diff options
Diffstat (limited to 'sc/source/ui/docshell/dbdocimp.cxx')
| -rw-r--r-- | sc/source/ui/docshell/dbdocimp.cxx | 627 |
1 files changed, 627 insertions, 0 deletions
diff --git a/sc/source/ui/docshell/dbdocimp.cxx b/sc/source/ui/docshell/dbdocimp.cxx new file mode 100644 index 000000000..76d8333cd --- /dev/null +++ b/sc/source/ui/docshell/dbdocimp.cxx @@ -0,0 +1,627 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <vcl/errinf.hxx> +#include <comphelper/processfactory.hxx> +#include <comphelper/types.hxx> +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> +#include <svx/dataaccessdescriptor.hxx> +#include <sfx2/viewfrm.hxx> +#include <sal/log.hxx> +#include <osl/diagnose.h> + +#include <com/sun/star/sdb/CommandType.hpp> +#include <com/sun/star/sdb/XCompletedExecution.hpp> +#include <com/sun/star/sdbc/SQLException.hpp> +#include <com/sun/star/sdbc/XRow.hpp> +#include <com/sun/star/sdbc/XRowSet.hpp> +#include <com/sun/star/sdbc/XResultSetMetaDataSupplier.hpp> +#include <com/sun/star/sdbcx/XRowLocate.hpp> +#include <com/sun/star/task/InteractionHandler.hpp> +#include <com/sun/star/lang/XMultiServiceFactory.hpp> +#include <com/sun/star/beans/XPropertySet.hpp> +#include <com/sun/star/frame/FrameSearchFlag.hpp> +#include <com/sun/star/view/XSelectionSupplier.hpp> + +#include <dbdocfun.hxx> +#include <docsh.hxx> +#include <globstr.hrc> +#include <scresid.hxx> +#include <scerrors.hxx> +#include <dbdata.hxx> +#include <markdata.hxx> +#include <undodat.hxx> +#include <progress.hxx> +#include <patattr.hxx> +#include <docpool.hxx> +#include <attrib.hxx> +#include <dbdocutl.hxx> +#include <editable.hxx> +#include <hints.hxx> +#include <miscuno.hxx> +#include <chgtrack.hxx> +#include <refupdatecontext.hxx> + +using namespace com::sun::star; + +#define SC_SERVICE_ROWSET "com.sun.star.sdb.RowSet" + +//! move to a header file? +#define SC_DBPROP_DATASOURCENAME "DataSourceName" +#define SC_DBPROP_COMMAND "Command" +#define SC_DBPROP_COMMANDTYPE "CommandType" + +void ScDBDocFunc::ShowInBeamer( const ScImportParam& rParam, const SfxViewFrame* pFrame ) +{ + // called after opening the database beamer + + if ( !pFrame || !rParam.bImport ) + return; + + uno::Reference<frame::XFrame> xFrame = pFrame->GetFrame().GetFrameInterface(); + + uno::Reference<frame::XFrame> xBeamerFrame = xFrame->findFrame( + "_beamer", + frame::FrameSearchFlag::CHILDREN); + if (xBeamerFrame.is()) + { + uno::Reference<frame::XController> xController = xBeamerFrame->getController(); + uno::Reference<view::XSelectionSupplier> xControllerSelection(xController, uno::UNO_QUERY); + if (xControllerSelection.is()) + { + sal_Int32 nType = rParam.bSql ? sdb::CommandType::COMMAND : + ( (rParam.nType == ScDbQuery) ? sdb::CommandType::QUERY : + sdb::CommandType::TABLE ); + + svx::ODataAccessDescriptor aSelection; + aSelection.setDataSource(rParam.aDBName); + aSelection[svx::DataAccessDescriptorProperty::Command] <<= rParam.aStatement; + aSelection[svx::DataAccessDescriptorProperty::CommandType] <<= nType; + + xControllerSelection->select(uno::makeAny(aSelection.createPropertyValueSequence())); + } + else + { + OSL_FAIL("no selection supplier in the beamer!"); + } + } +} + +void ScDBDocFunc::DoImportUno( const ScAddress& rPos, + const uno::Sequence<beans::PropertyValue>& aArgs ) +{ + svx::ODataAccessDescriptor aDesc( aArgs ); // includes selection and result set + + // create database range + ScDBData* pDBData = rDocShell.GetDBData( ScRange(rPos), SC_DB_IMPORT, ScGetDBSelection::Keep ); + DBG_ASSERT(pDBData, "can't create DB data"); + OUString sTarget = pDBData->GetName(); + + UpdateImport( sTarget, aDesc ); +} + +bool ScDBDocFunc::DoImport( SCTAB nTab, const ScImportParam& rParam, + const svx::ODataAccessDescriptor* pDescriptor ) +{ + ScDocument& rDoc = rDocShell.GetDocument(); + ScChangeTrack *pChangeTrack = nullptr; + ScRange aChangedRange; + + bool bRecord = true; + if (!rDoc.IsUndoEnabled()) + bRecord = false; + + ScDBData* pDBData = rDoc.GetDBAtArea( nTab, rParam.nCol1, rParam.nRow1, + rParam.nCol2, rParam.nRow2 ); + if (!pDBData) + { + OSL_FAIL( "DoImport: no DBData" ); + return false; + } + + std::unique_ptr<weld::WaitObject> xWaitWin(new weld::WaitObject(ScDocShell::GetActiveDialogParent())); + ScDocShellModificator aModificator( rDocShell ); + + bool bSuccess = false; + bool bTruncated = false; // for warning + const char* pErrStringId = nullptr; + OUString aErrorMessage; + + SCCOL nCol = rParam.nCol1; + SCROW nRow = rParam.nRow1; + SCCOL nEndCol = nCol; // end of resulting database area + SCROW nEndRow = nRow; + + bool bDoSelection = false; + bool bRealSelection = false; // sal_True if not everything is selected + bool bBookmarkSelection = false; + sal_Int32 nListPos = 0; + sal_Int32 nRowsRead = 0; + sal_Int32 nListCount = 0; + + uno::Sequence<uno::Any> aSelection; + if ( pDescriptor && pDescriptor->has(svx::DataAccessDescriptorProperty::Selection) ) + { + (*pDescriptor)[svx::DataAccessDescriptorProperty::Selection] >>= aSelection; + nListCount = aSelection.getLength(); + if ( nListCount > 0 ) + { + bDoSelection = true; + if ( pDescriptor->has(svx::DataAccessDescriptorProperty::BookmarkSelection) ) + bBookmarkSelection = ScUnoHelpFunctions::GetBoolFromAny( (*pDescriptor)[svx::DataAccessDescriptorProperty::BookmarkSelection] ); + if ( bBookmarkSelection ) + { + // From bookmarks, there's no way to detect if all records are selected. + // Rely on base to pass no selection in that case. + bRealSelection = true; + } + } + } + + uno::Reference<sdbc::XResultSet> xResultSet; + if ( pDescriptor && pDescriptor->has(svx::DataAccessDescriptorProperty::Cursor) ) + xResultSet.set((*pDescriptor)[svx::DataAccessDescriptorProperty::Cursor], uno::UNO_QUERY); + + // ImportDoc - also used for Redo + ScDocumentUniquePtr pImportDoc(new ScDocument( SCDOCMODE_UNDO )); + pImportDoc->InitUndo( &rDoc, nTab, nTab ); + + // get data from database into import document + + try + { + // progress bar + // only text (title is still needed, for the cancel button) + ScProgress aProgress( &rDocShell, ScResId(STR_UNDO_IMPORTDATA), 0, true ); + + uno::Reference<sdbc::XRowSet> xRowSet( xResultSet, uno::UNO_QUERY ); + bool bDispose = false; + if ( !xRowSet.is() ) + { + bDispose = true; + xRowSet.set(comphelper::getProcessServiceFactory()->createInstance( + SC_SERVICE_ROWSET ), + uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xRowProp( xRowSet, uno::UNO_QUERY ); + OSL_ENSURE( xRowProp.is(), "can't get RowSet" ); + if ( xRowProp.is() ) + { + + // set source parameters + + sal_Int32 nType = rParam.bSql ? sdb::CommandType::COMMAND : + ( (rParam.nType == ScDbQuery) ? sdb::CommandType::QUERY : + sdb::CommandType::TABLE ); + + xRowProp->setPropertyValue( SC_DBPROP_DATASOURCENAME, uno::Any(rParam.aDBName) ); + + xRowProp->setPropertyValue( SC_DBPROP_COMMAND, uno::Any(rParam.aStatement) ); + + xRowProp->setPropertyValue( SC_DBPROP_COMMANDTYPE, uno::Any(nType) ); + + uno::Reference<sdb::XCompletedExecution> xExecute( xRowSet, uno::UNO_QUERY ); + if ( xExecute.is() ) + { + uno::Reference<task::XInteractionHandler> xHandler( + task::InteractionHandler::createWithParent(comphelper::getProcessComponentContext(), nullptr), + uno::UNO_QUERY_THROW); + xExecute->executeWithCompletion( xHandler ); + } + else + xRowSet->execute(); + } + } + if ( xRowSet.is() ) + { + + // get column descriptions + + long nColCount = 0; + uno::Reference<sdbc::XResultSetMetaData> xMeta; + uno::Reference<sdbc::XResultSetMetaDataSupplier> xMetaSupp( xRowSet, uno::UNO_QUERY ); + if ( xMetaSupp.is() ) + xMeta = xMetaSupp->getMetaData(); + if ( xMeta.is() ) + nColCount = xMeta->getColumnCount(); // this is the number of real columns + + if ( rParam.nCol1 + nColCount - 1 > rDoc.MaxCol() ) + { + nColCount = 0; + //! error message + } + + uno::Reference<sdbcx::XRowLocate> xLocate; + if ( bBookmarkSelection ) + { + xLocate.set( xRowSet, uno::UNO_QUERY ); + if ( !xLocate.is() ) + { + SAL_WARN( "sc.ui","can't get XRowLocate"); + bDoSelection = bRealSelection = bBookmarkSelection = false; + } + } + + uno::Reference<sdbc::XRow> xRow( xRowSet, uno::UNO_QUERY ); + if ( nColCount > 0 && xRow.is() ) + { + nEndCol = static_cast<SCCOL>( rParam.nCol1 + nColCount - 1 ); + + uno::Sequence<sal_Int32> aColTypes( nColCount ); // column types + uno::Sequence<sal_Bool> aColCurr( nColCount ); // currency flag is not in types + sal_Int32* pTypeArr = aColTypes.getArray(); + sal_Bool* pCurrArr = aColCurr.getArray(); + for (long i=0; i<nColCount; i++) + { + pTypeArr[i] = xMeta->getColumnType( i+1 ); + pCurrArr[i] = xMeta->isCurrency( i+1 ); + } + + // read column names + nCol = rParam.nCol1; + for (long i=0; i<nColCount; i++) + { + pImportDoc->SetString( nCol, nRow, nTab, + xMeta->getColumnLabel( i+1 ) ); + ++nCol; + } + ++nRow; + + bool bEnd = false; + if ( !bDoSelection ) + xRowSet->beforeFirst(); + sal_uInt16 nInserted = 0; + while ( !bEnd ) + { + // skip rows that are not selected + if ( !bDoSelection ) + { + bEnd = !xRowSet->next(); + if ( !bEnd ) + ++nRowsRead; + } + else + { + if (nListPos < nListCount) + { + if ( bBookmarkSelection ) + { + bEnd = !xLocate->moveToBookmark(aSelection[nListPos]); + } + else // use record numbers + { + sal_Int32 nNextRow = 0; + aSelection[nListPos] >>= nNextRow; + if ( nRowsRead+1 < nNextRow ) + bRealSelection = true; + nRowsRead = nNextRow; + bEnd = !xRowSet->absolute(nRowsRead); + } + ++nListPos; + } + else + { + if ( !bBookmarkSelection && xRowSet->next() ) + bRealSelection = true; // more data available but not used + bEnd = true; + } + } + + if ( !bEnd ) + { + if ( rDoc.ValidRow(nRow) ) + { + nCol = rParam.nCol1; + for (long i=0; i<nColCount; i++) + { + ScDatabaseDocUtil::PutData( pImportDoc.get(), nCol, nRow, nTab, + xRow, i+1, pTypeArr[i], pCurrArr[i] ); + ++nCol; + } + nEndRow = nRow; + ++nRow; + + // progress bar + + ++nInserted; + if (!(nInserted & 15)) + { + aProgress.SetState( 0 ); + } + } + else // past the end of the spreadsheet + { + bEnd = true; // don't continue + bTruncated = true; // warning flag + } + } + } + + bSuccess = true; + } + + if ( bDispose ) + ::comphelper::disposeComponent( xRowSet ); + } + } + catch ( const sdbc::SQLException& rError ) + { + aErrorMessage = rError.Message; + } + catch ( uno::Exception& ) + { + OSL_FAIL("Unexpected exception in database"); + } + + // test for cell protection + + bool bKeepFormat = pDBData->IsKeepFmt(); + bool bMoveCells = pDBData->IsDoSize(); + SCCOL nFormulaCols = 0; // columns to be filled with formulas + if (bMoveCells && nEndCol == rParam.nCol2) + { + // if column count changes, formulas would become invalid anyway + // -> only set nFormulaCols for unchanged column count + + SCCOL nTestCol = rParam.nCol2 + 1; // right of the data + SCROW nTestRow = rParam.nRow1 + 1; // below the title row + while ( nTestCol <= rDoc.MaxCol() && + rDoc.GetCellType(ScAddress( nTestCol, nTestRow, nTab )) == CELLTYPE_FORMULA ) + { + ++nTestCol; + ++nFormulaCols; + } + } + + if (bSuccess) + { + // old and new range editable? + ScEditableTester aTester; + aTester.TestBlock( &rDoc, nTab, rParam.nCol1,rParam.nRow1,rParam.nCol2,rParam.nRow2 ); + aTester.TestBlock( &rDoc, nTab, rParam.nCol1,rParam.nRow1,nEndCol,nEndRow ); + if ( !aTester.IsEditable() ) + { + pErrStringId = aTester.GetMessageId(); + bSuccess = false; + } + else if ( (pChangeTrack = rDoc.GetChangeTrack()) != nullptr ) + aChangedRange = ScRange(rParam.nCol1, rParam.nRow1, nTab, + nEndCol+nFormulaCols, nEndRow, nTab ); + } + + if ( bSuccess && bMoveCells ) + { + ScRange aOld( rParam.nCol1, rParam.nRow1, nTab, + rParam.nCol2+nFormulaCols, rParam.nRow2, nTab ); + ScRange aNew( rParam.nCol1, rParam.nRow1, nTab, + nEndCol+nFormulaCols, nEndRow, nTab ); + if (!rDoc.CanFitBlock( aOld, aNew )) + { + pErrStringId = STR_MSSG_DOSUBTOTALS_2; // can't insert cells + bSuccess = false; + } + } + + // copy data from import doc into real document + + if ( bSuccess ) + { + if (bKeepFormat) + { + // keep formatting of title and first data row from the document + // CopyToDocument also copies styles, Apply... needs separate calls + + SCCOL nMinEndCol = std::min( rParam.nCol2, nEndCol ); // not too much + nMinEndCol = sal::static_int_cast<SCCOL>( nMinEndCol + nFormulaCols ); // only if column count unchanged + pImportDoc->DeleteAreaTab( 0,0, rDoc.MaxCol(),rDoc.MaxRow(), nTab, InsertDeleteFlags::ATTRIB ); + rDoc.CopyToDocument(rParam.nCol1, rParam.nRow1, nTab, + nMinEndCol, rParam.nRow1, nTab, + InsertDeleteFlags::ATTRIB, false, *pImportDoc); + + SCROW nDataStartRow = rParam.nRow1+1; + for (SCCOL nCopyCol=rParam.nCol1; nCopyCol<=nMinEndCol; nCopyCol++) + { + const ScPatternAttr* pSrcPattern = rDoc.GetPattern( + nCopyCol, nDataStartRow, nTab ); + pImportDoc->ApplyPatternAreaTab( nCopyCol, nDataStartRow, nCopyCol, nEndRow, + nTab, *pSrcPattern ); + const ScStyleSheet* pStyle = pSrcPattern->GetStyleSheet(); + if (pStyle) + pImportDoc->ApplyStyleAreaTab( nCopyCol, nDataStartRow, nCopyCol, nEndRow, + nTab, *pStyle ); + } + } + + // don't set cell protection attribute if table is protected + if (rDoc.IsTabProtected(nTab)) + { + ScPatternAttr aPattern(pImportDoc->GetPool()); + aPattern.GetItemSet().Put( ScProtectionAttr( false,false,false,false ) ); + pImportDoc->ApplyPatternAreaTab( 0,0,rDoc.MaxCol(),rDoc.MaxRow(), nTab, aPattern ); + } + + // copy old data for undo + + SCCOL nUndoEndCol = std::max( nEndCol, rParam.nCol2 ); // rParam = old end + SCROW nUndoEndRow = std::max( nEndRow, rParam.nRow2 ); + + ScDocumentUniquePtr pUndoDoc; + std::unique_ptr<ScDBData> pUndoDBData; + if ( bRecord ) + { + pUndoDoc.reset(new ScDocument( SCDOCMODE_UNDO )); + pUndoDoc->InitUndo( &rDoc, nTab, nTab ); + + pUndoDBData.reset(new ScDBData( *pDBData )); + } + + ScMarkData aNewMark(rDoc.MaxRow(), rDoc.MaxCol()); + aNewMark.SelectOneTable( nTab ); + + if (bRecord) + { + // do not touch notes (ScUndoImportData does not support drawing undo) + InsertDeleteFlags nCopyFlags = InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE; + + // nFormulaCols is set only if column count is unchanged + rDoc.CopyToDocument(rParam.nCol1, rParam.nRow1, nTab, + nEndCol+nFormulaCols, nEndRow, nTab, + nCopyFlags, false, *pUndoDoc); + if ( rParam.nCol2 > nEndCol ) + rDoc.CopyToDocument(nEndCol+1, rParam.nRow1, nTab, + nUndoEndCol, nUndoEndRow, nTab, + nCopyFlags, false, *pUndoDoc); + if ( rParam.nRow2 > nEndRow ) + rDoc.CopyToDocument(rParam.nCol1, nEndRow+1, nTab, + nUndoEndCol+nFormulaCols, nUndoEndRow, nTab, + nCopyFlags, false, *pUndoDoc); + } + + // move new data + + if (bMoveCells) + { + // clear only the range without the formulas, + // so the formula title and first row are preserved + + ScRange aDelRange( rParam.nCol1, rParam.nRow1, nTab, + rParam.nCol2, rParam.nRow2, nTab ); + rDoc.DeleteAreaTab( aDelRange, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE ); // without the formulas + + ScRange aOld( rParam.nCol1, rParam.nRow1, nTab, + rParam.nCol2+nFormulaCols, rParam.nRow2, nTab ); + ScRange aNew( rParam.nCol1, rParam.nRow1, nTab, + nEndCol+nFormulaCols, nEndRow, nTab ); + rDoc.FitBlock( aOld, aNew, false ); // Do not delete formulas + } + else if ( nEndCol < rParam.nCol2 ) // DeleteArea calls PutInOrder + rDoc.DeleteArea( nEndCol+1, rParam.nRow1, rParam.nCol2, rParam.nRow2, + aNewMark, InsertDeleteFlags::CONTENTS & ~InsertDeleteFlags::NOTE ); + + // CopyToDocument doesn't remove contents + rDoc.DeleteAreaTab( rParam.nCol1, rParam.nRow1, nEndCol, nEndRow, nTab, InsertDeleteFlags::CONTENTS & ~InsertDeleteFlags::NOTE ); + + // remove each column from ImportDoc after copying to reduce memory usage + bool bOldAutoCalc = rDoc.GetAutoCalc(); + rDoc.SetAutoCalc( false ); // outside of the loop + for (SCCOL nCopyCol = rParam.nCol1; nCopyCol <= nEndCol; nCopyCol++) + { + pImportDoc->CopyToDocument(nCopyCol, rParam.nRow1, nTab, nCopyCol, nEndRow, nTab, + InsertDeleteFlags::ALL, false, rDoc); + pImportDoc->DeleteAreaTab( nCopyCol, rParam.nRow1, nCopyCol, nEndRow, nTab, InsertDeleteFlags::CONTENTS ); + } + rDoc.SetAutoCalc( bOldAutoCalc ); + + if (nFormulaCols > 0) // copy formulas + { + if (bKeepFormat) // formats for formulas + pImportDoc->CopyToDocument(nEndCol+1, rParam.nRow1, nTab, + nEndCol+nFormulaCols, nEndRow, nTab, + InsertDeleteFlags::ATTRIB, false, rDoc); + // fill formulas + ScMarkData aMark(rDoc.MaxRow(), rDoc.MaxCol()); + aMark.SelectOneTable(nTab); + + sal_uLong nProgCount = nFormulaCols; + nProgCount *= nEndRow-rParam.nRow1-1; + ScProgress aProgress( rDoc.GetDocumentShell(), + ScResId(STR_FILL_SERIES_PROGRESS), nProgCount, true ); + + rDoc.Fill( nEndCol+1, rParam.nRow1+1, nEndCol+nFormulaCols, rParam.nRow1+1, + &aProgress, aMark, nEndRow-rParam.nRow1-1, FILL_TO_BOTTOM, FILL_SIMPLE ); + } + + // if new range is smaller, clear old contents + + if (!bMoveCells) // move has happened above + { + if ( rParam.nCol2 > nEndCol ) + rDoc.DeleteArea( nEndCol+1, rParam.nRow1, rParam.nCol2, rParam.nRow2, + aNewMark, InsertDeleteFlags::CONTENTS ); + if ( rParam.nRow2 > nEndRow ) + rDoc.DeleteArea( rParam.nCol1, nEndRow+1, rParam.nCol2, rParam.nRow2, + aNewMark, InsertDeleteFlags::CONTENTS ); + } + + // update database range + pDBData->SetImportParam( rParam ); + pDBData->SetHeader( true ); + pDBData->SetByRow( true ); + pDBData->SetArea( nTab, rParam.nCol1,rParam.nRow1, nEndCol,nEndRow ); + pDBData->SetImportSelection( bRealSelection ); + rDoc.CompileDBFormula(); + + if (bRecord) + { + ScDocumentUniquePtr pRedoDoc = std::move(pImportDoc); + + if (nFormulaCols > 0) // include filled formulas for redo + rDoc.CopyToDocument(rParam.nCol1, rParam.nRow1, nTab, + nEndCol+nFormulaCols, nEndRow, nTab, + InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE, false, *pRedoDoc); + + std::unique_ptr<ScDBData> pRedoDBData(new ScDBData(*pDBData)); + + rDocShell.GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoImportData>( &rDocShell, nTab, + rParam, nUndoEndCol, nUndoEndRow, + nFormulaCols, + std::move(pUndoDoc), std::move(pRedoDoc), + std::move(pUndoDBData), std::move(pRedoDBData) ) ); + } + + sc::SetFormulaDirtyContext aCxt; + rDoc.SetAllFormulasDirty(aCxt); + rDocShell.PostPaint(ScRange(0, 0, nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab), PaintPartFlags::Grid); + aModificator.SetDocumentModified(); + + ScDBRangeRefreshedHint aHint( rParam ); + rDoc.BroadcastUno( aHint ); + + xWaitWin.reset(); + + if ( bTruncated ) // show warning + ErrorHandler::HandleError(SCWARN_IMPORT_RANGE_OVERFLOW); + } + else + { + xWaitWin.reset(); + + if (aErrorMessage.isEmpty()) + { + if (!pErrStringId) + pErrStringId = STR_MSSG_IMPORTDATA_0; + aErrorMessage = ScResId(pErrStringId); + } + + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(ScDocShell::GetActiveDialogParent(), + VclMessageType::Info, VclButtonsType::Ok, + aErrorMessage)); + xInfoBox->run(); + } + + pImportDoc.reset(); + + if (bSuccess && pChangeTrack) + pChangeTrack->AppendInsert ( aChangedRange ); + + return bSuccess; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |