diff options
Diffstat (limited to '')
| -rw-r--r-- | svx/source/unodraw/unoshap2.cxx | 1794 |
1 files changed, 1794 insertions, 0 deletions
diff --git a/svx/source/unodraw/unoshap2.cxx b/svx/source/unodraw/unoshap2.cxx new file mode 100644 index 000000000..81ee65620 --- /dev/null +++ b/svx/source/unodraw/unoshap2.cxx @@ -0,0 +1,1794 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp> +#include <com/sun/star/lang/DisposedException.hpp> +#include <com/sun/star/lang/IndexOutOfBoundsException.hpp> +#include <com/sun/star/awt/FontSlant.hpp> +#include <com/sun/star/style/VerticalAlignment.hpp> +#include <com/sun/star/drawing/TextVerticalAdjust.hpp> +#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp> +#include <com/sun/star/awt/TextAlign.hpp> +#include <com/sun/star/style/ParagraphAdjust.hpp> +#include <com/sun/star/drawing/PointSequenceSequence.hpp> +#include <com/sun/star/drawing/PointSequence.hpp> +#include <com/sun/star/drawing/PolygonKind.hpp> +#include <com/sun/star/graphic/XGraphic.hpp> +#include <com/sun/star/drawing/QRCode.hpp> +#include <o3tl/any.hxx> +#include <o3tl/safeint.hxx> +#include <vcl/svapp.hxx> +#include <vcl/wmf.hxx> +#include <vcl/cvtgrf.hxx> +#include <vcl/GraphicLoader.hxx> + +#include <svx/svdpool.hxx> + +#include <editeng/unoprnms.hxx> +#include <svx/unoshape.hxx> +#include <svx/unopage.hxx> +#include <svx/svdobj.hxx> +#include <svx/svdpage.hxx> +#include <svx/svdmodel.hxx> +#include <svx/svdouno.hxx> +#include "shapeimpl.hxx" +#include <svx/unoshprp.hxx> +#include <svx/svdoashp.hxx> +#include <svx/svdviter.hxx> +#include <svx/svdview.hxx> +#include <svx/svdopath.hxx> +#include <basegfx/matrix/b2dhommatrix.hxx> +#include <basegfx/polygon/b2dpolygon.hxx> +#include <basegfx/point/b2dpoint.hxx> +#include <basegfx/polygon/b2dpolygontools.hxx> +#include <basegfx/polygon/b2dpolypolygontools.hxx> +#include <com/sun/star/awt/XBitmap.hpp> +#include <svx/svdograf.hxx> +#include <sal/log.hxx> +#include <cppuhelper/queryinterface.hxx> +#include <tools/stream.hxx> + + +#include <memory> + +using namespace ::osl; +using namespace ::cppu; +using namespace ::com::sun::star; +using namespace ::com::sun::star::uno; +using namespace ::com::sun::star::lang; +using namespace ::com::sun::star::container; + +#define QUERYINT( xint ) \ + if( rType == cppu::UnoType<xint>::get() ) \ + aAny <<= Reference< xint >(this) + +SvxShapeGroup::SvxShapeGroup(SdrObject* pObj, SvxDrawPage* pDrawPage) + : SvxShape(pObj, getSvxMapProvider().GetMap(SVXMAP_GROUP), getSvxMapProvider().GetPropertySet(SVXMAP_GROUP, SdrObject::GetGlobalDrawObjectItemPool())) + , mxPage(pDrawPage) +{ +} + +SvxShapeGroup::~SvxShapeGroup() throw() +{ +} + +void SvxShapeGroup::Create( SdrObject* pNewObj, SvxDrawPage* pNewPage ) +{ + SvxShape::Create( pNewObj, pNewPage ); + mxPage = pNewPage; +} + + +uno::Any SAL_CALL SvxShapeGroup::queryInterface( const uno::Type & rType ) +{ + return SvxShape::queryInterface( rType ); +} + +uno::Any SAL_CALL SvxShapeGroup::queryAggregation( const uno::Type & rType ) +{ + uno::Any aAny; + + QUERYINT( drawing::XShapeGroup ); + else QUERYINT( drawing::XShapes ); + else QUERYINT( drawing::XShapes2 ); + else QUERYINT( container::XIndexAccess ); + else QUERYINT( container::XElementAccess ); + else + return SvxShape::queryAggregation( rType ); + + return aAny; +} + +uno::Sequence< sal_Int8 > SAL_CALL SvxShapeGroup::getImplementationId() +{ + return css::uno::Sequence<sal_Int8>(); +} + +// css::drawing::XShape + + +OUString SAL_CALL SvxShapeGroup::getShapeType() +{ + return SvxShape::getShapeType(); +} + +awt::Point SAL_CALL SvxShapeGroup::getPosition() +{ + return SvxShape::getPosition(); +} + + +void SAL_CALL SvxShapeGroup::setPosition( const awt::Point& Position ) +{ + SvxShape::setPosition(Position); +} + + +awt::Size SAL_CALL SvxShapeGroup::getSize() +{ + return SvxShape::getSize(); +} + + +void SAL_CALL SvxShapeGroup::setSize( const awt::Size& rSize ) +{ + SvxShape::setSize( rSize ); +} + +// drawing::XShapeGroup + + +void SAL_CALL SvxShapeGroup::enterGroup( ) +{ + // Todo +// pDrView->EnterMarkedGroup(); +} + + +void SAL_CALL SvxShapeGroup::leaveGroup( ) +{ + // Todo +// pDrView->LeaveOneGroup(); +} + +void SvxShapeGroup::addUnoShape( const uno::Reference< drawing::XShape >& xShape, size_t nPos ) +{ + if (!HasSdrObject() || !mxPage.is()) + { + OSL_FAIL("could not add XShape to group shape!"); + return; + } + + SvxShape* pShape = comphelper::getUnoTunnelImplementation<SvxShape>( xShape ); + if (!pShape) + { + OSL_FAIL("could not add XShape to group shape!"); + return; + } + + SdrObject* pSdrShape = pShape->GetSdrObject(); + if( pSdrShape == nullptr ) + pSdrShape = mxPage->CreateSdrObject_( xShape ); + + if( pSdrShape->IsInserted() ) + pSdrShape->getParentSdrObjListFromSdrObject()->RemoveObject( pSdrShape->GetOrdNum() ); + + GetSdrObject()->GetSubList()->InsertObject(pSdrShape, nPos); + // TTTT Was created using mpModel in CreateSdrObject_ above + // TTTT may be good to add an assertion here for the future + // pSdrShape->SetModel(GetSdrObject()->GetModel()); + + // #85922# It makes no sense to set the layer asked + // from the group object since this is an iteration + // over the contained objects. In consequence, this + // statement erases all layer information from the draw + // objects. Layers need to be set at draw objects directly + // and have nothing to do with grouping at all. + // pSdrShape->SetLayer(pObject->GetLayer()); + + // Establish connection between new SdrObject and its wrapper before + // inserting the new shape into the group. There a new wrapper + // would be created when this connection would not already exist. + pShape->Create( pSdrShape, mxPage.get() ); + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); +} + +// XShapes +void SAL_CALL SvxShapeGroup::add( const uno::Reference< drawing::XShape >& xShape ) +{ + ::SolarMutexGuard aGuard; + + // Add to the top of the stack (i.e. bottom of the list) by default. + addUnoShape(xShape, SAL_MAX_SIZE); +} + + +void SAL_CALL SvxShapeGroup::remove( const uno::Reference< drawing::XShape >& xShape ) +{ + ::SolarMutexGuard aGuard; + + SdrObject* pSdrShape = nullptr; + SvxShape* pShape = comphelper::getUnoTunnelImplementation<SvxShape>( xShape ); + + if( pShape ) + pSdrShape = pShape->GetSdrObject(); + + if( !HasSdrObject() || pSdrShape == nullptr || pSdrShape->getParentSdrObjectFromSdrObject() != GetSdrObject() ) + throw uno::RuntimeException(); + + SdrObjList& rList = *pSdrShape->getParentSdrObjListFromSdrObject(); + + const size_t nObjCount = rList.GetObjCount(); + size_t nObjNum = 0; + while( nObjNum < nObjCount ) + { + if(rList.GetObj( nObjNum ) == pSdrShape ) + break; + nObjNum++; + } + + if( nObjNum < nObjCount ) + { + // #i29181# + // If the SdrObject which is about to be deleted is in any selection, + // deselect it first. + SdrViewIter aIter( pSdrShape ); + + for ( SdrView* pView = aIter.FirstView(); pView; pView = aIter.NextView() ) + { + if(SAL_MAX_SIZE != pView->TryToFindMarkedObject(pSdrShape)) + { + pView->MarkObj(pSdrShape, pView->GetSdrPageView(), true); + } + } + + SdrObject* pObject = rList.NbcRemoveObject( nObjNum ); + SdrObject::Free( pObject ); + } + else + { + SAL_WARN( "svx", "Fatality! SdrObject is not belonging to its SdrObjList! [CL]" ); + } + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); +} + +void SAL_CALL SvxShapeGroup::addTop( const uno::Reference< drawing::XShape >& xShape ) +{ + SolarMutexGuard aGuard; + + // Add to the top of the stack (i.e. bottom of the list). + addUnoShape(xShape, SAL_MAX_SIZE); +} + +void SAL_CALL SvxShapeGroup::addBottom( const uno::Reference< drawing::XShape >& xShape ) +{ + SolarMutexGuard aGuard; + + // Add to the bottom of the stack (i.e. top of the list). + addUnoShape(xShape, 0); +} + +// XIndexAccess + + +sal_Int32 SAL_CALL SvxShapeGroup::getCount() +{ + ::SolarMutexGuard aGuard; + + if(!HasSdrObject() || !GetSdrObject()->GetSubList()) + throw uno::RuntimeException(); + + sal_Int32 nRetval = GetSdrObject()->GetSubList()->GetObjCount(); + return nRetval; +} + + +uno::Any SAL_CALL SvxShapeGroup::getByIndex( sal_Int32 Index ) +{ + ::SolarMutexGuard aGuard; + + if( !HasSdrObject() || GetSdrObject()->GetSubList() == nullptr ) + throw uno::RuntimeException(); + + if( Index<0 || GetSdrObject()->GetSubList()->GetObjCount() <= o3tl::make_unsigned(Index) ) + throw lang::IndexOutOfBoundsException(); + + SdrObject* pDestObj = GetSdrObject()->GetSubList()->GetObj( Index ); + + if(pDestObj == nullptr) + throw lang::IndexOutOfBoundsException(); + + Reference< drawing::XShape > xShape( pDestObj->getUnoShape(), uno::UNO_QUERY ); + return uno::makeAny( xShape ); +} + +// css::container::XElementAccess + + +uno::Type SAL_CALL SvxShapeGroup::getElementType() +{ + return cppu::UnoType<drawing::XShape>::get(); +} + + +sal_Bool SAL_CALL SvxShapeGroup::hasElements() +{ + ::SolarMutexGuard aGuard; + + return HasSdrObject() && GetSdrObject()->GetSubList() && (GetSdrObject()->GetSubList()->GetObjCount() > 0); +} + +SvxShapeConnector::SvxShapeConnector(SdrObject* pObj) + : SvxShapeText( pObj, getSvxMapProvider().GetMap(SVXMAP_CONNECTOR), getSvxMapProvider().GetPropertySet(SVXMAP_CONNECTOR, SdrObject::GetGlobalDrawObjectItemPool()) ) +{ +} + + +SvxShapeConnector::~SvxShapeConnector() throw() +{ +} + + +uno::Any SAL_CALL SvxShapeConnector::queryInterface( const uno::Type & rType ) +{ + return SvxShapeText::queryInterface( rType ); +} + +uno::Any SAL_CALL SvxShapeConnector::queryAggregation( const uno::Type & rType ) +{ + uno::Any aAny; + + QUERYINT( drawing::XConnectorShape ); + else + return SvxShapeText::queryAggregation( rType ); + + return aAny; +} + +// XTypeProvider + +uno::Sequence< uno::Type > SAL_CALL SvxShapeConnector::getTypes() +{ + return SvxShape::getTypes(); +} + +uno::Sequence< sal_Int8 > SAL_CALL SvxShapeConnector::getImplementationId() +{ + return css::uno::Sequence<sal_Int8>(); +} + +// css::drawing::XShape + + +OUString SAL_CALL SvxShapeConnector::getShapeType() +{ + return SvxShapeText::getShapeType(); +} + +awt::Point SAL_CALL SvxShapeConnector::getPosition() +{ + return SvxShapeText::getPosition(); +} + + +void SAL_CALL SvxShapeConnector::setPosition( const awt::Point& Position ) +{ + SvxShapeText::setPosition(Position); +} + + +awt::Size SAL_CALL SvxShapeConnector::getSize() +{ + return SvxShapeText::getSize(); +} + + +void SAL_CALL SvxShapeConnector::setSize( const awt::Size& rSize ) +{ + SvxShapeText::setSize( rSize ); +} + + +// XConnectorShape + +void SAL_CALL SvxShapeConnector::connectStart( const uno::Reference< drawing::XConnectableShape >& xShape, drawing::ConnectionType ) +{ + ::SolarMutexGuard aGuard; + + Reference< drawing::XShape > xRef( xShape, UNO_QUERY ); + SvxShape* pShape = comphelper::getUnoTunnelImplementation<SvxShape>( xRef ); + + if( pShape ) + GetSdrObject()->ConnectToNode( true, pShape->GetSdrObject() ); + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); +} + + +void SAL_CALL SvxShapeConnector::connectEnd( const uno::Reference< drawing::XConnectableShape >& xShape, drawing::ConnectionType ) +{ + ::SolarMutexGuard aGuard; + + Reference< drawing::XShape > xRef( xShape, UNO_QUERY ); + SvxShape* pShape = comphelper::getUnoTunnelImplementation<SvxShape>( xRef ); + + if( HasSdrObject() && pShape ) + GetSdrObject()->ConnectToNode( false, pShape->GetSdrObject() ); + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); +} + + +void SAL_CALL SvxShapeConnector::disconnectBegin( const uno::Reference< drawing::XConnectableShape >& ) +{ + ::SolarMutexGuard aGuard; + + if(HasSdrObject()) + GetSdrObject()->DisconnectFromNode( true ); + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); +} + + +void SAL_CALL SvxShapeConnector::disconnectEnd( const uno::Reference< drawing::XConnectableShape >& ) +{ + ::SolarMutexGuard aGuard; + + if(HasSdrObject()) + GetSdrObject()->DisconnectFromNode( false ); + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); +} + +SvxShapeControl::SvxShapeControl(SdrObject* pObj) + : SvxShapeText( pObj, getSvxMapProvider().GetMap(SVXMAP_CONTROL), getSvxMapProvider().GetPropertySet(SVXMAP_CONTROL, SdrObject::GetGlobalDrawObjectItemPool()) ) +{ + setShapeKind( OBJ_UNO ); +} + + +SvxShapeControl::~SvxShapeControl() throw() +{ +} + + +uno::Any SAL_CALL SvxShapeControl::queryInterface( const uno::Type & rType ) +{ + return SvxShapeText::queryInterface( rType ); +} + +uno::Any SAL_CALL SvxShapeControl::queryAggregation( const uno::Type & rType ) +{ + uno::Any aAny; + + QUERYINT( drawing::XControlShape ); + else + return SvxShapeText::queryAggregation( rType ); + + return aAny; +} + +// XTypeProvider + +uno::Sequence< uno::Type > SAL_CALL SvxShapeControl::getTypes() +{ + return SvxShape::getTypes(); +} + +uno::Sequence< sal_Int8 > SAL_CALL SvxShapeControl::getImplementationId() +{ + return css::uno::Sequence<sal_Int8>(); +} + +// css::drawing::XShape + + +OUString SAL_CALL SvxShapeControl::getShapeType() +{ + return SvxShapeText::getShapeType(); +} + +awt::Point SAL_CALL SvxShapeControl::getPosition() +{ + return SvxShapeText::getPosition(); +} + + +void SAL_CALL SvxShapeControl::setPosition( const awt::Point& Position ) +{ + SvxShapeText::setPosition(Position); +} + + +awt::Size SAL_CALL SvxShapeControl::getSize() +{ + return SvxShapeText::getSize(); +} + + +void SAL_CALL SvxShapeControl::setSize( const awt::Size& rSize ) +{ + SvxShapeText::setSize( rSize ); +} + + +// XControlShape + +Reference< awt::XControlModel > SAL_CALL SvxShapeControl::getControl() +{ + ::SolarMutexGuard aGuard; + + Reference< awt::XControlModel > xModel; + + SdrUnoObj* pUnoObj = dynamic_cast< SdrUnoObj * >(GetSdrObject()); + if( pUnoObj ) + xModel = pUnoObj->GetUnoControlModel(); + + return xModel; +} + + +void SAL_CALL SvxShapeControl::setControl( const Reference< awt::XControlModel >& xControl ) +{ + ::SolarMutexGuard aGuard; + + SdrUnoObj* pUnoObj = dynamic_cast< SdrUnoObj * >(GetSdrObject()); + if( pUnoObj ) + pUnoObj->SetUnoControlModel( xControl ); + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); +} + +static struct +{ + const char* mpAPIName; + sal_uInt16 mnAPINameLen; + + const char* mpFormName; + sal_uInt16 mnFormNameLen; +} +const SvxShapeControlPropertyMapping[] = +{ + // Warning: The first entry must be FontSlant because the any needs to be converted + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_POSTURE), RTL_CONSTASCII_STRINGPARAM("FontSlant") }, // const sal_Int16 => css::awt::FontSlant + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_FONTNAME), RTL_CONSTASCII_STRINGPARAM("FontName") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_FONTSTYLENAME), RTL_CONSTASCII_STRINGPARAM("FontStyleName") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_FONTFAMILY), RTL_CONSTASCII_STRINGPARAM("FontFamily") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_FONTCHARSET), RTL_CONSTASCII_STRINGPARAM("FontCharset") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_HEIGHT), RTL_CONSTASCII_STRINGPARAM("FontHeight") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_FONTPITCH), RTL_CONSTASCII_STRINGPARAM("FontPitch" ) }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_WEIGHT), RTL_CONSTASCII_STRINGPARAM("FontWeight" ) }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_UNDERLINE), RTL_CONSTASCII_STRINGPARAM("FontUnderline") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_STRIKEOUT), RTL_CONSTASCII_STRINGPARAM("FontStrikeout") }, + { RTL_CONSTASCII_STRINGPARAM("CharKerning"), RTL_CONSTASCII_STRINGPARAM("FontKerning") }, + { RTL_CONSTASCII_STRINGPARAM("CharWordMode"), RTL_CONSTASCII_STRINGPARAM("FontWordLineMode" ) }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_CHAR_COLOR), RTL_CONSTASCII_STRINGPARAM("TextColor") }, + { RTL_CONSTASCII_STRINGPARAM("CharBackColor"), RTL_CONSTASCII_STRINGPARAM("CharBackColor") }, + { RTL_CONSTASCII_STRINGPARAM("CharBackTransparent"), RTL_CONSTASCII_STRINGPARAM("CharBackTransparent") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_TEXT_CHAINNEXTNAME), RTL_CONSTASCII_STRINGPARAM(UNO_NAME_TEXT_CHAINNEXTNAME) }, + { RTL_CONSTASCII_STRINGPARAM("CharRelief"), RTL_CONSTASCII_STRINGPARAM("FontRelief") }, + { RTL_CONSTASCII_STRINGPARAM("CharUnderlineColor"), RTL_CONSTASCII_STRINGPARAM("TextLineColor") }, + { RTL_CONSTASCII_STRINGPARAM(UNO_NAME_EDIT_PARA_ADJUST), RTL_CONSTASCII_STRINGPARAM("Align") }, + { RTL_CONSTASCII_STRINGPARAM("TextVerticalAdjust"), RTL_CONSTASCII_STRINGPARAM("VerticalAlign") }, + { RTL_CONSTASCII_STRINGPARAM("ControlBackground"), RTL_CONSTASCII_STRINGPARAM("BackgroundColor") }, + { RTL_CONSTASCII_STRINGPARAM("ControlSymbolColor"), RTL_CONSTASCII_STRINGPARAM("SymbolColor") }, + { RTL_CONSTASCII_STRINGPARAM("ControlBorder"), RTL_CONSTASCII_STRINGPARAM("Border") }, + { RTL_CONSTASCII_STRINGPARAM("ControlBorderColor"), RTL_CONSTASCII_STRINGPARAM("BorderColor") }, + { RTL_CONSTASCII_STRINGPARAM("ControlTextEmphasis"), RTL_CONSTASCII_STRINGPARAM("FontEmphasisMark") }, + { RTL_CONSTASCII_STRINGPARAM("ImageScaleMode"), RTL_CONSTASCII_STRINGPARAM("ScaleMode") }, + { RTL_CONSTASCII_STRINGPARAM("ControlWritingMode"), RTL_CONSTASCII_STRINGPARAM("WritingMode") }, + //added for exporting OCX control + { RTL_CONSTASCII_STRINGPARAM("ControlTypeinMSO"), RTL_CONSTASCII_STRINGPARAM("ControlTypeinMSO") }, + { RTL_CONSTASCII_STRINGPARAM("ObjIDinMSO"), RTL_CONSTASCII_STRINGPARAM("ObjIDinMSO") }, + { RTL_CONSTASCII_STRINGPARAM("CharCaseMap"), RTL_CONSTASCII_STRINGPARAM("CharCaseMap") }, + { nullptr,0, nullptr, 0 } +}; + +namespace +{ + bool lcl_convertPropertyName( const OUString& rApiName, OUString& rInternalName ) + { + sal_uInt16 i = 0; + while( SvxShapeControlPropertyMapping[i].mpAPIName ) + { + if( rApiName.reverseCompareToAsciiL( SvxShapeControlPropertyMapping[i].mpAPIName, SvxShapeControlPropertyMapping[i].mnAPINameLen ) == 0 ) + { + rInternalName = OUString( SvxShapeControlPropertyMapping[i].mpFormName, SvxShapeControlPropertyMapping[i].mnFormNameLen, RTL_TEXTENCODING_ASCII_US ); + } + ++i; + } + return !rInternalName.isEmpty(); + } + + struct EnumConversionMap + { + style::ParagraphAdjust nAPIValue; + sal_Int16 nFormValue; + }; + + EnumConversionMap const aMapAdjustToAlign[] = + { + // note that order matters: + // lcl_convertTextAlignmentToParaAdjustment and lcl_convertParaAdjustmentToTextAlignment search this map from the _beginning_ + // and use the first matching entry + {style::ParagraphAdjust_LEFT, sal_Int16(awt::TextAlign::LEFT)}, + {style::ParagraphAdjust_CENTER, sal_Int16(awt::TextAlign::CENTER)}, + {style::ParagraphAdjust_RIGHT, sal_Int16(awt::TextAlign::RIGHT)}, + {style::ParagraphAdjust_BLOCK, sal_Int16(awt::TextAlign::RIGHT)}, + {style::ParagraphAdjust_STRETCH, sal_Int16(awt::TextAlign::LEFT)}, + {style::ParagraphAdjust(-1),-1} + }; + + void lcl_convertTextAlignmentToParaAdjustment( Any& _rValue ) + { + sal_Int16 nValue = sal_Int16(); + OSL_VERIFY( _rValue >>= nValue ); + + for ( auto const & rEntry : aMapAdjustToAlign ) + if ( nValue == rEntry.nFormValue ) + { + _rValue <<= static_cast<sal_uInt16>(rEntry.nAPIValue); + return; + } + } + + void lcl_convertParaAdjustmentToTextAlignment( Any& _rValue ) + { + sal_Int32 nValue = 0; + OSL_VERIFY( _rValue >>= nValue ); + + for ( auto const & rEntry : aMapAdjustToAlign ) + if ( static_cast<style::ParagraphAdjust>(nValue) == rEntry.nAPIValue ) + { + _rValue <<= rEntry.nFormValue; + return; + } + } + + void convertVerticalAdjustToVerticalAlign( Any& _rValue ) + { + if ( !_rValue.hasValue() ) + return; + + drawing::TextVerticalAdjust eAdjust = drawing::TextVerticalAdjust_TOP; + style::VerticalAlignment eAlign = style::VerticalAlignment_TOP; + if ( !( _rValue >>= eAdjust ) ) + throw lang::IllegalArgumentException(); + switch ( eAdjust ) + { + case drawing::TextVerticalAdjust_TOP: eAlign = style::VerticalAlignment_TOP; break; + case drawing::TextVerticalAdjust_BOTTOM: eAlign = style::VerticalAlignment_BOTTOM; break; + default: eAlign = style::VerticalAlignment_MIDDLE; break; + } + _rValue <<= eAlign; + } + + void convertVerticalAlignToVerticalAdjust( Any& _rValue ) + { + if ( !_rValue.hasValue() ) + return; + style::VerticalAlignment eAlign = style::VerticalAlignment_TOP; + drawing::TextVerticalAdjust eAdjust = drawing::TextVerticalAdjust_TOP; + OSL_VERIFY( _rValue >>= eAlign ); + switch ( eAlign ) + { + case style::VerticalAlignment_TOP: eAdjust = drawing::TextVerticalAdjust_TOP; break; + case style::VerticalAlignment_BOTTOM: eAdjust = drawing::TextVerticalAdjust_BOTTOM; break; + default: eAdjust = drawing::TextVerticalAdjust_CENTER; break; + } + _rValue <<= eAdjust; + } +} + +void SAL_CALL SvxShapeControl::setPropertyValue( const OUString& aPropertyName, const uno::Any& aValue ) +{ + OUString aFormsName; + if ( lcl_convertPropertyName( aPropertyName, aFormsName ) ) + { + uno::Reference< beans::XPropertySet > xControl( getControl(), uno::UNO_QUERY ); + if( xControl.is() ) + { + uno::Reference< beans::XPropertySetInfo > xInfo( xControl->getPropertySetInfo() ); + if( xInfo.is() && xInfo->hasPropertyByName( aFormsName ) ) + { + uno::Any aConvertedValue( aValue ); + if ( aFormsName == "FontSlant" ) + { + awt::FontSlant nSlant; + if( !(aValue >>= nSlant ) ) + throw lang::IllegalArgumentException(); + aConvertedValue <<= static_cast<sal_Int16>(nSlant); + } + else if ( aFormsName == "Align" ) + { + lcl_convertParaAdjustmentToTextAlignment( aConvertedValue ); + } + else if ( aFormsName == "VerticalAlign" ) + { + convertVerticalAdjustToVerticalAlign( aConvertedValue ); + } + + xControl->setPropertyValue( aFormsName, aConvertedValue ); + } + } + } + else + { + SvxShape::setPropertyValue( aPropertyName, aValue ); + } +} + +uno::Any SAL_CALL SvxShapeControl::getPropertyValue( const OUString& aPropertyName ) +{ + OUString aFormsName; + if ( lcl_convertPropertyName( aPropertyName, aFormsName ) ) + { + uno::Reference< beans::XPropertySet > xControl( getControl(), uno::UNO_QUERY ); + + uno::Any aValue; + if( xControl.is() ) + { + uno::Reference< beans::XPropertySetInfo > xInfo( xControl->getPropertySetInfo() ); + if( xInfo.is() && xInfo->hasPropertyByName( aFormsName ) ) + { + aValue = xControl->getPropertyValue( aFormsName ); + if ( aFormsName == "FontSlant" ) + { + awt::FontSlant eSlant = awt::FontSlant_NONE; + sal_Int16 nSlant = sal_Int16(); + if ( aValue >>= nSlant ) + { + eSlant = static_cast<awt::FontSlant>(nSlant); + } + else + { + OSL_VERIFY( aValue >>= eSlant ); + } + aValue <<= eSlant; + } + else if ( aFormsName == "Align" ) + { + lcl_convertTextAlignmentToParaAdjustment( aValue ); + } + else if ( aFormsName == "VerticalAlign" ) + { + convertVerticalAlignToVerticalAdjust( aValue ); + } + } + } + + return aValue; + } + else + { + return SvxShape::getPropertyValue( aPropertyName ); + } + +} + +// XPropertyState +beans::PropertyState SAL_CALL SvxShapeControl::getPropertyState( const OUString& PropertyName ) +{ + OUString aFormsName; + if ( lcl_convertPropertyName( PropertyName, aFormsName ) ) + { + uno::Reference< beans::XPropertyState > xControl( getControl(), uno::UNO_QUERY ); + uno::Reference< beans::XPropertySet > xPropSet( getControl(), uno::UNO_QUERY ); + + if( xControl.is() && xPropSet.is() ) + { + uno::Reference< beans::XPropertySetInfo > xInfo( xPropSet->getPropertySetInfo() ); + if( xInfo.is() && xInfo->hasPropertyByName( aFormsName ) ) + { + return xControl->getPropertyState( aFormsName ); + } + } + + return beans::PropertyState_DEFAULT_VALUE; + } + else + { + return SvxShape::getPropertyState( PropertyName ); + } +} + +void SAL_CALL SvxShapeControl::setPropertyToDefault( const OUString& PropertyName ) +{ + OUString aFormsName; + if ( lcl_convertPropertyName( PropertyName, aFormsName ) ) + { + uno::Reference< beans::XPropertyState > xControl( getControl(), uno::UNO_QUERY ); + uno::Reference< beans::XPropertySet > xPropSet( getControl(), uno::UNO_QUERY ); + + if( xControl.is() && xPropSet.is() ) + { + uno::Reference< beans::XPropertySetInfo > xInfo( xPropSet->getPropertySetInfo() ); + if( xInfo.is() && xInfo->hasPropertyByName( aFormsName ) ) + { + xControl->setPropertyToDefault( aFormsName ); + } + } + } + else + { + SvxShape::setPropertyToDefault( PropertyName ); + } +} + +uno::Any SAL_CALL SvxShapeControl::getPropertyDefault( const OUString& aPropertyName ) +{ + OUString aFormsName; + if ( lcl_convertPropertyName( aPropertyName, aFormsName ) ) + { + uno::Reference< beans::XPropertyState > xControl( getControl(), uno::UNO_QUERY ); + + if( xControl.is() ) + { + Any aDefault( xControl->getPropertyDefault( aFormsName ) ); + if ( aFormsName == "FontSlant" ) + { + sal_Int16 nSlant( 0 ); + aDefault >>= nSlant; + aDefault <<= static_cast<awt::FontSlant>(nSlant); + } + else if ( aFormsName == "Align" ) + { + lcl_convertTextAlignmentToParaAdjustment( aDefault ); + } + else if ( aFormsName == "VerticalAlign" ) + { + convertVerticalAlignToVerticalAdjust( aDefault ); + } + return aDefault; + } + + throw beans::UnknownPropertyException( aPropertyName, static_cast<cppu::OWeakObject*>(this)); + } + else + { + return SvxShape::getPropertyDefault( aPropertyName ); + } +} + +SvxShapeDimensioning::SvxShapeDimensioning(SdrObject* pObj) + : SvxShapeText( pObj, getSvxMapProvider().GetMap(SVXMAP_DIMENSIONING), getSvxMapProvider().GetPropertySet(SVXMAP_DIMENSIONING, SdrObject::GetGlobalDrawObjectItemPool()) ) +{ +} + +SvxShapeDimensioning::~SvxShapeDimensioning() throw() +{ +} + +SvxShapeCircle::SvxShapeCircle(SdrObject* pObj) + : SvxShapeText( pObj, getSvxMapProvider().GetMap(SVXMAP_CIRCLE), getSvxMapProvider().GetPropertySet(SVXMAP_CIRCLE, SdrObject::GetGlobalDrawObjectItemPool()) ) +{ +} + +SvxShapeCircle::~SvxShapeCircle() throw() +{ +} + +////////////////////////////////////////////////////////////////////////////// + +SvxShapePolyPolygon::SvxShapePolyPolygon( + SdrObject* pObj) +: SvxShapeText( + pObj, + getSvxMapProvider().GetMap(SVXMAP_POLYPOLYGON), + getSvxMapProvider().GetPropertySet(SVXMAP_POLYPOLYGON, SdrObject::GetGlobalDrawObjectItemPool())) +{ +} + +SvxShapePolyPolygon::~SvxShapePolyPolygon() throw() +{ +} + +bool SvxShapePolyPolygon::setPropertyValueImpl( const OUString& rName, const SfxItemPropertySimpleEntry* pProperty, const css::uno::Any& rValue ) +{ + switch( pProperty->nWID ) + { + case OWN_ATTR_VALUE_POLYPOLYGONBEZIER: + { + if( auto s = o3tl::tryAccess<drawing::PolyPolygonBezierCoords>(rValue) ) + { + basegfx::B2DPolyPolygon aNewPolyPolygon( + basegfx::utils::UnoPolyPolygonBezierCoordsToB2DPolyPolygon(*s)); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + ForceMetricToItemPoolMetric(aNewPolyPolygon); + + SetPolygon(aNewPolyPolygon); + return true; + } + break; + } + case OWN_ATTR_VALUE_POLYPOLYGON: + { + if( auto s = o3tl::tryAccess<drawing::PointSequenceSequence>(rValue) ) + { + basegfx::B2DPolyPolygon aNewPolyPolygon( + basegfx::utils::UnoPointSequenceSequenceToB2DPolyPolygon(*s)); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + ForceMetricToItemPoolMetric(aNewPolyPolygon); + + SetPolygon(aNewPolyPolygon); + return true; + } + break; + } + case OWN_ATTR_BASE_GEOMETRY: + { + drawing::PointSequenceSequence aPointSequenceSequence; + drawing::PolyPolygonBezierCoords aPolyPolygonBezierCoords; + + if( rValue >>= aPointSequenceSequence) + { + if( HasSdrObject() ) + { + basegfx::B2DPolyPolygon aNewPolyPolygon; + basegfx::B2DHomMatrix aNewHomogenMatrix; + + GetSdrObject()->TRGetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon); + aNewPolyPolygon = basegfx::utils::UnoPointSequenceSequenceToB2DPolyPolygon(aPointSequenceSequence); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + // Need to adapt aNewPolyPolygon from 100thmm to app-specific + ForceMetricToItemPoolMetric(aNewPolyPolygon); + + GetSdrObject()->TRSetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon); + } + return true; + } + else if( rValue >>= aPolyPolygonBezierCoords) + { + if( HasSdrObject() ) + { + basegfx::B2DPolyPolygon aNewPolyPolygon; + basegfx::B2DHomMatrix aNewHomogenMatrix; + + GetSdrObject()->TRGetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon); + aNewPolyPolygon = basegfx::utils::UnoPolyPolygonBezierCoordsToB2DPolyPolygon(aPolyPolygonBezierCoords); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + ForceMetricToItemPoolMetric(aNewPolyPolygon); + + GetSdrObject()->TRSetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon); + } + return true; + } + break; + } + case OWN_ATTR_VALUE_POLYGON: + { + if( auto pSequence = o3tl::tryAccess<drawing::PointSequence>(rValue) ) + { + // prepare new polygon + basegfx::B2DPolygon aNewPolygon; + + // get pointer to arrays + const awt::Point* pArray = pSequence->getConstArray(); + const awt::Point* pArrayEnd = pArray + pSequence->getLength(); + + for(;pArray != pArrayEnd;++pArray) + { + aNewPolygon.append(basegfx::B2DPoint(pArray->X, pArray->Y)); + } + + // check for closed state flag + basegfx::utils::checkClosed(aNewPolygon); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + basegfx::B2DPolyPolygon aNewPolyPolygon(aNewPolygon); + ForceMetricToItemPoolMetric(aNewPolyPolygon); + + // set polygon + SetPolygon(aNewPolyPolygon); + return true; + } + break; + } + default: + return SvxShapeText::setPropertyValueImpl( rName, pProperty, rValue ); + } + + throw lang::IllegalArgumentException(); +} + +bool SvxShapePolyPolygon::getPropertyValueImpl( const OUString& rName, const SfxItemPropertySimpleEntry* pProperty, + css::uno::Any& rValue ) +{ + switch( pProperty->nWID ) + { + case OWN_ATTR_VALUE_POLYPOLYGONBEZIER: + { + // pack a tools::PolyPolygon in a struct tools::PolyPolygon + basegfx::B2DPolyPolygon aPolyPoly(GetPolygon()); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + ForceMetricTo100th_mm(aPolyPoly); + + drawing::PolyPolygonBezierCoords aRetval; + basegfx::utils::B2DPolyPolygonToUnoPolyPolygonBezierCoords(aPolyPoly, aRetval); + + rValue <<= aRetval; + break; + } + case OWN_ATTR_VALUE_POLYPOLYGON: + { + // pack a tools::PolyPolygon in a struct tools::PolyPolygon + basegfx::B2DPolyPolygon aPolyPoly(GetPolygon()); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + ForceMetricTo100th_mm(aPolyPoly); + + drawing::PointSequenceSequence aRetval( aPolyPoly.count() ); + basegfx::utils::B2DPolyPolygonToUnoPointSequenceSequence(aPolyPoly, aRetval); + + rValue <<= aRetval; + break; + } + case OWN_ATTR_BASE_GEOMETRY: + { + // pack a tools::PolyPolygon in struct PolyPolygon + basegfx::B2DPolyPolygon aPolyPoly; + basegfx::B2DHomMatrix aNewHomogenMatrix; + + if(HasSdrObject()) + { + GetSdrObject()->TRGetBaseGeometry(aNewHomogenMatrix, aPolyPoly); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + ForceMetricTo100th_mm(aPolyPoly); + } + + if(aPolyPoly.areControlPointsUsed()) + { + drawing::PolyPolygonBezierCoords aRetval; + basegfx::utils::B2DPolyPolygonToUnoPolyPolygonBezierCoords(aPolyPoly, aRetval); + rValue <<= aRetval; + } + else + { + drawing::PointSequenceSequence aRetval(aPolyPoly.count()); + basegfx::utils::B2DPolyPolygonToUnoPointSequenceSequence(aPolyPoly, aRetval); + rValue <<= aRetval; + } + break; + } + case OWN_ATTR_VALUE_POLYGON: + { + // pack a tools::PolyPolygon in a struct tools::PolyPolygon + basegfx::B2DPolyPolygon aPolyPoly(GetPolygon()); + + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + ForceMetricTo100th_mm(aPolyPoly); + + const sal_Int32 nCount(0 == aPolyPoly.count() ? 0 : aPolyPoly.getB2DPolygon(0).count()); + drawing::PointSequence aRetval( nCount ); + + if( nCount > 0 ) + { + // get single polygon + const basegfx::B2DPolygon& aPoly(aPolyPoly.getB2DPolygon(0)); + + // get pointer to arrays + awt::Point* pSequence = aRetval.getArray(); + + for(sal_Int32 b=0;b<nCount;b++) + { + const basegfx::B2DPoint aPoint(aPoly.getB2DPoint(b)); + *pSequence++ = awt::Point( basegfx::fround(aPoint.getX()), basegfx::fround(aPoint.getY()) ); + } + } + + rValue <<= aRetval; + break; + } + case OWN_ATTR_VALUE_POLYGONKIND: + { + rValue <<= GetPolygonKind(); + break; + } + default: + return SvxShapeText::getPropertyValueImpl( rName, pProperty, rValue ); + } + + return true; +} + +drawing::PolygonKind SvxShapePolyPolygon::GetPolygonKind() const +{ + ::SolarMutexGuard aGuard; + drawing::PolygonKind aRetval(drawing::PolygonKind_LINE); + + if(HasSdrObject()) + { + switch(GetSdrObject()->GetObjIdentifier()) + { + case OBJ_POLY: aRetval = drawing::PolygonKind_POLY; break; + case OBJ_PLIN: aRetval = drawing::PolygonKind_PLIN; break; + case OBJ_SPLNLINE: + case OBJ_PATHLINE: aRetval = drawing::PolygonKind_PATHLINE; break; + case OBJ_SPLNFILL: + case OBJ_PATHFILL: aRetval = drawing::PolygonKind_PATHFILL; break; + case OBJ_FREELINE: aRetval = drawing::PolygonKind_FREELINE; break; + case OBJ_FREEFILL: aRetval = drawing::PolygonKind_FREEFILL; break; + } + } + + return aRetval; +} + +void SvxShapePolyPolygon::SetPolygon(const basegfx::B2DPolyPolygon& rNew) +{ + ::SolarMutexGuard aGuard; + + if(HasSdrObject()) + static_cast<SdrPathObj*>(GetSdrObject())->SetPathPoly(rNew); +} + + +basegfx::B2DPolyPolygon SvxShapePolyPolygon::GetPolygon() const throw() +{ + ::SolarMutexGuard aGuard; + + if(HasSdrObject()) + { + return static_cast<SdrPathObj*>(GetSdrObject())->GetPathPoly(); + } + else + { + return basegfx::B2DPolyPolygon(); + } +} + +////////////////////////////////////////////////////////////////////////////// + +SvxGraphicObject::SvxGraphicObject(SdrObject* pObj) + : SvxShapeText( pObj, getSvxMapProvider().GetMap(SVXMAP_GRAPHICOBJECT), getSvxMapProvider().GetPropertySet(SVXMAP_GRAPHICOBJECT, SdrObject::GetGlobalDrawObjectItemPool()) ) +{ +} + +SvxGraphicObject::~SvxGraphicObject() throw() +{ +} + +bool SvxGraphicObject::setPropertyValueImpl( const OUString& rName, const SfxItemPropertySimpleEntry* pProperty, const css::uno::Any& rValue ) +{ + bool bOk = false; + switch( pProperty->nWID ) + { + case OWN_ATTR_VALUE_FILLBITMAP: + { + if( auto pSeq = o3tl::tryAccess<uno::Sequence<sal_Int8>>(rValue) ) + { + SvMemoryStream aMemStm; + Graphic aGraphic; + + aMemStm.SetBuffer( const_cast<css::uno::Sequence<sal_Int8> *>(pSeq)->getArray(), pSeq->getLength(), pSeq->getLength() ); + + if( GraphicConverter::Import( aMemStm, aGraphic ) == ERRCODE_NONE ) + { + static_cast<SdrGrafObj*>(GetSdrObject())->SetGraphic(aGraphic); + bOk = true; + } + } + else if (rValue.getValueType() == cppu::UnoType<graphic::XGraphic>::get()) + { + auto xGraphic = rValue.get<uno::Reference<graphic::XGraphic>>(); + if (xGraphic.is()) + { + static_cast<SdrGrafObj*>(GetSdrObject())->SetGraphic(Graphic(xGraphic)); + bOk = true; + } + } + else if (rValue.getValueType() == cppu::UnoType<awt::XBitmap>::get()) + { + auto xBitmap = rValue.get<uno::Reference<awt::XBitmap>>(); + if (xBitmap.is()) + { + uno::Reference<graphic::XGraphic> xGraphic(xBitmap, uno::UNO_QUERY); + Graphic aGraphic(xGraphic); + static_cast<SdrGrafObj*>(GetSdrObject())->SetGraphic(aGraphic); + bOk = true; + } + } + break; + } + + case OWN_ATTR_GRAFSTREAMURL: + { + OUString aStreamURL; + + if( rValue >>= aStreamURL ) + { + if( !aStreamURL.startsWith( UNO_NAME_GRAPHOBJ_URLPKGPREFIX ) ) + aStreamURL.clear(); + + if( HasSdrObject() ) + { + static_cast<SdrGrafObj*>(GetSdrObject())->SetGrafStreamURL( aStreamURL ); + } + bOk = true; + } + break; + } + + case OWN_ATTR_GRAPHIC_URL: + { + OUString aURL; + uno::Reference<awt::XBitmap> xBitmap; + if (rValue >>= aURL) + { + Graphic aGraphic = vcl::graphic::loadFromURL(aURL); + if (!aGraphic.IsNone()) + { + static_cast<SdrGrafObj*>(GetSdrObject())->SetGraphic(aGraphic); + bOk = true; + } + } + else if (rValue >>= xBitmap) + { + uno::Reference<graphic::XGraphic> xGraphic(xBitmap, uno::UNO_QUERY); + if (xGraphic.is()) + { + Graphic aGraphic = xGraphic; + if (!aGraphic.IsNone()) + { + static_cast<SdrGrafObj*>(GetSdrObject())->SetGraphic(aGraphic); + bOk = true; + } + } + } + break; + } + + case OWN_ATTR_VALUE_GRAPHIC: + { + Reference< graphic::XGraphic > xGraphic( rValue, uno::UNO_QUERY ); + if( xGraphic.is() ) + { + static_cast< SdrGrafObj*>( GetSdrObject() )->SetGraphic( xGraphic ); + bOk = true; + } + break; + } + + case OWN_ATTR_IS_SIGNATURELINE: + { + bool bIsSignatureLine; + if (rValue >>= bIsSignatureLine) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setIsSignatureLine(bIsSignatureLine); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_ID: + { + OUString aSignatureLineId; + if (rValue >>= aSignatureLineId) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineId(aSignatureLineId); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_SUGGESTED_SIGNER_NAME: + { + OUString aSuggestedSignerName; + if (rValue >>= aSuggestedSignerName) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineSuggestedSignerName(aSuggestedSignerName); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_SUGGESTED_SIGNER_TITLE: + { + OUString aSuggestedSignerTitle; + if (rValue >>= aSuggestedSignerTitle) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineSuggestedSignerTitle(aSuggestedSignerTitle); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_SUGGESTED_SIGNER_EMAIL: + { + OUString aSuggestedSignerEmail; + if (rValue >>= aSuggestedSignerEmail) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineSuggestedSignerEmail(aSuggestedSignerEmail); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_SIGNING_INSTRUCTIONS: + { + OUString aSigningInstructions; + if (rValue >>= aSigningInstructions) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineSigningInstructions(aSigningInstructions); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_SHOW_SIGN_DATE: + { + bool bShowSignDate; + if (rValue >>= bShowSignDate) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineShowSignDate(bShowSignDate); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_CAN_ADD_COMMENT: + { + bool bCanAddComment; + if (rValue >>= bCanAddComment) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineCanAddComment(bCanAddComment); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_UNSIGNED_IMAGE: + { + Reference<graphic::XGraphic> xGraphic(rValue, uno::UNO_QUERY); + if (xGraphic.is()) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineUnsignedGraphic(xGraphic); + bOk = true; + } + break; + } + + case OWN_ATTR_SIGNATURELINE_IS_SIGNED: + { + bool bIsSigned; + if (rValue >>= bIsSigned) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setSignatureLineIsSigned(bIsSigned); + bOk = true; + } + break; + } + + case OWN_ATTR_QRCODE: + { + css::drawing::QRCode aQrCode; + if (rValue >>= aQrCode) + { + static_cast<SdrGrafObj*>(GetSdrObject())->setQrCode(aQrCode); + bOk = true; + } + break; + } + + default: + return SvxShapeText::setPropertyValueImpl( rName, pProperty, rValue ); + } + + if( !bOk ) + throw lang::IllegalArgumentException(); + + GetSdrObject()->getSdrModelFromSdrObject().SetChanged(); + + return true; +} + +bool SvxGraphicObject::getPropertyValueImpl( const OUString& rName, const SfxItemPropertySimpleEntry* pProperty, css::uno::Any& rValue ) +{ + switch( pProperty->nWID ) + { + case OWN_ATTR_VALUE_FILLBITMAP: + { + const Graphic& rGraphic = static_cast<SdrGrafObj*>(GetSdrObject())->GetGraphic(); + + if (rGraphic.GetType() != GraphicType::GdiMetafile) + { + uno::Reference<awt::XBitmap> xBitmap(rGraphic.GetXGraphic(), uno::UNO_QUERY); + rValue <<= xBitmap; + } + else + { + SvMemoryStream aDestStrm( 65535, 65535 ); + + ConvertGDIMetaFileToWMF( rGraphic.GetGDIMetaFile(), aDestStrm, nullptr, false ); + const uno::Sequence<sal_Int8> aSeq( + static_cast< const sal_Int8* >(aDestStrm.GetData()), + aDestStrm.GetEndOfData()); + rValue <<= aSeq; + } + break; + } + + case OWN_ATTR_REPLACEMENT_GRAPHIC: + { + const GraphicObject* pGrafObj = static_cast< SdrGrafObj* >(GetSdrObject())->GetReplacementGraphicObject(); + + if (pGrafObj) + { + rValue <<= pGrafObj->GetGraphic().GetXGraphic(); + } + + break; + } + + case OWN_ATTR_GRAFSTREAMURL: + { + const OUString aStreamURL( static_cast<SdrGrafObj*>( GetSdrObject() )->GetGrafStreamURL() ); + if( !aStreamURL.isEmpty() ) + rValue <<= aStreamURL; + break; + } + + case OWN_ATTR_GRAPHIC_URL: + case OWN_ATTR_VALUE_GRAPHIC: + { + if (pProperty->nWID == OWN_ATTR_GRAPHIC_URL) + { + SAL_WARN("svx", "Getting Graphic by URL is not supported, getting it by value"); + } + + Reference<graphic::XGraphic> xGraphic; + auto pSdrGraphicObject = static_cast<SdrGrafObj*>(GetSdrObject()); + if (pSdrGraphicObject->GetGraphicObject().GetType() != GraphicType::NONE) + xGraphic = pSdrGraphicObject->GetGraphic().GetXGraphic(); + rValue <<= xGraphic; + break; + } + + case OWN_ATTR_GRAPHIC_STREAM: + { + rValue <<= static_cast< SdrGrafObj* >( GetSdrObject() )->getInputStream(); + break; + } + + case OWN_ATTR_IS_SIGNATURELINE: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->isSignatureLine(); + break; + } + + case OWN_ATTR_SIGNATURELINE_ID: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->getSignatureLineId(); + break; + } + + case OWN_ATTR_SIGNATURELINE_SUGGESTED_SIGNER_NAME: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->getSignatureLineSuggestedSignerName(); + break; + } + + case OWN_ATTR_SIGNATURELINE_SUGGESTED_SIGNER_TITLE: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->getSignatureLineSuggestedSignerTitle(); + break; + } + + case OWN_ATTR_SIGNATURELINE_SUGGESTED_SIGNER_EMAIL: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->getSignatureLineSuggestedSignerEmail(); + break; + } + + case OWN_ATTR_SIGNATURELINE_SIGNING_INSTRUCTIONS: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->getSignatureLineSigningInstructions(); + break; + } + + case OWN_ATTR_SIGNATURELINE_SHOW_SIGN_DATE: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->isSignatureLineShowSignDate(); + break; + } + + case OWN_ATTR_SIGNATURELINE_CAN_ADD_COMMENT: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->isSignatureLineCanAddComment(); + break; + } + + case OWN_ATTR_SIGNATURELINE_UNSIGNED_IMAGE: + { + Reference<graphic::XGraphic> xGraphic( + static_cast<SdrGrafObj*>(GetSdrObject())->getSignatureLineUnsignedGraphic()); + rValue <<= xGraphic; + break; + } + + case OWN_ATTR_SIGNATURELINE_IS_SIGNED: + { + rValue <<= static_cast<SdrGrafObj*>(GetSdrObject())->isSignatureLineSigned(); + break; + } + + case OWN_ATTR_QRCODE: + { + css::drawing::QRCode* ptr = static_cast<SdrGrafObj*>(GetSdrObject())->getQrCode(); + if(ptr) + { + rValue <<= *ptr; + } + break; + } + + default: + return SvxShapeText::getPropertyValueImpl(rName, pProperty,rValue); + } + + return true; +} + + +SvxShapeCaption::SvxShapeCaption(SdrObject* pObj) +: SvxShapeText( pObj, getSvxMapProvider().GetMap(SVXMAP_CAPTION), getSvxMapProvider().GetPropertySet(SVXMAP_CAPTION, SdrObject::GetGlobalDrawObjectItemPool()) ) +{ +} + +SvxShapeCaption::~SvxShapeCaption() throw() +{ +} + +SvxCustomShape::SvxCustomShape(SdrObject* pObj) + : SvxShapeText( pObj, getSvxMapProvider().GetMap( SVXMAP_CUSTOMSHAPE ), getSvxMapProvider().GetPropertySet(SVXMAP_CUSTOMSHAPE, SdrObject::GetGlobalDrawObjectItemPool()) ) +{ +} + +SvxCustomShape::~SvxCustomShape() throw() +{ +} + +uno::Any SAL_CALL SvxCustomShape::queryInterface( const uno::Type & rType ) +{ + return SvxShapeText::queryInterface( rType ); +} + +uno::Any SAL_CALL SvxCustomShape::queryAggregation( const uno::Type & rType ) +{ + css::uno::Any aReturn = SvxShapeText::queryAggregation( rType ); + if ( !aReturn.hasValue() ) + aReturn = ::cppu::queryInterface(rType, static_cast<drawing::XEnhancedCustomShapeDefaulter*>(this) ); + return aReturn; +} + +uno::Sequence< uno::Type > SAL_CALL SvxCustomShape::getTypes() +{ + return SvxShapeText::getTypes(); +} + +uno::Sequence< sal_Int8 > SAL_CALL SvxCustomShape::getImplementationId() +{ + return css::uno::Sequence<sal_Int8>(); +} + +// css::drawing::XShape + + +awt::Point SAL_CALL SvxCustomShape::getPosition() +{ + ::SolarMutexGuard aGuard; + if ( HasSdrObject() ) + { + SdrAShapeObjGeoData aCustomShapeGeoData; + static_cast<SdrObjCustomShape*>(GetSdrObject())->SaveGeoData( aCustomShapeGeoData ); + + bool bMirroredX = false; + bool bMirroredY = false; + + if ( HasSdrObject() ) + { + bMirroredX = static_cast<SdrObjCustomShape*>(GetSdrObject())->IsMirroredX(); + bMirroredY = static_cast<SdrObjCustomShape*>(GetSdrObject())->IsMirroredY(); + } + // get aRect, this is the unrotated snaprect + tools::Rectangle aRect(static_cast<SdrObjCustomShape*>(GetSdrObject())->GetLogicRect()); + tools::Rectangle aRectangle( aRect ); + + if ( bMirroredX || bMirroredY ) + { // we have to retrieve the unmirrored rect + + GeoStat aNewGeo( aCustomShapeGeoData.aGeo ); + if ( bMirroredX ) + { + tools::Polygon aPol( Rect2Poly( aRect, aNewGeo ) ); + tools::Rectangle aBoundRect( aPol.GetBoundRect() ); + + Point aRef1( ( aBoundRect.Left() + aBoundRect.Right() ) >> 1, aBoundRect.Top() ); + Point aRef2( aRef1.X(), aRef1.Y() + 1000 ); + sal_uInt16 i; + sal_uInt16 nPointCount=aPol.GetSize(); + for (i=0; i<nPointCount; i++) + { + MirrorPoint(aPol[i],aRef1,aRef2); + } + // turn and move polygon + tools::Polygon aPol0(aPol); + aPol[0]=aPol0[1]; + aPol[1]=aPol0[0]; + aPol[2]=aPol0[3]; + aPol[3]=aPol0[2]; + aPol[4]=aPol0[1]; + Poly2Rect(aPol,aRectangle,aNewGeo); + } + if ( bMirroredY ) + { + tools::Polygon aPol( Rect2Poly( aRectangle, aNewGeo ) ); + tools::Rectangle aBoundRect( aPol.GetBoundRect() ); + + Point aRef1( aBoundRect.Left(), ( aBoundRect.Top() + aBoundRect.Bottom() ) >> 1 ); + Point aRef2( aRef1.X() + 1000, aRef1.Y() ); + sal_uInt16 i; + sal_uInt16 nPointCount=aPol.GetSize(); + for (i=0; i<nPointCount; i++) + { + MirrorPoint(aPol[i],aRef1,aRef2); + } + // turn and move polygon + tools::Polygon aPol0(aPol); + aPol[0]=aPol0[1]; + aPol[1]=aPol0[0]; + aPol[2]=aPol0[3]; + aPol[3]=aPol0[2]; + aPol[4]=aPol0[1]; + Poly2Rect( aPol, aRectangle, aNewGeo ); + } + } + Point aPt( aRectangle.TopLeft() ); + + if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() ) + aPt -= GetSdrObject()->GetAnchorPos(); + + ForceMetricTo100th_mm(aPt); + return css::awt::Point( aPt.X(), aPt.Y() ); + } + else + return SvxShape::getPosition(); +} + + +void SAL_CALL SvxCustomShape::setPropertyValue( const OUString& aPropertyName, const uno::Any& aValue ) +{ + ::SolarMutexGuard aGuard; + + SdrObject* pObject = GetSdrObject(); + + // tdf#98163 Use a custom slot to have filter code flush the UNO + // API implementations of SdrObjCustomShape. Used e.g. by + // ~SdXMLCustomShapeContext, see there for more information + const OUString sFlushCustomShapeUnoApiObjects("FlushCustomShapeUnoApiObjects"); + if(sFlushCustomShapeUnoApiObjects == aPropertyName) + { + SdrObjCustomShape* pTarget = dynamic_cast< SdrObjCustomShape* >(pObject); + if(pTarget) + { + // Luckily, the object causing problems in tdf#93994 is not the + // UNO API object, but the XCustomShapeEngine involved. This + // object is on-demand replaceable and can be reset here. This + // will free the involved EditEngine and VirtualDevice. + pTarget->mxCustomShapeEngine.set(nullptr); + } + // since this case is only for the application cores + // we should return from this function now + return; + } + + bool bCustomShapeGeometry = pObject && aPropertyName == "CustomShapeGeometry"; + + bool bMirroredX = false; + bool bMirroredY = false; + + if ( bCustomShapeGeometry ) + { + bMirroredX = static_cast<SdrObjCustomShape*>(pObject)->IsMirroredX(); + bMirroredY = static_cast<SdrObjCustomShape*>(pObject)->IsMirroredY(); + } + + SvxShape::setPropertyValue( aPropertyName, aValue ); + + if ( bCustomShapeGeometry ) + { + static_cast<SdrObjCustomShape*>(pObject)->MergeDefaultAttributes(); + tools::Rectangle aRect( pObject->GetSnapRect() ); + + // #i38892# + bool bNeedsMirrorX = static_cast<SdrObjCustomShape*>(pObject)->IsMirroredX() != bMirroredX; + bool bNeedsMirrorY = static_cast<SdrObjCustomShape*>(pObject)->IsMirroredY() != bMirroredY; + + std::unique_ptr< SdrGluePointList > pListCopy; + if( bNeedsMirrorX || bNeedsMirrorY ) + { + const SdrGluePointList* pList = pObject->GetGluePointList(); + if( pList ) + pListCopy.reset( new SdrGluePointList(*pList) ); + } + + if ( bNeedsMirrorX ) + { + Point aTop( ( aRect.Left() + aRect.Right() ) >> 1, aRect.Top() ); + Point aBottom( aTop.X(), aTop.Y() + 1000 ); + pObject->NbcMirror( aTop, aBottom ); + // NbcMirroring is flipping the current mirror state, + // so we have to set the correct state again + static_cast<SdrObjCustomShape*>(pObject)->SetMirroredX( !bMirroredX ); + } + if ( bNeedsMirrorY ) + { + Point aLeft( aRect.Left(), ( aRect.Top() + aRect.Bottom() ) >> 1 ); + Point aRight( aLeft.X() + 1000, aLeft.Y() ); + pObject->NbcMirror( aLeft, aRight ); + // NbcMirroring is flipping the current mirror state, + // so we have to set the correct state again + static_cast<SdrObjCustomShape*>(pObject)->SetMirroredY( !bMirroredY ); + } + + if( pListCopy ) + { + SdrGluePointList* pNewList = const_cast< SdrGluePointList* >( pObject->GetGluePointList() ); + if(pNewList) + *pNewList = *pListCopy; + } + } +} + +bool SvxCustomShape::getPropertyValueImpl( const OUString& rName, const SfxItemPropertySimpleEntry* pProperty, css::uno::Any& rValue ) +{ + switch( pProperty->nWID ) + { + case SDRATTR_ROTATEANGLE: + { + double fAngle = static_cast<SdrObjCustomShape*>(GetSdrObject())->GetObjectRotation(); + fAngle *= 100; + rValue <<= static_cast<sal_Int32>(fAngle); + return true; + } + default: + return SvxShape::getPropertyValueImpl( rName, pProperty, rValue ); + } +} + +void SvxCustomShape::createCustomShapeDefaults( const OUString& rValueType ) +{ + if (!HasSdrObject()) + { + OSL_FAIL("could not create Custom Shape Defaults!"); + return; + } + + static_cast<SdrObjCustomShape*>(GetSdrObject())->MergeDefaultAttributes( &rValueType ); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |