From 940b4d1848e8c70ab7642901a68594e8016caffc Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 18:51:28 +0200 Subject: Adding upstream version 1:7.0.4. Signed-off-by: Daniel Baumann --- chart2/source/controller/dialogs/res_ErrorBar.cxx | 718 ++++++++++++++++++++++ 1 file changed, 718 insertions(+) create mode 100644 chart2/source/controller/dialogs/res_ErrorBar.cxx (limited to 'chart2/source/controller/dialogs/res_ErrorBar.cxx') diff --git a/chart2/source/controller/dialogs/res_ErrorBar.cxx b/chart2/source/controller/dialogs/res_ErrorBar.cxx new file mode 100644 index 000000000..aaa1c6eed --- /dev/null +++ b/chart2/source/controller/dialogs/res_ErrorBar.cxx @@ -0,0 +1,718 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define CHART_LB_FUNCTION_STD_ERROR 0 +#define CHART_LB_FUNCTION_STD_DEV 1 +#define CHART_LB_FUNCTION_VARIANCE 2 +#define CHART_LB_FUNCTION_ERROR_MARGIN 3 + +using namespace ::com::sun::star; + +namespace +{ +void lcl_enableRangeChoosing(bool bEnable, weld::DialogController* pController) +{ + weld::Window* pWeldDialog = pController->getDialog(); + pWeldDialog->set_modal(!bEnable); + pWeldDialog->set_visible(!bEnable); +} + +sal_uInt16 lcl_getLbEntryPosByErrorKind( SvxChartKindError eErrorKind ) +{ + sal_uInt16 nResult = 0; + switch( eErrorKind ) + { + // for these cases select the default in the list box + case SvxChartKindError::NONE: + case SvxChartKindError::Percent: + case SvxChartKindError::Const: + case SvxChartKindError::Range: + nResult = CHART_LB_FUNCTION_STD_DEV; + break; + case SvxChartKindError::Variant: + nResult = CHART_LB_FUNCTION_VARIANCE; + break; + case SvxChartKindError::Sigma: + nResult = CHART_LB_FUNCTION_STD_DEV; + break; + case SvxChartKindError::BigError: + nResult = CHART_LB_FUNCTION_ERROR_MARGIN; + break; + case SvxChartKindError::StdError: + nResult = CHART_LB_FUNCTION_STD_ERROR; + break; + } + return nResult; +} +} // anonymous namespace + +namespace chart +{ + +ErrorBarResources::ErrorBarResources(weld::Builder* pParent, weld::DialogController* pController, + const SfxItemSet& rInAttrs, bool bNoneAvailable, + tErrorBarType eType /* = ERROR_BAR_Y */ ) + : m_eErrorKind( SvxChartKindError::NONE ) + , m_eIndicate( SvxChartIndicate::Both ) + , m_bErrorKindUnique( true ) + , m_bIndicatorUnique( true ) + , m_bRangePosUnique( true ) + , m_bRangeNegUnique( true ) + , m_eErrorBarType( eType ) + , m_nConstDecimalDigits( 1 ) + , m_nConstSpinSize( 1 ) + , m_fPlusValue(0.0) + , m_fMinusValue(0.0) + , m_pController(pController) + , m_pCurrentRangeChoosingField( nullptr ) + , m_bHasInternalDataProvider( true ) + , m_bEnableDataTableDialog( true ) + , m_xRbNone(pParent->weld_radio_button("RB_NONE")) + , m_xRbConst(pParent->weld_radio_button("RB_CONST")) + , m_xRbPercent(pParent->weld_radio_button("RB_PERCENT")) + , m_xRbFunction(pParent->weld_radio_button("RB_FUNCTION")) + , m_xRbRange(pParent->weld_radio_button("RB_RANGE")) + , m_xLbFunction(pParent->weld_combo_box("LB_FUNCTION")) + , m_xFlParameters(pParent->weld_frame("framePARAMETERS")) + , m_xBxPositive(pParent->weld_widget("boxPOSITIVE")) + , m_xMfPositive(pParent->weld_metric_spin_button("MF_POSITIVE", FieldUnit::NONE)) + , m_xEdRangePositive(pParent->weld_entry("ED_RANGE_POSITIVE")) + , m_xIbRangePositive(pParent->weld_button("IB_RANGE_POSITIVE")) + , m_xBxNegative(pParent->weld_widget("boxNEGATIVE")) + , m_xMfNegative(pParent->weld_metric_spin_button("MF_NEGATIVE", FieldUnit::NONE)) + , m_xEdRangeNegative(pParent->weld_entry("ED_RANGE_NEGATIVE")) + , m_xIbRangeNegative(pParent->weld_button("IB_RANGE_NEGATIVE")) + , m_xCbSyncPosNeg(pParent->weld_check_button("CB_SYN_POS_NEG")) + , m_xRbBoth(pParent->weld_radio_button("RB_BOTH")) + , m_xRbPositive(pParent->weld_radio_button("RB_POSITIVE")) + , m_xRbNegative(pParent->weld_radio_button("RB_NEGATIVE")) + , m_xFiBoth(pParent->weld_image("FI_BOTH")) + , m_xFiPositive(pParent->weld_image("FI_POSITIVE")) + , m_xFiNegative(pParent->weld_image("FI_NEGATIVE")) + , m_xUIStringPos(pParent->weld_label("STR_DATA_SELECT_RANGE_FOR_POSITIVE_ERRORBARS")) + , m_xUIStringNeg(pParent->weld_label("STR_DATA_SELECT_RANGE_FOR_NEGATIVE_ERRORBARS")) + , m_xUIStringRbRange(pParent->weld_label("STR_CONTROLTEXT_ERROR_BARS_FROM_DATA")) +{ + if( bNoneAvailable ) + m_xRbNone->connect_toggled(LINK(this, ErrorBarResources, CategoryChosen)); + else + m_xRbNone->hide(); + + m_xRbConst->connect_toggled( LINK( this, ErrorBarResources, CategoryChosen )); + m_xRbPercent->connect_toggled( LINK( this, ErrorBarResources, CategoryChosen )); + m_xRbFunction->connect_toggled( LINK( this, ErrorBarResources, CategoryChosen )); + m_xRbRange->connect_toggled( LINK( this, ErrorBarResources, CategoryChosen )); + m_xLbFunction->connect_changed( LINK( this, ErrorBarResources, CategoryChosen2 )); + + m_xCbSyncPosNeg->set_active( false ); + m_xCbSyncPosNeg->connect_toggled( LINK( this, ErrorBarResources, SynchronizePosAndNeg )); + + m_xMfPositive->connect_value_changed( LINK( this, ErrorBarResources, PosValueChanged )); + m_xEdRangePositive->connect_changed( LINK( this, ErrorBarResources, RangeChanged )); + m_xEdRangeNegative->connect_changed( LINK( this, ErrorBarResources, RangeChanged )); + + m_xRbPositive->connect_toggled( LINK( this, ErrorBarResources, IndicatorChanged )); + m_xRbNegative->connect_toggled( LINK( this, ErrorBarResources, IndicatorChanged )); + m_xRbBoth->connect_toggled( LINK( this, ErrorBarResources, IndicatorChanged )); + + m_xIbRangePositive->connect_clicked( LINK( this, ErrorBarResources, ChooseRange )); + m_xIbRangeNegative->connect_clicked( LINK( this, ErrorBarResources, ChooseRange )); + + FillValueSets(); + Reset( rInAttrs ); +} + +ErrorBarResources::~ErrorBarResources() +{ +} + +void ErrorBarResources::SetErrorBarType( tErrorBarType eNewType ) +{ + if( m_eErrorBarType != eNewType ) + { + m_eErrorBarType = eNewType; + FillValueSets(); + } +} + +void ErrorBarResources::SetChartDocumentForRangeChoosing( + const uno::Reference< chart2::XChartDocument > & xChartDocument ) +{ + if( xChartDocument.is()) + { + m_bHasInternalDataProvider = xChartDocument->hasInternalDataProvider(); + uno::Reference< beans::XPropertySet > xProps( xChartDocument, uno::UNO_QUERY ); + if ( xProps.is() ) + { + try + { + xProps->getPropertyValue("EnableDataTableDialog") >>= m_bEnableDataTableDialog; + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + } + } + m_apRangeSelectionHelper.reset( new RangeSelectionHelper( xChartDocument )); + + // has internal data provider => rename "cell range" to "from data" + OSL_ASSERT(m_apRangeSelectionHelper); + if( m_bHasInternalDataProvider ) + { + m_xRbRange->set_label(m_xUIStringRbRange->get_label()); + m_xRbRange->set_help_id(HID_SCH_ERROR_BARS_FROM_DATA); + } + + if( m_xRbRange->get_active()) + { + isRangeFieldContentValid( *m_xEdRangePositive ); + isRangeFieldContentValid( *m_xEdRangeNegative ); + } +} + +void ErrorBarResources::SetAxisMinorStepWidthForErrorBarDecimals( double fMinorStepWidth ) +{ + if( fMinorStepWidth < 0 ) + fMinorStepWidth = -fMinorStepWidth; + + sal_Int32 nExponent = static_cast< sal_Int32 >( ::rtl::math::approxFloor( log10( fMinorStepWidth ))); + if( nExponent <= 0 ) + { + // one digit precision more + m_nConstDecimalDigits = static_cast< sal_uInt16 >( (-nExponent) + 1 ); + m_nConstSpinSize = 10; + } + else + { + m_nConstDecimalDigits = 0; + m_nConstSpinSize = static_cast< sal_Int64 >( pow( 10.0, static_cast(nExponent) )); + } +} + +void ErrorBarResources::UpdateControlStates() +{ + // function + bool bIsFunction = m_xRbFunction->get_active(); + m_xLbFunction->set_sensitive( bIsFunction ); + + // range buttons + m_xRbRange->set_sensitive( !m_bHasInternalDataProvider || m_bEnableDataTableDialog ); + bool bShowRange = m_xRbRange->get_active(); + bool bCanChooseRange = + ( bShowRange && + m_apRangeSelectionHelper && + m_apRangeSelectionHelper->hasRangeSelection()); + + m_xMfPositive->set_visible( ! bShowRange ); + m_xMfNegative->set_visible( ! bShowRange ); + + // use range but without range chooser => hide controls + m_xEdRangePositive->set_visible( bShowRange && ! m_bHasInternalDataProvider ); + m_xIbRangePositive->set_visible( bCanChooseRange ); + m_xEdRangeNegative->set_visible( bShowRange && ! m_bHasInternalDataProvider ); + m_xIbRangeNegative->set_visible( bCanChooseRange ); + + bool bShowPosNegAndSync = ! (bShowRange && m_bHasInternalDataProvider); + m_xFlParameters->set_visible( bShowPosNegAndSync ); + + // unit for metric fields + bool bIsErrorMargin( + ( m_xRbFunction->get_active()) && + ( m_xLbFunction->get_active() == CHART_LB_FUNCTION_ERROR_MARGIN )); + bool bIsPercentage( m_xRbPercent->get_active() || bIsErrorMargin ); + FieldUnit eFieldUnit = FieldUnit::NONE; + + if( bIsPercentage ) + { + eFieldUnit = FieldUnit::PERCENT; + m_xMfPositive->set_digits( 1 ); + m_xMfPositive->set_increments(10, 100, FieldUnit::NONE); + m_xMfNegative->set_digits( 1 ); + m_xMfNegative->set_increments(10, 100, FieldUnit::NONE); + } + else + { + m_xMfPositive->set_digits( m_nConstDecimalDigits ); + m_xMfPositive->set_increments(m_nConstSpinSize, m_nConstSpinSize * 10, FieldUnit::NONE); + m_xMfNegative->set_digits( m_nConstDecimalDigits ); + m_xMfNegative->set_increments(m_nConstSpinSize, m_nConstSpinSize * 10, FieldUnit::NONE); + } + + sal_Int32 nPlusValue = static_cast< sal_Int32 >( m_fPlusValue * pow(10.0,m_xMfPositive->get_digits()) ); + sal_Int32 nMinusValue = static_cast< sal_Int32 >( m_fMinusValue * pow(10.0,m_xMfNegative->get_digits()) ); + + m_xMfPositive->set_value(nPlusValue, FieldUnit::NONE); + m_xMfNegative->set_value(nMinusValue, FieldUnit::NONE); + + m_xMfPositive->set_unit(eFieldUnit); + m_xMfNegative->set_unit(eFieldUnit); + + // positive and negative value fields + bool bPosEnabled = ( m_xRbPositive->get_active() || m_xRbBoth->get_active()); + bool bNegEnabled = ( m_xRbNegative->get_active() || m_xRbBoth->get_active()); + if( !( bPosEnabled || bNegEnabled )) + { + // all three controls are not checked -> ambiguous state + bPosEnabled = true; + bNegEnabled = true; + } + + // functions with only one parameter + bool bOneParameterCategory = + bIsErrorMargin || m_xRbPercent->get_active(); + if( bOneParameterCategory ) + { + m_xCbSyncPosNeg->set_active(true); + } + + if( m_xCbSyncPosNeg->get_active()) + { + bPosEnabled = true; + bNegEnabled = false; + } + + // all functions except error margin take no arguments + if( m_xRbFunction->get_active() && ( m_xLbFunction->get_active() != CHART_LB_FUNCTION_ERROR_MARGIN )) + { + bPosEnabled = false; + bNegEnabled = false; + } + + // enable/disable pos/neg fields + m_xBxPositive->set_sensitive( bPosEnabled ); + m_xBxNegative->set_sensitive( bNegEnabled ); + if( bShowRange ) + { + m_xEdRangePositive->set_sensitive( bPosEnabled ); + m_xIbRangePositive->set_sensitive( bPosEnabled ); + m_xEdRangeNegative->set_sensitive( bNegEnabled ); + m_xIbRangeNegative->set_sensitive( bNegEnabled ); + } + else + { + m_xMfPositive->set_sensitive( bPosEnabled ); + m_xMfNegative->set_sensitive( bNegEnabled ); + } + + m_xCbSyncPosNeg->set_sensitive( !bOneParameterCategory && ( bPosEnabled || bNegEnabled )); + + // mark invalid entries in the range fields + if( bShowRange && ! m_bHasInternalDataProvider ) + { + isRangeFieldContentValid( *m_xEdRangePositive ); + isRangeFieldContentValid( *m_xEdRangeNegative ); + } +} + +IMPL_LINK_NOARG( ErrorBarResources, CategoryChosen2, weld::ComboBox&, void ) +{ + CategoryChosen(*m_xRbConst); +} + +IMPL_LINK_NOARG( ErrorBarResources, CategoryChosen, weld::ToggleButton&, void ) +{ + m_bErrorKindUnique = true; + SvxChartKindError eOldError = m_eErrorKind; + + if( m_xRbNone->get_active()) + m_eErrorKind = SvxChartKindError::NONE; + else if( m_xRbConst->get_active()) + m_eErrorKind = SvxChartKindError::Const; + else if( m_xRbPercent->get_active()) + m_eErrorKind = SvxChartKindError::Percent; + else if( m_xRbRange->get_active()) + m_eErrorKind = SvxChartKindError::Range; + else if( m_xRbFunction->get_active()) + { + switch( m_xLbFunction->get_active()) + { + case CHART_LB_FUNCTION_STD_ERROR: + m_eErrorKind = SvxChartKindError::StdError; break; + case CHART_LB_FUNCTION_STD_DEV: + m_eErrorKind = SvxChartKindError::Sigma; break; + case CHART_LB_FUNCTION_VARIANCE: + m_eErrorKind = SvxChartKindError::Variant; break; + case CHART_LB_FUNCTION_ERROR_MARGIN: + m_eErrorKind = SvxChartKindError::BigError; break; + default: + m_bErrorKindUnique = false; + } + } + else + { + OSL_FAIL( "Unknown category chosen" ); + m_bErrorKindUnique = false; + } + + // changed to range + if( m_eErrorKind == SvxChartKindError::Range && + eOldError != SvxChartKindError::Range ) + { + m_xCbSyncPosNeg->set_active( + (!m_xEdRangePositive->get_text().isEmpty()) && + m_xEdRangePositive->get_text() == m_xEdRangeNegative->get_text()); + } + // changed from range + else if( m_eErrorKind != SvxChartKindError::Range && + eOldError == SvxChartKindError::Range ) + { + m_xCbSyncPosNeg->set_active( m_xMfPositive->get_value(FieldUnit::NONE) == m_xMfNegative->get_value(FieldUnit::NONE)); + } + + UpdateControlStates(); +} + +IMPL_LINK_NOARG(ErrorBarResources, SynchronizePosAndNeg, weld::ToggleButton&, void) +{ + UpdateControlStates(); + PosValueChanged( *m_xMfPositive ); +} + +IMPL_LINK_NOARG(ErrorBarResources, PosValueChanged, weld::MetricSpinButton&, void) +{ + if( m_xCbSyncPosNeg->get_active()) + { + if( m_xRbRange->get_active()) + { + m_xEdRangeNegative->set_text( m_xEdRangePositive->get_text()); + m_bRangeNegUnique = m_bRangePosUnique; + } + else + m_xMfNegative->set_value(m_xMfPositive->get_value(FieldUnit::NONE), FieldUnit::NONE); + } +} + +IMPL_LINK_NOARG(ErrorBarResources, IndicatorChanged, weld::ToggleButton&, void) +{ + m_bIndicatorUnique = true; + if( m_xRbBoth->get_active()) + m_eIndicate = SvxChartIndicate::Both; + else if( m_xRbPositive->get_active()) + m_eIndicate = SvxChartIndicate::Up; + else if( m_xRbNegative->get_active()) + m_eIndicate = SvxChartIndicate::Down; + else + m_bIndicatorUnique = false; + + UpdateControlStates(); +} + +IMPL_LINK(ErrorBarResources, ChooseRange, weld::Button&, rButton, void) +{ + OSL_ASSERT(m_apRangeSelectionHelper); + if (!m_apRangeSelectionHelper) + return; + OSL_ASSERT( m_pCurrentRangeChoosingField == nullptr ); + + OUString aUIString; + + if (&rButton == m_xIbRangePositive.get()) + { + m_pCurrentRangeChoosingField = m_xEdRangePositive.get(); + aUIString = m_xUIStringPos->get_label(); + } + else + { + m_pCurrentRangeChoosingField = m_xEdRangeNegative.get(); + aUIString = m_xUIStringNeg->get_label(); + } + + lcl_enableRangeChoosing(true, m_pController); + m_apRangeSelectionHelper->chooseRange( + m_pCurrentRangeChoosingField->get_text(), + aUIString, *this ); +} + +IMPL_LINK( ErrorBarResources, RangeChanged, weld::Entry&, rEdit, void ) +{ + if( &rEdit == m_xEdRangePositive.get() ) + { + m_bRangePosUnique = true; + PosValueChanged( *m_xMfPositive ); + } + else + { + m_bRangeNegUnique = true; + } + + isRangeFieldContentValid( rEdit ); +} + +void ErrorBarResources::Reset(const SfxItemSet& rInAttrs) +{ + const SfxPoolItem *pPoolItem = nullptr; + + // category + m_eErrorKind = SvxChartKindError::NONE; + SfxItemState aState = rInAttrs.GetItemState( SCHATTR_STAT_KIND_ERROR, true, &pPoolItem ); + m_bErrorKindUnique = ( aState != SfxItemState::DONTCARE ); + + if( aState == SfxItemState::SET ) + m_eErrorKind = static_cast(pPoolItem)->GetValue(); + + m_xLbFunction->set_active( lcl_getLbEntryPosByErrorKind( m_eErrorKind )); + + if( m_bErrorKindUnique ) + { + switch( m_eErrorKind ) + { + case SvxChartKindError::NONE: + m_xRbNone->set_active(true); + break; + case SvxChartKindError::Percent: + m_xRbPercent->set_active(true); + break; + case SvxChartKindError::Const: + m_xRbConst->set_active(true); + break; + case SvxChartKindError::StdError: + case SvxChartKindError::Variant: + case SvxChartKindError::Sigma: + case SvxChartKindError::BigError: + m_xRbFunction->set_active(true); + break; + case SvxChartKindError::Range: + m_xRbRange->set_active(true); + break; + } + } + else + { + m_xRbNone->set_active( false ); + m_xRbConst->set_active( false ); + m_xRbPercent->set_active( false ); + m_xRbFunction->set_active( false ); + } + + // parameters + aState = rInAttrs.GetItemState( SCHATTR_STAT_CONSTPLUS, true, &pPoolItem ); + if( aState == SfxItemState::SET ) + { + m_fPlusValue = static_cast(pPoolItem)->GetValue(); + } + + aState = rInAttrs.GetItemState( SCHATTR_STAT_CONSTMINUS, true, &pPoolItem ); + if( aState == SfxItemState::SET ) + { + m_fMinusValue = static_cast(pPoolItem)->GetValue(); + + if( m_eErrorKind != SvxChartKindError::Range && + m_fPlusValue == m_fMinusValue ) + m_xCbSyncPosNeg->set_active(true); + } + + // indicator + aState = rInAttrs.GetItemState( SCHATTR_STAT_INDICATE, true, &pPoolItem ); + m_bIndicatorUnique = ( aState != SfxItemState::DONTCARE ); + if( aState == SfxItemState::SET) + m_eIndicate = static_cast(pPoolItem)->GetValue(); + + if( m_bIndicatorUnique ) + { + switch( m_eIndicate ) + { + case SvxChartIndicate::NONE : + // no longer used, use both as default + m_eIndicate = SvxChartIndicate::Both; + [[fallthrough]]; // to BOTH + case SvxChartIndicate::Both : + m_xRbBoth->set_active(true); break; + case SvxChartIndicate::Up : + m_xRbPositive->set_active(true); break; + case SvxChartIndicate::Down : + m_xRbNegative->set_active(true); break; + } + } + else + { + m_xRbBoth->set_active( false ); + m_xRbPositive->set_active( false ); + m_xRbNegative->set_active( false ); + } + + // ranges + aState = rInAttrs.GetItemState( SCHATTR_STAT_RANGE_POS, true, &pPoolItem ); + m_bRangePosUnique = ( aState != SfxItemState::DONTCARE ); + if( aState == SfxItemState::SET ) + { + OUString sRangePositive = static_cast< const SfxStringItem * >( pPoolItem )->GetValue(); + m_xEdRangePositive->set_text( sRangePositive ); + } + + aState = rInAttrs.GetItemState( SCHATTR_STAT_RANGE_NEG, true, &pPoolItem ); + m_bRangeNegUnique = ( aState != SfxItemState::DONTCARE ); + if( aState == SfxItemState::SET ) + { + OUString sRangeNegative = static_cast< const SfxStringItem * >( pPoolItem )->GetValue(); + m_xEdRangeNegative->set_text( sRangeNegative ); + if( m_eErrorKind == SvxChartKindError::Range && + !sRangeNegative.isEmpty() && + sRangeNegative == m_xEdRangePositive->get_text() ) + m_xCbSyncPosNeg->set_active(true); + } + + UpdateControlStates(); +} + +void ErrorBarResources::FillItemSet(SfxItemSet& rOutAttrs) const +{ + if( m_bErrorKindUnique ) + rOutAttrs.Put( SvxChartKindErrorItem( m_eErrorKind, SCHATTR_STAT_KIND_ERROR )); + if( m_bIndicatorUnique ) + rOutAttrs.Put( SvxChartIndicateItem( m_eIndicate, SCHATTR_STAT_INDICATE )); + + if( m_bErrorKindUnique ) + { + if( m_eErrorKind == SvxChartKindError::Range ) + { + OUString aPosRange; + OUString aNegRange; + if( m_bHasInternalDataProvider ) + { + // the strings aPosRange/aNegRange have to be set to a non-empty + // arbitrary string to generate error-bar sequences + aPosRange = "x"; + aNegRange = aPosRange; + } + else + { + aPosRange = m_xEdRangePositive->get_text(); + if( m_xCbSyncPosNeg->get_active()) + aNegRange = aPosRange; + else + aNegRange = m_xEdRangeNegative->get_text(); + } + + if( m_bRangePosUnique ) + rOutAttrs.Put( SfxStringItem( SCHATTR_STAT_RANGE_POS, aPosRange )); + if( m_bRangeNegUnique ) + rOutAttrs.Put( SfxStringItem( SCHATTR_STAT_RANGE_NEG, aNegRange )); + } + else if( m_eErrorKind == SvxChartKindError::Const || + m_eErrorKind == SvxChartKindError::Percent || + m_eErrorKind == SvxChartKindError::BigError ) + { + double fPosValue = static_cast< double >( m_xMfPositive->get_value(FieldUnit::NONE)) / + pow( 10.0, m_xMfPositive->get_digits()); + double fNegValue = 0.0; + + if( m_xCbSyncPosNeg->get_active()) + fNegValue = fPosValue; + else + fNegValue = static_cast< double >( m_xMfNegative->get_value(FieldUnit::NONE)) / + pow( 10.0, m_xMfNegative->get_digits()); + + rOutAttrs.Put( SvxDoubleItem( fPosValue, SCHATTR_STAT_CONSTPLUS )); + rOutAttrs.Put( SvxDoubleItem( fNegValue, SCHATTR_STAT_CONSTMINUS )); + } + } + + rOutAttrs.Put( SfxBoolItem( SCHATTR_STAT_ERRORBAR_TYPE , m_eErrorBarType == ERROR_BAR_Y )); +} + +void ErrorBarResources::FillValueSets() +{ + if( m_eErrorBarType == ERROR_BAR_Y ) + { + m_xFiNegative->set_from_icon_name(BMP_INDICATE_DOWN); + m_xFiPositive->set_from_icon_name(BMP_INDICATE_UP); + m_xFiBoth->set_from_icon_name(BMP_INDICATE_BOTH_VERTI); + } + else if( m_eErrorBarType == ERROR_BAR_X ) + { + m_xFiNegative->set_from_icon_name(BMP_INDICATE_LEFT); + m_xFiPositive->set_from_icon_name(BMP_INDICATE_RIGHT); + m_xFiBoth->set_from_icon_name(BMP_INDICATE_BOTH_HORI); + } +} + +void ErrorBarResources::listeningFinished( + const OUString & rNewRange ) +{ + OSL_ASSERT(m_apRangeSelectionHelper); + if (!m_apRangeSelectionHelper) + return; + + // rNewRange becomes invalid after removing the listener + OUString aRange( rNewRange ); + + // stop listening + m_apRangeSelectionHelper->stopRangeListening(); + + // change edit field +// if( m_pParentWindow ) +// { +// m_pParentWindow->ToTop(); +// m_pParentWindow->grab_focus(); +// } + + if( m_pCurrentRangeChoosingField ) + { + m_pCurrentRangeChoosingField->set_text( aRange ); + m_pCurrentRangeChoosingField->grab_focus(); + PosValueChanged( *m_xMfPositive ); + } + + m_pCurrentRangeChoosingField = nullptr; + + UpdateControlStates(); + lcl_enableRangeChoosing(false, m_pController); +} + +void ErrorBarResources::disposingRangeSelection() +{ + OSL_ASSERT(m_apRangeSelectionHelper); + if (m_apRangeSelectionHelper) + m_apRangeSelectionHelper->stopRangeListening( false ); +} + +void ErrorBarResources::isRangeFieldContentValid(weld::Entry& rEdit) +{ + OUString aRange( rEdit.get_text()); + bool bIsValid = ( aRange.isEmpty() ) || + ( m_apRangeSelectionHelper && + m_apRangeSelectionHelper->verifyCellRange( aRange )); + + if( bIsValid || !rEdit.get_sensitive()) + { + rEdit.set_message_type(weld::EntryMessageType::Normal); + } + else + { + rEdit.set_message_type(weld::EntryMessageType::Error); + } +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3