diff options
Diffstat (limited to '')
| -rw-r--r-- | include/osl/file.hxx | 1947 |
1 files changed, 1947 insertions, 0 deletions
diff --git a/include/osl/file.hxx b/include/osl/file.hxx new file mode 100644 index 000000000..8a677e505 --- /dev/null +++ b/include/osl/file.hxx @@ -0,0 +1,1947 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#ifndef INCLUDED_OSL_FILE_HXX +#define INCLUDED_OSL_FILE_HXX + +#include "sal/config.h" + +#include <string.h> + +#include <cstddef> + +#include "sal/log.hxx" +#include "osl/time.h" +#include "rtl/ustring.hxx" + +#include "osl/file.h" +#include "osl/diagnose.h" + +namespace rtl { class ByteSequence; } + +namespace osl +{ + + +/** Base class for all File System specific objects. + + @see Directory + @see DirectoryItem + @see File + */ + +class FileBase +{ +public: + + enum RC { + E_None = osl_File_E_None, ///< on success + E_PERM = osl_File_E_PERM, ///< operation not permitted + E_NOENT = osl_File_E_NOENT, ///< no such file or directory + E_SRCH = osl_File_E_SRCH, ///< no process matches the PID + E_INTR = osl_File_E_INTR, ///< function call was interrupted + E_IO = osl_File_E_IO, ///< I/O error occurred + E_NXIO = osl_File_E_NXIO, ///< no such device or address + E_2BIG = osl_File_E_2BIG, ///< argument list too long + E_NOEXEC = osl_File_E_NOEXEC, ///< invalid executable file format + E_BADF = osl_File_E_BADF, ///< bad file descriptor + E_CHILD = osl_File_E_CHILD, ///< there are no child processes + E_AGAIN = osl_File_E_AGAIN, ///< resource temp unavailable, try again later + E_NOMEM = osl_File_E_NOMEM, ///< no memory available + E_ACCES = osl_File_E_ACCES, ///< file permissions do not allow operation + E_FAULT = osl_File_E_FAULT, ///< bad address; an invalid pointer detected + E_BUSY = osl_File_E_BUSY, ///< resource busy + E_EXIST = osl_File_E_EXIST, ///< file exists where should only be created + E_XDEV = osl_File_E_XDEV, ///< improper link across file systems detected + E_NODEV = osl_File_E_NODEV, ///< wrong device type specified + E_NOTDIR = osl_File_E_NOTDIR, ///< file isn't a directory where one is needed + E_ISDIR = osl_File_E_ISDIR, ///< file is a directory, invalid operation + E_INVAL = osl_File_E_INVAL, ///< invalid argument to library function + E_NFILE = osl_File_E_NFILE, ///< too many distinct file openings + E_MFILE = osl_File_E_MFILE, ///< process has too many distinct files open + E_NOTTY = osl_File_E_NOTTY, ///< inappropriate I/O control operation + E_FBIG = osl_File_E_FBIG, ///< file too large + E_NOSPC = osl_File_E_NOSPC, ///< no space left on device, write failed + E_SPIPE = osl_File_E_SPIPE, ///< invalid seek operation (such as on pipe) + E_ROFS = osl_File_E_ROFS, ///< illegal modification to read-only filesystem + E_MLINK = osl_File_E_MLINK, ///< too many links to file + E_PIPE = osl_File_E_PIPE, ///< broken pipe; no process reading from other end of pipe + E_DOM = osl_File_E_DOM, ///< domain error (mathematical error) + E_RANGE = osl_File_E_RANGE, ///< range error (mathematical error) + E_DEADLK = osl_File_E_DEADLK, ///< deadlock avoided + E_NAMETOOLONG = osl_File_E_NAMETOOLONG, ///< filename too long + E_NOLCK = osl_File_E_NOLCK, ///< no locks available + E_NOSYS = osl_File_E_NOSYS, ///< function not implemented + E_NOTEMPTY = osl_File_E_NOTEMPTY, ///< directory not empty + E_LOOP = osl_File_E_LOOP, ///< too many levels of symbolic links found during name lookup + E_ILSEQ = osl_File_E_ILSEQ, ///< invalid or incomplete byte sequence of multibyte char found + E_NOLINK = osl_File_E_NOLINK, ///< link has been severed + E_MULTIHOP = osl_File_E_MULTIHOP, ///< remote resource is not directly available + E_USERS = osl_File_E_USERS, ///< file quote system is confused as there are too many users + E_OVERFLOW = osl_File_E_OVERFLOW, ///< value too large for defined data type + E_NOTREADY = osl_File_E_NOTREADY, ///< device not ready + E_invalidError = osl_File_E_invalidError, ///< unmapped error: always last entry in enum! + E_TIMEDOUT = osl_File_E_TIMEDOUT, ///< socket operation timed out + E_NETWORK = osl_File_E_NETWORK + }; + + +public: + + /** Determine a valid unused canonical name for a requested name. + + Determines a valid unused canonical name for a requested name. + Depending on the Operating System and the File System the illegal characters are replaced by valid ones. + If a file or directory with the requested name already exists a new name is generated following + the common rules on the actual Operating System and File System. + + @param[in] ustrRequestedURL + Requested name of a file or directory. + + @param[out] ustrValidURL + On success receives a name which is unused and valid on the actual Operating System and + File System. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + + @see DirectoryItem::getFileStatus() + */ + + static RC getCanonicalName( const ::rtl::OUString& ustrRequestedURL, ::rtl::OUString& ustrValidURL ) + { + return static_cast< RC >( osl_getCanonicalName( ustrRequestedURL.pData, &ustrValidURL.pData ) ); + } + + /** Convert a path relative to a given directory into an full qualified file URL. + + Convert a path relative to a given directory into an full qualified file URL. + The function resolves symbolic links if possible and path ellipses, so on success + the resulting absolute path is fully resolved. + + @param[in] ustrBaseDirectoryURL + Base directory URL to which the relative path is related to. + + @param[in] ustrRelativeFileURL + A URL of a file or directory relative to the directory path specified by ustrBaseDirectoryURL + or an absolute path. + If ustrRelativeFileURL denotes an absolute path ustrBaseDirectoryURL will be ignored. + + @param[out] ustrAbsoluteFileURL + On success it receives the full qualified absolute file URL. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_NOTDIR not a directory + @retval E_ACCES permission denied + @retval E_NOENT no such file or directory + @retval E_NAMETOOLONG file name too long + @retval E_OVERFLOW value too large for defined data type + @retval E_FAULT bad address + @retval E_INTR function call was interrupted + @retval E_LOOP too many symbolic links encountered + @retval E_MULTIHOP multihop attempted + @retval E_NOLINK link has been severed + + @see DirectoryItem::getFileStatus() + */ + + static RC getAbsoluteFileURL( const ::rtl::OUString& ustrBaseDirectoryURL, const ::rtl::OUString& ustrRelativeFileURL, ::rtl::OUString& ustrAbsoluteFileURL ) + { + return static_cast< RC >( osl_getAbsoluteFileURL( ustrBaseDirectoryURL.pData, ustrRelativeFileURL.pData, &ustrAbsoluteFileURL.pData ) ); + } + + /** Convert a file URL into a system dependent path. + + @param[in] ustrFileURL + A File URL. + + @param[out] ustrSystemPath + On success it receives the system path. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + + @see getFileURLFromSystemPath() + */ + + static RC getSystemPathFromFileURL( const ::rtl::OUString& ustrFileURL, ::rtl::OUString& ustrSystemPath ) + { + return static_cast< RC >( osl_getSystemPathFromFileURL( ustrFileURL.pData, &ustrSystemPath.pData ) ); + } + + /** Convert a system dependent path into a file URL. + + @param[in] ustrSystemPath + A System dependent path of a file or directory. + + @param[out] ustrFileURL + On success it receives the file URL. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + + @see getSystemPathFromFileURL() + */ + + static RC getFileURLFromSystemPath( const ::rtl::OUString& ustrSystemPath, ::rtl::OUString& ustrFileURL ) + { + return static_cast< RC >( osl_getFileURLFromSystemPath( ustrSystemPath.pData, &ustrFileURL.pData ) ); + } + + /** Search a full qualified system path or a file URL. + + @param[in] ustrFileName + A system dependent path, a file URL, a file or relative directory + + @param[in] ustrSearchPath + A list of system paths, in which a given file has to be searched. The Notation of a path list is + system dependent, e.g. on UNIX system "/usr/bin:/bin" and on Windows "C:\BIN;C:\BATCH". + These paths are only for the search of a file or a relative path, otherwise it will be ignored. + If ustrSearchPath is NULL or while using the search path the search failed, the function searches for + a matching file in all system directories and in the directories listed in the PATH environment + variable. + The value of an environment variable should be used (e.g. LD_LIBRARY_PATH) if the caller is not + aware of the Operating System and so doesn't know which path list delimiter to use. + + @param[out] ustrFileURL + On success it receives the full qualified file URL. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOTDIR not a directory + @retval E_NOENT no such file or directory not found + + @see getFileURLFromSystemPath() + @see getSystemPathFromFileURL() + */ + + static RC searchFileURL( const ::rtl::OUString& ustrFileName, const ::rtl::OUString& ustrSearchPath, ::rtl::OUString& ustrFileURL ) + { + return static_cast< RC >( osl_searchFileURL( ustrFileName.pData, ustrSearchPath.pData, &ustrFileURL.pData ) ); + } + + /** Retrieves the file URL of the system's temporary directory path. + + @param[out] ustrTempDirURL + On success receives the URL of system's temporary directory path. + + @retval E_None on success + @retval E_NOENT no such file or directory not found + */ + + static RC getTempDirURL( ::rtl::OUString& ustrTempDirURL ) + { + return static_cast< RC >( osl_getTempDirURL( &ustrTempDirURL.pData ) ); + } + + /** Creates a temporary file in the directory provided by the caller or the + directory returned by getTempDirURL. + Under UNIX Operating Systems the file will be created with read and write + access for the user exclusively. + If the caller requests only a handle to the open file but not the name of + it, the file will be automatically removed on close else the caller is + responsible for removing the file on success.<br><br> + + @param[in] pustrDirectoryURL + Specifies the full qualified URL where the temporary file should be created. + If pustrDirectoryURL is 0 the path returned by osl_getTempDirURL will be used. + + @param[out] pHandle + On success receives a handle to the open file. + If pHandle is 0 the file will be closed on return, in this case + pustrTempFileURL must not be 0. + + @param[out] pustrTempFileURL + On success receives the full qualified URL of the temporary file. + If pustrTempFileURL is 0 the file will be automatically removed + on close, in this case pHandle must not be 0. + If pustrTempFileURL is not 0 the caller receives the name of the + created file and is responsible for removing the file. + + Description of the different pHandle, ppustrTempFileURL parameter combinations. + pHandle is 0 and pustrTempDirURL is 0 - this combination is invalid<br> + pHandle is not 0 and pustrTempDirURL is 0 - a handle to the open file + will be returned on success and the file will be automatically removed on close<br> + pHandle is 0 and pustrTempDirURL is not 0 - the name of the file will be + returned, the caller is responsible for opening, closing and removing the file.<br> + pHandle is not 0 and pustrTempDirURL is not 0 - a handle to the open file as well as + the file name will be returned, the caller is responsible for closing and removing + the file.<br> + + @retval E_None on success + @retval E_INVAL the format of the parameter is invalid + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES Permission denied + @retval E_NOENT No such file or directory + @retval E_NOTDIR Not a directory + @retval E_ROFS Read-only file system + @retval E_NOSPC No space left on device + @retval E_DQUOT Quota exceeded + + @see getTempDirURL() + */ + + static RC createTempFile( + ::rtl::OUString* pustrDirectoryURL, + oslFileHandle* pHandle, + ::rtl::OUString* pustrTempFileURL) + { + rtl_uString* pustr_dir_url = pustrDirectoryURL ? pustrDirectoryURL->pData : NULL; + rtl_uString** ppustr_tmp_file_url = pustrTempFileURL ? &pustrTempFileURL->pData : NULL; + + return static_cast< RC >( osl_createTempFile(pustr_dir_url, pHandle, ppustr_tmp_file_url) ); + } +}; + + +/** The VolumeDevice class. + + @see VolumeInfo +*/ + +class VolumeDevice : public FileBase +{ + oslVolumeDeviceHandle _aHandle; + +public: + + /** Constructor. + */ + + VolumeDevice() : _aHandle( NULL ) + { + } + + /** Copy constructor. + + @param rDevice + The other volume device. + */ + + VolumeDevice( const VolumeDevice & rDevice ) + { + _aHandle = rDevice._aHandle; + if ( _aHandle ) + osl_acquireVolumeDeviceHandle( _aHandle ); + } + + /** Destructor. + */ + + ~VolumeDevice() + { + if ( _aHandle ) + osl_releaseVolumeDeviceHandle( _aHandle ); + } + + /** Assignment operator. + + @param rDevice + The other volume device. + */ + + VolumeDevice & operator =( const VolumeDevice & rDevice ) + { + oslVolumeDeviceHandle newHandle = rDevice._aHandle; + + if ( newHandle ) + osl_acquireVolumeDeviceHandle( newHandle ); + + if ( _aHandle ) + osl_releaseVolumeDeviceHandle( _aHandle ); + + _aHandle = newHandle; + + return *this; + } + + /** Get the full qualified URL where a device is mounted to. + + @return + The full qualified URL where the device is mounted to. + */ + rtl::OUString getMountPath() + { + rtl::OUString aPath; + osl_getVolumeDeviceMountPath( _aHandle, &aPath.pData ); + return aPath; + } + + friend class VolumeInfo; +}; + + +class Directory; + +/** The VolumeInfo class. + + Neither copy nor assignment is allowed for this class. + + @see Directory::getVolumeInfo +*/ + + +class VolumeInfo +{ + oslVolumeInfo _aInfo; + sal_uInt32 _nMask; + VolumeDevice _aDevice; + + /** Copy constructor. + */ + + VolumeInfo( VolumeInfo& ) SAL_DELETED_FUNCTION; + + /** Assignment operator. + */ + + VolumeInfo& operator = ( VolumeInfo& ) SAL_DELETED_FUNCTION; + +public: + + /** Constructor. + + @param nMask + Set of flags describing the demanded information. + */ + VolumeInfo( sal_uInt32 nMask ) + : _nMask( nMask ) + { + memset( &_aInfo, 0, sizeof( oslVolumeInfo )); + _aInfo.uStructSize = sizeof( oslVolumeInfo ); + _aInfo.pDeviceHandle = &_aDevice._aHandle; + } + + ~VolumeInfo() + { + if( _aInfo.ustrFileSystemName ) + rtl_uString_release( _aInfo.ustrFileSystemName ); + } + + /** Check if specified fields are valid. + + @param nMask + Set of flags for the fields to check. + + @return true if all fields are valid else false. + */ + bool isValid( sal_uInt32 nMask ) const + { + return ( nMask & _aInfo.uValidFields ) == nMask; + } + + /** Check the remote flag. + + @return + true if Attributes are valid and the volume is remote else false. + */ + bool getRemoteFlag() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_Remote) != 0; + } + + /** Check the removable flag. + + @return + true if attributes are valid and the volume is removable else false. + */ + bool getRemoveableFlag() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_Removeable) != 0; + } + + /** Check the compact disc flag. + + @return + true if attributes are valid and the volume is a CDROM else false. + */ + + bool getCompactDiscFlag() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_CompactDisc) != 0; + } + + /** Check the floppy disc flag. + + @return + true if attributes are valid and the volume is a floppy disk else false. + */ + + bool getFloppyDiskFlag() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_FloppyDisk) != 0; + } + + /** Check the fixed disk flag. + + @return + true if attributes are valid and the volume is a fixed disk else false. + */ + + bool getFixedDiskFlag() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_FixedDisk) != 0; + } + + /** Check the RAM disk flag. + + @return + true if attributes are valid and the volume is a RAM disk else false. + */ + + bool getRAMDiskFlag() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_RAMDisk) != 0; + } + + /** Determine the total space of a volume device. + + @return + The total diskspace of this volume if this information is valid, + 0 otherwise. + */ + + sal_uInt64 getTotalSpace() const + { + return _aInfo.uTotalSpace; + } + + /** Determine the free space of a volume device. + + @return + The free diskspace of this volume if this information is valid, + 0 otherwise. + */ + + sal_uInt64 getFreeSpace() const + { + return _aInfo.uFreeSpace; + } + + /** Determine the used space of a volume device. + + @return + The used diskspace of this volume if this information is valid, + 0 otherwise. + */ + + sal_uInt64 getUsedSpace() const + { + return _aInfo.uUsedSpace; + } + + /** Determine the maximal length of a file name. + + @return + The maximal length of a file name if this information is valid, + 0 otherwise. + */ + + sal_uInt32 getMaxNameLength() const + { + return _aInfo.uMaxNameLength; + } + + /** Determine the maximal length of a path name. + + @return + The maximal length of a path if this information is valid, + 0 otherwise. + */ + + sal_uInt32 getMaxPathLength() const + { + return _aInfo.uMaxPathLength; + } + + /** Determine the name of the volume device's File System. + + @return + The name of the volume's filesystem if this information is valid, + otherwise an empty string. + */ + + ::rtl::OUString getFileSystemName() const + { + return _aInfo.ustrFileSystemName ? ::rtl::OUString( _aInfo.ustrFileSystemName ) : ::rtl::OUString(); + } + + + /** Get the volume device handle. + + @return + The device handle of the volume if this information is valid, + otherwise returns NULL; + */ + + VolumeDevice getDeviceHandle() const + { + return _aDevice; + } + + /** Return whether the file system is case sensitive or + case insensitive + + @return + true if the file system is case sensitive false otherwise + */ + bool isCaseSensitiveFileSystem() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_Case_Sensitive) != 0; + } + + /** Return whether the file system preserves the case of + file and directory names or not + + @return + true if the file system preserves the case of file and + directory names false otherwise + */ + bool isCasePreservingFileSystem() const + { + return (_aInfo.uAttributes & osl_Volume_Attribute_Case_Is_Preserved) != 0; + } + + friend class Directory; +}; + + +class DirectoryItem; + +/** The FileStatus class. + + @see DirectoryItem::getFileStatus +*/ + +class FileStatus +{ + oslFileStatus _aStatus; + sal_uInt32 _nMask; + + /** Copy constructor. + */ + + FileStatus( FileStatus& ) SAL_DELETED_FUNCTION; + + /** Assignment operator. + */ + + FileStatus& operator = ( FileStatus& ) SAL_DELETED_FUNCTION; + +public: + + enum Type { + Directory = osl_File_Type_Directory, + Volume = osl_File_Type_Volume, + Regular = osl_File_Type_Regular, + Fifo = osl_File_Type_Fifo, + Socket = osl_File_Type_Socket, + Link = osl_File_Type_Link, + Special = osl_File_Type_Special, + Unknown = osl_File_Type_Unknown + }; + + /** Constructor. + + @param nMask + Set of flags describing the demanded information. + */ + FileStatus(sal_uInt32 nMask) + : _nMask(nMask) + { + memset(&_aStatus, 0, sizeof(_aStatus)); + _aStatus.uStructSize = sizeof(_aStatus); + } + + /** Destructor. + */ + ~FileStatus() + { + if ( _aStatus.ustrFileURL ) + rtl_uString_release( _aStatus.ustrFileURL ); + if ( _aStatus.ustrLinkTargetURL ) + rtl_uString_release( _aStatus.ustrLinkTargetURL ); + if ( _aStatus.ustrFileName ) + rtl_uString_release( _aStatus.ustrFileName ); + } + + /** Check if specified fields are valid. + + @param nMask + Set of flags for the fields to check. + + @return + true if all fields are valid else false. + */ + + bool isValid( sal_uInt32 nMask ) const + { + return ( nMask & _aStatus.uValidFields ) == nMask; + } + + /** Get the file type. + + @return + The file type. + */ + Type getFileType() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_Type), "sal.osl", + "no FileStatus Type determined"); + return isValid(osl_FileStatus_Mask_Type) + ? static_cast< Type >(_aStatus.eType) : Unknown; + } + + /** Is it a directory? + This method returns True for both directories, and volumes. + + @return + True if it's a directory, False otherwise. + + @see getFileType + @since LibreOffice 3.6 + */ + bool isDirectory() const + { + return ( getFileType() == Directory || getFileType() == Volume ); + } + + /** Is it a regular file? + + @return + True if it's a regular file, False otherwise. + + @see getFileType + @see isFile + @see isLink + @since LibreOffice 3.6 + */ + bool isRegular() const + { + return ( getFileType() == Regular ); + } + + /** Is it a link? + + @return + True if it's a link, False otherwise. + + @see getFileType + @since LibreOffice 3.6 + */ + bool isLink() const + { + return ( getFileType() == Link ); + } + + /** Get the file attributes. + + @return + The set of attribute flags of this file. + */ + + sal_uInt64 getAttributes() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_Attributes), "sal.osl", + "no FileStatus Attributes determined"); + return _aStatus.uAttributes; + } + + /** Get the creation time of this file. + + @return + The creation time if this information is valid, an uninitialized + TimeValue otherwise. + */ + + TimeValue getCreationTime() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_CreationTime), "sal.osl", + "no FileStatus CreationTime determined"); + return _aStatus.aCreationTime; + } + + /** Get the file access time. + + @return + The last access time if this information is valid, an uninitialized + TimeValue otherwise. + */ + + TimeValue getAccessTime() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_AccessTime), "sal.osl", + "no FileStatus AccessTime determined"); + return _aStatus.aAccessTime; + } + + /** Get the file modification time. + + @return + The last modified time if this information is valid, an uninitialized + TimeValue otherwise. + */ + + TimeValue getModifyTime() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_ModifyTime), "sal.osl", + "no FileStatus ModifyTime determined"); + return _aStatus.aModifyTime; + } + + /** Get the size of the file. + + @return + The actual file size if this information is valid, 0 otherwise. + */ + + sal_uInt64 getFileSize() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_FileSize), "sal.osl", + "no FileStatus FileSize determined"); + return _aStatus.uFileSize; + } + + /** Get the file name. + + @return + The file name if this information is valid, an empty string otherwise. + */ + + ::rtl::OUString getFileName() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_FileName), "sal.osl", + "no FileStatus FileName determined"); + return isValid(osl_FileStatus_Mask_FileName) + ? rtl::OUString(_aStatus.ustrFileName) : rtl::OUString(); + } + + + /** Get the URL of the file. + + @return + The full qualified URL of the file if this information is valid, an + empty string otherwise. + */ + + ::rtl::OUString getFileURL() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_FileURL), "sal.osl", + "no FileStatus FileURL determined"); + return isValid(osl_FileStatus_Mask_FileURL) + ? rtl::OUString(_aStatus.ustrFileURL) : rtl::OUString(); + } + + /** Get the link target URL. + + @return + The link target URL if this information is valid, an empty string + otherwise. + */ + + ::rtl::OUString getLinkTargetURL() const + { + SAL_INFO_IF( + !isValid(osl_FileStatus_Mask_LinkTargetURL), "sal.osl", + "no FileStatus LinkTargetURL determined"); + return isValid(osl_FileStatus_Mask_LinkTargetURL) + ? rtl::OUString(_aStatus.ustrLinkTargetURL) : rtl::OUString(); + } + + friend class DirectoryItem; +}; + + +/** The file class object provides access to file contents and attributes. + + @see Directory + @see DirectoryItem + */ + +class File: public FileBase +{ + oslFileHandle _pData; + ::rtl::OUString _aPath; + + /** Copy constructor. + */ + + File( File& ) SAL_DELETED_FUNCTION; + + /** Assignment operator. + */ + + File& operator = ( File& ) SAL_DELETED_FUNCTION; + +public: + + /** Constructor. + + @param[in] ustrFileURL + The full qualified URL of the file. Relative paths are not allowed. + */ + + File( const ::rtl::OUString& ustrFileURL ): _pData( NULL ), _aPath( ustrFileURL ) {} + + /** Destructor + */ + + ~File() + { + close(); + } + + /** Obtain the URL. + + @return + the URL with which this File instance was created. + + @since LibreOffice 4.1 + */ + rtl::OUString getURL() const { return _aPath; } + + /** Open a regular file. + + Open a file. Only regular files can be opened. + + @param[in] uFlags + Specifies the open mode. + + @retval E_None on success + @retval E_NOMEM not enough memory for allocating structures + @retval E_INVAL the format of the parameters was not valid + @retval E_NAMETOOLONG pathname was too long + @retval E_NOENT no such file or directory + @retval E_ACCES permission denied + @retval E_AGAIN a write lock could not be established + @retval E_NOTDIR not a directory + @retval E_NXIO no such device or address + @retval E_NODEV no such device + @retval E_ROFS read-only file system + @retval E_TXTBSY text file busy + @retval E_FAULT bad address + @retval E_LOOP too many symbolic links encountered + @retval E_NOSPC no space left on device + @retval E_ISDIR is a directory + @retval E_MFILE too many open files used by the process + @retval E_NFILE too many open files in the system + @retval E_DQUOT quota exceeded + @retval E_EXIST file exists + @retval E_INTR function call was interrupted + @retval E_IO on I/O errors + @retval E_MULTIHOP multihop attempted + @retval E_NOLINK link has been severed + @retval E_EOVERFLOW value too large for defined data type + + @see close() + @see setPos() + @see getPos() + @see read() + @see write() + @see getSize() + @see setSize() + */ + + RC open( sal_uInt32 uFlags ) + { + return static_cast< RC >( osl_openFile( _aPath.pData, &_pData, uFlags ) ); + } + + /** Close an open file. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_BADF Bad file + @retval E_INTR function call was interrupted + @retval E_NOLINK link has been severed + @retval E_NOSPC no space left on device + @retval E_IO on I/O errors + + @see open() + */ + + RC close() + { + oslFileError Error = osl_File_E_BADF; + + if( _pData ) + { + Error=osl_closeFile( _pData ); + _pData = NULL; + } + + return static_cast< RC >( Error ); + } + + /** Set the internal position pointer of an open file. + + @param[in] uHow + Distance to move the internal position pointer (from uPos). + + @param[in] uPos + Absolute position from the beginning of the file. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files + + @see open() + @see getPos() + */ + + SAL_WARN_UNUSED_RESULT RC setPos( sal_uInt32 uHow, sal_Int64 uPos ) + { + return static_cast< RC >( osl_setFilePos( _pData, uHow, uPos ) ); + } + + /** Retrieve the current position of the internal pointer of an open file. + + @param[out] uPos + On success receives the current position of the file pointer. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files + + @see open() + @see setPos() + @see read() + @see write() + */ + + RC getPos( sal_uInt64& uPos ) + { + return static_cast< RC >( osl_getFilePos( _pData, &uPos ) ); + } + + /** Test if the end of a file is reached. + + @param[out] pIsEOF + Points to a variable that receives the end-of-file status. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_INTR function call was interrupted + @retval E_IO on I/O errors + @retval E_ISDIR is a directory + @retval E_BADF bad file + @retval E_FAULT bad address + @retval E_AGAIN operation would block + @retval E_NOLINK link has been severed + + @see open() + @see read() + @see readLine() + @see setPos() + */ + + RC isEndOfFile( sal_Bool *pIsEOF ) + { + return static_cast< RC >( osl_isEndOfFile( _pData, pIsEOF ) ); + } + + /** Set the file size of an open file. + + Sets the file size of an open file. The file can be truncated or enlarged by the function. + The position of the file pointer is not affeced by this function. + + @param[in] uSize + New size in bytes. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files + + @see open() + @see setPos() + @see getStatus() + */ + + RC setSize( sal_uInt64 uSize ) + { + return static_cast< RC >( osl_setFileSize( _pData, uSize ) ); + } + + /** Get the file size of an open file. + + Gets the file size of an open file. + The position of the file pointer is not affeced by this function. + + @param[out] rSize + Current size in bytes. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_OVERFLOW the resulting file offset would be a value which cannot be represented correctly for regular files + + @see open() + @see setPos() + @see getSize() + @see setSize() + @see getStatus() + */ + + RC getSize( sal_uInt64 &rSize ) + { + return static_cast< RC >( osl_getFileSize( _pData, &rSize ) ); + } + + /** Read a number of bytes from a file. + + Reads a number of bytes from a file. The internal file pointer is + increased by the number of bytes read. + + @param[out] pBuffer + Points to a buffer which receives data. The buffer must be large enough + to hold uBytesRequested bytes. + + @param[in] uBytesRequested + Number of bytes which should be retrieved. + + @param[out] rBytesRead + On success the number of bytes which have actually been retrieved. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_INTR function call was interrupted + @retval E_IO on I/O errors + @retval E_ISDIR is a directory + @retval E_BADF bad file + @retval E_FAULT bad address + @retval E_AGAIN operation would block + @retval E_NOLINK link has been severed + + @see open() + @see write() + @see readLine() + @see setPos() + */ + + RC read( void *pBuffer, sal_uInt64 uBytesRequested, sal_uInt64& rBytesRead ) + { + return static_cast< RC >( osl_readFile( _pData, pBuffer, uBytesRequested, &rBytesRead ) ); + } + + /** Write a number of bytes to a file. + + Writes a number of bytes to a file. + The internal file pointer is increased by the number of bytes read. + + @param[in] pBuffer + Points to a buffer which contains the data. + + @param[in] uBytesToWrite + Number of bytes which should be written. + + @param[out] rBytesWritten + On success the number of bytes which have actually been written. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_FBIG file too large + @retval E_DQUOT quota exceeded + @retval E_AGAIN operation would block + @retval E_BADF bad file + @retval E_FAULT bad address + @retval E_INTR function call was interrupted + @retval E_IO on I/O errosr + @retval E_NOLCK no record locks available + @retval E_NOLINK link has been severed + @retval E_NOSPC no space left on device + @retval E_NXIO no such device or address + + @see open() + @see read() + @see setPos() + */ + + RC write(const void *pBuffer, sal_uInt64 uBytesToWrite, sal_uInt64& rBytesWritten) + { + return static_cast< RC >( osl_writeFile( _pData, pBuffer, uBytesToWrite, &rBytesWritten ) ); + } + + + /** Read a line from a file. + + Reads a line from a file. The new line delimiter is NOT returned! + + @param[in,out] aSeq + A reference to a ::rtl::ByteSequence that will hold the line read on success. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_INTR function call was interrupted + @retval E_IO on I/O errors + @retval E_ISDIR is a directory + @retval E_BADF bad file + @retval E_FAULT bad address + @retval E_AGAIN operation would block + @retval E_NOLINK link has been severed + + @see open() + @see read() + @see write() + @see setPos() + */ + + RC readLine( ::rtl::ByteSequence& aSeq ) + { + return static_cast< RC >( osl_readLine( _pData, reinterpret_cast<sal_Sequence**>(&aSeq) ) ); + } + + /** Synchronize the memory representation of a file with that on the physical medium. + + The function ensures that all modified data and attributes of the file associated with + the given file handle have been written to the physical medium. + In case the hard disk has a write cache enabled, the data may not really be on + permanent storage when osl_syncFile returns. + + @retval E_None On success + @retval E_INVAL The value of the input parameter is invalid + @retval E_BADF The file is not open for writing + @retval E_IO An I/O error occurred + @retval E_NOSPC There is no enough space on the target device + @retval E_ROFS The file is located on a read only file system + @retval E_TIMEDOUT A remote connection timed out. This may happen when a file is on a remote location + + @see osl_syncFile() + @see open() + @see write() + */ + RC sync() const + { + OSL_PRECOND(_pData, "File::sync(): File not open"); + return static_cast< RC >(osl_syncFile(_pData)); + } + + /** Copy a file to a new destination. + + Copies a file to a new destination. Copies only files not directories. + No assumptions should be made about preserving attributes or file time. + + @param[in] ustrSourceFileURL + Full qualified URL of the source file. + + @param[in] ustrDestFileURL + Full qualified URL of the destination file. A directory is NOT a valid destination file! + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES permission denied + @retval E_PERM operation not permitted + @retval E_NAMETOOLONG file name too long + @retval E_NOENT no such file or directory + @retval E_ISDIR is a directory + @retval E_ROFS read-only file system + + @see move() + @see remove() + */ + + static RC copy( const ::rtl::OUString& ustrSourceFileURL, const ::rtl::OUString& ustrDestFileURL ) + { + return static_cast< RC >( osl_copyFile( ustrSourceFileURL.pData, ustrDestFileURL.pData ) ); + } + + /** Move a file or directory to a new destination or renames it. + + Moves a file or directory to a new destination or renames it. + File time and attributes are preserved. + + @param[in] ustrSourceFileURL + Full qualified URL of the source file. + + @param[in] ustrDestFileURL + Full qualified URL of the destination file. An existing directory is NOT a valid destination ! + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES permission denied + @retval E_PERM operation not permitted + @retval E_NAMETOOLONG file name too long + @retval E_NOENT no such file or directory + @retval E_ROFS read-only file system + + @see copy() + */ + + static RC move( const ::rtl::OUString& ustrSourceFileURL, const ::rtl::OUString& ustrDestFileURL ) + { + return static_cast< RC >( osl_moveFile( ustrSourceFileURL.pData, ustrDestFileURL.pData ) ); + } + + /** Move a file to a new destination or rename it, taking old file's identity (if exists). + + Moves or renames a file, replacing an existing file if exist. If the old file existed, + moved file's metadata, e.g. creation time (on FSes which keep files' creation time) or + ACLs, are set to old one's (to keep the old file's identity) - currently this is only + implemented fully on Windows; on other platforms, this is mostly equivalent to osl_moveFile. + + @param[in] ustrSourceFileURL + Full qualified URL of the source file. + + @param[in] ustrDestFileURL + Full qualified URL of the destination file. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES permission denied + @retval E_PERM operation not permitted + @retval E_NAMETOOLONG file name too long + @retval E_NOENT no such file + @retval E_ROFS read-only file system + @retval E_BUSY device or resource busy + + @see move() + + @since LibreOffice 6.2 + */ + static RC replace(const ::rtl::OUString& ustrSourceFileURL, + const ::rtl::OUString& ustrDestFileURL) + { + return static_cast<RC>(osl_replaceFile(ustrSourceFileURL.pData, ustrDestFileURL.pData)); + } + + /** Remove a regular file. + + @param[in] ustrFileURL + Full qualified URL of the file to remove. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES permission denied + @retval E_PERM operation not permitted + @retval E_NAMETOOLONG file name too long + @retval E_NOENT no such file or directory + @retval E_ISDIR is a directory + @retval E_ROFS read-only file system + @retval E_FAULT bad address + @retval E_LOOP too many symbolic links encountered + @retval E_IO on I/O errors + @retval E_BUSY device or resource busy + @retval E_INTR function call was interrupted + @retval E_MULTIHOP multihop attempted + @retval E_NOLINK link has been severed + @retval E_TXTBSY text file busy + + @see open() + */ + + static RC remove( const ::rtl::OUString& ustrFileURL ) + { + return static_cast< RC >( osl_removeFile( ustrFileURL.pData ) ); + } + + /** Set file attributes. + + @param[in] ustrFileURL + The full qualified file URL. + + @param[in] uAttributes + Attributes of the file to be set. + + @return + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + + @see FileStatus + */ + + static RC setAttributes( const ::rtl::OUString& ustrFileURL, sal_uInt64 uAttributes ) + { + return static_cast< RC >( osl_setFileAttributes( ustrFileURL.pData, uAttributes ) ); + } + + /** Set the file time. + + @param[in] ustrFileURL + The full qualified URL of the file. + + @param[in] rCreationTime + Creation time of the given file. + + @param[in] rLastAccessTime + Time of the last access of the given file. + + @param[in] rLastWriteTime + Time of the last modifying of the given file. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOENT no such file or directory not found + + @see FileStatus + */ + + static RC setTime( + const ::rtl::OUString& ustrFileURL, + const TimeValue& rCreationTime, + const TimeValue& rLastAccessTime, + const TimeValue& rLastWriteTime ) + { + return static_cast< RC >( osl_setFileTime( + ustrFileURL.pData, + &rCreationTime, + &rLastAccessTime, + &rLastWriteTime ) ); + } + + friend class DirectoryItem; +}; + + +/** The directory item class object provides access to file status information. + + @see FileStatus + */ + +class DirectoryItem: public FileBase +{ + oslDirectoryItem _pData; + +public: + + /** Constructor. + */ + + DirectoryItem(): _pData( NULL ) + { + } + + /** Copy constructor. + */ + + DirectoryItem( const DirectoryItem& rItem ): _pData( rItem._pData) + { + if( _pData ) + osl_acquireDirectoryItem( _pData ); + } + + /** Destructor. + */ + + ~DirectoryItem() + { + if( _pData ) + osl_releaseDirectoryItem( _pData ); + } + + /** Assignment operator. + */ + + DirectoryItem& operator=(const DirectoryItem& rItem ) + { + if (&rItem != this) + { + if( _pData ) + osl_releaseDirectoryItem( _pData ); + + _pData = rItem._pData; + + if( _pData ) + osl_acquireDirectoryItem( _pData ); + } + return *this; + } + + /** Check for validity of this instance. + + @return + true if object is valid directory item else false. + */ + + bool is() + { + return _pData != NULL; + } + + /** Retrieve a single directory item. + + Retrieves a single directory item. The returned handle has an initial refcount of 1. + Due to performance issues it is not recommended to use this function while + enumerating the contents of a directory. In this case use osl_getNextDirectoryItem() instead. + + @param[in] ustrFileURL + An absolute file URL. + + @param[out] rItem + On success it receives a handle which can be used for subsequent calls to osl_getFileStatus(). + The handle has to be released by a call to osl_releaseDirectoryItem(). + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES permission denied + @retval E_MFILE too many open files used by the process + @retval E_NFILE too many open files in the system + @retval E_NOENT no such file or directory + @retval E_LOOP too many symbolic links encountered + @retval E_NAMETOOLONG the file name is too long + @retval E_NOTDIR a component of the path prefix of path is not a directory + @retval E_IO on I/O errors + @retval E_MULTIHOP multihop attempted + @retval E_NOLINK link has been severed + @retval E_FAULT bad address + @retval E_INTR the function call was interrupted + + @see FileStatus + @see Directory::getNextItem() + */ + + static RC get( const ::rtl::OUString& ustrFileURL, DirectoryItem& rItem ) + { + if( rItem._pData) + { + osl_releaseDirectoryItem( rItem._pData ); + rItem._pData = NULL; + } + + return static_cast< RC >( osl_getDirectoryItem( ustrFileURL.pData, &rItem._pData ) ); + } + + /** Retrieve information about a single file or directory. + + @param[in,out] rStatus + Reference to a class which receives the information of the file or directory + represented by this directory item. + + @retval E_None on success + @retval E_NOMEM not enough memory for allocating structures + @retval E_INVAL the format of the parameters was not valid + @retval E_LOOP too many symbolic links encountered + @retval E_ACCES permission denied + @retval E_NOENT no such file or directory + @retval E_NAMETOOLONG file name too long + @retval E_BADF invalid oslDirectoryItem parameter + @retval E_FAULT bad address + @retval E_OVERFLOW value too large for defined data type + @retval E_INTR function call was interrupted + @retval E_NOLINK link has been severed + @retval E_MULTIHOP components of path require hopping to multiple remote machines and the file system does not allow it + @retval E_MFILE too many open files used by the process + @retval E_NFILE too many open files in the system + @retval E_NOSPC no space left on device + @retval E_NXIO no such device or address + @retval E_IO on I/O errors + @retval E_NOSYS function not implemented + + @see get() + @see Directory::getNextItem() + @see FileStatus + */ + + RC getFileStatus( FileStatus& rStatus ) + { + return static_cast< RC >( osl_getFileStatus( _pData, &rStatus._aStatus, rStatus._nMask ) ); + } + +/** Determine if a directory item point the same underlying file + + The comparison is done first by URL, and then by resolving links to + find the target, and finally by comparing inodes on unix. + + @param[in] pOther + A directory handle to compare with the underlying object's item + + @retval true if the items point to an identical resource<br> + @retval false if the items point to a different resource, or a fatal error occurred<br> + + @see osl_getDirectoryItem() + + @since LibreOffice 3.6 +*/ + bool isIdenticalTo( const DirectoryItem &pOther ) + { + return osl_identicalDirectoryItem( _pData, pOther._pData ); + } + + friend class Directory; +}; + + +/** Base class for observers of directory creation notifications. + + Clients which uses the method createDirectoryPath of the class + Directory may want to be informed about the directories that + have been created. This may be accomplished by deriving from + this base class and overwriting the virtual function + DirectoryCreated. + + @see Directory::createPath +*/ +class DirectoryCreationObserver +{ +public: + virtual ~DirectoryCreationObserver() {} + + /** This method will be called when a new directory has been + created and needs to be overwritten by derived classes. + You must not delete the directory that was just created + otherwise you will run into an endless loop. + + @param aDirectoryUrl + [in]The absolute file URL of the directory that was just created by + ::osl::Directory::createPath. + */ + virtual void DirectoryCreated(const rtl::OUString& aDirectoryUrl) = 0; +}; + + +// This just an internal helper function for +// private use. +extern "C" inline void SAL_CALL onDirectoryCreated(void* pData, rtl_uString* aDirectoryUrl) +{ + static_cast<DirectoryCreationObserver*>(pData)->DirectoryCreated(aDirectoryUrl); +} + +/** The directory class object provides an enumeration of DirectoryItems. + + @see DirectoryItem + @see File + */ + +class Directory: public FileBase +{ + oslDirectory _pData; + ::rtl::OUString _aPath; + + /** Copy constructor. + */ + + Directory( Directory& ) SAL_DELETED_FUNCTION; + + /** Assignment operator. + */ + + Directory& operator = ( Directory& ) SAL_DELETED_FUNCTION; + +public: + + /** Constructor. + + @param[in] strPath + The full qualified URL of the directory. + Relative URLs are not allowed. + */ + + Directory( const ::rtl::OUString& strPath ): _pData( NULL ), _aPath( strPath ) + { + } + + /** Destructor. + */ + + ~Directory() + { + close(); + } + + /** Obtain the URL. + + @return + the URL with which this Directory instance was created. + + @since LibreOffice 4.1 + */ + rtl::OUString getURL() const { return _aPath; } + + /** Open a directory for enumerating its contents. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOENT the specified path doesn't exist + @retval E_NOTDIR the specified path is not a directory + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES permission denied + @retval E_MFILE too many open files used by the process + @retval E_NFILE too many open files in the system + @retval E_NAMETOOLONG File name too long + @retval E_LOOP Too many symbolic links encountered + + @see getNextItem() + @see close() + */ + + RC open() + { + return static_cast< RC >( osl_openDirectory( _aPath.pData, &_pData ) ); + } + + /** Query if directory is open. + + Query if directory is open and so item enumeration is valid. + + @retval true if the directory is open else false. + + @see open() + @see close() + */ + + bool isOpen() { return _pData != NULL; } + + /** Close a directory. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_BADF invalid oslDirectory parameter + @retval E_INTR the function call was interrupted + + @see open() + */ + + RC close() + { + oslFileError Error = osl_File_E_BADF; + + if( _pData ) + { + Error=osl_closeDirectory( _pData ); + _pData = NULL; + } + + return static_cast< RC >( Error ); + } + + + /** Resets the directory item enumeration to the beginning. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOENT the specified path doesn't exist + @retval E_NOTDIR the specified path is not a directory + @retval E_NOMEM not enough memory for allocating structures + @retval E_ACCES permission denied + @retval E_MFILE too many open files used by the process + @retval E_NFILE too many open files in the system + @retval E_NAMETOOLONG File name too long + @retval E_LOOP Too many symbolic links encountered + + @see open() + */ + + RC reset() + { + close(); + return open(); + } + + /** Retrieve the next item of a previously opened directory. + + Retrieves the next item of a previously opened directory. + + @param[out] rItem + On success a valid DirectoryItem. + + @param[in] nHint + With this parameter the caller can tell the implementation that (s)he + is going to call this function uHint times afterwards. This enables the implementation to + get the information for more than one file and cache it until the next calls. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_NOENT no more entries in this directory + @retval E_BADF invalid oslDirectory parameter + @retval E_OVERFLOW the value too large for defined data type + + @see DirectoryItem + */ + + RC getNextItem( DirectoryItem& rItem, sal_uInt32 nHint = 0 ) + { + if( rItem._pData ) + { + osl_releaseDirectoryItem( rItem._pData ); + rItem._pData = NULL; + } + return static_cast<RC>(osl_getNextDirectoryItem( _pData, &rItem._pData, nHint )); + } + + + /** Retrieve information about a volume. + + Retrieves information about a volume. A volume can either be a mount point, a network + resource or a drive depending on Operating System and File System. + + @param[in] ustrDirectoryURL + Full qualified URL of the volume + + @param[out] rInfo + On success it receives information about the volume. + + @retval E_None on success + @retval E_NOMEM not enough memory for allocating structures + @retval E_INVAL the format of the parameters was not valid + @retval E_NOTDIR not a directory + @retval E_NAMETOOLONG file name too long + @retval E_NOENT no such file or directory + @retval E_ACCES permission denied + @retval E_LOOP too many symbolic links encountered + @retval E_FAULT Bad address + @retval E_IO on I/O errors + @retval E_NOSYS function not implemented + @retval E_MULTIHOP multihop attempted + @retval E_NOLINK link has been severed + @retval E_INTR function call was interrupted + + @see FileStatus + @see VolumeInfo + */ + + static RC getVolumeInfo( const ::rtl::OUString& ustrDirectoryURL, VolumeInfo& rInfo ) + { + return static_cast< RC >( osl_getVolumeInformation( ustrDirectoryURL.pData, &rInfo._aInfo, rInfo._nMask ) ); + } + + /** Create a directory. + + @param[in] ustrDirectoryURL + Full qualified URL of the directory to create. + + @param[in] flags + Optional flags, see osl_createDirectoryWithFlags for details. This + defaulted parameter is new since LibreOffice 4.3. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_EXIST file exists + @retval E_ACCES permission denied + @retval E_NAMETOOLONG file name too long + @retval E_NOENT no such file or directory + @retval E_NOTDIR not a directory + @retval E_ROFS read-only file system + @retval E_NOSPC no space left on device + @retval E_DQUOT quota exceeded + @retval E_LOOP too many symbolic links encountered + @retval E_FAULT bad address + @retval E_IO on I/O errors + @retval E_MLINK too many links + @retval E_MULTIHOP multihop attempted + @retval E_NOLINK link has been severed + + @see remove() + */ + + static RC create( + const ::rtl::OUString& ustrDirectoryURL, + sal_uInt32 flags = osl_File_OpenFlag_Read | osl_File_OpenFlag_Write ) + { + return static_cast< RC >( + osl_createDirectoryWithFlags( ustrDirectoryURL.pData, flags ) ); + } + + /** Remove an empty directory. + + @param[in] ustrDirectoryURL + Full qualified URL of the directory. + + @retval E_None on success + @retval E_INVAL the format of the parameters was not valid + @retval E_NOMEM not enough memory for allocating structures + @retval E_PERM operation not permitted + @retval E_ACCES permission denied + @retval E_NOENT no such file or directory + @retval E_NOTDIR not a directory + @retval E_NOTEMPTY directory not empty + @retval E_FAULT bad address + @retval E_NAMETOOLONG file name too long + @retval E_BUSY device or resource busy + @retval E_ROFS read-only file system + @retval E_LOOP too many symbolic links encountered + @retval E_EXIST file exists + @retval E_IO on I/O errors + @retval E_MULTIHOP multihop attempted + @retval E_NOLINK link has been severed + + @see create() + */ + + static RC remove( const ::rtl::OUString& ustrDirectoryURL ) + { + return static_cast< RC >( osl_removeDirectory( ustrDirectoryURL.pData ) ); + } + + /** Create a directory path. + + The osl_createDirectoryPath function creates a specified directory path. + All nonexisting sub directories will be created. + + @attention You cannot rely on getting the error code E_EXIST for existing + directories. Programming against this error code is in general a strong + indication of a wrong usage of osl_createDirectoryPath. + + @param aDirectoryUrl + [in] The absolute file URL of the directory path to create. + A relative file URL will not be accepted. + + @param aDirectoryCreationObserver + [in] Pointer to an instance of type DirectoryCreationObserver that will + be informed about the creation of a directory. The value of this + parameter may be NULL, in this case notifications will not be sent. + + @retval E_None On success + @retval E_INVAL The format of the parameters was not valid + @retval E_ACCES Permission denied + @retval E_EXIST The final node of the specified directory path already exist + @retval E_NAMETOOLONG The name of the specified directory path exceeds the maximum allowed length + @retval E_NOTDIR A component of the specified directory path already exist as file in any part of the directory path + @retval E_ROFS Read-only file system + @retval E_NOSPC No space left on device + @retval E_DQUOT Quota exceeded + @retval E_FAULT Bad address + @retval E_IO I/O error + @retval E_LOOP Too many symbolic links encountered + @retval E_NOLINK Link has been severed + @retval E_invalidError An unknown error occurred + + @see DirectoryCreationObserver + @see create + */ + static RC createPath( + const ::rtl::OUString& aDirectoryUrl, + DirectoryCreationObserver* aDirectoryCreationObserver = NULL) + { + return static_cast< RC >(osl_createDirectoryPath( + aDirectoryUrl.pData, + aDirectoryCreationObserver ? onDirectoryCreated : NULL, + aDirectoryCreationObserver)); + } +}; + +} /* namespace osl */ + +#endif // INCLUDED_OSL_FILE_HXX + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |