diff options
Diffstat (limited to '')
| -rw-r--r-- | vcl/source/window/printdlg.cxx | 2239 |
1 files changed, 2239 insertions, 0 deletions
diff --git a/vcl/source/window/printdlg.cxx b/vcl/source/window/printdlg.cxx new file mode 100644 index 000000000..6d73b1449 --- /dev/null +++ b/vcl/source/window/printdlg.cxx @@ -0,0 +1,2239 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <printdlg.hxx> +#include <svdata.hxx> +#include <strings.hrc> +#include <bitmaps.hlst> + +#include <vcl/commandevent.hxx> +#include <vcl/naturalsort.hxx> +#include <vcl/print.hxx> +#include <vcl/wall.hxx> +#include <vcl/decoview.hxx> +#include <configsettings.hxx> +#include <vcl/help.hxx> +#include <vcl/svapp.hxx> +#include <vcl/settings.hxx> +#include <vcl/virdev.hxx> + +#include <unotools/localedatawrapper.hxx> + +#include <sal/log.hxx> +#include <osl/diagnose.h> +#include <rtl/ustrbuf.hxx> + +#include <com/sun/star/beans/PropertyValue.hpp> + +using namespace vcl; +using namespace com::sun::star; +using namespace com::sun::star::uno; +using namespace com::sun::star::lang; +using namespace com::sun::star::container; +using namespace com::sun::star::beans; + +enum +{ + ORIENTATION_AUTOMATIC, + ORIENTATION_PORTRAIT, + ORIENTATION_LANDSCAPE +}; + +namespace { + bool lcl_ListBoxCompare( const OUString& rStr1, const OUString& rStr2 ) + { + return vcl::NaturalSortCompare( rStr1, rStr2 ) < 0; + } +} + +MoreOptionsDialog::MoreOptionsDialog(PrintDialog* i_pParent) + : GenericDialogController(i_pParent->getDialog(), "vcl/ui/moreoptionsdialog.ui", "MoreOptionsDialog") + , mpParent( i_pParent ) + , mxOKButton(m_xBuilder->weld_button("ok")) + , mxCancelButton(m_xBuilder->weld_button("cancel")) + , mxSingleJobsBox(m_xBuilder->weld_check_button("singlejobs")) +{ + mxSingleJobsBox->set_active( mpParent->isSingleJobs() ); + + mxOKButton->connect_clicked( LINK( this, MoreOptionsDialog, ClickHdl ) ); + mxCancelButton->connect_clicked( LINK( this, MoreOptionsDialog, ClickHdl ) ); +} + +MoreOptionsDialog::~MoreOptionsDialog() +{ +} + +IMPL_LINK (MoreOptionsDialog, ClickHdl, weld::Button&, rButton, void) +{ + if (&rButton == mxOKButton.get()) + { + mpParent->mbSingleJobs = mxSingleJobsBox->get_active(); + m_xDialog->response(RET_OK); + } + else if (&rButton == mxCancelButton.get()) + { + m_xDialog->response(RET_CANCEL); + } +} + +PrintDialog::PrintPreviewWindow::PrintPreviewWindow(PrintDialog* pDialog) + : mpDialog(pDialog) + , maMtf() + , maOrigSize( 10, 10 ) + , maPreviewSize() + , mnDPIX(Application::GetDefaultDevice()->GetDPIX()) + , mnDPIY(Application::GetDefaultDevice()->GetDPIY()) + , maPreviewBitmap() + , maReplacementString() + , mbGreyscale( false ) +{ +} + +PrintDialog::PrintPreviewWindow::~PrintPreviewWindow() +{ +} + +void PrintDialog::PrintPreviewWindow::Resize() +{ + Size aNewSize(GetOutputSizePixel()); + long nTextHeight = GetDrawingArea()->get_text_height(); + // leave small space for decoration + aNewSize.AdjustWidth( -(nTextHeight + 2) ); + aNewSize.AdjustHeight( -(nTextHeight + 2) ); + Size aScaledSize; + double fScale = 1.0; + + // #i106435# catch corner case of Size(0,0) + Size aOrigSize( maOrigSize ); + if( aOrigSize.Width() < 1 ) + aOrigSize.setWidth( aNewSize.Width() ); + if( aOrigSize.Height() < 1 ) + aOrigSize.setHeight( aNewSize.Height() ); + if( aOrigSize.Width() > aOrigSize.Height() ) + { + aScaledSize = Size( aNewSize.Width(), aNewSize.Width() * aOrigSize.Height() / aOrigSize.Width() ); + if( aScaledSize.Height() > aNewSize.Height() ) + fScale = double(aNewSize.Height())/double(aScaledSize.Height()); + } + else + { + aScaledSize = Size( aNewSize.Height() * aOrigSize.Width() / aOrigSize.Height(), aNewSize.Height() ); + if( aScaledSize.Width() > aNewSize.Width() ) + fScale = double(aNewSize.Width())/double(aScaledSize.Width()); + } + aScaledSize.setWidth( long(aScaledSize.Width()*fScale) ); + aScaledSize.setHeight( long(aScaledSize.Height()*fScale) ); + + maPreviewSize = aScaledSize; + + // check and evtl. recreate preview bitmap + preparePreviewBitmap(); +} + +void PrintDialog::PrintPreviewWindow::SetDrawingArea(weld::DrawingArea* pDrawingArea) +{ + pDrawingArea->set_size_request(pDrawingArea->get_approximate_digit_width() * 45, + pDrawingArea->get_text_height() * 30); + CustomWidgetController::SetDrawingArea(pDrawingArea); +} + +void PrintDialog::PrintPreviewWindow::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle&) +{ + rRenderContext.Push(); + if (vcl::Window* pDefaultDevice = dynamic_cast<vcl::Window*>(Application::GetDefaultDevice())) + { + Font aFont(rRenderContext.GetSettings().GetStyleSettings().GetLabelFont()); + pDefaultDevice->SetPointFont(rRenderContext, aFont); + } + + rRenderContext.SetBackground(Wallpaper(Application::GetSettings().GetStyleSettings().GetDialogColor())); + rRenderContext.Erase(); + + auto nTextHeight = rRenderContext.GetTextHeight(); + Size aSize(GetOutputSizePixel()); + Point aOffset((aSize.Width() - maPreviewSize.Width() + nTextHeight) / 2, + (aSize.Height() - maPreviewSize.Height() + nTextHeight) / 2); + + // horizontal line + { + auto nWidth = rRenderContext.GetTextWidth(maHorzText); + + auto nStart = aOffset.X() + (maPreviewSize.Width() - nWidth) / 2; + rRenderContext.DrawText(Point(nStart, aOffset.Y() - nTextHeight), maHorzText, 0, maHorzText.getLength()); + + DecorationView aDecoView(&rRenderContext); + auto nTop = aOffset.Y() - (nTextHeight / 2); + aDecoView.DrawSeparator(Point(aOffset.X(), nTop), Point(nStart - 2, nTop), false); + aDecoView.DrawSeparator(Point(nStart + nWidth + 2, nTop), Point(aOffset.X() + maPreviewSize.Width(), nTop), false); + } + + // vertical line + { + rRenderContext.Push(PushFlags::FONT); + vcl::Font aFont(rRenderContext.GetFont()); + aFont.SetOrientation(900); + rRenderContext.SetFont(aFont); + + auto nLeft = aOffset.X() - nTextHeight; + + auto nWidth = rRenderContext.GetTextWidth(maVertText); + auto nStart = aOffset.Y() + (maPreviewSize.Height() + nWidth) / 2; + + rRenderContext.DrawText(Point(nLeft, nStart), maVertText, 0, maVertText.getLength()); + + DecorationView aDecoView(&rRenderContext); + nLeft = aOffset.X() - (nTextHeight / 2); + aDecoView.DrawSeparator(Point(nLeft, aOffset.Y()), Point(nLeft, nStart - nWidth - 2), true); + aDecoView.DrawSeparator(Point(nLeft, nStart + 2), Point(nLeft, aOffset.Y() + maPreviewSize.Height()), true); + + rRenderContext.Pop(); + } + + if (!maReplacementString.isEmpty()) + { + // replacement is active + tools::Rectangle aTextRect(aOffset + Point(2, 2), Size(maPreviewSize.Width() - 4, maPreviewSize.Height() - 4)); + rRenderContext.DrawText(aTextRect, maReplacementString, + DrawTextFlags::Center | DrawTextFlags::VCenter | + DrawTextFlags::WordBreak | DrawTextFlags::MultiLine); + } + else + { + BitmapEx aPreviewBitmap(maPreviewBitmap); + + // This explicit force-to-scale allows us to get the + // mentioned best quality here. Unfortunately this is + // currently not sure when using just ::DrawBitmap with + // a defined size or ::DrawOutDev + aPreviewBitmap.Scale(maPreviewSize, BmpScaleFlag::BestQuality); + rRenderContext.DrawBitmapEx(aOffset, aPreviewBitmap); + } + + tools::Rectangle aFrameRect(aOffset + Point(-1, -1), Size(maPreviewSize.Width() + 2, maPreviewSize.Height() + 2)); + DecorationView aDecorationView(&rRenderContext); + aDecorationView.DrawFrame(aFrameRect, DrawFrameStyle::Group); + + rRenderContext.Pop(); +} + +bool PrintDialog::PrintPreviewWindow::Command( const CommandEvent& rEvt ) +{ + if( rEvt.GetCommand() == CommandEventId::Wheel ) + { + const CommandWheelData* pWheelData = rEvt.GetWheelData(); + if(pWheelData->GetDelta() > 0) + mpDialog->previewForward(); + else if (pWheelData->GetDelta() < 0) + mpDialog->previewBackward(); + return true; + } + return CustomWidgetController::Command(rEvt); +} + +void PrintDialog::PrintPreviewWindow::setPreview( const GDIMetaFile& i_rNewPreview, + const Size& i_rOrigSize, + const OUString& i_rPaperName, + const OUString& i_rReplacement, + sal_Int32 i_nDPIX, + sal_Int32 i_nDPIY, + bool i_bGreyscale + ) +{ + maMtf = i_rNewPreview; + mnDPIX = i_nDPIX; + mnDPIY = i_nDPIY; + maOrigSize = i_rOrigSize; + maReplacementString = i_rReplacement; + mbGreyscale = i_bGreyscale; + + // use correct measurements + const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper()); + MapUnit eUnit = MapUnit::MapMM; + int nDigits = 0; + if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US ) + { + eUnit = MapUnit::Map100thInch; + nDigits = 2; + } + Size aLogicPaperSize(OutputDevice::LogicToLogic(i_rOrigSize, MapMode(MapUnit::Map100thMM), MapMode(eUnit))); + OUString aNumText( rLocWrap.getNum( aLogicPaperSize.Width(), nDigits ) ); + OUStringBuffer aBuf; + aBuf.append( aNumText ) + .append( u' ' ); + aBuf.appendAscii( eUnit == MapUnit::MapMM ? "mm" : "in" ); + if( !i_rPaperName.isEmpty() ) + { + aBuf.append( " (" ); + aBuf.append( i_rPaperName ); + aBuf.append( ')' ); + } + maHorzText = aBuf.makeStringAndClear(); + + aNumText = rLocWrap.getNum( aLogicPaperSize.Height(), nDigits ); + aBuf.append( aNumText ) + .append( u' ' ); + aBuf.appendAscii( eUnit == MapUnit::MapMM ? "mm" : "in" ); + maVertText = aBuf.makeStringAndClear(); + + // We have a new Metafile and evtl. a new page, so we need to reset + // the PreviewBitmap to force new creation + maPreviewBitmap = Bitmap(); + + // sets/calculates e.g. maPreviewSize + // also triggers preparePreviewBitmap() + Resize(); + + Invalidate(); +} + +void PrintDialog::PrintPreviewWindow::preparePreviewBitmap() +{ + if(maPreviewSize.IsEmpty()) + { + // not yet fully initialized, no need to prepare anything + return; + } + + // define an allowed number of pixels, also see + // defaults for primitive renderers and similar. This + // might be centralized and made dependent of 32/64bit + const sal_uInt32 nMaxSquarePixels(500000); + + // check how big (squarePixels) the preview is currently (with + // max value of MaxSquarePixels) + const sal_uInt32 nCurrentSquarePixels( + std::min( + nMaxSquarePixels, + static_cast<sal_uInt32>(maPreviewBitmap.GetSizePixel().getWidth()) + * static_cast<sal_uInt32>(maPreviewBitmap.GetSizePixel().getHeight()))); + + // check how big (squarePixels) the preview needs to be (with + // max value of MaxSquarePixels) + const sal_uInt32 nRequiredSquarePixels( + std::min( + nMaxSquarePixels, + static_cast<sal_uInt32>(maPreviewSize.getWidth()) + * static_cast<sal_uInt32>(maPreviewSize.getHeight()))); + + // check if preview is big enough. Use a scaling value in + // the comparison to not get bigger at the last possible moment + // what may look awkward and pixelated (again). This means + // to use a percentage value - if we have at least + // that value of required pixels, we are good. + static const double fPreventAwkwardFactor(1.35); // 35% + if(nCurrentSquarePixels >= static_cast<sal_uInt32>(nRequiredSquarePixels * fPreventAwkwardFactor)) + { + // at this place we also could add a mechanism to let the preview + // bitmap 'shrink' again if it is currently 'too big' -> bigger + // than required. I think this is not necessary for now. + + // already sufficient, done. + return; + } + + // check if we have enough square pixels e.g for 8x8 pixels + if(nRequiredSquarePixels < 64) + { + // too small preview - let it empty + return; + } + + // Calculate nPlannedSquarePixels which is the required size + // expanded by a percentage (with max value of MaxSquarePixels) + static const double fExtraSpaceFactor(1.65); // 65% + const sal_uInt32 nPlannedSquarePixels( + std::min( + nMaxSquarePixels, + static_cast<sal_uInt32>(maPreviewSize.getWidth() * fExtraSpaceFactor) + * static_cast<sal_uInt32>(maPreviewSize.getHeight() * fExtraSpaceFactor))); + + // calculate back new width and height - it might have been + // truncated by MaxSquarePixels. + // We know that w*h == nPlannedSquarePixels and w/h == ratio + const double fRatio(static_cast<double>(maPreviewSize.getWidth()) / static_cast<double>(maPreviewSize.getHeight())); + const double fNewWidth(sqrt(static_cast<double>(nPlannedSquarePixels) * fRatio)); + const double fNewHeight(sqrt(static_cast<double>(nPlannedSquarePixels) / fRatio)); + const Size aScaledSize(basegfx::fround(fNewWidth), basegfx::fround(fNewHeight)); + + // check if this eventual maximum is already reached + // due to having hit the MaxSquarePixels. Due to using + // an integer AspectRatio, we cannot make a numeric exact + // comparison - we need to compare if we are close + const double fScaledSizeSquare(static_cast<double>(aScaledSize.getWidth() * aScaledSize.getHeight())); + const double fPreviewSizeSquare(static_cast<double>(maPreviewBitmap.GetSizePixel().getWidth() * maPreviewBitmap.GetSizePixel().getHeight())); + + // test as equal up to 0.1% (0.001) + if(fPreviewSizeSquare != 0.0 && fabs((fScaledSizeSquare / fPreviewSizeSquare) - 1.0) < 0.001) + { + // maximum is reached, avoid bigger scaling + return; + } + + // create temporary VDev and render to it + ScopedVclPtrInstance<VirtualDevice> pPrerenderVDev(*Application::GetDefaultDevice()); + pPrerenderVDev->SetOutputSizePixel(aScaledSize, false); + pPrerenderVDev->SetReferenceDevice( mnDPIX, mnDPIY ); + pPrerenderVDev->EnableOutput(); + pPrerenderVDev->SetBackground( Wallpaper(COL_WHITE) ); + + GDIMetaFile aMtf( maMtf ); + + Size aVDevSize( pPrerenderVDev->GetOutputSizePixel() ); + const Size aLogicSize( pPrerenderVDev->PixelToLogic( aVDevSize, MapMode( MapUnit::Map100thMM ) ) ); + Size aOrigSize( maOrigSize ); + if( aOrigSize.Width() < 1 ) + aOrigSize.setWidth( aLogicSize.Width() ); + if( aOrigSize.Height() < 1 ) + aOrigSize.setHeight( aLogicSize.Height() ); + double fScale = double(aLogicSize.Width())/double(aOrigSize.Width()); + + pPrerenderVDev->Erase(); + pPrerenderVDev->Push(); + pPrerenderVDev->SetMapMode(MapMode(MapUnit::Map100thMM)); + DrawModeFlags nOldDrawMode = pPrerenderVDev->GetDrawMode(); + if( mbGreyscale ) + pPrerenderVDev->SetDrawMode( pPrerenderVDev->GetDrawMode() | + ( DrawModeFlags::GrayLine | DrawModeFlags::GrayFill | DrawModeFlags::GrayText | + DrawModeFlags::GrayBitmap | DrawModeFlags::GrayGradient ) ); + aMtf.WindStart(); + aMtf.Scale( fScale, fScale ); + aMtf.WindStart(); + + const AntialiasingFlags nOriginalAA(pPrerenderVDev->GetAntialiasing()); + pPrerenderVDev->SetAntialiasing(nOriginalAA | AntialiasingFlags::EnableB2dDraw); + aMtf.Play( pPrerenderVDev.get(), Point( 0, 0 ), aLogicSize ); + pPrerenderVDev->SetAntialiasing(nOriginalAA); + + pPrerenderVDev->Pop(); + + pPrerenderVDev->SetMapMode(MapMode(MapUnit::MapPixel)); + + maPreviewBitmap = pPrerenderVDev->GetBitmapEx(Point(0, 0), aVDevSize); + + pPrerenderVDev->SetDrawMode( nOldDrawMode ); +} + +PrintDialog::ShowNupOrderWindow::ShowNupOrderWindow() + : mnOrderMode( NupOrderType::LRTB ) + , mnRows( 1 ) + , mnColumns( 1 ) +{ +} + +void PrintDialog::ShowNupOrderWindow::SetDrawingArea(weld::DrawingArea* pDrawingArea) +{ + Size aSize(70, 70); + pDrawingArea->set_size_request(aSize.Width(), aSize.Height()); + CustomWidgetController::SetDrawingArea(pDrawingArea); + SetOutputSizePixel(aSize); +} + +void PrintDialog::ShowNupOrderWindow::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle& /*i_rRect*/) +{ + rRenderContext.SetMapMode(MapMode(MapUnit::MapPixel)); + rRenderContext.SetTextColor(rRenderContext.GetSettings().GetStyleSettings().GetFieldTextColor()); + rRenderContext.SetBackground(Wallpaper(Application::GetSettings().GetStyleSettings().GetFieldColor())); + rRenderContext.Erase(); + + int nPages = mnRows * mnColumns; + Font aFont(rRenderContext.GetSettings().GetStyleSettings().GetFieldFont()); + aFont.SetFontSize(Size(0, 24)); + rRenderContext.SetFont(aFont); + Size aSampleTextSize(rRenderContext.GetTextWidth(OUString::number(nPages + 1)), rRenderContext.GetTextHeight()); + Size aOutSize(GetOutputSizePixel()); + Size aSubSize(aOutSize.Width() / mnColumns, aOutSize.Height() / mnRows); + // calculate font size: shrink the sample text so it fits + double fX = double(aSubSize.Width()) / double(aSampleTextSize.Width()); + double fY = double(aSubSize.Height()) / double(aSampleTextSize.Height()); + double fScale = (fX < fY) ? fX : fY; + long nFontHeight = long(24.0 * fScale) - 3; + if (nFontHeight < 5) + nFontHeight = 5; + aFont.SetFontSize(Size( 0, nFontHeight)); + rRenderContext.SetFont(aFont); + long nTextHeight = rRenderContext.GetTextHeight(); + for (int i = 0; i < nPages; i++) + { + OUString aPageText(OUString::number(i + 1)); + int nX = 0, nY = 0; + switch (mnOrderMode) + { + case NupOrderType::LRTB: + nX = (i % mnColumns); + nY = (i / mnColumns); + break; + case NupOrderType::TBLR: + nX = (i / mnRows); + nY = (i % mnRows); + break; + case NupOrderType::RLTB: + nX = mnColumns - 1 - (i % mnColumns); + nY = (i / mnColumns); + break; + case NupOrderType::TBRL: + nX = mnColumns - 1 - (i / mnRows); + nY = (i % mnRows); + break; + } + Size aTextSize(rRenderContext.GetTextWidth(aPageText), nTextHeight); + int nDeltaX = (aSubSize.Width() - aTextSize.Width()) / 2; + int nDeltaY = (aSubSize.Height() - aTextSize.Height()) / 2; + rRenderContext.DrawText(Point(nX * aSubSize.Width() + nDeltaX, + nY * aSubSize.Height() + nDeltaY), aPageText); + } + DecorationView aDecorationView(&rRenderContext); + aDecorationView.DrawFrame(tools::Rectangle(Point(0, 0), aOutSize), DrawFrameStyle::Group); +} + +Size const & PrintDialog::getJobPageSize() +{ + if( maFirstPageSize.IsEmpty() ) + { + maFirstPageSize = maNupPortraitSize; + GDIMetaFile aMtf; + if( maPController->getPageCountProtected() > 0 ) + { + PrinterController::PageSize aPageSize = maPController->getPageFile( 0, aMtf, true ); + maFirstPageSize = aPageSize.aSize; + } + } + return maFirstPageSize; +} + +PrintDialog::PrintDialog(weld::Window* i_pWindow, const std::shared_ptr<PrinterController>& i_rController) + : GenericDialogController(i_pWindow, "vcl/ui/printdialog.ui", "PrintDialog") + , maPController( i_rController ) + , mxTabCtrl(m_xBuilder->weld_notebook("tabcontrol")) + , mxScrolledWindow(m_xBuilder->weld_scrolled_window("scrolledwindow")) + , mxPageLayoutFrame(m_xBuilder->weld_frame("layoutframe")) + , mxPrinters(m_xBuilder->weld_combo_box("printersbox")) + , mxStatusTxt(m_xBuilder->weld_label("status")) + , mxSetupButton(m_xBuilder->weld_button("setup")) + , mxCopyCountField(m_xBuilder->weld_spin_button("copycount")) + , mxCollateBox(m_xBuilder->weld_check_button("collate")) + , mxCollateImage(m_xBuilder->weld_image("collateimage")) + , mxPageRangeEdit(m_xBuilder->weld_entry("pagerange")) + , mxPageRangesRadioButton(m_xBuilder->weld_radio_button("rbRangePages")) + , mxPaperSidesBox(m_xBuilder->weld_combo_box("sidesbox")) + , mxReverseOrderBox(m_xBuilder->weld_check_button("reverseorder")) + , mxOKButton(m_xBuilder->weld_button("ok")) + , mxCancelButton(m_xBuilder->weld_button("cancel")) + , mxHelpButton(m_xBuilder->weld_button("help")) + , mxMoreOptionsBtn(m_xBuilder->weld_button("moreoptionsbtn")) + , mxBackwardBtn(m_xBuilder->weld_button("backward")) + , mxForwardBtn(m_xBuilder->weld_button("forward")) + , mxFirstBtn(m_xBuilder->weld_button("btnFirst")) + , mxLastBtn(m_xBuilder->weld_button("btnLast")) + , mxPreviewBox(m_xBuilder->weld_check_button("previewbox")) + , mxNumPagesText(m_xBuilder->weld_label("totalnumpages")) + , mxPreview(new PrintPreviewWindow(this)) + , mxPreviewWindow(new weld::CustomWeld(*m_xBuilder, "preview", *mxPreview)) + , mxPageEdit(m_xBuilder->weld_entry("pageedit")) + , mxPagesBtn(m_xBuilder->weld_radio_button("pagespersheetbtn")) + , mxBrochureBtn(m_xBuilder->weld_radio_button("brochure")) + , mxPagesBoxTitleTxt(m_xBuilder->weld_label("pagespersheettxt")) + , mxNupPagesBox(m_xBuilder->weld_combo_box("pagespersheetbox")) + , mxNupNumPagesTxt(m_xBuilder->weld_label("pagestxt")) + , mxNupColEdt(m_xBuilder->weld_spin_button("pagecols")) + , mxNupTimesTxt(m_xBuilder->weld_label("by")) + , mxNupRowsEdt(m_xBuilder->weld_spin_button("pagerows")) + , mxPageMarginTxt1(m_xBuilder->weld_label("pagemargintxt1")) + , mxPageMarginEdt(m_xBuilder->weld_metric_spin_button("pagemarginsb", FieldUnit::MM)) + , mxPageMarginTxt2(m_xBuilder->weld_label("pagemargintxt2")) + , mxSheetMarginTxt1(m_xBuilder->weld_label("sheetmargintxt1")) + , mxSheetMarginEdt(m_xBuilder->weld_metric_spin_button("sheetmarginsb", FieldUnit::MM)) + , mxSheetMarginTxt2(m_xBuilder->weld_label("sheetmargintxt2")) + , mxPaperSizeBox(m_xBuilder->weld_combo_box("papersizebox")) + , mxOrientationBox(m_xBuilder->weld_combo_box("pageorientationbox")) + , mxNupOrderTxt(m_xBuilder->weld_label("labelorder")) + , mxNupOrderBox(m_xBuilder->weld_combo_box("orderbox")) + , mxNupOrder(new ShowNupOrderWindow) + , mxNupOrderWin(new weld::CustomWeld(*m_xBuilder, "orderpreview", *mxNupOrder)) + , mxBorderCB(m_xBuilder->weld_check_button("bordercb")) + , mxRangeExpander(m_xBuilder->weld_expander("exRangeExpander")) + , mxLayoutExpander(m_xBuilder->weld_expander("exLayoutExpander")) + , mxCustom(m_xBuilder->weld_widget("customcontents")) + , maPrintToFileText( VclResId( SV_PRINT_TOFILE_TXT ) ) + , maDefPrtText( VclResId( SV_PRINT_DEFPRT_TXT ) ) + , maNoPageStr( VclResId( SV_PRINT_NOPAGES ) ) + , maNoPreviewStr( VclResId( SV_PRINT_NOPREVIEW ) ) + , mnCurPage( 0 ) + , mnCachedPages( 0 ) + , mbCollateAlwaysOff(false) + , mbShowLayoutFrame( true ) + , mbSingleJobs( false ) +{ + // save printbutton text, gets exchanged occasionally with print to file + maPrintText = mxOKButton->get_label(); + + maPageStr = mxNumPagesText->get_label(); + + Printer::updatePrinters(); + + mxPrinters->append_text(maPrintToFileText); + // fill printer listbox + std::vector< OUString > rQueues( Printer::GetPrinterQueues() ); + std::sort( rQueues.begin(), rQueues.end(), lcl_ListBoxCompare ); + for( const auto& rQueue : rQueues ) + { + mxPrinters->append_text(rQueue); + } + // select current printer + if (mxPrinters->find_text(maPController->getPrinter()->GetName()) != -1) + mxPrinters->set_active_text(maPController->getPrinter()->GetName()); + else + { + // fall back to last printer + SettingsConfigItem* pItem = SettingsConfigItem::get(); + OUString aValue( pItem->getValue( "PrintDialog", + "LastPrinter" ) ); + if (mxPrinters->find_text(aValue) != -1) + { + mxPrinters->set_active_text(aValue); + maPController->setPrinter( VclPtrInstance<Printer>( aValue ) ); + } + else + { + // fall back to default printer + mxPrinters->set_active_text(Printer::GetDefaultPrinterName()); + maPController->setPrinter( VclPtrInstance<Printer>( Printer::GetDefaultPrinterName() ) ); + } + } + + // not printing to file + maPController->resetPrinterOptions( false ); + + // update the text fields for the printer + updatePrinterText(); + + // set paper sizes listbox + setPaperSizes(); + + // setup dependencies + checkControlDependencies(); + + // setup paper sides box + setupPaperSidesBox(); + + // set initial focus to "Number of copies" + mxCopyCountField->grab_focus(); + mxCopyCountField->select_region(0, -1); + + // setup sizes for N-Up + Size aNupSize( maPController->getPrinter()->PixelToLogic( + maPController->getPrinter()->GetPaperSizePixel(), MapMode( MapUnit::Map100thMM ) ) ); + if( maPController->getPrinter()->GetOrientation() == Orientation::Landscape ) + { + maNupLandscapeSize = aNupSize; + // coverity[swapped_arguments : FALSE] - this is in the correct order + maNupPortraitSize = Size( aNupSize.Height(), aNupSize.Width() ); + } + else + { + maNupPortraitSize = aNupSize; + // coverity[swapped_arguments : FALSE] - this is in the correct order + maNupLandscapeSize = Size( aNupSize.Height(), aNupSize.Width() ); + } + + initFromMultiPageSetup( maPController->getMultipage() ); + + // setup optional UI options set by application + setupOptionalUI(); + + // hide layout frame if unwanted + mxPageLayoutFrame->set_visible(mbShowLayoutFrame); + + // restore settings from last run + readFromSettings(); + + // setup click hdl + mxOKButton->connect_clicked(LINK(this, PrintDialog, ClickHdl)); + mxCancelButton->connect_clicked(LINK(this, PrintDialog, ClickHdl)); + mxHelpButton->connect_clicked(LINK(this, PrintDialog, ClickHdl)); + mxSetupButton->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); + mxMoreOptionsBtn->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); + mxBackwardBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl)); + mxForwardBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl)); + mxFirstBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl)); + mxLastBtn->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); + mxPreviewBox->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); + mxBorderCB->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); + + // setup toggle hdl + mxReverseOrderBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); + mxCollateBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); + mxPagesBtn->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); + + // setup select hdl + mxPrinters->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); + mxPaperSidesBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); + mxNupPagesBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); + mxOrientationBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); + mxNupOrderBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); + mxPaperSizeBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); + + // setup modify hdl + mxPageEdit->connect_activate( LINK( this, PrintDialog, ActivateHdl ) ); + mxPageEdit->connect_focus_out( LINK( this, PrintDialog, FocusOutHdl ) ); + mxCopyCountField->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) ); + mxNupColEdt->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) ); + mxNupRowsEdt->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) ); + mxPageMarginEdt->connect_value_changed( LINK( this, PrintDialog, MetricSpinModifyHdl ) ); + mxSheetMarginEdt->connect_value_changed( LINK( this, PrintDialog, MetricSpinModifyHdl ) ); + + mxRangeExpander->connect_expanded(LINK( this, PrintDialog, ExpandHdl)); + mxLayoutExpander->connect_expanded(LINK( this, PrintDialog, ExpandHdl)); + + updateNupFromPages(); + + // lock the dialog height, regardless of later expander state + mxScrolledWindow->set_size_request( + mxScrolledWindow->get_preferred_size().Width() + mxScrolledWindow->get_vscroll_width(), + mxScrolledWindow->get_preferred_size().Height()); +} + +IMPL_LINK_NOARG(PrintDialog, ExpandHdl, weld::Expander&, void) +{ + m_xDialog->resize_to_request(); +} + +PrintDialog::~PrintDialog() +{ +} + +void PrintDialog::setupPaperSidesBox() +{ + DuplexMode eDuplex = maPController->getPrinter()->GetDuplexMode(); + + if ( eDuplex == DuplexMode::Unknown || isPrintToFile() ) + { + mxPaperSidesBox->set_active( 0 ); + mxPaperSidesBox->set_sensitive( false ); + } + else + { + mxPaperSidesBox->set_active( static_cast<sal_Int32>(eDuplex) - 1 ); + mxPaperSidesBox->set_sensitive( true ); + } +} + +void PrintDialog::storeToSettings() +{ + SettingsConfigItem* pItem = SettingsConfigItem::get(); + + pItem->setValue( "PrintDialog", + "LastPrinter", + isPrintToFile() ? Printer::GetDefaultPrinterName() + : mxPrinters->get_active_text() ); + + pItem->setValue( "PrintDialog", + "LastPage", + mxTabCtrl->get_tab_label_text(mxTabCtrl->get_current_page_ident())); + + pItem->setValue( "PrintDialog", + "WindowState", + OStringToOUString(m_xDialog->get_window_state(WindowStateMask::All), RTL_TEXTENCODING_UTF8) ); + + pItem->setValue( "PrintDialog", + "CopyCount", + mxCopyCountField->get_text() ); + + pItem->setValue( "PrintDialog", + "Collate", + mxCollateBox->get_active() ? OUString("true") : + OUString("false") ); + + pItem->setValue( "PrintDialog", + "CollateSingleJobs", + mbSingleJobs ? OUString("true") : + OUString("false") ); + + pItem->setValue( "PrintDialog", + "HasPreview", + hasPreview() ? OUString("true") : + OUString("false") ); + + pItem->Commit(); +} + +void PrintDialog::readFromSettings() +{ + SettingsConfigItem* pItem = SettingsConfigItem::get(); + + // read last selected tab page; if it exists, activate it + OUString aValue = pItem->getValue( "PrintDialog", + "LastPage" ); + sal_uInt16 nCount = mxTabCtrl->get_n_pages(); + for (sal_uInt16 i = 0; i < nCount; ++i) + { + OString sPageId = mxTabCtrl->get_page_ident(i); + if (aValue == mxTabCtrl->get_tab_label_text(sPageId)) + { + mxTabCtrl->set_current_page(sPageId); + break; + } + } + + // persistent window state + aValue = pItem->getValue( "PrintDialog", + "WindowState" ); + if (!aValue.isEmpty()) + m_xDialog->set_window_state(OUStringToOString(aValue, RTL_TEXTENCODING_UTF8)); + + // collate + aValue = pItem->getValue( "PrintDialog", + "CollateBox" ); + if( aValue.equalsIgnoreAsciiCase("alwaysoff") ) + { + mbCollateAlwaysOff = true; + mxCollateBox->set_active( false ); + mxCollateBox->set_sensitive( false ); + } + else + { + mbCollateAlwaysOff = false; + aValue = pItem->getValue( "PrintDialog", + "Collate" ); + mxCollateBox->set_active( aValue.equalsIgnoreAsciiCase("true") ); + } + + // collate single jobs + aValue = pItem->getValue( "PrintDialog", + "CollateSingleJobs" ); + if ( aValue.equalsIgnoreAsciiCase("true") ) + mbSingleJobs = true; + else + mbSingleJobs = false; + + // preview box + aValue = pItem->getValue( "PrintDialog", + "HasPreview" ); + if ( aValue.equalsIgnoreAsciiCase("false") ) + mxPreviewBox->set_active( false ); + else + mxPreviewBox->set_active( true ); + +} + +void PrintDialog::setPaperSizes() +{ + mxPaperSizeBox->clear(); + + VclPtr<Printer> aPrt( maPController->getPrinter() ); + mePaper = aPrt->GetPaper(); + + if ( isPrintToFile() ) + { + mxPaperSizeBox->set_sensitive( false ); + } + else + { + for (int nPaper = 0; nPaper < aPrt->GetPaperInfoCount(); nPaper++) + { + PaperInfo aInfo = aPrt->GetPaperInfo( nPaper ); + aInfo.doSloppyFit(); + Paper ePaper = aInfo.getPaper(); + + const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper()); + MapUnit eUnit = MapUnit::MapMM; + int nDigits = 0; + if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US ) + { + eUnit = MapUnit::Map100thInch; + nDigits = 2; + } + Size aSize = aPrt->GetPaperSize( nPaper ); + Size aLogicPaperSize( OutputDevice::LogicToLogic( aSize, MapMode( MapUnit::Map100thMM ), MapMode( eUnit ) ) ); + + OUString aWidth( rLocWrap.getNum( aLogicPaperSize.Width(), nDigits ) ); + OUString aHeight( rLocWrap.getNum( aLogicPaperSize.Height(), nDigits ) ); + OUString aUnit = eUnit == MapUnit::MapMM ? OUString("mm") : OUString("in"); + OUString aPaperName = Printer::GetPaperName( ePaper ) + " " + aWidth + aUnit + " x " + aHeight + aUnit; + + mxPaperSizeBox->append_text(aPaperName); + + if ( ePaper == mePaper ) + mxPaperSizeBox->set_active( nPaper ); + } + + mxPaperSizeBox->set_sensitive( true ); + } +} + +void PrintDialog::updatePrinterText() +{ + const OUString aDefPrt( Printer::GetDefaultPrinterName() ); + const QueueInfo* pInfo = Printer::GetQueueInfo( mxPrinters->get_active_text(), true ); + if( pInfo ) + { + // FIXME: status text + OUString aStatus; + if( aDefPrt == pInfo->GetPrinterName() ) + aStatus = maDefPrtText; + mxStatusTxt->set_label( aStatus ); + } + else + { + mxStatusTxt->set_label( OUString() ); + } +} + +void PrintDialog::setPreviewText() +{ + OUString aNewText( maPageStr.replaceFirst( "%n", OUString::number( mnCachedPages ) ) ); + mxNumPagesText->set_label( aNewText ); +} + +void PrintDialog::preparePreview( bool i_bMayUseCache ) +{ + VclPtr<Printer> aPrt( maPController->getPrinter() ); + Size aCurPageSize = aPrt->PixelToLogic( aPrt->GetPaperSizePixel(), MapMode( MapUnit::Map100thMM ) ); + // tdf#123076 Get paper size for the preview top label + mePaper = aPrt->GetPaper(); + GDIMetaFile aMtf; + + // page range may have changed depending on options + sal_Int32 nPages = maPController->getFilteredPageCount(); + mnCachedPages = nPages; + + setPreviewText(); + + if ( !hasPreview() ) + { + mxPreview->setPreview( aMtf, aCurPageSize, + Printer::GetPaperName( mePaper ), + maNoPreviewStr, + aPrt->GetDPIX(), aPrt->GetDPIY(), + aPrt->GetPrinterOptions().IsConvertToGreyscales() + ); + + mxForwardBtn->set_sensitive( false ); + mxBackwardBtn->set_sensitive( false ); + mxFirstBtn->set_sensitive( false ); + mxLastBtn->set_sensitive( false ); + + mxPageEdit->set_sensitive( false ); + + return; + } + + if( mnCurPage >= nPages ) + mnCurPage = nPages-1; + if( mnCurPage < 0 ) + mnCurPage = 0; + mxPageEdit->set_text(OUString::number(mnCurPage + 1)); + + const MapMode aMapMode( MapUnit::Map100thMM ); + if( nPages > 0 ) + { + PrinterController::PageSize aPageSize = + maPController->getFilteredPageFile( mnCurPage, aMtf, i_bMayUseCache ); + if( ! aPageSize.bFullPaper ) + { + Point aOff( aPrt->PixelToLogic( aPrt->GetPageOffsetPixel(), aMapMode ) ); + aMtf.Move( aOff.X(), aOff.Y() ); + } + } + + mxPreview->setPreview( aMtf, aCurPageSize, + Printer::GetPaperName( mePaper ), + nPages > 0 ? OUString() : maNoPageStr, + aPrt->GetDPIX(), aPrt->GetDPIY(), + aPrt->GetPrinterOptions().IsConvertToGreyscales() + ); + + mxForwardBtn->set_sensitive( mnCurPage < nPages-1 ); + mxBackwardBtn->set_sensitive( mnCurPage != 0 ); + mxFirstBtn->set_sensitive( mnCurPage != 0 ); + mxLastBtn->set_sensitive( mnCurPage < nPages-1 ); + mxPageEdit->set_sensitive( nPages > 1 ); +} + +void PrintDialog::updateOrientationBox( const bool bAutomatic ) +{ + if ( !bAutomatic ) + { + Orientation eOrientation = maPController->getPrinter()->GetOrientation(); + mxOrientationBox->set_active( static_cast<sal_Int32>(eOrientation) + 1 ); + } + else if ( hasOrientationChanged() ) + { + mxOrientationBox->set_active( ORIENTATION_AUTOMATIC ); + } +} + +bool PrintDialog::hasOrientationChanged() const +{ + const int nOrientation = mxOrientationBox->get_active(); + const Orientation eOrientation = maPController->getPrinter()->GetOrientation(); + + return (nOrientation == ORIENTATION_LANDSCAPE && eOrientation == Orientation::Portrait) + || (nOrientation == ORIENTATION_PORTRAIT && eOrientation == Orientation::Landscape); +} + +// make sure paper size matches paper orientation +void PrintDialog::checkPaperSize( Size& rPaperSize ) +{ + Orientation eOrientation = maPController->getPrinter()->GetOrientation(); + if ( (eOrientation == Orientation::Portrait && rPaperSize.Width() > rPaperSize.Height()) || + (eOrientation == Orientation::Landscape && rPaperSize.Width() < rPaperSize.Height()) ) + { + // coverity[swapped-arguments : FALSE] - this is in the correct order + rPaperSize = Size( rPaperSize.Height(), rPaperSize.Width() ); + } +} + +// Always use this function to set paper orientation to make sure everything behaves well +void PrintDialog::setPaperOrientation( Orientation eOrientation ) +{ + VclPtr<Printer> aPrt( maPController->getPrinter() ); + aPrt->SetOrientation( eOrientation ); + + // check if it's necessary to swap width and height of paper + if ( maPController->isPaperSizeFromUser() ) + { + Size& aPaperSize = maPController->getPaperSizeFromUser(); + checkPaperSize( aPaperSize ); + } + else if ( maPController->getPapersizeFromSetup() ) + { + Size& aPaperSize = maPController->getPaperSizeSetup(); + checkPaperSize( aPaperSize ); + } +} + +void PrintDialog::checkControlDependencies() +{ + if (mxCopyCountField->get_value() > 1) + mxCollateBox->set_sensitive( !mbCollateAlwaysOff ); + else + mxCollateBox->set_sensitive( false ); + + OUString aImg(mxCollateBox->get_active() ? OUString(SV_PRINT_COLLATE_BMP) : OUString(SV_PRINT_NOCOLLATE_BMP)); + + mxCollateImage->set_from_icon_name(aImg); + + // enable setup button only for printers that can be setup + bool bHaveSetup = maPController->getPrinter()->HasSupport( PrinterSupport::SetupDialog ); + mxSetupButton->set_sensitive(bHaveSetup); +} + +void PrintDialog::checkOptionalControlDependencies() +{ + for( const auto& rEntry : maControlToPropertyMap ) + { + bool bShouldbeEnabled = maPController->isUIOptionEnabled( rEntry.second ); + + if (bShouldbeEnabled && dynamic_cast<weld::RadioButton*>(rEntry.first)) + { + auto r_it = maControlToNumValMap.find( rEntry.first ); + if( r_it != maControlToNumValMap.end() ) + { + bShouldbeEnabled = maPController->isUIChoiceEnabled( rEntry.second, r_it->second ); + } + } + + bool bIsEnabled = rEntry.first->get_sensitive(); + // Enable does not do a change check first, so can be less cheap than expected + if (bShouldbeEnabled != bIsEnabled) + rEntry.first->set_sensitive( bShouldbeEnabled ); + } +} + +void PrintDialog::initFromMultiPageSetup( const vcl::PrinterController::MultiPageSetup& i_rMPS ) +{ + mxNupOrderWin->show(); + mxPagesBtn->set_active(true); + mxBrochureBtn->hide(); + + // setup field units for metric fields + const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper()); + FieldUnit eUnit = FieldUnit::MM; + sal_uInt16 nDigits = 0; + if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US ) + { + eUnit = FieldUnit::INCH; + nDigits = 2; + } + // set units + mxPageMarginEdt->set_unit( eUnit ); + mxSheetMarginEdt->set_unit( eUnit ); + + // set precision + mxPageMarginEdt->set_digits( nDigits ); + mxSheetMarginEdt->set_digits( nDigits ); + + mxSheetMarginEdt->set_value( mxSheetMarginEdt->normalize( i_rMPS.nLeftMargin ), FieldUnit::MM_100TH ); + mxPageMarginEdt->set_value( mxPageMarginEdt->normalize( i_rMPS.nHorizontalSpacing ), FieldUnit::MM_100TH ); + mxBorderCB->set_active( i_rMPS.bDrawBorder ); + mxNupRowsEdt->set_value( i_rMPS.nRows ); + mxNupColEdt->set_value( i_rMPS.nColumns ); + mxNupOrderBox->set_active( static_cast<sal_Int32>(i_rMPS.nOrder) ); + if( i_rMPS.nRows != 1 || i_rMPS.nColumns != 1 ) + { + mxNupPagesBox->set_active( mxNupPagesBox->get_count()-1 ); + showAdvancedControls( true ); + mxNupOrder->setValues( i_rMPS.nOrder, i_rMPS.nColumns, i_rMPS.nRows ); + } +} + +void PrintDialog::updateNup( bool i_bMayUseCache ) +{ + int nRows = mxNupRowsEdt->get_value(); + int nCols = mxNupColEdt->get_value(); + long nPageMargin = mxPageMarginEdt->denormalize(mxPageMarginEdt->get_value( FieldUnit::MM_100TH )); + long nSheetMargin = mxSheetMarginEdt->denormalize(mxSheetMarginEdt->get_value( FieldUnit::MM_100TH )); + + PrinterController::MultiPageSetup aMPS; + aMPS.nRows = nRows; + aMPS.nColumns = nCols; + aMPS.nLeftMargin = + aMPS.nTopMargin = + aMPS.nRightMargin = + aMPS.nBottomMargin = nSheetMargin; + + aMPS.nHorizontalSpacing = + aMPS.nVerticalSpacing = nPageMargin; + + aMPS.bDrawBorder = mxBorderCB->get_active(); + + aMPS.nOrder = static_cast<NupOrderType>(mxNupOrderBox->get_active()); + + int nOrientationMode = mxOrientationBox->get_active(); + if( nOrientationMode == ORIENTATION_LANDSCAPE ) + aMPS.aPaperSize = maNupLandscapeSize; + else if( nOrientationMode == ORIENTATION_PORTRAIT ) + aMPS.aPaperSize = maNupPortraitSize; + else // automatic mode + { + // get size of first real page to see if it is portrait or landscape + // we assume same page sizes for all the pages for this + Size aPageSize = getJobPageSize(); + + Size aMultiSize( aPageSize.Width() * nCols, aPageSize.Height() * nRows ); + if( aMultiSize.Width() > aMultiSize.Height() ) // fits better on landscape + { + aMPS.aPaperSize = maNupLandscapeSize; + setPaperOrientation( Orientation::Landscape ); + } + else + { + aMPS.aPaperSize = maNupPortraitSize; + setPaperOrientation( Orientation::Portrait ); + } + } + + maPController->setMultipage( aMPS ); + + mxNupOrder->setValues( aMPS.nOrder, nCols, nRows ); + + preparePreview( i_bMayUseCache ); +} + +void PrintDialog::updateNupFromPages( bool i_bMayUseCache ) +{ + int nPages = mxNupPagesBox->get_active_id().toInt32(); + int nRows = mxNupRowsEdt->get_value(); + int nCols = mxNupColEdt->get_value(); + long nPageMargin = mxPageMarginEdt->denormalize(mxPageMarginEdt->get_value( FieldUnit::MM_100TH )); + long nSheetMargin = mxSheetMarginEdt->denormalize(mxSheetMarginEdt->get_value( FieldUnit::MM_100TH )); + bool bCustom = false; + + if( nPages == 1 ) + { + nRows = nCols = 1; + nSheetMargin = 0; + nPageMargin = 0; + } + else if( nPages == 2 || nPages == 4 || nPages == 6 || nPages == 9 || nPages == 16 ) + { + Size aJobPageSize( getJobPageSize() ); + bool bPortrait = aJobPageSize.Width() < aJobPageSize.Height(); + if( nPages == 2 ) + { + if( bPortrait ) + { + nRows = 1; + nCols = 2; + } + else + { + nRows = 2; + nCols = 1; + } + } + else if( nPages == 4 ) + nRows = nCols = 2; + else if( nPages == 6 ) + { + if( bPortrait ) + { + nRows = 2; + nCols = 3; + } + else + { + nRows = 3; + nCols = 2; + } + } + else if( nPages == 9 ) + nRows = nCols = 3; + else if( nPages == 16 ) + nRows = nCols = 4; + nPageMargin = 0; + nSheetMargin = 0; + } + else + bCustom = true; + + if( nPages > 1 ) + { + // set upper limits for margins based on job page size and rows/columns + Size aSize( getJobPageSize() ); + + // maximum sheet distance: 1/2 sheet + long nHorzMax = aSize.Width()/2; + long nVertMax = aSize.Height()/2; + if( nSheetMargin > nHorzMax ) + nSheetMargin = nHorzMax; + if( nSheetMargin > nVertMax ) + nSheetMargin = nVertMax; + + mxSheetMarginEdt->set_max( + mxSheetMarginEdt->normalize( + std::min(nHorzMax, nVertMax) ), FieldUnit::MM_100TH ); + + // maximum page distance + nHorzMax = (aSize.Width() - 2*nSheetMargin); + if( nCols > 1 ) + nHorzMax /= (nCols-1); + nVertMax = (aSize.Height() - 2*nSheetMargin); + if( nRows > 1 ) + nHorzMax /= (nRows-1); + + if( nPageMargin > nHorzMax ) + nPageMargin = nHorzMax; + if( nPageMargin > nVertMax ) + nPageMargin = nVertMax; + + mxPageMarginEdt->set_max( + mxSheetMarginEdt->normalize( + std::min(nHorzMax, nVertMax ) ), FieldUnit::MM_100TH ); + } + + mxNupRowsEdt->set_value( nRows ); + mxNupColEdt->set_value( nCols ); + mxPageMarginEdt->set_value( mxPageMarginEdt->normalize( nPageMargin ), FieldUnit::MM_100TH ); + mxSheetMarginEdt->set_value( mxSheetMarginEdt->normalize( nSheetMargin ), FieldUnit::MM_100TH ); + + showAdvancedControls( bCustom ); + updateNup( i_bMayUseCache ); +} + +void PrintDialog::enableNupControls( bool bEnable ) +{ + mxNupPagesBox->set_sensitive( bEnable ); + mxNupNumPagesTxt->set_sensitive( bEnable ); + mxNupColEdt->set_sensitive( bEnable ); + mxNupTimesTxt->set_sensitive( bEnable ); + mxNupRowsEdt->set_sensitive( bEnable ); + mxPageMarginTxt1->set_sensitive( bEnable ); + mxPageMarginEdt->set_sensitive( bEnable ); + mxPageMarginTxt2->set_sensitive( bEnable ); + mxSheetMarginTxt1->set_sensitive( bEnable ); + mxSheetMarginEdt->set_sensitive( bEnable ); + mxSheetMarginTxt2->set_sensitive( bEnable ); + mxNupOrderTxt->set_sensitive( bEnable ); + mxNupOrderBox->set_sensitive( bEnable ); + mxNupOrderWin->set_sensitive( bEnable ); + mxBorderCB->set_sensitive( bEnable ); +} + +void PrintDialog::showAdvancedControls( bool i_bShow ) +{ + mxNupNumPagesTxt->set_visible( i_bShow ); + mxNupColEdt->set_visible( i_bShow ); + mxNupTimesTxt->set_visible( i_bShow ); + mxNupRowsEdt->set_visible( i_bShow ); + mxPageMarginTxt1->set_visible( i_bShow ); + mxPageMarginEdt->set_visible( i_bShow ); + mxPageMarginTxt2->set_visible( i_bShow ); + mxSheetMarginTxt1->set_visible( i_bShow ); + mxSheetMarginEdt->set_visible( i_bShow ); + mxSheetMarginTxt2->set_visible( i_bShow ); +} + +namespace +{ + void setHelpId( weld::Widget* i_pWindow, const Sequence< OUString >& i_rHelpIds, sal_Int32 i_nIndex ) + { + if( i_nIndex >= 0 && i_nIndex < i_rHelpIds.getLength() ) + i_pWindow->set_help_id( OUStringToOString( i_rHelpIds.getConstArray()[i_nIndex], RTL_TEXTENCODING_UTF8 ) ); + } + + void setHelpText( weld::Widget* i_pWindow, const Sequence< OUString >& i_rHelpTexts, sal_Int32 i_nIndex ) + { + // without a help text set and the correct smartID, + // help texts will be retrieved from the online help system + if( i_nIndex >= 0 && i_nIndex < i_rHelpTexts.getLength() ) + i_pWindow->set_tooltip_text(i_rHelpTexts.getConstArray()[i_nIndex]); + } +} + +void PrintDialog::setupOptionalUI() +{ + const Sequence< PropertyValue >& rOptions( maPController->getUIOptions() ); + for( const auto& rOption : rOptions ) + { + if (rOption.Name == "OptionsUIFile") + { + OUString sOptionsUIFile; + rOption.Value >>= sOptionsUIFile; + mxCustomOptionsUIBuilder.reset(Application::CreateBuilder(mxCustom.get(), sOptionsUIFile)); + std::unique_ptr<weld::Container> xWindow = mxCustomOptionsUIBuilder->weld_container("box"); + xWindow->show(); + continue; + } + + Sequence< beans::PropertyValue > aOptProp; + rOption.Value >>= aOptProp; + + // extract ui element + OUString aCtrlType; + OString aID; + OUString aText; + OUString aPropertyName; + Sequence< OUString > aChoices; + Sequence< sal_Bool > aChoicesDisabled; + Sequence< OUString > aHelpTexts; + Sequence< OUString > aIDs; + Sequence< OUString > aHelpIds; + sal_Int64 nMinValue = 0, nMaxValue = 0; + OUString aGroupingHint; + + for( const beans::PropertyValue& rEntry : std::as_const(aOptProp) ) + { + if ( rEntry.Name == "ID" ) + { + rEntry.Value >>= aIDs; + aID = OUStringToOString(aIDs[0], RTL_TEXTENCODING_UTF8); + } + if ( rEntry.Name == "Text" ) + { + rEntry.Value >>= aText; + } + else if ( rEntry.Name == "ControlType" ) + { + rEntry.Value >>= aCtrlType; + } + else if ( rEntry.Name == "Choices" ) + { + rEntry.Value >>= aChoices; + } + else if ( rEntry.Name == "ChoicesDisabled" ) + { + rEntry.Value >>= aChoicesDisabled; + } + else if ( rEntry.Name == "Property" ) + { + PropertyValue aVal; + rEntry.Value >>= aVal; + aPropertyName = aVal.Name; + } + else if ( rEntry.Name == "Enabled" ) + { + } + else if ( rEntry.Name == "GroupingHint" ) + { + rEntry.Value >>= aGroupingHint; + } + else if ( rEntry.Name == "DependsOnName" ) + { + } + else if ( rEntry.Name == "DependsOnEntry" ) + { + } + else if ( rEntry.Name == "AttachToDependency" ) + { + } + else if ( rEntry.Name == "MinValue" ) + { + rEntry.Value >>= nMinValue; + } + else if ( rEntry.Name == "MaxValue" ) + { + rEntry.Value >>= nMaxValue; + } + else if ( rEntry.Name == "HelpText" ) + { + if( ! (rEntry.Value >>= aHelpTexts) ) + { + OUString aHelpText; + if( rEntry.Value >>= aHelpText ) + { + aHelpTexts.realloc( 1 ); + *aHelpTexts.getArray() = aHelpText; + } + } + } + else if ( rEntry.Name == "HelpId" ) + { + if( ! (rEntry.Value >>= aHelpIds ) ) + { + OUString aHelpId; + if( rEntry.Value >>= aHelpId ) + { + aHelpIds.realloc( 1 ); + *aHelpIds.getArray() = aHelpId; + } + } + } + else if ( rEntry.Name == "HintNoLayoutPage" ) + { + bool bHasLayoutFrame = false; + rEntry.Value >>= bHasLayoutFrame; + mbShowLayoutFrame = !bHasLayoutFrame; + } + } + + if (aCtrlType == "Group") + { + aID = "custom"; + + weld::Container* pPage = mxTabCtrl->get_page(aID); + if (!pPage) + continue; + + mxTabCtrl->set_tab_label_text(aID, aText); + + // set help id + if (aHelpIds.hasElements()) + pPage->set_help_id(OUStringToOString(aHelpIds.getConstArray()[0], RTL_TEXTENCODING_UTF8)); + + // set help text + if (aHelpTexts.hasElements()) + pPage->set_tooltip_text(aHelpTexts.getConstArray()[0]); + + pPage->show(); + } + else if (aCtrlType == "Subgroup" && !aID.isEmpty()) + { + std::unique_ptr<weld::Widget> xWidget; + // since 'New Print Dialog Design' fromwhich in calc is not a frame anymore + if (aID == "fromwhich") + { + std::unique_ptr<weld::Label> xLabel = m_xBuilder->weld_label(aID); + xLabel->set_label(aText); + xWidget = std::move(xLabel); + } + else + { + std::unique_ptr<weld::Frame> xFrame = m_xBuilder->weld_frame(aID); + if (!xFrame && mxCustomOptionsUIBuilder) + xFrame = mxCustomOptionsUIBuilder->weld_frame(aID); + if (xFrame) + { + xFrame->set_label(aText); + xWidget = std::move(xFrame); + } + } + + if (!xWidget) + continue; + + // set help id + setHelpId(xWidget.get(), aHelpIds, 0); + // set help text + setHelpText(xWidget.get(), aHelpTexts, 0); + + xWidget->show(); + } + // EVIL + else if( aCtrlType == "Bool" && aGroupingHint == "LayoutPage" && aPropertyName == "PrintProspect" ) + { + mxBrochureBtn->set_label(aText); + mxBrochureBtn->show(); + + bool bVal = false; + PropertyValue* pVal = maPController->getValue( aPropertyName ); + if( pVal ) + pVal->Value >>= bVal; + mxBrochureBtn->set_active( bVal ); + mxBrochureBtn->set_sensitive( maPController->isUIOptionEnabled( aPropertyName ) && pVal != nullptr ); + mxBrochureBtn->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); + + maPropertyToWindowMap[aPropertyName].emplace_back(mxBrochureBtn.get()); + maControlToPropertyMap[mxBrochureBtn.get()] = aPropertyName; + + // set help id + setHelpId( mxBrochureBtn.get(), aHelpIds, 0 ); + // set help text + setHelpText( mxBrochureBtn.get(), aHelpTexts, 0 ); + } + else if (aCtrlType == "Bool") + { + // add a check box + std::unique_ptr<weld::CheckButton> xNewBox = m_xBuilder->weld_check_button(aID); + if (!xNewBox && mxCustomOptionsUIBuilder) + xNewBox = mxCustomOptionsUIBuilder->weld_check_button(aID); + if (!xNewBox) + continue; + + xNewBox->set_label( aText ); + xNewBox->show(); + + bool bVal = false; + PropertyValue* pVal = maPController->getValue( aPropertyName ); + if( pVal ) + pVal->Value >>= bVal; + xNewBox->set_active( bVal ); + xNewBox->connect_toggled( LINK( this, PrintDialog, UIOption_CheckHdl ) ); + + maExtraControls.emplace_back(std::move(xNewBox)); + + weld::Widget* pWidget = maExtraControls.back().get(); + + maPropertyToWindowMap[aPropertyName].emplace_back(pWidget); + maControlToPropertyMap[pWidget] = aPropertyName; + + // set help id + setHelpId(pWidget, aHelpIds, 0); + // set help text + setHelpText(pWidget, aHelpTexts, 0); + } + else if (aCtrlType == "Radio") + { + sal_Int32 nCurHelpText = 0; + + // iterate options + sal_Int32 nSelectVal = 0; + PropertyValue* pVal = maPController->getValue( aPropertyName ); + if( pVal && pVal->Value.hasValue() ) + pVal->Value >>= nSelectVal; + for( sal_Int32 m = 0; m < aChoices.getLength(); m++ ) + { + aID = OUStringToOString(aIDs[m], RTL_TEXTENCODING_UTF8); + std::unique_ptr<weld::RadioButton> xBtn = m_xBuilder->weld_radio_button(aID); + if (!xBtn && mxCustomOptionsUIBuilder) + xBtn = mxCustomOptionsUIBuilder->weld_radio_button(aID); + if (!xBtn) + continue; + + xBtn->set_label( aChoices[m] ); + xBtn->set_active( m == nSelectVal ); + xBtn->connect_toggled( LINK( this, PrintDialog, UIOption_RadioHdl ) ); + if( aChoicesDisabled.getLength() > m && aChoicesDisabled[m] ) + xBtn->set_sensitive( false ); + xBtn->show(); + + maExtraControls.emplace_back(std::move(xBtn)); + + weld::Widget* pWidget = maExtraControls.back().get(); + + maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); + maControlToPropertyMap[pWidget] = aPropertyName; + maControlToNumValMap[pWidget] = m; + + // set help id + setHelpId( pWidget, aHelpIds, nCurHelpText ); + // set help text + setHelpText( pWidget, aHelpTexts, nCurHelpText ); + nCurHelpText++; + } + } + else if ( aCtrlType == "List" ) + { + std::unique_ptr<weld::ComboBox> xList = m_xBuilder->weld_combo_box(aID); + if (!xList && mxCustomOptionsUIBuilder) + xList = mxCustomOptionsUIBuilder->weld_combo_box(aID); + if (!xList) + continue; + + // iterate options + for( const auto& rChoice : std::as_const(aChoices) ) + xList->append_text(rChoice); + + sal_Int32 nSelectVal = 0; + PropertyValue* pVal = maPController->getValue( aPropertyName ); + if( pVal && pVal->Value.hasValue() ) + pVal->Value >>= nSelectVal; + xList->set_active(nSelectVal); + xList->connect_changed( LINK( this, PrintDialog, UIOption_SelectHdl ) ); + xList->show(); + + maExtraControls.emplace_back(std::move(xList)); + + weld::Widget* pWidget = maExtraControls.back().get(); + + maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); + maControlToPropertyMap[pWidget] = aPropertyName; + + // set help id + setHelpId( pWidget, aHelpIds, 0 ); + // set help text + setHelpText( pWidget, aHelpTexts, 0 ); + } + else if ( aCtrlType == "Range" ) + { + std::unique_ptr<weld::SpinButton> xField = m_xBuilder->weld_spin_button(aID); + if (!xField && mxCustomOptionsUIBuilder) + xField = mxCustomOptionsUIBuilder->weld_spin_button(aID); + if (!xField) + continue; + + // set min/max and current value + if(nMinValue != nMaxValue) + xField->set_range(nMinValue, nMaxValue); + + sal_Int64 nCurVal = 0; + PropertyValue* pVal = maPController->getValue( aPropertyName ); + if( pVal && pVal->Value.hasValue() ) + pVal->Value >>= nCurVal; + xField->set_value( nCurVal ); + xField->connect_value_changed( LINK( this, PrintDialog, UIOption_SpinModifyHdl ) ); + xField->show(); + + maExtraControls.emplace_back(std::move(xField)); + + weld::Widget* pWidget = maExtraControls.back().get(); + + maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); + maControlToPropertyMap[pWidget] = aPropertyName; + + // set help id + setHelpId( pWidget, aHelpIds, 0 ); + // set help text + setHelpText( pWidget, aHelpTexts, 0 ); + } + else if (aCtrlType == "Edit") + { + std::unique_ptr<weld::Entry> xField = m_xBuilder->weld_entry(aID); + if (!xField && mxCustomOptionsUIBuilder) + xField = mxCustomOptionsUIBuilder->weld_entry(aID); + if (!xField) + continue; + + OUString aCurVal; + PropertyValue* pVal = maPController->getValue( aPropertyName ); + if( pVal && pVal->Value.hasValue() ) + pVal->Value >>= aCurVal; + xField->set_text( aCurVal ); + xField->connect_changed( LINK( this, PrintDialog, UIOption_EntryModifyHdl ) ); + xField->show(); + + maExtraControls.emplace_back(std::move(xField)); + + weld::Widget* pWidget = maExtraControls.back().get(); + + maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); + maControlToPropertyMap[pWidget] = aPropertyName; + + // set help id + setHelpId( pWidget, aHelpIds, 0 ); + // set help text + setHelpText( pWidget, aHelpTexts, 0 ); + } + else + { + SAL_WARN( "vcl", "Unsupported UI option: \"" << aCtrlType << '"'); + } + } + + // #i106506# if no brochure button, then the singular Pages radio button + // makes no sense, so replace it by a FixedText label + if (!mxBrochureBtn->get_visible() && mxPagesBtn->get_visible()) + { + mxPagesBoxTitleTxt->set_label(mxPagesBtn->get_label()); + mxPagesBoxTitleTxt->show(); + mxPagesBtn->hide(); + + mxPagesBoxTitleTxt->set_accessible_relation_label_for(mxNupPagesBox.get()); + mxNupPagesBox->set_accessible_relation_labeled_by(mxPagesBoxTitleTxt.get()); + mxPagesBtn->set_accessible_relation_label_for(nullptr); + } + + // update enable states + checkOptionalControlDependencies(); + + // print range not shown (currently math only) -> hide spacer line and reverse order + if (!mxPageRangeEdit->get_visible()) + { + mxReverseOrderBox->hide(); + } + + if (!mxCustomOptionsUIBuilder) + mxTabCtrl->remove_page(mxTabCtrl->get_page_ident(1)); +} + +void PrintDialog::makeEnabled( weld::Widget* i_pWindow ) +{ + auto it = maControlToPropertyMap.find( i_pWindow ); + if( it != maControlToPropertyMap.end() ) + { + OUString aDependency( maPController->makeEnabled( it->second ) ); + if( !aDependency.isEmpty() ) + updateWindowFromProperty( aDependency ); + } +} + +void PrintDialog::updateWindowFromProperty( const OUString& i_rProperty ) +{ + beans::PropertyValue* pValue = maPController->getValue( i_rProperty ); + auto it = maPropertyToWindowMap.find( i_rProperty ); + if( pValue && it != maPropertyToWindowMap.end() ) + { + const auto& rWindows( it->second ); + if( ! rWindows.empty() ) + { + bool bVal = false; + sal_Int32 nVal = -1; + if( pValue->Value >>= bVal ) + { + // we should have a CheckBox for this one + weld::CheckButton* pBox = dynamic_cast<weld::CheckButton*>(rWindows.front()); + if( pBox ) + { + pBox->set_active( bVal ); + } + else if ( i_rProperty == "PrintProspect" ) + { + // EVIL special case + if( bVal ) + mxBrochureBtn->set_active(true); + else + mxPagesBtn->set_active(true); + } + else + { + SAL_WARN( "vcl", "missing a checkbox" ); + } + } + else if( pValue->Value >>= nVal ) + { + // this could be a ListBox or a RadioButtonGroup + weld::ComboBox* pList = dynamic_cast<weld::ComboBox*>(rWindows.front()); + if( pList ) + { + pList->set_active( static_cast< sal_uInt16 >(nVal) ); + } + else if( nVal >= 0 && nVal < sal_Int32(rWindows.size() ) ) + { + weld::RadioButton* pBtn = dynamic_cast<weld::RadioButton*>(rWindows[nVal]); + SAL_WARN_IF( !pBtn, "vcl", "unexpected control for property" ); + if( pBtn ) + pBtn->set_active(true); + } + } + } + } +} + +bool PrintDialog::isPrintToFile() const +{ + return ( mxPrinters->get_active() == 0 ); +} + +bool PrintDialog::isCollate() const +{ + return mxCopyCountField->get_value() > 1 && mxCollateBox->get_active(); +} + +bool PrintDialog::hasPreview() const +{ + return mxPreviewBox->get_active(); +} + +PropertyValue* PrintDialog::getValueForWindow( weld::Widget* i_pWindow ) const +{ + PropertyValue* pVal = nullptr; + auto it = maControlToPropertyMap.find( i_pWindow ); + if( it != maControlToPropertyMap.end() ) + { + pVal = maPController->getValue( it->second ); + SAL_WARN_IF( !pVal, "vcl", "property value not found" ); + } + else + { + OSL_FAIL( "changed control not in property map" ); + } + return pVal; +} + +IMPL_LINK(PrintDialog, ToggleHdl, weld::ToggleButton&, rButton, void) +{ + ClickHdl(rButton); +} + +IMPL_LINK(PrintDialog, ClickHdl, weld::Button&, rButton, void) +{ + if (&rButton == mxOKButton.get() || &rButton == mxCancelButton.get()) + { + storeToSettings(); + m_xDialog->response(&rButton == mxOKButton.get() ? RET_OK : RET_CANCEL); + } + else if( &rButton == mxHelpButton.get() ) + { + // start help system + Help* pHelp = Application::GetHelp(); + if( pHelp ) + { + pHelp->Start("vcl/ui/printdialog/PrintDialog", mxOKButton.get()); + } + } + else if ( &rButton == mxPreviewBox.get() ) + { + preparePreview( true ); + } + else if( &rButton == mxForwardBtn.get() ) + { + previewForward(); + } + else if( &rButton == mxBackwardBtn.get() ) + { + previewBackward(); + } + else if( &rButton == mxFirstBtn.get() ) + { + previewFirst(); + } + else if( &rButton == mxLastBtn.get() ) + { + previewLast(); + } + else if( &rButton == mxBrochureBtn.get() ) + { + PropertyValue* pVal = getValueForWindow( &rButton ); + if( pVal ) + { + bool bVal = mxBrochureBtn->get_active(); + pVal->Value <<= bVal; + + checkOptionalControlDependencies(); + + // update preview and page settings + preparePreview(false); + } + if( mxBrochureBtn->get_active() ) + { + mxOrientationBox->set_sensitive( false ); + mxOrientationBox->set_active( ORIENTATION_LANDSCAPE ); + mxNupPagesBox->set_active( 0 ); + updateNupFromPages(); + showAdvancedControls( false ); + enableNupControls( false ); + } + } + else if( &rButton == mxPagesBtn.get() ) + { + mxOrientationBox->set_sensitive( true ); + mxOrientationBox->set_active( ORIENTATION_AUTOMATIC ); + enableNupControls( true ); + updateNupFromPages(); + } + else if( &rButton == mxCollateBox.get() ) + { + maPController->setValue( "Collate", + makeAny( isCollate() ) ); + checkControlDependencies(); + } + else if( &rButton == mxReverseOrderBox.get() ) + { + bool bChecked = mxReverseOrderBox->get_active(); + maPController->setReversePrint( bChecked ); + maPController->setValue( "PrintReverse", + makeAny( bChecked ) ); + preparePreview( true ); + } + else if( &rButton == mxBorderCB.get() ) + { + updateNup(); + } + else if ( &rButton == mxMoreOptionsBtn.get() ) + { + mxMoreOptionsDlg.reset(new MoreOptionsDialog(this)); + mxMoreOptionsDlg->run(); + } + else + { + if( &rButton == mxSetupButton.get() ) + { + maPController->setupPrinter(m_xDialog.get()); + + if ( !isPrintToFile() ) + { + VclPtr<Printer> aPrt( maPController->getPrinter() ); + mePaper = aPrt->GetPaper(); + + for (int nPaper = 0; nPaper < aPrt->GetPaperInfoCount(); nPaper++ ) + { + PaperInfo aInfo = aPrt->GetPaperInfo( nPaper ); + aInfo.doSloppyFit(); + Paper ePaper = aInfo.getPaper(); + + if ( mePaper == ePaper ) + { + mxPaperSizeBox->set_active( nPaper ); + break; + } + } + } + + updateOrientationBox( false ); + setupPaperSidesBox(); + + // tdf#63905 don't use cache: page size may change + preparePreview(false); + } + checkControlDependencies(); + } + +} + +IMPL_LINK( PrintDialog, SelectHdl, weld::ComboBox&, rBox, void ) +{ + if (&rBox == mxPrinters.get()) + { + if ( !isPrintToFile() ) + { + OUString aNewPrinter(rBox.get_active_text()); + // set new printer + maPController->setPrinter( VclPtrInstance<Printer>( aNewPrinter ) ); + maPController->resetPrinterOptions( false ); + + updateOrientationBox(); + + // update text fields + mxOKButton->set_label(maPrintText); + updatePrinterText(); + setPaperSizes(); + preparePreview(true); + } + else // print to file + { + // use the default printer or FIXME: the last used one? + maPController->setPrinter( VclPtrInstance<Printer>( Printer::GetDefaultPrinterName() ) ); + mxOKButton->set_label(maPrintToFileText); + maPController->resetPrinterOptions( true ); + + setPaperSizes(); + updateOrientationBox(); + preparePreview( true ); + } + + setupPaperSidesBox(); + } + else if ( &rBox == mxPaperSidesBox.get() ) + { + DuplexMode eDuplex = static_cast<DuplexMode>(mxPaperSidesBox->get_active() + 1); + maPController->getPrinter()->SetDuplexMode( eDuplex ); + } + else if( &rBox == mxOrientationBox.get() ) + { + int nOrientation = mxOrientationBox->get_active(); + if ( nOrientation != ORIENTATION_AUTOMATIC ) + setPaperOrientation( static_cast<Orientation>( nOrientation - 1 ) ); + + updateNup( false ); + } + else if ( &rBox == mxNupOrderBox.get() ) + { + updateNup(); + } + else if( &rBox == mxNupPagesBox.get() ) + { + if( !mxPagesBtn->get_active() ) + mxPagesBtn->set_active(true); + updateNupFromPages( false ); + } + else if ( &rBox == mxPaperSizeBox.get() ) + { + VclPtr<Printer> aPrt( maPController->getPrinter() ); + PaperInfo aInfo = aPrt->GetPaperInfo( rBox.get_active() ); + aInfo.doSloppyFit(); + mePaper = aInfo.getPaper(); + + if ( mePaper == PAPER_USER ) + aPrt->SetPaperSizeUser( Size( aInfo.getWidth(), aInfo.getHeight() ) ); + else + aPrt->SetPaper( mePaper ); + + Size aPaperSize( aInfo.getWidth(), aInfo.getHeight() ); + checkPaperSize( aPaperSize ); + maPController->setPaperSizeFromUser( aPaperSize ); + + preparePreview(true); + } +} + +IMPL_LINK_NOARG(PrintDialog, MetricSpinModifyHdl, weld::MetricSpinButton&, void) +{ + checkControlDependencies(); + updateNupFromPages(); +} + +IMPL_LINK_NOARG(PrintDialog, FocusOutHdl, weld::Widget&, void) +{ + ActivateHdl(*mxPageEdit); +} + +IMPL_LINK_NOARG(PrintDialog, ActivateHdl, weld::Entry&, bool) +{ + sal_Int32 nPage = mxPageEdit->get_text().toInt32(); + if (nPage < 1) + { + nPage = 1; + mxPageEdit->set_text("1"); + } + else if (nPage > mnCachedPages) + { + nPage = mnCachedPages; + mxPageEdit->set_text(OUString::number(mnCachedPages)); + } + int nNewCurPage = nPage - 1; + if (nNewCurPage != mnCurPage) + { + mnCurPage = nNewCurPage; + preparePreview(true); + } + return true; +} + +IMPL_LINK( PrintDialog, SpinModifyHdl, weld::SpinButton&, rEdit, void ) +{ + checkControlDependencies(); + if (&rEdit == mxNupRowsEdt.get() || &rEdit == mxNupColEdt.get()) + { + updateNupFromPages(); + } + else if( &rEdit == mxCopyCountField.get() ) + { + maPController->setValue( "CopyCount", + makeAny( sal_Int32(mxCopyCountField->get_value()) ) ); + maPController->setValue( "Collate", + makeAny( isCollate() ) ); + } +} + +IMPL_LINK( PrintDialog, UIOption_CheckHdl, weld::ToggleButton&, i_rBox, void ) +{ + PropertyValue* pVal = getValueForWindow( &i_rBox ); + if( pVal ) + { + makeEnabled( &i_rBox ); + + bool bVal = i_rBox.get_active(); + pVal->Value <<= bVal; + + checkOptionalControlDependencies(); + + // update preview and page settings + preparePreview(false); + } +} + +IMPL_LINK( PrintDialog, UIOption_RadioHdl, weld::ToggleButton&, i_rBtn, void ) +{ + // this handler gets called for all radiobuttons that get unchecked, too + // however we only want one notification for the new value (that is for + // the button that gets checked) + if( i_rBtn.get_active() ) + { + PropertyValue* pVal = getValueForWindow( &i_rBtn ); + auto it = maControlToNumValMap.find( &i_rBtn ); + if( pVal && it != maControlToNumValMap.end() ) + { + makeEnabled( &i_rBtn ); + + sal_Int32 nVal = it->second; + pVal->Value <<= nVal; + + updateOrientationBox(); + + checkOptionalControlDependencies(); + + // tdf#41205 give focus to the page range edit if the corresponding radio button was selected + if (pVal->Name == "PrintContent" && mxPageRangesRadioButton->get_active()) + mxPageRangeEdit->grab_focus(); + + // update preview and page settings + preparePreview(false); + } + } +} + +IMPL_LINK( PrintDialog, UIOption_SelectHdl, weld::ComboBox&, i_rBox, void ) +{ + PropertyValue* pVal = getValueForWindow( &i_rBox ); + if( pVal ) + { + makeEnabled( &i_rBox ); + + sal_Int32 nVal( i_rBox.get_active() ); + pVal->Value <<= nVal; + + //If we are in impress we start in print slides mode and get a + //maFirstPageSize for slides which are usually landscape mode, if we + //change to notes which are usually in portrait mode, and then visit + //n-up print, we will assume notes are in landscape unless we throw + //away maFirstPageSize when we change page content type + if (pVal->Name == "PageContentType") + maFirstPageSize = Size(); + + checkOptionalControlDependencies(); + + // update preview and page settings + preparePreview(false); + } +} + +IMPL_LINK( PrintDialog, UIOption_SpinModifyHdl, weld::SpinButton&, i_rBox, void ) +{ + PropertyValue* pVal = getValueForWindow( &i_rBox ); + if( pVal ) + { + makeEnabled( &i_rBox ); + + sal_Int64 nVal = i_rBox.get_value(); + pVal->Value <<= nVal; + + checkOptionalControlDependencies(); + + // update preview and page settings + preparePreview(false); + } +} + +IMPL_LINK( PrintDialog, UIOption_EntryModifyHdl, weld::Entry&, i_rBox, void ) +{ + PropertyValue* pVal = getValueForWindow( &i_rBox ); + if( pVal ) + { + makeEnabled( &i_rBox ); + + OUString aVal( i_rBox.get_text() ); + pVal->Value <<= aVal; + + checkOptionalControlDependencies(); + + // update preview and page settings + preparePreview(false); + } +} + +void PrintDialog::previewForward() +{ + sal_Int32 nValue = mxPageEdit->get_text().toInt32() + 1; + if (nValue <= mnCachedPages) + { + mxPageEdit->set_text(OUString::number(nValue)); + ActivateHdl(*mxPageEdit); + } +} + +void PrintDialog::previewBackward() +{ + sal_Int32 nValue = mxPageEdit->get_text().toInt32() - 1; + if (nValue >= 1) + { + mxPageEdit->set_text(OUString::number(nValue)); + ActivateHdl(*mxPageEdit); + } +} + +void PrintDialog::previewFirst() +{ + mxPageEdit->set_text("1"); + ActivateHdl(*mxPageEdit); +} + +void PrintDialog::previewLast() +{ + mxPageEdit->set_text(OUString::number(mnCachedPages)); + ActivateHdl(*mxPageEdit); +} + + +static OUString getNewLabel(const OUString& aLabel, int i_nCurr, int i_nMax) +{ + OUString aNewText( aLabel.replaceFirst( "%p", OUString::number( i_nCurr ) ) ); + aNewText = aNewText.replaceFirst( "%n", OUString::number( i_nMax ) ); + + return aNewText; +} + +// PrintProgressDialog +PrintProgressDialog::PrintProgressDialog(weld::Window* i_pParent, int i_nMax) + : GenericDialogController(i_pParent, "vcl/ui/printprogressdialog.ui", "PrintProgressDialog") + , mbCanceled(false) + , mnCur(0) + , mnMax(i_nMax) + , mxText(m_xBuilder->weld_label("label")) + , mxProgress(m_xBuilder->weld_progress_bar("progressbar")) + , mxButton(m_xBuilder->weld_button("cancel")) +{ + if( mnMax < 1 ) + mnMax = 1; + + maStr = mxText->get_label(); + + //just multiply largest value by 10 and take the width of that string as + //the max size we will want + mxText->set_label(getNewLabel(maStr, mnMax * 10, mnMax * 10)); + mxText->set_size_request(mxText->get_preferred_size().Width(), -1); + + //Pick a useful max width + mxProgress->set_size_request(mxProgress->get_approximate_digit_width() * 25, -1); + + mxButton->connect_clicked( LINK( this, PrintProgressDialog, ClickHdl ) ); + + // after this patch f7157f04fab298423e2c4f6a7e5f8e361164b15f, we have seen the calc Max string (sometimes) look above + // now init to the right start vaules + mxText->set_label(getNewLabel(maStr, mnCur, mnMax)); +} + +PrintProgressDialog::~PrintProgressDialog() +{ +} + +IMPL_LINK_NOARG(PrintProgressDialog, ClickHdl, weld::Button&, void) +{ + mbCanceled = true; +} + +void PrintProgressDialog::setProgress( int i_nCurrent ) +{ + mnCur = i_nCurrent; + + if( mnMax < 1 ) + mnMax = 1; + + mxText->set_label(getNewLabel(maStr, mnCur, mnMax)); + + // here view the dialog, with the right label + mxProgress->set_percentage(mnCur*100/mnMax); +} + +void PrintProgressDialog::tick() +{ + if( mnCur < mnMax ) + setProgress( ++mnCur ); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |