diff options
Diffstat (limited to 'sc/source/core/data/dpoutput.cxx')
| -rw-r--r-- | sc/source/core/data/dpoutput.cxx | 1778 |
1 files changed, 1778 insertions, 0 deletions
diff --git a/sc/source/core/data/dpoutput.cxx b/sc/source/core/data/dpoutput.cxx new file mode 100644 index 000000000..ee5c9f329 --- /dev/null +++ b/sc/source/core/data/dpoutput.cxx @@ -0,0 +1,1778 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <scitems.hxx> +#include <editeng/borderline.hxx> +#include <editeng/boxitem.hxx> +#include <editeng/wghtitem.hxx> +#include <editeng/justifyitem.hxx> +#include <o3tl/safeint.hxx> +#include <osl/diagnose.h> +#include <svl/itemset.hxx> + +#include <dpoutput.hxx> +#include <document.hxx> +#include <attrib.hxx> +#include <formula/errorcodes.hxx> +#include <miscuno.hxx> +#include <globstr.hrc> +#include <stlpool.hxx> +#include <stlsheet.hxx> +#include <scresid.hxx> +#include <unonames.hxx> +#include <strings.hrc> +#include <stringutil.hxx> +#include <dputil.hxx> + +#include <com/sun/star/beans/XPropertySet.hpp> +#include <com/sun/star/sheet/DataPilotTableHeaderData.hpp> +#include <com/sun/star/sheet/DataPilotFieldOrientation.hpp> +#include <com/sun/star/sheet/DataPilotTablePositionData.hpp> +#include <com/sun/star/sheet/DataPilotTableResultData.hpp> +#include <com/sun/star/sheet/MemberResultFlags.hpp> +#include <com/sun/star/sheet/DataResultFlags.hpp> +#include <com/sun/star/sheet/DataPilotTablePositionType.hpp> +#include <com/sun/star/sheet/GeneralFunction2.hpp> +#include <com/sun/star/sheet/MemberResult.hpp> +#include <com/sun/star/sheet/XDataPilotMemberResults.hpp> +#include <com/sun/star/sheet/XDataPilotResults.hpp> +#include <com/sun/star/sheet/XDimensionsSupplier.hpp> +#include <com/sun/star/sheet/XHierarchiesSupplier.hpp> +#include <com/sun/star/sheet/XLevelsSupplier.hpp> +#include <com/sun/star/sheet/XMembersAccess.hpp> +#include <com/sun/star/sheet/XMembersSupplier.hpp> +#include <vector> + +using namespace com::sun::star; +using ::std::vector; +using ::com::sun::star::beans::XPropertySet; +using ::com::sun::star::uno::Sequence; +using ::com::sun::star::uno::UNO_QUERY; +using ::com::sun::star::uno::Reference; +using ::com::sun::star::sheet::DataPilotTablePositionData; +using ::com::sun::star::sheet::DataPilotTableResultData; + +#define SC_DP_FRAME_INNER_BOLD 20 +#define SC_DP_FRAME_OUTER_BOLD 40 + +#define SC_DP_FRAME_COLOR Color(0,0,0) //( 0x20, 0x40, 0x68 ) + +struct ScDPOutLevelData +{ + long mnDim; + long mnHier; + long mnLevel; + long mnDimPos; + sal_uInt32 mnSrcNumFmt; /// Prevailing number format used in the source data. + uno::Sequence<sheet::MemberResult> maResult; + OUString maName; /// Name is the internal field name. + OUString maCaption; /// Caption is the name visible in the output table. + bool mbHasHiddenMember:1; + bool mbDataLayout:1; + bool mbPageDim:1; + + ScDPOutLevelData(long nDim, long nHier, long nLevel, long nDimPos, sal_uInt32 nSrcNumFmt, const uno::Sequence<sheet::MemberResult> &aResult, + const OUString &aName, const OUString &aCaption, bool bHasHiddenMember, bool bDataLayout, bool bPageDim) : + mnDim(nDim), mnHier(nHier), mnLevel(nLevel), mnDimPos(nDimPos), mnSrcNumFmt(nSrcNumFmt), maResult(aResult), + maName(aName), maCaption(aCaption), mbHasHiddenMember(bHasHiddenMember), mbDataLayout(bDataLayout), + mbPageDim(bPageDim) + { + } + + // bug (73840) in uno::Sequence - copy and then assign doesn't work! +}; + + + +namespace { + struct ScDPOutLevelDataComparator + { + bool operator()(const ScDPOutLevelData & rA, const ScDPOutLevelData & rB) + { + return rA.mnDimPos<rB.mnDimPos || ( rA.mnDimPos==rB.mnDimPos && rA.mnHier<rB.mnHier ) || + ( rA.mnDimPos==rB.mnDimPos && rA.mnHier==rB.mnHier && rA.mnLevel<rB.mnLevel ); + } + }; + + +class ScDPOutputImpl +{ + ScDocument* mpDoc; + sal_uInt16 mnTab; + ::std::vector< bool > mbNeedLineCols; + ::std::vector< SCCOL > mnCols; + + ::std::vector< bool > mbNeedLineRows; + ::std::vector< SCROW > mnRows; + + SCCOL mnTabStartCol; + SCROW mnTabStartRow; + + SCCOL mnDataStartCol; + SCROW mnDataStartRow; + SCCOL mnTabEndCol; + SCROW mnTabEndRow; + +public: + ScDPOutputImpl( ScDocument* pDoc, sal_uInt16 nTab, + SCCOL nTabStartCol, + SCROW nTabStartRow, + SCCOL nDataStartCol, + SCROW nDataStartRow, + SCCOL nTabEndCol, + SCROW nTabEndRow ); + bool AddRow( SCROW nRow ); + bool AddCol( SCCOL nCol ); + + void OutputDataArea(); + void OutputBlockFrame ( SCCOL nStartCol, SCROW nStartRow, SCCOL nEndCol, SCROW nEndRow, bool bHori = false ); + +}; + +void ScDPOutputImpl::OutputDataArea() +{ + AddRow( mnDataStartRow ); + AddCol( mnDataStartCol ); + + mnCols.push_back( mnTabEndCol+1); //set last row bottom + mnRows.push_back( mnTabEndRow+1); //set last col bottom + + bool bAllRows = ( ( mnTabEndRow - mnDataStartRow + 2 ) == static_cast<SCROW>(mnRows.size()) ); + + std::sort( mnCols.begin(), mnCols.end()); + std::sort( mnRows.begin(), mnRows.end()); + + for( SCCOL nCol = 0; nCol < static_cast<SCCOL>(mnCols.size())-1; nCol ++ ) + { + if ( !bAllRows ) + { + if ( nCol < static_cast<SCCOL>(mnCols.size())-2) + { + for ( SCROW i = nCol%2; i < static_cast<SCROW>(mnRows.size())-2; i +=2 ) + OutputBlockFrame( mnCols[nCol], mnRows[i], mnCols[nCol+1]-1, mnRows[i+1]-1 ); + if ( mnRows.size()>=2 ) + OutputBlockFrame( mnCols[nCol], mnRows[mnRows.size()-2], mnCols[nCol+1]-1, mnRows[mnRows.size()-1]-1 ); + } + else + { + for ( SCROW i = 0 ; i < static_cast<SCROW>(mnRows.size())-1; i++ ) + OutputBlockFrame( mnCols[nCol], mnRows[i], mnCols[nCol+1]-1, mnRows[i+1]-1 ); + } + } + else + OutputBlockFrame( mnCols[nCol], mnRows.front(), mnCols[nCol+1]-1, mnRows.back()-1, bAllRows ); + } + //out put rows area outer framer + if ( mnTabStartCol != mnDataStartCol ) + { + if ( mnTabStartRow != mnDataStartRow ) + OutputBlockFrame( mnTabStartCol, mnTabStartRow, mnDataStartCol-1, mnDataStartRow-1 ); + OutputBlockFrame( mnTabStartCol, mnDataStartRow, mnDataStartCol-1, mnTabEndRow ); + } + //out put cols area outer framer + OutputBlockFrame( mnDataStartCol, mnTabStartRow, mnTabEndCol, mnDataStartRow-1 ); +} + +ScDPOutputImpl::ScDPOutputImpl( ScDocument* pDoc, sal_uInt16 nTab, + SCCOL nTabStartCol, + SCROW nTabStartRow, + SCCOL nDataStartCol, + SCROW nDataStartRow, + SCCOL nTabEndCol, + SCROW nTabEndRow ): + mpDoc( pDoc ), + mnTab( nTab ), + mnTabStartCol( nTabStartCol ), + mnTabStartRow( nTabStartRow ), + mnDataStartCol ( nDataStartCol ), + mnDataStartRow ( nDataStartRow ), + mnTabEndCol( nTabEndCol ), + mnTabEndRow( nTabEndRow ) +{ + mbNeedLineCols.resize( nTabEndCol-nDataStartCol+1, false ); + mbNeedLineRows.resize( nTabEndRow-nDataStartRow+1, false ); + +} + +bool ScDPOutputImpl::AddRow( SCROW nRow ) +{ + if ( !mbNeedLineRows[ nRow - mnDataStartRow ] ) + { + mbNeedLineRows[ nRow - mnDataStartRow ] = true; + mnRows.push_back( nRow ); + return true; + } + else + return false; +} + +bool ScDPOutputImpl::AddCol( SCCOL nCol ) +{ + + if ( !mbNeedLineCols[ nCol - mnDataStartCol ] ) + { + mbNeedLineCols[ nCol - mnDataStartCol ] = true; + mnCols.push_back( nCol ); + return true; + } + else + return false; +} + +void ScDPOutputImpl::OutputBlockFrame ( SCCOL nStartCol, SCROW nStartRow, SCCOL nEndCol, SCROW nEndRow, bool bHori ) +{ + Color color = SC_DP_FRAME_COLOR; + ::editeng::SvxBorderLine aLine( &color, SC_DP_FRAME_INNER_BOLD ); + ::editeng::SvxBorderLine aOutLine( &color, SC_DP_FRAME_OUTER_BOLD ); + + SvxBoxItem aBox( ATTR_BORDER ); + + if ( nStartCol == mnTabStartCol ) + aBox.SetLine(&aOutLine, SvxBoxItemLine::LEFT); + else + aBox.SetLine(&aLine, SvxBoxItemLine::LEFT); + + if ( nStartRow == mnTabStartRow ) + aBox.SetLine(&aOutLine, SvxBoxItemLine::TOP); + else + aBox.SetLine(&aLine, SvxBoxItemLine::TOP); + + if ( nEndCol == mnTabEndCol ) //bottom row + aBox.SetLine(&aOutLine, SvxBoxItemLine::RIGHT); + else + aBox.SetLine(&aLine, SvxBoxItemLine::RIGHT); + + if ( nEndRow == mnTabEndRow ) //bottom + aBox.SetLine(&aOutLine, SvxBoxItemLine::BOTTOM); + else + aBox.SetLine(&aLine, SvxBoxItemLine::BOTTOM); + + SvxBoxInfoItem aBoxInfo( ATTR_BORDER_INNER ); + aBoxInfo.SetValid(SvxBoxInfoItemValidFlags::VERT,false ); + if ( bHori ) + { + aBoxInfo.SetValid(SvxBoxInfoItemValidFlags::HORI); + aBoxInfo.SetLine( &aLine, SvxBoxInfoItemLine::HORI ); + } + else + aBoxInfo.SetValid(SvxBoxInfoItemValidFlags::HORI,false ); + + aBoxInfo.SetValid(SvxBoxInfoItemValidFlags::DISTANCE,false); + + mpDoc->ApplyFrameAreaTab(ScRange(nStartCol, nStartRow, mnTab, nEndCol, nEndRow , mnTab), aBox, aBoxInfo); + +} + +void lcl_SetStyleById(ScDocument* pDoc, SCTAB nTab, + SCCOL nCol1, SCROW nRow1, SCCOL nCol2, SCROW nRow2, + const char* pStrId) +{ + if ( nCol1 > nCol2 || nRow1 > nRow2 ) + { + OSL_FAIL("SetStyleById: invalid range"); + return; + } + + OUString aStyleName = ScResId(pStrId); + ScStyleSheetPool* pStlPool = pDoc->GetStyleSheetPool(); + ScStyleSheet* pStyle = static_cast<ScStyleSheet*>( pStlPool->Find( aStyleName, SfxStyleFamily::Para ) ); + if (!pStyle) + { + // create new style (was in ScPivot::SetStyle) + + pStyle = static_cast<ScStyleSheet*>( &pStlPool->Make( aStyleName, SfxStyleFamily::Para, + SfxStyleSearchBits::UserDefined ) ); + pStyle->SetParent( ScResId(STR_STYLENAME_STANDARD) ); + SfxItemSet& rSet = pStyle->GetItemSet(); + if (strcmp(pStrId, STR_PIVOT_STYLENAME_RESULT) == 0 || strcmp(pStrId, STR_PIVOT_STYLENAME_TITLE) == 0){ + rSet.Put( SvxWeightItem( WEIGHT_BOLD, ATTR_FONT_WEIGHT ) ); + rSet.Put( SvxWeightItem( WEIGHT_BOLD, ATTR_CJK_FONT_WEIGHT ) ); + rSet.Put( SvxWeightItem( WEIGHT_BOLD, ATTR_CTL_FONT_WEIGHT ) ); + } + if (strcmp(pStrId, STR_PIVOT_STYLENAME_CATEGORY) == 0 || strcmp(pStrId, STR_PIVOT_STYLENAME_TITLE) == 0) + rSet.Put( SvxHorJustifyItem( SvxCellHorJustify::Left, ATTR_HOR_JUSTIFY ) ); + } + + pDoc->ApplyStyleAreaTab( nCol1, nRow1, nCol2, nRow2, nTab, *pStyle ); +} + +void lcl_SetFrame( ScDocument* pDoc, SCTAB nTab, + SCCOL nCol1, SCROW nRow1, SCCOL nCol2, SCROW nRow2, + sal_uInt16 nWidth ) +{ + ::editeng::SvxBorderLine aLine(nullptr, nWidth, SvxBorderLineStyle::SOLID); + SvxBoxItem aBox( ATTR_BORDER ); + aBox.SetLine(&aLine, SvxBoxItemLine::LEFT); + aBox.SetLine(&aLine, SvxBoxItemLine::TOP); + aBox.SetLine(&aLine, SvxBoxItemLine::RIGHT); + aBox.SetLine(&aLine, SvxBoxItemLine::BOTTOM); + SvxBoxInfoItem aBoxInfo( ATTR_BORDER_INNER ); + aBoxInfo.SetValid(SvxBoxInfoItemValidFlags::HORI,false); + aBoxInfo.SetValid(SvxBoxInfoItemValidFlags::VERT,false); + aBoxInfo.SetValid(SvxBoxInfoItemValidFlags::DISTANCE,false); + + pDoc->ApplyFrameAreaTab(ScRange(nCol1, nRow1, nTab, nCol2, nRow2, nTab), aBox, aBoxInfo); +} + +void lcl_FillNumberFormats( std::unique_ptr<sal_uInt32[]>& rFormats, long& rCount, + const uno::Reference<sheet::XDataPilotMemberResults>& xLevRes, + const uno::Reference<container::XIndexAccess>& xDims ) +{ + if ( rFormats ) + return; // already set + + // xLevRes is from the data layout dimension + //TODO: use result sequence from ScDPOutLevelData! + + uno::Sequence<sheet::MemberResult> aResult = xLevRes->getResults(); + + long nSize = aResult.getLength(); + if (!nSize) + return; + + // get names/formats for all data dimensions + //TODO: merge this with the loop to collect ScDPOutLevelData? + + std::vector <OUString> aDataNames; + std::vector <sal_uInt32> aDataFormats; + sal_Int32 nDimCount = xDims->getCount(); + sal_Int32 nDim = 0; + for ( ; nDim < nDimCount ; nDim++) + { + uno::Reference<uno::XInterface> xDim(xDims->getByIndex(nDim), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xDimProp( xDim, uno::UNO_QUERY ); + uno::Reference<container::XNamed> xDimName( xDim, uno::UNO_QUERY ); + if ( xDimProp.is() && xDimName.is() ) + { + sheet::DataPilotFieldOrientation eDimOrient = + ScUnoHelpFunctions::GetEnumProperty( + xDimProp, SC_UNO_DP_ORIENTATION, + sheet::DataPilotFieldOrientation_HIDDEN ); + if ( eDimOrient == sheet::DataPilotFieldOrientation_DATA ) + { + aDataNames.push_back(xDimName->getName()); + long nFormat = ScUnoHelpFunctions::GetLongProperty( + xDimProp, + SC_UNONAME_NUMFMT ); + aDataFormats.push_back(nFormat); + } + } + } + + if (aDataFormats.empty()) + return; + + const sheet::MemberResult* pArray = aResult.getConstArray(); + + OUString aName; + sal_uInt32* pNumFmt = new sal_uInt32[nSize]; + if (aDataFormats.size() == 1) + { + // only one data dimension -> use its numberformat everywhere + long nFormat = aDataFormats[0]; + for (long nPos=0; nPos<nSize; nPos++) + pNumFmt[nPos] = nFormat; + } + else + { + for (long nPos=0; nPos<nSize; nPos++) + { + // if CONTINUE bit is set, keep previous name + //TODO: keep number format instead! + if ( !(pArray[nPos].Flags & sheet::MemberResultFlags::CONTINUE) ) + aName = pArray[nPos].Name; + + sal_uInt32 nFormat = 0; + for (size_t i=0; i<aDataFormats.size(); i++) + if (aName == aDataNames[i]) //TODO: search more efficiently? + { + nFormat = aDataFormats[i]; + break; + } + pNumFmt[nPos] = nFormat; + } + } + + rFormats.reset( pNumFmt ); + rCount = nSize; +} + +sal_uInt32 lcl_GetFirstNumberFormat( const uno::Reference<container::XIndexAccess>& xDims ) +{ + long nDimCount = xDims->getCount(); + for (long nDim=0; nDim<nDimCount; nDim++) + { + uno::Reference<beans::XPropertySet> xDimProp(xDims->getByIndex(nDim), uno::UNO_QUERY); + if ( xDimProp.is() ) + { + sheet::DataPilotFieldOrientation eDimOrient = + ScUnoHelpFunctions::GetEnumProperty( + xDimProp, SC_UNO_DP_ORIENTATION, + sheet::DataPilotFieldOrientation_HIDDEN ); + if ( eDimOrient == sheet::DataPilotFieldOrientation_DATA ) + { + long nFormat = ScUnoHelpFunctions::GetLongProperty( + xDimProp, + SC_UNONAME_NUMFMT ); + + return nFormat; // use format from first found data dimension + } + } + } + + return 0; // none found +} + +bool lcl_MemberEmpty( const uno::Sequence<sheet::MemberResult>& rSeq ) +{ + // used to skip levels that have no members + + return std::none_of(rSeq.begin(), rSeq.end(), + [](const sheet::MemberResult& rMem) { + return rMem.Flags & sheet::MemberResultFlags::HASMEMBER; }); +} + +/** + * Get visible page dimension members as results, except that, if all + * members are visible, then this function returns empty result. + */ +uno::Sequence<sheet::MemberResult> getVisiblePageMembersAsResults( const uno::Reference<uno::XInterface>& xLevel ) +{ + if (!xLevel.is()) + return uno::Sequence<sheet::MemberResult>(); + + uno::Reference<sheet::XMembersSupplier> xMSupplier(xLevel, UNO_QUERY); + if (!xMSupplier.is()) + return uno::Sequence<sheet::MemberResult>(); + + uno::Reference<sheet::XMembersAccess> xNA = xMSupplier->getMembers(); + if (!xNA.is()) + return uno::Sequence<sheet::MemberResult>(); + + std::vector<sheet::MemberResult> aRes; + const uno::Sequence<OUString> aNames = xNA->getElementNames(); + for (const OUString& rName : aNames) + { + xNA->getByName(rName); + + uno::Reference<beans::XPropertySet> xMemPS(xNA->getByName(rName), UNO_QUERY); + if (!xMemPS.is()) + continue; + + OUString aCaption = ScUnoHelpFunctions::GetStringProperty(xMemPS, SC_UNO_DP_LAYOUTNAME, OUString()); + if (aCaption.isEmpty()) + aCaption = rName; + + bool bVisible = ScUnoHelpFunctions::GetBoolProperty(xMemPS, SC_UNO_DP_ISVISIBLE); + + if (bVisible) + { + /* TODO: any numeric value to obtain? */ + double fValue; + rtl::math::setNan(&fValue); + aRes.emplace_back(rName, aCaption, 0, fValue); + } + } + + if (aNames.getLength() == static_cast<sal_Int32>(aRes.size())) + // All members are visible. Return empty result. + return uno::Sequence<sheet::MemberResult>(); + + return ScUnoHelpFunctions::VectorToSequence(aRes); +} + +} + +ScDPOutput::ScDPOutput( ScDocument* pD, const uno::Reference<sheet::XDimensionsSupplier>& xSrc, + const ScAddress& rPos, bool bFilter ) : + pDoc( pD ), + xSource( xSrc ), + aStartPos( rPos ), + nColFmtCount( 0 ), + nRowFmtCount( 0 ), + nSingleNumFmt( 0 ), + nColCount(0), + nRowCount(0), + nHeaderSize(0), + bDoFilter(bFilter), + bResultsError(false), + bSizesValid(false), + bSizeOverflow(false), + mbHeaderLayout(false) +{ + nTabStartCol = nMemberStartCol = nDataStartCol = nTabEndCol = 0; + nTabStartRow = nMemberStartRow = nDataStartRow = nTabEndRow = 0; + + uno::Reference<sheet::XDataPilotResults> xResult( xSource, uno::UNO_QUERY ); + if ( xSource.is() && xResult.is() ) + { + // get dimension results: + + uno::Reference<container::XIndexAccess> xDims = + new ScNameToIndexAccess( xSource->getDimensions() ); + long nDimCount = xDims->getCount(); + for (long nDim=0; nDim<nDimCount; nDim++) + { + uno::Reference<uno::XInterface> xDim(xDims->getByIndex(nDim), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xDimProp( xDim, uno::UNO_QUERY ); + uno::Reference<sheet::XHierarchiesSupplier> xDimSupp( xDim, uno::UNO_QUERY ); + if ( xDimProp.is() && xDimSupp.is() ) + { + sheet::DataPilotFieldOrientation eDimOrient = + ScUnoHelpFunctions::GetEnumProperty( + xDimProp, SC_UNO_DP_ORIENTATION, + sheet::DataPilotFieldOrientation_HIDDEN ); + long nDimPos = ScUnoHelpFunctions::GetLongProperty( xDimProp, + SC_UNO_DP_POSITION ); + bool bIsDataLayout = ScUnoHelpFunctions::GetBoolProperty( + xDimProp, SC_UNO_DP_ISDATALAYOUT); + bool bHasHiddenMember = ScUnoHelpFunctions::GetBoolProperty( + xDimProp, SC_UNO_DP_HAS_HIDDEN_MEMBER); + sal_Int32 nNumFmt = ScUnoHelpFunctions::GetLongProperty( + xDimProp, SC_UNO_DP_NUMBERFO); + + if ( eDimOrient != sheet::DataPilotFieldOrientation_HIDDEN ) + { + uno::Reference<container::XIndexAccess> xHiers = + new ScNameToIndexAccess( xDimSupp->getHierarchies() ); + long nHierarchy = ScUnoHelpFunctions::GetLongProperty( + xDimProp, + SC_UNO_DP_USEDHIERARCHY ); + if ( nHierarchy >= xHiers->getCount() ) + nHierarchy = 0; + + uno::Reference<sheet::XLevelsSupplier> xHierSupp(xHiers->getByIndex(nHierarchy), + uno::UNO_QUERY); + if ( xHierSupp.is() ) + { + uno::Reference<container::XIndexAccess> xLevels = + new ScNameToIndexAccess( xHierSupp->getLevels() ); + long nLevCount = xLevels->getCount(); + for (long nLev=0; nLev<nLevCount; nLev++) + { + uno::Reference<uno::XInterface> xLevel(xLevels->getByIndex(nLev), + uno::UNO_QUERY); + uno::Reference<container::XNamed> xLevNam( xLevel, uno::UNO_QUERY ); + uno::Reference<sheet::XDataPilotMemberResults> xLevRes( + xLevel, uno::UNO_QUERY ); + if ( xLevNam.is() && xLevRes.is() ) + { + OUString aName = xLevNam->getName(); + Reference<XPropertySet> xPropSet(xLevel, UNO_QUERY); + // Caption equals the field name by default. + // #i108948# use ScUnoHelpFunctions::GetStringProperty, because + // LayoutName is new and may not be present in external implementation + OUString aCaption = ScUnoHelpFunctions::GetStringProperty( xPropSet, + SC_UNO_DP_LAYOUTNAME, aName ); + + switch ( eDimOrient ) + { + case sheet::DataPilotFieldOrientation_COLUMN: + { + uno::Sequence<sheet::MemberResult> aResult = xLevRes->getResults(); + if (!lcl_MemberEmpty(aResult)) + { + ScDPOutLevelData tmp(nDim, nHierarchy, nLev, nDimPos, nNumFmt, aResult, aName, + aCaption, bHasHiddenMember, bIsDataLayout, false); + pColFields.push_back(tmp); + } + } + break; + case sheet::DataPilotFieldOrientation_ROW: + { + uno::Sequence<sheet::MemberResult> aResult = xLevRes->getResults(); + if (!lcl_MemberEmpty(aResult)) + { + ScDPOutLevelData tmp(nDim, nHierarchy, nLev, nDimPos, nNumFmt, aResult, aName, + aCaption, bHasHiddenMember, bIsDataLayout, false); + pRowFields.push_back(tmp); + } + } + break; + case sheet::DataPilotFieldOrientation_PAGE: + { + uno::Sequence<sheet::MemberResult> aResult = getVisiblePageMembersAsResults(xLevel); + // no check on results for page fields + ScDPOutLevelData tmp(nDim, nHierarchy, nLev, nDimPos, nNumFmt, aResult, aName, + aCaption, bHasHiddenMember, false, true); + pPageFields.push_back(tmp); + } + break; + default: + { + // added to avoid warnings + } + } + + // get number formats from data dimensions + if ( bIsDataLayout ) + { + OSL_ENSURE( nLevCount == 1, "data layout: multiple levels?" ); + if ( eDimOrient == sheet::DataPilotFieldOrientation_COLUMN ) + lcl_FillNumberFormats( pColNumFmt, nColFmtCount, xLevRes, xDims ); + else if ( eDimOrient == sheet::DataPilotFieldOrientation_ROW ) + lcl_FillNumberFormats( pRowNumFmt, nRowFmtCount, xLevRes, xDims ); + } + } + } + } + } + else if ( bIsDataLayout ) + { + // data layout dimension is hidden (allowed if there is only one data dimension) + // -> use the number format from the first data dimension for all results + + nSingleNumFmt = lcl_GetFirstNumberFormat( xDims ); + } + } + } + std::sort(pColFields.begin(), pColFields.end(), ScDPOutLevelDataComparator()); + std::sort(pRowFields.begin(), pRowFields.end(), ScDPOutLevelDataComparator()); + std::sort(pPageFields.begin(), pPageFields.end(), ScDPOutLevelDataComparator()); + + // get data results: + + try + { + aData = xResult->getResults(); + } + catch (const uno::RuntimeException&) + { + bResultsError = true; + } + } + + // get "DataDescription" property (may be missing in external sources) + + uno::Reference<beans::XPropertySet> xSrcProp( xSource, uno::UNO_QUERY ); + if ( xSrcProp.is() ) + { + try + { + uno::Any aAny = xSrcProp->getPropertyValue( SC_UNO_DP_DATADESC ); + OUString aUStr; + aAny >>= aUStr; + aDataDescription = aUStr; + } + catch(const uno::Exception&) + { + } + } +} + +ScDPOutput::~ScDPOutput() +{ +} + +void ScDPOutput::SetPosition( const ScAddress& rPos ) +{ + aStartPos = rPos; + bSizesValid = bSizeOverflow = false; +} + +void ScDPOutput::DataCell( SCCOL nCol, SCROW nRow, SCTAB nTab, const sheet::DataResult& rData ) +{ + long nFlags = rData.Flags; + if ( nFlags & sheet::DataResultFlags::ERROR ) + { + pDoc->SetError( nCol, nRow, nTab, FormulaError::NoValue ); + } + else if ( nFlags & sheet::DataResultFlags::HASDATA ) + { + pDoc->SetValue( nCol, nRow, nTab, rData.Value ); + + // use number formats from source + + OSL_ENSURE( bSizesValid, "DataCell: !bSizesValid" ); + sal_uInt32 nFormat = 0; + bool bApplyFormat = false; + if ( pColNumFmt ) + { + if ( nCol >= nDataStartCol ) + { + long nIndex = nCol - nDataStartCol; + if ( nIndex < nColFmtCount ) + { + nFormat = pColNumFmt[nIndex]; + bApplyFormat = true; + } + } + } + else if ( pRowNumFmt ) + { + if ( nRow >= nDataStartRow ) + { + long nIndex = nRow - nDataStartRow; + if ( nIndex < nRowFmtCount ) + { + nFormat = pRowNumFmt[nIndex]; + bApplyFormat = true; + } + } + } + else if ( nSingleNumFmt != 0 ) + { + nFormat = nSingleNumFmt; // single format is used everywhere + bApplyFormat = true; + } + + if (bApplyFormat) + pDoc->ApplyAttr(nCol, nRow, nTab, SfxUInt32Item(ATTR_VALUE_FORMAT, nFormat)); + } + // SubTotal formatting is controlled by headers +} + +void ScDPOutput::HeaderCell( SCCOL nCol, SCROW nRow, SCTAB nTab, + const sheet::MemberResult& rData, bool bColHeader, long nLevel ) +{ + long nFlags = rData.Flags; + + if ( nFlags & sheet::MemberResultFlags::HASMEMBER ) + { + bool bNumeric = (nFlags & sheet::MemberResultFlags::NUMERIC) != 0; + if (bNumeric && std::isfinite( rData.Value)) + { + pDoc->SetValue( nCol, nRow, nTab, rData.Value); + } + else + { + ScSetStringParam aParam; + if (bNumeric) + aParam.setNumericInput(); + else + aParam.setTextInput(); + + pDoc->SetString(nCol, nRow, nTab, rData.Caption, &aParam); + } + } + + if ( nFlags & sheet::MemberResultFlags::SUBTOTAL ) + { + ScDPOutputImpl outputimp( pDoc, nTab, + nTabStartCol, nTabStartRow, + nDataStartCol, nDataStartRow, nTabEndCol, nTabEndRow ); + //TODO: limit frames to horizontal or vertical? + if (bColHeader) + { + outputimp.OutputBlockFrame( nCol,nMemberStartRow+static_cast<SCROW>(nLevel), nCol,nDataStartRow-1 ); + + lcl_SetStyleById( pDoc,nTab, nCol,nMemberStartRow+static_cast<SCROW>(nLevel), nCol,nDataStartRow-1, + STR_PIVOT_STYLENAME_TITLE ); + lcl_SetStyleById( pDoc,nTab, nCol,nDataStartRow, nCol,nTabEndRow, + STR_PIVOT_STYLENAME_RESULT ); + } + else + { + outputimp.OutputBlockFrame( nMemberStartCol+static_cast<SCCOL>(nLevel),nRow, nDataStartCol-1,nRow ); + lcl_SetStyleById( pDoc,nTab, nMemberStartCol+static_cast<SCCOL>(nLevel),nRow, nDataStartCol-1,nRow, + STR_PIVOT_STYLENAME_TITLE ); + lcl_SetStyleById( pDoc,nTab, nDataStartCol,nRow, nTabEndCol,nRow, + STR_PIVOT_STYLENAME_RESULT ); + } + } +} + +void ScDPOutput::FieldCell( + SCCOL nCol, SCROW nRow, SCTAB nTab, const ScDPOutLevelData& rData, bool bInTable) +{ + // Avoid unwanted automatic format detection. + ScSetStringParam aParam; + aParam.mbDetectNumberFormat = false; + aParam.meSetTextNumFormat = ScSetStringParam::Always; + aParam.mbHandleApostrophe = false; + pDoc->SetString(nCol, nRow, nTab, rData.maCaption, &aParam); + + if (bInTable) + lcl_SetFrame( pDoc,nTab, nCol,nRow, nCol,nRow, 20 ); + + // For field button drawing + ScMF nMergeFlag = ScMF::NONE; + if (rData.mbHasHiddenMember) + nMergeFlag |= ScMF::HiddenMember; + + if (rData.mbPageDim) + { + nMergeFlag |= ScMF::ButtonPopup; + pDoc->ApplyFlagsTab(nCol, nRow, nCol, nRow, nTab, ScMF::Button); + pDoc->ApplyFlagsTab(nCol+1, nRow, nCol+1, nRow, nTab, nMergeFlag); + } + else + { + nMergeFlag |= ScMF::Button; + if (!rData.mbDataLayout) + nMergeFlag |= ScMF::ButtonPopup; + pDoc->ApplyFlagsTab(nCol, nRow, nCol, nRow, nTab, nMergeFlag); + } + + lcl_SetStyleById( pDoc,nTab, nCol,nRow, nCol,nRow, STR_PIVOT_STYLENAME_FIELDNAME ); +} + +static void lcl_DoFilterButton( ScDocument* pDoc, SCCOL nCol, SCROW nRow, SCTAB nTab ) +{ + pDoc->SetString( nCol, nRow, nTab, ScResId(STR_CELL_FILTER) ); + pDoc->ApplyFlagsTab(nCol, nRow, nCol, nRow, nTab, ScMF::Button); +} + +void ScDPOutput::CalcSizes() +{ + if (!bSizesValid) + { + // get column size of data from first row + //TODO: allow different sizes (and clear following areas) ??? + + nRowCount = aData.getLength(); + const uno::Sequence<sheet::DataResult>* pRowAry = aData.getConstArray(); + nColCount = nRowCount ? ( pRowAry[0].getLength() ) : 0; + + nHeaderSize = 1; + if (GetHeaderLayout() && pColFields.empty()) + // Insert an extra header row only when there is no column field. + nHeaderSize = 2; + + // calculate output positions and sizes + + long nPageSize = 0; // use page fields! + if ( bDoFilter || !pPageFields.empty() ) + { + nPageSize += pPageFields.size() + 1; // plus one empty row + if ( bDoFilter ) + ++nPageSize; // filter button above the page fields + } + + if ( aStartPos.Col() + static_cast<long>(pRowFields.size()) + nColCount - 1 > MAXCOL || + aStartPos.Row() + nPageSize + nHeaderSize + pColFields.size() + nRowCount > MAXROW ) + { + bSizeOverflow = true; + } + + nTabStartCol = aStartPos.Col(); + nTabStartRow = aStartPos.Row() + static_cast<SCROW>(nPageSize); // below page fields + nMemberStartCol = nTabStartCol; + nMemberStartRow = nTabStartRow + static_cast<SCROW>(nHeaderSize); + nDataStartCol = nMemberStartCol + static_cast<SCCOL>(pRowFields.size()); + nDataStartRow = nMemberStartRow + static_cast<SCROW>(pColFields.size()); + if ( nColCount > 0 ) + nTabEndCol = nDataStartCol + static_cast<SCCOL>(nColCount) - 1; + else + nTabEndCol = nDataStartCol; // single column will remain empty + // if page fields are involved, include the page selection cells + if ( !pPageFields.empty() && nTabEndCol < nTabStartCol + 1 ) + nTabEndCol = nTabStartCol + 1; + if ( nRowCount > 0 ) + nTabEndRow = nDataStartRow + static_cast<SCROW>(nRowCount) - 1; + else + nTabEndRow = nDataStartRow; // single row will remain empty + bSizesValid = true; + } +} + +sal_Int32 ScDPOutput::GetPositionType(const ScAddress& rPos) +{ + using namespace ::com::sun::star::sheet; + + SCCOL nCol = rPos.Col(); + SCROW nRow = rPos.Row(); + SCTAB nTab = rPos.Tab(); + if ( nTab != aStartPos.Tab() ) + return DataPilotTablePositionType::NOT_IN_TABLE; + + CalcSizes(); + + // Make sure the cursor is within the table. + if (nCol < nTabStartCol || nRow < nTabStartRow || nCol > nTabEndCol || nRow > nTabEndRow) + return DataPilotTablePositionType::NOT_IN_TABLE; + + // test for result data area. + if (nCol >= nDataStartCol && nCol <= nTabEndCol && nRow >= nDataStartRow && nRow <= nTabEndRow) + return DataPilotTablePositionType::RESULT; + + bool bInColHeader = (nRow >= nTabStartRow && nRow < nDataStartRow); + bool bInRowHeader = (nCol >= nTabStartCol && nCol < nDataStartCol); + + if (bInColHeader && bInRowHeader) + // probably in that ugly little box at the upper-left corner of the table. + return DataPilotTablePositionType::OTHER; + + if (bInColHeader) + { + if (nRow == nTabStartRow) + // first row in the column header area is always used for column + // field buttons. + return DataPilotTablePositionType::OTHER; + + return DataPilotTablePositionType::COLUMN_HEADER; + } + + if (bInRowHeader) + return DataPilotTablePositionType::ROW_HEADER; + + return DataPilotTablePositionType::OTHER; +} + +void ScDPOutput::Output() +{ + SCTAB nTab = aStartPos.Tab(); + const uno::Sequence<sheet::DataResult>* pRowAry = aData.getConstArray(); + + // calculate output positions and sizes + + CalcSizes(); + if ( bSizeOverflow || bResultsError ) // does output area exceed sheet limits? + return; // nothing + + // clear whole (new) output area + // when modifying table, clear old area ! + //TODO: include InsertDeleteFlags::OBJECTS ??? + pDoc->DeleteAreaTab( aStartPos.Col(), aStartPos.Row(), nTabEndCol, nTabEndRow, nTab, InsertDeleteFlags::ALL ); + + if ( bDoFilter ) + lcl_DoFilterButton( pDoc, aStartPos.Col(), aStartPos.Row(), nTab ); + + // output page fields: + + for (size_t nField=0; nField<pPageFields.size(); ++nField) + { + SCCOL nHdrCol = aStartPos.Col(); + SCROW nHdrRow = aStartPos.Row() + nField + ( bDoFilter ? 1 : 0 ); + // draw without frame for consistency with filter button: + FieldCell(nHdrCol, nHdrRow, nTab, pPageFields[nField], false); + SCCOL nFldCol = nHdrCol + 1; + + OUString aPageValue = ScResId(SCSTR_ALL); + const uno::Sequence<sheet::MemberResult>& rRes = pPageFields[nField].maResult; + sal_Int32 n = rRes.getLength(); + if (n == 1) + { + if (rRes[0].Caption.isEmpty()) + aPageValue = ScResId(STR_EMPTYDATA); + else + aPageValue = rRes[0].Caption; + } + else if (n > 1) + aPageValue = ScResId(SCSTR_MULTIPLE); + + ScSetStringParam aParam; + aParam.setTextInput(); + pDoc->SetString(nFldCol, nHdrRow, nTab, aPageValue, &aParam); + + lcl_SetFrame( pDoc,nTab, nFldCol,nHdrRow, nFldCol,nHdrRow, 20 ); + } + + // data description + // (may get overwritten by first row field) + + if (aDataDescription.isEmpty()) + { + //TODO: use default string ("result") ? + } + pDoc->SetString(nTabStartCol, nTabStartRow, nTab, aDataDescription); + + // set STR_PIVOT_STYLENAME_INNER for whole data area (subtotals are overwritten) + + if ( nDataStartRow > nTabStartRow ) + lcl_SetStyleById( pDoc, nTab, nTabStartCol, nTabStartRow, nTabEndCol, nDataStartRow-1, + STR_PIVOT_STYLENAME_TOP ); + lcl_SetStyleById( pDoc, nTab, nDataStartCol, nDataStartRow, nTabEndCol, nTabEndRow, + STR_PIVOT_STYLENAME_INNER ); + + // output column headers: + ScDPOutputImpl outputimp( pDoc, nTab, + nTabStartCol, nTabStartRow, + nDataStartCol, nDataStartRow, nTabEndCol, nTabEndRow ); + for (size_t nField=0; nField<pColFields.size(); nField++) + { + SCCOL nHdrCol = nDataStartCol + static_cast<SCCOL>(nField); //TODO: check for overflow + FieldCell(nHdrCol, nTabStartRow, nTab, pColFields[nField], true); + + SCROW nRowPos = nMemberStartRow + static_cast<SCROW>(nField); //TODO: check for overflow + const uno::Sequence<sheet::MemberResult> rSequence = pColFields[nField].maResult; + const sheet::MemberResult* pArray = rSequence.getConstArray(); + long nThisColCount = rSequence.getLength(); + OSL_ENSURE( nThisColCount == nColCount, "count mismatch" ); //TODO: ??? + for (long nCol=0; nCol<nThisColCount; nCol++) + { + SCCOL nColPos = nDataStartCol + static_cast<SCCOL>(nCol); //TODO: check for overflow + HeaderCell( nColPos, nRowPos, nTab, pArray[nCol], true, nField ); + if ( ( pArray[nCol].Flags & sheet::MemberResultFlags::HASMEMBER ) && + !( pArray[nCol].Flags & sheet::MemberResultFlags::SUBTOTAL ) ) + { + long nEnd = nCol; + while ( nEnd+1 < nThisColCount && ( pArray[nEnd+1].Flags & sheet::MemberResultFlags::CONTINUE ) ) + ++nEnd; + SCCOL nEndColPos = nDataStartCol + static_cast<SCCOL>(nEnd); //TODO: check for overflow + if ( nField+1 < pColFields.size()) + { + if ( nField == pColFields.size() - 2 ) + { + outputimp.AddCol( nColPos ); + if ( nColPos + 1 == nEndColPos ) + outputimp.OutputBlockFrame( nColPos,nRowPos, nEndColPos,nRowPos+1, true ); + } + else + outputimp.OutputBlockFrame( nColPos,nRowPos, nEndColPos,nRowPos ); + + lcl_SetStyleById( pDoc, nTab, nColPos,nRowPos, nEndColPos,nDataStartRow-1, STR_PIVOT_STYLENAME_CATEGORY ); + } + else + lcl_SetStyleById( pDoc, nTab, nColPos,nRowPos, nColPos,nDataStartRow-1, STR_PIVOT_STYLENAME_CATEGORY ); + } + else if ( pArray[nCol].Flags & sheet::MemberResultFlags::SUBTOTAL ) + outputimp.AddCol( nColPos ); + + // Apply the same number format as in data source. + pDoc->ApplyAttr(nColPos, nRowPos, nTab, SfxUInt32Item(ATTR_VALUE_FORMAT, pColFields[nField].mnSrcNumFmt)); + } + if ( nField== 0 && pColFields.size() == 1 ) + outputimp.OutputBlockFrame( nDataStartCol,nTabStartRow, nTabEndCol,nRowPos-1 ); + } + + // output row headers: + std::vector<bool> vbSetBorder; + vbSetBorder.resize( nTabEndRow - nDataStartRow + 1, false ); + for (size_t nField=0; nField<pRowFields.size(); nField++) + { + SCCOL nHdrCol = nTabStartCol + static_cast<SCCOL>(nField); //TODO: check for overflow + SCROW nHdrRow = nDataStartRow - 1; + FieldCell(nHdrCol, nHdrRow, nTab, pRowFields[nField], true); + + SCCOL nColPos = nMemberStartCol + static_cast<SCCOL>(nField); //TODO: check for overflow + const uno::Sequence<sheet::MemberResult> rSequence = pRowFields[nField].maResult; + const sheet::MemberResult* pArray = rSequence.getConstArray(); + long nThisRowCount = rSequence.getLength(); + OSL_ENSURE( nThisRowCount == nRowCount, "count mismatch" ); //TODO: ??? + for (long nRow=0; nRow<nThisRowCount; nRow++) + { + SCROW nRowPos = nDataStartRow + static_cast<SCROW>(nRow); //TODO: check for overflow + HeaderCell( nColPos, nRowPos, nTab, pArray[nRow], false, nField ); + if ( ( pArray[nRow].Flags & sheet::MemberResultFlags::HASMEMBER ) && + !( pArray[nRow].Flags & sheet::MemberResultFlags::SUBTOTAL ) ) + { + if ( nField+1 < pRowFields.size() ) + { + long nEnd = nRow; + while ( nEnd+1 < nThisRowCount && ( pArray[nEnd+1].Flags & sheet::MemberResultFlags::CONTINUE ) ) + ++nEnd; + SCROW nEndRowPos = nDataStartRow + static_cast<SCROW>(nEnd); //TODO: check for overflow + outputimp.AddRow( nRowPos ); + if ( !vbSetBorder[ nRow ] ) + { + outputimp.OutputBlockFrame( nColPos, nRowPos, nTabEndCol, nEndRowPos ); + vbSetBorder[ nRow ] = true; + } + outputimp.OutputBlockFrame( nColPos, nRowPos, nColPos, nEndRowPos ); + + if ( nField == pRowFields.size() - 2 ) + outputimp.OutputBlockFrame( nColPos+1, nRowPos, nColPos+1, nEndRowPos ); + + lcl_SetStyleById( pDoc, nTab, nColPos,nRowPos, nDataStartCol-1,nEndRowPos, STR_PIVOT_STYLENAME_CATEGORY ); + } + else + lcl_SetStyleById( pDoc, nTab, nColPos,nRowPos, nDataStartCol-1,nRowPos, STR_PIVOT_STYLENAME_CATEGORY ); + } + else if ( pArray[nRow].Flags & sheet::MemberResultFlags::SUBTOTAL ) + outputimp.AddRow( nRowPos ); + + // Apply the same number format as in data source. + pDoc->ApplyAttr(nColPos, nRowPos, nTab, SfxUInt32Item(ATTR_VALUE_FORMAT, pRowFields[nField].mnSrcNumFmt)); + } + } + + if (nColCount == 1 && nRowCount > 0 && pColFields.empty()) + { + // the table contains exactly one data field and no column fields. + // Display data description at top right corner. + ScSetStringParam aParam; + aParam.setTextInput(); + pDoc->SetString(nDataStartCol, nDataStartRow-1, nTab, aDataDescription, &aParam); + } + + // output data results: + + for (long nRow=0; nRow<nRowCount; nRow++) + { + SCROW nRowPos = nDataStartRow + static_cast<SCROW>(nRow); //TODO: check for overflow + const sheet::DataResult* pColAry = pRowAry[nRow].getConstArray(); + long nThisColCount = pRowAry[nRow].getLength(); + OSL_ENSURE( nThisColCount == nColCount, "count mismatch" ); //TODO: ??? + for (long nCol=0; nCol<nThisColCount; nCol++) + { + SCCOL nColPos = nDataStartCol + static_cast<SCCOL>(nCol); //TODO: check for overflow + DataCell( nColPos, nRowPos, nTab, pColAry[nCol] ); + } + } + + outputimp.OutputDataArea(); +} + +ScRange ScDPOutput::GetOutputRange( sal_Int32 nRegionType ) +{ + using namespace ::com::sun::star::sheet; + + CalcSizes(); + + SCTAB nTab = aStartPos.Tab(); + switch (nRegionType) + { + case DataPilotOutputRangeType::RESULT: + return ScRange(nDataStartCol, nDataStartRow, nTab, nTabEndCol, nTabEndRow, nTab); + case DataPilotOutputRangeType::TABLE: + return ScRange(aStartPos.Col(), nTabStartRow, nTab, nTabEndCol, nTabEndRow, nTab); + default: + OSL_ENSURE(nRegionType == DataPilotOutputRangeType::WHOLE, "ScDPOutput::GetOutputRange: unknown region type"); + break; + } + return ScRange(aStartPos.Col(), aStartPos.Row(), nTab, nTabEndCol, nTabEndRow, nTab); +} + +bool ScDPOutput::HasError() +{ + CalcSizes(); + + return bSizeOverflow || bResultsError; +} + +long ScDPOutput::GetHeaderRows() const +{ + return pPageFields.size() + ( bDoFilter ? 1 : 0 ); +} + +namespace +{ + void insertNames(ScDPUniqueStringSet& rNames, const uno::Sequence<sheet::MemberResult>& rMemberResults) + { + for (const sheet::MemberResult& rMemberResult : rMemberResults) + { + if (rMemberResult.Flags & sheet::MemberResultFlags::HASMEMBER) + rNames.insert(rMemberResult.Name); + } + } +} + +void ScDPOutput::GetMemberResultNames(ScDPUniqueStringSet& rNames, long nDimension) +{ + // Return the list of all member names in a dimension's MemberResults. + // Only the dimension has to be compared because this is only used with table data, + // where each dimension occurs only once. + + auto lFindDimension = [nDimension](const ScDPOutLevelData& rField) { return rField.mnDim == nDimension; }; + + // look in column fields + auto colit = std::find_if(pColFields.begin(), pColFields.end(), lFindDimension); + if (colit != pColFields.end()) + { + // collect the member names + insertNames(rNames, colit->maResult); + return; + } + + // look in row fields + auto rowit = std::find_if(pRowFields.begin(), pRowFields.end(), lFindDimension); + if (rowit != pRowFields.end()) + { + // collect the member names + insertNames(rNames, rowit->maResult); + } +} + +void ScDPOutput::SetHeaderLayout(bool bUseGrid) +{ + mbHeaderLayout = bUseGrid; + bSizesValid = false; +} + +namespace { + +void lcl_GetTableVars( sal_Int32& rGrandTotalCols, sal_Int32& rGrandTotalRows, sal_Int32& rDataLayoutIndex, + std::vector<OUString>& rDataNames, std::vector<OUString>& rGivenNames, + sheet::DataPilotFieldOrientation& rDataOrient, + const uno::Reference<sheet::XDimensionsSupplier>& xSource ) +{ + rDataLayoutIndex = -1; // invalid + rGrandTotalCols = 0; + rGrandTotalRows = 0; + rDataOrient = sheet::DataPilotFieldOrientation_HIDDEN; + + uno::Reference<beans::XPropertySet> xSrcProp( xSource, uno::UNO_QUERY ); + bool bColGrand = ScUnoHelpFunctions::GetBoolProperty( + xSrcProp, SC_UNO_DP_COLGRAND); + if ( bColGrand ) + rGrandTotalCols = 1; // default if data layout not in columns + + bool bRowGrand = ScUnoHelpFunctions::GetBoolProperty( + xSrcProp, SC_UNO_DP_ROWGRAND); + if ( bRowGrand ) + rGrandTotalRows = 1; // default if data layout not in rows + + if ( xSource.is() ) + { + // find index and orientation of "data layout" dimension, count data dimensions + + sal_Int32 nDataCount = 0; + + uno::Reference<container::XIndexAccess> xDims = new ScNameToIndexAccess( xSource->getDimensions() ); + long nDimCount = xDims->getCount(); + for (long nDim=0; nDim<nDimCount; nDim++) + { + uno::Reference<uno::XInterface> xDim(xDims->getByIndex(nDim), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xDimProp( xDim, uno::UNO_QUERY ); + if ( xDimProp.is() ) + { + sheet::DataPilotFieldOrientation eDimOrient = + ScUnoHelpFunctions::GetEnumProperty( + xDimProp, SC_UNO_DP_ORIENTATION, + sheet::DataPilotFieldOrientation_HIDDEN ); + if ( ScUnoHelpFunctions::GetBoolProperty( xDimProp, + SC_UNO_DP_ISDATALAYOUT ) ) + { + rDataLayoutIndex = nDim; + rDataOrient = eDimOrient; + } + if ( eDimOrient == sheet::DataPilotFieldOrientation_DATA ) + { + OUString aSourceName; + OUString aGivenName; + ScDPOutput::GetDataDimensionNames( aSourceName, aGivenName, xDim ); + try + { + uno::Any aValue = xDimProp->getPropertyValue( SC_UNO_DP_LAYOUTNAME ); + + if( aValue.hasValue() ) + { + OUString strLayoutName; + + if( ( aValue >>= strLayoutName ) && !strLayoutName.isEmpty() ) + aGivenName = strLayoutName; + } + } + catch(const uno::Exception&) + { + } + rDataNames.push_back( aSourceName ); + rGivenNames.push_back( aGivenName ); + + ++nDataCount; + } + } + } + + if ( ( rDataOrient == sheet::DataPilotFieldOrientation_COLUMN ) && bColGrand ) + rGrandTotalCols = nDataCount; + else if ( ( rDataOrient == sheet::DataPilotFieldOrientation_ROW ) && bRowGrand ) + rGrandTotalRows = nDataCount; + } +} + +} + +void ScDPOutput::GetPositionData(const ScAddress& rPos, DataPilotTablePositionData& rPosData) +{ + using namespace ::com::sun::star::sheet; + + SCCOL nCol = rPos.Col(); + SCROW nRow = rPos.Row(); + SCTAB nTab = rPos.Tab(); + if ( nTab != aStartPos.Tab() ) + return; // wrong sheet + + // calculate output positions and sizes + + CalcSizes(); + + rPosData.PositionType = GetPositionType(rPos); + switch (rPosData.PositionType) + { + case DataPilotTablePositionType::RESULT: + { + vector<DataPilotFieldFilter> aFilters; + GetDataResultPositionData(aFilters, rPos); + sal_Int32 nSize = aFilters.size(); + + DataPilotTableResultData aResData; + aResData.FieldFilters.realloc(nSize); + for (sal_Int32 i = 0; i < nSize; ++i) + aResData.FieldFilters[i] = aFilters[i]; + + aResData.DataFieldIndex = 0; + Reference<beans::XPropertySet> xPropSet(xSource, UNO_QUERY); + if (xPropSet.is()) + { + sal_Int32 nDataFieldCount = ScUnoHelpFunctions::GetLongProperty( xPropSet, + SC_UNO_DP_DATAFIELDCOUNT ); + if (nDataFieldCount > 0) + aResData.DataFieldIndex = (nRow - nDataStartRow) % nDataFieldCount; + } + + // Copy appropriate DataResult object from the cached sheet::DataResult table. + if (aData.getLength() > nRow - nDataStartRow && + aData[nRow-nDataStartRow].getLength() > nCol-nDataStartCol) + aResData.Result = aData[nRow-nDataStartRow][nCol-nDataStartCol]; + + rPosData.PositionData <<= aResData; + return; + } + case DataPilotTablePositionType::COLUMN_HEADER: + { + long nField = nRow - nTabStartRow - 1; // 1st line is used for the buttons + if (nField < 0) + break; + + const uno::Sequence<sheet::MemberResult> rSequence = pColFields[nField].maResult; + if (!rSequence.hasElements()) + break; + const sheet::MemberResult* pArray = rSequence.getConstArray(); + + long nItem = nCol - nDataStartCol; + // get origin of "continue" fields + while (nItem > 0 && ( pArray[nItem].Flags & sheet::MemberResultFlags::CONTINUE) ) + --nItem; + + if (nItem < 0) + break; + + DataPilotTableHeaderData aHeaderData; + aHeaderData.MemberName = pArray[nItem].Name; + aHeaderData.Flags = pArray[nItem].Flags; + aHeaderData.Dimension = static_cast<sal_Int32>(pColFields[nField].mnDim); + aHeaderData.Hierarchy = static_cast<sal_Int32>(pColFields[nField].mnHier); + aHeaderData.Level = static_cast<sal_Int32>(pColFields[nField].mnLevel); + + rPosData.PositionData <<= aHeaderData; + return; + } + case DataPilotTablePositionType::ROW_HEADER: + { + long nField = nCol - nTabStartCol; + if (nField < 0) + break; + + const uno::Sequence<sheet::MemberResult> rSequence = pRowFields[nField].maResult; + if (!rSequence.hasElements()) + break; + const sheet::MemberResult* pArray = rSequence.getConstArray(); + + long nItem = nRow - nDataStartRow; + // get origin of "continue" fields + while ( nItem > 0 && (pArray[nItem].Flags & sheet::MemberResultFlags::CONTINUE) ) + --nItem; + + if (nItem < 0) + break; + + DataPilotTableHeaderData aHeaderData; + aHeaderData.MemberName = pArray[nItem].Name; + aHeaderData.Flags = pArray[nItem].Flags; + aHeaderData.Dimension = static_cast<sal_Int32>(pRowFields[nField].mnDim); + aHeaderData.Hierarchy = static_cast<sal_Int32>(pRowFields[nField].mnHier); + aHeaderData.Level = static_cast<sal_Int32>(pRowFields[nField].mnLevel); + + rPosData.PositionData <<= aHeaderData; + return; + } + } +} + +bool ScDPOutput::GetDataResultPositionData(vector<sheet::DataPilotFieldFilter>& rFilters, const ScAddress& rPos) +{ + // Check to make sure there is at least one data field. + Reference<beans::XPropertySet> xPropSet(xSource, UNO_QUERY); + if (!xPropSet.is()) + return false; + + sal_Int32 nDataFieldCount = ScUnoHelpFunctions::GetLongProperty( xPropSet, + SC_UNO_DP_DATAFIELDCOUNT ); + if (nDataFieldCount == 0) + // No data field is present in this datapilot table. + return false; + + // #i111421# use lcl_GetTableVars for correct size of totals and data layout position + sal_Int32 nGrandTotalCols; + sal_Int32 nGrandTotalRows; + sal_Int32 nDataLayoutIndex; + std::vector<OUString> aDataNames; + std::vector<OUString> aGivenNames; + sheet::DataPilotFieldOrientation eDataOrient; + lcl_GetTableVars( nGrandTotalCols, nGrandTotalRows, nDataLayoutIndex, aDataNames, aGivenNames, eDataOrient, xSource ); + + SCCOL nCol = rPos.Col(); + SCROW nRow = rPos.Row(); + SCTAB nTab = rPos.Tab(); + if ( nTab != aStartPos.Tab() ) + return false; // wrong sheet + + CalcSizes(); + + // test for data area. + if (nCol < nDataStartCol || nCol > nTabEndCol || nRow < nDataStartRow || nRow > nTabEndRow) + { + // Cell is outside the data field area. + return false; + } + + bool bFilterByCol = (nCol <= static_cast<SCCOL>(nTabEndCol - nGrandTotalCols)); + bool bFilterByRow = (nRow <= static_cast<SCROW>(nTabEndRow - nGrandTotalRows)); + + // column fields + for (size_t nColField = 0; nColField < pColFields.size() && bFilterByCol; ++nColField) + { + if (pColFields[nColField].mnDim == nDataLayoutIndex) + // There is no sense including the data layout field for filtering. + continue; + + sheet::DataPilotFieldFilter filter; + filter.FieldName = pColFields[nColField].maName; + + const uno::Sequence<sheet::MemberResult> rSequence = pColFields[nColField].maResult; + const sheet::MemberResult* pArray = rSequence.getConstArray(); + + OSL_ENSURE(nDataStartCol + rSequence.getLength() - 1 == nTabEndCol, "ScDPOutput::GetDataFieldCellData: error in geometric assumption"); + + long nItem = nCol - nDataStartCol; + // get origin of "continue" fields + while ( nItem > 0 && (pArray[nItem].Flags & sheet::MemberResultFlags::CONTINUE) ) + --nItem; + + filter.MatchValueName = pArray[nItem].Name; + rFilters.push_back(filter); + } + + // row fields + for (size_t nRowField = 0; nRowField < pRowFields.size() && bFilterByRow; ++nRowField) + { + if (pRowFields[nRowField].mnDim == nDataLayoutIndex) + // There is no sense including the data layout field for filtering. + continue; + + sheet::DataPilotFieldFilter filter; + filter.FieldName = pRowFields[nRowField].maName; + + const uno::Sequence<sheet::MemberResult> rSequence = pRowFields[nRowField].maResult; + const sheet::MemberResult* pArray = rSequence.getConstArray(); + + OSL_ENSURE(nDataStartRow + rSequence.getLength() - 1 == nTabEndRow, "ScDPOutput::GetDataFieldCellData: error in geometric assumption"); + + long nItem = nRow - nDataStartRow; + // get origin of "continue" fields + while ( nItem > 0 && (pArray[nItem].Flags & sheet::MemberResultFlags::CONTINUE) ) + --nItem; + + filter.MatchValueName = pArray[nItem].Name; + rFilters.push_back(filter); + } + + return true; +} + +namespace { + +OUString lcl_GetDataFieldName( const OUString& rSourceName, sal_Int16 eFunc ) +{ + const char* pStrId = nullptr; + switch ( eFunc ) + { + case sheet::GeneralFunction2::SUM: pStrId = STR_FUN_TEXT_SUM; break; + case sheet::GeneralFunction2::COUNT: + case sheet::GeneralFunction2::COUNTNUMS: pStrId = STR_FUN_TEXT_COUNT; break; + case sheet::GeneralFunction2::AVERAGE: pStrId = STR_FUN_TEXT_AVG; break; + case sheet::GeneralFunction2::MEDIAN: pStrId = STR_FUN_TEXT_MEDIAN; break; + case sheet::GeneralFunction2::MAX: pStrId = STR_FUN_TEXT_MAX; break; + case sheet::GeneralFunction2::MIN: pStrId = STR_FUN_TEXT_MIN; break; + case sheet::GeneralFunction2::PRODUCT: pStrId = STR_FUN_TEXT_PRODUCT; break; + case sheet::GeneralFunction2::STDEV: + case sheet::GeneralFunction2::STDEVP: pStrId = STR_FUN_TEXT_STDDEV; break; + case sheet::GeneralFunction2::VAR: + case sheet::GeneralFunction2::VARP: pStrId = STR_FUN_TEXT_VAR; break; + case sheet::GeneralFunction2::NONE: + case sheet::GeneralFunction2::AUTO: break; + default: + { + assert(false); + } + } + if (!pStrId) + return OUString(); + + return ScResId(pStrId) + " - " + rSourceName; +} + +} + +void ScDPOutput::GetDataDimensionNames( + OUString& rSourceName, OUString& rGivenName, const uno::Reference<uno::XInterface>& xDim ) +{ + uno::Reference<beans::XPropertySet> xDimProp( xDim, uno::UNO_QUERY ); + uno::Reference<container::XNamed> xDimName( xDim, uno::UNO_QUERY ); + if ( xDimProp.is() && xDimName.is() ) + { + // Asterisks are added in ScDPSaveData::WriteToSource to create unique names. + //TODO: preserve original name there? + rSourceName = ScDPUtil::getSourceDimensionName(xDimName->getName()); + + // Generate "given name" the same way as in dptabres. + //TODO: Should use a stored name when available + + sal_Int16 eFunc = ScUnoHelpFunctions::GetShortProperty( + xDimProp, SC_UNO_DP_FUNCTION2, + sheet::GeneralFunction2::NONE ); + rGivenName = lcl_GetDataFieldName( rSourceName, eFunc ); + } +} + +bool ScDPOutput::IsFilterButton( const ScAddress& rPos ) +{ + SCCOL nCol = rPos.Col(); + SCROW nRow = rPos.Row(); + SCTAB nTab = rPos.Tab(); + if ( nTab != aStartPos.Tab() || !bDoFilter ) + return false; // wrong sheet or no button at all + + // filter button is at top left + return ( nCol == aStartPos.Col() && nRow == aStartPos.Row() ); +} + +long ScDPOutput::GetHeaderDim( const ScAddress& rPos, sheet::DataPilotFieldOrientation& rOrient ) +{ + SCCOL nCol = rPos.Col(); + SCROW nRow = rPos.Row(); + SCTAB nTab = rPos.Tab(); + if ( nTab != aStartPos.Tab() ) + return -1; // wrong sheet + + // calculate output positions and sizes + + CalcSizes(); + + // test for column header + + if ( nRow == nTabStartRow && nCol >= nDataStartCol && o3tl::make_unsigned(nCol) < nDataStartCol + pColFields.size()) + { + rOrient = sheet::DataPilotFieldOrientation_COLUMN; + long nField = nCol - nDataStartCol; + return pColFields[nField].mnDim; + } + + // test for row header + + if ( nRow+1 == nDataStartRow && nCol >= nTabStartCol && o3tl::make_unsigned(nCol) < nTabStartCol + pRowFields.size() ) + { + rOrient = sheet::DataPilotFieldOrientation_ROW; + long nField = nCol - nTabStartCol; + return pRowFields[nField].mnDim; + } + + // test for page field + + SCROW nPageStartRow = aStartPos.Row() + ( bDoFilter ? 1 : 0 ); + if ( nCol == aStartPos.Col() && nRow >= nPageStartRow && o3tl::make_unsigned(nRow) < nPageStartRow + pPageFields.size() ) + { + rOrient = sheet::DataPilotFieldOrientation_PAGE; + long nField = nRow - nPageStartRow; + return pPageFields[nField].mnDim; + } + + //TODO: single data field (?) + + rOrient = sheet::DataPilotFieldOrientation_HIDDEN; + return -1; // invalid +} + +bool ScDPOutput::GetHeaderDrag( const ScAddress& rPos, bool bMouseLeft, bool bMouseTop, + long nDragDim, + tools::Rectangle& rPosRect, sheet::DataPilotFieldOrientation& rOrient, long& rDimPos ) +{ + // Rectangle instead of ScRange for rPosRect to allow for negative values + + SCCOL nCol = rPos.Col(); + SCROW nRow = rPos.Row(); + SCTAB nTab = rPos.Tab(); + if ( nTab != aStartPos.Tab() ) + return false; // wrong sheet + + // calculate output positions and sizes + + CalcSizes(); + + // test for column header + + if ( nCol >= nDataStartCol && nCol <= nTabEndCol && + nRow + 1 >= nMemberStartRow && o3tl::make_unsigned(nRow) < nMemberStartRow + pColFields.size()) + { + long nField = nRow - nMemberStartRow; + if (nField < 0) + { + nField = 0; + bMouseTop = true; + } + //TODO: find start of dimension + + rPosRect = tools::Rectangle( nDataStartCol, nMemberStartRow + nField, + nTabEndCol, nMemberStartRow + nField -1 ); + + bool bFound = false; // is this within the same orientation? + bool bBeforeDrag = false; + bool bAfterDrag = false; + for (long nPos=0; o3tl::make_unsigned(nPos)<pColFields.size() && !bFound; nPos++) + { + if (pColFields[nPos].mnDim == nDragDim) + { + bFound = true; + if ( nField < nPos ) + bBeforeDrag = true; + else if ( nField > nPos ) + bAfterDrag = true; + } + } + + if ( bFound ) + { + if (!bBeforeDrag) + { + rPosRect.AdjustBottom( 1 ); + if (bAfterDrag) + rPosRect.AdjustTop( 1 ); + } + } + else + { + if ( !bMouseTop ) + { + rPosRect.AdjustTop( 1 ); + rPosRect.AdjustBottom( 1 ); + ++nField; + } + } + + rOrient = sheet::DataPilotFieldOrientation_COLUMN; + rDimPos = nField; //!... + return true; + } + + // test for row header + + // special case if no row fields + bool bSpecial = ( nRow+1 >= nDataStartRow && nRow <= nTabEndRow && + pRowFields.empty() && nCol == nTabStartCol && bMouseLeft ); + + if ( bSpecial || ( nRow+1 >= nDataStartRow && nRow <= nTabEndRow && + nCol + 1 >= nTabStartCol && o3tl::make_unsigned(nCol) < nTabStartCol + pRowFields.size() ) ) + { + long nField = nCol - nTabStartCol; + //TODO: find start of dimension + + rPosRect = tools::Rectangle( nTabStartCol + nField, nDataStartRow - 1, + nTabStartCol + nField - 1, nTabEndRow ); + + bool bFound = false; // is this within the same orientation? + bool bBeforeDrag = false; + bool bAfterDrag = false; + for (long nPos=0; o3tl::make_unsigned(nPos)<pRowFields.size() && !bFound; nPos++) + { + if (pRowFields[nPos].mnDim == nDragDim) + { + bFound = true; + if ( nField < nPos ) + bBeforeDrag = true; + else if ( nField > nPos ) + bAfterDrag = true; + } + } + + if ( bFound ) + { + if (!bBeforeDrag) + { + rPosRect.AdjustRight( 1 ); + if (bAfterDrag) + rPosRect.AdjustLeft( 1 ); + } + } + else + { + if ( !bMouseLeft ) + { + rPosRect.AdjustLeft( 1 ); + rPosRect.AdjustRight( 1 ); + ++nField; + } + } + + rOrient = sheet::DataPilotFieldOrientation_ROW; + rDimPos = nField; //!... + return true; + } + + // test for page fields + + SCROW nPageStartRow = aStartPos.Row() + ( bDoFilter ? 1 : 0 ); + if ( nCol >= aStartPos.Col() && nCol <= nTabEndCol && + nRow + 1 >= nPageStartRow && o3tl::make_unsigned(nRow) < nPageStartRow + pPageFields.size() ) + { + long nField = nRow - nPageStartRow; + if (nField < 0) + { + nField = 0; + bMouseTop = true; + } + //TODO: find start of dimension + + rPosRect = tools::Rectangle( aStartPos.Col(), nPageStartRow + nField, + nTabEndCol, nPageStartRow + nField - 1 ); + + bool bFound = false; // is this within the same orientation? + bool bBeforeDrag = false; + bool bAfterDrag = false; + for (long nPos=0; o3tl::make_unsigned(nPos)<pPageFields.size() && !bFound; nPos++) + { + if (pPageFields[nPos].mnDim == nDragDim) + { + bFound = true; + if ( nField < nPos ) + bBeforeDrag = true; + else if ( nField > nPos ) + bAfterDrag = true; + } + } + + if ( bFound ) + { + if (!bBeforeDrag) + { + rPosRect.AdjustBottom( 1 ); + if (bAfterDrag) + rPosRect.AdjustTop( 1 ); + } + } + else + { + if ( !bMouseTop ) + { + rPosRect.AdjustTop( 1 ); + rPosRect.AdjustBottom( 1 ); + ++nField; + } + } + + rOrient = sheet::DataPilotFieldOrientation_PAGE; + rDimPos = nField; //!... + return true; + } + + return false; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |