diff options
Diffstat (limited to 'sc/source/ui/view/tabvwsh2.cxx')
| -rw-r--r-- | sc/source/ui/view/tabvwsh2.cxx | 457 |
1 files changed, 457 insertions, 0 deletions
diff --git a/sc/source/ui/view/tabvwsh2.cxx b/sc/source/ui/view/tabvwsh2.cxx new file mode 100644 index 000000000..cee19352f --- /dev/null +++ b/sc/source/ui/view/tabvwsh2.cxx @@ -0,0 +1,457 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <comphelper/lok.hxx> +#include <sfx2/bindings.hxx> +#include <sfx2/viewfrm.hxx> +#include <svl/whiter.hxx> +#include <unotools/moduleoptions.hxx> +#include <svl/languageoptions.hxx> +#include <sfx2/dispatch.hxx> + +#include <tabvwsh.hxx> +#include <drawview.hxx> +#include <fupoor.hxx> +#include <fuconrec.hxx> +#include <fuconpol.hxx> +#include <fuconarc.hxx> +#include <fuconuno.hxx> +#include <fusel.hxx> +#include <futext.hxx> +#include <fuinsert.hxx> +#include <sc.hrc> +#include <scmod.hxx> +#include <appoptio.hxx> +#include <gridwin.hxx> + +// Create default drawing objects via keyboard +#include <svx/svdpagv.hxx> +#include <svl/stritem.hxx> +#include <fuconcustomshape.hxx> + +SdrView* ScTabViewShell::GetDrawView() const +{ + return const_cast<ScTabViewShell*>(this)->GetScDrawView(); // GetScDrawView is non-const +} + +void ScTabViewShell::WindowChanged() +{ + vcl::Window* pWin = GetActiveWin(); + + ScDrawView* pDrView = GetScDrawView(); + if (pDrView) + pDrView->SetActualWin(pWin); + + FuPoor* pFunc = GetDrawFuncPtr(); + if (pFunc) + pFunc->SetWindow(pWin); + + // when font from InputContext is used, + // this must be moved to change of cursor position: + UpdateInputContext(); +} + +void ScTabViewShell::ExecDraw(SfxRequest& rReq) +{ + SC_MOD()->InputEnterHandler(); + UpdateInputHandler(); + + MakeDrawLayer(); + + ScTabView* pTabView = GetViewData().GetView(); + SfxBindings& rBindings = GetViewFrame()->GetBindings(); + + vcl::Window* pWin = pTabView->GetActiveWin(); + ScDrawView* pView = pTabView->GetScDrawView(); + SdrModel* pDoc = pView->GetModel(); + + const SfxItemSet *pArgs = rReq.GetArgs(); + sal_uInt16 nNewId = rReq.GetSlot(); + + if ( nNewId == SID_DRAW_CHART ) + { + // #i71254# directly insert a chart instead of drawing its output rectangle + FuInsertChart(*this, pWin, pView, pDoc, rReq, LINK( this, ScTabViewShell, DialogClosedHdl )); + return; + } + + if ( nNewId == SID_DRAW_SELECT ) + nNewId = SID_OBJECT_SELECT; + + sal_uInt16 nNewFormId = 0; + if ( nNewId == SID_FM_CREATE_CONTROL && pArgs ) + { + const SfxPoolItem* pItem; + if ( pArgs->GetItemState( SID_FM_CONTROL_IDENTIFIER, true, &pItem ) == SfxItemState::SET && + dynamic_cast<const SfxUInt16Item*>( pItem) != nullptr ) + nNewFormId = static_cast<const SfxUInt16Item*>(pItem)->GetValue(); + } + + OUString sStringItemValue; + if ( pArgs ) + { + const SfxPoolItem* pItem; + if ( pArgs->GetItemState( nNewId, true, &pItem ) == SfxItemState::SET && dynamic_cast<const SfxStringItem*>( pItem) != nullptr ) + sStringItemValue = static_cast<const SfxStringItem*>(pItem)->GetValue(); + } + bool bSwitchCustom = ( !sStringItemValue.isEmpty() && !sDrawCustom.isEmpty() && sStringItemValue != sDrawCustom ); + + if (nNewId == SID_INSERT_FRAME) // from Tbx button + nNewId = SID_DRAW_TEXT; + + // CTRL-SID_OBJECT_SELECT is used to select the first object, + // but not if SID_OBJECT_SELECT is the result of clicking a create function again, + // so this must be tested before changing nNewId below. + bool bSelectFirst = ( nNewId == SID_OBJECT_SELECT && (rReq.GetModifier() & KEY_MOD1) ); + + bool bEx = IsDrawSelMode(); + if ( rReq.GetModifier() & KEY_MOD1 ) + { + // always allow keyboard selection also on background layer + // also allow creation of default objects if the same object type + // was already active + bEx = true; + } + else if ( nNewId == nDrawSfxId && ( nNewId != SID_FM_CREATE_CONTROL || + nNewFormId == nFormSfxId || nNewFormId == 0 ) && !bSwitchCustom ) + { + // #i52871# if a different custom shape is selected, the slot id can be the same, + // so the custom shape type string has to be compared, too. + + // SID_FM_CREATE_CONTROL with nNewFormId==0 (without parameter) comes + // from FuConstruct::SimpleMouseButtonUp when deactivating + // Execute for the form shell, to deselect the controller + if ( nNewId == SID_FM_CREATE_CONTROL ) + { + GetViewData().GetDispatcher().Execute(SID_FM_LEAVE_CREATE); + GetViewFrame()->GetBindings().InvalidateAll(false); + //! what kind of slot does the weird controller really need to display this???? + } + + bEx = !bEx; + nNewId = SID_OBJECT_SELECT; + } + else + bEx = true; + + if ( nDrawSfxId == SID_FM_CREATE_CONTROL && nNewId != nDrawSfxId ) + { + // switching from control- to paint function -> deselect in control-controller + GetViewData().GetDispatcher().Execute(SID_FM_LEAVE_CREATE); + GetViewFrame()->GetBindings().InvalidateAll(false); + //! what kind of slot does the weird controller really need to display this???? + } + + SetDrawSelMode(bEx); + + pView->LockBackgroundLayer( !bEx ); + + if ( bSelectFirst ) + { + // select first draw object if none is selected yet + if(!pView->AreObjectsMarked()) + { + // select first object + pView->UnmarkAllObj(); + pView->MarkNextObj(true); + + // ...and make it visible + if(pView->AreObjectsMarked()) + pView->MakeVisible(pView->GetAllMarkedRect(), *pWin); + } + } + + nDrawSfxId = nNewId; + sDrawCustom.clear(); // value is set below for custom shapes + + if (nNewId == SID_DRAW_TEXT || nNewId == SID_DRAW_TEXT_VERTICAL + || nNewId == SID_DRAW_TEXT_MARQUEE || nNewId == SID_DRAW_NOTEEDIT) + SetDrawTextShell(true); + else + { + if (bEx || pView->GetMarkedObjectList().GetMarkCount() != 0) + SetDrawShellOrSub(); + else + SetDrawShell(false); + } + + if (pTabView->GetDrawFuncPtr()) + { + if (pTabView->GetDrawFuncOldPtr() != pTabView->GetDrawFuncPtr()) + delete pTabView->GetDrawFuncOldPtr(); + + pTabView->GetDrawFuncPtr()->Deactivate(); + pTabView->SetDrawFuncOldPtr(pTabView->GetDrawFuncPtr()); + pTabView->SetDrawFuncPtr(nullptr); + } + + SfxRequest aNewReq(rReq); + aNewReq.SetSlot(nDrawSfxId); + + assert(nNewId != SID_DRAW_CHART); //#i71254# handled already above + + // for LibreOfficeKit - choosing a shape should construct it directly + bool bCreateDirectly = false; + + switch (nNewId) + { + case SID_OBJECT_SELECT: + // not always switch back + if(pView->GetMarkedObjectList().GetMarkCount() == 0) SetDrawShell(bEx); + pTabView->SetDrawFuncPtr(new FuSelection(*this, pWin, pView, pDoc, aNewReq)); + break; + + case SID_DRAW_LINE: + case SID_DRAW_XLINE: + case SID_LINE_ARROW_END: + case SID_LINE_ARROW_CIRCLE: + case SID_LINE_ARROW_SQUARE: + case SID_LINE_ARROW_START: + case SID_LINE_CIRCLE_ARROW: + case SID_LINE_SQUARE_ARROW: + case SID_LINE_ARROWS: + case SID_DRAW_RECT: + case SID_DRAW_ELLIPSE: + case SID_DRAW_MEASURELINE: + pTabView->SetDrawFuncPtr(new FuConstRectangle(*this, pWin, pView, pDoc, aNewReq)); + break; + + case SID_DRAW_CAPTION: + case SID_DRAW_CAPTION_VERTICAL: + pTabView->SetDrawFuncPtr(new FuConstRectangle(*this, pWin, pView, pDoc, aNewReq)); + pView->SetFrameDragSingles( false ); + rBindings.Invalidate( SID_BEZIER_EDIT ); + break; + + case SID_DRAW_XPOLYGON: + case SID_DRAW_XPOLYGON_NOFILL: + case SID_DRAW_POLYGON: + case SID_DRAW_POLYGON_NOFILL: + case SID_DRAW_BEZIER_NOFILL: + case SID_DRAW_BEZIER_FILL: + case SID_DRAW_FREELINE: + case SID_DRAW_FREELINE_NOFILL: + pTabView->SetDrawFuncPtr(new FuConstPolygon(*this, pWin, pView, pDoc, aNewReq)); + break; + + case SID_DRAW_ARC: + case SID_DRAW_PIE: + case SID_DRAW_CIRCLECUT: + pTabView->SetDrawFuncPtr(new FuConstArc(*this, pWin, pView, pDoc, aNewReq)); + break; + + case SID_DRAW_TEXT: + case SID_DRAW_TEXT_VERTICAL: + case SID_DRAW_TEXT_MARQUEE: + case SID_DRAW_NOTEEDIT: + pTabView->SetDrawFuncPtr(new FuText(*this, pWin, pView, pDoc, aNewReq)); + break; + + case SID_FM_CREATE_CONTROL: + SetDrawFormShell(true); + pTabView->SetDrawFuncPtr(new FuConstUnoControl(*this, pWin, pView, pDoc, aNewReq)); + nFormSfxId = nNewFormId; + break; + + case SID_DRAWTBX_CS_BASIC : + case SID_DRAWTBX_CS_SYMBOL : + case SID_DRAWTBX_CS_ARROW : + case SID_DRAWTBX_CS_FLOWCHART : + case SID_DRAWTBX_CS_CALLOUT : + case SID_DRAWTBX_CS_STAR : + case SID_DRAW_CS_ID : + { + pTabView->SetDrawFuncPtr(new FuConstCustomShape(*this, pWin, pView, pDoc, aNewReq)); + + bCreateDirectly = comphelper::LibreOfficeKit::isActive(); + + if ( nNewId != SID_DRAW_CS_ID ) + { + const SfxStringItem* pEnumCommand = rReq.GetArg<SfxStringItem>(nNewId); + if ( pEnumCommand ) + { + SfxBindings& rBind = GetViewFrame()->GetBindings(); + rBind.Invalidate( nNewId ); + rBind.Update( nNewId ); + + sDrawCustom = pEnumCommand->GetValue(); // to detect when a different shape type is selected + } + } + } + break; + + default: + break; + } + + if (pTabView->GetDrawFuncPtr()) + pTabView->GetDrawFuncPtr()->Activate(); + + rReq.Done(); + + Invalidate(); + + // Create default drawing objects via keyboard + // with qualifier construct directly + FuPoor* pFuActual = GetDrawFuncPtr(); + + if(pFuActual && ((rReq.GetModifier() & KEY_MOD1) || bCreateDirectly)) + { + // Create default drawing objects via keyboard + const ScAppOptions& rAppOpt = SC_MOD()->GetAppOptions(); + sal_uInt32 nDefaultObjectSizeWidth = rAppOpt.GetDefaultObjectSizeWidth(); + sal_uInt32 nDefaultObjectSizeHeight = rAppOpt.GetDefaultObjectSizeHeight(); + + // calc position and size + bool bLOKIsActive = comphelper::LibreOfficeKit::isActive(); + Point aInsertPos; + if(!bLOKIsActive) + { + tools::Rectangle aVisArea = pWin->PixelToLogic(tools::Rectangle(Point(0,0), pWin->GetOutputSizePixel())); + aInsertPos = aVisArea.Center(); + aInsertPos.AdjustX( -sal_Int32(nDefaultObjectSizeWidth / 2) ); + aInsertPos.AdjustY( -sal_Int32(nDefaultObjectSizeHeight / 2) ); + } + else + { + aInsertPos = GetViewData().getLOKVisibleArea().Center(); + + aInsertPos.setX(sc::TwipsToHMM(aInsertPos.X())); + aInsertPos.setY(sc::TwipsToHMM(aInsertPos.Y())); + + aInsertPos.AdjustX( -sal_Int32(nDefaultObjectSizeWidth / 2) ); + aInsertPos.AdjustY( -sal_Int32(nDefaultObjectSizeHeight / 2) ); + } + + tools::Rectangle aNewObjectRectangle(aInsertPos, Size(nDefaultObjectSizeWidth, nDefaultObjectSizeHeight)); + + ScDrawView* pDrView = GetScDrawView(); + + if(pDrView) + { + SdrPageView* pPageView = pDrView->GetSdrPageView(); + + if(pPageView) + { + // create the default object + SdrObjectUniquePtr pObj = pFuActual->CreateDefaultObject(nNewId, aNewObjectRectangle); + + if(pObj) + { + // insert into page + pView->InsertObjectAtView(pObj.release(), *pPageView); + + if ( nNewId == SID_DRAW_CAPTION || nNewId == SID_DRAW_CAPTION_VERTICAL ) + { + // use KeyInput to start edit mode (FuText is created). + // For FuText objects, edit mode is handled within CreateDefaultObject. + // KEY_F2 is handled in FuDraw::KeyInput. + + pFuActual->KeyInput( KeyEvent( 0, vcl::KeyCode( KEY_F2 ) ) ); + } + } + } + } + } +} + +void ScTabViewShell::GetDrawState(SfxItemSet &rSet) +{ + SfxWhichIter aIter(rSet); + sal_uInt16 nWhich = aIter.FirstWhich(); + + while ( nWhich ) + { + switch ( nWhich ) + { + case SID_DRAW_CHART: + { + bool bOle = GetViewFrame()->GetFrame().IsInPlace(); + if ( bOle || !SvtModuleOptions().IsChart() ) + rSet.DisableItem( nWhich ); + } + break; + + case SID_DRAW_LINE: + case SID_DRAW_XLINE: + case SID_LINE_ARROW_END: + case SID_LINE_ARROW_CIRCLE: + case SID_LINE_ARROW_SQUARE: + case SID_LINE_ARROW_START: + case SID_LINE_CIRCLE_ARROW: + case SID_LINE_SQUARE_ARROW: + case SID_LINE_ARROWS: + case SID_DRAW_MEASURELINE: + case SID_DRAW_RECT: + case SID_DRAW_ELLIPSE: + case SID_DRAW_POLYGON: + case SID_DRAW_POLYGON_NOFILL: + case SID_DRAW_XPOLYGON: + case SID_DRAW_XPOLYGON_NOFILL: + case SID_DRAW_BEZIER_FILL: + case SID_DRAW_BEZIER_NOFILL: + case SID_DRAW_FREELINE: + case SID_DRAW_FREELINE_NOFILL: + case SID_DRAW_ARC: + case SID_DRAW_PIE: + case SID_DRAW_CIRCLECUT: + case SID_DRAW_TEXT: + case SID_DRAW_TEXT_MARQUEE: + case SID_DRAW_CAPTION: + rSet.Put( SfxBoolItem( nWhich, nDrawSfxId == nWhich ) ); + break; + + case SID_DRAW_TEXT_VERTICAL: + case SID_DRAW_CAPTION_VERTICAL: + if ( !SvtLanguageOptions().IsVerticalTextEnabled() ) + rSet.DisableItem( nWhich ); + else + rSet.Put( SfxBoolItem( nWhich, nDrawSfxId == nWhich ) ); + break; + + case SID_OBJECT_SELECT: // important for the old control-controller + rSet.Put( SfxBoolItem( nWhich, nDrawSfxId == SID_OBJECT_SELECT && IsDrawSelMode() ) ); + break; + + case SID_DRAWTBX_CS_BASIC: + case SID_DRAWTBX_CS_SYMBOL: + case SID_DRAWTBX_CS_ARROW: + case SID_DRAWTBX_CS_FLOWCHART: + case SID_DRAWTBX_CS_CALLOUT: + case SID_DRAWTBX_CS_STAR: + rSet.Put( SfxStringItem( nWhich, nDrawSfxId == nWhich ? sDrawCustom : OUString() ) ); + break; + } + nWhich = aIter.NextWhich(); + } +} + +bool ScTabViewShell::SelectObject( const OUString& rName ) +{ + ScDrawView* pView = GetViewData().GetScDrawView(); + if (!pView) + return false; + + bool bFound = pView->SelectObject( rName ); + // DrawShell etc. is handled in MarkListHasChanged + + return bFound; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |