diff options
Diffstat (limited to 'solenv/bin/modules/installer/windows/admin.pm')
| -rw-r--r-- | solenv/bin/modules/installer/windows/admin.pm | 515 |
1 files changed, 515 insertions, 0 deletions
diff --git a/solenv/bin/modules/installer/windows/admin.pm b/solenv/bin/modules/installer/windows/admin.pm new file mode 100644 index 000000000..27e4ba7c3 --- /dev/null +++ b/solenv/bin/modules/installer/windows/admin.pm @@ -0,0 +1,515 @@ +# +# This file is part of the LibreOffice project. +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# This file incorporates work covered by the following license notice: +# +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed +# with this work for additional information regarding copyright +# ownership. The ASF licenses this file to you under the Apache +# License, Version 2.0 (the "License"); you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.apache.org/licenses/LICENSE-2.0 . +# + +package installer::windows::admin; + +use File::Copy; +use installer::exiter; +use installer::files; +use installer::globals; +use installer::pathanalyzer; +use installer::systemactions; +use installer::worker; +use installer::windows::idtglobal; + +################################################################################# +# Unpacking cabinet files with expand +################################################################################# + +sub unpack_cabinet_file +{ + my ($cabfilename, $unpackdir) = @_; + + my $infoline = "Unpacking cabinet file: $cabfilename\n"; + push( @installer::globals::logfileinfo, $infoline); + + my $expandfile = "expand.exe"; # Has to be in the path + + # expand.exe has to be located in the system directory. + # Cygwin has another tool expand.exe, that converts tabs to spaces. This cannot be used of course. + # But this wrong expand.exe is typically in the PATH before this expand.exe, to unpack + # cabinet files. + + if ( $^O =~ /cygwin/i ) + { + $expandfile = qx(cygpath -u "$ENV{WINDIR}"/System32/expand.exe); + chomp $expandfile; + } + + my $expandlogfile = $unpackdir . $installer::globals::separator . "expand.log"; + + # exclude cabinet file + + my $systemcall = ""; + if ( $^O =~ /cygwin/i ) { + my $localunpackdir = qx{cygpath -w "$unpackdir"}; + chomp ($localunpackdir); + $localunpackdir =~ s/\\/\\\\/g; + $cabfilename =~ s/\\/\\\\/g; + $cabfilename =~ s/\s*$//g; + $systemcall = $expandfile . " " . $cabfilename . " -F:\* " . $localunpackdir . " \> " . $expandlogfile; + } + else + { + $systemcall = $expandfile . " " . $cabfilename . " -F:\* " . $unpackdir . " \> " . $expandlogfile; + } + + my $returnvalue = system($systemcall); + $infoline = "Systemcall: $systemcall\n"; + push( @installer::globals::logfileinfo, $infoline); + + if ($returnvalue) + { + $infoline = "ERROR: Could not execute $systemcall !\n"; + push( @installer::globals::logfileinfo, $infoline); + installer::exiter::exit_program("ERROR: Could not extract cabinet file: $mergemodulehash->{'cabinetfile'} !", "change_file_table"); + } + else + { + $infoline = "Success: Executed $systemcall successfully!\n"; + push( @installer::globals::logfileinfo, $infoline); + } +} + +################################################################################# +# Extracting tables from msi database +################################################################################# + +sub extract_tables_from_pcpfile +{ + my ($fullmsidatabasepath, $workdir, $tablelist) = @_; + + my $msidb = "msidb.exe"; # Has to be in the path + my $infoline = ""; + my $systemcall = ""; + my $returnvalue = ""; + + my $localfullmsidatabasepath = $fullmsidatabasepath; + + # Export of all tables by using "*" + + if ( $^O =~ /cygwin/i ) { + # Copying the msi database locally guarantees the format of the directory. + # Otherwise it is defined in the file of UPDATE_DATABASE_LISTNAME + + my $msifilename = $localfullmsidatabasepath; + installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$msifilename); + my $destdatabasename = $workdir . $installer::globals::separator . $msifilename; + installer::systemactions::copy_one_file($localfullmsidatabasepath, $destdatabasename); + $localfullmsidatabasepath = $destdatabasename; + + chomp( $localfullmsidatabasepath = qx{cygpath -w "$localfullmsidatabasepath"} ); + chomp( $workdir = qx{cygpath -w "$workdir"} ); + + # msidb.exe really wants backslashes. (And double escaping because system() expands the string.) + $localfullmsidatabasepath =~ s/\\/\\\\/g; + $workdir =~ s/\\/\\\\/g; + + # and if there are still slashes, they also need to be double backslash + $localfullmsidatabasepath =~ s/\//\\\\/g; + $workdir =~ s/\//\\\\/g; + } + + $systemcall = $msidb . " -d " . $localfullmsidatabasepath . " -f " . $workdir . " -e $tablelist"; + $returnvalue = system($systemcall); + + $infoline = "Systemcall: $systemcall\n"; + push( @installer::globals::logfileinfo, $infoline); + + if ($returnvalue) + { + $infoline = "ERROR: Could not execute $systemcall !\n"; + push( @installer::globals::logfileinfo, $infoline); + installer::exiter::exit_program("ERROR: Could not exclude tables from pcp file: $localfullmsidatabasepath !", "extract_tables_from_pcpfile"); + } + else + { + $infoline = "Success: Executed $systemcall successfully!\n"; + push( @installer::globals::logfileinfo, $infoline); + } +} + +################################################################################ +# Analyzing the content of Directory.idt +################################################################################# + +sub analyze_directory_file +{ + my ($filecontent) = @_; + + my %table = (); + + for ( my $i = 0; $i <= $#{$filecontent}; $i++ ) + { + if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; } + + if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\s*$/ ) + { + my $dir = $1; + my $parent = $2; + my $name = $3; + + if ( $name =~ /^\s*(.*?)\s*\:\s*(.*?)\s*$/ ) { $name = $2; } + if ( $name =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $name = $2; } + + my %helphash = (); + $helphash{'Directory_Parent'} = $parent; + $helphash{'DefaultDir'} = $name; + $table{$dir} = \%helphash; + } + } + + return \%table; +} + +################################################################################# +# Analyzing the content of Component.idt +################################################################################# + +sub analyze_component_file +{ + my ($filecontent) = @_; + + my %table = (); + + for ( my $i = 0; $i <= $#{$filecontent}; $i++ ) + { + if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; } + + if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ ) + { + my $component = $1; + my $dir = $3; + + $table{$component} = $dir; + } + } + + return \%table; +} + +################################################################################# +# Analyzing the content of File.idt +################################################################################# + +sub analyze_file_file +{ + my ($filecontent) = @_; + + my %table = (); + my %fileorder = (); + my $maxsequence = 0; + + for ( my $i = 0; $i <= $#{$filecontent}; $i++ ) + { + if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; } + + if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ ) + { + my $file = $1; + my $comp = $2; + my $filename = $3; + my $sequence = $8; + + if ( $filename =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $filename = $2; } + + my %helphash = (); + $helphash{'Component'} = $comp; + $helphash{'FileName'} = $filename; + $helphash{'Sequence'} = $sequence; + + $table{$file} = \%helphash; + + $fileorder{$sequence} = $file; + + if ( $sequence > $maxsequence ) { $maxsequence = $sequence; } + } + } + + return (\%table, \%fileorder, $maxsequence); +} + +#################################################################################### +# Recursively creating the directory tree +#################################################################################### + +sub create_directory_tree +{ + my ($parent, $pathcollector, $fulldir, $dirhash) = @_; + + foreach my $dir ( keys %{$dirhash} ) + { + if (( $dirhash->{$dir}->{'Directory_Parent'} eq $parent ) && ( $dirhash->{$dir}->{'DefaultDir'} ne "." )) + { + my $dirname = $dirhash->{$dir}->{'DefaultDir'}; + # Create the directory + my $newdir = $fulldir . $installer::globals::separator . $dirname; + if ( ! -f $newdir ) { mkdir $newdir; } + # Saving in collector + $pathcollector->{$dir} = $newdir; + # Iteration + create_directory_tree($dir, $pathcollector, $newdir, $dirhash); + } + } +} + +#################################################################################### +# Creating the directory tree +#################################################################################### + +sub create_directory_structure +{ + my ($dirhash, $targetdir) = @_; + + my %fullpathhash = (); + + my @startparents = ("TARGETDIR", "INSTALLLOCATION"); + + foreach $dir (@startparents) { create_directory_tree($dir, \%fullpathhash, $targetdir, $dirhash); } + + # Also adding the paths of the startparents + foreach $dir (@startparents) + { + if ( ! exists($fullpathhash{$dir}) ) { $fullpathhash{$dir} = $targetdir; } + } + + return \%fullpathhash; +} + +#################################################################################### +# Copying files into installation set +#################################################################################### + +sub copy_files_into_directory_structure +{ + my ($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash) = @_; + + for ( my $i = 1; $i <= $maxsequence; $i++ ) + { + if ( exists($fileorder->{$i}) ) + { + my $file = $fileorder->{$i}; + if ( ! exists($filehash->{$file}->{'Component'}) ) { installer::exiter::exit_program("ERROR: Did not find component for file: \"$file\".", "copy_files_into_directory_structure"); } + my $component = $filehash->{$file}->{'Component'}; + if ( ! exists($componenthash->{$component}) ) { installer::exiter::exit_program("ERROR: Did not find directory for component: \"$component\".", "copy_files_into_directory_structure"); } + my $dirname = $componenthash->{$component}; + if ( ! exists($fullpathhash->{$dirname}) ) { installer::exiter::exit_program("ERROR: Did not find full directory path for dir: \"$dirname\".", "copy_files_into_directory_structure"); } + my $destdir = $fullpathhash->{$dirname}; + if ( ! exists($filehash->{$file}->{'FileName'}) ) { installer::exiter::exit_program("ERROR: Did not find \"FileName\" for file: \"$file\".", "copy_files_into_directory_structure"); } + my $destfile = $filehash->{$file}->{'FileName'}; + + $destfile = $destdir . $installer::globals::separator . $destfile; + my $sourcefile = $unpackdir . $installer::globals::separator . $file; + + if ( ! -f $sourcefile ) + { + # It is possible, that this was an unpacked file + # Looking in the dirhash, to find the subdirectory in the installation set (the id is $dirname) + # subdir is not recursively analyzed, only one directory. + + my $oldsourcefile = $sourcefile; + my $subdir = ""; + if ( exists($dirhash->{$dirname}->{'DefaultDir'}) ) { $subdir = $dirhash->{$dirname}->{'DefaultDir'} . $installer::globals::separator; } + my $realfilename = $filehash->{$file}->{'FileName'}; + my $localinstalldir = $installdir; + + $localinstalldir =~ s/\\\s*$//; + $localinstalldir =~ s/\/\s*$//; + + $sourcefile = $localinstalldir . $installer::globals::separator . $subdir . $realfilename; + + if ( ! -f $sourcefile ) + { + installer::exiter::exit_program("ERROR: File not found: \"$oldsourcefile\" (or \"$sourcefile\").", "copy_files_into_directory_structure"); + } + } + + my $copyreturn = copy($sourcefile, $destfile); + + if ( ! $copyreturn) # only logging problems + { + my $infoline = "ERROR: Could not copy $sourcefile to $destfile (insufficient disc space for $destfile ?)\n"; + $returnvalue = 0; + push(@installer::globals::logfileinfo, $infoline); + installer::exiter::exit_program($infoline, "copy_files_into_directory_structure"); + } + } + } +} + + +############################################################### +# Setting the time string for the +# Summary Information stream in the +# msi database of the admin installations. +############################################################### + +sub get_sis_time_string +{ + # Syntax: <yyyy/mm/dd hh:mm:ss> + my $second = (localtime())[0]; + my $minute = (localtime())[1]; + my $hour = (localtime())[2]; + my $day = (localtime())[3]; + my $month = (localtime())[4]; + my $year = 1900 + (localtime())[5]; + + $month++; # zero based month + + if ( $second < 10 ) { $second = "0" . $second; } + if ( $minute < 10 ) { $minute = "0" . $minute; } + if ( $hour < 10 ) { $hour = "0" . $hour; } + if ( $day < 10 ) { $day = "0" . $day; } + if ( $month < 10 ) { $month = "0" . $month; } + + my $timestring = $year . "/" . $month . "/" . $day . " " . $hour . ":" . $minute . ":" . $second; + + return $timestring; +} + +############################################################### +# Writing content of administrative installations into +# Summary Information Stream of msi database. +# This is required for example for following +# patch processes using Windows Installer service. +############################################################### + +sub write_sis_info +{ + my ($msidatabase) = @_ ; + + if ( ! -f $msidatabase ) { installer::exiter::exit_program("ERROR: Cannot find file $msidatabase", "write_sis_info"); } + + my $msiinfo = "msiinfo.exe"; # Has to be in the path + my $infoline = ""; + my $systemcall = ""; + my $returnvalue = ""; + + # Required setting for administrative installations: + # -w 4 (source files are unpacked), wordcount + # -s <date of admin installation>, LastPrinted, Syntax: <yyyy/mm/dd hh:mm:ss> + # -l <person_making_admin_installation>, LastSavedBy + + my $wordcount = 4; # Unpacked files + my $lastprinted = get_sis_time_string(); + my $lastsavedby = "Installer"; + + my $localmsidatabase = $msidatabase; + + if( $^O =~ /cygwin/i ) + { + $localmsidatabase = qx{cygpath -w "$localmsidatabase"}; + $localmsidatabase =~ s/\\/\\\\/g; + $localmsidatabase =~ s/\s*$//g; + } + + $systemcall = $msiinfo . " " . "\"" . $localmsidatabase . "\"" . " -w " . $wordcount . " -s " . "\"" . $lastprinted . "\"" . " -l $lastsavedby"; + push(@installer::globals::logfileinfo, $systemcall); + $returnvalue = system($systemcall); + + if ($returnvalue) + { + $infoline = "ERROR: Could not execute $systemcall !\n"; + push(@installer::globals::logfileinfo, $infoline); + installer::exiter::exit_program($infoline, "write_sis_info"); + } +} + +#################################################################################### +# Simulating an administrative installation +#################################################################################### + +sub make_admin_install +{ + my ($databasepath, $targetdir) = @_; + + # Create helper directory + + installer::logger::print_message( "... installing $databasepath in directory $targetdir ...\n" ); + + my $helperdir = $targetdir . $installer::globals::separator . "installhelper"; + installer::systemactions::create_directory($helperdir); + + # Get File.idt, Component.idt and Directory.idt from database + + my $tablelist = "File Directory Component Registry"; + extract_tables_from_pcpfile($databasepath, $helperdir, $tablelist); + + # Unpack all cab files into $helperdir, cab files must be located next to msi database + my $installdir = $databasepath; + + if ( $^O =~ /cygwin/i ) { $installdir =~ s/\\/\//g; } # backslash to slash + + installer::pathanalyzer::get_path_from_fullqualifiedname(\$installdir); + + if ( $^O =~ /cygwin/i ) { $installdir =~ s/\//\\/g; } # slash to backslash + + my $databasefilename = $databasepath; + installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$databasefilename); + + my $cabfiles = installer::systemactions::find_file_with_file_extension("cab", $installdir); + + if ( $#{$cabfiles} < 0 ) { installer::exiter::exit_program("ERROR: Did not find any cab file in directory $installdir", "make_admin_install"); } + + # Set unpackdir + my $unpackdir = $helperdir . $installer::globals::separator . "unpack"; + installer::systemactions::create_directory($unpackdir); + + for ( my $i = 0; $i <= $#{$cabfiles}; $i++ ) + { + my $cabfile = ""; + if ( $^O =~ /cygwin/i ) + { + $cabfile = $installdir . ${$cabfiles}[$i]; + } + else + { + $cabfile = $installdir . $installer::globals::separator . ${$cabfiles}[$i]; + } + unpack_cabinet_file($cabfile, $unpackdir); + } + + # Reading tables + my $filename = $helperdir . $installer::globals::separator . "Directory.idt"; + my $filecontent = installer::files::read_file($filename); + my $dirhash = analyze_directory_file($filecontent); + + $filename = $helperdir . $installer::globals::separator . "Component.idt"; + my $componentfilecontent = installer::files::read_file($filename); + my $componenthash = analyze_component_file($componentfilecontent); + + $filename = $helperdir . $installer::globals::separator . "File.idt"; + $filecontent = installer::files::read_file($filename); + my ( $filehash, $fileorder, $maxsequence ) = analyze_file_file($filecontent); + + # Creating the directory structure + my $fullpathhash = create_directory_structure($dirhash, $targetdir); + + # Copying files + copy_files_into_directory_structure($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash); + + my $msidatabase = $targetdir . $installer::globals::separator . $databasefilename; + installer::systemactions::copy_one_file($databasepath, $msidatabase); + + # Saving info in Summary Information Stream of msi database (required for following patches) + write_sis_info($msidatabase); + + return $msidatabase; +} + +1; |