summaryrefslogtreecommitdiffstats
path: root/setup_native/scripts
diff options
context:
space:
mode:
Diffstat (limited to 'setup_native/scripts')
-rw-r--r--setup_native/scripts/admin.pl1244
-rw-r--r--setup_native/scripts/downloadscript.sh104
-rw-r--r--setup_native/scripts/fake-db.spec57
-rw-r--r--setup_native/scripts/install_create.pl60
-rw-r--r--setup_native/scripts/install_linux.sh313
-rw-r--r--setup_native/scripts/langpackscript.sh170
-rw-r--r--setup_native/scripts/mac_install.script27
-rw-r--r--setup_native/scripts/osx_install_languagepack.applescript175
-rw-r--r--setup_native/scripts/uninstall_linux.sh72
-rw-r--r--setup_native/scripts/unpack_update.sh50
10 files changed, 2272 insertions, 0 deletions
diff --git a/setup_native/scripts/admin.pl b/setup_native/scripts/admin.pl
new file mode 100644
index 000000000..714da400c
--- /dev/null
+++ b/setup_native/scripts/admin.pl
@@ -0,0 +1,1244 @@
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+use Cwd;
+use File::Copy;
+use File::Temp qw/ :mktemp /;
+
+#################################################################################
+# Global settings
+#################################################################################
+
+BEGIN
+{
+ $prog = "msi installer";
+ $targetdir = "";
+ $databasepath = "";
+ $starttime = "";
+ $globaltempdirname = "ooopackagingXXXXXX";
+ $savetemppath = "";
+ $msiinfo_available = 0;
+ $path_displayed = 0;
+ $localmsidbpath = "";
+
+ $plat = $^O;
+
+ if ( $plat =~ /cygwin/i )
+ {
+ $separator = "/";
+ $pathseparator = "\:";
+ }
+ else
+ {
+ $separator = "\\";
+ $pathseparator = "\;";
+ }
+}
+
+#################################################################################
+# Program information
+#################################################################################
+
+sub usage
+{
+ print <<End;
+----------------------------------------------------------------------
+This program installs a Windows Installer installation set
+without using msiexec.exe. The installation is comparable
+with an administrative installation using the Windows Installer
+service.
+Required parameter:
+-d Path to installation set or msi database
+-t Target directory
+---------------------------------------------------------------------
+End
+ exit(-1);
+}
+
+#################################################################################
+# Collecting parameter
+#################################################################################
+
+sub getparameter
+{
+ if (( $#ARGV < 3 ) || ( $#ARGV > 3 )) { usage(); }
+
+ while ( $#ARGV >= 0 )
+ {
+ my $param = shift(@ARGV);
+
+ if ($param eq "-t") { $targetdir = shift(@ARGV); }
+ elsif ($param eq "-d") { $databasepath = shift(@ARGV); }
+ else
+ {
+ print "\n**********************************************\n";
+ print "Error: Unknown parameter: $param";
+ print "\n**********************************************\n";
+ usage();
+ exit(-1);
+ }
+ }
+}
+
+#################################################################################
+# Checking content of parameter
+#################################################################################
+
+sub controlparameter
+{
+ if ( $targetdir eq "" )
+ {
+ print "\n******************************************************\n";
+ print "Error: Target directory not defined (parameter -t)!";
+ print "\n******************************************************\n";
+ usage();
+ exit(-1);
+ }
+
+ if ( $databasepath eq "" )
+ {
+ print "\n******************************************************\n";
+ print "Error: Path to msi database not defined (parameter -d)!";
+ print "\n******************************************************\n";
+ usage();
+ exit(-1);
+ }
+
+ if ( -d $databasepath )
+ {
+ $databasepath =~ s/\\\s*$//;
+ $databasepath =~ s/\/\s*$//;
+
+ my $msifiles = find_file_with_file_extension("msi", $databasepath);
+
+ if ( $#{$msifiles} < 0 ) { exit_program("ERROR: Did not find msi database in directory $installationdir"); }
+ if ( $#{$msifiles} > 0 ) { exit_program("ERROR: Did find more than one msi database in directory $installationdir"); }
+
+ $databasepath = $databasepath . $separator . ${$msifiles}[0];
+ }
+
+ if ( ! -f $databasepath ) { exit_program("ERROR: Did not find msi database in directory $databasepath."); }
+
+ if ( ! -d $targetdir ) { create_directories($targetdir); }
+}
+
+#############################################################################
+# The program msidb.exe can be located next to the Perl program. Then it is
+# not necessary to find it in the PATH variable.
+#############################################################################
+
+sub check_local_msidb
+{
+ my $msidbname = "msidb.exe";
+ my $perlprogramm = $0;
+ my $path = $perlprogramm;
+
+ get_path_from_fullqualifiedname(\$path);
+
+ $path =~ s/\\\s*$//;
+ $path =~ s/\/\s*$//;
+
+ my $msidbpath = "";
+ if ( $path =~ /^\s*$/ ) { $msidbpath = $msidbname; }
+ else { $msidbpath = $path . $separator . $msidbname; }
+
+ if ( -f $msidbpath )
+ {
+ $localmsidbpath = $msidbpath;
+ print "Using $msidbpath (next to \"admin.pl\")\n";
+ }
+}
+
+#############################################################################
+# Converting a string list with separator $listseparator
+# into an array
+#############################################################################
+
+sub convert_stringlist_into_array
+{
+ my ( $includestringref, $listseparator ) = @_;
+
+ my @newarray = ();
+ my $first;
+ my $last = ${$includestringref};
+
+ while ( $last =~ /^\s*(.+?)\Q$listseparator\E(.+)\s*$/) # "$" for minimal matching
+ {
+ $first = $1;
+ $last = $2;
+ # Problem with two directly following listseparators. For example a path with two ";;" directly behind each other
+ $first =~ s/^$listseparator//;
+ push(@newarray, "$first\n");
+ }
+
+ push(@newarray, "$last\n");
+
+ return \@newarray;
+}
+
+#########################################################
+# Checking the local system
+# Checking existence of needed files in include path
+#########################################################
+
+sub check_system_path
+{
+ my $onefile;
+ my $error = 0;
+ my $pathvariable = $ENV{'PATH'};
+ my $local_pathseparator = $pathseparator;
+
+ if( $^O =~ /cygwin/i )
+ { # When using cygwin's perl the PATH variable is POSIX style and ...
+ $pathvariable = qx{cygpath -mp "$pathvariable"} ;
+ # has to be converted to DOS style for further use.
+ $local_pathseparator = ';';
+ }
+ my $patharrayref = convert_stringlist_into_array(\$pathvariable, $local_pathseparator);
+
+ my @needed_files_in_path = ("expand.exe");
+ if ( $localmsidbpath eq "" ) { push(@needed_files_in_path, "msidb.exe"); } # not found locally -> search in path
+ my @optional_files_in_path = ("msiinfo.exe");
+
+ print("\nChecking required files:\n");
+
+ foreach $onefile ( @needed_files_in_path )
+ {
+ print("... searching $onefile ...");
+
+ my $fileref = get_sourcepath_from_filename_and_includepath(\$onefile, $patharrayref);
+
+ if ( $$fileref eq "" )
+ {
+ $error = 1;
+ print( "$onefile not found\n" );
+ }
+ else
+ {
+ print( "\tFound: $$fileref\n" );
+ }
+ }
+
+ if ( $error ) { exit_program("ERROR: Could not find all needed files in path (using setsolar should help)!"); }
+
+ print("\nChecking optional files:\n");
+
+ foreach $onefile ( @optional_files_in_path )
+ {
+ print("... searching $onefile ...");
+
+ my $fileref = get_sourcepath_from_filename_and_includepath(\$onefile, $patharrayref);
+
+ if ( $$fileref eq "" )
+ {
+ print( "$onefile not found\n" );
+ if ( $onefile eq "msiinfo.exe" ) { $msiinfo_available = 0; }
+ }
+ else
+ {
+ print( "\tFound: $$fileref\n" );
+ if ( $onefile eq "msiinfo.exe" ) { $msiinfo_available = 1; }
+ }
+ }
+
+}
+
+##########################################################################
+# Searching a file in a list of paths
+##########################################################################
+
+sub get_sourcepath_from_filename_and_includepath
+{
+ my ($searchfilenameref, $includepatharrayref) = @_;
+
+ my $onefile = "";
+ my $foundsourcefile = 0;
+
+ for ( my $j = 0; $j <= $#{$includepatharrayref}; $j++ )
+ {
+ my $includepath = ${$includepatharrayref}[$j];
+ $includepath =~ s/^\s*//;
+ $includepath =~ s/\s*$//;
+
+ $onefile = $includepath . $separator . $$searchfilenameref;
+
+ if ( -f $onefile )
+ {
+ $foundsourcefile = 1;
+ last;
+ }
+ }
+
+ if (!($foundsourcefile)) { $onefile = ""; }
+
+ return \$onefile;
+}
+
+########################################################
+# Finding all files with a specified file extension
+# in a specified directory.
+########################################################
+
+sub find_file_with_file_extension
+{
+ my ($extension, $dir) = @_;
+
+ my @allfiles = ();
+ my @sourcefiles = ();
+
+ $dir =~ s/\Q$separator\E\s*$//;
+
+ opendir(DIR, $dir);
+ @sourcefiles = readdir(DIR);
+ closedir(DIR);
+
+ my $onefile;
+
+ foreach $onefile (@sourcefiles)
+ {
+ if ((!($onefile eq ".")) && (!($onefile eq "..")))
+ {
+ if ( $onefile =~ /^\s*(\S.*?)\.$extension\s*$/ )
+ {
+ push(@allfiles, $onefile)
+ }
+ }
+ }
+
+ return \@allfiles;
+}
+
+##############################################################
+# Creating a directory with all parent directories
+##############################################################
+
+sub create_directories
+{
+ my ($directory) = @_;
+
+ if ( ! try_to_create_directory($directory) )
+ {
+ my $parentdir = $directory;
+ get_path_from_fullqualifiedname(\$parentdir);
+ create_directories($parentdir); # recursive
+ }
+
+ create_directory($directory); # now it has to succeed
+}
+
+##############################################################
+# Creating one directory
+##############################################################
+
+sub create_directory
+{
+ my ($directory) = @_;
+
+ if ( ! -d $directory ) { mkdir($directory, 0775); }
+}
+
+##############################################################
+# Trying to create a directory, no error if this fails
+##############################################################
+
+sub try_to_create_directory
+{
+ my ($directory) = @_;
+
+ my $returnvalue = 1;
+ my $created_directory = 0;
+
+ if (!(-d $directory))
+ {
+ $returnvalue = mkdir($directory, 0775);
+
+ if ($returnvalue)
+ {
+ $created_directory = 1;
+
+ my $localcall = "chmod 775 $directory \>\/dev\/null 2\>\&1";
+ system($localcall);
+ }
+ else
+ {
+ $created_directory = 0;
+ }
+ }
+ else
+ {
+ $created_directory = 1;
+ }
+
+ return $created_directory;
+}
+
+###########################################
+# Getting path from full file name
+###########################################
+
+sub get_path_from_fullqualifiedname
+{
+ my ($longfilenameref) = @_;
+
+ if ( $$longfilenameref =~ /\Q$separator\E/ ) # Is there a separator in the path? Otherwise the path is empty.
+ {
+ if ( $$longfilenameref =~ /^\s*(\S.*\Q$separator\E)(\S.+\S?)/ )
+ {
+ $$longfilenameref = $1;
+ }
+ }
+ else
+ {
+ $$longfilenameref = ""; # there is no path
+ }
+}
+
+##############################################################
+# Getting file name from full file name
+##############################################################
+
+sub make_absolute_filename_to_relative_filename
+{
+ my ($longfilenameref) = @_;
+
+ # Either '/' or '\'.
+ if ( $$longfilenameref =~ /^.*[\/\\](\S.+\S?)/ )
+ {
+ $$longfilenameref = $1;
+ }
+}
+
+############################################
+# Exiting the program with an error
+# This function is used instead of "die"
+############################################
+
+sub exit_program
+{
+ my ($message) = @_;
+
+ print "\n***************************************************************\n";
+ print "$message\n";
+ print "***************************************************************\n";
+ remove_complete_directory($savetemppath, 1);
+ print "\n" . get_time_string();
+ exit(-1);
+}
+
+#################################################################################
+# Unpacking cabinet files with expand
+#################################################################################
+
+sub unpack_cabinet_file
+{
+ my ($cabfilename, $unpackdir) = @_;
+
+ my $expandfile = "expand.exe"; # has to be in the PATH
+
+ # expand.exe has to be located in the system directory.
+ # Cygwin has another tool expand.exe, that converts tabs to spaces. This cannot be used of course.
+ # But this wrong expand.exe is typically in the PATH before this expand.exe, to unpack
+ # cabinet files.
+
+ if ( $^O =~ /cygwin/i )
+ {
+ $expandfile = $ENV{'SYSTEMROOT'} . "/system32/expand.exe"; # Has to be located in the systemdirectory
+ $expandfile =~ s/\\/\//;
+ if ( ! -f $expandfile ) { exit_program("ERROR: Did not find file $expandfile in the Windows system folder!"); }
+ }
+
+ my $expandlogfile = $unpackdir . $separator . "expand.log";
+
+ # exclude cabinet file
+ # my $systemcall = $cabarc . " -o X " . $mergemodulehash->{'cabinetfile'};
+
+ my $systemcall = "";
+ if ( $^O =~ /cygwin/i ) {
+ my $localunpackdir = qx{cygpath -w "$unpackdir"};
+ $localunpackdir =~ s/\\/\\\\/g;
+
+ my $localcabfilename = qx{cygpath -w "$cabfilename"};
+ $localcabfilename =~ s/\\/\\\\/g;
+ $localcabfilename =~ s/\s*$//g;
+
+ $systemcall = $expandfile . " " . $localcabfilename . " -F:\* " . $localunpackdir . " \>\/dev\/null 2\>\&1";
+ }
+ else
+ {
+ $systemcall = $expandfile . " " . $cabfilename . " -F:\* " . $unpackdir . " \> " . $expandlogfile;
+ }
+
+ my $returnvalue = system($systemcall);
+
+ if ($returnvalue) { exit_program("ERROR: Could not execute $systemcall !"); }
+}
+
+#################################################################################
+# Extracting tables from msi database
+#################################################################################
+
+sub extract_tables_from_database
+{
+ my ($fullmsidatabasepath, $workdir, $tablelist) = @_;
+
+ my $msidb = "msidb.exe"; # Has to be in the path
+ if ( $localmsidbpath ) { $msidb = $localmsidbpath; }
+ my $infoline = "";
+ my $systemcall = "";
+ my $returnvalue = "";
+
+ if ( $^O =~ /cygwin/i ) {
+ chomp( $fullmsidatabasepath = qx{cygpath -w "$fullmsidatabasepath"} );
+ # msidb.exe really wants backslashes. (And double escaping because system() expands the string.)
+ $fullmsidatabasepath =~ s/\\/\\\\/g;
+ $workdir =~ s/\\/\\\\/g;
+ # and if there are still slashes, they also need to be double backslash
+ $fullmsidatabasepath =~ s/\//\\\\/g;
+ $workdir =~ s/\//\\\\/g;
+ }
+
+ # Export of all tables by using "*"
+
+ $systemcall = $msidb . " -d " . $fullmsidatabasepath . " -f " . $workdir . " -e $tablelist";
+ print "\nAnalyzing msi database\n";
+ $returnvalue = system($systemcall);
+
+ if ($returnvalue)
+ {
+ $infoline = "ERROR: Could not execute $systemcall !\n";
+ exit_program($infoline);
+ }
+}
+
+########################################################
+# Check, if this installation set contains
+# internal cabinet files included into the msi
+# database.
+########################################################
+
+sub check_for_internal_cabfiles
+{
+ my ($cabfilehash) = @_;
+
+ my $contains_internal_cabfiles = 0;
+ my %allcabfileshash = ();
+
+ foreach my $filename ( keys %{$cabfilehash} )
+ {
+ if ( $filename =~ /^\s*\#/ ) # starting with a hash
+ {
+ $contains_internal_cabfiles = 1;
+ # setting real filename without hash as key and name with hash as value
+ my $realfilename = $filename;
+ $realfilename =~ s/^\s*\#//;
+ $allcabfileshash{$realfilename} = $filename;
+ }
+ }
+
+ return ( $contains_internal_cabfiles, \%allcabfileshash );
+}
+
+#################################################################
+# Exclude all cab files from the msi database.
+#################################################################
+
+sub extract_cabs_from_database
+{
+ my ($msidatabase, $allcabfiles) = @_;
+
+ my $infoline = "";
+ my $fullsuccess = 1;
+ my $msidb = "msidb.exe"; # Has to be in the path
+ if ( $localmsidbpath ) { $msidb = $localmsidbpath; }
+
+ my @all_excluded_cabfiles = ();
+
+ if( $^O =~ /cygwin/i )
+ {
+ $msidatabase = qx{cygpath -w "$msidatabase"};
+ $msidatabase =~ s/\\/\\\\/g;
+ $msidatabase =~ s/\s*$//g;
+ }
+ else
+ {
+ # msidb.exe really wants backslashes. (And double escaping because system() expands the string.)
+ $msidatabase =~ s/\//\\\\/g;
+ }
+
+ foreach my $onefile ( keys %{$allcabfiles} )
+ {
+ my $systemcall = $msidb . " -d " . $msidatabase . " -x " . $onefile;
+ system($systemcall);
+ push(@all_excluded_cabfiles, $onefile);
+ }
+
+ \@all_excluded_cabfiles;
+}
+
+################################################################################
+# Collect all DiskIds to the corresponding cabinet files from Media.idt.
+################################################################################
+
+sub analyze_media_file
+{
+ my ($filecontent) = @_;
+
+ my %diskidhash = ();
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if ( $i < 3 ) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $diskid = $1;
+ my $cabfile = $4;
+
+ $diskidhash{$cabfile} = $diskid;
+ }
+ }
+
+ return \%diskidhash;
+}
+
+################################################################################
+# Analyzing the content of Directory.idt
+#################################################################################
+
+sub analyze_directory_file
+{
+ my ($filecontent) = @_;
+
+ my %table = ();
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $dir = $1;
+ my $parent = $2;
+ my $name = $3;
+
+ if ( $name =~ /^\s*(.*?)\s*\:\s*(.*?)\s*$/ ) { $name = $2; }
+ if ( $name =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $name = $2; }
+
+ my %helphash = ();
+ $helphash{'Directory_Parent'} = $parent;
+ $helphash{'DefaultDir'} = $name;
+ $table{$dir} = \%helphash;
+ }
+ }
+
+ return \%table;
+}
+
+#################################################################################
+# Analyzing the content of Component.idt
+#################################################################################
+
+sub analyze_component_file
+{
+ my ($filecontent) = @_;
+
+ my %table = ();
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $component = $1;
+ my $dir = $3;
+
+ $table{$component} = $dir;
+ }
+ }
+
+ return \%table;
+}
+
+#################################################################################
+# Analyzing the content of File.idt
+#################################################################################
+
+sub analyze_file_file
+{
+ my ($filecontent) = @_;
+
+ my %table = ();
+ my %fileorder = ();
+ my $maxsequence = 0;
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $file = $1;
+ my $comp = $2;
+ my $filename = $3;
+ my $sequence = $8;
+
+ if ( $filename =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $filename = $2; }
+
+ my %helphash = ();
+ $helphash{'Component'} = $comp;
+ $helphash{'FileName'} = $filename;
+ $helphash{'Sequence'} = $sequence;
+
+ $table{$file} = \%helphash;
+
+ $fileorder{$sequence} = $file;
+
+ if ( $sequence > $maxsequence ) { $maxsequence = $sequence; }
+ }
+ }
+
+ return (\%table, \%fileorder, $maxsequence);
+}
+
+####################################################################################
+# Recursively creating the directory tree
+####################################################################################
+
+sub create_directory_tree
+{
+ my ($parent, $pathcollector, $fulldir, $dirhash) = @_;
+
+ foreach my $dir ( keys %{$dirhash} )
+ {
+ if (( $dirhash->{$dir}->{'Directory_Parent'} eq $parent ) && ( $dirhash->{$dir}->{'DefaultDir'} ne "." ))
+ {
+ my $dirname = $dirhash->{$dir}->{'DefaultDir'};
+ # Create the directory
+ my $newdir = $fulldir . $separator . $dirname;
+ if ( ! -f $newdir ) { mkdir $newdir; }
+ # Saving in collector
+ $pathcollector->{$dir} = $newdir;
+ # Iteration
+ create_directory_tree($dir, $pathcollector, $newdir, $dirhash);
+ }
+ }
+}
+
+####################################################################################
+# Creating the directory tree
+####################################################################################
+
+sub create_directory_structure
+{
+ my ($dirhash, $targetdir) = @_;
+
+ print "Creating directories\n";
+
+ my %fullpathhash = ();
+
+ my @startparents = ("TARGETDIR", "INSTALLLOCATION");
+
+ foreach $dir (@startparents) { create_directory_tree($dir, \%fullpathhash, $targetdir, $dirhash); }
+
+ # Also adding the paths of the startparents
+ foreach $dir (@startparents)
+ {
+ if ( ! exists($fullpathhash{$dir}) ) { $fullpathhash{$dir} = $targetdir; }
+ }
+
+ return \%fullpathhash;
+}
+
+####################################################################################
+# Cygwin: Setting privileges for files
+####################################################################################
+
+sub change_privileges
+{
+ my ($destfile, $privileges) = @_;
+
+ my $localcall = "chmod $privileges " . "\"" . $destfile . "\"";
+ system($localcall);
+}
+
+####################################################################################
+# Cygwin: Setting privileges for files recursively
+####################################################################################
+
+sub change_privileges_full
+{
+ my ($target) = @_;
+
+ print "Changing privileges\n";
+
+ my $localcall = "chmod -R 755 " . "\"" . $target . "\"";
+ system($localcall);
+}
+
+######################################################
+# Creating a new directory with defined privileges
+######################################################
+
+sub create_directory_with_privileges
+{
+ my ($directory, $privileges) = @_;
+
+ my $returnvalue = 1;
+ my $infoline = "";
+
+ if (!(-d $directory))
+ {
+ my $localprivileges = oct("0".$privileges); # changes "777" to 0777
+ $returnvalue = mkdir($directory, $localprivileges);
+
+ if ($returnvalue)
+ {
+ my $localcall = "chmod $privileges $directory \>\/dev\/null 2\>\&1";
+ system($localcall);
+ }
+ }
+ else
+ {
+ my $localcall = "chmod $privileges $directory \>\/dev\/null 2\>\&1";
+ system($localcall);
+ }
+}
+
+######################################################
+# Creating a unique directory with pid extension
+######################################################
+
+sub create_pid_directory
+{
+ my ($directory) = @_;
+
+ $directory =~ s/\Q$separator\E\s*$//;
+ my $pid = $$; # process id
+ my $time = time(); # time
+
+ $directory = $directory . "_" . $pid . $time;
+
+ if ( ! -d $directory ) { create_directory($directory); }
+ else { exit_program("ERROR: Directory $directory already exists!"); }
+
+ return $directory;
+}
+
+####################################################################################
+# Copying files into installation set
+####################################################################################
+
+sub copy_files_into_directory_structure
+{
+ my ($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash) = @_;
+
+ print "Copying files\n";
+
+ for ( my $i = 1; $i <= $maxsequence; $i++ )
+ {
+ if ( exists($fileorder->{$i}) )
+ {
+ my $file = $fileorder->{$i};
+ if ( ! exists($filehash->{$file}->{'Component'}) ) { exit_program("ERROR: Did not find component for file: \"$file\"."); }
+ my $component = $filehash->{$file}->{'Component'};
+ if ( ! exists($componenthash->{$component}) ) { exit_program("ERROR: Did not find directory for component: \"$component\"."); }
+ my $dirname = $componenthash->{$component};
+ if ( ! exists($fullpathhash->{$dirname}) ) { exit_program("ERROR: Did not find full directory path for dir: \"$dirname\"."); }
+ my $destdir = $fullpathhash->{$dirname};
+ if ( ! exists($filehash->{$file}->{'FileName'}) ) { exit_program("ERROR: Did not find \"FileName\" for file: \"$file\"."); }
+ my $destfile = $filehash->{$file}->{'FileName'};
+
+ $destfile = $destdir . $separator . $destfile;
+ my $sourcefile = $unpackdir . $separator . $file;
+
+ if ( ! -f $sourcefile )
+ {
+ # It is possible, that this was an unpacked file
+ # Looking in the dirhash, to find the subdirectory in the installation set (the id is $dirname)
+ # subdir is not recursively analyzed, only one directory.
+
+ my $oldsourcefile = $sourcefile;
+ my $subdir = "";
+ if ( exists($dirhash->{$dirname}->{'DefaultDir'}) ) { $subdir = $dirhash->{$dirname}->{'DefaultDir'} . $separator; }
+ my $realfilename = $filehash->{$file}->{'FileName'};
+ my $localinstalldir = $installdir;
+
+ $localinstalldir =~ s/\\\s*$//;
+ $localinstalldir =~ s/\/\s*$//;
+
+ $sourcefile = $localinstalldir . $separator . $subdir . $realfilename;
+
+ if ( ! -f $sourcefile ) { exit_program("ERROR: File not found: \"$oldsourcefile\" (or \"$sourcefile\")."); }
+ }
+
+ my $copyreturn = copy($sourcefile, $destfile);
+
+ if ( ! $copyreturn) { exit_program("ERROR: Could not copy $source to $dest\n"); }
+
+ # if (( $^O =~ /cygwin/i ) && ( $destfile =~ /\.exe\s*$/ )) { change_privileges($destfile, "775"); }
+ }
+ # else # allowing missing sequence numbers ?
+ # {
+ # exit_program("ERROR: No file assigned to sequence $i");
+ # }
+ }
+}
+
+######################################################
+# Removing a complete directory with subdirectories
+######################################################
+
+sub remove_complete_directory
+{
+ my ($directory, $start) = @_;
+
+ my @content = ();
+ my $infoline = "";
+
+ $directory =~ s/\Q$separator\E\s*$//;
+
+ if ( -d $directory )
+ {
+ if ( $start ) { print "Removing directory $directory\n"; }
+
+ opendir(DIR, $directory);
+ @content = readdir(DIR);
+ closedir(DIR);
+
+ my $oneitem;
+
+ foreach $oneitem (@content)
+ {
+ if ((!($oneitem eq ".")) && (!($oneitem eq "..")))
+ {
+ my $item = $directory . $separator . $oneitem;
+
+ if ( -f $item || -l $item ) # deleting files or links
+ {
+ unlink($item);
+ }
+
+ if ( -d $item ) # recursive
+ {
+ remove_complete_directory($item, 0);
+ }
+ }
+ }
+
+ # try to remove empty directory
+ my $returnvalue = rmdir $directory;
+ if ( ! $returnvalue ) { print "Warning: Problem with removing empty dir $directory\n"; }
+ }
+}
+
+####################################################################################
+# Defining a temporary path
+####################################################################################
+
+sub get_temppath
+{
+ my $temppath = "";
+
+ if (( $ENV{'TMP'} ) || ( $ENV{'TEMP'} ))
+ {
+ if ( $ENV{'TMP'} ) { $temppath = $ENV{'TMP'}; }
+ elsif ( $ENV{'TEMP'} ) { $temppath = $ENV{'TEMP'}; }
+
+ $temppath =~ s/\Q$separator\E\s*$//; # removing ending slashes and backslashes
+ $temppath = $temppath . $separator . $globaltempdirname;
+ $temppath = mkdtemp($temppath);
+
+ my $dirsave = $temppath;
+
+ $temppath = $temppath . $separator . "a";
+ $temppath = create_pid_directory($temppath);
+
+ if ( ! -d $temppath ) { exit_program("ERROR: Failed to create directory $temppath ! Possible reason: Wrong privileges in directory $dirsave."); }
+
+ if ( $^O =~ /cygwin/i )
+ {
+ $temppath =~ s/\\/\\\\/g;
+ chomp( $temppath = qx{cygpath -w "$temppath"} );
+ }
+
+ $savetemppath = $temppath;
+ }
+ else
+ {
+ exit_program("ERROR: Could not set temporary directory (TMP and TEMP not set!).");
+ }
+
+ return $temppath;
+}
+
+####################################################################################
+# Reading one file
+####################################################################################
+
+sub read_file
+{
+ my ($localfile) = @_;
+
+ my @localfile = ();
+
+ open( IN, "<$localfile" ) || exit_program("ERROR: Cannot open file $localfile for reading");
+
+ # Don't use "my @localfile = <IN>" here, because
+ # perl has a problem with the internal "large_and_huge_malloc" function
+ # when calling perl using MacOS 10.5 with a perl built with MacOS 10.4
+ while ( $line = <IN> ) {
+ push @localfile, $line;
+ }
+
+ close( IN );
+
+ return \@localfile;
+}
+
+###############################################################
+# Setting the time string for the
+# Summary Information stream in the
+# msi database of the admin installations.
+###############################################################
+
+sub get_sis_time_string
+{
+ # Syntax: <yyyy/mm/dd hh:mm:ss>
+ my $second = (localtime())[0];
+ my $minute = (localtime())[1];
+ my $hour = (localtime())[2];
+ my $day = (localtime())[3];
+ my $month = (localtime())[4];
+ my $year = 1900 + (localtime())[5];
+ $month++;
+
+ if ( $second < 10 ) { $second = "0" . $second; }
+ if ( $minute < 10 ) { $minute = "0" . $minute; }
+ if ( $hour < 10 ) { $hour = "0" . $hour; }
+ if ( $day < 10 ) { $day = "0" . $day; }
+ if ( $month < 10 ) { $month = "0" . $month; }
+
+ my $timestring = $year . "/" . $month . "/" . $day . " " . $hour . ":" . $minute . ":" . $second;
+
+ return $timestring;
+}
+
+###############################################################
+# Writing content of administrative installations into
+# Summary Information Stream of msi database.
+# This is required for example for following
+# patch processes using Windows Installer service.
+###############################################################
+
+sub write_sis_info
+{
+ my ($msidatabase) = @_;
+
+ print "Setting SIS in msi database\n";
+
+ if ( ! -f $msidatabase ) { exit_program("ERROR: Cannot find file $msidatabase"); }
+
+ my $msiinfo = "msiinfo.exe"; # Has to be in the path
+ my $infoline = "";
+ my $systemcall = "";
+ my $returnvalue = "";
+
+ # Required setting for administrative installations:
+ # -w 4 (source files are unpacked), wordcount
+ # -s <date of admin installation>, LastPrinted, Syntax: <yyyy/mm/dd hh:mm:ss>
+ # -l <person_making_admin_installation>, LastSavedBy
+
+ my $wordcount = 4; # Unpacked files
+ my $lastprinted = get_sis_time_string();
+ my $lastsavedby = "Installer";
+
+ my $localmsidatabase = $msidatabase;
+
+ if( $^O =~ /cygwin/i )
+ {
+ $localmsidatabase = qx{cygpath -w "$localmsidatabase"};
+ $localmsidatabase =~ s/\\/\\\\/g;
+ $localmsidatabase =~ s/\s*$//g;
+ }
+
+ $systemcall = $msiinfo . " " . "\"" . $localmsidatabase . "\"" . " -w " . $wordcount . " -s " . "\"" . $lastprinted . "\"" . " -l $lastsavedby";
+
+ $returnvalue = system($systemcall);
+
+ if ($returnvalue)
+ {
+ $infoline = "ERROR: Could not execute $systemcall !\n";
+ exit_program($infoline);
+ }
+}
+
+###############################################################
+# Convert time string
+###############################################################
+
+sub convert_timestring
+{
+ my ($secondstring) = @_;
+
+ my $timestring = "";
+
+ if ( $secondstring < 60 ) # less than a minute
+ {
+ if ( $secondstring < 10 ) { $secondstring = "0" . $secondstring; }
+ $timestring = "00\:$secondstring min\.";
+ }
+ elsif ( $secondstring < 3600 )
+ {
+ my $minutes = $secondstring / 60;
+ my $seconds = $secondstring % 60;
+ if ( $minutes =~ /(\d*)\.\d*/ ) { $minutes = $1; }
+ if ( $minutes < 10 ) { $minutes = "0" . $minutes; }
+ if ( $seconds < 10 ) { $seconds = "0" . $seconds; }
+ $timestring = "$minutes\:$seconds min\.";
+ }
+ else # more than one hour
+ {
+ my $hours = $secondstring / 3600;
+ my $secondstring = $secondstring % 3600;
+ my $minutes = $secondstring / 60;
+ my $seconds = $secondstring % 60;
+ if ( $hours =~ /(\d*)\.\d*/ ) { $hours = $1; }
+ if ( $minutes =~ /(\d*)\.\d*/ ) { $minutes = $1; }
+ if ( $hours < 10 ) { $hours = "0" . $hours; }
+ if ( $minutes < 10 ) { $minutes = "0" . $minutes; }
+ if ( $seconds < 10 ) { $seconds = "0" . $seconds; }
+ $timestring = "$hours\:$minutes\:$seconds hours";
+ }
+
+ return $timestring;
+}
+
+###############################################################
+# Returning time string for logging
+###############################################################
+
+sub get_time_string
+{
+ my $currenttime = time();
+ $currenttime = $currenttime - $starttime;
+ $currenttime = convert_timestring($currenttime);
+ $currenttime = localtime() . " \(" . $currenttime . "\)\n";
+ return $currenttime;
+}
+
+####################################################################################
+# Simulating an administrative installation
+####################################################################################
+
+$starttime = time();
+
+getparameter();
+controlparameter();
+check_local_msidb();
+check_system_path();
+my $temppath = get_temppath();
+
+print("\nmsi database: $databasepath\n");
+print("Destination directory: $targetdir\n" );
+
+my $helperdir = $temppath . $separator . "installhelper";
+create_directory($helperdir);
+
+# Get File.idt, Component.idt and Directory.idt from database
+
+my $tablelist = "File Directory Component Media CustomAction";
+extract_tables_from_database($databasepath, $helperdir, $tablelist);
+
+# Set unpackdir
+my $unpackdir = $helperdir . $separator . "unpack";
+create_directory($unpackdir);
+
+# Reading media table to check for internal cabinet files
+my $filename = $helperdir . $separator . "Media.idt";
+if ( ! -f $filename ) { exit_program("ERROR: Could not find required file: $filename !"); }
+my $filecontent = read_file($filename);
+my $cabfilehash = analyze_media_file($filecontent);
+
+# Check, if there are internal cab files
+my ( $contains_internal_cabfiles, $all_internal_cab_files) = check_for_internal_cabfiles($cabfilehash);
+
+if ( $contains_internal_cabfiles )
+{
+ # Set unpackdir
+ my $cabdir = $helperdir . $separator . "internal_cabs";
+ create_directory($cabdir);
+ my $from = cwd();
+ chdir($cabdir);
+ # Exclude all cabinet files from database
+ my $all_excluded_cabs = extract_cabs_from_database($databasepath, $all_internal_cab_files);
+ print "Unpacking files from internal cabinet file(s)\n";
+ foreach my $cabfile ( @{$all_excluded_cabs} ) { unpack_cabinet_file($cabfile, $unpackdir); }
+ chdir($from);
+}
+
+# Unpack all cab files into $helperdir, cab files must be located next to msi database
+my $installdir = $databasepath;
+
+get_path_from_fullqualifiedname(\$installdir);
+
+my $databasefilename = $databasepath;
+make_absolute_filename_to_relative_filename(\$databasefilename);
+
+my $cabfiles = find_file_with_file_extension("cab", $installdir);
+
+if (( $#{$cabfiles} < 0 ) && ( ! $contains_internal_cabfiles )) { exit_program("ERROR: Did not find any cab file in directory $installdir"); }
+
+print "Unpacking files from cabinet file(s)\n";
+for ( my $i = 0; $i <= $#{$cabfiles}; $i++ )
+{
+ my $cabfile = $installdir . $separator . ${$cabfiles}[$i];
+ unpack_cabinet_file($cabfile, $unpackdir);
+}
+
+# Reading tables
+$filename = $helperdir . $separator . "Directory.idt";
+$filecontent = read_file($filename);
+my $dirhash = analyze_directory_file($filecontent);
+
+$filename = $helperdir . $separator . "Component.idt";
+$filecontent = read_file($filename);
+my $componenthash = analyze_component_file($filecontent);
+
+$filename = $helperdir . $separator . "File.idt";
+$filecontent = read_file($filename);
+my ( $filehash, $fileorder, $maxsequence ) = analyze_file_file($filecontent);
+
+# Creating the directory structure
+my $fullpathhash = create_directory_structure($dirhash, $targetdir);
+
+# Copying files
+copy_files_into_directory_structure($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash);
+if ( $^O =~ /cygwin/i ) { change_privileges_full($targetdir); }
+
+my $msidatabase = $targetdir . $separator . $databasefilename;
+my $copyreturn = copy($databasepath, $msidatabase);
+if ( ! $copyreturn) { exit_program("ERROR: Could not copy $source to $dest\n"); }
+
+# Saving info in Summary Information Stream of msi database (required for following patches)
+if ( $msiinfo_available ) { write_sis_info($msidatabase); }
+
+# Removing the helper directory
+remove_complete_directory($temppath, 1);
+
+print "\nSuccessful installation: " . get_time_string();
diff --git a/setup_native/scripts/downloadscript.sh b/setup_native/scripts/downloadscript.sh
new file mode 100644
index 000000000..7246ebcda
--- /dev/null
+++ b/setup_native/scripts/downloadscript.sh
@@ -0,0 +1,104 @@
+#!/bin/sh
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+linenum=LINENUMBERPLACEHOLDER
+
+UNPACKDIR=/var/tmp/unpack_PRODUCTNAMEPLACEHOLDER
+diskSpaceRequired=DISCSPACEPLACEHOLDER
+checksum=CHECKSUMPLACEHOLDER
+
+EXTRACTONLY="no"
+if [ "$1" = "-x" ]
+then
+ EXTRACTONLY=yes
+fi
+
+# Determining current platform
+
+platform=`uname -s`
+
+case $platform in
+SunOS)
+ tail_prog="tail"
+ ;;
+Linux)
+ tail_prog="tail -n"
+ ;;
+*)
+ tail_prog="tail"
+ ;;
+esac
+
+# Asking for the unpack directory
+
+echo
+echo "Select the directory in which to save the unpacked files. [$UNPACKDIR] "
+read reply leftover
+if [ "x$reply" != "x" ]
+then
+ UNPACKDIR="$reply"
+fi
+
+if [ -d $UNPACKDIR ]; then
+ printf "Directory $UNPACKDIR already exists.\n"
+ printf "Please select a new directory name.\n"
+ exit 1
+fi
+
+# Unpacking
+
+mkdir -m 700 $UNPACKDIR
+
+diskSpace=`df -k $UNPACKDIR | $tail_prog -1 | awk '{if ( $4 ~ /%/) { print $3 } else { print $4 } }'`
+if [ $diskSpace -lt $diskSpaceRequired ]; then
+ printf "The selected drive does not have enough disk space available.\n"
+ printf "PRODUCTNAMEPLACEHOLDER requires at least %s kByte.\n" $diskSpaceRequired
+ exit 1
+fi
+
+trap 'rm -rf $UNPACKDIR; exit 1' HUP INT QUIT TERM
+
+if [ -x /usr/bin/sum ] ; then
+ echo "File is being checked for errors ..."
+
+ sum=`$tail_prog +$linenum $0 | /usr/bin/sum`
+ sum=`echo $sum | awk '{ print $1 }'`
+
+ if [ $sum != $checksum ]; then
+ echo "The download file appears to be corrupted. Please download PRODUCTNAMEPLACEHOLDER again."
+ exit 1
+ fi
+fi
+
+echo "Unpacking ..."
+
+$tail_prog +$linenum $0 | (cd $UNPACKDIR; tar xf -)
+
+echo "All files have been successfully unpacked."
+
+if [ "$EXTRACTONLY" != "yes" ]
+then
+ if [ -f $UNPACKDIR/setup ]
+ then
+ chmod 775 $UNPACKDIR/setup
+ $UNPACKDIR/setup
+ fi
+fi
+
+exit 0
diff --git a/setup_native/scripts/fake-db.spec b/setup_native/scripts/fake-db.spec
new file mode 100644
index 000000000..a7a5c318b
--- /dev/null
+++ b/setup_native/scripts/fake-db.spec
@@ -0,0 +1,57 @@
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+Name: fake-db
+Version: 1.0
+Release: 0
+Summary: This is a dummy package
+Group: dummy
+License: LGPLv3 with MPLv2 on ALv2
+BuildArch: noarch
+AutoReqProv: no
+%define _tmppath /tmp
+#BuildRoot: %{_tmppath}/%{name}-root
+Provides: libgnomevfs-2.so.0
+Provides: libgnomevfs-2.so.0()(64bit)
+Provides: libfreetype.so.6
+Provides: libfreetype.so.6()(64bit)
+Provides: /bin/sh
+Provides: /bin/basename
+Provides: /bin/cat
+Provides: /bin/cp
+Provides: /bin/gawk
+Provides: /bin/grep
+Provides: /bin/ln
+Provides: /bin/ls
+Provides: /bin/mkdir
+Provides: /bin/mv
+Provides: /bin/pwd
+Provides: /bin/rm
+Provides: /bin/sed
+Provides: /bin/sort
+Provides: /bin/touch
+Provides: /usr/bin/cut
+Provides: /usr/bin/dirname
+Provides: /usr/bin/expr
+Provides: /usr/bin/find
+Provides: /usr/bin/tail
+Provides: /usr/bin/tr
+Provides: /usr/bin/wc
+%description
+a dummy package
+%files
diff --git a/setup_native/scripts/install_create.pl b/setup_native/scripts/install_create.pl
new file mode 100644
index 000000000..c7659c40e
--- /dev/null
+++ b/setup_native/scripts/install_create.pl
@@ -0,0 +1,60 @@
+: # -*- perl -*-
+eval 'exec perl -wS $0 ${1+"$@"}'
+ if 0;
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+# create setup self extracting script
+
+if( $#ARGV < 2 )
+ {
+ print <<ENDHELP;
+USAGE: $0 <inputshellscript> <libraryfile> <outputshellscript>
+ <inputshellscript>: the start shell script, located next to this perl script
+ <libraryfile>: the library file, that is included into the shell script
+ <outfile>: the target shellscript
+
+ENDHELP
+ exit;
+ }
+
+$infile = $ARGV[0];
+$library = $ARGV[1];
+$outfile = $ARGV[2];
+
+# read script header
+open( SCRIPT, "<$infile" ) || die "cannot open $infile";
+open( OUTFILE, ">$outfile$$.tmp" ) || die "cannot open $outfile";
+@scriptlines = <SCRIPT>;
+$linenum = $#scriptlines+2;
+foreach (@scriptlines)
+{
+ # lineend conversion (be on the safe side)
+ chomp;
+ $_ =~ tr/\r//;
+ s/^\s*linenum=.*$/linenum=$linenum/;
+ print OUTFILE "$_\n";
+}
+close( SCRIPT );
+close( OUTFILE );
+
+system( "cat $library >>$outfile$$.tmp" );
+rename "$outfile$$.tmp", "$outfile";
+
+chmod 0775, $outfile;
+
+exit;
diff --git a/setup_native/scripts/install_linux.sh b/setup_native/scripts/install_linux.sh
new file mode 100644
index 000000000..df224211e
--- /dev/null
+++ b/setup_native/scripts/install_linux.sh
@@ -0,0 +1,313 @@
+#!/bin/bash
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+ADD="no"
+LINK="no"
+UPDATE="ask"
+UNPACKDIR=""
+USAGE="Usage: $0 [-a,--add] [-l,--link] [-U,--update] [-h,--help] <rpm-source-dir> <office-installation-dir>"
+
+help()
+{
+ echo
+ echo "User Mode Installation script for developer and knowledgeable early access tester"
+ echo
+ echo "This installation method is not intended for use in a production environment!"
+ echo "Using this script is unsupported and completely at your own risk"
+ echo
+ echo "Usage:" $0 [-lU] "<rpm-source-dir> <office-installation-dir>"
+ echo " <rpm-source-dir>: directory *only* containing the Linux rpm packages to be installed"
+ echo " or language pack shell script containing the rpm packages"
+ echo " <office-installation-dir>: directory to where the office will get installed into"
+ echo
+ echo "Optional Parameter:"
+ echo " -a,--add: add to an existing <office-installation-dir>"
+ echo " -l,--link: create a link \"soffice\" in $HOME"
+ echo " -U,--update: update without asking"
+ echo " -h,--help: output this help"
+ echo
+}
+
+try_to_unpack_languagepack_file()
+{
+ FILENAME=$PACKAGE_PATH
+
+ # Checking, if $FILENAME is a language pack.
+ # String "language package" has to exist in the shell script file.
+ # If this is no language pack, the installation is not supported
+
+ SEARCHSTRING=`head --lines=10 $FILENAME | grep "language package"`
+
+ if [ ! -z "$SEARCHSTRING" ]
+ then
+ echo "First parameter $FILENAME is a language pack";
+ else
+ printf "\nERROR: First parameter $FILENAME is a file, but no language pack shell script.\n"
+ echo $USAGE
+ exit 2
+ fi
+
+ echo "Unpacking shell script $FILENAME"
+ TAILLINE=`head --lines=20 $FILENAME | sed --quiet 's/linenum=//p'`
+
+ UNPACKDIR=/var/tmp/install_$$
+ mkdir $UNPACKDIR
+ # UNPACKDIR=`mktemp -d`
+ tail -n +$TAILLINE $FILENAME | gunzip | (cd $UNPACKDIR; tar xvf -)
+
+ # Setting the new package path, in which the packages exist
+ PACKAGE_PATH=$UNPACKDIR
+
+ # Setting variable UPDATE, because an Office installation has to exist, if a language pack shall be installed
+ UPDATE="yes"
+}
+
+#
+# this script is for userland not for root
+#
+
+if [ $UID -eq 0 ]
+then
+ printf "\nThis script is for installation without administrative rights only\nPlease use rpm to install as root\n"
+ help
+ exit 2
+fi
+
+set -- `getopt -u -o 'alhU' -l 'add,link,help,update' -- $*`
+
+if [ $? != 0 ]
+then
+ echo $USAGE
+ exit 2
+fi
+
+for i in $*
+do
+ case $i in
+ -a|--add) ADD="yes"; shift;;
+ -h|--help) help; exit 0;;
+ -l|--link) LINK="yes"; shift;;
+ -U|--update) UPDATE="yes"; shift;;
+ --) shift; break;;
+ esac
+done
+
+if [ $# != 2 ]
+then
+ echo $USAGE
+ echo "Example: $0 . ~/libreoffice"
+ exit 2
+fi
+
+PACKAGE_PATH=$1
+
+#
+# If the first parameter is a shell script (download installation set), the packages have to
+# be unpacked into temp directory
+#
+
+if [ -f "$PACKAGE_PATH" ]
+then
+ try_to_unpack_languagepack_file
+fi
+
+#
+# Check and get the list of packages to install
+#
+
+RPMLIST=`find $PACKAGE_PATH -maxdepth 2 -type f -name "*.rpm" ! -name "*-menus-*" ! -name "*-desktop-integration-*" ! -name "jre*" ! -name "*-userland-*" -print`
+
+if [ -z "$RPMLIST" ]
+then
+ printf "\n$0: No packages found in $PACKAGE_PATH\n"
+ exit 2
+fi
+
+# #163256# check if we are on a debian system...
+if rpm --help | grep debian >/dev/null;
+then
+ DEBIAN_FLAGS="--force-debian --nodeps"
+else
+ DEBIAN_FLAGS=
+fi
+
+#
+# Determine whether this should be an update or a fresh install
+#
+
+INSTALLDIR=$2
+RPM_DB_PATH=${INSTALLDIR}/.RPM_OFFICE_DATABASE
+
+# Check for versionrc
+if [ -f ${INSTALLDIR}/program/versionrc ]; then VERSIONRC=versionrc; fi
+
+if [ "$UPDATE" = "ask" ]
+then
+ PRODUCT=`sed --silent -e "
+/^buildid=/ {
+s/buildid=\(.*\)/ [\1]/
+h
+}
+/^ProductKey=/ {
+s/ProductKey=//
+G
+p
+}" ${INSTALLDIR}/program/${VERSIONRC:-bootstraprc} 2>/dev/null | tr -d "\012"`
+
+ if [ ! -z "$PRODUCT" ]
+ then
+ echo
+ echo "Found an installation of $PRODUCT in $INSTALLDIR"
+ echo
+ while [ "$UPDATE" != "yes" ]
+ do
+ read -a UPDATE -p "Do you want to update this installation (yes/no)? "
+ if [ "$UPDATE" = "no" ]
+ then
+ exit 2
+ fi
+ done
+ elif [ -d $RPM_DB_PATH -a "$ADD" = "no" ]
+ then
+ echo
+ echo "The following packages are already installed in $INSTALLDIR"
+ echo
+ rpm --dbpath `cd $RPM_DB_PATH; pwd` --query --all
+ echo
+ while [ "$UPDATE" != "yes" ]
+ do
+ read -a UPDATE -p "Do you want to continue with this installation (yes/no)? "
+ if [ "$UPDATE" = "no" ]
+ then
+ exit 2
+ fi
+ done
+ else
+ UPDATE="no"
+ fi
+fi
+
+#
+# Check/Create installation directory
+#
+
+if [ "$UPDATE" = "yes" ]
+then
+ # restore original bootstraprc
+ mv -f ${INSTALLDIR}/program/bootstraprc.orig ${INSTALLDIR}/program/bootstraprc 2>/dev/null
+
+ # the RPM_DB_PATH must be absolute
+ if [ ! "${RPM_DB_PATH:0:1}" = "/" ]; then
+ RPM_DB_PATH=`cd ${RPM_DB_PATH}; pwd`
+ fi
+
+ # we should use --freshen for updates to not add languages with patches, but this will break
+ # language packs, so leave it for now ..
+# RPMCMD="--freshen"
+ RPMCMD="--upgrade"
+else
+ rmdir ${INSTALLDIR} 2>/dev/null
+
+ mkdir -p $RPM_DB_PATH || exit 2
+ # XXX why? XXX
+ chmod 700 $RPM_DB_PATH
+
+ # the RPM_DB_PATH must be absolute
+ if [ ! "${RPM_DB_PATH:0:1}" = "/" ]; then
+ RPM_DB_PATH=`cd ${RPM_DB_PATH}; pwd`
+ fi
+
+ # Creating RPM database and initializing
+ if [ "$ADD" = "no" ]; then
+ rpm --initdb --dbpath $RPM_DB_PATH
+ fi
+
+ # Default install command
+ RPMCMD="--install"
+fi
+
+# populate the private rpm database with the dependencies needed
+FAKEDBRPM=/tmp/fake-db-1.0-$$.noarch.rpm
+linenum=???
+tail -n +$linenum $0 > $FAKEDBRPM
+
+rpm ${DEBIAN_FLAGS} --upgrade --ignoresize --dbpath $RPM_DB_PATH $FAKEDBRPM
+
+rm -f $FAKEDBRPM
+
+echo "Packages found:"
+for i in $RPMLIST ; do
+ echo `basename $i`
+done
+
+#
+# Perform the installation
+#
+
+echo
+echo "####################################################################"
+echo "# Installation of the found packages #"
+echo "####################################################################"
+echo
+echo "Path to the database: " $RPM_DB_PATH
+echo "Path to the packages: " $PACKAGE_PATH
+echo "Path to the installation: " $INSTALLDIR
+echo
+echo "Installing the RPMs"
+
+ABSROOT=`cd ${INSTALLDIR}; pwd`
+RELOCATIONS=`rpm -qp --qf "--relocate %{PREFIXES}=${ABSROOT}%{PREFIXES} \n" $RPMLIST | sort -u | tr -d "\012"`
+UserInstallation=\$BRAND_BASE_DIR/../UserInstallation rpm ${DEBIAN_FLAGS} --nodeps $RPMCMD --ignoresize -vh $RELOCATIONS --dbpath $RPM_DB_PATH $RPMLIST
+
+#
+# Create a link into the users home directory
+#
+
+if [ "$LINK" = "yes" ]
+then
+ find `cd "$INSTALLDIR" && pwd` -name soffice -type f -perm /u+x -exec /bin/bash -ce 'ln -sf "$0" "$HOME/soffice" && echo "Creating link from $0 to $HOME/soffice"' {} \;
+fi
+
+if [ "$UPDATE" = "yes" -a ! -f $INSTALLDIR/program/bootstraprc ]
+then
+ echo
+ echo "Update failed due to a bug in RPM, uninstalling .."
+ rpm ${DEBIAN_FLAGS} --erase -v --nodeps --dbpath $RPM_DB_PATH `rpm --query --queryformat "%{NAME} " --package $RPMLIST --dbpath $RPM_DB_PATH`
+ echo
+ echo "Now re-installing new packages .."
+ echo
+ rpm ${DEBIAN_FLAGS} --install --nodeps --ignoresize -vh $RELOCATIONS --dbpath $RPM_DB_PATH $RPMLIST
+ echo
+fi
+
+# patch the "bootstraprc" to create a self-containing installation
+find "$INSTALLDIR" -type f -name bootstraprc -exec /bin/bash -ce 'test ! -e "$0".orig && mv "$0" "$0".orig && sed '\''s,^UserInstallation=$SYSUSERCONFIG.*,UserInstallation=$BRAND_BASE_DIR/../UserInstallation,'\'' "$0".orig > "$0"' {} \;
+
+# if an unpack directory exists, it can be removed now
+if [ ! -z "$UNPACKDIR" ]
+then
+ rm $UNPACKDIR/*.rpm
+ rmdir $UNPACKDIR
+ echo "Removed temporary directory $UNPACKDIR"
+fi
+
+echo
+echo "Installation done ..."
+
+exit 0
diff --git a/setup_native/scripts/langpackscript.sh b/setup_native/scripts/langpackscript.sh
new file mode 100644
index 000000000..4f0dd5484
--- /dev/null
+++ b/setup_native/scripts/langpackscript.sh
@@ -0,0 +1,170 @@
+#!/bin/sh
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+MYUID=`id | sed "s/(.*//g" | sed "s/.*=//"`
+
+if [ $MYUID -ne 0 ]
+then
+ echo You need to have super-user rights to install this language package
+ exit 1
+fi
+
+linenum=LINENUMBERPLACEHOLDER
+
+# Determining current platform
+
+platform=`uname -s`
+
+case $platform in
+SunOS)
+ tail_prog="tail"
+ ;;
+Linux)
+ tail_prog="tail -n"
+ ;;
+*)
+ tail_prog="tail"
+ ;;
+esac
+
+more << "EOF"
+LICENSEFILEPLACEHOLDER
+EOF
+
+agreed=
+while [ x$agreed = x ]; do
+ echo
+ echo "Do you agree to the above license terms? [yes or no] "
+ read reply leftover
+ case $reply in
+ y* | Y*)
+ agreed=1;;
+ n* | N*)
+ echo "If you don't agree to the license you can't install this software";
+ exit 1;;
+ esac
+done
+
+case $platform in
+SunOS)
+ SEARCHPACKAGENAME="BASISPACKAGEPREFIXPLACEHOLDERPRODUCTVERSIONPLACEHOLDER-core01"
+ echo
+ echo "Searching for the FULLPRODUCTNAMELONGPLACEHOLDER installation ..."
+ PACKAGENAME=`pkginfo -x | grep $SEARCHPACKAGENAME | sed "s/ .*//"`
+ if [ "x$PACKAGENAME" != "x" ]
+ then
+ PRODUCTINSTALLLOCATION="`pkginfo -r $PACKAGENAME`"
+ else
+ echo "FULLPRODUCTNAMELONGPLACEHOLDER not installed (no package $SEARCHPACKAGENAME installed)"
+ exit 1
+ fi
+ ;;
+Linux)
+ SEARCHPACKAGENAME="BASISPACKAGEPREFIXPLACEHOLDERPRODUCTVERSIONPLACEHOLDER-core01"
+ FIXPATH="/openoffice.org"
+ echo
+ echo "Searching for the FULLPRODUCTNAMELONGPLACEHOLDER installation ..."
+ RPMNAME=`rpm -qa | grep $SEARCHPACKAGENAME`
+ if [ "x$RPMNAME" != "x" ]
+ then
+ PRODUCTINSTALLLOCATION="`rpm -ql $RPMNAME | head -n 1`"
+ else
+ echo "FULLPRODUCTNAMELONGPLACEHOLDER not installed (no package $SEARCHPACKAGENAME installed)"
+ exit 1
+ fi
+ PRODUCTINSTALLLOCATION=`echo $PRODUCTINSTALLLOCATION | sed "s#${FIXPATH}##"`
+ ;;
+*)
+ echo "Unsupported platform"
+ exit 1
+ ;;
+esac
+
+# Asking for the installation directory
+
+# echo
+# echo "Where do you want to install the language pack ? [$PRODUCTINSTALLLOCATION] "
+# read reply leftover
+# if [ "x$reply" != "x" ]
+# then
+# PRODUCTINSTALLLOCATION="$reply"
+# fi
+
+# Unpacking
+
+outdir=/var/tmp/install_$$
+mkdir $outdir
+
+#diskSpace=`df -k $outdir | $tail_prog -1 | awk '{if ( $4 ~ /%/) { print $3 } else { print $4 } }'`
+#if [ $diskSpace -lt $diskSpaceRequired ]; then
+# printf "You will need at least %s kBytes of free disk space\n" $diskSpaceRequired
+# printf "Please free up the required disk space and try again\n"
+# exit 3
+#fi
+
+trap 'rm -rf $outdir; exit 1' HUP INT QUIT TERM
+echo "Unpacking and installing..."
+
+#if [ -x /usr/bin/sum ] ; then
+# echo "Checksumming..."
+#
+# sum=`/usr/bin/sum $outdir/$outname`
+# index=1
+# for s in $sum
+# do
+# case $index in
+# 1) sum1=$s;
+# index=2;
+# ;;
+# 2) sum2=$s;
+# index=3;
+# ;;
+# esac
+# done
+# if expr $sum1 != <sum1replace> || expr $sum2 != <sum2replace> ; then
+# echo "The download file appears to be corrupted. Please refer"
+# echo "to the Troubleshooting section of the Installation"
+# exit 1
+# fi
+#else
+# echo "Can't find /usr/bin/sum to do checksum. Continuing anyway."
+#fi
+
+case $platform in
+SunOS)
+ $tail_prog +$linenum $0 | gunzip | (cd $outdir; tar xvf -)
+ adminfile=$outdir/admin.$$
+ echo "basedir=$PRODUCTINSTALLLOCATION" > $adminfile
+INSTALLLINES
+ ;;
+Linux)
+ $tail_prog +$linenum $0 | gunzip | (cd $outdir; tar xvf -)
+INSTALLLINES
+ ;;
+*)
+ echo "Unsupported platform"
+ exit 1
+ ;;
+esac
+
+rm -rf $outdir
+
+echo "Done..."
+
+exit 0
diff --git a/setup_native/scripts/mac_install.script b/setup_native/scripts/mac_install.script
new file mode 100644
index 000000000..57609636e
--- /dev/null
+++ b/setup_native/scripts/mac_install.script
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+# shell script as a workaround since it is hard to impossible to store compiled
+# applescript in CVS and running osacompile would require a GUI session while
+# building (or root privileges)
+# using osascript only works when the shell script is camouflaged as application
+
+MY_DIR=$(dirname "$0")
+
+osascript "$MY_DIR/osx_install.applescript"
diff --git a/setup_native/scripts/osx_install_languagepack.applescript b/setup_native/scripts/osx_install_languagepack.applescript
new file mode 100644
index 000000000..3b4a116fb
--- /dev/null
+++ b/setup_native/scripts/osx_install_languagepack.applescript
@@ -0,0 +1,175 @@
+(*
+
+ This file is part of the LibreOffice project.
+
+ This Source Code Form is subject to the terms of the Mozilla Public
+ License, v. 2.0. If a copy of the MPL was not distributed with this
+ file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+ This file incorporates work covered by the following license notice:
+
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed
+ with this work for additional information regarding copyright
+ ownership. The ASF licenses this file to you under the Apache
+ License, Version 2.0 (the "License"); you may not use this file
+ except in compliance with the License. You may obtain a copy of
+ the License at http://www.apache.org/licenses/LICENSE-2.0 .
+
+This script is meant to
+ 1) Identify installed instances of the product
+ 2) check whether the user has write-access (and if not
+ ask for authentication)
+ 3) install the shipped tarball
+*)
+
+-- strings for localisations - to be meant to be replaced
+-- by a makefile or similar
+set OKLabel to "[OKLabel]"
+set InstallLabel to "[InstallLabel]"
+set AbortLabel to "[AbortLabel]"
+set intro to "[IntroText1]
+
+[IntroText2]
+
+[IntroText3]"
+set chooseMyOwn to "[ChooseMyOwnText]"
+set listPrompt to "[ListPromptText]"
+set chooseManual to "[ChooseManualText]"
+set listOKLabel to "[ListOKLabelText]"
+set listCancelLabel to "[ListCancelLabel]"
+set appInvalid to "[AppInvalidText1]
+
+[AppInvalidText2]" -- string will begin with the chosen application's name
+set startInstall to "[StartInstallText1]
+
+[StartInstallText2]"
+set IdentifyQ to "[IdentifyQText]
+
+[IdentifyQText2]"
+set IdentifyYES to "[IdentifyYES]"
+set IdentifyNO to "[IdentifyNO]"
+set installFailed to "[InstallFailedText]"
+set installComplete to "[InstallCompleteText]
+
+[InstallCompleteText2]"
+
+set sourcedir to (do shell script "dirname " & quoted form of POSIX path of (path to of me))
+
+activate
+display dialog intro buttons {AbortLabel, InstallLabel} default button 2
+
+if (button returned of result) is AbortLabel then
+ return 2
+end if
+
+set found_ooos_all to ""
+-- command might return an error if spotlight is disabled completely
+try
+ set found_ooos_all to (do shell script "mdfind \"kMDItemContentType == 'com.apple.application-bundle' && kMDItemDisplayName == '[PRODUCTNAME]'\"")
+end try
+set found_ooos_all to found_ooos_all & "
+" & chooseMyOwn
+
+set found_ooos_all_paragraphs to paragraphs in found_ooos_all
+
+set found_ooos to {}
+repeat with currentApp in found_ooos_all_paragraphs
+ if currentApp does not start with "/Volumes" then
+ copy currentApp to the end of found_ooos
+ end if
+end repeat
+
+-- repeat with oneApp in found_ooos
+-- display dialog oneApp
+-- end repeat
+
+-- the choice returned is of type "list"
+-- Show selection dialog only if more than one or no product was found
+-- The first item is an empty string, if no app was found and no app started with "/Volumes"
+-- The first item is chooseMyOwn, if no app was found and at least one app started with "/Volumes"
+if (get first item of found_ooos as string) is "" then
+ set the choice to (choose from list found_ooos default items (get second item of found_ooos) with prompt listPrompt OK button name listOKLabel cancel button name listCancelLabel)
+ if choice is false then
+ -- do nothing, the user cancelled the installation
+ return 2 --aborted by user
+ else if (choice as string) is chooseMyOwn then
+ -- yeah, one needs to use "choose file", otherwise
+ -- the user would not be able to select the .app
+ set the choice to POSIX path of (choose file with prompt chooseManual of type "com.apple.application-bundle" without showing package contents and invisibles)
+ end if
+else if (get first item of found_ooos as string) is chooseMyOwn then
+ set the choice to (choose from list found_ooos default items (get first item of found_ooos) with prompt listPrompt OK button name listOKLabel cancel button name listCancelLabel)
+ if choice is false then
+ -- do nothing, the user cancelled the installation
+ return 2 --aborted by user
+ else if (choice as string) is chooseMyOwn then
+ -- yeah, one needs to use "choose file", otherwise
+ -- the user would not be able to select the .app
+ set the choice to POSIX path of (choose file with prompt chooseManual of type "com.apple.application-bundle" without showing package contents and invisibles)
+ end if
+else if (get second item of found_ooos as string) is chooseMyOwn then
+ -- set choice to found installation
+ -- set the choice to (get first paragraph of found_ooos)
+ set the choice to (get first item of found_ooos)
+else
+ set the choice to (choose from list found_ooos default items (get first item of found_ooos) with prompt listPrompt OK button name listOKLabel cancel button name listCancelLabel)
+ if choice is false then
+ -- do nothing, the user cancelled the installation
+ return 2 --aborted by user
+ else if (choice as string) is chooseMyOwn then
+ -- yeah, one needs to use "choose file", otherwise
+ -- the user would not be able to select the .app
+ set the choice to POSIX path of (choose file with prompt chooseManual of type "com.apple.application-bundle" without showing package contents and invisibles)
+ end if
+end if
+
+-- now only check whether the path is really from [PRODUCTNAME]
+-- FIXME: https://bugs.documentfoundation.org/show_bug.cgi?id=134607
+-- try
+-- do shell script "mdls --raw --name kMDItemDisplayName --name kMDItemVersion " & quoted form of (choice as string) & " | xargs -0 | fgrep '[PRODUCTNAME] [PRODUCTVERSION]'"
+-- on error
+-- display dialog (choice as string) & appInvalid buttons {InstallLabel} default button 1 with icon 0
+-- return 3 --wrong target-directory
+-- end try
+
+(*
+display dialog startInstall buttons {AbortLabel, InstallLabel} default button 2
+
+if (button returned of result) is AbortLabel then
+ return 2
+end if
+*)
+
+-- touch extensions folder to have LO register bundled dictionaries
+set tarCommand to "/usr/bin/tar -C " & quoted form of (choice as string) & " -xjf " & quoted form of sourcedir & "/tarball.tar.bz2 && touch " & quoted form of (choice as string) & "/Contents/Resources/extensions"
+try
+ (* A start of unchanged LO must take place so Gatekeeper will verify
+ the signature prior to installing the languagepack
+ *)
+ set apppath to POSIX path of choice
+ if application apppath is not running then
+ -- this will flash the startcenter once...
+ tell application apppath to activate
+ tell application apppath to quit
+ end if
+ do shell script tarCommand
+
+on error errMSG number errNUM
+ display dialog IdentifyQ buttons {IdentifyYES, IdentifyNO} with icon 2
+ if (button returned of result) is IdentifyYES then
+ try
+ do shell script tarCommand with administrator privileges
+ on error errMSG number errNUM
+ display dialog installFailed buttons {OKLabel} default button 1 with icon 0
+ -- -60005 username/password wrong
+ -- -128 aborted by user
+ -- 2 error from tar - tarball not found (easy to test)
+ return errNUM
+ end try
+ else
+ return 2 -- aborted by user
+ end if
+end try
+
+display dialog installComplete buttons {OKLabel} default button 1
diff --git a/setup_native/scripts/uninstall_linux.sh b/setup_native/scripts/uninstall_linux.sh
new file mode 100644
index 000000000..8ae8ae7ae
--- /dev/null
+++ b/setup_native/scripts/uninstall_linux.sh
@@ -0,0 +1,72 @@
+#!/bin/bash
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+# Linux deinstallation
+# No parameter required, all RPMs listed in $HOME/.RPM_OFFICEDATABASE
+# will be removed.
+
+if [ $# -ne 1 ]
+then
+ echo
+ echo "Usage:" $0 "<office-installation-dir>"
+ echo " <inst-destination-dir>: directory where the office to be removed is installed"
+ echo
+ exit 2
+fi
+
+INSTALLDIR=$1
+
+# Check for old style .RPM_OFFICEDATABASE first
+if [ -d ${INSTALLDIR}/.RPM_OFFICEDATABASE ]; then
+ RPM_DB_PATH=${INSTALLDIR}/.RPM_OFFICEDATABASE
+else
+ RPM_DB_PATH=${INSTALLDIR}/.RPM_DATABASE
+fi
+
+# the RPM_DB_PATH must be absolute
+if [ ! "${RPM_DB_PATH:0:1}" = "/" ]; then
+ RPM_DB_PATH=`cd ${RPM_DB_PATH}; pwd`
+fi
+
+RPMLIST=`rpm --dbpath $RPM_DB_PATH --query --all`
+
+# Output ...
+clear
+echo "#########################################"
+echo "# Deinstallation of Office RPMs #"
+echo "#########################################"
+echo
+echo "Path to the RPM database: " $RPM_DB_PATH
+echo "RPMs to deinstall:"
+echo "$RPMLIST"
+echo "===================================================================="
+echo
+
+# Restore original bootstraprc
+mv -f $1/program/bootstraprc.orig $1/program/bootstraprc
+
+rpm --dbpath $RPM_DB_PATH --erase $RPMLIST || exit 2
+
+echo "Removing RPM database ..."
+rm -rf $RPM_DB_PATH
+
+echo
+echo "Deinstallation done."
+
+exit 0
diff --git a/setup_native/scripts/unpack_update.sh b/setup_native/scripts/unpack_update.sh
new file mode 100644
index 000000000..1af4865cd
--- /dev/null
+++ b/setup_native/scripts/unpack_update.sh
@@ -0,0 +1,50 @@
+#!/bin/sh
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+EXTENSION=`expr "//$1" : '.*\/.*\.\(t.*\)'`
+[ -z $EXTENSION ] && ( echo "Unable to determine file type"; exit 2 )
+
+BASEDIR=`dirname "$1"`
+FOLDER=`basename "$1" ".$EXTENSION"`
+NUM=1
+
+DESTPATH="$BASEDIR/$FOLDER"
+
+while [ -d "$DESTPATH" ]; do
+ NUM=$(expr $NUM + 1)
+ DESTPATH="$BASEDIR/$FOLDER-$NUM"
+done
+
+mkdir "$DESTPATH"
+cd "$DESTPATH"
+
+if [ "$EXTENSION" = "tar.gz" -o "$EXTENSION" = "tgz" ]; then
+ if [ -x /usr/bin/gzcat ]; then
+ /usr/bin/gzcat "$1" | tar -xf -
+ else
+ tar -xzf "$1"
+ fi
+elif [ "$EXTENSION" = "tar.bz2" -o "$EXTENSION" = "tbz2" ]; then
+ /usr/bin/bzcat "$1" | tar -xf -
+else
+ echo "Unsupported type of archive"
+ exit 2
+fi
+
+UPDATE=$(eval ls ./*/update) && SUBFOLDER=$(dirname $UPDATE) && mv $SUBFOLDER/* . && rmdir $SUBFOLDER && echo "$DESTPATH/update"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 02:59:59 +0000