diff options
Diffstat (limited to 'sc/source/ui/miscdlgs/filldlg.cxx')
| -rw-r--r-- | sc/source/ui/miscdlgs/filldlg.cxx | 290 |
1 files changed, 290 insertions, 0 deletions
diff --git a/sc/source/ui/miscdlgs/filldlg.cxx b/sc/source/ui/miscdlgs/filldlg.cxx new file mode 100644 index 000000000..f47ee8194 --- /dev/null +++ b/sc/source/ui/miscdlgs/filldlg.cxx @@ -0,0 +1,290 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#undef SC_DLLIMPLEMENTATION + +#include <svl/zforlist.hxx> +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> + +#include <scresid.hxx> +#include <document.hxx> +#include <strings.hrc> +#include <filldlg.hxx> +#include <scui_def.hxx> + + +ScFillSeriesDlg::ScFillSeriesDlg( weld::Window* pParent, + ScDocument& rDocument, + FillDir eFillDir, + FillCmd eFillCmd, + FillDateCmd eFillDateCmd, + const OUString& aStartStr, + double fStep, + double fMax, + const SCSIZE nSelectHeight, + const SCSIZE nSelectWidth, + sal_uInt16 nPossDir ) + : GenericDialogController(pParent, "modules/scalc/ui/filldlg.ui", "FillSeriesDialog") + , aStartStrVal(aStartStr) + , aErrMsgInvalidVal(ScResId(SCSTR_VALERR)) + , rDoc(rDocument) + , theFillDir(eFillDir) + , theFillCmd(eFillCmd) + , theFillDateCmd(eFillDateCmd) + , fIncrement(fStep) + , fEndVal(fMax) + , m_nSelectHeight(nSelectHeight) + , m_nSelectWidth(nSelectWidth) + , m_xFtStartVal(m_xBuilder->weld_label("startL")) + , m_xEdStartVal(m_xBuilder->weld_entry("startValue")) + , m_xFtEndVal(m_xBuilder->weld_label("endL")) + , m_xEdEndVal(m_xBuilder->weld_entry("endValue")) + , m_xFtIncrement(m_xBuilder->weld_label("incrementL")) + , m_xEdIncrement(m_xBuilder->weld_entry("increment")) + , m_xBtnDown(m_xBuilder->weld_radio_button("down")) + , m_xBtnRight(m_xBuilder->weld_radio_button("right")) + , m_xBtnUp(m_xBuilder->weld_radio_button("up")) + , m_xBtnLeft(m_xBuilder->weld_radio_button("left")) + , m_xBtnArithmetic(m_xBuilder->weld_radio_button("linear")) + , m_xBtnGeometric(m_xBuilder->weld_radio_button("growth")) + , m_xBtnDate(m_xBuilder->weld_radio_button("date")) + , m_xBtnAutoFill(m_xBuilder->weld_radio_button("autofill")) + , m_xFtTimeUnit(m_xBuilder->weld_label("tuL")) + , m_xBtnDay(m_xBuilder->weld_radio_button("day")) + , m_xBtnDayOfWeek(m_xBuilder->weld_radio_button("week")) + , m_xBtnMonth(m_xBuilder->weld_radio_button("month")) + , m_xBtnYear(m_xBuilder->weld_radio_button("year")) + , m_xBtnOk(m_xBuilder->weld_button("ok")) +{ + Init(nPossDir); +} + +ScFillSeriesDlg::~ScFillSeriesDlg() +{ +} + +void ScFillSeriesDlg::SetEdStartValEnabled(bool bFlag) +{ + if(bFlag) + { + m_xFtStartVal->set_sensitive(true); + m_xEdStartVal->set_sensitive(true); + } + else + { + m_xFtStartVal->set_sensitive(false); + m_xEdStartVal->set_sensitive(false); + } +} + +void ScFillSeriesDlg::Init( sal_uInt16 nPossDir ) +{ + m_xBtnOk->connect_clicked ( LINK( this, ScFillSeriesDlg, OKHdl ) ); + m_xBtnArithmetic->connect_toggled ( LINK( this, ScFillSeriesDlg, DisableHdl ) ); + m_xBtnGeometric->connect_toggled ( LINK( this, ScFillSeriesDlg, DisableHdl ) ); + m_xBtnDate->connect_toggled ( LINK( this, ScFillSeriesDlg, DisableHdl ) ); + m_xBtnAutoFill->connect_toggled ( LINK( this, ScFillSeriesDlg, DisableHdl ) ); + + if( nPossDir == FDS_OPT_NONE ) + { + m_xBtnLeft->set_sensitive(false); + m_xBtnRight->set_sensitive(false); + m_xBtnDown->set_sensitive(false); + m_xBtnUp->set_sensitive(false); + } + + if( nPossDir == FDS_OPT_HORZ ) + { + m_xBtnDown->set_sensitive(false); + m_xBtnUp->set_sensitive(false); + } + + if( nPossDir == FDS_OPT_VERT ) + { + m_xBtnLeft->set_sensitive(false); + m_xBtnRight->set_sensitive(false); + } + + switch ( theFillDir ) + { + case FILL_TO_LEFT: m_xBtnLeft->set_active(true); break; + case FILL_TO_RIGHT: m_xBtnRight->set_active(true); break; + case FILL_TO_BOTTOM: m_xBtnDown->set_active(true); break; + case FILL_TO_TOP: m_xBtnUp->set_active(true); break; + default: + break; + } + + switch ( theFillCmd ) + { + case FILL_LINEAR: + m_xBtnArithmetic->set_active(true); + DisableHdl(*m_xBtnArithmetic); + break; + case FILL_GROWTH: + m_xBtnGeometric->set_active(true); + DisableHdl(*m_xBtnGeometric ); + break; + case FILL_DATE: + m_xBtnDate->set_active(true); + DisableHdl(*m_xBtnDate); + break; + case FILL_AUTO: + m_xBtnAutoFill->set_active(true); + DisableHdl(*m_xBtnAutoFill); + break; + default: + break; + } + + switch ( theFillDateCmd ) + { + case FILL_DAY: m_xBtnDay->set_active(true); break; + case FILL_WEEKDAY: m_xBtnDayOfWeek->set_active(true); break; + case FILL_MONTH: m_xBtnMonth->set_active(true); break; + case FILL_YEAR: m_xBtnYear->set_active(true); break; + default: + break; + } + + fStartVal = MAXDOUBLE; + + m_xEdStartVal->set_text( aStartStrVal); + + OUString aIncrTxt; + rDoc.GetFormatTable()->GetInputLineString( fIncrement, 0, aIncrTxt ); + m_xEdIncrement->set_text( aIncrTxt ); + + OUString aEndTxt; + if ( fEndVal != MAXDOUBLE ) + rDoc.GetFormatTable()->GetInputLineString( fEndVal, 0, aEndTxt ); + m_xEdEndVal->set_text( aEndTxt ); +} + +weld::Entry* ScFillSeriesDlg::CheckValues() +{ + OUString aStartStr = m_xEdStartVal->get_text(); + OUString aIncStr = m_xEdIncrement->get_text(); + OUString aEndStr = m_xEdEndVal->get_text(); + sal_uInt32 nKey = 0; + + // If entry is filled, capture value before handling special cases. + if ( !aStartStr.isEmpty() + && theFillCmd != FILL_AUTO + && !rDoc.GetFormatTable()->IsNumberFormat( aStartStr, nKey, fStartVal ) ) + return m_xEdStartVal.get(); + if ( !aIncStr.isEmpty() + && !rDoc.GetFormatTable()->IsNumberFormat( aIncStr, nKey, fIncrement ) ) + return m_xEdIncrement.get(); + if ( !aEndStr.isEmpty() + && !rDoc.GetFormatTable()->IsNumberFormat( aEndStr, nKey, fEndVal ) ) + return m_xEdEndVal.get(); + + if ( theFillCmd == FILL_LINEAR && !aEndStr.isEmpty() + && aStartStr.isEmpty() != aIncStr.isEmpty() + && ( ( m_nSelectHeight == 1 ) != ( m_nSelectWidth == 1 ) ) ) + { + SCSIZE nStepAmount = ( theFillDir == FILL_TO_BOTTOM || theFillDir == FILL_TO_TOP ) ? + m_nSelectHeight - 1 : m_nSelectWidth - 1 ; + if ( aStartStr.isEmpty() ) + fStartVal = fEndVal - fIncrement * nStepAmount; + if ( aIncStr.isEmpty() && nStepAmount != 0 ) + fIncrement = (fEndVal - fStartVal) / nStepAmount; + } + else + { + if ( aStartStr.isEmpty() || m_xBtnAutoFill->get_active() ) + fStartVal = MAXDOUBLE; + if ( aIncStr.isEmpty() ) + return m_xEdIncrement.get(); + if ( aEndStr.isEmpty() ) + fEndVal = ( fIncrement < 0 ) ? -MAXDOUBLE : MAXDOUBLE; + } + return nullptr; +} + +// Handler: +IMPL_LINK(ScFillSeriesDlg, DisableHdl, weld::ToggleButton&, rBtn, void) +{ + if (&rBtn == m_xBtnDate.get()) + { + m_xBtnDay->set_sensitive(true); + m_xBtnDayOfWeek->set_sensitive(true); + m_xBtnMonth->set_sensitive(true); + m_xBtnYear->set_sensitive(true); + m_xFtTimeUnit->set_sensitive(true); + } + else + { + m_xBtnDay->set_sensitive(false); + m_xBtnDayOfWeek->set_sensitive(false); + m_xBtnMonth->set_sensitive(false); + m_xBtnYear->set_sensitive(false); + m_xFtTimeUnit->set_sensitive(false); + } + + if (&rBtn != m_xBtnAutoFill.get()) + { + m_xFtIncrement->set_sensitive(true); + m_xEdIncrement->set_sensitive(true); + m_xFtEndVal->set_sensitive(true); + m_xEdEndVal->set_sensitive(true); + } + else + { + m_xFtIncrement->set_sensitive(false); + m_xEdIncrement->set_sensitive(false); + m_xFtEndVal->set_sensitive(false); + m_xEdEndVal->set_sensitive(false); + } +} + +IMPL_LINK_NOARG(ScFillSeriesDlg, OKHdl, weld::Button&, void) +{ + if ( m_xBtnLeft->get_active() ) theFillDir = FILL_TO_LEFT; + else if ( m_xBtnRight->get_active() ) theFillDir = FILL_TO_RIGHT; + else if ( m_xBtnDown->get_active() ) theFillDir = FILL_TO_BOTTOM; + else if ( m_xBtnUp->get_active() ) theFillDir = FILL_TO_TOP; + + if ( m_xBtnArithmetic->get_active() ) theFillCmd = FILL_LINEAR; + else if ( m_xBtnGeometric->get_active() ) theFillCmd = FILL_GROWTH; + else if ( m_xBtnDate->get_active() ) theFillCmd = FILL_DATE; + else if ( m_xBtnAutoFill->get_active() ) theFillCmd = FILL_AUTO; + + if ( m_xBtnDay->get_active() ) theFillDateCmd = FILL_DAY; + else if ( m_xBtnDayOfWeek->get_active() ) theFillDateCmd = FILL_WEEKDAY; + else if ( m_xBtnMonth->get_active() ) theFillDateCmd = FILL_MONTH; + else if ( m_xBtnYear->get_active() ) theFillDateCmd = FILL_YEAR; + + weld::Entry* pEdWrong = CheckValues(); + if ( pEdWrong == nullptr ) + { + m_xDialog->response(RET_OK); + } + else + { + std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(m_xDialog.get(), VclMessageType::Warning, + VclButtonsType::Ok, aErrMsgInvalidVal)); + xBox->run(); + pEdWrong->grab_focus(); + } +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |