+}
+
+sal_uInt32 SdrMeasureObj::GetHdlCount() const
+{
+    return 6;
+}
+
+void SdrMeasureObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    ImpMeasureRec aRec;
+    ImpMeasurePoly aMPol;
+    ImpTakeAttr(aRec);
+    aRec.nHelplineDist=0;
+    ImpCalcGeometrics(aRec,aMPol);
+
+    for (sal_uInt32 nHdlNum=0; nHdlNum<6; ++nHdlNum)
+    {
+        Point aPt;
+        switch (nHdlNum) {
+            case 0: aPt=aMPol.aHelpline1.aP1; break;
+            case 1: aPt=aMPol.aHelpline2.aP1; break;
+            case 2: aPt=aPt1;       break;
+            case 3: aPt=aPt2;       break;
+            case 4: aPt=aMPol.aHelpline1.aP2; break;
+            case 5: aPt=aMPol.aHelpline2.aP2; break;
+        } // switch
+        std::unique_ptr<SdrHdl> pHdl(new ImpMeasureHdl(aPt,SdrHdlKind::User));
+        pHdl->SetObjHdlNum(nHdlNum);
+        pHdl->SetRotationAngle(aMPol.nLineAngle);
+        rHdlList.AddHdl(std::move(pHdl));
+    }
+}
+
+
+bool SdrMeasureObj::hasSpecialDrag() const
+{
+    return true;
+}
+
+bool SdrMeasureObj::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    const SdrHdl* pHdl = rDrag.GetHdl();
+
+    if(pHdl)
+    {
+        const sal_uInt32 nHdlNum(pHdl->GetObjHdlNum());
+
+        if(nHdlNum != 2 && nHdlNum != 3)
+        {
+            rDrag.SetEndDragChangesAttributes(true);
+        }
+
+        return true;
+    }
+
+    return false;
+}
+
+bool SdrMeasureObj::applySpecialDrag(SdrDragStat& rDrag)
+{
+    ImpMeasureRec aMeasureRec;
+    const SdrHdl* pHdl = rDrag.GetHdl();
+    const sal_uInt32 nHdlNum(pHdl->GetObjHdlNum());
+
+    ImpTakeAttr(aMeasureRec);
+    ImpEvalDrag(aMeasureRec, rDrag);
+
+    switch (nHdlNum)
+    {
+        case 2:
+        {
+            aPt1 = aMeasureRec.aPt1;
+            SetTextDirty();
+            break;
+        }
+        case 3:
+        {
+            aPt2 = aMeasureRec.aPt2;
+            SetTextDirty();
+            break;
+        }
+        default:
+        {
+            switch(nHdlNum)
+            {
+                case 0:
+                case 1:
+                {
+                    ImpMeasureRec aOrigMeasureRec;
+                    ImpTakeAttr(aOrigMeasureRec);
+
+                    if(aMeasureRec.nHelpline1Len != aOrigMeasureRec.nHelpline1Len)
+                    {
+                        SetObjectItem(makeSdrMeasureHelpline1LenItem(aMeasureRec.nHelpline1Len));
+                    }
+
+                    if(aMeasureRec.nHelpline2Len != aOrigMeasureRec.nHelpline2Len)
+                    {
+                        SetObjectItem(makeSdrMeasureHelpline2LenItem(aMeasureRec.nHelpline2Len));
+                    }
+
+                    break;
+                }
+
+                case 4:
+                case 5:
+                {
+                    ImpMeasureRec aOrigMeasureRec;
+                    ImpTakeAttr(aOrigMeasureRec);
+
+                    if(aMeasureRec.nLineDist != aOrigMeasureRec.nLineDist)
+                    {
+                        SetObjectItem(makeSdrMeasureLineDistItem(aMeasureRec.nLineDist));
+                    }
+
+                    if(aMeasureRec.bBelowRefEdge != aOrigMeasureRec.bBelowRefEdge)
+                    {
+                        SetObjectItem(SdrMeasureBelowRefEdgeItem(aMeasureRec.bBelowRefEdge));
+                    }
+                }
+            }
+        }
+    } // switch
+
+    SetRectsDirty();
+    SetChanged();
+
+    return true;
+}
+
+OUString SdrMeasureObj::getSpecialDragComment(const SdrDragStat& /*rDrag*/) const
+{
+    return OUString();
+}
+
+void SdrMeasureObj::ImpEvalDrag(ImpMeasureRec& rRec, const SdrDragStat& rDrag) const
+{
+    long nLineAngle=GetAngle(rRec.aPt2-rRec.aPt1);
+    double a = nLineAngle * F_PI18000;
+    double nSin=sin(a);
+    double nCos=cos(a);
+
+    const SdrHdl* pHdl=rDrag.GetHdl();
+    sal_uInt32 nHdlNum(pHdl->GetObjHdlNum());
+    bool bOrtho=rDrag.GetView()!=nullptr && rDrag.GetView()->IsOrtho();
+    bool bBigOrtho=bOrtho && rDrag.GetView()->IsBigOrtho();
+    bool bBelow=rRec.bBelowRefEdge;
+    Point aPt(rDrag.GetNow());
+
+    switch (nHdlNum) {
+        case 0: {
+            RotatePoint(aPt,aPt1,nSin,-nCos);
+            rRec.nHelpline1Len=aPt1.Y()-aPt.Y();
+            if (bBelow) rRec.nHelpline1Len=-rRec.nHelpline1Len;
+            if (bOrtho) rRec.nHelpline2Len=rRec.nHelpline1Len;
+        } break;
+        case 1: {
+            RotatePoint(aPt,aPt2,nSin,-nCos);
+            rRec.nHelpline2Len=aPt2.Y()-aPt.Y();
+            if (bBelow) rRec.nHelpline2Len=-rRec.nHelpline2Len;
+            if (bOrtho) rRec.nHelpline1Len=rRec.nHelpline2Len;
+        } break;
+        case 2: case 3: {
+            bool bAnf=nHdlNum==2;
+            Point& rMov=bAnf ? rRec.aPt1 : rRec.aPt2;
+            Point aMov(rMov);
+            Point aFix(bAnf ? rRec.aPt2 : rRec.aPt1);
+            if (bOrtho) {
+                long ndx0=aMov.X()-aFix.X();
+                long ndy0=aMov.Y()-aFix.Y();
+                bool bHLin=ndy0==0;
+                bool bVLin=ndx0==0;
+                if (!bHLin || !bVLin) { // else aPt1==aPt2
+                    long ndx=aPt.X()-aFix.X();
+                    long ndy=aPt.Y()-aFix.Y();
+                    double nXFact=0; if (!bVLin) nXFact=static_cast<double>(ndx)/static_cast<double>(ndx0);
+                    double nYFact=0; if (!bHLin) nYFact=static_cast<double>(ndy)/static_cast<double>(ndy0);
+                    bool bHor=bHLin || (!bVLin && (nXFact>nYFact) ==bBigOrtho);
+                    bool bVer=bVLin || (!bHLin && (nXFact<=nYFact)==bBigOrtho);
+                    if (bHor) ndy=long(ndy0*nXFact);
+                    if (bVer) ndx=long(ndx0*nYFact);
+                    aPt=aFix;
+                    aPt.AdjustX(ndx );
+                    aPt.AdjustY(ndy );
+                } // else Ortho8
+            }
+            rMov=aPt;
+        } break;
+        case 4: case 5: {
+            long nVal0=rRec.nLineDist;
+            RotatePoint(aPt,(nHdlNum==4 ? aPt1 : aPt2),nSin,-nCos);
+            rRec.nLineDist=aPt.Y()- (nHdlNum==4 ? aPt1.Y() : aPt2.Y());
+            if (bBelow) rRec.nLineDist=-rRec.nLineDist;
+            if (rRec.nLineDist<0) {
+                rRec.nLineDist=-rRec.nLineDist;
+                rRec.bBelowRefEdge=!bBelow;
+            }
+            rRec.nLineDist-=rRec.nHelplineOverhang;
+            if (bOrtho) rRec.nLineDist=nVal0;
+        } break;
+    } // switch
+}
+
+
+bool SdrMeasureObj::BegCreate(SdrDragStat& rStat)
+{
+    rStat.SetOrtho8Possible();
+    aPt1=rStat.GetStart();
+    aPt2=rStat.GetNow();
+    SetTextDirty();
+    return true;
+}
+
+bool SdrMeasureObj::MovCreate(SdrDragStat& rStat)
+{
+    SdrView* pView=rStat.GetView();
+    aPt1=rStat.GetStart();
+    aPt2=rStat.GetNow();
+    if (pView!=nullptr && pView->IsCreate1stPointAsCenter()) {
+        aPt1+=aPt1;
+        aPt1-=rStat.GetNow();
+    }
+    SetTextDirty();
+    SetBoundRectDirty();
+    bSnapRectDirty=true;
+    return true;
+}
+
+bool SdrMeasureObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    SetTextDirty();
+    SetRectsDirty();
+    return (eCmd==SdrCreateCmd::ForceEnd || rStat.GetPointCount()>=2);
+}
+
+bool SdrMeasureObj::BckCreate(SdrDragStat& /*rStat*/)
+{
+    return false;
+}
+
+void SdrMeasureObj::BrkCreate(SdrDragStat& /*rStat*/)
+{
+}
+
+basegfx::B2DPolyPolygon SdrMeasureObj::TakeCreatePoly(const SdrDragStat& /*rDrag*/) const
+{
+    ImpMeasureRec aRec;
+    ImpMeasurePoly aMPol;
+
+    ImpTakeAttr(aRec);
+    ImpCalcGeometrics(aRec, aMPol);
+
+    return ImpCalcXPoly(aMPol);
+}
+
+PointerStyle SdrMeasureObj::GetCreatePointer() const
+{
+    return PointerStyle::Cross;
+}
+
+void SdrMeasureObj::NbcMove(const Size& rSiz)
+{
+    SdrTextObj::NbcMove(rSiz);
+    aPt1.Move(rSiz);
+    aPt2.Move(rSiz);
+}
+
+void SdrMeasureObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    SdrTextObj::NbcResize(rRef,xFact,yFact);
+    ResizePoint(aPt1,rRef,xFact,yFact);
+    ResizePoint(aPt2,rRef,xFact,yFact);
+    SetTextDirty();
+}
+
+void SdrMeasureObj::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    SdrTextObj::NbcRotate(rRef,nAngle,sn,cs);
+    long nLen0=GetLen(aPt2-aPt1);
+    RotatePoint(aPt1,rRef,sn,cs);
+    RotatePoint(aPt2,rRef,sn,cs);
+    long nLen1=GetLen(aPt2-aPt1);
+    if (nLen1!=nLen0) { // rounding error!
+        long dx=aPt2.X()-aPt1.X();
+        long dy=aPt2.Y()-aPt1.Y();
+        dx=BigMulDiv(dx,nLen0,nLen1);
+        dy=BigMulDiv(dy,nLen0,nLen1);
+        if (rRef==aPt2) {
+            aPt1.setX(aPt2.X()-dx );
+            aPt1.setY(aPt2.Y()-dy );
+        } else {
+            aPt2.setX(aPt1.X()+dx );
+            aPt2.setY(aPt1.Y()+dy );
+        }
+    }
+    SetRectsDirty();
+}
+
+void SdrMeasureObj::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    SdrTextObj::NbcMirror(rRef1,rRef2);
+    MirrorPoint(aPt1,rRef1,rRef2);
+    MirrorPoint(aPt2,rRef1,rRef2);
+    SetRectsDirty();
+}
+
+void SdrMeasureObj::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    SdrTextObj::NbcShear(rRef,nAngle,tn,bVShear);
+    ShearPoint(aPt1,rRef,tn,bVShear);
+    ShearPoint(aPt2,rRef,tn,bVShear);
+    SetRectsDirty();
+    SetTextDirty();
+}
+
+long SdrMeasureObj::GetRotateAngle() const
+{
+    return GetAngle(aPt2-aPt1);
+}
+
+void SdrMeasureObj::RecalcSnapRect()
+{
+    ImpMeasureRec aRec;
+    ImpMeasurePoly aMPol;
+    XPolyPolygon aXPP;
+
+    ImpTakeAttr(aRec);
+    ImpCalcGeometrics(aRec, aMPol);
+    aXPP = XPolyPolygon(ImpCalcXPoly(aMPol));
+    maSnapRect = aXPP.GetBoundRect();
+}
+
+sal_uInt32 SdrMeasureObj::GetSnapPointCount() const
+{
+    return 2;
+}
+
+Point SdrMeasureObj::GetSnapPoint(sal_uInt32 i) const
+{
+    if (i==0) return aPt1;
+    else return aPt2;
+}
+
+bool SdrMeasureObj::IsPolyObj() const
+{
+    return true;
+}
+
+sal_uInt32 SdrMeasureObj::GetPointCount() const
+{
+    return 2;
+}
+
+Point SdrMeasureObj::GetPoint(sal_uInt32 i) const
+{
+     return (0 == i) ? aPt1 : aPt2;
+}
+
+void SdrMeasureObj::NbcSetPoint(const Point& rPnt, sal_uInt32 i)
+{
+    if (0 == i)
+        aPt1=rPnt;
+    if (1 == i)
+        aPt2=rPnt;
+    SetRectsDirty();
+    SetTextDirty();
+}
+
+SdrObjGeoData* SdrMeasureObj::NewGeoData() const
+{
+    return new SdrMeasureObjGeoData;
+}
+
+void SdrMeasureObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrTextObj::SaveGeoData(rGeo);
+    SdrMeasureObjGeoData& rMGeo=static_cast<SdrMeasureObjGeoData&>(rGeo);
+    rMGeo.aPt1=aPt1;
+    rMGeo.aPt2=aPt2;
+}
+
+void SdrMeasureObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrTextObj::RestGeoData(rGeo);
+    const SdrMeasureObjGeoData& rMGeo=static_cast<const SdrMeasureObjGeoData&>(rGeo);
+    aPt1=rMGeo.aPt1;
+    aPt2=rMGeo.aPt2;
+    SetTextDirty();
+}
+
+SdrObjectUniquePtr SdrMeasureObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    // get XOR Poly as base
+    XPolyPolygon aTmpPolyPolygon(TakeXorPoly());
+
+    // get local ItemSet and StyleSheet
+    SfxItemSet aSet(GetObjectItemSet());
+    SfxStyleSheet* pStyleSheet = GetStyleSheet();
+
+    // prepare group
+    std::unique_ptr<SdrObjGroup,SdrObjectFreeOp> pGroup(new SdrObjGroup(getSdrModelFromSdrObject()));
+
+    // prepare parameters
+    basegfx::B2DPolyPolygon aPolyPoly;
+    SdrPathObj* pPath;
+    sal_uInt16 nCount(aTmpPolyPolygon.Count());
+    sal_uInt16 nLoopStart(0);
+
+    if(nCount == 3)
+    {
+        // three lines, first one is the middle one
+        aPolyPoly.clear();
+        aPolyPoly.append(aTmpPolyPolygon[0].getB2DPolygon());
+
+        pPath = new SdrPathObj(
+            getSdrModelFromSdrObject(),
+            OBJ_PATHLINE,
+            aPolyPoly);
+
+        pPath->SetMergedItemSet(aSet);
+        pPath->SetStyleSheet(pStyleSheet, true);
+        pGroup->GetSubList()->NbcInsertObject(pPath);
+        aSet.Put(XLineStartWidthItem(0));
+        aSet.Put(XLineEndWidthItem(0));
+        nLoopStart = 1;
+    }
+    else if(nCount == 4)
+    {
+        // four lines, middle line with gap, so there are two lines used
+        // which have one arrow each
+        sal_Int32 nEndWidth = aSet.Get(XATTR_LINEENDWIDTH).GetValue();
+        aSet.Put(XLineEndWidthItem(0));
+
+        aPolyPoly.clear();
+        aPolyPoly.append(aTmpPolyPolygon[0].getB2DPolygon());
+        pPath = new SdrPathObj(
+            getSdrModelFromSdrObject(),
+            OBJ_PATHLINE,
+            aPolyPoly);
+
+        pPath->SetMergedItemSet(aSet);
+        pPath->SetStyleSheet(pStyleSheet, true);
+
+        pGroup->GetSubList()->NbcInsertObject(pPath);
+
+        aSet.Put(XLineEndWidthItem(nEndWidth));
+        aSet.Put(XLineStartWidthItem(0));
+
+        aPolyPoly.clear();
+        aPolyPoly.append(aTmpPolyPolygon[1].getB2DPolygon());
+        pPath = new SdrPathObj(
+            getSdrModelFromSdrObject(),
+            OBJ_PATHLINE,
+            aPolyPoly);
+
+        pPath->SetMergedItemSet(aSet);
+        pPath->SetStyleSheet(pStyleSheet, true);
+
+        pGroup->GetSubList()->NbcInsertObject(pPath);
+
+        aSet.Put(XLineEndWidthItem(0));
+        nLoopStart = 2;
+    }
+    else if(nCount == 5)
+    {
+        // five lines, first two are the outer ones
+        sal_Int32 nEndWidth = aSet.Get(XATTR_LINEENDWIDTH).GetValue();
+
+        aSet.Put(XLineEndWidthItem(0));
+
+        aPolyPoly.clear();
+        aPolyPoly.append(aTmpPolyPolygon[0].getB2DPolygon());
+        pPath = new SdrPathObj(
+            getSdrModelFromSdrObject(),
+            OBJ_PATHLINE,
+            aPolyPoly);
+
+        pPath->SetMergedItemSet(aSet);
+        pPath->SetStyleSheet(pStyleSheet, true);
+
+        pGroup->GetSubList()->NbcInsertObject(pPath);
+
+        aSet.Put(XLineEndWidthItem(nEndWidth));
+        aSet.Put(XLineStartWidthItem(0));
+
+        aPolyPoly.clear();
+        aPolyPoly.append(aTmpPolyPolygon[1].getB2DPolygon());
+        pPath = new SdrPathObj(
+            getSdrModelFromSdrObject(),
+            OBJ_PATHLINE,
+            aPolyPoly);
+
+        pPath->SetMergedItemSet(aSet);
+        pPath->SetStyleSheet(pStyleSheet, true);
+
+        pGroup->GetSubList()->NbcInsertObject(pPath);
+
+        aSet.Put(XLineEndWidthItem(0));
+        nLoopStart = 2;
+    }
+
+    for(;nLoopStart<nCount;nLoopStart++)
+    {
+        aPolyPoly.clear();
+        aPolyPoly.append(aTmpPolyPolygon[nLoopStart].getB2DPolygon());
+        pPath = new SdrPathObj(
+            getSdrModelFromSdrObject(),
+            OBJ_PATHLINE,
+            aPolyPoly);
+
+        pPath->SetMergedItemSet(aSet);
+        pPath->SetStyleSheet(pStyleSheet, true);
+
+        pGroup->GetSubList()->NbcInsertObject(pPath);
+    }
+
+    if(bAddText)
+    {
+        return ImpConvertAddText(std::move(pGroup), bBezier);
+    }
+    else
+    {
+        return pGroup;
+    }
+}
+
+bool SdrMeasureObj::BegTextEdit(SdrOutliner& rOutl)
+{
+    UndirtyText();
+    return SdrTextObj::BegTextEdit(rOutl);
+}
+
+const Size& SdrMeasureObj::GetTextSize() const
+{
+    if (bTextDirty) UndirtyText();
+    return SdrTextObj::GetTextSize();
+}
+
+OutlinerParaObject* SdrMeasureObj::GetOutlinerParaObject() const
+{
+    if(bTextDirty)
+        UndirtyText();
+    return SdrTextObj::GetOutlinerParaObject();
+}
+
+void SdrMeasureObj::NbcSetOutlinerParaObject(std::unique_ptr<OutlinerParaObject> pTextObject)
+{
+    SdrTextObj::NbcSetOutlinerParaObject(std::move(pTextObject));
+    if(SdrTextObj::GetOutlinerParaObject())
+        SetTextDirty(); // recalculate text
+}
+
+void SdrMeasureObj::TakeTextRect( SdrOutliner& rOutliner, tools::Rectangle& rTextRect, bool bNoEditText,
+    tools::Rectangle* pAnchorRect, bool bLineWidth ) const
+{
+    if (bTextDirty) UndirtyText();
+    SdrTextObj::TakeTextRect( rOutliner, rTextRect, bNoEditText, pAnchorRect, bLineWidth );
+}
+
+void SdrMeasureObj::TakeTextAnchorRect(tools::Rectangle& rAnchorRect) const
+{
+    if (bTextDirty) UndirtyText();
+    SdrTextObj::TakeTextAnchorRect(rAnchorRect);
+}
+
+void SdrMeasureObj::TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, tools::Rectangle* pViewInit, tools::Rectangle* pViewMin) const
+{
+    if (bTextDirty) UndirtyText();
+    SdrTextObj::TakeTextEditArea(pPaperMin,pPaperMax,pViewInit,pViewMin);
+}
+
+EEAnchorMode SdrMeasureObj::GetOutlinerViewAnchorMode() const
+{
+    if (bTextDirty) UndirtyText();
+    ImpMeasureRec aRec;
+    ImpMeasurePoly aMPol;
+    ImpTakeAttr(aRec);
+    ImpCalcGeometrics(aRec,aMPol);
+
+    SdrTextHorzAdjust eTH=GetTextHorizontalAdjust();
+    SdrTextVertAdjust eTV=GetTextVerticalAdjust();
+    css::drawing::MeasureTextHorzPos eMH = aMPol.eUsedTextHPos;
+    css::drawing::MeasureTextVertPos eMV = aMPol.eUsedTextVPos;
+    bool bTextRota90=aRec.bTextRota90;
+    bool bBelowRefEdge=aRec.bBelowRefEdge;
+
+    // TODO: bTextUpsideDown should be interpreted here!
+    if (!bTextRota90) {
+        if (eMH==css::drawing::MeasureTextHorzPos_LEFTOUTSIDE) eTH=SDRTEXTHORZADJUST_RIGHT;
+        if (eMH==css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE) eTH=SDRTEXTHORZADJUST_LEFT;
+        // at eMH==css::drawing::MeasureTextHorzPos_INSIDE we can anchor horizontally
+        if (eMV==css::drawing::MeasureTextVertPos_EAST) eTV=SDRTEXTVERTADJUST_BOTTOM;
+        if (eMV==css::drawing::MeasureTextVertPos_WEST) eTV=SDRTEXTVERTADJUST_TOP;
+        if (eMV==css::drawing::MeasureTextVertPos_CENTERED) eTV=SDRTEXTVERTADJUST_CENTER;
+    } else {
+        if (eMH==css::drawing::MeasureTextHorzPos_LEFTOUTSIDE) eTV=SDRTEXTVERTADJUST_BOTTOM;
+        if (eMH==css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE) eTV=SDRTEXTVERTADJUST_TOP;
+        // at eMH==css::drawing::MeasureTextHorzPos_INSIDE we can anchor vertically
+        if (!bBelowRefEdge) {
+            if (eMV==css::drawing::MeasureTextVertPos_EAST) eTH=SDRTEXTHORZADJUST_LEFT;
+            if (eMV==css::drawing::MeasureTextVertPos_WEST) eTH=SDRTEXTHORZADJUST_RIGHT;
+        } else {
+            if (eMV==css::drawing::MeasureTextVertPos_EAST) eTH=SDRTEXTHORZADJUST_RIGHT;
+            if (eMV==css::drawing::MeasureTextVertPos_WEST) eTH=SDRTEXTHORZADJUST_LEFT;
+        }
+        if (eMV==css::drawing::MeasureTextVertPos_CENTERED) eTH=SDRTEXTHORZADJUST_CENTER;
+    }
+
+    EEAnchorMode eRet=EEAnchorMode::BottomHCenter;
+    if (eTH==SDRTEXTHORZADJUST_LEFT) {
+        if (eTV==SDRTEXTVERTADJUST_TOP) eRet=EEAnchorMode::TopLeft;
+        else if (eTV==SDRTEXTVERTADJUST_BOTTOM) eRet=EEAnchorMode::BottomLeft;
+        else eRet=EEAnchorMode::VCenterLeft;
+    } else if (eTH==SDRTEXTHORZADJUST_RIGHT) {
+        if (eTV==SDRTEXTVERTADJUST_TOP) eRet=EEAnchorMode::TopRight;
+        else if (eTV==SDRTEXTVERTADJUST_BOTTOM) eRet=EEAnchorMode::BottomRight;
+        else eRet=EEAnchorMode::VCenterRight;
+    } else {
+        if (eTV==SDRTEXTVERTADJUST_TOP) eRet=EEAnchorMode::TopHCenter;
+        else if (eTV==SDRTEXTVERTADJUST_BOTTOM) eRet=EEAnchorMode::BottomHCenter;
+        else eRet=EEAnchorMode::VCenterHCenter;
+    }
+    return eRet;
+}
+
+
+// #i97878#
+// TRGetBaseGeometry/TRSetBaseGeometry needs to be based on two positions,
+// same as line geometry in SdrPathObj. Thus needs to be overridden and
+// implemented since currently it is derived from SdrTextObj which uses
+// a functionality based on SnapRect which is not useful here
+
+bool SdrMeasureObj::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const
+{
+    // handle the same as a simple line since the definition is based on two points
+    const basegfx::B2DRange aRange(aPt1.X(), aPt1.Y(), aPt2.X(), aPt2.Y());
+    basegfx::B2DTuple aScale(aRange.getRange());
+    basegfx::B2DTuple aTranslate(aRange.getMinimum());
+
+    // position maybe relative to anchor position, convert
+    if( getSdrModelFromSdrObject().IsWriter() )
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build return value matrix
+    rMatrix = basegfx::utils::createScaleTranslateB2DHomMatrix(aScale, aTranslate);
+
+    return true;
+}
+
+void SdrMeasureObj::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/)
+{
+    // use given transformation to derive the two defining points from unit line
+    basegfx::B2DPoint aPosA(rMatrix * basegfx::B2DPoint(0.0, 0.0));
+    basegfx::B2DPoint aPosB(rMatrix * basegfx::B2DPoint(1.0, 0.0));
+
+    if( getSdrModelFromSdrObject().IsWriter() )
+    {
+        // if anchor is used, make position relative to it
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            const basegfx::B2DVector aAnchorOffset(GetAnchorPos().X(), GetAnchorPos().Y());
+
+            aPosA += aAnchorOffset;
+            aPosB += aAnchorOffset;
+        }
+    }
+
+    // derive new model data
+    const Point aNewPt1(basegfx::fround(aPosA.getX()), basegfx::fround(aPosA.getY()));
+    const Point aNewPt2(basegfx::fround(aPosB.getX()), basegfx::fround(aPosB.getY()));
+
+    if(aNewPt1 != aPt1 || aNewPt2 != aPt2)
+    {
+        // set model values and broadcast
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+
+        aPt1 = aNewPt1;
+        aPt2 = aNewPt2;
+
+        SetTextDirty();
+        ActionChanged();
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdomedia.cxx b/svx/source/svdraw/svdomedia.cxx
new file mode 100644
index 000000000..886ff96fd
--- /dev/null
+++ b/svx/source/svdraw/svdomedia.cxx
@@ -0,0 +1,402 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4; fill-column:100 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <config_features.h>
+
+#include <svx/svdomedia.hxx>
+
+#include <rtl/ustring.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <sal/log.hxx>
+
+#include <ucbhelper/content.hxx>
+#include <comphelper/processfactory.hxx>
+#include <comphelper/storagehelper.hxx>
+
+#include <vcl/svapp.hxx>
+
+#include <svx/svdmodel.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/sdr/contact/viewcontactofsdrmediaobj.hxx>
+#include <avmedia/mediawindow.hxx>
+#include <tools/diagnose_ex.h>
+
+using namespace ::com::sun::star;
+
+
+struct SdrMediaObj::Impl
+{
+    ::avmedia::MediaItem                  m_MediaProperties;
+    // Note: the temp file is read only, until it is deleted!
+    // It may be shared between multiple documents in case of copy/paste,
+    // hence the shared_ptr.
+    std::shared_ptr< ::avmedia::MediaTempFile >  m_pTempFile;
+    uno::Reference< graphic::XGraphic >   m_xCachedSnapshot;
+    OUString m_LastFailedPkgURL;
+};
+
+SdrMediaObj::SdrMediaObj(SdrModel& rSdrModel)
+:   SdrRectObj(rSdrModel)
+    ,m_xImpl( new Impl )
+{
+}
+
+SdrMediaObj::SdrMediaObj(
+    SdrModel& rSdrModel,
+    const tools::Rectangle& rRect)
+:   SdrRectObj(rSdrModel, rRect)
+    ,m_xImpl( new Impl )
+{
+}
+
+SdrMediaObj::~SdrMediaObj()
+{
+}
+
+bool SdrMediaObj::HasTextEdit() const
+{
+    return false;
+}
+
+std::unique_ptr<sdr::contact::ViewContact> SdrMediaObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrMediaObj>( *this );
+}
+
+void SdrMediaObj::TakeObjInfo( SdrObjTransformInfoRec& rInfo ) const
+{
+    rInfo.bMoveAllowed = true;
+    rInfo.bResizeFreeAllowed = true;
+    rInfo.bResizePropAllowed = true;
+    rInfo.bRotateFreeAllowed = false;
+    rInfo.bRotate90Allowed = false;
+    rInfo.bMirrorFreeAllowed = false;
+    rInfo.bMirror45Allowed = false;
+    rInfo.bMirror90Allowed = false;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed = false;
+    rInfo.bEdgeRadiusAllowed = false;
+    rInfo.bNoOrthoDesired = false;
+    rInfo.bNoContortion = false;
+    rInfo.bCanConvToPath = false;
+    rInfo.bCanConvToPoly = false;
+    rInfo.bCanConvToContour = false;
+    rInfo.bCanConvToPathLineToArea = false;
+    rInfo.bCanConvToPolyLineToArea = false;
+}
+
+sal_uInt16 SdrMediaObj::GetObjIdentifier() const
+{
+    return sal_uInt16( OBJ_MEDIA );
+}
+
+OUString SdrMediaObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulMEDIA));
+
+    OUString aName(GetName());
+
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrMediaObj::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralMEDIA);
+}
+
+SdrMediaObj* SdrMediaObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrMediaObj >(rTargetModel);
+}
+
+SdrMediaObj& SdrMediaObj::operator=(const SdrMediaObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrRectObj::operator=( rObj );
+
+    m_xImpl->m_pTempFile = rObj.m_xImpl->m_pTempFile; // before props
+    setMediaProperties( rObj.getMediaProperties() );
+    m_xImpl->m_xCachedSnapshot = rObj.m_xImpl->m_xCachedSnapshot;
+    return *this;
+}
+
+uno::Reference< graphic::XGraphic > const & SdrMediaObj::getSnapshot() const
+{
+#if HAVE_FEATURE_AVMEDIA
+    if( !m_xImpl->m_xCachedSnapshot.is() )
+    {
+        OUString aRealURL = m_xImpl->m_MediaProperties.getTempURL();
+        if( aRealURL.isEmpty() )
+            aRealURL = m_xImpl->m_MediaProperties.getURL();
+        m_xImpl->m_xCachedSnapshot = avmedia::MediaWindow::grabFrame( aRealURL, m_xImpl->m_MediaProperties.getReferer(), m_xImpl->m_MediaProperties.getMimeType());
+    }
+#endif
+    return m_xImpl->m_xCachedSnapshot;
+}
+
+void SdrMediaObj::AdjustToMaxRect( const tools::Rectangle& rMaxRect, bool bShrinkOnly /* = false */ )
+{
+    Size aSize( Application::GetDefaultDevice()->PixelToLogic(
+                    static_cast< sdr::contact::ViewContactOfSdrMediaObj& >( GetViewContact() ).getPreferredSize(),
+                    MapMode(MapUnit::Map100thMM)) );
+    Size aMaxSize( rMaxRect.GetSize() );
+
+    if( !aSize.IsEmpty() )
+    {
+        Point aPos( rMaxRect.TopLeft() );
+
+        // if graphic is too large, fit it to the page
+        if ( (!bShrinkOnly                          ||
+             ( aSize.Height() > aMaxSize.Height() ) ||
+             ( aSize.Width()  > aMaxSize.Width()  ) )&&
+             aSize.Height() && aMaxSize.Height() )
+        {
+            float fGrfWH =  static_cast<float>(aSize.Width()) /
+                            static_cast<float>(aSize.Height());
+            float fWinWH =  static_cast<float>(aMaxSize.Width()) /
+                            static_cast<float>(aMaxSize.Height());
+
+            // scale graphic to page size
+            if ( fGrfWH < fWinWH )
+            {
+                aSize.setWidth( static_cast<long>(aMaxSize.Height() * fGrfWH) );
+                aSize.setHeight( aMaxSize.Height() );
+            }
+            else if ( fGrfWH > 0.F )
+            {
+                aSize.setWidth( aMaxSize.Width() );
+                aSize.setHeight( static_cast<long>(aMaxSize.Width() / fGrfWH) );
+            }
+
+            aPos = rMaxRect.Center();
+        }
+
+        if( bShrinkOnly )
+            aPos = maRect.TopLeft();
+
+        aPos.AdjustX( -(aSize.Width() / 2) );
+        aPos.AdjustY( -(aSize.Height() / 2) );
+        SetLogicRect( tools::Rectangle( aPos, aSize ) );
+    }
+}
+
+void SdrMediaObj::setURL( const OUString& rURL, const OUString& rReferer, const OUString& rMimeType )
+{
+    ::avmedia::MediaItem aURLItem;
+#if HAVE_FEATURE_AVMEDIA
+    if( !rMimeType.isEmpty() )
+        m_xImpl->m_MediaProperties.setMimeType(rMimeType);
+    aURLItem.setURL( rURL, "", rReferer );
+#else
+    (void) rMimeType;
+    (void) rURL;
+    (void) rReferer;
+#endif
+    setMediaProperties( aURLItem );
+}
+
+const OUString& SdrMediaObj::getURL() const
+{
+#if HAVE_FEATURE_AVMEDIA
+    return m_xImpl->m_MediaProperties.getURL();
+#else
+static OUString ret;
+    return ret;
+#endif
+}
+
+void SdrMediaObj::setMediaProperties( const ::avmedia::MediaItem& rState )
+{
+    mediaPropertiesChanged( rState );
+    static_cast< sdr::contact::ViewContactOfSdrMediaObj& >( GetViewContact() ).executeMediaItem( getMediaProperties() );
+}
+
+const ::avmedia::MediaItem& SdrMediaObj::getMediaProperties() const
+{
+    return m_xImpl->m_MediaProperties;
+}
+
+uno::Reference<io::XInputStream> SdrMediaObj::GetInputStream() const
+{
+    if (!m_xImpl->m_pTempFile)
+    {
+        SAL_WARN("svx", "this is only intended for embedded media");
+        return nullptr;
+    }
+    ucbhelper::Content tempFile(m_xImpl->m_pTempFile->m_TempFileURL,
+                uno::Reference<ucb::XCommandEnvironment>(),
+                comphelper::getProcessComponentContext());
+    return tempFile.openStream();
+}
+
+void SdrMediaObj::SetInputStream(uno::Reference<io::XInputStream> const& xStream)
+{
+    if (m_xImpl->m_pTempFile || m_xImpl->m_LastFailedPkgURL.isEmpty())
+    {
+        SAL_WARN("svx", "this is only intended for embedded media");
+        return;
+    }
+
+    OUString tempFileURL;
+    const bool bSuccess(
+        ::avmedia::CreateMediaTempFile(
+            xStream,
+            tempFileURL,
+            ""));
+
+    if (bSuccess)
+    {
+        m_xImpl->m_pTempFile = std::make_shared<::avmedia::MediaTempFile>(tempFileURL);
+#if HAVE_FEATURE_AVMEDIA
+        m_xImpl->m_MediaProperties.setURL(
+            m_xImpl->m_LastFailedPkgURL, tempFileURL, "");
+#endif
+    }
+    m_xImpl->m_LastFailedPkgURL.clear(); // once only
+}
+
+/// copy a stream from XStorage to temp file
+#if HAVE_FEATURE_AVMEDIA
+static bool lcl_HandlePackageURL(
+    OUString const & rURL,
+    const SdrModel& rModel,
+    OUString & o_rTempFileURL)
+{
+    ::comphelper::LifecycleProxy sourceProxy;
+    uno::Reference<io::XInputStream> xInStream;
+    try {
+        xInStream = rModel.GetDocumentStream(rURL, sourceProxy);
+    }
+    catch (container::NoSuchElementException const&)
+    {
+        SAL_INFO("svx", "not found: '" << rURL << "'");
+        return false;
+    }
+    catch (uno::Exception const&)
+    {
+        TOOLS_WARN_EXCEPTION("svx", "");
+        return false;
+    }
+    if (!xInStream.is())
+    {
+        SAL_WARN("svx", "no stream?");
+        return false;
+    }
+    // Make sure the temporary copy has the same file name extension as the original media file
+    // (like .mp4). That seems to be important for some AVFoundation APIs. For random extension-less
+    // file names, they don't seem to even bother looking inside the file.
+    sal_Int32 nLastDot = rURL.lastIndexOf('.');
+    sal_Int32 nLastSlash = rURL.lastIndexOf('/');
+    OUString sDesiredExtension;
+    if (nLastDot > nLastSlash && nLastDot+1 < rURL.getLength())
+        sDesiredExtension = rURL.copy(nLastDot);
+    return ::avmedia::CreateMediaTempFile(xInStream, o_rTempFileURL, sDesiredExtension);
+}
+#endif
+
+void SdrMediaObj::mediaPropertiesChanged( const ::avmedia::MediaItem& rNewProperties )
+{
+    bool bBroadcastChanged = false;
+#if HAVE_FEATURE_AVMEDIA
+    const AVMediaSetMask nMaskSet = rNewProperties.getMaskSet();
+
+    // use only a subset of MediaItem properties for own properties
+    if( AVMediaSetMask::MIME_TYPE & nMaskSet )
+        m_xImpl->m_MediaProperties.setMimeType( rNewProperties.getMimeType() );
+
+    if( ( AVMediaSetMask::URL & nMaskSet ) &&
+        ( rNewProperties.getURL() != getURL() ))
+    {
+        m_xImpl->m_xCachedSnapshot.clear();
+        OUString const& url(rNewProperties.getURL());
+        if (url.startsWithIgnoreAsciiCase("vnd.sun.star.Package:"))
+        {
+            if (   !m_xImpl->m_pTempFile
+                || (m_xImpl->m_pTempFile->m_TempFileURL !=
+                                rNewProperties.getTempURL()))
+            {
+                OUString tempFileURL;
+                const bool bSuccess(
+                    lcl_HandlePackageURL(
+                        url,
+                        getSdrModelFromSdrObject(),
+                        tempFileURL));
+
+                if (bSuccess)
+                {
+                    m_xImpl->m_pTempFile =
+                            std::make_shared<::avmedia::MediaTempFile>(tempFileURL);
+                    m_xImpl->m_MediaProperties.setURL(url, tempFileURL, "");
+                }
+                else // this case is for Clone via operator=
+                {
+                    m_xImpl->m_pTempFile.reset();
+                    m_xImpl->m_MediaProperties.setURL("", "", "");
+                    // UGLY: oox import also gets here, because unlike ODF
+                    // getDocumentStorage() is not the imported file...
+                    m_xImpl->m_LastFailedPkgURL = url;
+                }
+            }
+            else
+            {
+                m_xImpl->m_MediaProperties.setURL(url,
+                        rNewProperties.getTempURL(), "");
+            }
+        }
+        else
+        {
+            m_xImpl->m_pTempFile.reset();
+            m_xImpl->m_MediaProperties.setURL(url, "", rNewProperties.getReferer());
+        }
+        bBroadcastChanged = true;
+    }
+
+    if( AVMediaSetMask::LOOP & nMaskSet )
+        m_xImpl->m_MediaProperties.setLoop( rNewProperties.isLoop() );
+
+    if( AVMediaSetMask::MUTE & nMaskSet )
+        m_xImpl->m_MediaProperties.setMute( rNewProperties.isMute() );
+
+    if( AVMediaSetMask::VOLUMEDB & nMaskSet )
+        m_xImpl->m_MediaProperties.setVolumeDB( rNewProperties.getVolumeDB() );
+
+    if( AVMediaSetMask::ZOOM & nMaskSet )
+        m_xImpl->m_MediaProperties.setZoom( rNewProperties.getZoom() );
+#else
+    (void) rNewProperties;
+#endif
+
+    if( bBroadcastChanged )
+    {
+        SetChanged();
+        BroadcastObjectChange();
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdoole2.cxx b/svx/source/svdraw/svdoole2.cxx
new file mode 100644
index 000000000..65b30eaed
--- /dev/null
+++ b/svx/source/svdraw/svdoole2.cxx
@@ -0,0 +1,1946 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdoole2.hxx>
+
+#include <com/sun/star/beans/XPropertySet.hpp>
+#include <com/sun/star/util/XModifyBroadcaster.hpp>
+#include <com/sun/star/util/XModifiable.hpp>
+#include <com/sun/star/embed/EmbedStates.hpp>
+#include <com/sun/star/embed/EmbedMisc.hpp>
+#include <com/sun/star/embed/Aspects.hpp>
+#include <com/sun/star/embed/ObjectSaveVetoException.hpp>
+#include <com/sun/star/embed/XEmbeddedObject.hpp>
+#include <com/sun/star/embed/XEmbedPersist2.hpp>
+#include <com/sun/star/embed/XInplaceClient.hpp>
+#include <com/sun/star/embed/XInplaceObject.hpp>
+#include <com/sun/star/embed/XLinkageSupport.hpp>
+#include <com/sun/star/embed/NoVisualAreaSizeException.hpp>
+#include <com/sun/star/embed/XWindowSupplier.hpp>
+#include <com/sun/star/document/XEventListener.hpp>
+#include <com/sun/star/container/XChild.hpp>
+#include <com/sun/star/document/XStorageBasedDocument.hpp>
+#include <com/sun/star/lang/WrappedTargetRuntimeException.hpp>
+
+#include <cppuhelper/exc_hlp.hxx>
+
+#include <toolkit/helper/vclunohelper.hxx>
+#include <toolkit/helper/convert.hxx>
+
+#include <svtools/colorcfg.hxx>
+#include <svtools/embedhlp.hxx>
+
+#include <sfx2/objsh.hxx>
+#include <sfx2/ipclient.hxx>
+#include <sfx2/lnkbase.hxx>
+#include <tools/debug.hxx>
+#include <tools/globname.hxx>
+#include <tools/diagnose_ex.h>
+#include <comphelper/classids.hxx>
+
+#include <sot/formats.hxx>
+#include <cppuhelper/implbase.hxx>
+
+#include <vcl/svapp.hxx>
+
+#include <svx/svdmodel.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdetc.hxx>
+#include <unomlstr.hxx>
+#include <sdr/contact/viewcontactofsdrole2obj.hxx>
+#include <svx/svdograf.hxx>
+#include <sdr/properties/oleproperties.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xbtmpit.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflbmtit.hxx>
+#include <svx/xflbstit.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/polygon/b2dpolypolygon.hxx>
+#include <editeng/outlobj.hxx>
+#include <svx/svdpage.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <rtl/ref.hxx>
+#include <bitmaps.hlst>
+
+using namespace ::com::sun::star;
+
+static uno::Reference < beans::XPropertySet > lcl_getFrame_throw(const SdrOle2Obj* _pObject)
+{
+    uno::Reference < beans::XPropertySet > xFrame;
+    if ( _pObject )
+    {
+        uno::Reference< frame::XController> xController = _pObject->GetParentXModel()->getCurrentController();
+        if ( xController.is() )
+        {
+            xFrame.set( xController->getFrame(),uno::UNO_QUERY_THROW);
+        }
+    } // if ( _pObject )
+    return xFrame;
+}
+
+namespace {
+
+class SdrLightEmbeddedClient_Impl : public ::cppu::WeakImplHelper
+                                                            < embed::XStateChangeListener
+                                                            , document::XEventListener
+                                                            , embed::XInplaceClient
+                                                            , embed::XEmbeddedClient
+                                                            , embed::XWindowSupplier
+                                                            >
+{
+    uno::Reference< awt::XWindow > m_xWindow;
+    SdrOle2Obj* mpObj;
+
+    Fraction m_aScaleWidth;
+    Fraction m_aScaleHeight;
+
+
+public:
+    explicit SdrLightEmbeddedClient_Impl( SdrOle2Obj* pObj );
+    virtual ~SdrLightEmbeddedClient_Impl() override;
+
+    void SetSizeScale( const Fraction& aScaleWidth, const Fraction& aScaleHeight )
+    {
+        m_aScaleWidth = aScaleWidth;
+        m_aScaleHeight = aScaleHeight;
+    }
+
+    const Fraction& GetScaleWidth() const { return m_aScaleWidth; }
+    const Fraction& GetScaleHeight() const { return m_aScaleHeight; }
+
+    void setWindow(const uno::Reference< awt::XWindow >& _xWindow);
+
+    void disconnect();
+private:
+
+    tools::Rectangle impl_getScaledRect_nothrow() const;
+    // XStateChangeListener
+    virtual void SAL_CALL changingState( const css::lang::EventObject& aEvent, ::sal_Int32 nOldState, ::sal_Int32 nNewState ) override;
+    virtual void SAL_CALL stateChanged( const css::lang::EventObject& aEvent, ::sal_Int32 nOldState, ::sal_Int32 nNewState ) override;
+    virtual void SAL_CALL disposing( const css::lang::EventObject& aEvent ) override;
+
+    // document::XEventListener
+    virtual void SAL_CALL       notifyEvent( const document::EventObject& aEvent ) override;
+
+    // XEmbeddedClient
+    virtual void SAL_CALL saveObject() override;
+    virtual void SAL_CALL visibilityChanged( sal_Bool bVisible ) override;
+
+    // XComponentSupplier
+    virtual uno::Reference< util::XCloseable > SAL_CALL getComponent() override;
+
+    // XInplaceClient
+    virtual sal_Bool SAL_CALL canInplaceActivate() override;
+    virtual void SAL_CALL activatingInplace() override;
+    virtual void SAL_CALL activatingUI() override;
+    virtual void SAL_CALL deactivatedInplace() override;
+    virtual void SAL_CALL deactivatedUI() override;
+    virtual uno::Reference< css::frame::XLayoutManager > SAL_CALL getLayoutManager() override;
+    virtual uno::Reference< frame::XDispatchProvider > SAL_CALL getInplaceDispatchProvider() override;
+    virtual awt::Rectangle SAL_CALL getPlacement() override;
+    virtual awt::Rectangle SAL_CALL getClipRectangle() override;
+    virtual void SAL_CALL translateAccelerators( const uno::Sequence< awt::KeyEvent >& aKeys ) override;
+    virtual void SAL_CALL scrollObject( const awt::Size& aOffset ) override;
+    virtual void SAL_CALL changedPlacement( const awt::Rectangle& aPosRect ) override;
+
+    // XWindowSupplier
+    virtual uno::Reference< awt::XWindow > SAL_CALL getWindow() override;
+};
+
+}
+
+SdrLightEmbeddedClient_Impl::SdrLightEmbeddedClient_Impl( SdrOle2Obj* pObj )
+: mpObj( pObj )
+{
+}
+SdrLightEmbeddedClient_Impl::~SdrLightEmbeddedClient_Impl()
+{
+    assert(!mpObj);
+}
+tools::Rectangle SdrLightEmbeddedClient_Impl::impl_getScaledRect_nothrow() const
+{
+    tools::Rectangle aLogicRect( mpObj->GetLogicRect() );
+    // apply scaling to object area and convert to pixels
+    aLogicRect.SetSize( Size( long( aLogicRect.GetWidth() * m_aScaleWidth),
+                              long( aLogicRect.GetHeight() * m_aScaleHeight) ) );
+    return aLogicRect;
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::changingState( const css::lang::EventObject& /*aEvent*/, ::sal_Int32 /*nOldState*/, ::sal_Int32 /*nNewState*/ )
+{
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::stateChanged( const css::lang::EventObject& /*aEvent*/, ::sal_Int32 nOldState, ::sal_Int32 nNewState )
+{
+    SolarMutexGuard aGuard;
+
+    if ( mpObj && nOldState == embed::EmbedStates::LOADED && nNewState == embed::EmbedStates::RUNNING )
+    {
+        mpObj->ObjectLoaded();
+        GetSdrGlobalData().GetOLEObjCache().InsertObj(mpObj);
+    }
+    else if ( mpObj && nNewState == embed::EmbedStates::LOADED && nOldState == embed::EmbedStates::RUNNING )
+    {
+        GetSdrGlobalData().GetOLEObjCache().RemoveObj(mpObj);
+    }
+}
+
+void SdrLightEmbeddedClient_Impl::disconnect()
+{
+    SolarMutexGuard aGuard;
+    if (!mpObj)
+        return;
+    GetSdrGlobalData().GetOLEObjCache().RemoveObj(mpObj);
+    mpObj = nullptr;
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::disposing( const css::lang::EventObject& /*aEvent*/ )
+{
+    disconnect();
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::notifyEvent( const document::EventObject& aEvent )
+{
+    // TODO/LATER: when writer uses this implementation the code could be shared with SfxInPlaceClient_Impl
+
+    SolarMutexGuard aGuard;
+
+    // the code currently makes sense only in case there is no other client
+    if ( mpObj && mpObj->GetAspect() != embed::Aspects::MSOLE_ICON && aEvent.EventName == "OnVisAreaChanged"
+      && mpObj->GetObjRef().is() && mpObj->GetObjRef()->getClientSite() == uno::Reference< embed::XEmbeddedClient >( this ) )
+    {
+        try
+        {
+            MapUnit aContainerMapUnit( MapUnit::Map100thMM );
+            uno::Reference< embed::XVisualObject > xParentVis( mpObj->GetParentXModel(), uno::UNO_QUERY );
+            if ( xParentVis.is() )
+                aContainerMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xParentVis->getMapUnit( mpObj->GetAspect() ) );
+
+            MapUnit aObjMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( mpObj->GetObjRef()->getMapUnit( mpObj->GetAspect() ) );
+
+            tools::Rectangle          aVisArea;
+            awt::Size aSz;
+            try
+            {
+                aSz = mpObj->GetObjRef()->getVisualAreaSize( mpObj->GetAspect() );
+            }
+            catch( embed::NoVisualAreaSizeException& )
+            {
+                OSL_FAIL( "No visual area size!" );
+                aSz.Width = 5000;
+                aSz.Height = 5000;
+            }
+            catch( uno::Exception& )
+            {
+                OSL_FAIL( "Unexpected exception!" );
+                aSz.Width = 5000;
+                aSz.Height = 5000;
+            }
+
+            aVisArea.SetSize( Size( aSz.Width, aSz.Height ) );
+            aVisArea = OutputDevice::LogicToLogic(aVisArea, MapMode(aObjMapUnit), MapMode(aContainerMapUnit));
+            Size aScaledSize( static_cast< long >( m_aScaleWidth * Fraction( aVisArea.GetWidth() ) ),
+                                static_cast< long >( m_aScaleHeight * Fraction( aVisArea.GetHeight() ) ) );
+            tools::Rectangle aLogicRect( mpObj->GetLogicRect() );
+
+            // react to the change if the difference is bigger than one pixel
+            Size aPixelDiff =
+                Application::GetDefaultDevice()->LogicToPixel(
+                    Size( aLogicRect.GetWidth() - aScaledSize.Width(),
+                          aLogicRect.GetHeight() - aScaledSize.Height() ),
+                    MapMode(aContainerMapUnit));
+            if( aPixelDiff.Width() || aPixelDiff.Height() )
+            {
+                mpObj->SetLogicRect( tools::Rectangle( aLogicRect.TopLeft(), aScaledSize ) );
+                mpObj->BroadcastObjectChange();
+            }
+            else
+                mpObj->ActionChanged();
+        }
+        catch( uno::Exception& )
+        {
+            OSL_FAIL( "Unexpected exception!" );
+        }
+    }
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::saveObject()
+{
+    // TODO/LATER: when writer uses this implementation the code could be shared with SfxInPlaceClient_Impl
+    uno::Reference< embed::XCommonEmbedPersist > xPersist;
+    uno::Reference< util::XModifiable > xModifiable;
+
+    {
+        SolarMutexGuard aGuard;
+
+        if ( !mpObj )
+            throw embed::ObjectSaveVetoException();
+
+        // the common persistence is supported by objects and links
+        xPersist.set( mpObj->GetObjRef(), uno::UNO_QUERY_THROW );
+        xModifiable.set( mpObj->GetParentXModel(), uno::UNO_QUERY );
+    }
+
+    xPersist->storeOwn();
+
+    if ( xModifiable.is() )
+        xModifiable->setModified( true );
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::visibilityChanged( sal_Bool /*bVisible*/ )
+{
+    // nothing to do currently
+    // TODO/LATER: when writer uses this implementation the code could be shared with SfxInPlaceClient_Impl
+    if ( mpObj )
+    {
+        tools::Rectangle aLogicRect( mpObj->GetLogicRect() );
+        Size aLogicSize( aLogicRect.GetWidth(), aLogicRect.GetHeight() );
+
+        if( mpObj->IsChart() )
+        {
+            //charts never should be stretched see #i84323# for example
+            mpObj->SetLogicRect( tools::Rectangle( aLogicRect.TopLeft(), aLogicSize ) );
+            mpObj->BroadcastObjectChange();
+        } // if( mpObj->IsChart() )
+    }
+}
+
+uno::Reference< util::XCloseable > SAL_CALL SdrLightEmbeddedClient_Impl::getComponent()
+{
+    uno::Reference< util::XCloseable > xResult;
+
+    SolarMutexGuard aGuard;
+    if ( mpObj )
+        xResult.set( mpObj->GetParentXModel(), uno::UNO_QUERY );
+
+    return xResult;
+}
+// XInplaceClient
+
+sal_Bool SAL_CALL SdrLightEmbeddedClient_Impl::canInplaceActivate()
+{
+    bool bRet = false;
+    SolarMutexGuard aGuard;
+    if ( mpObj )
+    {
+        uno::Reference< embed::XEmbeddedObject > xObject = mpObj->GetObjRef();
+        if ( !xObject.is() )
+            throw uno::RuntimeException();
+        // we don't want to switch directly from outplace to inplace mode
+        bRet = !( xObject->getCurrentState() == embed::EmbedStates::ACTIVE || mpObj->GetAspect() == embed::Aspects::MSOLE_ICON );
+    } // if ( mpObj )
+    return bRet;
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::activatingInplace()
+{
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::activatingUI()
+{
+    SolarMutexGuard aGuard;
+
+    uno::Reference < beans::XPropertySet > xFrame( lcl_getFrame_throw(mpObj));
+    uno::Reference < frame::XFrame > xOwnFrame( xFrame,uno::UNO_QUERY);
+    uno::Reference < frame::XFramesSupplier > xParentFrame = xOwnFrame->getCreator();
+    if ( xParentFrame.is() )
+        xParentFrame->setActiveFrame( xOwnFrame );
+
+    OLEObjCache& rObjCache = GetSdrGlobalData().GetOLEObjCache();
+    const size_t nCount = rObjCache.size();
+    for(sal_Int32 i = nCount-1 ; i >= 0;--i)
+    {
+        SdrOle2Obj* pObj = rObjCache[i];
+        if ( pObj != mpObj )
+        {
+            // only deactivate ole objects which belongs to the same frame
+            if ( xFrame == lcl_getFrame_throw(pObj) )
+            {
+                const uno::Reference< embed::XEmbeddedObject >& xObject = pObj->GetObjRef();
+                try
+                {
+                    if ( xObject->getStatus( pObj->GetAspect() ) & embed::EmbedMisc::MS_EMBED_ACTIVATEWHENVISIBLE )
+                        xObject->changeState( embed::EmbedStates::INPLACE_ACTIVE );
+                    else
+                    {
+                        // the links should not stay in running state for long time because of locking
+                        uno::Reference< embed::XLinkageSupport > xLink( xObject, uno::UNO_QUERY );
+                        if ( xLink.is() && xLink->isLink() )
+                            xObject->changeState( embed::EmbedStates::LOADED );
+                        else
+                            xObject->changeState( embed::EmbedStates::RUNNING );
+                    }
+                }
+                catch (css::uno::Exception& )
+                {}
+            }
+        }
+    } // for(sal_Int32 i = nCount-1 ; i >= 0;--i)
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::deactivatedInplace()
+{
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::deactivatedUI()
+{
+    SolarMutexGuard aGuard;
+    css::uno::Reference< css::frame::XLayoutManager > xLayoutManager(getLayoutManager());
+    if ( xLayoutManager.is() )
+    {
+        static const char aMenuBarURL[] = "private:resource/menubar/menubar";
+        if ( !xLayoutManager->isElementVisible( aMenuBarURL ) )
+            xLayoutManager->createElement( aMenuBarURL );
+    }
+}
+
+uno::Reference< css::frame::XLayoutManager > SAL_CALL SdrLightEmbeddedClient_Impl::getLayoutManager()
+{
+    uno::Reference< css::frame::XLayoutManager > xMan;
+    SolarMutexGuard aGuard;
+    uno::Reference < beans::XPropertySet > xFrame( lcl_getFrame_throw(mpObj));
+    try
+    {
+        xMan.set(xFrame->getPropertyValue("LayoutManager"),uno::UNO_QUERY);
+    }
+    catch ( uno::Exception& ex )
+    {
+        css::uno::Any anyEx = cppu::getCaughtException();
+        throw css::lang::WrappedTargetRuntimeException( ex.Message,
+                        nullptr, anyEx );
+    }
+
+    return xMan;
+}
+
+uno::Reference< frame::XDispatchProvider > SAL_CALL SdrLightEmbeddedClient_Impl::getInplaceDispatchProvider()
+{
+    SolarMutexGuard aGuard;
+    return uno::Reference < frame::XDispatchProvider >( lcl_getFrame_throw(mpObj), uno::UNO_QUERY_THROW );
+}
+
+awt::Rectangle SAL_CALL SdrLightEmbeddedClient_Impl::getPlacement()
+{
+    SolarMutexGuard aGuard;
+    if ( !mpObj )
+        throw uno::RuntimeException();
+
+    tools::Rectangle aLogicRect = impl_getScaledRect_nothrow();
+    MapUnit aContainerMapUnit( MapUnit::Map100thMM );
+    uno::Reference< embed::XVisualObject > xParentVis( mpObj->GetParentXModel(), uno::UNO_QUERY );
+    if ( xParentVis.is() )
+        aContainerMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xParentVis->getMapUnit( mpObj->GetAspect() ) );
+
+    aLogicRect = Application::GetDefaultDevice()->LogicToPixel(aLogicRect, MapMode(aContainerMapUnit));
+    return AWTRectangle( aLogicRect );
+}
+
+awt::Rectangle SAL_CALL SdrLightEmbeddedClient_Impl::getClipRectangle()
+{
+    return getPlacement();
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::translateAccelerators( const uno::Sequence< awt::KeyEvent >& /*aKeys*/ )
+{
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::scrollObject( const awt::Size& /*aOffset*/ )
+{
+}
+
+void SAL_CALL SdrLightEmbeddedClient_Impl::changedPlacement( const awt::Rectangle& aPosRect )
+{
+    SolarMutexGuard aGuard;
+    if ( !mpObj )
+        throw uno::RuntimeException();
+
+    uno::Reference< embed::XInplaceObject > xInplace( mpObj->GetObjRef(), uno::UNO_QUERY_THROW );
+
+    // check if the change is at least one pixel in size
+    awt::Rectangle aOldRect = getPlacement();
+    tools::Rectangle aNewPixelRect = VCLRectangle( aPosRect );
+    tools::Rectangle aOldPixelRect = VCLRectangle( aOldRect );
+    if ( aOldPixelRect == aNewPixelRect )
+        // nothing has changed
+        return;
+
+    // new scaled object area
+    MapUnit aContainerMapUnit( MapUnit::Map100thMM );
+    uno::Reference< embed::XVisualObject > xParentVis( mpObj->GetParentXModel(), uno::UNO_QUERY );
+    if ( xParentVis.is() )
+        aContainerMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xParentVis->getMapUnit( mpObj->GetAspect() ) );
+
+    tools::Rectangle aNewLogicRect = Application::GetDefaultDevice()->PixelToLogic(aNewPixelRect, MapMode(aContainerMapUnit));
+    tools::Rectangle aLogicRect = impl_getScaledRect_nothrow();
+
+    if ( aNewLogicRect != aLogicRect )
+    {
+        // the calculation of the object area has not changed the object size
+        // it should be done here then
+        //SfxBooleanFlagGuard aGuard( m_bResizeNoScale, true );
+
+        // new size of the object area without scaling
+        Size aNewObjSize( long( aNewLogicRect.GetWidth() / m_aScaleWidth ),
+                          long( aNewLogicRect.GetHeight() / m_aScaleHeight ) );
+
+        // now remove scaling from new placement and keep this at the new object area
+        aNewLogicRect.SetSize( aNewObjSize );
+        // react to the change if the difference is bigger than one pixel
+        Size aPixelDiff =
+            Application::GetDefaultDevice()->LogicToPixel(
+                Size( aLogicRect.GetWidth() - aNewObjSize.Width(),
+                      aLogicRect.GetHeight() - aNewObjSize.Height() ),
+                MapMode(aContainerMapUnit));
+        if( aPixelDiff.Width() || aPixelDiff.Height() )
+        {
+            mpObj->SetLogicRect( tools::Rectangle( aLogicRect.TopLeft(), aNewObjSize ) );
+            mpObj->BroadcastObjectChange();
+        }
+        else
+            mpObj->ActionChanged();
+    }
+}
+// XWindowSupplier
+
+uno::Reference< awt::XWindow > SAL_CALL SdrLightEmbeddedClient_Impl::getWindow()
+{
+    SolarMutexGuard aGuard;
+    uno::Reference< awt::XWindow > xCurrent = m_xWindow;
+    if ( !xCurrent.is() )
+    {
+        if ( !mpObj )
+            throw uno::RuntimeException();
+        uno::Reference< frame::XFrame> xFrame(lcl_getFrame_throw(mpObj),uno::UNO_QUERY_THROW);
+        xCurrent = xFrame->getComponentWindow();
+    } // if ( !xCurrent.is() )
+    return xCurrent;
+}
+void SdrLightEmbeddedClient_Impl::setWindow(const uno::Reference< awt::XWindow >& _xWindow)
+{
+    m_xWindow = _xWindow;
+}
+
+SdrEmbedObjectLink::SdrEmbedObjectLink(SdrOle2Obj* pObject):
+    ::sfx2::SvBaseLink( ::SfxLinkUpdateMode::ONCALL, SotClipboardFormatId::SVXB ),
+    pObj(pObject)
+{
+    SetSynchron( false );
+}
+
+SdrEmbedObjectLink::~SdrEmbedObjectLink()
+{
+}
+
+::sfx2::SvBaseLink::UpdateResult SdrEmbedObjectLink::DataChanged(
+    const OUString& /*rMimeType*/, const css::uno::Any & /*rValue*/ )
+{
+    if ( !pObj->UpdateLinkURL_Impl() )
+    {
+        // the link URL was not changed
+        uno::Reference< embed::XEmbeddedObject > xObject = pObj->GetObjRef();
+        OSL_ENSURE( xObject.is(), "The object must exist always!" );
+        if ( xObject.is() )
+        {
+            // let the object reload the link
+            // TODO/LATER: reload call could be used for this case
+
+            try
+            {
+                sal_Int32 nState = xObject->getCurrentState();
+                if ( nState != embed::EmbedStates::LOADED )
+                {
+                    // in some cases the linked file probably is not locked so it could be changed
+                    xObject->changeState( embed::EmbedStates::LOADED );
+                    xObject->changeState( nState );
+                }
+            }
+            catch ( uno::Exception& )
+            {
+            }
+        }
+    }
+
+    pObj->GetNewReplacement();
+    pObj->SetChanged();
+
+    return SUCCESS;
+}
+
+void SdrEmbedObjectLink::Closed()
+{
+    pObj->BreakFileLink_Impl();
+    SvBaseLink::Closed();
+}
+
+class SdrOle2ObjImpl
+{
+public:
+    svt::EmbeddedObjectRef mxObjRef;
+
+    std::unique_ptr<Graphic> mxGraphic;
+    OUString        maProgName;
+    OUString        aPersistName;       // name of object in persist
+    rtl::Reference<SdrLightEmbeddedClient_Impl> mxLightClient; // must be registered as client only using AddOwnLightClient() call
+
+    bool mbFrame:1; // Due to compatibility at SdrTextObj for now
+    bool mbSuppressSetVisAreaSize:1; // #i118524#
+    mutable bool mbTypeAsked:1;
+    mutable bool mbIsChart:1;
+    bool mbLoadingOLEObjectFailed:1; // New local var to avoid repeated loading if load of OLE2 fails
+    bool mbConnected:1;
+
+    SdrEmbedObjectLink* mpObjectLink;
+    OUString maLinkURL;
+
+    rtl::Reference<SvxUnoShapeModifyListener> mxModifyListener;
+
+    explicit SdrOle2ObjImpl( bool bFrame ) :
+        mbFrame(bFrame),
+        mbSuppressSetVisAreaSize(false),
+        mbTypeAsked(false),
+        mbIsChart(false),
+        mbLoadingOLEObjectFailed(false),
+        mbConnected(false),
+        mpObjectLink(nullptr)
+    {
+        mxObjRef.Lock();
+    }
+
+    SdrOle2ObjImpl( bool bFrame, const svt::EmbeddedObjectRef& rObjRef ) :
+        mxObjRef(rObjRef),
+        mbFrame(bFrame),
+        mbSuppressSetVisAreaSize(false),
+        mbTypeAsked(false),
+        mbIsChart(false),
+        mbLoadingOLEObjectFailed(false),
+        mbConnected(false),
+        mpObjectLink(nullptr)
+    {
+        mxObjRef.Lock();
+    }
+
+    ~SdrOle2ObjImpl()
+    {
+        mxGraphic.reset();
+
+        if (mxModifyListener.is())
+        {
+            mxModifyListener->invalidate();
+        }
+    }
+};
+
+// Predicate determining whether the given OLE is an internal math
+// object
+static bool ImplIsMathObj( const uno::Reference < embed::XEmbeddedObject >& rObjRef )
+{
+    if ( !rObjRef.is() )
+        return false;
+
+    SvGlobalName aClassName( rObjRef->getClassID() );
+    return aClassName == SvGlobalName(SO3_SM_CLASSID_30) ||
+        aClassName == SvGlobalName(SO3_SM_CLASSID_40) ||
+        aClassName == SvGlobalName(SO3_SM_CLASSID_50) ||
+        aClassName == SvGlobalName(SO3_SM_CLASSID_60) ||
+        aClassName == SvGlobalName(SO3_SM_CLASSID);
+}
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrOle2Obj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::OleProperties>(*this);
+}
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrOle2Obj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrOle2Obj>(*this);
+}
+
+void SdrOle2Obj::Init()
+{
+    // Stuff that was done from old SetModel:
+    // #i43086# #i85304 redo the change for charts for the above bugfix, as #i43086# does not occur anymore
+    // so maybe the ImpSetVisAreaSize call can be removed here completely
+    // Nevertheless I leave it in for other objects as I am not sure about the side effects when removing now
+    if(!getSdrModelFromSdrObject().isLocked() && !IsChart())
+    {
+        ImpSetVisAreaSize();
+    }
+
+    ::comphelper::IEmbeddedHelper* pDestPers(getSdrModelFromSdrObject().GetPersist());
+    if(pDestPers && !IsEmptyPresObj())
+    {
+        // object wasn't connected, now it should be
+        Connect_Impl();
+    }
+
+    AddListeners_Impl();
+}
+
+SdrOle2Obj::SdrOle2Obj(
+    SdrModel& rSdrModel,
+    bool bFrame_)
+:   SdrRectObj(rSdrModel),
+    mpImpl(new SdrOle2ObjImpl(bFrame_))
+{
+    Init();
+}
+
+SdrOle2Obj::SdrOle2Obj(
+    SdrModel& rSdrModel,
+    const svt::EmbeddedObjectRef& rNewObjRef,
+    const OUString& rNewObjName,
+    const tools::Rectangle& rNewRect)
+:   SdrRectObj(rSdrModel, rNewRect),
+    mpImpl(new SdrOle2ObjImpl(false/*bFrame_*/, rNewObjRef))
+{
+    mpImpl->aPersistName = rNewObjName;
+
+    if (mpImpl->mxObjRef.is() && (mpImpl->mxObjRef->getStatus( GetAspect() ) & embed::EmbedMisc::EMBED_NEVERRESIZE ) )
+        SetResizeProtect(true);
+
+    // For math objects, set closed state to transparent
+    SetClosedObj(!ImplIsMathObj( mpImpl->mxObjRef.GetObject() ));
+
+    Init();
+}
+
+OUString SdrOle2Obj::GetStyleString()
+{
+    OUString strStyle;
+    if (mpImpl->mxObjRef.is() && mpImpl->mxObjRef.IsChart())
+    {
+        strStyle = mpImpl->mxObjRef.GetChartType();
+    }
+    return strStyle;
+}
+
+SdrOle2Obj::~SdrOle2Obj()
+{
+    if ( mpImpl->mbConnected )
+        Disconnect();
+
+    DisconnectFileLink_Impl();
+
+    if (mpImpl->mxLightClient)
+    {
+        mpImpl->mxLightClient->disconnect();
+        mpImpl->mxLightClient.clear();
+    }
+}
+
+void SdrOle2Obj::SetAspect( sal_Int64 nAspect )
+{
+    mpImpl->mxObjRef.SetViewAspect( nAspect );
+}
+
+const svt::EmbeddedObjectRef& SdrOle2Obj::getEmbeddedObjectRef() const
+{
+    return mpImpl->mxObjRef;
+}
+
+sal_Int64 SdrOle2Obj::GetAspect() const
+{
+    return mpImpl->mxObjRef.GetViewAspect();
+}
+
+bool SdrOle2Obj::isInplaceActive() const
+{
+    return mpImpl->mxObjRef.is() && embed::EmbedStates::INPLACE_ACTIVE == mpImpl->mxObjRef->getCurrentState();
+}
+
+bool SdrOle2Obj::isUiActive() const
+{
+    return mpImpl->mxObjRef.is() && embed::EmbedStates::UI_ACTIVE == mpImpl->mxObjRef->getCurrentState();
+}
+
+void SdrOle2Obj::SetGraphic(const Graphic& rGrf)
+{
+    // only for setting a preview graphic
+    mpImpl->mxGraphic.reset(new Graphic(rGrf));
+
+    SetChanged();
+    BroadcastObjectChange();
+}
+
+void SdrOle2Obj::ClearGraphic()
+{
+    mpImpl->mxGraphic.reset();
+
+    SetChanged();
+    BroadcastObjectChange();
+}
+
+void SdrOle2Obj::SetProgName( const OUString& rName )
+{
+    mpImpl->maProgName = rName;
+}
+
+const OUString& SdrOle2Obj::GetProgName() const
+{
+    return mpImpl->maProgName;
+}
+
+bool SdrOle2Obj::IsEmpty() const
+{
+    return !mpImpl->mxObjRef.is();
+}
+
+void SdrOle2Obj::Connect()
+{
+    if( IsEmptyPresObj() )
+        return;
+
+    if( mpImpl->mbConnected )
+    {
+        // currently there are situations where it seems to be unavoidable to have multiple connects
+        // changing this would need a larger code rewrite, so for now I remove the assertion
+        // OSL_FAIL("Connect() called on connected object!");
+        return;
+    }
+
+    Connect_Impl();
+    AddListeners_Impl();
+}
+
+bool SdrOle2Obj::UpdateLinkURL_Impl()
+{
+    bool bResult = false;
+
+    if ( mpImpl->mpObjectLink )
+    {
+        sfx2::LinkManager* pLinkManager(getSdrModelFromSdrObject().GetLinkManager());
+
+        if ( pLinkManager )
+        {
+            OUString aNewLinkURL;
+            sfx2::LinkManager::GetDisplayNames( mpImpl->mpObjectLink, nullptr, &aNewLinkURL );
+            if ( !aNewLinkURL.equalsIgnoreAsciiCase( mpImpl->maLinkURL ) )
+            {
+                GetObjRef_Impl();
+                uno::Reference<embed::XCommonEmbedPersist> xPersObj( mpImpl->mxObjRef.GetObject(), uno::UNO_QUERY );
+                OSL_ENSURE( xPersObj.is(), "The object must exist!" );
+                if ( xPersObj.is() )
+                {
+                    try
+                    {
+                        sal_Int32 nCurState = mpImpl->mxObjRef->getCurrentState();
+                        if ( nCurState != embed::EmbedStates::LOADED )
+                            mpImpl->mxObjRef->changeState(embed::EmbedStates::LOADED);
+
+                        // TODO/LATER: there should be possible to get current mediadescriptor settings from the object
+                        uno::Sequence< beans::PropertyValue > aArgs( 1 );
+                        aArgs[0].Name = "URL";
+                        aArgs[0].Value <<= aNewLinkURL;
+                        xPersObj->reload( aArgs, uno::Sequence< beans::PropertyValue >() );
+
+                        mpImpl->maLinkURL = aNewLinkURL;
+                        bResult = true;
+
+                        if ( nCurState != embed::EmbedStates::LOADED )
+                            mpImpl->mxObjRef->changeState(nCurState);
+                    }
+                    catch( css::uno::Exception const & )
+                    {
+                        TOOLS_WARN_EXCEPTION( "svx", "SdrOle2Obj::UpdateLinkURL_Impl()" );
+                    }
+                }
+
+                if ( !bResult )
+                {
+                    // TODO/LATER: return the old name to the link manager, is it possible?
+                }
+            }
+        }
+    }
+
+    return bResult;
+}
+
+void SdrOle2Obj::BreakFileLink_Impl()
+{
+    uno::Reference<document::XStorageBasedDocument> xDoc(getSdrModelFromSdrObject().getUnoModel(), uno::UNO_QUERY);
+
+    if ( xDoc.is() )
+    {
+        uno::Reference< embed::XStorage > xStorage = xDoc->getDocumentStorage();
+        if ( xStorage.is() )
+        {
+            try
+            {
+                uno::Reference< embed::XLinkageSupport > xLinkSupport( mpImpl->mxObjRef.GetObject(), uno::UNO_QUERY_THROW );
+                xLinkSupport->breakLink( xStorage, mpImpl->aPersistName );
+                DisconnectFileLink_Impl();
+                mpImpl->maLinkURL.clear();
+            }
+            catch( css::uno::Exception& )
+            {
+                TOOLS_WARN_EXCEPTION( "svx", "SdrOle2Obj::BreakFileLink_Impl()" );
+            }
+        }
+    }
+}
+
+void SdrOle2Obj::DisconnectFileLink_Impl()
+{
+    sfx2::LinkManager* pLinkManager(getSdrModelFromSdrObject().GetLinkManager());
+
+    if ( pLinkManager && mpImpl->mpObjectLink )
+    {
+        pLinkManager->Remove( mpImpl->mpObjectLink );
+        mpImpl->mpObjectLink = nullptr;
+    }
+}
+
+void SdrOle2Obj::CheckFileLink_Impl()
+{
+    if (mpImpl->mxObjRef.GetObject().is() && !mpImpl->mpObjectLink)
+    {
+        try
+        {
+            uno::Reference< embed::XLinkageSupport > xLinkSupport( mpImpl->mxObjRef.GetObject(), uno::UNO_QUERY );
+
+            if ( xLinkSupport.is() && xLinkSupport->isLink() )
+            {
+                OUString aLinkURL = xLinkSupport->getLinkURL();
+
+                if ( !aLinkURL.isEmpty() )
+                {
+                    // this is a file link so the model link manager should handle it
+                    sfx2::LinkManager* pLinkManager(getSdrModelFromSdrObject().GetLinkManager());
+
+                    if ( pLinkManager )
+                    {
+                        mpImpl->mpObjectLink = new SdrEmbedObjectLink( this );
+                        mpImpl->maLinkURL = aLinkURL;
+                        pLinkManager->InsertFileLink( *mpImpl->mpObjectLink, sfx2::SvBaseLinkObjectType::ClientOle, aLinkURL );
+                        mpImpl->mpObjectLink->Connect();
+                    }
+                }
+            }
+        }
+        catch (const css::uno::Exception&)
+        {
+            TOOLS_WARN_EXCEPTION("svx", "SdrOle2Obj::CheckFileLink_Impl()");
+        }
+    }
+}
+
+void SdrOle2Obj::Connect_Impl()
+{
+    if(!mpImpl->aPersistName.isEmpty() )
+    {
+        try
+        {
+            ::comphelper::IEmbeddedHelper* pPers(getSdrModelFromSdrObject().GetPersist());
+
+            if ( pPers )
+            {
+                comphelper::EmbeddedObjectContainer& rContainer = pPers->getEmbeddedObjectContainer();
+
+                if ( !rContainer.HasEmbeddedObject( mpImpl->aPersistName )
+                  || ( mpImpl->mxObjRef.is() && !rContainer.HasEmbeddedObject( mpImpl->mxObjRef.GetObject() ) ) )
+                {
+                    // object not known to container document
+                    // No object -> disaster!
+                    DBG_ASSERT( mpImpl->mxObjRef.is(), "No object in connect!");
+                    if ( mpImpl->mxObjRef.is() )
+                    {
+                        // object came from the outside, now add it to the container
+                        OUString aTmp;
+                        rContainer.InsertEmbeddedObject( mpImpl->mxObjRef.GetObject(), aTmp );
+                        mpImpl->aPersistName = aTmp;
+                    }
+                }
+                else if ( !mpImpl->mxObjRef.is() )
+                {
+                    mpImpl->mxObjRef.Assign( rContainer.GetEmbeddedObject( mpImpl->aPersistName ), mpImpl->mxObjRef.GetViewAspect() );
+                    mpImpl->mbTypeAsked = false;
+                }
+
+                if ( mpImpl->mxObjRef.GetObject().is() )
+                {
+                    mpImpl->mxObjRef.AssignToContainer( &rContainer, mpImpl->aPersistName );
+                    mpImpl->mbConnected = true;
+                    mpImpl->mxObjRef.Lock();
+                }
+            }
+
+            if ( mpImpl->mxObjRef.is() )
+            {
+                if ( !mpImpl->mxLightClient.is() )
+                    mpImpl->mxLightClient = new SdrLightEmbeddedClient_Impl( this );
+
+                mpImpl->mxObjRef->addStateChangeListener( mpImpl->mxLightClient.get() );
+                mpImpl->mxObjRef->addEventListener( uno::Reference< document::XEventListener >( mpImpl->mxLightClient.get() ) );
+
+                if ( mpImpl->mxObjRef->getCurrentState() != embed::EmbedStates::LOADED )
+                    GetSdrGlobalData().GetOLEObjCache().InsertObj(this);
+
+                CheckFileLink_Impl();
+
+                uno::Reference< container::XChild > xChild( mpImpl->mxObjRef.GetObject(), uno::UNO_QUERY );
+                if( xChild.is() )
+                {
+                    uno::Reference< uno::XInterface > xParent( getSdrModelFromSdrObject().getUnoModel());
+                    if( xParent.is())
+                        xChild->setParent( getSdrModelFromSdrObject().getUnoModel() );
+                }
+
+            }
+        }
+        catch( css::uno::Exception& )
+        {
+            TOOLS_WARN_EXCEPTION( "svx", "SdrOle2Obj::Connect_Impl()" );
+        }
+    }
+}
+
+void SdrOle2Obj::ObjectLoaded()
+{
+    AddListeners_Impl();
+}
+
+void SdrOle2Obj::AddListeners_Impl()
+{
+    if( mpImpl->mxObjRef.is() && mpImpl->mxObjRef->getCurrentState() != embed::EmbedStates::LOADED )
+    {
+        // register modify listener
+        if (!mpImpl->mxModifyListener.is())
+        {
+            mpImpl->mxModifyListener = new SvxUnoShapeModifyListener(this);
+        }
+
+        uno::Reference< util::XModifyBroadcaster > xBC( getXModel(), uno::UNO_QUERY );
+        if (xBC.is())
+        {
+            uno::Reference<util::XModifyListener> xListener(mpImpl->mxModifyListener.get());
+            xBC->addModifyListener( xListener );
+        }
+    }
+}
+
+void SdrOle2Obj::Disconnect()
+{
+    if( IsEmptyPresObj() )
+        return;
+
+    if( !mpImpl->mbConnected )
+    {
+        OSL_FAIL("Disconnect() called on disconnected object!");
+        return;
+    }
+
+    RemoveListeners_Impl();
+    Disconnect_Impl();
+}
+
+void SdrOle2Obj::RemoveListeners_Impl()
+{
+    if ( mpImpl->mxObjRef.is() && !mpImpl->aPersistName.isEmpty() )
+    {
+        try
+        {
+            sal_Int32 nState = mpImpl->mxObjRef->getCurrentState();
+            if ( nState != embed::EmbedStates::LOADED )
+            {
+                uno::Reference< util::XModifyBroadcaster > xBC( getXModel(), uno::UNO_QUERY );
+                if (xBC.is() && mpImpl->mxModifyListener.is())
+                {
+                    uno::Reference<util::XModifyListener> xListener(mpImpl->mxModifyListener.get());
+                    xBC->removeModifyListener( xListener );
+                }
+            }
+        }
+        catch( css::uno::Exception& )
+        {
+            TOOLS_WARN_EXCEPTION( "svx",  "SdrOle2Obj::RemoveListeners_Impl()" );
+        }
+    }
+}
+
+void SdrOle2Obj::Disconnect_Impl()
+{
+    try
+    {
+        if ( !mpImpl->aPersistName.isEmpty() )
+        {
+            if( getSdrModelFromSdrObject().IsInDestruction() )
+            {
+                // TODO/LATER: here we must assume that the destruction of the model is enough to make clear that we will not
+                // remove the object from the container, even if the DrawingObject itself is not destroyed (unfortunately this
+                // There is no real need to do the following removing of the object from the container
+                // in case the model has correct persistence, but in case of problems such a removing
+                // would make the behavior of the office more stable
+
+                comphelper::EmbeddedObjectContainer* pContainer = mpImpl->mxObjRef.GetContainer();
+                if ( pContainer )
+                {
+                    pContainer->CloseEmbeddedObject( mpImpl->mxObjRef.GetObject() );
+                    mpImpl->mxObjRef.AssignToContainer( nullptr, mpImpl->aPersistName );
+                }
+
+                // happens later than the destruction of the model, so we can't assert that).
+                //DBG_ASSERT( bInDestruction, "Model is destroyed, but not me?!" );
+                //TODO/LATER: should be make sure that the ObjectShell also forgets the object, because we will close it soon?
+                /*
+                uno::Reference < util::XCloseable > xClose( xObjRef, uno::UNO_QUERY );
+                if ( xClose.is() )
+                {
+                    try
+                    {
+                        xClose->close( true );
+                    }
+                    catch ( util::CloseVetoException& )
+                    {
+                        // there's still someone who needs the object!
+                    }
+                }
+
+                xObjRef = NULL;*/
+            }
+            else if ( mpImpl->mxObjRef.is() )
+            {
+                if ( getSdrModelFromSdrObject().getUnoModel().is() )
+                {
+                    // remove object, but don't close it (that's up to someone else)
+                    comphelper::EmbeddedObjectContainer* pContainer = mpImpl->mxObjRef.GetContainer();
+                    if ( pContainer )
+                    {
+                        pContainer->RemoveEmbeddedObject( mpImpl->mxObjRef.GetObject() );
+
+                        // TODO/LATER: mpImpl->aPersistName contains outdated information, to keep it updated
+                        // it should be returned from RemoveEmbeddedObject call. Currently it is no problem,
+                        // since no container is adjusted, actually the empty string could be provided as a name here
+                        mpImpl->mxObjRef.AssignToContainer( nullptr, mpImpl->aPersistName );
+                    }
+
+                    DisconnectFileLink_Impl();
+                }
+            }
+        }
+
+        if ( mpImpl->mxObjRef.is() && mpImpl->mxLightClient.is() )
+        {
+            mpImpl->mxObjRef->removeStateChangeListener ( mpImpl->mxLightClient.get() );
+            mpImpl->mxObjRef->removeEventListener( uno::Reference< document::XEventListener >( mpImpl->mxLightClient.get() ) );
+            mpImpl->mxObjRef->setClientSite( nullptr );
+
+            GetSdrGlobalData().GetOLEObjCache().RemoveObj(this);
+        }
+    }
+    catch( css::uno::Exception& )
+    {
+        TOOLS_WARN_EXCEPTION( "svx", "SdrOle2Obj::Disconnect_Impl()" );
+    }
+
+    mpImpl->mbConnected = false;
+}
+
+SdrObjectUniquePtr SdrOle2Obj::createSdrGrafObjReplacement(bool bAddText) const
+{
+    const Graphic* pOLEGraphic = GetGraphic();
+
+    if(pOLEGraphic)
+    {
+        // #i118485# allow creating a SdrGrafObj representation
+        SdrGrafObj* pClone = new SdrGrafObj(
+            getSdrModelFromSdrObject(),
+            *pOLEGraphic);
+
+        // copy transformation
+        basegfx::B2DHomMatrix aMatrix;
+        basegfx::B2DPolyPolygon aPolyPolygon;
+
+        TRGetBaseGeometry(aMatrix, aPolyPolygon);
+        pClone->TRSetBaseGeometry(aMatrix, aPolyPolygon);
+
+        // copy all attributes to support graphic styles for OLEs
+        pClone->SetStyleSheet(GetStyleSheet(), false);
+        pClone->SetMergedItemSet(GetMergedItemSet());
+
+        if(bAddText)
+        {
+            // #i118485# copy text (Caution! Model needed, as guaranteed in aw080)
+            OutlinerParaObject* pOPO = GetOutlinerParaObject();
+
+            if(pOPO)
+            {
+                pClone->NbcSetOutlinerParaObject(std::make_unique<OutlinerParaObject>(*pOPO));
+            }
+        }
+
+        return SdrObjectUniquePtr(pClone);
+    }
+    else
+    {
+        // #i100710# pOLEGraphic may be zero (no visualisation available),
+        // so we need to use the OLE replacement graphic
+        SdrRectObj* pClone = new SdrRectObj(
+            getSdrModelFromSdrObject(),
+            GetSnapRect());
+
+        // gray outline
+        pClone->SetMergedItem(XLineStyleItem(css::drawing::LineStyle_SOLID));
+        const svtools::ColorConfig aColorConfig;
+        const svtools::ColorConfigValue aColor(aColorConfig.GetColorValue(svtools::OBJECTBOUNDARIES));
+        pClone->SetMergedItem(XLineColorItem(OUString(), aColor.nColor));
+
+        // bitmap fill
+        pClone->SetMergedItem(XFillStyleItem(drawing::FillStyle_BITMAP));
+        pClone->SetMergedItem(XFillBitmapItem(OUString(), GetEmptyOLEReplacementGraphic()));
+        pClone->SetMergedItem(XFillBmpTileItem(false));
+        pClone->SetMergedItem(XFillBmpStretchItem(false));
+
+        return SdrObjectUniquePtr(pClone);
+    }
+}
+
+SdrObjectUniquePtr SdrOle2Obj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    // #i118485# missing converter added
+    SdrObjectUniquePtr pRetval = createSdrGrafObjReplacement(true);
+
+    if(pRetval)
+    {
+        return pRetval->DoConvertToPolyObj(bBezier, bAddText);
+    }
+
+    return nullptr;
+}
+
+void SdrOle2Obj::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage)
+{
+    const bool bRemove(pNewPage == nullptr && pOldPage != nullptr);
+    const bool bInsert(pNewPage != nullptr && pOldPage == nullptr);
+
+    if (bRemove && mpImpl->mbConnected )
+    {
+        Disconnect();
+    }
+
+    // call parent
+    SdrRectObj::handlePageChange(pOldPage, pNewPage);
+
+    if (bInsert && !mpImpl->mbConnected )
+    {
+        Connect();
+    }
+}
+
+void SdrOle2Obj::SetObjRef( const css::uno::Reference < css::embed::XEmbeddedObject >& rNewObjRef )
+{
+    DBG_ASSERT( !rNewObjRef.is() || !mpImpl->mxObjRef.GetObject().is(), "SetObjRef called on already initialized object!");
+    if( rNewObjRef == mpImpl->mxObjRef.GetObject() )
+        return;
+
+    // the caller of the method is responsible to control the old object, it will not be closed here
+    // Otherwise WW8 import crashes because it transfers control to OLENode by this method
+    if ( mpImpl->mxObjRef.GetObject().is() )
+        mpImpl->mxObjRef.Lock( false );
+
+    // avoid removal of object in Disconnect! It is definitely a HACK to call SetObjRef(0)!
+    // This call will try to close the objects; so if anybody else wants to keep it, it must be locked by a CloseListener
+    mpImpl->mxObjRef.Clear();
+
+    if ( mpImpl->mbConnected )
+        Disconnect();
+
+    mpImpl->mxObjRef.Assign( rNewObjRef, GetAspect() );
+    mpImpl->mbTypeAsked = false;
+
+    if ( mpImpl->mxObjRef.is() )
+    {
+        mpImpl->mxGraphic.reset();
+
+        if ( mpImpl->mxObjRef->getStatus( GetAspect() ) & embed::EmbedMisc::EMBED_NEVERRESIZE )
+            SetResizeProtect(true);
+
+        // For math objects, set closed state to transparent
+        SetClosedObj(!ImplIsMathObj( rNewObjRef ));
+
+        Connect();
+    }
+
+    SetChanged();
+    BroadcastObjectChange();
+}
+
+void SdrOle2Obj::SetClosedObj( bool bIsClosed )
+{
+    // TODO/LATER: do we still need this hack?
+    // Allow changes to the closed state of OLE objects
+    bClosedObj = bIsClosed;
+}
+
+SdrObjectUniquePtr SdrOle2Obj::getFullDragClone() const
+{
+    // #i118485# use central replacement generator
+    return createSdrGrafObjReplacement(false);
+}
+
+void SdrOle2Obj::SetPersistName( const OUString& rPersistName )
+{
+    DBG_ASSERT( mpImpl->aPersistName.isEmpty(), "Persist name changed!");
+
+    mpImpl->aPersistName = rPersistName;
+    mpImpl->mbLoadingOLEObjectFailed = false;
+
+    Connect();
+    SetChanged();
+}
+
+void SdrOle2Obj::AbandonObject()
+{
+    mpImpl->aPersistName.clear();
+    mpImpl->mbLoadingOLEObjectFailed = false;
+    SetObjRef(nullptr);
+}
+
+const OUString& SdrOle2Obj::GetPersistName() const
+{
+    return mpImpl->aPersistName;
+}
+
+void SdrOle2Obj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    // #i118485# Allowing much more attributes for OLEs
+    rInfo.bRotateFreeAllowed = true;
+    rInfo.bRotate90Allowed = true;
+    rInfo.bMirrorFreeAllowed = true;
+    rInfo.bMirror45Allowed = true;
+    rInfo.bMirror90Allowed = true;
+    rInfo.bTransparenceAllowed = true;
+    rInfo.bShearAllowed = true;
+    rInfo.bEdgeRadiusAllowed = false;
+    rInfo.bNoOrthoDesired = false;
+    rInfo.bCanConvToPath = true;
+    rInfo.bCanConvToPoly = true;
+    rInfo.bCanConvToPathLineToArea = false;
+    rInfo.bCanConvToPolyLineToArea = false;
+    rInfo.bCanConvToContour = true;
+}
+
+sal_uInt16 SdrOle2Obj::GetObjIdentifier() const
+{
+    return mpImpl->mbFrame ? sal_uInt16(OBJ_FRAME) : sal_uInt16(OBJ_OLE2);
+}
+
+OUString SdrOle2Obj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(mpImpl->mbFrame ? STR_ObjNameSingulFrame : STR_ObjNameSingulOLE2));
+
+    const OUString aName(GetName());
+
+    if (!aName.isEmpty())
+    {
+        sName.append(" '");
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrOle2Obj::TakeObjNamePlural() const
+{
+    return SvxResId(mpImpl->mbFrame ? STR_ObjNamePluralFrame : STR_ObjNamePluralOLE2);
+}
+
+SdrOle2Obj* SdrOle2Obj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrOle2Obj >(rTargetModel);
+}
+
+SdrOle2Obj& SdrOle2Obj::operator=(const SdrOle2Obj& rObj)
+{
+    return assignFrom(rObj);
+}
+
+SdrOle2Obj& SdrOle2Obj::assignFrom(const SdrOle2Obj& rObj)
+{
+    //TODO/LATER: who takes over control of my old object?!
+    if( &rObj == this )
+    {
+        return *this;
+    }
+
+    // ImpAssign( rObj );
+    const SdrOle2Obj& rOle2Obj = rObj;
+
+    if( mpImpl->mbConnected )
+        Disconnect();
+
+    SdrRectObj::operator=( rObj );
+
+    // Manually copying bClosedObj attribute
+    SetClosedObj( rObj.IsClosedObj() );
+
+    mpImpl->aPersistName = rOle2Obj.mpImpl->aPersistName;
+    mpImpl->maProgName = rOle2Obj.mpImpl->maProgName;
+    mpImpl->mbFrame = rOle2Obj.mpImpl->mbFrame;
+
+    if (rOle2Obj.mpImpl->mxGraphic)
+    {
+        mpImpl->mxGraphic.reset(new Graphic(*rOle2Obj.mpImpl->mxGraphic));
+    }
+
+    if( !IsEmptyPresObj() )
+    {
+        ::comphelper::IEmbeddedHelper* pDestPers(getSdrModelFromSdrObject().GetPersist());
+        ::comphelper::IEmbeddedHelper* pSrcPers(rObj.getSdrModelFromSdrObject().GetPersist());
+        if( pDestPers && pSrcPers )
+        {
+            DBG_ASSERT( !mpImpl->mxObjRef.is(), "Object already existing!" );
+            comphelper::EmbeddedObjectContainer& rContainer = pSrcPers->getEmbeddedObjectContainer();
+            uno::Reference < embed::XEmbeddedObject > xObj = rContainer.GetEmbeddedObject( mpImpl->aPersistName );
+            if ( xObj.is() )
+            {
+                OUString aTmp;
+                mpImpl->mxObjRef.Assign( pDestPers->getEmbeddedObjectContainer().CopyAndGetEmbeddedObject(
+                    rContainer, xObj, aTmp, pSrcPers->getDocumentBaseURL(), pDestPers->getDocumentBaseURL()), rOle2Obj.GetAspect());
+                mpImpl->mbTypeAsked = false;
+                mpImpl->aPersistName = aTmp;
+                CheckFileLink_Impl();
+            }
+
+            Connect();
+        }
+    }
+
+    return *this;
+}
+
+void SdrOle2Obj::ImpSetVisAreaSize()
+{
+    // #i118524# do not again set VisAreaSize when the call comes from OLE client (e.g. ObjectAreaChanged)
+    if (mpImpl->mbSuppressSetVisAreaSize)
+        return;
+
+    // currently there is no need to recalculate scaling for iconified objects
+    // TODO/LATER: it might be needed in future when it is possible to change the icon
+    if ( GetAspect() == embed::Aspects::MSOLE_ICON )
+        return;
+
+    // the object area of an embedded object was changed, e.g. by user interaction an a selected object
+    GetObjRef();
+    if (mpImpl->mxObjRef.is())
+    {
+        sal_Int64 nMiscStatus = mpImpl->mxObjRef->getStatus( GetAspect() );
+
+        // the client is required to get access to scaling
+        SfxInPlaceClient* pClient(
+            SfxInPlaceClient::GetClient(
+                dynamic_cast<SfxObjectShell*>(
+                    getSdrModelFromSdrObject().GetPersist()),
+                    mpImpl->mxObjRef.GetObject()));
+        const bool bHasOwnClient(
+            mpImpl->mxLightClient.is() &&
+            mpImpl->mxObjRef->getClientSite() == uno::Reference< embed::XEmbeddedClient >( mpImpl->mxLightClient.get() ) );
+
+        if ( pClient || bHasOwnClient )
+        {
+            // TODO: IMHO we need to do similar things when object is UIActive or OutplaceActive?!
+            if ( ((nMiscStatus & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE) &&
+                    svt::EmbeddedObjectRef::TryRunningState( mpImpl->mxObjRef.GetObject() ))
+                    || mpImpl->mxObjRef->getCurrentState() == embed::EmbedStates::INPLACE_ACTIVE
+                    )
+            {
+                Fraction aScaleWidth;
+                Fraction aScaleHeight;
+                if ( pClient )
+                {
+                    aScaleWidth = pClient->GetScaleWidth();
+                    aScaleHeight = pClient->GetScaleHeight();
+                }
+                else
+                {
+                    aScaleWidth = mpImpl->mxLightClient->GetScaleWidth();
+                    aScaleHeight = mpImpl->mxLightClient->GetScaleHeight();
+                }
+
+                // The object wants to resize itself (f.e. Chart wants to recalculate the layout)
+                // or object is inplace active and so has a window that must be resized also
+                // In these cases the change in the object area size will be reflected in a change of the
+                // objects' visual area. The scaling will not change, but it might exist already and must
+                // be used in calculations
+                MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( mpImpl->mxObjRef->getMapUnit( GetAspect() ) );
+                Size aVisSize( static_cast<long>( Fraction( maRect.GetWidth() ) / aScaleWidth ),
+                                static_cast<long>( Fraction( maRect.GetHeight() ) / aScaleHeight ) );
+
+                aVisSize = OutputDevice::LogicToLogic(
+                    aVisSize,
+                    MapMode(getSdrModelFromSdrObject().GetScaleUnit()),
+                    MapMode(aMapUnit));
+                awt::Size aSz;
+                aSz.Width = aVisSize.Width();
+                aSz.Height = aVisSize.Height();
+                mpImpl->mxObjRef->setVisualAreaSize( GetAspect(), aSz );
+
+                try
+                {
+                    aSz = mpImpl->mxObjRef->getVisualAreaSize( GetAspect() );
+                }
+                catch( embed::NoVisualAreaSizeException& )
+                {}
+
+                tools::Rectangle aAcceptedVisArea;
+                aAcceptedVisArea.SetSize( Size( static_cast<long>( Fraction( long( aSz.Width ) ) * aScaleWidth ),
+                                                static_cast<long>( Fraction( long( aSz.Height ) ) * aScaleHeight ) ) );
+                if (aVisSize != aAcceptedVisArea.GetSize())
+                {
+                    // server changed VisArea to its liking and the VisArea is different than the suggested one
+                    // store the new value as given by the object
+                    MapUnit aNewMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( mpImpl->mxObjRef->getMapUnit( GetAspect() ) );
+                    maRect.SetSize(
+                        OutputDevice::LogicToLogic(
+                            aAcceptedVisArea.GetSize(),
+                            MapMode(aNewMapUnit),
+                            MapMode(getSdrModelFromSdrObject().GetScaleUnit())));
+                }
+
+                // make the new object area known to the client
+                // compared to the "else" branch aRect might have been changed by the object and no additional scaling was applied
+                // WHY this -> OSL_ASSERT( pClient );
+                if( pClient )
+                    pClient->SetObjArea(maRect);
+
+                // we need a new replacement image as the object has resized itself
+
+                //#i79578# don't request a new replacement image for charts to often
+                //a chart sends a modified call to the framework if it was changed
+                //thus the replacement update is already handled there
+                if( !IsChart() )
+                    mpImpl->mxObjRef.UpdateReplacement();
+            }
+            else
+            {
+                // The object isn't active and does not want to resize itself so the changed object area size
+                // will be reflected in a changed object scaling
+                Fraction aScaleWidth;
+                Fraction aScaleHeight;
+                Size aObjAreaSize;
+                if ( CalculateNewScaling( aScaleWidth, aScaleHeight, aObjAreaSize ) )
+                {
+                    if ( pClient )
+                    {
+                        tools::Rectangle aScaleRect(maRect.TopLeft(), aObjAreaSize);
+                        pClient->SetObjAreaAndScale( aScaleRect, aScaleWidth, aScaleHeight);
+                    }
+                    else
+                    {
+                        mpImpl->mxLightClient->SetSizeScale( aScaleWidth, aScaleHeight );
+                    }
+                }
+            }
+        }
+        else if( (nMiscStatus & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE) &&
+            svt::EmbeddedObjectRef::TryRunningState( mpImpl->mxObjRef.GetObject() ) )
+        {
+            //also handle not sfx based ole objects e.g. charts
+            //#i83860# resizing charts in impress distorts fonts
+            uno::Reference< embed::XVisualObject > xVisualObject( getXModel(), uno::UNO_QUERY );
+            if( xVisualObject.is() )
+            {
+                const MapUnit aMapUnit(
+                    VCLUnoHelper::UnoEmbed2VCLMapUnit(
+                        mpImpl->mxObjRef->getMapUnit(GetAspect())));
+                const Point aTL( maRect.TopLeft() );
+                const Point aBR( maRect.BottomRight() );
+                const Point aTL2(
+                    OutputDevice::LogicToLogic(
+                        aTL,
+                        MapMode(getSdrModelFromSdrObject().GetScaleUnit()),
+                        MapMode(aMapUnit)));
+                const Point aBR2(
+                    OutputDevice::LogicToLogic(
+                        aBR,
+                        MapMode(getSdrModelFromSdrObject().GetScaleUnit()),
+                        MapMode(aMapUnit)));
+                const tools::Rectangle aNewRect(
+                    aTL2,
+                    aBR2);
+
+                xVisualObject->setVisualAreaSize(
+                    GetAspect(),
+                    awt::Size(
+                        aNewRect.GetWidth(),
+                        aNewRect.GetHeight()));
+            }
+        }
+    }
+}
+
+void SdrOle2Obj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    if(!getSdrModelFromSdrObject().isLocked())
+    {
+        GetObjRef();
+
+        if ( mpImpl->mxObjRef.is() && ( mpImpl->mxObjRef->getStatus( GetAspect() ) & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE ) )
+        {
+            // if the object needs recompose on resize
+            // the client site should be created before the resize will take place
+            // check whether there is no client site and create it if necessary
+            AddOwnLightClient();
+        }
+    }
+
+    SdrRectObj::NbcResize(rRef,xFact,yFact);
+
+    if( !getSdrModelFromSdrObject().isLocked() )
+        ImpSetVisAreaSize();
+}
+
+void SdrOle2Obj::SetGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrRectObj::SetGeoData(rGeo);
+
+    if( !getSdrModelFromSdrObject().isLocked() )
+        ImpSetVisAreaSize();
+}
+
+void SdrOle2Obj::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    SdrRectObj::NbcSetSnapRect(rRect);
+
+    if( !getSdrModelFromSdrObject().isLocked() )
+        ImpSetVisAreaSize();
+
+    if ( mpImpl->mxObjRef.is() && IsChart() )
+    {
+        //#i103460# charts do not necessarily have an own size within ODF files,
+        //for this case they need to use the size settings from the surrounding frame,
+        //which is made available with this method as there is no other way
+        mpImpl->mxObjRef.SetDefaultSizeForChart( Size( rRect.GetWidth(), rRect.GetHeight() ) );
+    }
+}
+
+void SdrOle2Obj::NbcSetLogicRect(const tools::Rectangle& rRect)
+{
+    SdrRectObj::NbcSetLogicRect(rRect);
+
+    if( !getSdrModelFromSdrObject().isLocked() )
+        ImpSetVisAreaSize();
+}
+
+const Graphic* SdrOle2Obj::GetGraphic() const
+{
+    if ( mpImpl->mxObjRef.is() )
+        return mpImpl->mxObjRef.GetGraphic();
+    return mpImpl->mxGraphic.get();
+}
+
+void SdrOle2Obj::GetNewReplacement()
+{
+    if ( mpImpl->mxObjRef.is() )
+        mpImpl->mxObjRef.UpdateReplacement();
+}
+
+Size SdrOle2Obj::GetOrigObjSize( MapMode const * pTargetMapMode ) const
+{
+    return mpImpl->mxObjRef.GetSize( pTargetMapMode );
+}
+
+void SdrOle2Obj::setSuppressSetVisAreaSize( bool bNew )
+{
+    mpImpl->mbSuppressSetVisAreaSize = bNew;
+}
+
+void SdrOle2Obj::NbcMove(const Size& rSize)
+{
+    SdrRectObj::NbcMove(rSize);
+
+    if( !getSdrModelFromSdrObject().isLocked() )
+        ImpSetVisAreaSize();
+}
+
+bool SdrOle2Obj::CanUnloadRunningObj( const uno::Reference< embed::XEmbeddedObject >& xObj, sal_Int64 nAspect )
+{
+    uno::Reference<embed::XEmbedPersist2> xPersist(xObj, uno::UNO_QUERY);
+    if (xPersist.is())
+    {
+        if (!xPersist->isStored())
+            // It doesn't have persistent storage.  We can't unload this.
+            return false;
+    }
+
+    bool bResult = false;
+
+    sal_Int32 nState = xObj->getCurrentState();
+    if ( nState == embed::EmbedStates::LOADED )
+    {
+        // the object is already unloaded
+        bResult = true;
+    }
+    else
+    {
+        uno::Reference < util::XModifiable > xModifiable( xObj->getComponent(), uno::UNO_QUERY );
+        if ( !xModifiable.is() )
+            bResult = true;
+        else
+        {
+            sal_Int64 nMiscStatus = xObj->getStatus( nAspect );
+
+            if ( embed::EmbedMisc::MS_EMBED_ALWAYSRUN != ( nMiscStatus & embed::EmbedMisc::MS_EMBED_ALWAYSRUN ) &&
+            embed::EmbedMisc::EMBED_ACTIVATEIMMEDIATELY != ( nMiscStatus & embed::EmbedMisc::EMBED_ACTIVATEIMMEDIATELY ) &&
+            !( xModifiable.is() && xModifiable->isModified() ) &&
+            !( nState == embed::EmbedStates::INPLACE_ACTIVE || nState == embed::EmbedStates::UI_ACTIVE || nState == embed::EmbedStates::ACTIVE ) )
+            {
+                bResult = true;
+            }
+        }
+    }
+
+    return bResult;
+}
+
+bool SdrOle2Obj::Unload( const uno::Reference< embed::XEmbeddedObject >& xObj, sal_Int64 nAspect )
+{
+    bool bResult = false;
+
+    if ( CanUnloadRunningObj( xObj, nAspect ) )
+    {
+        try
+        {
+            xObj->changeState( embed::EmbedStates::LOADED );
+            bResult = true;
+        }
+        catch( css::uno::Exception& )
+        {
+            TOOLS_WARN_EXCEPTION( "svx", "SdrOle2Obj::Unload()" );
+        }
+    }
+
+    return bResult;
+}
+
+bool SdrOle2Obj::Unload()
+{
+    if (!mpImpl->mxObjRef.is())
+        // Already unloaded.
+        return true;
+
+    bool bUnloaded = false;
+
+    if ( mpImpl->mxObjRef.is() )
+    {
+        bUnloaded = Unload( mpImpl->mxObjRef.GetObject(), GetAspect() );
+    }
+
+    return bUnloaded;
+}
+
+void SdrOle2Obj::GetObjRef_Impl()
+{
+    if ( !mpImpl->mxObjRef.is() && !mpImpl->aPersistName.isEmpty() && getSdrModelFromSdrObject().GetPersist() )
+    {
+        // Only try loading if it did not went wrong up to now
+        if(!mpImpl->mbLoadingOLEObjectFailed)
+        {
+            mpImpl->mxObjRef.Assign(
+                getSdrModelFromSdrObject().GetPersist()->getEmbeddedObjectContainer().GetEmbeddedObject(mpImpl->aPersistName),
+                GetAspect());
+            mpImpl->mbTypeAsked = false;
+            CheckFileLink_Impl();
+
+            // If loading of OLE object failed, remember that to not invoke an endless
+            // loop trying to load it again and again.
+            if( mpImpl->mxObjRef.is() )
+            {
+                mpImpl->mbLoadingOLEObjectFailed = true;
+            }
+
+            // For math objects, set closed state to transparent
+            SetClosedObj(!ImplIsMathObj( mpImpl->mxObjRef.GetObject() ));
+        }
+
+        if ( mpImpl->mxObjRef.is() )
+        {
+            if( !IsEmptyPresObj() )
+            {
+                // remember modified status of model
+                const bool bWasChanged(getSdrModelFromSdrObject().IsChanged());
+
+                // perhaps preview not valid anymore
+                // This line changes the modified state of the model
+                ClearGraphic();
+
+                // if status was not set before, force it back
+                // to not set, so that SetGraphic(0) above does not
+                // set the modified state of the model.
+                if(!bWasChanged && getSdrModelFromSdrObject().IsChanged())
+                {
+                    getSdrModelFromSdrObject().SetChanged( false );
+                }
+            }
+        }
+
+        if ( mpImpl->mxObjRef.is() )
+            Connect();
+    }
+
+    if ( mpImpl->mbConnected )
+    {
+        // move object to first position in cache
+        GetSdrGlobalData().GetOLEObjCache().InsertObj(this);
+    }
+}
+
+uno::Reference < embed::XEmbeddedObject > const & SdrOle2Obj::GetObjRef() const
+{
+    const_cast<SdrOle2Obj*>(this)->GetObjRef_Impl();
+    return mpImpl->mxObjRef.GetObject();
+}
+
+uno::Reference < embed::XEmbeddedObject > const & SdrOle2Obj::GetObjRef_NoInit() const
+{
+    return mpImpl->mxObjRef.GetObject();
+}
+
+uno::Reference< frame::XModel > SdrOle2Obj::getXModel() const
+{
+    GetObjRef();
+    if ( svt::EmbeddedObjectRef::TryRunningState(mpImpl->mxObjRef.GetObject()) )
+        return uno::Reference< frame::XModel >( mpImpl->mxObjRef->getComponent(), uno::UNO_QUERY );
+    else
+        return uno::Reference< frame::XModel >();
+}
+
+bool SdrOle2Obj::IsChart() const
+{
+    if (!mpImpl->mbTypeAsked)
+    {
+        mpImpl->mbIsChart = mpImpl->mxObjRef.IsChart();
+        mpImpl->mbTypeAsked = true;
+    }
+    return mpImpl->mbIsChart;
+}
+
+void SdrOle2Obj::SetGraphicToObj( const Graphic& aGraphic )
+{
+    mpImpl->mxObjRef.SetGraphic( aGraphic, OUString() );
+    // if the object isn't valid, e.g. link to something that doesn't exist, set the fallback
+    // graphic as mxGraphic so SdrOle2Obj::GetGraphic will show the fallback
+    if (const Graphic* pObjGraphic = mpImpl->mxObjRef.is() ? nullptr : mpImpl->mxObjRef.GetGraphic())
+        mpImpl->mxGraphic.reset(new Graphic(*pObjGraphic));
+}
+
+void SdrOle2Obj::SetGraphicToObj( const uno::Reference< io::XInputStream >& xGrStream, const OUString& aMediaType )
+{
+    mpImpl->mxObjRef.SetGraphicStream( xGrStream, aMediaType );
+    // if the object isn't valid, e.g. link to something that doesn't exist, set the fallback
+    // graphic as mxGraphic so SdrOle2Obj::GetGraphic will show the fallback
+    if (const Graphic* pObjGraphic = mpImpl->mxObjRef.is() ? nullptr : mpImpl->mxObjRef.GetGraphic())
+        mpImpl->mxGraphic.reset(new Graphic(*pObjGraphic));
+}
+
+bool SdrOle2Obj::IsCalc() const
+{
+    if ( !mpImpl->mxObjRef.is() )
+        return false;
+
+    SvGlobalName aObjClsId( mpImpl->mxObjRef->getClassID() );
+    return SvGlobalName(SO3_SC_CLASSID_30) == aObjClsId
+        || SvGlobalName(SO3_SC_CLASSID_40) == aObjClsId
+        || SvGlobalName(SO3_SC_CLASSID_50) == aObjClsId
+        || SvGlobalName(SO3_SC_CLASSID_60) == aObjClsId
+        || SvGlobalName(SO3_SC_OLE_EMBED_CLASSID_60) == aObjClsId
+        || SvGlobalName(SO3_SC_OLE_EMBED_CLASSID_8) == aObjClsId
+        || SvGlobalName(SO3_SC_CLASSID) == aObjClsId;
+}
+
+uno::Reference< frame::XModel > SdrOle2Obj::GetParentXModel() const
+{
+    uno::Reference< frame::XModel > xDoc(getSdrModelFromSdrObject().getUnoModel(), uno::UNO_QUERY);
+    return xDoc;
+}
+
+bool SdrOle2Obj::CalculateNewScaling( Fraction& aScaleWidth, Fraction& aScaleHeight, Size& aObjAreaSize )
+{
+    // TODO/LEAN: to avoid rounding errors scaling always uses the VisArea.
+    // If we don't cache it for own objects also we must load the object here
+    if (!mpImpl->mxObjRef.is())
+        return false;
+
+    MapMode aMapMode(getSdrModelFromSdrObject().GetScaleUnit());
+    aObjAreaSize = mpImpl->mxObjRef.GetSize( &aMapMode );
+
+    Size aSize = maRect.GetSize();
+    aScaleWidth = Fraction(aSize.Width(),  aObjAreaSize.Width() );
+    aScaleHeight = Fraction(aSize.Height(), aObjAreaSize.Height() );
+
+    // reduce to 10 binary digits
+    aScaleHeight.ReduceInaccurate(10);
+    aScaleWidth.ReduceInaccurate(10);
+
+    return true;
+}
+
+bool SdrOle2Obj::AddOwnLightClient()
+{
+    // The Own Light Client must be registered in object only using this method!
+    if ( !SfxInPlaceClient::GetClient( dynamic_cast<SfxObjectShell*>(getSdrModelFromSdrObject().GetPersist()), mpImpl->mxObjRef.GetObject() )
+      && !( mpImpl->mxLightClient.is() && mpImpl->mxObjRef->getClientSite() == uno::Reference< embed::XEmbeddedClient >( mpImpl->mxLightClient.get() ) ) )
+    {
+        Connect();
+
+        if ( mpImpl->mxObjRef.is() && mpImpl->mxLightClient.is() )
+        {
+            Fraction aScaleWidth;
+            Fraction aScaleHeight;
+            Size aObjAreaSize;
+            if ( CalculateNewScaling( aScaleWidth, aScaleHeight, aObjAreaSize ) )
+            {
+                mpImpl->mxLightClient->SetSizeScale( aScaleWidth, aScaleHeight );
+                try {
+                    mpImpl->mxObjRef->setClientSite( mpImpl->mxLightClient.get() );
+                    return true;
+                } catch( uno::Exception& )
+                {}
+            }
+
+        }
+
+        return false;
+    }
+
+    return true;
+}
+
+Graphic SdrOle2Obj::GetEmptyOLEReplacementGraphic()
+{
+    return Graphic(BitmapEx(BMP_SVXOLEOBJ));
+}
+
+void SdrOle2Obj::SetWindow(const css::uno::Reference < css::awt::XWindow >& _xWindow)
+{
+    if ( mpImpl->mxObjRef.is() && mpImpl->mxLightClient.is() )
+    {
+        mpImpl->mxLightClient->setWindow(_xWindow);
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdopage.cxx b/svx/source/svdraw/svdopage.cxx
new file mode 100644
index 000000000..aa91331b5
--- /dev/null
+++ b/svx/source/svdraw/svdopage.cxx
@@ -0,0 +1,183 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdopage.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdmodel.hxx>
+#include <svx/svdpage.hxx>
+#include <sdr/properties/pageproperties.hxx>
+#include <sdr/contact/viewcontactofpageobj.hxx>
+#include <rtl/ustrbuf.hxx>
+
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrPageObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::PageProperties>(*this);
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrPageObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfPageObj>(*this);
+}
+
+
+// this method is called from the destructor of the referenced page.
+// do all necessary action to forget the page. It is not necessary to call
+// RemovePageUser(), that is done from the destructor.
+void SdrPageObj::PageInDestruction(const SdrPage& rPage)
+{
+    if(mpShownPage && mpShownPage == &rPage)
+    {
+        // #i58769# Do not call ActionChanged() here, because that would
+        // lead to the construction of a view contact object for a page that
+        // is being destroyed.
+
+        mpShownPage = nullptr;
+    }
+}
+
+SdrPageObj::SdrPageObj(
+    SdrModel& rSdrModel,
+    SdrPage* pNewPage)
+:   SdrObject(rSdrModel),
+    mpShownPage(pNewPage)
+{
+    if(mpShownPage)
+    {
+        mpShownPage->AddPageUser(*this);
+    }
+}
+
+SdrPageObj::SdrPageObj(
+    SdrModel& rSdrModel,
+    const tools::Rectangle& rRect,
+    SdrPage* pNewPage)
+:   SdrObject(rSdrModel),
+    mpShownPage(pNewPage)
+{
+    if(mpShownPage)
+    {
+        mpShownPage->AddPageUser(*this);
+    }
+
+    aOutRect = rRect;
+}
+
+SdrPageObj::~SdrPageObj()
+{
+    if(mpShownPage)
+    {
+        mpShownPage->RemovePageUser(*this);
+    }
+}
+
+
+void SdrPageObj::SetReferencedPage(SdrPage* pNewPage)
+{
+    if(mpShownPage != pNewPage)
+    {
+        if(mpShownPage)
+        {
+            mpShownPage->RemovePageUser(*this);
+        }
+
+        mpShownPage = pNewPage;
+
+        if(mpShownPage)
+        {
+            mpShownPage->AddPageUser(*this);
+        }
+
+        SetChanged();
+        BroadcastObjectChange();
+    }
+}
+
+// #i96598#
+void SdrPageObj::SetBoundRectDirty()
+{
+    // avoid resetting aOutRect which in case of this object is model data,
+    // not re-creatable view data
+}
+
+sal_uInt16 SdrPageObj::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_PAGE);
+}
+
+void SdrPageObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bRotateFreeAllowed=false;
+    rInfo.bRotate90Allowed  =false;
+    rInfo.bMirrorFreeAllowed=false;
+    rInfo.bMirror45Allowed  =false;
+    rInfo.bMirror90Allowed  =false;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed     =false;
+    rInfo.bEdgeRadiusAllowed=false;
+    rInfo.bNoOrthoDesired   =false;
+    rInfo.bCanConvToPath    =false;
+    rInfo.bCanConvToPoly    =false;
+    rInfo.bCanConvToPathLineToArea=false;
+    rInfo.bCanConvToPolyLineToArea=false;
+}
+
+SdrPageObj* SdrPageObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrPageObj >(rTargetModel);
+}
+
+SdrPageObj& SdrPageObj::operator=(const SdrPageObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrObject::operator=(rObj);
+    SetReferencedPage( rObj.GetReferencedPage());
+    return *this;
+}
+
+OUString SdrPageObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulPAGE));
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrPageObj::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralPAGE);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdopath.cxx b/svx/source/svdraw/svdopath.cxx
new file mode 100644
index 000000000..93b08170f
--- /dev/null
+++ b/svx/source/svdraw/svdopath.cxx
@@ -0,0 +1,2982 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <tools/bigint.hxx>
+#include <tools/helpers.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <svx/svdopath.hxx>
+#include <math.h>
+#include <svx/xpoly.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/svdview.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+
+#include <svx/polypolygoneditor.hxx>
+#include <sdr/contact/viewcontactofsdrpathobj.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/point/b2dpoint.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <basegfx/curve/b2dcubicbezier.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <sdr/attribute/sdrtextattribute.hxx>
+#include <sdr/primitive2d/sdrattributecreator.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <sdr/attribute/sdrformtextattribute.hxx>
+#include <vcl/ptrstyle.hxx>
+#include <memory>
+#include <sal/log.hxx>
+
+using namespace sdr;
+
+static sal_uInt16 GetPrevPnt(sal_uInt16 nPnt, sal_uInt16 nPntMax, bool bClosed)
+{
+    if (nPnt>0) {
+        nPnt--;
+    } else {
+        nPnt=nPntMax;
+        if (bClosed) nPnt--;
+    }
+    return nPnt;
+}
+
+static sal_uInt16 GetNextPnt(sal_uInt16 nPnt, sal_uInt16 nPntMax, bool bClosed)
+{
+    nPnt++;
+    if (nPnt>nPntMax || (bClosed && nPnt>=nPntMax)) nPnt=0;
+    return nPnt;
+}
+
+namespace {
+
+struct ImpSdrPathDragData  : public SdrDragStatUserData
+{
+    XPolygon                    aXP;            // section of the original polygon
+    bool                        bValid;         // FALSE = too few points
+    bool                        bClosed;        // closed object?
+    sal_uInt16                  nPoly;          // number of the polygon in the PolyPolygon
+    sal_uInt16                  nPnt;           // number of point in the above polygon
+    sal_uInt16                  nPointCount;    // number of points of the polygon
+    bool                        bBegPnt;        // dragged point is first point of a Polyline
+    bool                        bEndPnt;        // dragged point is finishing point of a Polyline
+    sal_uInt16                  nPrevPnt;       // index of previous point
+    sal_uInt16                  nNextPnt;       // index of next point
+    bool                        bPrevIsBegPnt;  // previous point is first point of a Polyline
+    bool                        bNextIsEndPnt;  // next point is first point of a Polyline
+    sal_uInt16                  nPrevPrevPnt;   // index of point before previous point
+    sal_uInt16                  nNextNextPnt;   // index of point after next point
+    bool                        bControl;       // point is a control point
+    bool                        bIsNextControl; // point is a control point after a support point
+    bool                        bPrevIsControl; // if nPnt is a support point: a control point comes before
+    bool                        bNextIsControl; // if nPnt is a support point: a control point comes after
+    sal_uInt16                  nPrevPrevPnt0;
+    sal_uInt16                  nPrevPnt0;
+    sal_uInt16                  nPnt0;
+    sal_uInt16                  nNextPnt0;
+    sal_uInt16                  nNextNextPnt0;
+    bool                        bEliminate;     // delete point? (is set by MovDrag)
+
+    bool                        mbMultiPointDrag;
+    const XPolyPolygon          maOrig;
+    XPolyPolygon                maMove;
+    std::vector<SdrHdl*>        maHandles;
+
+public:
+    ImpSdrPathDragData(const SdrPathObj& rPO, const SdrHdl& rHdl, bool bMuPoDr, const SdrDragStat& rDrag);
+    void ResetPoly(const SdrPathObj& rPO);
+    bool IsMultiPointDrag() const { return mbMultiPointDrag; }
+};
+
+}
+
+ImpSdrPathDragData::ImpSdrPathDragData(const SdrPathObj& rPO, const SdrHdl& rHdl, bool bMuPoDr, const SdrDragStat& rDrag)
+    : aXP(5)
+    , bValid(false)
+    , bClosed(false)
+    , nPoly(0)
+    , nPnt(0)
+    , nPointCount(0)
+    , bBegPnt(false)
+    , bEndPnt(false)
+    , nPrevPnt(0)
+    , nNextPnt(0)
+    , bPrevIsBegPnt(false)
+    , bNextIsEndPnt(false)
+    , nPrevPrevPnt(0)
+    , nNextNextPnt(0)
+    , bControl(false)
+    , bIsNextControl(false)
+    , bPrevIsControl(false)
+    , bNextIsControl(false)
+    , nPrevPrevPnt0(0)
+    , nPrevPnt0(0)
+    , nPnt0(0)
+    , nNextPnt0(0)
+    , nNextNextPnt0(0)
+    , bEliminate(false)
+    , mbMultiPointDrag(bMuPoDr)
+    , maOrig(rPO.GetPathPoly())
+    , maHandles(0)
+{
+    if(mbMultiPointDrag)
+    {
+        const SdrMarkView& rMarkView = *rDrag.GetView();
+        const SdrHdlList& rHdlList = rMarkView.GetHdlList();
+        const size_t nHdlCount = rHdlList.GetHdlCount();
+        const SdrObject* pInteractionObject(nHdlCount && rHdlList.GetHdl(0) ? rHdlList.GetHdl(0)->GetObj() : nullptr);
+
+        for(size_t a = 0; a < nHdlCount; ++a)
+        {
+            SdrHdl* pTestHdl = rHdlList.GetHdl(a);
+
+            if(pTestHdl && pTestHdl->IsSelected() && pTestHdl->GetObj() == pInteractionObject)
+            {
+                maHandles.push_back(pTestHdl);
+            }
+        }
+
+        maMove = maOrig;
+        bValid = true;
+    }
+    else
+    {
+        sal_uInt16 nPntMax = 0; // maximum index
+        bValid=false;
+        bClosed=rPO.IsClosed();          // closed object?
+        nPoly=static_cast<sal_uInt16>(rHdl.GetPolyNum());            // number of the polygon in the PolyPolygon
+        nPnt=static_cast<sal_uInt16>(rHdl.GetPointNum());            // number of points in the above polygon
+        const XPolygon aTmpXP(rPO.GetPathPoly().getB2DPolygon(nPoly));
+        nPointCount=aTmpXP.GetPointCount();        // number of point of the polygon
+        if (nPointCount==0 || (bClosed && nPointCount==1)) return; // minimum of 1 points for Lines, minimum of 2 points for Polygon
+        nPntMax=nPointCount-1;                  // maximum index
+        bBegPnt=!bClosed && nPnt==0;        // dragged point is first point of a Polyline
+        bEndPnt=!bClosed && nPnt==nPntMax;  // dragged point is finishing point of a Polyline
+        if (bClosed && nPointCount<=3) {        // if polygon is only a line
+            bBegPnt=(nPointCount<3) || nPnt==0;
+            bEndPnt=(nPointCount<3) || nPnt==nPntMax-1;
+        }
+        nPrevPnt=nPnt;                      // index of previous point
+        nNextPnt=nPnt;                      // index of next point
+        if (!bBegPnt) nPrevPnt=GetPrevPnt(nPnt,nPntMax,bClosed);
+        if (!bEndPnt) nNextPnt=GetNextPnt(nPnt,nPntMax,bClosed);
+        bPrevIsBegPnt=bBegPnt || (!bClosed && nPrevPnt==0);
+        bNextIsEndPnt=bEndPnt || (!bClosed && nNextPnt==nPntMax);
+        nPrevPrevPnt=nPnt;                  // index of point before previous point
+        nNextNextPnt=nPnt;                  // index of point after next point
+        if (!bPrevIsBegPnt) nPrevPrevPnt=GetPrevPnt(nPrevPnt,nPntMax,bClosed);
+        if (!bNextIsEndPnt) nNextNextPnt=GetNextPnt(nNextPnt,nPntMax,bClosed);
+        bControl=rHdl.IsPlusHdl();          // point is a control point
+        bIsNextControl=false;               // point is a control point after a support point
+        bPrevIsControl=false;               // if nPnt is a support point: a control point comes before
+        bNextIsControl=false;               // if nPnt is a support point: a control point comes after
+        if (bControl) {
+            bIsNextControl=!aTmpXP.IsControl(nPrevPnt);
+        } else {
+            bPrevIsControl=!bBegPnt && !bPrevIsBegPnt && aTmpXP.GetFlags(nPrevPnt)==PolyFlags::Control;
+            bNextIsControl=!bEndPnt && !bNextIsEndPnt && aTmpXP.GetFlags(nNextPnt)==PolyFlags::Control;
+        }
+        nPrevPrevPnt0=nPrevPrevPnt;
+        nPrevPnt0    =nPrevPnt;
+        nPnt0        =nPnt;
+        nNextPnt0    =nNextPnt;
+        nNextNextPnt0=nNextNextPnt;
+        nPrevPrevPnt=0;
+        nPrevPnt=1;
+        nPnt=2;
+        nNextPnt=3;
+        nNextNextPnt=4;
+        bEliminate=false;
+        ResetPoly(rPO);
+        bValid=true;
+    }
+}
+
+void ImpSdrPathDragData::ResetPoly(const SdrPathObj& rPO)
+{
+    const XPolygon aTmpXP(rPO.GetPathPoly().getB2DPolygon(nPoly));
+    aXP[0]=aTmpXP[nPrevPrevPnt0];  aXP.SetFlags(0,aTmpXP.GetFlags(nPrevPrevPnt0));
+    aXP[1]=aTmpXP[nPrevPnt0];      aXP.SetFlags(1,aTmpXP.GetFlags(nPrevPnt0));
+    aXP[2]=aTmpXP[nPnt0];          aXP.SetFlags(2,aTmpXP.GetFlags(nPnt0));
+    aXP[3]=aTmpXP[nNextPnt0];      aXP.SetFlags(3,aTmpXP.GetFlags(nNextPnt0));
+    aXP[4]=aTmpXP[nNextNextPnt0];  aXP.SetFlags(4,aTmpXP.GetFlags(nNextNextPnt0));
+}
+
+namespace {
+
+struct ImpPathCreateUser  : public SdrDragStatUserData
+{
+    Point                   aBezControl0;
+    Point                   aBezStart;
+    Point                   aBezCtrl1;
+    Point                   aBezCtrl2;
+    Point                   aBezEnd;
+    Point                   aCircStart;
+    Point                   aCircEnd;
+    Point                   aCircCenter;
+    Point                   aLineStart;
+    Point                   aLineEnd;
+    Point                   aRectP1;
+    Point                   aRectP2;
+    Point                   aRectP3;
+    long                    nCircRadius;
+    long                    nCircStAngle;
+    long                    nCircRelAngle;
+    bool                    bBezier;
+    bool                    bBezHasCtrl0;
+    bool                    bCircle;
+    bool                    bAngleSnap;
+    bool                    bLine;
+    bool                    bLine90;
+    bool                    bRect;
+    bool                    bMixedCreate;
+    sal_uInt16                  nBezierStartPoint;
+    SdrObjKind              eStartKind;
+    SdrObjKind              eCurrentKind;
+
+public:
+    ImpPathCreateUser(): nCircRadius(0),nCircStAngle(0),nCircRelAngle(0),
+        bBezier(false),bBezHasCtrl0(false),bCircle(false),bAngleSnap(false),bLine(false),bLine90(false),bRect(false),
+        bMixedCreate(false),nBezierStartPoint(0),eStartKind(OBJ_NONE),eCurrentKind(OBJ_NONE) { }
+
+    void ResetFormFlags() { bBezier=false; bCircle=false; bLine=false; bRect=false; }
+    bool IsFormFlag() const { return bBezier || bCircle || bLine || bRect; }
+    XPolygon GetFormPoly() const;
+    void CalcBezier(const Point& rP1, const Point& rP2, const Point& rDir, bool bMouseDown);
+    XPolygon GetBezierPoly() const;
+    void CalcCircle(const Point& rP1, const Point& rP2, const Point& rDir, SdrView const * pView);
+    XPolygon GetCirclePoly() const;
+    void CalcLine(const Point& rP1, const Point& rP2, const Point& rDir, SdrView const * pView);
+    static Point    CalcLine(const Point& rCsr, long nDirX, long nDirY, SdrView const * pView);
+    XPolygon GetLinePoly() const;
+    void CalcRect(const Point& rP1, const Point& rP2, const Point& rDir, SdrView const * pView);
+    XPolygon GetRectPoly() const;
+};
+
+}
+
+XPolygon ImpPathCreateUser::GetFormPoly() const
+{
+    if (bBezier) return GetBezierPoly();
+    if (bCircle) return GetCirclePoly();
+    if (bLine)   return GetLinePoly();
+    if (bRect)   return GetRectPoly();
+    return XPolygon();
+}
+
+void ImpPathCreateUser::CalcBezier(const Point& rP1, const Point& rP2, const Point& rDir, bool bMouseDown)
+{
+    aBezStart=rP1;
+    aBezCtrl1=rP1+rDir;
+    aBezCtrl2=rP2;
+
+    // #i21479#
+    // Also copy the end point when no end point is set yet
+    if (!bMouseDown || (0 == aBezEnd.X() && 0 == aBezEnd.Y())) aBezEnd=rP2;
+
+    bBezier=true;
+}
+
+XPolygon ImpPathCreateUser::GetBezierPoly() const
+{
+    XPolygon aXP(4);
+    aXP[0]=aBezStart; aXP.SetFlags(0,PolyFlags::Smooth);
+    aXP[1]=aBezCtrl1; aXP.SetFlags(1,PolyFlags::Control);
+    aXP[2]=aBezCtrl2; aXP.SetFlags(2,PolyFlags::Control);
+    aXP[3]=aBezEnd;
+    return aXP;
+}
+
+void ImpPathCreateUser::CalcCircle(const Point& rP1, const Point& rP2, const Point& rDir, SdrView const * pView)
+{
+    long nTangAngle=GetAngle(rDir);
+    aCircStart=rP1;
+    aCircEnd=rP2;
+    aCircCenter=rP1;
+    long dx=rP2.X()-rP1.X();
+    long dy=rP2.Y()-rP1.Y();
+    long dAngle=GetAngle(Point(dx,dy))-nTangAngle;
+    dAngle=NormAngle36000(dAngle);
+    long nTmpAngle=NormAngle36000(9000-dAngle);
+    bool bRet=nTmpAngle!=9000 && nTmpAngle!=27000;
+    long nRad=0;
+    if (bRet) {
+        double cs = cos(nTmpAngle * F_PI18000);
+        double nR=static_cast<double>(GetLen(Point(dx,dy)))/cs/2;
+        nRad=std::abs(FRound(nR));
+    }
+    if (dAngle<18000) {
+        nCircStAngle=NormAngle36000(nTangAngle-9000);
+        nCircRelAngle=NormAngle36000(2*dAngle);
+        aCircCenter.AdjustX(FRound(nRad * cos((nTangAngle + 9000) * F_PI18000)));
+        aCircCenter.AdjustY(-(FRound(nRad * sin((nTangAngle + 9000) * F_PI18000))));
+    } else {
+        nCircStAngle=NormAngle36000(nTangAngle+9000);
+        nCircRelAngle=-NormAngle36000(36000-2*dAngle);
+        aCircCenter.AdjustX(FRound(nRad * cos((nTangAngle - 9000) * F_PI18000)));
+        aCircCenter.AdjustY(-(FRound(nRad * sin((nTangAngle - 9000) * F_PI18000))));
+    }
+    bAngleSnap=pView!=nullptr && pView->IsAngleSnapEnabled();
+    if (bAngleSnap) {
+        long nSA=pView->GetSnapAngle();
+        if (nSA!=0) { // angle snapping
+            bool bNeg=nCircRelAngle<0;
+            if (bNeg) nCircRelAngle=-nCircRelAngle;
+            nCircRelAngle+=nSA/2;
+            nCircRelAngle/=nSA;
+            nCircRelAngle*=nSA;
+            nCircRelAngle=NormAngle36000(nCircRelAngle);
+            if (bNeg) nCircRelAngle=-nCircRelAngle;
+        }
+    }
+    nCircRadius=nRad;
+    if (nRad==0 || std::abs(nCircRelAngle)<5) bRet=false;
+    bCircle=bRet;
+}
+
+XPolygon ImpPathCreateUser::GetCirclePoly() const
+{
+    if (nCircRelAngle>=0) {
+        XPolygon aXP(aCircCenter,nCircRadius,nCircRadius,
+                     sal_uInt16((nCircStAngle+5)/10),sal_uInt16((nCircStAngle+nCircRelAngle+5)/10),false);
+        aXP[0]=aCircStart; aXP.SetFlags(0,PolyFlags::Smooth);
+        if (!bAngleSnap) aXP[aXP.GetPointCount()-1]=aCircEnd;
+        return aXP;
+    } else {
+        XPolygon aXP(aCircCenter,nCircRadius,nCircRadius,
+                     sal_uInt16(NormAngle36000(nCircStAngle+nCircRelAngle+5)/10),sal_uInt16((nCircStAngle+5)/10),false);
+        sal_uInt16 nCount=aXP.GetPointCount();
+        for (sal_uInt16 nNum=nCount/2; nNum>0;) {
+            nNum--; // reverse XPoly's order of points
+            sal_uInt16 n2=nCount-nNum-1;
+            Point aPt(aXP[nNum]);
+            aXP[nNum]=aXP[n2];
+            aXP[n2]=aPt;
+        }
+        aXP[0]=aCircStart; aXP.SetFlags(0,PolyFlags::Smooth);
+        if (!bAngleSnap) aXP[aXP.GetPointCount()-1]=aCircEnd;
+        return aXP;
+    }
+}
+
+Point ImpPathCreateUser::CalcLine(const Point& aCsr, long nDirX, long nDirY, SdrView const * pView)
+{
+    long x=aCsr.X();
+    long y=aCsr.Y();
+    bool bHLin=nDirY==0;
+    bool bVLin=nDirX==0;
+    if (bHLin) y=0;
+    else if (bVLin) x=0;
+    else {
+        long x1=BigMulDiv(y,nDirX,nDirY);
+        long y1=y;
+        long x2=x;
+        long y2=BigMulDiv(x,nDirY,nDirX);
+        long l1=std::abs(x1)+std::abs(y1);
+        long l2=std::abs(x2)+std::abs(y2);
+        if ((l1<=l2) != (pView!=nullptr && pView->IsBigOrtho())) {
+            x=x1; y=y1;
+        } else {
+            x=x2; y=y2;
+        }
+    }
+    return Point(x,y);
+}
+
+void ImpPathCreateUser::CalcLine(const Point& rP1, const Point& rP2, const Point& rDir, SdrView const * pView)
+{
+    aLineStart=rP1;
+    aLineEnd=rP2;
+    bLine90=false;
+    if (rP1==rP2 || (rDir.X()==0 && rDir.Y()==0)) { bLine=false; return; }
+    Point aTmpPt(rP2-rP1);
+    long nDirX=rDir.X();
+    long nDirY=rDir.Y();
+    Point aP1(CalcLine(aTmpPt, nDirX, nDirY,pView)); aP1-=aTmpPt; long nQ1=std::abs(aP1.X())+std::abs(aP1.Y());
+    Point aP2(CalcLine(aTmpPt, nDirY,-nDirX,pView)); aP2-=aTmpPt; long nQ2=std::abs(aP2.X())+std::abs(aP2.Y());
+    if (pView!=nullptr && pView->IsOrtho()) nQ1=0; // Ortho turns off at right angle
+    bLine90=nQ1>2*nQ2;
+    if (!bLine90) { // smooth transition
+        aLineEnd+=aP1;
+    } else {          // rectangular transition
+        aLineEnd+=aP2;
+    }
+    bLine=true;
+}
+
+XPolygon ImpPathCreateUser::GetLinePoly() const
+{
+    XPolygon aXP(2);
+    aXP[0]=aLineStart; if (!bLine90) aXP.SetFlags(0,PolyFlags::Smooth);
+    aXP[1]=aLineEnd;
+    return aXP;
+}
+
+void ImpPathCreateUser::CalcRect(const Point& rP1, const Point& rP2, const Point& rDir, SdrView const * pView)
+{
+    aRectP1=rP1;
+    aRectP2=rP1;
+    aRectP3=rP2;
+    if (rP1==rP2 || (rDir.X()==0 && rDir.Y()==0)) { bRect=false; return; }
+    Point aTmpPt(rP2-rP1);
+    long nDirX=rDir.X();
+    long nDirY=rDir.Y();
+    long x=aTmpPt.X();
+    long y=aTmpPt.Y();
+    bool bHLin=nDirY==0;
+    bool bVLin=nDirX==0;
+    if (bHLin) y=0;
+    else if (bVLin) x=0;
+    else {
+        y=BigMulDiv(x,nDirY,nDirX);
+        long nHypLen=aTmpPt.Y()-y;
+        long nTangAngle=-GetAngle(rDir);
+        // sin=g/h, g=h*sin
+        double a = nTangAngle * F_PI18000;
+        double sn=sin(a);
+        double cs=cos(a);
+        double nGKathLen=nHypLen*sn;
+        y+=FRound(nGKathLen*sn);
+        x+=FRound(nGKathLen*cs);
+    }
+    aRectP2.AdjustX(x );
+    aRectP2.AdjustY(y );
+    if (pView!=nullptr && pView->IsOrtho()) {
+        long dx1=aRectP2.X()-aRectP1.X(); long dx1a=std::abs(dx1);
+        long dy1=aRectP2.Y()-aRectP1.Y(); long dy1a=std::abs(dy1);
+        long dx2=aRectP3.X()-aRectP2.X(); long dx2a=std::abs(dx2);
+        long dy2=aRectP3.Y()-aRectP2.Y(); long dy2a=std::abs(dy2);
+        bool b1MoreThan2=dx1a+dy1a>dx2a+dy2a;
+        if (b1MoreThan2 != pView->IsBigOrtho()) {
+            long xtemp=dy2a-dx1a; if (dx1<0) xtemp=-xtemp;
+            long ytemp=dx2a-dy1a; if (dy1<0) ytemp=-ytemp;
+            aRectP2.AdjustX(xtemp );
+            aRectP2.AdjustY(ytemp );
+            aRectP3.AdjustX(xtemp );
+            aRectP3.AdjustY(ytemp );
+        } else {
+            long xtemp=dy1a-dx2a; if (dx2<0) xtemp=-xtemp;
+            long ytemp=dx1a-dy2a; if (dy2<0) ytemp=-ytemp;
+            aRectP3.AdjustX(xtemp );
+            aRectP3.AdjustY(ytemp );
+        }
+    }
+    bRect=true;
+}
+
+XPolygon ImpPathCreateUser::GetRectPoly() const
+{
+    XPolygon aXP(3);
+    aXP[0]=aRectP1; aXP.SetFlags(0,PolyFlags::Smooth);
+    aXP[1]=aRectP2;
+    if (aRectP3!=aRectP2) aXP[2]=aRectP3;
+    return aXP;
+}
+
+class ImpPathForDragAndCreate
+{
+    SdrPathObj&                 mrSdrPathObject;
+    XPolyPolygon                aPathPolygon;
+    SdrObjKind                  meObjectKind;
+    std::unique_ptr<ImpSdrPathDragData>
+                                mpSdrPathDragData;
+    bool                        mbCreating;
+
+public:
+    explicit ImpPathForDragAndCreate(SdrPathObj& rSdrPathObject);
+
+    // drag stuff
+    bool beginPathDrag( SdrDragStat const & rDrag )  const;
+    bool movePathDrag( SdrDragStat& rDrag ) const;
+    bool endPathDrag( SdrDragStat const & rDrag );
+    OUString getSpecialDragComment(const SdrDragStat& rDrag) const;
+    basegfx::B2DPolyPolygon getSpecialDragPoly(const SdrDragStat& rDrag) const;
+
+    // create stuff
+    void BegCreate(SdrDragStat& rStat);
+    bool MovCreate(SdrDragStat& rStat);
+    bool EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd);
+    bool BckCreate(SdrDragStat const & rStat);
+    void BrkCreate(SdrDragStat& rStat);
+    PointerStyle GetCreatePointer() const;
+
+    // helping stuff
+    static bool IsClosed(SdrObjKind eKind) { return eKind==OBJ_POLY || eKind==OBJ_PATHPOLY || eKind==OBJ_PATHFILL || eKind==OBJ_FREEFILL || eKind==OBJ_SPLNFILL; }
+    static bool IsFreeHand(SdrObjKind eKind) { return eKind==OBJ_FREELINE || eKind==OBJ_FREEFILL; }
+    static bool IsBezier(SdrObjKind eKind) { return eKind==OBJ_PATHLINE || eKind==OBJ_PATHFILL; }
+    bool IsCreating() const { return mbCreating; }
+
+    // get the polygon
+    basegfx::B2DPolyPolygon TakeObjectPolyPolygon(const SdrDragStat& rDrag) const;
+    static basegfx::B2DPolyPolygon TakeDragPolyPolygon(const SdrDragStat& rDrag);
+    basegfx::B2DPolyPolygon getModifiedPolyPolygon() const { return  aPathPolygon.getB2DPolyPolygon(); }
+};
+
+ImpPathForDragAndCreate::ImpPathForDragAndCreate(SdrPathObj& rSdrPathObject)
+:   mrSdrPathObject(rSdrPathObject),
+    aPathPolygon(rSdrPathObject.GetPathPoly()),
+    meObjectKind(mrSdrPathObject.meKind),
+    mbCreating(false)
+{
+}
+
+bool ImpPathForDragAndCreate::beginPathDrag( SdrDragStat const & rDrag )  const
+{
+    const SdrHdl* pHdl=rDrag.GetHdl();
+    if(!pHdl)
+        return false;
+
+    bool bMultiPointDrag(true);
+
+    if(aPathPolygon[static_cast<sal_uInt16>(pHdl->GetPolyNum())].IsControl(static_cast<sal_uInt16>(pHdl->GetPointNum())))
+        bMultiPointDrag = false;
+
+    if(bMultiPointDrag)
+    {
+        const SdrMarkView& rMarkView = *rDrag.GetView();
+        const SdrHdlList& rHdlList = rMarkView.GetHdlList();
+        const size_t nHdlCount = rHdlList.GetHdlCount();
+        const SdrObject* pInteractionObject(nHdlCount && rHdlList.GetHdl(0) ? rHdlList.GetHdl(0)->GetObj() : nullptr);
+        sal_uInt32 nSelectedPoints(0);
+
+        for(size_t a = 0; a < nHdlCount; ++a)
+        {
+            SdrHdl* pTestHdl = rHdlList.GetHdl(a);
+
+            if(pTestHdl && pTestHdl->IsSelected() && pTestHdl->GetObj() == pInteractionObject)
+            {
+                nSelectedPoints++;
+            }
+        }
+
+        if(nSelectedPoints <= 1)
+            bMultiPointDrag = false;
+    }
+
+    const_cast<ImpPathForDragAndCreate*>(this)->mpSdrPathDragData.reset( new ImpSdrPathDragData(mrSdrPathObject,*pHdl,bMultiPointDrag,rDrag) );
+
+    if(!mpSdrPathDragData || !mpSdrPathDragData->bValid)
+    {
+        OSL_FAIL("ImpPathForDragAndCreate::BegDrag(): ImpSdrPathDragData is invalid.");
+        const_cast<ImpPathForDragAndCreate*>(this)->mpSdrPathDragData.reset();
+        return false;
+    }
+
+    return true;
+}
+
+bool ImpPathForDragAndCreate::movePathDrag( SdrDragStat& rDrag ) const
+{
+    if(!mpSdrPathDragData || !mpSdrPathDragData->bValid)
+    {
+        OSL_FAIL("ImpPathForDragAndCreate::MovDrag(): ImpSdrPathDragData is invalid.");
+        return false;
+    }
+
+    if(mpSdrPathDragData->IsMultiPointDrag())
+    {
+        Point aDelta(rDrag.GetNow() - rDrag.GetStart());
+
+        if(aDelta.X() || aDelta.Y())
+        {
+            for(SdrHdl* pHandle : mpSdrPathDragData->maHandles)
+            {
+                const sal_uInt16 nPolyIndex(static_cast<sal_uInt16>(pHandle->GetPolyNum()));
+                const sal_uInt16 nPointIndex(static_cast<sal_uInt16>(pHandle->GetPointNum()));
+                const XPolygon& rOrig = mpSdrPathDragData->maOrig[nPolyIndex];
+                XPolygon& rMove = mpSdrPathDragData->maMove[nPolyIndex];
+                const sal_uInt16 nPointCount(rOrig.GetPointCount());
+                bool bClosed(rOrig[0] == rOrig[nPointCount-1]);
+
+                // move point itself
+                rMove[nPointIndex] = rOrig[nPointIndex] + aDelta;
+
+                // when point is first and poly closed, move close point, too.
+                if(nPointCount > 0 && !nPointIndex && bClosed)
+                {
+                    rMove[nPointCount - 1] = rOrig[nPointCount - 1] + aDelta;
+
+                    // when moving the last point it may be necessary to move the
+                    // control point in front of this one, too.
+                    if(nPointCount > 1 && rOrig.IsControl(nPointCount - 2))
+                        rMove[nPointCount - 2] = rOrig[nPointCount - 2] + aDelta;
+                }
+
+                // is a control point before this?
+                if(nPointIndex > 0 && rOrig.IsControl(nPointIndex - 1))
+                {
+                    // Yes, move it, too
+                    rMove[nPointIndex - 1] = rOrig[nPointIndex - 1] + aDelta;
+                }
+
+                // is a control point after this?
+                if(nPointIndex + 1 < nPointCount && rOrig.IsControl(nPointIndex + 1))
+                {
+                    // Yes, move it, too
+                    rMove[nPointIndex + 1] = rOrig[nPointIndex + 1] + aDelta;
+                }
+            }
+        }
+    }
+    else
+    {
+        mpSdrPathDragData->ResetPoly(mrSdrPathObject);
+
+        // copy certain data locally to use less code and have faster access times
+        bool bClosed           =mpSdrPathDragData->bClosed       ; // closed object?
+        sal_uInt16   nPnt          =mpSdrPathDragData->nPnt          ; // number of point in the above polygon
+        bool bBegPnt           =mpSdrPathDragData->bBegPnt       ; // dragged point is first point of a Polyline
+        bool bEndPnt           =mpSdrPathDragData->bEndPnt       ; // dragged point is last point of a Polyline
+        sal_uInt16   nPrevPnt      =mpSdrPathDragData->nPrevPnt      ; // index of previous point
+        sal_uInt16   nNextPnt      =mpSdrPathDragData->nNextPnt      ; // index of next point
+        bool bPrevIsBegPnt     =mpSdrPathDragData->bPrevIsBegPnt ; // previous point is first point of a Polyline
+        bool bNextIsEndPnt     =mpSdrPathDragData->bNextIsEndPnt ; // next point is last point of a Polyline
+        sal_uInt16   nPrevPrevPnt  =mpSdrPathDragData->nPrevPrevPnt  ; // index of the point before the previous point
+        sal_uInt16   nNextNextPnt  =mpSdrPathDragData->nNextNextPnt  ; // index if the point after the next point
+        bool bControl          =mpSdrPathDragData->bControl      ; // point is a control point
+        bool bIsNextControl    =mpSdrPathDragData->bIsNextControl; // point is a control point after a support point
+        bool bPrevIsControl    =mpSdrPathDragData->bPrevIsControl; // if nPnt is a support point: there's a control point before
+        bool bNextIsControl    =mpSdrPathDragData->bNextIsControl; // if nPnt is a support point: there's a control point after
+
+        // Ortho for lines/polygons: keep angle
+        if (!bControl && rDrag.GetView()!=nullptr && rDrag.GetView()->IsOrtho()) {
+            bool bBigOrtho=rDrag.GetView()->IsBigOrtho();
+            Point  aPos(rDrag.GetNow());      // current position
+            Point  aPnt(mpSdrPathDragData->aXP[nPnt]);      // the dragged point
+            sal_uInt16 nPnt1=0xFFFF,nPnt2=0xFFFF; // its neighboring points
+            Point  aNewPos1,aNewPos2;         // new alternative for aPos
+            bool bPnt1 = false, bPnt2 = false; // are these valid alternatives?
+            if (!bClosed && mpSdrPathDragData->nPointCount>=2) { // minimum of 2 points for lines
+                if (!bBegPnt) nPnt1=nPrevPnt;
+                if (!bEndPnt) nPnt2=nNextPnt;
+            }
+            if (bClosed && mpSdrPathDragData->nPointCount>=3) { // minimum of 3 points for polygon
+                nPnt1=nPrevPnt;
+                nPnt2=nNextPnt;
+            }
+            if (nPnt1!=0xFFFF && !bPrevIsControl) {
+                Point aPnt1=mpSdrPathDragData->aXP[nPnt1];
+                long ndx0=aPnt.X()-aPnt1.X();
+                long ndy0=aPnt.Y()-aPnt1.Y();
+                bool bHLin=ndy0==0;
+                bool bVLin=ndx0==0;
+                if (!bHLin || !bVLin) {
+                    long ndx=aPos.X()-aPnt1.X();
+                    long ndy=aPos.Y()-aPnt1.Y();
+                    bPnt1=true;
+                    double nXFact=0; if (!bVLin) nXFact=static_cast<double>(ndx)/static_cast<double>(ndx0);
+                    double nYFact=0; if (!bHLin) nYFact=static_cast<double>(ndy)/static_cast<double>(ndy0);
+                    bool bHor=bHLin || (!bVLin && (nXFact>nYFact) ==bBigOrtho);
+                    bool bVer=bVLin || (!bHLin && (nXFact<=nYFact)==bBigOrtho);
+                    if (bHor) ndy=long(ndy0*nXFact);
+                    if (bVer) ndx=long(ndx0*nYFact);
+                    aNewPos1=aPnt1;
+                    aNewPos1.AdjustX(ndx );
+                    aNewPos1.AdjustY(ndy );
+                }
+            }
+            if (nPnt2!=0xFFFF && !bNextIsControl) {
+                Point aPnt2=mpSdrPathDragData->aXP[nPnt2];
+                long ndx0=aPnt.X()-aPnt2.X();
+                long ndy0=aPnt.Y()-aPnt2.Y();
+                bool bHLin=ndy0==0;
+                bool bVLin=ndx0==0;
+                if (!bHLin || !bVLin) {
+                    long ndx=aPos.X()-aPnt2.X();
+                    long ndy=aPos.Y()-aPnt2.Y();
+                    bPnt2=true;
+                    double nXFact=0; if (!bVLin) nXFact=static_cast<double>(ndx)/static_cast<double>(ndx0);
+                    double nYFact=0; if (!bHLin) nYFact=static_cast<double>(ndy)/static_cast<double>(ndy0);
+                    bool bHor=bHLin || (!bVLin && (nXFact>nYFact) ==bBigOrtho);
+                    bool bVer=bVLin || (!bHLin && (nXFact<=nYFact)==bBigOrtho);
+                    if (bHor) ndy=long(ndy0*nXFact);
+                    if (bVer) ndx=long(ndx0*nYFact);
+                    aNewPos2=aPnt2;
+                    aNewPos2.AdjustX(ndx );
+                    aNewPos2.AdjustY(ndy );
+                }
+            }
+            if (bPnt1 && bPnt2) { // both alternatives exist (and compete)
+                BigInt nX1(aNewPos1.X()-aPos.X()); nX1*=nX1;
+                BigInt nY1(aNewPos1.Y()-aPos.Y()); nY1*=nY1;
+                BigInt nX2(aNewPos2.X()-aPos.X()); nX2*=nX2;
+                BigInt nY2(aNewPos2.Y()-aPos.Y()); nY2*=nY2;
+                nX1+=nY1; // correction distance to square
+                nX2+=nY2; // correction distance to square
+                // let the alternative that allows fewer correction win
+                if (nX1<nX2) bPnt2=false; else bPnt1=false;
+            }
+            if (bPnt1) rDrag.SetNow(aNewPos1);
+            if (bPnt2) rDrag.SetNow(aNewPos2);
+        }
+        rDrag.SetActionRect(tools::Rectangle(rDrag.GetNow(),rDrag.GetNow()));
+
+        // specially for IBM: Eliminate points if both adjoining lines form near 180 degrees angle anyway
+        if (!bControl && rDrag.GetView()!=nullptr && rDrag.GetView()->IsEliminatePolyPoints() &&
+            !bBegPnt && !bEndPnt && !bPrevIsControl && !bNextIsControl)
+        {
+            Point aPt(mpSdrPathDragData->aXP[nNextPnt]);
+            aPt-=rDrag.GetNow();
+            long nAngle1=GetAngle(aPt);
+            aPt=rDrag.GetNow();
+            aPt-=mpSdrPathDragData->aXP[nPrevPnt];
+            long nAngle2=GetAngle(aPt);
+            long nDiff=nAngle1-nAngle2;
+            nDiff=std::abs(nDiff);
+            mpSdrPathDragData->bEliminate=nDiff<=rDrag.GetView()->GetEliminatePolyPointLimitAngle();
+            if (mpSdrPathDragData->bEliminate) { // adapt position, Smooth is true for the ends
+                aPt=mpSdrPathDragData->aXP[nNextPnt];
+                aPt+=mpSdrPathDragData->aXP[nPrevPnt];
+                aPt/=2;
+                rDrag.SetNow(aPt);
+            }
+        }
+
+        // we dragged by this distance
+        Point aDiff(rDrag.GetNow()); aDiff-=mpSdrPathDragData->aXP[nPnt];
+
+        /* There are 8 possible cases:
+              X      1. A control point neither on the left nor on the right.
+           o--X--o   2. There are control points on the left and the right, we are dragging a support point.
+           o--X      3. There is a control point on the left, we are dragging a support point.
+              X--o   4. There is a control point on the right, we are dragging a support point.
+           x--O--o   5. There are control points on the left and the right, we are dragging the left one.
+           x--O      6. There is a control point on the left, we are dragging it.
+           o--O--x   7. There are control points on the left and the right, we are dragging the right one.
+              O--x   8. There is a control point on the right, we are dragging it.
+           Note: modifying a line (not a curve!) might create a curve on the other end of the line
+           if Smooth is set there (with control points aligned to line).
+        */
+
+        mpSdrPathDragData->aXP[nPnt]+=aDiff;
+
+        // now check symmetric plus handles
+        if (bControl) { // cases 5,6,7,8
+            sal_uInt16   nSt; // the associated support point
+            sal_uInt16   nFix;  // the opposing control point
+            if (bIsNextControl) { // if the next one is a control point, the on before has to be a support point
+                nSt=nPrevPnt;
+                nFix=nPrevPrevPnt;
+            } else {
+                nSt=nNextPnt;
+                nFix=nNextNextPnt;
+            }
+            if (mpSdrPathDragData->aXP.IsSmooth(nSt)) {
+                mpSdrPathDragData->aXP.CalcSmoothJoin(nSt,nPnt,nFix);
+            }
+        }
+
+        if (!bControl) { // Cases 1,2,3,4. In case 1, nothing happens; in cases 3 and 4, there is more following below.
+            // move both control points
+            if (bPrevIsControl) mpSdrPathDragData->aXP[nPrevPnt]+=aDiff;
+            if (bNextIsControl) mpSdrPathDragData->aXP[nNextPnt]+=aDiff;
+            // align control point to line, if appropriate
+            if (mpSdrPathDragData->aXP.IsSmooth(nPnt)) {
+                if (bPrevIsControl && !bNextIsControl && !bEndPnt) { // case 3
+                    mpSdrPathDragData->aXP.CalcSmoothJoin(nPnt,nNextPnt,nPrevPnt);
+                }
+                if (bNextIsControl && !bPrevIsControl && !bBegPnt) { // case 4
+                    mpSdrPathDragData->aXP.CalcSmoothJoin(nPnt,nPrevPnt,nNextPnt);
+                }
+            }
+            // Now check the other ends of the line (nPnt+-1). If there is a
+            // curve (IsControl(nPnt+-2)) with SmoothJoin (nPnt+-1), the
+            // associated control point (nPnt+-2) has to be adapted.
+            if (!bBegPnt && !bPrevIsControl && !bPrevIsBegPnt && mpSdrPathDragData->aXP.IsSmooth(nPrevPnt)) {
+                if (mpSdrPathDragData->aXP.IsControl(nPrevPrevPnt)) {
+                    mpSdrPathDragData->aXP.CalcSmoothJoin(nPrevPnt,nPnt,nPrevPrevPnt);
+                }
+            }
+            if (!bEndPnt && !bNextIsControl && !bNextIsEndPnt && mpSdrPathDragData->aXP.IsSmooth(nNextPnt)) {
+                if (mpSdrPathDragData->aXP.IsControl(nNextNextPnt)) {
+                    mpSdrPathDragData->aXP.CalcSmoothJoin(nNextPnt,nPnt,nNextNextPnt);
+                }
+            }
+        }
+    }
+
+    return true;
+}
+
+bool ImpPathForDragAndCreate::endPathDrag(SdrDragStat const & rDrag)
+{
+    Point aLinePt1;
+    Point aLinePt2;
+    bool bLineGlueMirror(OBJ_LINE == meObjectKind);
+    if (bLineGlueMirror) {
+        XPolygon& rXP=aPathPolygon[0];
+        aLinePt1=rXP[0];
+        aLinePt2=rXP[1];
+    }
+
+    if(!mpSdrPathDragData || !mpSdrPathDragData->bValid)
+    {
+        OSL_FAIL("ImpPathForDragAndCreate::MovDrag(): ImpSdrPathDragData is invalid.");
+        return false;
+    }
+
+    if(mpSdrPathDragData->IsMultiPointDrag())
+    {
+        aPathPolygon = mpSdrPathDragData->maMove;
+    }
+    else
+    {
+        const SdrHdl* pHdl=rDrag.GetHdl();
+
+        // reference the polygon
+        XPolygon& rXP=aPathPolygon[static_cast<sal_uInt16>(pHdl->GetPolyNum())];
+
+        // the 5 points that might have changed
+        if (!mpSdrPathDragData->bPrevIsBegPnt) rXP[mpSdrPathDragData->nPrevPrevPnt0]=mpSdrPathDragData->aXP[mpSdrPathDragData->nPrevPrevPnt];
+        if (!mpSdrPathDragData->bNextIsEndPnt) rXP[mpSdrPathDragData->nNextNextPnt0]=mpSdrPathDragData->aXP[mpSdrPathDragData->nNextNextPnt];
+        if (!mpSdrPathDragData->bBegPnt)       rXP[mpSdrPathDragData->nPrevPnt0]    =mpSdrPathDragData->aXP[mpSdrPathDragData->nPrevPnt];
+        if (!mpSdrPathDragData->bEndPnt)       rXP[mpSdrPathDragData->nNextPnt0]    =mpSdrPathDragData->aXP[mpSdrPathDragData->nNextPnt];
+        rXP[mpSdrPathDragData->nPnt0]        =mpSdrPathDragData->aXP[mpSdrPathDragData->nPnt];
+
+        // for closed objects: last point has to be equal to first point
+        if (mpSdrPathDragData->bClosed) rXP[rXP.GetPointCount()-1]=rXP[0];
+
+        if (mpSdrPathDragData->bEliminate)
+        {
+            basegfx::B2DPolyPolygon aTempPolyPolygon(aPathPolygon.getB2DPolyPolygon());
+            sal_uInt32 nPoly,nPnt;
+
+            if(PolyPolygonEditor::GetRelativePolyPoint(aTempPolyPolygon, rDrag.GetHdl()->GetSourceHdlNum(), nPoly, nPnt))
+            {
+                basegfx::B2DPolygon aCandidate(aTempPolyPolygon.getB2DPolygon(nPoly));
+                aCandidate.remove(nPnt);
+
+                if(aCandidate.count() < 2)
+                {
+                    aTempPolyPolygon.remove(nPoly);
+                }
+                else
+                {
+                    aTempPolyPolygon.setB2DPolygon(nPoly, aCandidate);
+                }
+            }
+
+            aPathPolygon = XPolyPolygon(aTempPolyPolygon);
+        }
+
+        // adapt angle for text beneath a simple line
+        if (bLineGlueMirror)
+        {
+            Point aLinePt1_(aPathPolygon[0][0]);
+            Point aLinePt2_(aPathPolygon[0][1]);
+            bool bXMirr=(aLinePt1_.X()>aLinePt2_.X())!=(aLinePt1.X()>aLinePt2.X());
+            bool bYMirr=(aLinePt1_.Y()>aLinePt2_.Y())!=(aLinePt1.Y()>aLinePt2.Y());
+            if (bXMirr || bYMirr) {
+                Point aRef1(mrSdrPathObject.GetSnapRect().Center());
+                if (bXMirr) {
+                    Point aRef2(aRef1);
+                    aRef2.AdjustY( 1 );
+                    mrSdrPathObject.NbcMirrorGluePoints(aRef1,aRef2);
+                }
+                if (bYMirr) {
+                    Point aRef2(aRef1);
+                    aRef2.AdjustX( 1 );
+                    mrSdrPathObject.NbcMirrorGluePoints(aRef1,aRef2);
+                }
+            }
+        }
+    }
+
+    mpSdrPathDragData.reset();
+
+    return true;
+}
+
+OUString ImpPathForDragAndCreate::getSpecialDragComment(const SdrDragStat& rDrag) const
+{
+    OUString aStr;
+    const SdrHdl* pHdl = rDrag.GetHdl();
+    const bool bCreateComment(rDrag.GetView() && &mrSdrPathObject == rDrag.GetView()->GetCreateObj());
+
+    if(bCreateComment && rDrag.GetUser())
+    {
+        // #i103058# re-add old creation comment mode
+        const ImpPathCreateUser* pU = static_cast<const ImpPathCreateUser*>(rDrag.GetUser());
+        const SdrObjKind eOriginalKind(meObjectKind);
+        mrSdrPathObject.meKind = pU->eCurrentKind;
+        aStr = mrSdrPathObject.ImpGetDescriptionStr(STR_ViewCreateObj);
+        mrSdrPathObject.meKind = eOriginalKind;
+
+        Point aPrev(rDrag.GetPrev());
+        Point aNow(rDrag.GetNow());
+
+        if(pU->bLine)
+            aNow = pU->aLineEnd;
+
+        aNow -= aPrev;
+        aStr += " (";
+
+        if(pU->bCircle)
+        {
+            aStr += SdrModel::GetAngleString(std::abs(pU->nCircRelAngle))
+                    + " r="
+                    + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(pU->nCircRadius, true);
+        }
+
+        aStr += "dx="
+                + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(aNow.X(), true)
+                + " dy="
+                + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(aNow.Y(), true);
+
+        if(!IsFreeHand(meObjectKind))
+        {
+            sal_Int32 nLen(GetLen(aNow));
+            sal_Int32 nAngle(GetAngle(aNow));
+            aStr += "  l="
+                    + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(nLen, true)
+                    + " "
+                    + SdrModel::GetAngleString(nAngle);
+        }
+
+        aStr += ")";
+    }
+    else if(!pHdl)
+    {
+        // #i103058# fallback when no model and/or Handle, both needed
+        // for else-path
+        aStr = mrSdrPathObject.ImpGetDescriptionStr(STR_DragPathObj);
+    }
+    else
+    {
+        // #i103058# standard for modification; model and handle needed
+        ImpSdrPathDragData* pDragData = mpSdrPathDragData.get();
+
+        if(!pDragData)
+        {
+            // getSpecialDragComment is also used from create, so fallback to GetUser()
+            // when mpSdrPathDragData is not set
+            pDragData = static_cast<ImpSdrPathDragData*>(rDrag.GetUser());
+        }
+
+        if(!pDragData)
+        {
+            OSL_FAIL("ImpPathForDragAndCreate::MovDrag(): ImpSdrPathDragData is invalid.");
+            return OUString();
+        }
+
+        if(!pDragData->IsMultiPointDrag() && pDragData->bEliminate)
+        {
+            // point of ...
+            aStr = mrSdrPathObject.ImpGetDescriptionStr(STR_ViewMarkedPoint);
+
+            // delete %O
+            OUString aStr2(SvxResId(STR_EditDelete));
+
+            // UNICODE: delete point of ...
+            aStr2 = aStr2.replaceFirst("%1", aStr);
+
+            return aStr2;
+        }
+
+        // dx=0.00 dy=0.00                -- both sides bezier
+        // dx=0.00 dy=0.00  l=0.00 0.00\302\260  -- one bezier/lever on one side, a start, or an ending
+        // dx=0.00 dy=0.00  l=0.00 0.00\302\260 / l=0.00 0.00\302\260 -- in between
+        Point aBeg(rDrag.GetStart());
+        Point aNow(rDrag.GetNow());
+
+        aStr.clear();
+        aStr += "dx="
+                + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(aNow.X() - aBeg.X(), true)
+                + " dy="
+                + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(aNow.Y() - aBeg.Y(), true);
+
+        if(!pDragData->IsMultiPointDrag())
+        {
+            sal_uInt16 nPntNum(static_cast<sal_uInt16>(pHdl->GetPointNum()));
+            const XPolygon& rXPoly = aPathPolygon[static_cast<sal_uInt16>(rDrag.GetHdl()->GetPolyNum())];
+            sal_uInt16 nPointCount(rXPoly.GetPointCount());
+            bool bClose(IsClosed(meObjectKind));
+
+            if(bClose)
+                nPointCount--;
+
+            if(pHdl->IsPlusHdl())
+            {
+                // lever
+                sal_uInt16 nRef(nPntNum);
+
+                if(rXPoly.IsControl(nPntNum + 1))
+                    nRef--;
+                else
+                    nRef++;
+
+                aNow -= rXPoly[nRef];
+
+                sal_Int32 nLen(GetLen(aNow));
+                sal_Int32 nAngle(GetAngle(aNow));
+                aStr += "  l="
+                        + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(nLen, true)
+                        + " "
+                        + SdrModel::GetAngleString(nAngle);
+            }
+            else if(nPointCount > 1)
+            {
+                sal_uInt16 nPntMax(nPointCount - 1);
+                bool bIsClosed(IsClosed(meObjectKind));
+                bool bPt1(nPntNum > 0);
+                bool bPt2(nPntNum < nPntMax);
+
+                if(bIsClosed && nPointCount > 2)
+                {
+                    bPt1 = true;
+                    bPt2 = true;
+                }
+
+                sal_uInt16 nPt1,nPt2;
+
+                if(nPntNum > 0)
+                    nPt1 = nPntNum - 1;
+                else
+                    nPt1 = nPntMax;
+
+                if(nPntNum < nPntMax)
+                    nPt2 = nPntNum + 1;
+                else
+                    nPt2 = 0;
+
+                if(bPt1 && rXPoly.IsControl(nPt1))
+                    bPt1 = false; // don't display
+
+                if(bPt2 && rXPoly.IsControl(nPt2))
+                    bPt2 = false; // of bezier data
+
+                if(bPt1)
+                {
+                    Point aPt(aNow);
+                    aPt -= rXPoly[nPt1];
+
+                    sal_Int32 nLen(GetLen(aPt));
+                    sal_Int32 nAngle(GetAngle(aPt));
+                    aStr += "  l="
+                            + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(nLen, true)
+                            + " "
+                            + SdrModel::GetAngleString(nAngle);
+                }
+
+                if(bPt2)
+                {
+                    if(bPt1)
+                        aStr += " / ";
+                    else
+                        aStr += "  ";
+
+                    Point aPt(aNow);
+                    aPt -= rXPoly[nPt2];
+
+                    sal_Int32 nLen(GetLen(aPt));
+                    sal_Int32 nAngle(GetAngle(aPt));
+                    aStr += "l="
+                            + mrSdrPathObject.getSdrModelFromSdrObject().GetMetricString(nLen, true)
+                            + " "
+                            + SdrModel::GetAngleString(nAngle);
+                }
+            }
+        }
+    }
+
+    return aStr;
+}
+
+basegfx::B2DPolyPolygon ImpPathForDragAndCreate::getSpecialDragPoly(const SdrDragStat& rDrag) const
+{
+    if(!mpSdrPathDragData || !mpSdrPathDragData->bValid)
+    {
+        OSL_FAIL("ImpPathForDragAndCreate::MovDrag(): ImpSdrPathDragData is invalid.");
+        return basegfx::B2DPolyPolygon();
+    }
+
+    XPolyPolygon aRetval;
+
+    if(mpSdrPathDragData->IsMultiPointDrag())
+    {
+        aRetval.Insert(mpSdrPathDragData->maMove);
+    }
+    else
+    {
+        const XPolygon& rXP=aPathPolygon[static_cast<sal_uInt16>(rDrag.GetHdl()->GetPolyNum())];
+        if (rXP.GetPointCount()<=2) {
+            XPolygon aXPoly(rXP);
+            aXPoly[static_cast<sal_uInt16>(rDrag.GetHdl()->GetPointNum())]=rDrag.GetNow();
+            aRetval.Insert(std::move(aXPoly));
+            return aRetval.getB2DPolyPolygon();
+        }
+        // copy certain data locally to use less code and have faster access times
+        bool bClosed           =mpSdrPathDragData->bClosed       ; // closed object?
+        sal_uInt16 nPointCount = mpSdrPathDragData->nPointCount; // number of points
+        sal_uInt16   nPnt          =mpSdrPathDragData->nPnt          ; // number of points in the polygon
+        bool bBegPnt           =mpSdrPathDragData->bBegPnt       ; // dragged point is the first point of a Polyline
+        bool bEndPnt           =mpSdrPathDragData->bEndPnt       ; // dragged point is the last point of a Polyline
+        sal_uInt16   nPrevPnt      =mpSdrPathDragData->nPrevPnt      ; // index of the previous point
+        sal_uInt16   nNextPnt      =mpSdrPathDragData->nNextPnt      ; // index of the next point
+        bool bPrevIsBegPnt     =mpSdrPathDragData->bPrevIsBegPnt ; // previous point is first point of a Polyline
+        bool bNextIsEndPnt     =mpSdrPathDragData->bNextIsEndPnt ; // next point is last point of a Polyline
+        sal_uInt16   nPrevPrevPnt  =mpSdrPathDragData->nPrevPrevPnt  ; // index of the point before the previous point
+        sal_uInt16   nNextNextPnt  =mpSdrPathDragData->nNextNextPnt  ; // index of the point after the last point
+        bool bControl          =mpSdrPathDragData->bControl      ; // point is a control point
+        bool bIsNextControl    =mpSdrPathDragData->bIsNextControl; //point is a control point after a support point
+        bool bPrevIsControl    =mpSdrPathDragData->bPrevIsControl; // if nPnt is a support point: there's a control point before
+        bool bNextIsControl    =mpSdrPathDragData->bNextIsControl; // if nPnt is a support point: there's a control point after
+        XPolygon aXPoly(mpSdrPathDragData->aXP);
+        XPolygon aLine1(2);
+        XPolygon aLine2(2);
+        XPolygon aLine3(2);
+        XPolygon aLine4(2);
+        if (bControl) {
+            aLine1[1]=mpSdrPathDragData->aXP[nPnt];
+            if (bIsNextControl) { // is this a control point after the support point?
+                aLine1[0]=mpSdrPathDragData->aXP[nPrevPnt];
+                aLine2[0]=mpSdrPathDragData->aXP[nNextNextPnt];
+                aLine2[1]=mpSdrPathDragData->aXP[nNextPnt];
+                if (mpSdrPathDragData->aXP.IsSmooth(nPrevPnt) && !bPrevIsBegPnt && mpSdrPathDragData->aXP.IsControl(nPrevPrevPnt)) {
+                    aXPoly.Insert(0,rXP[mpSdrPathDragData->nPrevPrevPnt0-1],PolyFlags::Control);
+                    aXPoly.Insert(0,rXP[mpSdrPathDragData->nPrevPrevPnt0-2],PolyFlags::Normal);
+                    // leverage lines for the opposing curve segment
+                    aLine3[0]=mpSdrPathDragData->aXP[nPrevPnt];
+                    aLine3[1]=mpSdrPathDragData->aXP[nPrevPrevPnt];
+                    aLine4[0]=rXP[mpSdrPathDragData->nPrevPrevPnt0-2];
+                    aLine4[1]=rXP[mpSdrPathDragData->nPrevPrevPnt0-1];
+                } else {
+                    aXPoly.Remove(0,1);
+                }
+            } else { // else this is a control point before a support point
+                aLine1[0]=mpSdrPathDragData->aXP[nNextPnt];
+                aLine2[0]=mpSdrPathDragData->aXP[nPrevPrevPnt];
+                aLine2[1]=mpSdrPathDragData->aXP[nPrevPnt];
+                if (mpSdrPathDragData->aXP.IsSmooth(nNextPnt) && !bNextIsEndPnt && mpSdrPathDragData->aXP.IsControl(nNextNextPnt)) {
+                    aXPoly.Insert(XPOLY_APPEND,rXP[mpSdrPathDragData->nNextNextPnt0+1],PolyFlags::Control);
+                    aXPoly.Insert(XPOLY_APPEND,rXP[mpSdrPathDragData->nNextNextPnt0+2],PolyFlags::Normal);
+                    // leverage lines for the opposing curve segment
+                    aLine3[0]=mpSdrPathDragData->aXP[nNextPnt];
+                    aLine3[1]=mpSdrPathDragData->aXP[nNextNextPnt];
+                    aLine4[0]=rXP[mpSdrPathDragData->nNextNextPnt0+2];
+                    aLine4[1]=rXP[mpSdrPathDragData->nNextNextPnt0+1];
+                } else {
+                    aXPoly.Remove(aXPoly.GetPointCount()-1,1);
+                }
+            }
+        } else { // else is not a control point
+            if (mpSdrPathDragData->bEliminate) {
+                aXPoly.Remove(2,1);
+            }
+            if (bPrevIsControl) aXPoly.Insert(0,rXP[mpSdrPathDragData->nPrevPrevPnt0-1],PolyFlags::Normal);
+            else if (!bBegPnt && !bPrevIsBegPnt && mpSdrPathDragData->aXP.IsControl(nPrevPrevPnt)) {
+                aXPoly.Insert(0,rXP[mpSdrPathDragData->nPrevPrevPnt0-1],PolyFlags::Control);
+                aXPoly.Insert(0,rXP[mpSdrPathDragData->nPrevPrevPnt0-2],PolyFlags::Normal);
+            } else {
+                aXPoly.Remove(0,1);
+                if (bBegPnt) aXPoly.Remove(0,1);
+            }
+            if (bNextIsControl) aXPoly.Insert(XPOLY_APPEND,rXP[mpSdrPathDragData->nNextNextPnt0+1],PolyFlags::Normal);
+            else if (!bEndPnt && !bNextIsEndPnt && mpSdrPathDragData->aXP.IsControl(nNextNextPnt)) {
+                aXPoly.Insert(XPOLY_APPEND,rXP[mpSdrPathDragData->nNextNextPnt0+1],PolyFlags::Control);
+                aXPoly.Insert(XPOLY_APPEND,rXP[mpSdrPathDragData->nNextNextPnt0+2],PolyFlags::Normal);
+            } else {
+                aXPoly.Remove(aXPoly.GetPointCount()-1,1);
+                if (bEndPnt) aXPoly.Remove(aXPoly.GetPointCount()-1,1);
+            }
+            if (bClosed) { // "pear problem": 2 lines, 1 curve, everything smoothed, a point between both lines is dragged
+                if (aXPoly.GetPointCount()>nPointCount && aXPoly.IsControl(1)) {
+                    sal_uInt16 a=aXPoly.GetPointCount();
+                    aXPoly[a-2]=aXPoly[2]; aXPoly.SetFlags(a-2,aXPoly.GetFlags(2));
+                    aXPoly[a-1]=aXPoly[3]; aXPoly.SetFlags(a-1,aXPoly.GetFlags(3));
+                    aXPoly.Remove(0,3);
+                }
+            }
+        }
+        aRetval.Insert(std::move(aXPoly));
+        if (aLine1.GetPointCount()>1) aRetval.Insert(std::move(aLine1));
+        if (aLine2.GetPointCount()>1) aRetval.Insert(std::move(aLine2));
+        if (aLine3.GetPointCount()>1) aRetval.Insert(std::move(aLine3));
+        if (aLine4.GetPointCount()>1) aRetval.Insert(std::move(aLine4));
+    }
+
+    return aRetval.getB2DPolyPolygon();
+}
+
+void ImpPathForDragAndCreate::BegCreate(SdrDragStat& rStat)
+{
+    bool bFreeHand(IsFreeHand(meObjectKind));
+    rStat.SetNoSnap(bFreeHand);
+    rStat.SetOrtho8Possible();
+    aPathPolygon.Clear();
+    mbCreating=true;
+    bool bMakeStartPoint = true;
+    SdrView* pView=rStat.GetView();
+    if (pView!=nullptr && pView->IsUseIncompatiblePathCreateInterface() &&
+        (meObjectKind==OBJ_POLY || meObjectKind==OBJ_PLIN || meObjectKind==OBJ_PATHLINE || meObjectKind==OBJ_PATHFILL)) {
+        bMakeStartPoint = false;
+    }
+    aPathPolygon.Insert(XPolygon());
+    aPathPolygon[0][0]=rStat.GetStart();
+    if (bMakeStartPoint) {
+        aPathPolygon[0][1]=rStat.GetNow();
+    }
+    std::unique_ptr<ImpPathCreateUser> pU(new ImpPathCreateUser);
+    pU->eStartKind=meObjectKind;
+    pU->eCurrentKind=meObjectKind;
+    rStat.SetUser(std::move(pU));
+}
+
+bool ImpPathForDragAndCreate::MovCreate(SdrDragStat& rStat)
+{
+    ImpPathCreateUser* pU=static_cast<ImpPathCreateUser*>(rStat.GetUser());
+    SdrView* pView=rStat.GetView();
+    XPolygon& rXPoly=aPathPolygon[aPathPolygon.Count()-1];
+    if (pView!=nullptr && pView->IsCreateMode()) {
+        // switch to different CreateTool, if appropriate
+        sal_uInt16 nIdent;
+        SdrInventor nInvent;
+        pView->TakeCurrentObj(nIdent,nInvent);
+        if (nInvent==SdrInventor::Default && pU->eCurrentKind!=static_cast<SdrObjKind>(nIdent)) {
+            SdrObjKind eNewKind=static_cast<SdrObjKind>(nIdent);
+            switch (eNewKind) {
+                case OBJ_CARC:
+                case OBJ_CIRC:
+                case OBJ_CCUT:
+                case OBJ_SECT:
+                    eNewKind=OBJ_CARC;
+                    [[fallthrough]];
+                case OBJ_RECT:
+                case OBJ_LINE:
+                case OBJ_PLIN:
+                case OBJ_POLY:
+                case OBJ_PATHLINE:
+                case OBJ_PATHFILL:
+                case OBJ_FREELINE:
+                case OBJ_FREEFILL:
+                case OBJ_SPLNLINE:
+                case OBJ_SPLNFILL: {
+                    pU->eCurrentKind=eNewKind;
+                    pU->bMixedCreate=true;
+                    pU->nBezierStartPoint=rXPoly.GetPointCount();
+                    if (pU->nBezierStartPoint>0) pU->nBezierStartPoint--;
+                } break;
+                default: break;
+            } // switch
+        }
+    }
+    sal_uInt16 nCurrentPoint=rXPoly.GetPointCount();
+    if (aPathPolygon.Count()>1 && rStat.IsMouseDown() && nCurrentPoint<2) {
+        rXPoly[0]=rStat.GetPos0();
+        rXPoly[1]=rStat.GetNow();
+        nCurrentPoint=2;
+    }
+    if (nCurrentPoint==0) {
+        rXPoly[0]=rStat.GetPos0();
+    } else nCurrentPoint--;
+    bool bFreeHand=IsFreeHand(pU->eCurrentKind);
+    rStat.SetNoSnap(bFreeHand);
+    rStat.SetOrtho8Possible(pU->eCurrentKind!=OBJ_CARC && pU->eCurrentKind!=OBJ_RECT && (!pU->bMixedCreate || pU->eCurrentKind!=OBJ_LINE));
+    rXPoly[nCurrentPoint]=rStat.GetNow();
+    if (!pU->bMixedCreate && pU->eStartKind==OBJ_LINE && rXPoly.GetPointCount()>=1) {
+        Point aPt(rStat.GetStart());
+        if (pView!=nullptr && pView->IsCreate1stPointAsCenter()) {
+            aPt+=aPt;
+            aPt-=rStat.GetNow();
+        }
+        rXPoly[0]=aPt;
+    }
+    OutputDevice* pOut=pView==nullptr ? nullptr : pView->GetFirstOutputDevice();
+    if (bFreeHand) {
+        if (pU->nBezierStartPoint>nCurrentPoint) pU->nBezierStartPoint=nCurrentPoint;
+        if (rStat.IsMouseDown() && nCurrentPoint>0) {
+            // don't allow two consecutive points to occupy too similar positions
+            long nMinDist=1;
+            if (pView!=nullptr) nMinDist=pView->GetFreeHandMinDistPix();
+            if (pOut!=nullptr) nMinDist=pOut->PixelToLogic(Size(nMinDist,0)).Width();
+            if (nMinDist<1) nMinDist=1;
+
+            Point aPt0(rXPoly[nCurrentPoint-1]);
+            Point aPt1(rStat.GetNow());
+            long dx=aPt0.X()-aPt1.X(); if (dx<0) dx=-dx;
+            long dy=aPt0.Y()-aPt1.Y(); if (dy<0) dy=-dy;
+            if (dx<nMinDist && dy<nMinDist) return false;
+
+            // TODO: the following is copied from EndCreate (with a few smaller modifications)
+            // and should be combined into a method with the code there.
+
+            if (nCurrentPoint-pU->nBezierStartPoint>=3 && ((nCurrentPoint-pU->nBezierStartPoint)%3)==0) {
+                rXPoly.PointsToBezier(nCurrentPoint-3);
+                rXPoly.SetFlags(nCurrentPoint-1,PolyFlags::Control);
+                rXPoly.SetFlags(nCurrentPoint-2,PolyFlags::Control);
+
+                if (nCurrentPoint>=6 && rXPoly.IsControl(nCurrentPoint-4)) {
+                    rXPoly.CalcTangent(nCurrentPoint-3,nCurrentPoint-4,nCurrentPoint-2);
+                    rXPoly.SetFlags(nCurrentPoint-3,PolyFlags::Smooth);
+                }
+            }
+            rXPoly[nCurrentPoint+1]=rStat.GetNow();
+            rStat.NextPoint();
+        } else {
+            pU->nBezierStartPoint=nCurrentPoint;
+        }
+    }
+
+    pU->ResetFormFlags();
+    if (IsBezier(pU->eCurrentKind)) {
+        if (nCurrentPoint>=2) {
+            pU->CalcBezier(rXPoly[nCurrentPoint-1],rXPoly[nCurrentPoint],rXPoly[nCurrentPoint-1]-rXPoly[nCurrentPoint-2],rStat.IsMouseDown());
+        } else if (pU->bBezHasCtrl0) {
+            pU->CalcBezier(rXPoly[nCurrentPoint-1],rXPoly[nCurrentPoint],pU->aBezControl0-rXPoly[nCurrentPoint-1],rStat.IsMouseDown());
+        }
+    }
+    if (pU->eCurrentKind==OBJ_CARC && nCurrentPoint>=2) {
+        pU->CalcCircle(rXPoly[nCurrentPoint-1],rXPoly[nCurrentPoint],rXPoly[nCurrentPoint-1]-rXPoly[nCurrentPoint-2],pView);
+    }
+    if (pU->eCurrentKind==OBJ_LINE && nCurrentPoint>=2) {
+        pU->CalcLine(rXPoly[nCurrentPoint-1],rXPoly[nCurrentPoint],rXPoly[nCurrentPoint-1]-rXPoly[nCurrentPoint-2],pView);
+    }
+    if (pU->eCurrentKind==OBJ_RECT && nCurrentPoint>=2) {
+        pU->CalcRect(rXPoly[nCurrentPoint-1],rXPoly[nCurrentPoint],rXPoly[nCurrentPoint-1]-rXPoly[nCurrentPoint-2],pView);
+    }
+
+    return true;
+}
+
+bool ImpPathForDragAndCreate::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    ImpPathCreateUser* pU=static_cast<ImpPathCreateUser*>(rStat.GetUser());
+    bool bRet = false;
+    SdrView* pView=rStat.GetView();
+    bool bIncomp=pView!=nullptr && pView->IsUseIncompatiblePathCreateInterface();
+    XPolygon& rXPoly=aPathPolygon[aPathPolygon.Count()-1];
+    sal_uInt16 nCurrentPoint=rXPoly.GetPointCount()-1;
+    rXPoly[nCurrentPoint]=rStat.GetNow();
+    if (!pU->bMixedCreate && pU->eStartKind==OBJ_LINE) {
+        if (rStat.GetPointCount()>=2) eCmd=SdrCreateCmd::ForceEnd;
+        bRet = eCmd==SdrCreateCmd::ForceEnd;
+        if (bRet) {
+            mbCreating = false;
+            rStat.SetUser(nullptr);
+        }
+        return bRet;
+    }
+
+    if (!pU->bMixedCreate && IsFreeHand(pU->eStartKind)) {
+        if (rStat.GetPointCount()>=2) eCmd=SdrCreateCmd::ForceEnd;
+        bRet=eCmd==SdrCreateCmd::ForceEnd;
+        if (bRet) {
+            mbCreating=false;
+            rStat.SetUser(nullptr);
+        }
+        return bRet;
+    }
+    if (eCmd==SdrCreateCmd::NextPoint || eCmd==SdrCreateCmd::NextObject) {
+        // don't allow two consecutive points to occupy the same position
+        if (nCurrentPoint==0 || rStat.GetNow()!=rXPoly[nCurrentPoint-1]) {
+            if (bIncomp) {
+                if (pU->nBezierStartPoint>nCurrentPoint) pU->nBezierStartPoint=nCurrentPoint;
+                if (IsBezier(pU->eCurrentKind) && nCurrentPoint-pU->nBezierStartPoint>=3 && ((nCurrentPoint-pU->nBezierStartPoint)%3)==0) {
+                    rXPoly.PointsToBezier(nCurrentPoint-3);
+                    rXPoly.SetFlags(nCurrentPoint-1,PolyFlags::Control);
+                    rXPoly.SetFlags(nCurrentPoint-2,PolyFlags::Control);
+
+                    if (nCurrentPoint>=6 && rXPoly.IsControl(nCurrentPoint-4)) {
+                        rXPoly.CalcTangent(nCurrentPoint-3,nCurrentPoint-4,nCurrentPoint-2);
+                        rXPoly.SetFlags(nCurrentPoint-3,PolyFlags::Smooth);
+                    }
+                }
+            } else {
+                if (nCurrentPoint==1 && IsBezier(pU->eCurrentKind) && !pU->bBezHasCtrl0) {
+                    pU->aBezControl0=rStat.GetNow();
+                    pU->bBezHasCtrl0=true;
+                    nCurrentPoint--;
+                }
+                if (pU->IsFormFlag()) {
+                    sal_uInt16 nPointCount0=rXPoly.GetPointCount();
+                    rXPoly.Remove(nCurrentPoint-1,2); // remove last two points and replace by form
+                    rXPoly.Insert(XPOLY_APPEND,pU->GetFormPoly());
+                    sal_uInt16 nPointCount1=rXPoly.GetPointCount();
+                    for (sal_uInt16 i=nPointCount0+1; i<nPointCount1-1; i++) { // to make BckAction work
+                        if (!rXPoly.IsControl(i)) rStat.NextPoint();
+                    }
+                    nCurrentPoint=rXPoly.GetPointCount()-1;
+                }
+            }
+            nCurrentPoint++;
+            rXPoly[nCurrentPoint]=rStat.GetNow();
+        }
+        if (eCmd==SdrCreateCmd::NextObject) {
+            if (rXPoly.GetPointCount()>=2) {
+                pU->bBezHasCtrl0=false;
+                // only a singular polygon may be opened, so close this
+                rXPoly[nCurrentPoint]=rXPoly[0];
+                XPolygon aXP;
+                aXP[0]=rStat.GetNow();
+                aPathPolygon.Insert(std::move(aXP));
+            }
+        }
+    }
+
+    sal_uInt16 nPolyCount=aPathPolygon.Count();
+    if (nPolyCount!=0) {
+        // delete last point, if necessary
+        if (eCmd==SdrCreateCmd::ForceEnd) {
+            XPolygon& rXP=aPathPolygon[nPolyCount-1];
+            sal_uInt16 nPointCount=rXP.GetPointCount();
+            if (nPointCount>=2) {
+                if (!rXP.IsControl(nPointCount-2)) {
+                    if (rXP[nPointCount-1]==rXP[nPointCount-2]) {
+                        rXP.Remove(nPointCount-1,1);
+                    }
+                } else {
+                    if (rXP[nPointCount-3]==rXP[nPointCount-2]) {
+                        rXP.Remove(nPointCount-3,3);
+                    }
+                }
+            }
+        }
+        for (sal_uInt16 nPolyNum=nPolyCount; nPolyNum>0;) {
+            nPolyNum--;
+            XPolygon& rXP=aPathPolygon[nPolyNum];
+            sal_uInt16 nPointCount=rXP.GetPointCount();
+            // delete polygons with too few points
+            if (nPolyNum<nPolyCount-1 || eCmd==SdrCreateCmd::ForceEnd) {
+                if (nPointCount<2) aPathPolygon.Remove(nPolyNum);
+            }
+        }
+    }
+    pU->ResetFormFlags();
+    bRet=eCmd==SdrCreateCmd::ForceEnd;
+    if (bRet) {
+        mbCreating=false;
+        rStat.SetUser(nullptr);
+    }
+    return bRet;
+}
+
+bool ImpPathForDragAndCreate::BckCreate(SdrDragStat const & rStat)
+{
+    ImpPathCreateUser* pU=static_cast<ImpPathCreateUser*>(rStat.GetUser());
+    if (aPathPolygon.Count()>0) {
+        XPolygon& rXPoly=aPathPolygon[aPathPolygon.Count()-1];
+        sal_uInt16 nCurrentPoint=rXPoly.GetPointCount();
+        if (nCurrentPoint>0) {
+            nCurrentPoint--;
+            // make the last part of a bezier curve a line
+            rXPoly.Remove(nCurrentPoint,1);
+            if (nCurrentPoint>=3 && rXPoly.IsControl(nCurrentPoint-1)) {
+                // there should never be a bezier segment at the end, so this is just in case...
+                rXPoly.Remove(nCurrentPoint-1,1);
+                if (rXPoly.IsControl(nCurrentPoint-2)) rXPoly.Remove(nCurrentPoint-2,1);
+            }
+        }
+        nCurrentPoint=rXPoly.GetPointCount();
+        if (nCurrentPoint>=4) { // no bezier segment at the end
+            nCurrentPoint--;
+            if (rXPoly.IsControl(nCurrentPoint-1)) {
+                rXPoly.Remove(nCurrentPoint-1,1);
+                if (rXPoly.IsControl(nCurrentPoint-2)) rXPoly.Remove(nCurrentPoint-2,1);
+            }
+        }
+        if (rXPoly.GetPointCount()<2) {
+            aPathPolygon.Remove(aPathPolygon.Count()-1);
+        }
+        if (aPathPolygon.Count()>0) {
+            XPolygon& rLocalXPoly=aPathPolygon[aPathPolygon.Count()-1];
+            sal_uInt16 nLocalCurrentPoint=rLocalXPoly.GetPointCount();
+            if (nLocalCurrentPoint>0) {
+                nLocalCurrentPoint--;
+                rLocalXPoly[nLocalCurrentPoint]=rStat.GetNow();
+            }
+        }
+    }
+    pU->ResetFormFlags();
+    return aPathPolygon.Count()!=0;
+}
+
+void ImpPathForDragAndCreate::BrkCreate(SdrDragStat& rStat)
+{
+    aPathPolygon.Clear();
+    mbCreating=false;
+    rStat.SetUser(nullptr);
+}
+
+basegfx::B2DPolyPolygon ImpPathForDragAndCreate::TakeObjectPolyPolygon(const SdrDragStat& rDrag) const
+{
+    basegfx::B2DPolyPolygon aRetval(aPathPolygon.getB2DPolyPolygon());
+    SdrView* pView = rDrag.GetView();
+
+    if(pView && pView->IsUseIncompatiblePathCreateInterface())
+        return aRetval;
+
+    ImpPathCreateUser* pU = static_cast<ImpPathCreateUser*>(rDrag.GetUser());
+    basegfx::B2DPolygon aNewPolygon(aRetval.count() ? aRetval.getB2DPolygon(aRetval.count() - 1) : basegfx::B2DPolygon());
+
+    if(pU->IsFormFlag() && aNewPolygon.count() > 1)
+    {
+        // remove last segment and replace with current
+        // do not forget to rescue the previous control point which will be lost when
+        // the point it's associated with is removed
+        const sal_uInt32 nChangeIndex(aNewPolygon.count() - 2);
+        const basegfx::B2DPoint aSavedPrevCtrlPoint(aNewPolygon.getPrevControlPoint(nChangeIndex));
+
+        aNewPolygon.remove(nChangeIndex, 2);
+        aNewPolygon.append(pU->GetFormPoly().getB2DPolygon());
+
+        if(nChangeIndex < aNewPolygon.count())
+        {
+            // if really something was added, set the saved previous control point to the
+            // point where it belongs
+            aNewPolygon.setPrevControlPoint(nChangeIndex, aSavedPrevCtrlPoint);
+        }
+    }
+
+    if(aRetval.count())
+    {
+        aRetval.setB2DPolygon(aRetval.count() - 1, aNewPolygon);
+    }
+    else
+    {
+        aRetval.append(aNewPolygon);
+    }
+
+    return aRetval;
+}
+
+basegfx::B2DPolyPolygon ImpPathForDragAndCreate::TakeDragPolyPolygon(const SdrDragStat& rDrag)
+{
+    basegfx::B2DPolyPolygon aRetval;
+    SdrView* pView = rDrag.GetView();
+
+    if(pView && pView->IsUseIncompatiblePathCreateInterface())
+        return aRetval;
+
+    const ImpPathCreateUser* pU = static_cast<const ImpPathCreateUser*>(rDrag.GetUser());
+
+    if(pU && pU->bBezier && rDrag.IsMouseDown())
+    {
+        // no more XOR, no need for complicated helplines
+        basegfx::B2DPolygon aHelpline;
+        aHelpline.append(basegfx::B2DPoint(pU->aBezCtrl2.X(), pU->aBezCtrl2.Y()));
+        aHelpline.append(basegfx::B2DPoint(pU->aBezEnd.X(), pU->aBezEnd.Y()));
+        aRetval.append(aHelpline);
+    }
+
+    return aRetval;
+}
+
+PointerStyle ImpPathForDragAndCreate::GetCreatePointer() const
+{
+    switch (meObjectKind) {
+        case OBJ_LINE    : return PointerStyle::DrawLine;
+        case OBJ_POLY    : return PointerStyle::DrawPolygon;
+        case OBJ_PLIN    : return PointerStyle::DrawPolygon;
+        case OBJ_PATHLINE: return PointerStyle::DrawBezier;
+        case OBJ_PATHFILL: return PointerStyle::DrawBezier;
+        case OBJ_FREELINE: return PointerStyle::DrawFreehand;
+        case OBJ_FREEFILL: return PointerStyle::DrawFreehand;
+        case OBJ_SPLNLINE: return PointerStyle::DrawFreehand;
+        case OBJ_SPLNFILL: return PointerStyle::DrawFreehand;
+        case OBJ_PATHPOLY: return PointerStyle::DrawPolygon;
+        case OBJ_PATHPLIN: return PointerStyle::DrawPolygon;
+        default: break;
+    } // switch
+    return PointerStyle::Cross;
+}
+
+SdrPathObjGeoData::SdrPathObjGeoData()
+    : meKind(OBJ_NONE)
+{
+}
+
+SdrPathObjGeoData::~SdrPathObjGeoData()
+{
+}
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrPathObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrPathObj>(*this);
+}
+
+
+SdrPathObj::SdrPathObj(
+    SdrModel& rSdrModel,
+    SdrObjKind eNewKind)
+:   SdrTextObj(rSdrModel),
+    meKind(eNewKind)
+{
+    bClosedObj = IsClosed();
+}
+
+SdrPathObj::SdrPathObj(
+    SdrModel& rSdrModel,
+    SdrObjKind eNewKind,
+    const basegfx::B2DPolyPolygon& rPathPoly)
+:   SdrTextObj(rSdrModel),
+    maPathPolygon(rPathPoly),
+    meKind(eNewKind)
+{
+    bClosedObj = IsClosed();
+    ImpForceKind();
+}
+
+SdrPathObj::~SdrPathObj() = default;
+
+static bool lcl_ImpIsLine(const basegfx::B2DPolyPolygon& rPolyPolygon)
+{
+    return (1 == rPolyPolygon.count() && 2 == rPolyPolygon.getB2DPolygon(0).count());
+}
+
+static tools::Rectangle lcl_ImpGetBoundRect(const basegfx::B2DPolyPolygon& rPolyPolygon)
+{
+    basegfx::B2DRange aRange(basegfx::utils::getRange(rPolyPolygon));
+
+    if (aRange.isEmpty())
+        return tools::Rectangle();
+
+    return tools::Rectangle(
+        FRound(aRange.getMinX()), FRound(aRange.getMinY()),
+        FRound(aRange.getMaxX()), FRound(aRange.getMaxY()));
+}
+
+void SdrPathObj::ImpForceLineAngle()
+{
+    if(OBJ_LINE != meKind || !lcl_ImpIsLine(GetPathPoly()))
+        return;
+
+    const basegfx::B2DPolygon aPoly(GetPathPoly().getB2DPolygon(0));
+    const basegfx::B2DPoint aB2DPoint0(aPoly.getB2DPoint(0));
+    const basegfx::B2DPoint aB2DPoint1(aPoly.getB2DPoint(1));
+    const Point aPoint0(FRound(aB2DPoint0.getX()), FRound(aB2DPoint0.getY()));
+    const Point aPoint1(FRound(aB2DPoint1.getX()), FRound(aB2DPoint1.getY()));
+    const basegfx::B2DPoint aB2DDelt(aB2DPoint1 - aB2DPoint0);
+    const Point aDelt(FRound(aB2DDelt.getX()), FRound(aB2DDelt.getY()));
+
+    aGeo.nRotationAngle=GetAngle(aDelt);
+    aGeo.nShearAngle=0;
+    aGeo.RecalcSinCos();
+    aGeo.RecalcTan();
+
+    // for SdrTextObj, keep aRect up to date
+    maRect = tools::Rectangle::Justify(aPoint0, aPoint1);
+}
+
+void SdrPathObj::ImpForceKind()
+{
+    if (meKind==OBJ_PATHPLIN) meKind=OBJ_PLIN;
+    if (meKind==OBJ_PATHPOLY) meKind=OBJ_POLY;
+
+    if(GetPathPoly().areControlPointsUsed())
+    {
+        switch (meKind)
+        {
+            case OBJ_LINE: meKind=OBJ_PATHLINE; break;
+            case OBJ_PLIN: meKind=OBJ_PATHLINE; break;
+            case OBJ_POLY: meKind=OBJ_PATHFILL; break;
+            default: break;
+        }
+    }
+    else
+    {
+        switch (meKind)
+        {
+            case OBJ_PATHLINE: meKind=OBJ_PLIN; break;
+            case OBJ_FREELINE: meKind=OBJ_PLIN; break;
+            case OBJ_PATHFILL: meKind=OBJ_POLY; break;
+            case OBJ_FREEFILL: meKind=OBJ_POLY; break;
+            default: break;
+        }
+    }
+
+    if (meKind==OBJ_LINE && !lcl_ImpIsLine(GetPathPoly())) meKind=OBJ_PLIN;
+    if (meKind==OBJ_PLIN && lcl_ImpIsLine(GetPathPoly())) meKind=OBJ_LINE;
+
+    bClosedObj=IsClosed();
+
+    if (meKind==OBJ_LINE)
+    {
+        ImpForceLineAngle();
+    }
+    else
+    {
+        // #i10659#, for polys with more than 2 points.
+
+        // Here i again need to fix something, because when Path-Polys are Copy-Pasted
+        // between Apps with different measurements (e.g. 100TH_MM and TWIPS) there is
+        // a scaling loop started from SdrExchangeView::Paste. In itself, this is not
+        // wrong, but aRect is wrong here and not even updated by RecalcSnapRect(). If
+        // this is the case, some size needs to be set here in aRect to avoid that the cycle
+        // through Rect2Poly - Poly2Rect does something badly wrong since that cycle is
+        // BASED on aRect. That cycle is triggered in SdrTextObj::NbcResize() which is called
+        // from the local Resize() implementation.
+
+        // Basic problem is that the member aRect in SdrTextObj basically is a unrotated
+        // text rectangle for the text object itself and methods at SdrTextObj do handle it
+        // in that way. Many draw objects derived from SdrTextObj 'abuse' aRect as SnapRect
+        // which is basically wrong. To make the SdrText methods which deal with aRect directly
+        // work it is necessary to always keep aRect updated. This e.g. not done after a Clone()
+        // command for SdrPathObj. Since adding this update mechanism with #101412# to
+        // ImpForceLineAngle() for lines was very successful, i add it to where ImpForceLineAngle()
+        // was called, once here below and once on a 2nd place below.
+
+        // #i10659# for SdrTextObj, keep aRect up to date
+        if(GetPathPoly().count())
+        {
+            maRect = lcl_ImpGetBoundRect(GetPathPoly());
+        }
+    }
+
+    // #i75974# adapt polygon state to object type. This may include a reinterpretation
+    // of a closed geometry as open one, but with identical first and last point
+    for(auto& rPolygon : maPathPolygon)
+    {
+        if(IsClosed() != rPolygon.isClosed())
+        {
+            // #i80213# really change polygon geometry; else e.g. the last point which
+            // needs to be identical with the first one will be missing when opening
+            // due to OBJ_PATH type
+            if(rPolygon.isClosed())
+            {
+                basegfx::utils::openWithGeometryChange(rPolygon);
+            }
+            else
+            {
+                basegfx::utils::closeWithGeometryChange(rPolygon);
+            }
+        }
+    }
+}
+
+void SdrPathObj::ImpSetClosed(bool bClose)
+{
+    if(bClose)
+    {
+        switch (meKind)
+        {
+            case OBJ_LINE    : meKind=OBJ_POLY;     break;
+            case OBJ_PLIN    : meKind=OBJ_POLY;     break;
+            case OBJ_PATHLINE: meKind=OBJ_PATHFILL; break;
+            case OBJ_FREELINE: meKind=OBJ_FREEFILL; break;
+            case OBJ_SPLNLINE: meKind=OBJ_SPLNFILL; break;
+            default: break;
+        }
+
+        bClosedObj = true;
+    }
+    else
+    {
+        switch (meKind)
+        {
+            case OBJ_POLY    : meKind=OBJ_PLIN;     break;
+            case OBJ_PATHFILL: meKind=OBJ_PATHLINE; break;
+            case OBJ_FREEFILL: meKind=OBJ_FREELINE; break;
+            case OBJ_SPLNFILL: meKind=OBJ_SPLNLINE; break;
+            default: break;
+        }
+
+        bClosedObj = false;
+    }
+
+    ImpForceKind();
+}
+
+void SdrPathObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bNoContortion=false;
+
+    bool bCanConv = !HasText() || ImpCanConvTextToCurve();
+    bool bIsPath = IsBezier() || IsSpline();
+
+    rInfo.bEdgeRadiusAllowed    = false;
+    rInfo.bCanConvToPath = bCanConv && !bIsPath;
+    rInfo.bCanConvToPoly = bCanConv && bIsPath;
+    rInfo.bCanConvToContour = !IsFontwork() && (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary());
+}
+
+sal_uInt16 SdrPathObj::GetObjIdentifier() const
+{
+    return sal_uInt16(meKind);
+}
+
+SdrPathObj* SdrPathObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrPathObj >(rTargetModel);
+}
+
+SdrPathObj& SdrPathObj::operator=(const SdrPathObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrTextObj::operator=(rObj);
+    maPathPolygon=rObj.GetPathPoly();
+    return *this;
+}
+
+OUString SdrPathObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName;
+
+    if(OBJ_LINE == meKind)
+    {
+        const char* pId(STR_ObjNameSingulLINE);
+
+        if(lcl_ImpIsLine(GetPathPoly()))
+        {
+            const basegfx::B2DPolygon aPoly(GetPathPoly().getB2DPolygon(0));
+            const basegfx::B2DPoint aB2DPoint0(aPoly.getB2DPoint(0));
+            const basegfx::B2DPoint aB2DPoint1(aPoly.getB2DPoint(1));
+
+            if(aB2DPoint0 != aB2DPoint1)
+            {
+                if(aB2DPoint0.getY() == aB2DPoint1.getY())
+                {
+                    pId = STR_ObjNameSingulLINE_Hori;
+                }
+                else if(aB2DPoint0.getX() == aB2DPoint1.getX())
+                {
+                    pId = STR_ObjNameSingulLINE_Vert;
+                }
+                else
+                {
+                    const double fDx(fabs(aB2DPoint0.getX() - aB2DPoint1.getX()));
+                    const double fDy(fabs(aB2DPoint0.getY() - aB2DPoint1.getY()));
+
+                    if(fDx == fDy)
+                    {
+                        pId = STR_ObjNameSingulLINE_Diag;
+                    }
+                }
+            }
+        }
+
+        sName.append(SvxResId(pId));
+    }
+    else if(OBJ_PLIN == meKind || OBJ_POLY == meKind)
+    {
+        const bool bClosed(OBJ_POLY == meKind);
+        const char* pId(nullptr);
+
+        if(mpDAC && mpDAC->IsCreating())
+        {
+            if(bClosed)
+            {
+                pId = STR_ObjNameSingulPOLY;
+            }
+            else
+            {
+                pId = STR_ObjNameSingulPLIN;
+            }
+
+            sName.append(SvxResId(pId));
+        }
+        else
+        {
+            // get point count
+            sal_uInt32 nPointCount(0);
+
+            for(auto const& rPolygon : GetPathPoly())
+            {
+                nPointCount += rPolygon.count();
+            }
+
+            if(bClosed)
+            {
+                pId = STR_ObjNameSingulPOLY_PointCount;
+            }
+            else
+            {
+                pId = STR_ObjNameSingulPLIN_PointCount;
+            }
+
+            OUString sTemp(SvxResId(pId));
+            // #i96537#
+            sName.append(sTemp.replaceFirst("%2", OUString::number(nPointCount)));
+        }
+    }
+    else
+    {
+        switch (meKind)
+        {
+            case OBJ_PATHLINE: sName.append(SvxResId(STR_ObjNameSingulPATHLINE)); break;
+            case OBJ_FREELINE: sName.append(SvxResId(STR_ObjNameSingulFREELINE)); break;
+            case OBJ_SPLNLINE: sName.append(SvxResId(STR_ObjNameSingulNATSPLN)); break;
+            case OBJ_PATHFILL: sName.append(SvxResId(STR_ObjNameSingulPATHFILL)); break;
+            case OBJ_FREEFILL: sName.append(SvxResId(STR_ObjNameSingulFREEFILL)); break;
+            case OBJ_SPLNFILL: sName.append(SvxResId(STR_ObjNameSingulPERSPLN)); break;
+            default: break;
+        }
+    }
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrPathObj::TakeObjNamePlural() const
+{
+    OUString sName;
+    switch(meKind)
+    {
+        case OBJ_LINE    : sName=SvxResId(STR_ObjNamePluralLINE    ); break;
+        case OBJ_PLIN    : sName=SvxResId(STR_ObjNamePluralPLIN    ); break;
+        case OBJ_POLY    : sName=SvxResId(STR_ObjNamePluralPOLY    ); break;
+        case OBJ_PATHLINE: sName=SvxResId(STR_ObjNamePluralPATHLINE); break;
+        case OBJ_FREELINE: sName=SvxResId(STR_ObjNamePluralFREELINE); break;
+        case OBJ_SPLNLINE: sName=SvxResId(STR_ObjNamePluralNATSPLN); break;
+        case OBJ_PATHFILL: sName=SvxResId(STR_ObjNamePluralPATHFILL); break;
+        case OBJ_FREEFILL: sName=SvxResId(STR_ObjNamePluralFREEFILL); break;
+        case OBJ_SPLNFILL: sName=SvxResId(STR_ObjNamePluralPERSPLN); break;
+        default: break;
+    }
+    return sName;
+}
+
+basegfx::B2DPolyPolygon SdrPathObj::TakeXorPoly() const
+{
+    return GetPathPoly();
+}
+
+sal_uInt32 SdrPathObj::GetHdlCount() const
+{
+    sal_uInt32 nRetval(0);
+
+    for(auto const& rPolygon : GetPathPoly())
+    {
+        nRetval += rPolygon.count();
+    }
+
+    return nRetval;
+}
+
+void SdrPathObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    // keep old stuff to be able to keep old SdrHdl stuff, too
+    const XPolyPolygon aOldPathPolygon(GetPathPoly());
+    sal_uInt16 nPolyCnt=aOldPathPolygon.Count();
+    bool bClosed=IsClosed();
+    sal_uInt16 nIdx=0;
+
+    for (sal_uInt16 i=0; i<nPolyCnt; i++) {
+        const XPolygon& rXPoly=aOldPathPolygon.GetObject(i);
+        sal_uInt16 nPntCnt=rXPoly.GetPointCount();
+        if (bClosed && nPntCnt>1) nPntCnt--;
+
+        for (sal_uInt16 j=0; j<nPntCnt; j++) {
+            if (rXPoly.GetFlags(j)!=PolyFlags::Control) {
+                const Point& rPnt=rXPoly[j];
+                std::unique_ptr<SdrHdl> pHdl(new SdrHdl(rPnt,SdrHdlKind::Poly));
+                pHdl->SetPolyNum(i);
+                pHdl->SetPointNum(j);
+                pHdl->Set1PixMore(j==0);
+                pHdl->SetSourceHdlNum(nIdx);
+                nIdx++;
+                rHdlList.AddHdl(std::move(pHdl));
+            }
+        }
+    }
+}
+
+void SdrPathObj::AddToPlusHdlList(SdrHdlList& rHdlList, SdrHdl& rHdl) const
+{
+    // keep old stuff to be able to keep old SdrHdl stuff, too
+    const XPolyPolygon aOldPathPolygon(GetPathPoly());
+    sal_uInt16 nPnt = static_cast<sal_uInt16>(rHdl.GetPointNum());
+    sal_uInt16 nPolyNum = static_cast<sal_uInt16>(rHdl.GetPolyNum());
+
+    if (nPolyNum>=aOldPathPolygon.Count())
+        return;
+
+    const XPolygon& rXPoly = aOldPathPolygon[nPolyNum];
+    sal_uInt16 nPntMax = rXPoly.GetPointCount();
+
+    if (nPntMax<=0)
+        return;
+    nPntMax--;
+    if (nPnt>nPntMax)
+        return;
+
+    // calculate the number of plus points
+    sal_uInt16 nCnt = 0;
+    if (rXPoly.GetFlags(nPnt)!=PolyFlags::Control)
+    {
+        if (nPnt==0 && IsClosed())
+            nPnt=nPntMax;
+        if (nPnt>0 && rXPoly.GetFlags(nPnt-1)==PolyFlags::Control)
+            nCnt++;
+        if (nPnt==nPntMax && IsClosed())
+            nPnt=0;
+        if (nPnt<nPntMax && rXPoly.GetFlags(nPnt+1)==PolyFlags::Control)
+            nCnt++;
+    }
+
+    // construct the plus points
+    for (sal_uInt32 nPlusNum = 0; nPlusNum < nCnt; ++nPlusNum)
+    {
+        nPnt = static_cast<sal_uInt16>(rHdl.GetPointNum());
+        std::unique_ptr<SdrHdl> pHdl(new SdrHdlBezWgt(&rHdl));
+        pHdl->SetPolyNum(rHdl.GetPolyNum());
+
+        if (nPnt==0 && IsClosed())
+            nPnt=nPntMax;
+        if (nPnt>0 && rXPoly.GetFlags(nPnt-1)==PolyFlags::Control && nPlusNum==0)
+        {
+            pHdl->SetPos(rXPoly[nPnt-1]);
+            pHdl->SetPointNum(nPnt-1);
+        }
+        else
+        {
+            if (nPnt==nPntMax && IsClosed())
+                nPnt=0;
+            if (nPnt<rXPoly.GetPointCount()-1 && rXPoly.GetFlags(nPnt+1)==PolyFlags::Control)
+            {
+                pHdl->SetPos(rXPoly[nPnt+1]);
+                pHdl->SetPointNum(nPnt+1);
+            }
+        }
+
+        pHdl->SetSourceHdlNum(rHdl.GetSourceHdlNum());
+        pHdl->SetPlusHdl(true);
+        rHdlList.AddHdl(std::move(pHdl));
+    }
+}
+
+// dragging
+
+bool SdrPathObj::hasSpecialDrag() const
+{
+    return true;
+}
+
+bool SdrPathObj::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    ImpPathForDragAndCreate aDragAndCreate(*const_cast<SdrPathObj*>(this));
+
+    return aDragAndCreate.beginPathDrag(rDrag);
+}
+
+bool SdrPathObj::applySpecialDrag(SdrDragStat& rDrag)
+{
+    ImpPathForDragAndCreate aDragAndCreate(*this);
+    bool bRetval(aDragAndCreate.beginPathDrag(rDrag));
+
+    if(bRetval)
+    {
+        bRetval = aDragAndCreate.movePathDrag(rDrag);
+    }
+
+    if(bRetval)
+    {
+        bRetval = aDragAndCreate.endPathDrag(rDrag);
+    }
+
+    if(bRetval)
+    {
+           NbcSetPathPoly(aDragAndCreate.getModifiedPolyPolygon());
+    }
+
+    return bRetval;
+}
+
+OUString SdrPathObj::getSpecialDragComment(const SdrDragStat& rDrag) const
+{
+    OUString aRetval;
+
+    if(mpDAC)
+    {
+        // #i103058# also get a comment when in creation
+        const bool bCreateComment(rDrag.GetView() && this == rDrag.GetView()->GetCreateObj());
+
+        if(bCreateComment)
+        {
+            aRetval = mpDAC->getSpecialDragComment(rDrag);
+        }
+    }
+    else
+    {
+        ImpPathForDragAndCreate aDragAndCreate(*const_cast<SdrPathObj*>(this));
+        bool bDidWork(aDragAndCreate.beginPathDrag(rDrag));
+
+        if(bDidWork)
+        {
+            aRetval = aDragAndCreate.getSpecialDragComment(rDrag);
+        }
+    }
+
+    return aRetval;
+}
+
+basegfx::B2DPolyPolygon SdrPathObj::getSpecialDragPoly(const SdrDragStat& rDrag) const
+{
+    basegfx::B2DPolyPolygon aRetval;
+    ImpPathForDragAndCreate aDragAndCreate(*const_cast<SdrPathObj*>(this));
+    bool bDidWork(aDragAndCreate.beginPathDrag(rDrag));
+
+    if(bDidWork)
+    {
+        aRetval = aDragAndCreate.getSpecialDragPoly(rDrag);
+    }
+
+    return aRetval;
+}
+
+// creation
+
+bool SdrPathObj::BegCreate(SdrDragStat& rStat)
+{
+    mpDAC.reset();
+    impGetDAC().BegCreate(rStat);
+    return true;
+}
+
+bool SdrPathObj::MovCreate(SdrDragStat& rStat)
+{
+    return impGetDAC().MovCreate(rStat);
+}
+
+bool SdrPathObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    bool bRetval(impGetDAC().EndCreate(rStat, eCmd));
+
+    if(bRetval && mpDAC)
+    {
+        SetPathPoly(mpDAC->getModifiedPolyPolygon());
+
+        // #i75974# Check for AutoClose feature. Moved here from ImpPathForDragAndCreate::EndCreate
+        // to be able to use the type-changing ImpSetClosed method
+        if(!IsClosedObj())
+        {
+            SdrView* pView = rStat.GetView();
+
+            if(pView && !pView->IsUseIncompatiblePathCreateInterface())
+            {
+                OutputDevice* pOut = pView->GetFirstOutputDevice();
+
+                if(pOut)
+                {
+                    if(GetPathPoly().count())
+                    {
+                        const basegfx::B2DPolygon aCandidate(GetPathPoly().getB2DPolygon(0));
+
+                        if(aCandidate.count() > 2)
+                        {
+                            // check distance of first and last point
+                            const sal_Int32 nCloseDist(pOut->PixelToLogic(Size(pView->GetAutoCloseDistPix(), 0)).Width());
+                            const basegfx::B2DVector aDistVector(aCandidate.getB2DPoint(aCandidate.count() - 1) - aCandidate.getB2DPoint(0));
+
+                            if(aDistVector.getLength() <= static_cast<double>(nCloseDist))
+                            {
+                                // close it
+                                ImpSetClosed(true);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+
+        mpDAC.reset();
+    }
+
+    return bRetval;
+}
+
+bool SdrPathObj::BckCreate(SdrDragStat& rStat)
+{
+    return impGetDAC().BckCreate(rStat);
+}
+
+void SdrPathObj::BrkCreate(SdrDragStat& rStat)
+{
+    impGetDAC().BrkCreate(rStat);
+    mpDAC.reset();
+}
+
+// polygons
+
+basegfx::B2DPolyPolygon SdrPathObj::TakeCreatePoly(const SdrDragStat& rDrag) const
+{
+    basegfx::B2DPolyPolygon aRetval;
+
+    if(mpDAC)
+    {
+        aRetval = mpDAC->TakeObjectPolyPolygon(rDrag);
+        aRetval.append(ImpPathForDragAndCreate::TakeDragPolyPolygon(rDrag));
+    }
+
+    return aRetval;
+}
+
+// during drag or create, allow accessing the so-far created/modified polyPolygon
+basegfx::B2DPolyPolygon SdrPathObj::getObjectPolyPolygon(const SdrDragStat& rDrag) const
+{
+    basegfx::B2DPolyPolygon aRetval;
+
+    if(mpDAC)
+    {
+        aRetval = mpDAC->TakeObjectPolyPolygon(rDrag);
+    }
+
+    return aRetval;
+}
+
+basegfx::B2DPolyPolygon SdrPathObj::getDragPolyPolygon(const SdrDragStat& rDrag) const
+{
+    basegfx::B2DPolyPolygon aRetval;
+
+    if(mpDAC)
+    {
+        aRetval = ImpPathForDragAndCreate::TakeDragPolyPolygon(rDrag);
+    }
+
+    return aRetval;
+}
+
+PointerStyle SdrPathObj::GetCreatePointer() const
+{
+    return impGetDAC().GetCreatePointer();
+}
+
+void SdrPathObj::NbcMove(const Size& rSiz)
+{
+    maPathPolygon.transform(basegfx::utils::createTranslateB2DHomMatrix(rSiz.Width(), rSiz.Height()));
+
+    // #i19871# first modify locally, then call parent (to get correct SnapRect with GluePoints)
+    SdrTextObj::NbcMove(rSiz);
+}
+
+void SdrPathObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    const double fResizeX(xFact);
+    const double fResizeY(yFact);
+
+    if(basegfx::fTools::equal(fResizeX, 1.0) && basegfx::fTools::equal(fResizeY, 1.0))
+    {
+        // tdf#106792 avoid numerical unprecisions: If both scale factors are 1.0, do not
+        // manipulate at all - that may change aGeo rapidly (and wrongly) in
+        // SdrTextObj::NbcResize. Combined with the UNO API trying to not 'apply'
+        // a rotation but to manipulate the existing one, this is fatal. So just
+        // avoid this error as long as we have to deal with imprecise geometry
+        // manipulations
+        return;
+    }
+
+    basegfx::B2DHomMatrix aTrans(basegfx::utils::createTranslateB2DHomMatrix(-rRef.X(), -rRef.Y()));
+    aTrans = basegfx::utils::createScaleTranslateB2DHomMatrix(
+        double(xFact), double(yFact), rRef.X(), rRef.Y()) * aTrans;
+    maPathPolygon.transform(aTrans);
+
+    // #i19871# first modify locally, then call parent (to get correct SnapRect with GluePoints)
+    SdrTextObj::NbcResize(rRef,xFact,yFact);
+}
+
+void SdrPathObj::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    // Thank JOE, the angles are defined mirrored to the mathematical meanings
+    const basegfx::B2DHomMatrix aTrans(
+        basegfx::utils::createRotateAroundPoint(rRef.X(), rRef.Y(), -nAngle * F_PI18000));
+    maPathPolygon.transform(aTrans);
+
+    // #i19871# first modify locally, then call parent (to get correct SnapRect with GluePoints)
+    SdrTextObj::NbcRotate(rRef,nAngle,sn,cs);
+}
+
+void SdrPathObj::NbcShear(const Point& rRefPnt, long nAngle, double fTan, bool bVShear)
+{
+    basegfx::B2DHomMatrix aTrans(basegfx::utils::createTranslateB2DHomMatrix(-rRefPnt.X(), -rRefPnt.Y()));
+
+    if(bVShear)
+    {
+        // Thank JOE, the angles are defined mirrored to the mathematical meanings
+        aTrans.shearY(-fTan);
+    }
+    else
+    {
+        aTrans.shearX(-fTan);
+    }
+
+    aTrans.translate(rRefPnt.X(), rRefPnt.Y());
+    maPathPolygon.transform(aTrans);
+
+    // #i19871# first modify locally, then call parent (to get correct SnapRect with GluePoints)
+    SdrTextObj::NbcShear(rRefPnt,nAngle,fTan,bVShear);
+}
+
+void SdrPathObj::NbcMirror(const Point& rRefPnt1, const Point& rRefPnt2)
+{
+    const double fDiffX(rRefPnt2.X() - rRefPnt1.X());
+    const double fDiffY(rRefPnt2.Y() - rRefPnt1.Y());
+    const double fRot(atan2(fDiffY, fDiffX));
+    basegfx::B2DHomMatrix aTrans(basegfx::utils::createTranslateB2DHomMatrix(-rRefPnt1.X(), -rRefPnt1.Y()));
+    aTrans.rotate(-fRot);
+    aTrans.scale(1.0, -1.0);
+    aTrans.rotate(fRot);
+    aTrans.translate(rRefPnt1.X(), rRefPnt1.Y());
+    maPathPolygon.transform(aTrans);
+
+    // Do Joe's special handling for lines when mirroring, too
+    ImpForceKind();
+
+    // #i19871# first modify locally, then call parent (to get correct SnapRect with GluePoints)
+    SdrTextObj::NbcMirror(rRefPnt1,rRefPnt2);
+}
+
+void SdrPathObj::TakeUnrotatedSnapRect(tools::Rectangle& rRect) const
+{
+    if(!aGeo.nRotationAngle)
+    {
+        rRect = GetSnapRect();
+    }
+    else
+    {
+        XPolyPolygon aXPP(GetPathPoly());
+        RotateXPoly(aXPP,Point(),-aGeo.nSin,aGeo.nCos);
+        rRect=aXPP.GetBoundRect();
+        Point aTmp(rRect.TopLeft());
+        RotatePoint(aTmp,Point(),aGeo.nSin,aGeo.nCos);
+        aTmp-=rRect.TopLeft();
+        rRect.Move(aTmp.X(),aTmp.Y());
+    }
+}
+
+void SdrPathObj::RecalcSnapRect()
+{
+    if(GetPathPoly().count())
+    {
+        maSnapRect = lcl_ImpGetBoundRect(GetPathPoly());
+    }
+}
+
+void SdrPathObj::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aOld(GetSnapRect());
+    if (aOld.IsEmpty())
+    {
+        Fraction aX(1,1);
+        Fraction aY(1,1);
+        NbcResize(aOld.TopLeft(), aX, aY);
+        NbcMove(Size(rRect.Left() - aOld.Left(), rRect.Top() - aOld.Top()));
+        return;
+    }
+
+    // Take empty into account when calculating scale factors
+    long nMulX = rRect.IsWidthEmpty() ? 0 : rRect.Right()  - rRect.Left();
+
+    long nDivX = aOld.Right()   - aOld.Left();
+
+    // Take empty into account when calculating scale factors
+    long nMulY = rRect.IsHeightEmpty() ? 0 : rRect.Bottom() - rRect.Top();
+
+    long nDivY = aOld.Bottom()  - aOld.Top();
+    if ( nDivX == 0 ) { nMulX = 1; nDivX = 1; }
+    if ( nDivY == 0 ) { nMulY = 1; nDivY = 1; }
+    if ( nDivX == nMulX ) { nMulX = 1; nDivX = 1; }
+    if ( nDivY == nMulY ) { nMulY = 1; nDivY = 1; }
+    Fraction aX(nMulX,nDivX);
+    Fraction aY(nMulY,nDivY);
+    NbcResize(aOld.TopLeft(), aX, aY);
+    NbcMove(Size(rRect.Left() - aOld.Left(), rRect.Top() - aOld.Top()));
+}
+
+sal_uInt32 SdrPathObj::GetSnapPointCount() const
+{
+    return GetHdlCount();
+}
+
+Point SdrPathObj::GetSnapPoint(sal_uInt32 nSnapPnt) const
+{
+    sal_uInt32 nPoly,nPnt;
+    if(!PolyPolygonEditor::GetRelativePolyPoint(GetPathPoly(), nSnapPnt, nPoly, nPnt))
+    {
+        SAL_WARN("svx", "SdrPathObj::GetSnapPoint: Point nSnapPnt does not exist.");
+    }
+
+    const basegfx::B2DPoint aB2DPoint(GetPathPoly().getB2DPolygon(nPoly).getB2DPoint(nPnt));
+    return Point(FRound(aB2DPoint.getX()), FRound(aB2DPoint.getY()));
+}
+
+bool SdrPathObj::IsPolyObj() const
+{
+    return true;
+}
+
+sal_uInt32 SdrPathObj::GetPointCount() const
+{
+    sal_uInt32 nRetval(0);
+
+    for(auto const& rPolygon : GetPathPoly())
+    {
+        nRetval += rPolygon.count();
+    }
+
+    return nRetval;
+}
+
+Point SdrPathObj::GetPoint(sal_uInt32 nHdlNum) const
+{
+    Point aRetval;
+    sal_uInt32 nPoly,nPnt;
+
+    if(PolyPolygonEditor::GetRelativePolyPoint(GetPathPoly(), nHdlNum, nPoly, nPnt))
+    {
+        const basegfx::B2DPolygon aPoly(GetPathPoly().getB2DPolygon(nPoly));
+        const basegfx::B2DPoint aPoint(aPoly.getB2DPoint(nPnt));
+        aRetval = Point(FRound(aPoint.getX()), FRound(aPoint.getY()));
+    }
+
+    return aRetval;
+}
+
+void SdrPathObj::NbcSetPoint(const Point& rPnt, sal_uInt32 nHdlNum)
+{
+    sal_uInt32 nPoly,nPnt;
+
+    if(PolyPolygonEditor::GetRelativePolyPoint(GetPathPoly(), nHdlNum, nPoly, nPnt))
+    {
+        basegfx::B2DPolygon aNewPolygon(GetPathPoly().getB2DPolygon(nPoly));
+        aNewPolygon.setB2DPoint(nPnt, basegfx::B2DPoint(rPnt.X(), rPnt.Y()));
+        maPathPolygon.setB2DPolygon(nPoly, aNewPolygon);
+
+        if(meKind==OBJ_LINE)
+        {
+            ImpForceLineAngle();
+        }
+        else
+        {
+            if(GetPathPoly().count())
+            {
+                // #i10659# for SdrTextObj, keep aRect up to date
+                maRect = lcl_ImpGetBoundRect(GetPathPoly());
+            }
+        }
+
+        SetRectsDirty();
+    }
+}
+
+sal_uInt32 SdrPathObj::NbcInsPointOld(const Point& rPos, bool bNewObj)
+{
+    sal_uInt32 nNewHdl;
+
+    if(bNewObj)
+    {
+        nNewHdl = NbcInsPoint(rPos, true);
+    }
+    else
+    {
+        // look for smallest distance data
+        const basegfx::B2DPoint aTestPoint(rPos.X(), rPos.Y());
+        sal_uInt32 nSmallestPolyIndex(0);
+        sal_uInt32 nSmallestEdgeIndex(0);
+        double fSmallestCut;
+        basegfx::utils::getSmallestDistancePointToPolyPolygon(GetPathPoly(), aTestPoint, nSmallestPolyIndex, nSmallestEdgeIndex, fSmallestCut);
+
+        nNewHdl = NbcInsPoint(rPos, false);
+    }
+
+    ImpForceKind();
+    return nNewHdl;
+}
+
+sal_uInt32 SdrPathObj::NbcInsPoint(const Point& rPos, bool bNewObj)
+{
+    sal_uInt32 nNewHdl;
+
+    if(bNewObj)
+    {
+        basegfx::B2DPolygon aNewPoly;
+        const basegfx::B2DPoint aPoint(rPos.X(), rPos.Y());
+        aNewPoly.append(aPoint);
+        aNewPoly.setClosed(IsClosed());
+        maPathPolygon.append(aNewPoly);
+        SetRectsDirty();
+        nNewHdl = GetHdlCount();
+    }
+    else
+    {
+        // look for smallest distance data
+        const basegfx::B2DPoint aTestPoint(rPos.X(), rPos.Y());
+        sal_uInt32 nSmallestPolyIndex(0);
+        sal_uInt32 nSmallestEdgeIndex(0);
+        double fSmallestCut;
+        basegfx::utils::getSmallestDistancePointToPolyPolygon(GetPathPoly(), aTestPoint, nSmallestPolyIndex, nSmallestEdgeIndex, fSmallestCut);
+        basegfx::B2DPolygon aCandidate(GetPathPoly().getB2DPolygon(nSmallestPolyIndex));
+        const bool bBefore(!aCandidate.isClosed() && 0 == nSmallestEdgeIndex && 0.0 == fSmallestCut);
+        const bool bAfter(!aCandidate.isClosed() && aCandidate.count() == nSmallestEdgeIndex + 2 && 1.0 == fSmallestCut);
+
+        if(bBefore)
+        {
+            // before first point
+            aCandidate.insert(0, aTestPoint);
+
+            if(aCandidate.areControlPointsUsed())
+            {
+                if(aCandidate.isNextControlPointUsed(1))
+                {
+                    aCandidate.setNextControlPoint(0, interpolate(aTestPoint, aCandidate.getB2DPoint(1), (1.0 / 3.0)));
+                    aCandidate.setPrevControlPoint(1, interpolate(aTestPoint, aCandidate.getB2DPoint(1), (2.0 / 3.0)));
+                }
+            }
+
+            nNewHdl = 0;
+        }
+        else if(bAfter)
+        {
+            // after last point
+            aCandidate.append(aTestPoint);
+
+            if(aCandidate.areControlPointsUsed())
+            {
+                if(aCandidate.isPrevControlPointUsed(aCandidate.count() - 2))
+                {
+                    aCandidate.setNextControlPoint(aCandidate.count() - 2, interpolate(aCandidate.getB2DPoint(aCandidate.count() - 2), aTestPoint, (1.0 / 3.0)));
+                    aCandidate.setPrevControlPoint(aCandidate.count() - 1, interpolate(aCandidate.getB2DPoint(aCandidate.count() - 2), aTestPoint, (2.0 / 3.0)));
+                }
+            }
+
+            nNewHdl = aCandidate.count() - 1;
+        }
+        else
+        {
+            // in between
+            bool bSegmentSplit(false);
+            const sal_uInt32 nNextIndex((nSmallestEdgeIndex + 1) % aCandidate.count());
+
+            if(aCandidate.areControlPointsUsed())
+            {
+                if(aCandidate.isNextControlPointUsed(nSmallestEdgeIndex) || aCandidate.isPrevControlPointUsed(nNextIndex))
+                {
+                    bSegmentSplit = true;
+                }
+            }
+
+            if(bSegmentSplit)
+            {
+                // rebuild original segment to get the split data
+                basegfx::B2DCubicBezier aBezierA, aBezierB;
+                const basegfx::B2DCubicBezier aBezier(
+                    aCandidate.getB2DPoint(nSmallestEdgeIndex),
+                    aCandidate.getNextControlPoint(nSmallestEdgeIndex),
+                    aCandidate.getPrevControlPoint(nNextIndex),
+                    aCandidate.getB2DPoint(nNextIndex));
+
+                // split and insert hit point
+                aBezier.split(fSmallestCut, &aBezierA, &aBezierB);
+                aCandidate.insert(nSmallestEdgeIndex + 1, aTestPoint);
+
+                // since we inserted hit point and not split point, we need to add an offset
+                // to the control points to get the C1 continuity we want to achieve
+                const basegfx::B2DVector aOffset(aTestPoint - aBezierA.getEndPoint());
+                aCandidate.setNextControlPoint(nSmallestEdgeIndex, aBezierA.getControlPointA() + aOffset);
+                aCandidate.setPrevControlPoint(nSmallestEdgeIndex + 1, aBezierA.getControlPointB() + aOffset);
+                aCandidate.setNextControlPoint(nSmallestEdgeIndex + 1, aBezierB.getControlPointA() + aOffset);
+                aCandidate.setPrevControlPoint((nSmallestEdgeIndex + 2) % aCandidate.count(), aBezierB.getControlPointB() + aOffset);
+            }
+            else
+            {
+                aCandidate.insert(nSmallestEdgeIndex + 1, aTestPoint);
+            }
+
+            nNewHdl = nSmallestEdgeIndex + 1;
+        }
+
+        maPathPolygon.setB2DPolygon(nSmallestPolyIndex, aCandidate);
+
+        // create old polygon index from it
+        for(sal_uInt32 a(0); a < nSmallestPolyIndex; a++)
+        {
+            nNewHdl += GetPathPoly().getB2DPolygon(a).count();
+        }
+    }
+
+    ImpForceKind();
+    return nNewHdl;
+}
+
+SdrObject* SdrPathObj::RipPoint(sal_uInt32 nHdlNum, sal_uInt32& rNewPt0Index)
+{
+    SdrPathObj* pNewObj = nullptr;
+    const basegfx::B2DPolyPolygon aLocalPolyPolygon(GetPathPoly());
+    sal_uInt32 nPoly, nPnt;
+
+    if(PolyPolygonEditor::GetRelativePolyPoint(aLocalPolyPolygon, nHdlNum, nPoly, nPnt))
+    {
+        if(0 == nPoly)
+        {
+            const basegfx::B2DPolygon& aCandidate(aLocalPolyPolygon.getB2DPolygon(nPoly));
+            const sal_uInt32 nPointCount(aCandidate.count());
+
+            if(nPointCount)
+            {
+                if(IsClosed())
+                {
+                    // when closed, RipPoint means to open the polygon at the selected point. To
+                    // be able to do that, it is necessary to make the selected point the first one
+                    basegfx::B2DPolygon aNewPolygon(basegfx::utils::makeStartPoint(aCandidate, nPnt));
+                    SetPathPoly(basegfx::B2DPolyPolygon(aNewPolygon));
+                    ToggleClosed();
+
+                    // give back new position of old start point (historical reasons)
+                    rNewPt0Index = (nPointCount - nPnt) % nPointCount;
+                }
+                else
+                {
+                    if(nPointCount >= 3 && nPnt != 0 && nPnt + 1 < nPointCount)
+                    {
+                        // split in two objects at point nPnt
+                        basegfx::B2DPolygon aSplitPolyA(aCandidate, 0, nPnt + 1);
+                        SetPathPoly(basegfx::B2DPolyPolygon(aSplitPolyA));
+
+                        pNewObj = CloneSdrObject(getSdrModelFromSdrObject());
+                        basegfx::B2DPolygon aSplitPolyB(aCandidate, nPnt, nPointCount - nPnt);
+                        pNewObj->SetPathPoly(basegfx::B2DPolyPolygon(aSplitPolyB));
+                    }
+                }
+            }
+        }
+    }
+
+    return pNewObj;
+}
+
+SdrObjectUniquePtr SdrPathObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    // #i89784# check for FontWork with activated HideContour
+    const drawinglayer::attribute::SdrTextAttribute aText(
+        drawinglayer::primitive2d::createNewSdrTextAttribute(GetObjectItemSet(), *getText(0)));
+    const bool bHideContour(
+        !aText.isDefault() && !aText.getSdrFormTextAttribute().isDefault() && aText.isHideContour());
+
+    SdrObjectUniquePtr pRet;
+
+    if(!bHideContour)
+    {
+        SdrPathObjUniquePtr pPath = ImpConvertMakeObj(GetPathPoly(), IsClosed(), bBezier);
+
+        if(pPath->GetPathPoly().areControlPointsUsed())
+        {
+            if(!bBezier)
+            {
+                // reduce all bezier curves
+                pPath->SetPathPoly(basegfx::utils::adaptiveSubdivideByAngle(pPath->GetPathPoly()));
+            }
+        }
+        else
+        {
+            if(bBezier)
+            {
+                // create bezier curves
+                pPath->SetPathPoly(basegfx::utils::expandToCurve(pPath->GetPathPoly()));
+            }
+        }
+        pRet = std::move(pPath);
+    }
+
+    if(bAddText)
+    {
+        pRet = ImpConvertAddText(std::move(pRet), bBezier);
+    }
+
+    return pRet;
+}
+
+SdrObjGeoData* SdrPathObj::NewGeoData() const
+{
+    return new SdrPathObjGeoData;
+}
+
+void SdrPathObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrTextObj::SaveGeoData(rGeo);
+    SdrPathObjGeoData& rPGeo = static_cast<SdrPathObjGeoData&>( rGeo );
+    rPGeo.maPathPolygon=GetPathPoly();
+    rPGeo.meKind=meKind;
+}
+
+void SdrPathObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrTextObj::RestGeoData(rGeo);
+    const SdrPathObjGeoData& rPGeo=static_cast<const SdrPathObjGeoData&>(rGeo);
+    maPathPolygon=rPGeo.maPathPolygon;
+    meKind=rPGeo.meKind;
+    ImpForceKind(); // to set bClosed (among other things)
+}
+
+void SdrPathObj::NbcSetPathPoly(const basegfx::B2DPolyPolygon& rPathPoly)
+{
+    if(GetPathPoly() != rPathPoly)
+    {
+        maPathPolygon=rPathPoly;
+        ImpForceKind();
+        SetRectsDirty();
+    }
+}
+
+void SdrPathObj::SetPathPoly(const basegfx::B2DPolyPolygon& rPathPoly)
+{
+    if(GetPathPoly() != rPathPoly)
+    {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcSetPathPoly(rPathPoly);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrPathObj::ToggleClosed()
+{
+    tools::Rectangle aBoundRect0;
+    if(pUserCall != nullptr)
+        aBoundRect0 = GetLastBoundRect();
+    ImpSetClosed(!IsClosed()); // set new ObjKind
+    ImpForceKind(); // because we want Line -> Poly -> PolyLine instead of Line -> Poly -> Line
+    SetRectsDirty();
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize, aBoundRect0);
+}
+
+ImpPathForDragAndCreate& SdrPathObj::impGetDAC() const
+{
+    if(!mpDAC)
+    {
+        const_cast<SdrPathObj*>(this)->mpDAC.reset(new ImpPathForDragAndCreate(*const_cast<SdrPathObj*>(this)));
+    }
+
+    return *mpDAC;
+}
+
+
+// transformation interface for StarOfficeAPI. This implements support for
+// homogeneous 3x3 matrices containing the transformation of the SdrObject. At the
+// moment it contains a shearX, rotation and translation, but for setting all linear
+// transforms like Scale, ShearX, ShearY, Rotate and Translate are supported.
+
+
+// gets base transformation and rectangle of object. If it's an SdrPathObj it fills the PolyPolygon
+// with the base geometry and returns TRUE. Otherwise it returns FALSE.
+bool SdrPathObj::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& rPolyPolygon) const
+{
+    double fRotate(0.0);
+    double fShearX(0.0);
+    basegfx::B2DTuple aScale(1.0, 1.0);
+    basegfx::B2DTuple aTranslate(0.0, 0.0);
+
+    if(GetPathPoly().count())
+    {
+        // copy geometry
+        basegfx::B2DHomMatrix aMoveToZeroMatrix;
+        rPolyPolygon = GetPathPoly();
+
+        if(OBJ_LINE == meKind)
+        {
+            // ignore shear and rotate, just use scale and translate
+            OSL_ENSURE(GetPathPoly().count() > 0 && GetPathPoly().getB2DPolygon(0).count() > 1, "OBJ_LINE with too few polygons (!)");
+            // #i72287# use polygon without control points for range calculation. Do not change rPolyPolygon
+            // itself, else this method will no longer return the full polygon information (curve will
+            // be lost)
+            const basegfx::B2DRange aPolyRangeNoCurve(basegfx::utils::getRange(rPolyPolygon));
+            aScale = aPolyRangeNoCurve.getRange();
+            aTranslate = aPolyRangeNoCurve.getMinimum();
+
+            // define matrix for move polygon to zero point
+            aMoveToZeroMatrix.translate(-aTranslate.getX(), -aTranslate.getY());
+        }
+        else
+        {
+            if(aGeo.nShearAngle || aGeo.nRotationAngle)
+            {
+                // get rotate and shear in drawingLayer notation
+                fRotate = aGeo.nRotationAngle * F_PI18000;
+                fShearX = aGeo.nShearAngle * F_PI18000;
+
+                // build mathematically correct (negative shear and rotate) object transform
+                // containing shear and rotate to extract unsheared, unrotated polygon
+                basegfx::B2DHomMatrix aObjectMatrix;
+                aObjectMatrix.shearX(tan((36000 - aGeo.nShearAngle) * F_PI18000));
+                aObjectMatrix.rotate((36000 - aGeo.nRotationAngle) * F_PI18000);
+
+                // create inverse from it and back-transform polygon
+                basegfx::B2DHomMatrix aInvObjectMatrix(aObjectMatrix);
+                aInvObjectMatrix.invert();
+                rPolyPolygon.transform(aInvObjectMatrix);
+
+                // get range from unsheared, unrotated polygon and extract scale and translate.
+                // transform topLeft from it back to transformed state to get original
+                // topLeft (rotation center)
+                // #i72287# use polygon without control points for range calculation. Do not change rPolyPolygon
+                // itself, else this method will no longer return the full polygon information (curve will
+                // be lost)
+                const basegfx::B2DRange aCorrectedRangeNoCurve(basegfx::utils::getRange(rPolyPolygon));
+                aTranslate = aObjectMatrix * aCorrectedRangeNoCurve.getMinimum();
+                aScale = aCorrectedRangeNoCurve.getRange();
+
+                // define matrix for move polygon to zero point
+                // #i112280# Added missing minus for Y-Translation
+                aMoveToZeroMatrix.translate(-aCorrectedRangeNoCurve.getMinX(), -aCorrectedRangeNoCurve.getMinY());
+            }
+            else
+            {
+                // get scale and translate from unsheared, unrotated polygon
+                // #i72287# use polygon without control points for range calculation. Do not change rPolyPolygon
+                // itself, else this method will no longer return the full polygon information (curve will
+                // be lost)
+                const basegfx::B2DRange aPolyRangeNoCurve(basegfx::utils::getRange(rPolyPolygon));
+                aScale = aPolyRangeNoCurve.getRange();
+                aTranslate = aPolyRangeNoCurve.getMinimum();
+
+                // define matrix for move polygon to zero point
+                aMoveToZeroMatrix.translate(-aTranslate.getX(), -aTranslate.getY());
+            }
+        }
+
+        // move polygon to zero point with pre-defined matrix
+        rPolyPolygon.transform(aMoveToZeroMatrix);
+    }
+
+    // position maybe relative to anchorpos, convert
+    if( getSdrModelFromSdrObject().IsWriter() )
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build return value matrix
+    rMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+        aScale,
+        basegfx::fTools::equalZero(fShearX) ? 0.0 : tan(fShearX),
+        basegfx::fTools::equalZero(fRotate) ? 0.0 : -fRotate,
+        aTranslate);
+
+    return true;
+}
+
+// Sets the base geometry of the object using infos contained in the homogeneous 3x3 matrix.
+// If it's an SdrPathObj it will use the provided geometry information. The Polygon has
+// to use (0,0) as upper left and will be scaled to the given size in the matrix.
+void SdrPathObj::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& rPolyPolygon)
+{
+    // break up matrix
+    basegfx::B2DTuple aScale;
+    basegfx::B2DTuple aTranslate;
+    double fRotate, fShearX;
+    rMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings
+    // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly
+    if(basegfx::fTools::less(aScale.getX(), 0.0) && basegfx::fTools::less(aScale.getY(), 0.0))
+    {
+        aScale.setX(fabs(aScale.getX()));
+        aScale.setY(fabs(aScale.getY()));
+        fRotate = fmod(fRotate + F_PI, F_2PI);
+    }
+
+    // copy poly
+    basegfx::B2DPolyPolygon aNewPolyPolygon(rPolyPolygon);
+
+    // reset object shear and rotations
+    aGeo.nRotationAngle = 0;
+    aGeo.RecalcSinCos();
+    aGeo.nShearAngle = 0;
+    aGeo.RecalcTan();
+
+    if( getSdrModelFromSdrObject().IsWriter() )
+    {
+        // if anchor is used, make position relative to it
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // create transformation for polygon, set values at aGeo direct
+    basegfx::B2DHomMatrix aTransform;
+
+    // #i75086#
+    // Given polygon is already scaled (for historical reasons), but not mirrored yet.
+    // Thus, when scale is negative in X or Y, apply the needed mirroring accordingly.
+    double fScaleX(basegfx::fTools::less(aScale.getX(), 0.0) ? -1.0 : 1.0);
+    double fScaleY(basegfx::fTools::less(aScale.getY(), 0.0) ? -1.0 : 1.0);
+
+    // tdf#98565, tdf#98584. While loading a shape, svg:width and svg:height is used to scale
+    // the polygon. But draw:transform might introduce additional scaling factors, which need to
+    // be applied to the polygon too, so aScale cannot be ignored while loading.
+    // I use "maSnapRect.IsEmpty() && GetPathPoly().count()" to detect this case. Any better
+    // idea? The behavior in other cases is the same as it was before this fix.
+    if (maSnapRect.IsEmpty() && GetPathPoly().count())
+    {
+        // In case of a Writer document, the scaling factors were converted to twips. That is not
+        // correct here, because width and height are already in the points coordinates and aScale
+        // is no length but only a factor here. Convert back.
+        if (getSdrModelFromSdrObject().IsWriter())
+        {
+            aScale.setX(aScale.getX() * 127.0 / 72.0);
+            aScale.setY(aScale.getY() * 127.0 / 72.0);
+        }
+        fScaleX *= fabs(aScale.getX());
+        fScaleY *= fabs(aScale.getY());
+    }
+
+    if (fScaleX != 1.0 || fScaleY != 1.0)
+        aTransform.scale(fScaleX, fScaleY);
+
+    if(!basegfx::fTools::equalZero(fShearX))
+    {
+        aTransform.shearX(tan(-atan(fShearX)));
+        aGeo.nShearAngle = FRound(atan(fShearX) / F_PI18000);
+        aGeo.RecalcTan();
+    }
+
+    if(!basegfx::fTools::equalZero(fRotate))
+    {
+        // #i78696#
+        // fRotate is mathematically correct for linear transformations, so it's
+        // the one to use for the geometry change
+        aTransform.rotate(fRotate);
+
+        // #i78696#
+        // fRotate is mathematically correct, but aGeoStat.nRotationAngle is
+        // mirrored -> mirror value here
+        aGeo.nRotationAngle = NormAngle36000(FRound(-fRotate / F_PI18000));
+        aGeo.RecalcSinCos();
+    }
+
+    if(!aTranslate.equalZero())
+    {
+        // #i39529# absolute positioning, so get current position (without control points (!))
+        const basegfx::B2DRange aCurrentRange(basegfx::utils::getRange(aNewPolyPolygon));
+        aTransform.translate(aTranslate.getX() - aCurrentRange.getMinX(), aTranslate.getY() - aCurrentRange.getMinY());
+    }
+
+    // transform polygon and trigger change
+    aNewPolyPolygon.transform(aTransform);
+    SetPathPoly(aNewPolyPolygon);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdorect.cxx b/svx/source/svdraw/svdorect.cxx
new file mode 100644
index 000000000..0c6481893
--- /dev/null
+++ b/svx/source/svdraw/svdorect.cxx
@@ -0,0 +1,583 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdorect.hxx>
+#include <svx/xpoly.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdview.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <sdr/properties/rectangleproperties.hxx>
+#include <sdr/contact/viewcontactofsdrrectobj.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <tools/debug.hxx>
+#include <vcl/ptrstyle.hxx>
+
+using namespace com::sun::star;
+
+// BaseProperties section
+
+std::unique_ptr<sdr::properties::BaseProperties> SdrRectObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::RectangleProperties>(*this);
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrRectObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrRectObj>(*this);
+}
+
+
+SdrRectObj::SdrRectObj(SdrModel& rSdrModel)
+:   SdrTextObj(rSdrModel)
+{
+    bClosedObj=true;
+}
+
+SdrRectObj::SdrRectObj(
+    SdrModel& rSdrModel,
+    const tools::Rectangle& rRect)
+:   SdrTextObj(rSdrModel, rRect)
+{
+    bClosedObj=true;
+}
+
+SdrRectObj::SdrRectObj(
+    SdrModel& rSdrModel,
+    SdrObjKind eNewTextKind)
+:   SdrTextObj(rSdrModel, eNewTextKind)
+{
+    DBG_ASSERT(eTextKind==OBJ_TEXT ||
+               eTextKind==OBJ_OUTLINETEXT || eTextKind==OBJ_TITLETEXT,
+               "SdrRectObj::SdrRectObj(SdrObjKind) can only be applied to text frames.");
+    bClosedObj=true;
+}
+
+SdrRectObj::SdrRectObj(
+    SdrModel& rSdrModel,
+    SdrObjKind eNewTextKind,
+    const tools::Rectangle& rRect)
+:   SdrTextObj(rSdrModel, eNewTextKind, rRect)
+{
+    DBG_ASSERT(eTextKind==OBJ_TEXT ||
+               eTextKind==OBJ_OUTLINETEXT || eTextKind==OBJ_TITLETEXT,
+               "SdrRectObj::SdrRectObj(SdrObjKind,...) can only be applied to text frames.");
+    bClosedObj=true;
+}
+
+SdrRectObj::~SdrRectObj()
+{
+}
+
+void SdrRectObj::SetXPolyDirty()
+{
+    mpXPoly.reset();
+}
+
+XPolygon SdrRectObj::ImpCalcXPoly(const tools::Rectangle& rRect1, long nRad1) const
+{
+    XPolygon aXPoly(rRect1,nRad1,nRad1);
+    const sal_uInt16 nPointCnt(aXPoly.GetPointCount());
+    XPolygon aNewPoly(nPointCnt+1);
+    sal_uInt16 nShift=nPointCnt-2;
+    if (nRad1!=0) nShift=nPointCnt-5;
+    sal_uInt16 j=nShift;
+    for (sal_uInt16 i=1; i<nPointCnt; i++) {
+        aNewPoly[i]=aXPoly[j];
+        aNewPoly.SetFlags(i,aXPoly.GetFlags(j));
+        j++;
+        if (j>=nPointCnt) j=1;
+    }
+    aNewPoly[0]=rRect1.BottomCenter();
+    aNewPoly[nPointCnt]=aNewPoly[0];
+    aXPoly=aNewPoly;
+
+    // these angles always relate to the top left corner of aRect
+    if (aGeo.nShearAngle!=0) ShearXPoly(aXPoly,maRect.TopLeft(),aGeo.nTan);
+    if (aGeo.nRotationAngle!=0) RotateXPoly(aXPoly,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+    return aXPoly;
+}
+
+void SdrRectObj::RecalcXPoly()
+{
+    mpXPoly.reset( new XPolygon(ImpCalcXPoly(maRect,GetEckenradius())) );
+}
+
+const XPolygon& SdrRectObj::GetXPoly() const
+{
+    if(!mpXPoly)
+    {
+        const_cast<SdrRectObj*>(this)->RecalcXPoly();
+    }
+
+    return *mpXPoly;
+}
+
+void SdrRectObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    bool bNoTextFrame=!IsTextFrame();
+    rInfo.bResizeFreeAllowed=bNoTextFrame || aGeo.nRotationAngle%9000==0;
+    rInfo.bResizePropAllowed=true;
+    rInfo.bRotateFreeAllowed=true;
+    rInfo.bRotate90Allowed  =true;
+    rInfo.bMirrorFreeAllowed=bNoTextFrame;
+    rInfo.bMirror45Allowed  =bNoTextFrame;
+    rInfo.bMirror90Allowed  =bNoTextFrame;
+
+    // allow transparency
+    rInfo.bTransparenceAllowed = true;
+
+    rInfo.bShearAllowed     =bNoTextFrame;
+    rInfo.bEdgeRadiusAllowed=true;
+
+    bool bCanConv=!HasText() || ImpCanConvTextToCurve();
+    if (bCanConv && !bNoTextFrame && !HasText()) {
+        bCanConv=HasFill() || HasLine();
+    }
+    rInfo.bCanConvToPath    =bCanConv;
+    rInfo.bCanConvToPoly    =bCanConv;
+    rInfo.bCanConvToContour = (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary());
+}
+
+sal_uInt16 SdrRectObj::GetObjIdentifier() const
+{
+    if (IsTextFrame()) return sal_uInt16(eTextKind);
+    else return sal_uInt16(OBJ_RECT);
+}
+
+void SdrRectObj::TakeUnrotatedSnapRect(tools::Rectangle& rRect) const
+{
+    rRect = maRect;
+    if (aGeo.nShearAngle!=0)
+    {
+        long nDst=FRound((maRect.Bottom()-maRect.Top())*aGeo.nTan);
+        if (aGeo.nShearAngle>0)
+        {
+            Point aRef(rRect.TopLeft());
+            rRect.AdjustLeft( -nDst );
+            Point aTmpPt(rRect.TopLeft());
+            RotatePoint(aTmpPt,aRef,aGeo.nSin,aGeo.nCos);
+            aTmpPt-=rRect.TopLeft();
+            rRect.Move(aTmpPt.X(),aTmpPt.Y());
+        }
+        else
+        {
+            rRect.AdjustRight( -nDst );
+        }
+    }
+}
+
+OUString SdrRectObj::TakeObjNameSingul() const
+{
+    if (IsTextFrame())
+    {
+        return SdrTextObj::TakeObjNameSingul();
+    }
+
+    OUStringBuffer sName;
+
+    bool bRounded = GetEckenradius() != 0; // rounded down
+    const char* pResId = bRounded ? STR_ObjNameSingulRECTRND : STR_ObjNameSingulRECT;
+    if (aGeo.nShearAngle!=0)
+    {
+        pResId = bRounded ? STR_ObjNameSingulPARALRND : STR_ObjNameSingulPARAL;  // parallelogram or, maybe, rhombus
+    }
+    else if (maRect.GetWidth() == maRect.GetHeight())
+    {
+        pResId = bRounded ? STR_ObjNameSingulQUADRND : STR_ObjNameSingulQUAD; // square
+    }
+    sName.append(SvxResId(pResId));
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrRectObj::TakeObjNamePlural() const
+{
+    if (IsTextFrame())
+    {
+        return SdrTextObj::TakeObjNamePlural();
+    }
+
+    bool bRounded = GetEckenradius() != 0; // rounded down
+    const char* pResId = bRounded ? STR_ObjNamePluralRECTRND : STR_ObjNamePluralRECT;
+    if (aGeo.nShearAngle!=0)
+    {
+        pResId = bRounded ? STR_ObjNamePluralPARALRND : STR_ObjNamePluralPARAL;  // parallelogram or rhombus
+    }
+    else if (maRect.GetWidth() == maRect.GetHeight())
+    {
+        pResId = bRounded ? STR_ObjNamePluralQUADRND : STR_ObjNamePluralQUAD; // square
+    }
+
+    return SvxResId(pResId);
+}
+
+SdrRectObj* SdrRectObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrRectObj >(rTargetModel);
+}
+
+SdrRectObj& SdrRectObj::operator=(const SdrRectObj& rCopy)
+{
+    if ( this == &rCopy )
+        return *this;
+
+    SdrTextObj::operator=( rCopy );
+
+    if ( rCopy.mpXPoly )
+        mpXPoly.reset( new XPolygon( *rCopy.mpXPoly ) );
+    else
+        mpXPoly.reset();
+
+    return *this;
+}
+
+basegfx::B2DPolyPolygon SdrRectObj::TakeXorPoly() const
+{
+    XPolyPolygon aXPP;
+    aXPP.Insert(ImpCalcXPoly(maRect,GetEckenradius()));
+    return aXPP.getB2DPolyPolygon();
+}
+
+void SdrRectObj::RecalcSnapRect()
+{
+    long nEckRad=GetEckenradius();
+    if ((aGeo.nRotationAngle!=0 || aGeo.nShearAngle!=0) && nEckRad!=0) {
+        maSnapRect=GetXPoly().GetBoundRect();
+    } else {
+        SdrTextObj::RecalcSnapRect();
+    }
+}
+
+void SdrRectObj::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    SdrTextObj::NbcSetSnapRect(rRect);
+    SetXPolyDirty();
+}
+
+void SdrRectObj::NbcSetLogicRect(const tools::Rectangle& rRect)
+{
+    SdrTextObj::NbcSetLogicRect(rRect);
+    SetXPolyDirty();
+}
+
+sal_uInt32 SdrRectObj::GetHdlCount() const
+{
+    return IsTextFrame() ? 10 : 9;
+}
+
+void SdrRectObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    // A text box has an additional (pseudo-)handle for the blinking frame.
+    if(IsTextFrame())
+    {
+        OSL_ENSURE(!IsTextEditActive(), "Do not use an ImpTextframeHdl for highlighting text in active text edit, this will collide with EditEngine paints (!)");
+        std::unique_ptr<SdrHdl> pH(new ImpTextframeHdl(maRect));
+        pH->SetObj(const_cast<SdrRectObj*>(this));
+        pH->SetRotationAngle(aGeo.nRotationAngle);
+        rHdlList.AddHdl(std::move(pH));
+    }
+
+    for(sal_Int32 nHdlNum = 1; nHdlNum <= 9; ++nHdlNum)
+    {
+        Point aPnt;
+        SdrHdlKind eKind = SdrHdlKind::Move;
+
+        switch(nHdlNum)
+        {
+            case 1: // Handle for changing the corner radius
+            {
+                long a = GetEckenradius();
+                long b = std::max(maRect.GetWidth(),maRect.GetHeight())/2; // rounded up, because GetWidth() adds 1
+                if (a>b) a=b;
+                if (a<0) a=0;
+                aPnt=maRect.TopLeft();
+                aPnt.AdjustX(a );
+                eKind = SdrHdlKind::Circle;
+                break;
+            }
+            case 2: aPnt=maRect.TopLeft();      eKind = SdrHdlKind::UpperLeft; break;
+            case 3: aPnt=maRect.TopCenter();    eKind = SdrHdlKind::Upper; break;
+            case 4: aPnt=maRect.TopRight();     eKind = SdrHdlKind::UpperRight; break;
+            case 5: aPnt=maRect.LeftCenter();   eKind = SdrHdlKind::Left ; break;
+            case 6: aPnt=maRect.RightCenter();  eKind = SdrHdlKind::Right; break;
+            case 7: aPnt=maRect.BottomLeft();   eKind = SdrHdlKind::LowerLeft; break;
+            case 8: aPnt=maRect.BottomCenter(); eKind = SdrHdlKind::Lower; break;
+            case 9: aPnt=maRect.BottomRight();  eKind = SdrHdlKind::LowerRight; break;
+        }
+
+        if(aGeo.nShearAngle)
+        {
+            ShearPoint(aPnt,maRect.TopLeft(),aGeo.nTan);
+        }
+        if(aGeo.nRotationAngle)
+        {
+            RotatePoint(aPnt,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+        }
+
+        std::unique_ptr<SdrHdl> pH(new SdrHdl(aPnt,eKind));
+        pH->SetObj(const_cast<SdrRectObj*>(this));
+        pH->SetRotationAngle(aGeo.nRotationAngle);
+        rHdlList.AddHdl(std::move(pH));
+    }
+}
+
+bool SdrRectObj::hasSpecialDrag() const
+{
+    return true;
+}
+
+bool SdrRectObj::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    const bool bRad(rDrag.GetHdl() && SdrHdlKind::Circle == rDrag.GetHdl()->GetKind());
+
+    if(bRad)
+    {
+        rDrag.SetEndDragChangesAttributes(true);
+
+        return true;
+    }
+
+    return SdrTextObj::beginSpecialDrag(rDrag);
+}
+
+bool SdrRectObj::applySpecialDrag(SdrDragStat& rDrag)
+{
+    const bool bRad(rDrag.GetHdl() && SdrHdlKind::Circle == rDrag.GetHdl()->GetKind());
+
+    if (bRad)
+    {
+        Point aPt(rDrag.GetNow());
+
+        if(aGeo.nRotationAngle)
+            RotatePoint(aPt,maRect.TopLeft(),-aGeo.nSin,aGeo.nCos);
+
+        sal_Int32 nRad(aPt.X() - maRect.Left());
+
+        if (nRad < 0)
+            nRad = 0;
+
+        if(nRad != GetEckenradius())
+        {
+            NbcSetEckenradius(nRad);
+        }
+
+        return true;
+    }
+    else
+    {
+        return SdrTextObj::applySpecialDrag(rDrag);
+    }
+}
+
+OUString SdrRectObj::getSpecialDragComment(const SdrDragStat& rDrag) const
+{
+    const bool bCreateComment(rDrag.GetView() && this == rDrag.GetView()->GetCreateObj());
+
+    if(bCreateComment)
+    {
+        return OUString();
+    }
+    else
+    {
+        const bool bRad(rDrag.GetHdl() && SdrHdlKind::Circle == rDrag.GetHdl()->GetKind());
+
+        if(bRad)
+        {
+            Point aPt(rDrag.GetNow());
+
+            // -sin for reversal
+            if(aGeo.nRotationAngle)
+                RotatePoint(aPt, maRect.TopLeft(), -aGeo.nSin, aGeo.nCos);
+
+            sal_Int32 nRad(aPt.X() - maRect.Left());
+
+            if(nRad < 0)
+                nRad = 0;
+
+            OUStringBuffer aBuf(ImpGetDescriptionStr(STR_DragRectEckRad));
+            aBuf.append(" (");
+            aBuf.append(GetMetrStr(nRad));
+            aBuf.append(')');
+
+            return aBuf.makeStringAndClear();
+        }
+        else
+        {
+            return SdrTextObj::getSpecialDragComment(rDrag);
+        }
+    }
+}
+
+
+basegfx::B2DPolyPolygon SdrRectObj::TakeCreatePoly(const SdrDragStat& rDrag) const
+{
+    tools::Rectangle aRect1;
+    rDrag.TakeCreateRect(aRect1);
+    aRect1.Justify();
+
+    basegfx::B2DPolyPolygon aRetval;
+    aRetval.append(ImpCalcXPoly(aRect1,GetEckenradius()).getB2DPolygon());
+    return aRetval;
+}
+
+PointerStyle SdrRectObj::GetCreatePointer() const
+{
+    if (IsTextFrame()) return PointerStyle::DrawText;
+    return PointerStyle::DrawRect;
+}
+
+void SdrRectObj::NbcMove(const Size& rSiz)
+{
+    SdrTextObj::NbcMove(rSiz);
+    SetXPolyDirty();
+}
+
+void SdrRectObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    SdrTextObj::NbcResize(rRef,xFact,yFact);
+    SetXPolyDirty();
+}
+
+void SdrRectObj::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    SdrTextObj::NbcRotate(rRef,nAngle,sn,cs);
+    SetXPolyDirty();
+}
+
+void SdrRectObj::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    SdrTextObj::NbcShear(rRef,nAngle,tn,bVShear);
+    SetXPolyDirty();
+}
+
+void SdrRectObj::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    SdrTextObj::NbcMirror(rRef1,rRef2);
+    SetXPolyDirty();
+}
+
+SdrGluePoint SdrRectObj::GetVertexGluePoint(sal_uInt16 nPosNum) const
+{
+    sal_Int32 nWdt = ImpGetLineWdt(); // #i25616#
+
+    // #i25616#
+    if(!LineIsOutsideGeometry())
+    {
+        nWdt++;
+        nWdt /= 2;
+    }
+
+    Point aPt;
+    switch (nPosNum) {
+        case 0: aPt=maRect.TopCenter();    aPt.AdjustY( -nWdt ); break;
+        case 1: aPt=maRect.RightCenter();  aPt.AdjustX(nWdt ); break;
+        case 2: aPt=maRect.BottomCenter(); aPt.AdjustY(nWdt ); break;
+        case 3: aPt=maRect.LeftCenter();   aPt.AdjustX( -nWdt ); break;
+    }
+    if (aGeo.nShearAngle!=0) ShearPoint(aPt,maRect.TopLeft(),aGeo.nTan);
+    if (aGeo.nRotationAngle!=0) RotatePoint(aPt,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+    aPt-=GetSnapRect().Center();
+    SdrGluePoint aGP(aPt);
+    aGP.SetPercent(false);
+    return aGP;
+}
+
+SdrGluePoint SdrRectObj::GetCornerGluePoint(sal_uInt16 nPosNum) const
+{
+    sal_Int32 nWdt = ImpGetLineWdt(); // #i25616#
+
+    // #i25616#
+    if(!LineIsOutsideGeometry())
+    {
+        nWdt++;
+        nWdt /= 2;
+    }
+
+    Point aPt;
+    switch (nPosNum) {
+        case 0: aPt=maRect.TopLeft();     aPt.AdjustX( -nWdt ); aPt.AdjustY( -nWdt ); break;
+        case 1: aPt=maRect.TopRight();    aPt.AdjustX(nWdt ); aPt.AdjustY( -nWdt ); break;
+        case 2: aPt=maRect.BottomRight(); aPt.AdjustX(nWdt ); aPt.AdjustY(nWdt ); break;
+        case 3: aPt=maRect.BottomLeft();  aPt.AdjustX( -nWdt ); aPt.AdjustY(nWdt ); break;
+    }
+    if (aGeo.nShearAngle!=0) ShearPoint(aPt,maRect.TopLeft(),aGeo.nTan);
+    if (aGeo.nRotationAngle!=0) RotatePoint(aPt,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+    aPt-=GetSnapRect().Center();
+    SdrGluePoint aGP(aPt);
+    aGP.SetPercent(false);
+    return aGP;
+}
+
+SdrObjectUniquePtr SdrRectObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    XPolygon aXP(ImpCalcXPoly(maRect,GetEckenradius()));
+    { // TODO: this is only for the moment, until we have the new TakeContour()
+        aXP.Remove(0,1);
+        aXP[aXP.GetPointCount()-1]=aXP[0];
+    }
+
+    basegfx::B2DPolyPolygon aPolyPolygon(aXP.getB2DPolygon());
+    aPolyPolygon.removeDoublePoints();
+    SdrObjectUniquePtr pRet;
+
+    // small correction: Do not create something when no fill and no line. To
+    // be sure to not damage something with non-text frames, do this only
+    // when used with bAddText==false from other converters
+    if((bAddText && !IsTextFrame()) || HasFill() || HasLine())
+    {
+        pRet = ImpConvertMakeObj(aPolyPolygon, true, bBezier);
+    }
+
+    if(bAddText)
+    {
+        pRet = ImpConvertAddText(std::move(pRet), bBezier);
+    }
+
+    return pRet;
+}
+
+void SdrRectObj::Notify(SfxBroadcaster& rBC, const SfxHint& rHint)
+{
+    SdrTextObj::Notify(rBC,rHint);
+    SetXPolyDirty(); // because of the corner radius
+}
+
+void SdrRectObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    SdrTextObj::RestGeoData(rGeo);
+    SetXPolyDirty();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotext.cxx b/svx/source/svdraw/svdotext.cxx
new file mode 100644
index 000000000..3c2923c9c
--- /dev/null
+++ b/svx/source/svdraw/svdotext.cxx
@@ -0,0 +1,2157 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <comphelper/string.hxx>
+#include <svl/stritem.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <editeng/writingmodeitem.hxx>
+#include <svx/sdtfchim.hxx>
+#include <editeng/editdata.hxx>
+#include <editeng/editstat.hxx>
+#include <editeng/outlobj.hxx>
+#include <editeng/editobj.hxx>
+#include <editeng/outliner.hxx>
+#include <textchain.hxx>
+#include <textchainflow.hxx>
+#include <tools/helpers.hxx>
+#include <svx/sderitm.hxx>
+#include <svx/sdooitm.hxx>
+#include <svx/sdshitm.hxx>
+#include <svx/sdtagitm.hxx>
+#include <svx/sdtfsitm.hxx>
+#include <svx/sdtmfitm.hxx>
+#include <svx/xtextit0.hxx>
+#include <sdr/properties/textproperties.hxx>
+#include <sdr/contact/viewcontactoftextobj.hxx>
+#include <basegfx/tuple/b2dtuple.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <vcl/gdimtf.hxx>
+#include <vcl/virdev.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <sal/log.hxx>
+
+using namespace com::sun::star;
+
+// BaseProperties section
+std::unique_ptr<sdr::properties::BaseProperties> SdrTextObj::CreateObjectSpecificProperties()
+{
+    return std::make_unique<sdr::properties::TextProperties>(*this);
+}
+
+// DrawContact section
+std::unique_ptr<sdr::contact::ViewContact> SdrTextObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfTextObj>(*this);
+}
+
+SdrTextObj::SdrTextObj(SdrModel& rSdrModel)
+:   SdrAttrObj(rSdrModel),
+    pEdtOutl(nullptr),
+    eTextKind(OBJ_TEXT)
+{
+    bTextSizeDirty=false;
+    bTextFrame=false;
+    bNoShear=false;
+    bDisableAutoWidthOnDragging=false;
+
+    mbInEditMode = false;
+    mbTextAnimationAllowed = true;
+    maTextEditOffset = Point(0, 0);
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = true;
+    mbInDownScale = false;
+}
+
+SdrTextObj::SdrTextObj(
+    SdrModel& rSdrModel,
+    const tools::Rectangle& rNewRect)
+:   SdrAttrObj(rSdrModel),
+    maRect(rNewRect),
+    pEdtOutl(nullptr),
+    eTextKind(OBJ_TEXT)
+{
+    bTextSizeDirty=false;
+    bTextFrame=false;
+    bNoShear=false;
+    bDisableAutoWidthOnDragging=false;
+    ImpJustifyRect(maRect);
+
+    mbInEditMode = false;
+    mbTextAnimationAllowed = true;
+    mbInDownScale = false;
+    maTextEditOffset = Point(0, 0);
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = true;
+}
+
+SdrTextObj::SdrTextObj(
+    SdrModel& rSdrModel,
+    SdrObjKind eNewTextKind)
+:   SdrAttrObj(rSdrModel),
+    pEdtOutl(nullptr),
+    eTextKind(eNewTextKind)
+{
+    bTextSizeDirty=false;
+    bTextFrame=true;
+    bNoShear=true;
+    bDisableAutoWidthOnDragging=false;
+
+    mbInEditMode = false;
+    mbTextAnimationAllowed = true;
+    mbInDownScale = false;
+    maTextEditOffset = Point(0, 0);
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = true;
+}
+
+SdrTextObj::SdrTextObj(
+    SdrModel& rSdrModel,
+    SdrObjKind eNewTextKind,
+    const tools::Rectangle& rNewRect)
+:   SdrAttrObj(rSdrModel),
+    maRect(rNewRect),
+    pEdtOutl(nullptr),
+    eTextKind(eNewTextKind)
+{
+    bTextSizeDirty=false;
+    bTextFrame=true;
+    bNoShear=true;
+    bDisableAutoWidthOnDragging=false;
+    ImpJustifyRect(maRect);
+
+    mbInEditMode = false;
+    mbTextAnimationAllowed = true;
+    mbInDownScale = false;
+    maTextEditOffset = Point(0, 0);
+
+    // #i25616#
+    mbSupportTextIndentingOnLineWidthChange = true;
+}
+
+SdrTextObj::~SdrTextObj()
+{
+    SdrOutliner& rOutl(getSdrModelFromSdrObject().GetHitTestOutliner());
+    if( rOutl.GetTextObj() == this )
+        rOutl.SetTextObj( nullptr );
+    mpText.reset();
+    ImpDeregisterLink();
+}
+
+void SdrTextObj::FitFrameToTextSize()
+{
+    ImpJustifyRect(maRect);
+
+    SdrText* pText = getActiveText();
+    if(pText==nullptr || !pText->GetOutlinerParaObject())
+        return;
+
+    SdrOutliner& rOutliner=ImpGetDrawOutliner();
+    rOutliner.SetPaperSize(Size(maRect.Right()-maRect.Left(),maRect.Bottom()-maRect.Top()));
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetText(*pText->GetOutlinerParaObject());
+    Size aNewSize(rOutliner.CalcTextSize());
+    rOutliner.Clear();
+    aNewSize.AdjustWidth( 1 ); // because of possible rounding errors
+    aNewSize.AdjustWidth(GetTextLeftDistance()+GetTextRightDistance() );
+    aNewSize.AdjustHeight(GetTextUpperDistance()+GetTextLowerDistance() );
+    tools::Rectangle aNewRect(maRect);
+    aNewRect.SetSize(aNewSize);
+    ImpJustifyRect(aNewRect);
+    if (aNewRect!=maRect) {
+        SetLogicRect(aNewRect);
+    }
+}
+
+void SdrTextObj::NbcSetText(const OUString& rStr)
+{
+    SdrOutliner& rOutliner=ImpGetDrawOutliner();
+    rOutliner.SetStyleSheet( 0, GetStyleSheet());
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetText(rStr,rOutliner.GetParagraph( 0 ));
+    std::unique_ptr<OutlinerParaObject> pNewText=rOutliner.CreateParaObject();
+    Size aSiz(rOutliner.CalcTextSize());
+    rOutliner.Clear();
+    NbcSetOutlinerParaObject(std::move(pNewText));
+    aTextSize=aSiz;
+    bTextSizeDirty=false;
+}
+
+void SdrTextObj::SetText(const OUString& rStr)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcSetText(rStr);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrTextObj::NbcSetText(SvStream& rInput, const OUString& rBaseURL, EETextFormat eFormat)
+{
+    SdrOutliner& rOutliner=ImpGetDrawOutliner();
+    rOutliner.SetStyleSheet( 0, GetStyleSheet());
+    rOutliner.Read(rInput,rBaseURL,eFormat);
+    std::unique_ptr<OutlinerParaObject> pNewText=rOutliner.CreateParaObject();
+    rOutliner.SetUpdateMode(true);
+    Size aSiz(rOutliner.CalcTextSize());
+    rOutliner.Clear();
+    NbcSetOutlinerParaObject(std::move(pNewText));
+    aTextSize=aSiz;
+    bTextSizeDirty=false;
+}
+
+void SdrTextObj::SetText(SvStream& rInput, const OUString& rBaseURL, EETextFormat eFormat)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    NbcSetText(rInput,rBaseURL,eFormat);
+    SetChanged();
+    BroadcastObjectChange();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+const Size& SdrTextObj::GetTextSize() const
+{
+    if (bTextSizeDirty)
+    {
+        Size aSiz;
+        SdrText* pText = getActiveText();
+        if( pText && pText->GetOutlinerParaObject ())
+        {
+            SdrOutliner& rOutliner=ImpGetDrawOutliner();
+            rOutliner.SetText(*pText->GetOutlinerParaObject());
+            rOutliner.SetUpdateMode(true);
+            aSiz=rOutliner.CalcTextSize();
+            rOutliner.Clear();
+        }
+        // casting to nonconst twice
+        const_cast<SdrTextObj*>(this)->aTextSize=aSiz;
+        const_cast<SdrTextObj*>(this)->bTextSizeDirty=false;
+    }
+    return aTextSize;
+}
+
+bool SdrTextObj::IsAutoGrowHeight() const
+{
+    if(!bTextFrame)
+        return false; // AutoGrow only together with TextFrames
+
+    const SfxItemSet& rSet = GetObjectItemSet();
+    bool bRet = rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue();
+
+    if(bRet)
+    {
+        SdrTextAniKind eAniKind = rSet.Get(SDRATTR_TEXT_ANIKIND).GetValue();
+
+        if(eAniKind == SdrTextAniKind::Scroll || eAniKind == SdrTextAniKind::Alternate || eAniKind == SdrTextAniKind::Slide)
+        {
+            SdrTextAniDirection eDirection = rSet.Get(SDRATTR_TEXT_ANIDIRECTION).GetValue();
+
+            if(eDirection == SdrTextAniDirection::Up || eDirection == SdrTextAniDirection::Down)
+            {
+                bRet = false;
+            }
+        }
+    }
+    return bRet;
+}
+
+bool SdrTextObj::IsAutoGrowWidth() const
+{
+    if(!bTextFrame)
+        return false; // AutoGrow only together with TextFrames
+
+    const SfxItemSet& rSet = GetObjectItemSet();
+    bool bRet = rSet.Get(SDRATTR_TEXT_AUTOGROWWIDTH).GetValue();
+
+    bool bInEditMOde = IsInEditMode();
+
+    if(!bInEditMOde && bRet)
+    {
+        SdrTextAniKind eAniKind = rSet.Get(SDRATTR_TEXT_ANIKIND).GetValue();
+
+        if(eAniKind == SdrTextAniKind::Scroll || eAniKind == SdrTextAniKind::Alternate || eAniKind == SdrTextAniKind::Slide)
+        {
+            SdrTextAniDirection eDirection = rSet.Get(SDRATTR_TEXT_ANIDIRECTION).GetValue();
+
+            if(eDirection == SdrTextAniDirection::Left || eDirection == SdrTextAniDirection::Right)
+            {
+                bRet = false;
+            }
+        }
+    }
+    return bRet;
+}
+
+SdrTextHorzAdjust SdrTextObj::GetTextHorizontalAdjust() const
+{
+    return GetTextHorizontalAdjust(GetObjectItemSet());
+}
+
+SdrTextHorzAdjust SdrTextObj::GetTextHorizontalAdjust(const SfxItemSet& rSet) const
+{
+    if(IsContourTextFrame())
+        return SDRTEXTHORZADJUST_BLOCK;
+
+    SdrTextHorzAdjust eRet = rSet.Get(SDRATTR_TEXT_HORZADJUST).GetValue();
+
+    bool bInEditMode = IsInEditMode();
+
+    if(!bInEditMode && eRet == SDRTEXTHORZADJUST_BLOCK)
+    {
+        SdrTextAniKind eAniKind = rSet.Get(SDRATTR_TEXT_ANIKIND).GetValue();
+
+        if(eAniKind == SdrTextAniKind::Scroll || eAniKind == SdrTextAniKind::Alternate || eAniKind == SdrTextAniKind::Slide)
+        {
+            SdrTextAniDirection eDirection = rSet.Get(SDRATTR_TEXT_ANIDIRECTION).GetValue();
+
+            if(eDirection == SdrTextAniDirection::Left || eDirection == SdrTextAniDirection::Right)
+            {
+                eRet = SDRTEXTHORZADJUST_LEFT;
+            }
+        }
+    }
+
+    return eRet;
+} // defaults: BLOCK (justify) for text frame, CENTER for captions of drawing objects
+
+SdrTextVertAdjust SdrTextObj::GetTextVerticalAdjust() const
+{
+    return GetTextVerticalAdjust(GetObjectItemSet());
+}
+
+SdrTextVertAdjust SdrTextObj::GetTextVerticalAdjust(const SfxItemSet& rSet) const
+{
+    if(IsContourTextFrame())
+        return SDRTEXTVERTADJUST_TOP;
+
+    // Take care for vertical text animation here
+    SdrTextVertAdjust eRet = rSet.Get(SDRATTR_TEXT_VERTADJUST).GetValue();
+    bool bInEditMode = IsInEditMode();
+
+    // Take care for vertical text animation here
+    if(!bInEditMode && eRet == SDRTEXTVERTADJUST_BLOCK)
+    {
+        SdrTextAniKind eAniKind = rSet.Get(SDRATTR_TEXT_ANIKIND).GetValue();
+
+        if(eAniKind == SdrTextAniKind::Scroll || eAniKind == SdrTextAniKind::Alternate || eAniKind == SdrTextAniKind::Slide)
+        {
+            SdrTextAniDirection eDirection = rSet.Get(SDRATTR_TEXT_ANIDIRECTION).GetValue();
+
+            if(eDirection == SdrTextAniDirection::Left || eDirection == SdrTextAniDirection::Right)
+            {
+                eRet = SDRTEXTVERTADJUST_TOP;
+            }
+        }
+    }
+
+    return eRet;
+} // defaults: TOP for text frame, CENTER for captions of drawing objects
+
+void SdrTextObj::ImpJustifyRect(tools::Rectangle& rRect)
+{
+    if (!rRect.IsEmpty()) {
+        rRect.Justify();
+        if (rRect.Left()==rRect.Right()) rRect.AdjustRight( 1 );
+        if (rRect.Top()==rRect.Bottom()) rRect.AdjustBottom( 1 );
+    }
+}
+
+void SdrTextObj::ImpCheckShear()
+{
+    if (bNoShear && aGeo.nShearAngle!=0) {
+        aGeo.nShearAngle=0;
+        aGeo.nTan=0;
+    }
+}
+
+void SdrTextObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    bool bNoTextFrame=!IsTextFrame();
+    rInfo.bResizeFreeAllowed=bNoTextFrame || aGeo.nRotationAngle%9000==0;
+    rInfo.bResizePropAllowed=true;
+    rInfo.bRotateFreeAllowed=true;
+    rInfo.bRotate90Allowed  =true;
+    rInfo.bMirrorFreeAllowed=bNoTextFrame;
+    rInfo.bMirror45Allowed  =bNoTextFrame;
+    rInfo.bMirror90Allowed  =bNoTextFrame;
+
+    // allow transparency
+    rInfo.bTransparenceAllowed = true;
+
+    rInfo.bShearAllowed     =bNoTextFrame;
+    rInfo.bEdgeRadiusAllowed=true;
+    bool bCanConv=ImpCanConvTextToCurve();
+    rInfo.bCanConvToPath    =bCanConv;
+    rInfo.bCanConvToPoly    =bCanConv;
+    rInfo.bCanConvToPathLineToArea=bCanConv;
+    rInfo.bCanConvToPolyLineToArea=bCanConv;
+    rInfo.bCanConvToContour = (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary());
+}
+
+sal_uInt16 SdrTextObj::GetObjIdentifier() const
+{
+    return sal_uInt16(eTextKind);
+}
+
+bool SdrTextObj::HasTextImpl( SdrOutliner const * pOutliner )
+{
+    bool bRet=false;
+    if(pOutliner)
+    {
+        Paragraph* p1stPara=pOutliner->GetParagraph( 0 );
+        sal_Int32 nParaCount=pOutliner->GetParagraphCount();
+        if(p1stPara==nullptr)
+            nParaCount=0;
+
+        if(nParaCount==1)
+        {
+            // if it is only one paragraph, check if that paragraph is empty
+            if( pOutliner->GetText(p1stPara).isEmpty() )
+                nParaCount = 0;
+        }
+
+        bRet= nParaCount!=0;
+    }
+    return bRet;
+}
+
+void SdrTextObj::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage)
+{
+    const bool bRemove(pNewPage == nullptr && pOldPage != nullptr);
+    const bool bInsert(pNewPage != nullptr && pOldPage == nullptr);
+    const bool bLinked(IsLinkedText());
+
+    if (bLinked && bRemove)
+    {
+        ImpDeregisterLink();
+    }
+
+    // call parent
+    SdrAttrObj::handlePageChange(pOldPage, pNewPage);
+
+    if (bLinked && bInsert)
+    {
+        ImpRegisterLink();
+    }
+}
+
+void SdrTextObj::NbcSetEckenradius(long nRad)
+{
+    SetObjectItem(makeSdrEckenradiusItem(nRad));
+}
+
+// #115391# This implementation is based on the object size (aRect) and the
+// states of IsAutoGrowWidth/Height to correctly set TextMinFrameWidth/Height
+void SdrTextObj::AdaptTextMinSize()
+{
+    if (!bTextFrame)
+        // Only do this for text frame.
+        return;
+
+    if (getSdrModelFromSdrObject().IsPasteResize())
+        // Don't do this during paste resize.
+        return;
+
+    const bool bW = IsAutoGrowWidth();
+    const bool bH = IsAutoGrowHeight();
+
+    if (!bW && !bH)
+        // No auto grow requested.  Bail out.
+        return;
+
+    SfxItemSet aSet(
+        *GetObjectItemSet().GetPool(),
+        svl::Items<SDRATTR_TEXT_MINFRAMEHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT,
+        SDRATTR_TEXT_MINFRAMEWIDTH, SDRATTR_TEXT_AUTOGROWWIDTH>{}); // contains SDRATTR_TEXT_MAXFRAMEWIDTH
+
+    if(bW)
+    {
+        // Set minimum width.
+        const long nDist = GetTextLeftDistance() + GetTextRightDistance();
+        const long nW = std::max<long>(0, maRect.GetWidth() - 1 - nDist); // text width without margins
+
+        aSet.Put(makeSdrTextMinFrameWidthItem(nW));
+
+        if(!IsVerticalWriting() && bDisableAutoWidthOnDragging)
+        {
+            bDisableAutoWidthOnDragging = true;
+            aSet.Put(makeSdrTextAutoGrowWidthItem(false));
+        }
+    }
+
+    if(bH)
+    {
+        // Set Minimum height.
+        const long nDist = GetTextUpperDistance() + GetTextLowerDistance();
+        const long nH = std::max<long>(0, maRect.GetHeight() - 1 - nDist); // text height without margins
+
+        aSet.Put(makeSdrTextMinFrameHeightItem(nH));
+
+        if(IsVerticalWriting() && bDisableAutoWidthOnDragging)
+        {
+            bDisableAutoWidthOnDragging = false;
+            aSet.Put(makeSdrTextAutoGrowHeightItem(false));
+        }
+    }
+
+    SetObjectItemSet(aSet);
+}
+
+void SdrTextObj::ImpSetContourPolygon( SdrOutliner& rOutliner, tools::Rectangle const & rAnchorRect, bool bLineWidth ) const
+{
+    basegfx::B2DPolyPolygon aXorPolyPolygon(TakeXorPoly());
+    std::unique_ptr<basegfx::B2DPolyPolygon> pContourPolyPolygon;
+    basegfx::B2DHomMatrix aMatrix(basegfx::utils::createTranslateB2DHomMatrix(
+        -rAnchorRect.Left(), -rAnchorRect.Top()));
+
+    if(aGeo.nRotationAngle)
+    {
+        // Unrotate!
+        aMatrix.rotate(-aGeo.nRotationAngle * F_PI18000);
+    }
+
+    aXorPolyPolygon.transform(aMatrix);
+
+    if( bLineWidth )
+    {
+        // Take line width into account.
+        // When doing the hit test, avoid this. (Performance!)
+        pContourPolyPolygon.reset(new basegfx::B2DPolyPolygon());
+
+        // test if shadow needs to be avoided for TakeContour()
+        const SfxItemSet& rSet = GetObjectItemSet();
+        bool bShadowOn = rSet.Get(SDRATTR_SHADOW).GetValue();
+
+        // #i33696#
+        // Remember TextObject currently set at the DrawOutliner, it WILL be
+        // replaced during calculating the outline since it uses an own paint
+        // and that one uses the DrawOutliner, too.
+        const SdrTextObj* pLastTextObject = rOutliner.GetTextObj();
+
+        if(bShadowOn)
+        {
+            // force shadow off
+            SdrObject* pCopy(CloneSdrObject(getSdrModelFromSdrObject()));
+            pCopy->SetMergedItem(makeSdrShadowItem(false));
+            *pContourPolyPolygon = pCopy->TakeContour();
+            SdrObject::Free( pCopy );
+        }
+        else
+        {
+            *pContourPolyPolygon = TakeContour();
+        }
+
+        // #i33696#
+        // restore remembered text object
+        if(pLastTextObject != rOutliner.GetTextObj())
+        {
+            rOutliner.SetTextObj(pLastTextObject);
+        }
+
+        pContourPolyPolygon->transform(aMatrix);
+    }
+
+    rOutliner.SetPolygon(aXorPolyPolygon, pContourPolyPolygon.get());
+}
+
+void SdrTextObj::TakeUnrotatedSnapRect(tools::Rectangle& rRect) const
+{
+    rRect=maRect;
+}
+
+void SdrTextObj::TakeTextAnchorRect(tools::Rectangle& rAnchorRect) const
+{
+    long nLeftDist=GetTextLeftDistance();
+    long nRightDist=GetTextRightDistance();
+    long nUpperDist=GetTextUpperDistance();
+    long nLowerDist=GetTextLowerDistance();
+    tools::Rectangle aAnkRect(maRect); // the rectangle in which we anchor
+    bool bFrame=IsTextFrame();
+    if (!bFrame) {
+        TakeUnrotatedSnapRect(aAnkRect);
+    }
+    Point aRotateRef(aAnkRect.TopLeft());
+    aAnkRect.AdjustLeft(nLeftDist );
+    aAnkRect.AdjustTop(nUpperDist );
+    aAnkRect.AdjustRight( -nRightDist );
+    aAnkRect.AdjustBottom( -nLowerDist );
+
+    // Since sizes may be bigger than the object bounds it is necessary to
+    // justify the rect now.
+    ImpJustifyRect(aAnkRect);
+
+    if (bFrame) {
+        // TODO: Optimize this.
+        if (aAnkRect.GetWidth()<2) aAnkRect.SetRight(aAnkRect.Left()+1 ); // minimum size h and v: 2 px
+        if (aAnkRect.GetHeight()<2) aAnkRect.SetBottom(aAnkRect.Top()+1 );
+    }
+    if (aGeo.nRotationAngle!=0) {
+        Point aTmpPt(aAnkRect.TopLeft());
+        RotatePoint(aTmpPt,aRotateRef,aGeo.nSin,aGeo.nCos);
+        aTmpPt-=aAnkRect.TopLeft();
+        aAnkRect.Move(aTmpPt.X(),aTmpPt.Y());
+    }
+    rAnchorRect=aAnkRect;
+}
+
+void SdrTextObj::TakeTextRect( SdrOutliner& rOutliner, tools::Rectangle& rTextRect, bool bNoEditText,
+                               tools::Rectangle* pAnchorRect, bool bLineWidth ) const
+{
+    tools::Rectangle aAnkRect; // the rectangle in which we anchor
+    TakeTextAnchorRect(aAnkRect);
+    SdrTextVertAdjust eVAdj=GetTextVerticalAdjust();
+    SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust();
+    SdrTextAniKind      eAniKind=GetTextAniKind();
+    SdrTextAniDirection eAniDirection=GetTextAniDirection();
+
+    bool bFitToSize(IsFitToSize());
+    bool bContourFrame=IsContourTextFrame();
+
+    bool bFrame=IsTextFrame();
+    EEControlBits nStat0=rOutliner.GetControlWord();
+    Size aNullSize;
+    if (!bContourFrame)
+    {
+        rOutliner.SetControlWord(nStat0|EEControlBits::AUTOPAGESIZE);
+        rOutliner.SetMinAutoPaperSize(aNullSize);
+        rOutliner.SetMaxAutoPaperSize(Size(1000000,1000000));
+    }
+
+    if (!bFitToSize && !bContourFrame)
+    {
+        long nAnkWdt=aAnkRect.GetWidth();
+        long nAnkHgt=aAnkRect.GetHeight();
+        if (bFrame)
+        {
+            long nWdt=nAnkWdt;
+            long nHgt=nAnkHgt;
+
+            bool bInEditMode = IsInEditMode();
+
+            if (!bInEditMode && (eAniKind==SdrTextAniKind::Scroll || eAniKind==SdrTextAniKind::Alternate || eAniKind==SdrTextAniKind::Slide))
+            {
+                // unlimited paper size for ticker text
+                if (eAniDirection==SdrTextAniDirection::Left || eAniDirection==SdrTextAniDirection::Right) nWdt=1000000;
+                if (eAniDirection==SdrTextAniDirection::Up || eAniDirection==SdrTextAniDirection::Down) nHgt=1000000;
+            }
+
+            bool bChainedFrame = IsChainable();
+            // Might be required for overflow check working: do limit height to frame if box is chainable.
+            if (!bChainedFrame) {
+                // #i119885# Do not limit/force height to geometrical frame (vice versa for vertical writing)
+
+                if(IsVerticalWriting())
+                {
+                    nWdt = 1000000;
+                }
+                else
+                {
+                    nHgt = 1000000;
+                }
+            }
+
+            rOutliner.SetMaxAutoPaperSize(Size(nWdt,nHgt));
+        }
+
+        // New try with _BLOCK for hor and ver after completely
+        // supporting full width for vertical text.
+        if(SDRTEXTHORZADJUST_BLOCK == eHAdj && !IsVerticalWriting())
+        {
+            rOutliner.SetMinAutoPaperSize(Size(nAnkWdt, 0));
+        }
+
+        if(SDRTEXTVERTADJUST_BLOCK == eVAdj && IsVerticalWriting())
+        {
+            rOutliner.SetMinAutoPaperSize(Size(0, nAnkHgt));
+        }
+    }
+
+    rOutliner.SetPaperSize(aNullSize);
+    if (bContourFrame)
+        ImpSetContourPolygon( rOutliner, aAnkRect, bLineWidth );
+
+    // put text into the outliner, if available from the edit outliner
+    SdrText* pText = getActiveText();
+    OutlinerParaObject* pOutlinerParaObject = pText ? pText->GetOutlinerParaObject() : nullptr;
+    OutlinerParaObject* pPara = (pEdtOutl && !bNoEditText) ? pEdtOutl->CreateParaObject().release() : pOutlinerParaObject;
+
+    if (pPara)
+    {
+        const bool bHitTest(&getSdrModelFromSdrObject().GetHitTestOutliner() == &rOutliner);
+        const SdrTextObj* pTestObj = rOutliner.GetTextObj();
+
+        if( !pTestObj || !bHitTest || pTestObj != this ||
+            pTestObj->GetOutlinerParaObject() != pOutlinerParaObject )
+        {
+            if( bHitTest ) // #i33696# take back fix #i27510#
+            {
+                rOutliner.SetTextObj( this );
+                rOutliner.SetFixedCellHeight(GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT).GetValue());
+            }
+
+            rOutliner.SetUpdateMode(true);
+            rOutliner.SetText(*pPara);
+        }
+    }
+    else
+    {
+        rOutliner.SetTextObj( nullptr );
+    }
+
+    if (pEdtOutl && !bNoEditText && pPara)
+        delete pPara;
+
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetControlWord(nStat0);
+
+    if( pText )
+        pText->CheckPortionInfo(rOutliner);
+
+    Point aTextPos(aAnkRect.TopLeft());
+    Size aTextSiz(rOutliner.GetPaperSize()); // GetPaperSize() adds a little tolerance, right?
+
+    // For draw objects containing text correct hor/ver alignment if text is bigger
+    // than the object itself. Without that correction, the text would always be
+    // formatted to the left edge (or top edge when vertical) of the draw object.
+    if(!IsTextFrame())
+    {
+        if(aAnkRect.GetWidth() < aTextSiz.Width() && !IsVerticalWriting())
+        {
+            // Horizontal case here. Correct only if eHAdj == SDRTEXTHORZADJUST_BLOCK,
+            // else the alignment is wanted.
+            if(SDRTEXTHORZADJUST_BLOCK == eHAdj)
+            {
+                eHAdj = SDRTEXTHORZADJUST_CENTER;
+            }
+        }
+
+        if(aAnkRect.GetHeight() < aTextSiz.Height() && IsVerticalWriting())
+        {
+            // Vertical case here. Correct only if eHAdj == SDRTEXTVERTADJUST_BLOCK,
+            // else the alignment is wanted.
+            if(SDRTEXTVERTADJUST_BLOCK == eVAdj)
+            {
+                eVAdj = SDRTEXTVERTADJUST_CENTER;
+            }
+        }
+    }
+
+    if (eHAdj==SDRTEXTHORZADJUST_CENTER || eHAdj==SDRTEXTHORZADJUST_RIGHT)
+    {
+        long nFreeWdt=aAnkRect.GetWidth()-aTextSiz.Width();
+        if (eHAdj==SDRTEXTHORZADJUST_CENTER)
+            aTextPos.AdjustX(nFreeWdt/2 );
+        if (eHAdj==SDRTEXTHORZADJUST_RIGHT)
+            aTextPos.AdjustX(nFreeWdt );
+    }
+    if (eVAdj==SDRTEXTVERTADJUST_CENTER || eVAdj==SDRTEXTVERTADJUST_BOTTOM)
+    {
+        long nFreeHgt=aAnkRect.GetHeight()-aTextSiz.Height();
+        if (eVAdj==SDRTEXTVERTADJUST_CENTER)
+            aTextPos.AdjustY(nFreeHgt/2 );
+        if (eVAdj==SDRTEXTVERTADJUST_BOTTOM)
+            aTextPos.AdjustY(nFreeHgt );
+    }
+    if (aGeo.nRotationAngle!=0)
+        RotatePoint(aTextPos,aAnkRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+
+    if (pAnchorRect)
+        *pAnchorRect=aAnkRect;
+
+    // rTextRect might not be correct in some cases at ContourFrame
+    rTextRect=tools::Rectangle(aTextPos,aTextSiz);
+    if (bContourFrame)
+        rTextRect=aAnkRect;
+}
+
+bool SdrTextObj::CanCreateEditOutlinerParaObject() const
+{
+    if( HasTextImpl( pEdtOutl ) )
+    {
+        return pEdtOutl->GetParagraphCount() > 0;
+    }
+    return false;
+}
+
+std::unique_ptr<OutlinerParaObject> SdrTextObj::CreateEditOutlinerParaObject() const
+{
+    std::unique_ptr<OutlinerParaObject> pPara;
+    if( HasTextImpl( pEdtOutl ) )
+    {
+        sal_Int32 nParaCount = pEdtOutl->GetParagraphCount();
+        pPara = pEdtOutl->CreateParaObject(0, nParaCount);
+    }
+    return pPara;
+}
+
+void SdrTextObj::ImpSetCharStretching(SdrOutliner& rOutliner, const Size& rTextSize, const Size& rShapeSize, Fraction& rFitXCorrection)
+{
+    OutputDevice* pOut = rOutliner.GetRefDevice();
+    bool bNoStretching(false);
+
+    if(pOut && pOut->GetOutDevType() == OUTDEV_PRINTER)
+    {
+        // check whether CharStretching is possible at all
+        GDIMetaFile* pMtf = pOut->GetConnectMetaFile();
+        OUString aTestString(u'J');
+
+        if(pMtf && (!pMtf->IsRecord() || pMtf->IsPause()))
+            pMtf = nullptr;
+
+        if(pMtf)
+            pMtf->Pause(true);
+
+        vcl::Font aOriginalFont(pOut->GetFont());
+        vcl::Font aTmpFont( OutputDevice::GetDefaultFont( DefaultFontType::SERIF, LANGUAGE_SYSTEM, GetDefaultFontFlags::OnlyOne ) );
+
+        aTmpFont.SetFontSize(Size(0,100));
+        pOut->SetFont(aTmpFont);
+        Size aSize1(pOut->GetTextWidth(aTestString), pOut->GetTextHeight());
+        aTmpFont.SetFontSize(Size(800,100));
+        pOut->SetFont(aTmpFont);
+        Size aSize2(pOut->GetTextWidth(aTestString), pOut->GetTextHeight());
+        pOut->SetFont(aOriginalFont);
+
+        if(pMtf)
+            pMtf->Pause(false);
+
+        bNoStretching = (aSize1 == aSize2);
+
+#ifdef _WIN32
+        // Windows zooms the font proportionally when using Size(100,500),
+        // we don't like that.
+        if(aSize2.Height() >= aSize1.Height() * 2)
+        {
+            bNoStretching = true;
+        }
+#endif
+    }
+    unsigned nLoopCount=0;
+    bool bNoMoreLoop = false;
+    long nXDiff0=0x7FFFFFFF;
+    long nWantWdt=rShapeSize.Width();
+    long nIsWdt=rTextSize.Width();
+    if (nIsWdt==0) nIsWdt=1;
+
+    long nWantHgt=rShapeSize.Height();
+    long nIsHgt=rTextSize.Height();
+    if (nIsHgt==0) nIsHgt=1;
+
+    long nXTolPl=nWantWdt/100; // tolerance: +1%
+    long nXTolMi=nWantWdt/25;  // tolerance: -4%
+    long nXCorr =nWantWdt/20;  // correction scale: 5%
+
+    long nX=(nWantWdt*100) /nIsWdt; // calculate X stretching
+    long nY=(nWantHgt*100) /nIsHgt; // calculate Y stretching
+    bool bChkX = true;
+    if (bNoStretching) { // might only be possible proportionally
+        if (nX>nY) { nX=nY; bChkX=false; }
+        else { nY=nX; }
+    }
+
+    while (nLoopCount<5 && !bNoMoreLoop) {
+        if (nX<0) nX=-nX;
+        if (nX<1) { nX=1; bNoMoreLoop = true; }
+        if (nX>65535) { nX=65535; bNoMoreLoop = true; }
+
+        if (nY<0) nY=-nY;
+        if (nY<1) { nY=1; bNoMoreLoop = true; }
+        if (nY>65535) { nY=65535; bNoMoreLoop = true; }
+
+        // exception, there is no text yet (horizontal case)
+        if(nIsWdt <= 1)
+        {
+            nX = nY;
+            bNoMoreLoop = true;
+        }
+
+        // exception, there is no text yet (vertical case)
+        if(nIsHgt <= 1)
+        {
+            nY = nX;
+            bNoMoreLoop = true;
+        }
+
+        rOutliner.SetGlobalCharStretching(static_cast<sal_uInt16>(nX),static_cast<sal_uInt16>(nY));
+        nLoopCount++;
+        Size aSiz(rOutliner.CalcTextSize());
+        long nXDiff=aSiz.Width()-nWantWdt;
+        rFitXCorrection=Fraction(nWantWdt,aSiz.Width());
+        if (((nXDiff>=nXTolMi || !bChkX) && nXDiff<=nXTolPl) || nXDiff==nXDiff0) {
+            bNoMoreLoop = true;
+        } else {
+            // correct stretching factors
+            long nMul=nWantWdt;
+            long nDiv=aSiz.Width();
+            if (std::abs(nXDiff)<=2*nXCorr) {
+                if (nMul>nDiv) nDiv+=(nMul-nDiv)/2; // but only add half of what we calculated,
+                else nMul+=(nDiv-nMul)/2;           // because the EditEngine calculates wrongly later on
+            }
+            nX=nX*nMul/nDiv;
+            if (bNoStretching) nY=nX;
+        }
+        nXDiff0=nXDiff;
+    }
+}
+
+OUString SdrTextObj::TakeObjNameSingul() const
+{
+    OUString aStr;
+
+    switch(eTextKind)
+    {
+        case OBJ_OUTLINETEXT:
+        {
+            aStr = SvxResId(STR_ObjNameSingulOUTLINETEXT);
+            break;
+        }
+
+        case OBJ_TITLETEXT  :
+        {
+            aStr = SvxResId(STR_ObjNameSingulTITLETEXT);
+            break;
+        }
+
+        default:
+        {
+            if(IsLinkedText())
+                aStr = SvxResId(STR_ObjNameSingulTEXTLNK);
+            else
+                aStr = SvxResId(STR_ObjNameSingulTEXT);
+            break;
+        }
+    }
+
+    OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+    if(pOutlinerParaObject && eTextKind != OBJ_OUTLINETEXT)
+    {
+        // shouldn't currently cause any problems at OUTLINETEXT
+        OUString aStr2(comphelper::string::stripStart(pOutlinerParaObject->GetTextObject().GetText(0), ' '));
+
+        // avoid non expanded text portions in object name
+        // (second condition is new)
+        if(!aStr2.isEmpty() && aStr2.indexOf(u'\x00FF') == -1)
+        {
+            // space between ResStr and content text
+            aStr += " \'";
+
+            if(aStr2.getLength() > 10)
+            {
+                aStr2 = aStr2.copy(0, 8) + "...";
+            }
+
+            aStr += aStr2 + "\'";
+        }
+    }
+
+    OUStringBuffer sName(aStr);
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrTextObj::TakeObjNamePlural() const
+{
+    OUString sName;
+    switch (eTextKind) {
+        case OBJ_OUTLINETEXT: sName=SvxResId(STR_ObjNamePluralOUTLINETEXT); break;
+        case OBJ_TITLETEXT  : sName=SvxResId(STR_ObjNamePluralTITLETEXT);   break;
+        default: {
+            if (IsLinkedText()) {
+                sName=SvxResId(STR_ObjNamePluralTEXTLNK);
+            } else {
+                sName=SvxResId(STR_ObjNamePluralTEXT);
+            }
+        } break;
+    } // switch
+    return sName;
+}
+
+SdrTextObj* SdrTextObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrTextObj >(rTargetModel);
+}
+
+SdrTextObj& SdrTextObj::operator=(const SdrTextObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+
+    // call parent. tdf#116979: use the correct parent class
+    SdrAttrObj::operator=(rObj);
+
+    maRect = rObj.maRect;
+    aGeo      =rObj.aGeo;
+    eTextKind =rObj.eTextKind;
+    bTextFrame=rObj.bTextFrame;
+    aTextSize=rObj.aTextSize;
+    bTextSizeDirty=rObj.bTextSizeDirty;
+
+    // Not all of the necessary parameters were copied yet.
+    bNoShear = rObj.bNoShear;
+    bDisableAutoWidthOnDragging = rObj.bDisableAutoWidthOnDragging;
+    SdrText* pText = getActiveText();
+
+    if( pText && rObj.HasText() )
+    {
+        // before pNewOutlinerParaObject was created the same, but
+        // set at mpText (outside this scope), but mpText might be
+        // empty (this operator== seems not prepared for MultiText
+        // objects). In the current form it makes only sense to
+        // create locally and use locally on a known existing SdrText
+        const Outliner* pEO=rObj.pEdtOutl;
+        std::unique_ptr<OutlinerParaObject> pNewOutlinerParaObject;
+
+        if (pEO!=nullptr)
+        {
+            pNewOutlinerParaObject = pEO->CreateParaObject();
+        }
+        else if (nullptr != rObj.getActiveText()->GetOutlinerParaObject())
+        {
+            pNewOutlinerParaObject.reset( new OutlinerParaObject(*rObj.getActiveText()->GetOutlinerParaObject()) );
+        }
+
+        pText->SetOutlinerParaObject( std::move(pNewOutlinerParaObject) );
+    }
+
+    ImpSetTextStyleSheetListeners();
+    return *this;
+}
+
+basegfx::B2DPolyPolygon SdrTextObj::TakeXorPoly() const
+{
+    tools::Polygon aPol(maRect);
+    if (aGeo.nShearAngle!=0) ShearPoly(aPol,maRect.TopLeft(),aGeo.nTan);
+    if (aGeo.nRotationAngle!=0) RotatePoly(aPol,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+
+    basegfx::B2DPolyPolygon aRetval;
+    aRetval.append(aPol.getB2DPolygon());
+    return aRetval;
+}
+
+basegfx::B2DPolyPolygon SdrTextObj::TakeContour() const
+{
+    basegfx::B2DPolyPolygon aRetval(SdrAttrObj::TakeContour());
+
+    // and now add the BoundRect of the text, if necessary
+    if ( GetOutlinerParaObject() && !IsFontwork() && !IsContourTextFrame() )
+    {
+        // using Clone()-Paint() strategy inside TakeContour() leaves a destroyed
+        // SdrObject as pointer in DrawOutliner. Set *this again in fetching the outliner
+        // in every case
+        SdrOutliner& rOutliner=ImpGetDrawOutliner();
+
+        tools::Rectangle aAnchor2;
+        tools::Rectangle aR;
+        TakeTextRect(rOutliner,aR,false,&aAnchor2);
+        rOutliner.Clear();
+        bool bFitToSize(IsFitToSize());
+        if (bFitToSize) aR=aAnchor2;
+        tools::Polygon aPol(aR);
+        if (aGeo.nRotationAngle!=0) RotatePoly(aPol,aR.TopLeft(),aGeo.nSin,aGeo.nCos);
+
+        aRetval.append(aPol.getB2DPolygon());
+    }
+
+    return aRetval;
+}
+
+void SdrTextObj::RecalcSnapRect()
+{
+    if (aGeo.nRotationAngle!=0 || aGeo.nShearAngle!=0)
+    {
+        tools::Polygon aPol(maRect);
+        if (aGeo.nShearAngle!=0) ShearPoly(aPol,maRect.TopLeft(),aGeo.nTan);
+        if (aGeo.nRotationAngle!=0) RotatePoly(aPol,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+        maSnapRect=aPol.GetBoundRect();
+    } else {
+        maSnapRect = maRect;
+    }
+}
+
+sal_uInt32 SdrTextObj::GetSnapPointCount() const
+{
+    return 4;
+}
+
+Point SdrTextObj::GetSnapPoint(sal_uInt32 i) const
+{
+    Point aP;
+    switch (i) {
+        case 0: aP=maRect.TopLeft(); break;
+        case 1: aP=maRect.TopRight(); break;
+        case 2: aP=maRect.BottomLeft(); break;
+        case 3: aP=maRect.BottomRight(); break;
+        default: aP=maRect.Center(); break;
+    }
+    if (aGeo.nShearAngle!=0) ShearPoint(aP,maRect.TopLeft(),aGeo.nTan);
+    if (aGeo.nRotationAngle!=0) RotatePoint(aP,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+    return aP;
+}
+
+// Extracted from ImpGetDrawOutliner()
+void SdrTextObj::ImpInitDrawOutliner( SdrOutliner& rOutl ) const
+{
+    rOutl.SetUpdateMode(false);
+    OutlinerMode nOutlinerMode = OutlinerMode::OutlineObject;
+    if ( !IsOutlText() )
+        nOutlinerMode = OutlinerMode::TextObject;
+    rOutl.Init( nOutlinerMode );
+
+    rOutl.SetGlobalCharStretching();
+    EEControlBits nStat=rOutl.GetControlWord();
+    nStat &= ~EEControlBits(EEControlBits::STRETCHING|EEControlBits::AUTOPAGESIZE);
+    rOutl.SetControlWord(nStat);
+    Size aMaxSize(100000,100000);
+    rOutl.SetMinAutoPaperSize(Size());
+    rOutl.SetMaxAutoPaperSize(aMaxSize);
+    rOutl.SetPaperSize(aMaxSize);
+    rOutl.ClearPolygon();
+}
+
+SdrOutliner& SdrTextObj::ImpGetDrawOutliner() const
+{
+    SdrOutliner& rOutl(getSdrModelFromSdrObject().GetDrawOutliner(this));
+
+    // Code extracted to ImpInitDrawOutliner()
+    ImpInitDrawOutliner( rOutl );
+
+    return rOutl;
+}
+
+// Extracted from Paint()
+void SdrTextObj::ImpSetupDrawOutlinerForPaint( bool             bContourFrame,
+                                               SdrOutliner&     rOutliner,
+                                               tools::Rectangle&       rTextRect,
+                                               tools::Rectangle&       rAnchorRect,
+                                               tools::Rectangle&       rPaintRect,
+                                               Fraction&        rFitXCorrection ) const
+{
+    if (!bContourFrame)
+    {
+        // FitToSize can't be used together with ContourFrame for now
+        if (IsFitToSize() || IsAutoFit())
+        {
+            EEControlBits nStat=rOutliner.GetControlWord();
+            nStat|=EEControlBits::STRETCHING|EEControlBits::AUTOPAGESIZE;
+            rOutliner.SetControlWord(nStat);
+        }
+    }
+    rOutliner.SetFixedCellHeight(GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT).GetValue());
+    TakeTextRect(rOutliner, rTextRect, false, &rAnchorRect);
+    rPaintRect = rTextRect;
+
+    if (!bContourFrame)
+    {
+        // FitToSize can't be used together with ContourFrame for now
+        if (IsFitToSize())
+        {
+            ImpSetCharStretching(rOutliner,rTextRect.GetSize(),rAnchorRect.GetSize(),rFitXCorrection);
+            rPaintRect=rAnchorRect;
+        }
+        else if (IsAutoFit())
+        {
+            ImpAutoFitText(rOutliner);
+        }
+    }
+}
+
+double SdrTextObj::GetFontScaleY() const
+{
+    SdrText* pText = getActiveText();
+    if (pText == nullptr || !pText->GetOutlinerParaObject())
+        return 1.0;
+
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+    const Size aShapeSize = GetSnapRect().GetSize();
+    const Size aSize(aShapeSize.Width() - GetTextLeftDistance() - GetTextRightDistance(),
+        aShapeSize.Height() - GetTextUpperDistance() - GetTextLowerDistance());
+
+    rOutliner.SetPaperSize(aSize);
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetText(*pText->GetOutlinerParaObject());
+    bool bIsVerticalWriting = IsVerticalWriting();
+
+    // Algorithm from SdrTextObj::ImpAutoFitText
+
+    sal_uInt16 nMinStretchX = 0, nMinStretchY = 0;
+    sal_uInt16 nCurrStretchX = 100, nCurrStretchY = 100;
+    sal_uInt16 aOldStretchXVals[] = { 0,0,0 };
+    const size_t aStretchArySize = SAL_N_ELEMENTS(aOldStretchXVals);
+    for (unsigned int i = 0; i<aStretchArySize; ++i)
+    {
+        const Size aCurrTextSize = rOutliner.CalcTextSizeNTP();
+        double fFactor(1.0);
+        if (bIsVerticalWriting)
+        {
+            if (aCurrTextSize.Width() != 0)
+            {
+                fFactor = double(aSize.Width()) / aCurrTextSize.Width();
+            }
+        }
+        else if (aCurrTextSize.Height() != 0)
+        {
+            fFactor = double(aSize.Height()) / aCurrTextSize.Height();
+        }
+        fFactor = std::sqrt(fFactor);
+
+        rOutliner.GetGlobalCharStretching(nCurrStretchX, nCurrStretchY);
+
+        if (fFactor >= 1.0)
+        {
+            nMinStretchX = std::max(nMinStretchX, nCurrStretchX);
+            nMinStretchY = std::max(nMinStretchY, nCurrStretchY);
+        }
+
+        aOldStretchXVals[i] = nCurrStretchX;
+        if (std::find(aOldStretchXVals, aOldStretchXVals + i, nCurrStretchX) != aOldStretchXVals + i)
+            break; // same value already attained once; algo is looping, exit
+
+        if (fFactor < 1.0 || nCurrStretchX != 100)
+        {
+            nCurrStretchX = sal::static_int_cast<sal_uInt16>(nCurrStretchX*fFactor);
+            nCurrStretchY = sal::static_int_cast<sal_uInt16>(nCurrStretchY*fFactor);
+            rOutliner.SetGlobalCharStretching(std::min(sal_uInt16(100), nCurrStretchX),
+                std::min(sal_uInt16(100), nCurrStretchY));
+        }
+    }
+
+    return std::min(sal_uInt16(100), nCurrStretchY) / 100.0;
+}
+
+void SdrTextObj::ImpAutoFitText( SdrOutliner& rOutliner ) const
+{
+    const Size aShapeSize=GetSnapRect().GetSize();
+    ImpAutoFitText( rOutliner,
+                    Size(aShapeSize.Width()-GetTextLeftDistance()-GetTextRightDistance(),
+                         aShapeSize.Height()-GetTextUpperDistance()-GetTextLowerDistance()),
+                    IsVerticalWriting() );
+}
+
+void SdrTextObj::ImpAutoFitText(SdrOutliner& rOutliner, const Size& rTextSize,
+                                bool bIsVerticalWriting) const
+{
+    // EditEngine formatting is unstable enough for
+    // line-breaking text that we need some more samples
+
+    // loop early-exits if we detect an already attained value
+    sal_uInt16 nMinStretchX=0, nMinStretchY=0;
+    sal_uInt16 aOldStretchXVals[]={0,0,0,0,0,0,0,0,0,0};
+    const size_t aStretchArySize=SAL_N_ELEMENTS(aOldStretchXVals);
+    for(unsigned int i=0; i<aStretchArySize; ++i)
+    {
+        const Size aCurrTextSize = rOutliner.CalcTextSizeNTP();
+        double fFactor(1.0);
+        if( bIsVerticalWriting )
+        {
+            if (aCurrTextSize.Width() != 0)
+            {
+                fFactor = double(rTextSize.Width())/aCurrTextSize.Width();
+            }
+        }
+        else if (aCurrTextSize.Height() != 0)
+        {
+            fFactor = double(rTextSize.Height())/aCurrTextSize.Height();
+        }
+        // fFactor scales in both x and y directions
+        // - this is fine for bulleted words
+        // - but it scales too much for a long paragraph
+        // - taking sqrt scales long paragraphs the best
+        // - bulleted words will have to go through more iterations
+        fFactor = std::sqrt(fFactor);
+
+        sal_uInt16 nCurrStretchX, nCurrStretchY;
+        rOutliner.GetGlobalCharStretching(nCurrStretchX, nCurrStretchY);
+
+        if (fFactor >= 1.0 )
+        {
+            // resulting text area fits into available shape rect -
+            // err on the larger stretching, to optimally fill area
+            nMinStretchX = std::max(nMinStretchX,nCurrStretchX);
+            nMinStretchY = std::max(nMinStretchY,nCurrStretchY);
+        }
+
+        aOldStretchXVals[i] = nCurrStretchX;
+        if( std::find(aOldStretchXVals, aOldStretchXVals+i, nCurrStretchX) != aOldStretchXVals+i )
+            break; // same value already attained once; algo is looping, exit
+
+        if (fFactor < 1.0 || nCurrStretchX != 100)
+        {
+            nCurrStretchX = sal::static_int_cast<sal_uInt16>(nCurrStretchX*fFactor);
+            nCurrStretchY = sal::static_int_cast<sal_uInt16>(nCurrStretchY*fFactor);
+            rOutliner.SetGlobalCharStretching(std::min(sal_uInt16(100),nCurrStretchX),
+                                              std::min(sal_uInt16(100),nCurrStretchY));
+            SAL_INFO("svx", "zoom is " << nCurrStretchX);
+        }
+    }
+
+    const SdrTextFitToSizeTypeItem& rItem = GetObjectItem(SDRATTR_TEXT_FITTOSIZE);
+    if (rItem.GetMaxScale() > 0)
+    {
+        nMinStretchX = std::min<sal_uInt16>(rItem.GetMaxScale(), nMinStretchX);
+        nMinStretchY = std::min<sal_uInt16>(rItem.GetMaxScale(), nMinStretchY);
+    }
+
+    SAL_INFO("svx", "final zoom is " << nMinStretchX);
+    rOutliner.SetGlobalCharStretching(std::min(sal_uInt16(100),nMinStretchX),
+                                      std::min(sal_uInt16(100),nMinStretchY));
+}
+
+void SdrTextObj::SetupOutlinerFormatting( SdrOutliner& rOutl, tools::Rectangle& rPaintRect ) const
+{
+    ImpInitDrawOutliner( rOutl );
+    UpdateOutlinerFormatting( rOutl, rPaintRect );
+}
+
+void SdrTextObj::UpdateOutlinerFormatting( SdrOutliner& rOutl, tools::Rectangle& rPaintRect ) const
+{
+    tools::Rectangle aTextRect;
+    tools::Rectangle aAnchorRect;
+    Fraction aFitXCorrection(1,1);
+
+    const bool bContourFrame(IsContourTextFrame());
+    const MapMode aMapMode(
+        getSdrModelFromSdrObject().GetScaleUnit(),
+        Point(0,0),
+        getSdrModelFromSdrObject().GetScaleFraction(),
+        getSdrModelFromSdrObject().GetScaleFraction());
+
+    rOutl.SetRefMapMode(aMapMode);
+    ImpSetupDrawOutlinerForPaint(
+        bContourFrame,
+        rOutl,
+        aTextRect,
+        aAnchorRect,
+        rPaintRect,
+        aFitXCorrection);
+}
+
+
+OutlinerParaObject* SdrTextObj::GetOutlinerParaObject() const
+{
+    SdrText* pText = getActiveText();
+    if( pText )
+        return pText->GetOutlinerParaObject();
+    else
+        return nullptr;
+}
+
+void SdrTextObj::NbcSetOutlinerParaObject(std::unique_ptr<OutlinerParaObject> pTextObject)
+{
+    NbcSetOutlinerParaObjectForText( std::move(pTextObject), getActiveText() );
+}
+
+void SdrTextObj::NbcSetOutlinerParaObjectForText( std::unique_ptr<OutlinerParaObject> pTextObject, SdrText* pText )
+{
+    if( pText )
+        pText->SetOutlinerParaObject( std::move(pTextObject) );
+
+    if (pText && pText->GetOutlinerParaObject())
+    {
+        SvxWritingModeItem aWritingMode(pText->GetOutlinerParaObject()->IsVertical() && pText->GetOutlinerParaObject()->IsTopToBottom()
+            ? css::text::WritingMode_TB_RL
+            : css::text::WritingMode_LR_TB,
+            SDRATTR_TEXTDIRECTION);
+        GetProperties().SetObjectItemDirect(aWritingMode);
+    }
+
+    SetTextSizeDirty();
+    if (IsTextFrame() && (IsAutoGrowHeight() || IsAutoGrowWidth()))
+    { // adapt text frame!
+        NbcAdjustTextFrameWidthAndHeight();
+    }
+    if (!IsTextFrame())
+    {
+        // the SnapRect keeps its size
+        SetRectsDirty(true);
+    }
+
+    // always invalidate BoundRect on change
+    SetBoundRectDirty();
+    ActionChanged();
+
+    ImpSetTextStyleSheetListeners();
+}
+
+void SdrTextObj::NbcReformatText()
+{
+    SdrText* pText = getActiveText();
+    if( pText && pText->GetOutlinerParaObject() )
+    {
+        pText->ReformatText();
+        if (bTextFrame)
+        {
+            NbcAdjustTextFrameWidthAndHeight();
+        }
+        else
+        {
+            // the SnapRect keeps its size
+            SetBoundRectDirty();
+            SetRectsDirty(true);
+        }
+        SetTextSizeDirty();
+        ActionChanged();
+        // i22396
+        // Necessary here since we have no compare operator at the outliner
+        // para object which may detect changes regarding the combination
+        // of outliner para data and configuration (e.g., change of
+        // formatting of text numerals)
+        GetViewContact().flushViewObjectContacts(false);
+    }
+}
+
+SdrObjGeoData* SdrTextObj::NewGeoData() const
+{
+    return new SdrTextObjGeoData;
+}
+
+void SdrTextObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    SdrAttrObj::SaveGeoData(rGeo);
+    SdrTextObjGeoData& rTGeo=static_cast<SdrTextObjGeoData&>(rGeo);
+    rTGeo.aRect = maRect;
+    rTGeo.aGeo   =aGeo;
+}
+
+void SdrTextObj::RestGeoData(const SdrObjGeoData& rGeo)
+{ // RectsDirty is called by SdrObject
+    SdrAttrObj::RestGeoData(rGeo);
+    const SdrTextObjGeoData& rTGeo=static_cast<const SdrTextObjGeoData&>(rGeo);
+    NbcSetLogicRect(rTGeo.aRect);
+    aGeo   =rTGeo.aGeo;
+    SetTextSizeDirty();
+}
+
+drawing::TextFitToSizeType SdrTextObj::GetFitToSize() const
+{
+    drawing::TextFitToSizeType eType = drawing::TextFitToSizeType_NONE;
+
+    if(!IsAutoGrowWidth())
+        eType = GetObjectItem(SDRATTR_TEXT_FITTOSIZE).GetValue();
+
+    return eType;
+}
+
+const tools::Rectangle& SdrTextObj::GetGeoRect() const
+{
+    return maRect;
+}
+
+void SdrTextObj::ForceOutlinerParaObject()
+{
+    SdrText* pText = getActiveText();
+    if( pText && (pText->GetOutlinerParaObject() == nullptr) )
+    {
+        OutlinerMode nOutlMode = OutlinerMode::TextObject;
+        if( IsTextFrame() && eTextKind == OBJ_OUTLINETEXT )
+            nOutlMode = OutlinerMode::OutlineObject;
+
+        pText->ForceOutlinerParaObject( nOutlMode );
+    }
+}
+
+TextChain *SdrTextObj::GetTextChain() const
+{
+    //if (!IsChainable())
+    //    return NULL;
+
+    return getSdrModelFromSdrObject().GetTextChain();
+}
+
+bool SdrTextObj::IsVerticalWriting() const
+{
+    if(pEdtOutl)
+    {
+        return pEdtOutl->IsVertical();
+    }
+
+    OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+    if(pOutlinerParaObject)
+    {
+        return pOutlinerParaObject->IsVertical();
+    }
+
+    return false;
+}
+
+void SdrTextObj::SetVerticalWriting(bool bVertical)
+{
+    OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+
+    if( !pOutlinerParaObject && bVertical )
+    {
+        // we only need to force an outliner para object if the default of
+        // horizontal text is changed
+        ForceOutlinerParaObject();
+        pOutlinerParaObject = GetOutlinerParaObject();
+    }
+
+    if (!pOutlinerParaObject ||
+        (pOutlinerParaObject->IsVertical() == bVertical))
+        return;
+
+    // get item settings
+    const SfxItemSet& rSet = GetObjectItemSet();
+    bool bAutoGrowWidth = rSet.Get(SDRATTR_TEXT_AUTOGROWWIDTH).GetValue();
+    bool bAutoGrowHeight = rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue();
+
+    // Also exchange hor/ver adjust items
+    SdrTextHorzAdjust eHorz = rSet.Get(SDRATTR_TEXT_HORZADJUST).GetValue();
+    SdrTextVertAdjust eVert = rSet.Get(SDRATTR_TEXT_VERTADJUST).GetValue();
+
+    // rescue object size
+    tools::Rectangle aObjectRect = GetSnapRect();
+
+    // prepare ItemSet to set exchanged width and height items
+    SfxItemSet aNewSet(*rSet.GetPool(),
+        svl::Items<SDRATTR_TEXT_AUTOGROWHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT,
+        // Expanded item ranges to also support hor and ver adjust.
+        SDRATTR_TEXT_VERTADJUST, SDRATTR_TEXT_VERTADJUST,
+        SDRATTR_TEXT_AUTOGROWWIDTH, SDRATTR_TEXT_HORZADJUST>{});
+
+    aNewSet.Put(rSet);
+    aNewSet.Put(makeSdrTextAutoGrowWidthItem(bAutoGrowHeight));
+    aNewSet.Put(makeSdrTextAutoGrowHeightItem(bAutoGrowWidth));
+
+    // Exchange horz and vert adjusts
+    switch (eVert)
+    {
+        case SDRTEXTVERTADJUST_TOP: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); break;
+        case SDRTEXTVERTADJUST_CENTER: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_CENTER)); break;
+        case SDRTEXTVERTADJUST_BOTTOM: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_LEFT)); break;
+        case SDRTEXTVERTADJUST_BLOCK: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_BLOCK)); break;
+    }
+    switch (eHorz)
+    {
+        case SDRTEXTHORZADJUST_LEFT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BOTTOM)); break;
+        case SDRTEXTHORZADJUST_CENTER: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); break;
+        case SDRTEXTHORZADJUST_RIGHT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_TOP)); break;
+        case SDRTEXTHORZADJUST_BLOCK: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BLOCK)); break;
+    }
+
+    SetObjectItemSet(aNewSet);
+
+    pOutlinerParaObject = GetOutlinerParaObject();
+    if (pOutlinerParaObject)
+    {
+        // set ParaObject orientation accordingly
+        pOutlinerParaObject->SetVertical(bVertical);
+    }
+
+    // restore object size
+    SetSnapRect(aObjectRect);
+}
+
+// transformation interface for StarOfficeAPI. This implements support for
+// homogeneous 3x3 matrices containing the transformation of the SdrObject. At the
+// moment it contains a shearX, rotation and translation, but for setting all linear
+// transforms like Scale, ShearX, ShearY, Rotate and Translate are supported.
+
+
+// gets base transformation and rectangle of object. If it's an SdrPathObj it fills the PolyPolygon
+// with the base geometry and returns TRUE. Otherwise it returns FALSE.
+bool SdrTextObj::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const
+{
+    // get turn and shear
+    double fRotate = basegfx::deg2rad(aGeo.nRotationAngle / 100.0);
+    double fShearX = basegfx::deg2rad(aGeo.nShearAngle / 100.0);
+
+    // get aRect, this is the unrotated snaprect
+    tools::Rectangle aRectangle(maRect);
+
+    // fill other values
+    basegfx::B2DTuple aScale(aRectangle.GetWidth(), aRectangle.GetHeight());
+    basegfx::B2DTuple aTranslate(aRectangle.Left(), aRectangle.Top());
+
+    // position maybe relative to anchorpos, convert
+    if( getSdrModelFromSdrObject().IsWriter() )
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build matrix
+    rMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+        aScale,
+        basegfx::fTools::equalZero(fShearX) ? 0.0 : tan(fShearX),
+        basegfx::fTools::equalZero(fRotate) ? 0.0 : -fRotate,
+        aTranslate);
+
+    return false;
+}
+
+// sets the base geometry of the object using infos contained in the homogeneous 3x3 matrix.
+// If it's an SdrPathObj it will use the provided geometry information. The Polygon has
+// to use (0,0) as upper left and will be scaled to the given size in the matrix.
+void SdrTextObj::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/)
+{
+    // break up matrix
+    basegfx::B2DTuple aScale;
+    basegfx::B2DTuple aTranslate;
+    double fRotate(0.0);
+    double fShearX(0.0);
+    rMatrix.decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // flip?
+    bool bFlipX = aScale.getX() < 0.0,
+         bFlipY = aScale.getY() < 0.0;
+    if (bFlipX)
+    {
+        aScale.setX(fabs(aScale.getX()));
+    }
+    if (bFlipY)
+    {
+        aScale.setY(fabs(aScale.getY()));
+    }
+
+    // reset object shear and rotations
+    aGeo.nRotationAngle = 0;
+    aGeo.RecalcSinCos();
+    aGeo.nShearAngle = 0;
+    aGeo.RecalcTan();
+
+    // if anchor is used, make position relative to it
+    if( getSdrModelFromSdrObject().IsWriter() )
+    {
+        if(GetAnchorPos().X() || GetAnchorPos().Y())
+        {
+            aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
+        }
+    }
+
+    // build and set BaseRect (use scale)
+    Size aSize(FRound(aScale.getX()), FRound(aScale.getY()));
+    tools::Rectangle aBaseRect(Point(), aSize);
+    SetSnapRect(aBaseRect);
+
+    // flip?
+    if (bFlipX)
+    {
+        Mirror(Point(), Point(0, 1));
+    }
+    if (bFlipY)
+    {
+        Mirror(Point(), Point(1, 0));
+    }
+
+    // shear?
+    if(!basegfx::fTools::equalZero(fShearX))
+    {
+        GeoStat aGeoStat;
+        aGeoStat.nShearAngle = FRound(basegfx::rad2deg(atan(fShearX)) * 100.0);
+        aGeoStat.RecalcTan();
+        Shear(Point(), aGeoStat.nShearAngle, aGeoStat.nTan, false);
+    }
+
+    // rotation?
+    if(!basegfx::fTools::equalZero(fRotate))
+    {
+        GeoStat aGeoStat;
+
+        // #i78696#
+        // fRotate is matematically correct, but aGeoStat.nRotationAngle is
+        // mirrored -> mirror value here
+        aGeoStat.nRotationAngle = NormAngle36000(FRound(-fRotate / F_PI18000));
+        aGeoStat.RecalcSinCos();
+        Rotate(Point(), aGeoStat.nRotationAngle, aGeoStat.nSin, aGeoStat.nCos);
+    }
+
+    // translate?
+    if(!aTranslate.equalZero())
+    {
+        Move(Size(FRound(aTranslate.getX()), FRound(aTranslate.getY())));
+    }
+}
+
+bool SdrTextObj::IsReallyEdited() const
+{
+    return pEdtOutl && pEdtOutl->IsModified();
+}
+
+// moved inlines here form hxx
+
+long SdrTextObj::GetEckenradius() const
+{
+    return GetObjectItemSet().Get(SDRATTR_ECKENRADIUS).GetValue();
+}
+
+long SdrTextObj::GetMinTextFrameHeight() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_MINFRAMEHEIGHT).GetValue();
+}
+
+long SdrTextObj::GetMaxTextFrameHeight() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_MAXFRAMEHEIGHT).GetValue();
+}
+
+long SdrTextObj::GetMinTextFrameWidth() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_MINFRAMEWIDTH).GetValue();
+}
+
+long SdrTextObj::GetMaxTextFrameWidth() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_MAXFRAMEWIDTH).GetValue();
+}
+
+bool SdrTextObj::IsFontwork() const
+{
+    return !bTextFrame // Default is FALSE
+        && GetObjectItemSet().Get(XATTR_FORMTXTSTYLE).GetValue() != XFormTextStyle::NONE;
+}
+
+bool SdrTextObj::IsHideContour() const
+{
+    return !bTextFrame // Default is: no, don't HideContour; HideContour not together with TextFrames
+        && GetObjectItemSet().Get(XATTR_FORMTXTHIDEFORM).GetValue();
+}
+
+bool SdrTextObj::IsContourTextFrame() const
+{
+    return !bTextFrame // ContourFrame not together with normal TextFrames
+        && GetObjectItemSet().Get(SDRATTR_TEXT_CONTOURFRAME).GetValue();
+}
+
+long SdrTextObj::GetTextLeftDistance() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_LEFTDIST).GetValue();
+}
+
+long SdrTextObj::GetTextRightDistance() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_RIGHTDIST).GetValue();
+}
+
+long SdrTextObj::GetTextUpperDistance() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_UPPERDIST).GetValue();
+}
+
+long SdrTextObj::GetTextLowerDistance() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_LOWERDIST).GetValue();
+}
+
+SdrTextAniKind SdrTextObj::GetTextAniKind() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_ANIKIND).GetValue();
+}
+
+SdrTextAniDirection SdrTextObj::GetTextAniDirection() const
+{
+    return GetObjectItemSet().Get(SDRATTR_TEXT_ANIDIRECTION).GetValue();
+}
+
+// Get necessary data for text scroll animation. ATM base it on a Text-Metafile and a
+// painting rectangle. Rotation is excluded from the returned values.
+GDIMetaFile* SdrTextObj::GetTextScrollMetaFileAndRectangle(
+    tools::Rectangle& rScrollRectangle, tools::Rectangle& rPaintRectangle)
+{
+    GDIMetaFile* pRetval = nullptr;
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+    tools::Rectangle aTextRect;
+    tools::Rectangle aAnchorRect;
+    tools::Rectangle aPaintRect;
+    Fraction aFitXCorrection(1,1);
+    bool bContourFrame(IsContourTextFrame());
+
+    // get outliner set up. To avoid getting a somehow rotated MetaFile,
+    // temporarily disable object rotation.
+    sal_Int32 nAngle(aGeo.nRotationAngle);
+    aGeo.nRotationAngle = 0;
+    ImpSetupDrawOutlinerForPaint( bContourFrame, rOutliner, aTextRect, aAnchorRect, aPaintRect, aFitXCorrection );
+    aGeo.nRotationAngle = nAngle;
+
+    tools::Rectangle aScrollFrameRect(aPaintRect);
+    const SfxItemSet& rSet = GetObjectItemSet();
+    SdrTextAniDirection eDirection = rSet.Get(SDRATTR_TEXT_ANIDIRECTION).GetValue();
+
+    if(SdrTextAniDirection::Left == eDirection || SdrTextAniDirection::Right == eDirection)
+    {
+        aScrollFrameRect.SetLeft( aAnchorRect.Left() );
+        aScrollFrameRect.SetRight( aAnchorRect.Right() );
+    }
+
+    if(SdrTextAniDirection::Up == eDirection || SdrTextAniDirection::Down == eDirection)
+    {
+        aScrollFrameRect.SetTop( aAnchorRect.Top() );
+        aScrollFrameRect.SetBottom( aAnchorRect.Bottom() );
+    }
+
+    // create the MetaFile
+    pRetval = new GDIMetaFile;
+    ScopedVclPtrInstance< VirtualDevice > pBlackHole;
+    pBlackHole->EnableOutput(false);
+    pRetval->Record(pBlackHole);
+    Point aPaintPos = aPaintRect.TopLeft();
+
+    rOutliner.Draw(pBlackHole, aPaintPos);
+
+    pRetval->Stop();
+    pRetval->WindStart();
+
+    // return PaintRectanglePixel and pRetval;
+    rScrollRectangle = aScrollFrameRect;
+    rPaintRectangle = aPaintRect;
+
+    return pRetval;
+}
+
+// Access to TextAnimationAllowed flag
+bool SdrTextObj::IsAutoFit() const
+{
+    return GetFitToSize() == drawing::TextFitToSizeType_AUTOFIT;
+}
+
+bool SdrTextObj::IsFitToSize() const
+{
+    const drawing::TextFitToSizeType eFit = GetFitToSize();
+    return (eFit == drawing::TextFitToSizeType_PROPORTIONAL
+         || eFit == drawing::TextFitToSizeType_ALLLINES);
+}
+
+void SdrTextObj::SetTextAnimationAllowed(bool bNew)
+{
+    if(mbTextAnimationAllowed != bNew)
+    {
+        mbTextAnimationAllowed = bNew;
+        ActionChanged();
+    }
+}
+
+/** called from the SdrObjEditView during text edit when the status of the edit outliner changes */
+void SdrTextObj::onEditOutlinerStatusEvent( EditStatus* pEditStatus )
+{
+    const EditStatusFlags nStat = pEditStatus->GetStatusWord();
+    const bool bGrowX = bool(nStat & EditStatusFlags::TEXTWIDTHCHANGED);
+    const bool bGrowY = bool(nStat & EditStatusFlags::TextHeightChanged);
+    if(bTextFrame && (bGrowX || bGrowY))
+    {
+        if ((bGrowX && IsAutoGrowWidth()) || (bGrowY && IsAutoGrowHeight()))
+        {
+            AdjustTextFrameWidthAndHeight();
+        }
+        else if ( (IsAutoFit() || IsFitToSize()) && !mbInDownScale)
+        {
+            assert(pEdtOutl);
+            mbInDownScale = true;
+
+            // sucks that we cannot disable paints via
+            // pEdtOutl->SetUpdateMode(FALSE) - but EditEngine skips
+            // formatting as well, then.
+            ImpAutoFitText(*pEdtOutl);
+            mbInDownScale = false;
+        }
+    }
+}
+
+/* Begin chaining code */
+
+// XXX: Make it a method somewhere?
+static SdrObject *ImpGetObjByName(SdrObjList const *pObjList, OUString const& aObjName)
+{
+    // scan the whole list
+    size_t nObjCount = pObjList->GetObjCount();
+    for (size_t i = 0; i < nObjCount; i++) {
+        SdrObject *pCurObj = pObjList->GetObj(i);
+
+        if (pCurObj->GetName() == aObjName) {
+            return pCurObj;
+        }
+    }
+    // not found
+    return nullptr;
+}
+
+// XXX: Make it a (private) method of SdrTextObj
+static void ImpUpdateChainLinks(SdrTextObj *pTextObj, OUString const& aNextLinkName)
+{
+    // XXX: Current implementation constraints text boxes to be on the same page
+
+    // No next link
+    if (aNextLinkName.isEmpty()) {
+        pTextObj->SetNextLinkInChain(nullptr);
+        return;
+    }
+
+    SdrPage *pPage(pTextObj->getSdrPageFromSdrObject());
+    assert(pPage);
+    SdrTextObj *pNextTextObj = dynamic_cast< SdrTextObj * >
+                                (ImpGetObjByName(pPage, aNextLinkName));
+    if (!pNextTextObj) {
+        SAL_INFO("svx.chaining", "[CHAINING] Can't find object as next link.");
+        return;
+    }
+
+    pTextObj->SetNextLinkInChain(pNextTextObj);
+}
+
+bool SdrTextObj::IsChainable() const
+{
+    // Read it as item
+    const SfxItemSet& rSet = GetObjectItemSet();
+    OUString aNextLinkName = rSet.Get(SDRATTR_TEXT_CHAINNEXTNAME).GetValue();
+
+    // Update links if any inconsistency is found
+    bool bNextLinkUnsetYet = !aNextLinkName.isEmpty() && !mpNextInChain;
+    bool bInconsistentNextLink = mpNextInChain && mpNextInChain->GetName() != aNextLinkName;
+    // if the link is not set despite there should be one OR if it has changed
+    if (bNextLinkUnsetYet || bInconsistentNextLink) {
+        ImpUpdateChainLinks(const_cast<SdrTextObj *>(this), aNextLinkName);
+    }
+
+    return !aNextLinkName.isEmpty(); // XXX: Should we also check for GetNilChainingEvent? (see old code below)
+
+/*
+    // Check that no overflow is going on
+    if (!GetTextChain() || GetTextChain()->GetNilChainingEvent(this))
+        return false;
+*/
+}
+
+void SdrTextObj::onChainingEvent()
+{
+    if (!pEdtOutl)
+        return;
+
+    // Outliner for text transfer
+    SdrOutliner &aDrawOutliner = ImpGetDrawOutliner();
+
+    EditingTextChainFlow aTxtChainFlow(this);
+    aTxtChainFlow.CheckForFlowEvents(pEdtOutl);
+
+    if (aTxtChainFlow.IsOverflow()) {
+        SAL_INFO("svx.chaining", "[CHAINING] Overflow going on");
+        // One outliner is for non-overflowing text, the other for overflowing text
+        // We remove text directly from the editing outliner
+        aTxtChainFlow.ExecuteOverflow(pEdtOutl, &aDrawOutliner);
+    } else if (aTxtChainFlow.IsUnderflow()) {
+        SAL_INFO("svx.chaining", "[CHAINING] Underflow going on");
+        // underflow-induced overflow
+        aTxtChainFlow.ExecuteUnderflow(&aDrawOutliner);
+        bool bIsOverflowFromUnderflow = aTxtChainFlow.IsOverflow();
+        // handle overflow
+        if (bIsOverflowFromUnderflow) {
+            SAL_INFO("svx.chaining", "[CHAINING] Overflow going on (underflow induced)");
+            // prevents infinite loops when setting text for editing outliner
+            aTxtChainFlow.ExecuteOverflow(&aDrawOutliner, &aDrawOutliner);
+        }
+    }
+}
+
+SdrTextObj* SdrTextObj::GetNextLinkInChain() const
+{
+    /*
+    if (GetTextChain())
+        return GetTextChain()->GetNextLink(this);
+
+    return NULL;
+    */
+
+    return mpNextInChain;
+}
+
+void SdrTextObj::SetNextLinkInChain(SdrTextObj *pNextObj)
+{
+    // Basically a doubly linked list implementation
+
+    SdrTextObj *pOldNextObj = mpNextInChain;
+
+    // Replace next link
+    mpNextInChain = pNextObj;
+    // Deal with old next link's prev link
+    if (pOldNextObj) {
+        pOldNextObj->mpPrevInChain = nullptr;
+    }
+
+    // Deal with new next link's prev link
+    if (mpNextInChain) {
+        // If there is a prev already at all and this is not already the current object
+        if (mpNextInChain->mpPrevInChain &&
+            mpNextInChain->mpPrevInChain != this)
+            mpNextInChain->mpPrevInChain->mpNextInChain = nullptr;
+        mpNextInChain->mpPrevInChain = this;
+    }
+
+    // TODO: Introduce check for circular chains
+
+}
+
+SdrTextObj* SdrTextObj::GetPrevLinkInChain() const
+{
+    /*
+    if (GetTextChain())
+        return GetTextChain()->GetPrevLink(this);
+
+    return NULL;
+    */
+
+    return mpPrevInChain;
+}
+
+bool SdrTextObj::GetPreventChainable() const
+{
+    // Prevent chaining it 1) during dragging && 2) when we are editing next link
+    return mbIsUnchainableClone || (GetNextLinkInChain() && GetNextLinkInChain()->IsInEditMode());
+}
+
+SdrObjectUniquePtr SdrTextObj::getFullDragClone() const
+{
+    SdrObjectUniquePtr pClone = SdrAttrObj::getFullDragClone();
+    SdrTextObj *pTextObjClone = dynamic_cast<SdrTextObj *>(pClone.get());
+    if (pTextObjClone != nullptr) {
+        // Avoid transferring of text for chainable object during dragging
+        pTextObjClone->mbIsUnchainableClone = true;
+    }
+
+    return pClone;
+ }
+
+/* End chaining code */
+
+/** returns the currently active text. */
+SdrText* SdrTextObj::getActiveText() const
+{
+    if( !mpText )
+        return getText( 0 );
+    else
+        return mpText.get();
+}
+
+/** returns the nth available text. */
+SdrText* SdrTextObj::getText( sal_Int32 nIndex ) const
+{
+    if( nIndex == 0 )
+    {
+        if( !mpText )
+            const_cast< SdrTextObj* >(this)->mpText.reset( new SdrText( *const_cast< SdrTextObj* >(this) ) );
+        return mpText.get();
+    }
+    else
+    {
+        return nullptr;
+    }
+}
+
+/** returns the number of texts available for this object. */
+sal_Int32 SdrTextObj::getTextCount() const
+{
+    return 1;
+}
+
+/** changes the current active text */
+void SdrTextObj::setActiveText( sal_Int32 /*nIndex*/ )
+{
+}
+
+/** returns the index of the text that contains the given point or -1 */
+sal_Int32 SdrTextObj::CheckTextHit(const Point& /*rPnt*/) const
+{
+    return 0;
+}
+
+void SdrTextObj::SetObjectItemNoBroadcast(const SfxPoolItem& rItem)
+{
+    static_cast< sdr::properties::TextProperties& >(GetProperties()).SetObjectItemNoBroadcast(rItem);
+}
+
+
+// The concept of the text object:
+// ~~~~~~~~~~~~~~~~~~~~~~~~
+// Attributes/Variations:
+// - bool text frame / graphics object with caption
+// - bool FontWork                 (if it is not a text frame and not a ContourTextFrame)
+// - bool ContourTextFrame         (if it is not a text frame and not Fontwork)
+// - long rotation angle               (if it is not FontWork)
+// - long text frame margins           (if it is not FontWork)
+// - bool FitToSize                (if it is not FontWork)
+// - bool AutoGrowingWidth/Height  (if it is not FitToSize and not FontWork)
+// - long Min/MaxFrameWidth/Height     (if AutoGrowingWidth/Height)
+// - enum horizontal text anchoring left,center,right,justify/block,Stretch(ni)
+// - enum vertical text anchoring top, middle, bottom, block, stretch(ni)
+// - enum ticker text                  (if it is not FontWork)
+
+// Every derived object is either a text frame (bTextFrame=true)
+// or a drawing object with a caption (bTextFrame=false).
+
+// Default anchoring for text frames:
+//   SDRTEXTHORZADJUST_BLOCK, SDRTEXTVERTADJUST_TOP
+//   = static Pool defaults
+// Default anchoring for drawing objects with a caption:
+//   SDRTEXTHORZADJUST_CENTER, SDRTEXTVERTADJUST_CENTER
+//   via "hard" attribution of SdrAttrObj
+
+// Every object derived from SdrTextObj must return an "UnrotatedSnapRect"
+// (->TakeUnrotatedSnapRect()) (the reference point for the rotation is the top
+// left of the rectangle (aGeo.nRotationAngle)) which is the basis for anchoring
+// text. We then subtract the text frame margins from this rectangle, as a re-
+// sult we get the anchoring area (->TakeTextAnchorRect()). Within this area, we
+// calculate the anchoring point and the painting area, depending on the hori-
+// zontal and vertical adjustment of the text (SdrTextVertAdjust,
+// SdrTextHorzAdjust).
+// In the case of drawing objects with a caption the painting area might well
+// be larger than the anchoring area, for text frames on the other hand, it is
+// always of the same or a smaller size (except when there are negative text
+// frame margins).
+
+// FitToSize takes priority over text anchoring and AutoGrowHeight/Width. When
+// FitToSize is turned on, the painting area is always equal to the anchoring
+// area. Additionally, FitToSize doesn't allow automatic line breaks.
+
+// ContourTextFrame:
+// - long rotation angle
+// - long text frame margins (maybe later)
+// - bool FitToSize (maybe later)
+// - bool AutoGrowingWidth/Height (maybe much later)
+// - long Min/MaxFrameWidth/Height (maybe much later)
+// - enum horizontal text anchoring (maybe later, for now: left, centered)
+// - enum vertical text anchoring (maybe later, for now: top)
+// - enum ticker text (maybe later, maybe even with correct clipping)
+
+// When making changes, check these:
+// - Paint
+// - HitTest
+// - ConvertToPoly
+// - Edit
+// - Printing, Saving, Painting in neighboring View while editing
+// - ModelChanged (e. g. through a neighboring View or rulers) while editing
+// - FillColorChanged while editing
+// - and many more...
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotextdecomposition.cxx b/svx/source/svdraw/svdotextdecomposition.cxx
new file mode 100644
index 000000000..3e67fe51b
--- /dev/null
+++ b/svx/source/svdraw/svdotextdecomposition.cxx
@@ -0,0 +1,1680 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdetc.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/sdasitm.hxx>
+#include <textchain.hxx>
+#include <textchainflow.hxx>
+#include <svx/sdtacitm.hxx>
+#include <svx/sdtayitm.hxx>
+#include <svx/sdtaiitm.hxx>
+#include <svx/sdtaaitm.hxx>
+#include <svx/xfillit0.hxx>
+#include <basegfx/vector/b2dvector.hxx>
+#include <sdr/primitive2d/sdrtextprimitive2d.hxx>
+#include <drawinglayer/primitive2d/textprimitive2d.hxx>
+#include <drawinglayer/primitive2d/textdecoratedprimitive2d.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <editeng/eeitem.hxx>
+#include <editeng/editstat.hxx>
+#include <tools/helpers.hxx>
+#include <svl/itemset.hxx>
+#include <drawinglayer/animation/animationtiming.hxx>
+#include <basegfx/color/bcolor.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/canvastools.hxx>
+#include <editeng/escapementitem.hxx>
+#include <editeng/svxenum.hxx>
+#include <editeng/flditem.hxx>
+#include <editeng/adjustitem.hxx>
+#include <drawinglayer/primitive2d/texthierarchyprimitive2d.hxx>
+#include <drawinglayer/primitive2d/wrongspellprimitive2d.hxx>
+#include <drawinglayer/primitive2d/graphicprimitive2d.hxx>
+#include <drawinglayer/primitive2d/textlayoutdevice.hxx>
+#include <drawinglayer/primitive2d/unifiedtransparenceprimitive2d.hxx>
+#include <svx/unoapi.hxx>
+#include <drawinglayer/geometry/viewinformation2d.hxx>
+#include <editeng/outlobj.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <sal/log.hxx>
+
+using namespace com::sun::star;
+
+// helpers
+
+namespace
+{
+    class impTextBreakupHandler
+    {
+    private:
+        drawinglayer::primitive2d::Primitive2DContainer             maTextPortionPrimitives;
+        drawinglayer::primitive2d::Primitive2DContainer             maLinePrimitives;
+        drawinglayer::primitive2d::Primitive2DContainer             maParagraphPrimitives;
+
+        SdrOutliner&                                                mrOutliner;
+        basegfx::B2DHomMatrix                                       maNewTransformA;
+        basegfx::B2DHomMatrix                                       maNewTransformB;
+
+        // the visible area for contour text decomposition
+        basegfx::B2DVector                                          maScale;
+
+        // ClipRange for BlockText decomposition; only text portions completely
+        // inside are to be accepted, so this is different from geometric clipping
+        // (which would allow e.g. upper parts of portions to remain). Only used for
+        // BlockText (see there)
+        basegfx::B2DRange                                           maClipRange;
+
+        DECL_LINK(decomposeContourTextPrimitive, DrawPortionInfo*, void);
+        DECL_LINK(decomposeBlockTextPrimitive, DrawPortionInfo*, void);
+        DECL_LINK(decomposeStretchTextPrimitive, DrawPortionInfo*, void);
+
+        DECL_LINK(decomposeContourBulletPrimitive, DrawBulletInfo*, void);
+        DECL_LINK(decomposeBlockBulletPrimitive, DrawBulletInfo*, void);
+        DECL_LINK(decomposeStretchBulletPrimitive, DrawBulletInfo*, void);
+
+        void impCreateTextPortionPrimitive(const DrawPortionInfo& rInfo);
+        static drawinglayer::primitive2d::BasePrimitive2D* impCheckFieldPrimitive(drawinglayer::primitive2d::BasePrimitive2D* pPrimitive, const DrawPortionInfo& rInfo);
+        void impFlushTextPortionPrimitivesToLinePrimitives();
+        void impFlushLinePrimitivesToParagraphPrimitives(sal_Int32 nPara);
+        void impHandleDrawPortionInfo(const DrawPortionInfo& rInfo);
+        void impHandleDrawBulletInfo(const DrawBulletInfo& rInfo);
+
+    public:
+        explicit impTextBreakupHandler(SdrOutliner& rOutliner)
+        :   maTextPortionPrimitives(),
+            maLinePrimitives(),
+            maParagraphPrimitives(),
+            mrOutliner(rOutliner),
+            maNewTransformA(),
+            maNewTransformB(),
+            maScale(),
+            maClipRange()
+        {
+        }
+
+        void decomposeContourTextPrimitive(const basegfx::B2DHomMatrix& rNewTransformA, const basegfx::B2DHomMatrix& rNewTransformB, const basegfx::B2DVector& rScale)
+        {
+            maScale = rScale;
+            maNewTransformA = rNewTransformA;
+            maNewTransformB = rNewTransformB;
+            mrOutliner.SetDrawPortionHdl(LINK(this, impTextBreakupHandler, decomposeContourTextPrimitive));
+            mrOutliner.SetDrawBulletHdl(LINK(this, impTextBreakupHandler, decomposeContourBulletPrimitive));
+            mrOutliner.StripPortions();
+            mrOutliner.SetDrawPortionHdl(Link<DrawPortionInfo*,void>());
+            mrOutliner.SetDrawBulletHdl(Link<DrawBulletInfo*,void>());
+        }
+
+        void decomposeBlockTextPrimitive(
+            const basegfx::B2DHomMatrix& rNewTransformA,
+            const basegfx::B2DHomMatrix& rNewTransformB,
+            const basegfx::B2DRange& rClipRange)
+        {
+            maNewTransformA = rNewTransformA;
+            maNewTransformB = rNewTransformB;
+            maClipRange = rClipRange;
+            mrOutliner.SetDrawPortionHdl(LINK(this, impTextBreakupHandler, decomposeBlockTextPrimitive));
+            mrOutliner.SetDrawBulletHdl(LINK(this, impTextBreakupHandler, decomposeBlockBulletPrimitive));
+            mrOutliner.StripPortions();
+            mrOutliner.SetDrawPortionHdl(Link<DrawPortionInfo*,void>());
+            mrOutliner.SetDrawBulletHdl(Link<DrawBulletInfo*,void>());
+        }
+
+        void decomposeStretchTextPrimitive(const basegfx::B2DHomMatrix& rNewTransformA, const basegfx::B2DHomMatrix& rNewTransformB)
+        {
+            maNewTransformA = rNewTransformA;
+            maNewTransformB = rNewTransformB;
+            mrOutliner.SetDrawPortionHdl(LINK(this, impTextBreakupHandler, decomposeStretchTextPrimitive));
+            mrOutliner.SetDrawBulletHdl(LINK(this, impTextBreakupHandler, decomposeStretchBulletPrimitive));
+            mrOutliner.StripPortions();
+            mrOutliner.SetDrawPortionHdl(Link<DrawPortionInfo*,void>());
+            mrOutliner.SetDrawBulletHdl(Link<DrawBulletInfo*,void>());
+        }
+
+        drawinglayer::primitive2d::Primitive2DContainer const & getPrimitive2DSequence();
+    };
+
+    void impTextBreakupHandler::impCreateTextPortionPrimitive(const DrawPortionInfo& rInfo)
+    {
+        if(rInfo.maText.isEmpty() || !rInfo.mnTextLen)
+            return;
+
+        OUString caseMappedText = rInfo.mrFont.CalcCaseMap( rInfo.maText );
+        basegfx::B2DVector aFontScaling;
+        drawinglayer::attribute::FontAttribute aFontAttribute(
+            drawinglayer::primitive2d::getFontAttributeFromVclFont(
+                aFontScaling,
+                rInfo.mrFont,
+                rInfo.IsRTL(),
+                false));
+        basegfx::B2DHomMatrix aNewTransform;
+
+        // add font scale to new transform
+        aNewTransform.scale(aFontScaling.getX(), aFontScaling.getY());
+
+        // look for proportional font scaling, if necessary, scale accordingly
+        sal_Int8 nPropr(rInfo.mrFont.GetPropr());
+        if(100 != nPropr)
+        {
+            const double fFactor(rInfo.mrFont.GetPropr() / 100.0);
+            aNewTransform.scale(fFactor, fFactor);
+        }
+
+        // apply font rotate
+        if(rInfo.mrFont.GetOrientation())
+        {
+            aNewTransform.rotate(-rInfo.mrFont.GetOrientation() * F_PI1800);
+        }
+
+        // look for escapement, if necessary, translate accordingly
+        if(rInfo.mrFont.GetEscapement())
+        {
+            sal_Int16 nEsc(rInfo.mrFont.GetEscapement());
+
+            if(DFLT_ESC_AUTO_SUPER == nEsc)
+            {
+                nEsc = .8 * (100 - nPropr);
+                assert (nEsc == DFLT_ESC_SUPER && "I'm sure this formula needs to be changed, but how to confirm that???");
+                nEsc = DFLT_ESC_SUPER;
+            }
+            else if(DFLT_ESC_AUTO_SUB == nEsc)
+            {
+                nEsc = .2 * -(100 - nPropr);
+                assert (nEsc == -20 && "I'm sure this formula needs to be changed, but how to confirm that???");
+                nEsc = -20;
+            }
+
+            if(nEsc > MAX_ESC_POS)
+            {
+                nEsc = MAX_ESC_POS;
+            }
+            else if(nEsc < -MAX_ESC_POS)
+            {
+                nEsc = -MAX_ESC_POS;
+            }
+
+            const double fEscapement(nEsc / -100.0);
+            aNewTransform.translate(0.0, fEscapement * aFontScaling.getY());
+        }
+
+        // apply transformA
+        aNewTransform *= maNewTransformA;
+
+        // apply local offset
+        aNewTransform.translate(rInfo.mrStartPos.X(), rInfo.mrStartPos.Y());
+
+        // also apply embedding object's transform
+        aNewTransform *= maNewTransformB;
+
+        // prepare DXArray content. To make it independent from font size (and such from
+        // the text transformation), scale it to unit coordinates
+        ::std::vector< double > aDXArray;
+
+        if(rInfo.mpDXArray && rInfo.mnTextLen)
+        {
+            aDXArray.reserve(rInfo.mnTextLen);
+
+            for(sal_Int32 a=0; a < rInfo.mnTextLen; a++)
+            {
+                aDXArray.push_back(static_cast<double>(rInfo.mpDXArray[a]));
+            }
+        }
+
+        // create complex text primitive and append
+        const Color aFontColor(rInfo.mrFont.GetColor());
+        const basegfx::BColor aBFontColor(aFontColor.getBColor());
+
+        const Color aTextFillColor(rInfo.mrFont.GetFillColor());
+
+        // prepare wordLineMode (for underline and strikeout)
+        // NOT for bullet texts. It is set (this may be an error by itself), but needs to be suppressed to hinder e.g. '1)'
+        // to be split which would not look like the original
+        const bool bWordLineMode(rInfo.mrFont.IsWordLineMode() && !rInfo.mbEndOfBullet);
+
+        // prepare new primitive
+        drawinglayer::primitive2d::BasePrimitive2D* pNewPrimitive = nullptr;
+        const bool bDecoratedIsNeeded(
+               LINESTYLE_NONE != rInfo.mrFont.GetOverline()
+            || LINESTYLE_NONE != rInfo.mrFont.GetUnderline()
+            || STRIKEOUT_NONE != rInfo.mrFont.GetStrikeout()
+            || FontEmphasisMark::NONE != (rInfo.mrFont.GetEmphasisMark() & FontEmphasisMark::Style)
+            || FontRelief::NONE != rInfo.mrFont.GetRelief()
+            || rInfo.mrFont.IsShadow()
+            || bWordLineMode);
+
+        if(bDecoratedIsNeeded)
+        {
+            // TextDecoratedPortionPrimitive2D needed, prepare some more data
+            // get overline and underline color. If it's on automatic (0xffffffff) use FontColor instead
+            const Color aUnderlineColor(rInfo.maTextLineColor);
+            const basegfx::BColor aBUnderlineColor((Color(0xffffffff) == aUnderlineColor) ? aBFontColor : aUnderlineColor.getBColor());
+            const Color aOverlineColor(rInfo.maOverlineColor);
+            const basegfx::BColor aBOverlineColor((Color(0xffffffff) == aOverlineColor) ? aBFontColor : aOverlineColor.getBColor());
+
+            // prepare overline and underline data
+            const drawinglayer::primitive2d::TextLine eFontOverline(
+                drawinglayer::primitive2d::mapFontLineStyleToTextLine(rInfo.mrFont.GetOverline()));
+            const drawinglayer::primitive2d::TextLine eFontLineStyle(
+                drawinglayer::primitive2d::mapFontLineStyleToTextLine(rInfo.mrFont.GetUnderline()));
+
+            // check UnderlineAbove
+            const bool bUnderlineAbove(
+                drawinglayer::primitive2d::TEXT_LINE_NONE != eFontLineStyle && rInfo.mrFont.IsUnderlineAbove());
+
+            // prepare strikeout data
+            const drawinglayer::primitive2d::TextStrikeout eTextStrikeout(
+                drawinglayer::primitive2d::mapFontStrikeoutToTextStrikeout(rInfo.mrFont.GetStrikeout()));
+
+            // prepare emphasis mark data
+            drawinglayer::primitive2d::TextEmphasisMark eTextEmphasisMark(drawinglayer::primitive2d::TEXT_FONT_EMPHASIS_MARK_NONE);
+
+            switch(rInfo.mrFont.GetEmphasisMark() & FontEmphasisMark::Style)
+            {
+                case FontEmphasisMark::Dot : eTextEmphasisMark = drawinglayer::primitive2d::TEXT_FONT_EMPHASIS_MARK_DOT; break;
+                case FontEmphasisMark::Circle : eTextEmphasisMark = drawinglayer::primitive2d::TEXT_FONT_EMPHASIS_MARK_CIRCLE; break;
+                case FontEmphasisMark::Disc : eTextEmphasisMark = drawinglayer::primitive2d::TEXT_FONT_EMPHASIS_MARK_DISC; break;
+                case FontEmphasisMark::Accent : eTextEmphasisMark = drawinglayer::primitive2d::TEXT_FONT_EMPHASIS_MARK_ACCENT; break;
+                default: break;
+            }
+
+            const bool bEmphasisMarkAbove(rInfo.mrFont.GetEmphasisMark() & FontEmphasisMark::PosAbove);
+            const bool bEmphasisMarkBelow(rInfo.mrFont.GetEmphasisMark() & FontEmphasisMark::PosBelow);
+
+            // prepare font relief data
+            drawinglayer::primitive2d::TextRelief eTextRelief(drawinglayer::primitive2d::TEXT_RELIEF_NONE);
+
+            switch(rInfo.mrFont.GetRelief())
+            {
+                case FontRelief::Embossed : eTextRelief = drawinglayer::primitive2d::TEXT_RELIEF_EMBOSSED; break;
+                case FontRelief::Engraved : eTextRelief = drawinglayer::primitive2d::TEXT_RELIEF_ENGRAVED; break;
+                default : break; // RELIEF_NONE, FontRelief_FORCE_EQUAL_SIZE
+            }
+
+            // prepare shadow/outline data
+            const bool bShadow(rInfo.mrFont.IsShadow());
+
+            // TextDecoratedPortionPrimitive2D is needed, create one
+            pNewPrimitive = new drawinglayer::primitive2d::TextDecoratedPortionPrimitive2D(
+
+                // attributes for TextSimplePortionPrimitive2D
+                aNewTransform,
+                caseMappedText,
+                rInfo.mnTextStart,
+                rInfo.mnTextLen,
+                aDXArray,
+                aFontAttribute,
+                rInfo.mpLocale ? *rInfo.mpLocale : css::lang::Locale(),
+                aBFontColor,
+                aTextFillColor,
+
+                // attributes for TextDecoratedPortionPrimitive2D
+                aBOverlineColor,
+                aBUnderlineColor,
+                eFontOverline,
+                eFontLineStyle,
+                bUnderlineAbove,
+                eTextStrikeout,
+                bWordLineMode,
+                eTextEmphasisMark,
+                bEmphasisMarkAbove,
+                bEmphasisMarkBelow,
+                eTextRelief,
+                bShadow);
+        }
+        else
+        {
+            // TextSimplePortionPrimitive2D is enough
+            pNewPrimitive = new drawinglayer::primitive2d::TextSimplePortionPrimitive2D(
+                aNewTransform,
+                caseMappedText,
+                rInfo.mnTextStart,
+                rInfo.mnTextLen,
+                aDXArray,
+                aFontAttribute,
+                rInfo.mpLocale ? *rInfo.mpLocale : css::lang::Locale(),
+                aBFontColor,
+                rInfo.mbFilled,
+                rInfo.mnWidthToFill,
+                aTextFillColor);
+        }
+
+        if (aFontColor.GetTransparency() != 0)
+        {
+            // Handle semi-transparent text for both the decorated and simple case here.
+            pNewPrimitive = new drawinglayer::primitive2d::UnifiedTransparencePrimitive2D(
+                drawinglayer::primitive2d::Primitive2DContainer{ pNewPrimitive },
+                aFontColor.GetTransparency() / 255.0);
+        }
+
+        if(rInfo.mbEndOfBullet)
+        {
+            // embed in TextHierarchyBulletPrimitive2D
+            const drawinglayer::primitive2d::Primitive2DReference aNewReference(pNewPrimitive);
+            const drawinglayer::primitive2d::Primitive2DContainer aNewSequence { aNewReference } ;
+            pNewPrimitive = new drawinglayer::primitive2d::TextHierarchyBulletPrimitive2D(aNewSequence);
+        }
+
+        if(rInfo.mpFieldData)
+        {
+            pNewPrimitive = impCheckFieldPrimitive(pNewPrimitive, rInfo);
+        }
+
+        maTextPortionPrimitives.push_back(pNewPrimitive);
+
+        // support for WrongSpellVector. Create WrongSpellPrimitives as needed
+        if(rInfo.mpWrongSpellVector && !aDXArray.empty())
+        {
+            const sal_Int32 nSize(rInfo.mpWrongSpellVector->size());
+            const sal_Int32 nDXCount(aDXArray.size());
+            const basegfx::BColor aSpellColor(1.0, 0.0, 0.0); // red, hard coded
+
+            for(sal_Int32 a(0); a < nSize; a++)
+            {
+                const EEngineData::WrongSpellClass& rCandidate = (*rInfo.mpWrongSpellVector)[a];
+
+                if(rCandidate.nStart >= rInfo.mnTextStart && rCandidate.nEnd >= rInfo.mnTextStart && rCandidate.nEnd > rCandidate.nStart)
+                {
+                    const sal_Int32 nStart(rCandidate.nStart - rInfo.mnTextStart);
+                    const sal_Int32 nEnd(rCandidate.nEnd - rInfo.mnTextStart);
+                    double fStart(0.0);
+                    double fEnd(0.0);
+
+                    if(nStart > 0 && nStart - 1 < nDXCount)
+                    {
+                        fStart = aDXArray[nStart - 1];
+                    }
+
+                    if(nEnd > 0 && nEnd - 1 < nDXCount)
+                    {
+                        fEnd = aDXArray[nEnd - 1];
+                    }
+
+                    if(!basegfx::fTools::equal(fStart, fEnd))
+                    {
+                        if(rInfo.IsRTL())
+                        {
+                            // #i98523#
+                            // When the portion is RTL, mirror the redlining using the
+                            // full portion width
+                            const double fTextWidth(aDXArray[aDXArray.size() - 1]);
+
+                            fStart = fTextWidth - fStart;
+                            fEnd = fTextWidth - fEnd;
+                        }
+
+                        // need to take FontScaling out of values; it's already part of
+                        // aNewTransform and would be double applied
+                        const double fFontScaleX(aFontScaling.getX());
+
+                        if(!basegfx::fTools::equal(fFontScaleX, 1.0)
+                            && !basegfx::fTools::equalZero(fFontScaleX))
+                        {
+                            fStart /= fFontScaleX;
+                            fEnd /= fFontScaleX;
+                        }
+
+                        maTextPortionPrimitives.push_back(new drawinglayer::primitive2d::WrongSpellPrimitive2D(
+                            aNewTransform,
+                            fStart,
+                            fEnd,
+                            aSpellColor));
+                    }
+                }
+            }
+        }
+    }
+
+    drawinglayer::primitive2d::BasePrimitive2D* impTextBreakupHandler::impCheckFieldPrimitive(drawinglayer::primitive2d::BasePrimitive2D* pPrimitive, const DrawPortionInfo& rInfo)
+    {
+        if(rInfo.mpFieldData)
+        {
+            // Support for FIELD_SEQ_BEGIN, FIELD_SEQ_END. If used, create a TextHierarchyFieldPrimitive2D
+            // which holds the field type and, if applicable, the URL
+            const SvxURLField* pURLField = dynamic_cast< const SvxURLField* >(rInfo.mpFieldData);
+            const SvxPageField* pPageField = dynamic_cast< const SvxPageField* >(rInfo.mpFieldData);
+
+            // embed current primitive to a sequence
+            drawinglayer::primitive2d::Primitive2DContainer aSequence;
+
+            if(pPrimitive)
+            {
+                aSequence.resize(1);
+                aSequence[0] = drawinglayer::primitive2d::Primitive2DReference(pPrimitive);
+            }
+
+            if(pURLField)
+            {
+                // extended this to hold more of the contents of the original
+                // SvxURLField since that stuff is still used in HitTest and e.g. Calc
+                std::vector< std::pair< OUString, OUString>> meValues;
+                meValues.emplace_back("URL", pURLField->GetURL());
+                meValues.emplace_back("Representation", pURLField->GetRepresentation());
+                meValues.emplace_back("TargetFrame", pURLField->GetTargetFrame());
+                meValues.emplace_back("SvxURLFormat", OUString::number(static_cast<sal_uInt16>(pURLField->GetFormat())));
+                pPrimitive = new drawinglayer::primitive2d::TextHierarchyFieldPrimitive2D(aSequence, drawinglayer::primitive2d::FIELD_TYPE_URL, &meValues);
+            }
+            else if(pPageField)
+            {
+                pPrimitive = new drawinglayer::primitive2d::TextHierarchyFieldPrimitive2D(aSequence, drawinglayer::primitive2d::FIELD_TYPE_PAGE);
+            }
+            else
+            {
+                pPrimitive = new drawinglayer::primitive2d::TextHierarchyFieldPrimitive2D(aSequence, drawinglayer::primitive2d::FIELD_TYPE_COMMON);
+            }
+        }
+
+        return pPrimitive;
+    }
+
+    void impTextBreakupHandler::impFlushTextPortionPrimitivesToLinePrimitives()
+    {
+        // only create a line primitive when we had content; there is no need for
+        // empty line primitives (contrary to paragraphs, see below).
+        if(!maTextPortionPrimitives.empty())
+        {
+            maLinePrimitives.push_back(new drawinglayer::primitive2d::TextHierarchyLinePrimitive2D(maTextPortionPrimitives));
+            maTextPortionPrimitives.clear();
+        }
+    }
+
+    void impTextBreakupHandler::impFlushLinePrimitivesToParagraphPrimitives(sal_Int32 nPara)
+    {
+        sal_Int16 nDepth = mrOutliner.GetDepth(nPara);
+        EBulletInfo eInfo = mrOutliner.GetBulletInfo(nPara);
+        // Pass -1 to signal VclMetafileProcessor2D that there is no active
+        // bullets/numbering in this paragraph (i.e. this is normal text)
+        const sal_Int16 nOutlineLevel( eInfo.bVisible ?  nDepth : -1);
+
+        // ALWAYS create a paragraph primitive, even when no content was added. This is done to
+        // have the correct paragraph count even with empty paragraphs. Those paragraphs will
+        // have an empty sub-PrimitiveSequence.
+        maParagraphPrimitives.push_back(
+            new drawinglayer::primitive2d::TextHierarchyParagraphPrimitive2D(
+                maLinePrimitives,
+                nOutlineLevel));
+        maLinePrimitives.clear();
+    }
+
+    void impTextBreakupHandler::impHandleDrawPortionInfo(const DrawPortionInfo& rInfo)
+    {
+        impCreateTextPortionPrimitive(rInfo);
+
+        if(rInfo.mbEndOfLine || rInfo.mbEndOfParagraph)
+        {
+            impFlushTextPortionPrimitivesToLinePrimitives();
+        }
+
+        if(rInfo.mbEndOfParagraph)
+        {
+            impFlushLinePrimitivesToParagraphPrimitives(rInfo.mnPara);
+        }
+    }
+
+    void impTextBreakupHandler::impHandleDrawBulletInfo(const DrawBulletInfo& rInfo)
+    {
+        basegfx::B2DHomMatrix aNewTransform;
+
+        // add size to new transform
+        aNewTransform.scale(rInfo.maBulletSize.getWidth(), rInfo.maBulletSize.getHeight());
+
+        // apply transformA
+        aNewTransform *= maNewTransformA;
+
+        // apply local offset
+        aNewTransform.translate(rInfo.maBulletPosition.X(), rInfo.maBulletPosition.Y());
+
+        // also apply embedding object's transform
+        aNewTransform *= maNewTransformB;
+
+        // prepare empty GraphicAttr
+        const GraphicAttr aGraphicAttr;
+
+        // create GraphicPrimitive2D
+        const drawinglayer::primitive2d::Primitive2DReference aNewReference(new drawinglayer::primitive2d::GraphicPrimitive2D(
+            aNewTransform,
+            rInfo.maBulletGraphicObject,
+            aGraphicAttr));
+
+        // embed in TextHierarchyBulletPrimitive2D
+        const drawinglayer::primitive2d::Primitive2DContainer aNewSequence { aNewReference };
+        drawinglayer::primitive2d::BasePrimitive2D* pNewPrimitive = new drawinglayer::primitive2d::TextHierarchyBulletPrimitive2D(aNewSequence);
+
+        // add to output
+        maTextPortionPrimitives.push_back(pNewPrimitive);
+    }
+
+    IMPL_LINK(impTextBreakupHandler, decomposeContourTextPrimitive, DrawPortionInfo*, pInfo, void)
+    {
+        // for contour text, ignore (clip away) all portions which are below
+        // the visible area given by maScale
+        if(pInfo && static_cast<double>(pInfo->mrStartPos.Y()) < maScale.getY())
+        {
+            impHandleDrawPortionInfo(*pInfo);
+        }
+    }
+
+    IMPL_LINK(impTextBreakupHandler, decomposeBlockTextPrimitive, DrawPortionInfo*, pInfo, void)
+    {
+        if(pInfo)
+        {
+            // Is clipping wanted? This is text clipping; only accept a portion
+            // if it's completely in the range
+            if(!maClipRange.isEmpty())
+            {
+                // Test start position first; this allows to not get the text range at
+                // all if text is far outside
+                const basegfx::B2DPoint aStartPosition(pInfo->mrStartPos.X(), pInfo->mrStartPos.Y());
+
+                if(!maClipRange.isInside(aStartPosition))
+                {
+                    return;
+                }
+
+                // Start position is inside. Get TextBoundRect and TopLeft next
+                drawinglayer::primitive2d::TextLayouterDevice aTextLayouterDevice;
+                aTextLayouterDevice.setFont(pInfo->mrFont);
+
+                const basegfx::B2DRange aTextBoundRect(
+                    aTextLayouterDevice.getTextBoundRect(
+                        pInfo->maText, pInfo->mnTextStart, pInfo->mnTextLen));
+                const basegfx::B2DPoint aTopLeft(aTextBoundRect.getMinimum() + aStartPosition);
+
+                if(!maClipRange.isInside(aTopLeft))
+                {
+                    return;
+                }
+
+                // TopLeft is inside. Get BottomRight and check
+                const basegfx::B2DPoint aBottomRight(aTextBoundRect.getMaximum() + aStartPosition);
+
+                if(!maClipRange.isInside(aBottomRight))
+                {
+                    return;
+                }
+
+                // all inside, clip was successful
+            }
+            impHandleDrawPortionInfo(*pInfo);
+        }
+    }
+
+    IMPL_LINK(impTextBreakupHandler, decomposeStretchTextPrimitive, DrawPortionInfo*, pInfo, void)
+    {
+        if(pInfo)
+        {
+            impHandleDrawPortionInfo(*pInfo);
+        }
+    }
+
+    IMPL_LINK(impTextBreakupHandler, decomposeContourBulletPrimitive, DrawBulletInfo*, pInfo, void)
+    {
+        if(pInfo)
+        {
+            impHandleDrawBulletInfo(*pInfo);
+        }
+    }
+
+    IMPL_LINK(impTextBreakupHandler, decomposeBlockBulletPrimitive, DrawBulletInfo*, pInfo, void)
+    {
+        if(pInfo)
+        {
+            impHandleDrawBulletInfo(*pInfo);
+        }
+    }
+
+    IMPL_LINK(impTextBreakupHandler, decomposeStretchBulletPrimitive, DrawBulletInfo*, pInfo, void)
+    {
+        if(pInfo)
+        {
+            impHandleDrawBulletInfo(*pInfo);
+        }
+    }
+
+    drawinglayer::primitive2d::Primitive2DContainer const & impTextBreakupHandler::getPrimitive2DSequence()
+    {
+        if(!maTextPortionPrimitives.empty())
+        {
+            // collect non-closed lines
+            impFlushTextPortionPrimitivesToLinePrimitives();
+        }
+
+        if(!maLinePrimitives.empty())
+        {
+            // collect non-closed paragraphs
+            impFlushLinePrimitivesToParagraphPrimitives(mrOutliner.GetParagraphCount() - 1);
+        }
+
+        return maParagraphPrimitives;
+    }
+} // end of anonymous namespace
+
+
+// primitive decompositions
+
+void SdrTextObj::impDecomposeContourTextPrimitive(
+    drawinglayer::primitive2d::Primitive2DContainer& rTarget,
+    const drawinglayer::primitive2d::SdrContourTextPrimitive2D& rSdrContourTextPrimitive,
+    const drawinglayer::geometry::ViewInformation2D& aViewInformation) const
+{
+    // decompose matrix to have position and size of text
+    basegfx::B2DVector aScale, aTranslate;
+    double fRotate, fShearX;
+    rSdrContourTextPrimitive.getObjectTransform().decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // prepare contour polygon, force to non-mirrored for laying out
+    basegfx::B2DPolyPolygon aPolyPolygon(rSdrContourTextPrimitive.getUnitPolyPolygon());
+    aPolyPolygon.transform(basegfx::utils::createScaleB2DHomMatrix(fabs(aScale.getX()), fabs(aScale.getY())));
+
+    // prepare outliner
+    SolarMutexGuard aSolarGuard;
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+    const Size aNullSize;
+    rOutliner.SetPaperSize(aNullSize);
+    rOutliner.SetPolygon(aPolyPolygon);
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetText(rSdrContourTextPrimitive.getOutlinerParaObject());
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+
+    // prepare matrices to apply to newly created primitives
+    basegfx::B2DHomMatrix aNewTransformA;
+
+    // mirroring. We are now in the polygon sizes. When mirroring in X and Y,
+    // move the null point which was top left to bottom right.
+    const bool bMirrorX(basegfx::fTools::less(aScale.getX(), 0.0));
+    const bool bMirrorY(basegfx::fTools::less(aScale.getY(), 0.0));
+
+    // in-between the translations of the single primitives will take place. Afterwards,
+    // the object's transformations need to be applied
+    const basegfx::B2DHomMatrix aNewTransformB(basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+        bMirrorX ? -1.0 : 1.0, bMirrorY ? -1.0 : 1.0,
+        fShearX, fRotate, aTranslate.getX(), aTranslate.getY()));
+
+    // now break up text primitives.
+    impTextBreakupHandler aConverter(rOutliner);
+    aConverter.decomposeContourTextPrimitive(aNewTransformA, aNewTransformB, aScale);
+
+    // cleanup outliner
+    rOutliner.Clear();
+    rOutliner.setVisualizedPage(nullptr);
+
+    rTarget = aConverter.getPrimitive2DSequence();
+}
+
+void SdrTextObj::impDecomposeAutoFitTextPrimitive(
+    drawinglayer::primitive2d::Primitive2DContainer& rTarget,
+    const drawinglayer::primitive2d::SdrAutoFitTextPrimitive2D& rSdrAutofitTextPrimitive,
+    const drawinglayer::geometry::ViewInformation2D& aViewInformation) const
+{
+    // decompose matrix to have position and size of text
+    basegfx::B2DVector aScale, aTranslate;
+    double fRotate, fShearX;
+    rSdrAutofitTextPrimitive.getTextRangeTransform().decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // use B2DRange aAnchorTextRange for calculations
+    basegfx::B2DRange aAnchorTextRange(aTranslate);
+    aAnchorTextRange.expand(aTranslate + aScale);
+
+    // prepare outliner
+    const SfxItemSet& rTextItemSet = rSdrAutofitTextPrimitive.getSdrText()->GetItemSet();
+    SolarMutexGuard aSolarGuard;
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+    SdrTextVertAdjust eVAdj = GetTextVerticalAdjust(rTextItemSet);
+    SdrTextHorzAdjust eHAdj = GetTextHorizontalAdjust(rTextItemSet);
+    const EEControlBits nOriginalControlWord(rOutliner.GetControlWord());
+    const Size aNullSize;
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+
+    rOutliner.SetControlWord(nOriginalControlWord|EEControlBits::AUTOPAGESIZE|EEControlBits::STRETCHING);
+    rOutliner.SetMinAutoPaperSize(aNullSize);
+    rOutliner.SetMaxAutoPaperSize(Size(1000000,1000000));
+
+    // add one to rage sizes to get back to the old Rectangle and outliner measurements
+    const sal_uInt32 nAnchorTextWidth(FRound(aAnchorTextRange.getWidth() + 1));
+    const sal_uInt32 nAnchorTextHeight(FRound(aAnchorTextRange.getHeight() + 1));
+    const OutlinerParaObject* pOutlinerParaObject = rSdrAutofitTextPrimitive.getSdrText()->GetOutlinerParaObject();
+    OSL_ENSURE(pOutlinerParaObject, "impDecomposeBlockTextPrimitive used with no OutlinerParaObject (!)");
+    const bool bVerticalWriting(pOutlinerParaObject->IsVertical());
+    const bool bTopToBottom(pOutlinerParaObject->IsTopToBottom());
+    const Size aAnchorTextSize(Size(nAnchorTextWidth, nAnchorTextHeight));
+
+    if(rSdrAutofitTextPrimitive.getWordWrap() || IsTextFrame())
+    {
+        rOutliner.SetMaxAutoPaperSize(aAnchorTextSize);
+    }
+
+    if(SDRTEXTHORZADJUST_BLOCK == eHAdj && !bVerticalWriting)
+    {
+        rOutliner.SetMinAutoPaperSize(Size(nAnchorTextWidth, 0));
+    }
+
+    if(SDRTEXTVERTADJUST_BLOCK == eVAdj && bVerticalWriting)
+    {
+        rOutliner.SetMinAutoPaperSize(Size(0, nAnchorTextHeight));
+    }
+
+    rOutliner.SetPaperSize(aNullSize);
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetText(*pOutlinerParaObject);
+    ImpAutoFitText(rOutliner,aAnchorTextSize,bVerticalWriting);
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+
+    // now get back the layouted text size from outliner
+    const Size aOutlinerTextSize(rOutliner.GetPaperSize());
+    const basegfx::B2DVector aOutlinerScale(aOutlinerTextSize.Width(), aOutlinerTextSize.Height());
+    basegfx::B2DVector aAdjustTranslate(0.0, 0.0);
+
+    // correct horizontal translation using the now known text size
+    if(SDRTEXTHORZADJUST_CENTER == eHAdj || SDRTEXTHORZADJUST_RIGHT == eHAdj)
+    {
+        const double fFree(aAnchorTextRange.getWidth() - aOutlinerScale.getX());
+
+        if(SDRTEXTHORZADJUST_CENTER == eHAdj)
+        {
+            aAdjustTranslate.setX(fFree / 2.0);
+        }
+
+        if(SDRTEXTHORZADJUST_RIGHT == eHAdj)
+        {
+            aAdjustTranslate.setX(fFree);
+        }
+    }
+
+    // correct vertical translation using the now known text size
+    if(SDRTEXTVERTADJUST_CENTER == eVAdj || SDRTEXTVERTADJUST_BOTTOM == eVAdj)
+    {
+        const double fFree(aAnchorTextRange.getHeight() - aOutlinerScale.getY());
+
+        if(SDRTEXTVERTADJUST_CENTER == eVAdj)
+        {
+            aAdjustTranslate.setY(fFree / 2.0);
+        }
+
+        if(SDRTEXTVERTADJUST_BOTTOM == eVAdj)
+        {
+            aAdjustTranslate.setY(fFree);
+        }
+    }
+
+    // prepare matrices to apply to newly created primitives. aNewTransformA
+    // will get coordinates in aOutlinerScale size and positive in X, Y.
+    basegfx::B2DHomMatrix aNewTransformA;
+    basegfx::B2DHomMatrix aNewTransformB;
+
+    // translate relative to given primitive to get same rotation and shear
+    // as the master shape we are working on. For vertical, use the top-right
+    // corner
+    const double fStartInX(bVerticalWriting && bTopToBottom ? aAdjustTranslate.getX() + aOutlinerScale.getX() : aAdjustTranslate.getX());
+    const double fStartInY(bVerticalWriting && !bTopToBottom ? aAdjustTranslate.getY() + aOutlinerScale.getY() : aAdjustTranslate.getY());
+    aNewTransformA.translate(fStartInX, fStartInY);
+
+    // mirroring. We are now in aAnchorTextRange sizes. When mirroring in X and Y,
+    // move the null point which was top left to bottom right.
+    const bool bMirrorX(basegfx::fTools::less(aScale.getX(), 0.0));
+    const bool bMirrorY(basegfx::fTools::less(aScale.getY(), 0.0));
+    aNewTransformB.scale(bMirrorX ? -1.0 : 1.0, bMirrorY ? -1.0 : 1.0);
+
+    // in-between the translations of the single primitives will take place. Afterwards,
+    // the object's transformations need to be applied
+    aNewTransformB.shearX(fShearX);
+    aNewTransformB.rotate(fRotate);
+    aNewTransformB.translate(aTranslate.getX(), aTranslate.getY());
+
+    basegfx::B2DRange aClipRange;
+
+    // now break up text primitives.
+    impTextBreakupHandler aConverter(rOutliner);
+    aConverter.decomposeBlockTextPrimitive(aNewTransformA, aNewTransformB, aClipRange);
+
+    // cleanup outliner
+    rOutliner.Clear();
+    rOutliner.setVisualizedPage(nullptr);
+    rOutliner.SetControlWord(nOriginalControlWord);
+
+    rTarget = aConverter.getPrimitive2DSequence();
+}
+
+// Resolves: fdo#35779 set background color of this shape as the editeng background if there
+// is one. Check the shape itself, then the host page, then that page's master page.
+void SdrObject::setSuitableOutlinerBg(::Outliner& rOutliner) const
+{
+    const SfxItemSet* pBackgroundFillSet = &GetObjectItemSet();
+
+    if (drawing::FillStyle_NONE == pBackgroundFillSet->Get(XATTR_FILLSTYLE).GetValue())
+    {
+        SdrPage* pOwnerPage(getSdrPageFromSdrObject());
+        if (pOwnerPage)
+        {
+            pBackgroundFillSet = &pOwnerPage->getSdrPageProperties().GetItemSet();
+
+            if (drawing::FillStyle_NONE == pBackgroundFillSet->Get(XATTR_FILLSTYLE).GetValue())
+            {
+                if (!pOwnerPage->IsMasterPage() && pOwnerPage->TRG_HasMasterPage())
+                {
+                    pBackgroundFillSet = &pOwnerPage->TRG_GetMasterPage().getSdrPageProperties().GetItemSet();
+                }
+            }
+        }
+    }
+
+    if (drawing::FillStyle_NONE != pBackgroundFillSet->Get(XATTR_FILLSTYLE).GetValue())
+    {
+        Color aColor(rOutliner.GetBackgroundColor());
+        GetDraftFillColor(*pBackgroundFillSet, aColor);
+        rOutliner.SetBackgroundColor(aColor);
+    }
+}
+
+void SdrTextObj::impDecomposeBlockTextPrimitive(
+    drawinglayer::primitive2d::Primitive2DContainer& rTarget,
+    const drawinglayer::primitive2d::SdrBlockTextPrimitive2D& rSdrBlockTextPrimitive,
+    const drawinglayer::geometry::ViewInformation2D& aViewInformation) const
+{
+    // decompose matrix to have position and size of text
+    basegfx::B2DVector aScale, aTranslate;
+    double fRotate, fShearX;
+    rSdrBlockTextPrimitive.getTextRangeTransform().decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // use B2DRange aAnchorTextRange for calculations
+    basegfx::B2DRange aAnchorTextRange(aTranslate);
+    aAnchorTextRange.expand(aTranslate + aScale);
+
+    // prepare outliner
+    const bool bIsCell(rSdrBlockTextPrimitive.getCellText());
+    SolarMutexGuard aSolarGuard;
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+    SdrTextHorzAdjust eHAdj = rSdrBlockTextPrimitive.getSdrTextHorzAdjust();
+    SdrTextVertAdjust eVAdj = rSdrBlockTextPrimitive.getSdrTextVertAdjust();
+    const EEControlBits nOriginalControlWord(rOutliner.GetControlWord());
+    const Size aNullSize;
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+    rOutliner.SetFixedCellHeight(rSdrBlockTextPrimitive.isFixedCellHeight());
+    rOutliner.SetControlWord(nOriginalControlWord|EEControlBits::AUTOPAGESIZE);
+    rOutliner.SetMinAutoPaperSize(aNullSize);
+    rOutliner.SetMaxAutoPaperSize(Size(1000000,1000000));
+
+    // That color needs to be restored on leaving this method
+    Color aOriginalBackColor(rOutliner.GetBackgroundColor());
+    setSuitableOutlinerBg(rOutliner);
+
+    // add one to rage sizes to get back to the old Rectangle and outliner measurements
+    const sal_uInt32 nAnchorTextWidth(FRound(aAnchorTextRange.getWidth() + 1));
+    const sal_uInt32 nAnchorTextHeight(FRound(aAnchorTextRange.getHeight() + 1));
+    const bool bVerticalWriting(rSdrBlockTextPrimitive.getOutlinerParaObject().IsVertical());
+    const bool bTopToBottom(rSdrBlockTextPrimitive.getOutlinerParaObject().IsTopToBottom());
+    const Size aAnchorTextSize(Size(nAnchorTextWidth, nAnchorTextHeight));
+
+    if(bIsCell)
+    {
+        // cell text is formatted neither like a text object nor like an object
+        // text, so use a special setup here
+        rOutliner.SetMaxAutoPaperSize(aAnchorTextSize);
+
+        // #i106214# To work with an unchangeable PaperSize (CellSize in
+        // this case) Set(Min|Max)AutoPaperSize and SetPaperSize have to be used.
+        // #i106214# This was not completely correct; to still measure the real
+        // text height to allow vertical adjust (and vice versa for VerticalWritintg)
+        // only one aspect has to be set, but the other one to zero
+        if(bVerticalWriting)
+        {
+            // measure the horizontal text size
+            rOutliner.SetMinAutoPaperSize(Size(0, aAnchorTextSize.Height()));
+        }
+        else
+        {
+            // measure the vertical text size
+            rOutliner.SetMinAutoPaperSize(Size(aAnchorTextSize.Width(), 0));
+        }
+
+        rOutliner.SetPaperSize(aAnchorTextSize);
+        rOutliner.SetUpdateMode(true);
+        rOutliner.SetText(rSdrBlockTextPrimitive.getOutlinerParaObject());
+    }
+    else
+    {
+        // check if block text is used (only one of them can be true)
+        const bool bHorizontalIsBlock(SDRTEXTHORZADJUST_BLOCK == eHAdj && !bVerticalWriting);
+        const bool bVerticalIsBlock(SDRTEXTVERTADJUST_BLOCK == eVAdj && bVerticalWriting);
+
+        // set minimal paper size horizontally/vertically if needed
+        if(bHorizontalIsBlock)
+        {
+            rOutliner.SetMinAutoPaperSize(Size(nAnchorTextWidth, 0));
+        }
+        else if(bVerticalIsBlock)
+        {
+            rOutliner.SetMinAutoPaperSize(Size(0, nAnchorTextHeight));
+        }
+
+        if((rSdrBlockTextPrimitive.getWordWrap() || IsTextFrame()) && !rSdrBlockTextPrimitive.getUnlimitedPage())
+        {
+            // #i103454# maximal paper size hor/ver needs to be limited to text
+            // frame size. If it's block text, still allow the 'other' direction
+            // to grow to get a correct real text size when using GetPaperSize().
+            // When just using aAnchorTextSize as maximum, GetPaperSize()
+            // would just return aAnchorTextSize again: this means, the wanted
+            // 'measurement' of the real size of block text would not work
+            Size aMaxAutoPaperSize(aAnchorTextSize);
+
+            // Usual processing - always grow in one of directions
+            bool bAllowGrowVertical = !bVerticalWriting;
+            bool bAllowGrowHorizontal = bVerticalWriting;
+
+            // Compatibility mode for tdf#99729
+            if (getSdrModelFromSdrObject().IsAnchoredTextOverflowLegacy())
+            {
+                bAllowGrowVertical = bHorizontalIsBlock;
+                bAllowGrowHorizontal = bVerticalIsBlock;
+            }
+
+            if (bAllowGrowVertical)
+            {
+                // allow to grow vertical for horizontal texts
+                aMaxAutoPaperSize.setHeight(1000000);
+            }
+            else if (bAllowGrowHorizontal)
+            {
+                // allow to grow horizontal for vertical texts
+                aMaxAutoPaperSize.setWidth(1000000);
+            }
+
+            rOutliner.SetMaxAutoPaperSize(aMaxAutoPaperSize);
+        }
+
+        rOutliner.SetPaperSize(aNullSize);
+        rOutliner.SetUpdateMode(true);
+        rOutliner.SetText(rSdrBlockTextPrimitive.getOutlinerParaObject());
+    }
+
+    rOutliner.SetControlWord(nOriginalControlWord);
+
+    // now get back the layouted text size from outliner
+    const Size aOutlinerTextSize(rOutliner.GetPaperSize());
+    const basegfx::B2DVector aOutlinerScale(aOutlinerTextSize.Width(), aOutlinerTextSize.Height());
+    basegfx::B2DVector aAdjustTranslate(0.0, 0.0);
+
+    // For draw objects containing text correct hor/ver alignment if text is bigger
+    // than the object itself. Without that correction, the text would always be
+    // formatted to the left edge (or top edge when vertical) of the draw object.
+    if(!IsTextFrame() && !bIsCell)
+    {
+        if(aAnchorTextRange.getWidth() < aOutlinerScale.getX() && !bVerticalWriting)
+        {
+            // Horizontal case here. Correct only if eHAdj == SDRTEXTHORZADJUST_BLOCK,
+            // else the alignment is wanted.
+            if(SDRTEXTHORZADJUST_BLOCK == eHAdj)
+            {
+                SvxAdjust eAdjust = GetObjectItemSet().Get(EE_PARA_JUST).GetAdjust();
+                switch(eAdjust)
+                {
+                    case SvxAdjust::Left:   eHAdj = SDRTEXTHORZADJUST_LEFT; break;
+                    case SvxAdjust::Right:  eHAdj = SDRTEXTHORZADJUST_RIGHT; break;
+                    case SvxAdjust::Center: eHAdj = SDRTEXTHORZADJUST_CENTER; break;
+                    default: break;
+                }
+            }
+        }
+
+        if(aAnchorTextRange.getHeight() < aOutlinerScale.getY() && bVerticalWriting)
+        {
+            // Vertical case here. Correct only if eHAdj == SDRTEXTVERTADJUST_BLOCK,
+            // else the alignment is wanted.
+            if(SDRTEXTVERTADJUST_BLOCK == eVAdj)
+            {
+                eVAdj = SDRTEXTVERTADJUST_CENTER;
+            }
+        }
+    }
+
+    // correct horizontal translation using the now known text size
+    if(SDRTEXTHORZADJUST_CENTER == eHAdj || SDRTEXTHORZADJUST_RIGHT == eHAdj)
+    {
+        const double fFree(aAnchorTextRange.getWidth() - aOutlinerScale.getX());
+
+        if(SDRTEXTHORZADJUST_CENTER == eHAdj)
+        {
+            aAdjustTranslate.setX(fFree / 2.0);
+        }
+
+        if(SDRTEXTHORZADJUST_RIGHT == eHAdj)
+        {
+            aAdjustTranslate.setX(fFree);
+        }
+    }
+
+    // correct vertical translation using the now known text size
+    if(SDRTEXTVERTADJUST_CENTER == eVAdj || SDRTEXTVERTADJUST_BOTTOM == eVAdj)
+    {
+        const double fFree(aAnchorTextRange.getHeight() - aOutlinerScale.getY());
+
+        if(SDRTEXTVERTADJUST_CENTER == eVAdj)
+        {
+            aAdjustTranslate.setY(fFree / 2.0);
+        }
+
+        if(SDRTEXTVERTADJUST_BOTTOM == eVAdj)
+        {
+            aAdjustTranslate.setY(fFree);
+        }
+    }
+
+    // prepare matrices to apply to newly created primitives. aNewTransformA
+    // will get coordinates in aOutlinerScale size and positive in X, Y.
+    // Translate relative to given primitive to get same rotation and shear
+    // as the master shape we are working on. For vertical, use the top-right
+    // corner
+    const double fStartInX(bVerticalWriting && bTopToBottom ? aAdjustTranslate.getX() + aOutlinerScale.getX() : aAdjustTranslate.getX());
+    const double fStartInY(bVerticalWriting && !bTopToBottom ? aAdjustTranslate.getY() + aOutlinerScale.getY() : aAdjustTranslate.getY());
+    const basegfx::B2DTuple aAdjOffset(fStartInX, fStartInY);
+    basegfx::B2DHomMatrix aNewTransformA(basegfx::utils::createTranslateB2DHomMatrix(aAdjOffset.getX(), aAdjOffset.getY()));
+
+    // Apply the camera rotation. It have to be applied after adjustment of
+    // the text (top, bottom, center, left, right).
+    if(GetCameraZRotation() != 0)
+    {
+        // First find the text rect.
+        basegfx::B2DRange aTextRectangle(/*x1=*/aTranslate.getX() + aAdjustTranslate.getX(),
+                                         /*y1=*/aTranslate.getY() + aAdjustTranslate.getY(),
+                                         /*x2=*/aTranslate.getX() + aOutlinerScale.getX() - aAdjustTranslate.getX(),
+                                         /*y2=*/aTranslate.getY() + aOutlinerScale.getY() - aAdjustTranslate.getY());
+
+        // Rotate the text from the center point.
+        basegfx::B2DVector aTranslateToCenter(aTextRectangle.getWidth() / 2, aTextRectangle.getHeight() / 2);
+        aNewTransformA.translate(-aTranslateToCenter.getX(), -aTranslateToCenter.getY());
+        aNewTransformA.rotate(basegfx::deg2rad(360.0 - GetCameraZRotation() ));
+        aNewTransformA.translate(aTranslateToCenter.getX(), aTranslateToCenter.getY());
+    }
+
+    // mirroring. We are now in aAnchorTextRange sizes. When mirroring in X and Y,
+    // move the null point which was top left to bottom right.
+    const bool bMirrorX(basegfx::fTools::less(aScale.getX(), 0.0));
+    const bool bMirrorY(basegfx::fTools::less(aScale.getY(), 0.0));
+
+    // in-between the translations of the single primitives will take place. Afterwards,
+    // the object's transformations need to be applied
+    const basegfx::B2DHomMatrix aNewTransformB(basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+        bMirrorX ? -1.0 : 1.0, bMirrorY ? -1.0 : 1.0,
+        fShearX, fRotate, aTranslate.getX(), aTranslate.getY()));
+
+
+    // create ClipRange (if needed)
+    basegfx::B2DRange aClipRange;
+
+    // now break up text primitives.
+    impTextBreakupHandler aConverter(rOutliner);
+    aConverter.decomposeBlockTextPrimitive(aNewTransformA, aNewTransformB, aClipRange);
+
+    // cleanup outliner
+    rOutliner.SetBackgroundColor(aOriginalBackColor);
+    rOutliner.Clear();
+    rOutliner.setVisualizedPage(nullptr);
+
+    rTarget = aConverter.getPrimitive2DSequence();
+}
+
+void SdrTextObj::impDecomposeStretchTextPrimitive(
+    drawinglayer::primitive2d::Primitive2DContainer& rTarget,
+    const drawinglayer::primitive2d::SdrStretchTextPrimitive2D& rSdrStretchTextPrimitive,
+    const drawinglayer::geometry::ViewInformation2D& aViewInformation) const
+{
+    // decompose matrix to have position and size of text
+    basegfx::B2DVector aScale, aTranslate;
+    double fRotate, fShearX;
+    rSdrStretchTextPrimitive.getTextRangeTransform().decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // prepare outliner
+    SolarMutexGuard aSolarGuard;
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+    const EEControlBits nOriginalControlWord(rOutliner.GetControlWord());
+    const Size aNullSize;
+
+    rOutliner.SetControlWord(nOriginalControlWord|EEControlBits::STRETCHING|EEControlBits::AUTOPAGESIZE);
+    rOutliner.SetFixedCellHeight(rSdrStretchTextPrimitive.isFixedCellHeight());
+    rOutliner.SetMinAutoPaperSize(aNullSize);
+    rOutliner.SetMaxAutoPaperSize(Size(1000000,1000000));
+    rOutliner.SetPaperSize(aNullSize);
+    rOutliner.SetUpdateMode(true);
+    rOutliner.SetText(rSdrStretchTextPrimitive.getOutlinerParaObject());
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+
+    // now get back the laid out text size from outliner
+    const Size aOutlinerTextSize(rOutliner.CalcTextSize());
+    const basegfx::B2DVector aOutlinerScale(
+        basegfx::fTools::equalZero(aOutlinerTextSize.Width()) ? 1.0 : aOutlinerTextSize.Width(),
+        basegfx::fTools::equalZero(aOutlinerTextSize.Height()) ? 1.0 : aOutlinerTextSize.Height());
+
+    // prepare matrices to apply to newly created primitives
+    basegfx::B2DHomMatrix aNewTransformA;
+
+    // #i101957# Check for vertical text. If used, aNewTransformA
+    // needs to translate the text initially around object width to orient
+    // it relative to the topper right instead of the topper left
+    const bool bVertical(rSdrStretchTextPrimitive.getOutlinerParaObject().IsVertical());
+    const bool bTopToBottom(rSdrStretchTextPrimitive.getOutlinerParaObject().IsTopToBottom());
+
+    if(bVertical)
+    {
+        if(bTopToBottom)
+            aNewTransformA.translate(aScale.getX(), 0.0);
+        else
+            aNewTransformA.translate(0.0, aScale.getY());
+    }
+
+    // calculate global char stretching scale parameters. Use non-mirrored sizes
+    // to layout without mirroring
+    const double fScaleX(fabs(aScale.getX()) / aOutlinerScale.getX());
+    const double fScaleY(fabs(aScale.getY()) / aOutlinerScale.getY());
+    rOutliner.SetGlobalCharStretching(static_cast<sal_Int16>(FRound(fScaleX * 100.0)), static_cast<sal_Int16>(FRound(fScaleY * 100.0)));
+
+    // When mirroring in X and Y,
+    // move the null point which was top left to bottom right.
+    const bool bMirrorX(basegfx::fTools::less(aScale.getX(), 0.0));
+    const bool bMirrorY(basegfx::fTools::less(aScale.getY(), 0.0));
+
+    // in-between the translations of the single primitives will take place. Afterwards,
+    // the object's transformations need to be applied
+    const basegfx::B2DHomMatrix aNewTransformB(basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+        bMirrorX ? -1.0 : 1.0, bMirrorY ? -1.0 : 1.0,
+        fShearX, fRotate, aTranslate.getX(), aTranslate.getY()));
+
+    // now break up text primitives.
+    impTextBreakupHandler aConverter(rOutliner);
+    aConverter.decomposeStretchTextPrimitive(aNewTransformA, aNewTransformB);
+
+    // cleanup outliner
+    rOutliner.SetControlWord(nOriginalControlWord);
+    rOutliner.Clear();
+    rOutliner.setVisualizedPage(nullptr);
+
+    rTarget = aConverter.getPrimitive2DSequence();
+}
+
+
+// timing generators
+#define ENDLESS_LOOP    (0xffffffff)
+#define ENDLESS_TIME    (double(0xffffffff))
+#define PIXEL_DPI       (96.0)
+
+void SdrTextObj::impGetBlinkTextTiming(drawinglayer::animation::AnimationEntryList& rAnimList) const
+{
+    if(SdrTextAniKind::Blink != GetTextAniKind())
+        return;
+
+    // get values
+    const SfxItemSet& rSet = GetObjectItemSet();
+    const sal_uInt32 nRepeat(static_cast<sal_uInt32>(rSet.Get(SDRATTR_TEXT_ANICOUNT).GetValue()));
+    double fDelay(static_cast<double>(rSet.Get(SDRATTR_TEXT_ANIDELAY).GetValue()));
+
+    if(0.0 == fDelay)
+    {
+        // use default
+        fDelay = 250.0;
+    }
+
+    // prepare loop and add
+    drawinglayer::animation::AnimationEntryLoop  aLoop(nRepeat ? nRepeat : ENDLESS_LOOP);
+    drawinglayer::animation::AnimationEntryFixed aStart(fDelay, 0.0);
+    aLoop.append(aStart);
+    drawinglayer::animation::AnimationEntryFixed aEnd(fDelay, 1.0);
+    aLoop.append(aEnd);
+    rAnimList.append(aLoop);
+
+    // add stopped state if loop is not endless
+    if(0 != nRepeat)
+    {
+        bool bVisibleWhenStopped(rSet.Get(SDRATTR_TEXT_ANISTOPINSIDE).GetValue());
+        drawinglayer::animation::AnimationEntryFixed aStop(ENDLESS_TIME, bVisibleWhenStopped ? 0.0 : 1.0);
+        rAnimList.append(aStop);
+    }
+}
+
+static void impCreateScrollTiming(const SfxItemSet& rSet, drawinglayer::animation::AnimationEntryList& rAnimList, bool bForward, double fTimeFullPath, double fFrequency)
+{
+    bool bVisibleWhenStopped(rSet.Get(SDRATTR_TEXT_ANISTOPINSIDE).GetValue());
+    bool bVisibleWhenStarted(rSet.Get(SDRATTR_TEXT_ANISTARTINSIDE).GetValue());
+    const sal_uInt32 nRepeat(rSet.Get(SDRATTR_TEXT_ANICOUNT).GetValue());
+
+    if(bVisibleWhenStarted)
+    {
+        // move from center to outside
+        drawinglayer::animation::AnimationEntryLinear aInOut(fTimeFullPath * 0.5, fFrequency, 0.5, bForward ? 1.0 : 0.0);
+        rAnimList.append(aInOut);
+    }
+
+    // loop. In loop, move through
+    drawinglayer::animation::AnimationEntryLoop aLoop(nRepeat ? nRepeat : ENDLESS_LOOP);
+    drawinglayer::animation::AnimationEntryLinear aThrough(fTimeFullPath, fFrequency, bForward ? 0.0 : 1.0, bForward ? 1.0 : 0.0);
+    aLoop.append(aThrough);
+    rAnimList.append(aLoop);
+
+    if(0 != nRepeat && bVisibleWhenStopped)
+    {
+        // move from outside to center
+        drawinglayer::animation::AnimationEntryLinear aOutIn(fTimeFullPath * 0.5, fFrequency, bForward ? 0.0 : 1.0, 0.5);
+        rAnimList.append(aOutIn);
+
+        // add timing for staying at the end
+        drawinglayer::animation::AnimationEntryFixed aEnd(ENDLESS_TIME, 0.5);
+        rAnimList.append(aEnd);
+    }
+}
+
+static void impCreateAlternateTiming(const SfxItemSet& rSet, drawinglayer::animation::AnimationEntryList& rAnimList, double fRelativeTextLength, bool bForward, double fTimeFullPath, double fFrequency)
+{
+    if(basegfx::fTools::more(fRelativeTextLength, 0.5))
+    {
+        // this is the case when fTextLength > fFrameLength, text is bigger than animation frame.
+        // In that case, correct direction
+        bForward = !bForward;
+    }
+
+    const double fStartPosition(bForward ? fRelativeTextLength : 1.0 - fRelativeTextLength);
+    const double fEndPosition(bForward ? 1.0 - fRelativeTextLength : fRelativeTextLength);
+    bool bVisibleWhenStarted(rSet.Get(SDRATTR_TEXT_ANISTARTINSIDE).GetValue());
+    const sal_uInt32 nRepeat(rSet.Get(SDRATTR_TEXT_ANICOUNT).GetValue());
+
+    if(!bVisibleWhenStarted)
+    {
+        // move from outside to center
+        drawinglayer::animation::AnimationEntryLinear aOutIn(fTimeFullPath * 0.5, fFrequency, bForward ? 0.0 : 1.0, 0.5);
+        rAnimList.append(aOutIn);
+    }
+
+    // loop. In loop, move out and in again. fInnerMovePath may be negative when text is bigger then frame,
+    // so use absolute value
+    const double fInnerMovePath(fabs(1.0 - (fRelativeTextLength * 2.0)));
+    const double fTimeForInnerPath(fTimeFullPath * fInnerMovePath);
+    const double fHalfInnerPath(fTimeForInnerPath * 0.5);
+    const sal_uInt32 nDoubleRepeat(nRepeat / 2L);
+
+    if(nDoubleRepeat || 0 == nRepeat)
+    {
+        // double forth and back loop
+        drawinglayer::animation::AnimationEntryLoop aLoop(nDoubleRepeat ? nDoubleRepeat : ENDLESS_LOOP);
+        drawinglayer::animation::AnimationEntryLinear aTime0(fHalfInnerPath, fFrequency, 0.5, fEndPosition);
+        aLoop.append(aTime0);
+        drawinglayer::animation::AnimationEntryLinear aTime1(fTimeForInnerPath, fFrequency, fEndPosition, fStartPosition);
+        aLoop.append(aTime1);
+        drawinglayer::animation::AnimationEntryLinear aTime2(fHalfInnerPath, fFrequency, fStartPosition, 0.5);
+        aLoop.append(aTime2);
+        rAnimList.append(aLoop);
+    }
+
+    if(nRepeat % 2L)
+    {
+        // repeat is uneven, so we need one more forth and back to center
+        drawinglayer::animation::AnimationEntryLinear aTime0(fHalfInnerPath, fFrequency, 0.5, fEndPosition);
+        rAnimList.append(aTime0);
+        drawinglayer::animation::AnimationEntryLinear aTime1(fHalfInnerPath, fFrequency, fEndPosition, 0.5);
+        rAnimList.append(aTime1);
+    }
+
+    if(0 != nRepeat)
+    {
+        bool bVisibleWhenStopped(rSet.Get(SDRATTR_TEXT_ANISTOPINSIDE).GetValue());
+        if(bVisibleWhenStopped)
+        {
+            // add timing for staying at the end
+            drawinglayer::animation::AnimationEntryFixed aEnd(ENDLESS_TIME, 0.5);
+            rAnimList.append(aEnd);
+        }
+        else
+        {
+            // move from center to outside
+            drawinglayer::animation::AnimationEntryLinear aInOut(fTimeFullPath * 0.5, fFrequency, 0.5, bForward ? 1.0 : 0.0);
+            rAnimList.append(aInOut);
+        }
+    }
+}
+
+static void impCreateSlideTiming(const SfxItemSet& rSet, drawinglayer::animation::AnimationEntryList& rAnimList, bool bForward, double fTimeFullPath, double fFrequency)
+{
+    // move in from outside, start outside
+    const double fStartPosition(bForward ? 0.0 : 1.0);
+    const sal_uInt32 nRepeat(rSet.Get(SDRATTR_TEXT_ANICOUNT).GetValue());
+
+    // move from outside to center
+    drawinglayer::animation::AnimationEntryLinear aOutIn(fTimeFullPath * 0.5, fFrequency, fStartPosition, 0.5);
+    rAnimList.append(aOutIn);
+
+    // loop. In loop, move out and in again
+    if(nRepeat > 1 || 0 == nRepeat)
+    {
+        drawinglayer::animation::AnimationEntryLoop aLoop(nRepeat ? nRepeat - 1 : ENDLESS_LOOP);
+        drawinglayer::animation::AnimationEntryLinear aTime0(fTimeFullPath * 0.5, fFrequency, 0.5, fStartPosition);
+        aLoop.append(aTime0);
+        drawinglayer::animation::AnimationEntryLinear aTime1(fTimeFullPath * 0.5, fFrequency, fStartPosition, 0.5);
+        aLoop.append(aTime1);
+        rAnimList.append(aLoop);
+    }
+
+    // always visible when stopped, so add timing for staying at the end when not endless
+    if(0 != nRepeat)
+    {
+        drawinglayer::animation::AnimationEntryFixed aEnd(ENDLESS_TIME, 0.5);
+        rAnimList.append(aEnd);
+    }
+}
+
+void SdrTextObj::impGetScrollTextTiming(drawinglayer::animation::AnimationEntryList& rAnimList, double fFrameLength, double fTextLength) const
+{
+    const SdrTextAniKind eAniKind(GetTextAniKind());
+
+    if(SdrTextAniKind::Scroll != eAniKind && SdrTextAniKind::Alternate != eAniKind && SdrTextAniKind::Slide != eAniKind)
+        return;
+
+    // get data. Goal is to calculate fTimeFullPath which is the time needed to
+    // move animation from (0.0) to (1.0) state
+    const SfxItemSet& rSet = GetObjectItemSet();
+    double fAnimationDelay(static_cast<double>(rSet.Get(SDRATTR_TEXT_ANIDELAY).GetValue()));
+    double fSingleStepWidth(static_cast<double>(rSet.Get(SDRATTR_TEXT_ANIAMOUNT).GetValue()));
+    const SdrTextAniDirection eDirection(GetTextAniDirection());
+    const bool bForward(SdrTextAniDirection::Right == eDirection || SdrTextAniDirection::Down == eDirection);
+
+    if(basegfx::fTools::equalZero(fAnimationDelay))
+    {
+        // default to 1/20 second
+        fAnimationDelay = 50.0;
+    }
+
+    if(basegfx::fTools::less(fSingleStepWidth, 0.0))
+    {
+        // data is in pixels, convert to logic. Imply PIXEL_DPI dpi.
+        // It makes no sense to keep the view-transformation centered
+        // definitions, so get rid of them here.
+        fSingleStepWidth = (-fSingleStepWidth * (2540.0 / PIXEL_DPI));
+    }
+
+    if(basegfx::fTools::equalZero(fSingleStepWidth))
+    {
+        // default to 1 millimeter
+        fSingleStepWidth = 100.0;
+    }
+
+    // use the length of the full animation path and the number of steps
+    // to get the full path time
+    const double fFullPathLength(fFrameLength + fTextLength);
+    const double fNumberOfSteps(fFullPathLength / fSingleStepWidth);
+    double fTimeFullPath(fNumberOfSteps * fAnimationDelay);
+
+    if(fTimeFullPath < fAnimationDelay)
+    {
+        fTimeFullPath = fAnimationDelay;
+    }
+
+    switch(eAniKind)
+    {
+        case SdrTextAniKind::Scroll :
+        {
+            impCreateScrollTiming(rSet, rAnimList, bForward, fTimeFullPath, fAnimationDelay);
+            break;
+        }
+        case SdrTextAniKind::Alternate :
+        {
+            double fRelativeTextLength(fTextLength / (fFrameLength + fTextLength));
+            impCreateAlternateTiming(rSet, rAnimList, fRelativeTextLength, bForward, fTimeFullPath, fAnimationDelay);
+            break;
+        }
+        case SdrTextAniKind::Slide :
+        {
+            impCreateSlideTiming(rSet, rAnimList, bForward, fTimeFullPath, fAnimationDelay);
+            break;
+        }
+        default : break; // SdrTextAniKind::NONE, SdrTextAniKind::Blink
+    }
+}
+
+void SdrTextObj::impHandleChainingEventsDuringDecomposition(SdrOutliner &rOutliner) const
+{
+    if (GetTextChain()->GetNilChainingEvent(this))
+        return;
+
+    GetTextChain()->SetNilChainingEvent(this, true);
+
+    TextChainFlow aTxtChainFlow(const_cast<SdrTextObj*>(this));
+    bool bIsOverflow;
+
+#ifdef DBG_UTIL
+    // Some debug output
+    size_t nObjCount(getSdrPageFromSdrObject()->GetObjCount());
+    for (size_t i = 0; i < nObjCount; i++)
+    {
+        SdrTextObj* pCurObj(dynamic_cast< SdrTextObj* >(getSdrPageFromSdrObject()->GetObj(i)));
+        if(pCurObj == this)
+        {
+            SAL_INFO("svx.chaining", "Working on TextBox " << i);
+            break;
+        }
+    }
+#endif
+
+    aTxtChainFlow.CheckForFlowEvents(&rOutliner);
+
+    if (aTxtChainFlow.IsUnderflow() && !IsInEditMode())
+    {
+        // underflow-induced overflow
+        aTxtChainFlow.ExecuteUnderflow(&rOutliner);
+        bIsOverflow = aTxtChainFlow.IsOverflow();
+    } else {
+        // standard overflow (no underflow before)
+        bIsOverflow = aTxtChainFlow.IsOverflow();
+    }
+
+    if (bIsOverflow && !IsInEditMode()) {
+        // Initialize Chaining Outliner
+        SdrOutliner &rChainingOutl(getSdrModelFromSdrObject().GetChainingOutliner(this));
+        ImpInitDrawOutliner( rChainingOutl );
+        rChainingOutl.SetUpdateMode(true);
+        // We must pass the chaining outliner otherwise we would mess up decomposition
+        aTxtChainFlow.ExecuteOverflow(&rOutliner, &rChainingOutl);
+    }
+
+    GetTextChain()->SetNilChainingEvent(this, false);
+}
+
+void SdrTextObj::impDecomposeChainedTextPrimitive(
+        drawinglayer::primitive2d::Primitive2DContainer& rTarget,
+        const drawinglayer::primitive2d::SdrChainedTextPrimitive2D& rSdrChainedTextPrimitive,
+        const drawinglayer::geometry::ViewInformation2D& aViewInformation) const
+{
+    // decompose matrix to have position and size of text
+    basegfx::B2DVector aScale, aTranslate;
+    double fRotate, fShearX;
+    rSdrChainedTextPrimitive.getTextRangeTransform().decompose(aScale, aTranslate, fRotate, fShearX);
+
+    // use B2DRange aAnchorTextRange for calculations
+    basegfx::B2DRange aAnchorTextRange(aTranslate);
+    aAnchorTextRange.expand(aTranslate + aScale);
+
+    // prepare outliner
+    const SfxItemSet& rTextItemSet = rSdrChainedTextPrimitive.getSdrText()->GetItemSet();
+    SolarMutexGuard aSolarGuard;
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+
+    SdrTextVertAdjust eVAdj = GetTextVerticalAdjust(rTextItemSet);
+    SdrTextHorzAdjust eHAdj = GetTextHorizontalAdjust(rTextItemSet);
+    const EEControlBits nOriginalControlWord(rOutliner.GetControlWord());
+    const Size aNullSize;
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+
+    rOutliner.SetControlWord(nOriginalControlWord|EEControlBits::AUTOPAGESIZE|EEControlBits::STRETCHING);
+    rOutliner.SetMinAutoPaperSize(aNullSize);
+    rOutliner.SetMaxAutoPaperSize(Size(1000000,1000000));
+
+    // add one to rage sizes to get back to the old Rectangle and outliner measurements
+    const sal_uInt32 nAnchorTextWidth(FRound(aAnchorTextRange.getWidth() + 1));
+    const sal_uInt32 nAnchorTextHeight(FRound(aAnchorTextRange.getHeight() + 1));
+
+    // Text
+    const OutlinerParaObject* pOutlinerParaObject = rSdrChainedTextPrimitive.getSdrText()->GetOutlinerParaObject();
+    OSL_ENSURE(pOutlinerParaObject, "impDecomposeBlockTextPrimitive used with no OutlinerParaObject (!)");
+
+    const bool bVerticalWriting(pOutlinerParaObject->IsVertical());
+    const bool bTopToBottom(pOutlinerParaObject->IsTopToBottom());
+    const Size aAnchorTextSize(Size(nAnchorTextWidth, nAnchorTextHeight));
+
+    if(IsTextFrame())
+    {
+        rOutliner.SetMaxAutoPaperSize(aAnchorTextSize);
+    }
+
+    if(SDRTEXTHORZADJUST_BLOCK == eHAdj && !bVerticalWriting)
+    {
+        rOutliner.SetMinAutoPaperSize(Size(nAnchorTextWidth, 0));
+    }
+
+    if(SDRTEXTVERTADJUST_BLOCK == eVAdj && bVerticalWriting)
+    {
+        rOutliner.SetMinAutoPaperSize(Size(0, nAnchorTextHeight));
+    }
+
+    rOutliner.SetPaperSize(aNullSize);
+    rOutliner.SetUpdateMode(true);
+    // Sets original text
+    rOutliner.SetText(*pOutlinerParaObject);
+
+    /* Begin overflow/underflow handling */
+
+    impHandleChainingEventsDuringDecomposition(rOutliner);
+
+    /* End overflow/underflow handling */
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+
+    // now get back the layouted text size from outliner
+    const Size aOutlinerTextSize(rOutliner.GetPaperSize());
+    const basegfx::B2DVector aOutlinerScale(aOutlinerTextSize.Width(), aOutlinerTextSize.Height());
+    basegfx::B2DVector aAdjustTranslate(0.0, 0.0);
+
+    // correct horizontal translation using the now known text size
+    if(SDRTEXTHORZADJUST_CENTER == eHAdj || SDRTEXTHORZADJUST_RIGHT == eHAdj)
+    {
+        const double fFree(aAnchorTextRange.getWidth() - aOutlinerScale.getX());
+
+        if(SDRTEXTHORZADJUST_CENTER == eHAdj)
+        {
+            aAdjustTranslate.setX(fFree / 2.0);
+        }
+
+        if(SDRTEXTHORZADJUST_RIGHT == eHAdj)
+        {
+            aAdjustTranslate.setX(fFree);
+        }
+    }
+
+    // correct vertical translation using the now known text size
+    if(SDRTEXTVERTADJUST_CENTER == eVAdj || SDRTEXTVERTADJUST_BOTTOM == eVAdj)
+    {
+        const double fFree(aAnchorTextRange.getHeight() - aOutlinerScale.getY());
+
+        if(SDRTEXTVERTADJUST_CENTER == eVAdj)
+        {
+            aAdjustTranslate.setY(fFree / 2.0);
+        }
+
+        if(SDRTEXTVERTADJUST_BOTTOM == eVAdj)
+        {
+            aAdjustTranslate.setY(fFree);
+        }
+    }
+
+    // prepare matrices to apply to newly created primitives. aNewTransformA
+    // will get coordinates in aOutlinerScale size and positive in X, Y.
+    basegfx::B2DHomMatrix aNewTransformA;
+    basegfx::B2DHomMatrix aNewTransformB;
+
+    // translate relative to given primitive to get same rotation and shear
+    // as the master shape we are working on. For vertical, use the top-right
+    // corner
+    const double fStartInX(bVerticalWriting && bTopToBottom ? aAdjustTranslate.getX() + aOutlinerScale.getX() : aAdjustTranslate.getX());
+    const double fStartInY(bVerticalWriting && !bTopToBottom ? aAdjustTranslate.getY() + aOutlinerScale.getY() : aAdjustTranslate.getY());
+    aNewTransformA.translate(fStartInX, fStartInY);
+
+    // mirroring. We are now in aAnchorTextRange sizes. When mirroring in X and Y,
+    // move the null point which was top left to bottom right.
+    const bool bMirrorX(basegfx::fTools::less(aScale.getX(), 0.0));
+    const bool bMirrorY(basegfx::fTools::less(aScale.getY(), 0.0));
+    aNewTransformB.scale(bMirrorX ? -1.0 : 1.0, bMirrorY ? -1.0 : 1.0);
+
+    // in-between the translations of the single primitives will take place. Afterwards,
+    // the object's transformations need to be applied
+    aNewTransformB.shearX(fShearX);
+    aNewTransformB.rotate(fRotate);
+    aNewTransformB.translate(aTranslate.getX(), aTranslate.getY());
+
+    basegfx::B2DRange aClipRange;
+
+    // now break up text primitives.
+    impTextBreakupHandler aConverter(rOutliner);
+    aConverter.decomposeBlockTextPrimitive(aNewTransformA, aNewTransformB, aClipRange);
+
+    // cleanup outliner
+    rOutliner.Clear();
+    rOutliner.setVisualizedPage(nullptr);
+    rOutliner.SetControlWord(nOriginalControlWord);
+
+    rTarget = aConverter.getPrimitive2DSequence();
+}
+
+// Direct decomposer for text visualization when you already have a prepared
+// Outliner containing all the needed information
+void SdrTextObj::impDecomposeBlockTextPrimitiveDirect(
+    drawinglayer::primitive2d::Primitive2DContainer& rTarget,
+    SdrOutliner& rOutliner,
+    const basegfx::B2DHomMatrix& rNewTransformA,
+    const basegfx::B2DHomMatrix& rNewTransformB,
+    const basegfx::B2DRange& rClipRange)
+{
+    impTextBreakupHandler aConverter(rOutliner);
+    aConverter.decomposeBlockTextPrimitive(rNewTransformA, rNewTransformB, rClipRange);
+    rTarget.append(aConverter.getPrimitive2DSequence());
+}
+
+double SdrTextObj::GetCameraZRotation() const
+{
+    const css::uno::Any* pAny;
+    double fTextCameraZRotateAngle = 0.0;
+    const SfxItemSet& rSet = GetObjectItemSet();
+    const SdrCustomShapeGeometryItem& rGeometryItem(rSet.Get(SDRATTR_CUSTOMSHAPE_GEOMETRY));
+
+    pAny = rGeometryItem.GetPropertyValueByName("TextCameraZRotateAngle");
+
+    if ( pAny )
+        *pAny >>= fTextCameraZRotateAngle;
+
+    return fTextCameraZRotateAngle;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotextpathdecomposition.cxx b/svx/source/svdraw/svdotextpathdecomposition.cxx
new file mode 100644
index 000000000..a607d05c7
--- /dev/null
+++ b/svx/source/svdraw/svdotextpathdecomposition.cxx
@@ -0,0 +1,785 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <o3tl/safeint.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdoutl.hxx>
+#include <basegfx/vector/b2dvector.hxx>
+#include <sdr/primitive2d/sdrtextprimitive2d.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <algorithm>
+#include <com/sun/star/i18n/ScriptType.hpp>
+#include <com/sun/star/i18n/BreakIterator.hpp>
+#include <comphelper/processfactory.hxx>
+#include <com/sun/star/i18n/CharacterIteratorMode.hpp>
+#include <drawinglayer/primitive2d/textlayoutdevice.hxx>
+#include <drawinglayer/primitive2d/textprimitive2d.hxx>
+#include <basegfx/color/bcolor.hxx>
+
+
+// primitive decomposition helpers
+
+#include <drawinglayer/attribute/strokeattribute.hxx>
+#include <drawinglayer/primitive2d/polygonprimitive2d.hxx>
+#include <drawinglayer/primitive2d/unifiedtransparenceprimitive2d.hxx>
+#include <svx/unoapi.hxx>
+#include <drawinglayer/geometry/viewinformation2d.hxx>
+#include <sdr/attribute/sdrformtextoutlineattribute.hxx>
+
+
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::lang;
+using namespace ::com::sun::star::i18n;
+
+
+// PathTextPortion helper
+
+namespace
+{
+    class impPathTextPortion
+    {
+        basegfx::B2DVector                          maOffset;
+        OUString                                    maText;
+        sal_Int32                                   mnTextStart;
+        sal_Int32                                   mnTextLength;
+        sal_Int32                                   mnParagraph;
+        SvxFont                                     maFont;
+        ::std::vector< double >                     maDblDXArray;   // double DXArray, font size independent -> unit coordinate system
+        css::lang::Locale                           maLocale;
+
+        bool                                        mbRTL : 1;
+
+    public:
+        explicit impPathTextPortion(DrawPortionInfo& rInfo)
+        :   maOffset(rInfo.mrStartPos.X(), rInfo.mrStartPos.Y()),
+            maText(rInfo.maText),
+            mnTextStart(rInfo.mnTextStart),
+            mnTextLength(rInfo.mnTextLen),
+            mnParagraph(rInfo.mnPara),
+            maFont(rInfo.mrFont),
+            maDblDXArray(),
+            maLocale(rInfo.mpLocale ? *rInfo.mpLocale : css::lang::Locale()),
+            mbRTL(!rInfo.mrFont.IsVertical() && rInfo.IsRTL())
+        {
+            if(mnTextLength && rInfo.mpDXArray)
+            {
+                maDblDXArray.reserve(mnTextLength);
+
+                for(sal_Int32 a=0; a < mnTextLength; a++)
+                {
+                    maDblDXArray.push_back(static_cast<double>(rInfo.mpDXArray[a]));
+                }
+            }
+        }
+
+        // for ::std::sort
+        bool operator<(const impPathTextPortion& rComp) const
+        {
+            if(mnParagraph < rComp.mnParagraph)
+            {
+                return true;
+            }
+
+            if(maOffset.getX() < rComp.maOffset.getX())
+            {
+                return true;
+            }
+
+            return (maOffset.getY() < rComp.maOffset.getY());
+        }
+
+        const OUString& getText() const { return maText; }
+        sal_Int32 getTextStart() const { return mnTextStart; }
+        sal_Int32 getTextLength() const { return mnTextLength; }
+        sal_Int32 getParagraph() const { return mnParagraph; }
+        const SvxFont& getFont() const { return maFont; }
+        bool isRTL() const { return mbRTL; }
+        const ::std::vector< double >& getDoubleDXArray() const { return maDblDXArray; }
+        const css::lang::Locale& getLocale() const { return maLocale; }
+
+        sal_Int32 getPortionIndex(sal_Int32 nIndex, sal_Int32 nLength) const
+        {
+            if(mbRTL)
+            {
+                return (mnTextStart + (mnTextLength - (nIndex + nLength)));
+            }
+            else
+            {
+                return (mnTextStart + nIndex);
+            }
+        }
+
+        double getDisplayLength(sal_Int32 nIndex, sal_Int32 nLength) const
+        {
+            drawinglayer::primitive2d::TextLayouterDevice aTextLayouter;
+            double fRetval(0.0);
+
+            if(maFont.IsVertical())
+            {
+                fRetval = aTextLayouter.getTextHeight() * static_cast<double>(nLength);
+            }
+            else
+            {
+                fRetval = aTextLayouter.getTextWidth(maText, getPortionIndex(nIndex, nLength), nLength);
+            }
+
+            return fRetval;
+        }
+    };
+} // end of anonymous namespace
+
+
+// TextBreakup helper
+
+namespace
+{
+    class impTextBreakupHandler
+    {
+        SdrOutliner&                                mrOutliner;
+        ::std::vector< impPathTextPortion >         maPathTextPortions;
+
+        DECL_LINK(decompositionPathTextPrimitive, DrawPortionInfo*, void );
+
+    public:
+        explicit impTextBreakupHandler(SdrOutliner& rOutliner)
+        :   mrOutliner(rOutliner)
+        {
+        }
+
+        const ::std::vector< impPathTextPortion >& decompositionPathTextPrimitive()
+        {
+            // strip portions to maPathTextPortions
+            mrOutliner.SetDrawPortionHdl(LINK(this, impTextBreakupHandler, decompositionPathTextPrimitive));
+            mrOutliner.StripPortions();
+
+            if(!maPathTextPortions.empty())
+            {
+                // sort portions by paragraph, x and y
+                ::std::sort(maPathTextPortions.begin(), maPathTextPortions.end());
+            }
+
+            return maPathTextPortions;
+        }
+    };
+
+    IMPL_LINK(impTextBreakupHandler, decompositionPathTextPrimitive, DrawPortionInfo*, pInfo, void)
+    {
+        maPathTextPortions.emplace_back(*pInfo);
+    }
+} // end of anonymous namespace
+
+
+// TextBreakup one poly and one paragraph helper
+
+namespace
+{
+    class impPolygonParagraphHandler
+    {
+        const drawinglayer::attribute::SdrFormTextAttribute         maSdrFormTextAttribute; // FormText parameters
+        std::vector< drawinglayer::primitive2d::BasePrimitive2D* >& mrDecomposition;        // destination primitive list
+        std::vector< drawinglayer::primitive2d::BasePrimitive2D* >& mrShadowDecomposition;  // destination primitive list for shadow
+        Reference < css::i18n::XBreakIterator >                     mxBreak;                // break iterator
+
+        static double getParagraphTextLength(const ::std::vector< const impPathTextPortion* >& rTextPortions)
+        {
+            drawinglayer::primitive2d::TextLayouterDevice aTextLayouter;
+            double fRetval(0.0);
+
+            for(const impPathTextPortion* pCandidate : rTextPortions)
+            {
+                if(pCandidate && pCandidate->getTextLength())
+                {
+                    aTextLayouter.setFont(pCandidate->getFont());
+                    fRetval += pCandidate->getDisplayLength(0, pCandidate->getTextLength());
+                }
+            }
+
+            return fRetval;
+        }
+
+        sal_Int32 getNextGlyphLen(const impPathTextPortion* pCandidate, sal_Int32 nPosition, const css::lang::Locale& rFontLocale)
+        {
+            sal_Int32 nNextGlyphLen(1);
+
+            if(mxBreak.is())
+            {
+                sal_Int32 nDone(0);
+                nNextGlyphLen = mxBreak->nextCharacters(pCandidate->getText(), nPosition,
+                    rFontLocale, CharacterIteratorMode::SKIPCELL, 1, nDone) - nPosition;
+            }
+
+            return nNextGlyphLen;
+        }
+
+    public:
+        impPolygonParagraphHandler(
+            const drawinglayer::attribute::SdrFormTextAttribute& rSdrFormTextAttribute,
+            std::vector< drawinglayer::primitive2d::BasePrimitive2D* >& rDecomposition,
+            std::vector< drawinglayer::primitive2d::BasePrimitive2D* >& rShadowDecomposition)
+        :   maSdrFormTextAttribute(rSdrFormTextAttribute),
+            mrDecomposition(rDecomposition),
+            mrShadowDecomposition(rShadowDecomposition)
+        {
+            // prepare BreakIterator
+            Reference < XComponentContext > xContext = ::comphelper::getProcessComponentContext();
+            mxBreak = css::i18n::BreakIterator::create(xContext);
+        }
+
+        void HandlePair(const basegfx::B2DPolygon& rPolygonCandidate, const ::std::vector< const impPathTextPortion* >& rTextPortions)
+        {
+            // prepare polygon geometry, take into account as many parameters as possible
+            basegfx::B2DPolygon aPolygonCandidate(rPolygonCandidate);
+            const double fPolyLength(basegfx::utils::getLength(aPolygonCandidate));
+            double fPolyEnd(fPolyLength);
+            double fPolyStart(0.0);
+            double fAutosizeScaleFactor(1.0);
+            bool bAutosizeScale(false);
+
+            if(maSdrFormTextAttribute.getFormTextMirror())
+            {
+                aPolygonCandidate.flip();
+            }
+
+            if(maSdrFormTextAttribute.getFormTextStart()
+                && (XFormTextAdjust::Left == maSdrFormTextAttribute.getFormTextAdjust()
+                    || XFormTextAdjust::Right == maSdrFormTextAttribute.getFormTextAdjust()))
+            {
+                if(XFormTextAdjust::Left == maSdrFormTextAttribute.getFormTextAdjust())
+                {
+                    fPolyStart += maSdrFormTextAttribute.getFormTextStart();
+
+                    if(fPolyStart > fPolyEnd)
+                    {
+                        fPolyStart = fPolyEnd;
+                    }
+                }
+                else
+                {
+                    fPolyEnd -= maSdrFormTextAttribute.getFormTextStart();
+
+                    if(fPolyEnd < fPolyStart)
+                    {
+                        fPolyEnd = fPolyStart;
+                    }
+                }
+            }
+
+            if(XFormTextAdjust::Left != maSdrFormTextAttribute.getFormTextAdjust())
+            {
+                // calculate total text length of this paragraph, some layout needs to be done
+                const double fParagraphTextLength(getParagraphTextLength(rTextPortions));
+
+                // check if text is too long for paragraph. If yes, handle as if left aligned (default),
+                // but still take care of XFormTextAdjust::AutoSize in that case
+                const bool bTextTooLong(fParagraphTextLength > (fPolyEnd - fPolyStart));
+
+                if(XFormTextAdjust::Right == maSdrFormTextAttribute.getFormTextAdjust())
+                {
+                    if(!bTextTooLong)
+                    {
+                        // if right aligned, add difference to polygon start
+                        fPolyStart += ((fPolyEnd - fPolyStart) - fParagraphTextLength);
+                    }
+                }
+                else if(XFormTextAdjust::Center == maSdrFormTextAttribute.getFormTextAdjust())
+                {
+                    if(!bTextTooLong)
+                    {
+                        // if centered, add half of difference to polygon start
+                        fPolyStart += ((fPolyEnd - fPolyStart) - fParagraphTextLength) / 2.0;
+                    }
+                }
+                else if(XFormTextAdjust::AutoSize == maSdrFormTextAttribute.getFormTextAdjust())
+                {
+                    // if scale, prepare scale factor between curve length and text length
+                    if(0.0 != fParagraphTextLength)
+                    {
+                        fAutosizeScaleFactor = (fPolyEnd - fPolyStart) / fParagraphTextLength;
+                        bAutosizeScale = true;
+                    }
+                }
+            }
+
+            // handle text portions for this paragraph
+            for(auto a = rTextPortions.begin(); a != rTextPortions.end() && fPolyStart < fPolyEnd; ++a)
+            {
+                const impPathTextPortion* pCandidate = *a;
+                basegfx::B2DVector aFontScaling;
+
+                if(pCandidate && pCandidate->getTextLength())
+                {
+                    const drawinglayer::attribute::FontAttribute aCandidateFontAttribute(
+                        drawinglayer::primitive2d::getFontAttributeFromVclFont(
+                            aFontScaling,
+                            pCandidate->getFont(),
+                            pCandidate->isRTL(),
+                            false));
+
+                    drawinglayer::primitive2d::TextLayouterDevice aTextLayouter;
+                    aTextLayouter.setFont(pCandidate->getFont());
+                    sal_Int32 nUsedTextLength(0);
+
+                    while(nUsedTextLength < pCandidate->getTextLength() && fPolyStart < fPolyEnd)
+                    {
+                        sal_Int32 nNextGlyphLen(getNextGlyphLen(pCandidate, pCandidate->getTextStart() + nUsedTextLength, pCandidate->getLocale()));
+
+                        // prepare portion length. Takes RTL sections into account.
+                        double fPortionLength(pCandidate->getDisplayLength(nUsedTextLength, nNextGlyphLen));
+
+                        if(bAutosizeScale)
+                        {
+                            // when autosize scaling, expand portion length
+                            fPortionLength *= fAutosizeScaleFactor;
+                        }
+
+                        // create transformation
+                        basegfx::B2DHomMatrix aNewTransformA, aNewTransformB, aNewShadowTransform;
+                        basegfx::B2DPoint aStartPos(basegfx::utils::getPositionAbsolute(aPolygonCandidate, fPolyStart, fPolyLength));
+                        basegfx::B2DPoint aEndPos(aStartPos);
+
+                        // add font scaling
+                        aNewTransformA.scale(aFontScaling.getX(), aFontScaling.getY());
+
+                        // prepare scaling of text primitive
+                        if(bAutosizeScale)
+                        {
+                            // when autosize scaling, expand text primitive scaling to it
+                            aNewTransformA.scale(fAutosizeScaleFactor, fAutosizeScaleFactor);
+                        }
+
+                        // eventually create shadow primitives from aDecomposition and add to rDecomposition
+                        const bool bShadow(XFormTextShadow::NONE != maSdrFormTextAttribute.getFormTextShadow());
+
+                        if(bShadow)
+                        {
+                            if(XFormTextShadow::Normal == maSdrFormTextAttribute.getFormTextShadow())
+                            {
+                                aNewShadowTransform.translate(
+                                    maSdrFormTextAttribute.getFormTextShdwXVal(),
+                                    -maSdrFormTextAttribute.getFormTextShdwYVal());
+                            }
+                            else // XFormTextShadow::Slant
+                            {
+                                double fScaleValue(maSdrFormTextAttribute.getFormTextShdwYVal() / 100.0);
+                                double fShearValue(-maSdrFormTextAttribute.getFormTextShdwXVal() * F_PI1800);
+
+                                aNewShadowTransform.scale(1.0, fScaleValue);
+                                aNewShadowTransform.shearX(sin(fShearValue));
+                                aNewShadowTransform.scale(1.0, cos(fShearValue));
+                            }
+                        }
+
+                        switch(maSdrFormTextAttribute.getFormTextStyle())
+                        {
+                            case XFormTextStyle::Rotate :
+                            {
+                                aEndPos = basegfx::utils::getPositionAbsolute(aPolygonCandidate, fPolyStart + fPortionLength, fPolyLength);
+                                const basegfx::B2DVector aDirection(aEndPos - aStartPos);
+                                aNewTransformB.rotate(atan2(aDirection.getY(), aDirection.getX()));
+                                aNewTransformB.translate(aStartPos.getX(), aStartPos.getY());
+
+                                break;
+                            }
+                            case XFormTextStyle::Upright :
+                            {
+                                aNewTransformB.translate(aStartPos.getX() - (fPortionLength / 2.0), aStartPos.getY());
+
+                                break;
+                            }
+                            case XFormTextStyle::SlantX :
+                            {
+                                aEndPos = basegfx::utils::getPositionAbsolute(aPolygonCandidate, fPolyStart + fPortionLength, fPolyLength);
+                                const basegfx::B2DVector aDirection(aEndPos - aStartPos);
+                                const double fShearValue(atan2(aDirection.getY(), aDirection.getX()));
+                                const double fSin(sin(fShearValue));
+                                const double fCos(cos(fShearValue));
+
+                                aNewTransformB.shearX(-fSin);
+
+                                // Scale may lead to objects without height since fCos == 0.0 is possible.
+                                // Renderers need to handle that, it's not a forbidden value and does not
+                                // need to be avoided
+                                aNewTransformB.scale(1.0, fCos);
+                                aNewTransformB.translate(aStartPos.getX() - (fPortionLength / 2.0), aStartPos.getY());
+
+                                break;
+                            }
+                            case XFormTextStyle::SlantY :
+                            {
+                                aEndPos = basegfx::utils::getPositionAbsolute(aPolygonCandidate, fPolyStart + fPortionLength, fPolyLength);
+                                const basegfx::B2DVector aDirection(aEndPos - aStartPos);
+                                const double fShearValue(atan2(aDirection.getY(), aDirection.getX()));
+                                const double fCos(cos(fShearValue));
+                                const double fTan(tan(fShearValue));
+
+                                // shear to 'stand' on the curve
+                                aNewTransformB.shearY(fTan);
+
+                                // scale in X to make as tight as needed. As with XFT_SLANT_X, this may
+                                // lead to primitives without width which the renderers will handle
+                                aNewTransformA.scale(fCos, 1.0);
+
+                                aNewTransformB.translate(aStartPos.getX(), aStartPos.getY());
+
+                                break;
+                            }
+                            default : break; // XFormTextStyle::NONE
+                        }
+
+                        // distance from path?
+                        if(maSdrFormTextAttribute.getFormTextDistance())
+                        {
+                            if(aEndPos.equal(aStartPos))
+                            {
+                                aEndPos = basegfx::utils::getPositionAbsolute(aPolygonCandidate, fPolyStart + fPortionLength, fPolyLength);
+                            }
+
+                            // use back vector (aStartPos - aEndPos) here to get mirrored perpendicular as in old stuff
+                            const basegfx::B2DVector aPerpendicular(
+                                basegfx::getNormalizedPerpendicular(aStartPos - aEndPos) *
+                                maSdrFormTextAttribute.getFormTextDistance());
+                            aNewTransformB.translate(aPerpendicular.getX(), aPerpendicular.getY());
+                        }
+
+                        if(!pCandidate->getText().isEmpty() && nNextGlyphLen)
+                        {
+                            const sal_Int32 nPortionIndex(pCandidate->getPortionIndex(nUsedTextLength, nNextGlyphLen));
+                            ::std::vector< double > aNewDXArray;
+
+                            if(nNextGlyphLen > 1 && !pCandidate->getDoubleDXArray().empty())
+                            {
+                                // copy DXArray for portion
+                                aNewDXArray.insert(
+                                    aNewDXArray.begin(),
+                                    pCandidate->getDoubleDXArray().begin() + nPortionIndex,
+                                    pCandidate->getDoubleDXArray().begin() + (nPortionIndex + nNextGlyphLen));
+
+                                if(nPortionIndex > 0)
+                                {
+                                    // adapt to portion start
+                                    double fDXOffset= *(pCandidate->getDoubleDXArray().begin() + (nPortionIndex - 1));
+                                    ::std::transform(
+                                        aNewDXArray.begin(), aNewDXArray.end(),
+                                        aNewDXArray.begin(), [fDXOffset](double x) { return x - fDXOffset; });
+                                }
+
+                                if(bAutosizeScale)
+                                {
+                                    // when autosize scaling, adapt to DXArray, too
+                                    ::std::transform(
+                                        aNewDXArray.begin(), aNewDXArray.end(),
+                                        aNewDXArray.begin(), [fAutosizeScaleFactor](double x) { return x * fAutosizeScaleFactor; });
+                                }
+                            }
+
+                            if(bShadow)
+                            {
+                                // shadow primitive creation
+                                const Color aShadowColor(maSdrFormTextAttribute.getFormTextShdwColor());
+                                const basegfx::BColor aRGBShadowColor(aShadowColor.getBColor());
+
+                                drawinglayer::primitive2d::TextSimplePortionPrimitive2D* pNew =
+                                    new drawinglayer::primitive2d::TextSimplePortionPrimitive2D(
+                                        aNewTransformB * aNewShadowTransform * aNewTransformA,
+                                        pCandidate->getText(),
+                                        nPortionIndex,
+                                        nNextGlyphLen,
+                                        aNewDXArray,
+                                        aCandidateFontAttribute,
+                                        pCandidate->getLocale(),
+                                        aRGBShadowColor);
+
+                                mrShadowDecomposition.push_back(pNew);
+                            }
+
+                            {
+                                // primitive creation
+                                const Color aColor(pCandidate->getFont().GetColor());
+                                const basegfx::BColor aRGBColor(aColor.getBColor());
+
+                                drawinglayer::primitive2d::TextSimplePortionPrimitive2D* pNew =
+                                    new drawinglayer::primitive2d::TextSimplePortionPrimitive2D(
+                                        aNewTransformB * aNewTransformA,
+                                        pCandidate->getText(),
+                                        nPortionIndex,
+                                        nNextGlyphLen,
+                                        aNewDXArray,
+                                        aCandidateFontAttribute,
+                                        pCandidate->getLocale(),
+                                        aRGBColor);
+
+                                mrDecomposition.push_back(pNew);
+                            }
+                        }
+
+                        // consume from portion
+                        nUsedTextLength += nNextGlyphLen;
+
+                        // consume from polygon
+                        fPolyStart += fPortionLength;
+                    }
+                }
+            }
+        }
+    };
+} // end of anonymous namespace
+
+
+// primitive decomposition helpers
+
+namespace
+{
+    void impAddPolygonStrokePrimitives(
+        const basegfx::B2DPolyPolygonVector& rB2DPolyPolyVector,
+        const basegfx::B2DHomMatrix& rTransform,
+        const drawinglayer::attribute::LineAttribute& rLineAttribute,
+        const drawinglayer::attribute::StrokeAttribute& rStrokeAttribute,
+        std::vector< drawinglayer::primitive2d::BasePrimitive2D* >& rTarget)
+    {
+        for(const auto& rB2DPolyPolygon : rB2DPolyPolyVector)
+        {
+            // prepare PolyPolygons
+            basegfx::B2DPolyPolygon aB2DPolyPolygon = rB2DPolyPolygon;
+            aB2DPolyPolygon.transform(rTransform);
+
+            for(auto const& rPolygon : aB2DPolyPolygon)
+            {
+                // create one primitive per polygon
+                drawinglayer::primitive2d::PolygonStrokePrimitive2D* pNew =
+                    new drawinglayer::primitive2d::PolygonStrokePrimitive2D(
+                        rPolygon, rLineAttribute, rStrokeAttribute);
+                rTarget.push_back(pNew);
+            }
+        }
+    }
+
+    drawinglayer::primitive2d::Primitive2DContainer impAddPathTextOutlines(
+        const std::vector< drawinglayer::primitive2d::BasePrimitive2D* >& rSource,
+        const drawinglayer::attribute::SdrFormTextOutlineAttribute& rOutlineAttribute)
+    {
+        std::vector< drawinglayer::primitive2d::BasePrimitive2D* > aNewPrimitives;
+
+        for(drawinglayer::primitive2d::BasePrimitive2D* a : rSource)
+        {
+            const drawinglayer::primitive2d::TextSimplePortionPrimitive2D* pTextCandidate = dynamic_cast< const drawinglayer::primitive2d::TextSimplePortionPrimitive2D* >(a);
+
+            if(pTextCandidate)
+            {
+                basegfx::B2DPolyPolygonVector aB2DPolyPolyVector;
+                basegfx::B2DHomMatrix aPolygonTransform;
+
+                // get text outlines and their object transformation
+                pTextCandidate->getTextOutlinesAndTransformation(aB2DPolyPolyVector, aPolygonTransform);
+
+                if(!aB2DPolyPolyVector.empty())
+                {
+                    // create stroke primitives
+                    std::vector< drawinglayer::primitive2d::BasePrimitive2D* > aStrokePrimitives;
+                    impAddPolygonStrokePrimitives(
+                        aB2DPolyPolyVector,
+                        aPolygonTransform,
+                        rOutlineAttribute.getLineAttribute(),
+                        rOutlineAttribute.getStrokeAttribute(),
+                        aStrokePrimitives);
+                    const sal_uInt32 nStrokeCount(aStrokePrimitives.size());
+
+                    if(nStrokeCount)
+                    {
+                        if(rOutlineAttribute.getTransparence())
+                        {
+                            // create UnifiedTransparencePrimitive2D
+                            drawinglayer::primitive2d::Primitive2DContainer aStrokePrimitiveSequence(nStrokeCount);
+
+                            for(sal_uInt32 b(0); b < nStrokeCount; b++)
+                            {
+                                aStrokePrimitiveSequence[b] = drawinglayer::primitive2d::Primitive2DReference(aStrokePrimitives[b]);
+                            }
+
+                            drawinglayer::primitive2d::UnifiedTransparencePrimitive2D* pNew2 =
+                                new drawinglayer::primitive2d::UnifiedTransparencePrimitive2D(
+                                    aStrokePrimitiveSequence,
+                                    static_cast<double>(rOutlineAttribute.getTransparence()) / 100.0);
+                            aNewPrimitives.push_back(pNew2);
+                        }
+                        else
+                        {
+                            // add polygons to rDecomposition as polygonStrokePrimitives
+                            aNewPrimitives.insert(aNewPrimitives.end(), aStrokePrimitives.begin(), aStrokePrimitives.end());
+                        }
+                    }
+                }
+            }
+        }
+
+        const sal_uInt32 nNewCount(aNewPrimitives.size());
+
+        if(nNewCount)
+        {
+            drawinglayer::primitive2d::Primitive2DContainer aRetval(nNewCount);
+
+            for(sal_uInt32 a(0); a < nNewCount; a++)
+            {
+                aRetval[a] = drawinglayer::primitive2d::Primitive2DReference(aNewPrimitives[a]);
+            }
+
+            return aRetval;
+        }
+        else
+        {
+            return drawinglayer::primitive2d::Primitive2DContainer();
+        }
+    }
+} // end of anonymous namespace
+
+
+// primitive decomposition
+
+void SdrTextObj::impDecomposePathTextPrimitive(
+    drawinglayer::primitive2d::Primitive2DContainer& rTarget,
+    const drawinglayer::primitive2d::SdrPathTextPrimitive2D& rSdrPathTextPrimitive,
+    const drawinglayer::geometry::ViewInformation2D& aViewInformation) const
+{
+    drawinglayer::primitive2d::Primitive2DContainer aRetvalA;
+    drawinglayer::primitive2d::Primitive2DContainer aRetvalB;
+
+    // prepare outliner
+    SdrOutliner& rOutliner = ImpGetDrawOutliner();
+    rOutliner.SetUpdateMode(true);
+    rOutliner.Clear();
+    rOutliner.SetPaperSize(Size(LONG_MAX,LONG_MAX));
+    rOutliner.SetText(rSdrPathTextPrimitive.getOutlinerParaObject());
+
+    // set visualizing page at Outliner; needed e.g. for PageNumberField decomposition
+    rOutliner.setVisualizedPage(GetSdrPageFromXDrawPage(aViewInformation.getVisualizedPage()));
+
+    // now break up to text portions
+    impTextBreakupHandler aConverter(rOutliner);
+    const ::std::vector< impPathTextPortion > rPathTextPortions = aConverter.decompositionPathTextPrimitive();
+
+    if(!rPathTextPortions.empty())
+    {
+        // get FormText and polygon values
+        const drawinglayer::attribute::SdrFormTextAttribute& rFormTextAttribute = rSdrPathTextPrimitive.getSdrFormTextAttribute();
+        const basegfx::B2DPolyPolygon& rPathPolyPolygon(rSdrPathTextPrimitive.getPathPolyPolygon());
+
+        // get loop count
+        sal_uInt32 nLoopCount(rPathPolyPolygon.count());
+
+        if(o3tl::make_unsigned(rOutliner.GetParagraphCount()) < nLoopCount)
+        {
+            nLoopCount = rOutliner.GetParagraphCount();
+        }
+
+        if(nLoopCount)
+        {
+            // prepare common decomposition stuff
+            std::vector< drawinglayer::primitive2d::BasePrimitive2D* > aRegularDecomposition;
+            std::vector< drawinglayer::primitive2d::BasePrimitive2D* > aShadowDecomposition;
+            impPolygonParagraphHandler aPolygonParagraphHandler(
+                rFormTextAttribute,
+                aRegularDecomposition,
+                aShadowDecomposition);
+            sal_uInt32 a;
+
+            for(a = 0; a < nLoopCount; a++)
+            {
+                // filter text portions for this paragraph
+                ::std::vector< const impPathTextPortion* > aParagraphTextPortions;
+
+                for(const auto & rCandidate : rPathTextPortions)
+                {
+                    if(static_cast<sal_uInt32>(rCandidate.getParagraph()) == a)
+                    {
+                        aParagraphTextPortions.push_back(&rCandidate);
+                    }
+                }
+
+                // handle data pair polygon/ParagraphTextPortions
+                if(!aParagraphTextPortions.empty())
+                {
+                    aPolygonParagraphHandler.HandlePair(rPathPolyPolygon.getB2DPolygon(a), aParagraphTextPortions);
+                }
+            }
+
+            const sal_uInt32 nShadowCount(aShadowDecomposition.size());
+            const sal_uInt32 nRegularCount(aRegularDecomposition.size());
+
+            if(nShadowCount)
+            {
+                // add shadow primitives to decomposition
+                aRetvalA.resize(nShadowCount);
+
+                for(a = 0; a < nShadowCount; a++)
+                {
+                    aRetvalA[a] = drawinglayer::primitive2d::Primitive2DReference(aShadowDecomposition[a]);
+                }
+
+                // if necessary, add shadow outlines
+                if(rFormTextAttribute.getFormTextOutline()
+                    && !rFormTextAttribute.getShadowOutline().isDefault())
+                {
+                    const drawinglayer::primitive2d::Primitive2DContainer aOutlines(
+                        impAddPathTextOutlines(
+                            aShadowDecomposition,
+                            rFormTextAttribute.getShadowOutline()));
+
+                    aRetvalA.append(aOutlines);
+                }
+            }
+
+            if(nRegularCount)
+            {
+                // add normal primitives to decomposition
+                aRetvalB.resize(nRegularCount);
+
+                for(a = 0; a < nRegularCount; a++)
+                {
+                    aRetvalB[a] = drawinglayer::primitive2d::Primitive2DReference(aRegularDecomposition[a]);
+                }
+
+                // if necessary, add outlines
+                if(rFormTextAttribute.getFormTextOutline()
+                    && !rFormTextAttribute.getOutline().isDefault())
+                {
+                    const drawinglayer::primitive2d::Primitive2DContainer aOutlines(
+                        impAddPathTextOutlines(
+                            aRegularDecomposition,
+                            rFormTextAttribute.getOutline()));
+
+                    aRetvalB.append(aOutlines);
+                }
+            }
+        }
+    }
+
+    // clean up outliner
+    rOutliner.SetDrawPortionHdl(Link<DrawPortionInfo*,void>());
+    rOutliner.Clear();
+    rOutliner.setVisualizedPage(nullptr);
+
+    // concatenate all results
+    rTarget.append(aRetvalA);
+    rTarget.append(aRetvalB);
+}
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotxat.cxx b/svx/source/svdraw/svdotxat.cxx
new file mode 100644
index 000000000..315e57e7c
--- /dev/null
+++ b/svx/source/svdraw/svdotxat.cxx
@@ -0,0 +1,455 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <comphelper/string.hxx>
+#include <svl/style.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdorect.hxx>
+#include <svx/svdocapt.hxx>
+#include <editeng/editdata.hxx>
+#include <svx/sdtfchim.hxx>
+
+
+#include <editeng/outlobj.hxx>
+#include <editeng/outliner.hxx>
+#include <editeng/editobj.hxx>
+
+namespace {
+// The style family which is appended to the style names is padded to this many characters.
+const short PADDING_LENGTH_FOR_STYLE_FAMILY = 5;
+// this character will be used to pad the style families when they are appended to the style names
+const char PADDING_CHARACTER_FOR_STYLE_FAMILY = ' ';
+}
+
+bool SdrTextObj::AdjustTextFrameWidthAndHeight( tools::Rectangle& rR, bool bHgt, bool bWdt ) const
+{
+    if (!bTextFrame)
+        // Not a text frame.  Bail out.
+        return false;
+
+    if (rR.IsEmpty())
+        // Empty rectangle.
+        return false;
+
+    bool bFitToSize = IsFitToSize();
+    if (bFitToSize)
+        return false;
+
+    bool bWdtGrow = bWdt && IsAutoGrowWidth();
+    bool bHgtGrow = bHgt && IsAutoGrowHeight();
+    if (!bWdtGrow && !bHgtGrow)
+        // Not supposed to auto-adjust width or height.
+        return false;
+
+    SdrTextAniKind eAniKind = GetTextAniKind();
+    SdrTextAniDirection eAniDir = GetTextAniDirection();
+
+    bool bScroll = eAniKind == SdrTextAniKind::Scroll || eAniKind == SdrTextAniKind::Alternate || eAniKind == SdrTextAniKind::Slide;
+    bool bHScroll = bScroll && (eAniDir == SdrTextAniDirection::Left || eAniDir == SdrTextAniDirection::Right);
+    bool bVScroll = bScroll && (eAniDir == SdrTextAniDirection::Up || eAniDir == SdrTextAniDirection::Down);
+
+    tools::Rectangle aOldRect = rR;
+    long nHgt = 0, nMinHgt = 0, nMaxHgt = 0;
+    long nWdt = 0, nMinWdt = 0, nMaxWdt = 0;
+
+    Size aNewSize = rR.GetSize();
+    aNewSize.AdjustWidth( -1 ); aNewSize.AdjustHeight( -1 );
+
+    Size aMaxSiz(100000, 100000);
+    Size aTmpSiz(getSdrModelFromSdrObject().GetMaxObjSize());
+
+    if (aTmpSiz.Width())
+        aMaxSiz.setWidth( aTmpSiz.Width() );
+    if (aTmpSiz.Height())
+        aMaxSiz.setHeight( aTmpSiz.Height() );
+
+    if (bWdtGrow)
+    {
+        nMinWdt = GetMinTextFrameWidth();
+        nMaxWdt = GetMaxTextFrameWidth();
+        if (nMaxWdt == 0 || nMaxWdt > aMaxSiz.Width())
+            nMaxWdt = aMaxSiz.Width();
+        if (nMinWdt <= 0)
+            nMinWdt = 1;
+
+        aNewSize.setWidth( nMaxWdt );
+    }
+
+    if (bHgtGrow)
+    {
+        nMinHgt = GetMinTextFrameHeight();
+        nMaxHgt = GetMaxTextFrameHeight();
+        if (nMaxHgt == 0 || nMaxHgt > aMaxSiz.Height())
+            nMaxHgt = aMaxSiz.Height();
+        if (nMinHgt <= 0)
+            nMinHgt = 1;
+
+        aNewSize.setHeight( nMaxHgt );
+    }
+
+    long nHDist = GetTextLeftDistance() + GetTextRightDistance();
+    long nVDist = GetTextUpperDistance() + GetTextLowerDistance();
+    aNewSize.AdjustWidth( -nHDist );
+    aNewSize.AdjustHeight( -nVDist );
+
+    if (aNewSize.Width() < 2)
+        aNewSize.setWidth( 2 );
+    if (aNewSize.Height() < 2)
+        aNewSize.setHeight( 2 );
+
+    if (!IsInEditMode())
+    {
+        if (bHScroll)
+            aNewSize.setWidth( 0x0FFFFFFF ); // don't break ticker text
+        if (bVScroll)
+            aNewSize.setHeight( 0x0FFFFFFF );
+    }
+
+    if (pEdtOutl)
+    {
+        pEdtOutl->SetMaxAutoPaperSize(aNewSize);
+        if (bWdtGrow)
+        {
+            Size aSiz2(pEdtOutl->CalcTextSize());
+            nWdt = aSiz2.Width() + 1; // a little tolerance
+            if (bHgtGrow)
+                nHgt = aSiz2.Height() + 1; // a little tolerance
+        }
+        else
+        {
+            nHgt = pEdtOutl->GetTextHeight() + 1; // a little tolerance
+        }
+    }
+    else
+    {
+        Outliner& rOutliner = ImpGetDrawOutliner();
+        rOutliner.SetPaperSize(aNewSize);
+        rOutliner.SetUpdateMode(true);
+        // TODO: add the optimization with bPortionInfoChecked etc. here
+        OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+        if (pOutlinerParaObject)
+        {
+            rOutliner.SetText(*pOutlinerParaObject);
+            rOutliner.SetFixedCellHeight(GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT).GetValue());
+        }
+
+        if (bWdtGrow)
+        {
+            Size aSiz2(rOutliner.CalcTextSize());
+            nWdt = aSiz2.Width() + 1; // a little tolerance
+            if (bHgtGrow)
+                nHgt = aSiz2.Height() + 1; // a little tolerance
+        }
+        else
+        {
+            nHgt = rOutliner.GetTextHeight() + 1; // a little tolerance
+        }
+        rOutliner.Clear();
+    }
+
+    if (nWdt < nMinWdt)
+        nWdt = nMinWdt;
+    if (nWdt > nMaxWdt)
+        nWdt = nMaxWdt;
+    nWdt += nHDist;
+    if (nWdt < 1)
+        nWdt = 1; // nHDist may be negative
+    if (nHgt < nMinHgt)
+        nHgt = nMinHgt;
+    if (nHgt > nMaxHgt)
+        nHgt = nMaxHgt;
+    nHgt += nVDist;
+    if (nHgt < 1)
+        nHgt = 1; // nVDist may be negative
+    long nWdtGrow = nWdt - (rR.Right() - rR.Left());
+    long nHgtGrow = nHgt - (rR.Bottom() - rR.Top());
+
+    if (nWdtGrow == 0)
+        bWdtGrow = false;
+    if (nHgtGrow == 0)
+        bHgtGrow = false;
+
+    if (!bWdtGrow && !bHgtGrow)
+        return false;
+
+    if (bWdtGrow)
+    {
+        SdrTextHorzAdjust eHAdj = GetTextHorizontalAdjust();
+
+        if (eHAdj == SDRTEXTHORZADJUST_LEFT)
+            rR.AdjustRight(nWdtGrow );
+        else if (eHAdj == SDRTEXTHORZADJUST_RIGHT)
+            rR.AdjustLeft( -nWdtGrow );
+        else
+        {
+            long nWdtGrow2 = nWdtGrow / 2;
+            rR.AdjustLeft( -nWdtGrow2 );
+            rR.SetRight( rR.Left() + nWdt );
+        }
+    }
+
+    if (bHgtGrow)
+    {
+        SdrTextVertAdjust eVAdj = GetTextVerticalAdjust();
+
+        if (eVAdj == SDRTEXTVERTADJUST_TOP)
+            rR.AdjustBottom(nHgtGrow );
+        else if (eVAdj == SDRTEXTVERTADJUST_BOTTOM)
+            rR.AdjustTop( -nHgtGrow );
+        else
+        {
+            long nHgtGrow2 = nHgtGrow / 2;
+            rR.AdjustTop( -nHgtGrow2 );
+            rR.SetBottom( rR.Top() + nHgt );
+        }
+    }
+
+    if (aGeo.nRotationAngle)
+    {
+        // Object is rotated.
+        Point aD1(rR.TopLeft());
+        aD1 -= aOldRect.TopLeft();
+        Point aD2(aD1);
+        RotatePoint(aD2, Point(), aGeo.nSin, aGeo.nCos);
+        aD2 -= aD1;
+        rR.Move(aD2.X(), aD2.Y());
+    }
+
+    return true;
+}
+
+bool SdrTextObj::NbcAdjustTextFrameWidthAndHeight(bool bHgt, bool bWdt)
+{
+    bool bRet = AdjustTextFrameWidthAndHeight(maRect,bHgt,bWdt);
+    if (bRet)
+    {
+        SetRectsDirty();
+        if (dynamic_cast<const SdrRectObj *>(this) != nullptr) { // this is a hack
+            static_cast<SdrRectObj*>(this)->SetXPolyDirty();
+        }
+        if (dynamic_cast<const SdrCaptionObj *>(this) != nullptr) { // this is a hack
+            static_cast<SdrCaptionObj*>(this)->ImpRecalcTail();
+        }
+    }
+    return bRet;
+}
+
+bool SdrTextObj::AdjustTextFrameWidthAndHeight()
+{
+    tools::Rectangle aNewRect(maRect);
+    bool bRet=AdjustTextFrameWidthAndHeight(aNewRect);
+    if (bRet) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        maRect = aNewRect;
+        SetRectsDirty();
+        if (dynamic_cast<const SdrRectObj *>(this) != nullptr) { // this is a hack
+            static_cast<SdrRectObj*>(this)->SetXPolyDirty();
+        }
+        bool bScPostIt = false;
+        if (auto pCaptionObj = dynamic_cast<SdrCaptionObj *>(this)) { // this is a hack
+            pCaptionObj->ImpRecalcTail();
+            // tdf#114956, tdf#138549 use GetSpecialTextBoxShadow to recognize
+            // that this SdrCaption is for a ScPostit
+            bScPostIt = pCaptionObj->GetSpecialTextBoxShadow();
+        }
+
+        // to not slow down EditView visualization on Overlay (see
+        // TextEditOverlayObject) it is necessary to suppress the
+        // Invalidates for the deep repaint when the size of the
+        // TextFrame changed (AdjustTextFrameWidthAndHeight returned
+        // true). The ObjectChanges are valid, invalidate will be
+        // done on EndTextEdit anyways
+        const bool bSuppressChangeWhenEditOnOverlay(
+            IsInEditMode() &&
+            GetTextEditOutliner() &&
+            GetTextEditOutliner()->hasEditViewCallbacks());
+
+        if (!bSuppressChangeWhenEditOnOverlay || bScPostIt)
+        {
+            SetChanged();
+            BroadcastObjectChange();
+        }
+
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+    return bRet;
+}
+
+void SdrTextObj::ImpSetTextStyleSheetListeners()
+{
+    SfxStyleSheetBasePool* pStylePool(getSdrModelFromSdrObject().GetStyleSheetPool());
+    if (pStylePool!=nullptr)
+    {
+        std::vector<OUString> aStyleNames;
+        OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+        if (pOutlinerParaObject!=nullptr)
+        {
+            // First, we collect all stylesheets contained in the ParaObject in
+            // the container aStyles. The Family is always appended to the name
+            // of the stylesheet.
+            const EditTextObject& rTextObj=pOutlinerParaObject->GetTextObject();
+            OUString aStyleName;
+            SfxStyleFamily eStyleFam;
+            sal_Int32 nParaCnt=rTextObj.GetParagraphCount();
+
+
+            for(sal_Int32 nParaNum(0); nParaNum < nParaCnt; nParaNum++)
+            {
+                rTextObj.GetStyleSheet(nParaNum, aStyleName, eStyleFam);
+
+                if (!aStyleName.isEmpty())
+                {
+                    AppendFamilyToStyleName(aStyleName, eStyleFam);
+
+                    bool bFnd(false);
+                    sal_uInt32 nNum(aStyleNames.size());
+
+                    while(!bFnd && nNum > 0)
+                    {
+                        // we don't want duplicate stylesheets
+                        nNum--;
+                        bFnd = aStyleName == aStyleNames[nNum];
+                    }
+
+                    if(!bFnd)
+                    {
+                        aStyleNames.push_back(aStyleName);
+                    }
+                }
+            }
+        }
+
+        // now convert the strings in the vector from names to StyleSheet*
+        o3tl::sorted_vector<SfxStyleSheet*> aStyleSheets;
+        while (!aStyleNames.empty()) {
+            OUString aName = aStyleNames.back();
+            aStyleNames.pop_back();
+
+            SfxStyleFamily eFam = ReadFamilyFromStyleName(aName);
+            SfxStyleSheetBase* pStyleBase = pStylePool->Find(aName,eFam);
+            SfxStyleSheet* pStyle = dynamic_cast<SfxStyleSheet*>( pStyleBase );
+            if (pStyle!=nullptr && pStyle!=GetStyleSheet()) {
+                aStyleSheets.insert(pStyle);
+            }
+        }
+        // now remove all superfluous stylesheets
+        sal_uInt16 nNum=GetBroadcasterCount();
+        while (nNum>0) {
+            nNum--;
+            SfxBroadcaster* pBroadcast=GetBroadcasterJOE(nNum);
+            SfxStyleSheet* pStyle=dynamic_cast<SfxStyleSheet*>( pBroadcast );
+            if (pStyle!=nullptr && pStyle!=GetStyleSheet()) { // special case for stylesheet of the object
+                if (aStyleSheets.find(pStyle)==aStyleSheets.end()) {
+                    EndListening(*pStyle);
+                }
+            }
+        }
+        // and finally, merge all stylesheets that are contained in aStyles with previous broadcasters
+        for(SfxStyleSheet* pStyle : aStyleSheets) {
+            // let StartListening see for itself if there's already a listener registered
+            StartListening(*pStyle, DuplicateHandling::Prevent);
+        }
+    }
+}
+
+/**  iterates over the paragraphs of a given SdrObject and removes all
+     hard set character attributes with the which ids contained in the
+     given vector
+*/
+void SdrTextObj::RemoveOutlinerCharacterAttribs( const std::vector<sal_uInt16>& rCharWhichIds )
+{
+    sal_Int32 nText = getTextCount();
+
+    while( --nText >= 0 )
+    {
+        SdrText* pText = getText( nText );
+        OutlinerParaObject* pOutlinerParaObject = pText ? pText->GetOutlinerParaObject() : nullptr;
+
+        if(pOutlinerParaObject)
+        {
+            Outliner* pOutliner = nullptr;
+
+            if( pEdtOutl || (pText == getActiveText()) )
+                pOutliner = pEdtOutl;
+
+            if(!pOutliner)
+            {
+                pOutliner = &ImpGetDrawOutliner();
+                pOutliner->SetText(*pOutlinerParaObject);
+            }
+
+            ESelection aSelAll( 0, 0, EE_PARA_ALL, EE_TEXTPOS_ALL );
+            for( const auto& rWhichId : rCharWhichIds )
+            {
+                pOutliner->RemoveAttribs( aSelAll, false, rWhichId );
+            }
+
+            if(!pEdtOutl || (pText != getActiveText()) )
+            {
+                const sal_Int32 nParaCount = pOutliner->GetParagraphCount();
+                std::unique_ptr<OutlinerParaObject> pTemp = pOutliner->CreateParaObject(0, nParaCount);
+                pOutliner->Clear();
+                NbcSetOutlinerParaObjectForText(std::move(pTemp), pText);
+            }
+        }
+    }
+}
+
+bool SdrTextObj::HasText() const
+{
+    if( pEdtOutl )
+        return HasTextImpl(pEdtOutl);
+
+    OutlinerParaObject* pOPO = GetOutlinerParaObject();
+
+    bool bHasText = false;
+    if( pOPO )
+    {
+        const EditTextObject& rETO = pOPO->GetTextObject();
+        sal_Int32 nParaCount = rETO.GetParagraphCount();
+
+        if( nParaCount > 0 )
+            bHasText = (nParaCount > 1) || (!rETO.GetText( 0 ).isEmpty());
+    }
+
+    return bHasText;
+}
+
+void SdrTextObj::AppendFamilyToStyleName(OUString& styleName, SfxStyleFamily family)
+{
+    OUStringBuffer aFam;
+    aFam.append(static_cast<sal_Int32>(family));
+    comphelper::string::padToLength(aFam, PADDING_LENGTH_FOR_STYLE_FAMILY , PADDING_CHARACTER_FOR_STYLE_FAMILY);
+
+    styleName += "|" + aFam.makeStringAndClear();
+}
+
+SfxStyleFamily SdrTextObj::ReadFamilyFromStyleName(const OUString& styleName)
+{
+    OUString familyString = styleName.copy(styleName.getLength() - PADDING_LENGTH_FOR_STYLE_FAMILY);
+    familyString = comphelper::string::stripEnd(familyString, PADDING_CHARACTER_FOR_STYLE_FAMILY);
+    sal_uInt16 nFam = static_cast<sal_uInt16>(familyString.toInt32());
+    assert(nFam != 0);
+    return static_cast<SfxStyleFamily>(nFam);
+}
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotxdr.cxx b/svx/source/svdraw/svdotxdr.cxx
new file mode 100644
index 000000000..182f4d99f
--- /dev/null
+++ b/svx/source/svdraw/svdotxdr.cxx
@@ -0,0 +1,248 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdotext.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/svddrag.hxx>
+#include <svx/svdview.hxx>
+#include <svx/svdorect.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdoashp.hxx>
+#include <tools/bigint.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/ptrstyle.hxx>
+
+
+sal_uInt32 SdrTextObj::GetHdlCount() const
+{
+    return 8;
+}
+
+void SdrTextObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    for(sal_uInt32 nHdlNum=0; nHdlNum<8; ++nHdlNum)
+    {
+        Point aPnt;
+        SdrHdlKind eKind = SdrHdlKind::UpperLeft;
+        switch (nHdlNum) {
+            case 0: aPnt=maRect.TopLeft();      eKind=SdrHdlKind::UpperLeft; break;
+            case 1: aPnt=maRect.TopCenter();    eKind=SdrHdlKind::Upper; break;
+            case 2: aPnt=maRect.TopRight();     eKind=SdrHdlKind::UpperRight; break;
+            case 3: aPnt=maRect.LeftCenter();   eKind=SdrHdlKind::Left ; break;
+            case 4: aPnt=maRect.RightCenter();  eKind=SdrHdlKind::Right; break;
+            case 5: aPnt=maRect.BottomLeft();   eKind=SdrHdlKind::LowerLeft; break;
+            case 6: aPnt=maRect.BottomCenter(); eKind=SdrHdlKind::Lower; break;
+            case 7: aPnt=maRect.BottomRight();  eKind=SdrHdlKind::LowerRight; break;
+        }
+        if (aGeo.nShearAngle!=0) ShearPoint(aPnt,maRect.TopLeft(),aGeo.nTan);
+        if (aGeo.nRotationAngle!=0) RotatePoint(aPnt,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+        std::unique_ptr<SdrHdl> pH(new SdrHdl(aPnt,eKind));
+        pH->SetObj(const_cast<SdrTextObj*>(this));
+        pH->SetRotationAngle(aGeo.nRotationAngle);
+        rHdlList.AddHdl(std::move(pH));
+    }
+}
+
+
+bool SdrTextObj::hasSpecialDrag() const
+{
+    return true;
+}
+
+tools::Rectangle SdrTextObj::ImpDragCalcRect(const SdrDragStat& rDrag) const
+{
+    tools::Rectangle aTmpRect(maRect);
+    const SdrHdl* pHdl=rDrag.GetHdl();
+    SdrHdlKind eHdl=pHdl==nullptr ? SdrHdlKind::Move : pHdl->GetKind();
+    bool bEcke=(eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::LowerLeft || eHdl==SdrHdlKind::LowerRight);
+    bool bOrtho=rDrag.GetView()!=nullptr && rDrag.GetView()->IsOrtho();
+    bool bBigOrtho=bEcke && bOrtho && rDrag.GetView()->IsBigOrtho();
+    Point aPos(rDrag.GetNow());
+    // Unrotate:
+    if (aGeo.nRotationAngle!=0) RotatePoint(aPos,aTmpRect.TopLeft(),-aGeo.nSin,aGeo.nCos);
+    // Unshear:
+    if (aGeo.nShearAngle!=0) ShearPoint(aPos,aTmpRect.TopLeft(),-aGeo.nTan);
+
+    bool bLft=(eHdl==SdrHdlKind::UpperLeft || eHdl==SdrHdlKind::Left  || eHdl==SdrHdlKind::LowerLeft);
+    bool bRgt=(eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::Right || eHdl==SdrHdlKind::LowerRight);
+    bool bTop=(eHdl==SdrHdlKind::UpperRight || eHdl==SdrHdlKind::Upper || eHdl==SdrHdlKind::UpperLeft);
+    bool bBtm=(eHdl==SdrHdlKind::LowerRight || eHdl==SdrHdlKind::Lower || eHdl==SdrHdlKind::LowerLeft);
+    if (bLft) aTmpRect.SetLeft(aPos.X() );
+    if (bRgt) aTmpRect.SetRight(aPos.X() );
+    if (bTop) aTmpRect.SetTop(aPos.Y() );
+    if (bBtm) aTmpRect.SetBottom(aPos.Y() );
+    if (bOrtho) { // Ortho
+        long nWdt0=maRect.Right() -maRect.Left();
+        long nHgt0=maRect.Bottom()-maRect.Top();
+        long nXMul=aTmpRect.Right() -aTmpRect.Left();
+        long nYMul=aTmpRect.Bottom()-aTmpRect.Top();
+        long nXDiv=nWdt0;
+        long nYDiv=nHgt0;
+        bool bXNeg=(nXMul<0)!=(nXDiv<0);
+        bool bYNeg=(nYMul<0)!=(nYDiv<0);
+        nXMul=std::abs(nXMul);
+        nYMul=std::abs(nYMul);
+        nXDiv=std::abs(nXDiv);
+        nYDiv=std::abs(nYDiv);
+        Fraction aXFact(nXMul,nXDiv); // fractions for canceling
+        Fraction aYFact(nYMul,nYDiv); // and for comparing
+        nXMul=aXFact.GetNumerator();
+        nYMul=aYFact.GetNumerator();
+        nXDiv=aXFact.GetDenominator();
+        nYDiv=aYFact.GetDenominator();
+        if (bEcke) { // corner point handles
+            bool bUseX=(aXFact<aYFact) != bBigOrtho;
+            if (bUseX) {
+                long nNeed=long(BigInt(nHgt0)*BigInt(nXMul)/BigInt(nXDiv));
+                if (bYNeg) nNeed=-nNeed;
+                if (bTop) aTmpRect.SetTop(aTmpRect.Bottom()-nNeed );
+                if (bBtm) aTmpRect.SetBottom(aTmpRect.Top()+nNeed );
+            } else {
+                long nNeed=long(BigInt(nWdt0)*BigInt(nYMul)/BigInt(nYDiv));
+                if (bXNeg) nNeed=-nNeed;
+                if (bLft) aTmpRect.SetLeft(aTmpRect.Right()-nNeed );
+                if (bRgt) aTmpRect.SetRight(aTmpRect.Left()+nNeed );
+            }
+        } else { // apex handles
+            if ((bLft || bRgt) && nXDiv!=0) {
+                long nHgt0b=maRect.Bottom()-maRect.Top();
+                long nNeed=long(BigInt(nHgt0b)*BigInt(nXMul)/BigInt(nXDiv));
+                aTmpRect.AdjustTop( -((nNeed-nHgt0b)/2) );
+                aTmpRect.SetBottom(aTmpRect.Top()+nNeed );
+            }
+            if ((bTop || bBtm) && nYDiv!=0) {
+                long nWdt0b=maRect.Right()-maRect.Left();
+                long nNeed=long(BigInt(nWdt0b)*BigInt(nYMul)/BigInt(nYDiv));
+                aTmpRect.AdjustLeft( -((nNeed-nWdt0b)/2) );
+                aTmpRect.SetRight(aTmpRect.Left()+nNeed );
+            }
+        }
+    }
+    if (dynamic_cast<const SdrObjCustomShape*>(this) ==  nullptr)        // not justifying when in CustomShapes, to be able to detect if a shape has to be mirrored
+        ImpJustifyRect(aTmpRect);
+    return aTmpRect;
+}
+
+
+// drag
+
+bool SdrTextObj::applySpecialDrag(SdrDragStat& rDrag)
+{
+    tools::Rectangle aNewRect(ImpDragCalcRect(rDrag));
+
+    if(aNewRect.TopLeft() != maRect.TopLeft() && (aGeo.nRotationAngle || aGeo.nShearAngle))
+    {
+        Point aNewPos(aNewRect.TopLeft());
+
+        if(aGeo.nShearAngle)
+            ShearPoint(aNewPos,maRect.TopLeft(),aGeo.nTan);
+
+        if(aGeo.nRotationAngle)
+            RotatePoint(aNewPos,maRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+
+        aNewRect.SetPos(aNewPos);
+    }
+
+    if (aNewRect != maRect)
+    {
+        NbcSetLogicRect(aNewRect);
+    }
+
+    return true;
+}
+
+OUString SdrTextObj::getSpecialDragComment(const SdrDragStat& /*rDrag*/) const
+{
+    return ImpGetDescriptionStr(STR_DragRectResize);
+}
+
+
+// Create
+
+bool SdrTextObj::BegCreate(SdrDragStat& rStat)
+{
+    rStat.SetOrtho4Possible();
+    tools::Rectangle aRect1(rStat.GetStart(), rStat.GetNow());
+    aRect1.Justify();
+    rStat.SetActionRect(aRect1);
+    maRect = aRect1;
+    return true;
+}
+
+bool SdrTextObj::MovCreate(SdrDragStat& rStat)
+{
+    tools::Rectangle aRect1;
+    rStat.TakeCreateRect(aRect1);
+    ImpJustifyRect(aRect1);
+    rStat.SetActionRect(aRect1);
+    maRect = aRect1; // for ObjName
+    SetBoundRectDirty();
+    bSnapRectDirty=true;
+    if (dynamic_cast<const SdrRectObj *>(this) != nullptr) {
+        static_cast<SdrRectObj*>(this)->SetXPolyDirty();
+    }
+    return true;
+}
+
+bool SdrTextObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    rStat.TakeCreateRect(maRect);
+    ImpJustifyRect(maRect);
+
+    AdaptTextMinSize();
+
+    SetRectsDirty();
+    if (dynamic_cast<const SdrRectObj *>(this) != nullptr) {
+        static_cast<SdrRectObj*>(this)->SetXPolyDirty();
+    }
+    return (eCmd==SdrCreateCmd::ForceEnd || rStat.GetPointCount()>=2);
+}
+
+void SdrTextObj::BrkCreate(SdrDragStat& /*rStat*/)
+{
+}
+
+bool SdrTextObj::BckCreate(SdrDragStat& /*rStat*/)
+{
+    return true;
+}
+
+basegfx::B2DPolyPolygon SdrTextObj::TakeCreatePoly(const SdrDragStat& rDrag) const
+{
+    tools::Rectangle aRect1;
+    rDrag.TakeCreateRect(aRect1);
+    aRect1.Justify();
+
+    basegfx::B2DPolyPolygon aRetval;
+    const basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(aRect1);
+    aRetval.append(basegfx::utils::createPolygonFromRect(aRange));
+    return aRetval;
+}
+
+PointerStyle SdrTextObj::GetCreatePointer() const
+{
+    if (IsTextFrame()) return PointerStyle::DrawText;
+    return PointerStyle::Cross;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotxed.cxx b/svx/source/svdraw/svdotxed.cxx
new file mode 100644
index 000000000..d108d1774
--- /dev/null
+++ b/svx/source/svdraw/svdotxed.cxx
@@ -0,0 +1,360 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdotext.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdoutl.hxx>
+#include <editeng/editdata.hxx>
+#include <editeng/outliner.hxx>
+#include <editeng/outlobj.hxx>
+#include <editeng/editstat.hxx>
+#include <svl/itemset.hxx>
+#include <editeng/eeitem.hxx>
+#include <svx/sdtfchim.hxx>
+#include <textchain.hxx>
+
+
+bool SdrTextObj::HasTextEdit() const
+{
+    // linked text objects may be changed (no automatic reload)
+    return true;
+}
+
+bool SdrTextObj::BegTextEdit(SdrOutliner& rOutl)
+{
+    if (pEdtOutl!=nullptr) return false; // Textedit might already run in another View!
+    pEdtOutl=&rOutl;
+
+    mbInEditMode = true;
+
+    OutlinerMode nOutlinerMode = OutlinerMode::OutlineObject;
+    if ( !IsOutlText() )
+        nOutlinerMode = OutlinerMode::TextObject;
+    rOutl.Init( nOutlinerMode );
+    rOutl.SetRefDevice(getSdrModelFromSdrObject().GetRefDevice());
+
+    bool bFitToSize(IsFitToSize());
+    bool bContourFrame=IsContourTextFrame();
+    ImpSetTextEditParams();
+
+    if (!bContourFrame) {
+        EEControlBits nStat=rOutl.GetControlWord();
+        nStat|=EEControlBits::AUTOPAGESIZE;
+        if (bFitToSize || IsAutoFit())
+            nStat|=EEControlBits::STRETCHING;
+        else
+            nStat&=~EEControlBits::STRETCHING;
+        rOutl.SetControlWord(nStat);
+    }
+
+    // disable AUTOPAGESIZE if IsChainable (might be required for overflow check)
+    if ( IsChainable() ) {
+        EEControlBits nStat1=rOutl.GetControlWord();
+        nStat1 &=~EEControlBits::AUTOPAGESIZE;
+        rOutl.SetControlWord(nStat1);
+    }
+
+
+    OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject();
+    if(pOutlinerParaObject!=nullptr)
+    {
+        rOutl.SetText(*GetOutlinerParaObject());
+        rOutl.SetFixedCellHeight(GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT).GetValue());
+    }
+
+    // if necessary, set frame attributes for the first (new) paragraph of the
+    // outliner
+    if( !HasTextImpl( &rOutl ) )
+    {
+        // Outliner has no text so we must set some
+        // empty text so the outliner initialise itself
+        rOutl.SetText( "", rOutl.GetParagraph( 0 ) );
+
+        if(GetStyleSheet())
+            rOutl.SetStyleSheet( 0, GetStyleSheet());
+
+        // When setting the "hard" attributes for first paragraph, the Parent
+        // pOutlAttr (i. e. the template) has to be removed temporarily. Else,
+        // at SetParaAttribs(), all attributes contained in the parent become
+        // attributed hard to the paragraph.
+        const SfxItemSet& rSet = GetObjectItemSet();
+        SfxItemSet aFilteredSet(*rSet.GetPool(), svl::Items<EE_ITEMS_START, EE_ITEMS_END>{});
+        aFilteredSet.Put(rSet);
+        rOutl.SetParaAttribs(0, aFilteredSet);
+    }
+    if (bFitToSize)
+    {
+        tools::Rectangle aAnchorRect;
+        tools::Rectangle aTextRect;
+        TakeTextRect(rOutl, aTextRect, false,
+            &aAnchorRect);
+        Fraction aFitXCorrection(1,1);
+        ImpSetCharStretching(rOutl,aTextRect.GetSize(),aAnchorRect.GetSize(),aFitXCorrection);
+    }
+    else if (IsAutoFit())
+    {
+        ImpAutoFitText(rOutl);
+    }
+
+    if(pOutlinerParaObject)
+    {
+        if(aGeo.nRotationAngle || IsFontwork())
+        {
+            // only repaint here, no real objectchange
+            BroadcastObjectChange();
+        }
+    }
+
+    rOutl.UpdateFields();
+    rOutl.ClearModifyFlag();
+
+    return true;
+}
+
+void SdrTextObj::TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, tools::Rectangle* pViewInit, tools::Rectangle* pViewMin) const
+{
+    bool bFitToSize(IsFitToSize());
+    Size aPaperMin,aPaperMax;
+    tools::Rectangle aViewInit;
+    TakeTextAnchorRect(aViewInit);
+    if (aGeo.nRotationAngle!=0) {
+        Point aCenter(aViewInit.Center());
+        aCenter-=aViewInit.TopLeft();
+        Point aCenter0(aCenter);
+        RotatePoint(aCenter,Point(),aGeo.nSin,aGeo.nCos);
+        aCenter-=aCenter0;
+        aViewInit.Move(aCenter.X(),aCenter.Y());
+    }
+    Size aAnkSiz(aViewInit.GetSize());
+    aAnkSiz.AdjustWidth( -1 ); aAnkSiz.AdjustHeight( -1 ); // because GetSize() adds 1
+    Size aMaxSiz(1000000,1000000);
+    Size aTmpSiz(getSdrModelFromSdrObject().GetMaxObjSize());
+    if (aTmpSiz.Width()!=0) aMaxSiz.setWidth(aTmpSiz.Width() );
+    if (aTmpSiz.Height()!=0) aMaxSiz.setHeight(aTmpSiz.Height() );
+
+    // Done earlier since used in else tree below
+    SdrTextHorzAdjust eHAdj(GetTextHorizontalAdjust());
+    SdrTextVertAdjust eVAdj(GetTextVerticalAdjust());
+
+    if(IsTextFrame())
+    {
+        long nMinWdt=GetMinTextFrameWidth();
+        long nMinHgt=GetMinTextFrameHeight();
+        long nMaxWdt=GetMaxTextFrameWidth();
+        long nMaxHgt=GetMaxTextFrameHeight();
+        if (nMinWdt<1) nMinWdt=1;
+        if (nMinHgt<1) nMinHgt=1;
+        if (!bFitToSize) {
+            if (nMaxWdt==0 || nMaxWdt>aMaxSiz.Width())  nMaxWdt=aMaxSiz.Width();
+            if (nMaxHgt==0 || nMaxHgt>aMaxSiz.Height()) nMaxHgt=aMaxSiz.Height();
+
+            if (!IsAutoGrowWidth() )
+            {
+                nMinWdt = aAnkSiz.Width();
+                nMaxWdt = nMinWdt;
+            }
+
+            if (!IsAutoGrowHeight())
+            {
+                nMinHgt = aAnkSiz.Height();
+                nMaxHgt = nMinHgt;
+            }
+
+            SdrTextAniKind      eAniKind=GetTextAniKind();
+            SdrTextAniDirection eAniDirection=GetTextAniDirection();
+
+            bool bInEditMode = IsInEditMode();
+
+            if (!bInEditMode && (eAniKind==SdrTextAniKind::Scroll || eAniKind==SdrTextAniKind::Alternate || eAniKind==SdrTextAniKind::Slide))
+            {
+                // ticker text uses an unlimited paper size
+                if (eAniDirection==SdrTextAniDirection::Left || eAniDirection==SdrTextAniDirection::Right) nMaxWdt=1000000;
+                if (eAniDirection==SdrTextAniDirection::Up || eAniDirection==SdrTextAniDirection::Down) nMaxHgt=1000000;
+            }
+
+            bool bChainedFrame = IsChainable();
+            // Might be required for overflow check working: do limit height to frame if box is chainable.
+            if (!bChainedFrame) {
+                // #i119885# Do not limit/force height to geometrical frame (vice versa for vertical writing)
+                if(IsVerticalWriting())
+                {
+                    nMaxWdt = 1000000;
+                }
+                else
+                {
+                    nMaxHgt = 1000000;
+                }
+            }
+
+            aPaperMax.setWidth(nMaxWdt );
+            aPaperMax.setHeight(nMaxHgt );
+        }
+        else
+        {
+            aPaperMax=aMaxSiz;
+        }
+        aPaperMin.setWidth(nMinWdt );
+        aPaperMin.setHeight(nMinHgt );
+    }
+    else
+    {
+        // aPaperMin needs to be set to object's size if full width is activated
+        // for hor or ver writing respectively
+        if((SDRTEXTHORZADJUST_BLOCK == eHAdj && !IsVerticalWriting())
+            || (SDRTEXTVERTADJUST_BLOCK == eVAdj && IsVerticalWriting()))
+        {
+            aPaperMin = aAnkSiz;
+        }
+
+        aPaperMax=aMaxSiz;
+    }
+
+    if (pViewMin!=nullptr) {
+        *pViewMin=aViewInit;
+
+        long nXFree=aAnkSiz.Width()-aPaperMin.Width();
+        if (eHAdj==SDRTEXTHORZADJUST_LEFT) pViewMin->AdjustRight( -nXFree );
+        else if (eHAdj==SDRTEXTHORZADJUST_RIGHT) pViewMin->AdjustLeft(nXFree );
+        else { pViewMin->AdjustLeft(nXFree/2 ); pViewMin->SetRight(pViewMin->Left()+aPaperMin.Width() ); }
+
+        long nYFree=aAnkSiz.Height()-aPaperMin.Height();
+        if (eVAdj==SDRTEXTVERTADJUST_TOP) pViewMin->AdjustBottom( -nYFree );
+        else if (eVAdj==SDRTEXTVERTADJUST_BOTTOM) pViewMin->AdjustTop(nYFree );
+        else { pViewMin->AdjustTop(nYFree/2 ); pViewMin->SetBottom(pViewMin->Top()+aPaperMin.Height() ); }
+    }
+
+    // PaperSize should grow automatically in most cases
+    if(IsVerticalWriting())
+        aPaperMin.setWidth( 0 );
+    else
+        aPaperMin.setHeight( 0 );
+
+    if(eHAdj!=SDRTEXTHORZADJUST_BLOCK || bFitToSize) {
+        aPaperMin.setWidth(0 );
+    }
+
+    // For complete vertical adjustment support, set paper min height to 0, here.
+    if(SDRTEXTVERTADJUST_BLOCK != eVAdj || bFitToSize)
+    {
+        aPaperMin.setHeight( 0 );
+    }
+
+    if (pPaperMin!=nullptr) *pPaperMin=aPaperMin;
+    if (pPaperMax!=nullptr) *pPaperMax=aPaperMax;
+    if (pViewInit!=nullptr) *pViewInit=aViewInit;
+}
+
+void SdrTextObj::EndTextEdit(SdrOutliner& rOutl)
+{
+    if(rOutl.IsModified())
+    {
+
+        // to make the gray field background vanish again
+        rOutl.UpdateFields();
+
+        std::unique_ptr<OutlinerParaObject> pNewText = rOutl.CreateParaObject( 0, rOutl.GetParagraphCount() );
+
+        // need to end edit mode early since SetOutlinerParaObject already
+        // uses GetCurrentBoundRect() which needs to take the text into account
+        // to work correct
+        mbInEditMode = false;
+
+        // We don't want broadcasting if we are merely trying to move to next box (this prevents infinite loops)
+        if (IsChainable() && GetTextChain()->GetSwitchingToNextBox(this)) {
+            GetTextChain()->SetSwitchingToNextBox(this, false);
+            if( getActiveText() )
+            {
+                getActiveText()->SetOutlinerParaObject( std::move(pNewText) );
+            }
+        } else { // If we are not doing in-chaining switching just set the ParaObject
+            SetOutlinerParaObject(std::move(pNewText));
+        }
+    }
+
+    /* Chaining-related code */
+    rOutl.ClearOverflowingParaNum();
+
+    pEdtOutl = nullptr;
+    rOutl.Clear();
+    EEControlBits nStat = rOutl.GetControlWord();
+    nStat &= ~EEControlBits::AUTOPAGESIZE;
+    rOutl.SetControlWord(nStat);
+
+    mbInEditMode = false;
+}
+
+EEAnchorMode SdrTextObj::GetOutlinerViewAnchorMode() const
+{
+    SdrTextHorzAdjust eH=GetTextHorizontalAdjust();
+    SdrTextVertAdjust eV=GetTextVerticalAdjust();
+    EEAnchorMode eRet=EEAnchorMode::TopLeft;
+    if (IsContourTextFrame()) return eRet;
+    if (eH==SDRTEXTHORZADJUST_LEFT) {
+        if (eV==SDRTEXTVERTADJUST_TOP) {
+            eRet=EEAnchorMode::TopLeft;
+        } else if (eV==SDRTEXTVERTADJUST_BOTTOM) {
+            eRet=EEAnchorMode::BottomLeft;
+        } else {
+            eRet=EEAnchorMode::VCenterLeft;
+        }
+    } else if (eH==SDRTEXTHORZADJUST_RIGHT) {
+        if (eV==SDRTEXTVERTADJUST_TOP) {
+            eRet=EEAnchorMode::TopRight;
+        } else if (eV==SDRTEXTVERTADJUST_BOTTOM) {
+            eRet=EEAnchorMode::BottomRight;
+        } else {
+            eRet=EEAnchorMode::VCenterRight;
+        }
+    } else {
+        if (eV==SDRTEXTVERTADJUST_TOP) {
+            eRet=EEAnchorMode::TopHCenter;
+        } else if (eV==SDRTEXTVERTADJUST_BOTTOM) {
+            eRet=EEAnchorMode::BottomHCenter;
+        } else {
+            eRet=EEAnchorMode::VCenterHCenter;
+        }
+    }
+    return eRet;
+}
+
+void SdrTextObj::ImpSetTextEditParams() const
+{
+    if (pEdtOutl==nullptr)
+        return;
+
+    bool bUpdBuf=pEdtOutl->GetUpdateMode();
+    if (bUpdBuf) pEdtOutl->SetUpdateMode(false);
+    Size aPaperMin;
+    Size aPaperMax;
+    tools::Rectangle aEditArea;
+    TakeTextEditArea(&aPaperMin,&aPaperMax,&aEditArea,nullptr);
+    bool bContourFrame=IsContourTextFrame();
+    pEdtOutl->SetMinAutoPaperSize(aPaperMin);
+    pEdtOutl->SetMaxAutoPaperSize(aPaperMax);
+    pEdtOutl->SetPaperSize(Size());
+    if (bContourFrame) {
+        tools::Rectangle aAnchorRect;
+        TakeTextAnchorRect(aAnchorRect);
+        ImpSetContourPolygon(*pEdtOutl,aAnchorRect, true);
+    }
+    if (bUpdBuf) pEdtOutl->SetUpdateMode(true);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotxfl.cxx b/svx/source/svdraw/svdotxfl.cxx
new file mode 100644
index 000000000..e2c7c7515
--- /dev/null
+++ b/svx/source/svdraw/svdotxfl.cxx
@@ -0,0 +1,28 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdotext.hxx>
+
+bool SdrTextObj::CalcFieldValue(const SvxFieldItem& /*rField*/, sal_Int32 /*nPara*/, sal_uInt16 /*nPos*/,
+    bool /*bEdit*/, std::optional<Color>& /*rpTxtColor*/, std::optional<Color>& /*rpFldColor*/, OUString& /*rRet*/) const
+{
+    return false;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotxln.cxx b/svx/source/svdraw/svdotxln.cxx
new file mode 100644
index 000000000..01055b45a
--- /dev/null
+++ b/svx/source/svdraw/svdotxln.cxx
@@ -0,0 +1,277 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <comphelper/processfactory.hxx>
+#include <osl/file.hxx>
+#include <osl/thread.h>
+#include <unotools/ucbstreamhelper.hxx>
+#include <ucbhelper/content.hxx>
+#include <unotools/datetime.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdmodel.hxx>
+#include <editeng/editdata.hxx>
+#include <sfx2/lnkbase.hxx>
+#include <sfx2/linkmgr.hxx>
+#include <tools/urlobj.hxx>
+#include <tools/debug.hxx>
+#include <tools/tenccvt.hxx>
+#include <memory>
+
+class ImpSdrObjTextLink: public ::sfx2::SvBaseLink
+{
+    SdrTextObj*                 pSdrObj;
+
+public:
+    explicit ImpSdrObjTextLink( SdrTextObj* pObj1 )
+        : ::sfx2::SvBaseLink( ::SfxLinkUpdateMode::ONCALL, SotClipboardFormatId::SIMPLE_FILE ),
+            pSdrObj( pObj1 )
+    {}
+
+    virtual void Closed() override;
+    virtual ::sfx2::SvBaseLink::UpdateResult DataChanged(
+        const OUString& rMimeType, const css::uno::Any & rValue ) override;
+};
+
+void ImpSdrObjTextLink::Closed()
+{
+    if (pSdrObj )
+    {
+        // set pLink of the object to NULL, because we are destroying the link instance now
+        ImpSdrObjTextLinkUserData* pData=pSdrObj->GetLinkUserData();
+        if (pData!=nullptr) pData->pLink=nullptr;
+        pSdrObj->ReleaseTextLink();
+    }
+    SvBaseLink::Closed();
+}
+
+
+::sfx2::SvBaseLink::UpdateResult ImpSdrObjTextLink::DataChanged(
+    const OUString& /*rMimeType*/, const css::uno::Any & /*rValue */)
+{
+    bool bForceReload = false;
+    SdrModel* pModel(pSdrObj ? &pSdrObj->getSdrModelFromSdrObject() : nullptr);
+    sfx2::LinkManager* pLinkManager(pModel ? pModel->GetLinkManager() : nullptr);
+
+    if( pLinkManager )
+    {
+        ImpSdrObjTextLinkUserData* pData=pSdrObj->GetLinkUserData();
+        if( pData )
+        {
+            OUString aFile;
+            OUString aFilter;
+            sfx2::LinkManager::GetDisplayNames( this, nullptr,&aFile, nullptr, &aFilter );
+
+            if( pData->aFileName != aFile ||
+                pData->aFilterName != aFilter )
+            {
+                pData->aFileName = aFile;
+                pData->aFilterName = aFilter;
+                pSdrObj->SetChanged();
+                bForceReload = true;
+            }
+        }
+    }
+    if (pSdrObj )
+        pSdrObj->ReloadLinkedText( bForceReload );
+
+    return SUCCESS;
+}
+
+
+ImpSdrObjTextLinkUserData::ImpSdrObjTextLinkUserData():
+    SdrObjUserData(SdrInventor::Default,SDRUSERDATA_OBJTEXTLINK),
+    aFileDate0( DateTime::EMPTY ),
+    eCharSet(RTL_TEXTENCODING_DONTKNOW)
+{
+}
+
+ImpSdrObjTextLinkUserData::~ImpSdrObjTextLinkUserData()
+{
+}
+
+std::unique_ptr<SdrObjUserData> ImpSdrObjTextLinkUserData::Clone(SdrObject* ) const
+{
+    ImpSdrObjTextLinkUserData* pData=new ImpSdrObjTextLinkUserData;
+    pData->aFileName  =aFileName;
+    pData->aFilterName=aFilterName;
+    pData->aFileDate0 =aFileDate0;
+    pData->eCharSet   =eCharSet;
+    pData->pLink=nullptr;
+    return std::unique_ptr<SdrObjUserData>(pData);
+}
+
+
+void SdrTextObj::SetTextLink(const OUString& rFileName, const OUString& rFilterName)
+{
+    rtl_TextEncoding eCharSet = osl_getThreadTextEncoding();
+
+    ImpSdrObjTextLinkUserData* pData=GetLinkUserData();
+    if (pData!=nullptr) {
+        ReleaseTextLink();
+    }
+    pData=new ImpSdrObjTextLinkUserData;
+    pData->aFileName=rFileName;
+    pData->aFilterName=rFilterName;
+    pData->eCharSet=eCharSet;
+    AppendUserData(std::unique_ptr<SdrObjUserData>(pData));
+    ImpRegisterLink();
+}
+
+void SdrTextObj::ReleaseTextLink()
+{
+    ImpDeregisterLink();
+    sal_uInt16 nCount=GetUserDataCount();
+    for (sal_uInt16 nNum=nCount; nNum>0;) {
+        nNum--;
+        SdrObjUserData* pData=GetUserData(nNum);
+        if (pData->GetInventor()==SdrInventor::Default && pData->GetId()==SDRUSERDATA_OBJTEXTLINK) {
+            DeleteUserData(nNum);
+        }
+    }
+}
+
+bool SdrTextObj::ReloadLinkedText( bool bForceLoad)
+{
+    ImpSdrObjTextLinkUserData*  pData = GetLinkUserData();
+    bool                        bRet = true;
+
+    if( pData )
+    {
+        DateTime                    aFileDT( DateTime::EMPTY );
+        bool                        bExists = true;
+
+        try
+        {
+            INetURLObject aURL( pData->aFileName );
+            DBG_ASSERT( aURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
+
+            ::ucbhelper::Content aCnt( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), css::uno::Reference< css::ucb::XCommandEnvironment >(), comphelper::getProcessComponentContext() );
+            css::uno::Any aAny( aCnt.getPropertyValue("DateModified") );
+            css::util::DateTime aDateTime;
+
+            aAny >>= aDateTime;
+            ::utl::typeConvert( aDateTime, aFileDT );
+        }
+        catch( ... )
+        {
+            bExists = false;
+        }
+
+        if( bExists )
+        {
+            bool bLoad = false;
+            if( bForceLoad )
+                bLoad = true;
+            else
+                bLoad = ( aFileDT > pData->aFileDate0 );
+
+            if( bLoad )
+            {
+                bRet = LoadText( pData->aFileName, pData->eCharSet );
+            }
+
+            pData->aFileDate0 = aFileDT;
+        }
+    }
+
+    return bRet;
+}
+
+bool SdrTextObj::LoadText(const OUString& rFileName, rtl_TextEncoding eCharSet)
+{
+    INetURLObject   aFileURL( rFileName );
+    bool            bRet = false;
+
+    if( aFileURL.GetProtocol() == INetProtocol::NotValid )
+    {
+        OUString aFileURLStr;
+
+        if( osl::FileBase::getFileURLFromSystemPath( rFileName, aFileURLStr ) == osl::FileBase::E_None )
+            aFileURL = INetURLObject( aFileURLStr );
+        else
+            aFileURL.SetSmartURL( rFileName );
+    }
+
+    DBG_ASSERT( aFileURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
+
+    std::unique_ptr<SvStream> pIStm(::utl::UcbStreamHelper::CreateStream( aFileURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), StreamMode::READ ));
+
+    if( pIStm )
+    {
+        pIStm->SetStreamCharSet(GetSOLoadTextEncoding(eCharSet));
+
+        char cRTF[5];
+        cRTF[4] = 0;
+        pIStm->ReadBytes(cRTF, 5);
+
+        bool bRTF = cRTF[0] == '{' && cRTF[1] == '\\' && cRTF[2] == 'r' && cRTF[3] == 't' && cRTF[4] == 'f';
+
+        pIStm->Seek(0);
+
+        if( !pIStm->GetError() )
+        {
+            SetText( *pIStm, aFileURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), bRTF ? EETextFormat::Rtf : EETextFormat::Text );
+            bRet = true;
+        }
+    }
+
+    return bRet;
+}
+
+ImpSdrObjTextLinkUserData* SdrTextObj::GetLinkUserData() const
+{
+    sal_uInt16 nCount=GetUserDataCount();
+    for (sal_uInt16 nNum=nCount; nNum>0;) {
+        nNum--;
+        SdrObjUserData * pData=GetUserData(nNum);
+        if (pData->GetInventor() == SdrInventor::Default
+            && pData->GetId() == SDRUSERDATA_OBJTEXTLINK)
+        {
+            return static_cast<ImpSdrObjTextLinkUserData *>(pData);
+        }
+    }
+    return nullptr;
+}
+
+void SdrTextObj::ImpRegisterLink()
+{
+    ImpSdrObjTextLinkUserData* pData=GetLinkUserData();
+    sfx2::LinkManager* pLinkManager(getSdrModelFromSdrObject().GetLinkManager());
+    if (pLinkManager!=nullptr && pData!=nullptr && pData->pLink==nullptr) { // don't register twice
+        pData->pLink = new ImpSdrObjTextLink(this);
+        pLinkManager->InsertFileLink(*pData->pLink,sfx2::SvBaseLinkObjectType::ClientFile,pData->aFileName,
+                                     !pData->aFilterName.isEmpty() ?
+                                      &pData->aFilterName : nullptr);
+    }
+}
+
+void SdrTextObj::ImpDeregisterLink()
+{
+    ImpSdrObjTextLinkUserData* pData=GetLinkUserData();
+    sfx2::LinkManager* pLinkManager(getSdrModelFromSdrObject().GetLinkManager());
+    if (pLinkManager!=nullptr && pData!=nullptr && pData->pLink!=nullptr) { // don't register twice
+        // when doing Remove, *pLink is deleted implicitly
+        pLinkManager->Remove( pData->pLink.get() );
+        pData->pLink=nullptr;
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdotxtr.cxx b/svx/source/svdraw/svdotxtr.cxx
new file mode 100644
index 000000000..4478324b4
--- /dev/null
+++ b/svx/source/svdraw/svdotxtr.cxx
@@ -0,0 +1,502 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdotext.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdmodel.hxx>
+#include <sdr/properties/itemsettools.hxx>
+#include <svx/sdr/properties/properties.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <svl/itemset.hxx>
+#include <drawinglayer/processor2d/textaspolygonextractor2d.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/sdshitm.hxx>
+
+using namespace com::sun::star;
+
+void SdrTextObj::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    if (aGeo.nRotationAngle!=0 || aGeo.nShearAngle!=0)
+    {
+        // Either the rotation or shear angle exists.
+        tools::Rectangle aSR0(GetSnapRect());
+        long nWdt0=aSR0.Right()-aSR0.Left();
+        long nHgt0=aSR0.Bottom()-aSR0.Top();
+        long nWdt1=rRect.Right()-rRect.Left();
+        long nHgt1=rRect.Bottom()-rRect.Top();
+        SdrTextObj::NbcResize(maSnapRect.TopLeft(),Fraction(nWdt1,nWdt0),Fraction(nHgt1,nHgt0));
+        SdrTextObj::NbcMove(Size(rRect.Left()-aSR0.Left(),rRect.Top()-aSR0.Top()));
+    }
+    else
+    {
+        // No rotation or shear.
+
+        maRect = rRect;
+        ImpJustifyRect(maRect);
+
+        AdaptTextMinSize();
+
+        ImpCheckShear();
+        SetRectsDirty();
+    }
+}
+
+const tools::Rectangle& SdrTextObj::GetLogicRect() const
+{
+    return maRect;
+}
+
+void SdrTextObj::NbcSetLogicRect(const tools::Rectangle& rRect)
+{
+    maRect = rRect;
+    ImpJustifyRect(maRect);
+
+    AdaptTextMinSize();
+
+    SetRectsDirty();
+}
+
+long SdrTextObj::GetRotateAngle() const
+{
+    return aGeo.nRotationAngle;
+}
+
+long SdrTextObj::GetShearAngle(bool /*bVertical*/) const
+{
+    return aGeo.nShearAngle;
+}
+
+void SdrTextObj::NbcMove(const Size& rSiz)
+{
+    maRect.Move(rSiz);
+    aOutRect.Move(rSiz);
+    maSnapRect.Move(rSiz);
+    SetRectsDirty(true);
+}
+
+void SdrTextObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    bool bNotSheared=aGeo.nShearAngle==0;
+    bool bRotate90=bNotSheared && aGeo.nRotationAngle % 9000 ==0;
+    bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0);
+    bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0);
+    if (bXMirr || bYMirr) {
+        Point aRef1(GetSnapRect().Center());
+        if (bXMirr) {
+            Point aRef2(aRef1);
+            aRef2.AdjustY( 1 );
+            NbcMirrorGluePoints(aRef1,aRef2);
+        }
+        if (bYMirr) {
+            Point aRef2(aRef1);
+            aRef2.AdjustX( 1 );
+            NbcMirrorGluePoints(aRef1,aRef2);
+        }
+    }
+
+    if (aGeo.nRotationAngle==0 && aGeo.nShearAngle==0) {
+        ResizeRect(maRect,rRef,xFact,yFact);
+        if (bYMirr) {
+            maRect.Justify();
+            maRect.Move(maRect.Right()-maRect.Left(),maRect.Bottom()-maRect.Top());
+            aGeo.nRotationAngle=18000;
+            aGeo.RecalcSinCos();
+        }
+    }
+    else
+    {
+        tools::Polygon aPol(Rect2Poly(maRect,aGeo));
+
+        for(sal_uInt16 a(0); a < aPol.GetSize(); a++)
+        {
+             ResizePoint(aPol[a], rRef, xFact, yFact);
+        }
+
+        if(bXMirr != bYMirr)
+        {
+            // turn polygon and move it a little
+            tools::Polygon aPol0(aPol);
+
+            aPol[0] = aPol0[1];
+            aPol[1] = aPol0[0];
+            aPol[2] = aPol0[3];
+            aPol[3] = aPol0[2];
+            aPol[4] = aPol0[1];
+        }
+
+        Poly2Rect(aPol, maRect, aGeo);
+    }
+
+    if (bRotate90) {
+        bool bRota90=aGeo.nRotationAngle % 9000 ==0;
+        if (!bRota90) { // there's seems to be a rounding error occurring: correct it
+            long a=NormAngle36000(aGeo.nRotationAngle);
+            if (a<4500) a=0;
+            else if (a<13500) a=9000;
+            else if (a<22500) a=18000;
+            else if (a<31500) a=27000;
+            else a=0;
+            aGeo.nRotationAngle=a;
+            aGeo.RecalcSinCos();
+        }
+        if (bNotSheared!=(aGeo.nShearAngle==0)) { // correct a rounding error occurring with Shear
+            aGeo.nShearAngle=0;
+            aGeo.RecalcTan();
+        }
+    }
+
+    ImpJustifyRect(maRect);
+
+    AdaptTextMinSize();
+
+    if(bTextFrame && !getSdrModelFromSdrObject().IsPasteResize())
+    {
+        NbcAdjustTextFrameWidthAndHeight();
+    }
+
+    ImpCheckShear();
+    SetRectsDirty();
+}
+
+void SdrTextObj::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    SetGlueReallyAbsolute(true);
+    long dx=maRect.Right()-maRect.Left();
+    long dy=maRect.Bottom()-maRect.Top();
+    Point aP(maRect.TopLeft());
+    RotatePoint(aP,rRef,sn,cs);
+    maRect.SetLeft(aP.X() );
+    maRect.SetTop(aP.Y() );
+    maRect.SetRight(maRect.Left()+dx );
+    maRect.SetBottom(maRect.Top()+dy );
+    if (aGeo.nRotationAngle==0) {
+        aGeo.nRotationAngle=NormAngle36000(nAngle);
+        aGeo.nSin=sn;
+        aGeo.nCos=cs;
+    } else {
+        aGeo.nRotationAngle=NormAngle36000(aGeo.nRotationAngle+nAngle);
+        aGeo.RecalcSinCos();
+    }
+    SetRectsDirty();
+    NbcRotateGluePoints(rRef,nAngle,sn,cs);
+    SetGlueReallyAbsolute(false);
+}
+
+void SdrTextObj::NbcShear(const Point& rRef, long /*nAngle*/, double tn, bool bVShear)
+{
+    SetGlueReallyAbsolute(true);
+
+    // when this is a SdrPathObj, aRect may be uninitialized
+    tools::Polygon aPol(Rect2Poly(maRect.IsEmpty() ? GetSnapRect() : maRect, aGeo));
+
+    sal_uInt16 nPointCount=aPol.GetSize();
+    for (sal_uInt16 i=0; i<nPointCount; i++) {
+         ShearPoint(aPol[i],rRef,tn,bVShear);
+    }
+    Poly2Rect(aPol,maRect,aGeo);
+    ImpJustifyRect(maRect);
+    if (bTextFrame) {
+        NbcAdjustTextFrameWidthAndHeight();
+    }
+    ImpCheckShear();
+    SetRectsDirty();
+    NbcShearGluePoints(rRef,tn,bVShear);
+    SetGlueReallyAbsolute(false);
+}
+
+void SdrTextObj::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    SetGlueReallyAbsolute(true);
+    bool bNotSheared=aGeo.nShearAngle==0;
+    bool bRotate90 = false;
+    if (bNotSheared &&
+        (rRef1.X()==rRef2.X() || rRef1.Y()==rRef2.Y() ||
+         std::abs(rRef1.X()-rRef2.X())==std::abs(rRef1.Y()-rRef2.Y()))) {
+        bRotate90=aGeo.nRotationAngle % 9000 ==0;
+    }
+    tools::Polygon aPol(Rect2Poly(maRect,aGeo));
+    sal_uInt16 i;
+    sal_uInt16 nPointCount=aPol.GetSize();
+    for (i=0; i<nPointCount; i++) {
+         MirrorPoint(aPol[i],rRef1,rRef2);
+    }
+    // turn polygon and move it a little
+    tools::Polygon aPol0(aPol);
+    aPol[0]=aPol0[1];
+    aPol[1]=aPol0[0];
+    aPol[2]=aPol0[3];
+    aPol[3]=aPol0[2];
+    aPol[4]=aPol0[1];
+    Poly2Rect(aPol,maRect,aGeo);
+
+    if (bRotate90) {
+        bool bRota90=aGeo.nRotationAngle % 9000 ==0;
+        if (bRotate90 && !bRota90) { // there's seems to be a rounding error occurring: correct it
+            long a=NormAngle36000(aGeo.nRotationAngle);
+            if (a<4500) a=0;
+            else if (a<13500) a=9000;
+            else if (a<22500) a=18000;
+            else if (a<31500) a=27000;
+            else a=0;
+            aGeo.nRotationAngle=a;
+            aGeo.RecalcSinCos();
+        }
+    }
+    if (bNotSheared!=(aGeo.nShearAngle==0)) { // correct a rounding error occurring with Shear
+        aGeo.nShearAngle=0;
+        aGeo.RecalcTan();
+    }
+
+    ImpJustifyRect(maRect);
+    if (bTextFrame) {
+        NbcAdjustTextFrameWidthAndHeight();
+    }
+    ImpCheckShear();
+    SetRectsDirty();
+    NbcMirrorGluePoints(rRef1,rRef2);
+    SetGlueReallyAbsolute(false);
+}
+
+
+SdrObjectUniquePtr SdrTextObj::ImpConvertContainedTextToSdrPathObjs(bool bToPoly) const
+{
+    SdrObjectUniquePtr pRetval;
+
+    if(!ImpCanConvTextToCurve())
+    {
+        // suppress HelpTexts from PresObj's
+        return nullptr;
+    }
+
+    // get primitives
+    const drawinglayer::primitive2d::Primitive2DContainer & xSequence(GetViewContact().getViewIndependentPrimitive2DContainer());
+
+    if(!xSequence.empty())
+    {
+        // create an extractor with neutral ViewInformation
+        const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+        drawinglayer::processor2d::TextAsPolygonExtractor2D aExtractor(aViewInformation2D);
+
+        // extract text as polygons
+        aExtractor.process(xSequence);
+
+        // get results
+        const drawinglayer::processor2d::TextAsPolygonDataNodeVector& rResult = aExtractor.getTarget();
+        const sal_uInt32 nResultCount(rResult.size());
+
+        if(nResultCount)
+        {
+            // prepare own target
+            SdrObjGroup* pGroup = new SdrObjGroup(getSdrModelFromSdrObject());
+            SdrObjList* pObjectList = pGroup->GetSubList();
+
+            // process results
+            for(sal_uInt32 a(0); a < nResultCount; a++)
+            {
+                const drawinglayer::processor2d::TextAsPolygonDataNode& rCandidate = rResult[a];
+                basegfx::B2DPolyPolygon aPolyPolygon(rCandidate.getB2DPolyPolygon());
+
+                if(aPolyPolygon.count())
+                {
+                    // take care of wanted polygon type
+                    if(bToPoly)
+                    {
+                        if(aPolyPolygon.areControlPointsUsed())
+                        {
+                            aPolyPolygon = basegfx::utils::adaptiveSubdivideByAngle(aPolyPolygon);
+                        }
+                    }
+                    else
+                    {
+                        if(!aPolyPolygon.areControlPointsUsed())
+                        {
+                            aPolyPolygon = basegfx::utils::expandToCurve(aPolyPolygon);
+                        }
+                    }
+
+                    // create ItemSet with object attributes
+                    SfxItemSet aAttributeSet(GetObjectItemSet());
+                    SdrPathObj* pPathObj = nullptr;
+
+                    // always clear objectshadow; this is included in the extraction
+                    aAttributeSet.Put(makeSdrShadowItem(false));
+
+                    if(rCandidate.getIsFilled())
+                    {
+                        // set needed items
+                        aAttributeSet.Put(XFillColorItem(OUString(), Color(rCandidate.getBColor())));
+                        aAttributeSet.Put(XLineStyleItem(drawing::LineStyle_NONE));
+                        aAttributeSet.Put(XFillStyleItem(drawing::FillStyle_SOLID));
+
+                        // create filled SdrPathObj
+                        pPathObj = new SdrPathObj(
+                            getSdrModelFromSdrObject(),
+                            OBJ_PATHFILL,
+                            aPolyPolygon);
+                    }
+                    else
+                    {
+                        // set needed items
+                        aAttributeSet.Put(XLineColorItem(OUString(), Color(rCandidate.getBColor())));
+                        aAttributeSet.Put(XLineStyleItem(drawing::LineStyle_SOLID));
+                        aAttributeSet.Put(XLineWidthItem(0));
+                        aAttributeSet.Put(XFillStyleItem(drawing::FillStyle_NONE));
+
+                        // create line SdrPathObj
+                        pPathObj = new SdrPathObj(
+                            getSdrModelFromSdrObject(),
+                            OBJ_PATHLINE,
+                            aPolyPolygon);
+                    }
+
+                    // copy basic information from original
+                    pPathObj->ImpSetAnchorPos(GetAnchorPos());
+                    pPathObj->NbcSetLayer(GetLayer());
+                    pPathObj->NbcSetStyleSheet(GetStyleSheet(), true);
+
+                    // apply prepared ItemSet and add to target
+                    pPathObj->SetMergedItemSet(aAttributeSet);
+                    pObjectList->InsertObject(pPathObj);
+                }
+            }
+
+            // postprocess; if no result and/or only one object, simplify
+            if(!pObjectList->GetObjCount())
+            {
+                // always use SdrObject::Free(...) for SdrObjects (!)
+                SdrObject* pTemp(pGroup);
+                SdrObject::Free(pTemp);
+            }
+            else if(1 == pObjectList->GetObjCount())
+            {
+                pRetval.reset(pObjectList->RemoveObject(0));
+
+                // always use SdrObject::Free(...) for SdrObjects (!)
+                SdrObject* pTemp(pGroup);
+                SdrObject::Free(pTemp);
+            }
+            else
+            {
+                pRetval.reset(pGroup);
+            }
+        }
+    }
+
+    return pRetval;
+}
+
+
+SdrObjectUniquePtr SdrTextObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
+{
+    if(bAddText)
+    {
+        return ImpConvertContainedTextToSdrPathObjs(!bBezier);
+    }
+
+    return nullptr;
+}
+
+bool SdrTextObj::ImpCanConvTextToCurve() const
+{
+    return !IsOutlText();
+}
+
+SdrPathObjUniquePtr SdrTextObj::ImpConvertMakeObj(const basegfx::B2DPolyPolygon& rPolyPolygon, bool bClosed, bool bBezier) const
+{
+    SdrObjKind ePathKind = bClosed ? OBJ_PATHFILL : OBJ_PATHLINE;
+    basegfx::B2DPolyPolygon aB2DPolyPolygon(rPolyPolygon);
+
+    // #i37011#
+    if(!bBezier)
+    {
+        aB2DPolyPolygon = basegfx::utils::adaptiveSubdivideByAngle(aB2DPolyPolygon);
+        ePathKind = bClosed ? OBJ_POLY : OBJ_PLIN;
+    }
+
+    SdrPathObjUniquePtr pPathObj(new SdrPathObj(
+        getSdrModelFromSdrObject(),
+        ePathKind,
+        aB2DPolyPolygon));
+
+    if(bBezier)
+    {
+        // create bezier curves
+        pPathObj->SetPathPoly(basegfx::utils::expandToCurve(pPathObj->GetPathPoly()));
+    }
+
+    pPathObj->ImpSetAnchorPos(aAnchor);
+    pPathObj->NbcSetLayer(GetLayer());
+    sdr::properties::ItemChangeBroadcaster aC(*pPathObj);
+    pPathObj->ClearMergedItem();
+    pPathObj->SetMergedItemSet(GetObjectItemSet());
+    pPathObj->GetProperties().BroadcastItemChange(aC);
+    pPathObj->NbcSetStyleSheet(GetStyleSheet(), true);
+
+    return pPathObj;
+}
+
+SdrObjectUniquePtr SdrTextObj::ImpConvertAddText(SdrObjectUniquePtr pObj, bool bBezier) const
+{
+    if(!ImpCanConvTextToCurve())
+    {
+        return pObj;
+    }
+
+    SdrObjectUniquePtr pText = ImpConvertContainedTextToSdrPathObjs(!bBezier);
+
+    if(!pText)
+    {
+        return pObj;
+    }
+
+    if(!pObj)
+    {
+        return pText;
+    }
+
+    if(pText->IsGroupObject())
+    {
+        // is already group object, add partial shape in front
+        SdrObjList* pOL=pText->GetSubList();
+        pOL->InsertObject(pObj.release(),0);
+
+        return pText;
+    }
+    else
+    {
+        // not yet a group, create one and add partial and new shapes
+        std::unique_ptr<SdrObjGroup, SdrObjectFreeOp> pGrp(new SdrObjGroup(getSdrModelFromSdrObject()));
+        SdrObjList* pOL=pGrp->GetSubList();
+        pOL->InsertObject(pObj.release());
+        pOL->InsertObject(pText.release());
+
+        return pGrp;
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdouno.cxx b/svx/source/svdraw/svdouno.cxx
new file mode 100644
index 000000000..49cea290a
--- /dev/null
+++ b/svx/source/svdraw/svdouno.cxx
@@ -0,0 +1,510 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sdr/contact/viewcontactofunocontrol.hxx>
+#include <sdr/contact/viewobjectcontactofunocontrol.hxx>
+#include <com/sun/star/container/XChild.hpp>
+#include <com/sun/star/beans/XPropertySet.hpp>
+#include <com/sun/star/util/XCloneable.hpp>
+#include <com/sun/star/uno/XComponentContext.hpp>
+#include <comphelper/processfactory.hxx>
+#include <svx/svdouno.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdview.hxx>
+#include <svx/svdorect.hxx>
+#include <svx/svdviter.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <rtl/ref.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <tools/diagnose_ex.h>
+#include <tools/debug.hxx>
+#include <o3tl/sorted_vector.hxx>
+
+using namespace ::com::sun::star;
+using namespace sdr::contact;
+
+
+//   Defines
+
+
+//   Helper class SdrControlEventListenerImpl
+
+#include <com/sun/star/lang/XEventListener.hpp>
+
+#include <cppuhelper/implbase.hxx>
+
+
+class SdrControlEventListenerImpl : public ::cppu::WeakImplHelper< css::lang::XEventListener >
+{
+protected:
+    SdrUnoObj*                  pObj;
+
+public:
+    explicit SdrControlEventListenerImpl(SdrUnoObj* _pObj)
+    :   pObj(_pObj)
+    {}
+
+    // XEventListener
+    virtual void SAL_CALL disposing( const css::lang::EventObject& Source ) override;
+
+    void StopListening(const uno::Reference< lang::XComponent >& xComp);
+    void StartListening(const uno::Reference< lang::XComponent >& xComp);
+};
+
+// XEventListener
+void SAL_CALL SdrControlEventListenerImpl::disposing( const css::lang::EventObject& /*Source*/)
+{
+    if (pObj)
+    {
+        pObj->xUnoControlModel = nullptr;
+    }
+}
+
+void SdrControlEventListenerImpl::StopListening(const uno::Reference< lang::XComponent >& xComp)
+{
+    if (xComp.is())
+        xComp->removeEventListener(this);
+}
+
+void SdrControlEventListenerImpl::StartListening(const uno::Reference< lang::XComponent >& xComp)
+{
+    if (xComp.is())
+        xComp->addEventListener(this);
+}
+
+
+struct SdrUnoObjDataHolder
+{
+    mutable ::rtl::Reference< SdrControlEventListenerImpl >
+                                    pEventListener;
+};
+
+
+namespace
+{
+    void lcl_ensureControlVisibility( SdrView const * _pView, const SdrUnoObj* _pObject, bool _bVisible )
+    {
+        OSL_PRECOND( _pObject, "lcl_ensureControlVisibility: no object -> no survival!" );
+
+        SdrPageView* pPageView = _pView ? _pView->GetSdrPageView() : nullptr;
+        DBG_ASSERT( pPageView, "lcl_ensureControlVisibility: no view found!" );
+        if ( !pPageView )
+            return;
+
+        ViewContact& rUnoControlContact( _pObject->GetViewContact() );
+
+        for ( sal_uInt32 i = 0; i < pPageView->PageWindowCount(); ++i )
+        {
+            SdrPageWindow* pPageWindow = pPageView->GetPageWindow( i );
+            DBG_ASSERT( pPageWindow, "lcl_ensureControlVisibility: invalid PageViewWindow!" );
+            if ( !pPageWindow )
+                continue;
+
+            if ( !pPageWindow->HasObjectContact() )
+                continue;
+
+            ObjectContact& rPageViewContact( pPageWindow->GetObjectContact() );
+            const ViewObjectContact& rViewObjectContact( rUnoControlContact.GetViewObjectContact( rPageViewContact ) );
+            const ViewObjectContactOfUnoControl* pUnoControlContact = dynamic_cast< const ViewObjectContactOfUnoControl* >( &rViewObjectContact );
+            DBG_ASSERT( pUnoControlContact, "lcl_ensureControlVisibility: wrong ViewObjectContact type!" );
+            if ( !pUnoControlContact )
+                continue;
+
+            pUnoControlContact->ensureControlVisibility( _bVisible );
+        }
+    }
+}
+
+SdrUnoObj::SdrUnoObj(
+    SdrModel& rSdrModel,
+    const OUString& rModelName)
+:   SdrRectObj(rSdrModel),
+    m_pImpl( new SdrUnoObjDataHolder )
+{
+    bIsUnoObj = true;
+
+    m_pImpl->pEventListener = new SdrControlEventListenerImpl(this);
+
+    // only an owner may create independently
+    if (!rModelName.isEmpty())
+        CreateUnoControlModel(rModelName);
+}
+
+SdrUnoObj::SdrUnoObj(
+    SdrModel& rSdrModel,
+    const OUString& rModelName,
+    const uno::Reference< lang::XMultiServiceFactory >& rxSFac)
+:   SdrRectObj(rSdrModel),
+    m_pImpl( new SdrUnoObjDataHolder )
+{
+    bIsUnoObj = true;
+
+    m_pImpl->pEventListener = new SdrControlEventListenerImpl(this);
+
+    // only an owner may create independently
+    if (!rModelName.isEmpty())
+        CreateUnoControlModel(rModelName,rxSFac);
+}
+
+SdrUnoObj::~SdrUnoObj()
+{
+    try
+    {
+        // clean up the control model
+        uno::Reference< lang::XComponent > xComp(xUnoControlModel, uno::UNO_QUERY);
+        if (xComp.is())
+        {
+            // is the control model owned by its environment?
+            uno::Reference< container::XChild > xContent(xUnoControlModel, uno::UNO_QUERY);
+            if (xContent.is() && !xContent->getParent().is())
+                xComp->dispose();
+            else
+                m_pImpl->pEventListener->StopListening(xComp);
+        }
+    }
+    catch( const uno::Exception& )
+    {
+        TOOLS_WARN_EXCEPTION( "svx", "SdrUnoObj::~SdrUnoObj" );
+    }
+}
+
+void SdrUnoObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rInfo.bRotateFreeAllowed        =   false;
+    rInfo.bRotate90Allowed          =   false;
+    rInfo.bMirrorFreeAllowed        =   false;
+    rInfo.bMirror45Allowed          =   false;
+    rInfo.bMirror90Allowed          =   false;
+    rInfo.bTransparenceAllowed = false;
+    rInfo.bShearAllowed             =   false;
+    rInfo.bEdgeRadiusAllowed        =   false;
+    rInfo.bNoOrthoDesired           =   false;
+    rInfo.bCanConvToPath            =   false;
+    rInfo.bCanConvToPoly            =   false;
+    rInfo.bCanConvToPathLineToArea  =   false;
+    rInfo.bCanConvToPolyLineToArea  =   false;
+    rInfo.bCanConvToContour = false;
+}
+
+sal_uInt16 SdrUnoObj::GetObjIdentifier() const
+{
+    return sal_uInt16(OBJ_UNO);
+}
+
+void SdrUnoObj::SetContextWritingMode( const sal_Int16 _nContextWritingMode )
+{
+    try
+    {
+        uno::Reference< beans::XPropertySet > xModelProperties( GetUnoControlModel(), uno::UNO_QUERY_THROW );
+        xModelProperties->setPropertyValue( "ContextWritingMode", uno::makeAny( _nContextWritingMode ) );
+    }
+    catch( const uno::Exception& )
+    {
+        DBG_UNHANDLED_EXCEPTION("svx");
+    }
+}
+
+OUString SdrUnoObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(SvxResId(STR_ObjNameSingulUno));
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrUnoObj::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralUno);
+}
+
+SdrUnoObj* SdrUnoObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrUnoObj >(rTargetModel);
+}
+
+SdrUnoObj& SdrUnoObj::operator= (const SdrUnoObj& rObj)
+{
+    if( this == &rObj )
+        return *this;
+    SdrRectObj::operator= (rObj);
+
+    // release the reference to the current control model
+    SetUnoControlModel( nullptr );
+
+    aUnoControlModelTypeName = rObj.aUnoControlModelTypeName;
+    aUnoControlTypeName = rObj.aUnoControlTypeName;
+
+    // copy the uno control model
+    const uno::Reference< awt::XControlModel > xSourceControlModel = rObj.GetUnoControlModel();
+    if ( xSourceControlModel.is() )
+    {
+        try
+        {
+            uno::Reference< util::XCloneable > xClone( xSourceControlModel, uno::UNO_QUERY_THROW );
+            xUnoControlModel.set( xClone->createClone(), uno::UNO_QUERY_THROW );
+        }
+        catch( const uno::Exception& )
+        {
+            DBG_UNHANDLED_EXCEPTION("svx");
+        }
+    }
+
+    // get service name of the control from the control model
+    uno::Reference< beans::XPropertySet > xSet(xUnoControlModel, uno::UNO_QUERY);
+    if (xSet.is())
+    {
+        uno::Any aValue( xSet->getPropertyValue("DefaultControl") );
+        OUString aStr;
+
+        if( aValue >>= aStr )
+            aUnoControlTypeName = aStr;
+    }
+
+    uno::Reference< lang::XComponent > xComp(xUnoControlModel, uno::UNO_QUERY);
+    if (xComp.is())
+        m_pImpl->pEventListener->StartListening(xComp);
+    return *this;
+}
+
+void SdrUnoObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    SdrRectObj::NbcResize(rRef,xFact,yFact);
+
+    if (aGeo.nShearAngle!=0 || aGeo.nRotationAngle!=0)
+    {
+        // small correctors
+        if (aGeo.nRotationAngle>=9000 && aGeo.nRotationAngle<27000)
+        {
+            maRect.Move(maRect.Left()-maRect.Right(),maRect.Top()-maRect.Bottom());
+        }
+
+        aGeo.nRotationAngle  = 0;
+        aGeo.nShearAngle = 0;
+        aGeo.nSin       = 0.0;
+        aGeo.nCos       = 1.0;
+        aGeo.nTan       = 0.0;
+        SetRectsDirty();
+    }
+}
+
+
+bool SdrUnoObj::hasSpecialDrag() const
+{
+    // no special drag; we have no rounding rect and
+    // do want frame handles
+    return false;
+}
+
+void SdrUnoObj::NbcSetLayer( SdrLayerID _nLayer )
+{
+    if ( GetLayer() == _nLayer )
+    {   // redundant call -> not interested in doing anything here
+        SdrRectObj::NbcSetLayer( _nLayer );
+        return;
+    }
+
+    // we need some special handling here in case we're moved from an invisible layer
+    // to a visible one, or vice versa
+    // (relative to a layer. Remember that the visibility of a layer is a view attribute
+    // - the same layer can be visible in one view, and invisible in another view, at the
+    // same time)
+
+    // collect all views in which our old layer is visible
+    o3tl::sorted_vector< SdrView* > aPreviouslyVisible;
+
+    {
+        SdrViewIter aIter( this );
+        for ( SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView() )
+            aPreviouslyVisible.insert( pView );
+    }
+
+    SdrRectObj::NbcSetLayer( _nLayer );
+
+    // collect all views in which our new layer is visible
+    o3tl::sorted_vector< SdrView* > aNewlyVisible;
+
+    {
+        SdrViewIter aIter( this );
+        for ( SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView() )
+        {
+            if ( aPreviouslyVisible.erase(pView) == 0 )
+            {
+                // in pView, we were visible _before_ the layer change, and are
+                // _not_ visible after the layer change
+                // => remember this view, as our visibility there changed
+                aNewlyVisible.insert( pView );
+            }
+        }
+    }
+
+    // now aPreviouslyVisible contains all views where we became invisible
+    for (const auto& rpView : aPreviouslyVisible)
+    {
+        lcl_ensureControlVisibility( rpView, this, false );
+    }
+
+    // and aNewlyVisible all views where we became visible
+    for (const auto& rpView : aNewlyVisible)
+    {
+        lcl_ensureControlVisibility( rpView, this, true );
+    }
+}
+
+void SdrUnoObj::CreateUnoControlModel(const OUString& rModelName)
+{
+    DBG_ASSERT(!xUnoControlModel.is(), "model already exists");
+
+    aUnoControlModelTypeName = rModelName;
+
+    uno::Reference< awt::XControlModel >   xModel;
+    uno::Reference< uno::XComponentContext > xContext( ::comphelper::getProcessComponentContext() );
+    if (!aUnoControlModelTypeName.isEmpty() )
+    {
+        xModel.set(xContext->getServiceManager()->createInstanceWithContext(
+            aUnoControlModelTypeName, xContext), uno::UNO_QUERY);
+
+        if (xModel.is())
+            SetChanged();
+    }
+
+    SetUnoControlModel(xModel);
+}
+
+void SdrUnoObj::CreateUnoControlModel(const OUString& rModelName,
+                                      const uno::Reference< lang::XMultiServiceFactory >& rxSFac)
+{
+    DBG_ASSERT(!xUnoControlModel.is(), "model already exists");
+
+    aUnoControlModelTypeName = rModelName;
+
+    uno::Reference< awt::XControlModel >   xModel;
+    if (!aUnoControlModelTypeName.isEmpty() && rxSFac.is() )
+    {
+        xModel.set(rxSFac->createInstance(aUnoControlModelTypeName), uno::UNO_QUERY);
+
+        if (xModel.is())
+            SetChanged();
+    }
+
+    SetUnoControlModel(xModel);
+}
+
+void SdrUnoObj::SetUnoControlModel( const uno::Reference< awt::XControlModel >& xModel)
+{
+    if (xUnoControlModel.is())
+    {
+        uno::Reference< lang::XComponent > xComp(xUnoControlModel, uno::UNO_QUERY);
+        if (xComp.is())
+            m_pImpl->pEventListener->StopListening(xComp);
+    }
+
+    xUnoControlModel = xModel;
+
+    // control model has to contain service name of the control
+    if (xUnoControlModel.is())
+    {
+        uno::Reference< beans::XPropertySet > xSet(xUnoControlModel, uno::UNO_QUERY);
+        if (xSet.is())
+        {
+            uno::Any aValue( xSet->getPropertyValue("DefaultControl") );
+            OUString aStr;
+            if( aValue >>= aStr )
+                aUnoControlTypeName = aStr;
+        }
+
+        uno::Reference< lang::XComponent > xComp(xUnoControlModel, uno::UNO_QUERY);
+        if (xComp.is())
+            m_pImpl->pEventListener->StartListening(xComp);
+    }
+
+    // invalidate all ViewObject contacts
+    ViewContactOfUnoControl* pVC = nullptr;
+    if ( impl_getViewContact( pVC ) )
+    {
+        // flushViewObjectContacts() removes all existing VOCs for the local DrawHierarchy. This
+        // is always allowed since they will be re-created on demand (and with the changed model)
+        GetViewContact().flushViewObjectContacts();
+    }
+}
+
+
+uno::Reference< awt::XControl > SdrUnoObj::GetUnoControl(const SdrView& _rView, const OutputDevice& _rOut) const
+{
+    uno::Reference< awt::XControl > xControl;
+
+    SdrPageView* pPageView = _rView.GetSdrPageView();
+    OSL_ENSURE( pPageView && getSdrPageFromSdrObject() == pPageView->GetPage(), "SdrUnoObj::GetUnoControl: This object is not displayed in that particular view!" );
+    if ( !pPageView || getSdrPageFromSdrObject() != pPageView->GetPage() )
+        return nullptr;
+
+    SdrPageWindow* pPageWindow = pPageView->FindPageWindow( _rOut );
+    OSL_ENSURE( pPageWindow, "SdrUnoObj::GetUnoControl: did not find my SdrPageWindow!" );
+    if ( !pPageWindow )
+        return nullptr;
+
+    ViewObjectContact& rViewObjectContact( GetViewContact().GetViewObjectContact( pPageWindow->GetObjectContact() ) );
+    ViewObjectContactOfUnoControl* pUnoContact = dynamic_cast< ViewObjectContactOfUnoControl* >( &rViewObjectContact );
+    OSL_ENSURE( pUnoContact, "SdrUnoObj::GetUnoControl: wrong contact type!" );
+    if ( pUnoContact )
+        xControl = pUnoContact->getControl();
+
+    return xControl;
+}
+
+
+uno::Reference< awt::XControl > SdrUnoObj::GetTemporaryControlForWindow(
+    const vcl::Window& _rWindow, uno::Reference< awt::XControlContainer >& _inout_ControlContainer ) const
+{
+    uno::Reference< awt::XControl > xControl;
+
+    ViewContactOfUnoControl* pVC = nullptr;
+    if ( impl_getViewContact( pVC ) )
+        xControl = pVC->getTemporaryControlForWindow( _rWindow, _inout_ControlContainer );
+
+    return xControl;
+}
+
+
+bool SdrUnoObj::impl_getViewContact( ViewContactOfUnoControl*& _out_rpContact ) const
+{
+    ViewContact& rViewContact( GetViewContact() );
+    _out_rpContact = dynamic_cast< ViewContactOfUnoControl* >( &rViewContact );
+    DBG_ASSERT( _out_rpContact, "SdrUnoObj::impl_getViewContact: could not find my ViewContact!" );
+    return ( _out_rpContact != nullptr );
+}
+
+
+std::unique_ptr<sdr::contact::ViewContact> SdrUnoObj::CreateObjectSpecificViewContact()
+{
+  return std::make_unique<sdr::contact::ViewContactOfUnoControl>( *this );
+}
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdoutl.cxx b/svx/source/svdraw/svdoutl.cxx
new file mode 100644
index 000000000..fed5e1c82
--- /dev/null
+++ b/svx/source/svdraw/svdoutl.cxx
@@ -0,0 +1,106 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdoutl.hxx>
+#include <editeng/outliner.hxx>
+#include <svx/svdotext.hxx>
+#include <editeng/editstat.hxx>
+#include <svl/itempool.hxx>
+#include <editeng/editview.hxx>
+
+
+SdrOutliner::SdrOutliner( SfxItemPool* pItemPool, OutlinerMode nMode )
+:   Outliner( pItemPool, nMode ),
+    mpVisualizedPage(nullptr)
+{
+}
+
+
+SdrOutliner::~SdrOutliner()
+{
+}
+
+
+void SdrOutliner::SetTextObj( const SdrTextObj* pObj )
+{
+    if( pObj && pObj != mpTextObj.get() )
+    {
+        SetUpdateMode(false);
+        OutlinerMode nOutlinerMode2 = OutlinerMode::OutlineObject;
+        if ( !pObj->IsOutlText() )
+            nOutlinerMode2 = OutlinerMode::TextObject;
+        Init( nOutlinerMode2 );
+
+        SetGlobalCharStretching();
+
+        EEControlBits nStat = GetControlWord();
+        nStat &= ~EEControlBits( EEControlBits::STRETCHING | EEControlBits::AUTOPAGESIZE );
+        SetControlWord(nStat);
+
+        Size aMaxSize( 100000,100000 );
+        SetMinAutoPaperSize( Size() );
+        SetMaxAutoPaperSize( aMaxSize );
+        SetPaperSize( aMaxSize );
+        ClearPolygon();
+    }
+
+    mpTextObj.reset( const_cast< SdrTextObj* >(pObj) );
+}
+
+void SdrOutliner::SetTextObjNoInit( const SdrTextObj* pObj )
+{
+    mpTextObj.reset( const_cast< SdrTextObj* >(pObj) );
+}
+
+OUString SdrOutliner::CalcFieldValue(const SvxFieldItem& rField, sal_Int32 nPara, sal_Int32 nPos,
+                                     std::optional<Color>& rpTxtColor, std::optional<Color>& rpFldColor)
+{
+    bool bOk = false;
+    OUString aRet;
+
+    if(mpTextObj.is())
+        bOk = mpTextObj->CalcFieldValue(rField, nPara, nPos, false, rpTxtColor, rpFldColor, aRet);
+
+    if (!bOk)
+        aRet = Outliner::CalcFieldValue(rField, nPara, nPos, rpTxtColor, rpFldColor);
+
+    return aRet;
+}
+
+const SdrTextObj* SdrOutliner::GetTextObj() const
+{
+    return mpTextObj.get();
+}
+
+bool SdrOutliner::hasEditViewCallbacks() const
+{
+    for (size_t a(0); a < GetViewCount(); a++)
+    {
+        OutlinerView* pOutlinerView = GetView(a);
+
+        if (pOutlinerView && pOutlinerView->GetEditView().getEditViewCallbacks())
+        {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdoutlinercache.cxx b/svx/source/svdraw/svdoutlinercache.cxx
new file mode 100644
index 000000000..1d9d75d81
--- /dev/null
+++ b/svx/source/svdraw/svdoutlinercache.cxx
@@ -0,0 +1,98 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svdoutlinercache.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdetc.hxx>
+
+SdrOutlinerCache::SdrOutlinerCache( SdrModel* pModel )
+:   mpModel( pModel ),
+    maModeOutline(),
+    maModeText(),
+    maActiveOutliners()
+{
+}
+
+std::unique_ptr<SdrOutliner> SdrOutlinerCache::createOutliner( OutlinerMode nOutlinerMode )
+{
+    std::unique_ptr<SdrOutliner> pOutliner;
+
+    if( (OutlinerMode::OutlineObject == nOutlinerMode) && !maModeOutline.empty() )
+    {
+        pOutliner = std::move(maModeOutline.back());
+        maModeOutline.pop_back();
+    }
+    else if( (OutlinerMode::TextObject == nOutlinerMode) && !maModeText.empty() )
+    {
+        pOutliner = std::move(maModeText.back());
+        maModeText.pop_back();
+    }
+    else
+    {
+        pOutliner = SdrMakeOutliner(nOutlinerMode, *mpModel);
+        Outliner& aDrawOutliner = mpModel->GetDrawOutliner();
+        pOutliner->SetCalcFieldValueHdl( aDrawOutliner.GetCalcFieldValueHdl() );
+        maActiveOutliners.insert(pOutliner.get());
+    }
+
+    return pOutliner;
+}
+
+SdrOutlinerCache::~SdrOutlinerCache()
+{
+}
+
+void SdrOutlinerCache::disposeOutliner( std::unique_ptr<SdrOutliner> pOutliner )
+{
+    if( pOutliner )
+    {
+        OutlinerMode nOutlMode = pOutliner->GetOutlinerMode();
+
+        if( OutlinerMode::OutlineObject == nOutlMode )
+        {
+            pOutliner->Clear();
+            pOutliner->SetVertical( false );
+
+            // Deregister on outliner, might be reused from outliner cache
+            pOutliner->SetNotifyHdl( Link<EENotify&,void>() );
+            maModeOutline.emplace_back(std::move(pOutliner));
+        }
+        else if( OutlinerMode::TextObject == nOutlMode )
+        {
+            pOutliner->Clear();
+            pOutliner->SetVertical( false );
+
+            // Deregister on outliner, might be reused from outliner cache
+            pOutliner->SetNotifyHdl( Link<EENotify&,void>() );
+            maModeText.emplace_back(std::move(pOutliner));
+        }
+        else
+        {
+            maActiveOutliners.erase(pOutliner.get());
+        }
+    }
+}
+
+std::vector< SdrOutliner* > SdrOutlinerCache::GetActiveOutliners() const
+{
+    return std::vector< SdrOutliner* >(maActiveOutliners.begin(), maActiveOutliners.end());
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdovirt.cxx b/svx/source/svdraw/svdovirt.cxx
new file mode 100644
index 000000000..1fc49087a
--- /dev/null
+++ b/svx/source/svdraw/svdovirt.cxx
@@ -0,0 +1,549 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdovirt.hxx>
+#include <svx/svdhdl.hxx>
+#include <svx/sdr/contact/viewcontactofvirtobj.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svddrgv.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <rtl/ustrbuf.hxx>
+
+sdr::properties::BaseProperties& SdrVirtObj::GetProperties() const
+{
+    return rRefObj.GetProperties();
+}
+
+
+// #i27224#
+std::unique_ptr<sdr::contact::ViewContact> SdrVirtObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfVirtObj>(*this);
+}
+
+SdrVirtObj::SdrVirtObj(
+    SdrModel& rSdrModel,
+    SdrObject& rNewObj)
+:   SdrObject(rSdrModel),
+    rRefObj(rNewObj)
+{
+    bVirtObj=true; // this is only a virtual object
+    rRefObj.AddReference(*this);
+    bClosedObj=rRefObj.IsClosedObj();
+}
+
+SdrVirtObj::~SdrVirtObj()
+{
+    rRefObj.DelReference(*this);
+}
+
+const SdrObject& SdrVirtObj::GetReferencedObj() const
+{
+    return rRefObj;
+}
+
+SdrObject& SdrVirtObj::ReferencedObj()
+{
+    return rRefObj;
+}
+
+void SdrVirtObj::Notify(SfxBroadcaster& /*rBC*/, const SfxHint& /*rHint*/)
+{
+    bClosedObj=rRefObj.IsClosedObj();
+    SetRectsDirty(); // TODO: Optimize this.
+
+    // Only a repaint here, rRefObj may have changed and broadcasts
+    ActionChanged();
+}
+
+void SdrVirtObj::NbcSetAnchorPos(const Point& rAnchorPos)
+{
+    aAnchor=rAnchorPos;
+}
+
+void SdrVirtObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
+{
+    rRefObj.TakeObjInfo(rInfo);
+}
+
+SdrInventor SdrVirtObj::GetObjInventor() const
+{
+    return rRefObj.GetObjInventor();
+}
+
+sal_uInt16 SdrVirtObj::GetObjIdentifier() const
+{
+    return rRefObj.GetObjIdentifier();
+}
+
+SdrObjList* SdrVirtObj::GetSubList() const
+{
+    return rRefObj.GetSubList();
+}
+
+const tools::Rectangle& SdrVirtObj::GetCurrentBoundRect() const
+{
+    const_cast<SdrVirtObj*>(this)->aOutRect=rRefObj.GetCurrentBoundRect(); // TODO: Optimize this.
+    const_cast<SdrVirtObj*>(this)->aOutRect+=aAnchor;
+    return aOutRect;
+}
+
+const tools::Rectangle& SdrVirtObj::GetLastBoundRect() const
+{
+    const_cast<SdrVirtObj*>(this)->aOutRect=rRefObj.GetLastBoundRect(); // TODO: Optimize this.
+    const_cast<SdrVirtObj*>(this)->aOutRect+=aAnchor;
+    return aOutRect;
+}
+
+void SdrVirtObj::RecalcBoundRect()
+{
+    aOutRect=rRefObj.GetCurrentBoundRect();
+    aOutRect+=aAnchor;
+}
+
+SdrVirtObj* SdrVirtObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return CloneHelper< SdrVirtObj >(rTargetModel);
+    // TTTT not sure if the above works - how could SdrObjFactory::MakeNewObject
+    // create an object with correct rRefObj (?) OTOH VirtObj probably needs not
+    // to be cloned ever - only used in Writer for multiple instances e.g. Header/Footer
+    // return new SdrVirtObj(
+    //     getSdrModelFromSdrObject(),
+    //     rRefObj); // only a further reference
+}
+
+SdrVirtObj& SdrVirtObj::operator=(const SdrVirtObj& rObj)
+{
+    SdrObject::operator=(rObj);
+
+    // reference different object?? TTTT -> yes!
+    rRefObj.DelReference(*this);
+    rRefObj = rObj.rRefObj;
+    rRefObj.AddReference(*this);
+
+    aSnapRect = rObj.aSnapRect;
+    aAnchor = rObj.aAnchor;
+
+    return *this;
+}
+
+OUString SdrVirtObj::TakeObjNameSingul() const
+{
+    OUStringBuffer sName(rRefObj.TakeObjNameSingul());
+    sName.insert(0, '[');
+    sName.append(']');
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName.append(' ');
+        sName.append('\'');
+        sName.append(aName);
+        sName.append('\'');
+    }
+
+    return sName.makeStringAndClear();
+}
+
+OUString SdrVirtObj::TakeObjNamePlural() const
+{
+    OUStringBuffer sName(rRefObj.TakeObjNamePlural());
+    sName.insert(0, '[');
+    sName.append(']');
+    return sName.makeStringAndClear();
+}
+
+bool SdrVirtObj::HasLimitedRotation() const
+{
+    // RotGrfFlyFrame: If true, this SdrObject supports only limited rotation
+    return rRefObj.HasLimitedRotation();
+}
+
+basegfx::B2DPolyPolygon SdrVirtObj::TakeXorPoly() const
+{
+    basegfx::B2DPolyPolygon aPolyPolygon(rRefObj.TakeXorPoly());
+
+    if(aAnchor.X() || aAnchor.Y())
+    {
+        aPolyPolygon.transform(basegfx::utils::createTranslateB2DHomMatrix(aAnchor.X(), aAnchor.Y()));
+    }
+
+    return aPolyPolygon;
+}
+
+
+sal_uInt32 SdrVirtObj::GetHdlCount() const
+{
+    return rRefObj.GetHdlCount();
+}
+
+void SdrVirtObj::AddToHdlList(SdrHdlList& rHdlList) const
+{
+    SdrHdlList tempList(nullptr);
+    rRefObj.AddToHdlList(tempList);
+    for (size_t i=0; i<tempList.GetHdlCount(); ++i)
+    {
+        SdrHdl* pHdl = tempList.GetHdl(i);
+        Point aP(pHdl->GetPos()+aAnchor);
+        pHdl->SetPos(aP);
+    }
+    tempList.MoveTo(rHdlList);
+}
+
+void SdrVirtObj::AddToPlusHdlList(SdrHdlList& rHdlList, SdrHdl& rHdl) const
+{
+    SdrHdlList tempList(nullptr);
+    rRefObj.AddToPlusHdlList(tempList, rHdl);
+    for (size_t i=0; i<tempList.GetHdlCount(); ++i)
+    {
+        SdrHdl* pHdl = tempList.GetHdl(i);
+        Point aP(pHdl->GetPos()+aAnchor);
+        pHdl->SetPos(aP);
+    }
+    tempList.MoveTo(rHdlList);
+}
+
+bool SdrVirtObj::hasSpecialDrag() const
+{
+    return rRefObj.hasSpecialDrag();
+}
+
+bool SdrVirtObj::supportsFullDrag() const
+{
+    return false;
+}
+
+SdrObjectUniquePtr SdrVirtObj::getFullDragClone() const
+{
+    SdrObject& rReferencedObject = const_cast<SdrVirtObj*>(this)->ReferencedObj();
+    return SdrObjectUniquePtr(new SdrGrafObj(
+        getSdrModelFromSdrObject(),
+        SdrDragView::GetObjGraphic(rReferencedObject),
+        GetLogicRect()));
+}
+
+bool SdrVirtObj::beginSpecialDrag(SdrDragStat& rDrag) const
+{
+    return rRefObj.beginSpecialDrag(rDrag);
+}
+
+bool SdrVirtObj::applySpecialDrag(SdrDragStat& rDrag)
+{
+    return rRefObj.applySpecialDrag(rDrag);
+}
+
+basegfx::B2DPolyPolygon SdrVirtObj::getSpecialDragPoly(const SdrDragStat& rDrag) const
+{
+    return rRefObj.getSpecialDragPoly(rDrag);
+    // TODO: we don't handle offsets yet!
+}
+
+OUString SdrVirtObj::getSpecialDragComment(const SdrDragStat& rDrag) const
+{
+    return rRefObj.getSpecialDragComment(rDrag);
+}
+
+
+bool SdrVirtObj::BegCreate(SdrDragStat& rStat)
+{
+    return rRefObj.BegCreate(rStat);
+}
+
+bool SdrVirtObj::MovCreate(SdrDragStat& rStat)
+{
+    return rRefObj.MovCreate(rStat);
+}
+
+bool SdrVirtObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
+{
+    return rRefObj.EndCreate(rStat,eCmd);
+}
+
+bool SdrVirtObj::BckCreate(SdrDragStat& rStat)
+{
+    return rRefObj.BckCreate(rStat);
+}
+
+void SdrVirtObj::BrkCreate(SdrDragStat& rStat)
+{
+    rRefObj.BrkCreate(rStat);
+}
+
+basegfx::B2DPolyPolygon SdrVirtObj::TakeCreatePoly(const SdrDragStat& rDrag) const
+{
+    return rRefObj.TakeCreatePoly(rDrag);
+    // TODO: we don't handle offsets yet!
+}
+
+
+void SdrVirtObj::NbcMove(const Size& rSiz)
+{
+    aAnchor.Move(rSiz);
+    SetRectsDirty();
+}
+
+void SdrVirtObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    rRefObj.NbcResize(rRef-aAnchor,xFact,yFact);
+    SetRectsDirty();
+}
+
+void SdrVirtObj::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    rRefObj.NbcRotate(rRef-aAnchor,nAngle,sn,cs);
+    SetRectsDirty();
+}
+
+void SdrVirtObj::NbcMirror(const Point& rRef1, const Point& rRef2)
+{
+    rRefObj.NbcMirror(rRef1-aAnchor,rRef2-aAnchor);
+    SetRectsDirty();
+}
+
+void SdrVirtObj::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    rRefObj.NbcShear(rRef-aAnchor,nAngle,tn,bVShear);
+    SetRectsDirty();
+}
+
+
+void SdrVirtObj::Move(const Size& rSiz)
+{
+    if (!rSiz.IsEmpty()) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        NbcMove(rSiz);
+        SetChanged();
+        BroadcastObjectChange();
+        SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
+    }
+}
+
+void SdrVirtObj::Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bUnsetRelative)
+{
+    if (xFact.GetNumerator()!=xFact.GetDenominator() || yFact.GetNumerator()!=yFact.GetDenominator()) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        rRefObj.Resize(rRef-aAnchor,xFact,yFact, bUnsetRelative);
+        SetRectsDirty();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrVirtObj::Rotate(const Point& rRef, long nAngle, double sn, double cs)
+{
+    if (nAngle!=0) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        rRefObj.Rotate(rRef-aAnchor,nAngle,sn,cs);
+        SetRectsDirty();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+void SdrVirtObj::Mirror(const Point& rRef1, const Point& rRef2)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    rRefObj.Mirror(rRef1-aAnchor,rRef2-aAnchor);
+    SetRectsDirty();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrVirtObj::Shear(const Point& rRef, long nAngle, double tn, bool bVShear)
+{
+    if (nAngle!=0) {
+        tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+        rRefObj.Shear(rRef-aAnchor,nAngle,tn,bVShear);
+        SetRectsDirty();
+        SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+    }
+}
+
+
+void SdrVirtObj::RecalcSnapRect()
+{
+    aSnapRect=rRefObj.GetSnapRect();
+    aSnapRect+=aAnchor;
+}
+
+const tools::Rectangle& SdrVirtObj::GetSnapRect() const
+{
+    const_cast<SdrVirtObj*>(this)->aSnapRect=rRefObj.GetSnapRect();
+    const_cast<SdrVirtObj*>(this)->aSnapRect+=aAnchor;
+    return aSnapRect;
+}
+
+void SdrVirtObj::SetSnapRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    tools::Rectangle aR(rRect);
+    aR-=aAnchor;
+    rRefObj.SetSnapRect(aR);
+    SetRectsDirty();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrVirtObj::NbcSetSnapRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aR(rRect);
+    aR-=aAnchor;
+    SetRectsDirty();
+    rRefObj.NbcSetSnapRect(aR);
+}
+
+
+const tools::Rectangle& SdrVirtObj::GetLogicRect() const
+{
+    const_cast<SdrVirtObj*>(this)->aSnapRect=rRefObj.GetLogicRect();  // An abuse of aSnapRect!
+    const_cast<SdrVirtObj*>(this)->aSnapRect+=aAnchor;                // If there's trouble, we need another Rectangle Member (or a Heap).
+    return aSnapRect;
+}
+
+void SdrVirtObj::SetLogicRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    tools::Rectangle aR(rRect);
+    aR-=aAnchor;
+    rRefObj.SetLogicRect(aR);
+    SetRectsDirty();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+void SdrVirtObj::NbcSetLogicRect(const tools::Rectangle& rRect)
+{
+    tools::Rectangle aR(rRect);
+    aR-=aAnchor;
+    SetRectsDirty();
+    rRefObj.NbcSetLogicRect(aR);
+}
+
+
+long SdrVirtObj::GetRotateAngle() const
+{
+    return rRefObj.GetRotateAngle();
+}
+
+long SdrVirtObj::GetShearAngle(bool bVertical) const
+{
+    return rRefObj.GetShearAngle(bVertical);
+}
+
+
+sal_uInt32 SdrVirtObj::GetSnapPointCount() const
+{
+    return rRefObj.GetSnapPointCount();
+}
+
+Point SdrVirtObj::GetSnapPoint(sal_uInt32 i) const
+{
+    Point aP(rRefObj.GetSnapPoint(i));
+    aP+=aAnchor;
+    return aP;
+}
+
+bool SdrVirtObj::IsPolyObj() const
+{
+    return rRefObj.IsPolyObj();
+}
+
+sal_uInt32 SdrVirtObj::GetPointCount() const
+{
+    return rRefObj.GetPointCount();
+}
+
+Point SdrVirtObj::GetPoint(sal_uInt32 i) const
+{
+    return rRefObj.GetPoint(i) + aAnchor;
+}
+
+void SdrVirtObj::NbcSetPoint(const Point& rPnt, sal_uInt32 i)
+{
+    Point aP(rPnt);
+    aP-=aAnchor;
+    rRefObj.SetPoint(aP,i);
+    SetRectsDirty();
+}
+
+
+SdrObjGeoData* SdrVirtObj::NewGeoData() const
+{
+    return rRefObj.NewGeoData();
+}
+
+void SdrVirtObj::SaveGeoData(SdrObjGeoData& rGeo) const
+{
+    rRefObj.SaveGeoData(rGeo);
+}
+
+void SdrVirtObj::RestGeoData(const SdrObjGeoData& rGeo)
+{
+    rRefObj.RestGeoData(rGeo);
+    SetRectsDirty();
+}
+
+
+SdrObjGeoData* SdrVirtObj::GetGeoData() const
+{
+    return rRefObj.GetGeoData();
+}
+
+void SdrVirtObj::SetGeoData(const SdrObjGeoData& rGeo)
+{
+    tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
+    rRefObj.SetGeoData(rGeo);
+    SetRectsDirty();
+    SendUserCall(SdrUserCallType::Resize,aBoundRect0);
+}
+
+
+void SdrVirtObj::NbcReformatText()
+{
+    rRefObj.NbcReformatText();
+}
+
+bool SdrVirtObj::HasMacro() const
+{
+    return rRefObj.HasMacro();
+}
+
+SdrObject* SdrVirtObj::CheckMacroHit(const SdrObjMacroHitRec& rRec) const
+{
+    return rRefObj.CheckMacroHit(rRec); // TODO: positioning offset
+}
+
+PointerStyle SdrVirtObj::GetMacroPointer(const SdrObjMacroHitRec& rRec) const
+{
+    return rRefObj.GetMacroPointer(rRec); // TODO: positioning offset
+}
+
+void SdrVirtObj::PaintMacro(OutputDevice& rOut, const tools::Rectangle& rDirtyRect, const SdrObjMacroHitRec& rRec) const
+{
+    rRefObj.PaintMacro(rOut,rDirtyRect,rRec); // TODO: positioning offset
+}
+
+bool SdrVirtObj::DoMacro(const SdrObjMacroHitRec& rRec)
+{
+    return rRefObj.DoMacro(rRec); // TODO: positioning offset
+}
+
+Point SdrVirtObj::GetOffset() const
+{
+    // #i73248# default offset of SdrVirtObj is aAnchor
+    return aAnchor;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdpage.cxx b/svx/source/svdraw/svdpage.cxx
new file mode 100644
index 000000000..734becaf3
--- /dev/null
+++ b/svx/source/svdraw/svdpage.cxx
@@ -0,0 +1,1789 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <memory>
+#include <cassert>
+#include <set>
+#include <unordered_set>
+
+#include <svx/svdpage.hxx>
+
+#include <o3tl/safeint.hxx>
+#include <string.h>
+
+#include <tools/debug.hxx>
+#include <tools/diagnose_ex.h>
+
+#include <svtools/colorcfg.hxx>
+#include <svx/svdetc.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/svdoole2.hxx>
+#include <svx/svditer.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdlayer.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/fmdpage.hxx>
+
+#include <sdr/contact/viewcontactofsdrpage.hxx>
+#include <svx/sdr/contact/viewobjectcontact.hxx>
+#include <svx/sdr/contact/displayinfo.hxx>
+#include <algorithm>
+#include <svl/hint.hxx>
+#include <rtl/strbuf.hxx>
+#include <libxml/xmlwriter.h>
+
+#include <com/sun/star/lang/IllegalArgumentException.hpp>
+
+using namespace ::com::sun::star;
+
+class SdrObjList::WeakSdrObjectContainerType
+    : public ::std::vector<tools::WeakReference<SdrObject>>
+{
+public:
+    explicit WeakSdrObjectContainerType (const sal_Int32 nInitialSize)
+        : ::std::vector<tools::WeakReference<SdrObject>>(nInitialSize) {};
+};
+
+static const sal_Int32 InitialObjectContainerCapacity (64);
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+// helper to allow changing parent at SdrObject, but only from SdrObjList
+
+void SetParentAtSdrObjectFromSdrObjList(SdrObject& rSdrObject, SdrObjList* pNew)
+{
+    rSdrObject.setParentOfSdrObject(pNew);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+
+SdrObjList::SdrObjList()
+:   maList(),
+    maSdrObjListOutRect(),
+    maSdrObjListSnapRect(),
+    mbObjOrdNumsDirty(false),
+    mbRectsDirty(false),
+    mxNavigationOrder(),
+    mbIsNavigationOrderDirty(false)
+{
+    maList.reserve(InitialObjectContainerCapacity);
+}
+
+void SdrObjList::impClearSdrObjList(bool bBroadcast)
+{
+    SdrModel* pSdrModelFromRemovedSdrObject(nullptr);
+
+    while(!maList.empty())
+    {
+        // remove last object from list
+        SdrObject* pObj(maList.back());
+        RemoveObjectFromContainer(maList.size()-1);
+
+        // flushViewObjectContacts() is done since SdrObject::Free is not guaranteed
+        // to delete the object and thus refresh visualisations
+        pObj->GetViewContact().flushViewObjectContacts();
+
+        if(bBroadcast)
+        {
+            if(nullptr == pSdrModelFromRemovedSdrObject)
+            {
+                pSdrModelFromRemovedSdrObject = &pObj->getSdrModelFromSdrObject();
+            }
+
+            // sent remove hint (after removal, see RemoveObject())
+            // TTTT SdrPage not needed, can be accessed using SdrObject
+            SdrHint aHint(SdrHintKind::ObjectRemoved, *pObj, getSdrPageFromSdrObjList());
+            pObj->getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+
+        // delete the object itself
+        SdrObject::Free( pObj );
+    }
+
+    if(bBroadcast && nullptr != pSdrModelFromRemovedSdrObject)
+    {
+        pSdrModelFromRemovedSdrObject->SetChanged();
+    }
+}
+
+void SdrObjList::ClearSdrObjList()
+{
+    // clear SdrObjects with broadcasting
+    impClearSdrObjList(true);
+}
+
+SdrObjList::~SdrObjList()
+{
+    // clear SdrObjects without broadcasting
+    impClearSdrObjList(false);
+}
+
+SdrPage* SdrObjList::getSdrPageFromSdrObjList() const
+{
+    // default is no page and returns zero
+    return nullptr;
+}
+
+SdrObject* SdrObjList::getSdrObjectFromSdrObjList() const
+{
+    // default is no SdrObject (SdrObjGroup)
+    return nullptr;
+}
+
+void SdrObjList::CopyObjects(const SdrObjList& rSrcList)
+{
+    // clear SdrObjects with broadcasting
+    ClearSdrObjList();
+
+    mbObjOrdNumsDirty = false;
+    mbRectsDirty = false;
+    size_t nCloneErrCnt(0);
+    const size_t nCount(rSrcList.GetObjCount());
+
+    if(nullptr == getSdrObjectFromSdrObjList() && nullptr == getSdrPageFromSdrObjList())
+    {
+        OSL_ENSURE(false, "SdrObjList which is not part of SdrPage or SdrObject (!)");
+        return;
+    }
+
+    SdrModel& rTargetSdrModel(nullptr == getSdrObjectFromSdrObjList()
+        ? getSdrPageFromSdrObjList()->getSdrModelFromSdrPage()
+        : getSdrObjectFromSdrObjList()->getSdrModelFromSdrObject());
+
+    for (size_t no(0); no < nCount; ++no)
+    {
+        SdrObject* pSO(rSrcList.GetObj(no));
+        SdrObject* pDO(pSO->CloneSdrObject(rTargetSdrModel));
+
+        if(nullptr != pDO)
+        {
+            NbcInsertObject(pDO, SAL_MAX_SIZE);
+        }
+        else
+        {
+            nCloneErrCnt++;
+        }
+    }
+
+    // and now for the Connectors
+    // The new objects would be shown in the rSrcList
+    // and then the object connections are made.
+    // Similar implementation are setup as the following:
+    //    void SdrObjList::CopyObjects(const SdrObjList& rSrcList)
+    //    SdrModel* SdrExchangeView::CreateMarkedObjModel() const
+    //    BOOL SdrExchangeView::Paste(const SdrModel& rMod,...)
+    //    void SdrEditView::CopyMarked()
+    if (nCloneErrCnt==0) {
+        for (size_t no=0; no<nCount; ++no) {
+            const SdrObject* pSrcOb=rSrcList.GetObj(no);
+            const SdrEdgeObj* pSrcEdge=dynamic_cast<const SdrEdgeObj*>( pSrcOb );
+            if (pSrcEdge!=nullptr) {
+                SdrObject* pSrcNode1=pSrcEdge->GetConnectedNode(true);
+                SdrObject* pSrcNode2=pSrcEdge->GetConnectedNode(false);
+                if (pSrcNode1!=nullptr && pSrcNode1->getParentSdrObjListFromSdrObject()!=pSrcEdge->getParentSdrObjListFromSdrObject()) pSrcNode1=nullptr; // can't do this
+                if (pSrcNode2!=nullptr && pSrcNode2->getParentSdrObjListFromSdrObject()!=pSrcEdge->getParentSdrObjListFromSdrObject()) pSrcNode2=nullptr; // across all lists (yet)
+                if (pSrcNode1!=nullptr || pSrcNode2!=nullptr) {
+                    SdrObject* pEdgeObjTmp=GetObj(no);
+                    SdrEdgeObj* pDstEdge=dynamic_cast<SdrEdgeObj*>( pEdgeObjTmp );
+                    if (pDstEdge!=nullptr) {
+                        if (pSrcNode1!=nullptr) {
+                            sal_uInt32 nDstNode1=pSrcNode1->GetOrdNum();
+                            SdrObject* pDstNode1=GetObj(nDstNode1);
+                            if (pDstNode1!=nullptr) { // else we get an error!
+                                pDstEdge->ConnectToNode(true,pDstNode1);
+                            } else {
+                                OSL_FAIL("SdrObjList::operator=(): pDstNode1==NULL!");
+                            }
+                        }
+                        if (pSrcNode2!=nullptr) {
+                            sal_uInt32 nDstNode2=pSrcNode2->GetOrdNum();
+                            SdrObject* pDstNode2=GetObj(nDstNode2);
+                            if (pDstNode2!=nullptr) { // else the node was probably not selected
+                                pDstEdge->ConnectToNode(false,pDstNode2);
+                            } else {
+                                OSL_FAIL("SdrObjList::operator=(): pDstNode2==NULL!");
+                            }
+                        }
+                    } else {
+                        OSL_FAIL("SdrObjList::operator=(): pDstEdge==NULL!");
+                    }
+                }
+            }
+        }
+    } else {
+#ifdef DBG_UTIL
+        OStringBuffer aStr("SdrObjList::operator=(): Error when cloning ");
+
+        if(nCloneErrCnt == 1)
+        {
+            aStr.append("a drawing object.");
+        }
+        else
+        {
+            aStr.append(static_cast<sal_Int32>(nCloneErrCnt));
+            aStr.append(" drawing objects.");
+        }
+
+        aStr.append(" Not copying connectors.");
+
+        OSL_FAIL(aStr.getStr());
+#endif
+    }
+}
+
+void SdrObjList::RecalcObjOrdNums()
+{
+    const size_t nCount = GetObjCount();
+    for (size_t no=0; no<nCount; ++no) {
+        SdrObject* pObj=GetObj(no);
+        pObj->SetOrdNum(no);
+    }
+    mbObjOrdNumsDirty=false;
+}
+
+void SdrObjList::RecalcRects()
+{
+    maSdrObjListOutRect=tools::Rectangle();
+    maSdrObjListSnapRect=maSdrObjListOutRect;
+    const size_t nCount = GetObjCount();
+    for (size_t i=0; i<nCount; ++i) {
+        SdrObject* pObj=GetObj(i);
+        if (i==0) {
+            maSdrObjListOutRect=pObj->GetCurrentBoundRect();
+            maSdrObjListSnapRect=pObj->GetSnapRect();
+        } else {
+            maSdrObjListOutRect.Union(pObj->GetCurrentBoundRect());
+            maSdrObjListSnapRect.Union(pObj->GetSnapRect());
+        }
+    }
+}
+
+void SdrObjList::SetSdrObjListRectsDirty()
+{
+    mbRectsDirty=true;
+    SdrObject* pParentSdrObject(getSdrObjectFromSdrObjList());
+
+    if(nullptr != pParentSdrObject)
+    {
+        pParentSdrObject->SetRectsDirty();
+    }
+}
+
+void SdrObjList::impChildInserted(SdrObject const & rChild)
+{
+    sdr::contact::ViewContact* pParent = rChild.GetViewContact().GetParentContact();
+
+    if(pParent)
+    {
+        pParent->ActionChildInserted(rChild.GetViewContact());
+    }
+}
+
+void SdrObjList::NbcInsertObject(SdrObject* pObj, size_t nPos)
+{
+    DBG_ASSERT(pObj!=nullptr,"SdrObjList::NbcInsertObject(NULL)");
+    if (pObj==nullptr)
+        return;
+
+    DBG_ASSERT(!pObj->IsInserted(),"The object already has the status Inserted.");
+    const size_t nCount = GetObjCount();
+    if (nPos>nCount) nPos=nCount;
+    InsertObjectIntoContainer(*pObj,nPos);
+
+    if (nPos<nCount) mbObjOrdNumsDirty=true;
+    pObj->SetOrdNum(nPos);
+    SetParentAtSdrObjectFromSdrObjList(*pObj, this);
+
+    // Inform the parent about change to allow invalidations at
+    // evtl. existing parent visualisations
+    impChildInserted(*pObj);
+
+    if (!mbRectsDirty) {
+        mbRectsDirty = true;
+    }
+    pObj->InsertedStateChange(); // calls the UserCall (among others)
+}
+
+void SdrObjList::InsertObjectThenMakeNameUnique(SdrObject* pObj)
+{
+    std::unordered_set<rtl::OUString> aNameSet;
+    InsertObjectThenMakeNameUnique(pObj, aNameSet);
+}
+
+void SdrObjList::InsertObjectThenMakeNameUnique(SdrObject* pObj, std::unordered_set<OUString>& rNameSet, size_t nPos)
+{
+    InsertObject(pObj, nPos);
+    if (!pObj->GetName().isEmpty())
+    {
+        pObj->MakeNameUnique(rNameSet);
+        SdrObjList* pSdrObjList = pObj->GetSubList(); // group
+        if (pSdrObjList)
+        {
+            SdrObject* pListObj;
+            SdrObjListIter aIter(pSdrObjList, SdrIterMode::DeepWithGroups);
+            while (aIter.IsMore())
+            {
+                pListObj = aIter.Next();
+                pListObj->MakeNameUnique(rNameSet);
+            }
+        }
+    }
+}
+
+void SdrObjList::InsertObject(SdrObject* pObj, size_t nPos)
+{
+    DBG_ASSERT(pObj!=nullptr,"SdrObjList::InsertObject(NULL)");
+
+    if(pObj)
+    {
+        // if anchor is used, reset it before grouping
+        if(getSdrObjectFromSdrObjList())
+        {
+            const Point& rAnchorPos = pObj->GetAnchorPos();
+            if(rAnchorPos.X() || rAnchorPos.Y())
+                pObj->NbcSetAnchorPos(Point());
+        }
+
+        // do insert to new group
+        NbcInsertObject(pObj, nPos);
+
+        // In case the object is inserted into a group and doesn't overlap with
+        // the group's other members, it needs an own repaint.
+        SdrObject* pParentSdrObject(getSdrObjectFromSdrObjList());
+
+        if(pParentSdrObject)
+        {
+            // only repaint here
+            pParentSdrObject->ActionChanged();
+        }
+
+        // TODO: We need a different broadcast here!
+        // Repaint from object number ... (heads-up: GroupObj)
+        if(pObj->getSdrPageFromSdrObject())
+        {
+            SdrHint aHint(SdrHintKind::ObjectInserted, *pObj);
+            pObj->getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+
+        pObj->getSdrModelFromSdrObject().SetChanged();
+    }
+}
+
+SdrObject* SdrObjList::NbcRemoveObject(size_t nObjNum)
+{
+    if (nObjNum >= maList.size())
+    {
+        OSL_ASSERT(nObjNum<maList.size());
+        return nullptr;
+    }
+
+    const size_t nCount = GetObjCount();
+    SdrObject* pObj=maList[nObjNum];
+    RemoveObjectFromContainer(nObjNum);
+
+    DBG_ASSERT(pObj!=nullptr,"Could not find object to remove.");
+    if (pObj!=nullptr)
+    {
+        // flushViewObjectContacts() clears the VOC's and those invalidate
+        pObj->GetViewContact().flushViewObjectContacts();
+
+        DBG_ASSERT(pObj->IsInserted(),"The object does not have the status Inserted.");
+
+        // tdf#121022 Do first remove from SdrObjList - InsertedStateChange
+        // relies now on IsInserted which uses getParentSdrObjListFromSdrObject
+        SetParentAtSdrObjectFromSdrObjList(*pObj, nullptr);
+
+        // calls UserCall, among other
+        pObj->InsertedStateChange();
+
+        if (!mbObjOrdNumsDirty)
+        {
+            // optimizing for the case that the last object has to be removed
+            if (nObjNum+1!=nCount) {
+                mbObjOrdNumsDirty=true;
+            }
+        }
+        SetSdrObjListRectsDirty();
+    }
+    return pObj;
+}
+
+SdrObject* SdrObjList::RemoveObject(size_t nObjNum)
+{
+    if (nObjNum >= maList.size())
+    {
+        OSL_ASSERT(nObjNum<maList.size());
+        return nullptr;
+    }
+
+    const size_t nCount = GetObjCount();
+    SdrObject* pObj=maList[nObjNum];
+    RemoveObjectFromContainer(nObjNum);
+
+    DBG_ASSERT(pObj!=nullptr,"Object to remove not found.");
+    if(pObj)
+    {
+        // flushViewObjectContacts() clears the VOC's and those invalidate
+        pObj->GetViewContact().flushViewObjectContacts();
+        DBG_ASSERT(pObj->IsInserted(),"The object does not have the status Inserted.");
+
+        // TODO: We need a different broadcast here.
+        if (pObj->getSdrPageFromSdrObject()!=nullptr)
+        {
+            SdrHint aHint(SdrHintKind::ObjectRemoved, *pObj);
+            pObj->getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+
+        pObj->getSdrModelFromSdrObject().SetChanged();
+
+        // tdf#121022 Do first remove from SdrObjList - InsertedStateChange
+        // relies now on IsInserted which uses getParentSdrObjListFromSdrObject
+        SetParentAtSdrObjectFromSdrObjList(*pObj, nullptr);
+
+        // calls, among other things, the UserCall
+        pObj->InsertedStateChange();
+
+        if (!mbObjOrdNumsDirty)
+        {
+            // optimization for the case that the last object is removed
+            if (nObjNum+1!=nCount) {
+                mbObjOrdNumsDirty=true;
+            }
+        }
+
+        SetSdrObjListRectsDirty();
+        SdrObject* pParentSdrObject(getSdrObjectFromSdrObjList());
+
+        if(pParentSdrObject && !GetObjCount())
+        {
+            // empty group created; it needs to be repainted since it's
+            // visualization changes
+            pParentSdrObject->ActionChanged();
+        }
+    }
+    return pObj;
+}
+
+SdrObject* SdrObjList::ReplaceObject(SdrObject* pNewObj, size_t nObjNum)
+{
+    if (nObjNum >= maList.size())
+    {
+        OSL_ASSERT(nObjNum<maList.size());
+        return nullptr;
+    }
+    if (pNewObj == nullptr)
+    {
+        OSL_ASSERT(pNewObj!=nullptr);
+        return nullptr;
+    }
+
+    SdrObject* pObj=maList[nObjNum];
+    DBG_ASSERT(pObj!=nullptr,"SdrObjList::ReplaceObject: Could not find object to remove.");
+    if (pObj!=nullptr) {
+        DBG_ASSERT(pObj->IsInserted(),"SdrObjList::ReplaceObject: the object does not have status Inserted.");
+
+        // TODO: We need a different broadcast here.
+        if (pObj->getSdrPageFromSdrObject()!=nullptr)
+        {
+            SdrHint aHint(SdrHintKind::ObjectRemoved, *pObj);
+            pObj->getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+
+        // Change parent and replace in SdrObjList
+        SetParentAtSdrObjectFromSdrObjList(*pObj, nullptr);
+        ReplaceObjectInContainer(*pNewObj,nObjNum);
+
+        // tdf#121022 InsertedStateChange uses the parent
+        // to detect if pObj is inserted or not, so have to call
+        // it *after* changing these settings, else an obviously wrong
+        // 'SdrUserCallType::Inserted' would be sent
+        pObj->InsertedStateChange();
+
+        // flushViewObjectContacts() clears the VOC's and those
+        // trigger the evtl. needed invalidate(s)
+        pObj->GetViewContact().flushViewObjectContacts();
+
+        // Setup data at new SdrObject - it already *is* inserted to
+        // the SdrObjList due to 'ReplaceObjectInContainer' above
+        pNewObj->SetOrdNum(nObjNum);
+        SetParentAtSdrObjectFromSdrObjList(*pNewObj, this);
+
+        // Inform the parent about change to allow invalidations at
+        // evtl. existing parent visualisations, but also react on
+        // newly inserted SdrObjects (as e.g. GraphCtrlUserCall does)
+        impChildInserted(*pNewObj);
+
+        pNewObj->InsertedStateChange();
+
+        // TODO: We need a different broadcast here.
+        if (pNewObj->getSdrPageFromSdrObject()!=nullptr) {
+            SdrHint aHint(SdrHintKind::ObjectInserted, *pNewObj);
+            pNewObj->getSdrModelFromSdrObject().Broadcast(aHint);
+        }
+
+        pNewObj->getSdrModelFromSdrObject().SetChanged();
+
+        SetSdrObjListRectsDirty();
+    }
+    return pObj;
+}
+
+SdrObject* SdrObjList::SetObjectOrdNum(size_t nOldObjNum, size_t nNewObjNum)
+{
+    if (nOldObjNum >= maList.size() || nNewObjNum >= maList.size())
+    {
+        OSL_ASSERT(nOldObjNum<maList.size());
+        OSL_ASSERT(nNewObjNum<maList.size());
+        return nullptr;
+    }
+
+    SdrObject* pObj=maList[nOldObjNum];
+    if (nOldObjNum==nNewObjNum) return pObj;
+    DBG_ASSERT(pObj!=nullptr,"SdrObjList::SetObjectOrdNum: Object not found.");
+    if (pObj!=nullptr) {
+        DBG_ASSERT(pObj->IsInserted(),"SdrObjList::SetObjectOrdNum: the object does not have status Inserted.");
+        RemoveObjectFromContainer(nOldObjNum);
+        InsertObjectIntoContainer(*pObj,nNewObjNum);
+
+        // No need to delete visualisation data since same object
+        // gets inserted again. Also a single ActionChanged is enough
+        pObj->ActionChanged();
+
+        pObj->SetOrdNum(nNewObjNum);
+        mbObjOrdNumsDirty=true;
+
+        // TODO: We need a different broadcast here.
+        if (pObj->getSdrPageFromSdrObject()!=nullptr)
+            pObj->getSdrModelFromSdrObject().Broadcast(SdrHint(SdrHintKind::ObjectChange, *pObj));
+        pObj->getSdrModelFromSdrObject().SetChanged();
+    }
+    return pObj;
+}
+
+void SdrObjList::sort( std::vector<sal_Int32>& sortOrder)
+{
+    // no negative indexes and indexes larger than maList size are allowed
+    auto it = std::find_if( sortOrder.begin(), sortOrder.end(), [this](const sal_Int32& rIt)
+         { return ( rIt < 0 || o3tl::make_unsigned(rIt) >= maList.size() ); } );
+    if ( it != sortOrder.end())
+        throw css::lang::IllegalArgumentException("negative index of shape", nullptr, 1);
+
+    // no duplicates
+    std::vector<bool> aNoDuplicates(sortOrder.size(), false);
+    for (size_t i = 0; i < sortOrder.size(); ++i )
+    {
+        size_t idx =  static_cast<size_t>( sortOrder[i] );
+
+        if ( aNoDuplicates[idx] )
+            throw css::lang::IllegalArgumentException("duplicate index of shape", nullptr, 2);
+
+        aNoDuplicates[idx] = true;
+    }
+
+    // example sortOrder [2 0 1]
+    // example maList [T T S T T] ( T T = shape with textbox, S = just a shape )
+    // (shapes at positions 0 and 2 have a textbox)
+
+    std::vector<SdrObject*> aNewList(maList.size());
+    std::set<sal_Int32> aShapesWithTextbox;
+    std::vector<sal_Int32> aIncrements;
+    std::vector<sal_Int32> aDuplicates;
+
+    if ( maList.size() > 1)
+    {
+        for (size_t i = 1; i< maList.size(); ++i)
+        {
+            // if this shape is a textbox, then look at its left neighbour
+            // (shape this textbox is in)
+            // and insert the number of textboxes to the left of it
+            if (maList[i]->IsTextBox())
+              aShapesWithTextbox.insert( i - 1 - aShapesWithTextbox.size() );
+        }
+        // example aShapesWithTextbox [0 2]
+    }
+
+    if (aShapesWithTextbox.size() != maList.size() - sortOrder.size())
+    {
+        throw lang::IllegalArgumentException("mismatch of no. of shapes", nullptr, 0);
+    }
+
+    for (size_t i = 0; i< sortOrder.size(); ++i)
+    {
+
+         if (aShapesWithTextbox.count(sortOrder[i]) > 0)
+             aDuplicates.push_back(sortOrder[i]);
+
+         aDuplicates.push_back(sortOrder[i]);
+
+         // example aDuplicates [2 2 0 0 1]
+    }
+    assert(aDuplicates.size() == maList.size());
+
+    aIncrements.push_back(0);
+    for (size_t i = 1; i< sortOrder.size(); ++i)
+    {
+         if (aShapesWithTextbox.count(i - 1))
+             aIncrements.push_back(aIncrements[i-1] + 1 );
+         else
+             aIncrements.push_back(aIncrements[i-1]);
+
+         // example aIncrements [0 1 1]
+    }
+    assert(aIncrements.size() == sortOrder.size());
+
+    std::vector<sal_Int32> aNewSortOrder(maList.size());
+    sal_Int32 nPrev = -1;
+    for (size_t i = 0; i< aDuplicates.size(); ++i)
+    {
+        if (nPrev != aDuplicates[i])
+            aNewSortOrder[i] = aDuplicates[i] + aIncrements[aDuplicates[i]];
+        else
+            aNewSortOrder[i] = aNewSortOrder[i-1] + 1;
+
+        nPrev = aDuplicates[i];
+
+        // example aNewSortOrder [3 4 0 1 2]
+    }
+    assert(aNewSortOrder.size() == maList.size());
+
+#ifndef NDEBUG
+    {
+        std::vector<sal_Int32> tmp(aNewSortOrder);
+        std::sort(tmp.begin(), tmp.end());
+        for (size_t i = 0; i < tmp.size(); ++i)
+        {
+            assert(size_t(tmp[i]) == i);
+        }
+    }
+#endif
+
+    for (size_t i = 0; i < aNewSortOrder.size(); ++i)
+    {
+        aNewList[i] = maList[ aNewSortOrder[i] ];
+        aNewList[i]->SetOrdNum(i);
+    }
+
+    std::swap(aNewList, maList);
+}
+
+const tools::Rectangle& SdrObjList::GetAllObjSnapRect() const
+{
+    if (mbRectsDirty) {
+        const_cast<SdrObjList*>(this)->RecalcRects();
+        const_cast<SdrObjList*>(this)->mbRectsDirty=false;
+    }
+    return maSdrObjListSnapRect;
+}
+
+const tools::Rectangle& SdrObjList::GetAllObjBoundRect() const
+{
+    // #i106183# for deep group hierarchies like in chart2, the invalidates
+    // through the hierarchy are not correct; use a 2nd hint for the needed
+    // recalculation. Future versions will have no bool flag at all, but
+    // just maSdrObjListOutRect in empty state to represent an invalid state, thus
+    // it's a step in the right direction.
+    if (mbRectsDirty || maSdrObjListOutRect.IsEmpty())
+    {
+        const_cast<SdrObjList*>(this)->RecalcRects();
+        const_cast<SdrObjList*>(this)->mbRectsDirty=false;
+    }
+    return maSdrObjListOutRect;
+}
+
+void SdrObjList::NbcReformatAllTextObjects()
+{
+    size_t nCount=GetObjCount();
+    size_t nNum=0;
+
+    while (nNum<nCount)
+    {
+        SdrObject* pObj = GetObj(nNum);
+
+        pObj->NbcReformatText();
+        nCount=GetObjCount();             // ReformatText may delete an object
+        nNum++;
+    }
+
+}
+
+void SdrObjList::ReformatAllTextObjects()
+{
+    NbcReformatAllTextObjects();
+}
+
+/** steps over all available objects and reformats all
+    edge objects that are connected to other objects so that
+    they may reposition themselves.
+*/
+void SdrObjList::ReformatAllEdgeObjects()
+{
+    // #i120437# go over whole hierarchy, not only over object level null (seen from grouping)
+    SdrObjListIter aIter(this, SdrIterMode::DeepNoGroups);
+
+    while(aIter.IsMore())
+    {
+        SdrObject* pObj = aIter.Next();
+        if (pObj->GetObjIdentifier() != OBJ_EDGE)
+            continue;
+
+        SdrEdgeObj* pSdrEdgeObj = static_cast< SdrEdgeObj* >(pObj);
+        pSdrEdgeObj->Reformat();
+    }
+}
+
+void SdrObjList::BurnInStyleSheetAttributes()
+{
+    for(size_t a = 0; a < GetObjCount(); ++a)
+    {
+        GetObj(a)->BurnInStyleSheetAttributes();
+    }
+}
+
+size_t SdrObjList::GetObjCount() const
+{
+    return maList.size();
+}
+
+
+SdrObject* SdrObjList::GetObj(size_t nNum) const
+{
+    return maList[nNum];
+}
+
+
+bool SdrObjList::IsReadOnly() const
+{
+    bool bRet(false);
+    SdrObject* pParentSdrObject(getSdrObjectFromSdrObjList());
+
+    if(nullptr != pParentSdrObject)
+    {
+        SdrPage* pSdrPage(pParentSdrObject->getSdrPageFromSdrObject());
+
+        if(nullptr != pSdrPage)
+        {
+            bRet = pSdrPage->IsReadOnly();
+        }
+    }
+
+    return bRet;
+}
+
+void SdrObjList::FlattenGroups()
+{
+    const size_t nObj = GetObjCount();
+    for( size_t i = nObj; i>0; )
+        UnGroupObj(--i);
+}
+
+void SdrObjList::UnGroupObj( size_t nObjNum )
+{
+    // if the given object is no group, this method is a noop
+    SdrObject* pUngroupObj = GetObj( nObjNum );
+    if( pUngroupObj )
+    {
+        SdrObjList* pSrcLst = pUngroupObj->GetSubList();
+        if( dynamic_cast<const SdrObjGroup*>( pUngroupObj) !=  nullptr && pSrcLst )
+        {
+            SdrObjGroup* pUngroupGroup = static_cast< SdrObjGroup* > (pUngroupObj);
+
+            // ungroup recursively (has to be head recursion,
+            // otherwise our indices will get trashed when doing it in
+            // the loop)
+            pSrcLst->FlattenGroups();
+
+            // the position at which we insert the members of rUngroupGroup
+            size_t nInsertPos( pUngroupGroup->GetOrdNum() );
+
+            const size_t nCount = pSrcLst->GetObjCount();
+            for( size_t i=0; i<nCount; ++i )
+            {
+                SdrObject* pObj = pSrcLst->RemoveObject(0);
+                InsertObject(pObj, nInsertPos);
+                ++nInsertPos;
+            }
+
+            RemoveObject(nInsertPos);
+        }
+    }
+#ifdef DBG_UTIL
+    else
+        OSL_FAIL("SdrObjList::UnGroupObj: object index invalid");
+#endif
+}
+
+bool SdrObjList::HasObjectNavigationOrder() const { return mxNavigationOrder != nullptr; }
+
+void SdrObjList::SetObjectNavigationPosition (
+    SdrObject& rObject,
+    const sal_uInt32 nNewPosition)
+{
+    // When the navigation order container has not yet been created then
+    // create one now.  It is initialized with the z-order taken from
+    // maList.
+    if (mxNavigationOrder == nullptr)
+    {
+        mxNavigationOrder.reset(new WeakSdrObjectContainerType(maList.size()));
+        ::std::copy(
+            maList.begin(),
+            maList.end(),
+            mxNavigationOrder->begin());
+    }
+    OSL_ASSERT(mxNavigationOrder != nullptr);
+    OSL_ASSERT( mxNavigationOrder->size() == maList.size());
+
+    tools::WeakReference<SdrObject> aReference (&rObject);
+
+    // Look up the object whose navigation position is to be changed.
+    WeakSdrObjectContainerType::iterator iObject (::std::find(
+        mxNavigationOrder->begin(),
+        mxNavigationOrder->end(),
+        aReference));
+    if (iObject == mxNavigationOrder->end())
+    {
+        // The given object is not a member of the navigation order.
+        return;
+    }
+
+    // Move the object to its new position.
+    const sal_uInt32 nOldPosition = ::std::distance(mxNavigationOrder->begin(), iObject);
+    if (nOldPosition != nNewPosition)
+    {
+        mxNavigationOrder->erase(iObject);
+        sal_uInt32 nInsertPosition (nNewPosition);
+        // Adapt insertion position for the just erased object.
+        if (nNewPosition >= nOldPosition)
+            nInsertPosition -= 1;
+        if (nInsertPosition >= mxNavigationOrder->size())
+            mxNavigationOrder->push_back(aReference);
+        else
+            mxNavigationOrder->insert(mxNavigationOrder->begin()+nInsertPosition, aReference);
+
+        mbIsNavigationOrderDirty = true;
+
+        // The navigation order is written out to file so mark the model as modified.
+        rObject.getSdrModelFromSdrObject().SetChanged();
+    }
+}
+
+
+SdrObject* SdrObjList::GetObjectForNavigationPosition (const sal_uInt32 nNavigationPosition) const
+{
+    if (HasObjectNavigationOrder())
+    {
+        // There is a user defined navigation order. Make sure the object
+        // index is correct and look up the object in mxNavigationOrder.
+        if (nNavigationPosition >= mxNavigationOrder->size())
+        {
+            OSL_ASSERT(nNavigationPosition < mxNavigationOrder->size());
+        }
+        else
+            return (*mxNavigationOrder)[nNavigationPosition].get();
+    }
+    else
+    {
+        // There is no user defined navigation order. Use the z-order
+        // instead.
+        if (nNavigationPosition >= maList.size())
+        {
+            OSL_ASSERT(nNavigationPosition < maList.size());
+        }
+        else
+            return maList[nNavigationPosition];
+    }
+    return nullptr;
+}
+
+
+void SdrObjList::ClearObjectNavigationOrder()
+{
+    mxNavigationOrder.reset();
+    mbIsNavigationOrderDirty = true;
+}
+
+
+bool SdrObjList::RecalcNavigationPositions()
+{
+    if (mbIsNavigationOrderDirty)
+    {
+        if (mxNavigationOrder != nullptr)
+        {
+            mbIsNavigationOrderDirty = false;
+
+            sal_uInt32 nIndex (0);
+            for (auto& rpObject : *mxNavigationOrder)
+            {
+                rpObject->SetNavigationPosition(nIndex);
+                ++nIndex;
+            }
+        }
+    }
+
+    return mxNavigationOrder != nullptr;
+}
+
+
+void SdrObjList::SetNavigationOrder (const uno::Reference<container::XIndexAccess>& rxOrder)
+{
+    if (rxOrder.is())
+    {
+        const sal_Int32 nCount = rxOrder->getCount();
+        if (static_cast<sal_uInt32>(nCount) != maList.size())
+            return;
+
+        if (mxNavigationOrder == nullptr)
+            mxNavigationOrder.reset(new WeakSdrObjectContainerType(nCount));
+
+        for (sal_Int32 nIndex=0; nIndex<nCount; ++nIndex)
+        {
+            uno::Reference<uno::XInterface> xShape (rxOrder->getByIndex(nIndex), uno::UNO_QUERY);
+            SdrObject* pObject = SdrObject::getSdrObjectFromXShape(xShape);
+            if (pObject == nullptr)
+                break;
+            (*mxNavigationOrder)[nIndex] = pObject;
+        }
+
+        mbIsNavigationOrderDirty = true;
+    }
+    else
+    {
+        ClearObjectNavigationOrder();
+    }
+}
+
+
+void SdrObjList::InsertObjectIntoContainer (
+    SdrObject& rObject,
+    const sal_uInt32 nInsertPosition)
+{
+    OSL_ASSERT(nInsertPosition<=maList.size());
+
+    // Update the navigation positions.
+    if (HasObjectNavigationOrder())
+    {
+        // The new object does not have a user defined position so append it
+        // to the list.
+        rObject.SetNavigationPosition(mxNavigationOrder->size());
+        mxNavigationOrder->push_back(&rObject);
+    }
+
+    // Insert object into object list.  Because the insert() method requires
+    // a valid iterator as insertion position, we have to use push_back() to
+    // insert at the end of the list.
+    if (nInsertPosition >= maList.size())
+        maList.push_back(&rObject);
+    else
+        maList.insert(maList.begin()+nInsertPosition, &rObject);
+    mbObjOrdNumsDirty=true;
+}
+
+
+void SdrObjList::ReplaceObjectInContainer (
+    SdrObject& rNewObject,
+    const sal_uInt32 nObjectPosition)
+{
+    if (nObjectPosition >= maList.size())
+    {
+        OSL_ASSERT(nObjectPosition<maList.size());
+        return;
+    }
+
+    // Update the navigation positions.
+    if (HasObjectNavigationOrder())
+    {
+        // A user defined position of the object that is to be replaced is
+        // not transferred to the new object so erase the former and append
+        // the later object from/to the navigation order.
+        OSL_ASSERT(nObjectPosition < maList.size());
+        tools::WeakReference<SdrObject> aReference (maList[nObjectPosition]);
+        WeakSdrObjectContainerType::iterator iObject (::std::find(
+            mxNavigationOrder->begin(),
+            mxNavigationOrder->end(),
+            aReference));
+        if (iObject != mxNavigationOrder->end())
+            mxNavigationOrder->erase(iObject);
+
+        mxNavigationOrder->push_back(&rNewObject);
+
+        mbIsNavigationOrderDirty = true;
+    }
+
+    maList[nObjectPosition] = &rNewObject;
+    mbObjOrdNumsDirty=true;
+}
+
+
+void SdrObjList::RemoveObjectFromContainer (
+    const sal_uInt32 nObjectPosition)
+{
+    if (nObjectPosition >= maList.size())
+    {
+        OSL_ASSERT(nObjectPosition<maList.size());
+        return;
+    }
+
+    // Update the navigation positions.
+    if (HasObjectNavigationOrder())
+    {
+        tools::WeakReference<SdrObject> aReference (maList[nObjectPosition]);
+        WeakSdrObjectContainerType::iterator iObject (::std::find(
+            mxNavigationOrder->begin(),
+            mxNavigationOrder->end(),
+            aReference));
+        if (iObject != mxNavigationOrder->end())
+            mxNavigationOrder->erase(iObject);
+        mbIsNavigationOrderDirty = true;
+    }
+
+    maList.erase(maList.begin()+nObjectPosition);
+    mbObjOrdNumsDirty=true;
+}
+
+void SdrObjList::dumpAsXml(xmlTextWriterPtr pWriter) const
+{
+    xmlTextWriterStartElement(pWriter, BAD_CAST("SdrObjList"));
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this);
+    xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("symbol"), "%s", BAD_CAST(typeid(*this).name()));
+
+    size_t nObjCount = GetObjCount();
+    for (size_t i = 0; i < nObjCount; ++i)
+    {
+        if (const SdrObject* pObject = GetObj(i))
+            pObject->dumpAsXml(pWriter);
+    }
+
+    xmlTextWriterEndElement(pWriter);
+}
+
+
+void SdrPageGridFrameList::Clear()
+{
+    sal_uInt16 nCount=GetCount();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        delete GetObject(i);
+    }
+    aList.clear();
+}
+
+
+// PageUser section
+
+void SdrPage::AddPageUser(sdr::PageUser& rNewUser)
+{
+    maPageUsers.push_back(&rNewUser);
+}
+
+void SdrPage::RemovePageUser(sdr::PageUser& rOldUser)
+{
+    const sdr::PageUserVector::iterator aFindResult = ::std::find(maPageUsers.begin(), maPageUsers.end(), &rOldUser);
+    if(aFindResult != maPageUsers.end())
+    {
+        maPageUsers.erase(aFindResult);
+    }
+}
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> SdrPage::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfSdrPage>(*this);
+}
+
+const sdr::contact::ViewContact& SdrPage::GetViewContact() const
+{
+    if (!mpViewContact)
+        const_cast<SdrPage*>(this)->mpViewContact =
+            const_cast<SdrPage*>(this)->CreateObjectSpecificViewContact();
+
+    return *mpViewContact;
+}
+
+sdr::contact::ViewContact& SdrPage::GetViewContact()
+{
+    if (!mpViewContact)
+        mpViewContact = CreateObjectSpecificViewContact();
+
+    return *mpViewContact;
+}
+
+void SdrPageProperties::ImpRemoveStyleSheet()
+{
+    if(mpStyleSheet)
+    {
+        EndListening(*mpStyleSheet);
+        maProperties.SetParent(nullptr);
+        mpStyleSheet = nullptr;
+    }
+}
+
+void SdrPageProperties::ImpAddStyleSheet(SfxStyleSheet& rNewStyleSheet)
+{
+    if(mpStyleSheet != &rNewStyleSheet)
+    {
+        ImpRemoveStyleSheet();
+        mpStyleSheet = &rNewStyleSheet;
+        StartListening(rNewStyleSheet);
+        maProperties.SetParent(&rNewStyleSheet.GetItemSet());
+    }
+}
+
+static void ImpPageChange(SdrPage& rSdrPage)
+{
+    rSdrPage.ActionChanged();
+    rSdrPage.getSdrModelFromSdrPage().SetChanged();
+    SdrHint aHint(SdrHintKind::PageOrderChange, &rSdrPage);
+    rSdrPage.getSdrModelFromSdrPage().Broadcast(aHint);
+}
+
+SdrPageProperties::SdrPageProperties(SdrPage& rSdrPage)
+:   SfxListener(),
+    mpSdrPage(&rSdrPage),
+    mpStyleSheet(nullptr),
+    maProperties(
+        mpSdrPage->getSdrModelFromSdrPage().GetItemPool(),
+        svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{})
+{
+    if(!rSdrPage.IsMasterPage())
+    {
+        maProperties.Put(XFillStyleItem(drawing::FillStyle_NONE));
+    }
+}
+
+SdrPageProperties::~SdrPageProperties()
+{
+    ImpRemoveStyleSheet();
+}
+
+void SdrPageProperties::Notify(SfxBroadcaster& /*rBC*/, const SfxHint& rHint)
+{
+    switch(rHint.GetId())
+    {
+        case SfxHintId::DataChanged :
+            {
+                // notify change, broadcast
+                ImpPageChange(*mpSdrPage);
+                break;
+            }
+        case SfxHintId::Dying :
+            {
+                // Style needs to be forgotten
+                ImpRemoveStyleSheet();
+                break;
+            }
+        default: break;
+    }
+}
+
+bool SdrPageProperties::isUsedByModel() const
+{
+    assert(mpSdrPage);
+    return mpSdrPage->IsInserted();
+}
+
+
+void SdrPageProperties::PutItemSet(const SfxItemSet& rSet)
+{
+    OSL_ENSURE(!mpSdrPage->IsMasterPage(), "Item set at MasterPage Attributes (!)");
+    maProperties.Put(rSet);
+    ImpPageChange(*mpSdrPage);
+}
+
+void SdrPageProperties::PutItem(const SfxPoolItem& rItem)
+{
+    OSL_ENSURE(!mpSdrPage->IsMasterPage(), "Item set at MasterPage Attributes (!)");
+    maProperties.Put(rItem);
+    ImpPageChange(*mpSdrPage);
+}
+
+void SdrPageProperties::ClearItem(const sal_uInt16 nWhich)
+{
+    maProperties.ClearItem(nWhich);
+    ImpPageChange(*mpSdrPage);
+}
+
+void SdrPageProperties::SetStyleSheet(SfxStyleSheet* pStyleSheet)
+{
+    if(pStyleSheet)
+    {
+        ImpAddStyleSheet(*pStyleSheet);
+    }
+    else
+    {
+        ImpRemoveStyleSheet();
+    }
+
+    ImpPageChange(*mpSdrPage);
+}
+
+
+SdrPage::SdrPage(SdrModel& rModel, bool bMasterPage)
+:   SdrObjList(),
+    tools::WeakBase(),
+    maPageUsers(),
+    mrSdrModelFromSdrPage(rModel),
+    mnWidth(10),
+    mnHeight(10),
+    mnBorderLeft(0),
+    mnBorderUpper(0),
+    mnBorderRight(0),
+    mnBorderLower(0),
+    mpLayerAdmin(new SdrLayerAdmin(&rModel.GetLayerAdmin())),
+    mxUnoPage(),
+    nPageNum(0),
+    mbMaster(bMasterPage),
+    mbInserted(false),
+    mbObjectsNotPersistent(false),
+    mbPageBorderOnlyLeftRight(false)
+{
+    mpSdrPageProperties.reset(new SdrPageProperties(*this));
+}
+
+SdrPage::~SdrPage()
+{
+    if( mxUnoPage.is() ) try
+    {
+        uno::Reference< lang::XComponent > xPageComponent( mxUnoPage, uno::UNO_QUERY_THROW );
+        mxUnoPage.clear();
+        xPageComponent->dispose();
+    }
+    catch( const uno::Exception& )
+    {
+        DBG_UNHANDLED_EXCEPTION("svx");
+    }
+
+    // tell all the registered PageUsers that the page is in destruction
+    // This causes some (all?) PageUsers to remove themselves from the list
+    // of page users.  Therefore we have to use a copy of the list for the
+    // iteration.
+    sdr::PageUserVector aListCopy (maPageUsers.begin(), maPageUsers.end());
+    for(sdr::PageUser* pPageUser : aListCopy)
+    {
+        DBG_ASSERT(pPageUser, "SdrPage::~SdrPage: corrupt PageUser list (!)");
+        pPageUser->PageInDestruction(*this);
+    }
+
+    // Clear the vector. This means that user do not need to call RemovePageUser()
+    // when they get called from PageInDestruction().
+    maPageUsers.clear();
+
+    mpLayerAdmin.reset();
+
+    TRG_ClearMasterPage();
+
+    mpViewContact.reset();
+    mpSdrPageProperties.reset();
+}
+
+void SdrPage::lateInit(const SdrPage& rSrcPage)
+{
+    assert(!mpViewContact);
+    assert(!mxUnoPage.is());
+
+    // copy all the local parameters to make this instance
+    // a valid copy of source page before copying and inserting
+    // the contained objects
+    mbMaster = rSrcPage.mbMaster;
+    mbPageBorderOnlyLeftRight = rSrcPage.mbPageBorderOnlyLeftRight;
+    mnWidth = rSrcPage.mnWidth;
+    mnHeight = rSrcPage.mnHeight;
+    mnBorderLeft = rSrcPage.mnBorderLeft;
+    mnBorderUpper = rSrcPage.mnBorderUpper;
+    mnBorderRight = rSrcPage.mnBorderRight;
+    mnBorderLower = rSrcPage.mnBorderLower;
+    nPageNum = rSrcPage.nPageNum;
+
+    if(rSrcPage.TRG_HasMasterPage())
+    {
+        TRG_SetMasterPage(rSrcPage.TRG_GetMasterPage());
+        TRG_SetMasterPageVisibleLayers(rSrcPage.TRG_GetMasterPageVisibleLayers());
+    }
+    else
+    {
+        TRG_ClearMasterPage();
+    }
+
+    mbObjectsNotPersistent = rSrcPage.mbObjectsNotPersistent;
+
+    {
+        mpSdrPageProperties.reset(new SdrPageProperties(*this));
+
+        if(!IsMasterPage())
+        {
+            mpSdrPageProperties->PutItemSet(rSrcPage.getSdrPageProperties().GetItemSet());
+        }
+
+        mpSdrPageProperties->SetStyleSheet(rSrcPage.getSdrPageProperties().GetStyleSheet());
+    }
+
+    // Now copy the contained objects
+    if(0 != rSrcPage.GetObjCount())
+    {
+        CopyObjects(rSrcPage);
+    }
+}
+
+SdrPage* SdrPage::CloneSdrPage(SdrModel& rTargetModel) const
+{
+    SdrPage* pClonedPage(new SdrPage(rTargetModel));
+    pClonedPage->lateInit(*this);
+    return pClonedPage;
+}
+
+void SdrPage::SetSize(const Size& aSiz)
+{
+    bool bChanged(false);
+
+    if(aSiz.Width() != mnWidth)
+    {
+        mnWidth = aSiz.Width();
+        bChanged = true;
+    }
+
+    if(aSiz.Height() != mnHeight)
+    {
+        mnHeight = aSiz.Height();
+        bChanged = true;
+    }
+
+    if(bChanged)
+    {
+        SetChanged();
+    }
+}
+
+Size SdrPage::GetSize() const
+{
+    return Size(mnWidth,mnHeight);
+}
+
+sal_Int32 SdrPage::GetWidth() const
+{
+    return mnWidth;
+}
+
+void SdrPage::SetOrientation(Orientation eOri)
+{
+    // square: handle like portrait format
+    Size aSiz(GetSize());
+    if (aSiz.Width()!=aSiz.Height()) {
+        if ((eOri==Orientation::Portrait) == (aSiz.Width()>aSiz.Height())) {
+            // coverity[swapped_arguments : FALSE] - this is in the correct order
+            SetSize(Size(aSiz.Height(),aSiz.Width()));
+        }
+    }
+}
+
+Orientation SdrPage::GetOrientation() const
+{
+    // square: handle like portrait format
+    Orientation eRet=Orientation::Portrait;
+    Size aSiz(GetSize());
+    if (aSiz.Width()>aSiz.Height()) eRet=Orientation::Landscape;
+    return eRet;
+}
+
+sal_Int32 SdrPage::GetHeight() const
+{
+    return mnHeight;
+}
+
+void  SdrPage::SetBorder(sal_Int32 nLft, sal_Int32 nUpp, sal_Int32 nRgt, sal_Int32 nLwr)
+{
+    bool bChanged(false);
+
+    if(mnBorderLeft != nLft)
+    {
+        mnBorderLeft = nLft;
+        bChanged = true;
+    }
+
+    if(mnBorderUpper != nUpp)
+    {
+        mnBorderUpper = nUpp;
+        bChanged = true;
+    }
+
+    if(mnBorderRight != nRgt)
+    {
+        mnBorderRight = nRgt;
+        bChanged = true;
+    }
+
+    if(mnBorderLower != nLwr)
+    {
+        mnBorderLower =  nLwr;
+        bChanged = true;
+    }
+
+    if(bChanged)
+    {
+        SetChanged();
+    }
+}
+
+void  SdrPage::SetLeftBorder(sal_Int32 nBorder)
+{
+    if(mnBorderLeft != nBorder)
+    {
+        mnBorderLeft = nBorder;
+        SetChanged();
+    }
+}
+
+void  SdrPage::SetUpperBorder(sal_Int32 nBorder)
+{
+    if(mnBorderUpper != nBorder)
+    {
+        mnBorderUpper = nBorder;
+        SetChanged();
+    }
+}
+
+void  SdrPage::SetRightBorder(sal_Int32 nBorder)
+{
+    if(mnBorderRight != nBorder)
+    {
+        mnBorderRight=nBorder;
+        SetChanged();
+    }
+}
+
+void  SdrPage::SetLowerBorder(sal_Int32 nBorder)
+{
+    if(mnBorderLower != nBorder)
+    {
+        mnBorderLower=nBorder;
+        SetChanged();
+    }
+}
+
+sal_Int32 SdrPage::GetLeftBorder() const
+{
+    return mnBorderLeft;
+}
+
+sal_Int32 SdrPage::GetUpperBorder() const
+{
+    return mnBorderUpper;
+}
+
+sal_Int32 SdrPage::GetRightBorder() const
+{
+    return mnBorderRight;
+}
+
+sal_Int32 SdrPage::GetLowerBorder() const
+{
+    return mnBorderLower;
+}
+
+// #i68775# React on PageNum changes (from Model in most cases)
+void SdrPage::SetPageNum(sal_uInt16 nNew)
+{
+    if(nNew != nPageNum)
+    {
+        // change
+        nPageNum = nNew;
+
+        // notify visualisations, also notifies e.g. buffered MasterPages
+        ActionChanged();
+    }
+}
+
+sal_uInt16 SdrPage::GetPageNum() const
+{
+    if (!mbInserted)
+        return 0;
+
+    if (mbMaster) {
+        if (getSdrModelFromSdrPage().IsMPgNumsDirty())
+            getSdrModelFromSdrPage().RecalcPageNums(true);
+    } else {
+        if (getSdrModelFromSdrPage().IsPagNumsDirty())
+            getSdrModelFromSdrPage().RecalcPageNums(false);
+    }
+    return nPageNum;
+}
+
+void SdrPage::SetChanged()
+{
+    // For test purposes, use the new ViewContact for change
+    // notification now.
+    ActionChanged();
+    getSdrModelFromSdrPage().SetChanged();
+}
+
+SdrPage* SdrPage::getSdrPageFromSdrObjList() const
+{
+    return const_cast< SdrPage* >(this);
+}
+
+// MasterPage interface
+
+void SdrPage::TRG_SetMasterPage(SdrPage& rNew)
+{
+    if(mpMasterPageDescriptor && &(mpMasterPageDescriptor->GetUsedPage()) == &rNew)
+        return;
+
+    if(mpMasterPageDescriptor)
+        TRG_ClearMasterPage();
+
+    mpMasterPageDescriptor.reset(new sdr::MasterPageDescriptor(*this, rNew));
+    GetViewContact().ActionChanged();
+}
+
+void SdrPage::TRG_ClearMasterPage()
+{
+    if(mpMasterPageDescriptor)
+    {
+        SetChanged();
+
+        // the flushViewObjectContacts() will do needed invalidates by deleting the involved VOCs
+        mpMasterPageDescriptor->GetUsedPage().GetViewContact().flushViewObjectContacts();
+
+        mpMasterPageDescriptor.reset();
+    }
+}
+
+SdrPage& SdrPage::TRG_GetMasterPage() const
+{
+    DBG_ASSERT(mpMasterPageDescriptor != nullptr, "TRG_GetMasterPage(): No MasterPage available. Use TRG_HasMasterPage() before access (!)");
+    return mpMasterPageDescriptor->GetUsedPage();
+}
+
+const SdrLayerIDSet& SdrPage::TRG_GetMasterPageVisibleLayers() const
+{
+    DBG_ASSERT(mpMasterPageDescriptor != nullptr, "TRG_GetMasterPageVisibleLayers(): No MasterPage available. Use TRG_HasMasterPage() before access (!)");
+    return mpMasterPageDescriptor->GetVisibleLayers();
+}
+
+void SdrPage::TRG_SetMasterPageVisibleLayers(const SdrLayerIDSet& rNew)
+{
+    DBG_ASSERT(mpMasterPageDescriptor != nullptr, "TRG_SetMasterPageVisibleLayers(): No MasterPage available. Use TRG_HasMasterPage() before access (!)");
+    mpMasterPageDescriptor->SetVisibleLayers(rNew);
+}
+
+sdr::contact::ViewContact& SdrPage::TRG_GetMasterPageDescriptorViewContact() const
+{
+    DBG_ASSERT(mpMasterPageDescriptor != nullptr, "TRG_GetMasterPageDescriptorViewContact(): No MasterPage available. Use TRG_HasMasterPage() before access (!)");
+    return mpMasterPageDescriptor->GetViewContact();
+}
+
+// used from SdrModel::RemoveMasterPage
+void SdrPage::TRG_ImpMasterPageRemoved(const SdrPage& rRemovedPage)
+{
+    if(TRG_HasMasterPage())
+    {
+        if(&TRG_GetMasterPage() == &rRemovedPage)
+        {
+            TRG_ClearMasterPage();
+        }
+    }
+}
+
+void SdrPage::MakePageObjectsNamesUnique()
+{
+    std::unordered_set<OUString> aNameSet;
+    for (size_t no(0); no < GetObjCount(); ++no)
+    {
+        SdrObject* pObj(GetObj(no));
+        if(nullptr != pObj)
+        {
+            if (!pObj->GetName().isEmpty())
+            {
+                pObj->MakeNameUnique(aNameSet);
+                SdrObjList* pSdrObjList = pObj->GetSubList(); // group
+                if (pSdrObjList)
+                {
+                    SdrObject* pListObj;
+                    SdrObjListIter aIter(pSdrObjList, SdrIterMode::DeepWithGroups);
+                    while (aIter.IsMore())
+                    {
+                        pListObj = aIter.Next();
+                        pListObj->MakeNameUnique(aNameSet);
+                    }
+                }
+            }
+        }
+    }
+}
+
+const SdrPageGridFrameList* SdrPage::GetGridFrameList(const SdrPageView* /*pPV*/, const tools::Rectangle* /*pRect*/) const
+{
+    return nullptr;
+}
+
+const SdrLayerAdmin& SdrPage::GetLayerAdmin() const
+{
+    return *mpLayerAdmin;
+}
+
+SdrLayerAdmin& SdrPage::GetLayerAdmin()
+{
+    return *mpLayerAdmin;
+}
+
+OUString SdrPage::GetLayoutName() const
+{
+    return OUString();
+}
+
+void SdrPage::SetInserted( bool bIns )
+{
+    if( mbInserted != bIns )
+    {
+        mbInserted = bIns;
+
+        // #i120437# go over whole hierarchy, not only over object level null (seen from grouping)
+        SdrObjListIter aIter(this, SdrIterMode::DeepNoGroups);
+
+        while ( aIter.IsMore() )
+        {
+            SdrObject* pObj = aIter.Next();
+            if ( dynamic_cast<const SdrOle2Obj* >(pObj) !=  nullptr )
+            {
+                if( mbInserted )
+                    static_cast<SdrOle2Obj*>(pObj)->Connect();
+                else
+                    static_cast<SdrOle2Obj*>(pObj)->Disconnect();
+            }
+        }
+    }
+}
+
+void SdrPage::SetUnoPage(uno::Reference<drawing::XDrawPage> const& xNewPage)
+{
+    mxUnoPage = xNewPage;
+}
+
+uno::Reference< uno::XInterface > const & SdrPage::getUnoPage()
+{
+    if( !mxUnoPage.is() )
+    {
+        // create one
+        mxUnoPage = createUnoPage();
+    }
+
+    return mxUnoPage;
+}
+
+uno::Reference< uno::XInterface > SdrPage::createUnoPage()
+{
+    css::uno::Reference< css::uno::XInterface > xInt =
+        static_cast<cppu::OWeakObject*>( new SvxFmDrawPage( this ) );
+    return xInt;
+}
+
+SfxStyleSheet* SdrPage::GetTextStyleSheetForObject( SdrObject* pObj ) const
+{
+    return pObj->GetStyleSheet();
+}
+
+/** returns an averaged background color of this page */
+// #i75566# GetBackgroundColor -> GetPageBackgroundColor and bScreenDisplay hint value
+Color SdrPage::GetPageBackgroundColor( SdrPageView const * pView, bool bScreenDisplay ) const
+{
+    Color aColor;
+
+    if(bScreenDisplay && (!pView || pView->GetApplicationDocumentColor() == COL_AUTO))
+    {
+        svtools::ColorConfig aColorConfig;
+        aColor = aColorConfig.GetColorValue( svtools::DOCCOLOR ).nColor;
+    }
+    else
+    {
+        aColor = pView->GetApplicationDocumentColor();
+    }
+
+    const SfxItemSet* pBackgroundFill = &getSdrPageProperties().GetItemSet();
+
+    if(!IsMasterPage() && TRG_HasMasterPage())
+    {
+        if(drawing::FillStyle_NONE == pBackgroundFill->Get(XATTR_FILLSTYLE).GetValue())
+        {
+            pBackgroundFill = &TRG_GetMasterPage().getSdrPageProperties().GetItemSet();
+        }
+    }
+
+    GetDraftFillColor(*pBackgroundFill, aColor);
+
+    return aColor;
+}
+
+/** *deprecated, use GetBackgroundColor with SdrPageView */
+Color SdrPage::GetPageBackgroundColor() const
+// #i75566# GetBackgroundColor -> GetPageBackgroundColor
+{
+    return GetPageBackgroundColor( nullptr );
+}
+
+/** this method returns true if the object from the ViewObjectContact should
+    be visible on this page while rendering.
+    bEdit selects if visibility test is for an editing view or a final render,
+    like printing.
+*/
+bool SdrPage::checkVisibility(
+    const sdr::contact::ViewObjectContact& /*rOriginal*/,
+    const sdr::contact::DisplayInfo& /*rDisplayInfo*/,
+    bool /*bEdit*/)
+{
+    // this will be handled in the application if needed
+    return true;
+}
+
+// DrawContact support: Methods for handling Page changes
+void SdrPage::ActionChanged()
+{
+    // Do necessary ViewContact actions
+    GetViewContact().ActionChanged();
+
+    // #i48535# also handle MasterPage change
+    if(TRG_HasMasterPage())
+    {
+        TRG_GetMasterPageDescriptorViewContact().ActionChanged();
+    }
+}
+
+SdrPageProperties& SdrPage::getSdrPageProperties()
+{
+    return *mpSdrPageProperties;
+}
+
+const SdrPageProperties& SdrPage::getSdrPageProperties() const
+{
+    return *mpSdrPageProperties;
+}
+
+const SdrPageProperties* SdrPage::getCorrectSdrPageProperties() const
+{
+    if(mpMasterPageDescriptor)
+    {
+        return mpMasterPageDescriptor->getCorrectSdrPageProperties();
+    }
+    else
+    {
+        return &getSdrPageProperties();
+    }
+}
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdpagv.cxx b/svx/source/svdraw/svdpagv.cxx
new file mode 100644
index 000000000..480182782
--- /dev/null
+++ b/svx/source/svdraw/svdpagv.cxx
@@ -0,0 +1,881 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdpagv.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdview.hxx>
+
+#include <svx/svdobj.hxx>
+#include <svx/svdogrp.hxx>
+#include <svx/svdtypes.hxx>
+
+#include <svx/sdr/contact/viewobjectcontactredirector.hxx>
+
+#include <algorithm>
+
+#include <svx/sdrpagewindow.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <comphelper/lok.hxx>
+#include <comphelper/scopeguard.hxx>
+#include <basegfx/range/b2irectangle.hxx>
+
+using namespace ::com::sun::star;
+
+// interface to SdrPageWindow
+
+SdrPageWindow* SdrPageView::FindPageWindow(SdrPaintWindow& rPaintWindow) const
+{
+    for(auto & a : maPageWindows)
+    {
+        if(&(a->GetPaintWindow()) == &rPaintWindow)
+        {
+            return a.get();
+        }
+    }
+
+    return nullptr;
+}
+
+const SdrPageWindow* SdrPageView::FindPatchedPageWindow( const OutputDevice& _rOutDev ) const
+{
+    for ( auto const & pPageWindow : maPageWindows )
+    {
+        const SdrPaintWindow& rPaintWindow( pPageWindow->GetOriginalPaintWindow() ? *pPageWindow->GetOriginalPaintWindow() : pPageWindow->GetPaintWindow() );
+        if ( &rPaintWindow.GetOutputDevice() == &_rOutDev )
+        {
+            return pPageWindow.get();
+        }
+    }
+
+    return nullptr;
+}
+
+SdrPageWindow* SdrPageView::FindPageWindow(const OutputDevice& rOutDev) const
+{
+    for ( auto const & pPageWindow : maPageWindows )
+    {
+        if(&(pPageWindow->GetPaintWindow().GetOutputDevice()) == &rOutDev)
+        {
+            return pPageWindow.get();
+        }
+    }
+
+    return nullptr;
+}
+
+SdrPageWindow* SdrPageView::GetPageWindow(sal_uInt32 nIndex) const
+{
+    return maPageWindows[nIndex].get();
+}
+
+SdrPageView::SdrPageView(SdrPage* pPage1, SdrView& rNewView)
+:   mrView(rNewView),
+    // col_auto color lets the view takes the default SvxColorConfig entry
+    maDocumentColor( COL_AUTO ),
+    maBackgroundColor( COL_AUTO ), // #i48367# also react on autocolor
+    mpPreparedPageWindow(nullptr) // #i72752#
+{
+    mpPage = pPage1;
+
+    if(mpPage)
+    {
+        aPgOrg.setX(mpPage->GetLeftBorder() );
+        aPgOrg.setY(mpPage->GetUpperBorder() );
+    }
+    // For example, in the case of charts, there is a LayerAdmin, but it has no valid values. Therefore
+    // a solution like pLayerAdmin->getVisibleLayersODF(aLayerVisi) is not possible. So use the
+    // generic SetAll() for now.
+    aLayerVisi.SetAll();
+    aLayerPrn.SetAll();
+
+    mbHasMarked = false;
+    mbVisible = false;
+    pCurrentList = nullptr;
+    pCurrentGroup = nullptr;
+    SetCurrentGroupAndList(nullptr, mpPage);
+
+    for(sal_uInt32 a(0); a < rNewView.PaintWindowCount(); a++)
+    {
+        AddPaintWindowToPageView(*rNewView.GetPaintWindow(a));
+    }
+}
+
+SdrPageView::~SdrPageView()
+{
+}
+
+void SdrPageView::AddPaintWindowToPageView(SdrPaintWindow& rPaintWindow)
+{
+    if(!FindPageWindow(rPaintWindow))
+    {
+        maPageWindows.emplace_back(new SdrPageWindow(*this, rPaintWindow));
+    }
+}
+
+void SdrPageView::RemovePaintWindowFromPageView(SdrPaintWindow& rPaintWindow)
+{
+    auto it = std::find_if(maPageWindows.begin(), maPageWindows.end(),
+        [&rPaintWindow](const std::unique_ptr<SdrPageWindow>& rpWindow) {
+            return &(rpWindow->GetPaintWindow()) == &rPaintWindow;
+        });
+    if (it != maPageWindows.end())
+        maPageWindows.erase(it);
+}
+
+css::uno::Reference< css::awt::XControlContainer > SdrPageView::GetControlContainer( const OutputDevice& _rDevice ) const
+{
+    css::uno::Reference< css::awt::XControlContainer > xReturn;
+    const SdrPageWindow* pCandidate = FindPatchedPageWindow( _rDevice );
+
+    if ( pCandidate )
+        xReturn = pCandidate->GetControlContainer();
+
+    return xReturn;
+}
+
+void SdrPageView::ModelHasChanged()
+{
+    if (GetCurrentGroup()!=nullptr) CheckCurrentGroup();
+}
+
+bool SdrPageView::IsReadOnly() const
+{
+    return (nullptr == GetPage() || GetView().GetModel()->IsReadOnly() || GetPage()->IsReadOnly() || GetObjList()->IsReadOnly());
+}
+
+void SdrPageView::Show()
+{
+    if(!IsVisible())
+    {
+        mbVisible = true;
+
+        for(sal_uInt32 a(0); a < GetView().PaintWindowCount(); a++)
+        {
+            AddPaintWindowToPageView(*GetView().GetPaintWindow(a));
+        }
+    }
+}
+
+void SdrPageView::Hide()
+{
+    if(IsVisible())
+    {
+        if (!comphelper::LibreOfficeKit::isActive())
+        {
+            InvalidateAllWin();
+        }
+        mbVisible = false;
+        maPageWindows.clear();
+    }
+}
+
+tools::Rectangle SdrPageView::GetPageRect() const
+{
+    if (GetPage()==nullptr) return tools::Rectangle();
+    return tools::Rectangle(Point(),Size(GetPage()->GetWidth()+1,GetPage()->GetHeight()+1));
+}
+
+void SdrPageView::InvalidateAllWin()
+{
+    if(IsVisible() && GetPage())
+    {
+        tools::Rectangle aRect(Point(0,0),Size(GetPage()->GetWidth()+1,GetPage()->GetHeight()+1));
+        aRect.Union(GetPage()->GetAllObjBoundRect());
+        GetView().InvalidateAllWin(aRect);
+    }
+}
+
+
+void SdrPageView::PrePaint()
+{
+    const sal_uInt32 nCount(PageWindowCount());
+
+    for(sal_uInt32 a(0); a < nCount; a++)
+    {
+        SdrPageWindow* pCandidate = GetPageWindow(a);
+
+        if(pCandidate)
+        {
+            pCandidate->PrePaint();
+        }
+    }
+}
+
+void SdrPageView::CompleteRedraw(
+    SdrPaintWindow& rPaintWindow, const vcl::Region& rReg, sdr::contact::ViewObjectContactRedirector* pRedirector )
+{
+    if(GetPage())
+    {
+        SdrPageWindow* pPageWindow = FindPageWindow(rPaintWindow);
+        std::unique_ptr<SdrPageWindow> pTempPageWindow;
+
+        if(!pPageWindow)
+        {
+            // create temp PageWindow
+            pTempPageWindow.reset(new SdrPageWindow(*this, rPaintWindow));
+            pPageWindow = pTempPageWindow.get();
+        }
+
+        // do the redraw
+        pPageWindow->PrepareRedraw(rReg);
+        pPageWindow->RedrawAll(pRedirector);
+    }
+}
+
+
+// #i74769# use SdrPaintWindow directly
+
+void SdrPageView::setPreparedPageWindow(SdrPageWindow* pKnownTarget)
+{
+    // #i72752# remember prepared SdrPageWindow
+    mpPreparedPageWindow = pKnownTarget;
+}
+
+void SdrPageView::DrawLayer(SdrLayerID nID, OutputDevice* pGivenTarget,
+        sdr::contact::ViewObjectContactRedirector* pRedirector,
+        const tools::Rectangle& rRect, basegfx::B2IRectangle const*const pPageFrame)
+{
+    if(GetPage())
+    {
+        if(pGivenTarget)
+        {
+            SdrPageWindow* pKnownTarget = FindPageWindow(*pGivenTarget);
+
+            if(pKnownTarget)
+            {
+                // paint known target
+                pKnownTarget->RedrawLayer(&nID, pRedirector, nullptr);
+            }
+            else
+            {
+                // #i72752# DrawLayer() uses an OutputDevice different from BeginDrawLayer. This happens
+                // e.g. when SW paints a single text line in text edit mode. Try to use it
+                SdrPageWindow* pPreparedTarget = mpPreparedPageWindow;
+
+                if(pPreparedTarget)
+                {
+                    // if we have a prepared target, do not use a new SdrPageWindow since this
+                    // works but is expensive. Just use a temporary PaintWindow
+                    SdrPaintWindow aTemporaryPaintWindow(mrView, *pGivenTarget);
+
+                    // Copy existing paint region to use the same as prepared in BeginDrawLayer
+                    SdrPaintWindow& rExistingPaintWindow = pPreparedTarget->GetPaintWindow();
+                    const vcl::Region& rExistingRegion = rExistingPaintWindow.GetRedrawRegion();
+                    bool bUseRect(false);
+                    if (!rRect.IsEmpty())
+                    {
+                        vcl::Region r(rExistingRegion);
+                        r.Intersect(rRect);
+                        // fdo#74435: FIXME: visibility check broken if empty
+                        if (!r.IsEmpty())
+                            bUseRect = true;
+                    }
+                    if (!bUseRect)
+                        aTemporaryPaintWindow.SetRedrawRegion(rExistingRegion);
+                    else
+                        aTemporaryPaintWindow.SetRedrawRegion(vcl::Region(rRect));
+                    // patch the ExistingPageWindow
+                    auto pPreviousWindow = pPreparedTarget->patchPaintWindow(aTemporaryPaintWindow);
+                    // unpatch window when leaving the scope
+                    const ::comphelper::ScopeGuard aGuard(
+                        [&pPreviousWindow, &pPreparedTarget]() { pPreparedTarget->unpatchPaintWindow(pPreviousWindow); } );
+                    
+                    // redraw the layer
+                    pPreparedTarget->RedrawLayer(&nID, pRedirector, pPageFrame);
+                }
+                else
+                {
+                    OSL_FAIL("SdrPageView::DrawLayer: Creating temporary SdrPageWindow (ObjectContact), this should never be needed (!)");
+
+                    // None of the known OutputDevices is the target of this paint, use
+                    // a temporary SdrPageWindow for this Redraw.
+                    SdrPaintWindow aTemporaryPaintWindow(mrView, *pGivenTarget);
+                    SdrPageWindow aTemporaryPageWindow(*this, aTemporaryPaintWindow);
+
+                    // #i72752#
+                    // Copy existing paint region if other PageWindows exist, this was created by
+                    // PrepareRedraw() from BeginDrawLayer(). Needs to be used e.g. when suddenly SW
+                    // paints into an unknown device other than the view was created for (e.g. VirtualDevice)
+                    if(PageWindowCount())
+                    {
+                        SdrPageWindow* pExistingPageWindow = GetPageWindow(0);
+                        SdrPaintWindow& rExistingPaintWindow = pExistingPageWindow->GetPaintWindow();
+                        const vcl::Region& rExistingRegion = rExistingPaintWindow.GetRedrawRegion();
+                        aTemporaryPaintWindow.SetRedrawRegion(rExistingRegion);
+                    }
+
+                    aTemporaryPageWindow.RedrawLayer(&nID, pRedirector, nullptr);
+                }
+            }
+        }
+        else
+        {
+            // paint in all known windows
+            for(sal_uInt32 a(0); a < PageWindowCount(); a++)
+            {
+                SdrPageWindow* pTarget = GetPageWindow(a);
+                pTarget->RedrawLayer(&nID, pRedirector, nullptr);
+            }
+        }
+    }
+}
+
+void SdrPageView::SetDesignMode( bool _bDesignMode ) const
+{
+    for ( sal_uInt32 i = 0; i < PageWindowCount(); ++i )
+    {
+        const SdrPageWindow& rPageViewWindow = *GetPageWindow(i);
+        rPageViewWindow.SetDesignMode( _bDesignMode );
+    }
+}
+
+
+void SdrPageView::DrawPageViewGrid(OutputDevice& rOut, const tools::Rectangle& rRect, Color aColor)
+{
+    if (GetPage()==nullptr)
+        return;
+
+    long nx1=GetView().maGridBig.Width();
+    long nx2=GetView().maGridFin.Width();
+    long ny1=GetView().maGridBig.Height();
+    long ny2=GetView().maGridFin.Height();
+
+    if (nx1==0) nx1=nx2;
+    if (nx2==0) nx2=nx1;
+    if (ny1==0) ny1=ny2;
+    if (ny2==0) ny2=ny1;
+    if (nx1==0) { nx1=ny1; nx2=ny2; }
+    if (ny1==0) { ny1=nx1; ny2=nx2; }
+    if (nx1<0) nx1=-nx1;
+    if (nx2<0) nx2=-nx2;
+    if (ny1<0) ny1=-ny1;
+    if (ny2<0) ny2=-ny2;
+
+    if (nx1==0)
+        return;
+
+    // no more global output size, use window size instead to decide grid sizes
+    long nScreenWdt = rOut.GetOutputSizePixel().Width();
+
+    long nMinDotPix=2;
+    long nMinLinPix=4;
+
+    if (nScreenWdt>=1600)
+    {
+        nMinDotPix=4;
+        nMinLinPix=8;
+    }
+    else if (nScreenWdt>=1024)
+    {
+        nMinDotPix=3;
+        nMinLinPix=6;
+    }
+    else
+    { // e. g. 640x480
+        nMinDotPix=2;
+        nMinLinPix=4;
+    }
+    Size aMinDotDist(rOut.PixelToLogic(Size(nMinDotPix,nMinDotPix)));
+    Size aMinLinDist(rOut.PixelToLogic(Size(nMinLinPix,nMinLinPix)));
+    bool bHoriSolid=nx2<aMinDotDist.Width();
+    bool bVertSolid=ny2<aMinDotDist.Height();
+    // enlarge line offset (minimum 4 pixels)
+    // enlarge by: *2 *5 *10 *20 *50 *100 ...
+    int nTgl=0;
+    long nVal0=nx1;
+    while (nx1<aMinLinDist.Width())
+    {
+        long a=nx1;
+
+        if (nTgl==0) nx1*=2;
+        if (nTgl==1) nx1=nVal0*5; // => nx1*=2.5
+        if (nTgl==2) nx1*=2;
+
+        nVal0=a;
+        nTgl++; if (nTgl>=3) nTgl=0;
+    }
+    nTgl=0;
+    nVal0=ny1;
+    while (ny1<aMinLinDist.Height())
+    {
+        long a=ny1;
+
+        if (nTgl==0) ny1*=2;
+        if (nTgl==1) ny1=nVal0*5; // => ny1*=2.5
+        if (nTgl==2) ny1*=2;
+
+        nVal0=a;
+        nTgl++;
+
+        if (nTgl>=3) nTgl=0;
+    }
+
+    bool bHoriFine=nx2<nx1;
+    bool bVertFine=ny2<ny1;
+    bool bHoriLines=bHoriSolid || bHoriFine || !bVertFine;
+    bool bVertLines=bVertSolid || bVertFine;
+
+    Color aOriginalLineColor( rOut.GetLineColor() );
+    rOut.SetLineColor( aColor );
+
+    bool bMap0=rOut.IsMapModeEnabled();
+
+    long nWrX=0;
+    long nWrY=0;
+    Point aOrg(aPgOrg);
+    long x1=GetPage()->GetLeftBorder()+1+nWrX;
+    long x2=GetPage()->GetWidth()-GetPage()->GetRightBorder()-1+nWrY;
+    long y1=GetPage()->GetUpperBorder()+1+nWrX;
+    long y2=GetPage()->GetHeight()-GetPage()->GetLowerBorder()-1+nWrY;
+    const SdrPageGridFrameList* pFrames=GetPage()->GetGridFrameList(this,nullptr);
+
+    sal_uInt16 nGridPaintCnt=1;
+    if (pFrames!=nullptr) nGridPaintCnt=pFrames->GetCount();
+    for (sal_uInt16 nGridPaintNum=0; nGridPaintNum<nGridPaintCnt; nGridPaintNum++) {
+        if (pFrames!=nullptr) {
+            const SdrPageGridFrame& rGF=(*pFrames)[nGridPaintNum];
+            nWrX=rGF.GetPaperRect().Left();
+            nWrY=rGF.GetPaperRect().Top();
+            x1=rGF.GetUserArea().Left();
+            x2=rGF.GetUserArea().Right();
+            y1=rGF.GetUserArea().Top();
+            y2=rGF.GetUserArea().Bottom();
+            aOrg=rGF.GetUserArea().TopLeft();
+            aOrg-=rGF.GetPaperRect().TopLeft();
+        }
+        if (!rRect.IsEmpty()) {
+            Size a1PixSiz(rOut.PixelToLogic(Size(1,1)));
+            long nX1Pix=a1PixSiz.Width();  // add 1 pixel of tolerance
+            long nY1Pix=a1PixSiz.Height();
+            if (x1<rRect.Left()  -nX1Pix) x1=rRect.Left()  -nX1Pix;
+            if (x2>rRect.Right() +nX1Pix) x2=rRect.Right() +nX1Pix;
+            if (y1<rRect.Top()   -nY1Pix) y1=rRect.Top()   -nY1Pix;
+            if (y2>rRect.Bottom()+nY1Pix) y2=rRect.Bottom()+nY1Pix;
+        }
+
+        long xBigOrg=aOrg.X()+nWrX;
+        while (xBigOrg>=x1) xBigOrg-=nx1;
+        while (xBigOrg<x1) xBigOrg+=nx1;
+        long xFinOrg=xBigOrg;
+        while (xFinOrg>=x1) xFinOrg-=nx2;
+        while (xFinOrg<x1) xFinOrg+=nx2;
+
+        long yBigOrg=aOrg.Y()+nWrY;
+        while (yBigOrg>=y1) yBigOrg-=ny1;
+        while (yBigOrg<y1) yBigOrg+=ny1;
+        long yFinOrg=yBigOrg;
+        while (yFinOrg>=y1) yFinOrg-=ny2;
+        while (yFinOrg<y1) yFinOrg+=ny2;
+
+        if( x1 <= x2 && y1 <= y2 )
+        {
+            if( bHoriLines )
+            {
+                DrawGridFlags nGridFlags = ( bHoriSolid ? DrawGridFlags::HorzLines : DrawGridFlags::Dots );
+                sal_uInt16 nSteps = sal_uInt16(nx1 / nx2);
+                sal_uInt32 nRestPerStepMul1000 = nSteps ? ( ((nx1 * 1000)/ nSteps) - (nx2 * 1000) ) : 0;
+                sal_uInt32 nStepOffset = 0;
+                sal_uInt16 nPointOffset = 0;
+
+                for(sal_uInt16 a=0;a<nSteps;a++)
+                {
+                    // draw
+                    rOut.DrawGrid(
+                        tools::Rectangle( xFinOrg + (a * nx2) + nPointOffset, yBigOrg, x2, y2 ),
+                        Size( nx1, ny1 ), nGridFlags );
+
+                    // do a step
+                    nStepOffset += nRestPerStepMul1000;
+                    while(nStepOffset >= 1000)
+                    {
+                        nStepOffset -= 1000;
+                        nPointOffset++;
+                    }
+                }
+            }
+
+            if( bVertLines )
+            {
+                DrawGridFlags nGridFlags = ( bVertSolid ? DrawGridFlags::VertLines : DrawGridFlags::Dots );
+                sal_uInt16 nSteps = sal_uInt16(ny1 / ny2);
+                sal_uInt32 nRestPerStepMul1000 = nSteps ? ( ((ny1 * 1000L)/ nSteps) - (ny2 * 1000L) ) : 0;
+                sal_uInt32 nStepOffset = 0;
+                sal_uInt16 nPointOffset = 0;
+
+                for(sal_uInt16 a=0;a<nSteps;a++)
+                {
+                    // draw
+                    rOut.DrawGrid(
+                        tools::Rectangle( xBigOrg, yFinOrg + (a * ny2) + nPointOffset, x2, y2 ),
+                        Size( nx1, ny1 ), nGridFlags );
+
+                    // do a step
+                    nStepOffset += nRestPerStepMul1000;
+                    while(nStepOffset >= 1000)
+                    {
+                        nStepOffset -= 1000;
+                        nPointOffset++;
+                    }
+                }
+            }
+        }
+    }
+
+    rOut.EnableMapMode(bMap0);
+    rOut.SetLineColor(aOriginalLineColor);
+}
+
+void SdrPageView::AdjHdl()
+{
+    GetView().AdjustMarkHdl();
+}
+
+void SdrPageView::SetLayer(const OUString& rName, SdrLayerIDSet& rBS, bool bJa)
+{
+    if(!GetPage())
+        return;
+
+    SdrLayerID nID = GetPage()->GetLayerAdmin().GetLayerID(rName);
+
+    if(SDRLAYER_NOTFOUND != nID)
+        rBS.Set(nID, bJa);
+}
+
+bool SdrPageView::IsLayer(const OUString& rName, const SdrLayerIDSet& rBS) const
+{
+    if(!GetPage())
+        return false;
+
+    bool bRet(false);
+
+    if (!rName.isEmpty())
+    {
+        SdrLayerID nId = GetPage()->GetLayerAdmin().GetLayerID(rName);
+
+        if(SDRLAYER_NOTFOUND != nId)
+        {
+            bRet = rBS.IsSet(nId);
+        }
+    }
+
+    return bRet;
+}
+
+bool SdrPageView::IsObjMarkable(SdrObject const * pObj) const
+{
+    if (!pObj)
+        return false;
+    if (pObj->IsMarkProtect())
+        return false;    // excluded from selection?
+    if (!pObj->IsVisible())
+        return false;    // only visible are selectable
+    if (!pObj->IsInserted())
+        return false;    // Obj deleted?
+    if (auto pObjGroup = dynamic_cast<const SdrObjGroup*>(pObj))
+    {
+        // If object is a Group object, visibility may depend on
+        // multiple layers. If one object is markable, Group is markable.
+        SdrObjList* pObjList = pObjGroup->GetSubList();
+
+        if (pObjList && pObjList->GetObjCount())
+        {
+            for (size_t a = 0; a < pObjList->GetObjCount(); ++a)
+            {
+                SdrObject* pCandidate = pObjList->GetObj(a);
+                // call recursively
+                if (IsObjMarkable(pCandidate))
+                    return true;
+            }
+            return false;
+        }
+        else
+        {
+            // #i43302#
+            // Allow empty groups to be selected to be able to delete them
+            return true;
+        }
+    }
+    if (!pObj->Is3DObj() && pObj->getSdrPageFromSdrObject() != GetPage())
+    {
+        // Obj suddenly in different Page
+        return false;
+    }
+
+    // the layer has to be visible and must not be locked
+    SdrLayerID nL = pObj->GetLayer();
+    if (!aLayerVisi.IsSet(nL))
+        return false;
+    if (aLayerLock.IsSet(nL))
+        return false;
+    return true;
+}
+
+void SdrPageView::SetPageOrigin(const Point& rOrg)
+{
+    if (rOrg!=aPgOrg) {
+        aPgOrg=rOrg;
+        if (GetView().IsGridVisible()) {
+            InvalidateAllWin();
+        }
+    }
+}
+
+void SdrPageView::ImpInvalidateHelpLineArea(sal_uInt16 nNum) const
+{
+    if (GetView().IsHlplVisible() && nNum<aHelpLines.GetCount()) {
+        const SdrHelpLine& rHL=aHelpLines[nNum];
+
+        for(sal_uInt32 a(0); a < GetView().PaintWindowCount(); a++)
+        {
+            SdrPaintWindow* pCandidate = GetView().GetPaintWindow(a);
+
+            if(pCandidate->OutputToWindow())
+            {
+                OutputDevice& rOutDev = pCandidate->GetOutputDevice();
+                tools::Rectangle aR(rHL.GetBoundRect(rOutDev));
+                Size aSiz(rOutDev.PixelToLogic(Size(1,1)));
+                aR.AdjustLeft( -(aSiz.Width()) );
+                aR.AdjustRight(aSiz.Width() );
+                aR.AdjustTop( -(aSiz.Height()) );
+                aR.AdjustBottom(aSiz.Height() );
+                const_cast<SdrView&>(GetView()).InvalidateOneWin(rOutDev, aR);
+            }
+        }
+    }
+}
+
+void SdrPageView::SetHelpLines(const SdrHelpLineList& rHLL)
+{
+    aHelpLines=rHLL;
+    InvalidateAllWin();
+}
+
+void SdrPageView::SetHelpLine(sal_uInt16 nNum, const SdrHelpLine& rNewHelpLine)
+{
+    if (nNum<aHelpLines.GetCount() && aHelpLines[nNum]!=rNewHelpLine) {
+        bool bNeedRedraw = true;
+        if (aHelpLines[nNum].GetKind()==rNewHelpLine.GetKind()) {
+            switch (rNewHelpLine.GetKind()) {
+                case SdrHelpLineKind::Vertical  : if (aHelpLines[nNum].GetPos().X()==rNewHelpLine.GetPos().X()) bNeedRedraw = false; break;
+                case SdrHelpLineKind::Horizontal: if (aHelpLines[nNum].GetPos().Y()==rNewHelpLine.GetPos().Y()) bNeedRedraw = false; break;
+                default: break;
+            } // switch
+        }
+        if (bNeedRedraw) ImpInvalidateHelpLineArea(nNum);
+        aHelpLines[nNum]=rNewHelpLine;
+        if (bNeedRedraw) ImpInvalidateHelpLineArea(nNum);
+    }
+}
+
+void SdrPageView::DeleteHelpLine(sal_uInt16 nNum)
+{
+    if (nNum<aHelpLines.GetCount()) {
+        ImpInvalidateHelpLineArea(nNum);
+        aHelpLines.Delete(nNum);
+    }
+}
+
+void SdrPageView::InsertHelpLine(const SdrHelpLine& rHL)
+{
+    sal_uInt16 nNum = aHelpLines.GetCount();
+    aHelpLines.Insert(rHL,nNum);
+    if (GetView().IsHlplVisible())
+        ImpInvalidateHelpLineArea(nNum);
+}
+
+// set current group and list
+void SdrPageView::SetCurrentGroupAndList(SdrObject* pNewGroup, SdrObjList* pNewList)
+{
+    if(pCurrentGroup != pNewGroup)
+    {
+        pCurrentGroup = pNewGroup;
+    }
+    if(pCurrentList != pNewList)
+    {
+        pCurrentList = pNewList;
+    }
+}
+
+bool SdrPageView::EnterGroup(SdrObject* pObj)
+{
+    bool bRet(false);
+
+    if(pObj && pObj->IsGroupObject())
+    {
+        bool bGlueInvalidate(GetView().ImpIsGlueVisible());
+
+        if(bGlueInvalidate)
+        {
+            GetView().GlueInvalidate();
+        }
+
+        // deselect all
+        GetView().UnmarkAll();
+
+        // set current group and list
+        SdrObjList* pNewObjList = pObj->GetSubList();
+        SetCurrentGroupAndList(pObj, pNewObjList);
+
+        // select contained object if only one object is contained,
+        // else select nothing and let the user decide what to do next
+        if(pNewObjList && pNewObjList->GetObjCount() == 1)
+        {
+            SdrObject* pFirstObject = pNewObjList->GetObj(0);
+
+            if(GetView().GetSdrPageView())
+            {
+                GetView().MarkObj(pFirstObject, GetView().GetSdrPageView());
+            }
+        }
+
+        // build new handles
+        GetView().AdjustMarkHdl();
+
+        // invalidate only when view wants to visualize group entering
+        InvalidateAllWin();
+
+        if (bGlueInvalidate)
+        {
+            GetView().GlueInvalidate();
+        }
+
+        bRet = true;
+    }
+
+    return bRet;
+}
+
+void SdrPageView::LeaveOneGroup()
+{
+    SdrObject* pLastGroup = GetCurrentGroup();
+    if (!pLastGroup)
+        return;
+
+    bool bGlueInvalidate = GetView().ImpIsGlueVisible();
+
+    if(bGlueInvalidate)
+        GetView().GlueInvalidate();
+
+    SdrObject* pParentGroup = pLastGroup->getParentSdrObjectFromSdrObject();
+    SdrObjList* pParentList = GetPage();
+
+    if(pParentGroup)
+        pParentList = pParentGroup->GetSubList();
+
+    // deselect everything
+    GetView().UnmarkAll();
+
+    // allocations, pCurrentGroup and pCurrentList need to be set
+    SetCurrentGroupAndList(pParentGroup, pParentList);
+
+    // select the group we just left
+    if (GetView().GetSdrPageView())
+        GetView().MarkObj(pLastGroup, GetView().GetSdrPageView());
+
+    GetView().AdjustMarkHdl();
+
+    // invalidate only if view wants to visualize group entering
+    InvalidateAllWin();
+
+    if(bGlueInvalidate)
+        GetView().GlueInvalidate();
+}
+
+void SdrPageView::LeaveAllGroup()
+{
+    if (SdrObject* pLastGroup = GetCurrentGroup())
+    {
+        bool bGlueInvalidate = GetView().ImpIsGlueVisible();
+
+        if(bGlueInvalidate)
+            GetView().GlueInvalidate();
+
+        // deselect everything
+        GetView().UnmarkAll();
+
+        // allocations, pCurrentGroup and pCurrentList always need to be set
+        SetCurrentGroupAndList(nullptr, GetPage());
+
+        // find and select uppermost group
+        while (pLastGroup->getParentSdrObjectFromSdrObject())
+            pLastGroup = pLastGroup->getParentSdrObjectFromSdrObject();
+
+        if (GetView().GetSdrPageView())
+            GetView().MarkObj(pLastGroup, GetView().GetSdrPageView());
+
+        GetView().AdjustMarkHdl();
+
+        // invalidate only when view wants to visualize group entering
+        InvalidateAllWin();
+
+        if(bGlueInvalidate)
+            GetView().GlueInvalidate();
+    }
+}
+
+sal_uInt16 SdrPageView::GetEnteredLevel() const
+{
+    sal_uInt16 nCount=0;
+    SdrObject* pGrp=GetCurrentGroup();
+    while (pGrp!=nullptr) {
+        nCount++;
+        pGrp=pGrp->getParentSdrObjectFromSdrObject();
+    }
+    return nCount;
+}
+
+void SdrPageView::CheckCurrentGroup()
+{
+    SdrObject* pGrp(GetCurrentGroup());
+
+    while(nullptr != pGrp &&
+        (!pGrp->IsInserted() || nullptr == pGrp->getParentSdrObjListFromSdrObject() || nullptr == pGrp->getSdrPageFromSdrObject()))
+    {
+        // anything outside of the borders?
+        pGrp = pGrp->getParentSdrObjectFromSdrObject();
+    }
+
+    if(pGrp != GetCurrentGroup())
+    {
+        if(nullptr != pGrp)
+        {
+            EnterGroup(pGrp);
+        }
+        else
+        {
+            LeaveAllGroup();
+        }
+    }
+}
+
+// Set background color for svx at SdrPageViews
+void SdrPageView::SetApplicationBackgroundColor(Color aBackgroundColor)
+{
+    maBackgroundColor = aBackgroundColor;
+}
+
+
+// Set document color for svx at SdrPageViews
+void SdrPageView::SetApplicationDocumentColor(Color aDocumentColor)
+{
+    maDocumentColor = aDocumentColor;
+}
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdpdf.cxx b/svx/source/svdraw/svdpdf.cxx
new file mode 100644
index 000000000..188651be3
--- /dev/null
+++ b/svx/source/svdraw/svdpdf.cxx
@@ -0,0 +1,1151 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svdpdf.hxx>
+
+#include <config_features.h>
+
+#if HAVE_FEATURE_PDFIUM
+#include <fpdfview.h>
+#include <fpdf_edit.h>
+#include <fpdf_text.h>
+
+#include <vcl/graph.hxx>
+#include <vcl/vectorgraphicdata.hxx>
+
+#include <math.h>
+#include <editeng/eeitem.hxx>
+#include <editeng/fhgtitem.hxx>
+#include <editeng/wghtitem.hxx>
+#include <editeng/postitem.hxx>
+#include <editeng/udlnitem.hxx>
+#include <editeng/crossedoutitem.hxx>
+#include <editeng/shdditem.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xlncapit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/xflclit.hxx>
+#include <editeng/fontitem.hxx>
+#include <editeng/wrlmitem.hxx>
+#include <editeng/contouritem.hxx>
+#include <editeng/colritem.hxx>
+#include <vcl/metric.hxx>
+#include <editeng/charscaleitem.hxx>
+#include <svx/sdtditm.hxx>
+#include <svx/sdtagitm.hxx>
+#include <svx/sdtfsitm.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdorect.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdetc.hxx>
+#include <svl/itemset.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <tools/helpers.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <svx/xlinjoit.hxx>
+#include <svx/xlndsit.hxx>
+#include <basegfx/polygon/b2dpolygonclipper.hxx>
+#include <svx/xbtmpit.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflbmtit.hxx>
+#include <svx/xflbstit.hxx>
+#include <svx/xlineit0.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <svx/svditer.hxx>
+#include <svx/svdogrp.hxx>
+#include <vcl/dibtools.hxx>
+#include <sal/log.hxx>
+
+namespace
+{
+double sqrt2(double a, double b) { return sqrt(a * a + b * b); }
+
+struct FPDFBitmapDeleter
+{
+    void operator()(FPDF_BITMAP bitmap) { FPDFBitmap_Destroy(bitmap); }
+};
+}
+
+using namespace com::sun::star;
+
+ImpSdrPdfImport::ImpSdrPdfImport(SdrModel& rModel, SdrLayerID nLay, const tools::Rectangle& rRect,
+                                 Graphic const& rGraphic)
+    : maTmpList()
+    , mpVD(VclPtr<VirtualDevice>::Create())
+    , maScaleRect(rRect)
+    , mnMapScalingOfs(0)
+    , mpModel(&rModel)
+    , mnLayer(nLay)
+    , maOldLineColor()
+    , mnLineWidth(0)
+    , maDash(css::drawing::DashStyle_RECT, 0, 0, 0, 0, 0)
+    , mbMov(false)
+    , mbSize(false)
+    , maOfs(0, 0)
+    , mfScaleX(1.0)
+    , mfScaleY(1.0)
+    , maScaleX(1.0)
+    , maScaleY(1.0)
+    , mbFntDirty(true)
+    , mbLastObjWasPolyWithoutLine(false)
+    , mbNoLine(false)
+    , mbNoFill(false)
+    , maClip()
+    , mpPdfDocument(nullptr)
+    , mnPageCount(0)
+    , mdPageWidthPts(0)
+    , mdPageHeightPts(0)
+    , mpPDFium(vcl::pdf::PDFiumLibrary::get())
+{
+    mpVD->EnableOutput(false);
+    mpVD->SetLineColor();
+    mpVD->SetFillColor();
+    maOldLineColor.SetRed(mpVD->GetLineColor().GetRed() + 1);
+    mpLineAttr = std::make_unique<SfxItemSet>(rModel.GetItemPool(),
+                                              svl::Items<XATTR_LINE_FIRST, XATTR_LINE_LAST>{});
+    mpFillAttr = std::make_unique<SfxItemSet>(rModel.GetItemPool(),
+                                              svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+    mpTextAttr = std::make_unique<SfxItemSet>(rModel.GetItemPool(),
+                                              svl::Items<EE_ITEMS_START, EE_ITEMS_END>{});
+    checkClip();
+
+    // Load the buffer using pdfium.
+    auto const& rVectorGraphicData = rGraphic.getVectorGraphicData();
+    mpPdfDocument = FPDF_LoadMemDocument(
+        rVectorGraphicData->getVectorGraphicDataArray().getConstArray(),
+        rVectorGraphicData->getVectorGraphicDataArrayLength(), /*password=*/nullptr);
+    if (!mpPdfDocument)
+    {
+        //TODO: Handle failure to load.
+        switch (FPDF_GetLastError())
+        {
+            case FPDF_ERR_SUCCESS:
+                break;
+            case FPDF_ERR_UNKNOWN:
+                break;
+            case FPDF_ERR_FILE:
+                break;
+            case FPDF_ERR_FORMAT:
+                break;
+            case FPDF_ERR_PASSWORD:
+                break;
+            case FPDF_ERR_SECURITY:
+                break;
+            case FPDF_ERR_PAGE:
+                break;
+            default:
+                break;
+        }
+
+        return;
+    }
+
+    mnPageCount = FPDF_GetPageCount(mpPdfDocument);
+}
+
+ImpSdrPdfImport::~ImpSdrPdfImport() { FPDF_CloseDocument(mpPdfDocument); }
+
+void ImpSdrPdfImport::DoObjects(SvdProgressInfo* pProgrInfo, sal_uInt32* pActionsToReport,
+                                int nPageIndex)
+{
+    const int nPageCount = FPDF_GetPageCount(mpPdfDocument);
+    if (nPageCount > 0 && nPageIndex >= 0 && nPageIndex < nPageCount)
+    {
+        // Render next page.
+        FPDF_PAGE pPdfPage = FPDF_LoadPage(mpPdfDocument, nPageIndex);
+        if (pPdfPage == nullptr)
+            return;
+
+        const double dPageWidth = FPDF_GetPageWidth(pPdfPage);
+        const double dPageHeight = FPDF_GetPageHeight(pPdfPage);
+        SetupPageScale(dPageWidth, dPageHeight);
+
+        // Load the page text to extract it when we get text elements.
+        FPDF_TEXTPAGE pTextPage = FPDFText_LoadPage(pPdfPage);
+
+        const int nPageObjectCount = FPDFPage_CountObjects(pPdfPage);
+        if (pProgrInfo)
+            pProgrInfo->SetActionCount(nPageObjectCount);
+
+        for (int nPageObjectIndex = 0; nPageObjectIndex < nPageObjectCount; ++nPageObjectIndex)
+        {
+            FPDF_PAGEOBJECT pPageObject = FPDFPage_GetObject(pPdfPage, nPageObjectIndex);
+            ImportPdfObject(pPageObject, pTextPage, nPageObjectIndex);
+            if (pProgrInfo && pActionsToReport)
+            {
+                (*pActionsToReport)++;
+
+                if (*pActionsToReport >= 16)
+                {
+                    if (!pProgrInfo->ReportActions(*pActionsToReport))
+                        break;
+
+                    *pActionsToReport = 0;
+                }
+            }
+        }
+
+        FPDFText_ClosePage(pTextPage);
+        FPDF_ClosePage(pPdfPage);
+    }
+}
+
+void ImpSdrPdfImport::SetupPageScale(const double dPageWidth, const double dPageHeight)
+{
+    mfScaleX = mfScaleY = 1.0;
+
+    // Store the page dimensions in Points.
+    mdPageWidthPts = dPageWidth;
+    mdPageHeightPts = dPageHeight;
+
+    Size aPageSize(convertPointToMm100(dPageWidth), convertPointToMm100(dPageHeight));
+
+    if (aPageSize.Width() && aPageSize.Height() && (!maScaleRect.IsEmpty()))
+    {
+        maOfs = maScaleRect.TopLeft();
+
+        if (aPageSize.Width() != (maScaleRect.GetWidth() - 1))
+        {
+            mfScaleX = static_cast<double>(maScaleRect.GetWidth() - 1)
+                       / static_cast<double>(aPageSize.Width());
+        }
+
+        if (aPageSize.Height() != (maScaleRect.GetHeight() - 1))
+        {
+            mfScaleY = static_cast<double>(maScaleRect.GetHeight() - 1)
+                       / static_cast<double>(aPageSize.Height());
+        }
+    }
+
+    mbMov = maOfs.X() != 0 || maOfs.Y() != 0;
+    mbSize = false;
+    maScaleX = Fraction(1, 1);
+    maScaleY = Fraction(1, 1);
+
+    if (aPageSize.Width() != (maScaleRect.GetWidth() - 1))
+    {
+        maScaleX = Fraction(maScaleRect.GetWidth() - 1, aPageSize.Width());
+        mbSize = true;
+    }
+
+    if (aPageSize.Height() != (maScaleRect.GetHeight() - 1))
+    {
+        maScaleY = Fraction(maScaleRect.GetHeight() - 1, aPageSize.Height());
+        mbSize = true;
+    }
+}
+
+size_t ImpSdrPdfImport::DoImport(SdrObjList& rOL, size_t nInsPos, int nPageNumber,
+                                 SvdProgressInfo* pProgrInfo)
+{
+    sal_uInt32 nActionsToReport(0);
+
+    // execute
+    DoObjects(pProgrInfo, &nActionsToReport, nPageNumber);
+
+    if (pProgrInfo)
+    {
+        pProgrInfo->ReportActions(nActionsToReport);
+        nActionsToReport = 0;
+    }
+
+    // MapMode scaling
+    MapScaling();
+
+    // To calculate the progress meter, we use GetActionSize()*3.
+    // However, maTmpList has a lower entry count limit than GetActionSize(),
+    // so the actions that were assumed were too much have to be re-added.
+    // nActionsToReport = (rMtf.GetActionSize() - maTmpList.size()) * 2;
+
+    // announce all currently unannounced rescales
+    if (pProgrInfo)
+    {
+        pProgrInfo->ReportRescales(nActionsToReport);
+        pProgrInfo->SetInsertCount(maTmpList.size());
+    }
+
+    nActionsToReport = 0;
+
+    // insert all objects cached in aTmpList now into rOL from nInsPos
+    nInsPos = std::min(nInsPos, rOL.GetObjCount());
+
+    for (SdrObject* pObj : maTmpList)
+    {
+        rOL.NbcInsertObject(pObj, nInsPos);
+        nInsPos++;
+
+        if (pProgrInfo)
+        {
+            nActionsToReport++;
+
+            if (nActionsToReport >= 32) // update all 32 actions
+            {
+                pProgrInfo->ReportInserts(nActionsToReport);
+                nActionsToReport = 0;
+            }
+        }
+    }
+
+    // report all remaining inserts for the last time
+    if (pProgrInfo)
+    {
+        pProgrInfo->ReportInserts(nActionsToReport);
+    }
+
+    return maTmpList.size();
+}
+
+void ImpSdrPdfImport::SetAttributes(SdrObject* pObj, bool bForceTextAttr)
+{
+    mbNoLine = false;
+    mbNoFill = false;
+    bool bLine(!bForceTextAttr);
+    bool bFill(!pObj || (pObj->IsClosedObj() && !bForceTextAttr));
+    bool bText(bForceTextAttr || (pObj && pObj->GetOutlinerParaObject()));
+
+    if (bLine)
+    {
+        if (mnLineWidth)
+        {
+            mpLineAttr->Put(XLineWidthItem(mnLineWidth));
+        }
+        else
+        {
+            mpLineAttr->Put(XLineWidthItem(0));
+        }
+
+        maOldLineColor = mpVD->GetLineColor();
+
+        if (mpVD->IsLineColor())
+        {
+            mpLineAttr->Put(XLineStyleItem(drawing::LineStyle_SOLID)); //TODO support dashed lines.
+            mpLineAttr->Put(XLineColorItem(OUString(), mpVD->GetLineColor()));
+        }
+        else
+        {
+            mpLineAttr->Put(XLineStyleItem(drawing::LineStyle_NONE));
+        }
+
+        mpLineAttr->Put(XLineJointItem(css::drawing::LineJoint_NONE));
+
+        // Add LineCap support
+        mpLineAttr->Put(XLineCapItem(gaLineCap));
+
+        if (((maDash.GetDots() && maDash.GetDotLen())
+             || (maDash.GetDashes() && maDash.GetDashLen()))
+            && maDash.GetDistance())
+        {
+            mpLineAttr->Put(XLineDashItem(OUString(), maDash));
+        }
+        else
+        {
+            mpLineAttr->Put(XLineDashItem(OUString(), XDash(css::drawing::DashStyle_RECT)));
+        }
+    }
+    else
+    {
+        mbNoLine = true;
+    }
+
+    if (bFill)
+    {
+        if (mpVD->IsFillColor())
+        {
+            mpFillAttr->Put(XFillStyleItem(drawing::FillStyle_SOLID));
+            mpFillAttr->Put(XFillColorItem(OUString(), mpVD->GetFillColor()));
+        }
+        else
+        {
+            mpFillAttr->Put(XFillStyleItem(drawing::FillStyle_NONE));
+        }
+    }
+    else
+    {
+        mbNoFill = true;
+    }
+
+    if (bText && mbFntDirty)
+    {
+        vcl::Font aFnt(mpVD->GetFont());
+        const sal_uInt32 nHeight(FRound(aFnt.GetFontSize().Height() * mfScaleY));
+
+        mpTextAttr->Put(SvxFontItem(aFnt.GetFamilyType(), aFnt.GetFamilyName(), aFnt.GetStyleName(),
+                                    aFnt.GetPitch(), aFnt.GetCharSet(), EE_CHAR_FONTINFO));
+        mpTextAttr->Put(SvxFontItem(aFnt.GetFamilyType(), aFnt.GetFamilyName(), aFnt.GetStyleName(),
+                                    aFnt.GetPitch(), aFnt.GetCharSet(), EE_CHAR_FONTINFO_CJK));
+        mpTextAttr->Put(SvxFontItem(aFnt.GetFamilyType(), aFnt.GetFamilyName(), aFnt.GetStyleName(),
+                                    aFnt.GetPitch(), aFnt.GetCharSet(), EE_CHAR_FONTINFO_CTL));
+        mpTextAttr->Put(SvxPostureItem(aFnt.GetItalic(), EE_CHAR_ITALIC));
+        mpTextAttr->Put(SvxWeightItem(aFnt.GetWeight(), EE_CHAR_WEIGHT));
+        mpTextAttr->Put(SvxFontHeightItem(nHeight, 100, EE_CHAR_FONTHEIGHT));
+        mpTextAttr->Put(SvxFontHeightItem(nHeight, 100, EE_CHAR_FONTHEIGHT_CJK));
+        mpTextAttr->Put(SvxFontHeightItem(nHeight, 100, EE_CHAR_FONTHEIGHT_CTL));
+        mpTextAttr->Put(SvxCharScaleWidthItem(100, EE_CHAR_FONTWIDTH));
+        mpTextAttr->Put(SvxUnderlineItem(aFnt.GetUnderline(), EE_CHAR_UNDERLINE));
+        mpTextAttr->Put(SvxOverlineItem(aFnt.GetOverline(), EE_CHAR_OVERLINE));
+        mpTextAttr->Put(SvxCrossedOutItem(aFnt.GetStrikeout(), EE_CHAR_STRIKEOUT));
+        mpTextAttr->Put(SvxShadowedItem(aFnt.IsShadow(), EE_CHAR_SHADOW));
+
+        // #i118485# Setting this item leads to problems (written #i118498# for this)
+        // mpTextAttr->Put(SvxAutoKernItem(aFnt.IsKerning(), EE_CHAR_KERNING));
+
+        mpTextAttr->Put(SvxWordLineModeItem(aFnt.IsWordLineMode(), EE_CHAR_WLM));
+        mpTextAttr->Put(SvxContourItem(aFnt.IsOutline(), EE_CHAR_OUTLINE));
+        mpTextAttr->Put(SvxColorItem(mpVD->GetTextColor(), EE_CHAR_COLOR));
+        //... svxfont textitem svditext
+        mbFntDirty = false;
+    }
+
+    if (pObj)
+    {
+        pObj->SetLayer(mnLayer);
+
+        if (bLine)
+        {
+            pObj->SetMergedItemSet(*mpLineAttr);
+        }
+
+        if (bFill)
+        {
+            pObj->SetMergedItemSet(*mpFillAttr);
+        }
+
+        if (bText)
+        {
+            pObj->SetMergedItemSet(*mpTextAttr);
+            pObj->SetMergedItem(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_LEFT));
+        }
+    }
+}
+
+void ImpSdrPdfImport::InsertObj(SdrObject* pObj, bool bScale)
+{
+    if (bScale && !maScaleRect.IsEmpty())
+    {
+        if (mbSize)
+        {
+            pObj->NbcResize(Point(), maScaleX, maScaleY);
+        }
+
+        if (mbMov)
+        {
+            pObj->NbcMove(Size(maOfs.X(), maOfs.Y()));
+        }
+    }
+
+    if (isClip())
+    {
+        const basegfx::B2DPolyPolygon aPoly(pObj->TakeXorPoly());
+        const basegfx::B2DRange aOldRange(aPoly.getB2DRange());
+        const SdrLayerID aOldLayer(pObj->GetLayer());
+        const SfxItemSet aOldItemSet(pObj->GetMergedItemSet());
+        const SdrGrafObj* pSdrGrafObj = dynamic_cast<SdrGrafObj*>(pObj);
+        const SdrTextObj* pSdrTextObj = dynamic_cast<SdrTextObj*>(pObj);
+
+        if (pSdrTextObj && pSdrTextObj->HasText())
+        {
+            // all text objects are created from ImportText and have no line or fill attributes, so
+            // it is okay to concentrate on the text itself
+            while (true)
+            {
+                const basegfx::B2DPolyPolygon aTextContour(pSdrTextObj->TakeContour());
+                const basegfx::B2DRange aTextRange(aTextContour.getB2DRange());
+                const basegfx::B2DRange aClipRange(maClip.getB2DRange());
+
+                // no overlap -> completely outside
+                if (!aClipRange.overlaps(aTextRange))
+                {
+                    SdrObject::Free(pObj);
+                    break;
+                }
+
+                // when the clip is a rectangle fast check for inside is possible
+                if (basegfx::utils::isRectangle(maClip) && aClipRange.isInside(aTextRange))
+                {
+                    // completely inside ClipRect
+                    break;
+                }
+
+                // here text needs to be clipped; to do so, convert to SdrObjects with polygons
+                // and add these recursively. Delete original object, do not add in this run
+                SdrObjectUniquePtr pConverted = pSdrTextObj->ConvertToPolyObj(true, true);
+                SdrObject::Free(pObj);
+
+                if (pConverted)
+                {
+                    // recursively add created conversion; per definition this shall not
+                    // contain further SdrTextObjs. Visit only non-group objects
+                    SdrObjListIter aIter(*pConverted, SdrIterMode::DeepNoGroups);
+
+                    // work with clones; the created conversion may contain group objects
+                    // and when working with the original objects the loop itself could
+                    // break and the cleanup later would be pretty complicated (only delete group
+                    // objects, are these empty, ...?)
+                    while (aIter.IsMore())
+                    {
+                        SdrObject* pCandidate = aIter.Next();
+                        OSL_ENSURE(pCandidate && dynamic_cast<SdrObjGroup*>(pCandidate) == nullptr,
+                                   "SdrObjListIter with SdrIterMode::DeepNoGroups error (!)");
+                        SdrObject* pNewClone(
+                            pCandidate->CloneSdrObject(pCandidate->getSdrModelFromSdrObject()));
+
+                        if (pNewClone)
+                        {
+                            InsertObj(pNewClone, false);
+                        }
+                        else
+                        {
+                            OSL_ENSURE(false, "SdrObject::Clone() failed (!)");
+                        }
+                    }
+                }
+
+                break;
+            }
+        }
+        else
+        {
+            BitmapEx aBitmapEx;
+
+            if (pSdrGrafObj)
+            {
+                aBitmapEx = pSdrGrafObj->GetGraphic().GetBitmapEx();
+            }
+
+            SdrObject::Free(pObj);
+
+            if (!aOldRange.isEmpty())
+            {
+                // clip against ClipRegion
+                const basegfx::B2DPolyPolygon aNewPoly(basegfx::utils::clipPolyPolygonOnPolyPolygon(
+                    aPoly, maClip, true, !aPoly.isClosed()));
+                const basegfx::B2DRange aNewRange(aNewPoly.getB2DRange());
+
+                if (!aNewRange.isEmpty())
+                {
+                    pObj = new SdrPathObj(*mpModel, aNewPoly.isClosed() ? OBJ_POLY : OBJ_PLIN,
+                                          aNewPoly);
+
+                    pObj->SetLayer(aOldLayer);
+                    pObj->SetMergedItemSet(aOldItemSet);
+
+                    if (!!aBitmapEx)
+                    {
+                        // aNewRange is inside of aOldRange and defines which part of aBitmapEx is used
+                        const double fScaleX(aBitmapEx.GetSizePixel().Width()
+                                             / (aOldRange.getWidth() ? aOldRange.getWidth() : 1.0));
+                        const double fScaleY(
+                            aBitmapEx.GetSizePixel().Height()
+                            / (aOldRange.getHeight() ? aOldRange.getHeight() : 1.0));
+                        basegfx::B2DRange aPixel(aNewRange);
+                        basegfx::B2DHomMatrix aTrans;
+
+                        aTrans.translate(-aOldRange.getMinX(), -aOldRange.getMinY());
+                        aTrans.scale(fScaleX, fScaleY);
+                        aPixel.transform(aTrans);
+
+                        const Size aOrigSizePixel(aBitmapEx.GetSizePixel());
+                        const Point aClipTopLeft(
+                            basegfx::fround(floor(std::max(0.0, aPixel.getMinX()))),
+                            basegfx::fround(floor(std::max(0.0, aPixel.getMinY()))));
+                        const Size aClipSize(
+                            basegfx::fround(ceil(std::min(
+                                static_cast<double>(aOrigSizePixel.Width()), aPixel.getWidth()))),
+                            basegfx::fround(
+                                ceil(std::min(static_cast<double>(aOrigSizePixel.Height()),
+                                              aPixel.getHeight()))));
+                        const BitmapEx aClippedBitmap(aBitmapEx, aClipTopLeft, aClipSize);
+
+                        pObj->SetMergedItem(XFillStyleItem(drawing::FillStyle_BITMAP));
+                        pObj->SetMergedItem(XFillBitmapItem(OUString(), Graphic(aClippedBitmap)));
+                        pObj->SetMergedItem(XFillBmpTileItem(false));
+                        pObj->SetMergedItem(XFillBmpStretchItem(true));
+                    }
+                }
+            }
+        }
+    }
+
+    if (pObj)
+    {
+        // #i111954# check object for visibility
+        // used are SdrPathObj, SdrRectObj, SdrCircObj, SdrGrafObj
+        bool bVisible(false);
+
+        if (pObj->HasLineStyle())
+        {
+            bVisible = true;
+        }
+
+        if (!bVisible && pObj->HasFillStyle())
+        {
+            bVisible = true;
+        }
+
+        if (!bVisible)
+        {
+            SdrTextObj* pTextObj = dynamic_cast<SdrTextObj*>(pObj);
+
+            if (pTextObj && pTextObj->HasText())
+            {
+                bVisible = true;
+            }
+        }
+
+        if (!bVisible)
+        {
+            SdrGrafObj* pGrafObj = dynamic_cast<SdrGrafObj*>(pObj);
+
+            if (pGrafObj)
+            {
+                // this may be refined to check if the graphic really is visible. It
+                // is here to ensure that graphic objects without fill, line and text
+                // get created
+                bVisible = true;
+            }
+        }
+
+        if (!bVisible)
+        {
+            SdrObject::Free(pObj);
+        }
+        else
+        {
+            maTmpList.push_back(pObj);
+
+            if (dynamic_cast<SdrPathObj*>(pObj))
+            {
+                const bool bClosed(pObj->IsClosedObj());
+
+                mbLastObjWasPolyWithoutLine = mbNoLine && bClosed;
+            }
+            else
+            {
+                mbLastObjWasPolyWithoutLine = false;
+            }
+        }
+    }
+}
+
+bool ImpSdrPdfImport::CheckLastPolyLineAndFillMerge(const basegfx::B2DPolyPolygon& rPolyPolygon)
+{
+    // #i73407# reformulation to use new B2DPolygon classes
+    if (mbLastObjWasPolyWithoutLine)
+    {
+        SdrObject* pTmpObj = !maTmpList.empty() ? maTmpList[maTmpList.size() - 1] : nullptr;
+        SdrPathObj* pLastPoly = dynamic_cast<SdrPathObj*>(pTmpObj);
+
+        if (pLastPoly)
+        {
+            if (pLastPoly->GetPathPoly() == rPolyPolygon)
+            {
+                SetAttributes(nullptr);
+
+                if (!mbNoLine && mbNoFill)
+                {
+                    pLastPoly->SetMergedItemSet(*mpLineAttr);
+
+                    return true;
+                }
+            }
+        }
+    }
+
+    return false;
+}
+
+void ImpSdrPdfImport::checkClip()
+{
+    if (mpVD->IsClipRegion())
+    {
+        maClip = mpVD->GetClipRegion().GetAsB2DPolyPolygon();
+
+        if (isClip())
+        {
+            const basegfx::B2DHomMatrix aTransform(basegfx::utils::createScaleTranslateB2DHomMatrix(
+                mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+
+            maClip.transform(aTransform);
+        }
+    }
+}
+
+bool ImpSdrPdfImport::isClip() const { return !maClip.getB2DRange().isEmpty(); }
+void ImpSdrPdfImport::ImportPdfObject(FPDF_PAGEOBJECT pPageObject, FPDF_TEXTPAGE pTextPage,
+                                      int nPageObjectIndex)
+{
+    if (pPageObject == nullptr)
+        return;
+
+    const int nPageObjectType = FPDFPageObj_GetType(pPageObject);
+    switch (nPageObjectType)
+    {
+        case FPDF_PAGEOBJ_TEXT:
+            ImportText(pPageObject, pTextPage, nPageObjectIndex);
+            break;
+        case FPDF_PAGEOBJ_PATH:
+            ImportPath(pPageObject, nPageObjectIndex);
+            break;
+        case FPDF_PAGEOBJ_IMAGE:
+            ImportImage(pPageObject, nPageObjectIndex);
+            break;
+        case FPDF_PAGEOBJ_SHADING:
+            SAL_WARN("sd.filter", "Got page object SHADING: " << nPageObjectIndex);
+            break;
+        case FPDF_PAGEOBJ_FORM:
+            ImportForm(pPageObject, pTextPage, nPageObjectIndex);
+            break;
+        default:
+            SAL_WARN("sd.filter", "Unknown PDF page object #" << nPageObjectIndex
+                                                              << " of type: " << nPageObjectType);
+            break;
+    }
+}
+
+void ImpSdrPdfImport::ImportForm(FPDF_PAGEOBJECT pPageObject, FPDF_TEXTPAGE pTextPage,
+                                 int /*nPageObjectIndex*/)
+{
+    // Get the form matrix to perform correct translation/scaling of the form sub-objects.
+    const basegfx::B2DHomMatrix aOldMatrix = maCurrentMatrix;
+
+    FS_MATRIX matrix;
+    FPDFFormObj_GetMatrix(pPageObject, &matrix);
+    maCurrentMatrix
+        = basegfx::B2DHomMatrix::abcdef(matrix.a, matrix.b, matrix.c, matrix.d, matrix.e, matrix.f);
+
+    const int nCount = FPDFFormObj_CountObjects(pPageObject);
+    for (int nIndex = 0; nIndex < nCount; ++nIndex)
+    {
+        FPDF_PAGEOBJECT pFormObject = FPDFFormObj_GetObject(pPageObject, nIndex);
+        ImportPdfObject(pFormObject, pTextPage, -1);
+    }
+
+    // Restore the old one.
+    maCurrentMatrix = aOldMatrix;
+}
+
+void ImpSdrPdfImport::ImportText(FPDF_PAGEOBJECT pPageObject, FPDF_TEXTPAGE pTextPage,
+                                 int /*nPageObjectIndex*/)
+{
+    float left;
+    float bottom;
+    float right;
+    float top;
+    if (!FPDFPageObj_GetBounds(pPageObject, &left, &bottom, &right, &top))
+    {
+        SAL_WARN("sd.filter", "FAILED to get TEXT bounds");
+    }
+
+    if (left == right || top == bottom)
+        return;
+
+    FS_MATRIX matrix;
+    FPDFTextObj_GetMatrix(pPageObject, &matrix);
+    basegfx::B2DHomMatrix aTextMatrix(maCurrentMatrix);
+    basegfx::B2DRange aTextRect(left, top, right, bottom);
+    aTextRect *= aTextMatrix;
+    const tools::Rectangle aRect = PointsToLogic(aTextRect.getMinX(), aTextRect.getMaxX(),
+                                                 aTextRect.getMinY(), aTextRect.getMaxY());
+
+    const int nBytes = FPDFTextObj_GetText(pPageObject, pTextPage, nullptr, 0);
+    std::unique_ptr<sal_Unicode[]> pText(new sal_Unicode[nBytes]);
+
+    const int nActualBytes = FPDFTextObj_GetText(pPageObject, pTextPage, pText.get(), nBytes);
+    if (nActualBytes <= 0)
+    {
+        return;
+    }
+
+    // Let's rely on null-termination for the length of the string. We
+    // just know the number of bytes the string takes, but in OUString
+    // needs the number of characters.
+    OUString sText(pText.get());
+
+    const double dFontSize = FPDFTextObj_GetFontSize(pPageObject);
+    double dFontSizeH = fabs(sqrt2(matrix.a, matrix.c) * dFontSize);
+    double dFontSizeV = fabs(sqrt2(matrix.b, matrix.d) * dFontSize);
+
+    dFontSizeH = convertPointToMm100(dFontSizeH);
+    dFontSizeV = convertPointToMm100(dFontSizeV);
+
+    const Size aFontSize(dFontSizeH, dFontSizeV);
+    vcl::Font aFnt = mpVD->GetFont();
+    if (aFontSize != aFnt.GetFontSize())
+    {
+        aFnt.SetFontSize(aFontSize);
+        mpVD->SetFont(aFnt);
+        mbFntDirty = true;
+    }
+
+    const int nFontName = 80 + 1;
+    std::unique_ptr<char[]> pFontName(new char[nFontName]); // + terminating null
+    char* pCharFontName = reinterpret_cast<char*>(pFontName.get());
+    int nFontNameChars = FPDFTextObj_GetFontName(pPageObject, pCharFontName, nFontName);
+    if (nFontName >= nFontNameChars)
+    {
+        OUString sFontName = OUString::createFromAscii(pFontName.get());
+        if (sFontName != aFnt.GetFamilyName())
+        {
+            aFnt.SetFamilyName(sFontName);
+            mpVD->SetFont(aFnt);
+            mbFntDirty = true;
+        }
+    }
+
+    Color aTextColor(COL_TRANSPARENT);
+    bool bFill = false;
+    bool bUse = true;
+    switch (FPDFTextObj_GetTextRenderMode(pPageObject))
+    {
+        case FPDF_TEXTRENDERMODE_FILL:
+        case FPDF_TEXTRENDERMODE_FILL_CLIP:
+        case FPDF_TEXTRENDERMODE_FILL_STROKE:
+        case FPDF_TEXTRENDERMODE_FILL_STROKE_CLIP:
+            bFill = true;
+            break;
+        case FPDF_TEXTRENDERMODE_STROKE:
+        case FPDF_TEXTRENDERMODE_STROKE_CLIP:
+        case FPDF_TEXTRENDERMODE_UNKNOWN:
+            break;
+        case FPDF_TEXTRENDERMODE_INVISIBLE:
+        case FPDF_TEXTRENDERMODE_CLIP:
+            bUse = false;
+            break;
+    }
+    if (bUse)
+    {
+        unsigned int nR, nG, nB, nA;
+        bool bRet = bFill ? FPDFPageObj_GetFillColor(pPageObject, &nR, &nG, &nB, &nA)
+                          : FPDFPageObj_GetStrokeColor(pPageObject, &nR, &nG, &nB, &nA);
+        if (bRet)
+            aTextColor = Color(nR, nG, nB);
+    }
+
+    if (aTextColor != mpVD->GetTextColor())
+    {
+        mpVD->SetTextColor(aTextColor);
+        mbFntDirty = true;
+    }
+
+    InsertTextObject(aRect.TopLeft(), aRect.GetSize(), sText);
+}
+
+void ImpSdrPdfImport::InsertTextObject(const Point& rPos, const Size& rSize, const OUString& rStr)
+{
+    // calc text box size, add 5% to make it fit safely
+
+    FontMetric aFontMetric(mpVD->GetFontMetric());
+    vcl::Font aFont(mpVD->GetFont());
+    FontAlign eAlignment(aFont.GetAlignment());
+
+    // sal_Int32 nTextWidth = static_cast<sal_Int32>(mpVD->GetTextWidth(rStr) * mfScaleX);
+    sal_Int32 nTextHeight = static_cast<sal_Int32>(mpVD->GetTextHeight() * mfScaleY);
+
+    Point aPosition(FRound(rPos.X() * mfScaleX + maOfs.X()),
+                    FRound(rPos.Y() * mfScaleY + maOfs.Y()));
+    Size aSize(FRound(rSize.Width() * mfScaleX), FRound(rSize.Height() * mfScaleY));
+
+    if (eAlignment == ALIGN_BASELINE)
+        aPosition.AdjustY(-FRound(aFontMetric.GetAscent() * mfScaleY));
+    else if (eAlignment == ALIGN_BOTTOM)
+        aPosition.AdjustY(-nTextHeight);
+
+    tools::Rectangle aTextRect(aPosition, aSize);
+    SdrRectObj* pText = new SdrRectObj(*mpModel, OBJ_TEXT, aTextRect);
+
+    pText->SetMergedItem(makeSdrTextUpperDistItem(0));
+    pText->SetMergedItem(makeSdrTextLowerDistItem(0));
+    pText->SetMergedItem(makeSdrTextRightDistItem(0));
+    pText->SetMergedItem(makeSdrTextLeftDistItem(0));
+
+    if (aFont.GetAverageFontWidth())
+    {
+        pText->ClearMergedItem(SDRATTR_TEXT_AUTOGROWWIDTH);
+        pText->SetMergedItem(makeSdrTextAutoGrowHeightItem(false));
+        // don't let the margins eat the space needed for the text
+        pText->SetMergedItem(SdrTextFitToSizeTypeItem(drawing::TextFitToSizeType_ALLLINES));
+    }
+    else
+    {
+        pText->SetMergedItem(makeSdrTextAutoGrowWidthItem(true));
+    }
+
+    pText->SetLayer(mnLayer);
+    pText->NbcSetText(rStr);
+    SetAttributes(pText, true);
+    pText->SetSnapRect(aTextRect);
+
+    if (!aFont.IsTransparent())
+    {
+        SfxItemSet aAttr(*mpFillAttr->GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+        aAttr.Put(XFillStyleItem(drawing::FillStyle_SOLID));
+        aAttr.Put(XFillColorItem(OUString(), aFont.GetFillColor()));
+        pText->SetMergedItemSet(aAttr);
+    }
+    sal_uInt32 nAngle = aFont.GetOrientation();
+    if (nAngle)
+    {
+        nAngle *= 10;
+        double a = nAngle * F_PI18000;
+        double nSin = sin(a);
+        double nCos = cos(a);
+        pText->NbcRotate(aPosition, nAngle, nSin, nCos);
+    }
+    InsertObj(pText, false);
+}
+
+void ImpSdrPdfImport::MapScaling()
+{
+    const size_t nCount(maTmpList.size());
+    const MapMode& rMap = mpVD->GetMapMode();
+    Point aMapOrg(rMap.GetOrigin());
+    bool bMov2(aMapOrg.X() != 0 || aMapOrg.Y() != 0);
+
+    if (bMov2)
+    {
+        for (size_t i = mnMapScalingOfs; i < nCount; i++)
+        {
+            SdrObject* pObj = maTmpList[i];
+
+            pObj->NbcMove(Size(aMapOrg.X(), aMapOrg.Y()));
+        }
+    }
+
+    mnMapScalingOfs = nCount;
+}
+
+void ImpSdrPdfImport::ImportImage(FPDF_PAGEOBJECT pPageObject, int /*nPageObjectIndex*/)
+{
+    std::unique_ptr<std::remove_pointer<FPDF_BITMAP>::type, FPDFBitmapDeleter> bitmap(
+        FPDFImageObj_GetBitmap(pPageObject));
+    if (!bitmap)
+    {
+        SAL_WARN("sd.filter", "Failed to get IMAGE");
+        return;
+    }
+
+    const int format = FPDFBitmap_GetFormat(bitmap.get());
+    if (format == FPDFBitmap_Unknown)
+    {
+        SAL_WARN("sd.filter", "Failed to get IMAGE format");
+        return;
+    }
+
+    const unsigned char* pBuf
+        = static_cast<const unsigned char*>(FPDFBitmap_GetBuffer(bitmap.get()));
+    const int nWidth = FPDFBitmap_GetWidth(bitmap.get());
+    const int nHeight = FPDFBitmap_GetHeight(bitmap.get());
+    const int nStride = FPDFBitmap_GetStride(bitmap.get());
+    BitmapEx aBitmap(Size(nWidth, nHeight), 24);
+
+    switch (format)
+    {
+        case FPDFBitmap_BGR:
+            ReadRawDIB(aBitmap, pBuf, ScanlineFormat::N24BitTcBgr, nHeight, nStride);
+            break;
+        case FPDFBitmap_BGRx:
+            ReadRawDIB(aBitmap, pBuf, ScanlineFormat::N32BitTcRgba, nHeight, nStride);
+            break;
+        case FPDFBitmap_BGRA:
+            ReadRawDIB(aBitmap, pBuf, ScanlineFormat::N32BitTcBgra, nHeight, nStride);
+            break;
+        default:
+            SAL_WARN("sd.filter", "Got IMAGE width: " << nWidth << ", height: " << nHeight
+                                                      << ", stride: " << nStride
+                                                      << ", format: " << format);
+            break;
+    }
+
+    float left;
+    float bottom;
+    float right;
+    float top;
+    if (!FPDFPageObj_GetBounds(pPageObject, &left, &bottom, &right, &top))
+    {
+        SAL_WARN("sd.filter", "FAILED to get image bounds");
+    }
+
+    tools::Rectangle aRect = PointsToLogic(left, right, top, bottom);
+    aRect.AdjustRight(1);
+    aRect.AdjustBottom(1);
+
+    SdrGrafObj* pGraf = new SdrGrafObj(*mpModel, Graphic(aBitmap), aRect);
+
+    // This action is not creating line and fill, set directly, do not use SetAttributes(..)
+    pGraf->SetMergedItem(XLineStyleItem(drawing::LineStyle_NONE));
+    pGraf->SetMergedItem(XFillStyleItem(drawing::FillStyle_NONE));
+    InsertObj(pGraf);
+}
+
+void ImpSdrPdfImport::ImportPath(FPDF_PAGEOBJECT pPageObject, int /*nPageObjectIndex*/)
+{
+    FS_MATRIX matrix;
+    FPDFPath_GetMatrix(pPageObject, &matrix);
+
+    auto aPathMatrix
+        = basegfx::B2DHomMatrix::abcdef(matrix.a, matrix.b, matrix.c, matrix.d, matrix.e, matrix.f);
+    aPathMatrix *= maCurrentMatrix;
+
+    basegfx::B2DPolyPolygon aPolyPoly;
+    basegfx::B2DPolygon aPoly;
+    std::vector<basegfx::B2DPoint> aBezier;
+
+    const int nSegments = FPDFPath_CountSegments(pPageObject);
+    for (int nSegmentIndex = 0; nSegmentIndex < nSegments; ++nSegmentIndex)
+    {
+        FPDF_PATHSEGMENT pPathSegment = FPDFPath_GetPathSegment(pPageObject, nSegmentIndex);
+        if (pPathSegment != nullptr)
+        {
+            float fx, fy;
+            if (!FPDFPathSegment_GetPoint(pPathSegment, &fx, &fy))
+            {
+                SAL_WARN("sd.filter", "Failed to get PDF path segment point");
+                continue;
+            }
+
+            basegfx::B2DPoint aB2DPoint(fx, fy);
+            aB2DPoint *= aPathMatrix;
+
+            const bool bClose = FPDFPathSegment_GetClose(pPathSegment);
+            if (bClose)
+                aPoly.setClosed(bClose); // TODO: Review
+
+            Point aPoint = PointsToLogic(aB2DPoint.getX(), aB2DPoint.getY());
+            aB2DPoint.setX(aPoint.X());
+            aB2DPoint.setY(aPoint.Y());
+
+            const int nSegmentType = FPDFPathSegment_GetType(pPathSegment);
+            switch (nSegmentType)
+            {
+                case FPDF_SEGMENT_LINETO:
+                    aPoly.append(aB2DPoint);
+                    break;
+
+                case FPDF_SEGMENT_BEZIERTO:
+                    aBezier.emplace_back(aB2DPoint.getX(), aB2DPoint.getY());
+                    if (aBezier.size() == 3)
+                    {
+                        aPoly.appendBezierSegment(aBezier[0], aBezier[1], aBezier[2]);
+                        aBezier.clear();
+                    }
+                    break;
+
+                case FPDF_SEGMENT_MOVETO:
+                    // New Poly.
+                    if (aPoly.count() > 0)
+                    {
+                        aPolyPoly.append(aPoly, 1);
+                        aPoly.clear();
+                    }
+
+                    aPoly.append(aB2DPoint);
+                    break;
+
+                case FPDF_SEGMENT_UNKNOWN:
+                default:
+                    SAL_WARN("sd.filter", "Unknown path segment type in PDF: " << nSegmentType);
+                    break;
+            }
+        }
+    }
+
+    if (aBezier.size() == 3)
+    {
+        aPoly.appendBezierSegment(aBezier[0], aBezier[1], aBezier[2]);
+        aBezier.clear();
+    }
+
+    if (aPoly.count() > 0)
+    {
+        aPolyPoly.append(aPoly, 1);
+        aPoly.clear();
+    }
+
+    const basegfx::B2DHomMatrix aTransform(
+        basegfx::utils::createScaleTranslateB2DHomMatrix(mfScaleX, mfScaleY, maOfs.X(), maOfs.Y()));
+    aPolyPoly.transform(aTransform);
+
+    float fWidth = 1;
+    FPDFPageObj_GetStrokeWidth(pPageObject, &fWidth);
+    const double dWidth = 0.5 * fabs(sqrt2(aPathMatrix.a(), aPathMatrix.c()) * fWidth);
+    mnLineWidth = convertPointToMm100(dWidth);
+
+    int nFillMode = FPDF_FILLMODE_ALTERNATE;
+    FPDF_BOOL bStroke = 1; // Assume we have to draw, unless told otherwise.
+    if (FPDFPath_GetDrawMode(pPageObject, &nFillMode, &bStroke))
+    {
+        if (nFillMode == FPDF_FILLMODE_ALTERNATE)
+            mpVD->SetDrawMode(DrawModeFlags::Default);
+        else if (nFillMode == FPDF_FILLMODE_WINDING)
+            mpVD->SetDrawMode(DrawModeFlags::Default);
+        else
+            mpVD->SetDrawMode(DrawModeFlags::NoFill);
+    }
+
+    unsigned int nR;
+    unsigned int nG;
+    unsigned int nB;
+    unsigned int nA;
+    FPDFPageObj_GetFillColor(pPageObject, &nR, &nG, &nB, &nA);
+    mpVD->SetFillColor(Color(nR, nG, nB));
+
+    if (bStroke)
+    {
+        FPDFPageObj_GetStrokeColor(pPageObject, &nR, &nG, &nB, &nA);
+        mpVD->SetLineColor(Color(nR, nG, nB));
+    }
+    else
+        mpVD->SetLineColor(COL_TRANSPARENT);
+
+    if (!mbLastObjWasPolyWithoutLine || !CheckLastPolyLineAndFillMerge(aPolyPoly))
+    {
+        SdrPathObj* pPath = new SdrPathObj(*mpModel, OBJ_POLY, aPolyPoly);
+        SetAttributes(pPath);
+        InsertObj(pPath, false);
+    }
+}
+
+Point ImpSdrPdfImport::PointsToLogic(double x, double y) const
+{
+    y = correctVertOrigin(y);
+
+    Point aPos(convertPointToMm100(x), convertPointToMm100(y));
+    return aPos;
+}
+
+tools::Rectangle ImpSdrPdfImport::PointsToLogic(double left, double right, double top,
+                                                double bottom) const
+{
+    top = correctVertOrigin(top);
+    bottom = correctVertOrigin(bottom);
+
+    Point aPos(convertPointToMm100(left), convertPointToMm100(top));
+    Size aSize(convertPointToMm100(right - left), convertPointToMm100(bottom - top));
+
+    return tools::Rectangle(aPos, aSize);
+}
+
+#endif // HAVE_FEATURE_PDFIUM
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdpntv.cxx b/svx/source/svdraw/svdpntv.cxx
new file mode 100644
index 000000000..ccc47ca9c
--- /dev/null
+++ b/svx/source/svdraw/svdpntv.cxx
@@ -0,0 +1,1208 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <memory>
+#include <svx/svdpntv.hxx>
+#include <vcl/weld.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <svx/svdmodel.hxx>
+
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svl/hint.hxx>
+
+#include <svx/svdview.hxx>
+#include <svx/svdglue.hxx>
+#include <svx/svdobj.hxx>
+#include <sxlayitm.hxx>
+#include <svl/itemiter.hxx>
+#include <editeng/eeitem.hxx>
+#include <svl/whiter.hxx>
+#include <svl/style.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <vcl/svapp.hxx>
+#include <svx/sdr/contact/objectcontact.hxx>
+#include <svx/sdr/animation/objectanimator.hxx>
+#include <drawinglayer/primitive2d/metafileprimitive2d.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <comphelper/lok.hxx>
+#include <svx/svdviter.hxx>
+
+using namespace ::com::sun::star;
+
+// interface to SdrPaintWindow
+
+SdrPaintWindow* SdrPaintView::FindPaintWindow(const OutputDevice& rOut) const
+{
+    // back to loop - there is more to test than a std::find_if and a lambda can do
+    for(auto& candidate : maPaintWindows)
+    {
+        if(&(candidate->GetOutputDevice()) == &rOut)
+        {
+            return candidate.get();
+        }
+
+        // check for patched to allow finding in that state, too
+        if(nullptr != candidate->getPatched() && &(candidate->getPatched()->GetOutputDevice()) == &rOut)
+        {
+            return candidate->getPatched();
+        }
+    }
+
+    return nullptr;
+}
+
+SdrPaintWindow* SdrPaintView::GetPaintWindow(sal_uInt32 nIndex) const
+{
+    return maPaintWindows[nIndex].get();
+}
+
+void SdrPaintView::DeletePaintWindow(SdrPaintWindow& rOld)
+{
+    auto aFindResult = ::std::find_if(maPaintWindows.begin(), maPaintWindows.end(),
+                            [&](const std::unique_ptr<SdrPaintWindow>& p) { return p.get() == &rOld; });
+
+    if(aFindResult != maPaintWindows.end())
+    {
+        maPaintWindows.erase(aFindResult);
+    }
+}
+
+OutputDevice* SdrPaintView::GetFirstOutputDevice() const
+{
+    if(PaintWindowCount())
+    {
+        return &(GetPaintWindow(0)->GetOutputDevice());
+    }
+
+    return nullptr;
+}
+
+
+SvxViewChangedHint::SvxViewChangedHint()
+{
+}
+
+
+BitmapEx convertMetafileToBitmapEx(
+    const GDIMetaFile& rMtf,
+    const basegfx::B2DRange& rTargetRange,
+    const sal_uInt32 nMaximumQuadraticPixels)
+{
+    BitmapEx aBitmapEx;
+
+    if(rMtf.GetActionSize())
+    {
+        const drawinglayer::primitive2d::Primitive2DReference aMtf(
+            new drawinglayer::primitive2d::MetafilePrimitive2D(
+                basegfx::utils::createScaleTranslateB2DHomMatrix(
+                    rTargetRange.getRange(),
+                    rTargetRange.getMinimum()),
+                rMtf));
+        aBitmapEx = convertPrimitive2DSequenceToBitmapEx(
+            drawinglayer::primitive2d::Primitive2DContainer { aMtf },
+            rTargetRange,
+            nMaximumQuadraticPixels);
+    }
+
+    return aBitmapEx;
+}
+
+
+void SdrPaintView::ImpClearVars()
+{
+    mbPageVisible=true;
+    mbPageShadowVisible=true;
+    mbPageBorderVisible=true;
+    mbBordVisible=true;
+    mbGridVisible=true;
+    mbGridFront  =false;
+    mbHlplVisible=true;
+    mbHlplFront  =true;
+    mbGlueVisible=false;
+    mbGlueVisible2=false;
+    mbGlueVisible3=false;
+    mbGlueVisible4=false;
+    mbSwapAsynchron=false;
+    mbPrintPreview=false;
+    mbPreviewRenderer=false;
+
+    meAnimationMode = SdrAnimationMode::Animate;
+    mbAnimationPause = false;
+
+    mnHitTolPix=2;
+    mnMinMovPix=3;
+    mnHitTolLog=0;
+    mnMinMovLog=0;
+    mpActualOutDev=nullptr;
+    mpDragWin=nullptr;
+    mpDefaultStyleSheet=nullptr;
+    mbSomeObjChgdFlag=false;
+    maComeBackIdle.SetPriority(TaskPriority::REPAINT);
+    maComeBackIdle.SetInvokeHandler(LINK(this,SdrPaintView,ImpComeBackHdl));
+    maComeBackIdle.SetDebugName( "svx::SdrPaintView aComeBackIdle" );
+
+    if (mpModel)
+        SetDefaultStyleSheet(mpModel->GetDefaultStyleSheet(), true);
+
+    maGridColor = COL_BLACK;
+}
+
+SdrPaintView::SdrPaintView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   mrSdrModelFromSdrView(rSdrModel),
+    maDefaultAttr(rSdrModel.GetItemPool()),
+    mbBufferedOutputAllowed(false),
+    mbBufferedOverlayAllowed(false),
+    mbPagePaintingAllowed(true),
+    mbHideOle(false),
+    mbHideChart(false),
+    mbHideDraw(false),
+    mbHideFormControl(false)
+{
+    mpModel=&rSdrModel;
+    ImpClearVars();
+
+    if(pOut)
+    {
+        AddWindowToPaintView(pOut, nullptr);
+    }
+
+    maColorConfig.AddListener(this);
+    onChangeColorConfig();
+}
+
+SdrPaintView::~SdrPaintView()
+{
+    if (mpDefaultStyleSheet)
+        EndListening(*mpDefaultStyleSheet);
+
+    maColorConfig.RemoveListener(this);
+    ClearPageView();
+
+    // delete existing SdrPaintWindows
+    maPaintWindows.clear();
+}
+
+
+void SdrPaintView::Notify(SfxBroadcaster& rBC, const SfxHint& rHint)
+{
+    //If the stylesheet has been destroyed
+    if (&rBC == mpDefaultStyleSheet)
+    {
+        if (rHint.GetId() == SfxHintId::Dying)
+            mpDefaultStyleSheet = nullptr;
+        return;
+    }
+
+    if (rHint.GetId() != SfxHintId::ThisIsAnSdrHint)
+        return;
+    const SdrHint* pSdrHint = static_cast<const SdrHint*>(&rHint);
+    SdrHintKind eKind = pSdrHint->GetKind();
+    if (eKind==SdrHintKind::ObjectChange || eKind==SdrHintKind::ObjectInserted || eKind==SdrHintKind::ObjectRemoved)
+    {
+        bool bObjChg = !mbSomeObjChgdFlag; // if true, evaluate for ComeBack timer
+        if (bObjChg)
+        {
+            mbSomeObjChgdFlag=true;
+            maComeBackIdle.Start();
+        }
+    }
+
+    if (eKind==SdrHintKind::PageOrderChange)
+    {
+        const SdrPage* pPg=pSdrHint->GetPage();
+        if (pPg && !pPg->IsInserted())
+        {
+            if(mpPageView && mpPageView->GetPage() == pPg)
+            {
+                HideSdrPage();
+            }
+        }
+    }
+}
+
+void SdrPaintView::ConfigurationChanged( ::utl::ConfigurationBroadcaster* , ConfigurationHints )
+{
+    onChangeColorConfig();
+    InvalidateAllWin();
+}
+
+IMPL_LINK_NOARG(SdrPaintView, ImpComeBackHdl, Timer *, void)
+{
+    if (mbSomeObjChgdFlag) {
+        mbSomeObjChgdFlag=false;
+        ModelHasChanged();
+    }
+}
+
+void SdrPaintView::FlushComeBackTimer() const
+{
+    if (mbSomeObjChgdFlag) {
+        // casting to nonconst
+        const_cast<SdrPaintView*>(this)->ImpComeBackHdl(&const_cast<SdrPaintView*>(this)->maComeBackIdle);
+        const_cast<SdrPaintView*>(this)->maComeBackIdle.Stop();
+    }
+}
+
+void SdrPaintView::ModelHasChanged()
+{
+    // broadcast to all PageViews
+    if(mpPageView && !mpPageView->GetPage()->IsInserted())
+    {
+        HideSdrPage();
+    }
+
+    // test mpPageView here again, HideSdrPage() may have invalidated it.
+    if(mpPageView)
+    {
+        mpPageView->ModelHasChanged();
+    }
+}
+
+
+bool SdrPaintView::IsAction() const
+{
+    return false;
+}
+
+void SdrPaintView::MovAction(const Point&)
+{
+}
+
+void SdrPaintView::EndAction()
+{
+}
+
+void SdrPaintView::BckAction()
+{
+}
+
+void SdrPaintView::BrkAction()
+{
+}
+
+void SdrPaintView::TakeActionRect(tools::Rectangle&) const
+{
+}
+
+
+// info about TextEdit. Default is false.
+bool SdrPaintView::IsTextEdit() const
+{
+    return false;
+}
+
+sal_uInt16 SdrPaintView::ImpGetMinMovLogic(short nMinMov, const OutputDevice* pOut) const
+{
+    if (nMinMov>=0) return sal_uInt16(nMinMov);
+    if (pOut==nullptr)
+    {
+        pOut = GetFirstOutputDevice();
+    }
+    if (pOut!=nullptr) {
+        return short(-pOut->PixelToLogic(Size(nMinMov,0)).Width());
+    } else {
+        return 0;
+    }
+}
+
+sal_uInt16 SdrPaintView::ImpGetHitTolLogic(short nHitTol, const OutputDevice* pOut) const
+{
+    if (nHitTol>=0) return sal_uInt16(nHitTol);
+    if (pOut==nullptr)
+    {
+        pOut = GetFirstOutputDevice();
+    }
+    if (pOut!=nullptr) {
+        return short(-pOut->PixelToLogic(Size(nHitTol,0)).Width());
+    } else {
+        return 0;
+    }
+}
+
+void SdrPaintView::TheresNewMapMode()
+{
+    if (mpActualOutDev) {
+        mnHitTolLog=static_cast<sal_uInt16>(mpActualOutDev->PixelToLogic(Size(mnHitTolPix,0)).Width());
+        mnMinMovLog=static_cast<sal_uInt16>(mpActualOutDev->PixelToLogic(Size(mnMinMovPix,0)).Width());
+    }
+}
+
+void SdrPaintView::SetActualWin(const OutputDevice* pWin)
+{
+    mpActualOutDev = const_cast<OutputDevice *>(pWin);
+    TheresNewMapMode();
+}
+
+
+void SdrPaintView::ClearPageView()
+{
+    BrkAction();
+
+    if(mpPageView)
+    {
+        InvalidateAllWin();
+        mpPageView.reset();
+    }
+}
+
+SdrPageView* SdrPaintView::ShowSdrPage(SdrPage* pPage)
+{
+    if(pPage && (!mpPageView || mpPageView->GetPage() != pPage))
+    {
+        if(mpPageView)
+        {
+            InvalidateAllWin();
+            mpPageView.reset();
+        }
+
+        mpPageView.reset(new SdrPageView(pPage, *static_cast<SdrView*>(this)));
+        mpPageView->Show();
+    }
+
+    return mpPageView.get();
+}
+
+void SdrPaintView::HideSdrPage()
+{
+    if(mpPageView)
+    {
+        mpPageView->Hide();
+        mpPageView.reset();
+    }
+}
+
+void SdrPaintView::AddWindowToPaintView(OutputDevice* pNewWin, vcl::Window *pWindow)
+{
+    DBG_ASSERT(pNewWin, "SdrPaintView::AddWindowToPaintView: No OutputDevice(!)");
+    SdrPaintWindow* pNewPaintWindow = new SdrPaintWindow(*this, *pNewWin, pWindow);
+    maPaintWindows.emplace_back(pNewPaintWindow);
+
+    if(mpPageView)
+    {
+        mpPageView->AddPaintWindowToPageView(*pNewPaintWindow);
+    }
+}
+
+void SdrPaintView::DeleteWindowFromPaintView(OutputDevice* pOldWin)
+{
+    assert(pOldWin && "SdrPaintView::DeleteWindowFromPaintView: No OutputDevice(!)");
+    SdrPaintWindow* pCandidate = FindPaintWindow(*pOldWin);
+
+    if(pCandidate)
+    {
+        if(mpPageView)
+        {
+            mpPageView->RemovePaintWindowFromPageView(*pCandidate);
+        }
+
+        DeletePaintWindow(*pCandidate);
+    }
+}
+
+void SdrPaintView::SetLayerVisible(const OUString& rName, bool bShow)
+{
+    if(mpPageView)
+    {
+        mpPageView->SetLayerVisible(rName, bShow);
+    }
+
+    InvalidateAllWin();
+}
+
+bool SdrPaintView::IsLayerVisible(const OUString& rName) const
+{
+    if(mpPageView)
+    {
+        return mpPageView->IsLayerVisible(rName);
+    }
+
+    return false;
+}
+
+void SdrPaintView::SetLayerLocked(const OUString& rName, bool bLock)
+{
+    if(mpPageView)
+    {
+        mpPageView->SetLayerLocked(rName,bLock);
+    }
+}
+
+bool SdrPaintView::IsLayerLocked(const OUString& rName) const
+{
+    if(mpPageView)
+    {
+        return mpPageView->IsLayerLocked(rName);
+    }
+
+    return false;
+}
+
+void SdrPaintView::SetLayerPrintable(const OUString& rName, bool bPrn)
+{
+    if(mpPageView)
+    {
+        mpPageView->SetLayerPrintable(rName,bPrn);
+    }
+}
+
+bool SdrPaintView::IsLayerPrintable(const OUString& rName) const
+{
+    if(mpPageView)
+    {
+        return mpPageView->IsLayerPrintable(rName);
+    }
+
+    return false;
+}
+
+void SdrPaintView::PrePaint()
+{
+    if(mpPageView)
+    {
+        mpPageView->PrePaint();
+    }
+}
+
+
+// #define SVX_REPAINT_TIMER_TEST
+
+void SdrPaintView::CompleteRedraw(OutputDevice* pOut, const vcl::Region& rReg, sdr::contact::ViewObjectContactRedirector* pRedirector)
+{
+#ifdef SVX_REPAINT_TIMER_TEST
+#define REMEMBERED_TIMES_COUNT  (10)
+    static bool bDoTimerTest(false);
+    static bool bTimesInited(false);
+    static sal_uInt32 nRepeatCount(10);
+    static double fLastTimes[REMEMBERED_TIMES_COUNT];
+    const sal_uInt64 nStartTime(tools::Time::GetSystemTicks());
+    sal_uInt32 count(1);
+    sal_uInt32 a;
+
+    if(bDoTimerTest)
+    {
+        count = nRepeatCount;
+    }
+
+    for(a = 0; a < count; a++)
+    {
+#endif // SVX_REPAINT_TIMER_TEST
+
+    // #i74769# check if pOut is a win and has a ClipRegion. If Yes, the Region
+    // rReg may be made more granular (fine) with using it. Normally, rReg
+    // does come from Window::Paint() anyways and thus is based on a single
+    // rectangle which was derived from exactly that repaint region
+    vcl::Region aOptimizedRepaintRegion(rReg);
+
+    if(pOut && OUTDEV_WINDOW == pOut->GetOutDevType())
+    {
+        vcl::Window* pWindow = static_cast<vcl::Window*>(pOut);
+
+        if(pWindow->IsInPaint())
+        {
+            if(!pWindow->GetPaintRegion().IsEmpty())
+            {
+                aOptimizedRepaintRegion.Intersect(pWindow->GetPaintRegion());
+            }
+        }
+    }
+
+    SdrPaintWindow* pPaintWindow = BeginCompleteRedraw(pOut);
+    OSL_ENSURE(pPaintWindow, "SdrPaintView::CompleteRedraw: No OutDev (!)");
+
+    DoCompleteRedraw(*pPaintWindow, aOptimizedRepaintRegion, pRedirector);
+    EndCompleteRedraw(*pPaintWindow, true);
+
+#ifdef SVX_REPAINT_TIMER_TEST
+    }
+
+    if(bDoTimerTest)
+    {
+        const sal_uInt64 nStopTime(tools::Time::GetSystemTicks());
+        const sal_uInt64 nNeededTime(nStopTime - nStartTime);
+        const double fTimePerPaint((double)nNeededTime / (double)nRepeatCount);
+
+        if(!bTimesInited)
+        {
+            for(a = 0; a < REMEMBERED_TIMES_COUNT; a++)
+            {
+                fLastTimes[a] = fTimePerPaint;
+            }
+
+            bTimesInited = true;
+        }
+        else
+        {
+            for(a = 1; a < REMEMBERED_TIMES_COUNT; a++)
+            {
+                fLastTimes[a - 1] = fLastTimes[a];
+            }
+
+            fLastTimes[REMEMBERED_TIMES_COUNT - 1] = fTimePerPaint;
+        }
+
+        double fAddedTimes(0.0);
+
+        for(a = 0; a < REMEMBERED_TIMES_COUNT; a++)
+        {
+            fAddedTimes += fLastTimes[a];
+        }
+
+        const double fAverageTimePerPaint(fAddedTimes / (double)REMEMBERED_TIMES_COUNT);
+
+        fprintf(stderr, "-----------(start result)----------\n");
+        fprintf(stderr, "StartTime : %" SAL_PRIuUINT64 ", StopTime: %" SAL_PRIuUINT64 ", NeededTime: %" SAL_PRIuUINT64 ", TimePerPaint: %f\n", nStartTime, nStopTime, nNeededTime, fTimePerPaint);
+        fprintf(stderr, "Remembered times: ");
+
+        for(a = 0; a < REMEMBERED_TIMES_COUNT; a++)
+        {
+            fprintf(stderr, "%d: %f ", a, fLastTimes[a]);
+        }
+
+        fprintf(stderr, "\n");
+        fprintf(stderr, "AverageTimePerPaint: %f\n", fAverageTimePerPaint);
+        fprintf(stderr, "-----------(stop result)----------\n");
+    }
+#endif // SVX_REPAINT_TIMER_TEST
+}
+
+
+// #i72889#
+
+SdrPaintWindow* SdrPaintView::BeginCompleteRedraw(OutputDevice* pOut)
+{
+    OSL_ENSURE(pOut, "SdrPaintView::BeginCompleteRedraw: No OutDev (!)");
+    SdrPaintWindow* pPaintWindow = FindPaintWindow(*pOut);
+
+    if(pPaintWindow)
+    {
+        // draw preprocessing, only for known devices
+        // prepare PreRendering
+        pPaintWindow->PreparePreRenderDevice();
+    }
+    else
+    {
+        // None of the known OutputDevices is the target of this paint, use
+        // a temporary SdrPaintWindow for this Redraw.
+        pPaintWindow = new SdrPaintWindow(*this, *pOut);
+        pPaintWindow->setTemporaryTarget(true);
+    }
+
+    return pPaintWindow;
+}
+
+void SdrPaintView::DoCompleteRedraw(SdrPaintWindow& rPaintWindow, const vcl::Region& rReg, sdr::contact::ViewObjectContactRedirector* pRedirector)
+{
+    // redraw all PageViews with the target. This may expand the RedrawRegion
+    // at the PaintWindow, plus taking care of FormLayer expansion
+    if(mpPageView)
+    {
+        mpPageView->CompleteRedraw(rPaintWindow, rReg, pRedirector);
+    }
+}
+
+void SdrPaintView::EndCompleteRedraw(SdrPaintWindow& rPaintWindow, bool bPaintFormLayer)
+{
+    std::unique_ptr<SdrPaintWindow> pPaintWindow;
+    if (comphelper::LibreOfficeKit::isActive() && rPaintWindow.getTemporaryTarget())
+    {
+        // Tiled rendering, we must paint the TextEdit to the output device.
+        pPaintWindow.reset(&rPaintWindow);
+        pPaintWindow->setTemporaryTarget(false);
+    }
+
+    if(rPaintWindow.getTemporaryTarget())
+    {
+        // get rid of temp target again
+        delete &rPaintWindow;
+    }
+    else
+    {
+        // draw postprocessing, only for known devices
+        // it is necessary to always paint FormLayer
+        if(bPaintFormLayer)
+        {
+            ImpFormLayerDrawing(rPaintWindow);
+        }
+
+        // look for active TextEdit. As long as this cannot be painted to a VDev,
+        // it cannot get part of buffering. In that case, output evtl. prerender
+        // early and paint text edit to window.
+        if(IsTextEdit() && GetSdrPageView())
+        {
+            static_cast< SdrView* >(this)->TextEditDrawing(rPaintWindow);
+        }
+
+        if (comphelper::LibreOfficeKit::isActive())
+        {
+            // Look for active text edits in other views showing the same page,
+            // and show them as well.
+            if (SdrPageView* pPageView = GetSdrPageView())
+            {
+                SdrViewIter aIter(pPageView->GetPage());
+                for (SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView())
+                {
+                    if (pView == this)
+                        continue;
+
+                    if (pView->IsTextEdit() && pView->GetSdrPageView())
+                    {
+                        pView->TextEditDrawing(rPaintWindow);
+                    }
+                }
+            }
+        }
+
+        // draw Overlay, also to PreRender device if exists
+        rPaintWindow.DrawOverlay(rPaintWindow.GetRedrawRegion());
+
+        // output PreRendering
+        rPaintWindow.OutputPreRenderDevice(rPaintWindow.GetRedrawRegion());
+    }
+}
+
+
+SdrPaintWindow* SdrPaintView::BeginDrawLayers(OutputDevice* pOut, const vcl::Region& rReg, bool bDisableIntersect)
+{
+    // #i74769# use BeginCompleteRedraw() as common base
+    SdrPaintWindow* pPaintWindow = BeginCompleteRedraw(pOut);
+    OSL_ENSURE(pPaintWindow, "SdrPaintView::BeginDrawLayers: No SdrPaintWindow (!)");
+
+    if(mpPageView)
+    {
+        SdrPageWindow* pKnownTarget = mpPageView->FindPageWindow(*pPaintWindow);
+
+        if(pKnownTarget)
+        {
+            vcl::Region aOptimizedRepaintRegion = OptimizeDrawLayersRegion( pOut, rReg, bDisableIntersect );
+
+            // prepare redraw
+            pKnownTarget->PrepareRedraw(aOptimizedRepaintRegion);
+
+            // remember prepared SdrPageWindow
+            mpPageView->setPreparedPageWindow(pKnownTarget);
+        }
+    }
+
+    return pPaintWindow;
+}
+
+void SdrPaintView::EndDrawLayers(SdrPaintWindow& rPaintWindow, bool bPaintFormLayer)
+{
+    // #i74769# use EndCompleteRedraw() as common base
+    EndCompleteRedraw(rPaintWindow, bPaintFormLayer);
+
+    if(mpPageView)
+    {
+        // forget prepared SdrPageWindow
+        mpPageView->setPreparedPageWindow(nullptr);
+    }
+}
+
+void SdrPaintView::UpdateDrawLayersRegion(OutputDevice* pOut, const vcl::Region& rReg)
+{
+    SdrPaintWindow* pPaintWindow = FindPaintWindow(*pOut);
+    OSL_ENSURE(pPaintWindow, "SdrPaintView::UpdateDrawLayersRegion: No SdrPaintWindow (!)");
+
+    if(mpPageView)
+    {
+        SdrPageWindow* pKnownTarget = mpPageView->FindPageWindow(*pPaintWindow);
+
+        if(pKnownTarget)
+        {
+            vcl::Region aOptimizedRepaintRegion = OptimizeDrawLayersRegion( pOut, rReg, false/*bDisableIntersect*/ );
+            pKnownTarget->GetPaintWindow().SetRedrawRegion(aOptimizedRepaintRegion);
+            mpPageView->setPreparedPageWindow(pKnownTarget); // already set actually
+        }
+    }
+}
+
+vcl::Region SdrPaintView::OptimizeDrawLayersRegion(OutputDevice* pOut, const vcl::Region& rReg, bool bDisableIntersect)
+{
+    // #i74769# check if pOut is a win and has a ClipRegion. If Yes, the Region
+    // rReg may be made more granular (fine) with using it. Normally, rReg
+    // does come from Window::Paint() anyways and thus is based on a single
+    // rectangle which was derived from exactly that repaint region
+    vcl::Region aOptimizedRepaintRegion(rReg);
+
+    // #i76114# Intersecting the region with the Window's paint region is disabled
+    // for print preview in Calc, because the intersection can be empty (if the paint
+    // region is outside of the table area of the page), and then no clip region
+    // would be set.
+    if(pOut && OUTDEV_WINDOW == pOut->GetOutDevType() && !bDisableIntersect)
+    {
+        vcl::Window* pWindow = static_cast<vcl::Window*>(pOut);
+
+        if(pWindow->IsInPaint())
+        {
+            if(!pWindow->GetPaintRegion().IsEmpty())
+            {
+                aOptimizedRepaintRegion.Intersect(pWindow->GetPaintRegion());
+            }
+        }
+    }
+    return aOptimizedRepaintRegion;
+}
+
+
+void SdrPaintView::ImpFormLayerDrawing( SdrPaintWindow& rPaintWindow )
+{
+    if(mpPageView)
+    {
+        SdrPageWindow* pKnownTarget = mpPageView->FindPageWindow(rPaintWindow);
+
+        if(pKnownTarget)
+        {
+            const SdrModel& rModel = *(GetModel());
+            const SdrLayerAdmin& rLayerAdmin = rModel.GetLayerAdmin();
+            const SdrLayerID nControlLayerId = rLayerAdmin.GetLayerID(rLayerAdmin.GetControlLayerName());
+
+            // BUFFERED use GetTargetOutputDevice() now, it may be targeted to VDevs, too
+            // need to set PreparedPageWindow to make DrawLayer use the correct ObjectContact
+            mpPageView->setPreparedPageWindow(pKnownTarget);
+            mpPageView->DrawLayer(nControlLayerId, &rPaintWindow.GetTargetOutputDevice());
+            mpPageView->setPreparedPageWindow(nullptr);
+        }
+    }
+}
+
+
+bool SdrPaintView::KeyInput(const KeyEvent& /*rKEvt*/, vcl::Window* /*pWin*/)
+{
+    return false;
+}
+
+void SdrPaintView::GlueInvalidate() const
+{
+    const sal_uInt32 nWindowCount(PaintWindowCount());
+
+    for(sal_uInt32 nWinNum(0); nWinNum < nWindowCount; nWinNum++)
+    {
+        SdrPaintWindow* pPaintWindow = GetPaintWindow(nWinNum);
+
+        if(pPaintWindow->OutputToWindow())
+        {
+            OutputDevice& rOutDev = pPaintWindow->GetOutputDevice();
+
+            if(mpPageView)
+            {
+                const SdrObjList* pOL=mpPageView->GetObjList();
+                const size_t nObjCount = pOL->GetObjCount();
+                for (size_t nObjNum=0; nObjNum<nObjCount; ++nObjNum) {
+                    const SdrObject* pObj=pOL->GetObj(nObjNum);
+                    const SdrGluePointList* pGPL=pObj->GetGluePointList();
+                    if (pGPL!=nullptr && pGPL->GetCount()!=0) {
+                        pGPL->Invalidate(static_cast<vcl::Window&>(rOutDev), pObj);
+                    }
+                }
+            }
+        }
+    }
+}
+
+void SdrPaintView::InvalidateAllWin()
+{
+    const sal_uInt32 nWindowCount(PaintWindowCount());
+
+    for(sal_uInt32 a(0); a < nWindowCount; a++)
+    {
+        SdrPaintWindow* pPaintWindow = GetPaintWindow(a);
+
+        if(pPaintWindow->OutputToWindow())
+        {
+            InvalidateOneWin(pPaintWindow->GetOutputDevice());
+        }
+    }
+}
+
+void SdrPaintView::InvalidateAllWin(const tools::Rectangle& rRect)
+{
+    const sal_uInt32 nWindowCount(PaintWindowCount());
+
+    for(sal_uInt32 a(0); a < nWindowCount; a++)
+    {
+        SdrPaintWindow* pPaintWindow = GetPaintWindow(a);
+
+        if(pPaintWindow->OutputToWindow())
+        {
+            OutputDevice& rOutDev = pPaintWindow->GetOutputDevice();
+            tools::Rectangle aRect(rRect);
+
+            Point aOrg(rOutDev.GetMapMode().GetOrigin());
+            aOrg.setX(-aOrg.X() ); aOrg.setY(-aOrg.Y() );
+            tools::Rectangle aOutRect(aOrg, rOutDev.GetOutputSize());
+
+            // In case of tiled rendering we want to get all invalidations, so visual area is not interesting.
+            if (aRect.IsOver(aOutRect) || comphelper::LibreOfficeKit::isActive())
+            {
+                InvalidateOneWin(rOutDev, aRect);
+            }
+        }
+    }
+}
+
+void SdrPaintView::InvalidateOneWin(OutputDevice& rDevice)
+{
+    vcl::Window& rWin(static_cast<vcl::Window&>(rDevice));
+    // do not erase background, that causes flicker (!)
+    rWin.Invalidate(InvalidateFlags::NoErase);
+}
+
+void SdrPaintView::InvalidateOneWin(OutputDevice& rDevice, const tools::Rectangle& rRect)
+{
+    vcl::Window& rWin(static_cast<vcl::Window&>(rDevice));
+    // do not erase background, that causes flicker (!)
+    rWin.Invalidate(rRect, InvalidateFlags::NoErase);
+}
+
+void SdrPaintView::LeaveOneGroup()
+{
+    if(mpPageView)
+    {
+        mpPageView->LeaveOneGroup();
+    }
+}
+
+void SdrPaintView::LeaveAllGroup()
+{
+    if(mpPageView)
+    {
+        mpPageView->LeaveAllGroup();
+    }
+}
+
+bool SdrPaintView::IsGroupEntered() const
+{
+    if(mpPageView)
+    {
+        return (mpPageView->GetEnteredLevel() != 0);
+    }
+
+    return false;
+}
+
+void SdrPaintView::SetNotPersistDefaultAttr(const SfxItemSet& rAttr)
+{
+    // bReplaceAll has no effect here at all.
+    bool bMeasure= dynamic_cast<const SdrView*>(this) != nullptr && static_cast<SdrView*>(this)->IsMeasureTool();
+    const SfxPoolItem *pPoolItem=nullptr;
+    if (rAttr.GetItemState(SDRATTR_LAYERID,true,&pPoolItem)==SfxItemState::SET) {
+        SdrLayerID nLayerId=static_cast<const SdrLayerIdItem*>(pPoolItem)->GetValue();
+        const SdrLayer* pLayer=mpModel->GetLayerAdmin().GetLayerPerID(nLayerId);
+        if (pLayer!=nullptr) {
+            if (bMeasure) maMeasureLayer=pLayer->GetName();
+            else maActualLayer=pLayer->GetName();
+        }
+    }
+    if (rAttr.GetItemState(SDRATTR_LAYERNAME,true,&pPoolItem)==SfxItemState::SET) {
+        if (bMeasure) maMeasureLayer=static_cast<const SdrLayerNameItem*>(pPoolItem)->GetValue();
+        else maActualLayer=static_cast<const SdrLayerNameItem*>(pPoolItem)->GetValue();
+    }
+}
+
+void SdrPaintView::MergeNotPersistDefaultAttr(SfxItemSet& rAttr) const
+{
+    // bOnlyHardAttr has no effect here at all.
+    bool bMeasure= dynamic_cast<const SdrView*>(this) != nullptr && static_cast<const SdrView*>(this)->IsMeasureTool();
+    const OUString& aNam = bMeasure ? maMeasureLayer : maActualLayer;
+    rAttr.Put(SdrLayerNameItem(aNam));
+    SdrLayerID nLayer=mpModel->GetLayerAdmin().GetLayerID(aNam);
+    if (nLayer!=SDRLAYER_NOTFOUND) {
+        rAttr.Put(SdrLayerIdItem(nLayer));
+    }
+}
+
+void SdrPaintView::SetDefaultAttr(const SfxItemSet& rAttr, bool bReplaceAll)
+{
+#ifdef DBG_UTIL
+    {
+        bool bHasEEFeatureItems=false;
+        SfxItemIter aIter(rAttr);
+        for (const SfxPoolItem* pItem = aIter.GetCurItem(); !bHasEEFeatureItems && pItem;
+             pItem = aIter.NextItem())
+        {
+            if (!IsInvalidItem(pItem)) {
+                sal_uInt16 nW=pItem->Which();
+                if (nW>=EE_FEATURE_START && nW<=EE_FEATURE_END) bHasEEFeatureItems=true;
+            }
+        }
+
+        if(bHasEEFeatureItems)
+        {
+            const OUString aMessage("SdrPaintView::SetDefaultAttr(): Setting EE_FEATURE items at the SdrView does not make sense! It only leads to overhead and unreadable documents.");
+            std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(nullptr,
+                                                          VclMessageType::Info, VclButtonsType::Ok,
+                                                          aMessage));
+            xInfoBox->run();
+        }
+    }
+#endif
+    if (bReplaceAll) maDefaultAttr.Set(rAttr);
+    else maDefaultAttr.Put(rAttr,false); // if FALSE, regard InvalidItems as "holes," not as Default
+    SetNotPersistDefaultAttr(rAttr);
+}
+
+void SdrPaintView::SetDefaultStyleSheet(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    if (mpDefaultStyleSheet)
+        EndListening(*mpDefaultStyleSheet);
+    mpDefaultStyleSheet=pStyleSheet;
+    if (mpDefaultStyleSheet)
+        StartListening(*mpDefaultStyleSheet);
+
+    if (pStyleSheet!=nullptr && !bDontRemoveHardAttr) {
+        SfxWhichIter aIter(pStyleSheet->GetItemSet());
+        sal_uInt16 nWhich=aIter.FirstWhich();
+        while (nWhich!=0) {
+            if (pStyleSheet->GetItemSet().GetItemState(nWhich)==SfxItemState::SET) {
+                maDefaultAttr.ClearItem(nWhich);
+            }
+            nWhich=aIter.NextWhich();
+        }
+    }
+}
+
+void SdrPaintView::GetAttributes(SfxItemSet& rTargetSet, bool bOnlyHardAttr) const
+{
+    if(bOnlyHardAttr || !mpDefaultStyleSheet)
+    {
+        rTargetSet.Put(maDefaultAttr, false);
+    }
+    else
+    {
+        // else merge with DefStyleSheet
+        rTargetSet.Put(mpDefaultStyleSheet->GetItemSet(), false);
+        rTargetSet.Put(maDefaultAttr, false);
+    }
+    MergeNotPersistDefaultAttr(rTargetSet);
+}
+
+void SdrPaintView::SetAttributes(const SfxItemSet& rSet, bool bReplaceAll)
+{
+    SetDefaultAttr(rSet,bReplaceAll);
+}
+
+SfxStyleSheet* SdrPaintView::GetStyleSheet() const
+{
+    return mpDefaultStyleSheet;
+}
+
+void SdrPaintView::SetStyleSheet(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    SetDefaultStyleSheet(pStyleSheet,bDontRemoveHardAttr);
+}
+
+void SdrPaintView::MakeVisible(const tools::Rectangle& rRect, vcl::Window& rWin)
+{
+    // TODO: handle when the text cursor goes out of the chart area
+    // However this hack avoids that the cursor gets misplaced wrt the text.
+    if (comphelper::LibreOfficeKit::isActive() && rWin.IsChart())
+    {
+        return;
+    }
+
+    MapMode aMap(rWin.GetMapMode());
+    Size aActualSize(rWin.GetOutputSize());
+
+    if( aActualSize.IsEmpty() )
+        return;
+
+    Size aNewSize(rRect.GetSize());
+    bool bNewScale=false;
+    bool bNeedMoreX=aNewSize.Width()>aActualSize.Width();
+    bool bNeedMoreY=aNewSize.Height()>aActualSize.Height();
+    if (bNeedMoreX || bNeedMoreY)
+    {
+        bNewScale=true;
+        // set new MapMode (Size+Org) and invalidate everything
+        Fraction aXFact(aNewSize.Width(),aActualSize.Width());
+        Fraction aYFact(aNewSize.Height(),aActualSize.Height());
+        if (aYFact>aXFact) aXFact=aYFact;
+        aXFact*=aMap.GetScaleX();
+        aXFact.ReduceInaccurate(10); // to avoid runovers and BigInt mapping
+        aMap.SetScaleX(aXFact);
+        aMap.SetScaleY(aYFact);
+        rWin.SetMapMode(aMap);
+        aActualSize=rWin.GetOutputSize();
+    }
+    Point aOrg(aMap.GetOrigin());
+    long dx=0,dy=0;
+    long l=-aOrg.X();
+    long r=-aOrg.X()+aActualSize.Width()-1;
+    long o=-aOrg.Y();
+    long u=-aOrg.Y()+aActualSize.Height()-1;
+    if (l>rRect.Left()) dx=rRect.Left()-l;
+    else if (r<rRect.Right()) dx=rRect.Right()-r;
+    if (o>rRect.Top()) dy=rRect.Top()-o;
+    else if (u<rRect.Bottom()) dy=rRect.Bottom()-u;
+    aMap.SetOrigin(Point(aOrg.X()-dx,aOrg.Y()-dy));
+    if (!bNewScale) {
+        if (dx!=0 || dy!=0) {
+            rWin.Scroll(-dx,-dy);
+            rWin.SetMapMode(aMap);
+            rWin.PaintImmediately();
+        }
+    } else {
+        rWin.SetMapMode(aMap);
+        InvalidateOneWin(rWin);
+    }
+}
+
+void SdrPaintView::DoConnect(SdrOle2Obj* /*pOleObj*/)
+{
+}
+
+void SdrPaintView::SetAnimationEnabled( bool bEnable )
+{
+    SetAnimationMode( bEnable ? SdrAnimationMode::Animate : SdrAnimationMode::Disable );
+}
+
+void SdrPaintView::SetAnimationPause( bool bSet )
+{
+    if(mbAnimationPause != bSet)
+    {
+        mbAnimationPause = bSet;
+
+        if(mpPageView)
+        {
+            for(sal_uInt32 b(0); b < mpPageView->PageWindowCount(); b++)
+            {
+                SdrPageWindow& rPageWindow = *(mpPageView->GetPageWindow(b));
+                sdr::contact::ObjectContact& rObjectContact = rPageWindow.GetObjectContact();
+                sdr::animation::primitiveAnimator& rAnimator = rObjectContact.getPrimitiveAnimator();
+
+                if(rAnimator.IsPaused() != bSet)
+                {
+                    rAnimator.SetPaused(bSet);
+                }
+            }
+        }
+    }
+}
+
+void SdrPaintView::SetAnimationMode( const SdrAnimationMode eMode )
+{
+    meAnimationMode = eMode;
+}
+
+void SdrPaintView::VisAreaChanged(const OutputDevice* pOut)
+{
+    if(mpPageView)
+    {
+        if (pOut)
+        {
+            SdrPageWindow* pWindow = mpPageView->FindPageWindow(*const_cast<OutputDevice*>(pOut));
+
+            if(pWindow)
+            {
+                VisAreaChanged();
+            }
+        }
+        else
+        {
+            VisAreaChanged();
+        }
+    }
+}
+
+void SdrPaintView::VisAreaChanged()
+{
+    // notify SfxListener
+    Broadcast(SvxViewChangedHint());
+}
+
+
+void SdrPaintView::onChangeColorConfig()
+{
+    maGridColor = maColorConfig.GetColorValue( svtools::DRAWGRID ).nColor;
+}
+
+
+// Set background color for svx at SdrPageViews
+void SdrPaintView::SetApplicationBackgroundColor(Color aBackgroundColor)
+{
+    if(mpPageView)
+    {
+        mpPageView->SetApplicationBackgroundColor(aBackgroundColor);
+    }
+}
+
+// Set document color for svx at SdrPageViews
+void SdrPaintView::SetApplicationDocumentColor(Color aDocumentColor)
+{
+    if(mpPageView)
+    {
+        mpPageView->SetApplicationDocumentColor(aDocumentColor);
+    }
+}
+
+bool SdrPaintView::IsBufferedOutputAllowed() const
+{
+    return (mbBufferedOutputAllowed && maDrawinglayerOpt.IsPaintBuffer());
+}
+
+void SdrPaintView::SetBufferedOutputAllowed(bool bNew)
+{
+    if(bNew != mbBufferedOutputAllowed)
+    {
+        mbBufferedOutputAllowed = bNew;
+    }
+}
+
+bool SdrPaintView::IsBufferedOverlayAllowed() const
+{
+    return (mbBufferedOverlayAllowed && maDrawinglayerOpt.IsOverlayBuffer());
+}
+
+void SdrPaintView::SetBufferedOverlayAllowed(bool bNew)
+{
+    if(bNew != mbBufferedOverlayAllowed)
+    {
+        mbBufferedOverlayAllowed = bNew;
+    }
+}
+
+
+void SdrPaintView::SetPagePaintingAllowed(bool bNew)
+{
+    if(bNew != mbPagePaintingAllowed)
+    {
+        mbPagePaintingAllowed = bNew;
+    }
+}
+
+// #i38135# Sets the timer for Object animations and restarts.
+void SdrPaintView::SetAnimationTimer(sal_uInt32 nTime)
+{
+    if(mpPageView)
+    {
+        // first, reset all timers at all windows to 0L
+        for(sal_uInt32 a(0); a < mpPageView->PageWindowCount(); a++)
+        {
+            SdrPageWindow& rPageWindow = *mpPageView->GetPageWindow(a);
+            sdr::contact::ObjectContact& rObjectContact = rPageWindow.GetObjectContact();
+            sdr::animation::primitiveAnimator& rAnimator = rObjectContact.getPrimitiveAnimator();
+            rAnimator.SetTime(nTime);
+        }
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdpoev.cxx b/svx/source/svdraw/svdpoev.cxx
new file mode 100644
index 000000000..117aa71f7
--- /dev/null
+++ b/svx/source/svdraw/svdpoev.cxx
@@ -0,0 +1,652 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdpoev.hxx>
+#include <math.h>
+#include <svx/svdpagv.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/svdtrans.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <tools/debug.hxx>
+#include <tools/helpers.hxx>
+
+#include <svx/polypolygoneditor.hxx>
+
+using namespace sdr;
+
+
+void SdrPolyEditView::ImpResetPolyPossibilityFlags()
+{
+    eMarkedPointsSmooth=SdrPathSmoothKind::DontCare;
+    eMarkedSegmentsKind=SdrPathSegmentKind::DontCare;
+    bSetMarkedPointsSmoothPossible=false;
+    bSetMarkedSegmentsKindPossible=false;
+}
+
+SdrPolyEditView::SdrPolyEditView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrEditView(rSdrModel, pOut)
+{
+    ImpResetPolyPossibilityFlags();
+}
+
+SdrPolyEditView::~SdrPolyEditView()
+{
+}
+
+void SdrPolyEditView::ImpCheckPolyPossibilities()
+{
+    ImpResetPolyPossibilityFlags();
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    if(nMarkCount && !ImpIsFrameHandles())
+    {
+        bool b1stSmooth(true);
+        bool b1stSegm(true);
+        bool bCurve(false);
+        bool bSmoothFuz(false);
+        bool bSegmFuz(false);
+        basegfx::B2VectorContinuity eSmooth = basegfx::B2VectorContinuity::NONE;
+
+        for(size_t nMarkNum = 0; nMarkNum < nMarkCount; ++nMarkNum)
+        {
+            SdrMark* pM = GetSdrMarkByIndex(nMarkNum);
+            CheckPolyPossibilitiesHelper( pM, b1stSmooth, b1stSegm, bCurve, bSmoothFuz, bSegmFuz, eSmooth );
+        }
+    }
+}
+
+void SdrPolyEditView::CheckPolyPossibilitiesHelper( SdrMark* pM, bool& b1stSmooth, bool& b1stSegm, bool& bCurve, bool& bSmoothFuz, bool& bSegmFuz, basegfx::B2VectorContinuity& eSmooth )
+{
+    SdrObject* pObj = pM->GetMarkedSdrObj();
+    SdrPathObj* pPath = dynamic_cast<SdrPathObj*>( pObj );
+
+    if (!pPath)
+        return;
+
+    SdrUShortCont& rPts = pM->GetMarkedPoints();
+    if (rPts.empty())
+        return;
+
+    const bool bClosed(pPath->IsClosed());
+    bSetMarkedPointsSmoothPossible = true;
+
+    if (bClosed)
+    {
+        bSetMarkedSegmentsKindPossible = true;
+    }
+
+    for (const auto& rPt : rPts)
+    {
+        sal_uInt32 nNum(rPt);
+        sal_uInt32 nPolyNum, nPntNum;
+
+        if(PolyPolygonEditor::GetRelativePolyPoint(pPath->GetPathPoly(), nNum, nPolyNum, nPntNum))
+        {
+            const basegfx::B2DPolygon aLocalPolygon(pPath->GetPathPoly().getB2DPolygon(nPolyNum));
+            bool bCanSegment(bClosed || nPntNum < aLocalPolygon.count() - 1);
+
+            if(!bSetMarkedSegmentsKindPossible && bCanSegment)
+            {
+                bSetMarkedSegmentsKindPossible = true;
+            }
+
+            if(!bSmoothFuz)
+            {
+                if (b1stSmooth)
+                {
+                    b1stSmooth = false;
+                    eSmooth = basegfx::utils::getContinuityInPoint(aLocalPolygon, nPntNum);
+                }
+                else
+                {
+                    bSmoothFuz = (eSmooth != basegfx::utils::getContinuityInPoint(aLocalPolygon, nPntNum));
+                }
+            }
+
+            if(!bSegmFuz && bCanSegment)
+            {
+                bool bCrv(aLocalPolygon.isNextControlPointUsed(nPntNum));
+
+                if(b1stSegm)
+                {
+                    b1stSegm = false;
+                    bCurve = bCrv;
+                }
+                else
+                {
+                    bSegmFuz = (bCrv != bCurve);
+                }
+            }
+        }
+    }
+
+    if(!b1stSmooth && !bSmoothFuz)
+    {
+        if(basegfx::B2VectorContinuity::NONE == eSmooth)
+        {
+            eMarkedPointsSmooth = SdrPathSmoothKind::Angular;
+        }
+
+        if(basegfx::B2VectorContinuity::C1 == eSmooth)
+        {
+            eMarkedPointsSmooth = SdrPathSmoothKind::Asymmetric;
+        }
+
+        if(basegfx::B2VectorContinuity::C2 == eSmooth)
+        {
+            eMarkedPointsSmooth = SdrPathSmoothKind::Symmetric;
+        }
+    }
+
+    if(!b1stSegm && !bSegmFuz)
+    {
+        eMarkedSegmentsKind = bCurve ? SdrPathSegmentKind::Curve : SdrPathSegmentKind::Line;
+    }
+}
+
+void SdrPolyEditView::SetMarkedPointsSmooth(SdrPathSmoothKind eKind)
+{
+    basegfx::B2VectorContinuity eFlags;
+
+    if(SdrPathSmoothKind::Angular == eKind)
+    {
+        eFlags = basegfx::B2VectorContinuity::NONE;
+    }
+    else if(SdrPathSmoothKind::Asymmetric == eKind)
+    {
+        eFlags = basegfx::B2VectorContinuity::C1;
+    }
+    else if(SdrPathSmoothKind::Symmetric == eKind)
+    {
+        eFlags = basegfx::B2VectorContinuity::C2;
+    }
+    else
+    {
+        return;
+    }
+
+    if(HasMarkedPoints())
+    {
+        SortMarkedObjects();
+
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+            BegUndo(SvxResId(STR_EditSetPointsSmooth), GetDescriptionOfMarkedPoints());
+        const size_t nMarkCount(GetMarkedObjectCount());
+
+        for(size_t nMarkNum(nMarkCount); nMarkNum > 0;)
+        {
+            --nMarkNum;
+            SdrMark* pM = GetSdrMarkByIndex(nMarkNum);
+            SdrPathObj* pPath = dynamic_cast< SdrPathObj* >( pM->GetMarkedSdrObj() );
+            if (!pPath)
+                continue;
+
+            SdrUShortCont& rPts = pM->GetMarkedPoints();
+            PolyPolygonEditor aEditor(pPath->GetPathPoly());
+            if (aEditor.SetPointsSmooth(eFlags, rPts))
+            {
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pPath));
+                pPath->SetPathPoly(aEditor.GetPolyPolygon());
+            }
+        }
+
+        if( bUndo )
+            EndUndo();
+    }
+}
+
+void SdrPolyEditView::SetMarkedSegmentsKind(SdrPathSegmentKind eKind)
+{
+    if(HasMarkedPoints())
+    {
+        SortMarkedObjects();
+
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+            BegUndo(SvxResId(STR_EditSetSegmentsKind), GetDescriptionOfMarkedPoints());
+        const size_t nMarkCount(GetMarkedObjectCount());
+
+        for(size_t nMarkNum=nMarkCount; nMarkNum > 0;)
+        {
+            --nMarkNum;
+            SdrMark* pM = GetSdrMarkByIndex(nMarkNum);
+            SdrPathObj* pPath = dynamic_cast< SdrPathObj* >( pM->GetMarkedSdrObj() );
+            if (!pPath)
+                continue;
+            SdrUShortCont& rPts = pM->GetMarkedPoints();
+            PolyPolygonEditor aEditor( pPath->GetPathPoly());
+            if (aEditor.SetSegmentsKind(eKind, rPts))
+            {
+                if( bUndo )
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pPath));
+                pPath->SetPathPoly(aEditor.GetPolyPolygon());
+            }
+        }
+
+        if( bUndo )
+            EndUndo();
+    }
+}
+
+bool SdrPolyEditView::IsSetMarkedPointsSmoothPossible() const
+{
+    ForcePossibilities();
+    return bSetMarkedPointsSmoothPossible;
+}
+
+SdrPathSmoothKind SdrPolyEditView::GetMarkedPointsSmooth() const
+{
+    ForcePossibilities();
+    return eMarkedPointsSmooth;
+}
+
+bool SdrPolyEditView::IsSetMarkedSegmentsKindPossible() const
+{
+    ForcePossibilities();
+    return bSetMarkedSegmentsKindPossible;
+}
+
+SdrPathSegmentKind SdrPolyEditView::GetMarkedSegmentsKind() const
+{
+    ForcePossibilities();
+    return eMarkedSegmentsKind;
+}
+
+bool SdrPolyEditView::IsDeleteMarkedPointsPossible() const
+{
+    return HasMarkedPoints();
+}
+
+void SdrPolyEditView::DeleteMarkedPoints()
+{
+    if (HasMarkedPoints())
+    {
+        BrkAction();
+        SortMarkedObjects();
+        const size_t nMarkCount=GetMarkedObjectCount();
+
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+        {
+            // Description
+            BegUndo(SvxResId(STR_EditDelete),GetDescriptionOfMarkedPoints(),SdrRepeatFunc::Delete);
+        }
+
+        for (size_t nMarkNum=nMarkCount; nMarkNum>0;)
+        {
+            --nMarkNum;
+            SdrMark* pM=GetSdrMarkByIndex(nMarkNum);
+            SdrPathObj* pPath = dynamic_cast< SdrPathObj* >( pM->GetMarkedSdrObj() );
+            if (!pPath)
+                continue;
+
+            SdrUShortCont& rPts = pM->GetMarkedPoints();
+            PolyPolygonEditor aEditor( pPath->GetPathPoly());
+            if (aEditor.DeletePoints(rPts))
+            {
+                if( aEditor.GetPolyPolygon().count() )
+                {
+                    if( bUndo )
+                        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pPath ));
+                    pPath->SetPathPoly( aEditor.GetPolyPolygon() );
+                }
+                else
+                {
+                    if( bUndo )
+                        AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pPath ) );
+                    pM->GetPageView()->GetObjList()->RemoveObject(pPath->GetOrdNum());
+                    if( !bUndo )
+                    {
+                        SdrObject* pObj = pPath;
+                        SdrObject::Free(pObj);
+                    }
+                }
+            }
+        }
+
+        if( bUndo )
+            EndUndo();
+        UnmarkAllPoints();
+        MarkListHasChanged();
+    }
+}
+
+void SdrPolyEditView::RipUpAtMarkedPoints()
+{
+    if(HasMarkedPoints())
+    {
+        SortMarkedObjects();
+        const size_t nMarkCount(GetMarkedObjectCount());
+
+        const bool bUndo = IsUndoEnabled();
+        if( bUndo )
+            BegUndo(SvxResId(STR_EditRipUp), GetDescriptionOfMarkedPoints());
+
+        for(size_t nMarkNum = nMarkCount; nMarkNum > 0;)
+        {
+            --nMarkNum;
+            SdrMark* pM = GetSdrMarkByIndex(nMarkNum);
+            SdrPathObj* pObj = dynamic_cast<SdrPathObj*>( pM->GetMarkedSdrObj() );
+            if (!pObj)
+                continue;
+
+            SdrUShortCont& rPts = pM->GetMarkedPoints();
+
+            if( bUndo )
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+            bool bCorrectionFlag(false);
+            sal_uInt32 nMax(pObj->GetHdlCount());
+
+            for(SdrUShortCont::const_reverse_iterator it = rPts.rbegin(); it != rPts.rend(); ++it)
+            {
+                sal_uInt32 nNewPt0Idx(0);
+                SdrObject* pNewObj = pObj->RipPoint(*it, nNewPt0Idx);
+
+                if(pNewObj)
+                {
+                    pM->GetPageView()->GetObjList()->InsertObject(pNewObj, pObj->GetOrdNum() + 1);
+                    if( bUndo )
+                        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pNewObj));
+                    MarkObj(pNewObj, pM->GetPageView(), false, true);
+                }
+
+                if(nNewPt0Idx)
+                {
+                    // correction necessary?
+                    DBG_ASSERT(!bCorrectionFlag,"Multiple index corrections at SdrPolyEditView::RipUp().");
+                    if(!bCorrectionFlag)
+                    {
+                        bCorrectionFlag = true;
+
+                        SdrUShortCont aReplaceSet;
+                        for(const auto& rPt : rPts)
+                        {
+                            sal_uInt32 nPntNum(rPt);
+                            nPntNum += nNewPt0Idx;
+
+                            if(nPntNum >= nMax)
+                            {
+                                nPntNum -= nMax;
+                            }
+
+                            aReplaceSet.insert( static_cast<sal_uInt16>(nPntNum) );
+                        }
+                        rPts.swap(aReplaceSet);
+
+                        it = rPts.rbegin();
+                    }
+                }
+            }
+        }
+
+        UnmarkAllPoints();
+        if( bUndo )
+            EndUndo();
+        MarkListHasChanged();
+    }
+}
+
+bool SdrPolyEditView::IsRipUpAtMarkedPointsPossible() const
+{
+    bool bRetval(false);
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    for(size_t a = 0; a < nMarkCount; ++a)
+    {
+        const SdrMark* pMark = GetSdrMarkByIndex(a);
+        const SdrPathObj* pMarkedPathObject = dynamic_cast< const SdrPathObj* >(pMark->GetMarkedSdrObj());
+
+        if (!pMarkedPathObject)
+            continue;
+
+        const SdrUShortCont& rSelectedPoints = pMark->GetMarkedPoints();
+        if (rSelectedPoints.empty())
+            continue;
+
+        const basegfx::B2DPolyPolygon& rPathPolyPolygon = pMarkedPathObject->GetPathPoly();
+
+        if(1 == rPathPolyPolygon.count())
+        {
+            // #i76617# Do not yet use basegfx::B2DPolygon since curve definitions
+            // are different and methods need to be changed thoroughly with interaction rework
+            const tools::Polygon aPathPolygon(rPathPolyPolygon.getB2DPolygon(0));
+            const sal_uInt16 nPointCount(aPathPolygon.GetSize());
+
+            if(nPointCount >= 3)
+            {
+                bRetval = pMarkedPathObject->IsClosedObj() // #i76617#
+                    || std::any_of(rSelectedPoints.begin(), rSelectedPoints.end(),
+                        [nPointCount](const sal_uInt16 nMarkedPointNum) {
+                            return nMarkedPointNum > 0 && nMarkedPointNum < nPointCount - 1;
+                        });
+            }
+        }
+    }
+
+    return bRetval;
+}
+
+bool SdrPolyEditView::IsOpenCloseMarkedObjectsPossible() const
+{
+    bool bRetval(false);
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    for(size_t a = 0; a < nMarkCount; ++a)
+    {
+        const SdrMark* pMark = GetSdrMarkByIndex(a);
+        const SdrPathObj* pMarkedPathObject = dynamic_cast< const SdrPathObj* >(pMark->GetMarkedSdrObj());
+
+        if(pMarkedPathObject)
+        {
+            // #i76617# Do not yet use basegfx::B2DPolygon since curve definitions
+            // are different and methods need to be changed thoroughly with interaction rework
+            const tools::PolyPolygon aPathPolyPolygon(pMarkedPathObject->GetPathPoly());
+            const sal_uInt16 nPolygonCount(aPathPolyPolygon.Count());
+
+            for(sal_uInt16 b(0); !bRetval && b < nPolygonCount; b++)
+            {
+                const tools::Polygon& rPathPolygon = aPathPolyPolygon[b];
+                const sal_uInt16 nPointCount(rPathPolygon.GetSize());
+
+                bRetval = (nPointCount >= 3);
+            }
+        }
+    }
+
+    return bRetval;
+}
+
+SdrObjClosedKind SdrPolyEditView::GetMarkedObjectsClosedState() const
+{
+    bool bOpen(false);
+    bool bClosed(false);
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    for(size_t a = 0; !(bOpen && bClosed) && a < nMarkCount; ++a)
+    {
+        const SdrMark* pMark = GetSdrMarkByIndex(a);
+        const SdrPathObj* pMarkedPathObject = dynamic_cast< const SdrPathObj* >(pMark->GetMarkedSdrObj());
+
+        if(pMarkedPathObject)
+        {
+            if(pMarkedPathObject->IsClosedObj())
+            {
+                bClosed = true;
+            }
+            else
+            {
+                bOpen = true;
+            }
+        }
+    }
+
+    if(bOpen && bClosed)
+    {
+        return SdrObjClosedKind::DontCare;
+    }
+    else if(bOpen)
+    {
+        return SdrObjClosedKind::Open;
+    }
+    else
+    {
+        return SdrObjClosedKind::Closed;
+    }
+}
+
+void SdrPolyEditView::ImpTransformMarkedPoints(PPolyTrFunc pTrFunc, const void* p1, const void* p2, const void* p3, const void* p4)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrPathObj* pPath=dynamic_cast<SdrPathObj*>( pObj );
+        if (!pPath)
+            continue;
+
+        const SdrUShortCont& rPts = pM->GetMarkedPoints();
+        if (rPts.empty())
+            continue;
+
+        if( bUndo )
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+
+        basegfx::B2DPolyPolygon aXPP(pPath->GetPathPoly());
+
+        for (const auto& rPt : rPts)
+        {
+            sal_uInt32 nPt = rPt;
+            sal_uInt32 nPolyNum, nPointNum;
+
+            if(PolyPolygonEditor::GetRelativePolyPoint(aXPP, nPt, nPolyNum, nPointNum))
+            {
+                //#i83671# used nLocalPointNum (which was the polygon point count)
+                // instead of the point index (nPointNum). This of course led
+                // to a wrong point access to the B2DPolygon.
+                basegfx::B2DPolygon aNewXP(aXPP.getB2DPolygon(nPolyNum));
+                Point aPos, aC1, aC2;
+                bool bC1(false);
+                bool bC2(false);
+
+                const basegfx::B2DPoint aB2DPos(aNewXP.getB2DPoint(nPointNum));
+                aPos = Point(FRound(aB2DPos.getX()), FRound(aB2DPos.getY()));
+
+                if(aNewXP.isPrevControlPointUsed(nPointNum))
+                {
+                    const basegfx::B2DPoint aB2DC1(aNewXP.getPrevControlPoint(nPointNum));
+                    aC1 = Point(FRound(aB2DC1.getX()), FRound(aB2DC1.getY()));
+                    bC1 = true;
+                }
+
+                if(aNewXP.isNextControlPointUsed(nPointNum))
+                {
+                    const basegfx::B2DPoint aB2DC2(aNewXP.getNextControlPoint(nPointNum));
+                    aC2 = Point(FRound(aB2DC2.getX()), FRound(aB2DC2.getY()));
+                    bC2 = true;
+                }
+
+                (*pTrFunc)(aPos,&aC1,&aC2,p1,p2,p3,p4);
+                aNewXP.setB2DPoint(nPointNum, basegfx::B2DPoint(aPos.X(), aPos.Y()));
+
+                if (bC1)
+                {
+                    aNewXP.setPrevControlPoint(nPointNum, basegfx::B2DPoint(aC1.X(), aC1.Y()));
+                }
+
+                if (bC2)
+                {
+                    aNewXP.setNextControlPoint(nPointNum, basegfx::B2DPoint(aC2.X(), aC2.Y()));
+                }
+
+                aXPP.setB2DPolygon(nPolyNum, aNewXP);
+            }
+        }
+
+        pPath->SetPathPoly(aXPP);
+    }
+}
+
+
+static void ImpMove(Point& rPt, Point* pC1, Point* pC2, const void* p1, const void* /*p2*/, const void* /*p3*/, const void* /*p4*/)
+{
+    rPt.Move(*static_cast<const Size*>(p1));
+    if (pC1!=nullptr) pC1->Move(*static_cast<const Size*>(p1));
+    if (pC2!=nullptr) pC2->Move(*static_cast<const Size*>(p1));
+}
+
+void SdrPolyEditView::MoveMarkedPoints(const Size& rSiz)
+{
+    ForceUndirtyMrkPnt();
+    OUString aStr(SvxResId(STR_EditMove));
+    BegUndo(aStr,GetDescriptionOfMarkedPoints(),SdrRepeatFunc::Move);
+    ImpTransformMarkedPoints(ImpMove,&rSiz);
+    EndUndo();
+    AdjustMarkHdl();
+}
+
+static void ImpResize(Point& rPt, Point* pC1, Point* pC2, const void* p1, const void* p2, const void* p3, const void* /*p4*/)
+{
+    ResizePoint(rPt,*static_cast<const Point*>(p1),*static_cast<const Fraction*>(p2),*static_cast<const Fraction*>(p3));
+    if (pC1!=nullptr) ResizePoint(*pC1,*static_cast<const Point*>(p1),*static_cast<const Fraction*>(p2),*static_cast<const Fraction*>(p3));
+    if (pC2!=nullptr) ResizePoint(*pC2,*static_cast<const Point*>(p1),*static_cast<const Fraction*>(p2),*static_cast<const Fraction*>(p3));
+}
+
+void SdrPolyEditView::ResizeMarkedPoints(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    ForceUndirtyMrkPnt();
+    OUString aStr(SvxResId(STR_EditResize));
+    BegUndo(aStr,GetDescriptionOfMarkedPoints(),SdrRepeatFunc::Resize);
+    ImpTransformMarkedPoints(ImpResize,&rRef,&xFact,&yFact);
+    EndUndo();
+    AdjustMarkHdl();
+}
+
+static void ImpRotate(Point& rPt, Point* pC1, Point* pC2, const void* p1, const void* /*p2*/, const void* p3, const void* p4)
+{
+    RotatePoint(rPt,*static_cast<const Point*>(p1),*static_cast<const double*>(p3),*static_cast<const double*>(p4));
+    if (pC1!=nullptr) RotatePoint(*pC1,*static_cast<const Point*>(p1),*static_cast<const double*>(p3),*static_cast<const double*>(p4));
+    if (pC2!=nullptr) RotatePoint(*pC2,*static_cast<const Point*>(p1),*static_cast<const double*>(p3),*static_cast<const double*>(p4));
+}
+
+void SdrPolyEditView::RotateMarkedPoints(const Point& rRef, long nAngle)
+{
+    ForceUndirtyMrkPnt();
+    OUString aStr(SvxResId(STR_EditResize));
+    BegUndo(aStr,GetDescriptionOfMarkedPoints(),SdrRepeatFunc::Rotate);
+    double nSin = sin(nAngle * F_PI18000);
+    double nCos = cos(nAngle * F_PI18000);
+    ImpTransformMarkedPoints(ImpRotate,&rRef,&nAngle,&nSin,&nCos);
+    EndUndo();
+    AdjustMarkHdl();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdsnpv.cxx b/svx/source/svdraw/svdsnpv.cxx
new file mode 100644
index 000000000..1fd9ac204
--- /dev/null
+++ b/svx/source/svdraw/svdsnpv.cxx
@@ -0,0 +1,633 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdsnpv.hxx>
+#include <math.h>
+
+#include <svx/svdobj.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svditer.hxx>
+#include <svx/sdr/overlay/overlayobjectlist.hxx>
+#include <sdr/overlay/overlaycrosshair.hxx>
+#include <sdr/overlay/overlayhelpline.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <tools/debug.hxx>
+#include <vcl/ptrstyle.hxx>
+
+
+class ImplPageOriginOverlay
+{
+    // The OverlayObjects
+    sdr::overlay::OverlayObjectList               maObjects;
+
+    // The current position in logical coordinates
+    basegfx::B2DPoint                               maPosition;
+
+public:
+    ImplPageOriginOverlay(const SdrPaintView& rView, const basegfx::B2DPoint& rStartPos);
+
+    // The OverlayObjects are cleared using the destructor of OverlayObjectList.
+    // That destructor calls clear() at the list which removes all objects from the
+    // OverlayManager and deletes them.
+
+    void SetPosition(const basegfx::B2DPoint& rNewPosition);
+};
+
+ImplPageOriginOverlay::ImplPageOriginOverlay(const SdrPaintView& rView, const basegfx::B2DPoint& rStartPos)
+:   maPosition(rStartPos)
+{
+    for(sal_uInt32 a(0); a < rView.PaintWindowCount(); a++)
+    {
+        SdrPaintWindow* pCandidate = rView.GetPaintWindow(a);
+        const rtl::Reference< sdr::overlay::OverlayManager >& xTargetOverlay = pCandidate->GetOverlayManager();
+
+        if (xTargetOverlay.is())
+        {
+            std::unique_ptr<sdr::overlay::OverlayCrosshairStriped> aNew(new sdr::overlay::OverlayCrosshairStriped(
+                maPosition));
+            xTargetOverlay->add(*aNew);
+            maObjects.append(std::move(aNew));
+        }
+    }
+}
+
+void ImplPageOriginOverlay::SetPosition(const basegfx::B2DPoint& rNewPosition)
+{
+    if(rNewPosition != maPosition)
+    {
+        // apply to OverlayObjects
+        for(sal_uInt32 a(0); a < maObjects.count(); a++)
+        {
+            sdr::overlay::OverlayCrosshairStriped* pCandidate =
+                static_cast< sdr::overlay::OverlayCrosshairStriped* >(&maObjects.getOverlayObject(a));
+
+            if(pCandidate)
+            {
+                pCandidate->setBasePosition(rNewPosition);
+            }
+        }
+
+        // remember new position
+        maPosition = rNewPosition;
+    }
+}
+
+
+class ImplHelpLineOverlay
+{
+    // The OverlayObjects
+    sdr::overlay::OverlayObjectList               maObjects;
+
+    // The current position in logical coordinates
+    basegfx::B2DPoint                               maPosition;
+
+    // HelpLine specific stuff
+    SdrPageView*                                    mpPageView;
+    sal_uInt16                                      mnHelpLineNumber;
+    SdrHelpLineKind                                 meHelpLineKind;
+
+public:
+    ImplHelpLineOverlay(const SdrPaintView& rView, const basegfx::B2DPoint& rStartPos,
+        SdrPageView* pPageView, sal_uInt16 nHelpLineNumber, SdrHelpLineKind eKind);
+
+    // The OverlayObjects are cleared using the destructor of OverlayObjectList.
+    // That destructor calls clear() at the list which removes all objects from the
+    // OverlayManager and deletes them.
+
+    void SetPosition(const basegfx::B2DPoint& rNewPosition);
+
+    // access to HelpLine specific stuff
+    SdrPageView* GetPageView() const { return mpPageView; }
+    sal_uInt16 GetHelpLineNumber() const { return mnHelpLineNumber; }
+    SdrHelpLineKind GetHelpLineKind() const { return meHelpLineKind; }
+};
+
+ImplHelpLineOverlay::ImplHelpLineOverlay(
+    const SdrPaintView& rView, const basegfx::B2DPoint& rStartPos,
+    SdrPageView* pPageView, sal_uInt16 nHelpLineNumber, SdrHelpLineKind eKind)
+:   maPosition(rStartPos),
+    mpPageView(pPageView),
+    mnHelpLineNumber(nHelpLineNumber),
+    meHelpLineKind(eKind)
+{
+    for(sal_uInt32 a(0); a < rView.PaintWindowCount(); a++)
+    {
+        SdrPaintWindow* pCandidate = rView.GetPaintWindow(a);
+        const rtl::Reference< sdr::overlay::OverlayManager >& xTargetOverlay = pCandidate->GetOverlayManager();
+
+        if (xTargetOverlay.is())
+        {
+            std::unique_ptr<sdr::overlay::OverlayHelplineStriped> aNew(new sdr::overlay::OverlayHelplineStriped(
+                maPosition, meHelpLineKind));
+            xTargetOverlay->add(*aNew);
+            maObjects.append(std::move(aNew));
+        }
+    }
+}
+
+void ImplHelpLineOverlay::SetPosition(const basegfx::B2DPoint& rNewPosition)
+{
+    if(rNewPosition != maPosition)
+    {
+        // apply to OverlayObjects
+        for(sal_uInt32 a(0); a < maObjects.count(); a++)
+        {
+            sdr::overlay::OverlayHelplineStriped* pCandidate =
+                static_cast< sdr::overlay::OverlayHelplineStriped* >(&maObjects.getOverlayObject(a));
+
+            if(pCandidate)
+            {
+                pCandidate->setBasePosition(rNewPosition);
+            }
+        }
+
+        // remember new position
+        maPosition = rNewPosition;
+    }
+}
+
+SdrSnapView::SdrSnapView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrPaintView(rSdrModel, pOut)
+    ,mpPageOriginOverlay(nullptr)
+    ,mpHelpLineOverlay(nullptr)
+    ,nMagnSizPix(4)
+    ,nSnapAngle(1500)
+    ,nEliminatePolyPointLimitAngle(0)
+    ,eCrookMode(SdrCrookMode::Rotate)
+    ,bSnapEnab(true)
+    ,bGridSnap(true)
+    ,bBordSnap(true)
+    ,bHlplSnap(true)
+    ,bOFrmSnap(true)
+    ,bOPntSnap(false)
+    ,bOConSnap(true)
+    ,bMoveSnapOnlyTopLeft(false)
+    ,bOrtho(false)
+    ,bBigOrtho(true)
+    ,bAngleSnapEnab(false)
+    ,bMoveOnlyDragging(false)
+    ,bSlantButShear(false)
+    ,bCrookNoContortion(false)
+    ,bEliminatePolyPoints(false)
+{
+}
+
+SdrSnapView::~SdrSnapView()
+{
+    BrkSetPageOrg();
+    BrkDragHelpLine();
+}
+
+
+bool SdrSnapView::IsAction() const
+{
+    return IsSetPageOrg() || IsDragHelpLine() || SdrPaintView::IsAction();
+}
+
+void SdrSnapView::MovAction(const Point& rPnt)
+{
+    SdrPaintView::MovAction(rPnt);
+    if (IsSetPageOrg()) {
+        MovSetPageOrg(rPnt);
+    }
+    if (IsDragHelpLine()) {
+        MovDragHelpLine(rPnt);
+    }
+}
+
+void SdrSnapView::EndAction()
+{
+    if (IsSetPageOrg()) {
+        EndSetPageOrg();
+    }
+    if (IsDragHelpLine()) {
+        EndDragHelpLine();
+    }
+    SdrPaintView::EndAction();
+}
+
+void SdrSnapView::BckAction()
+{
+    BrkSetPageOrg();
+    BrkDragHelpLine();
+    SdrPaintView::BckAction();
+}
+
+void SdrSnapView::BrkAction()
+{
+    BrkSetPageOrg();
+    BrkDragHelpLine();
+    SdrPaintView::BrkAction();
+}
+
+void SdrSnapView::TakeActionRect(tools::Rectangle& rRect) const
+{
+    if (IsSetPageOrg() || IsDragHelpLine()) {
+        rRect=tools::Rectangle(maDragStat.GetNow(),maDragStat.GetNow());
+    } else {
+        SdrPaintView::TakeActionRect(rRect);
+    }
+}
+
+
+Point SdrSnapView::GetSnapPos(const Point& rPnt, const SdrPageView* pPV) const
+{
+    Point aPt(rPnt);
+    SnapPos(aPt,pPV);
+    return aPt;
+}
+
+#define NOT_SNAPPED 0x7FFFFFFF
+SdrSnap SdrSnapView::SnapPos(Point& rPnt, const SdrPageView* pPV) const
+{
+    if (!bSnapEnab) return SdrSnap::NOTSNAPPED;
+    long x=rPnt.X();
+    long y=rPnt.Y();
+    if (pPV==nullptr) {
+        pPV=GetSdrPageView();
+        if (pPV==nullptr) return SdrSnap::NOTSNAPPED;
+    }
+
+    long dx=NOT_SNAPPED;
+    long dy=NOT_SNAPPED;
+    long dx1,dy1;
+    long mx=aMagnSiz.Width();
+    long my=aMagnSiz.Height();
+    if (mbHlplVisible && bHlplSnap && !IsDragHelpLine())
+    {
+        const SdrHelpLineList& rHLL=pPV->GetHelpLines();
+        sal_uInt16 nCount=rHLL.GetCount();
+        for (sal_uInt16 i=nCount; i>0;) {
+            i--;
+            const SdrHelpLine& rHL=rHLL[i];
+            const Point& rPos=rHL.GetPos();
+            switch (rHL.GetKind()) {
+                case SdrHelpLineKind::Vertical: {
+                    long a=x-rPos.X();
+                    if (std::abs(a)<=mx) { dx1=-a; if (std::abs(dx1)<std::abs(dx)) dx=dx1; }
+                } break;
+                case SdrHelpLineKind::Horizontal: {
+                    long b=y-rPos.Y();
+                    if (std::abs(b)<=my) { dy1=-b; if (std::abs(dy1)<std::abs(dy)) dy=dy1; }
+                } break;
+                case SdrHelpLineKind::Point: {
+                    long a=x-rPos.X();
+                    long b=y-rPos.Y();
+                    if (std::abs(a)<=mx && std::abs(b)<=my) {
+                        dx1=-a; dy1=-b;
+                        if (std::abs(dx1)<std::abs(dx) && std::abs(dy1)<std::abs(dy)) { dx=dx1; dy=dy1; }
+                    }
+                } break;
+            } // switch
+        }
+    }
+    if (mbBordVisible && bBordSnap) {
+        SdrPage* pPage=pPV->GetPage();
+        long xs=pPage->GetWidth();
+        long ys=pPage->GetHeight();
+        long lft=pPage->GetLeftBorder();
+        long rgt=pPage->GetRightBorder();
+        long upp=pPage->GetUpperBorder();
+        long lwr=pPage->GetLowerBorder();
+        long a;
+        a=x- lft    ; if (std::abs(a)<=mx) { dx1=-a; if (std::abs(dx1)<std::abs(dx)) dx=dx1; } // left margin
+        a=x-(xs-rgt); if (std::abs(a)<=mx) { dx1=-a; if (std::abs(dx1)<std::abs(dx)) dx=dx1; } // right margin
+        a=x         ; if (std::abs(a)<=mx) { dx1=-a; if (std::abs(dx1)<std::abs(dx)) dx=dx1; } // left edge of paper
+        a=x- xs     ; if (std::abs(a)<=mx) { dx1=-a; if (std::abs(dx1)<std::abs(dx)) dx=dx1; } // right edge of paper
+        a=y- upp    ; if (std::abs(a)<=my) { dy1=-a; if (std::abs(dy1)<std::abs(dy)) dy=dy1; } // left margin
+        a=y-(ys-lwr); if (std::abs(a)<=my) { dy1=-a; if (std::abs(dy1)<std::abs(dy)) dy=dy1; } // right margin
+        a=y         ; if (std::abs(a)<=my) { dy1=-a; if (std::abs(dy1)<std::abs(dy)) dy=dy1; } // left edge of paper
+        a=y- ys     ; if (std::abs(a)<=my) { dy1=-a; if (std::abs(dy1)<std::abs(dy)) dy=dy1; } // right edge of paper
+    }
+    if (bOFrmSnap || bOPntSnap) {
+        sal_uInt32 nMaxPointSnapCount=200;
+        sal_uInt32 nMaxFrameSnapCount=200;
+
+        // go back to SdrIterMode::DeepNoGroups runthrough for snap to object comparisons
+        SdrObjListIter aIter(pPV->GetPage(),SdrIterMode::DeepNoGroups,true);
+
+        while (aIter.IsMore() && (nMaxPointSnapCount>0 || nMaxFrameSnapCount>0)) {
+            SdrObject* pO=aIter.Next();
+            tools::Rectangle aRect(pO->GetCurrentBoundRect());
+            aRect.AdjustLeft( -mx );
+            aRect.AdjustRight(mx );
+            aRect.AdjustTop( -my );
+            aRect.AdjustBottom(my );
+            if (aRect.IsInside(rPnt)) {
+                if (bOPntSnap && nMaxPointSnapCount>0)
+                {
+                    sal_uInt32 nCount(pO->GetSnapPointCount());
+                    for (sal_uInt32 i(0); i < nCount && nMaxPointSnapCount > 0; i++)
+                    {
+                        Point aP(pO->GetSnapPoint(i));
+                        dx1=x-aP.X();
+                        dy1=y-aP.Y();
+                        if (std::abs(dx1)<=mx && std::abs(dy1)<=my && std::abs(dx1)<std::abs(dx) && std::abs(dy1)<std::abs(dy)) {
+                            dx=-dx1;
+                            dy=-dy1;
+                        }
+                        nMaxPointSnapCount--;
+                    }
+                }
+                if (bOFrmSnap && nMaxFrameSnapCount>0) {
+                    tools::Rectangle aLog(pO->GetSnapRect());
+                    tools::Rectangle aR1(aLog);
+                    aR1.AdjustLeft( -mx );
+                    aR1.AdjustRight(mx );
+                    aR1.AdjustTop( -my );
+                    aR1.AdjustBottom(my );
+                    if (aR1.IsInside(rPnt)) {
+                        if (std::abs(x-aLog.Left  ())<=mx) { dx1=-(x-aLog.Left  ()); if (std::abs(dx1)<std::abs(dx)) dx=dx1; }
+                        if (std::abs(x-aLog.Right ())<=mx) { dx1=-(x-aLog.Right ()); if (std::abs(dx1)<std::abs(dx)) dx=dx1; }
+                        if (std::abs(y-aLog.Top   ())<=my) { dy1=-(y-aLog.Top   ()); if (std::abs(dy1)<std::abs(dy)) dy=dy1; }
+                        if (std::abs(y-aLog.Bottom())<=my) { dy1=-(y-aLog.Bottom()); if (std::abs(dy1)<std::abs(dy)) dy=dy1; }
+                    }
+                    nMaxFrameSnapCount--;
+                }
+            }
+        }
+    }
+    if(bGridSnap)
+    {
+        double fSnapWidth(aSnapWdtX);
+        if(dx == NOT_SNAPPED && fSnapWidth != 0.0)
+        {
+            double fx = static_cast<double>(x);
+
+            // round instead of trunc
+            if(fx - static_cast<double>(pPV->GetPageOrigin().X()) >= 0.0)
+                fx += fSnapWidth / 2.0;
+            else
+                fx -= fSnapWidth / 2.0;
+
+            x = static_cast<long>((fx - static_cast<double>(pPV->GetPageOrigin().X())) / fSnapWidth);
+            x = static_cast<long>(static_cast<double>(x) * fSnapWidth + static_cast<double>(pPV->GetPageOrigin().X()));
+            dx = 0;
+        }
+        fSnapWidth = double(aSnapWdtY);
+        if(dy == NOT_SNAPPED && fSnapWidth)
+        {
+            double fy = static_cast<double>(y);
+
+            // round instead of trunc
+            if(fy - static_cast<double>(pPV->GetPageOrigin().Y()) >= 0.0)
+                fy += fSnapWidth / 2.0;
+            else
+                fy -= fSnapWidth / 2.0;
+
+            y = static_cast<long>((fy - static_cast<double>(pPV->GetPageOrigin().Y())) / fSnapWidth);
+            y = static_cast<long>(static_cast<double>(y) * fSnapWidth + static_cast<double>(pPV->GetPageOrigin().Y()));
+            dy = 0;
+        }
+    }
+    SdrSnap bRet=SdrSnap::NOTSNAPPED;
+    if (dx==NOT_SNAPPED) dx=0; else bRet|=SdrSnap::XSNAPPED;
+    if (dy==NOT_SNAPPED) dy=0; else bRet|=SdrSnap::YSNAPPED;
+    rPnt.setX(x+dx );
+    rPnt.setY(y+dy );
+    return bRet;
+}
+
+void SdrSnapView::CheckSnap(const Point& rPt, long& nBestXSnap, long& nBestYSnap, bool& bXSnapped, bool& bYSnapped) const
+{
+    Point aPt(rPt);
+    SdrSnap nRet=SnapPos(aPt,nullptr);
+    aPt-=rPt;
+    if (nRet & SdrSnap::XSNAPPED) {
+        if (bXSnapped) {
+            if (std::abs(aPt.X())<std::abs(nBestXSnap)) {
+                nBestXSnap=aPt.X();
+            }
+        } else {
+            nBestXSnap=aPt.X();
+            bXSnapped=true;
+        }
+    }
+    if (nRet & SdrSnap::YSNAPPED) {
+        if (bYSnapped) {
+            if (std::abs(aPt.Y())<std::abs(nBestYSnap)) {
+                nBestYSnap=aPt.Y();
+            }
+        } else {
+            nBestYSnap=aPt.Y();
+            bYSnapped=true;
+        }
+    }
+}
+
+
+void SdrSnapView::BegSetPageOrg(const Point& rPnt)
+{
+    BrkAction();
+
+    DBG_ASSERT(nullptr == mpPageOriginOverlay, "SdrSnapView::BegSetPageOrg: There exists an ImplPageOriginOverlay (!)");
+    basegfx::B2DPoint aStartPos(rPnt.X(), rPnt.Y());
+    mpPageOriginOverlay = new ImplPageOriginOverlay(*this, aStartPos);
+    maDragStat.Reset(GetSnapPos(rPnt,nullptr));
+}
+
+void SdrSnapView::MovSetPageOrg(const Point& rPnt)
+{
+    if(IsSetPageOrg())
+    {
+        maDragStat.NextMove(GetSnapPos(rPnt,nullptr));
+        DBG_ASSERT(mpPageOriginOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        basegfx::B2DPoint aNewPos(maDragStat.GetNow().X(), maDragStat.GetNow().Y());
+        mpPageOriginOverlay->SetPosition(aNewPos);
+    }
+}
+
+void SdrSnapView::EndSetPageOrg()
+{
+    if(IsSetPageOrg())
+    {
+        SdrPageView* pPV = GetSdrPageView();
+
+        if(pPV)
+        {
+            Point aPnt(maDragStat.GetNow());
+            pPV->SetPageOrigin(aPnt);
+        }
+
+        // cleanup
+        BrkSetPageOrg();
+    }
+}
+
+void SdrSnapView::BrkSetPageOrg()
+{
+    if(IsSetPageOrg())
+    {
+        DBG_ASSERT(mpPageOriginOverlay, "SdrSnapView::MovSetPageOrg: no ImplPageOriginOverlay (!)");
+        delete mpPageOriginOverlay;
+        mpPageOriginOverlay = nullptr;
+    }
+}
+
+
+bool SdrSnapView::PickHelpLine(const Point& rPnt, short nTol, const OutputDevice& rOut, sal_uInt16& rnHelpLineNum, SdrPageView*& rpPV) const
+{
+    rpPV=nullptr;
+    nTol=ImpGetHitTolLogic(nTol,&rOut);
+    SdrPageView* pPV = GetSdrPageView();
+
+    if(pPV)
+    {
+        Point aPnt(rPnt);
+        sal_uInt16 nIndex=pPV->GetHelpLines().HitTest(aPnt,sal_uInt16(nTol),rOut);
+        if (nIndex!=SDRHELPLINE_NOTFOUND) {
+            rpPV=pPV;
+            rnHelpLineNum=nIndex;
+            return true;
+        }
+    }
+    return false;
+}
+
+// start HelpLine drag for new HelpLine
+bool SdrSnapView::BegDragHelpLine(sal_uInt16 nHelpLineNum, SdrPageView* pPV)
+{
+    bool bRet(false);
+
+    BrkAction();
+
+    if(pPV && nHelpLineNum < pPV->GetHelpLines().GetCount())
+    {
+        const SdrHelpLineList& rHelpLines = pPV->GetHelpLines();
+        const SdrHelpLine& rHelpLine = rHelpLines[nHelpLineNum];
+        Point aHelpLinePos = rHelpLine.GetPos();
+        basegfx::B2DPoint aStartPos(aHelpLinePos.X(), aHelpLinePos.Y());
+
+        DBG_ASSERT(nullptr == mpHelpLineOverlay, "SdrSnapView::BegDragHelpLine: There exists an ImplHelpLineOverlay (!)");
+        mpHelpLineOverlay = new ImplHelpLineOverlay(*this, aStartPos, pPV, nHelpLineNum, rHelpLine.GetKind());
+
+        maDragStat.Reset(GetSnapPos(aHelpLinePos, pPV));
+        maDragStat.SetMinMove(ImpGetMinMovLogic(-3, nullptr));
+
+        bRet = true;
+    }
+
+    return bRet;
+}
+
+// start HelpLine drag with existing HelpLine
+void SdrSnapView::BegDragHelpLine(const Point& rPnt, SdrHelpLineKind eNewKind)
+{
+    BrkAction();
+
+    if(GetSdrPageView())
+    {
+        DBG_ASSERT(nullptr == mpHelpLineOverlay, "SdrSnapView::BegDragHelpLine: There exists an ImplHelpLineOverlay (!)");
+        basegfx::B2DPoint aStartPos(rPnt.X(), rPnt.Y());
+        mpHelpLineOverlay = new ImplHelpLineOverlay(*this, aStartPos, nullptr, 0, eNewKind);
+        maDragStat.Reset(GetSnapPos(rPnt, nullptr));
+    }
+}
+
+PointerStyle SdrSnapView::GetDraggedHelpLinePointer() const
+{
+    if(IsDragHelpLine())
+    {
+        switch(mpHelpLineOverlay->GetHelpLineKind())
+        {
+            case SdrHelpLineKind::Vertical  : return PointerStyle::ESize;
+            case SdrHelpLineKind::Horizontal: return PointerStyle::SSize;
+            default                    : return PointerStyle::Move;
+        }
+    }
+
+    return PointerStyle::Move;
+}
+
+void SdrSnapView::MovDragHelpLine(const Point& rPnt)
+{
+    if(IsDragHelpLine() && maDragStat.CheckMinMoved(rPnt))
+    {
+        Point aPnt(GetSnapPos(rPnt, nullptr));
+
+        if(aPnt != maDragStat.GetNow())
+        {
+            maDragStat.NextMove(aPnt);
+            DBG_ASSERT(mpHelpLineOverlay, "SdrSnapView::MovDragHelpLine: no ImplHelpLineOverlay (!)");
+            basegfx::B2DPoint aNewPos(maDragStat.GetNow().X(), maDragStat.GetNow().Y());
+            mpHelpLineOverlay->SetPosition(aNewPos);
+        }
+    }
+}
+
+bool SdrSnapView::EndDragHelpLine()
+{
+    bool bRet(false);
+
+    if(IsDragHelpLine())
+    {
+        if(maDragStat.IsMinMoved())
+        {
+            SdrPageView* pPageView = mpHelpLineOverlay->GetPageView();
+
+            if(pPageView)
+            {
+                // moved existing one
+                Point aPnt(maDragStat.GetNow());
+                const SdrHelpLineList& rHelpLines = pPageView->GetHelpLines();
+                SdrHelpLine aChangedHelpLine = rHelpLines[mpHelpLineOverlay->GetHelpLineNumber()];
+                aChangedHelpLine.SetPos(aPnt);
+                pPageView->SetHelpLine(mpHelpLineOverlay->GetHelpLineNumber(), aChangedHelpLine);
+
+                bRet = true;
+            }
+            else
+            {
+                // create new one
+                pPageView = GetSdrPageView();
+
+                if(pPageView)
+                {
+                    Point aPnt(maDragStat.GetNow());
+                    SdrHelpLine aNewHelpLine(mpHelpLineOverlay->GetHelpLineKind(), aPnt);
+                    pPageView->InsertHelpLine(aNewHelpLine);
+
+                    bRet = true;
+                }
+            }
+        }
+
+        // cleanup
+        BrkDragHelpLine();
+    }
+
+    return bRet;
+}
+
+void SdrSnapView::BrkDragHelpLine()
+{
+    if(IsDragHelpLine())
+    {
+        DBG_ASSERT(mpHelpLineOverlay, "SdrSnapView::EndDragHelpLine: no ImplHelpLineOverlay (!)");
+        delete mpHelpLineOverlay;
+        mpHelpLineOverlay = nullptr;
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdtext.cxx b/svx/source/svdraw/svdtext.cxx
new file mode 100644
index 000000000..1d5b3be5b
--- /dev/null
+++ b/svx/source/svdraw/svdtext.cxx
@@ -0,0 +1,146 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdotext.hxx>
+#include <svx/svdetc.hxx>
+#include <editeng/outlobj.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdmodel.hxx>
+#include <svl/itemset.hxx>
+#include <libxml/xmlwriter.h>
+#include <memory>
+
+SdrText::SdrText( SdrTextObj& rObject )
+: mrObject( rObject )
+, mbPortionInfoChecked( false )
+{
+    OSL_ENSURE(&mrObject, "SdrText created without SdrTextObj (!)");
+}
+
+SdrText::~SdrText()
+{
+    clearWeak();
+}
+
+void SdrText::CheckPortionInfo( SdrOutliner& rOutliner )
+{
+    if(!mbPortionInfoChecked)
+    {
+        // #i102062# no action when the Outliner is the HitTestOutliner,
+        // this will remove WrongList info at the OPO
+        if(&rOutliner == &mrObject.getSdrModelFromSdrObject().GetHitTestOutliner())
+            return;
+
+        // TODO: optimization: we could create a BigTextObject
+        mbPortionInfoChecked=true;
+
+        if(mpOutlinerParaObject!=nullptr && rOutliner.ShouldCreateBigTextObject())
+        {
+            // #i102062# MemoryLeak closed
+            mpOutlinerParaObject = rOutliner.CreateParaObject();
+        }
+    }
+}
+
+void SdrText::ReformatText()
+{
+    mbPortionInfoChecked=false;
+    mpOutlinerParaObject->ClearPortionInfo();
+}
+
+const SfxItemSet& SdrText::GetItemSet() const
+{
+    return const_cast< SdrText* >(this)->GetObjectItemSet();
+}
+
+void SdrText::SetOutlinerParaObject( std::unique_ptr<OutlinerParaObject> pTextObject )
+{
+    assert ( !mpOutlinerParaObject || (mpOutlinerParaObject.get() != pTextObject.get()) );
+
+    // Update HitTestOutliner
+    const SdrTextObj* pTestObj(mrObject.getSdrModelFromSdrObject().GetHitTestOutliner().GetTextObj());
+
+    if(pTestObj && pTestObj->GetOutlinerParaObject() == mpOutlinerParaObject.get())
+    {
+        mrObject.getSdrModelFromSdrObject().GetHitTestOutliner().SetTextObj(nullptr);
+    }
+
+    mpOutlinerParaObject = std::move(pTextObject);
+    mbPortionInfoChecked = false;
+}
+
+OutlinerParaObject* SdrText::GetOutlinerParaObject() const
+{
+    return mpOutlinerParaObject.get();
+}
+
+/** returns the current OutlinerParaObject and removes it from this instance */
+std::unique_ptr<OutlinerParaObject> SdrText::RemoveOutlinerParaObject()
+{
+    // Update HitTestOutliner
+    const SdrTextObj* pTestObj(mrObject.getSdrModelFromSdrObject().GetHitTestOutliner().GetTextObj());
+
+    if(pTestObj && pTestObj->GetOutlinerParaObject() == mpOutlinerParaObject.get())
+    {
+        mrObject.getSdrModelFromSdrObject().GetHitTestOutliner().SetTextObj(nullptr);
+    }
+
+    std::unique_ptr<OutlinerParaObject> pOPO = std::move(mpOutlinerParaObject);
+    mbPortionInfoChecked = false;
+
+    return pOPO;
+}
+
+void SdrText::ForceOutlinerParaObject( OutlinerMode nOutlMode )
+{
+    if(!mpOutlinerParaObject)
+    {
+        std::unique_ptr<Outliner> pOutliner(
+            SdrMakeOutliner(
+                nOutlMode,
+                mrObject.getSdrModelFromSdrObject()));
+
+        if(pOutliner)
+        {
+            Outliner& aDrawOutliner(mrObject.getSdrModelFromSdrObject().GetDrawOutliner());
+            pOutliner->SetCalcFieldValueHdl( aDrawOutliner.GetCalcFieldValueHdl() );
+            pOutliner->SetStyleSheet( 0, GetStyleSheet());
+            SetOutlinerParaObject( pOutliner->CreateParaObject() );
+        }
+    }
+}
+
+const SfxItemSet& SdrText::GetObjectItemSet()
+{
+    return mrObject.GetObjectItemSet();
+}
+
+SfxStyleSheet* SdrText::GetStyleSheet() const
+{
+    return mrObject.GetStyleSheet();
+}
+
+void SdrText::dumpAsXml(xmlTextWriterPtr pWriter) const
+{
+    xmlTextWriterStartElement(pWriter, BAD_CAST("SdrText"));
+    mpOutlinerParaObject->dumpAsXml(pWriter);
+    xmlTextWriterEndElement(pWriter);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdtrans.cxx b/svx/source/svdraw/svdtrans.cxx
new file mode 100644
index 000000000..b47fda17b
--- /dev/null
+++ b/svx/source/svdraw/svdtrans.cxx
@@ -0,0 +1,926 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdtrans.hxx>
+#include <math.h>
+#include <svx/xpoly.hxx>
+#include <rtl/ustrbuf.hxx>
+
+#include <vcl/virdev.hxx>
+#include <tools/bigint.hxx>
+#include <unotools/syslocale.hxx>
+#include <unotools/localedatawrapper.hxx>
+#include <sal/log.hxx>
+
+void MoveXPoly(XPolygon& rPoly, const Size& S)
+{
+    rPoly.Move(S.Width(),S.Height());
+}
+
+void ResizeRect(tools::Rectangle& rRect, const Point& rRef, const Fraction& rxFact, const Fraction& ryFact)
+{
+    Fraction aXFact(rxFact);
+    Fraction aYFact(ryFact);
+
+    if (!aXFact.IsValid()) {
+        SAL_WARN( "svx.svdraw", "invalid fraction xFract, using Fraction(1,1)" );
+        aXFact = Fraction(1,1);
+        long nWdt = rRect.Right() - rRect.Left();
+        if (nWdt == 0) rRect.AdjustRight( 1 );
+    }
+    rRect.SetLeft( rRef.X() + FRound( (rRect.Left()  - rRef.X()) * double(aXFact) ) );
+    rRect.SetRight( rRef.X() + FRound( (rRect.Right() - rRef.X()) * double(aXFact) ) );
+
+    if (!aYFact.IsValid()) {
+        SAL_WARN( "svx.svdraw", "invalid fraction yFract, using Fraction(1,1)" );
+        aYFact = Fraction(1,1);
+        long nHgt = rRect.Bottom() - rRect.Top();
+        if (nHgt == 0) rRect.AdjustBottom( 1 );
+    }
+    rRect.SetTop( rRef.Y() + FRound( (rRect.Top()    - rRef.Y()) * double(aYFact) ) );
+    rRect.SetBottom( rRef.Y() + FRound( (rRect.Bottom() - rRef.Y()) * double(aYFact) ) );
+
+    rRect.Justify();
+}
+
+
+void ResizePoly(tools::Polygon& rPoly, const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    sal_uInt16 nCount=rPoly.GetSize();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        ResizePoint(rPoly[i],rRef,xFact,yFact);
+    }
+}
+
+void ResizeXPoly(XPolygon& rPoly, const Point& rRef, const Fraction& xFact, const Fraction& yFact)
+{
+    sal_uInt16 nCount=rPoly.GetPointCount();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        ResizePoint(rPoly[i],rRef,xFact,yFact);
+    }
+}
+
+void RotatePoly(tools::Polygon& rPoly, const Point& rRef, double sn, double cs)
+{
+    sal_uInt16 nCount=rPoly.GetSize();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        RotatePoint(rPoly[i],rRef,sn,cs);
+    }
+}
+
+void RotateXPoly(XPolygon& rPoly, const Point& rRef, double sn, double cs)
+{
+    sal_uInt16 nCount=rPoly.GetPointCount();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        RotatePoint(rPoly[i],rRef,sn,cs);
+    }
+}
+
+void RotateXPoly(XPolyPolygon& rPoly, const Point& rRef, double sn, double cs)
+{
+    sal_uInt16 nCount=rPoly.Count();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        RotateXPoly(rPoly[i],rRef,sn,cs);
+    }
+}
+
+void MirrorPoint(Point& rPnt, const Point& rRef1, const Point& rRef2)
+{
+    long mx=rRef2.X()-rRef1.X();
+    long my=rRef2.Y()-rRef1.Y();
+    if (mx==0) { // vertical axis
+        long dx=rRef1.X()-rPnt.X();
+        rPnt.AdjustX(2*dx );
+    } else if (my==0) { // horizontal axis
+        long dy=rRef1.Y()-rPnt.Y();
+        rPnt.AdjustY(2*dy );
+    } else if (mx==my) { // diagonal axis '\'
+        long dx1=rPnt.X()-rRef1.X();
+        long dy1=rPnt.Y()-rRef1.Y();
+        rPnt.setX(rRef1.X()+dy1 );
+        rPnt.setY(rRef1.Y()+dx1 );
+    } else if (mx==-my) { // diagonal axis '/'
+        long dx1=rPnt.X()-rRef1.X();
+        long dy1=rPnt.Y()-rRef1.Y();
+        rPnt.setX(rRef1.X()-dy1 );
+        rPnt.setY(rRef1.Y()-dx1 );
+    } else { // arbitrary axis
+        // TODO: Optimize this! Raise perpendicular on the mirroring axis..?
+        long nRefWink=GetAngle(rRef2-rRef1);
+        rPnt-=rRef1;
+        long nPntWink=GetAngle(rPnt);
+        long nAngle=2*(nRefWink-nPntWink);
+        double a = nAngle * F_PI18000;
+        double nSin=sin(a);
+        double nCos=cos(a);
+        RotatePoint(rPnt,Point(),nSin,nCos);
+        rPnt+=rRef1;
+    }
+}
+
+void MirrorXPoly(XPolygon& rPoly, const Point& rRef1, const Point& rRef2)
+{
+    sal_uInt16 nCount=rPoly.GetPointCount();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        MirrorPoint(rPoly[i],rRef1,rRef2);
+    }
+}
+
+void ShearPoly(tools::Polygon& rPoly, const Point& rRef, double tn)
+{
+    sal_uInt16 nCount=rPoly.GetSize();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        ShearPoint(rPoly[i],rRef,tn);
+    }
+}
+
+void ShearXPoly(XPolygon& rPoly, const Point& rRef, double tn, bool bVShear)
+{
+    sal_uInt16 nCount=rPoly.GetPointCount();
+    for (sal_uInt16 i=0; i<nCount; i++) {
+        ShearPoint(rPoly[i],rRef,tn,bVShear);
+    }
+}
+
+double CrookRotateXPoint(Point& rPnt, Point* pC1, Point* pC2, const Point& rCenter,
+                         const Point& rRad, double& rSin, double& rCos, bool bVert)
+{
+    bool bC1=pC1!=nullptr;
+    bool bC2=pC2!=nullptr;
+    long x0=rPnt.X();
+    long y0=rPnt.Y();
+    long cx=rCenter.X();
+    long cy=rCenter.Y();
+    double nAngle=GetCrookAngle(rPnt,rCenter,rRad,bVert);
+    double sn=sin(nAngle);
+    double cs=cos(nAngle);
+    RotatePoint(rPnt,rCenter,sn,cs);
+    if (bC1) {
+        if (bVert) {
+            // move into the direction of the center, as a basic position for the rotation
+            pC1->AdjustY( -y0 );
+            // resize, account for the distance from the center
+            pC1->setY(FRound(static_cast<double>(pC1->Y()) /rRad.X()*(cx-pC1->X())) );
+            pC1->AdjustY(cy );
+        } else {
+            // move into the direction of the center, as a basic position for the rotation
+            pC1->AdjustX( -x0 );
+            // resize, account for the distance from the center
+            long nPntRad=cy-pC1->Y();
+            double nFact=static_cast<double>(nPntRad)/static_cast<double>(rRad.Y());
+            pC1->setX(FRound(static_cast<double>(pC1->X())*nFact) );
+            pC1->AdjustX(cx );
+        }
+        RotatePoint(*pC1,rCenter,sn,cs);
+    }
+    if (bC2) {
+        if (bVert) {
+            // move into the direction of the center, as a basic position for the rotation
+            pC2->AdjustY( -y0 );
+            // resize, account for the distance from the center
+            pC2->setY(FRound(static_cast<double>(pC2->Y()) /rRad.X()*(rCenter.X()-pC2->X())) );
+            pC2->AdjustY(cy );
+        } else {
+            // move into the direction of the center, as a basic position for the rotation
+            pC2->AdjustX( -x0 );
+            // resize, account for the distance from the center
+            long nPntRad=rCenter.Y()-pC2->Y();
+            double nFact=static_cast<double>(nPntRad)/static_cast<double>(rRad.Y());
+            pC2->setX(FRound(static_cast<double>(pC2->X())*nFact) );
+            pC2->AdjustX(cx );
+        }
+        RotatePoint(*pC2,rCenter,sn,cs);
+    }
+    rSin=sn;
+    rCos=cs;
+    return nAngle;
+}
+
+double CrookSlantXPoint(Point& rPnt, Point* pC1, Point* pC2, const Point& rCenter,
+                        const Point& rRad, double& rSin, double& rCos, bool bVert)
+{
+    bool bC1=pC1!=nullptr;
+    bool bC2=pC2!=nullptr;
+    long x0=rPnt.X();
+    long y0=rPnt.Y();
+    long dx1=0,dy1=0;
+    long dxC1=0,dyC1=0;
+    long dxC2=0,dyC2=0;
+    if (bVert) {
+        long nStart=rCenter.X()-rRad.X();
+        dx1=rPnt.X()-nStart;
+        rPnt.setX(nStart );
+        if (bC1) {
+            dxC1=pC1->X()-nStart;
+            pC1->setX(nStart );
+        }
+        if (bC2) {
+            dxC2=pC2->X()-nStart;
+            pC2->setX(nStart );
+        }
+    } else {
+        long nStart=rCenter.Y()-rRad.Y();
+        dy1=rPnt.Y()-nStart;
+        rPnt.setY(nStart );
+        if (bC1) {
+            dyC1=pC1->Y()-nStart;
+            pC1->setY(nStart );
+        }
+        if (bC2) {
+            dyC2=pC2->Y()-nStart;
+            pC2->setY(nStart );
+        }
+    }
+    double nAngle=GetCrookAngle(rPnt,rCenter,rRad,bVert);
+    double sn=sin(nAngle);
+    double cs=cos(nAngle);
+    RotatePoint(rPnt,rCenter,sn,cs);
+    if (bC1) { if (bVert) pC1->AdjustY( -(y0-rCenter.Y()) ); else pC1->AdjustX( -(x0-rCenter.X()) ); RotatePoint(*pC1,rCenter,sn,cs); }
+    if (bC2) { if (bVert) pC2->AdjustY( -(y0-rCenter.Y()) ); else pC2->AdjustX( -(x0-rCenter.X()) ); RotatePoint(*pC2,rCenter,sn,cs); }
+    if (bVert) {
+        rPnt.AdjustX(dx1 );
+        if (bC1) pC1->AdjustX(dxC1 );
+        if (bC2) pC2->AdjustX(dxC2 );
+    } else {
+        rPnt.AdjustY(dy1 );
+        if (bC1) pC1->AdjustY(dyC1 );
+        if (bC2) pC2->AdjustY(dyC2 );
+    }
+    rSin=sn;
+    rCos=cs;
+    return nAngle;
+}
+
+double CrookStretchXPoint(Point& rPnt, Point* pC1, Point* pC2, const Point& rCenter,
+                          const Point& rRad, double& rSin, double& rCos, bool bVert,
+                          const tools::Rectangle& rRefRect)
+{
+    long y0=rPnt.Y();
+    CrookSlantXPoint(rPnt,pC1,pC2,rCenter,rRad,rSin,rCos,bVert);
+    if (bVert) {
+    } else {
+        long nTop=rRefRect.Top();
+        long nBtm=rRefRect.Bottom();
+        long nHgt=nBtm-nTop;
+        long dy=rPnt.Y()-y0;
+        double a=static_cast<double>(y0-nTop)/nHgt;
+        a*=dy;
+        rPnt.setY(y0+FRound(a) );
+    }
+    return 0.0;
+}
+
+
+void CrookRotatePoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad, bool bVert)
+{
+    double nSin,nCos;
+    sal_uInt16 nPointCnt=rPoly.GetPointCount();
+    sal_uInt16 i=0;
+    while (i<nPointCnt) {
+        Point* pPnt=&rPoly[i];
+        Point* pC1=nullptr;
+        Point* pC2=nullptr;
+        if (i+1<nPointCnt && rPoly.IsControl(i)) { // control point to the left
+            pC1=pPnt;
+            i++;
+            pPnt=&rPoly[i];
+        }
+        i++;
+        if (i<nPointCnt && rPoly.IsControl(i)) { // control point to the right
+            pC2=&rPoly[i];
+            i++;
+        }
+        CrookRotateXPoint(*pPnt,pC1,pC2,rCenter,rRad,nSin,nCos,bVert);
+    }
+}
+
+void CrookSlantPoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad, bool bVert)
+{
+    double nSin,nCos;
+    sal_uInt16 nPointCnt=rPoly.GetPointCount();
+    sal_uInt16 i=0;
+    while (i<nPointCnt) {
+        Point* pPnt=&rPoly[i];
+        Point* pC1=nullptr;
+        Point* pC2=nullptr;
+        if (i+1<nPointCnt && rPoly.IsControl(i)) { // control point to the left
+            pC1=pPnt;
+            i++;
+            pPnt=&rPoly[i];
+        }
+        i++;
+        if (i<nPointCnt && rPoly.IsControl(i)) { // control point to the right
+            pC2=&rPoly[i];
+            i++;
+        }
+        CrookSlantXPoint(*pPnt,pC1,pC2,rCenter,rRad,nSin,nCos,bVert);
+    }
+}
+
+void CrookStretchPoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad, bool bVert, const tools::Rectangle& rRefRect)
+{
+    double nSin,nCos;
+    sal_uInt16 nPointCnt=rPoly.GetPointCount();
+    sal_uInt16 i=0;
+    while (i<nPointCnt) {
+        Point* pPnt=&rPoly[i];
+        Point* pC1=nullptr;
+        Point* pC2=nullptr;
+        if (i+1<nPointCnt && rPoly.IsControl(i)) { //  control point to the left
+            pC1=pPnt;
+            i++;
+            pPnt=&rPoly[i];
+        }
+        i++;
+        if (i<nPointCnt && rPoly.IsControl(i)) { // control point to the right
+            pC2=&rPoly[i];
+            i++;
+        }
+        CrookStretchXPoint(*pPnt,pC1,pC2,rCenter,rRad,nSin,nCos,bVert,rRefRect);
+    }
+}
+
+
+void CrookRotatePoly(XPolyPolygon& rPoly, const Point& rCenter, const Point& rRad, bool bVert)
+{
+    sal_uInt16 nPolyCount=rPoly.Count();
+    for (sal_uInt16 nPolyNum=0; nPolyNum<nPolyCount; nPolyNum++) {
+        CrookRotatePoly(rPoly[nPolyNum],rCenter,rRad,bVert);
+    }
+}
+
+void CrookSlantPoly(XPolyPolygon& rPoly, const Point& rCenter, const Point& rRad, bool bVert)
+{
+    sal_uInt16 nPolyCount=rPoly.Count();
+    for (sal_uInt16 nPolyNum=0; nPolyNum<nPolyCount; nPolyNum++) {
+        CrookSlantPoly(rPoly[nPolyNum],rCenter,rRad,bVert);
+    }
+}
+
+void CrookStretchPoly(XPolyPolygon& rPoly, const Point& rCenter, const Point& rRad, bool bVert, const tools::Rectangle& rRefRect)
+{
+    sal_uInt16 nPolyCount=rPoly.Count();
+    for (sal_uInt16 nPolyNum=0; nPolyNum<nPolyCount; nPolyNum++) {
+        CrookStretchPoly(rPoly[nPolyNum],rCenter,rRad,bVert,rRefRect);
+    }
+}
+
+
+long GetAngle(const Point& rPnt)
+{
+    long a=0;
+    if (rPnt.Y()==0) {
+        if (rPnt.X()<0) a=-18000;
+    } else if (rPnt.X()==0) {
+        if (rPnt.Y()>0) a=-9000;
+        else a=9000;
+    } else {
+        a = FRound(atan2(static_cast<double>(-rPnt.Y()), static_cast<double>(rPnt.X()))
+                   / F_PI18000);
+    }
+    return a;
+}
+
+long NormAngle18000(long a)
+{
+    while (a<-18000) a+=36000;
+    while (a>=18000) a-=36000;
+    return a;
+}
+
+long NormAngle36000(long a)
+{
+    while (a<0) a+=36000;
+    while (a>=36000) a-=36000;
+    return a;
+}
+
+sal_uInt16 GetAngleSector(long nAngle)
+{
+    while (nAngle<0) nAngle+=36000;
+    while (nAngle>=36000) nAngle-=36000;
+    if (nAngle< 9000) return 0;
+    if (nAngle<18000) return 1;
+    if (nAngle<27000) return 2;
+    return 3;
+}
+
+long GetLen(const Point& rPnt)
+{
+    long x=std::abs(rPnt.X());
+    long y=std::abs(rPnt.Y());
+    if (x+y<0x8000) { // because 7FFF * 7FFF * 2 = 7FFE0002
+        x*=x;
+        y*=y;
+        x+=y;
+        x=FRound(sqrt(static_cast<double>(x)));
+        return x;
+    } else {
+        double nx=x;
+        double ny=y;
+        nx*=nx;
+        ny*=ny;
+        nx+=ny;
+        nx=sqrt(nx);
+        if (nx>0x7FFFFFFF) {
+            return 0x7FFFFFFF; // we can't go any further, for fear of an overrun!
+        } else {
+            return FRound(nx);
+        }
+    }
+}
+
+
+void GeoStat::RecalcSinCos()
+{
+    if (nRotationAngle==0) {
+        nSin=0.0;
+        nCos=1.0;
+    } else {
+        double a = nRotationAngle * F_PI18000;
+        nSin=sin(a);
+        nCos=cos(a);
+    }
+}
+
+void GeoStat::RecalcTan()
+{
+    if (nShearAngle==0) {
+        nTan=0.0;
+    } else {
+        double a = nShearAngle * F_PI18000;
+        nTan=tan(a);
+    }
+}
+
+
+tools::Polygon Rect2Poly(const tools::Rectangle& rRect, const GeoStat& rGeo)
+{
+    tools::Polygon aPol(5);
+    aPol[0]=rRect.TopLeft();
+    aPol[1]=rRect.TopRight();
+    aPol[2]=rRect.BottomRight();
+    aPol[3]=rRect.BottomLeft();
+    aPol[4]=rRect.TopLeft();
+    if (rGeo.nShearAngle!=0) ShearPoly(aPol,rRect.TopLeft(),rGeo.nTan);
+    if (rGeo.nRotationAngle!=0) RotatePoly(aPol,rRect.TopLeft(),rGeo.nSin,rGeo.nCos);
+    return aPol;
+}
+
+void Poly2Rect(const tools::Polygon& rPol, tools::Rectangle& rRect, GeoStat& rGeo)
+{
+    rGeo.nRotationAngle=GetAngle(rPol[1]-rPol[0]);
+    rGeo.nRotationAngle=NormAngle36000(rGeo.nRotationAngle);
+    // rotation successful
+    rGeo.RecalcSinCos();
+
+    Point aPt1(rPol[1]-rPol[0]);
+    if (rGeo.nRotationAngle!=0) RotatePoint(aPt1,Point(0,0),-rGeo.nSin,rGeo.nCos); // -Sin to reverse rotation
+    long nWdt=aPt1.X();
+
+    Point aPt0(rPol[0]);
+    Point aPt3(rPol[3]-rPol[0]);
+    if (rGeo.nRotationAngle!=0) RotatePoint(aPt3,Point(0,0),-rGeo.nSin,rGeo.nCos); // -Sin to reverse rotation
+    long nHgt=aPt3.Y();
+
+
+    long nShW=GetAngle(aPt3);
+    nShW-=27000; // ShearWink is measured against a vertical line
+    nShW=-nShW;  // negating, because '+' is shearing clock-wise
+
+    bool bMirr=aPt3.Y()<0;
+    if (bMirr) { // "exchange of points" when mirroring
+        nHgt=-nHgt;
+        nShW+=18000;
+        aPt0=rPol[3];
+    }
+    nShW=NormAngle18000(nShW);
+    if (nShW<-9000 || nShW>9000) {
+        nShW=NormAngle18000(nShW+18000);
+    }
+    if (nShW<-SDRMAXSHEAR) nShW=-SDRMAXSHEAR; // limit ShearWinkel (shear angle) to +/- 89.00 deg
+    if (nShW>SDRMAXSHEAR)  nShW=SDRMAXSHEAR;
+    rGeo.nShearAngle=nShW;
+    rGeo.RecalcTan();
+    Point aRU(aPt0);
+    aRU.AdjustX(nWdt );
+    aRU.AdjustY(nHgt );
+    rRect=tools::Rectangle(aPt0,aRU);
+}
+
+
+void OrthoDistance8(const Point& rPt0, Point& rPt, bool bBigOrtho)
+{
+    long dx=rPt.X()-rPt0.X();
+    long dy=rPt.Y()-rPt0.Y();
+    long dxa=std::abs(dx);
+    long dya=std::abs(dy);
+    if (dx==0 || dy==0 || dxa==dya) return;
+    if (dxa>=dya*2) { rPt.setY(rPt0.Y() ); return; }
+    if (dya>=dxa*2) { rPt.setX(rPt0.X() ); return; }
+    if ((dxa<dya) != bBigOrtho) {
+        rPt.setY(rPt0.Y()+(dxa* (dy>=0 ? 1 : -1) ) );
+    } else {
+        rPt.setX(rPt0.X()+(dya* (dx>=0 ? 1 : -1) ) );
+    }
+}
+
+void OrthoDistance4(const Point& rPt0, Point& rPt, bool bBigOrtho)
+{
+    long dx=rPt.X()-rPt0.X();
+    long dy=rPt.Y()-rPt0.Y();
+    long dxa=std::abs(dx);
+    long dya=std::abs(dy);
+    if ((dxa<dya) != bBigOrtho) {
+        rPt.setY(rPt0.Y()+(dxa* (dy>=0 ? 1 : -1) ) );
+    } else {
+        rPt.setX(rPt0.X()+(dya* (dx>=0 ? 1 : -1) ) );
+    }
+}
+
+
+long BigMulDiv(long nVal, long nMul, long nDiv)
+{
+    BigInt aVal(nVal);
+    aVal*=nMul;
+    if (aVal.IsNeg()!=(nDiv<0)) {
+        aVal-=nDiv/2; // to round correctly
+    } else {
+        aVal+=nDiv/2; // to round correctly
+    }
+    if(nDiv)
+    {
+        aVal/=nDiv;
+        return long(aVal);
+    }
+    return 0x7fffffff;
+}
+
+// How many eU units fit into a mm, respectively an inch?
+// Or: How many mm, respectively inches, are there in an eU (and then give me the inverse)
+
+static FrPair GetInchOrMM(MapUnit eU)
+{
+    switch (eU) {
+        case MapUnit::Map1000thInch: return FrPair(1000,1);
+        case MapUnit::Map100thInch : return FrPair( 100,1);
+        case MapUnit::Map10thInch  : return FrPair(  10,1);
+        case MapUnit::MapInch       : return FrPair(   1,1);
+        case MapUnit::MapPoint      : return FrPair(  72,1);
+        case MapUnit::MapTwip       : return FrPair(1440,1);
+        case MapUnit::Map100thMM   : return FrPair( 100,1);
+        case MapUnit::Map10thMM    : return FrPair(  10,1);
+        case MapUnit::MapMM         : return FrPair(   1,1);
+        case MapUnit::MapCM         : return FrPair(   1,10);
+        case MapUnit::MapPixel      : {
+            ScopedVclPtrInstance< VirtualDevice > pVD;
+            pVD->SetMapMode(MapMode(MapUnit::Map100thMM));
+            Point aP(pVD->PixelToLogic(Point(64,64))); // 64 pixels for more accuracy
+            return FrPair(6400,aP.X(),6400,aP.Y());
+        }
+        case MapUnit::MapAppFont: case MapUnit::MapSysFont: {
+            ScopedVclPtrInstance< VirtualDevice > pVD;
+            pVD->SetMapMode(MapMode(eU));
+            Point aP(pVD->LogicToPixel(Point(32,32))); // 32 units for more accuracy
+            pVD->SetMapMode(MapMode(MapUnit::Map100thMM));
+            aP=pVD->PixelToLogic(aP);
+            return FrPair(3200,aP.X(),3200,aP.Y());
+        }
+        default: break;
+    }
+    return Fraction(1,1);
+}
+
+static FrPair GetInchOrMM(FieldUnit eU)
+{
+    switch (eU) {
+        case FieldUnit::INCH       : return FrPair(   1,1);
+        case FieldUnit::POINT      : return FrPair(  72,1);
+        case FieldUnit::TWIP       : return FrPair(1440,1);
+        case FieldUnit::MM_100TH   : return FrPair( 100,1);
+        case FieldUnit::MM         : return FrPair(   1,1);
+        case FieldUnit::CM         : return FrPair(   1,10);
+        case FieldUnit::M          : return FrPair(   1,1000);
+        case FieldUnit::KM         : return FrPair(   1,1000000);
+        case FieldUnit::PICA       : return FrPair(   6,1);
+        case FieldUnit::FOOT       : return FrPair(   1,12);
+        case FieldUnit::MILE       : return FrPair(   1,63360);
+        default: break;
+    }
+    return Fraction(1,1);
+}
+
+// Calculate the factor that we need to convert units from eS to eD.
+// e. g. GetMapFactor(UNIT_MM,UNIT_100TH_MM) => 100.
+
+FrPair GetMapFactor(MapUnit eS, MapUnit eD)
+{
+    if (eS==eD) return FrPair(1,1,1,1);
+    FrPair aS(GetInchOrMM(eS));
+    FrPair aD(GetInchOrMM(eD));
+    bool bSInch=IsInch(eS);
+    bool bDInch=IsInch(eD);
+    FrPair aRet(aD.X()/aS.X(),aD.Y()/aS.Y());
+    if (bSInch && !bDInch) { aRet.X()*=Fraction(127,5); aRet.Y()*=Fraction(127,5); }
+    if (!bSInch && bDInch) { aRet.X()*=Fraction(5,127); aRet.Y()*=Fraction(5,127); }
+    return aRet;
+};
+
+FrPair GetMapFactor(FieldUnit eS, FieldUnit eD)
+{
+    if (eS==eD) return FrPair(1,1,1,1);
+    FrPair aS(GetInchOrMM(eS));
+    FrPair aD(GetInchOrMM(eD));
+    bool bSInch=IsInch(eS);
+    bool bDInch=IsInch(eD);
+    FrPair aRet(aD.X()/aS.X(),aD.Y()/aS.Y());
+    if (bSInch && !bDInch) { aRet.X()*=Fraction(127,5); aRet.Y()*=Fraction(127,5); }
+    if (!bSInch && bDInch) { aRet.X()*=Fraction(5,127); aRet.Y()*=Fraction(5,127); }
+    return aRet;
+};
+
+
+    // 1 mile    =  8 furlong = 63.360" = 1.609.344,0mm
+    // 1 furlong = 10 chains  =  7.920" =   201.168,0mm
+    // 1 chain   =  4 poles   =    792" =    20.116,8mm
+    // 1 pole    =  5 1/2 yd  =    198" =     5.029,2mm
+    // 1 yd      =  3 ft      =     36" =       914,4mm
+    // 1 ft      = 12 "       =      1" =       304,8mm
+
+static void GetMeterOrInch(MapUnit eMU, short& rnComma, long& rnMul, long& rnDiv, bool& rbMetr, bool& rbInch)
+{
+    rnMul=1; rnDiv=1;
+    short nComma=0;
+    bool bMetr = false, bInch = false;
+    switch (eMU) {
+        // Metrically
+        case MapUnit::Map100thMM   : bMetr = true; nComma=5; break;
+        case MapUnit::Map10thMM    : bMetr = true; nComma=4; break;
+        case MapUnit::MapMM         : bMetr = true; nComma=3; break;
+        case MapUnit::MapCM         : bMetr = true; nComma=2; break;
+        // Inch
+        case MapUnit::Map1000thInch: bInch = true; nComma=3; break;
+        case MapUnit::Map100thInch : bInch = true; nComma=2; break;
+        case MapUnit::Map10thInch  : bInch = true; nComma=1; break;
+        case MapUnit::MapInch       : bInch = true; nComma=0; break;
+        case MapUnit::MapPoint      : bInch = true; rnDiv=72;  break;          // 1Pt   = 1/72"
+        case MapUnit::MapTwip       : bInch = true; rnDiv=144; nComma=1; break; // 1Twip = 1/1440"
+        // Others
+        case MapUnit::MapPixel      : break;
+        case MapUnit::MapSysFont    : break;
+        case MapUnit::MapAppFont    : break;
+        case MapUnit::MapRelative   : break;
+        default: break;
+    } // switch
+    rnComma=nComma;
+    rbMetr=bMetr;
+    rbInch=bInch;
+}
+
+
+void SdrFormatter::Undirty()
+{
+    bool bSrcMetr,bSrcInch,bDstMetr,bDstInch;
+    long nMul1,nDiv1,nMul2,nDiv2;
+    short nComma1,nComma2;
+    // first: normalize to m or in
+    GetMeterOrInch(eSrcMU,nComma1,nMul1,nDiv1,bSrcMetr,bSrcInch);
+    GetMeterOrInch(eDstMU,nComma2,nMul2,nDiv2,bDstMetr,bDstInch);
+    nMul1*=nDiv2;
+    nDiv1*=nMul2;
+    nComma1=nComma1-nComma2;
+
+    if (bSrcInch && bDstMetr) {
+        nComma1+=4;
+        nMul1*=254;
+    }
+    if (bSrcMetr && bDstInch) {
+        nComma1-=4;
+        nDiv1*=254;
+    }
+
+    // temporary fraction for canceling
+    Fraction aTempFract(nMul1,nDiv1);
+    nMul1=aTempFract.GetNumerator();
+    nDiv1=aTempFract.GetDenominator();
+
+    nMul_=nMul1;
+    nDiv_=nDiv1;
+    nComma_=nComma1;
+    bDirty=false;
+}
+
+
+OUString SdrFormatter::GetStr(long nVal) const
+{
+    const OUString aNullCode("0");
+
+    if(!nVal)
+    {
+        return aNullCode;
+    }
+
+    // we may lose some decimal places here, because of MulDiv instead of Real
+    bool bNeg(nVal < 0);
+    SvtSysLocale aSysLoc;
+    const LocaleDataWrapper& rLoc = aSysLoc.GetLocaleData();
+
+    if (bDirty)
+        const_cast<SdrFormatter*>(this)->Undirty();
+
+    sal_Int16 nC(nComma_);
+
+    if(bNeg)
+        nVal = -nVal;
+
+    while(nC <= -3)
+    {
+        nVal *= 1000;
+        nC += 3;
+    }
+
+    while(nC <= -1)
+    {
+        nVal *= 10;
+        nC++;
+    }
+
+    if(nMul_ != nDiv_)
+        nVal = BigMulDiv(nVal, nMul_, nDiv_);
+
+    OUStringBuffer aStr = OUString::number(nVal);
+
+    if(nC > 0 && aStr.getLength() <= nC )
+    {
+        // decimal separator necessary
+        sal_Int32 nCount(nC - aStr.getLength());
+
+        if(nCount >= 0 && LocaleDataWrapper::isNumLeadingZero())
+            nCount++;
+
+        for(sal_Int32  i=0; i<nCount; i++)
+            aStr.insert(0, aNullCode);
+
+        // remove superfluous decimal points
+        sal_Int32 nNumDigits(LocaleDataWrapper::getNumDigits());
+        sal_Int32 nWeg(nC - nNumDigits);
+
+        if(nWeg > 0)
+        {
+            // TODO: we should round here
+            aStr.remove(aStr.getLength() - nWeg, nWeg);
+            nC = nNumDigits;
+        }
+    }
+
+    // remember everything before the decimal separator for later
+    sal_Int32 nForComma(aStr.getLength() - nC);
+
+    if(nC > 0)
+    {
+        // insert comma char (decimal separator)
+        // remove trailing zeros
+        while(nC > 0 && aStr[aStr.getLength() - 1] == aNullCode[0])
+        {
+            aStr.remove(aStr.getLength() - 1, 1);
+            nC--;
+        }
+
+        if(nC > 0)
+        {
+            // do we still have decimal places?
+            sal_Unicode cDec(rLoc.getNumDecimalSep()[0]);
+            aStr.insert(nForComma, cDec);
+        }
+    }
+
+    // add in thousands separator (if necessary)
+    if( nForComma > 3 )
+    {
+        const OUString& aThoSep( rLoc.getNumThousandSep() );
+        if ( aThoSep.getLength() > 0 )
+        {
+            sal_Unicode cTho( aThoSep[0] );
+            sal_Int32 i(nForComma - 3);
+
+            while(i > 0)
+            {
+                aStr.insert(i, cTho);
+                i -= 3;
+            }
+        }
+    }
+
+    if(aStr.isEmpty())
+        aStr.append(aNullCode);
+
+    if(bNeg && (aStr.getLength() > 1 || aStr[0] != aNullCode[0]))
+    {
+        aStr.insert(0, "-");
+    }
+
+    return aStr.makeStringAndClear();
+}
+
+OUString SdrFormatter::GetUnitStr(MapUnit eUnit)
+{
+    switch(eUnit)
+    {
+        // metrically
+        case MapUnit::Map100thMM   :
+            return "/100mm";
+        case MapUnit::Map10thMM    :
+            return "/10mm";
+        case MapUnit::MapMM         :
+            return "mm";
+        case MapUnit::MapCM         :
+            return "cm";
+
+        // Inch
+        case MapUnit::Map1000thInch:
+            return "/1000\"";
+        case MapUnit::Map100thInch :
+            return "/100\"";
+        case MapUnit::Map10thInch  :
+            return "/10\"";
+        case MapUnit::MapInch       :
+            return "\"";
+        case MapUnit::MapPoint      :
+            return "pt";
+        case MapUnit::MapTwip       :
+            return "twip";
+
+        // others
+        case MapUnit::MapPixel      :
+            return "pixel";
+        case MapUnit::MapSysFont    :
+            return "sysfont";
+        case MapUnit::MapAppFont    :
+            return "appfont";
+        case MapUnit::MapRelative   :
+            return "%";
+        default:
+            return OUString();
+    }
+}
+
+OUString SdrFormatter::GetUnitStr(FieldUnit eUnit)
+{
+    switch(eUnit)
+    {
+        default             :
+        case FieldUnit::NONE     :
+        case FieldUnit::CUSTOM   :
+            return OUString();
+
+        // metrically
+        case FieldUnit::MM_100TH:
+            return "/100mm";
+        case FieldUnit::MM     :
+            return "mm";
+        case FieldUnit::CM     :
+            return "cm";
+        case FieldUnit::M      :
+            return "m";
+        case FieldUnit::KM     :
+            return "km";
+
+        // Inch
+        case FieldUnit::TWIP   :
+            return "twip";
+        case FieldUnit::POINT  :
+            return "pt";
+        case FieldUnit::PICA   :
+            return "pica";
+        case FieldUnit::INCH   :
+            return "\"";
+        case FieldUnit::FOOT   :
+            return "ft";
+        case FieldUnit::MILE   :
+            return "mile(s)";
+
+        // others
+        case FieldUnit::PERCENT:
+            return "%";
+    }
+}
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdundo.cxx b/svx/source/svdraw/svdundo.cxx
new file mode 100644
index 000000000..980dbc970
--- /dev/null
+++ b/svx/source/svdraw/svdundo.cxx
@@ -0,0 +1,1751 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <com/sun/star/drawing/FillStyle.hpp>
+
+#include <svx/svdundo.hxx>
+#include <svx/svdotext.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdlayer.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdview.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/scene3d.hxx>
+#include <editeng/outlobj.hxx>
+#include <svx/svdogrp.hxx>
+#include <sdr/properties/itemsettools.hxx>
+#include <svx/sdr/properties/properties.hxx>
+#include <svx/svdocapt.hxx>
+#include <svl/whiter.hxx>
+#include <svx/e3dsceneupdater.hxx>
+#include <svx/svdviter.hxx>
+#include <svx/svdotable.hxx> // #i124389#
+#include <vcl/svapp.hxx>
+#include <sfx2/viewsh.hxx>
+#include <svx/svdoashp.hxx>
+
+
+// iterates over all views and unmarks this SdrObject if it is marked
+static void ImplUnmarkObject( SdrObject* pObj )
+{
+    SdrViewIter aIter( pObj );
+    for ( SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView() )
+    {
+        pView->MarkObj( pObj, pView->GetSdrPageView(), true );
+    }
+}
+
+SdrUndoAction::SdrUndoAction(SdrModel& rNewMod)
+    : rMod(rNewMod), m_nViewShellId(-1)
+{
+    if (SfxViewShell* pViewShell = SfxViewShell::Current())
+        m_nViewShellId = pViewShell->GetViewShellId();
+}
+
+SdrUndoAction::~SdrUndoAction() {}
+
+bool SdrUndoAction::CanRepeat(SfxRepeatTarget& rView) const
+{
+    SdrView* pV=dynamic_cast<SdrView*>( &rView );
+    if (pV!=nullptr) return CanSdrRepeat(*pV);
+    return false;
+}
+
+void SdrUndoAction::Repeat(SfxRepeatTarget& rView)
+{
+    SdrView* pV=dynamic_cast<SdrView*>( &rView );
+    if (pV!=nullptr) SdrRepeat(*pV);
+    DBG_ASSERT(pV!=nullptr,"Repeat: SfxRepeatTarget that was handed over is not a SdrView");
+}
+
+OUString SdrUndoAction::GetRepeatComment(SfxRepeatTarget& rView) const
+{
+    SdrView* pV=dynamic_cast<SdrView*>( &rView );
+    if (pV!=nullptr) return GetSdrRepeatComment();
+    return OUString();
+}
+
+bool SdrUndoAction::CanSdrRepeat(SdrView& /*rView*/) const
+{
+    return false;
+}
+
+void SdrUndoAction::SdrRepeat(SdrView& /*rView*/)
+{
+}
+
+OUString SdrUndoAction::GetSdrRepeatComment() const
+{
+    return OUString();
+}
+
+ViewShellId SdrUndoAction::GetViewShellId() const
+{
+    return m_nViewShellId;
+}
+
+SdrUndoGroup::SdrUndoGroup(SdrModel& rNewMod)
+:   SdrUndoAction(rNewMod),
+    eFunction(SdrRepeatFunc::NONE)
+{}
+
+SdrUndoGroup::~SdrUndoGroup()
+{
+}
+
+void SdrUndoGroup::AddAction(std::unique_ptr<SdrUndoAction> pAct)
+{
+    maActions.push_back(std::move(pAct));
+}
+
+void SdrUndoGroup::Undo()
+{
+    for (auto it = maActions.rbegin(); it != maActions.rend(); ++it)
+        (*it)->Undo();
+}
+
+void SdrUndoGroup::Redo()
+{
+    for (std::unique_ptr<SdrUndoAction> & pAction : maActions)
+        pAction->Redo();
+}
+
+OUString SdrUndoGroup::GetComment() const
+{
+    return aComment.replaceAll("%1", aObjDescription);
+}
+
+bool SdrUndoGroup::CanSdrRepeat(SdrView& rView) const
+{
+    switch (eFunction)
+    {
+    case SdrRepeatFunc::NONE           :  return false;
+    case SdrRepeatFunc::Delete         :  return rView.AreObjectsMarked();
+    case SdrRepeatFunc::CombinePolyPoly:  return rView.IsCombinePossible();
+    case SdrRepeatFunc::CombineOnePoly :  return rView.IsCombinePossible(true);
+    case SdrRepeatFunc::DismantlePolys :  return rView.IsDismantlePossible();
+    case SdrRepeatFunc::DismantleLines :  return rView.IsDismantlePossible(true);
+    case SdrRepeatFunc::ConvertToPoly  :  return rView.IsConvertToPolyObjPossible();
+    case SdrRepeatFunc::ConvertToPath  :  return rView.IsConvertToPathObjPossible();
+    case SdrRepeatFunc::Group          :  return rView.IsGroupPossible();
+    case SdrRepeatFunc::Ungroup        :  return rView.IsUnGroupPossible();
+    case SdrRepeatFunc::PutToTop       :  return rView.IsToTopPossible();
+    case SdrRepeatFunc::PutToBottom    :  return rView.IsToBtmPossible();
+    case SdrRepeatFunc::MoveToTop      :  return rView.IsToTopPossible();
+    case SdrRepeatFunc::MoveToBottom   :  return rView.IsToBtmPossible();
+    case SdrRepeatFunc::ReverseOrder   :  return rView.IsReverseOrderPossible();
+    case SdrRepeatFunc::ImportMtf      :  return rView.IsImportMtfPossible();
+    default: break;
+    } // switch
+    return false;
+}
+
+void SdrUndoGroup::SdrRepeat(SdrView& rView)
+{
+    switch (eFunction)
+    {
+    case SdrRepeatFunc::NONE            :  break;
+    case SdrRepeatFunc::Delete          :  rView.DeleteMarked();                break;
+    case SdrRepeatFunc::CombinePolyPoly :  rView.CombineMarkedObjects(false);   break;
+    case SdrRepeatFunc::CombineOnePoly  :  rView.CombineMarkedObjects();        break;
+    case SdrRepeatFunc::DismantlePolys  :  rView.DismantleMarkedObjects();      break;
+    case SdrRepeatFunc::DismantleLines  :  rView.DismantleMarkedObjects(true);  break;
+    case SdrRepeatFunc::ConvertToPoly   :  rView.ConvertMarkedToPolyObj();      break;
+    case SdrRepeatFunc::ConvertToPath   :  rView.ConvertMarkedToPathObj(false); break;
+    case SdrRepeatFunc::Group           :  rView.GroupMarked();                 break;
+    case SdrRepeatFunc::Ungroup         :  rView.UnGroupMarked();               break;
+    case SdrRepeatFunc::PutToTop        :  rView.PutMarkedToTop();              break;
+    case SdrRepeatFunc::PutToBottom     :  rView.PutMarkedToBtm();              break;
+    case SdrRepeatFunc::MoveToTop       :  rView.MovMarkedToTop();              break;
+    case SdrRepeatFunc::MoveToBottom    :  rView.MovMarkedToBtm();              break;
+    case SdrRepeatFunc::ReverseOrder    :  rView.ReverseOrderOfMarked();        break;
+    case SdrRepeatFunc::ImportMtf       :  rView.DoImportMarkedMtf();           break;
+    default: break;
+    } // switch
+}
+
+OUString SdrUndoGroup::GetSdrRepeatComment() const
+{
+    return aComment.replaceAll("%1", SvxResId(STR_ObjNameSingulPlural));
+}
+
+SdrUndoObj::SdrUndoObj(SdrObject& rNewObj)
+:   SdrUndoAction(rNewObj.getSdrModelFromSdrObject())
+    ,pObj(&rNewObj)
+{
+}
+
+OUString SdrUndoObj::GetDescriptionStringForObject( const SdrObject& _rForObject, const char* pStrCacheID, bool bRepeat )
+{
+    const OUString rStr {SvxResId(pStrCacheID)};
+
+    const sal_Int32 nPos = rStr.indexOf("%1");
+    if (nPos < 0)
+        return rStr;
+
+    if (bRepeat)
+        return rStr.replaceAt(nPos, 2, SvxResId(STR_ObjNameSingulPlural));
+
+    return rStr.replaceAt(nPos, 2, _rForObject.TakeObjNameSingul());
+}
+
+OUString SdrUndoObj::ImpGetDescriptionStr(const char* pStrCacheID, bool bRepeat) const
+{
+    if ( pObj )
+        return GetDescriptionStringForObject( *pObj, pStrCacheID, bRepeat );
+    return OUString();
+}
+
+// common call method for possible change of the page when UNDO/REDO is triggered
+void SdrUndoObj::ImpShowPageOfThisObject()
+{
+    if(pObj && pObj->IsInserted() && pObj->getSdrPageFromSdrObject())
+    {
+        SdrHint aHint(SdrHintKind::SwitchToPage, *pObj, pObj->getSdrPageFromSdrObject());
+        pObj->getSdrModelFromSdrObject().Broadcast(aHint);
+    }
+}
+
+void SdrUndoAttrObj::ensureStyleSheetInStyleSheetPool(SfxStyleSheetBasePool& rStyleSheetPool, SfxStyleSheet& rSheet)
+{
+    SfxStyleSheetBase* pThere = rStyleSheetPool.Find(rSheet.GetName(), rSheet.GetFamily());
+
+    if(!pThere)
+    {
+        // re-insert remembered style which was removed in the meantime. To do this
+        // without assertion, do it without parent and set parent after insertion
+        const OUString aParent(rSheet.GetParent());
+
+        rSheet.SetParent(OUString());
+        rStyleSheetPool.Insert(&rSheet);
+        rSheet.SetParent(aParent);
+    }
+}
+
+SdrUndoAttrObj::SdrUndoAttrObj(SdrObject& rNewObj, bool bStyleSheet1, bool bSaveText)
+    : SdrUndoObj(rNewObj)
+    , mxUndoStyleSheet()
+    , mxRedoStyleSheet()
+    , bHaveToTakeRedoSet(true)
+{
+    bStyleSheet = bStyleSheet1;
+
+    SdrObjList* pOL = rNewObj.GetSubList();
+    bool bIsGroup(pOL!=nullptr && pOL->GetObjCount());
+    bool bIs3DScene(bIsGroup && dynamic_cast< E3dScene* >(pObj) !=  nullptr);
+
+    if(bIsGroup)
+    {
+        // it's a group object!
+        pUndoGroup.reset(new SdrUndoGroup(pObj->getSdrModelFromSdrObject()));
+        const size_t nObjCount(pOL->GetObjCount());
+
+        for(size_t nObjNum = 0; nObjNum < nObjCount; ++nObjNum)
+        {
+            pUndoGroup->AddAction(
+                std::make_unique<SdrUndoAttrObj>(*pOL->GetObj(nObjNum), bStyleSheet1));
+        }
+    }
+
+    if(!bIsGroup || bIs3DScene)
+    {
+        pUndoSet.reset( new SfxItemSet(pObj->GetMergedItemSet()) );
+
+        if(bStyleSheet)
+            mxUndoStyleSheet = pObj->GetStyleSheet();
+
+        if(bSaveText)
+        {
+            auto p = pObj->GetOutlinerParaObject();
+            if(p)
+                pTextUndo.reset( new OutlinerParaObject(*p) );
+        }
+    }
+}
+
+SdrUndoAttrObj::~SdrUndoAttrObj()
+{
+    pUndoSet.reset();
+    pRedoSet.reset();
+    pUndoGroup.reset();
+    pTextUndo.reset();
+    pTextRedo.reset();
+}
+
+void SdrUndoAttrObj::Undo()
+{
+    E3DModifySceneSnapRectUpdater aUpdater(pObj);
+    bool bIs3DScene(dynamic_cast< E3dScene* >(pObj) !=  nullptr);
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    if(!pUndoGroup || bIs3DScene)
+    {
+        if(bHaveToTakeRedoSet)
+        {
+            bHaveToTakeRedoSet = false;
+
+            pRedoSet.reset( new SfxItemSet(pObj->GetMergedItemSet()) );
+
+            if(bStyleSheet)
+                mxRedoStyleSheet = pObj->GetStyleSheet();
+
+            if(pTextUndo)
+            {
+                // #i8508#
+                auto p = pObj->GetOutlinerParaObject();
+                if(p)
+                    pTextRedo.reset( new OutlinerParaObject(*p) );
+            }
+        }
+
+        if(bStyleSheet)
+        {
+            mxRedoStyleSheet = pObj->GetStyleSheet();
+            SfxStyleSheet* pSheet = dynamic_cast< SfxStyleSheet* >(mxUndoStyleSheet.get());
+
+            if(pSheet && pObj->getSdrModelFromSdrObject().GetStyleSheetPool())
+            {
+                ensureStyleSheetInStyleSheetPool(*pObj->getSdrModelFromSdrObject().GetStyleSheetPool(), *pSheet);
+                pObj->SetStyleSheet(pSheet, true);
+            }
+            else
+            {
+                OSL_ENSURE(false, "OOps, something went wrong in SdrUndoAttrObj (!)");
+            }
+        }
+
+        sdr::properties::ItemChangeBroadcaster aItemChange(*pObj);
+
+        // Since ClearItem sets back everything to normal
+        // it also sets fit-to-size text to non-fit-to-size text and
+        // switches on autogrowheight (the default). That may lead to
+        // losing the geometry size info for the object when it is
+        // laid out again from AdjustTextFrameWidthAndHeight(). This makes
+        // rescuing the size of the object necessary.
+        const tools::Rectangle aSnapRect = pObj->GetSnapRect();
+        // SdrObjCustomShape::NbcSetSnapRect needs logic instead of snap rect
+        const tools::Rectangle aLogicRect = pObj->GetLogicRect();
+
+        if(pUndoSet)
+        {
+            if(dynamic_cast<const SdrCaptionObj*>( pObj) !=  nullptr)
+            {
+                // do a more smooth item deletion here, else the text
+                // rect will be reformatted, especially when information regarding
+                // vertical text is changed. When clearing only set items it's
+                // slower, but safer regarding such information (it's not changed
+                // usually)
+                SfxWhichIter aIter(*pUndoSet);
+                sal_uInt16 nWhich(aIter.FirstWhich());
+
+                while(nWhich)
+                {
+                    if(SfxItemState::SET != pUndoSet->GetItemState(nWhich, false))
+                    {
+                        pObj->ClearMergedItem(nWhich);
+                    }
+
+                    nWhich = aIter.NextWhich();
+                }
+            }
+            else
+            {
+                pObj->ClearMergedItem();
+            }
+
+            pObj->SetMergedItemSet(*pUndoSet);
+        }
+
+        // Restore previous size here when it was changed.
+        if(aSnapRect != pObj->GetSnapRect())
+        {
+            if(dynamic_cast<const SdrObjCustomShape*>(pObj))
+                pObj->NbcSetSnapRect(aLogicRect);
+            else
+                pObj->NbcSetSnapRect(aSnapRect);
+        }
+
+        pObj->GetProperties().BroadcastItemChange(aItemChange);
+
+        if(pTextUndo)
+        {
+            pObj->SetOutlinerParaObject(std::make_unique<OutlinerParaObject>(*pTextUndo));
+        }
+    }
+
+    if(pUndoGroup)
+    {
+        pUndoGroup->Undo();
+    }
+}
+
+void SdrUndoAttrObj::Redo()
+{
+    E3DModifySceneSnapRectUpdater aUpdater(pObj);
+    bool bIs3DScene(dynamic_cast< E3dScene* >(pObj) !=  nullptr);
+
+    if(!pUndoGroup || bIs3DScene)
+    {
+        if(bStyleSheet)
+        {
+            mxUndoStyleSheet = pObj->GetStyleSheet();
+            SfxStyleSheet* pSheet = dynamic_cast< SfxStyleSheet* >(mxRedoStyleSheet.get());
+
+            if(pSheet && pObj->getSdrModelFromSdrObject().GetStyleSheetPool())
+            {
+                ensureStyleSheetInStyleSheetPool(*pObj->getSdrModelFromSdrObject().GetStyleSheetPool(), *pSheet);
+                pObj->SetStyleSheet(pSheet, true);
+            }
+            else
+            {
+                OSL_ENSURE(false, "OOps, something went wrong in SdrUndoAttrObj (!)");
+            }
+        }
+
+        sdr::properties::ItemChangeBroadcaster aItemChange(*pObj);
+
+        const tools::Rectangle aSnapRect = pObj->GetSnapRect();
+        const tools::Rectangle aLogicRect = pObj->GetLogicRect();
+
+        if(pRedoSet)
+        {
+            if(dynamic_cast<const SdrCaptionObj*>( pObj) !=  nullptr)
+            {
+                // do a more smooth item deletion here, else the text
+                // rect will be reformatted, especially when information regarding
+                // vertical text is changed. When clearing only set items it's
+                // slower, but safer regarding such information (it's not changed
+                // usually)
+                SfxWhichIter aIter(*pRedoSet);
+                sal_uInt16 nWhich(aIter.FirstWhich());
+
+                while(nWhich)
+                {
+                    if(SfxItemState::SET != pRedoSet->GetItemState(nWhich, false))
+                    {
+                        pObj->ClearMergedItem(nWhich);
+                    }
+
+                    nWhich = aIter.NextWhich();
+                }
+            }
+            else
+            {
+                pObj->ClearMergedItem();
+            }
+
+            pObj->SetMergedItemSet(*pRedoSet);
+        }
+
+        // Restore previous size here when it was changed.
+        if(aSnapRect != pObj->GetSnapRect())
+        {
+            if(dynamic_cast<const SdrObjCustomShape*>(pObj))
+                pObj->NbcSetSnapRect(aLogicRect);
+            else
+                pObj->NbcSetSnapRect(aSnapRect);
+        }
+
+        pObj->GetProperties().BroadcastItemChange(aItemChange);
+
+        // #i8508#
+        if(pTextRedo)
+        {
+            pObj->SetOutlinerParaObject(std::make_unique<OutlinerParaObject>(*pTextRedo));
+        }
+    }
+
+    if(pUndoGroup)
+    {
+        pUndoGroup->Redo();
+    }
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+OUString SdrUndoAttrObj::GetComment() const
+{
+    if(bStyleSheet)
+    {
+        return ImpGetDescriptionStr(STR_EditSetStylesheet);
+    }
+    else
+    {
+        return ImpGetDescriptionStr(STR_EditSetAttributes);
+    }
+}
+
+OUString SdrUndoAttrObj::GetSdrRepeatComment() const
+{
+    if(bStyleSheet)
+    {
+        return ImpGetDescriptionStr(STR_EditSetStylesheet, true);
+    }
+    else
+    {
+        return ImpGetDescriptionStr(STR_EditSetAttributes, true);
+    }
+}
+
+
+SdrUndoMoveObj::~SdrUndoMoveObj() {}
+
+void SdrUndoMoveObj::Undo()
+{
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    pObj->Move(Size(-aDistance.Width(),-aDistance.Height()));
+}
+
+void SdrUndoMoveObj::Redo()
+{
+    pObj->Move(Size(aDistance.Width(),aDistance.Height()));
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+OUString SdrUndoMoveObj::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_EditMove);
+}
+
+void SdrUndoMoveObj::SdrRepeat(SdrView& rView)
+{
+    rView.MoveMarkedObj(aDistance);
+}
+
+bool SdrUndoMoveObj::CanSdrRepeat(SdrView& rView) const
+{
+    return rView.AreObjectsMarked();
+}
+
+OUString SdrUndoMoveObj::GetSdrRepeatComment() const
+{
+    return ImpGetDescriptionStr(STR_EditMove,true);
+}
+
+
+SdrUndoGeoObj::SdrUndoGeoObj(SdrObject& rNewObj)
+     : SdrUndoObj(rNewObj)
+     , mbSkipChangeLayout(false)
+{
+    SdrObjList* pOL=rNewObj.GetSubList();
+    if (pOL!=nullptr && pOL->GetObjCount() && dynamic_cast<const E3dScene* >( &rNewObj) ==  nullptr)
+    {
+        // this is a group object!
+        // If this were 3D scene, we'd only add an Undo for the scene itself
+        // (which we do elsewhere).
+        pUndoGroup.reset(new SdrUndoGroup(pObj->getSdrModelFromSdrObject()));
+        const size_t nObjCount = pOL->GetObjCount();
+        for (size_t nObjNum = 0; nObjNum<nObjCount; ++nObjNum) {
+            pUndoGroup->AddAction(std::make_unique<SdrUndoGeoObj>(*pOL->GetObj(nObjNum)));
+        }
+    }
+    else
+    {
+        pUndoGeo.reset(pObj->GetGeoData());
+    }
+}
+
+SdrUndoGeoObj::~SdrUndoGeoObj()
+{
+    pUndoGeo.reset();
+    pRedoGeo.reset();
+    pUndoGroup.reset();
+}
+
+void SdrUndoGeoObj::Undo()
+{
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    if(pUndoGroup)
+    {
+        pUndoGroup->Undo();
+
+        // only repaint, no objectchange
+        pObj->ActionChanged();
+    }
+    else
+    {
+        pRedoGeo.reset(pObj->GetGeoData());
+
+        auto pTableObj = dynamic_cast<sdr::table::SdrTableObj*>(pObj);
+        if (pTableObj && mbSkipChangeLayout)
+            pTableObj->SetSkipChangeLayout(true);
+        pObj->SetGeoData(*pUndoGeo);
+        if (pTableObj && mbSkipChangeLayout)
+            pTableObj->SetSkipChangeLayout(false);
+    }
+}
+
+void SdrUndoGeoObj::Redo()
+{
+    if(pUndoGroup)
+    {
+        pUndoGroup->Redo();
+
+        // only repaint, no objectchange
+        pObj->ActionChanged();
+    }
+    else
+    {
+        pUndoGeo.reset(pObj->GetGeoData());
+        pObj->SetGeoData(*pRedoGeo);
+    }
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+OUString SdrUndoGeoObj::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_DragMethObjOwn);
+}
+
+
+SdrUndoObjList::SdrUndoObjList(SdrObject& rNewObj, bool bOrdNumDirect)
+    : SdrUndoObj(rNewObj)
+    , bOwner(false)
+{
+    pObjList=pObj->getParentSdrObjListFromSdrObject();
+    if (bOrdNumDirect)
+    {
+        nOrdNum=pObj->GetOrdNumDirect();
+    }
+    else
+    {
+        nOrdNum=pObj->GetOrdNum();
+    }
+}
+
+SdrUndoObjList::~SdrUndoObjList()
+{
+    SolarMutexGuard aGuard;
+
+    if (pObj!=nullptr && IsOwner())
+    {
+        // Attribute have to go back to the regular Pool
+        SetOwner(false);
+
+        // now delete
+        SdrObject::Free( pObj );
+    }
+}
+
+void SdrUndoObjList::SetOwner(bool bNew)
+{
+    bOwner = bNew;
+}
+
+
+void SdrUndoRemoveObj::Undo()
+{
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    DBG_ASSERT(!pObj->IsInserted(),"UndoRemoveObj: pObj has already been inserted.");
+    if (!pObj->IsInserted())
+    {
+        // #i11426#
+        // For UNDOs in Calc/Writer it is necessary to adapt the anchor
+        // position of the target object.
+        Point aOwnerAnchorPos(0, 0);
+
+        if (dynamic_cast< const SdrObjGroup* >(pObjList->getSdrObjectFromSdrObjList()) != nullptr)
+        {
+            aOwnerAnchorPos = pObjList->getSdrObjectFromSdrObjList()->GetAnchorPos();
+        }
+
+        E3DModifySceneSnapRectUpdater aUpdater(pObjList->getSdrObjectFromSdrObjList());
+        pObjList->InsertObject(pObj,nOrdNum);
+
+        // #i11426#
+        if(aOwnerAnchorPos.X() || aOwnerAnchorPos.Y())
+        {
+            pObj->NbcSetAnchorPos(aOwnerAnchorPos);
+        }
+    }
+}
+
+void SdrUndoRemoveObj::Redo()
+{
+    DBG_ASSERT(pObj->IsInserted(),"RedoRemoveObj: pObj is not inserted.");
+    if (pObj->IsInserted())
+    {
+        ImplUnmarkObject( pObj );
+        E3DModifySceneSnapRectUpdater aUpdater(pObj);
+        pObjList->RemoveObject(pObj->GetOrdNum());
+    }
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+SdrUndoRemoveObj::~SdrUndoRemoveObj()
+{
+}
+
+
+void SdrUndoInsertObj::Undo()
+{
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    DBG_ASSERT(pObj->IsInserted(),"UndoInsertObj: pObj is not inserted.");
+    if (pObj->IsInserted())
+    {
+        ImplUnmarkObject( pObj );
+
+        SdrObject* pChkObj= pObjList->RemoveObject(pObj->GetOrdNum());
+        DBG_ASSERT(pChkObj==pObj,"UndoInsertObj: RemoveObjNum!=pObj");
+    }
+}
+
+void SdrUndoInsertObj::Redo()
+{
+    DBG_ASSERT(!pObj->IsInserted(),"RedoInsertObj: pObj is already inserted");
+    if (!pObj->IsInserted())
+    {
+        // Restore anchor position of an object,
+        // which becomes a member of a group, because its cleared in method
+        // <InsertObject(..)>. Needed for correct Redo in Writer. (#i45952#)
+        Point aAnchorPos( 0, 0 );
+
+        if (dynamic_cast<const SdrObjGroup*>(pObjList->getSdrObjectFromSdrObjList()) != nullptr)
+        {
+            aAnchorPos = pObj->GetAnchorPos();
+        }
+
+        pObjList->InsertObject(pObj,nOrdNum);
+
+        // Arcs lose position when grouped (#i45952#)
+        if ( aAnchorPos.X() || aAnchorPos.Y() )
+        {
+            pObj->NbcSetAnchorPos( aAnchorPos );
+        }
+    }
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+SdrUndoDelObj::SdrUndoDelObj(SdrObject& rNewObj, bool bOrdNumDirect)
+:   SdrUndoRemoveObj(rNewObj,bOrdNumDirect)
+{
+    SetOwner(true);
+}
+
+void SdrUndoDelObj::Undo()
+{
+    SdrUndoRemoveObj::Undo();
+    DBG_ASSERT(IsOwner(),"UndoDeleteObj: pObj does not belong to UndoAction");
+    SetOwner(false);
+}
+
+void SdrUndoDelObj::Redo()
+{
+    SdrUndoRemoveObj::Redo();
+    DBG_ASSERT(!IsOwner(),"RedoDeleteObj: pObj already belongs to UndoAction");
+    SetOwner(true);
+}
+
+OUString SdrUndoDelObj::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_EditDelete);
+}
+
+void SdrUndoDelObj::SdrRepeat(SdrView& rView)
+{
+    rView.DeleteMarked();
+}
+
+bool SdrUndoDelObj::CanSdrRepeat(SdrView& rView) const
+{
+    return rView.AreObjectsMarked();
+}
+
+OUString SdrUndoDelObj::GetSdrRepeatComment() const
+{
+    return ImpGetDescriptionStr(STR_EditDelete,true);
+}
+
+
+void SdrUndoNewObj::Undo()
+{
+    SdrUndoInsertObj::Undo();
+    DBG_ASSERT(!IsOwner(),"RedoNewObj: pObj already belongs to UndoAction");
+    SetOwner(true);
+}
+
+void SdrUndoNewObj::Redo()
+{
+    SdrUndoInsertObj::Redo();
+    DBG_ASSERT(IsOwner(),"RedoNewObj: pObj does not belong to UndoAction");
+    SetOwner(false);
+}
+
+OUString SdrUndoNewObj::GetComment( const SdrObject& _rForObject )
+{
+    return GetDescriptionStringForObject( _rForObject, STR_UndoInsertObj );
+}
+
+OUString SdrUndoNewObj::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoInsertObj);
+}
+
+SdrUndoReplaceObj::SdrUndoReplaceObj(SdrObject& rOldObj1, SdrObject& rNewObj1)
+    : SdrUndoObj(rOldObj1)
+    , bOldOwner(false)
+    , bNewOwner(false)
+    , pNewObj(&rNewObj1)
+{
+    SetOldOwner(true);
+    pObjList=pObj->getParentSdrObjListFromSdrObject();
+}
+
+SdrUndoReplaceObj::~SdrUndoReplaceObj()
+{
+    if (pObj!=nullptr && IsOldOwner())
+    {
+        // Attribute have to go back into the Pool
+        SetOldOwner(false);
+
+        // now delete
+        SdrObject::Free( pObj );
+    }
+    if (pNewObj!=nullptr && IsNewOwner())
+    {
+        // Attribute have to go back into the Pool
+        SetNewOwner(false);
+
+        // now delete
+        SdrObject::Free( pNewObj );
+    }
+}
+
+void SdrUndoReplaceObj::Undo()
+{
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    if (IsOldOwner() && !IsNewOwner())
+    {
+        DBG_ASSERT(!pObj->IsInserted(),"SdrUndoReplaceObj::Undo(): Old object is already inserted!");
+        DBG_ASSERT(pNewObj->IsInserted(),"SdrUndoReplaceObj::Undo(): New object is not inserted!");
+        SetOldOwner(false);
+        SetNewOwner(true);
+
+        ImplUnmarkObject( pNewObj );
+        pObjList->ReplaceObject(pObj,pNewObj->GetOrdNum());
+    }
+    else
+    {
+        OSL_FAIL("SdrUndoReplaceObj::Undo(): Wrong IsMine flags. Did you call Undo twice?");
+    }
+}
+
+void SdrUndoReplaceObj::Redo()
+{
+    if (!IsOldOwner() && IsNewOwner())
+    {
+        DBG_ASSERT(!pNewObj->IsInserted(),"SdrUndoReplaceObj::Redo(): New object is already inserted!!");
+        DBG_ASSERT(pObj->IsInserted(),"SdrUndoReplaceObj::Redo(): Old object is not inserted!!");
+        SetOldOwner(true);
+        SetNewOwner(false);
+
+        ImplUnmarkObject( pObj );
+        pObjList->ReplaceObject(pNewObj,pObj->GetOrdNum());
+
+    }
+    else
+    {
+        OSL_FAIL("SdrUndoReplaceObj::Redo(): Wrong IsMine flags. Did you call Redo twice?");
+    }
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+void SdrUndoReplaceObj::SetNewOwner(bool bNew)
+{
+    bNewOwner = bNew;
+}
+
+void SdrUndoReplaceObj::SetOldOwner(bool bNew)
+{
+    bOldOwner = bNew;
+}
+
+
+OUString SdrUndoCopyObj::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoCopyObj);
+}
+
+
+// #i11702#
+
+SdrUndoObjectLayerChange::SdrUndoObjectLayerChange(SdrObject& rObj, SdrLayerID aOldLayer, SdrLayerID aNewLayer)
+  : SdrUndoObj(rObj)
+  , maOldLayer(aOldLayer)
+  , maNewLayer(aNewLayer)
+{
+}
+
+void SdrUndoObjectLayerChange::Undo()
+{
+    ImpShowPageOfThisObject();
+    pObj->SetLayer(maOldLayer);
+}
+
+void SdrUndoObjectLayerChange::Redo()
+{
+    pObj->SetLayer(maNewLayer);
+    ImpShowPageOfThisObject();
+}
+
+
+SdrUndoObjOrdNum::SdrUndoObjOrdNum(SdrObject& rNewObj, sal_uInt32 nOldOrdNum1, sal_uInt32 nNewOrdNum1)
+    : SdrUndoObj(rNewObj)
+    , nOldOrdNum(nOldOrdNum1)
+    , nNewOrdNum(nNewOrdNum1)
+{
+}
+
+void SdrUndoObjOrdNum::Undo()
+{
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+    if (pOL==nullptr)
+    {
+        OSL_FAIL("UndoObjOrdNum: pObj does not have an ObjList.");
+        return;
+    }
+    pOL->SetObjectOrdNum(nNewOrdNum,nOldOrdNum);
+}
+
+void SdrUndoObjOrdNum::Redo()
+{
+    SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject();
+    if (pOL==nullptr)
+    {
+        OSL_FAIL("RedoObjOrdNum: pObj does not have an ObjList.");
+        return;
+    }
+    pOL->SetObjectOrdNum(nOldOrdNum,nNewOrdNum);
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+OUString SdrUndoObjOrdNum::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoObjOrdNum);
+}
+
+
+SdrUndoObjSetText::SdrUndoObjSetText(SdrObject& rNewObj, sal_Int32 nText)
+    : SdrUndoObj(rNewObj)
+    , bNewTextAvailable(false)
+    , bEmptyPresObj(false)
+    , mnText(nText)
+{
+    SdrText* pText = static_cast< SdrTextObj*>( &rNewObj )->getText(mnText);
+    if( pText && pText->GetOutlinerParaObject() )
+        pOldText.reset( new OutlinerParaObject(*pText->GetOutlinerParaObject()) );
+
+    bEmptyPresObj = rNewObj.IsEmptyPresObj();
+}
+
+SdrUndoObjSetText::~SdrUndoObjSetText()
+{
+    pOldText.reset();
+    pNewText.reset();
+}
+
+void SdrUndoObjSetText::AfterSetText()
+{
+    if (!bNewTextAvailable)
+    {
+        SdrText* pText = static_cast< SdrTextObj*>( pObj )->getText(mnText);
+        if( pText && pText->GetOutlinerParaObject() )
+            pNewText.reset( new OutlinerParaObject(*pText->GetOutlinerParaObject()) );
+        bNewTextAvailable=true;
+    }
+}
+
+void SdrUndoObjSetText::Undo()
+{
+    // only works with SdrTextObj
+    SdrTextObj* pTarget = dynamic_cast< SdrTextObj* >(pObj);
+
+    if(!pTarget)
+    {
+        OSL_ENSURE(false, "SdrUndoObjSetText::Undo with SdrObject not based on SdrTextObj (!)");
+        return;
+    }
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+
+    // save old text for Redo
+    if(!bNewTextAvailable)
+    {
+        AfterSetText();
+    }
+
+    SdrText* pText = pTarget->getText(mnText);
+    if (pText)
+    {
+        // copy text for Undo, because the original now belongs to SetOutlinerParaObject()
+        std::unique_ptr<OutlinerParaObject> pText1( pOldText ? new OutlinerParaObject(*pOldText) : nullptr );
+        pTarget->NbcSetOutlinerParaObjectForText(std::move(pText1), pText);
+    }
+
+    pTarget->SetEmptyPresObj(bEmptyPresObj);
+    pTarget->ActionChanged();
+
+    // #i124389# if it's a table, also need to relayout TextFrame
+    if(dynamic_cast< sdr::table::SdrTableObj* >(pTarget) !=  nullptr)
+    {
+        pTarget->NbcAdjustTextFrameWidthAndHeight();
+    }
+
+    // #i122410# SetOutlinerParaObject at SdrText does not trigger a
+    // BroadcastObjectChange, but it is needed to make evtl. SlideSorters
+    // update their preview.
+    pTarget->BroadcastObjectChange();
+}
+
+void SdrUndoObjSetText::Redo()
+{
+    // only works with SdrTextObj
+    SdrTextObj* pTarget = dynamic_cast< SdrTextObj* >(pObj);
+
+    if(!pTarget)
+    {
+        OSL_ENSURE(false, "SdrUndoObjSetText::Redo with SdrObject not based on SdrTextObj (!)");
+        return;
+    }
+
+    SdrText* pText = pTarget->getText(mnText);
+    if (pText)
+    {
+        // copy text for Undo, because the original now belongs to SetOutlinerParaObject()
+        std::unique_ptr<OutlinerParaObject> pText1( pNewText ? new OutlinerParaObject(*pNewText) : nullptr );
+        pTarget->NbcSetOutlinerParaObjectForText( std::move(pText1), pText );
+    }
+
+    pTarget->ActionChanged();
+
+    // #i124389# if it's a table, also need to relayout TextFrame
+    if(dynamic_cast< sdr::table::SdrTableObj* >(pTarget) !=  nullptr)
+    {
+        pTarget->NbcAdjustTextFrameWidthAndHeight();
+    }
+
+    // #i122410# NbcSetOutlinerParaObjectForText at SdrTextObj does not trigger a
+    // BroadcastObjectChange, but it is needed to make evtl. SlideSorters
+    // update their preview.
+    pTarget->BroadcastObjectChange();
+
+    // Trigger PageChangeCall
+    ImpShowPageOfThisObject();
+}
+
+OUString SdrUndoObjSetText::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoObjSetText);
+}
+
+OUString SdrUndoObjSetText::GetSdrRepeatComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoObjSetText);
+}
+
+void SdrUndoObjSetText::SdrRepeat(SdrView& rView)
+{
+    if (bNewTextAvailable && rView.AreObjectsMarked())
+    {
+        const SdrMarkList& rML=rView.GetMarkedObjectList();
+
+        const bool bUndo = rView.IsUndoEnabled();
+        if( bUndo )
+        {
+            OUString aStr = ImpGetDescriptionStr(STR_UndoObjSetText);
+            rView.BegUndo(aStr);
+        }
+
+        const size_t nCount=rML.GetMarkCount();
+        for (size_t nm=0; nm<nCount; ++nm)
+        {
+            SdrObject* pObj2=rML.GetMark(nm)->GetMarkedSdrObj();
+            SdrTextObj* pTextObj=dynamic_cast<SdrTextObj*>( pObj2 );
+            if (pTextObj!=nullptr)
+            {
+                if( bUndo )
+                    rView.AddUndo(std::make_unique<SdrUndoObjSetText>(*pTextObj,0));
+
+                std::unique_ptr<OutlinerParaObject> pText1;
+                if (pNewText)
+                    pText1.reset(new OutlinerParaObject(*pNewText));
+                pTextObj->SetOutlinerParaObject(std::move(pText1));
+            }
+        }
+
+        if( bUndo )
+            rView.EndUndo();
+    }
+}
+
+bool SdrUndoObjSetText::CanSdrRepeat(SdrView& rView) const
+{
+    bool bOk = false;
+    if (bNewTextAvailable && rView.AreObjectsMarked()) {
+        bOk=true;
+    }
+    return bOk;
+}
+
+// Undo/Redo for setting object's name (#i73249#)
+SdrUndoObjStrAttr::SdrUndoObjStrAttr( SdrObject& rNewObj,
+                                      const ObjStrAttrType eObjStrAttr,
+                                      const OUString& sOldStr,
+                                      const OUString& sNewStr)
+    : SdrUndoObj( rNewObj )
+    , meObjStrAttr( eObjStrAttr )
+    , msOldStr( sOldStr )
+    , msNewStr( sNewStr )
+{
+}
+
+void SdrUndoObjStrAttr::Undo()
+{
+    ImpShowPageOfThisObject();
+
+    switch ( meObjStrAttr )
+    {
+    case ObjStrAttrType::Name:
+        pObj->SetName( msOldStr );
+        break;
+    case ObjStrAttrType::Title:
+        pObj->SetTitle( msOldStr );
+        break;
+    case ObjStrAttrType::Description:
+        pObj->SetDescription( msOldStr );
+        break;
+    }
+}
+
+void SdrUndoObjStrAttr::Redo()
+{
+    switch ( meObjStrAttr )
+    {
+    case ObjStrAttrType::Name:
+        pObj->SetName( msNewStr );
+        break;
+    case ObjStrAttrType::Title:
+        pObj->SetTitle( msNewStr );
+        break;
+    case ObjStrAttrType::Description:
+        pObj->SetDescription( msNewStr );
+        break;
+    }
+
+    ImpShowPageOfThisObject();
+}
+
+OUString SdrUndoObjStrAttr::GetComment() const
+{
+    OUString aStr;
+    switch ( meObjStrAttr )
+    {
+    case ObjStrAttrType::Name:
+        aStr = ImpGetDescriptionStr( STR_UndoObjName) +
+                " '" + msNewStr + "'";
+        break;
+    case ObjStrAttrType::Title:
+        aStr = ImpGetDescriptionStr( STR_UndoObjTitle );
+        break;
+    case ObjStrAttrType::Description:
+        aStr = ImpGetDescriptionStr( STR_UndoObjDescription );
+        break;
+    }
+
+    return aStr;
+}
+
+
+SdrUndoLayer::SdrUndoLayer(sal_uInt16 nLayerNum, SdrLayerAdmin& rNewLayerAdmin, SdrModel& rNewModel)
+    : SdrUndoAction(rNewModel)
+    , pLayer(rNewLayerAdmin.GetLayer(nLayerNum))
+    , pLayerAdmin(&rNewLayerAdmin)
+    , nNum(nLayerNum)
+    , bItsMine(false)
+{
+}
+
+SdrUndoLayer::~SdrUndoLayer()
+{
+    if (bItsMine)
+    {
+        delete pLayer;
+    }
+}
+
+
+void SdrUndoNewLayer::Undo()
+{
+    DBG_ASSERT(!bItsMine,"SdrUndoNewLayer::Undo(): Layer already belongs to UndoAction.");
+    bItsMine=true;
+    SdrLayer* pCmpLayer= pLayerAdmin->RemoveLayer(nNum).release();
+    DBG_ASSERT(pCmpLayer==pLayer,"SdrUndoNewLayer::Undo(): Removed layer is != pLayer.");
+}
+
+void SdrUndoNewLayer::Redo()
+{
+    DBG_ASSERT(bItsMine,"SdrUndoNewLayer::Undo(): Layer does not belong to UndoAction.");
+    bItsMine=false;
+    pLayerAdmin->InsertLayer(std::unique_ptr<SdrLayer>(pLayer),nNum);
+}
+
+OUString SdrUndoNewLayer::GetComment() const
+{
+    return SvxResId(STR_UndoNewLayer);
+}
+
+
+void SdrUndoDelLayer::Undo()
+{
+    DBG_ASSERT(bItsMine,"SdrUndoDelLayer::Undo(): Layer does not belong to UndoAction.");
+    bItsMine=false;
+    pLayerAdmin->InsertLayer(std::unique_ptr<SdrLayer>(pLayer),nNum);
+}
+
+void SdrUndoDelLayer::Redo()
+{
+    DBG_ASSERT(!bItsMine,"SdrUndoDelLayer::Undo(): Layer already belongs to UndoAction.");
+    bItsMine=true;
+    SdrLayer* pCmpLayer= pLayerAdmin->RemoveLayer(nNum).release();
+    DBG_ASSERT(pCmpLayer==pLayer,"SdrUndoDelLayer::Redo(): Removed layer is != pLayer.");
+}
+
+OUString SdrUndoDelLayer::GetComment() const
+{
+    return SvxResId(STR_UndoDelLayer);
+}
+
+
+SdrUndoPage::SdrUndoPage(SdrPage& rNewPg)
+:   SdrUndoAction(rNewPg.getSdrModelFromSdrPage())
+    ,mrPage(rNewPg)
+{
+}
+
+void SdrUndoPage::ImpInsertPage(sal_uInt16 nNum)
+{
+    DBG_ASSERT(!mrPage.IsInserted(),"SdrUndoPage::ImpInsertPage(): mrPage is already inserted.");
+    if (!mrPage.IsInserted())
+    {
+        if (mrPage.IsMasterPage())
+        {
+            rMod.InsertMasterPage(&mrPage,nNum);
+        }
+        else
+        {
+            rMod.InsertPage(&mrPage,nNum);
+        }
+    }
+}
+
+void SdrUndoPage::ImpRemovePage(sal_uInt16 nNum)
+{
+    DBG_ASSERT(mrPage.IsInserted(),"SdrUndoPage::ImpRemovePage(): mrPage is not inserted.");
+    if (mrPage.IsInserted())
+    {
+        SdrPage* pChkPg=nullptr;
+        if (mrPage.IsMasterPage())
+        {
+            pChkPg=rMod.RemoveMasterPage(nNum);
+        }
+        else
+        {
+            pChkPg=rMod.RemovePage(nNum);
+        }
+        DBG_ASSERT(pChkPg==&mrPage,"SdrUndoPage::ImpRemovePage(): RemovePage!=&mrPage");
+    }
+}
+
+void SdrUndoPage::ImpMovePage(sal_uInt16 nOldNum, sal_uInt16 nNewNum)
+{
+    DBG_ASSERT(mrPage.IsInserted(),"SdrUndoPage::ImpMovePage(): mrPage is not inserted.");
+    if (mrPage.IsInserted())
+    {
+        if (mrPage.IsMasterPage())
+        {
+            rMod.MoveMasterPage(nOldNum,nNewNum);
+        }
+        else
+        {
+            rMod.MovePage(nOldNum,nNewNum);
+        }
+    }
+}
+
+OUString SdrUndoPage::ImpGetDescriptionStr(const char* pStrCacheID)
+{
+    return SvxResId(pStrCacheID);
+}
+
+
+SdrUndoPageList::SdrUndoPageList(SdrPage& rNewPg)
+    : SdrUndoPage(rNewPg)
+    , bItsMine(false)
+{
+    nPageNum=rNewPg.GetPageNum();
+}
+
+SdrUndoPageList::~SdrUndoPageList()
+{
+    if(bItsMine)
+    {
+        delete &mrPage;
+    }
+}
+
+
+SdrUndoDelPage::SdrUndoDelPage(SdrPage& rNewPg)
+    : SdrUndoPageList(rNewPg)
+    , mbHasFillBitmap(false)
+{
+    bItsMine = true;
+
+    // keep fill bitmap separately to remove it from pool if not used elsewhere
+    if (mrPage.IsMasterPage())
+    {
+        SfxStyleSheet* const pStyleSheet = mrPage.getSdrPageProperties().GetStyleSheet();
+        if (pStyleSheet)
+            queryFillBitmap(pStyleSheet->GetItemSet());
+    }
+    else
+    {
+        queryFillBitmap(mrPage.getSdrPageProperties().GetItemSet());
+    }
+    if (bool(mpFillBitmapItem))
+        clearFillBitmap();
+
+    // now remember the master page relationships
+    if(mrPage.IsMasterPage())
+    {
+        sal_uInt16 nPageCnt(rMod.GetPageCount());
+
+        for(sal_uInt16 nPageNum2(0); nPageNum2 < nPageCnt; nPageNum2++)
+        {
+            SdrPage* pDrawPage = rMod.GetPage(nPageNum2);
+
+            if(pDrawPage->TRG_HasMasterPage())
+            {
+                SdrPage& rMasterPage = pDrawPage->TRG_GetMasterPage();
+
+                if(&mrPage == &rMasterPage)
+                {
+                    if(!pUndoGroup)
+                    {
+                        pUndoGroup.reset( new SdrUndoGroup(rMod) );
+                    }
+
+                    pUndoGroup->AddAction(rMod.GetSdrUndoFactory().CreateUndoPageRemoveMasterPage(*pDrawPage));
+                }
+            }
+        }
+    }
+}
+
+SdrUndoDelPage::~SdrUndoDelPage()
+{
+}
+
+void SdrUndoDelPage::Undo()
+{
+    if (bool(mpFillBitmapItem))
+        restoreFillBitmap();
+    ImpInsertPage(nPageNum);
+    if (pUndoGroup!=nullptr)
+    {
+        // recover master page relationships
+        pUndoGroup->Undo();
+    }
+    DBG_ASSERT(bItsMine,"UndoDeletePage: mrPage does not belong to UndoAction.");
+    bItsMine=false;
+}
+
+void SdrUndoDelPage::Redo()
+{
+    ImpRemovePage(nPageNum);
+    if (bool(mpFillBitmapItem))
+        clearFillBitmap();
+    // master page relations are dissolved automatically
+    DBG_ASSERT(!bItsMine,"RedoDeletePage: mrPage already belongs to UndoAction.");
+    bItsMine=true;
+}
+
+OUString SdrUndoDelPage::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoDelPage);
+}
+
+OUString SdrUndoDelPage::GetSdrRepeatComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoDelPage);
+}
+
+void SdrUndoDelPage::SdrRepeat(SdrView& /*rView*/)
+{
+}
+
+bool SdrUndoDelPage::CanSdrRepeat(SdrView& /*rView*/) const
+{
+    return false;
+}
+
+void SdrUndoDelPage::queryFillBitmap(const SfxItemSet& rItemSet)
+{
+    const SfxPoolItem *pItem = nullptr;
+    if (rItemSet.GetItemState(XATTR_FILLBITMAP, false, &pItem) == SfxItemState::SET)
+        mpFillBitmapItem.reset(pItem->Clone());
+    if (rItemSet.GetItemState(XATTR_FILLSTYLE, false, &pItem) == SfxItemState::SET)
+        mbHasFillBitmap = static_cast<const XFillStyleItem*>(pItem)->GetValue() == css::drawing::FillStyle_BITMAP;
+}
+
+void SdrUndoDelPage::clearFillBitmap()
+{
+    if (mrPage.IsMasterPage())
+    {
+        SfxStyleSheet* const pStyleSheet = mrPage.getSdrPageProperties().GetStyleSheet();
+        assert(bool(pStyleSheet)); // who took away my stylesheet?
+        if (pStyleSheet->GetListenerCount() == 1)
+        {
+            SfxItemSet& rItemSet = pStyleSheet->GetItemSet();
+            rItemSet.ClearItem(XATTR_FILLBITMAP);
+            if (mbHasFillBitmap)
+                rItemSet.ClearItem(XATTR_FILLSTYLE);
+        }
+    }
+    else
+    {
+        SdrPageProperties &rPageProps = mrPage.getSdrPageProperties();
+        rPageProps.ClearItem(XATTR_FILLBITMAP);
+        if (mbHasFillBitmap)
+            rPageProps.ClearItem(XATTR_FILLSTYLE);
+    }
+}
+
+void SdrUndoDelPage::restoreFillBitmap()
+{
+    if (mrPage.IsMasterPage())
+    {
+        SfxStyleSheet* const pStyleSheet = mrPage.getSdrPageProperties().GetStyleSheet();
+        assert(bool(pStyleSheet)); // who took away my stylesheet?
+        if (pStyleSheet->GetListenerCount() == 1)
+        {
+            SfxItemSet& rItemSet = pStyleSheet->GetItemSet();
+            rItemSet.Put(*mpFillBitmapItem);
+            if (mbHasFillBitmap)
+                rItemSet.Put(XFillStyleItem(css::drawing::FillStyle_BITMAP));
+        }
+    }
+    else
+    {
+        SdrPageProperties &rPageProps = mrPage.getSdrPageProperties();
+        rPageProps.PutItem(*mpFillBitmapItem);
+        if (mbHasFillBitmap)
+            rPageProps.PutItem(XFillStyleItem(css::drawing::FillStyle_BITMAP));
+    }
+}
+
+
+void SdrUndoNewPage::Undo()
+{
+    ImpRemovePage(nPageNum);
+    DBG_ASSERT(!bItsMine,"UndoNewPage: mrPage already belongs to UndoAction.");
+    bItsMine=true;
+}
+
+void SdrUndoNewPage::Redo()
+{
+    ImpInsertPage(nPageNum);
+    DBG_ASSERT(bItsMine,"RedoNewPage: mrPage does not belong to UndoAction.");
+    bItsMine=false;
+}
+
+OUString SdrUndoNewPage::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoNewPage);
+}
+
+
+OUString SdrUndoCopyPage::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoCopPage);
+}
+
+OUString SdrUndoCopyPage::GetSdrRepeatComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoCopPage);
+}
+
+void SdrUndoCopyPage::SdrRepeat(SdrView& /*rView*/)
+{
+
+}
+
+bool SdrUndoCopyPage::CanSdrRepeat(SdrView& /*rView*/) const
+{
+    return false;
+}
+
+
+void SdrUndoSetPageNum::Undo()
+{
+    ImpMovePage(nNewPageNum,nOldPageNum);
+}
+
+void SdrUndoSetPageNum::Redo()
+{
+    ImpMovePage(nOldPageNum,nNewPageNum);
+}
+
+OUString SdrUndoSetPageNum::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoMovPage);
+}
+
+SdrUndoPageMasterPage::SdrUndoPageMasterPage(SdrPage& rChangedPage)
+    : SdrUndoPage(rChangedPage)
+    , mbOldHadMasterPage(mrPage.TRG_HasMasterPage())
+    , maOldMasterPageNumber(0)
+{
+    // get current state from page
+    if(mbOldHadMasterPage)
+    {
+        maOldSet = mrPage.TRG_GetMasterPageVisibleLayers();
+        maOldMasterPageNumber = mrPage.TRG_GetMasterPage().GetPageNum();
+    }
+}
+
+SdrUndoPageMasterPage::~SdrUndoPageMasterPage()
+{
+}
+
+SdrUndoPageRemoveMasterPage::SdrUndoPageRemoveMasterPage(SdrPage& rChangedPage)
+:   SdrUndoPageMasterPage(rChangedPage)
+{
+}
+
+void SdrUndoPageRemoveMasterPage::Undo()
+{
+    if(mbOldHadMasterPage)
+    {
+        mrPage.TRG_SetMasterPage(*mrPage.getSdrModelFromSdrPage().GetMasterPage(maOldMasterPageNumber));
+        mrPage.TRG_SetMasterPageVisibleLayers(maOldSet);
+    }
+}
+
+void SdrUndoPageRemoveMasterPage::Redo()
+{
+    mrPage.TRG_ClearMasterPage();
+}
+
+OUString SdrUndoPageRemoveMasterPage::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoDelPageMasterDscr);
+}
+
+SdrUndoPageChangeMasterPage::SdrUndoPageChangeMasterPage(SdrPage& rChangedPage)
+    : SdrUndoPageMasterPage(rChangedPage)
+    , mbNewHadMasterPage(false)
+    , maNewMasterPageNumber(0)
+{
+}
+
+void SdrUndoPageChangeMasterPage::Undo()
+{
+    // remember values from new page
+    if(mrPage.TRG_HasMasterPage())
+    {
+        mbNewHadMasterPage = true;
+        maNewSet = mrPage.TRG_GetMasterPageVisibleLayers();
+        maNewMasterPageNumber = mrPage.TRG_GetMasterPage().GetPageNum();
+    }
+
+    // restore old values
+    if(mbOldHadMasterPage)
+    {
+        mrPage.TRG_ClearMasterPage();
+        mrPage.TRG_SetMasterPage(*mrPage.getSdrModelFromSdrPage().GetMasterPage(maOldMasterPageNumber));
+        mrPage.TRG_SetMasterPageVisibleLayers(maOldSet);
+    }
+}
+
+void SdrUndoPageChangeMasterPage::Redo()
+{
+    // restore new values
+    if(mbNewHadMasterPage)
+    {
+        mrPage.TRG_ClearMasterPage();
+        mrPage.TRG_SetMasterPage(*mrPage.getSdrModelFromSdrPage().GetMasterPage(maNewMasterPageNumber));
+        mrPage.TRG_SetMasterPageVisibleLayers(maNewSet);
+    }
+}
+
+OUString SdrUndoPageChangeMasterPage::GetComment() const
+{
+    return ImpGetDescriptionStr(STR_UndoChgPageMasterDscr);
+}
+
+
+SdrUndoFactory::~SdrUndoFactory(){}
+
+// shapes
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoMoveObject( SdrObject& rObject, const Size& rDist )
+{
+    return std::make_unique<SdrUndoMoveObj>( rObject, rDist );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoGeoObject( SdrObject& rObject )
+{
+    return std::make_unique<SdrUndoGeoObj>( rObject );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoAttrObject( SdrObject& rObject, bool bStyleSheet1, bool bSaveText )
+{
+    return std::make_unique<SdrUndoAttrObj>( rObject, bStyleSheet1, bSaveText );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoRemoveObject(SdrObject& rObject)
+{
+    return std::make_unique<SdrUndoRemoveObj>(rObject);
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoInsertObject( SdrObject& rObject, bool bOrdNumDirect )
+{
+    return std::make_unique<SdrUndoInsertObj>( rObject, bOrdNumDirect );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoDeleteObject( SdrObject& rObject, bool bOrdNumDirect )
+{
+    return std::make_unique<SdrUndoDelObj>( rObject, bOrdNumDirect );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoNewObject( SdrObject& rObject, bool bOrdNumDirect )
+{
+    return std::make_unique<SdrUndoNewObj>( rObject, bOrdNumDirect );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoCopyObject( SdrObject& rObject, bool bOrdNumDirect )
+{
+    return std::make_unique<SdrUndoCopyObj>( rObject, bOrdNumDirect );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoObjectOrdNum( SdrObject& rObject, sal_uInt32 nOldOrdNum1, sal_uInt32 nNewOrdNum1)
+{
+    return std::make_unique<SdrUndoObjOrdNum>( rObject, nOldOrdNum1, nNewOrdNum1 );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoReplaceObject( SdrObject& rOldObject, SdrObject& rNewObject )
+{
+    return std::make_unique<SdrUndoReplaceObj>( rOldObject, rNewObject );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoObjectLayerChange( SdrObject& rObject, SdrLayerID aOldLayer, SdrLayerID aNewLayer )
+{
+    return std::make_unique<SdrUndoObjectLayerChange>( rObject, aOldLayer, aNewLayer );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoObjectSetText( SdrObject& rNewObj, sal_Int32 nText )
+{
+    return std::make_unique<SdrUndoObjSetText>( rNewObj, nText );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoObjectStrAttr( SdrObject& rObject,
+                                                        SdrUndoObjStrAttr::ObjStrAttrType eObjStrAttrType,
+                                                        const OUString& sOldStr,
+                                                        const OUString& sNewStr )
+{
+    return std::make_unique<SdrUndoObjStrAttr>( rObject, eObjStrAttrType, sOldStr, sNewStr );
+}
+
+
+// layer
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoNewLayer(sal_uInt16 nLayerNum, SdrLayerAdmin& rNewLayerAdmin, SdrModel& rNewModel)
+{
+    return std::make_unique<SdrUndoNewLayer>( nLayerNum, rNewLayerAdmin, rNewModel );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoDeleteLayer(sal_uInt16 nLayerNum, SdrLayerAdmin& rNewLayerAdmin, SdrModel& rNewModel)
+{
+    return std::make_unique<SdrUndoDelLayer>( nLayerNum, rNewLayerAdmin, rNewModel );
+}
+
+// page
+std::unique_ptr<SdrUndoAction>  SdrUndoFactory::CreateUndoDeletePage(SdrPage& rPage)
+{
+    return std::make_unique<SdrUndoDelPage>(rPage);
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoNewPage(SdrPage& rPage)
+{
+    return std::make_unique<SdrUndoNewPage>( rPage );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoCopyPage(SdrPage& rPage)
+{
+    return std::make_unique<SdrUndoCopyPage>( rPage );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoSetPageNum(SdrPage& rNewPg, sal_uInt16 nOldPageNum1, sal_uInt16 nNewPageNum1)
+{
+    return std::make_unique<SdrUndoSetPageNum>( rNewPg, nOldPageNum1, nNewPageNum1 );
+}
+    // master page
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoPageRemoveMasterPage(SdrPage& rChangedPage)
+{
+    return std::make_unique<SdrUndoPageRemoveMasterPage>( rChangedPage );
+}
+
+std::unique_ptr<SdrUndoAction> SdrUndoFactory::CreateUndoPageChangeMasterPage(SdrPage& rChangedPage)
+{
+    return std::make_unique<SdrUndoPageChangeMasterPage>(rChangedPage);
+}
+
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdview.cxx b/svx/source/svdraw/svdview.cxx
new file mode 100644
index 000000000..33cf89ab8
--- /dev/null
+++ b/svx/source/svdraw/svdview.cxx
@@ -0,0 +1,1460 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <editeng/outlobj.hxx>
+
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdmrkv.hxx>
+#include <svx/svdedxv.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdomedia.hxx>
+#include <svx/svdetc.hxx>
+
+#include <svx/svdoutl.hxx>
+#include <svx/svdview.hxx>
+#include <editeng/flditem.hxx>
+#include <svx/obj3d.hxx>
+#include <svx/svddrgmt.hxx>
+#include <svx/svdotable.hxx>
+#include <tools/debug.hxx>
+#include <svx/sdr/overlay/overlaypolypolygon.hxx>
+#include <svx/sdr/overlay/overlaymanager.hxx>
+#include <svx/sdrpaintwindow.hxx>
+#include <svx/sdrpagewindow.hxx>
+#include <svx/sdrhittesthelper.hxx>
+#include <drawinglayer/primitive2d/texthierarchyprimitive2d.hxx>
+#include <svx/sdr/contact/objectcontactofpageview.hxx>
+#include <sal/log.hxx>
+#include <vcl/ptrstyle.hxx>
+
+
+SdrViewEvent::SdrViewEvent()
+:     pHdl(nullptr),
+      pObj(nullptr),
+      pRootObj(nullptr),
+      pPV(nullptr),
+      pURLField(nullptr),
+      eHit(SdrHitKind::NONE),
+      eEvent(SdrEventKind::NONE),
+      nMouseClicks(0),
+      nMouseMode(MouseEventModifiers::NONE),
+      nMouseCode(0),
+      nHlplIdx(0),
+      nGlueId(0),
+      bMouseDown(false),
+      bMouseUp(false),
+      bIsAction(false),
+      bIsTextEdit(false),
+      bAddMark(false),
+      bUnmark(false),
+      bPrevNextMark(false),
+      bMarkPrev(false)
+{
+}
+
+SdrViewEvent::~SdrViewEvent()
+{
+}
+
+
+// helper class for all D&D overlays
+
+void SdrDropMarkerOverlay::ImplCreateOverlays(
+    const SdrView& rView,
+    const basegfx::B2DPolyPolygon& rLinePolyPolygon)
+{
+    for(sal_uInt32 a(0); a < rView.PaintWindowCount(); a++)
+    {
+        SdrPaintWindow* pCandidate = rView.GetPaintWindow(a);
+        const rtl::Reference< sdr::overlay::OverlayManager >& xTargetOverlay = pCandidate->GetOverlayManager();
+
+        if (xTargetOverlay.is())
+        {
+            std::unique_ptr<sdr::overlay::OverlayPolyPolygonStripedAndFilled> pNew(new sdr::overlay::OverlayPolyPolygonStripedAndFilled(
+                rLinePolyPolygon));
+
+            xTargetOverlay->add(*pNew);
+            maObjects.append(std::move(pNew));
+        }
+    }
+}
+
+SdrDropMarkerOverlay::SdrDropMarkerOverlay(const SdrView& rView, const SdrObject& rObject)
+{
+    ImplCreateOverlays(
+        rView,
+        rObject.TakeXorPoly());
+}
+
+SdrDropMarkerOverlay::SdrDropMarkerOverlay(const SdrView& rView, const tools::Rectangle& rRectangle)
+{
+    basegfx::B2DPolygon aB2DPolygon;
+
+    aB2DPolygon.append(basegfx::B2DPoint(rRectangle.Left(), rRectangle.Top()));
+    aB2DPolygon.append(basegfx::B2DPoint(rRectangle.Right(), rRectangle.Top()));
+    aB2DPolygon.append(basegfx::B2DPoint(rRectangle.Right(), rRectangle.Bottom()));
+    aB2DPolygon.append(basegfx::B2DPoint(rRectangle.Left(), rRectangle.Bottom()));
+    aB2DPolygon.setClosed(true);
+
+    ImplCreateOverlays(
+        rView,
+        basegfx::B2DPolyPolygon(aB2DPolygon));
+}
+
+SdrDropMarkerOverlay::SdrDropMarkerOverlay(const SdrView& rView, const Point& rStart, const Point& rEnd)
+{
+    basegfx::B2DPolygon aB2DPolygon;
+
+    aB2DPolygon.append(basegfx::B2DPoint(rStart.X(), rStart.Y()));
+    aB2DPolygon.append(basegfx::B2DPoint(rEnd.X(), rEnd.Y()));
+    aB2DPolygon.setClosed(true);
+
+    ImplCreateOverlays(
+        rView,
+        basegfx::B2DPolyPolygon(aB2DPolygon));
+}
+
+SdrDropMarkerOverlay::~SdrDropMarkerOverlay()
+{
+    // The OverlayObjects are cleared using the destructor of OverlayObjectList.
+    // That destructor calls clear() at the list which removes all objects from the
+    // OverlayManager and deletes them.
+}
+
+SdrView::SdrView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrCreateView(rSdrModel, pOut),
+    bNoExtendedMouseDispatcher(false),
+    bNoExtendedKeyDispatcher(false),
+    mbMasterPagePaintCaching(false)
+{
+    maAccessibilityOptions.AddListener(this);
+    onAccessibilityOptionsChanged();
+}
+
+SdrView::~SdrView()
+{
+    maAccessibilityOptions.RemoveListener(this);
+}
+
+bool SdrView::KeyInput(const KeyEvent& rKEvt, vcl::Window* pWin)
+{
+    SetActualWin(pWin);
+    bool bRet = SdrCreateView::KeyInput(rKEvt,pWin);
+    if (!bRet && !IsExtendedKeyInputDispatcherEnabled()) {
+        bRet = true;
+        switch (rKEvt.GetKeyCode().GetFullFunction()) {
+            case KeyFuncType::DELETE: DeleteMarked(); break;
+            case KeyFuncType::UNDO: mpModel->Undo(); break;
+            case KeyFuncType::REDO: mpModel->Redo(); break;
+            case KeyFuncType::REPEAT: mpModel->Repeat(*this); break;
+            default: {
+                switch (rKEvt.GetKeyCode().GetFullCode()) {
+                    case KEY_ESCAPE: {
+                        if (IsTextEdit()) SdrEndTextEdit();
+                        if (IsAction()) BrkAction();
+                        if (pWin!=nullptr) pWin->ReleaseMouse();
+                    } break;
+                    case KEY_DELETE: DeleteMarked(); break;
+                    case KEY_UNDO: case KEY_BACKSPACE+KEY_MOD2: mpModel->Undo(); break;
+                    case KEY_BACKSPACE+KEY_MOD2+KEY_SHIFT: mpModel->Redo(); break;
+                    case KEY_REPEAT: case KEY_BACKSPACE+KEY_MOD2+KEY_MOD1: mpModel->Repeat(*this); break;
+                    case KEY_MOD1+KEY_A: MarkAll(); break;
+                    default: bRet=false;
+                } // switch
+            }
+        } // switch
+        if (bRet && pWin!=nullptr) {
+            pWin->SetPointer(GetPreferredPointer(
+                pWin->PixelToLogic(pWin->ScreenToOutputPixel( pWin->GetPointerPosPixel() ) ),
+                pWin,
+                rKEvt.GetKeyCode().GetModifier()));
+        }
+    }
+    return bRet;
+}
+
+bool SdrView::MouseButtonDown(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    SetActualWin(pWin);
+    if (rMEvt.IsLeft()) maDragStat.SetMouseDown(true);
+    bool bRet = SdrCreateView::MouseButtonDown(rMEvt,pWin);
+    if (!bRet && !IsExtendedMouseEventDispatcherEnabled()) {
+        SdrViewEvent aVEvt;
+        PickAnything(rMEvt,SdrMouseEventKind::BUTTONDOWN,aVEvt);
+        bRet = DoMouseEvent(aVEvt);
+    }
+    return bRet;
+}
+
+bool SdrView::MouseButtonUp(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    SetActualWin(pWin);
+    if (rMEvt.IsLeft()) maDragStat.SetMouseDown(false);
+    bool bAction = IsAction();
+    bool bRet = !bAction && SdrCreateView::MouseButtonUp(rMEvt,pWin);
+    if (!bRet && !IsExtendedMouseEventDispatcherEnabled()) {
+        SdrViewEvent aVEvt;
+        PickAnything(rMEvt,SdrMouseEventKind::BUTTONUP,aVEvt);
+        bRet = DoMouseEvent(aVEvt);
+    }
+    return bRet;
+}
+
+bool SdrView::MouseMove(const MouseEvent& rMEvt, OutputDevice* pWin)
+{
+    SetActualWin(pWin);
+    maDragStat.SetMouseDown(rMEvt.IsLeft());
+    bool bRet = SdrCreateView::MouseMove(rMEvt,pWin);
+    if (!IsExtendedMouseEventDispatcherEnabled() && !IsTextEditInSelectionMode()) {
+        SdrViewEvent aVEvt;
+        PickAnything(rMEvt,SdrMouseEventKind::MOVE,aVEvt);
+        if (DoMouseEvent(aVEvt)) bRet=true;
+    }
+
+    return bRet;
+}
+
+bool SdrView::Command(const CommandEvent& rCEvt, vcl::Window* pWin)
+{
+    SetActualWin(pWin);
+    bool bRet = SdrCreateView::Command(rCEvt,pWin);
+    return bRet;
+}
+
+void SdrView::GetAttributes(SfxItemSet& rTargetSet, bool bOnlyHardAttr) const
+{
+    SdrCreateView::GetAttributes(rTargetSet, bOnlyHardAttr);
+}
+
+SdrHitKind SdrView::PickAnything(const MouseEvent& rMEvt, SdrMouseEventKind nEventKind, SdrViewEvent& rVEvt) const
+{
+    rVEvt.bMouseDown=nEventKind==SdrMouseEventKind::BUTTONDOWN;
+    rVEvt.bMouseUp=nEventKind==SdrMouseEventKind::BUTTONUP;
+    rVEvt.nMouseClicks=rMEvt.GetClicks();
+    rVEvt.nMouseMode=rMEvt.GetMode();
+    rVEvt.nMouseCode=rMEvt.GetButtons() | rMEvt.GetModifier();
+    const OutputDevice* pOut=mpActualOutDev;
+    if (pOut==nullptr)
+    {
+        pOut = GetFirstOutputDevice();
+    }
+    Point aPnt(rMEvt.GetPosPixel());
+    if (pOut!=nullptr) aPnt=pOut->PixelToLogic(aPnt);
+    rVEvt.aLogicPos=aPnt;
+    return PickAnything(aPnt,rVEvt);
+}
+
+// Dragging with the Mouse (Move)
+// Example when creating a rectangle: MouseDown has to happen without a ModKey,
+// else we usually force a selection (see below).
+// When pressing Shift, Ctrl and Alt at the same time while doing a MouseMove,
+// a centered, not snapped square is created.
+// The dual allocation of Ortho and Shift won't usually create a problem, as the
+// two functions are in most cases mutually exclusive. Only shearing (the kind
+// that happens when contorting, not when rotating) can use both functions at
+// the same time. To get around this, the user can use e. g. help lines.
+#define MODKEY_NoSnap    bCtrl  /* temporarily disable snapping */
+#define MODKEY_Ortho     bShift /* ortho */
+#define MODKEY_Center    bAlt   /* create/resize centeredly */
+#define MODKEY_AngleSnap bShift
+#define MODKEY_CopyDrag  bCtrl  /* drag and copy */
+
+// click somewhere (MouseDown)
+#define MODKEY_PolyPoly  bAlt   /* new Poly at InsPt and at Create */
+#define MODKEY_MultiMark bShift /* MarkObj without doing UnmarkAll first */
+#define MODKEY_Unmark    bAlt   /* deselect with a dragged frame */
+#define MODKEY_ForceMark bCtrl  /* force dragging a frame, even if there's an object at cursor position */
+#define MODKEY_DeepMark  bAlt   /* MarkNextObj */
+#define MODKEY_DeepBackw bShift /* MarkNextObj but backwards */
+
+SdrHitKind SdrView::PickAnything(const Point& rLogicPos, SdrViewEvent& rVEvt) const
+{
+    const OutputDevice* pOut=mpActualOutDev;
+    if (pOut==nullptr)
+    {
+        pOut = GetFirstOutputDevice();
+    }
+
+    // #i73628# Use a non-changeable copy of he logic position
+    const Point aLocalLogicPosition(rLogicPos);
+
+    bool bEditMode=IsEditMode();
+    bool bPointMode=bEditMode && HasMarkablePoints();
+    bool bGluePointMode=IsGluePointEditMode();
+    bool bInsPolyPt=bPointMode && IsInsObjPointMode() && IsInsObjPointPossible();
+    bool bInsGluePt=bGluePointMode && IsInsGluePointMode() && IsInsGluePointPossible();
+    bool bIsTextEdit=IsTextEdit();
+    bool bTextEditHit=IsTextEditHit(aLocalLogicPosition);
+    bool bTextEditSel=IsTextEditInSelectionMode();
+    bool bShift=(rVEvt.nMouseCode & KEY_SHIFT) !=0;
+    bool bCtrl=(rVEvt.nMouseCode & KEY_MOD1) !=0;
+    bool bAlt=(rVEvt.nMouseCode & KEY_MOD2) !=0;
+    SdrHitKind eHit=SdrHitKind::NONE;
+    SdrHdl* pHdl=pOut!=nullptr && !bTextEditSel ? PickHandle(aLocalLogicPosition) : nullptr;
+    SdrPageView* pPV=nullptr;
+    SdrObject* pObj=nullptr;
+    SdrObject* pHitObj=nullptr;
+    bool bHitPassDirect=true;
+    sal_uInt16 nHlplIdx=0;
+    sal_uInt16 nGlueId=0;
+    if (bTextEditHit || bTextEditSel)
+    {
+        eHit=SdrHitKind::TextEdit;
+    }
+    else if (pHdl!=nullptr)
+    {
+        eHit=SdrHitKind::Handle; // handle is hit: highest priority
+    }
+    else if (bEditMode && IsHlplVisible() && IsHlplFront() && pOut!=nullptr && PickHelpLine(aLocalLogicPosition,mnHitTolLog,*pOut,nHlplIdx,pPV))
+    {
+        eHit=SdrHitKind::HelpLine; // help line in the foreground hit: can be moved now
+    }
+    else if (bGluePointMode && PickGluePoint(aLocalLogicPosition,pObj,nGlueId,pPV))
+    {
+        eHit=SdrHitKind::Gluepoint; // deselected glue point hit
+    }
+    else if ((pHitObj = PickObj(aLocalLogicPosition,mnHitTolLog,pPV,SdrSearchOptions::DEEP|SdrSearchOptions::MARKED,&pObj,&bHitPassDirect)))
+    {
+        eHit=SdrHitKind::MarkedObject;
+        sdr::table::SdrTableObj* pTableObj = dynamic_cast< sdr::table::SdrTableObj* >( pObj );
+        if( pTableObj )
+        {
+            sal_Int32 nX = 0, nY = 0;
+            switch( pTableObj->CheckTableHit( aLocalLogicPosition, nX, nY ) )
+            {
+                case sdr::table::TableHitKind::Cell:
+                    eHit = SdrHitKind::Cell;
+                    break;
+                case sdr::table::TableHitKind::CellTextArea:
+                    eHit = SdrHitKind::TextEditObj;
+                    break;
+                default:
+                    break;
+            }
+        }
+    }
+    else if ((pHitObj = PickObj(aLocalLogicPosition,mnHitTolLog,pPV,SdrSearchOptions::DEEP|SdrSearchOptions::ALSOONMASTER|SdrSearchOptions::WHOLEPAGE,&pObj,&bHitPassDirect)))
+    {
+        // MasterPages and WholePage for Macro and URL
+        eHit=SdrHitKind::UnmarkedObject;
+        sdr::table::SdrTableObj* pTableObj = dynamic_cast< sdr::table::SdrTableObj* >( pObj );
+        if( pTableObj )
+        {
+            sal_Int32 nX = 0, nY = 0;
+            switch( pTableObj->CheckTableHit( aLocalLogicPosition, nX, nY, mnHitTolLog ) )
+            {
+                case sdr::table::TableHitKind::Cell:
+                    eHit = SdrHitKind::Cell;
+                    break;
+                case sdr::table::TableHitKind::CellTextArea:
+                    // Keep state on UnmarkedObject to allow the below
+                    // 'check for URL field' to be executed, else popups
+                    // for e.g. URL links when hoovering and clicking
+                    // them will not work. Tried several other changes,
+                    // but this one safely keeps existing behaviour as-is.
+                    eHit = SdrHitKind::UnmarkedObject;
+                    break;
+                default:
+                    break;
+            }
+        }
+    }
+    else if (bEditMode && IsHlplVisible() && !IsHlplFront() && pOut!=nullptr && PickHelpLine(aLocalLogicPosition,mnHitTolLog,*pOut,nHlplIdx,pPV))
+    {
+        eHit=SdrHitKind::HelpLine; // help line in foreground hit: can be moved now
+    }
+    if (eHit==SdrHitKind::UnmarkedObject)
+    {
+        bool bRoot=pObj->HasMacro();
+        bool bDeep=pObj!=pHitObj && pHitObj->HasMacro();
+        bool bMid=false; // Have we hit upon a grouped group with a macro?
+        SdrObject* pMidObj=nullptr;
+        if (pObj!=pHitObj)
+        {
+            SdrObject* pObjTmp=pHitObj->getParentSdrObjectFromSdrObject();
+            if (pObjTmp==pObj) pObjTmp=nullptr;
+            while (pObjTmp!=nullptr)
+            {
+                if (pObjTmp->HasMacro())
+                {
+                    bMid=true;
+                    pMidObj=pObjTmp;
+                }
+                pObjTmp=pObjTmp->getParentSdrObjectFromSdrObject();
+                if (pObjTmp==pObj) pObjTmp=nullptr;
+            }
+        }
+
+        if (bDeep || bMid || bRoot)
+        {
+            SdrObjMacroHitRec aHitRec;
+            aHitRec.aPos=aLocalLogicPosition;
+            aHitRec.nTol=mnHitTolLog;
+            aHitRec.pVisiLayer=&pPV->GetVisibleLayers();
+            aHitRec.pPageView=pPV;
+            if (bDeep) bDeep=pHitObj->IsMacroHit(aHitRec);
+            if (bMid ) bMid =pMidObj->IsMacroHit(aHitRec);
+            if (bRoot) bRoot=pObj->IsMacroHit(aHitRec);
+            if (bRoot || bMid || bDeep)
+            {
+                // Priorities: 1. Root, 2. Mid, 3. Deep
+                rVEvt.pRootObj=pObj;
+                if (!bRoot) pObj=pMidObj;
+                if (!bRoot && !bMid) pObj=pHitObj;
+                eHit=SdrHitKind::Macro;
+            }
+        }
+    }
+    // check for URL field
+    if (eHit==SdrHitKind::UnmarkedObject)
+    {
+        SdrTextObj* pTextObj=dynamic_cast<SdrTextObj*>( pHitObj );
+        if (pTextObj!=nullptr && pTextObj->HasText())
+        {
+            // use the primitive-based HitTest which is more accurate anyways. It
+            // will correctly handle rotated/mirrored/sheared/scaled text and can
+            // now return a HitContainer containing the primitive hierarchy of the
+            // primitive that triggered the hit. The first entry is that primitive,
+            // the others are the full stack of primitives leading to that one which
+            // includes grouping primitives (like TextHierarchyPrimitives we deed here)
+            // but also all decomposed ones which lead to the creation of that primitive
+            drawinglayer::primitive2d::Primitive2DContainer aHitContainer;
+            const bool bTEHit(pPV && SdrObjectPrimitiveHit(*pTextObj, aLocalLogicPosition, 0, *pPV, &pPV->GetVisibleLayers(), true, &aHitContainer));
+
+            if (bTEHit && !aHitContainer.empty())
+            {
+                // search for TextHierarchyFieldPrimitive2D which contains the needed information
+                // about a possible URLField
+                const drawinglayer::primitive2d::TextHierarchyFieldPrimitive2D* pTextHierarchyFieldPrimitive2D = nullptr;
+
+                for (const drawinglayer::primitive2d::Primitive2DReference& xReference : aHitContainer)
+                {
+                    if (xReference.is())
+                    {
+                        // try to cast to drawinglayer::primitive2d::TextHierarchyFieldPrimitive2D implementation
+                        pTextHierarchyFieldPrimitive2D = dynamic_cast<const drawinglayer::primitive2d::TextHierarchyFieldPrimitive2D*>(xReference.get());
+
+                        if (pTextHierarchyFieldPrimitive2D)
+                        {
+                            break;
+                        }
+                    }
+                }
+
+                if (nullptr != pTextHierarchyFieldPrimitive2D)
+                {
+                    if (drawinglayer::primitive2d::FieldType::FIELD_TYPE_URL == pTextHierarchyFieldPrimitive2D->getType())
+                    {
+                        // problem with the old code is that a *pointer* to an instance of
+                        // SvxURLField is set in the Event which is per se not good since that
+                        // data comes from a temporary EditEngine's data and could vanish any
+                        // moment. Have to replace for now with a static instance that gets
+                        // filled/initialized from the original data held in the TextHierarchyField-
+                        // Primitive2D (see impTextBreakupHandler::impCheckFieldPrimitive).
+                        // Unfortunately things like 'TargetFrame' are still used in Calc, so this
+                        // can currently not get replaced. For the future the Name/Value vector or
+                        // the TextHierarchyFieldPrimitive2D itself should/will be used for handling
+                        // that data
+                        static SvxURLField aSvxURLField;
+
+                        aSvxURLField.SetURL(pTextHierarchyFieldPrimitive2D->getValue("URL"));
+                        aSvxURLField.SetRepresentation(pTextHierarchyFieldPrimitive2D->getValue("Representation"));
+                        aSvxURLField.SetTargetFrame(pTextHierarchyFieldPrimitive2D->getValue("TargetFrame"));
+                        const OUString aFormat(pTextHierarchyFieldPrimitive2D->getValue("SvxURLFormat"));
+
+                        if (!aFormat.isEmpty())
+                        {
+                            aSvxURLField.SetFormat(static_cast<SvxURLFormat>(aFormat.toInt32()));
+                        }
+
+                        // set HitKind and pointer to local static instance in the Event
+                        // to comply to old stuff
+                        eHit = SdrHitKind::UrlField;
+                        rVEvt.pURLField = &aSvxURLField;
+                    }
+                }
+            }
+        }
+    }
+
+    if (bHitPassDirect &&
+        (eHit==SdrHitKind::MarkedObject || eHit==SdrHitKind::UnmarkedObject) &&
+        (IsTextTool() || (IsEditMode() && IsQuickTextEditMode())) && pHitObj->HasTextEdit())
+    {
+        // Around the TextEditArea there's a border to select without going into text edit mode.
+        tools::Rectangle aBoundRect(pHitObj->GetCurrentBoundRect());
+
+        // Force to SnapRect when Fontwork
+        if( dynamic_cast<const SdrTextObj*>( pHitObj) != nullptr && static_cast<SdrTextObj*>(pHitObj)->IsFontwork())
+        {
+            aBoundRect = pHitObj->GetSnapRect();
+        }
+
+        sal_Int32 nTolerance(mnHitTolLog);
+        bool bBoundRectHit(false);
+
+        if(pOut)
+        {
+            nTolerance = pOut->PixelToLogic(Size(2, 0)).Width();
+        }
+
+        if( (aLocalLogicPosition.X() >= aBoundRect.Left() - nTolerance && aLocalLogicPosition.X() <= aBoundRect.Left() + nTolerance)
+         || (aLocalLogicPosition.X() >= aBoundRect.Right() - nTolerance && aLocalLogicPosition.X() <= aBoundRect.Right() + nTolerance)
+         || (aLocalLogicPosition.Y() >= aBoundRect.Top() - nTolerance && aLocalLogicPosition.Y() <= aBoundRect.Top() + nTolerance)
+         || (aLocalLogicPosition.Y() >= aBoundRect.Bottom() - nTolerance && aLocalLogicPosition.Y() <= aBoundRect.Bottom() + nTolerance))
+        {
+            bBoundRectHit = true;
+        }
+
+        if(!bBoundRectHit)
+        {
+            bool bTEHit(pPV &&
+                SdrObjectPrimitiveHit(*pHitObj, aLocalLogicPosition, 0, *pPV, &pPV->GetVisibleLayers(), true));
+
+            // TextEdit attached to an object in a locked layer
+            if (pPV->GetLockedLayers().IsSet(pHitObj->GetLayer()))
+            {
+                bTEHit=false;
+            }
+
+            if (bTEHit)
+            {
+                rVEvt.pRootObj=pObj;
+                pObj=pHitObj;
+                eHit=SdrHitKind::TextEditObj;
+            }
+        }
+    }
+    if (!bHitPassDirect && eHit==SdrHitKind::UnmarkedObject) {
+        eHit=SdrHitKind::NONE;
+        pObj=nullptr;
+        pPV=nullptr;
+    }
+    bool bMouseLeft=(rVEvt.nMouseCode&MOUSE_LEFT)!=0;
+    bool bMouseRight=(rVEvt.nMouseCode&MOUSE_RIGHT)!=0;
+    bool bMouseDown=rVEvt.bMouseDown;
+    bool bMouseUp=rVEvt.bMouseUp;
+    SdrEventKind eEvent=SdrEventKind::NONE;
+    bool bIsAction=IsAction();
+
+    if (bIsAction)
+    {
+        if (bMouseDown)
+        {
+            if (bMouseRight) eEvent=SdrEventKind::BackAction;
+        }
+        else if (bMouseUp)
+        {
+            if (bMouseLeft)
+            {
+                eEvent=SdrEventKind::EndAction;
+                if (IsDragObj())
+                {
+                    eEvent=SdrEventKind::EndDrag;
+                }
+                else if (IsCreateObj() || IsInsObjPoint())
+                {
+                    eEvent=IsCreateObj() ? SdrEventKind::EndCreate : SdrEventKind::EndInsertObjPoint;
+                }
+                else if (IsMarking())
+                {
+                    eEvent=SdrEventKind::EndMark;
+                    if (!maDragStat.IsMinMoved())
+                    {
+                        eEvent=SdrEventKind::BrkMark;
+                        rVEvt.bAddMark=MODKEY_MultiMark;
+                    }
+                }
+            }
+        }
+        else
+        {
+            eEvent=SdrEventKind::MoveAction;
+        }
+    }
+    else if (eHit==SdrHitKind::TextEdit)
+    {
+        eEvent=SdrEventKind::TextEdit;
+    }
+    else if (bMouseDown && bMouseLeft)
+    {
+        if (rVEvt.nMouseClicks==2 && rVEvt.nMouseCode==MOUSE_LEFT && pObj!=nullptr && pHitObj!=nullptr && pHitObj->HasTextEdit() && eHit==SdrHitKind::MarkedObject)
+        {
+            rVEvt.pRootObj=pObj;
+            pObj=pHitObj;
+            eEvent=SdrEventKind::BeginTextEdit;
+        }
+        else if (MODKEY_ForceMark && eHit!=SdrHitKind::UrlField)
+        {
+            eEvent=SdrEventKind::BeginMark; // AddMark,Unmark */
+        }
+        else if (eHit==SdrHitKind::HelpLine)
+        {
+            eEvent=SdrEventKind::BeginDragHelpline; // nothing, actually
+        }
+        else if (eHit==SdrHitKind::Gluepoint)
+        {
+            eEvent=SdrEventKind::MarkGluePoint; // AddMark+Drag
+            rVEvt.bAddMark=MODKEY_MultiMark || MODKEY_DeepMark; // if not hit with Deep
+        }
+        else if (eHit==SdrHitKind::Handle)
+        {
+            eEvent=SdrEventKind::BeginDragObj;    // Mark+Drag,AddMark+Drag,DeepMark+Drag,Unmark
+            bool bGlue=pHdl->GetKind()==SdrHdlKind::Glue;
+            bool bPoly=!bGlue && IsPointMarkable(*pHdl);
+            bool bMarked=bGlue || (bPoly && pHdl->IsSelected());
+            if (bGlue || bPoly)
+            {
+                eEvent=bGlue ? SdrEventKind::MarkGluePoint : SdrEventKind::MarkPoint;
+                if (MODKEY_DeepMark)
+                {
+                    rVEvt.bAddMark=true;
+                    rVEvt.bPrevNextMark=true;
+                    rVEvt.bMarkPrev=MODKEY_DeepBackw;
+                }
+                else if (MODKEY_MultiMark)
+                {
+                    rVEvt.bAddMark=true;
+                    rVEvt.bUnmark=bMarked; // Toggle
+                    if (bGlue)
+                    {
+                        pObj=pHdl->GetObj();
+                        nGlueId=static_cast<sal_uInt16>(pHdl->GetObjHdlNum());
+                    }
+                }
+                else if (bMarked)
+                {
+                    eEvent=SdrEventKind::BeginDragObj; // don't change MarkState, only change Drag
+                }
+            }
+        }
+        else if (bInsPolyPt && (MODKEY_PolyPoly || (!MODKEY_MultiMark && !MODKEY_DeepMark)))
+        {
+            eEvent=SdrEventKind::BeginInsertObjPoint;
+        }
+        else if (bInsGluePt && !MODKEY_MultiMark && !MODKEY_DeepMark)
+        {
+            eEvent=SdrEventKind::BeginInsertGluePoint;
+        }
+        else if (eHit==SdrHitKind::TextEditObj)
+        {
+            eEvent=SdrEventKind::BeginTextEdit; // AddMark+Drag,DeepMark+Drag,Unmark
+            if (MODKEY_MultiMark || MODKEY_DeepMark)
+            { // if not hit with Deep
+                eEvent=SdrEventKind::MarkObj;
+            }
+        }
+        else if (eHit==SdrHitKind::Macro)
+        {
+            eEvent=SdrEventKind::BeginMacroObj;       // AddMark+Drag
+            if (MODKEY_MultiMark || MODKEY_DeepMark)
+            { // if not hit with Deep
+                eEvent=SdrEventKind::MarkObj;
+            }
+        }
+        else if (eHit==SdrHitKind::UrlField)
+        {
+            eEvent=SdrEventKind::ExecuteUrl;       // AddMark+Drag
+            if (MODKEY_MultiMark || MODKEY_DeepMark)
+            { // if not hit with Deep
+                eEvent=SdrEventKind::MarkObj;
+            }
+        }
+        else if (eHit==SdrHitKind::MarkedObject)
+        {
+            eEvent=SdrEventKind::BeginDragObj; // DeepMark+Drag,Unmark
+
+            if (MODKEY_MultiMark || MODKEY_DeepMark)
+            { // if not hit with Deep
+                eEvent=SdrEventKind::MarkObj;
+            }
+        }
+        else if (IsCreateMode())
+        {
+            eEvent=SdrEventKind::BeginCreateObj;          // nothing, actually
+        }
+        else if (eHit==SdrHitKind::UnmarkedObject)
+        {
+            eEvent=SdrEventKind::MarkObj;  // AddMark+Drag
+        }
+        else
+        {
+            eEvent=SdrEventKind::BeginMark;
+        }
+
+        if (eEvent==SdrEventKind::MarkObj)
+        {
+            rVEvt.bAddMark=MODKEY_MultiMark || MODKEY_DeepMark; // if not hit with Deep
+            rVEvt.bPrevNextMark=MODKEY_DeepMark;
+            rVEvt.bMarkPrev=MODKEY_DeepMark && MODKEY_DeepBackw;
+        }
+        if (eEvent==SdrEventKind::BeginMark)
+        {
+            rVEvt.bAddMark=MODKEY_MultiMark;
+            rVEvt.bUnmark=MODKEY_Unmark;
+        }
+    }
+    rVEvt.bIsAction=bIsAction;
+    rVEvt.bIsTextEdit=bIsTextEdit;
+    rVEvt.aLogicPos=aLocalLogicPosition;
+    rVEvt.pHdl=pHdl;
+    rVEvt.pObj=pObj;
+    if(rVEvt.pRootObj==nullptr)
+        rVEvt.pRootObj=pObj;
+    rVEvt.pPV=pPV;
+    rVEvt.nHlplIdx=nHlplIdx;
+    rVEvt.nGlueId=nGlueId;
+    rVEvt.eHit=eHit;
+    rVEvt.eEvent=eEvent;
+#ifdef DGB_UTIL
+    if (rVEvt.pRootObj!=NULL) {
+        if (rVEvt.pRootObj->getParentSdrObjListFromSdrObject()!=rVEvt.pPV->GetObjList()) {
+            OSL_FAIL("SdrView::PickAnything(): pRootObj->getParentSdrObjListFromSdrObject()!=pPV->GetObjList() !");
+        }
+    }
+#endif
+    return eHit;
+}
+
+bool SdrView::DoMouseEvent(const SdrViewEvent& rVEvt)
+{
+    bool bRet=false;
+    SdrHitKind eHit=rVEvt.eHit;
+    Point aLogicPos(rVEvt.aLogicPos);
+
+    bool bShift=(rVEvt.nMouseCode & KEY_SHIFT) !=0;
+    bool bCtrl=(rVEvt.nMouseCode & KEY_MOD1) !=0;
+    bool bAlt=(rVEvt.nMouseCode & KEY_MOD2) !=0;
+    bool bMouseLeft=(rVEvt.nMouseCode&MOUSE_LEFT)!=0;
+    bool bMouseDown=rVEvt.bMouseDown;
+    bool bMouseUp=rVEvt.bMouseUp;
+    if (bMouseDown) {
+        if (bMouseLeft) maDragStat.SetMouseDown(true);
+    } else if (bMouseUp) {
+        if (bMouseLeft) maDragStat.SetMouseDown(false);
+    } else { // else, MouseMove
+        maDragStat.SetMouseDown(bMouseLeft);
+    }
+
+#ifdef MODKEY_NoSnap
+    SetSnapEnabled(!MODKEY_NoSnap);
+#endif
+#ifdef MODKEY_Ortho
+    SetOrtho(MODKEY_Ortho!=IsOrthoDesired());
+#endif
+#ifdef MODKEY_AngleSnap
+    SetAngleSnapEnabled(MODKEY_AngleSnap);
+#endif
+#ifdef MODKEY_CopyDrag
+    SetDragWithCopy(MODKEY_CopyDrag);
+#endif
+#ifdef MODKEY_Center
+    SetCreate1stPointAsCenter(MODKEY_Center);
+    SetResizeAtCenter(MODKEY_Center);
+    SetCrookAtCenter(MODKEY_Center);
+#endif
+    if (bMouseLeft && bMouseDown && rVEvt.bIsTextEdit && (eHit==SdrHitKind::UnmarkedObject || eHit==SdrHitKind::NONE)) {
+        SdrEndTextEdit(); // User has clicked beneath object, exit edit mode.
+        // pHdl is invalid, then, that shouldn't matter, though, as we expect
+        // pHdl==NULL (because of eHit).
+    }
+    switch (rVEvt.eEvent) {
+        case SdrEventKind::NONE: bRet=false; break;
+        case SdrEventKind::TextEdit: bRet=false; break; // Events handled by the OutlinerView are not taken into account here.
+        case SdrEventKind::MoveAction: MovAction(aLogicPos); bRet=true; break;
+        case SdrEventKind::EndAction: EndAction(); bRet=true; break;
+        case SdrEventKind::BackAction: BckAction(); bRet=true; break;
+        case SdrEventKind::EndMark  : EndAction(); bRet=true; break;
+        case SdrEventKind::BrkMark  : {
+            BrkAction();
+            if (!MarkObj(aLogicPos,mnHitTolLog,rVEvt.bAddMark)) {
+                // No object hit. Do the following:
+                // 1. deselect any selected glue points
+                // 2. deselect any selected polygon points
+                // 3. deselect any selected objects
+                if (!rVEvt.bAddMark) UnmarkAll();
+            }
+            bRet=true;
+        } break;
+        case SdrEventKind::EndCreate: { // if necessary, MarkObj
+            SdrCreateCmd eCmd=SdrCreateCmd::NextPoint;
+            if (MODKEY_PolyPoly) eCmd=SdrCreateCmd::NextObject;
+            if (rVEvt.nMouseClicks>1) eCmd=SdrCreateCmd::ForceEnd;
+            if (!EndCreateObj(eCmd)) { // Don't evaluate event for Create? -> Select
+                if (eHit==SdrHitKind::UnmarkedObject || eHit==SdrHitKind::TextEdit) {
+                    MarkObj(rVEvt.pRootObj,rVEvt.pPV);
+                    if (eHit==SdrHitKind::TextEdit)
+                    {
+                        bool bRet2(mpActualOutDev && OUTDEV_WINDOW == mpActualOutDev->GetOutDevType() &&
+                            SdrBeginTextEdit(rVEvt.pObj, rVEvt.pPV, static_cast<vcl::Window*>(mpActualOutDev.get())));
+
+                        if(bRet2)
+                        {
+                            MouseEvent aMEvt(mpActualOutDev->LogicToPixel(aLogicPos),
+                                             1,rVEvt.nMouseMode,rVEvt.nMouseCode,rVEvt.nMouseCode);
+
+                            OutlinerView* pOLV=GetTextEditOutlinerView();
+                            if (pOLV!=nullptr) {
+                                pOLV->MouseButtonDown(aMEvt); // event for the Outliner, but without double-click
+                                pOLV->MouseButtonUp(aMEvt); // event for the Outliner, but without double-click
+                            }
+                        }
+                    }
+                    bRet=true; // object is selected and (if necessary) TextEdit is started
+                } else bRet=false; // canceled Create, nothing else
+            } else bRet=true; // return true for EndCreate
+        } break;
+        case SdrEventKind::EndDrag: {
+            bRet=EndDragObj(IsDragWithCopy());
+            ForceMarkedObjToAnotherPage(); // TODO: Undo+bracing missing!
+        } break;
+        case SdrEventKind::MarkObj: { // + (if applicable) BegDrag
+            if (!rVEvt.bAddMark) UnmarkAllObj();
+            bool bUnmark=rVEvt.bUnmark;
+            if (rVEvt.bPrevNextMark) {
+                bRet=MarkNextObj(aLogicPos,mnHitTolLog,rVEvt.bMarkPrev);
+            } else {
+                SortMarkedObjects();
+                const size_t nCount0=GetMarkedObjectCount();
+                bRet=MarkObj(aLogicPos,mnHitTolLog,rVEvt.bAddMark);
+                SortMarkedObjects();
+                const size_t nCount1=GetMarkedObjectCount();
+                bUnmark=nCount1<nCount0;
+            }
+            if (!bUnmark) {
+                BegDragObj(aLogicPos,nullptr,nullptr,mnMinMovLog);
+                bRet=true;
+            }
+        } break;
+        case SdrEventKind::MarkPoint: { // + (if applicable) BegDrag
+            if (!rVEvt.bAddMark) UnmarkAllPoints();
+            if (rVEvt.bPrevNextMark) {
+                MarkNextPoint();
+                bRet=false;
+            } else {
+                bRet=MarkPoint(*rVEvt.pHdl,rVEvt.bUnmark);
+            }
+            if (!rVEvt.bUnmark && !rVEvt.bPrevNextMark) {
+                BegDragObj(aLogicPos,nullptr,rVEvt.pHdl,mnMinMovLog);
+                bRet=true;
+            }
+        } break;
+        case SdrEventKind::MarkGluePoint: { // + (if applicable) BegDrag
+            if (!rVEvt.bAddMark) UnmarkAllGluePoints();
+            if (rVEvt.bPrevNextMark) {
+                MarkNextGluePoint();
+                bRet=false;
+            } else {
+                bRet=MarkGluePoint(rVEvt.pObj,rVEvt.nGlueId,rVEvt.bUnmark);
+            }
+            if (!rVEvt.bUnmark && !rVEvt.bPrevNextMark) {
+                SdrHdl* pHdl=GetGluePointHdl(rVEvt.pObj,rVEvt.nGlueId);
+                BegDragObj(aLogicPos,nullptr,pHdl,mnMinMovLog);
+                bRet=true;
+            }
+        } break;
+        case SdrEventKind::BeginMark: bRet=BegMark(aLogicPos,rVEvt.bAddMark,rVEvt.bUnmark); break;
+        case SdrEventKind::BeginInsertObjPoint: bRet = BegInsObjPoint(aLogicPos, MODKEY_PolyPoly); break;
+        case SdrEventKind::EndInsertObjPoint: {
+            SdrCreateCmd eCmd=SdrCreateCmd::NextPoint;
+            if (MODKEY_PolyPoly) eCmd=SdrCreateCmd::NextObject;
+            if (rVEvt.nMouseClicks>1) eCmd=SdrCreateCmd::ForceEnd;
+            EndInsObjPoint(eCmd);
+            bRet=true;
+        } break;
+        case SdrEventKind::BeginInsertGluePoint: bRet=BegInsGluePoint(aLogicPos); break;
+        case SdrEventKind::BeginDragHelpline: bRet=BegDragHelpLine(rVEvt.nHlplIdx,rVEvt.pPV); break;
+        case SdrEventKind::BeginDragObj: bRet=BegDragObj(aLogicPos,nullptr,rVEvt.pHdl,mnMinMovLog); break;
+        case SdrEventKind::BeginCreateObj: {
+            if (nCurrentInvent==SdrInventor::Default && nCurrentIdent==OBJ_CAPTION) {
+                long nHgt=SdrEngineDefaults::GetFontHeight();
+                bRet=BegCreateCaptionObj(aLogicPos,Size(5*nHgt,2*nHgt));
+            } else bRet=BegCreateObj(aLogicPos);
+        } break;
+        case SdrEventKind::BeginMacroObj: {
+            BegMacroObj(aLogicPos,mnHitTolLog,rVEvt.pObj,rVEvt.pPV,static_cast<vcl::Window*>(mpActualOutDev.get()));
+            bRet=false;
+        } break;
+        case SdrEventKind::BeginTextEdit: {
+            if (!IsObjMarked(rVEvt.pObj)) {
+                UnmarkAllObj();
+                MarkObj(rVEvt.pRootObj,rVEvt.pPV);
+            }
+
+            bRet = mpActualOutDev && OUTDEV_WINDOW == mpActualOutDev->GetOutDevType()&&
+                 SdrBeginTextEdit(rVEvt.pObj, rVEvt.pPV, static_cast<vcl::Window*>(mpActualOutDev.get()));
+
+            if(bRet)
+            {
+                MouseEvent aMEvt(mpActualOutDev->LogicToPixel(aLogicPos),
+                                 1,rVEvt.nMouseMode,rVEvt.nMouseCode,rVEvt.nMouseCode);
+                OutlinerView* pOLV=GetTextEditOutlinerView();
+                if (pOLV!=nullptr) pOLV->MouseButtonDown(aMEvt); // event for the Outliner, but without double-click
+            }
+        } break;
+        default: break;
+    } // switch
+    if (bRet && mpActualOutDev && mpActualOutDev->GetOutDevType()==OUTDEV_WINDOW) {
+        vcl::Window* pWin=static_cast<vcl::Window*>(mpActualOutDev.get());
+        // left mouse button pressed?
+        bool bLeftDown=(rVEvt.nMouseCode&MOUSE_LEFT)!=0 && rVEvt.bMouseDown;
+        // left mouse button released?
+        bool bLeftUp=(rVEvt.nMouseCode&MOUSE_LEFT)!=0 && rVEvt.bMouseUp;
+        // left mouse button pressed or held?
+        bool bLeftDown1=(rVEvt.nMouseCode&MOUSE_LEFT)!=0 && !rVEvt.bMouseUp;
+        pWin->SetPointer(GetPreferredPointer(rVEvt.aLogicPos,pWin,
+                rVEvt.nMouseCode & (KEY_SHIFT|KEY_MOD1|KEY_MOD2),bLeftDown1));
+        bool bAction=IsAction();
+        if (bLeftDown && bAction)
+            pWin->CaptureMouse();
+        else if (bLeftUp || (rVEvt.bIsAction && !bAction))
+            pWin->ReleaseMouse();
+    }
+    return bRet;
+}
+
+PointerStyle SdrView::GetPreferredPointer(const Point& rMousePos, const OutputDevice* pOut, sal_uInt16 nModifier, bool bLeftDown) const
+{
+    // Actions
+    if (IsCreateObj())
+    {
+        return pCurrentCreate->GetCreatePointer();
+    }
+    if (mpCurrentSdrDragMethod)
+    {
+        return mpCurrentSdrDragMethod->GetSdrDragPointer();
+    }
+    if (IsMarkObj() || IsMarkPoints() || IsMarkGluePoints() || IsSetPageOrg()) return PointerStyle::Arrow;
+    if (IsDragHelpLine()) return GetDraggedHelpLinePointer();
+    if (IsMacroObj()) {
+        SdrObjMacroHitRec aHitRec;
+        aHitRec.aPos=pOut->LogicToPixel(rMousePos);
+        aHitRec.nTol=nMacroTol;
+        aHitRec.pVisiLayer=&pMacroPV->GetVisibleLayers();
+        aHitRec.pPageView=pMacroPV;
+        return pMacroObj->GetMacroPointer(aHitRec);
+    }
+
+    // TextEdit, ObjEdit, Macro
+    if (IsTextEdit() && (IsTextEditInSelectionMode() || IsTextEditHit(rMousePos)))
+    {
+        if(!pOut || IsTextEditInSelectionMode())
+        {
+            if(pTextEditOutliner->IsVertical())
+                return PointerStyle::TextVertical;
+            else
+                return PointerStyle::Text;
+        }
+        // Outliner should return something here...
+        Point aPos(pOut->LogicToPixel(rMousePos));
+        PointerStyle aPointer(pTextEditOutlinerView->GetPointer(aPos));
+        if (aPointer==PointerStyle::Arrow)
+        {
+            if(pTextEditOutliner->IsVertical())
+                aPointer = PointerStyle::TextVertical;
+            else
+                aPointer = PointerStyle::Text;
+        }
+        return aPointer;
+    }
+
+    SdrViewEvent aVEvt;
+    aVEvt.nMouseCode=(nModifier&(KEY_SHIFT|KEY_MOD1|KEY_MOD2))|MOUSE_LEFT; // to see what would happen on MouseLeftDown
+    aVEvt.bMouseDown=!bLeftDown; // What if ..?
+    aVEvt.bMouseUp=bLeftDown;    // What if ..?
+    if (pOut!=nullptr)
+        const_cast<SdrView*>(this)->SetActualWin(pOut);
+    SdrHitKind eHit=PickAnything(rMousePos,aVEvt);
+    SdrEventKind eEvent=aVEvt.eEvent;
+    switch (eEvent)
+    {
+        case SdrEventKind::BeginCreateObj:
+            return aCurrentCreatePointer;
+        case SdrEventKind::MarkObj:
+            return PointerStyle::Move;
+        case SdrEventKind::BeginMark:
+            return PointerStyle::Arrow;
+        case SdrEventKind::MarkPoint:
+        case SdrEventKind::MarkGluePoint:
+            return PointerStyle::MovePoint;
+        case SdrEventKind::BeginInsertObjPoint:
+        case SdrEventKind::BeginInsertGluePoint:
+            return PointerStyle::Cross;
+        case SdrEventKind::ExecuteUrl:
+            return PointerStyle::RefHand;
+        case SdrEventKind::BeginMacroObj:
+        {
+            SdrObjMacroHitRec aHitRec;
+            aHitRec.aPos=aVEvt.aLogicPos;
+            aHitRec.nTol=mnHitTolLog;
+            aHitRec.pVisiLayer=&aVEvt.pPV->GetVisibleLayers();
+            aHitRec.pPageView=aVEvt.pPV;
+            return aVEvt.pObj->GetMacroPointer(aHitRec);
+        }
+        default: break;
+    } // switch
+
+    switch(eHit)
+    {
+        case SdrHitKind::Cell:
+            return PointerStyle::Arrow;
+        case SdrHitKind::HelpLine :
+            return aVEvt.pPV->GetHelpLines()[aVEvt.nHlplIdx].GetPointer();
+        case SdrHitKind::Gluepoint:
+            return PointerStyle::MovePoint;
+        case SdrHitKind::TextEdit :
+        case SdrHitKind::TextEditObj:
+        {
+            SdrTextObj* pText = dynamic_cast< SdrTextObj* >( aVEvt.pObj );
+            if(pText && pText->HasText())
+            {
+                OutlinerParaObject* pParaObj = pText->GetOutlinerParaObject();
+                if(pParaObj && pParaObj->IsVertical())
+                    return PointerStyle::TextVertical;
+            }
+            return PointerStyle::Text;
+        }
+        default: break;
+    }
+
+    bool bMarkHit=eHit==SdrHitKind::MarkedObject;
+    SdrHdl* pHdl=aVEvt.pHdl;
+    // now check the pointers for dragging
+    if (pHdl!=nullptr || bMarkHit) {
+        SdrHdlKind eHdl= pHdl!=nullptr ? pHdl->GetKind() : SdrHdlKind::Move;
+        bool bCorner=pHdl!=nullptr && pHdl->IsCornerHdl();
+        bool bVertex=pHdl!=nullptr && pHdl->IsVertexHdl();
+        bool bMov=eHdl==SdrHdlKind::Move;
+        if (bMov && (meDragMode==SdrDragMode::Move || meDragMode==SdrDragMode::Resize || mbMarkedHitMovesAlways)) {
+            if (!IsMoveAllowed()) return PointerStyle::Arrow; // because double click or drag & drop is possible
+            return PointerStyle::Move;
+        }
+        switch (meDragMode) {
+            case SdrDragMode::Rotate: {
+                if ((bCorner || bMov) && !IsRotateAllowed(true))
+                    return PointerStyle::NotAllowed;
+
+                // are 3D objects selected?
+                bool b3DObjSelected = false;
+                for (size_t a=0; !b3DObjSelected && a<GetMarkedObjectCount(); ++a) {
+                    SdrObject* pObj = GetMarkedObjectByIndex(a);
+                    if(dynamic_cast<const E3dObject* >(pObj) !=  nullptr)
+                        b3DObjSelected = true;
+                }
+                // If we have a 3D object, go on despite !IsShearAllowed,
+                // because then we have a rotation instead of a shear.
+                if (bVertex && !IsShearAllowed() && !b3DObjSelected)
+                    return PointerStyle::NotAllowed;
+                if (bMov)
+                    return PointerStyle::Rotate;
+            } break;
+            case SdrDragMode::Shear: {
+                if (bCorner) {
+                    if (!IsDistortAllowed(true) && !IsDistortAllowed()) return PointerStyle::NotAllowed;
+                    else return PointerStyle::RefHand;
+                }
+                if (bVertex && !IsShearAllowed()) return PointerStyle::NotAllowed;
+                if (bMov) {
+                    if (!IsMoveAllowed()) return PointerStyle::Arrow; // because double click or drag & drop is possible
+                    return PointerStyle::Move;
+                }
+            } break;
+            case SdrDragMode::Mirror: {
+                if (bCorner || bVertex || bMov) {
+                    SdrHdl* pH1=maHdlList.GetHdl(SdrHdlKind::Ref1);
+                    SdrHdl* pH2=maHdlList.GetHdl(SdrHdlKind::Ref2);
+                    bool b90=false;
+                    bool b45=false;
+                    Point aDif;
+                    if (pH1!=nullptr && pH2!=nullptr) {
+                        aDif=pH2->GetPos()-pH1->GetPos();
+                        b90=(aDif.X()==0) || aDif.Y()==0;
+                        b45=b90 || (std::abs(aDif.X())==std::abs(aDif.Y()));
+                    }
+                    bool bNo=false;
+                    if (!IsMirrorAllowed(true,true)) bNo=true; // any mirroring is forbidden
+                    if (!IsMirrorAllowed() && !b45) bNo=true; // mirroring freely is forbidden
+                    if (!IsMirrorAllowed(true) && !b90) bNo=true;  // mirroring horizontally/vertically is allowed
+                    if (bNo) return PointerStyle::NotAllowed;
+                    if (b90) {
+                        return PointerStyle::Mirror;
+                    }
+                    return PointerStyle::Mirror;
+                }
+            } break;
+
+            case SdrDragMode::Transparence:
+            {
+                if(!IsTransparenceAllowed())
+                    return PointerStyle::NotAllowed;
+
+                return PointerStyle::RefHand;
+            }
+
+            case SdrDragMode::Gradient:
+            {
+                if(!IsGradientAllowed())
+                    return PointerStyle::NotAllowed;
+
+                return PointerStyle::RefHand;
+            }
+
+            case SdrDragMode::Crook: {
+                if (bCorner || bVertex || bMov) {
+                    if (!IsCrookAllowed(true) && !IsCrookAllowed()) return PointerStyle::NotAllowed;
+                    return PointerStyle::Crook;
+                }
+                break;
+            }
+
+            case SdrDragMode::Crop:
+            {
+                return PointerStyle::Crop;
+            }
+
+            default: {
+                if ((bCorner || bVertex) && !IsResizeAllowed(true)) return PointerStyle::NotAllowed;
+            }
+        }
+        if (pHdl!=nullptr) return pHdl->GetPointer();
+        if (bMov) {
+            if (!IsMoveAllowed()) return PointerStyle::Arrow; // because double click or drag & drop is possible
+            return PointerStyle::Move;
+        }
+    }
+    if (meEditMode==SdrViewEditMode::Create) return aCurrentCreatePointer;
+    return PointerStyle::Arrow;
+}
+
+#define STR_NOTHING "nothing"
+OUString SdrView::GetStatusText()
+{
+    OUString aName;
+    OUString aStr = STR_NOTHING;
+
+    if (pCurrentCreate!=nullptr)
+    {
+        aStr=pCurrentCreate->getSpecialDragComment(maDragStat);
+
+        if(aStr.isEmpty())
+        {
+            aName = pCurrentCreate->TakeObjNameSingul();
+            aStr = SvxResId(STR_ViewCreateObj);
+        }
+    }
+    else if (mpCurrentSdrDragMethod)
+    {
+        if (mbInsPolyPoint || IsInsertGluePoint())
+        {
+            aStr=maInsPointUndoStr;
+        }
+        else
+        {
+            if (maDragStat.IsMinMoved())
+            {
+                SAL_INFO(
+                    "svx.svdraw",
+                    "(" << this << ") " << mpCurrentSdrDragMethod.get());
+                aStr = mpCurrentSdrDragMethod->GetSdrDragComment();
+            }
+        }
+    }
+    else if(IsMarkObj())
+    {
+        if(AreObjectsMarked())
+        {
+            aStr = SvxResId(STR_ViewMarkMoreObjs);
+        }
+        else
+        {
+            aStr = SvxResId(STR_ViewMarkObjs);
+        }
+    }
+    else if(IsMarkPoints())
+    {
+        if(HasMarkedPoints())
+        {
+            aStr = SvxResId(STR_ViewMarkMorePoints);
+        }
+        else
+        {
+            aStr = SvxResId(STR_ViewMarkPoints);
+        }
+    } else if (IsMarkGluePoints())
+    {
+        if(HasMarkedGluePoints())
+        {
+            aStr = SvxResId(STR_ViewMarkMoreGluePoints);
+        }
+        else
+        {
+            aStr = SvxResId(STR_ViewMarkGluePoints);
+        }
+    }
+    else if (IsTextEdit() && pTextEditOutlinerView!=nullptr) {
+        aStr=SvxResId(STR_ViewTextEdit); // "TextEdit - Row y, Column x";
+        ESelection aSel(pTextEditOutlinerView->GetSelection());
+        long nPar=aSel.nEndPara,nLin=0,nCol=aSel.nEndPos;
+        if (aSel.nEndPara>0) {
+            for (sal_Int32 nParaNum=0; nParaNum<aSel.nEndPara; nParaNum++) {
+                nLin+=pTextEditOutliner->GetLineCount(nParaNum);
+            }
+        }
+        // A little imperfection:
+        // At the end of a line of any multi-line paragraph, we display the
+        // position of the next line of the same paragraph, if there is one.
+        sal_uInt16 nParaLine = 0;
+        sal_uLong nParaLineCount = pTextEditOutliner->GetLineCount(aSel.nEndPara);
+        bool bBrk = false;
+        while (!bBrk)
+        {
+            sal_uInt16 nLen = pTextEditOutliner->GetLineLen(aSel.nEndPara, nParaLine);
+            bool bLastLine = (nParaLine == nParaLineCount - 1);
+            if (nCol>nLen || (!bLastLine && nCol == nLen))
+            {
+                nCol -= nLen;
+                nLin++;
+                nParaLine++;
+            }
+            else
+                bBrk = true;
+
+            if (nLen == 0)
+                bBrk = true; // to be sure
+        }
+
+        aStr = aStr.replaceFirst("%1", OUString::number(nPar + 1));
+        aStr = aStr.replaceFirst("%2", OUString::number(nLin + 1));
+        aStr = aStr.replaceFirst("%3", OUString::number(nCol + 1));
+
+#ifdef DBG_UTIL
+        aStr +=  ", Level " + OUString::number( pTextEditOutliner->GetDepth( aSel.nEndPara ) );
+#endif
+    }
+
+    if(aStr == STR_NOTHING)
+    {
+        if (AreObjectsMarked()) {
+            aStr = ImpGetDescriptionString(STR_ViewMarked);
+            if (IsGluePointEditMode()) {
+                if (HasMarkedGluePoints()) {
+                    aStr = ImpGetDescriptionString(STR_ViewMarked, ImpGetDescriptionOptions::GLUEPOINTS);
+                }
+            } else {
+                if (HasMarkedPoints()) {
+                    aStr = ImpGetDescriptionString(STR_ViewMarked, ImpGetDescriptionOptions::POINTS);
+                }
+            }
+        } else {
+            aStr.clear();
+        }
+    }
+    else if(!aName.isEmpty())
+    {
+        aStr = aStr.replaceFirst("%1", aName);
+    }
+
+    if(!aStr.isEmpty())
+    {
+        // capitalize first letter
+        aStr = aStr.replaceAt(0, 1, OUString(aStr[0]).toAsciiUpperCase());
+    }
+    return aStr;
+}
+
+SdrViewContext SdrView::GetContext() const
+{
+    if( IsGluePointEditMode() )
+        return SdrViewContext::GluePointEdit;
+
+    const size_t nMarkCount = GetMarkedObjectCount();
+
+    if( HasMarkablePoints() && !IsFrameHandles() )
+    {
+        bool bPath=true;
+        for( size_t nMarkNum = 0; nMarkNum < nMarkCount && bPath; ++nMarkNum )
+            if (dynamic_cast<const SdrPathObj*>(GetMarkedObjectByIndex(nMarkNum)) == nullptr)
+                bPath=false;
+
+        if( bPath )
+            return SdrViewContext::PointEdit;
+    }
+
+    if( GetMarkedObjectCount() )
+    {
+        bool bGraf = true, bMedia = true, bTable = true;
+
+        for( size_t nMarkNum = 0; nMarkNum < nMarkCount && ( bGraf || bMedia ); ++nMarkNum )
+        {
+            const SdrObject* pMarkObj = GetMarkedObjectByIndex( nMarkNum );
+            DBG_ASSERT( pMarkObj, "SdrView::GetContext(), null pointer in mark list!" );
+
+            if( !pMarkObj )
+                continue;
+
+            if( dynamic_cast<const SdrGrafObj*>( pMarkObj) ==  nullptr )
+                bGraf = false;
+
+            if( dynamic_cast<const SdrMediaObj*>( pMarkObj) ==  nullptr )
+                bMedia = false;
+
+            if( dynamic_cast<const sdr::table::SdrTableObj* >( pMarkObj ) ==  nullptr )
+                bTable = false;
+        }
+
+        if( bGraf )
+            return SdrViewContext::Graphic;
+        else if( bMedia )
+            return SdrViewContext::Media;
+        else if( bTable )
+            return SdrViewContext::Table;
+    }
+
+    return SdrViewContext::Standard;
+}
+
+void SdrView::MarkAll()
+{
+    if (IsTextEdit()) {
+        GetTextEditOutlinerView()->SetSelection(ESelection(0,0,EE_PARA_ALL,EE_TEXTPOS_ALL));
+    } else if (IsGluePointEditMode()) MarkAllGluePoints();
+    else if (HasMarkablePoints()) MarkAllPoints();
+    else MarkAllObj();
+}
+
+void SdrView::UnmarkAll()
+{
+    if (IsTextEdit()) {
+        ESelection eSel=GetTextEditOutlinerView()->GetSelection();
+        eSel.nStartPara=eSel.nEndPara;
+        eSel.nStartPos=eSel.nEndPos;
+        GetTextEditOutlinerView()->SetSelection(eSel);
+    } else if (HasMarkedGluePoints()) UnmarkAllGluePoints();
+    else if (HasMarkedPoints()) UnmarkAllPoints(); // Marked, not Markable!
+    else UnmarkAllObj();
+}
+
+const tools::Rectangle& SdrView::GetMarkedRect() const
+{
+    if (IsGluePointEditMode() && HasMarkedGluePoints()) {
+        return GetMarkedGluePointsRect();
+    }
+    if (HasMarkedPoints()) {
+        return GetMarkedPointsRect();
+    }
+    return GetMarkedObjRect();
+}
+
+void SdrView::DeleteMarked()
+{
+    if (IsTextEdit())
+    {
+        SdrObjEditView::KeyInput(KeyEvent(0,vcl::KeyCode(KeyFuncType::DELETE)),pTextEditWin);
+    }
+    else
+    {
+        if( mxSelectionController.is() && mxSelectionController->DeleteMarked() )
+        {
+            // action already performed by current selection controller, do nothing
+        }
+        else if (IsGluePointEditMode() && HasMarkedGluePoints())
+        {
+            DeleteMarkedGluePoints();
+        }
+        else if (GetContext()==SdrViewContext::PointEdit && HasMarkedPoints())
+        {
+            DeleteMarkedPoints();
+        }
+        else
+        {
+            DeleteMarkedObj();
+        }
+    }
+}
+
+bool SdrView::BegMark(const Point& rPnt, bool bAddMark, bool bUnmark)
+{
+    if (bUnmark) bAddMark=true;
+    if (IsGluePointEditMode()) {
+        if (!bAddMark) UnmarkAllGluePoints();
+        return BegMarkGluePoints(rPnt,bUnmark);
+    } else if (HasMarkablePoints()) {
+        if (!bAddMark) UnmarkAllPoints();
+        return BegMarkPoints(rPnt,bUnmark);
+    } else {
+        if (!bAddMark) UnmarkAllObj();
+        BegMarkObj(rPnt,bUnmark);
+        return true;
+    }
+}
+
+void SdrView::ConfigurationChanged( ::utl::ConfigurationBroadcaster*p, ConfigurationHints nHint)
+{
+    onAccessibilityOptionsChanged();
+    SdrCreateView::ConfigurationChanged(p, nHint);
+}
+
+
+/** method is called whenever the global SvtAccessibilityOptions is changed */
+void SdrView::onAccessibilityOptionsChanged()
+{
+}
+
+void SdrView::SetMasterPagePaintCaching(bool bOn)
+{
+    if(mbMasterPagePaintCaching != bOn)
+    {
+        mbMasterPagePaintCaching = bOn;
+
+        // reset at all SdrPageWindows
+        SdrPageView* pPageView = GetSdrPageView();
+
+        if(pPageView)
+        {
+            for(sal_uInt32 b(0); b < pPageView->PageWindowCount(); b++)
+            {
+                SdrPageWindow* pPageWindow = pPageView->GetPageWindow(b);
+                assert(pPageWindow && "SdrView::SetMasterPagePaintCaching: Corrupt SdrPageWindow list (!)");
+
+                // force deletion of ObjectContact, so at re-display all VOCs
+                // will be re-created with updated flag setting
+                pPageWindow->ResetObjectContact();
+            }
+
+            // force redraw of this view
+            pPageView->InvalidateAllWin();
+        }
+    }
+}
+
+// Default ObjectContact is ObjectContactOfPageView
+sdr::contact::ObjectContact* SdrView::createViewSpecificObjectContact(
+    SdrPageWindow& rPageWindow,
+    const char* pDebugName) const
+{
+    return new sdr::contact::ObjectContactOfPageView(rPageWindow, pDebugName);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdviter.cxx b/svx/source/svdraw/svdviter.cxx
new file mode 100644
index 000000000..8c4c2c970
--- /dev/null
+++ b/svx/source/svdraw/svdviter.cxx
@@ -0,0 +1,171 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdviter.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdview.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdsob.hxx>
+
+
+void SdrViewIter::ImpInitVars()
+{
+    mnListenerNum = 0;
+    mpCurrentView = nullptr;
+}
+
+
+SdrViewIter::SdrViewIter(const SdrPage* pPage)
+{
+    mpPage = pPage;
+    mpModel = pPage ? &pPage->getSdrModelFromSdrPage() : nullptr;
+    mpObject = nullptr;
+    ImpInitVars();
+}
+
+
+SdrViewIter::SdrViewIter(const SdrObject* pObject)
+{
+    mpObject = pObject;
+    mpModel = pObject ? &pObject->getSdrModelFromSdrObject() : nullptr;
+    mpPage = pObject ? pObject->getSdrPageFromSdrObject() : nullptr;
+
+    if(!mpModel || !mpPage)
+    {
+        mpModel = nullptr;
+        mpPage = nullptr;
+    }
+
+    ImpInitVars();
+}
+
+
+bool SdrViewIter::ImpCheckPageView(SdrPageView const * pPV) const
+{
+    if(!mpPage)
+        return true;
+
+    bool bMaster(mpPage->IsMasterPage());
+    SdrPage* pPg = pPV->GetPage();
+
+    if(pPg == mpPage)
+    {
+        if(mpObject)
+        {
+            // Looking for an object? First, determine if it visible in
+            // this PageView.
+            SdrLayerIDSet aObjLay;
+            mpObject->getMergedHierarchySdrLayerIDSet(aObjLay);
+            aObjLay &= pPV->GetVisibleLayers();
+            return !aObjLay.IsEmpty();
+        }
+        else
+        {
+            return true;
+        }
+    }
+    else if(bMaster && (!mpObject || !mpObject->IsNotVisibleAsMaster()))
+    {
+        if(pPg->TRG_HasMasterPage())
+        {
+            SdrPage& rMasterPage = pPg->TRG_GetMasterPage();
+
+            if(&rMasterPage == mpPage)
+            {
+                // the page we're looking for is a master page in this PageView
+                if(mpObject)
+                {
+                    // Looking for an object? First, determine if it visible in
+                    // this PageView.
+                    SdrLayerIDSet aObjLay;
+                    mpObject->getMergedHierarchySdrLayerIDSet(aObjLay);
+                    aObjLay &= pPV->GetVisibleLayers();
+                    aObjLay &= pPg->TRG_GetMasterPageVisibleLayers();
+
+                    if(!aObjLay.IsEmpty())
+                    {
+                        return true;
+                    } // else, look at the next master page of this page...
+                }
+                else
+                {
+                    return true;
+                }
+            }
+        }
+    }
+
+    // master page forbidden or no fitting master page found
+    return false;
+}
+
+SdrView* SdrViewIter::ImpFindView()
+{
+    if(mpModel)
+    {
+        const size_t nLsCnt(mpModel->GetSizeOfVector());
+
+        while(mnListenerNum < nLsCnt)
+        {
+            SfxListener* pLs = mpModel->GetListener(mnListenerNum);
+            mpCurrentView = dynamic_cast<SdrView*>( pLs );
+
+            if(mpCurrentView)
+            {
+                if(mpPage)
+                {
+                    SdrPageView* pPV = mpCurrentView->GetSdrPageView();
+
+                    if(pPV && ImpCheckPageView(pPV))
+                    {
+                        return mpCurrentView;
+                    }
+                }
+                else
+                {
+                    return mpCurrentView;
+                }
+            }
+
+            mnListenerNum++;
+        }
+    }
+
+    mpCurrentView = nullptr;
+    return mpCurrentView;
+}
+
+
+SdrView* SdrViewIter::FirstView()
+{
+    ImpInitVars();
+    return ImpFindView();
+}
+
+
+SdrView* SdrViewIter::NextView()
+{
+    mnListenerNum++;
+    return ImpFindView();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/svdxcgv.cxx b/svx/source/svdraw/svdxcgv.cxx
new file mode 100644
index 000000000..e8c8a3218
--- /dev/null
+++ b/svx/source/svdraw/svdxcgv.cxx
@@ -0,0 +1,767 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <vector>
+#include <unordered_set>
+#include <editeng/editdata.hxx>
+#include <rtl/strbuf.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/svdxcgv.hxx>
+#include <svx/svdoutl.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/svdoole2.hxx>
+#include <svx/svdorect.hxx>
+#include <svx/svdopage.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <tools/bigint.hxx>
+#include <clonelist.hxx>
+#include <vcl/virdev.hxx>
+#include <svl/style.hxx>
+#include <fmobj.hxx>
+#include <vcl/vectorgraphicdata.hxx>
+#include <drawinglayer/primitive2d/groupprimitive2d.hxx>
+#include <drawinglayer/geometry/viewinformation2d.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <sdr/contact/objectcontactofobjlistpainter.hxx>
+#include <svx/sdr/contact/displayinfo.hxx>
+#include <svx/svdotable.hxx>
+#include <sal/log.hxx>
+
+using namespace com::sun::star;
+
+SdrExchangeView::SdrExchangeView(
+    SdrModel& rSdrModel,
+    OutputDevice* pOut)
+:   SdrObjEditView(rSdrModel, pOut)
+{
+}
+
+bool SdrExchangeView::ImpLimitToWorkArea(Point& rPt) const
+{
+    bool bRet(false);
+
+    if(!maMaxWorkArea.IsEmpty())
+    {
+        if(rPt.X()<maMaxWorkArea.Left())
+        {
+            rPt.setX( maMaxWorkArea.Left() );
+            bRet = true;
+        }
+
+        if(rPt.X()>maMaxWorkArea.Right())
+        {
+            rPt.setX( maMaxWorkArea.Right() );
+            bRet = true;
+        }
+
+        if(rPt.Y()<maMaxWorkArea.Top())
+        {
+            rPt.setY( maMaxWorkArea.Top() );
+            bRet = true;
+        }
+
+        if(rPt.Y()>maMaxWorkArea.Bottom())
+        {
+            rPt.setY( maMaxWorkArea.Bottom() );
+            bRet = true;
+        }
+    }
+    return bRet;
+}
+
+void SdrExchangeView::ImpGetPasteObjList(Point& /*rPos*/, SdrObjList*& rpLst)
+{
+    if (rpLst==nullptr)
+    {
+        SdrPageView* pPV = GetSdrPageView();
+
+        if (pPV!=nullptr) {
+            rpLst=pPV->GetObjList();
+        }
+    }
+}
+
+bool SdrExchangeView::ImpGetPasteLayer(const SdrObjList* pObjList, SdrLayerID& rLayer) const
+{
+    bool bRet=false;
+    rLayer=SdrLayerID(0);
+    if (pObjList!=nullptr) {
+        const SdrPage* pPg=pObjList->getSdrPageFromSdrObjList();
+        if (pPg!=nullptr) {
+            rLayer=pPg->GetLayerAdmin().GetLayerID(maActualLayer);
+            if (rLayer==SDRLAYER_NOTFOUND) rLayer=SdrLayerID(0);
+            SdrPageView* pPV = GetSdrPageView();
+            if (pPV!=nullptr) {
+                bRet=!pPV->GetLockedLayers().IsSet(rLayer) && pPV->GetVisibleLayers().IsSet(rLayer);
+            }
+        }
+    }
+    return bRet;
+}
+
+bool SdrExchangeView::Paste(const OUString& rStr, const Point& rPos, SdrObjList* pLst, SdrInsertFlags nOptions)
+{
+    if (rStr.isEmpty())
+        return false;
+
+    Point aPos(rPos);
+    ImpGetPasteObjList(aPos,pLst);
+    ImpLimitToWorkArea( aPos );
+    if (pLst==nullptr) return false;
+    SdrLayerID nLayer;
+    if (!ImpGetPasteLayer(pLst,nLayer)) return false;
+    bool bUnmark = (nOptions & (SdrInsertFlags::DONTMARK|SdrInsertFlags::ADDMARK))==SdrInsertFlags::NONE && !IsTextEdit();
+    if (bUnmark) UnmarkAllObj();
+    tools::Rectangle aTextRect(0,0,500,500);
+    SdrPage* pPage=pLst->getSdrPageFromSdrObjList();
+    if (pPage!=nullptr) {
+        aTextRect.SetSize(pPage->GetSize());
+    }
+    SdrRectObj* pObj = new SdrRectObj(
+        getSdrModelFromSdrView(),
+        OBJ_TEXT,
+        aTextRect);
+
+    pObj->SetLayer(nLayer);
+    pObj->NbcSetText(rStr); // SetText before SetAttr, else SetAttr doesn't work!
+    if (mpDefaultStyleSheet!=nullptr) pObj->NbcSetStyleSheet(mpDefaultStyleSheet, false);
+
+    pObj->SetMergedItemSet(maDefaultAttr);
+
+    SfxItemSet aTempAttr(mpModel->GetItemPool());  // no fill, no line
+    aTempAttr.Put(XLineStyleItem(drawing::LineStyle_NONE));
+    aTempAttr.Put(XFillStyleItem(drawing::FillStyle_NONE));
+
+    pObj->SetMergedItemSet(aTempAttr);
+
+    pObj->FitFrameToTextSize();
+    Size aSiz(pObj->GetLogicRect().GetSize());
+    MapUnit eMap=mpModel->GetScaleUnit();
+    Fraction aMap=mpModel->GetScaleFraction();
+    ImpPasteObject(pObj,*pLst,aPos,aSiz,MapMode(eMap,Point(0,0),aMap,aMap),nOptions);
+    return true;
+}
+
+bool SdrExchangeView::Paste(SvStream& rInput, EETextFormat eFormat, const Point& rPos, SdrObjList* pLst, SdrInsertFlags nOptions)
+{
+    Point aPos(rPos);
+    ImpGetPasteObjList(aPos,pLst);
+    ImpLimitToWorkArea( aPos );
+    if (pLst==nullptr) return false;
+    SdrLayerID nLayer;
+    if (!ImpGetPasteLayer(pLst,nLayer)) return false;
+    bool bUnmark=(nOptions&(SdrInsertFlags::DONTMARK|SdrInsertFlags::ADDMARK))==SdrInsertFlags::NONE && !IsTextEdit();
+    if (bUnmark) UnmarkAllObj();
+    tools::Rectangle aTextRect(0,0,500,500);
+    SdrPage* pPage=pLst->getSdrPageFromSdrObjList();
+    if (pPage!=nullptr) {
+        aTextRect.SetSize(pPage->GetSize());
+    }
+    SdrRectObj* pObj = new SdrRectObj(
+        getSdrModelFromSdrView(),
+        OBJ_TEXT,
+        aTextRect);
+
+    pObj->SetLayer(nLayer);
+    if (mpDefaultStyleSheet!=nullptr) pObj->NbcSetStyleSheet(mpDefaultStyleSheet, false);
+
+    pObj->SetMergedItemSet(maDefaultAttr);
+
+    SfxItemSet aTempAttr(mpModel->GetItemPool());  // no fill, no line
+    aTempAttr.Put(XLineStyleItem(drawing::LineStyle_NONE));
+    aTempAttr.Put(XFillStyleItem(drawing::FillStyle_NONE));
+
+    pObj->SetMergedItemSet(aTempAttr);
+
+    pObj->NbcSetText(rInput,OUString(),eFormat);
+    pObj->FitFrameToTextSize();
+    Size aSiz(pObj->GetLogicRect().GetSize());
+    MapUnit eMap=mpModel->GetScaleUnit();
+    Fraction aMap=mpModel->GetScaleFraction();
+    ImpPasteObject(pObj,*pLst,aPos,aSiz,MapMode(eMap,Point(0,0),aMap,aMap),nOptions);
+
+    // b4967543
+    if(pObj->GetOutlinerParaObject())
+    {
+        SdrOutliner& rOutliner = pObj->getSdrModelFromSdrObject().GetHitTestOutliner();
+        rOutliner.SetText(*pObj->GetOutlinerParaObject());
+
+        if(1 == rOutliner.GetParagraphCount())
+        {
+            SfxStyleSheet* pCandidate = rOutliner.GetStyleSheet(0);
+
+            if(pCandidate)
+            {
+                if(pObj->getSdrModelFromSdrObject().GetStyleSheetPool() == pCandidate->GetPool())
+                {
+                    pObj->NbcSetStyleSheet(pCandidate, true);
+                }
+            }
+        }
+    }
+
+    return true;
+}
+
+bool SdrExchangeView::Paste(
+    const SdrModel& rMod, const Point& rPos, SdrObjList* pLst, SdrInsertFlags nOptions)
+{
+    const SdrModel* pSrcMod=&rMod;
+    if (pSrcMod==mpModel)
+        return false; // this can't work, right?
+
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+        BegUndo(SvxResId(STR_ExchangePaste));
+
+    if( mxSelectionController.is() && mxSelectionController->PasteObjModel( rMod ) )
+    {
+        if( bUndo )
+            EndUndo();
+        return true;
+    }
+
+    Point aPos(rPos);
+    ImpGetPasteObjList(aPos,pLst);
+    SdrPageView* pMarkPV=nullptr;
+    SdrPageView* pPV = GetSdrPageView();
+
+    if(pPV && pPV->GetObjList() == pLst )
+        pMarkPV=pPV;
+
+    ImpLimitToWorkArea( aPos );
+    if (pLst==nullptr)
+        return false;
+
+    bool bUnmark=(nOptions&(SdrInsertFlags::DONTMARK|SdrInsertFlags::ADDMARK))==SdrInsertFlags::NONE && !IsTextEdit();
+    if (bUnmark)
+        UnmarkAllObj();
+
+    // Rescale, if the Model uses a different MapUnit.
+    // Calculate the necessary factors first.
+    MapUnit eSrcUnit=pSrcMod->GetScaleUnit();
+    MapUnit eDstUnit=mpModel->GetScaleUnit();
+    bool bResize=eSrcUnit!=eDstUnit;
+    Fraction aXResize,aYResize;
+    Point aPt0;
+    if (bResize)
+    {
+        FrPair aResize(GetMapFactor(eSrcUnit,eDstUnit));
+        aXResize=aResize.X();
+        aYResize=aResize.Y();
+    }
+    SdrObjList*  pDstLst=pLst;
+    sal_uInt16 nPg,nPgCount=pSrcMod->GetPageCount();
+    for (nPg=0; nPg<nPgCount; nPg++)
+    {
+        const SdrPage* pSrcPg=pSrcMod->GetPage(nPg);
+
+        // Use SnapRect, not BoundRect here
+        tools::Rectangle aR=pSrcPg->GetAllObjSnapRect();
+
+        if (bResize)
+            ResizeRect(aR,aPt0,aXResize,aYResize);
+        Point aDist(aPos-aR.Center());
+        Size  aSiz(aDist.X(),aDist.Y());
+        size_t nCloneErrCnt = 0;
+        const size_t nObjCount = pSrcPg->GetObjCount();
+        bool bMark = pMarkPV!=nullptr && !IsTextEdit() && (nOptions&SdrInsertFlags::DONTMARK)==SdrInsertFlags::NONE;
+
+        // #i13033#
+        // New mechanism to re-create the connections of cloned connectors
+        CloneList aCloneList;
+        std::unordered_set<rtl::OUString> aNameSet;
+        for (size_t nOb=0; nOb<nObjCount; ++nOb)
+        {
+            const SdrObject* pSrcOb=pSrcPg->GetObj(nOb);
+
+            SdrObject* pNewObj(pSrcOb->CloneSdrObject(*mpModel));
+
+            if (pNewObj!=nullptr)
+            {
+                if(bResize)
+                {
+                    pNewObj->getSdrModelFromSdrObject().SetPasteResize(true);
+                    pNewObj->NbcResize(aPt0,aXResize,aYResize);
+                    pNewObj->getSdrModelFromSdrObject().SetPasteResize(false);
+                }
+
+                // #i39861#
+                pNewObj->NbcMove(aSiz);
+
+                const SdrPage* pPg = pDstLst->getSdrPageFromSdrObjList();
+
+                if(pPg)
+                {
+                    // #i72535#
+                    const SdrLayerAdmin& rAd = pPg->GetLayerAdmin();
+                    SdrLayerID nLayer(0);
+
+                    if(dynamic_cast<const FmFormObj*>( pNewObj) !=  nullptr)
+                    {
+                        // for FormControls, force to form layer
+                        nLayer = rAd.GetLayerID(rAd.GetControlLayerName());
+                    }
+                    else
+                    {
+                        nLayer = rAd.GetLayerID(maActualLayer);
+                    }
+
+                    if(SDRLAYER_NOTFOUND == nLayer)
+                    {
+                        nLayer = SdrLayerID(0);
+                    }
+
+                    pNewObj->SetLayer(nLayer);
+                }
+
+                pDstLst->InsertObjectThenMakeNameUnique(pNewObj, aNameSet);
+
+                if( bUndo )
+                    AddUndo(getSdrModelFromSdrView().GetSdrUndoFactory().CreateUndoNewObject(*pNewObj));
+
+                if (bMark) {
+                    // Don't already set Markhandles!
+                    // That is instead being done by ModelHasChanged in MarkView.
+                    MarkObj(pNewObj,pMarkPV,false,true);
+                }
+
+                // #i13033#
+                aCloneList.AddPair(pSrcOb, pNewObj);
+            }
+            else
+            {
+                nCloneErrCnt++;
+            }
+        }
+
+        // #i13033#
+        // New mechanism to re-create the connections of cloned connectors
+        aCloneList.CopyConnections();
+
+        if(0 != nCloneErrCnt)
+        {
+#ifdef DBG_UTIL
+            OStringBuffer aStr("SdrExchangeView::Paste(): Error when cloning ");
+
+            if(nCloneErrCnt == 1)
+            {
+                aStr.append("a drawing object.");
+            }
+            else
+            {
+                aStr.append(static_cast<sal_Int32>(nCloneErrCnt));
+                aStr.append(" drawing objects.");
+            }
+
+            aStr.append(" Not copying object connectors.");
+
+            OSL_FAIL(aStr.getStr());
+#endif
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+
+    return true;
+}
+
+void SdrExchangeView::ImpPasteObject(SdrObject* pObj, SdrObjList& rLst, const Point& rCenter, const Size& rSiz, const MapMode& rMap, SdrInsertFlags nOptions)
+{
+    BigInt nSizX(rSiz.Width());
+    BigInt nSizY(rSiz.Height());
+    MapUnit eSrcMU=rMap.GetMapUnit();
+    MapUnit eDstMU=mpModel->GetScaleUnit();
+    FrPair aMapFact(GetMapFactor(eSrcMU,eDstMU));
+    Fraction aDstFr(mpModel->GetScaleFraction());
+    nSizX *= double(aMapFact.X() * rMap.GetScaleX() * aDstFr);
+    nSizX *= aDstFr.GetDenominator();
+    nSizY *= double(aMapFact.Y() * rMap.GetScaleY());
+    nSizY /= aDstFr.GetNumerator();
+    long xs=nSizX;
+    long ys=nSizY;
+    Point aPos(rCenter.X()-xs/2,rCenter.Y()-ys/2);
+    tools::Rectangle aR(aPos.X(),aPos.Y(),aPos.X()+xs,aPos.Y()+ys);
+    pObj->SetLogicRect(aR);
+    rLst.InsertObject(pObj, SAL_MAX_SIZE);
+
+    if( IsUndoEnabled() )
+        AddUndo(getSdrModelFromSdrView().GetSdrUndoFactory().CreateUndoNewObject(*pObj));
+
+    SdrPageView* pMarkPV=nullptr;
+    SdrPageView* pPV = GetSdrPageView();
+
+    if(pPV && pPV->GetObjList()==&rLst)
+        pMarkPV=pPV;
+
+    bool bMark = pMarkPV!=nullptr && !IsTextEdit() && (nOptions&SdrInsertFlags::DONTMARK)==SdrInsertFlags::NONE;
+    if (bMark)
+    { // select object the first PageView we found
+        MarkObj(pObj,pMarkPV);
+    }
+}
+
+BitmapEx SdrExchangeView::GetMarkedObjBitmapEx(bool bNoVDevIfOneBmpMarked) const
+{
+    BitmapEx aBmp;
+
+    if( AreObjectsMarked() )
+    {
+        if(1 == GetMarkedObjectCount())
+        {
+            if(bNoVDevIfOneBmpMarked)
+            {
+                SdrObject*  pGrafObjTmp = GetMarkedObjectByIndex( 0 );
+                SdrGrafObj* pGrafObj = dynamic_cast<SdrGrafObj*>( pGrafObjTmp  );
+
+                if( pGrafObj && ( pGrafObj->GetGraphicType() == GraphicType::Bitmap ) )
+                {
+                    aBmp = pGrafObj->GetTransformedGraphic().GetBitmapEx();
+                }
+            }
+            else
+            {
+                const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(GetMarkedObjectByIndex(0));
+
+                if(pSdrGrafObj && pSdrGrafObj->isEmbeddedVectorGraphicData())
+                {
+                    aBmp = pSdrGrafObj->GetGraphic().getVectorGraphicData()->getReplacement();
+                }
+            }
+        }
+
+        if( !aBmp )
+        {
+            // choose conversion directly using primitives to bitmap to avoid
+            // rendering errors with tiled bitmap fills (these will be tiled in a
+            // in-between metafile, but tend to show 'gaps' since the target is *no*
+            // bitmap rendering)
+            ::std::vector< SdrObject* > aSdrObjects(GetMarkedObjects());
+            const sal_uInt32 nCount(aSdrObjects.size());
+
+            if(nCount)
+            {
+                // collect sub-primitives as group objects, thus no expensive append
+                // to existing sequence is needed
+                drawinglayer::primitive2d::Primitive2DContainer xPrimitives(nCount);
+
+                for(sal_uInt32 a(0); a < nCount; a++)
+                {
+                    SdrObject* pCandidate = aSdrObjects[a];
+                    SdrGrafObj* pSdrGrafObj = dynamic_cast< SdrGrafObj* >(pCandidate);
+
+                    if(pSdrGrafObj)
+                    {
+                        // #122753# To ensure existence of graphic content, force swap in
+                        pSdrGrafObj->ForceSwapIn();
+                    }
+
+                    xPrimitives[a] = new drawinglayer::primitive2d::GroupPrimitive2D(
+                        pCandidate->GetViewContact().getViewIndependentPrimitive2DContainer());
+                }
+
+                // get logic range
+                const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+                const basegfx::B2DRange aRange(xPrimitives.getB2DRange(aViewInformation2D));
+
+                if(!aRange.isEmpty())
+                {
+                    // if we have geometry and it has a range, convert to BitmapEx using
+                    // common tooling
+                    aBmp = convertPrimitive2DSequenceToBitmapEx(
+                        xPrimitives,
+                        aRange);
+                }
+            }
+        }
+    }
+
+    return aBmp;
+}
+
+
+GDIMetaFile SdrExchangeView::GetMarkedObjMetaFile(bool bNoVDevIfOneMtfMarked) const
+{
+    GDIMetaFile aMtf;
+
+    if( AreObjectsMarked() )
+    {
+        tools::Rectangle   aBound( GetMarkedObjBoundRect() );
+        Size        aBoundSize( aBound.GetWidth(), aBound.GetHeight() );
+        MapMode     aMap( mpModel->GetScaleUnit(), Point(), mpModel->GetScaleFraction(), mpModel->GetScaleFraction() );
+
+        if( bNoVDevIfOneMtfMarked )
+        {
+            SdrObject*  pGrafObjTmp = GetMarkedObjectByIndex( 0 );
+            SdrGrafObj* pGrafObj = ( GetMarkedObjectCount() ==1 ) ? dynamic_cast<SdrGrafObj*>( pGrafObjTmp  ) : nullptr;
+
+            if( pGrafObj )
+            {
+                Graphic aGraphic( pGrafObj->GetTransformedGraphic() );
+
+                // #119735# just use GetGDIMetaFile, it will create a buffered version of contained bitmap now automatically
+                aMtf = aGraphic.GetGDIMetaFile();
+            }
+        }
+
+        if( !aMtf.GetActionSize() )
+        {
+            ScopedVclPtrInstance< VirtualDevice > pOut;
+            const Size aDummySize(2, 2);
+
+            pOut->SetOutputSizePixel(aDummySize);
+            pOut->EnableOutput(false);
+            pOut->SetMapMode(aMap);
+            aMtf.Clear();
+            aMtf.Record(pOut);
+
+            DrawMarkedObj(*pOut);
+
+            aMtf.Stop();
+            aMtf.WindStart();
+
+            // moving the result is more reliable then setting a relative MapMode at the VDev (used
+            // before), also see #i99268# in GetObjGraphic() below. Some draw actions at
+            // the OutDev are simply not handled correctly when a MapMode is set at the
+            // target device, e.g. MetaFloatTransparentAction. Even the Move for this action
+            // was missing the manipulation of the embedded Metafile
+            aMtf.Move(-aBound.Left(), -aBound.Top());
+
+            aMtf.SetPrefMapMode( aMap );
+
+            // removed PrefSize extension. It is principally wrong to set a reduced size at
+            // the created MetaFile. The mentioned errors occur at output time since the integer
+            // MapModes from VCL lead to errors. It is now corrected in the VCLRenderer for
+            // primitives (and may later be done in breaking up a MetaFile to primitives)
+            aMtf.SetPrefSize(aBoundSize);
+        }
+    }
+
+    return aMtf;
+}
+
+
+Graphic SdrExchangeView::GetAllMarkedGraphic() const
+{
+    Graphic aRet;
+
+    if( AreObjectsMarked() )
+    {
+        if( ( 1 == GetMarkedObjectCount() ) && GetSdrMarkByIndex( 0 ) )
+            aRet = SdrExchangeView::GetObjGraphic(*GetMarkedObjectByIndex(0));
+        else
+            aRet = GetMarkedObjMetaFile();
+    }
+
+    return aRet;
+}
+
+
+Graphic SdrExchangeView::GetObjGraphic(const SdrObject& rSdrObject)
+{
+    Graphic aRet;
+
+    // try to get a graphic from the object first
+    const SdrGrafObj* pSdrGrafObj(dynamic_cast< const SdrGrafObj* >(&rSdrObject));
+    const SdrOle2Obj* pSdrOle2Obj(dynamic_cast< const SdrOle2Obj* >(&rSdrObject));
+
+    if(pSdrGrafObj)
+    {
+        if(pSdrGrafObj->isEmbeddedVectorGraphicData())
+        {
+            // get Metafile for Svg content
+            aRet = pSdrGrafObj->getMetafileFromEmbeddedVectorGraphicData();
+        }
+        else
+        {
+            // Make behaviour coherent with metafile
+            // recording below (which of course also takes
+            // view-transformed objects)
+            aRet = pSdrGrafObj->GetTransformedGraphic();
+        }
+    }
+    else if(pSdrOle2Obj)
+    {
+        if(pSdrOle2Obj->GetGraphic())
+        {
+            aRet = *pSdrOle2Obj->GetGraphic();
+        }
+    }
+
+    // if graphic could not be retrieved => go the hard way and create a MetaFile
+    if((GraphicType::NONE == aRet.GetType()) || (GraphicType::Default == aRet.GetType()))
+    {
+        ScopedVclPtrInstance< VirtualDevice > pOut;
+        GDIMetaFile aMtf;
+        const tools::Rectangle aBoundRect(rSdrObject.GetCurrentBoundRect());
+        const MapMode aMap(rSdrObject.getSdrModelFromSdrObject().GetScaleUnit(),
+            Point(),
+            rSdrObject.getSdrModelFromSdrObject().GetScaleFraction(),
+            rSdrObject.getSdrModelFromSdrObject().GetScaleFraction());
+
+        pOut->EnableOutput(false);
+        pOut->SetMapMode(aMap);
+        aMtf.Record(pOut);
+        rSdrObject.SingleObjectPainter(*pOut);
+        aMtf.Stop();
+        aMtf.WindStart();
+
+        // #i99268# replace the original offset from using XOutDev's SetOffset
+        // NOT (as tried with #i92760#) with another MapMode which gets recorded
+        // by the Metafile itself (what always leads to problems), but by
+        // moving the result directly
+        aMtf.Move(-aBoundRect.Left(), -aBoundRect.Top());
+        aMtf.SetPrefMapMode(aMap);
+        aMtf.SetPrefSize(aBoundRect.GetSize());
+
+        if(aMtf.GetActionSize())
+        {
+            aRet = aMtf;
+        }
+    }
+
+    return aRet;
+}
+
+
+::std::vector< SdrObject* > SdrExchangeView::GetMarkedObjects() const
+{
+    SortMarkedObjects();
+    ::std::vector< SdrObject* > aRetval;
+
+    ::std::vector< ::std::vector< SdrMark* > >  aObjVectors( 2 );
+    ::std::vector< SdrMark* >&                  rObjVector1 = aObjVectors[ 0 ];
+    ::std::vector< SdrMark* >&                  rObjVector2 = aObjVectors[ 1 ];
+    const SdrLayerAdmin&                        rLayerAdmin = mpModel->GetLayerAdmin();
+    const SdrLayerID                            nControlLayerId = rLayerAdmin.GetLayerID( rLayerAdmin.GetControlLayerName() );
+
+    for( size_t n = 0, nCount = GetMarkedObjectCount(); n < nCount; ++n )
+    {
+        SdrMark* pMark = GetSdrMarkByIndex( n );
+
+        // paint objects on control layer on top of all other objects
+        if( nControlLayerId == pMark->GetMarkedSdrObj()->GetLayer() )
+            rObjVector2.push_back( pMark );
+        else
+            rObjVector1.push_back( pMark );
+    }
+
+    for(const std::vector<SdrMark*> & rObjVector : aObjVectors)
+    {
+        for(SdrMark* pMark : rObjVector)
+        {
+            aRetval.push_back(pMark->GetMarkedSdrObj());
+        }
+    }
+
+    return aRetval;
+}
+
+
+void SdrExchangeView::DrawMarkedObj(OutputDevice& rOut) const
+{
+    ::std::vector< SdrObject* > aSdrObjects(GetMarkedObjects());
+
+    if(!aSdrObjects.empty())
+    {
+        sdr::contact::ObjectContactOfObjListPainter aPainter(rOut, aSdrObjects, aSdrObjects[0]->getSdrPageFromSdrObject());
+        sdr::contact::DisplayInfo aDisplayInfo;
+
+        // do processing
+        aPainter.ProcessDisplay(aDisplayInfo);
+    }
+}
+
+std::unique_ptr<SdrModel> SdrExchangeView::CreateMarkedObjModel() const
+{
+    // Sorting the MarkList here might be problematic in the future, so
+    // use a copy.
+    SortMarkedObjects();
+    std::unique_ptr<SdrModel> pNewModel(mpModel->AllocModel());
+    SdrPage* pNewPage(pNewModel->AllocPage(false));
+    pNewModel->InsertPage(pNewPage);
+    ::std::vector< SdrObject* > aSdrObjects(GetMarkedObjects());
+
+    // #i13033#
+    // New mechanism to re-create the connections of cloned connectors
+    CloneList aCloneList;
+
+    for(SdrObject* pObj : aSdrObjects)
+    {
+        SdrObject* pNewObj(nullptr);
+
+        if(nullptr != dynamic_cast< const SdrPageObj* >(pObj))
+        {
+            // convert SdrPageObj's to a graphic representation, because
+            // virtual connection to referenced page gets lost in new model
+            pNewObj = new SdrGrafObj(
+                *pNewModel,
+                GetObjGraphic(*pObj),
+                pObj->GetLogicRect());
+        }
+        else if(nullptr != dynamic_cast< const sdr::table::SdrTableObj* >(pObj))
+        {
+            // check if we have a valid selection *different* from whole table
+            // being selected
+            if(mxSelectionController.is())
+            {
+                pNewObj = mxSelectionController->GetMarkedSdrObjClone(*pNewModel);
+            }
+        }
+
+        if(nullptr == pNewObj)
+        {
+            // not cloned yet
+            if(pObj->GetObjIdentifier() == OBJ_OLE2 && nullptr == mpModel->GetPersist())
+            {
+                // tdf#125520 - former fix was wrong, the SdrModel
+                // has to have a GetPersist() already, see task.
+                // We can still warn here when this is not the case
+                SAL_WARN( "svx", "OLE gets cloned Persist, EmbeddedObjectContainer will not be copied" );
+            }
+
+            // use default way
+            pNewObj = pObj->CloneSdrObject(*pNewModel);
+        }
+
+        if(pNewObj)
+        {
+            pNewPage->InsertObject(pNewObj, SAL_MAX_SIZE);
+
+            // #i13033#
+            aCloneList.AddPair(pObj, pNewObj);
+        }
+    }
+
+    // #i13033#
+    // New mechanism to re-create the connections of cloned connectors
+    aCloneList.CopyConnections();
+
+    return pNewModel;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/textchain.cxx b/svx/source/svdraw/textchain.cxx
new file mode 100644
index 000000000..32c1f9b4e
--- /dev/null
+++ b/svx/source/svdraw/textchain.cxx
@@ -0,0 +1,128 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <textchain.hxx>
+#include <svx/svdotext.hxx>
+
+/*
+ * Definition of Properties Interface
+*/
+
+CursorChainingEvent const & TextChain::GetCursorEvent(const SdrTextObj *pTarget)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    return pLinkProperties->aCursorEvent;
+}
+void TextChain::SetCursorEvent(const SdrTextObj *pTarget, CursorChainingEvent const & rPropParam)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    pLinkProperties->aCursorEvent = rPropParam;
+}
+
+bool TextChain::GetNilChainingEvent(const SdrTextObj *pTarget)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    return pLinkProperties->aNilChainingEvent;
+}
+void TextChain::SetNilChainingEvent(const SdrTextObj *pTarget, bool b)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    pLinkProperties->aNilChainingEvent = b;
+}
+
+ESelection const & TextChain::GetPreChainingSel(const SdrTextObj *pTarget)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    return pLinkProperties->aPreChainingSel;
+}
+void TextChain::SetPreChainingSel(const SdrTextObj *pTarget, ESelection const & rPropParam)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    pLinkProperties->aPreChainingSel = rPropParam;
+}
+
+ESelection const & TextChain::GetPostChainingSel(const SdrTextObj *pTarget)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    return pLinkProperties->aPostChainingSel;
+}
+void TextChain::SetPostChainingSel(const SdrTextObj *pTarget, ESelection const & rPropParam)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    pLinkProperties->aPostChainingSel = rPropParam;
+}
+
+bool TextChain::GetIsPartOfLastParaInNextLink(const SdrTextObj *pTarget)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    return pLinkProperties->aIsPartOfLastParaInNextLink;
+}
+void TextChain::SetIsPartOfLastParaInNextLink(const SdrTextObj *pTarget, bool b)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    pLinkProperties->aIsPartOfLastParaInNextLink = b;
+}
+
+bool TextChain::GetSwitchingToNextBox(const SdrTextObj *pTarget)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    return pLinkProperties->aSwitchingToNextBox;
+}
+void TextChain::SetSwitchingToNextBox(const SdrTextObj *pTarget, bool b)
+{
+    ImpChainLinkProperties *pLinkProperties = GetLinkProperties(pTarget);
+    pLinkProperties->aSwitchingToNextBox = b;
+}
+
+/* End Definition of Properties Interface */
+
+/* TextChain */
+
+// NOTE: All getters in the class assume that the guy is in the chain
+
+TextChain::TextChain()
+{
+}
+
+TextChain::~TextChain()
+{
+    // XXX: Should free all LinkProperties
+}
+
+namespace {
+
+ChainLinkId GetId(const SdrTextObj *pLink)
+{
+    return pLink->GetName();
+}
+
+}
+
+ImpChainLinkProperties *TextChain::GetLinkProperties(const SdrTextObj *pLink)
+{
+    // if the guy does not already have properties in the map make them
+    ChainLinkId aLinkId = GetId(pLink);
+    if (maLinkPropertiesMap.find(aLinkId) == maLinkPropertiesMap.end()) {
+        maLinkPropertiesMap[aLinkId] = new ImpChainLinkProperties;
+    }
+
+    return maLinkPropertiesMap[aLinkId];
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/textchaincursor.cxx b/svx/source/svdraw/textchaincursor.cxx
new file mode 100644
index 000000000..51c4d1d8e
--- /dev/null
+++ b/svx/source/svdraw/textchaincursor.cxx
@@ -0,0 +1,203 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <textchain.hxx>
+#include <textchaincursor.hxx>
+#include <svx/svdedxv.hxx>
+#include <svx/svdoutl.hxx>
+#include <vcl/event.hxx>
+
+// XXX: Possible duplication of code in behavior with stuff in ImpEditView (or ImpEditEngine) and OutlinerView
+
+// XXX: We violate Demeter's Law several times here, I'm afraid
+
+TextChainCursorManager::TextChainCursorManager(SdrObjEditView *pEditView, const SdrTextObj *pTextObj) :
+    mpEditView(pEditView),
+    mpTextObj(pTextObj),
+    mbHandlingDel(false)
+{
+    assert(mpEditView);
+    assert(mpTextObj);
+
+}
+
+bool TextChainCursorManager::HandleKeyEvent( const KeyEvent& rKEvt )
+{
+    ESelection aNewSel;
+    CursorChainingEvent aCursorEvent;
+
+    // check what the cursor/event situation looks like
+    bool bCompletelyHandled = false;
+    impDetectEvent(rKEvt, aCursorEvent, aNewSel, bCompletelyHandled);
+
+    if (aCursorEvent == CursorChainingEvent::NULL_EVENT)
+        return false;
+    else {
+        HandleCursorEvent(aCursorEvent, aNewSel);
+        // return value depends on the situation we are in
+        return bCompletelyHandled;
+    }
+}
+
+void TextChainCursorManager::impDetectEvent(const KeyEvent& rKEvt,
+                                            CursorChainingEvent& rOutCursorEvt,
+                                            ESelection& rOutSel,
+                                            bool& rOutHandled)
+{
+    SdrOutliner *pOutl = mpEditView->GetTextEditOutliner();
+    OutlinerView *pOLV = mpEditView->GetTextEditOutlinerView();
+
+    SdrTextObj *pNextLink = mpTextObj->GetNextLinkInChain();
+    SdrTextObj *pPrevLink = mpTextObj->GetPrevLinkInChain();
+
+    KeyFuncType eFunc = rKEvt.GetKeyCode().GetFunction();
+
+    // We need to have this KeyFuncType
+    if (eFunc !=  KeyFuncType::DONTKNOW && eFunc != KeyFuncType::DELETE)
+    {
+        rOutCursorEvt = CursorChainingEvent::NULL_EVENT;
+        return;
+    }
+
+    sal_uInt16 nCode = rKEvt.GetKeyCode().GetCode();
+    ESelection aCurSel = pOLV->GetSelection();
+
+    ESelection aEndSelPrevBox(100000, 100000);
+
+    sal_Int32 nLastPara = pOutl->GetParagraphCount()-1;
+    OUString aLastParaText = pOutl->GetText(pOutl->GetParagraph(nLastPara));
+    sal_Int32 nLastParaLen = aLastParaText.getLength();
+
+    ESelection aEndSel(nLastPara, nLastParaLen);
+    bool bAtEndOfTextContent = aCurSel == aEndSel;
+
+    // Possibility: Are we "pushing" at the end of the object?
+    if (nCode == KEY_RIGHT && bAtEndOfTextContent && pNextLink)
+    {
+        rOutCursorEvt = CursorChainingEvent::TO_NEXT_LINK;
+        // Selection unchanged: we are at the beginning of the box
+        rOutHandled = true; // Nothing more to do than move cursor
+        return;
+    }
+
+    // Possibility: Are we "pushing" at the end of the object?
+    if (eFunc == KeyFuncType::DELETE && bAtEndOfTextContent && pNextLink)
+    {
+        rOutCursorEvt = CursorChainingEvent::TO_NEXT_LINK;
+        // Selection unchanged: we are at the beginning of the box
+        rOutHandled = false; // We still need to delete the characters
+        mbHandlingDel = true;
+        return;
+    }
+
+    ESelection aStartSel(0, 0);
+    bool bAtStartOfTextContent = aCurSel == aStartSel;
+
+    // Possibility: Are we "pushing" at the start of the object?
+    if (nCode == KEY_LEFT && bAtStartOfTextContent && pPrevLink)
+    {
+        rOutCursorEvt = CursorChainingEvent::TO_PREV_LINK;
+        rOutSel = aEndSelPrevBox; // Set at end of selection
+        rOutHandled = true; // Nothing more to do than move cursor
+        return;
+    }
+
+    // Possibility: Are we "pushing" at the start of the object and deleting left?
+    if (nCode == KEY_BACKSPACE && bAtStartOfTextContent && pPrevLink)
+    {
+        rOutCursorEvt = CursorChainingEvent::TO_PREV_LINK;
+        rOutSel = aEndSelPrevBox; // Set at end of selection
+        rOutHandled = false; // We need to delete characters after moving cursor
+        return;
+    }
+
+    // If arrived here there is no event detected
+    rOutCursorEvt = CursorChainingEvent::NULL_EVENT;
+
+}
+
+void TextChainCursorManager::HandleCursorEventAfterChaining(
+                            const CursorChainingEvent aCurEvt,
+                            const ESelection& aNewSel)
+
+{
+     // Special case for DELETE handling: we need to get back at the end of the prev box
+    if (mbHandlingDel) {
+        // reset flag
+        mbHandlingDel = false;
+
+        // Move to end of prev box
+        SdrTextObj *pPrevLink = mpTextObj->GetPrevLinkInChain();
+        ESelection aEndSel(100000, 100000);
+        impChangeEditingTextObj(pPrevLink, aEndSel);
+        return;
+    }
+
+    // Standard handling
+    HandleCursorEvent(aCurEvt, aNewSel);
+}
+
+
+void TextChainCursorManager::HandleCursorEvent(
+                            const CursorChainingEvent aCurEvt,
+                            const ESelection& aNewSel)
+
+{
+
+    OutlinerView* pOLV = mpEditView->GetTextEditOutlinerView();
+    SdrTextObj *pNextLink = mpTextObj->GetNextLinkInChain();
+    SdrTextObj *pPrevLink = mpTextObj->GetPrevLinkInChain();
+
+
+    switch ( aCurEvt ) {
+            case CursorChainingEvent::UNCHANGED:
+                // Set same selection as before the chaining (which is saved as PostChainingSel)
+                // We need an explicit set because the Outliner is messed up
+                //    after text transfer and otherwise it brings us at arbitrary positions.
+                pOLV->SetSelection(aNewSel);
+                break;
+            case CursorChainingEvent::TO_NEXT_LINK:
+                mpTextObj->GetTextChain()->SetSwitchingToNextBox(mpTextObj, true);
+                impChangeEditingTextObj(pNextLink, aNewSel);
+                break;
+            case CursorChainingEvent::TO_PREV_LINK:
+                impChangeEditingTextObj(pPrevLink, aNewSel);
+                break;
+            case CursorChainingEvent::NULL_EVENT:
+                // Do nothing here
+                break;
+    }
+
+}
+
+void TextChainCursorManager::impChangeEditingTextObj(SdrTextObj *pTargetTextObj, ESelection aNewSel)
+{
+    assert(pTargetTextObj);
+
+    mpEditView->SdrEndTextEdit();
+    mpEditView->SdrBeginTextEdit(pTargetTextObj);
+    // OutlinerView has changed, so we update the pointer
+    OutlinerView *pOLV = mpEditView->GetTextEditOutlinerView();
+    pOLV->SetSelection(aNewSel);
+
+    // Update reference text obj
+    mpTextObj = pTargetTextObj;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/svdraw/textchainflow.cxx b/svx/source/svdraw/textchainflow.cxx
new file mode 100644
index 000000000..c7c0b1733
--- /dev/null
+++ b/svx/source/svdraw/textchainflow.cxx
@@ -0,0 +1,315 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/svdotext.hxx>
+#include <svx/svdoutl.hxx>
+#include <editeng/outlobj.hxx>
+#include <editeng/editobj.hxx>
+#include <editeng/overflowingtxt.hxx>
+#include <textchainflow.hxx>
+#include <sal/log.hxx>
+
+TextChainFlow::TextChainFlow(SdrTextObj *pChainTarget)
+    : mpTargetLink(pChainTarget)
+{
+    SAL_INFO("svx.chaining", "[TEXTCHAINFLOW] Creating a new TextChainFlow");
+
+    mpTextChain = mpTargetLink->GetTextChain();
+    mpNextLink = mpTargetLink->GetNextLinkInChain();
+
+    bUnderflow = bOverflow = false;
+
+    mbOFisUFinduced = false;
+
+    mpOverflChText = nullptr;
+    mpUnderflChText = nullptr;
+
+    mbPossiblyCursorOut = false;
+}
+
+
+TextChainFlow::~TextChainFlow()
+{
+    mpOverflChText.reset();
+    mpUnderflChText.reset();
+}
+
+void TextChainFlow::impSetFlowOutlinerParams(SdrOutliner *, SdrOutliner *)
+{
+    // Nothing to do if not in editing mode
+}
+
+/*
+ * Check for overflow in the state of pFlowOutl.
+ * If pParamOutl is not NULL sets some parameters from there.
+ * This is useful in case the outliner is not set for overflow
+ * (e.g. in editing mode we check for overflow in drawing outl but
+ *  parameters come from editing outliner)
+*/
+void TextChainFlow::impCheckForFlowEvents(SdrOutliner *pFlowOutl, SdrOutliner *pParamOutl)
+{
+    bool bOldUpdateMode = pFlowOutl->GetUpdateMode();
+
+    // XXX: This could be reorganized moving most of this stuff inside EditingTextChainFlow
+    if (pParamOutl != nullptr)
+    {
+        // We need this since it's required to check overflow
+        pFlowOutl->SetUpdateMode(true);
+
+        // XXX: does this work if you do it before setting the text? Seems so.
+        impSetFlowOutlinerParams(pFlowOutl, pParamOutl);
+    }
+
+    bool bIsPageOverflow = pFlowOutl->IsPageOverflow();
+
+    // NOTE: overflow and underflow cannot be both true
+    bOverflow = bIsPageOverflow && mpNextLink;
+    bUnderflow = !bIsPageOverflow &&  mpNextLink && mpNextLink->HasText();
+
+    // Get old state on whether to merge para-s or not
+    // NOTE: We handle UF/OF using the _old_ state. The new one is simply saved
+    bool bMustMergeParaAmongLinks = GetTextChain()->GetIsPartOfLastParaInNextLink(mpTargetLink);
+
+    // Set (Non)OverflowingTxt here (if any)
+
+    // If we had an underflow before we have to deep merge paras anyway
+    bool bMustMergeParaOF = bMustMergeParaAmongLinks || mbOFisUFinduced;
+
+    mpOverflChText.reset( bOverflow ?
+                     new OFlowChainedText(pFlowOutl, bMustMergeParaOF) :
+                     nullptr );
+
+    // Set current underflowing text (if any)
+    mpUnderflChText.reset( bUnderflow ?
+                      new UFlowChainedText(pFlowOutl, bMustMergeParaAmongLinks) :
+                      nullptr );
+
+    // Reset update mode // Reset it here because we use WriteRTF (needing updatemode = true) in the two constructors above
+    if (!bOldUpdateMode) // Reset only if the old value was false
+        pFlowOutl->SetUpdateMode(bOldUpdateMode);
+
+    // NOTE: Must be called after mp*ChText abd b*flow have been set but before mbOFisUFinduced is reset
+    impUpdateCursorInfo();
+
+    // To check whether an overflow is underflow induced or not (useful in cursor checking)
+    mbOFisUFinduced = bUnderflow;
+}
+
+void TextChainFlow::impUpdateCursorInfo()
+{
+    // XXX: Maybe we can get rid of mbOFisUFinduced by not allowing handling of more than one event by the same TextChainFlow
+    // if this is not an OF triggered during an UF
+
+    mbPossiblyCursorOut = bOverflow;
+
+    if(mbPossiblyCursorOut ) {
+        maOverflowPosSel = mpOverflChText->GetOverflowPointSel();
+        ESelection aSelAtUFTime = GetTextChain()->GetPreChainingSel(GetLinkTarget());
+        // Might be an invalid selection if the cursor at UF time was before
+        //   the (possibly UF-induced) Overflowing point but we don't use it in that case
+        maPostChainingSel = ESelection(aSelAtUFTime.nStartPara-maOverflowPosSel.nStartPara,
+                                       aSelAtUFTime.nStartPos-maOverflowPosSel.nStartPos );
+    }
+
+    // XXX: It may not be necessary anymore to keep this method separated from EditingTextChainFlow::impBroadcastCursorInfo
+}
+
+void TextChainFlow::CheckForFlowEvents(SdrOutliner *pFlowOutl)
+{
+    impCheckForFlowEvents(pFlowOutl, nullptr);
+}
+
+
+bool TextChainFlow::IsOverflow() const
+{
+    return bOverflow;
+}
+
+bool TextChainFlow::IsUnderflow() const
+{
+    return bUnderflow;
+}
+
+
+// XXX: In editing mode you need to get "underflowing" text from editing outliner, so it's kinda separate from the drawing one!
+
+// XXX:Would it be possible to unify underflow and its possibly following overflow?
+void TextChainFlow::ExecuteUnderflow(SdrOutliner *pOutl)
+{
+    //GetTextChain()->SetNilChainingEvent(mpTargetLink, true);
+    // making whole text
+    // merges underflowing text with the one in the next box
+    std::unique_ptr<OutlinerParaObject> pNewText = mpUnderflChText->CreateMergedUnderflowParaObject(pOutl, mpNextLink->GetOutlinerParaObject());
+
+    // Set the other box empty; it will be replaced by the rest of the text if overflow occurs
+    if (!mpTargetLink->GetPreventChainable())
+        mpNextLink->NbcSetOutlinerParaObject(pOutl->GetEmptyParaObject());
+
+    // We store the size since NbcSetOutlinerParaObject can change it
+    //Size aOldSize = pOutl->GetMaxAutoPaperSize();
+
+    auto pNewTextTemp = pNewText.get(); // because we need to access it after a std::move
+    // This should not be done in editing mode!! //XXX
+    if (!mpTargetLink->IsInEditMode())
+    {
+        mpTargetLink->NbcSetOutlinerParaObject(std::move(pNewText));
+    }
+
+    // Restore size and set new text
+    //pOutl->SetMaxAutoPaperSize(aOldSize); // XXX (it seems to be working anyway without this)
+    pOutl->SetText(*pNewTextTemp);
+
+    //GetTextChain()->SetNilChainingEvent(mpTargetLink, false);
+
+    // Check for new overflow
+    CheckForFlowEvents(pOutl);
+}
+
+void TextChainFlow::ExecuteOverflow(SdrOutliner *pNonOverflOutl, SdrOutliner *pOverflOutl)
+{
+    //GetTextChain()->SetNilChainingEvent(mpTargetLink, true);
+    // Leave only non overflowing text
+    impLeaveOnlyNonOverflowingText(pNonOverflOutl);
+
+    // Transfer of text to next link
+    if (!mpTargetLink->GetPreventChainable() ) // we don't transfer text while dragging because of resizing
+    {
+        impMoveChainedTextToNextLink(pOverflOutl);
+    }
+
+    //GetTextChain()->SetNilChainingEvent(mpTargetLink, false);
+}
+
+void TextChainFlow::impLeaveOnlyNonOverflowingText(SdrOutliner *pNonOverflOutl)
+{
+    std::unique_ptr<OutlinerParaObject> pNewText = mpOverflChText->RemoveOverflowingText(pNonOverflOutl);
+
+    SAL_INFO("svx.chaining", "[TEXTCHAINFLOW - OF] SOURCE box set to "
+             << pNewText->GetTextObject().GetParagraphCount() << " paras");
+
+    // adds it to current outliner anyway (useful in static decomposition)
+    pNonOverflOutl->SetText(*pNewText);
+
+    mpTargetLink->NbcSetOutlinerParaObject(std::move(pNewText));
+    // For some reason the paper size is lost after last instruction, so we set it.
+    pNonOverflOutl->SetPaperSize(Size(pNonOverflOutl->GetPaperSize().Width(),
+                                      pNonOverflOutl->GetTextHeight()));
+
+}
+
+void TextChainFlow::impMoveChainedTextToNextLink(SdrOutliner *pOverflOutl)
+{
+    // prevent copying text in same box
+    if ( mpNextLink ==  mpTargetLink ) {
+        SAL_INFO("svx.chaining", "[CHAINING] Trying to copy text for next link in same object");
+        return;
+    }
+
+    std::unique_ptr<OutlinerParaObject> pNewText =
+        mpOverflChText->InsertOverflowingText(pOverflOutl,
+                                              mpNextLink->GetOutlinerParaObject());
+    SAL_INFO("svx.chaining", "[TEXTCHAINFLOW - OF] DEST box set to "
+             << pNewText->GetTextObject().GetParagraphCount() << " paras");
+
+    if (pNewText)
+        mpNextLink->NbcSetOutlinerParaObject(std::move(pNewText));
+
+    // Set Deep Merge status
+    SAL_INFO("svx.chaining", "[DEEPMERGE] Setting deepMerge to "
+             << mpOverflChText->IsLastParaInterrupted());
+    GetTextChain()->SetIsPartOfLastParaInNextLink(
+                          mpTargetLink,
+                          mpOverflChText->IsLastParaInterrupted());
+}
+
+SdrTextObj *TextChainFlow::GetLinkTarget() const
+{
+    return mpTargetLink;
+}
+
+TextChain *TextChainFlow::GetTextChain() const
+{
+    return mpTextChain;
+}
+
+// EditingTextChainFlow
+
+EditingTextChainFlow::EditingTextChainFlow(SdrTextObj *pLinkTarget) :
+    TextChainFlow(pLinkTarget)
+{
+    SAL_INFO("svx.chaining", "[TEXTCHAINFLOW] Creating a new EditingTextChainFlow");
+}
+
+void EditingTextChainFlow::CheckForFlowEvents(SdrOutliner *pFlowOutl)
+{
+    // if this is editing outliner no need to set parameters
+    if (pFlowOutl == GetLinkTarget()->pEdtOutl)
+        impCheckForFlowEvents(pFlowOutl, nullptr);
+    else
+        impCheckForFlowEvents(pFlowOutl, GetLinkTarget()->pEdtOutl);
+
+    // Broadcast events for cursor handling
+    impBroadcastCursorInfo();
+}
+
+void EditingTextChainFlow::impLeaveOnlyNonOverflowingText(SdrOutliner *pNonOverflOutl)
+{
+    mpOverflChText->RemoveOverflowingText(pNonOverflOutl);
+    //impSetTextForEditingOutliner(pNewText); //XXX: Don't call it since we do everything with NonOverflowingText::ToParaObject // XXX: You may need this for Underflow
+
+    // XXX: I'm not sure whether we need this (after all operations such as Paste don't change this - as far as I understand)
+    //GetLinkTarget()->NbcSetOutlinerParaObject(pNewText);
+}
+
+void EditingTextChainFlow::impSetFlowOutlinerParams(SdrOutliner *pFlowOutl, SdrOutliner *pParamOutl)
+{
+    // Set right size for overflow
+    pFlowOutl->SetMaxAutoPaperSize(pParamOutl->GetMaxAutoPaperSize());
+    pFlowOutl->SetMinAutoPaperSize(pParamOutl->GetMinAutoPaperSize());
+    pFlowOutl->SetPaperSize(pParamOutl->GetPaperSize());
+}
+
+void EditingTextChainFlow::impBroadcastCursorInfo() const
+{
+    ESelection aPreChainingSel = GetTextChain()->GetPreChainingSel(GetLinkTarget()) ;
+
+    // Test whether the cursor is out of the box.
+    bool bCursorOut = mbPossiblyCursorOut && maOverflowPosSel < aPreChainingSel;
+
+    // NOTE: I handled already the stuff for the comments below. They will be kept temporarily till stuff settles down.
+    // Possibility: 1) why don't we stop passing the actual event to the TextChain and instead we pass
+    //              the overflow pos and mbPossiblyCursorOut
+    //              2) We pass the current selection before anything happens and we make impBroadcastCursorInfo compute it.
+
+
+    if (bCursorOut) {
+            //maCursorEvent = CursorChainingEvent::TO_NEXT_LINK;
+            GetTextChain()->SetPostChainingSel(GetLinkTarget(), maPostChainingSel);
+            GetTextChain()->SetCursorEvent(GetLinkTarget(), CursorChainingEvent::TO_NEXT_LINK);
+    } else {
+        //maCursorEvent = CursorChainingEvent::UNCHANGED;
+        GetTextChain()->SetPostChainingSel(GetLinkTarget(), aPreChainingSel);
+        GetTextChain()->SetCursorEvent(GetLinkTarget(), CursorChainingEvent::UNCHANGED);
+    }
+
+
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */