Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 1908 insertions, 0 deletions

diff --git a/svx/source/toolbars/extrusionbar.cxx b/svx/source/toolbars/extrusionbar.cxx
new file mode 100644
index 000000000..5ca8a22d1
--- /dev/null
+++ b/svx/source/toolbars/extrusionbar.cxx
@@ -0,0 +1,1319 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterType.hpp>
+#include <com/sun/star/drawing/ShadeMode.hpp>
+#include <com/sun/star/drawing/Position3D.hpp>
+#include <com/sun/star/drawing/Direction3D.hpp>
+#include <com/sun/star/drawing/ProjectionMode.hpp>
+#include <svx/svxids.hrc>
+#include <svx/svdundo.hxx>
+#include <sfx2/request.hxx>
+#include <sfx2/objface.hxx>
+#include <sfx2/viewsh.hxx>
+#include <sfx2/bindings.hxx>
+#include <svx/xsflclit.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdview.hxx>
+#include <editeng/colritem.hxx>
+#include <svx/chrtitem.hxx>
+#include <svx/sdasitm.hxx>
+#include <svl/intitem.hxx>
+#include <rtl/math.hxx>
+
+#include <svx/extrusionbar.hxx>
+#include <extrusiondepthdialog.hxx>
+
+using namespace ::svx;
+using namespace ::cppu;
+using namespace ::com::sun::star::beans;
+using namespace ::com::sun::star::drawing;
+using namespace ::com::sun::star::uno;
+
+// Declare the default interface. (The slotmap must not be empty, so
+// we enter something which never occurs here (hopefully).)
+static SfxSlot aExtrusionBarSlots_Impl[] =
+{
+    { 0, SfxGroupId::NONE, SfxSlotMode::NONE, 0, 0, nullptr, nullptr, nullptr, nullptr, nullptr, 0, SfxDisableFlags::NONE, nullptr }
+};
+
+SFX_IMPL_INTERFACE(ExtrusionBar, SfxShell)
+
+void ExtrusionBar::InitInterface_Impl()
+{
+    GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Svx_Extrusion_Bar);
+}
+
+
+ExtrusionBar::ExtrusionBar(SfxViewShell* pViewShell )
+: SfxShell(pViewShell)
+{
+    DBG_ASSERT( pViewShell, "svx::ExtrusionBar::ExtrusionBar(), I need a viewshell!" );
+    if( pViewShell )
+        SetPool(&pViewShell->GetPool());
+
+    SetName(SvxResId(RID_SVX_EXTRUSION_BAR));
+}
+
+ExtrusionBar::~ExtrusionBar()
+{
+    SetRepeatTarget(nullptr);
+}
+
+static void getLightingDirectionDefaults( const Direction3D **pLighting1Defaults, const Direction3D **pLighting2Defaults )
+{
+
+    static const Direction3D aLighting1Defaults[9] =
+    {
+        Direction3D( -50000, -50000, 10000 ),
+        Direction3D( 0, -50000, 10000 ),
+        Direction3D( 50000, -50000, 10000 ),
+        Direction3D( -50000, 0, 10000 ),
+        Direction3D( 0, 0, 10000 ),
+        Direction3D( 50000, 0, 10000 ),
+        Direction3D( -50000, 50000, 10000 ),
+        Direction3D( 0, 50000, 10000 ),
+        Direction3D( 50000, 50000, 10000 )
+    };
+
+    static const Direction3D aLighting2Defaults[9] =
+    {
+        Direction3D( 50000,0, 10000 ),
+        Direction3D( 0, 50000, 10000 ),
+        Direction3D( -50000, 0, 10000 ),
+        Direction3D( 50000, 0, 10000 ),
+        Direction3D( 0, 0, 10000 ),
+        Direction3D( -50000, 0, 10000 ),
+        Direction3D( 50000, 0, 10000 ),
+        Direction3D( 0, -50000, 10000 ),
+        Direction3D( -50000, 0, 10000 )
+    };
+
+    *pLighting1Defaults = aLighting1Defaults;
+    *pLighting2Defaults = aLighting2Defaults;
+};
+
+static void impl_execute( SfxRequest const & rReq, SdrCustomShapeGeometryItem& rGeometryItem, SdrObject* pObj )
+{
+    static const char sExtrusion[] = "Extrusion";
+    static const char sRotateAngle[] = "RotateAngle";
+
+    sal_uInt16 nSID = rReq.GetSlot();
+    switch( nSID )
+    {
+    case SID_EXTRUSION_TOGGLE:
+    {
+        css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+
+        if( pAny )
+        {
+            bool bOn(false);
+            (*pAny) >>= bOn;
+            bOn = !bOn;
+            (*pAny) <<= bOn;
+        }
+        else
+        {
+            css::beans::PropertyValue aPropValue;
+            aPropValue.Name = sExtrusion;
+            aPropValue.Value <<= true;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+        }
+    }
+    break;
+
+    case SID_EXTRUSION_TILT_DOWN:
+    case SID_EXTRUSION_TILT_UP:
+    case SID_EXTRUSION_TILT_LEFT:
+    case SID_EXTRUSION_TILT_RIGHT:
+    {
+        bool bHorizontal = ( nSID == SID_EXTRUSION_TILT_DOWN ) || ( nSID == SID_EXTRUSION_TILT_UP );
+        sal_Int32 nDiff = ( nSID == SID_EXTRUSION_TILT_LEFT ) || ( nSID == SID_EXTRUSION_TILT_UP ) ? 5 : -5;
+        EnhancedCustomShapeParameterPair aRotateAnglePropPair;
+        double fX = 0.0;
+        double fY = 0.0;
+        aRotateAnglePropPair.First.Value <<= fX;
+        aRotateAnglePropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+        aRotateAnglePropPair.Second.Value <<= fY;
+        aRotateAnglePropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+        css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sRotateAngle );
+        if( pAny && ( *pAny >>= aRotateAnglePropPair ) )
+        {
+            aRotateAnglePropPair.First.Value >>= fX;
+            aRotateAnglePropPair.Second.Value >>= fY;
+        }
+        if ( bHorizontal )
+            fX += nDiff;
+        else
+            fY += nDiff;
+        aRotateAnglePropPair.First.Value <<= fX;
+        aRotateAnglePropPair.Second.Value <<= fY;
+        css::beans::PropertyValue aPropValue;
+        aPropValue.Name = sRotateAngle;
+        aPropValue.Value <<= aRotateAnglePropPair;
+        rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+    }
+    break;
+
+    case SID_EXTRUSION_DIRECTION:
+    {
+        if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DIRECTION ) == SfxItemState::SET )
+        {
+            sal_Int32 nSkew = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_DIRECTION)->GetValue();
+
+            Position3D  aViewPoint( 3472, -3472, 25000 );
+            double      fOriginX = 0.50;
+            double      fOriginY = -0.50;
+            double      fSkewAngle = nSkew;
+            double      fSkew = 50.0;
+
+            switch( nSkew )
+            {
+            case 135:
+                aViewPoint.PositionY = 3472;
+                fOriginY = 0.50;
+                break;
+            case 90:
+                aViewPoint.PositionX = 0;
+                aViewPoint.PositionY = 3472;
+                fOriginX = 0;
+                fOriginY = -0.50;
+                break;
+            case 45:
+                aViewPoint.PositionX = -3472;
+                aViewPoint.PositionY = 3472;
+                fOriginX = -0.50;
+                fOriginY = 0.50;
+                break;
+            case 180:
+                aViewPoint.PositionY = 0;
+                fOriginY = 0;
+                break;
+            case 0:
+                aViewPoint.PositionX = 0;
+                aViewPoint.PositionY = 0;
+                fOriginX = 0;
+                fOriginY = 0;
+                fSkew = 0.0;
+                break;
+            case -360:
+                aViewPoint.PositionX = -3472;
+                aViewPoint.PositionY = 0;
+                fOriginX = -0.50;
+                fOriginY = 0;
+                break;
+            case -90:
+                aViewPoint.PositionX = 0;
+                fOriginX = 0;
+                break;
+            case -45:
+                aViewPoint.PositionX = -3472;
+                fOriginX = -0.50;
+                break;
+            }
+
+            css::beans::PropertyValue aPropValue;
+
+            aPropValue.Name = "ViewPoint";
+            aPropValue.Value <<= aViewPoint;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+
+            EnhancedCustomShapeParameterPair aOriginPropPair;
+            aOriginPropPair.First.Value <<= fOriginX;
+            aOriginPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+            aOriginPropPair.Second.Value <<= fOriginY;
+            aOriginPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+            aPropValue.Name = "Origin";
+            aPropValue.Value <<= aOriginPropPair;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            EnhancedCustomShapeParameterPair aSkewPropPair;
+            aSkewPropPair.First.Value <<= fSkew;
+            aSkewPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+            aSkewPropPair.Second.Value <<= fSkewAngle;
+            aSkewPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+            aPropValue.Name = "Skew";
+            aPropValue.Value <<= aSkewPropPair;
+            rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+        }
+    }
+    break;
+    case SID_EXTRUSION_PROJECTION:
+    {
+        if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_PROJECTION ) == SfxItemState::SET )
+        {
+            sal_Int32 nProjection = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_PROJECTION)->GetValue();
+            ProjectionMode eProjectionMode = nProjection == 1 ? ProjectionMode_PARALLEL : ProjectionMode_PERSPECTIVE;
+            css::beans::PropertyValue aPropValue;
+            aPropValue.Name = "ProjectionMode";
+            aPropValue.Value <<= eProjectionMode;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+        }
+    }
+    break;
+    case SID_EXTRUSION_DEPTH:
+    {
+        if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET)
+        {
+            double fDepth = rReq.GetArgs()->GetItem<SvxDoubleItem>(SID_EXTRUSION_DEPTH)->GetValue();
+            EnhancedCustomShapeParameterPair aDepthPropPair;
+            aDepthPropPair.First.Value <<= fDepth;
+            aDepthPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+            aDepthPropPair.Second.Value <<= 0.0; // fraction
+            aDepthPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+
+            css::beans::PropertyValue aPropValue;
+            aPropValue.Name = "Depth";
+            aPropValue.Value <<= aDepthPropPair;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+        }
+    }
+    break;
+    case SID_EXTRUSION_3D_COLOR:
+    {
+        if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_3D_COLOR ) == SfxItemState::SET)
+        {
+            Color aColor( static_cast<const SvxColorItem&>(rReq.GetArgs()->Get(SID_EXTRUSION_3D_COLOR)).GetValue() );
+
+            const bool bAuto = aColor == COL_AUTO;
+
+            css::beans::PropertyValue aPropValue;
+            aPropValue.Name = "Color";
+            aPropValue.Value <<= !bAuto;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            if( bAuto )
+            {
+                pObj->ClearMergedItem( XATTR_SECONDARYFILLCOLOR );
+            }
+            else
+            {
+                pObj->SetMergedItem( XSecondaryFillColorItem( "", aColor ) );
+            }
+            pObj->BroadcastObjectChange();
+        }
+    }
+    break;
+    case SID_EXTRUSION_SURFACE:
+    {
+        if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_SURFACE ) == SfxItemState::SET)
+        {
+            sal_Int32 nSurface = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_SURFACE)->GetValue();
+
+            ShadeMode eShadeMode( ShadeMode_FLAT );
+            bool bMetal = false;
+            double fSpecularity = 0;
+            double fDiffusion = 0;
+
+            switch( nSurface )
+            {
+            case 0: // wireframe
+                eShadeMode = ShadeMode_DRAFT;
+                break;
+            case 1: // matte
+                break;
+            case 2: // plastic
+                fSpecularity = 122.0;
+                break;
+            case 3: // metal
+                bMetal = true;
+                fSpecularity = 122.0;
+                fDiffusion = 122.0;
+                break;
+            }
+
+            css::beans::PropertyValue aPropValue;
+            aPropValue.Name = "ShadeMode";
+            aPropValue.Value <<= eShadeMode;
+            rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+            aPropValue.Name = "Metal";
+            aPropValue.Value <<= bMetal;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            aPropValue.Name = "Specularity";
+            aPropValue.Value <<= fSpecularity;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            aPropValue.Name = "Diffusion";
+            aPropValue.Value <<= fDiffusion;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+        }
+    }
+    break;
+    case SID_EXTRUSION_LIGHTING_INTENSITY:
+    {
+        if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_INTENSITY ) == SfxItemState::SET)
+        {
+            sal_Int32 nLevel = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_LIGHTING_INTENSITY)->GetValue();
+
+            double fBrightness;
+            bool bHarsh2 = false;
+            double fLevel1;
+            double fLevel2;
+
+            switch( nLevel )
+            {
+            case 0: // bright
+                fBrightness = 34.0;
+                bHarsh2 = false;
+                fLevel1 = 66.0;
+                fLevel2 = 66.0;
+                break;
+            case 1: // normal
+                fBrightness = 15.0;
+                bHarsh2 = false;
+                fLevel1 = 67.0;
+                fLevel2 = 37.0;
+                break;
+            case 2: // dim
+                fBrightness = 6.0;
+                bHarsh2 = true;
+                fLevel1 = 79.0;
+                fLevel2 = 21.0;
+                break;
+            }
+
+            css::beans::PropertyValue aPropValue;
+            aPropValue.Name = "Brightness";
+            aPropValue.Value <<= fBrightness;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            aPropValue.Name = "LightFace";
+            aPropValue.Value <<= true;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            aPropValue.Name = "FirstLightHarsh";
+            aPropValue.Value <<= true;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            aPropValue.Name = "SecondLightHarsh";
+            aPropValue.Value <<= bHarsh2;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            aPropValue.Name = "FirstLightLevel";
+            aPropValue.Value <<= fLevel1;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+            aPropValue.Name = "SecondLightLevel";
+            aPropValue.Value <<= fLevel2;
+            rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+        }
+    }
+    break;
+    case SID_EXTRUSION_LIGHTING_DIRECTION:
+    {
+        if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_DIRECTION ) == SfxItemState::SET)
+        {
+            sal_Int32 nDirection = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_LIGHTING_DIRECTION)->GetValue();
+
+            if((nDirection >= 0) && (nDirection < 9))
+            {
+                const Direction3D * pLighting1Defaults;
+                const Direction3D * pLighting2Defaults;
+
+                getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
+
+                css::beans::PropertyValue aPropValue;
+                aPropValue.Name = "FirstLightDirection";
+                aPropValue.Value <<= pLighting1Defaults[nDirection];
+                rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+
+                aPropValue.Name = "SecondLightDirection";
+                aPropValue.Value <<= pLighting2Defaults[nDirection];
+                rGeometryItem.SetPropertyValue( sExtrusion,  aPropValue );
+            }
+        }
+    }
+    break;
+
+    }
+}
+
+void ExtrusionBar::execute( SdrView* pSdrView, SfxRequest const & rReq, SfxBindings& rBindings )
+{
+    sal_uInt16 nSID = rReq.GetSlot();
+    const char* pStrResId = nullptr;
+
+    const bool bUndo = pSdrView && pSdrView->IsUndoEnabled();
+
+    switch( nSID )
+    {
+        case SID_EXTRUSION_TOGGLE:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ON_OFF;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_TILT_DOWN:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_DOWN;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_TILT_UP:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_UP;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_TILT_LEFT:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_LEFT;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_TILT_RIGHT:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_RIGHT;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_DIRECTION:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ORIENTATION;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_PROJECTION:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_PROJECTION;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_DEPTH:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_DEPTH;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_3D_COLOR:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_COLOR;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_SURFACE:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_SURFACE;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_LIGHTING_INTENSITY:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_BRIGHTNESS;
+            [[fallthrough]];
+        }
+        case SID_EXTRUSION_LIGHTING_DIRECTION:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_LIGHTING;
+
+            if (pSdrView)
+            {
+                const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+                const size_t nCount = rMarkList.GetMarkCount();
+
+                for(size_t i=0; i<nCount; ++i)
+                {
+                    SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+                    if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+                    {
+                        if( bUndo )
+                        {
+                            OUString aStr( SvxResId( pStrResId ) );
+                            pSdrView->BegUndo( aStr );
+                            pSdrView->AddUndo( pSdrView->GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pObj ) );
+                        }
+                        SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+                        impl_execute( rReq, aGeometryItem, pObj );
+                        pObj->SetMergedItem( aGeometryItem );
+                        pObj->BroadcastObjectChange();
+                        if( bUndo )
+                            pSdrView->EndUndo();
+
+                        // simulate a context change:
+                        // force SelectionHasChanged() being called
+                        // so that extrusion bar will be visible/hidden
+                        pSdrView->MarkListHasChanged();
+                    }
+                }
+            }
+        }
+        break;
+
+        case SID_EXTRUSION_DEPTH_DIALOG:
+            if( rReq.GetArgs() &&
+                (rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET) &&
+                (rReq.GetArgs()->GetItemState( SID_ATTR_METRIC ) == SfxItemState::SET))
+            {
+                double fDepth = rReq.GetArgs()->GetItem<SvxDoubleItem>(SID_EXTRUSION_DEPTH)->GetValue();
+                FieldUnit eUnit = static_cast<FieldUnit>(rReq.GetArgs()->GetItem<SfxUInt16Item>(SID_ATTR_METRIC)->GetValue());
+
+                ExtrusionDepthDialog aDlg(rReq.GetFrameWeld(), fDepth, eUnit);
+                sal_uInt16 nRet = aDlg.run();
+                if (nRet == RET_OK)
+                {
+                    fDepth = aDlg.getDepth();
+
+                    SvxDoubleItem aItem( fDepth, SID_EXTRUSION_DEPTH );
+                    SfxPoolItem* aItems[] = { &aItem, nullptr };
+                    rBindings.Execute( SID_EXTRUSION_DEPTH, const_cast<const SfxPoolItem**>(aItems) );
+                }
+            }
+            break;
+    }
+
+    if( nSID == SID_EXTRUSION_TOGGLE )
+    {
+        static const sal_uInt16 SidArray[] = {
+                SID_EXTRUSION_TILT_DOWN,
+                SID_EXTRUSION_TILT_UP,
+                SID_EXTRUSION_TILT_LEFT,
+                SID_EXTRUSION_TILT_RIGHT,
+                SID_EXTRUSION_DEPTH_FLOATER,
+                SID_EXTRUSION_DIRECTION_FLOATER,
+                SID_EXTRUSION_LIGHTING_FLOATER,
+                SID_EXTRUSION_SURFACE_FLOATER,
+                SID_EXTRUSION_3D_COLOR,
+                SID_EXTRUSION_DEPTH,
+                SID_EXTRUSION_DIRECTION,
+                SID_EXTRUSION_PROJECTION,
+                SID_EXTRUSION_LIGHTING_DIRECTION,
+                SID_EXTRUSION_LIGHTING_INTENSITY,
+                SID_EXTRUSION_SURFACE,
+                0 };
+
+        rBindings.Invalidate( SidArray );
+    }
+}
+
+static void getExtrusionDirectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    static const char  sExtrusion[] = "Extrusion";
+
+    const css::uno::Any* pAny;
+
+    double fFinalSkewAngle = -1;
+    bool bHasCustomShape = false;
+
+    for(size_t i=0; i<nCount; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+            // see if this is an extruded customshape
+            if( !bHasCustomShape )
+            {
+                const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny_ )
+                    *pAny_ >>= bHasCustomShape;
+
+                if( !bHasCustomShape )
+                    continue;
+            }
+
+            bool        bParallel = true;
+            Position3D  aViewPoint( 3472, -3472, 25000 );
+            double      fSkewAngle = -135;
+
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ProjectionMode" );
+            sal_Int16 nProjectionMode = sal_Int16();
+            if( pAny && ( *pAny >>= nProjectionMode ) )
+                bParallel = static_cast<ProjectionMode>(nProjectionMode) == ProjectionMode_PARALLEL;
+
+            if( bParallel )
+            {
+                double      fSkew = 50.0;
+                EnhancedCustomShapeParameterPair aSkewPropPair;
+                pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Skew" );
+                if( pAny && ( *pAny >>= aSkewPropPair ) )
+                {
+                    aSkewPropPair.First.Value >>= fSkew;
+                    aSkewPropPair.Second.Value >>= fSkewAngle;
+                }
+                if ( fSkew == 0.0 )
+                    fSkewAngle = 0.0;
+                else if ( fSkewAngle == 0.0 )
+                    fSkewAngle = -360.0;
+            }
+            else
+            {
+                double      fOriginX = 0.50;
+                double      fOriginY = -0.50;
+                pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ViewPoint" );
+                if( pAny )
+                    *pAny >>= aViewPoint;
+
+                EnhancedCustomShapeParameterPair aOriginPropPair;
+                pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Origin" );
+                if( pAny && ( *pAny >>= aOriginPropPair ) )
+                {
+                    aOriginPropPair.First.Value >>= fOriginX;
+                    aOriginPropPair.Second.Value >>= fOriginY;
+                }
+                fSkewAngle = -1;
+                const double e = 0.0001;
+                if( aViewPoint.PositionX > e )
+                {
+                    if( aViewPoint.PositionY > e )
+                    {
+                        if( (fOriginX > e ) && ( fOriginY > e ) )
+                            fSkewAngle = 135.0;
+                    }
+                    else if( aViewPoint.PositionY < -e )
+                    {
+                        if( ( fOriginX > e ) && ( fOriginY < -e ) )
+                            fSkewAngle = -135.0;
+                    }
+                    else
+                    {
+                        if( ( fOriginX > e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+                            fSkewAngle = 180.0;
+                    }
+                }
+                else if( aViewPoint.PositionX < -e )
+                {
+                    if( aViewPoint.PositionY < -e )
+                    {
+                        if( ( fOriginX < -e ) && ( fOriginY < -e ) )
+                            fSkewAngle = -45.0;
+                    }
+                    else if( aViewPoint.PositionY > e )
+                    {
+                        if( ( fOriginX < -e ) && ( fOriginY > e ) )
+                            fSkewAngle = 45.0;
+                    }
+                    else
+                    {
+                        if( ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+                            fSkewAngle = -360.0;
+                    }
+                }
+                else
+                {
+                    if( aViewPoint.PositionY < -e )
+                    {
+                        if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY < -e ) )
+                            fSkewAngle = -90.0;
+                    }
+                    else if( aViewPoint.PositionY > e )
+                    {
+                        if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > e ) )
+                            fSkewAngle = 90.0;
+                    }
+                    else
+                    {
+                        if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+                            fSkewAngle = 0.0;
+                    }
+                }
+            }
+
+            if( rtl::math::approxEqual(fFinalSkewAngle, -1.0) )
+            {
+                fFinalSkewAngle = fSkewAngle;
+            }
+            else if( !rtl::math::approxEqual(fSkewAngle, fFinalSkewAngle) )
+            {
+                fFinalSkewAngle = -1.0;
+            }
+
+            if( rtl::math::approxEqual(fFinalSkewAngle, -1.0) )
+                break;
+        }
+    }
+
+    if( bHasCustomShape )
+        rSet.Put( SfxInt32Item( SID_EXTRUSION_DIRECTION, static_cast<sal_Int32>(fFinalSkewAngle) ) );
+    else
+        rSet.DisableItem( SID_EXTRUSION_DIRECTION );
+}
+
+static void getExtrusionProjectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    static const char  sExtrusion[] = "Extrusion";
+
+    const css::uno::Any* pAny;
+
+    sal_Int32 nFinalProjection = -1;
+    bool bHasCustomShape = false;
+
+    for(size_t i=0; i<nCount; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            // see if this is an extruded customshape
+            if( !bHasCustomShape )
+            {
+                const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+                const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny_ )
+                    *pAny_ >>= bHasCustomShape;
+
+                if( !bHasCustomShape )
+                    continue;
+            }
+
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+            bool    bParallel = true;
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ProjectionMode" );
+            ProjectionMode eProjectionMode;
+            if( pAny && ( *pAny >>= eProjectionMode ) )
+                bParallel = eProjectionMode == ProjectionMode_PARALLEL;
+
+            if( nFinalProjection == -1 )
+            {
+                nFinalProjection = bParallel ? 1 : 0;
+            }
+            else if( nFinalProjection != (bParallel ? 1 : 0) )
+            {
+                nFinalProjection = -1;
+                break;
+            }
+        }
+    }
+
+    if( bHasCustomShape )
+        rSet.Put( SfxInt32Item( SID_EXTRUSION_PROJECTION, nFinalProjection ) );
+    else
+        rSet.DisableItem( SID_EXTRUSION_PROJECTION );
+}
+
+static void getExtrusionSurfaceState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    static const char  sExtrusion[] = "Extrusion";
+
+    const css::uno::Any* pAny;
+
+    sal_Int32 nFinalSurface = -1;
+    bool bHasCustomShape = false;
+
+    for(size_t i=0; i<nCount; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+            // see if this is an extruded customshape
+            if( !bHasCustomShape )
+            {
+                const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny_ )
+                    *pAny_ >>= bHasCustomShape;
+
+                if( !bHasCustomShape )
+                    continue;
+            }
+
+            sal_Int32 nSurface = 0; // wire frame
+
+            ShadeMode eShadeMode( ShadeMode_FLAT );
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ShadeMode" );
+            if( pAny )
+                *pAny >>= eShadeMode;
+
+            if( eShadeMode == ShadeMode_FLAT )
+            {
+                bool bMetal = false;
+                pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Metal" );
+                if( pAny )
+                    *pAny >>= bMetal;
+
+                if( bMetal )
+                {
+                    nSurface = 3; // metal
+                }
+                else
+                {
+                    double fSpecularity = 0;
+                    pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Specularity" );
+                    if( pAny )
+                        *pAny >>= fSpecularity;
+
+                    const double e = 0.0001;
+                    if( (fSpecularity > -e) && (fSpecularity < e) )
+                    {
+                        nSurface = 1; // matte
+                    }
+                    else
+                    {
+                        nSurface = 2; // plastic
+                    }
+                }
+            }
+
+            if( nFinalSurface == -1 )
+            {
+                nFinalSurface = nSurface;
+            }
+            else if( nFinalSurface != nSurface )
+            {
+                nFinalSurface = -1;
+                break;
+            }
+        }
+    }
+
+    if( bHasCustomShape )
+        rSet.Put( SfxInt32Item( SID_EXTRUSION_SURFACE, nFinalSurface ) );
+    else
+        rSet.DisableItem( SID_EXTRUSION_SURFACE );
+}
+
+static void getExtrusionDepthState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    static const char  sExtrusion[] = "Extrusion";
+
+    const css::uno::Any* pAny;
+
+    double fFinalDepth = -1;
+    bool bHasCustomShape = false;
+
+    for(size_t i=0; i<nCount; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+            // see if this is an extruded customshape
+            if( !bHasCustomShape )
+            {
+                const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny_ )
+                    *pAny_ >>= bHasCustomShape;
+
+                if( !bHasCustomShape )
+                    continue;
+            }
+
+            double fDepth = 1270.0;
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Depth" );
+            if( pAny )
+            {
+                EnhancedCustomShapeParameterPair aDepthPropPair;
+                if ( *pAny >>= aDepthPropPair )
+                    aDepthPropPair.First.Value >>= fDepth;
+            }
+
+            if( fFinalDepth == -1 )
+            {
+                fFinalDepth = fDepth;
+            }
+            else if( !rtl::math::approxEqual(fFinalDepth, fDepth) )
+            {
+                fFinalDepth = -1;
+                break;
+            }
+        }
+    }
+
+    if( pSdrView->GetModel() )
+    {
+        FieldUnit eUnit = pSdrView->GetModel()->GetUIUnit();
+        rSet.Put( SfxUInt16Item( SID_ATTR_METRIC, static_cast<sal_uInt16>(eUnit) ) );
+    }
+
+    if( bHasCustomShape )
+        rSet.Put( SvxDoubleItem( fFinalDepth, SID_EXTRUSION_DEPTH ) );
+    else
+        rSet.DisableItem( SID_EXTRUSION_DEPTH );
+}
+
+static bool compare_direction( const Direction3D& d1, const Direction3D& d2 )
+{
+    if( ((d1.DirectionX < 0) && (d2.DirectionX < 0)) || ((d1.DirectionX == 0) && (d2.DirectionX == 0)) || ((d1.DirectionX > 0) && (d2.DirectionX > 0)) )
+    {
+        if( ((d1.DirectionY < 0) && (d2.DirectionY < 0)) || ((d1.DirectionY == 0) && (d2.DirectionY == 0)) || ((d1.DirectionY > 0) && (d2.DirectionY > 0)) )
+        {
+            if( ((d1.DirectionZ < 0) && (d2.DirectionZ < 0)) || ((d1.DirectionZ == 0) && (d2.DirectionZ == 0)) || ((d1.DirectionZ > 0) && (d2.DirectionZ > 0)) )
+            {
+                return true;
+            }
+        }
+    }
+
+    return false;
+}
+
+static void getExtrusionLightingDirectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    static const char  sExtrusion[] = "Extrusion";
+
+    const Direction3D * pLighting1Defaults;
+    const Direction3D * pLighting2Defaults;
+
+    getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
+
+    const css::uno::Any* pAny;
+
+    int nFinalDirection = -1;
+    bool bHasCustomShape = false;
+
+    for(size_t i=0; i<nCount; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+            // see if this is an extruded customshape
+            if( !bHasCustomShape )
+            {
+                const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny_ )
+                    *pAny_ >>= bHasCustomShape;
+
+                if( !bHasCustomShape )
+                    continue;
+            }
+
+            Direction3D aFirstLightDirection( 50000, 0, 10000 );
+            Direction3D aSecondLightDirection( -50000, 0, 10000 );
+
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "FirstLightDirection" );
+            if( pAny )
+                *pAny >>= aFirstLightDirection;
+
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "SecondLightDirection" );
+            if( pAny )
+                *pAny >>= aSecondLightDirection;
+
+            int nDirection = -1;
+
+            int j;
+            for( j = 0; j < 9; j++ )
+            {
+                if( compare_direction( aFirstLightDirection, pLighting1Defaults[j] ) &&
+                    compare_direction( aSecondLightDirection, pLighting2Defaults[j] ))
+                {
+                    nDirection = j;
+                    break;
+                }
+            }
+
+            if( nFinalDirection == -1 )
+            {
+                nFinalDirection = nDirection;
+            }
+            else if( nDirection != nFinalDirection )
+            {
+                nFinalDirection = -1;
+            }
+
+            if( nFinalDirection == -1 )
+                break;
+        }
+    }
+
+    if( bHasCustomShape )
+        rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_DIRECTION, static_cast<sal_Int32>(nFinalDirection) ) );
+    else
+        rSet.DisableItem( SID_EXTRUSION_LIGHTING_DIRECTION );
+}
+
+static void getExtrusionLightingIntensityState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    static const char  sExtrusion[] = "Extrusion";
+
+    const css::uno::Any* pAny;
+
+    int nFinalLevel = -1;
+    bool bHasCustomShape = false;
+
+    for(size_t i=0; i<nCount; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+            // see if this is an extruded customshape
+            if( !bHasCustomShape )
+            {
+                const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny_ )
+                    *pAny_ >>= bHasCustomShape;
+
+                if( !bHasCustomShape )
+                    continue;
+            }
+
+            double fBrightness = 22178.0 / 655.36;
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Brightness" );
+            if( pAny )
+                *pAny >>= fBrightness;
+
+            int nLevel;
+            if( fBrightness >= 30.0 )
+            {
+                nLevel = 0; // Bright
+            }
+            else if( fBrightness >= 10.0 )
+            {
+                nLevel = 1; // Normal;
+            }
+            else
+            {
+                nLevel = 2; // Dim
+            }
+
+            if( nFinalLevel == -1 )
+            {
+                nFinalLevel = nLevel;
+            }
+            else if( nFinalLevel != nLevel )
+            {
+                nFinalLevel = -1;
+                break;
+            }
+        }
+    }
+
+    if( bHasCustomShape )
+        rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_INTENSITY, nFinalLevel ) );
+    else
+        rSet.DisableItem( SID_EXTRUSION_LIGHTING_INTENSITY );
+}
+
+static void getExtrusionColorState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    static const char  sExtrusion[] = "Extrusion";
+
+    const css::uno::Any* pAny;
+
+    bool bInit = false;
+    bool bAmbigius = false;
+    Color aFinalColor;
+    bool bHasCustomShape = false;
+
+    for(size_t i=0; i<nCount; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+            // see if this is an extruded customshape
+            if( !bHasCustomShape )
+            {
+                const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny_ )
+                    *pAny_ >>= bHasCustomShape;
+
+                if( !bHasCustomShape )
+                    continue;
+            }
+
+            Color aColor;
+
+            bool bUseColor = false;
+            pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Color" );
+            if( pAny )
+                *pAny >>= bUseColor;
+
+            if( bUseColor )
+            {
+                const XSecondaryFillColorItem& rItem = pObj->GetMergedItem( XATTR_SECONDARYFILLCOLOR );
+                aColor = rItem.GetColorValue();
+            }
+            else
+            {
+                aColor = COL_AUTO;
+            }
+
+            if( !bInit )
+            {
+                aFinalColor = aColor;
+                bInit = true;
+            }
+            else if( aFinalColor != aColor )
+            {
+                bAmbigius = true;
+                break;
+            }
+        }
+    }
+
+    if( bAmbigius )
+        aFinalColor = COL_AUTO;
+
+    if( bHasCustomShape )
+        rSet.Put( SvxColorItem( aFinalColor, SID_EXTRUSION_3D_COLOR ) );
+    else
+        rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
+}
+
+namespace svx {
+bool checkForSelectedCustomShapes( SdrView const * pSdrView, bool bOnlyExtruded )
+{
+    static const char  sExtrusion[] = "Extrusion";
+
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+    bool bFound = false;
+
+    for(size_t i=0;(i<nCount) && !bFound ; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            if( bOnlyExtruded )
+            {
+                const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+                const Any* pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+                if( pAny )
+                    *pAny >>= bFound;
+            }
+            else
+            {
+                bFound = true;
+            }
+        }
+    }
+
+    return bFound;
+}
+}
+
+void ExtrusionBar::getState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    if (rSet.GetItemState(SID_EXTRUSION_DIRECTION) != SfxItemState::UNKNOWN)
+    {
+        getExtrusionDirectionState( pSdrView, rSet );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_PROJECTION) != SfxItemState::UNKNOWN)
+    {
+        getExtrusionProjectionState( pSdrView, rSet );
+    }
+    const bool bOnlyExtrudedCustomShapes =
+        checkForSelectedCustomShapes( pSdrView, true );
+    if (rSet.GetItemState(SID_EXTRUSION_TILT_DOWN) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_TILT_DOWN) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_TILT_UP) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_TILT_UP );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_TILT_LEFT) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_TILT_LEFT );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_TILT_RIGHT) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_TILT_RIGHT );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_3D_COLOR) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_DEPTH_FLOATER) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_DEPTH_FLOATER );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_DIRECTION_FLOATER) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_DIRECTION_FLOATER );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_FLOATER) != SfxItemState::UNKNOWN)
+    {
+        if (! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_LIGHTING_FLOATER );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_SURFACE_FLOATER) != SfxItemState::UNKNOWN)
+    {
+        if(! bOnlyExtrudedCustomShapes)
+            rSet.DisableItem( SID_EXTRUSION_SURFACE_FLOATER );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_TOGGLE) != SfxItemState::UNKNOWN)
+    {
+        if( !checkForSelectedCustomShapes( pSdrView, false ) )
+            rSet.DisableItem( SID_EXTRUSION_TOGGLE );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_DEPTH) != SfxItemState::UNKNOWN)
+    {
+        getExtrusionDepthState( pSdrView, rSet );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_SURFACE) != SfxItemState::UNKNOWN)
+    {
+        getExtrusionSurfaceState( pSdrView, rSet );
+    }
+    if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_INTENSITY) != SfxItemState::UNKNOWN)
+    {
+        getExtrusionLightingIntensityState( pSdrView, rSet );
+    }
+
+    if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_DIRECTION) != SfxItemState::UNKNOWN)
+    {
+        getExtrusionLightingDirectionState( pSdrView, rSet );
+    }
+
+    if (rSet.GetItemState(SID_EXTRUSION_3D_COLOR) != SfxItemState::UNKNOWN)
+    {
+        getExtrusionColorState( pSdrView, rSet );
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/toolbars/fontworkbar.cxx b/svx/source/toolbars/fontworkbar.cxx
new file mode 100644
index 000000000..ae46b755b
--- /dev/null
+++ b/svx/source/toolbars/fontworkbar.cxx
@@ -0,0 +1,589 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdundo.hxx>
+#include <sfx2/request.hxx>
+#include <sfx2/objface.hxx>
+#include <sfx2/viewsh.hxx>
+#include <svx/unoapi.hxx>
+#include <com/sun/star/drawing/XShape.hpp>
+#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp>
+#include <sal/log.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdpage.hxx>
+#include <svx/svdview.hxx>
+#include <svx/sdasitm.hxx>
+#include <svx/gallery.hxx>
+#include <svx/fmmodel.hxx>
+#include <svx/sdtfsitm.hxx>
+#include <svl/itempool.hxx>
+#include <svl/stritem.hxx>
+#include <sfx2/bindings.hxx>
+#include <editeng/eeitem.hxx>
+#include <editeng/charscaleitem.hxx>
+#include <editeng/kernitem.hxx>
+
+#include <svx/svxids.hrc>
+#include <svx/fontworkbar.hxx>
+#include <svx/fontworkgallery.hxx>
+
+
+using namespace ::svx;
+using namespace ::cppu;
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::beans;
+using namespace ::com::sun::star::uno;
+
+static void SetAlignmentState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    sal_Int32   nAlignment = -1;
+    for( size_t i = 0; i < nCount; ++i )
+    {
+        SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            sal_Int32 nOldAlignment = nAlignment;
+            const SdrTextHorzAdjustItem&      rTextHorzAdjustItem    = pObj->GetMergedItem( SDRATTR_TEXT_HORZADJUST );
+            const SdrTextFitToSizeTypeItem&   rTextFitToSizeTypeItem = pObj->GetMergedItem( SDRATTR_TEXT_FITTOSIZE );
+            switch ( rTextHorzAdjustItem.GetValue() )
+            {
+                case SDRTEXTHORZADJUST_LEFT   : nAlignment = 0; break;
+                case SDRTEXTHORZADJUST_CENTER : nAlignment = 1; break;
+                case SDRTEXTHORZADJUST_RIGHT  : nAlignment = 2; break;
+                case SDRTEXTHORZADJUST_BLOCK  :
+                {
+                    auto const fit(rTextFitToSizeTypeItem.GetValue());
+                    if (fit == drawing::TextFitToSizeType_NONE)
+                    {
+                        nAlignment = 3;
+                    }
+                    else if (fit == drawing::TextFitToSizeType_ALLLINES ||
+                             fit == drawing::TextFitToSizeType_PROPORTIONAL)
+                    {
+                        nAlignment = 4;
+                    }
+                }
+            }
+            if ( ( nOldAlignment != -1 ) && ( nOldAlignment != nAlignment ) )
+            {
+                nAlignment = -1;
+                break;
+            }
+        }
+    }
+    rSet.Put( SfxInt32Item( SID_FONTWORK_ALIGNMENT, nAlignment ) );
+}
+
+static void SetCharacterSpacingState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    sal_Int32   nCharacterSpacing = -1;
+    for( size_t i = 0; i < nCount; ++i )
+    {
+        SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            sal_Int32 nOldCharacterSpacing = nCharacterSpacing;
+            const SvxCharScaleWidthItem& rCharScaleWidthItem = pObj->GetMergedItem( EE_CHAR_FONTWIDTH );
+            nCharacterSpacing = rCharScaleWidthItem.GetValue();
+            if ( ( nOldCharacterSpacing != -1 ) && ( nOldCharacterSpacing != nCharacterSpacing ) )
+            {
+                nCharacterSpacing = -1;
+                break;
+            }
+        }
+    }
+    rSet.Put( SfxInt32Item( SID_FONTWORK_CHARACTER_SPACING, nCharacterSpacing ) );
+}
+
+
+static void SetKernCharacterPairsState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    bool    bChecked = false;
+    for( size_t i = 0; i < nCount; ++i )
+    {
+        SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SvxKerningItem& rKerningItem = pObj->GetMergedItem( EE_CHAR_KERNING );
+            if ( rKerningItem.GetValue() )
+                bChecked = true;
+        }
+    }
+    rSet.Put( SfxBoolItem( SID_FONTWORK_KERN_CHARACTER_PAIRS, bChecked ) );
+}
+
+static void SetFontWorkShapeTypeState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+
+    OUString aFontWorkShapeType;
+
+    for( size_t i = 0; i < nCount; ++i )
+    {
+        SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+            const Any* pAny = aGeometryItem.GetPropertyValueByName( "Type" );
+            if( pAny )
+            {
+                OUString aType;
+                if ( *pAny >>= aType )
+                {
+                    if ( !aFontWorkShapeType.isEmpty() )
+                    {
+                        if ( aFontWorkShapeType != aType )  // different FontWorkShapeTypes selected ?
+                        {
+                            aFontWorkShapeType.clear();
+                            break;
+                        }
+                    }
+                    aFontWorkShapeType = aType;
+                }
+            }
+        }
+    }
+    rSet.Put( SfxStringItem( SID_FONTWORK_SHAPE_TYPE, aFontWorkShapeType ) );
+}
+
+// Declare the default interface. (The slotmap must not be empty, so
+// we enter something which never occurs here (hopefully).)
+static SfxSlot aFontworkBarSlots_Impl[] =
+{
+    { 0, SfxGroupId::NONE, SfxSlotMode::NONE, 0, 0, nullptr, nullptr, nullptr, nullptr, nullptr, 0, SfxDisableFlags::NONE, nullptr }
+};
+
+SFX_IMPL_INTERFACE(FontworkBar, SfxShell)
+
+void FontworkBar::InitInterface_Impl()
+{
+    GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Svx_Fontwork_Bar);
+}
+
+
+FontworkBar::FontworkBar(SfxViewShell* pViewShell )
+: SfxShell(pViewShell)
+{
+    DBG_ASSERT( pViewShell, "svx::FontworkBar::FontworkBar(), I need a viewshell!" );
+    if( pViewShell )
+        SetPool(&pViewShell->GetPool());
+
+    SetName( SvxResId( RID_SVX_FONTWORK_BAR ));
+}
+
+FontworkBar::~FontworkBar()
+{
+    SetRepeatTarget(nullptr);
+}
+
+namespace svx {
+bool checkForSelectedFontWork( SdrView const * pSdrView, sal_uInt32& nCheckStatus )
+{
+    if ( nCheckStatus & 2 )
+        return ( nCheckStatus & 1 ) != 0;
+
+    static const char sTextPath[] = "TextPath";
+
+    const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+    const size_t nCount = rMarkList.GetMarkCount();
+    bool bFound = false;
+    for(size_t i=0; (i<nCount) && !bFound ; ++i)
+    {
+        SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+        if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+        {
+            const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+            const Any* pAny = aGeometryItem.GetPropertyValueByName( sTextPath, sTextPath );
+            if( pAny )
+                *pAny >>= bFound;
+        }
+    }
+    if ( bFound )
+        nCheckStatus |= 1;
+    nCheckStatus |= 2;
+    return bFound;
+}
+}
+
+static void impl_execute( SfxRequest const & rReq, SdrCustomShapeGeometryItem& rGeometryItem, SdrObject* pObj )
+{
+    sal_uInt16 nSID = rReq.GetSlot();
+    switch( nSID )
+    {
+        case SID_FONTWORK_SAME_LETTER_HEIGHTS:
+        {
+            css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( "TextPath", "SameLetterHeights" );
+            if( pAny )
+            {
+                bool bOn = false;
+                (*pAny) >>= bOn;
+                bOn = !bOn;
+                (*pAny) <<= bOn;
+            }
+        }
+        break;
+
+        case SID_FONTWORK_ALIGNMENT:
+        {
+            if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_FONTWORK_ALIGNMENT ) == SfxItemState::SET )
+            {
+                sal_Int32 nValue = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_FONTWORK_ALIGNMENT)->GetValue();
+                if ( ( nValue >= 0 ) && ( nValue < 5 ) )
+                {
+                    drawing::TextFitToSizeType eFTS = drawing::TextFitToSizeType_NONE;
+                    SdrTextHorzAdjust eHorzAdjust;
+                    switch ( nValue )
+                    {
+                        case 4 : eFTS = drawing::TextFitToSizeType_ALLLINES; [[fallthrough]];
+                        case 3 : eHorzAdjust = SDRTEXTHORZADJUST_BLOCK; break;
+                        default: eHorzAdjust = SDRTEXTHORZADJUST_LEFT; break;
+                        case 1 : eHorzAdjust = SDRTEXTHORZADJUST_CENTER; break;
+                        case 2 : eHorzAdjust = SDRTEXTHORZADJUST_RIGHT; break;
+                    }
+                    pObj->SetMergedItem( SdrTextHorzAdjustItem( eHorzAdjust ) );
+                    pObj->SetMergedItem( SdrTextFitToSizeTypeItem( eFTS ) );
+                    pObj->BroadcastObjectChange();
+                }
+            }
+        }
+        break;
+
+        case SID_FONTWORK_CHARACTER_SPACING:
+        {
+            if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_CHARACTER_SPACING ) == SfxItemState::SET ) )
+            {
+                sal_Int32 nCharSpacing = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_FONTWORK_CHARACTER_SPACING)->GetValue();
+                pObj->SetMergedItem( SvxCharScaleWidthItem( static_cast<sal_uInt16>(nCharSpacing), EE_CHAR_FONTWIDTH ) );
+                pObj->BroadcastObjectChange();
+            }
+        }
+        break;
+
+        case SID_FONTWORK_KERN_CHARACTER_PAIRS:
+        {
+            if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_KERN_CHARACTER_PAIRS ) == SfxItemState::SET ) )
+            {
+                // sal_Bool bKernCharacterPairs = ((const SfxBoolItem*)rReq.GetArgs()->GetItem(SID_FONTWORK_KERN_CHARACTER_PAIRS))->GetValue();
+//TODO:             pObj->SetMergedItem( SvxCharScaleWidthItem( (sal_uInt16)nCharSpacing, EE_CHAR_FONTWIDTH ) );
+                pObj->BroadcastObjectChange();
+            }
+        }
+        break;
+    }
+}
+
+static void GetGeometryForCustomShape( SdrCustomShapeGeometryItem& rGeometryItem, const OUString& rCustomShape )
+{
+    const OUString sType( "Type" );
+
+    css::beans::PropertyValue aPropVal;
+    aPropVal.Name = sType;
+    aPropVal.Value <<= rCustomShape;
+    rGeometryItem.SetPropertyValue( aPropVal );
+
+    const OUString sAdjustmentValues( "AdjustmentValues" );
+    const OUString sCoordinateOrigin( "CoordinateOrigin" );
+    const OUString sCoordinateSize( "CoordinateSize" );
+    const OUString sEquations( "Equations" );
+    const OUString sHandles( "Handles" );
+    const OUString sPath( "Path" );
+    rGeometryItem.ClearPropertyValue( sAdjustmentValues );
+    rGeometryItem.ClearPropertyValue( sCoordinateOrigin );
+    rGeometryItem.ClearPropertyValue( sCoordinateSize );
+    rGeometryItem.ClearPropertyValue( sEquations );
+    rGeometryItem.ClearPropertyValue( sHandles );
+    rGeometryItem.ClearPropertyValue( sPath );
+
+    /* SJ: CustomShapes that are available in the gallery are having the highest
+       priority, so we will take a look there before taking the internal default */
+
+    if ( GalleryExplorer::GetSdrObjCount( GALLERY_THEME_POWERPOINT ) )
+    {
+        std::vector< OUString > aObjList;
+        if ( GalleryExplorer::FillObjListTitle( GALLERY_THEME_POWERPOINT, aObjList ) )
+        {
+            for ( std::vector<OUString>::size_type i = 0; i < aObjList.size(); i++ )
+            {
+                if ( aObjList[ i ].equalsIgnoreAsciiCase( rCustomShape ) )
+                {
+                    FmFormModel aFormModel;
+                    SfxItemPool& rPool(aFormModel.GetItemPool());
+                    rPool.FreezeIdRanges();
+
+                    if ( GalleryExplorer::GetSdrObj( GALLERY_THEME_POWERPOINT, i, &aFormModel ) )
+                    {
+                        const SdrObject* pSourceObj = nullptr;
+                        if (aFormModel.GetPageCount() > 0)
+                            pSourceObj = aFormModel.GetPage( 0 )->GetObj( 0 );
+                        SAL_WARN_IF(!pSourceObj, "svx.form", "No content in gallery custom shape '" << rCustomShape << "'" );
+                        if( pSourceObj )
+                        {
+                            PropertyValue aPropVal_;
+                            const SdrCustomShapeGeometryItem& rSourceGeometry = pSourceObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY );
+                            const css::uno::Any* pAny = rSourceGeometry.GetPropertyValueByName( sType );
+                            if ( pAny )
+                            {
+                                aPropVal_.Name = sType;
+                                aPropVal_.Value = *pAny;
+                                rGeometryItem.SetPropertyValue( aPropVal_ );
+                            }
+                            pAny = rSourceGeometry.GetPropertyValueByName( sAdjustmentValues );
+                            if ( pAny )
+                            {
+                                aPropVal_.Name = sAdjustmentValues;
+                                aPropVal_.Value = *pAny;
+                                rGeometryItem.SetPropertyValue( aPropVal_ );
+                            }
+                            pAny = rSourceGeometry.GetPropertyValueByName( sCoordinateOrigin );
+                            if ( pAny )
+                            {
+                                aPropVal_.Name = sCoordinateOrigin;
+                                aPropVal_.Value = *pAny;
+                                rGeometryItem.SetPropertyValue( aPropVal_ );
+                            }
+                            pAny = rSourceGeometry.GetPropertyValueByName( sCoordinateSize );
+                            if ( pAny )
+                            {
+                                aPropVal_.Name = sCoordinateSize;
+                                aPropVal_.Value = *pAny;
+                                rGeometryItem.SetPropertyValue( aPropVal_ );
+                            }
+                            pAny = rSourceGeometry.GetPropertyValueByName( sEquations );
+                            if ( pAny )
+                            {
+                                aPropVal_.Name = sEquations;
+                                aPropVal_.Value = *pAny;
+                                rGeometryItem.SetPropertyValue( aPropVal_ );
+                            }
+                            pAny = rSourceGeometry.GetPropertyValueByName( sHandles );
+                            if ( pAny )
+                            {
+                                aPropVal_.Name = sHandles;
+                                aPropVal_.Value = *pAny;
+                                rGeometryItem.SetPropertyValue( aPropVal_ );
+                            }
+                            pAny = rSourceGeometry.GetPropertyValueByName( sPath );
+                            if ( pAny )
+                            {
+                                aPropVal_.Name = sPath;
+                                aPropVal_.Value = *pAny;
+                                rGeometryItem.SetPropertyValue( aPropVal_ );
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+
+void FontworkBar::execute( SdrView& rSdrView, SfxRequest const & rReq, SfxBindings& rBindings )
+{
+    const char* pStrResId = nullptr;
+
+    sal_uInt16 nSID = rReq.GetSlot();
+    switch( nSID )
+    {
+        case SID_FONTWORK_GALLERY_FLOATER:
+        {
+            FontWorkGalleryDialog aDlg(rReq.GetFrameWeld(), rSdrView);
+            aDlg.run();
+        }
+        break;
+
+        case SID_FONTWORK_SHAPE_TYPE:
+        {
+            OUString aCustomShape;
+            const SfxItemSet* pArgs = rReq.GetArgs();
+            if ( pArgs )
+            {
+                const SfxStringItem& rItm = static_cast<const SfxStringItem&>(pArgs->Get( rReq.GetSlot() ));
+                aCustomShape = rItm.GetValue();
+            }
+            if ( !aCustomShape.isEmpty() )
+            {
+                const SdrMarkList& rMarkList = rSdrView.GetMarkedObjectList();
+                const size_t nCount = rMarkList.GetMarkCount();
+                for( size_t i = 0; i < nCount; ++i )
+                {
+                    SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+                    if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+                    {
+                        const bool bUndo = rSdrView.IsUndoEnabled();
+
+                        if( bUndo )
+                        {
+                            OUString aStr( SvxResId( RID_SVXSTR_UNDO_APPLY_FONTWORK_SHAPE ) );
+                            rSdrView.BegUndo(aStr);
+                            rSdrView.AddUndo(rSdrView.GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj));
+                        }
+                        SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+                        GetGeometryForCustomShape( aGeometryItem, aCustomShape );
+                        pObj->SetMergedItem( aGeometryItem );
+
+                        Reference< drawing::XShape > aXShape = GetXShapeForSdrObject( static_cast<SdrObjCustomShape*>(pObj) );
+                        if ( aXShape.is() )
+                        {
+                            Reference< drawing::XEnhancedCustomShapeDefaulter > xDefaulter( aXShape, UNO_QUERY );
+                            if( xDefaulter.is() )
+                                xDefaulter->createCustomShapeDefaults( aCustomShape );
+                        }
+
+                        pObj->BroadcastObjectChange();
+                        if (bUndo)
+                            rSdrView.EndUndo();
+                        rSdrView.AdjustMarkHdl(); //HMH sal_True );
+                        rBindings.Invalidate( SID_FONTWORK_SHAPE_TYPE );
+                    }
+                }
+            }
+        }
+        break;
+
+        case SID_FONTWORK_CHARACTER_SPACING_DIALOG :
+        {
+            if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_CHARACTER_SPACING ) == SfxItemState::SET ) )
+            {
+                sal_Int32 nCharSpacing = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_FONTWORK_CHARACTER_SPACING)->GetValue();
+                FontworkCharacterSpacingDialog aDlg(rReq.GetFrameWeld(), nCharSpacing);
+                sal_uInt16 nRet = aDlg.run();
+                if (nRet != RET_CANCEL)
+                {
+                    SfxInt32Item aItem(SID_FONTWORK_CHARACTER_SPACING, aDlg.getScale());
+                    SfxPoolItem* aItems[] = { &aItem, nullptr };
+                    rBindings.Execute( SID_FONTWORK_CHARACTER_SPACING, const_cast<const SfxPoolItem**>(aItems) );
+                }
+            }
+        }
+        break;
+
+        case SID_FONTWORK_SHAPE:
+        case SID_FONTWORK_ALIGNMENT:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_ALIGNMENT;
+            [[fallthrough]];
+        }
+        case SID_FONTWORK_CHARACTER_SPACING:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_CHARACTER_SPACING;
+            [[fallthrough]];
+        }
+        case SID_FONTWORK_KERN_CHARACTER_PAIRS:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_CHARACTER_SPACING;
+            [[fallthrough]];
+        }
+        case SID_FONTWORK_SAME_LETTER_HEIGHTS:
+        {
+            if ( !pStrResId )
+                pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_SAME_LETTER_HEIGHT;
+
+            const SdrMarkList& rMarkList = rSdrView.GetMarkedObjectList();
+            const size_t nCount = rMarkList.GetMarkCount();
+            for( size_t i = 0; i < nCount; ++i )
+            {
+                SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+                if( dynamic_cast<const SdrObjCustomShape*>( pObj) !=  nullptr )
+                {
+                    const bool bUndo = rSdrView.IsUndoEnabled();
+                    if( bUndo )
+                    {
+                        OUString aStr( SvxResId( pStrResId ) );
+                        rSdrView.BegUndo(aStr);
+                        rSdrView.AddUndo(rSdrView.GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj));
+                    }
+                    SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+                    impl_execute( rReq, aGeometryItem, pObj );
+                    pObj->SetMergedItem( aGeometryItem );
+                    pObj->BroadcastObjectChange();
+                    if (bUndo)
+                        rSdrView.EndUndo();
+                }
+            }
+        }
+        break;
+    }
+}
+
+void FontworkBar::getState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+    sal_uInt32 nCheckStatus = 0;
+
+    if ( rSet.GetItemState( SID_FONTWORK_ALIGNMENT_FLOATER ) != SfxItemState::UNKNOWN )
+    {
+        if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+            rSet.DisableItem( SID_FONTWORK_ALIGNMENT_FLOATER );
+    }
+    if ( rSet.GetItemState( SID_FONTWORK_ALIGNMENT ) != SfxItemState::UNKNOWN )
+    {
+        if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+            rSet.DisableItem( SID_FONTWORK_ALIGNMENT );
+        else
+            SetAlignmentState( pSdrView, rSet );
+    }
+    if ( rSet.GetItemState( SID_FONTWORK_CHARACTER_SPACING_FLOATER ) != SfxItemState::UNKNOWN )
+    {
+        if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+            rSet.DisableItem( SID_FONTWORK_CHARACTER_SPACING_FLOATER );
+    }
+    if ( rSet.GetItemState( SID_FONTWORK_CHARACTER_SPACING ) != SfxItemState::UNKNOWN )
+    {
+        if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+            rSet.DisableItem( SID_FONTWORK_CHARACTER_SPACING );
+        else
+            SetCharacterSpacingState( pSdrView, rSet );
+    }
+    if ( rSet.GetItemState( SID_FONTWORK_KERN_CHARACTER_PAIRS ) != SfxItemState::UNKNOWN )
+    {
+        if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+            rSet.DisableItem( SID_FONTWORK_KERN_CHARACTER_PAIRS );
+        else
+            SetKernCharacterPairsState( pSdrView, rSet );
+    }
+    if ( rSet.GetItemState( SID_FONTWORK_SAME_LETTER_HEIGHTS ) != SfxItemState::UNKNOWN )
+    {
+        if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+            rSet.DisableItem( SID_FONTWORK_SAME_LETTER_HEIGHTS );
+    }
+    if ( rSet.GetItemState( SID_FONTWORK_SHAPE_TYPE ) != SfxItemState::UNKNOWN )
+    {
+        if ( !checkForSelectedFontWork( pSdrView, nCheckStatus  ) )
+            rSet.DisableItem( SID_FONTWORK_SHAPE_TYPE );
+        else
+            SetFontWorkShapeTypeState( pSdrView, rSet );
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */