diff options
Diffstat (limited to '')
-rw-r--r-- | sc/source/ui/docshell/docsh6.cxx | 520 |
1 files changed, 520 insertions, 0 deletions
diff --git a/sc/source/ui/docshell/docsh6.cxx b/sc/source/ui/docshell/docsh6.cxx new file mode 100644 index 000000000..103d05e95 --- /dev/null +++ b/sc/source/ui/docshell/docsh6.cxx @@ -0,0 +1,520 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <scitems.hxx> + +#include <svx/pageitem.hxx> +#include <sfx2/linkmgr.hxx> + +#include <docsh.hxx> + +#include <stlpool.hxx> +#include <global.hxx> +#include <viewdata.hxx> +#include <tabvwsh.hxx> +#include <tablink.hxx> +#include <globstr.hrc> +#include <scresid.hxx> +#include <scmod.hxx> +#include <compiler.hxx> +#include <interpre.hxx> +#include <formulaopt.hxx> + +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> + +#include <memory> +#include <utility> + +namespace { + +struct ScStylePair +{ + SfxStyleSheetBase *pSource; + SfxStyleSheetBase *pDest; +}; + +} + +// Ole + +void ScDocShell::SetVisArea( const tools::Rectangle & rVisArea ) +{ + // with the SnapVisArea call in SetVisAreaOrSize, it's safe to always + // use both the size and position of the VisArea + SetVisAreaOrSize( rVisArea ); +} + +static void lcl_SetTopRight( tools::Rectangle& rRect, const Point& rPos ) +{ + Size aSize = rRect.GetSize(); + rRect.SetRight( rPos.X() ); + rRect.SetLeft( rPos.X() - aSize.Width() + 1 ); + rRect.SetTop( rPos.Y() ); + rRect.SetBottom( rPos.Y() + aSize.Height() - 1 ); +} + +void ScDocShell::SetVisAreaOrSize( const tools::Rectangle& rVisArea ) +{ + bool bNegativePage = m_aDocument.IsNegativePage( m_aDocument.GetVisibleTab() ); + + tools::Rectangle aArea = rVisArea; + // when loading, don't check for negative values, because the sheet orientation + // might be set later + if ( !m_aDocument.IsImportingXML() ) + { + if ( ( bNegativePage ? (aArea.Right() > 0) : (aArea.Left() < 0) ) || aArea.Top() < 0 ) + { + // VisArea start position can't be negative. + // Move the VisArea, otherwise only the upper left position would + // be changed in SnapVisArea, and the size would be wrong. + + Point aNewPos( 0, std::max( aArea.Top(), long(0) ) ); + if ( bNegativePage ) + { + aNewPos.setX( std::min( aArea.Right(), long(0) ) ); + lcl_SetTopRight( aArea, aNewPos ); + } + else + { + aNewPos.setX( std::max( aArea.Left(), long(0) ) ); + aArea.SetPos( aNewPos ); + } + } + } + + // adjust position here! + + // when loading an ole object, the VisArea is set from the document's + // view settings and must be used as-is (document content may not be complete yet). + if ( !m_aDocument.IsImportingXML() ) + SnapVisArea( aArea ); + + //TODO/LATER: it's unclear which IPEnv is used here + /* + SvInPlaceEnvironment* pEnv = GetIPEnv(); + if (pEnv) + { + vcl::Window* pWin = pEnv->GetEditWin(); + pEnv->MakeScale( aArea.GetSize(), MapUnit::Map100thMM, + pWin->LogicToPixel( aArea.GetSize() ) ); + } */ + + //TODO/LATER: formerly in SvInplaceObject + SfxObjectShell::SetVisArea( aArea ); + + if (m_bIsInplace) // adjust zoom in the InPlace View + { + ScTabViewShell* pViewSh = ScTabViewShell::GetActiveViewShell(); + if (pViewSh) + { + if (pViewSh->GetViewData().GetDocShell() == this) + pViewSh->UpdateOleZoom(); + } + } + + if (m_aDocument.IsEmbedded()) + { + ScRange aOld; + m_aDocument.GetEmbedded( aOld); + m_aDocument.SetEmbedded( m_aDocument.GetVisibleTab(), aArea ); + ScRange aNew; + m_aDocument.GetEmbedded( aNew); + if (aOld != aNew) + PostPaint(0,0,0,m_aDocument.MaxCol(),m_aDocument.MaxRow(),MAXTAB,PaintPartFlags::Grid); + + //TODO/LATER: currently not implemented + //ViewChanged( ASPECT_CONTENT ); // show in the container as well + } +} + +bool ScDocShell::IsOle() const +{ + return (GetCreateMode() == SfxObjectCreateMode::EMBEDDED); +} + +void ScDocShell::UpdateOle( const ScViewData* pViewData, bool bSnapSize ) +{ + // if it isn't Ole at all, one can be spared the calculations + // (VisArea will then be reset at the save) + + if (GetCreateMode() == SfxObjectCreateMode::STANDARD) + return; + + OSL_ENSURE(pViewData,"pViewData==0 at ScDocShell::UpdateOle"); + + tools::Rectangle aOldArea = SfxObjectShell::GetVisArea(); + tools::Rectangle aNewArea = aOldArea; + + bool bEmbedded = m_aDocument.IsEmbedded(); + if (bEmbedded) + aNewArea = m_aDocument.GetEmbeddedRect(); + else + { + SCTAB nTab = pViewData->GetTabNo(); + if ( nTab != m_aDocument.GetVisibleTab() ) + m_aDocument.SetVisibleTab( nTab ); + + bool bNegativePage = m_aDocument.IsNegativePage( nTab ); + SCCOL nX = pViewData->GetPosX(SC_SPLIT_LEFT); + if ( nX != m_aDocument.GetPosLeft() ) + m_aDocument.SetPosLeft( nX ); + SCROW nY = pViewData->GetPosY(SC_SPLIT_BOTTOM); + if ( nY != m_aDocument.GetPosTop() ) + m_aDocument.SetPosTop( nY ); + tools::Rectangle aMMRect = m_aDocument.GetMMRect( nX,nY, nX,nY, nTab ); + if (bNegativePage) + lcl_SetTopRight( aNewArea, aMMRect.TopRight() ); + else + aNewArea.SetPos( aMMRect.TopLeft() ); + if (bSnapSize) + SnapVisArea(aNewArea); // uses the new VisibleTab + } + + if (aNewArea != aOldArea) + SetVisAreaOrSize( aNewArea ); // the start must also be adjusted here +} + +// Style stuff for Organizer, etc. + +SfxStyleSheetBasePool* ScDocShell::GetStyleSheetPool() +{ + return static_cast<SfxStyleSheetBasePool*>(m_aDocument.GetStyleSheetPool()); +} + +// After loading styles from another document (LoadStyles, Insert), the SetItems +// (ATTR_PAGE_HEADERSET, ATTR_PAGE_FOOTERSET) must be converted to the correct pool +// before the source pool is deleted. + +static void lcl_AdjustPool( SfxStyleSheetBasePool* pStylePool ) +{ + SfxStyleSheetBase *pStyle = pStylePool->First(SfxStyleFamily::Page); + while ( pStyle ) + { + SfxItemSet& rStyleSet = pStyle->GetItemSet(); + + const SfxPoolItem* pItem; + if (rStyleSet.GetItemState(ATTR_PAGE_HEADERSET,false,&pItem) == SfxItemState::SET) + { + const SfxItemSet& rSrcSet = static_cast<const SvxSetItem*>(pItem)->GetItemSet(); + auto pDestSet = std::make_unique<SfxItemSet>(*rStyleSet.GetPool(),rSrcSet.GetRanges()); + pDestSet->Put(rSrcSet); + rStyleSet.Put(SvxSetItem(ATTR_PAGE_HEADERSET,std::move(pDestSet))); + } + if (rStyleSet.GetItemState(ATTR_PAGE_FOOTERSET,false,&pItem) == SfxItemState::SET) + { + const SfxItemSet& rSrcSet = static_cast<const SvxSetItem*>(pItem)->GetItemSet(); + auto pDestSet = std::make_unique<SfxItemSet>(*rStyleSet.GetPool(),rSrcSet.GetRanges()); + pDestSet->Put(rSrcSet); + rStyleSet.Put(SvxSetItem(ATTR_PAGE_FOOTERSET,std::move(pDestSet))); + } + + pStyle = pStylePool->Next(); + } +} + +void ScDocShell::LoadStyles( SfxObjectShell &rSource ) +{ + m_aDocument.StylesToNames(); + + SfxObjectShell::LoadStyles(rSource); + lcl_AdjustPool( GetStyleSheetPool() ); // adjust SetItems + + m_aDocument.UpdStlShtPtrsFrmNms(); + + UpdateAllRowHeights(); + + // Paint + + PostPaint( 0,0,0, m_aDocument.MaxCol(),m_aDocument.MaxRow(),MAXTAB, PaintPartFlags::Grid | PaintPartFlags::Left ); +} + +void ScDocShell::LoadStylesArgs( ScDocShell& rSource, bool bReplace, bool bCellStyles, bool bPageStyles ) +{ + // similar to LoadStyles, but with selectable behavior for XStyleLoader::loadStylesFromURL call + + if ( !bCellStyles && !bPageStyles ) // nothing to do + return; + + ScStyleSheetPool* pSourcePool = rSource.GetDocument().GetStyleSheetPool(); + ScStyleSheetPool* pDestPool = m_aDocument.GetStyleSheetPool(); + + SfxStyleFamily eFamily = bCellStyles ? + ( bPageStyles ? SfxStyleFamily::All : SfxStyleFamily::Para ) : + SfxStyleFamily::Page; + SfxStyleSheetIterator aIter( pSourcePool, eFamily ); + sal_uInt16 nSourceCount = aIter.Count(); + if ( nSourceCount == 0 ) + return; // no source styles + + std::unique_ptr<ScStylePair[]> pStyles(new ScStylePair[ nSourceCount ]); + sal_uInt16 nFound = 0; + + // first create all new styles + + SfxStyleSheetBase* pSourceStyle = aIter.First(); + while (pSourceStyle) + { + OUString aName = pSourceStyle->GetName(); + SfxStyleSheetBase* pDestStyle = pDestPool->Find( pSourceStyle->GetName(), pSourceStyle->GetFamily() ); + if ( pDestStyle ) + { + // touch existing styles only if replace flag is set + if ( bReplace ) + { + pStyles[nFound].pSource = pSourceStyle; + pStyles[nFound].pDest = pDestStyle; + ++nFound; + } + } + else + { + pStyles[nFound].pSource = pSourceStyle; + pStyles[nFound].pDest = &pDestPool->Make( aName, pSourceStyle->GetFamily(), pSourceStyle->GetMask() ); + ++nFound; + } + + pSourceStyle = aIter.Next(); + } + + // then copy contents (after inserting all styles, for parent etc.) + + for ( sal_uInt16 i = 0; i < nFound; ++i ) + { + pStyles[i].pDest->GetItemSet().PutExtended( + pStyles[i].pSource->GetItemSet(), SfxItemState::DONTCARE, SfxItemState::DEFAULT); + if(pStyles[i].pSource->HasParentSupport()) + pStyles[i].pDest->SetParent(pStyles[i].pSource->GetParent()); + // follow is never used + } + + lcl_AdjustPool( GetStyleSheetPool() ); // adjust SetItems + UpdateAllRowHeights(); + PostPaint( 0,0,0, m_aDocument.MaxCol(),m_aDocument.MaxRow(),MAXTAB, PaintPartFlags::Grid | PaintPartFlags::Left ); // Paint +} + +void ScDocShell::ReconnectDdeLink(SfxObjectShell& rServer) +{ + ::sfx2::LinkManager* pLinkManager = m_aDocument.GetLinkManager(); + if (!pLinkManager) + return; + + pLinkManager->ReconnectDdeLink(rServer); +} + +void ScDocShell::UpdateLinks() +{ + typedef std::unordered_set<OUString> StrSetType; + + sfx2::LinkManager* pLinkManager = m_aDocument.GetLinkManager(); + StrSetType aNames; + + // out with the no longer used links + + size_t nCount = pLinkManager->GetLinks().size(); + for (size_t k=nCount; k>0; ) + { + --k; + ::sfx2::SvBaseLink* pBase = pLinkManager->GetLinks()[k].get(); + if (ScTableLink* pTabLink = dynamic_cast<ScTableLink*>(pBase)) + { + if (pTabLink->IsUsed()) + aNames.insert(pTabLink->GetFileName()); + else // no longer used -> delete + { + pTabLink->SetAddUndo(true); + pLinkManager->Remove(k); + } + } + } + + // enter new links + + SCTAB nTabCount = m_aDocument.GetTableCount(); + for (SCTAB i = 0; i < nTabCount; ++i) + { + if (!m_aDocument.IsLinked(i)) + continue; + + OUString aDocName = m_aDocument.GetLinkDoc(i); + OUString aFltName = m_aDocument.GetLinkFlt(i); + OUString aOptions = m_aDocument.GetLinkOpt(i); + sal_uLong nRefresh = m_aDocument.GetLinkRefreshDelay(i); + bool bThere = false; + for (SCTAB j = 0; j < i && !bThere; ++j) // several times in the document? + { + if (m_aDocument.IsLinked(j) + && m_aDocument.GetLinkDoc(j) == aDocName + && m_aDocument.GetLinkFlt(j) == aFltName + && m_aDocument.GetLinkOpt(j) == aOptions) + // Ignore refresh delay in compare, it should be the + // same for identical links and we don't want dupes + // if it ain't. + bThere = true; + } + + if (!bThere) // already entered as filter? + { + if (!aNames.insert(aDocName).second) + bThere = true; + } + + if (!bThere) + { + ScTableLink* pLink = new ScTableLink( this, aDocName, aFltName, aOptions, nRefresh ); + pLink->SetInCreate(true); + pLinkManager->InsertFileLink(*pLink, sfx2::SvBaseLinkObjectType::ClientFile, aDocName, &aFltName); + pLink->Update(); + pLink->SetInCreate(false); + } + } +} + +void ScDocShell::ReloadTabLinks() +{ + sfx2::LinkManager* pLinkManager = m_aDocument.GetLinkManager(); + + bool bAny = false; + size_t nCount = pLinkManager->GetLinks().size(); + for (size_t i=0; i<nCount; i++ ) + { + ::sfx2::SvBaseLink* pBase = pLinkManager->GetLinks()[i].get(); + if (ScTableLink* pTabLink = dynamic_cast<ScTableLink*>(pBase)) + { +// pTabLink->SetAddUndo(sal_False); //! merge Undos + + // Painting only after Update() makes no sense: + // ScTableLink::Refresh() will post a Paint only is bDoPaint is true + // pTabLink->SetPaint(false); // Paint only once at the end + pTabLink->Update(); + //pTabLink->SetPaint(true); +// pTabLink->SetAddUndo(sal_True); + bAny = true; + } + } + + if ( bAny ) + { + // Paint only once + PostPaint( ScRange(0,0,0,m_aDocument.MaxCol(),m_aDocument.MaxRow(),MAXTAB), + PaintPartFlags::Grid | PaintPartFlags::Top | PaintPartFlags::Left ); + + SetDocumentModified(); + } +} + +void ScDocShell::SetFormulaOptions( const ScFormulaOptions& rOpt, bool bForLoading ) +{ + m_aDocument.SetGrammar( rOpt.GetFormulaSyntax() ); + + // This is nasty because it resets module globals from within a docshell! + // For actual damage caused see fdo#82183 where an unconditional + // ScGlobal::ResetFunctionList() (without checking GetUseEnglishFuncName()) + // lead to a crash because the function list was still used by the Formula + // Wizard when loading the second document. + // Do the stupid stuff only when we're not called while loading a document. + + /* TODO: bForLoading is a workaround, rather get rid of setting any + * globals from per document instances like ScDocShell. */ + + /* XXX this is utter crap, we rely on the options being set here at least + * once, for the very first document, empty or loaded. */ + static bool bInitOnce = true; + + if (!bForLoading || bInitOnce) + { + bool bForceInit = bInitOnce; + bInitOnce = false; + if (bForceInit || rOpt.GetUseEnglishFuncName() != SC_MOD()->GetFormulaOptions().GetUseEnglishFuncName()) + { + // This needs to be called first since it may re-initialize the entire + // opcode map. + if (rOpt.GetUseEnglishFuncName()) + { + // switch native symbols to English. + ScCompiler aComp(nullptr, ScAddress()); + ScCompiler::OpCodeMapPtr xMap = aComp.GetOpCodeMap(css::sheet::FormulaLanguage::ENGLISH); + ScCompiler::SetNativeSymbols(xMap); + } + else + // re-initialize native symbols with localized function names. + ScCompiler::ResetNativeSymbols(); + + // Force re-population of function names for the function wizard, function tip etc. + ScGlobal::ResetFunctionList(); + } + + // Update the separators. + ScCompiler::UpdateSeparatorsNative( + rOpt.GetFormulaSepArg(), rOpt.GetFormulaSepArrayCol(), rOpt.GetFormulaSepArrayRow()); + + // Global interpreter settings. + ScInterpreter::SetGlobalConfig(rOpt.GetCalcConfig()); + } + + // Per document interpreter settings. + m_aDocument.SetCalcConfig( rOpt.GetCalcConfig() ); +} + +void ScDocShell::CheckConfigOptions() +{ + if (IsConfigOptionsChecked()) + // no need to check repeatedly. + return; + + OUString aDecSep = ScGlobal::getLocaleDataPtr()->getNumDecimalSep(); + OUString aDecSepAlt = ScGlobal::getLocaleDataPtr()->getNumDecimalSepAlt(); + + ScModule* pScMod = SC_MOD(); + const ScFormulaOptions& rOpt=pScMod->GetFormulaOptions(); + const OUString& aSepArg = rOpt.GetFormulaSepArg(); + const OUString& aSepArrRow = rOpt.GetFormulaSepArrayRow(); + const OUString& aSepArrCol = rOpt.GetFormulaSepArrayCol(); + + if (aDecSep == aSepArg || aDecSep == aSepArrRow || aDecSep == aSepArrCol || + aDecSepAlt == aSepArg || aDecSepAlt == aSepArrRow || aDecSepAlt == aSepArrCol) + { + // One of arg separators conflicts with the current decimal + // separator. Reset them to default. + ScFormulaOptions aNew = rOpt; + aNew.ResetFormulaSeparators(); + SetFormulaOptions(aNew); + pScMod->SetFormulaOptions(aNew); + + // Launch a nice warning dialog to let the users know of this change. + ScTabViewShell* pViewShell = GetBestViewShell(); + if (pViewShell) + { + vcl::Window* pParent = pViewShell->GetFrameWin(); + std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(pParent ? pParent->GetFrameWeld() : nullptr, + VclMessageType::Info, VclButtonsType::Ok, + ScResId(STR_OPTIONS_WARN_SEPARATORS))); + xInfoBox->run(); + } + + // For now, this is the only option setting that could launch info + // dialog. But in the future we may want to implement a nicer + // dialog to display a list of warnings in case we have several + // pieces of information to display. + } + + SetConfigOptionsChecked(true); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |