summaryrefslogtreecommitdiffstats
path: root/svx/source/toolbars
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--svx/source/toolbars/extrusionbar.cxx1319
-rw-r--r--svx/source/toolbars/fontworkbar.cxx589
2 files changed, 1908 insertions, 0 deletions
diff --git a/svx/source/toolbars/extrusionbar.cxx b/svx/source/toolbars/extrusionbar.cxx
new file mode 100644
index 000000000..5ca8a22d1
--- /dev/null
+++ b/svx/source/toolbars/extrusionbar.cxx
@@ -0,0 +1,1319 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed
+ * with this work for additional information regarding copyright
+ * ownership. The ASF licenses this file to you under the Apache
+ * License, Version 2.0 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterType.hpp>
+#include <com/sun/star/drawing/ShadeMode.hpp>
+#include <com/sun/star/drawing/Position3D.hpp>
+#include <com/sun/star/drawing/Direction3D.hpp>
+#include <com/sun/star/drawing/ProjectionMode.hpp>
+#include <svx/svxids.hrc>
+#include <svx/svdundo.hxx>
+#include <sfx2/request.hxx>
+#include <sfx2/objface.hxx>
+#include <sfx2/viewsh.hxx>
+#include <sfx2/bindings.hxx>
+#include <svx/xsflclit.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdview.hxx>
+#include <editeng/colritem.hxx>
+#include <svx/chrtitem.hxx>
+#include <svx/sdasitm.hxx>
+#include <svl/intitem.hxx>
+#include <rtl/math.hxx>
+
+#include <svx/extrusionbar.hxx>
+#include <extrusiondepthdialog.hxx>
+
+using namespace ::svx;
+using namespace ::cppu;
+using namespace ::com::sun::star::beans;
+using namespace ::com::sun::star::drawing;
+using namespace ::com::sun::star::uno;
+
+// Declare the default interface. (The slotmap must not be empty, so
+// we enter something which never occurs here (hopefully).)
+static SfxSlot aExtrusionBarSlots_Impl[] =
+{
+ { 0, SfxGroupId::NONE, SfxSlotMode::NONE, 0, 0, nullptr, nullptr, nullptr, nullptr, nullptr, 0, SfxDisableFlags::NONE, nullptr }
+};
+
+SFX_IMPL_INTERFACE(ExtrusionBar, SfxShell)
+
+void ExtrusionBar::InitInterface_Impl()
+{
+ GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Svx_Extrusion_Bar);
+}
+
+
+ExtrusionBar::ExtrusionBar(SfxViewShell* pViewShell )
+: SfxShell(pViewShell)
+{
+ DBG_ASSERT( pViewShell, "svx::ExtrusionBar::ExtrusionBar(), I need a viewshell!" );
+ if( pViewShell )
+ SetPool(&pViewShell->GetPool());
+
+ SetName(SvxResId(RID_SVX_EXTRUSION_BAR));
+}
+
+ExtrusionBar::~ExtrusionBar()
+{
+ SetRepeatTarget(nullptr);
+}
+
+static void getLightingDirectionDefaults( const Direction3D **pLighting1Defaults, const Direction3D **pLighting2Defaults )
+{
+
+ static const Direction3D aLighting1Defaults[9] =
+ {
+ Direction3D( -50000, -50000, 10000 ),
+ Direction3D( 0, -50000, 10000 ),
+ Direction3D( 50000, -50000, 10000 ),
+ Direction3D( -50000, 0, 10000 ),
+ Direction3D( 0, 0, 10000 ),
+ Direction3D( 50000, 0, 10000 ),
+ Direction3D( -50000, 50000, 10000 ),
+ Direction3D( 0, 50000, 10000 ),
+ Direction3D( 50000, 50000, 10000 )
+ };
+
+ static const Direction3D aLighting2Defaults[9] =
+ {
+ Direction3D( 50000,0, 10000 ),
+ Direction3D( 0, 50000, 10000 ),
+ Direction3D( -50000, 0, 10000 ),
+ Direction3D( 50000, 0, 10000 ),
+ Direction3D( 0, 0, 10000 ),
+ Direction3D( -50000, 0, 10000 ),
+ Direction3D( 50000, 0, 10000 ),
+ Direction3D( 0, -50000, 10000 ),
+ Direction3D( -50000, 0, 10000 )
+ };
+
+ *pLighting1Defaults = aLighting1Defaults;
+ *pLighting2Defaults = aLighting2Defaults;
+};
+
+static void impl_execute( SfxRequest const & rReq, SdrCustomShapeGeometryItem& rGeometryItem, SdrObject* pObj )
+{
+ static const char sExtrusion[] = "Extrusion";
+ static const char sRotateAngle[] = "RotateAngle";
+
+ sal_uInt16 nSID = rReq.GetSlot();
+ switch( nSID )
+ {
+ case SID_EXTRUSION_TOGGLE:
+ {
+ css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+
+ if( pAny )
+ {
+ bool bOn(false);
+ (*pAny) >>= bOn;
+ bOn = !bOn;
+ (*pAny) <<= bOn;
+ }
+ else
+ {
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = sExtrusion;
+ aPropValue.Value <<= true;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+
+ case SID_EXTRUSION_TILT_DOWN:
+ case SID_EXTRUSION_TILT_UP:
+ case SID_EXTRUSION_TILT_LEFT:
+ case SID_EXTRUSION_TILT_RIGHT:
+ {
+ bool bHorizontal = ( nSID == SID_EXTRUSION_TILT_DOWN ) || ( nSID == SID_EXTRUSION_TILT_UP );
+ sal_Int32 nDiff = ( nSID == SID_EXTRUSION_TILT_LEFT ) || ( nSID == SID_EXTRUSION_TILT_UP ) ? 5 : -5;
+ EnhancedCustomShapeParameterPair aRotateAnglePropPair;
+ double fX = 0.0;
+ double fY = 0.0;
+ aRotateAnglePropPair.First.Value <<= fX;
+ aRotateAnglePropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aRotateAnglePropPair.Second.Value <<= fY;
+ aRotateAnglePropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+ css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sRotateAngle );
+ if( pAny && ( *pAny >>= aRotateAnglePropPair ) )
+ {
+ aRotateAnglePropPair.First.Value >>= fX;
+ aRotateAnglePropPair.Second.Value >>= fY;
+ }
+ if ( bHorizontal )
+ fX += nDiff;
+ else
+ fY += nDiff;
+ aRotateAnglePropPair.First.Value <<= fX;
+ aRotateAnglePropPair.Second.Value <<= fY;
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = sRotateAngle;
+ aPropValue.Value <<= aRotateAnglePropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ break;
+
+ case SID_EXTRUSION_DIRECTION:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DIRECTION ) == SfxItemState::SET )
+ {
+ sal_Int32 nSkew = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_DIRECTION)->GetValue();
+
+ Position3D aViewPoint( 3472, -3472, 25000 );
+ double fOriginX = 0.50;
+ double fOriginY = -0.50;
+ double fSkewAngle = nSkew;
+ double fSkew = 50.0;
+
+ switch( nSkew )
+ {
+ case 135:
+ aViewPoint.PositionY = 3472;
+ fOriginY = 0.50;
+ break;
+ case 90:
+ aViewPoint.PositionX = 0;
+ aViewPoint.PositionY = 3472;
+ fOriginX = 0;
+ fOriginY = -0.50;
+ break;
+ case 45:
+ aViewPoint.PositionX = -3472;
+ aViewPoint.PositionY = 3472;
+ fOriginX = -0.50;
+ fOriginY = 0.50;
+ break;
+ case 180:
+ aViewPoint.PositionY = 0;
+ fOriginY = 0;
+ break;
+ case 0:
+ aViewPoint.PositionX = 0;
+ aViewPoint.PositionY = 0;
+ fOriginX = 0;
+ fOriginY = 0;
+ fSkew = 0.0;
+ break;
+ case -360:
+ aViewPoint.PositionX = -3472;
+ aViewPoint.PositionY = 0;
+ fOriginX = -0.50;
+ fOriginY = 0;
+ break;
+ case -90:
+ aViewPoint.PositionX = 0;
+ fOriginX = 0;
+ break;
+ case -45:
+ aViewPoint.PositionX = -3472;
+ fOriginX = -0.50;
+ break;
+ }
+
+ css::beans::PropertyValue aPropValue;
+
+ aPropValue.Name = "ViewPoint";
+ aPropValue.Value <<= aViewPoint;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+
+ EnhancedCustomShapeParameterPair aOriginPropPair;
+ aOriginPropPair.First.Value <<= fOriginX;
+ aOriginPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aOriginPropPair.Second.Value <<= fOriginY;
+ aOriginPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aPropValue.Name = "Origin";
+ aPropValue.Value <<= aOriginPropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ EnhancedCustomShapeParameterPair aSkewPropPair;
+ aSkewPropPair.First.Value <<= fSkew;
+ aSkewPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aSkewPropPair.Second.Value <<= fSkewAngle;
+ aSkewPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aPropValue.Name = "Skew";
+ aPropValue.Value <<= aSkewPropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_PROJECTION:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_PROJECTION ) == SfxItemState::SET )
+ {
+ sal_Int32 nProjection = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_PROJECTION)->GetValue();
+ ProjectionMode eProjectionMode = nProjection == 1 ? ProjectionMode_PARALLEL : ProjectionMode_PERSPECTIVE;
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "ProjectionMode";
+ aPropValue.Value <<= eProjectionMode;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_DEPTH:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET)
+ {
+ double fDepth = rReq.GetArgs()->GetItem<SvxDoubleItem>(SID_EXTRUSION_DEPTH)->GetValue();
+ EnhancedCustomShapeParameterPair aDepthPropPair;
+ aDepthPropPair.First.Value <<= fDepth;
+ aDepthPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aDepthPropPair.Second.Value <<= 0.0; // fraction
+ aDepthPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "Depth";
+ aPropValue.Value <<= aDepthPropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_3D_COLOR:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_3D_COLOR ) == SfxItemState::SET)
+ {
+ Color aColor( static_cast<const SvxColorItem&>(rReq.GetArgs()->Get(SID_EXTRUSION_3D_COLOR)).GetValue() );
+
+ const bool bAuto = aColor == COL_AUTO;
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "Color";
+ aPropValue.Value <<= !bAuto;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ if( bAuto )
+ {
+ pObj->ClearMergedItem( XATTR_SECONDARYFILLCOLOR );
+ }
+ else
+ {
+ pObj->SetMergedItem( XSecondaryFillColorItem( "", aColor ) );
+ }
+ pObj->BroadcastObjectChange();
+ }
+ }
+ break;
+ case SID_EXTRUSION_SURFACE:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_SURFACE ) == SfxItemState::SET)
+ {
+ sal_Int32 nSurface = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_SURFACE)->GetValue();
+
+ ShadeMode eShadeMode( ShadeMode_FLAT );
+ bool bMetal = false;
+ double fSpecularity = 0;
+ double fDiffusion = 0;
+
+ switch( nSurface )
+ {
+ case 0: // wireframe
+ eShadeMode = ShadeMode_DRAFT;
+ break;
+ case 1: // matte
+ break;
+ case 2: // plastic
+ fSpecularity = 122.0;
+ break;
+ case 3: // metal
+ bMetal = true;
+ fSpecularity = 122.0;
+ fDiffusion = 122.0;
+ break;
+ }
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "ShadeMode";
+ aPropValue.Value <<= eShadeMode;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "Metal";
+ aPropValue.Value <<= bMetal;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "Specularity";
+ aPropValue.Value <<= fSpecularity;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "Diffusion";
+ aPropValue.Value <<= fDiffusion;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_LIGHTING_INTENSITY:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_INTENSITY ) == SfxItemState::SET)
+ {
+ sal_Int32 nLevel = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_LIGHTING_INTENSITY)->GetValue();
+
+ double fBrightness;
+ bool bHarsh2 = false;
+ double fLevel1;
+ double fLevel2;
+
+ switch( nLevel )
+ {
+ case 0: // bright
+ fBrightness = 34.0;
+ bHarsh2 = false;
+ fLevel1 = 66.0;
+ fLevel2 = 66.0;
+ break;
+ case 1: // normal
+ fBrightness = 15.0;
+ bHarsh2 = false;
+ fLevel1 = 67.0;
+ fLevel2 = 37.0;
+ break;
+ case 2: // dim
+ fBrightness = 6.0;
+ bHarsh2 = true;
+ fLevel1 = 79.0;
+ fLevel2 = 21.0;
+ break;
+ }
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "Brightness";
+ aPropValue.Value <<= fBrightness;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "LightFace";
+ aPropValue.Value <<= true;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "FirstLightHarsh";
+ aPropValue.Value <<= true;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "SecondLightHarsh";
+ aPropValue.Value <<= bHarsh2;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "FirstLightLevel";
+ aPropValue.Value <<= fLevel1;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "SecondLightLevel";
+ aPropValue.Value <<= fLevel2;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_LIGHTING_DIRECTION:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_DIRECTION ) == SfxItemState::SET)
+ {
+ sal_Int32 nDirection = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_LIGHTING_DIRECTION)->GetValue();
+
+ if((nDirection >= 0) && (nDirection < 9))
+ {
+ const Direction3D * pLighting1Defaults;
+ const Direction3D * pLighting2Defaults;
+
+ getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "FirstLightDirection";
+ aPropValue.Value <<= pLighting1Defaults[nDirection];
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "SecondLightDirection";
+ aPropValue.Value <<= pLighting2Defaults[nDirection];
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ }
+ break;
+
+ }
+}
+
+void ExtrusionBar::execute( SdrView* pSdrView, SfxRequest const & rReq, SfxBindings& rBindings )
+{
+ sal_uInt16 nSID = rReq.GetSlot();
+ const char* pStrResId = nullptr;
+
+ const bool bUndo = pSdrView && pSdrView->IsUndoEnabled();
+
+ switch( nSID )
+ {
+ case SID_EXTRUSION_TOGGLE:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ON_OFF;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_DOWN:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_DOWN;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_UP:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_UP;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_LEFT:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_LEFT;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_RIGHT:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_RIGHT;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_DIRECTION:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ORIENTATION;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_PROJECTION:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_PROJECTION;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_DEPTH:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_DEPTH;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_3D_COLOR:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_COLOR;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_SURFACE:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_SURFACE;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_LIGHTING_INTENSITY:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_BRIGHTNESS;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_LIGHTING_DIRECTION:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_LIGHTING;
+
+ if (pSdrView)
+ {
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ if( bUndo )
+ {
+ OUString aStr( SvxResId( pStrResId ) );
+ pSdrView->BegUndo( aStr );
+ pSdrView->AddUndo( pSdrView->GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pObj ) );
+ }
+ SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ impl_execute( rReq, aGeometryItem, pObj );
+ pObj->SetMergedItem( aGeometryItem );
+ pObj->BroadcastObjectChange();
+ if( bUndo )
+ pSdrView->EndUndo();
+
+ // simulate a context change:
+ // force SelectionHasChanged() being called
+ // so that extrusion bar will be visible/hidden
+ pSdrView->MarkListHasChanged();
+ }
+ }
+ }
+ }
+ break;
+
+ case SID_EXTRUSION_DEPTH_DIALOG:
+ if( rReq.GetArgs() &&
+ (rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET) &&
+ (rReq.GetArgs()->GetItemState( SID_ATTR_METRIC ) == SfxItemState::SET))
+ {
+ double fDepth = rReq.GetArgs()->GetItem<SvxDoubleItem>(SID_EXTRUSION_DEPTH)->GetValue();
+ FieldUnit eUnit = static_cast<FieldUnit>(rReq.GetArgs()->GetItem<SfxUInt16Item>(SID_ATTR_METRIC)->GetValue());
+
+ ExtrusionDepthDialog aDlg(rReq.GetFrameWeld(), fDepth, eUnit);
+ sal_uInt16 nRet = aDlg.run();
+ if (nRet == RET_OK)
+ {
+ fDepth = aDlg.getDepth();
+
+ SvxDoubleItem aItem( fDepth, SID_EXTRUSION_DEPTH );
+ SfxPoolItem* aItems[] = { &aItem, nullptr };
+ rBindings.Execute( SID_EXTRUSION_DEPTH, const_cast<const SfxPoolItem**>(aItems) );
+ }
+ }
+ break;
+ }
+
+ if( nSID == SID_EXTRUSION_TOGGLE )
+ {
+ static const sal_uInt16 SidArray[] = {
+ SID_EXTRUSION_TILT_DOWN,
+ SID_EXTRUSION_TILT_UP,
+ SID_EXTRUSION_TILT_LEFT,
+ SID_EXTRUSION_TILT_RIGHT,
+ SID_EXTRUSION_DEPTH_FLOATER,
+ SID_EXTRUSION_DIRECTION_FLOATER,
+ SID_EXTRUSION_LIGHTING_FLOATER,
+ SID_EXTRUSION_SURFACE_FLOATER,
+ SID_EXTRUSION_3D_COLOR,
+ SID_EXTRUSION_DEPTH,
+ SID_EXTRUSION_DIRECTION,
+ SID_EXTRUSION_PROJECTION,
+ SID_EXTRUSION_LIGHTING_DIRECTION,
+ SID_EXTRUSION_LIGHTING_INTENSITY,
+ SID_EXTRUSION_SURFACE,
+ 0 };
+
+ rBindings.Invalidate( SidArray );
+ }
+}
+
+static void getExtrusionDirectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static const char sExtrusion[] = "Extrusion";
+
+ const css::uno::Any* pAny;
+
+ double fFinalSkewAngle = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ bool bParallel = true;
+ Position3D aViewPoint( 3472, -3472, 25000 );
+ double fSkewAngle = -135;
+
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ProjectionMode" );
+ sal_Int16 nProjectionMode = sal_Int16();
+ if( pAny && ( *pAny >>= nProjectionMode ) )
+ bParallel = static_cast<ProjectionMode>(nProjectionMode) == ProjectionMode_PARALLEL;
+
+ if( bParallel )
+ {
+ double fSkew = 50.0;
+ EnhancedCustomShapeParameterPair aSkewPropPair;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Skew" );
+ if( pAny && ( *pAny >>= aSkewPropPair ) )
+ {
+ aSkewPropPair.First.Value >>= fSkew;
+ aSkewPropPair.Second.Value >>= fSkewAngle;
+ }
+ if ( fSkew == 0.0 )
+ fSkewAngle = 0.0;
+ else if ( fSkewAngle == 0.0 )
+ fSkewAngle = -360.0;
+ }
+ else
+ {
+ double fOriginX = 0.50;
+ double fOriginY = -0.50;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ViewPoint" );
+ if( pAny )
+ *pAny >>= aViewPoint;
+
+ EnhancedCustomShapeParameterPair aOriginPropPair;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Origin" );
+ if( pAny && ( *pAny >>= aOriginPropPair ) )
+ {
+ aOriginPropPair.First.Value >>= fOriginX;
+ aOriginPropPair.Second.Value >>= fOriginY;
+ }
+ fSkewAngle = -1;
+ const double e = 0.0001;
+ if( aViewPoint.PositionX > e )
+ {
+ if( aViewPoint.PositionY > e )
+ {
+ if( (fOriginX > e ) && ( fOriginY > e ) )
+ fSkewAngle = 135.0;
+ }
+ else if( aViewPoint.PositionY < -e )
+ {
+ if( ( fOriginX > e ) && ( fOriginY < -e ) )
+ fSkewAngle = -135.0;
+ }
+ else
+ {
+ if( ( fOriginX > e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+ fSkewAngle = 180.0;
+ }
+ }
+ else if( aViewPoint.PositionX < -e )
+ {
+ if( aViewPoint.PositionY < -e )
+ {
+ if( ( fOriginX < -e ) && ( fOriginY < -e ) )
+ fSkewAngle = -45.0;
+ }
+ else if( aViewPoint.PositionY > e )
+ {
+ if( ( fOriginX < -e ) && ( fOriginY > e ) )
+ fSkewAngle = 45.0;
+ }
+ else
+ {
+ if( ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+ fSkewAngle = -360.0;
+ }
+ }
+ else
+ {
+ if( aViewPoint.PositionY < -e )
+ {
+ if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY < -e ) )
+ fSkewAngle = -90.0;
+ }
+ else if( aViewPoint.PositionY > e )
+ {
+ if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > e ) )
+ fSkewAngle = 90.0;
+ }
+ else
+ {
+ if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+ fSkewAngle = 0.0;
+ }
+ }
+ }
+
+ if( rtl::math::approxEqual(fFinalSkewAngle, -1.0) )
+ {
+ fFinalSkewAngle = fSkewAngle;
+ }
+ else if( !rtl::math::approxEqual(fSkewAngle, fFinalSkewAngle) )
+ {
+ fFinalSkewAngle = -1.0;
+ }
+
+ if( rtl::math::approxEqual(fFinalSkewAngle, -1.0) )
+ break;
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_DIRECTION, static_cast<sal_Int32>(fFinalSkewAngle) ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_DIRECTION );
+}
+
+static void getExtrusionProjectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static const char sExtrusion[] = "Extrusion";
+
+ const css::uno::Any* pAny;
+
+ sal_Int32 nFinalProjection = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ bool bParallel = true;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ProjectionMode" );
+ ProjectionMode eProjectionMode;
+ if( pAny && ( *pAny >>= eProjectionMode ) )
+ bParallel = eProjectionMode == ProjectionMode_PARALLEL;
+
+ if( nFinalProjection == -1 )
+ {
+ nFinalProjection = bParallel ? 1 : 0;
+ }
+ else if( nFinalProjection != (bParallel ? 1 : 0) )
+ {
+ nFinalProjection = -1;
+ break;
+ }
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_PROJECTION, nFinalProjection ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_PROJECTION );
+}
+
+static void getExtrusionSurfaceState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static const char sExtrusion[] = "Extrusion";
+
+ const css::uno::Any* pAny;
+
+ sal_Int32 nFinalSurface = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ sal_Int32 nSurface = 0; // wire frame
+
+ ShadeMode eShadeMode( ShadeMode_FLAT );
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "ShadeMode" );
+ if( pAny )
+ *pAny >>= eShadeMode;
+
+ if( eShadeMode == ShadeMode_FLAT )
+ {
+ bool bMetal = false;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Metal" );
+ if( pAny )
+ *pAny >>= bMetal;
+
+ if( bMetal )
+ {
+ nSurface = 3; // metal
+ }
+ else
+ {
+ double fSpecularity = 0;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Specularity" );
+ if( pAny )
+ *pAny >>= fSpecularity;
+
+ const double e = 0.0001;
+ if( (fSpecularity > -e) && (fSpecularity < e) )
+ {
+ nSurface = 1; // matte
+ }
+ else
+ {
+ nSurface = 2; // plastic
+ }
+ }
+ }
+
+ if( nFinalSurface == -1 )
+ {
+ nFinalSurface = nSurface;
+ }
+ else if( nFinalSurface != nSurface )
+ {
+ nFinalSurface = -1;
+ break;
+ }
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_SURFACE, nFinalSurface ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_SURFACE );
+}
+
+static void getExtrusionDepthState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static const char sExtrusion[] = "Extrusion";
+
+ const css::uno::Any* pAny;
+
+ double fFinalDepth = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ double fDepth = 1270.0;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Depth" );
+ if( pAny )
+ {
+ EnhancedCustomShapeParameterPair aDepthPropPair;
+ if ( *pAny >>= aDepthPropPair )
+ aDepthPropPair.First.Value >>= fDepth;
+ }
+
+ if( fFinalDepth == -1 )
+ {
+ fFinalDepth = fDepth;
+ }
+ else if( !rtl::math::approxEqual(fFinalDepth, fDepth) )
+ {
+ fFinalDepth = -1;
+ break;
+ }
+ }
+ }
+
+ if( pSdrView->GetModel() )
+ {
+ FieldUnit eUnit = pSdrView->GetModel()->GetUIUnit();
+ rSet.Put( SfxUInt16Item( SID_ATTR_METRIC, static_cast<sal_uInt16>(eUnit) ) );
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SvxDoubleItem( fFinalDepth, SID_EXTRUSION_DEPTH ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_DEPTH );
+}
+
+static bool compare_direction( const Direction3D& d1, const Direction3D& d2 )
+{
+ if( ((d1.DirectionX < 0) && (d2.DirectionX < 0)) || ((d1.DirectionX == 0) && (d2.DirectionX == 0)) || ((d1.DirectionX > 0) && (d2.DirectionX > 0)) )
+ {
+ if( ((d1.DirectionY < 0) && (d2.DirectionY < 0)) || ((d1.DirectionY == 0) && (d2.DirectionY == 0)) || ((d1.DirectionY > 0) && (d2.DirectionY > 0)) )
+ {
+ if( ((d1.DirectionZ < 0) && (d2.DirectionZ < 0)) || ((d1.DirectionZ == 0) && (d2.DirectionZ == 0)) || ((d1.DirectionZ > 0) && (d2.DirectionZ > 0)) )
+ {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+static void getExtrusionLightingDirectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static const char sExtrusion[] = "Extrusion";
+
+ const Direction3D * pLighting1Defaults;
+ const Direction3D * pLighting2Defaults;
+
+ getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
+
+ const css::uno::Any* pAny;
+
+ int nFinalDirection = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ Direction3D aFirstLightDirection( 50000, 0, 10000 );
+ Direction3D aSecondLightDirection( -50000, 0, 10000 );
+
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "FirstLightDirection" );
+ if( pAny )
+ *pAny >>= aFirstLightDirection;
+
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "SecondLightDirection" );
+ if( pAny )
+ *pAny >>= aSecondLightDirection;
+
+ int nDirection = -1;
+
+ int j;
+ for( j = 0; j < 9; j++ )
+ {
+ if( compare_direction( aFirstLightDirection, pLighting1Defaults[j] ) &&
+ compare_direction( aSecondLightDirection, pLighting2Defaults[j] ))
+ {
+ nDirection = j;
+ break;
+ }
+ }
+
+ if( nFinalDirection == -1 )
+ {
+ nFinalDirection = nDirection;
+ }
+ else if( nDirection != nFinalDirection )
+ {
+ nFinalDirection = -1;
+ }
+
+ if( nFinalDirection == -1 )
+ break;
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_DIRECTION, static_cast<sal_Int32>(nFinalDirection) ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_LIGHTING_DIRECTION );
+}
+
+static void getExtrusionLightingIntensityState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static const char sExtrusion[] = "Extrusion";
+
+ const css::uno::Any* pAny;
+
+ int nFinalLevel = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ double fBrightness = 22178.0 / 655.36;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Brightness" );
+ if( pAny )
+ *pAny >>= fBrightness;
+
+ int nLevel;
+ if( fBrightness >= 30.0 )
+ {
+ nLevel = 0; // Bright
+ }
+ else if( fBrightness >= 10.0 )
+ {
+ nLevel = 1; // Normal;
+ }
+ else
+ {
+ nLevel = 2; // Dim
+ }
+
+ if( nFinalLevel == -1 )
+ {
+ nFinalLevel = nLevel;
+ }
+ else if( nFinalLevel != nLevel )
+ {
+ nFinalLevel = -1;
+ break;
+ }
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_INTENSITY, nFinalLevel ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_LIGHTING_INTENSITY );
+}
+
+static void getExtrusionColorState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static const char sExtrusion[] = "Extrusion";
+
+ const css::uno::Any* pAny;
+
+ bool bInit = false;
+ bool bAmbigius = false;
+ Color aFinalColor;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ Color aColor;
+
+ bool bUseColor = false;
+ pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, "Color" );
+ if( pAny )
+ *pAny >>= bUseColor;
+
+ if( bUseColor )
+ {
+ const XSecondaryFillColorItem& rItem = pObj->GetMergedItem( XATTR_SECONDARYFILLCOLOR );
+ aColor = rItem.GetColorValue();
+ }
+ else
+ {
+ aColor = COL_AUTO;
+ }
+
+ if( !bInit )
+ {
+ aFinalColor = aColor;
+ bInit = true;
+ }
+ else if( aFinalColor != aColor )
+ {
+ bAmbigius = true;
+ break;
+ }
+ }
+ }
+
+ if( bAmbigius )
+ aFinalColor = COL_AUTO;
+
+ if( bHasCustomShape )
+ rSet.Put( SvxColorItem( aFinalColor, SID_EXTRUSION_3D_COLOR ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
+}
+
+namespace svx {
+bool checkForSelectedCustomShapes( SdrView const * pSdrView, bool bOnlyExtruded )
+{
+ static const char sExtrusion[] = "Extrusion";
+
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+ bool bFound = false;
+
+ for(size_t i=0;(i<nCount) && !bFound ; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ if( bOnlyExtruded )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ const Any* pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny )
+ *pAny >>= bFound;
+ }
+ else
+ {
+ bFound = true;
+ }
+ }
+ }
+
+ return bFound;
+}
+}
+
+void ExtrusionBar::getState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ if (rSet.GetItemState(SID_EXTRUSION_DIRECTION) != SfxItemState::UNKNOWN)
+ {
+ getExtrusionDirectionState( pSdrView, rSet );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_PROJECTION) != SfxItemState::UNKNOWN)
+ {
+ getExtrusionProjectionState( pSdrView, rSet );
+ }
+ const bool bOnlyExtrudedCustomShapes =
+ checkForSelectedCustomShapes( pSdrView, true );
+ if (rSet.GetItemState(SID_EXTRUSION_TILT_DOWN) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_TILT_DOWN) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_TILT_UP) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_TILT_UP );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_TILT_LEFT) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_TILT_LEFT );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_TILT_RIGHT) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_TILT_RIGHT );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_3D_COLOR) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_DEPTH_FLOATER) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_DEPTH_FLOATER );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_DIRECTION_FLOATER) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_DIRECTION_FLOATER );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_FLOATER) != SfxItemState::UNKNOWN)
+ {
+ if (! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_LIGHTING_FLOATER );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_SURFACE_FLOATER) != SfxItemState::UNKNOWN)
+ {
+ if(! bOnlyExtrudedCustomShapes)
+ rSet.DisableItem( SID_EXTRUSION_SURFACE_FLOATER );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_TOGGLE) != SfxItemState::UNKNOWN)
+ {
+ if( !checkForSelectedCustomShapes( pSdrView, false ) )
+ rSet.DisableItem( SID_EXTRUSION_TOGGLE );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_DEPTH) != SfxItemState::UNKNOWN)
+ {
+ getExtrusionDepthState( pSdrView, rSet );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_SURFACE) != SfxItemState::UNKNOWN)
+ {
+ getExtrusionSurfaceState( pSdrView, rSet );
+ }
+ if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_INTENSITY) != SfxItemState::UNKNOWN)
+ {
+ getExtrusionLightingIntensityState( pSdrView, rSet );
+ }
+
+ if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_DIRECTION) != SfxItemState::UNKNOWN)
+ {
+ getExtrusionLightingDirectionState( pSdrView, rSet );
+ }
+
+ if (rSet.GetItemState(SID_EXTRUSION_3D_COLOR) != SfxItemState::UNKNOWN)
+ {
+ getExtrusionColorState( pSdrView, rSet );
+ }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/toolbars/fontworkbar.cxx b/svx/source/toolbars/fontworkbar.cxx
new file mode 100644
index 000000000..ae46b755b
--- /dev/null
+++ b/svx/source/toolbars/fontworkbar.cxx
@@ -0,0 +1,589 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed
+ * with this work for additional information regarding copyright
+ * ownership. The ASF licenses this file to you under the Apache
+ * License, Version 2.0 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <svx/svdundo.hxx>
+#include <sfx2/request.hxx>
+#include <sfx2/objface.hxx>
+#include <sfx2/viewsh.hxx>
+#include <svx/unoapi.hxx>
+#include <com/sun/star/drawing/XShape.hpp>
+#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp>
+#include <sal/log.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdpage.hxx>
+#include <svx/svdview.hxx>
+#include <svx/sdasitm.hxx>
+#include <svx/gallery.hxx>
+#include <svx/fmmodel.hxx>
+#include <svx/sdtfsitm.hxx>
+#include <svl/itempool.hxx>
+#include <svl/stritem.hxx>
+#include <sfx2/bindings.hxx>
+#include <editeng/eeitem.hxx>
+#include <editeng/charscaleitem.hxx>
+#include <editeng/kernitem.hxx>
+
+#include <svx/svxids.hrc>
+#include <svx/fontworkbar.hxx>
+#include <svx/fontworkgallery.hxx>
+
+
+using namespace ::svx;
+using namespace ::cppu;
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::beans;
+using namespace ::com::sun::star::uno;
+
+static void SetAlignmentState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ sal_Int32 nAlignment = -1;
+ for( size_t i = 0; i < nCount; ++i )
+ {
+ SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ sal_Int32 nOldAlignment = nAlignment;
+ const SdrTextHorzAdjustItem& rTextHorzAdjustItem = pObj->GetMergedItem( SDRATTR_TEXT_HORZADJUST );
+ const SdrTextFitToSizeTypeItem& rTextFitToSizeTypeItem = pObj->GetMergedItem( SDRATTR_TEXT_FITTOSIZE );
+ switch ( rTextHorzAdjustItem.GetValue() )
+ {
+ case SDRTEXTHORZADJUST_LEFT : nAlignment = 0; break;
+ case SDRTEXTHORZADJUST_CENTER : nAlignment = 1; break;
+ case SDRTEXTHORZADJUST_RIGHT : nAlignment = 2; break;
+ case SDRTEXTHORZADJUST_BLOCK :
+ {
+ auto const fit(rTextFitToSizeTypeItem.GetValue());
+ if (fit == drawing::TextFitToSizeType_NONE)
+ {
+ nAlignment = 3;
+ }
+ else if (fit == drawing::TextFitToSizeType_ALLLINES ||
+ fit == drawing::TextFitToSizeType_PROPORTIONAL)
+ {
+ nAlignment = 4;
+ }
+ }
+ }
+ if ( ( nOldAlignment != -1 ) && ( nOldAlignment != nAlignment ) )
+ {
+ nAlignment = -1;
+ break;
+ }
+ }
+ }
+ rSet.Put( SfxInt32Item( SID_FONTWORK_ALIGNMENT, nAlignment ) );
+}
+
+static void SetCharacterSpacingState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ sal_Int32 nCharacterSpacing = -1;
+ for( size_t i = 0; i < nCount; ++i )
+ {
+ SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ sal_Int32 nOldCharacterSpacing = nCharacterSpacing;
+ const SvxCharScaleWidthItem& rCharScaleWidthItem = pObj->GetMergedItem( EE_CHAR_FONTWIDTH );
+ nCharacterSpacing = rCharScaleWidthItem.GetValue();
+ if ( ( nOldCharacterSpacing != -1 ) && ( nOldCharacterSpacing != nCharacterSpacing ) )
+ {
+ nCharacterSpacing = -1;
+ break;
+ }
+ }
+ }
+ rSet.Put( SfxInt32Item( SID_FONTWORK_CHARACTER_SPACING, nCharacterSpacing ) );
+}
+
+
+static void SetKernCharacterPairsState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ bool bChecked = false;
+ for( size_t i = 0; i < nCount; ++i )
+ {
+ SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SvxKerningItem& rKerningItem = pObj->GetMergedItem( EE_CHAR_KERNING );
+ if ( rKerningItem.GetValue() )
+ bChecked = true;
+ }
+ }
+ rSet.Put( SfxBoolItem( SID_FONTWORK_KERN_CHARACTER_PAIRS, bChecked ) );
+}
+
+static void SetFontWorkShapeTypeState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ OUString aFontWorkShapeType;
+
+ for( size_t i = 0; i < nCount; ++i )
+ {
+ SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ const Any* pAny = aGeometryItem.GetPropertyValueByName( "Type" );
+ if( pAny )
+ {
+ OUString aType;
+ if ( *pAny >>= aType )
+ {
+ if ( !aFontWorkShapeType.isEmpty() )
+ {
+ if ( aFontWorkShapeType != aType ) // different FontWorkShapeTypes selected ?
+ {
+ aFontWorkShapeType.clear();
+ break;
+ }
+ }
+ aFontWorkShapeType = aType;
+ }
+ }
+ }
+ }
+ rSet.Put( SfxStringItem( SID_FONTWORK_SHAPE_TYPE, aFontWorkShapeType ) );
+}
+
+// Declare the default interface. (The slotmap must not be empty, so
+// we enter something which never occurs here (hopefully).)
+static SfxSlot aFontworkBarSlots_Impl[] =
+{
+ { 0, SfxGroupId::NONE, SfxSlotMode::NONE, 0, 0, nullptr, nullptr, nullptr, nullptr, nullptr, 0, SfxDisableFlags::NONE, nullptr }
+};
+
+SFX_IMPL_INTERFACE(FontworkBar, SfxShell)
+
+void FontworkBar::InitInterface_Impl()
+{
+ GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Svx_Fontwork_Bar);
+}
+
+
+FontworkBar::FontworkBar(SfxViewShell* pViewShell )
+: SfxShell(pViewShell)
+{
+ DBG_ASSERT( pViewShell, "svx::FontworkBar::FontworkBar(), I need a viewshell!" );
+ if( pViewShell )
+ SetPool(&pViewShell->GetPool());
+
+ SetName( SvxResId( RID_SVX_FONTWORK_BAR ));
+}
+
+FontworkBar::~FontworkBar()
+{
+ SetRepeatTarget(nullptr);
+}
+
+namespace svx {
+bool checkForSelectedFontWork( SdrView const * pSdrView, sal_uInt32& nCheckStatus )
+{
+ if ( nCheckStatus & 2 )
+ return ( nCheckStatus & 1 ) != 0;
+
+ static const char sTextPath[] = "TextPath";
+
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+ bool bFound = false;
+ for(size_t i=0; (i<nCount) && !bFound ; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ const Any* pAny = aGeometryItem.GetPropertyValueByName( sTextPath, sTextPath );
+ if( pAny )
+ *pAny >>= bFound;
+ }
+ }
+ if ( bFound )
+ nCheckStatus |= 1;
+ nCheckStatus |= 2;
+ return bFound;
+}
+}
+
+static void impl_execute( SfxRequest const & rReq, SdrCustomShapeGeometryItem& rGeometryItem, SdrObject* pObj )
+{
+ sal_uInt16 nSID = rReq.GetSlot();
+ switch( nSID )
+ {
+ case SID_FONTWORK_SAME_LETTER_HEIGHTS:
+ {
+ css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( "TextPath", "SameLetterHeights" );
+ if( pAny )
+ {
+ bool bOn = false;
+ (*pAny) >>= bOn;
+ bOn = !bOn;
+ (*pAny) <<= bOn;
+ }
+ }
+ break;
+
+ case SID_FONTWORK_ALIGNMENT:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_FONTWORK_ALIGNMENT ) == SfxItemState::SET )
+ {
+ sal_Int32 nValue = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_FONTWORK_ALIGNMENT)->GetValue();
+ if ( ( nValue >= 0 ) && ( nValue < 5 ) )
+ {
+ drawing::TextFitToSizeType eFTS = drawing::TextFitToSizeType_NONE;
+ SdrTextHorzAdjust eHorzAdjust;
+ switch ( nValue )
+ {
+ case 4 : eFTS = drawing::TextFitToSizeType_ALLLINES; [[fallthrough]];
+ case 3 : eHorzAdjust = SDRTEXTHORZADJUST_BLOCK; break;
+ default: eHorzAdjust = SDRTEXTHORZADJUST_LEFT; break;
+ case 1 : eHorzAdjust = SDRTEXTHORZADJUST_CENTER; break;
+ case 2 : eHorzAdjust = SDRTEXTHORZADJUST_RIGHT; break;
+ }
+ pObj->SetMergedItem( SdrTextHorzAdjustItem( eHorzAdjust ) );
+ pObj->SetMergedItem( SdrTextFitToSizeTypeItem( eFTS ) );
+ pObj->BroadcastObjectChange();
+ }
+ }
+ }
+ break;
+
+ case SID_FONTWORK_CHARACTER_SPACING:
+ {
+ if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_CHARACTER_SPACING ) == SfxItemState::SET ) )
+ {
+ sal_Int32 nCharSpacing = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_FONTWORK_CHARACTER_SPACING)->GetValue();
+ pObj->SetMergedItem( SvxCharScaleWidthItem( static_cast<sal_uInt16>(nCharSpacing), EE_CHAR_FONTWIDTH ) );
+ pObj->BroadcastObjectChange();
+ }
+ }
+ break;
+
+ case SID_FONTWORK_KERN_CHARACTER_PAIRS:
+ {
+ if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_KERN_CHARACTER_PAIRS ) == SfxItemState::SET ) )
+ {
+ // sal_Bool bKernCharacterPairs = ((const SfxBoolItem*)rReq.GetArgs()->GetItem(SID_FONTWORK_KERN_CHARACTER_PAIRS))->GetValue();
+//TODO: pObj->SetMergedItem( SvxCharScaleWidthItem( (sal_uInt16)nCharSpacing, EE_CHAR_FONTWIDTH ) );
+ pObj->BroadcastObjectChange();
+ }
+ }
+ break;
+ }
+}
+
+static void GetGeometryForCustomShape( SdrCustomShapeGeometryItem& rGeometryItem, const OUString& rCustomShape )
+{
+ const OUString sType( "Type" );
+
+ css::beans::PropertyValue aPropVal;
+ aPropVal.Name = sType;
+ aPropVal.Value <<= rCustomShape;
+ rGeometryItem.SetPropertyValue( aPropVal );
+
+ const OUString sAdjustmentValues( "AdjustmentValues" );
+ const OUString sCoordinateOrigin( "CoordinateOrigin" );
+ const OUString sCoordinateSize( "CoordinateSize" );
+ const OUString sEquations( "Equations" );
+ const OUString sHandles( "Handles" );
+ const OUString sPath( "Path" );
+ rGeometryItem.ClearPropertyValue( sAdjustmentValues );
+ rGeometryItem.ClearPropertyValue( sCoordinateOrigin );
+ rGeometryItem.ClearPropertyValue( sCoordinateSize );
+ rGeometryItem.ClearPropertyValue( sEquations );
+ rGeometryItem.ClearPropertyValue( sHandles );
+ rGeometryItem.ClearPropertyValue( sPath );
+
+ /* SJ: CustomShapes that are available in the gallery are having the highest
+ priority, so we will take a look there before taking the internal default */
+
+ if ( GalleryExplorer::GetSdrObjCount( GALLERY_THEME_POWERPOINT ) )
+ {
+ std::vector< OUString > aObjList;
+ if ( GalleryExplorer::FillObjListTitle( GALLERY_THEME_POWERPOINT, aObjList ) )
+ {
+ for ( std::vector<OUString>::size_type i = 0; i < aObjList.size(); i++ )
+ {
+ if ( aObjList[ i ].equalsIgnoreAsciiCase( rCustomShape ) )
+ {
+ FmFormModel aFormModel;
+ SfxItemPool& rPool(aFormModel.GetItemPool());
+ rPool.FreezeIdRanges();
+
+ if ( GalleryExplorer::GetSdrObj( GALLERY_THEME_POWERPOINT, i, &aFormModel ) )
+ {
+ const SdrObject* pSourceObj = nullptr;
+ if (aFormModel.GetPageCount() > 0)
+ pSourceObj = aFormModel.GetPage( 0 )->GetObj( 0 );
+ SAL_WARN_IF(!pSourceObj, "svx.form", "No content in gallery custom shape '" << rCustomShape << "'" );
+ if( pSourceObj )
+ {
+ PropertyValue aPropVal_;
+ const SdrCustomShapeGeometryItem& rSourceGeometry = pSourceObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY );
+ const css::uno::Any* pAny = rSourceGeometry.GetPropertyValueByName( sType );
+ if ( pAny )
+ {
+ aPropVal_.Name = sType;
+ aPropVal_.Value = *pAny;
+ rGeometryItem.SetPropertyValue( aPropVal_ );
+ }
+ pAny = rSourceGeometry.GetPropertyValueByName( sAdjustmentValues );
+ if ( pAny )
+ {
+ aPropVal_.Name = sAdjustmentValues;
+ aPropVal_.Value = *pAny;
+ rGeometryItem.SetPropertyValue( aPropVal_ );
+ }
+ pAny = rSourceGeometry.GetPropertyValueByName( sCoordinateOrigin );
+ if ( pAny )
+ {
+ aPropVal_.Name = sCoordinateOrigin;
+ aPropVal_.Value = *pAny;
+ rGeometryItem.SetPropertyValue( aPropVal_ );
+ }
+ pAny = rSourceGeometry.GetPropertyValueByName( sCoordinateSize );
+ if ( pAny )
+ {
+ aPropVal_.Name = sCoordinateSize;
+ aPropVal_.Value = *pAny;
+ rGeometryItem.SetPropertyValue( aPropVal_ );
+ }
+ pAny = rSourceGeometry.GetPropertyValueByName( sEquations );
+ if ( pAny )
+ {
+ aPropVal_.Name = sEquations;
+ aPropVal_.Value = *pAny;
+ rGeometryItem.SetPropertyValue( aPropVal_ );
+ }
+ pAny = rSourceGeometry.GetPropertyValueByName( sHandles );
+ if ( pAny )
+ {
+ aPropVal_.Name = sHandles;
+ aPropVal_.Value = *pAny;
+ rGeometryItem.SetPropertyValue( aPropVal_ );
+ }
+ pAny = rSourceGeometry.GetPropertyValueByName( sPath );
+ if ( pAny )
+ {
+ aPropVal_.Name = sPath;
+ aPropVal_.Value = *pAny;
+ rGeometryItem.SetPropertyValue( aPropVal_ );
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+
+void FontworkBar::execute( SdrView& rSdrView, SfxRequest const & rReq, SfxBindings& rBindings )
+{
+ const char* pStrResId = nullptr;
+
+ sal_uInt16 nSID = rReq.GetSlot();
+ switch( nSID )
+ {
+ case SID_FONTWORK_GALLERY_FLOATER:
+ {
+ FontWorkGalleryDialog aDlg(rReq.GetFrameWeld(), rSdrView);
+ aDlg.run();
+ }
+ break;
+
+ case SID_FONTWORK_SHAPE_TYPE:
+ {
+ OUString aCustomShape;
+ const SfxItemSet* pArgs = rReq.GetArgs();
+ if ( pArgs )
+ {
+ const SfxStringItem& rItm = static_cast<const SfxStringItem&>(pArgs->Get( rReq.GetSlot() ));
+ aCustomShape = rItm.GetValue();
+ }
+ if ( !aCustomShape.isEmpty() )
+ {
+ const SdrMarkList& rMarkList = rSdrView.GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+ for( size_t i = 0; i < nCount; ++i )
+ {
+ SdrObject* pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const bool bUndo = rSdrView.IsUndoEnabled();
+
+ if( bUndo )
+ {
+ OUString aStr( SvxResId( RID_SVXSTR_UNDO_APPLY_FONTWORK_SHAPE ) );
+ rSdrView.BegUndo(aStr);
+ rSdrView.AddUndo(rSdrView.GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj));
+ }
+ SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ GetGeometryForCustomShape( aGeometryItem, aCustomShape );
+ pObj->SetMergedItem( aGeometryItem );
+
+ Reference< drawing::XShape > aXShape = GetXShapeForSdrObject( static_cast<SdrObjCustomShape*>(pObj) );
+ if ( aXShape.is() )
+ {
+ Reference< drawing::XEnhancedCustomShapeDefaulter > xDefaulter( aXShape, UNO_QUERY );
+ if( xDefaulter.is() )
+ xDefaulter->createCustomShapeDefaults( aCustomShape );
+ }
+
+ pObj->BroadcastObjectChange();
+ if (bUndo)
+ rSdrView.EndUndo();
+ rSdrView.AdjustMarkHdl(); //HMH sal_True );
+ rBindings.Invalidate( SID_FONTWORK_SHAPE_TYPE );
+ }
+ }
+ }
+ }
+ break;
+
+ case SID_FONTWORK_CHARACTER_SPACING_DIALOG :
+ {
+ if( rReq.GetArgs() && ( rReq.GetArgs()->GetItemState( SID_FONTWORK_CHARACTER_SPACING ) == SfxItemState::SET ) )
+ {
+ sal_Int32 nCharSpacing = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_FONTWORK_CHARACTER_SPACING)->GetValue();
+ FontworkCharacterSpacingDialog aDlg(rReq.GetFrameWeld(), nCharSpacing);
+ sal_uInt16 nRet = aDlg.run();
+ if (nRet != RET_CANCEL)
+ {
+ SfxInt32Item aItem(SID_FONTWORK_CHARACTER_SPACING, aDlg.getScale());
+ SfxPoolItem* aItems[] = { &aItem, nullptr };
+ rBindings.Execute( SID_FONTWORK_CHARACTER_SPACING, const_cast<const SfxPoolItem**>(aItems) );
+ }
+ }
+ }
+ break;
+
+ case SID_FONTWORK_SHAPE:
+ case SID_FONTWORK_ALIGNMENT:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_ALIGNMENT;
+ [[fallthrough]];
+ }
+ case SID_FONTWORK_CHARACTER_SPACING:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_CHARACTER_SPACING;
+ [[fallthrough]];
+ }
+ case SID_FONTWORK_KERN_CHARACTER_PAIRS:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_CHARACTER_SPACING;
+ [[fallthrough]];
+ }
+ case SID_FONTWORK_SAME_LETTER_HEIGHTS:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_FONTWORK_SAME_LETTER_HEIGHT;
+
+ const SdrMarkList& rMarkList = rSdrView.GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+ for( size_t i = 0; i < nCount; ++i )
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const bool bUndo = rSdrView.IsUndoEnabled();
+ if( bUndo )
+ {
+ OUString aStr( SvxResId( pStrResId ) );
+ rSdrView.BegUndo(aStr);
+ rSdrView.AddUndo(rSdrView.GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj));
+ }
+ SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ impl_execute( rReq, aGeometryItem, pObj );
+ pObj->SetMergedItem( aGeometryItem );
+ pObj->BroadcastObjectChange();
+ if (bUndo)
+ rSdrView.EndUndo();
+ }
+ }
+ }
+ break;
+ }
+}
+
+void FontworkBar::getState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ sal_uInt32 nCheckStatus = 0;
+
+ if ( rSet.GetItemState( SID_FONTWORK_ALIGNMENT_FLOATER ) != SfxItemState::UNKNOWN )
+ {
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ rSet.DisableItem( SID_FONTWORK_ALIGNMENT_FLOATER );
+ }
+ if ( rSet.GetItemState( SID_FONTWORK_ALIGNMENT ) != SfxItemState::UNKNOWN )
+ {
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ rSet.DisableItem( SID_FONTWORK_ALIGNMENT );
+ else
+ SetAlignmentState( pSdrView, rSet );
+ }
+ if ( rSet.GetItemState( SID_FONTWORK_CHARACTER_SPACING_FLOATER ) != SfxItemState::UNKNOWN )
+ {
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ rSet.DisableItem( SID_FONTWORK_CHARACTER_SPACING_FLOATER );
+ }
+ if ( rSet.GetItemState( SID_FONTWORK_CHARACTER_SPACING ) != SfxItemState::UNKNOWN )
+ {
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ rSet.DisableItem( SID_FONTWORK_CHARACTER_SPACING );
+ else
+ SetCharacterSpacingState( pSdrView, rSet );
+ }
+ if ( rSet.GetItemState( SID_FONTWORK_KERN_CHARACTER_PAIRS ) != SfxItemState::UNKNOWN )
+ {
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ rSet.DisableItem( SID_FONTWORK_KERN_CHARACTER_PAIRS );
+ else
+ SetKernCharacterPairsState( pSdrView, rSet );
+ }
+ if ( rSet.GetItemState( SID_FONTWORK_SAME_LETTER_HEIGHTS ) != SfxItemState::UNKNOWN )
+ {
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ rSet.DisableItem( SID_FONTWORK_SAME_LETTER_HEIGHTS );
+ }
+ if ( rSet.GetItemState( SID_FONTWORK_SHAPE_TYPE ) != SfxItemState::UNKNOWN )
+ {
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ rSet.DisableItem( SID_FONTWORK_SHAPE_TYPE );
+ else
+ SetFontWorkShapeTypeState( pSdrView, rSet );
+ }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 12:30:16 +0000